From 9674f35b1ec17577163897f052f405c1e9e5893d Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Fri, 3 Apr 2009 08:34:05 -0500
Subject: [PATCH 0001/1421] x86: UV BAU and nodes with no memory

This patch fixes BAU initialization for systems containing
nodes with no memory and for systems with non-consecutive
node numbers.

Fixes and clarifies situations where pnode should be used instead
of node id.

Tested on the UV hardware simulator.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1LpjX3-00007N-12@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 108 ++++++++++++++++++++++-----------------
 1 file changed, 61 insertions(+), 47 deletions(-)

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 79c07324728..b833bc634d1 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -31,6 +31,34 @@ static unsigned long		uv_mmask __read_mostly;
 static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
 static DEFINE_PER_CPU(struct bau_control, bau_control);
 
+/*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+	int node, b;
+
+	for_each_online_node(node) {
+		b = uv_node_to_blade_id(node);
+		if (blade == b)
+			return node;
+	}
+	BUG();
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+	int cpu;
+
+	for_each_present_cpu(cpu)
+		if (blade == uv_cpu_to_blade_id(cpu))
+			return per_cpu(x86_cpu_to_apicid, cpu);
+	return -1;
+}
+
 /*
  * Free a software acknowledge hardware resource by clearing its Pending
  * bit. This will return a reply to the sender.
@@ -67,7 +95,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg,
 	msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
 	cpu = uv_blade_processor_id();
 	msg->number_of_cpus =
-	    uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+		uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
 	this_cpu_mask = 1UL << cpu;
 	if (msp->seen_by.bits & this_cpu_mask)
 		return;
@@ -215,14 +243,14 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
  * Returns @flush_mask if some remote flushing remains to be done. The
  * mask will have some bits still set.
  */
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
 					     struct bau_desc *bau_desc,
 					     struct cpumask *flush_mask)
 {
 	int completion_status = 0;
 	int right_shift;
 	int tries = 0;
-	int blade;
+	int pnode;
 	int bit;
 	unsigned long mmr_offset;
 	unsigned long index;
@@ -265,8 +293,8 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
 	 * use the IPI method of shootdown on them.
 	 */
 	for_each_cpu(bit, flush_mask) {
-		blade = uv_cpu_to_blade_id(bit);
-		if (blade == this_blade)
+		pnode = uv_cpu_to_pnode(bit);
+		if (pnode == this_pnode)
 			continue;
 		cpumask_clear_cpu(bit, flush_mask);
 	}
@@ -308,16 +336,16 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 	struct cpumask *flush_mask = &__get_cpu_var(flush_tlb_mask);
 	int i;
 	int bit;
-	int blade;
+	int pnode;
 	int uv_cpu;
-	int this_blade;
+	int this_pnode;
 	int locals = 0;
 	struct bau_desc *bau_desc;
 
 	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
 
 	uv_cpu = uv_blade_processor_id();
-	this_blade = uv_numa_blade_id();
+	this_pnode = uv_hub_info->pnode;
 	bau_desc = __get_cpu_var(bau_control).descriptor_base;
 	bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
 
@@ -325,13 +353,13 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 
 	i = 0;
 	for_each_cpu(bit, flush_mask) {
-		blade = uv_cpu_to_blade_id(bit);
-		BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
-		if (blade == this_blade) {
+		pnode = uv_cpu_to_pnode(bit);
+		BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+		if (pnode == this_pnode) {
 			locals++;
 			continue;
 		}
-		bau_node_set(blade, &bau_desc->distribution);
+		bau_node_set(pnode, &bau_desc->distribution);
 		i++;
 	}
 	if (i == 0) {
@@ -349,7 +377,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 	bau_desc->payload.address = va;
 	bau_desc->payload.sending_cpu = cpu;
 
-	return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+	return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
 }
 
 /*
@@ -481,8 +509,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data)
 			   stat->requestee, stat->onetlb, stat->alltlb,
 			   stat->s_retry, stat->d_retry, stat->ptc_i);
 		seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
-			   uv_read_global_mmr64(uv_blade_to_pnode
-					(uv_cpu_to_blade_id(cpu)),
+			   uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
 					UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
 			   stat->sflush, stat->dflush,
 			   stat->retriesok, stat->nomsg,
@@ -616,16 +643,18 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node)
  * finish the initialization of the per-blade control structures
  */
 static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
 		      struct bau_control *bau_tablesp,
 		      struct bau_desc *adp)
 {
 	struct bau_control *bcp;
-	int i;
+	int cpu;
 
-	for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
-		bcp = (struct bau_control *)&per_cpu(bau_control, i);
+	for_each_present_cpu(cpu) {
+		if (blade != uv_cpu_to_blade_id(cpu))
+			continue;
 
+		bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
 		bcp->bau_msg_head	= bau_tablesp->va_queue_first;
 		bcp->va_queue_first	= bau_tablesp->va_queue_first;
 		bcp->va_queue_last	= bau_tablesp->va_queue_last;
@@ -648,8 +677,7 @@ uv_activation_descriptor_init(int node, int pnode)
 	struct bau_desc *adp;
 	struct bau_desc *ad2;
 
-	adp = (struct bau_desc *)
-	    kmalloc_node(16384, GFP_KERNEL, node);
+	adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
 	BUG_ON(!adp);
 
 	pa = __pa((unsigned long)adp);
@@ -666,8 +694,7 @@ uv_activation_descriptor_init(int node, int pnode)
 	for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
 		memset(ad2, 0, sizeof(struct bau_desc));
 		ad2->header.sw_ack_flag = 1;
-		ad2->header.base_dest_nodeid =
-		    uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+		ad2->header.base_dest_nodeid = uv_cpu_to_pnode(0);
 		ad2->header.command = UV_NET_ENDPOINT_INTD;
 		ad2->header.int_both = 1;
 		/*
@@ -714,8 +741,9 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
 /*
  * Initialization of each UV blade's structures
  */
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
 {
+	int node;
 	int pnode;
 	unsigned long pa;
 	unsigned long apicid;
@@ -723,16 +751,17 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu)
 	struct bau_payload_queue_entry *pqp;
 	struct bau_control *bau_tablesp;
 
+	node = blade_to_first_node(blade);
 	bau_tablesp = uv_table_bases_init(blade, node);
 	pnode = uv_blade_to_pnode(blade);
 	adp = uv_activation_descriptor_init(node, pnode);
 	pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
-	uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+	uv_table_bases_finish(blade, bau_tablesp, adp);
 	/*
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+	apicid = blade_to_first_apicid(blade);
 	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
 	if ((pa & 0xff) != UV_BAU_MESSAGE) {
 		uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -747,9 +776,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu)
 static int __init uv_bau_init(void)
 {
 	int blade;
-	int node;
 	int nblades;
-	int last_blade;
 	int cur_cpu;
 
 	if (!is_uv_system())
@@ -758,29 +785,16 @@ static int __init uv_bau_init(void)
 	uv_bau_retry_limit = 1;
 	uv_nshift = uv_hub_info->n_val;
 	uv_mmask = (1UL << uv_hub_info->n_val) - 1;
-	nblades = 0;
-	last_blade = -1;
-	cur_cpu = 0;
-	for_each_online_node(node) {
-		blade = uv_node_to_blade_id(node);
-		if (blade == last_blade)
-			continue;
-		last_blade = blade;
-		nblades++;
-	}
+	nblades = uv_num_possible_blades();
+
 	uv_bau_table_bases = (struct bau_control **)
 	    kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
 	BUG_ON(!uv_bau_table_bases);
 
-	last_blade = -1;
-	for_each_online_node(node) {
-		blade = uv_node_to_blade_id(node);
-		if (blade == last_blade)
-			continue;
-		last_blade = blade;
-		uv_init_blade(blade, node, cur_cpu);
-		cur_cpu += uv_blade_nr_possible_cpus(blade);
-	}
+	for (blade = 0; blade < nblades; blade++)
+		if (uv_blade_nr_possible_cpus(blade))
+			uv_init_blade(blade);
+
 	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
 	uv_enable_timeouts();
 
-- 
GitLab


From c4c4688f72e638708e5f6b5c259699de82a36fec Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Fri, 3 Apr 2009 08:34:32 -0500
Subject: [PATCH 0002/1421] x86: UV BAU messaging timeouts

This patch replaces a 'nop' uv_enable_timeouts() in the
UV TLB shootdown code. (somehow, long ago that function got
eviscerated)

If any cpu in the destination node does not get interrupted by the
message and post completion in a reasonable time the hardware
should respond to the sender with an error.  This function
enables such timeouts.

Tested on the UV hardware simulator.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1LpjXU-00007e-Qh@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_mmrs.h |  5 +++
 arch/x86/kernel/tlb_uv.c          | 56 +++++++++++++++++++++++++------
 2 files changed, 50 insertions(+), 11 deletions(-)

diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index db68ac8a5ac..2cae46c7c8a 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -17,6 +17,11 @@
 /* ========================================================================= */
 /*                           UVH_BAU_DATA_CONFIG                             */
 /* ========================================================================= */
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
+/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */
 #define UVH_BAU_DATA_CONFIG 0x61680UL
 #define UVH_BAU_DATA_CONFIG_32 0x0438
 
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index b833bc634d1..fced96e94e2 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -445,24 +445,58 @@ void uv_bau_message_interrupt(struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
+/*
+ * uv_enable_timeouts
+ *
+ * Each target blade (i.e. blades that have cpu's) needs to have
+ * shootdown message timeouts enabled.  The timeout does not cause
+ * an interrupt, but causes an error message to be returned to
+ * the sender.
+ */
 static void uv_enable_timeouts(void)
 {
-	int i;
 	int blade;
-	int last_blade;
+	int nblades;
 	int pnode;
-	int cur_cpu = 0;
-	unsigned long apicid;
+	unsigned long mmr_image;
+
+	nblades = uv_num_possible_blades();
 
-	last_blade = -1;
-	for_each_online_node(i) {
-		blade = uv_node_to_blade_id(i);
-		if (blade == last_blade)
+	for (blade = 0; blade < nblades; blade++) {
+		if (!uv_blade_nr_possible_cpus(blade))
 			continue;
-		last_blade = blade;
-		apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+
 		pnode = uv_blade_to_pnode(blade);
-		cur_cpu += uv_blade_nr_possible_cpus(i);
+		mmr_image =
+		    uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL);
+		/*
+		 * Set the timeout period and then lock it in, in three
+		 * steps; captures and locks in the period.
+		 *
+		 * To program the period, the SOFT_ACK_MODE must be off.
+		 */
+		mmr_image &= ~((unsigned long)1 <<
+			       UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+		uv_write_global_mmr64
+		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+		/*
+		 * Set the 4-bit period.
+		 */
+		mmr_image &= ~((unsigned long)0xf <<
+			UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+		mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD <<
+			     UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+		uv_write_global_mmr64
+		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+		/*
+		 * Subsequent reversals of the timebase bit (3) cause an
+		 * immediate timeout of one or all INTD resources as
+		 * indicated in bits 2:0 (7 causes all of them to timeout).
+		 */
+		mmr_image |= ((unsigned long)1 <<
+			      UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+		uv_write_global_mmr64
+		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 	}
 }
 
-- 
GitLab


From 1a544e659cbfce178395e9a090a47d1907d0cfa8 Mon Sep 17 00:00:00 2001
From: Russ Anderson <rja@sgi.com>
Date: Mon, 30 Mar 2009 17:52:40 -0500
Subject: [PATCH 0003/1421] x86, UV: system table in bios accessed after unmap

Use the copy of UV system table in kernel memory, not the one in
bios after unmapping.

Signed-off-by: Russ Anderson <rja@sgi.com>
LKML-Reference: <20090330225240.GA22776@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/bios_uv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
index f63882728d9..63a88e1f987 100644
--- a/arch/x86/kernel/bios_uv.c
+++ b/arch/x86/kernel/bios_uv.c
@@ -182,7 +182,8 @@ void uv_bios_init(void)
 	memcpy(&uv_systab, tab, sizeof(struct uv_systab));
 	iounmap(tab);
 
-	printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision);
+	printk(KERN_INFO "EFI UV System Table Revision %d\n",
+					uv_systab.revision);
 }
 #else	/* !CONFIG_EFI */
 
-- 
GitLab


From 6a891a24e4d0056c365a90ff2d71c38fd366b0d0 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 30 Mar 2009 09:01:11 -0500
Subject: [PATCH 0004/1421] x86, UV: Fix for nodes with memory and no cpus

Fix initialization of UV blade information for systems that have
nodes with memory but no cpus.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090330140111.GA18461@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1248318436e..de1a50af807 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -549,7 +549,8 @@ void __init uv_system_init(void)
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
 	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
 	int max_pnode = 0;
-	unsigned long mmr_base, present;
+	unsigned long mmr_base, present, paddr;
+	unsigned short pnode_mask;
 
 	map_low_mmrs();
 
@@ -592,6 +593,7 @@ void __init uv_system_init(void)
 		}
 	}
 
+	pnode_mask = (1 << n_val) - 1;
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
@@ -615,7 +617,7 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
 		uv_cpu_hub_info(cpu)->pnode = pnode;
-		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
@@ -631,6 +633,16 @@ void __init uv_system_init(void)
 			lcpu, blade);
 	}
 
+	/* Add blade/pnode info for nodes without cpus */
+	for_each_online_node(nid) {
+		if (uv_node_to_blade[nid] >= 0)
+			continue;
+		paddr = node_start_pfn(nid) << PAGE_SHIFT;
+		pnode = (paddr >> m_val) & pnode_mask;
+		blade = boot_pnode_to_blade(pnode);
+		uv_node_to_blade[nid] = blade;
+	}
+
 	map_gru_high(max_pnode);
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
-- 
GitLab


From 453ed90d1395a5281a8f1a0de5d8aabc66202e34 Mon Sep 17 00:00:00 2001
From: Latchesar Ionkov <lucho@ionkov.net>
Date: Sun, 5 Apr 2009 16:22:16 -0500
Subject: [PATCH 0005/1421] net/9p: set correct stat size when sending Twstat
 messages

The 9P2000 Twstat message requires the size of the stat structure to be
specified. Currently the 9p code writes zero instead of the actual size.
This behavior confuses some of the file servers that check if the size is
correct.

This patch adds a new function that calculcates the stat size and puts the
value in the appropriate place in the 9P message.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Reviewed-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/client.c | 34 +++++++++++++++++++++++++++++++---
 1 file changed, 31 insertions(+), 3 deletions(-)

diff --git a/net/9p/client.c b/net/9p/client.c
index 1eb580c38fb..93f442aaa11 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -1251,12 +1251,42 @@ error:
 }
 EXPORT_SYMBOL(p9_client_stat);
 
+static int p9_client_statsize(struct p9_wstat *wst, int optional)
+{
+	int ret;
+
+	/* size[2] type[2] dev[4] qid[13] */
+	/* mode[4] atime[4] mtime[4] length[8]*/
+	/* name[s] uid[s] gid[s] muid[s] */
+	ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+
+	if (wst->name)
+		ret += strlen(wst->name);
+	if (wst->uid)
+		ret += strlen(wst->uid);
+	if (wst->gid)
+		ret += strlen(wst->gid);
+	if (wst->muid)
+		ret += strlen(wst->muid);
+
+	if (optional) {
+		ret += 2+4+4+4;	/* extension[s] n_uid[4] n_gid[4] n_muid[4] */
+		if (wst->extension)
+			ret += strlen(wst->extension);
+	}
+
+	return ret;
+}
+
 int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
 {
 	int err;
 	struct p9_req_t *req;
 	struct p9_client *clnt;
 
+	err = 0;
+	clnt = fid->clnt;
+	wst->size = p9_client_statsize(wst, clnt->dotu);
 	P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid);
 	P9_DPRINTK(P9_DEBUG_9P,
 		"     sz=%x type=%x dev=%x qid=%x.%llx.%x\n"
@@ -1268,10 +1298,8 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
 		wst->atime, wst->mtime, (unsigned long long)wst->length,
 		wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
 		wst->n_uid, wst->n_gid, wst->n_muid);
-	err = 0;
-	clnt = fid->clnt;
 
-	req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst);
+	req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		goto error;
-- 
GitLab


From 742b11a7ec60faa25d76c95c268041ab215c25ad Mon Sep 17 00:00:00 2001
From: Latchesar Ionkov <lucho@ionkov.net>
Date: Sun, 5 Apr 2009 16:26:41 -0500
Subject: [PATCH 0006/1421] net/9p: return error when p9_client_stat fails

p9_client_stat function doesn't return correct value if it fails.
p9_client_stat should return ERR_PTR of the error value when it fails.
Instead, it always returns a value to the allocated p9_wstat struct even
when it is not populated correctly.

This patch makes p9_client_stat to handle failure correctly.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Reviewed-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/client.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/9p/client.c b/net/9p/client.c
index 93f442aaa11..781d89a952e 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -1244,10 +1244,14 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
 		ret->name, ret->uid, ret->gid, ret->muid, ret->extension,
 		ret->n_uid, ret->n_gid, ret->n_muid);
 
+	p9_free_req(clnt, req);
+	return ret;
+
 free_and_error:
 	p9_free_req(clnt, req);
 error:
-	return ret;
+	kfree(ret);
+	return ERR_PTR(err);
 }
 EXPORT_SYMBOL(p9_client_stat);
 
-- 
GitLab


From 1bab88b2310998de18b32529a27ea835d164254a Mon Sep 17 00:00:00 2001
From: Latchesar Ionkov <lucho@ionkov.net>
Date: Sun, 5 Apr 2009 16:28:59 -0500
Subject: [PATCH 0007/1421] net/9p: handle correctly interrupted 9P requests

Currently the 9p code crashes when a operation is interrupted, i.e. for
example when the user presses ^C while reading from a file.

This patch fixes the code that is responsible for interruption and flushing
of 9P operations.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
---
 include/net/9p/client.h |  1 -
 net/9p/client.c         | 74 +++++++++++------------------------------
 net/9p/trans_fd.c       | 14 +++++---
 net/9p/trans_rdma.c     |  1 +
 net/9p/trans_virtio.c   |  1 +
 5 files changed, 30 insertions(+), 61 deletions(-)

diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 4012e07162e..e26812274b7 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -98,7 +98,6 @@ enum p9_req_status_t {
 struct p9_req_t {
 	int status;
 	int t_err;
-	u16 flush_tag;
 	wait_queue_head_t *wq;
 	struct p9_fcall *tc;
 	struct p9_fcall *rc;
diff --git a/net/9p/client.c b/net/9p/client.c
index 781d89a952e..dd43a8289b0 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -203,7 +203,6 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag)
 	p9pdu_reset(req->tc);
 	p9pdu_reset(req->rc);
 
-	req->flush_tag = 0;
 	req->tc->tag = tag-1;
 	req->status = REQ_STATUS_ALLOC;
 
@@ -324,35 +323,9 @@ static void p9_free_req(struct p9_client *c, struct p9_req_t *r)
  */
 void p9_client_cb(struct p9_client *c, struct p9_req_t *req)
 {
-	struct p9_req_t *other_req;
-	unsigned long flags;
-
 	P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag);
-
-	if (req->status == REQ_STATUS_ERROR)
-		wake_up(req->wq);
-
-	if (req->flush_tag) { 			/* flush receive path */
-		P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag);
-		spin_lock_irqsave(&c->lock, flags);
-		other_req = p9_tag_lookup(c, req->flush_tag);
-		if (other_req->status != REQ_STATUS_FLSH) /* stale flush */
-			spin_unlock_irqrestore(&c->lock, flags);
-		else {
-			other_req->status = REQ_STATUS_FLSHD;
-			spin_unlock_irqrestore(&c->lock, flags);
-			wake_up(other_req->wq);
-		}
-		p9_free_req(c, req);
-	} else { 				/* normal receive path */
-		P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag);
-		spin_lock_irqsave(&c->lock, flags);
-		if (req->status != REQ_STATUS_FLSHD)
-			req->status = REQ_STATUS_RCVD;
-		spin_unlock_irqrestore(&c->lock, flags);
-		wake_up(req->wq);
-		P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
-	}
+	wake_up(req->wq);
+	P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
 }
 EXPORT_SYMBOL(p9_client_cb);
 
@@ -486,9 +459,15 @@ static int p9_client_flush(struct p9_client *c, struct p9_req_t *oldreq)
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
-	req->flush_tag = oldtag;
 
-	/* we don't free anything here because RPC isn't complete */
+	/* if we haven't received a response for oldreq,
+	   remove it from the list. */
+	spin_lock(&c->lock);
+	if (oldreq->status == REQ_STATUS_FLSH)
+		list_del(&oldreq->req_list);
+	spin_unlock(&c->lock);
+
+	p9_free_req(c, req);
 	return 0;
 }
 
@@ -509,7 +488,6 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...)
 	struct p9_req_t *req;
 	unsigned long flags;
 	int sigpending;
-	int flushed = 0;
 
 	P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type);
 
@@ -546,42 +524,28 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...)
 		goto reterr;
 	}
 
-	/* if it was a flush we just transmitted, return our tag */
-	if (type == P9_TFLUSH)
-		return req;
-again:
 	P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag);
 	err = wait_event_interruptible(*req->wq,
 						req->status >= REQ_STATUS_RCVD);
-	P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n",
-						req->wq, tag, err, flushed);
+	P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n",
+						req->wq, tag, err);
 
 	if (req->status == REQ_STATUS_ERROR) {
 		P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err);
 		err = req->t_err;
-	} else if (err == -ERESTARTSYS && flushed) {
-		P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n");
-		goto again;
-	} else if (req->status == REQ_STATUS_FLSHD) {
-		P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n");
-		err = -ERESTARTSYS;
 	}
 
-	if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) {
+	if ((err == -ERESTARTSYS) && (c->status == Connected)) {
 		P9_DPRINTK(P9_DEBUG_MUX, "flushing\n");
-		spin_lock_irqsave(&c->lock, flags);
-		if (req->status == REQ_STATUS_SENT)
-			req->status = REQ_STATUS_FLSH;
-		spin_unlock_irqrestore(&c->lock, flags);
 		sigpending = 1;
-		flushed = 1;
 		clear_thread_flag(TIF_SIGPENDING);
 
-		if (c->trans_mod->cancel(c, req)) {
-			err = p9_client_flush(c, req);
-			if (err == 0)
-				goto again;
-		}
+		if (c->trans_mod->cancel(c, req))
+			p9_client_flush(c, req);
+
+		/* if we received the response anyway, don't signal error */
+		if (req->status == REQ_STATUS_RCVD)
+			err = 0;
 	}
 
 	if (sigpending) {
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index c613ed08a5e..a2a1814c7a8 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -213,8 +213,8 @@ static void p9_conn_cancel(struct p9_conn *m, int err)
 	spin_unlock_irqrestore(&m->client->lock, flags);
 
 	list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
-		list_del(&req->req_list);
 		P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req);
+		list_del(&req->req_list);
 		p9_client_cb(m->client, req);
 	}
 }
@@ -336,7 +336,8 @@ static void p9_read_work(struct work_struct *work)
 			"mux %p pkt: size: %d bytes tag: %d\n", m, n, tag);
 
 		m->req = p9_tag_lookup(m->client, tag);
-		if (!m->req) {
+		if (!m->req || (m->req->status != REQ_STATUS_SENT &&
+					m->req->status != REQ_STATUS_FLSH)) {
 			P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n",
 								 tag);
 			err = -EIO;
@@ -361,10 +362,11 @@ static void p9_read_work(struct work_struct *work)
 	if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */
 		P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n");
 		spin_lock(&m->client->lock);
+		if (m->req->status != REQ_STATUS_ERROR)
+			m->req->status = REQ_STATUS_RCVD;
 		list_del(&m->req->req_list);
 		spin_unlock(&m->client->lock);
 		p9_client_cb(m->client, m->req);
-
 		m->rbuf = NULL;
 		m->rpos = 0;
 		m->rsize = 0;
@@ -454,6 +456,7 @@ static void p9_write_work(struct work_struct *work)
 		req = list_entry(m->unsent_req_list.next, struct p9_req_t,
 			       req_list);
 		req->status = REQ_STATUS_SENT;
+		P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req);
 		list_move_tail(&req->req_list, &m->req_list);
 
 		m->wbuf = req->tc->sdata;
@@ -683,12 +686,13 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req)
 	P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
 
 	spin_lock(&client->lock);
-	list_del(&req->req_list);
 
 	if (req->status == REQ_STATUS_UNSENT) {
+		list_del(&req->req_list);
 		req->status = REQ_STATUS_FLSHD;
 		ret = 0;
-	}
+	} else if (req->status == REQ_STATUS_SENT)
+		req->status = REQ_STATUS_FLSH;
 
 	spin_unlock(&client->lock);
 
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 7fa0eb20b2f..ac4990041eb 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -295,6 +295,7 @@ handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma,
 		goto err_out;
 
 	req->rc = c->rc;
+	req->status = REQ_STATUS_RCVD;
 	p9_client_cb(client, req);
 
 	return;
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 2d7781ec663..bb8579a141a 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -134,6 +134,7 @@ static void req_done(struct virtqueue *vq)
 		P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc);
 		P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag);
 		req = p9_tag_lookup(chan->client, rc->tag);
+		req->status = REQ_STATUS_RCVD;
 		p9_client_cb(chan->client, req);
 	}
 }
-- 
GitLab


From 7fd87b3f1a6955da0a21b4fd99f8939701055172 Mon Sep 17 00:00:00 2001
From: Francesco VIRLINZI <francesco.virlinzi@st.com>
Date: Mon, 6 Apr 2009 07:17:04 +0000
Subject: [PATCH 0008/1421] sh: intc: Added resume from hibernation support to
 the intc

It's required for all modules loaded in the previous runtime
session because not initilized duing the kernel start-up.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/sh/intc.c | 35 +++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 7fb9b5c4669..12d13d99b6f 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -44,6 +44,7 @@ struct intc_handle_int {
 struct intc_desc_int {
 	struct list_head list;
 	struct sys_device sysdev;
+	pm_message_t state;
 	unsigned long *reg;
 #ifdef CONFIG_SMP
 	unsigned long *smp;
@@ -786,18 +787,44 @@ static int intc_suspend(struct sys_device *dev, pm_message_t state)
 	/* get intc controller associated with this sysdev */
 	d = container_of(dev, struct intc_desc_int, sysdev);
 
-	/* enable wakeup irqs belonging to this intc controller */
-	for_each_irq_desc(irq, desc) {
-		if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
-			intc_enable(irq);
+	switch (state.event) {
+	case PM_EVENT_ON:
+		if (d->state.event != PM_EVENT_FREEZE)
+			break;
+		for_each_irq_desc(irq, desc) {
+			if (desc->chip != &d->chip)
+				continue;
+			if (desc->status & IRQ_DISABLED)
+				intc_disable(irq);
+			else
+				intc_enable(irq);
+		}
+		break;
+	case PM_EVENT_FREEZE:
+		/* nothing has to be done */
+		break;
+	case PM_EVENT_SUSPEND:
+		/* enable wakeup irqs belonging to this intc controller */
+		for_each_irq_desc(irq, desc) {
+			if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
+				intc_enable(irq);
+		}
+		break;
 	}
+	d->state = state;
 
 	return 0;
 }
 
+static int intc_resume(struct sys_device *dev)
+{
+	return intc_suspend(dev, PMSG_ON);
+}
+
 static struct sysdev_class intc_sysdev_class = {
 	.name = "intc",
 	.suspend = intc_suspend,
+	.resume = intc_resume,
 };
 
 /* register this intc as sysdev to allow suspend/resume */
-- 
GitLab


From 9bb019f4c25a426deab26c9d1c67c8914bb4424f Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Mon, 6 Apr 2009 11:37:15 +0000
Subject: [PATCH 0009/1421] sh: sh7785lcr: fix PCI address map for 32-bit mode

Fix the problem that cannot work PCI device on 32-bit mode because
influence of the commit 68b42d1b548be1840aff7122fdebeb804daf0fa3
("sh: sh7785lcr: Map whole PCI address space."). So this patch was
implement like a 29-bit mode, map whole physical address space of
DDR-SDRAM.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/ops-sh7785lcr.c | 5 +++++
 arch/sh/drivers/pci/pci-sh7780.h    | 2 ++
 2 files changed, 7 insertions(+)

diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
index e8b7446a7c2..fb0869f0bef 100644
--- a/arch/sh/drivers/pci/ops-sh7785lcr.c
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -48,8 +48,13 @@ EXPORT_SYMBOL(board_pci_channels);
 
 static struct sh4_pci_address_map sh7785_pci_map = {
 	.window0	= {
+#if defined(CONFIG_32BIT)
+		.base	= SH7780_32BIT_DDR_BASE_ADDR,
+		.size	= 0x40000000,
+#else
 		.base	= SH7780_CS0_BASE_ADDR,
 		.size	= 0x20000000,
+#endif
 	},
 
 	.flags	= SH4_PCIC_NO_RESET,
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 97b2c98f05c..93adc7119b7 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -104,6 +104,8 @@
 #define SH7780_CS5_BASE_ADDR	(SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
 #define SH7780_CS6_BASE_ADDR	(SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
 
+#define SH7780_32BIT_DDR_BASE_ADDR	0x40000000
+
 struct sh4_pci_address_map;
 
 /* arch/sh/drivers/pci/pci-sh7780.c */
-- 
GitLab


From 090fed50ca11e7fe36e69d8cd46069276a40134b Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 6 Apr 2009 09:00:16 -0700
Subject: [PATCH 0010/1421] sh: wire up sys_preadv/sys_pwritev() syscalls.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/unistd_32.h | 4 +++-
 arch/sh/include/asm/unistd_64.h | 4 +++-
 arch/sh/kernel/syscalls_32.S    | 2 ++
 arch/sh/kernel/syscalls_64.S    | 2 ++
 4 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index d52c000cf92..2efb819e2db 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -341,8 +341,10 @@
 #define __NR_dup3		330
 #define __NR_pipe2		331
 #define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
-#define NR_syscalls 333
+#define NR_syscalls 335
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 7c54e91753c..6eb9d2934c0 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -381,10 +381,12 @@
 #define __NR_dup3		358
 #define __NR_pipe2		359
 #define __NR_inotify_init1	360
+#define __NR_preadv		361
+#define __NR_pwritev		362
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 361
+#define NR_syscalls 363
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index e67c1733e1b..05202edd8e2 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -349,3 +349,5 @@ ENTRY(sys_call_table)
 	.long sys_dup3			/* 330 */
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_writev
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 557cb91f5ca..a083609f928 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -387,3 +387,5 @@ sys_call_table:
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1		/* 360 */
+	.long sys_preadv
+	.long sys_pwritev
-- 
GitLab


From a6cb767e24b1dbedfcfa8077eab0aa2eab224038 Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:39:27 +0200
Subject: [PATCH 0011/1421] xfs: validate log feature fields correctly

If the large log sector size feature bit is set in the
superblock by accident (say disk corruption), the then
fields that are now considered valid are not checked on
production kernels. The checks are present as ASSERT
statements so cause a panic on a debug kernel.

Change this so that the fields are validity checked if
the feature bit is set and abort the log mount if the
fields do not contain valid values.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 41 ++++++++++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 11 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index f76c6d7cea2..8016d304074 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -562,9 +562,8 @@ xfs_log_mount(
 	}
 
 	mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks);
-	if (!mp->m_log) {
-		cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!");
-		error = ENOMEM;
+	if (IS_ERR(mp->m_log)) {
+		error = -PTR_ERR(mp->m_log);
 		goto out;
 	}
 
@@ -1180,10 +1179,13 @@ xlog_alloc_log(xfs_mount_t	*mp,
 	xfs_buf_t		*bp;
 	int			i;
 	int			iclogsize;
+	int			error = ENOMEM;
 
 	log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL);
-	if (!log)
-		return NULL;
+	if (!log) {
+		xlog_warn("XFS: Log allocation failed: No memory!");
+		goto out;
+	}
 
 	log->l_mp	   = mp;
 	log->l_targ	   = log_target;
@@ -1201,19 +1203,35 @@ xlog_alloc_log(xfs_mount_t	*mp,
 	log->l_grant_reserve_cycle = 1;
 	log->l_grant_write_cycle = 1;
 
+	error = EFSCORRUPTED;
 	if (xfs_sb_version_hassector(&mp->m_sb)) {
 		log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
-		ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
+		if (log->l_sectbb_log < 0 ||
+		    log->l_sectbb_log > mp->m_sectbb_log) {
+			xlog_warn("XFS: Log sector size (0x%x) out of range.",
+						log->l_sectbb_log);
+			goto out_free_log;
+		}
+
 		/* for larger sector sizes, must have v2 or external log */
-		ASSERT(log->l_sectbb_log == 0 ||
-			log->l_logBBstart == 0 ||
-			xfs_sb_version_haslogv2(&mp->m_sb));
-		ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
+		if (log->l_sectbb_log != 0 &&
+		    (log->l_logBBstart != 0 &&
+		     !xfs_sb_version_haslogv2(&mp->m_sb))) {
+			xlog_warn("XFS: log sector size (0x%x) invalid "
+				  "for configuration.", log->l_sectbb_log);
+			goto out_free_log;
+		}
+		if (mp->m_sb.sb_logsectlog < BBSHIFT) {
+			xlog_warn("XFS: Log sector log (0x%x) too small.",
+						mp->m_sb.sb_logsectlog);
+			goto out_free_log;
+		}
 	}
 	log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
 
 	xlog_get_iclog_buffer_size(mp, log);
 
+	error = ENOMEM;
 	bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp);
 	if (!bp)
 		goto out_free_log;
@@ -1313,7 +1331,8 @@ out_free_iclog:
 	xfs_buf_free(log->l_xbuf);
 out_free_log:
 	kmem_free(log);
-	return NULL;
+out:
+	return ERR_PTR(-error);
 }	/* xlog_alloc_log */
 
 
-- 
GitLab


From 705db3fd4660174a27418bbcb874d209a76044eb Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:40:17 +0200
Subject: [PATCH 0012/1421] xfs: fix double free of inode

If we fail to initialise the VFS inode in inode_init_always(),
it will call ->delete_inode internally resulting in the inode being
freed. Hence we need to delay the call to inode_init_always()
until after the XFS inode is sufficient set up to handle a
call to ->delete_inode, and then if that fails do not touch
the inode again at all as it has been freed.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_iget.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 478e587087f..89b81eedce6 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -69,15 +69,6 @@ xfs_inode_alloc(
 	ASSERT(!spin_is_locked(&ip->i_flags_lock));
 	ASSERT(completion_done(&ip->i_flush));
 
-	/*
-	 * initialise the VFS inode here to get failures
-	 * out of the way early.
-	 */
-	if (!inode_init_always(mp->m_super, VFS_I(ip))) {
-		kmem_zone_free(xfs_inode_zone, ip);
-		return NULL;
-	}
-
 	/* initialise the xfs inode */
 	ip->i_ino = ino;
 	ip->i_mount = mp;
@@ -113,6 +104,20 @@ xfs_inode_alloc(
 #ifdef XFS_DIR2_TRACE
 	ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
 #endif
+	/*
+	* Now initialise the VFS inode. We do this after the xfs_inode
+	* initialisation as internal failures will result in ->destroy_inode
+	* being called and that will pass down through the reclaim path and
+	* free the XFS inode. This path requires the XFS inode to already be
+	* initialised. Hence if this call fails, the xfs_inode has already
+	* been freed and we should not reference it at all in the error
+	* handling.
+	*/
+	if (!inode_init_always(mp->m_super, VFS_I(ip)))
+		return NULL;
+
+	/* prevent anyone from using this yet */
+	VFS_I(ip)->i_state = I_NEW|I_LOCK;
 
 	return ip;
 }
-- 
GitLab


From c626d174cfe38e7f0545d074c299527892cd8c45 Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:42:11 +0200
Subject: [PATCH 0013/1421] xfs: prevent unwritten extent conversion from
 blocking I/O completion

Unwritten extent conversion can recurse back into the filesystem due
to memory allocation. Memory reclaim requires I/O completions to be
processed to allow the callers to make progress. If the I/O
completion workqueue thread is doing the recursion, then we have a
deadlock situation.

Move unwritten extent completion into it's own workqueue so it
doesn't block I/O completions for normal delayed allocation or
overwrite data.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/linux-2.6/xfs_aops.c | 38 ++++++++++++++++++++-----------------
 fs/xfs/linux-2.6/xfs_aops.h |  1 +
 fs/xfs/linux-2.6/xfs_buf.c  |  9 +++++++++
 3 files changed, 31 insertions(+), 17 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c13f67300fe..7ec89fc05b2 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -152,23 +152,6 @@ xfs_find_bdev_for_inode(
 		return mp->m_ddev_targp->bt_bdev;
 }
 
-/*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
- */
-STATIC void
-xfs_finish_ioend(
-	xfs_ioend_t	*ioend,
-	int		wait)
-{
-	if (atomic_dec_and_test(&ioend->io_remaining)) {
-		queue_work(xfsdatad_workqueue, &ioend->io_work);
-		if (wait)
-			flush_workqueue(xfsdatad_workqueue);
-	}
-}
-
 /*
  * We're now finished for good with this ioend structure.
  * Update the page state via the associated buffer_heads,
@@ -309,6 +292,27 @@ xfs_end_bio_read(
 	xfs_destroy_ioend(ioend);
 }
 
+/*
+ * Schedule IO completion handling on a xfsdatad if this was
+ * the final hold on this ioend. If we are asked to wait,
+ * flush the workqueue.
+ */
+STATIC void
+xfs_finish_ioend(
+	xfs_ioend_t	*ioend,
+	int		wait)
+{
+	if (atomic_dec_and_test(&ioend->io_remaining)) {
+		struct workqueue_struct *wq = xfsdatad_workqueue;
+		if (ioend->io_work.func == xfs_end_bio_unwritten)
+			wq = xfsconvertd_workqueue;
+
+		queue_work(wq, &ioend->io_work);
+		if (wait)
+			flush_workqueue(wq);
+	}
+}
+
 /*
  * Allocate and initialise an IO completion structure.
  * We need to track unwritten extent write completion here initially.
diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 1dd52884975..221b3e66cee 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -19,6 +19,7 @@
 #define __XFS_AOPS_H__
 
 extern struct workqueue_struct *xfsdatad_workqueue;
+extern struct workqueue_struct *xfsconvertd_workqueue;
 extern mempool_t *xfs_ioend_pool;
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index aa1016bb913..e28800a9f2b 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -51,6 +51,7 @@ static struct shrinker xfs_buf_shake = {
 
 static struct workqueue_struct *xfslogd_workqueue;
 struct workqueue_struct *xfsdatad_workqueue;
+struct workqueue_struct *xfsconvertd_workqueue;
 
 #ifdef XFS_BUF_TRACE
 void
@@ -1775,6 +1776,7 @@ xfs_flush_buftarg(
 	xfs_buf_t	*bp, *n;
 	int		pincount = 0;
 
+	xfs_buf_runall_queues(xfsconvertd_workqueue);
 	xfs_buf_runall_queues(xfsdatad_workqueue);
 	xfs_buf_runall_queues(xfslogd_workqueue);
 
@@ -1831,9 +1833,15 @@ xfs_buf_init(void)
 	if (!xfsdatad_workqueue)
 		goto out_destroy_xfslogd_workqueue;
 
+	xfsconvertd_workqueue = create_workqueue("xfsconvertd");
+	if (!xfsconvertd_workqueue)
+		goto out_destroy_xfsdatad_workqueue;
+
 	register_shrinker(&xfs_buf_shake);
 	return 0;
 
+ out_destroy_xfsdatad_workqueue:
+	destroy_workqueue(xfsdatad_workqueue);
  out_destroy_xfslogd_workqueue:
 	destroy_workqueue(xfslogd_workqueue);
  out_free_buf_zone:
@@ -1849,6 +1857,7 @@ void
 xfs_buf_terminate(void)
 {
 	unregister_shrinker(&xfs_buf_shake);
+	destroy_workqueue(xfsconvertd_workqueue);
 	destroy_workqueue(xfsdatad_workqueue);
 	destroy_workqueue(xfslogd_workqueue);
 	kmem_zone_destroy(xfs_buf_zone);
-- 
GitLab


From 9d7fef74b23fe57803c5f71fab11630d9ec2cb4b Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:42:59 +0200
Subject: [PATCH 0014/1421] xfs: inform the xfsaild of the push target before
 sleeping

When trying to reserve log space, we find the amount of space
we need, then go to sleep waiting for space. When we are
woken, we try to push the tail of the log forward to make
sure we have space available.

Unfortunately, this means that if there is not space available, and
everyone who needs space goes to sleep there is no-one left to push
the tail of the log to make space available. Once we have a thread
waiting for space to become available, the others queue up behind
it in a FIFO, and none of them push the tail of the log.

This can result in everyone going to sleep in xlog_grant_log_space()
if the first sleeper races with the last I/O that moves the tail
of the log forward. With no further I/O tomove the tail of the log,
there is nothing to wake the sleepers and hence all transactions
just stop.

Fix this by making sure the xfsaild will create enough space for the
transaction that is about to sleep by moving the push target far
enough forwards to ensure that that the curent proceeees will have
enough space available when it is woken. That is, we push the
AIL before we go to sleep.

Because we've inserted the log ticket into the queue before we've
pushed and gone to sleep, subsequent transactions will wait behind
this one. Hence we are guaranteed to have space available when we
are woken.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log.c | 37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 8016d304074..3750f04ede0 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -2560,18 +2560,19 @@ redo:
 			xlog_ins_ticketq(&log->l_reserve_headq, tic);
 		xlog_trace_loggrant(log, tic,
 				    "xlog_grant_log_space: sleep 2");
+		spin_unlock(&log->l_grant_lock);
+		xlog_grant_push_ail(log->l_mp, need_bytes);
+		spin_lock(&log->l_grant_lock);
+
 		XFS_STATS_INC(xs_sleep_logspace);
 		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
-		if (XLOG_FORCED_SHUTDOWN(log)) {
-			spin_lock(&log->l_grant_lock);
+		spin_lock(&log->l_grant_lock);
+		if (XLOG_FORCED_SHUTDOWN(log))
 			goto error_return;
-		}
 
 		xlog_trace_loggrant(log, tic,
 				    "xlog_grant_log_space: wake 2");
-		xlog_grant_push_ail(log->l_mp, need_bytes);
-		spin_lock(&log->l_grant_lock);
 		goto redo;
 	} else if (tic->t_flags & XLOG_TIC_IN_Q)
 		xlog_del_ticketq(&log->l_reserve_headq, tic);
@@ -2650,7 +2651,7 @@ xlog_regrant_write_log_space(xlog_t	   *log,
 	 * for more free space, otherwise try to get some space for
 	 * this transaction.
 	 */
-
+	need_bytes = tic->t_unit_res;
 	if ((ntic = log->l_write_headq)) {
 		free_bytes = xlog_space_left(log, log->l_grant_write_cycle,
 					     log->l_grant_write_bytes);
@@ -2670,26 +2671,25 @@ xlog_regrant_write_log_space(xlog_t	   *log,
 
 			xlog_trace_loggrant(log, tic,
 				    "xlog_regrant_write_log_space: sleep 1");
+			spin_unlock(&log->l_grant_lock);
+			xlog_grant_push_ail(log->l_mp, need_bytes);
+			spin_lock(&log->l_grant_lock);
+
 			XFS_STATS_INC(xs_sleep_logspace);
 			sv_wait(&tic->t_wait, PINOD|PLTWAIT,
 				&log->l_grant_lock, s);
 
 			/* If we're shutting down, this tic is already
 			 * off the queue */
-			if (XLOG_FORCED_SHUTDOWN(log)) {
-				spin_lock(&log->l_grant_lock);
+			spin_lock(&log->l_grant_lock);
+			if (XLOG_FORCED_SHUTDOWN(log))
 				goto error_return;
-			}
 
 			xlog_trace_loggrant(log, tic,
 				    "xlog_regrant_write_log_space: wake 1");
-			xlog_grant_push_ail(log->l_mp, tic->t_unit_res);
-			spin_lock(&log->l_grant_lock);
 		}
 	}
 
-	need_bytes = tic->t_unit_res;
-
 redo:
 	if (XLOG_FORCED_SHUTDOWN(log))
 		goto error_return;
@@ -2699,19 +2699,20 @@ redo:
 	if (free_bytes < need_bytes) {
 		if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
 			xlog_ins_ticketq(&log->l_write_headq, tic);
+		spin_unlock(&log->l_grant_lock);
+		xlog_grant_push_ail(log->l_mp, need_bytes);
+		spin_lock(&log->l_grant_lock);
+
 		XFS_STATS_INC(xs_sleep_logspace);
 		sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
 
 		/* If we're shutting down, this tic is already off the queue */
-		if (XLOG_FORCED_SHUTDOWN(log)) {
-			spin_lock(&log->l_grant_lock);
+		spin_lock(&log->l_grant_lock);
+		if (XLOG_FORCED_SHUTDOWN(log))
 			goto error_return;
-		}
 
 		xlog_trace_loggrant(log, tic,
 				    "xlog_regrant_write_log_space: wake 2");
-		xlog_grant_push_ail(log->l_mp, need_bytes);
-		spin_lock(&log->l_grant_lock);
 		goto redo;
 	} else if (tic->t_flags & XLOG_TIC_IN_Q)
 		xlog_del_ticketq(&log->l_write_headq, tic);
-- 
GitLab


From a8d770d987ee20b59fba6c37d7f0f2a351913c4b Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:44:54 +0200
Subject: [PATCH 0015/1421] xfs: use xfs_sync_inodes() for device flushing

Currently xfs_device_flush calls sync_blockdev() which is
a no-op for XFS as all it's metadata is held in a different
address to the one sync_blockdev() works on.

Call xfs_sync_inodes() instead to flush all the delayed
allocation blocks out. To do this as efficiently as possible,
do it via two passes - one to do an async flush of all the
dirty blocks and a second to wait for all the IO to complete.
This requires some modification to the xfs-sync_inodes_ag()
flush code to do efficiently.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/linux-2.6/xfs_fs_subr.c | 14 +++++------
 fs/xfs/linux-2.6/xfs_sync.c    | 43 ++++++++++++++++++++--------------
 fs/xfs/linux-2.6/xfs_sync.h    |  7 +++---
 fs/xfs/xfs_iomap.c             |  2 +-
 fs/xfs/xfs_mount.h             |  2 +-
 5 files changed, 38 insertions(+), 30 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index 5aeb7777696..08be36d7326 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -74,14 +74,14 @@ xfs_flush_pages(
 
 	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 		xfs_iflags_clear(ip, XFS_ITRUNCATED);
-		ret = filemap_fdatawrite(mapping);
-		if (flags & XFS_B_ASYNC)
-			return -ret;
-		ret2 = filemap_fdatawait(mapping);
-		if (!ret)
-			ret = ret2;
+		ret = -filemap_fdatawrite(mapping);
 	}
-	return -ret;
+	if (flags & XFS_B_ASYNC)
+		return ret;
+	ret2 = xfs_wait_on_pages(ip, first, last);
+	if (!ret)
+		ret = ret2;
+	return ret;
 }
 
 int
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index a608e72fa40..88caafc8ef1 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -62,12 +62,6 @@ xfs_sync_inodes_ag(
 	uint32_t	first_index = 0;
 	int		error = 0;
 	int		last_error = 0;
-	int		fflag = XFS_B_ASYNC;
-
-	if (flags & SYNC_DELWRI)
-		fflag = XFS_B_DELWRI;
-	if (flags & SYNC_WAIT)
-		fflag = 0;		/* synchronous overrides all */
 
 	do {
 		struct inode	*inode;
@@ -128,11 +122,23 @@ xfs_sync_inodes_ag(
 		 * If we have to flush data or wait for I/O completion
 		 * we need to hold the iolock.
 		 */
-		if ((flags & SYNC_DELWRI) && VN_DIRTY(inode)) {
-			xfs_ilock(ip, XFS_IOLOCK_SHARED);
-			lock_flags |= XFS_IOLOCK_SHARED;
-			error = xfs_flush_pages(ip, 0, -1, fflag, FI_NONE);
-			if (flags & SYNC_IOWAIT)
+		if (flags & SYNC_DELWRI) {
+			if (VN_DIRTY(inode)) {
+				if (flags & SYNC_TRYLOCK) {
+					if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
+						lock_flags |= XFS_IOLOCK_SHARED;
+				} else {
+					xfs_ilock(ip, XFS_IOLOCK_SHARED);
+					lock_flags |= XFS_IOLOCK_SHARED;
+				}
+				if (lock_flags & XFS_IOLOCK_SHARED) {
+					error = xfs_flush_pages(ip, 0, -1,
+							(flags & SYNC_WAIT) ? 0
+								: XFS_B_ASYNC,
+							FI_NONE);
+				}
+			}
+			if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
 				xfs_ioend_wait(ip);
 		}
 		xfs_ilock(ip, XFS_ILOCK_SHARED);
@@ -400,9 +406,9 @@ xfs_syncd_queue_work(
 	void		*data,
 	void		(*syncer)(struct xfs_mount *, void *))
 {
-	struct bhv_vfs_sync_work *work;
+	struct xfs_sync_work *work;
 
-	work = kmem_alloc(sizeof(struct bhv_vfs_sync_work), KM_SLEEP);
+	work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP);
 	INIT_LIST_HEAD(&work->w_list);
 	work->w_syncer = syncer;
 	work->w_data = data;
@@ -445,23 +451,24 @@ xfs_flush_inode(
  * (IOW, "If at first you don't succeed, use a Bigger Hammer").
  */
 STATIC void
-xfs_flush_device_work(
+xfs_flush_inodes_work(
 	struct xfs_mount *mp,
 	void		*arg)
 {
 	struct inode	*inode = arg;
-	sync_blockdev(mp->m_super->s_bdev);
+	xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
+	xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
 	iput(inode);
 }
 
 void
-xfs_flush_device(
+xfs_flush_inodes(
 	xfs_inode_t	*ip)
 {
 	struct inode	*inode = VFS_I(ip);
 
 	igrab(inode);
-	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
+	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work);
 	delay(msecs_to_jiffies(500));
 	xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC);
 }
@@ -497,7 +504,7 @@ xfssyncd(
 {
 	struct xfs_mount	*mp = arg;
 	long			timeleft;
-	bhv_vfs_sync_work_t	*work, *n;
+	xfs_sync_work_t		*work, *n;
 	LIST_HEAD		(tmp);
 
 	set_freezable();
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 04f058c848a..ec95e264805 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -21,18 +21,19 @@
 struct xfs_mount;
 struct xfs_perag;
 
-typedef struct bhv_vfs_sync_work {
+typedef struct xfs_sync_work {
 	struct list_head	w_list;
 	struct xfs_mount	*w_mount;
 	void			*w_data;	/* syncer routine argument */
 	void			(*w_syncer)(struct xfs_mount *, void *);
-} bhv_vfs_sync_work_t;
+} xfs_sync_work_t;
 
 #define SYNC_ATTR		0x0001	/* sync attributes */
 #define SYNC_DELWRI		0x0002	/* look at delayed writes */
 #define SYNC_WAIT		0x0004	/* wait for i/o to complete */
 #define SYNC_BDFLUSH		0x0008	/* BDFLUSH is calling -- don't block */
 #define SYNC_IOWAIT		0x0010  /* wait for all I/O to complete */
+#define SYNC_TRYLOCK		0x0020  /* only try to lock inodes */
 
 int xfs_syncd_init(struct xfs_mount *mp);
 void xfs_syncd_stop(struct xfs_mount *mp);
@@ -44,7 +45,7 @@ int xfs_quiesce_data(struct xfs_mount *mp);
 void xfs_quiesce_attr(struct xfs_mount *mp);
 
 void xfs_flush_inode(struct xfs_inode *ip);
-void xfs_flush_device(struct xfs_inode *ip);
+void xfs_flush_inodes(struct xfs_inode *ip);
 
 int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
 int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 08ce72316bf..8b97d82d7a8 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -361,7 +361,7 @@ xfs_flush_space(
 		return 0;
 	case 2:
 		xfs_iunlock(ip, XFS_ILOCK_EXCL);
-		xfs_flush_device(ip);
+		xfs_flush_inodes(ip);
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
 		*fsynced = 3;
 		return 0;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 7af44adffc8..d6a64392f98 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -313,7 +313,7 @@ typedef struct xfs_mount {
 #endif
 	struct xfs_mru_cache	*m_filestream;  /* per-mount filestream data */
 	struct task_struct	*m_sync_task;	/* generalised sync thread */
-	bhv_vfs_sync_work_t	m_sync_work;	/* work item for VFS_SYNC */
+	xfs_sync_work_t		m_sync_work;	/* work item for VFS_SYNC */
 	struct list_head	m_sync_list;	/* sync thread work item list */
 	spinlock_t		m_sync_lock;	/* work item list lock */
 	int			m_sync_seq;	/* sync thread generation no. */
-- 
GitLab


From 5825294edd3364cbba6514f70d88debec4f6cec7 Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:45:44 +0200
Subject: [PATCH 0016/1421] xfs: make inode flush at ENOSPC synchronous

When we are writing to a single file and hit ENOSPC, we trigger a background
flush of the inode and try again.  Because we hold page locks and the iolock,
the flush won't proceed until after we release these locks. This occurs once
we've given up and ENOSPC has been reported. Hence if this one is the only
dirty inode in the system, we'll get an ENOSPC prematurely.

To fix this, remove the async flush from the allocation routines and move
it to the top of the write path where we can do a synchronous flush
and retry the write again. Only retry once as a second ENOSPC indicates
that we really are ENOSPC.

This avoids a page cache deadlock when trying to do this flush synchronously
in the allocation layer that was identified by Mikulas Patocka.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/linux-2.6/xfs_lrw.c  | 18 +++++++++++++++++-
 fs/xfs/linux-2.6/xfs_sync.c | 25 -------------------------
 fs/xfs/linux-2.6/xfs_sync.h |  1 -
 fs/xfs/xfs_iomap.c          |  2 +-
 4 files changed, 18 insertions(+), 28 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 7e90daa0d1d..9142192ccbe 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -751,10 +751,26 @@ start:
 			goto relock;
 		}
 	} else {
+		int enospc = 0;
+		ssize_t ret2 = 0;
+
+write_retry:
 		xfs_rw_enter_trace(XFS_WRITE_ENTER, xip, (void *)iovp, segs,
 				*offset, ioflags);
-		ret = generic_file_buffered_write(iocb, iovp, segs,
+		ret2 = generic_file_buffered_write(iocb, iovp, segs,
 				pos, offset, count, ret);
+		/*
+		 * if we just got an ENOSPC, flush the inode now we
+		 * aren't holding any page locks and retry *once*
+		 */
+		if (ret2 == -ENOSPC && !enospc) {
+			error = xfs_flush_pages(xip, 0, -1, 0, FI_NONE);
+			if (error)
+				goto out_unlock_internal;
+			enospc = 1;
+			goto write_retry;
+		}
+		ret = ret2;
 	}
 
 	current->backing_dev_info = NULL;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 88caafc8ef1..73cf8dc1973 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -426,31 +426,6 @@ xfs_syncd_queue_work(
  * heads, looking about for more room...
  */
 STATIC void
-xfs_flush_inode_work(
-	struct xfs_mount *mp,
-	void		*arg)
-{
-	struct inode	*inode = arg;
-	filemap_flush(inode->i_mapping);
-	iput(inode);
-}
-
-void
-xfs_flush_inode(
-	xfs_inode_t	*ip)
-{
-	struct inode	*inode = VFS_I(ip);
-
-	igrab(inode);
-	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
-	delay(msecs_to_jiffies(500));
-}
-
-/*
- * This is the "bigger hammer" version of xfs_flush_inode_work...
- * (IOW, "If at first you don't succeed, use a Bigger Hammer").
- */
-STATIC void
 xfs_flush_inodes_work(
 	struct xfs_mount *mp,
 	void		*arg)
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index ec95e264805..6e83a35626e 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -44,7 +44,6 @@ int xfs_sync_fsdata(struct xfs_mount *mp, int flags);
 int xfs_quiesce_data(struct xfs_mount *mp);
 void xfs_quiesce_attr(struct xfs_mount *mp);
 
-void xfs_flush_inode(struct xfs_inode *ip);
 void xfs_flush_inodes(struct xfs_inode *ip);
 
 int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 8b97d82d7a8..7b8b1707103 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -347,7 +347,7 @@ xfs_flush_space(
 	case 0:
 		if (ip->i_delayed_blks) {
 			xfs_iunlock(ip, XFS_ILOCK_EXCL);
-			xfs_flush_inode(ip);
+			delay(1);
 			xfs_ilock(ip, XFS_ILOCK_EXCL);
 			*fsynced = 1;
 		} else {
-- 
GitLab


From e43afd72d2455defd63a3f94f22fa09b586e58ed Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:47:27 +0200
Subject: [PATCH 0017/1421] xfs: block callers of xfs_flush_inodes() correctly

xfs_flush_inodes() currently uses a magic timeout to wait for
some inodes to be flushed before returning. This isn't
really reliable but used to be the best that could be done
due to deadlock potential of waiting for the entire flush.

Now the inode flush is safe to execute while we hold page
and inode locks, we can wait for all the inodes to flush
synchronously. Convert the wait mechanism to a completion
to do this efficiently. This should remove all remaining
spurious ENOSPC errors from the delayed allocation reservation
path.

This is extracted almost line for line from a larger patch
from Mikulas Patocka.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/linux-2.6/xfs_sync.c | 12 +++++++++---
 fs/xfs/linux-2.6/xfs_sync.h |  1 +
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 73cf8dc1973..f7ba76633c2 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -404,7 +404,8 @@ STATIC void
 xfs_syncd_queue_work(
 	struct xfs_mount *mp,
 	void		*data,
-	void		(*syncer)(struct xfs_mount *, void *))
+	void		(*syncer)(struct xfs_mount *, void *),
+	struct completion *completion)
 {
 	struct xfs_sync_work *work;
 
@@ -413,6 +414,7 @@ xfs_syncd_queue_work(
 	work->w_syncer = syncer;
 	work->w_data = data;
 	work->w_mount = mp;
+	work->w_completion = completion;
 	spin_lock(&mp->m_sync_lock);
 	list_add_tail(&work->w_list, &mp->m_sync_list);
 	spin_unlock(&mp->m_sync_lock);
@@ -441,10 +443,11 @@ xfs_flush_inodes(
 	xfs_inode_t	*ip)
 {
 	struct inode	*inode = VFS_I(ip);
+	DECLARE_COMPLETION_ONSTACK(completion);
 
 	igrab(inode);
-	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work);
-	delay(msecs_to_jiffies(500));
+	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion);
+	wait_for_completion(&completion);
 	xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC);
 }
 
@@ -514,6 +517,8 @@ xfssyncd(
 			list_del(&work->w_list);
 			if (work == &mp->m_sync_work)
 				continue;
+			if (work->w_completion)
+				complete(work->w_completion);
 			kmem_free(work);
 		}
 	}
@@ -527,6 +532,7 @@ xfs_syncd_init(
 {
 	mp->m_sync_work.w_syncer = xfs_sync_worker;
 	mp->m_sync_work.w_mount = mp;
+	mp->m_sync_work.w_completion = NULL;
 	mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd");
 	if (IS_ERR(mp->m_sync_task))
 		return -PTR_ERR(mp->m_sync_task);
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 6e83a35626e..308d5bf6dfb 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -26,6 +26,7 @@ typedef struct xfs_sync_work {
 	struct xfs_mount	*w_mount;
 	void			*w_data;	/* syncer routine argument */
 	void			(*w_syncer)(struct xfs_mount *, void *);
+	struct completion	*w_completion;
 } xfs_sync_work_t;
 
 #define SYNC_ATTR		0x0001	/* sync attributes */
-- 
GitLab


From 153fec43ce5264dfe9f3530b281a2e940b25a0a8 Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:48:30 +0200
Subject: [PATCH 0018/1421] xfs: flush delayed allcoation blocks on ENOSPC in
 create

If we are creating lots of small files, we can fail to get
a reservation for inode create earlier than we should due to
EOF preallocation done during delayed allocation reservation.
Hence on the first reservation ENOSPC failure flush all the
delayed allocation blocks out of the system and retry.

This fixes the last commonly triggered spurious ENOSPC issue
that has been reported.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_vnodeops.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 7394c7af5de..19cf90a9c76 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -1457,6 +1457,13 @@ xfs_create(
 	error = xfs_trans_reserve(tp, resblks, log_res, 0,
 			XFS_TRANS_PERM_LOG_RES, log_count);
 	if (error == ENOSPC) {
+		/* flush outstanding delalloc blocks and retry */
+		xfs_flush_inodes(dp);
+		error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0,
+			XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT);
+	}
+	if (error == ENOSPC) {
+		/* No space at all so try a "no-allocation" reservation */
 		resblks = 0;
 		error = xfs_trans_reserve(tp, 0, log_res, 0,
 				XFS_TRANS_PERM_LOG_RES, log_count);
-- 
GitLab


From 8de2bf937a6bea8f0f775fd5399ba20c1a0c3d77 Mon Sep 17 00:00:00 2001
From: Dave Chinner <david@fromorbit.com>
Date: Mon, 6 Apr 2009 18:49:12 +0200
Subject: [PATCH 0019/1421] xfs: remove xfs_flush_space

The only thing we need to do now when we get an ENOSPC condition during delayed
allocation reservation is flush all the other inodes with delalloc blocks on
them and retry without EOF preallocation. Remove the unneeded mess that is
xfs_flush_space() and just call xfs_flush_inodes() directly from
xfs_iomap_write_delay().

Also, change the location of the retry label to avoid trying to do EOF
preallocation because we don't want to do that at ENOSPC. This enables us to
remove the BMAPI_SYNC flag as it is no longer used.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_iomap.c | 61 ++++++++++++----------------------------------
 fs/xfs/xfs_iomap.h |  3 +--
 2 files changed, 16 insertions(+), 48 deletions(-)

diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 7b8b1707103..5aaa2d7ec15 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -337,38 +337,6 @@ xfs_iomap_eof_align_last_fsb(
 	return 0;
 }
 
-STATIC int
-xfs_flush_space(
-	xfs_inode_t	*ip,
-	int		*fsynced,
-	int		*ioflags)
-{
-	switch (*fsynced) {
-	case 0:
-		if (ip->i_delayed_blks) {
-			xfs_iunlock(ip, XFS_ILOCK_EXCL);
-			delay(1);
-			xfs_ilock(ip, XFS_ILOCK_EXCL);
-			*fsynced = 1;
-		} else {
-			*ioflags |= BMAPI_SYNC;
-			*fsynced = 2;
-		}
-		return 0;
-	case 1:
-		*fsynced = 2;
-		*ioflags |= BMAPI_SYNC;
-		return 0;
-	case 2:
-		xfs_iunlock(ip, XFS_ILOCK_EXCL);
-		xfs_flush_inodes(ip);
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		*fsynced = 3;
-		return 0;
-	}
-	return 1;
-}
-
 STATIC int
 xfs_cmn_err_fsblock_zero(
 	xfs_inode_t	*ip,
@@ -538,15 +506,9 @@ error_out:
 }
 
 /*
- * If the caller is doing a write at the end of the file,
- * then extend the allocation out to the file system's write
- * iosize.  We clean up any extra space left over when the
- * file is closed in xfs_inactive().
- *
- * For sync writes, we are flushing delayed allocate space to
- * try to make additional space available for allocation near
- * the filesystem full boundary - preallocation hurts in that
- * situation, of course.
+ * If the caller is doing a write at the end of the file, then extend the
+ * allocation out to the file system's write iosize.  We clean up any extra
+ * space left over when the file is closed in xfs_inactive().
  */
 STATIC int
 xfs_iomap_eof_want_preallocate(
@@ -565,7 +527,7 @@ xfs_iomap_eof_want_preallocate(
 	int		n, error, imaps;
 
 	*prealloc = 0;
-	if ((ioflag & BMAPI_SYNC) || (offset + count) <= ip->i_size)
+	if ((offset + count) <= ip->i_size)
 		return 0;
 
 	/*
@@ -611,7 +573,7 @@ xfs_iomap_write_delay(
 	xfs_extlen_t	extsz;
 	int		nimaps;
 	xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
-	int		prealloc, fsynced = 0;
+	int		prealloc, flushed = 0;
 	int		error;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
@@ -627,12 +589,12 @@ xfs_iomap_write_delay(
 	extsz = xfs_get_extsz_hint(ip);
 	offset_fsb = XFS_B_TO_FSBT(mp, offset);
 
-retry:
 	error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
 				ioflag, imap, XFS_WRITE_IMAPS, &prealloc);
 	if (error)
 		return error;
 
+retry:
 	if (prealloc) {
 		aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
 		ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
@@ -659,15 +621,22 @@ retry:
 
 	/*
 	 * If bmapi returned us nothing, and if we didn't get back EDQUOT,
-	 * then we must have run out of space - flush delalloc, and retry..
+	 * then we must have run out of space - flush all other inodes with
+	 * delalloc blocks and retry without EOF preallocation.
 	 */
 	if (nimaps == 0) {
 		xfs_iomap_enter_trace(XFS_IOMAP_WRITE_NOSPACE,
 					ip, offset, count);
-		if (xfs_flush_space(ip, &fsynced, &ioflag))
+		if (flushed)
 			return XFS_ERROR(ENOSPC);
 
+		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+		xfs_flush_inodes(ip);
+		xfs_ilock(ip, XFS_ILOCK_EXCL);
+
+		flushed = 1;
 		error = 0;
+		prealloc = 0;
 		goto retry;
 	}
 
diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h
index a1cc1322fc0..fdcf7b82747 100644
--- a/fs/xfs/xfs_iomap.h
+++ b/fs/xfs/xfs_iomap.h
@@ -40,8 +40,7 @@ typedef enum {
 	BMAPI_IGNSTATE = (1 << 4),	/* ignore unwritten state on read */
 	BMAPI_DIRECT = (1 << 5),	/* direct instead of buffered write */
 	BMAPI_MMAP = (1 << 6),		/* allocate for mmap write */
-	BMAPI_SYNC = (1 << 7),		/* sync write to flush delalloc space */
-	BMAPI_TRYLOCK = (1 << 8),	/* non-blocking request */
+	BMAPI_TRYLOCK = (1 << 7),	/* non-blocking request */
 } bmapi_flags_t;
 
 
-- 
GitLab


From 7281f5dc2c9582f3efaed9b367837ca6117d7b7f Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 6 Apr 2009 15:25:52 -0500
Subject: [PATCH 0020/1421] powerpc: Fix tlbilx opcode

The tlbilx opcode was not matching the Power ISA 2.06 arch spec.
The old opcode was an early suggested opcode that changed during the
2.06 architecture process.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc-opcode.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index f4a4db8d555..640ccbbc097 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -43,7 +43,7 @@
 
 #define PPC_INST_STSWI			0x7c0005aa
 #define PPC_INST_STSWX			0x7c00052a
-#define PPC_INST_TLBILX			0x7c000626
+#define PPC_INST_TLBILX			0x7c000024
 #define PPC_INST_WAIT			0x7c00007c
 
 /* macros to insert fields into opcodes */
-- 
GitLab


From e9965577406a2148ade97b5e0ce7c448b4ba4ef6 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 6 Apr 2009 23:36:50 -0500
Subject: [PATCH 0021/1421] powerpc: Add support for early tlbilx opcode

During the ISA 2.06 development the opcode for tlbilx changed and some
early implementations used to old opcode.  Add support for a MMU_FTR
fixup to deal with this.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu.h        |  6 ++++++
 arch/powerpc/include/asm/ppc-opcode.h | 11 ++++++++++-
 arch/powerpc/kernel/cputable.c        |  2 +-
 arch/powerpc/mm/tlb_nohash_low.S      | 14 +++++++++++++-
 4 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf15438709..86d2366ab6a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,12 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
+/* This indicates that the processor uses the wrong opcode for tlbilx
+ * instructions.  During the ISA 2.06 development the opcode for tlbilx
+ * changed and some early implementations used to old opcode
+ */
+#define MMU_FTR_TLBILX_EARLY_OPCODE	ASM_CONST(0x00400000)
+
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 640ccbbc097..ef4da37f3c1 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -44,6 +44,7 @@
 #define PPC_INST_STSWI			0x7c0005aa
 #define PPC_INST_STSWX			0x7c00052a
 #define PPC_INST_TLBILX			0x7c000024
+#define PPC_INST_TLBILX_EARLY		0x7c000626
 #define PPC_INST_WAIT			0x7c00007c
 
 /* macros to insert fields into opcodes */
@@ -63,10 +64,18 @@
 #define PPC_RFDI		stringify_in_c(.long PPC_INST_RFDI)
 #define PPC_RFMCI		stringify_in_c(.long PPC_INST_RFMCI)
 #define PPC_TLBILX(t, a, b)	stringify_in_c(.long PPC_INST_TLBILX | \
-					__PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+					__PPC_T_TLB(t) | \
+					__PPC_RA(a) | __PPC_RB(b))
 #define PPC_TLBILX_ALL(a, b)	PPC_TLBILX(0, a, b)
 #define PPC_TLBILX_PID(a, b)	PPC_TLBILX(1, a, b)
 #define PPC_TLBILX_VA(a, b)	PPC_TLBILX(3, a, b)
+
+#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \
+						__PPC_T_TLB(t) | \
+						__PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBILX_ALL_EARLY(a, b)	PPC_TLBILX_EARLY(0, a, b)
+#define PPC_TLBILX_PID_EARLY(a, b)	PPC_TLBILX_EARLY(1, a, b)
+#define PPC_TLBILX_VA_EARLY(a, b)	PPC_TLBILX_EARLY(3, a, b)
 #define PPC_WAIT(w)		stringify_in_c(.long PPC_INST_WAIT | \
 					__PPC_WC(w))
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cd1b687544f..57db50f4028 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_E500MC,
 		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
 		.mmu_features		= MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
-			MMU_FTR_USE_TLBILX,
+			MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 788b87c36f7..45fed369834 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -138,7 +138,11 @@ BEGIN_MMU_FTR_SECTION
 	andi.	r3,r3,MMUCSR0_TLBFI@l
 	bne	1b
 MMU_FTR_SECTION_ELSE
-	PPC_TLBILX_ALL(0,0)
+  BEGIN_MMU_FTR_SECTION_NESTED(96)
+	PPC_TLBILX_ALL(0,r3)
+  MMU_FTR_SECTION_ELSE_NESTED(96)
+	PPC_TLBILX_ALL_EARLY(0,r3)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
@@ -151,7 +155,11 @@ BEGIN_MMU_FTR_SECTION
 	wrteei	0
 	mfspr	r4,SPRN_MAS6	/* save MAS6 */
 	mtspr	SPRN_MAS6,r3
+  BEGIN_MMU_FTR_SECTION_NESTED(96)
 	PPC_TLBILX_PID(0,0)
+  MMU_FTR_SECTION_ELSE_NESTED(96)
+	PPC_TLBILX_PID_EARLY(0,0)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 	mtspr	SPRN_MAS6,r4	/* restore MAS6 */
 	wrtee	r10
 MMU_FTR_SECTION_ELSE
@@ -185,7 +193,11 @@ BEGIN_MMU_FTR_SECTION
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 MMU_FTR_SECTION_ELSE
+  BEGIN_MMU_FTR_SECTION_NESTED(96)
 	PPC_TLBILX_VA(0,r3)
+  MMU_FTR_SECTION_ELSE_NESTED(96)
+	PPC_TLBILX_VA_EARLY(0,r3)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
-- 
GitLab


From 6467cae318ba8adaab37a82e8dd8af60ca9ed6e4 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Mon, 16 Mar 2009 09:56:26 +0100
Subject: [PATCH 0022/1421] powerpc/85xx: TQM85xx: correct address of LM75 I2C
 device nodes

Commit 0f73a449a649acfca91404a98a35353a618b9555 added I2C device nodes
for the LM75 thermal sensor on the TQM85xx modules, unfortunately with
the wrong I2C address. The LM75s are located at address 0x48.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/tqm8540.dts          | 4 ++--
 arch/powerpc/boot/dts/tqm8541.dts          | 4 ++--
 arch/powerpc/boot/dts/tqm8548-bigflash.dts | 4 ++--
 arch/powerpc/boot/dts/tqm8548.dts          | 4 ++--
 arch/powerpc/boot/dts/tqm8555.dts          | 4 ++--
 arch/powerpc/boot/dts/tqm8560.dts          | 4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 231bae75663..b6f1fc6eb96 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -84,9 +84,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 4356a1f0829..fa6a3d54a8a 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -83,9 +83,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 28b1a95257c..a423042b691 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 826fb622cd3..6734dddef77 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 06d366ebbda..6a99f1eef7a 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -83,9 +83,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index feff915e049..b6c2d71defd 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
-- 
GitLab


From 655544c69c8d8bdc0c377ad1d30d147a5a28a1fb Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Mon, 16 Mar 2009 09:57:17 +0100
Subject: [PATCH 0023/1421] powerpc/85xx: TQM8548: use proper phy-handles for
 enet2 and enet3

For enet2 and enet3 the wrong phy-handles have been used in DTS files
of the TQM8548 modules.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/tqm8548-bigflash.dts | 4 ++--
 arch/powerpc/boot/dts/tqm8548.dts          | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index a423042b691..5b669ea0da2 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -247,7 +247,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 
 			mdio@520 {
 				#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 6734dddef77..61437bfd312 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -247,7 +247,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 
 			mdio@520 {
 				#address-cells = <1>;
-- 
GitLab


From 54ca40dcb5b956c30495e8c7b73c9ad636fb58bd Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Mon, 16 Mar 2009 09:57:59 +0100
Subject: [PATCH 0024/1421] powerpc/85xx: TQM8548: update defconfig

Enable highmem support for the TQM8548-AG modules and NAND support for
the TQM8548-BE modules. Furthermore disable USB, Wireless and IDE support
because it's not available on the STK85xx starter kit.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/85xx/tqm8548_defconfig | 164 ++++++--------------
 1 file changed, 48 insertions(+), 116 deletions(-)

diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 0bc45975911..43030fea2ee 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.29-rc7
+# Mon Mar 16 09:03:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -75,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -152,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -202,7 +207,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -244,6 +249,7 @@ CONFIG_UNEVICTABLE_LRU=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +265,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
 CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
@@ -284,10 +291,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
@@ -363,12 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,27 +474,18 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
+CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -515,69 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -650,7 +596,7 @@ CONFIG_MII=y
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-CONFIG_E1000=y
+# CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -668,6 +614,7 @@ CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -835,8 +782,6 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -975,26 +920,7 @@ CONFIG_HID=y
 # Special HID drivers
 #
 CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1064,16 +990,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1122,8 +1041,17 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1184,6 +1112,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -1219,6 +1149,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -1236,6 +1167,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
-- 
GitLab


From 38089c658bf372adc2bd7b3597fceac0c7cecca6 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 7 Apr 2009 16:35:56 +0200
Subject: [PATCH 0025/1421] HID: hidraw -- fix missing unlocks in
 unlocked_ioctl

There were 2 places that returned directly instead of releasing their
locks.  I sent a fix for this file earlier but ended up missing these
spots.  I think what happened is that I have improved my checker script
since then...  Or maybe I just screwed up.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hidraw.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index e263d473117..00ccf4b1985 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -285,8 +285,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 
 				if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
 					int len;
-					if (!hid->name)
-						return 0;
+					if (!hid->name) {
+						ret = 0;
+						break;
+					}
 					len = strlen(hid->name) + 1;
 					if (len > _IOC_SIZE(cmd))
 						len = _IOC_SIZE(cmd);
@@ -297,8 +299,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
 
 				if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
 					int len;
-					if (!hid->phys)
-						return 0;
+					if (!hid->phys) {
+						ret = 0;
+						break;
+					}
 					len = strlen(hid->phys) + 1;
 					if (len > _IOC_SIZE(cmd))
 						len = _IOC_SIZE(cmd);
-- 
GitLab


From 035a571120ddbe4f92b91bbe46f3eff05b6e43eb Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Tue, 7 Apr 2009 07:40:57 +0800
Subject: [PATCH 0026/1421] ocfs2: Reserve 1 more cluster in
 expanding_inline_dir for indexed dir.

In ocfs2_expand_inline_dir, we calculate whether we need 1 extra
cluster if we can't store the dx inline the root and save it in
dx_alloc. So add it when we call ocfs2_reserve_clusters.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index e71160cda11..07d89204f0d 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2934,7 +2934,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	 */
 	BUG_ON(alloc > 2);
 
-	ret = ocfs2_reserve_clusters(osb, alloc, &data_ac);
+	ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac);
 	if (ret) {
 		mlog_errno(ret);
 		goto out;
-- 
GitLab


From 6e9793812583e3c9e3674c8c8af1b114afae8673 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 7 Apr 2009 08:41:57 +0000
Subject: [PATCH 0027/1421] sh: urquell: Add board comment

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-urquell.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index 8367d1d789c..f217f355362 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -2,6 +2,8 @@
  * Renesas Technology Corp. SH7786 Urquell Support.
  *
  * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on board-sh7785lcr.c
  * Copyright (C) 2008  Yoshihiro Shimoda
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -21,6 +23,29 @@
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
 
+/* SWx  8765 4321
+ *----------------------------
+ * SW1  1101 0010  -> Pck 66MHz version
+ *     (0101 0010)    Pck 33MHz version (check CS1BCR)
+ * SW2  xxxx x1x0  -> little endian
+ *                    29bit mode
+ * SW47 0001 1000  -> CS0 : nor flash
+ *                    CS1 : SRAM, registers, LAN, PCMCIA
+ *                    38400 bps
+ *
+ * Address
+ * 0x00000000     Nor Flash
+ * 0x04000000     SRAM
+ * 0x05000000     FPGA register
+ * 0x05800000     LAN91C111
+ * 0x06000000     PCMCIA
+ * 0x10000000     PCIe
+ * 0x14000000     LRAM/URAM
+ * 0x18000000     ATA/NAND-Flash
+ * 0x1C000000     SH7786 Control register
+ */
+
+/* HeartBeat */
 static struct resource heartbeat_resources[] = {
 	[0] = {
 		.start	= BOARDREG(SLEDR),
@@ -43,6 +68,7 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+/* LAN91C111 */
 static struct smc91x_platdata smc91x_info = {
 	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 };
@@ -69,6 +95,7 @@ static struct platform_device smc91x_eth_device = {
 	},
 };
 
+/* Nor Flash */
 static struct mtd_partition nor_flash_partitions[] = {
 	{
 		.name		= "loader",
-- 
GitLab


From b35346fd25f3c8c0b6afeb778f8c4f41c5703c84 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 7 Apr 2009 17:11:15 -0700
Subject: [PATCH 0028/1421] sh: Provide cpumask_of_pcibus() to fix NUMA build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/topology.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index a3f23954589..8489a0905a8 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -37,8 +37,11 @@
 #define pcibus_to_node(bus)	((void)(bus), -1)
 #define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
 					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
+					node_to_cpumask(pcibus_to_node(bus)))
+#define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL_PTR : \
+					cpumask_of_node(pcibus_to_node(bus)))
+
 #endif
 
 #include <asm-generic/topology.h>
-- 
GitLab


From 52ce67f157f8c5623524dc6c5b2ddd6a0d2aa774 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 7 Apr 2009 21:58:07 -0500
Subject: [PATCH 0029/1421] powerpc/mm: Fix compile warning

arch/powerpc/mm/tlb_nohash.c: In function 'flush_tlb_mm':
arch/powerpc/mm/tlb_nohash.c:128: warning: unused variable 'cpu_mask'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/mm/tlb_nohash.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 7af72970fae..ad2eb4d34dd 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -125,7 +125,6 @@ static void do_flush_tlb_page_ipi(void *param)
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t cpu_mask;
 	unsigned int pid;
 
 	preempt_disable();
-- 
GitLab


From 8d82ffd15e59febf2c597067a777526958b7f769 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Tue, 7 Apr 2009 10:20:56 +0200
Subject: [PATCH 0030/1421] powerpc: Document new FSL I2C bindings and cleanup

This patch documents the new bindings for the MPC I2C bus driver.
Furthermore, it removes obsolete FSL device related definitions
for I2C.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 .../powerpc/dts-bindings/fsl/i2c.txt          | 46 +++++++++++++------
 include/linux/fsl_devices.h                   |  4 --
 2 files changed, 31 insertions(+), 19 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index d0ab33e21fe..b6d2e21474f 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -7,8 +7,10 @@ Required properties :
 
 Recommended properties :
 
- - compatible : Should be "fsl-i2c" for parts compatible with
-   Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -16,17 +18,31 @@ Recommended properties :
    controller you have.
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
-   a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
-   uses the FSL 5200 clocking mechanism.
-
-Example :
-	i2c@3000 {
-		interrupt-parent = <40000>;
-		interrupts = <1b 3>;
-		reg = <3000 18>;
-		device_type = "i2c";
-		compatible  = "fsl-i2c";
-		dfsrr;
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+   from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Examples :
+
+	i2c@3d00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+		cell-index = <0>;
+		reg = <0x3d00 0x40>;
+		interrupts = <2 15 0>;
+		interrupt-parent = <&mpc5200_pic>;
+		fsl,preserve-clocking;
 	};
+
+	i2c@3100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+		reg = <0x3100 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <400000>;
+	};
+
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index f2a78b5e8b5..43fc95d822d 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -43,10 +43,6 @@
  *
  */
 
-/* Flags related to I2C device features */
-#define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
-#define FSL_I2C_DEV_CLOCK_5200		0x00000002
-
 enum fsl_usb2_operating_modes {
 	FSL_USB2_MPH_HOST,
 	FSL_USB2_DR_HOST,
-- 
GitLab


From 06aa05b307e8efbc278f201198e7cdf3877bc5c2 Mon Sep 17 00:00:00 2001
From: Russ Anderson <rja@sgi.com>
Date: Fri, 3 Apr 2009 17:24:23 -0500
Subject: [PATCH 0031/1421] x86: prevent /sys/firmware/sgi_uv from being
 created on non-uv systems

/sys/firmware/sgi_uv should only be created on uv systems.

Signed-off-by: Russ Anderson <rja@sgi.com>
LKML-Reference: <20090403222423.GA28546@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/uv_sysfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c
index 67f9b9dbf80..36afb98675a 100644
--- a/arch/x86/kernel/uv_sysfs.c
+++ b/arch/x86/kernel/uv_sysfs.c
@@ -21,6 +21,7 @@
 
 #include <linux/sysdev.h>
 #include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
 
 struct kobject *sgi_uv_kobj;
 
@@ -47,6 +48,9 @@ static int __init sgi_uv_sysfs_init(void)
 {
 	unsigned long ret;
 
+	if (!is_uv_system())
+		return -ENODEV;
+
 	if (!sgi_uv_kobj)
 		sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
 	if (!sgi_uv_kobj) {
-- 
GitLab


From 54c28d294c658abb6d6430a49fda230fdfd601c8 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Fri, 3 Apr 2009 15:39:42 -0500
Subject: [PATCH 0032/1421] x86, uv: add Kconfig dependency on NUMA for UV
 systems

Impact: build fix

Add Kconfig dependency on NUMA for enabling UV. Although it might
be possible to configure non-NUMA UV systems, they are unsupported
and not interesting. Much of the infrastructure for UV requires
NUMA support.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090403203942.GA20137@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 748e50a1a15..2817ab5a120 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -354,6 +354,7 @@ config X86_UV
 	bool "SGI Ultraviolet"
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
+	depends on NUMA
 	select X86_X2APIC
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
-- 
GitLab


From 6911a9b8ae8b2a1dab4dfda9c2bd20f7ca2961d6 Mon Sep 17 00:00:00 2001
From: Ben Gamari <bgamari@gmail.com>
Date: Thu, 2 Apr 2009 11:24:54 -0700
Subject: [PATCH 0033/1421] drm/i915: Implement batch and ring buffer dumping

We create a debugfs node (i915_ringbuffer_data) to expose a hex dump
of the ring buffer itself.  We also expose another debugfs node
(i915_ringbuffer_info) with information on the state (i.e. head, tail
addresses) of the ringbuffer.

For batchbuffer dumping, we look at the device's active_list, dumping
each object which has I915_GEM_DOMAIN_COMMAND in its read
domains. This is all exposed through the dri/i915_batchbuffers debugfs
file with a header for each object (giving the objects gtt_offset so
that it can be matched against the offset given in the
BATCH_BUFFER_START command.

Signed-off-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h         |  2 +
 drivers/gpu/drm/i915/i915_gem.c         |  8 +--
 drivers/gpu/drm/i915/i915_gem_debugfs.c | 93 +++++++++++++++++++++++++
 3 files changed, 98 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 317b1223e09..efcd610d4fc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -635,6 +635,8 @@ int i915_gem_attach_phys_object(struct drm_device *dev,
 void i915_gem_detach_phys_object(struct drm_device *dev,
 				 struct drm_gem_object *obj);
 void i915_gem_free_all_phys_object(struct drm_device *dev);
+int i915_gem_object_get_pages(struct drm_gem_object *obj);
+void i915_gem_object_put_pages(struct drm_gem_object *obj);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 1449b452cc6..33ab07b0d71 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -43,8 +43,6 @@ static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
 						     uint64_t offset,
 						     uint64_t size);
 static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
-static int i915_gem_object_get_pages(struct drm_gem_object *obj);
-static void i915_gem_object_put_pages(struct drm_gem_object *obj);
 static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
 static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
 					   unsigned alignment);
@@ -1285,7 +1283,7 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
 	return 0;
 }
 
-static void
+void
 i915_gem_object_put_pages(struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -1884,7 +1882,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 	return ret;
 }
 
-static int
+int
 i915_gem_object_get_pages(struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -3243,7 +3241,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	exec_offset = exec_list[args->buffer_count - 1].offset;
 
 #if WATCH_EXEC
-	i915_gem_dump_object(object_list[args->buffer_count - 1],
+	i915_gem_dump_object(batch_obj,
 			      args->batch_len,
 			      __func__,
 			      ~0);
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index a1ac0c5e730..986f1082c59 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -234,6 +234,96 @@ static int i915_hws_info(struct seq_file *m, void *data)
 	return 0;
 }
 
+static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_count)
+{
+	int page, i;
+	uint32_t *mem;
+
+	for (page = 0; page < page_count; page++) {
+		mem = kmap(pages[page]);
+		for (i = 0; i < PAGE_SIZE; i += 4)
+			seq_printf(m, "%08x :  %08x\n", i, mem[i / 4]);
+		kunmap(pages[page]);
+	}
+}
+
+static int i915_batchbuffer_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
+	int ret;
+
+	spin_lock(&dev_priv->mm.active_list_lock);
+
+	list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+		obj = obj_priv->obj;
+		if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
+		    ret = i915_gem_object_get_pages(obj);
+		    if (ret) {
+			    DRM_ERROR("Failed to get pages: %d\n", ret);
+			    spin_unlock(&dev_priv->mm.active_list_lock);
+			    return ret;
+		    }
+
+		    seq_printf(m, "--- gtt_offset = 0x%08x\n", obj_priv->gtt_offset);
+		    i915_dump_pages(m, obj_priv->pages, obj->size / PAGE_SIZE);
+
+		    i915_gem_object_put_pages(obj);
+		}
+	}
+
+	spin_unlock(&dev_priv->mm.active_list_lock);
+
+	return 0;
+}
+
+static int i915_ringbuffer_data(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u8 *virt;
+	uint32_t *ptr, off;
+
+	if (!dev_priv->ring.ring_obj) {
+		seq_printf(m, "No ringbuffer setup\n");
+		return 0;
+	}
+
+	virt = dev_priv->ring.virtual_start;
+
+	for (off = 0; off < dev_priv->ring.Size; off += 4) {
+		ptr = (uint32_t *)(virt + off);
+		seq_printf(m, "%08x :  %08x\n", off, *ptr);
+	}
+
+	return 0;
+}
+
+static int i915_ringbuffer_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	unsigned int head, tail, mask;
+
+	head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+	tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+	mask = dev_priv->ring.tail_mask;
+
+	seq_printf(m, "RingHead :  %08x\n", head);
+	seq_printf(m, "RingTail :  %08x\n", tail);
+	seq_printf(m, "RingMask :  %08x\n", mask);
+	seq_printf(m, "RingSize :  %08lx\n", dev_priv->ring.Size);
+	seq_printf(m, "Acthd :  %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
+
+	return 0;
+}
+
+
 static struct drm_info_list i915_gem_debugfs_list[] = {
 	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
 	{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
@@ -243,6 +333,9 @@ static struct drm_info_list i915_gem_debugfs_list[] = {
 	{"i915_gem_fence_regs", i915_gem_fence_regs_info, 0},
 	{"i915_gem_interrupt", i915_interrupt_info, 0},
 	{"i915_gem_hws", i915_hws_info, 0},
+	{"i915_ringbuffer_data", i915_ringbuffer_data, 0},
+	{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
+	{"i915_batchbuffers", i915_batchbuffer_info, 0},
 };
 #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
 
-- 
GitLab


From 6115707be0e85a9b825f10e95143cb705b87fef8 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Fri, 3 Apr 2009 15:24:43 +0800
Subject: [PATCH 0034/1421] drm/i915: Fix a mismerge of the IGD patch (new
 .find_pll hooks missed)

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 64773ce5296..c2c8e95ff14 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -367,6 +367,7 @@ static const intel_limit_t intel_limits[] = {
         .p1  = { .min = I9XX_P1_MIN,		.max = I9XX_P1_MAX },
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
+	.find_pll = intel_find_best_PLL,
     },
     { /* INTEL_LIMIT_IGD_LVDS */
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
@@ -380,6 +381,7 @@ static const intel_limit_t intel_limits[] = {
 	/* IGD only supports single-channel mode. */
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
+	.find_pll = intel_find_best_PLL,
     },
 
 };
-- 
GitLab


From 9dff6af860d6b7f661d4360eb859837afaca0a1b Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Thu, 2 Apr 2009 13:13:26 +0800
Subject: [PATCH 0035/1421] drm/i915: sync hdmi detection by hdmi identifier
 with 2D

Currently we detect HDMI monitor by hardware detection, but if an HDMI-DVI
adapter is used to connect a DVI monitor, hardware detection will incorrectly
take monitor as HDMI. HDMI spec says any device containing IEEE registration
identifier will be treated as HDMI device.  The patch intends to detect HDMI
monitor by drm_detect_hdmi_monitor function which follows that rule.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 23 ++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_sdvo.c | 22 ++++++++++++++++++++--
 2 files changed, 40 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index b06a4a3ff08..55037422538 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -38,7 +38,7 @@
 struct intel_hdmi_priv {
 	u32 sdvox_reg;
 	u32 save_SDVOX;
-	int has_hdmi_sink;
+	bool has_hdmi_sink;
 };
 
 static void intel_hdmi_mode_set(struct drm_encoder *encoder,
@@ -128,6 +128,22 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
 	return true;
 }
 
+static void
+intel_hdmi_sink_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+	struct edid *edid = NULL;
+
+	edid = drm_get_edid(&intel_output->base,
+			    &intel_output->ddc_bus->adapter);
+	if (edid != NULL) {
+		hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+		kfree(edid);
+		intel_output->base.display_info.raw_edid = NULL;
+	}
+}
+
 static enum drm_connector_status
 intel_hdmi_detect(struct drm_connector *connector)
 {
@@ -158,9 +174,10 @@ intel_hdmi_detect(struct drm_connector *connector)
 		return connector_status_unknown;
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
+		intel_hdmi_sink_detect(connector);
 		return connector_status_connected;
-	else
+	} else
 		return connector_status_disconnected;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 7b31f55f55c..9913651c1e1 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1357,6 +1357,23 @@ void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
 	intel_sdvo_read_response(intel_output, &response, 2);
 }
 
+static void
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	struct edid *edid = NULL;
+
+	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+	edid = drm_get_edid(&intel_output->base,
+			    &intel_output->ddc_bus->adapter);
+	if (edid != NULL) {
+		sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+		kfree(edid);
+		intel_output->base.display_info.raw_edid = NULL;
+	}
+}
+
 static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
 {
 	u8 response[2];
@@ -1371,9 +1388,10 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect
 	if (status != SDVO_CMD_STATUS_SUCCESS)
 		return connector_status_unknown;
 
-	if ((response[0] != 0) || (response[1] != 0))
+	if ((response[0] != 0) || (response[1] != 0)) {
+		intel_sdvo_hdmi_sink_detect(connector);
 		return connector_status_connected;
-	else
+	} else
 		return connector_status_disconnected;
 }
 
-- 
GitLab


From 5b40f871158da7aaccff442645dae8b97c2e4d50 Mon Sep 17 00:00:00 2001
From: Ferenc Wagner <wferi@niif.hu>
Date: Mon, 6 Apr 2009 14:55:09 +0200
Subject: [PATCH 0036/1421] drm/i915: indicate framebuffer restore key in SysRq
 help message

At the same time, bring the action message closer to the usual format.

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index b7f0ebe9f81..3e094beecb9 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -864,8 +864,8 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
 
 static struct sysrq_key_op sysrq_intelfb_restore_op = {
         .handler = intelfb_sysrq,
-        .help_msg = "force fb",
-        .action_msg = "force restore of fb console",
+        .help_msg = "force-fb(G)",
+        .action_msg = "Restore framebuffer console",
 };
 
 int intelfb_probe(struct drm_device *dev)
-- 
GitLab


From 2bc43b5cf5158a26fa1328234795abed2dff5275 Mon Sep 17 00:00:00 2001
From: Florian Mickler <florian@mickler.org>
Date: Mon, 6 Apr 2009 22:55:41 +0200
Subject: [PATCH 0037/1421] drm/i915: Fix use of uninitialized var in 40a5f0de

i915_gem_put_relocs_to_user returned an uninitialized value which
got returned to userspace. This caused libdrm in my setup to never
get out of a do{}while() loop retrying i915_gem_execbuffer.

result was hanging X, overheating of cpu and 2-3gb of logfile-spam.

This patch adresses the issue by
 1. initializing vars in this file where necessary
 2. correcting wrongly interpreted return values of copy_[from/to]_user

Signed-off-by: Florian Mickler <florian@mickler.org>
[anholt: cleanups of unnecessary changes, consistency in APIs]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 34 +++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 33ab07b0d71..6f7d0e27036 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -141,15 +141,18 @@ fast_shmem_read(struct page **pages,
 		int length)
 {
 	char __iomem *vaddr;
-	int ret;
+	int unwritten;
 
 	vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0);
 	if (vaddr == NULL)
 		return -ENOMEM;
-	ret = __copy_to_user_inatomic(data, vaddr + page_offset, length);
+	unwritten = __copy_to_user_inatomic(data, vaddr + page_offset, length);
 	kunmap_atomic(vaddr, KM_USER0);
 
-	return ret;
+	if (unwritten)
+		return -EFAULT;
+
+	return 0;
 }
 
 static inline int
@@ -3000,13 +3003,13 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
 			drm_free(*relocs, reloc_count * sizeof(**relocs),
 				 DRM_MEM_DRIVER);
 			*relocs = NULL;
-			return ret;
+			return -EFAULT;
 		}
 
 		reloc_index += exec_list[i].relocation_count;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int
@@ -3015,23 +3018,28 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
 			    struct drm_i915_gem_relocation_entry *relocs)
 {
 	uint32_t reloc_count = 0, i;
-	int ret;
+	int ret = 0;
 
 	for (i = 0; i < buffer_count; i++) {
 		struct drm_i915_gem_relocation_entry __user *user_relocs;
+		int unwritten;
 
 		user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
 
-		if (ret == 0) {
-			ret = copy_to_user(user_relocs,
-					   &relocs[reloc_count],
-					   exec_list[i].relocation_count *
-					   sizeof(*relocs));
+		unwritten = copy_to_user(user_relocs,
+					 &relocs[reloc_count],
+					 exec_list[i].relocation_count *
+					 sizeof(*relocs));
+
+		if (unwritten) {
+			ret = -EFAULT;
+			goto err;
 		}
 
 		reloc_count += exec_list[i].relocation_count;
 	}
 
+err:
 	drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER);
 
 	return ret;
@@ -3306,10 +3314,12 @@ err:
 				   (uintptr_t) args->buffers_ptr,
 				   exec_list,
 				   sizeof(*exec_list) * args->buffer_count);
-		if (ret)
+		if (ret) {
+			ret = -EFAULT;
 			DRM_ERROR("failed to copy %d exec entries "
 				  "back to user (%d)\n",
 				  args->buffer_count, ret);
+		}
 	}
 
 	/* Copy the updated relocations out regardless of current error
-- 
GitLab


From e5e9ecde63ba365b510df0f4a9cb3b048a0ad785 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Tue, 7 Apr 2009 16:01:22 -0700
Subject: [PATCH 0038/1421] drm/i915: Correctly set the write flag for
 get_user_pages in pread.

Otherwise, the results of our read didn't show up when we were faulting in
the page being read into (as happened with a testcase reading into a big
stack area).  Likely accounts for some conformance test failures.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6f7d0e27036..3a1189d94a9 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -287,7 +287,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj,
 
 	down_read(&mm->mmap_sem);
 	pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr,
-				      num_pages, 0, 0, user_pages, NULL);
+				      num_pages, 1, 0, user_pages, NULL);
 	up_read(&mm->mmap_sem);
 	if (pinned_pages < num_pages) {
 		ret = -EFAULT;
-- 
GitLab


From 280b713b5b0fd84cf2469098aee88acbb5de859c Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Thu, 12 Mar 2009 16:56:27 -0700
Subject: [PATCH 0039/1421] drm/i915: Allow tiling of objects with bit 17
 swizzling by the CPU.

Save the bit 17 state of the pages when freeing the page list, and
reswizzle them if necessary when rebinding the pages (in case they were
swapped out).  Since we have userland with expectations that the swizzle
enums let it pread and pwrite contents accurately, we can't expose a new
swizzle enum for bit 17 (which it would have to GTT map to handle), so we
handle it down in pread and pwrite by swizzling the copy when bit 17 of the
page address is set.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h        |   5 +
 drivers/gpu/drm/i915/i915_gem.c        | 130 ++++++++++++++++++++++---
 drivers/gpu/drm/i915/i915_gem_tiling.c | 111 ++++++++++++++++++++-
 include/drm/i915_drm.h                 |   3 +
 4 files changed, 235 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index efcd610d4fc..bccd4146d55 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -446,6 +446,9 @@ struct drm_i915_gem_object {
 	uint32_t tiling_mode;
 	uint32_t stride;
 
+	/** Record of address bit 17 of each page at last unbind. */
+	long *bit_17;
+
 	/** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */
 	uint32_t agp_type;
 
@@ -640,6 +643,8 @@ void i915_gem_object_put_pages(struct drm_gem_object *obj);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
+void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
+void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
 
 /* i915_gem_debug.c */
 void i915_gem_dump_object(struct drm_gem_object *obj, int len,
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 3a1189d94a9..6dca9fc7c1d 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -155,6 +155,15 @@ fast_shmem_read(struct page **pages,
 	return 0;
 }
 
+static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj)
+{
+	drm_i915_private_t *dev_priv = obj->dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+		obj_priv->tiling_mode != I915_TILING_NONE;
+}
+
 static inline int
 slow_shmem_copy(struct page *dst_page,
 		int dst_offset,
@@ -182,6 +191,64 @@ slow_shmem_copy(struct page *dst_page,
 	return 0;
 }
 
+static inline int
+slow_shmem_bit17_copy(struct page *gpu_page,
+		      int gpu_offset,
+		      struct page *cpu_page,
+		      int cpu_offset,
+		      int length,
+		      int is_read)
+{
+	char *gpu_vaddr, *cpu_vaddr;
+
+	/* Use the unswizzled path if this page isn't affected. */
+	if ((page_to_phys(gpu_page) & (1 << 17)) == 0) {
+		if (is_read)
+			return slow_shmem_copy(cpu_page, cpu_offset,
+					       gpu_page, gpu_offset, length);
+		else
+			return slow_shmem_copy(gpu_page, gpu_offset,
+					       cpu_page, cpu_offset, length);
+	}
+
+	gpu_vaddr = kmap_atomic(gpu_page, KM_USER0);
+	if (gpu_vaddr == NULL)
+		return -ENOMEM;
+
+	cpu_vaddr = kmap_atomic(cpu_page, KM_USER1);
+	if (cpu_vaddr == NULL) {
+		kunmap_atomic(gpu_vaddr, KM_USER0);
+		return -ENOMEM;
+	}
+
+	/* Copy the data, XORing A6 with A17 (1). The user already knows he's
+	 * XORing with the other bits (A9 for Y, A9 and A10 for X)
+	 */
+	while (length > 0) {
+		int cacheline_end = ALIGN(gpu_offset + 1, 64);
+		int this_length = min(cacheline_end - gpu_offset, length);
+		int swizzled_gpu_offset = gpu_offset ^ 64;
+
+		if (is_read) {
+			memcpy(cpu_vaddr + cpu_offset,
+			       gpu_vaddr + swizzled_gpu_offset,
+			       this_length);
+		} else {
+			memcpy(gpu_vaddr + swizzled_gpu_offset,
+			       cpu_vaddr + cpu_offset,
+			       this_length);
+		}
+		cpu_offset += this_length;
+		gpu_offset += this_length;
+		length -= this_length;
+	}
+
+	kunmap_atomic(cpu_vaddr, KM_USER1);
+	kunmap_atomic(gpu_vaddr, KM_USER0);
+
+	return 0;
+}
+
 /**
  * This is the fast shmem pread path, which attempts to copy_from_user directly
  * from the backing pages of the object to the user's address space.  On a
@@ -270,6 +337,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj,
 	int page_length;
 	int ret;
 	uint64_t data_ptr = args->data_ptr;
+	int do_bit17_swizzling;
 
 	remain = args->size;
 
@@ -294,6 +362,8 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj,
 		goto fail_put_user_pages;
 	}
 
+	do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
 	mutex_lock(&dev->struct_mutex);
 
 	ret = i915_gem_object_get_pages(obj);
@@ -328,11 +398,20 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj,
 		if ((data_page_offset + page_length) > PAGE_SIZE)
 			page_length = PAGE_SIZE - data_page_offset;
 
-		ret = slow_shmem_copy(user_pages[data_page_index],
-				      data_page_offset,
-				      obj_priv->pages[shmem_page_index],
-				      shmem_page_offset,
-				      page_length);
+		if (do_bit17_swizzling) {
+			ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+						    shmem_page_offset,
+						    user_pages[data_page_index],
+						    data_page_offset,
+						    page_length,
+						    1);
+		} else {
+			ret = slow_shmem_copy(user_pages[data_page_index],
+					      data_page_offset,
+					      obj_priv->pages[shmem_page_index],
+					      shmem_page_offset,
+					      page_length);
+		}
 		if (ret)
 			goto fail_put_pages;
 
@@ -384,9 +463,14 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
-	if (ret != 0)
+	if (i915_gem_object_needs_bit17_swizzle(obj)) {
 		ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv);
+	} else {
+		ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
+		if (ret != 0)
+			ret = i915_gem_shmem_pread_slow(dev, obj, args,
+							file_priv);
+	}
 
 	drm_gem_object_unreference(obj);
 
@@ -728,6 +812,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 	int page_length;
 	int ret;
 	uint64_t data_ptr = args->data_ptr;
+	int do_bit17_swizzling;
 
 	remain = args->size;
 
@@ -752,6 +837,8 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 		goto fail_put_user_pages;
 	}
 
+	do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
 	mutex_lock(&dev->struct_mutex);
 
 	ret = i915_gem_object_get_pages(obj);
@@ -786,11 +873,20 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj,
 		if ((data_page_offset + page_length) > PAGE_SIZE)
 			page_length = PAGE_SIZE - data_page_offset;
 
-		ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
-				      shmem_page_offset,
-				      user_pages[data_page_index],
-				      data_page_offset,
-				      page_length);
+		if (do_bit17_swizzling) {
+			ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+						    shmem_page_offset,
+						    user_pages[data_page_index],
+						    data_page_offset,
+						    page_length,
+						    0);
+		} else {
+			ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
+					      shmem_page_offset,
+					      user_pages[data_page_index],
+					      data_page_offset,
+					      page_length);
+		}
 		if (ret)
 			goto fail_put_pages;
 
@@ -855,6 +951,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 			ret = i915_gem_gtt_pwrite_slow(dev, obj, args,
 						       file_priv);
 		}
+	} else if (i915_gem_object_needs_bit17_swizzle(obj)) {
+		ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file_priv);
 	} else {
 		ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file_priv);
 		if (ret == -EFAULT) {
@@ -1298,6 +1396,9 @@ i915_gem_object_put_pages(struct drm_gem_object *obj)
 	if (--obj_priv->pages_refcount != 0)
 		return;
 
+	if (obj_priv->tiling_mode != I915_TILING_NONE)
+		i915_gem_object_save_bit_17_swizzle(obj);
+
 	for (i = 0; i < page_count; i++)
 		if (obj_priv->pages[i] != NULL) {
 			if (obj_priv->dirty)
@@ -1923,6 +2024,10 @@ i915_gem_object_get_pages(struct drm_gem_object *obj)
 		}
 		obj_priv->pages[i] = page;
 	}
+
+	if (obj_priv->tiling_mode != I915_TILING_NONE)
+		i915_gem_object_do_bit_17_swizzle(obj);
+
 	return 0;
 }
 
@@ -3601,6 +3706,7 @@ void i915_gem_free_object(struct drm_gem_object *obj)
 	i915_gem_free_mmap_offset(obj);
 
 	drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+	kfree(obj_priv->bit_17);
 	drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 6be3f927c86..f27e523c764 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -25,6 +25,8 @@
  *
  */
 
+#include "linux/string.h"
+#include "linux/bitops.h"
 #include "drmP.h"
 #include "drm.h"
 #include "i915_drm.h"
@@ -127,8 +129,8 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 				swizzle_y = I915_BIT_6_SWIZZLE_9_11;
 			} else {
 				/* Bit 17 swizzling by the CPU in addition. */
-				swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-				swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
+				swizzle_y = I915_BIT_6_SWIZZLE_9_17;
 			}
 			break;
 		}
@@ -288,6 +290,19 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 			args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
 		else
 			args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
+
+		/* Hide bit 17 swizzling from the user.  This prevents old Mesa
+		 * from aborting the application on sw fallbacks to bit 17,
+		 * and we use the pread/pwrite bit17 paths to swizzle for it.
+		 * If there was a user that was relying on the swizzle
+		 * information for drm_intel_bo_map()ed reads/writes this would
+		 * break it, but we don't have any of those.
+		 */
+		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+			args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+			args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
 		/* If we can't handle the swizzling, make it untiled. */
 		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
 			args->tiling_mode = I915_TILING_NONE;
@@ -354,8 +369,100 @@ i915_gem_get_tiling(struct drm_device *dev, void *data,
 		DRM_ERROR("unknown tiling mode\n");
 	}
 
+	/* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
+	if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+		args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+	if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+		args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
 }
+
+/**
+ * Swap every 64 bytes of this page around, to account for it having a new
+ * bit 17 of its physical address and therefore being interpreted differently
+ * by the GPU.
+ */
+static int
+i915_gem_swizzle_page(struct page *page)
+{
+	char *vaddr;
+	int i;
+	char temp[64];
+
+	vaddr = kmap(page);
+	if (vaddr == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < PAGE_SIZE; i += 128) {
+		memcpy(temp, &vaddr[i], 64);
+		memcpy(&vaddr[i], &vaddr[i + 64], 64);
+		memcpy(&vaddr[i + 64], temp, 64);
+	}
+
+	kunmap(page);
+
+	return 0;
+}
+
+void
+i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int page_count = obj->size >> PAGE_SHIFT;
+	int i;
+
+	if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+		return;
+
+	if (obj_priv->bit_17 == NULL)
+		return;
+
+	for (i = 0; i < page_count; i++) {
+		char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17;
+		if ((new_bit_17 & 0x1) !=
+		    (test_bit(i, obj_priv->bit_17) != 0)) {
+			int ret = i915_gem_swizzle_page(obj_priv->pages[i]);
+			if (ret != 0) {
+				DRM_ERROR("Failed to swizzle page\n");
+				return;
+			}
+			set_page_dirty(obj_priv->pages[i]);
+		}
+	}
+}
+
+void
+i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int page_count = obj->size >> PAGE_SHIFT;
+	int i;
+
+	if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+		return;
+
+	if (obj_priv->bit_17 == NULL) {
+		obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
+					   sizeof(long), GFP_KERNEL);
+		if (obj_priv->bit_17 == NULL) {
+			DRM_ERROR("Failed to allocate memory for bit 17 "
+				  "record\n");
+			return;
+		}
+	}
+
+	for (i = 0; i < page_count; i++) {
+		if (page_to_phys(obj_priv->pages[i]) & (1 << 17))
+			__set_bit(i, obj_priv->bit_17);
+		else
+			__clear_bit(i, obj_priv->bit_17);
+	}
+}
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 67e3353a56d..95962fa8398 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -594,6 +594,9 @@ struct drm_i915_gem_busy {
 #define I915_BIT_6_SWIZZLE_9_10_11	4
 /* Not seen by userland */
 #define I915_BIT_6_SWIZZLE_UNKNOWN	5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17		6
+#define I915_BIT_6_SWIZZLE_9_10_17	7
 
 struct drm_i915_gem_set_tiling {
 	/** Handle of the buffer to have its tiling state updated */
-- 
GitLab


From d6382bf77e30799b78f19c0a129d4a9e0e9f2e2a Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 20 Feb 2009 23:01:26 -0800
Subject: [PATCH 0040/1421] xen: disable preempt for leave_lazy_mmu

xen_mc_flush() requires preemption to be disabled for its own sanity,
so disable it while we're flushing.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index db3802fb7b8..b6e56594fe1 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1819,7 +1819,6 @@ __init void xen_post_allocator_init(void)
 	xen_mark_init_mm_pinned();
 }
 
-
 const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.pagetable_setup_start = xen_pagetable_setup_start,
 	.pagetable_setup_done = xen_pagetable_setup_done,
-- 
GitLab


From e791ca0fd79461ad72559a6e01362da4d7d16253 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 26 Feb 2009 15:48:33 -0800
Subject: [PATCH 0041/1421] xen: separate p2m allocation from setting

When doing very early p2m setting, we need to separate setting
from allocation, so split things up accordingly.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c | 61 +++++++++++++++++++++++++++++++++-------------
 arch/x86/xen/mmu.h |  3 +++
 2 files changed, 47 insertions(+), 17 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index b6e56594fe1..0b2d554d1d5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -233,47 +233,74 @@ unsigned long get_phys_to_machine(unsigned long pfn)
 }
 EXPORT_SYMBOL_GPL(get_phys_to_machine);
 
-static void alloc_p2m(unsigned long **pp, unsigned long *mfnp)
+/* install a  new p2m_top page */
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p)
 {
-	unsigned long *p;
+	unsigned topidx = p2m_top_index(pfn);
+	unsigned long **pfnp, *mfnp;
 	unsigned i;
 
-	p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
-	BUG_ON(p == NULL);
+	pfnp = &p2m_top[topidx];
+	mfnp = &p2m_top_mfn[topidx];
 
 	for (i = 0; i < P2M_ENTRIES_PER_PAGE; i++)
 		p[i] = INVALID_P2M_ENTRY;
 
-	if (cmpxchg(pp, p2m_missing, p) != p2m_missing)
-		free_page((unsigned long)p);
-	else
+	if (cmpxchg(pfnp, p2m_missing, p) == p2m_missing) {
 		*mfnp = virt_to_mfn(p);
+		return true;
+	}
+
+	return false;
 }
 
-void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+static void alloc_p2m(unsigned long pfn)
 {
-	unsigned topidx, idx;
+	unsigned long *p;
 
-	if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
-		BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
-		return;
-	}
+	p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
+	BUG_ON(p == NULL);
+
+	if (!install_p2mtop_page(pfn, p))
+		free_page((unsigned long)p);
+}
+
+/* Try to install p2m mapping; fail if intermediate bits missing */
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	unsigned topidx, idx;
 
 	if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
 		BUG_ON(mfn != INVALID_P2M_ENTRY);
-		return;
+		return true;
 	}
 
 	topidx = p2m_top_index(pfn);
 	if (p2m_top[topidx] == p2m_missing) {
-		/* no need to allocate a page to store an invalid entry */
 		if (mfn == INVALID_P2M_ENTRY)
-			return;
-		alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]);
+			return true;
+		return false;
 	}
 
 	idx = p2m_index(pfn);
 	p2m_top[topidx][idx] = mfn;
+
+	return true;
+}
+
+void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+	if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
+		BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+		return;
+	}
+
+	if (unlikely(!__set_phys_to_machine(pfn, mfn)))  {
+		alloc_p2m(pfn);
+
+		if (!__set_phys_to_machine(pfn, mfn))
+			BUG();
+	}
 }
 
 unsigned long arbitrary_virt_to_mfn(void *vaddr)
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 24d1b44a337..da730262489 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -11,6 +11,9 @@ enum pt_level {
 };
 
 
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p);
+
 void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
 
-- 
GitLab


From cdaead6b4e657f960d6d6f9f380e7dfeedc6a09b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 27 Feb 2009 15:34:59 -0800
Subject: [PATCH 0042/1421] xen: split construction of p2m mfn tables from
 registration

Build the p2m_mfn_list_list early with the rest of the p2m table, but
register it later when the real shared_info structure is in place.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0b2d554d1d5..6e58acd4d00 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -184,7 +184,7 @@ static inline unsigned p2m_index(unsigned long pfn)
 }
 
 /* Build the parallel p2m_top_mfn structures */
-void xen_setup_mfn_list_list(void)
+static void __init xen_build_mfn_list_list(void)
 {
 	unsigned pfn, idx;
 
@@ -198,7 +198,10 @@ void xen_setup_mfn_list_list(void)
 		unsigned topidx = idx * P2M_ENTRIES_PER_PAGE;
 		p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]);
 	}
+}
 
+void xen_setup_mfn_list_list(void)
+{
 	BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
 
 	HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
@@ -218,6 +221,8 @@ void __init xen_build_dynamic_phys_to_machine(void)
 
 		p2m_top[topidx] = &mfn_list[pfn];
 	}
+
+	xen_build_mfn_list_list();
 }
 
 unsigned long get_phys_to_machine(unsigned long pfn)
-- 
GitLab


From c7da8c829b3f919089ff021d6ddc376d38299729 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 4 Mar 2009 13:02:18 -0800
Subject: [PATCH 0043/1421] xen: clean up xen_load_gdt

Makes the logic a bit clearer.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 82cd39a6cbd..8e024554a3e 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -301,10 +301,21 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 	frames = mcs.args;
 
 	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
-		frames[f] = arbitrary_virt_to_mfn((void *)va);
+		int level;
+		pte_t *ptep = lookup_address(va, &level);
+		unsigned long pfn, mfn;
+		void *virt;
+
+		BUG_ON(ptep == NULL);
+
+		pfn = pte_pfn(*ptep);
+		mfn = pfn_to_mfn(pfn);
+		virt = __va(PFN_PHYS(pfn));
+
+		frames[f] = mfn;
 
 		make_lowmem_page_readonly((void *)va);
-		make_lowmem_page_readonly(mfn_to_virt(frames[f]));
+		make_lowmem_page_readonly(virt);
 	}
 
 	MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
-- 
GitLab


From a957fac50023eac09368ab19d3a7ec725c2657c3 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 4 Mar 2009 15:26:00 -0800
Subject: [PATCH 0044/1421] xen: make xen_load_gdt simpler

Remove use of multicall machinery which is unused (gdt loading
is never performance critical).  This removes the implicit use
of percpu variables, which simplifies understanding how
the percpu code's use of load_gdt interacts with this code.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 8e024554a3e..334d2ffc4e2 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -284,12 +284,11 @@ static void xen_set_ldt(const void *addr, unsigned entries)
 
 static void xen_load_gdt(const struct desc_ptr *dtr)
 {
-	unsigned long *frames;
 	unsigned long va = dtr->address;
 	unsigned int size = dtr->size + 1;
 	unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+	unsigned long frames[pages];
 	int f;
-	struct multicall_space mcs;
 
 	/* A GDT can be up to 64k in size, which corresponds to 8192
 	   8-byte entries, or 16 4k pages.. */
@@ -297,9 +296,6 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 	BUG_ON(size > 65536);
 	BUG_ON(va & ~PAGE_MASK);
 
-	mcs = xen_mc_entry(sizeof(*frames) * pages);
-	frames = mcs.args;
-
 	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
 		int level;
 		pte_t *ptep = lookup_address(va, &level);
@@ -314,13 +310,15 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 
 		frames[f] = mfn;
 
+		printk("xen_load_gdt: %d va=%p mfn=%lx pfn=%lx va'=%p\n",
+		       f, (void *)va, mfn, pfn, virt);
+
 		make_lowmem_page_readonly((void *)va);
 		make_lowmem_page_readonly(virt);
 	}
 
-	MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
-
-	xen_mc_issue(PARAVIRT_LAZY_CPU);
+	if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+		BUG();
 }
 
 static void load_TLS_descriptor(struct thread_struct *t,
-- 
GitLab


From c667d5d6a77a5f33f9181bcf92a04fdc69712a2b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 4 Mar 2009 16:34:27 -0800
Subject: [PATCH 0045/1421] xen: remove xen_load_gdt debug

Don't need the noise.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 334d2ffc4e2..5d9a1c37c51 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -310,9 +310,6 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 
 		frames[f] = mfn;
 
-		printk("xen_load_gdt: %d va=%p mfn=%lx pfn=%lx va'=%p\n",
-		       f, (void *)va, mfn, pfn, virt);
-
 		make_lowmem_page_readonly((void *)va);
 		make_lowmem_page_readonly(virt);
 	}
-- 
GitLab


From 1207cf8eb99d8c699919e352292bdf1f519fbba5 Mon Sep 17 00:00:00 2001
From: Hannes Eder <hannes@hanneseder.net>
Date: Thu, 5 Mar 2009 20:13:57 +0100
Subject: [PATCH 0046/1421] NULL noise: arch/x86/xen/smp.c

Fix this sparse warnings:
  arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer
  arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/smp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 585a6e33083..429834ec168 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -317,7 +317,7 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 	BUG_ON(rc);
 
 	while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
-		HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+		HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
 		barrier();
 	}
 
@@ -422,7 +422,7 @@ static void xen_smp_send_call_function_ipi(const struct cpumask *mask)
 	/* Make sure other vcpus get a chance to run if they need to. */
 	for_each_cpu(cpu, mask) {
 		if (xen_vcpu_stolen(cpu)) {
-			HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+			HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
 			break;
 		}
 	}
-- 
GitLab


From 191216b9289ed02256086e6bab4f668112109399 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Sat, 7 Mar 2009 17:09:27 -0800
Subject: [PATCH 0047/1421] xen: mask XSAVE from cpuid

Xen leaves XSAVE set in cpuid, but doesn't allow cr4.OSXSAVE
to be set.  This confuses the kernel and it ends up crashing on
an xsetbv instruction.

At boot time, try to set cr4.OSXSAVE, and mask XSAVE out of
cpuid it we can't.  This will produce a spurious error from Xen,
but allows us to support XSAVE if/when Xen does.

This also factors out the cpuid mask decisions to boot time.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c | 50 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 44 insertions(+), 6 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 5d9a1c37c51..69de19168a7 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -168,21 +168,23 @@ static void __init xen_banner(void)
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
+static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
+
 static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 		      unsigned int *cx, unsigned int *dx)
 {
+	unsigned maskecx = ~0;
 	unsigned maskedx = ~0;
 
 	/*
 	 * Mask out inconvenient features, to try and disable as many
 	 * unsupported kernel subsystems as possible.
 	 */
-	if (*ax == 1)
-		maskedx = ~((1 << X86_FEATURE_APIC) |  /* disable APIC */
-			    (1 << X86_FEATURE_ACPI) |  /* disable ACPI */
-			    (1 << X86_FEATURE_MCE)  |  /* disable MCE */
-			    (1 << X86_FEATURE_MCA)  |  /* disable MCA */
-			    (1 << X86_FEATURE_ACC));   /* thermal monitoring */
+	if (*ax == 1) {
+		maskecx = cpuid_leaf1_ecx_mask;
+		maskedx = cpuid_leaf1_edx_mask;
+	}
 
 	asm(XEN_EMULATE_PREFIX "cpuid"
 		: "=a" (*ax),
@@ -190,9 +192,43 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 		  "=c" (*cx),
 		  "=d" (*dx)
 		: "0" (*ax), "2" (*cx));
+
+	*cx &= maskecx;
 	*dx &= maskedx;
 }
 
+static __init void xen_init_cpuid_mask(void)
+{
+	unsigned int ax, bx, cx, dx;
+
+	cpuid_leaf1_edx_mask =
+		~((1 << X86_FEATURE_MCE)  |  /* disable MCE */
+		  (1 << X86_FEATURE_MCA)  |  /* disable MCA */
+		  (1 << X86_FEATURE_ACC));   /* thermal monitoring */
+
+	if (!xen_initial_domain())
+		cpuid_leaf1_edx_mask &=
+			~((1 << X86_FEATURE_APIC) |  /* disable local APIC */
+			  (1 << X86_FEATURE_ACPI));  /* disable ACPI */
+
+	ax = 1;
+	xen_cpuid(&ax, &bx, &cx, &dx);
+
+	/* cpuid claims we support xsave; try enabling it to see what happens */
+	if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
+		unsigned long cr4;
+
+		set_in_cr4(X86_CR4_OSXSAVE);
+		
+		cr4 = read_cr4();
+
+		if ((cr4 & X86_CR4_OSXSAVE) == 0)
+			cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
+
+		clear_in_cr4(X86_CR4_OSXSAVE);
+	}
+}
+
 static void xen_set_debugreg(int reg, unsigned long val)
 {
 	HYPERVISOR_set_debugreg(reg, val);
@@ -903,6 +939,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_init_irq_ops();
 
+	xen_init_cpuid_mask();
+
 #ifdef CONFIG_X86_LOCAL_APIC
 	/*
 	 * set up the basic apic ops.
-- 
GitLab


From 10eceebeaac3049cad018d4a77c941a602cbd7a5 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Sun, 8 Mar 2009 03:59:04 -0700
Subject: [PATCH 0048/1421] x86-64: remove PGE from must-have feature list

PGE may not be available when running paravirtualized, so test the cpuid
bit before using it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/required-features.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
index d5cd6c58688..a4737dddfd5 100644
--- a/arch/x86/include/asm/required-features.h
+++ b/arch/x86/include/asm/required-features.h
@@ -50,7 +50,7 @@
 #ifdef CONFIG_X86_64
 #define NEED_PSE	0
 #define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
-#define NEED_PGE	(1<<(X86_FEATURE_PGE & 31))
+#define NEED_PGE	0
 #define NEED_FXSR	(1<<(X86_FEATURE_FXSR & 31))
 #define NEED_XMM	(1<<(X86_FEATURE_XMM & 31))
 #define NEED_XMM2	(1<<(X86_FEATURE_XMM2 & 31))
-- 
GitLab


From b40bf53effc0338ad7926aa1abce703af372cbd4 Mon Sep 17 00:00:00 2001
From: Alex Nixon <alex.nixon@citrix.com>
Date: Mon, 9 Feb 2009 12:05:46 -0800
Subject: [PATCH 0049/1421] Xen: Add virt_to_pfn helper function

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
---
 arch/x86/include/asm/xen/page.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 1a918dde46b..018a0a40079 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -124,7 +124,8 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
 
 /* VIRT <-> MACHINE conversion */
 #define virt_to_machine(v)	(phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v)		(pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v)		(pfn_to_mfn(virt_to_pfn(v)))
 #define mfn_to_virt(m)		(__va(mfn_to_pfn(m) << PAGE_SHIFT))
 
 static inline unsigned long pte_mfn(pte_t pte)
-- 
GitLab


From b96229b50d71c548302053c244b89572a5264c0b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 17 Mar 2009 13:30:55 -0700
Subject: [PATCH 0050/1421] xen/mmu: some early pagetable cleanups

1. make sure early-allocated ptes are pinned, so they can be later
   unpinned
2. don't pin pmd+pud, just make them RO
3. scatter some __inits around

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c     | 40 ++++++++++++++++++++++++++++------------
 arch/x86/xen/xen-ops.h |  2 --
 2 files changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 6e58acd4d00..4db24e1393a 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1019,7 +1019,7 @@ static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page,
 	return 0;
 }
 
-void __init xen_mark_init_mm_pinned(void)
+static void __init xen_mark_init_mm_pinned(void)
 {
 	xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
 }
@@ -1470,10 +1470,29 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
 }
 #endif
 
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+	struct mmuext_op op;
+	op.cmd = cmd;
+	op.arg1.mfn = pfn_to_mfn(pfn);
+	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+		BUG();
+}
+
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
 static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
 {
+#ifdef CONFIG_FLATMEM
+	BUG_ON(mem_map);	/* should only be used early */
+#endif
+	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+	pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+}
+
+/* Used for pmd and pud */
+static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+{
 #ifdef CONFIG_FLATMEM
 	BUG_ON(mem_map);	/* should only be used early */
 #endif
@@ -1482,18 +1501,15 @@ static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
 
 /* Early release_pte assumes that all pts are pinned, since there's
    only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
+static __init void xen_release_pte_init(unsigned long pfn)
 {
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
 
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+static __init void xen_release_pmd_init(unsigned long pfn)
 {
-	struct mmuext_op op;
-	op.cmd = cmd;
-	op.arg1.mfn = pfn_to_mfn(pfn);
-	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
-		BUG();
+	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
 
 /* This needs to make sure the new pte page is pinned iff its being
@@ -1874,9 +1890,9 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = {
 
 	.alloc_pte = xen_alloc_pte_init,
 	.release_pte = xen_release_pte_init,
-	.alloc_pmd = xen_alloc_pte_init,
+	.alloc_pmd = xen_alloc_pmd_init,
 	.alloc_pmd_clone = paravirt_nop,
-	.release_pmd = xen_release_pte_init,
+	.release_pmd = xen_release_pmd_init,
 
 #ifdef CONFIG_HIGHPTE
 	.kmap_atomic_pte = xen_kmap_atomic_pte,
@@ -1914,8 +1930,8 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.make_pud = PV_CALLEE_SAVE(xen_make_pud),
 	.set_pgd = xen_set_pgd_hyper,
 
-	.alloc_pud = xen_alloc_pte_init,
-	.release_pud = xen_release_pte_init,
+	.alloc_pud = xen_alloc_pmd_init,
+	.release_pud = xen_release_pmd_init,
 #endif	/* PAGETABLE_LEVELS == 4 */
 
 	.activate_mm = xen_activate_mm,
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 2f5ef2632ea..20139464943 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -57,8 +57,6 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id);
 
 bool xen_vcpu_stolen(int vcpu);
 
-void xen_mark_init_mm_pinned(void);
-
 void xen_setup_vcpu_info_placement(void);
 
 #ifdef CONFIG_SMP
-- 
GitLab


From e3f8a74e3a884b91a4390c66ed8175ef74db7067 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 4 Mar 2009 17:36:57 -0800
Subject: [PATCH 0051/1421] xen/mmu: weaken flush_tlb_other test

Impact: fixes crashing bug

There's no particular problem with getting an empty cpu mask,
so just shortcut-return if we get one.

Avoids crash reported by Christophe Saout <christophe@saout.de>

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 4db24e1393a..7ef880c51dc 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1302,8 +1302,8 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 	} *args;
 	struct multicall_space mcs;
 
-	BUG_ON(cpumask_empty(cpus));
-	BUG_ON(!mm);
+	if (cpumask_empty(cpus))
+		return;		/* nothing to do */
 
 	mcs = xen_mc_entry(sizeof(*args));
 	args = mcs.args;
-- 
GitLab


From 9a5a2cac9f99c98d9d15cec17b1904f29d0e8009 Mon Sep 17 00:00:00 2001
From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Wed, 25 Mar 2009 17:46:42 +0000
Subject: [PATCH 0052/1421] xen: resume interrupts before system devices.

Impact: bugfix Xen domain restore

Otherwise the first timer interrupt after resume is missed and we never
get another.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/manage.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 0d61db1e7b4..4b5b84837ee 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -62,14 +62,15 @@ static int xen_suspend(void *data)
 	gnttab_resume();
 	xen_mm_unpin_all();
 
-	sysdev_resume();
-
 	if (!*cancelled) {
 		xen_irq_resume();
 		xen_console_resume();
 		xen_timer_resume();
 	}
 
+	sysdev_resume();
+	device_power_up(PMSG_RESUME);
+
 	return 0;
 }
 
-- 
GitLab


From bc6081ff98eec627919e0c68415e46a78fe51dc4 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 27 Mar 2009 11:29:02 -0700
Subject: [PATCH 0053/1421] xen: set _PAGE_NX in __supported_pte_mask before
 pagetable construction

Some 64-bit machines don't support the NX flag in ptes.
Check for NX before constructing the kernel pagetables.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 69de19168a7..f7d0fd7ff8e 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -42,6 +42,7 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/fixmap.h>
 #include <asm/processor.h>
+#include <asm/proto.h>
 #include <asm/msr-index.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
@@ -914,7 +915,6 @@ static const struct machine_ops __initdata xen_machine_ops = {
 	.emergency_restart = xen_emergency_restart,
 };
 
-
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
@@ -982,6 +982,11 @@ asmlinkage void __init xen_start_kernel(void)
 	if (!xen_initial_domain())
 		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
+#ifdef CONFIG_X86_64
+	/* Work out if we support NX */
+	check_efer();
+#endif
+
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-- 
GitLab


From 2b2a733447b2bce5fef053df38412e4c0634ec22 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Sun, 29 Mar 2009 22:57:15 -0700
Subject: [PATCH 0054/1421] xen: clean up gate trap/interrupt constants

Use GATE_INTERRUPT/TRAP rather than 0xe/f.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/enlighten.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f7d0fd7ff8e..f09e8c36ee8 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -428,7 +428,7 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 static int cvt_gate_to_trap(int vector, const gate_desc *val,
 			    struct trap_info *info)
 {
-	if (val->type != 0xf && val->type != 0xe)
+	if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
 		return 0;
 
 	info->vector = vector;
@@ -436,8 +436,8 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val,
 	info->cs = gate_segment(*val);
 	info->flags = val->dpl;
 	/* interrupt gates clear IF */
-	if (val->type == 0xe)
-		info->flags |= 4;
+	if (val->type == GATE_INTERRUPT)
+		info->flags |= 1 << 2;
 
 	return 1;
 }
-- 
GitLab


From d745562cc40bff60f0597004d8128fa0225cc267 Mon Sep 17 00:00:00 2001
From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Thu, 2 Apr 2009 13:24:28 +0100
Subject: [PATCH 0055/1421] xen: honour VCPU availability on boot

If a VM is booted with offline VCPUs then unplug them during boot. Determining
the availability of a VCPU requires access to XenStore which is not available
at the point smp_prepare_cpus() is called, therefore we bring up all VCPUS
initially and unplug the offline ones as soon as XenStore becomes available.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
 drivers/xen/cpu_hotplug.c | 40 +++++++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c
index 5f54c01c156..bdfd584ad85 100644
--- a/drivers/xen/cpu_hotplug.c
+++ b/drivers/xen/cpu_hotplug.c
@@ -21,29 +21,41 @@ static void disable_hotplug_cpu(int cpu)
 	set_cpu_present(cpu, false);
 }
 
-static void vcpu_hotplug(unsigned int cpu)
+static int vcpu_online(unsigned int cpu)
 {
 	int err;
 	char dir[32], state[32];
 
-	if (!cpu_possible(cpu))
-		return;
-
 	sprintf(dir, "cpu/%u", cpu);
 	err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
 	if (err != 1) {
 		printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
-		return;
+		return err;
 	}
 
-	if (strcmp(state, "online") == 0) {
+	if (strcmp(state, "online") == 0)
+		return 1;
+	else if (strcmp(state, "offline") == 0)
+		return 0;
+
+	printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu);
+	return -EINVAL;
+}
+static void vcpu_hotplug(unsigned int cpu)
+{
+	if (!cpu_possible(cpu))
+		return;
+
+	switch (vcpu_online(cpu)) {
+	case 1:
 		enable_hotplug_cpu(cpu);
-	} else if (strcmp(state, "offline") == 0) {
+		break;
+	case 0:
 		(void)cpu_down(cpu);
 		disable_hotplug_cpu(cpu);
-	} else {
-		printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n",
-		       state, cpu);
+		break;
+	default:
+		break;
 	}
 }
 
@@ -64,12 +76,20 @@ static void handle_vcpu_hotplug_event(struct xenbus_watch *watch,
 static int setup_cpu_watcher(struct notifier_block *notifier,
 			      unsigned long event, void *data)
 {
+	int cpu;
 	static struct xenbus_watch cpu_watch = {
 		.node = "cpu",
 		.callback = handle_vcpu_hotplug_event};
 
 	(void)register_xenbus_watch(&cpu_watch);
 
+	for_each_possible_cpu(cpu) {
+		if (vcpu_online(cpu) == 0) {
+			(void)cpu_down(cpu);
+			cpu_clear(cpu, cpu_present_map);
+		}
+	}
+
 	return NOTIFY_DONE;
 }
 
-- 
GitLab


From c56c81abe7e684bc6203632d807303eb765690dc Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Wed, 8 Apr 2009 15:08:23 -0700
Subject: [PATCH 0056/1421] dmatest: fix max channels handling

The check for reaching max_channels is short circuited by 'continuing'
after successfully adding a channel.

[ Impact: make the 'max_channels' module parameter actually have an effect ]

Cc: <stable@kernel.org>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmatest.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a27c0fb1bc1..fb7da5141e9 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -531,9 +531,7 @@ static int __init dmatest_init(void)
 		chan = dma_request_channel(mask, filter, NULL);
 		if (chan) {
 			err = dmatest_add_channel(chan);
-			if (err == 0)
-				continue;
-			else {
+			if (err) {
 				dma_release_channel(chan);
 				break; /* add_channel failed, punt */
 			}
-- 
GitLab


From 3ecb1b7df92393647b13b21b1f7142b65c582511 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Sat, 7 Mar 2009 23:48:41 -0800
Subject: [PATCH 0057/1421] xen: add FIX_TEXT_POKE to fixmap

FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping
pfns, not mfns.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/mmu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 7ef880c51dc..c3061d318da 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1821,6 +1821,9 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
 #ifdef CONFIG_X86_LOCAL_APIC
 	case FIX_APIC_BASE:	/* maps dummy local APIC */
 #endif
+	case FIX_TEXT_POKE0:
+	case FIX_TEXT_POKE1:
+		/* All local page mappings */
 		pte = pfn_pte(phys, prot);
 		break;
 
-- 
GitLab


From 0e983d3c38f87d405beb1ebbe2fea11eb01cc4c6 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 9 Apr 2009 14:05:02 +0800
Subject: [PATCH 0058/1421] [ARM] pxa/colibri: fix missing variable name in
 inline functions

Even they are empty inline functions, the compiler still complains
about the missing variable names.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Daniel Mack <daniel@caiaq.de>
---
 arch/arm/mach-pxa/include/mach/colibri.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 90230c6f992..a88d7caff0d 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,13 +10,13 @@
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
 #else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 extern void colibri_pxa3xx_init_lcd(int bl_pin);
 #else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 #endif
 
 #if defined(CONFIG_AX88796)
-- 
GitLab


From fd2bd98818fc1c9672241b845344cbfbb159a4f9 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Thu, 9 Apr 2009 14:13:07 +0800
Subject: [PATCH 0059/1421] ASoC: magician: remove un-necessary #include of
 pxa-regs.h and hardware.h

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/pxa/magician.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index f7c4544f785..0625c342a1c 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -27,8 +27,6 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/magician.h>
 #include <asm/mach-types.h>
 #include "../codecs/uda1380.h"
-- 
GitLab


From ce60a2f15764f296b0467960759351702c7d2986 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Thu, 9 Apr 2009 17:37:52 +0200
Subject: [PATCH 0060/1421] fuse: fix argument type in fuse_get_user_pages()

Fix the following warning:

fs/fuse/file.c: In function 'fuse_direct_io':
fs/fuse/file.c:1002: warning: passing argument 3 of 'fuse_get_user_pages' from incompatible pointer type

This was introduced by commit f4975c67 "fuse: allow kernel to access
"direct_io" files".

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/fuse/file.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 2b25133524a..0946861b10b 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -938,9 +938,9 @@ static void fuse_release_user_pages(struct fuse_req *req, int write)
 }
 
 static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
-			       unsigned *nbytesp, int write)
+			       size_t *nbytesp, int write)
 {
-	unsigned nbytes = *nbytesp;
+	size_t nbytes = *nbytesp;
 	unsigned long user_addr = (unsigned long) buf;
 	unsigned offset = user_addr & ~PAGE_MASK;
 	int npages;
@@ -955,7 +955,7 @@ static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
 		return 0;
 	}
 
-	nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
+	nbytes = min_t(size_t, nbytes, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
 	npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
 	down_read(&current->mm->mmap_sem);
-- 
GitLab


From 3121bfe7631126d1b13064855ac2cfa164381bb0 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Thu, 9 Apr 2009 17:37:53 +0200
Subject: [PATCH 0061/1421] fuse: fix "direct_io" private mmap

MAP_PRIVATE mmap could return stale data from the cache for
"direct_io" files.  Fix this by flushing the cache on mmap.

Found with a slightly modified fsx-linux.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/fuse/file.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 0946861b10b..06f30e96567 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1298,6 +1298,8 @@ static int fuse_direct_mmap(struct file *file, struct vm_area_struct *vma)
 	if (vma->vm_flags & VM_MAYSHARE)
 		return -ENODEV;
 
+	invalidate_inode_pages2(file->f_mapping);
+
 	return generic_file_mmap(file, vma);
 }
 
-- 
GitLab


From 6e498d5eb6afb50659b4b7fc302d480ca0ceaa93 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Apr 2009 16:40:41 +0100
Subject: [PATCH 0062/1421] ASoC: Disable S3C64xx support in Kconfig

Due to the process and communications issues with the 2.6.30 S3C
platform merges none of the underlying arch/arm code for S3C64xx audio
support made it into mainline, rendering the drivers useless.  Disable
them in Kconfig to avoid user confusion - users patching in the required
support can always reenable this too.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 2f3a21eee05..df494d1e346 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,10 +1,10 @@
 config SND_S3C24XX_SOC
 	tristate "SoC Audio for the Samsung S3CXXXX chips"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410
 	help
 	  Say Y or M if you want to add support for codecs attached to
-	  the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will
-	  also need to select the audio interfaces to support below.
+	  the S3C24XX AC97 or I2S interfaces. You will also need to
+	  select the audio interfaces to support below.
 
 config SND_S3C24XX_SOC_I2S
 	tristate
-- 
GitLab


From f802d969b6a89d3f9b67ef879179824d53420ebe Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 9 Apr 2009 10:36:54 -0700
Subject: [PATCH 0063/1421] sh: Add support for DMA API debugging.

This wires up support for the generic DMA API debugging.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                   |  1 +
 arch/sh/include/asm/dma-mapping.h | 36 ++++++++++++++++++++++++++-----
 arch/sh/include/asm/scatterlist.h | 11 +++++-----
 arch/sh/mm/consistent.c           | 19 ++++++++++------
 4 files changed, 51 insertions(+), 16 deletions(-)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5e4babecf93..45f4a322ce4 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -14,6 +14,7 @@ config SUPERH
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DMA_API_DEBUG
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 627315ecdb5..ea9d4f41c9d 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -3,6 +3,7 @@
 
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 #include <asm-generic/dma-coherent.h>
@@ -38,16 +39,26 @@ static inline dma_addr_t dma_map_single(struct device *dev,
 					void *ptr, size_t size,
 					enum dma_data_direction dir)
 {
+	dma_addr_t addr = virt_to_phys(ptr);
+
 #if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
 	if (dev->bus == &pci_bus_type)
-		return virt_to_phys(ptr);
+		return addr;
 #endif
 	dma_cache_sync(dev, ptr, size, dir);
 
-	return virt_to_phys(ptr);
+	debug_dma_map_page(dev, virt_to_page(ptr),
+			   (unsigned long)ptr & ~PAGE_MASK, size,
+			   dir, addr, true);
+
+	return addr;
 }
 
-#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+				    size_t size, enum dma_data_direction dir)
+{
+	debug_dma_unmap_page(dev, addr, size, dir, true);
+}
 
 static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
 			     int nents, enum dma_data_direction dir)
@@ -59,12 +70,19 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
 		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
 #endif
 		sg[i].dma_address = sg_phys(&sg[i]);
+		sg[i].dma_length = sg[i].length;
 	}
 
+	debug_dma_map_sg(dev, sg, nents, i, dir);
+
 	return nents;
 }
 
-#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction dir)
+{
+	debug_dma_unmap_sg(dev, sg, nents, dir);
+}
 
 static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 				      unsigned long offset, size_t size,
@@ -111,6 +129,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
 		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
 #endif
 		sg[i].dma_address = sg_phys(&sg[i]);
+		sg[i].dma_length = sg[i].length;
 	}
 }
 
@@ -119,6 +138,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 					   enum dma_data_direction dir)
 {
 	dma_sync_single(dev, dma_handle, size, dir);
+	debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
 }
 
 static inline void dma_sync_single_for_device(struct device *dev,
@@ -127,6 +147,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 					      enum dma_data_direction dir)
 {
 	dma_sync_single(dev, dma_handle, size, dir);
+	debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
 }
 
 static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -136,6 +157,8 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 						 enum dma_data_direction direction)
 {
 	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+	debug_dma_sync_single_range_for_cpu(dev, dma_handle,
+					    offset, size, direction);
 }
 
 static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -145,6 +168,8 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 						    enum dma_data_direction direction)
 {
 	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+	debug_dma_sync_single_range_for_device(dev, dma_handle,
+					       offset, size, direction);
 }
 
 
@@ -153,6 +178,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 				       enum dma_data_direction dir)
 {
 	dma_sync_sg(dev, sg, nelems, dir);
+	debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
 }
 
 static inline void dma_sync_sg_for_device(struct device *dev,
@@ -160,9 +186,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 					  enum dma_data_direction dir)
 {
 	dma_sync_sg(dev, sg, nelems, dir);
+	debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
 }
 
-
 static inline int dma_get_cache_alignment(void)
 {
 	/*
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 2084d037369..c693d268a41 100644
--- a/arch/sh/include/asm/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
@@ -5,12 +5,13 @@
 
 struct scatterlist {
 #ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
+	unsigned long	sg_magic;
 #endif
-    unsigned long page_link;
-    unsigned int offset;/* for highmem, page offset */
-    dma_addr_t dma_address;
-    unsigned int length;
+	unsigned long	page_link;
+	unsigned int	offset;		/* for highmem, page offset */
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
 };
 
 #define ISA_DMA_THRESHOLD	PHYS_ADDR_MASK
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index edcd5fbf965..8c9ee855328 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
 #include <asm/io.h>
@@ -45,6 +46,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 	split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
 
 	*dma_handle = virt_to_phys(ret);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache);
+
 	return ret_nocache;
 }
 EXPORT_SYMBOL(dma_alloc_coherent);
@@ -56,12 +60,15 @@ void dma_free_coherent(struct device *dev, size_t size,
 	unsigned long pfn = dma_handle >> PAGE_SHIFT;
 	int k;
 
-	if (!dma_release_from_coherent(dev, order, vaddr)) {
-		WARN_ON(irqs_disabled());	/* for portability */
-		for (k = 0; k < (1 << order); k++)
-			__free_pages(pfn_to_page(pfn + k), 0);
-		iounmap(vaddr);
-	}
+	WARN_ON(irqs_disabled());	/* for portability */
+
+	if (dma_release_from_coherent(dev, order, vaddr))
+		return;
+
+	debug_dma_free_coherent(dev, size, vaddr, dma_handle);
+	for (k = 0; k < (1 << order); k++)
+		__free_pages(pfn_to_page(pfn + k), 0);
+	iounmap(vaddr);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-- 
GitLab


From fa00e046b41663cbda9b1affc0594669e5f14219 Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Fri, 10 Apr 2009 12:20:45 +0200
Subject: [PATCH 0064/1421] [ALSA] hda_intel: fix unexpected ring buffer
 positions

I found two issues with ICH7-M (it should be related to other HDA chipsets
as well):

- the ring buffer position is not reset when stream restarts (after xrun) -
  solved by moving azx_stream_reset() call from open() to prepare() callback
  and reset posbuf to zero (it might be filled with hw later than position()
  callback is called)
- irq_ignore flag should be set also when ring buffer memory area is not
  changed in prepare() callback - this patch replaces irq_ignore with
  more universal check based on jiffies clock

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/hda/hda_intel.c | 39 +++++++++++++++++++++++++--------------
 1 file changed, 25 insertions(+), 14 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 30829ee920c..6d3b927e0f8 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -312,6 +312,9 @@ struct azx_dev {
 	unsigned int period_bytes; /* size of the period in bytes */
 	unsigned int frags;	/* number for period in the play buffer */
 	unsigned int fifo_size;	/* FIFO size */
+	unsigned int start_flag: 1;	/* stream full start flag */
+	unsigned long start_jiffies;	/* start + minimum jiffies */
+	unsigned long min_jiffies;	/* minimum jiffies before position is valid */
 
 	void __iomem *sd_addr;	/* stream descriptor pointer */
 
@@ -330,7 +333,6 @@ struct azx_dev {
 	unsigned int opened :1;
 	unsigned int running :1;
 	unsigned int irq_pending :1;
-	unsigned int irq_ignore :1;
 	/*
 	 * For VIA:
 	 *  A flag to ensure DMA position is 0
@@ -975,7 +977,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id)
 	struct azx *chip = dev_id;
 	struct azx_dev *azx_dev;
 	u32 status;
-	int i;
+	int i, ok;
 
 	spin_lock(&chip->reg_lock);
 
@@ -991,18 +993,14 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id)
 			azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
 			if (!azx_dev->substream || !azx_dev->running)
 				continue;
-			/* ignore the first dummy IRQ (due to pos_adj) */
-			if (azx_dev->irq_ignore) {
-				azx_dev->irq_ignore = 0;
-				continue;
-			}
 			/* check whether this IRQ is really acceptable */
-			if (azx_position_ok(chip, azx_dev)) {
+			ok = azx_position_ok(chip, azx_dev);
+			if (ok == 1) {
 				azx_dev->irq_pending = 0;
 				spin_unlock(&chip->reg_lock);
 				snd_pcm_period_elapsed(azx_dev->substream);
 				spin_lock(&chip->reg_lock);
-			} else if (chip->bus && chip->bus->workq) {
+			} else if (ok == 0 && chip->bus && chip->bus->workq) {
 				/* bogus IRQ, process it later */
 				azx_dev->irq_pending = 1;
 				queue_work(chip->bus->workq,
@@ -1088,7 +1086,6 @@ static int azx_setup_periods(struct azx *chip,
 	bdl = (u32 *)azx_dev->bdl.area;
 	ofs = 0;
 	azx_dev->frags = 0;
-	azx_dev->irq_ignore = 0;
 	pos_adj = bdl_pos_adj[chip->dev_index];
 	if (pos_adj > 0) {
 		struct snd_pcm_runtime *runtime = substream->runtime;
@@ -1109,7 +1106,6 @@ static int azx_setup_periods(struct azx *chip,
 					 &bdl, ofs, pos_adj, 1);
 			if (ofs < 0)
 				goto error;
-			azx_dev->irq_ignore = 1;
 		}
 	} else
 		pos_adj = 0;
@@ -1155,6 +1151,9 @@ static void azx_stream_reset(struct azx *chip, struct azx_dev *azx_dev)
 	while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
 	       --timeout)
 		;
+
+	/* reset first position - may not be synced with hw at this time */
+	*azx_dev->posbuf = 0;
 }
 
 /*
@@ -1409,7 +1408,6 @@ static int azx_pcm_open(struct snd_pcm_substream *substream)
 	snd_pcm_set_sync(substream);
 	mutex_unlock(&chip->open_mutex);
 
-	azx_stream_reset(chip, azx_dev);
 	return 0;
 }
 
@@ -1474,6 +1472,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
 	unsigned int bufsize, period_bytes, format_val;
 	int err;
 
+	azx_stream_reset(chip, azx_dev);
 	format_val = snd_hda_calc_stream_format(runtime->rate,
 						runtime->channels,
 						runtime->format,
@@ -1502,6 +1501,8 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
 			return err;
 	}
 
+	azx_dev->min_jiffies = (runtime->period_size * HZ) /
+						(runtime->rate * 2);
 	azx_setup_controller(chip, azx_dev);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
@@ -1518,13 +1519,14 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	struct azx *chip = apcm->chip;
 	struct azx_dev *azx_dev;
 	struct snd_pcm_substream *s;
-	int start, nsync = 0, sbits = 0;
+	int rstart = 0, start, nsync = 0, sbits = 0;
 	int nwait, timeout;
 
 	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		rstart = 1;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_START:
 		start = 1;
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1554,6 +1556,10 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 		if (s->pcm->card != substream->pcm->card)
 			continue;
 		azx_dev = get_azx_dev(s);
+		if (rstart) {
+			azx_dev->start_flag = 1;
+			azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies;
+		}
 		if (start)
 			azx_stream_start(chip, azx_dev);
 		else
@@ -1703,6 +1709,11 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
 {
 	unsigned int pos;
 
+	if (azx_dev->start_flag &&
+	    time_before_eq(jiffies, azx_dev->start_jiffies))
+		return -1;	/* bogus (too early) interrupt */
+	azx_dev->start_flag = 0;
+
 	pos = azx_get_position(chip, azx_dev);
 	if (chip->position_fix == POS_FIX_AUTO) {
 		if (!pos) {
-- 
GitLab


From bbf6ad1399e9516b0a95de3ad58ffbaed670e4cc Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Fri, 10 Apr 2009 12:28:58 +0200
Subject: [PATCH 0065/1421] [ALSA] pcm-midlevel: Add more strict buffer
 position checks based on jiffies

Some drivers like Intel8x0 or Intel HDA are broken for some hardware variants.
This patch adds more strict buffer position checks based on jiffies when
internal hw_ptr is updated. Enable xrun_debug to see mangling of wrong
positions.

As a side effect, the hw_ptr interrupt update routine might do slightly better
job when many interrupts are lost.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 include/sound/pcm.h  |  3 ++-
 sound/core/pcm_lib.c | 47 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 41 insertions(+), 9 deletions(-)

diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 8904b1900d7..c1729689161 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -268,7 +268,8 @@ struct snd_pcm_runtime {
 	int overrange;
 	snd_pcm_uframes_t avail_max;
 	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
-	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/
+	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
+	unsigned long hw_ptr_jiffies;	/* Time when hw_ptr is updated */
 
 	/* -- HW params -- */
 	snd_pcm_access_t access;	/* access mode */
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index fbb2e391591..63d088f2265 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -209,9 +209,11 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	snd_pcm_uframes_t pos;
-	snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base;
-	snd_pcm_sframes_t delta;
+	snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base;
+	snd_pcm_sframes_t hdelta, delta;
+	unsigned long jdelta;
 
+	old_hw_ptr = runtime->status->hw_ptr;
 	pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
 	if (pos == SNDRV_PCM_POS_XRUN) {
 		xrun(substream);
@@ -247,7 +249,30 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 			new_hw_ptr = hw_base + pos;
 		}
 	}
-	if (delta > runtime->period_size) {
+	hdelta = new_hw_ptr - old_hw_ptr;
+	jdelta = jiffies - runtime->hw_ptr_jiffies;
+	if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
+		delta = jdelta /
+			(((runtime->period_size * HZ) / runtime->rate)
+								+ HZ/100);
+		hw_ptr_error(substream,
+			     "hw_ptr skipping! [Q] "
+			     "(pos=%ld, delta=%ld, period=%ld, "
+			     "jdelta=%lu/%lu/%lu)\n",
+			     (long)pos, (long)hdelta,
+			     (long)runtime->period_size, jdelta,
+			     ((hdelta * HZ) / runtime->rate), delta);
+		hw_ptr_interrupt = runtime->hw_ptr_interrupt +
+				   runtime->period_size * delta;
+		if (hw_ptr_interrupt >= runtime->boundary)
+			hw_ptr_interrupt -= runtime->boundary;
+		/* rebase to interrupt position */
+		hw_base = new_hw_ptr = hw_ptr_interrupt;
+		/* align hw_base to buffer_size */
+		hw_base -= hw_base % runtime->buffer_size;
+		delta = 0;
+	}
+	if (delta > runtime->period_size + runtime->period_size / 2) {
 		hw_ptr_error(substream,
 			     "Lost interrupts? "
 			     "(stream=%i, delta=%ld, intr_ptr=%ld)\n",
@@ -263,6 +288,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
+	runtime->hw_ptr_jiffies = jiffies;
 	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
@@ -275,6 +301,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 	snd_pcm_uframes_t pos;
 	snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
 	snd_pcm_sframes_t delta;
+	unsigned long jdelta;
 
 	old_hw_ptr = runtime->status->hw_ptr;
 	pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
@@ -286,14 +313,15 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 	new_hw_ptr = hw_base + pos;
 
 	delta = new_hw_ptr - old_hw_ptr;
+	jdelta = jiffies - runtime->hw_ptr_jiffies;
 	if (delta < 0) {
 		delta += runtime->buffer_size;
 		if (delta < 0) {
 			hw_ptr_error(substream, 
 				     "Unexpected hw_pointer value [2] "
-				     "(stream=%i, pos=%ld, old_ptr=%ld)\n",
+				     "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n",
 				     substream->stream, (long)pos,
-				     (long)old_hw_ptr);
+				     (long)old_hw_ptr, jdelta);
 			return 0;
 		}
 		hw_base += runtime->buffer_size;
@@ -301,12 +329,13 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 			hw_base = 0;
 		new_hw_ptr = hw_base + pos;
 	}
-	if (delta > runtime->period_size && runtime->periods > 1) {
+	if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		hw_ptr_error(substream,
 			     "hw_ptr skipping! "
-			     "(pos=%ld, delta=%ld, period=%ld)\n",
+			     "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
 			     (long)pos, (long)delta,
-			     (long)runtime->period_size);
+			     (long)runtime->period_size, jdelta,
+			     ((delta * HZ) / runtime->rate));
 		return 0;
 	}
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
@@ -315,6 +344,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
+	runtime->hw_ptr_jiffies = jiffies;
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -1441,6 +1471,7 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream,
 		runtime->status->hw_ptr %= runtime->buffer_size;
 	else
 		runtime->status->hw_ptr = 0;
+	runtime->hw_ptr_jiffies = jiffies;
 	snd_pcm_stream_unlock_irqrestore(substream, flags);
 	return 0;
 }
-- 
GitLab


From 43a432b1559798d33970261f710030f787770231 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu, 9 Apr 2009 14:26:47 -0700
Subject: [PATCH 0066/1421] x86, CPA: Change idmap attribute before ioremap
 attribute setup

Change the identity mapping with the requested attribute first, before
we setup the virtual memory mapping with the new requested attribute.

This makes sure that there is no window when identity map'ed attribute
may disagree with ioremap range on the attribute type.

This also avoids doing cpa on the ioremap'ed address twice (first in
ioremap_page_range and then in ioremap_change_attr using vaddr), and
should improve ioremap performance a bit.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20090409212708.373330000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/ioremap.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 0dfa09d69e8..329387eca12 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -280,15 +280,16 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 		return NULL;
 	area->phys_addr = phys_addr;
 	vaddr = (unsigned long) area->addr;
-	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+
+	if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
 		free_memtype(phys_addr, phys_addr + size);
 		free_vm_area(area);
 		return NULL;
 	}
 
-	if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
 		free_memtype(phys_addr, phys_addr + size);
-		vunmap(area->addr);
+		free_vm_area(area);
 		return NULL;
 	}
 
-- 
GitLab


From a5593e0b329a14dea41ea173380dbf1533de2bd2 Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Thu, 9 Apr 2009 14:26:48 -0700
Subject: [PATCH 0067/1421] x86, PAT: Change order of cpa and free in
 set_memory_wb

To be free of aliasing due to races, set_memory_* interfaces should
follow ordering of reserving, changing memtype to UC/WC, changing
memtype back to WB followed by free.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090409212708.512280000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d71e1b636ce..d487eaa17bf 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -1021,15 +1021,19 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
+	int ret = _set_memory_wb(addr, numpages);
 	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
-
-	return _set_memory_wb(addr, numpages);
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_wb);
 
 int set_memory_array_wb(unsigned long *addr, int addrinarray)
 {
 	int i;
+	int ret;
+
+	ret = change_page_attr_clear(addr, addrinarray,
+				      __pgprot(_PAGE_CACHE_MASK), 1);
 
 	for (i = 0; i < addrinarray; i++) {
 		unsigned long start = __pa(addr[i]);
@@ -1042,8 +1046,7 @@ int set_memory_array_wb(unsigned long *addr, int addrinarray)
 		}
 		free_memtype(start, end);
 	}
-	return change_page_attr_clear(addr, addrinarray,
-				      __pgprot(_PAGE_CACHE_MASK), 1);
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_array_wb);
 
-- 
GitLab


From 9fa3ab390abfc8b49fc0dd7c845b0ad224ec429f Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Thu, 9 Apr 2009 14:26:49 -0700
Subject: [PATCH 0068/1421] x86, PAT: Handle faults cleanly in set_memory_ APIs

Handle faults and do proper cleanups in set_memory_*() functions. In
some cases, these functions were not doing proper free on failure paths.

With the changes to tracking memtype of RAM pages in struct page instead
of pat list, we do not need the changes in commits c5e147. This patch
reverts that change.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090409212708.653222000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 113 ++++++++++++++++++++++++-----------------
 1 file changed, 65 insertions(+), 48 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d487eaa17bf..985eef80c55 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -945,52 +945,56 @@ int _set_memory_uc(unsigned long addr, int numpages)
 
 int set_memory_uc(unsigned long addr, int numpages)
 {
+	int ret;
+
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
-			    _PAGE_CACHE_UC_MINUS, NULL))
-		return -EINVAL;
+	ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+			    _PAGE_CACHE_UC_MINUS, NULL);
+	if (ret)
+		goto out_err;
+
+	ret = _set_memory_uc(addr, numpages);
+	if (ret)
+		goto out_free;
+
+	return 0;
 
-	return _set_memory_uc(addr, numpages);
+out_free:
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_uc);
 
 int set_memory_array_uc(unsigned long *addr, int addrinarray)
 {
-	unsigned long start;
-	unsigned long end;
-	int i;
+	int i, j;
+	int ret;
+
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
 	for (i = 0; i < addrinarray; i++) {
-		start = __pa(addr[i]);
-		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
-			goto out;
+		ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
+					_PAGE_CACHE_UC_MINUS, NULL);
+		if (ret)
+			goto out_free;
 	}
 
-	return change_page_attr_set(addr, addrinarray,
+	ret = change_page_attr_set(addr, addrinarray,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 1);
-out:
-	for (i = 0; i < addrinarray; i++) {
-		unsigned long tmp = __pa(addr[i]);
-
-		if (tmp == start)
-			break;
-		for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		free_memtype(tmp, end);
-	}
-	return -EINVAL;
+	if (ret)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	for (j = 0; j < i; j++)
+		free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE);
+
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_array_uc);
 
@@ -1002,14 +1006,26 @@ int _set_memory_wc(unsigned long addr, int numpages)
 
 int set_memory_wc(unsigned long addr, int numpages)
 {
+	int ret;
+
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
-		_PAGE_CACHE_WC, NULL))
-		return -EINVAL;
+	ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+		_PAGE_CACHE_WC, NULL);
+	if (ret)
+		goto out_err;
 
-	return _set_memory_wc(addr, numpages);
+	ret = _set_memory_wc(addr, numpages);
+	if (ret)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_wc);
 
@@ -1021,9 +1037,14 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	int ret = _set_memory_wb(addr, numpages);
+	int ret;
+
+	ret = _set_memory_wb(addr, numpages);
+	if (ret)
+		return ret;
+
 	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(set_memory_wb);
 
@@ -1034,19 +1055,13 @@ int set_memory_array_wb(unsigned long *addr, int addrinarray)
 
 	ret = change_page_attr_clear(addr, addrinarray,
 				      __pgprot(_PAGE_CACHE_MASK), 1);
+	if (ret)
+		return ret;
 
-	for (i = 0; i < addrinarray; i++) {
-		unsigned long start = __pa(addr[i]);
-		unsigned long end;
+	for (i = 0; i < addrinarray; i++)
+		free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE);
 
-		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		free_memtype(start, end);
-	}
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(set_memory_array_wb);
 
@@ -1139,6 +1154,8 @@ int set_pages_array_wb(struct page **pages, int addrinarray)
 
 	retval = cpa_clear_pages_array(pages, addrinarray,
 			__pgprot(_PAGE_CACHE_MASK));
+	if (retval)
+		return retval;
 
 	for (i = 0; i < addrinarray; i++) {
 		start = (unsigned long)page_address(pages[i]);
@@ -1146,7 +1163,7 @@ int set_pages_array_wb(struct page **pages, int addrinarray)
 		free_memtype(start, end);
 	}
 
-	return retval;
+	return 0;
 }
 EXPORT_SYMBOL(set_pages_array_wb);
 
-- 
GitLab


From 3869c4aa18835c8c61b44bd0f3ace36e9d3b5bd0 Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Thu, 9 Apr 2009 14:26:50 -0700
Subject: [PATCH 0069/1421] x86, PAT: Changing memtype to WC ensuring no WB
 alias

As per SDM, there should not be any aliasing of a WC with any cacheable
type across CPUs. That is if one CPU is changing the identity map
memtype to _WC, no other CPU at the time of this change should not have a
TLB for this page that carries a WB attribute. SDM suggests to make the
page not present. But for that we will have to handle any page faults
that can potentially happen due to these pages being not present.

Other way to deal with this without having any WB mapping is to change
the page first to UC and then to WC. This ensures that we meet the SDM
requirement of no cacheable alais to WC page. This also has same or
lower overhead than marking the page not present and making it present
later.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090409212708.797481000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 985eef80c55..797f9f107cb 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -1000,8 +1000,15 @@ EXPORT_SYMBOL(set_memory_array_uc);
 
 int _set_memory_wc(unsigned long addr, int numpages)
 {
-	return change_page_attr_set(&addr, numpages,
+	int ret;
+	ret = change_page_attr_set(&addr, numpages,
+				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
+
+	if (!ret) {
+		ret = change_page_attr_set(&addr, numpages,
 				    __pgprot(_PAGE_CACHE_WC), 0);
+	}
+	return ret;
 }
 
 int set_memory_wc(unsigned long addr, int numpages)
-- 
GitLab


From b6ff32d9aaeeeecf98f9a852d715569183585312 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu, 9 Apr 2009 14:26:51 -0700
Subject: [PATCH 0070/1421] x86, PAT: Consolidate code in pat_x_mtrr_type() and
 reserve_memtype()

Fix pat_x_mtrr_type() to use UC_MINUS when the mtrr type return UC. This
is to be  consistent with ioremap() and ioremap_nocache() which uses
UC_MINUS.

Consolidate the code such that reserve_memtype() also uses
pat_x_mtrr_type() when the caller doesn't specify any special attribute
(non WB attribute).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20090409212708.939936000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/ioremap.c |  3 ++-
 arch/x86/mm/pat.c     | 35 +++++++++++++----------------------
 2 files changed, 15 insertions(+), 23 deletions(-)

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 329387eca12..d4c4b2c4dbb 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -375,7 +375,8 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+	err = reserve_memtype(phys_addr, phys_addr + size,
+				_PAGE_CACHE_WB, &flags);
 	if (err < 0)
 		return NULL;
 
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 640339ee4fb..8d3de958050 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -182,10 +182,10 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type)
 		u8 mtrr_type;
 
 		mtrr_type = mtrr_type_lookup(start, end);
-		if (mtrr_type == MTRR_TYPE_UNCACHABLE)
-			return _PAGE_CACHE_UC;
-		if (mtrr_type == MTRR_TYPE_WRCOMB)
-			return _PAGE_CACHE_WC;
+		if (mtrr_type != MTRR_TYPE_WRBACK)
+			return _PAGE_CACHE_UC_MINUS;
+
+		return _PAGE_CACHE_WB;
 	}
 
 	return req_type;
@@ -352,23 +352,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return 0;
 	}
 
-	if (req_type == -1) {
-		/*
-		 * Call mtrr_lookup to get the type hint. This is an
-		 * optimization for /dev/mem mmap'ers into WB memory (BIOS
-		 * tools and ACPI tools). Use WB request for WB memory and use
-		 * UC_MINUS otherwise.
-		 */
-		u8 mtrr_type = mtrr_type_lookup(start, end);
-
-		if (mtrr_type == MTRR_TYPE_WRBACK)
-			actual_type = _PAGE_CACHE_WB;
-		else
-			actual_type = _PAGE_CACHE_UC_MINUS;
-	} else {
-		actual_type = pat_x_mtrr_type(start, end,
-					      req_type & _PAGE_CACHE_MASK);
-	}
+	/*
+	 * Call mtrr_lookup to get the type hint. This is an
+	 * optimization for /dev/mem mmap'ers into WB memory (BIOS
+	 * tools and ACPI tools). Use WB request for WB memory and use
+	 * UC_MINUS otherwise.
+	 */
+	actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK);
 
 	if (new_type)
 		*new_type = actual_type;
@@ -587,7 +577,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	if (flags != -1) {
 		retval = reserve_memtype(offset, offset + size, flags, NULL);
 	} else {
-		retval = reserve_memtype(offset, offset + size, -1, &flags);
+		retval = reserve_memtype(offset, offset + size,
+					_PAGE_CACHE_WB, &flags);
 	}
 
 	if (retval < 0)
-- 
GitLab


From 0c3c8a18361a636069f5a5d9d0d0f9c2124e6b94 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu, 9 Apr 2009 14:26:52 -0700
Subject: [PATCH 0071/1421] x86, PAT: Remove duplicate memtype reserve in
 devmem mmap

/dev/mem mmap code was doing memtype reserve/free for a while now.
Recently we added memtype tracking in remap_pfn_range, and /dev/mem mmap
uses it indirectly. So, we don't need seperate tracking in /dev/mem code
any more. That means another ~100 lines of code removed :-).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20090409212709.085210000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pat.h |  4 ---
 arch/x86/mm/pat.c          | 60 ++------------------------------------
 drivers/char/mem.c         | 27 -----------------
 3 files changed, 2 insertions(+), 89 deletions(-)

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 2cd07b9422f..7af14e512f9 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -18,9 +18,5 @@ extern int free_memtype(u64 start, u64 end);
 
 extern int kernel_map_sync_memtype(u64 base, unsigned long size,
 		unsigned long flag);
-extern void map_devmem(unsigned long pfn, unsigned long size,
-		       struct pgprot vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
-			 struct pgprot vma_prot);
 
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 8d3de958050..cc5e0e24e44 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -536,9 +536,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
-	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = -1;
-	int retval;
+	unsigned long flags = _PAGE_CACHE_WB;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
@@ -566,65 +564,11 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	}
 #endif
 
-	/*
-	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
-	 *
-	 * Without O_SYNC, we want to get
-	 * - WB for WB-able memory and no other conflicting mappings
-	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
-	 * - Inherit from confliting mappings otherwise
-	 */
-	if (flags != -1) {
-		retval = reserve_memtype(offset, offset + size, flags, NULL);
-	} else {
-		retval = reserve_memtype(offset, offset + size,
-					_PAGE_CACHE_WB, &flags);
-	}
-
-	if (retval < 0)
-		return 0;
-
-	if (((pfn < max_low_pfn_mapped) ||
-	     (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
-	    ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
-		free_memtype(offset, offset + size);
-		printk(KERN_INFO
-		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
-			current->comm, current->pid,
-			cattr_name(flags),
-			offset, (unsigned long long)(offset + size));
-		return 0;
-	}
-
 	*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
 			     flags);
 	return 1;
 }
 
-void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
-	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
-	u64 addr = (u64)pfn << PAGE_SHIFT;
-	unsigned long flags;
-
-	reserve_memtype(addr, addr + size, want_flags, &flags);
-	if (flags != want_flags) {
-		printk(KERN_INFO
-		"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
-			current->comm, current->pid,
-			cattr_name(want_flags),
-			addr, (unsigned long long)(addr + size),
-			cattr_name(flags));
-	}
-}
-
-void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
-	u64 addr = (u64)pfn << PAGE_SHIFT;
-
-	free_memtype(addr, addr + size);
-}
-
 /*
  * Change the memory type for the physial address range in kernel identity
  * mapping space if that range is a part of identity map.
@@ -662,8 +606,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 {
 	int is_ram = 0;
 	int ret;
-	unsigned long flags;
 	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+	unsigned long flags = want_flags;
 
 	is_ram = pat_pagerange_is_ram(paddr, paddr + size);
 
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 3586b3b3df3..8f05c38c2f0 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -301,33 +301,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma)
 }
 #endif
 
-void __attribute__((weak))
-map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
-	/* nothing. architectures can override. */
-}
-
-void __attribute__((weak))
-unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
-	/* nothing. architectures can override. */
-}
-
-static void mmap_mem_open(struct vm_area_struct *vma)
-{
-	map_devmem(vma->vm_pgoff,  vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
-}
-
-static void mmap_mem_close(struct vm_area_struct *vma)
-{
-	unmap_devmem(vma->vm_pgoff,  vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
-}
-
 static struct vm_operations_struct mmap_mem_ops = {
-	.open  = mmap_mem_open,
-	.close = mmap_mem_close,
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 	.access = generic_access_phys
 #endif
@@ -362,7 +336,6 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 			    vma->vm_pgoff,
 			    size,
 			    vma->vm_page_prot)) {
-		unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
 		return -EAGAIN;
 	}
 	return 0;
-- 
GitLab


From 1bc571853381b81514cfc815b07a5cc2be4c86d2 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 10 Apr 2009 13:35:28 -0700
Subject: [PATCH 0072/1421] sh: urquell: Fix up address mapping in board
 comments.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-urquell.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index f217f355362..beb88c4da2c 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -23,26 +23,29 @@
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
 
-/* SWx  8765 4321
+/*
+ * bit  1234 5678
  *----------------------------
- * SW1  1101 0010  -> Pck 66MHz version
- *     (0101 0010)    Pck 33MHz version (check CS1BCR)
- * SW2  xxxx x1x0  -> little endian
+ * SW1  0101 0010  -> Pck 33MHz version
+ *     (1101 0010)    Pck 66MHz version
+ * SW2  0x1x xxxx  -> little endian
  *                    29bit mode
- * SW47 0001 1000  -> CS0 : nor flash
+ * SW47 0001 1000  -> CS0 : on-board flash
  *                    CS1 : SRAM, registers, LAN, PCMCIA
- *                    38400 bps
+ *                    38400 bps for SCIF1
  *
  * Address
- * 0x00000000     Nor Flash
- * 0x04000000     SRAM
- * 0x05000000     FPGA register
- * 0x05800000     LAN91C111
- * 0x06000000     PCMCIA
- * 0x10000000     PCIe
- * 0x14000000     LRAM/URAM
- * 0x18000000     ATA/NAND-Flash
- * 0x1C000000     SH7786 Control register
+ * 0x00000000 - 0x04000000  (CS0)     Nor Flash
+ * 0x04000000 - 0x04200000  (CS1)     SRAM
+ * 0x05000000 - 0x05800000  (CS1)     on board register
+ * 0x05800000 - 0x06000000  (CS1)     LAN91C111
+ * 0x06000000 - 0x06400000  (CS1)     PCMCIA
+ * 0x08000000 - 0x10000000  (CS2-CS3) DDR3
+ * 0x10000000 - 0x14000000  (CS4)     PCIe
+ * 0x14000000 - 0x14800000  (CS5)     Core0 LRAM/URAM
+ * 0x14800000 - 0x15000000  (CS5)     Core1 LRAM/URAM
+ * 0x18000000 - 0x1C000000  (CS6)     ATA/NAND-Flash
+ * 0x1C000000 -             (CS7)     SH7786 Control register
  */
 
 /* HeartBeat */
-- 
GitLab


From 3cc000b58360d8df402e31277c3dc0ebe34ad110 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Apr 2009 08:39:27 +0900
Subject: [PATCH 0073/1421] sh: Plug in support for ARCH=sh64 using sh SRCARCH.

This adds in support for building with ARCH=sh64 using the sh SRCARCH.
This tidies up the randconfig generation somewhat to make sure that we
don't end up with impossible configurations, and without having to rely
on things like KCONFIG_ALLCONFIG to detect the proper CPU support subset.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 Makefile        |  7 ++++++-
 arch/sh/Kconfig | 17 +++++++++++++++--
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/Makefile b/Makefile
index c6307b6d069..59b60d5562d 100644
--- a/Makefile
+++ b/Makefile
@@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh.*/sh/ )
+				  -e s/sh[234].*/sh/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------
@@ -210,6 +210,11 @@ ifeq ($(ARCH),sparc64)
        SRCARCH := sparc
 endif
 
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
+
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 45f4a322ce4..e7390dd0283 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -22,7 +22,7 @@ config SUPERH
 	  <http://www.linux-sh.org/>.
 
 config SUPERH32
-	def_bool !SUPERH64
+	def_bool ARCH = "sh"
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_FUNCTION_TRACER
@@ -32,7 +32,7 @@ config SUPERH32
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
 config SUPERH64
-	def_bool y if CPU_SH5
+	def_bool ARCH = "sh64"
 
 config ARCH_DEFCONFIG
 	string
@@ -188,6 +188,8 @@ config ARCH_SHMOBILE
 	bool
 	select ARCH_SUSPEND_POSSIBLE
 
+if SUPERH32
+
 choice
 	prompt "Processor sub-type selection"
 
@@ -409,6 +411,15 @@ config CPU_SUBTYPE_SH7366
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_CMT
 
+endchoice
+
+endif
+
+if SUPERH64
+
+choice
+	prompt "Processor sub-type selection"
+
 # SH-5 Processor Support
 
 config CPU_SUBTYPE_SH5_101
@@ -421,6 +432,8 @@ config CPU_SUBTYPE_SH5_103
 
 endchoice
 
+endif
+
 source "arch/sh/mm/Kconfig"
  
 source "arch/sh/Kconfig.cpu"
-- 
GitLab


From 50a4da890102a455e5cd3dd358c38650d07178d3 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 8 Apr 2009 15:39:38 +0000
Subject: [PATCH 0074/1421] ACPI: button: whitespace changes

This patch changes a bit of whitespace to follow Linux conventions.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index d73c94b8441..52eb06ea4f8 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -1,5 +1,5 @@
 /*
- *  acpi_button.c - ACPI Button Driver ($Revision: 30 $)
+ *  button.c - ACPI Button Driver
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -133,7 +133,6 @@ static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
 
 	seq_printf(seq, "type:                    %s\n",
 		   acpi_device_name(button->device));
-
 	return 0;
 }
 
@@ -259,6 +258,7 @@ static int acpi_lid_send_state(struct acpi_button *button)
 					&state);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
+
 	/* input layer checks if event is redundant */
 	input_report_switch(button->input, SW_LID, !state);
 	input_sync(button->input);
@@ -299,13 +299,12 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 				  "Unsupported event [0x%x]\n", event));
 		break;
 	}
-
-	return;
 }
 
 static int acpi_button_resume(struct acpi_device *device)
 {
 	struct acpi_button *button;
+
 	if (!device)
 		return -EINVAL;
 	button = acpi_driver_data(device);
@@ -424,7 +423,6 @@ static int acpi_button_add(struct acpi_device *device)
 
 	printk(KERN_INFO PREFIX "%s [%s]\n",
 	       acpi_device_name(device), acpi_device_bid(device));
-
 	return 0;
 
  err_remove_fs:
@@ -448,7 +446,6 @@ static int acpi_button_remove(struct acpi_device *device, int type)
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
-
 	return 0;
 }
 
@@ -459,6 +456,7 @@ static int __init acpi_button_init(void)
 	acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
 	if (!acpi_button_dir)
 		return -ENODEV;
+
 	result = acpi_bus_register_driver(&acpi_button_driver);
 	if (result < 0) {
 		remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
-- 
GitLab


From e2fb9754d27513918a4936e8cbaad50ff56cfd3d Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 8 Apr 2009 15:39:43 +0000
Subject: [PATCH 0075/1421] ACPI: button: remove unnecessary null pointer
 checks

Better to oops and learn about a bug than to silently cover it up.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c | 22 +---------------------
 1 file changed, 1 insertion(+), 21 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 52eb06ea4f8..c4632366226 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -128,9 +128,6 @@ static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
 {
 	struct acpi_button *button = seq->private;
 
-	if (!button || !button->device)
-		return 0;
-
 	seq_printf(seq, "type:                    %s\n",
 		   acpi_device_name(button->device));
 	return 0;
@@ -147,9 +144,6 @@ static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
 	acpi_status status;
 	unsigned long long state;
 
-	if (!button || !button->device)
-		return 0;
-
 	status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
 	seq_printf(seq, "state:      %s\n",
 		   ACPI_FAILURE(status) ? "unsupported" :
@@ -171,9 +165,6 @@ static int acpi_button_add_fs(struct acpi_device *device)
 	struct proc_dir_entry *entry = NULL;
 	struct acpi_button *button;
 
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
 	button = acpi_driver_data(device);
 
 	switch (button->type) {
@@ -270,9 +261,6 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	struct acpi_button *button = acpi_driver_data(device);
 	struct input_dev *input;
 
-	if (!button || !button->device)
-		return;
-
 	switch (event) {
 	case ACPI_FIXED_HARDWARE_EVENT:
 		event = ACPI_BUTTON_NOTIFY_STATUS;
@@ -305,10 +293,8 @@ static int acpi_button_resume(struct acpi_device *device)
 {
 	struct acpi_button *button;
 
-	if (!device)
-		return -EINVAL;
 	button = acpi_driver_data(device);
-	if (button && button->type == ACPI_BUTTON_TYPE_LID)
+	if (button->type == ACPI_BUTTON_TYPE_LID)
 		return acpi_lid_send_state(button);
 	return 0;
 }
@@ -319,9 +305,6 @@ static int acpi_button_add(struct acpi_device *device)
 	struct acpi_button *button;
 	struct input_dev *input;
 
-	if (!device)
-		return -EINVAL;
-
 	button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
 	if (!button)
 		return -ENOMEM;
@@ -438,9 +421,6 @@ static int acpi_button_remove(struct acpi_device *device, int type)
 {
 	struct acpi_button *button;
 
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
 	button = acpi_driver_data(device);
 
 	acpi_button_remove_fs(device);
-- 
GitLab


From 1bce81131c71064bc3163078f24545b839a31967 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 8 Apr 2009 15:39:49 +0000
Subject: [PATCH 0076/1421] ACPI: button: use Linux style for getting
 driver_data

It's typical and slightly more compact to look up the driver_data
structure by initializing the automatic variable at its definition.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index c4632366226..8ef8f443f53 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -162,10 +162,8 @@ static struct proc_dir_entry *acpi_lid_dir;
 
 static int acpi_button_add_fs(struct acpi_device *device)
 {
+	struct acpi_button *button = acpi_driver_data(device);
 	struct proc_dir_entry *entry = NULL;
-	struct acpi_button *button;
-
-	button = acpi_driver_data(device);
 
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWER:
@@ -291,9 +289,8 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 
 static int acpi_button_resume(struct acpi_device *device)
 {
-	struct acpi_button *button;
+	struct acpi_button *button = acpi_driver_data(device);
 
-	button = acpi_driver_data(device);
 	if (button->type == ACPI_BUTTON_TYPE_LID)
 		return acpi_lid_send_state(button);
 	return 0;
@@ -301,9 +298,9 @@ static int acpi_button_resume(struct acpi_device *device)
 
 static int acpi_button_add(struct acpi_device *device)
 {
-	int error;
 	struct acpi_button *button;
 	struct input_dev *input;
+	int error;
 
 	button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
 	if (!button)
@@ -419,9 +416,7 @@ static int acpi_button_add(struct acpi_device *device)
 
 static int acpi_button_remove(struct acpi_device *device, int type)
 {
-	struct acpi_button *button;
-
-	button = acpi_driver_data(device);
+	struct acpi_button *button = acpi_driver_data(device);
 
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
-- 
GitLab


From bf04a77227db76f163bc2355ef4e176794987be2 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 8 Apr 2009 15:39:54 +0000
Subject: [PATCH 0077/1421] ACPI: button: cache hid/name/class pointers

This patch adds temporaries to cache the acpi_device_hid(),
acpi_device_name(), and acpi_device_class() pointers so we
don't have to clutter the code with so many uses of those
interfaces.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c | 48 +++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 8ef8f443f53..9f6d2e6844a 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -300,6 +300,7 @@ static int acpi_button_add(struct acpi_device *device)
 {
 	struct acpi_button *button;
 	struct input_dev *input;
+	char *hid, *name, *class;
 	int error;
 
 	button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
@@ -315,40 +316,41 @@ static int acpi_button_add(struct acpi_device *device)
 		goto err_free_button;
 	}
 
+	hid = acpi_device_hid(device);
+	name = acpi_device_name(device);
+	class = acpi_device_class(device);
+
 	/*
 	 * Determine the button type (via hid), as fixed-feature buttons
 	 * need to be handled a bit differently than generic-space.
 	 */
-	if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+	if (!strcmp(hid, ACPI_BUTTON_HID_POWER)) {
 		button->type = ACPI_BUTTON_TYPE_POWER;
-		strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
 		button->type = ACPI_BUTTON_TYPE_POWERF;
-		strcpy(acpi_device_name(device),
-		       ACPI_BUTTON_DEVICE_NAME_POWERF);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWERF);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP)) {
 		button->type = ACPI_BUTTON_TYPE_SLEEP;
-		strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
 		button->type = ACPI_BUTTON_TYPE_SLEEPF;
-		strcpy(acpi_device_name(device),
-		       ACPI_BUTTON_DEVICE_NAME_SLEEPF);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEPF);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
 		button->type = ACPI_BUTTON_TYPE_LID;
-		strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 	} else {
-		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
-			    acpi_device_hid(device));
+		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
 		goto err_free_input;
 	}
@@ -357,10 +359,9 @@ static int acpi_button_add(struct acpi_device *device)
 	if (error)
 		goto err_free_input;
 
-	snprintf(button->phys, sizeof(button->phys),
-		 "%s/button/input0", acpi_device_hid(device));
+	snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
 
-	input->name = acpi_device_name(device);
+	input->name = name;
 	input->phys = button->phys;
 	input->id.bustype = BUS_HOST;
 	input->id.product = button->type;
@@ -401,8 +402,7 @@ static int acpi_button_add(struct acpi_device *device)
 		device->wakeup.state.enabled = 1;
 	}
 
-	printk(KERN_INFO PREFIX "%s [%s]\n",
-	       acpi_device_name(device), acpi_device_bid(device));
+	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
 	return 0;
 
  err_remove_fs:
-- 
GitLab


From 106c19e7b978e1b84ea5cabbd470a0ddced577c8 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 8 Apr 2009 15:39:59 +0000
Subject: [PATCH 0078/1421] ACPI: button: remove button->device pointer

We no longer need a pointer from struct acpi_button back to the
struct acpi_device.  Everywhere we used that pointer, we either
already have, or can easily get, the acpi_device pointer without
using the copy from acpi_button.  So this patch removes the
structure element.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 9f6d2e6844a..c8441627f68 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -95,7 +95,6 @@ static struct acpi_driver acpi_button_driver = {
 };
 
 struct acpi_button {
-	struct acpi_device *device;	/* Fixed button kludge */
 	unsigned int type;
 	struct input_dev *input;
 	char phys[32];			/* for input device */
@@ -126,10 +125,10 @@ static struct proc_dir_entry *acpi_button_dir;
 
 static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
 {
-	struct acpi_button *button = seq->private;
+	struct acpi_device *device = seq->private;
 
 	seq_printf(seq, "type:                    %s\n",
-		   acpi_device_name(button->device));
+		   acpi_device_name(device));
 	return 0;
 }
 
@@ -140,11 +139,11 @@ static int acpi_button_info_open_fs(struct inode *inode, struct file *file)
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
 {
-	struct acpi_button *button = seq->private;
+	struct acpi_device *device = seq->private;
 	acpi_status status;
 	unsigned long long state;
 
-	status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
+	status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
 	seq_printf(seq, "state:      %s\n",
 		   ACPI_FAILURE(status) ? "unsupported" :
 			(state ? "open" : "closed"));
@@ -198,8 +197,7 @@ static int acpi_button_add_fs(struct acpi_device *device)
 	/* 'info' [R] */
 	entry = proc_create_data(ACPI_BUTTON_FILE_INFO,
 				 S_IRUGO, acpi_device_dir(device),
-				 &acpi_button_info_fops,
-				 acpi_driver_data(device));
+				 &acpi_button_info_fops, device);
 	if (!entry)
 		return -ENODEV;
 
@@ -207,8 +205,7 @@ static int acpi_button_add_fs(struct acpi_device *device)
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
 		entry = proc_create_data(ACPI_BUTTON_FILE_STATE,
 					 S_IRUGO, acpi_device_dir(device),
-					 &acpi_button_state_fops,
-					 acpi_driver_data(device));
+					 &acpi_button_state_fops, device);
 		if (!entry)
 			return -ENODEV;
 	}
@@ -238,13 +235,13 @@ static int acpi_button_remove_fs(struct acpi_device *device)
 /* --------------------------------------------------------------------------
                                 Driver Interface
    -------------------------------------------------------------------------- */
-static int acpi_lid_send_state(struct acpi_button *button)
+static int acpi_lid_send_state(struct acpi_device *device)
 {
+	struct acpi_button *button = acpi_driver_data(device);
 	unsigned long long state;
 	acpi_status status;
 
-	status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
-					&state);
+	status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
@@ -266,7 +263,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_send_state(button);
+			acpi_lid_send_state(device);
 		} else {
 			int keycode = test_bit(KEY_SLEEP, input->keybit) ?
 						KEY_SLEEP : KEY_POWER;
@@ -277,8 +274,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
 			input_sync(input);
 		}
 
-		acpi_bus_generate_proc_event(button->device, event,
-					++button->pushed);
+		acpi_bus_generate_proc_event(device, event, ++button->pushed);
 		break;
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -292,7 +288,7 @@ static int acpi_button_resume(struct acpi_device *device)
 	struct acpi_button *button = acpi_driver_data(device);
 
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		return acpi_lid_send_state(button);
+		return acpi_lid_send_state(device);
 	return 0;
 }
 
@@ -307,7 +303,6 @@ static int acpi_button_add(struct acpi_device *device)
 	if (!button)
 		return -ENOMEM;
 
-	button->device = device;
 	device->driver_data = button;
 
 	button->input = input = input_allocate_device();
@@ -390,7 +385,7 @@ static int acpi_button_add(struct acpi_device *device)
 	if (error)
 		goto err_remove_fs;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		acpi_lid_send_state(button);
+		acpi_lid_send_state(device);
 
 	if (device->wakeup.flags.valid) {
 		/* Button's GPE is run-wake GPE */
-- 
GitLab


From d68b597c883cf863c7216564cae08a4730d56cc1 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Wed, 8 Apr 2009 15:40:04 +0000
Subject: [PATCH 0079/1421] ACPI: button: remove control method/fixed hardware
 distinctions

This patch removes the driver distinction between control method (CM)
and fixed hardware (FF) buttons.  We previously needed that so we
could install either a fixed event handler or a notify handler, but
the Linux/ACPI code now handles that for us, so we don't need to
worry about it.

Note that this removes the FF/CM annotation from the "info" files
in /proc.  For example,

    /proc/acpi/button/PWRF/info:
    -type:		Power Button (FF)
    +type:		Power Button

I don't think there's anything meaningful user-space can do by
knowing whether a button is a control method or a fixed hardware
button, so nobody should be looking at the FF/CM.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/button.c | 32 ++++++--------------------------
 1 file changed, 6 insertions(+), 26 deletions(-)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index c8441627f68..9195deba9d9 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -41,17 +41,13 @@
 
 #define ACPI_BUTTON_SUBCLASS_POWER	"power"
 #define ACPI_BUTTON_HID_POWER		"PNP0C0C"
-#define ACPI_BUTTON_DEVICE_NAME_POWER	"Power Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF	"Power Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_POWER	"Power Button"
 #define ACPI_BUTTON_TYPE_POWER		0x01
-#define ACPI_BUTTON_TYPE_POWERF		0x02
 
 #define ACPI_BUTTON_SUBCLASS_SLEEP	"sleep"
 #define ACPI_BUTTON_HID_SLEEP		"PNP0C0E"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP	"Sleep Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF	"Sleep Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP	"Sleep Button"
 #define ACPI_BUTTON_TYPE_SLEEP		0x03
-#define ACPI_BUTTON_TYPE_SLEEPF		0x04
 
 #define ACPI_BUTTON_SUBCLASS_LID	"lid"
 #define ACPI_BUTTON_HID_LID		"PNP0C0D"
@@ -166,14 +162,12 @@ static int acpi_button_add_fs(struct acpi_device *device)
 
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWER:
-	case ACPI_BUTTON_TYPE_POWERF:
 		if (!acpi_power_dir)
 			acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER,
 						    acpi_button_dir);
 		entry = acpi_power_dir;
 		break;
 	case ACPI_BUTTON_TYPE_SLEEP:
-	case ACPI_BUTTON_TYPE_SLEEPF:
 		if (!acpi_sleep_dir)
 			acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP,
 						    acpi_button_dir);
@@ -315,30 +309,18 @@ static int acpi_button_add(struct acpi_device *device)
 	name = acpi_device_name(device);
 	class = acpi_device_class(device);
 
-	/*
-	 * Determine the button type (via hid), as fixed-feature buttons
-	 * need to be handled a bit differently than generic-space.
-	 */
-	if (!strcmp(hid, ACPI_BUTTON_HID_POWER)) {
+	if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
+	    !strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
 		button->type = ACPI_BUTTON_TYPE_POWER;
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
-	} else if (!strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
-		button->type = ACPI_BUTTON_TYPE_POWERF;
-		strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWERF);
-		sprintf(class, "%s/%s",
-			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
-	} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
+		   !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
 		button->type = ACPI_BUTTON_TYPE_SLEEP;
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
-	} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
-		button->type = ACPI_BUTTON_TYPE_SLEEPF;
-		strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEPF);
-		sprintf(class, "%s/%s",
-			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
 	} else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
 		button->type = ACPI_BUTTON_TYPE_LID;
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
@@ -364,13 +346,11 @@ static int acpi_button_add(struct acpi_device *device)
 
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWER:
-	case ACPI_BUTTON_TYPE_POWERF:
 		input->evbit[0] = BIT_MASK(EV_KEY);
 		set_bit(KEY_POWER, input->keybit);
 		break;
 
 	case ACPI_BUTTON_TYPE_SLEEP:
-	case ACPI_BUTTON_TYPE_SLEEPF:
 		input->evbit[0] = BIT_MASK(EV_KEY);
 		set_bit(KEY_SLEEP, input->keybit);
 		break;
-- 
GitLab


From 82babbb3887e234c995626e4121d411ea9070ca5 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Wed, 8 Apr 2009 09:44:29 +0800
Subject: [PATCH 0080/1421] ACPI: Revert conflicting workaround for BIOS w/
 mangled PRT entries

2f894ef9c8b36a35d80709bedca276d2fc691941
in Linux-2.6.21 worked around BIOS with mangled _PRT entries:
http://bugzilla.kernel.org/show_bug.cgi?id=6859

d0e184abc5983281ef189db2c759d65d56eb1b80
worked around the same issue via ACPICA, and shipped in 2.6.27.

Unfortunately the two workarounds conflict:
http://bugzilla.kernel.org/show_bug.cgi?id=12270

So revert the Linux specific one.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/rscreate.c | 27 ++-------------------------
 1 file changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 663f692fffc..a3c23d686d5 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -191,8 +191,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
 	user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
 
 	for (index = 0; index < number_of_elements; index++) {
-		int source_name_index = 2;
-		int source_index_index = 3;
 
 		/*
 		 * Point user_prt past this current structure
@@ -261,27 +259,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
 			return_ACPI_STATUS(AE_BAD_DATA);
 		}
 
-		/*
-		 * If BIOS erroneously reversed the _PRT source_name and source_index,
-		 * then reverse them back.
-		 */
-		if ((sub_object_list[3])->common.type !=
-		    ACPI_TYPE_INTEGER) {
-			if (acpi_gbl_enable_interpreter_slack) {
-				source_name_index = 3;
-				source_index_index = 2;
-				printk(KERN_WARNING
-				       "ACPI: Handling Garbled _PRT entry\n");
-			} else {
-				ACPI_ERROR((AE_INFO,
-					    "(PRT[%X].source_index) Need Integer, found %s",
-					    index,
-					    acpi_ut_get_object_type_name
-					    (sub_object_list[3])));
-				return_ACPI_STATUS(AE_BAD_DATA);
-			}
-		}
-
 		user_prt->pin = (u32) obj_desc->integer.value;
 
 		/*
@@ -304,7 +281,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
 		 * 3) Third subobject: Dereference the PRT.source_name
 		 * The name may be unresolved (slack mode), so allow a null object
 		 */
-		obj_desc = sub_object_list[source_name_index];
+		obj_desc = sub_object_list[2];
 		if (obj_desc) {
 			switch (obj_desc->common.type) {
 			case ACPI_TYPE_LOCAL_REFERENCE:
@@ -378,7 +355,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
 
 		/* 4) Fourth subobject: Dereference the PRT.source_index */
 
-		obj_desc = sub_object_list[source_index_index];
+		obj_desc = sub_object_list[3];
 		if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
 			ACPI_ERROR((AE_INFO,
 				    "(PRT[%X].SourceIndex) Need Integer, found %s",
-- 
GitLab


From e047cca66c6bb0b1c346e91305011aab79dfc4b0 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Thu, 9 Apr 2009 14:24:35 +0800
Subject: [PATCH 0081/1421] ACPI video: handle indexed _BQC correctly
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In the current code, for a box with an indexed _BQC method, we
1. get the current brightness level by evaluating _BQC
2. set the value gotten in step 1 to _BCM
3. get the current brightness level again
4. set the _BQC_use_index flag if the results gotten
   in step 1 and in step 3 don't equal.

But this logic doesn't work actually, because the _BQC_use_index
is not set when acpi_video_device_lcd_set_level is invoked.
This results in a failure in step 2.
http://bugzilla.kernel.org/show_bug.cgi?id=12249#c83

Now, we set the _BQC_use_index flag after invoking _BQC for the first
time. And reevaluate the _BQC to get the correct brightness level.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb7543a9..346277f93cd 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -807,12 +807,19 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	br->flags._BCM_use_index = br->flags._BCL_use_index;
 
 	/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
-	br->curr = max_level;
+	br->curr = level_old = max_level;
+
+	if (!device->cap._BQC)
+		goto set_level;
+
 	result = acpi_video_device_lcd_get_level_current(device, &level_old);
 	if (result)
 		goto out_free_levels;
 
-	result = acpi_video_device_lcd_set_level(device, br->curr);
+	/*
+	 * Set the level to maximum and check if _BQC uses indexed value
+	 */
+	result = acpi_video_device_lcd_set_level(device, max_level);
 	if (result)
 		goto out_free_levels;
 
@@ -820,25 +827,19 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	if (result)
 		goto out_free_levels;
 
-	if ((level != level_old) && !br->flags._BCM_use_index) {
-		/* Note:
-		 * This piece of code does not work correctly if the current
-		 * brightness levels is 0.
-		 * But I guess boxes that boot with such a dark screen are rare
-		 * and no more code is needed to cover this specifial case.
-		 */
-
-		if (level_ac_battery != 2) {
-			/*
-			 * For now, we don't support the _BCL like this:
-			 * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
-			 * because we may mess up the index returned by _BQC.
-			 * Plus: we have not got a box like this.
-			 */
-			ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
-		}
-		br->flags._BQC_use_index = 1;
-	}
+	br->flags._BQC_use_index = (level == max_level ? 0 : 1);
+
+	if (!br->flags._BQC_use_index)
+		goto set_level;
+
+	if (br->flags._BCL_reversed)
+		level_old = (br->count - 1) - level_old;
+	level_old = br->levels[level_old];
+
+set_level:
+	result = acpi_video_device_lcd_set_level(device, level_old);
+	if (result)
+		goto out_free_levels;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "found %d brightness levels\n", count - 2));
-- 
GitLab


From 5ea2fc6491631d2c3f346dcb0d9d6edd44ccf4cd Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 9 Apr 2009 11:36:50 -0700
Subject: [PATCH 0082/1421] Input: i8042 - introduce a tougher reset

Some touchpads don't reset right the first time (MSI Wind U-100 for
example).  This patch will retry the reset up to 5 times.

In addition, on x86, we don't fail entire i8042 initialization if
controller reset fails in hope that keyboard port will still be
functional and user will still get a working keyboard. This is
especially important on netbooks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042.c | 37 +++++++++++++++++++++++++++++--------
 1 file changed, 29 insertions(+), 8 deletions(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 170f71ee577..3cffb704e37 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -712,22 +712,43 @@ static int i8042_controller_check(void)
 static int i8042_controller_selftest(void)
 {
 	unsigned char param;
+	int i = 0;
 
 	if (!i8042_reset)
 		return 0;
 
-	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-		return -ENODEV;
-	}
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			return -ENODEV;
+		}
+
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
 
-	if (param != I8042_RET_CTL_TEST) {
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			 param, I8042_RET_CTL_TEST);
-		return -EIO;
-	}
+			param, I8042_RET_CTL_TEST);
+		msleep(50);
+	} while (i++ < 5);
 
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	printk(KERN_INFO
+		"i8042: giving up on controller selftest, continuing anyway...\n");
 	return 0;
+#else
+	return -EIO;
+#endif
 }
 
 /*
-- 
GitLab


From 7c46e23681ebca23249806b379125cf72b7435b6 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sat, 11 Apr 2009 16:50:13 -0700
Subject: [PATCH 0083/1421] Input: i8042 - add a DMI table for the i8042.reset
 option

There are several DMI tables in the i8042 (keyboard) driver already, but
not one for the i8042.reset option.  This patch adds such an option.

Two users for this table are added as well, the MSI Wind U-100 and the LG
X110.  The MSI Wind also needs to be in the "don't trust the pnp data" for
the touchpad to work on my machine.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042-x86ia64io.h | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 83ed2d56b92..fb8a3cd3ffd 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	{ }
 };
 
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
+	{
+		.ident = "LG Electronics X110",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X110"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+		},
+	},
+	{ }
+};
+
 #ifdef CONFIG_PNP
 static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 	{
@@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
 	{ }
 };
 #endif
@@ -698,6 +723,9 @@ static int __init i8042_platform_init(void)
 #endif
 
 #ifdef CONFIG_X86
+	if (dmi_check_system(i8042_dmi_reset_table))
+		i8042_reset = 1;
+
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = 1;
 
-- 
GitLab


From b79e83bdd961ec9b862191c0df51aaeb3cb85664 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@infradead.org>
Date: Sat, 11 Apr 2009 16:50:15 -0700
Subject: [PATCH 0084/1421] Input: remove unnecessary synchronize_rcu() call

There is no need to issue serialize_rcu() after adding a new handle
to the list of handles associated with the device because new events
will "see" the new handle in the list immediately. Remove it so we
can boot a little bit faster.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 913392f63f7..a79c83397a9 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1551,7 +1551,6 @@ int input_register_handle(struct input_handle *handle)
 		return error;
 	list_add_tail_rcu(&handle->d_node, &dev->h_list);
 	mutex_unlock(&dev->mutex);
-	synchronize_rcu();
 
 	/*
 	 * Since we are supposed to be called from ->connect()
-- 
GitLab


From fd746d540abf8c686f5f868ae62112692e684088 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Sat, 11 Apr 2009 16:54:59 -0700
Subject: [PATCH 0085/1421] Input: ads7846 - introduce platform specific way to
 synchronize sampling

Noises can be introduced when LCD signals are being driven, some platforms
provide a signal to assist the synchronization of this sampling procedure.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/ads7846.c | 10 ++++++++++
 include/linux/spi/ads7846.h         |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 7c27c8b9b6d..cf7e69766b2 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -127,6 +127,8 @@ struct ads7846 {
 	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
 	int			gpio_pendown;
+
+	void			(*wait_for_sync)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts)
 	return !gpio_get_value(ts->gpio_pendown);
 }
 
+static void null_wait_for_sync(void)
+{
+}
+
 /*
  * PENIRQ only kicks the timer.  The timer only reissues the SPI transfer,
  * to retrieve touchscreen status.
@@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads)
 	default:
 		BUG();
 	}
+	ts->wait_for_sync();
 	status = spi_async(ts->spi, m);
 	if (status)
 		dev_err(&ts->spi->dev, "spi_async --> %d\n",
@@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 	} else {
 		/* pen is still down, continue with the measurement */
 		ts->msg_idx = 0;
+		ts->wait_for_sync();
 		status = spi_async(ts->spi, &ts->msg[0]);
 		if (status)
 			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
@@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
+	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
 
 	input_dev->name = "ADS784x Touchscreen";
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 05eab2f11e6..2ea20320c09 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -51,5 +51,6 @@ struct ads7846_platform_data {
 				 void **filter_data);
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
+	void	(*wait_for_sync)(void);
 };
 
-- 
GitLab


From 4f295232bef43adf648876a0cd950faa99daa5f1 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Sat, 11 Apr 2009 16:50:17 -0700
Subject: [PATCH 0086/1421] Input: wm97xx - don't specify IRQF_SAMPLE_RANDOM

The input core will add entropy to the pool so this flag is not
needed.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/wm97xx-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cec480bffe3..69af8385ab1 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
 	 * provided. */
 	BUG_ON(!wm->mach_ops->irq_enable);
 
-	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
-			IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
 			"wm97xx-pen", wm)) {
 		dev_err(wm->dev,
 			"Failed to register pen down interrupt, polling");
-- 
GitLab


From c306af23e19d3c94c9229263c39fe487e915e774 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Thu, 26 Mar 2009 10:16:57 +0900
Subject: [PATCH 0087/1421] nilfs2: return f_fsid for statfs2

This follows the change of Coly Li's series ("fs: return f_fsid for
statfs(2)"), and make nilfs2 return f_fsid info for statfs(2).

Acked-by: Coly Li <coly.li@suse.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/super.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index e117e1ea9bf..8a965f9523a 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -476,11 +476,12 @@ static int nilfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct super_block *sb = dentry->d_sb;
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
+	struct the_nilfs *nilfs = sbi->s_nilfs;
+	u64 id = huge_encode_dev(sb->s_bdev->bd_dev);
 	unsigned long long blocks;
 	unsigned long overhead;
 	unsigned long nrsvblocks;
 	sector_t nfreeblocks;
-	struct the_nilfs *nilfs = sbi->s_nilfs;
 	int err;
 
 	/*
@@ -514,6 +515,9 @@ static int nilfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = atomic_read(&sbi->s_inodes_count);
 	buf->f_ffree = 0; /* nilfs_count_free_inodes(sb); */
 	buf->f_namelen = NILFS_NAME_LEN;
+	buf->f_fsid.val[0] = (u32)id;
+	buf->f_fsid.val[1] = (u32)(id >> 32);
+
 	return 0;
 }
 
-- 
GitLab


From bcb48891b05b4179edc86298d3dccb2ce90d5413 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Fri, 27 Mar 2009 02:51:39 +0900
Subject: [PATCH 0088/1421] nilfs2: fix lockdep recursive locking warning on
 bmap

The bmap semaphore of DAT file can be held while a bmap of other files
is locked.  This has caused the following false detection of lockdep
check:

mount.nilfs2/4667 is trying to acquire lock:
 (&bmap->b_sem){..--}, at: [<d0c6c4b4>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2]

but task is already holding lock:
 (&bmap->b_sem){..--}, at: [<d0c6c4b4>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2]

This will fix the false detection by distinguishing semaphores of the
DAT and other files.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/bmap.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 24638e059bf..064279e33bb 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -688,6 +688,8 @@ static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_gc = {
 	.bpop_translate		=	NULL,
 };
 
+static struct lock_class_key nilfs_bmap_dat_lock_key;
+
 /**
  * nilfs_bmap_read - read a bmap from an inode
  * @bmap: bmap
@@ -715,6 +717,7 @@ int nilfs_bmap_read(struct nilfs_bmap *bmap, struct nilfs_inode *raw_inode)
 		bmap->b_pops = &nilfs_bmap_ptr_ops_p;
 		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
 		bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT;
+		lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 		break;
 	case NILFS_CPFILE_INO:
 	case NILFS_SUFILE_INO:
@@ -772,6 +775,7 @@ void nilfs_bmap_init_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap)
 {
 	memcpy(gcbmap, bmap, sizeof(union nilfs_bmap_union));
 	init_rwsem(&gcbmap->b_sem);
+	lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 	gcbmap->b_inode = &NILFS_BMAP_I(gcbmap)->vfs_inode;
 }
 
@@ -779,5 +783,6 @@ void nilfs_bmap_commit_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap)
 {
 	memcpy(bmap, gcbmap, sizeof(union nilfs_bmap_union));
 	init_rwsem(&bmap->b_sem);
+	lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 	bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
 }
-- 
GitLab


From c2698e50e304cd29a7836f05452359a3306a405e Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Fri, 27 Mar 2009 02:53:12 +0900
Subject: [PATCH 0089/1421] nilfs2: fix lockdep recursive locking warning on
 meta data files

This fixes the following false detection of lockdep against nilfs meta
data files:

=============================================
[ INFO: possible recursive locking detected ]
2.6.29 #26
---------------------------------------------
mount.nilfs2/4185 is trying to acquire lock:
 (&mi->mi_sem){----}, at: [<d0c7925b>] nilfs_sufile_get_stat+0x1e/0x105 [nilfs2]
 but task is already holding lock:
  (&mi->mi_sem){----}, at: [<d0c72026>] nilfs_count_free_blocks+0x48/0x84 [nilfs2]

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/the_nilfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 33400cf0bbe..7f65b3be4aa 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -115,6 +115,7 @@ void put_nilfs(struct the_nilfs *nilfs)
 static int nilfs_load_super_root(struct the_nilfs *nilfs,
 				 struct nilfs_sb_info *sbi, sector_t sr_block)
 {
+	static struct lock_class_key dat_lock_key;
 	struct buffer_head *bh_sr;
 	struct nilfs_super_root *raw_sr;
 	struct nilfs_super_block **sbp = nilfs->ns_sbp;
@@ -163,6 +164,9 @@ static int nilfs_load_super_root(struct the_nilfs *nilfs,
 	if (unlikely(err))
 		goto failed_sufile;
 
+	lockdep_set_class(&NILFS_MDT(nilfs->ns_dat)->mi_sem, &dat_lock_key);
+	lockdep_set_class(&NILFS_MDT(nilfs->ns_gc_dat)->mi_sem, &dat_lock_key);
+
 	nilfs_mdt_set_shadow(nilfs->ns_dat, nilfs->ns_gc_dat);
 	nilfs_mdt_set_entry_size(nilfs->ns_cpfile, checkpoint_size,
 				 sizeof(struct nilfs_cpfile_header));
-- 
GitLab


From e7a7402c0d392dcadc74cae8922f8fae4667605a Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Fri, 27 Mar 2009 10:49:11 +0900
Subject: [PATCH 0090/1421] nilfs2: remove module version

A MODULE_VERSION() macro has been used in out-of-tree nilfs modules,
but it's needless and not updated in tree.  So, this removes it along
with the version declaration.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/nilfs.h | 5 -----
 fs/nilfs2/super.c | 1 -
 2 files changed, 6 deletions(-)

diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 7558c977db0..3d0c18a16db 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -34,11 +34,6 @@
 #include "bmap.h"
 #include "bmap_union.h"
 
-/*
- * NILFS filesystem version
- */
-#define NILFS_VERSION		"2.0.5"
-
 /*
  * nilfs inode data in memory
  */
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 8a965f9523a..6989b03e97a 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -63,7 +63,6 @@
 MODULE_AUTHOR("NTT Corp.");
 MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem "
 		   "(NILFS)");
-MODULE_VERSION(NILFS_VERSION);
 MODULE_LICENSE("GPL");
 
 static int nilfs_remount(struct super_block *sb, int *flags, char *data);
-- 
GitLab


From 3efb55b496952e0d29a9ec66d0ceaab175c4e8ca Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Mon, 30 Mar 2009 00:50:19 +0900
Subject: [PATCH 0091/1421] nilfs2: simplify handling of active state of
 segments fix

This fixes a bug of ("nilfs2: simplify handling of active state of
segments") patch.  The patch did not take account that a base index is
increased in nilfs_sufile_get_suinfo() function if requested entries
go across block boundary on sufile.

Due to this bug, the active flag sometimes appears on wrong segments
and has induced malfunction of garbage collection.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/sufile.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index c774cf397e2..1ef2b4d9d79 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -625,7 +625,7 @@ ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum,
 			si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks);
 			si[i + j].sui_flags = le32_to_cpu(su->su_flags) &
 				~(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
-			if (nilfs_segment_is_active(nilfs, segnum + i + j))
+			if (nilfs_segment_is_active(nilfs, segnum + j))
 				si[i + j].sui_flags |=
 					(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
 		}
-- 
GitLab


From 88072faf9a32c92f37c15065496bb6eb309aebe3 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Sun, 5 Apr 2009 15:03:16 +0900
Subject: [PATCH 0092/1421] nilfs2: fix wrong accounting and duplicate brelse
 in nilfs_sufile_set_error

The nilfs_sufile_set_error() function wrongly adjusts the number of
dirty segments instead of the number of clean segments.  In addition,
the function calls brelse() twice for the same buffer head.

This fixes these bugs.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/sufile.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index 1ef2b4d9d79..8b2f93ca1e1 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -523,7 +523,7 @@ int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
 	struct nilfs_segment_usage *su;
 	struct nilfs_sufile_header *header;
 	void *kaddr;
-	int ret;
+	int suclean, ret;
 
 	if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
 		printk(KERN_WARNING "%s: invalid segment number: %llu\n",
@@ -546,16 +546,19 @@ int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
 		brelse(su_bh);
 		goto out_header;
 	}
+	suclean = nilfs_segment_usage_clean(su);
 
 	nilfs_segment_usage_set_error(su);
 	kunmap_atomic(kaddr, KM_USER0);
-	brelse(su_bh);
 
-	kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
-	header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
-	le64_add_cpu(&header->sh_ndirtysegs, -1);
-	kunmap_atomic(kaddr, KM_USER0);
-	nilfs_mdt_mark_buffer_dirty(header_bh);
+	if (suclean) {
+		kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
+		header = nilfs_sufile_block_get_header(sufile, header_bh,
+						       kaddr);
+		le64_add_cpu(&header->sh_ncleansegs, -1);
+		kunmap_atomic(kaddr, KM_USER0);
+		nilfs_mdt_mark_buffer_dirty(header_bh);
+	}
 	nilfs_mdt_mark_buffer_dirty(su_bh);
 	nilfs_mdt_mark_dirty(sufile);
 	brelse(su_bh);
-- 
GitLab


From a703018f7bbec8109419318f5d51f235fdce5155 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Sun, 5 Apr 2009 18:24:11 +0900
Subject: [PATCH 0093/1421] nilfs2: segment usage file cleanups

This will simplify sufile.c by sharing common code which repeatedly
appears in routines updating a segment usage entry; a wrapper function
nilfs_sufile_update() is introduced for the purpose, and counter
modifications are integrated to a new function
nilfs_sufile_mod_counter().

This is a preparation for the successive bugfix patch ("nilfs2: fix
possible mismatch of sufile counters on recovery").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/sufile.c | 268 +++++++++++++--------------------------------
 fs/nilfs2/sufile.h |  67 +++++++++++-
 2 files changed, 140 insertions(+), 195 deletions(-)

diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index 8b2f93ca1e1..07013f58dfe 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -93,6 +93,52 @@ nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum,
 				   create, NULL, bhp);
 }
 
+static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
+				     u64 ncleanadd, u64 ndirtyadd)
+{
+	struct nilfs_sufile_header *header;
+	void *kaddr;
+
+	kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
+	header = kaddr + bh_offset(header_bh);
+	le64_add_cpu(&header->sh_ncleansegs, ncleanadd);
+	le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd);
+	kunmap_atomic(kaddr, KM_USER0);
+
+	nilfs_mdt_mark_buffer_dirty(header_bh);
+}
+
+int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
+			void (*dofunc)(struct inode *, __u64,
+				       struct buffer_head *,
+				       struct buffer_head *))
+{
+	struct buffer_head *header_bh, *bh;
+	int ret;
+
+	if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
+		printk(KERN_WARNING "%s: invalid segment number: %llu\n",
+		       __func__, (unsigned long long)segnum);
+		return -EINVAL;
+	}
+	down_write(&NILFS_MDT(sufile)->mi_sem);
+
+	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
+	if (ret < 0)
+		goto out_sem;
+
+	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh);
+	if (!ret) {
+		dofunc(sufile, segnum, header_bh, bh);
+		brelse(bh);
+	}
+	brelse(header_bh);
+
+ out_sem:
+	up_write(&NILFS_MDT(sufile)->mi_sem);
+	return ret;
+}
+
 /**
  * nilfs_sufile_alloc - allocate a segment
  * @sufile: inode of segment usage file
@@ -113,7 +159,6 @@ nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum,
 int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
 {
 	struct buffer_head *header_bh, *su_bh;
-	struct the_nilfs *nilfs;
 	struct nilfs_sufile_header *header;
 	struct nilfs_segment_usage *su;
 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
@@ -124,8 +169,6 @@ int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
 
 	down_write(&NILFS_MDT(sufile)->mi_sem);
 
-	nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
 	if (ret < 0)
 		goto out_sem;
@@ -192,165 +235,55 @@ int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
 	return ret;
 }
 
-/**
- * nilfs_sufile_cancel_free -
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description:
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
+				 struct buffer_head *header_bh,
+				 struct buffer_head *su_bh)
 {
-	struct buffer_head *header_bh, *su_bh;
-	struct the_nilfs *nilfs;
-	struct nilfs_sufile_header *header;
 	struct nilfs_segment_usage *su;
 	void *kaddr;
-	int ret;
-
-	down_write(&NILFS_MDT(sufile)->mi_sem);
-
-	nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
-	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
-	if (ret < 0)
-		goto out_sem;
-
-	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
-	if (ret < 0)
-		goto out_header;
 
 	kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
-	su = nilfs_sufile_block_get_segment_usage(
-		sufile, segnum, su_bh, kaddr);
+	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
 	if (unlikely(!nilfs_segment_usage_clean(su))) {
 		printk(KERN_WARNING "%s: segment %llu must be clean\n",
 		       __func__, (unsigned long long)segnum);
 		kunmap_atomic(kaddr, KM_USER0);
-		goto out_su_bh;
+		return;
 	}
 	nilfs_segment_usage_set_dirty(su);
 	kunmap_atomic(kaddr, KM_USER0);
 
-	kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
-	header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
-	le64_add_cpu(&header->sh_ncleansegs, -1);
-	le64_add_cpu(&header->sh_ndirtysegs, 1);
-	kunmap_atomic(kaddr, KM_USER0);
-
-	nilfs_mdt_mark_buffer_dirty(header_bh);
+	nilfs_sufile_mod_counter(header_bh, -1, 1);
 	nilfs_mdt_mark_buffer_dirty(su_bh);
 	nilfs_mdt_mark_dirty(sufile);
-
- out_su_bh:
-	brelse(su_bh);
- out_header:
-	brelse(header_bh);
- out_sem:
-	up_write(&NILFS_MDT(sufile)->mi_sem);
-	return ret;
 }
 
-/**
- * nilfs_sufile_freev - free segments
- * @sufile: inode of segment usage file
- * @segnum: array of segment numbers
- * @nsegs: number of segments
- *
- * Description: nilfs_sufile_freev() frees segments specified by @segnum and
- * @nsegs, which must have been returned by a previous call to
- * nilfs_sufile_alloc().
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-#define NILFS_SUFILE_FREEV_PREALLOC	16
-int nilfs_sufile_freev(struct inode *sufile, __u64 *segnum, size_t nsegs)
+void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
+			  struct buffer_head *header_bh,
+			  struct buffer_head *su_bh)
 {
-	struct buffer_head *header_bh, **su_bh,
-		*su_bh_prealloc[NILFS_SUFILE_FREEV_PREALLOC];
-	struct the_nilfs *nilfs;
-	struct nilfs_sufile_header *header;
 	struct nilfs_segment_usage *su;
 	void *kaddr;
-	int ret, i;
+	int sudirty;
 
-	down_write(&NILFS_MDT(sufile)->mi_sem);
-
-	nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
-	/* prepare resources */
-	if (nsegs <= NILFS_SUFILE_FREEV_PREALLOC)
-		su_bh = su_bh_prealloc;
-	else {
-		su_bh = kmalloc(sizeof(*su_bh) * nsegs, GFP_NOFS);
-		if (su_bh == NULL) {
-			ret = -ENOMEM;
-			goto out_sem;
-		}
-	}
-
-	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
-	if (ret < 0)
-		goto out_su_bh;
-	for (i = 0; i < nsegs; i++) {
-		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum[i],
-							   0, &su_bh[i]);
-		if (ret < 0)
-			goto out_bh;
-	}
-
-	/* free segments */
-	for (i = 0; i < nsegs; i++) {
-		kaddr = kmap_atomic(su_bh[i]->b_page, KM_USER0);
-		su = nilfs_sufile_block_get_segment_usage(
-			sufile, segnum[i], su_bh[i], kaddr);
-		WARN_ON(nilfs_segment_usage_error(su));
-		nilfs_segment_usage_set_clean(su);
+	kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+	if (nilfs_segment_usage_clean(su)) {
+		printk(KERN_WARNING "%s: segment %llu is already clean\n",
+		       __func__, (unsigned long long)segnum);
 		kunmap_atomic(kaddr, KM_USER0);
-		nilfs_mdt_mark_buffer_dirty(su_bh[i]);
+		return;
 	}
-	kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
-	header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
-	le64_add_cpu(&header->sh_ncleansegs, nsegs);
-	le64_add_cpu(&header->sh_ndirtysegs, -(u64)nsegs);
-	kunmap_atomic(kaddr, KM_USER0);
-	nilfs_mdt_mark_buffer_dirty(header_bh);
-	nilfs_mdt_mark_dirty(sufile);
-
- out_bh:
-	for (i--; i >= 0; i--)
-		brelse(su_bh[i]);
-	brelse(header_bh);
+	WARN_ON(nilfs_segment_usage_error(su));
+	WARN_ON(!nilfs_segment_usage_dirty(su));
 
- out_su_bh:
-	if (su_bh != su_bh_prealloc)
-		kfree(su_bh);
-
- out_sem:
-	up_write(&NILFS_MDT(sufile)->mi_sem);
-	return ret;
-}
+	sudirty = nilfs_segment_usage_dirty(su);
+	nilfs_segment_usage_set_clean(su);
+	kunmap_atomic(kaddr, KM_USER0);
+	nilfs_mdt_mark_buffer_dirty(su_bh);
 
-/**
- * nilfs_sufile_free -
- * @sufile:
- * @segnum:
- */
-int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
-{
-	return nilfs_sufile_freev(sufile, &segnum, 1);
+	nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0);
+	nilfs_mdt_mark_dirty(sufile);
 }
 
 /**
@@ -500,75 +433,28 @@ int nilfs_sufile_get_ncleansegs(struct inode *sufile, unsigned long *nsegsp)
 	return ret;
 }
 
-/**
- * nilfs_sufile_set_error - mark a segment as erroneous
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description: nilfs_sufile_set_error() marks the segment specified by
- * @segnum as erroneous. The error segment will never be used again.
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- *
- * %-EINVAL - Invalid segment usage number.
- */
-int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
+			       struct buffer_head *header_bh,
+			       struct buffer_head *su_bh)
 {
-	struct buffer_head *header_bh, *su_bh;
 	struct nilfs_segment_usage *su;
-	struct nilfs_sufile_header *header;
 	void *kaddr;
-	int suclean, ret;
-
-	if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
-		printk(KERN_WARNING "%s: invalid segment number: %llu\n",
-		       __func__, (unsigned long long)segnum);
-		return -EINVAL;
-	}
-	down_write(&NILFS_MDT(sufile)->mi_sem);
-
-	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
-	if (ret < 0)
-		goto out_sem;
-	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
-	if (ret < 0)
-		goto out_header;
+	int suclean;
 
 	kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
 	if (nilfs_segment_usage_error(su)) {
 		kunmap_atomic(kaddr, KM_USER0);
-		brelse(su_bh);
-		goto out_header;
+		return;
 	}
 	suclean = nilfs_segment_usage_clean(su);
-
 	nilfs_segment_usage_set_error(su);
 	kunmap_atomic(kaddr, KM_USER0);
 
-	if (suclean) {
-		kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
-		header = nilfs_sufile_block_get_header(sufile, header_bh,
-						       kaddr);
-		le64_add_cpu(&header->sh_ncleansegs, -1);
-		kunmap_atomic(kaddr, KM_USER0);
-		nilfs_mdt_mark_buffer_dirty(header_bh);
-	}
+	if (suclean)
+		nilfs_sufile_mod_counter(header_bh, -1, 0);
 	nilfs_mdt_mark_buffer_dirty(su_bh);
 	nilfs_mdt_mark_dirty(sufile);
-	brelse(su_bh);
-
- out_header:
-	brelse(header_bh);
-
- out_sem:
-	up_write(&NILFS_MDT(sufile)->mi_sem);
-	return ret;
 }
 
 /**
diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h
index d595f33a768..449a6e2671b 100644
--- a/fs/nilfs2/sufile.h
+++ b/fs/nilfs2/sufile.h
@@ -36,9 +36,6 @@ static inline unsigned long nilfs_sufile_get_nsegments(struct inode *sufile)
 }
 
 int nilfs_sufile_alloc(struct inode *, __u64 *);
-int nilfs_sufile_cancel_free(struct inode *, __u64);
-int nilfs_sufile_freev(struct inode *, __u64 *, size_t);
-int nilfs_sufile_free(struct inode *, __u64);
 int nilfs_sufile_get_segment_usage(struct inode *, __u64,
 				   struct nilfs_segment_usage **,
 				   struct buffer_head **);
@@ -46,9 +43,71 @@ void nilfs_sufile_put_segment_usage(struct inode *, __u64,
 				    struct buffer_head *);
 int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *);
 int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *);
-int nilfs_sufile_set_error(struct inode *, __u64);
 ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *,
 				size_t);
 
+int nilfs_sufile_update(struct inode *, __u64, int,
+			void (*dofunc)(struct inode *, __u64,
+				       struct buffer_head *,
+				       struct buffer_head *));
+void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
+				 struct buffer_head *);
+void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
+			  struct buffer_head *);
+void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
+			       struct buffer_head *);
+
+/**
+ * nilfs_sufile_cancel_free -
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description:
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ */
+static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+{
+	return nilfs_sufile_update(sufile, segnum, 0,
+				   nilfs_sufile_do_cancel_free);
+}
+
+/**
+ * nilfs_sufile_free - free segment
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
+{
+	return nilfs_sufile_update(sufile, segnum, 0, nilfs_sufile_do_free);
+}
+
+/**
+ * nilfs_sufile_set_error - mark a segment as erroneous
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description: nilfs_sufile_set_error() marks the segment specified by
+ * @segnum as erroneous. The error segment will never be used again.
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-EINVAL - Invalid segment usage number.
+ */
+static inline int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+{
+	return nilfs_sufile_update(sufile, segnum, 0,
+				   nilfs_sufile_do_set_error);
+}
 
 #endif	/* _NILFS_SUFILE_H */
-- 
GitLab


From c85399c2da8b86de8f6877980294fa1a4a88a5a4 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Sun, 5 Apr 2009 18:30:58 +0900
Subject: [PATCH 0094/1421] nilfs2: fix possible mismatch of sufile counters on
 recovery

On-disk counters ndirtysegs and ncleansegs of sufile, can go wrong
after roll-forward recovery because
nilfs_prepare_segment_for_recovery() function marks segments dirty
without adjusting value of these counters.

This fixes the problem by adding a function to sufile which does the
operation adjusting the counters, and by letting the recovery function
use it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/recovery.c | 20 ++++----------------
 fs/nilfs2/sufile.c   | 29 +++++++++++++++++++++++++++++
 fs/nilfs2/sufile.h   | 12 ++++++++++++
 3 files changed, 45 insertions(+), 16 deletions(-)

diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 6ade0963fc1..4fc081e47d7 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -413,7 +413,6 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	struct nilfs_segment_entry *ent, *n;
 	struct inode *sufile = nilfs->ns_sufile;
 	__u64 segnum[4];
-	time_t mtime;
 	int err;
 	int i;
 
@@ -442,24 +441,13 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	 * Collecting segments written after the latest super root.
 	 * These are marked dirty to avoid being reallocated in the next write.
 	 */
-	mtime = get_seconds();
 	list_for_each_entry_safe(ent, n, head, list) {
-		if (ent->segnum == segnum[0]) {
-			list_del(&ent->list);
-			nilfs_free_segment_entry(ent);
-			continue;
-		}
-		err = nilfs_open_segment_entry(ent, sufile);
-		if (unlikely(err))
-			goto failed;
-		if (!nilfs_segment_usage_dirty(ent->raw_su)) {
-			/* make the segment garbage */
-			ent->raw_su->su_nblocks = cpu_to_le32(0);
-			ent->raw_su->su_lastmod = cpu_to_le32(mtime);
-			nilfs_segment_usage_set_dirty(ent->raw_su);
+		if (ent->segnum != segnum[0]) {
+			err = nilfs_sufile_scrap(sufile, ent->segnum);
+			if (unlikely(err))
+				goto failed;
 		}
 		list_del(&ent->list);
-		nilfs_close_segment_entry(ent, sufile);
 		nilfs_free_segment_entry(ent);
 	}
 
diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index 07013f58dfe..98e68677f04 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -258,6 +258,35 @@ void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
 	nilfs_mdt_mark_dirty(sufile);
 }
 
+void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum,
+			   struct buffer_head *header_bh,
+			   struct buffer_head *su_bh)
+{
+	struct nilfs_segment_usage *su;
+	void *kaddr;
+	int clean, dirty;
+
+	kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+	if (su->su_flags == cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY) &&
+	    su->su_nblocks == cpu_to_le32(0)) {
+		kunmap_atomic(kaddr, KM_USER0);
+		return;
+	}
+	clean = nilfs_segment_usage_clean(su);
+	dirty = nilfs_segment_usage_dirty(su);
+
+	/* make the segment garbage */
+	su->su_lastmod = cpu_to_le64(0);
+	su->su_nblocks = cpu_to_le32(0);
+	su->su_flags = cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY);
+	kunmap_atomic(kaddr, KM_USER0);
+
+	nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1);
+	nilfs_mdt_mark_buffer_dirty(su_bh);
+	nilfs_mdt_mark_dirty(sufile);
+}
+
 void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
 			  struct buffer_head *header_bh,
 			  struct buffer_head *su_bh)
diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h
index 449a6e2671b..a2e2efd4ade 100644
--- a/fs/nilfs2/sufile.h
+++ b/fs/nilfs2/sufile.h
@@ -52,6 +52,8 @@ int nilfs_sufile_update(struct inode *, __u64, int,
 				       struct buffer_head *));
 void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
 				 struct buffer_head *);
+void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *,
+			   struct buffer_head *);
 void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
 			  struct buffer_head *);
 void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
@@ -77,6 +79,16 @@ static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
 				   nilfs_sufile_do_cancel_free);
 }
 
+/**
+ * nilfs_sufile_scrap - make a segment garbage
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_scrap(struct inode *sufile, __u64 segnum)
+{
+	return nilfs_sufile_update(sufile, segnum, 1, nilfs_sufile_do_scrap);
+}
+
 /**
  * nilfs_sufile_free - free segment
  * @sufile: inode of segment usage file
-- 
GitLab


From 2b2562d38130c769ee59948ba7e1f93d3787ca43 Mon Sep 17 00:00:00 2001
From: Daniel Ribeiro <drwyrm@gmail.com>
Date: Wed, 8 Apr 2009 22:48:03 -0300
Subject: [PATCH 0095/1421] [ARM] pxa: fix typo of cs_deassert() in
 pxa2xx-spi.c

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 drivers/spi/pxa2xx_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index c1688c71f05..c76feea5fe2 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -195,7 +195,7 @@ static void cs_deassert(struct driver_data *drv_data)
 	struct chip_data *chip = drv_data->cur_chip;
 
 	if (chip->cs_control) {
-		chip->cs_control(PXA2XX_CS_ASSERT);
+		chip->cs_control(PXA2XX_CS_DEASSERT);
 		return;
 	}
 
-- 
GitLab


From 918c71c0ff302637b745104e8ffe6142a64f514c Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 10 Apr 2009 10:42:50 +0800
Subject: [PATCH 0096/1421] [ARM] pxa: add missing declaration of
 pxa26x_init_irq()

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/generic.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3465268ca71..485fede83d9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer;
 extern void __init pxa_init_irq(int irq_nr,
 				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
-- 
GitLab


From efb12cd20ace78aca03304f356f9c9c0c9ca3f66 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 12 Apr 2009 16:37:23 +0200
Subject: [PATCH 0097/1421] [ARM] pxa: PalmTX and PalmT5 USB fixes

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/palmt5.h |  1 -
 arch/arm/mach-pxa/include/mach/palmtx.h |  1 -
 arch/arm/mach-pxa/palmt5.c              | 11 ++++++-----
 arch/arm/mach-pxa/palmtx.c              | 11 ++++++-----
 4 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 052bfe788ad..d15662aba00 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -37,7 +37,6 @@
 
 /* USB */
 #define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_POWER		95
 #define GPIO_NR_PALMT5_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 9f7d62fb4cb..e74082c872e 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -38,7 +38,6 @@
 
 /* USB */
 #define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_POWER		95
 #define GPIO_NR_PALMTX_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0680f1a575a..d7f81068c61 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* MATRIX KEYPAD */
 	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -490,9 +491,9 @@ static struct platform_device *devices[] __initdata = {
 /* setup udc GPIOs initial state */
 static void __init palmt5_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 59d0c1cba55..14393d0ad8b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -64,6 +64,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -75,7 +76,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO13_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -359,7 +360,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -514,9 +515,9 @@ static void __init palmtx_map_io(void)
 /* setup udc GPIOs initial state */
 static void __init palmtx_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
 	}
 }
 
-- 
GitLab


From fc3f55e672e1ed917dd9e215af81939cd3d717da Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 13 Apr 2009 06:40:04 +0000
Subject: [PATCH 0098/1421] sh: ap325: use edge control for ov772x camera

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 912458f666e..39e46919df1 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -349,6 +349,7 @@ static int ov7725_power(struct device *dev, int mode)
 static struct ov772x_camera_info ov7725_info = {
 	.buswidth  = SOCAM_DATAWIDTH_8,
 	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
 	.link = {
 		.power  = ov7725_power,
 	},
-- 
GitLab


From 920e4ae31cb113328e617f4a0663fb17d7b09124 Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Mon, 13 Apr 2009 20:45:42 +0200
Subject: [PATCH 0099/1421] [ALSA] intel8x0: an attempt to make ac97_clock
 measurement more reliable

- use monotonic posix clock to measure time
- try to avoid reading zero from PICB (position in current buffer) register
- show also measured samples
- when clock is near 41000 or 44100, use exactly these values
  (they appears to be reference clocks for hardware manufacturers)

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/intel8x0.c | 37 ++++++++++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 9 deletions(-)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 57648810eaf..c86ff499460 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2661,8 +2661,9 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	struct snd_pcm_substream *subs;
 	struct ichdev *ichdev;
 	unsigned long port;
-	unsigned long pos, t;
-	struct timeval start_time, stop_time;
+	unsigned long pos, pos1, t;
+	int civ, timeout = 1000;
+	struct timespec start_time, stop_time;
 
 	if (chip->ac97_bus->clock != 48000)
 		return; /* specified in module option */
@@ -2693,16 +2694,27 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 		iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE);
 		iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot);
 	}
-	do_gettimeofday(&start_time);
+	do_posix_clock_monotonic_gettime(&start_time);
 	spin_unlock_irq(&chip->reg_lock);
 	msleep(50);
 	spin_lock_irq(&chip->reg_lock);
 	/* check the position */
+	do {
+		civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV);
+		pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb);
+		if (pos1 == 0) {
+			udelay(10);
+			continue;
+		}
+		if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
+		    pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+			break;
+	} while (timeout--);
 	pos = ichdev->fragsize1;
-	pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift;
+	pos -= pos1 << ichdev->pos_shift;
 	pos += ichdev->position;
 	chip->in_measurement = 0;
-	do_gettimeofday(&stop_time);
+	do_posix_clock_monotonic_gettime(&stop_time);
 	/* stop */
 	if (chip->device_type == DEVICE_ALI) {
 		iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16));
@@ -2717,19 +2729,26 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
 	spin_unlock_irq(&chip->reg_lock);
 
+	pos /= 4;
 	t = stop_time.tv_sec - start_time.tv_sec;
 	t *= 1000000;
-	t += stop_time.tv_usec - start_time.tv_usec;
-	printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t);
+	t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
+	printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
 	if (t == 0) {
-		snd_printk(KERN_ERR "?? calculation error..\n");
+		snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
 		return;
 	}
-	pos = (pos / 4) * 1000;
+	pos *= 1000;
 	pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
 	if (pos < 40000 || pos >= 60000) 
 		/* abnormal value. hw problem? */
 		printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
+	else if (pos > 40500 || pos < 41500)
+		/* first exception - 41000Hz reference clock */
+		chip->ac97_bus->clock = 41000;
+	else if (pos > 43600 || pos < 44600)
+		/* second exception - 44100HZ reference clock */
+		chip->ac97_bus->clock = 44100;
 	else if (pos < 47500 || pos > 48500)
 		/* not 48000Hz, tuning the clock.. */
 		chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
-- 
GitLab


From da2436a23c038055b1da6fe30b6ea2886b1e07b0 Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Mon, 13 Apr 2009 21:31:25 +0200
Subject: [PATCH 0100/1421] [ALSA] intel8x0: do not use zero value from PICB
 register

It seems that the zero value from the PICB (position in current buffer)
register is not reliable. Use jiffies to correct returned value
from the ring buffer pointer callback.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/intel8x0.c | 43 +++++++++++++++++++++++++++++++++----------
 1 file changed, 33 insertions(+), 10 deletions(-)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index c86ff499460..6962f94d1be 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -355,6 +355,9 @@ struct ichdev {
         unsigned int fragsize1;
         unsigned int position;
 	unsigned int pos_shift;
+	unsigned int last_pos;
+	unsigned long last_pos_jiffies;
+	unsigned int jiffy_to_bytes;
         int frags;
         int lvi;
         int lvi_frag;
@@ -838,7 +841,10 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd
 		ichdev->suspended = 0;
 		/* fallthru */
 	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ICH_IOCE | ICH_STARTBM;
+		ichdev->last_pos = ichdev->position;
+		ichdev->last_pos_jiffies = jiffies;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		ichdev->suspended = 1;
@@ -849,9 +855,6 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		val = ICH_IOCE;
 		break;
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		val = ICH_IOCE | ICH_STARTBM;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -1045,6 +1048,7 @@ static int snd_intel8x0_pcm_prepare(struct snd_pcm_substream *substream)
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
+	ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
 	return 0;
 }
 
@@ -1053,7 +1057,7 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs
 	struct intel8x0 *chip = snd_pcm_substream_chip(substream);
 	struct ichdev *ichdev = get_ichdev(substream);
 	size_t ptr1, ptr;
-	int civ, timeout = 100;
+	int civ, timeout = 10;
 	unsigned int position;
 
 	spin_lock(&chip->reg_lock);
@@ -1069,9 +1073,19 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs
 		    ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
-	ptr1 <<= ichdev->pos_shift;
-	ptr = ichdev->fragsize1 - ptr1;
-	ptr += position;
+	if (ptr1 != 0) {
+		ptr1 <<= ichdev->pos_shift;
+		ptr = ichdev->fragsize1 - ptr1;
+		ptr += position;
+		ichdev->last_pos = ptr;
+		ichdev->last_pos_jiffies = jiffies;
+	} else {
+		ptr1 = jiffies - ichdev->last_pos_jiffies;
+		if (ptr1)
+			ptr1 -= 1;
+		ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
+		ptr %= ichdev->size;
+	}
 	spin_unlock(&chip->reg_lock);
 	if (ptr >= ichdev->size)
 		return 0;
@@ -2710,9 +2724,13 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 		    pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
-	pos = ichdev->fragsize1;
-	pos -= pos1 << ichdev->pos_shift;
-	pos += ichdev->position;
+	if (pos1 == 0) {	/* oops, this value is not reliable */
+		pos = 0;
+	} else {
+		pos = ichdev->fragsize1;
+		pos -= pos1 << ichdev->pos_shift;
+		pos += ichdev->position;
+	}
 	chip->in_measurement = 0;
 	do_posix_clock_monotonic_gettime(&stop_time);
 	/* stop */
@@ -2729,6 +2747,11 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
 	spin_unlock_irq(&chip->reg_lock);
 
+	if (pos == 0) {
+		snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+		return;
+	}
+
 	pos /= 4;
 	t = stop_time.tv_sec - start_time.tv_sec;
 	t *= 1000000;
-- 
GitLab


From 066069e14f6b4651293ae0865c121bcb2b360666 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 14 Apr 2009 06:32:08 +0900
Subject: [PATCH 0101/1421] MAINTAINERS: Update sh architecture file patterns.

Fill in missing entries for drivers/sh/ and Documentation/sh/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index ca2997a4576..597cd0cc29c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5313,7 +5313,9 @@ L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
 S:	Supported
+F:	Documentation/sh/
 F:	arch/sh/
+F:	drivers/sh/
 
 SUSPEND TO RAM
 P:	Len Brown
-- 
GitLab


From a3d03ecaf9fe722bf96e4ef4a2f5e42ef652ddeb Mon Sep 17 00:00:00 2001
From: Zhaolei <zhaolei@cn.fujitsu.com>
Date: Mon, 13 Apr 2009 15:23:53 +0800
Subject: [PATCH 0102/1421] tracing: Fix power tracer header

Before patch:
  # tracer: power
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
  #              | |       |          |         |
  [  676.875865889] CSTATE: Going to C1 on cpu 0 for 0.005911463
  [  676.882938805] CSTATE: Going to C1 on cpu 0 for 0.104796532
  ...

After patch:
  # tracer: power
  #
  #   TIMESTAMP      STATE  EVENT
  #       |            |      |
  [  676.875865889] CSTATE: Going to C1 on cpu 0 for 0.005911463
  [  676.882938805] CSTATE: Going to C1 on cpu 0 for 0.104796532
  ...

v2: Use seq_puts instead of seq_printf

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49E2E889.5000903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_power.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
index bae791ebcc5..118439709fb 100644
--- a/kernel/trace/trace_power.c
+++ b/kernel/trace/trace_power.c
@@ -186,6 +186,12 @@ static enum print_line_t power_print_line(struct trace_iterator *iter)
 	return TRACE_TYPE_UNHANDLED;
 }
 
+static void power_print_header(struct seq_file *s)
+{
+	seq_puts(s, "#   TIMESTAMP      STATE  EVENT\n");
+	seq_puts(s, "#       |            |      |\n");
+}
+
 static struct tracer power_tracer __read_mostly =
 {
 	.name		= "power",
@@ -194,6 +200,7 @@ static struct tracer power_tracer __read_mostly =
 	.stop		= stop_power_trace,
 	.reset		= power_trace_reset,
 	.print_line	= power_print_line,
+	.print_header	= power_print_header,
 };
 
 static int init_power_trace(void)
-- 
GitLab


From 4be6f6bb66111c9468733a4ed9cad10dc3a762c0 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Mon, 13 Apr 2009 14:39:33 -0700
Subject: [PATCH 0103/1421] mm: move the scan_unevictable_pages sysctl to the
 vm table

vm knobs should go in the vm table.  Probably too late for
randomize_va_space though.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sysctl.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4286b62b34a..e3d2c7dd59b 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -902,16 +902,6 @@ static struct ctl_table kern_table[] = {
 		.proc_handler   = &proc_dointvec,
 	},
 #endif
-#ifdef CONFIG_UNEVICTABLE_LRU
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "scan_unevictable_pages",
-		.data		= &scan_unevictable_pages,
-		.maxlen		= sizeof(scan_unevictable_pages),
-		.mode		= 0644,
-		.proc_handler	= &scan_unevictable_handler,
-	},
-#endif
 #ifdef CONFIG_SLOW_WORK
 	{
 		.ctl_name	= CTL_UNNUMBERED,
@@ -1302,6 +1292,16 @@ static struct ctl_table vm_table[] = {
 		.extra2		= &one,
 	},
 #endif
+#ifdef CONFIG_UNEVICTABLE_LRU
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "scan_unevictable_pages",
+		.data		= &scan_unevictable_pages,
+		.maxlen		= sizeof(scan_unevictable_pages),
+		.mode		= 0644,
+		.proc_handler	= &scan_unevictable_handler,
+	},
+#endif
 /*
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
-- 
GitLab


From 510f32b308d121248ea2ccd1b241fed548993670 Mon Sep 17 00:00:00 2001
From: Jan Dumon <j.dumon@option.com>
Date: Mon, 13 Apr 2009 14:39:34 -0700
Subject: [PATCH 0104/1421] MAINTAINERS: switch maintainer of the hso driver

Since Denis is no longer working for Option, I will maintain the driver from
now on.

Signed-off-by: Jan Dumon <j.dumon@option.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index ca2997a4576..1f0b14d84c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2592,8 +2592,8 @@ S:	Maintained
 F:	fs/hpfs/
 
 HSO 3G MODEM DRIVER
-P:	Denis Joseph Barrow
-M:	d.barow@option.com
+P:	Jan Dumon
+M:	j.dumon@option.com
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
-- 
GitLab


From f403bb802f634d5727e4d48a987ce02ef8dd8ce0 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 13 Apr 2009 14:39:36 -0700
Subject: [PATCH 0105/1421] MAINTAINERS: fix Andreas's email address

Correct typo in email address.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 1f0b14d84c4..00ca6156332 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -461,7 +461,7 @@ F:	arch/x86/include/asm/amd_iommu*.h
 
 AMD MICROCODE UPDATE SUPPORT
 P:	Andreas Herrmann
-M:	andeas.herrmann3@amd.com
+M:	andreas.herrmann3@amd.com
 L:	amd64-microcode@amd64.org
 S:	Supported
 F:	arch/x86/kernel/microcode_amd.c
-- 
GitLab


From ca8b9950298c84ca528a5943409a727c04ec88f8 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Mon, 13 Apr 2009 14:39:36 -0700
Subject: [PATCH 0106/1421] Documentation/sysctl/net.txt: fix a typo

s/spicified/specified

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/sysctl/net.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index a34d55b6544..df38ef046f8 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -95,7 +95,7 @@ of struct cmsghdr structures with appended data.
 
 There is only one file in this directory.
 unix_dgram_qlen limits the max number of datagrams queued in Unix domain
-socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
 
 
 3. /proc/sys/net/ipv4 - IPV4 settings
-- 
GitLab


From 2f6f6c6b5c4774cfdbe759eea1f5203a4b26fe6f Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Mon, 13 Apr 2009 14:39:37 -0700
Subject: [PATCH 0107/1421] hp_accel: remove unused #include <version.h>

Remove unused #include <version.h> in drivers/hwmon/hp_accel.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/hwmon/hp_accel.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 55d3dc565be..abca7e9f953 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -34,7 +34,6 @@
 #include <linux/wait.h>
 #include <linux/poll.h>
 #include <linux/freezer.h>
-#include <linux/version.h>
 #include <linux/uaccess.h>
 #include <linux/leds.h>
 #include <acpi/acpi_drivers.h>
-- 
GitLab


From b52bb3712a64c404846f30300b339cfd01e316be Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Mon, 13 Apr 2009 14:39:38 -0700
Subject: [PATCH 0108/1421] init/initramfs: fix warning with
 CONFIG_BLK_DEV_RAM=n

init/initramfs.c:520: warning: 'clean_rootfs' defined but not used

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/initramfs.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/init/initramfs.c b/init/initramfs.c
index 80cd713f6cc..e44f2d932cc 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -515,6 +515,7 @@ skip:
 	initrd_end = 0;
 }
 
+#ifdef CONFIG_BLK_DEV_RAM
 #define BUF_SIZE 1024
 static void __init clean_rootfs(void)
 {
@@ -561,6 +562,7 @@ static void __init clean_rootfs(void)
 	sys_close(fd);
 	kfree(buf);
 }
+#endif
 
 static int __init populate_rootfs(void)
 {
-- 
GitLab


From 513adb58685615b0b1d47a3f0d40f5352beff189 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Mon, 13 Apr 2009 14:39:39 -0700
Subject: [PATCH 0109/1421] fbdev: fix info->lock deadlock in
 fbcon_event_notify()

fb_notifier_call_chain() is called with info->lock held, i.e.  in
do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some
notifier callbacks, like fbcon_event_notify(), try to re-acquire
info->lock again.

Remove the lock/unlock_fb_info() in all the framebuffer notifier
callbacks' and be sure to always call fb_notifier_call_chain() with
info->lock held.

Reported-by: Pavel Roskin <proski@gnu.org>
Reported-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/backlight.c |  3 --
 drivers/video/backlight/lcd.c       |  3 --
 drivers/video/console/fbcon.c       | 55 ++---------------------------
 drivers/video/fbmem.c               | 19 ++++++++++
 4 files changed, 22 insertions(+), 58 deletions(-)

diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index dd37cbcaf8c..157057c79ca 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -35,8 +35,6 @@ static int fb_notifier_callback(struct notifier_block *self,
 		return 0;
 
 	bd = container_of(self, struct backlight_device, fb_notif);
-	if (!lock_fb_info(evdata->info))
-		return -ENODEV;
 	mutex_lock(&bd->ops_lock);
 	if (bd->ops)
 		if (!bd->ops->check_fb ||
@@ -49,7 +47,6 @@ static int fb_notifier_callback(struct notifier_block *self,
 			backlight_update_status(bd);
 		}
 	mutex_unlock(&bd->ops_lock);
-	unlock_fb_info(evdata->info);
 	return 0;
 }
 
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 0bb13df0fa8..b6449470106 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -40,8 +40,6 @@ static int fb_notifier_callback(struct notifier_block *self,
 	if (!ld->ops)
 		return 0;
 
-	if (!lock_fb_info(evdata->info))
-		return -ENODEV;
 	mutex_lock(&ld->ops_lock);
 	if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
 		if (event == FB_EVENT_BLANK) {
@@ -53,7 +51,6 @@ static int fb_notifier_callback(struct notifier_block *self,
 		}
 	}
 	mutex_unlock(&ld->ops_lock);
-	unlock_fb_info(evdata->info);
 	return 0;
 }
 
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 2cd500a304f..471a9a60376 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2263,9 +2263,12 @@ static void fbcon_generic_blank(struct vc_data *vc, struct fb_info *info,
 	}
 
 
+	if (!lock_fb_info(info))
+		return;
 	event.info = info;
 	event.data = &blank;
 	fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
+	unlock_fb_info(info);
 }
 
 static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
@@ -2956,8 +2959,6 @@ static int fbcon_fb_unregistered(struct fb_info *info)
 {
 	int i, idx;
 
-	if (!lock_fb_info(info))
-		return -ENODEV;
 	idx = info->node;
 	for (i = first_fb_vc; i <= last_fb_vc; i++) {
 		if (con2fb_map[i] == idx)
@@ -2985,8 +2986,6 @@ static int fbcon_fb_unregistered(struct fb_info *info)
 	if (primary_device == idx)
 		primary_device = -1;
 
-	unlock_fb_info(info);
-
 	if (!num_registered_fb)
 		unregister_con_driver(&fb_con);
 
@@ -3027,11 +3026,8 @@ static int fbcon_fb_registered(struct fb_info *info)
 {
 	int ret = 0, i, idx;
 
-	if (!lock_fb_info(info))
-		return -ENODEV;
 	idx = info->node;
 	fbcon_select_primary(info);
-	unlock_fb_info(info);
 
 	if (info_idx == -1) {
 		for (i = first_fb_vc; i <= last_fb_vc; i++) {
@@ -3152,53 +3148,23 @@ static int fbcon_event_notify(struct notifier_block *self,
 
 	switch(action) {
 	case FB_EVENT_SUSPEND:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_suspended(info);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_RESUME:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_resumed(info);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_MODE_CHANGE:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_modechanged(info);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_MODE_CHANGE_ALL:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_set_all_vcs(info);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_MODE_DELETE:
 		mode = event->data;
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		ret = fbcon_mode_deleted(info, mode);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_FB_UNBIND:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		idx = info->node;
-		unlock_fb_info(info);
 		ret = fbcon_fb_unbind(idx);
 		break;
 	case FB_EVENT_FB_REGISTERED:
@@ -3217,29 +3183,14 @@ static int fbcon_event_notify(struct notifier_block *self,
 		con2fb->framebuffer = con2fb_map[con2fb->console - 1];
 		break;
 	case FB_EVENT_BLANK:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_fb_blanked(info, *(int *)event->data);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_NEW_MODELIST:
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_new_modelist(info);
-		unlock_fb_info(info);
 		break;
 	case FB_EVENT_GET_REQ:
 		caps = event->data;
-		if (!lock_fb_info(info)) {
-			ret = -ENODEV;
-			goto done;
-		}
 		fbcon_get_requirement(info, caps);
-		unlock_fb_info(info);
 		break;
 	}
 done:
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 2ac32e6b595..d412a1ddc12 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1097,8 +1097,11 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
 			return -EINVAL;
 		con2fb.framebuffer = -1;
 		event.data = &con2fb;
+		if (!lock_fb_info(info))
+			return -ENODEV;
 		event.info = info;
 		fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+		unlock_fb_info(info);
 		ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
 		break;
 	case FBIOPUT_CON2FBMAP:
@@ -1115,8 +1118,11 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
 			break;
 		}
 		event.data = &con2fb;
+		if (!lock_fb_info(info))
+			return -ENODEV;
 		event.info = info;
 		ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
+		unlock_fb_info(info);
 		break;
 	case FBIOBLANK:
 		if (!lock_fb_info(info))
@@ -1521,7 +1527,10 @@ register_framebuffer(struct fb_info *fb_info)
 	registered_fb[i] = fb_info;
 
 	event.info = fb_info;
+	if (!lock_fb_info(fb_info))
+		return -ENODEV;
 	fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+	unlock_fb_info(fb_info);
 	return 0;
 }
 
@@ -1555,8 +1564,12 @@ unregister_framebuffer(struct fb_info *fb_info)
 		goto done;
 	}
 
+
+	if (!lock_fb_info(fb_info))
+		return -ENODEV;
 	event.info = fb_info;
 	ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+	unlock_fb_info(fb_info);
 
 	if (ret) {
 		ret = -EINVAL;
@@ -1590,6 +1603,8 @@ void fb_set_suspend(struct fb_info *info, int state)
 {
 	struct fb_event event;
 
+	if (!lock_fb_info(info))
+		return;
 	event.info = info;
 	if (state) {
 		fb_notifier_call_chain(FB_EVENT_SUSPEND, &event);
@@ -1598,6 +1613,7 @@ void fb_set_suspend(struct fb_info *info, int state)
 		info->state = FBINFO_STATE_RUNNING;
 		fb_notifier_call_chain(FB_EVENT_RESUME, &event);
 	}
+	unlock_fb_info(info);
 }
 
 /**
@@ -1667,8 +1683,11 @@ int fb_new_modelist(struct fb_info *info)
 	err = 1;
 
 	if (!list_empty(&info->modelist)) {
+		if (!lock_fb_info(info))
+			return -ENODEV;
 		event.info = info;
 		err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
+		unlock_fb_info(info);
 	}
 
 	return err;
-- 
GitLab


From ebde441177da3bad156701d351509f34295282ab Mon Sep 17 00:00:00 2001
From: Michal Januszewski <spock@gentoo.org>
Date: Mon, 13 Apr 2009 14:39:41 -0700
Subject: [PATCH 0110/1421] fbdev: fix color component field length
 documentation

The documentation about the meaning of the color component bitfield
lengths in pseudocolor modes is inconsistent.  Fix it, so that it
indicates the correct interpretation everywhere, i.e.  that 1 << length is
the number of palette entries.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <syrjala@sci.fi>
Acked-by: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/skeletonfb.c |  8 +++++---
 drivers/video/vfb.c        | 11 +++++++----
 include/linux/fb.h         |  8 ++++++--
 3 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index a439159204a..89158bc71da 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -308,9 +308,11 @@ static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
      *   color depth = SUM(var->{color}.length)
      *
      * Pseudocolor:
-     *    var->{color}.offset is 0
-     *    var->{color}.length contains width of DAC or the number of unique
-     *                        colors available (color depth)
+     *    var->{color}.offset is 0 unless the palette index takes less than
+     *                        bits_per_pixel bits and is stored in the upper
+     *                        bits of the pixel value
+     *    var->{color}.length is set so that 1 << length is the number of
+     *                        available palette entries
      *    pseudo_palette is not used
      *    RAMDAC[X] is programmed to (red, green, blue)
      *    color depth = var->{color}.length
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index cc919ae4657..050d432c7d9 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -318,13 +318,16 @@ static int vfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 *   {hardwarespecific} contains width of RAMDAC
 	 *   cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
 	 *   RAMDAC[X] is programmed to (red, green, blue)
-	 * 
+	 *
 	 * Pseudocolor:
-	 *    uses offset = 0 && length = RAMDAC register width.
-	 *    var->{color}.offset is 0
-	 *    var->{color}.length contains widht of DAC
+	 *    var->{color}.offset is 0 unless the palette index takes less than
+	 *                        bits_per_pixel bits and is stored in the upper
+	 *                        bits of the pixel value
+	 *    var->{color}.length is set so that 1 << length is the number of available
+	 *                        palette entries
 	 *    cmap is not used
 	 *    RAMDAC[X] is programmed to (red, green, blue)
+	 *
 	 * Truecolor:
 	 *    does not use DAC. Usually 3 are present.
 	 *    var->{color}.offset contains start of bitfield
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f563c501393..330c4b1bfca 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -173,8 +173,12 @@ struct fb_fix_screeninfo {
 /* Interpretation of offset for color fields: All offsets are from the right,
  * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
  * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified. This implies
- * big-endian byte order if bits_per_pixel is greater than 8.
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
  */
 struct fb_bitfield {
 	__u32 offset;			/* beginning of bitfield	*/
-- 
GitLab


From 0ca1071f7dbd673de826eb3fb01bfdfd1d423433 Mon Sep 17 00:00:00 2001
From: Michal Januszewski <spock@gentoo.org>
Date: Mon, 13 Apr 2009 14:39:43 -0700
Subject: [PATCH 0111/1421] uvesafb: fix color component length for pseudocolor
 modes

uvesafb incorrectly sets the length of the color fields to 6 bits for
PSEUDOCOLOR modes, even though 8 bits are always used per pixel.  Fix this
by setting the length to 8.

The switch of the DAC width from the default 6 bits to 8 bits is retained
and tracked internally in the driver, but never exposed to userspace.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <syrjala@sci.fi>
Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/uvesafb.c | 35 ++++++++++-------------------------
 1 file changed, 10 insertions(+), 25 deletions(-)

diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 0b370aebdbf..421770b5e6a 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -55,6 +55,7 @@ static u16 maxvf	__devinitdata; /* maximum vertical frequency */
 static u16 maxhf	__devinitdata; /* maximum horizontal frequency */
 static u16 vbemode	__devinitdata; /* force use of a specific VBE mode */
 static char *mode_option __devinitdata;
+static u8  dac_width	= 6;
 
 static struct uvesafb_ktask *uvfb_tasks[UVESAFB_TASKS_MAX];
 static DEFINE_MUTEX(uvfb_lock);
@@ -303,22 +304,10 @@ static void uvesafb_setup_var(struct fb_var_screeninfo *var,
 		var->blue.offset   = 0;
 		var->transp.offset = 0;
 
-		/*
-		 * We're assuming that we can switch the DAC to 8 bits. If
-		 * this proves to be incorrect, we'll update the fields
-		 * later in set_par().
-		 */
-		if (par->vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) {
-			var->red.length    = 8;
-			var->green.length  = 8;
-			var->blue.length   = 8;
-			var->transp.length = 0;
-		} else {
-			var->red.length    = 6;
-			var->green.length  = 6;
-			var->blue.length   = 6;
-			var->transp.length = 0;
-		}
+		var->red.length    = 8;
+		var->green.length  = 8;
+		var->blue.length   = 8;
+		var->transp.length = 0;
 	}
 }
 
@@ -1006,7 +995,7 @@ static int uvesafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 		struct fb_info *info)
 {
 	struct uvesafb_pal_entry entry;
-	int shift = 16 - info->var.green.length;
+	int shift = 16 - dac_width;
 	int err = 0;
 
 	if (regno >= info->cmap.len)
@@ -1055,7 +1044,7 @@ static int uvesafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 static int uvesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
 {
 	struct uvesafb_pal_entry *entries;
-	int shift = 16 - info->var.green.length;
+	int shift = 16 - dac_width;
 	int i, err = 0;
 
 	if (info->var.bits_per_pixel == 8) {
@@ -1317,13 +1306,9 @@ setmode:
 		err = uvesafb_exec(task);
 		if (err || (task->t.regs.eax & 0xffff) != 0x004f ||
 		    ((task->t.regs.ebx & 0xff00) >> 8) != 8) {
-			/*
-			 * We've failed to set the DAC palette format -
-			 * time to correct var.
-			 */
-			info->var.red.length    = 6;
-			info->var.green.length  = 6;
-			info->var.blue.length   = 6;
+			dac_width = 6;
+		} else {
+			dac_width = 8;
 		}
 	}
 
-- 
GitLab


From 133bb070e94ab41d750c6f2160c8843e46f11b78 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Mon, 13 Apr 2009 14:39:44 -0700
Subject: [PATCH 0112/1421] efifb: exit if framebuffer address is invalid

efifb will attempt to ioremap a framebuffer even if its starting address
is 0, failing and causing an ugly backtrace in the process.  Exit before
probing if this is the case.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/efifb.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 0c5b9a9fd56..8dea2bc9270 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -210,12 +210,15 @@ static int __init efifb_probe(struct platform_device *dev)
 	unsigned int size_total;
 	int request_succeeded = 0;
 
-	printk(KERN_INFO "efifb: probing for efifb\n");
-
 	if (!screen_info.lfb_depth)
 		screen_info.lfb_depth = 32;
 	if (!screen_info.pages)
 		screen_info.pages = 1;
+	if (!screen_info.lfb_base) {
+		printk(KERN_DEBUG "efifb: invalid framebuffer address\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO "efifb: probing for efifb\n");
 
 	/* just assume they're all unset if any are */
 	if (!screen_info.blue_size) {
-- 
GitLab


From 251eb40f5ccd07a905633a816fbf8f2b6b25cced Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <jic23@cam.ac.uk>
Date: Mon, 13 Apr 2009 14:39:45 -0700
Subject: [PATCH 0113/1421] hwmon: sht15 humidity sensor driver

Data sheet at:
http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf

These sensors communicate over a 2 wire bus running a device specific
protocol.  The complexity of the driver is mainly due to handling the
substantial delays between requesting a reading and the device pulling the
data line low to indicate that the data is available.  This is handled by
an interrupt that is disabled under all other conditions.

I wasn't terribly clear on the best way to handle this, so comments on
that aspect would be particularly welcome!

Interpretation of the temperature depends on knowing the supply voltage.
If configured in a board config as a regulator consumer this is obtained
from the regulator subsystem.  If not it should be provided in the
platform data.

I've placed this driver in the hwmon subsystem as it is definitely a
device that may be used for hardware monitoring and with it's relatively
slow response times (up to 120 millisecs to get a reading) a caching
strategy certainly seems to make sense!

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/hwmon/Kconfig  |  10 +
 drivers/hwmon/Makefile |   1 +
 drivers/hwmon/sht15.c  | 692 +++++++++++++++++++++++++++++++++++++++++
 include/linux/sht15.h  |  24 ++
 4 files changed, 727 insertions(+)
 create mode 100644 drivers/hwmon/sht15.c
 create mode 100644 include/linux/sht15.h

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0e8a9185f67..d73f5f473e3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -692,6 +692,16 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
+config SENSORS_SHT15
+	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+	depends on GENERIC_GPIO
+	help
+	  If you say yes here you get support for the Sensiron SHT10, SHT11,
+	  SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sht15.
+
 config SENSORS_SIS5595
 	tristate "Silicon Integrated Systems Corp. SiS5595"
 	depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 1d3757837b4..0ae26984ba4 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
new file mode 100644
index 00000000000..6cbdc2fea73
--- /dev/null
+++ b/drivers/hwmon/sht15.c
@@ -0,0 +1,692 @@
+/*
+ * sht15.c - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently ignoring checksum on readings.
+ * Default resolution only (14bit temp, 12bit humidity)
+ * Ignoring battery status.
+ * Heater not enabled.
+ * Timings are all conservative.
+ *
+ * Data sheet available (1/2009) at
+ * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+ *
+ * Regulator supply name = vcc
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/sht15.h>
+#include <linux/regulator/consumer.h>
+#include <asm/atomic.h>
+
+#define SHT15_MEASURE_TEMP	3
+#define SHT15_MEASURE_RH	5
+
+#define SHT15_READING_NOTHING	0
+#define SHT15_READING_TEMP	1
+#define SHT15_READING_HUMID	2
+
+/* Min timings in nsecs */
+#define SHT15_TSCKL		100	/* clock low */
+#define SHT15_TSCKH		100	/* clock high */
+#define SHT15_TSU		150	/* data setup time */
+
+/**
+ * struct sht15_temppair - elements of voltage dependant temp calc
+ * @vdd:	supply voltage in microvolts
+ * @d1:		see data sheet
+ */
+struct sht15_temppair {
+	int vdd; /* microvolts */
+	int d1;
+};
+
+/* Table 9 from data sheet - relates temperature calculation
+ * to supply voltage.
+ */
+static const struct sht15_temppair temppoints[] = {
+	{ 2500000, -39400 },
+	{ 3000000, -39600 },
+	{ 3500000, -39700 },
+	{ 4000000, -39800 },
+	{ 5000000, -40100 },
+};
+
+/**
+ * struct sht15_data - device instance specific data
+ * @pdata:	platform data (gpio's etc)
+ * @read_work:	bh of interrupt handler
+ * @wait_queue:	wait queue for getting values from device
+ * @val_temp:	last temperature value read from device
+ * @val_humid: 	last humidity value read from device
+ * @flag:	status flag used to identify what the last request was
+ * @valid:	are the current stored values valid (start condition)
+ * @last_updat:	time of last update
+ * @read_lock:	mutex to ensure only one read in progress
+ *		at a time.
+ * @dev:	associate device structure
+ * @hwmon_dev:	device associated with hwmon subsystem
+ * @reg:	associated regulator (if specified)
+ * @nb:		notifier block to handle notifications of voltage changes
+ * @supply_uV:	local copy of supply voltage used to allow
+ *		use of regulator consumer if available
+ * @supply_uV_valid:   indicates that an updated value has not yet
+ *		been obtained from the regulator and so any calculations
+ *		based upon it will be invalid.
+ * @update_supply_work:	work struct that is used to update the supply_uV
+ * @interrupt_handled:	flag used to indicate a hander has been scheduled
+ */
+struct sht15_data {
+	struct sht15_platform_data	*pdata;
+	struct work_struct		read_work;
+	wait_queue_head_t		wait_queue;
+	uint16_t			val_temp;
+	uint16_t			val_humid;
+	u8				flag;
+	u8				valid;
+	unsigned long			last_updat;
+	struct mutex			read_lock;
+	struct device			*dev;
+	struct device			*hwmon_dev;
+	struct regulator		*reg;
+	struct notifier_block		nb;
+	int				supply_uV;
+	int				supply_uV_valid;
+	struct work_struct		update_supply_work;
+	atomic_t			interrupt_handled;
+};
+
+/**
+ * sht15_connection_reset() - reset the comms interface
+ * @data:	sht15 specific data
+ *
+ * This implements section 3.4 of the data sheet
+ */
+static void sht15_connection_reset(struct sht15_data *data)
+{
+	int i;
+	gpio_direction_output(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSCKL);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	for (i = 0; i < 9; ++i) {
+		gpio_set_value(data->pdata->gpio_sck, 1);
+		ndelay(SHT15_TSCKH);
+		gpio_set_value(data->pdata->gpio_sck, 0);
+		ndelay(SHT15_TSCKL);
+	}
+}
+/**
+ * sht15_send_bit() - send an individual bit to the device
+ * @data:	device state data
+ * @val:	value of bit to be sent
+ **/
+static inline void sht15_send_bit(struct sht15_data *data, int val)
+{
+
+	gpio_set_value(data->pdata->gpio_data, val);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL); /* clock low time */
+}
+
+/**
+ * sht15_transmission_start() - specific sequence for new transmission
+ *
+ * @data:	device state data
+ * Timings for this are not documented on the data sheet, so very
+ * conservative ones used in implementation. This implements
+ * figure 12 on the data sheet.
+ **/
+static void sht15_transmission_start(struct sht15_data *data)
+{
+	/* ensure data is high and output */
+	gpio_direction_output(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_data, 0);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+}
+/**
+ * sht15_send_byte() - send a single byte to the device
+ * @data:	device state
+ * @byte:	value to be sent
+ **/
+static void sht15_send_byte(struct sht15_data *data, u8 byte)
+{
+	int i;
+	for (i = 0; i < 8; i++) {
+		sht15_send_bit(data, !!(byte & 0x80));
+		byte <<= 1;
+	}
+}
+/**
+ * sht15_wait_for_response() - checks for ack from device
+ * @data:	device state
+ **/
+static int sht15_wait_for_response(struct sht15_data *data)
+{
+	gpio_direction_input(data->pdata->gpio_data);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	if (gpio_get_value(data->pdata->gpio_data)) {
+		gpio_set_value(data->pdata->gpio_sck, 0);
+		dev_err(data->dev, "Command not acknowledged\n");
+		sht15_connection_reset(data);
+		return -EIO;
+	}
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+	return 0;
+}
+
+/**
+ * sht15_send_cmd() - Sends a command to the device.
+ * @data:	device state
+ * @cmd:	command byte to be sent
+ *
+ * On entry, sck is output low, data is output pull high
+ * and the interrupt disabled.
+ **/
+static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
+{
+	int ret = 0;
+	sht15_transmission_start(data);
+	sht15_send_byte(data, cmd);
+	ret = sht15_wait_for_response(data);
+	return ret;
+}
+/**
+ * sht15_update_single_val() - get a new value from device
+ * @data:		device instance specific data
+ * @command:		command sent to request value
+ * @timeout_msecs:	timeout after which comms are assumed
+ *			to have failed are reset.
+ **/
+static inline int sht15_update_single_val(struct sht15_data *data,
+					  int command,
+					  int timeout_msecs)
+{
+	int ret;
+	ret = sht15_send_cmd(data, command);
+	if (ret)
+		return ret;
+
+	gpio_direction_input(data->pdata->gpio_data);
+	atomic_set(&data->interrupt_handled, 0);
+
+	enable_irq(gpio_to_irq(data->pdata->gpio_data));
+	if (gpio_get_value(data->pdata->gpio_data) == 0) {
+		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+		/* Only relevant if the interrupt hasn't occured. */
+		if (!atomic_read(&data->interrupt_handled))
+			schedule_work(&data->read_work);
+	}
+	ret = wait_event_timeout(data->wait_queue,
+				 (data->flag == SHT15_READING_NOTHING),
+				 msecs_to_jiffies(timeout_msecs));
+	if (ret == 0) {/* timeout occurred */
+		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+		sht15_connection_reset(data);
+		return -ETIME;
+	}
+	return 0;
+}
+
+/**
+ * sht15_update_vals() - get updated readings from device if too old
+ * @data:	device state
+ **/
+static int sht15_update_vals(struct sht15_data *data)
+{
+	int ret = 0;
+	int timeout = HZ;
+
+	mutex_lock(&data->read_lock);
+	if (time_after(jiffies, data->last_updat + timeout)
+	    || !data->valid) {
+		data->flag = SHT15_READING_HUMID;
+		ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160);
+		if (ret)
+			goto error_ret;
+		data->flag = SHT15_READING_TEMP;
+		ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400);
+		if (ret)
+			goto error_ret;
+		data->valid = 1;
+		data->last_updat = jiffies;
+	}
+error_ret:
+	mutex_unlock(&data->read_lock);
+
+	return ret;
+}
+
+/**
+ * sht15_calc_temp() - convert the raw reading to a temperature
+ * @data:	device state
+ *
+ * As per section 4.3 of the data sheet.
+ **/
+static inline int sht15_calc_temp(struct sht15_data *data)
+{
+	int d1 = 0;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+		/* Find pointer to interpolate */
+		if (data->supply_uV > temppoints[i - 1].vdd) {
+			d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+				* (temppoints[i].d1 - temppoints[i - 1].d1)
+				/ (temppoints[i].vdd - temppoints[i - 1].vdd)
+				+ temppoints[i - 1].d1;
+			break;
+		}
+
+	return data->val_temp*10 + d1;
+}
+
+/**
+ * sht15_calc_humid() - using last temperature convert raw to humid
+ * @data:	device state
+ *
+ * This is the temperature compensated version as per section 4.2 of
+ * the data sheet.
+ **/
+static inline int sht15_calc_humid(struct sht15_data *data)
+{
+	int RHlinear; /* milli percent */
+	int temp = sht15_calc_temp(data);
+
+	const int c1 = -4;
+	const int c2 = 40500; /* x 10 ^ -6 */
+	const int c3 = 2800; /* x10 ^ -9 */
+
+	RHlinear = c1*1000
+		+ c2 * data->val_humid/1000
+		+ (data->val_humid * data->val_humid * c3)/1000000;
+	return (temp - 25000) * (10000 + 800 * data->val_humid)
+		/ 1000000 + RHlinear;
+}
+
+static ssize_t sht15_show_temp(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	int ret;
+	struct sht15_data *data = dev_get_drvdata(dev);
+
+	/* Technically no need to read humidity as well */
+	ret = sht15_update_vals(data);
+
+	return ret ? ret : sprintf(buf, "%d\n",
+				   sht15_calc_temp(data));
+}
+
+static ssize_t sht15_show_humidity(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	int ret;
+	struct sht15_data *data = dev_get_drvdata(dev);
+
+	ret = sht15_update_vals(data);
+
+	return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
+
+};
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr,
+			 char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	return sprintf(buf, "%s\n", pdev->name);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input,
+			  S_IRUGO, sht15_show_temp,
+			  NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input,
+			  S_IRUGO, sht15_show_humidity,
+			  NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct attribute *sht15_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_humidity1_input.dev_attr.attr,
+	&dev_attr_name.attr,
+	NULL,
+};
+
+static const struct attribute_group sht15_attr_group = {
+	.attrs = sht15_attrs,
+};
+
+static irqreturn_t sht15_interrupt_fired(int irq, void *d)
+{
+	struct sht15_data *data = d;
+	/* First disable the interrupt */
+	disable_irq_nosync(irq);
+	atomic_inc(&data->interrupt_handled);
+	/* Then schedule a reading work struct */
+	if (data->flag != SHT15_READING_NOTHING)
+		schedule_work(&data->read_work);
+	return IRQ_HANDLED;
+}
+
+/* Each byte of data is acknowledged by pulling the data line
+ * low for one clock pulse.
+ */
+static void sht15_ack(struct sht15_data *data)
+{
+	gpio_direction_output(data->pdata->gpio_data, 0);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_data, 1);
+
+	gpio_direction_input(data->pdata->gpio_data);
+}
+/**
+ * sht15_end_transmission() - notify device of end of transmission
+ * @data:	device state
+ *
+ * This is basically a NAK. (single clock pulse, data high)
+ **/
+static void sht15_end_transmission(struct sht15_data *data)
+{
+	gpio_direction_output(data->pdata->gpio_data, 1);
+	ndelay(SHT15_TSU);
+	gpio_set_value(data->pdata->gpio_sck, 1);
+	ndelay(SHT15_TSCKH);
+	gpio_set_value(data->pdata->gpio_sck, 0);
+	ndelay(SHT15_TSCKL);
+}
+
+static void sht15_bh_read_data(struct work_struct *work_s)
+{
+	int i;
+	uint16_t val = 0;
+	struct sht15_data *data
+		= container_of(work_s, struct sht15_data,
+			       read_work);
+	/* Firstly, verify the line is low */
+	if (gpio_get_value(data->pdata->gpio_data)) {
+		/* If not, then start the interrupt again - care
+		   here as could have gone low in meantime so verify
+		   it hasn't!
+		*/
+		atomic_set(&data->interrupt_handled, 0);
+		enable_irq(gpio_to_irq(data->pdata->gpio_data));
+		/* If still not occured or another handler has been scheduled */
+		if (gpio_get_value(data->pdata->gpio_data)
+		    || atomic_read(&data->interrupt_handled))
+			return;
+	}
+	/* Read the data back from the device */
+	for (i = 0; i < 16; ++i) {
+		val <<= 1;
+		gpio_set_value(data->pdata->gpio_sck, 1);
+		ndelay(SHT15_TSCKH);
+		val |= !!gpio_get_value(data->pdata->gpio_data);
+		gpio_set_value(data->pdata->gpio_sck, 0);
+		ndelay(SHT15_TSCKL);
+		if (i == 7)
+			sht15_ack(data);
+	}
+	/* Tell the device we are done */
+	sht15_end_transmission(data);
+
+	switch (data->flag) {
+	case SHT15_READING_TEMP:
+		data->val_temp = val;
+		break;
+	case SHT15_READING_HUMID:
+		data->val_humid = val;
+		break;
+	}
+
+	data->flag = SHT15_READING_NOTHING;
+	wake_up(&data->wait_queue);
+}
+
+static void sht15_update_voltage(struct work_struct *work_s)
+{
+	struct sht15_data *data
+		= container_of(work_s, struct sht15_data,
+			       update_supply_work);
+	data->supply_uV = regulator_get_voltage(data->reg);
+}
+
+/**
+ * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
+ * @nb:		associated notification structure
+ * @event:	voltage regulator state change event code
+ * @ignored:	function parameter - ignored here
+ *
+ * Note that as the notification code holds the regulator lock, we have
+ * to schedule an update of the supply voltage rather than getting it directly.
+ **/
+static int sht15_invalidate_voltage(struct notifier_block *nb,
+				unsigned long event,
+				void *ignored)
+{
+	struct sht15_data *data = container_of(nb, struct sht15_data, nb);
+
+	if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
+		data->supply_uV_valid = false;
+	schedule_work(&data->update_supply_work);
+
+	return NOTIFY_OK;
+}
+
+static int __devinit sht15_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+	if (!data) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "kzalloc failed");
+		goto error_ret;
+	}
+
+	INIT_WORK(&data->read_work, sht15_bh_read_data);
+	INIT_WORK(&data->update_supply_work, sht15_update_voltage);
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->read_lock);
+	data->dev = &pdev->dev;
+	init_waitqueue_head(&data->wait_queue);
+
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "no platform data supplied");
+		goto err_free_data;
+	}
+	data->pdata = pdev->dev.platform_data;
+	data->supply_uV = data->pdata->supply_mv*1000;
+
+/* If a regulator is available, query what the supply voltage actually is!*/
+	data->reg = regulator_get(data->dev, "vcc");
+	if (!IS_ERR(data->reg)) {
+		data->supply_uV = regulator_get_voltage(data->reg);
+		regulator_enable(data->reg);
+		/* setup a notifier block to update this if another device
+		 *  causes the voltage to change */
+		data->nb.notifier_call = &sht15_invalidate_voltage;
+		ret = regulator_register_notifier(data->reg, &data->nb);
+	}
+/* Try requesting the GPIOs */
+	ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
+	if (ret) {
+		dev_err(&pdev->dev, "gpio request failed");
+		goto err_free_data;
+	}
+	gpio_direction_output(data->pdata->gpio_sck, 0);
+	ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
+	if (ret) {
+		dev_err(&pdev->dev, "gpio request failed");
+		goto err_release_gpio_sck;
+	}
+	ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs create failed");
+		goto err_free_data;
+	}
+
+	ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
+			  sht15_interrupt_fired,
+			  IRQF_TRIGGER_FALLING,
+			  "sht15 data",
+			  data);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get irq for data line");
+		goto err_release_gpio_data;
+	}
+	disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+	sht15_connection_reset(data);
+	sht15_send_cmd(data, 0x1E);
+
+	data->hwmon_dev = hwmon_device_register(data->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto err_release_gpio_data;
+	}
+	return 0;
+
+err_release_gpio_data:
+	gpio_free(data->pdata->gpio_data);
+err_release_gpio_sck:
+	gpio_free(data->pdata->gpio_sck);
+err_free_data:
+	kfree(data);
+error_ret:
+
+	return ret;
+}
+
+static int __devexit sht15_remove(struct platform_device *pdev)
+{
+	struct sht15_data *data = platform_get_drvdata(pdev);
+
+	/* Make sure any reads from the device are done and
+	 * prevent new ones beginnning */
+	mutex_lock(&data->read_lock);
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+	if (!IS_ERR(data->reg)) {
+		regulator_unregister_notifier(data->reg, &data->nb);
+		regulator_disable(data->reg);
+		regulator_put(data->reg);
+	}
+
+	free_irq(gpio_to_irq(data->pdata->gpio_data), data);
+	gpio_free(data->pdata->gpio_data);
+	gpio_free(data->pdata->gpio_sck);
+	mutex_unlock(&data->read_lock);
+	kfree(data);
+	return 0;
+}
+
+
+static struct platform_driver sht_drivers[] = {
+	{
+		.driver = {
+			.name = "sht10",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht11",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht15",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht71",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	}, {
+		.driver = {
+			.name = "sht75",
+			.owner = THIS_MODULE,
+		},
+		.probe = sht15_probe,
+		.remove = sht15_remove,
+	},
+};
+
+
+static int __init sht15_init(void)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
+		ret = platform_driver_register(&sht_drivers[i]);
+		if (ret)
+			goto error_unreg;
+	}
+
+	return 0;
+
+error_unreg:
+	while (--i >= 0)
+		platform_driver_unregister(&sht_drivers[i]);
+
+	return ret;
+}
+module_init(sht15_init);
+
+static void __exit sht15_exit(void)
+{
+	int i;
+	for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
+		platform_driver_unregister(&sht_drivers[i]);
+}
+module_exit(sht15_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/include/linux/sht15.h b/include/linux/sht15.h
new file mode 100644
index 00000000000..046bce05eca
--- /dev/null
+++ b/include/linux/sht15.h
@@ -0,0 +1,24 @@
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data:	no. of gpio to which bidirectional data line is connected
+ * @gpio_sck:	no. of gpio to which the data clock is connected.
+ * @supply_mv:	supply voltage in mv. Overridden by regulator if available.
+ **/
+struct sht15_platform_data {
+	int gpio_data;
+	int gpio_sck;
+	int supply_mv;
+};
+
-- 
GitLab


From eb2e5f452a1456c7a20f7566a24d5a8f6ef3edd5 Mon Sep 17 00:00:00 2001
From: Dave Anderson <anderson@redhat.com>
Date: Mon, 13 Apr 2009 14:39:46 -0700
Subject: [PATCH 0114/1421] hfs: fix memory leak when unmounting

When an HFS filesystem is unmounted, it leaks a 2-page bitmap.  Also,
under extreme memory pressure, it's possible that hfs_releasepage() may
use a tree pointer that has not been initialized, and if so, the release
request should just be rejected.

[akpm@linux-foundation.org: free_pages(0) is legal, remove obvious comment]
Signed-off-by: Dave Anderson <anderson@redhat.com>
Tested-by: Eugene Teo <eugeneteo@kernel.sg>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hfs/inode.c | 4 ++++
 fs/hfs/mdb.c   | 1 +
 2 files changed, 5 insertions(+)

diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 9435dda8f1e..a1cbff2b4d9 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -70,6 +70,10 @@ static int hfs_releasepage(struct page *page, gfp_t mask)
 		BUG();
 		return 0;
 	}
+
+	if (!tree)
+		return 0;
+
 	if (tree->node_size >= PAGE_CACHE_SIZE) {
 		nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
 		spin_lock(&tree->hash_lock);
diff --git a/fs/hfs/mdb.c b/fs/hfs/mdb.c
index 36ca2e1a4fa..7b6165f25fb 100644
--- a/fs/hfs/mdb.c
+++ b/fs/hfs/mdb.c
@@ -349,6 +349,7 @@ void hfs_mdb_put(struct super_block *sb)
 	if (HFS_SB(sb)->nls_disk)
 		unload_nls(HFS_SB(sb)->nls_disk);
 
+	free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
 	kfree(HFS_SB(sb));
 	sb->s_fs_info = NULL;
 }
-- 
GitLab


From 17a5138d204014b00cb9c1d6e8ff311993041b5c Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 13 Apr 2009 14:39:47 -0700
Subject: [PATCH 0115/1421] aio: remove INIT_KIOCTX

Unused after 20dcae32439384b6863c626bb3b2a09bed65b33e aka
"[PATCH] aio: remove kioctx from mm_struct".

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/init_task.h | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index dcfb93337e9..d87247d2641 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -15,19 +15,6 @@
 extern struct files_struct init_files;
 extern struct fs_struct init_fs;
 
-#define INIT_KIOCTX(name, which_mm) \
-{							\
-	.users		= ATOMIC_INIT(1),		\
-	.dead		= 0,				\
-	.mm		= &which_mm,			\
-	.user_id	= 0,				\
-	.next		= NULL,				\
-	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
-	.ctx_lock	= __SPIN_LOCK_UNLOCKED(name.ctx_lock), \
-	.reqs_active	= 0U,				\
-	.max_reqs	= ~0U,				\
-}
-
 #define INIT_MM(name) \
 {			 					\
 	.mm_rb		= RB_ROOT,				\
-- 
GitLab


From f26ec5baa67524b00311b8ec4626efc0a95925e1 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Mon, 13 Apr 2009 14:39:48 -0700
Subject: [PATCH 0116/1421] namespaces: move get_mq() inside #ifdef
 CONFIG_SYSCTL

| ipc/mq_sysctl.c:26: warning: 'get_mq' defined but not used

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 ipc/mq_sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index 89f60ec8ee5..24ae46dfe45 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -22,6 +22,7 @@
 #define MIN_MSGSIZEMAX	128		/* min value for msgsize_max */
 #define MAX_MSGSIZEMAX	(8192*128)	/* max value for msgsize_max */
 
+#ifdef CONFIG_PROC_SYSCTL
 static void *get_mq(ctl_table *table)
 {
 	char *which = table->data;
@@ -30,7 +31,6 @@ static void *get_mq(ctl_table *table)
 	return which;
 }
 
-#ifdef CONFIG_PROC_SYSCTL
 static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
 	void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-- 
GitLab


From c26d7b29d9989cfd9004e688ad517925b0db37d0 Mon Sep 17 00:00:00 2001
From: Michal Januszewski <spock@gentoo.org>
Date: Mon, 13 Apr 2009 14:39:49 -0700
Subject: [PATCH 0117/1421] s3fb: fix color component length for pseudocolor
 modes

s3fb incorrectly sets the length of the color fields to 6 bits for
PSEUDOCOLOR modes, even though 8 or 4 bits are used per pixel.  Fix this
by setting the length to 8 or 4, respectively.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/s3fb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 4dcec48a1d7..c3fad34309e 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -45,11 +45,11 @@ struct s3fb_info {
 static const struct svga_fb_format s3fb_formats[] = {
 	{ 0,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 0,
 		FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4,	FB_VISUAL_PSEUDOCOLOR, 8, 16},
-	{ 4,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 0,
+	{ 4,  {0, 4, 0},  {0, 4, 0},  {0, 4, 0}, {0, 0, 0}, 0,
 		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_PSEUDOCOLOR, 8, 16},
-	{ 4,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 1,
+	{ 4,  {0, 4, 0},  {0, 4, 0},  {0, 4, 0}, {0, 0, 0}, 1,
 		FB_TYPE_INTERLEAVED_PLANES, 1,		FB_VISUAL_PSEUDOCOLOR, 8, 16},
-	{ 8,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 0,
+	{ 8,  {0, 8, 0},  {0, 8, 0},  {0, 8, 0}, {0, 0, 0}, 0,
 		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_PSEUDOCOLOR, 4, 8},
 	{16,  {10, 5, 0}, {5, 5, 0},  {0, 5, 0}, {0, 0, 0}, 0,
 		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_TRUECOLOR, 2, 4},
-- 
GitLab


From 0a4534801468325fdb6a7b7bf73ad2a958a1e379 Mon Sep 17 00:00:00 2001
From: Michal Januszewski <spock@gentoo.org>
Date: Mon, 13 Apr 2009 14:39:51 -0700
Subject: [PATCH 0118/1421] sa1100fb: fix color component length for
 pseudocolor modes

sa1100fb incorrectly sets the length of the color fields to 8 bits for
PSEUDOCOLOR modes for which only 4 bits are used per pixel.  Fix this by
setting the length to 4 bits for these modes.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sa1100fb.c | 15 ++++++++++-----
 drivers/video/sa1100fb.h |  7 ++++---
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index fad58cf9ef7..10ddad8e17d 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -199,16 +199,20 @@
 extern void (*sa1100fb_backlight_power)(int on);
 extern void (*sa1100fb_lcd_power)(int on);
 
-/*
- * IMHO this looks wrong.  In 8BPP, length should be 8.
- */
-static struct sa1100fb_rgb rgb_8 = {
+static struct sa1100fb_rgb rgb_4 = {
 	.red	= { .offset = 0,  .length = 4, },
 	.green	= { .offset = 0,  .length = 4, },
 	.blue	= { .offset = 0,  .length = 4, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
+static struct sa1100fb_rgb rgb_8 = {
+	.red	= { .offset = 0,  .length = 8, },
+	.green	= { .offset = 0,  .length = 8, },
+	.blue	= { .offset = 0,  .length = 8, },
+	.transp	= { .offset = 0,  .length = 0, },
+};
+
 static struct sa1100fb_rgb def_rgb_16 = {
 	.red	= { .offset = 11, .length = 5, },
 	.green	= { .offset = 5,  .length = 6, },
@@ -613,7 +617,7 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
 	switch (var->bits_per_pixel) {
 	case 4:
-		rgbidx = RGB_8;
+		rgbidx = RGB_4;
 		break;
 	case 8:
 		rgbidx = RGB_8;
@@ -1382,6 +1386,7 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 	fbi->fb.monspecs	= monspecs;
 	fbi->fb.pseudo_palette	= (fbi + 1);
 
+	fbi->rgb[RGB_4]		= &rgb_4;
 	fbi->rgb[RGB_8]		= &rgb_8;
 	fbi->rgb[RGB_16]	= &def_rgb_16;
 
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 86831db9a04..1c3b459865d 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -57,9 +57,10 @@ struct sa1100fb_lcd_reg {
 	unsigned long lccr3;
 };
 
-#define RGB_8	(0)
-#define RGB_16	(1)
-#define NR_RGB	2
+#define RGB_4	(0)
+#define RGB_8	(1)
+#define RGB_16	(2)
+#define NR_RGB	3
 
 struct sa1100fb_info {
 	struct fb_info		fb;
-- 
GitLab


From 811a201374b10d60662504f9ea533e03914fdb27 Mon Sep 17 00:00:00 2001
From: Michal Januszewski <spock@gentoo.org>
Date: Mon, 13 Apr 2009 14:39:52 -0700
Subject: [PATCH 0119/1421] sisfb: fix color component length for pseudocolor
 modes

sisfb incorrectly sets the length of the color fields to 6 bits
for PSEUDOCOLOR modes, even though 8 bits are always used per pixel.
Fix this by setting the length to 8.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sis/sis_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 346d6458cf7..7e17ee95a97 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1129,7 +1129,7 @@ sisfb_bpp_to_var(struct sis_video_info *ivideo, struct fb_var_screeninfo *var)
 	switch(var->bits_per_pixel) {
 	case 8:
 		var->red.offset = var->green.offset = var->blue.offset = 0;
-		var->red.length = var->green.length = var->blue.length = 6;
+		var->red.length = var->green.length = var->blue.length = 8;
 		break;
 	case 16:
 		var->red.offset = 11;
-- 
GitLab


From 3e6210195c4e1157159779b7c700ba76f4546421 Mon Sep 17 00:00:00 2001
From: Paul Menzel <paulepanter@users.sourceforge.net>
Date: Mon, 13 Apr 2009 14:39:53 -0700
Subject: [PATCH 0120/1421] drivers/video/aty/radeon_base.c: fix typo in
 comment

Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/radeon_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 16bb7e3c031..6c37e8ee5ef 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -698,8 +698,8 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo)
 found:
 	/*
 	 * Some methods fail to retrieve SCLK and MCLK values, we apply default
-	 * settings in this case (200Mhz). If that really happne often, we could
-	 * fetch from registers instead...
+	 * settings in this case (200Mhz). If that really happens often, we
+	 * could fetch from registers instead...
 	 */
 	if (rinfo->pll.mclk == 0)
 		rinfo->pll.mclk = 20000;
-- 
GitLab


From 5dec8bfbdd4921522565a7b0e0c8760ae042ef6d Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@redhat.com>
Date: Mon, 13 Apr 2009 14:39:54 -0700
Subject: [PATCH 0121/1421] include/linux/fiemap.h: include types.h now that
 it's exported

Include <linux/types.h> in fiemap.h.  Sam Ravnborg pointed out that this
was missing in this newly-exported header which uses the __u32 and __u64
types.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/fiemap.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h
index 671decbd2ae..934e22d6580 100644
--- a/include/linux/fiemap.h
+++ b/include/linux/fiemap.h
@@ -11,6 +11,8 @@
 #ifndef _LINUX_FIEMAP_H
 #define _LINUX_FIEMAP_H
 
+#include <linux/types.h>
+
 struct fiemap_extent {
 	__u64 fe_logical;  /* logical offset in bytes for the start of
 			    * the extent from the beginning of the file */
-- 
GitLab


From 697f619fc87aa9bf5b6c8c756f7ea54e950d5cd5 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 13 Apr 2009 14:39:54 -0700
Subject: [PATCH 0122/1421] filemap: fix kernel-doc warnings

Fix filemap.c kernel-doc warnings:

Warning(mm/filemap.c:575): No description found for parameter 'page'
Warning(mm/filemap.c:575): No description found for parameter 'waiter'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/filemap.c b/mm/filemap.c
index 2e2d38ebda4..8bd498040f3 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -567,8 +567,8 @@ EXPORT_SYMBOL(wait_on_page_bit);
 
 /**
  * add_page_wait_queue - Add an arbitrary waiter to a page's wait queue
- * @page - Page defining the wait queue of interest
- * @waiter - Waiter to add to the queue
+ * @page: Page defining the wait queue of interest
+ * @waiter: Waiter to add to the queue
  *
  * Add an arbitrary @waiter to the wait queue for the nominated @page.
  */
-- 
GitLab


From 0efb2a03af7eddadb4d0db5f855b1614ba9b0a00 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Mon, 13 Apr 2009 14:39:55 -0700
Subject: [PATCH 0123/1421] cirrusfb: do not allow unsupported pixel depth

Do not allow modes with unsupported pixel depth.  Otherwise, one can hang
a computer by setting incorrect value with fbset command.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/cirrusfb.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index d42e385f091..4c2bf923418 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -567,9 +567,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 	default:
 		dev_dbg(info->device,
 			"Unsupported bpp size: %d\n", var->bits_per_pixel);
-		assert(false);
-		/* should never occur */
-		break;
+		return -EINVAL;
 	}
 
 	if (var->xres_virtual < var->xres)
-- 
GitLab


From 0769c2981495c3d05429840d6fc7a1b5e26accaa Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Mon, 13 Apr 2009 14:39:56 -0700
Subject: [PATCH 0124/1421] asm-generic/siginfo.h: update NSIGTRAP definition

Impact: (nearly) trivial

The patch

commit da654b74bda14c45a7d98c731bf3c1a43b6b74e2
Author: Srinivasa Ds <srinivasa@in.ibm.com>
Date:   Tue Sep 23 15:23:52 2008 +0530

    signals: demultiplexing SIGTRAP signal

forgot to update the NSIGTRAP define in asm-generic/siginfo.h to the new
number of sigtrap subcodes.  Nothing in the tree seems to use it, but
presumably something in user space might.  So update it.

Cc: Srinivasa Ds <srinivasa@in.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/siginfo.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h
index 35752dadd6d..c840719a8c5 100644
--- a/include/asm-generic/siginfo.h
+++ b/include/asm-generic/siginfo.h
@@ -201,7 +201,7 @@ typedef struct siginfo {
 #define TRAP_TRACE	(__SI_FAULT|2)	/* process trace trap */
 #define TRAP_BRANCH     (__SI_FAULT|3)  /* process taken branch trap */
 #define TRAP_HWBKPT     (__SI_FAULT|4)  /* hardware breakpoint/watchpoint */
-#define NSIGTRAP	2
+#define NSIGTRAP	4
 
 /*
  * SIGCHLD si_codes
-- 
GitLab


From bdff549ebeff92b1a6952e5501caf16a6f8898c8 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Mon, 13 Apr 2009 14:39:57 -0700
Subject: [PATCH 0125/1421] spi: spi_write_then_read() bugfixes

The "simplify spi_write_then_read()" patch included two regressions from
the 2.6.27 behaviors:

 - The data it wrote out during the (full duplex) read side
   of the transfer was not zeroed.

 - It fails completely on half duplex hardware, such as
   Microwire and most "3-wire" SPI variants.

So, revert that patch.  A revised version should be submitted at some
point, which can get the speedup on standard hardware (full duplex)
without breaking on less-capable half-duplex stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org>		[2.6.28.x, 2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spi.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 643908b74bc..8eba98c8ed1 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -658,7 +658,7 @@ int spi_write_then_read(struct spi_device *spi,
 
 	int			status;
 	struct spi_message	message;
-	struct spi_transfer	x;
+	struct spi_transfer	x[2];
 	u8			*local_buf;
 
 	/* Use preallocated DMA-safe buffer.  We can't avoid copying here,
@@ -669,9 +669,15 @@ int spi_write_then_read(struct spi_device *spi,
 		return -EINVAL;
 
 	spi_message_init(&message);
-	memset(&x, 0, sizeof x);
-	x.len = n_tx + n_rx;
-	spi_message_add_tail(&x, &message);
+	memset(x, 0, sizeof x);
+	if (n_tx) {
+		x[0].len = n_tx;
+		spi_message_add_tail(&x[0], &message);
+	}
+	if (n_rx) {
+		x[1].len = n_rx;
+		spi_message_add_tail(&x[1], &message);
+	}
 
 	/* ... unless someone else is using the pre-allocated buffer */
 	if (!mutex_trylock(&lock)) {
@@ -682,15 +688,15 @@ int spi_write_then_read(struct spi_device *spi,
 		local_buf = buf;
 
 	memcpy(local_buf, txbuf, n_tx);
-	x.tx_buf = local_buf;
-	x.rx_buf = local_buf;
+	x[0].tx_buf = local_buf;
+	x[1].rx_buf = local_buf + n_tx;
 
 	/* do the i/o */
 	status = spi_sync(spi, &message);
 	if (status == 0)
-		memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+		memcpy(rxbuf, x[1].rx_buf, n_rx);
 
-	if (x.tx_buf == buf)
+	if (x[0].tx_buf == buf)
 		mutex_unlock(&lock);
 	else
 		kfree(local_buf);
-- 
GitLab


From 5341cfab94ec05b8a45726f9fe15e71c0cd9b915 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Mon, 13 Apr 2009 14:39:58 -0700
Subject: [PATCH 0126/1421] res_counter: update documentation

After the introduction of resource counters hierarchies
(28dbc4b6a01fb579a9441c7b81e3d3413dc452df) the prototypes of
res_counter_init() and res_counter_charge() have been changed.

Keep the documentation consistent with the actual function prototypes.

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/cgroups/resource_counter.txt | 27 +++++++++++++++++-----
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/Documentation/cgroups/resource_counter.txt b/Documentation/cgroups/resource_counter.txt
index f196ac1d7d2..95b24d766ea 100644
--- a/Documentation/cgroups/resource_counter.txt
+++ b/Documentation/cgroups/resource_counter.txt
@@ -47,13 +47,18 @@ to work with it.
 
 2. Basic accounting routines
 
- a. void res_counter_init(struct res_counter *rc)
+ a. void res_counter_init(struct res_counter *rc,
+				struct res_counter *rc_parent)
 
  	Initializes the resource counter. As usual, should be the first
 	routine called for a new counter.
 
- b. int res_counter_charge[_locked]
-			(struct res_counter *rc, unsigned long val)
+	The struct res_counter *parent can be used to define a hierarchical
+	child -> parent relationship directly in the res_counter structure,
+	NULL can be used to define no relationship.
+
+ c. int res_counter_charge(struct res_counter *rc, unsigned long val,
+				struct res_counter **limit_fail_at)
 
 	When a resource is about to be allocated it has to be accounted
 	with the appropriate resource counter (controller should determine
@@ -67,15 +72,25 @@ to work with it.
 	  * if the charging is performed first, then it should be uncharged
 	    on error path (if the one is called).
 
- c. void res_counter_uncharge[_locked]
+	If the charging fails and a hierarchical dependency exists, the
+	limit_fail_at parameter is set to the particular res_counter element
+	where the charging failed.
+
+ d. int res_counter_charge_locked
+			(struct res_counter *rc, unsigned long val)
+
+	The same as res_counter_charge(), but it must not acquire/release the
+	res_counter->lock internally (it must be called with res_counter->lock
+	held).
+
+ e. void res_counter_uncharge[_locked]
 			(struct res_counter *rc, unsigned long val)
 
 	When a resource is released (freed) it should be de-accounted
 	from the resource counter it was accounted to.  This is called
 	"uncharging".
 
-    The _locked routines imply that the res_counter->lock is taken.
-
+	The _locked routines imply that the res_counter->lock is taken.
 
  2.1 Other accounting routines
 
-- 
GitLab


From 1faca76fad20435328e6ffd7d852022097c94fa4 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 13 Apr 2009 14:39:59 -0700
Subject: [PATCH 0127/1421] include/video/cyblafb.h: remove it, it's unused

commit ddb53d48da5b0e691f35e703ac29118747f86c99 ("fbdev: remove cyblafb
driver") removed drivers/video/cyblafb.c, but not its .h file

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/video/cyblafb.h | 175 ----------------------------------------
 1 file changed, 175 deletions(-)
 delete mode 100644 include/video/cyblafb.h

diff --git a/include/video/cyblafb.h b/include/video/cyblafb.h
deleted file mode 100644
index d3c1d4e2c8e..00000000000
--- a/include/video/cyblafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-
-#ifndef CYBLAFB_DEBUG
-#define CYBLAFB_DEBUG 0
-#endif
-
-#if CYBLAFB_DEBUG
-#define debug(f,a...)	printk("%s:" f,  __func__ , ## a);
-#else
-#define debug(f,a...)
-#endif
-
-#define output(f, a...) printk("cyblafb: " f, ## a)
-
-#define Kb	(1024)
-#define Mb	(Kb*Kb)
-
-/* PCI IDS of supported cards temporarily here */
-
-#define CYBERBLADEi1	0x8500
-
-/* these defines are for 'lcd' variable */
-#define LCD_STRETCH	0
-#define LCD_CENTER	1
-#define LCD_BIOS	2
-
-/* display types */
-#define DISPLAY_CRT	0
-#define DISPLAY_FP	1
-
-#define ROP_S	0xCC
-
-#define point(x,y) ((y)<<16|(x))
-
-//
-// Attribute Regs, ARxx, 3c0/3c1
-//
-#define AR00	0x00
-#define AR01	0x01
-#define AR02	0x02
-#define AR03	0x03
-#define AR04	0x04
-#define AR05	0x05
-#define AR06	0x06
-#define AR07	0x07
-#define AR08	0x08
-#define AR09	0x09
-#define AR0A	0x0A
-#define AR0B	0x0B
-#define AR0C	0x0C
-#define AR0D	0x0D
-#define AR0E	0x0E
-#define AR0F	0x0F
-#define AR10	0x10
-#define AR12	0x12
-#define AR13	0x13
-
-//
-// Sequencer Regs, SRxx, 3c4/3c5
-//
-#define SR00	0x00
-#define SR01	0x01
-#define SR02	0x02
-#define SR03	0x03
-#define SR04	0x04
-#define SR0D	0x0D
-#define SR0E	0x0E
-#define SR11	0x11
-#define SR18	0x18
-#define SR19	0x19
-
-//
-//
-//
-#define CR00	0x00
-#define CR01	0x01
-#define CR02	0x02
-#define CR03	0x03
-#define CR04	0x04
-#define CR05	0x05
-#define CR06	0x06
-#define CR07	0x07
-#define CR08	0x08
-#define CR09	0x09
-#define CR0A	0x0A
-#define CR0B	0x0B
-#define CR0C	0x0C
-#define CR0D	0x0D
-#define CR0E	0x0E
-#define CR0F	0x0F
-#define CR10	0x10
-#define CR11	0x11
-#define CR12	0x12
-#define CR13	0x13
-#define CR14	0x14
-#define CR15	0x15
-#define CR16	0x16
-#define CR17	0x17
-#define CR18	0x18
-#define CR19	0x19
-#define CR1A	0x1A
-#define CR1B	0x1B
-#define CR1C	0x1C
-#define CR1D	0x1D
-#define CR1E	0x1E
-#define CR1F	0x1F
-#define CR20	0x20
-#define CR21	0x21
-#define CR27	0x27
-#define CR29	0x29
-#define CR2A	0x2A
-#define CR2B	0x2B
-#define CR2D	0x2D
-#define CR2F	0x2F
-#define CR36	0x36
-#define CR38	0x38
-#define CR39	0x39
-#define CR3A	0x3A
-#define CR55	0x55
-#define CR56	0x56
-#define CR57	0x57
-#define CR58	0x58
-
-//
-//
-//
-
-#define GR00	0x01
-#define GR01	0x01
-#define GR02	0x02
-#define GR03	0x03
-#define GR04	0x04
-#define GR05	0x05
-#define GR06	0x06
-#define GR07	0x07
-#define GR08	0x08
-#define GR0F	0x0F
-#define GR20	0x20
-#define GR23	0x23
-#define GR2F	0x2F
-#define GR30	0x30
-#define GR31	0x31
-#define GR33	0x33
-#define GR52	0x52
-#define GR53	0x53
-#define GR5D	0x5d
-
-
-//
-// Graphics Engine
-//
-#define GEBase	0x2100		// could be mapped elsewhere if we like it
-#define GE00	(GEBase+0x00)	// source 1, p 111
-#define GE04	(GEBase+0x04)	// source 2, p 111
-#define GE08	(GEBase+0x08)	// destination 1, p 111
-#define GE0C	(GEBase+0x0C)	// destination 2, p 112
-#define GE10	(GEBase+0x10)	// right view base & enable, p 112
-#define GE13	(GEBase+0x13)	// left view base & enable, p 112
-#define GE18	(GEBase+0x18)	// block write start address, p 112
-#define GE1C	(GEBase+0x1C)	// block write end address, p 112
-#define GE20	(GEBase+0x20)	// engine status, p 113
-#define GE24	(GEBase+0x24)	// reset all GE pointers
-#define GE44	(GEBase+0x44)	// command register, p 126
-#define GE48	(GEBase+0x48)	// raster operation, p 127
-#define GE60	(GEBase+0x60)	// foreground color, p 128
-#define GE64	(GEBase+0x64)	// background color, p 128
-#define GE6C	(GEBase+0x6C)	// Pattern and Style, p 129, ok
-#define GE9C	(GEBase+0x9C)	// pixel engine data port, p 125
-#define GEB8	(GEBase+0xB8)	// Destination Stride / Buffer Base 0, p 133
-#define GEBC	(GEBase+0xBC)	// Destination Stride / Buffer Base 1, p 133
-#define GEC0	(GEBase+0xC0)	// Destination Stride / Buffer Base 2, p 133
-#define GEC4	(GEBase+0xC4)	// Destination Stride / Buffer Base 3, p 133
-#define GEC8	(GEBase+0xC8)	// Source Stride / Buffer Base 0, p 133
-#define GECC	(GEBase+0xCC)	// Source Stride / Buffer Base 1, p 133
-#define GED0	(GEBase+0xD0)	// Source Stride / Buffer Base 2, p 133
-#define GED4	(GEBase+0xD4)	// Source Stride / Buffer Base 3, p 133
-- 
GitLab


From 267b01fe8345098b9459f5bac3d97cbba3264ec4 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Mon, 13 Apr 2009 14:40:00 -0700
Subject: [PATCH 0128/1421] sysrq: remove duplicated #include

Remove duplicated #include in drivers/char/sysrq.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/sysrq.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 6de020d078e..b0a6a3e5192 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -35,7 +35,6 @@
 #include <linux/vt_kern.h>
 #include <linux/workqueue.h>
 #include <linux/kexec.h>
-#include <linux/interrupt.h>
 #include <linux/hrtimer.h>
 #include <linux/oom.h>
 
-- 
GitLab


From 5a52edded382c2f436721d5a044ed16c290c5750 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 13 Apr 2009 14:40:01 -0700
Subject: [PATCH 0129/1421] mm: point the UNEVICTABLE_LRU config option at the
 documentation

Point the UNEVICTABLE_LRU config option at the documentation describing
the option.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/mm/Kconfig b/mm/Kconfig
index b53427ad30a..57971d2ab84 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -213,6 +213,8 @@ config UNEVICTABLE_LRU
 	  will use one page flag and increase the code size a little,
 	  say Y unless you know what you are doing.
 
+	  See Documentation/vm/unevictable-lru.txt for more information.
+
 config HAVE_MLOCK
 	bool
 	default y if MMU=y
-- 
GitLab


From c24b720188e9a1f83caa5b6d49b4cb5b843256f1 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 13 Apr 2009 14:40:01 -0700
Subject: [PATCH 0130/1421] mm: reformat the Unevictable-LRU documentation

Do a bit of reformatting on the Unevictable-LRU documentation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/vm/unevictable-lru.txt | 1041 ++++++++++++++------------
 1 file changed, 572 insertions(+), 469 deletions(-)

diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 0706a7282a8..2d70d0d9510 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -1,588 +1,691 @@
-
-This document describes the Linux memory management "Unevictable LRU"
-infrastructure and the use of this infrastructure to manage several types
-of "unevictable" pages.  The document attempts to provide the overall
-rationale behind this mechanism and the rationale for some of the design
-decisions that drove the implementation.  The latter design rationale is
-discussed in the context of an implementation description.  Admittedly, one
-can obtain the implementation details--the "what does it do?"--by reading the
-code.  One hopes that the descriptions below add value by provide the answer
-to "why does it do that?".
-
-Unevictable LRU Infrastructure:
-
-The Unevictable LRU adds an additional LRU list to track unevictable pages
-and to hide these pages from vmscan.  This mechanism is based on a patch by
-Larry Woodman of Red Hat to address several scalability problems with page
+			==============================
+			UNEVICTABLE LRU INFRASTRUCTURE
+			==============================
+
+========
+CONTENTS
+========
+
+ (*) The Unevictable LRU
+
+     - The unevictable page list.
+     - Memory control group interaction.
+     - Marking address spaces unevictable.
+     - Detecting Unevictable Pages.
+     - vmscan's handling of unevictable pages.
+
+ (*) mlock()'d pages.
+
+     - History.
+     - Basic management.
+     - mlock()/mlockall() system call handling.
+     - Filtering special vmas.
+     - munlock()/munlockall() system call handling.
+     - Migrating mlocked pages.
+     - mmap(MAP_LOCKED) system call handling.
+     - munmap()/exit()/exec() system call handling.
+     - try_to_unmap().
+     - try_to_munlock() reverse map scan.
+     - Page reclaim in shrink_*_list().
+
+
+============
+INTRODUCTION
+============
+
+This document describes the Linux memory manager's "Unevictable LRU"
+infrastructure and the use of this to manage several types of "unevictable"
+pages.
+
+The document attempts to provide the overall rationale behind this mechanism
+and the rationale for some of the design decisions that drove the
+implementation.  The latter design rationale is discussed in the context of an
+implementation description.  Admittedly, one can obtain the implementation
+details - the "what does it do?" - by reading the code.  One hopes that the
+descriptions below add value by provide the answer to "why does it do that?".
+
+
+===================
+THE UNEVICTABLE LRU
+===================
+
+The Unevictable LRU facility adds an additional LRU list to track unevictable
+pages and to hide these pages from vmscan.  This mechanism is based on a patch
+by Larry Woodman of Red Hat to address several scalability problems with page
 reclaim in Linux.  The problems have been observed at customer sites on large
-memory x86_64 systems.  For example, a non-numal x86_64 platform with 128GB
-of main memory will have over 32 million 4k pages in a single zone.  When a
-large fraction of these pages are not evictable for any reason [see below],
-vmscan will spend a lot of time scanning the LRU lists looking for the small
-fraction of pages that are evictable.  This can result in a situation where
-all cpus are spending 100% of their time in vmscan for hours or days on end,
-with the system completely unresponsive.
-
-The Unevictable LRU infrastructure addresses the following classes of
-unevictable pages:
-
-+ page owned by ramfs
-+ page mapped into SHM_LOCKed shared memory regions
-+ page mapped into VM_LOCKED [mlock()ed] vmas
-
-The infrastructure might be able to handle other conditions that make pages
+memory x86_64 systems.
+
+To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
+main memory will have over 32 million 4k pages in a single zone.  When a large
+fraction of these pages are not evictable for any reason [see below], vmscan
+will spend a lot of time scanning the LRU lists looking for the small fraction
+of pages that are evictable.  This can result in a situation where all CPUs are
+spending 100% of their time in vmscan for hours or days on end, with the system
+completely unresponsive.
+
+The unevictable list addresses the following classes of unevictable pages:
+
+ (*) Those owned by ramfs.
+
+ (*) Those mapped into SHM_LOCK'd shared memory regions.
+
+ (*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
+
+The infrastructure may also be able to handle other conditions that make pages
 unevictable, either by definition or by circumstance, in the future.
 
 
-The Unevictable LRU List
+THE UNEVICTABLE PAGE LIST
+-------------------------
 
 The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
 called the "unevictable" list and an associated page flag, PG_unevictable, to
-indicate that the page is being managed on the unevictable list.  The
-PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active
-flag in that it indicates on which LRU list a page resides when PG_lru is set.
-The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU
-Kconfig option.
+indicate that the page is being managed on the unevictable list.
+
+The PG_unevictable flag is analogous to, and mutually exclusive with, the
+PG_active flag in that it indicates on which LRU list a page resides when
+PG_lru is set.  The unevictable list is compile-time configurable based on the
+UNEVICTABLE_LRU Kconfig option.
 
 The Unevictable LRU infrastructure maintains unevictable pages on an additional
 LRU list for a few reasons:
 
-1) We get to "treat unevictable pages just like we treat other pages in the
-   system, which means we get to use the same code to manipulate them, the
-   same code to isolate them (for migrate, etc.), the same code to keep track
-   of the statistics, etc..." [Rik van Riel]
+ (1) We get to "treat unevictable pages just like we treat other pages in the
+     system - which means we get to use the same code to manipulate them, the
+     same code to isolate them (for migrate, etc.), the same code to keep track
+     of the statistics, etc..." [Rik van Riel]
+
+ (2) We want to be able to migrate unevictable pages between nodes for memory
+     defragmentation, workload management and memory hotplug.  The linux kernel
+     can only migrate pages that it can successfully isolate from the LRU
+     lists.  If we were to maintain pages elsewhere than on an LRU-like list,
+     where they can be found by isolate_lru_page(), we would prevent their
+     migration, unless we reworked migration code to find the unevictable pages
+     itself.
 
-2) We want to be able to migrate unevictable pages between nodes--for memory
-   defragmentation, workload management and memory hotplug.  The linux kernel
-   can only migrate pages that it can successfully isolate from the lru lists.
-   If we were to maintain pages elsewise than on an lru-like list, where they
-   can be found by isolate_lru_page(), we would prevent their migration, unless
-   we reworked migration code to find the unevictable pages.
 
+The unevictable list does not differentiate between file-backed and anonymous,
+swap-backed pages.  This differentiation is only important while the pages are,
+in fact, evictable.
 
-The unevictable LRU list does not differentiate between file backed and swap
-backed [anon] pages.  This differentiation is only important while the pages
-are, in fact, evictable.
+The unevictable list benefits from the "arrayification" of the per-zone LRU
+lists and statistics originally proposed and posted by Christoph Lameter.
 
-The unevictable LRU list benefits from the "arrayification" of the per-zone
-LRU lists and statistics originally proposed and posted by Christoph Lameter.
+The unevictable list does not use the LRU pagevec mechanism. Rather,
+unevictable pages are placed directly on the page's zone's unevictable list
+under the zone lru_lock.  This allows us to prevent the stranding of pages on
+the unevictable list when one task has the page isolated from the LRU and other
+tasks are changing the "evictability" state of the page.
 
-The unevictable list does not use the lru pagevec mechanism. Rather,
-unevictable pages are placed directly on the page's zone's unevictable
-list under the zone lru_lock.  The reason for this is to prevent stranding
-of pages on the unevictable list when one task has the page isolated from the
-lru and other tasks are changing the "evictability" state of the page.
 
+MEMORY CONTROL GROUP INTERACTION
+--------------------------------
 
-Unevictable LRU and Memory Controller Interaction
+The unevictable LRU facility interacts with the memory control group [aka
+memory controller; see Documentation/cgroups/memory.txt] by extending the
+lru_list enum.
+
+The memory controller data structure automatically gets a per-zone unevictable
+list as a result of the "arrayification" of the per-zone LRU lists (one per
+lru_list enum element).  The memory controller tracks the movement of pages to
+and from the unevictable list.
 
-The memory controller data structure automatically gets a per zone unevictable
-lru list as a result of the "arrayification" of the per-zone LRU lists.  The
-memory controller tracks the movement of pages to and from the unevictable list.
 When a memory control group comes under memory pressure, the controller will
 not attempt to reclaim pages on the unevictable list.  This has a couple of
-effects.  Because the pages are "hidden" from reclaim on the unevictable list,
-the reclaim process can be more efficient, dealing only with pages that have
-a chance of being reclaimed.  On the other hand, if too many of the pages
-charged to the control group are unevictable, the evictable portion of the
-working set of the tasks in the control group may not fit into the available
-memory.  This can cause the control group to thrash or to oom-kill tasks.
-
-
-Unevictable LRU:  Detecting Unevictable Pages
-
-The function page_evictable(page, vma) in vmscan.c determines whether a
-page is evictable or not.  For ramfs pages and pages in SHM_LOCKed regions,
-page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's
-address space using a wrapper function.  Wrapper functions are used to set,
-clear and test the flag to reduce the requirement for #ifdef's throughout the
-source code.  AS_UNEVICTABLE is set on ramfs inode/mapping when it is created.
-This flag remains for the life of the inode.
-
-For shared memory regions, AS_UNEVICTABLE is set when an application
-successfully SHM_LOCKs the region and is removed when the region is
-SHM_UNLOCKed.  Note that shmctl(SHM_LOCK, ...) does not populate the page
-tables for the region as does, for example, mlock().   So, we make no special
-effort to push any pages in the SHM_LOCKed region to the unevictable list.
-Vmscan will do this when/if it encounters the pages during reclaim.  On
-SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the
-unevictable list if no other condition keeps them unevictable.  If a SHM_LOCKed
-region is destroyed, the pages are also "rescued" from the unevictable list in
-the process of freeing them.
-
-page_evictable() detects mlock()ed pages by testing an additional page flag,
-PG_mlocked via the PageMlocked() wrapper.  If the page is NOT mlocked, and a
-non-NULL vma is supplied, page_evictable() will check whether the vma is
+effects:
+
+ (1) Because the pages are "hidden" from reclaim on the unevictable list, the
+     reclaim process can be more efficient, dealing only with pages that have a
+     chance of being reclaimed.
+
+ (2) On the other hand, if too many of the pages charged to the control group
+     are unevictable, the evictable portion of the working set of the tasks in
+     the control group may not fit into the available memory.  This can cause
+     the control group to thrash or to OOM-kill tasks.
+
+
+MARKING ADDRESS SPACES UNEVICTABLE
+----------------------------------
+
+For facilities such as ramfs none of the pages attached to the address space
+may be evicted.  To prevent eviction of any such pages, the AS_UNEVICTABLE
+address space flag is provided, and this can be manipulated by a filesystem
+using a number of wrapper functions:
+
+ (*) void mapping_set_unevictable(struct address_space *mapping);
+
+	Mark the address space as being completely unevictable.
+
+ (*) void mapping_clear_unevictable(struct address_space *mapping);
+
+	Mark the address space as being evictable.
+
+ (*) int mapping_unevictable(struct address_space *mapping);
+
+	Query the address space, and return true if it is completely
+	unevictable.
+
+These are currently used in two places in the kernel:
+
+ (1) By ramfs to mark the address spaces of its inodes when they are created,
+     and this mark remains for the life of the inode.
+
+ (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
+
+     Note that SHM_LOCK is not required to page in the locked pages if they're
+     swapped out; the application must touch the pages manually if it wants to
+     ensure they're in memory.
+
+
+DETECTING UNEVICTABLE PAGES
+---------------------------
+
+The function page_evictable() in vmscan.c determines whether a page is
+evictable or not using the query function outlined above [see section "Marking
+address spaces unevictable"] to check the AS_UNEVICTABLE flag.
+
+For address spaces that are so marked after being populated (as SHM regions
+might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
+the page tables for the region as does, for example, mlock(), nor need it make
+any special effort to push any pages in the SHM_LOCK'd area to the unevictable
+list.  Instead, vmscan will do this if and when it encounters the pages during
+a reclamation scan.
+
+On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
+the pages in the region and "rescue" them from the unevictable list if no other
+condition is keeping them unevictable.  If an unevictable region is destroyed,
+the pages are also "rescued" from the unevictable list in the process of
+freeing them.
+
+page_evictable() also checks for mlocked pages by testing an additional page
+flag, PG_mlocked (as wrapped by PageMlocked()).  If the page is NOT mlocked,
+and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is
 VM_LOCKED via is_mlocked_vma().  is_mlocked_vma() will SetPageMlocked() and
 update the appropriate statistics if the vma is VM_LOCKED.  This method allows
 efficient "culling" of pages in the fault path that are being faulted in to
-VM_LOCKED vmas.
+VM_LOCKED VMAs.
 
 
-Unevictable Pages and Vmscan [shrink_*_list()]
+VMSCAN'S HANDLING OF UNEVICTABLE PAGES
+--------------------------------------
 
 If unevictable pages are culled in the fault path, or moved to the unevictable
-list at mlock() or mmap() time, vmscan will never encounter the pages until
-they have become evictable again, for example, via munlock() and have been
-"rescued" from the unevictable list.  However, there may be situations where we
-decide, for the sake of expediency, to leave a unevictable page on one of the
-regular active/inactive LRU lists for vmscan to deal with.  Vmscan checks for
-such pages in all of the shrink_{active|inactive|page}_list() functions and
-will "cull" such pages that it encounters--that is, it diverts those pages to
-the unevictable list for the zone being scanned.
-
-There may be situations where a page is mapped into a VM_LOCKED vma, but the
-page is not marked as PageMlocked.  Such pages will make it all the way to
+list at mlock() or mmap() time, vmscan will not encounter the pages until they
+have become evictable again (via munlock() for example) and have been "rescued"
+from the unevictable list.  However, there may be situations where we decide,
+for the sake of expediency, to leave a unevictable page on one of the regular
+active/inactive LRU lists for vmscan to deal with.  vmscan checks for such
+pages in all of the shrink_{active|inactive|page}_list() functions and will
+"cull" such pages that it encounters: that is, it diverts those pages to the
+unevictable list for the zone being scanned.
+
+There may be situations where a page is mapped into a VM_LOCKED VMA, but the
+page is not marked as PG_mlocked.  Such pages will make it all the way to
 shrink_page_list() where they will be detected when vmscan walks the reverse
-map in try_to_unmap().  If try_to_unmap() returns SWAP_MLOCK, shrink_page_list()
-will cull the page at that point.
+map in try_to_unmap().  If try_to_unmap() returns SWAP_MLOCK,
+shrink_page_list() will cull the page at that point.
 
-To "cull" an unevictable page, vmscan simply puts the page back on the lru
-list using putback_lru_page()--the inverse operation to isolate_lru_page()--
-after dropping the page lock.  Because the condition which makes the page
-unevictable may change once the page is unlocked, putback_lru_page() will
-recheck the unevictable state of a page that it places on the unevictable lru
-list.  If the page has become unevictable, putback_lru_page() removes it from
-the list and retries, including the page_unevictable() test.  Because such a
-race is a rare event and movement of pages onto the unevictable list should be
-rare, these extra evictabilty checks should not occur in the majority of calls
-to putback_lru_page().
+To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
+using putback_lru_page() - the inverse operation to isolate_lru_page() - after
+dropping the page lock.  Because the condition which makes the page unevictable
+may change once the page is unlocked, putback_lru_page() will recheck the
+unevictable state of a page that it places on the unevictable list.  If the
+page has become unevictable, putback_lru_page() removes it from the list and
+retries, including the page_unevictable() test.  Because such a race is a rare
+event and movement of pages onto the unevictable list should be rare, these
+extra evictabilty checks should not occur in the majority of calls to
+putback_lru_page().
 
 
-Mlocked Page:  Prior Work
+=============
+MLOCKED PAGES
+=============
 
-The "Unevictable Mlocked Pages" infrastructure is based on work originally
+The unevictable page list is also useful for mlock(), in addition to ramfs and
+SYSV SHM.  Note that mlock() is only available in CONFIG_MMU=y situations; in
+NOMMU situations, all mappings are effectively mlocked.
+
+
+HISTORY
+-------
+
+The "Unevictable mlocked Pages" infrastructure is based on work originally
 posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
-Nick posted his patch as an alternative to a patch posted by Christoph
-Lameter to achieve the same objective--hiding mlocked pages from vmscan.
-In Nick's patch, he used one of the struct page lru list link fields as a count
-of VM_LOCKED vmas that map the page.  This use of the link field for a count
-prevented the management of the pages on an LRU list.  Thus, mlocked pages were
-not migratable as isolate_lru_page() could not find them and the lru list link
-field was not available to the migration subsystem.  Nick resolved this by
-putting mlocked pages back on the lru list before attempting to isolate them,
-thus abandoning the count of VM_LOCKED vmas.  When Nick's patch was integrated
-with the Unevictable LRU work, the count was replaced by walking the reverse
-map to determine whether any VM_LOCKED vmas mapped the page.  More on this
-below.
-
-
-Mlocked Pages:  Basic Management
-
-Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of
-unevictable pages.  When such a page has been "noticed" by the memory
-management subsystem, the page is marked with the PG_mlocked [PageMlocked()]
-flag.  A PageMlocked() page will be placed on the unevictable LRU list when
-it is added to the LRU.   Pages can be "noticed" by memory management in
-several places:
-
-1) in the mlock()/mlockall() system call handlers.
-2) in the mmap() system call handler when mmap()ing a region with the
-   MAP_LOCKED flag, or mmap()ing a region in a task that has called
-   mlockall() with the MCL_FUTURE flag.  Both of these conditions result
-   in the VM_LOCKED flag being set for the vma.
-3) in the fault path, if mlocked pages are "culled" in the fault path,
-   and when a VM_LOCKED stack segment is expanded.
-4) as mentioned above, in vmscan:shrink_page_list() when attempting to
-   reclaim a page in a VM_LOCKED vma via try_to_unmap().
-
-Mlocked pages become unlocked and rescued from the unevictable list when:
-
-1) mapped in a range unlocked via the munlock()/munlockall() system calls.
-2) munmapped() out of the last VM_LOCKED vma that maps the page, including
-   unmapping at task exit.
-3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file.
-4) before a page is COWed in a VM_LOCKED vma.
-
-
-Mlocked Pages:  mlock()/mlockall() System Call Handling
+Nick posted his patch as an alternative to a patch posted by Christoph Lameter
+to achieve the same objective: hiding mlocked pages from vmscan.
+
+In Nick's patch, he used one of the struct page LRU list link fields as a count
+of VM_LOCKED VMAs that map the page.  This use of the link field for a count
+prevented the management of the pages on an LRU list, and thus mlocked pages
+were not migratable as isolate_lru_page() could not find them, and the LRU list
+link field was not available to the migration subsystem.
+
+Nick resolved this by putting mlocked pages back on the lru list before
+attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs.  When
+Nick's patch was integrated with the Unevictable LRU work, the count was
+replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
+mapped the page.  More on this below.
+
+
+BASIC MANAGEMENT
+----------------
+
+mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
+pages.  When such a page has been "noticed" by the memory management subsystem,
+the page is marked with the PG_mlocked flag.  This can be manipulated using the
+PageMlocked() functions.
+
+A PG_mlocked page will be placed on the unevictable list when it is added to
+the LRU.  Such pages can be "noticed" by memory management in several places:
+
+ (1) in the mlock()/mlockall() system call handlers;
+
+ (2) in the mmap() system call handler when mmapping a region with the
+     MAP_LOCKED flag;
+
+ (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
+     flag
+
+ (4) in the fault path, if mlocked pages are "culled" in the fault path,
+     and when a VM_LOCKED stack segment is expanded; or
+
+ (5) as mentioned above, in vmscan:shrink_page_list() when attempting to
+     reclaim a page in a VM_LOCKED VMA via try_to_unmap()
+
+all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
+already have it set.
+
+mlocked pages become unlocked and rescued from the unevictable list when:
+
+ (1) mapped in a range unlocked via the munlock()/munlockall() system calls;
+
+ (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
+     unmapping at task exit;
+
+ (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
+     or
+
+ (4) before a page is COW'd in a VM_LOCKED VMA.
+
+
+mlock()/mlockall() SYSTEM CALL HANDLING
+---------------------------------------
 
 Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
-for each vma in the range specified by the call.  In the case of mlockall(),
+for each VMA in the range specified by the call.  In the case of mlockall(),
 this is the entire active address space of the task.  Note that mlock_fixup()
-is used for both mlock()ing and munlock()ing a range of memory.  A call to
-mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED
-is treated as a no-op--mlock_fixup() simply returns.
-
-If the vma passes some filtering described in "Mlocked Pages:  Filtering Vmas"
-below, mlock_fixup() will attempt to merge the vma with its neighbors or split
-off a subset of the vma if the range does not cover the entire vma.  Once the
-vma has been merged or split or neither, mlock_fixup() will call
-__mlock_vma_pages_range() to fault in the pages via get_user_pages() and
-to mark the pages as mlocked via mlock_vma_page().
-
-Note that the vma being mlocked might be mapped with PROT_NONE.  In this case,
-get_user_pages() will be unable to fault in the pages.  That's OK.  If pages
-do end up getting faulted into this VM_LOCKED vma, we'll handle them in the
+is used for both mlocking and munlocking a range of memory.  A call to mlock()
+an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
+treated as a no-op, and mlock_fixup() simply returns.
+
+If the VMA passes some filtering as described in "Filtering Special Vmas"
+below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
+off a subset of the VMA if the range does not cover the entire VMA.  Once the
+VMA has been merged or split or neither, mlock_fixup() will call
+__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to
+mark the pages as mlocked via mlock_vma_page().
+
+Note that the VMA being mlocked might be mapped with PROT_NONE.  In this case,
+get_user_pages() will be unable to fault in the pages.  That's okay.  If pages
+do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
 fault path or in vmscan.
 
 Also note that a page returned by get_user_pages() could be truncated or
-migrated out from under us, while we're trying to mlock it.  To detect
-this, __mlock_vma_pages_range() tests the page_mapping after acquiring
-the page lock.  If the page is still associated with its mapping, we'll
-go ahead and call mlock_vma_page().  If the mapping is gone, we just
-unlock the page and move on.  Worse case, this results in page mapped
-in a VM_LOCKED vma remaining on a normal LRU list without being
-PageMlocked().  Again, vmscan will detect and cull such pages.
-
-mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will
-TestSetPageMlocked() for each page returned by get_user_pages().  We use
-TestSetPageMlocked() because the page might already be mlocked by another
-task/vma and we don't want to do extra work.  We especially do not want to
-count an mlocked page more than once in the statistics.  If the page was
-already mlocked, mlock_vma_page() is done.
+migrated out from under us, while we're trying to mlock it.  To detect this,
+__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock.
+If the page is still associated with its mapping, we'll go ahead and call
+mlock_vma_page().  If the mapping is gone, we just unlock the page and move on.
+In the worst case, this will result in a page mapped in a VM_LOCKED VMA
+remaining on a normal LRU list without being PageMlocked().  Again, vmscan will
+detect and cull such pages.
+
+mlock_vma_page() will call TestSetPageMlocked() for each page returned by
+get_user_pages().  We use TestSetPageMlocked() because the page might already
+be mlocked by another task/VMA and we don't want to do extra work.  We
+especially do not want to count an mlocked page more than once in the
+statistics.  If the page was already mlocked, mlock_vma_page() need do nothing
+more.
 
 If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
 page from the LRU, as it is likely on the appropriate active or inactive list
-at that time.  If the isolate_lru_page() succeeds, mlock_vma_page() will
-putback the page--putback_lru_page()--which will notice that the page is now
-mlocked and divert the page to the zone's unevictable LRU list.  If
+at that time.  If the isolate_lru_page() succeeds, mlock_vma_page() will put
+back the page - by calling putback_lru_page() - which will notice that the page
+is now mlocked and divert the page to the zone's unevictable list.  If
 mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
-it later if/when it attempts to reclaim the page.
+it later if and when it attempts to reclaim the page.
 
 
-Mlocked Pages:  Filtering Special Vmas
+FILTERING SPECIAL VMAS
+----------------------
 
-mlock_fixup() filters several classes of "special" vmas:
+mlock_fixup() filters several classes of "special" VMAs:
 
-1) vmas with VM_IO|VM_PFNMAP set are skipped entirely.  The pages behind
+1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely.  The pages behind
    these mappings are inherently pinned, so we don't need to mark them as
-   mlocked.  In any case, most of the pages have no struct page in which to
-   so mark the page.  Because of this, get_user_pages() will fail for these
-   vmas, so there is no sense in attempting to visit them.
-
-2) vmas mapping hugetlbfs page are already effectively pinned into memory.
-   We don't need nor want to mlock() these pages.  However, to preserve the
-   prior behavior of mlock()--before the unevictable/mlock changes--
-   mlock_fixup() will call make_pages_present() in the hugetlbfs vma range
-   to allocate the huge pages and populate the ptes.
-
-3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of
-   kernel pages, such as the vdso page, relay channel pages, etc.  These pages
+   mlocked.  In any case, most of the pages have no struct page in which to so
+   mark the page.  Because of this, get_user_pages() will fail for these VMAs,
+   so there is no sense in attempting to visit them.
+
+2) VMAs mapping hugetlbfs page are already effectively pinned into memory.  We
+   neither need nor want to mlock() these pages.  However, to preserve the
+   prior behavior of mlock() - before the unevictable/mlock changes -
+   mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
+   allocate the huge pages and populate the ptes.
+
+3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of
+   kernel pages, such as the VDSO page, relay channel pages, etc.  These pages
    are inherently unevictable and are not managed on the LRU lists.
-   mlock_fixup() treats these vmas the same as hugetlbfs vmas.  It calls
+   mlock_fixup() treats these VMAs the same as hugetlbfs VMAs.  It calls
    make_pages_present() to populate the ptes.
 
-Note that for all of these special vmas, mlock_fixup() does not set the
+Note that for all of these special VMAs, mlock_fixup() does not set the
 VM_LOCKED flag.  Therefore, we won't have to deal with them later during
-munlock() or munmap()--for example, at task exit.  Neither does mlock_fixup()
-account these vmas against the task's "locked_vm".
-
-Mlocked Pages:  Downgrading the Mmap Semaphore.
-
-mlock_fixup() must be called with the mmap semaphore held for write, because
-it may have to merge or split vmas.  However, mlocking a large region of
-memory can take a long time--especially if vmscan must reclaim pages to
-satisfy the regions requirements.  Faulting in a large region with the mmap
-semaphore held for write can hold off other faults on the address space, in
-the case of a multi-threaded task.  It can also hold off scans of the task's
-address space via /proc.  While testing under heavy load, it was observed that
-the ps(1) command could be held off for many minutes while a large segment was
-mlock()ed down.
-
-To address this issue, and to make the system more responsive during mlock()ing
-of large segments, mlock_fixup() downgrades the mmap semaphore to read mode
-during the call to __mlock_vma_pages_range().  This works fine.  However, the
-callers of mlock_fixup() expect the semaphore to be returned in write mode.
-So, mlock_fixup() "upgrades" the semphore to write mode.  Linux does not
-support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore
-and reacquire it in write mode.  In a multi-threaded task, it is possible for
-the task memory map to change while the semaphore is dropped.  Therefore,
-mlock_fixup() looks up the vma at the range start address after reacquiring
-the semaphore in write mode and verifies that it still covers the original
-range.  If not, mlock_fixup() returns an error [-EAGAIN].  All callers of
-mlock_fixup() have been changed to deal with this new error condition.
-
-Note:  when munlocking a region, all of the pages should already be resident--
-unless we have racing threads mlocking() and munlocking() regions.  So,
-unlocking should not have to wait for page allocations nor faults  of any kind.
-Therefore mlock_fixup() does not downgrade the semaphore for munlock().
-
-
-Mlocked Pages:  munlock()/munlockall() System Call Handling
-
-The munlock() and munlockall() system calls are handled by the same functions--
-do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock
-vs lock operation indicated by an argument.  So, these system calls are also
-handled by mlock_fixup().  Again, if called for an already munlock()ed vma,
-mlock_fixup() simply returns.  Because of the vma filtering discussed above,
-VM_LOCKED will not be set in any "special" vmas.  So, these vmas will be
+munlock(), munmap() or task exit.  Neither does mlock_fixup() account these
+VMAs against the task's "locked_vm".
+
+
+munlock()/munlockall() SYSTEM CALL HANDLING
+-------------------------------------------
+
+The munlock() and munlockall() system calls are handled by the same functions -
+do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
+lock operation indicated by an argument.  So, these system calls are also
+handled by mlock_fixup().  Again, if called for an already munlocked VMA,
+mlock_fixup() simply returns.  Because of the VMA filtering discussed above,
+VM_LOCKED will not be set in any "special" VMAs.  So, these VMAs will be
 ignored for munlock.
 
-If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off
-the specified range.  The range is then munlocked via the function
-__mlock_vma_pages_range()--the same function used to mlock a vma range--
+If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
+specified range.  The range is then munlocked via the function
+__mlock_vma_pages_range() - the same function used to mlock a VMA range -
 passing a flag to indicate that munlock() is being performed.
 
-Because the vma access protections could have been changed to PROT_NONE after
+Because the VMA access protections could have been changed to PROT_NONE after
 faulting in and mlocking pages, get_user_pages() was unreliable for visiting
-these pages for munlocking.  Because we don't want to leave pages mlocked(),
+these pages for munlocking.  Because we don't want to leave pages mlocked,
 get_user_pages() was enhanced to accept a flag to ignore the permissions when
-fetching the pages--all of which should be resident as a result of previous
-mlock()ing.
+fetching the pages - all of which should be resident as a result of previous
+mlocking.
 
 For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling
 munlock_vma_page().  munlock_vma_page() unconditionally clears the PG_mlocked
-flag using TestClearPageMlocked().  As with mlock_vma_page(), munlock_vma_page()
-use the Test*PageMlocked() function to handle the case where the page might
-have already been unlocked by another task.  If the page was mlocked,
-munlock_vma_page() updates that zone statistics for the number of mlocked
-pages.  Note, however, that at this point we haven't checked whether the page
-is mapped by other VM_LOCKED vmas.
-
-We can't call try_to_munlock(), the function that walks the reverse map to check
-for other VM_LOCKED vmas, without first isolating the page from the LRU.
+flag using TestClearPageMlocked().  As with mlock_vma_page(),
+munlock_vma_page() use the Test*PageMlocked() function to handle the case where
+the page might have already been unlocked by another task.  If the page was
+mlocked, munlock_vma_page() updates that zone statistics for the number of
+mlocked pages.  Note, however, that at this point we haven't checked whether
+the page is mapped by other VM_LOCKED VMAs.
+
+We can't call try_to_munlock(), the function that walks the reverse map to
+check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
 try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
-not be on an lru list.  [More on these below.]  However, the call to
-isolate_lru_page() could fail, in which case we couldn't try_to_munlock().
-So, we go ahead and clear PG_mlocked up front, as this might be the only chance
-we have.  If we can successfully isolate the page, we go ahead and
+not be on an LRU list [more on these below].  However, the call to
+isolate_lru_page() could fail, in which case we couldn't try_to_munlock().  So,
+we go ahead and clear PG_mlocked up front, as this might be the only chance we
+have.  If we can successfully isolate the page, we go ahead and
 try_to_munlock(), which will restore the PG_mlocked flag and update the zone
-page statistics if it finds another vma holding the page mlocked.  If we fail
+page statistics if it finds another VMA holding the page mlocked.  If we fail
 to isolate the page, we'll have left a potentially mlocked page on the LRU.
-This is fine, because we'll catch it later when/if vmscan tries to reclaim the
-page.  This should be relatively rare.
-
-Mlocked Pages:  Migrating Them...
-
-A page that is being migrated has been isolated from the lru lists and is
-held locked across unmapping of the page, updating the page's mapping
-[address_space] entry and copying the contents and state, until the
-page table entry has been replaced with an entry that refers to the new
-page.  Linux supports migration of mlocked pages and other unevictable
-pages.  This involves simply moving the PageMlocked and PageUnevictable states
-from the old page to the new page.
-
-Note that page migration can race with mlocking or munlocking of the same
-page.  This has been discussed from the mlock/munlock perspective in the
-respective sections above.  Both processes [migration, m[un]locking], hold
-the page locked.  This provides the first level of synchronization.  Page
-migration zeros out the page_mapping of the old page before unlocking it,
-so m[un]lock can skip these pages by testing the page mapping under page
-lock.
-
-When completing page migration, we place the new and old pages back onto the
-lru after dropping the page lock.  The "unneeded" page--old page on success,
-new page on failure--will be freed when the reference count held by the
-migration process is released.  To ensure that we don't strand pages on the
-unevictable list because of a race between munlock and migration, page
-migration uses the putback_lru_page() function to add migrated pages back to
-the lru.
-
-
-Mlocked Pages:  mmap(MAP_LOCKED) System Call Handling
+This is fine, because we'll catch it later if and if vmscan tries to reclaim
+the page.  This should be relatively rare.
+
+
+MIGRATING MLOCKED PAGES
+-----------------------
+
+A page that is being migrated has been isolated from the LRU lists and is held
+locked across unmapping of the page, updating the page's address space entry
+and copying the contents and state, until the page table entry has been
+replaced with an entry that refers to the new page.  Linux supports migration
+of mlocked pages and other unevictable pages.  This involves simply moving the
+PG_mlocked and PG_unevictable states from the old page to the new page.
+
+Note that page migration can race with mlocking or munlocking of the same page.
+This has been discussed from the mlock/munlock perspective in the respective
+sections above.  Both processes (migration and m[un]locking) hold the page
+locked.  This provides the first level of synchronization.  Page migration
+zeros out the page_mapping of the old page before unlocking it, so m[un]lock
+can skip these pages by testing the page mapping under page lock.
+
+To complete page migration, we place the new and old pages back onto the LRU
+after dropping the page lock.  The "unneeded" page - old page on success, new
+page on failure - will be freed when the reference count held by the migration
+process is released.  To ensure that we don't strand pages on the unevictable
+list because of a race between munlock and migration, page migration uses the
+putback_lru_page() function to add migrated pages back to the LRU.
+
+
+mmap(MAP_LOCKED) SYSTEM CALL HANDLING
+-------------------------------------
 
 In addition the the mlock()/mlockall() system calls, an application can request
-that a region of memory be mlocked using the MAP_LOCKED flag with the mmap()
+that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
 call.  Furthermore, any mmap() call or brk() call that expands the heap by a
 task that has previously called mlockall() with the MCL_FUTURE flag will result
-in the newly mapped memory being mlocked.  Before the unevictable/mlock changes,
-the kernel simply called make_pages_present() to allocate pages and populate
-the page table.
+in the newly mapped memory being mlocked.  Before the unevictable/mlock
+changes, the kernel simply called make_pages_present() to allocate pages and
+populate the page table.
 
 To mlock a range of memory under the unevictable/mlock infrastructure, the
 mmap() handler and task address space expansion functions call
 mlock_vma_pages_range() specifying the vma and the address range to mlock.
-mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in
-"Mlocked Pages:  Filtering Vmas".  It will clear the VM_LOCKED flag, which will
-have already been set by the caller, in filtered vmas.  Thus these vma's need
-not be visited for munlock when the region is unmapped.
+mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in
+"Filtering Special VMAs".  It will clear the VM_LOCKED flag, which will have
+already been set by the caller, in filtered VMAs.  Thus these VMA's need not be
+visited for munlock when the region is unmapped.
 
-For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
+For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
 fault/allocate the pages and mlock them.  Again, like mlock_fixup(),
 mlock_vma_pages_range() downgrades the mmap semaphore to read mode before
-attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore
+attempting to fault/allocate and mlock the pages and "upgrades" the semaphore
 back to write mode before returning.
 
-The callers of mlock_vma_pages_range() will have already added the memory
-range to be mlocked to the task's "locked_vm".  To account for filtered vmas,
+The callers of mlock_vma_pages_range() will have already added the memory range
+to be mlocked to the task's "locked_vm".  To account for filtered VMAs,
 mlock_vma_pages_range() returns the number of pages NOT mlocked.  All of the
-callers then subtract a non-negative return value from the task's locked_vm.
-A negative return value represent an error--for example, from get_user_pages()
-attempting to fault in a vma with PROT_NONE access.  In this case, we leave
-the memory range accounted as locked_vm, as the protections could be changed
-later and pages allocated into that region.
+callers then subtract a non-negative return value from the task's locked_vm.  A
+negative return value represent an error - for example, from get_user_pages()
+attempting to fault in a VMA with PROT_NONE access.  In this case, we leave the
+memory range accounted as locked_vm, as the protections could be changed later
+and pages allocated into that region.
 
 
-Mlocked Pages:  munmap()/exit()/exec() System Call Handling
+munmap()/exit()/exec() SYSTEM CALL HANDLING
+-------------------------------------------
 
 When unmapping an mlocked region of memory, whether by an explicit call to
 munmap() or via an internal unmap from exit() or exec() processing, we must
-munlock the pages if we're removing the last VM_LOCKED vma that maps the pages.
+munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
 Before the unevictable/mlock changes, mlocking did not mark the pages in any
 way, so unmapping them required no processing.
 
 To munlock a range of memory under the unevictable/mlock infrastructure, the
-munmap() hander and task address space tear down function call
+munmap() handler and task address space call tear down function
 munlock_vma_pages_all().  The name reflects the observation that one always
-specifies the entire vma range when munlock()ing during unmap of a region.
-Because of the vma filtering when mlocking() regions, only "normal" vmas that
+specifies the entire VMA range when munlock()ing during unmap of a region.
+Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
 actually contain mlocked pages will be passed to munlock_vma_pages_all().
 
-munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup()
+munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
 for the munlock case, calls __munlock_vma_pages_range() to walk the page table
-for the vma's memory range and munlock_vma_page() each resident page mapped by
-the vma.  This effectively munlocks the page, only if this is the last
-VM_LOCKED vma that maps the page.
-
+for the VMA's memory range and munlock_vma_page() each resident page mapped by
+the VMA.  This effectively munlocks the page, only if this is the last
+VM_LOCKED VMA that maps the page.
 
-Mlocked Page:  try_to_unmap()
 
-[Note:  the code changes represented by this section are really quite small
-compared to the text to describe what happening and why, and to discuss the
-implications.]
+try_to_unmap()
+--------------
 
-Pages can, of course, be mapped into multiple vmas.  Some of these vmas may
+Pages can, of course, be mapped into multiple VMAs.  Some of these VMAs may
 have VM_LOCKED flag set.  It is possible for a page mapped into one or more
-VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one
-of the active or inactive LRU lists.  This could happen if, for example, a
-task in the process of munlock()ing the page could not isolate the page from
-the LRU.  As a result, vmscan/shrink_page_list() might encounter such a page
-as described in "Unevictable Pages and Vmscan [shrink_*_list()]".  To
-handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED
-vmas while it is walking a page's reverse map.
+VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
+of the active or inactive LRU lists.  This could happen if, for example, a task
+in the process of munlocking the page could not isolate the page from the LRU.
+As a result, vmscan/shrink_page_list() might encounter such a page as described
+in section "vmscan's handling of unevictable pages".  To handle this situation,
+try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
+map.
 
 try_to_unmap() is always called, by either vmscan for reclaim or for page
-migration, with the argument page locked and isolated from the LRU.  BUG_ON()
-assertions enforce this requirement.  Separate functions handle anonymous and
-mapped file pages, as these types of pages have different reverse map
-mechanisms.
-
-	try_to_unmap_anon()
-
-To unmap anonymous pages, each vma in the list anchored in the anon_vma must be
-visited--at least until a VM_LOCKED vma is encountered.  If the page is being
-unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked
-pages are migratable.  However, for reclaim, if the page is mapped into a
-VM_LOCKED vma, the scan stops.  try_to_unmap() attempts to acquire the mmap
-semphore of the mm_struct to which the vma belongs in read mode.  If this is
-successful, try_to_unmap() will mlock the page via mlock_vma_page()--we
-wouldn't have gotten to try_to_unmap() if the page were already mlocked--and
-will return SWAP_MLOCK, indicating that the page is unevictable.  If the
-mmap semaphore cannot be acquired, we are not sure whether the page is really
-unevictable or not.  In this case, try_to_unmap() will return SWAP_AGAIN.
-
-	try_to_unmap_file() -- linear mappings
-
-Unmapping of a mapped file page works the same, except that the scan visits
-all vmas that maps the page's index/page offset in the page's mapping's
-reverse map priority search tree.  It must also visit each vma in the page's
-mapping's non-linear list, if the list is non-empty.  As for anonymous pages,
-on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will
-attempt to acquire the associated mm_struct's mmap semaphore to mlock the page,
-returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not.
-
-	try_to_unmap_file() -- non-linear mappings
-
-If a page's mapping contains a non-empty non-linear mapping vma list, then
-try_to_un{map|lock}() must also visit each vma in that list to determine
-whether the page is mapped in a VM_LOCKED vma.  Again, the scan must visit
-all vmas in the non-linear list to ensure that the pages is not/should not be
-mlocked.  If a VM_LOCKED vma is found in the list, the scan could terminate.
-However, there is no easy way to determine whether the page is actually mapped
-in a given vma--either for unmapping or testing whether the VM_LOCKED vma
-actually pins the page.
-
-So, try_to_unmap_file() handles non-linear mappings by scanning a certain
-number of pages--a "cluster"--in each non-linear vma associated with the page's
-mapping, for each file mapped page that vmscan tries to unmap.  If this happens
-to unmap the page we're trying to unmap, try_to_unmap() will notice this on
-return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS.  Otherwise, it
-will return SWAP_AGAIN, causing vmscan to recirculate this page.  We take
-advantage of the cluster scan in try_to_unmap_cluster() as follows:
-
-For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap
-semaphore of the associated mm_struct for read without blocking.  If this
-attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will
-retain the mmap semaphore for the scan; otherwise it drops it here.  Then,
-for each page in the cluster, if we're holding the mmap semaphore for a locked
-vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page.  This
-call is a no-op if the page is already locked, but will mlock any pages in
-the non-linear mapping that happen to be unlocked.  If one of the pages so
-mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will
-return SWAP_MLOCK, rather than the default SWAP_AGAIN.  This will allow vmscan
-to cull the page, rather than recirculating it on the inactive list.  Again,
-if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns
-SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but
-couldn't be mlocked.
-
-
-Mlocked pages:  try_to_munlock() Reverse Map Scan
-
-TODO/FIXME:  a better name might be page_mlocked()--analogous to the
-page_referenced() reverse map walker.
-
-When munlock_vma_page()--see "Mlocked Pages:  munlock()/munlockall()
-System Call Handling" above--tries to munlock a page, it needs to
-determine whether or not the page is mapped by any VM_LOCKED vma, without
-actually attempting to unmap all ptes from the page.  For this purpose, the
-unevictable/mlock infrastructure introduced a variant of try_to_unmap() called
-try_to_munlock().
+migration, with the argument page locked and isolated from the LRU.  Separate
+functions handle anonymous and mapped file pages, as these types of pages have
+different reverse map mechanisms.
+
+ (*) try_to_unmap_anon()
+
+     To unmap anonymous pages, each VMA in the list anchored in the anon_vma
+     must be visited - at least until a VM_LOCKED VMA is encountered.  If the
+     page is being unmapped for migration, VM_LOCKED VMAs do not stop the
+     process because mlocked pages are migratable.  However, for reclaim, if
+     the page is mapped into a VM_LOCKED VMA, the scan stops.
+
+     try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+     the mm_struct to which the VMA belongs.  If this is successful, it will
+     mlock the page via mlock_vma_page() - we wouldn't have gotten to
+     try_to_unmap_anon() if the page were already mlocked - and will return
+     SWAP_MLOCK, indicating that the page is unevictable.
+
+     If the mmap semaphore cannot be acquired, we are not sure whether the page
+     is really unevictable or not.  In this case, try_to_unmap_anon() will
+     return SWAP_AGAIN.
+
+ (*) try_to_unmap_file() - linear mappings
+
+     Unmapping of a mapped file page works the same as for anonymous mappings,
+     except that the scan visits all VMAs that map the page's index/page offset
+     in the page's mapping's reverse map priority search tree.  It also visits
+     each VMA in the page's mapping's non-linear list, if the list is
+     non-empty.
+
+     As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file
+     page, try_to_unmap_file() will attempt to acquire the associated
+     mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this
+     is successful, and SWAP_AGAIN, if not.
+
+ (*) try_to_unmap_file() - non-linear mappings
+
+     If a page's mapping contains a non-empty non-linear mapping VMA list, then
+     try_to_un{map|lock}() must also visit each VMA in that list to determine
+     whether the page is mapped in a VM_LOCKED VMA.  Again, the scan must visit
+     all VMAs in the non-linear list to ensure that the pages is not/should not
+     be mlocked.
+
+     If a VM_LOCKED VMA is found in the list, the scan could terminate.
+     However, there is no easy way to determine whether the page is actually
+     mapped in a given VMA - either for unmapping or testing whether the
+     VM_LOCKED VMA actually pins the page.
+
+     try_to_unmap_file() handles non-linear mappings by scanning a certain
+     number of pages - a "cluster" - in each non-linear VMA associated with the
+     page's mapping, for each file mapped page that vmscan tries to unmap.  If
+     this happens to unmap the page we're trying to unmap, try_to_unmap() will
+     notice this on return (page_mapcount(page) will be 0) and return
+     SWAP_SUCCESS.  Otherwise, it will return SWAP_AGAIN, causing vmscan to
+     recirculate this page.  We take advantage of the cluster scan in
+     try_to_unmap_cluster() as follows:
+
+	For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the
+	mmap semaphore of the associated mm_struct for read without blocking.
+
+	If this attempt is successful and the VMA is VM_LOCKED,
+	try_to_unmap_cluster() will retain the mmap semaphore for the scan;
+	otherwise it drops it here.
+
+	Then, for each page in the cluster, if we're holding the mmap semaphore
+	for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to
+	mlock the page.  This call is a no-op if the page is already locked,
+	but will mlock any pages in the non-linear mapping that happen to be
+	unlocked.
+
+	If one of the pages so mlocked is the page passed in to try_to_unmap(),
+	try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default
+	SWAP_AGAIN.  This will allow vmscan to cull the page, rather than
+	recirculating it on the inactive list.
+
+	Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it
+	returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED
+	VMA, but couldn't be mlocked.
+
+
+try_to_munlock() REVERSE MAP SCAN
+---------------------------------
+
+ [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
+     page_referenced() reverse map walker.
+
+When munlock_vma_page() [see section "munlock()/munlockall() System Call
+Handling" above] tries to munlock a page, it needs to determine whether or not
+the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
+all PTEs from the page.  For this purpose, the unevictable/mlock infrastructure
+introduced a variant of try_to_unmap() called try_to_munlock().
 
 try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
 mapped file pages with an additional argument specifing unlock versus unmap
 processing.  Again, these functions walk the respective reverse maps looking
-for VM_LOCKED vmas.  When such a vma is found for anonymous pages and file
+for VM_LOCKED VMAs.  When such a VMA is found for anonymous pages and file
 pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
 attempt to acquire the associated mmap semphore, mlock the page via
 mlock_vma_page() and return SWAP_MLOCK.  This effectively undoes the
 pre-clearing of the page's PG_mlocked done by munlock_vma_page.
 
-If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap
-semaphore, it will return SWAP_AGAIN.  This will allow shrink_page_list()
-to recycle the page on the inactive list and hope that it has better luck
-with the page next time.
-
-For file pages mapped into non-linear vmas, the try_to_munlock() logic works
-slightly differently.  On encountering a VM_LOCKED non-linear vma that might
-map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking
-the page.  munlock_vma_page() will just leave the page unlocked and let
-vmscan deal with it--the usual fallback position.
-
-Note that try_to_munlock()'s reverse map walk must visit every vma in a pages'
-reverse map to determine that a page is NOT mapped into any VM_LOCKED vma.
-However, the scan can terminate when it encounters a VM_LOCKED vma and can
-successfully acquire the vma's mmap semphore for read and mlock the page.
-Although try_to_munlock() can be called many [very many!] times when
-munlock()ing a large region or tearing down a large address space that has been
-mlocked via mlockall(), overall this is a fairly rare event.
-
-Mlocked Page:  Page Reclaim in shrink_*_list()
-
-shrink_active_list() culls any obviously unevictable pages--i.e.,
-!page_evictable(page, NULL)--diverting these to the unevictable lru
-list.  However, shrink_active_list() only sees unevictable pages that
-made it onto the active/inactive lru lists.  Note that these pages do not
-have PageUnevictable set--otherwise, they would be on the unevictable list and
-shrink_active_list would never see them.
+If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap
+semaphore, it will return SWAP_AGAIN.  This will allow shrink_page_list() to
+recycle the page on the inactive list and hope that it has better luck with the
+page next time.
+
+For file pages mapped into non-linear VMAs, the try_to_munlock() logic works
+slightly differently.  On encountering a VM_LOCKED non-linear VMA that might
+map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the
+page.  munlock_vma_page() will just leave the page unlocked and let vmscan deal
+with it - the usual fallback position.
+
+Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
+reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
+However, the scan can terminate when it encounters a VM_LOCKED VMA and can
+successfully acquire the VMA's mmap semphore for read and mlock the page.
+Although try_to_munlock() might be called a great many times when munlocking a
+large region or tearing down a large address space that has been mlocked via
+mlockall(), overall this is a fairly rare event.
+
+
+PAGE RECLAIM IN shrink_*_list()
+-------------------------------
+
+shrink_active_list() culls any obviously unevictable pages - i.e.
+!page_evictable(page, NULL) - diverting these to the unevictable list.
+However, shrink_active_list() only sees unevictable pages that made it onto the
+active/inactive lru lists.  Note that these pages do not have PageUnevictable
+set - otherwise they would be on the unevictable list and shrink_active_list
+would never see them.
 
 Some examples of these unevictable pages on the LRU lists are:
 
-1) ramfs pages that have been placed on the lru lists when first allocated.
+ (1) ramfs pages that have been placed on the LRU lists when first allocated.
+
+ (2) SHM_LOCK'd shared memory pages.  shmctl(SHM_LOCK) does not attempt to
+     allocate or fault in the pages in the shared memory region.  This happens
+     when an application accesses the page the first time after SHM_LOCK'ing
+     the segment.
 
-2) SHM_LOCKed shared memory pages.  shmctl(SHM_LOCK) does not attempt to
-   allocate or fault in the pages in the shared memory region.  This happens
-   when an application accesses the page the first time after SHM_LOCKing
-   the segment.
+ (3) mlocked pages that could not be isolated from the LRU and moved to the
+     unevictable list in mlock_vma_page().
 
-3) Mlocked pages that could not be isolated from the lru and moved to the
-   unevictable list in mlock_vma_page().
+ (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't
+     acquire the VMA's mmap semaphore to test the flags and set PageMlocked.
+     munlock_vma_page() was forced to let the page back on to the normal LRU
+     list for vmscan to handle.
 
-3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't
-   acquire the vma's mmap semaphore to test the flags and set PageMlocked.
-   munlock_vma_page() was forced to let the page back on to the normal
-   LRU list for vmscan to handle.
+shrink_inactive_list() also diverts any unevictable pages that it finds on the
+inactive lists to the appropriate zone's unevictable list.
 
-shrink_inactive_list() also culls any unevictable pages that it finds on
-the inactive lists, again diverting them to the appropriate zone's unevictable
-lru list.  shrink_inactive_list() should only see SHM_LOCKed pages that became
-SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or
-pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from
-the lru to recheck via try_to_munlock().  shrink_inactive_list() won't notice
-the latter, but will pass on to shrink_page_list().
+shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
+after shrink_active_list() had moved them to the inactive list, or pages mapped
+into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
+recheck via try_to_munlock().  shrink_inactive_list() won't notice the latter,
+but will pass on to shrink_page_list().
 
 shrink_page_list() again culls obviously unevictable pages that it could
 encounter for similar reason to shrink_inactive_list().  Pages mapped into
-VM_LOCKED vmas but without PG_mlocked set will make it all the way to
+VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
 try_to_unmap().  shrink_page_list() will divert them to the unevictable list
 when try_to_unmap() returns SWAP_MLOCK, as discussed above.
-- 
GitLab


From 7b102d034c0affc6ee703b576f2496ec6cb81d79 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 13 Apr 2009 14:40:02 -0700
Subject: [PATCH 0131/1421] MAINTAINERS: bluesmoke-devel list is moderated for
 non-subscribers

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 00ca6156332..fbdb80937de 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1894,7 +1894,7 @@ F:	fs/ecryptfs/
 EDAC-CORE
 P:	Doug Thompson
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	Documentation/edac.txt
@@ -1906,7 +1906,7 @@ P:	Mark Gross
 P:	Doug Thompson
 M:	mark.gross@intel.com
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
@@ -1914,7 +1914,7 @@ F:	drivers/edac/e752x_edac.c
 EDAC-E7XXX
 P:	Doug Thompson
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
@@ -1922,7 +1922,7 @@ F:	drivers/edac/e7xxx_edac.c
 EDAC-I82443BXGX
 P:	Tim Small
 M:	tim@buttersideup.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
@@ -1930,7 +1930,7 @@ F:	drivers/edac/i82443bxgx_edac.c
 EDAC-I3000
 P:	Jason Uhlenkott
 M:	juhlenko@akamai.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
@@ -1938,7 +1938,7 @@ F:	drivers/edac/i3000_edac.c
 EDAC-I5000
 P:	Doug Thompson
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
@@ -1946,7 +1946,7 @@ F:	drivers/edac/i5000_edac.c
 EDAC-I5400
 P:	Mauro Carvalho Chehab
 M:	mchehab@redhat.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
@@ -1956,7 +1956,7 @@ P:	Ranganathan Desikan
 P:	Arvind R.
 M:	rdesikan@jetzbroadband.com
 M:	arvind@acarlab.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
@@ -1964,7 +1964,7 @@ F:	drivers/edac/i82975x_edac.c
 EDAC-PASEMI
 P:	Egor Martovetsky
 M:	egor@pasemi.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
@@ -1972,7 +1972,7 @@ F:	drivers/edac/pasemi_edac.c
 EDAC-R82600
 P:	Tim Small
 M:	tim@buttersideup.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
-- 
GitLab


From f1671f6d783a2385d32e11f456cbe32f0e4b4b49 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Mon, 13 Apr 2009 14:40:03 -0700
Subject: [PATCH 0132/1421] ptrace: fix exit_ptrace() vs ptrace_traceme() race

Pointed out by Roland.  The bug was recently introduced by me in
"forget_original_parent: split out the un-ptrace part", commit
39c626ae47c469abdfd30c6e42eff884931380d6.

Since that patch we have a window after exit_ptrace() drops tasklist and
before forget_original_parent() takes it again.  In this window the child
can do ptrace(PTRACE_TRACEME) and nobody can untrace this child after
that.

Change ptrace_traceme() to not attach to the exiting ->real_parent.  We
don't report the error in this case, we pretend we attach right before
->real_parent calls exit_ptrace() which should untrace us anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/ptrace.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 64191fa09b7..dfcd83ceee3 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -604,10 +604,11 @@ repeat:
 		ret = security_ptrace_traceme(current->parent);
 
 		/*
-		 * Set the ptrace bit in the process ptrace flags.
-		 * Then link us on our parent's ptraced list.
+		 * Check PF_EXITING to ensure ->real_parent has not passed
+		 * exit_ptrace(). Otherwise we don't report the error but
+		 * pretend ->real_parent untraces us right after return.
 		 */
-		if (!ret) {
+		if (!ret && !(current->real_parent->flags & PF_EXITING)) {
 			current->ptrace |= PT_PTRACED;
 			__ptrace_link(current, current->real_parent);
 		}
-- 
GitLab


From d20d5a7456d57d8affa88f45f27ae96ea49c29e4 Mon Sep 17 00:00:00 2001
From: Randy Robertson <rmrobert@vmware.com>
Date: Mon, 13 Apr 2009 14:40:04 -0700
Subject: [PATCH 0133/1421] initramfs: fix initramfs to work with hardlinked
 init

Change cb6ff208076b5f434db1b8c983429269d719cef5 ("NOMMU: Support XIP on
initramfs") seems to have broken booting from initramfs with /sbin/init
being a hardlink.

It seems like the logic required for XIP on nommu, i.e.  ftruncate to
reported cpio header file size (body_len) is broken for hardlinks, which
have a reported size of 0, and the truncate thus nukes the contents of the
file (in my case busybox), making boot impossible and ending with runaway
loop modprobe binfmt-0000 - and of course 0000 is not a valid binary
format.

My fix is to only call ftruncate if size is non-zero which fixes things
for me, but I'm not certain whether this will break XIP for those files on
nommu systems, although I would guess not.

Signed-off-by: Randy Robertson <rmrobert@vmware.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/initramfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/init/initramfs.c b/init/initramfs.c
index e44f2d932cc..9ee7b781041 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -310,7 +310,8 @@ static int __init do_name(void)
 			if (wfd >= 0) {
 				sys_fchown(wfd, uid, gid);
 				sys_fchmod(wfd, mode);
-				sys_ftruncate(wfd, body_len);
+				if (body_len)
+					sys_ftruncate(wfd, body_len);
 				vcollected = kstrdup(collected, GFP_KERNEL);
 				state = CopyFile;
 			}
-- 
GitLab


From 9de100d001564f58c3fb2ec1bd03e540ac0aa357 Mon Sep 17 00:00:00 2001
From: Andy Grover <andy.grover@oracle.com>
Date: Mon, 13 Apr 2009 14:40:05 -0700
Subject: [PATCH 0134/1421] mm: document get_user_pages_fast()

While better than get_user_pages(), the usage of gupf(), especially the
return values and the fact that it can potentially only partially pin the
range, warranted some documentation.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/util.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/mm/util.c b/mm/util.c
index 2599e83eea1..55bef160b9f 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -223,6 +223,22 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 }
 #endif
 
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start:	starting user address
+ * @nr_pages:	number of pages from start to pin
+ * @write:	whether pages will be written to
+ * @pages:	array that receives pointers to the pages pinned.
+ *		Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
 int __attribute__((weak)) get_user_pages_fast(unsigned long start,
 				int nr_pages, int write, struct page **pages)
 {
-- 
GitLab


From 32433879480d13bc019d5a067ce884064a93dd63 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Mon, 13 Apr 2009 14:40:06 -0700
Subject: [PATCH 0135/1421] jbd: update locking coments

Update information about locking in JBD revoke code.

Reported-by: Lin Tan <tammy000@gmail.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/revoke.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index c7bd649bbbd..3e9afc2a91d 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -55,6 +55,25 @@
  *			need do nothing.
  * RevokeValid set, Revoked set:
  *			buffer has been revoked.
+ *
+ * Locking rules:
+ * We keep two hash tables of revoke records. One hashtable belongs to the
+ * running transaction (is pointed to by journal->j_revoke), the other one
+ * belongs to the committing transaction. Accesses to the second hash table
+ * happen only from the kjournald and no other thread touches this table.  Also
+ * journal_switch_revoke_table() which switches which hashtable belongs to the
+ * running and which to the committing transaction is called only from
+ * kjournald. Therefore we need no locks when accessing the hashtable belonging
+ * to the committing transaction.
+ *
+ * All users operating on the hash table belonging to the running transaction
+ * have a handle to the transaction. Therefore they are safe from kjournald
+ * switching hash tables under them. For operations on the lists of entries in
+ * the hash table j_revoke_lock is used.
+ *
+ * Finally, also replay code uses the hash tables but at this moment noone else
+ * can touch them (filesystem isn't mounted yet) and hence no locking is
+ * needed.
  */
 
 #ifndef __KERNEL__
@@ -402,8 +421,6 @@ int journal_revoke(handle_t *handle, unsigned long blocknr,
  * the second time we would still have a pending revoke to cancel.  So,
  * do not trust the Revoked bit on buffers unless RevokeValid is also
  * set.
- *
- * The caller must have the journal locked.
  */
 int journal_cancel_revoke(handle_t *handle, struct journal_head *jh)
 {
@@ -481,10 +498,7 @@ void journal_switch_revoke_table(journal_t *journal)
 /*
  * Write revoke records to the journal for all entries in the current
  * revoke hash, deleting the entries as we go.
- *
- * Called with the journal lock held.
  */
-
 void journal_write_revoke_records(journal_t *journal,
 				  transaction_t *transaction)
 {
-- 
GitLab


From 280ca299dea58180a59ec4b146595211b280f598 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Mon, 13 Apr 2009 14:40:06 -0700
Subject: [PATCH 0136/1421] at24: make input buffers of at24_*write() const

| drivers/misc/eeprom/at24.c:508: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/eeprom/at24.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index d184dfab963..db39f4a52f5 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -278,7 +278,7 @@ static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
  * We only use page mode writes; the alternative is sloooow. This routine
  * writes at most one page.
  */
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf,
 		unsigned offset, size_t count)
 {
 	struct i2c_client *client;
@@ -347,8 +347,8 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
 	return -ETIMEDOUT;
 }
 
-static ssize_t at24_write(struct at24_data *at24,
-		char *buf, loff_t off, size_t count)
+static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
+			  size_t count)
 {
 	ssize_t retval = 0;
 
@@ -406,7 +406,7 @@ static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf,
 	return at24_read(at24, buf, offset, count);
 }
 
-static ssize_t at24_macc_write(struct memory_accessor *macc, char *buf,
+static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
 			  off_t offset, size_t count)
 {
 	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-- 
GitLab


From 4cafbd0b94d2c8cae6ede6d1c3ab90547547a3d2 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Mon, 13 Apr 2009 14:40:07 -0700
Subject: [PATCH 0137/1421] at25: make input buffers of at25_*write() const

| drivers/misc/eeprom/at25.c:358: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/eeprom/at25.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 6bc0dac5c1e..b34cb5f79ee 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -140,7 +140,8 @@ at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 
 
 static ssize_t
-at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
+	      size_t count)
 {
 	ssize_t			status = 0;
 	unsigned		written = 0;
@@ -276,7 +277,7 @@ static ssize_t at25_mem_read(struct memory_accessor *mem, char *buf,
 	return at25_ee_read(at25, buf, offset, count);
 }
 
-static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf,
+static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
 			  off_t offset, size_t count)
 {
 	struct at25_data *at25 = container_of(mem, struct at25_data, mem);
-- 
GitLab


From 3d26dcf7679c5cc6c9f3b95ffdb2152fba2b7fae Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Mon, 13 Apr 2009 14:40:08 -0700
Subject: [PATCH 0138/1421] kernel/sys.c: clean up sys_shutdown exit path

Impact: cleanup, fix

Clean up sys_shutdown() exit path.  Factor out common code.  Return
correct error code instead of always 0 on failure.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sys.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 51dbb55604e..e7998cf3149 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -360,6 +360,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 		void __user *, arg)
 {
 	char buffer[256];
+	int ret = 0;
 
 	/* We only trust the superuser with rebooting the system. */
 	if (!capable(CAP_SYS_BOOT))
@@ -397,7 +398,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 		kernel_halt();
 		unlock_kernel();
 		do_exit(0);
-		break;
+		panic("cannot halt");
 
 	case LINUX_REBOOT_CMD_POWER_OFF:
 		kernel_power_off();
@@ -417,29 +418,22 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 
 #ifdef CONFIG_KEXEC
 	case LINUX_REBOOT_CMD_KEXEC:
-		{
-			int ret;
-			ret = kernel_kexec();
-			unlock_kernel();
-			return ret;
-		}
+		ret = kernel_kexec();
+		break;
 #endif
 
 #ifdef CONFIG_HIBERNATION
 	case LINUX_REBOOT_CMD_SW_SUSPEND:
-		{
-			int ret = hibernate();
-			unlock_kernel();
-			return ret;
-		}
+		ret = hibernate();
+		break;
 #endif
 
 	default:
-		unlock_kernel();
-		return -EINVAL;
+		ret = -EINVAL;
+		break;
 	}
 	unlock_kernel();
-	return 0;
+	return ret;
 }
 
 static void deferred_cad(struct work_struct *dummy)
-- 
GitLab


From a8031cb00e286600ea08bd00a6812dbfec412376 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Mon, 13 Apr 2009 14:40:08 -0700
Subject: [PATCH 0139/1421] memcg: remove warning when CONFIG_DEBUG_VM=n

mm/memcontrol.c:318: warning: `mem_cgroup_is_obsolete' defined but not used

[akpm@linux-foundation.org: simplify as suggested by Balbir]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2fc6d6c4823..e44fb0fbb80 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -932,7 +932,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 	if (unlikely(!mem))
 		return 0;
 
-	VM_BUG_ON(mem_cgroup_is_obsolete(mem));
+	VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
 
 	while (1) {
 		int ret;
-- 
GitLab


From a55ce6dc705c9ed0bb0d4f629dbcaf3b3ced5172 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Mon, 13 Apr 2009 14:40:09 -0700
Subject: [PATCH 0140/1421] mm: add documentation describing what
 tsk->active_mm means vs tsk->mm

I'm sure everyone knows this, but I didn't, so I googled it, and found a
nice explanation from Linus.  Might be worth sticking in Documentation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/vm/00-INDEX      |  2 +
 Documentation/vm/active_mm.txt | 83 ++++++++++++++++++++++++++++++++++
 2 files changed, 85 insertions(+)
 create mode 100644 Documentation/vm/active_mm.txt

diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index 2131b00b63f..2f77ced35df 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -1,5 +1,7 @@
 00-INDEX
 	- this file.
+active_mm.txt
+	- An explanation from Linus about tsk->active_mm vs tsk->mm.
 balance
 	- various information on memory balancing.
 hugetlbpage.txt
diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt
new file mode 100644
index 00000000000..4ee1f643d89
--- /dev/null
+++ b/Documentation/vm/active_mm.txt
@@ -0,0 +1,83 @@
+List:       linux-kernel
+Subject:    Re: active_mm
+From:       Linus Torvalds <torvalds () transmeta ! com>
+Date:       1999-07-30 21:36:24
+
+Cc'd to linux-kernel, because I don't write explanations all that often,
+and when I do I feel better about more people reading them.
+
+On Fri, 30 Jul 1999, David Mosberger wrote:
+>
+> Is there a brief description someplace on how "mm" vs. "active_mm" in
+> the task_struct are supposed to be used?  (My apologies if this was
+> discussed on the mailing lists---I just returned from vacation and
+> wasn't able to follow linux-kernel for a while).
+
+Basically, the new setup is:
+
+ - we have "real address spaces" and "anonymous address spaces". The
+   difference is that an anonymous address space doesn't care about the
+   user-level page tables at all, so when we do a context switch into an
+   anonymous address space we just leave the previous address space
+   active.
+
+   The obvious use for a "anonymous address space" is any thread that
+   doesn't need any user mappings - all kernel threads basically fall into
+   this category, but even "real" threads can temporarily say that for
+   some amount of time they are not going to be interested in user space,
+   and that the scheduler might as well try to avoid wasting time on
+   switching the VM state around. Currently only the old-style bdflush
+   sync does that.
+
+ - "tsk->mm" points to the "real address space". For an anonymous process,
+   tsk->mm will be NULL, for the logical reason that an anonymous process
+   really doesn't _have_ a real address space at all.
+
+ - however, we obviously need to keep track of which address space we
+   "stole" for such an anonymous user. For that, we have "tsk->active_mm",
+   which shows what the currently active address space is.
+
+   The rule is that for a process with a real address space (ie tsk->mm is
+   non-NULL) the active_mm obviously always has to be the same as the real
+   one.
+
+   For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the
+   "borrowed" mm while the anonymous process is running. When the
+   anonymous process gets scheduled away, the borrowed address space is
+   returned and cleared.
+
+To support all that, the "struct mm_struct" now has two counters: a
+"mm_users" counter that is how many "real address space users" there are,
+and a "mm_count" counter that is the number of "lazy" users (ie anonymous
+users) plus one if there are any real users.
+
+Usually there is at least one real user, but it could be that the real
+user exited on another CPU while a lazy user was still active, so you do
+actually get cases where you have a address space that is _only_ used by
+lazy users. That is often a short-lived state, because once that thread
+gets scheduled away in favour of a real thread, the "zombie" mm gets
+released because "mm_users" becomes zero.
+
+Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any
+more. "init_mm" should be considered just a "lazy context when no other
+context is available", and in fact it is mainly used just at bootup when
+no real VM has yet been created. So code that used to check
+
+	if (current->mm == &init_mm)
+
+should generally just do
+
+	if (!current->mm)
+
+instead (which makes more sense anyway - the test is basically one of "do
+we have a user context", and is generally done by the page fault handler
+and things like that).
+
+Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
+because it slightly changes the interfaces to accomodate the alpha (who
+would have thought it, but the alpha actually ends up having one of the
+ugliest context switch codes - unlike the other architectures where the MM
+and register state is separate, the alpha PALcode joins the two, and you
+need to switch both together).
+
+(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2)
-- 
GitLab


From 347486bb108fa6e0fd2753c1be3519d6be2516ed Mon Sep 17 00:00:00 2001
From: Stefan Husemann <shusemann@googlemail.com>
Date: Mon, 13 Apr 2009 14:40:10 -0700
Subject: [PATCH 0141/1421] intelfb: support i854

Support the Intel 854 Chipset in fbdev.

We test and use the patch on a Thomson IP1101 IPTV-Box.  On the VGA-Port
we get a normal signal.

Here is the link to the Mambux-Project: http://www.mambux.de

Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Stefan Husemann <shusemann@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/agp/intel-agp.c        | 3 +++
 drivers/video/intelfb/intelfb.h     | 2 ++
 drivers/video/intelfb/intelfb_i2c.c | 1 +
 drivers/video/intelfb/intelfbdrv.c  | 1 +
 drivers/video/intelfb/intelfbhw.c   | 5 +++++
 include/drm/drm_pciids.h            | 2 ++
 include/linux/pci_ids.h             | 2 ++
 7 files changed, 16 insertions(+)

diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 9d9490e22e0..3686912427b 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -2131,6 +2131,8 @@ static const struct intel_driver_description {
 	{ PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M",
 		&intel_845_driver, &intel_830_driver },
 	{ PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL },
+	{ PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854",
+		&intel_845_driver, &intel_830_driver },
 	{ PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL },
 	{ PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM",
 		&intel_845_driver, &intel_830_driver },
@@ -2355,6 +2357,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_82845_HB),
 	ID(PCI_DEVICE_ID_INTEL_82845G_HB),
 	ID(PCI_DEVICE_ID_INTEL_82850_HB),
+	ID(PCI_DEVICE_ID_INTEL_82854_HB),
 	ID(PCI_DEVICE_ID_INTEL_82855PM_HB),
 	ID(PCI_DEVICE_ID_INTEL_82855GM_HB),
 	ID(PCI_DEVICE_ID_INTEL_82860_HB),
diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h
index a50bea61480..40984551c92 100644
--- a/drivers/video/intelfb/intelfb.h
+++ b/drivers/video/intelfb/intelfb.h
@@ -53,6 +53,7 @@
 #define PCI_DEVICE_ID_INTEL_830M	0x3577
 #define PCI_DEVICE_ID_INTEL_845G	0x2562
 #define PCI_DEVICE_ID_INTEL_85XGM	0x3582
+#define PCI_DEVICE_ID_INTEL_854		0x358E
 #define PCI_DEVICE_ID_INTEL_865G	0x2572
 #define PCI_DEVICE_ID_INTEL_915G	0x2582
 #define PCI_DEVICE_ID_INTEL_915GM	0x2592
@@ -154,6 +155,7 @@ enum intel_chips {
 	INTEL_85XGM,
 	INTEL_852GM,
 	INTEL_852GME,
+	INTEL_854,
 	INTEL_855GM,
 	INTEL_855GME,
 	INTEL_865G,
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index b3065492bb2..487f2be4746 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -156,6 +156,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
 	switch(dinfo->chipset) {
 	case INTEL_830M:
 	case INTEL_845G:
+	case INTEL_854:
 	case INTEL_855GM:
 	case INTEL_865G:
 		dinfo->output[i].type = INTELFB_OUTPUT_DVO;
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index 6d8e5415c80..ace14fe02fc 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -182,6 +182,7 @@ static struct pci_device_id intelfb_pci_table[] __devinitdata = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c
index 8b26b27c2db..0689f97c523 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/intelfb/intelfbhw.c
@@ -84,6 +84,11 @@ int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
 		dinfo->mobile = 0;
 		dinfo->pll_index = PLLS_I8xx;
 		return 0;
+	case PCI_DEVICE_ID_INTEL_854:
+		dinfo->mobile = 1;
+		dinfo->name = "Intel(R) 854";
+		dinfo->chipset = INTEL_854;
+		return 0;
 	case PCI_DEVICE_ID_INTEL_85XGM:
 		tmp = 0;
 		dinfo->mobile = 1;
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 2df74eb0956..9477af01a63 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -472,6 +472,7 @@
 	{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}
 
 #define gamma_PCI_IDS \
@@ -533,4 +534,5 @@
 	{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0, 0, 0}
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ee98cd57088..06ba90c211a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2514,6 +2514,8 @@
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
 #define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
 #define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB	0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG	0x358e
 #define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
 #define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
 #define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
-- 
GitLab


From 61609d01cbb3ab865c8cccaf85e6837c47096480 Mon Sep 17 00:00:00 2001
From: Yuri Tikhonov <yur@emcraft.com>
Date: Mon, 13 Apr 2009 14:40:11 -0700
Subject: [PATCH 0142/1421] shmem: fix division by zero

Fix a division by zero which we have in shmem_truncate_range() and
shmem_unuse_inode() when using big PAGE_SIZE values (e.g.  256kB on
ppc44x).

With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large
(0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type
from 'unsigned long' to 'unsigned long long'.

Hugh: reverted its unsigned long longs in shmem_truncate_range() and
shmem_getpage(): the pagecache index cannot be more than an unsigned long,
so the divisions by zero occurred in unreached code.  It's a pity we need
any ULL arithmetic here, but I found no pretty way to avoid it.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/shmem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/shmem.c b/mm/shmem.c
index d94d2e9146b..28024ce8b8f 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -66,7 +66,7 @@ static struct vfsmount *shm_mnt;
 #include <asm/pgtable.h>
 
 #define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
-#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
+#define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
 #define BLOCKS_PER_PAGE  (PAGE_CACHE_SIZE/512)
 
 #define SHMEM_MAX_INDEX  (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
-- 
GitLab


From caefba1740d8016e6dfe8fda84f85bdcb8f8c85d Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Mon, 13 Apr 2009 14:40:12 -0700
Subject: [PATCH 0143/1421] shmem: respect MAX_LFS_FILESIZE

SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect
swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account.
Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to
grow slightly bigger than that supposed maximum.

Fix this by using the min of both (at build time not run time).  And it
happens that this calculation is good as far as 8MB pages on 32-bit or
16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that,
it's truncated to such large numbers that we don't need to care.

[akpm@linux-foundation.org: it needs pagemap.h]
[akpm@linux-foundation.org: fix sparc64 min() warnings]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/shmem.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/mm/shmem.c b/mm/shmem.c
index 28024ce8b8f..f9cb20ebb99 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/vfs.h>
 #include <linux/mount.h>
+#include <linux/pagemap.h>
 #include <linux/file.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -43,7 +44,6 @@ static struct vfsmount *shm_mnt;
 #include <linux/exportfs.h>
 #include <linux/generic_acl.h>
 #include <linux/mman.h>
-#include <linux/pagemap.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/backing-dev.h>
@@ -65,13 +65,28 @@ static struct vfsmount *shm_mnt;
 #include <asm/div64.h>
 #include <asm/pgtable.h>
 
+/*
+ * The maximum size of a shmem/tmpfs file is limited by the maximum size of
+ * its triple-indirect swap vector - see illustration at shmem_swp_entry().
+ *
+ * With 4kB page size, maximum file size is just over 2TB on a 32-bit kernel,
+ * but one eighth of that on a 64-bit kernel.  With 8kB page size, maximum
+ * file size is just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
+ * MAX_LFS_FILESIZE being then more restrictive than swap vector layout.
+ *
+ * We use / and * instead of shifts in the definitions below, so that the swap
+ * vector can be tested with small even values (e.g. 20) for ENTRIES_PER_PAGE.
+ */
 #define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
 #define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define BLOCKS_PER_PAGE  (PAGE_CACHE_SIZE/512)
 
-#define SHMEM_MAX_INDEX  (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
-#define SHMEM_MAX_BYTES  ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMSWP_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
+#define SHMSWP_MAX_BYTES (SHMSWP_MAX_INDEX << PAGE_CACHE_SHIFT)
 
+#define SHMEM_MAX_BYTES  min_t(unsigned long long, SHMSWP_MAX_BYTES, MAX_LFS_FILESIZE)
+#define SHMEM_MAX_INDEX  ((unsigned long)((SHMEM_MAX_BYTES+1) >> PAGE_CACHE_SHIFT))
+
+#define BLOCKS_PER_PAGE  (PAGE_CACHE_SIZE/512)
 #define VM_ACCT(size)    (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT)
 
 /* info->flags needs VM_flags to handle pagein/truncate races efficiently */
@@ -2581,7 +2596,7 @@ int shmem_unuse(swp_entry_t entry, struct page *page)
 #define shmem_get_inode(sb, mode, dev, flags)	ramfs_get_inode(sb, mode, dev)
 #define shmem_acct_size(flags, size)		0
 #define shmem_unacct_size(flags, size)		do {} while (0)
-#define SHMEM_MAX_BYTES				LLONG_MAX
+#define SHMEM_MAX_BYTES				MAX_LFS_FILESIZE
 
 #endif /* CONFIG_SHMEM */
 
-- 
GitLab


From 316cb4ef3eb2ad6e35e15cc56d39c6cda58c093a Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Mon, 13 Apr 2009 14:40:14 -0700
Subject: [PATCH 0144/1421] ext2: fix data corruption for racing writes

If two writers allocating blocks to file race with each other (e.g.
because writepages races with ordinary write or two writepages race with
each other), ext2_getblock() can be called on the same inode in parallel.
Before we are going to allocate new blocks, we have to recheck the block
chain we have obtained so far without holding truncate_mutex.  Otherwise
we could overwrite the indirect block pointer set by the other writer
leading to data loss.

The below test program by Ying is able to reproduce the data loss with ext2
on in BRD in a few minutes if the machine is under memory pressure:

long kMemSize  = 50 << 20;
int kPageSize = 4096;

int main(int argc, char **argv) {
	int status;
	int count = 0;
	int i;
	char *fname = "/mnt/test.mmap";
	char *mem;
	unlink(fname);
	int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600);
	status = ftruncate(fd, kMemSize);
	mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
	// Fill the memory with 1s.
	memset(mem, 1, kMemSize);
	sleep(2);
	for (i = 0; i < kMemSize; i++) {
		int byte_good = mem[i] != 0;
		if (!byte_good && ((i % kPageSize) == 0)) {
			//printf("%d ", i / kPageSize);
			count++;
		}
	}
	munmap(mem, kMemSize);
	close(fd);
	unlink(fname);

	if (count > 0) {
		printf("Running %d bad page\n", count);
		return 1;
	}
	return 0;
}

Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext2/inode.c | 44 +++++++++++++++++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 11 deletions(-)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index b43b9556366..acf67883110 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -590,9 +590,8 @@ static int ext2_get_blocks(struct inode *inode,
 
 	if (depth == 0)
 		return (err);
-reread:
-	partial = ext2_get_branch(inode, depth, offsets, chain, &err);
 
+	partial = ext2_get_branch(inode, depth, offsets, chain, &err);
 	/* Simplest case - block found, no allocation needed */
 	if (!partial) {
 		first_block = le32_to_cpu(chain[depth - 1].key);
@@ -602,15 +601,16 @@ reread:
 		while (count < maxblocks && count <= blocks_to_boundary) {
 			ext2_fsblk_t blk;
 
-			if (!verify_chain(chain, partial)) {
+			if (!verify_chain(chain, chain + depth - 1)) {
 				/*
 				 * Indirect block might be removed by
 				 * truncate while we were reading it.
 				 * Handling of that case: forget what we've
 				 * got now, go to reread.
 				 */
+				err = -EAGAIN;
 				count = 0;
-				goto changed;
+				break;
 			}
 			blk = le32_to_cpu(*(chain[depth-1].p + count));
 			if (blk == first_block + count)
@@ -618,7 +618,8 @@ reread:
 			else
 				break;
 		}
-		goto got_it;
+		if (err != -EAGAIN)
+			goto got_it;
 	}
 
 	/* Next simple case - plain lookup or failed read of indirect block */
@@ -626,6 +627,33 @@ reread:
 		goto cleanup;
 
 	mutex_lock(&ei->truncate_mutex);
+	/*
+	 * If the indirect block is missing while we are reading
+	 * the chain(ext3_get_branch() returns -EAGAIN err), or
+	 * if the chain has been changed after we grab the semaphore,
+	 * (either because another process truncated this branch, or
+	 * another get_block allocated this branch) re-grab the chain to see if
+	 * the request block has been allocated or not.
+	 *
+	 * Since we already block the truncate/other get_block
+	 * at this point, we will have the current copy of the chain when we
+	 * splice the branch into the tree.
+	 */
+	if (err == -EAGAIN || !verify_chain(chain, partial)) {
+		while (partial > chain) {
+			brelse(partial->bh);
+			partial--;
+		}
+		partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+		if (!partial) {
+			count++;
+			mutex_unlock(&ei->truncate_mutex);
+			if (err)
+				goto cleanup;
+			clear_buffer_new(bh_result);
+			goto got_it;
+		}
+	}
 
 	/*
 	 * Okay, we need to do block allocation.  Lazily initialize the block
@@ -683,12 +711,6 @@ cleanup:
 		partial--;
 	}
 	return err;
-changed:
-	while (partial > chain) {
-		brelse(partial->bh);
-		partial--;
-	}
-	goto reread;
 }
 
 int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
-- 
GitLab


From e930438c42e744ef1f8bfdbb338253c9f384df42 Mon Sep 17 00:00:00 2001
From: Yang Hongyang <yanghy@cn.fujitsu.com>
Date: Mon, 13 Apr 2009 14:40:14 -0700
Subject: [PATCH 0145/1421] Replace all DMA_nBIT_MASK macro with
 DMA_BIT_MASK(n)

This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/usb-musb.c      |  8 ++++----
 arch/ia64/kernel/pci-swiotlb.c      |  2 +-
 drivers/atm/solos-pci.c             |  2 +-
 drivers/block/cciss.c               |  2 +-
 drivers/net/atl1c/atl1c_main.c      |  4 ++--
 drivers/net/benet/be_main.c         |  4 ++--
 drivers/net/jme.c                   |  8 ++++----
 drivers/net/wireless/ath9k/pci.c    |  4 ++--
 drivers/net/wireless/p54/p54pci.c   |  4 ++--
 drivers/scsi/3w-9xxx.c              |  8 ++++----
 drivers/scsi/aacraid/aachba.c       |  2 +-
 drivers/scsi/mpt2sas/mpt2sas_base.c | 10 +++++-----
 drivers/staging/b3dfg/b3dfg.c       |  2 +-
 drivers/usb/otg/nop-usb-xceiv.c     |  4 ++--
 sound/pci/hda/hda_intel.c           |  8 ++++----
 15 files changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index fc74e913c41..34a56a136ef 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -131,14 +131,14 @@ static struct musb_hdrc_platform_data musb_plat = {
 	.power		= 50,			/* up to 100 mA */
 };
 
-static u64 musb_dmamask = DMA_32BIT_MASK;
+static u64 musb_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device musb_device = {
 	.name		= "musb_hdrc",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &musb_plat,
 	},
 	.num_resources	= ARRAY_SIZE(musb_resources),
@@ -146,14 +146,14 @@ static struct platform_device musb_device = {
 };
 
 #ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device nop_xceiv_device = {
 	.name		= "nop_usb_xceiv",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &nop_xceiv_dmamask,
-		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= NULL,
 	},
 };
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 573f02c39a0..285aae8431c 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -16,7 +16,7 @@ EXPORT_SYMBOL(swiotlb);
 static void *ia64_swiotlb_alloc_coherent(struct device *dev, size_t size,
 					 dma_addr_t *dma_handle, gfp_t gfp)
 {
-	if (dev->coherent_dma_mask != DMA_64BIT_MASK)
+	if (dev->coherent_dma_mask != DMA_BIT_MASK(64))
 		gfp |= GFP_DMA;
 	return swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
 }
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index be204308cc1..9359613addc 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -1059,7 +1059,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto out;
 	}
 
-	err = pci_set_dma_mask(dev, DMA_32BIT_MASK);
+	err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
 	if (err) {
 		dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
 		goto out;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 0ef6f08aa6e..4d4d5e0d3fa 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3505,7 +3505,7 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u
 	/* The Inbound Post Queue only accepts 32-bit physical addresses for the
 	   CCISS commands, so they must be allocated from the lower 4GiB of
 	   memory. */
-	err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (err) {
 		iounmap(vaddr);
 		return -ENOMEM;
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index deb7b53167e..83a12125b94 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -2532,8 +2532,8 @@ static int __devinit atl1c_probe(struct pci_dev *pdev,
 	 * various kernel subsystems to support the mechanics required by a
 	 * fixed-high-32-bit system.
 	 */
-	if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
-	    (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+	if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+	    (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
 		dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
 		goto err_dma;
 	}
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 9b75aa63006..30d0c81c989 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1821,11 +1821,11 @@ static int __devinit be_probe(struct pci_dev *pdev,
 
 	be_msix_enable(adapter);
 
-	status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+	status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
 	if (!status) {
 		netdev->features |= NETIF_F_HIGHDMA;
 	} else {
-		status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (status) {
 			dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
 			goto free_netdev;
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index ece35040288..621a7c0c46b 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2591,13 +2591,13 @@ static int
 jme_pci_dma64(struct pci_dev *pdev)
 {
 	if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
-	    !pci_set_dma_mask(pdev, DMA_64BIT_MASK))
-		if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+		if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
 			return 1;
 
 	if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
-	    !pci_set_dma_mask(pdev, DMA_40BIT_MASK))
-		if (!pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK))
+	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(40)))
+		if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)))
 			return 1;
 
 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c
index 6dbc58580ab..168411d322a 100644
--- a/drivers/net/wireless/ath9k/pci.c
+++ b/drivers/net/wireless/ath9k/pci.c
@@ -93,14 +93,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (pci_enable_device(pdev))
 		return -EIO;
 
-	ret =  pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	ret =  pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 
 	if (ret) {
 		printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
 		goto bad;
 	}
 
-	ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 
 	if (ret) {
 		printk(KERN_ERR "ath9k: 32-bit DMA consistent "
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index e3569a0a952..b1610ea4bb3 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -492,8 +492,8 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 		goto err_disable_dev;
 	}
 
-	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
-	    pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+	    pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		dev_err(&pdev->dev, "No suitable DMA available\n");
 		goto err_free_reg;
 	}
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index fdb14ec4fd4..8b7983aba8f 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2234,10 +2234,10 @@ static int twa_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
-	if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
-	    || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
-		if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
-		    || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+	    || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+		    || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
 			TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
 			retval = -ENODEV;
 			goto out_disable_device;
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 280261c451d..2a889853a10 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1378,7 +1378,7 @@ int aac_get_adapter_info(struct aac_dev* dev)
 	if (dev->nondasd_support && !dev->in_reset)
 		printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
 
-	if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK)
+	if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
 		dev->needs_dac = 1;
 	dev->dac_support = 0;
 	if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 52427a8324f..a91f5143cea 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -855,9 +855,9 @@ _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
 	if (sizeof(dma_addr_t) > 4) {
 		const uint64_t required_mask =
 		    dma_get_required_mask(&pdev->dev);
-		if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev,
-		    DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev,
-		    DMA_64BIT_MASK)) {
+		if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
+		    DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
+		    DMA_BIT_MASK(64))) {
 			ioc->base_add_sg_single = &_base_add_sg_single_64;
 			ioc->sge_size = sizeof(Mpi2SGESimple64_t);
 			desc = "64";
@@ -865,8 +865,8 @@ _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
 		}
 	}
 
-	if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
-	    && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+	    && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		ioc->base_add_sg_single = &_base_add_sg_single_32;
 		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
 		desc = "32";
diff --git a/drivers/staging/b3dfg/b3dfg.c b/drivers/staging/b3dfg/b3dfg.c
index 0348072b3ab..75ebe338c6f 100644
--- a/drivers/staging/b3dfg/b3dfg.c
+++ b/drivers/staging/b3dfg/b3dfg.c
@@ -1000,7 +1000,7 @@ static int __devinit b3dfg_probe(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	r = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	r = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (r) {
 		dev_err(&pdev->dev, "no usable DMA configuration\n");
 		goto err_free_res;
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 4b933f646f2..c567168f89a 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -36,14 +36,14 @@ struct nop_usb_xceiv {
 	struct device		*dev;
 };
 
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device nop_xceiv_device = {
 	.name           = "nop_usb_xceiv",
 	.id             = -1,
 	.dev = {
 		.dma_mask               = &nop_xceiv_dmamask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = NULL,
 	},
 };
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 30829ee920c..7ba8db5d4c4 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2260,11 +2260,11 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 		gcap &= ~0x01;
 
 	/* allow 64bit DMA address if supported by H/W */
-	if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
-		pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+	if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
 	else {
-		pci_set_dma_mask(pci, DMA_32BIT_MASK);
-		pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+		pci_set_dma_mask(pci, DMA_BIT_MASK(32));
+		pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
 	}
 
 	/* read number of streams from GCAP register instead of using
-- 
GitLab


From c863d835b7cd9a3c08a941d4ae59b8faefa31422 Mon Sep 17 00:00:00 2001
From: Bharata B Rao <bharata@linux.vnet.ibm.com>
Date: Mon, 13 Apr 2009 14:40:15 -0700
Subject: [PATCH 0146/1421] memcg: fix documentation

The description about various statistics from memory.stat is not accurate
and confusing at times.

Correct this along with a few other minor cleanups.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/cgroups/memory.txt | 55 +++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 23 deletions(-)

diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index a98a7fe7aab..1a608877b14 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -6,15 +6,14 @@ used here with the memory controller that is used in hardware.
 
 Salient features
 
-a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
+a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
+   Swap Cache memory pages.
 b. The infrastructure allows easy addition of other types of memory to control
 c. Provides *zero overhead* for non memory controller users
 d. Provides a double LRU: global memory pressure causes reclaim from the
    global LRU; a cgroup on hitting a limit, reclaims from the per
    cgroup LRU
 
-NOTE: Swap Cache (unmapped) is not accounted now.
-
 Benefits and Purpose of the memory controller
 
 The memory controller isolates the memory behaviour of a group of tasks
@@ -290,34 +289,44 @@ will be charged as a new owner of it.
   moved to the parent. If you want to avoid that, force_empty will be useful.
 
 5.2 stat file
-  memory.stat file includes following statistics (now)
-	cache			- # of pages from page-cache and shmem.
-	rss			- # of pages from anonymous memory.
-	pgpgin			- # of event of charging
-	pgpgout			- # of event of uncharging
-	active_anon		- # of pages on active lru of anon, shmem.
-	inactive_anon 		- # of pages on active lru of anon, shmem
-	active_file		- # of pages on active lru of file-cache
-	inactive_file		- # of pages on inactive lru of file cache
-	unevictable		- # of pages cannot be reclaimed.(mlocked etc)
-
-	Below is depend on CONFIG_DEBUG_VM.
-	inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
-	recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
-	recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
-	recent_scanned_anon 	- VM internal parameter. (see mm/vmscan.c)
-	recent_scanned_file 	- VM internal parameter. (see mm/vmscan.c)
-
-  Memo:
+
+memory.stat file includes following statistics
+
+cache		- # of bytes of page cache memory.
+rss		- # of bytes of anonymous and swap cache memory.
+pgpgin		- # of pages paged in (equivalent to # of charging events).
+pgpgout		- # of pages paged out (equivalent to # of uncharging events).
+active_anon	- # of bytes of anonymous and  swap cache memory on active
+		  lru list.
+inactive_anon	- # of bytes of anonymous memory and swap cache memory on
+		  inactive lru list.
+active_file	- # of bytes of file-backed memory on active lru list.
+inactive_file	- # of bytes of file-backed memory on inactive lru list.
+unevictable	- # of bytes of memory that cannot be reclaimed (mlocked etc).
+
+The following additional stats are dependent on CONFIG_DEBUG_VM.
+
+inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
+recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon	- VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file	- VM internal parameter. (see mm/vmscan.c)
+
+Memo:
 	recent_rotated means recent frequency of lru rotation.
 	recent_scanned means recent # of scans to lru.
 	showing for better debug please see the code for meanings.
 
+Note:
+	Only anonymous and swap cache memory is listed as part of 'rss' stat.
+	This should not be confused with the true 'resident set size' or the
+	amount of physical memory used by the cgroup. Per-cgroup rss
+	accounting is not done yet.
 
 5.3 swappiness
   Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
 
-  Following cgroup's swapiness can't be changed.
+  Following cgroups' swapiness can't be changed.
   - root cgroup (uses /proc/sys/vm/swappiness).
   - a cgroup which uses hierarchy and it has child cgroup.
   - a cgroup which uses hierarchy and not the root of hierarchy.
-- 
GitLab


From bbdba2737443ae7b530a453d8152f2068ca4cf56 Mon Sep 17 00:00:00 2001
From: Shen Feng <shen@cn.fujitsu.com>
Date: Mon, 13 Apr 2009 14:40:16 -0700
Subject: [PATCH 0147/1421] doc: use correct debugfs mountpoint

Use the default mountpoint of debugfs in the pktcdvd ABI.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: <balagi@justmail.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/ABI/testing/debugfs-pktcdvd | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/debugfs-pktcdvd b/Documentation/ABI/testing/debugfs-pktcdvd
index bf9c16b64c3..cf11736acb7 100644
--- a/Documentation/ABI/testing/debugfs-pktcdvd
+++ b/Documentation/ABI/testing/debugfs-pktcdvd
@@ -1,4 +1,4 @@
-What:           /debug/pktcdvd/pktcdvd[0-7]
+What:           /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
 Date:           Oct. 2006
 KernelVersion:  2.6.20
 Contact:        Thomas Maier <balagi@justmail.de>
@@ -10,10 +10,10 @@ debugfs interface
 The pktcdvd module (packet writing driver) creates
 these files in debugfs:
 
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
     info            (0444) Lots of driver statistics and infos.
 
 Example:
 -------
 
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
-- 
GitLab


From a06bba4643ae10ac6b202dade1cde38bc5e08b25 Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Mon, 13 Apr 2009 14:40:17 -0700
Subject: [PATCH 0148/1421] sgi-xpc: update SGI XP/XPC/XPNET maintainer

Dean has moved on to other work.  His responsibilities for XP/XPC/XPNET
have been handed to me.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index fbdb80937de..29d74f47ba8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4978,8 +4978,8 @@ S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-P:	Dean Nelson
-M:	dcn@sgi.com
+P:	Robin Holt
+M:	holt@sgi.com
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 
-- 
GitLab


From a374c57b0764432a80303abee3d1afd1939b5a0a Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Mon, 13 Apr 2009 14:40:18 -0700
Subject: [PATCH 0149/1421] sgi-xpc: prevent false heartbeat failures

The heartbeat timeout functionality in sgi-xpc is currently not trained to
the connection time.  If a connection is made and the code is in the last
polling window prior to doing a timeout, the next polling window will see
the heartbeat as unchanged and initiate a no-heartbeat disconnect.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-xp/xpc.h      | 100 ++++++++++-----------------
 drivers/misc/sgi-xp/xpc_main.c |   8 ++-
 drivers/misc/sgi-xp/xpc_sn2.c  |  44 ++++++++++--
 drivers/misc/sgi-xp/xpc_uv.c   | 123 ++++++++++++---------------------
 4 files changed, 123 insertions(+), 152 deletions(-)

diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 114444cfd49..da32bbe8caa 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -90,18 +90,21 @@ struct xpc_rsvd_page {
 	short max_npartitions;	/* value of XPC_MAX_PARTITIONS */
 	u8 version;
 	u8 pad1[3];		/* align to next u64 in 1st 64-byte cacheline */
+	unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
 	union {
-		unsigned long vars_pa;	/* phys address of struct xpc_vars */
-		unsigned long activate_gru_mq_desc_gpa; /* phys addr of */
-							/* activate mq's */
-							/* gru mq descriptor */
+		struct {
+			unsigned long vars_pa;	/* phys addr */
+		} sn2;
+		struct {
+			unsigned long heartbeat_gpa; /* phys addr */
+			unsigned long activate_gru_mq_desc_gpa; /* phys addr */
+		} uv;
 	} sn;
-	unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
-	u64 pad2[10];		/* align to last u64 in 2nd 64-byte cacheline */
+	u64 pad2[9];		/* align to last u64 in 2nd 64-byte cacheline */
 	u64 SAL_nasids_size;	/* SAL: size of each nasid mask in bytes */
 };
 
-#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
+#define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */
 
 /*
  * Define the structures by which XPC variables can be exported to other
@@ -182,6 +185,17 @@ struct xpc_vars_part_sn2 {
 				 (XPC_RP_MACH_NASIDS(_rp) + \
 				  xpc_nasid_mask_nlongs))
 
+
+/*
+ * The following structure describes the partition's heartbeat info which
+ * will be periodically read by other partitions to determine whether this
+ * XPC is still 'alive'.
+ */
+struct xpc_heartbeat_uv {
+	unsigned long value;
+	unsigned long offline;	/* if 0, heartbeat should be changing */
+};
+
 /*
  * Info pertinent to a GRU message queue using a watch list for irq generation.
  */
@@ -198,7 +212,7 @@ struct xpc_gru_mq_uv {
 
 /*
  * The activate_mq is used to send/receive GRU messages that affect XPC's
- * heartbeat, partition active state, and channel state. This is UV only.
+ * partition active state and channel state. This is uv only.
  */
 struct xpc_activate_mq_msghdr_uv {
 	unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */
@@ -210,33 +224,26 @@ struct xpc_activate_mq_msghdr_uv {
 
 /* activate_mq defined message types */
 #define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV		0
-#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV		1
-#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV	2
-#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV		3
 
-#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV		4
-#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV		5
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV		1
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV		2
 
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV	6
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV		7
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV	8
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV		9
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV	3
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV		4
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV	5
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV		6
 
-#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		10
-#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		11
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		7
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		8
 
 struct xpc_activate_mq_msg_uv {
 	struct xpc_activate_mq_msghdr_uv hdr;
 };
 
-struct xpc_activate_mq_msg_heartbeat_req_uv {
-	struct xpc_activate_mq_msghdr_uv hdr;
-	u64 heartbeat;
-};
-
 struct xpc_activate_mq_msg_activate_req_uv {
 	struct xpc_activate_mq_msghdr_uv hdr;
 	unsigned long rp_gpa;
+	unsigned long heartbeat_gpa;
 	unsigned long activate_gru_mq_desc_gpa;
 };
 
@@ -687,6 +694,9 @@ struct xpc_partition_sn2 {
 };
 
 struct xpc_partition_uv {
+	unsigned long heartbeat_gpa; /* phys addr of partition's heartbeat */
+	struct xpc_heartbeat_uv cached_heartbeat; /* cached copy of */
+						  /* partition's heartbeat */
 	unsigned long activate_gru_mq_desc_gpa;	/* phys addr of parititon's */
 						/* activate mq's gru mq */
 						/* descriptor */
@@ -698,14 +708,12 @@ struct xpc_partition_uv {
 	u8 remote_act_state;	/* remote partition's act_state */
 	u8 act_state_req;	/* act_state request from remote partition */
 	enum xp_retval reason;	/* reason for deactivate act_state request */
-	u64 heartbeat;		/* incremented by remote partition */
 };
 
 /* struct xpc_partition_uv flags */
 
-#define XPC_P_HEARTBEAT_OFFLINE_UV		0x00000001
+#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV	0x00000001
 #define XPC_P_ENGAGED_UV			0x00000002
-#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV	0x00000004
 
 /* struct xpc_partition_uv act_state change requests */
 
@@ -807,7 +815,6 @@ extern int xpc_disengage_timedout;
 extern int xpc_activate_IRQ_rcvd;
 extern spinlock_t xpc_activate_IRQ_rcvd_lock;
 extern wait_queue_head_t xpc_activate_IRQ_wq;
-extern void *xpc_heartbeating_to_mask;
 extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
@@ -825,6 +832,9 @@ extern void (*xpc_increment_heartbeat) (void);
 extern void (*xpc_offline_heartbeat) (void);
 extern void (*xpc_online_heartbeat) (void);
 extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
+extern void (*xpc_allow_hb) (short);
+extern void (*xpc_disallow_hb) (short);
+extern void (*xpc_disallow_all_hbs) (void);
 extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
 extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
 extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
@@ -909,40 +919,6 @@ extern void xpc_disconnect_channel(const int, struct xpc_channel *,
 extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
 extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
 
-static inline int
-xpc_hb_allowed(short partid, void *heartbeating_to_mask)
-{
-	return test_bit(partid, heartbeating_to_mask);
-}
-
-static inline int
-xpc_any_hbs_allowed(void)
-{
-	DBUG_ON(xpc_heartbeating_to_mask == NULL);
-	return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
-static inline void
-xpc_allow_hb(short partid)
-{
-	DBUG_ON(xpc_heartbeating_to_mask == NULL);
-	set_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid)
-{
-	DBUG_ON(xpc_heartbeating_to_mask == NULL);
-	clear_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_all_hbs(void)
-{
-	DBUG_ON(xpc_heartbeating_to_mask == NULL);
-	bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
 static inline void
 xpc_wakeup_channel_mgr(struct xpc_partition *part)
 {
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 1ab9fda87fa..34b084cd63d 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 /*
@@ -150,7 +150,6 @@ DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
 static struct timer_list xpc_hb_timer;
-void *xpc_heartbeating_to_mask;
 
 /* notification that the xpc_hb_checker thread has exited */
 static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -176,6 +175,10 @@ enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
 						  unsigned long *rp_pa,
 						  size_t *len);
 int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
+
+void (*xpc_allow_hb) (short partid);
+void (*xpc_disallow_hb) (short partid);
+void (*xpc_disallow_all_hbs) (void);
 void (*xpc_heartbeat_init) (void);
 void (*xpc_heartbeat_exit) (void);
 void (*xpc_increment_heartbeat) (void);
@@ -1087,7 +1090,6 @@ xpc_do_exit(enum xp_retval reason)
 	} while (1);
 
 	DBUG_ON(xpc_any_partition_engaged());
-	DBUG_ON(xpc_any_hbs_allowed() != 0);
 
 	xpc_teardown_rsvd_page();
 
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index eaaa964942d..43ad2968daf 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 /*
@@ -629,7 +629,7 @@ xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
 
 	xpc_vars_sn2 = XPC_RP_VARS(rp);
 
-	rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+	rp->sn.sn2.vars_pa = xp_pa(xpc_vars_sn2);
 
 	/* vars_part array follows immediately after vars */
 	xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
@@ -693,6 +693,33 @@ xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
 	return 0;
 }
 
+static int
+xpc_hb_allowed_sn2(short partid, void *heartbeating_to_mask)
+{
+	return test_bit(partid, heartbeating_to_mask);
+}
+
+static void
+xpc_allow_hb_sn2(short partid)
+{
+	DBUG_ON(xpc_vars_sn2 == NULL);
+	set_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_hb_sn2(short partid)
+{
+	DBUG_ON(xpc_vars_sn2 == NULL);
+	clear_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_all_hbs_sn2(void)
+{
+	DBUG_ON(xpc_vars_sn2 == NULL);
+	bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, xp_max_npartitions);
+}
+
 static void
 xpc_increment_heartbeat_sn2(void)
 {
@@ -719,7 +746,6 @@ xpc_heartbeat_init_sn2(void)
 	DBUG_ON(xpc_vars_sn2 == NULL);
 
 	bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
-	xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
 	xpc_online_heartbeat_sn2();
 }
 
@@ -751,9 +777,9 @@ xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
 		remote_vars->heartbeating_to_mask[0]);
 
 	if ((remote_vars->heartbeat == part->last_heartbeat &&
-	    remote_vars->heartbeat_offline == 0) ||
-	    !xpc_hb_allowed(sn_partition_id,
-			    &remote_vars->heartbeating_to_mask)) {
+	    !remote_vars->heartbeat_offline) ||
+	    !xpc_hb_allowed_sn2(sn_partition_id,
+				remote_vars->heartbeating_to_mask)) {
 		ret = xpNoHeartbeat;
 	} else {
 		part->last_heartbeat = remote_vars->heartbeat;
@@ -972,7 +998,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid)
 		return;
 	}
 
-	remote_vars_pa = remote_rp->sn.vars_pa;
+	remote_vars_pa = remote_rp->sn.sn2.vars_pa;
 	remote_rp_version = remote_rp->version;
 	remote_rp_ts_jiffies = remote_rp->ts_jiffies;
 
@@ -2325,6 +2351,10 @@ xpc_init_sn2(void)
 	xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2;
 	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
 	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
+
+	xpc_allow_hb = xpc_allow_hb_sn2;
+	xpc_disallow_hb = xpc_disallow_hb_sn2;
+	xpc_disallow_all_hbs = xpc_disallow_all_hbs_sn2;
 	xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
 	xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
 	xpc_online_heartbeat = xpc_online_heartbeat_sn2;
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index f7fff4727ed..97f7cb21a0a 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -46,8 +46,7 @@ struct uv_IO_APIC_route_entry {
 };
 #endif
 
-static atomic64_t xpc_heartbeat_uv;
-static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+static struct xpc_heartbeat_uv *xpc_heartbeat_uv;
 
 #define XPC_ACTIVATE_MSG_SIZE_UV	(1 * GRU_CACHE_LINE_BYTES)
 #define XPC_ACTIVATE_MQ_SIZE_UV		(4 * XP_MAX_NPARTITIONS_UV * \
@@ -423,41 +422,6 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
 		/* syncing of remote_act_state was just done above */
 		break;
 
-	case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
-		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
-		msg = container_of(msg_hdr,
-				   struct xpc_activate_mq_msg_heartbeat_req_uv,
-				   hdr);
-		part_uv->heartbeat = msg->heartbeat;
-		break;
-	}
-	case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
-		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
-		msg = container_of(msg_hdr,
-				   struct xpc_activate_mq_msg_heartbeat_req_uv,
-				   hdr);
-		part_uv->heartbeat = msg->heartbeat;
-
-		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
-		part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
-		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
-		break;
-	}
-	case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
-		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
-		msg = container_of(msg_hdr,
-				   struct xpc_activate_mq_msg_heartbeat_req_uv,
-				   hdr);
-		part_uv->heartbeat = msg->heartbeat;
-
-		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
-		part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
-		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
-		break;
-	}
 	case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
 		struct xpc_activate_mq_msg_activate_req_uv *msg;
 
@@ -475,6 +439,7 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
 		part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
 		part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
 		part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+		part_uv->heartbeat_gpa = msg->heartbeat_gpa;
 
 		if (msg->activate_gru_mq_desc_gpa !=
 		    part_uv->activate_gru_mq_desc_gpa) {
@@ -759,7 +724,7 @@ xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req)
 
 	/*
 	 * !!! Make our side think that the remote partition sent an activate
-	 * !!! message our way by doing what the activate IRQ handler would
+	 * !!! mq message our way by doing what the activate IRQ handler would
 	 * !!! do had one really been sent.
 	 */
 
@@ -808,88 +773,80 @@ xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
 static int
 xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
 {
-	rp->sn.activate_gru_mq_desc_gpa =
+	xpc_heartbeat_uv =
+	    &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat;
+	rp->sn.uv.heartbeat_gpa = uv_gpa(xpc_heartbeat_uv);
+	rp->sn.uv.activate_gru_mq_desc_gpa =
 	    uv_gpa(xpc_activate_mq_uv->gru_mq_desc);
 	return 0;
 }
 
 static void
-xpc_send_heartbeat_uv(int msg_type)
+xpc_allow_hb_uv(short partid)
 {
-	short partid;
-	struct xpc_partition *part;
-	struct xpc_activate_mq_msg_heartbeat_req_uv msg;
-
-	/*
-	 * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
-	 * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
-	 * !!! seconds. This is an increase in numalink traffic.
-	 * ??? Is this good?
-	 */
-
-	msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
-
-	partid = find_first_bit(xpc_heartbeating_to_mask_uv,
-				XP_MAX_NPARTITIONS_UV);
-
-	while (partid < XP_MAX_NPARTITIONS_UV) {
-		part = &xpc_partitions[partid];
+}
 
-		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
-					      msg_type);
+static void
+xpc_disallow_hb_uv(short partid)
+{
+}
 
-		partid = find_next_bit(xpc_heartbeating_to_mask_uv,
-				       XP_MAX_NPARTITIONS_UV, partid + 1);
-	}
+static void
+xpc_disallow_all_hbs_uv(void)
+{
 }
 
 static void
 xpc_increment_heartbeat_uv(void)
 {
-	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+	xpc_heartbeat_uv->value++;
 }
 
 static void
 xpc_offline_heartbeat_uv(void)
 {
-	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+	xpc_increment_heartbeat_uv();
+	xpc_heartbeat_uv->offline = 1;
 }
 
 static void
 xpc_online_heartbeat_uv(void)
 {
-	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+	xpc_increment_heartbeat_uv();
+	xpc_heartbeat_uv->offline = 0;
 }
 
 static void
 xpc_heartbeat_init_uv(void)
 {
-	atomic64_set(&xpc_heartbeat_uv, 0);
-	bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
-	xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+	xpc_heartbeat_uv->value = 1;
+	xpc_heartbeat_uv->offline = 0;
 }
 
 static void
 xpc_heartbeat_exit_uv(void)
 {
-	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+	xpc_offline_heartbeat_uv();
 }
 
 static enum xp_retval
 xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
 {
 	struct xpc_partition_uv *part_uv = &part->sn.uv;
-	enum xp_retval ret = xpNoHeartbeat;
+	enum xp_retval ret;
 
-	if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
-	    part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+	ret = xp_remote_memcpy(uv_gpa(&part_uv->cached_heartbeat),
+			       part_uv->heartbeat_gpa,
+			       sizeof(struct xpc_heartbeat_uv));
+	if (ret != xpSuccess)
+		return ret;
 
-		if (part_uv->heartbeat != part->last_heartbeat ||
-		    (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+	if (part_uv->cached_heartbeat.value == part->last_heartbeat &&
+	    !part_uv->cached_heartbeat.offline) {
 
-			part->last_heartbeat = part_uv->heartbeat;
-			ret = xpSuccess;
-		}
+		ret = xpNoHeartbeat;
+	} else {
+		part->last_heartbeat = part_uv->cached_heartbeat.value;
 	}
 	return ret;
 }
@@ -904,8 +861,9 @@ xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
 
 	part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
 	part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+	part->sn.uv.heartbeat_gpa = remote_rp->sn.uv.heartbeat_gpa;
 	part->sn.uv.activate_gru_mq_desc_gpa =
-	    remote_rp->sn.activate_gru_mq_desc_gpa;
+	    remote_rp->sn.uv.activate_gru_mq_desc_gpa;
 
 	/*
 	 * ??? Is it a good idea to make this conditional on what is
@@ -913,8 +871,9 @@ xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
 	 */
 	if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
 		msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+		msg.heartbeat_gpa = xpc_rsvd_page->sn.uv.heartbeat_gpa;
 		msg.activate_gru_mq_desc_gpa =
-		    xpc_rsvd_page->sn.activate_gru_mq_desc_gpa;
+		    xpc_rsvd_page->sn.uv.activate_gru_mq_desc_gpa;
 		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
 					   XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
 	}
@@ -1677,6 +1636,10 @@ xpc_init_uv(void)
 	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
 	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
 	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
+
+	xpc_allow_hb = xpc_allow_hb_uv;
+	xpc_disallow_hb = xpc_disallow_hb_uv;
+	xpc_disallow_all_hbs = xpc_disallow_all_hbs_uv;
 	xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
 	xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
 	xpc_online_heartbeat = xpc_online_heartbeat_uv;
-- 
GitLab


From efdd06ed181a88a11e612238c1ac04668e665395 Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Mon, 13 Apr 2009 14:40:19 -0700
Subject: [PATCH 0150/1421] sgi-xpc: implement opencomplete messaging

sgi-xpc has a window of failure where an open message can be sent and a
subsequent data message can get lost.  We have added a new message
(opencomplete) which closes that window.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-xp/xpc.h         | 56 +++++++++++-------
 drivers/misc/sgi-xp/xpc_channel.c | 97 ++++++++++++++++++-------------
 drivers/misc/sgi-xp/xpc_main.c    |  2 +
 drivers/misc/sgi-xp/xpc_sn2.c     |  8 +++
 drivers/misc/sgi-xp/xpc_uv.c      | 22 +++++++
 5 files changed, 124 insertions(+), 61 deletions(-)

diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index da32bbe8caa..a5404767478 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -232,9 +232,10 @@ struct xpc_activate_mq_msghdr_uv {
 #define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV		4
 #define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV	5
 #define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV		6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV	7
 
-#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		7
-#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		8
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		8
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		9
 
 struct xpc_activate_mq_msg_uv {
 	struct xpc_activate_mq_msghdr_uv hdr;
@@ -278,6 +279,11 @@ struct xpc_activate_mq_msg_chctl_openreply_uv {
 	unsigned long notify_gru_mq_desc_gpa;
 };
 
+struct xpc_activate_mq_msg_chctl_opencomplete_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+};
+
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
  * allow for a single 64-bit argument. The following macros can be used to
@@ -583,30 +589,32 @@ struct xpc_channel {
 
 #define	XPC_C_WASCONNECTED	0x00000001	/* channel was connected */
 
-#define	XPC_C_ROPENREPLY	0x00000002	/* remote open channel reply */
-#define	XPC_C_OPENREPLY		0x00000004	/* local open channel reply */
-#define	XPC_C_ROPENREQUEST	0x00000008     /* remote open channel request */
-#define	XPC_C_OPENREQUEST	0x00000010	/* local open channel request */
+#define XPC_C_ROPENCOMPLETE	0x00000002    /* remote open channel complete */
+#define XPC_C_OPENCOMPLETE	0x00000004     /* local open channel complete */
+#define	XPC_C_ROPENREPLY	0x00000008	/* remote open channel reply */
+#define	XPC_C_OPENREPLY		0x00000010	/* local open channel reply */
+#define	XPC_C_ROPENREQUEST	0x00000020     /* remote open channel request */
+#define	XPC_C_OPENREQUEST	0x00000040	/* local open channel request */
 
-#define	XPC_C_SETUP		0x00000020 /* channel's msgqueues are alloc'd */
-#define	XPC_C_CONNECTEDCALLOUT	0x00000040     /* connected callout initiated */
+#define	XPC_C_SETUP		0x00000080 /* channel's msgqueues are alloc'd */
+#define	XPC_C_CONNECTEDCALLOUT	0x00000100     /* connected callout initiated */
 #define	XPC_C_CONNECTEDCALLOUT_MADE \
-				0x00000080     /* connected callout completed */
-#define	XPC_C_CONNECTED		0x00000100	/* local channel is connected */
-#define	XPC_C_CONNECTING	0x00000200	/* channel is being connected */
+				0x00000200     /* connected callout completed */
+#define	XPC_C_CONNECTED		0x00000400	/* local channel is connected */
+#define	XPC_C_CONNECTING	0x00000800	/* channel is being connected */
 
-#define	XPC_C_RCLOSEREPLY	0x00000400	/* remote close channel reply */
-#define	XPC_C_CLOSEREPLY	0x00000800	/* local close channel reply */
-#define	XPC_C_RCLOSEREQUEST	0x00001000    /* remote close channel request */
-#define	XPC_C_CLOSEREQUEST	0x00002000     /* local close channel request */
+#define	XPC_C_RCLOSEREPLY	0x00001000	/* remote close channel reply */
+#define	XPC_C_CLOSEREPLY	0x00002000	/* local close channel reply */
+#define	XPC_C_RCLOSEREQUEST	0x00004000    /* remote close channel request */
+#define	XPC_C_CLOSEREQUEST	0x00008000     /* local close channel request */
 
-#define	XPC_C_DISCONNECTED	0x00004000	/* channel is disconnected */
-#define	XPC_C_DISCONNECTING	0x00008000   /* channel is being disconnected */
+#define	XPC_C_DISCONNECTED	0x00010000	/* channel is disconnected */
+#define	XPC_C_DISCONNECTING	0x00020000   /* channel is being disconnected */
 #define	XPC_C_DISCONNECTINGCALLOUT \
-				0x00010000 /* disconnecting callout initiated */
+				0x00040000 /* disconnecting callout initiated */
 #define	XPC_C_DISCONNECTINGCALLOUT_MADE \
-				0x00020000 /* disconnecting callout completed */
-#define	XPC_C_WDISCONNECT	0x00040000  /* waiting for channel disconnect */
+				0x00080000 /* disconnecting callout completed */
+#define	XPC_C_WDISCONNECT	0x00100000  /* waiting for channel disconnect */
 
 /*
  * The channel control flags (chctl) union consists of a 64-bit variable which
@@ -625,11 +633,13 @@ union xpc_channel_ctl_flags {
 #define	XPC_CHCTL_CLOSEREPLY	0x02
 #define	XPC_CHCTL_OPENREQUEST	0x04
 #define	XPC_CHCTL_OPENREPLY	0x08
-#define	XPC_CHCTL_MSGREQUEST	0x10
+#define XPC_CHCTL_OPENCOMPLETE	0x10
+#define	XPC_CHCTL_MSGREQUEST	0x20
 
 #define XPC_OPENCLOSE_CHCTL_FLAGS \
 			(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
-			 XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+			 XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | \
+			 XPC_CHCTL_OPENCOMPLETE)
 #define XPC_MSG_CHCTL_FLAGS	XPC_CHCTL_MSGREQUEST
 
 static inline int
@@ -866,6 +876,8 @@ extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
 extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
 					   unsigned long *);
 extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+extern void (*xpc_send_chctl_opencomplete) (struct xpc_channel *,
+					    unsigned long *);
 
 extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
 						      unsigned long);
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 99a2534c38a..2eb3abff0e3 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 /*
@@ -44,10 +44,10 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 		if (ret != xpSuccess)
 			XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
+		else
+			ch->flags |= XPC_C_SETUP;
 
-		ch->flags |= XPC_C_SETUP;
-
-		if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
+		if (ch->flags & XPC_C_DISCONNECTING)
 			return;
 	}
 
@@ -59,14 +59,18 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 	if (!(ch->flags & XPC_C_ROPENREPLY))
 		return;
 
-	ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP);	/* clear all else */
+	if (!(ch->flags & XPC_C_OPENCOMPLETE)) {
+		ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED);
+		xpc_send_chctl_opencomplete(ch, irq_flags);
+	}
+
+	if (!(ch->flags & XPC_C_ROPENCOMPLETE))
+		return;
 
 	dev_info(xpc_chan, "channel %d to partition %d connected\n",
 		 ch->number, ch->partid);
 
-	spin_unlock_irqrestore(&ch->lock, *irq_flags);
-	xpc_create_kthreads(ch, 1, 0);
-	spin_lock_irqsave(&ch->lock, *irq_flags);
+	ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP);	/* clear all else */
 }
 
 /*
@@ -184,6 +188,7 @@ xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number,
 	struct xpc_channel *ch = &part->channels[ch_number];
 	enum xp_retval reason;
 	enum xp_retval ret;
+	int create_kthread = 0;
 
 	spin_lock_irqsave(&ch->lock, irq_flags);
 
@@ -196,8 +201,7 @@ again:
 		 * has had a chance to see that the channel is disconnected.
 		 */
 		ch->delayed_chctl_flags |= chctl_flags;
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return;
+		goto out;
 	}
 
 	if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
@@ -239,8 +243,7 @@ again:
 					    XPC_CHCTL_CLOSEREQUEST;
 					spin_unlock(&part->chctl_lock);
 				}
-				spin_unlock_irqrestore(&ch->lock, irq_flags);
-				return;
+				goto out;
 			}
 
 			XPC_SET_REASON(ch, 0, 0);
@@ -250,7 +253,8 @@ again:
 			ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
 		}
 
-		chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
+		chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY |
+		    XPC_CHCTL_OPENCOMPLETE);
 
 		/*
 		 * The meaningful CLOSEREQUEST connection state fields are:
@@ -269,8 +273,7 @@ again:
 			XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
 
 			DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 
 		xpc_process_disconnect(ch, &irq_flags);
@@ -283,8 +286,7 @@ again:
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
 			DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 
 		DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
@@ -299,8 +301,7 @@ again:
 				    XPC_CHCTL_CLOSEREPLY;
 				spin_unlock(&part->chctl_lock);
 			}
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 
 		ch->flags |= XPC_C_RCLOSEREPLY;
@@ -320,14 +321,12 @@ again:
 
 		if (part->act_state == XPC_P_AS_DEACTIVATING ||
 		    (ch->flags & XPC_C_ROPENREQUEST)) {
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
 			ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 		DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED |
 				       XPC_C_OPENREQUEST)));
@@ -341,8 +340,7 @@ again:
 		 */
 		if (args->entry_size == 0 || args->local_nentries == 0) {
 			/* assume OPENREQUEST was delayed by mistake */
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 
 		ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
@@ -352,8 +350,7 @@ again:
 			if (args->entry_size != ch->entry_size) {
 				XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
 						       &irq_flags);
-				spin_unlock_irqrestore(&ch->lock, irq_flags);
-				return;
+				goto out;
 			}
 		} else {
 			ch->entry_size = args->entry_size;
@@ -375,15 +372,13 @@ again:
 			args->local_msgqueue_pa, args->local_nentries,
 			args->remote_nentries, ch->partid, ch->number);
 
-		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
-		}
+		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+			goto out;
+
 		if (!(ch->flags & XPC_C_OPENREQUEST)) {
 			XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
 					       &irq_flags);
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 
 		DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
@@ -403,8 +398,7 @@ again:
 		ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
 		if (ret != xpSuccess) {
 			XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags);
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return;
+			goto out;
 		}
 		ch->flags |= XPC_C_ROPENREPLY;
 
@@ -430,7 +424,36 @@ again:
 		xpc_process_connect(ch, &irq_flags);
 	}
 
+	if (chctl_flags & XPC_CHCTL_OPENCOMPLETE) {
+
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENCOMPLETE received from "
+			"partid=%d, channel=%d\n", ch->partid, ch->number);
+
+		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+			goto out;
+
+		if (!(ch->flags & XPC_C_OPENREQUEST) ||
+		    !(ch->flags & XPC_C_OPENREPLY)) {
+			XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
+					       &irq_flags);
+			goto out;
+		}
+
+		DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
+		DBUG_ON(!(ch->flags & XPC_C_ROPENREPLY));
+		DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
+
+		ch->flags |= XPC_C_ROPENCOMPLETE;
+
+		xpc_process_connect(ch, &irq_flags);
+		create_kthread = 1;
+	}
+
+out:
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+	if (create_kthread)
+		xpc_create_kthreads(ch, 1, 0);
 }
 
 /*
@@ -564,10 +587,6 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part)
 			if (!(ch_flags & XPC_C_OPENREQUEST)) {
 				DBUG_ON(ch_flags & XPC_C_SETUP);
 				(void)xpc_connect_channel(ch);
-			} else {
-				spin_lock_irqsave(&ch->lock, irq_flags);
-				xpc_process_connect(ch, &irq_flags);
-				spin_unlock_irqrestore(&ch->lock, irq_flags);
 			}
 			continue;
 		}
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 34b084cd63d..2bb070e1722 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -220,6 +220,8 @@ void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
 				    unsigned long *irq_flags);
 void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
 				  unsigned long *irq_flags);
+void (*xpc_send_chctl_opencomplete) (struct xpc_channel *ch,
+				  unsigned long *irq_flags);
 
 enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
 					       unsigned long msgqueue_pa);
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 43ad2968daf..09bc1989f21 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -430,6 +430,13 @@ xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
 	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
 }
 
+static void
+xpc_send_chctl_opencomplete_sn2(struct xpc_channel *ch,
+				unsigned long *irq_flags)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENCOMPLETE, irq_flags);
+}
+
 static void
 xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
 {
@@ -2380,6 +2387,7 @@ xpc_init_sn2(void)
 	xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
 	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
 	xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
+	xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2;
 
 	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
 
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 97f7cb21a0a..1e475b4c088 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -534,6 +534,17 @@ xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
 		xpc_wakeup_channel_mgr(part);
 		break;
 	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV: {
+		struct xpc_activate_mq_msg_chctl_opencomplete_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				xpc_activate_mq_msg_chctl_opencomplete_uv, hdr);
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENCOMPLETE;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+	}
 	case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
 		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
 		part_uv->flags |= XPC_P_ENGAGED_UV;
@@ -1201,6 +1212,16 @@ xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
 				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
 }
 
+static void
+xpc_send_chctl_opencomplete_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_opencomplete_uv msg;
+
+	msg.ch_number = ch->number;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV);
+}
+
 static void
 xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
 {
@@ -1665,6 +1686,7 @@ xpc_init_uv(void)
 	xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
 	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
 	xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
+	xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv;
 
 	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
 
-- 
GitLab


From a7665b0a380585fbd70a2275f3120c6086e0c92d Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Mon, 13 Apr 2009 14:40:19 -0700
Subject: [PATCH 0151/1421] sgi-xpc: clean up numerous globals

Introduce xpc_arch_ops and eliminate numerous individual global definitions.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-xp/xpc.h           | 112 ++++++++++++------------
 drivers/misc/sgi-xp/xpc_channel.c   |  43 ++++-----
 drivers/misc/sgi-xp/xpc_main.c      | 130 ++++++++--------------------
 drivers/misc/sgi-xp/xpc_partition.c |  20 +++--
 drivers/misc/sgi-xp/xpc_sn2.c       | 122 +++++++++++++-------------
 drivers/misc/sgi-xp/xpc_uv.c        | 122 +++++++++++++-------------
 6 files changed, 254 insertions(+), 295 deletions(-)

diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index a5404767478..b94d5f76770 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -780,6 +780,62 @@ struct xpc_partition {
 
 } ____cacheline_aligned;
 
+struct xpc_arch_operations {
+	int (*setup_partitions) (void);
+	void (*teardown_partitions) (void);
+	void (*process_activate_IRQ_rcvd) (void);
+	enum xp_retval (*get_partition_rsvd_page_pa)
+		(void *, u64 *, unsigned long *, size_t *);
+	int (*setup_rsvd_page) (struct xpc_rsvd_page *);
+
+	void (*allow_hb) (short);
+	void (*disallow_hb) (short);
+	void (*disallow_all_hbs) (void);
+	void (*increment_heartbeat) (void);
+	void (*offline_heartbeat) (void);
+	void (*online_heartbeat) (void);
+	void (*heartbeat_init) (void);
+	void (*heartbeat_exit) (void);
+	enum xp_retval (*get_remote_heartbeat) (struct xpc_partition *);
+
+	void (*request_partition_activation) (struct xpc_rsvd_page *,
+						 unsigned long, int);
+	void (*request_partition_reactivation) (struct xpc_partition *);
+	void (*request_partition_deactivation) (struct xpc_partition *);
+	void (*cancel_partition_deactivation_request) (struct xpc_partition *);
+	enum xp_retval (*setup_ch_structures) (struct xpc_partition *);
+	void (*teardown_ch_structures) (struct xpc_partition *);
+
+	enum xp_retval (*make_first_contact) (struct xpc_partition *);
+
+	u64 (*get_chctl_all_flags) (struct xpc_partition *);
+	void (*send_chctl_closerequest) (struct xpc_channel *, unsigned long *);
+	void (*send_chctl_closereply) (struct xpc_channel *, unsigned long *);
+	void (*send_chctl_openrequest) (struct xpc_channel *, unsigned long *);
+	void (*send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+	void (*send_chctl_opencomplete) (struct xpc_channel *, unsigned long *);
+	void (*process_msg_chctl_flags) (struct xpc_partition *, int);
+
+	enum xp_retval (*save_remote_msgqueue_pa) (struct xpc_channel *,
+						      unsigned long);
+
+	enum xp_retval (*setup_msg_structures) (struct xpc_channel *);
+	void (*teardown_msg_structures) (struct xpc_channel *);
+
+	void (*indicate_partition_engaged) (struct xpc_partition *);
+	void (*indicate_partition_disengaged) (struct xpc_partition *);
+	void (*assume_partition_disengaged) (short);
+	int (*partition_engaged) (short);
+	int (*any_partition_engaged) (void);
+
+	int (*n_of_deliverable_payloads) (struct xpc_channel *);
+	enum xp_retval (*send_payload) (struct xpc_channel *, u32, void *,
+					   u16, u8, xpc_notify_func, void *);
+	void *(*get_deliverable_payload) (struct xpc_channel *);
+	void (*received_payload) (struct xpc_channel *, void *);
+	void (*notify_senders_of_disconnect) (struct xpc_channel *);
+};
+
 /* struct xpc_partition act_state values (for XPC HB) */
 
 #define	XPC_P_AS_INACTIVE	0x00	/* partition is not active */
@@ -820,6 +876,7 @@ extern struct xpc_registration xpc_registrations[];
 /* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
+extern struct xpc_arch_operations xpc_arch_ops;
 extern int xpc_disengage_timelimit;
 extern int xpc_disengage_timedout;
 extern int xpc_activate_IRQ_rcvd;
@@ -830,61 +887,6 @@ extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int, int);
 extern void xpc_disconnect_wait(int);
-extern int (*xpc_setup_partitions_sn) (void);
-extern void (*xpc_teardown_partitions_sn) (void);
-extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
-							 unsigned long *,
-							 size_t *);
-extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
-extern void (*xpc_heartbeat_init) (void);
-extern void (*xpc_heartbeat_exit) (void);
-extern void (*xpc_increment_heartbeat) (void);
-extern void (*xpc_offline_heartbeat) (void);
-extern void (*xpc_online_heartbeat) (void);
-extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
-extern void (*xpc_allow_hb) (short);
-extern void (*xpc_disallow_hb) (short);
-extern void (*xpc_disallow_all_hbs) (void);
-extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
-extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
-extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
-extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
-extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
-extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
-extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
-extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
-extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
-						 unsigned long, int);
-extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
-extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
-extern void (*xpc_cancel_partition_deactivation_request) (
-							struct xpc_partition *);
-extern void (*xpc_process_activate_IRQ_rcvd) (void);
-extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
-extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
-
-extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
-extern int (*xpc_partition_engaged) (short);
-extern int (*xpc_any_partition_engaged) (void);
-extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
-extern void (*xpc_assume_partition_disengaged) (short);
-
-extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
-					    unsigned long *);
-extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
-					  unsigned long *);
-extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
-					   unsigned long *);
-extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
-extern void (*xpc_send_chctl_opencomplete) (struct xpc_channel *,
-					    unsigned long *);
-
-extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
-						      unsigned long);
-
-extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
-					   u16, u8, xpc_notify_func, void *);
-extern void (*xpc_received_payload) (struct xpc_channel *, void *);
 
 /* found in xpc_sn2.c */
 extern int xpc_init_sn2(void);
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 2eb3abff0e3..652593fc486 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -39,7 +39,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (!(ch->flags & XPC_C_SETUP)) {
 		spin_unlock_irqrestore(&ch->lock, *irq_flags);
-		ret = xpc_setup_msg_structures(ch);
+		ret = xpc_arch_ops.setup_msg_structures(ch);
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 
 		if (ret != xpSuccess)
@@ -53,7 +53,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (!(ch->flags & XPC_C_OPENREPLY)) {
 		ch->flags |= XPC_C_OPENREPLY;
-		xpc_send_chctl_openreply(ch, irq_flags);
+		xpc_arch_ops.send_chctl_openreply(ch, irq_flags);
 	}
 
 	if (!(ch->flags & XPC_C_ROPENREPLY))
@@ -61,7 +61,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (!(ch->flags & XPC_C_OPENCOMPLETE)) {
 		ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED);
-		xpc_send_chctl_opencomplete(ch, irq_flags);
+		xpc_arch_ops.send_chctl_opencomplete(ch, irq_flags);
 	}
 
 	if (!(ch->flags & XPC_C_ROPENCOMPLETE))
@@ -100,7 +100,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		/* can't proceed until the other side disengages from us */
-		if (xpc_partition_engaged(ch->partid))
+		if (xpc_arch_ops.partition_engaged(ch->partid))
 			return;
 
 	} else {
@@ -112,7 +112,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 		if (!(ch->flags & XPC_C_CLOSEREPLY)) {
 			ch->flags |= XPC_C_CLOSEREPLY;
-			xpc_send_chctl_closereply(ch, irq_flags);
+			xpc_arch_ops.send_chctl_closereply(ch, irq_flags);
 		}
 
 		if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -122,7 +122,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	/* wake those waiting for notify completion */
 	if (atomic_read(&ch->n_to_notify) > 0) {
 		/* we do callout while holding ch->lock, callout can't block */
-		xpc_notify_senders_of_disconnect(ch);
+		xpc_arch_ops.notify_senders_of_disconnect(ch);
 	}
 
 	/* both sides are disconnected now */
@@ -136,7 +136,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
 
 	/* it's now safe to free the channel's message queues */
-	xpc_teardown_msg_structures(ch);
+	xpc_arch_ops.teardown_msg_structures(ch);
 
 	ch->func = NULL;
 	ch->key = NULL;
@@ -148,8 +148,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	/*
 	 * Mark the channel disconnected and clear all other flags, including
-	 * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
-	 * not including XPC_C_WDISCONNECT (if it was set).
+	 * XPC_C_SETUP (because of call to
+	 * xpc_arch_ops.teardown_msg_structures()) but not including
+	 * XPC_C_WDISCONNECT (if it was set).
 	 */
 	ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
@@ -395,7 +396,8 @@ again:
 		DBUG_ON(args->local_nentries == 0);
 		DBUG_ON(args->remote_nentries == 0);
 
-		ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
+		ret = xpc_arch_ops.save_remote_msgqueue_pa(ch,
+						      args->local_msgqueue_pa);
 		if (ret != xpSuccess) {
 			XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags);
 			goto out;
@@ -531,7 +533,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	/* initiate the connection */
 
 	ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
-	xpc_send_chctl_openrequest(ch, &irq_flags);
+	xpc_arch_ops.send_chctl_openrequest(ch, &irq_flags);
 
 	xpc_process_connect(ch, &irq_flags);
 
@@ -549,7 +551,7 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part)
 	int ch_number;
 	u32 ch_flags;
 
-	chctl.all_flags = xpc_get_chctl_all_flags(part);
+	chctl.all_flags = xpc_arch_ops.get_chctl_all_flags(part);
 
 	/*
 	 * Initiate channel connections for registered channels.
@@ -598,7 +600,7 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part)
 		 */
 
 		if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
-			xpc_process_msg_chctl_flags(part, ch_number);
+			xpc_arch_ops.process_msg_chctl_flags(part, ch_number);
 	}
 }
 
@@ -774,7 +776,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 		       XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
 		       XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-	xpc_send_chctl_closerequest(ch, irq_flags);
+	xpc_arch_ops.send_chctl_closerequest(ch, irq_flags);
 
 	if (channel_was_connected)
 		ch->flags |= XPC_C_WASCONNECTED;
@@ -881,8 +883,8 @@ xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload,
 	DBUG_ON(payload == NULL);
 
 	if (xpc_part_ref(part)) {
-		ret = xpc_send_payload(&part->channels[ch_number], flags,
-				       payload, payload_size, 0, NULL, NULL);
+		ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+				  flags, payload, payload_size, 0, NULL, NULL);
 		xpc_part_deref(part);
 	}
 
@@ -933,9 +935,8 @@ xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload,
 	DBUG_ON(func == NULL);
 
 	if (xpc_part_ref(part)) {
-		ret = xpc_send_payload(&part->channels[ch_number], flags,
-				       payload, payload_size, XPC_N_CALL, func,
-				       key);
+		ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+			  flags, payload, payload_size, XPC_N_CALL, func, key);
 		xpc_part_deref(part);
 	}
 	return ret;
@@ -949,7 +950,7 @@ xpc_deliver_payload(struct xpc_channel *ch)
 {
 	void *payload;
 
-	payload = xpc_get_deliverable_payload(ch);
+	payload = xpc_arch_ops.get_deliverable_payload(ch);
 	if (payload != NULL) {
 
 		/*
@@ -1003,7 +1004,7 @@ xpc_initiate_received(short partid, int ch_number, void *payload)
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
 
 	ch = &part->channels[ch_number];
-	xpc_received_payload(ch, payload);
+	xpc_arch_ops.received_payload(ch, payload);
 
 	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload()  */
 	xpc_msgqueue_deref(ch);
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 2bb070e1722..fd3688a3e23 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -169,68 +169,7 @@ static struct notifier_block xpc_die_notifier = {
 	.notifier_call = xpc_system_die,
 };
 
-int (*xpc_setup_partitions_sn) (void);
-void (*xpc_teardown_partitions_sn) (void);
-enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
-						  unsigned long *rp_pa,
-						  size_t *len);
-int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
-
-void (*xpc_allow_hb) (short partid);
-void (*xpc_disallow_hb) (short partid);
-void (*xpc_disallow_all_hbs) (void);
-void (*xpc_heartbeat_init) (void);
-void (*xpc_heartbeat_exit) (void);
-void (*xpc_increment_heartbeat) (void);
-void (*xpc_offline_heartbeat) (void);
-void (*xpc_online_heartbeat) (void);
-enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
-
-enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
-void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
-u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
-enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
-void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
-void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
-int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
-void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
-
-void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
-					  unsigned long remote_rp_pa,
-					  int nasid);
-void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
-void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
-void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
-
-void (*xpc_process_activate_IRQ_rcvd) (void);
-enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
-void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
-
-void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
-int (*xpc_partition_engaged) (short partid);
-int (*xpc_any_partition_engaged) (void);
-void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
-void (*xpc_assume_partition_disengaged) (short partid);
-
-void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
-				     unsigned long *irq_flags);
-void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
-				   unsigned long *irq_flags);
-void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
-				    unsigned long *irq_flags);
-void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
-				  unsigned long *irq_flags);
-void (*xpc_send_chctl_opencomplete) (struct xpc_channel *ch,
-				  unsigned long *irq_flags);
-
-enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
-					       unsigned long msgqueue_pa);
-
-enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
-				    void *payload, u16 payload_size,
-				    u8 notify_type, xpc_notify_func func,
-				    void *key);
-void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+struct xpc_arch_operations xpc_arch_ops;
 
 /*
  * Timer function to enforce the timelimit on the partition disengage.
@@ -245,7 +184,7 @@ xpc_timeout_partition_disengage(unsigned long data)
 	(void)xpc_partition_disengaged(part);
 
 	DBUG_ON(part->disengage_timeout != 0);
-	DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
+	DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
 }
 
 /*
@@ -256,7 +195,7 @@ xpc_timeout_partition_disengage(unsigned long data)
 static void
 xpc_hb_beater(unsigned long dummy)
 {
-	xpc_increment_heartbeat();
+	xpc_arch_ops.increment_heartbeat();
 
 	if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
 		wake_up_interruptible(&xpc_activate_IRQ_wq);
@@ -268,7 +207,7 @@ xpc_hb_beater(unsigned long dummy)
 static void
 xpc_start_hb_beater(void)
 {
-	xpc_heartbeat_init();
+	xpc_arch_ops.heartbeat_init();
 	init_timer(&xpc_hb_timer);
 	xpc_hb_timer.function = xpc_hb_beater;
 	xpc_hb_beater(0);
@@ -278,7 +217,7 @@ static void
 xpc_stop_hb_beater(void)
 {
 	del_timer_sync(&xpc_hb_timer);
-	xpc_heartbeat_exit();
+	xpc_arch_ops.heartbeat_exit();
 }
 
 /*
@@ -307,7 +246,7 @@ xpc_check_remote_hb(void)
 			continue;
 		}
 
-		ret = xpc_get_remote_heartbeat(part);
+		ret = xpc_arch_ops.get_remote_heartbeat(part);
 		if (ret != xpSuccess)
 			XPC_DEACTIVATE_PARTITION(part, ret);
 	}
@@ -358,7 +297,7 @@ xpc_hb_checker(void *ignore)
 			force_IRQ = 0;
 			dev_dbg(xpc_part, "processing activate IRQs "
 				"received\n");
-			xpc_process_activate_IRQ_rcvd();
+			xpc_arch_ops.process_activate_IRQ_rcvd();
 		}
 
 		/* wait for IRQ or timeout */
@@ -533,7 +472,7 @@ xpc_setup_ch_structures(struct xpc_partition *part)
 		init_waitqueue_head(&ch->idle_wq);
 	}
 
-	ret = xpc_setup_ch_structures_sn(part);
+	ret = xpc_arch_ops.setup_ch_structures(part);
 	if (ret != xpSuccess)
 		goto out_2;
 
@@ -577,7 +516,7 @@ xpc_teardown_ch_structures(struct xpc_partition *part)
 
 	/* now we can begin tearing down the infrastructure */
 
-	xpc_teardown_ch_structures_sn(part);
+	xpc_arch_ops.teardown_ch_structures(part);
 
 	kfree(part->remote_openclose_args_base);
 	part->remote_openclose_args = NULL;
@@ -625,12 +564,12 @@ xpc_activating(void *__partid)
 
 	dev_dbg(xpc_part, "activating partition %d\n", partid);
 
-	xpc_allow_hb(partid);
+	xpc_arch_ops.allow_hb(partid);
 
 	if (xpc_setup_ch_structures(part) == xpSuccess) {
 		(void)xpc_part_ref(part);	/* this will always succeed */
 
-		if (xpc_make_first_contact(part) == xpSuccess) {
+		if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
 			xpc_mark_partition_active(part);
 			xpc_channel_mgr(part);
 			/* won't return until partition is deactivating */
@@ -640,12 +579,12 @@ xpc_activating(void *__partid)
 		xpc_teardown_ch_structures(part);
 	}
 
-	xpc_disallow_hb(partid);
+	xpc_arch_ops.disallow_hb(partid);
 	xpc_mark_partition_inactive(part);
 
 	if (part->reason == xpReactivating) {
 		/* interrupting ourselves results in activating partition */
-		xpc_request_partition_reactivation(part);
+		xpc_arch_ops.request_partition_reactivation(part);
 	}
 
 	return 0;
@@ -718,10 +657,13 @@ xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 static void
 xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 {
+	int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+		xpc_arch_ops.n_of_deliverable_payloads;
+
 	do {
 		/* deliver messages to their intended recipients */
 
-		while (xpc_n_of_deliverable_payloads(ch) > 0 &&
+		while (n_of_deliverable_payloads(ch) > 0 &&
 		       !(ch->flags & XPC_C_DISCONNECTING)) {
 			xpc_deliver_payload(ch);
 		}
@@ -737,7 +679,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 			"wait_event_interruptible_exclusive()\n");
 
 		(void)wait_event_interruptible_exclusive(ch->idle_wq,
-				(xpc_n_of_deliverable_payloads(ch) > 0 ||
+				(n_of_deliverable_payloads(ch) > 0 ||
 				 (ch->flags & XPC_C_DISCONNECTING)));
 
 		atomic_dec(&ch->kthreads_idle);
@@ -754,6 +696,8 @@ xpc_kthread_start(void *args)
 	struct xpc_channel *ch;
 	int n_needed;
 	unsigned long irq_flags;
+	int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+		xpc_arch_ops.n_of_deliverable_payloads;
 
 	dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
 		partid, ch_number);
@@ -782,7 +726,7 @@ xpc_kthread_start(void *args)
 			 * additional kthreads to help deliver them. We only
 			 * need one less than total #of messages to deliver.
 			 */
-			n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
+			n_needed = n_of_deliverable_payloads(ch) - 1;
 			if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
 				xpc_activate_kthreads(ch, n_needed);
 
@@ -810,7 +754,7 @@ xpc_kthread_start(void *args)
 
 	if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 	    atomic_dec_return(&part->nchannels_engaged) == 0) {
-		xpc_indicate_partition_disengaged(part);
+		xpc_arch_ops.indicate_partition_disengaged(part);
 	}
 
 	xpc_msgqueue_deref(ch);
@@ -842,6 +786,8 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 	u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
 	struct xpc_partition *part = &xpc_partitions[ch->partid];
 	struct task_struct *kthread;
+	void (*indicate_partition_disengaged) (struct xpc_partition *) =
+		xpc_arch_ops.indicate_partition_disengaged;
 
 	while (needed-- > 0) {
 
@@ -863,7 +809,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 
 		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
 			   atomic_inc_return(&part->nchannels_engaged) == 1) {
-				xpc_indicate_partition_engaged(part);
+			xpc_arch_ops.indicate_partition_engaged(part);
 		}
 		(void)xpc_part_ref(part);
 		xpc_msgqueue_ref(ch);
@@ -885,7 +831,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 
 			if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 			    atomic_dec_return(&part->nchannels_engaged) == 0) {
-				xpc_indicate_partition_disengaged(part);
+				indicate_partition_disengaged(part);
 			}
 			xpc_msgqueue_deref(ch);
 			xpc_part_deref(part);
@@ -998,13 +944,13 @@ xpc_setup_partitions(void)
 		atomic_set(&part->references, 0);
 	}
 
-	return xpc_setup_partitions_sn();
+	return xpc_arch_ops.setup_partitions();
 }
 
 static void
 xpc_teardown_partitions(void)
 {
-	xpc_teardown_partitions_sn();
+	xpc_arch_ops.teardown_partitions();
 	kfree(xpc_partitions);
 }
 
@@ -1060,7 +1006,7 @@ xpc_do_exit(enum xp_retval reason)
 				disengage_timeout = part->disengage_timeout;
 		}
 
-		if (xpc_any_partition_engaged()) {
+		if (xpc_arch_ops.any_partition_engaged()) {
 			if (time_is_before_jiffies(printmsg_time)) {
 				dev_info(xpc_part, "waiting for remote "
 					 "partitions to deactivate, timeout in "
@@ -1091,7 +1037,7 @@ xpc_do_exit(enum xp_retval reason)
 
 	} while (1);
 
-	DBUG_ON(xpc_any_partition_engaged());
+	DBUG_ON(xpc_arch_ops.any_partition_engaged());
 
 	xpc_teardown_rsvd_page();
 
@@ -1156,15 +1102,15 @@ xpc_die_deactivate(void)
 	/* keep xpc_hb_checker thread from doing anything (just in case) */
 	xpc_exiting = 1;
 
-	xpc_disallow_all_hbs();	/*indicate we're deactivated */
+	xpc_arch_ops.disallow_all_hbs();   /*indicate we're deactivated */
 
 	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
-		if (xpc_partition_engaged(partid) ||
+		if (xpc_arch_ops.partition_engaged(partid) ||
 		    part->act_state != XPC_P_AS_INACTIVE) {
-			xpc_request_partition_deactivation(part);
-			xpc_indicate_partition_disengaged(part);
+			xpc_arch_ops.request_partition_deactivation(part);
+			xpc_arch_ops.indicate_partition_disengaged(part);
 		}
 	}
 
@@ -1181,7 +1127,7 @@ xpc_die_deactivate(void)
 	wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
 
 	while (1) {
-		any_engaged = xpc_any_partition_engaged();
+		any_engaged = xpc_arch_ops.any_partition_engaged();
 		if (!any_engaged) {
 			dev_info(xpc_part, "all partitions have deactivated\n");
 			break;
@@ -1190,7 +1136,7 @@ xpc_die_deactivate(void)
 		if (!keep_waiting--) {
 			for (partid = 0; partid < xp_max_npartitions;
 			     partid++) {
-				if (xpc_partition_engaged(partid)) {
+				if (xpc_arch_ops.partition_engaged(partid)) {
 					dev_info(xpc_part, "deactivate from "
 						 "remote partition %d timed "
 						 "out\n", partid);
@@ -1237,7 +1183,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_ENTER:
 	case DIE_INIT_MONARCH_ENTER:
-		xpc_offline_heartbeat();
+		xpc_arch_ops.offline_heartbeat();
 		break;
 
 	case DIE_KDEBUG_LEAVE:
@@ -1248,7 +1194,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_LEAVE:
 	case DIE_INIT_MONARCH_LEAVE:
-		xpc_online_heartbeat();
+		xpc_arch_ops.online_heartbeat();
 		break;
 	}
 #else
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 6722f6fe4dc..65877bc5eda 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -70,6 +70,9 @@ xpc_get_rsvd_page_pa(int nasid)
 	size_t buf_len = 0;
 	void *buf = buf;
 	void *buf_base = NULL;
+	enum xp_retval (*get_partition_rsvd_page_pa)
+		(void *, u64 *, unsigned long *, size_t *) =
+		xpc_arch_ops.get_partition_rsvd_page_pa;
 
 	while (1) {
 
@@ -79,8 +82,7 @@ xpc_get_rsvd_page_pa(int nasid)
 		 * ??? function or have two versions? Rename rp_pa for UV to
 		 * ??? rp_gpa?
 		 */
-		ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
-						     &len);
+		ret = get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len);
 
 		dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
 			"address=0x%016lx, len=0x%016lx\n", ret,
@@ -172,7 +174,7 @@ xpc_setup_rsvd_page(void)
 	xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
 	xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
 
-	ret = xpc_setup_rsvd_page_sn(rp);
+	ret = xpc_arch_ops.setup_rsvd_page(rp);
 	if (ret != 0)
 		return ret;
 
@@ -264,7 +266,7 @@ xpc_partition_disengaged(struct xpc_partition *part)
 	short partid = XPC_PARTID(part);
 	int disengaged;
 
-	disengaged = !xpc_partition_engaged(partid);
+	disengaged = !xpc_arch_ops.partition_engaged(partid);
 	if (part->disengage_timeout) {
 		if (!disengaged) {
 			if (time_is_after_jiffies(part->disengage_timeout)) {
@@ -280,7 +282,7 @@ xpc_partition_disengaged(struct xpc_partition *part)
 			dev_info(xpc_part, "deactivate request to remote "
 				 "partition %d timed out\n", partid);
 			xpc_disengage_timedout = 1;
-			xpc_assume_partition_disengaged(partid);
+			xpc_arch_ops.assume_partition_disengaged(partid);
 			disengaged = 1;
 		}
 		part->disengage_timeout = 0;
@@ -294,7 +296,7 @@ xpc_partition_disengaged(struct xpc_partition *part)
 		if (part->act_state != XPC_P_AS_INACTIVE)
 			xpc_wakeup_channel_mgr(part);
 
-		xpc_cancel_partition_deactivation_request(part);
+		xpc_arch_ops.cancel_partition_deactivation_request(part);
 	}
 	return disengaged;
 }
@@ -339,7 +341,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		if (reason == xpReactivating) {
 			/* we interrupt ourselves to reactivate partition */
-			xpc_request_partition_reactivation(part);
+			xpc_arch_ops.request_partition_reactivation(part);
 		}
 		return;
 	}
@@ -358,7 +360,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
 	/* ask remote partition to deactivate with regard to us */
-	xpc_request_partition_deactivation(part);
+	xpc_arch_ops.request_partition_deactivation(part);
 
 	/* set a timelimit on the disengage phase of the deactivation request */
 	part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
@@ -496,7 +498,7 @@ xpc_discovery(void)
 				continue;
 			}
 
-			xpc_request_partition_activation(remote_rp,
+			xpc_arch_ops.request_partition_activation(remote_rp,
 							 remote_rp_pa, nasid);
 		}
 	}
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 09bc1989f21..915a3b495da 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -60,14 +60,14 @@ static struct xpc_vars_sn2 *xpc_vars_sn2;
 static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
 
 static int
-xpc_setup_partitions_sn_sn2(void)
+xpc_setup_partitions_sn2(void)
 {
 	/* nothing needs to be done */
 	return 0;
 }
 
 static void
-xpc_teardown_partitions_sn_sn2(void)
+xpc_teardown_partitions_sn2(void)
 {
 	/* nothing needs to be done */
 }
@@ -628,7 +628,7 @@ xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
 
 
 static int
-xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_sn2(struct xpc_rsvd_page *rp)
 {
 	struct amo *amos_page;
 	int i;
@@ -1162,7 +1162,7 @@ xpc_process_activate_IRQ_rcvd_sn2(void)
  * Setup the channel structures that are sn2 specific.
  */
 static enum xp_retval
-xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_setup_ch_structures_sn2(struct xpc_partition *part)
 {
 	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
 	struct xpc_channel_sn2 *ch_sn2;
@@ -1284,7 +1284,7 @@ out_1:
  * Teardown the channel structures that are sn2 specific.
  */
 static void
-xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_teardown_ch_structures_sn2(struct xpc_partition *part)
 {
 	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
 	short partid = XPC_PARTID(part);
@@ -2348,66 +2348,70 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
 		xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
 }
 
+static struct xpc_arch_operations xpc_arch_ops_sn2 = {
+	.setup_partitions = xpc_setup_partitions_sn2,
+	.teardown_partitions = xpc_teardown_partitions_sn2,
+	.process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2,
+	.get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2,
+	.setup_rsvd_page = xpc_setup_rsvd_page_sn2,
+
+	.allow_hb = xpc_allow_hb_sn2,
+	.disallow_hb = xpc_disallow_hb_sn2,
+	.disallow_all_hbs = xpc_disallow_all_hbs_sn2,
+	.increment_heartbeat = xpc_increment_heartbeat_sn2,
+	.offline_heartbeat = xpc_offline_heartbeat_sn2,
+	.online_heartbeat = xpc_online_heartbeat_sn2,
+	.heartbeat_init = xpc_heartbeat_init_sn2,
+	.heartbeat_exit = xpc_heartbeat_exit_sn2,
+	.get_remote_heartbeat = xpc_get_remote_heartbeat_sn2,
+
+	.request_partition_activation =
+		xpc_request_partition_activation_sn2,
+	.request_partition_reactivation =
+		xpc_request_partition_reactivation_sn2,
+	.request_partition_deactivation =
+		xpc_request_partition_deactivation_sn2,
+	.cancel_partition_deactivation_request =
+		xpc_cancel_partition_deactivation_request_sn2,
+
+	.setup_ch_structures = xpc_setup_ch_structures_sn2,
+	.teardown_ch_structures = xpc_teardown_ch_structures_sn2,
+
+	.make_first_contact = xpc_make_first_contact_sn2,
+
+	.get_chctl_all_flags = xpc_get_chctl_all_flags_sn2,
+	.send_chctl_closerequest = xpc_send_chctl_closerequest_sn2,
+	.send_chctl_closereply = xpc_send_chctl_closereply_sn2,
+	.send_chctl_openrequest = xpc_send_chctl_openrequest_sn2,
+	.send_chctl_openreply = xpc_send_chctl_openreply_sn2,
+	.send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2,
+	.process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2,
+
+	.save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2,
+
+	.setup_msg_structures = xpc_setup_msg_structures_sn2,
+	.teardown_msg_structures = xpc_teardown_msg_structures_sn2,
+
+	.indicate_partition_engaged = xpc_indicate_partition_engaged_sn2,
+	.indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2,
+	.partition_engaged = xpc_partition_engaged_sn2,
+	.any_partition_engaged = xpc_any_partition_engaged_sn2,
+	.assume_partition_disengaged = xpc_assume_partition_disengaged_sn2,
+
+	.n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2,
+	.send_payload = xpc_send_payload_sn2,
+	.get_deliverable_payload = xpc_get_deliverable_payload_sn2,
+	.received_payload = xpc_received_payload_sn2,
+	.notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2,
+};
+
 int
 xpc_init_sn2(void)
 {
 	int ret;
 	size_t buf_size;
 
-	xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
-	xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2;
-	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
-	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
-
-	xpc_allow_hb = xpc_allow_hb_sn2;
-	xpc_disallow_hb = xpc_disallow_hb_sn2;
-	xpc_disallow_all_hbs = xpc_disallow_all_hbs_sn2;
-	xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
-	xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
-	xpc_online_heartbeat = xpc_online_heartbeat_sn2;
-	xpc_heartbeat_init = xpc_heartbeat_init_sn2;
-	xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
-	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
-
-	xpc_request_partition_activation = xpc_request_partition_activation_sn2;
-	xpc_request_partition_reactivation =
-	    xpc_request_partition_reactivation_sn2;
-	xpc_request_partition_deactivation =
-	    xpc_request_partition_deactivation_sn2;
-	xpc_cancel_partition_deactivation_request =
-	    xpc_cancel_partition_deactivation_request_sn2;
-
-	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
-	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
-	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
-	xpc_make_first_contact = xpc_make_first_contact_sn2;
-
-	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
-	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
-	xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
-	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
-	xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
-	xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2;
-
-	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
-
-	xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
-	xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
-
-	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
-	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
-	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
-	xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
-
-	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
-	xpc_indicate_partition_disengaged =
-	    xpc_indicate_partition_disengaged_sn2;
-	xpc_partition_engaged = xpc_partition_engaged_sn2;
-	xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
-	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
-
-	xpc_send_payload = xpc_send_payload_sn2;
-	xpc_received_payload = xpc_received_payload_sn2;
+	xpc_arch_ops = xpc_arch_ops_sn2;
 
 	if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
 		dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 1e475b4c088..9172fcdee4e 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -62,7 +62,7 @@ static struct xpc_gru_mq_uv *xpc_activate_mq_uv;
 static struct xpc_gru_mq_uv *xpc_notify_mq_uv;
 
 static int
-xpc_setup_partitions_sn_uv(void)
+xpc_setup_partitions_uv(void)
 {
 	short partid;
 	struct xpc_partition_uv *part_uv;
@@ -78,7 +78,7 @@ xpc_setup_partitions_sn_uv(void)
 }
 
 static void
-xpc_teardown_partitions_sn_uv(void)
+xpc_teardown_partitions_uv(void)
 {
 	short partid;
 	struct xpc_partition_uv *part_uv;
@@ -782,7 +782,7 @@ xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
 }
 
 static int
-xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_uv(struct xpc_rsvd_page *rp)
 {
 	xpc_heartbeat_uv =
 	    &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat;
@@ -980,7 +980,7 @@ xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head)
  * Setup the channel structures that are uv specific.
  */
 static enum xp_retval
-xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_setup_ch_structures_uv(struct xpc_partition *part)
 {
 	struct xpc_channel_uv *ch_uv;
 	int ch_number;
@@ -999,7 +999,7 @@ xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
  * Teardown the channel structures that are uv specific.
  */
 static void
-xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_teardown_ch_structures_uv(struct xpc_partition *part)
 {
 	/* nothing needs to be done */
 	return;
@@ -1649,63 +1649,67 @@ xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
 	msg->hdr.msg_slot_number += ch->remote_nentries;
 }
 
+static struct xpc_arch_operations xpc_arch_ops_uv = {
+	.setup_partitions = xpc_setup_partitions_uv,
+	.teardown_partitions = xpc_teardown_partitions_uv,
+	.process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv,
+	.get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv,
+	.setup_rsvd_page = xpc_setup_rsvd_page_uv,
+
+	.allow_hb = xpc_allow_hb_uv,
+	.disallow_hb = xpc_disallow_hb_uv,
+	.disallow_all_hbs = xpc_disallow_all_hbs_uv,
+	.increment_heartbeat = xpc_increment_heartbeat_uv,
+	.offline_heartbeat = xpc_offline_heartbeat_uv,
+	.online_heartbeat = xpc_online_heartbeat_uv,
+	.heartbeat_init = xpc_heartbeat_init_uv,
+	.heartbeat_exit = xpc_heartbeat_exit_uv,
+	.get_remote_heartbeat = xpc_get_remote_heartbeat_uv,
+
+	.request_partition_activation =
+		xpc_request_partition_activation_uv,
+	.request_partition_reactivation =
+		xpc_request_partition_reactivation_uv,
+	.request_partition_deactivation =
+		xpc_request_partition_deactivation_uv,
+	.cancel_partition_deactivation_request =
+		xpc_cancel_partition_deactivation_request_uv,
+
+	.setup_ch_structures = xpc_setup_ch_structures_uv,
+	.teardown_ch_structures = xpc_teardown_ch_structures_uv,
+
+	.make_first_contact = xpc_make_first_contact_uv,
+
+	.get_chctl_all_flags = xpc_get_chctl_all_flags_uv,
+	.send_chctl_closerequest = xpc_send_chctl_closerequest_uv,
+	.send_chctl_closereply = xpc_send_chctl_closereply_uv,
+	.send_chctl_openrequest = xpc_send_chctl_openrequest_uv,
+	.send_chctl_openreply = xpc_send_chctl_openreply_uv,
+	.send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv,
+	.process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv,
+
+	.save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv,
+
+	.setup_msg_structures = xpc_setup_msg_structures_uv,
+	.teardown_msg_structures = xpc_teardown_msg_structures_uv,
+
+	.indicate_partition_engaged = xpc_indicate_partition_engaged_uv,
+	.indicate_partition_disengaged = xpc_indicate_partition_disengaged_uv,
+	.assume_partition_disengaged = xpc_assume_partition_disengaged_uv,
+	.partition_engaged = xpc_partition_engaged_uv,
+	.any_partition_engaged = xpc_any_partition_engaged_uv,
+
+	.n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv,
+	.send_payload = xpc_send_payload_uv,
+	.get_deliverable_payload = xpc_get_deliverable_payload_uv,
+	.received_payload = xpc_received_payload_uv,
+	.notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv,
+};
+
 int
 xpc_init_uv(void)
 {
-	xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
-	xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_uv;
-	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
-	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
-	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
-
-	xpc_allow_hb = xpc_allow_hb_uv;
-	xpc_disallow_hb = xpc_disallow_hb_uv;
-	xpc_disallow_all_hbs = xpc_disallow_all_hbs_uv;
-	xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
-	xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
-	xpc_online_heartbeat = xpc_online_heartbeat_uv;
-	xpc_heartbeat_init = xpc_heartbeat_init_uv;
-	xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
-	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
-
-	xpc_request_partition_activation = xpc_request_partition_activation_uv;
-	xpc_request_partition_reactivation =
-	    xpc_request_partition_reactivation_uv;
-	xpc_request_partition_deactivation =
-	    xpc_request_partition_deactivation_uv;
-	xpc_cancel_partition_deactivation_request =
-	    xpc_cancel_partition_deactivation_request_uv;
-
-	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
-	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
-
-	xpc_make_first_contact = xpc_make_first_contact_uv;
-
-	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
-	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
-	xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
-	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
-	xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
-	xpc_send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv;
-
-	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
-
-	xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
-	xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
-
-	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
-	xpc_indicate_partition_disengaged =
-	    xpc_indicate_partition_disengaged_uv;
-	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
-	xpc_partition_engaged = xpc_partition_engaged_uv;
-	xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
-
-	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
-	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
-	xpc_send_payload = xpc_send_payload_uv;
-	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
-	xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
-	xpc_received_payload = xpc_received_payload_uv;
+	xpc_arch_ops = xpc_arch_ops_uv;
 
 	if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
 		dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
-- 
GitLab


From e6da46b273443c8cebef81a68b2d0d955b8a07b4 Mon Sep 17 00:00:00 2001
From: Jeff Haran <jharan@Brocade.COM>
Date: Mon, 13 Apr 2009 14:40:20 -0700
Subject: [PATCH 0152/1421] edac: fix local pci_write_bits32

Fix the edac local pci_write_bits32 to properly note the 'escape' mask if
all ones in a 32-bit word.

Currently no consumer of this function uses that mask, so there is no
danger to existing code.

Signed-off-by: Jeff Haran <jharan@Brocade.COM>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/edac_core.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 28f2c3f959b..6ad95c8d636 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -767,11 +767,19 @@ static inline void pci_write_bits16(struct pci_dev *pdev, int offset,
 	pci_write_config_word(pdev, offset, value);
 }
 
-/* write all or some bits in a dword-register*/
+/*
+ * pci_write_bits32
+ *
+ * edac local routine to do pci_write_config_dword, but adds
+ * a mask parameter. If mask is all ones, ignore the mask.
+ * Otherwise utilize the mask to isolate specified bits
+ *
+ * write all or some bits in a dword-register
+ */
 static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
 				    u32 value, u32 mask)
 {
-	if (mask != 0xffff) {
+	if (mask != 0xffffffff) {
 		u32 buf;
 
 		pci_read_config_dword(pdev, offset, &buf);
-- 
GitLab


From fbeb4384748abb78531bbe1e80d627412a0abcfa Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 13 Apr 2009 14:40:21 -0700
Subject: [PATCH 0153/1421] edac: use to_delayed_work()

The edac-core driver includes code which assumes that the work_struct
which is included in every delayed_work is the first member of that
structure.  This is currently the case but might change in the future, so
use to_delayed_work() instead, which doesn't make such an assumption.

linux-2.6.30-rc1 has the to_delayed_work() function that will allow this
patch to work

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/edac_device.c | 2 +-
 drivers/edac/edac_mc.c     | 2 +-
 drivers/edac/edac_pci.c    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index ca9113e1c10..a7d2c717d03 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -389,7 +389,7 @@ static void del_edac_device_from_global_list(struct edac_device_ctl_info
  */
 static void edac_device_workq_function(struct work_struct *work_req)
 {
-	struct delayed_work *d_work = (struct delayed_work *)work_req;
+	struct delayed_work *d_work = to_delayed_work(work_req);
 	struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work);
 
 	mutex_lock(&device_ctls_mutex);
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 25d66940b4f..335b7ebdb11 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -260,7 +260,7 @@ static int edac_mc_assert_error_check_and_clear(void)
  */
 static void edac_mc_workq_function(struct work_struct *work_req)
 {
-	struct delayed_work *d_work = (struct delayed_work *)work_req;
+	struct delayed_work *d_work = to_delayed_work(work_req);
 	struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
 
 	mutex_lock(&mem_ctls_mutex);
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
index 5b150aea703..30b585b1d60 100644
--- a/drivers/edac/edac_pci.c
+++ b/drivers/edac/edac_pci.c
@@ -233,7 +233,7 @@ EXPORT_SYMBOL_GPL(edac_pci_find);
  */
 static void edac_pci_workq_function(struct work_struct *work_req)
 {
-	struct delayed_work *d_work = (struct delayed_work *)work_req;
+	struct delayed_work *d_work = to_delayed_work(work_req);
 	struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work);
 	int msec;
 	unsigned long delay;
-- 
GitLab


From 0ee50254dfe0c96f9eef4fc9fdf47a18d6a12df3 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 10 Apr 2009 00:54:07 +0000
Subject: [PATCH 0154/1421] sh: sh7786: modify usb setup timeout judgment bug.

This corrects a race with the PHY RST bit not being set properly if the
PLL status changes right before timeout. This resulted in it potentially
failing even if the device came up in time.

Special thanks to Mr. Juha Leppanen and Iwamatsu-san for reporting this
out and reviewing it.

Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 5a47e1cf442..90e8cfff55f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -143,14 +143,14 @@ static void __init sh7786_usb_setup(void)
 	 * Set the PHY and PLL enable bit
 	 */
 	__raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
-	while (i-- &&
-	       ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS))
+	while (i--) {
+		if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
+			/* Set the PHY RST bit */
+			__raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+			printk(KERN_INFO "sh7786 usb setup done\n");
+			break;
+		}
 		cpu_relax();
-
-	if (i) {
-		/* Set the PHY RST bit */
-		__raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
-		printk(KERN_INFO "sh7786 usb setup done\n");
 	}
 }
 
-- 
GitLab


From 17a7b7b39056a82c5012539311850f202e6c3cd4 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Date: Mon, 13 Apr 2009 11:04:19 +0900
Subject: [PATCH 0155/1421] tomoyo: add Documentation/tomoyo.txt

Signed-off-by: Kentaro Takeda <takedakn@nttdata.co.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toshiharu Harada <haradats@nttdata.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>
---
 Documentation/tomoyo.txt | 55 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/tomoyo.txt

diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt
new file mode 100644
index 00000000000..b3a232cae7f
--- /dev/null
+++ b/Documentation/tomoyo.txt
@@ -0,0 +1,55 @@
+--- What is TOMOYO? ---
+
+TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
+
+LiveCD-based tutorials are available at
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+Though these tutorials use non-LSM version of TOMOYO, they are useful for you
+to know what TOMOYO is.
+
+--- How to enable TOMOYO? ---
+
+Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
+kernel's command line.
+
+Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+
+--- Where is documentation? ---
+
+User <-> Kernel interface documentation is available at
+http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+
+Materials we prepared for seminars and symposiums are available at
+http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+Below lists are chosen from three aspects.
+
+What is TOMOYO?
+  TOMOYO Linux Overview
+    http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+  TOMOYO Linux: pragmatic and manageable security for Linux
+    http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+  TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
+    http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+
+What can TOMOYO do?
+  Deep inside TOMOYO Linux
+    http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+  The role of "pathname based access control" in security.
+    http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+
+History of TOMOYO?
+  Realities of Mainlining
+    http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf
+
+--- What is future plan? ---
+
+We believe that inode based security and name based security are complementary
+and both should be used together. But unfortunately, so far, we cannot enable
+multiple LSM modules at the same time. We feel sorry that you have to give up
+SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
+
+We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
+to port non-LSM version's functionalities to LSM versions.
-- 
GitLab


From 39826a1e17c1957bd7b5cd7815b83940e5e3a230 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Wed, 8 Apr 2009 22:31:28 +0900
Subject: [PATCH 0156/1421] tomoyo: version bump to 2.2.0.

Signed-off-by: Kentaro Takeda <takedakn@nttdata.co.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toshiharu Harada <haradats@nttdata.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/tomoyo/common.c   | 6 +++---
 security/tomoyo/common.h   | 2 +-
 security/tomoyo/domain.c   | 2 +-
 security/tomoyo/file.c     | 2 +-
 security/tomoyo/realpath.c | 2 +-
 security/tomoyo/realpath.h | 2 +-
 security/tomoyo/tomoyo.c   | 2 +-
 security/tomoyo/tomoyo.h   | 2 +-
 8 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index a0affd9cfca..d4d41b3efc7 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
@@ -1773,7 +1773,7 @@ void tomoyo_load_policy(const char *filename)
 	envp[2] = NULL;
 	call_usermodehelper(argv[0], argv, envp, 1);
 
-	printk(KERN_INFO "TOMOYO: 2.2.0-pre   2009/02/01\n");
+	printk(KERN_INFO "TOMOYO: 2.2.0   2009/04/01\n");
 	printk(KERN_INFO "Mandatory Access Control activated.\n");
 	tomoyo_policy_loaded = true;
 	{ /* Check all profiles currently assigned to domains are defined. */
@@ -1800,7 +1800,7 @@ void tomoyo_load_policy(const char *filename)
 static int tomoyo_read_version(struct tomoyo_io_buffer *head)
 {
 	if (!head->read_eof) {
-		tomoyo_io_printf(head, "2.2.0-pre");
+		tomoyo_io_printf(head, "2.2.0");
 		head->read_eof = true;
 	}
 	return 0;
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index e77e6a6de0f..678f4ff16aa 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index 2f2b449ffd2..2d6748741a2 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 65f50c1c5ee..2316da8ec5b 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index 3bbe01a7a4b..bf8e2b45168 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
diff --git a/security/tomoyo/realpath.h b/security/tomoyo/realpath.h
index 7ec9fc9cbc0..78217a37960 100644
--- a/security/tomoyo/realpath.h
+++ b/security/tomoyo/realpath.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 3eeeae12c4d..5b481912752 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h
index a0c8f6e0bea..41c6ebafb9c 100644
--- a/security/tomoyo/tomoyo.h
+++ b/security/tomoyo/tomoyo.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2005-2009  NTT DATA CORPORATION
  *
- * Version: 2.2.0-pre   2009/02/01
+ * Version: 2.2.0   2009/04/01
  *
  */
 
-- 
GitLab


From 132380a06b24704fd6c9be55c44d4ef3972cead2 Mon Sep 17 00:00:00 2001
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Thu, 2 Apr 2009 14:18:25 +0800
Subject: [PATCH 0157/1421] tracing, sched: mark get_parent_ip() notrace

Impact: remove overly redundant tracing entries

When tracer is "function" or "function_graph", way too much
"get_parent_ip" entries are recorded in ring_buffer.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D458B1.5000703@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 5724508c3b6..e90e70ed36a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4846,7 +4846,7 @@ void scheduler_tick(void)
 #endif
 }
 
-unsigned long get_parent_ip(unsigned long addr)
+notrace unsigned long get_parent_ip(unsigned long addr)
 {
 	if (in_lock_functions(addr)) {
 		addr = CALLER_ADDR2;
-- 
GitLab


From 557055bebe9212dfa6b9f5df811dfd0dac77ec55 Mon Sep 17 00:00:00 2001
From: Zhaolei <zhaolei@cn.fujitsu.com>
Date: Mon, 13 Apr 2009 16:02:34 +0800
Subject: [PATCH 0158/1421] tracing: Fix branch tracer header

Before patch:

  # tracer: branch
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
  #              | |       |          |         |
             <...>-2981  [000] 24008.872738: [  ok  ] trace_irq_handler_exit:irq_event_types.h:41
             <...>-2981  [000] 24008.872742: [  ok  ] note_interrupt:spurious.c:229
  ...

After patch:

  # tracer: branch
  #
  #           TASK-PID    CPU#    TIMESTAMP  CORRECT  FUNC:FILE:LINE
  #              | |       |          |         |       |
             <...>-2985  [000] 26329.142970: [  ok  ] slab_free:slub.c:1776
             <...>-2985  [000] 26329.142972: [  ok  ] trace_kmem_cache_free:kmem_event_types.h:191
  ...

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49E2F19A.3040006@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_branch.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index ad8c22efff4..8333715e406 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -155,6 +155,13 @@ static enum print_line_t trace_branch_print(struct trace_iterator *iter,
 	return TRACE_TYPE_HANDLED;
 }
 
+static void branch_print_header(struct seq_file *s)
+{
+	seq_puts(s, "#           TASK-PID    CPU#    TIMESTAMP  CORRECT"
+		"  FUNC:FILE:LINE\n");
+	seq_puts(s, "#              | |       |          |         |   "
+		"    |\n");
+}
 
 static struct trace_event trace_branch_event = {
 	.type		= TRACE_BRANCH,
@@ -169,6 +176,7 @@ static struct tracer branch_trace __read_mostly =
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest	= trace_selftest_startup_branch,
 #endif /* CONFIG_FTRACE_SELFTEST */
+	.print_header	= branch_print_header,
 };
 
 __init static int init_branch_tracer(void)
-- 
GitLab


From ff6c6fed3a8ab9b0a7b02574e095e905e89421d9 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sun, 12 Apr 2009 23:24:21 +0530
Subject: [PATCH 0159/1421] x86: pci-swiotlb.c swiotlb_dma_ops should be static

Impact: reduce kernel size a bit, address sparse warning

Addresses the problem pointed out by this sparse warning:

  arch/x86/kernel/pci-swiotlb.c:53:20: warning: symbol 'swiotlb_dma_ops' was not declared. Should it be static?

For x86: swiotlb_dma_ops can be static, because it's not used outside
of pci-swiotlb.c

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <1239558861.3938.2.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pci-swiotlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 34f12e9996e..221a3853e26 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -50,7 +50,7 @@ static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags);
 }
 
-struct dma_map_ops swiotlb_dma_ops = {
+static struct dma_map_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = x86_swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
-- 
GitLab


From 1c98aa7424ff163637d8321674ec58dee28152d4 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 13 Apr 2009 18:09:20 -0700
Subject: [PATCH 0160/1421] Fix quilt merge error in acpi-cpufreq.c

We ended up incorrectly using '&cur' instead of '&readin' in the
work_on_cpu() -> smp_call_function_single() transformation in commit
01599fca6758d2cd133e78f87426fc851c9ea725 ("cpufreq: use
smp_call_function_[single|many]() in acpi-cpufreq.c").

Andrew explains:
 "OK, the acpi tree went and had conflicting changes merged into it after
  I'd written the patch and it appears that I incorrectly reverted part
  of 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c while fixing the resulting
  rejects.

  Switching it to `readin' looks correct."

Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 3e3cd3db7a0..837c2c4cc20 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -277,7 +277,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 	unsigned int perf_percent;
 	unsigned int retval;
 
-	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1))
+	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
 		return 0;
 
 	cur.aperf.whole = readin.aperf.whole -
-- 
GitLab


From 63fe08177f92ce21929df8af6361491b98ad12cd Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 14 Apr 2009 12:01:53 +1000
Subject: [PATCH 0161/1421] md: tiny md.h cleanups

- update inclusion guard and make sure it covers the whole file
 - remove superflous #ifdef CONFIG_BLOCK
 - make sure all required headers are included so that new users aren't
   required to include others before

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.h | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/md/md.h b/drivers/md/md.h
index e9b7f54c24d..8227ab909d4 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -12,10 +12,17 @@
    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
 */
 
-#ifndef _MD_K_H
-#define _MD_K_H
-
-#ifdef CONFIG_BLOCK
+#ifndef _MD_MD_H
+#define _MD_MD_H
+
+#include <linux/blkdev.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
 
 #define MaxSector (~(sector_t)0)
 
@@ -408,10 +415,6 @@ static inline void safe_put_page(struct page *p)
 	if (p) put_page(p);
 }
 
-#endif /* CONFIG_BLOCK */
-#endif
-
-
 extern int register_md_personality(struct mdk_personality *p);
 extern int unregister_md_personality(struct mdk_personality *p);
 extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
@@ -434,3 +437,5 @@ extern void md_new_event(mddev_t *mddev);
 extern int md_allow_write(mddev_t *mddev);
 extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
+
+#endif /* _MD_MD_H */
-- 
GitLab


From 6d56e278444bc8323b1bcfcada126b8e4dbba0f4 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 14 Apr 2009 12:01:57 +1000
Subject: [PATCH 0162/1421] md: allow setting newly added device to 'in_sync'
 via sysfs.

When adding devices to an active array via sysfs, there is currently
no way to mark a device as 'in-sync' which is useful when
incrementally assembling an array.

So add that option.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index ed5727c089a..298731b8e95 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2086,6 +2086,7 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 	 *  -writemostly - clears write_mostly
 	 *  blocked - sets the Blocked flag
 	 *  -blocked - clears the Blocked flag
+	 *  insync - sets Insync providing device isn't active
 	 */
 	int err = -EINVAL;
 	if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
@@ -2117,6 +2118,9 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 		set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery);
 		md_wakeup_thread(rdev->mddev->thread);
 
+		err = 0;
+	} else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
+		set_bit(In_sync, &rdev->flags);
 		err = 0;
 	}
 	if (!err && rdev->sysfs_state)
@@ -2190,7 +2194,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 	} else if (rdev->mddev->pers) {
 		mdk_rdev_t *rdev2;
 		/* Activating a spare .. or possibly reactivating
-		 * if we every get bitmaps working here.
+		 * if we ever get bitmaps working here.
 		 */
 
 		if (rdev->raid_disk != -1)
-- 
GitLab


From 7b41f5688c1e03c41c772cd1766d6d80189380dd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 14 Apr 2009 15:22:15 +0900
Subject: [PATCH 0163/1421] sh: Pre-allocate a reasonable number of DMA debug
 entries.

This prevents the DMA API debugging from running out of entries right
away on boot. Defines 4096 entries by default, which while a bit on the
heavy side, ought to leave enough breathing room for some time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/consistent.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 8c9ee855328..e098ec158dd 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,12 +10,22 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
+#include <linux/io.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
-#include <asm/io.h>
+
+#define PREALLOC_DMA_DEBUG_ENTRIES	4096
+
+static int __init dma_init(void)
+{
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+	return 0;
+}
+fs_initcall(dma_init);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
-- 
GitLab


From e588a00fe546695e93077b3f7b7009f0c31d9370 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 14 Apr 2009 15:23:40 +0900
Subject: [PATCH 0164/1421] sh: Add in PCI bus for DMA API debugging.

This adds in the pci_bus_type for DMA API debug.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index e36c7b87086..0d6ac7a1db4 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/dma-debug.h>
 #include <asm/io.h>
 
 static int __init pcibios_init(void)
@@ -43,6 +44,8 @@ static int __init pcibios_init(void)
 
 	pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
 
+	dma_debug_add_bus(&pci_bus_type);
+
 	return 0;
 }
 subsys_initcall(pcibios_init);
-- 
GitLab


From acb180b0e335ad88acfed6c8a33e39c05b95dc49 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 14 Apr 2009 16:28:34 +1000
Subject: [PATCH 0165/1421] md: improve usefulness and accuracy of sysfs file
 md/sync_completed.

The sync_completed file reports how much of a resync (or recovery or
reshape) has been completed.
However due to the possibility of out-of-order completion of writes,
it is not certain to be accurate.

We have an internal value - mddev->curr_resync_completed - which is an
accurate value (though it might not always be quite so uptodate).

So:
 - make curr_resync_completed be uptodate a little more often,
   particularly when raid5 reshape updates status in the metadata
 - report curr_resync_completed in the sysfs file
 - allow poll/select to report all updates to md/sync_completed.

This makes sync_completed completed usable by any external metadata
handler that wants to record this status information in its metadata.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/bitmap.c |  1 +
 drivers/md/md.c     | 34 ++++++++++++++++++++++------------
 drivers/md/raid5.c  |  4 ++++
 3 files changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index f8a9f7ab2cb..e4510c976b3 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1479,6 +1479,7 @@ void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector)
 		s += blocks;
 	}
 	bitmap->last_end_sync = jiffies;
+	sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
 }
 
 static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 298731b8e95..7af64f3846a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2017,6 +2017,8 @@ repeat:
 	clear_bit(MD_CHANGE_PENDING, &mddev->flags);
 	spin_unlock_irq(&mddev->write_lock);
 	wake_up(&mddev->sb_wait);
+	if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+		sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 
 }
 
@@ -3486,12 +3488,15 @@ sync_completed_show(mddev_t *mddev, char *page)
 {
 	unsigned long max_sectors, resync;
 
+	if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+		return sprintf(page, "none\n");
+
 	if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
 		max_sectors = mddev->resync_max_sectors;
 	else
 		max_sectors = mddev->dev_sectors;
 
-	resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+	resync = mddev->curr_resync_completed;
 	return sprintf(page, "%lu / %lu\n", resync, max_sectors);
 }
 
@@ -6338,18 +6343,12 @@ void md_do_sync(mddev_t *mddev)
 		sector_t sectors;
 
 		skipped = 0;
-		if (j >= mddev->resync_max) {
-			sysfs_notify(&mddev->kobj, NULL, "sync_completed");
-			wait_event(mddev->recovery_wait,
-				   mddev->resync_max > j
-				   || kthread_should_stop());
-		}
-		if (kthread_should_stop())
-			goto interrupted;
 
-		if (mddev->curr_resync > mddev->curr_resync_completed &&
-		    (mddev->curr_resync - mddev->curr_resync_completed)
-		    > (max_sectors >> 4)) {
+		if ((mddev->curr_resync > mddev->curr_resync_completed &&
+		     (mddev->curr_resync - mddev->curr_resync_completed)
+		    > (max_sectors >> 4)) ||
+		    j >= mddev->resync_max
+			) {
 			/* time to update curr_resync_completed */
 			blk_unplug(mddev->queue);
 			wait_event(mddev->recovery_wait,
@@ -6357,7 +6356,17 @@ void md_do_sync(mddev_t *mddev)
 			mddev->curr_resync_completed =
 				mddev->curr_resync;
 			set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+			sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 		}
+
+		if (j >= mddev->resync_max)
+			wait_event(mddev->recovery_wait,
+				   mddev->resync_max > j
+				   || kthread_should_stop());
+
+		if (kthread_should_stop())
+			goto interrupted;
+
 		sectors = mddev->pers->sync_request(mddev, j, &skipped,
 						  currspeed < speed_min(mddev));
 		if (sectors == 0) {
@@ -6465,6 +6474,7 @@ void md_do_sync(mddev_t *mddev)
 
  skip:
 	mddev->curr_resync = 0;
+	mddev->curr_resync_completed = 0;
 	mddev->resync_min = 0;
 	mddev->resync_max = MaxSector;
 	sysfs_notify(&mddev->kobj, NULL, "sync_completed");
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3bbc6d64704..76892ac7254 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3845,6 +3845,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		wait_event(conf->wait_for_overlap,
 			   atomic_read(&conf->reshape_stripes)==0);
 		mddev->reshape_position = conf->reshape_progress;
+		mddev->curr_resync_completed = mddev->curr_resync;
 		conf->reshape_checkpoint = jiffies;
 		set_bit(MD_CHANGE_DEVS, &mddev->flags);
 		md_wakeup_thread(mddev->thread);
@@ -3854,6 +3855,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		conf->reshape_safe = mddev->reshape_position;
 		spin_unlock_irq(&conf->device_lock);
 		wake_up(&conf->wait_for_overlap);
+		sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 	}
 
 	if (mddev->delta_disks < 0) {
@@ -3943,6 +3945,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		wait_event(conf->wait_for_overlap,
 			   atomic_read(&conf->reshape_stripes) == 0);
 		mddev->reshape_position = conf->reshape_progress;
+		mddev->curr_resync_completed = mddev->curr_resync;
 		conf->reshape_checkpoint = jiffies;
 		set_bit(MD_CHANGE_DEVS, &mddev->flags);
 		md_wakeup_thread(mddev->thread);
@@ -3953,6 +3956,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 		conf->reshape_safe = mddev->reshape_position;
 		spin_unlock_irq(&conf->device_lock);
 		wake_up(&conf->wait_for_overlap);
+		sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 	}
 	return reshape_sectors;
 }
-- 
GitLab


From 5a9bd51810bce6ac79b65f07116035b6b217986e Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 13 Apr 2009 20:51:22 +0200
Subject: [PATCH 0166/1421] microblaze: Fix problem with removing zero length
 files

Adding one new line was recommended solution.
Test with make distclean

Tested-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/auxvec.h   | 1 +
 arch/microblaze/include/asm/cputable.h | 1 +
 arch/microblaze/include/asm/hw_irq.h   | 1 +
 arch/microblaze/include/asm/user.h     | 1 +
 arch/microblaze/include/asm/vga.h      | 1 +
 5 files changed, 5 insertions(+)

diff --git a/arch/microblaze/include/asm/auxvec.h b/arch/microblaze/include/asm/auxvec.h
index e69de29bb2d..8b137891791 100644
--- a/arch/microblaze/include/asm/auxvec.h
+++ b/arch/microblaze/include/asm/auxvec.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/cputable.h b/arch/microblaze/include/asm/cputable.h
index e69de29bb2d..8b137891791 100644
--- a/arch/microblaze/include/asm/cputable.h
+++ b/arch/microblaze/include/asm/cputable.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/hw_irq.h b/arch/microblaze/include/asm/hw_irq.h
index e69de29bb2d..8b137891791 100644
--- a/arch/microblaze/include/asm/hw_irq.h
+++ b/arch/microblaze/include/asm/hw_irq.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/user.h b/arch/microblaze/include/asm/user.h
index e69de29bb2d..8b137891791 100644
--- a/arch/microblaze/include/asm/user.h
+++ b/arch/microblaze/include/asm/user.h
@@ -0,0 +1 @@
+
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index e69de29bb2d..8b137891791 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -0,0 +1 @@
+
-- 
GitLab


From 6c149fd7cda601ebd178dd2f07ccff6bb0d010cf Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 14 Apr 2009 08:37:30 +0200
Subject: [PATCH 0167/1421] microblaze: Add missing empty ftrace.h file

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/ftrace.h | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 arch/microblaze/include/asm/ftrace.h

diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
new file mode 100644
index 00000000000..8b137891791
--- /dev/null
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -0,0 +1 @@
+
-- 
GitLab


From 39141bfcad22e6d7393c0d0f81b2e180db6983df Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 14 Apr 2009 09:16:01 +0200
Subject: [PATCH 0168/1421] microblaze: Add TIMESTAMPING constants to socket.h

This changes was introduce with
commit: cb9eff097831007afb30d64373f29d99825d0068

net: new user space API for time stamping of incoming and outgoing packets

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/socket.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index f919b6b540a..82593686031 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -63,4 +63,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_MICROBLAZE_SOCKET_H */
-- 
GitLab


From a8fb748e89957426fafb2e2efccd5ce635d6f530 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 14 Apr 2009 09:18:19 +0200
Subject: [PATCH 0169/1421] microblaze: Simplify copy_thread()

Removing nr parameter from copy_tread function
commit 6f2c55b843836d26528c56a0968689accaedbc67

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/process.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 60e9ed7d313..436f26ccbfa 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -115,8 +115,7 @@ void flush_thread(void)
 {
 }
 
-/* FIXME - here will be a proposed change -> remove nr parameter */
-int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+int copy_thread(unsigned long clone_flags, unsigned long usp,
 		unsigned long unused,
 		struct task_struct *p, struct pt_regs *regs)
 {
-- 
GitLab


From 5a86dc1a749211fd87341ee7943f985cde71ea11 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 14 Apr 2009 09:38:06 +0200
Subject: [PATCH 0170/1421] microblaze: struct device - replace bus_id with
 dev_name()

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/of_device.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c
index 717edf4ad0b..9a0f7632c47 100644
--- a/arch/microblaze/kernel/of_device.c
+++ b/arch/microblaze/kernel/of_device.c
@@ -13,7 +13,6 @@ void of_device_make_bus_id(struct of_device *dev)
 {
 	static atomic_t bus_no_reg_magic;
 	struct device_node *node = dev->node;
-	char *name = dev->dev.bus_id;
 	const u32 *reg;
 	u64 addr;
 	int magic;
@@ -25,9 +24,8 @@ void of_device_make_bus_id(struct of_device *dev)
 	if (reg) {
 		addr = of_translate_address(node, reg);
 		if (addr != OF_BAD_ADDR) {
-			snprintf(name, BUS_ID_SIZE,
-				 "%llx.%s", (unsigned long long)addr,
-				 node->name);
+			dev_set_name(&dev->dev, "%llx.%s",
+				     (unsigned long long)addr, node->name);
 			return;
 		}
 	}
@@ -37,7 +35,7 @@ void of_device_make_bus_id(struct of_device *dev)
 	 * counter (and pray...)
 	 */
 	magic = atomic_add_return(1, &bus_no_reg_magic);
-	snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1);
+	dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
 }
 EXPORT_SYMBOL(of_device_make_bus_id);
 
@@ -58,7 +56,7 @@ struct of_device *of_device_alloc(struct device_node *np,
 	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
-		strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+		dev_set_name(&dev->dev, bus_id);
 	else
 		of_device_make_bus_id(dev);
 
-- 
GitLab


From 00300d6746b96ca9dba100ea9ea8d01737cc9a4d Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 14 Apr 2009 06:56:15 +0800
Subject: [PATCH 0171/1421] microblaze: remove duplicated #include's

Remove duplicated #include's in
  arch/microblaze/include/asm/io.h
  arch/microblaze/kernel/prom.c
  arch/microblaze/kernel/ptrace.c
  arch/microblaze/kernel/signal.c
  arch/microblaze/kernel/sys_microblaze.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/io.h        | 1 -
 arch/microblaze/kernel/prom.c           | 1 -
 arch/microblaze/kernel/ptrace.c         | 1 -
 arch/microblaze/kernel/signal.c         | 1 -
 arch/microblaze/kernel/sys_microblaze.c | 2 --
 5 files changed, 6 deletions(-)

diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index cfab0342588..8b5853ee6b5 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -12,7 +12,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
-#include <asm/page.h>
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 475b1fac5cf..34c48718061 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -39,7 +39,6 @@
 #include <asm/system.h>
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
-#include <linux/pci.h>
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 3171e39e322..b86aa623e36 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -32,7 +32,6 @@
 #include <linux/signal.h>
 
 #include <linux/errno.h>
-#include <linux/ptrace.h>
 #include <asm/processor.h>
 #include <linux/uaccess.h>
 #include <asm/asm-offsets.h>
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index ff347b98863..3889cf45fa7 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -37,7 +37,6 @@
 #include <linux/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
-#include <linux/signal.h>
 #include <linux/syscalls.h>
 #include <asm/cacheflush.h>
 #include <asm/syscalls.h>
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index d90b548fb1b..ba0568c2cc1 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -29,9 +29,7 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/fs.h>
-#include <linux/ipc.h>
 #include <linux/semaphore.h>
-#include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
-- 
GitLab


From 27b19565fe4ca5b0e9d2ae98ce4b81ca728bf445 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 14 Apr 2009 11:03:12 +0200
Subject: [PATCH 0172/1421] lockdep: warn about lockdep disabling after kernel
 taint, fix

Impact: build fix for Sparc and s390

Stephen Rothwell reported that the Sparc build broke:

 In file included from kernel/panic.c:12:
 include/linux/debug_locks.h: In function '__debug_locks_off':
 include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg'

due to:

 9eeba61: lockdep: warn about lockdep disabling after kernel taint

There is some inconsistency between architectures about where exactly
xchg() is defined.

The traditional place is in system.h but the more logical point for it
is in atomic.h - where most architectures (especially new ones) have
it defined. These architecture also still offer it via system.h.

Some, such as Sparc or s390 only have it in asm/system.h and not available
via asm/atomic.h at all.

Use the widest set of headers in debug_locks.h and also include asm/system.h.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/debug_locks.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index 493dedb7a67..29b3ce3f2a1 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <asm/atomic.h>
+#include <asm/system.h>
 
 struct task_struct;
 
-- 
GitLab


From ef631b0ca01655d24e9ca7e199262c4a46416a26 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Mon, 13 Apr 2009 21:31:16 -0700
Subject: [PATCH 0173/1421] rcu: Make hierarchical RCU less IPI-happy

This patch fixes a hierarchical-RCU performance bug located by Anton
Blanchard.  The problem stems from a misguided attempt to provide a
work-around for jiffies-counter failure.  This work-around uses a per-CPU
n_rcu_pending counter, which is incremented on each call to rcu_pending(),
which in turn is called from each scheduling-clock interrupt.  Each CPU
then treats this counter as a surrogate for the jiffies counter, so
that if the jiffies counter fails to advance, the per-CPU n_rcu_pending
counter will cause RCU to invoke force_quiescent_state(), which in turn
will (among other things) send resched IPIs to CPUs that have thus far
failed to pass through an RCU quiescent state.

Unfortunately, each CPU resets only its own counter after sending a
batch of IPIs.  This means that the other CPUs will also (needlessly)
send -another- round of IPIs, for a full N-squared set of IPIs in the
worst case every three scheduler-clock ticks until the grace period
finally ends.  It is not reasonable for a given CPU to reset each and
every n_rcu_pending for all the other CPUs, so this patch instead simply
disables the jiffies-counter "training wheels", thus eliminating the
excessive IPIs.

Note that the jiffies-counter IPIs do not have this problem due to
the fact that the jiffies counter is global, so that the CPU sending
the IPIs can easily reset things, thus preventing the other CPUs from
sending redundant IPIs.

Note also that the n_rcu_pending counter remains, as it will continue to
be used for tracing.  It may also see use to update the jiffies counter,
should an appropriate kick-the-jiffies-counter API appear.

Located-by: Anton Blanchard <anton@au1.ibm.com>
Tested-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: anton@samba.org
Cc: akpm@linux-foundation.org
Cc: dipankar@in.ibm.com
Cc: manfred@colorfullife.com
Cc: cl@linux-foundation.org
Cc: josht@linux.vnet.ibm.com
Cc: schamp@sgi.com
Cc: niv@us.ibm.com
Cc: dvhltc@us.ibm.com
Cc: ego@in.ibm.com
Cc: laijs@cn.fujitsu.com
Cc: rostedt@goodmis.org
Cc: peterz@infradead.org
Cc: penberg@cs.helsinki.fi
Cc: andi@firstfloor.org
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
LKML-Reference: <12396834793575-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/rcutree.h |  3 +--
 kernel/rcutree.c        | 19 ++++---------------
 kernel/rcutree_trace.c  | 14 +++++---------
 3 files changed, 10 insertions(+), 26 deletions(-)

diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 0cdda00f2b2..58b2aa5312b 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -161,9 +161,8 @@ struct rcu_data {
 	unsigned long offline_fqs;	/* Kicked due to being offline. */
 	unsigned long resched_ipi;	/* Sent a resched IPI. */
 
-	/* 5) state to allow this CPU to force_quiescent_state on others */
+	/* 5) For future __rcu_pending statistics. */
 	long n_rcu_pending;		/* rcu_pending() calls since boot. */
-	long n_rcu_pending_force_qs;	/* when to force quiescent states. */
 
 	int cpu;
 };
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7f326692257..d2a372fb0b9 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -530,8 +530,6 @@ static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp)
 	rdp->qs_pending = 1;
 	rdp->passed_quiesc = 0;
 	rdp->gpnum = rsp->gpnum;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 }
 
 /*
@@ -578,8 +576,6 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 	rsp->gpnum++;
 	rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 	record_gp_stall_check_time(rsp);
 	dyntick_record_completed(rsp, rsp->completed - 1);
 	note_new_gpnum(rsp, rdp);
@@ -1055,7 +1051,6 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed)
 {
 	unsigned long flags;
 	long lastcomp;
-	struct rcu_data *rdp = rsp->rda[smp_processor_id()];
 	struct rcu_node *rnp = rcu_get_root(rsp);
 	u8 signaled;
 
@@ -1066,16 +1061,13 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed)
 		return;	/* Someone else is already on the job. */
 	}
 	if (relaxed &&
-	    (long)(rsp->jiffies_force_qs - jiffies) >= 0 &&
-	    (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0)
+	    (long)(rsp->jiffies_force_qs - jiffies) >= 0)
 		goto unlock_ret; /* no emergency and done recently. */
 	rsp->n_force_qs++;
 	spin_lock(&rnp->lock);
 	lastcomp = rsp->completed;
 	signaled = rsp->signaled;
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 	if (lastcomp == rsp->gpnum) {
 		rsp->n_force_qs_ngp++;
 		spin_unlock(&rnp->lock);
@@ -1144,8 +1136,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 	 * If an RCU GP has gone long enough, go check for dyntick
 	 * idle CPUs and, if needed, send resched IPIs.
 	 */
-	if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-	    (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+	if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 
 	/*
@@ -1230,8 +1221,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	if (unlikely(++rdp->qlen > qhimark)) {
 		rdp->blimit = LONG_MAX;
 		force_quiescent_state(rsp, 0);
-	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-		   (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 	local_irq_restore(flags);
 }
@@ -1290,8 +1280,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 
 	/* Has an RCU GP gone long enough to send resched IPIs &c? */
 	if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
-	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-	     (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0))
+	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
 		return 1;
 
 	/* nothing to do */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 4ee954f6a8d..4b1875ba940 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -49,14 +49,12 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
 {
 	if (!rdp->beenonline)
 		return;
-	seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x",
+	seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d",
 		   rdp->cpu,
 		   cpu_is_offline(rdp->cpu) ? '!' : ' ',
 		   rdp->completed, rdp->gpnum,
 		   rdp->passed_quiesc, rdp->passed_quiesc_completed,
-		   rdp->qs_pending,
-		   rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
-		   (int)(rdp->n_rcu_pending & 0xffff));
+		   rdp->qs_pending);
 #ifdef CONFIG_NO_HZ
 	seq_printf(m, " dt=%d/%d dn=%d df=%lu",
 		   rdp->dynticks->dynticks,
@@ -102,14 +100,12 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp)
 {
 	if (!rdp->beenonline)
 		return;
-	seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld",
+	seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
 		   rdp->cpu,
 		   cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
 		   rdp->completed, rdp->gpnum,
 		   rdp->passed_quiesc, rdp->passed_quiesc_completed,
-		   rdp->qs_pending,
-		   rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
-		   rdp->n_rcu_pending);
+		   rdp->qs_pending);
 #ifdef CONFIG_NO_HZ
 	seq_printf(m, ",%d,%d,%d,%lu",
 		   rdp->dynticks->dynticks,
@@ -123,7 +119,7 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp)
 
 static int show_rcudata_csv(struct seq_file *m, void *unused)
 {
-	seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\",");
+	seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",");
 #ifdef CONFIG_NO_HZ
 	seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
 #endif /* #ifdef CONFIG_NO_HZ */
-- 
GitLab


From 0a8c791437db4937bd160570f594d0286d3dd78d Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 14 Apr 2009 11:38:57 +0200
Subject: [PATCH 0174/1421] microblaze: Add missing FILE tag to MAINTAINERS

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index ca2997a4576..782ea4f0ca2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3680,6 +3680,7 @@ L:	microblaze-uclinux@itee.uq.edu.au
 W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
 S:	Supported
+F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
 P:	Oliver Neukum
-- 
GitLab


From 6cececfcece2b072d29886ed7140495f3af17153 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Tue, 14 Apr 2009 14:03:43 +0530
Subject: [PATCH 0175/1421] x86, documentation: kernel-parameters replace
 X86-32,X86-64 with X86

X86 is same as X86-32+X86-64 so replace X86-32,X86-64 with X86.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1239698023.3033.37.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 Documentation/kernel-parameters.txt | 40 ++++++++++++++---------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6172e4360f6..a19f021f081 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-	acpi=		[HW,ACPI,X86-64,i386]
+	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
 			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_osi="!string2"	# remove built-in string2
 			acpi_osi=		# disable all strings
 
-	acpi_pm_good	[X86-32,X86-64]
+	acpi_pm_good	[X86]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
@@ -459,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
-	code_bytes	[IA32/X86_64] How many bytes of object code to print
+	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
 			Default: 64
@@ -592,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [i386,x86-64]
+	disable_timer_pin_1 [X86]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -624,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=dbgp
@@ -659,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
-	elfcorehdr=	[IA64,PPC,SH,X86-32,X86_64]
+	elfcorehdr=	[IA64,PPC,SH,X86]
 			Specifies physical address of start of kernel core
 			image elf header. Generally kexec loader will
 			pass this option to capture kernel.
@@ -938,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86-32,X86-64] I/O delay method
+	io_delay=	[X86] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -1000,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	keepinitrd	[HW,ARM]
 
-	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
 			spread evenly throughout all nodes in the system. The
@@ -1034,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
+	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
@@ -1044,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -1229,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
 
-	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
+	memmap=exactmap	[KNL,X86] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	movablecore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			is similar to kernelcore except it specifies the
 			amount of memory used for migratable allocations.
 			If both kernelcore and movablecore is specified,
@@ -1422,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
 			Format: [panic,][num]
 			Valid num: 0,1,2
 			0 - turn nmi_watchdog off
@@ -1475,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		[X86-32,X86-64] Disable EFI runtime services support.
+	noefi		[X86] Disable EFI runtime services support.
 
 	noexec		[IA-64]
 
-	noexec		[X86-32,X86-64]
+	noexec		[X86]
 			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
@@ -1525,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
-	no_timer_check	[X86-32,X86_64,APIC] Disables the code which tests for
+	no_timer_check	[X86,APIC] Disables the code which tests for
 			broken timer IRQ sources.
 
 	noisapnp	[ISAPNP] Disables ISA PnP code.
@@ -1689,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file
 				disable the use of PCIE advanced error reporting.
 		nodomains	[PCI] Disable support for multiple PCI
 				root domains (aka PCI segments, in ACPI-speak).
-		nommconf	[X86-32,X86_64] Disable use of MMCONFIG for PCI
+		nommconf	[X86] Disable use of MMCONFIG for PCI
 				Configuration
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
@@ -2380,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			reported either.
 
 	unknown_nmi_panic
-			[X86-32,X86-64]
+			[X86]
 			Set unknown_nmi_panic=1 early on boot.
 
 	usbcore.autosuspend=
@@ -2447,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	vdso=		[X86-32,SH,x86-64]
+	vdso=		[X86,SH]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
-	vdso32=		[X86-32,X86-64]
+	vdso32=		[X86]
 			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso32=1: enable 32-bit VDSO (default)
 			vdso32=0: disable 32-bit VDSO mapping
-- 
GitLab


From ef44a1ec6eeef189998f84e7230e1d3535b01074 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 10 Apr 2009 09:43:08 +0800
Subject: [PATCH 0176/1421] ALSA: sound/core: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/control.c        | 35 ++++++--------
 sound/core/pcm_compat.c     | 11 ++---
 sound/core/pcm_native.c     | 93 ++++++++++++++-----------------------
 sound/core/seq/seq_compat.c |  9 ++--
 sound/core/timer.c          | 11 ++---
 5 files changed, 60 insertions(+), 99 deletions(-)

diff --git a/sound/core/control.c b/sound/core/control.c
index 4b20fa2b7e6..17b8d47a5cd 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -723,14 +723,11 @@ static int snd_ctl_elem_read_user(struct snd_card *card,
 {
 	struct snd_ctl_elem_value *control;
 	int result;
-	
-	control = kmalloc(sizeof(*control), GFP_KERNEL);
-	if (control == NULL)
-		return -ENOMEM;	
-	if (copy_from_user(control, _control, sizeof(*control))) {
-		kfree(control);
-		return -EFAULT;
-	}
+
+	control = memdup_user(_control, sizeof(*control));
+	if (IS_ERR(control))
+		return PTR_ERR(control);
+
 	snd_power_lock(card);
 	result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
 	if (result >= 0)
@@ -784,13 +781,10 @@ static int snd_ctl_elem_write_user(struct snd_ctl_file *file,
 	struct snd_card *card;
 	int result;
 
-	control = kmalloc(sizeof(*control), GFP_KERNEL);
-	if (control == NULL)
-		return -ENOMEM;	
-	if (copy_from_user(control, _control, sizeof(*control))) {
-		kfree(control);
-		return -EFAULT;
-	}
+	control = memdup_user(_control, sizeof(*control));
+	if (IS_ERR(control))
+		return PTR_ERR(control);
+
 	card = file->card;
 	snd_power_lock(card);
 	result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
@@ -916,13 +910,10 @@ static int snd_ctl_elem_user_tlv(struct snd_kcontrol *kcontrol,
 	if (op_flag > 0) {
 		if (size > 1024 * 128)	/* sane value */
 			return -EINVAL;
-		new_data = kmalloc(size, GFP_KERNEL);
-		if (new_data == NULL)
-			return -ENOMEM;
-		if (copy_from_user(new_data, tlv, size)) {
-			kfree(new_data);
-			return -EFAULT;
-		}
+
+		new_data = memdup_user(tlv, size);
+		if (IS_ERR(new_data))
+			return PTR_ERR(new_data);
 		change = ue->tlv_data_size != size;
 		if (!change)
 			change = memcmp(ue->tlv_data, new_data, size);
diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c
index 36d7a599823..08bfed594a8 100644
--- a/sound/core/pcm_compat.c
+++ b/sound/core/pcm_compat.c
@@ -232,14 +232,11 @@ static int snd_pcm_ioctl_hw_params_compat(struct snd_pcm_substream *substream,
 	if (! (runtime = substream->runtime))
 		return -ENOTTY;
 
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
-	if (data == NULL)
-		return -ENOMEM;
 	/* only fifo_size is different, so just copy all */
-	if (copy_from_user(data, data32, sizeof(*data32))) {
-		err = -EFAULT;
-		goto error;
-	}
+	data = memdup_user(data32, sizeof(*data32));
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
 	if (refine)
 		err = snd_pcm_hw_refine(substream, data);
 	else
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index a151fb01ba8..fc6f98e257d 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -327,21 +327,16 @@ static int snd_pcm_hw_refine_user(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params;
 	int err;
 
-	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(params, _params, sizeof(*params))) {
-		err = -EFAULT;
-		goto out;
-	}
+	params = memdup_user(_params, sizeof(*params));
+	if (IS_ERR(params))
+		return PTR_ERR(params);
+
 	err = snd_pcm_hw_refine(substream, params);
 	if (copy_to_user(_params, params, sizeof(*params))) {
 		if (!err)
 			err = -EFAULT;
 	}
-out:
+
 	kfree(params);
 	return err;
 }
@@ -465,21 +460,16 @@ static int snd_pcm_hw_params_user(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params;
 	int err;
 
-	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(params, _params, sizeof(*params))) {
-		err = -EFAULT;
-		goto out;
-	}
+	params = memdup_user(_params, sizeof(*params));
+	if (IS_ERR(params))
+		return PTR_ERR(params);
+
 	err = snd_pcm_hw_params(substream, params);
 	if (copy_to_user(_params, params, sizeof(*params))) {
 		if (!err)
 			err = -EFAULT;
 	}
-out:
+
 	kfree(params);
 	return err;
 }
@@ -2593,13 +2583,11 @@ static int snd_pcm_playback_ioctl1(struct file *file,
 			return -EFAULT;
 		if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
 			return -EFAULT;
-		bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
-		if (bufs == NULL)
-			return -ENOMEM;
-		if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
-			kfree(bufs);
-			return -EFAULT;
-		}
+
+		bufs = memdup_user(xfern.bufs,
+				   sizeof(void *) * runtime->channels);
+		if (IS_ERR(bufs))
+			return PTR_ERR(bufs);
 		result = snd_pcm_lib_writev(substream, bufs, xfern.frames);
 		kfree(bufs);
 		__put_user(result, &_xfern->result);
@@ -2675,13 +2663,11 @@ static int snd_pcm_capture_ioctl1(struct file *file,
 			return -EFAULT;
 		if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
 			return -EFAULT;
-		bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
-		if (bufs == NULL)
-			return -ENOMEM;
-		if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
-			kfree(bufs);
-			return -EFAULT;
-		}
+
+		bufs = memdup_user(xfern.bufs,
+				   sizeof(void *) * runtime->channels);
+		if (IS_ERR(bufs))
+			return PTR_ERR(bufs);
 		result = snd_pcm_lib_readv(substream, bufs, xfern.frames);
 		kfree(bufs);
 		__put_user(result, &_xfern->result);
@@ -3312,18 +3298,12 @@ static int snd_pcm_hw_refine_old_user(struct snd_pcm_substream *substream,
 	int err;
 
 	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
-	if (!oparams) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!params)
+		return -ENOMEM;
 
-	if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
-		err = -EFAULT;
+	oparams = memdup_user(_oparams, sizeof(*oparams));
+	if (IS_ERR(oparams)) {
+		err = PTR_ERR(oparams);
 		goto out;
 	}
 	snd_pcm_hw_convert_from_old_params(params, oparams);
@@ -3333,9 +3313,10 @@ static int snd_pcm_hw_refine_old_user(struct snd_pcm_substream *substream,
 		if (!err)
 			err = -EFAULT;
 	}
+
+	kfree(oparams);
 out:
 	kfree(params);
-	kfree(oparams);
 	return err;
 }
 
@@ -3347,17 +3328,12 @@ static int snd_pcm_hw_params_old_user(struct snd_pcm_substream *substream,
 	int err;
 
 	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
-	if (!oparams) {
-		err = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
-		err = -EFAULT;
+	if (!params)
+		return -ENOMEM;
+
+	oparams = memdup_user(_oparams, sizeof(*oparams));
+	if (IS_ERR(oparams)) {
+		err = PTR_ERR(oparams);
 		goto out;
 	}
 	snd_pcm_hw_convert_from_old_params(params, oparams);
@@ -3367,9 +3343,10 @@ static int snd_pcm_hw_params_old_user(struct snd_pcm_substream *substream,
 		if (!err)
 			err = -EFAULT;
 	}
+
+	kfree(oparams);
 out:
 	kfree(params);
-	kfree(oparams);
 	return err;
 }
 #endif /* CONFIG_SND_SUPPORT_OLD_API */
diff --git a/sound/core/seq/seq_compat.c b/sound/core/seq/seq_compat.c
index 38693f47c26..c956fe46256 100644
--- a/sound/core/seq/seq_compat.c
+++ b/sound/core/seq/seq_compat.c
@@ -48,12 +48,11 @@ static int snd_seq_call_port_info_ioctl(struct snd_seq_client *client, unsigned
 	struct snd_seq_port_info *data;
 	mm_segment_t fs;
 
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
-	if (! data)
-		return -ENOMEM;
+	data = memdup_user(data32, sizeof(*data32));
+	if (IS_ERR(data))
+		return PTR_ERR(data);
 
-	if (copy_from_user(data, data32, sizeof(*data32)) ||
-	    get_user(data->flags, &data32->flags) ||
+	if (get_user(data->flags, &data32->flags) ||
 	    get_user(data->time_queue, &data32->time_queue))
 		goto error;
 	data->kernel = NULL;
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 3f0050d0b71..8f8b17ac074 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -1395,13 +1395,10 @@ static int snd_timer_user_ginfo(struct file *file,
 	struct list_head *p;
 	int err = 0;
 
-	ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL);
-	if (! ginfo)
-		return -ENOMEM;
-	if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) {
-		kfree(ginfo);
-		return -EFAULT;
-	}
+	ginfo = memdup_user(_ginfo, sizeof(*ginfo));
+	if (IS_ERR(ginfo))
+		return PTR_ERR(ginfo);
+
 	tid = ginfo->tid;
 	memset(ginfo, 0, sizeof(*ginfo));
 	ginfo->tid = tid;
-- 
GitLab


From 68425adcc419bfe90776f59e66b8c4cdb6e1b1f3 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 10 Apr 2009 09:43:36 +0800
Subject: [PATCH 0177/1421] ALSA: sound/isa: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/isa/sb/sb16_csp.c               | 19 ++++++++++---------
 sound/isa/wavefront/wavefront_fx.c    | 14 +++++---------
 sound/isa/wavefront/wavefront_synth.c | 11 +++++------
 3 files changed, 20 insertions(+), 24 deletions(-)

diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 49037d074c7..bdc8dde4e4a 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -684,15 +684,16 @@ static int snd_sb_csp_load(struct snd_sb_csp * p, const unsigned char *buf, int
  
 static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags)
 {
-	int err = -ENOMEM;
-	unsigned char *kbuf = kmalloc(size, GFP_KERNEL);
-	if (kbuf) {
-		if (copy_from_user(kbuf, buf, size))
-			err = -EFAULT;
-		else
-			err = snd_sb_csp_load(p, kbuf, size, load_flags);
-		kfree(kbuf);
-	}
+	int err;
+	unsigned char *kbuf;
+
+	kbuf = memdup_user(buf, size);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	err = snd_sb_csp_load(p, kbuf, size, load_flags);
+
+	kfree(kbuf);
 	return err;
 }
 
diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index dfc449a2194..5e6870baa29 100644
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -210,15 +210,11 @@ snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file,
 					    "> 512 bytes to FX\n");
 				return -EIO;
 			}
-			page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL);
-			if (!page_data)
-				return -ENOMEM;
-			if (copy_from_user (page_data,
-					    (unsigned char __user *) r.data[3],
-					    r.data[2] * sizeof(short))) {
-				kfree(page_data);
-				return -EFAULT;
-			}
+			page_data = memdup_user((unsigned char __user *)
+						r.data[3],
+						r.data[2] * sizeof(short));
+			if (IS_ERR(page_data))
+				return PTR_ERR(page_data);
 			pd = page_data;
 		}
 
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index beb312cca75..5d4ff48c434 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -1664,12 +1664,11 @@ snd_wavefront_synth_ioctl (struct snd_hwdep *hw, struct file *file,
 		break;
 
 	case WFCTL_WFCMD:
-		wc = kmalloc(sizeof(*wc), GFP_KERNEL);
-		if (! wc)
-			return -ENOMEM;
-		if (copy_from_user (wc, argp, sizeof (*wc)))
-			err = -EFAULT;
-		else if (wavefront_synth_control (acard, wc) < 0)
+		wc = memdup_user(argp, sizeof(*wc));
+		if (IS_ERR(wc))
+			return PTR_ERR(wc);
+
+		if (wavefront_synth_control (acard, wc) < 0)
 			err = -EIO;
 		else if (copy_to_user (argp, wc, sizeof (*wc)))
 			err = -EFAULT;
-- 
GitLab


From 85385c1551d509e9e377b7be07ea0e755fb2c3ce Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 10 Apr 2009 09:43:59 +0800
Subject: [PATCH 0178/1421] ALSA: sound/usb: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/usx2y/us122l.c     | 10 +++-------
 sound/usb/usx2y/usX2Yhwdep.c | 13 ++++++-------
 2 files changed, 9 insertions(+), 14 deletions(-)

diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 98276aafefe..012ff1f6f8a 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -349,14 +349,10 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file,
 	if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS)
 		return -ENOTTY;
 
-	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
-	if (!cfg)
-		return -ENOMEM;
+	cfg = memdup_user((void *)arg, sizeof(*cfg));
+	if (IS_ERR(cfg))
+		return PTR_ERR(cfg);
 
-	if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) {
-		err = -EFAULT;
-		goto free;
-	}
 	if (cfg->version != USB_STREAM_INTERFACE_VERSION) {
 		err = -ENXIO;
 		goto free;
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 4af8740db71..f3d8f71265d 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -203,13 +203,12 @@ static int snd_usX2Y_hwdep_dsp_load(struct snd_hwdep *hw,
 
 	if (access_ok(VERIFY_READ, dsp->image, dsp->length)) {
 		struct usb_device* dev = priv->chip.dev;
-		char *buf = kmalloc(dsp->length, GFP_KERNEL);
-		if (!buf)
-			return -ENOMEM;
-		if (copy_from_user(buf, dsp->image, dsp->length)) {
-			kfree(buf);
-			return -EFAULT;
-		}
+		char *buf;
+
+		buf = memdup_user(dsp->image, dsp->length);
+		if (IS_ERR(buf))
+			return PTR_ERR(buf);
+
 		err = usb_set_interface(dev, 0, 1);
 		if (err)
 			snd_printk(KERN_ERR "usb_set_interface error \n");
-- 
GitLab


From 336500f0305dc1552e8d01a60b409a7db781ca28 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 10 Apr 2009 09:44:31 +0800
Subject: [PATCH 0179/1421] ALSA: sound/pci: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/emu10k1/emufx.c | 41 +++++++++++++--------------------------
 1 file changed, 13 insertions(+), 28 deletions(-)

diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c
index 191e1cd9997..4b302d86f5f 100644
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -2493,24 +2493,17 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un
 	case SNDRV_EMU10K1_IOCTL_CODE_POKE:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		icode = kmalloc(sizeof(*icode), GFP_KERNEL);
-		if (icode == NULL)
-			return -ENOMEM;
-		if (copy_from_user(icode, argp, sizeof(*icode))) {
-			kfree(icode);
-			return -EFAULT;
-		}
+
+		icode = memdup_user(argp, sizeof(*icode));
+		if (IS_ERR(icode))
+			return PTR_ERR(icode);
 		res = snd_emu10k1_icode_poke(emu, icode);
 		kfree(icode);
 		return res;
 	case SNDRV_EMU10K1_IOCTL_CODE_PEEK:
-		icode = kmalloc(sizeof(*icode), GFP_KERNEL);
-		if (icode == NULL)
-			return -ENOMEM;
-		if (copy_from_user(icode, argp, sizeof(*icode))) {
-			kfree(icode);
-			return -EFAULT;
-		}
+		icode = memdup_user(argp, sizeof(*icode));
+		if (IS_ERR(icode))
+			return PTR_ERR(icode);
 		res = snd_emu10k1_icode_peek(emu, icode);
 		if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) {
 			kfree(icode);
@@ -2519,24 +2512,16 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un
 		kfree(icode);
 		return res;
 	case SNDRV_EMU10K1_IOCTL_PCM_POKE:
-		ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL);
-		if (ipcm == NULL)
-			return -ENOMEM;
-		if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
-			kfree(ipcm);
-			return -EFAULT;
-		}
+		ipcm = memdup_user(argp, sizeof(*ipcm));
+		if (IS_ERR(ipcm))
+			return PTR_ERR(ipcm);
 		res = snd_emu10k1_ipcm_poke(emu, ipcm);
 		kfree(ipcm);
 		return res;
 	case SNDRV_EMU10K1_IOCTL_PCM_PEEK:
-		ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL);
-		if (ipcm == NULL)
-			return -ENOMEM;
-		if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
-			kfree(ipcm);
-			return -EFAULT;
-		}
+		ipcm = memdup_user(argp, sizeof(*ipcm));
+		if (IS_ERR(ipcm))
+			return PTR_ERR(ipcm);
 		res = snd_emu10k1_ipcm_peek(emu, ipcm);
 		if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) {
 			kfree(ipcm);
-- 
GitLab


From e431cf45687d1ccb7c7d818defc2af34bd783db2 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Sat, 28 Mar 2009 21:19:49 +0100
Subject: [PATCH 0180/1421] ALSA: snd-usb-caiaq: clean up header includes

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/caiaq/caiaq-audio.c   |  8 +-------
 sound/usb/caiaq/caiaq-control.c |  6 +-----
 sound/usb/caiaq/caiaq-device.c  | 13 +++----------
 sound/usb/caiaq/caiaq-input.c   |  6 ------
 sound/usb/caiaq/caiaq-midi.c    |  9 +--------
 5 files changed, 6 insertions(+), 36 deletions(-)

diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c
index 08d51e0c9fe..cf373311086 100644
--- a/sound/usb/caiaq/caiaq-audio.c
+++ b/sound/usb/caiaq/caiaq-audio.c
@@ -16,17 +16,11 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
 
+#include <linux/spinlock.h>
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
 #include <linux/usb.h>
-#include <linux/spinlock.h>
 #include <sound/core.h>
-#include <sound/initval.h>
 #include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <linux/input.h>
 
 #include "caiaq-device.h"
 #include "caiaq-audio.h"
diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/caiaq-control.c
index e92c2bbf4fe..bb21fcf0726 100644
--- a/sound/usb/caiaq/caiaq-control.c
+++ b/sound/usb/caiaq/caiaq-control.c
@@ -18,14 +18,10 @@
  */
 
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <sound/control.h>
 #include <sound/core.h>
-#include <sound/initval.h>
 #include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
-#include <linux/input.h>
 
 #include "caiaq-device.h"
 #include "caiaq-control.h"
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
index cf573a982fd..89f8b68058e 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -19,27 +19,20 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
 
-#include <linux/init.h>
-#include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
 #include <sound/initval.h>
+#include <sound/core.h>
 #include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
 
 #include "caiaq-device.h"
 #include "caiaq-audio.h"
 #include "caiaq-midi.h"
 #include "caiaq-control.h"
-
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
 #include "caiaq-input.h"
-#endif
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/caiaq-input.c
index f743847a5e5..4451775f82e 100644
--- a/sound/usb/caiaq/caiaq-input.c
+++ b/sound/usb/caiaq/caiaq-input.c
@@ -17,14 +17,8 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/rawmidi.h>
 #include <sound/pcm.h>
 #include "caiaq-device.h"
 #include "caiaq-input.h"
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/caiaq-midi.c
index f19fd360c93..79424c19891 100644
--- a/sound/usb/caiaq/caiaq-midi.c
+++ b/sound/usb/caiaq/caiaq-midi.c
@@ -16,21 +16,14 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
 #include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
 #include <sound/rawmidi.h>
+#include <sound/core.h>
 #include <sound/pcm.h>
 
 #include "caiaq-device.h"
 #include "caiaq-midi.h"
 
-
 static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
 {
 	return 0;
-- 
GitLab


From 936e7d03394bc6238091db10d060326622c87ed7 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 1 Apr 2009 19:05:39 +0200
Subject: [PATCH 0181/1421] ALSA: snd-usb-caiaq: rename files to remove
 redundant information in file pathes

Cleanup only, no functional change.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/caiaq/Makefile                       |  4 ++--
 sound/usb/caiaq/{caiaq-audio.c => audio.c}     |  4 ++--
 sound/usb/caiaq/{caiaq-audio.h => audio.h}     |  0
 sound/usb/caiaq/{caiaq-control.c => control.c} |  4 ++--
 sound/usb/caiaq/{caiaq-control.h => control.h} |  0
 sound/usb/caiaq/{caiaq-device.c => device.c}   | 10 +++++-----
 sound/usb/caiaq/{caiaq-device.h => device.h}   |  0
 sound/usb/caiaq/{caiaq-input.c => input.c}     |  5 +++--
 sound/usb/caiaq/{caiaq-input.h => input.h}     |  0
 sound/usb/caiaq/{caiaq-midi.c => midi.c}       |  4 ++--
 sound/usb/caiaq/{caiaq-midi.h => midi.h}       |  0
 11 files changed, 16 insertions(+), 15 deletions(-)
 rename sound/usb/caiaq/{caiaq-audio.c => audio.c} (99%)
 rename sound/usb/caiaq/{caiaq-audio.h => audio.h} (100%)
 rename sound/usb/caiaq/{caiaq-control.c => control.c} (99%)
 rename sound/usb/caiaq/{caiaq-control.h => control.h} (100%)
 rename sound/usb/caiaq/{caiaq-device.c => device.c} (99%)
 rename sound/usb/caiaq/{caiaq-device.h => device.h} (100%)
 rename sound/usb/caiaq/{caiaq-input.c => input.c} (99%)
 rename sound/usb/caiaq/{caiaq-input.h => input.h} (100%)
 rename sound/usb/caiaq/{caiaq-midi.c => midi.c} (98%)
 rename sound/usb/caiaq/{caiaq-midi.h => midi.h} (100%)

diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile
index 23dadd5a11c..388999653aa 100644
--- a/sound/usb/caiaq/Makefile
+++ b/sound/usb/caiaq/Makefile
@@ -1,4 +1,4 @@
-snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o
-snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o
+snd-usb-caiaq-y := device.o audio.o midi.o control.o
+snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o
 
 obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/audio.c
similarity index 99%
rename from sound/usb/caiaq/caiaq-audio.c
rename to sound/usb/caiaq/audio.c
index cf373311086..3f45c0fe61a 100644
--- a/sound/usb/caiaq/caiaq-audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -22,8 +22,8 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
+#include "device.h"
+#include "audio.h"
 
 #define N_URBS			32
 #define CLOCK_DRIFT_TOLERANCE	5
diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/audio.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-audio.h
rename to sound/usb/caiaq/audio.h
diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/control.c
similarity index 99%
rename from sound/usb/caiaq/caiaq-control.c
rename to sound/usb/caiaq/control.c
index bb21fcf0726..537102ba6b9 100644
--- a/sound/usb/caiaq/caiaq-control.c
+++ b/sound/usb/caiaq/control.c
@@ -23,8 +23,8 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
-#include "caiaq-device.h"
-#include "caiaq-control.h"
+#include "device.h"
+#include "control.h"
 
 #define CNT_INTVAL 0x10000
 
diff --git a/sound/usb/caiaq/caiaq-control.h b/sound/usb/caiaq/control.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-control.h
rename to sound/usb/caiaq/control.h
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/device.c
similarity index 99%
rename from sound/usb/caiaq/caiaq-device.c
rename to sound/usb/caiaq/device.c
index 89f8b68058e..6d517705da0 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/device.c
@@ -28,11 +28,11 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
-#include "caiaq-midi.h"
-#include "caiaq-control.h"
-#include "caiaq-input.h"
+#include "device.h"
+#include "audio.h"
+#include "midi.h"
+#include "control.h"
+#include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/device.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-device.h
rename to sound/usb/caiaq/device.h
diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/input.c
similarity index 99%
rename from sound/usb/caiaq/caiaq-input.c
rename to sound/usb/caiaq/input.c
index 4451775f82e..a48d309bd94 100644
--- a/sound/usb/caiaq/caiaq-input.c
+++ b/sound/usb/caiaq/input.c
@@ -20,8 +20,9 @@
 #include <linux/usb.h>
 #include <linux/usb/input.h>
 #include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-input.h"
+
+#include "device.h"
+#include "input.h"
 
 static unsigned short keycode_ak1[] =  { KEY_C, KEY_B, KEY_A };
 static unsigned short keycode_rk2[] =  { KEY_1, KEY_2, KEY_3, KEY_4,
diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/input.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-input.h
rename to sound/usb/caiaq/input.h
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/midi.c
similarity index 98%
rename from sound/usb/caiaq/caiaq-midi.c
rename to sound/usb/caiaq/midi.c
index 79424c19891..8fa8cd88d76 100644
--- a/sound/usb/caiaq/caiaq-midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -21,8 +21,8 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
-#include "caiaq-device.h"
-#include "caiaq-midi.h"
+#include "device.h"
+#include "midi.h"
 
 static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
 {
diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/midi.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-midi.h
rename to sound/usb/caiaq/midi.h
-- 
GitLab


From 6b82f3cb2d480b7714eb0ff61aee99c22160389e Mon Sep 17 00:00:00 2001
From: Chuck Ebbert <cebbert@redhat.com>
Date: Tue, 14 Apr 2009 07:37:40 -0400
Subject: [PATCH 0182/1421] ext4: really print the find_group_flex fallback
 warning only once

Missing braces caused the warning to print more than once.

Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ialloc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 47b84e8df56..cbce5aa6b92 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -831,11 +831,12 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode)
 		ret2 = find_group_flex(sb, dir, &group);
 		if (ret2 == -1) {
 			ret2 = find_group_other(sb, dir, &group, mode);
-			if (ret2 == 0 && once)
+			if (ret2 == 0 && once) {
 				once = 0;
 				printk(KERN_NOTICE "ext4: find_group_flex "
 				       "failed, fallback succeeded dir %lu\n",
 				       dir->i_ino);
+			}
 		}
 		goto got_group;
 	}
-- 
GitLab


From 67c457a8c378a006a34d92f9bd3078a80a92f250 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Tue, 14 Apr 2009 07:50:56 -0400
Subject: [PATCH 0183/1421] jbd2: use SWRITE_SYNC_PLUG when writing synchronous
 revoke records

The revoke records must be written using the same way as the rest of
the blocks during the commit process; that is, either marked as
synchronous writes or as asynchornous writes.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/jbd2/commit.c     |  3 ++-
 fs/jbd2/revoke.c     | 21 ++++++++++++---------
 include/linux/jbd2.h |  3 ++-
 3 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 073c8c3df7c..0b7d3b8226f 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -506,7 +506,8 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	if (err)
 		jbd2_journal_abort(journal, err);
 
-	jbd2_journal_write_revoke_records(journal, commit_transaction);
+	jbd2_journal_write_revoke_records(journal, commit_transaction,
+					  write_op);
 
 	jbd_debug(3, "JBD: commit phase 2\n");
 
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index bbe6d592d8b..a360b06af2e 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -86,6 +86,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/bio.h>
 #endif
 #include <linux/log2.h>
 
@@ -118,8 +119,8 @@ struct jbd2_revoke_table_s
 #ifdef __KERNEL__
 static void write_one_revoke_record(journal_t *, transaction_t *,
 				    struct journal_head **, int *,
-				    struct jbd2_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+				    struct jbd2_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
 #endif
 
 /* Utility functions to maintain the revoke table */
@@ -499,7 +500,8 @@ void jbd2_journal_switch_revoke_table(journal_t *journal)
  * revoke hash, deleting the entries as we go.
  */
 void jbd2_journal_write_revoke_records(journal_t *journal,
-				  transaction_t *transaction)
+				       transaction_t *transaction,
+				       int write_op)
 {
 	struct journal_head *descriptor;
 	struct jbd2_revoke_record_s *record;
@@ -523,14 +525,14 @@ void jbd2_journal_write_revoke_records(journal_t *journal,
 				hash_list->next;
 			write_one_revoke_record(journal, transaction,
 						&descriptor, &offset,
-						record);
+						record, write_op);
 			count++;
 			list_del(&record->hash);
 			kmem_cache_free(jbd2_revoke_record_cache, record);
 		}
 	}
 	if (descriptor)
-		flush_descriptor(journal, descriptor, offset);
+		flush_descriptor(journal, descriptor, offset, write_op);
 	jbd_debug(1, "Wrote %d revoke records\n", count);
 }
 
@@ -543,7 +545,8 @@ static void write_one_revoke_record(journal_t *journal,
 				    transaction_t *transaction,
 				    struct journal_head **descriptorp,
 				    int *offsetp,
-				    struct jbd2_revoke_record_s *record)
+				    struct jbd2_revoke_record_s *record,
+				    int write_op)
 {
 	struct journal_head *descriptor;
 	int offset;
@@ -562,7 +565,7 @@ static void write_one_revoke_record(journal_t *journal,
 	/* Make sure we have a descriptor with space left for the record */
 	if (descriptor) {
 		if (offset == journal->j_blocksize) {
-			flush_descriptor(journal, descriptor, offset);
+			flush_descriptor(journal, descriptor, offset, write_op);
 			descriptor = NULL;
 		}
 	}
@@ -607,7 +610,7 @@ static void write_one_revoke_record(journal_t *journal,
 
 static void flush_descriptor(journal_t *journal,
 			     struct journal_head *descriptor,
-			     int offset)
+			     int offset, int write_op)
 {
 	jbd2_journal_revoke_header_t *header;
 	struct buffer_head *bh = jh2bh(descriptor);
@@ -622,7 +625,7 @@ static void flush_descriptor(journal_t *journal,
 	set_buffer_jwrite(bh);
 	BUFFER_TRACE(bh, "write");
 	set_buffer_dirty(bh);
-	ll_rw_block(SWRITE, 1, &bh);
+	ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
 }
 #endif
 
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 8815a3456b3..cc02393bfce 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1193,7 +1193,8 @@ extern int	   jbd2_journal_init_revoke_caches(void);
 extern void	   jbd2_journal_destroy_revoke(journal_t *);
 extern int	   jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
 extern int	   jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void	   jbd2_journal_write_revoke_records(journal_t *, transaction_t *);
+extern void	   jbd2_journal_write_revoke_records(journal_t *,
+						     transaction_t *, int);
 
 /* Recovery revoke support */
 extern int	jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
-- 
GitLab


From 6ec3cfeca04622e3d80c9270191cd7f5f88214af Mon Sep 17 00:00:00 2001
From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Date: Mon, 13 Apr 2009 15:20:58 -0700
Subject: [PATCH 0184/1421] x86, irq: Remove IRQ_DISABLED check in process
 context IRQ move

As discussed in the thread here:

  http://marc.info/?l=linux-kernel&m=123964468521142&w=2

Eric W. Biederman observed:

> It looks like some additional bugs have slipped in since last I looked.
>
> set_irq_affinity does this:
> ifdef CONFIG_GENERIC_PENDING_IRQ
>        if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
>                cpumask_copy(desc->affinity, cpumask);
>                desc->chip->set_affinity(irq, cpumask);
>        } else {
>                desc->status |= IRQ_MOVE_PENDING;
>                cpumask_copy(desc->pending_mask, cpumask);
>        }
> #else
>
> That IRQ_DISABLED case is a software state and as such it has nothing to
> do with how safe it is to move an irq in process context.

[...]

>
> The only reason we migrate MSIs in interrupt context today is that there
> wasn't infrastructure for support migration both in interrupt context
> and outside of it.

Yes. The idea here was to force the MSI migration to happen in process
context. One of the patches in the series did

        disable_irq(dev->irq);
        irq_set_affinity(dev->irq, cpumask_of(dev->cpu));
        enable_irq(dev->irq);

with the above patch adding irq/manage code check for interrupt disabled
and moving the interrupt in process context.

IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET
code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there
when we eventually submitted the patch upstream. But, looks like I did a
blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code.

Below patch fixes this. i.e., revert commit 932775a4ab622e3c99bd59f14cc
and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity
in generic code as set_affinity routines are doing it internally.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Li Shaohua" <shaohua.li@intel.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: "lcm@us.ibm.com" <lcm@us.ibm.com>
Cc: suresh.b.siddha@intel.com
LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 2 ++
 kernel/irq/manage.c            | 5 ++---
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index a2789e42e16..30da617d18e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3670,12 +3670,14 @@ int arch_setup_hpet_msi(unsigned int irq)
 {
 	int ret;
 	struct msi_msg msg;
+	struct irq_desc *desc = irq_to_desc(irq);
 
 	ret = msi_compose_msg(NULL, irq, &msg);
 	if (ret < 0)
 		return ret;
 
 	hpet_msi_write(irq, &msg);
+	desc->status |= IRQ_MOVE_PCNTXT;
 	set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
 		"edge");
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 7e2e7dd4cd2..2734eca5924 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -109,10 +109,9 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	spin_lock_irqsave(&desc->lock, flags);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-	if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
-		cpumask_copy(desc->affinity, cpumask);
+	if (desc->status & IRQ_MOVE_PCNTXT)
 		desc->chip->set_affinity(irq, cpumask);
-	} else {
+	else {
 		desc->status |= IRQ_MOVE_PENDING;
 		cpumask_copy(desc->pending_mask, cpumask);
 	}
-- 
GitLab


From 25097bf153391f7be4c591d47061b3dc4990dac2 Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Tue, 14 Apr 2009 15:36:16 +0200
Subject: [PATCH 0185/1421] [S390] s390: move machine flags to lowcore

Currently the storage of the machine flags is a globally exported unsigned
long long variable. By moving the storage location into the lowcore struct we
allow assembler code to check machine_flags directly even without needing a
register. Addtionally the lowcore and therefore the machine flags too will be
in cache most of the time.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/cpuid.h       | 25 +++++++++++++++++++++++++
 arch/s390/include/asm/kvm_host.h    |  1 +
 arch/s390/include/asm/lowcore.h     | 12 ++++++++----
 arch/s390/include/asm/processor.h   | 17 +++--------------
 arch/s390/include/asm/ptrace.h      |  2 --
 arch/s390/include/asm/setup.h       | 24 ++++++++++++------------
 arch/s390/include/asm/thread_info.h |  3 ++-
 arch/s390/kernel/early.c            |  3 +++
 arch/s390/kernel/setup.c            |  4 +---
 arch/s390/kernel/smp.c              |  1 +
 10 files changed, 56 insertions(+), 36 deletions(-)
 create mode 100644 arch/s390/include/asm/cpuid.h

diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h
new file mode 100644
index 00000000000..07836a2e522
--- /dev/null
+++ b/arch/s390/include/asm/cpuid.h
@@ -0,0 +1,25 @@
+/*
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		 Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+	unsigned int version :	8;
+	unsigned int ident   : 24;
+	unsigned int machine : 16;
+	unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index c6e674f5fca..54ea39f96ec 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -15,6 +15,7 @@
 #define ASM_KVM_HOST_H
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
+#include <asm/cpuid.h>
 
 #define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index b349f1c7fdf..3aeca492b14 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -66,6 +66,7 @@
 #define __LC_USER_EXEC_ASCE		0x02ac
 #define __LC_CPUID			0x02b0
 #define __LC_INT_CLOCK			0x02c8
+#define __LC_MACHINE_FLAGS		0x02d8
 #define __LC_IRB			0x0300
 #define __LC_PFAULT_INTPARM		0x0080
 #define __LC_CPU_TIMER_SAVE_AREA	0x00d8
@@ -110,6 +111,7 @@
 #define __LC_CPUID			0x0320
 #define __LC_INT_CLOCK			0x0340
 #define __LC_VDSO_PER_CPU		0x0350
+#define __LC_MACHINE_FLAGS		0x0358
 #define __LC_IRB			0x0380
 #define __LC_PASTE			0x03c0
 #define __LC_PFAULT_INTPARM		0x11b8
@@ -127,9 +129,9 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
 #include <linux/types.h>
-#include <asm/sigp.h>
 
 void restart_int_handler(void);
 void ext_int_handler(void);
@@ -277,7 +279,8 @@ struct _lowcore
 	__u32	ext_call_fast;			/* 0x02c4 */
 	__u64	int_clock;			/* 0x02c8 */
 	__u64	clock_comparator;		/* 0x02d0 */
-	__u8	pad_0x02d8[0x0300-0x02d8];	/* 0x02d8 */
+	__u32	machine_flags;			/* 0x02d8 */
+	__u8	pad_0x02dc[0x0300-0x02dc];	/* 0x02dc */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
@@ -381,7 +384,8 @@ struct _lowcore
 	__u64	int_clock;			/* 0x0340 */
 	__u64	clock_comparator;		/* 0x0348 */
 	__u64	vdso_per_cpu_data;		/* 0x0350 */
-	__u8	pad_0x0358[0x0380-0x0358];	/* 0x0358 */
+	__u64	machine_flags;			/* 0x0358 */
+	__u8	pad_0x0360[0x0380-0x0360];	/* 0x0360 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 61862b3ac79..c139fa7b8e8 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,7 +14,10 @@
 #define __ASM_S390_PROCESSOR_H
 
 #include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
 #include <asm/ptrace.h>
+#include <asm/setup.h>
 
 #ifdef __KERNEL__
 /*
@@ -23,20 +26,6 @@
  */
 #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
 
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-        unsigned int version :  8;
-        unsigned int ident   : 24;
-        unsigned int machine : 16;
-        unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
 static inline void get_cpu_id(cpuid_t *ptr)
 {
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index f1b051630c5..539263fc9ab 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -313,8 +313,6 @@ typedef struct
 
 
 #ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
 
 /*
  * The pt_regs struct defines the way the registers are stored on
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index e8bd6ac22c9..38b0fc221ed 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -14,6 +14,7 @@
 
 #ifdef __KERNEL__
 
+#include <asm/lowcore.h>
 #include <asm/types.h>
 
 #define PARMAREA		0x10400
@@ -63,7 +64,6 @@ extern unsigned int s390_noexec;
 /*
  * Machine features detected in head.S
  */
-extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM		(1UL << 0)
 #define MACHINE_FLAG_IEEE	(1UL << 1)
@@ -77,28 +77,28 @@ extern unsigned long machine_flags;
 #define MACHINE_FLAG_HPAGE	(1UL << 10)
 #define MACHINE_FLAG_PFMF	(1UL << 11)
 
-#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
+#define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
 
 #ifndef __s390x__
-#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IEEE	(S390_lowcore.machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP		(S390_lowcore.machine_flags & MACHINE_FLAG_CSP)
 #define MACHINE_HAS_IDTE	(0)
 #define MACHINE_HAS_DIAG44	(1)
-#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVPG	(S390_lowcore.machine_flags & MACHINE_FLAG_MVPG)
 #define MACHINE_HAS_MVCOS	(0)
 #define MACHINE_HAS_HPAGE	(0)
 #define MACHINE_HAS_PFMF	(0)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
-#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_IDTE	(S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
 #define MACHINE_HAS_MVPG	(1)
-#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_MVCOS	(S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE	(S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
 #endif /* __s390x__ */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index c544aa52453..461f2abd2e6 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -31,8 +31,9 @@
 #define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
 
 #ifndef __ASSEMBLY__
-#include <asm/processor.h>
 #include <asm/lowcore.h>
+#include <asm/page.h>
+#include <asm/processor.h>
 
 /*
  * low level task data that entry.S needs immediate access to
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 4d221c81c84..d4e1e5b6cfd 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -34,6 +34,8 @@
 
 char kernel_nss_name[NSS_NAME_SIZE + 1];
 
+static unsigned long machine_flags;
+
 static void __init setup_boot_command_line(void);
 
 
@@ -391,5 +393,6 @@ void __init startup_init(void)
 	setup_hpage();
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
+	S390_lowcore.machine_flags = machine_flags;
 	lockdep_on();
 }
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 06201b93cbb..163bdfe5a6b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -82,9 +82,6 @@ EXPORT_SYMBOL(console_devno);
 unsigned int console_irq = -1;
 EXPORT_SYMBOL(console_irq);
 
-unsigned long machine_flags;
-EXPORT_SYMBOL(machine_flags);
-
 unsigned long elf_hwcap = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
@@ -426,6 +423,7 @@ setup_lowcore(void)
 		__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
 	lc->current_task = (unsigned long) init_thread_union.thread_info.task;
 	lc->thread_info = (unsigned long) &init_thread_union;
+	lc->machine_flags = S390_lowcore.machine_flags;
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE) {
 		lc->extended_save_area_addr = (__u32)
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 006ed5016eb..79663024071 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -571,6 +571,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	cpu_lowcore->current_task = (unsigned long) idle;
 	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+	cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
 	eieio();
 
 	while (signal_processor(cpu, sigp_restart) == sigp_busy)
-- 
GitLab


From a93e11f9b9604134373ae790bce738d62109de60 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:17 +0200
Subject: [PATCH 0186/1421] [S390] wire up preadv/pwritev system calls

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/unistd.h    |  4 +++-
 arch/s390/kernel/compat_wrapper.S | 18 ++++++++++++++++++
 arch/s390/kernel/syscalls.S       |  2 ++
 3 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index c8ad350d144..f0f19e6ace6 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -265,7 +265,9 @@
 #define __NR_pipe2		325
 #define __NR_dup3		326
 #define __NR_epoll_create1	327
-#define NR_syscalls 328
+#define	__NR_preadv		328
+#define	__NR_pwritev		329
+#define NR_syscalls 330
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 87cf5a79a35..fb38af6316b 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1805,3 +1805,21 @@ compat_sys_keyctl_wrapper:
 	llgfr	%r5,%r5			# u32
 	llgfr	%r6,%r6			# u32
 	jg	compat_sys_keyctl	# branch to system call
+
+	.globl	compat_sys_preadv_wrapper
+compat_sys_preadv_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned long
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_preadv	# branch to system call
+
+	.globl	compat_sys_pwritev_wrapper
+compat_sys_pwritev_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned long
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_pwritev	# branch to system call
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index fe5b25a988a..2c7739fe70b 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -336,3 +336,5 @@ SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
 SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
 SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
 SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
+SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
+SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
-- 
GitLab


From 81f64b87731aa33eef6b88af9d92c3398d48cf41 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:18 +0200
Subject: [PATCH 0187/1421] [S390] call nmi_enter/nmi_exit on machine checks

nmi_enter/nmi_exit includes the lockdep calls and various
other calls which were missing so far.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/nmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 4bfdc421d7e..28cf196ba77 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -10,6 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <asm/lowcore.h>
@@ -253,7 +254,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs)
 	struct mci *mci;
 	int umode;
 
-	lockdep_off();
+	nmi_enter();
 	s390_idle_check();
 
 	mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
@@ -363,7 +364,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs)
 		mcck->warning = 1;
 		set_thread_flag(TIF_MCCK_PENDING);
 	}
-	lockdep_on();
+	nmi_exit();
 }
 
 static int __init machine_check_init(void)
-- 
GitLab


From 0436230148c55e3afbe5c57775a1fb44ba4834ac Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:19 +0200
Subject: [PATCH 0188/1421] [S390] stp synchronization retry timer

Add a timer that retries the clock synchronization via the server time
protocol if there is a usable clock but the synchronization failed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/time.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f72d41068dc..05f93e77870 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1423,6 +1423,7 @@ static void *stp_page;
 static void stp_work_fn(struct work_struct *work);
 static DEFINE_MUTEX(stp_work_mutex);
 static DECLARE_WORK(stp_work, stp_work_fn);
+static struct timer_list stp_timer;
 
 static int __init early_parse_stp(char *p)
 {
@@ -1454,10 +1455,16 @@ static void __init stp_reset(void)
 	}
 }
 
+static void stp_timeout(unsigned long dummy)
+{
+	queue_work(time_sync_wq, &stp_work);
+}
+
 static int __init stp_init(void)
 {
 	if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
 		return 0;
+	setup_timer(&stp_timer, stp_timeout, 0UL);
 	time_init_wq();
 	if (!stp_online)
 		return 0;
@@ -1565,6 +1572,7 @@ static void stp_work_fn(struct work_struct *work)
 
 	if (!stp_online) {
 		chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+		del_timer_sync(&stp_timer);
 		goto out_unlock;
 	}
 
@@ -1586,6 +1594,13 @@ static void stp_work_fn(struct work_struct *work)
 	stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
 	put_online_cpus();
 
+	if (!check_sync_clock())
+		/*
+		 * There is a usable clock but the synchonization failed.
+		 * Retry after a second.
+		 */
+		mod_timer(&stp_timer, jiffies + HZ);
+
 out_unlock:
 	mutex_unlock(&stp_work_mutex);
 }
-- 
GitLab


From b6ecfa9273e27b5c7ba04655eb44f78bf4db5b64 Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Tue, 14 Apr 2009 15:36:20 +0200
Subject: [PATCH 0189/1421] [S390] extend virtual timer interface by
 mod_virt_timer_periodic

In case mod_virt_timer is used to add a non pending timer the timer
is always added as a one-shot timer. If mod_virt_timer is used for
periodic timers they may therfore be degraded to one-shot timers.

Add mod_virt_timer_periodic to the interface to allow safe re-programming
of the interval value.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/timer.h |  1 +
 arch/s390/kernel/vtime.c      | 57 ++++++++++++++++++++---------------
 2 files changed, 34 insertions(+), 24 deletions(-)

diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h
index e4bcab739c1..814243cafdf 100644
--- a/arch/s390/include/asm/timer.h
+++ b/arch/s390/include/asm/timer.h
@@ -41,6 +41,7 @@ extern void init_virt_timer(struct vtimer_list *timer);
 extern void add_virt_timer(void *new);
 extern void add_virt_timer_periodic(void *new);
 extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires);
 extern int del_virt_timer(struct vtimer_list *timer);
 
 extern void init_cpu_vtimer(void);
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index ecf0304e61c..694b44374a2 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -425,17 +425,7 @@ void add_virt_timer_periodic(void *new)
 }
 EXPORT_SYMBOL(add_virt_timer_periodic);
 
-/*
- * If we change a pending timer the function must be called on the CPU
- * where the timer is running on, e.g. by smp_call_function_single()
- *
- * The original mod_timer adds the timer if it is not pending. For
- * compatibility we do the same. The timer will be added on the current
- * CPU as a oneshot timer.
- *
- * returns whether it has modified a pending timer (1) or not (0)
- */
-int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
 {
 	struct vtimer_queue *vq;
 	unsigned long flags;
@@ -444,39 +434,35 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 	BUG_ON(!timer->function);
 	BUG_ON(!expires || expires > VTIMER_MAX_SLICE);
 
-	/*
-	 * This is a common optimization triggered by the
-	 * networking code - if the timer is re-modified
-	 * to be the same thing then just return:
-	 */
 	if (timer->expires == expires && vtimer_pending(timer))
 		return 1;
 
 	cpu = get_cpu();
 	vq = &per_cpu(virt_cpu_timer, cpu);
 
-	/* check if we run on the right CPU */
-	BUG_ON(timer->cpu != cpu);
-
 	/* disable interrupts before test if timer is pending */
 	spin_lock_irqsave(&vq->lock, flags);
 
 	/* if timer isn't pending add it on the current CPU */
 	if (!vtimer_pending(timer)) {
 		spin_unlock_irqrestore(&vq->lock, flags);
-		/* we do not activate an interval timer with mod_virt_timer */
-		timer->interval = 0;
+
+		if (periodic)
+			timer->interval = expires;
+		else
+			timer->interval = 0;
 		timer->expires = expires;
 		timer->cpu = cpu;
 		internal_add_vtimer(timer);
 		return 0;
 	}
 
+	/* check if we run on the right CPU */
+	BUG_ON(timer->cpu != cpu);
+
 	list_del_init(&timer->entry);
 	timer->expires = expires;
-
-	/* also change the interval if we have an interval timer */
-	if (timer->interval)
+	if (periodic)
 		timer->interval = expires;
 
 	/* the timer can't expire anymore so we can release the lock */
@@ -484,8 +470,31 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
 	internal_add_vtimer(timer);
 	return 1;
 }
+
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+{
+	return __mod_vtimer(timer, expires, 0);
+}
 EXPORT_SYMBOL(mod_virt_timer);
 
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires)
+{
+	return __mod_vtimer(timer, expires, 1);
+}
+EXPORT_SYMBOL(mod_virt_timer_periodic);
+
 /*
  * delete a virtual timer
  *
-- 
GitLab


From 43ae8a1b32735c662ba7ebf3509c4f670f75e3d5 Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:21 +0200
Subject: [PATCH 0190/1421] [S390] appldata: Use new mod_virt_timer_periodic()
 function.

mod_virt_timer() was used to modify/add cpu timers for cpus that were
set online. This resulted in a one-shot timer for every cpu that was
newly added or previously set offline, instead of an interval timer,
which broke the appldata vtime interval setup.

To fix this, the new mod_virt_timer_periodic() function is used, which
adds interval timers instead of one-shot timers.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/appldata/appldata_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 27b70d8a359..aeb3cff95f6 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -176,7 +176,7 @@ static void __appldata_mod_vtimer_wrap(void *p) {
 		struct vtimer_list *timer;
 		u64    expires;
 	} *args = p;
-	mod_virt_timer(args->timer, args->expires);
+	mod_virt_timer_periodic(args->timer, args->expires);
 }
 
 #define APPLDATA_ADD_TIMER	0
-- 
GitLab


From 75cb71f3184f3dd5b78d991d5e0e047774865f5d Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Tue, 14 Apr 2009 15:36:22 +0200
Subject: [PATCH 0191/1421] [S390] qdio: remove dead timeout handler

The QDIO ccw devices are started by ccw_device_start so no timeout
can occur for the interrupt handler. Remove the dead code.

In case of an I/O error set the device state to error and wake up
a possibly running qdio_shutdown waiter.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/qdio_main.c | 43 ++----------------------------------
 1 file changed, 2 insertions(+), 41 deletions(-)

diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 9e8a2914259..accd957454e 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -881,42 +881,6 @@ no_handler:
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
 }
 
-static void qdio_call_shutdown(struct work_struct *work)
-{
-	struct ccw_device_private *priv;
-	struct ccw_device *cdev;
-
-	priv = container_of(work, struct ccw_device_private, kick_work);
-	cdev = priv->cdev;
-	qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
-	put_device(&cdev->dev);
-}
-
-static void qdio_int_error(struct ccw_device *cdev)
-{
-	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
-	switch (irq_ptr->state) {
-	case QDIO_IRQ_STATE_INACTIVE:
-	case QDIO_IRQ_STATE_CLEANUP:
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
-		break;
-	case QDIO_IRQ_STATE_ESTABLISHED:
-	case QDIO_IRQ_STATE_ACTIVE:
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
-		if (get_device(&cdev->dev)) {
-			/* Can't call shutdown from interrupt context. */
-			PREPARE_WORK(&cdev->private->kick_work,
-				     qdio_call_shutdown);
-			queue_work(ccw_device_work, &cdev->private->kick_work);
-		}
-		break;
-	default:
-		WARN_ON(1);
-	}
-	wake_up(&cdev->private->wait_q);
-}
-
 static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
 				       int dstat)
 {
@@ -973,10 +937,8 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		switch (PTR_ERR(irb)) {
 		case -EIO:
 			DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
-			return;
-		case -ETIMEDOUT:
-			DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no);
-			qdio_int_error(cdev);
+			qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+			wake_up(&cdev->private->wait_q);
 			return;
 		default:
 			WARN_ON(1);
@@ -1001,7 +963,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	case QDIO_IRQ_STATE_ACTIVE:
 		if (cstat & SCHN_STAT_PCI) {
 			qdio_int_handler_pci(irq_ptr);
-			/* no state change so no need to wake up wait_q */
 			return;
 		}
 		if ((cstat & ~SCHN_STAT_PCI) || dstat) {
-- 
GitLab


From f3445a1a656bc26b07946cc6d20de1ef07c8d116 Mon Sep 17 00:00:00 2001
From: Cornelia Huck <cornelia.huck@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:23 +0200
Subject: [PATCH 0192/1421] [S390] dasd: Use the new async framework for
 autoonlining.

The dasd driver can automatically online detected dasds, which
especially important for finding the root device. Currently,
it will wait for each online operation to finish individually,
which may take long if many dasds need to be onlined. When using
the new async framework, these onlining operations can run in
parallel and presence of the root device is ensured by the fact
that prepare_namespace() waits for all async threads to finish.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/block/dasd.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0570794ccf1..d1815272c43 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/buffer_head.h>
 #include <linux/hdreg.h>
+#include <linux/async.h>
 
 #include <asm/ccwdev.h>
 #include <asm/ebcdic.h>
@@ -480,8 +481,10 @@ static void dasd_change_state(struct dasd_device *device)
         if (rc && rc != -EAGAIN)
                 device->target = device->state;
 
-	if (device->state == device->target)
+	if (device->state == device->target) {
 		wake_up(&dasd_init_waitq);
+		dasd_put_device(device);
+	}
 
 	/* let user-space know that the device status changed */
 	kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE);
@@ -513,12 +516,15 @@ void dasd_kick_device(struct dasd_device *device)
  */
 void dasd_set_target_state(struct dasd_device *device, int target)
 {
+	dasd_get_device(device);
 	/* If we are in probeonly mode stop at DASD_STATE_READY. */
 	if (dasd_probeonly && target > DASD_STATE_READY)
 		target = DASD_STATE_READY;
 	if (device->target != target) {
-                if (device->state == target)
+		if (device->state == target) {
 			wake_up(&dasd_init_waitq);
+			dasd_put_device(device);
+		}
 		device->target = target;
 	}
 	if (device->state != device->target)
@@ -2148,6 +2154,22 @@ dasd_exit(void)
  * SECTION: common functions for ccw_driver use
  */
 
+static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
+{
+	struct ccw_device *cdev = data;
+	int ret;
+
+	ret = ccw_device_set_online(cdev);
+	if (ret)
+		pr_warning("%s: Setting the DASD online failed with rc=%d\n",
+			   dev_name(&cdev->dev), ret);
+	else {
+		struct dasd_device *device = dasd_device_from_cdev(cdev);
+		wait_event(dasd_init_waitq, _wait_for_device(device));
+		dasd_put_device(device);
+	}
+}
+
 /*
  * Initial attempt at a probe function. this can be simplified once
  * the other detection code is gone.
@@ -2180,10 +2202,7 @@ int dasd_generic_probe(struct ccw_device *cdev,
 	 */
 	if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
 	    (dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0))
-		ret = ccw_device_set_online(cdev);
-	if (ret)
-		pr_warning("%s: Setting the DASD online failed with rc=%d\n",
-		       dev_name(&cdev->dev), ret);
+		async_schedule(dasd_generic_auto_online, cdev);
 	return 0;
 }
 
@@ -2290,13 +2309,7 @@ int dasd_generic_set_online(struct ccw_device *cdev,
 	} else
 		pr_debug("dasd_generic device %s found\n",
 				dev_name(&cdev->dev));
-
-	/* FIXME: we have to wait for the root device but we don't want
-	 * to wait for each single device but for all at once. */
-	wait_event(dasd_init_waitq, _wait_for_device(device));
-
 	dasd_put_device(device);
-
 	return rc;
 }
 
-- 
GitLab


From 52db45c3c55a0fca53077dfd7b123e30cd210aad Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:24 +0200
Subject: [PATCH 0193/1421] [S390] dasd: fix idaw boundary checking for track
 based ccw

A ccw command that reads or writes several records at once will
usually transfer more data then fits into one page and needs to
address memory areas using a list of indirect data address words
(idaw). All but the first of these areas must start on a 4KB or 2KB
block boundary (depending on the idaw format).
A check for this restriction was missing and has been added with
this patch.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/block/dasd_eckd.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 21254793c60..cb52da033f0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2019,15 +2019,23 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track(
 				ccw++;
 				recid += count;
 				new_track = 0;
+				/* first idaw for a ccw may start anywhere */
+				if (!idaw_dst)
+					idaw_dst = dst;
 			}
-			/* If we start a new idaw, everything is fine and the
-			 * start of the new idaw is the start of this segment.
+			/* If we start a new idaw, we must make sure that it
+			 * starts on an IDA_BLOCK_SIZE boundary.
 			 * If we continue an idaw, we must make sure that the
 			 * current segment begins where the so far accumulated
 			 * idaw ends
 			 */
-			if (!idaw_dst)
-				idaw_dst = dst;
+			if (!idaw_dst) {
+				if (__pa(dst) & (IDA_BLOCK_SIZE-1)) {
+					dasd_sfree_request(cqr, startdev);
+					return ERR_PTR(-ERANGE);
+				} else
+					idaw_dst = dst;
+			}
 			if ((idaw_dst + idaw_len) != dst) {
 				dasd_sfree_request(cqr, startdev);
 				return ERR_PTR(-ERANGE);
-- 
GitLab


From 88e012856d05a5d00ae80c691fb7aa5adda268d7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:25 +0200
Subject: [PATCH 0194/1421] [S390] smp: fix cpu_possible_map initialization

The cpu_possible_map by default is initialized with all ones in s390.
If the kernel paramert possible_cpus=<x> is passed the cpu_possible_map
is supposed to have x bits set.
However the current code just sets the x bits without clearing the NR_CPUS
bits that were already set. So we end up with an unchanged map that has
all bits set.
To fix this just clear the map before setting any new bits.

This broke with def6cfb70bab83c0094bc0cedd27c4eda563043e
"[S390] cpumask: Use accessors code."

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 79663024071..a985a3ba440 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -591,7 +591,8 @@ static int __init setup_possible_cpus(char *s)
 	int pcpus, cpu;
 
 	pcpus = simple_strtoul(s, NULL, 0);
-	for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+	init_cpu_possible(cpumask_of(0));
+	for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
 		set_cpu_possible(cpu, true);
 	return 0;
 }
-- 
GitLab


From b86ccca49cd8f22086c1d135ab3051cf48fb1688 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:26 +0200
Subject: [PATCH 0195/1421] [S390] fix idle time accounting

The steal time is calculated by subtracting the time the virtual cpu
has been running on a physical cpu from the wall clock time. To make
that work all wall time needs to be added to the steal time field first
before the virtual cpu time is subtracted.

The time between the last clock update and the load of the enabled wait
psw needs to be added to the steal_time field as well to make the sum
over all cpu accounting numbers match the wall clock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vtime.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 694b44374a2..c0870a61f90 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -134,6 +134,8 @@ void vtime_start_cpu(void)
 	/* Account time spent with enabled wait psw loaded as idle time. */
 	idle_time = S390_lowcore.int_clock - idle->idle_enter;
 	account_idle_time(idle_time);
+	S390_lowcore.steal_timer +=
+		idle->idle_enter - S390_lowcore.last_update_clock;
 	S390_lowcore.last_update_clock = S390_lowcore.int_clock;
 
 	/* Account system time spent going idle. */
-- 
GitLab


From 5b409ed17bb32c8316b1f456466c70529454573a Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:27 +0200
Subject: [PATCH 0196/1421] [S390] cpu hotplug and accounting values

Reset the cpu timer to the maximum value and correctly initialize the
cpu accounting values in the lowcore when the cpu is started.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/asm-offsets.c |  2 ++
 arch/s390/kernel/entry.S       | 13 +++++++++++++
 arch/s390/kernel/entry64.S     | 13 +++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 67a60016bab..fa9905ce7d0 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -27,6 +27,8 @@ int main(void)
 	DEFINE(__TI_flags, offsetof(struct thread_info, flags));
 	DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
 	DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
+	DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
+	DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
 	BLANK();
 	DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
 	DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 1268aa2991b..f3e27593421 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -837,16 +837,29 @@ mcck_return:
 	__CPUINIT
 	.globl restart_int_handler
 restart_int_handler:
+	basr	%r1,0
+restart_base:
+	spt	restart_vtime-restart_base(%r1)
+	stck	__LC_LAST_UPDATE_CLOCK
+	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
 	l	%r15,__LC_SAVE_AREA+60	# load ksp
 	lctl	%c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
 	lam	%a0,%a15,__LC_AREGS_SAVE_AREA
 	lm	%r6,%r15,__SF_GPRS(%r15) # load registers from clone
+	l	%r1,__LC_THREAD_INFO
+	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
+	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	basr	%r14,0
 	l	%r14,restart_addr-.(%r14)
 	br	%r14			# branch to start_secondary
 restart_addr:
 	.long	start_secondary
+	.align	8
+restart_vtime:
+	.long	0x7fffffff,0xffffffff
 	.previous
 #else
 /*
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index c6fbde13971..84a105838e0 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -831,14 +831,27 @@ mcck_return:
 	__CPUINIT
 	.globl restart_int_handler
 restart_int_handler:
+	basr	%r1,0
+restart_base:
+	spt	restart_vtime-restart_base(%r1)
+	stck	__LC_LAST_UPDATE_CLOCK
+	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
 	lg	%r15,__LC_SAVE_AREA+120 # load ksp
 	lghi	%r10,__LC_CREGS_SAVE_AREA
 	lctlg	%c0,%c15,0(%r10) # get new ctl regs
 	lghi	%r10,__LC_AREGS_SAVE_AREA
 	lam	%a0,%a15,0(%r10)
 	lmg	%r6,%r15,__SF_GPRS(%r15) # load registers from clone
+	lg	%r1,__LC_THREAD_INFO
+	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
+	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	jg	start_secondary
+	.align	8
+restart_vtime:
+	.long	0x7fffffff,0xffffffff
 	.previous
 #else
 /*
-- 
GitLab


From b6112ccbff5ec580d46b584ecc3c3a773b830da2 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:28 +0200
Subject: [PATCH 0197/1421] [S390] add read_persistent_clock

Add a read_persistent_clock function that does not just return 0.
Since timekeeping_init calls the function before time_init has been
called move reset_tod_clock to early.c to make sure that the TOD
clock is running when read_persistent_clock is invoked.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/timex.h |  5 +++++
 arch/s390/kernel/early.c      | 16 ++++++++++++++++
 arch/s390/kernel/head.S       |  7 +++++--
 arch/s390/kernel/time.c       | 28 +++++++++-------------------
 4 files changed, 35 insertions(+), 21 deletions(-)

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index d744c3d62de..cc21e3e20fd 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -11,6 +11,9 @@
 #ifndef _ASM_S390_TIMEX_H
 #define _ASM_S390_TIMEX_H
 
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
 /* Inline functions for clock register access. */
 static inline int set_clock(__u64 time)
 {
@@ -85,4 +88,6 @@ int get_sync_clock(unsigned long long *clock);
 void init_cpu_timer(void);
 unsigned long long monotonic_clock(void);
 
+extern u64 sched_clock_base_cc;
+
 #endif
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index d4e1e5b6cfd..cf09948faad 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -38,6 +38,21 @@ static unsigned long machine_flags;
 
 static void __init setup_boot_command_line(void);
 
+/*
+ * Get the TOD clock running.
+ */
+static void __init reset_tod_clock(void)
+{
+	u64 time;
+
+	if (store_clock(&time) == 0)
+		return;
+	/* TOD clock not running. Set the clock to Unix Epoch. */
+	if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+		disabled_wait(0);
+
+	sched_clock_base_cc = TOD_UNIX_EPOCH;
+}
 
 #ifdef CONFIG_SHARED_KERNEL
 int __init savesys_ipl_nss(char *cmd, const int cmdlen);
@@ -372,6 +387,7 @@ static void __init setup_boot_command_line(void)
  */
 void __init startup_init(void)
 {
+	reset_tod_clock();
 	ipl_save_parameters();
 	rescue_initrd();
 	clear_bss_section();
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 1046c2c9f8d..16f8975325e 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -471,6 +471,8 @@ startup:basr	%r13,0			# get base
 .LPG0:
 	xc	0x200(256),0x200	# partially clear lowcore
 	xc	0x300(256),0x300
+	l	%r1,5f-.LPG0(%r13)
+	stck	0(%r1)
 
 #ifndef CONFIG_MARCH_G5
 	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
@@ -496,9 +498,10 @@ startup:basr	%r13,0			# get base
 	brct	%r0,0b
 #endif
 
-	l	%r13,0f-.LPG0(%r13)
+	l	%r13,4f-.LPG0(%r13)
 	b	0(%r13)
-0:	.long	startup_continue
+4:	.long	startup_continue
+5:	.long	sched_clock_base_cc
 
 #
 # params at 10400 (setup.h)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 05f93e77870..369ff02c4ab 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -52,9 +52,6 @@
 #define USECS_PER_JIFFY     ((unsigned long) 1000000/HZ)
 #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
 
-/* The value of the TOD clock for 1.1.1970. */
-#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
-
 /*
  * Create a small time difference between the timer interrupts
  * on the different cpus to avoid lock contention.
@@ -63,9 +60,10 @@
 
 #define TICK_SIZE tick
 
+u64 sched_clock_base_cc = -1;	/* Force to data section. */
+
 static ext_int_info_t ext_int_info_cc;
 static ext_int_info_t ext_int_etr_cc;
-static u64 sched_clock_base_cc;
 
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
@@ -195,22 +193,12 @@ static void timing_alert_interrupt(__u16 code)
 static void etr_reset(void);
 static void stp_reset(void);
 
-/*
- * Get the TOD clock running.
- */
-static u64 __init reset_tod_clock(void)
+unsigned long read_persistent_clock(void)
 {
-	u64 time;
+	struct timespec ts;
 
-	etr_reset();
-	stp_reset();
-	if (store_clock(&time) == 0)
-		return time;
-	/* TOD clock not running. Set the clock to Unix Epoch. */
-	if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
-		panic("TOD clock not operational.");
-
-	return TOD_UNIX_EPOCH;
+	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
+	return ts.tv_sec;
 }
 
 static cycle_t read_tod_clock(void)
@@ -265,7 +253,9 @@ void update_vsyscall_tz(void)
  */
 void __init time_init(void)
 {
-	sched_clock_base_cc = reset_tod_clock();
+	/* Reset time synchronization interfaces. */
+	etr_reset();
+	stp_reset();
 
 	/* set xtime */
 	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
-- 
GitLab


From ab96e798cbd562a53edd802272e49a5100b29efb Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 14 Apr 2009 15:36:29 +0200
Subject: [PATCH 0198/1421] [S390] boot cputime accounting

Start the cpu time accounting very early to catch the cpu time spent
for the initial kernel setup. To make the output of /proc/uptime
match the sum of all cpu accounting values of the boot cpu reset
xtime and wall_to_monotonic to sane values based on the TOD clock.
The values set by timekeeping_init are off by up to a second.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/head.S  |  8 +++++++-
 arch/s390/kernel/setup.c |  8 ++++++++
 arch/s390/kernel/time.c  | 36 ++++++++++++++++++++++++++++--------
 arch/s390/kernel/vtime.c |  8 --------
 4 files changed, 43 insertions(+), 17 deletions(-)

diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 16f8975325e..bba14494ee0 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -473,7 +473,10 @@ startup:basr	%r13,0			# get base
 	xc	0x300(256),0x300
 	l	%r1,5f-.LPG0(%r13)
 	stck	0(%r1)
-
+	spt	6f-.LPG0(%r13)
+	mvc	__LC_LAST_UPDATE_CLOCK(8),0(%r1)
+	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
+	mvc	__LC_EXIT_TIMER(8),5f-.LPG0(%r13)
 #ifndef CONFIG_MARCH_G5
 	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
 	stidp	__LC_CPUID		# store cpuid
@@ -500,8 +503,11 @@ startup:basr	%r13,0			# get base
 
 	l	%r13,4f-.LPG0(%r13)
 	b	0(%r13)
+	.align	4
 4:	.long	startup_continue
 5:	.long	sched_clock_base_cc
+	.align	8
+6:	.long	0x7fffffff,0xffffffff
 
 #
 # params at 10400 (setup.h)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 163bdfe5a6b..7402b6a39ea 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -434,6 +434,14 @@ setup_lowcore(void)
 #else
 	lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
 #endif
+	lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
+	lc->async_enter_timer = S390_lowcore.async_enter_timer;
+	lc->exit_timer = S390_lowcore.exit_timer;
+	lc->user_timer = S390_lowcore.user_timer;
+	lc->system_timer = S390_lowcore.system_timer;
+	lc->steal_timer = S390_lowcore.steal_timer;
+	lc->last_update_timer = S390_lowcore.last_update_timer;
+	lc->last_update_clock = S390_lowcore.last_update_clock;
 	set_prefix((u32)(unsigned long) lc);
 	lowcore_ptr[0] = lc;
 }
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 369ff02c4ab..6ded50dfa75 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -253,32 +253,52 @@ void update_vsyscall_tz(void)
  */
 void __init time_init(void)
 {
+	struct timespec ts;
+	unsigned long flags;
+	cycle_t now;
+
 	/* Reset time synchronization interfaces. */
 	etr_reset();
 	stp_reset();
 
-	/* set xtime */
-	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-
 	/* request the clock comparator external interrupt */
 	if (register_early_external_interrupt(0x1004,
 					      clock_comparator_interrupt,
 					      &ext_int_info_cc) != 0)
                 panic("Couldn't request external interrupt 0x1004");
 
-	if (clocksource_register(&clocksource_tod) != 0)
-		panic("Could not register TOD clock source");
-
 	/* request the timing alert external interrupt */
 	if (register_early_external_interrupt(0x1406,
 					      timing_alert_interrupt,
 					      &ext_int_etr_cc) != 0)
 		panic("Couldn't request external interrupt 0x1406");
 
+	if (clocksource_register(&clocksource_tod) != 0)
+		panic("Could not register TOD clock source");
+
+	/*
+	 * The TOD clock is an accurate clock. The xtime should be
+	 * initialized in a way that the difference between TOD and
+	 * xtime is reasonably small. Too bad that timekeeping_init
+	 * sets xtime.tv_nsec to zero. In addition the clock source
+	 * change from the jiffies clock source to the TOD clock
+	 * source add another error of up to 1/HZ second. The same
+	 * function sets wall_to_monotonic to a value that is too
+	 * small for /proc/uptime to be accurate.
+	 * Reset xtime and wall_to_monotonic to sane values.
+	 */
+	write_seqlock_irqsave(&xtime_lock, flags);
+	now = get_clock();
+	tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
+	clocksource_tod.cycle_last = now;
+	clocksource_tod.raw_time = xtime;
+	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
+	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+
 	/* Enable TOD clock interrupts on the boot cpu. */
 	init_cpu_timer();
+
 	/* Enable cpu timer interrupts on the boot cpu. */
 	vtime_init();
 }
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index c0870a61f90..38ea92ff04f 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -527,16 +527,8 @@ EXPORT_SYMBOL(del_virt_timer);
  */
 void init_cpu_vtimer(void)
 {
-	struct thread_info *ti = current_thread_info();
 	struct vtimer_queue *vq;
 
-	S390_lowcore.user_timer = ti->user_timer;
-	S390_lowcore.system_timer = ti->system_timer;
-
-	/* kick the virtual timer */
-	asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
-	asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
-
 	/* initialize per cpu vtimer structure */
 	vq = &__get_cpu_var(virt_cpu_timer);
 	INIT_LIST_HEAD(&vq->list);
-- 
GitLab


From 38d726d153cfe5efe5fe22d28d36ab382dda3a5c Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Tue, 14 Apr 2009 10:10:47 -0400
Subject: [PATCH 0199/1421] jbd: use SWRITE_SYNC_PLUG when writing synchronous
 revoke records

The revoke records must be written using the same way as the rest of
the blocks during the commit process; that is, either marked as
synchronous writes or as asynchornous writes.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/jbd/commit.c     |  2 +-
 fs/jbd/revoke.c     | 20 +++++++++++---------
 include/linux/jbd.h |  3 ++-
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index a8e8513a78a..06560c520f4 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -502,7 +502,7 @@ void journal_commit_transaction(journal_t *journal)
 		err = 0;
 	}
 
-	journal_write_revoke_records(journal, commit_transaction);
+	journal_write_revoke_records(journal, commit_transaction, write_op);
 
 	/*
 	 * If we found any dirty or locked buffers, then we should have
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index c7bd649bbbd..1b1a06e1c83 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -67,6 +67,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/bio.h>
 #endif
 #include <linux/log2.h>
 
@@ -99,8 +100,8 @@ struct jbd_revoke_table_s
 #ifdef __KERNEL__
 static void write_one_revoke_record(journal_t *, transaction_t *,
 				    struct journal_head **, int *,
-				    struct jbd_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+				    struct jbd_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
 #endif
 
 /* Utility functions to maintain the revoke table */
@@ -486,7 +487,7 @@ void journal_switch_revoke_table(journal_t *journal)
  */
 
 void journal_write_revoke_records(journal_t *journal,
-				  transaction_t *transaction)
+				  transaction_t *transaction, int write_op)
 {
 	struct journal_head *descriptor;
 	struct jbd_revoke_record_s *record;
@@ -510,14 +511,14 @@ void journal_write_revoke_records(journal_t *journal,
 				hash_list->next;
 			write_one_revoke_record(journal, transaction,
 						&descriptor, &offset,
-						record);
+						record, write_op);
 			count++;
 			list_del(&record->hash);
 			kmem_cache_free(revoke_record_cache, record);
 		}
 	}
 	if (descriptor)
-		flush_descriptor(journal, descriptor, offset);
+		flush_descriptor(journal, descriptor, offset, write_op);
 	jbd_debug(1, "Wrote %d revoke records\n", count);
 }
 
@@ -530,7 +531,8 @@ static void write_one_revoke_record(journal_t *journal,
 				    transaction_t *transaction,
 				    struct journal_head **descriptorp,
 				    int *offsetp,
-				    struct jbd_revoke_record_s *record)
+				    struct jbd_revoke_record_s *record,
+				    int write_op)
 {
 	struct journal_head *descriptor;
 	int offset;
@@ -549,7 +551,7 @@ static void write_one_revoke_record(journal_t *journal,
 	/* Make sure we have a descriptor with space left for the record */
 	if (descriptor) {
 		if (offset == journal->j_blocksize) {
-			flush_descriptor(journal, descriptor, offset);
+			flush_descriptor(journal, descriptor, offset, write_op);
 			descriptor = NULL;
 		}
 	}
@@ -586,7 +588,7 @@ static void write_one_revoke_record(journal_t *journal,
 
 static void flush_descriptor(journal_t *journal,
 			     struct journal_head *descriptor,
-			     int offset)
+			     int offset, int write_op)
 {
 	journal_revoke_header_t *header;
 	struct buffer_head *bh = jh2bh(descriptor);
@@ -601,7 +603,7 @@ static void flush_descriptor(journal_t *journal,
 	set_buffer_jwrite(bh);
 	BUFFER_TRACE(bh, "write");
 	set_buffer_dirty(bh);
-	ll_rw_block(SWRITE, 1, &bh);
+	ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
 }
 #endif
 
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 53ae4399da2..c2049a04fa0 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -978,7 +978,8 @@ extern void	   journal_destroy_revoke(journal_t *);
 extern int	   journal_revoke (handle_t *,
 				unsigned long, struct buffer_head *);
 extern int	   journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void	   journal_write_revoke_records(journal_t *, transaction_t *);
+extern void	   journal_write_revoke_records(journal_t *,
+						transaction_t *, int);
 
 /* Recovery revoke support */
 extern int	journal_set_revoke(journal_t *, unsigned long, tid_t);
-- 
GitLab


From 9d59065cd6fae841ca56c281189d5b8d0817d35f Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 14 Apr 2009 16:13:58 +0200
Subject: [PATCH 0200/1421] ALSA: add private_data to struct snd_jack

Added private_data and private_free fields to struct snd_jack so that
the caller can assign the data.  It'll be helpful for avoiding the
double-free of the jack instance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 include/sound/jack.h | 2 ++
 sound/core/jack.c    | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/include/sound/jack.h b/include/sound/jack.h
index 6b013c6f6a0..f236e426a70 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -50,6 +50,8 @@ struct snd_jack {
 	int type;
 	const char *id;
 	char name[100];
+	void *private_data;
+	void (*private_free)(struct snd_jack *);
 };
 
 #ifdef CONFIG_SND_JACK
diff --git a/sound/core/jack.c b/sound/core/jack.c
index c8254c667c6..d54d1a05fe6 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -35,6 +35,9 @@ static int snd_jack_dev_free(struct snd_device *device)
 {
 	struct snd_jack *jack = device->device_data;
 
+	if (jack->private_free)
+		jack->private_free(jack);
+
 	/* If the input device is registered with the input subsystem
 	 * then we need to use a different deallocator. */
 	if (jack->registered)
-- 
GitLab


From 95c0909961bc5ff18c78b2ab0d093cddc0a8b0b5 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 14 Apr 2009 16:15:29 +0200
Subject: [PATCH 0201/1421] ALSA: hda - Avoid call of snd_jack_report at
 release

Don't call snd_jack_report at release of sigmatel and conexnat codecs
which results in Oops at unloading the module.

The Oops is triggered by the power-up sequence during the free due to
the pincfg restoration.  Since the power-up sequence is involved with
the unsol handling, the jack reporting may be issued during that.
The Oops occurs with this jack reporting because the jack instances
have been already released but the codec doesn't do the proper
book-keeping.

This patch adds the book-keeping of jack instances to avoid the access
to bogus pointers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_conexant.c | 21 ++++++++++++++++++---
 sound/pci/hda/patch_sigmatel.c | 27 ++++++++++++++++++++++-----
 2 files changed, 40 insertions(+), 8 deletions(-)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 1f2ad76ca94..56ce19e68cb 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -350,12 +350,20 @@ static int conexant_mux_enum_put(struct snd_kcontrol *kcontrol,
 }
 
 #ifdef CONFIG_SND_JACK
+static void conexant_free_jack_priv(struct snd_jack *jack)
+{
+	struct conexant_jack *jacks = jack->private_data;
+	jacks->nid = 0;
+	jacks->jack = NULL;
+}
+
 static int conexant_add_jack(struct hda_codec *codec,
 		hda_nid_t nid, int type)
 {
 	struct conexant_spec *spec;
 	struct conexant_jack *jack;
 	const char *name;
+	int err;
 
 	spec = codec->spec;
 	snd_array_init(&spec->jacks, sizeof(*jack), 32);
@@ -368,7 +376,12 @@ static int conexant_add_jack(struct hda_codec *codec,
 	jack->nid = nid;
 	jack->type = type;
 
-	return snd_jack_new(codec->bus->card, name, type, &jack->jack);
+	err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+	if (err < 0)
+		return err;
+	jack->jack->private_data = jack;
+	jack->jack->private_free = conexant_free_jack_priv;
+	return 0;
 }
 
 static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid)
@@ -455,8 +468,10 @@ static void conexant_free(struct hda_codec *codec)
 	if (spec->jacks.list) {
 		struct conexant_jack *jacks = spec->jacks.list;
 		int i;
-		for (i = 0; i < spec->jacks.used; i++)
-			snd_device_free(codec->bus->card, &jacks[i].jack);
+		for (i = 0; i < spec->jacks.used; i++, jacks++) {
+			if (jacks->jack)
+				snd_device_free(codec->bus->card, jacks->jack);
+		}
 		snd_array_free(&spec->jacks);
 	}
 #endif
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 61996a2f45d..ce30b459aee 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3851,6 +3851,15 @@ static void stac_gpio_set(struct hda_codec *codec, unsigned int mask,
 			   AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
 }
 
+#ifdef CONFIG_SND_JACK
+static void stac92xx_free_jack_priv(struct snd_jack *jack)
+{
+	struct sigmatel_jack *jacks = jack->private_data;
+	jacks->nid = 0;
+	jacks->jack = NULL;
+}
+#endif
+
 static int stac92xx_add_jack(struct hda_codec *codec,
 		hda_nid_t nid, int type)
 {
@@ -3860,6 +3869,7 @@ static int stac92xx_add_jack(struct hda_codec *codec,
 	int def_conf = snd_hda_codec_get_pincfg(codec, nid);
 	int connectivity = get_defcfg_connect(def_conf);
 	char name[32];
+	int err;
 
 	if (connectivity && connectivity != AC_JACK_PORT_FIXED)
 		return 0;
@@ -3876,10 +3886,15 @@ static int stac92xx_add_jack(struct hda_codec *codec,
 		snd_hda_get_jack_connectivity(def_conf),
 		snd_hda_get_jack_location(def_conf));
 
-	return snd_jack_new(codec->bus->card, name, type, &jack->jack);
-#else
-	return 0;
+	err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+	if (err < 0) {
+		jack->nid = 0;
+		return err;
+	}
+	jack->jack->private_data = jack;
+	jack->jack->private_free = stac92xx_free_jack_priv;
 #endif
+	return 0;
 }
 
 static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
@@ -4138,8 +4153,10 @@ static void stac92xx_free_jacks(struct hda_codec *codec)
 	if (!codec->bus->shutdown && spec->jacks.list) {
 		struct sigmatel_jack *jacks = spec->jacks.list;
 		int i;
-		for (i = 0; i < spec->jacks.used; i++)
-			snd_device_free(codec->bus->card, &jacks[i].jack);
+		for (i = 0; i < spec->jacks.used; i++, jacks++) {
+			if (jacks->jack)
+				snd_device_free(codec->bus->card, jacks->jack);
+		}
 	}
 	snd_array_free(&spec->jacks);
 #endif
-- 
GitLab


From bd9d074098afb5f8693306d22aaf005bfb50d8f7 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 14 Apr 2009 08:32:55 +0300
Subject: [PATCH 0202/1421] [ARM] pxa/em-x270: explicitly set .gpio_cs in
 TDO35S SPI chip data

After commit a7bb3909b3293d503211d7f6af8ed62c1644b686 ("spi: pxa2xx_spi:
introduce chipselect GPIO to simplify the common cases") the .gpio_cs
field in pxa2xx_spi_chip has to be set explicitly.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 67611dadb44..de40f169521 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -644,8 +644,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = {
 };
 
 static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
-	.rx_threshold = 1,
-	.tx_threshold = 1,
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.gpio_cs	= -1,
 };
 
 static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
-- 
GitLab


From 6845a658e09767e72c12558825ed66a9eda02737 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 9 Apr 2009 20:36:57 +0800
Subject: [PATCH 0203/1421] [ARM] pxa/em-x270: remove duplicated #include

Remove duplicated #include in arch/arm/mach-pxa/em-x270.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index de40f169521..bc0f73fbd4c 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,7 +28,6 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
-#include <linux/delay.h>
 
 #include <media/soc_camera.h>
 
-- 
GitLab


From 7a9a65ced11ece416b730d6f21040a18e62d78a8 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 14 Apr 2009 14:57:36 +0100
Subject: [PATCH 0204/1421] cdc-acm: Fix long standing abuse of
 tty->low_latency

ACM sets the low latency flag but calls the flip buffer routines from
IRQ context which isn't permitted (and as of 2.6.29 causes a warning
hence this one was caught)

Fortunatelt ACM doesn't need to set this flag in the first place as it
only set it to work around problems in ancient (pre tty flip rewrite)
kernels.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/class/cdc-acm.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 869d47cb6db..0a69c0977e3 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -546,10 +546,6 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	tty->driver_data = acm;
 	acm->tty = tty;
 
-	/* force low_latency on so that our tty_push actually forces the data through,
-	   otherwise it is scheduled, and with high data rates data can get lost. */
-	tty->low_latency = 1;
-
 	if (usb_autopm_get_interface(acm->control) < 0)
 		goto early_bail;
 	else
-- 
GitLab


From cf5450930db0ae308584e5361f3345e0ff73e643 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 14 Apr 2009 14:58:11 +0100
Subject: [PATCH 0205/1421] tty: Fix leak in ti-usb

If the ti-usb adapter returns an zero data length frame (which happens)
then we leak a kref.  Found by Christoph Mair <christoph.mair@gmail.com>
who proposed a patch.  The patch here is different as Christoph's patch
didn't work for the case where tty = NULL and data arrived but Christoph
did all the hard work chasing it down.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 2620bf6fe5e..9c4c700c7cc 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1215,20 +1215,22 @@ static void ti_bulk_in_callback(struct urb *urb)
 	}
 
 	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		usb_serial_debug_data(debug, dev, __func__,
-			urb->actual_length, urb->transfer_buffer);
-
-		if (!tport->tp_is_open)
-			dbg("%s - port closed, dropping data", __func__);
-		else
-			ti_recv(&urb->dev->dev, tty,
+	if (tty) {
+		if (urb->actual_length) {
+			usb_serial_debug_data(debug, dev, __func__,
+				urb->actual_length, urb->transfer_buffer);
+
+			if (!tport->tp_is_open)
+				dbg("%s - port closed, dropping data",
+					__func__);
+			else
+				ti_recv(&urb->dev->dev, tty,
 						urb->transfer_buffer,
 						urb->actual_length);
-
-		spin_lock(&tport->tp_lock);
-		tport->tp_icount.rx += urb->actual_length;
-		spin_unlock(&tport->tp_lock);
+			spin_lock(&tport->tp_lock);
+			tport->tp_icount.rx += urb->actual_length;
+			spin_unlock(&tport->tp_lock);
+		}
 		tty_kref_put(tty);
 	}
 
-- 
GitLab


From 28783eb52013ad20784550bccd482e541c9619c2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 14 Apr 2009 14:58:23 +0100
Subject: [PATCH 0206/1421] parport: Fix various uses of parport_pc

These got overlooked first time around.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/include/asm/parport.h | 5 +++--
 drivers/parisc/superio.c         | 3 ++-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index dff3f0253aa..ff9ead640c4 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -117,7 +117,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id
 	if (!strcmp(parent->name, "dma")) {
 		p = parport_pc_probe_port(base, base + 0x400,
 					  op->irqs[0], PARPORT_DMA_NOFIFO,
-					  op->dev.parent->parent);
+					  op->dev.parent->parent, 0);
 		if (!p)
 			return -ENOMEM;
 		dev_set_drvdata(&op->dev, p);
@@ -168,7 +168,8 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id
 	p = parport_pc_probe_port(base, base + 0x400,
 				  op->irqs[0],
 				  slot,
-				  op->dev.parent);
+				  op->dev.parent,
+				  0);
 	err = -ENOMEM;
 	if (!p)
 		goto out_disable_irq;
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 4fa3bb2ddfe..33e5ade774c 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -434,7 +434,8 @@ static void __init superio_parport_init(void)
 			0 /*base_hi*/,
 			PAR_IRQ, 
 			PARPORT_DMA_NONE /* dma */,
-			NULL /*struct pci_dev* */) )
+			NULL /*struct pci_dev* */),
+			0 /* shared irq flags */ )
 
 		printk(KERN_WARNING PFX "Probing parallel port failed.\n");
 #endif	/* CONFIG_PARPORT_PC */
-- 
GitLab


From 19e05426201651fe24c4e07bef7f6de0d2305218 Mon Sep 17 00:00:00 2001
From: Tony Breeds <tony@bakeyournoodle.com>
Date: Tue, 14 Apr 2009 14:58:41 +0100
Subject: [PATCH 0207/1421] parport_pc: Fix build failure
 drivers/parport/parport_pc.c for powerpc

In commit 51dcdfec6a274afc1c6fce180d582add9ff512c0 ("parport: Use the
PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg.
This isn't being supplied on powerpc.  This patch make powerpc fallback
to the old behaviour, that is using "0" for irqflags.

Fixes build failure:

  In file included from drivers/parport/parport_pc.c:68:
  arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports':
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  make[3]: *** [drivers/parport/parport_pc.o] Error 1

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/include/asm/parport.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
index 414c50e2e88..94942d60ddf 100644
--- a/arch/powerpc/include/asm/parport.h
+++ b/arch/powerpc/include/asm/parport.h
@@ -29,7 +29,7 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
 		prop = of_get_property(np, "interrupts", NULL);
 		if (!prop)
 			continue;
-		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
 			count++;
 	}
 	return count;
-- 
GitLab


From 78c5b82ee68207a176ad5ca5eabdb2dbe5cfbfd3 Mon Sep 17 00:00:00 2001
From: Leandro Dorileo <ldorileo@gmail.com>
Date: Tue, 14 Apr 2009 14:59:51 +0100
Subject: [PATCH 0208/1421] tty: Update some of the USB kernel doc

Updates some usb_serial_port members documentation.

Signed-off-by: Leandro Dorileo <ldorileo@gmail.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/usb/serial.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b9584254259..625e9e4639c 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -29,7 +29,7 @@
 /**
  * usb_serial_port: structure for the specific ports of a device.
  * @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
+ * @port: pointer to the corresponding tty_port for this port.
  * @lock: spinlock to grab when updating portions of this structure.
  * @mutex: mutex used to synchronize serial_open() and serial_close()
  *	access for this port.
@@ -44,19 +44,22 @@
  * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
  * 	for this port.
  * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
  * @read_urb: pointer to the bulk in struct urb for this port.
  * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
  *	port.
  * @bulk_out_buffer: pointer to the bulk out buffer for this port.
  * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
  * @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_urb_busy: port`s writing status
  * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
  *	port.
  * @write_wait: a wait_queue_head_t used by the port.
  * @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
  * @throttled: nonzero if the read urb is inactive to throttle the device
  * @throttle_req: nonzero if the tty wants to throttle us
+ * @console: attached usb serial console
+ * @dev: pointer to the serial device
  *
  * This structure is used by the usb-serial core and drivers for the specific
  * ports of a device.
-- 
GitLab


From 94ca8e4852807fc42d2f64fcaf248aafc4f2e6a7 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Tue, 14 Apr 2009 10:56:48 -0500
Subject: [PATCH 0209/1421] x86: UV: BAU partition-relative distribution map

This patch enables each partition's BAU distribution bit map
to be partition-relative.

The distribution bitmap had been constructed assuming 0 as the base
node number.  That construct would not have allowed a total system of
greater than 256 nodes.
It also corrects an error that occurred when the first blade's nasid
was not zero.  That nasid was stored as the base node.
The base node number gets added by hardware to the node numbers implied
in the distribution bitmap, resulting in invalid target nasids.

Tested on the UV hardware simulator.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1Ltl0C-0004Ob-37@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index fced96e94e2..98307f95349 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -25,6 +25,8 @@ static int			uv_bau_retry_limit __read_mostly;
 
 /* position of pnode (which is nasid>>1): */
 static int			uv_nshift __read_mostly;
+/* base pnode in this partition */
+static int			uv_partition_base_pnode __read_mostly;
 
 static unsigned long		uv_mmask __read_mostly;
 
@@ -43,7 +45,7 @@ static int __init blade_to_first_node(int blade)
 		if (blade == b)
 			return node;
 	}
-	BUG();
+	return -1; /* shouldn't happen */
 }
 
 /*
@@ -359,7 +361,8 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 			locals++;
 			continue;
 		}
-		bau_node_set(pnode, &bau_desc->distribution);
+		bau_node_set(pnode - uv_partition_base_pnode,
+				&bau_desc->distribution);
 		i++;
 	}
 	if (i == 0) {
@@ -728,7 +731,12 @@ uv_activation_descriptor_init(int node, int pnode)
 	for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
 		memset(ad2, 0, sizeof(struct bau_desc));
 		ad2->header.sw_ack_flag = 1;
-		ad2->header.base_dest_nodeid = uv_cpu_to_pnode(0);
+		/*
+		 * base_dest_nodeid is the first node in the partition, so
+		 * the bit map will indicate partition-relative node numbers.
+		 * note that base_dest_nodeid is actually a nasid.
+		 */
+		ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
 		ad2->header.command = UV_NET_ENDPOINT_INTD;
 		ad2->header.int_both = 1;
 		/*
@@ -825,6 +833,11 @@ static int __init uv_bau_init(void)
 	    kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
 	BUG_ON(!uv_bau_table_bases);
 
+	uv_partition_base_pnode = 0x7fffffff;
+	for (blade = 0; blade < nblades; blade++)
+		if (uv_blade_nr_possible_cpus(blade) &&
+			(uv_blade_to_pnode(blade) < uv_partition_base_pnode))
+			uv_partition_base_pnode = uv_blade_to_pnode(blade);
 	for (blade = 0; blade < nblades; blade++)
 		if (uv_blade_nr_possible_cpus(blade))
 			uv_init_blade(blade);
-- 
GitLab


From 2344b5b6851466511663154e517f8b31f70c4bb6 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 14 Apr 2009 17:08:34 +0100
Subject: [PATCH 0210/1421] Fix lpfc_parse_bg_err()'s use of do_div()

Fix lpfc_parse_bg_err()'s use of do_div().  It should be passing a 64-bit
variable as the first parameter.  However, since it's only using a 32-bit
variable, it doesn't need to use do_div() at all, but can instead use the
division operator.

This deals with the following warnings:

    CC      drivers/scsi/lpfc/lpfc_scsi.o
  drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err':
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index b1bd3fc7bae..36fd2e75da1 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1394,7 +1394,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
 		 */
 		cmd->sense_buffer[8] = 0;     /* Information */
 		cmd->sense_buffer[9] = 0xa;   /* Add. length */
-		do_div(bghm, cmd->device->sector_size);
+		bghm /= cmd->device->sector_size;
 
 		failing_sector = scsi_get_lba(cmd);
 		failing_sector += bghm;
-- 
GitLab


From 68c84342171034120c8a1f6dfb8ef51b14250f11 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Wed, 8 Apr 2009 10:58:23 +0800
Subject: [PATCH 0211/1421] drm/i915: fix scheduling while holding the new
 active list spinlock

regression caused by commit 5e118f4139feafe97e913df67b1f7c1e5083e535:
i915_gem_object_move_to_inactive() should be called in task context,
as it calls fput();

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
[anholt: Add more detail to the comment about the lock break that's added]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6dca9fc7c1d..4642115902d 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1596,8 +1596,19 @@ i915_gem_retire_request(struct drm_device *dev,
 
 		if (obj->write_domain != 0)
 			i915_gem_object_move_to_flushing(obj);
-		else
+		else {
+			/* Take a reference on the object so it won't be
+			 * freed while the spinlock is held.  The list
+			 * protection for this spinlock is safe when breaking
+			 * the lock like this since the next thing we do
+			 * is just get the head of the list again.
+			 */
+			drm_gem_object_reference(obj);
 			i915_gem_object_move_to_inactive(obj);
+			spin_unlock(&dev_priv->mm.active_list_lock);
+			drm_gem_object_unreference(obj);
+			spin_lock(&dev_priv->mm.active_list_lock);
+		}
 	}
 out:
 	spin_unlock(&dev_priv->mm.active_list_lock);
-- 
GitLab


From 6f66cbc63081fd70e3191b4dbb796746780e5ae1 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Tue, 14 Apr 2009 19:25:42 +0100
Subject: [PATCH 0212/1421] x86 microcode: revert some work_on_cpu

Revert part of af5c820a3169e81af869c113e18ec7588836cd50 ("x86: cpumask:
use work_on_cpu in arch/x86/kernel/microcode_core.c")

That change is causing only one Intel CPU's microcode to be updated e.g.
microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22
where before it announced that also for CPU0 and CPU1 and CPU2.

We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code,
because Intel's request_microcode_user() involves a copy_from_user() from
/sbin/microcode_ctl, which therefore needs to be on that CPU at the time.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/microcode_core.c | 33 +++++++++++---------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index a0f3851ef31..2e0eb414095 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -108,40 +108,29 @@ struct ucode_cpu_info		ucode_cpu_info[NR_CPUS];
 EXPORT_SYMBOL_GPL(ucode_cpu_info);
 
 #ifdef CONFIG_MICROCODE_OLD_INTERFACE
-struct update_for_cpu {
-	const void __user	*buf;
-	size_t			size;
-};
-
-static long update_for_cpu(void *_ufc)
-{
-	struct update_for_cpu *ufc = _ufc;
-	int error;
-
-	error = microcode_ops->request_microcode_user(smp_processor_id(),
-						      ufc->buf, ufc->size);
-	if (error < 0)
-		return error;
-	if (!error)
-		microcode_ops->apply_microcode(smp_processor_id());
-	return error;
-}
-
 static int do_microcode_update(const void __user *buf, size_t size)
 {
+	cpumask_t old;
 	int error = 0;
 	int cpu;
-	struct update_for_cpu ufc = { .buf = buf, .size = size };
+
+	old = current->cpus_allowed;
 
 	for_each_online_cpu(cpu) {
 		struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 		if (!uci->valid)
 			continue;
-		error = work_on_cpu(cpu, update_for_cpu, &ufc);
+
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		error = microcode_ops->request_microcode_user(cpu, buf, size);
 		if (error < 0)
-			break;
+			goto out;
+		if (!error)
+			microcode_ops->apply_microcode(cpu);
 	}
+out:
+	set_cpus_allowed_ptr(current, &old);
 	return error;
 }
 
-- 
GitLab


From 29dab4fd3176e25dfab6cd763beb02d87973c288 Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Tue, 14 Apr 2009 22:40:04 +0200
Subject: [PATCH 0213/1421] [ALSA] intel8x0: fix wrong conditions in ac97_clock
 measure routine

Also add a little code cleanup.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/intel8x0.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 6962f94d1be..10f8609e9c6 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2689,7 +2689,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	}
 	ichdev = &chip->ichd[ICHD_PCMOUT];
 	ichdev->physbuf = subs->dma_buffer.addr;
-	ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE;
+	ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE;
 	ichdev->substream = NULL; /* don't process interrupts */
 
 	/* set rate */
@@ -2766,10 +2766,10 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	if (pos < 40000 || pos >= 60000) 
 		/* abnormal value. hw problem? */
 		printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
-	else if (pos > 40500 || pos < 41500)
+	else if (pos > 40500 && pos < 41500)
 		/* first exception - 41000Hz reference clock */
 		chip->ac97_bus->clock = 41000;
-	else if (pos > 43600 || pos < 44600)
+	else if (pos > 43600 && pos < 44600)
 		/* second exception - 44100HZ reference clock */
 		chip->ac97_bus->clock = 44100;
 	else if (pos < 47500 || pos > 48500)
-- 
GitLab


From 0882e8dd3aad33eca41696d463bb896e6c8817eb Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 14 Apr 2009 13:51:48 -0700
Subject: [PATCH 0214/1421] Linux 2.6.30-rc2

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 4f7e3ccde05..bfdef56add3 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Temporary Tasmanian Devil
 
 # *DOCUMENTATION*
-- 
GitLab


From 8e255baa449df3049a8827a7f1f4f12b6921d0d1 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 8 Apr 2009 21:06:35 -0700
Subject: [PATCH 0215/1421] sparc64: Fix smp_callin() locking.

Interrupts must be disabled when taking the IPI lock.

Caught by lockdep.

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 708e12a26b0..f7642e5a94d 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -118,9 +118,9 @@ void __cpuinit smp_callin(void)
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	ipi_call_lock();
+	ipi_call_lock_irq();
 	cpu_set(cpuid, cpu_online_map);
-	ipi_call_unlock();
+	ipi_call_unlock_irq();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
-- 
GitLab


From c7cb1521b3289e2d107d3139ad7a902b386d7e43 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 14 Apr 2009 02:00:48 -0700
Subject: [PATCH 0216/1421] sparc: asm/atomic.h on 32bit should include
 asm/system.h for xchg

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/atomic_32.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index ce465975a6a..bb91b1248cd 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -15,6 +15,8 @@
 
 #ifdef __KERNEL__
 
+#include <asm/system.h>
+
 #define ATOMIC_INIT(i)  { (i) }
 
 extern int __atomic_add_return(int, atomic_t *);
-- 
GitLab


From 6c0f8bc77233d000a34a01989c42e650c8c32180 Mon Sep 17 00:00:00 2001
From: Stoyan Gaydarov <stoyboyker@gmail.com>
Date: Tue, 14 Apr 2009 19:46:19 -0700
Subject: [PATCH 0217/1421] sbus: changed ioctls to unlocked

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/sbus/char/jsflash.c | 15 ++++++++++-----
 drivers/sbus/char/uctrl.c   |  7 +++----
 2 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index e6d1fc8c54f..a85ad05e854 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -383,18 +383,22 @@ static int jsf_ioctl_program(void __user *arg)
 	return 0;
 }
 
-static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
-    unsigned long arg)
+static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 {
+	lock_kernel();
 	int error = -ENOTTY;
 	void __user *argp = (void __user *)arg;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!capable(CAP_SYS_ADMIN)) {
+		unlock_kernel();
 		return -EPERM;
+	}
 	switch (cmd) {
 	case JSFLASH_IDENT:
-		if (copy_to_user(argp, &jsf0.id, JSFIDSZ))
+		if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 	case JSFLASH_ERASE:
 		error = jsf_ioctl_erase(arg);
@@ -404,6 +408,7 @@ static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
 		break;
 	}
 
+	unlock_kernel();
 	return error;
 }
 
@@ -439,7 +444,7 @@ static const struct file_operations jsf_fops = {
 	.llseek =	jsf_lseek,
 	.read =		jsf_read,
 	.write =	jsf_write,
-	.ioctl =	jsf_ioctl,
+	.unlocked_ioctl =	jsf_ioctl,
 	.mmap =		jsf_mmap,
 	.open =		jsf_open,
 	.release =	jsf_release,
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 27993c37775..2c56fd56ec6 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -197,9 +197,8 @@ static struct uctrl_driver {
 static void uctrl_get_event_status(struct uctrl_driver *);
 static void uctrl_get_external_status(struct uctrl_driver *);
 
-static int
-uctrl_ioctl(struct inode *inode, struct file *file,
-	      unsigned int cmd, unsigned long arg)
+static long
+uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
 		default:
@@ -226,7 +225,7 @@ static irqreturn_t uctrl_interrupt(int irq, void *dev_id)
 static const struct file_operations uctrl_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
-	.ioctl =	uctrl_ioctl,
+	.unlocked_ioctl =	uctrl_ioctl,
 	.open =		uctrl_open,
 };
 
-- 
GitLab


From 5e901b37e4a8a305542ad3a776bce997efd7e5e9 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 9 Apr 2009 14:07:27 +0800
Subject: [PATCH 0218/1421] [ARM] pxa/magician: remove un-necessary #include of
 pxa-regs.h and hardware.h

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/pxa/magician.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index f7c4544f785..0625c342a1c 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -27,8 +27,6 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/magician.h>
 #include <asm/mach-types.h>
 #include "../codecs/uda1380.h"
-- 
GitLab


From eae17754ab1ffc88190ebcbd33b6bec79e6e559a Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 13 Apr 2009 11:48:03 +0100
Subject: [PATCH 0219/1421] [ARM] pxa: merge AC97 platform data structures

Currently there are two possible platform datas for the PXA AC97 driver:
one supported by the generic AC97 driver only which provides callbacks
to allow board-specific configuration at stream startup and teardown,
and another for pxa2xx-ac97-lib which allows configuration of the reset
GPIO for PXA2xx CPUs.

Obviously this won't actually work when using the generic AC97 driver
since the drivers will attempt to parse the platform data in both
formats. Fix this by merging the two structures.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/audio.h | 10 ++++++++++
 include/sound/pxa2xx-lib.h             | 15 ---------------
 sound/arm/pxa2xx-ac97-lib.c            |  2 +-
 3 files changed, 11 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index f82f96dd105..16eb02552d5 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -4,12 +4,22 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
 typedef struct {
 	int (*startup)(struct snd_pcm_substream *, void *);
 	void (*shutdown)(struct snd_pcm_substream *, void *);
 	void (*suspend)(void *);
 	void (*resume)(void *);
 	void *priv;
+	int reset_gpio;
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h
index 2c894b600e5..2fd3d251d9a 100644
--- a/include/sound/pxa2xx-lib.h
+++ b/include/sound/pxa2xx-lib.h
@@ -42,19 +42,4 @@ extern int pxa2xx_ac97_hw_resume(void);
 extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
 extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
 
-/* AC97 platform_data */
-/**
- * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- *              a -1 value means no gpio will be used for reset
- *
- * Platform data should only be specified for pxa27x CPUs where a silicon bug
- * prevents correct operation of the reset line. If not specified, the default
- * behaviour is to consider gpio 113 as the AC97 reset line, which is the
- * default on most boards.
- */
-struct pxa2xx_ac97_platform_data {
-	int reset_gpio;
-};
-
 #endif
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 0afd1a8226f..a2c12d105c9 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -364,7 +364,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
 int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 {
 	int ret;
-	struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;
+	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
 
 	if (pdata) {
 		switch (pdata->reset_gpio) {
-- 
GitLab


From cc8d2730ad6fe79699cedd9cccfe632570830c3c Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Mon, 13 Apr 2009 16:07:55 +0200
Subject: [PATCH 0220/1421] [ARM] pxa/mioa701: use GPIO95 as AC97 reset line

MioA701 board's GPIO95 is the AC97 line. The other GPIO113
is not connected to the sound chip, but to the GSM chip as a
wakeup line.

It happens that when the pxa2xx_ac97 driver reconfigures the
gpio as an "out gpio" for AC97 reset (bug workaround), it
hangs the GSM chip.

As AC97 platform data now enables to specify the AC97 reset
line, use it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/mioa701.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 9203b069b35..ff8052ce0a0 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
 
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+	.reset_gpio = 95,
+};
+
 /*
  * Mio global
  */
@@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-- 
GitLab


From adf213c43898f2324cfc35c315556bc21cb65b31 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Mon, 6 Apr 2009 11:01:15 +0000
Subject: [PATCH 0221/1421] powerpc: Allow 256kB pages with SHMEM

Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed,
let powerpc 256kB pages coexist with CONFIG_SHMEM again.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5b50e1ac617..4c780455136 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -462,7 +462,7 @@ config PPC_64K_PAGES
 
 config PPC_256K_PAGES
 	bool "256k page size" if 44x
-	depends on !STDBINUTILS && (!SHMEM || BROKEN)
+	depends on !STDBINUTILS
 	help
 	  Make the page size 256k.
 
-- 
GitLab


From c58dc575f3c8bdc69fb868ec51e1c80ee7cae5e7 Mon Sep 17 00:00:00 2001
From: Mike Mason <mmlnx@us.ibm.com>
Date: Fri, 10 Apr 2009 08:57:03 +0000
Subject: [PATCH 0222/1421] powerpc/pseries: Set error_state to
 pci_channel_io_normal in eeh_report_reset()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

While adding native EEH support to Emulex and Qlogic drivers, it was
discovered that dev->error_state was set to pci_io_channel_normal too
late in the recovery process. These drivers rely on error_state to
determine if they can access the device in their slot_reset callback,
thus error_state needs to be set to pci_io_channel_normal in
eeh_report_reset(). Below is a detailed explanation (courtesy of Richard
Lary) as to why this is necessary.

Background:
PCI MMIO or DMA accesses to a frozen slot generate additional EEH
errors. If the number of additional EEH errors exceeds EEH_MAX_FAILS the
adapter will be shutdown. To avoid triggering excessive EEH errors and
an undesirable adapter shutdown, some drivers use the
pci_channel_offline(dev) wrapper function to return a Boolean value
based on the value of pci_dev->error_state to determine if PCI MMIO or
DMA accesses are safe. If the wrapper returns TRUE, drivers must not
make PCI MMIO or DMA access to their hardware.

The pci_dev structure member error_state reflects one of three values,
1) pci_channel_io_normal, 2) pci_channel_io_frozen, 3)
pci_channel_io_perm_failure.  Function pci_channel_offline(dev) returns
TRUE if error_state is pci_channel_io_frozen or pci_channel_io_perm_failure.

The EEH driver sets pci_dev->error_state to pci_channel_io_frozen at the
point where the PCI slot is frozen. Currently, the EEH driver restores
dev->error_state to pci_channel_io_normal in eeh_report_resume() before
calling the driver's resume callback. However, when the EEH driver calls
the driver's slot_reset callback() from eeh_report_reset(), it
incorrectly indicates the error state is still pci_channel_io_frozen.

Waiting until eeh_report_resume() to restore dev->error_state to
pci_channel_io_normal is too late for Emulex and QLogic FC drivers and
any other drivers which are designed to use common code paths in these
two cases: i) those called after the driver's slot_reset callback() and
ii) those called after the PCI slot is frozen but before the driver's
slot_reset callback is called. Case i) all driver paths executed to
reinitialize the hardware after a reset and case ii) all code paths
executed by driver kernel threads that run asynchronous to the main
driver thread, such as interrupt handlers and worker threads to process
driver work queues.

Emulex and QLogic FC drivers are designed with common code paths which
require that pci_channel_offline(dev) reflect the true state of the
hardware. The state transitions that the hardware takes from Normal
Operations to Slot Frozen to Reset to Normal Operations are documented
in the Power Architecture™ Platform Requirements+ (PAPR+) in Table 75.
PE State Control.

PAPR defines the following 3 states:

0 -- Not reset, Not EEH stopped, MMIO load/store allowed, DMA allowed
     (Normal Operations)
1 -- Reset, Not EEH stopped, MMIO load/store disabled, DMA disabled
2 -- Not reset, EEH stopped, MMIO load/store disabled, DMA disabled
     (Slot Frozen)

An EEH error places the slot in state 2 (Frozen) and the adapter driver
is notified that an EEH error was detected. If the adapter driver
returns PCI_ERS_RESULT_NEED_RESET, the EEH driver calls
eeh_reset_device() to place the slot into state 1 (Reset) and
eeh_reset_device completes by placing the slot into State 0 (Normal
Operations). Upon return from eeh_reset_device(), the EEH driver calls
eeh_report_reset, which then calls the adapter's slot_reset callback. At
the time the adapter's slot_reset callback is called, the true state of
the hardware is Normal Operations and should be accurately reflected by
setting dev->error_state to pci_channel_io_normal.

The current implementation of EEH driver does not do so and requires
this change to correct this deficiency.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/eeh_driver.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 380420f8c40..9a2a6e32f00 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -182,6 +182,8 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata)
 	if (!driver)
 		return;
 
+	dev->error_state = pci_channel_io_normal;
+
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
-- 
GitLab


From 306a82881b14d950d59e0b59a55093a07d82aa9a Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 13 Apr 2009 14:09:09 +0000
Subject: [PATCH 0223/1421] powerpc: Fix data-corrupting bug in
 __futex_atomic_op

Richard Henderson pointed out that the powerpc __futex_atomic_op has a
bug: it will write the wrong value if the stwcx. fails and it has to
retry the lwarx/stwcx. loop, since 'oparg' will have been overwritten
by the result from the first time around the loop.  This happens
because it uses the same register for 'oparg' (an input) as it uses
for the result.

This fixes it by using separate registers for 'oparg' and 'ret'.

Cc: stable@kernel.org
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/futex.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 6d406c5c5de..9696cc36d2d 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -27,7 +27,7 @@
 	PPC_LONG "1b,4b,2b,4b\n" \
 	".previous" \
 	: "=&r" (oldval), "=&r" (ret) \
-	: "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+	: "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
 	: "cr0", "memory")
 
 static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
@@ -47,19 +47,19 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
-- 
GitLab


From b71a0c296cee4debaf446760fbd29ead1587a7ac Mon Sep 17 00:00:00 2001
From: Sachin Sant <sachinp@in.ibm.com>
Date: Tue, 14 Apr 2009 14:35:55 +0000
Subject: [PATCH 0224/1421] powerpc: pseries/dtl.c should include
 asm/firmware.h

A randconfig build on powerpc failed with:

dtl.c: In function 'dtl_init':
dtl.c:238: error: implicit declaration of function 'firmware_has_feature'
dtl.c:238: error: 'FW_FEATURE_SPLPAR' undeclared (first use in this function)

- We need firmware.h for these definitions.

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/dtl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index fafcaa0e81e..ab69925d579 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -25,6 +25,7 @@
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/firmware.h>
 
 #include "plpar_wrappers.h"
 
-- 
GitLab


From 8f3d8ba20e67991b531e9c0227dcd1f99271a32c Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 7 Apr 2009 19:55:13 +0200
Subject: [PATCH 0225/1421] block: move bio list helpers into bio.h

It's used by DM and MD and generally useful, so move the bio list
helpers into bio.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/md/dm-bio-list.h    | 117 ------------------------------------
 drivers/md/dm-delay.c       |   2 -
 drivers/md/dm-mpath.c       |   1 -
 drivers/md/dm-raid1.c       |   1 -
 drivers/md/dm-region-hash.c |   1 -
 drivers/md/dm-snap.c        |   1 -
 drivers/md/dm.c             |   1 -
 drivers/md/raid1.c          |   1 -
 drivers/md/raid10.c         |   1 -
 include/linux/bio.h         | 109 +++++++++++++++++++++++++++++++++
 10 files changed, 109 insertions(+), 126 deletions(-)
 delete mode 100644 drivers/md/dm-bio-list.h

diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h
deleted file mode 100644
index 345098b4ca7..00000000000
--- a/drivers/md/dm-bio-list.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2004 Red Hat UK Ltd.
- *
- * This file is released under the GPL.
- */
-
-#ifndef DM_BIO_LIST_H
-#define DM_BIO_LIST_H
-
-#include <linux/bio.h>
-
-#ifdef CONFIG_BLOCK
-
-struct bio_list {
-	struct bio *head;
-	struct bio *tail;
-};
-
-static inline int bio_list_empty(const struct bio_list *bl)
-{
-	return bl->head == NULL;
-}
-
-static inline void bio_list_init(struct bio_list *bl)
-{
-	bl->head = bl->tail = NULL;
-}
-
-#define bio_list_for_each(bio, bl) \
-	for (bio = (bl)->head; bio; bio = bio->bi_next)
-
-static inline unsigned bio_list_size(const struct bio_list *bl)
-{
-	unsigned sz = 0;
-	struct bio *bio;
-
-	bio_list_for_each(bio, bl)
-		sz++;
-
-	return sz;
-}
-
-static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
-{
-	bio->bi_next = NULL;
-
-	if (bl->tail)
-		bl->tail->bi_next = bio;
-	else
-		bl->head = bio;
-
-	bl->tail = bio;
-}
-
-static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
-{
-	bio->bi_next = bl->head;
-
-	bl->head = bio;
-
-	if (!bl->tail)
-		bl->tail = bio;
-}
-
-static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
-{
-	if (!bl2->head)
-		return;
-
-	if (bl->tail)
-		bl->tail->bi_next = bl2->head;
-	else
-		bl->head = bl2->head;
-
-	bl->tail = bl2->tail;
-}
-
-static inline void bio_list_merge_head(struct bio_list *bl,
-				       struct bio_list *bl2)
-{
-	if (!bl2->head)
-		return;
-
-	if (bl->head)
-		bl2->tail->bi_next = bl->head;
-	else
-		bl->tail = bl2->tail;
-
-	bl->head = bl2->head;
-}
-
-static inline struct bio *bio_list_pop(struct bio_list *bl)
-{
-	struct bio *bio = bl->head;
-
-	if (bio) {
-		bl->head = bl->head->bi_next;
-		if (!bl->head)
-			bl->tail = NULL;
-
-		bio->bi_next = NULL;
-	}
-
-	return bio;
-}
-
-static inline struct bio *bio_list_get(struct bio_list *bl)
-{
-	struct bio *bio = bl->head;
-
-	bl->head = bl->tail = NULL;
-
-	return bio;
-}
-
-#endif /* CONFIG_BLOCK */
-#endif
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 59ee1b015d2..559dbb52bc8 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -15,8 +15,6 @@
 
 #include <linux/device-mapper.h>
 
-#include "dm-bio-list.h"
-
 #define DM_MSG_PREFIX "delay"
 
 struct delay_c {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 095f77bf968..6a386ab4f7e 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -8,7 +8,6 @@
 #include <linux/device-mapper.h>
 
 #include "dm-path-selector.h"
-#include "dm-bio-list.h"
 #include "dm-bio-record.h"
 #include "dm-uevent.h"
 
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 536ef0bef15..076fbb4e967 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -5,7 +5,6 @@
  * This file is released under the GPL.
  */
 
-#include "dm-bio-list.h"
 #include "dm-bio-record.h"
 
 #include <linux/init.h>
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 59f8d9df9e1..7b899be0b08 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -14,7 +14,6 @@
 #include <linux/vmalloc.h>
 
 #include "dm.h"
-#include "dm-bio-list.h"
 
 #define	DM_MSG_PREFIX	"region hash"
 
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index 981a0413068..d73f17fc777 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -22,7 +22,6 @@
 #include <linux/workqueue.h>
 
 #include "dm-exception-store.h"
-#include "dm-bio-list.h"
 
 #define DM_MSG_PREFIX "snapshots"
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 8a994be035b..424f7b048c3 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -6,7 +6,6 @@
  */
 
 #include "dm.h"
-#include "dm-bio-list.h"
 #include "dm-uevent.h"
 
 #include <linux/init.h>
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 274b491a11c..36df9109cde 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -35,7 +35,6 @@
 #include <linux/blkdev.h>
 #include <linux/seq_file.h>
 #include "md.h"
-#include "dm-bio-list.h"
 #include "raid1.h"
 #include "bitmap.h"
 
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e293d92641a..81a54f17417 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -22,7 +22,6 @@
 #include <linux/blkdev.h>
 #include <linux/seq_file.h>
 #include "md.h"
-#include "dm-bio-list.h"
 #include "raid10.h"
 #include "bitmap.h"
 
diff --git a/include/linux/bio.h b/include/linux/bio.h
index b900d2c67d2..b89cf2d8289 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -504,6 +504,115 @@ static inline int bio_has_data(struct bio *bio)
 	return bio && bio->bi_io_vec != NULL;
 }
 
+/*
+ * BIO list managment for use by remapping drivers (e.g. DM or MD).
+ *
+ * A bio_list anchors a singly-linked list of bios chained through the bi_next
+ * member of the bio.  The bio_list also caches the last list member to allow
+ * fast access to the tail.
+ */
+struct bio_list {
+	struct bio *head;
+	struct bio *tail;
+};
+
+static inline int bio_list_empty(const struct bio_list *bl)
+{
+	return bl->head == NULL;
+}
+
+static inline void bio_list_init(struct bio_list *bl)
+{
+	bl->head = bl->tail = NULL;
+}
+
+#define bio_list_for_each(bio, bl) \
+	for (bio = (bl)->head; bio; bio = bio->bi_next)
+
+static inline unsigned bio_list_size(const struct bio_list *bl)
+{
+	unsigned sz = 0;
+	struct bio *bio;
+
+	bio_list_for_each(bio, bl)
+		sz++;
+
+	return sz;
+}
+
+static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
+{
+	bio->bi_next = NULL;
+
+	if (bl->tail)
+		bl->tail->bi_next = bio;
+	else
+		bl->head = bio;
+
+	bl->tail = bio;
+}
+
+static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
+{
+	bio->bi_next = bl->head;
+
+	bl->head = bio;
+
+	if (!bl->tail)
+		bl->tail = bio;
+}
+
+static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
+{
+	if (!bl2->head)
+		return;
+
+	if (bl->tail)
+		bl->tail->bi_next = bl2->head;
+	else
+		bl->head = bl2->head;
+
+	bl->tail = bl2->tail;
+}
+
+static inline void bio_list_merge_head(struct bio_list *bl,
+				       struct bio_list *bl2)
+{
+	if (!bl2->head)
+		return;
+
+	if (bl->head)
+		bl2->tail->bi_next = bl->head;
+	else
+		bl->tail = bl2->tail;
+
+	bl->head = bl2->head;
+}
+
+static inline struct bio *bio_list_pop(struct bio_list *bl)
+{
+	struct bio *bio = bl->head;
+
+	if (bio) {
+		bl->head = bl->head->bi_next;
+		if (!bl->head)
+			bl->tail = NULL;
+
+		bio->bi_next = NULL;
+	}
+
+	return bio;
+}
+
+static inline struct bio *bio_list_get(struct bio_list *bl)
+{
+	struct bio *bio = bl->head;
+
+	bl->head = bl->tail = NULL;
+
+	return bio;
+}
+
 #if defined(CONFIG_BLK_DEV_INTEGRITY)
 
 #define bip_vec_idx(bip, idx)	(&(bip->bip_vec[(idx)]))
-- 
GitLab


From f600abe2de81628c40effbb3f8eaf5af0d291e57 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 8 Apr 2009 14:22:01 +0200
Subject: [PATCH 0226/1421] block: fix bad spelling of quiesce

Credit goes to Andrew Morton for spotting this one.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-sysfs.c | 4 ++--
 block/blk.h       | 4 ++--
 block/elevator.c  | 8 ++++----
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 73f36beff5c..cac4e9febe6 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -209,14 +209,14 @@ static ssize_t queue_iostats_store(struct request_queue *q, const char *page,
 	ssize_t ret = queue_var_store(&stats, page, count);
 
 	spin_lock_irq(q->queue_lock);
-	elv_quisce_start(q);
+	elv_quiesce_start(q);
 
 	if (stats)
 		queue_flag_set(QUEUE_FLAG_IO_STAT, q);
 	else
 		queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
 
-	elv_quisce_end(q);
+	elv_quiesce_end(q);
 	spin_unlock_irq(q->queue_lock);
 
 	return ret;
diff --git a/block/blk.h b/block/blk.h
index 24fcaeeaf62..5dfc41267a0 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -70,8 +70,8 @@ void blk_queue_congestion_threshold(struct request_queue *q);
 
 int blk_dev_init(void);
 
-void elv_quisce_start(struct request_queue *q);
-void elv_quisce_end(struct request_queue *q);
+void elv_quiesce_start(struct request_queue *q);
+void elv_quiesce_end(struct request_queue *q);
 
 
 /*
diff --git a/block/elevator.c b/block/elevator.c
index fb81bcc14a8..7073a907257 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -590,7 +590,7 @@ void elv_drain_elevator(struct request_queue *q)
 /*
  * Call with queue lock held, interrupts disabled
  */
-void elv_quisce_start(struct request_queue *q)
+void elv_quiesce_start(struct request_queue *q)
 {
 	queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
 
@@ -607,7 +607,7 @@ void elv_quisce_start(struct request_queue *q)
 	}
 }
 
-void elv_quisce_end(struct request_queue *q)
+void elv_quiesce_end(struct request_queue *q)
 {
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
 }
@@ -1126,7 +1126,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
 	 * Turn on BYPASS and drain all requests w/ elevator private data
 	 */
 	spin_lock_irq(q->queue_lock);
-	elv_quisce_start(q);
+	elv_quiesce_start(q);
 
 	/*
 	 * Remember old elevator.
@@ -1150,7 +1150,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
 	 */
 	elevator_exit(old_elevator);
 	spin_lock_irq(q->queue_lock);
-	elv_quisce_end(q);
+	elv_quiesce_end(q);
 	spin_unlock_irq(q->queue_lock);
 
 	blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
-- 
GitLab


From 48e70bc18ac81881dedd3aa327c55b924fc41ecf Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Tue, 14 Apr 2009 08:19:27 +0200
Subject: [PATCH 0227/1421] Document and move the various READ/WRITE types

It's a somewhat twisty maze of hints and behavioural modifiers, try
and clear it up a bit with some documentation.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 include/linux/fs.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/include/linux/fs.h b/include/linux/fs.h
index 562d2855cf3..b535aec4406 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -87,6 +87,60 @@ struct inodes_stat_t {
  */
 #define FMODE_NOCMTIME		((__force fmode_t)2048)
 
+/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ *	The block layer uses device plugging to defer IO a little bit, in
+ *	the hope that we will see more IO very shortly. This increases
+ *	coalescing of adjacent IO and thus reduces the number of IOs we
+ *	have to send to the device. It also allows for better queuing,
+ *	if the IO isn't mergeable. If the caller is going to be waiting
+ *	for the IO, then he must ensure that the device is unplugged so
+ *	that the IO is dispatched to the driver.
+ *
+ *	All IO is handled async in Linux. This is fine for background
+ *	writes, but for reads or writes that someone waits for completion
+ *	on, we want to notify the block layer and IO scheduler so that they
+ *	know about it. That allows them to make better scheduling
+ *	decisions. So when the below references 'sync' and 'async', it
+ *	is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ			A normal read operation. Device will be plugged.
+ * READ_SYNC		A synchronous read. Device is not plugged, caller can
+ *			immediately wait on this read without caring about
+ *			unplugging.
+ * READA		Used for read-ahead operations. Lower priority, and the
+ *			 block layer could (in theory) choose to ignore this
+ *			request if it runs into resource problems.
+ * WRITE		A normal async write. Device will be plugged.
+ * SWRITE		Like WRITE, but a special case for ll_rw_block() that
+ *			tells it to lock the buffer first. Normally a buffer
+ *			must be locked before doing IO.
+ * WRITE_SYNC_PLUG	Synchronous write. Identical to WRITE, but passes down
+ *			the hint that someone will be waiting on this IO
+ *			shortly. The device must still be unplugged explicitly,
+ *			WRITE_SYNC_PLUG does not do this as we could be
+ *			submitting more writes before we actually wait on any
+ *			of them.
+ * WRITE_SYNC		Like WRITE_SYNC_PLUG, but also unplugs the device
+ *			immediately after submission. The write equivalent
+ *			of READ_SYNC.
+ * WRITE_ODIRECT	Special case write for O_DIRECT only.
+ * SWRITE_SYNC
+ * SWRITE_SYNC_PLUG	Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
+ *			See SWRITE.
+ * WRITE_BARRIER	Like WRITE, but tells the block layer that all
+ *			previously submitted writes must be safely on storage
+ *			before this one is started. Also guarantees that when
+ *			this write is complete, it itself is also safely on
+ *			storage. Prevents reordering of writes on both sides
+ *			of this IO.
+ *
+ */
 #define RW_MASK		1
 #define RWA_MASK	2
 #define READ 0
@@ -102,6 +156,11 @@ struct inodes_stat_t {
 			(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
 #define SWRITE_SYNC	(SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
 #define WRITE_BARRIER	(WRITE | (1 << BIO_RW_BARRIER))
+
+/*
+ * These aren't really reads or writes, they pass down information about
+ * parts of device that are now unused by the file system.
+ */
 #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
 #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
 
-- 
GitLab


From b0b78f81a5a3bfe9442fcc3a9c13e298a742556a Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 8 Apr 2009 10:56:08 +0200
Subject: [PATCH 0228/1421] cfq-iosched: use rw_is_sync() to see if rw flags
 are sync or not

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index a4809de6fea..f36f8b4d04c 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -2062,7 +2062,7 @@ static int cfq_may_queue(struct request_queue *q, int rw)
 	if (!cic)
 		return ELV_MQUEUE_MAY;
 
-	cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC);
+	cfqq = cic_to_cfqq(cic, rw_is_sync(rw));
 	if (cfqq) {
 		cfq_init_prio_data(cfqq, cic->ioc);
 		cfq_prio_boost(cfqq);
-- 
GitLab


From ff6657c6c8ac99444e5dd4c4f7c1dc9271173382 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 8 Apr 2009 10:58:57 +0200
Subject: [PATCH 0229/1421] cfq-iosched: get rid of private SYNC/ASYNC defines

We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index f36f8b4d04c..cba8a5d91bf 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -56,9 +56,6 @@ static DEFINE_SPINLOCK(ioc_gone_lock);
 #define cfq_class_idle(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
 #define cfq_class_rt(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
 
-#define ASYNC			(0)
-#define SYNC			(1)
-
 #define sample_valid(samples)	((samples) > 80)
 
 /*
@@ -1333,14 +1330,14 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 	if (ioc->ioc_data == cic)
 		rcu_assign_pointer(ioc->ioc_data, NULL);
 
-	if (cic->cfqq[ASYNC]) {
-		cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
-		cic->cfqq[ASYNC] = NULL;
+	if (cic->cfqq[BLK_RW_ASYNC]) {
+		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
+		cic->cfqq[BLK_RW_ASYNC] = NULL;
 	}
 
-	if (cic->cfqq[SYNC]) {
-		cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]);
-		cic->cfqq[SYNC] = NULL;
+	if (cic->cfqq[BLK_RW_SYNC]) {
+		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]);
+		cic->cfqq[BLK_RW_SYNC] = NULL;
 	}
 }
 
@@ -1449,17 +1446,18 @@ static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic)
 
 	spin_lock_irqsave(cfqd->queue->queue_lock, flags);
 
-	cfqq = cic->cfqq[ASYNC];
+	cfqq = cic->cfqq[BLK_RW_ASYNC];
 	if (cfqq) {
 		struct cfq_queue *new_cfqq;
-		new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC);
+		new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc,
+						GFP_ATOMIC);
 		if (new_cfqq) {
-			cic->cfqq[ASYNC] = new_cfqq;
+			cic->cfqq[BLK_RW_ASYNC] = new_cfqq;
 			cfq_put_queue(cfqq);
 		}
 	}
 
-	cfqq = cic->cfqq[SYNC];
+	cfqq = cic->cfqq[BLK_RW_SYNC];
 	if (cfqq)
 		cfq_mark_cfqq_prio_changed(cfqq);
 
-- 
GitLab


From 1d6bfbdf38f37bcc259e7c56c8c73664772651fb Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 8 Apr 2009 11:02:08 +0200
Subject: [PATCH 0230/1421] as-iosched: get rid of private REQ_SYNC/REQ_ASYNC
 defines

We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/as-iosched.c | 116 ++++++++++++++++++++++-----------------------
 1 file changed, 57 insertions(+), 59 deletions(-)

diff --git a/block/as-iosched.c b/block/as-iosched.c
index 631f6f44460..c48fa670d22 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -17,9 +17,6 @@
 #include <linux/rbtree.h>
 #include <linux/interrupt.h>
 
-#define REQ_SYNC	1
-#define REQ_ASYNC	0
-
 /*
  * See Documentation/block/as-iosched.txt
  */
@@ -93,7 +90,7 @@ struct as_data {
 	struct list_head fifo_list[2];
 
 	struct request *next_rq[2];	/* next in sort order */
-	sector_t last_sector[2];	/* last REQ_SYNC & REQ_ASYNC sectors */
+	sector_t last_sector[2];	/* last SYNC & ASYNC sectors */
 
 	unsigned long exit_prob;	/* probability a task will exit while
 					   being waited on */
@@ -109,7 +106,7 @@ struct as_data {
 	unsigned long last_check_fifo[2];
 	int changed_batch;		/* 1: waiting for old batch to end */
 	int new_batch;			/* 1: waiting on first read complete */
-	int batch_data_dir;		/* current batch REQ_SYNC / REQ_ASYNC */
+	int batch_data_dir;		/* current batch SYNC / ASYNC */
 	int write_batch_count;		/* max # of reqs in a write batch */
 	int current_write_count;	/* how many requests left this batch */
 	int write_batch_idled;		/* has the write batch gone idle? */
@@ -554,7 +551,7 @@ static void as_update_iohist(struct as_data *ad, struct as_io_context *aic,
 	if (aic == NULL)
 		return;
 
-	if (data_dir == REQ_SYNC) {
+	if (data_dir == BLK_RW_SYNC) {
 		unsigned long in_flight = atomic_read(&aic->nr_queued)
 					+ atomic_read(&aic->nr_dispatched);
 		spin_lock(&aic->lock);
@@ -811,7 +808,7 @@ static void as_update_rq(struct as_data *ad, struct request *rq)
  */
 static void update_write_batch(struct as_data *ad)
 {
-	unsigned long batch = ad->batch_expire[REQ_ASYNC];
+	unsigned long batch = ad->batch_expire[BLK_RW_ASYNC];
 	long write_time;
 
 	write_time = (jiffies - ad->current_batch_expires) + batch;
@@ -855,7 +852,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq)
 		kblockd_schedule_work(q, &ad->antic_work);
 		ad->changed_batch = 0;
 
-		if (ad->batch_data_dir == REQ_SYNC)
+		if (ad->batch_data_dir == BLK_RW_SYNC)
 			ad->new_batch = 1;
 	}
 	WARN_ON(ad->nr_dispatched == 0);
@@ -869,7 +866,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq)
 	if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) {
 		update_write_batch(ad);
 		ad->current_batch_expires = jiffies +
-				ad->batch_expire[REQ_SYNC];
+				ad->batch_expire[BLK_RW_SYNC];
 		ad->new_batch = 0;
 	}
 
@@ -960,7 +957,7 @@ static inline int as_batch_expired(struct as_data *ad)
 	if (ad->changed_batch || ad->new_batch)
 		return 0;
 
-	if (ad->batch_data_dir == REQ_SYNC)
+	if (ad->batch_data_dir == BLK_RW_SYNC)
 		/* TODO! add a check so a complete fifo gets written? */
 		return time_after(jiffies, ad->current_batch_expires);
 
@@ -986,7 +983,7 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq)
 	 */
 	ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
 
-	if (data_dir == REQ_SYNC) {
+	if (data_dir == BLK_RW_SYNC) {
 		struct io_context *ioc = RQ_IOC(rq);
 		/* In case we have to anticipate after this */
 		copy_io_context(&ad->io_context, &ioc);
@@ -1025,41 +1022,41 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq)
 static int as_dispatch_request(struct request_queue *q, int force)
 {
 	struct as_data *ad = q->elevator->elevator_data;
-	const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
-	const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+	const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]);
+	const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]);
 	struct request *rq;
 
 	if (unlikely(force)) {
 		/*
 		 * Forced dispatch, accounting is useless.  Reset
 		 * accounting states and dump fifo_lists.  Note that
-		 * batch_data_dir is reset to REQ_SYNC to avoid
+		 * batch_data_dir is reset to BLK_RW_SYNC to avoid
 		 * screwing write batch accounting as write batch
 		 * accounting occurs on W->R transition.
 		 */
 		int dispatched = 0;
 
-		ad->batch_data_dir = REQ_SYNC;
+		ad->batch_data_dir = BLK_RW_SYNC;
 		ad->changed_batch = 0;
 		ad->new_batch = 0;
 
-		while (ad->next_rq[REQ_SYNC]) {
-			as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]);
+		while (ad->next_rq[BLK_RW_SYNC]) {
+			as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]);
 			dispatched++;
 		}
-		ad->last_check_fifo[REQ_SYNC] = jiffies;
+		ad->last_check_fifo[BLK_RW_SYNC] = jiffies;
 
-		while (ad->next_rq[REQ_ASYNC]) {
-			as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]);
+		while (ad->next_rq[BLK_RW_ASYNC]) {
+			as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]);
 			dispatched++;
 		}
-		ad->last_check_fifo[REQ_ASYNC] = jiffies;
+		ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
 
 		return dispatched;
 	}
 
 	/* Signal that the write batch was uncontended, so we can't time it */
-	if (ad->batch_data_dir == REQ_ASYNC && !reads) {
+	if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) {
 		if (ad->current_write_count == 0 || !writes)
 			ad->write_batch_idled = 1;
 	}
@@ -1076,8 +1073,8 @@ static int as_dispatch_request(struct request_queue *q, int force)
 		 */
 		rq = ad->next_rq[ad->batch_data_dir];
 
-		if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) {
-			if (as_fifo_expired(ad, REQ_SYNC))
+		if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) {
+			if (as_fifo_expired(ad, BLK_RW_SYNC))
 				goto fifo_expired;
 
 			if (as_can_anticipate(ad, rq)) {
@@ -1090,7 +1087,7 @@ static int as_dispatch_request(struct request_queue *q, int force)
 			/* we have a "next request" */
 			if (reads && !writes)
 				ad->current_batch_expires =
-					jiffies + ad->batch_expire[REQ_SYNC];
+					jiffies + ad->batch_expire[BLK_RW_SYNC];
 			goto dispatch_request;
 		}
 	}
@@ -1101,20 +1098,20 @@ static int as_dispatch_request(struct request_queue *q, int force)
 	 */
 
 	if (reads) {
-		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC]));
+		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC]));
 
-		if (writes && ad->batch_data_dir == REQ_SYNC)
+		if (writes && ad->batch_data_dir == BLK_RW_SYNC)
 			/*
 			 * Last batch was a read, switch to writes
 			 */
 			goto dispatch_writes;
 
-		if (ad->batch_data_dir == REQ_ASYNC) {
+		if (ad->batch_data_dir == BLK_RW_ASYNC) {
 			WARN_ON(ad->new_batch);
 			ad->changed_batch = 1;
 		}
-		ad->batch_data_dir = REQ_SYNC;
-		rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next);
+		ad->batch_data_dir = BLK_RW_SYNC;
+		rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next);
 		ad->last_check_fifo[ad->batch_data_dir] = jiffies;
 		goto dispatch_request;
 	}
@@ -1125,9 +1122,9 @@ static int as_dispatch_request(struct request_queue *q, int force)
 
 	if (writes) {
 dispatch_writes:
-		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC]));
+		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC]));
 
-		if (ad->batch_data_dir == REQ_SYNC) {
+		if (ad->batch_data_dir == BLK_RW_SYNC) {
 			ad->changed_batch = 1;
 
 			/*
@@ -1137,11 +1134,11 @@ dispatch_writes:
 			 */
 			ad->new_batch = 0;
 		}
-		ad->batch_data_dir = REQ_ASYNC;
+		ad->batch_data_dir = BLK_RW_ASYNC;
 		ad->current_write_count = ad->write_batch_count;
 		ad->write_batch_idled = 0;
-		rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next);
-		ad->last_check_fifo[REQ_ASYNC] = jiffies;
+		rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next);
+		ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
 		goto dispatch_request;
 	}
 
@@ -1164,9 +1161,9 @@ fifo_expired:
 		if (ad->nr_dispatched)
 			return 0;
 
-		if (ad->batch_data_dir == REQ_ASYNC)
+		if (ad->batch_data_dir == BLK_RW_ASYNC)
 			ad->current_batch_expires = jiffies +
-					ad->batch_expire[REQ_ASYNC];
+					ad->batch_expire[BLK_RW_ASYNC];
 		else
 			ad->new_batch = 1;
 
@@ -1238,8 +1235,8 @@ static int as_queue_empty(struct request_queue *q)
 {
 	struct as_data *ad = q->elevator->elevator_data;
 
-	return list_empty(&ad->fifo_list[REQ_ASYNC])
-		&& list_empty(&ad->fifo_list[REQ_SYNC]);
+	return list_empty(&ad->fifo_list[BLK_RW_ASYNC])
+		&& list_empty(&ad->fifo_list[BLK_RW_SYNC]);
 }
 
 static int
@@ -1346,8 +1343,8 @@ static void as_exit_queue(struct elevator_queue *e)
 	del_timer_sync(&ad->antic_timer);
 	cancel_work_sync(&ad->antic_work);
 
-	BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC]));
-	BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC]));
+	BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC]));
+	BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC]));
 
 	put_io_context(ad->io_context);
 	kfree(ad);
@@ -1372,18 +1369,18 @@ static void *as_init_queue(struct request_queue *q)
 	init_timer(&ad->antic_timer);
 	INIT_WORK(&ad->antic_work, as_work_handler);
 
-	INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]);
-	INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
-	ad->sort_list[REQ_SYNC] = RB_ROOT;
-	ad->sort_list[REQ_ASYNC] = RB_ROOT;
-	ad->fifo_expire[REQ_SYNC] = default_read_expire;
-	ad->fifo_expire[REQ_ASYNC] = default_write_expire;
+	INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]);
+	INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]);
+	ad->sort_list[BLK_RW_SYNC] = RB_ROOT;
+	ad->sort_list[BLK_RW_ASYNC] = RB_ROOT;
+	ad->fifo_expire[BLK_RW_SYNC] = default_read_expire;
+	ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire;
 	ad->antic_expire = default_antic_expire;
-	ad->batch_expire[REQ_SYNC] = default_read_batch_expire;
-	ad->batch_expire[REQ_ASYNC] = default_write_batch_expire;
+	ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire;
+	ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire;
 
-	ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC];
-	ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10;
+	ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC];
+	ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10;
 	if (ad->write_batch_count < 2)
 		ad->write_batch_count = 2;
 
@@ -1432,11 +1429,11 @@ static ssize_t __FUNC(struct elevator_queue *e, char *page)	\
 	struct as_data *ad = e->elevator_data;			\
 	return as_var_show(jiffies_to_msecs((__VAR)), (page));	\
 }
-SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]);
 SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire);
-SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]);
 #undef SHOW_FUNCTION
 
 #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX)				\
@@ -1451,13 +1448,14 @@ static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count)
 	*(__PTR) = msecs_to_jiffies(*(__PTR));				\
 	return ret;							\
 }
-STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX);
+STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX);
+STORE_FUNCTION(as_write_expire_store,
+			&ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX);
 STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX);
 STORE_FUNCTION(as_read_batch_expire_store,
-			&ad->batch_expire[REQ_SYNC], 0, INT_MAX);
+			&ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX);
 STORE_FUNCTION(as_write_batch_expire_store,
-			&ad->batch_expire[REQ_ASYNC], 0, INT_MAX);
+			&ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX);
 #undef STORE_FUNCTION
 
 #define AS_ATTR(name) \
-- 
GitLab


From 329007ce25d56fc7113df7b4828d607806d8bc21 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 8 Apr 2009 11:38:50 +0200
Subject: [PATCH 0231/1421] block: update biodoc.txt on plugging

We do per-device plugging, get rid of any references to tq_disk as that
has been dead since 2.6.5 or so.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 Documentation/block/biodoc.txt | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index ecad6ee7570..6fab97ea7e6 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1040,23 +1040,21 @@ Front merges are handled by the binary trees in AS and deadline schedulers.
 iii. Plugging the queue to batch requests in anticipation of opportunities for
      merge/sort optimizations
 
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
 Plugging is an approach that the current i/o scheduling algorithm resorts to so
 that it collects up enough requests in the queue to be able to take
 advantage of the sorting/merging logic in the elevator. If the
 queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
 till it fills up with a few more requests, before starting to service
 the requests. This provides an opportunity to merge/sort the requests before
 passing them down to the device. There are various conditions when the queue is
 unplugged (to open up the flow again), either through a scheduled task or
 could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
 
 Aside:
   This is kind of controversial territory, as it's not clear if plugging is
@@ -1067,11 +1065,6 @@ Aside:
   multi-page bios being queued in one shot, we may not need to wait to merge
   a big request from the broken up pieces coming by.
 
-  Per-queue granularity unplugging (still a Todo) may help reduce some of the
-  concerns with just a single tq_disk flush approach. Something like
-  blk_kick_queue() to unplug a specific queue (right away ?)
-  or optionally, all queues, is in the plan.
-
 4.4 I/O contexts
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,
-- 
GitLab


From 053c525fcf976810f023d96472f414c0d5e6339b Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 8 Apr 2009 13:44:08 +0200
Subject: [PATCH 0232/1421] buffer: switch do_emergency_thaw() away from
 pdflush_operation()

This is (again) a preparatory patch similar to commit
a2a9537ac0b37a5da6fbe7e1e9cb06c524d2a9c4. It open codes a simple
async way of executing do_thaw_all() out of context, so we can get
rid of pdflush.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/buffer.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 13edf7ad3ff..ff8bb1f2333 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -547,7 +547,7 @@ repeat:
 	return err;
 }
 
-void do_thaw_all(unsigned long unused)
+void do_thaw_all(struct work_struct *work)
 {
 	struct super_block *sb;
 	char b[BDEVNAME_SIZE];
@@ -567,6 +567,7 @@ restart:
 			goto restart;
 	}
 	spin_unlock(&sb_lock);
+	kfree(work);
 	printk(KERN_WARNING "Emergency Thaw complete\n");
 }
 
@@ -577,7 +578,13 @@ restart:
  */
 void emergency_thaw_all(void)
 {
-	pdflush_operation(do_thaw_all, 0);
+	struct work_struct *work;
+
+	work = kmalloc(sizeof(*work), GFP_ATOMIC);
+	if (work) {
+		INIT_WORK(work, do_thaw_all);
+		schedule_work(work);
+	}
 }
 
 /**
-- 
GitLab


From d6ceb25e8d8bccf826848c2621a50d02c0a7f4ae Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Tue, 14 Apr 2009 14:18:16 +0200
Subject: [PATCH 0233/1421] cfq-iosched: don't delay queue kick for a merged
 request

"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> reports that commit
b029195dda0129b427c6e579a3bb3ae752da3a93 introduced a regression
of about 50% with sequential threaded read workloads. The test
case is:

tiotest -k0 -k1 -k3 -f 80 -t 32

which starts 32 threads each reading a 80MB file. Twiddle the kick
queue logic so that we do start IO immediately, if it appears to be
a fully merged request. We can't really detect that, so just check
if the request is bigger than a page or not. The assumption is that
since single bio issues will first queue a single request with just
one page attached and then later do merges on that, if we already
have more than a page worth of data in the request, then the request
is most likely good to go.

Verified that this doesn't cause a regression with the test case that
commit b029195dda0129b427c6e579a3bb3ae752da3a93 was fixing. It does not,
we still see maximum sized requests for the queue-then-merge cases.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index cba8a5d91bf..56e9d8503cf 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1903,10 +1903,17 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		 * Remember that we saw a request from this process, but
 		 * don't start queuing just yet. Otherwise we risk seeing lots
 		 * of tiny requests, because we disrupt the normal plugging
-		 * and merging.
+		 * and merging. If the request is already larger than a single
+		 * page, let it rip immediately. For that case we assume that
+		 * merging is already done.
 		 */
-		if (cfq_cfqq_wait_request(cfqq))
+		if (cfq_cfqq_wait_request(cfqq)) {
+			if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE) {
+				del_timer(&cfqd->idle_slice_timer);
+				blk_start_queueing(cfqd->queue);
+			}
 			cfq_mark_cfqq_must_dispatch(cfqq);
+		}
 	} else if (cfq_should_preempt(cfqd, cfqq, rq)) {
 		/*
 		 * not the active queue - expire current slice if it is
-- 
GitLab


From 2ec775e7053c82bc90858ede011b35aeb416995b Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Wed, 15 Apr 2009 10:16:24 +0200
Subject: [PATCH 0234/1421] [ALSA] intel8x0: add one retry to the ac97_clock
 measurement routine

It seems that on some hardware platforms, the first measurement is wrong.
This patch adds second measurement to this case.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/intel8x0.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 10f8609e9c6..5dced5b7938 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2676,12 +2676,13 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	struct ichdev *ichdev;
 	unsigned long port;
 	unsigned long pos, pos1, t;
-	int civ, timeout = 1000;
+	int civ, timeout = 1000, attempt = 1;
 	struct timespec start_time, stop_time;
 
 	if (chip->ac97_bus->clock != 48000)
 		return; /* specified in module option */
 
+      __again:
 	subs = chip->pcm[0]->streams[0].substream;
 	if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
 		snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
@@ -2749,6 +2750,11 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 
 	if (pos == 0) {
 		snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+	      __retry:
+		if (attempt < 2) {
+			attempt++;
+			goto __again;
+		}
 		return;
 	}
 
@@ -2759,14 +2765,15 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
 	if (t == 0) {
 		snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
-		return;
+		goto __retry;
 	}
 	pos *= 1000;
 	pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
-	if (pos < 40000 || pos >= 60000) 
+	if (pos < 40000 || pos >= 60000) {
 		/* abnormal value. hw problem? */
 		printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
-	else if (pos > 40500 && pos < 41500)
+		goto __retry;
+	} else if (pos > 40500 && pos < 41500)
 		/* first exception - 41000Hz reference clock */
 		chip->ac97_bus->clock = 41000;
 	else if (pos > 43600 && pos < 44600)
-- 
GitLab


From 41609ff43005de11dadfb0ccadb344f0e2966829 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Tue, 14 Apr 2009 11:06:49 +0100
Subject: [PATCH 0235/1421] [ARM] 5449/1: S3C: Use disable_irq_nosync() to fix
 boot lockups

With 2.6.30-rc1 on SMDK6410 I experience a soft lockup on bootup when
the Samsung serial driver attempts to disable the transmit interrupt
from within the transmit interrupt handler: it calls disable_irq()
which locks up due to attempting to synchronise with the running handler.
Fix this by using disable_irq_nosync().

Also make the same change in the recieve path.

Backtrace:

[<c002a914>] (__irq_svc+0x34/0x80) from [<c00696c0>] (synchr)
[<c00696c0>] (synchronize_irq+0xc/0xcc) from [<c018d434>] (s)
[<c018d434>] (s3c24xx_serial_stop_tx+0x1c/0x3c) from [<c018d)
[<c018d54c>] (s3c24xx_serial_tx_chars+0xf8/0x104) from [<c00)
[<c0068bcc>] (handle_IRQ_event+0x74/0x118) from [<c006ab04>])
[<c006ab04>] (handle_level_irq+0x100/0x118) from [<c00349c4>)
[<c00349c4>] (s3c_irq_demux_uart+0x94/0xc4) from [<c002a050>)
[<c002a050>] (_text+0x50/0x6c) from [<c002a914>] (__irq_svc+)

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/serial/samsung.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 41ac94872b8..e06686ae858 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (tx_enabled(port)) {
-		disable_irq(ourport->tx_irq);
+		disable_irq_nosync(ourport->tx_irq);
 		tx_enabled(port) = 0;
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_enable(port);
@@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
 
 	if (rx_enabled(port)) {
 		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-		disable_irq(ourport->rx_irq);
+		disable_irq_nosync(ourport->rx_irq);
 		rx_enabled(port) = 0;
 	}
 }
-- 
GitLab


From 7fccfc00c003c855936970facdbb667bae9dbe9a Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@nokia.com>
Date: Tue, 14 Apr 2009 13:07:35 +0100
Subject: [PATCH 0236/1421] [ARM] 5450/1: Flush only the needed range when
 unmapping a VMA

When unmapping N pages (e.g. shared memory) the amount of TLB flushes
done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it should be N at
maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8 pages, so there is a
noticeable performance penalty when unmapping a large VMA and the system
is spending its time in flush_tlb_range().

The problem is that tlb_end_vma() is always flushing the full VMA
range. The subrange that needs to be flushed can be calculated by
tlb_remove_tlb_entry(). This approach was suggested by Hugh Dickins,
and is also used by other arches.

The speed increase is roughly 3x for 8M mappings and for larger mappings
even more.

Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/tlb.h | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 857f1dfac79..321c83e43a1 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -36,6 +36,8 @@
 struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
+	unsigned long		range_start;
+	unsigned long		range_end;
 };
 
 DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 	put_cpu_var(mmu_gathers);
 }
 
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
 
 /*
  * In the case of tlb vma handling, we can optimise these away in the
@@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 static inline void
 tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
+	if (!tlb->fullmm) {
 		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
 }
 
 static inline void
 tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+	if (!tlb->fullmm && tlb->range_end > 0)
+		flush_tlb_range(vma, tlb->range_start, tlb->range_end);
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-- 
GitLab


From d5565f76d30a164570d883ab2e77a24b6b8686a0 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 14 Apr 2009 21:38:07 +0100
Subject: [PATCH 0237/1421] [ARM] 5451/1: ep93xx:core.c: build warning fix

Fix trivial build warning due to incompatible pointer type.

ep93xx_timer_interrupt() has the wrong return type causing a
warning during the build.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6d9152de607..ae24486f858 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -100,7 +100,7 @@ static unsigned int last_jiffy_time;
 
 #define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
 
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
 	__raw_writel(1, EP93XX_TIMER1_CLEAR);
 	while ((signed long)
-- 
GitLab


From bfb53037c61ddf7c16a40297ad16f2bcbde534dc Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 14 Apr 2009 14:51:04 +0200
Subject: [PATCH 0238/1421] ALSA: hda - Add quirk mask for Fujitsu Amilo
 laptops with ALC883

Added the models for quirk bitmask 1734:110x and 1734:113x of
Fujitsu laptops.

This will fix the model detection for Amilo Xa3540.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f35e58a2d92..6ed787eedd0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8742,10 +8742,9 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
-	SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
+	SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
 		      ALC883_FUJITSU_PI2515),
-	SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
-	SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+	SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx",
 		ALC888_FUJITSU_XA3530),
 	SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
 	SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
-- 
GitLab


From 7fa5d20d1a5e60ef7e453993b67b26c87dc09f07 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Tue, 31 Mar 2009 15:49:08 +0100
Subject: [PATCH 0239/1421] GFS2: Make quotad's waiting interruptible

So we don't count its D state in the loadavg.

Reported-by: Nathan Straz <nstraz@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/quota.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 8d53f66b5bc..47bc5cbba48 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -1364,7 +1364,7 @@ int gfs2_quotad(void *data)
 			refrigerator();
 		t = min(quotad_timeo, statfs_timeo);
 
-		prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE);
+		prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE);
 		spin_lock(&sdp->sd_trunc_lock);
 		empty = list_empty(&sdp->sd_trunc_list);
 		spin_unlock(&sdp->sd_trunc_lock);
-- 
GitLab


From 5cf32524de745c56e1411d63eccf23fef1709d73 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Tue, 31 Mar 2009 16:06:27 +0100
Subject: [PATCH 0240/1421] GFS2: Fix symlink creation race

In certain cases symlinks can appear to have zero size if a lookup
on the inode occurs within a certain (very short) time after the
symlink has been created. The symlink is correctly created on disk
but appears to have zero size when stat()ed. This patch closes the
race and prevents incorrect sizes appearing.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/ops_inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index abd5429ae28..1c70fa5168d 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -371,6 +371,7 @@ static int gfs2_symlink(struct inode *dir, struct dentry *dentry,
 	ip = ghs[1].gh_gl->gl_object;
 
 	ip->i_disksize = size;
+	i_size_write(inode, size);
 
 	error = gfs2_meta_inode_buffer(ip, &dibh);
 
-- 
GitLab


From a228df6339e0d385b8149c860d81b6007f5e9c81 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Tue, 7 Apr 2009 14:01:34 +0100
Subject: [PATCH 0241/1421] GFS2: Move umount flush rwsem

The rwsem, used only on umount, is in the wrong place in glock.c.
This patch moves it up a bit so that it does not get called under
a spinlock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/glock.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 3984e47d1d3..1afd9f26bcb 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -597,7 +597,6 @@ __acquires(&gl->gl_spin)
 
 	GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
 
-	down_read(&gfs2_umount_flush_sem);
 	if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
 	    gl->gl_demote_state != gl->gl_state) {
 		if (find_first_holder(gl))
@@ -614,15 +613,14 @@ __acquires(&gl->gl_spin)
 		if (ret == 0)
 			goto out_unlock;
 		if (ret == 2)
-			goto out_sem;
+			goto out;
 		gh = find_first_waiter(gl);
 		gl->gl_target = gh->gh_state;
 		if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
 			do_error(gl, 0); /* Fail queued try locks */
 	}
 	do_xmote(gl, gh, gl->gl_target);
-out_sem:
-	up_read(&gfs2_umount_flush_sem);
+out:
 	return;
 
 out_sched:
@@ -631,7 +629,7 @@ out_sched:
 		gfs2_glock_put(gl);
 out_unlock:
 	clear_bit(GLF_LOCK, &gl->gl_flags);
-	goto out_sem;
+	goto out;
 }
 
 static void glock_work_func(struct work_struct *work)
@@ -641,6 +639,7 @@ static void glock_work_func(struct work_struct *work)
 
 	if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags))
 		finish_xmote(gl, gl->gl_reply);
+	down_read(&gfs2_umount_flush_sem);
 	spin_lock(&gl->gl_spin);
 	if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
 	    gl->gl_state != LM_ST_UNLOCKED &&
@@ -653,6 +652,7 @@ static void glock_work_func(struct work_struct *work)
 	}
 	run_queue(gl, 0);
 	spin_unlock(&gl->gl_spin);
+	up_read(&gfs2_umount_flush_sem);
 	if (!delay ||
 	    queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
 		gfs2_glock_put(gl);
-- 
GitLab


From 10d2198805d7faa2b193485446ff6b1de42c9b78 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 7 Apr 2009 19:42:17 +0200
Subject: [PATCH 0242/1421] GFS2: cleanup file_operations mess

Remove the weird pointer to file_operations mess and replace it with
straight-forward defining of the lockinginstance names to the _nolock
variants.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/inode.c    |  8 ++++----
 fs/gfs2/inode.h    | 14 ++++++++------
 fs/gfs2/ops_file.c |  8 ++++----
 3 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 7b277d44915..5a31d426116 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -137,15 +137,15 @@ void gfs2_set_iop(struct inode *inode)
 	if (S_ISREG(mode)) {
 		inode->i_op = &gfs2_file_iops;
 		if (gfs2_localflocks(sdp))
-			inode->i_fop = gfs2_file_fops_nolock;
+			inode->i_fop = &gfs2_file_fops_nolock;
 		else
-			inode->i_fop = gfs2_file_fops;
+			inode->i_fop = &gfs2_file_fops;
 	} else if (S_ISDIR(mode)) {
 		inode->i_op = &gfs2_dir_iops;
 		if (gfs2_localflocks(sdp))
-			inode->i_fop = gfs2_dir_fops_nolock;
+			inode->i_fop = &gfs2_dir_fops_nolock;
 		else
-			inode->i_fop = gfs2_dir_fops;
+			inode->i_fop = &gfs2_dir_fops;
 	} else if (S_ISLNK(mode)) {
 		inode->i_op = &gfs2_symlink_iops;
 	} else {
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index dca4fee3078..c30be2b6658 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -101,21 +101,23 @@ void gfs2_dinode_print(const struct gfs2_inode *ip);
 extern const struct inode_operations gfs2_file_iops;
 extern const struct inode_operations gfs2_dir_iops;
 extern const struct inode_operations gfs2_symlink_iops;
-extern const struct file_operations *gfs2_file_fops_nolock;
-extern const struct file_operations *gfs2_dir_fops_nolock;
+extern const struct file_operations gfs2_file_fops_nolock;
+extern const struct file_operations gfs2_dir_fops_nolock;
 
 extern void gfs2_set_inode_flags(struct inode *inode);
  
 #ifdef CONFIG_GFS2_FS_LOCKING_DLM
-extern const struct file_operations *gfs2_file_fops;
-extern const struct file_operations *gfs2_dir_fops;
+extern const struct file_operations gfs2_file_fops;
+extern const struct file_operations gfs2_dir_fops;
+
 static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
 {
 	return sdp->sd_args.ar_localflocks;
 }
 #else /* Single node only */
-#define gfs2_file_fops NULL
-#define gfs2_dir_fops NULL
+#define gfs2_file_fops gfs2_file_fops_nolock
+#define gfs2_dir_fops gfs2_dir_fops_nolock
+
 static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
 {
 	return 1;
diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c
index 70b9b854894..101caf3ee86 100644
--- a/fs/gfs2/ops_file.c
+++ b/fs/gfs2/ops_file.c
@@ -705,7 +705,7 @@ static int gfs2_flock(struct file *file, int cmd, struct file_lock *fl)
 	}
 }
 
-const struct file_operations *gfs2_file_fops = &(const struct file_operations){
+const struct file_operations gfs2_file_fops = {
 	.llseek		= gfs2_llseek,
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
@@ -723,7 +723,7 @@ const struct file_operations *gfs2_file_fops = &(const struct file_operations){
 	.setlease	= gfs2_setlease,
 };
 
-const struct file_operations *gfs2_dir_fops = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops = {
 	.readdir	= gfs2_readdir,
 	.unlocked_ioctl	= gfs2_ioctl,
 	.open		= gfs2_open,
@@ -735,7 +735,7 @@ const struct file_operations *gfs2_dir_fops = &(const struct file_operations){
 
 #endif /* CONFIG_GFS2_FS_LOCKING_DLM */
 
-const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_file_fops_nolock = {
 	.llseek		= gfs2_llseek,
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
@@ -751,7 +751,7 @@ const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operat
 	.setlease	= generic_setlease,
 };
 
-const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops_nolock = {
 	.readdir	= gfs2_readdir,
 	.unlocked_ioctl	= gfs2_ioctl,
 	.open		= gfs2_open,
-- 
GitLab


From 1328df725239804ae30fc7257c1a3185e679b517 Mon Sep 17 00:00:00 2001
From: Xu Gang <xug@cn.fujitsu.com>
Date: Tue, 14 Apr 2009 14:54:14 +0800
Subject: [PATCH 0243/1421] GFS2: Use DEFINE_SPINLOCK

SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead.
(as suggested in Documentation/spinlocks.txt)

Signed-off-by: Xu Gang <xug@cn.fujitsu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/quota.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 47bc5cbba48..152e6c4a0dc 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -81,7 +81,7 @@ struct gfs2_quota_change_host {
 
 static LIST_HEAD(qd_lru_list);
 static atomic_t qd_lru_count = ATOMIC_INIT(0);
-static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(qd_lru_lock);
 
 int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
 {
-- 
GitLab


From 83b2086ce2a1458168dc8b9d624060b2d7a82d4c Mon Sep 17 00:00:00 2001
From: Justin Mattock <justinmattock@gmail.com>
Date: Tue, 14 Apr 2009 14:31:21 -0700
Subject: [PATCH 0244/1421] ALSA: add missing definitions(letters) to
 HD-Audio.txt

impact: Add missing definitions(letters).

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 Documentation/sound/alsa/HD-Audio.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index c5948f2f9a2..88b7433d2f1 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -169,7 +169,7 @@ PCI SSID look-up.
 What `model` option values are available depends on the codec chip.
 Check your codec chip from the codec proc file (see "Codec Proc-File"
 section below).  It will show the vendor/product name of your codec
-chip.  Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+chip.  Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
 the section of HD-audio driver.  You can find a list of codecs
 and `model` options belonging to each codec.  For example, for Realtek
 ALC262 codec chip, pass `model=ultra` for devices that are compatible
@@ -177,7 +177,7 @@ with Samsung Q1 Ultra.
 
 Thus, the first thing you can do for any brand-new, unsupported and
 non-working HD-audio hardware is to check HD-audio codec and several
-different `model` option values.  If you have a luck, some of them
+different `model` option values.  If you have any luck, some of them
 might suit with your device well.
 
 Some codecs such as ALC880 have a special model option `model=test`.
-- 
GitLab


From ed247e12fe5da4417602c3c0ce22932fb0f9cac1 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yjwei@cn.fujitsu.com>
Date: Wed, 15 Apr 2009 03:04:56 -0700
Subject: [PATCH 0245/1421] sparc: remove some pointless conditionals before
 kfree()

Remove some pointless conditionals before kfree().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/ldc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 6ce5d2598a0..adf5f273868 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1183,8 +1183,7 @@ out_free_txq:
 	free_queue(lp->tx_num_entries, lp->tx_base);
 
 out_free_mssbuf:
-	if (mssbuf)
-		kfree(mssbuf);
+	kfree(mssbuf);
 
 out_free_iommu:
 	ldc_iommu_release(lp);
@@ -1217,8 +1216,7 @@ void ldc_free(struct ldc_channel *lp)
 
 	hlist_del(&lp->list);
 
-	if (lp->mssbuf)
-		kfree(lp->mssbuf);
+	kfree(lp->mssbuf);
 
 	ldc_iommu_release(lp);
 
-- 
GitLab


From 91e463c8f5f7a5b09d3d034c01a88567af60c504 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 13 Apr 2009 20:03:10 +0200
Subject: [PATCH 0246/1421] block: fix SG_IO to return a proper error value

blk_rq_unmap_user() returns -EFAULT if a program passes an invalid
address to kernel. SG_IO path needs to pass the returned value to user
space instead of ignoring it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/scsi_ioctl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 626ee274c5c..84b7f8709f4 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -217,7 +217,7 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
 				 struct bio *bio)
 {
-	int ret = 0;
+	int r, ret = 0;
 
 	/*
 	 * fill in all the output members
@@ -242,7 +242,9 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
 			ret = -EFAULT;
 	}
 
-	blk_rq_unmap_user(bio);
+	r = blk_rq_unmap_user(bio);
+	if (!ret)
+		ret = r;
 	blk_put_request(rq);
 
 	return ret;
-- 
GitLab


From b3c2d2ddd63944ef2a1e4a43077b602288107e01 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 14 Apr 2009 19:48:36 +0200
Subject: [PATCH 0247/1421] splice: split up __splice_from_pipe()

Split up __splice_from_pipe() into four helper functions:

  splice_from_pipe_begin()
  splice_from_pipe_next()
  splice_from_pipe_feed()
  splice_from_pipe_end()

splice_from_pipe_next() will wait (if necessary) for more buffers to
be added to the pipe.  splice_from_pipe_feed() will feed the buffers
to the supplied actor and return when there's no more data available
(or if all of the requested data has been copied).

This is necessary so that implementations can do locking around the
non-waiting splice_from_pipe_feed().

This patch should not cause any change in behavior.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/splice.c            | 217 +++++++++++++++++++++++++++--------------
 include/linux/splice.h |  10 ++
 2 files changed, 153 insertions(+), 74 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index c18aa7e03e2..fd6b278d447 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -601,107 +601,176 @@ out:
 	return ret;
 }
 
+static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
+{
+	smp_mb();
+	if (waitqueue_active(&pipe->wait))
+		wake_up_interruptible(&pipe->wait);
+	kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
+}
+
 /**
- * __splice_from_pipe - splice data from a pipe to given actor
+ * splice_from_pipe_feed - feed available data from a pipe to a file
  * @pipe:	pipe to splice from
  * @sd:		information to @actor
  * @actor:	handler that splices the data
  *
  * Description:
- *    This function does little more than loop over the pipe and call
- *    @actor to do the actual moving of a single struct pipe_buffer to
- *    the desired destination. See pipe_to_file, pipe_to_sendpage, or
- *    pipe_to_user.
+
+ *    This function loops over the pipe and calls @actor to do the
+ *    actual moving of a single struct pipe_buffer to the desired
+ *    destination.  It returns when there's no more buffers left in
+ *    the pipe or if the requested number of bytes (@sd->total_len)
+ *    have been copied.  It returns a positive number (one) if the
+ *    pipe needs to be filled with more data, zero if the required
+ *    number of bytes have been copied and -errno on error.
  *
+ *    This, together with splice_from_pipe_{begin,end,next}, may be
+ *    used to implement the functionality of __splice_from_pipe() when
+ *    locking is required around copying the pipe buffers to the
+ *    destination.
  */
-ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
-			   splice_actor *actor)
+int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
+			  splice_actor *actor)
 {
-	int ret, do_wakeup, err;
-
-	ret = 0;
-	do_wakeup = 0;
-
-	for (;;) {
-		if (pipe->nrbufs) {
-			struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
-			const struct pipe_buf_operations *ops = buf->ops;
+	int ret;
 
-			sd->len = buf->len;
-			if (sd->len > sd->total_len)
-				sd->len = sd->total_len;
+	while (pipe->nrbufs) {
+		struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
+		const struct pipe_buf_operations *ops = buf->ops;
 
-			err = actor(pipe, buf, sd);
-			if (err <= 0) {
-				if (!ret && err != -ENODATA)
-					ret = err;
+		sd->len = buf->len;
+		if (sd->len > sd->total_len)
+			sd->len = sd->total_len;
 
-				break;
-			}
+		ret = actor(pipe, buf, sd);
+		if (ret <= 0) {
+			if (ret == -ENODATA)
+				ret = 0;
+			return ret;
+		}
+		buf->offset += ret;
+		buf->len -= ret;
 
-			ret += err;
-			buf->offset += err;
-			buf->len -= err;
+		sd->num_spliced += ret;
+		sd->len -= ret;
+		sd->pos += ret;
+		sd->total_len -= ret;
 
-			sd->len -= err;
-			sd->pos += err;
-			sd->total_len -= err;
-			if (sd->len)
-				continue;
+		if (!buf->len) {
+			buf->ops = NULL;
+			ops->release(pipe, buf);
+			pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
+			pipe->nrbufs--;
+			if (pipe->inode)
+				sd->need_wakeup = true;
+		}
 
-			if (!buf->len) {
-				buf->ops = NULL;
-				ops->release(pipe, buf);
-				pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
-				pipe->nrbufs--;
-				if (pipe->inode)
-					do_wakeup = 1;
-			}
+		if (!sd->total_len)
+			return 0;
+	}
 
-			if (!sd->total_len)
-				break;
-		}
+	return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_feed);
 
-		if (pipe->nrbufs)
-			continue;
+/**
+ * splice_from_pipe_next - wait for some data to splice from
+ * @pipe:	pipe to splice from
+ * @sd:		information about the splice operation
+ *
+ * Description:
+ *    This function will wait for some data and return a positive
+ *    value (one) if pipe buffers are available.  It will return zero
+ *    or -errno if no more data needs to be spliced.
+ */
+int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+	while (!pipe->nrbufs) {
 		if (!pipe->writers)
-			break;
-		if (!pipe->waiting_writers) {
-			if (ret)
-				break;
-		}
+			return 0;
 
-		if (sd->flags & SPLICE_F_NONBLOCK) {
-			if (!ret)
-				ret = -EAGAIN;
-			break;
-		}
+		if (!pipe->waiting_writers && sd->num_spliced)
+			return 0;
 
-		if (signal_pending(current)) {
-			if (!ret)
-				ret = -ERESTARTSYS;
-			break;
-		}
+		if (sd->flags & SPLICE_F_NONBLOCK)
+			return -EAGAIN;
 
-		if (do_wakeup) {
-			smp_mb();
-			if (waitqueue_active(&pipe->wait))
-				wake_up_interruptible_sync(&pipe->wait);
-			kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
-			do_wakeup = 0;
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		if (sd->need_wakeup) {
+			wakeup_pipe_writers(pipe);
+			sd->need_wakeup = false;
 		}
 
 		pipe_wait(pipe);
 	}
 
-	if (do_wakeup) {
-		smp_mb();
-		if (waitqueue_active(&pipe->wait))
-			wake_up_interruptible(&pipe->wait);
-		kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
-	}
+	return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_next);
 
-	return ret;
+/**
+ * splice_from_pipe_begin - start splicing from pipe
+ * @pipe:	pipe to splice from
+ *
+ * Description:
+ *    This function should be called before a loop containing
+ *    splice_from_pipe_next() and splice_from_pipe_feed() to
+ *    initialize the necessary fields of @sd.
+ */
+void splice_from_pipe_begin(struct splice_desc *sd)
+{
+	sd->num_spliced = 0;
+	sd->need_wakeup = false;
+}
+EXPORT_SYMBOL(splice_from_pipe_begin);
+
+/**
+ * splice_from_pipe_end - finish splicing from pipe
+ * @pipe:	pipe to splice from
+ * @sd:		information about the splice operation
+ *
+ * Description:
+ *    This function will wake up pipe writers if necessary.  It should
+ *    be called after a loop containing splice_from_pipe_next() and
+ *    splice_from_pipe_feed().
+ */
+void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+	if (sd->need_wakeup)
+		wakeup_pipe_writers(pipe);
+}
+EXPORT_SYMBOL(splice_from_pipe_end);
+
+/**
+ * __splice_from_pipe - splice data from a pipe to given actor
+ * @pipe:	pipe to splice from
+ * @sd:		information to @actor
+ * @actor:	handler that splices the data
+ *
+ * Description:
+ *    This function does little more than loop over the pipe and call
+ *    @actor to do the actual moving of a single struct pipe_buffer to
+ *    the desired destination. See pipe_to_file, pipe_to_sendpage, or
+ *    pipe_to_user.
+ *
+ */
+ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
+			   splice_actor *actor)
+{
+	int ret;
+
+	splice_from_pipe_begin(sd);
+	do {
+		ret = splice_from_pipe_next(pipe, sd);
+		if (ret > 0)
+			ret = splice_from_pipe_feed(pipe, sd, actor);
+	} while (ret > 0);
+	splice_from_pipe_end(pipe, sd);
+
+	return sd->num_spliced ? sd->num_spliced : ret;
 }
 EXPORT_SYMBOL(__splice_from_pipe);
 
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 528dcb93c2f..8fc2a635586 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -36,6 +36,8 @@ struct splice_desc {
 		void *data;		/* cookie */
 	} u;
 	loff_t pos;			/* file position */
+	size_t num_spliced;		/* number of bytes already spliced */
+	bool need_wakeup;		/* need to wake up writer */
 };
 
 struct partial_page {
@@ -66,6 +68,14 @@ extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *,
 				splice_actor *);
 extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
 				  struct splice_desc *, splice_actor *);
+extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
+				 splice_actor *);
+extern int splice_from_pipe_next(struct pipe_inode_info *,
+				 struct splice_desc *);
+extern void splice_from_pipe_begin(struct splice_desc *);
+extern void splice_from_pipe_end(struct pipe_inode_info *,
+				 struct splice_desc *);
+
 extern ssize_t splice_to_pipe(struct pipe_inode_info *,
 			      struct splice_pipe_desc *);
 extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
-- 
GitLab


From 2933970b960223076d6affcf7a77e2bc546b8102 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 14 Apr 2009 19:48:37 +0200
Subject: [PATCH 0248/1421] splice: remove i_mutex locking in
 splice_from_pipe()

splice_from_pipe() is only called from two places:

  - generic_splice_sendpage()
  - splice_write_null()

Neither of these require i_mutex to be taken on the destination inode.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/splice.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index fd6b278d447..349576b2c75 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -784,7 +784,7 @@ EXPORT_SYMBOL(__splice_from_pipe);
  * @actor:	handler that splices the data
  *
  * Description:
- *    See __splice_from_pipe. This function locks the input and output inodes,
+ *    See __splice_from_pipe. This function locks the pipe inode,
  *    otherwise it's identical to __splice_from_pipe().
  *
  */
@@ -793,7 +793,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 			 splice_actor *actor)
 {
 	ssize_t ret;
-	struct inode *inode = out->f_mapping->host;
 	struct splice_desc sd = {
 		.total_len = len,
 		.flags = flags,
@@ -801,24 +800,11 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 		.u.file = out,
 	};
 
-	/*
-	 * The actor worker might be calling ->write_begin and
-	 * ->write_end. Most of the time, these expect i_mutex to
-	 * be held. Since this may result in an ABBA deadlock with
-	 * pipe->inode, we have to order lock acquiry here.
-	 *
-	 * Outer lock must be inode->i_mutex, as pipe_wait() will
-	 * release and reacquire pipe->inode->i_mutex, AND inode must
-	 * never be a pipe.
-	 */
-	WARN_ON(S_ISFIFO(inode->i_mode));
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
 	if (pipe->inode)
-		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
+		mutex_lock(&pipe->inode->i_mutex);
 	ret = __splice_from_pipe(pipe, &sd, actor);
 	if (pipe->inode)
 		mutex_unlock(&pipe->inode->i_mutex);
-	mutex_unlock(&inode->i_mutex);
 
 	return ret;
 }
-- 
GitLab


From eb443e5a25d43996deb62b9bcee1a4ce5dea2ead Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 14 Apr 2009 19:48:38 +0200
Subject: [PATCH 0249/1421] splice: fix i_mutex locking in
 generic_splice_write()

Rearrange locking of i_mutex on destination so it's only held while
buffers are copied with the pipe_to_file() actor, and not while
waiting for more data on the pipe.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/splice.c | 34 +++++++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 11 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 349576b2c75..a1f595b9db4 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -895,17 +895,29 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	};
 	ssize_t ret;
 
-	WARN_ON(S_ISFIFO(inode->i_mode));
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
-	ret = file_remove_suid(out);
-	if (likely(!ret)) {
-		if (pipe->inode)
-			mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
-		ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
-		if (pipe->inode)
-			mutex_unlock(&pipe->inode->i_mutex);
-	}
-	mutex_unlock(&inode->i_mutex);
+	if (pipe->inode)
+		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
+
+	splice_from_pipe_begin(&sd);
+	do {
+		ret = splice_from_pipe_next(pipe, &sd);
+		if (ret <= 0)
+			break;
+
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+		ret = file_remove_suid(out);
+		if (!ret)
+			ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);
+		mutex_unlock(&inode->i_mutex);
+	} while (ret > 0);
+	splice_from_pipe_end(pipe, &sd);
+
+	if (pipe->inode)
+		mutex_unlock(&pipe->inode->i_mutex);
+
+	if (sd.num_spliced)
+		ret = sd.num_spliced;
+
 	if (ret > 0) {
 		unsigned long nr_pages;
 
-- 
GitLab


From 328eaaba4e41a04c1dc4679d65bea3fee4349d86 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 14 Apr 2009 19:48:39 +0200
Subject: [PATCH 0250/1421] ocfs2: fix i_mutex locking in
 ocfs2_splice_to_file()

Rearrange locking of i_mutex on destination and call to
ocfs2_rw_lock() so locks are only held while buffers are copied with
the pipe_to_file() actor, and not while waiting for more data on the
pipe.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/ocfs2/file.c        | 94 +++++++++++++++++++++++++++++++++---------
 fs/splice.c            |  5 ++-
 include/linux/splice.h |  2 +
 3 files changed, 79 insertions(+), 22 deletions(-)

diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8672b953603..c2a87c885b7 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1912,6 +1912,22 @@ out_sems:
 	return written ? written : ret;
 }
 
+static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
+				struct file *out,
+				struct splice_desc *sd)
+{
+	int ret;
+
+	ret = ocfs2_prepare_inode_for_write(out->f_path.dentry,	&sd->pos,
+					    sd->total_len, 0, NULL);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
+	}
+
+	return splice_from_pipe_feed(pipe, sd, pipe_to_file);
+}
+
 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 				       struct file *out,
 				       loff_t *ppos,
@@ -1919,38 +1935,76 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 				       unsigned int flags)
 {
 	int ret;
-	struct inode *inode = out->f_path.dentry->d_inode;
+	struct address_space *mapping = out->f_mapping;
+	struct inode *inode = mapping->host;
+	struct splice_desc sd = {
+		.total_len = len,
+		.flags = flags,
+		.pos = *ppos,
+		.u.file = out,
+	};
 
 	mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
 		   (unsigned int)len,
 		   out->f_path.dentry->d_name.len,
 		   out->f_path.dentry->d_name.name);
 
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
+	if (pipe->inode)
+		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
 
-	ret = ocfs2_rw_lock(inode, 1);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out;
-	}
+	splice_from_pipe_begin(&sd);
+	do {
+		ret = splice_from_pipe_next(pipe, &sd);
+		if (ret <= 0)
+			break;
 
-	ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
-					    NULL);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out_unlock;
-	}
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+		ret = ocfs2_rw_lock(inode, 1);
+		if (ret < 0)
+			mlog_errno(ret);
+		else {
+			ret = ocfs2_splice_to_file(pipe, out, &sd);
+			ocfs2_rw_unlock(inode, 1);
+		}
+		mutex_unlock(&inode->i_mutex);
+	} while (ret > 0);
+	splice_from_pipe_end(pipe, &sd);
 
-	if (pipe->inode)
-		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
-	ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags);
 	if (pipe->inode)
 		mutex_unlock(&pipe->inode->i_mutex);
 
-out_unlock:
-	ocfs2_rw_unlock(inode, 1);
-out:
-	mutex_unlock(&inode->i_mutex);
+	if (sd.num_spliced)
+		ret = sd.num_spliced;
+
+	if (ret > 0) {
+		unsigned long nr_pages;
+
+		*ppos += ret;
+		nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+		/*
+		 * If file or inode is SYNC and we actually wrote some data,
+		 * sync it.
+		 */
+		if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+			int err;
+
+			mutex_lock(&inode->i_mutex);
+			err = ocfs2_rw_lock(inode, 1);
+			if (err < 0) {
+				mlog_errno(err);
+			} else {
+				err = generic_osync_inode(inode, mapping,
+						  OSYNC_METADATA|OSYNC_DATA);
+				ocfs2_rw_unlock(inode, 1);
+			}
+			mutex_unlock(&inode->i_mutex);
+
+			if (err)
+				ret = err;
+		}
+		balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
+	}
 
 	mlog_exit(ret);
 	return ret;
diff --git a/fs/splice.c b/fs/splice.c
index a1f595b9db4..584b2b7a1db 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -555,8 +555,8 @@ static int pipe_to_sendpage(struct pipe_inode_info *pipe,
  * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
  * a new page in the output file page cache and fill/dirty that.
  */
-static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
-			struct splice_desc *sd)
+int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+		 struct splice_desc *sd)
 {
 	struct file *file = sd->u.file;
 	struct address_space *mapping = file->f_mapping;
@@ -600,6 +600,7 @@ static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 out:
 	return ret;
 }
+EXPORT_SYMBOL(pipe_to_file);
 
 static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
 {
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 8fc2a635586..5f3faa9d15a 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -75,6 +75,8 @@ extern int splice_from_pipe_next(struct pipe_inode_info *,
 extern void splice_from_pipe_begin(struct splice_desc *);
 extern void splice_from_pipe_end(struct pipe_inode_info *,
 				 struct splice_desc *);
+extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
+			struct splice_desc *);
 
 extern ssize_t splice_to_pipe(struct pipe_inode_info *,
 			      struct splice_pipe_desc *);
-- 
GitLab


From f8cc774ce4844811a55e2352f1443055e3994e28 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 14 Apr 2009 19:48:40 +0200
Subject: [PATCH 0251/1421] splice: remove generic_file_splice_write_nolock()

Remove the now unused generic_file_splice_write_nolock() function.
It's conceptually broken anyway, because splice may need to wait for
pipe events so holding locks across the whole operation is wrong.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/splice.c        | 59 ----------------------------------------------
 include/linux/fs.h |  2 --
 2 files changed, 61 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 584b2b7a1db..128ee36a719 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -810,65 +810,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 	return ret;
 }
 
-/**
- * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
- * @pipe:	pipe info
- * @out:	file to write to
- * @ppos:	position in @out
- * @len:	number of bytes to splice
- * @flags:	splice modifier flags
- *
- * Description:
- *    Will either move or copy pages (determined by @flags options) from
- *    the given pipe inode to the given file. The caller is responsible
- *    for acquiring i_mutex on both inodes.
- *
- */
-ssize_t
-generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
-				 loff_t *ppos, size_t len, unsigned int flags)
-{
-	struct address_space *mapping = out->f_mapping;
-	struct inode *inode = mapping->host;
-	struct splice_desc sd = {
-		.total_len = len,
-		.flags = flags,
-		.pos = *ppos,
-		.u.file = out,
-	};
-	ssize_t ret;
-	int err;
-
-	err = file_remove_suid(out);
-	if (unlikely(err))
-		return err;
-
-	ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
-	if (ret > 0) {
-		unsigned long nr_pages;
-
-		*ppos += ret;
-		nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-
-		/*
-		 * If file or inode is SYNC and we actually wrote some data,
-		 * sync it.
-		 */
-		if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
-			err = generic_osync_inode(inode, mapping,
-						  OSYNC_METADATA|OSYNC_DATA);
-
-			if (err)
-				ret = err;
-		}
-		balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
-	}
-
-	return ret;
-}
-
-EXPORT_SYMBOL(generic_file_splice_write_nolock);
-
 /**
  * generic_file_splice_write - splice data from a pipe to a file
  * @pipe:	pipe info
diff --git a/include/linux/fs.h b/include/linux/fs.h
index b535aec4406..907d8f56c6f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2209,8 +2209,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *,
 		struct pipe_inode_info *, size_t, unsigned int);
 extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
 		struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *,
-		struct file *, loff_t *, size_t, unsigned int);
 extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
 		struct file *out, loff_t *, size_t len, unsigned int flags);
 extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
-- 
GitLab


From 61e0d47c33cc371f725bcda4a47ae0efe652dba8 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <miklos@szeredi.hu>
Date: Tue, 14 Apr 2009 19:48:41 +0200
Subject: [PATCH 0252/1421] splice: add helpers for locking pipe inode

There are lots of sequences like this, especially in splice code:

	if (pipe->inode)
		mutex_lock(&pipe->inode->i_mutex);
	/* do something */
	if (pipe->inode)
		mutex_unlock(&pipe->inode->i_mutex);

so introduce helpers which do the conditional locking and unlocking.
Also replace the inode_double_lock() call with a pipe_double_lock()
helper to avoid spreading the use of this functionality beyond the
pipe code.

This patch is just a cleanup, and should cause no behavioral changes.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/inode.c                | 36 ----------------------------
 fs/pipe.c                 | 42 ++++++++++++++++++++++++++++----
 fs/splice.c               | 50 ++++++++++++++++-----------------------
 include/linux/fs.h        |  3 ---
 include/linux/pipe_fs_i.h |  5 ++++
 5 files changed, 64 insertions(+), 72 deletions(-)

diff --git a/fs/inode.c b/fs/inode.c
index d06d6d268de..6ad14a1cd8c 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1470,42 +1470,6 @@ static void __wait_on_freeing_inode(struct inode *inode)
 	spin_lock(&inode_lock);
 }
 
-/*
- * We rarely want to lock two inodes that do not have a parent/child
- * relationship (such as directory, child inode) simultaneously. The
- * vast majority of file systems should be able to get along fine
- * without this. Do not use these functions except as a last resort.
- */
-void inode_double_lock(struct inode *inode1, struct inode *inode2)
-{
-	if (inode1 == NULL || inode2 == NULL || inode1 == inode2) {
-		if (inode1)
-			mutex_lock(&inode1->i_mutex);
-		else if (inode2)
-			mutex_lock(&inode2->i_mutex);
-		return;
-	}
-
-	if (inode1 < inode2) {
-		mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT);
-		mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD);
-	} else {
-		mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT);
-		mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD);
-	}
-}
-EXPORT_SYMBOL(inode_double_lock);
-
-void inode_double_unlock(struct inode *inode1, struct inode *inode2)
-{
-	if (inode1)
-		mutex_unlock(&inode1->i_mutex);
-
-	if (inode2 && inode2 != inode1)
-		mutex_unlock(&inode2->i_mutex);
-}
-EXPORT_SYMBOL(inode_double_unlock);
-
 static __initdata unsigned long ihash_entries;
 static int __init set_ihash_entries(char *str)
 {
diff --git a/fs/pipe.c b/fs/pipe.c
index 4af7aa52181..13414ec45b8 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -37,6 +37,42 @@
  * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
  */
 
+static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
+{
+	if (pipe->inode)
+		mutex_lock_nested(&pipe->inode->i_mutex, subclass);
+}
+
+void pipe_lock(struct pipe_inode_info *pipe)
+{
+	/*
+	 * pipe_lock() nests non-pipe inode locks (for writing to a file)
+	 */
+	pipe_lock_nested(pipe, I_MUTEX_PARENT);
+}
+EXPORT_SYMBOL(pipe_lock);
+
+void pipe_unlock(struct pipe_inode_info *pipe)
+{
+	if (pipe->inode)
+		mutex_unlock(&pipe->inode->i_mutex);
+}
+EXPORT_SYMBOL(pipe_unlock);
+
+void pipe_double_lock(struct pipe_inode_info *pipe1,
+		      struct pipe_inode_info *pipe2)
+{
+	BUG_ON(pipe1 == pipe2);
+
+	if (pipe1 < pipe2) {
+		pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+		pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+	} else {
+		pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+		pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+	}
+}
+
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe)
 {
@@ -47,12 +83,10 @@ void pipe_wait(struct pipe_inode_info *pipe)
 	 * is considered a noninteractive wait:
 	 */
 	prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE);
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 	schedule();
 	finish_wait(&pipe->wait, &wait);
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 }
 
 static int
diff --git a/fs/splice.c b/fs/splice.c
index 128ee36a719..5384a90665d 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -182,8 +182,7 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
 	do_wakeup = 0;
 	page_nr = 0;
 
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	for (;;) {
 		if (!pipe->readers) {
@@ -245,15 +244,13 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
 		pipe->waiting_writers--;
 	}
 
-	if (pipe->inode) {
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 
-		if (do_wakeup) {
-			smp_mb();
-			if (waitqueue_active(&pipe->wait))
-				wake_up_interruptible(&pipe->wait);
-			kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
-		}
+	if (do_wakeup) {
+		smp_mb();
+		if (waitqueue_active(&pipe->wait))
+			wake_up_interruptible(&pipe->wait);
+		kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 	}
 
 	while (page_nr < spd_pages)
@@ -801,11 +798,9 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 		.u.file = out,
 	};
 
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 	ret = __splice_from_pipe(pipe, &sd, actor);
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 
 	return ret;
 }
@@ -837,8 +832,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	};
 	ssize_t ret;
 
-	if (pipe->inode)
-		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
+	pipe_lock(pipe);
 
 	splice_from_pipe_begin(&sd);
 	do {
@@ -854,8 +848,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	} while (ret > 0);
 	splice_from_pipe_end(pipe, &sd);
 
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 
 	if (sd.num_spliced)
 		ret = sd.num_spliced;
@@ -1348,8 +1341,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
 	if (!pipe)
 		return -EBADF;
 
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	error = ret = 0;
 	while (nr_segs) {
@@ -1404,8 +1396,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
 		iov++;
 	}
 
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 
 	if (!ret)
 		ret = error;
@@ -1533,7 +1524,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 		return 0;
 
 	ret = 0;
-	mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	while (!pipe->nrbufs) {
 		if (signal_pending(current)) {
@@ -1551,7 +1542,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 		pipe_wait(pipe);
 	}
 
-	mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 	return ret;
 }
 
@@ -1571,7 +1562,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 		return 0;
 
 	ret = 0;
-	mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	while (pipe->nrbufs >= PIPE_BUFFERS) {
 		if (!pipe->readers) {
@@ -1592,7 +1583,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
 		pipe->waiting_writers--;
 	}
 
-	mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 	return ret;
 }
 
@@ -1608,10 +1599,10 @@ static int link_pipe(struct pipe_inode_info *ipipe,
 
 	/*
 	 * Potential ABBA deadlock, work around it by ordering lock
-	 * grabbing by inode address. Otherwise two different processes
+	 * grabbing by pipe info address. Otherwise two different processes
 	 * could deadlock (one doing tee from A -> B, the other from B -> A).
 	 */
-	inode_double_lock(ipipe->inode, opipe->inode);
+	pipe_double_lock(ipipe, opipe);
 
 	do {
 		if (!opipe->readers) {
@@ -1662,7 +1653,8 @@ static int link_pipe(struct pipe_inode_info *ipipe,
 	if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
 		ret = -EAGAIN;
 
-	inode_double_unlock(ipipe->inode, opipe->inode);
+	pipe_unlock(ipipe);
+	pipe_unlock(opipe);
 
 	/*
 	 * If we put data in the output pipe, wakeup any potential readers.
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 907d8f56c6f..e766be0d432 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -797,9 +797,6 @@ enum inode_i_mutex_lock_class
 	I_MUTEX_QUOTA
 };
 
-extern void inode_double_lock(struct inode *inode1, struct inode *inode2);
-extern void inode_double_unlock(struct inode *inode1, struct inode *inode2);
-
 /*
  * NOTE: in a 32bit arch with a preemptable kernel and
  * an UP compile the i_size_read/write must be atomic
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 8e4120285f7..c8f038554e8 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -134,6 +134,11 @@ struct pipe_buf_operations {
    memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
 #define PIPE_SIZE		PAGE_SIZE
 
+/* Pipe lock and unlock operations */
+void pipe_lock(struct pipe_inode_info *);
+void pipe_unlock(struct pipe_inode_info *);
+void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
+
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe);
 
-- 
GitLab


From 86c824b9434e764d01489688e4e38aee43b93fcf Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 15 Apr 2009 09:00:07 +0200
Subject: [PATCH 0253/1421] bio: add documentation to bio_alloc()

Explain that with __GFP_WAIT set it will not fail, and that the caller
must never allocate more than 1 bio at the time.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/bio.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/fs/bio.c b/fs/bio.c
index e0c9e545bbf..cd42bb882f3 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -348,6 +348,24 @@ err:
 	return NULL;
 }
 
+/**
+ * bio_alloc - allocate a bio for I/O
+ * @gfp_mask:   the GFP_ mask given to the slab allocator
+ * @nr_iovecs:	number of iovecs to pre-allocate
+ *
+ * Description:
+ *   bio_alloc will allocate a bio and associated bio_vec array that can hold
+ *   at least @nr_iovecs entries. Allocations will be done from the
+ *   fs_bio_set. Also see @bio_alloc_bioset.
+ *
+ *   If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ *   a bio. This is due to the mempool guarantees. To make this work, callers
+ *   must never allocate more than 1 bio at the time from this pool. Callers
+ *   that need to allocate more than 1 bio must always submit the previously
+ *   allocate bio for IO before attempting to allocate a new one. Failure to
+ *   do so can cause livelocks under memory pressure.
+ *
+ **/
 struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
 {
 	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
-- 
GitLab


From 15afd1cc7b624e1c94fdf824ec5af611050b150c Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Wed, 15 Apr 2009 10:35:31 +0530
Subject: [PATCH 0254/1421] block: Remove code handling bio_alloc failure with
 __GFP_WAIT

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_KERNEL implies __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-barrier.c | 3 ---
 block/ioctl.c       | 2 --
 2 files changed, 5 deletions(-)

diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index f7dae57e6ca..20b4111fa05 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -319,9 +319,6 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector)
 		return -ENXIO;
 
 	bio = bio_alloc(GFP_KERNEL, 0);
-	if (!bio)
-		return -ENOMEM;
-
 	bio->bi_end_io = bio_end_empty_barrier;
 	bio->bi_private = &wait;
 	bio->bi_bdev = bdev;
diff --git a/block/ioctl.c b/block/ioctl.c
index 0f22e629b13..ad474d4bbcc 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -146,8 +146,6 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start,
 		struct bio *bio;
 
 		bio = bio_alloc(GFP_KERNEL, 0);
-		if (!bio)
-			return -ENOMEM;
 
 		bio->bi_end_io = blk_ioc_discard_endio;
 		bio->bi_bdev = bdev;
-- 
GitLab


From 4d1f9fdb6177a9bdecf26976337dd39abcc8edbc Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Wed, 15 Apr 2009 10:35:52 +0530
Subject: [PATCH 0255/1421] dio: Remove code handling bio_alloc failure with
 __GFP_WAIT

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_KERNEL implies __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/direct-io.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/direct-io.c b/fs/direct-io.c
index da258e7249c..05763bbc205 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -307,8 +307,6 @@ dio_bio_alloc(struct dio *dio, struct block_device *bdev,
 	struct bio *bio;
 
 	bio = bio_alloc(GFP_KERNEL, nr_vecs);
-	if (bio == NULL)
-		return -ENOMEM;
 
 	bio->bi_bdev = bdev;
 	bio->bi_sector = first_sector;
-- 
GitLab


From 226e7dabf5534722944adefbad01970bd38bb7ae Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Wed, 15 Apr 2009 10:36:16 +0530
Subject: [PATCH 0256/1421] ext4: Remove code handling bio_alloc failure with
 __GFP_WAIT

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_NOIO implies __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/ext4/extents.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 6132353dcf6..2a1cb097976 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2416,8 +2416,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex)
 			len = ee_len;
 
 		bio = bio_alloc(GFP_NOIO, len);
-		if (!bio)
-			return -ENOMEM;
 		bio->bi_sector = ee_pblock;
 		bio->bi_bdev   = inode->i_sb->s_bdev;
 
-- 
GitLab


From b1fffc9ca6ca4c3feef3a7e8405252d528d312dc Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Wed, 15 Apr 2009 10:36:35 +0530
Subject: [PATCH 0257/1421] gfs2: Remove code handling bio_alloc failure with
 __GFP_WAIT

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_NOFS implies __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/gfs2/ops_fstype.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 51883b3ad89..650a730707b 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -272,11 +272,6 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector)
 	lock_page(page);
 
 	bio = bio_alloc(GFP_NOFS, 1);
-	if (unlikely(!bio)) {
-		__free_page(page);
-		return -ENOBUFS;
-	}
-
 	bio->bi_sector = sector * (sb->s_blocksize >> 9);
 	bio->bi_bdev = sb->s_bdev;
 	bio_add_page(bio, page, PAGE_SIZE, 0);
-- 
GitLab


From 297dbf50d7ab0539cf9cf7f2a66918665a18e45e Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Wed, 15 Apr 2009 10:37:04 +0530
Subject: [PATCH 0258/1421] swap: Remove code handling bio_alloc failure with
 __GFP_WAIT

Remove code handling bio_alloc failure with __GFP_WAIT.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 kernel/power/swap.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 505f319e489..8ba052c86d4 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -64,8 +64,6 @@ static int submit(int rw, pgoff_t page_off, struct page *page,
 	struct bio *bio;
 
 	bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
-	if (!bio)
-		return -ENOMEM;
 	bio->bi_sector = page_off * (PAGE_SIZE >> 9);
 	bio->bi_bdev = resume_bdev;
 	bio->bi_end_io = end_swap_bio_read;
-- 
GitLab


From dfbc4752eab33e66f113f9daa2effbe241cd661d Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 15 Apr 2009 10:27:07 +0200
Subject: [PATCH 0259/1421] brd: support barriers

brd is always ordered (not that it matters, as it is defined not to
survive when the system goes down). So tell the block layer it is
ordered, which might be of help with testing filesystems.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/block/brd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index bdd4f5f4557..ee8ed68f197 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -436,6 +436,7 @@ static struct brd_device *brd_alloc(int i)
 	if (!brd->brd_queue)
 		goto out_free_dev;
 	blk_queue_make_request(brd->brd_queue, brd_make_request);
+	blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
 	blk_queue_max_sectors(brd->brd_queue, 1024);
 	blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
 
-- 
GitLab


From c2572f2b4ffc27ba79211aceee3bef53a59bb5cd Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 15 Apr 2009 10:32:07 +0200
Subject: [PATCH 0260/1421] brd: fix cacheflushing

brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the
pagecache's responsibility to flush user virtual aliases (the driver of
course should flush kernel virtual mappings)... but anyway, there
already exists cache flushing for one direction of transfer, so we
should add the other.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/block/brd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index ee8ed68f197..5f7e64ba87e 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -275,8 +275,10 @@ static int brd_do_bvec(struct brd_device *brd, struct page *page,
 	if (rw == READ) {
 		copy_from_brd(mem + off, brd, sector, len);
 		flush_dcache_page(page);
-	} else
+	} else {
+		flush_dcache_page(page);
 		copy_to_brd(brd, mem + off, sector, len);
+	}
 	kunmap_atomic(mem, KM_USER0);
 
 out:
-- 
GitLab


From 40bb54d197a10fe86d73073ee8202ba2812a05fa Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 15 Apr 2009 12:11:10 +0200
Subject: [PATCH 0261/1421] cfq-iosched: no need to save interrupts in
 cfq_kick_queue()

It's called from the workqueue handlers from process context, so
we always have irqs enabled when entered.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 56e9d8503cf..e59f2108272 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -2157,11 +2157,10 @@ static void cfq_kick_queue(struct work_struct *work)
 	struct cfq_data *cfqd =
 		container_of(work, struct cfq_data, unplug_work);
 	struct request_queue *q = cfqd->queue;
-	unsigned long flags;
 
-	spin_lock_irqsave(q->queue_lock, flags);
+	spin_lock_irq(q->queue_lock);
 	blk_start_queueing(q);
-	spin_unlock_irqrestore(q->queue_lock, flags);
+	spin_unlock_irq(q->queue_lock);
 }
 
 /*
-- 
GitLab


From 2d870722965211de072bb36b446a4df99dae07e1 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 15 Apr 2009 12:12:46 +0200
Subject: [PATCH 0262/1421] cfq-iosched: tweak kick logic a bit more

We only kick the dispatch for an idling queue, if we think it's a
(somewhat) fully merged request. Also allow a kick if we have other
busy queues in the system, since we don't want to risk waiting for
a potential merge in that case. It's better to get some work done and
proceed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index e59f2108272..579f3182246 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1905,10 +1905,13 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		 * of tiny requests, because we disrupt the normal plugging
 		 * and merging. If the request is already larger than a single
 		 * page, let it rip immediately. For that case we assume that
-		 * merging is already done.
+		 * merging is already done. Ditto for a busy system that
+		 * has other work pending, don't risk delaying until the
+		 * idle timer unplug to continue working.
 		 */
 		if (cfq_cfqq_wait_request(cfqq)) {
-			if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE) {
+			if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
+			    cfqd->busy_queues > 1) {
 				del_timer(&cfqd->idle_slice_timer);
 				blk_start_queueing(cfqd->queue);
 			}
-- 
GitLab


From 9481ffdc61738a91baf0f8b7fb20922768ae1b8e Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 15 Apr 2009 12:14:13 +0200
Subject: [PATCH 0263/1421] cfq-iosched: log responsible 'cfqq' in idle timer
 arm

Makes it easier to read the traces.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 579f3182246..090a4ee75b9 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -936,7 +936,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 		sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
-	cfq_log(cfqd, "arm_idle: %lu", sl);
+	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
 /*
-- 
GitLab


From a36e71f996e25d6213f57951f7ae1874086ec57e Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Wed, 15 Apr 2009 12:15:11 +0200
Subject: [PATCH 0264/1421] cfq-iosched: add close cooperator code

If we have processes that are working in close proximity to each
other on disk, we don't want to idle wait. Instead allow the close
process to issue a request, getting better aggregate bandwidth.
The anticipatory scheduler has similar checks, noop and deadline do
not need it since they don't care about process <-> io mappings.

The code for CFQ is a little more involved though, since we split
request queues into per-process contexts.

This fixes a performance problem with eg dump(8), since it uses
several processes in some silly attempt to speed IO up. Even if
dump(8) isn't really a valid case (it should be fixed by using
CLONE_IO), there are other cases where we see close processes
and where idling ends up hurting performance.

Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the
initial implementation.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 223 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 198 insertions(+), 25 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 090a4ee75b9..0d3b70de3d8 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -80,6 +80,14 @@ struct cfq_data {
 	 * rr list of queues with requests and the count of them
 	 */
 	struct cfq_rb_root service_tree;
+
+	/*
+	 * Each priority tree is sorted by next_request position.  These
+	 * trees are used when determining if two or more queues are
+	 * interleaving requests (see cfq_close_cooperator).
+	 */
+	struct rb_root prio_trees[CFQ_PRIO_LISTS];
+
 	unsigned int busy_queues;
 	/*
 	 * Used to track any pending rt requests so we can pre-empt current
@@ -144,6 +152,8 @@ struct cfq_queue {
 	struct rb_node rb_node;
 	/* service_tree key */
 	unsigned long rb_key;
+	/* prio tree member */
+	struct rb_node p_node;
 	/* sorted list of pending requests */
 	struct rb_root sort_list;
 	/* if fifo isn't expired, next request to serve */
@@ -182,6 +192,7 @@ enum cfqq_state_flags {
 	CFQ_CFQQ_FLAG_prio_changed,	/* task priority has changed */
 	CFQ_CFQQ_FLAG_slice_new,	/* no requests dispatched in slice */
 	CFQ_CFQQ_FLAG_sync,		/* synchronous queue */
+	CFQ_CFQQ_FLAG_coop,		/* has done a coop jump of the queue */
 };
 
 #define CFQ_CFQQ_FNS(name)						\
@@ -208,6 +219,7 @@ CFQ_CFQQ_FNS(idle_window);
 CFQ_CFQQ_FNS(prio_changed);
 CFQ_CFQQ_FNS(slice_new);
 CFQ_CFQQ_FNS(sync);
+CFQ_CFQQ_FNS(coop);
 #undef CFQ_CFQQ_FNS
 
 #define cfq_log_cfqq(cfqd, cfqq, fmt, args...)	\
@@ -416,13 +428,17 @@ static struct cfq_queue *cfq_rb_first(struct cfq_rb_root *root)
 	return NULL;
 }
 
+static void rb_erase_init(struct rb_node *n, struct rb_root *root)
+{
+	rb_erase(n, root);
+	RB_CLEAR_NODE(n);
+}
+
 static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root)
 {
 	if (root->left == n)
 		root->left = NULL;
-
-	rb_erase(n, &root->rb);
-	RB_CLEAR_NODE(n);
+	rb_erase_init(n, &root->rb);
 }
 
 /*
@@ -467,8 +483,8 @@ static unsigned long cfq_slice_offset(struct cfq_data *cfqd,
  * requests waiting to be processed. It is sorted in the order that
  * we will service the queues.
  */
-static void cfq_service_tree_add(struct cfq_data *cfqd,
-				    struct cfq_queue *cfqq, int add_front)
+static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+				 int add_front)
 {
 	struct rb_node **p, *parent;
 	struct cfq_queue *__cfqq;
@@ -541,6 +557,63 @@ static void cfq_service_tree_add(struct cfq_data *cfqd,
 	rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb);
 }
 
+static struct cfq_queue *
+cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector,
+		     struct rb_node **ret_parent, struct rb_node ***rb_link)
+{
+	struct rb_root *root = &cfqd->prio_trees[ioprio];
+	struct rb_node **p, *parent;
+	struct cfq_queue *cfqq = NULL;
+
+	parent = NULL;
+	p = &root->rb_node;
+	while (*p) {
+		struct rb_node **n;
+
+		parent = *p;
+		cfqq = rb_entry(parent, struct cfq_queue, p_node);
+
+		/*
+		 * Sort strictly based on sector.  Smallest to the left,
+		 * largest to the right.
+		 */
+		if (sector > cfqq->next_rq->sector)
+			n = &(*p)->rb_right;
+		else if (sector < cfqq->next_rq->sector)
+			n = &(*p)->rb_left;
+		else
+			break;
+		p = n;
+	}
+
+	*ret_parent = parent;
+	if (rb_link)
+		*rb_link = p;
+	return NULL;
+}
+
+static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+	struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio];
+	struct rb_node **p, *parent;
+	struct cfq_queue *__cfqq;
+
+	if (!RB_EMPTY_NODE(&cfqq->p_node))
+		rb_erase_init(&cfqq->p_node, root);
+
+	if (cfq_class_idle(cfqq))
+		return;
+	if (!cfqq->next_rq)
+		return;
+
+	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector,
+					 &parent, &p);
+	BUG_ON(__cfqq);
+
+	rb_link_node(&cfqq->p_node, parent, p);
+	rb_insert_color(&cfqq->p_node, root);
+}
+
 /*
  * Update cfqq's position in the service tree.
  */
@@ -549,8 +622,10 @@ static void cfq_resort_rr_list(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 	/*
 	 * Resorting requires the cfqq to be on the RR list already.
 	 */
-	if (cfq_cfqq_on_rr(cfqq))
+	if (cfq_cfqq_on_rr(cfqq)) {
 		cfq_service_tree_add(cfqd, cfqq, 0);
+		cfq_prio_tree_add(cfqd, cfqq);
+	}
 }
 
 /*
@@ -581,6 +656,8 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 
 	if (!RB_EMPTY_NODE(&cfqq->rb_node))
 		cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+	if (!RB_EMPTY_NODE(&cfqq->p_node))
+		rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]);
 
 	BUG_ON(!cfqd->busy_queues);
 	cfqd->busy_queues--;
@@ -610,7 +687,7 @@ static void cfq_add_rq_rb(struct request *rq)
 {
 	struct cfq_queue *cfqq = RQ_CFQQ(rq);
 	struct cfq_data *cfqd = cfqq->cfqd;
-	struct request *__alias;
+	struct request *__alias, *prev;
 
 	cfqq->queued[rq_is_sync(rq)]++;
 
@@ -627,7 +704,15 @@ static void cfq_add_rq_rb(struct request *rq)
 	/*
 	 * check if this request is a better next-serve candidate
 	 */
+	prev = cfqq->next_rq;
 	cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+
+	/*
+	 * adjust priority tree position, if ->next_rq changes
+	 */
+	if (prev != cfqq->next_rq)
+		cfq_prio_tree_add(cfqd, cfqq);
+
 	BUG_ON(!cfqq->next_rq);
 }
 
@@ -840,11 +925,15 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd)
 /*
  * Get and set a new active queue for service.
  */
-static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
+static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
+					      struct cfq_queue *cfqq)
 {
-	struct cfq_queue *cfqq;
+	if (!cfqq) {
+		cfqq = cfq_get_next_queue(cfqd);
+		if (cfqq)
+			cfq_clear_cfqq_coop(cfqq);
+	}
 
-	cfqq = cfq_get_next_queue(cfqd);
 	__cfq_set_active_queue(cfqd, cfqq);
 	return cfqq;
 }
@@ -868,17 +957,89 @@ static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
 	return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
 }
 
-static int cfq_close_cooperator(struct cfq_data *cfq_data,
-				struct cfq_queue *cfqq)
+static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
+				    struct cfq_queue *cur_cfqq)
+{
+	struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio];
+	struct rb_node *parent, *node;
+	struct cfq_queue *__cfqq;
+	sector_t sector = cfqd->last_position;
+
+	if (RB_EMPTY_ROOT(root))
+		return NULL;
+
+	/*
+	 * First, if we find a request starting at the end of the last
+	 * request, choose it.
+	 */
+	__cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio,
+				      sector, &parent, NULL);
+	if (__cfqq)
+		return __cfqq;
+
+	/*
+	 * If the exact sector wasn't found, the parent of the NULL leaf
+	 * will contain the closest sector.
+	 */
+	__cfqq = rb_entry(parent, struct cfq_queue, p_node);
+	if (cfq_rq_close(cfqd, __cfqq->next_rq))
+		return __cfqq;
+
+	if (__cfqq->next_rq->sector < sector)
+		node = rb_next(&__cfqq->p_node);
+	else
+		node = rb_prev(&__cfqq->p_node);
+	if (!node)
+		return NULL;
+
+	__cfqq = rb_entry(node, struct cfq_queue, p_node);
+	if (cfq_rq_close(cfqd, __cfqq->next_rq))
+		return __cfqq;
+
+	return NULL;
+}
+
+/*
+ * cfqd - obvious
+ * cur_cfqq - passed in so that we don't decide that the current queue is
+ * 	      closely cooperating with itself.
+ *
+ * So, basically we're assuming that that cur_cfqq has dispatched at least
+ * one request, and that cfqd->last_position reflects a position on the disk
+ * associated with the I/O issued by cur_cfqq.  I'm not sure this is a valid
+ * assumption.
+ */
+static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
+					      struct cfq_queue *cur_cfqq,
+					      int probe)
 {
+	struct cfq_queue *cfqq;
+
+	/*
+	 * A valid cfq_io_context is necessary to compare requests against
+	 * the seek_mean of the current cfqq.
+	 */
+	if (!cfqd->active_cic)
+		return NULL;
+
 	/*
 	 * We should notice if some of the queues are cooperating, eg
 	 * working closely on the same area of the disk. In that case,
 	 * we can group them together and don't waste time idling.
 	 */
-	return 0;
+	cfqq = cfqq_close(cfqd, cur_cfqq);
+	if (!cfqq)
+		return NULL;
+
+	if (cfq_cfqq_coop(cfqq))
+		return NULL;
+
+	if (!probe)
+		cfq_mark_cfqq_coop(cfqq);
+	return cfqq;
 }
 
+
 #define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
 
 static void cfq_arm_slice_timer(struct cfq_data *cfqd)
@@ -917,13 +1078,6 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	if (!cic || !atomic_read(&cic->ioc->nr_tasks))
 		return;
 
-	/*
-	 * See if this prio level has a good candidate
-	 */
-	if (cfq_close_cooperator(cfqd, cfqq) &&
-	    (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2))
-		return;
-
 	cfq_mark_cfqq_wait_request(cfqq);
 
 	/*
@@ -1000,7 +1154,7 @@ cfq_prio_to_maxrq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
  */
 static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 {
-	struct cfq_queue *cfqq;
+	struct cfq_queue *cfqq, *new_cfqq = NULL;
 
 	cfqq = cfqd->active_queue;
 	if (!cfqq)
@@ -1033,6 +1187,16 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 	if (!RB_EMPTY_ROOT(&cfqq->sort_list))
 		goto keep_queue;
 
+	/*
+	 * If another queue has a request waiting within our mean seek
+	 * distance, let it run.  The expire code will check for close
+	 * cooperators and put the close queue at the front of the service
+	 * tree.
+	 */
+	new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0);
+	if (new_cfqq)
+		goto expire;
+
 	/*
 	 * No requests pending. If the active queue still has requests in
 	 * flight or is idling for a new request, allow either of these
@@ -1047,7 +1211,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 expire:
 	cfq_slice_expired(cfqd, 0);
 new_queue:
-	cfqq = cfq_set_active_queue(cfqd);
+	cfqq = cfq_set_active_queue(cfqd, new_cfqq);
 keep_queue:
 	return cfqq;
 }
@@ -1508,6 +1672,7 @@ retry:
 		}
 
 		RB_CLEAR_NODE(&cfqq->rb_node);
+		RB_CLEAR_NODE(&cfqq->p_node);
 		INIT_LIST_HEAD(&cfqq->fifo);
 
 		atomic_set(&cfqq->ref, 0);
@@ -2000,16 +2165,24 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	 * or if we want to idle in case it has no pending requests.
 	 */
 	if (cfqd->active_queue == cfqq) {
+		const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list);
+
 		if (cfq_cfqq_slice_new(cfqq)) {
 			cfq_set_prio_slice(cfqd, cfqq);
 			cfq_clear_cfqq_slice_new(cfqq);
 		}
+		/*
+		 * If there are no requests waiting in this queue, and
+		 * there are other queues ready to issue requests, AND
+		 * those other queues are issuing requests within our
+		 * mean seek distance, give them a chance to run instead
+		 * of idling.
+		 */
 		if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
 			cfq_slice_expired(cfqd, 1);
-		else if (sync && !rq_noidle(rq) &&
-			 RB_EMPTY_ROOT(&cfqq->sort_list)) {
+		else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) &&
+			 sync && !rq_noidle(rq))
 			cfq_arm_slice_timer(cfqd);
-		}
 	}
 
 	if (!cfqd->rq_in_driver)
-- 
GitLab


From acd216a15db902294904a974f66e1ba18763dc4c Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Wed, 8 Apr 2009 07:11:04 +0800
Subject: [PATCH 0265/1421] [ARM] S3C: remove duplicated #include

Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/mach-jive.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 332bd3263ea..d324f089edd 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -52,7 +52,6 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/udc.h>
-#include <plat/iic.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
-- 
GitLab


From b7f9a94bf22e8dfa6420faac831e40d2492dd28c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 8 Apr 2009 16:12:35 +0100
Subject: [PATCH 0266/1421] [ARM] SMDK6410: Request GPIOs for LCD power control

Going forward gpio_request() will be a requirement for GPIO API users so
call it for the LCD power GPIOs. With present code the kernel functions
but generaets loud WARN_ON()s when using the unrequested GPIOs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 25f7935576f..7f473e47e4f 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	gpio_request(S3C64XX_GPN(5), "LCD power");
+	gpio_request(S3C64XX_GPF(13), "LCD power");
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
-- 
GitLab


From 02884218368080f5ab891d270168d6c76c17ee5a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 14:56:33 +0100
Subject: [PATCH 0267/1421] [ARM] s3c2410_defconfig: update to 2.6.30-rc2

Update arch/arm/configs/s3c2410_defconfig to the
latest kernel release (2.6.30-rc2).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 426 +++++++++++++++++++++--------
 1 file changed, 319 insertions(+), 107 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 65a583ee5df..f4c42cc46ad 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul  7 16:59:23 2008
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 14:54:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -41,11 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -54,31 +63,36 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +102,11 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +114,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +131,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +141,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,26 +156,38 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_DCLK=y
 CONFIG_CPU_S3C244X=y
 # CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_GPIO_EXTRA=128
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_GPIO_EXTRA128=y
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
+# CONFIG_S3C24XX_ADC is not set
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -175,6 +198,7 @@ CONFIG_CPU_LLSERIAL_S3C2440=y
 #
 # CONFIG_S3C_BOOT_WATCHDOG is not set
 # CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 
 #
 # Power management
@@ -182,6 +206,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y
 # CONFIG_S3C2410_PM_DEBUG is not set
 # CONFIG_S3C2410_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DEV_HSMMC=y
 
 #
 # S3C2400 Machines
@@ -190,7 +216,6 @@ CONFIG_CPU_S3C2410=y
 CONFIG_CPU_S3C2410_DMA=y
 CONFIG_S3C2410_PM=y
 CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
 CONFIG_SIMTEC_NOR=y
 CONFIG_MACH_BAST_IDE=y
 
@@ -286,25 +311,31 @@ CONFIG_ISA=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -316,6 +347,11 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -332,6 +368,8 @@ CONFIG_FPE_NWFPE_XP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -346,10 +384,6 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +397,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -419,6 +454,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -428,8 +464,9 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -451,8 +488,7 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -462,35 +498,26 @@ CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -504,7 +531,9 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -513,6 +542,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -545,7 +575,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
@@ -566,8 +596,6 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -590,6 +618,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -601,6 +630,11 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -628,23 +662,32 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -653,7 +696,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -699,6 +741,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -711,11 +755,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_HAVE_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -731,9 +777,14 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_ENC28J60 is not set
 CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -742,11 +793,14 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 
@@ -755,7 +809,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -808,11 +865,12 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -837,6 +895,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -877,14 +936,17 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2412=y
 CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
@@ -892,7 +954,7 @@ CONFIG_PRINTER=y
 CONFIG_PPDEV=y
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -901,33 +963,44 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ELEKTOR is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -943,6 +1016,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_GPIO is not set
 # CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
@@ -950,44 +1024,56 @@ CONFIG_SPI_S3C24XX_GPIO=m
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_DEBUG_GPIO is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1003,10 +1089,16 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -1022,7 +1114,10 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1043,20 +1138,32 @@ CONFIG_S3C2410_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1082,6 +1189,7 @@ CONFIG_MFD_SM501=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1105,6 +1213,9 @@ CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1125,10 +1236,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1139,12 +1246,12 @@ CONFIG_HID=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB HID Boot Protocol drivers
+# Special HID drivers
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_HID_APPLE=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1161,11 +1268,15 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1174,6 +1285,8 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1181,20 +1294,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1210,7 +1323,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1221,13 +1333,12 @@ CONFIG_USB_SERIAL=y
 # CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1251,15 +1362,19 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1268,7 +1383,7 @@ CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1276,7 +1391,6 @@ CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1285,8 +1399,17 @@ CONFIG_USB_LD=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
@@ -1295,7 +1418,12 @@ CONFIG_LEDS_CLASS=m
 #
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1304,7 +1432,13 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1335,31 +1469,43 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1370,17 +1516,20 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1390,6 +1539,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1416,15 +1570,13 @@ CONFIG_NTFS_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1444,23 +1596,29 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1546,6 +1704,11 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1565,14 +1728,39 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1586,19 +1774,29 @@ CONFIG_DEBUG_S3C_UART=0
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1634,6 +1832,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1663,23 +1865,33 @@ CONFIG_CRYPTO_DES=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 7fa6bed89af1ddb14511fddc47133e574d92dcb2 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 15:00:18 +0100
Subject: [PATCH 0268/1421] [ARM] s3c2410_defconfig: Update network options

Update the list of modules being built for the network
core of the s3c2410_defconfig. This update adds such
items as TCP congestion, netfilter for IPv4 and IPv6.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 219 +++++++++++++++++++++++++++--
 1 file changed, 206 insertions(+), 13 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f4c42cc46ad..5b92cae6155 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 14:54:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -393,29 +392,33 @@ CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
 CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_ASK_IP_FIB_HASH is not set
+# CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
@@ -423,8 +426,25 @@ CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
 CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
@@ -448,7 +468,175 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -466,6 +654,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 # CONFIG_DCB is not set
 
 #
@@ -1828,7 +2017,7 @@ CONFIG_CRYPTO_HMAC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1886,12 +2075,16 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
-- 
GitLab


From 2ba4d47210354e5595ceb4464525b5ae7cff3774 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 15:02:47 +0100
Subject: [PATCH 0269/1421] [ARM] s3c2410_defconfig: Update machine
 configuration

Update the machine configuration of s3c2410_defconfig to
add support for newer machines, and update the s3c24xx
specific options.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 5b92cae6155..e347de13467 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -3,6 +3,7 @@
 # Linux kernel version: 2.6.30-rc2
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
@@ -179,14 +180,14 @@ CONFIG_PLAT_S3C24XX=y
 CONFIG_S3C2410_CLOCK=y
 CONFIG_S3C24XX_DCLK=y
 CONFIG_CPU_S3C244X=y
-# CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_PWM=y
 CONFIG_S3C24XX_GPIO_EXTRA=128
 CONFIG_S3C24XX_GPIO_EXTRA64=y
 CONFIG_S3C24XX_GPIO_EXTRA128=y
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_ADC=y
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -196,7 +197,7 @@ CONFIG_CPU_LLSERIAL_S3C2440=y
 # Boot options
 #
 # CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 
 #
@@ -229,7 +230,7 @@ CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
 CONFIG_BAST_PC104_IRQ=y
-# CONFIG_MACH_TCT_HAMMER is not set
+CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
@@ -239,10 +240,11 @@ CONFIG_S3C2412_PM=y
 #
 # S3C2412 Machines
 #
-# CONFIG_MACH_JIVE is not set
+CONFIG_MACH_JIVE=y
+# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
 CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
-# CONFIG_MACH_SMDK2412 is not set
+CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
 CONFIG_S3C2440_DMA=y
@@ -256,7 +258,7 @@ CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
 
 #
@@ -402,8 +404,6 @@ CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_ASK_IP_FIB_HASH is not set
-# CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -1612,6 +1612,7 @@ CONFIG_LEDS_H1940=m
 # CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
 # CONFIG_LEDS_BD2802 is not set
 
 #
-- 
GitLab


From 121613e431c20de9829da0e9c83b3638762417cd Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 15:12:11 +0100
Subject: [PATCH 0270/1421] [ARM] s3c2410_defconfig: Add MMC/SD core and
 drivers

Add SD/MMC to the s3c2410_defconfig, building in the core
and adding the rest of the drivers as modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index e347de13467..49a0deae5e5 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -678,6 +678,7 @@ CONFIG_BT_HIDP=m
 # Bluetooth device drivers
 #
 # CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -1596,7 +1597,24 @@ CONFIG_USB_LD=m
 #
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_S3C=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -2075,7 +2093,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-- 
GitLab


From ea34f43a074af85823e49b9bf62f47d8d3f0e81a Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 15 Apr 2009 08:05:13 -0700
Subject: [PATCH 0271/1421] acpi-cpufreq: fix 'smp_call_function_many()'
 confusion

It turns out that 'smp_call_function_many()' doesn't work at all like
'smp_call_function_single()', and my change to Andrew's patch to use it
rather than a loop over all CPU's acpi-cpufreq doesn't work.

My bad.

'smp_call_function_many()' has two "features" (aka "documented bugs"):

 (a) it needs to be called with preemption disabled, because it uses
     smp_processor_id() without guarding the CPU lookup with 'get_cpu()'
     and 'put_cpu()' like the 'single' variant does.

 (b) even if the current CPU is part of the CPU mask, it won't do the
     call on that CPU.

Still, we're better off trying to use 'smp_call_function_many()' than
looping over CPU's, since it at least in theory allows us to use a
broadcast IPI and do it all in parallel.  So let's just work around the
silly semantic bugs in that function.

Reported-and-tested-by: Ali Gholami Rudi <ali@rudi.ir>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 837c2c4cc20..ecdb682ab51 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -204,7 +204,13 @@ static void drv_read(struct drv_cmd *cmd)
 
 static void drv_write(struct drv_cmd *cmd)
 {
+	int this_cpu;
+
+	this_cpu = get_cpu();
+	if (cpumask_test_cpu(this_cpu, cmd->mask))
+		do_drv_write(cmd);
 	smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+	put_cpu();
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
-- 
GitLab


From fcad94a4c71c36a05f4d5c6dcb174534b4e0b136 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 15 Apr 2009 17:48:35 +0200
Subject: [PATCH 0272/1421] ALSA: hda - Fix the cmd cache keys for amp verbs

Fix the key value generation for get/set amp verbs.  The upper bits of
the parameter have to be combined with the verb value to be unique for
each direction/index of amp access.

This fixes the resume problem on some hardwares like Macbook after
the channel mode is changed.

Tested-by: Johannes Berg <johannes@sipsolutions.net>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a4e5e595211..fd6e6f337d1 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2250,7 +2250,11 @@ int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid,
 	err = bus->ops.command(bus, res);
 	if (!err) {
 		struct hda_cache_head *c;
-		u32 key = build_cmd_cache_key(nid, verb);
+		u32 key;
+		/* parm may contain the verb stuff for get/set amp */
+		verb = verb | (parm >> 8);
+		parm &= 0xff;
+		key = build_cmd_cache_key(nid, verb);
 		c = get_alloc_hash(&codec->cmd_cache, key);
 		if (c)
 			c->val = parm;
-- 
GitLab


From d061ebd57a046b3df8be8b76c387a95171059244 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sat, 11 Apr 2009 16:55:41 -0700
Subject: [PATCH 0273/1421] Input: hp_sdc_rtc should depend on serio

Fix this build error when CONFIG_SERIO is not set
hp_sdc_rtc.c:691: undefined reference to `hp_sdc_request_timer_irq'
and so on..

"select should be used with care. select will force
a symbol to a value without visiting the dependencies."

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 203abac1e23..5c0a631d145 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@ config INPUT_SGI_BTNS
 
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
-	depends on GSC || HP300
+	depends on (GSC || HP300) && SERIO
 	select HP_SDC
 	help
 	  Say Y here if you want to support the built-in real time clock
-- 
GitLab


From 4ced8e7cb990a2c3bbf0ac7f27b35c890e7ce895 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 13 Apr 2009 15:27:49 -0700
Subject: [PATCH 0274/1421] Input: gameport - fix attach driver code

The commit 6902c0bead4ce266226fc0c5b3828b850bdc884a that moved
driver registration out of kgameportd thread was incomplete and
did not add the code necessary to actually attach driver to
already registered devices, rectify that.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/gameport/gameport.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ebf4be5b7c4..2d175b5928f 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list);
 
 static struct bus_type gameport_bus;
 
-static void gameport_add_driver(struct gameport_driver *drv);
 static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
 static void gameport_reconnect_port(struct gameport *gameport);
 static void gameport_disconnect_port(struct gameport *gameport);
 
@@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport)
 
 enum gameport_event_type {
 	GAMEPORT_REGISTER_PORT,
-	GAMEPORT_REGISTER_DRIVER,
 	GAMEPORT_ATTACH_DRIVER,
 };
 
@@ -374,8 +372,8 @@ static void gameport_handle_event(void)
 				gameport_add_port(event->object);
 				break;
 
-			case GAMEPORT_REGISTER_DRIVER:
-				gameport_add_driver(event->object);
+			case GAMEPORT_ATTACH_DRIVER:
+				gameport_attach_driver(event->object);
 				break;
 
 			default:
@@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev)
 	return 0;
 }
 
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
 {
 	int error;
 
-	error = driver_register(&drv->driver);
+	error = driver_attach(&drv->driver);
 	if (error)
 		printk(KERN_ERR
-			"gameport: driver_register() failed for %s, error: %d\n",
+			"gameport: driver_attach() failed for %s, error: %d\n",
 			drv->driver.name, error);
 }
 
-- 
GitLab


From 157f3a3e17cd498571db2a472dc3a15a7679ee3f Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 13 Apr 2009 15:27:50 -0700
Subject: [PATCH 0275/1421] Input: atkbd - add forced release keys quirk for
 Samsung Q45

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index f999dc60c3b..f3e348e01f7 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1533,6 +1533,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
+	{
+		.ident = "Samsung SQ45S70S",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
 	{
 		.ident = "Fujitsu Amilo PA 1510",
 		.matches = {
-- 
GitLab


From e04126c79242d2740b469292d42c239bad7807cc Mon Sep 17 00:00:00 2001
From: Barry Carroll <baz8080@gmail.com>
Date: Tue, 14 Apr 2009 10:38:34 -0700
Subject: [PATCH 0276/1421] Input: atkbd - add forced release keys quirk for
 Samsung NC20

Signed-off-by: Barry Carroll <baz8080@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index f3e348e01f7..444dec07e5d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -880,7 +880,7 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
 };
 
 /*
- * Samsung NC10 with Fn+F? key release not working
+ * Samsung NC10,NC20 with Fn+F? key release not working
  */
 static unsigned int atkbd_samsung_forced_release_keys[] = {
 	0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
@@ -1533,6 +1533,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
+	{
+		.ident = "Samsung NC20",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
 	{
 		.ident = "Samsung SQ45S70S",
 		.matches = {
-- 
GitLab


From 93ff27c66de5c9eb0ead1e6f979afa97cbcf1e9d Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Tue, 14 Apr 2009 10:38:35 -0700
Subject: [PATCH 0277/1421] Input: da9034-ts - add Bin Yang as co-author of the
 driver

Bin did a lot of work on this driver, without his help, this driver
will not be possible.

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/da9034-ts.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index fa67d782c3c..666a6e74be4 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *	Fengwei Yin <fengwei.yin@marvell.com>
+ *	Bin Yang  <bin.yang@marvell.com>
  *	Eric Miao <eric.miao@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -385,6 +386,6 @@ static void __exit da9034_touch_exit(void)
 module_exit(da9034_touch_exit);
 
 MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:da9034-touch");
-- 
GitLab


From 7f6d5ff22b06d0c4db7b3b1eae336a19e88f808c Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Tue, 14 Apr 2009 10:38:35 -0700
Subject: [PATCH 0278/1421] Input: da9034-ts - make pen {down,up} events more
 reliable

PEN_{UP/DOWN} events are expected to be available soon after stopping
TSI auto measurement, but this is found not always be true. Work around
this by adding delay and simulating such an event (according to pen down
status bit).

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/da9034-ts.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index 666a6e74be4..3ffd4c4b170 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -176,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 			goto err_reset;
 
 		touch->state = STATE_STOP;
+
+		/* FIXME: PEN_{UP/DOWN} events are expected to be
+		 * available by stopping TSI, but this is found not
+		 * always true, delay and simulate such an event
+		 * here is more reliable
+		 */
+		mdelay(1);
+		da9034_event_handler(touch,
+				     is_pen_down(touch) ? EVENT_PEN_DOWN :
+							  EVENT_PEN_UP);
 		break;
 
 	case STATE_STOP:
@@ -190,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 			report_pen_up(touch);
 			touch->state = STATE_IDLE;
 		}
-
-		input_sync(touch->input_dev);
 		break;
 
 	case STATE_WAIT:
@@ -201,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
 		if (is_pen_down(touch)) {
 			start_tsi(touch);
 			touch->state = STATE_BUSY;
-		} else
+		} else {
+			report_pen_up(touch);
 			touch->state = STATE_IDLE;
+		}
 		break;
 	}
 	return;
@@ -227,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb,
 	struct da9034_touch *touch =
 		container_of(nb, struct da9034_touch, notifier);
 
-	if (event & DA9034_EVENT_PEN_DOWN) {
-		if (is_pen_down(touch))
-			da9034_event_handler(touch, EVENT_PEN_DOWN);
-		else
-			da9034_event_handler(touch, EVENT_PEN_UP);
-	}
-
 	if (event & DA9034_EVENT_TSI_READY)
 		da9034_event_handler(touch, EVENT_TSI_READY);
 
+	if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+		da9034_event_handler(touch, EVENT_PEN_DOWN);
+
 	return 0;
 }
 
-- 
GitLab


From 0bc69ce692bd240bef2819d9f3b3527fad524f5b Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 14 Apr 2009 10:38:36 -0700
Subject: [PATCH 0279/1421] Input: ad7877, ad7879 - remove depreciated
 IRQF_SAMPLE_RANDOM flag

This patch removes depreciated IRQF_SAMPLE_RANDOM flags from
ad7877 and ad7879 touchscreen drivers.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/ad7877.c | 4 ++--
 drivers/input/touchscreen/ad7879.c | 3 +--
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index e4728a28f49..ecaeb7e8e75 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -736,8 +736,8 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 
 	/* Request AD7877 /DAV GPIO interrupt */
 
-	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
-			IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+			spi->dev.driver->name, ts);
 	if (err) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		goto err_free_mem;
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index ea4c61d6868..5d8a7039880 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -448,8 +448,7 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 	ad7879_setup(ts);
 
 	err = request_irq(bus->irq, ad7879_irq,
-			  IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
-			  bus->dev.driver->name, ts);
+			  IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
 
 	if (err) {
 		dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
-- 
GitLab


From 3eaa750d5652afbb9c8f25308c3647f89e41cefb Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 14 Apr 2009 10:38:36 -0700
Subject: [PATCH 0280/1421] Input: bf54x-keys - remove depreciated
 IRQF_SAMPLE_RANDOM flag

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/bf54x-keys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index e94b7d735ac..d427f322e20 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev)
 	}
 
 	error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
-				 IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+				0, DRV_NAME, pdev);
 	if (error) {
 		printk(KERN_ERR DRV_NAME
 			": unable to claim irq %d; error %d\n",
-- 
GitLab


From 9a03fbe802f4bd676de17af61aaaab8969982439 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Wed, 15 Apr 2009 09:03:07 -0700
Subject: [PATCH 0281/1421] Input: pc110pad - remove unused variable dev
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

dev is leftover from b0ee0d3eb31a163c958f2960906c44bcdfdc607b
(Input: pc110pad - use no_pci_devices()).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/pc110pad.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index f63995f854f..3941f97cfa6 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -108,7 +108,6 @@ static int pc110pad_open(struct input_dev *dev)
  */
 static int __init pc110pad_init(void)
 {
-	struct pci_dev *dev;
 	int err;
 
 	if (!no_pci_devices())
-- 
GitLab


From 180deb50880cdc5e9dd69ec97af0d6e72c5417fc Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Wed, 15 Apr 2009 09:03:07 -0700
Subject: [PATCH 0282/1421] Input: mainstone-wm97xx - fix condition in pen_up

The loop body was never executed, because the condition is
always false. Convert to for with more obvious condition.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/mainstone-wm97xx.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index dfa6a84ab50..4cc047a5116 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm)
 #else
 static void wm97xx_acc_pen_up(struct wm97xx *wm)
 {
-	int count = 16;
+	unsigned int count;
+
 	schedule_timeout_uninterruptible(1);
 
-	while (count < 16) {
+	for (count = 0; count < 16; count++)
 		MODR;
-		count--;
-	}
 }
 #endif
 
-- 
GitLab


From 3bb4e153a7819c53911aa8a767c22bac9871a202 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 15 Apr 2009 19:34:41 +0100
Subject: [PATCH 0283/1421] MN10300: Discard duplicate PFN_xxx() macros

Discard duplicate PFN_xxx() macros from arch code as they're now in the
general headers.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/setup.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 71414e19fd1..79890edfd67 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p)
 	data_resource.start = virt_to_bus(&_etext);
 	data_resource.end = virt_to_bus(&_edata)-1;
 
-#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
-
 	start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
 	kstart_pfn = PFN_UP(__pa(&_text));
 	free_pfn = PFN_UP(__pa(&_end));
-- 
GitLab


From 76d320a5072f93abb913e9b9d84304f819c34b96 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 15 Apr 2009 19:34:46 +0100
Subject: [PATCH 0284/1421] MN10300: Wire up missing system calls

Wire up missing system calls preadv() and pwritev().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/unistd.h | 2 ++
 arch/mn10300/kernel/entry.S       | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index 543a4f98695..fef5b434dad 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -344,6 +344,8 @@
 #define __NR_dup3		331
 #define __NR_pipe2		332
 #define __NR_inotify_init1	333
+#define __NR_preadv		334
+#define __NR_pwritev		335
 
 #ifdef __KERNEL__
 
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 34ab5a29315..3dc3e462f92 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -723,6 +723,8 @@ ENTRY(sys_call_table)
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 335 */
 
 
 nr_syscalls=(.-sys_call_table)/4
-- 
GitLab


From 616df135110ccae617ef9f10e0814fa48462cc37 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 15 Apr 2009 19:34:51 +0100
Subject: [PATCH 0285/1421] MN10300: Stop gcc from generating uninitialised
 variable warnings after BUG()

Stop gcc from generating uninitialised variable warnings after BUG().  The
problem is that MN10300's implementation of BUG() invokes system call 15 which
doesn't return - but there's no way to tell the compiler that and also emit the
bug table element with the correct file and line data.

So instead, we make the do...while wrapper in _debug_bug_trap() an endless loop
from which there's no escape.

Also, while we're at it, (1) get rid of _debug_bug_trap() and just implement
directly as BUG(), and (2) make the implementation of BUG() contingent on
CONFIG_BUG=y.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/bug.h | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
index 4fcf3384e25..aa6a3888639 100644
--- a/arch/mn10300/include/asm/bug.h
+++ b/arch/mn10300/include/asm/bug.h
@@ -11,10 +11,12 @@
 #ifndef _ASM_BUG_H
 #define _ASM_BUG_H
 
+#ifdef CONFIG_BUG
+
 /*
  * Tell the user there is some problem.
  */
-#define _debug_bug_trap()					\
+#define BUG()							\
 do {								\
 	asm volatile(						\
 		"	syscall 15			\n"	\
@@ -25,11 +27,11 @@ do {								\
 		:						\
 		: "i"(__FILE__), "i"(__LINE__)			\
 		);						\
-} while (0)
-
-#define BUG() _debug_bug_trap()
+} while (1)
 
 #define HAVE_ARCH_BUG
+#endif /* CONFIG_BUG */
+
 #include <asm-generic/bug.h>
 
 #endif /* _ASM_BUG_H */
-- 
GitLab


From da60682c116855cf342926b4f3427079400ee7e6 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 15 Apr 2009 19:34:56 +0100
Subject: [PATCH 0286/1421] The default CONFIG_BUG=n version of BUG() should
 have an empty do...while

The default CONFIG_BUG=n version of BUG() should incorporate an empty a
do...while statement to avoid compilation weirdness.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/bug.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 37b82cb96c8..e727fe0d145 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -88,7 +88,7 @@ extern void warn_slowpath(const char *file, const int line,
 
 #else /* !CONFIG_BUG */
 #ifndef HAVE_ARCH_BUG
-#define BUG()
+#define BUG() do {} while(0)
 #endif
 
 #ifndef HAVE_ARCH_BUG_ON
-- 
GitLab


From 5b1d07ed0e5b2707f786957c7a40eb2f399c84a8 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 15 Apr 2009 19:35:01 +0100
Subject: [PATCH 0287/1421] RCU: Don't try and predeclare inline funcs as it
 upsets some versions of gcc

Don't try and predeclare inline funcs like this:

	static inline void wait_migrated_callbacks(void)
	...
	static void _rcu_barrier(enum rcu_barrier type)
	{
		...
		wait_migrated_callbacks();
	}
	...
	static inline void wait_migrated_callbacks(void)
	{
		wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
	}

as it upsets some versions of gcc under some circumstances:

	kernel/rcupdate.c: In function `_rcu_barrier':
	kernel/rcupdate.c:125: sorry, unimplemented: inlining failed in call to 'wait_migrated_callbacks': function body not available
	kernel/rcupdate.c:152: sorry, unimplemented: called from here

This can be dealt with by simply putting the static variables (rcu_migrate_*)
at the top, and moving the implementation of the function up so that it
replaces its forward declaration.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/rcupdate.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 2c7b8457d0d..a967c9feb90 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -58,6 +58,10 @@ static DEFINE_MUTEX(rcu_barrier_mutex);
 static struct completion rcu_barrier_completion;
 int rcu_scheduler_active __read_mostly;
 
+static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
+static struct rcu_head rcu_migrate_head[3];
+static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
+
 /*
  * Awaken the corresponding synchronize_rcu() instance now that a
  * grace period has elapsed.
@@ -122,7 +126,10 @@ static void rcu_barrier_func(void *type)
 	}
 }
 
-static inline void wait_migrated_callbacks(void);
+static inline void wait_migrated_callbacks(void)
+{
+	wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+}
 
 /*
  * Orchestrate the specified type of RCU barrier, waiting for all
@@ -179,21 +186,12 @@ void rcu_barrier_sched(void)
 }
 EXPORT_SYMBOL_GPL(rcu_barrier_sched);
 
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
 static void rcu_migrate_callback(struct rcu_head *notused)
 {
 	if (atomic_dec_and_test(&rcu_migrate_type_count))
 		wake_up(&rcu_migrate_wq);
 }
 
-static inline void wait_migrated_callbacks(void)
-{
-	wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
-}
-
 static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
-- 
GitLab


From d45b41ae8da0f54aec0eebcc6f893ba5f22a1e8e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 15 Apr 2009 23:15:14 +0200
Subject: [PATCH 0288/1421] x86: disable X86_PTRACE_BTS for now

Oleg Nesterov found a couple of races in the ptrace-bts code
and fixes are queued up for it but they did not get ready in time
for the merge window. We'll merge them in v2.6.31 - until then
mark the feature as CONFIG_BROKEN. There's no user-space yet
making use of this so it's not a big issue.

Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig.cpu | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 924e156a85a..8130334329c 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -506,6 +506,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
+	depends on BROKEN
 	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 
-- 
GitLab


From 3f3e7c6e139f704e2f48ea3b45ff7724a8d46456 Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Wed, 15 Apr 2009 18:57:55 -0700
Subject: [PATCH 0289/1421] Input: ads7846 - fix unsafe disable_irq

The use of disable_irq inside the handler for the interrupt being
disabled has always been dangerous.  disable_irq should wait for that
handler to complete before returning -> deadlock.

For some reason this wasn't actually the case until 3aa551c9b was merged
but since this time, the ads7846 driver has deadlocked the system on
first interrupt.

Convert the driver to use the handler-safe _nosync variant.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/ads7846.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index cf7e69766b2..8b6e30ac291 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -754,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
 			 * that here.  (The "generic irq" framework may help...)
 			 */
 			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
+			disable_irq_nosync(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
 					HRTIMER_MODE_REL);
-- 
GitLab


From 063adc7502890a0b115da4af4e15cc2622b348de Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 16 Apr 2009 14:12:22 +0900
Subject: [PATCH 0290/1421] rtc: rtc-sh: clock framework support.

This adds clock framework support to the rtc-sh driver. With this in
place, platforms can default to leaving the clock disabled rather than
placing it in the always enabled state.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/rtc/Kconfig  |  2 +-
 drivers/rtc/rtc-sh.c | 67 ++++++++++++++++++++++++++++++++------------
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index ffe34a12f44..4e9851fc174 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -573,7 +573,7 @@ config RTC_DRV_SA1100
 
 config RTC_DRV_SH
 	tristate "SuperH On-Chip RTC"
-	depends on RTC_CLASS && SUPERH
+	depends on RTC_CLASS && SUPERH && HAVE_CLK
 	help
 	  Say Y here to enable support for the on-chip RTC found in
 	  most SuperH processors.
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 9b1ff12bf94..d7310adb715 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -1,7 +1,7 @@
 /*
  * SuperH On-Chip RTC Support
  *
- * Copyright (C) 2006, 2007, 2008  Paul Mundt
+ * Copyright (C) 2006 - 2009  Paul Mundt
  * Copyright (C) 2006  Jamie Lenehan
  * Copyright (C) 2008  Angelo Castello
  *
@@ -25,10 +25,11 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/log2.h>
+#include <linux/clk.h>
 #include <asm/rtc.h>
 
 #define DRV_NAME	"sh-rtc"
-#define DRV_VERSION	"0.2.1"
+#define DRV_VERSION	"0.2.2"
 
 #define RTC_REG(r)	((r) * rtc_reg_size)
 
@@ -87,16 +88,17 @@
 #define RCR2_START	0x01	/* Start bit               */
 
 struct sh_rtc {
-	void __iomem *regbase;
-	unsigned long regsize;
-	struct resource *res;
-	int alarm_irq;
-	int periodic_irq;
-	int carry_irq;
-	struct rtc_device *rtc_dev;
-	spinlock_t lock;
-	unsigned long capabilities;	/* See asm-sh/rtc.h for cap bits */
-	unsigned short periodic_freq;
+	void __iomem		*regbase;
+	unsigned long		regsize;
+	struct resource		*res;
+	int			alarm_irq;
+	int			periodic_irq;
+	int			carry_irq;
+	struct clk		*clk;
+	struct rtc_device	*rtc_dev;
+	spinlock_t		lock;
+	unsigned long		capabilities;	/* See asm/rtc.h for cap bits */
+	unsigned short		periodic_freq;
 };
 
 static int __sh_rtc_interrupt(struct sh_rtc *rtc)
@@ -294,10 +296,10 @@ static inline void sh_rtc_setaie(struct device *dev, unsigned int enable)
 
 	tmp = readb(rtc->regbase + RCR1);
 
-	if (!enable)
-		tmp &= ~RCR1_AIE;
-	else
+	if (enable)
 		tmp |= RCR1_AIE;
+	else
+		tmp &= ~RCR1_AIE;
 
 	writeb(tmp, rtc->regbase + RCR1);
 
@@ -618,6 +620,7 @@ static int sh_rtc_irq_set_freq(struct device *dev, int freq)
 {
 	if (!is_power_of_2(freq))
 		return -EINVAL;
+
 	return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
 }
 
@@ -637,7 +640,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 	struct sh_rtc *rtc;
 	struct resource *res;
 	struct rtc_time r;
-	int ret;
+	char clk_name[6];
+	int clk_id, ret;
 
 	rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
 	if (unlikely(!rtc))
@@ -652,6 +656,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "No IRQ resource\n");
 		goto err_badres;
 	}
+
 	rtc->periodic_irq = ret;
 	rtc->carry_irq = platform_get_irq(pdev, 1);
 	rtc->alarm_irq = platform_get_irq(pdev, 2);
@@ -663,7 +668,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		goto err_badres;
 	}
 
-	rtc->regsize = res->end - res->start + 1;
+	rtc->regsize = resource_size(res);
 
 	rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name);
 	if (unlikely(!rtc->res)) {
@@ -677,6 +682,26 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		goto err_badmap;
 	}
 
+	clk_id = pdev->id;
+	/* With a single device, the clock id is still "rtc0" */
+	if (clk_id < 0)
+		clk_id = 0;
+
+	snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id);
+
+	rtc->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(rtc->clk)) {
+		/*
+		 * No error handling for rtc->clk intentionally, not all
+		 * platforms will have a unique clock for the RTC, and
+		 * the clk API can handle the struct clk pointer being
+		 * NULL.
+		 */
+		rtc->clk = NULL;
+	}
+
+	clk_enable(rtc->clk);
+
 	rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
 					   &sh_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc->rtc_dev)) {
@@ -759,6 +784,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 	return 0;
 
 err_unmap:
+	clk_disable(rtc->clk);
+	clk_put(rtc->clk);
 	iounmap(rtc->regbase);
 err_badmap:
 	release_resource(rtc->res);
@@ -780,6 +807,7 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev)
 	sh_rtc_setcie(&pdev->dev, 0);
 
 	free_irq(rtc->periodic_irq, rtc);
+
 	if (rtc->carry_irq > 0) {
 		free_irq(rtc->carry_irq, rtc);
 		free_irq(rtc->alarm_irq, rtc);
@@ -789,6 +817,9 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev)
 
 	iounmap(rtc->regbase);
 
+	clk_disable(rtc->clk);
+	clk_put(rtc->clk);
+
 	platform_set_drvdata(pdev, NULL);
 
 	kfree(rtc);
@@ -802,11 +833,11 @@ static void sh_rtc_set_irq_wake(struct device *dev, int enabled)
 	struct sh_rtc *rtc = platform_get_drvdata(pdev);
 
 	set_irq_wake(rtc->periodic_irq, enabled);
+
 	if (rtc->carry_irq > 0) {
 		set_irq_wake(rtc->carry_irq, enabled);
 		set_irq_wake(rtc->alarm_irq, enabled);
 	}
-
 }
 
 static int sh_rtc_suspend(struct device *dev)
-- 
GitLab


From 6bf853aeb1d840222aebe532ad5afc861f4d0fbb Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 16 Apr 2009 14:15:38 +0900
Subject: [PATCH 0291/1421] sh: sh7722: Don't default enable the RTC clock.

rtc-sh takes care of this now, so no need to have this always enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0e5d204bc79..406747f07dc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -256,7 +256,6 @@ static int __init sh7722_devices_setup(void)
 {
 	clk_always_enable("uram0"); /* URAM */
 	clk_always_enable("xymem0"); /* XYMEM */
-	clk_always_enable("rtc0"); /* RTC */
 	clk_always_enable("veu0"); /* VEU */
 	clk_always_enable("vpu0"); /* VPU */
 	clk_always_enable("jpu0"); /* JPU */
-- 
GitLab


From b8c193f88ebd8705b3e916532539031cd9fc0b4c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 16 Apr 2009 14:16:33 +0900
Subject: [PATCH 0292/1421] sh: sh7723: Don't default enable the RTC clock.

rtc-sh takes care of this now, so no need to have this always enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 5338dacbcfb..a800466b938 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -267,7 +267,6 @@ static struct platform_device *sh7723_devices[] __initdata = {
 static int __init sh7723_devices_setup(void)
 {
 	clk_always_enable("meram0"); /* MERAM */
-	clk_always_enable("rtc0"); /* RTC */
 	clk_always_enable("veu1"); /* VEU2H1 */
 	clk_always_enable("veu0"); /* VEU2H0 */
 	clk_always_enable("vpu0"); /* VPU */
-- 
GitLab


From d523b0c808a5c5cbde9ac89427d98ee6288f5f2f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 15 Apr 2009 11:39:01 -0700
Subject: [PATCH 0293/1421] ALSA: hda_intel.c - Consolidate bitfields

Commit fa00e046b41663cbda9b1affc0594669e5f14219
added a new bitfield not adjacent to other
bitfields in the same struct.  Moved the new one.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_intel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index bc882f8f163..21e99cfa8c4 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -312,7 +312,6 @@ struct azx_dev {
 	unsigned int period_bytes; /* size of the period in bytes */
 	unsigned int frags;	/* number for period in the play buffer */
 	unsigned int fifo_size;	/* FIFO size */
-	unsigned int start_flag: 1;	/* stream full start flag */
 	unsigned long start_jiffies;	/* start + minimum jiffies */
 	unsigned long min_jiffies;	/* minimum jiffies before position is valid */
 
@@ -333,6 +332,7 @@ struct azx_dev {
 	unsigned int opened :1;
 	unsigned int running :1;
 	unsigned int irq_pending :1;
+	unsigned int start_flag: 1;	/* stream full start flag */
 	/*
 	 * For VIA:
 	 *  A flag to ensure DMA position is 0
-- 
GitLab


From 4611b043ce9c45cd8ac760b8379b02ceffe26b0d Mon Sep 17 00:00:00 2001
From: Daniel T Chen <seven.steps@gmail.com>
Date: Wed, 15 Apr 2009 19:43:35 -0400
Subject: [PATCH 0294/1421] ALSA: Intel8x0: Remove conflicting quirk for SSID
 0x103c0934

While cleaning up quirks, I noticed that there is a duplicated quirk for
the SSID 0x103c0934. Looking back through the bug reports, I've concluded
that there is only one necessary quirk (hp_mute_led), so this patch
removes the conflicting one.

Reference: Ubuntu #44066 (https://launchpad.net/bugs/44066)

Signed-off-by: Daniel T Chen <seven.steps@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/intel8x0.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 5dced5b7938..b3180d063d3 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1894,12 +1894,6 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 		.name = "HP nc6000",
 		.type = AC97_TUNE_MUTE_LED
 	},
-	{
-		.subvendor = 0x103c,
-		.subdevice = 0x0934,
-		.name = "HP nx8220",
-		.type = AC97_TUNE_MUTE_LED
-	},
 	{
 		.subvendor = 0x103c,
 		.subdevice = 0x129d,
-- 
GitLab


From c82834251ceb81b7575927c767500bd8c4a7f928 Mon Sep 17 00:00:00 2001
From: Daniel T Chen <seven.steps@gmail.com>
Date: Wed, 15 Apr 2009 19:48:08 -0400
Subject: [PATCH 0295/1421] ALSA: Intel8x0: Add hp_only quirk for SSID
 0x1028016a (Dell Inspiron 8600)

Subject says it all. Briefly, use hp_only for another Dell Inspiron 8600.

Reference: Ubuntu #41015 (https://launchpad.net/bugs/41015)

Signed-off-by: Daniel T Chen <seven.steps@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/intel8x0.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index b3180d063d3..8042d539889 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1852,6 +1852,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 		.name = "Dell Unknown",	/* STAC9750/51 */
 		.type = AC97_TUNE_HP_ONLY
 	},
+	{
+		.subvendor = 0x1028,
+		.subdevice = 0x016a,
+		.name = "Dell Inspiron 8600",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
 	{
 		.subvendor = 0x1028,
 		.subdevice = 0x0186,
-- 
GitLab


From cbb55092a674bcfd9774637a06d0f1511763aa2c Mon Sep 17 00:00:00 2001
From: eric miao <eric.y.miao@gmail.com>
Date: Thu, 16 Apr 2009 09:55:23 +0100
Subject: [PATCH 0296/1421] [ARM] 5453/1: fix building breakage of
 sys_oabi-compat.c due to missing kmalloc/kfree

It seems that declarations of kmalloc/kfree are missed, explicitly
include it.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/sys_oabi-compat.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 42623db7f87..e04173c7e62 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -83,6 +83,7 @@
 #include <linux/net.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 struct oldabi_stat64 {
 	unsigned long long st_dev;
-- 
GitLab


From 68c468c9d02674e7164580482320cfab92e8ad85 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 17:07:24 +0100
Subject: [PATCH 0297/1421] [ARM] s3c2410_defconfig: Add sound drivers

Add sound drivers to the s3c2410_defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 50 +++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 49a0deae5e5..a21d41e5248 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1344,6 +1344,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
@@ -1426,7 +1427,54 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C_I2SV2_SOC=m
+CONFIG_SND_S3C2412_SOC_I2S=m
+CONFIG_SND_S3C2443_SOC_AC97=m
+CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
+CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
+CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-- 
GitLab


From f04121e457f8ffd45aa6f2fb7abe85552f107db4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 17:15:05 +0100
Subject: [PATCH 0298/1421] [ARM] s3c2410_defconfig: Add video/radio drivers

Add a set of various video and radio drivers to the
s3c2410_defconfig as modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 183 ++++++++++++++++++++++++++++-
 1 file changed, 179 insertions(+), 4 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index a21d41e5248..742a985e699 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1363,14 +1363,189 @@ CONFIG_MFD_SM501=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_AU0828=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+# CONFIG_DVB_USB_A800 is not set
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+# CONFIG_DVB_USB_DIGITV is not set
+# CONFIG_DVB_USB_VP7045 is not set
+# CONFIG_DVB_USB_VP702X is not set
+# CONFIG_DVB_USB_GP8PSK is not set
+# CONFIG_DVB_USB_NOVA_T_USB2 is not set
+# CONFIG_DVB_USB_TTUSB2 is not set
+# CONFIG_DVB_USB_DTT200U is not set
+# CONFIG_DVB_USB_OPERA1 is not set
+CONFIG_DVB_USB_AF9005=m
+# CONFIG_DVB_USB_AF9005_REMOTE is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
 
 #
 # Graphics support
-- 
GitLab


From 89d44a0f006f30e8a1fa23c09f25e729eb70e3e5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 17:21:36 +0100
Subject: [PATCH 0299/1421] [ARM] s3c2410_defconfig: Update filesystem options

Update the filesystem options in the s3c2410_defconfig,
such as building ext4, enable the automounter as modules
and update the network filesysyem choices.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 41 ++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 10 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 742a985e699..5f2b607e40a 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1951,8 +1951,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1965,9 +1970,9 @@ CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 CONFIG_GENERIC_ACL=y
 
 #
@@ -2027,7 +2032,9 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -2043,17 +2050,31 @@ CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -2312,7 +2333,7 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-- 
GitLab


From f8832a988c54dbb2e12dce78ada67b1577a166ee Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 15 Apr 2009 17:25:39 +0100
Subject: [PATCH 0300/1421] [ARM] s3c2410_defconfig: Update USB device drivers

Add more USB device driver options to the s3c2410_defconfig,
mostly as modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 72 +++++++++++++++++-------------
 1 file changed, 41 insertions(+), 31 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 5f2b607e40a..806dcd46942 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1582,7 +1582,16 @@ CONFIG_FB_SM501=y
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
 # CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_PWM is not set
 
 #
 # Display device support
@@ -1696,6 +1705,7 @@ CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -1718,29 +1728,29 @@ CONFIG_USB_WDM=m
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
 
 #
 # USB port drivers
 #
-# CONFIG_USB_USS720 is not set
+CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 # CONFIG_USB_EZUSB is not set
@@ -1793,24 +1803,24 @@ CONFIG_USB_SERIAL_OPTION=m
 #
 # USB Miscellaneous drivers
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
 CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-- 
GitLab


From ea5a6fd810a4edc22c931f4c43b8d03c3a8c30fc Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 16 Apr 2009 10:20:47 +0100
Subject: [PATCH 0301/1421] [ARM] s3c2410_defconfig: Update miscellaneous
 drivers

Update the driver build in the s3c2410_defconfig for the
LED, IDE, Input and EEPROM options

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 124 ++++++++++++++++++++++-------
 1 file changed, 97 insertions(+), 27 deletions(-)

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 806dcd46942..2d58b8fe59b 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -844,7 +844,7 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -860,10 +860,10 @@ CONFIG_MISC_DEVICES=y
 #
 # EEPROM support
 #
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
 CONFIG_EEPROM_LEGACY=m
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=m
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -884,7 +884,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_PLATFORM=y
 # CONFIG_BLK_DEV_IDEDMA is not set
 
 #
@@ -1025,7 +1025,7 @@ CONFIG_NETDEV_10000=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -1036,7 +1036,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -1059,17 +1059,84 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 
 #
 # Hardware I/O ports
@@ -1079,7 +1146,9 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
 
 #
 # Character devices
@@ -1206,7 +1275,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_GPIO=m
 # CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
@@ -1214,8 +1283,8 @@ CONFIG_SPI_S3C24XX_GPIO=m
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -1591,7 +1660,7 @@ CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
 CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_PWM is not set
+CONFIG_BACKLIGHT_PWM=m
 
 #
 # Display device support
@@ -1858,13 +1927,14 @@ CONFIG_LEDS_CLASS=m
 #
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2802=m
 
 #
 # LED Triggers
@@ -1873,9 +1943,9 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 
 #
 # iptables trigger is under Netfilter config (LED target)
-- 
GitLab


From ffd0e56c606836581da5df742a43ce8015ca7475 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 16 Apr 2009 12:20:24 +0200
Subject: [PATCH 0302/1421] ALSA: hda - Fix headphone-detection on some
 machines with STAC/IDT codecs

When the headphone can have no unique DAC, the current code doesn't
check the HP-detection although it should.  Put the hp-detection check
before the DAC check to fix this bug.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index ce30b459aee..917bc5d3ac2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3076,6 +3076,11 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs,
 	unsigned int wid_caps;
 
 	for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
+		if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
+			wid_caps = get_wcaps(codec, pins[i]);
+			if (wid_caps & AC_WCAP_UNSOL_CAP)
+				spec->hp_detect = 1;
+		}
 		nid = dac_nids[i];
 		if (!nid)
 			continue;
@@ -3119,11 +3124,6 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs,
 			err = create_controls_idx(codec, name, idx, nid, 3);
 			if (err < 0)
 				return err;
-			if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
-				wid_caps = get_wcaps(codec, pins[i]);
-				if (wid_caps & AC_WCAP_UNSOL_CAP)
-					spec->hp_detect = 1;
-			}
 		}
 	}
 	return 0;
-- 
GitLab


From db756394064f4059e2f542fc0d27e91ce57bf292 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Tue, 10 Mar 2009 23:21:48 +0000
Subject: [PATCH 0303/1421] [ARM] S3C: Export s3c_gpio_cfgpin and
 s3c_gpio_setpull for modules

Add an export of the two GPIO configuration calls
s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules
to use them (such as ASoC drivers)

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/gpio-config.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 7642b975a99..08044dec973 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -13,6 +13,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 
@@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
 
 	return ret;
 }
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
 
 int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 {
@@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 
 	return ret;
 }
+EXPORT_SYMBOL(s3c_gpio_setpull);
 
 #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
 int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
-- 
GitLab


From 289a689b109dfd086c0459fb35b32a1d96bdb8ce Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Tue, 31 Mar 2009 12:16:59 +0200
Subject: [PATCH 0304/1421] imx21: fixes some clocknames

Signed-off-by: <hs4233@mail.mn-solutions.de>
---
 arch/arm/mach-mx2/clock_imx21.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 2dee5c87614..cbc5dbb9e14 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -919,17 +919,17 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
 	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
-	_REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
 	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
 	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
 	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
-- 
GitLab


From 1b3c9bf2cd00e1e8a47177b92900dcff363843cb Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Wed, 1 Apr 2009 13:58:21 +0200
Subject: [PATCH 0305/1421] imx21: activate i2c

Set the correct clkdev-name for the i2c clock.

It also get's rid of the ARCH_NR_GPIOS define on the rationale
that isn't an ARCH-wide setting anyway. If a device has two
pca953x devices, the reserved number will be wrong.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
---
 arch/arm/mach-mx2/clock_imx21.c       | 2 +-
 arch/arm/plat-mxc/include/mach/mx21.h | 3 ---
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index cbc5dbb9e14..999d013e06e 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -931,7 +931,7 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK(NULL, "owire", owire_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index e8c4cf56c24..8b070a041a9 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -54,9 +54,6 @@
 
 #define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(6*32 + 16)
-
 /* fixed interrupt numbers */
 #define MXC_INT_USBCTRL         58
 #define MXC_INT_USBCTRL         58
-- 
GitLab


From f8e5143be765b2c60b9ae96477560d3f46be5e99 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 4 Apr 2009 13:40:39 +0200
Subject: [PATCH 0306/1421] pcm037 board support: Fix eth interrupt gpio
 setting

gpio_direction_input needs the gpio number, not the pin description.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c3648eff513..b5227d837b2 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -226,10 +226,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
-	/* SMSC9215 IRQ pin */
+	/* LAN9217 IRQ pin */
 	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
 				"pcm037-eth"))
-		gpio_direction_input(MX31_PIN_GPIO3_1);
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
-- 
GitLab


From 4bd962987daad2d9ec83f92b2b5351a80fb8ea68 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:31:54 +0100
Subject: [PATCH 0307/1421] MX31: Add more alternate pin definitions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index ab838cfe94f..f4849bcb7c6 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -518,6 +518,8 @@ enum iomux_pins {
  */
 #define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SCLK__RTS3	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SPI_RDY__CTS3	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
@@ -585,6 +587,18 @@ enum iomux_pins {
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
GitLab


From c5c96f4dce83f00f587f9ee6b8679ff2ab469971 Mon Sep 17 00:00:00 2001
From: Vladimir Barinov <vbarinov@embeddedalley.com>
Date: Wed, 1 Apr 2009 16:07:14 +0400
Subject: [PATCH 0308/1421] MX31: Add I2C pin definitions

Add I2C pin definitions for MX31 SoC

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index f4849bcb7c6..01dc362afdd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -587,6 +587,9 @@ enum iomux_pins {
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-- 
GitLab


From c44af41ad5dc3e26b138ddf2e399cfdd0dc2008c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 1 Apr 2009 16:18:25 +0200
Subject: [PATCH 0309/1421] MX31: pin definition for sdhc2

This also adds the pins used on mx31moboard for WP and CD

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 01dc362afdd..f68fb87228a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -560,6 +560,16 @@ enum iomux_pins {
 #define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_LD0__LD0		IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LD1__LD1		IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LD2__LD2		IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
-- 
GitLab


From d5f281043ae3e955430dcaa92905327587b4d17a Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 1 Apr 2009 16:32:41 +0200
Subject: [PATCH 0310/1421] mx31: pin definition for csi

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index f68fb87228a..57e927a1fd3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -600,6 +600,27 @@ enum iomux_pins {
 #define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-- 
GitLab


From 470f9b602e3b5fa5d5fb62c8c5b648d2139e7976 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Mon, 6 Apr 2009 16:40:52 +0300
Subject: [PATCH 0311/1421] MXC: remove orphan imx_init_uart() definition

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/imx-uart.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 83fb72c4048..599217b2e13 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -27,6 +27,4 @@ struct imxuart_platform_data {
 	unsigned int flags;
 };
 
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
 #endif
-- 
GitLab


From 9070e7afb80473c2b5c932152391b52e1e89c637 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 13 Apr 2009 13:02:36 +0100
Subject: [PATCH 0312/1421] mx31ads: imoux pins should be passed in as unsigned
 int

To match the mxc_iomux_setup_multiple_pins() prototype.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-mx3/mx31ads.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 83e5e8e1276..26bfe368013 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
-- 
GitLab


From 248ca85f0135dcb03bc054cd172453b36aad6571 Mon Sep 17 00:00:00 2001
From: Ilya Yanok <yanok@emcraft.com>
Date: Sat, 14 Mar 2009 21:51:59 +0300
Subject: [PATCH 0313/1421] qong: remove AIPS[12] mappings from
 machine-specific iotable

AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
---
 arch/arm/mach-mx3/qong.c | 28 +---------------------------
 1 file changed, 1 insertion(+), 27 deletions(-)

diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 6c4283cec6f..5a01e48fd8f 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -250,32 +250,6 @@ static void __init qong_init_fpga(void)
 	qong_init_dnet();
 }
 
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
-	{
-		.virtual = AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length = AIPS1_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
-		.virtual = AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length = AIPS2_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
 /*
  * Board specific initialization.
  */
@@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = qong_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
-- 
GitLab


From 3fa6dd6a7aa7ce1a7d490ef88c2c8ec7db0f196b Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Wed, 8 Apr 2009 11:15:00 +0300
Subject: [PATCH 0314/1421] MX1ADS: remove I2C ifdefs

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
---
 arch/arm/mach-mx1/mx1ads.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 7ae229bc1b7..e54057fb855 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -28,9 +28,7 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
 #include <mach/iomux.h>
 #include "devices.h"
 
@@ -114,7 +112,6 @@ static struct platform_device flash_device = {
  * I2C
  */
 
-#ifdef CONFIG_I2C_IMX
 static int i2c_pins[] = {
 	PA15_PF_I2C_SDA,
 	PA16_PF_I2C_SCL,
@@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
 		.platform_data = &pcf857x_data[1],
 	},
 };
-#endif
 
 /*
  * Board init
@@ -172,12 +168,10 @@ static void __init mx1ads_init(void)
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
 
 	/* I2C */
-#ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
 	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
 }
 
 static void __init mx1ads_timer_init(void)
-- 
GitLab


From 3f2030163efe4a7ee820ae56dab9a4db8c1ebb49 Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Wed, 8 Apr 2009 16:17:50 +0300
Subject: [PATCH 0315/1421] Fix ifdef in plat-mxc/irc.c

Move ifdef under function brackets. This fixes compile crach when IRQ priorities
are disabled.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
---
 arch/arm/plat-mxc/include/mach/irqs.h |  2 +-
 arch/arm/plat-mxc/irq.c               | 14 +++++++++-----
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index c02b8fc2d82..518a36504b8 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -45,7 +45,7 @@
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
-extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
 #define FIQ_START	0
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 6e7578a3514..0fb68a531f5 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -50,23 +50,27 @@
 #define IIM_PROD_REV_SH		3
 #define IIM_PROD_REV_LEN	5
 
-#ifdef CONFIG_MXC_IRQ_PRIOR
-void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
+#ifdef CONFIG_MXC_IRQ_PRIOR
 	unsigned int temp;
 	unsigned int mask = 0x0F << irq % 8 * 4;
 
-	if (irq > 63)
-		return;
+	if (irq >= MXC_INTERNAL_IRQS)
+		return -EINVAL;;
 
 	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
 	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+
+	return 0;
+#else
+	return -ENOSYS;
+#endif
 }
 EXPORT_SYMBOL(imx_irq_set_priority);
-#endif
 
 #ifdef CONFIG_FIQ
 int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
-- 
GitLab


From 132d3f950e4dbc4e4315e44e7abc85f8aba469fd Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 14 Apr 2009 11:25:18 +0100
Subject: [PATCH 0316/1421] mx31ads: Depend on all the WM8350 core dependencies
 for WM1133-EV1 board

Otherwise we'd need massive ifdefs in the code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-mx3/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index d6235583e97..194b8428bba 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -19,6 +19,8 @@ config MACH_MX31ADS
 config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help
-- 
GitLab


From 0ac402fdaa4569604e802018922ae7cdbe0fc63b Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 13 Apr 2009 13:05:28 +0100
Subject: [PATCH 0317/1421] mx31ads: Mark as having full regulatoion
 constraints with 1133-EV1 board

This allows the regulator API to power off unused regulators at the end
of init.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-mx3/mx31ads.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 26bfe368013..a6d6efefa6a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
 
-- 
GitLab


From c5ab660db9a98187667d017bb9425f0c1dc76ac1 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 8 Apr 2009 11:39:34 +0200
Subject: [PATCH 0318/1421] mxc defconfig updates

This patch removes several i.MX board specific defconfig files in favour
for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files
have all currently available boards, i.MX specific drivers and the network
device drivers for the boards enabled.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/imx27ads_defconfig           | 826 ------------------
 .../{mx31ads_defconfig => mx1_defconfig}      | 536 +++++++++---
 .../{pcm038_defconfig => mx27_defconfig}      | 354 ++++++--
 .../{mx31litekit_defconfig => mx3_defconfig}  | 783 +++++++++--------
 arch/arm/configs/pcm037_defconfig             | 769 ----------------
 5 files changed, 1065 insertions(+), 2203 deletions(-)
 delete mode 100644 arch/arm/configs/imx27ads_defconfig
 rename arch/arm/configs/{mx31ads_defconfig => mx1_defconfig} (60%)
 rename arch/arm/configs/{pcm038_defconfig => mx27_defconfig} (77%)
 rename arch/arm/configs/{mx31litekit_defconfig => mx3_defconfig} (61%)
 delete mode 100644 arch/arm/configs/pcm037_defconfig

diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
deleted file mode 100644
index bcd95b8dd2d..00000000000
--- a/arch/arm/configs/imx27ads_defconfig
+++ /dev/null
@@ -1,826 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig
similarity index 60%
rename from arch/arm/configs/mx31ads_defconfig
rename to arch/arm/configs/mx1_defconfig
index e05271753e1..0200d67e30b 100644
--- a/arch/arm/configs/mx31ads_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:11:33 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
 
 #
 # Freescale MXC Implementations
 #
+CONFIG_ARCH_MX1=y
 # CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MX3 is not set
 
 #
-# MX3 Options
+# MX1 platforms:
 #
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_OUTER_CACHE is not set
 
 #
@@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -250,6 +262,11 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -257,24 +274,30 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 #
 # At least one emulation must be selected
 #
-CONFIG_VFP=y
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -283,11 +306,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -446,16 +455,14 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -502,7 +537,10 @@ CONFIG_MII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
 
 #
 # SPI GPIO expanders:
 #
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# Sound
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
 #
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -642,6 +853,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig
similarity index 77%
rename from arch/arm/configs/pcm038_defconfig
rename to arch/arm/configs/mx27_defconfig
index 41429a00f58..083516cd0d7 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 10:18:06 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -88,11 +99,10 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
 # CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
+# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
 
 #
-# MX2 Platforms
+# MX2 platforms:
 #
-# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
@@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -254,6 +267,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -261,24 +279,33 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -451,6 +477,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=y
 CONFIG_MEDIA_TUNER_TDA8290=y
 CONFIG_MEDIA_TUNER_TDA9887=y
@@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y
 CONFIG_MEDIA_TUNER_MT20XX=y
 CONFIG_MEDIA_TUNER_XC2028=y
 CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
 # CONFIG_SOC_CAMERA is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -732,8 +829,12 @@ CONFIG_FB=y
 #
 # Frame buffer hardware drivers
 #
+CONFIG_FB_IMX=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -843,6 +973,11 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig
similarity index 61%
rename from arch/arm/configs/mx31litekit_defconfig
rename to arch/arm/configs/mx3_defconfig
index 4f41c413568..72a8201a537 100644
--- a/arch/arm/configs/mx31litekit_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,17 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 14:23:39 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:06:37 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,11 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -55,27 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -85,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -116,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -126,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -142,46 +150,54 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
+CONFIG_ARCH_MX31=y
 
 #
-# MX3 Options
+# MX3 platforms:
 #
-# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31ADS=y
+CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_PCM037=y
 CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y
@@ -200,45 +216,50 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -250,6 +271,11 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -257,27 +283,31 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 #
 # At least one emulation must be selected
 #
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -286,11 +316,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,12 +334,11 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -327,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -336,7 +361,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,14 +374,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -369,18 +390,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -404,36 +423,31 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -451,17 +465,14 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -476,63 +487,58 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -541,16 +547,10 @@ CONFIG_MII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# USB Network Adapters
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -562,43 +562,7 @@ CONFIG_MII=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -609,10 +573,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -624,45 +585,132 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Watchdog Device Drivers
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SOFT_WATCHDOG is not set
 
 #
-# USB-based Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# Sonics Silicon Backplane
+# PCI GPIO expanders:
 #
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=y
+CONFIG_MFD_WM8350_CONFIG_MODE_0=y
+CONFIG_MFD_WM8352_CONFIG_MODE_0=y
+CONFIG_MFD_WM8350_I2C=y
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -673,7 +721,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 CONFIG_VIDEO_DEV=y
 CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
 CONFIG_VIDEO_MEDIA=y
@@ -682,34 +730,38 @@ CONFIG_VIDEO_MEDIA=y
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_MX3=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -719,9 +771,10 @@ CONFIG_DAB=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -739,131 +792,79 @@ CONFIG_FB=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_MX3=y
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# Miscellaneous USB options
+# MMC/SD/SDIO Card Drivers
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
 
 #
-# USB port drivers
+# DMA Devices
 #
-# CONFIG_USB_SERIAL is not set
+CONFIG_MX3_IPU=y
+CONFIG_MX3_IPU_IRQS=4
+CONFIG_DMA_ENGINE=y
 
 #
-# USB Miscellaneous drivers
+# DMA Clients
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_WM8350=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -872,6 +873,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -890,15 +896,13 @@ CONFIG_INOTIFY_USER=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -917,25 +921,30 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -954,65 +963,70 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1027,7 +1041,7 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -1046,8 +1060,12 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1064,7 +1082,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -1077,24 +1095,31 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
deleted file mode 100644
index 6e37c77c476..00000000000
--- a/arch/arm/configs/pcm037_defconfig
+++ /dev/null
@@ -1,769 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 25 11:52:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_PCM037=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-- 
GitLab


From 4dc1f87f079d5c6b01284d08b28eff2c4fbd15c4 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 16 Apr 2009 14:19:19 +0200
Subject: [PATCH 0319/1421] ALSA: hda - Add upper-limit of mixer amp for
 AD1884A-laptop model, too

Add the upper-limit of mixer amp for AD1884A-laptop model just like
the mobile model for some HP laptops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_analog.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 38ad3f7b040..9bcd8ab5a27 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3977,6 +3977,14 @@ static int patch_ad1884a(struct hda_codec *codec)
 		spec->input_mux = &ad1884a_laptop_capture_source;
 		codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
 		codec->patch_ops.init = ad1884a_hp_init;
+		/* set the upper-limit for mixer amp to 0dB for avoiding the
+		 * possible damage by overloading
+		 */
+		snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+					  (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+					  (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+					  (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+					  (1 << AC_AMPCAP_MUTE_SHIFT));
 		break;
 	case AD1884A_MOBILE:
 		spec->mixers[0] = ad1884a_mobile_mixers;
-- 
GitLab


From a5735b7ede1d1ca81ebf491d699530715b105560 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 15 Apr 2009 20:24:45 +0200
Subject: [PATCH 0320/1421] ASoC: pxa-ssp: allow setting of dai format 0

pxa_ssp_set_dai_fmt() currently has an early exit if the desired format
equals the current configuration. This is correct behaviour unless this
function is called with a zero value parameter for the first time.
Zero is a valid value for this function, but the early exit is bogus in
this case.

Hence, set priv->dai_fmt to -1 in the beginning so we can configure the
port.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: pHilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/pxa/pxa-ssp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index c7c1996a544..152118cb5d6 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -806,6 +806,7 @@ static int pxa_ssp_probe(struct platform_device *pdev,
 		goto err_priv;
 	}
 
+	priv->dai_fmt = (unsigned int) -1;
 	dai->private_data = priv;
 
 	return 0;
-- 
GitLab


From 01c4cad4f76cebdb4d0db37a9775554478fb7149 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 16 Apr 2009 10:32:20 +0100
Subject: [PATCH 0321/1421] ASoC: Fix jive_wm8750.c build problems

Fix build errors in sound/soc/s3c24xx/jive_wm8750.c
from changes to ASoC.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/jive_wm8750.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 32063790d95..93e6c87b739 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -69,8 +69,8 @@ static int jive_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
-	s3c_i2sv2_calc_rate(&div, NULL, params_rate(params),
-			    s3c2412_get_iisclk());
+	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+				s3c2412_get_iisclk());
 
 	/* set codec DAI configuration */
 	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
@@ -145,8 +145,9 @@ static struct snd_soc_dai_link jive_dai = {
 };
 
 /* jive audio machine driver */
-static struct snd_soc_machine snd_soc_machine_jive = {
+static struct snd_soc_card snd_soc_machine_jive = {
 	.name		= "Jive",
+	.platform	= &s3c24xx_soc_platform,
 	.dai_link	= &jive_dai,
 	.num_links	= 1,
 };
@@ -157,9 +158,8 @@ static struct wm8750_setup_data jive_wm8750_setup = {
 
 /* jive audio subsystem */
 static struct snd_soc_device jive_snd_devdata = {
-	.machine	= &snd_soc_machine_jive,
-	.platform	= &s3c24xx_soc_platform,
-	.codec_dev	= &soc_codec_dev_wm8750_spi,
+	.card		= &snd_soc_machine_jive,
+	.codec_dev	= &soc_codec_dev_wm8750,
 	.codec_data	= &jive_wm8750_setup,
 };
 
-- 
GitLab


From 1d2b7ae9a0994c166014e9a07a61d9cfee6215a0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 16 Apr 2009 10:32:23 +0100
Subject: [PATCH 0322/1421] ASoC: s3c-i2s-v2.c fix for s3c_i2sv2_iis_calc_rate

The definition of s3c_i2sv2_iis_calc_rate was never
renamed from s3c2412_iis_calc_rate, so rename this
to allow the build to work.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/s3c-i2s-v2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 295a4c91026..545cfff85fb 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -473,9 +473,9 @@ static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
 /* default table of all avaialable root fs divisors */
 static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
 
-int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
-			  unsigned int *fstab,
-			  unsigned int rate, struct clk *clk)
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+			    unsigned int *fstab,
+			    unsigned int rate, struct clk *clk)
 {
 	unsigned long clkrate = clk_get_rate(clk);
 	unsigned int div;
@@ -531,7 +531,7 @@ int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
 
 int s3c_i2sv2_probe(struct platform_device *pdev,
 		    struct snd_soc_dai *dai,
-- 
GitLab


From 3715c6aaa913d9fb044b9eb36d957a8d2703723a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 16 Apr 2009 10:32:22 +0100
Subject: [PATCH 0323/1421] ASoC: Fix s3c-i2s-v2.c snd_soc_dai changes

Fix the build error in s3c-i2s-v2.c caused by
a change to the snd_soc_dai ops field.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/s3c-i2s-v2.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 545cfff85fb..689ffcd17e1 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -624,10 +624,12 @@ static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
 
 int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
 {
-	dai->ops.trigger = s3c2412_i2s_trigger;
-	dai->ops.hw_params = s3c2412_i2s_hw_params;
-	dai->ops.set_fmt = s3c2412_i2s_set_fmt;
-	dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv;
+	struct snd_soc_dai_ops *ops = dai->ops;
+
+	ops->trigger = s3c2412_i2s_trigger;
+	ops->hw_params = s3c2412_i2s_hw_params;
+	ops->set_fmt = s3c2412_i2s_set_fmt;
+	ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
 
 	dai->suspend = s3c2412_i2s_suspend;
 	dai->resume = s3c2412_i2s_resume;
-- 
GitLab


From 76fff3680286d3f7f1ced5e38d613deff86caf20 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 16 Apr 2009 10:32:21 +0100
Subject: [PATCH 0324/1421] ASoC: Fix include build error in s3c2412-i2s.c

Fix accidental change of <mach/regs-gpio.h> to
<plat/regs-gpio.h> in s3c2412-i2s.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/s3c2412-i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 1ca3cdaa821..b7e0b3f0bfc 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -33,8 +33,8 @@
 
 #include <plat/regs-s3c2412-iis.h>
 
-#include <plat/regs-gpio.h>
 #include <plat/audio.h>
+#include <mach/regs-gpio.h>
 #include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
-- 
GitLab


From 36ce85824549c1aece65478bf9fe2d224ae06f86 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Wed, 15 Apr 2009 13:48:16 +0300
Subject: [PATCH 0325/1421] ASoC: OMAP: Fix DSP_B format in OMAP McBSP DAI
 driver

The DSP format wasn't still correct in OMAP McBSP DAI even after the commit
bd25867a6cbe7a00ef7dbe8d9ddebc91b00b9b3f.

Thanks to Peter Ujfalusi <peter.ujfalusi@nokia.com> for noticing and being
part of the fix. Now the FS length definition is more clear by defining
it with  FWID(0).

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/omap/omap-mcbsp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 9c09b94f0cf..90f4df7fd90 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -283,7 +283,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		regs->srgr2	|= FPER(wlen * channels - 1);
-		regs->srgr1	|= FWID(wlen * channels - 2);
+		regs->srgr1	|= FWID(0);
 		break;
 	}
 
@@ -302,6 +302,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 {
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
+	unsigned int temp_fmt = fmt;
 
 	if (mcbsp_data->configured)
 		return 0;
@@ -328,6 +329,8 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		/* 0-bit data delay */
 		regs->rcr2      |= RDATDLY(0);
 		regs->xcr2      |= XDATDLY(0);
+		/* Invert FS polarity configuration */
+		temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
 		break;
 	default:
 		/* Unsupported data format */
@@ -351,7 +354,7 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	}
 
 	/* Set bit clock (CLKX/CLKR) and FS polarities */
-	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_NB_NF:
 		/*
 		 * Normal BCLK + FS.
-- 
GitLab


From 002fbad829883a3ad9b185077f9e54c37dc7502d Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Wed, 15 Apr 2009 13:48:17 +0300
Subject: [PATCH 0326/1421] ASoC: OMAP: Fix FS polarity in OSK5912 machine
 driver

Using inverted FS polarity in OSK5912 must be an error since TLV320AIC23
do not have support for inverted polarities. This is mostly due the hassle
with the DSP formats in OMAP McBSP DAI and inversion on OMAP side probably
just made this configuration working at some point.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/omap/osk5912.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index a952a4eb336..a4e149b7f0e 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -62,7 +62,7 @@ static int osk_hw_params(struct snd_pcm_substream *substream,
 	/* Set codec DAI configuration */
 	err = snd_soc_dai_set_fmt(codec_dai,
 				  SND_SOC_DAIFMT_DSP_B |
-				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_NB_NF |
 				  SND_SOC_DAIFMT_CBM_CFM);
 	if (err < 0) {
 		printk(KERN_ERR "can't set codec DAI configuration\n");
@@ -72,7 +72,7 @@ static int osk_hw_params(struct snd_pcm_substream *substream,
 	/* Set cpu DAI configuration */
 	err = snd_soc_dai_set_fmt(cpu_dai,
 				  SND_SOC_DAIFMT_DSP_B |
-				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_NB_NF |
 				  SND_SOC_DAIFMT_CBM_CFM);
 	if (err < 0) {
 		printk(KERN_ERR "can't set cpu DAI configuration\n");
-- 
GitLab


From d4275354993eb6ed6a45cfd01a39dcb0cce3793b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 16 Apr 2009 14:05:27 +0100
Subject: [PATCH 0327/1421] Update MAINTAINERS

Update rmk's email address, and expand on what he's responsible for.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 71 +++++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 63 insertions(+), 8 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0cb20d82169..1ba1bfdf00f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -543,6 +543,14 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:	Orphan
 F:	drivers/mmc/host/mmci.*
@@ -592,6 +600,13 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/CLKDEV SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+F:	arch/arm/common/clkdev.c
+F:	arch/arm/include/asm/clkdev.h
+
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	mike@compulab.co.il
@@ -610,6 +625,15 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 
+ARM/EBSA110 MACHINE SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/mach-ebsa110/
+F:	drivers/net/arm/am79c961a.*
+
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 P:	Daniel Ribeiro
 M:	drwyrm@gmail.com
@@ -627,6 +651,15 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/FOOTBRIDGE ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/include/asm/hardware/dec21285.h
+F:	arch/arm/mach-footbridge/
+
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 P:	Sascha Hauer
 M:	kernel@pengutronix.de
@@ -767,19 +800,27 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/RISCPC ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/common/time-acorn.c
+F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
+F:	arch/arm/include/asm/hardware/ioc.h
+F:	arch/arm/include/asm/hardware/iomd.h
+F:	arch/arm/include/asm/hardware/memc.h
+F:	arch/arm/mach-rpc/
+F:	drivers/net/arm/ether*
+F:	drivers/scsi/arm/
+
 ARM/SHARK MACHINE SUPPORT
 P:	Alexander Schulz
 M:	alex@shark-linux.de
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
-ARM/STRONGARM110 PORT
-P:	Russell King
-M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
-W:	http://www.arm.linux.org.uk/
-S:	Maintained
-
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
@@ -813,6 +854,14 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/VFP SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/vfp/
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -1372,6 +1421,11 @@ S:	Maintained
 F:	Documentation/input/cs461x.txt
 F:	sound/pci/cs46xx/
 
+CLK API
+P:	Russell King
+M:	linux@arm.linux.org.uk
+F:	include/linux/clk.h
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1576,7 +1630,8 @@ F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
 P:	Russell King
-M:	rmk@arm.linux.org.uk
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
-- 
GitLab


From f69955855eac55a048d26a1618f50dfaa160a006 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Wed, 15 Apr 2009 13:22:37 -0400
Subject: [PATCH 0328/1421] Export filemap_write_and_wait_range

This wasn't exported before and is useful (used by the experimental ext3
data=guarded code)

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Acked-by: Theodore Tso <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/filemap.c b/mm/filemap.c
index 8bd498040f3..379ff0bcbf6 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -441,6 +441,7 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 	}
 	return err;
 }
+EXPORT_SYMBOL(filemap_write_and_wait_range);
 
 /**
  * add_to_page_cache_locked - add a locked page to the pagecache
-- 
GitLab


From 35c80d5f400f68f2eccf3069d1c068e154bde9c9 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Wed, 15 Apr 2009 13:22:38 -0400
Subject: [PATCH 0329/1421] Add block_write_full_page_endio for passing endio
 handler

block_write_full_page doesn't allow the caller to control what happens
when the IO is over.  This adds a new call named block_write_full_page_endio
so the buffer head end_io handler can be provided by the caller.

This will be used by the ext3 data=guarded mode to do i_size updates in
a workqueue based end_io handler.  end_buffer_async_write is also
exported so it can be called to do the dirty work of managing page
writeback for the higher level end_io handler.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Acked-by: Theodore Tso <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/buffer.c                 | 45 ++++++++++++++++++++++++++++---------
 include/linux/buffer_head.h |  3 +++
 2 files changed, 37 insertions(+), 11 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index ff8bb1f2333..b3e5be7514f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -360,7 +360,7 @@ still_busy:
  * Completion handler for block_write_full_page() - pages which are unlocked
  * during I/O, and which have PageWriteback cleared upon I/O completion.
  */
-static void end_buffer_async_write(struct buffer_head *bh, int uptodate)
+void end_buffer_async_write(struct buffer_head *bh, int uptodate)
 {
 	char b[BDEVNAME_SIZE];
 	unsigned long flags;
@@ -438,11 +438,17 @@ static void mark_buffer_async_read(struct buffer_head *bh)
 	set_buffer_async_read(bh);
 }
 
-void mark_buffer_async_write(struct buffer_head *bh)
+void mark_buffer_async_write_endio(struct buffer_head *bh,
+				   bh_end_io_t *handler)
 {
-	bh->b_end_io = end_buffer_async_write;
+	bh->b_end_io = handler;
 	set_buffer_async_write(bh);
 }
+
+void mark_buffer_async_write(struct buffer_head *bh)
+{
+	mark_buffer_async_write_endio(bh, end_buffer_async_write);
+}
 EXPORT_SYMBOL(mark_buffer_async_write);
 
 
@@ -1615,7 +1621,8 @@ EXPORT_SYMBOL(unmap_underlying_metadata);
  * unplugging the device queue.
  */
 static int __block_write_full_page(struct inode *inode, struct page *page,
-			get_block_t *get_block, struct writeback_control *wbc)
+			get_block_t *get_block, struct writeback_control *wbc,
+			bh_end_io_t *handler)
 {
 	int err;
 	sector_t block;
@@ -1700,7 +1707,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page,
 			continue;
 		}
 		if (test_clear_buffer_dirty(bh)) {
-			mark_buffer_async_write(bh);
+			mark_buffer_async_write_endio(bh, handler);
 		} else {
 			unlock_buffer(bh);
 		}
@@ -1753,7 +1760,7 @@ recover:
 		if (buffer_mapped(bh) && buffer_dirty(bh) &&
 		    !buffer_delay(bh)) {
 			lock_buffer(bh);
-			mark_buffer_async_write(bh);
+			mark_buffer_async_write_endio(bh, handler);
 		} else {
 			/*
 			 * The buffer may have been set dirty during
@@ -2679,7 +2686,8 @@ int nobh_writepage(struct page *page, get_block_t *get_block,
 out:
 	ret = mpage_writepage(page, get_block, wbc);
 	if (ret == -EAGAIN)
-		ret = __block_write_full_page(inode, page, get_block, wbc);
+		ret = __block_write_full_page(inode, page, get_block, wbc,
+					      end_buffer_async_write);
 	return ret;
 }
 EXPORT_SYMBOL(nobh_writepage);
@@ -2837,9 +2845,10 @@ out:
 
 /*
  * The generic ->writepage function for buffer-backed address_spaces
+ * this form passes in the end_io handler used to finish the IO.
  */
-int block_write_full_page(struct page *page, get_block_t *get_block,
-			struct writeback_control *wbc)
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc, bh_end_io_t *handler)
 {
 	struct inode * const inode = page->mapping->host;
 	loff_t i_size = i_size_read(inode);
@@ -2848,7 +2857,8 @@ int block_write_full_page(struct page *page, get_block_t *get_block,
 
 	/* Is the page fully inside i_size? */
 	if (page->index < end_index)
-		return __block_write_full_page(inode, page, get_block, wbc);
+		return __block_write_full_page(inode, page, get_block, wbc,
+					       handler);
 
 	/* Is the page fully outside i_size? (truncate in progress) */
 	offset = i_size & (PAGE_CACHE_SIZE-1);
@@ -2871,9 +2881,20 @@ int block_write_full_page(struct page *page, get_block_t *get_block,
 	 * writes to that region are not written out to the file."
 	 */
 	zero_user_segment(page, offset, PAGE_CACHE_SIZE);
-	return __block_write_full_page(inode, page, get_block, wbc);
+	return __block_write_full_page(inode, page, get_block, wbc, handler);
 }
 
+/*
+ * The generic ->writepage function for buffer-backed address_spaces
+ */
+int block_write_full_page(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc)
+{
+	return block_write_full_page_endio(page, get_block, wbc,
+					   end_buffer_async_write);
+}
+
+
 sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
 			    get_block_t *get_block)
 {
@@ -3342,9 +3363,11 @@ EXPORT_SYMBOL(block_read_full_page);
 EXPORT_SYMBOL(block_sync_page);
 EXPORT_SYMBOL(block_truncate_page);
 EXPORT_SYMBOL(block_write_full_page);
+EXPORT_SYMBOL(block_write_full_page_endio);
 EXPORT_SYMBOL(cont_write_begin);
 EXPORT_SYMBOL(end_buffer_read_sync);
 EXPORT_SYMBOL(end_buffer_write_sync);
+EXPORT_SYMBOL(end_buffer_async_write);
 EXPORT_SYMBOL(file_fsync);
 EXPORT_SYMBOL(generic_block_bmap);
 EXPORT_SYMBOL(generic_cont_expand_simple);
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 7b73bb8f197..16ed0284d78 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -155,6 +155,7 @@ void create_empty_buffers(struct page *, unsigned long,
 			unsigned long b_state);
 void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
 void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
 
 /* Things to do with buffers at mapping->private_list */
 void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
@@ -197,6 +198,8 @@ extern int buffer_heads_over_limit;
 void block_invalidatepage(struct page *page, unsigned long offset);
 int block_write_full_page(struct page *page, get_block_t *get_block,
 				struct writeback_control *wbc);
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc, bh_end_io_t *handler);
 int block_read_full_page(struct page*, get_block_t*);
 int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
 				unsigned long from);
-- 
GitLab


From 8cd50e8e2b416c7f07b267ab3457c6c25a540ba9 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 16 Apr 2009 16:09:08 +0100
Subject: [PATCH 0330/1421] [ARM] remove .gitignore from include/asm-arm

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/.gitignore | 2 --
 1 file changed, 2 deletions(-)
 delete mode 100644 include/asm-arm/.gitignore

diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore
deleted file mode 100644
index e02c15d158f..00000000000
--- a/include/asm-arm/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-arch
-mach-types.h
-- 
GitLab


From 412401029259b1ad67559cec93bcc7ee4a9551aa Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 16 Apr 2009 09:58:44 -0600
Subject: [PATCH 0331/1421] powerpc/5200: Bring the legacy
 fsl_spi_platform_data hooks back

In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx:
rework chip selects handling"), I merged activate_cs and deactivate_cs
hooks into cs_control, but I overlooked that mpc52xx_psc_spi driver
is using these hooks too. And that resulted in the following build
failure:

CC      drivers/spi/mpc52xx_psc_spi.o
drivers/spi/mpc52xx_psc_spi.c: In function 'mpc52xx_psc_spi_do_probe':
drivers/spi/mpc52xx_psc_spi.c:398: error: 'struct fsl_spi_platform_data'
has no member named 'activate_cs'
drivers/spi/mpc52xx_psc_spi.c:399: error: 'struct fsl_spi_platform_data'
has no member named 'deactivate_cs'
make[2]: *** [drivers/spi/mpc52xx_psc_spi.o] Error 1

This patch simply adds the legacy hooks back for 2.6.30, and for
2.6.31 we'll convert the driver to ->cs_control.

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 include/linux/fsl_devices.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index f2a78b5e8b5..0cde1806cfa 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -83,6 +83,10 @@ struct fsl_spi_platform_data {
 	u16	max_chipselect;
 	void	(*cs_control)(struct spi_device *spi, bool on);
 	u32	sysclk;
+
+	/* Legacy hooks, used by mpc52xx_psc_spi driver. */
+	void	(*activate_cs)(u8 cs, u8 polarity);
+	void	(*deactivate_cs)(u8 cs, u8 polarity);
 };
 
 struct mpc8xx_pcmcia_ops {
-- 
GitLab


From 5e075cb5cee4faecc82e2b8a04e640176629976e Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 16 Apr 2009 17:56:10 +0100
Subject: [PATCH 0332/1421] [ARM] 5454/1: ep93xx_eth: fix sparse warnings

Fix 50+ sparse warnings in the ep93xx ethernet driver.

  warning: incorrect type in argument 1 (different address spaces)

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/arm/ep93xx_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index cc7708775da..c140c9bb767 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -153,7 +153,7 @@ struct ep93xx_descs
 struct ep93xx_priv
 {
 	struct resource		*res;
-	void			*base_addr;
+	void __iomem		*base_addr;
 	int			irq;
 
 	struct ep93xx_descs	*descs;
-- 
GitLab


From 4ea3c51d5bd3bb4eea7d7d3a1f80d1a48c2a6f92 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Thu, 16 Apr 2009 07:53:09 -0500
Subject: [PATCH 0333/1421] x86: UV BAU distribution and payload MMRs

This patch correctly sets BAU memory mapped registers to point
to the sending activation descriptor table and target payload table.

The "Broadcast Assist Unit" is used for TLB shootdown in UV.

The memory mapped registers that point to sending and receiving
memory structures contain node numbers.

In one case the __pa() function did not provide the node id of
memory on blade zero in configurations where that id is nonzero.
In another case, it was assumed that memory was allocated on
the local node.  That assumption is not true in a configuration
in which the node has no memory.

Tested on the UV hardware simulator.

[ Impact: fix possible runtime crash due to incorrect TLB logic ]

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1LuR5Z-0007An-B8@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 98307f95349..78422336dde 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -717,7 +717,7 @@ uv_activation_descriptor_init(int node, int pnode)
 	adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
 	BUG_ON(!adp);
 
-	pa = __pa((unsigned long)adp);
+	pa = uv_gpa(adp); /* need the real nasid*/
 	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
@@ -754,6 +754,8 @@ static struct bau_payload_queue_entry * __init
 uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
 {
 	struct bau_payload_queue_entry *pqp;
+	unsigned long pa;
+	int pn;
 	char *cp;
 
 	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
@@ -764,10 +766,14 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
 	cp = (char *)pqp + 31;
 	pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
 	bau_tablesp->va_queue_first = pqp;
+	/*
+	 * need the pnode of where the memory was really allocated
+	 */
+	pa = uv_gpa(pqp);
+	pn = pa >> uv_nshift;
 	uv_write_global_mmr64(pnode,
 			      UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
-			      ((unsigned long)pnode <<
-			       UV_PAYLOADQ_PNODE_SHIFT) |
+			      ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
 			      uv_physnodeaddr(pqp));
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
 			      uv_physnodeaddr(pqp));
-- 
GitLab


From f544847fbaf099278343f875987a983f2b913134 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Tue, 14 Apr 2009 14:17:47 -0700
Subject: [PATCH 0334/1421] drm/i915: allow tiled front buffers on 965+

This patch corrects a pretty big oversight in the KMS code for 965+
chips.  The current code is missing tiled surface register programming,
so userland can allocate a tiled surface and use it for mode setting,
resulting in corruption.  This patch fixes that, allowing for tiled
front buffers on 965+.

Cc: stable@kernel.org
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_reg.h      | 1 +
 drivers/gpu/drm/i915/intel_display.c | 9 +++++++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e805b590ae7..52119473226 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1446,6 +1446,7 @@
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_TILED			(1<<10)
 #define DSPAADDR		0x70184
 #define DSPASTRIDE		0x70188
 #define DSPAPOS			0x7018C /* reserved */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c2c8e95ff14..bdcda36953b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -657,6 +657,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
 	int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
 	int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF);
 	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
 	u32 dspcntr, alignment;
 	int ret;
@@ -733,6 +734,13 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
+	if (IS_I965G(dev)) {
+		if (obj_priv->tiling_mode != I915_TILING_NONE)
+			dspcntr |= DISPPLANE_TILED;
+		else
+			dspcntr &= ~DISPPLANE_TILED;
+	}
+
 	I915_WRITE(dspcntr_reg, dspcntr);
 
 	Start = obj_priv->gtt_offset;
@@ -745,6 +753,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		I915_READ(dspbase);
 		I915_WRITE(dspsurf, Start);
 		I915_READ(dspsurf);
+		I915_WRITE(dsptileoff, (y << 16) | x);
 	} else {
 		I915_WRITE(dspbase, Start + Offset);
 		I915_READ(dspbase);
-- 
GitLab


From c4cb768f027706b3a0190309416b13f07114fe56 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 14 Apr 2009 18:08:37 -0300
Subject: [PATCH 0335/1421] [IA64] export smp_send_reschedule

KVM will use smp_send_reschedule to force a cpu out of guest mode.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/smp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 2ea4199d9c5..c2d982385dc 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -225,6 +225,7 @@ smp_send_reschedule (int cpu)
 {
 	platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
 }
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
 
 /*
  * Called with preemption disabled.
-- 
GitLab


From edb91dc01a216e84b78721b71a06db1e0db141b7 Mon Sep 17 00:00:00 2001
From: Dimitri Sivanich <sivanich@sgi.com>
Date: Wed, 15 Apr 2009 10:56:25 -0500
Subject: [PATCH 0336/1421] [IA64] smp_flush_tlb_mm() should only send IPI's to
 cpus in cpu_vm_mask

Having flush_tlb_mm->smp_flush_tlb_mm() send an IPI to every cpu
on the system is occasionally triggering spin_lock contention in
generic_smp_call_function_interrupt().

Follow x86 arch's lead and only sends IPIs to the cpus in mm->cpu_vm_mask.

Experiments with this change have shown significant improvement in this
contention issue.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/smp.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index c2d982385dc..5230eaafd83 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -301,15 +301,12 @@ smp_flush_tlb_mm (struct mm_struct *mm)
 		return;
 	}
 
+	smp_call_function_mask(mm->cpu_vm_mask,
+		(void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
+	local_irq_disable();
+	local_finish_flush_tlb_mm(mm);
+	local_irq_enable();
 	preempt_enable();
-	/*
-	 * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
-	 * have been running in the address space.  It's not clear that this is worth the
-	 * trouble though: to avoid races, we have to raise the IPI on the target CPU
-	 * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
-	 * rather trivial.
-	 */
-	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
-- 
GitLab


From 79b42babbac2a5a522b8e269fb2811b6e1063030 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 15 Apr 2009 06:21:10 +0900
Subject: [PATCH 0337/1421] libata: handle SEMB signature better

WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7
and Serial ATA II standards and reports 3c/c3 signature which now is
assigned to SEMB.  Make ata_dev_classify() report ATA_DEV_SEMB on the
sig and let ata_dev_read_id() work around it by trying IDENTIFY once.

This fixes bko#11579.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Haun <drhaun88@gmail.com>
Reported-by: Lars Wirzenius <liw@liw.fi>
Reported-by: Juan Manuel <jmcarranza@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 065507c4664..a61af3818c8 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1231,6 +1231,9 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 	 *
 	 * We follow the current spec and consider that 0x69/0x96
 	 * identifies a port multiplier and 0x3c/0xc3 a SEMB device.
+	 * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
+	 * SEMB signature.  This is worked around in
+	 * ata_dev_read_id().
 	 */
 	if ((tf->lbam == 0) && (tf->lbah == 0)) {
 		DPRINTK("found ATA device by sig\n");
@@ -1248,8 +1251,8 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 	}
 
 	if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
-		printk(KERN_INFO "ata: SEMB device ignored\n");
-		return ATA_DEV_SEMB_UNSUP; /* not yet */
+		DPRINTK("found SEMB device by sig (could be ATA device)\n");
+		return ATA_DEV_SEMB;
 	}
 
 	DPRINTK("unknown device\n");
@@ -2080,6 +2083,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	struct ata_taskfile tf;
 	unsigned int err_mask = 0;
 	const char *reason;
+	bool is_semb = class == ATA_DEV_SEMB;
 	int may_fallback = 1, tried_spinup = 0;
 	int rc;
 
@@ -2090,6 +2094,8 @@ retry:
 	ata_tf_init(dev, &tf);
 
 	switch (class) {
+	case ATA_DEV_SEMB:
+		class = ATA_DEV_ATA;	/* some hard drives report SEMB sig */
 	case ATA_DEV_ATA:
 		tf.command = ATA_CMD_ID_ATA;
 		break;
@@ -2126,6 +2132,14 @@ retry:
 			return -ENOENT;
 		}
 
+		if (is_semb) {
+			ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
+				       "device w/ SEMB sig, disabled\n");
+			/* SEMB is not supported yet */
+			*p_class = ATA_DEV_SEMB_UNSUP;
+			return 0;
+		}
+
 		if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
 			/* Device or controller might have reported
 			 * the wrong device class.  Give a shot at the
-- 
GitLab


From 265b7215aed36941620b65ecfff516200fb190c1 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Tue, 14 Apr 2009 18:39:14 +0400
Subject: [PATCH 0338/1421] pata_hpt37x: fix HPT370 DMA timeouts

The libata driver has copied the code from the IDE driver which caused a post
2.4.18 regression on many HPT370[A] chips -- DMA stopped to work completely,
only causing timeouts.  Now remove hpt370_bmdma_start() for good...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_hpt37x.c | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 81ab57003ab..122c786449a 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
- * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009	MontaVista Software, Inc.
  *
  * TODO
  *	Look into engine reset on timeout errors. Should not be	required.
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.11"
+#define DRV_VERSION	"0.6.12"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -444,23 +444,6 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
-/**
- *	hpt370_bmdma_start		-	DMA engine begin
- *	@qc: ATA command
- *
- *	The 370 and 370A want us to reset the DMA engine each time we
- *	use it. The 372 and later are fine.
- */
-
-static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
-	udelay(10);
-	ata_bmdma_start(qc);
-}
-
 /**
  *	hpt370_bmdma_end		-	DMA engine stop
  *	@qc: ATA command
@@ -598,7 +581,6 @@ static struct scsi_host_template hpt37x_sht = {
 static struct ata_port_operations hpt370_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
-	.bmdma_start 	= hpt370_bmdma_start,
 	.bmdma_stop	= hpt370_bmdma_stop,
 
 	.mode_filter	= hpt370_filter,
-- 
GitLab


From 20cbf5f8c0fe3df2ddbde1f334993b4dda18a651 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 14 Apr 2009 12:59:03 +0900
Subject: [PATCH 0339/1421] pata_legacy: fix no device fail path

When pata_legacy can't detect any device, it unregisters the
platform_device and fails detection.  However, it forgets to detach
ata host triggering weird failures as the host later gets freed by
devres while still attached.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_legacy.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 3f830f0fe2c..0c6dde80417 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -1032,6 +1032,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 			return 0;
 		}
 	}
+	ata_host_detach(host);
 fail:
 	platform_device_unregister(pdev);
 	return ret;
-- 
GitLab


From 62afe5d744047df8ff15a369f4c1ebad71c937d4 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 13 Apr 2009 20:50:00 +0400
Subject: [PATCH 0340/1421] libata: use ATA_ID_CFA_*

Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a61af3818c8..17c5d48a75d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1656,8 +1656,8 @@ unsigned long ata_id_xfermask(const u16 *id)
 		/*
 		 *	Process compact flash extended modes
 		 */
-		int pio = id[163] & 0x7;
-		int dma = (id[163] >> 3) & 7;
+		int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
+		int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
 
 		if (pio)
 			pio_mask |= (1 << 5);
@@ -2426,7 +2426,8 @@ int ata_dev_configure(struct ata_device *dev)
 	/* ATA-specific feature tests */
 	if (dev->class == ATA_DEV_ATA) {
 		if (ata_id_is_cfa(id)) {
-			if (id[162] & 1) /* CPRM may make this media unusable */
+			/* CPRM may make this media unusable */
+			if (id[ATA_ID_CFA_KEY_MGMT] & 1)
 				ata_dev_printk(dev, KERN_WARNING,
 					       "supports DRM functions and may "
 					       "not be fully accessable.\n");
-- 
GitLab


From e3cf95dd6d352954b663d2934110d6e30af2406d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 9 Apr 2009 17:31:17 +0100
Subject: [PATCH 0341/1421] ata: Report 16/32bit PIO as best we can

The legacy old IDE ioctl API for this is a bit primitive so we try
and map stuff sensibly onto it.

- Set PIO over DMA devices to report 32bit
- Add ability to change the PIO32 settings if the controller permits it
- Add that functionality into the sff drivers
- Add that functionality into the VLB legacy driver
- Turn on the 32bit PIO on the ninja32 and add support there

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c  | 30 ++++++++++++++++++++++++++----
 drivers/ata/libata-sff.c   | 27 +++++++++++++++++++++++++++
 drivers/ata/pata_legacy.c  | 33 ++++++++++++++++++++-------------
 drivers/ata/pata_ninja32.c |  4 +++-
 include/linux/libata.h     |  8 ++++++++
 5 files changed, 84 insertions(+), 18 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b9747fa59e5..2733b0c90b7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -647,23 +647,45 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
 	return rc;
 }
 
+static int ata_ioc32(struct ata_port *ap)
+{
+	if (ap->flags & ATA_FLAG_PIO_DMA)
+		return 1;
+	if (ap->pflags & ATA_PFLAG_PIO32)
+		return 1;
+	return 0;
+}
+
 int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
 		     int cmd, void __user *arg)
 {
 	int val = -EINVAL, rc = -EINVAL;
+	unsigned long flags;
 
 	switch (cmd) {
 	case ATA_IOC_GET_IO32:
-		val = 0;
+		spin_lock_irqsave(ap->lock, flags);
+		val = ata_ioc32(ap);
+		spin_unlock_irqrestore(ap->lock, flags);
 		if (copy_to_user(arg, &val, 1))
 			return -EFAULT;
 		return 0;
 
 	case ATA_IOC_SET_IO32:
 		val = (unsigned long) arg;
-		if (val != 0)
-			return -EINVAL;
-		return 0;
+		rc = 0;
+		spin_lock_irqsave(ap->lock, flags);
+		if (ap->pflags & ATA_PFLAG_PIO32CHANGE) {
+			if (val)
+				ap->pflags |= ATA_PFLAG_PIO32;
+			else
+				ap->pflags &= ~ATA_PFLAG_PIO32;
+		} else {
+			if (val != ata_ioc32(ap))
+				rc = -EINVAL;
+		}
+		spin_unlock_irqrestore(ap->lock, flags);
+		return rc;
 
 	case HDIO_GET_IDENTITY:
 		return ata_get_identity(ap, scsidev, arg);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 8332e97a9de..bb18415d3d6 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -87,6 +87,7 @@ const struct ata_port_operations ata_bmdma32_port_ops = {
 	.inherits		= &ata_bmdma_port_ops,
 
 	.sff_data_xfer		= ata_sff_data_xfer32,
+	.port_start		= ata_sff_port_start32,
 };
 EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
 
@@ -769,6 +770,9 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
 	void __iomem *data_addr = ap->ioaddr.data_addr;
 	unsigned int words = buflen >> 2;
 	int slop = buflen & 3;
+	
+	if (!(ap->pflags & ATA_PFLAG_PIO32))
+		return ata_sff_data_xfer(dev, buf, buflen, rw);
 
 	/* Transfer multiple of 4 bytes */
 	if (rw == READ)
@@ -2401,6 +2405,29 @@ int ata_sff_port_start(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_sff_port_start);
 
+/**
+ *	ata_sff_port_start32 - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.  Allocates space for PRD table if the device
+ *	is DMA capable SFF.
+ *
+ *	May be used as the port_start() entry in ata_port_operations for
+ *	devices that are capable of 32bit PIO.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+int ata_sff_port_start32(struct ata_port *ap)
+{
+	ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+	if (ap->ioaddr.bmdma_addr)
+		return ata_port_start(ap);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_start32);
+
 /**
  *	ata_sff_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 0c6dde80417..6f985bed8cb 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -108,6 +108,7 @@ struct legacy_controller {
 	struct ata_port_operations *ops;
 	unsigned int pio_mask;
 	unsigned int flags;
+	unsigned int pflags;
 	int (*setup)(struct platform_device *, struct legacy_probe *probe,
 		struct legacy_data *data);
 };
@@ -285,7 +286,8 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 {
 	int slop = buflen & 3;
 	/* 32bit I/O capable *and* we need to write a whole number of dwords */
-	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
+	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
+					&& (ap->pflags & ATA_PFLAG_PIO32)) {
 		struct ata_port *ap = dev->link->ap;
 		unsigned long flags;
 
@@ -736,7 +738,8 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
 	struct ata_port *ap = adev->link->ap;
 	int slop = buflen & 3;
 
-	if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
+	if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)
+					&& (ap->pflags & ATA_PFLAG_PIO32)) {
 		if (rw == WRITE)
 			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 		else
@@ -858,27 +861,30 @@ static struct ata_port_operations winbond_port_ops = {
 
 static struct legacy_controller controllers[] = {
 	{"BIOS",	&legacy_port_ops, 	0x1F,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"Snooping", 	&simple_port_ops, 	0x1F,
-						0	       ,	NULL },
+			0,			0,			NULL },
 	{"PDC20230",	&pdc20230_port_ops,	0x7,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,
+			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE,	NULL },
 	{"HT6560A",	&ht6560a_port_ops,	0x07,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"HT6560B",	&ht6560b_port_ops,	0x1F,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"OPTI82C611A",	&opti82c611a_port_ops,	0x0F,
-						0	       ,	NULL },
+			0,			0,			NULL },
 	{"OPTI82C46X",	&opti82c46x_port_ops,	0x0F,
-						0	       ,	NULL },
+			0,			0,			NULL },
 	{"QDI6500",	&qdi6500_port_ops,	0x07,
-					ATA_FLAG_NO_IORDY,	qdi_port },
+			ATA_FLAG_NO_IORDY,
+			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE,    qdi_port },
 	{"QDI6580",	&qdi6580_port_ops,	0x1F,
-					0	       ,	qdi_port },
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port },
 	{"QDI6580DP",	&qdi6580dp_port_ops,	0x1F,
-					0	       ,	qdi_port },
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port },
 	{"W83759A",	&winbond_port_ops,	0x1F,
-					0	       ,	winbond_port }
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE,
+								winbond_port }
 };
 
 /**
@@ -1008,6 +1014,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 	ap->ops = ops;
 	ap->pio_mask = pio_modes;
 	ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+	ap->pflags |= controller->pflags;
 	ap->ioaddr.cmd_addr = io_addr;
 	ap->ioaddr.altstatus_addr = ctrl_addr;
 	ap->ioaddr.ctl_addr = ctrl_addr;
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 0fb6b1b1e63..dd53a66b19e 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.3"
+#define DRV_VERSION "0.1.5"
 
 
 /**
@@ -86,6 +86,7 @@ static struct ata_port_operations ninja32_port_ops = {
 	.sff_dev_select = ninja32_dev_select,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ninja32_set_piomode,
+	.sff_data_xfer	= ata_sff_data_xfer32
 };
 
 static void ninja32_program(void __iomem *base)
@@ -144,6 +145,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	ap->ioaddr.altstatus_addr = base + 0x1E;
 	ap->ioaddr.bmdma_addr = base;
 	ata_sff_std_ports(&ap->ioaddr);
+	ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
 
 	ninja32_program(base);
 	/* FIXME: Should we disable them at remove ? */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b450a262885..3d501db36a2 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -209,6 +209,7 @@ enum {
 
 	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
 
+
 	/* struct ata_port pflags */
 	ATA_PFLAG_EH_PENDING	= (1 << 0), /* EH pending */
 	ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
@@ -225,6 +226,9 @@ enum {
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
 
+	ATA_PFLAG_PIO32		= (1 << 20),  /* 32bit PIO */
+	ATA_PFLAG_PIO32CHANGE	= (1 << 21),  /* 32bit PIO can be turned on/off */
+
 	/* struct ata_queued_cmd flags */
 	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
 	ATA_QCFLAG_DMAMAP	= (1 << 1), /* SG table is DMA mapped */
@@ -689,7 +693,10 @@ struct ata_port {
 	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
 	struct ata_port_operations *ops;
 	spinlock_t		*lock;
+	/* Flags owned by the EH context. Only EH should touch these once the
+	   port is active */
 	unsigned long		flags;	/* ATA_FLAG_xxx */
+	/* Flags that change dynamically, protected by ap->lock */
 	unsigned int		pflags; /* ATA_PFLAG_xxx */
 	unsigned int		print_id; /* user visible unique port ID */
 	unsigned int		port_no; /* 0 based port no. inside the host */
@@ -1595,6 +1602,7 @@ extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
 extern void ata_sff_error_handler(struct ata_port *ap);
 extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
 extern int ata_sff_port_start(struct ata_port *ap);
+extern int ata_sff_port_start32(struct ata_port *ap);
 extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
 extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
 					   unsigned long xfer_mask);
-- 
GitLab


From 77f4025b5e7b290f5c3cc03aa6242328694c71d4 Mon Sep 17 00:00:00 2001
From: Linus Walleij <triad@df.lth.se>
Date: Thu, 16 Apr 2009 21:17:56 +0100
Subject: [PATCH 0342/1421] [ARM] 5455/1: Fix IRQ noise from VIC code

The VIC code will attempt to perform som
default set_irq_chip() and set_irq_chip_data()
on all IRQs supported by the VIC, while the new
IRQ handling code strictly checks for the global
NR_IRQS to be respected also for these IRQs.

This patch will respect the interrupt mask passed
to the VIC driver and will prevent it from
attempting to call these functions on any unused
interrupts.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ecf0bfbab10..b2a781d9ce0 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-
-		set_irq_chip(irq, &vic_chip);
-		set_irq_chip_data(irq, base);
-
 		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
 			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
-- 
GitLab


From efcc2da3fd148c9acb7d7cf1d9800e0649f950fc Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 16 Apr 2009 15:11:54 -0600
Subject: [PATCH 0343/1421] powerpc/of-device-tree: Factor MTD physmap bindings
 out of booting-without-of

It's easier to find bindings descriptions in separate files.  So factor
out the MTD physmap bindings into a separate file to not clutter
booting-without-of.txt more.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 Documentation/powerpc/booting-without-of.txt  | 89 +++----------------
 .../powerpc/dts-bindings/mtd-physmap.txt      | 63 +++++++++++++
 2 files changed, 75 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/mtd-physmap.txt

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 0ab0230cbcb..d16b7a1c379 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -43,12 +43,11 @@ Table of Contents
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) CFI or JEDEC memory-mapped NOR flash
-      d) 4xx/Axon EMAC ethernet nodes
-      e) Xilinx IP cores
-      f) USB EHCI controllers
-      g) MDIO on GPIOs
-      h) SPI busses
+      c) 4xx/Axon EMAC ethernet nodes
+      d) Xilinx IP cores
+      e) USB EHCI controllers
+      f) MDIO on GPIOs
+      g) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -999,7 +998,7 @@ compatibility.
       translation of SOC addresses for memory mapped SOC registers.
     - bus-frequency: Contains the bus frequency for the SOC node.
       Typically, the value of this field is filled in by the boot
-      loader. 
+      loader.
 
 
   Recommended properties:
@@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model.
 		device_type = "open-pic";
 	};
 
-   c) CFI or JEDEC memory-mapped NOR flash
-
-    Flash chips (Memory Technology Devices) are often used for solid state
-    file systems on embedded devices.
-
-     - compatible : should contain the specific model of flash chip(s)
-       used, if known, followed by either "cfi-flash" or "jedec-flash"
-     - reg : Address range of the flash chip
-     - bank-width : Width (in bytes) of the flash bank.  Equal to the
-       device width times the number of interleaved chips.
-     - device-width : (optional) Width of a single flash chip.  If
-       omitted, assumed to be equal to 'bank-width'.
-     - #address-cells, #size-cells : Must be present if the flash has
-       sub-nodes representing partitions (see below).  In this case
-       both #address-cells and #size-cells must be equal to 1.
-
-    For JEDEC compatible devices, the following additional properties
-    are defined:
-
-     - vendor-id : Contains the flash chip's vendor id (1 byte).
-     - device-id : Contains the flash chip's device id (1 byte).
-
-    In addition to the information on the flash bank itself, the
-    device tree may optionally contain additional information
-    describing partitions of the flash address space.  This can be
-    used on platforms which have strong conventions about which
-    portions of the flash are used for what purposes, but which don't
-    use an on-flash partition table such as RedBoot.
-
-    Each partition is represented as a sub-node of the flash device.
-    Each node's name represents the name of the corresponding
-    partition of the flash device.
-
-    Flash partitions
-     - reg : The partition's offset and size within the flash bank.
-     - label : (optional) The label / name for this flash partition.
-       If omitted, the label is taken from the node name (excluding
-       the unit address).
-     - read-only : (optional) This parameter, if present, is a hint to
-       Linux that this flash partition should only be mounted
-       read-only.  This is usually used for flash partitions
-       containing early-boot firmware images or data which should not
-       be clobbered.
-
-    Example:
-
-	flash@ff000000 {
-		compatible = "amd,am29lv128ml", "cfi-flash";
-		reg = <ff000000 01000000>;
-		bank-width = <4>;
-		device-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		fs@0 {
-			label = "fs";
-			reg = <0 f80000>;
-		};
-		firmware@f80000 {
-			label ="firmware";
-			reg = <f80000 80000>;
-			read-only;
-		};
-	};
-
-    d) 4xx/Axon EMAC ethernet nodes
+    c) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model.
 			   available.
 			   For Axon: 0x0000012a
 
-   e) Xilinx IP cores
+   d) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model.
       listed above, nodes for these devices should include a phy-handle
       property, and may include other common network device properties
       like local-mac-address.
-      
+
       iv) Xilinx Uartlite
 
       Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model.
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    f) USB EHCI controllers
+    e) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-   g) MDIO on GPIOs
+   f) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    h) SPI (Serial Peripheral Interface) busses
+    g) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this
diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
new file mode 100644
index 00000000000..cd474f9aef3
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -0,0 +1,63 @@
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+   used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range of the flash chip
+ - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip.  If
+   omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+   sub-nodes representing partitions (see below).  In this case
+   both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space.  This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+   If omitted, the label is taken from the node name (excluding
+   the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+   Linux that this flash partition should only be mounted
+   read-only.  This is usually used for flash partitions
+   containing early-boot firmware images or data which should not
+   be clobbered.
+
+Example:
+
+	flash@ff000000 {
+		compatible = "amd,am29lv128ml", "cfi-flash";
+		reg = <ff000000 01000000>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		fs@0 {
+			label = "fs";
+			reg = <0 f80000>;
+		};
+		firmware@f80000 {
+			label ="firmware";
+			reg = <f80000 80000>;
+			read-only;
+		};
+	};
-- 
GitLab


From c5a88dd90cf243a17c4a8c10e1ed973192ea5825 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 16 Apr 2009 15:11:54 -0600
Subject: [PATCH 0344/1421] powerpc/device-tree: Document MTD nodes with
 multiple "reg" tuples

Add binding for mtd nodes with multiple reg tuples.  Multiple reg tuples
are used when the flash region covers multiple devices of the same type,
but not necessarily the same size.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 .../powerpc/dts-bindings/mtd-physmap.txt      | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
index cd474f9aef3..667c9bde869 100644
--- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -5,7 +5,9 @@ file systems on embedded devices.
 
  - compatible : should contain the specific model of flash chip(s)
    used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range of the flash chip
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
  - bank-width : Width (in bytes) of the flash bank.  Equal to the
    device width times the number of interleaved chips.
  - device-width : (optional) Width of a single flash chip.  If
@@ -61,3 +63,18 @@ Example:
 			read-only;
 		};
 	};
+
+Here an example with multiple "reg" tuples:
+
+	flash@f0000000,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,PC48F4400P0VB", "cfi-flash";
+		reg = <0 0x00000000 0x02000000
+		       0 0x02000000 0x02000000>;
+		bank-width = <2>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};
-- 
GitLab


From bda9de2c4fff8d7e9ac3ee66ce853716280a21ea Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 16 Apr 2009 15:11:54 -0600
Subject: [PATCH 0345/1421] powerpc/5200: Add FLASH nodes to lite5200 device
 tree

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/boot/dts/lite5200b.dts | 39 +++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index c63e3566479..d13cb11ce62 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -293,4 +293,43 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xfe000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <1>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "rootfs";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "u-boot";
+				reg = <0x01f00000 0x00060000>;
+			};
+			partition@1f60000 {
+				label = "u-boot-env";
+				reg = <0x01f60000 0x00020000>;
+			};
+			partition@1f80000 {
+				label = "dtb";
+				reg = <0x01f80000 0x00080000>;
+			};
+		};
+	};
+
 };
-- 
GitLab


From 05f54c13cd0c33694eec39a265475c5d6cf223cf Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Thu, 16 Apr 2009 21:55:29 +0100
Subject: [PATCH 0346/1421] Revert "kobject: don't block for each
 kobject_uevent".

This reverts commit f520360d93cdc37de5d972dac4bf3bdef6a7f6a7.

Tetsuo Handa, running a kernel with CONFIG_DEBUG_PAGEALLOC=y and
CONFIG_UEVENT_HELPER_PATH=/sbin/hotplug, has been hitting RCU detected
CPU stalls: it's been spinning in the loop where do_execve() counts up
the args (but why wasn't fixup_exception working? dunno).

The recent change, switching kobject_uevent_env() from UMH_WAIT_EXEC
to UMH_NO_WAIT, is broken: the exec uses args on the local stack here,
and an env which is kfreed as soon as call_usermodehelper() returns.
It very much needs to wait for the exec to be done.

An alternative would be to keep the UMH_NO_WAIT, and complicate the code
to allocate and free these resources correctly? but no, as GregKH
pointed out when making the commit, CONFIG_UEVENT_HELPER_PATH="" is a
much better optimization - though some distros are still saying
/sbin/hotplug in their .config, yet with no such binary in their initrd
or their root.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/kobject_uevent.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 97a777ad4f5..dafeecf5b14 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -258,7 +258,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 			goto exit;
 
 		retval = call_usermodehelper(argv[0], argv,
-					     env->envp, UMH_NO_WAIT);
+					     env->envp, UMH_WAIT_EXEC);
 	}
 
 exit:
-- 
GitLab


From 05fa199d45c54a9bda7aa3ae6537253d6f097aa9 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Thu, 16 Apr 2009 21:58:12 +0100
Subject: [PATCH 0347/1421] mm: pass correct mm when growing stack

Tetsuo Handa reports seeing the WARN_ON(current->mm == NULL) in
security_vm_enough_memory(), when do_execve() is touching the
target mm's stack, to set up its args and environment.

Yes, a UMH_NO_WAIT or UMH_WAIT_PROC call_usermodehelper() spawns
an mm-less kernel thread to do the exec.  And in any case, that
vm_enough_memory check when growing stack ought to be done on the
target mm, not on the execer's mm (though apart from the warning,
it only makes a slight tweak to OVERCOMMIT_NEVER behaviour).

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/mmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/mmap.c b/mm/mmap.c
index 4a3841186c1..3303d1ba8e8 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1575,7 +1575,7 @@ static int acct_stack_growth(struct vm_area_struct *vma, unsigned long size, uns
 	 * Overcommit..  This must be the final test, as it will
 	 * update security statistics.
 	 */
-	if (security_vm_enough_memory(grow))
+	if (security_vm_enough_memory_mm(mm, grow))
 		return -ENOMEM;
 
 	/* Ok, everything looks good - let it rip */
-- 
GitLab


From 4b065046273afa01ec8e3de7da407e8d3599251d Mon Sep 17 00:00:00 2001
From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Date: Wed, 8 Apr 2009 15:37:16 -0700
Subject: [PATCH 0348/1421] x86, PAT: Remove page granularity tracking for
 vm_insert_pfn maps

This change resolves the problem of too many single page entries
in pat_memtype_list and "freeing invalid memtype" errors with i915,
reported here:

  http://marc.info/?l=linux-kernel&m=123845244713183&w=2

Remove page level granularity track and untrack of vm_insert_pfn.
memtype tracking at page granularity does not scale and cleaner
approach would be for the driver to request a type for a bigger
IO address range or PCI io memory range for that device, either at
mmap time or driver init time and just use that type during
vm_insert_pfn.

This patch just removes the track/untrack of vm_insert_pfn. That
means we will be in same state as 2.6.28, with respect to these APIs.

Newer APIs for the drivers to request a memtype for a bigger region
is coming soon.

[ Impact: fix Xorg startup warnings and hangs ]

Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Tested-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <20090408223716.GC3493@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 98 +++++++++--------------------------------------
 1 file changed, 19 insertions(+), 79 deletions(-)

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index cc5e0e24e44..41c80571815 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -669,29 +669,28 @@ static void free_pfn_range(u64 paddr, unsigned long size)
  *
  * If the vma has a linear pfn mapping for the entire range, we get the prot
  * from pte and reserve the entire vma range with single reserve_pfn_range call.
- * Otherwise, we reserve the entire vma range, my ging through the PTEs page
- * by page to get physical address and protection.
  */
 int track_pfn_vma_copy(struct vm_area_struct *vma)
 {
-	int retval = 0;
-	unsigned long i, j;
 	resource_size_t paddr;
 	unsigned long prot;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
 	if (!pat_enabled)
 		return 0;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/*
 		 * reserve the whole chunk covered by vma. We need the
 		 * starting address and protection from pte.
 		 */
-		if (follow_phys(vma, vma_start, 0, &prot, &paddr)) {
+		if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
 			WARN_ON_ONCE(1);
 			return -EINVAL;
 		}
@@ -699,28 +698,7 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 		return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
 	}
 
-	/* reserve entire vma page by page, using pfn and prot from pte */
-	for (i = 0; i < vma_size; i += PAGE_SIZE) {
-		if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
-			continue;
-
-		pgprot = __pgprot(prot);
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
-		if (retval)
-			goto cleanup_ret;
-	}
 	return 0;
-
-cleanup_ret:
-	/* Reserve error: Cleanup partial reservation and return error */
-	for (j = 0; j < i; j += PAGE_SIZE) {
-		if (follow_phys(vma, vma_start + j, 0, &prot, &paddr))
-			continue;
-
-		free_pfn_range(paddr, PAGE_SIZE);
-	}
-
-	return retval;
 }
 
 /*
@@ -730,50 +708,28 @@ cleanup_ret:
  * prot is passed in as a parameter for the new mapping. If the vma has a
  * linear pfn mapping for the entire range reserve the entire vma range with
  * single reserve_pfn_range call.
- * Otherwise, we look t the pfn and size and reserve only the specified range
- * page by page.
- *
- * Note that this function can be called with caller trying to map only a
- * subrange/page inside the vma.
  */
 int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
-	int retval = 0;
-	unsigned long i, j;
-	resource_size_t base_paddr;
 	resource_size_t paddr;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
 	if (!pat_enabled)
 		return 0;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
-	/* reserve page by page using pfn and size */
-	base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
-	for (i = 0; i < size; i += PAGE_SIZE) {
-		paddr = base_paddr + i;
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
-		if (retval)
-			goto cleanup_ret;
-	}
 	return 0;
-
-cleanup_ret:
-	/* Reserve error: Cleanup partial reservation and return error */
-	for (j = 0; j < i; j += PAGE_SIZE) {
-		paddr = base_paddr + j;
-		free_pfn_range(paddr, PAGE_SIZE);
-	}
-
-	return retval;
 }
 
 /*
@@ -784,39 +740,23 @@ cleanup_ret:
 void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 			unsigned long size)
 {
-	unsigned long i;
 	resource_size_t paddr;
-	unsigned long prot;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
 	if (!pat_enabled)
 		return;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* free the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		free_pfn_range(paddr, vma_size);
 		return;
 	}
-
-	if (size != 0 && size != vma_size) {
-		/* free page by page, using pfn and size */
-		paddr = (resource_size_t)pfn << PAGE_SHIFT;
-		for (i = 0; i < size; i += PAGE_SIZE) {
-			paddr = paddr + i;
-			free_pfn_range(paddr, PAGE_SIZE);
-		}
-	} else {
-		/* free entire vma, page by page, using the pfn from pte */
-		for (i = 0; i < vma_size; i += PAGE_SIZE) {
-			if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
-				continue;
-
-			free_pfn_range(paddr, PAGE_SIZE);
-		}
-	}
 }
 
 pgprot_t pgprot_writecombine(pgprot_t prot)
-- 
GitLab


From 381512cf3d27f63f7a45b1bbe7d2d609c2ea3b74 Mon Sep 17 00:00:00 2001
From: Gautham R Shenoy <ego@in.ibm.com>
Date: Tue, 14 Apr 2009 09:09:36 +0530
Subject: [PATCH 0349/1421] sched: Avoid printing sched_group::__cpu_power for
 default case

Commit 46e0bb9c12f4 ("sched: Print sched_group::__cpu_power
in sched_domain_debug") produces a messy dmesg output while
attempting to print the sched_group::__cpu_power for each
group in the sched_domain hierarchy.

Fix this by avoid printing the __cpu_power for default cases.
(i.e, __cpu_power == SCHED_LOAD_SCALE).

[ Impact: reduce syslog clutter ]

Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Fixed-by: Tony Luck <tony.luck@intel.com>
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20090414033936.GA534@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index e90e70ed36a..b902e587a3a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7367,8 +7367,12 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
 		cpumask_or(groupmask, groupmask, sched_group_cpus(group));
 
 		cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
-		printk(KERN_CONT " %s (__cpu_power = %d)", str,
-						group->__cpu_power);
+
+		printk(KERN_CONT " %s", str);
+		if (group->__cpu_power != SCHED_LOAD_SCALE) {
+			printk(KERN_CONT " (__cpu_power = %d)",
+				group->__cpu_power);
+		}
 
 		group = group->next;
 	} while (group != sd->groups);
-- 
GitLab


From 0917798d82212f884fff650e7e520de3b438f947 Mon Sep 17 00:00:00 2001
From: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Date: Wed, 15 Apr 2009 16:51:48 +0200
Subject: [PATCH 0350/1421] x86: fix microcode driver newly spewing warnings

Jeff Garzik reported this WARN_ON() noise:

> Kernel: 2.6.30-rc1-00306-g8371f87
> Hardware: ICH10 x86-64
>
> This is a regression from 2.6.29.  Microcode spews the following WARNING
> multiple times during boot:
>
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/group.c:138 sysfs_remove_group+0xeb/0xf0()
> Hardware name:         sysfs group ffffffffa0209700 not found for
>  kobject 'cpu0'

Keep sysfs files around for cpus even when we failed to locate
microcode for them at the moment of module loading. The appropriate
microcode firmware can become available later on.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/microcode_core.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index a0f3851ef31..4d420de9ac6 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -391,8 +391,6 @@ static int mc_sysdev_add(struct sys_device *sys_dev)
 		return err;
 
 	err = microcode_init_cpu(cpu);
-	if (err)
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 
 	return err;
 }
-- 
GitLab


From d110271e1f4140a9fb06d968b1afe9ca56a6064e Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Wed, 25 Mar 2009 15:11:36 -0600
Subject: [PATCH 0351/1421] sysfs: don't use global workqueue in
 sysfs_schedule_callback()

A sysfs attribute using sysfs_schedule_callback() to commit suicide
may end up calling device_unregister(), which will eventually call
a driver's ->remove function.

Drivers may call flush_scheduled_work() in their shutdown routines,
in which case lockdep will complain with something like the following:

  =============================================
  [ INFO: possible recursive locking detected ]
  2.6.29-rc8-kk #1
  ---------------------------------------------
  events/4/56 is trying to acquire lock:
  (events){--..}, at: [<ffffffff80257fc0>] flush_workqueue+0x0/0xa0

  but task is already holding lock:
  (events){--..}, at: [<ffffffff80257648>] run_workqueue+0x108/0x230

  other info that might help us debug this:
  3 locks held by events/4/56:
  #0:  (events){--..}, at: [<ffffffff80257648>] run_workqueue+0x108/0x230
  #1:  (&ss->work){--..}, at: [<ffffffff80257648>] run_workqueue+0x108/0x230
  #2:  (pci_remove_rescan_mutex){--..}, at: [<ffffffff803c10d1>] remove_callback+0x21/0x40

  stack backtrace:
  Pid: 56, comm: events/4 Not tainted 2.6.29-rc8-kk #1
  Call Trace:
  [<ffffffff8026dfcd>] validate_chain+0xb7d/0x1260
  [<ffffffff8026eade>] __lock_acquire+0x42e/0xa40
  [<ffffffff8026f148>] lock_acquire+0x58/0x80
  [<ffffffff80257fc0>] ? flush_workqueue+0x0/0xa0
  [<ffffffff8025800d>] flush_workqueue+0x4d/0xa0
  [<ffffffff80257fc0>] ? flush_workqueue+0x0/0xa0
  [<ffffffff80258070>] flush_scheduled_work+0x10/0x20
  [<ffffffffa0144065>] e1000_remove+0x55/0xfe [e1000e]
  [<ffffffff8033ee30>] ? sysfs_schedule_callback_work+0x0/0x50
  [<ffffffff803bfeb2>] pci_device_remove+0x32/0x70
  [<ffffffff80441da9>] __device_release_driver+0x59/0x90
  [<ffffffff80441edb>] device_release_driver+0x2b/0x40
  [<ffffffff804419d6>] bus_remove_device+0xa6/0x120
  [<ffffffff8043e46b>] device_del+0x12b/0x190
  [<ffffffff8043e4f6>] device_unregister+0x26/0x70
  [<ffffffff803ba969>] pci_stop_dev+0x49/0x60
  [<ffffffff803baab0>] pci_remove_bus_device+0x40/0xc0
  [<ffffffff803c10d9>] remove_callback+0x29/0x40
  [<ffffffff8033ee4f>] sysfs_schedule_callback_work+0x1f/0x50
  [<ffffffff8025769a>] run_workqueue+0x15a/0x230
  [<ffffffff80257648>] ? run_workqueue+0x108/0x230
  [<ffffffff8025846f>] worker_thread+0x9f/0x100
  [<ffffffff8025bce0>] ? autoremove_wake_function+0x0/0x40
  [<ffffffff802583d0>] ? worker_thread+0x0/0x100
  [<ffffffff8025b89d>] kthread+0x4d/0x80
  [<ffffffff8020d4ba>] child_rip+0xa/0x20
  [<ffffffff8020cebc>] ? restore_args+0x0/0x30
  [<ffffffff8025b850>] ? kthread+0x0/0x80
  [<ffffffff8020d4b0>] ? child_rip+0x0/0x20

Although we know that the device_unregister path will never acquire
a lock that a driver might try to acquire in its ->remove, in general
we should never attempt to flush a workqueue from within the same
workqueue, and lockdep rightly complains.

So as long as sysfs attributes cannot commit suicide directly and we
are stuck with this callback mechanism, put the sysfs callbacks on
their own workqueue instead of the global one.

This has the side benefit that if a suicidal sysfs attribute kicks
off a long chain of ->remove callbacks, we no longer induce a long
delay on the global queue.

This also fixes a missing module_put in the error path introduced
by sysfs-only-allow-one-scheduled-removal-callback-per-kobj.patch.

We never destroy the workqueue, but I'm not sure that's a
problem.

Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/sysfs/file.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 289c43a4726..979e9379fb5 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -667,6 +667,7 @@ struct sysfs_schedule_callback_struct {
 	struct work_struct	work;
 };
 
+static struct workqueue_struct *sysfs_workqueue;
 static DEFINE_MUTEX(sysfs_workq_mutex);
 static LIST_HEAD(sysfs_workq);
 static void sysfs_schedule_callback_work(struct work_struct *work)
@@ -715,11 +716,20 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
 	mutex_lock(&sysfs_workq_mutex);
 	list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list)
 		if (ss->kobj == kobj) {
+			module_put(owner);
 			mutex_unlock(&sysfs_workq_mutex);
 			return -EAGAIN;
 		}
 	mutex_unlock(&sysfs_workq_mutex);
 
+	if (sysfs_workqueue == NULL) {
+		sysfs_workqueue = create_workqueue("sysfsd");
+		if (sysfs_workqueue == NULL) {
+			module_put(owner);
+			return -ENOMEM;
+		}
+	}
+
 	ss = kmalloc(sizeof(*ss), GFP_KERNEL);
 	if (!ss) {
 		module_put(owner);
@@ -735,7 +745,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
 	mutex_lock(&sysfs_workq_mutex);
 	list_add_tail(&ss->workq_list, &sysfs_workq);
 	mutex_unlock(&sysfs_workq_mutex);
-	schedule_work(&ss->work);
+	queue_work(sysfs_workqueue, &ss->work);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
-- 
GitLab


From 5247aecfe62266ffdedf2fc9e4243638554455b6 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 27 Mar 2009 21:50:00 +0800
Subject: [PATCH 0352/1421] driver core: fix driver_match_device

This patch fixes a bug introduced in commit
49b420a13ff95b449947181190b08367348e3e1b.

If a instance of bus_type doesn't have  .match method,
all .probe of drivers in the bus should be called, or else
the .probe have not a chance to be called.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index ddc97496db4..b528145a078 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -115,7 +115,7 @@ extern int driver_probe_device(struct device_driver *drv, struct device *dev);
 static inline int driver_match_device(struct device_driver *drv,
 				      struct device *dev)
 {
-	return drv->bus->match && drv->bus->match(dev, drv);
+	return drv->bus->match ? drv->bus->match(dev, drv) : 1;
 }
 
 extern void sysdev_shutdown(void);
-- 
GitLab


From d094cbe998eb566d47552aa9d3c26c9123a7b858 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 3 Apr 2009 19:04:15 +0200
Subject: [PATCH 0353/1421] driver core: allow non-root users to listen to
 uevents

Users can read sysfs files, there is no reason they should not be
allowed to listen to uevents.  This lets xorg and other userspace
programs properly get these messages without having to be root.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/kobject_uevent.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index dafeecf5b14..920a3ca6e25 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -328,7 +328,7 @@ static int __init kobject_uevent_init(void)
 		       "kobject_uevent: unable to create netlink socket!\n");
 		return -ENODEV;
 	}
-
+	netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV);
 	return 0;
 }
 
-- 
GitLab


From 1af3557abdef34ee036a6de4cb79e24468544b8d Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Thu, 9 Apr 2009 13:53:22 +0900
Subject: [PATCH 0354/1421] sysfs: sysfs poll keep the poll rule of regular
 file.

Currently, following test programs don't finished.

% ruby -e '
Thread.new { sleep }
File.read("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies")
'

strace expose the reason.

...
open("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY|O_LARGEFILE) = 3
ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf9fa6b8) = -1 ENOTTY (Inappropriate ioctl for device)
fstat64(3, {st_mode=S_IFREG|0444, st_size=4096, ...}) = 0
_llseek(3, 0, [0], SEEK_CUR)            = 0
select(4, [3], NULL, NULL, NULL)        = 1 (in [3])
read(3, "1400000 1300000 1200000 1100000 1"..., 4096) = 62
select(4, [3], NULL, NULL, NULL


Because Ruby (the scripting language) VM assume select system-call
against regular file don't block.  it because SUSv3 says "Regular files
shall always poll TRUE for reading and writing".  see
http://www.opengroup.org/onlinepubs/009695399/functions/poll.html it
seems valid assumption.

But sysfs_poll() don't keep this rule although sysfs file can read and
write always.

This patch restore proper poll behavior to sysfs.
/sys/block/md*/md/sync_action polling application and another sysfs
updating sensitive application still can use POLLERR and POLLPRI.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/sysfs/file.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 979e9379fb5..b1606e07b7a 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -446,11 +446,11 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
 	if (buffer->event != atomic_read(&od->event))
 		goto trigger;
 
-	return 0;
+	return DEFAULT_POLLMASK;
 
  trigger:
 	buffer->needs_read_fill = 1;
-	return POLLERR|POLLPRI;
+	return DEFAULT_POLLMASK|POLLERR|POLLPRI;
 }
 
 void sysfs_notify_dirent(struct sysfs_dirent *sd)
-- 
GitLab


From 31b07093c44a7a442394d44423e21d783f5523b8 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Thu, 9 Apr 2009 13:57:59 +0900
Subject: [PATCH 0355/1421] proc: mounts_poll() make consistent to mdstat_poll

In recently sysfs_poll discussion, Neil Brown pointed out /proc/mounts
also should be fixed.

SUSv3 says "Regular files shall always poll TRUE for reading and
writing".  see
http://www.opengroup.org/onlinepubs/009695399/functions/poll.html

Then, mounts_poll()'s default should be "POLLIN | POLLRDNORM".  it mean
always readable.

In addition, event trigger should use "POLLERR | POLLPRI" instead
POLLERR.  it makes consistent to mdstat_poll() and sysfs_poll(). and,
select(2) can handle POLLPRI easily.


Reported-by: Neil Brown <neilb@suse.de>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/proc/base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index f71559784bf..aa763ab0077 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -648,14 +648,14 @@ static unsigned mounts_poll(struct file *file, poll_table *wait)
 {
 	struct proc_mounts *p = file->private_data;
 	struct mnt_namespace *ns = p->ns;
-	unsigned res = 0;
+	unsigned res = POLLIN | POLLRDNORM;
 
 	poll_wait(file, &ns->poll, wait);
 
 	spin_lock(&vfsmount_lock);
 	if (p->event != ns->event) {
 		p->event = ns->event;
-		res = POLLERR;
+		res |= POLLERR | POLLPRI;
 	}
 	spin_unlock(&vfsmount_lock);
 
-- 
GitLab


From 13977091a988fb0d21821c2221ddc920eba36b79 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 30 Mar 2009 14:37:25 -0700
Subject: [PATCH 0356/1421] Driver Core: early platform driver

V3 of the early platform driver implementation.

Platform drivers are great for embedded platforms because we can separate
driver configuration from the actual driver.  So base addresses,
interrupts and other configuration can be kept with the processor or board
code, and the platform driver can be reused by many different platforms.

For early devices we have nothing today.  For instance, to configure early
timers and early serial ports we cannot use platform devices.  This
because the setup order during boot.  Timers are needed before the
platform driver core code is available.  The same goes for early printk
support.  Early in this case means before initcalls.

These early drivers today have their configuration either hard coded or
they receive it using some special configuration method.  This is working
quite well, but if we want to support both regular kernel modules and
early devices then we need to have two ways of configuring the same
driver.  A single way would be better.

The early platform driver patch is basically a set of functions that allow
drivers to register themselves and architecture code to locate them and
probe.  Registration happens through early_param().  The time for the
probe is decided by the architecture code.

See Documentation/driver-model/platform.txt for more details.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/driver-model/platform.txt |  59 ++++++
 drivers/base/platform.c                 | 239 ++++++++++++++++++++++++
 include/linux/init.h                    |   1 +
 include/linux/platform_device.h         |  42 +++++
 init/main.c                             |   7 +-
 5 files changed, 347 insertions(+), 1 deletion(-)

diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 83009fdcbbc..2e2c2ea90ce 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -169,3 +169,62 @@ three different ways to find such a match:
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d2198f64ad4..b5b6c973a2e 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -990,6 +990,8 @@ int __init platform_bus_init(void)
 {
 	int error;
 
+	early_platform_cleanup();
+
 	error = device_register(&platform_bus);
 	if (error)
 		return error;
@@ -1020,3 +1022,240 @@ u64 dma_get_required_mask(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dma_get_required_mask);
 #endif
+
+static __initdata LIST_HEAD(early_platform_driver_list);
+static __initdata LIST_HEAD(early_platform_device_list);
+
+/**
+ * early_platform_driver_register
+ * @edrv: early_platform driver structure
+ * @buf: string passed from early_param()
+ */
+int __init early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf)
+{
+	unsigned long index;
+	int n;
+
+	/* Simply add the driver to the end of the global list.
+	 * Drivers will by default be put on the list in compiled-in order.
+	 */
+	if (!epdrv->list.next) {
+		INIT_LIST_HEAD(&epdrv->list);
+		list_add_tail(&epdrv->list, &early_platform_driver_list);
+	}
+
+	/* If the user has specified device then make sure the driver
+	 * gets prioritized. The driver of the last device specified on
+	 * command line will be put first on the list.
+	 */
+	n = strlen(epdrv->pdrv->driver.name);
+	if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
+		list_move(&epdrv->list, &early_platform_driver_list);
+
+		if (!strcmp(buf, epdrv->pdrv->driver.name))
+			epdrv->requested_id = -1;
+		else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10,
+							 &index) == 0)
+			epdrv->requested_id = index;
+		else
+			epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
+	}
+
+	return 0;
+}
+
+/**
+ * early_platform_add_devices - add a numbers of early platform devices
+ * @devs: array of early platform devices to add
+ * @num: number of early platform devices in array
+ */
+void __init early_platform_add_devices(struct platform_device **devs, int num)
+{
+	struct device *dev;
+	int i;
+
+	/* simply add the devices to list */
+	for (i = 0; i < num; i++) {
+		dev = &devs[i]->dev;
+
+		if (!dev->devres_head.next) {
+			INIT_LIST_HEAD(&dev->devres_head);
+			list_add_tail(&dev->devres_head,
+				      &early_platform_device_list);
+		}
+	}
+}
+
+/**
+ * early_platform_driver_register_all
+ * @class_str: string to identify early platform driver class
+ */
+void __init early_platform_driver_register_all(char *class_str)
+{
+	/* The "class_str" parameter may or may not be present on the kernel
+	 * command line. If it is present then there may be more than one
+	 * matching parameter.
+	 *
+	 * Since we register our early platform drivers using early_param()
+	 * we need to make sure that they also get registered in the case
+	 * when the parameter is missing from the kernel command line.
+	 *
+	 * We use parse_early_options() to make sure the early_param() gets
+	 * called at least once. The early_param() may be called more than
+	 * once since the name of the preferred device may be specified on
+	 * the kernel command line. early_platform_driver_register() handles
+	 * this case for us.
+	 */
+	parse_early_options(class_str);
+}
+
+/**
+ * early_platform_match
+ * @edrv: early platform driver structure
+ * @id: id to match against
+ */
+static  __init struct platform_device *
+early_platform_match(struct early_platform_driver *epdrv, int id)
+{
+	struct platform_device *pd;
+
+	list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+		if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+			if (pd->id == id)
+				return pd;
+
+	return NULL;
+}
+
+/**
+ * early_platform_left
+ * @edrv: early platform driver structure
+ * @id: return true if id or above exists
+ */
+static  __init int early_platform_left(struct early_platform_driver *epdrv,
+				       int id)
+{
+	struct platform_device *pd;
+
+	list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+		if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+			if (pd->id >= id)
+				return 1;
+
+	return 0;
+}
+
+/**
+ * early_platform_driver_probe_id
+ * @class_str: string to identify early platform driver class
+ * @id: id to match against
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ */
+static int __init early_platform_driver_probe_id(char *class_str,
+						 int id,
+						 int nr_probe)
+{
+	struct early_platform_driver *epdrv;
+	struct platform_device *match;
+	int match_id;
+	int n = 0;
+	int left = 0;
+
+	list_for_each_entry(epdrv, &early_platform_driver_list, list) {
+		/* only use drivers matching our class_str */
+		if (strcmp(class_str, epdrv->class_str))
+			continue;
+
+		if (id == -2) {
+			match_id = epdrv->requested_id;
+			left = 1;
+
+		} else {
+			match_id = id;
+			left += early_platform_left(epdrv, id);
+
+			/* skip requested id */
+			switch (epdrv->requested_id) {
+			case EARLY_PLATFORM_ID_ERROR:
+			case EARLY_PLATFORM_ID_UNSET:
+				break;
+			default:
+				if (epdrv->requested_id == id)
+					match_id = EARLY_PLATFORM_ID_UNSET;
+			}
+		}
+
+		switch (match_id) {
+		case EARLY_PLATFORM_ID_ERROR:
+			pr_warning("%s: unable to parse %s parameter\n",
+				   class_str, epdrv->pdrv->driver.name);
+			/* fall-through */
+		case EARLY_PLATFORM_ID_UNSET:
+			match = NULL;
+			break;
+		default:
+			match = early_platform_match(epdrv, match_id);
+		}
+
+		if (match) {
+			if (epdrv->pdrv->probe(match))
+				pr_warning("%s: unable to probe %s early.\n",
+					   class_str, match->name);
+			else
+				n++;
+		}
+
+		if (n >= nr_probe)
+			break;
+	}
+
+	if (left)
+		return n;
+	else
+		return -ENODEV;
+}
+
+/**
+ * early_platform_driver_probe
+ * @class_str: string to identify early platform driver class
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ * @user_only: only probe user specified early platform devices
+ */
+int __init early_platform_driver_probe(char *class_str,
+				       int nr_probe,
+				       int user_only)
+{
+	int k, n, i;
+
+	n = 0;
+	for (i = -2; n < nr_probe; i++) {
+		k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
+
+		if (k < 0)
+			break;
+
+		n += k;
+
+		if (user_only)
+			break;
+	}
+
+	return n;
+}
+
+/**
+ * early_platform_cleanup - clean up early platform code
+ */
+void __init early_platform_cleanup(void)
+{
+	struct platform_device *pd, *pd2;
+
+	/* clean up the devres list used to chain devices */
+	list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
+				 dev.devres_head) {
+		list_del(&pd->dev.devres_head);
+		memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
+	}
+}
+
diff --git a/include/linux/init.h b/include/linux/init.h
index 68cb0265d00..f121a7a10c3 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -247,6 +247,7 @@ struct obs_kernel_param {
 
 /* Relies on boot_command_line being set */
 void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
 #endif /* __ASSEMBLY__ */
 
 /**
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 76e470a299b..72736fd8223 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver,
 #define platform_get_drvdata(_dev)	dev_get_drvdata(&(_dev)->dev)
 #define platform_set_drvdata(_dev,data)	dev_set_drvdata(&(_dev)->dev, (data))
 
+/* early platform driver interface */
+struct early_platform_driver {
+	const char *class_str;
+	struct platform_driver *pdrv;
+	struct list_head list;
+	int requested_id;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+	return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+				       int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+
+#ifndef MODULE
+#define early_platform_init(class_string, platform_driver)		\
+static __initdata struct early_platform_driver early_driver = {		\
+	.class_str = class_string,					\
+	.pdrv = platform_driver,					\
+	.requested_id = EARLY_PLATFORM_ID_UNSET,			\
+};									\
+static int __init early_platform_driver_setup_func(char *buf)		\
+{									\
+	return early_platform_driver_register(&early_driver, buf);	\
+}									\
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init(class_string, platform_driver)
+#endif /* MODULE */
+
 #endif /* _PLATFORM_DEVICE_H_ */
diff --git a/init/main.c b/init/main.c
index 3585f073d63..3bbf93be744 100644
--- a/init/main.c
+++ b/init/main.c
@@ -492,6 +492,11 @@ static int __init do_early_param(char *param, char *val)
 	return 0;
 }
 
+void __init parse_early_options(char *cmdline)
+{
+	parse_args("early options", cmdline, NULL, 0, do_early_param);
+}
+
 /* Arch code calls this early on, or if not, just before other parsing. */
 void __init parse_early_param(void)
 {
@@ -503,7 +508,7 @@ void __init parse_early_param(void)
 
 	/* All fall through to do_early_param. */
 	strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-	parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+	parse_early_options(tmp_cmdline);
 	done = 1;
 }
 
-- 
GitLab


From 4ccb457966391295bd9b3644f6bdc9ddd97b6051 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Thu, 9 Apr 2009 14:48:24 -0700
Subject: [PATCH 0357/1421] dynamic debug: resurrect old pr_debug() semantics
 as pr_devel()

pr_debug() used to produce zero code unless DEBUG was #defined.  This is
now no longer the case in practice[1].

There are places where it's useful to have debugging printks, but we don't
want them to generate any code in production kernels.

So add a new macro, pr_devel(), for _devel_opment, to provide the old
semantics, ie.  if the programmer doesn't explicitly enable debugging, no
code is produced.

[1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least
     one distro kernel, so it's not really a solution.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Greg Banks <gnb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/kernel.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d9e75ec7def..883cd44ff76 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 #define pr_cont(fmt, ...) \
 	printk(KERN_CONT fmt, ##__VA_ARGS__)
 
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
 /* If you are writing a driver, please use dev_dbg instead */
 #if defined(DEBUG)
 #define pr_debug(fmt, ...) \
-- 
GitLab


From 014c90dbb9b63bae067afc80a7931a76c5268ae3 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 15 Apr 2009 16:00:12 -0700
Subject: [PATCH 0358/1421] driver core: prevent device_for_each_child from
 oopsing

David Vrabel noticed that the wireless usb stack likes to call
device_for_each_chile() with an empty bus.  This used to work fine, but
now oopses.  This patch fixes the oops and makes the code behave like it
used to.

Reported-by: David Vrabel <david.vrabel@csr.com>
Tested-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index e73c92d13a2..d230ff4b3ee 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1142,6 +1142,9 @@ int device_for_each_child(struct device *parent, void *data,
 	struct device *child;
 	int error = 0;
 
+	if (!parent->p)
+		return 0;
+
 	klist_iter_init(&parent->p->klist_children, &i);
 	while ((child = next_device(&i)) && !error)
 		error = fn(child, data);
-- 
GitLab


From 7607b1d673469d5b5dce4c9b6779d165e03c8ff5 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Wed, 8 Apr 2009 12:12:52 -0400
Subject: [PATCH 0359/1421] Driver core: remove pr_fmt() from dynamic_dev_dbg()
 printk

When pr_fmt() was added to the pr_debug() code, we added it not only to the
dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton.
However, dev_dbg() doesn't make use of pr_fmt(), so neither should
dynamic_dev_dbg().

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/dynamic_debug.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index baabf33be24..a0d9422a156 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name);
 		DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT };	\
 	if (__dynamic_dbg_enabled(descriptor))				\
 			dev_printk(KERN_DEBUG, dev,			\
-					KBUILD_MODNAME ": " pr_fmt(fmt),\
+					KBUILD_MODNAME ": " fmt,	\
 					##__VA_ARGS__);			\
 	} while (0)
 
-- 
GitLab


From 912335c43bb10d124471bf063a85e132aa814214 Mon Sep 17 00:00:00 2001
From: "Hans J. Koch" <hjk@linutronix.de>
Date: Sat, 11 Apr 2009 04:18:25 +0200
Subject: [PATCH 0360/1421] UIO: fix specific device driver missing statement
 for depmod

On Fri, Apr 10, 2009 at 01:50:50PM -0700, Andrew Morton wrote:
> On Fri, 10 Apr 2009 13:32:01 GMT
> bugzilla-daemon@bugzilla.kernel.org wrote:
>
> > http://bugzilla.kernel.org/show_bug.cgi?id=13059

drivers/uio/uio_cif.c misses a MODULE_DEVICE_TABLE, this fixes it.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uio/uio_cif.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index c60b8fcf0e3..28034c81291 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -147,5 +147,6 @@ static void __exit hilscher_exit_module(void)
 module_init(hilscher_init_module);
 module_exit(hilscher_exit_module);
 
+MODULE_DEVICE_TABLE(pci, hilscher_pci_ids);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger");
-- 
GitLab


From 79d381c9f2354b594dcab9b04dfcc0debf7294fe Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 16 Apr 2009 19:30:18 -0400
Subject: [PATCH 0361/1421] kernel/softirq.c: fix sparse warning

Fix sparse warning in kernel/softirq.c.

  warning: do-while statement is not a compound statement

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
LKML-Reference: <BD79186B4FD85F4B8E60E381CAEE1909015F9033@mi8nycmail19.Mi8.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/softirq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/softirq.c b/kernel/softirq.c
index 2fecefacdc5..b525dd34851 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -472,9 +472,9 @@ void tasklet_kill(struct tasklet_struct *t)
 		printk("Attempt to kill tasklet from interrupt\n");
 
 	while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
-		do
+		do {
 			yield();
-		while (test_bit(TASKLET_STATE_SCHED, &t->state));
+		} while (test_bit(TASKLET_STATE_SCHED, &t->state));
 	}
 	tasklet_unlock_wait(t);
 	clear_bit(TASKLET_STATE_SCHED, &t->state);
-- 
GitLab


From fe4e719d82c4052751d2287de4bd18bd04e93685 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Fri, 28 Nov 2008 02:46:48 +0900
Subject: [PATCH 0362/1421] m32r: move include/asm-m32r headers to
 arch/m32r/include/asm

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 {include/asm-m32r => arch/m32r/include/asm}/Kbuild                | 0
 {include/asm-m32r => arch/m32r/include/asm}/addrspace.h           | 0
 {include/asm-m32r => arch/m32r/include/asm}/assembler.h           | 0
 {include/asm-m32r => arch/m32r/include/asm}/atomic.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/auxvec.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/bitops.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/bug.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/bugs.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/byteorder.h           | 0
 {include/asm-m32r => arch/m32r/include/asm}/cache.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/cachectl.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/cacheflush.h          | 0
 {include/asm-m32r => arch/m32r/include/asm}/checksum.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/cputime.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/current.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/delay.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/device.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/div64.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/dma.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/elf.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/emergency-restart.h   | 0
 {include/asm-m32r => arch/m32r/include/asm}/errno.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/fb.h                  | 0
 {include/asm-m32r => arch/m32r/include/asm}/fcntl.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/flat.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/futex.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/hardirq.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/hw_irq.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/io.h                  | 0
 {include/asm-m32r => arch/m32r/include/asm}/ioctl.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/ioctls.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/ipcbuf.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/irq.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/irq_regs.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/kdebug.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/kmap_types.h          | 0
 {include/asm-m32r => arch/m32r/include/asm}/linkage.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/local.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/m32102.h              | 0
 .../asm-m32r => arch/m32r/include/asm}/m32104ut/m32104ut_pld.h    | 0
 .../asm-m32r => arch/m32r/include/asm}/m32700ut/m32700ut_lan.h    | 0
 .../asm-m32r => arch/m32r/include/asm}/m32700ut/m32700ut_lcd.h    | 0
 .../asm-m32r => arch/m32r/include/asm}/m32700ut/m32700ut_pld.h    | 0
 {include/asm-m32r => arch/m32r/include/asm}/m32r.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/m32r_mp_fpga.h        | 0
 {include/asm-m32r => arch/m32r/include/asm}/mappi2/mappi2_pld.h   | 0
 {include/asm-m32r => arch/m32r/include/asm}/mappi3/mappi3_pld.h   | 0
 {include/asm-m32r => arch/m32r/include/asm}/mc146818rtc.h         | 0
 {include/asm-m32r => arch/m32r/include/asm}/mman.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/mmu.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/mmu_context.h         | 0
 {include/asm-m32r => arch/m32r/include/asm}/mmzone.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/module.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/msgbuf.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/mutex.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/opsput/opsput_lan.h   | 0
 {include/asm-m32r => arch/m32r/include/asm}/opsput/opsput_lcd.h   | 0
 {include/asm-m32r => arch/m32r/include/asm}/opsput/opsput_pld.h   | 0
 {include/asm-m32r => arch/m32r/include/asm}/page.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/param.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/pci.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/percpu.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/pgalloc.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/pgtable-2level.h      | 0
 {include/asm-m32r => arch/m32r/include/asm}/pgtable.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/poll.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/posix_types.h         | 0
 {include/asm-m32r => arch/m32r/include/asm}/processor.h           | 0
 {include/asm-m32r => arch/m32r/include/asm}/ptrace.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/resource.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/rtc.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/s1d13806.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/scatterlist.h         | 0
 {include/asm-m32r => arch/m32r/include/asm}/sections.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/segment.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/sembuf.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/serial.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/setup.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/shmbuf.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/shmparam.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/sigcontext.h          | 0
 {include/asm-m32r => arch/m32r/include/asm}/siginfo.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/signal.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/smp.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/socket.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/sockios.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/spinlock.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/spinlock_types.h      | 0
 {include/asm-m32r => arch/m32r/include/asm}/stat.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/statfs.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/string.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/syscall.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/system.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/termbits.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/termios.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/thread_info.h         | 0
 {include/asm-m32r => arch/m32r/include/asm}/timex.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/tlb.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/tlbflush.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/topology.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/types.h               | 0
 {include/asm-m32r => arch/m32r/include/asm}/uaccess.h             | 0
 {include/asm-m32r => arch/m32r/include/asm}/ucontext.h            | 0
 {include/asm-m32r => arch/m32r/include/asm}/unaligned.h           | 0
 {include/asm-m32r => arch/m32r/include/asm}/unistd.h              | 0
 {include/asm-m32r => arch/m32r/include/asm}/user.h                | 0
 {include/asm-m32r => arch/m32r/include/asm}/vga.h                 | 0
 {include/asm-m32r => arch/m32r/include/asm}/xor.h                 | 0
 108 files changed, 0 insertions(+), 0 deletions(-)
 rename {include/asm-m32r => arch/m32r/include/asm}/Kbuild (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/addrspace.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/assembler.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/atomic.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/auxvec.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/bitops.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/bug.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/bugs.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/byteorder.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/cache.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/cachectl.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/cacheflush.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/checksum.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/cputime.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/current.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/delay.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/device.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/div64.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/dma.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/elf.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/emergency-restart.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/errno.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/fb.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/fcntl.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/flat.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/futex.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/hardirq.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/hw_irq.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/io.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/ioctl.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/ioctls.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/ipcbuf.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/irq.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/irq_regs.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/kdebug.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/kmap_types.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/linkage.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/local.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32102.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32104ut/m32104ut_pld.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32700ut/m32700ut_lan.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32700ut/m32700ut_lcd.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32700ut/m32700ut_pld.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32r.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/m32r_mp_fpga.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mappi2/mappi2_pld.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mappi3/mappi3_pld.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mc146818rtc.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mman.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mmu.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mmu_context.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mmzone.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/module.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/msgbuf.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/mutex.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/opsput/opsput_lan.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/opsput/opsput_lcd.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/opsput/opsput_pld.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/page.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/param.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/pci.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/percpu.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/pgalloc.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/pgtable-2level.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/pgtable.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/poll.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/posix_types.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/processor.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/ptrace.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/resource.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/rtc.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/s1d13806.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/scatterlist.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/sections.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/segment.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/sembuf.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/serial.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/setup.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/shmbuf.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/shmparam.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/sigcontext.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/siginfo.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/signal.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/smp.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/socket.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/sockios.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/spinlock.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/spinlock_types.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/stat.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/statfs.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/string.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/syscall.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/system.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/termbits.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/termios.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/thread_info.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/timex.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/tlb.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/tlbflush.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/topology.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/types.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/uaccess.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/ucontext.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/unaligned.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/unistd.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/user.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/vga.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/xor.h (100%)

diff --git a/include/asm-m32r/Kbuild b/arch/m32r/include/asm/Kbuild
similarity index 100%
rename from include/asm-m32r/Kbuild
rename to arch/m32r/include/asm/Kbuild
diff --git a/include/asm-m32r/addrspace.h b/arch/m32r/include/asm/addrspace.h
similarity index 100%
rename from include/asm-m32r/addrspace.h
rename to arch/m32r/include/asm/addrspace.h
diff --git a/include/asm-m32r/assembler.h b/arch/m32r/include/asm/assembler.h
similarity index 100%
rename from include/asm-m32r/assembler.h
rename to arch/m32r/include/asm/assembler.h
diff --git a/include/asm-m32r/atomic.h b/arch/m32r/include/asm/atomic.h
similarity index 100%
rename from include/asm-m32r/atomic.h
rename to arch/m32r/include/asm/atomic.h
diff --git a/include/asm-m32r/auxvec.h b/arch/m32r/include/asm/auxvec.h
similarity index 100%
rename from include/asm-m32r/auxvec.h
rename to arch/m32r/include/asm/auxvec.h
diff --git a/include/asm-m32r/bitops.h b/arch/m32r/include/asm/bitops.h
similarity index 100%
rename from include/asm-m32r/bitops.h
rename to arch/m32r/include/asm/bitops.h
diff --git a/include/asm-m32r/bug.h b/arch/m32r/include/asm/bug.h
similarity index 100%
rename from include/asm-m32r/bug.h
rename to arch/m32r/include/asm/bug.h
diff --git a/include/asm-m32r/bugs.h b/arch/m32r/include/asm/bugs.h
similarity index 100%
rename from include/asm-m32r/bugs.h
rename to arch/m32r/include/asm/bugs.h
diff --git a/include/asm-m32r/byteorder.h b/arch/m32r/include/asm/byteorder.h
similarity index 100%
rename from include/asm-m32r/byteorder.h
rename to arch/m32r/include/asm/byteorder.h
diff --git a/include/asm-m32r/cache.h b/arch/m32r/include/asm/cache.h
similarity index 100%
rename from include/asm-m32r/cache.h
rename to arch/m32r/include/asm/cache.h
diff --git a/include/asm-m32r/cachectl.h b/arch/m32r/include/asm/cachectl.h
similarity index 100%
rename from include/asm-m32r/cachectl.h
rename to arch/m32r/include/asm/cachectl.h
diff --git a/include/asm-m32r/cacheflush.h b/arch/m32r/include/asm/cacheflush.h
similarity index 100%
rename from include/asm-m32r/cacheflush.h
rename to arch/m32r/include/asm/cacheflush.h
diff --git a/include/asm-m32r/checksum.h b/arch/m32r/include/asm/checksum.h
similarity index 100%
rename from include/asm-m32r/checksum.h
rename to arch/m32r/include/asm/checksum.h
diff --git a/include/asm-m32r/cputime.h b/arch/m32r/include/asm/cputime.h
similarity index 100%
rename from include/asm-m32r/cputime.h
rename to arch/m32r/include/asm/cputime.h
diff --git a/include/asm-m32r/current.h b/arch/m32r/include/asm/current.h
similarity index 100%
rename from include/asm-m32r/current.h
rename to arch/m32r/include/asm/current.h
diff --git a/include/asm-m32r/delay.h b/arch/m32r/include/asm/delay.h
similarity index 100%
rename from include/asm-m32r/delay.h
rename to arch/m32r/include/asm/delay.h
diff --git a/include/asm-m32r/device.h b/arch/m32r/include/asm/device.h
similarity index 100%
rename from include/asm-m32r/device.h
rename to arch/m32r/include/asm/device.h
diff --git a/include/asm-m32r/div64.h b/arch/m32r/include/asm/div64.h
similarity index 100%
rename from include/asm-m32r/div64.h
rename to arch/m32r/include/asm/div64.h
diff --git a/include/asm-m32r/dma.h b/arch/m32r/include/asm/dma.h
similarity index 100%
rename from include/asm-m32r/dma.h
rename to arch/m32r/include/asm/dma.h
diff --git a/include/asm-m32r/elf.h b/arch/m32r/include/asm/elf.h
similarity index 100%
rename from include/asm-m32r/elf.h
rename to arch/m32r/include/asm/elf.h
diff --git a/include/asm-m32r/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h
similarity index 100%
rename from include/asm-m32r/emergency-restart.h
rename to arch/m32r/include/asm/emergency-restart.h
diff --git a/include/asm-m32r/errno.h b/arch/m32r/include/asm/errno.h
similarity index 100%
rename from include/asm-m32r/errno.h
rename to arch/m32r/include/asm/errno.h
diff --git a/include/asm-m32r/fb.h b/arch/m32r/include/asm/fb.h
similarity index 100%
rename from include/asm-m32r/fb.h
rename to arch/m32r/include/asm/fb.h
diff --git a/include/asm-m32r/fcntl.h b/arch/m32r/include/asm/fcntl.h
similarity index 100%
rename from include/asm-m32r/fcntl.h
rename to arch/m32r/include/asm/fcntl.h
diff --git a/include/asm-m32r/flat.h b/arch/m32r/include/asm/flat.h
similarity index 100%
rename from include/asm-m32r/flat.h
rename to arch/m32r/include/asm/flat.h
diff --git a/include/asm-m32r/futex.h b/arch/m32r/include/asm/futex.h
similarity index 100%
rename from include/asm-m32r/futex.h
rename to arch/m32r/include/asm/futex.h
diff --git a/include/asm-m32r/hardirq.h b/arch/m32r/include/asm/hardirq.h
similarity index 100%
rename from include/asm-m32r/hardirq.h
rename to arch/m32r/include/asm/hardirq.h
diff --git a/include/asm-m32r/hw_irq.h b/arch/m32r/include/asm/hw_irq.h
similarity index 100%
rename from include/asm-m32r/hw_irq.h
rename to arch/m32r/include/asm/hw_irq.h
diff --git a/include/asm-m32r/io.h b/arch/m32r/include/asm/io.h
similarity index 100%
rename from include/asm-m32r/io.h
rename to arch/m32r/include/asm/io.h
diff --git a/include/asm-m32r/ioctl.h b/arch/m32r/include/asm/ioctl.h
similarity index 100%
rename from include/asm-m32r/ioctl.h
rename to arch/m32r/include/asm/ioctl.h
diff --git a/include/asm-m32r/ioctls.h b/arch/m32r/include/asm/ioctls.h
similarity index 100%
rename from include/asm-m32r/ioctls.h
rename to arch/m32r/include/asm/ioctls.h
diff --git a/include/asm-m32r/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-m32r/ipcbuf.h
rename to arch/m32r/include/asm/ipcbuf.h
diff --git a/include/asm-m32r/irq.h b/arch/m32r/include/asm/irq.h
similarity index 100%
rename from include/asm-m32r/irq.h
rename to arch/m32r/include/asm/irq.h
diff --git a/include/asm-m32r/irq_regs.h b/arch/m32r/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-m32r/irq_regs.h
rename to arch/m32r/include/asm/irq_regs.h
diff --git a/include/asm-m32r/kdebug.h b/arch/m32r/include/asm/kdebug.h
similarity index 100%
rename from include/asm-m32r/kdebug.h
rename to arch/m32r/include/asm/kdebug.h
diff --git a/include/asm-m32r/kmap_types.h b/arch/m32r/include/asm/kmap_types.h
similarity index 100%
rename from include/asm-m32r/kmap_types.h
rename to arch/m32r/include/asm/kmap_types.h
diff --git a/include/asm-m32r/linkage.h b/arch/m32r/include/asm/linkage.h
similarity index 100%
rename from include/asm-m32r/linkage.h
rename to arch/m32r/include/asm/linkage.h
diff --git a/include/asm-m32r/local.h b/arch/m32r/include/asm/local.h
similarity index 100%
rename from include/asm-m32r/local.h
rename to arch/m32r/include/asm/local.h
diff --git a/include/asm-m32r/m32102.h b/arch/m32r/include/asm/m32102.h
similarity index 100%
rename from include/asm-m32r/m32102.h
rename to arch/m32r/include/asm/m32102.h
diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
similarity index 100%
rename from include/asm-m32r/m32104ut/m32104ut_pld.h
rename to arch/m32r/include/asm/m32104ut/m32104ut_pld.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_lan.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_lan.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_lcd.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_pld.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_pld.h
diff --git a/include/asm-m32r/m32r.h b/arch/m32r/include/asm/m32r.h
similarity index 100%
rename from include/asm-m32r/m32r.h
rename to arch/m32r/include/asm/m32r.h
diff --git a/include/asm-m32r/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h
similarity index 100%
rename from include/asm-m32r/m32r_mp_fpga.h
rename to arch/m32r/include/asm/m32r_mp_fpga.h
diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h
similarity index 100%
rename from include/asm-m32r/mappi2/mappi2_pld.h
rename to arch/m32r/include/asm/mappi2/mappi2_pld.h
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h
similarity index 100%
rename from include/asm-m32r/mappi3/mappi3_pld.h
rename to arch/m32r/include/asm/mappi3/mappi3_pld.h
diff --git a/include/asm-m32r/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h
similarity index 100%
rename from include/asm-m32r/mc146818rtc.h
rename to arch/m32r/include/asm/mc146818rtc.h
diff --git a/include/asm-m32r/mman.h b/arch/m32r/include/asm/mman.h
similarity index 100%
rename from include/asm-m32r/mman.h
rename to arch/m32r/include/asm/mman.h
diff --git a/include/asm-m32r/mmu.h b/arch/m32r/include/asm/mmu.h
similarity index 100%
rename from include/asm-m32r/mmu.h
rename to arch/m32r/include/asm/mmu.h
diff --git a/include/asm-m32r/mmu_context.h b/arch/m32r/include/asm/mmu_context.h
similarity index 100%
rename from include/asm-m32r/mmu_context.h
rename to arch/m32r/include/asm/mmu_context.h
diff --git a/include/asm-m32r/mmzone.h b/arch/m32r/include/asm/mmzone.h
similarity index 100%
rename from include/asm-m32r/mmzone.h
rename to arch/m32r/include/asm/mmzone.h
diff --git a/include/asm-m32r/module.h b/arch/m32r/include/asm/module.h
similarity index 100%
rename from include/asm-m32r/module.h
rename to arch/m32r/include/asm/module.h
diff --git a/include/asm-m32r/msgbuf.h b/arch/m32r/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-m32r/msgbuf.h
rename to arch/m32r/include/asm/msgbuf.h
diff --git a/include/asm-m32r/mutex.h b/arch/m32r/include/asm/mutex.h
similarity index 100%
rename from include/asm-m32r/mutex.h
rename to arch/m32r/include/asm/mutex.h
diff --git a/include/asm-m32r/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_lan.h
rename to arch/m32r/include/asm/opsput/opsput_lan.h
diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_lcd.h
rename to arch/m32r/include/asm/opsput/opsput_lcd.h
diff --git a/include/asm-m32r/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_pld.h
rename to arch/m32r/include/asm/opsput/opsput_pld.h
diff --git a/include/asm-m32r/page.h b/arch/m32r/include/asm/page.h
similarity index 100%
rename from include/asm-m32r/page.h
rename to arch/m32r/include/asm/page.h
diff --git a/include/asm-m32r/param.h b/arch/m32r/include/asm/param.h
similarity index 100%
rename from include/asm-m32r/param.h
rename to arch/m32r/include/asm/param.h
diff --git a/include/asm-m32r/pci.h b/arch/m32r/include/asm/pci.h
similarity index 100%
rename from include/asm-m32r/pci.h
rename to arch/m32r/include/asm/pci.h
diff --git a/include/asm-m32r/percpu.h b/arch/m32r/include/asm/percpu.h
similarity index 100%
rename from include/asm-m32r/percpu.h
rename to arch/m32r/include/asm/percpu.h
diff --git a/include/asm-m32r/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
similarity index 100%
rename from include/asm-m32r/pgalloc.h
rename to arch/m32r/include/asm/pgalloc.h
diff --git a/include/asm-m32r/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
similarity index 100%
rename from include/asm-m32r/pgtable-2level.h
rename to arch/m32r/include/asm/pgtable-2level.h
diff --git a/include/asm-m32r/pgtable.h b/arch/m32r/include/asm/pgtable.h
similarity index 100%
rename from include/asm-m32r/pgtable.h
rename to arch/m32r/include/asm/pgtable.h
diff --git a/include/asm-m32r/poll.h b/arch/m32r/include/asm/poll.h
similarity index 100%
rename from include/asm-m32r/poll.h
rename to arch/m32r/include/asm/poll.h
diff --git a/include/asm-m32r/posix_types.h b/arch/m32r/include/asm/posix_types.h
similarity index 100%
rename from include/asm-m32r/posix_types.h
rename to arch/m32r/include/asm/posix_types.h
diff --git a/include/asm-m32r/processor.h b/arch/m32r/include/asm/processor.h
similarity index 100%
rename from include/asm-m32r/processor.h
rename to arch/m32r/include/asm/processor.h
diff --git a/include/asm-m32r/ptrace.h b/arch/m32r/include/asm/ptrace.h
similarity index 100%
rename from include/asm-m32r/ptrace.h
rename to arch/m32r/include/asm/ptrace.h
diff --git a/include/asm-m32r/resource.h b/arch/m32r/include/asm/resource.h
similarity index 100%
rename from include/asm-m32r/resource.h
rename to arch/m32r/include/asm/resource.h
diff --git a/include/asm-m32r/rtc.h b/arch/m32r/include/asm/rtc.h
similarity index 100%
rename from include/asm-m32r/rtc.h
rename to arch/m32r/include/asm/rtc.h
diff --git a/include/asm-m32r/s1d13806.h b/arch/m32r/include/asm/s1d13806.h
similarity index 100%
rename from include/asm-m32r/s1d13806.h
rename to arch/m32r/include/asm/s1d13806.h
diff --git a/include/asm-m32r/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
similarity index 100%
rename from include/asm-m32r/scatterlist.h
rename to arch/m32r/include/asm/scatterlist.h
diff --git a/include/asm-m32r/sections.h b/arch/m32r/include/asm/sections.h
similarity index 100%
rename from include/asm-m32r/sections.h
rename to arch/m32r/include/asm/sections.h
diff --git a/include/asm-m32r/segment.h b/arch/m32r/include/asm/segment.h
similarity index 100%
rename from include/asm-m32r/segment.h
rename to arch/m32r/include/asm/segment.h
diff --git a/include/asm-m32r/sembuf.h b/arch/m32r/include/asm/sembuf.h
similarity index 100%
rename from include/asm-m32r/sembuf.h
rename to arch/m32r/include/asm/sembuf.h
diff --git a/include/asm-m32r/serial.h b/arch/m32r/include/asm/serial.h
similarity index 100%
rename from include/asm-m32r/serial.h
rename to arch/m32r/include/asm/serial.h
diff --git a/include/asm-m32r/setup.h b/arch/m32r/include/asm/setup.h
similarity index 100%
rename from include/asm-m32r/setup.h
rename to arch/m32r/include/asm/setup.h
diff --git a/include/asm-m32r/shmbuf.h b/arch/m32r/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-m32r/shmbuf.h
rename to arch/m32r/include/asm/shmbuf.h
diff --git a/include/asm-m32r/shmparam.h b/arch/m32r/include/asm/shmparam.h
similarity index 100%
rename from include/asm-m32r/shmparam.h
rename to arch/m32r/include/asm/shmparam.h
diff --git a/include/asm-m32r/sigcontext.h b/arch/m32r/include/asm/sigcontext.h
similarity index 100%
rename from include/asm-m32r/sigcontext.h
rename to arch/m32r/include/asm/sigcontext.h
diff --git a/include/asm-m32r/siginfo.h b/arch/m32r/include/asm/siginfo.h
similarity index 100%
rename from include/asm-m32r/siginfo.h
rename to arch/m32r/include/asm/siginfo.h
diff --git a/include/asm-m32r/signal.h b/arch/m32r/include/asm/signal.h
similarity index 100%
rename from include/asm-m32r/signal.h
rename to arch/m32r/include/asm/signal.h
diff --git a/include/asm-m32r/smp.h b/arch/m32r/include/asm/smp.h
similarity index 100%
rename from include/asm-m32r/smp.h
rename to arch/m32r/include/asm/smp.h
diff --git a/include/asm-m32r/socket.h b/arch/m32r/include/asm/socket.h
similarity index 100%
rename from include/asm-m32r/socket.h
rename to arch/m32r/include/asm/socket.h
diff --git a/include/asm-m32r/sockios.h b/arch/m32r/include/asm/sockios.h
similarity index 100%
rename from include/asm-m32r/sockios.h
rename to arch/m32r/include/asm/sockios.h
diff --git a/include/asm-m32r/spinlock.h b/arch/m32r/include/asm/spinlock.h
similarity index 100%
rename from include/asm-m32r/spinlock.h
rename to arch/m32r/include/asm/spinlock.h
diff --git a/include/asm-m32r/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h
similarity index 100%
rename from include/asm-m32r/spinlock_types.h
rename to arch/m32r/include/asm/spinlock_types.h
diff --git a/include/asm-m32r/stat.h b/arch/m32r/include/asm/stat.h
similarity index 100%
rename from include/asm-m32r/stat.h
rename to arch/m32r/include/asm/stat.h
diff --git a/include/asm-m32r/statfs.h b/arch/m32r/include/asm/statfs.h
similarity index 100%
rename from include/asm-m32r/statfs.h
rename to arch/m32r/include/asm/statfs.h
diff --git a/include/asm-m32r/string.h b/arch/m32r/include/asm/string.h
similarity index 100%
rename from include/asm-m32r/string.h
rename to arch/m32r/include/asm/string.h
diff --git a/include/asm-m32r/syscall.h b/arch/m32r/include/asm/syscall.h
similarity index 100%
rename from include/asm-m32r/syscall.h
rename to arch/m32r/include/asm/syscall.h
diff --git a/include/asm-m32r/system.h b/arch/m32r/include/asm/system.h
similarity index 100%
rename from include/asm-m32r/system.h
rename to arch/m32r/include/asm/system.h
diff --git a/include/asm-m32r/termbits.h b/arch/m32r/include/asm/termbits.h
similarity index 100%
rename from include/asm-m32r/termbits.h
rename to arch/m32r/include/asm/termbits.h
diff --git a/include/asm-m32r/termios.h b/arch/m32r/include/asm/termios.h
similarity index 100%
rename from include/asm-m32r/termios.h
rename to arch/m32r/include/asm/termios.h
diff --git a/include/asm-m32r/thread_info.h b/arch/m32r/include/asm/thread_info.h
similarity index 100%
rename from include/asm-m32r/thread_info.h
rename to arch/m32r/include/asm/thread_info.h
diff --git a/include/asm-m32r/timex.h b/arch/m32r/include/asm/timex.h
similarity index 100%
rename from include/asm-m32r/timex.h
rename to arch/m32r/include/asm/timex.h
diff --git a/include/asm-m32r/tlb.h b/arch/m32r/include/asm/tlb.h
similarity index 100%
rename from include/asm-m32r/tlb.h
rename to arch/m32r/include/asm/tlb.h
diff --git a/include/asm-m32r/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
similarity index 100%
rename from include/asm-m32r/tlbflush.h
rename to arch/m32r/include/asm/tlbflush.h
diff --git a/include/asm-m32r/topology.h b/arch/m32r/include/asm/topology.h
similarity index 100%
rename from include/asm-m32r/topology.h
rename to arch/m32r/include/asm/topology.h
diff --git a/include/asm-m32r/types.h b/arch/m32r/include/asm/types.h
similarity index 100%
rename from include/asm-m32r/types.h
rename to arch/m32r/include/asm/types.h
diff --git a/include/asm-m32r/uaccess.h b/arch/m32r/include/asm/uaccess.h
similarity index 100%
rename from include/asm-m32r/uaccess.h
rename to arch/m32r/include/asm/uaccess.h
diff --git a/include/asm-m32r/ucontext.h b/arch/m32r/include/asm/ucontext.h
similarity index 100%
rename from include/asm-m32r/ucontext.h
rename to arch/m32r/include/asm/ucontext.h
diff --git a/include/asm-m32r/unaligned.h b/arch/m32r/include/asm/unaligned.h
similarity index 100%
rename from include/asm-m32r/unaligned.h
rename to arch/m32r/include/asm/unaligned.h
diff --git a/include/asm-m32r/unistd.h b/arch/m32r/include/asm/unistd.h
similarity index 100%
rename from include/asm-m32r/unistd.h
rename to arch/m32r/include/asm/unistd.h
diff --git a/include/asm-m32r/user.h b/arch/m32r/include/asm/user.h
similarity index 100%
rename from include/asm-m32r/user.h
rename to arch/m32r/include/asm/user.h
diff --git a/include/asm-m32r/vga.h b/arch/m32r/include/asm/vga.h
similarity index 100%
rename from include/asm-m32r/vga.h
rename to arch/m32r/include/asm/vga.h
diff --git a/include/asm-m32r/xor.h b/arch/m32r/include/asm/xor.h
similarity index 100%
rename from include/asm-m32r/xor.h
rename to arch/m32r/include/asm/xor.h
-- 
GitLab


From c03f6a19699fce4389888a45db8245969311d868 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Fri, 17 Apr 2009 11:06:30 +1000
Subject: [PATCH 0363/1421] md: update sync_completed and reshape_position even
 more often.

There are circumstances when a user-space process might need to
"oversee" a resync/reshape process.  For example when doing an
in-place reshape of a raid5, it is prudent to take a backup of each
section before reshaping it as this is the only way to provide
safety against an unplanned shutdown (i.e. crash/power failure).

The sync_max sysfs value can be used to stop the resync from
advancing beyond a particular point.
So user-space can:
  suspend IO to the first section and back it up
  set 'sync_max' to the end of the section
  wait for 'sync_completed' to reach that point
  resume IO on the first section and move on to the next section.

However this process requires the kernel and user-space to run in
lock-step which could introduce unnecessary delays.

It would be better if a 'double buffered' approach could be used with
userspace and kernel space working on different sections with the
'next' section always ready when the 'current' section is finished.

One problem with implementing this is that sync_completed is only
guaranteed to be updated when the sync process reaches sync_max.
(it is updated on a time basis at other times, but it is hard to rely
on that).  This defeats some of the double buffering.

With this patch, sync_completed (and reshape_position) get updated as
the current position approaches sync_max, so there is room for
userspace to advance sync_max early without losing updates.

To be precise, sync_completed is updated when the current sync
position reaches half way between the current value of sync_completed
and the value of sync_max.  This will usually be a good time for user
space to update sync_max.

If sync_max does not get updated, the updates to sync_completed
(together with associated metadata updates) will occur at an
exponentially increasing frequency which will get unreasonably fast
(one update every page) immediately before the process hits sync_max
and stops.  So the update rate will be unreasonably fast only for an
insignificant period of time.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c    | 3 ++-
 drivers/md/raid5.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 7af64f3846a..612343fdde9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6347,7 +6347,8 @@ void md_do_sync(mddev_t *mddev)
 		if ((mddev->curr_resync > mddev->curr_resync_completed &&
 		     (mddev->curr_resync - mddev->curr_resync_completed)
 		    > (max_sectors >> 4)) ||
-		    j >= mddev->resync_max
+		    (j - mddev->curr_resync_completed)*2
+		    >= mddev->resync_max - mddev->curr_resync_completed
 			) {
 			/* time to update curr_resync_completed */
 			blk_unplug(mddev->queue);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 76892ac7254..4616bc3a6e7 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3940,7 +3940,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
 	 * then we need to write out the superblock.
 	 */
 	sector_nr += reshape_sectors;
-	if (sector_nr >= mddev->resync_max) {
+	if ((sector_nr - mddev->curr_resync_completed) * 2
+	    >= mddev->resync_max - mddev->curr_resync_completed) {
 		/* Cannot proceed until we've updated the superblock... */
 		wait_event(conf->wait_for_overlap,
 			   atomic_read(&conf->reshape_stripes) == 0);
-- 
GitLab


From ca713c2ab0eea3458962983e4a7e13430ea479b8 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 15 Apr 2009 18:39:13 -0700
Subject: [PATCH 0364/1421] x86/irq: mark NUMA_MIGRATE_IRQ_DESC broken

It causes crash on system with lots of cards with MSI-X
when irq_balancer enabled...

The patches fixing it were both complex and fragile, according
to Eric they were also doing quite dangerous things to the
hardware.

Instead we now have patches that solve this problem via static
NUMA node mappings - not dynamic allocation and balancing.

The patches are much simpler than this method but are still too
large outside of the merge window, so we mark the dynamic balancer
as broken for now, and queue up the new approach for v2.6.31.

[ Impact: deactivate broken kernel feature ]

Reported-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49E68C41.4020801@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bc25b9f5e4c..b1d2be7d91a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -277,6 +277,7 @@ config SPARSE_IRQ
 config NUMA_MIGRATE_IRQ_DESC
 	bool "Move irq desc when changing irq smp_affinity"
 	depends on SPARSE_IRQ && NUMA
+	depends on BROKEN
 	default n
 	---help---
 	  This enables moving irq_desc to cpu/node that irq will use handled.
-- 
GitLab


From 0f4d634c59a4e062bef81c00d9e63333f2a83b46 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 26 Mar 2009 13:35:37 -0400
Subject: [PATCH 0365/1421] cifs: flush data on any setattr

We already flush all the dirty pages for an inode before doing
ATTR_SIZE and ATTR_MTIME changes. There's another problem though -- if
we change the mode so that the file becomes read-only then we may not
be able to write data to it after a reconnect.

Fix this by just going back to flushing all the dirty data on any
setattr call. There are probably some cases that can be optimized out,
but I'm not sure they're worthwhile and we need to consider them more
carefully to make sure that we don't cause regressions if we have
to reconnect before writeback occurs.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 58 +++++++++++++++++++++++++------------------------
 1 file changed, 30 insertions(+), 28 deletions(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f121a80fdd6..89063f1eb55 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1792,20 +1792,21 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
 		goto out;
 	}
 
-	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
-		/*
-		   Flush data before changing file size or changing the last
-		   write time of the file on the server. If the
-		   flush returns error, store it to report later and continue.
-		   BB: This should be smarter. Why bother flushing pages that
-		   will be truncated anyway? Also, should we error out here if
-		   the flush returns error?
-		 */
-		rc = filemap_write_and_wait(inode->i_mapping);
-		if (rc != 0) {
-			cifsInode->write_behind_rc = rc;
-			rc = 0;
-		}
+	/*
+	 * Attempt to flush data before changing attributes. We need to do
+	 * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+	 * ownership or mode then we may also need to do this. Here, we take
+	 * the safe way out and just do the flush on all setattr requests. If
+	 * the flush returns error, store it to report later and continue.
+	 *
+	 * BB: This should be smarter. Why bother flushing pages that
+	 * will be truncated anyway? Also, should we error out here if
+	 * the flush returns error?
+	 */
+	rc = filemap_write_and_wait(inode->i_mapping);
+	if (rc != 0) {
+		cifsInode->write_behind_rc = rc;
+		rc = 0;
 	}
 
 	if (attrs->ia_valid & ATTR_SIZE) {
@@ -1903,20 +1904,21 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 		return -ENOMEM;
 	}
 
-	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
-		/*
-		   Flush data before changing file size or changing the last
-		   write time of the file on the server. If the
-		   flush returns error, store it to report later and continue.
-		   BB: This should be smarter. Why bother flushing pages that
-		   will be truncated anyway? Also, should we error out here if
-		   the flush returns error?
-		 */
-		rc = filemap_write_and_wait(inode->i_mapping);
-		if (rc != 0) {
-			cifsInode->write_behind_rc = rc;
-			rc = 0;
-		}
+	/*
+	 * Attempt to flush data before changing attributes. We need to do
+	 * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+	 * ownership or mode then we may also need to do this. Here, we take
+	 * the safe way out and just do the flush on all setattr requests. If
+	 * the flush returns error, store it to report later and continue.
+	 *
+	 * BB: This should be smarter. Why bother flushing pages that
+	 * will be truncated anyway? Also, should we error out here if
+	 * the flush returns error?
+	 */
+	rc = filemap_write_and_wait(inode->i_mapping);
+	if (rc != 0) {
+		cifsInode->write_behind_rc = rc;
+		rc = 0;
 	}
 
 	if (attrs->ia_valid & ATTR_SIZE) {
-- 
GitLab


From 74496d365ad171d11f21da4a8be71c945f6ec825 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yjwei@cn.fujitsu.com>
Date: Tue, 31 Mar 2009 16:28:36 +0800
Subject: [PATCH 0366/1421] cifs: remove some pointless conditionals before
 kfree()

Remove some pointless conditionals before kfree().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 0de3b5615a2..b173b017171 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2673,8 +2673,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
-				if (ses->serverOS)
-					kfree(ses->serverOS);
+				kfree(ses->serverOS);
 				ses->serverOS = kzalloc(2 * (len + 1),
 							GFP_KERNEL);
 				if (ses->serverOS == NULL)
@@ -2710,8 +2709,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
 				/* last string is not always null terminated
 				   (for e.g. for Windows XP & 2000) */
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain =
 						    kzalloc(2*(len+1),
 							    GFP_KERNEL);
@@ -2725,8 +2723,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						ses->serverDomain[1+(2*len)] = 0;
 					} else { /* else no more room so create
 						  dummy domain string */
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain =
 							kzalloc(2, GFP_KERNEL);
 					}
@@ -2772,8 +2769,7 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					bcc_ptr++;
 
 					len = strnlen(bcc_ptr, 1024);
-					if (ses->serverDomain)
-						kfree(ses->serverDomain);
+					kfree(ses->serverDomain);
 					ses->serverDomain = kzalloc(len + 1,
 								    GFP_KERNEL);
 					if (ses->serverDomain == NULL)
@@ -3013,8 +3009,7 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
-					if (ses->serverOS)
-						kfree(ses->serverOS);
+					kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -3086,8 +3081,7 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 					if (((long) bcc_ptr + len) - (long)
 					    pByteArea(smb_buffer_response)
 					    <= BCC(smb_buffer_response)) {
-						if (ses->serverOS)
-							kfree(ses->serverOS);
+						kfree(ses->serverOS);
 						ses->serverOS =
 						    kzalloc(len + 1,
 							    GFP_KERNEL);
@@ -3414,8 +3408,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 /* We look for obvious messed up bcc or strings in response so we do not go off
   the end since (at least) WIN2K and Windows XP have a major bug in not null
   terminating last Unicode string in response  */
-					if (ses->serverOS)
-						kfree(ses->serverOS);
+					kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -3448,8 +3441,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						if (remaining_words > 0) {
 							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
      /* last string not always null terminated (e.g. for Windows XP & 2000) */
-							if (ses->serverDomain)
-								kfree(ses->serverDomain);
+							kfree(ses->serverDomain);
 							ses->serverDomain =
 							    kzalloc(2 *
 								    (len +
@@ -3476,13 +3468,11 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 							    = 0;
 						} /* else no more room so create dummy domain string */
 						else {
-							if (ses->serverDomain)
-								kfree(ses->serverDomain);
+							kfree(ses->serverDomain);
 							ses->serverDomain = kzalloc(2,GFP_KERNEL);
 						}
 					} else {  /* no room so create dummy domain and NOS string */
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain = kzalloc(2, GFP_KERNEL);
 						kfree(ses->serverNOS);
 						ses->serverNOS = kzalloc(2, GFP_KERNEL);
@@ -3492,8 +3482,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					if (((long) bcc_ptr + len) -
 					   (long) pByteArea(smb_buffer_response)
 						<= BCC(smb_buffer_response)) {
-						if (ses->serverOS)
-							kfree(ses->serverOS);
+						kfree(ses->serverOS);
 						ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
 						strncpy(ses->serverOS,bcc_ptr, len);
 
@@ -3512,8 +3501,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain =
 								kzalloc(len+1,
 								    GFP_KERNEL);
-- 
GitLab


From 85a6dac54a7e28112488b02523202985edc7e639 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 1 Apr 2009 05:22:00 +0000
Subject: [PATCH 0367/1421] [CIFS] Endian convert UniqueId when reporting inode
 numbers from server files

Jeff made a good point that we should endian convert the UniqueId when we use
it to set i_ino Even though this value is opaque to the client, when comparing
the inode numbers of the same server file from two different clients (one
big endian, one little endian) or when we compare a big endian client's view
of i_ino with what the server thinks - we should get the same value

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES   | 3 ++-
 fs/cifs/cifspdu.h | 8 ++++----
 fs/cifs/cifssmb.c | 2 +-
 fs/cifs/dir.c     | 6 ++++--
 fs/cifs/inode.c   | 8 +++++---
 fs/cifs/readdir.c | 4 ++--
 6 files changed, 18 insertions(+), 13 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 65984006192..9d1fb6ec8a5 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -15,7 +15,8 @@ Posix file open support added (turned off after one attempt if server
 fails to support it properly, as with Samba server versions prior to 3.3.2)
 Fix "redzone overwritten" bug in cifs_put_tcon (CIFSTcon may allocate too
 little memory for the "nativeFileSystem" field returned by the server
-during mount). 
+during mount).  Endian convert inode numbers if necessary (makes it easier
+to compare inode numbers on network files from big endian systems). 
 
 Version 1.56
 ------------
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index b370489c8da..a785f69dbc9 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2163,7 +2163,7 @@ typedef struct {
 	__le32 Type;
 	__le64 DevMajor;
 	__le64 DevMinor;
-	__u64 UniqueId;
+	__le64 UniqueId;
 	__le64 Permissions;
 	__le64 Nlinks;
 } __attribute__((packed)) FILE_UNIX_BASIC_INFO;	/* level 0x200 QPathInfo */
@@ -2308,7 +2308,7 @@ struct unlink_psx_rq { /* level 0x20a SetPathInfo */
 } __attribute__((packed));
 
 struct file_internal_info {
-	__u64  UniqueId; /* inode number */
+	__le64  UniqueId; /* inode number */
 } __attribute__((packed));      /* level 0x3ee */
 
 struct file_mode_info {
@@ -2338,7 +2338,7 @@ typedef struct {
 	__le32 Type;
 	__le64 DevMajor;
 	__le64 DevMinor;
-	__u64 UniqueId;
+	__le64 UniqueId;
 	__le64 Permissions;
 	__le64 Nlinks;
 	char FileName[1];
@@ -2386,7 +2386,7 @@ typedef struct {
 	__le32 FileNameLength;
 	__le32 EaSize; /* EA size */
 	__le32 Reserved;
-	__u64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
+	__le64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
 	char FileName[1];
 } __attribute__((packed)) SEARCH_ID_FULL_DIR_INFO; /* level 0x105 FF rsp data */
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index bc09c998631..3f36b1ea03c 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3918,7 +3918,7 @@ GetInodeNumberRetry:
 			}
 			pfinfo = (struct file_internal_info *)
 				(data_offset + (char *) &pSMBr->hdr.Protocol);
-			*inode_number = pfinfo->UniqueId;
+			*inode_number = le64_to_cpu(pfinfo->UniqueId);
 		}
 	}
 GetInodeNumOut:
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 54dce78fbb7..e457e143434 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -187,8 +187,10 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 	if (!pinode)
 		goto posix_open_ret; /* caller does not need info */
 
-	if (*pinode == NULL)
-		*pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+	if (*pinode == NULL) {
+		__u64 unique_id = le64_to_cpu(presp_data->UniqueId);
+		*pinode = cifs_new_inode(sb, &unique_id);
+	}
 	/* else an inode was passed in. Update its info, don't create one */
 
 	/* We do not need to close the file if new_inode fails since
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 89063f1eb55..fceebee39f2 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -276,7 +276,8 @@ int cifs_get_inode_info_unix(struct inode **pinode,
 
 	/* get new inode */
 	if (*pinode == NULL) {
-		*pinode = cifs_new_inode(sb, &find_data.UniqueId);
+		__u64 unique_id = le64_to_cpu(find_data.UniqueId);
+		*pinode = cifs_new_inode(sb, &unique_id);
 		if (*pinode == NULL) {
 			rc = -ENOMEM;
 			goto cgiiu_exit;
@@ -1138,6 +1139,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 			cFYI(1, ("posix mkdir returned 0x%x", rc));
 			d_drop(direntry);
 		} else {
+			__u64 unique_id;
 			if (pInfo->Type == cpu_to_le32(-1)) {
 				/* no return info, go query for it */
 				kfree(pInfo);
@@ -1151,8 +1153,8 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 			else
 				direntry->d_op = &cifs_dentry_ops;
 
-			newinode = cifs_new_inode(inode->i_sb,
-						  &pInfo->UniqueId);
+			unique_id = le64_to_cpu(pInfo->UniqueId);
+			newinode = cifs_new_inode(inode->i_sb, &unique_id);
 			if (newinode == NULL) {
 				kfree(pInfo);
 				goto mkdir_get_info;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index c2c01ff4c32..c3c3e6286af 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -840,7 +840,7 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 			len = strnlen(filename, PATH_MAX);
 		}
 
-		*pinum = pFindData->UniqueId;
+		*pinum = le64_to_cpu(pFindData->UniqueId);
 	} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
 		FILE_DIRECTORY_INFO *pFindData =
 			(FILE_DIRECTORY_INFO *)current_entry;
@@ -856,7 +856,7 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 			(SEARCH_ID_FULL_DIR_INFO *)current_entry;
 		filename = &pFindData->FileName[0];
 		len = le32_to_cpu(pFindData->FileNameLength);
-		*pinum = pFindData->UniqueId;
+		*pinum = le64_to_cpu(pFindData->UniqueId);
 	} else if (level == SMB_FIND_FILE_BOTH_DIRECTORY_INFO) {
 		FILE_BOTH_DIRECTORY_INFO *pFindData =
 			(FILE_BOTH_DIRECTORY_INFO *)current_entry;
-- 
GitLab


From 1bfe73c258addc388b90fe8c2c6bbc0f0c9c10dd Mon Sep 17 00:00:00 2001
From: Igor Mammedov <niallain@gmail.com>
Date: Wed, 1 Apr 2009 17:54:42 +0400
Subject: [PATCH 0368/1421] Remote DFS root support.

Allows to mount share on a server that returns -EREMOTE
 at the tree connect stage or at the check on a full path
 accessibility.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 152 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 120 insertions(+), 32 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index b173b017171..2e7a4ea26ab 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2214,9 +2214,56 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon,
 	return rc;
 }
 
+static void
+cleanup_volume_info(struct smb_vol **pvolume_info)
+{
+	struct smb_vol *volume_info;
+
+	if (!pvolume_info && !*pvolume_info)
+		return;
+
+	volume_info = *pvolume_info;
+	kzfree(volume_info->password);
+	kfree(volume_info->UNC);
+	kfree(volume_info->prepath);
+	kfree(volume_info);
+	*pvolume_info = NULL;
+	return;
+}
+
+/* build_path_to_root returns full path to root when
+ * we do not have an exiting connection (tcon) */
+static char *
+build_unc_path_to_root(const struct smb_vol *volume_info,
+		const struct cifs_sb_info *cifs_sb)
+{
+	char *full_path;
+
+	int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1);
+	full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL);
+	if (full_path == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	strncpy(full_path, volume_info->UNC, unc_len);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+		int i;
+		for (i = 0; i < unc_len; i++) {
+			if (full_path[i] == '\\')
+				full_path[i] = '/';
+		}
+	}
+
+	if (cifs_sb->prepathlen)
+		strncpy(full_path + unc_len, cifs_sb->prepath,
+				cifs_sb->prepathlen);
+
+	full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
+	return full_path;
+}
+
 int
 cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
-	   char *mount_data, const char *devname)
+		char *mount_data_global, const char *devname)
 {
 	int rc = 0;
 	int xid;
@@ -2225,6 +2272,13 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 	struct cifsTconInfo *tcon = NULL;
 	struct TCP_Server_Info *srvTcp = NULL;
 	char   *full_path;
+	struct dfs_info3_param *referrals = NULL;
+	unsigned int num_referrals = 0;
+
+	char *mount_data = mount_data_global;
+
+try_mount_again:
+	full_path = NULL;
 
 	xid = GetXid();
 
@@ -2371,11 +2425,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 				}
 			}
 
-			/* check for null share name ie connect to dfs root */
 			if ((strchr(volume_info->UNC + 3, '\\') == NULL)
 			    && (strchr(volume_info->UNC + 3, '/') == NULL)) {
-				/* rc = connect_to_dfs_path(...) */
-				cFYI(1, ("DFS root not supported"));
+				cERROR(1, ("Missing share name"));
 				rc = -ENODEV;
 				goto mount_fail_check;
 			} else {
@@ -2392,7 +2444,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 				}
 			}
 			if (rc)
-				goto mount_fail_check;
+				goto remote_path_check;
 			tcon->seal = volume_info->seal;
 			write_lock(&cifs_tcp_ses_lock);
 			list_add(&tcon->tcon_list, &pSesInfo->tcon_list);
@@ -2417,19 +2469,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 	/* BB FIXME fix time_gran to be larger for LANMAN sessions */
 	sb->s_time_gran = 100;
 
-mount_fail_check:
-	/* on error free sesinfo and tcon struct if needed */
-	if (rc) {
-		/* If find_unc succeeded then rc == 0 so we can not end */
-		/* up accidently freeing someone elses tcon struct */
-		if (tcon)
-			cifs_put_tcon(tcon);
-		else if (pSesInfo)
-			cifs_put_smb_ses(pSesInfo);
-		else
-			cifs_put_tcp_session(srvTcp);
-		goto out;
-	}
+	if (rc)
+		goto remote_path_check;
+
 	cifs_sb->tcon = tcon;
 
 	/* do not care if following two calls succeed - informational */
@@ -2461,7 +2503,9 @@ mount_fail_check:
 		cifs_sb->rsize = min(cifs_sb->rsize,
 			       (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
 
-	if (!rc && cifs_sb->prepathlen) {
+remote_path_check:
+	/* check if a whole path (including prepath) is not remote */
+	if (!rc && cifs_sb->prepathlen && tcon) {
 		/* build_path_to_root works only when we have a valid tcon */
 		full_path = cifs_build_path_to_root(cifs_sb);
 		if (full_path == NULL) {
@@ -2469,31 +2513,75 @@ mount_fail_check:
 			goto mount_fail_check;
 		}
 		rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
-		if (rc) {
-			cERROR(1, ("Path %s in not accessible: %d",
-						full_path, rc));
+		if (rc != -EREMOTE) {
 			kfree(full_path);
 			goto mount_fail_check;
 		}
 		kfree(full_path);
 	}
 
+	/* get referral if needed */
+	if (rc == -EREMOTE) {
+		/* convert forward to back slashes in prepath here if needed */
+		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+			convert_delimiter(cifs_sb->prepath,
+					CIFS_DIR_SEP(cifs_sb));
+		full_path = build_unc_path_to_root(volume_info, cifs_sb);
+		if (IS_ERR(full_path)) {
+			rc = PTR_ERR(full_path);
+			goto mount_fail_check;
+		}
+
+		cFYI(1, ("Getting referral for: %s", full_path));
+		rc = get_dfs_path(xid, pSesInfo , full_path + 1,
+			cifs_sb->local_nls, &num_referrals, &referrals,
+			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+		if (!rc && num_referrals > 0) {
+			char *fake_devname = NULL;
+
+			if (mount_data != mount_data_global)
+				kfree(mount_data);
+			mount_data = cifs_compose_mount_options(
+					cifs_sb->mountdata, full_path + 1,
+					referrals, &fake_devname);
+			kfree(fake_devname);
+			free_dfs_info_array(referrals, num_referrals);
+
+			if (tcon)
+				cifs_put_tcon(tcon);
+			else if (pSesInfo)
+				cifs_put_smb_ses(pSesInfo);
+
+			cleanup_volume_info(&volume_info);
+			FreeXid(xid);
+			kfree(full_path);
+			goto try_mount_again;
+		}
+	}
+
+mount_fail_check:
+	/* on error free sesinfo and tcon struct if needed */
+	if (rc) {
+		if (mount_data != mount_data_global)
+			kfree(mount_data);
+		/* If find_unc succeeded then rc == 0 so we can not end */
+		/* up accidently freeing someone elses tcon struct */
+		if (tcon)
+			cifs_put_tcon(tcon);
+		else if (pSesInfo)
+			cifs_put_smb_ses(pSesInfo);
+		else
+			cifs_put_tcp_session(srvTcp);
+		goto out;
+	}
+
 	/* volume_info->password is freed above when existing session found
 	(in which case it is not needed anymore) but when new sesion is created
 	the password ptr is put in the new session structure (in which case the
 	password will be freed at unmount time) */
 out:
 	/* zero out password before freeing */
-	if (volume_info) {
-		if (volume_info->password != NULL) {
-			memset(volume_info->password, 0,
-				strlen(volume_info->password));
-			kfree(volume_info->password);
-		}
-		kfree(volume_info->UNC);
-		kfree(volume_info->prepath);
-		kfree(volume_info);
-	}
+	cleanup_volume_info(&volume_info);
 	FreeXid(xid);
 	return rc;
 }
-- 
GitLab


From d036f50fc202e1a851a25dc5edc215ebd0086201 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 3 Apr 2009 03:12:08 +0000
Subject: [PATCH 0369/1421] [CIFS] Fix build break from recent DFS patch when
 DFS support not enabled

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2e7a4ea26ab..6926023af87 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2522,6 +2522,7 @@ remote_path_check:
 
 	/* get referral if needed */
 	if (rc == -EREMOTE) {
+#ifdef CONFIG_CIFS_DFS_UPCALL
 		/* convert forward to back slashes in prepath here if needed */
 		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
 			convert_delimiter(cifs_sb->prepath,
@@ -2557,6 +2558,9 @@ remote_path_check:
 			kfree(full_path);
 			goto try_mount_again;
 		}
+#else /* No DFS support, return error on mount */
+		rc = -EOPNOTSUPP;
+#endif
 	}
 
 mount_fail_check:
-- 
GitLab


From fbec9ab952d4810960e620035c8e95f0fbbae4be Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 3 Apr 2009 13:44:00 -0400
Subject: [PATCH 0370/1421] cifs: vary timeout on writes past EOF based on
 offset (try #5)

This is the fourth version of this patch:

The first three generated a compiler warning asking for explicit curly
braces.

The first two didn't handle update the size correctly when writes that
didn't start at the eof were done.

The first patch also didn't update the size correctly when it explicitly
set via truncate().

This patch adds code to track the client's current understanding of the
size of the file on the server separate from the i_size, and then to use
this info to semi-intelligently set the timeout for writes past the EOF.

This helps prevent timeouts when trying to write large, sparse files on
windows servers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsfs.c   |  1 +
 fs/cifs/cifsglob.h |  1 +
 fs/cifs/cifssmb.c  |  4 +--
 fs/cifs/file.c     | 64 ++++++++++++++++++++++++++++++++++++----------
 fs/cifs/inode.c    |  8 +++---
 fs/cifs/readdir.c  |  2 ++
 6 files changed, 61 insertions(+), 19 deletions(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 38491fd3871..34f5701d955 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -316,6 +316,7 @@ cifs_alloc_inode(struct super_block *sb)
 	cifs_inode->clientCanCacheAll = false;
 	cifs_inode->delete_pending = false;
 	cifs_inode->vfs_inode.i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
+	cifs_inode->server_eof = 0;
 
 	/* Can not set i_flags here - they get immediately overwritten
 	   to zero by the VFS */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 9fbf4dff5da..7ae19868fdc 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -370,6 +370,7 @@ struct cifsInodeInfo {
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
 	bool oplockPending:1;
 	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
+	u64  server_eof;		/* current file size on server */
 	struct inode vfs_inode;
 };
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 3f36b1ea03c..a0845dc7b8a 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1626,6 +1626,8 @@ CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon,
 	int smb_hdr_len;
 	int resp_buf_type = 0;
 
+	*nbytes = 0;
+
 	cFYI(1, ("write2 at %lld %d bytes", (long long)offset, count));
 
 	if (tcon->ses->capabilities & CAP_LARGE_FILES) {
@@ -1682,11 +1684,9 @@ CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon,
 	cifs_stats_inc(&tcon->num_writes);
 	if (rc) {
 		cFYI(1, ("Send error Write2 = %d", rc));
-		*nbytes = 0;
 	} else if (resp_buf_type == 0) {
 		/* presumably this can not happen, but best to be safe */
 		rc = -EIO;
-		*nbytes = 0;
 	} else {
 		WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base;
 		*nbytes = le16_to_cpu(pSMBr->CountHigh);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 81747acca4c..dfd3e6c52a1 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -971,6 +971,40 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 	return rc;
 }
 
+/*
+ * Set the timeout on write requests past EOF. For some servers (Windows)
+ * these calls can be very long.
+ *
+ * If we're writing >10M past the EOF we give a 180s timeout. Anything less
+ * than that gets a 45s timeout. Writes not past EOF get 15s timeouts.
+ * The 10M cutoff is totally arbitrary. A better scheme for this would be
+ * welcome if someone wants to suggest one.
+ *
+ * We may be able to do a better job with this if there were some way to
+ * declare that a file should be sparse.
+ */
+static int
+cifs_write_timeout(struct cifsInodeInfo *cifsi, loff_t offset)
+{
+	if (offset <= cifsi->server_eof)
+		return CIFS_STD_OP;
+	else if (offset > (cifsi->server_eof + (10 * 1024 * 1024)))
+		return CIFS_VLONG_OP;
+	else
+		return CIFS_LONG_OP;
+}
+
+/* update the file size (if needed) after a write */
+static void
+cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
+		      unsigned int bytes_written)
+{
+	loff_t end_of_write = offset + bytes_written;
+
+	if (end_of_write > cifsi->server_eof)
+		cifsi->server_eof = end_of_write;
+}
+
 ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 	size_t write_size, loff_t *poffset)
 {
@@ -981,6 +1015,7 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 	struct cifsTconInfo *pTcon;
 	int xid, long_op;
 	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
 
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 
@@ -1000,11 +1035,7 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 
 	xid = GetXid();
 
-	if (*poffset > file->f_path.dentry->d_inode->i_size)
-		long_op = CIFS_VLONG_OP; /* writes past EOF take long time */
-	else
-		long_op = CIFS_LONG_OP;
-
+	long_op = cifs_write_timeout(cifsi, *poffset);
 	for (total_written = 0; write_size > total_written;
 	     total_written += bytes_written) {
 		rc = -EAGAIN;
@@ -1048,8 +1079,10 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 				FreeXid(xid);
 				return rc;
 			}
-		} else
+		} else {
+			cifs_update_eof(cifsi, *poffset, bytes_written);
 			*poffset += bytes_written;
+		}
 		long_op = CIFS_STD_OP; /* subsequent writes fast -
 				    15 seconds is plenty */
 	}
@@ -1085,6 +1118,7 @@ static ssize_t cifs_write(struct file *file, const char *write_data,
 	struct cifsTconInfo *pTcon;
 	int xid, long_op;
 	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
 
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 
@@ -1099,11 +1133,7 @@ static ssize_t cifs_write(struct file *file, const char *write_data,
 
 	xid = GetXid();
 
-	if (*poffset > file->f_path.dentry->d_inode->i_size)
-		long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */
-	else
-		long_op = CIFS_LONG_OP;
-
+	long_op = cifs_write_timeout(cifsi, *poffset);
 	for (total_written = 0; write_size > total_written;
 	     total_written += bytes_written) {
 		rc = -EAGAIN;
@@ -1166,8 +1196,10 @@ static ssize_t cifs_write(struct file *file, const char *write_data,
 				FreeXid(xid);
 				return rc;
 			}
-		} else
+		} else {
+			cifs_update_eof(cifsi, *poffset, bytes_written);
 			*poffset += bytes_written;
+		}
 		long_op = CIFS_STD_OP; /* subsequent writes fast -
 				    15 seconds is plenty */
 	}
@@ -1380,11 +1412,12 @@ static int cifs_writepages(struct address_space *mapping,
 	int nr_pages;
 	__u64 offset = 0;
 	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsi = CIFS_I(mapping->host);
 	struct page *page;
 	struct pagevec pvec;
 	int rc = 0;
 	int scanned = 0;
-	int xid;
+	int xid, long_op;
 
 	cifs_sb = CIFS_SB(mapping->host->i_sb);
 
@@ -1528,12 +1561,15 @@ retry:
 				cERROR(1, ("No writable handles for inode"));
 				rc = -EBADF;
 			} else {
+				long_op = cifs_write_timeout(cifsi, offset);
 				rc = CIFSSMBWrite2(xid, cifs_sb->tcon,
 						   open_file->netfid,
 						   bytes_to_write, offset,
 						   &bytes_written, iov, n_iov,
-						   CIFS_LONG_OP);
+						   long_op);
 				atomic_dec(&open_file->wrtPending);
+				cifs_update_eof(cifsi, offset, bytes_written);
+
 				if (rc || bytes_written < bytes_to_write) {
 					cERROR(1, ("Write2 ret %d, wrote %d",
 						  rc, bytes_written));
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fceebee39f2..09082ac8518 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -143,6 +143,7 @@ static void cifs_unix_info_to_inode(struct inode *inode,
 
 	inode->i_nlink = le64_to_cpu(info->Nlinks);
 
+	cifsInfo->server_eof = end_of_file;
 	spin_lock(&inode->i_lock);
 	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
 		/*
@@ -606,12 +607,12 @@ int cifs_get_inode_info(struct inode **pinode,
 			inode->i_mode |= S_IFREG;
 	}
 
+	cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
 	spin_lock(&inode->i_lock);
-	if (is_size_safe_to_change(cifsInfo,
-				   le64_to_cpu(pfindData->EndOfFile))) {
+	if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
 		/* can not safely shrink the file size here if the
 		   client is writing to it due to potential races */
-		i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+		i_size_write(inode, cifsInfo->server_eof);
 
 		/* 512 bytes (2**9) is the fake blocksize that must be
 		   used for this calculation */
@@ -1755,6 +1756,7 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs,
 	}
 
 	if (rc == 0) {
+		cifsInode->server_eof = attrs->ia_size;
 		rc = cifs_vmtruncate(inode, attrs->ia_size);
 		cifs_truncate_page(inode->i_mapping, inode->i_size);
 	}
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index c3c3e6286af..1a8be622833 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -239,6 +239,7 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type,
 	if (atomic_read(&cifsInfo->inUse) == 0)
 		atomic_set(&cifsInfo->inUse, 1);
 
+	cifsInfo->server_eof = end_of_file;
 	spin_lock(&tmp_inode->i_lock);
 	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
 		/* can not safely change the file size here if the
@@ -375,6 +376,7 @@ static void unix_fill_in_inode(struct inode *tmp_inode,
 		tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
 	tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
 
+	cifsInfo->server_eof = end_of_file;
 	spin_lock(&tmp_inode->i_lock);
 	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
 		/* can not safely change the file size here if the
-- 
GitLab


From 2d6d589d8009b37ae03244059c93e0e8cf46910e Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 9 Apr 2009 00:36:44 +0000
Subject: [PATCH 0371/1421] [CIFS] remove some build warnings

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 6926023af87..01e280cab06 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2231,6 +2231,7 @@ cleanup_volume_info(struct smb_vol **pvolume_info)
 	return;
 }
 
+#ifdef CONFIG_CIFS_DFS_UPCALL
 /* build_path_to_root returns full path to root when
  * we do not have an exiting connection (tcon) */
 static char *
@@ -2260,6 +2261,7 @@ build_unc_path_to_root(const struct smb_vol *volume_info,
 	full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
 	return full_path;
 }
+#endif
 
 int
 cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
@@ -2272,12 +2274,12 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 	struct cifsTconInfo *tcon = NULL;
 	struct TCP_Server_Info *srvTcp = NULL;
 	char   *full_path;
+	char *mount_data = mount_data_global;
+#ifdef CONFIG_CIFS_DFS_UPCALL
 	struct dfs_info3_param *referrals = NULL;
 	unsigned int num_referrals = 0;
-
-	char *mount_data = mount_data_global;
-
 try_mount_again:
+#endif
 	full_path = NULL;
 
 	xid = GetXid();
-- 
GitLab


From 5144ebf408ed08380917126493450ee22e63fe3f Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Mon, 23 Mar 2009 01:47:12 -0400
Subject: [PATCH 0372/1421] cifs: remove dnotify thread code

cifs: remove dnotify thread code

Al Viro recently removed the dir_notify code from the kernel along with
the CIFS code that used it. We can also get rid of the dnotify thread
as well.

In actuality, it never had anything to do with dir_notify anyway. All
it did was unnecessarily wake up all the tasks waiting on the response
queues every 15s. Previously that happened to prevent tasks from hanging
indefinitely when the server went unresponsive, but we put those to
sleep with proper timeouts now so there's no reason to keep this around.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsfs.c | 47 -----------------------------------------------
 1 file changed, 47 deletions(-)

diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 34f5701d955..0d6d8b57365 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -66,9 +66,6 @@ unsigned int sign_CIFS_PDUs = 1;
 extern struct task_struct *oplockThread; /* remove sparse warning */
 struct task_struct *oplockThread = NULL;
 /* extern struct task_struct * dnotifyThread; remove sparse warning */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static struct task_struct *dnotifyThread = NULL;
-#endif
 static const struct super_operations cifs_super_ops;
 unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
 module_param(CIFSMaxBufSize, int, 0);
@@ -1041,34 +1038,6 @@ static int cifs_oplock_thread(void *dummyarg)
 	return 0;
 }
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static int cifs_dnotify_thread(void *dummyarg)
-{
-	struct list_head *tmp;
-	struct TCP_Server_Info *server;
-
-	do {
-		if (try_to_freeze())
-			continue;
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(15*HZ);
-		/* check if any stuck requests that need
-		   to be woken up and wakeq so the
-		   thread can wake up and error out */
-		read_lock(&cifs_tcp_ses_lock);
-		list_for_each(tmp, &cifs_tcp_ses_list) {
-			server = list_entry(tmp, struct TCP_Server_Info,
-					 tcp_ses_list);
-			if (atomic_read(&server->inFlight))
-				wake_up_all(&server->response_q);
-		}
-		read_unlock(&cifs_tcp_ses_lock);
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-#endif
-
 static int __init
 init_cifs(void)
 {
@@ -1145,21 +1114,8 @@ init_cifs(void)
 		goto out_unregister_dfs_key_type;
 	}
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-	dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
-	if (IS_ERR(dnotifyThread)) {
-		rc = PTR_ERR(dnotifyThread);
-		cERROR(1, ("error %d create dnotify thread", rc));
-		goto out_stop_oplock_thread;
-	}
-#endif
-
 	return 0;
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- out_stop_oplock_thread:
-#endif
-	kthread_stop(oplockThread);
  out_unregister_dfs_key_type:
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	unregister_key_type(&key_type_dns_resolver);
@@ -1197,9 +1153,6 @@ exit_cifs(void)
 	cifs_destroy_inodecache();
 	cifs_destroy_mids();
 	cifs_destroy_request_bufs();
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-	kthread_stop(dnotifyThread);
-#endif
 	kthread_stop(oplockThread);
 }
 
-- 
GitLab


From d9fb5c091b419e0495c50c1cce9e4cf9f7105072 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Mon, 23 Mar 2009 01:47:11 -0400
Subject: [PATCH 0373/1421] cifs: no need to use rcu_assign_pointer on
 immutable keys

cifs: no need to use rcu_assign_pointer on immutable keys

Neither keytype in use by CIFS has an "update" method. This means that
the keys are immutable once instantiated. We don't need to use RCU
to set the payload data pointers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_spnego.c | 2 +-
 fs/cifs/dns_resolve.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 3fd3a9df043..67bf93a40d2 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -41,7 +41,7 @@ cifs_spnego_key_instantiate(struct key *key, const void *data, size_t datalen)
 
 	/* attach the data */
 	memcpy(payload, data, datalen);
-	rcu_assign_pointer(key->payload.data, payload);
+	key->payload.data = payload;
 	ret = 0;
 
 error:
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 1e0c1bd8f2e..df4a306f697 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -78,7 +78,7 @@ dns_resolver_instantiate(struct key *key, const void *data,
 	}
 
 	key->type_data.x[0] = datalen;
-	rcu_assign_pointer(key->payload.data, ip);
+	key->payload.data = ip;
 
 	return rc;
 }
-- 
GitLab


From a6ce4932fbdbcd8f8e8c6df76812014351c32892 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 9 Apr 2009 01:14:32 +0000
Subject: [PATCH 0374/1421] [CIFS] Add support for posix open during lookup

This patch by utilizing lookup intents, and thus removing a network
roundtrip in the open path, improves performance dramatically on
open (30% or more) to Samba and other servers which support the
cifs posix extensions

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsglob.h |   2 +-
 fs/cifs/dir.c      | 131 +++++++++++++++++++++++++++++----------------
 fs/cifs/file.c     |  65 +++++++++++-----------
 3 files changed, 118 insertions(+), 80 deletions(-)

diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7ae19868fdc..df40ab64cd9 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -350,7 +350,7 @@ struct cifsFileInfo {
 	bool invalidHandle:1;	/* file closed via session abend */
 	bool messageMode:1;	/* for pipes: message vs byte mode */
 	atomic_t wrtPending;   /* handle in use - defer close */
-	struct semaphore fh_sem; /* prevents reopen race after dead ses*/
+	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
 	struct cifs_search_info srch_inf;
 };
 
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index e457e143434..d9006b04324 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -129,12 +129,64 @@ cifs_bp_rename_retry:
 	return full_path;
 }
 
+static void
+cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
+			struct cifsTconInfo *tcon, bool write_only)
+{
+	int oplock = 0;
+	struct cifsFileInfo *pCifsFile;
+	struct cifsInodeInfo *pCifsInode;
+
+	pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+	if (pCifsFile == NULL)
+		return;
+
+	if (oplockEnabled)
+		oplock = REQ_OPLOCK;
+
+	pCifsFile->netfid = fileHandle;
+	pCifsFile->pid = current->tgid;
+	pCifsFile->pInode = newinode;
+	pCifsFile->invalidHandle = false;
+	pCifsFile->closePend     = false;
+	mutex_init(&pCifsFile->fh_mutex);
+	mutex_init(&pCifsFile->lock_mutex);
+	INIT_LIST_HEAD(&pCifsFile->llist);
+	atomic_set(&pCifsFile->wrtPending, 0);
+
+	/* set the following in open now
+			pCifsFile->pfile = file; */
+	write_lock(&GlobalSMBSeslock);
+	list_add(&pCifsFile->tlist, &tcon->openFileList);
+	pCifsInode = CIFS_I(newinode);
+	if (pCifsInode) {
+		/* if readable file instance put first in list*/
+		if (write_only) {
+			list_add_tail(&pCifsFile->flist,
+				      &pCifsInode->openFileList);
+		} else {
+			list_add(&pCifsFile->flist,
+				 &pCifsInode->openFileList);
+		}
+		if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+			pCifsInode->clientCanCacheAll = true;
+			pCifsInode->clientCanCacheRead = true;
+			cFYI(1, ("Exclusive Oplock inode %p",
+				newinode));
+		} else if ((oplock & 0xF) == OPLOCK_READ)
+			pCifsInode->clientCanCacheRead = true;
+	}
+	write_unlock(&GlobalSMBSeslock);
+}
+
 int cifs_posix_open(char *full_path, struct inode **pinode,
 		    struct super_block *sb, int mode, int oflags,
 		    int *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
 	__u32 oplock;
+	bool write_only = false;
 	FILE_UNIX_BASIC_INFO *presp_data;
 	__u32 posix_flags = 0;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -172,6 +224,8 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 	if (oflags & O_DIRECT)
 		posix_flags |= SMB_O_DIRECT;
 
+	if (!(oflags & FMODE_READ))
+		write_only = true;
 
 	rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
 			pnetfid, presp_data, &oplock, full_path,
@@ -200,6 +254,8 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 
 	posix_fill_in_inode(*pinode, presp_data, 1);
 
+	cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+
 posix_open_ret:
 	kfree(presp_data);
 	return rc;
@@ -241,7 +297,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	char *full_path = NULL;
 	FILE_ALL_INFO *buf = NULL;
 	struct inode *newinode = NULL;
-	struct cifsInodeInfo *pCifsInode;
 	int disposition = FILE_OVERWRITE_IF;
 	bool write_only = false;
 
@@ -412,44 +467,8 @@ cifs_create_set_dentry:
 		/* mknod case - do not leave file open */
 		CIFSSMBClose(xid, tcon, fileHandle);
 	} else if (newinode) {
-		struct cifsFileInfo *pCifsFile =
-			kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
-		if (pCifsFile == NULL)
-			goto cifs_create_out;
-		pCifsFile->netfid = fileHandle;
-		pCifsFile->pid = current->tgid;
-		pCifsFile->pInode = newinode;
-		pCifsFile->invalidHandle = false;
-		pCifsFile->closePend     = false;
-		init_MUTEX(&pCifsFile->fh_sem);
-		mutex_init(&pCifsFile->lock_mutex);
-		INIT_LIST_HEAD(&pCifsFile->llist);
-		atomic_set(&pCifsFile->wrtPending, 0);
-
-		/* set the following in open now
-				pCifsFile->pfile = file; */
-		write_lock(&GlobalSMBSeslock);
-		list_add(&pCifsFile->tlist, &tcon->openFileList);
-		pCifsInode = CIFS_I(newinode);
-		if (pCifsInode) {
-			/* if readable file instance put first in list*/
-			if (write_only) {
-				list_add_tail(&pCifsFile->flist,
-					      &pCifsInode->openFileList);
-			} else {
-				list_add(&pCifsFile->flist,
-					 &pCifsInode->openFileList);
-			}
-			if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-				pCifsInode->clientCanCacheAll = true;
-				pCifsInode->clientCanCacheRead = true;
-				cFYI(1, ("Exclusive Oplock inode %p",
-					newinode));
-			} else if ((oplock & 0xF) == OPLOCK_READ)
-				pCifsInode->clientCanCacheRead = true;
-		}
-		write_unlock(&GlobalSMBSeslock);
+			cifs_fill_fileinfo(newinode, fileHandle,
+					cifs_sb->tcon, write_only);
 	}
 cifs_create_out:
 	kfree(buf);
@@ -582,17 +601,21 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 	return rc;
 }
 
-
 struct dentry *
 cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	    struct nameidata *nd)
 {
 	int xid;
 	int rc = 0; /* to get around spurious gcc warning, set to zero here */
+	int oplock = 0;
+	int mode;
+	__u16 fileHandle = 0;
+	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
 	struct inode *newInode = NULL;
 	char *full_path = NULL;
+	struct file *filp;
 
 	xid = GetXid();
 
@@ -634,12 +657,27 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	}
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
 
-	if (pTcon->unix_ext)
-		rc = cifs_get_inode_info_unix(&newInode, full_path,
-					      parent_dir_inode->i_sb, xid);
-	else
+	if (pTcon->unix_ext) {
+		if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+				(nd->flags & LOOKUP_OPEN)) {
+			if (!((nd->intent.open.flags & O_CREAT) &&
+					(nd->intent.open.flags & O_EXCL))) {
+				mode = nd->intent.open.create_mode &
+						~current->fs->umask;
+				rc = cifs_posix_open(full_path, &newInode,
+					parent_dir_inode->i_sb, mode,
+					nd->intent.open.flags, &oplock,
+					&fileHandle, xid);
+				if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
+					posix_open = true;
+			}
+		}
+		if (!posix_open)
+			rc = cifs_get_inode_info_unix(&newInode, full_path,
+						parent_dir_inode->i_sb, xid);
+	} else
 		rc = cifs_get_inode_info(&newInode, full_path, NULL,
-					 parent_dir_inode->i_sb, xid, NULL);
+				parent_dir_inode->i_sb, xid, NULL);
 
 	if ((rc == 0) && (newInode != NULL)) {
 		if (pTcon->nocase)
@@ -647,7 +685,8 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		else
 			direntry->d_op = &cifs_dentry_ops;
 		d_add(direntry, newInode);
-
+		if (posix_open)
+			filp = lookup_instantiate_filp(nd, direntry, NULL);
 		/* since paths are not looked up by component - the parent
 		   directories are presumed to be good here */
 		renew_parental_timestamps(direntry);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index dfd3e6c52a1..48c9ae09f3d 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -46,7 +46,7 @@ static inline struct cifsFileInfo *cifs_init_private(
 	memset(private_data, 0, sizeof(struct cifsFileInfo));
 	private_data->netfid = netfid;
 	private_data->pid = current->tgid;
-	init_MUTEX(&private_data->fh_sem);
+	mutex_init(&private_data->fh_mutex);
 	mutex_init(&private_data->lock_mutex);
 	INIT_LIST_HEAD(&private_data->llist);
 	private_data->pfile = file; /* needed for writepage */
@@ -284,35 +284,34 @@ int cifs_open(struct inode *inode, struct file *file)
 	cifs_sb = CIFS_SB(inode->i_sb);
 	tcon = cifs_sb->tcon;
 
-	if (file->f_flags & O_CREAT) {
-		/* search inode for this file and fill in file->private_data */
-		pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-		read_lock(&GlobalSMBSeslock);
-		list_for_each(tmp, &pCifsInode->openFileList) {
-			pCifsFile = list_entry(tmp, struct cifsFileInfo,
-					       flist);
-			if ((pCifsFile->pfile == NULL) &&
-			    (pCifsFile->pid == current->tgid)) {
-				/* mode set in cifs_create */
-
-				/* needed for writepage */
-				pCifsFile->pfile = file;
-
-				file->private_data = pCifsFile;
-				break;
-			}
-		}
-		read_unlock(&GlobalSMBSeslock);
-		if (file->private_data != NULL) {
-			rc = 0;
-			FreeXid(xid);
-			return rc;
-		} else {
-			if (file->f_flags & O_EXCL)
-				cERROR(1, ("could not find file instance for "
-					   "new file %p", file));
+	/* search inode for this file and fill in file->private_data */
+	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+	read_lock(&GlobalSMBSeslock);
+	list_for_each(tmp, &pCifsInode->openFileList) {
+		pCifsFile = list_entry(tmp, struct cifsFileInfo,
+				       flist);
+		if ((pCifsFile->pfile == NULL) &&
+		    (pCifsFile->pid == current->tgid)) {
+			/* mode set in cifs_create */
+
+			/* needed for writepage */
+			pCifsFile->pfile = file;
+
+			file->private_data = pCifsFile;
+			break;
 		}
 	}
+	read_unlock(&GlobalSMBSeslock);
+
+	if (file->private_data != NULL) {
+		rc = 0;
+		FreeXid(xid);
+		return rc;
+	} else {
+		if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+			cERROR(1, ("could not find file instance for "
+				   "new file %p", file));
+	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -500,9 +499,9 @@ static int cifs_reopen_file(struct file *file, bool can_flush)
 		return -EBADF;
 
 	xid = GetXid();
-	down(&pCifsFile->fh_sem);
+	mutex_unlock(&pCifsFile->fh_mutex);
 	if (!pCifsFile->invalidHandle) {
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		FreeXid(xid);
 		return 0;
 	}
@@ -533,7 +532,7 @@ static int cifs_reopen_file(struct file *file, bool can_flush)
 	if (full_path == NULL) {
 		rc = -ENOMEM;
 reopen_error_exit:
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		FreeXid(xid);
 		return rc;
 	}
@@ -575,14 +574,14 @@ reopen_error_exit:
 			 cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 				CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc) {
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		cFYI(1, ("cifs_open returned 0x%x", rc));
 		cFYI(1, ("oplock: %d", oplock));
 	} else {
 reopen_success:
 		pCifsFile->netfid = netfid;
 		pCifsFile->invalidHandle = false;
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		pCifsInode = CIFS_I(inode);
 		if (pCifsInode) {
 			if (can_flush) {
-- 
GitLab


From bc8cd4390c9129fbd286b10fa99972dfb68cd069 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sun, 12 Apr 2009 18:18:40 +0000
Subject: [PATCH 0375/1421] [CIFS] Fix sparse warnings

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/dir.c  | 26 +++++++++++++++++---------
 fs/cifs/file.c |  4 +---
 2 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index d9006b04324..e937da7522e 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -149,7 +149,7 @@ cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
 	pCifsFile->pid = current->tgid;
 	pCifsFile->pInode = newinode;
 	pCifsFile->invalidHandle = false;
-	pCifsFile->closePend     = false;
+	pCifsFile->closePend = false;
 	mutex_init(&pCifsFile->fh_mutex);
 	mutex_init(&pCifsFile->lock_mutex);
 	INIT_LIST_HEAD(&pCifsFile->llist);
@@ -162,20 +162,18 @@ cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
 	pCifsInode = CIFS_I(newinode);
 	if (pCifsInode) {
 		/* if readable file instance put first in list*/
-		if (write_only) {
+		if (write_only)
 			list_add_tail(&pCifsFile->flist,
 				      &pCifsInode->openFileList);
-		} else {
-			list_add(&pCifsFile->flist,
-				 &pCifsInode->openFileList);
-		}
+		else
+			list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+
 		if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
 			pCifsInode->clientCanCacheAll = true;
 			pCifsInode->clientCanCacheRead = true;
-			cFYI(1, ("Exclusive Oplock inode %p",
-				newinode));
+			cFYI(1, ("Exclusive Oplock inode %p", newinode));
 		} else if ((oplock & 0xF) == OPLOCK_READ)
-			pCifsInode->clientCanCacheRead = true;
+				pCifsInode->clientCanCacheRead = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
 }
@@ -668,6 +666,16 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 					parent_dir_inode->i_sb, mode,
 					nd->intent.open.flags, &oplock,
 					&fileHandle, xid);
+				/*
+				 * This code works around a bug in
+				 * samba posix open in samba versions 3.3.1
+				 * and earlier where create works
+				 * but open fails with invalid parameter.
+				 * If either of these error codes are
+				 * returned, follow the normal lookup.
+				 * Otherwise, the error during posix open
+				 * is handled.
+				 */
 				if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
 					posix_open = true;
 			}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 48c9ae09f3d..50ca088d886 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -307,11 +307,9 @@ int cifs_open(struct inode *inode, struct file *file)
 		rc = 0;
 		FreeXid(xid);
 		return rc;
-	} else {
-		if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
 			cERROR(1, ("could not find file instance for "
 				   "new file %p", file));
-	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
-- 
GitLab


From 88dd47fff4891545bfcfdf39146dde8380771766 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 15 Apr 2009 03:09:39 +0000
Subject: [PATCH 0376/1421] [CIFS] Fix build break caused by change to new
 current_umask helper function

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index e937da7522e..461750e0136 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -661,7 +661,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 			if (!((nd->intent.open.flags & O_CREAT) &&
 					(nd->intent.open.flags & O_EXCL))) {
 				mode = nd->intent.open.create_mode &
-						~current->fs->umask;
+						~current_umask();
 				rc = cifs_posix_open(full_path, &newInode,
 					parent_dir_inode->i_sb, mode,
 					nd->intent.open.flags, &oplock,
-- 
GitLab


From 27b87fe52baba0a55e9723030e76fce94fabcea4 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Tue, 14 Apr 2009 11:00:53 -0400
Subject: [PATCH 0377/1421] cifs: fix unicode string area word alignment in
 session setup

The handling of unicode string area alignment is wrong.
decode_unicode_ssetup improperly assumes that it will always be preceded
by a pad byte. This isn't the case if the string area is already
word-aligned.

This problem, combined with the bad buffer sizing for the serverDomain
string can cause memory corruption. The bad alignment can make it so
that the alignment of the characters is off. This can make them
translate to characters that are greater than 2 bytes each. If this
happens we can overflow the allocation.

Fix this by fixing the alignment in CIFS_SessSetup instead so we can
verify it against the head of the response. Also, clean up the
workaround for improperly terminated strings by checking for a
odd-length unicode buffers and then forcibly terminating them.

Finally, resize the buffer for serverDomain. Now that we've fixed
the alignment, it's probably fine, but a malicious server could
overflow it.

A better solution for handling these strings is still needed, but
this should be a suitable bandaid.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 44 +++++++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 5c68b4282be..70d04d08293 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -285,27 +285,26 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 	int words_left, len;
 	char *data = *pbcc_area;
 
-
-
 	cFYI(1, ("bleft %d", bleft));
 
-
-	/* SMB header is unaligned, so cifs servers word align start of
-	   Unicode strings */
-	data++;
-	bleft--; /* Windows servers do not always double null terminate
-		    their final Unicode string - in which case we
-		    now will not attempt to decode the byte of junk
-		    which follows it */
+	/*
+	 * Windows servers do not always double null terminate their final
+	 * Unicode string. Check to see if there are an uneven number of bytes
+	 * left. If so, then add an extra NULL pad byte to the end of the
+	 * response.
+	 *
+	 * See section 2.7.2 in "Implementing CIFS" for details
+	 */
+	if (bleft % 2) {
+		data[bleft] = 0;
+		++bleft;
+	}
 
 	words_left = bleft / 2;
 
 	/* save off server operating system */
 	len = UniStrnlen((wchar_t *) data, words_left);
 
-/* We look for obvious messed up bcc or strings in response so we do not go off
-   the end since (at least) WIN2K and Windows XP have a major bug in not null
-   terminating last Unicode string in response  */
 	if (len >= words_left)
 		return rc;
 
@@ -343,13 +342,10 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 		return rc;
 
 	kfree(ses->serverDomain);
-	ses->serverDomain = kzalloc(2 * (len + 1), GFP_KERNEL); /* BB FIXME wrong length */
-	if (ses->serverDomain != NULL) {
+	ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
+	if (ses->serverDomain != NULL)
 		cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
 				   nls_cp);
-		ses->serverDomain[2*len] = 0;
-		ses->serverDomain[(2*len) + 1] = 0;
-	}
 	data += 2 * (len + 1);
 	words_left -= len + 1;
 
@@ -702,12 +698,18 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	}
 
 	/* BB check if Unicode and decode strings */
-	if (smb_buf->Flags2 & SMBFLG2_UNICODE)
+	if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+		/* unicode string area must be word-aligned */
+		if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
+			++bcc_ptr;
+			--bytes_remaining;
+		}
 		rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
-						   ses, nls_cp);
-	else
+					   ses, nls_cp);
+	} else {
 		rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
 					 ses, nls_cp);
+	}
 
 ssetup_exit:
 	if (spnego_key) {
-- 
GitLab


From f083def68f84b04fe3f97312498911afce79609e Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 16 Apr 2009 11:21:52 -0400
Subject: [PATCH 0378/1421] cifs: fix buffer size for tcon->nativeFileSystem
 field

The buffer for this was resized recently to fix a bug. It's still
possible however that a malicious server could overflow this field
by sending characters in it that are >2 bytes in the local charset.
Double the size of the buffer to account for this possibility.

Also get rid of some really strange and seemingly pointless NULL
termination. It's NULL terminating the string in the source buffer,
but by the time that happens, we've already copied the string.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 01e280cab06..1a93604d98f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3756,16 +3756,13 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 			    BCC(smb_buffer_response)) {
 				kfree(tcon->nativeFileSystem);
 				tcon->nativeFileSystem =
-				    kzalloc(2*(length + 1), GFP_KERNEL);
+				    kzalloc((4 * length) + 2, GFP_KERNEL);
 				if (tcon->nativeFileSystem)
 					cifs_strfromUCS_le(
 						tcon->nativeFileSystem,
 						(__le16 *) bcc_ptr,
 						length, nls_codepage);
-				bcc_ptr += 2 * length;
-				bcc_ptr[0] = 0;	/* null terminate the string */
-				bcc_ptr[1] = 0;
-				bcc_ptr += 2;
+				bcc_ptr += (2 * length) + 2;
 			}
 			/* else do not bother copying these information fields*/
 		} else {
-- 
GitLab


From 313fecfa69bbad0a10d3313a50a89d3064f47ce1 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 16 Apr 2009 11:21:53 -0400
Subject: [PATCH 0379/1421] cifs: add cFYI messages with some of the saved
 strings from ssetup/tcon

...to make it easier to find problems in this area in the future.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 5 ++++-
 fs/cifs/sess.c    | 9 +++++++--
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 1a93604d98f..4a04ecdc1b7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3757,11 +3757,14 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 				kfree(tcon->nativeFileSystem);
 				tcon->nativeFileSystem =
 				    kzalloc((4 * length) + 2, GFP_KERNEL);
-				if (tcon->nativeFileSystem)
+				if (tcon->nativeFileSystem) {
 					cifs_strfromUCS_le(
 						tcon->nativeFileSystem,
 						(__le16 *) bcc_ptr,
 						length, nls_codepage);
+					cFYI(1, ("nativeFileSystem=%s",
+						tcon->nativeFileSystem));
+				}
 				bcc_ptr += (2 * length) + 2;
 			}
 			/* else do not bother copying these information fields*/
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 70d04d08293..c652c73760d 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -311,8 +311,10 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 	kfree(ses->serverOS);
 	/* UTF-8 string will not grow more than four times as big as UCS-16 */
 	ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
-	if (ses->serverOS != NULL)
+	if (ses->serverOS != NULL) {
 		cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
+		cFYI(1, ("serverOS=%s", ses->serverOS));
+	}
 	data += 2 * (len + 1);
 	words_left -= len + 1;
 
@@ -327,6 +329,7 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 	if (ses->serverNOS != NULL) {
 		cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
 				   nls_cp);
+		cFYI(1, ("serverNOS=%s", ses->serverNOS));
 		if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
 			cFYI(1, ("NT4 server"));
 			ses->flags |= CIFS_SES_NT4;
@@ -343,9 +346,11 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 
 	kfree(ses->serverDomain);
 	ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
-	if (ses->serverDomain != NULL)
+	if (ses->serverDomain != NULL) {
 		cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
 				   nls_cp);
+		cFYI(1, ("serverDomain=%s", ses->serverDomain));
+	}
 	data += 2 * (len + 1);
 	words_left -= len + 1;
 
-- 
GitLab


From 22c9d52bc03b880045ab1081890a38f11b272ae7 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 16 Apr 2009 13:48:49 -0400
Subject: [PATCH 0380/1421] cifs: remove unneeded bcc_ptr update in CIFSTCon

This pointer isn't used again after this point. It's also not updated in
the ascii case, so there's no need to update it here.

Pointed-out-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4a04ecdc1b7..bacdef1546b 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3765,7 +3765,6 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 					cFYI(1, ("nativeFileSystem=%s",
 						tcon->nativeFileSystem));
 				}
-				bcc_ptr += (2 * length) + 2;
 			}
 			/* else do not bother copying these information fields*/
 		} else {
-- 
GitLab


From 78a49990269a539fc77e9a669d9e74e1dfaec657 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Fri, 17 Apr 2009 10:46:25 +0900
Subject: [PATCH 0381/1421] m32r: move include/asm-m32r/* to
 arch/m32r/include/asm/

Move remained files, ftrace.h and swab.h, to arch/m32r/include/asm/.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 {include/asm-m32r => arch/m32r/include/asm}/ftrace.h | 0
 {include/asm-m32r => arch/m32r/include/asm}/swab.h   | 0
 2 files changed, 0 insertions(+), 0 deletions(-)
 rename {include/asm-m32r => arch/m32r/include/asm}/ftrace.h (100%)
 rename {include/asm-m32r => arch/m32r/include/asm}/swab.h (100%)

diff --git a/include/asm-m32r/ftrace.h b/arch/m32r/include/asm/ftrace.h
similarity index 100%
rename from include/asm-m32r/ftrace.h
rename to arch/m32r/include/asm/ftrace.h
diff --git a/include/asm-m32r/swab.h b/arch/m32r/include/asm/swab.h
similarity index 100%
rename from include/asm-m32r/swab.h
rename to arch/m32r/include/asm/swab.h
-- 
GitLab


From 243b706d8a71364ad6080328d45b73516c8af5f3 Mon Sep 17 00:00:00 2001
From: Christophe Borivant <christophe.borivant@wanadoo.fr>
Date: Fri, 17 Apr 2009 11:39:39 +0200
Subject: [PATCH 0382/1421] HID: Add support for the G25 force feedback wheel
 in native mode

Add Product Id 0xc299 for the Logitech G25 force feedback wheel
The Logitech G25 force feedback wheel, is first recognize by the kernel
with the product id "0xc294". In this mode, we can't use all the axes
and buttons of the wheel.

Using a userland utility, it is possible to make the wheel switch to native
mode -- http://svn.vdrift.net/viewvc.cgi/trunk/tools/G25manage/?root=VDrift
In native mode, the wheel change its id number to "0xc299".

The packet that needs to be sent to the wheel to swtich to native mode and
change its PID is

	{ 0xf8, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00 }

Signed-off-by: Christophe Borivant <christophe.borivant@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-core.c | 1 +
 drivers/hid/hid-ids.h  | 1 +
 drivers/hid/hid-lg.c   | 2 ++
 3 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5746a5903bc..c7075d2b078 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index bdeda4c7cc1..aa1b995dd03 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -292,6 +292,7 @@
 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO	0xc286
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL	0xc295
+#define USB_DEVICE_ID_LOGITECH_G25_WHEEL	0xc299
 #define USB_DEVICE_ID_LOGITECH_ELITE_KBD	0xc30a
 #define USB_DEVICE_ID_S510_RECEIVER	0xc50c
 #define USB_DEVICE_ID_S510_RECEIVER_2	0xc517
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 7b80cb69498..7afbaa0efd1 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -297,6 +297,8 @@ static const struct hid_device_id lg_devices[] = {
 		.driver_data = LG_FF },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2),
 		.driver_data = LG_FF },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
+		.driver_data = LG_FF },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
 		.driver_data = LG_FF2 },
 	{ }
-- 
GitLab


From 5a47fa3d30b5d1977b4e7d1daf5ba5b577258ce1 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 16 Apr 2009 23:54:04 +0200
Subject: [PATCH 0383/1421] ALSA: emu10k1 - off by 1 in snd_emu10k1_wait()

With `while (count++ < 16384)' count reaches 16385.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/emu10k1/io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index 4bfc31d1b28..c1a5aa15af8 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -490,7 +490,7 @@ void snd_emu10k1_wait(struct snd_emu10k1 *emu, unsigned int wait)
 			if (newtime != curtime)
 				break;
 		}
-		if (count >= 16384)
+		if (count > 16384)
 			break;
 		curtime = newtime;
 	}
-- 
GitLab


From 3126a1790e897252868941bd29a3dd526b506804 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 15 Apr 2009 23:38:45 -0700
Subject: [PATCH 0384/1421] ALSA: MAINTAINERS - Update SOUND

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0cb20d82169..c7ba93599d4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5187,7 +5187,12 @@ M:	perex@perex.cz
 P:	Takashi Iwai
 M:	tiwai@suse.de
 L:	alsa-devel@alsa-project.org (subscribers-only)
+W:	http://www.alsa-project.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
+F:	Documentation/sound/
+F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-- 
GitLab


From 60c8a774fb7971cec4a72fd5d002f39668826808 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 17 Apr 2009 03:59:42 -0700
Subject: [PATCH 0385/1421] sparc64: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/configs/sparc64_defconfig | 182 +++++++++++++++++----------
 1 file changed, 119 insertions(+), 63 deletions(-)

diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index ade49941def..b5d63bd8716 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan  2 18:14:26 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 02:03:07 2009
 #
+CONFIG_64BIT=y
 CONFIG_SPARC=y
+# CONFIG_SPARC32 is not set
 CONFIG_SPARC64=y
 CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
 CONFIG_BITS=64
-CONFIG_64BIT=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -22,6 +23,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +38,27 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -55,24 +67,28 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -82,6 +98,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -91,15 +108,16 @@ CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -107,10 +125,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -127,11 +143,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,11 +196,12 @@ CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
@@ -210,6 +222,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_SUN_OPENPROMFS=m
 CONFIG_SPARC64_PCI=y
@@ -229,8 +243,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -292,25 +304,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+# CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
@@ -326,6 +320,7 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -334,18 +329,19 @@ CONFIG_VLAN_8021Q=m
 #
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -389,19 +385,27 @@ CONFIG_SUNVDC=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
@@ -439,6 +443,7 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -506,8 +511,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -528,6 +535,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -536,7 +544,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=m
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -561,6 +569,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -589,14 +598,16 @@ CONFIG_PHYLIB=m
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=m
 # CONFIG_SUNBMAC is not set
 # CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_CASSINI=m
+CONFIG_SUNGEM=m
+# CONFIG_CASSINI is not set
 CONFIG_SUNVNET=m
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -631,9 +642,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_MYRI_SBUS is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -648,6 +660,7 @@ CONFIG_BNX2=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -657,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 CONFIG_NIU=m
@@ -666,6 +680,7 @@ CONFIG_NIU=m
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -673,7 +688,10 @@ CONFIG_NIU=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -738,7 +756,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -805,6 +822,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -867,12 +885,9 @@ CONFIG_I2C_ALGOBIT=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -897,12 +912,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -917,10 +934,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -957,10 +978,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -1053,6 +1076,7 @@ CONFIG_FB_ATY_GX=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1141,6 +1165,8 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1197,28 +1223,31 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1247,6 +1276,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1268,18 +1298,17 @@ CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1315,7 +1344,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1327,6 +1355,11 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1390,6 +1423,7 @@ CONFIG_RTC_DRV_BQ4802=y
 CONFIG_RTC_DRV_SUN4V=y
 CONFIG_RTC_DRV_STARFIRE=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1412,6 +1446,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -1426,6 +1461,7 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1434,6 +1470,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1460,10 +1501,7 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1473,6 +1511,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1481,6 +1520,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1555,6 +1595,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1590,10 +1633,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1602,18 +1647,21 @@ CONFIG_TRACING=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
 # CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 
 #
 # Security options
@@ -1642,10 +1690,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 CONFIG_CRYPTO_TEST=m
@@ -1715,6 +1765,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1723,11 +1774,13 @@ CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
@@ -1737,8 +1790,11 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
-- 
GitLab


From a40ac3414eb4122345efd071f787a349a30fccf7 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 17 Apr 2009 04:05:06 -0700
Subject: [PATCH 0386/1421] sparc32: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/configs/sparc32_defconfig | 98 +++++++++++++++++++---------
 1 file changed, 68 insertions(+), 30 deletions(-)

diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 09ab46e4c59..8bcd27af724 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Thu Jan  8 16:45:44 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 04:04:46 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -30,17 +30,27 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -49,24 +59,28 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -75,12 +89,15 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -93,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -109,11 +125,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -144,6 +155,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
 CONFIG_SERIAL_CONSOLE=y
@@ -159,6 +172,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_SUN_OPENPROMFS=m
 CONFIG_SPARC32_PCI=y
@@ -175,8 +189,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -251,6 +263,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -263,7 +276,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -313,12 +325,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -375,8 +391,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -398,6 +416,7 @@ CONFIG_SCSI_QLOGICPTI=m
 CONFIG_SCSI_SUNESP=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -413,6 +432,7 @@ CONFIG_SCSI_SUNESP=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@ CONFIG_SUNQE=m
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -448,6 +470,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_MYRI_SBUS is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -462,6 +485,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -471,6 +495,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -480,6 +505,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -487,7 +513,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -537,7 +562,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -597,6 +621,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -688,7 +713,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -700,7 +724,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -750,6 +774,7 @@ CONFIG_RTC_DRV_M48T59=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -777,6 +802,7 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -785,6 +811,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -820,14 +851,20 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -838,7 +875,6 @@ CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -911,6 +947,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -939,15 +978,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_KGDB=y
@@ -979,10 +1010,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1059,6 +1093,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1074,7 +1109,10 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From ec5cfbfc05b180a026b4ebce72f341ee196de262 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 17 Apr 2009 12:36:43 +0100
Subject: [PATCH 0387/1421] [ARM] S3C24XX: Fix sparse error in gpiolib.c

Fix the following sparse error generated by including
<plat/gpio-core.h> instead of <mach/gpio-core.h>

gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpiolib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 94a341aaa4e..5c0491bf738 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,7 +19,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-- 
GitLab


From ad14ff37496baa4bee98ea99db8bb8615c648b49 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 17 Apr 2009 12:36:44 +0100
Subject: [PATCH 0388/1421] [ARM] S3C: Fix sparse warning from missing
 's3c_device_hwmon'

Fix the following sparse warning due to s3c_device_hwmon being
missing from <plat/devs.h>

devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/devs.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 6b1b5231511..26f0cec3ac0 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
-- 
GitLab


From 59c1ab60909ffacbf978ac72e4bb1d40d79f1465 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 17 Apr 2009 12:36:45 +0100
Subject: [PATCH 0389/1421] [ARM] JIVE: Fix sparse warnings about items which
 should be static

Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as
they are not exported, and are generating the following sparse
warnings:

mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static?
mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/mach-jive.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index d324f089edd..8f0d37d43b4 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -277,7 +277,7 @@ __setup("mtdset=", jive_mtdset);
 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
 
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
 	[0] = {
 		.width		= LCD_XRES,
 		.height		= LCD_YRES,
@@ -310,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = {
 #define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
 #define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
 
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
 	.displays	 = jive_vgg2432a4_display,
 	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
 	.default_display = 0,
-- 
GitLab


From 019dbaa11db56d8e5d868e02421ff236a054c0d8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 17 Apr 2009 12:36:46 +0100
Subject: [PATCH 0390/1421] [ARM] Anubis: Fix sparse warnings for items that
 should be static

Make 'anubis_ide_platdata' statis as it is not used outside
the file it is in, fixing the following sparse warning:

mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/mach-anubis.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b05d56e230a..9c6abf9fb54 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = {
 
 /* IDE channels */
 
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
 	.ioport_shift	= 5,
 };
 
-- 
GitLab


From 2a96ad05e93be75398871a2fce932ed234d03112 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 17 Apr 2009 12:36:47 +0100
Subject: [PATCH 0391/1421] [ARM] Osiris: Fix double initialisation in machine
 block

The .init_machine entry in mach-osiris.c had the same entry
twice, so remove one definition to fix the following warning
from sparse:

mach-osiris.c:416:3: warning: Initializer entry defined twice
mach-osiris.c:418:3:   also defined here

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/mach-osiris.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 41a00f57e5d..c8a46685ce3 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= osiris_map_io,
-	.init_machine	= osiris_init,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-- 
GitLab


From f8c8ac8109ecdd3583b0ac9fd3adf058678a802e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 17 Apr 2009 12:36:49 +0100
Subject: [PATCH 0392/1421] [ARM] S3C: Fix ADC driver sparse warning

The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c
does not need to be exported and thus should be static.

This fixes the following sparse warning:

adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 9a5c767e0a4..bc6f6a14dd1 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc)
 		readl(adc->regs + S3C2410_ADCDLY));
 }
 
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
 {
 	struct s3c_adc_client *next = adc->ts_pend;
 
-- 
GitLab


From 0c3ee078251b85812e585b5cf5d1635afd73f4e2 Mon Sep 17 00:00:00 2001
From: Ramax Lo <ramaxlo@gmail.com>
Date: Tue, 14 Apr 2009 23:56:18 +0800
Subject: [PATCH 0393/1421] [ARM] S3C24XX: ADC: Check pending queue before
 freeing adc client

Check pending queue and remove the adc client being released.

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/adc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index bc6f6a14dd1..91adfa71c17 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register);
 void s3c_adc_release(struct s3c_adc_client *client)
 {
 	/* We should really check that nothing is in progress. */
+	if (adc_dev->cur == client)
+		adc_dev->cur = NULL;
+	if (adc_dev->ts_pend == client)
+		adc_dev->ts_pend = NULL;
+	else {
+		struct list_head *p, *n;
+		struct s3c_adc_client *tmp;
+
+		list_for_each_safe(p, n, &adc_pending) {
+			tmp = list_entry(p, struct s3c_adc_client, pend);
+			if (tmp == client)
+				list_del(&tmp->pend);
+		}
+	}
+
+	if (adc_dev->cur == NULL)
+		s3c_adc_try(adc_dev);
 	kfree(client);
 }
 EXPORT_SYMBOL_GPL(s3c_adc_release);
-- 
GitLab


From f600f6c4824d7e40be370f7e26ab0fbc3f6f911c Mon Sep 17 00:00:00 2001
From: Karsten Wiese <fzu@wemgehoertderstaat.de>
Date: Thu, 16 Apr 2009 19:35:01 +0200
Subject: [PATCH 0394/1421] ALSA: us122l: Fix signedness in comparisions

Within 2.6.30's mergewindow, struct urb's transfer_buffer_length has become
unsigned. This changed an "int > int" comparision to an "unsigned > int" one
in snd_usb_122l.
Fix this by using a local int variable instead of urb->transfer_buffer_length
in comparisions.

Shorten playback_prep_freqn() a bit and tweak error-paths in
usb_stream_prepare_playback().

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/usx2y/usb_stream.c | 67 ++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 37 deletions(-)

diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c
index 24393dafcb6..12ae0340adc 100644
--- a/sound/usb/usx2y/usb_stream.c
+++ b/sound/usb/usx2y/usb_stream.c
@@ -33,32 +33,26 @@ static unsigned usb_stream_next_packet_size(struct usb_stream_kernel *sk)
 static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb)
 {
 	struct usb_stream *s = sk->s;
-	unsigned l = 0;
-	int pack;
-
-	urb->iso_frame_desc[0].offset = 0;
-	urb->iso_frame_desc[0].length =	usb_stream_next_packet_size(sk);
-	sk->out_phase = sk->out_phase_peeked;
-	urb->transfer_buffer_length = urb->iso_frame_desc[0].length;
-
-	for (pack = 1; pack < sk->n_o_ps; pack++) {
-		l = usb_stream_next_packet_size(sk);
-		if (s->idle_outsize + urb->transfer_buffer_length + l >
-		    s->period_size)
+	int pack, lb = 0;
+
+	for (pack = 0; pack < sk->n_o_ps; pack++) {
+		int l = usb_stream_next_packet_size(sk);
+		if (s->idle_outsize + lb + l > s->period_size)
 			goto check;
 
 		sk->out_phase = sk->out_phase_peeked;
-		urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length;
+		urb->iso_frame_desc[pack].offset = lb;
 		urb->iso_frame_desc[pack].length = l;
-		urb->transfer_buffer_length += l;
+		lb += l;
 	}
-	snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length);
+	snd_printdd(KERN_DEBUG "%i\n", lb);
 
 check:
 	urb->number_of_packets = pack;
-	s->idle_outsize += urb->transfer_buffer_length - s->period_size;
+	urb->transfer_buffer_length = lb;
+	s->idle_outsize += lb - s->period_size;
 	snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize,
-		    urb->transfer_buffer_length, s->period_size);
+		    lb, s->period_size);
 }
 
 static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
@@ -282,21 +276,20 @@ static int usb_stream_prepare_playback(struct usb_stream_kernel *sk,
 	struct usb_stream *s = sk->s;
 	struct urb *io;
 	struct usb_iso_packet_descriptor *id, *od;
-	int p, l = 0;
+	int p = 0, lb = 0, l = 0;
 
 	io = sk->idle_outurb;
 	od = io->iso_frame_desc;
-	io->transfer_buffer_length = 0;
 
-	for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) {
+	for (; s->sync_packet < 0; ++p, ++s->sync_packet) {
 		struct urb *ii = sk->completed_inurb;
 		id = ii->iso_frame_desc +
 			ii->number_of_packets + s->sync_packet;
 		l = id->actual_length;
 
 		od[p].length = l;
-		od[p].offset = io->transfer_buffer_length;
-		io->transfer_buffer_length += l;
+		od[p].offset = lb;
+		lb += l;
 	}
 
 	for (;
@@ -304,38 +297,38 @@ static int usb_stream_prepare_playback(struct usb_stream_kernel *sk,
 	     ++p, ++s->sync_packet) {
 		l = inurb->iso_frame_desc[s->sync_packet].actual_length;
 
-		if (s->idle_outsize + io->transfer_buffer_length + l >
-		    s->period_size)
+		if (s->idle_outsize + lb + l > s->period_size)
 			goto check_ok;
 
 		od[p].length = l;
-		od[p].offset = io->transfer_buffer_length;
-		io->transfer_buffer_length += l;
+		od[p].offset = lb;
+		lb += l;
 	}
 
 check_ok:
 	s->sync_packet -= inurb->number_of_packets;
-	if (s->sync_packet < -2 || s->sync_packet > 0) {
+	if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) {
 		snd_printk(KERN_WARNING "invalid sync_packet = %i;"
 			   " p=%i nop=%i %i %x %x %x > %x\n",
 			   s->sync_packet, p, inurb->number_of_packets,
-			   s->idle_outsize + io->transfer_buffer_length + l,
-			   s->idle_outsize, io->transfer_buffer_length,  l,
+			   s->idle_outsize + lb + l,
+			   s->idle_outsize, lb,  l,
 			   s->period_size);
 		return -1;
 	}
-	if (io->transfer_buffer_length % s->cfg.frame_size) {
+	if (unlikely(lb % s->cfg.frame_size)) {
 		snd_printk(KERN_WARNING"invalid outsize = %i\n",
-			   io->transfer_buffer_length);
+			   lb);
 		return -1;
 	}
-	s->idle_outsize += io->transfer_buffer_length - s->period_size;
+	s->idle_outsize += lb - s->period_size;
 	io->number_of_packets = p;
-	if (s->idle_outsize > 0) {
-		snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
-		return -1;
-	}
-	return 0;
+	io->transfer_buffer_length = lb;
+	if (s->idle_outsize <= 0)
+		return 0;
+
+	snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
+	return -1;
 }
 
 static void prepare_inurb(int number_of_packets, struct urb *iu)
-- 
GitLab


From b80901bbf599553f483b9509f2dce416b938aae8 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 16 Apr 2009 19:09:55 -0700
Subject: [PATCH 0395/1421] splice: fix new kernel-doc warnings

splice: fix kernel-doc warnings

  Warning(fs/splice.c:617): bad line:
  Warning(fs/splice.c:722): No description found for parameter 'sd'
  Warning(fs/splice.c:722): Excess function parameter 'pipe' description in 'splice_from_pipe_begin'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/splice.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 5384a90665d..666953d59a3 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -614,7 +614,6 @@ static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
  * @actor:	handler that splices the data
  *
  * Description:
-
  *    This function loops over the pipe and calls @actor to do the
  *    actual moving of a single struct pipe_buffer to the desired
  *    destination.  It returns when there's no more buffers left in
@@ -711,7 +710,7 @@ EXPORT_SYMBOL(splice_from_pipe_next);
 
 /**
  * splice_from_pipe_begin - start splicing from pipe
- * @pipe:	pipe to splice from
+ * @sd:		information about the splice operation
  *
  * Description:
  *    This function should be called before a loop containing
-- 
GitLab


From 1a297286868e13274ab02ec0626a00054fb0a5de Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Fri, 17 Apr 2009 11:39:38 +0200
Subject: [PATCH 0396/1421] ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and
 SSCR0_SCR

Those macros are just screwed as soon as CONFIG_PXA25x is enabled.

This patch
- changes ssp_set_scr to take an ssp_dev pointer instead of ssp_device
- adds a corresponding ssp_get_scr function.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/pxa/pxa-ssp.c | 36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 152118cb5d6..74ff69e3ce3 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -280,12 +280,33 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
  * ssp_set_clkdiv - set SSP clock divider
  * @div: serial clock rate divider
  */
-static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+static void ssp_set_scr(struct ssp_device *ssp, u32 div)
 {
-	struct ssp_device *ssp = dev->ssp;
-	u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+	u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+
+	if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+		sscr0 &= ~0x0000ff00;
+		sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+	} else {
+		sscr0 &= ~0x000fff00;
+		sscr0 |= (div - 1) << 8;     /* 1..4096 */
+	}
+	ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/**
+ * ssp_get_clkdiv - get SSP clock divider
+ */
+static u32 ssp_get_scr(struct ssp_device *ssp)
+{
+	u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+	u32 div;
 
-	ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+	if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+		div = ((sscr0 >> 8) & 0xff) * 2 + 2;
+	else
+		div = ((sscr0 >> 8) & 0xfff) + 1;
+	return div;
 }
 
 /*
@@ -326,7 +347,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 		break;
 	case PXA_SSP_CLK_AUDIO:
 		priv->sysclk = 0;
-		ssp_set_scr(&priv->dev, 1);
+		ssp_set_scr(ssp, 1);
 		sscr0 |= SSCR0_ACS;
 		break;
 	default:
@@ -387,7 +408,7 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
 		ssp_write_reg(ssp, SSACD, val);
 		break;
 	case PXA_SSP_DIV_SCR:
-		ssp_set_scr(&priv->dev, div);
+		ssp_set_scr(ssp, div);
 		break;
 	default:
 		return -ENODEV;
@@ -674,8 +695,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
 	case SND_SOC_DAIFMT_I2S:
 	       sspsp = ssp_read_reg(ssp, SSPSP);
 
-		if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
-		     (width == 16)) {
+		if ((ssp_get_scr(ssp) == 4) && (width == 16)) {
 			/* This is a special case where the bitclk is 64fs
 			* and we're not dealing with 2*32 bits of audio
 			* samples.
-- 
GitLab


From b08f7a62cafd7998862072a1c353219e3d84bbef Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Fri, 17 Apr 2009 14:42:26 +0300
Subject: [PATCH 0397/1421] ASoC: OMAP: Update contact addresses

My email address is going to expire soon so update it. Adding also
Peter Ujfalusi <peter.ujfalusi@nokia.com> as a second contact to OMAP core
drivers since I won't have anymore access to non-public OMAP documentation
in the future and Peter is working with these drivers as well.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/omap/n810.c       | 4 ++--
 sound/soc/omap/omap-mcbsp.c | 5 +++--
 sound/soc/omap/omap-mcbsp.h | 3 ++-
 sound/soc/omap/omap-pcm.c   | 5 +++--
 sound/soc/omap/omap-pcm.h   | 3 ++-
 5 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index a6d1178ce12..91ef17992de 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -417,6 +417,6 @@ static void __exit n810_soc_exit(void)
 module_init(n810_soc_init);
 module_exit(n810_soc_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
 MODULE_DESCRIPTION("ALSA SoC Nokia N810");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 90f4df7fd90..91261428384 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -532,6 +533,6 @@ static void __exit snd_omap_mcbsp_exit(void)
 }
 module_exit(snd_omap_mcbsp_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
 MODULE_DESCRIPTION("OMAP I2S SoC Interface");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index df7ad13ba73..c8147aace81 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 8e1431cb46b..b078ed537bc 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -367,6 +368,6 @@ static void __exit omap_soc_platform_exit(void)
 }
 module_exit(omap_soc_platform_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
 MODULE_DESCRIPTION("OMAP PCM DMA module");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h
index e4369bdfd77..8d9d26916b0 100644
--- a/sound/soc/omap/omap-pcm.h
+++ b/sound/soc/omap/omap-pcm.h
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
-- 
GitLab


From c8a250058656495be02c00de61e26b017c86ef00 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Fri, 17 Apr 2009 09:40:49 +0200
Subject: [PATCH 0398/1421] lockdep: more robust lockdep_map init sequence

Steven Rostedt reported:

> OK, I think I figured this bug out. This is a lockdep issue with respect
> to tracepoints.
>
> The trace points in lockdep are called all the time. Outside the lockdep
> logic. But if lockdep were to trigger an error / warning (which this run
> did) we might be in trouble. For new locks, like the dentry->d_lock, that
> are created, they will not get a name:
>
> void lockdep_init_map(struct lockdep_map *lock, const char *name,
>                       struct lock_class_key *key, int subclass)
> {
>         if (unlikely(!debug_locks))
>                 return;
>
> When a problem is found by lockdep, debug_locks becomes false. Thus we
> stop allocating names for locks. This dentry->d_lock I had, now has no
> name. Worse yet, I have CONFIG_DEBUG_VM set, that scrambles non
> initialized memory. Thus, when the trace point was hit, it had junk for
> the lock->name, and the machine crashed.

Ah, nice catch. I think we should put at least the name in regardless.

Ensure we at least initialize the trivial entries of the depmap so that
they can be relied upon, even when lockdep itself decided to pack up and
go home.

[ Impact: fix lock tracing after lockdep warnings. ]

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1239954049.23397.4156.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/lockdep.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index b0f01186696..accb40cdb12 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -2490,13 +2490,20 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 void lockdep_init_map(struct lockdep_map *lock, const char *name,
 		      struct lock_class_key *key, int subclass)
 {
-	if (unlikely(!debug_locks))
+	lock->class_cache = NULL;
+#ifdef CONFIG_LOCK_STAT
+	lock->cpu = raw_smp_processor_id();
+#endif
+
+	if (DEBUG_LOCKS_WARN_ON(!name)) {
+		lock->name = "NULL";
 		return;
+	}
+
+	lock->name = name;
 
 	if (DEBUG_LOCKS_WARN_ON(!key))
 		return;
-	if (DEBUG_LOCKS_WARN_ON(!name))
-		return;
 	/*
 	 * Sanity check, the lock-class key must be persistent:
 	 */
@@ -2505,12 +2512,11 @@ void lockdep_init_map(struct lockdep_map *lock, const char *name,
 		DEBUG_LOCKS_WARN_ON(1);
 		return;
 	}
-	lock->name = name;
 	lock->key = key;
-	lock->class_cache = NULL;
-#ifdef CONFIG_LOCK_STAT
-	lock->cpu = raw_smp_processor_id();
-#endif
+
+	if (unlikely(!debug_locks))
+		return;
+
 	if (subclass)
 		register_lock_class(lock, subclass, 1);
 }
-- 
GitLab


From 93e82ae781e1ca4797cf2a226d3c303975bd99c7 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 17 Apr 2009 18:04:41 +0200
Subject: [PATCH 0399/1421] ALSA: hda - Set function_id only on FG nodes

(Re)set function_id only from the value on FG nodes.
The current code overrides the value with the last widget.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index fd6e6f337d1..8820faf6c9d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -642,19 +642,21 @@ static int get_codec_name(struct hda_codec *codec)
  */
 static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
 {
-	int i, total_nodes;
+	int i, total_nodes, function_id;
 	hda_nid_t nid;
 
 	total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
 	for (i = 0; i < total_nodes; i++, nid++) {
-		codec->function_id = snd_hda_param_read(codec, nid,
+		function_id = snd_hda_param_read(codec, nid,
 						AC_PAR_FUNCTION_TYPE) & 0xff;
-		switch (codec->function_id) {
+		switch (function_id) {
 		case AC_GRP_AUDIO_FUNCTION:
 			codec->afg = nid;
+			codec->function_id = function_id;
 			break;
 		case AC_GRP_MODEM_FUNCTION:
 			codec->mfg = nid;
+			codec->function_id = function_id;
 			break;
 		default:
 			break;
-- 
GitLab


From d29a2e943867bfa48f72ee6e99723a1b29fe6f7e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 17 Apr 2009 12:22:35 +0100
Subject: [PATCH 0400/1421] vfat: Note the NLS requirement

Close bug #4754. Stop people getting into a situation where they can't
get their FAT filesystems to mount as they expect.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
index d0a69ff2537..182f9ffe2b5 100644
--- a/fs/fat/Kconfig
+++ b/fs/fat/Kconfig
@@ -95,3 +95,6 @@ config FAT_DEFAULT_IOCHARSET
 	  Note that "utf8" is not recommended for FAT filesystems.
 	  If unsure, you shouldn't set "utf8" here.
 	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+	  Enable any character sets you need in File Systems/Native Language
+	  Support.
-- 
GitLab


From 6566abdbd0566fc1b5950c9f87ef57c7443d6fa8 Mon Sep 17 00:00:00 2001
From: Matt Kraai <kraai@ftbfs.org>
Date: Fri, 17 Apr 2009 12:56:38 +0100
Subject: [PATCH 0401/1421] AFS: Guard afs_file_readpage_read_complete()
 definition with CONFIG_AFS_FSCACHE
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

If CONFIG_AFS_FSCACHE is not defined, the following warning is displayed when
fs/afs/file.c is compiled:

 fs/afs/file.c:111: warning: ‘afs_file_readpage_read_complete’ defined but not used

This occurs because all calls to this function are guarded by
CONFIG_AFS_FSCACHE.  Thus, guard its definition as well.

Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/afs/file.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/afs/file.c b/fs/afs/file.c
index 7a1d942ef68..0149dab365e 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -102,6 +102,7 @@ int afs_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+#ifdef CONFIG_AFS_FSCACHE
 /*
  * deal with notification that a page was read from the cache
  */
@@ -117,6 +118,7 @@ static void afs_file_readpage_read_complete(struct page *page,
 		SetPageUptodate(page);
 	unlock_page(page);
 }
+#endif
 
 /*
  * AFS read page from file, directory or symlink
-- 
GitLab


From df42654e90b3045691f4c327075897aed9691ebe Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 17 Apr 2009 09:59:27 -0700
Subject: [PATCH 0402/1421] Get rid of final remnants of include/asm-$(ARCH)

This renames include/asm-h8300/timer.h into arch/h8300/include/asm: it
was left over just because that file had been created in the -mm tree
before the whole h8300 header subdirectory had been moved, and then got
merged in the old location afterwards.

(See commits e0b0f9e4ead2468f84c26332ec42b118e76af572: "h8300: update
timer handler - new files" and 758db3f2118703a1e36374dae5d58bed963e7e0d:
"[h8300] move include/asm-h8300 to arch/h8300/include/asm" for details).

This also removes a left-over .gitignore file in include/asm-arm that
became stale when the ARM header files were moved (which happened in
multiple commits, just see "git log -- include/asm-arm" for details).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 {include/asm-h8300 => arch/h8300/include/asm}/timer.h | 0
 include/asm-arm/.gitignore                            | 2 --
 2 files changed, 2 deletions(-)
 rename {include/asm-h8300 => arch/h8300/include/asm}/timer.h (100%)
 delete mode 100644 include/asm-arm/.gitignore

diff --git a/include/asm-h8300/timer.h b/arch/h8300/include/asm/timer.h
similarity index 100%
rename from include/asm-h8300/timer.h
rename to arch/h8300/include/asm/timer.h
diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore
deleted file mode 100644
index e02c15d158f..00000000000
--- a/include/asm-arm/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-arch
-mach-types.h
-- 
GitLab


From 237e75bf1e558f7330f8deb167fa3116405bef2c Mon Sep 17 00:00:00 2001
From: Jonathan McDowell <noodles@earth.li>
Date: Thu, 26 Mar 2009 00:45:27 -0700
Subject: [PATCH 0403/1421] usb gadget: fix ethernet link reports to ethtool

The g_ether USB gadget driver currently decides whether or not there's a
link to report back for eth_get_link based on if the USB link speed is
set. The USB gadget speed is however often set even before the device is
enumerated. It seems more sensible to only report a "link" if we're
actually connected to a host that wants to talk to us. The patch below
does this for me - tested with the PXA27x UDC driver.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/u_ether.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 96d65ca06ec..4007770f7ed 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
 	strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
 }
 
-static u32 eth_get_link(struct net_device *net)
-{
-	struct eth_dev	*dev = netdev_priv(net);
-	return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
 /* REVISIT can also support:
  *   - WOL (by tracking suspends and issuing remote wakeup)
  *   - msglevel (implies updated messaging)
@@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net)
 
 static struct ethtool_ops ops = {
 	.get_drvinfo = eth_get_drvinfo,
-	.get_link = eth_get_link
+	.get_link = ethtool_op_get_link,
 };
 
 static void defer_kevent(struct eth_dev *dev, int flag)
-- 
GitLab


From ae27d84351f1f3568118318a8c40ff3a154bd629 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 25 Mar 2009 11:32:59 +0100
Subject: [PATCH 0404/1421] USB: ftdi_sio: add vendor/project id for JETI
 specbos 1201 spectrometer

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 1 +
 drivers/usb/serial/ftdi_sio.h | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dcc87aaa862..8100f1d2590 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(DE_VID, WHT_PID) },
 	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index daaf63db0b5..c09f658a448 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -912,6 +912,13 @@
 #define ADI_VID 		0x0456
 #define ADI_GNICE_PID 		0xF000
 
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
-- 
GitLab


From c00deaa542100a697acb5be200b9f54317c1cf69 Mon Sep 17 00:00:00 2001
From: Pascal Terjan <pterjan@mandriva.com>
Date: Tue, 7 Apr 2009 14:40:42 +0200
Subject: [PATCH 0405/1421] USB: option: Add ids for D-Link DWM-652 3.5G modem

This patch allows D-Link DWM-652 3.5G modem to work.
It is an express card but was only tested with the provided usb adapter as I
don't have machines with express card connector.

/dev/ttyUSB{0,1,2} get created, and using comgt on ttyUSB1 works fine :

[root@plop tmp]# comgt -d /dev/ttyUSB1 -e

Enter PIN number: XXXX
Waiting for Registration..(120 sec max).
Registered on Home network: "Orange France",2
Signal Quality: 15,99

From: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c        | 5 +++++
 drivers/usb/storage/unusual_devs.h | 8 ++++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d560c0b54e6..47bd070f24b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -300,6 +300,10 @@ static int  option_resume(struct usb_serial *serial);
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
 
+#define DLINK_VENDOR_ID				0x1186
+#define DLINK_PRODUCT_DWM_652			0x3e04
+
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
 	{ } /* Terminating entry */
 };
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1c1f643e8a7..6ff2b283edb 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1376,6 +1376,14 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
+           "D-Link",
+           "USB Mass Storage",
+           US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
-- 
GitLab


From f05932c0caf40c43af8a2c21adf7c46a00c436c4 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Sat, 4 Apr 2009 17:24:24 +0100
Subject: [PATCH 0406/1421] USB: qcserial: Add extra device IDs

Add a set of device IDs from the Windows drivers. These aren't complete
(there's a couple of cases where a QDL device is identified without the
associated modem being identified), but it's better than the current
situation.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/qcserial.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e6d6b0c17fd..7528b8d57f1 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
GitLab


From e13c594f3a1fc2c78e7a20d1a07974f71e4b448f Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Sat, 4 Apr 2009 09:25:15 +0200
Subject: [PATCH 0407/1421] USB: fix oops in cdc-wdm in case of malformed
 descriptors

cdc-wdm needs to ignore extremely malformed descriptors.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 3771d6e6d0c..34e6108e1d4 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -652,7 +652,7 @@ next_desc:
 
 	iface = &intf->altsetting[0];
 	ep = &iface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(ep)) {
+	if (!ep || !usb_endpoint_is_int_in(ep)) {
 		rv = -EINVAL;
 		goto err;
 	}
-- 
GitLab


From 74bb35083d889c696a0f54be76ffe85a66dcbdc1 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 26 Mar 2009 17:36:57 -0700
Subject: [PATCH 0408/1421] USB: musb_host, minor enqueue locking fix (v2)

Someone noted that the enqueue path used an unlocked access
for usb_host_endpoint->hcpriv ... fix that, by being safe
and always accessing it under spinlock protection.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_host.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 499c431a6d6..ff095956ca9 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1841,7 +1841,7 @@ static int musb_urb_enqueue(
 	unsigned long			flags;
 	struct musb			*musb = hcd_to_musb(hcd);
 	struct usb_host_endpoint	*hep = urb->ep;
-	struct musb_qh			*qh = hep->hcpriv;
+	struct musb_qh			*qh;
 	struct usb_endpoint_descriptor	*epd = &hep->desc;
 	int				ret;
 	unsigned			type_reg;
@@ -1853,22 +1853,21 @@ static int musb_urb_enqueue(
 
 	spin_lock_irqsave(&musb->lock, flags);
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	qh = ret ? NULL : hep->hcpriv;
+	if (qh)
+		urb->hcpriv = qh;
 	spin_unlock_irqrestore(&musb->lock, flags);
-	if (ret)
-		return ret;
 
 	/* DMA mapping was already done, if needed, and this urb is on
-	 * hep->urb_list ... so there's little to do unless hep wasn't
-	 * yet scheduled onto a live qh.
+	 * hep->urb_list now ... so we're done, unless hep wasn't yet
+	 * scheduled onto a live qh.
 	 *
 	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
 	 * disabled, testing for empty qh->ring and avoiding qh setup costs
 	 * except for the first urb queued after a config change.
 	 */
-	if (qh) {
-		urb->hcpriv = qh;
-		return 0;
-	}
+	if (qh || ret)
+		return ret;
 
 	/* Allocate and initialize qh, minimizing the work done each time
 	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
-- 
GitLab


From e4813eec8d47c8299d968bd5349dc881fa481c26 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 24 Mar 2009 10:39:13 -0400
Subject: [PATCH 0409/1421] USB: usb-storage: augment unusual_devs entry for
 Simple Tech/Datafab

This patch (as1227) adds the MAX_SECTORS_64 flag to the unusual_devs
entry for the Simple Tech/Datafab controller.  This fixes Bugzilla
#12882.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: binbin <binbinsh@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6ff2b283edb..96db479d116 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -975,12 +975,14 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 		"Simple Tech/Datafab",
 		"CF+SM Reader",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_RESIDUE ),
+		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
 
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
-- 
GitLab


From 78322c1a64387673f46afb8b5e31edec94e9603d Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 26 Mar 2009 17:38:30 -0700
Subject: [PATCH 0410/1421] USB: musb_host, fix ep0 fifo flushing

The MUSB host side can't share generic TX FIFO flush logic
with EP0; the EP0 TX status register bits are different
from those for other entpoints.

Resolve this issue by providing a new EP0-specific routine
to flush and reset the FIFO, which pays careful attention to
restrictions listed in the latest programmer's guide.  This
gets rid of an open issue whereby the usbtest control write
test (#14) failed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_host.c | 43 ++++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ff095956ca9..521fd83f5b9 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -125,6 +125,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
 	}
 }
 
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 5;
+
+	/* scrub any data left in the fifo */
+	do {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+			break;
+		musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		udelay(10);
+	} while (--retries);
+
+	WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+			ep->epnum, csr);
+
+	/* and reset for the next transfer */
+	musb_writew(epio, MUSB_TXCSR, 0);
+}
+
 /*
  * Start transmit. Caller is responsible for locking shared resources.
  * musb must be locked.
@@ -694,10 +717,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 			csr = musb_readw(epio, MUSB_TXCSR);
 		} else {
 			/* endpoint 0: just flush */
-			musb_writew(epio, MUSB_CSR0,
-				csr | MUSB_CSR0_FLUSHFIFO);
-			musb_writew(epio, MUSB_CSR0,
-				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_h_ep0_flush_fifo(hw_ep);
 		}
 
 		/* target addr and (for multipoint) hub addr/port */
@@ -1063,11 +1083,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
 			musb_writew(epio, MUSB_CSR0, csr);
 		} else {
-			csr |= MUSB_CSR0_FLUSHFIFO;
-			musb_writew(epio, MUSB_CSR0, csr);
-			musb_writew(epio, MUSB_CSR0, csr);
-			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
-			musb_writew(epio, MUSB_CSR0, csr);
+			musb_h_ep0_flush_fifo(hw_ep);
 		}
 
 		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
@@ -1081,10 +1097,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 		 * SHOULD NEVER HAPPEN! */
 		ERR("no URB for end 0\n");
 
-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
-		musb_writew(epio, MUSB_CSR0, 0);
-
+		musb_h_ep0_flush_fifo(hw_ep);
 		goto done;
 	}
 
@@ -2043,7 +2056,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
 		 * endpoint's irq status here to avoid bogus irqs.
 		 * clearing that status is platform-specific...
 		 */
-	} else {
+	} else if (ep->epnum) {
 		musb_h_tx_flush_fifo(ep);
 		csr = musb_readw(epio, MUSB_TXCSR);
 		csr &= ~(MUSB_TXCSR_AUTOSET
@@ -2057,6 +2070,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
 		musb_writew(epio, MUSB_TXCSR, csr);
 		/* flush cpu writebuffer */
 		csr = musb_readw(epio, MUSB_TXCSR);
+	} else  {
+		musb_h_ep0_flush_fifo(ep);
 	}
 	if (status == 0)
 		musb_advance_schedule(ep->musb, urb, ep, is_in);
-- 
GitLab


From c7bbc056a92476b3b3d70a8df7cc746ac5d56de7 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 26 Mar 2009 18:26:40 -0700
Subject: [PATCH 0411/1421] USB: musb: bugfixes for multi-packet TXDMA support

We really want to use DMA mode 1 for all multi-packet transfers;
that's one IRQ on DMA completion, instead of one per packet.

There is an important issue with such transfers, especially on
the host side:  when such transfers end with a full-size packet,
we must defer musb_dma_completion() calls until the FIFO empties.
Else we report URB completions too soon, and may clobber data in
the FIFO fifo when writing the next packet (losing data).

The Inventra DMA support uses DMA mode 1, but it ignores that
issue.  The CPPI DMA support uses mode 0, but doesn't handle
its TXPKTRDY interrupts quite right either; it can get stale
"packet ready" interrupts, and report transfer completion too
early using slightly different code paths, also losing data.

So I'm solving it in a generic way -- by adding a sort of the
"interrupt filter" into musb_host_tx(), catching these cases
where a DMA completion IRQ doesn't suffice and removing some
needlessly controller-specific logic.  When a TXDMA interrupt
happens and DMA request mode 1 is active, that filter resets
to mode 0 and defers URB completion processing until TXPKTRDY,
unless the FIFO is already empty.  Related filtering logic in
Inventra and CPPI code gets removed.

Since it should be competely safe now to use the DMA request
mode 1 for host side transfers with the CPPI DMA controller,
set it in musb_h_tx_dma_start() ... now renamed (and shared).

[ dbrownell@users.sourceforge.net: don't introduce more
CamElCase; use more concise explanations ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/cppi_dma.c  | 22 +-----------
 drivers/usb/musb/musb_host.c | 68 ++++++++++++++++++++++++++++++++++--
 drivers/usb/musb/musbhsdma.c |  7 ++--
 3 files changed, 69 insertions(+), 28 deletions(-)

diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 569ef0fed0f..30e24891ed6 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1228,27 +1228,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
 
 				hw_ep = tx_ch->hw_ep;
 
-				/* Peripheral role never repurposes the
-				 * endpoint, so immediate completion is
-				 * safe.  Host role waits for the fifo
-				 * to empty (TXPKTRDY irq) before going
-				 * to the next queued bulk transfer.
-				 */
-				if (is_host_active(cppi->musb)) {
-#if 0
-					/* WORKAROUND because we may
-					 * not always get TXKPTRDY ...
-					 */
-					int	csr;
-
-					csr = musb_readw(hw_ep->regs,
-						MUSB_TXCSR);
-					if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
-						completed = false;
-				}
-				if (completed)
-					musb_dma_completion(musb, index + 1, 1);
+				musb_dma_completion(musb, index + 1, 1);
 
 			} else {
 				/* Bigger transfer than we could fit in
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 521fd83f5b9..518abfca124 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -4,6 +4,7 @@
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -168,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep)
 
 }
 
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
 {
 	u16	txcsr;
 
 	/* NOTE: no locks here; caller should lock and select EP */
 	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
 	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	if (is_cppi_enabled())
+		txcsr |= MUSB_TXCSR_DMAMODE;
 	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
 }
 
@@ -279,7 +282,7 @@ start:
 		if (!hw_ep->tx_channel)
 			musb_h_tx_start(hw_ep);
 		else if (is_cppi_enabled() || tusb_dma_omap())
-			cppi_host_txdma_start(hw_ep);
+			musb_h_tx_dma_start(hw_ep);
 	}
 }
 
@@ -1250,6 +1253,67 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 
 	}
 
+	if (is_dma_capable() && dma && !status) {
+		/*
+		 * DMA has completed.  But if we're using DMA mode 1 (multi
+		 * packet DMA), we need a terminal TXPKTRDY interrupt before
+		 * we can consider this transfer completed, lest we trash
+		 * its last packet when writing the next URB's data.  So we
+		 * switch back to mode 0 to get that interrupt; we'll come
+		 * back here once it happens.
+		 */
+		if (tx_csr & MUSB_TXCSR_DMAMODE) {
+			/*
+			 * We shouldn't clear DMAMODE with DMAENAB set; so
+			 * clear them in a safe order.  That should be OK
+			 * once TXPKTRDY has been set (and I've never seen
+			 * it being 0 at this moment -- DMA interrupt latency
+			 * is significant) but if it hasn't been then we have
+			 * no choice but to stop being polite and ignore the
+			 * programmer's guide... :-)
+			 *
+			 * Note that we must write TXCSR with TXPKTRDY cleared
+			 * in order not to re-trigger the packet send (this bit
+			 * can't be cleared by CPU), and there's another caveat:
+			 * TXPKTRDY may be set shortly and then cleared in the
+			 * double-buffered FIFO mode, so we do an extra TXCSR
+			 * read for debouncing...
+			 */
+			tx_csr &= musb_readw(epio, MUSB_TXCSR);
+			if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+				tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+					    MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR,
+					    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+			}
+			tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+				    MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR,
+				    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+			/*
+			 * There is no guarantee that we'll get an interrupt
+			 * after clearing DMAMODE as we might have done this
+			 * too late (after TXPKTRDY was cleared by controller).
+			 * Re-read TXCSR as we have spoiled its previous value.
+			 */
+			tx_csr = musb_readw(epio, MUSB_TXCSR);
+		}
+
+		/*
+		 * We may get here from a DMA completion or TXPKTRDY interrupt.
+		 * In any case, we must check the FIFO status here and bail out
+		 * only if the FIFO still has data -- that should prevent the
+		 * "missed" TXPKTRDY interrupts and deal with double-buffered
+		 * FIFO mode too...
+		 */
+		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+			DBG(2, "DMA complete but packet still in FIFO, "
+			    "CSR %04x\n", tx_csr);
+			return;
+		}
+	}
+
 	/* REVISIT this looks wrong... */
 	if (!status || dma || usb_pipeisoc(pipe)) {
 		if (dma)
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8662e9e159c..de0e2420367 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -304,12 +304,9 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 							musb_channel->epnum,
 							MUSB_TXCSR),
 						MUSB_TXCSR_TXPKTRDY);
-				} else {
-					musb_dma_completion(
-						musb,
-						musb_channel->epnum,
-						musb_channel->transmit);
 				}
+				musb_dma_completion(musb, musb_channel->epnum,
+						    musb_channel->transmit);
 			}
 		}
 	}
-- 
GitLab


From b6e434a5404b9ce8c285ea081b6ea5c523b29db4 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 26 Mar 2009 18:27:47 -0700
Subject: [PATCH 0412/1421] USB: musb: sanitize clearing TXCSR DMA bits (take
 2)

The MUSB code clears TXCSR_DMAMODE incorrectly in several
places, either asserting that TXCSR_DMAENAB is clear (when
sometimes it isn't) or clearing both bits together.  Recent
versions of the programmer's guide require DMAENAB to be
cleared first, although some older ones didn't.

Fix this and while at it:

 - In musb_gadget::txstate(), stop clearing the AUTOSET
   and DMAMODE bits for the CPPI case since they never
   get set anyway (the former bit is reserved on DaVinci);
   but do clear the DMAENAB bit on the DMA error path.

 - In musb_host::musb_ep_program(), remove the duplicate
   DMA controller specific code code clearing the TXCSR
   previous state, add the code to clear TXCSR DMA bits
   on the Inventra DMA error path, to replace such code
   (executed late) on the PIO path.

 - In musbhsdma::dma_channel_abort()/dma_controller_irq(),
   add/use the 'offset' variable to avoid MUSB_EP_OFFSET()
   invocations on every RXCSR/TXCSR access.

[dbrownell@users.sourceforge.net: don't introduce CamelCase,
shrink diff]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c | 33 +++++++++-----
 drivers/usb/musb/musb_host.c   | 79 ++++++++++++++--------------------
 drivers/usb/musb/musbhsdma.c   | 59 +++++++++++++++----------
 3 files changed, 90 insertions(+), 81 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c7ebd0867fc..f79440cdfe7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status)
 	if (is_dma_capable() && ep->dma) {
 		struct dma_controller	*c = ep->musb->dma_controller;
 		int value;
+
 		if (ep->is_in) {
+			/*
+			 * The programming guide says that we must not clear
+			 * the DMAMODE bit before DMAENAB, so we only
+			 * clear it in the second write...
+			 */
 			musb_writew(epio, MUSB_TXCSR,
-					0 | MUSB_TXCSR_FLUSHFIFO);
+				    MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
 			musb_writew(epio, MUSB_TXCSR,
 					0 | MUSB_TXCSR_FLUSHFIFO);
 		} else {
@@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
 		  |	IN token(s) are recd from Host.
 		  |		-> DMA interrupt on completion
 		  |		   calls TxAvail.
-		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> stop DMA, ~DMAENAB,
 		  |		      -> set TxPktRdy for last short pkt or zlp
 		  |		      -> Complete Request
 		  |		      -> Continue next request (call txstate)
@@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req)
 					request->dma, request_size);
 			if (use_dma) {
 				if (musb_ep->dma->desired_mode == 0) {
-					/* ASSERT: DMAENAB is clear */
-					csr &= ~(MUSB_TXCSR_AUTOSET |
-							MUSB_TXCSR_DMAMODE);
+					/*
+					 * We must not clear the DMAMODE bit
+					 * before the DMAENAB bit -- and the
+					 * latter doesn't always get cleared
+					 * before we get here...
+					 */
+					csr &= ~(MUSB_TXCSR_AUTOSET
+						| MUSB_TXCSR_DMAENAB);
+					musb_writew(epio, MUSB_TXCSR, csr
+						| MUSB_TXCSR_P_WZC_BITS);
+					csr &= ~MUSB_TXCSR_DMAMODE;
 					csr |= (MUSB_TXCSR_DMAENAB |
 							MUSB_TXCSR_MODE);
 					/* against programming guide */
@@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 
 #elif defined(CONFIG_USB_TI_CPPI_DMA)
 		/* program endpoint CSR first, then setup DMA */
-		csr &= ~(MUSB_TXCSR_AUTOSET
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_P_UNDERRUN
-				| MUSB_TXCSR_TXPKTRDY);
+		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
 		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
 		musb_writew(epio, MUSB_TXCSR,
 			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
@@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
 		if (!use_dma) {
 			c->channel_release(musb_ep->dma);
 			musb_ep->dma = NULL;
-			/* ASSERT: DMAENAB clear */
-			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			csr &= ~MUSB_TXCSR_DMAENAB;
+			musb_writew(epio, MUSB_TXCSR, csr);
 			/* invariant: prequest->buf is non-null */
 		}
 #elif defined(CONFIG_USB_TUSB_OMAP_DMA)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 518abfca124..1dfaaa6acfa 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -593,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 		csr = musb_readw(ep->regs, MUSB_TXCSR);
 		if (csr & MUSB_TXCSR_MODE) {
 			musb_h_tx_flush_fifo(ep);
+			csr = musb_readw(ep->regs, MUSB_TXCSR);
 			musb_writew(ep->regs, MUSB_TXCSR,
-					MUSB_TXCSR_FRCDATATOG);
+				    csr | MUSB_TXCSR_FRCDATATOG);
 		}
-		/* clear mode (and everything else) to enable Rx */
+
+		/*
+		 * Clear the MODE bit (and everything else) to enable Rx.
+		 * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+		 */
+		if (csr & MUSB_TXCSR_DMAMODE)
+			musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
 		musb_writew(ep->regs, MUSB_TXCSR, 0);
 
 	/* scrub all previous state, clearing toggle */
@@ -693,12 +700,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 
 		/* general endpoint setup */
 		if (epnum) {
-			/* ASSERT:  TXCSR_DMAENAB was already cleared */
-
 			/* flush all old state, set default */
 			musb_h_tx_flush_fifo(hw_ep);
+
+			/*
+			 * We must not clear the DMAMODE bit before or in
+			 * the same cycle with the DMAENAB bit, so we clear
+			 * the latter first...
+			 */
 			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
-					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
 					| MUSB_TXCSR_FRCDATATOG
 					| MUSB_TXCSR_H_RXSTALL
 					| MUSB_TXCSR_H_ERROR
@@ -706,16 +718,15 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 					);
 			csr |= MUSB_TXCSR_MODE;
 
-			if (usb_gettoggle(urb->dev,
-					qh->epnum, 1))
+			if (usb_gettoggle(urb->dev, qh->epnum, 1))
 				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
 					| MUSB_TXCSR_H_DATATOGGLE;
 			else
 				csr |= MUSB_TXCSR_CLRDATATOG;
 
-			/* twice in case of double packet buffering */
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may need to clear FLUSHFIFO ... */
+			csr &= ~MUSB_TXCSR_DMAMODE;
 			musb_writew(epio, MUSB_TXCSR, csr);
 			csr = musb_readw(epio, MUSB_TXCSR);
 		} else {
@@ -759,34 +770,19 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 
 #ifdef CONFIG_USB_INVENTRA_DMA
 		if (dma_channel) {
-
-			/* clear previous state */
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_AUTOSET
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_DMAENAB);
-			csr |= MUSB_TXCSR_MODE;
-			musb_writew(epio, MUSB_TXCSR,
-				csr | MUSB_TXCSR_MODE);
-
 			qh->segsize = min(len, dma_channel->max_len);
-
 			if (qh->segsize <= packet_sz)
 				dma_channel->desired_mode = 0;
 			else
 				dma_channel->desired_mode = 1;
 
-
 			if (dma_channel->desired_mode == 0) {
-				csr &= ~(MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAMODE);
+				/* Against the programming guide */
 				csr |= (MUSB_TXCSR_DMAENAB);
-					/* against programming guide */
 			} else
 				csr |= (MUSB_TXCSR_AUTOSET
 					| MUSB_TXCSR_DMAENAB
 					| MUSB_TXCSR_DMAMODE);
-
 			musb_writew(epio, MUSB_TXCSR, csr);
 
 			dma_ok = dma_controller->channel_program(
@@ -803,6 +799,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 				else
 					hw_ep->rx_channel = NULL;
 				dma_channel = NULL;
+
+				/*
+				 * The programming guide says that we must
+				 * clear the DMAENAB bit before DMAMODE...
+				 */
+				csr = musb_readw(epio, MUSB_TXCSR);
+				csr &= ~(MUSB_TXCSR_DMAENAB
+						| MUSB_TXCSR_AUTOSET);
+				musb_writew(epio, MUSB_TXCSR, csr);
+				csr &= ~MUSB_TXCSR_DMAMODE;
+				musb_writew(epio, MUSB_TXCSR, csr);
 			}
 		}
 #endif
@@ -810,18 +817,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* candidate for DMA */
 		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
 
-			/* program endpoint CSRs first, then setup DMA.
-			 * assume CPPI setup succeeds.
-			 * defer enabling dma.
-			 */
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAMODE
-					| MUSB_TXCSR_DMAENAB);
-			csr |= MUSB_TXCSR_MODE;
-			musb_writew(epio, MUSB_TXCSR,
-				csr | MUSB_TXCSR_MODE);
-
+			/* Defer enabling DMA */
 			dma_channel->actual_len = 0L;
 			qh->segsize = len;
 
@@ -850,20 +846,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		}
 
 		if (load_count) {
-			/* ASSERT:  TXCSR_DMAENAB was already cleared */
-
 			/* PIO to load FIFO */
 			qh->segsize = load_count;
 			musb_write_fifo(hw_ep, load_count, buf);
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_DMAENAB
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_AUTOSET);
-			/* write CSR */
-			csr |= MUSB_TXCSR_MODE;
-
-			if (epnum)
-				musb_writew(epio, MUSB_TXCSR, csr);
 		}
 
 		/* re-enable interrupt */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index de0e2420367..5e83f96d6b7 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel)
 	void __iomem *mbase = musb_channel->controller->base;
 
 	u8 bchannel = musb_channel->idx;
+	int offset;
 	u16 csr;
 
 	if (channel->status == MUSB_DMA_STATUS_BUSY) {
 		if (musb_channel->transmit) {
-
-			csr = musb_readw(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum,
-						MUSB_TXCSR));
-			csr &= ~(MUSB_TXCSR_AUTOSET |
-				 MUSB_TXCSR_DMAENAB |
-				 MUSB_TXCSR_DMAMODE);
-			musb_writew(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
-				csr);
+			offset = MUSB_EP_OFFSET(musb_channel->epnum,
+						MUSB_TXCSR);
+
+			/*
+			 * The programming guide says that we must clear
+			 * the DMAENAB bit before the DMAMODE bit...
+			 */
+			csr = musb_readw(mbase, offset);
+			csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+			musb_writew(mbase, offset, csr);
+			csr &= ~MUSB_TXCSR_DMAMODE;
+			musb_writew(mbase, offset, csr);
 		} else {
-			csr = musb_readw(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum,
-						MUSB_RXCSR));
+			offset = MUSB_EP_OFFSET(musb_channel->epnum,
+						MUSB_RXCSR);
+
+			csr = musb_readw(mbase, offset);
 			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
 				 MUSB_RXCSR_DMAENAB |
 				 MUSB_RXCSR_DMAMODE);
-			musb_writew(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
-				csr);
+			musb_writew(mbase, offset, csr);
 		}
 
 		musb_writew(mbase,
@@ -296,14 +298,25 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
 					&& ((channel->desired_mode == 0)
 					    || (channel->actual_len &
 					    (musb_channel->max_packet_sz - 1)))
-					 ) {
+				    ) {
+					u8  epnum  = musb_channel->epnum;
+					int offset = MUSB_EP_OFFSET(epnum,
+								    MUSB_TXCSR);
+					u16 txcsr;
+
+					/*
+					 * The programming guide says that we
+					 * must clear DMAENAB before DMAMODE.
+					 */
+					musb_ep_select(mbase, epnum);
+					txcsr = musb_readw(mbase, offset);
+					txcsr &= ~(MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_AUTOSET);
+					musb_writew(mbase, offset, txcsr);
 					/* Send out the packet */
-					musb_ep_select(mbase,
-						musb_channel->epnum);
-					musb_writew(mbase, MUSB_EP_OFFSET(
-							musb_channel->epnum,
-							MUSB_TXCSR),
-						MUSB_TXCSR_TXPKTRDY);
+					txcsr &= ~MUSB_TXCSR_DMAMODE;
+					txcsr |=  MUSB_TXCSR_TXPKTRDY;
+					musb_writew(mbase, offset, txcsr);
 				}
 				musb_dma_completion(musb, musb_channel->epnum,
 						    musb_channel->transmit);
-- 
GitLab


From 6b6e97107f12f3a9f7b5b43a6c3b94409240bcff Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 26 Mar 2009 18:29:19 -0700
Subject: [PATCH 0413/1421] USB: musb: fix isochronous TXDMA (take 2)

Multi-frame isochronous TX URBs transfers in DMA mode never
complete with CPPI DMA because musb_host_tx() doesn't restart
DMA on the second frame, only emitting a debug message.
With Inventra DMA they complete, but in PIO mode.  To fix:

 - Factor out programming of the DMA transfer from
   musb_ep_program() into musb_tx_dma_program();

 - Reorder the code at the end of musb_host_tx() to
   facilitate the fallback to PIO iff DMA fails;

 - Handle the buffer offset consistently for both
   PIO and DMA modes;

 - Add an argument to musb_ep_program() for the same
   reason (it only worked correctly with non-zero
   offset of the first frame in PIO mode);

 - Set the completed isochronous frame descriptor's
   'actual_length' and 'status' fields correctly in
   DMA mode.

Also, since CPPI reportedly doesn't like sending isochronous
packets in the RNDIS mode, change the criterion for this
mode to be used only for multi-packet transfers.  (There's
no need for that mode in the single-packet case anyway.)

[ dbrownell@users.sourceforge.net: split comment paragraph
into bullet list, shrink patch delta, style tweaks ]

Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/cppi_dma.c  |   1 +
 drivers/usb/musb/musb_host.c | 227 ++++++++++++++++-------------------
 2 files changed, 105 insertions(+), 123 deletions(-)

diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 30e24891ed6..1976e9b4180 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 	 * trigger the "send a ZLP?" confusion.
 	 */
 	rndis = (maxpacket & 0x3f) == 0
+		&& length > maxpacket
 		&& length < 0xffff
 		&& (length % maxpacket) != 0;
 
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 1dfaaa6acfa..db1b57415ec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -97,8 +97,8 @@
 
 
 static void musb_ep_program(struct musb *musb, u8 epnum,
-			struct urb *urb, unsigned int nOut,
-			u8 *buf, u32 len);
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len);
 
 /*
  * Clear TX fifo. Needed to avoid BABBLE errors.
@@ -192,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 {
 	u16			frame;
 	u32			len;
-	void			*buf;
 	void __iomem		*mbase =  musb->mregs;
 	struct urb		*urb = next_urb(qh);
+	void			*buf = urb->transfer_buffer;
+	u32			offset = 0;
 	struct musb_hw_ep	*hw_ep = qh->hw_ep;
 	unsigned		pipe = urb->pipe;
 	u8			address = usb_pipedevice(pipe);
@@ -217,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	case USB_ENDPOINT_XFER_ISOC:
 		qh->iso_idx = 0;
 		qh->frame = 0;
-		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		offset = urb->iso_frame_desc[0].offset;
 		len = urb->iso_frame_desc[0].length;
 		break;
 	default:		/* bulk, interrupt */
@@ -235,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
 			default:			s = "-intr"; break;
 			}; s; }),
-			epnum, buf, len);
+			epnum, buf + offset, len);
 
 	/* Configure endpoint */
 	if (is_in || hw_ep->is_shared_fifo)
 		hw_ep->in_qh = qh;
 	else
 		hw_ep->out_qh = qh;
-	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+	musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
 
 	/* transmit may have more work: start it when it is time */
 	if (is_in)
@@ -253,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
 		DBG(3, "check whether there's still time for periodic Tx\n");
-		qh->iso_idx = 0;
 		frame = musb_readw(mbase, MUSB_FRAME);
 		/* FIXME this doesn't implement that scheduling policy ...
 		 * or handle framecounter wrapping
@@ -634,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	ep->rx_reinit = 0;
 }
 
+static bool musb_tx_dma_program(struct dma_controller *dma,
+		struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+		struct urb *urb, u32 offset, u32 length)
+{
+	struct dma_channel	*channel = hw_ep->tx_channel;
+	void __iomem		*epio = hw_ep->regs;
+	u16			pkt_size = qh->maxpacket;
+	u16			csr;
+	u8			mode;
+
+#ifdef	CONFIG_USB_INVENTRA_DMA
+	if (length > channel->max_len)
+		length = channel->max_len;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	if (length > pkt_size) {
+		mode = 1;
+		csr |= MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAMODE
+			| MUSB_TXCSR_DMAENAB;
+	} else {
+		mode = 0;
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+	}
+	channel->desired_mode = mode;
+	musb_writew(epio, MUSB_TXCSR, csr);
+#else
+	if (!is_cppi_enabled() && !tusb_dma_omap())
+		return false;
+
+	channel->actual_len = 0;
+
+	/*
+	 * TX uses "RNDIS" mode automatically but needs help
+	 * to identify the zero-length-final-packet case.
+	 */
+	mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+	qh->segsize = length;
+
+	if (!dma->channel_program(channel, pkt_size, mode,
+			urb->transfer_dma + offset, length)) {
+		dma->channel_release(channel);
+		hw_ep->tx_channel = NULL;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+		musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+		return false;
+	}
+	return true;
+}
 
 /*
  * Program an HDRC endpoint as per the given URB
  * Context: irqs blocked, controller lock held
  */
 static void musb_ep_program(struct musb *musb, u8 epnum,
-			struct urb *urb, unsigned int is_out,
-			u8 *buf, u32 len)
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len)
 {
 	struct dma_controller	*dma_controller;
 	struct dma_channel	*dma_channel;
@@ -768,82 +822,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		else
 			load_count = min((u32) packet_sz, len);
 
-#ifdef CONFIG_USB_INVENTRA_DMA
-		if (dma_channel) {
-			qh->segsize = min(len, dma_channel->max_len);
-			if (qh->segsize <= packet_sz)
-				dma_channel->desired_mode = 0;
-			else
-				dma_channel->desired_mode = 1;
-
-			if (dma_channel->desired_mode == 0) {
-				/* Against the programming guide */
-				csr |= (MUSB_TXCSR_DMAENAB);
-			} else
-				csr |= (MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAENAB
-					| MUSB_TXCSR_DMAMODE);
-			musb_writew(epio, MUSB_TXCSR, csr);
-
-			dma_ok = dma_controller->channel_program(
-					dma_channel, packet_sz,
-					dma_channel->desired_mode,
-					urb->transfer_dma,
-					qh->segsize);
-			if (dma_ok) {
-				load_count = 0;
-			} else {
-				dma_controller->channel_release(dma_channel);
-				if (is_out)
-					hw_ep->tx_channel = NULL;
-				else
-					hw_ep->rx_channel = NULL;
-				dma_channel = NULL;
-
-				/*
-				 * The programming guide says that we must
-				 * clear the DMAENAB bit before DMAMODE...
-				 */
-				csr = musb_readw(epio, MUSB_TXCSR);
-				csr &= ~(MUSB_TXCSR_DMAENAB
-						| MUSB_TXCSR_AUTOSET);
-				musb_writew(epio, MUSB_TXCSR, csr);
-				csr &= ~MUSB_TXCSR_DMAMODE;
-				musb_writew(epio, MUSB_TXCSR, csr);
-			}
-		}
-#endif
-
-		/* candidate for DMA */
-		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
-			/* Defer enabling DMA */
-			dma_channel->actual_len = 0L;
-			qh->segsize = len;
-
-			/* TX uses "rndis" mode automatically, but needs help
-			 * to identify the zero-length-final-packet case.
-			 */
-			dma_ok = dma_controller->channel_program(
-					dma_channel, packet_sz,
-					(urb->transfer_flags
-							& URB_ZERO_PACKET)
-						== URB_ZERO_PACKET,
-					urb->transfer_dma,
-					qh->segsize);
-			if (dma_ok) {
-				load_count = 0;
-			} else {
-				dma_controller->channel_release(dma_channel);
-				hw_ep->tx_channel = NULL;
-				dma_channel = NULL;
-
-				/* REVISIT there's an error path here that
-				 * needs handling:  can't do dma, but
-				 * there's no pio buffer address...
-				 */
-			}
-		}
+		if (dma_channel && musb_tx_dma_program(dma_controller,
+					hw_ep, qh, urb, offset, len))
+			load_count = 0;
 
 		if (load_count) {
 			/* PIO to load FIFO */
@@ -903,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 						dma_channel, packet_sz,
 						!(urb->transfer_flags
 							& URB_SHORT_NOT_OK),
-						urb->transfer_dma,
+						urb->transfer_dma + offset,
 						qh->segsize);
 				if (!dma_ok) {
 					dma_controller->channel_release(
@@ -1146,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	int			pipe;
 	bool			done = false;
 	u16			tx_csr;
-	size_t			wLength = 0;
-	u8			*buf = NULL;
+	size_t			length = 0;
+	size_t			offset = 0;
 	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
@@ -1165,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	/* with CPPI, DMA sometimes triggers "extra" irqs */
 	if (!urb) {
 		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
-		goto finish;
+		return;
 	}
 
 	pipe = urb->pipe;
@@ -1202,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		musb_writew(epio, MUSB_TXCSR,
 				MUSB_TXCSR_H_WZC_BITS
 				| MUSB_TXCSR_TXPKTRDY);
-		goto finish;
+		return;
 	}
 
 	if (status) {
@@ -1234,8 +1215,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	/* second cppi case */
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
-		goto finish;
-
+		return;
 	}
 
 	if (is_dma_capable() && dma && !status) {
@@ -1299,25 +1279,25 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		}
 	}
 
-	/* REVISIT this looks wrong... */
 	if (!status || dma || usb_pipeisoc(pipe)) {
 		if (dma)
-			wLength = dma->actual_len;
+			length = dma->actual_len;
 		else
-			wLength = qh->segsize;
-		qh->offset += wLength;
+			length = qh->segsize;
+		qh->offset += length;
 
 		if (usb_pipeisoc(pipe)) {
 			struct usb_iso_packet_descriptor	*d;
 
 			d = urb->iso_frame_desc + qh->iso_idx;
-			d->actual_length = qh->segsize;
+			d->actual_length = length;
+			d->status = status;
 			if (++qh->iso_idx >= urb->number_of_packets) {
 				done = true;
 			} else {
 				d++;
-				buf = urb->transfer_buffer + d->offset;
-				wLength = d->length;
+				offset = d->offset;
+				length = d->length;
 			}
 		} else if (dma) {
 			done = true;
@@ -1330,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 						& URB_ZERO_PACKET))
 				done = true;
 			if (!done) {
-				buf = urb->transfer_buffer
-						+ qh->offset;
-				wLength = urb->transfer_buffer_length
-						- qh->offset;
+				offset = qh->offset;
+				length = urb->transfer_buffer_length - offset;
 			}
 		}
 	}
@@ -1352,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		urb->status = status;
 		urb->actual_length = qh->offset;
 		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+		return;
+	} else	if (usb_pipeisoc(pipe) && dma) {
+		if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+				offset, length))
+			return;
+	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
+		DBG(1, "not complete, but DMA enabled?\n");
+		return;
+	}
 
-	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
-		/* WARN_ON(!buf); */
-
-		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
-		 * (and presumably, fifo is not half-full) we should write TWO
-		 * packets before updating TXCSR ... other docs disagree ...
-		 */
-		/* PIO:  start next packet in this URB */
-		if (wLength > qh->maxpacket)
-			wLength = qh->maxpacket;
-		musb_write_fifo(hw_ep, wLength, buf);
-		qh->segsize = wLength;
-
-		musb_ep_select(mbase, epnum);
-		musb_writew(epio, MUSB_TXCSR,
-				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-	} else
-		DBG(1, "not complete, but dma enabled?\n");
+	/*
+	 * PIO: start next packet in this URB.
+	 *
+	 * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+	 * (and presumably, FIFO is not half-full) we should write *two*
+	 * packets before updating TXCSR; other docs disagree...
+	 */
+	if (length > qh->maxpacket)
+		length = qh->maxpacket;
+	musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+	qh->segsize = length;
 
-finish:
-	return;
+	musb_ep_select(mbase, epnum);
+	musb_writew(epio, MUSB_TXCSR,
+			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
 }
 
 
-- 
GitLab


From 0ec8fd70fbd7327e1bf747c4a2f6b67efdf16618 Mon Sep 17 00:00:00 2001
From: Kim Kyuwon <q1.kim@samsung.com>
Date: Thu, 26 Mar 2009 18:56:51 -0700
Subject: [PATCH 0414/1421] USB: musb: fix possible panic while resuming

During driver resume processing, musb could cause a kernel panic.
Fix by enabling the clock earlier, with the resume_early method.

Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_core.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 338cd1611ab..0112353ec97 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2170,26 +2170,22 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message)
 	return 0;
 }
 
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
 {
-	unsigned long	flags;
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
 	if (!musb->clock)
 		return 0;
 
-	spin_lock_irqsave(&musb->lock, flags);
-
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 1);
 	else
 		clk_enable(musb->clock);
 
 	/* for static cmos like DaVinci, register values were preserved
-	 * unless for some reason the whole soc powered down and we're
-	 * not treating that as a whole-system restart (e.g. swsusp)
+	 * unless for some reason the whole soc powered down or the USB
+	 * module got reset through the PSC (vs just being disabled).
 	 */
-	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
 
@@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = {
 	.remove		= __devexit_p(musb_remove),
 	.shutdown	= musb_shutdown,
 	.suspend	= musb_suspend,
-	.resume		= musb_resume,
+	.resume_early	= musb_resume_early,
 };
 
 /*-------------------------------------------------------------------------*/
-- 
GitLab


From c7877e1983f051cc267e1ec8c232a02d23c0a82a Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 7 Apr 2009 11:56:32 -0700
Subject: [PATCH 0415/1421] Revert USB: usb-serial ch341: support for
 DTR/RTS/CTS

Reverts commit 664d5df92e88b6ef091048a802b3750f4e989180 as the commit
log information was not complete, and we didn't have a proper
signed-off-by by the author of the original BSD code.

Cc: Werner Cornelius <Werner.Cornelius@cornelius-consult.de>
Cc: Boris Hajduk <boris@hajduk.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ch341.c | 374 +++++++------------------------------
 1 file changed, 72 insertions(+), 302 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ab4cc277aa6..d33d39d9b7e 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -1,7 +1,5 @@
 /*
  * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
- * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
- * Copyright 2009, Boris Hajduk <boris@hajduk.org>
  *
  * ch341.c implements a serial port driver for the Winchiphead CH341.
  *
@@ -23,39 +21,9 @@
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 
-#define DEFAULT_BAUD_RATE 9600
+#define DEFAULT_BAUD_RATE 2400
 #define DEFAULT_TIMEOUT   1000
 
-/* flags for IO-Bits */
-#define CH341_BIT_RTS (1 << 6)
-#define CH341_BIT_DTR (1 << 5)
-
-/******************************/
-/* interrupt pipe definitions */
-/******************************/
-/* always 4 interrupt bytes */
-/* first irq byte normally 0x08 */
-/* second irq byte base 0x7d + below */
-/* third irq byte base 0x94 + below */
-/* fourth irq byte normally 0xee */
-
-/* second interrupt byte */
-#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
-
-/* status returned in third interrupt answer byte, inverted in data
-   from irq */
-#define CH341_BIT_CTS 0x01
-#define CH341_BIT_DSR 0x02
-#define CH341_BIT_RI  0x04
-#define CH341_BIT_DCD 0x08
-#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
-
-/*******************************/
-/* baudrate calculation factor */
-/*******************************/
-#define CH341_BAUDBASE_FACTOR 1532620800
-#define CH341_BAUDBASE_DIVMAX 3
-
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -66,12 +34,9 @@ static struct usb_device_id id_table [] = {
 MODULE_DEVICE_TABLE(usb, id_table);
 
 struct ch341_private {
-	spinlock_t lock; /* access lock */
-	wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
-	unsigned baud_rate; /* set baud rate */
-	u8 line_control; /* set line control value RTS/DTR */
-	u8 line_status; /* active status of modem control inputs */
-	u8 multi_status_change; /* status changed multiple since last call */
+	unsigned baud_rate;
+	u8 dtr;
+	u8 rts;
 };
 
 static int ch341_control_out(struct usb_device *dev, u8 request,
@@ -107,28 +72,37 @@ static int ch341_set_baudrate(struct usb_device *dev,
 {
 	short a, b;
 	int r;
-	unsigned long factor;
-	short divisor;
 
 	dbg("ch341_set_baudrate(%d)", priv->baud_rate);
-
-	if (!priv->baud_rate)
+	switch (priv->baud_rate) {
+	case 2400:
+		a = 0xd901;
+		b = 0x0038;
+		break;
+	case 4800:
+		a = 0x6402;
+		b = 0x001f;
+		break;
+	case 9600:
+		a = 0xb202;
+		b = 0x0013;
+		break;
+	case 19200:
+		a = 0xd902;
+		b = 0x000d;
+		break;
+	case 38400:
+		a = 0x6403;
+		b = 0x000a;
+		break;
+	case 115200:
+		a = 0xcc03;
+		b = 0x0008;
+		break;
+	default:
 		return -EINVAL;
-	factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
-	divisor = CH341_BAUDBASE_DIVMAX;
-
-	while ((factor > 0xfff0) && divisor) {
-		factor >>= 3;
-		divisor--;
 	}
 
-	if (factor > 0xfff0)
-		return -EINVAL;
-
-	factor = 0x10000 - factor;
-	a = (factor & 0xff00) | divisor;
-	b = factor & 0xff;
-
 	r = ch341_control_out(dev, 0x9a, 0x1312, a);
 	if (!r)
 		r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
@@ -136,18 +110,19 @@ static int ch341_set_baudrate(struct usb_device *dev,
 	return r;
 }
 
-static int ch341_set_handshake(struct usb_device *dev, u8 control)
+static int ch341_set_handshake(struct usb_device *dev,
+			       struct ch341_private *priv)
 {
-	dbg("ch341_set_handshake(0x%02x)", control);
-	return ch341_control_out(dev, 0xa4, ~control, 0);
+	dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
+	return ch341_control_out(dev, 0xa4,
+		~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
 }
 
-static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
+static int ch341_get_status(struct usb_device *dev)
 {
 	char *buffer;
 	int r;
 	const unsigned size = 8;
-	unsigned long flags;
 
 	dbg("ch341_get_status()");
 
@@ -159,15 +134,10 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	/* setup the private status if available */
-	if (r == 2) {
-		r = 0;
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
-		priv->multi_status_change = 0;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	} else
-		r = -EPROTO;
+	/* Not having the datasheet for the CH341, we ignore the bytes returned
+	 * from the device. Return error if the device did not respond in time.
+	 */
+	r = 0;
 
 out:	kfree(buffer);
 	return r;
@@ -210,7 +180,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 		goto out;
 
 	/* expect 0xff 0xee */
-	r = ch341_get_status(dev, priv);
+	r = ch341_get_status(dev);
 	if (r < 0)
 		goto out;
 
@@ -222,12 +192,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	r = ch341_set_handshake(dev, priv->line_control);
+	r = ch341_set_handshake(dev, priv);
 	if (r < 0)
 		goto out;
 
 	/* expect 0x9f 0xee */
-	r = ch341_get_status(dev, priv);
+	r = ch341_get_status(dev);
 
 out:	kfree(buffer);
 	return r;
@@ -246,10 +216,9 @@ static int ch341_attach(struct usb_serial *serial)
 	if (!priv)
 		return -ENOMEM;
 
-	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
+	priv->dtr = 1;
+	priv->rts = 1;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r < 0)
@@ -262,35 +231,6 @@ error:	kfree(priv);
 	return r;
 }
 
-static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
-{
-	struct ch341_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	unsigned int c_cflag;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->interrupt_in_urb);
-
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			ch341_set_handshake(port->serial->dev, 0);
-		}
-	}
-	wake_up_interruptible(&priv->delta_msr_wait);
-}
-
-
 /* open this device, set default parameters */
 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
@@ -302,13 +242,14 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("ch341_open()");
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
+	priv->dtr = 1;
+	priv->rts = 1;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
 		goto out;
 
-	r = ch341_set_handshake(serial->dev, priv->line_control);
+	r = ch341_set_handshake(serial->dev, priv);
 	if (r)
 		goto out;
 
@@ -316,16 +257,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (r)
 		goto out;
 
-	dbg("%s - submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = serial->dev;
-	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-	if (r) {
-		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
-			" error %d\n", __func__, r);
-		ch341_close(tty, port, NULL);
-		return -EPROTO;
-	}
-
 	r = usb_serial_generic_open(tty, port, filp);
 
 out:	return r;
@@ -339,194 +270,38 @@ static void ch341_set_termios(struct tty_struct *tty,
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned baud_rate;
-	unsigned long flags;
 
 	dbg("ch341_set_termios()");
 
-	if (!tty || !tty->termios)
-		return;
-
 	baud_rate = tty_get_baud_rate(tty);
 
-	priv->baud_rate = baud_rate;
-
-	if (baud_rate) {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		ch341_set_baudrate(port->serial->dev, priv);
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
+	switch (baud_rate) {
+	case 2400:
+	case 4800:
+	case 9600:
+	case 19200:
+	case 38400:
+	case 115200:
+		priv->baud_rate = baud_rate;
+		break;
+	default:
+		dbg("Rate %d not supported, using %d",
+			baud_rate, DEFAULT_BAUD_RATE);
+		priv->baud_rate = DEFAULT_BAUD_RATE;
 	}
 
-	ch341_set_handshake(port->serial->dev, priv->line_control);
+	ch341_set_baudrate(port->serial->dev, priv);
 
 	/* Unimplemented:
 	 * (cflag & CSIZE) : data bits [5, 8]
 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 	 * (cflag & CSTOPB) : stop bits [1, 2]
 	 */
-}
-
-static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
-			  unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ch341_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	u8 control;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (set & TIOCM_RTS)
-		priv->line_control |= CH341_BIT_RTS;
-	if (set & TIOCM_DTR)
-		priv->line_control |= CH341_BIT_DTR;
-	if (clear & TIOCM_RTS)
-		priv->line_control &= ~CH341_BIT_RTS;
-	if (clear & TIOCM_DTR)
-		priv->line_control &= ~CH341_BIT_DTR;
-	control = priv->line_control;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return ch341_set_handshake(port->serial->dev, control);
-}
-
-static void ch341_read_int_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
-	unsigned char *data = urb->transfer_buffer;
-	unsigned int actual_length = urb->actual_length;
-	int status;
-
-	dbg("%s (%d)", __func__, port->number);
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-			      urb->actual_length, urb->transfer_buffer);
-
-	if (actual_length >= 4) {
-		struct ch341_private *priv = usb_get_serial_port_data(port);
-		unsigned long flags;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
-		if ((data[1] & CH341_MULT_STAT))
-			priv->multi_status_change = 1;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		wake_up_interruptible(&priv->delta_msr_wait);
-	}
-
-exit:
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status)
-		dev_err(&urb->dev->dev,
-			"%s - usb_submit_urb failed with result %d\n",
-			__func__, status);
-}
-
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
-{
-	struct ch341_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	u8 prevstatus;
-	u8 status;
-	u8 changed;
-	u8 multi_change = 0;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	prevstatus = priv->line_status;
-	priv->multi_status_change = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	while (!multi_change) {
-		interruptible_sleep_on(&priv->delta_msr_wait);
-		/* see if a signal did it */
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		status = priv->line_status;
-		multi_change = priv->multi_status_change;
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		changed = prevstatus ^ status;
-
-		if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
-		    ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
-		    ((arg & TIOCM_CD)  && (changed & CH341_BIT_DCD)) ||
-		    ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
-			return 0;
-		}
-		prevstatus = status;
-	}
-
-	return 0;
-}
-
-/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
-static int ch341_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
-		return wait_modem_info(port, arg);
-
-	default:
-		dbg("%s not supported = 0x%04x", __func__, cmd);
-		break;
-	}
-
-	return -ENOIOCTLCMD;
-}
-
-static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ch341_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	u8 mcr;
-	u8 status;
-	unsigned int result;
-
-	dbg("%s (%d)", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	mcr = priv->line_control;
-	status = priv->line_status;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	result = ((mcr & CH341_BIT_DTR)		? TIOCM_DTR : 0)
-		  | ((mcr & CH341_BIT_RTS)	? TIOCM_RTS : 0)
-		  | ((status & CH341_BIT_CTS)	? TIOCM_CTS : 0)
-		  | ((status & CH341_BIT_DSR)	? TIOCM_DSR : 0)
-		  | ((status & CH341_BIT_RI)	? TIOCM_RI  : 0)
-		  | ((status & CH341_BIT_DCD)	? TIOCM_CD  : 0);
-
-	dbg("%s - result = %x", __func__, result);
 
-	return result;
+	 /* Copy back the old hardware settings */
+	 tty_termios_copy_hw(tty->termios, old_termios);
+	 /* And re-encode with the new baud */
+	 tty_encode_baud_rate(tty, baud_rate, baud_rate);
 }
 
 
@@ -564,17 +339,12 @@ static struct usb_serial_driver ch341_device = {
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
-	.id_table          = id_table,
-	.usb_driver        = &ch341_driver,
-	.num_ports         = 1,
-	.open              = ch341_open,
-	.close             = ch341_close,
-	.ioctl             = ch341_ioctl,
-	.set_termios       = ch341_set_termios,
-	.tiocmget          = ch341_tiocmget,
-	.tiocmset          = ch341_tiocmset,
-	.read_int_callback = ch341_read_int_callback,
-	.attach            = ch341_attach,
+	.id_table         = id_table,
+	.usb_driver       = &ch341_driver,
+	.num_ports        = 1,
+	.open             = ch341_open,
+	.set_termios      = ch341_set_termios,
+	.attach           = ch341_attach,
 };
 
 static int __init ch341_init(void)
-- 
GitLab


From f4c1a8379a6d1ba39ac7b87f75d1352ef05cffff Mon Sep 17 00:00:00 2001
From: Werner Cornelius <werner@cornelius-consult.de>
Date: Fri, 16 Jan 2009 21:02:41 +0100
Subject: [PATCH 0416/1421] USB: usb-serial ch341: support for DTR/RTS/CTS

commit 664d5df92e88b6ef091048a802b3750f4e989180 upstream.

Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds:
- support all baudrates, not just a hard-coded set
- support for controlling DTR, RTS and CTS

Features still missing:
- character length other than 8 bits
- parity settings
- break control

I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by
Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for
refusing a similar patch from Tollef Fog Heen.

Usage example by Tollef Fog Heen :
        TEMPer USB thermometer <http://err.no/src/TEMPer.c>

based on a patch by:

	From: Tollef Fog Heen <tfheen@err.no>

	* Implement support for all baud rates rather than just a hard
	  coded set.
	* Make it possible to control status and control lines
	* Grab a bunch of #defines from FreeBSD to reduce the number of
	  magic numbers in the file

Signed-off-by: Werner Cornelius <Werner.Cornelius@cornelius-consult.de>
Signed-off-by: Boris Hajduk <boris@hajduk.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Tollef Fog Heen <tfheen@err.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ch341.c | 374 ++++++++++++++++++++++++++++++-------
 1 file changed, 302 insertions(+), 72 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d33d39d9b7e..ab4cc277aa6 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -1,5 +1,7 @@
 /*
  * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
+ * Copyright 2009, Boris Hajduk <boris@hajduk.org>
  *
  * ch341.c implements a serial port driver for the Winchiphead CH341.
  *
@@ -21,9 +23,39 @@
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 
-#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_BAUD_RATE 9600
 #define DEFAULT_TIMEOUT   1000
 
+/* flags for IO-Bits */
+#define CH341_BIT_RTS (1 << 6)
+#define CH341_BIT_DTR (1 << 5)
+
+/******************************/
+/* interrupt pipe definitions */
+/******************************/
+/* always 4 interrupt bytes */
+/* first irq byte normally 0x08 */
+/* second irq byte base 0x7d + below */
+/* third irq byte base 0x94 + below */
+/* fourth irq byte normally 0xee */
+
+/* second interrupt byte */
+#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
+
+/* status returned in third interrupt answer byte, inverted in data
+   from irq */
+#define CH341_BIT_CTS 0x01
+#define CH341_BIT_DSR 0x02
+#define CH341_BIT_RI  0x04
+#define CH341_BIT_DCD 0x08
+#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
+
+/*******************************/
+/* baudrate calculation factor */
+/*******************************/
+#define CH341_BAUDBASE_FACTOR 1532620800
+#define CH341_BAUDBASE_DIVMAX 3
+
 static int debug;
 
 static struct usb_device_id id_table [] = {
@@ -34,9 +66,12 @@ static struct usb_device_id id_table [] = {
 MODULE_DEVICE_TABLE(usb, id_table);
 
 struct ch341_private {
-	unsigned baud_rate;
-	u8 dtr;
-	u8 rts;
+	spinlock_t lock; /* access lock */
+	wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
+	unsigned baud_rate; /* set baud rate */
+	u8 line_control; /* set line control value RTS/DTR */
+	u8 line_status; /* active status of modem control inputs */
+	u8 multi_status_change; /* status changed multiple since last call */
 };
 
 static int ch341_control_out(struct usb_device *dev, u8 request,
@@ -72,37 +107,28 @@ static int ch341_set_baudrate(struct usb_device *dev,
 {
 	short a, b;
 	int r;
+	unsigned long factor;
+	short divisor;
 
 	dbg("ch341_set_baudrate(%d)", priv->baud_rate);
-	switch (priv->baud_rate) {
-	case 2400:
-		a = 0xd901;
-		b = 0x0038;
-		break;
-	case 4800:
-		a = 0x6402;
-		b = 0x001f;
-		break;
-	case 9600:
-		a = 0xb202;
-		b = 0x0013;
-		break;
-	case 19200:
-		a = 0xd902;
-		b = 0x000d;
-		break;
-	case 38400:
-		a = 0x6403;
-		b = 0x000a;
-		break;
-	case 115200:
-		a = 0xcc03;
-		b = 0x0008;
-		break;
-	default:
+
+	if (!priv->baud_rate)
 		return -EINVAL;
+	factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
+	divisor = CH341_BAUDBASE_DIVMAX;
+
+	while ((factor > 0xfff0) && divisor) {
+		factor >>= 3;
+		divisor--;
 	}
 
+	if (factor > 0xfff0)
+		return -EINVAL;
+
+	factor = 0x10000 - factor;
+	a = (factor & 0xff00) | divisor;
+	b = factor & 0xff;
+
 	r = ch341_control_out(dev, 0x9a, 0x1312, a);
 	if (!r)
 		r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
@@ -110,19 +136,18 @@ static int ch341_set_baudrate(struct usb_device *dev,
 	return r;
 }
 
-static int ch341_set_handshake(struct usb_device *dev,
-			       struct ch341_private *priv)
+static int ch341_set_handshake(struct usb_device *dev, u8 control)
 {
-	dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
-	return ch341_control_out(dev, 0xa4,
-		~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+	dbg("ch341_set_handshake(0x%02x)", control);
+	return ch341_control_out(dev, 0xa4, ~control, 0);
 }
 
-static int ch341_get_status(struct usb_device *dev)
+static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 {
 	char *buffer;
 	int r;
 	const unsigned size = 8;
+	unsigned long flags;
 
 	dbg("ch341_get_status()");
 
@@ -134,10 +159,15 @@ static int ch341_get_status(struct usb_device *dev)
 	if (r < 0)
 		goto out;
 
-	/* Not having the datasheet for the CH341, we ignore the bytes returned
-	 * from the device. Return error if the device did not respond in time.
-	 */
-	r = 0;
+	/* setup the private status if available */
+	if (r == 2) {
+		r = 0;
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+		priv->multi_status_change = 0;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	} else
+		r = -EPROTO;
 
 out:	kfree(buffer);
 	return r;
@@ -180,7 +210,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 		goto out;
 
 	/* expect 0xff 0xee */
-	r = ch341_get_status(dev);
+	r = ch341_get_status(dev, priv);
 	if (r < 0)
 		goto out;
 
@@ -192,12 +222,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	r = ch341_set_handshake(dev, priv);
+	r = ch341_set_handshake(dev, priv->line_control);
 	if (r < 0)
 		goto out;
 
 	/* expect 0x9f 0xee */
-	r = ch341_get_status(dev);
+	r = ch341_get_status(dev, priv);
 
 out:	kfree(buffer);
 	return r;
@@ -216,9 +246,10 @@ static int ch341_attach(struct usb_serial *serial)
 	if (!priv)
 		return -ENOMEM;
 
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->dtr = 1;
-	priv->rts = 1;
+	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r < 0)
@@ -231,6 +262,35 @@ error:	kfree(priv);
 	return r;
 }
 
+static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int c_cflag;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* shutdown our urbs */
+	dbg("%s - shutting down urbs", __func__);
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
+		if (c_cflag & HUPCL) {
+			/* drop DTR and RTS */
+			spin_lock_irqsave(&priv->lock, flags);
+			priv->line_control = 0;
+			spin_unlock_irqrestore(&priv->lock, flags);
+			ch341_set_handshake(port->serial->dev, 0);
+		}
+	}
+	wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+
 /* open this device, set default parameters */
 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
@@ -242,14 +302,13 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("ch341_open()");
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->dtr = 1;
-	priv->rts = 1;
+	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
 		goto out;
 
-	r = ch341_set_handshake(serial->dev, priv);
+	r = ch341_set_handshake(serial->dev, priv->line_control);
 	if (r)
 		goto out;
 
@@ -257,6 +316,16 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (r)
 		goto out;
 
+	dbg("%s - submitting interrupt urb", __func__);
+	port->interrupt_in_urb->dev = serial->dev;
+	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (r) {
+		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+			" error %d\n", __func__, r);
+		ch341_close(tty, port, NULL);
+		return -EPROTO;
+	}
+
 	r = usb_serial_generic_open(tty, port, filp);
 
 out:	return r;
@@ -270,38 +339,194 @@ static void ch341_set_termios(struct tty_struct *tty,
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned baud_rate;
+	unsigned long flags;
 
 	dbg("ch341_set_termios()");
 
+	if (!tty || !tty->termios)
+		return;
+
 	baud_rate = tty_get_baud_rate(tty);
 
-	switch (baud_rate) {
-	case 2400:
-	case 4800:
-	case 9600:
-	case 19200:
-	case 38400:
-	case 115200:
-		priv->baud_rate = baud_rate;
-		break;
-	default:
-		dbg("Rate %d not supported, using %d",
-			baud_rate, DEFAULT_BAUD_RATE);
-		priv->baud_rate = DEFAULT_BAUD_RATE;
+	priv->baud_rate = baud_rate;
+
+	if (baud_rate) {
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+		spin_unlock_irqrestore(&priv->lock, flags);
+		ch341_set_baudrate(port->serial->dev, priv);
+	} else {
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
-	ch341_set_baudrate(port->serial->dev, priv);
+	ch341_set_handshake(port->serial->dev, priv->line_control);
 
 	/* Unimplemented:
 	 * (cflag & CSIZE) : data bits [5, 8]
 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 	 * (cflag & CSTOPB) : stop bits [1, 2]
 	 */
+}
+
+static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
+			  unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (set & TIOCM_RTS)
+		priv->line_control |= CH341_BIT_RTS;
+	if (set & TIOCM_DTR)
+		priv->line_control |= CH341_BIT_DTR;
+	if (clear & TIOCM_RTS)
+		priv->line_control &= ~CH341_BIT_RTS;
+	if (clear & TIOCM_DTR)
+		priv->line_control &= ~CH341_BIT_DTR;
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ch341_set_handshake(port->serial->dev, control);
+}
+
+static void ch341_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int actual_length = urb->actual_length;
+	int status;
+
+	dbg("%s (%d)", __func__, port->number);
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    urb->status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __func__,
+			      urb->actual_length, urb->transfer_buffer);
+
+	if (actual_length >= 4) {
+		struct ch341_private *priv = usb_get_serial_port_data(port);
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
+		if ((data[1] & CH341_MULT_STAT))
+			priv->multi_status_change = 1;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		wake_up_interruptible(&priv->delta_msr_wait);
+	}
+
+exit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status)
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, status);
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 prevstatus;
+	u8 status;
+	u8 changed;
+	u8 multi_change = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	prevstatus = priv->line_status;
+	priv->multi_status_change = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (!multi_change) {
+		interruptible_sleep_on(&priv->delta_msr_wait);
+		/* see if a signal did it */
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		status = priv->line_status;
+		multi_change = priv->multi_status_change;
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		changed = prevstatus ^ status;
+
+		if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
+		    ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
+		    ((arg & TIOCM_CD)  && (changed & CH341_BIT_DCD)) ||
+		    ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
+			return 0;
+		}
+		prevstatus = status;
+	}
+
+	return 0;
+}
+
+/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
+static int ch341_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	switch (cmd) {
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		return wait_modem_info(port, arg);
+
+	default:
+		dbg("%s not supported = 0x%04x", __func__, cmd);
+		break;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 mcr;
+	u8 status;
+	unsigned int result;
+
+	dbg("%s (%d)", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	mcr = priv->line_control;
+	status = priv->line_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	result = ((mcr & CH341_BIT_DTR)		? TIOCM_DTR : 0)
+		  | ((mcr & CH341_BIT_RTS)	? TIOCM_RTS : 0)
+		  | ((status & CH341_BIT_CTS)	? TIOCM_CTS : 0)
+		  | ((status & CH341_BIT_DSR)	? TIOCM_DSR : 0)
+		  | ((status & CH341_BIT_RI)	? TIOCM_RI  : 0)
+		  | ((status & CH341_BIT_DCD)	? TIOCM_CD  : 0);
+
+	dbg("%s - result = %x", __func__, result);
 
-	 /* Copy back the old hardware settings */
-	 tty_termios_copy_hw(tty->termios, old_termios);
-	 /* And re-encode with the new baud */
-	 tty_encode_baud_rate(tty, baud_rate, baud_rate);
+	return result;
 }
 
 
@@ -339,12 +564,17 @@ static struct usb_serial_driver ch341_device = {
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
-	.id_table         = id_table,
-	.usb_driver       = &ch341_driver,
-	.num_ports        = 1,
-	.open             = ch341_open,
-	.set_termios      = ch341_set_termios,
-	.attach           = ch341_attach,
+	.id_table          = id_table,
+	.usb_driver        = &ch341_driver,
+	.num_ports         = 1,
+	.open              = ch341_open,
+	.close             = ch341_close,
+	.ioctl             = ch341_ioctl,
+	.set_termios       = ch341_set_termios,
+	.tiocmget          = ch341_tiocmget,
+	.tiocmset          = ch341_tiocmset,
+	.read_int_callback = ch341_read_int_callback,
+	.attach            = ch341_attach,
 };
 
 static int __init ch341_init(void)
-- 
GitLab


From dfc15e8955338fedf5c5d15622c4042c1e4ee332 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 9 Apr 2009 14:59:44 -0400
Subject: [PATCH 0417/1421] usb-storage: fix mistake in Makefile

This patch (as1228) fixes a Makefile error introduced when the
subdrivers in usb-storage were split out into separate modules.  The
intention is that when CONFIG_USB_LIBUSUAL is set, libusual.o and
usual-tables.o should be combined into a single object file (called
usb-libusual).  The current Makefile will instead create two separate
objects, and the result won't load properly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 5be54c01966..ef7e5a8ceab 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,7 +17,8 @@ usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 ifeq ($(CONFIG_USB_LIBUSUAL),)
 	usb-storage-objs	+= usual-tables.o
 else
-	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
+	obj-$(CONFIG_USB)	+= usb-libusual.o
+	usb-libusual-objs	:= libusual.o usual-tables.o
 endif
 
 obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
-- 
GitLab


From d45e230bf03850f17394a760dfa003d986a67729 Mon Sep 17 00:00:00 2001
From: "Dr. Greg Wettstein" <greg@enjellic.com>
Date: Sat, 11 Apr 2009 09:12:08 -0500
Subject: [PATCH 0418/1421] USB device codes for Motorola phone.

The v950 appears to be a ruggedized version of the Motorola Razor
phone.  Tethering to the phone to use it in 'phone as modem' mode
requires the use of the specialized moto-modem driver which layers
over the usb-serial driver.  Support for the v950 was added simply
adding the device ID's for the phone.

Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/moto_modem.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 2e8e05462ef..b66b71ccd12 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */
 	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Mororola phone */
 	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */
+	{ USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
GitLab


From 3444b26afa145148951112534f298bdc554ec789 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Wed, 8 Apr 2009 17:36:28 +0000
Subject: [PATCH 0419/1421] USB: add reset endpoint operations

Wireless USB endpoint state has a sequence number and a current
window and not just a single toggle bit.  So allow HCDs to provide a
endpoint_reset method and call this or clear the software toggles as
required (after a clear halt, set configuration etc.).

usb_settoggle() and friends are then HCD internal and are moved into
core/hcd.h and all device drivers call usb_reset_endpoint() instead.

If the device endpoint state has been reset (with a clear halt) but
the host endpoint state has not then subsequent data transfers will
not complete. The device will only work again after it is reset or
disconnected.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/block/ub.c                        | 20 ++++----
 drivers/isdn/hisax/st5481_usb.c           |  9 +---
 drivers/media/video/pvrusb2/pvrusb2-hdw.c |  1 -
 drivers/usb/core/devio.c                  |  2 +-
 drivers/usb/core/hcd.c                    | 26 ++++++++++
 drivers/usb/core/hcd.h                    | 14 ++++++
 drivers/usb/core/message.c                | 58 +++++++++++++++--------
 drivers/usb/core/usb.c                    |  2 +-
 drivers/usb/storage/transport.c           |  4 +-
 include/linux/usb.h                       |  9 +---
 10 files changed, 91 insertions(+), 54 deletions(-)

diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 69b7f8e7759..689cd27ac89 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 {
 	struct urb *urb = &sc->work_urb;
 	struct bulk_cs_wrap *bcs;
+	int endp;
 	int len;
 	int rc;
 
@@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		return;
 	}
 
+	endp = usb_pipeendpoint(sc->last_pipe);
+	if (usb_pipein(sc->last_pipe))
+		endp |= USB_DIR_IN;
+
 	if (cmd->state == UB_CMDST_CLEAR) {
 		if (urb->status == -EPIPE) {
 			/*
@@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_sense(sc, cmd);
 
@@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_stat(sc, cmd);
 
@@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_stat_counted(sc, cmd);
 
@@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
 	del_timer_sync(&timer);
 	usb_kill_urb(&sc->work_urb);
 
-	/* reset the endpoint toggle */
-	usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+	usb_reset_endpoint(sc->dev, endp);
 
 	return 0;
 }
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ec3c0e50766..2b3a055059e 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb)
 	if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
 	        /* Special case handling for pipe reset */
 		le16_to_cpus(&ctrl_msg->dr.wIndex);
-
-		/* toggle is reset on clear */
-		usb_settoggle(adapter->usb_dev, 
-			      ctrl_msg->dr.wIndex & ~USB_DIR_IN, 
-			      (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
-			      0);
-
-
+		usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
 	}
 	
 	if (ctrl_msg->complete)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index d9d974a8f52..add3395d324 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
 		return ret;
 	}
 
-	usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
 	usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
 
 	pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index df3c539f652..308609039c7 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg)
 	ret = checkintf(ps, ret);
 	if (ret)
 		return ret;
-	usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+	usb_reset_endpoint(ps->dev, ep);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 81fa8506825..42b93da1085 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev,
 		hcd->driver->endpoint_disable(hcd, ep);
 }
 
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep:   the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+			    struct usb_host_endpoint *ep)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (hcd->driver->endpoint_reset)
+		hcd->driver->endpoint_reset(hcd, ep);
+	else {
+		int epnum = usb_endpoint_num(&ep->desc);
+		int is_out = usb_endpoint_dir_out(&ep->desc);
+		int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+		usb_settoggle(udev, epnum, is_out, 0);
+		if (is_control)
+			usb_settoggle(udev, epnum, !is_out, 0);
+	}
+}
+
 /* Protect against drivers that try to unlink URBs after the device
  * is gone, by waiting until all unlinks for @udev are finished.
  * Since we don't currently track URBs by device, simply wait until
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index f750eb1ab59..e7d4479de41 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -206,6 +206,11 @@ struct hc_driver {
 	void 	(*endpoint_disable)(struct usb_hcd *hcd,
 			struct usb_host_endpoint *ep);
 
+	/* (optional) reset any endpoint state such as sequence number
+	   and current window */
+	void 	(*endpoint_reset)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
 	/* root hub support */
 	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
 	int	(*hub_control) (struct usb_hcd *hcd,
@@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
@@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
 extern void usb_hc_died(struct usb_hcd *hcd);
 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
 
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+		 ((bit) << (ep)))
+
 /* -------------------------------------------------------------------------- */
 
 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 30a0690f368..b6262837765 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
 	 * the copy in usb-storage, for as long as we need two copies.
 	 */
 
-	/* toggle was reset by the clear */
-	usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+	usb_reset_endpoint(dev, endp);
 
 	return 0;
 }
@@ -1075,6 +1074,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
 	}
 }
 
+/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (usb_endpoint_out(epaddr))
+		ep = dev->ep_out[epnum];
+	else
+		ep = dev->ep_in[epnum];
+	if (ep)
+		usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
 /**
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
@@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 		usb_disable_endpoint(dev, i, true);
 		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
-	dev->toggle[0] = dev->toggle[1] = 0;
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
  * usb_enable_endpoint - Enable an endpoint for USB communications
  * @dev: the device whose interface is being enabled
  * @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
  *
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
  * For control endpoints, both the input and output sides are handled.
  */
 void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
-		bool reset_toggle)
+		bool reset_ep)
 {
 	int epnum = usb_endpoint_num(&ep->desc);
 	int is_out = usb_endpoint_dir_out(&ep->desc);
 	int is_control = usb_endpoint_xfer_control(&ep->desc);
 
-	if (is_out || is_control) {
-		if (reset_toggle)
-			usb_settoggle(dev, epnum, 1, 0);
+	if (reset_ep)
+		usb_hcd_reset_endpoint(dev, ep);
+	if (is_out || is_control)
 		dev->ep_out[epnum] = ep;
-	}
-	if (!is_out || is_control) {
-		if (reset_toggle)
-			usb_settoggle(dev, epnum, 0, 0);
+	if (!is_out || is_control)
 		dev->ep_in[epnum] = ep;
-	}
 	ep->enabled = 1;
 }
 
@@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
  * usb_enable_interface - Enable all the endpoints for an interface
  * @dev: the device whose interface is being enabled
  * @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
  *
  * Enables all the endpoints for the interface's current altsetting.
  */
 void usb_enable_interface(struct usb_device *dev,
-		struct usb_interface *intf, bool reset_toggles)
+		struct usb_interface *intf, bool reset_eps)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
-		usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+		usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
 }
 
 /**
@@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * This issues a standard SET_CONFIGURATION request to the device using
  * the current configuration.  The effect is to reset most USB-related
  * state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
  * endpoints).  Other usbcore state is unchanged, including bindings of
  * usb device drivers to interfaces.
  *
@@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * (multi-interface) devices.  Instead, the driver for each interface may
  * use usb_set_interface() on the interfaces it claims.  Be careful though;
  * some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles).  Resetting the whole
+ * reset all the interface state (notably endpoint state).  Resetting the whole
  * configuration would affect other drivers' interfaces.
  *
  * The caller must own the device lock.
@@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev)
 	if (retval < 0)
 		return retval;
 
-	dev->toggle[0] = dev->toggle[1] = 0;
-
 	/* re-init hc/hcd interface/endpoint state */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = config->interface[i];
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index dcfc072630c..7eee400d3e3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
 	dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
 	/* ep0 maxpacket comes later, from device descriptor */
-	usb_enable_endpoint(dev, &dev->ep0, true);
+	usb_enable_endpoint(dev, &dev->ep0, false);
 	dev->can_submit = 1;
 
 	/* Save readable and stable topology id, distinguishing devices
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 49aedb36dc1..fcb32021721 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
 		USB_ENDPOINT_HALT, endp,
 		NULL, 0, 3*HZ);
 
-	/* reset the endpoint toggle */
 	if (result >= 0)
-		usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
-				usb_pipeout(pipe), 0);
+		usb_reset_endpoint(us->pusb_dev, endp);
 
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c6b2ab41b90..3aa2cd1f8d0 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index,
 extern int usb_clear_halt(struct usb_device *dev, int pipe);
 extern int usb_reset_configuration(struct usb_device *dev);
 extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
 
 /* this request isn't really synchronous, but it belongs with the others */
 extern int usb_driver_set_configuration(struct usb_device *udev, int config);
@@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io);
 #define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
 #define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
 
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
-		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
-		 ((bit) << (ep)))
-
-
 static inline unsigned int __create_pipe(struct usb_device *dev,
 		unsigned int endpoint)
 {
-- 
GitLab


From 7f0406db5fe4dd3ad3cbd53830239a87d68156fd Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Wed, 8 Apr 2009 17:36:29 +0000
Subject: [PATCH 0420/1421] USB: whci-hcd: provide a endpoint_reset method

Provide a endpoint_reset method to reset sequence number and current
window.  This QHead information can only be changed while the qset is
not in a schedule.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/whci/asl.c     |  3 ++-
 drivers/usb/host/whci/hcd.c     | 23 +++++++++++++++++++++++
 drivers/usb/host/whci/pzl.c     |  4 ++--
 drivers/usb/host/whci/qset.c    | 24 +++++++++++++++++++++---
 drivers/usb/host/whci/whcd.h    |  1 +
 drivers/usb/host/whci/whci-hc.h |  1 +
 6 files changed, 50 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 958751ccea4..be753f66499 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
 		process_inactive_qtd(whc, qset, td);
 	}
 
-	update |= qset_add_qtds(whc, qset);
+	if (!qset->remove)
+		update |= qset_add_qtds(whc, qset);
 
 done:
 	/*
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 1569afd6245..e019a5058ab 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd,
 	}
 }
 
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+			       struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct whc_qset *qset;
+
+	qset = ep->hcpriv;
+	if (qset) {
+		qset->remove = 1;
+
+		if (usb_endpoint_xfer_bulk(&ep->desc)
+		    || usb_endpoint_xfer_control(&ep->desc))
+			queue_work(whc->workqueue, &whc->async_work);
+		else
+			queue_work(whc->workqueue, &whc->periodic_work);
+
+		qset_reset(whc, qset);
+	}
+}
+
+
 static struct hc_driver whc_hc_driver = {
 	.description = "whci-hcd",
 	.product_desc = "Wireless host controller",
@@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = {
 	.urb_enqueue = whc_urb_enqueue,
 	.urb_dequeue = whc_urb_dequeue,
 	.endpoint_disable = whc_endpoint_disable,
+	.endpoint_reset = whc_endpoint_reset,
 
 	.hub_status_data = wusbhc_rh_status_data,
 	.hub_control = wusbhc_rh_control,
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index df8b85f0709..0c40022a6b2 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
 		process_inactive_qtd(whc, qset, td);
 	}
 
-	update |= qset_add_qtds(whc, qset);
+	if (!qset->remove)
+		update |= qset_add_qtds(whc, qset);
 
 done:
 	/*
@@ -353,7 +354,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
 	qset_delete(whc, qset);
 }
 
-
 /**
  * pzl_init - initialize the periodic zone list
  * @whc: the WHCI host controller
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 7be74314ee1..640b38fbd05 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb)
 		QH_INFO3_TX_RATE_53_3
 		| QH_INFO3_TX_PWR(0) /* 0 == max power */
 		);
+
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
 }
 
 /**
  * qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
  */
 void qset_clear(struct whc *whc, struct whc_qset *qset)
 {
@@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
 	qset->remove = 0;
 
 	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
-	qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+	qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
 	qset->qh.err_count = 0;
-	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
 	qset->qh.scratch[0] = 0;
 	qset->qh.scratch[1] = 0;
 	qset->qh.scratch[2] = 0;
@@ -113,6 +117,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
 	init_completion(&qset->remove_complete);
 }
 
+/**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window.  This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+	wait_for_completion(&qset->remove_complete);
+
+	qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
 /**
  * get_qset - get the qset for an async endpoint
  *
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index d3543a181dc..24e94d983c5 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset);
 struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
 void qset_delete(struct whc *whc, struct whc_qset *qset);
 void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
 int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
 		 gfp_t mem_flags);
 void qset_free_std(struct whc *whc, struct whc_std *std);
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 51df7e313b3..794dba0d0f0 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -185,6 +185,7 @@ struct whc_qhead {
 #define QH_STATUS_FLOW_CTRL      (1 << 15)
 #define QH_STATUS_ICUR(i)        ((i) << 5)
 #define QH_STATUS_TO_ICUR(s)     (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK       0x1f
 
 /**
  * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
-- 
GitLab


From f720af91ec2c67e9a1abbd935570f4b4e1f0dd54 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Wed, 8 Apr 2009 17:36:31 +0000
Subject: [PATCH 0421/1421] USB: whci-hcd: check return value of
 usb_hcd_link_urb_to_ep()

Check the return value of usb_hcd_link_urb_to_ep() and do not add the
urb to the ASL/PZL if it returns an error.

Omitting the check results in urbs that appear to be submitted
successfully but then cannot be unliked (because
usb_hcd_check_unlink_urb() returns an error).  This can cause khubd (for
example) to block forever in usb_kill_urb().

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/whci/asl.c | 12 +++++++++---
 drivers/usb/host/whci/pzl.c | 12 +++++++++---
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index be753f66499..c2050785a81 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -255,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
 
 	spin_lock_irqsave(&whc->lock, flags);
 
+	err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+	if (err < 0) {
+		spin_unlock_irqrestore(&whc->lock, flags);
+		return err;
+	}
+
 	qset = get_qset(whc, urb, GFP_ATOMIC);
 	if (qset == NULL)
 		err = -ENOMEM;
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
 		if (!qset->in_sw_list)
 			asl_qset_insert_begin(whc, qset);
-	}
+	} else
+		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
 
 	spin_unlock_irqrestore(&whc->lock, flags);
 
 	if (!err)
 		queue_work(whc->workqueue, &whc->async_work);
 
-	return 0;
+	return err;
 }
 
 /**
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 0c40022a6b2..ff4ef9e910d 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -283,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
 
 	spin_lock_irqsave(&whc->lock, flags);
 
+	err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+	if (err < 0) {
+		spin_unlock_irqrestore(&whc->lock, flags);
+		return err;
+	}
+
 	qset = get_qset(whc, urb, GFP_ATOMIC);
 	if (qset == NULL)
 		err = -ENOMEM;
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
 		if (!qset->in_sw_list)
 			qset_insert_in_sw_list(whc, qset);
-	}
+	} else
+		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
 
 	spin_unlock_irqrestore(&whc->lock, flags);
 
 	if (!err)
 		queue_work(whc->workqueue, &whc->periodic_work);
 
-	return 0;
+	return err;
 }
 
 /**
-- 
GitLab


From 8db324ec4322a15cf8819b8a7f0eff5aa98b2ff6 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Wed, 8 Apr 2009 17:36:33 +0000
Subject: [PATCH 0422/1421] WUSB: disconnect all devices when stopping a WUSB
 HCD

Make sure all WUSB devices are disconnected when stopping a WUSB HCD so
that we don't leak the devices' wusb_dev structures.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/wusbcore/devconnect.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 386eaa22d21..63f200e4efb 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -396,7 +396,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
 
 	/* After a device disconnects, change the GTK (see [WUSB]
 	 * section 6.2.11.2). */
-	wusbhc_gtk_rekey(wusbhc);
+	if (wusbhc->active)
+		wusbhc_gtk_rekey(wusbhc);
 
 	/* The Wireless USB part has forgotten about the device already; now
 	 * khubd's timer will pick up the disconnection and remove the USB
@@ -1084,15 +1085,21 @@ error_mmcie_set:
  * wusbhc_devconnect_stop - stop managing connected devices
  * @wusbhc: the WUSB HC
  *
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
  */
 void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
 {
-	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
-	WARN_ON(!list_empty(&wusbhc->cack_list));
+	int i;
 
+	mutex_lock(&wusbhc->mutex);
+	for (i = 0; i < wusbhc->ports_max; i++) {
+		if (wusbhc->port[i].wusb_dev)
+			__wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+	}
+	mutex_unlock(&wusbhc->mutex);
+
+	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
 	wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
 	kfree(wusbhc->wuie_host_info);
 	wusbhc->wuie_host_info = NULL;
-- 
GitLab


From 5936ac7f93965931c508e1928d142076998ce65d Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Wed, 8 Apr 2009 17:36:32 +0000
Subject: [PATCH 0423/1421] WUSB: fix oops when completing URBs for
 disconnected devices

Fix an oops in wusbhc_giveback_urb() if the wusb device had disconnected
while an urb was in progress. Also release the ref count obtained here.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/wusbcore/devconnect.c | 2 ++
 drivers/usb/wusbcore/wusbhc.c     | 6 ++++--
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 63f200e4efb..4ac4300a3f9 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work)
 	mutex_lock(&wusbhc->mutex);
 	wusbhc_devconnect_acked(wusbhc, wusb_dev);
 	mutex_unlock(&wusbhc->mutex);
+
+	wusb_dev_put(wusb_dev);
 }
 
 /*
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 07c63a31c79..3638cc68529 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -339,13 +339,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
 {
 	struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
 
-	if (status == 0) {
+	if (status == 0 && wusb_dev) {
 		wusb_dev->entry_ts = jiffies;
 
-		/* wusbhc_devconnect_acked() can't be called from from
+		/* wusbhc_devconnect_acked() can't be called from
 		   atomic context so defer it to a work queue. */
 		if (!list_empty(&wusb_dev->cack_node))
 			queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+		else
+			wusb_dev_put(wusb_dev);
 	}
 
 	usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
-- 
GitLab


From fca10c81d99ff9956179058460dfddc0418f3902 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Wed, 8 Apr 2009 17:36:30 +0000
Subject: [PATCH 0424/1421] WUSB: correct format of wusb_chid sysfs file

Make the wusb_chid sysfs file match the ABI documentation.

Print all zeros if the WUSB host is stopped (instead of an empty file)
and end the file with a newline.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/wusbcore/wusbhc.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 3638cc68529..ee6256f2363 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show,
 					     wusb_trust_timeout_store);
 
 /*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
  */
 static ssize_t wusb_chid_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
 	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	const struct wusb_ckhdid *chid;
 	ssize_t result = 0;
 
 	if (wusbhc->wuie_host_info != NULL)
-		result += ckhdid_printf(buf, PAGE_SIZE,
-					&wusbhc->wuie_host_info->CHID);
+		chid = &wusbhc->wuie_host_info->CHID;
+	else
+		chid = &wusb_ckhdid_zero;
+
+	result += ckhdid_printf(buf, PAGE_SIZE, chid);
+	result += sprintf(buf + result, "\n");
+
 	return result;
 }
 
 /*
- * Store a new CHID
- *
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- *   (unless it was started, it will just change the CHID,
- *   diconnecting all devices first).
+ * Store a new CHID.
  *
- * So first we scan the MMC we are sent and then we act on it.  We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
  *
  * See wusbhc_chid_set() for more info.
  */
-- 
GitLab


From 3a3236827372a1d3ddfb2ea8abf84ba89e856b44 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:23:34 +0400
Subject: [PATCH 0425/1421] Staging: at76: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/at76_usb/at76_usb.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index 6f6e36a3bd9..c8af9a868d6 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -5259,6 +5259,18 @@ static int at76_alloc_urbs(struct at76_priv *priv,
 	return 0;
 }
 
+static const struct net_device_ops at76_netdev_ops = {
+	.ndo_open		= at76_open,
+	.ndo_stop		= at76_stop,
+	.ndo_get_stats		= at76_get_stats,
+	.ndo_start_xmit		= at76_tx,
+	.ndo_tx_timeout		= at76_tx_timeout,
+	.ndo_set_multicast_list	= at76_set_multicast,
+	.ndo_set_mac_address	= at76_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 /* Register network device and initialize the hardware */
 static int at76_init_new_device(struct at76_priv *priv,
 				struct usb_interface *interface)
@@ -5303,21 +5315,15 @@ static int at76_init_new_device(struct at76_priv *priv,
 	priv->scan_mode = SCAN_TYPE_ACTIVE;
 
 	netdev->flags &= ~IFF_MULTICAST;	/* not yet or never */
-	netdev->open = at76_open;
-	netdev->stop = at76_stop;
-	netdev->get_stats = at76_get_stats;
+	netdev->netdev_ops = &at76_netdev_ops;
 	netdev->ethtool_ops = &at76_ethtool_ops;
 
 	/* Add pointers to enable iwspy support. */
 	priv->wireless_data.spy_data = &priv->spy_data;
 	netdev->wireless_data = &priv->wireless_data;
 
-	netdev->hard_start_xmit = at76_tx;
-	netdev->tx_timeout = at76_tx_timeout;
 	netdev->watchdog_timeo = 2 * HZ;
 	netdev->wireless_handlers = &at76_handler_def;
-	netdev->set_multicast_list = at76_set_multicast;
-	netdev->set_mac_address = at76_set_mac_address;
 	dev_alloc_name(netdev, "wlan%d");
 
 	ret = register_netdev(priv->netdev);
-- 
GitLab


From 0e46ff33d4a698bf0b69fec0eab076d65709e357 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:24:32 +0400
Subject: [PATCH 0426/1421] Staging: epl: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/epl/VirtualEthernetLinux.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c
index 21206c4d22f..077724a556c 100644
--- a/drivers/staging/epl/VirtualEthernetLinux.c
+++ b/drivers/staging/epl/VirtualEthernetLinux.c
@@ -284,6 +284,17 @@ static tEplKernel VEthRecvFrame(tEplFrameInfo * pFrameInfo_p)
 	return Ret;
 }
 
+static const struct net_device_ops epl_netdev_ops = {
+	.ndo_open		= VEthOpen,
+	.ndo_stop		= VEthClose,
+	.ndo_get_stats		= VEthGetStats,
+	.ndo_start_xmit		= VEthXmit,
+	.ndo_tx_timeout		= VEthTimeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
 {
 	tEplKernel Ret = kEplSuccessful;
@@ -299,11 +310,7 @@ tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
 		goto Exit;
 	}
 
-	pVEthNetDevice_g->open = VEthOpen;
-	pVEthNetDevice_g->stop = VEthClose;
-	pVEthNetDevice_g->get_stats = VEthGetStats;
-	pVEthNetDevice_g->hard_start_xmit = VEthXmit;
-	pVEthNetDevice_g->tx_timeout = VEthTimeout;
+	pVEthNetDevice_g->netdev_ops = &epl_netdev_ops;
 	pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT;
 	pVEthNetDevice_g->destructor = free_netdev;
 
-- 
GitLab


From fa5a602a62d7dca6d8ea24cfb4aae349dbaabc7b Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:25:33 +0400
Subject: [PATCH 0427/1421] Staging: et131x: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/et131x/et131x_netdev.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index de65972ff36..951c73d5db2 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -112,6 +112,19 @@ void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 
+static const struct net_device_ops et131x_netdev_ops = {
+	.ndo_open		= et131x_open,
+	.ndo_stop		= et131x_close,
+	.ndo_start_xmit		= et131x_tx,
+	.ndo_set_multicast_list	= et131x_multicast,
+	.ndo_tx_timeout		= et131x_tx_timeout,
+	.ndo_change_mtu		= et131x_change_mtu,
+	.ndo_set_mac_address	= et131x_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_get_stats		= et131x_stats,
+	.ndo_do_ioctl		= et131x_ioctl,
+};
+
 /**
  * et131x_device_alloc
  *
@@ -142,16 +155,8 @@ struct net_device *et131x_device_alloc(void)
 	 */
 	//netdev->init               = &et131x_init;
 	//netdev->set_config = &et131x_config;
-	netdev->get_stats = &et131x_stats;
-	netdev->open = &et131x_open;
-	netdev->stop = &et131x_close;
-	netdev->do_ioctl = &et131x_ioctl;
-	netdev->set_multicast_list = &et131x_multicast;
-	netdev->hard_start_xmit = &et131x_tx;
-	netdev->tx_timeout = &et131x_tx_timeout;
 	netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
-	netdev->change_mtu = &et131x_change_mtu;
-	netdev->set_mac_address = &et131x_set_mac_addr;
+	netdev->netdev_ops = &et131x_netdev_ops;
 
 	//netdev->ethtool_ops        = &et131x_ethtool_ops;
 
-- 
GitLab


From 17a23b384f88a336a5230e80dea2013aad03b6f7 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:26:25 +0400
Subject: [PATCH 0428/1421] Staging: otus: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/otus/usbdrv.c | 47 +++++++++++++++++++++--------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c
index 565a839589f..540cbbb826f 100644
--- a/drivers/staging/otus/usbdrv.c
+++ b/drivers/staging/otus/usbdrv.c
@@ -822,6 +822,21 @@ int zfLnxVapXmitFrame(struct sk_buff *skb, struct net_device *dev)
     return 0;
 }
 
+static const struct net_device_ops vap_netdev_ops = {
+	.ndo_open		= zfLnxVapOpen,
+	.ndo_stop		= zfLnxVapClose,
+	.ndo_start_xmit		= zfLnxVapXmitFrame,
+	.ndo_get_stats		= usbdrv_get_stats,
+	.ndo_change_mtu		= usbdrv_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef ZM_HOSTAPD_SUPPORT
+	.ndo_do_ioctl		= usbdrv_ioctl,
+#else
+	.ndo_do_ioctl		= NULL,
+#endif
+};
+
 int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
 {
     /* Allocate net device structure */
@@ -846,16 +861,7 @@ int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
     vap[vapId].dev->ml_priv = parentDev->ml_priv;
 
     //dev->hard_start_xmit = &zd1212_wds_xmit_frame;
-    vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
-    vap[vapId].dev->open = &zfLnxVapOpen;
-    vap[vapId].dev->stop = &zfLnxVapClose;
-    vap[vapId].dev->get_stats = &usbdrv_get_stats;
-    vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
-#ifdef ZM_HOSTAPD_SUPPORT
-    vap[vapId].dev->do_ioctl = usbdrv_ioctl;
-#else
-    vap[vapId].dev->do_ioctl = NULL;
-#endif
+    vap[vapId].dev->netdev_ops = &vap_netdev_ops;
     vap[vapId].dev->destructor = free_netdev;
 
     vap[vapId].dev->tx_queue_len = 0;
@@ -1068,6 +1074,18 @@ void zfLnxUnlinkAllUrbs(struct usbdrv_private *macp)
     usb_unlink_urb(macp->RegInUrb);
 }
 
+static const struct net_device_ops otus_netdev_ops = {
+	.ndo_open		= usbdrv_open,
+	.ndo_stop		= usbdrv_close,
+	.ndo_start_xmit		= usbdrv_xmit_frame,
+	.ndo_change_mtu		= usbdrv_change_mtu,
+	.ndo_get_stats		= usbdrv_get_stats,
+	.ndo_set_multicast_list	= usbdrv_set_multi,
+	.ndo_set_mac_address	= usbdrv_set_mac,
+	.ndo_do_ioctl		= usbdrv_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
 {
     //unsigned char addr[6];
@@ -1092,14 +1110,7 @@ u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
     dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def;
 #endif
 
-    dev->open = usbdrv_open;
-    dev->hard_start_xmit = usbdrv_xmit_frame;
-    dev->stop = usbdrv_close;
-    dev->change_mtu = &usbdrv_change_mtu;
-    dev->get_stats = usbdrv_get_stats;
-    dev->set_multicast_list = usbdrv_set_multi;
-    dev->set_mac_address = usbdrv_set_mac;
-    dev->do_ioctl = usbdrv_ioctl;
+    dev->netdev_ops = &otus_netdev_ops;
 
     dev->flags |= IFF_MULTICAST;
 
-- 
GitLab


From ca7d2dbbadd6c3d6d10e98b94e25cb9566ed3af1 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:27:21 +0400
Subject: [PATCH 0429/1421] Staging: rt2860: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt2860/rt_main_dev.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index cf17bcdd733..6c4396f0903 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -722,6 +722,20 @@ err:
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt2860_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -733,11 +747,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
 
 #ifdef CONFIG_STA_SUPPORT
 #if WIRELESS_EXT >= 12
@@ -760,12 +769,8 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-	dev->validate_addr = NULL;
+	dev->netdev_ops = &rt2860_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
-- 
GitLab


From 4d562f74ec2cd3e957fbc222b0e975554bb5f2c2 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:28:11 +0400
Subject: [PATCH 0430/1421] Staging: rt2870: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt2870/rt_main_dev.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c
index 313ecea0bfa..48ad41136d0 100644
--- a/drivers/staging/rt2870/rt_main_dev.c
+++ b/drivers/staging/rt2870/rt_main_dev.c
@@ -855,6 +855,20 @@ err:
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt2870_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -866,12 +880,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
 #ifdef CONFIG_STA_SUPPORT
@@ -895,16 +903,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 //	dev->uninit = ieee80211_if_reinit;
 //	dev->destructor = ieee80211_if_free;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-    dev->validate_addr = NULL;
-#endif
+	dev->netdev_ops = &rt2870_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
-- 
GitLab


From d39efb24eaf7cbda4d161b152f1eab82939fb6e9 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:29:18 +0400
Subject: [PATCH 0431/1421] Staging: rt3070: convert to netdev_ops

Also remove unused variable.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt3070/rt_main_dev.c | 29 ++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c
index c000646286e..81f769cf109 100644
--- a/drivers/staging/rt3070/rt_main_dev.c
+++ b/drivers/staging/rt3070/rt_main_dev.c
@@ -436,7 +436,6 @@ static int rt28xx_init(IN struct net_device *net_dev)
 //    OID_SET_HT_PHYMODE		SetHT;
 //	WPDMA_GLO_CFG_STRUC     GloCfg;
 	UINT32 		MacCsr0 = 0;
-	UINT32		MacValue = 0;
 
 #ifdef RT2870
 #ifdef INF_AMAZON_SE
@@ -849,6 +848,20 @@ err:
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt3070_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -860,12 +873,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
 #ifdef CONFIG_STA_SUPPORT
@@ -889,16 +896,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 //	dev->uninit = ieee80211_if_reinit;
 //	dev->destructor = ieee80211_if_free;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-    dev->validate_addr = NULL;
-#endif
+	dev->netdev_ops = &rt3070_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
-- 
GitLab


From 79bd1096bb31445a04b43e470e03d40d700a14a1 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:30:08 +0400
Subject: [PATCH 0432/1421] Staging: slicoss: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/slicoss/slicoss.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 94815634847..79b3d1f1eff 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -345,6 +345,19 @@ static void slic_init_adapter(struct net_device *netdev,
 	return;
 }
 
+static const struct net_device_ops slic_netdev_ops = {
+	.ndo_open		= slic_entry_open,
+	.ndo_stop		= slic_entry_halt,
+	.ndo_start_xmit		= slic_xmit_start,
+	.ndo_do_ioctl		= slic_ioctl,
+	.ndo_set_mac_address	= slic_mac_set_address,
+	.ndo_get_stats		= slic_get_stats,
+	.ndo_set_multicast_list	= slic_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int __devinit slic_entry_probe(struct pci_dev *pcidev,
 			       const struct pci_device_id *pci_tbl_entry)
 {
@@ -442,13 +455,7 @@ static int __devinit slic_entry_probe(struct pci_dev *pcidev,
 
 	netdev->base_addr = (unsigned long)adapter->memorybase;
 	netdev->irq = adapter->irq;
-	netdev->open = slic_entry_open;
-	netdev->stop = slic_entry_halt;
-	netdev->hard_start_xmit = slic_xmit_start;
-	netdev->do_ioctl = slic_ioctl;
-	netdev->set_mac_address = slic_mac_set_address;
-	netdev->get_stats = slic_get_stats;
-	netdev->set_multicast_list = slic_mcast_set_list;
+	netdev->netdev_ops = &slic_netdev_ops;
 
 	slic_debug_adapter_create(adapter);
 
-- 
GitLab


From 7bea36118ee888f0428d22ea6a5560de33e6e739 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:30:46 +0400
Subject: [PATCH 0433/1421] Staging: sxg: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/sxg/sxg.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 891f6e33467..848d4be85a3 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -896,6 +896,22 @@ static inline int sxg_read_config(struct adapter_t *adapter)
 	return status;
 }
 
+static const struct net_device_ops sxg_netdev_ops = {
+	.ndo_open		= sxg_entry_open,
+	.ndo_stop		= sxg_entry_halt,
+	.ndo_start_xmit		= sxg_send_packets,
+	.ndo_do_ioctl		= sxg_ioctl,
+	.ndo_change_mtu		= sxg_change_mtu,
+	.ndo_get_stats		= sxg_get_stats,
+	.ndo_set_multicast_list	= sxg_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+#if XXXTODO
+	.ndo_set_mac_address	= sxg_mac_set_address,
+#else
+	.ndo_set_mac_address	= eth_mac_addr,
+#endif
+};
+
 static int sxg_entry_probe(struct pci_dev *pcidev,
 			   const struct pci_device_id *pci_tbl_entry)
 {
@@ -1095,16 +1111,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev,
 
 	netdev->base_addr = (unsigned long)adapter->base_addr;
 	netdev->irq = adapter->irq;
-	netdev->open = sxg_entry_open;
-	netdev->stop = sxg_entry_halt;
-	netdev->hard_start_xmit = sxg_send_packets;
-	netdev->do_ioctl = sxg_ioctl;
-	netdev->change_mtu = sxg_change_mtu;
-#if XXXTODO
-	netdev->set_mac_address = sxg_mac_set_address;
-#endif
-	netdev->get_stats = sxg_get_stats;
-	netdev->set_multicast_list = sxg_mcast_set_list;
+	netdev->netdev_ops = &sxg_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
  	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	err = sxg_set_interrupt_capability(adapter);
-- 
GitLab


From cea96778196dcf7127d6bbbf296c1651848650f2 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:31:28 +0400
Subject: [PATCH 0434/1421] Staging: wlan-ng: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/wlan-ng/p80211netdev.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index b2a606a3693..393e4df70df 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -711,6 +711,20 @@ static int wlan_change_mtu(netdevice_t *dev, int new_mtu)
 	return 0;
 }
 
+static const struct net_device_ops p80211_netdev_ops = {
+	.ndo_init		= p80211knetdev_init,
+	.ndo_open		= p80211knetdev_open,
+	.ndo_stop		= p80211knetdev_stop,
+	.ndo_get_stats		= p80211knetdev_get_stats,
+	.ndo_start_xmit		= p80211knetdev_hard_start_xmit,
+	.ndo_set_multicast_list	= p80211knetdev_set_multicast_list,
+	.ndo_do_ioctl		= p80211knetdev_do_ioctl,
+	.ndo_set_mac_address	= p80211knetdev_set_mac_address,
+	.ndo_tx_timeout		= p80211knetdev_tx_timeout,
+	.ndo_change_mtu		= wlan_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*----------------------------------------------------------------
 * wlan_setup
 *
@@ -756,11 +770,7 @@ int wlan_setup(wlandevice_t *wlandev)
 	} else {
 		wlandev->netdev = dev;
 		dev->ml_priv = wlandev;
-		dev->hard_start_xmit = p80211knetdev_hard_start_xmit;
-		dev->get_stats = p80211knetdev_get_stats;
-		dev->init = p80211knetdev_init;
-		dev->open = p80211knetdev_open;
-		dev->stop = p80211knetdev_stop;
+		dev->netdev_ops = &p80211_netdev_ops;
 
 		mutex_init(&wlandev->ioctl_lock);
 		/* block ioctls until fully initialised. Don't forget to call
-- 
GitLab


From a405f43ee336fb890fd967625cc133f9d2e59a9f Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Sun, 29 Mar 2009 19:59:13 +0400
Subject: [PATCH 0435/1421] Staging: line6: convert to snd_card_create()

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/line6/audio.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c
index 3aa946899ce..e2ac8d60f8c 100644
--- a/drivers/staging/line6/audio.c
+++ b/drivers/staging/line6/audio.c
@@ -27,11 +27,12 @@ int line6_init_audio(struct usb_line6 *line6)
 {
 	static int dev;
 	struct snd_card *card;
+	int err;
 
-	card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0);
-
-	if (card == NULL)
-		return -ENOMEM;
+	err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
+			      &card);
+	if (err < 0)
+		return err;
 
 	line6->card = card;
 
-- 
GitLab


From 7cf94029bc0ba99f85a95f19d6823391dffbcf5a Mon Sep 17 00:00:00 2001
From: Daniele Napolitano <dnax88@gmail.com>
Date: Wed, 1 Apr 2009 14:53:39 -0700
Subject: [PATCH 0436/1421] Staging: rt2870: add ID for Sitecom WL-315

Signed-off-by: Daniele Napolitano <dnax88@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt2870/rt2870.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5dd15aac9ce..a42caa37080 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -96,6 +96,7 @@
 	{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */		\
 	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */		\
 	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */		\
 	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\
-- 
GitLab


From 20aa9e9b5465a2566e23d78643735dfae3277dab Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 7 Apr 2009 18:43:43 +0100
Subject: [PATCH 0437/1421] Staging: aten2011: Clean up some tty bits

Minor fixes for tty layer stuff in this driver

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/uc2322/aten2011.c | 28 +++-------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 85b70545306..9c62f787cc9 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -603,10 +603,9 @@ static void ATEN2011_bulk_out_data_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&ATEN2011_port->port->port);
 
-	if (tty && ATEN2011_port->open) {
+	if (tty && ATEN2011_port->open)
 		/* tell the tty driver that something has changed */
-		wake_up_interruptible(&tty->write_wait);
-	}
+		tty_wakeup(tty);
 
 	/* schedule_work(&ATEN2011_port->port->work); */
 	tty_kref_put(tty);
@@ -825,12 +824,6 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
 	status = 0;
 	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-
-	if (tty)
-		tty->low_latency = 1;
 	/*
 	 * Check to see if we've set up our endpoint info yet
 	 * (can't set it up in ATEN2011_startup as the structures
@@ -1473,22 +1466,7 @@ static void ATEN2011_set_termios(struct tty_struct *tty,
 
 	cflag = tty->termios->c_cflag;
 
-	if (!cflag) {
-		dbg("%s %s", __func__, "cflag is NULL");
-		return;
-	}
-
-	/* check that they really want us to change something */
-	if (old_termios) {
-		if ((cflag == old_termios->c_cflag) &&
-		    (RELEVANT_IFLAG(tty->termios->c_iflag) ==
-		     RELEVANT_IFLAG(old_termios->c_iflag))) {
-			dbg("%s", "Nothing to change");
-			return;
-		}
-	}
-
-	dbg("%s - clfag %08x iflag %08x", __func__,
+	dbg("%s - cflag %08x iflag %08x", __func__,
 	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
 
 	if (old_termios) {
-- 
GitLab


From 1d8cbcf5d66b1f23f776a2c10ef9574a338cd109 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:53 -0700
Subject: [PATCH 0438/1421] Staging: binder: Remove VM_EXEC check.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Many platforms do not support mappings without VM_EXEC.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 79e90fed27d..b62cd2aae87 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -54,11 +54,7 @@ static int binder_read_proc_proc(
 #define SZ_4M                               0x400000
 #endif
 
-#ifndef __i386__
-#define FORBIDDEN_MMAP_FLAGS                (VM_WRITE | VM_EXEC)
-#else
 #define FORBIDDEN_MMAP_FLAGS                (VM_WRITE)
-#endif
 
 #define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64)
 
-- 
GitLab


From 85e0b0cbbfc17e7f7baa9e76f9a937249108fc52 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:54 -0700
Subject: [PATCH 0439/1421] Staging: binder: Don't create two proc entries with
 the same name if the driver is opened twice in one process.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index b62cd2aae87..39871da7ef9 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -2776,6 +2776,7 @@ static int binder_open(struct inode *nodp, struct file *filp)
 	if (binder_proc_dir_entry_proc) {
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 		create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
 	}
 
-- 
GitLab


From 4ddfc911e39a01f95ad9765d3b9e6f43e14eeff4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:55 -0700
Subject: [PATCH 0440/1421] Staging: binder: mmap fixes.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Only allow a binder file pointer to be mmapped once. The buffer management
code cannot deal with more then one area.
Also remove leftover mutex_unlock if mmap fails.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 39871da7ef9..761f5d6a9cf 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -2694,6 +2694,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	}
 	vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
 
+	if (proc->buffer) {
+		ret = -EBUSY;
+		failure_string = "already mapped";
+		goto err_already_mapped;
+	}
+
 	area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
 	if (area == NULL) {
 		ret = -ENOMEM;
@@ -2741,10 +2747,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 
 err_alloc_small_buf_failed:
 	kfree(proc->pages);
+	proc->pages = NULL;
 err_alloc_pages_failed:
 	vfree(proc->buffer);
+	proc->buffer = NULL;
 err_get_vm_area_failed:
-	mutex_unlock(&binder_lock);
+err_already_mapped:
 err_bad_arg:
 	printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
 	return ret;
-- 
GitLab


From ea5c4cc68e2b5f4ec41d666376d3606d4d5c3426 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:56 -0700
Subject: [PATCH 0441/1421] Staging: binder: Add more offset validation.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Check that datasize is not smaller than one flat_binder_object.
Check that offsets are aligned.
Check that offsets_size is aligned.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 761f5d6a9cf..64f95ee8a70 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -1430,10 +1430,19 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
 		return_error = BR_FAILED_REPLY;
 		goto err_copy_data_failed;
 	}
+	if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
+		binder_user_error("binder: %d:%d got transaction with "
+			"invalid offsets size, %zd\n",
+			proc->pid, thread->pid, tr->offsets_size);
+		return_error = BR_FAILED_REPLY;
+		goto err_bad_offset;
+	}
 	off_end = (void *)offp + tr->offsets_size;
 	for (; offp < off_end; offp++) {
 		struct flat_binder_object *fp;
-		if (*offp > t->buffer->data_size - sizeof(*fp)) {
+		if (*offp > t->buffer->data_size - sizeof(*fp) ||
+		    t->buffer->data_size < sizeof(*fp) ||
+		    !IS_ALIGNED(*offp, sizeof(void *))) {
 			binder_user_error("binder: %d:%d got transaction with "
 				"invalid offset, %zd\n",
 				proc->pid, thread->pid, *offp);
@@ -1651,7 +1660,9 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer
 		off_end = (void *)offp + buffer->offsets_size;
 	for (; offp < off_end; offp++) {
 		struct flat_binder_object *fp;
-		if (*offp > buffer->data_size - sizeof(*fp)) {
+		if (*offp > buffer->data_size - sizeof(*fp) ||
+		    buffer->data_size < sizeof(*fp) ||
+		    !IS_ALIGNED(*offp, sizeof(void *))) {
 			printk(KERN_ERR "binder: transaction release %d bad"
 					"offset %zd, size %zd\n", debug_id, *offp, buffer->data_size);
 			continue;
-- 
GitLab


From 282ca175d4c440ec4d74bc622ee497e5b3530ce5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:57 -0700
Subject: [PATCH 0442/1421] Staging: binder: Keep a reference to the
 files_struct while the driver is mmapped
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This prevents breaking fget_light if a single threaded application
allows incoming file descriptors (in replies or on nodes).
Should also prevent inserting a file in the wrong files_struct if the
receving process execs in the middle of a transaction (between
task_get_unused_fd_flags and task_fd_install).

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 79 +++++++++++++++++++++++++-------
 1 file changed, 63 insertions(+), 16 deletions(-)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 64f95ee8a70..09962e87c60 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -41,6 +41,8 @@ static int binder_last_id;
 static struct proc_dir_entry *binder_proc_dir_entry_root;
 static struct proc_dir_entry *binder_proc_dir_entry_proc;
 static struct hlist_head binder_dead_nodes;
+static HLIST_HEAD(binder_release_files_list);
+static DEFINE_MUTEX(binder_release_files_lock);
 
 static int binder_read_proc_proc(
 	char *page, char **start, off_t off, int count, int *eof, void *data);
@@ -241,6 +243,8 @@ struct binder_proc {
 	int pid;
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
+	struct files_struct *files;
+	struct hlist_node release_files_node;
 	void *buffer;
 	size_t user_buffer_offset;
 
@@ -309,9 +313,9 @@ struct binder_transaction {
 /*
  * copied from get_unused_fd_flags
  */
-int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
+int task_get_unused_fd_flags(struct binder_proc *proc, int flags)
 {
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	int fd, error;
 	struct fdtable *fdt;
 	unsigned long rlim_cur;
@@ -333,9 +337,9 @@ repeat:
 	 * will limit the total number of files that can be opened.
 	 */
 	rlim_cur = 0;
-	if (lock_task_sighand(tsk, &irqs)) {
-		rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		unlock_task_sighand(tsk, &irqs);
+	if (lock_task_sighand(proc->tsk, &irqs)) {
+		rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+		unlock_task_sighand(proc->tsk, &irqs);
 	}
 	if (fd >= rlim_cur)
 		goto out;
@@ -371,7 +375,6 @@ repeat:
 
 out:
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 	return error;
 }
 
@@ -379,9 +382,9 @@ out:
  * copied from fd_install
  */
 static void task_fd_install(
-	struct task_struct *tsk, unsigned int fd, struct file *file)
+	struct binder_proc *proc, unsigned int fd, struct file *file)
 {
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	struct fdtable *fdt;
 
 	if (files == NULL)
@@ -392,7 +395,6 @@ static void task_fd_install(
 	BUG_ON(fdt->fd[fd] != NULL);
 	rcu_assign_pointer(fdt->fd[fd], file);
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 }
 
 /*
@@ -409,10 +411,10 @@ static void __put_unused_fd(struct files_struct *files, unsigned int fd)
 /*
  * copied from sys_close
  */
-static long task_close_fd(struct task_struct *tsk, unsigned int fd)
+static long task_close_fd(struct binder_proc *proc, unsigned int fd)
 {
 	struct file *filp;
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	struct fdtable *fdt;
 	int retval;
 
@@ -439,12 +441,10 @@ static long task_close_fd(struct task_struct *tsk, unsigned int fd)
 		     retval == -ERESTART_RESTARTBLOCK))
 		retval = -EINTR;
 
-	put_files_struct(files);
 	return retval;
 
 out_unlock:
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 	return -EBADF;
 }
 
@@ -1549,13 +1549,13 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
 				return_error = BR_FAILED_REPLY;
 				goto err_fget_failed;
 			}
-			target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC);
+			target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC);
 			if (target_fd < 0) {
 				fput(file);
 				return_error = BR_FAILED_REPLY;
 				goto err_get_unused_fd_failed;
 			}
-			task_fd_install(target_proc->tsk, target_fd, file);
+			task_fd_install(target_proc, target_fd, file);
 			if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
 				printk(KERN_INFO "        fd %ld -> %d\n", fp->handle, target_fd);
 			/* TODO: fput? */
@@ -1698,7 +1698,7 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer
 			if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
 				printk(KERN_INFO "        fd %ld\n", fp->handle);
 			if (failed_at)
-				task_close_fd(proc->tsk, fp->handle);
+				task_close_fd(proc, fp->handle);
 			break;
 
 		default:
@@ -2663,6 +2663,34 @@ static void binder_vma_open(struct vm_area_struct *vma)
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	dump_stack();
 }
+
+static void binder_release_files(struct work_struct *work)
+{
+	struct binder_proc *proc;
+	struct files_struct *files;
+	do {
+		mutex_lock(&binder_lock);
+		mutex_lock(&binder_release_files_lock);
+		if (!hlist_empty(&binder_release_files_list)) {
+			proc = hlist_entry(binder_release_files_list.first,
+					struct binder_proc, release_files_node);
+			hlist_del_init(&proc->release_files_node);
+			files = proc->files;
+			if (files)
+				proc->files = NULL;
+		} else {
+			proc = NULL;
+			files = NULL;
+		}
+		mutex_unlock(&binder_release_files_lock);
+		mutex_unlock(&binder_lock);
+		if (files)
+			put_files_struct(files);
+	} while (proc);
+}
+
+static DECLARE_WORK(binder_release_files_work, binder_release_files);
+
 static void binder_vma_close(struct vm_area_struct *vma)
 {
 	struct binder_proc *proc = vma->vm_private_data;
@@ -2673,6 +2701,13 @@ static void binder_vma_close(struct vm_area_struct *vma)
 			(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	proc->vma = NULL;
+	mutex_lock(&binder_release_files_lock);
+	if (proc->files) {
+		hlist_add_head(&proc->release_files_node,
+				&binder_release_files_list);
+		schedule_work(&binder_release_files_work);
+	}
+	mutex_unlock(&binder_release_files_lock);
 }
 
 static struct vm_operations_struct binder_vm_ops = {
@@ -2751,6 +2786,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 	binder_insert_free_buffer(proc, buffer);
 	proc->free_async_space = proc->buffer_size / 2;
 	barrier();
+	proc->files = get_files_struct(current);
 	proc->vma = vma;
 
 	/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
@@ -2831,6 +2867,7 @@ static int binder_release(struct inode *nodp, struct file *filp)
 	struct hlist_node *pos;
 	struct binder_transaction *t;
 	struct rb_node *n;
+	struct files_struct *files;
 	struct binder_proc *proc = filp->private_data;
 	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
 
@@ -2840,6 +2877,14 @@ static int binder_release(struct inode *nodp, struct file *filp)
 		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 	}
 	mutex_lock(&binder_lock);
+	mutex_lock(&binder_release_files_lock);
+	if (!hlist_unhashed(&proc->release_files_node))
+		hlist_del(&proc->release_files_node);
+	files = proc->files;
+	if (files)
+		proc->files = NULL;
+	mutex_unlock(&binder_release_files_lock);
+
 	hlist_del(&proc->proc_node);
 	if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
 		if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
@@ -2937,6 +2982,8 @@ static int binder_release(struct inode *nodp, struct file *filp)
 		       proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
 
 	kfree(proc);
+	if (files)
+		put_files_struct(files);
 	return 0;
 }
 
-- 
GitLab


From 7af7467efa64affc6505375ceac97d68cfb58e94 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:58 -0700
Subject: [PATCH 0443/1421] Staging: binder: Cast to uintptr_t instead of
 size_t when aligning pointers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 09962e87c60..91a96292e6b 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -246,7 +246,7 @@ struct binder_proc {
 	struct files_struct *files;
 	struct hlist_node release_files_node;
 	void *buffer;
-	size_t user_buffer_offset;
+	ptrdiff_t user_buffer_offset;
 
 	struct list_head buffers;
 	struct rb_root free_buffers;
@@ -614,7 +614,8 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate,
 			       proc->pid, page_addr);
 			goto err_map_kernel_failed;
 		}
-		user_page_addr = (size_t)page_addr + proc->user_buffer_offset;
+		user_page_addr =
+			(uintptr_t)page_addr + proc->user_buffer_offset;
 		ret = vm_insert_page(vma, user_page_addr, page[0]);
 		if (ret) {
 			printk(KERN_ERR "binder: %d: binder_alloc_buf failed "
@@ -635,7 +636,7 @@ free_range:
 	     page_addr -= PAGE_SIZE) {
 		page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
 		if (vma)
-			zap_page_range(vma, (size_t)page_addr +
+			zap_page_range(vma, (uintptr_t)page_addr +
 				proc->user_buffer_offset, PAGE_SIZE, NULL);
 err_vm_insert_page_failed:
 		unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
@@ -716,18 +717,19 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc,
 		       "er %p size %zd\n", proc->pid, size, buffer, buffer_size);
 
 	has_page_addr =
-		(void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK);
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
 	if (n == NULL) {
 		if (size + sizeof(struct binder_buffer) + 4 >= buffer_size)
 			buffer_size = size; /* no room for other buffers */
 		else
 			buffer_size = size + sizeof(struct binder_buffer);
 	}
-	end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size);
+	end_page_addr =
+		(void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size);
 	if (end_page_addr > has_page_addr)
 		end_page_addr = has_page_addr;
 	if (binder_update_page_range(proc, 1,
-	    (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL))
+	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL))
 		return NULL;
 
 	rb_erase(best_fit, &proc->free_buffers);
@@ -758,12 +760,12 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc,
 
 static void *buffer_start_page(struct binder_buffer *buffer)
 {
-	return (void *)((size_t)buffer & PAGE_MASK);
+	return (void *)((uintptr_t)buffer & PAGE_MASK);
 }
 
 static void *buffer_end_page(struct binder_buffer *buffer)
 {
-	return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK);
+	return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
 }
 
 static void binder_delete_free_buffer(
@@ -841,8 +843,8 @@ static void binder_free_buf(
 	}
 
 	binder_update_page_range(proc, 0,
-		(void *)PAGE_ALIGN((size_t)buffer->data),
-		(void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK),
+		(void *)PAGE_ALIGN((uintptr_t)buffer->data),
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
 		NULL);
 	rb_erase(&buffer->rb_node, &proc->allocated_buffers);
 	buffer->free = 1;
@@ -2347,7 +2349,7 @@ retry:
 
 		tr.data_size = t->buffer->data_size;
 		tr.offsets_size = t->buffer->offsets_size;
-		tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset);
+		tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
 		tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
 
 		if (put_user(cmd, (uint32_t __user *)ptr))
@@ -2753,7 +2755,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
 		goto err_get_vm_area_failed;
 	}
 	proc->buffer = area->addr;
-	proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer;
+	proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
 
 #ifdef CONFIG_CPU_CACHE_VIPT
 	if (cache_is_vipt_aliasing()) {
-- 
GitLab


From 0cf24a7dc9123ddf63c413b6d4b38017b19db713 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:12:59 -0700
Subject: [PATCH 0444/1421] Staging: binder: Prevent the wrong thread from
 adding a transaction to the stack.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

If a thread is part of a transaction stack, it is only allowed to make
another call if it was the target of the top transaction on the stack.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 91a96292e6b..b0127a3290d 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -1343,6 +1343,17 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread,
 		if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
 			struct binder_transaction *tmp;
 			tmp = thread->transaction_stack;
+			if (tmp->to_thread != thread) {
+				binder_user_error("binder: %d:%d got new "
+					"transaction with bad transaction stack"
+					", transaction %d has target %d:%d\n",
+					proc->pid, thread->pid, tmp->debug_id,
+					tmp->to_proc ? tmp->to_proc->pid : 0,
+					tmp->to_thread ?
+					tmp->to_thread->pid : 0);
+				return_error = BR_FAILED_REPLY;
+				goto err_bad_call_stack;
+			}
 			while (tmp) {
 				if (tmp->from && tmp->from->proc == target_proc)
 					target_thread = tmp->from;
-- 
GitLab


From 861a0dcc397f3e94024cc311086799393ec517df Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= <arve@android.com>
Date: Mon, 6 Apr 2009 15:13:00 -0700
Subject: [PATCH 0445/1421] Staging: binder: Defer flush and release operations
 to avoid deadlocks.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

If a transaction that contains a file descriptor fails on a later object,
the new file descriptor needs to be closed. If this is a binder file
descriptor we would deadlock in flush. If there were no other references to
the file at this point release would also be called.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/android/binder.c | 149 ++++++++++++++++++-------------
 1 file changed, 88 insertions(+), 61 deletions(-)

diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index b0127a3290d..299d29d1dad 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -41,8 +41,8 @@ static int binder_last_id;
 static struct proc_dir_entry *binder_proc_dir_entry_root;
 static struct proc_dir_entry *binder_proc_dir_entry_proc;
 static struct hlist_head binder_dead_nodes;
-static HLIST_HEAD(binder_release_files_list);
-static DEFINE_MUTEX(binder_release_files_lock);
+static HLIST_HEAD(binder_deferred_list);
+static DEFINE_MUTEX(binder_deferred_lock);
 
 static int binder_read_proc_proc(
 	char *page, char **start, off_t off, int count, int *eof, void *data);
@@ -234,6 +234,12 @@ struct binder_buffer {
 	uint8_t data[0];
 };
 
+enum {
+	BINDER_DEFERRED_PUT_FILES    = 0x01,
+	BINDER_DEFERRED_FLUSH        = 0x02,
+	BINDER_DEFERRED_RELEASE      = 0x04,
+};
+
 struct binder_proc {
 	struct hlist_node proc_node;
 	struct rb_root threads;
@@ -244,7 +250,8 @@ struct binder_proc {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
 	struct files_struct *files;
-	struct hlist_node release_files_node;
+	struct hlist_node deferred_work_node;
+	int deferred_work;
 	void *buffer;
 	ptrdiff_t user_buffer_offset;
 
@@ -310,6 +317,8 @@ struct binder_transaction {
 	uid_t	sender_euid;
 };
 
+static void binder_defer_work(struct binder_proc *proc, int defer);
+
 /*
  * copied from get_unused_fd_flags
  */
@@ -2677,33 +2686,6 @@ static void binder_vma_open(struct vm_area_struct *vma)
 	dump_stack();
 }
 
-static void binder_release_files(struct work_struct *work)
-{
-	struct binder_proc *proc;
-	struct files_struct *files;
-	do {
-		mutex_lock(&binder_lock);
-		mutex_lock(&binder_release_files_lock);
-		if (!hlist_empty(&binder_release_files_list)) {
-			proc = hlist_entry(binder_release_files_list.first,
-					struct binder_proc, release_files_node);
-			hlist_del_init(&proc->release_files_node);
-			files = proc->files;
-			if (files)
-				proc->files = NULL;
-		} else {
-			proc = NULL;
-			files = NULL;
-		}
-		mutex_unlock(&binder_release_files_lock);
-		mutex_unlock(&binder_lock);
-		if (files)
-			put_files_struct(files);
-	} while (proc);
-}
-
-static DECLARE_WORK(binder_release_files_work, binder_release_files);
-
 static void binder_vma_close(struct vm_area_struct *vma)
 {
 	struct binder_proc *proc = vma->vm_private_data;
@@ -2714,13 +2696,7 @@ static void binder_vma_close(struct vm_area_struct *vma)
 			(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	proc->vma = NULL;
-	mutex_lock(&binder_release_files_lock);
-	if (proc->files) {
-		hlist_add_head(&proc->release_files_node,
-				&binder_release_files_list);
-		schedule_work(&binder_release_files_work);
-	}
-	mutex_unlock(&binder_release_files_lock);
+	binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES);
 }
 
 static struct vm_operations_struct binder_vm_ops = {
@@ -2853,11 +2829,17 @@ static int binder_open(struct inode *nodp, struct file *filp)
 
 static int binder_flush(struct file *filp, fl_owner_t id)
 {
-	struct rb_node *n;
 	struct binder_proc *proc = filp->private_data;
-	int wake_count = 0;
 
-	mutex_lock(&binder_lock);
+	binder_defer_work(proc, BINDER_DEFERRED_FLUSH);
+
+	return 0;
+}
+
+static void binder_deferred_flush(struct binder_proc *proc)
+{
+	struct rb_node *n;
+	int wake_count = 0;
 	for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) {
 		struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node);
 		thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN;
@@ -2867,36 +2849,34 @@ static int binder_flush(struct file *filp, fl_owner_t id)
 		}
 	}
 	wake_up_interruptible_all(&proc->wait);
-	mutex_unlock(&binder_lock);
 
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
 		printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count);
-
-	return 0;
 }
 
 static int binder_release(struct inode *nodp, struct file *filp)
 {
-	struct hlist_node *pos;
-	struct binder_transaction *t;
-	struct rb_node *n;
-	struct files_struct *files;
 	struct binder_proc *proc = filp->private_data;
-	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
-
 	if (binder_proc_dir_entry_proc) {
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
 		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 	}
-	mutex_lock(&binder_lock);
-	mutex_lock(&binder_release_files_lock);
-	if (!hlist_unhashed(&proc->release_files_node))
-		hlist_del(&proc->release_files_node);
-	files = proc->files;
-	if (files)
-		proc->files = NULL;
-	mutex_unlock(&binder_release_files_lock);
+
+	binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
+
+	return 0;
+}
+
+static void binder_deferred_release(struct binder_proc *proc)
+{
+	struct hlist_node *pos;
+	struct binder_transaction *t;
+	struct rb_node *n;
+	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
+
+	BUG_ON(proc->vma);
+	BUG_ON(proc->files);
 
 	hlist_del(&proc->proc_node);
 	if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
@@ -2971,7 +2951,6 @@ static int binder_release(struct inode *nodp, struct file *filp)
 	}
 
 	binder_stats.obj_deleted[BINDER_STAT_PROC]++;
-	mutex_unlock(&binder_lock);
 
 	page_count = 0;
 	if (proc->pages) {
@@ -2995,9 +2974,57 @@ static int binder_release(struct inode *nodp, struct file *filp)
 		       proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
 
 	kfree(proc);
-	if (files)
-		put_files_struct(files);
-	return 0;
+}
+
+static void binder_deferred_func(struct work_struct *work)
+{
+	struct binder_proc *proc;
+	struct files_struct *files;
+
+	int defer;
+	do {
+		mutex_lock(&binder_lock);
+		mutex_lock(&binder_deferred_lock);
+		if (!hlist_empty(&binder_deferred_list)) {
+			proc = hlist_entry(binder_deferred_list.first,
+					struct binder_proc, deferred_work_node);
+			hlist_del_init(&proc->deferred_work_node);
+			defer = proc->deferred_work;
+			proc->deferred_work = 0;
+		} else {
+			proc = NULL;
+			defer = 0;
+		}
+		mutex_unlock(&binder_deferred_lock);
+
+		files = NULL;
+		if (defer & BINDER_DEFERRED_PUT_FILES)
+			if ((files = proc->files))
+				proc->files = NULL;
+
+		if (defer & BINDER_DEFERRED_FLUSH)
+			binder_deferred_flush(proc);
+
+		if (defer & BINDER_DEFERRED_RELEASE)
+			binder_deferred_release(proc); /* frees proc */
+
+		mutex_unlock(&binder_lock);
+		if (files)
+			put_files_struct(files);
+	} while (proc);
+}
+static DECLARE_WORK(binder_deferred_work, binder_deferred_func);
+
+static void binder_defer_work(struct binder_proc *proc, int defer)
+{
+	mutex_lock(&binder_deferred_lock);
+	proc->deferred_work |= defer;
+	if (hlist_unhashed(&proc->deferred_work_node)) {
+		hlist_add_head(&proc->deferred_work_node,
+				&binder_deferred_list);
+		schedule_work(&binder_deferred_work);
+	}
+	mutex_unlock(&binder_deferred_lock);
 }
 
 static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
-- 
GitLab


From d203eea8db0b4acbd19ade1aa025ad9b9e0d8863 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Mon, 6 Apr 2009 15:15:55 +0200
Subject: [PATCH 0446/1421] Staging: STLC45XX should depend on GENERIC_HARDIRQS

m68k allmodconfig:
| drivers/staging/stlc45xx/stlc45xx.c: In function 'stlc45xx_probe':
| drivers/staging/stlc45xx/stlc45xx.c:2456: error: implicit declaration of function 'set_irq_type'
| make[6]: *** [drivers/staging/stlc45xx/stlc45xx.o] Error 1

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/stlc45xx/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig
index 8d3f46f190e..947fb75a9c6 100644
--- a/drivers/staging/stlc45xx/Kconfig
+++ b/drivers/staging/stlc45xx/Kconfig
@@ -1,6 +1,6 @@
 config STLC45XX
 	tristate "stlc4550/4560 support"
-	depends on MAC80211 && WLAN_80211 && SPI_MASTER
+	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
 	---help---
 	  This is a driver for stlc4550 and stlc4560 chipsets.
 
-- 
GitLab


From f7ed550b3ecab4a14f78019ff3e8899add607f92 Mon Sep 17 00:00:00 2001
From: Lior Dotan <liodot@gmail.com>
Date: Wed, 11 Feb 2009 13:35:10 +0200
Subject: [PATCH 0447/1421] Revert Staging: SLICOSS: use gfp_kernel where
 possible

Revert commit 2bb347361e2c19799431f56488a3f64de40a3aa6

This commit has been reported to cause problems:
  Mar 24 11:50:31 linuxdev kernel: BUG: sleeping function called from invalid context at mm/slub.c:1599 Mar 24 11:50:31 linuxdev kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 3251, name: avahi-daemon

Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/slicoss/slicoss.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 79b3d1f1eff..6f5d0bff435 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -1267,7 +1267,7 @@ static int slic_mcast_add_list(struct adapter *adapter, char *address)
 	}
 
 	/* Doesn't already exist.  Allocate a structure to hold it */
-	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
+	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
 	if (mcaddr == NULL)
 		return 1;
 
@@ -2291,7 +2291,7 @@ static u32 slic_card_locate(struct adapter *adapter)
 	}
 	if (!physcard) {
 		/* no structure allocated for this physical card yet */
-		physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
+		physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
 		ASSERT(physcard);
 
 		physcard->next = slic_global.phys_card;
-- 
GitLab


From 288a9a8955cd28bf6a0f48ec821cf9028e96081b Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:18 +0300
Subject: [PATCH 0448/1421] Staging: pohmelfs: Populate dentry cache when
 receiving the new readdir entry.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/net.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c
index c9b8540c1ef..93a5921c36f 100644
--- a/drivers/staging/pohmelfs/net.c
+++ b/drivers/staging/pohmelfs/net.c
@@ -450,8 +450,24 @@ static int pohmelfs_readdir_response(struct netfs_state *st)
 			if (err != -EEXIST)
 				goto err_out_put;
 		} else {
+			struct dentry *dentry, *alias, *pd;
+
 			set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
 			clear_bit(NETFS_INODE_OWNED, &npi->state);
+
+			pd = d_find_alias(&parent->vfs_inode);
+			if (pd) {
+				str.hash = full_name_hash(str.name, str.len);
+				dentry = d_alloc(pd, &str);
+				if (dentry) {
+					alias = d_materialise_unique(dentry, &npi->vfs_inode);
+					if (alias)
+						dput(dentry);
+				}
+
+				dput(dentry);
+				dput(pd);
+			}
 		}
 	}
 out:
-- 
GitLab


From f3b8fa701b4bd8ec6d378896ad005f01e8382381 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:19 +0300
Subject: [PATCH 0449/1421] Staging: Pohmelfs: Move parent lock to the place
 where we really have to send a lookup request to the server.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/dir.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index 7a41183a32e..26da75ca1f5 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -389,11 +389,11 @@ static int pohmelfs_readdir(struct file *file, void *dirent, filldir_t filldir)
 	dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
 			__func__, pi->ino, (u64)file->f_pos,
 			(unsigned long)file->private_data);
-
+#if 0
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-
+#endif
 	err = pohmelfs_sync_remote_dir(pi);
 	if (err)
 		return err;
@@ -513,10 +513,6 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 
 	need_lock = pohmelfs_need_lock(parent, lock_type);
 
-	err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
-	if (err)
-		goto out;
-
 	str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
 
 	mutex_lock(&parent->offset_lock);
@@ -525,7 +521,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 		ino = n->ino;
 	mutex_unlock(&parent->offset_lock);
 
-	dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
+	dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
 			__func__, ino, inode, str.name, str.hash, parent->state);
 
 	if (ino) {
@@ -534,7 +530,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 			goto out;
 	}
 
-	dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
+	dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
 			__func__, dir, parent->ino,
 			str.name, str.len, parent->state, ino);
 
@@ -543,6 +539,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 			goto out;
 	}
 
+	err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
+	if (err)
+		goto out;
+
 	err = pohmelfs_lookup_single(parent, &str, ino);
 	if (err)
 		goto out;
-- 
GitLab


From 86ac7253e81b47808f2702596efdfcbfb1a62372 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:20 +0300
Subject: [PATCH 0450/1421] Staging: Pohmelfs: Disable read lock in
 pohmelfs_getattr().

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/inode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 5bf16504cd6..a19e532039e 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1171,11 +1171,11 @@ static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct
 	struct inode *inode = dentry->d_inode;
 	struct pohmelfs_inode *pi = POHMELFS_I(inode);
 	int err;
-
+#if 0
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-
+#endif
 	dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
 			__func__, pi->ino, inode->i_mode, inode->i_uid,
 			inode->i_gid, inode->i_size);
-- 
GitLab


From b522efdd6f8ab8eaae8c8aa984ab7f06a08bcc8e Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:21 +0300
Subject: [PATCH 0451/1421] Staging: Pohmelfs: Added 'need_lock' variable into
 debug print.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/dir.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index 26da75ca1f5..c99d91b2722 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -521,8 +521,8 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 		ino = n->ino;
 	mutex_unlock(&parent->offset_lock);
 
-	dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
-			__func__, ino, inode, str.name, str.hash, parent->state);
+	dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
+			__func__, ino, inode, str.name, str.hash, parent->state, need_lock);
 
 	if (ino) {
 		inode = ilookup(dir->i_sb, ino);
-- 
GitLab


From 872dc5e500cc25e3c35d83510dfbd6fb8d78221b Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:22 +0300
Subject: [PATCH 0452/1421] Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED
 and clear NETFS_INODE_OWNED bits in the root inode.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/inode.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index a19e532039e..00570d9c265 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1845,6 +1845,8 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
 		err = PTR_ERR(npi);
 		goto err_out_crypto_exit;
 	}
+	set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
+	clear_bit(NETFS_INODE_OWNED, &npi->state);
 
 	root = &npi->vfs_inode;
 
-- 
GitLab


From e504342448375ffd73dec2b540a5aaf5da6f8439 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:23 +0300
Subject: [PATCH 0453/1421] Staging: Pohmelfs: Extend remount option.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/inode.c | 73 ++++++++++++++++++++------------
 1 file changed, 46 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 00570d9c265..3fef09fd712 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1169,16 +1169,17 @@ err_out_put:
 static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
 {
 	struct inode *inode = dentry->d_inode;
+#if 0
 	struct pohmelfs_inode *pi = POHMELFS_I(inode);
 	int err;
-#if 0
+
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-#endif
 	dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
 			__func__, pi->ino, inode->i_mode, inode->i_uid,
 			inode->i_gid, inode->i_size);
+#endif
 
 	generic_fillattr(inode, stat);
 	return 0;
@@ -1346,12 +1347,6 @@ static void pohmelfs_put_super(struct super_block *sb)
 	pohmelfs_ftrans_exit();
 }
 
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
-	*flags |= MS_RDONLY;
-	return 0;
-}
-
 static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct super_block *sb = dentry->d_sb;
@@ -1394,42 +1389,33 @@ static int pohmelfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	return 0;
 }
 
-static const struct super_operations pohmelfs_sb_ops = {
-	.alloc_inode	= pohmelfs_alloc_inode,
-	.destroy_inode	= pohmelfs_destroy_inode,
-	.drop_inode	= pohmelfs_drop_inode,
-	.write_inode	= pohmelfs_write_inode,
-	.put_super	= pohmelfs_put_super,
-	.remount_fs	= pohmelfs_remount,
-	.statfs		= pohmelfs_statfs,
-	.show_options	= pohmelfs_show_options,
-};
-
 enum {
 	pohmelfs_opt_idx,
+	pohmelfs_opt_crypto_thread_num,
+	pohmelfs_opt_trans_max_pages,
+	pohmelfs_opt_crypto_fail_unsupported,
+
+	/* Remountable options */
 	pohmelfs_opt_trans_scan_timeout,
 	pohmelfs_opt_drop_scan_timeout,
 	pohmelfs_opt_wait_on_page_timeout,
 	pohmelfs_opt_trans_retries,
-	pohmelfs_opt_crypto_thread_num,
-	pohmelfs_opt_trans_max_pages,
-	pohmelfs_opt_crypto_fail_unsupported,
 	pohmelfs_opt_mcache_timeout,
 };
 
 static struct match_token pohmelfs_tokens[] = {
 	{pohmelfs_opt_idx, "idx=%u"},
+	{pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
+	{pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
+	{pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
 	{pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
 	{pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
 	{pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
 	{pohmelfs_opt_trans_retries, "trans_retries=%u"},
-	{pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
-	{pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
-	{pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
 	{pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
 };
 
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
+static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
 {
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
@@ -1449,6 +1435,9 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
 		if (err)
 			return err;
 
+		if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
+			continue;
+
 		switch (token) {
 			case pohmelfs_opt_idx:
 				psb->idx = option;
@@ -1485,6 +1474,25 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
 	return 0;
 }
 
+static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
+{
+	int err;
+	struct pohmelfs_sb *psb = POHMELFS_SB(sb);
+	unsigned long old_sb_flags = sb->s_flags;
+
+	err = pohmelfs_parse_options(data, psb, 1);
+	if (err)
+		goto err_out_restore;
+
+	if (!(*flags & MS_RDONLY))
+		sb->s_flags &= ~MS_RDONLY;
+	return 0;
+
+err_out_restore:
+	sb->s_flags = old_sb_flags;
+	return err;
+}
+
 static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
 {
 	struct inode *inode = &pi->vfs_inode;
@@ -1753,6 +1761,17 @@ err_out_exit:
 	return err;
 }
 
+static const struct super_operations pohmelfs_sb_ops = {
+	.alloc_inode	= pohmelfs_alloc_inode,
+	.destroy_inode	= pohmelfs_destroy_inode,
+	.drop_inode	= pohmelfs_drop_inode,
+	.write_inode	= pohmelfs_write_inode,
+	.put_super	= pohmelfs_put_super,
+	.remount_fs	= pohmelfs_remount,
+	.statfs		= pohmelfs_statfs,
+	.show_options	= pohmelfs_show_options,
+};
+
 /*
  * Allocate private superblock and create root dir.
  */
@@ -1816,7 +1835,7 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
 	mutex_init(&psb->state_lock);
 	INIT_LIST_HEAD(&psb->state_list);
 
-	err = pohmelfs_parse_options((char *) data, psb);
+	err = pohmelfs_parse_options((char *) data, psb, 0);
 	if (err)
 		goto err_out_free_sb;
 
-- 
GitLab


From cee9bb2ebdc1697f9be7ee5bdd6867daaa712179 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:24 +0300
Subject: [PATCH 0454/1421] Staging: Pohmelfs: Sync fs before killing it, since
 dentry cache is shrunk before writeback is invoked via
 generic_shutdown_super()

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/inode.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 3fef09fd712..af99f6620b7 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1908,11 +1908,29 @@ static int pohmelfs_get_sb(struct file_system_type *fs_type,
 				mnt);
 }
 
+/*
+ * We need this to sync all inodes earlier, since when writeback
+ * is invoked from the umount/mntput path dcache is already shrunk,
+ * see generic_shutdown_super(), and no inodes can access the path.
+ */
+static void pohmelfs_kill_super(struct super_block *sb)
+{
+	struct writeback_control wbc = {
+		.sync_mode	= WB_SYNC_ALL,
+		.range_start	= 0,
+		.range_end	= LLONG_MAX,
+		.nr_to_write	= LONG_MAX,
+	};
+	generic_sync_sb_inodes(sb, &wbc);
+
+	kill_anon_super(sb);
+}
+
 static struct file_system_type pohmel_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "pohmel",
 	.get_sb		= pohmelfs_get_sb,
-	.kill_sb 	= kill_anon_super,
+	.kill_sb 	= pohmelfs_kill_super,
 };
 
 /*
-- 
GitLab


From d1ec64409bf6fed877d0e55e23587b2b6f5d7d58 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:25 +0300
Subject: [PATCH 0455/1421] Staging: Pohmelfs: Reduce debugging noise about
 non-existing objects.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/dir.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index c99d91b2722..10d21a49d28 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -557,10 +557,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct
 
 	if (ino) {
 		inode = ilookup(dir->i_sb, ino);
-		printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
+		dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
 				__func__, ino, inode, str.name, str.hash);
 		if (!inode) {
-			printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
+			dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
 				__func__, ino, str.name, str.hash);
 			//return NULL;
 			return ERR_PTR(-EACCES);
-- 
GitLab


From b82ba780a769a2735c86b5197457972a7df0af08 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:26 +0300
Subject: [PATCH 0456/1421] Staging: Pohmelfs: Use wait_on_page_timeout when
 waiting for remote directory sync instead of hardcoded 25 seconds.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index 10d21a49d28..b5799842fb8 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -328,7 +328,7 @@ static int pohmelfs_sync_remote_dir(struct pohmelfs_inode *pi)
 {
 	struct inode *inode = &pi->vfs_inode;
 	struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
-	long ret = msecs_to_jiffies(25000);
+	long ret = psb->wait_on_page_timeout;
 	int err;
 
 	dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
-- 
GitLab


From 50e4babfb0c36f1665ffcdc9a1826021aedb173f Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:27 +0300
Subject: [PATCH 0457/1421] Staging: Pohmelfs: Drop ftrans debugging code.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/inode.c |  4 ---
 drivers/staging/pohmelfs/net.c   | 56 ++------------------------------
 drivers/staging/pohmelfs/netfs.h |  6 ----
 drivers/staging/pohmelfs/trans.c |  2 --
 4 files changed, 2 insertions(+), 66 deletions(-)

diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index af99f6620b7..a12fcc6c72b 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1343,8 +1343,6 @@ static void pohmelfs_put_super(struct super_block *sb)
 
 	kfree(psb);
 	sb->s_fs_info = NULL;
-
-	pohmelfs_ftrans_exit();
 }
 
 static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -1783,8 +1781,6 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent)
 	struct pohmelfs_inode *npi;
 	struct qstr str;
 
-	pohmelfs_ftrans_init();
-
 	psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
 	if (!psb)
 		goto err_out_exit;
diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c
index 93a5921c36f..11ecac026ca 100644
--- a/drivers/staging/pohmelfs/net.c
+++ b/drivers/staging/pohmelfs/net.c
@@ -26,55 +26,6 @@
 
 #include "netfs.h"
 
-static int pohmelfs_ftrans_size = 10240;
-static u32 *pohmelfs_ftrans;
-
-int pohmelfs_ftrans_init(void)
-{
-	pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4);
-	if (!pohmelfs_ftrans)
-		return -ENOMEM;
-
-	return 0;
-}
-
-void pohmelfs_ftrans_exit(void)
-{
-	vfree(pohmelfs_ftrans);
-}
-
-void pohmelfs_ftrans_clean(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		pohmelfs_ftrans[idx] = 0;
-	}
-}
-
-void pohmelfs_ftrans_update(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		pohmelfs_ftrans[idx] = i;
-	}
-}
-
-int pohmelfs_ftrans_check(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		return (pohmelfs_ftrans[idx] == i);
-	}
-
-	return -1;
-}
-
 /*
  * Async machinery lives here.
  * All commands being sent to server do _not_ require sync reply,
@@ -654,15 +605,12 @@ static int pohmelfs_transaction_response(struct netfs_state *st)
 	if (dst) {
 		netfs_trans_remove_nolock(dst, st);
 		t = dst->trans;
-
-		pohmelfs_ftrans_update(cmd->start);
 	}
 	mutex_unlock(&st->trans_lock);
 
 	if (!t) {
-		int check = pohmelfs_ftrans_check(cmd->start);
-		printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n",
-				__func__, cmd->start, cmd->id, cmd->size, cmd->ext, check);
+		printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
+				__func__, cmd->start, cmd->id, cmd->size, cmd->ext);
 		err = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index 2ff21ae5bb1..59f81cbf388 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -921,12 +921,6 @@ static inline void pohmelfs_mcache_put(struct pohmelfs_sb *psb,
 		pohmelfs_mcache_free(psb, m);
 }
 
-int pohmelfs_ftrans_init(void);
-void pohmelfs_ftrans_exit(void);
-void pohmelfs_ftrans_update(u64 id);
-int pohmelfs_ftrans_check(u64 id);
-void pohmelfs_ftrans_clean(u64 id);
-
 #endif /* __KERNEL__*/
 
 #endif /* __NETFS_H */
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index bcb59425a21..b89f9f36b35 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -501,8 +501,6 @@ int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb)
 
 	t->gen = atomic_inc_return(&psb->trans_gen);
 
-	pohmelfs_ftrans_clean(t->gen);
-
 	cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
 		t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
 	cmd->cmd = NETFS_TRANS;
-- 
GitLab


From f2739de19176009b14475207d5418cd79e7f0ba3 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:28 +0300
Subject: [PATCH 0458/1421] Staging: Pohmelfs: Added ->show_stats() callback.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/inode.c | 40 ++++++++++++++++++++++++++++++++
 drivers/staging/pohmelfs/netfs.h | 14 +++++++----
 2 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index a12fcc6c72b..b2eaf904726 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1759,6 +1759,45 @@ err_out_exit:
 	return err;
 }
 
+static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
+{
+	struct netfs_state *st;
+	struct pohmelfs_ctl *ctl;
+	struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb);
+	struct pohmelfs_config *c;
+
+	mutex_lock(&psb->state_lock);
+
+	seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
+
+	list_for_each_entry(c, &psb->state_list, config_entry) {
+		st = &c->state;
+		ctl = &st->ctl;
+
+		seq_printf(m, "%u ", ctl->idx);
+		if (ctl->addr.sa_family == AF_INET) {
+			struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
+			//seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+			seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+		} else if (ctl->addr.sa_family == AF_INET6) {
+			struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
+			seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
+		} else {
+			unsigned int i;
+			for (i=0; i<ctl->addrlen; ++i)
+				seq_printf(m, "%02x.", ctl->addr.addr[i]);
+		}
+
+		seq_printf(m, " %u %u %d %u %x\n",
+				ctl->type, ctl->proto,
+				st->socket != NULL,
+				ctl->prio, ctl->perm);
+	}
+	mutex_unlock(&psb->state_lock);
+
+	return 0;
+}
+
 static const struct super_operations pohmelfs_sb_ops = {
 	.alloc_inode	= pohmelfs_alloc_inode,
 	.destroy_inode	= pohmelfs_destroy_inode,
@@ -1768,6 +1807,7 @@ static const struct super_operations pohmelfs_sb_ops = {
 	.remount_fs	= pohmelfs_remount,
 	.statfs		= pohmelfs_statfs,
 	.show_options	= pohmelfs_show_options,
+	.show_stats	= pohmelfs_show_stats,
 };
 
 /*
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index 59f81cbf388..7700e2bf3cc 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -116,16 +116,20 @@ struct pohmelfs_crypto
 	unsigned char		data[0];	/* Algorithm string, key and IV */
 };
 
+#define POHMELFS_IO_PERM_READ		(1<<0)
+#define POHMELFS_IO_PERM_WRITE		(1<<1)
+
 /*
  * Configuration command used to create table of different remote servers.
  */
 struct pohmelfs_ctl
 {
-	unsigned int		idx;		/* Config index */
-	unsigned int		type;		/* Socket type */
-	unsigned int		proto;		/* Socket protocol */
-	unsigned int		addrlen;	/* Size of the address */
-	unsigned short		unused;		/* Align structure by 4 bytes */
+	__u32			idx;		/* Config index */
+	__u32			type;		/* Socket type */
+	__u32			proto;		/* Socket protocol */
+	__u16			addrlen;	/* Size of the address */
+	__u16			perm;		/* IO permission */
+	__u16			prio;		/* IO priority */
 	struct saddr		addr;		/* Remote server address */
 };
 
-- 
GitLab


From e0ca87391694dfacd01465d5c01c579c3b8b63e0 Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:29 +0300
Subject: [PATCH 0459/1421] Staging: Pohmelfs: Added IO permissions and
 priorities.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 .../filesystems/pohmelfs/design_notes.txt     |  5 +-
 Documentation/filesystems/pohmelfs/info.txt   | 21 +++++--
 drivers/staging/pohmelfs/config.c             | 61 +++++++++++++++++--
 drivers/staging/pohmelfs/netfs.h              |  1 +
 drivers/staging/pohmelfs/trans.c              | 30 +++------
 5 files changed, 86 insertions(+), 32 deletions(-)

diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index 6d6db60d567..dcf83358716 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -56,9 +56,10 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
index 4e3d5015708..db2e4139362 100644
--- a/Documentation/filesystems/pohmelfs/info.txt
+++ b/Documentation/filesystems/pohmelfs/info.txt
@@ -1,6 +1,8 @@
 POHMELFS usage information.
 
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -52,16 +54,27 @@ mcache_timeout=%u
 
 Usage examples.
 
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
 
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 
diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c
index 3e67da9ea38..a6eaa42fb66 100644
--- a/drivers/staging/pohmelfs/config.c
+++ b/drivers/staging/pohmelfs/config.c
@@ -81,6 +81,45 @@ static struct pohmelfs_config_group *pohmelfs_find_create_config_group(unsigned
 	return g;
 }
 
+static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
+{
+	struct pohmelfs_config *tmp;
+
+	INIT_LIST_HEAD(&dst->config_entry);
+
+	list_for_each_entry(tmp, &psb->state_list, config_entry) {
+		if (dst->state.ctl.prio > tmp->state.ctl.prio)
+			list_add_tail(&dst->config_entry, &tmp->config_entry);
+	}
+	if (list_empty(&dst->config_entry))
+		list_add_tail(&dst->config_entry, &psb->state_list);
+}
+
+static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
+		struct pohmelfs_config *dst, struct pohmelfs_config *new)
+{
+	if ((dst->state.ctl.prio == new->state.ctl.prio) &&
+		(dst->state.ctl.perm == new->state.ctl.perm))
+		return 0;
+
+	dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
+			__func__, dst->state.ctl.prio, dst->state.ctl.perm,
+			new->state.ctl.prio, new->state.ctl.perm);
+	dst->state.ctl.prio = new->state.ctl.prio;
+	dst->state.ctl.perm = new->state.ctl.perm;
+
+	list_del_init(&dst->config_entry);
+	pohmelfs_insert_config_entry(psb, dst);
+	return 0;
+}
+
+/*
+ * pohmelfs_copy_config() is used to copy new state configs from the
+ * config group (controlled by the netlink messages) into the superblock.
+ * This happens either at startup time where no transactions can access
+ * the list of the configs (and thus list of the network states), or at
+ * run-time, where it is protected by the psb->state_lock.
+ */
 int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 {
 	struct pohmelfs_config_group *g;
@@ -103,7 +142,9 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 		err = 0;
 		list_for_each_entry(dst, &psb->state_list, config_entry) {
 			if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
-				err = -EEXIST;
+				err = pohmelfs_move_config_entry(psb, dst, c);
+				if (!err)
+					err = -EEXIST;
 				break;
 			}
 		}
@@ -119,7 +160,7 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 
 		memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
 
-		list_add_tail(&dst->config_entry, &psb->state_list);
+		pohmelfs_insert_config_entry(psb, dst);
 
 		err = pohmelfs_state_init_one(psb, dst);
 		if (err) {
@@ -248,6 +289,13 @@ out_unlock:
         return err;
 }
 
+static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
+{
+	old->perm = new->perm;
+	old->prio = new->prio;
+	return 0;
+}
+
 static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 {
 	struct pohmelfs_config_group *g;
@@ -278,6 +326,9 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 				g->num_entry--;
 				kfree(c);
 				goto out_unlock;
+			} else if (action == POHMELFS_FLAGS_MODIFY) {
+				err = pohmelfs_modify_config(sc, ctl);
+				goto out_unlock;
 			} else {
 				err = -EEXIST;
 				goto out_unlock;
@@ -296,6 +347,7 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 	}
 	memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
 	g->num_entry++;
+
 	list_add_tail(&c->config_entry, &g->config_list);
 
 out_unlock:
@@ -401,10 +453,9 @@ static void pohmelfs_cn_callback(void *data)
 
 	switch (msg->flags) {
 		case POHMELFS_FLAGS_ADD:
-			err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD);
-			break;
 		case POHMELFS_FLAGS_DEL:
-			err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL);
+		case POHMELFS_FLAGS_MODIFY:
+			err = pohmelfs_cn_ctl(msg, msg->flags);
 			break;
 		case POHMELFS_FLAGS_SHOW:
 			err = pohmelfs_cn_disp(msg);
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index 7700e2bf3cc..c78cfcb042f 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -87,6 +87,7 @@ enum {
 	POHMELFS_FLAGS_DEL,     /* Network state control message for DEL */
 	POHMELFS_FLAGS_SHOW,    /* Network state control message for SHOW */
 	POHMELFS_FLAGS_CRYPTO,	/* Crypto data control message */
+	POHMELFS_FLAGS_MODIFY,	/* Network state modification message */
 };
 
 /*
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index b89f9f36b35..168fc8998c3 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -456,34 +456,22 @@ int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb)
 		__func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
 #endif
 	mutex_lock(&psb->state_lock);
-
-	if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) {
-		st = &psb->active_state->state;
-
-		err = -EPIPE;
-		if (netfs_state_poll(st) & POLLOUT) {
-			err = netfs_trans_push_dst(t, st);
-			if (!err) {
-				err = netfs_trans_send(t, st);
-				if (err) {
-					netfs_trans_drop_last(t, st);
-				} else {
-					pohmelfs_switch_active(psb);
-					goto out;
-				}
-			}
-		}
-		pohmelfs_switch_active(psb);
-	}
-
 	list_for_each_entry(c, &psb->state_list, config_entry) {
 		st = &c->state;
 
+		if (t->flags & NETFS_TRANS_SINGLE_DST) {
+			if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
+				continue;
+		} else {
+			if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
+				continue;
+		}
+
 		err = netfs_trans_push(t, st);
 		if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
 			break;
 	}
-out:
+
 	mutex_unlock(&psb->state_lock);
 #if 0
 	dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
-- 
GitLab


From d43f3612818b13f44e12bfc2ad75b4b46628b3da Mon Sep 17 00:00:00 2001
From: Evgeniy Polyakov <zbr@ioremap.net>
Date: Fri, 27 Mar 2009 15:04:30 +0300
Subject: [PATCH 0460/1421] Staging: Pohmelfs: Add load balancing between
 network states with the same priority.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/pohmelfs/lock.c  | 3 ++-
 drivers/staging/pohmelfs/trans.c | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c
index ad4a18559bd..22fef18cae9 100644
--- a/drivers/staging/pohmelfs/lock.c
+++ b/drivers/staging/pohmelfs/lock.c
@@ -41,7 +41,8 @@ static int pohmelfs_send_lock_trans(struct pohmelfs_inode *pi,
 	path_len = err;
 
 	err = -ENOMEM;
-	t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0);
+	t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
+			NETFS_TRANS_SINGLE_DST, 0);
 	if (!t)
 		goto err_out_exit;
 
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index 168fc8998c3..fef5f9bd692 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -467,6 +467,9 @@ int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb)
 				continue;
 		}
 
+		if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio))
+			st = &psb->active_state->state;
+
 		err = netfs_trans_push(t, st);
 		if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
 			break;
-- 
GitLab


From 1f895130c0b0dd293b924b1c6cecac90a2e35dc6 Mon Sep 17 00:00:00 2001
From: Mithlesh Thukral <mithlesh@linsyssoft.com>
Date: Wed, 25 Mar 2009 15:49:58 +0530
Subject: [PATCH 0461/1421] Staging: sxg: Fire watchdog timer at end of open
 routine to change the link

The watchdog timer which updates the link status was not fired at the
end of sxg_entry_open(). Add that.

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/sxg/sxg.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 848d4be85a3..52d2ab97070 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -2254,6 +2254,8 @@ static int sxg_entry_open(struct net_device *dev)
 	DBG_ERROR("sxg: %s EXIT\n", __func__);
 
 	spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
+	mod_timer(&adapter->watchdog_timer, jiffies);
+
 	return STATUS_SUCCESS;
 }
 
-- 
GitLab


From 8d17e6ad8113f7534d978b1b3511f62637483fcc Mon Sep 17 00:00:00 2001
From: Mithlesh Thukral <mithlesh@linsyssoft.com>
Date: Wed, 25 Mar 2009 15:50:34 +0530
Subject: [PATCH 0462/1421] Staging: sxg: Use correct queue_id for transmitting
 non-TCP packets

Use correct queue_id while transmitting non-TCP packets.
They should always use queue 0.

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
---
 drivers/staging/sxg/sxg.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 52d2ab97070..d8edf42ac52 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -2615,7 +2615,9 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
                 struct iphdr *ip;
 
                 ip = ip_hdr(skb);
-		if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+		if (ip->protocol != IPPROTO_TCP	|| !tcp_hdr(skb))
+			queue_id = 0;
+		else if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
 							struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
@@ -2624,8 +2626,10 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 						SXG_LARGE_SEND_QUEUE_MASK));
 		}
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-		if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >=
-						 sizeof(struct tcphdr)) ) {
+		if (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP || !tcp_hdr(skb))
+			queue_id = 0;
+		else if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength
+						>= sizeof(struct tcphdr)) ) {
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
 					SXG_LARGE_SEND_QUEUE_MASK):
-- 
GitLab


From cc4b8dfc3ff32f890cd5de0ce22de44f124d0d05 Mon Sep 17 00:00:00 2001
From: Mithlesh Thukral <mithlesh@linsyssoft.com>
Date: Wed, 25 Mar 2009 15:51:14 +0530
Subject: [PATCH 0463/1421] Staging: sxg: Fix sleep in atomic context warning
 while loading driver

Leave a spinlock before calling request_irq(). request_irq() calls kmalloc
which can sleep. This was generating a warning dump while driver is loaded.

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/sxg/sxg.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index d8edf42ac52..583fbb470e9 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -322,6 +322,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter)
 	int ret,i;
 
 	if (!adapter->intrregistered) {
+		spin_unlock_irqrestore(&sxg_global.driver_lock,
+					sxg_global.flags);
 		for (i=0; i<adapter->nr_msix_entries; i++) {
 			ret = request_irq (adapter->msi_entries[i].vector,
 					sxg_isr,
@@ -329,6 +331,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter)
 					adapter->netdev->name,
 					adapter->netdev);
 			if (ret) {
+				spin_lock_irqsave(&sxg_global.driver_lock,
+						 sxg_global.flags);
 				DBG_ERROR("sxg: MSI-X request_irq (%s) "
 					"FAILED [%x]\n", adapter->netdev->name,
 					 ret);
@@ -336,6 +340,7 @@ int sxg_add_msi_isr(struct adapter_t *adapter)
 			}
 		}
 	}
+	spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
 	adapter->msi_enabled = TRUE;
 	adapter->intrregistered = 1;
 	adapter->IntRegistered = TRUE;
-- 
GitLab


From b824adc9686fb9a6edca164c13107bfed3e41d4e Mon Sep 17 00:00:00 2001
From: Mithlesh Thukral <mithlesh@linsyssoft.com>
Date: Wed, 25 Mar 2009 15:51:49 +0530
Subject: [PATCH 0464/1421] Staging: sxg: Fix leaks and checksum errors in
 transmit code path

Fix the transmit function for the following:
* Free XmtCmd in the error code path. This use to leak memory in
  error conditions.
* Do pci mapping after the checksum operations are over. They can
  reallocate the skb at a different location.
* Fix UDP checksum errors which were seen in wireshark

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/sxg/sxg.c | 93 ++++++++++++++++++++++++---------------
 1 file changed, 58 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 583fbb470e9..076b3f7d39e 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -2582,6 +2582,7 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 	u64 phys_addr;
 	unsigned long flags;
 	unsigned long queue_id=0;
+	int offload_cksum = 0;
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
 		  pSgl, SxgSgl, 0, 0);
@@ -2620,9 +2621,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
                 struct iphdr *ip;
 
                 ip = ip_hdr(skb);
-		if (ip->protocol != IPPROTO_TCP	|| !tcp_hdr(skb))
+		if (ip->protocol == IPPROTO_TCP)
+			offload_cksum = 1;
+		if (!offload_cksum || !tcp_hdr(skb))
 			queue_id = 0;
-		else if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+		else if (offload_cksum && (DataLength >= sizeof(
 							struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
@@ -2631,10 +2634,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 						SXG_LARGE_SEND_QUEUE_MASK));
 		}
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-		if (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP || !tcp_hdr(skb))
+		if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+			offload_cksum = 1;
+		if (!offload_cksum || !tcp_hdr(skb))
 			queue_id = 0;
-		else if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength
-						>= sizeof(struct tcphdr)) ) {
+		else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
 					SXG_LARGE_SEND_QUEUE_MASK):
@@ -2663,23 +2667,38 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 	}
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
 		  XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
-	/* Update stats */
-	adapter->stats.tx_packets++;
-	adapter->stats.tx_bytes += DataLength;
-#if XXXTODO			/* Stats stuff */
-	if (SXG_MULTICAST_PACKET(EtherHdr)) {
-		if (SXG_BROADCAST_PACKET(EtherHdr)) {
-			adapter->Stats.DumbXmtBcastPkts++;
-			adapter->Stats.DumbXmtBcastBytes += DataLength;
+	memset(XmtCmd, '\0', sizeof(*XmtCmd));
+	XmtCmd->SgEntries = 1;
+	XmtCmd->Flags = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		/*
+		 * We need to set the Checkum in IP  header to 0. This is
+		 * required by hardware.
+		 */
+		if (offload_cksum) {
+			ip_hdr(skb)->check = 0x0;
+			XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
+			XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
+			/*
+			 * Dont know if length will require a change in
+			 * case of VLAN
+			 */
+			XmtCmd->CsumFlags.MacLen = ETH_HLEN;
+			XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
+							SXG_NW_HDR_LEN_SHIFT;
 		} else {
-			adapter->Stats.DumbXmtMcastPkts++;
-			adapter->Stats.DumbXmtMcastBytes += DataLength;
+			if (skb_checksum_help(skb)){
+				printk(KERN_EMERG "Dropped UDP packet for"
+					" incorrect checksum calculation\n");
+				if (XmtCmd)
+					SXG_ABORT_CMD(XmtRingInfo);
+				spin_unlock_irqrestore(&adapter->XmtZeroLock,
+							 flags);
+				return STATUS_SUCCESS;
+			}
 		}
-	} else {
-		adapter->Stats.DumbXmtUcastPkts++;
-		adapter->Stats.DumbXmtUcastBytes += DataLength;
 	}
-#endif
+
 	/*
 	 * Fill in the command
 	 * Copy out the first SGE to the command and adjust for offset
@@ -2697,31 +2716,17 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 		(SXG_INVALID_SGL(phys_addr,skb->data_len)))
 	{
 		spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
+		if (XmtCmd)
+			SXG_ABORT_CMD(XmtRingInfo);
 		/* Silently drop this packet */
 		printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
 		return STATUS_SUCCESS;
 	}
-	memset(XmtCmd, '\0', sizeof(*XmtCmd));
 	XmtCmd->Buffer.FirstSgeAddress = phys_addr;
 	XmtCmd->Buffer.FirstSgeLength = DataLength;
 	XmtCmd->Buffer.SgeOffset = 0;
 	XmtCmd->Buffer.TotalLength = DataLength;
-	XmtCmd->SgEntries = 1;
-	XmtCmd->Flags = 0;
 
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		/*
-		 * We need to set the Checkum in IP  header to 0. This is
-		 * required by hardware.
-		 */
-		ip_hdr(skb)->check = 0x0;
-		XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
-		XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
-		/* Dont know if length will require a change in case of VLAN */
-		XmtCmd->CsumFlags.MacLen = ETH_HLEN;
-		XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
-							SXG_NW_HDR_LEN_SHIFT;
-	}
 	/*
 	 * Advance transmit cmd descripter by 1.
 	 * NOTE - See comments in SxgTcpOutput where we write
@@ -2733,6 +2738,24 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl,
 	ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
 	WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
 	adapter->Stats.XmtQLen++;	/* Stats within lock */
+	/* Update stats */
+	adapter->stats.tx_packets++;
+	adapter->stats.tx_bytes += DataLength;
+#if XXXTODO			/* Stats stuff */
+	if (SXG_MULTICAST_PACKET(EtherHdr)) {
+		if (SXG_BROADCAST_PACKET(EtherHdr)) {
+			adapter->Stats.DumbXmtBcastPkts++;
+			adapter->Stats.DumbXmtBcastBytes += DataLength;
+		} else {
+			adapter->Stats.DumbXmtMcastPkts++;
+			adapter->Stats.DumbXmtMcastBytes += DataLength;
+		}
+	} else {
+		adapter->Stats.DumbXmtUcastPkts++;
+		adapter->Stats.DumbXmtUcastBytes += DataLength;
+	}
+#endif
+
 	spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
 		  XmtCmd, pSgl, SxgSgl, 0);
-- 
GitLab


From 86a79d2e7094589413880eefa5c6111032382584 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 13 Apr 2009 13:16:54 -0700
Subject: [PATCH 0465/1421] Staging: go7007: fix build issues

Now that TUNER_SET_TYPE_ADDR is gone from the tree, the older code kicks
in and tries to use TUNER_SET_TYPE, which went away a long time ago.

This patch removes all of this logic, as it should not be needed anymore
now, and by doing so, fixes the build.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/go7007/go7007-driver.c  | 15 ---------------
 drivers/staging/go7007/wis-sony-tuner.c |  2 ++
 2 files changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index 58bfc8d81b3..f47c0ce2849 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -268,21 +268,6 @@ int go7007_register_encoder(struct go7007 *go)
 			init_i2c_module(&go->i2c_adapter,
 					go->board_info->i2c_devs[i].id,
 					go->board_info->i2c_devs[i].addr);
-#ifdef TUNER_SET_TYPE_ADDR
-		if (go->tuner_type >= 0) {
-			struct tuner_setup tun_setup = {
-				.mode_mask	= T_ANALOG_TV,
-				.addr		= ADDR_UNSET,
-				.type		= go->tuner_type
-			};
-			i2c_clients_command(&go->i2c_adapter,
-				TUNER_SET_TYPE_ADDR, &tun_setup);
-		}
-#else
-		if (go->tuner_type >= 0)
-			i2c_clients_command(&go->i2c_adapter,
-				TUNER_SET_TYPE, &go->tuner_type);
-#endif
 		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
 			i2c_clients_command(&go->i2c_adapter,
 				DECODER_SET_CHANNEL, &go->channel_number);
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index 58fddb12237..0a7eeef7c00 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -386,6 +386,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 	struct wis_sony_tuner *t = i2c_get_clientdata(client);
 
 	switch (cmd) {
+#if 0
 #ifdef TUNER_SET_TYPE_ADDR
 	case TUNER_SET_TYPE_ADDR:
 	{
@@ -463,6 +464,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 				t->type, sony_tuners[t->type - 200].name);
 		break;
 	}
+#endif
 	case VIDIOC_G_FREQUENCY:
 	{
 		struct v4l2_frequency *f = arg;
-- 
GitLab


From 5672487d29bd6a3cb0bff941d4f4535ccacc41ed Mon Sep 17 00:00:00 2001
From: Daniele Napolitano <dnax88@gmail.com>
Date: Tue, 14 Apr 2009 16:58:33 -0700
Subject: [PATCH 0466/1421] otus/zdusb.c: additional USB idnetifier

Provide support for WN111v2 USB 802.11n adapter.

Signed-off-by: Daniele Napolitano <dnax88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/otus/zdusb.c | 3 ++-
 drivers/staging/otus/zdusb.h | 4 ++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c
index 78f1d2224fa..2a6d937ba5e 100644
--- a/drivers/staging/otus/zdusb.c
+++ b/drivers/staging/otus/zdusb.c
@@ -48,7 +48,8 @@ static const char driver_name[] = "Otus";
 static struct usb_device_id zd1221_ids [] = {
 	{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
         { USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
-	{ USB_DEVICE(0x0846, 0x9010) },
+	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
+	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/staging/otus/zdusb.h b/drivers/staging/otus/zdusb.h
index 656dc212ade..9f8ab2e9616 100644
--- a/drivers/staging/otus/zdusb.h
+++ b/drivers/staging/otus/zdusb.h
@@ -40,4 +40,8 @@
 #define VENDOR_DLINK            0x07D1  //Dlink
 #define PRODUCT_DWA160A         0x3C10
 
+#define	VENDOR_NETGEAR		0x0846	/* NetGear */
+#define	PRODUCT_WNDA3100	0x9010
+#define	PRODUCT_WN111v2		0x9001
+
 #endif
-- 
GitLab


From 1a92e82a86556727da1626393f2a6becf7e62f39 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 15 Apr 2009 16:52:16 -0700
Subject: [PATCH 0467/1421] staging: slicoss: update README

I looked, I gagged, I left

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/slicoss/README | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README
index 2d5b1127ce5..70f49099c06 100644
--- a/drivers/staging/slicoss/README
+++ b/drivers/staging/slicoss/README
@@ -10,7 +10,36 @@ TODO:
 	- move firmware loading to request_firmware()
 	- remove direct memory access of structures
 	- any remaining sparse and checkpatch.pl warnings
-	- any netdev recommended changes
+
+	- use net_device_ops
+	- use dev->stats rather than adapter->stats
+	- don't cast netdev_priv it is already void
+	- use compare_ether_addr
+	- GET RID OF MACROS
+	- work on all architectures
+	   - without CONFIG_X86_64 confusion
+	   - do 64 bit correctly
+	   - don't depend on order of union
+	- get rid of ASSERT(), use BUG() instead but only where necessary
+	  looks like most aren't really useful
+	- no new SIOCDEVPRIVATE ioctl allowed
+	- don't use module_param for configuring interrupt mitigation
+	  use ethtool instead
+	- reorder code to elminate use of forward declarations
+	- don't keep private linked list of drivers.
+	- remove all the gratiutous debug infrastructure
+	- use PCI_DEVICE()
+	- do ethtool correctly using ethtool_ops
+	- NAPI?
+	- wasted overhead of extra stats
+	- state variables for things that are
+	  easily availble and shouldn't be kept in card structure, cardnum, ...
+	  slotnumber, events, ...
+	- get rid of slic_spinlock wrapper
+	- volatile == bad design => bad code
+	- locking too fine grained, not designed just throw more locks
+	  at problem
+
 
 Please send patches to:
         Greg Kroah-Hartman <gregkh@suse.de>
-- 
GitLab


From 07f4f8bf436e3f389a12cb792ad16275b9091b51 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Thu, 16 Apr 2009 13:46:12 -0700
Subject: [PATCH 0468/1421] drm/i915: Don't let an oops get triggered from
 irq_emit without dma init.

Userland is broken if it's trying this, but we also shouldn't allow oopses.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index ee7ce7b78cf..98bb4c878c4 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -406,7 +406,7 @@ int i915_irq_emit(struct drm_device *dev, void *data,
 	drm_i915_irq_emit_t *emit = data;
 	int result;
 
-	if (!dev_priv) {
+	if (!dev_priv || !dev_priv->ring.virtual_start) {
 		DRM_ERROR("called with no initialization\n");
 		return -EINVAL;
 	}
-- 
GitLab


From 5b0bdd6f7284ed39ee553f8a8c4f0d372c87133a Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 16 Apr 2009 15:17:39 -0700
Subject: [PATCH 0469/1421] drm/i915: fix transition to I915_TILING_NONE

Transitions to TILING_NONE skipped the call to unbind the object, which left
the fence register set and caused future CPU access through the GTT to
access the object in tiled mode.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem_tiling.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index f27e523c764..52a059354e8 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -283,7 +283,6 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 	mutex_lock(&dev->struct_mutex);
 
 	if (args->tiling_mode == I915_TILING_NONE) {
-		obj_priv->tiling_mode = I915_TILING_NONE;
 		args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
 	} else {
 		if (args->tiling_mode == I915_TILING_X)
-- 
GitLab


From d770e3cfe5a274a343d896b2cc1646af85646fbc Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed, 15 Apr 2009 21:46:36 +0100
Subject: [PATCH 0470/1421] drm/i915: Register ACPI video even when not
 modesetting

The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_opregion.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 69427722d20..8dc1fd3115c 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -370,11 +370,8 @@ int intel_opregion_init(struct drm_device *dev, int resume)
 	if (mboxes & MBOX_ACPI) {
 		DRM_DEBUG("Public ACPI methods supported\n");
 		opregion->acpi = base + OPREGION_ACPI_OFFSET;
-		if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
 			intel_didl_outputs(dev);
-			if (!resume)
-				acpi_video_register();
-		}
 	} else {
 		DRM_DEBUG("Public ACPI methods not supported\n");
 		err = -ENOTSUPP;
@@ -391,6 +388,10 @@ int intel_opregion_init(struct drm_device *dev, int resume)
 		opregion->asle = base + OPREGION_ASLE_OFFSET;
 	}
 
+	if (!resume)
+		acpi_video_register();
+
+
 	/* Notify BIOS we are ready to handle ACPI video ext notifs.
 	 * Right now, all the events are handled by the ACPI video module.
 	 * We don't actually need to do anything with them. */
-- 
GitLab


From 3b1c1c1118880921da1188b7245e0470742802f8 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed, 1 Apr 2009 19:52:29 +0100
Subject: [PATCH 0471/1421] drm/i915: Unregister ACPI video driver when exiting

The i915 DRM triggers registration of the ACPI video driver on load. It
should unregister it at unload in order to avoid generating backtraces on
being reloaded.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/acpi/video.c                 | 3 ++-
 drivers/gpu/drm/i915/i915_dma.c      | 2 +-
 drivers/gpu/drm/i915/i915_drv.c      | 2 +-
 drivers/gpu/drm/i915/i915_drv.h      | 4 ++--
 drivers/gpu/drm/i915/i915_opregion.c | 5 ++++-
 include/acpi/video.h                 | 2 ++
 6 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb7543a9..8961e613e09 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -2293,7 +2293,7 @@ static int __init acpi_video_init(void)
 	return acpi_video_register();
 }
 
-static void __exit acpi_video_exit(void)
+void __exit acpi_video_exit(void)
 {
 
 	acpi_bus_unregister_driver(&acpi_video_bus);
@@ -2302,6 +2302,7 @@ static void __exit acpi_video_exit(void)
 
 	return;
 }
+EXPORT_SYMBOL(acpi_video_exit);
 
 module_init(acpi_video_init);
 module_exit(acpi_video_exit);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index a000cf02882..272614389c0 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1232,7 +1232,7 @@ int i915_driver_unload(struct drm_device *dev)
 	if (dev_priv->regs != NULL)
 		iounmap(dev_priv->regs);
 
-	intel_opregion_free(dev);
+	intel_opregion_free(dev, 0);
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		intel_modeset_cleanup(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 6503e2210f6..98560e1e899 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -77,7 +77,7 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state)
 		drm_irq_uninstall(dev);
 	}
 
-	intel_opregion_free(dev);
+	intel_opregion_free(dev, 1);
 
 	if (state.event == PM_EVENT_SUSPEND) {
 		/* Shut down the device */
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 473a8f7fbdb..d7471fe1beb 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -674,12 +674,12 @@ extern int i915_restore_state(struct drm_device *dev);
 #ifdef CONFIG_ACPI
 /* i915_opregion.c */
 extern int intel_opregion_init(struct drm_device *dev, int resume);
-extern void intel_opregion_free(struct drm_device *dev);
+extern void intel_opregion_free(struct drm_device *dev, int suspend);
 extern void opregion_asle_intr(struct drm_device *dev);
 extern void opregion_enable_asle(struct drm_device *dev);
 #else
 static inline int intel_opregion_init(struct drm_device *dev, int resume) { return 0; }
-static inline void intel_opregion_free(struct drm_device *dev) { return; }
+static inline void intel_opregion_free(struct drm_device *dev, int suspend) { return; }
 static inline void opregion_asle_intr(struct drm_device *dev) { return; }
 static inline void opregion_enable_asle(struct drm_device *dev) { return; }
 #endif
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 8dc1fd3115c..3eceefe3475 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -409,7 +409,7 @@ err_out:
 	return err;
 }
 
-void intel_opregion_free(struct drm_device *dev)
+void intel_opregion_free(struct drm_device *dev, int suspend)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_opregion *opregion = &dev_priv->opregion;
@@ -417,6 +417,9 @@ void intel_opregion_free(struct drm_device *dev)
 	if (!opregion->enabled)
 		return;
 
+	if (!suspend)
+		acpi_video_exit();
+
 	opregion->acpi->drdy = 0;
 
 	system_opregion = NULL;
diff --git a/include/acpi/video.h b/include/acpi/video.h
index f0275bb79ce..af6fe95fd3d 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -3,8 +3,10 @@
 
 #if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
 extern int acpi_video_register(void);
+extern int acpi_video_exit(void);
 #else
 static inline int acpi_video_register(void) { return 0; }
+static inline void acpi_video_exit(void) { return; }
 #endif
 
 #endif
-- 
GitLab


From 44ab43155e8071fbf037513e57de9a79044edf56 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed, 1 Apr 2009 19:53:33 +0100
Subject: [PATCH 0472/1421] drm/i915: Enable ASLE if present

The changes to opregion initialisation order meant that the ASLE setup
code might not be run at the correct time. Ensure that the interrupts are
set up.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_opregion.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 3eceefe3475..dc425e74a26 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -386,6 +386,7 @@ int intel_opregion_init(struct drm_device *dev, int resume)
 	if (mboxes & MBOX_ASLE) {
 		DRM_DEBUG("ASLE supported\n");
 		opregion->asle = base + OPREGION_ASLE_OFFSET;
+		opregion_enable_asle(dev);
 	}
 
 	if (!resume)
-- 
GitLab


From dc098551918093901d8ac8936e9d1a1b891b56ed Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Fri, 17 Apr 2009 09:22:42 -0500
Subject: [PATCH 0473/1421] x86/uv: fix init of memory-less nodes

Add support for nodes that have cpus but no memory.
The current code was failing to add these nodes
to the nodes_present_map.

v2: Fixes case caught by David Rientjes - missed support
    for the x2apic SRAT table.

[ Impact: fix potential boot crash on memory-less UV nodes. ]

Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090417142242.GA23743@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_64.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index c7d272b8574..33c5fa57e43 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -28,6 +28,7 @@ int acpi_numa __initdata;
 static struct acpi_table_slit *acpi_slit;
 
 static nodemask_t nodes_parsed __initdata;
+static nodemask_t cpu_nodes_parsed __initdata;
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 static struct bootnode nodes_add[MAX_NUMNODES];
 static int found_add_area __initdata;
@@ -141,6 +142,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
 
 	apic_id = pa->apic_id;
 	apicid_to_node[apic_id] = node;
+	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
 	       pxm, apic_id, node);
@@ -174,6 +176,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	else
 		apic_id = pa->apic_id;
 	apicid_to_node[apic_id] = node;
+	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
 	       pxm, apic_id, node);
@@ -402,7 +405,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 	}
 
-	node_possible_map = nodes_parsed;
+	/* Account for nodes with cpus and no memory */
+	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 
 	/* Finally register nodes */
 	for_each_node_mask(i, node_possible_map)
-- 
GitLab


From 27229ca63269c1be0a710f074fa9de4024f283f1 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Fri, 17 Apr 2009 09:24:47 -0500
Subject: [PATCH 0474/1421] x86/uv: fix init of cpu-less nodes

Fix an endcase in the UV initialization code for the "UV large system mode"
of apicids.  If node zero contains no cpus, cpus on another node will be the
boot cpu.  The percpu data that contains the extra apicid bits was not
being initialized early enough.

[ Impact: fix potential boot crash on cpu-less UV nodes ]

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090417142447.GA23759@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1248318436e..49d2f5c739b 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -19,6 +19,7 @@
 #include <linux/timer.h>
 #include <linux/cpu.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
@@ -34,6 +35,17 @@ DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 static enum uv_system_type uv_system_type;
 
+static int early_get_nodeid(void)
+{
+	union uvh_node_id_u node_id;
+	unsigned long *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
+	node_id.v = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	return node_id.s.node_id;
+}
+
 static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
@@ -42,6 +54,8 @@ static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		else if (!strcmp(oem_table_id, "UVX"))
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
+			__get_cpu_var(x2apic_extra_bits) =
+				early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
 			return 1;
 		}
-- 
GitLab


From 1648e4f805063137b55b869666e936ffd4419cdf Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 17 Apr 2009 10:46:37 -0700
Subject: [PATCH 0475/1421] x86, kbuild: make "make install" not depend on
 vmlinux

It is common to use "make install" in restricted environments which
differ from the one which was actually used to build the kernel.  In
such environments it is highly undesirable to trigger a rebuild of any
part of the system.  Worse, the rebuild may be spurious, triggered by
differences in the environment.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org>
---
 arch/x86/Makefile | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f05d8c91d9e..8c86b72afdc 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -153,7 +153,7 @@ endif
 
 boot := arch/x86/boot
 
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
 
 PHONY += bzImage $(BOOT_TARGETS)
 
@@ -171,6 +171,10 @@ bzImage: vmlinux
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
+PHONY += install
+install:
+	$(Q)$(MAKE) $(build)=$(boot) $@
+
 PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
-- 
GitLab


From a81b6314e0aa480b8ac6dd02779d44cd0bee0a34 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Fri, 17 Apr 2009 23:31:20 +0530
Subject: [PATCH 0476/1421] x86: mm/numa_32.c calculate_numa_remap_pages should
 use __init

calculate_numa_remap_pages() is called only by __init initmem_init()
further calculate_numa_remap_pages is calling:
	__init find_e820_area() and __init reserve_early()

So calculate_numa_remap_pages() should be __init calculate_numa_remap_pages().

 WARNING: arch/x86/built-in.o(.text+0x82ea3): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:find_e820_area()
 The function calculate_numa_remap_pages() references
 the function __init find_e820_area().
 This is often because calculate_numa_remap_pages lacks a __init
 annotation or the annotation of find_e820_area is wrong.

 WARNING: arch/x86/built-in.o(.text+0x82f5f): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:reserve_early()
 The function calculate_numa_remap_pages() references
 the function __init reserve_early().
 This is often because calculate_numa_remap_pages lacks a __init
 annotation or the annotation of reserve_early is wrong.

[ Impact: save memory, address Section mismatch warning ]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1239991281.3153.4.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/numa_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 3daefa04ace..d2530062fe0 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -257,7 +257,7 @@ void resume_map_numa_kva(pgd_t *pgd_base)
 }
 #endif
 
-static unsigned long calculate_numa_remap_pages(void)
+static __init unsigned long calculate_numa_remap_pages(void)
 {
 	int nid;
 	unsigned long size, reserve_pages = 0;
-- 
GitLab


From fc6f394332ef1bf6ff5fbeaba0f2cd7a3c7971b6 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 17 Apr 2009 11:45:30 -0400
Subject: [PATCH 0477/1421] cifs: when renaming don't try to unlink negative
 dentry

When attempting to rename a file on a read-only share, the kernel can
call cifs_unlink on a negative dentry, which causes an oops. Only try
to unlink the file if it's a positive dentry.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Shirish Pargaonkar <shirishp@us.ibm.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 09082ac8518..f36b4e40e44 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1453,7 +1453,8 @@ int cifs_rename(struct inode *source_dir, struct dentry *source_dentry,
 		     checking the UniqueId via FILE_INTERNAL_INFO */
 
 unlink_target:
-	if ((rc == -EACCES) || (rc == -EEXIST)) {
+	/* Try unlinking the target dentry if it's not negative */
+	if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) {
 		tmprc = cifs_unlink(target_dir, target_dentry);
 		if (tmprc)
 			goto cifs_rename_exit;
-- 
GitLab


From 8d2b450d0f9233f221d545f26720eebbc468e857 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Mon, 13 Apr 2009 11:27:18 -0400
Subject: [PATCH 0478/1421] sata_mv: tidy up qc->tf usage in qc_prep()
 functions

Tidy up qc->tf accesses in the mv_qc_prep() functions.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 37ae5dc1070..c7da6022c6b 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1898,17 +1898,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 	struct mv_port_priv *pp = ap->private_data;
 	__le16 *cw;
-	struct ata_taskfile *tf;
+	struct ata_taskfile *tf = &qc->tf;
 	u16 flags = 0;
 	unsigned in_index;
 
-	if ((qc->tf.protocol != ATA_PROT_DMA) &&
-	    (qc->tf.protocol != ATA_PROT_NCQ))
+	if ((tf->protocol != ATA_PROT_DMA) &&
+	    (tf->protocol != ATA_PROT_NCQ))
 		return;
 
 	/* Fill in command request block
 	 */
-	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+	if (!(tf->flags & ATA_TFLAG_WRITE))
 		flags |= CRQB_FLAG_READ;
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
@@ -1924,7 +1924,6 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
 
 	cw = &pp->crqb[in_index].ata_cmd[0];
-	tf = &qc->tf;
 
 	/* Sadly, the CRQB cannot accomodate all registers--there are
 	 * only 11 bytes...so we must pick and choose required
@@ -1990,16 +1989,16 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 	struct mv_port_priv *pp = ap->private_data;
 	struct mv_crqb_iie *crqb;
-	struct ata_taskfile *tf;
+	struct ata_taskfile *tf = &qc->tf;
 	unsigned in_index;
 	u32 flags = 0;
 
-	if ((qc->tf.protocol != ATA_PROT_DMA) &&
-	    (qc->tf.protocol != ATA_PROT_NCQ))
+	if ((tf->protocol != ATA_PROT_DMA) &&
+	    (tf->protocol != ATA_PROT_NCQ))
 		return;
 
 	/* Fill in Gen IIE command request block */
-	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+	if (!(tf->flags & ATA_TFLAG_WRITE))
 		flags |= CRQB_FLAG_READ;
 
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
@@ -2015,7 +2014,6 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
 	crqb->flags = cpu_to_le32(flags);
 
-	tf = &qc->tf;
 	crqb->ata_cmd[0] = cpu_to_le32(
 			(tf->command << 16) |
 			(tf->feature << 24)
-- 
GitLab


From 299b3f8df90a3f7416d8df121d8a42b1a2aeced4 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Mon, 13 Apr 2009 11:29:34 -0400
Subject: [PATCH 0479/1421] sata_mv: workaround for multi_count errata sata24

Workaround for errata SATA#24 in sata_mv.
This errata affects WRITE_MULTI* commands when
the device multi_count produces a DRQ block size >= 4Kbytes.

We work around it here by converting such operations
into ordinary PIO_WRITEs instead.

Note that this might result in a PIO FUA write unavoidably being converted
into a non-FUA write.  In practice, any system using FUA is also going to be
using DMA rather than PIO, so this shouldn't affect anyone in the real world.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 44 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 42 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index c7da6022c6b..870dcfd8235 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1881,6 +1881,39 @@ static u8 mv_bmdma_status(struct ata_port *ap)
 	return status;
 }
 
+static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc)
+{
+	struct ata_taskfile *tf = &qc->tf;
+	/*
+	 * Workaround for 88SX60x1 FEr SATA#24.
+	 *
+	 * Chip may corrupt WRITEs if multi_count >= 4kB.
+	 * Note that READs are unaffected.
+	 *
+	 * It's not clear if this errata really means "4K bytes",
+	 * or if it always happens for multi_count > 7
+	 * regardless of device sector_size.
+	 *
+	 * So, for safety, any write with multi_count > 7
+	 * gets converted here into a regular PIO write instead:
+	 */
+	if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) {
+		if (qc->dev->multi_count > 7) {
+			switch (tf->command) {
+			case ATA_CMD_WRITE_MULTI:
+				tf->command = ATA_CMD_PIO_WRITE;
+				break;
+			case ATA_CMD_WRITE_MULTI_FUA_EXT:
+				tf->flags &= ~ATA_TFLAG_FUA; /* ugh */
+				/* fall through */
+			case ATA_CMD_WRITE_MULTI_EXT:
+				tf->command = ATA_CMD_PIO_WRITE_EXT;
+				break;
+			}
+		}
+	}
+}
+
 /**
  *      mv_qc_prep - Host specific command preparation.
  *      @qc: queued command to prepare
@@ -1902,9 +1935,16 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	u16 flags = 0;
 	unsigned in_index;
 
-	if ((tf->protocol != ATA_PROT_DMA) &&
-	    (tf->protocol != ATA_PROT_NCQ))
+	switch (tf->protocol) {
+	case ATA_PROT_DMA:
+	case ATA_PROT_NCQ:
+		break;	/* continue below */
+	case ATA_PROT_PIO:
+		mv_rw_multi_errata_sata24(qc);
 		return;
+	default:
+		return;
+	}
 
 	/* Fill in command request block
 	 */
-- 
GitLab


From b4746ed785d776b1be647458bc911cc607c6ef1c Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 17 Apr 2009 12:21:21 +0100
Subject: [PATCH 0480/1421] pata_via: Cache and rewrite the device bit

Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our
optimised write path avoids doing this but we need to remove the
optimisation on these devices.

[Identified and some original patches proposed by Josehn Chan @ VIA but
discussion then all ground to a halt so given a test case I dug it back out]

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk
Tested-by: Christoph Bisping (bug #13086)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_via.c | 74 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 67 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index b08e6e0f82b..45657cacec4 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -62,7 +62,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
 
 /*
  *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -136,6 +136,9 @@ static const struct via_isa_bridge {
 	{ NULL }
 };
 
+struct via_port {
+	u8 cached_device;
+};
 
 /*
  *	Cable special cases
@@ -346,14 +349,70 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  */
 static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
-	struct ata_taskfile tmp_tf;
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct via_port *vp = ap->private_data;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+	int newctl = 0;
+
+	if (tf->ctl != ap->last_ctl) {
+		iowrite8(tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+		newctl = 1;
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		iowrite8(tf->device, ioaddr->device_addr);
+		vp->cached_device = tf->device;
+	} else if (newctl)
+		iowrite8(vp->cached_device, ioaddr->device_addr);
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		WARN_ON_ONCE(!ioaddr->ctl_addr);
+		iowrite8(tf->hob_feature, ioaddr->feature_addr);
+		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
 
-	if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
-		tmp_tf = *tf;
-		tmp_tf.flags |= ATA_TFLAG_DEVICE;
-		tf = &tmp_tf;
+	if (is_addr) {
+		iowrite8(tf->feature, ioaddr->feature_addr);
+		iowrite8(tf->nsect, ioaddr->nsect_addr);
+		iowrite8(tf->lbal, ioaddr->lbal_addr);
+		iowrite8(tf->lbam, ioaddr->lbam_addr);
+		iowrite8(tf->lbah, ioaddr->lbah_addr);
+		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
 	}
-	ata_sff_tf_load(ap, tf);
+
+	ata_wait_idle(ap);
+}
+
+static int via_port_start(struct ata_port *ap)
+{
+	struct via_port *vp;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	int ret = ata_sff_port_start(ap);
+	if (ret < 0)
+		return ret;
+
+	vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
+	if (vp == NULL)
+		return -ENOMEM;
+	ap->private_data = vp;
+	return 0;
 }
 
 static struct scsi_host_template via_sht = {
@@ -367,6 +426,7 @@ static struct ata_port_operations via_port_ops = {
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
 	.sff_tf_load	= via_tf_load,
+	.port_start	= via_port_start,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
-- 
GitLab


From 16e6aeca9e86fb0effb847c1687c9b2cc8e3fb4c Mon Sep 17 00:00:00 2001
From: Zhenwen Xu <helight.xu@gmail.com>
Date: Fri, 17 Apr 2009 15:32:59 +0800
Subject: [PATCH 0481/1421] [libata] fix build error on
 drivers/ata/pata_legacy.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

fix those errors:

drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’:
drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function)
drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once
drivers/ata/pata_legacy.c:289: error: for each function it appears in.)
drivers/ata/pata_legacy.c: At top level:
drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a
+function)
make[2]: *** [drivers/ata/pata_legacy.o] Error 1
make[1]: *** [drivers/ata] Error 2

Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_legacy.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 6f985bed8cb..f72c6c5b820 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -285,10 +285,11 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 			unsigned char *buf, unsigned int buflen, int rw)
 {
 	int slop = buflen & 3;
+	struct ata_port *ap = dev->link->ap;
+
 	/* 32bit I/O capable *and* we need to write a whole number of dwords */
 	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
 					&& (ap->pflags & ATA_PFLAG_PIO32)) {
-		struct ata_port *ap = dev->link->ap;
 		unsigned long flags;
 
 		local_irq_save(flags);
@@ -866,7 +867,7 @@ static struct legacy_controller controllers[] = {
 			0,			0,			NULL },
 	{"PDC20230",	&pdc20230_port_ops,	0x7,
 			ATA_FLAG_NO_IORDY,
-			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE,	NULL },
+			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,	NULL },
 	{"HT6560A",	&ht6560a_port_ops,	0x07,
 			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"HT6560B",	&ht6560b_port_ops,	0x1F,
@@ -877,13 +878,13 @@ static struct legacy_controller controllers[] = {
 			0,			0,			NULL },
 	{"QDI6500",	&qdi6500_port_ops,	0x07,
 			ATA_FLAG_NO_IORDY,
-			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE,    qdi_port },
+			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,    qdi_port },
 	{"QDI6580",	&qdi6580_port_ops,	0x1F,
-			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port },
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
 	{"QDI6580DP",	&qdi6580dp_port_ops,	0x1F,
-			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE, qdi_port },
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
 	{"W83759A",	&winbond_port_ops,	0x1F,
-			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32_CHANGE,
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
 								winbond_port }
 };
 
-- 
GitLab


From defc433ba3bc587826bb467ce0e63452deafa65d Mon Sep 17 00:00:00 2001
From: Etienne Basset <etienne.basset@numericable.fr>
Date: Thu, 16 Apr 2009 23:58:42 +0200
Subject: [PATCH 0482/1421] Smack: check for SMACK xattr validity in
 smack_inode_setxattr

the following patch moves checks for SMACK xattr validity
from smack_inode_post_setxattr (which cannot return an error to the user)
to smack_inode_setxattr (which can return an error).

Signed-off-by: Etienne Basset <etienne.basset@numericable.fr>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/smack/smack_lsm.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 921514902ec..98b3195347a 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -609,8 +609,12 @@ static int smack_inode_setxattr(struct dentry *dentry, const char *name,
 	    strcmp(name, XATTR_NAME_SMACKIPOUT) == 0) {
 		if (!capable(CAP_MAC_ADMIN))
 			rc = -EPERM;
-		/* a label cannot be void and cannot begin with '-' */
-		if (size == 0 || (size > 0 && ((char *)value)[0] == '-'))
+		/*
+		 * check label validity here so import wont fail on
+		 * post_setxattr
+		 */
+		if (size == 0 || size >= SMK_LABELLEN ||
+		    smk_import(value, size) == NULL)
 			rc = -EINVAL;
 	} else
 		rc = cap_inode_setxattr(dentry, name, value, size, flags);
@@ -644,9 +648,6 @@ static void smack_inode_post_setxattr(struct dentry *dentry, const char *name,
 	if (strcmp(name, XATTR_NAME_SMACK))
 		return;
 
-	if (size >= SMK_LABELLEN)
-		return;
-
 	isp = dentry->d_inode->i_security;
 
 	/*
-- 
GitLab


From 96f15efcea94545987715f453a8c2b8ea592d000 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 17 Apr 2009 23:32:20 -0400
Subject: [PATCH 0483/1421] ACPI: Disable _GTS and _BFS support by default

Executing BIOS code paths not exercised by Windows
tends to get Linux into trouble.

However, if a system does benefit from _GTS or _BFS,
acpi.gts=1 an acpi.bfs=1 are now available to enable them.

http://bugzilla.kernel.org/show_bug.cgi?id=13041

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/hwsleep.c | 43 +++++++++++++++++++++--------------
 drivers/acpi/sleep.c          | 27 ++++++++++++++++++++++
 2 files changed, 53 insertions(+), 17 deletions(-)

diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index baa5fc05e12..db307a356f0 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -211,6 +211,12 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
 
 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
 
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_enter_sleep_state
@@ -278,16 +284,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 		return_ACPI_STATUS(status);
 	}
 
-	/* Execute the _GTS method */
+	if (gts) {
+		/* Execute the _GTS method */
 
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
+		arg_list.count = 1;
+		arg_list.pointer = &arg;
+		arg.type = ACPI_TYPE_INTEGER;
+		arg.integer.value = sleep_state;
 
-	status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		return_ACPI_STATUS(status);
+		status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+		if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+			return_ACPI_STATUS(status);
+		}
 	}
 
 	/* Get current value of PM1A control */
@@ -513,18 +521,19 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
 		}
 	}
 
-	/* Execute the _BFS method */
+	if (bfs) {
+		/* Execute the _BFS method */
 
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
+		arg_list.count = 1;
+		arg_list.pointer = &arg;
+		arg.type = ACPI_TYPE_INTEGER;
+		arg.integer.value = sleep_state;
 
-	status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+		status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+		if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+			ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+		}
 	}
-
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 779e4e500df..9042875ac94 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -713,6 +713,32 @@ static void acpi_power_off(void)
 	acpi_enter_sleep_state(ACPI_STATE_S5);
 }
 
+/*
+ * ACPI 2.0 created the optional _GTS and _BFS,
+ * but industry adoption has been neither rapid nor broad.
+ *
+ * Linux gets into trouble when it executes poorly validated
+ * paths through the BIOS, so disable _GTS and _BFS by default,
+ * but do speak up and offer the option to enable them.
+ */
+void __init acpi_gts_bfs_check(void)
+{
+	acpi_handle dummy;
+
+	if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+	{
+		printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
+		printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
+			"please notify linux-acpi@vger.kernel.org\n");
+	}
+	if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+	{
+		printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
+		printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
+			"please notify linux-acpi@vger.kernel.org\n");
+	}
+}
+
 int __init acpi_sleep_init(void)
 {
 	acpi_status status;
@@ -771,5 +797,6 @@ int __init acpi_sleep_init(void)
 	 * object can also be evaluated when the system enters S5.
 	 */
 	register_reboot_notifier(&tts_notifier);
+	acpi_gts_bfs_check();
 	return 0;
 }
-- 
GitLab


From 0f751719e4e689efbe537233552e5f0529ecb8ce Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Fri, 17 Apr 2009 20:35:57 -0700
Subject: [PATCH 0484/1421] Input: omap-keypad - use disable_irq_nosync() in
 irq handler

disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/omap-keypad.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 058fa8b02c2..87ec7b18ac6 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 	/* disable keyboard interrupt and schedule for handling */
 	if (cpu_is_omap24xx()) {
 		int i;
-		for (i = 0; i < omap_kp->rows; i++)
-			disable_irq(gpio_to_irq(row_gpios[i]));
+
+		for (i = 0; i < omap_kp->rows; i++) {
+			int gpio_irq = gpio_to_irq(row_gpios[i]);
+			/*
+			 * The interrupt which we're currently handling should
+			 * be disabled _nosync() to avoid deadlocks waiting
+			 * for this handler to complete.  All others should
+			 * be disabled the regular way for SMP safety.
+			 */
+			if (gpio_irq == irq)
+				disable_irq_nosync(gpio_irq);
+			else
+				disable_irq(gpio_irq);
+		}
 	} else
 		/* disable keyboard interrupt and schedule for handling */
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
-- 
GitLab


From e4bd3e591c8cc52ccf7a0b27f33aa7a5a19058d7 Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Fri, 17 Apr 2009 20:35:57 -0700
Subject: [PATCH 0485/1421] Input: sa1111ps2 - use disable_irq_nosync() in irq
 handlers

disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/sa1111ps2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 57953c0eb82..f412c69478a 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
 	spin_lock(&ps2if->lock);
 	status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
 	if (ps2if->head == ps2if->tail) {
-		disable_irq(irq);
+		disable_irq_nosync(irq);
 		/* done */
 	} else if (status & PS2STAT_TXE) {
 		sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
-- 
GitLab


From 29fa98bd9b50b5e9c17d99e961640ffafb765d71 Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Fri, 17 Apr 2009 20:35:57 -0700
Subject: [PATCH 0486/1421] Input: tsc2007 - use disable_irq_nosync() in irq
 handler

disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/tsc2007.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 4ab07024689..536668fbda2 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -235,7 +235,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
 	spin_lock_irqsave(&ts->lock, flags);
 
 	if (likely(ts->get_pendown_state())) {
-		disable_irq(ts->irq);
+		disable_irq_nosync(ts->irq);
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
 					HRTIMER_MODE_REL);
 	}
-- 
GitLab


From 3deb649e654ff87b87de9e415ac43ca8afbdff07 Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Fri, 17 Apr 2009 20:35:58 -0700
Subject: [PATCH 0487/1421] Input: ucb1400 - use disable_irq_nosync() in irq
 handler

disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/ucb1400_ts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index e868264fe79..f100c7f4c1d 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
 	struct ucb1400_ts *ucb = devid;
 
 	if (irqnr == ucb->irq) {
-		disable_irq(ucb->irq);
+		disable_irq_nosync(ucb->irq);
 		ucb->irq_pending = 1;
 		wake_up(&ucb->ts_wait);
 		return IRQ_HANDLED;
-- 
GitLab


From 67405439bca28c4dbecd3fefd97fbdb282a302d9 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Tue, 14 Apr 2009 20:16:45 +0100
Subject: [PATCH 0488/1421] thermal: Fix polling frequency for systems without
 passive cooling

The polling interval (in deciseconds) was accidently interpreted as
being in milliseconds in one codepath, resulting in excessively frequent
polling. Ensure that the conversion is performed.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9cd15e8c893..564ea142428 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -909,7 +909,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 			thermal_zone_device_register("acpitz", trips, tz,
 						     &acpi_thermal_zone_ops,
 						     0, 0, 0,
-						     tz->polling_frequency);
+						     tz->polling_frequency*100);
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 
-- 
GitLab


From 406e988bef742aa74cdc1f5fafc812ecebf7c02b Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue, 14 Apr 2009 02:44:10 +0000
Subject: [PATCH 0489/1421] thinkpad-acpi: silence hotkey enable warning for
 module parameter

Avoid the WARN() when the procfs handler for hotkey enable is used by
a module parameter.  Instead, urge the user to stop doing that.

Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a40b075743d..a186c5bbdcd 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2946,12 +2946,18 @@ static int hotkey_read(char *p)
 	return len;
 }
 
-static void hotkey_enabledisable_warn(void)
+static void hotkey_enabledisable_warn(bool enable)
 {
 	tpacpi_log_usertask("procfs hotkey enable/disable");
-	WARN(1, TPACPI_WARN
-	     "hotkey enable/disable functionality has been "
-	     "removed from the driver. Hotkeys are always enabled.\n");
+	if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
+			TPACPI_WARN
+			"hotkey enable/disable functionality has been "
+			"removed from the driver.  Hotkeys are always "
+			"enabled\n"))
+		printk(TPACPI_ERR
+			"Please remove the hotkey=enable module "
+			"parameter, it is deprecated.  Hotkeys are always "
+			"enabled\n");
 }
 
 static int hotkey_write(char *buf)
@@ -2971,9 +2977,9 @@ static int hotkey_write(char *buf)
 	res = 0;
 	while ((cmd = next_cmd(&buf))) {
 		if (strlencmp(cmd, "enable") == 0) {
-			hotkey_enabledisable_warn();
+			hotkey_enabledisable_warn(1);
 		} else if (strlencmp(cmd, "disable") == 0) {
-			hotkey_enabledisable_warn();
+			hotkey_enabledisable_warn(0);
 			res = -EPERM;
 		} else if (strlencmp(cmd, "reset") == 0) {
 			mask = hotkey_orig_mask;
-- 
GitLab


From 75bd3bf2ade9d548be0d2bde60b5ee0fdce0b127 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue, 14 Apr 2009 02:44:11 +0000
Subject: [PATCH 0490/1421] thinkpad-acpi: fix LED blinking through timer
 trigger

The set_blink hook code in the LED subdriver would never manage to get
a LED to blink, and instead it would just turn it on.  The consequence
of this is that the "timer" trigger would not cause the LED to blink
if given default parameters.

This problem exists since 2.6.26-rc1.

To fix it, switch the deferred LED work handling to use the
thinkpad-acpi-specific LED status (off/on/blink) directly.

This also makes the code easier to read, and to extend later.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 41 +++++++++++++---------------
 1 file changed, 19 insertions(+), 22 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a186c5bbdcd..a1d2abce309 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -303,11 +303,17 @@ static u32 dbg_level;
 
 static struct workqueue_struct *tpacpi_wq;
 
+enum led_status_t {
+	TPACPI_LED_OFF = 0,
+	TPACPI_LED_ON,
+	TPACPI_LED_BLINK,
+};
+
 /* Special LED class that can defer work */
 struct tpacpi_led_classdev {
 	struct led_classdev led_classdev;
 	struct work_struct work;
-	enum led_brightness new_brightness;
+	enum led_status_t new_state;
 	unsigned int led;
 };
 
@@ -4213,7 +4219,7 @@ static void light_set_status_worker(struct work_struct *work)
 			container_of(work, struct tpacpi_led_classdev, work);
 
 	if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
-		light_set_status((data->new_brightness != LED_OFF));
+		light_set_status((data->new_state != TPACPI_LED_OFF));
 }
 
 static void light_sysfs_set(struct led_classdev *led_cdev,
@@ -4223,7 +4229,8 @@ static void light_sysfs_set(struct led_classdev *led_cdev,
 		container_of(led_cdev,
 			     struct tpacpi_led_classdev,
 			     led_classdev);
-	data->new_brightness = brightness;
+	data->new_state = (brightness != LED_OFF) ?
+				TPACPI_LED_ON : TPACPI_LED_OFF;
 	queue_work(tpacpi_wq, &data->work);
 }
 
@@ -4730,12 +4737,6 @@ enum {	/* For TPACPI_LED_OLD */
 	TPACPI_LED_EC_HLMS = 0x0e,	/* EC reg to select led to command */
 };
 
-enum led_status_t {
-	TPACPI_LED_OFF = 0,
-	TPACPI_LED_ON,
-	TPACPI_LED_BLINK,
-};
-
 static enum led_access_mode led_supported;
 
 TPACPI_HANDLE(led, ec, "SLED",	/* 570 */
@@ -4847,23 +4848,13 @@ static int led_set_status(const unsigned int led,
 	return rc;
 }
 
-static void led_sysfs_set_status(unsigned int led,
-				 enum led_brightness brightness)
-{
-	led_set_status(led,
-			(brightness == LED_OFF) ?
-			TPACPI_LED_OFF :
-			(tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
-				TPACPI_LED_BLINK : TPACPI_LED_ON);
-}
-
 static void led_set_status_worker(struct work_struct *work)
 {
 	struct tpacpi_led_classdev *data =
 		container_of(work, struct tpacpi_led_classdev, work);
 
 	if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
-		led_sysfs_set_status(data->led, data->new_brightness);
+		led_set_status(data->led, data->new_state);
 }
 
 static void led_sysfs_set(struct led_classdev *led_cdev,
@@ -4872,7 +4863,13 @@ static void led_sysfs_set(struct led_classdev *led_cdev,
 	struct tpacpi_led_classdev *data = container_of(led_cdev,
 			     struct tpacpi_led_classdev, led_classdev);
 
-	data->new_brightness = brightness;
+	if (brightness == LED_OFF)
+		data->new_state = TPACPI_LED_OFF;
+	else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK)
+		data->new_state = TPACPI_LED_ON;
+	else
+		data->new_state = TPACPI_LED_BLINK;
+
 	queue_work(tpacpi_wq, &data->work);
 }
 
@@ -4890,7 +4887,7 @@ static int led_sysfs_blink_set(struct led_classdev *led_cdev,
 	} else if ((*delay_on != 500) || (*delay_off != 500))
 		return -EINVAL;
 
-	data->new_brightness = TPACPI_LED_BLINK;
+	data->new_state = TPACPI_LED_BLINK;
 	queue_work(tpacpi_wq, &data->work);
 
 	return 0;
-- 
GitLab


From f68f53a217b827580647d23fdc34eecdcb3739c6 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue, 14 Apr 2009 02:44:12 +0000
Subject: [PATCH 0491/1421] thinkpad-acpi: fix use of MODULE_AUTHOR

Fix the module to use one instance of MODULE_AUTHOR per author.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a1d2abce309..7a7cac264b8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7883,7 +7883,8 @@ IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
 IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
 IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
 
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_AUTHOR("Borislav Deianov <borislav@users.sf.net>");
+MODULE_AUTHOR("Henrique de Moraes Holschuh <hmh@hmh.eng.br>");
 MODULE_DESCRIPTION(TPACPI_DESC);
 MODULE_VERSION(TPACPI_VERSION);
 MODULE_LICENSE("GPL");
-- 
GitLab


From 922fe097b1e8f2f2f23dbed61cfe6e0316fecff1 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue, 14 Apr 2009 02:44:13 +0000
Subject: [PATCH 0492/1421] thinkpad-acpi: simplify module autoloading

Simplify the module autoloading a great deal, by keying to the HID for
the HKEY interface.

Only _really_ ancient IBM ThinkPad models like the 240, 240x and 570
lack the HKEY interface, and they're getting their own trimmed-down
driver one of these days.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 7a7cac264b8..caa774ae239 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7860,6 +7860,15 @@ static int __init thinkpad_acpi_module_init(void)
 
 MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
 
+/*
+ * This will autoload the driver in almost every ThinkPad
+ * in widespread use.
+ *
+ * Only _VERY_ old models, like the 240, 240x and 570 lack
+ * the HKEY event interface.
+ */
+MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids);
+
 /*
  * DMI matching for module autoloading
  *
@@ -7872,16 +7881,10 @@ MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
 #define IBM_BIOS_MODULE_ALIAS(__type) \
 	MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
 
-/* Non-ancient thinkpads */
-MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
-MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
-
 /* Ancient thinkpad BIOSes have to be identified by
  * BIOS type or model number, and there are far less
  * BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
-IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
-IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
+IBM_BIOS_MODULE_ALIAS("I[MU]");		/* 570, 570e */
 
 MODULE_AUTHOR("Borislav Deianov <borislav@users.sf.net>");
 MODULE_AUTHOR("Henrique de Moraes Holschuh <hmh@hmh.eng.br>");
-- 
GitLab


From b57f7e7b836d271902b8b7b1ec8cf9312dc5d228 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Tue, 14 Apr 2009 02:44:14 +0000
Subject: [PATCH 0493/1421] thinkpad-acpi: bump up version to 0.23

Plenty of high-profile changes, so it deserves a new version number.

Features added since 0.22:
 *  Restrict unsafe LEDs
 *  New race-less brightness control strategy for IBM ThinkPads
 *  Disclose TGID of driver access from userspace (debug)
 *  Warn when deprecated functions are used

Other changes:
 *  Better debug messages in some subdrivers
 *  Removed "hotkey disable" support, since it breaks the driver
 *  Dropped "ibm-acpi" alias

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 Documentation/laptops/thinkpad-acpi.txt | 4 ++--
 drivers/platform/x86/thinkpad_acpi.c    | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3d7650768bb..e7e9a69069e 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.22
-                        November 23rd,  2008
+                            Version 0.23
+                          April 10th, 2009
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index caa774ae239..912be65b626 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define TPACPI_VERSION "0.22"
+#define TPACPI_VERSION "0.23"
 #define TPACPI_SYSFS_VERSION 0x020300
 
 /*
-- 
GitLab


From 0300e7f1a525ae4e4ac05344624adf0e5f13ea52 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Fri, 17 Apr 2009 08:33:52 -0400
Subject: [PATCH 0494/1421] lockdep, x86: account for irqs enabled in
 paranoid_exit

I hit the check_flags error of lockdep:

 WARNING: at kernel/lockdep.c:2893 check_flags+0x1a7/0x1d0()
 [...]
 hardirqs last  enabled at (12567): [<ffffffff8026206a>] local_bh_enable+0xaa/0x110
 hardirqs last disabled at (12569): [<ffffffff80610c76>] int3+0x16/0x40
 softirqs last  enabled at (12566): [<ffffffff80514d2b>] lock_sock_nested+0xfb/0x110
 softirqs last disabled at (12568): [<ffffffff8058454e>] tcp_prequeue_process+0x2e/0xa0

The check_flags warning of lockdep tells me that lockdep thought interrupts
were disabled, but they were really enabled.

The numbers in the above parenthesis show the order of events:

 12566: softirqs last enabled:  lock_sock_nested
 12567: hardirqs last enabled:  local_bh_enable
 12568: softirqs last disabled: tcp_prequeue_process
 12566: hardirqs last disabled: int3

int3 is a breakpoint!

Examining this further, I have CONFIG_NET_TCPPROBE enabled which adds
break points into the kernel.

The paranoid_exit of the return of int3 does not account for enabling
interrupts on return to kernel. This code is a bit tricky since it
is also used by the nmi handler (when lockdep is off), and we must be
careful about the swapgs. We can not call kernel code after the swapgs
has been performed.

[ Impact: fix lockdep check_flags warning + self-turn-off ]

Acked-by: Peter Zijlsta <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_64.S | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index a331ec38af9..38946c6e843 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1410,7 +1410,10 @@ ENTRY(paranoid_exit)
 paranoid_swapgs:
 	TRACE_IRQS_IRETQ 0
 	SWAPGS_UNSAFE_STACK
+	RESTORE_ALL 8
+	jmp irq_return
 paranoid_restore:
+	TRACE_IRQS_IRETQ 0
 	RESTORE_ALL 8
 	jmp irq_return
 paranoid_userspace:
-- 
GitLab


From 8b5b94e4e9813cdd77103827f48d58c806ab45c6 Mon Sep 17 00:00:00 2001
From: Weidong Han <weidong.han@intel.com>
Date: Fri, 17 Apr 2009 16:42:12 +0800
Subject: [PATCH 0495/1421] docs, x86: add nox2apic back to
 kernel-parameters.txt

"nox2apic" was removed from kernel-parameters.txt by mistake, when
entries were sorted in alpha order (commit 0cb55ad2). But this early
parameter is still there, add it back to kernel-parameters.txt.

[ Impact: add boot parameter description ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: iommu@lists.linux-foundation.org
Cc: dwmw2@infradead.org
Cc: allen.m.kay@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1239957736-6161-2-git-send-email-weidong.han@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 Documentation/kernel-parameters.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a19f021f081..9e4fe724c87 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1588,6 +1588,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nowb		[ARM]
 
+	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+
 	nptcg=		[IA64] Override max number of concurrent global TLB
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.
-- 
GitLab


From 516ef69f160fb2f092d71f2cb635a9394ff8a71a Mon Sep 17 00:00:00 2001
From: Russell King - ARM Linux <linux@arm.linux.org.uk>
Date: Sat, 18 Apr 2009 10:11:53 +0100
Subject: [PATCH 0496/1421] ASoC: Fix warning in wm9705

I notice that the fixes were merged, minus one:

sound/soc/codecs/wm9705.c: At top level:
sound/soc/codecs/wm9705.c:445: warning: initialization from incompatible pointer type

so you might find this trivial patch useful.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm9705.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index 6e23a81dba7..c2d1a7a18fa 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -318,7 +318,7 @@ static int wm9705_reset(struct snd_soc_codec *codec)
 }
 
 #ifdef CONFIG_PM
-static int wm9705_soc_suspend(struct platform_device *pdev)
+static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
-- 
GitLab


From c018f1ee5cf81e58b93d9e93a2ee39cad13dc1ac Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 18 Apr 2009 17:42:19 +0200
Subject: [PATCH 0497/1421] hpt366: fix HPT370 DMA timeouts

The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A]
chips -- DMA stopped to work completely, only causing endless timeouts...

The culprit has been identified (at last!): it turned to be the code resetting
the DMA state machine before each transfer. Stop doing it now as this counter-
measure has clearly caused more harm than good.

This should fix the kernel.org bug #7703.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/hpt366.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index a0eb87f5913..cea1ac222a9 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -114,6 +114,8 @@
  *   the register setting lists into the table indexed by the clock selected
  * - set the correct hwif->ultra_mask for each individual chip
  * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
+ * - stop resetting HPT370's state machine before each DMA transfer as that has
+ *   caused more harm than good
  *	Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
  */
 
@@ -133,7 +135,7 @@
 #define DRV_NAME "hpt366"
 
 /* various tuning parameters */
-#define HPT_RESET_STATE_ENGINE
+#undef	HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
 
 static const char *quirk_drives[] = {
-- 
GitLab


From 59c8d04f5ee97ea46da854e9adbbaa45d988c39d Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 18 Apr 2009 17:42:19 +0200
Subject: [PATCH 0498/1421] hpt366: use ATA_DMA_* constants

Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/hpt366.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index cea1ac222a9..0feb66c720e 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -3,7 +3,7 @@
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
  * Portions Copyright (C) 2007		Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2008	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009	MontaVista Software, Inc.
  *
  * Thanks to HighPoint Technologies for their assistance, and hardware.
  * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
@@ -810,7 +810,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive)
 	/* get DMA command mode */
 	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	/* stop DMA */
-	outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
+	outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
 	hpt370_clear_engine(drive);
 }
 
@@ -827,11 +827,11 @@ static int hpt370_dma_end(ide_drive_t *drive)
 	ide_hwif_t *hwif	= drive->hwif;
 	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 
-	if (dma_stat & 0x01) {
+	if (dma_stat & ATA_DMA_ACTIVE) {
 		/* wait a little */
 		udelay(20);
 		dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-		if (dma_stat & 0x01)
+		if (dma_stat & ATA_DMA_ACTIVE)
 			hpt370_irq_timeout(drive);
 	}
 	return ide_dma_end(drive);
@@ -853,7 +853,7 @@ static int hpt374_dma_test_irq(ide_drive_t *drive)
 
 	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
 	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
+	if (dma_stat & ATA_DMA_INTR)
 		return 1;
 
 	return 0;
-- 
GitLab


From d5f840bf74c09ca5a31e518c9d984999926b5f44 Mon Sep 17 00:00:00 2001
From: Jack Stone <jwjstone@fastmail.fm>
Date: Sat, 18 Apr 2009 17:42:19 +0200
Subject: [PATCH 0499/1421] ide: Remove void casts

Remove uneeded void casts

Signed-off-by: Jack Stone <jwjstone@fastmail.fm>
Cc: jeff@garzik.org
Cc: kernel-janitors@vger.kernel.org
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 052b9bf1f8f..f76e4e6b408 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1682,7 +1682,7 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
 	 * The +2 is +1 for the stop command and +1 to allow for
 	 * aligning the start address to a multiple of 16 bytes.
 	 */
-	pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+	pmif->dma_table_cpu = pci_alloc_consistent(
 		dev,
 		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
 		&hwif->dmatable_dma);
-- 
GitLab


From f505d49ffd25ed062e76ffd17568d3937fcd338c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Sat, 18 Apr 2009 17:42:20 +0200
Subject: [PATCH 0500/1421] ide: fix barriers support

Freeing non-slab objects is bad and results in an oops.  Fix it.

Reported-and-tested-by: Andrew Price <andy@andrewprice.me.uk>
Cc: Theodore Tso <tytso@mit.edu>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-io.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 2ae02b8d7f8..35dc38d3b2c 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -102,11 +102,14 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
 			drive->dev_flags |= IDE_DFLAG_PARKED;
 	}
 
-	if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
-		memcpy(rq->special, cmd, sizeof(*cmd));
+	if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+		struct ide_cmd *orig_cmd = rq->special;
 
-	if (cmd->tf_flags & IDE_TFLAG_DYN)
-		kfree(cmd);
+		if (cmd->tf_flags & IDE_TFLAG_DYN)
+			kfree(orig_cmd);
+		else
+			memcpy(orig_cmd, cmd, sizeof(*cmd));
+	}
 }
 
 /* obsolete, blk_rq_bytes() should be used instead */
-- 
GitLab


From 15da90b516e9da92cc1d90001e640fd6707d0e27 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 18 Apr 2009 17:42:20 +0200
Subject: [PATCH 0501/1421] cs5536: define dma_sff_read_status() method

The driver somehow got merged with the initializer for the dma_sff_read_status()
method missing which caused kernel panic on bootup.

This should fix the kernel.org bug #13026...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/cs5536.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 353a35bbba6..0332a95eefd 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -236,6 +236,7 @@ static const struct ide_dma_ops cs5536_dma_ops = {
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
+	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
 static const struct ide_port_info cs5536_info = {
-- 
GitLab


From a21e25536169432cf9174d631972bc1cd4c75062 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 18 Apr 2009 17:23:41 +0200
Subject: [PATCH 0502/1421] PM/Hibernate: Fix memory shrinking

Commit d979677c4c0 ("mm: shrink_all_memory(): use sc.nr_reclaimed")
broke the memory shrinking used by hibernation, becuse it did not update
shrink_all_zones() in accordance with the other changes it made.

Fix this by making shrink_all_zones() update sc->nr_reclaimed instead of
overwriting its value.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13058

Reported-and-tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmscan.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 39fdfb14eea..99155b7b812 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2088,13 +2088,13 @@ static void shrink_all_zones(unsigned long nr_pages, int prio,
 				nr_reclaimed += shrink_list(l, nr_to_scan, zone,
 								sc, prio);
 				if (nr_reclaimed >= nr_pages) {
-					sc->nr_reclaimed = nr_reclaimed;
+					sc->nr_reclaimed += nr_reclaimed;
 					return;
 				}
 			}
 		}
 	}
-	sc->nr_reclaimed = nr_reclaimed;
+	sc->nr_reclaimed += nr_reclaimed;
 }
 
 /*
@@ -2115,6 +2115,7 @@ unsigned long shrink_all_memory(unsigned long nr_pages)
 		.may_unmap = 0,
 		.may_writepage = 1,
 		.isolate_pages = isolate_pages_global,
+		.nr_reclaimed = 0,
 	};
 
 	current->reclaim_state = &reclaim_state;
-- 
GitLab


From 4af94f39004a0d1a074e7573457e238a29557848 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 17 Apr 2009 18:30:28 -0700
Subject: [PATCH 0503/1421] doc: fix kernel-parameters.txt mistaken deletions

Re-add missing kernel-parameters documentation that was accidentally
deleted in commit 0cb55ad2.

Thanks to Ingo and Weidong Han for the heads-up on this.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Ingo Molnar <mingo@elte.hu>
cc: Len Brown <lenb@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt | 38 +++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a19f021f081..600cdd72900 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -231,6 +231,35 @@ and is between 256 and 4096 characters. It is defined in the file
  			power state again in power transition.
  			1 : disable the power state check
 
+	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
+			Format: { level | edge | high | low }
+
+	acpi_serialize	[HW,ACPI] force serialization of AML methods
+
+	acpi_skip_timer_override [HW,ACPI]
+			Recognize and ignore IRQ0/pin2 Interrupt Override.
+			For broken nForce2 BIOS resulting in XT-PIC timer.
+
+	acpi_sleep=	[HW,ACPI] Sleep options
+			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+				  old_ordering, s4_nonvs }
+			See Documentation/power/video.txt for information on
+			s3_bios and s3_mode.
+			s3_beep is for debugging; it makes the PC's speaker beep
+			as soon as the kernel's real-mode entry point is called.
+			s4_nohwsig prevents ACPI hardware signature from being
+			used during resume from hibernation.
+			old_ordering causes the ACPI 1.0 ordering of the _PTS
+			control method, with respect to putting devices into
+			low power states, to be enforced (the ACPI 2.0 ordering
+			of _PTS is used by default).
+			s4_nonvs prevents the kernel from saving/restoring the
+			ACPI NVS memory during hibernation.
+
+	acpi_use_timer_override [HW,ACPI]
+			Use timer override. For some broken Nvidia NF5 boards
+			that require a timer override, but don't have HPET
+
 	acpi_enforce_resources=	[ACPI]
 			{ strict | lax | no }
 			Check for resource conflicts between native drivers
@@ -250,6 +279,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	ad1848=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<type>
 
+	add_efi_memmap	[EFI; X86] Include EFI memory map in
+			kernel's map of available physical RAM.
+
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
@@ -1838,6 +1870,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
+	ports=		[IP_VS_FTP] IPVS ftp helper module
+			Default is 21.
+			Up to 8 (IP_VS_APP_MAX_PORTS) ports
+			may be specified.
+			Format: <port>,<port>....
+
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
-- 
GitLab


From 3f8c0df43dec51fbdfb2627f7574aa00a5fce98c Mon Sep 17 00:00:00 2001
From: Arjan Opmeer <arjan@opmeer.net>
Date: Sat, 18 Apr 2009 19:05:40 -0700
Subject: [PATCH 0504/1421] Input: elantech - provide a workaround for jumpy
 cursor on firmware 2.34
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It seems that Elantech touchpad firmware version 2.34 on the Hercules eCAFÉ
suffers from a problem where bogus coordinates get reported at the beginning
of a touch action. This causes the mouse cursor or the scrolled page to
jump.

Included patch provides a workaround that discards mouse packets that are
likely to contain bogus coordinates. The workaround is activated when we
detect touchpad with fimware version 2.34.

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/elantech.c | 27 +++++++++++++++++++++++++--
 drivers/input/mouse/elantech.h |  5 +++--
 2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6ab0eb1ada1..d3b59167379 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1,7 +1,7 @@
 /*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
  *
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	struct elantech_data *etd = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	int fingers;
+	static int old_fingers;
 
 	if (etd->fw_version_maj == 0x01) {
 		/* byte 0:  D   U  p1  p2   1  p3   R   L
@@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 		fingers = (packet[0] & 0xc0) >> 6;
 	}
 
+	if (etd->jumpy_cursor) {
+		/* Discard packets that are likely to have bogus coordinates */
+		if (fingers > old_fingers) {
+			elantech_debug("elantech.c: discarding packet\n");
+			goto discard_packet_v1;
+		}
+	}
+
 	input_report_key(dev, BTN_TOUCH, fingers != 0);
 
 	/* byte 2: x7  x6  x5  x4  x3  x2  x1  x0
@@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	}
 
 	input_sync(dev);
+
+ discard_packet_v1:
+	old_fingers = fingers;
 }
 
 /*
@@ -662,6 +674,17 @@ int elantech_init(struct psmouse *psmouse)
 		param[0], param[1], param[2]);
 	etd->capabilities = param[0];
 
+	/*
+	 * This firmware seems to suffer from misreporting coordinates when
+	 * a touch action starts causing the mouse cursor or scrolled page
+	 * to jump. Enable a workaround.
+	 */
+	if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+		pr_info("elantech.c: firmware version 2.34 detected, "
+			"enabling jumpy cursor workaround\n");
+		etd->jumpy_cursor = 1;
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
 		goto init_fail;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index bee282b540b..ed848cc8081 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -1,7 +1,7 @@
 /*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
  *
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -104,6 +104,7 @@ struct elantech_data {
 	unsigned char fw_version_min;
 	unsigned char hw_version;
 	unsigned char paritycheck;
+	unsigned char jumpy_cursor;
 	unsigned char parity[256];
 };
 
-- 
GitLab


From b2546df69b6bef19513112fd54ffb5d37cb3eb7a Mon Sep 17 00:00:00 2001
From: Arjan Opmeer <arjan@opmeer.net>
Date: Sat, 18 Apr 2009 19:10:17 -0700
Subject: [PATCH 0505/1421] Input: elantech - make sure touchpad is really in
 absolute mode

There exist laptops with Elantech touchpads where switching to absolute mode
does not happen, although writing the configuration register succeeds
without error. Reading back the register afterwards reveils that the
absolute mode bit is not set as if masked out by the touchpad firmware.

Always read back register 0x10, make sure that for hardware version 1 the
absolute mode bit is actually set and fail otherwise. This prevents the case
where the touchpad is claimed by the Elantech driver but is nonetheless not
working.

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/elantech.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index d3b59167379..4bc78892ba9 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -375,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 			rc = -1;
 			break;
 		}
+	}
+
+	if (rc == 0) {
 		/*
-		 * Read back reg 0x10. The touchpad is probably initalising
-		 * and not ready until we read back the value we just wrote.
+		 * Read back reg 0x10. For hardware version 1 we must make
+		 * sure the absolute mode bit is set. For hardware version 2
+		 * the touchpad is probably initalising and not ready until
+		 * we read back the value we just wrote.
 		 */
 		do {
 			rc = elantech_read_reg(psmouse, 0x10, &val);
@@ -385,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 				break;
 			tries--;
 			elantech_debug("elantech.c: retrying read (%d).\n",
-				tries);
+					tries);
 			msleep(ETP_READ_BACK_DELAY);
 		} while (tries > 0);
-		if (rc)
+
+		if (rc) {
 			pr_err("elantech.c: failed to read back register 0x10.\n");
-		break;
+		} else if (etd->hw_version == 1 &&
+			   !(val & ETP_R10_ABSOLUTE_MODE)) {
+			pr_err("elantech.c: touchpad refuses "
+				"to switch to absolute mode.\n");
+			rc = -1;
+		}
 	}
 
 	if (rc)
-- 
GitLab


From ff54250a0ebab7f90a5f848a0ba63f999830c872 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 18 Apr 2009 21:44:24 -0700
Subject: [PATCH 0506/1421] Remove 'recurse into child resources' logic from
 'reserve_region_with_split()'

This function is not actually used right now, since the original use
case for it was done with insert_resource_expand_to_fit() instead.

However, we now have another usage case that wants to basically do a
"reserve IO resource, splitting around existing resources", however that
one doesn't actually want the "recurse into the conflicting resource"
logic at all.

And since recursing into the conflicting resource was the most complex
part, and isn't wanted, just remove it.  Maybe we'll some day want both
versions, but we can just resurrect the logic then.

Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/resource.c | 46 ++++++++++++----------------------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

diff --git a/kernel/resource.c b/kernel/resource.c
index fd5d7d574bb..ac5f3a36923 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -533,43 +533,21 @@ static void __init __reserve_region_with_split(struct resource *root,
 	res->end = end;
 	res->flags = IORESOURCE_BUSY;
 
-	for (;;) {
-		conflict = __request_resource(parent, res);
-		if (!conflict)
-			break;
-		if (conflict != parent) {
-			parent = conflict;
-			if (!(conflict->flags & IORESOURCE_BUSY))
-				continue;
-		}
-
-		/* Uhhuh, that didn't work out.. */
-		kfree(res);
-		res = NULL;
-		break;
-	}
-
-	if (!res) {
-		/* failed, split and try again */
-
-		/* conflict covered whole area */
-		if (conflict->start <= start && conflict->end >= end)
-			return;
+	conflict = __request_resource(parent, res);
+	if (!conflict)
+		return;
 
-		if (conflict->start > start)
-			__reserve_region_with_split(root, start, conflict->start-1, name);
-		if (!(conflict->flags & IORESOURCE_BUSY)) {
-			resource_size_t common_start, common_end;
+	/* failed, split and try again */
+	kfree(res);
 
-			common_start = max(conflict->start, start);
-			common_end = min(conflict->end, end);
-			if (common_start < common_end)
-				__reserve_region_with_split(root, common_start, common_end, name);
-		}
-		if (conflict->end < end)
-			__reserve_region_with_split(root, conflict->end+1, end, name);
-	}
+	/* conflict covered whole area */
+	if (conflict->start <= start && conflict->end >= end)
+		return;
 
+	if (conflict->start > start)
+		__reserve_region_with_split(root, start, conflict->start-1, name);
+	if (conflict->end < end)
+		__reserve_region_with_split(root, conflict->end+1, end, name);
 }
 
 void __init reserve_region_with_split(struct resource *root,
-- 
GitLab


From 2fdb11449ca82f4f1907fce4929df4e0bd267c50 Mon Sep 17 00:00:00 2001
From: "Denis V. Lunev" <den@openvz.org>
Date: Sun, 12 Apr 2009 08:14:46 +0100
Subject: [PATCH 0507/1421] mtd: mtd in mtd_release is unused without
 CONFIG_MTD_CHAR

drivers/mtd/mtdcore.c: In function 'mtd_release':
drivers/mtd/mtdcore.c:51: warning: unused variable 'mtd'

[akpm: make it actually build]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdcore.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index fdd6ae85939..051b4d4ed21 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -48,11 +48,11 @@ static LIST_HEAD(mtd_notifiers);
  */
 static void mtd_release(struct device *dev)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	dev_t index = MTD_DEVT(dev_to_mtd(dev)->index);
 
 	/* remove /dev/mtdXro node if needed */
-	if (MTD_DEVT(mtd->index))
-		device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1);
+	if (index)
+		device_destroy(mtd_class, index + 1);
 }
 
 static ssize_t mtd_type_show(struct device *dev,
-- 
GitLab


From e7693548950ea5801d5d8b00414aed37033cf972 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <dedekind@infradead.org>
Date: Sat, 18 Apr 2009 12:29:42 +0300
Subject: [PATCH 0508/1421] mtd: expose subpage size via sysfs

MTD has got sysfs support in 2.6.30-rc1. But subpage size is not
exposed there - do this.

UBI utilities badly need this parameter. At the moment there is
no way to get subpage size - ioctls do not return it. And we
just got sysfs support, so we can easilly extend it with this
additional parameter.

This can be merged late in the development cycle because:
1. sysfs support has been just added - there are no users for
   it so far, even.
2. UBI utilities really need this parameter, and it is better
   not to delay this.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdcore.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 051b4d4ed21..bccb4b1ffc4 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -132,6 +132,17 @@ static ssize_t mtd_writesize_show(struct device *dev,
 }
 static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
 
+static ssize_t mtd_subpagesize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_to_mtd(dev);
+	unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
+
+}
+static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
+
 static ssize_t mtd_oobsize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -169,6 +180,7 @@ static struct attribute *mtd_attrs[] = {
 	&dev_attr_size.attr,
 	&dev_attr_erasesize.attr,
 	&dev_attr_writesize.attr,
+	&dev_attr_subpagesize.attr,
 	&dev_attr_oobsize.attr,
 	&dev_attr_numeraseregions.attr,
 	&dev_attr_name.attr,
-- 
GitLab


From f14875a3e0cc35d7dbe15ee39763a6ae922e7034 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sat, 18 Apr 2009 23:51:08 +0200
Subject: [PATCH 0509/1421] kbuild: support include/generated

We need a location for generated files.
Today they are spread over several places and bringing them
together to a common place makes it obvious hat is generated
and what isreal files.

Al Viro originally suggested: include/gen
Linus suggested to spell it out.

This patch implement support for

    include/generated

All files in include/generated are ignored by git.
include/generated is removed during "make mrproper".

With this we are ready to implement support for include/generated
in the various architctures and in the base kernel.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
---
 .gitignore | 1 +
 Makefile   | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/.gitignore b/.gitignore
index 869e1a3b64b..51bd99d6a26 100644
--- a/.gitignore
+++ b/.gitignore
@@ -49,6 +49,7 @@ include/linux/compile.h
 include/linux/version.h
 include/linux/utsrelease.h
 include/linux/bounds.h
+include/generated
 
 # stgit generated dirs
 patches-*
diff --git a/Makefile b/Makefile
index bfdef56add3..6f4208ff2d1 100644
--- a/Makefile
+++ b/Makefile
@@ -1200,7 +1200,7 @@ CLEAN_FILES +=	vmlinux System.map \
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include2 usr/include
+MRPROPER_DIRS  += include/config include2 usr/include include/generated
 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
-- 
GitLab


From 720097d895956c0bf15b8440f7845159a04b74da Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 19 Apr 2009 11:04:26 +0200
Subject: [PATCH 0510/1421] kbuild: introduce subdir-ccflags-y

Following patch introduce support for setting options
to gcc that has effect for current directory and all
subdirectories.

The typical use case are an architecture or a subsystem that
decide to cover all files with -Werror.
Today alpha, mips and sparc uses -Werror in almost all their
Makefile- with subdir-ccflag-y it is now simpler to do so
as only the top-level directories needs to be covered.

Likewise if we decide to cover a full subsystem such
as net/ with -Werror this is done by adding a single
line to net/Makefile.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 Documentation/kbuild/makefiles.txt | 10 ++++++++++
 scripts/Makefile.build             |  3 +++
 scripts/Makefile.lib               |  9 +++++++--
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index d4b05672f9f..d76cfd8712e 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -316,6 +316,16 @@ more details, with real examples.
 		#arch/m68k/fpsp040/Makefile
 		ldflags-y := -x
 
+    subdir-ccflags-y, subdir-asflags-y
+	The two flags listed above are similar to ccflags-y and as-falgs-y.
+	The difference is that the subdir- variants has effect for the kbuild
+	file where tey are present and all subdirectories.
+	Options specified using subdir-* are added to the commandline before
+	the options specified using the non-subdir variants.
+
+	Example:
+		subdir-ccflags-y := -Werror
+
     CFLAGS_$@, AFLAGS_$@
 
 	CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 39a9642927d..5c4b7a400c1 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -27,6 +27,9 @@ ccflags-y  :=
 cppflags-y :=
 ldflags-y  :=
 
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
 # Read auto.conf if it exists, otherwise ignore
 -include include/config/auto.conf
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 979619574f7..cba61ca403c 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -4,6 +4,11 @@ ccflags-y  += $(EXTRA_CFLAGS)
 cppflags-y += $(EXTRA_CPPFLAGS)
 ldflags-y  += $(EXTRA_LDFLAGS)
 
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
 # Figure out what we need to build from the various variables
 # ===========================================================================
 
@@ -104,10 +109,10 @@ else
 debug_flags =
 endif
 
-orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)                     \
+orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
                  $(ccflags-y) $(CFLAGS_$(basetarget).o)
 _c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
-_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS)                     \
+_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
                  $(asflags-y) $(AFLAGS_$(basetarget).o)
 _cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
 
-- 
GitLab


From 88df781afb788fa588dbf2e77f205214022a8893 Mon Sep 17 00:00:00 2001
From: Matias Zabaljauregui <zabaljauregui@gmail.com>
Date: Wed, 8 Apr 2009 17:58:39 -0300
Subject: [PATCH 0511/1421] lguest: fix crash on vmlinux images

Typical message: 'lguest: unhandled trap 6 at 0x418726 (0x0)'

vmlinux guests were broken by 4cd8b5e2a159f18a1507f1187b44a1acbfa6341b
'lguest: use KVM hypercalls', which rewrites guest text from kvm hypercalls
to trap 31.

The Launcher mmaps the kernel image.  The Guest executes and
immediately faults in the first text page (read-only).  Then it hits a
hypercall, and we rewrite that hypercall, causing a copy-on-write.
But the Guest pagetables still refer to the old page: we fault again,
but as Host we see the hypercall already rewritten, and pass the fault
back to the Guest.  The Guest hasn't set up an IDT yet, so we kill it.

This doesn't happen with bzImages: they unpack themselves and so the
text pages are already read-write.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Patrick McHardy <kaber@trash.net>
---
 drivers/lguest/x86/core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index a6b717644be..d6d7ac0982a 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -324,6 +324,11 @@ static void rewrite_hypercall(struct lg_cpu *cpu)
 	u8 insn[3] = {0xcd, 0x1f, 0x90};
 
 	__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
+	/* The above write might have caused a copy of that page to be made
+	 * (if it was read-only).  We need to make sure the Guest has
+	 * up-to-date pagetables.  As this doesn't happen often, we can just
+	 * drop them all. */
+	guest_pagetable_clear_all(cpu);
 }
 
 static bool is_hypercall(struct lg_cpu *cpu)
-- 
GitLab


From a489f0b555b753f9df8ddc24c7e74f657ef7ee7b Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Sun, 19 Apr 2009 23:14:00 -0600
Subject: [PATCH 0512/1421] lguest: fix guest crash on non-linear addresses in
 gdt pvops

Fixes guest crash 'lguest: bad read address 0x4800000 len 256'

The new per-cpu allocator ends up handing a non-linear address to
write_gdt_entry.  We do __pa() on it, and hand it to the host, which
kills us.

I've long wanted to make the hypercall "LOAD_GDT_ENTRY" to match the IDT
code, but had no pressing reason until now.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: lguest@ozlabs.org
---
 arch/x86/include/asm/lguest_hcall.h |  2 +-
 arch/x86/lguest/boot.c              | 16 +++++++++-------
 drivers/lguest/lg.h                 |  3 ++-
 drivers/lguest/segments.c           | 13 +++++++------
 drivers/lguest/x86/core.c           |  4 ++--
 5 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index 0f4ee7148af..faae1996487 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -5,7 +5,6 @@
 #define LHCALL_FLUSH_ASYNC	0
 #define LHCALL_LGUEST_INIT	1
 #define LHCALL_SHUTDOWN		2
-#define LHCALL_LOAD_GDT		3
 #define LHCALL_NEW_PGTABLE	4
 #define LHCALL_FLUSH_TLB	5
 #define LHCALL_LOAD_IDT_ENTRY	6
@@ -17,6 +16,7 @@
 #define LHCALL_SET_PMD		15
 #define LHCALL_LOAD_TLS		16
 #define LHCALL_NOTIFY		17
+#define LHCALL_LOAD_GDT_ENTRY	18
 
 #define LGUEST_TRAP_ENTRY 0x1F
 
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index e94a11e42f9..a2085368a3d 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -273,15 +273,15 @@ static void lguest_load_idt(const struct desc_ptr *desc)
  * controls the entire thing and the Guest asks it to make changes using the
  * LOAD_GDT hypercall.
  *
- * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
- * hypercall and use that repeatedly to load a new IDT.  I don't think it
- * really matters, but wouldn't it be nice if they were the same?  Wouldn't
- * it be even better if you were the one to send the patch to fix it?
+ * This is the exactly like the IDT code.
  */
 static void lguest_load_gdt(const struct desc_ptr *desc)
 {
-	BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES);
-	kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES);
+	unsigned int i;
+	struct desc_struct *gdt = (void *)desc->address;
+
+	for (i = 0; i < (desc->size+1)/8; i++)
+		kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
 }
 
 /* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
@@ -291,7 +291,9 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 				   const void *desc, int type)
 {
 	native_write_gdt_entry(dt, entrynum, desc, type);
-	kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES);
+	/* Tell Host about this new entry. */
+	kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
+		       dt[entrynum].a, dt[entrynum].b);
 }
 
 /* OK, I lied.  There are three "thread local storage" GDT entries which change
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index ac8a4a3741b..af92a176697 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -158,7 +158,8 @@ void free_interrupts(void);
 /* segments.c: */
 void setup_default_gdt_entries(struct lguest_ro_state *state);
 void setup_guest_gdt(struct lg_cpu *cpu);
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num);
+void load_guest_gdt_entry(struct lg_cpu *cpu, unsigned int i,
+			  u32 low, u32 hi);
 void guest_load_tls(struct lg_cpu *cpu, unsigned long tls_array);
 void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt);
 void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 4f15439b7f1..7ede64ffeef 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -144,18 +144,19 @@ void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
 			gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
- * We copy it from the Guest and tweak the entries. */
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num)
+/*H:620 This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in. */
+void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
 	/* We assume the Guest has the same number of GDT entries as the
 	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
 	if (num > ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
-	/* We read the whole thing in, then fix it up. */
-	__lgread(cpu, cpu->arch.gdt, table, num * sizeof(cpu->arch.gdt[0]));
-	fixup_gdt_table(cpu, 0, ARRAY_SIZE(cpu->arch.gdt));
+	/* Set it up, then fix it. */
+	cpu->arch.gdt[num].a = lo;
+	cpu->arch.gdt[num].b = hi;
+	fixup_gdt_table(cpu, num, num+1);
 	/* Mark that the GDT changed so the core knows it has to copy it again,
 	 * even if the Guest is run on the same CPU. */
 	cpu->changed |= CHANGED_GDT;
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index d6d7ac0982a..1a83910f674 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -568,8 +568,8 @@ void __exit lguest_arch_host_fini(void)
 int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 {
 	switch (args->arg0) {
-	case LHCALL_LOAD_GDT:
-		load_guest_gdt(cpu, args->arg1, args->arg2);
+	case LHCALL_LOAD_GDT_ENTRY:
+		load_guest_gdt_entry(cpu, args->arg1, args->arg2, args->arg3);
 		break;
 	case LHCALL_LOAD_IDT_ENTRY:
 		load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3);
-- 
GitLab


From 84a139a985300901dfad99bd93c7345d180af860 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 16 Apr 2009 21:14:04 -0300
Subject: [PATCH 0513/1421] virtio: fix suspend when using virtio_balloon

Break out of wait_event_interruptible() if freezing has been requested,
in the vballoon thread. Without this change vballoon refuses to stop and
the system can't suspend.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
---
 drivers/virtio/virtio_balloon.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 59268266b79..9c76a061a04 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -190,7 +190,8 @@ static int balloon(void *_vballoon)
 		try_to_freeze();
 		wait_event_interruptible(vb->config_change,
 					 (diff = towards_target(vb)) != 0
-					 || kthread_should_stop());
+					 || kthread_should_stop()
+					 || freezing(current));
 		if (diff > 0)
 			fill_balloon(vb, diff);
 		else if (diff < 0)
-- 
GitLab


From 9536c26b31ae34ba6371a1b8f406028e9756f913 Mon Sep 17 00:00:00 2001
From: Matt Kraai <kraai@ftbfs.org>
Date: Thu, 16 Apr 2009 23:46:20 -0700
Subject: [PATCH 0514/1421] lguest: tell git to ignore
 Documentation/lguest/lguest

This is the example lguest launcher binary.

Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 Documentation/lguest/.gitignore | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 Documentation/lguest/.gitignore

diff --git a/Documentation/lguest/.gitignore b/Documentation/lguest/.gitignore
new file mode 100644
index 00000000000..115587fd5f6
--- /dev/null
+++ b/Documentation/lguest/.gitignore
@@ -0,0 +1 @@
+lguest
-- 
GitLab


From 38cfe968040250b89c3554a17219a9fda45b9665 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Sun, 19 Apr 2009 23:14:02 -0600
Subject: [PATCH 0515/1421] lguest: document 32-bit and PAE requirements

Robert noted that we don't actually document that lguest is 32-bit only,
nor that PAE must be off (CONFIG_PAE is now prompted for if HIGHMEM is
set to "off).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: lguest@ozlabs.org
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
---
 Documentation/lguest/lguest.txt | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 29510dc5151..28c747362f9 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -3,11 +3,11 @@
  /,    /`      - or, A Young Coder's Illustrated Hypervisor
  \\"--\\    http://lguest.ozlabs.org
 
-Lguest is designed to be a minimal hypervisor for the Linux kernel, for
-Linux developers and users to experiment with virtualization with the
-minimum of complexity.  Nonetheless, it should have sufficient
-features to make it useful for specific tasks, and, of course, you are
-encouraged to fork and enhance it (see drivers/lguest/README).
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity.  Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
 
 Features:
 
@@ -37,6 +37,7 @@ Running Lguest:
      "Paravirtualized guest support" = Y
         "Lguest guest support" = Y
      "High Memory Support" = off/4GB
+     "PAE (Physical Address Extension) Support" = N
      "Alignment value to which kernel should be aligned" = 0x100000
         (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
          CONFIG_PHYSICAL_ALIGN=0x100000)
-- 
GitLab


From e91fb9137dd235ab959d7675d0e4104974dad5eb Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 17 Apr 2009 11:37:35 +0200
Subject: [PATCH 0516/1421] [ARM] pxa/palm27x: General fix for Palm27x aSoC
 driver

Firstly, this patch makes the palm27x asoc driver a little more sane. Also,
since all affected devices use GPIO95 as AC97_nRESET, this patch sets that
properly. Affected are PalmT5, TX and LifeDrive.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/palmasoc.h |  7 +-----
 arch/arm/mach-pxa/palmld.c                | 18 ++++++++++++---
 arch/arm/mach-pxa/palmt5.c                | 18 ++++++++++++---
 arch/arm/mach-pxa/palmtx.c                | 23 ++++++++++++++++++-
 sound/soc/pxa/palm27x.c                   | 27 +++++++++++++++++++----
 5 files changed, 76 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
index 6c4b1f7de20..58afb30d529 100644
--- a/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ b/arch/arm/mach-pxa/include/mach/palmasoc.h
@@ -1,13 +1,8 @@
 #ifndef _INCLUDE_PALMASOC_H_
 #define _INCLUDE_PALMASOC_H_
+
 struct palm27x_asoc_info {
 	int	jack_gpio;
 };
 
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
 #endif
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ecf5910e39d..1cec1806f00 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -477,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmld_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmld_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -544,6 +556,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_backlight,
 	&palmld_leds,
 	&power_supply,
+	&palmld_asoc,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -573,11 +586,10 @@ static void __init palmld_init(void)
 
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmld_ac97_pdata);
 	pxa_set_ficp_info(&palmld_ficp_platform_data);
 	pxa_set_keypad_info(&palmld_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index d7f81068c61..30662363907 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -420,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmt5_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmt5_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -486,6 +498,7 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmt5_backlight,
 	&power_supply,
+	&palmt5_asoc,
 };
 
 /* setup udc GPIOs initial state */
@@ -504,12 +517,11 @@ static void __init palmt5_init(void)
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
+	pxa_set_ac97_info(&palmt5_ac97_pdata);
 	pxa_set_udc_info(&palmt5_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 14393d0ad8b..e2d44b1a8a9 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -40,6 +40,7 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -433,6 +434,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 	.batt_name	= "main-batt",
 };
 
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmtx_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmtx_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -495,6 +515,7 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmtx_backlight,
 	&power_supply,
+	&palmtx_asoc,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -529,8 +550,8 @@ static void __init palmtx_init(void)
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
+	pxa_set_ac97_info(&palmtx_ac97_pdata);
 	pxa_set_udc_info(&palmtx_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 48a73f64500..44fcc4e01e0 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -200,7 +200,7 @@ static struct snd_soc_device palm27x_snd_devdata = {
 
 static struct platform_device *palm27x_snd_device;
 
-static int __init palm27x_asoc_init(void)
+static int palm27x_asoc_probe(struct platform_device *pdev)
 {
 	int ret;
 
@@ -208,6 +208,10 @@ static int __init palm27x_asoc_init(void)
 		machine_is_palmld()))
 		return -ENODEV;
 
+	if (pdev->dev.platform_data)
+		palm27x_ep_gpio = ((struct palm27x_asoc_info *)
+			(pdev->dev.platform_data))->jack_gpio;
+
 	ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
 	if (ret)
 		return ret;
@@ -245,16 +249,31 @@ err_alloc:
 	return ret;
 }
 
-static void __exit palm27x_asoc_exit(void)
+static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
 {
 	free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
 	gpio_free(palm27x_ep_gpio);
 	platform_device_unregister(palm27x_snd_device);
+	return 0;
 }
 
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data)
+static struct platform_driver palm27x_wm9712_driver = {
+	.probe		= palm27x_asoc_probe,
+	.remove		= __devexit_p(palm27x_asoc_remove),
+	.driver		= {
+		.name		= "palm27x-asoc",
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init palm27x_asoc_init(void)
+{
+	return platform_driver_register(&palm27x_wm9712_driver);
+}
+
+static void __exit palm27x_asoc_exit(void)
 {
-	palm27x_ep_gpio = data->jack_gpio;
+	platform_driver_unregister(&palm27x_wm9712_driver);
 }
 
 module_init(palm27x_asoc_init);
-- 
GitLab


From a48dc30da44769ea3f3562c18f54878a9a3e78a1 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 15 Apr 2009 13:56:08 +0200
Subject: [PATCH 0517/1421] [ARM] pxa/pcm990: start external GPIOs immediately
 after built-in ones

As a result of an off-by-1 error pcm990 leaves one unused GPIO number between
built-in GPIOs and the pca9536 extender. Fix it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/pcm990-baseboard.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6112740b4ae..6c12b5a3132 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
 #include <linux/i2c/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= NR_BUILTIN_GPIO + 1,
+	.gpio_base	= NR_BUILTIN_GPIO,
 };
 
 static int gpio_bus_switch;
@@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
 	int ret;
 
 	if (!gpio_bus_switch) {
-		ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+		ret = gpio_request(NR_BUILTIN_GPIO, "camera");
 		if (!ret) {
-			gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+			gpio_bus_switch = NR_BUILTIN_GPIO;
 			gpio_direction_output(gpio_bus_switch, 0);
 		} else
 			gpio_bus_switch = -EINVAL;
-- 
GitLab


From 613cbe3d4870429bf2e816d4bbe3146d157ee5c1 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Sun, 19 Apr 2009 18:40:43 +0200
Subject: [PATCH 0518/1421] Don't set relatime when noatime is specified

Since commit 0a1c01c9477602ee8b44548a9405b2c1d587b5a2 ("Make relatime
default") when a file system is mounted explicitely with noatime it gets
both the MNT_RELATIME and MNT_NOATIME bits set.

This shows up like this in /proc/mounts:

  /dev/xxx /yyy ext3 rw,noatime,relatime,errors=continue,data=writeback 0 0

That looks strange.  The VFS uses noatime in this case, but both flags
are set.  So it's more a cosmetic issue, but still better to fix.

Cc: mjg@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/namespace.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/namespace.c b/fs/namespace.c
index c6f54e4c429..d9138f81ec1 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1920,8 +1920,9 @@ long do_mount(char *dev_name, char *dir_name, char *type_page,
 	if (data_page)
 		((char *)data_page)[PAGE_SIZE - 1] = 0;
 
-	/* Default to relatime */
-	mnt_flags |= MNT_RELATIME;
+	/* Default to relatime unless overriden */
+	if (!(flags & MS_NOATIME))
+		mnt_flags |= MNT_RELATIME;
 
 	/* Separate the per-mountpoint flags */
 	if (flags & MS_NOSUID)
-- 
GitLab


From 42a17ad2762f465d291c3bc0b6ed2b3738f65481 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 18 Apr 2009 11:30:56 +0200
Subject: [PATCH 0519/1421] <linux/seccomp.h> needs to include <linux/errno.h>.

<linux/seccomp.h> uses EINVAL so should include <linux/errno.h>.  This
fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/seccomp.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 262a8dccfa8..167c33361d9 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -21,6 +21,8 @@ extern long prctl_set_seccomp(unsigned long);
 
 #else /* CONFIG_SECCOMP */
 
+#include <linux/errno.h>
+
 typedef struct { } seccomp_t;
 
 #define secure_computing(x) do { } while (0)
-- 
GitLab


From c0b7988200a82290287c6f4cd49585007f73175a Mon Sep 17 00:00:00 2001
From: Samuel Thibault <samuel.thibault@ens-lyon.org>
Date: Sat, 18 Apr 2009 22:17:17 +0200
Subject: [PATCH 0520/1421] Revert "console ASCII glyph 1:1 mapping"

This reverts commit 1c55f18717304100a5f624c923f7cb6511b4116d.

Ingo Brueckl was assuming that reverting to 1:1 mapping for chars >= 128
was not useful, but it happens to be: due to the limitations of the
Linux console, when a blind user wants to read BIG5 on it, he has no
other way than loading a font without SFM and let the 1:1 mapping permit
the screen reader to get the BIG5 encoding.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/vt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 2c1d133819b..08151d4de48 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2274,7 +2274,7 @@ rescan_last_byte:
 				    continue; /* nothing to display */
 				}
 				/* Glyph not found */
-				if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
+				if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
 				    /* In legacy mode use the glyph we get by a 1:1 mapping.
 				       This would make absolutely no sense with Unicode in mind,
 				       but do this for ASCII characters since a font may lack
-- 
GitLab


From 6a7c7eaf71b636f197d73b381a2ab729ebdcfb2e Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sun, 19 Apr 2009 20:08:42 +0200
Subject: [PATCH 0521/1421] PM/Suspend: Introduce two new platform callbacks to
 avoid breakage

Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend
code ordering) changed the ordering of suspend code in such a way
that the platform .prepare() callback is now executed after the
device drivers' late suspend callbacks have run.  Unfortunately, this
turns out to break ARM platforms that need to talk via I2C to power
control devices during the .prepare() callback.

For this reason introduce two new platform suspend callbacks,
.prepare_late() and .wake(), that will be called just prior to
disabling non-boot CPUs and right after bringing them back on line,
respectively, and use them instead of .prepare() and .finish() for
ACPI suspend.  Make the PM core execute the .prepare() and .finish()
platform suspend callbacks where they were executed previously (that
is, right after calling the regular suspend methods provided by
device drivers and right before executing their regular resume
methods, respectively).

It is not necessary to make analogous changes to the hibernation
code and data structures at the moment, because they are only used
by ACPI platforms.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/sleep.c    |  8 ++++----
 include/linux/suspend.h | 36 ++++++++++++++++++++++++++----------
 kernel/power/main.c     | 24 +++++++++++++++++-------
 3 files changed, 47 insertions(+), 21 deletions(-)

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 779e4e500df..d060e6fd7fd 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -300,9 +300,9 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state)
 static struct platform_suspend_ops acpi_suspend_ops = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin,
-	.prepare = acpi_pm_prepare,
+	.prepare_late = acpi_pm_prepare,
 	.enter = acpi_suspend_enter,
-	.finish = acpi_pm_finish,
+	.wake = acpi_pm_finish,
 	.end = acpi_pm_end,
 };
 
@@ -328,9 +328,9 @@ static int acpi_suspend_begin_old(suspend_state_t pm_state)
 static struct platform_suspend_ops acpi_suspend_ops_old = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin_old,
-	.prepare = acpi_pm_disable_gpes,
+	.prepare_late = acpi_pm_disable_gpes,
 	.enter = acpi_suspend_enter,
-	.finish = acpi_pm_finish,
+	.wake = acpi_pm_finish,
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 3e3a4364cbf..795032edfc4 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -58,10 +58,17 @@ typedef int __bitwise suspend_state_t;
  *	by @begin().
  *	@prepare() is called right after devices have been suspended (ie. the
  *	appropriate .suspend() method has been executed for each device) and
- *	before the nonboot CPUs are disabled (it is executed with IRQs enabled).
- *	This callback is optional.  It returns 0 on success or a negative
- *	error code otherwise, in which case the system cannot enter the desired
- *	sleep state (@enter() and @finish() will not be called in that case).
+ *	before device drivers' late suspend callbacks are executed.  It returns
+ *	0 on success or a negative error code otherwise, in which case the
+ *	system cannot enter the desired sleep state (@prepare_late(), @enter(),
+ *	@wake(), and @finish() will not be called in that case).
+ *
+ * @prepare_late: Finish preparing the platform for entering the system sleep
+ *	state indicated by @begin().
+ *	@prepare_late is called before disabling nonboot CPUs and after
+ *	device drivers' late suspend callbacks have been executed.  It returns
+ *	0 on success or a negative error code otherwise, in which case the
+ *	system cannot enter the desired sleep state (@enter() and @wake()).
  *
  * @enter: Enter the system sleep state indicated by @begin() or represented by
  *	the argument if @begin() is not implemented.
@@ -69,19 +76,26 @@ typedef int __bitwise suspend_state_t;
  *	error code otherwise, in which case the system cannot enter the desired
  *	sleep state.
  *
- * @finish: Called when the system has just left a sleep state, right after
- *	the nonboot CPUs have been enabled and before devices are resumed (it is
- *	executed with IRQs enabled).
+ * @wake: Called when the system has just left a sleep state, right after
+ *	the nonboot CPUs have been enabled and before device drivers' early
+ *	resume callbacks are executed.
+ *	This callback is optional, but should be implemented by the platforms
+ *	that implement @prepare_late().  If implemented, it is always called
+ *	after @enter(), even if @enter() fails.
+ *
+ * @finish: Finish wake-up of the platform.
+ *	@finish is called right prior to calling device drivers' regular suspend
+ *	callbacks.
  *	This callback is optional, but should be implemented by the platforms
  *	that implement @prepare().  If implemented, it is always called after
- *	@enter() (even if @enter() fails).
+ *	@enter() and @wake(), if implemented, even if any of them fails.
  *
  * @end: Called by the PM core right after resuming devices, to indicate to
  *	the platform that the system has returned to the working state or
  *	the transition to the sleep state has been aborted.
  *	This callback is optional, but should be implemented by the platforms
- *	that implement @begin(), but platforms implementing @begin() should
- *	also provide a @end() which cleans up transitions aborted before
+ *	that implement @begin().  Accordingly, platforms implementing @begin()
+ *	should also provide a @end() which cleans up transitions aborted before
  *	@enter().
  *
  * @recover: Recover the platform from a suspend failure.
@@ -93,7 +107,9 @@ struct platform_suspend_ops {
 	int (*valid)(suspend_state_t state);
 	int (*begin)(suspend_state_t state);
 	int (*prepare)(void);
+	int (*prepare_late)(void);
 	int (*enter)(suspend_state_t state);
+	void (*wake)(void);
 	void (*finish)(void);
 	void (*end)(void);
 	void (*recover)(void);
diff --git a/kernel/power/main.c b/kernel/power/main.c
index f172f41858b..f99ed6a75ea 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -291,20 +291,26 @@ static int suspend_enter(suspend_state_t state)
 
 	device_pm_lock();
 
+	if (suspend_ops->prepare) {
+		error = suspend_ops->prepare();
+		if (error)
+			goto Done;
+	}
+
 	error = device_power_down(PMSG_SUSPEND);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down\n");
-		goto Done;
+		goto Platfrom_finish;
 	}
 
-	if (suspend_ops->prepare) {
-		error = suspend_ops->prepare();
+	if (suspend_ops->prepare_late) {
+		error = suspend_ops->prepare_late();
 		if (error)
 			goto Power_up_devices;
 	}
 
 	if (suspend_test(TEST_PLATFORM))
-		goto Platfrom_finish;
+		goto Platform_wake;
 
 	error = disable_nonboot_cpus();
 	if (error || suspend_test(TEST_CPUS))
@@ -326,13 +332,17 @@ static int suspend_enter(suspend_state_t state)
  Enable_cpus:
 	enable_nonboot_cpus();
 
- Platfrom_finish:
-	if (suspend_ops->finish)
-		suspend_ops->finish();
+ Platform_wake:
+	if (suspend_ops->wake)
+		suspend_ops->wake();
 
  Power_up_devices:
 	device_power_up(PMSG_RESUME);
 
+ Platfrom_finish:
+	if (suspend_ops->finish)
+		suspend_ops->finish();
+
  Done:
 	device_pm_unlock();
 
-- 
GitLab


From d9c6f546469f33f9aa48ae5991c33da8cd535b37 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 16 Apr 2009 22:57:46 +0200
Subject: [PATCH 0522/1421] drm: count reaches -1

With a postfix decrement in the test count will reach -1 rather than 0,
subsequent tests fail.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/via/via_dma.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/via/via_dma.c b/drivers/gpu/drm/via/via_dma.c
index 7a339dba6a6..bfb92d28326 100644
--- a/drivers/gpu/drm/via/via_dma.c
+++ b/drivers/gpu/drm/via/via_dma.c
@@ -481,11 +481,13 @@ static int via_wait_idle(drm_via_private_t * dev_priv)
 {
 	int count = 10000000;
 
-	while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--);
+	while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count)
+		;
 
-	while (count-- && (VIA_READ(VIA_REG_STATUS) &
+	while (count && (VIA_READ(VIA_REG_STATUS) &
 			   (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY |
-			    VIA_3D_ENG_BUSY))) ;
+			    VIA_3D_ENG_BUSY)))
+		--count;
 	return count;
 }
 
@@ -705,7 +707,7 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *
 	switch (d_siz->func) {
 	case VIA_CMDBUF_SPACE:
 		while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
-		       && count--) {
+		       && --count) {
 			if (!d_siz->wait) {
 				break;
 			}
@@ -717,7 +719,7 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *
 		break;
 	case VIA_CMDBUF_LAG:
 		while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
-		       && count--) {
+		       && --count) {
 			if (!d_siz->wait) {
 				break;
 			}
-- 
GitLab


From 77d26dc9b9805f322f5a1f6e559b18ad66205bd9 Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Thu, 16 Apr 2009 17:51:25 +0800
Subject: [PATCH 0523/1421] drm: clean dirty memory after device release

In current code we register/unregister connector object by
drm_sysfs_connector_add/remove function.

However under some cases, we need to dynamically register or unregister device
multiple times, so we have to go through register -> unregister ->register
routine.

Because after device_unregister function our memory is dirty, we need to do
clean operation in order to re-register the device, otherwise the system
will crash.  The patch intends to clean device after device release.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_sysfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index bc0c6849360..022876ae34f 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -132,6 +132,7 @@ void drm_sysfs_destroy(void)
  */
 static void drm_sysfs_device_release(struct device *dev)
 {
+	memset(dev, 0, sizeof(struct device));
 	return;
 }
 
-- 
GitLab


From 6b0084266c1d4917ad9259759a1e7bd623cb3888 Mon Sep 17 00:00:00 2001
From: Jonas Bonn <jonas@southpole.se>
Date: Thu, 16 Apr 2009 09:00:02 +0200
Subject: [PATCH 0524/1421] drm: set/clear is_master when master changed

The variable is_master is being used to track the drm_file that is currently
master, so its value needs to be updated accordingly when the master is
changed.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_stub.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index d009661781b..1b3e0ff57b4 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -159,6 +159,9 @@ void drm_master_put(struct drm_master **master)
 int drm_setmaster_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file_priv)
 {
+	if (file_priv->is_master)
+		return 0;
+
 	if (file_priv->minor->master && file_priv->minor->master != file_priv->master)
 		return -EINVAL;
 
@@ -169,6 +172,7 @@ int drm_setmaster_ioctl(struct drm_device *dev, void *data,
 	    file_priv->minor->master != file_priv->master) {
 		mutex_lock(&dev->struct_mutex);
 		file_priv->minor->master = drm_master_get(file_priv->master);
+		file_priv->is_master = 1;
 		mutex_unlock(&dev->struct_mutex);
 	}
 
@@ -178,10 +182,12 @@ int drm_setmaster_ioctl(struct drm_device *dev, void *data,
 int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv)
 {
-	if (!file_priv->master)
+	if (!file_priv->is_master)
 		return -EINVAL;
+
 	mutex_lock(&dev->struct_mutex);
 	drm_master_put(&file_priv->minor->master);
+	file_priv->is_master = 0;
 	mutex_unlock(&dev->struct_mutex);
 	return 0;
 }
-- 
GitLab


From 07f1c7a7f6736d9ec2eba57d209c5f48888d841e Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Mon, 20 Apr 2009 09:32:50 +1000
Subject: [PATCH 0525/1421] drm: check for minor master before allowing drop
 master.

When fast user switching a lot eventually we get to the point,
where we were checking for the wrong thing in this function.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_stub.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 1b3e0ff57b4..ef878615c49 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -185,6 +185,9 @@ int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
 	if (!file_priv->is_master)
 		return -EINVAL;
 
+	if (!file_priv->minor->master)
+		return -EINVAL;
+
 	mutex_lock(&dev->struct_mutex);
 	drm_master_put(&file_priv->minor->master);
 	file_priv->is_master = 0;
-- 
GitLab


From 59de2bebabc5027f93df999d59cc65df591c3e6e Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Mon, 20 Apr 2009 10:08:35 +1000
Subject: [PATCH 0526/1421] agp: zero pages before sending to userspace

AGP pages might be mapped into userspace finally, so the pages should be
set to zero before userspace can use it. Otherwise there is potential
information leakage.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/char/agp/generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 10d6cbd7c05..2224b762b7f 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -1226,7 +1226,7 @@ int agp_generic_alloc_pages(struct agp_bridge_data *bridge, struct agp_memory *m
 	int i, ret = -ENOMEM;
 
 	for (i = 0; i < num_pages; i++) {
-		page = alloc_page(GFP_KERNEL | GFP_DMA32);
+		page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
 		/* agp_free_memory() needs gart address */
 		if (page == NULL)
 			goto out;
@@ -1257,7 +1257,7 @@ void *agp_generic_alloc_page(struct agp_bridge_data *bridge)
 {
 	struct page * page;
 
-	page = alloc_page(GFP_KERNEL | GFP_DMA32);
+	page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
 	if (page == NULL)
 		return NULL;
 
-- 
GitLab


From 1f59390339f263c0fe7908fbe54466dbf3a64b58 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 20 Apr 2009 11:50:24 +1000
Subject: [PATCH 0527/1421] md: support bitmaps on RAID10 arrays larger then 2
 terabytes

.. and other arrays with components larger than 2 terabytes.

We use a "long" rather than a "sector_t" in part of the bitmap
size calculations, which is sad.

Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/bitmap.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index e4510c976b3..1fb91edc7de 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1590,7 +1590,7 @@ void bitmap_destroy(mddev_t *mddev)
 int bitmap_create(mddev_t *mddev)
 {
 	struct bitmap *bitmap;
-	unsigned long blocks = mddev->resync_max_sectors;
+	sector_t blocks = mddev->resync_max_sectors;
 	unsigned long chunks;
 	unsigned long pages;
 	struct file *file = mddev->bitmap_file;
@@ -1632,8 +1632,8 @@ int bitmap_create(mddev_t *mddev)
 	bitmap->chunkshift = ffz(~bitmap->chunksize);
 
 	/* now that chunksize and chunkshift are set, we can use these macros */
- 	chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) /
-			CHUNK_BLOCK_RATIO(bitmap);
+ 	chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+			CHUNK_BLOCK_SHIFT(bitmap);
  	pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
 
 	BUG_ON(!pages);
-- 
GitLab


From 093f13e23137b9e5f7629dd5932ceea1419e2b61 Mon Sep 17 00:00:00 2001
From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Date: Wed, 15 Apr 2009 10:37:33 -0700
Subject: [PATCH 0528/1421] x86, acpi_cpufreq: Fix the NULL pointer dereference
 in get_measured_perf

Fix for a regression that was introduced by earlier commit
18b2646fe3babeb40b34a0c1751e0bf5adfdc64c on Mon Apr 6 11:26:08 2009

Regression resulted in the below error happened on systems with
software coordination where per_cpu acpi data will not be initiated for
secondary CPUs in a P-state domain.

On Tue, 2009-04-14 at 23:01 -0700, Zhang, Yanmin wrote:
 My machine hanged with kernel 2.6.30-rc2 when script read
> /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor.
>
> opps happens in get_measured_perf:
>
>         cur.aperf.whole = readin.aperf.whole -
>                                 per_cpu(drv_data, cpu)->saved_aperf;
>
> Because per_cpu(drv_data, cpu)=NULL.
>
> So function get_measured_perf should check if (per_cpu(drv_data,
> cpu)==NULL)
> and return 0 if it's NULL.

--------------sys log------------------

BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
IP: [<ffffffff8021af75>] get_measured_perf+0x4a/0xf9
PGD a7dd88067 PUD a7ccf5067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
CPU 0
Modules linked in: video output
Pid: 2091, comm: kondemand/0 Not tainted 2.6.30-rc2 #1 MP Server
RIP: 0010:[<ffffffff8021af75>]  [<ffffffff8021af75>]
get_measured_perf+0x4a/0xf9
RSP: 0018:ffff880a7d56de20  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000046241a42b6 RCX: ffff88004d219000
RDX: 000000000000b660 RSI: 0000000000000020 RDI: 0000000000000001
RBP: ffff880a7f052000 R08: 00000046241a42b6 R09: ffffffff807639f0
R10: 00000000ffffffea R11: ffffffff802207f4 R12: ffff880a7f052000
R13: ffff88004d20e460 R14: 0000000000ddd5a6 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff88004d200000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 0000000a7f1bf000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kondemand/0 (pid: 2091, threadinfo ffff880a7d56c000, task
ffff880a7d4d18c0)
Stack:
 ffff880a7f052078 ffffffff803efd54 00000046241a42b6 000000462ffa9e95
 0000000000000001 0000000000000001 00000000ffffffea ffffffff8064f41a
 0000000000000012 0000000000000012 ffff880a7f052000 ffffffff80650547
Call Trace:
 [<ffffffff803efd54>] ? kobject_get+0x12/0x17
 [<ffffffff8064f41a>] ? __cpufreq_driver_getavg+0x42/0x57
 [<ffffffff80650547>] ? do_dbs_timer+0x147/0x272
 [<ffffffff80650400>] ? do_dbs_timer+0x0/0x272
 [<ffffffff802474ca>] ? worker_thread+0x15b/0x1f5
 [<ffffffff8024a02c>] ? autoremove_wake_function+0x0/0x2e
 [<ffffffff8024736f>] ? worker_thread+0x0/0x1f5
 [<ffffffff80249f0d>] ? kthread+0x54/0x83
 [<ffffffff8020c87a>] ? child_rip+0xa/0x20
 [<ffffffff80249eb9>] ? kthread+0x0/0x83
 [<ffffffff8020c870>] ? child_rip+0x0/0x20
Code: 99 a6 03 00 31 c9 85 c0 0f 85 c3 00 00 00 89 df 4c 8b 44 24 10 48
c7 c2 60 b6 00 00 48 8b 0c fd e0 30 a5 80 4c 89 c3 48 8b 04 0a <48> 2b
58 20 48 8b 44 24 18 48 89 1c 24 48 8b 34 0a 48 2b 46 28
RIP  [<ffffffff8021af75>] get_measured_perf+0x4a/0xf9
 RSP <ffff880a7d56de20>
CR2: 0000000000000020
---[ end trace 2b8fac9a49e19ad4 ]---

Tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ecdb682ab51..dd0bd76d14c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -68,11 +68,16 @@ struct acpi_cpufreq_data {
 	unsigned int max_freq;
 	unsigned int resume;
 	unsigned int cpu_feature;
-	u64 saved_aperf, saved_mperf;
 };
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
 
+struct acpi_msr_data {
+	u64 saved_aperf, saved_mperf;
+};
+
+static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+
 DEFINE_TRACE(power_mark);
 
 /* acpi_perf_data is a pointer to percpu data. */
@@ -287,11 +292,11 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 		return 0;
 
 	cur.aperf.whole = readin.aperf.whole -
-				per_cpu(drv_data, cpu)->saved_aperf;
+				per_cpu(msr_data, cpu).saved_aperf;
 	cur.mperf.whole = readin.mperf.whole -
-				per_cpu(drv_data, cpu)->saved_mperf;
-	per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
-	per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+				per_cpu(msr_data, cpu).saved_mperf;
+	per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
+	per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
 
 #ifdef __i386__
 	/*
-- 
GitLab


From e0e8c4e512e92bc25c19bd8d4926de17d2f8fbf2 Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Fri, 17 Apr 2009 16:22:06 +0200
Subject: [PATCH 0529/1421] acpi-cpufreq: Cleanup: Use printk_once

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index dd0bd76d14c..4eab747a896 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -693,13 +693,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
 	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
 	    policy->cpuinfo.transition_latency > 20 * 1000) {
-		static int print_once;
 		policy->cpuinfo.transition_latency = 20 * 1000;
-		if (!print_once) {
-			print_once = 1;
-			printk(KERN_INFO "Capping off P-state tranision latency"
-				" at 20 uS\n");
-		}
+			printk_once(KERN_INFO "Capping off P-state tranision"
+				    " latency at 20 uS\n");
 	}
 
 	data->max_freq = perf->states[0].core_frequency * 1000;
-- 
GitLab


From d91758f5ddb80e91176fa2cf80c88c1633950b3d Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Fri, 17 Apr 2009 16:22:07 +0200
Subject: [PATCH 0530/1421] acpi-cpufreq: style-only: add parens to math
 expression

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 4eab747a896..aec3161abed 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -340,7 +340,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 
 #endif
 
-	retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100;
+	retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100;
 
 	return retval;
 }
-- 
GitLab


From d876dfbbf5c8728102fb4f683450fa9ae3259cda Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Fri, 17 Apr 2009 16:22:08 +0200
Subject: [PATCH 0531/1421] acpi-cpufreq: Do not let get_measured perf depend
 on internal variable

Take already available policy->cpuinfo.max_freq and get rid of acpi-cpufreq
specific max_freq variable.

This implies that P0 is always the highest frequency which should always
be true as ACPI spec says:
As a result, the zeroth entry describes the highest performance state

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index aec3161abed..208ecf6643d 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -65,7 +65,6 @@ enum {
 struct acpi_cpufreq_data {
 	struct acpi_processor_performance *acpi_data;
 	struct cpufreq_frequency_table *freq_table;
-	unsigned int max_freq;
 	unsigned int resume;
 	unsigned int cpu_feature;
 };
@@ -340,7 +339,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 
 #endif
 
-	retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100;
+	retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
 
 	return retval;
 }
@@ -698,7 +697,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 				    " latency at 20 uS\n");
 	}
 
-	data->max_freq = perf->states[0].core_frequency * 1000;
 	/* table init */
 	for (i = 0; i < perf->state_count; i++) {
 		if (i > 0 && perf->states[i].core_frequency >=
@@ -717,6 +715,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (result)
 		goto err_freqfree;
 
+	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+		printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+
 	switch (perf->control_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
 		/* Current speed is unknown and not detectable by IO port */
-- 
GitLab


From 90af2cf6205bfc8def8c5a64c9134031d60b10fb Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Tue, 14 Apr 2009 11:02:18 +0800
Subject: [PATCH 0532/1421] ACPI video: fix an error when the brightness levels
 on AC and on Battery are same

when the brightness level on AC and brightness level on Battery
are same, the level_ac_battery is 1 in the current code,
which is wrong.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb7543a9..21968ae6ed9 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -770,10 +770,12 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	 * In this case, the first two elements in _BCL packages
 	 * are also supported brightness levels that OS should take care of.
 	 */
-	for (i = 2; i < count; i++)
-		if (br->levels[i] == br->levels[0] ||
-		    br->levels[i] == br->levels[1])
+	for (i = 2; i < count; i++) {
+		if (br->levels[i] == br->levels[0])
 			level_ac_battery++;
+		if (br->levels[i] == br->levels[1])
+			level_ac_battery++;
+	}
 
 	if (level_ac_battery < 2) {
 		level_ac_battery = 2 - level_ac_battery;
-- 
GitLab


From 52fcd11c0900b0cbc584eeda12a6e27dd6c9d046 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Mon, 20 Apr 2009 08:58:45 +0100
Subject: [PATCH 0533/1421] GFS2: Clear dirty bit at end of inode glock sync

The dirty bit can get set during the inode glock sync. Its too
complicated to change that at the moment, so this is the quick
fix - to clear the bit again at the end of the function.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/glops.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index bf23a62aa92..70f87f43afa 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -156,6 +156,12 @@ static void inode_go_sync(struct gfs2_glock *gl)
 	error = filemap_fdatawait(metamapping);
 	mapping_set_error(metamapping, error);
 	gfs2_ail_empty_gl(gl);
+	/*
+	 * Writeback of the data mapping may cause the dirty flag to be set
+	 * so we have to clear it again here.
+	 */
+	smp_mb__before_clear_bit();
+	clear_bit(GLF_DIRTY, &gl->gl_flags);
 }
 
 /**
-- 
GitLab


From 5d4af1be06affa2b42cdf59cd376752be1f934b3 Mon Sep 17 00:00:00 2001
From: Karsten Wiese <fzu@wemgehoertderstaat.de>
Date: Mon, 20 Apr 2009 13:01:21 +0200
Subject: [PATCH 0534/1421] ALSA: us122l: add snd_us122l_free()

Use it to clean up snd_us122l_card_used[].

Without patch unplugging of an US122L soundcard didn't reset the
corresponding element of snd_us122l_card_used[] to 0.
The (SNDRV_CARDS + 1)th plugging in did not result in creating the soundcard
device anymore.
Index values supplied with the modprobe command line were not used correctly
anymore after the first unplugging of an US122L.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/usx2y/us122l.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 98276aafefe..463f3ffe3fb 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -478,6 +478,14 @@ static bool us122l_create_card(struct snd_card *card)
 	return true;
 }
 
+static void snd_us122l_free(struct snd_card *card)
+{
+	struct us122l	*us122l = US122L(card);
+	int		index = us122l->chip.index;
+	if (index >= 0  &&  index < SNDRV_CARDS)
+		snd_us122l_card_used[index] = 0;
+}
+
 static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
 {
 	int		dev;
@@ -494,7 +502,7 @@ static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
 	if (err < 0)
 		return err;
 	snd_us122l_card_used[US122L(card)->chip.index = dev] = 1;
-
+	card->private_free = snd_us122l_free;
 	US122L(card)->chip.dev = device;
 	US122L(card)->chip.card = card;
 	mutex_init(&US122L(card)->mutex);
@@ -588,7 +596,7 @@ static void snd_us122l_disconnect(struct usb_interface *intf)
 	}
 
 	usb_put_intf(intf);
-	usb_put_dev(US122L(card)->chip.dev);
+	usb_put_dev(us122l->chip.dev);
 
 	while (atomic_read(&us122l->mmap_count))
 		msleep(500);
-- 
GitLab


From e3ba906ad17330e44fad5af42a423417249c6e09 Mon Sep 17 00:00:00 2001
From: Daniel T Chen <seven.steps@gmail.com>
Date: Mon, 20 Apr 2009 07:09:11 -0400
Subject: [PATCH 0535/1421] ALSA: Atiixp: Add SSID for mute_led quirk (unknown
 HP model)

Reference: Ubuntu #84973 (https://launchpad.net/bugs/84973)
Reference: Linux #8001 (http://bugzilla.kernel.org/show_bug.cgi?id=8001)

Make the mute LED function properly on this unknown HP model.

Signed-off-by: Daniel T Chen <seven.steps@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/atiixp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 9ce8548c03e..71515ddb459 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -1393,6 +1393,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 		.name = "HP nx6125",
 		.type = AC97_TUNE_MUTE_LED
 	},
+	{
+		.subvendor = 0x103c,
+		.subdevice = 0x3091,
+		.name = "unknown HP",
+		.type = AC97_TUNE_MUTE_LED
+	},
 	{ } /* terminator */
 };
 
-- 
GitLab


From eb8f3142fa30201426feb7b3f9046fcd730e17d3 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 18 Apr 2009 21:26:57 +0100
Subject: [PATCH 0536/1421] [ARM] 5456/1: add sys_preadv and sys_pwritev

Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs
but not ARM, resulting in

<stdin>:1421:2: warning: #warning syscall preadv not implemented
<stdin>:1425:2: warning: #warning syscall pwritev not implemented

This patch adds sys_preadv and sys_pwritev to ARM.

These syscalls simply take five long-sized parameters, so they
should have no calling-convention/ABI issues in the kernel.

Tested on armv5tel eabi using a preadv/pwritev test program posted
on linuxppc-dev earlier this month.

It would be nice to get this into the kernel before 2.6.30 final,
so that glibc's kernel version feature test for these syscalls
doesn't have to special-case ARM.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/unistd.h | 2 ++
 arch/arm/kernel/calls.S       | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 010618487cf..94cc58ef61a 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -387,6 +387,8 @@
 #define __NR_dup3			(__NR_SYSCALL_BASE+358)
 #define __NR_pipe2			(__NR_SYSCALL_BASE+359)
 #define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+#define __NR_preadv			(__NR_SYSCALL_BASE+361)
+#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9ca8d13f05f..1680e9e9c83 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -370,6 +370,8 @@
 		CALL(sys_dup3)
 		CALL(sys_pipe2)
 /* 360 */	CALL(sys_inotify_init1)
+		CALL(sys_preadv)
+		CALL(sys_pwritev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
-- 
GitLab


From 4a014a240b5a3c3b167702948a22dbe9e9a150a8 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Mon, 20 Apr 2009 03:33:09 +0100
Subject: [PATCH 0537/1421] [ARM] 5457/1: mach-imx gpio buildfix

From: David Brownell <dbrownell@users.sourceforge.net>

Fix GPIO-related build error on mach-imx platform:

  CC      drivers/spi/spi_gpio.o
In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/spi/spi_gpio.c:23:
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value':
arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2'
arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once
arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.)
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline':
arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment
arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment
	...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-imx/include/mach/gpio.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
index 502d5aa2c09..6c2942f8292 100644
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -1,6 +1,7 @@
 #ifndef _IMX_GPIO_H
 
 #include <linux/kernel.h>
+#include <mach/hardware.h>
 #include <mach/imx-regs.h>
 
 #define IMX_GPIO_ALLOC_MODE_NORMAL	0
-- 
GitLab


From e56985da455b9dc0591b8cb2006cc94b6f4fb0f4 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Mon, 20 Apr 2009 09:45:54 +0100
Subject: [PATCH 0538/1421] GFS2: Fix page_mkwrite() return code

This allows for the possibility of returning VM_FAULT_OOM as
well as VM_FAULT_SIGBUS. This ensures that the correct action
is taken.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/ops_file.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c
index 101caf3ee86..5d82e91887e 100644
--- a/fs/gfs2/ops_file.c
+++ b/fs/gfs2/ops_file.c
@@ -413,7 +413,9 @@ out_unlock:
 	gfs2_glock_dq(&gh);
 out:
 	gfs2_holder_uninit(&gh);
-	if (ret)
+	if (ret == -ENOMEM)
+		ret = VM_FAULT_OOM;
+	else if (ret)
 		ret = VM_FAULT_SIGBUS;
 	return ret;
 }
-- 
GitLab


From 8a577ffc75d9194fe8cdb7479236f2081c26ca1f Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Sat, 18 Apr 2009 15:05:45 -0700
Subject: [PATCH 0539/1421] driver: dont update dev_name via device_add path

notice one system /proc/iomem some entries missed the name for pci_devices

it turns that dev->dev.kobj name is changed after device_add.

for pci code: via acpi_pci_root_driver.ops.add (aka acpi_pci_root_add)
==> pci_acpi_scan_root is used to scan pci bus/device, and at the same
time we read the resource for pci_dev in the pci_read_bases, we have
res->name = pci_name(pci_dev); pci_name is calling dev_name.

later via acpi_pci_root_driver.ops.start (aka acpi_pci_root_start) ==>
pci_bus_add_device to add all pci_dev in kobj tree.  pci_bus_add_device
will call device_add.

actually in device_add

        /* first, register with generic layer. */
        error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
        if (error)
                goto Error;

will get one new name for that kobj, old name is freed.

[Impact: fix corrupted names in /proc/iomem ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/base/core.c | 3 ++-
 lib/kobject.c       | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index d230ff4b3ee..4aa527b8a91 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -891,7 +891,8 @@ int device_add(struct device *dev)
 		set_dev_node(dev, dev_to_node(parent));
 
 	/* first, register with generic layer. */
-	error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
+	/* we require the name to be set before, and pass NULL */
+	error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
 	if (error)
 		goto Error;
 
diff --git a/lib/kobject.c b/lib/kobject.c
index a6dec32f2dd..bacf6fe4f7a 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -218,6 +218,9 @@ int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
 	const char *old_name = kobj->name;
 	char *s;
 
+	if (kobj->name && !fmt)
+		return 0;
+
 	kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs);
 	if (!kobj->name)
 		return -ENOMEM;
-- 
GitLab


From f297bfee71df4f1cc5bacd4dea330e1241ba61ae Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 20 Apr 2009 12:46:24 +0100
Subject: [PATCH 0540/1421] FRV: Don't attempt to #include <linux/blk.h> as it
 doesn't exist

Stop the FRV arch from attempting to #include <linux/blk.h> as it doesn't
exist.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/setup.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index 0669e138238..55e4fab7c0b 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 
 #ifdef CONFIG_BLK_DEV_INITRD
-#include <linux/blk.h>
 #include <asm/pgtable.h>
 #endif
 
-- 
GitLab


From a5432f5ad43822802ba6f8ba8662ca6361712044 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 20 Apr 2009 15:46:45 +0100
Subject: [PATCH 0541/1421] FS-Cache: Add MAINTAINERS record for FS-Cache and
 CacheFiles

Add MAINTAINERS record for FS-Cache and CacheFiles.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 1e067a675e5..6baace38b24 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1287,6 +1287,14 @@ S:	Maintained
 F:	Documentation/video4linux/bttv/
 F:	drivers/media/video/bt8xx/bttv*
 
+CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-cachefs@redhat.com
+S:	Supported
+F:	Documentation/filesystems/caching/cachefiles.txt
+F:	fs/cachefiles/
+
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 P:	Jonathan Corbet
 M:	corbet@lwn.net
@@ -2325,6 +2333,15 @@ F:	Documentation/power/freezing-of-tasks.txt
 F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
+FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-cachefs@redhat.com
+S:	Supported
+F:	Documentation/filesystems/caching/
+F:	fs/fscache/
+F:	include/linux/fscache*.h
+
 FTRACE
 P:	Steven Rostedt
 M:	rostedt@goodmis.org
-- 
GitLab


From fc61e6636d13eb3a23eb29b4327eeee9de0ef3bc Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 20 Apr 2009 08:25:31 -0500
Subject: [PATCH 0542/1421] x86/uv: fix for no memory at paddr 0

Fix endcase where the memory at physical address 0 does not really
exist AND one of the sockets on blade 0 has no active cpus.

The memory that _appears_ to be at physical address 0 is actually
memory that located at a different address but has been remapped by
the chipset so that it appears to be at physical address 0.

When determining the UV pnode, the algorithm for determining the pnode
incorrectly used the relocated physical address instead of the actual
(global) address.

[ Impact: boot failure on partitioned systems ]

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090420132530.GA23156@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index d6712334ce4..2bda6935297 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -652,6 +652,7 @@ void __init uv_system_init(void)
 		if (uv_node_to_blade[nid] >= 0)
 			continue;
 		paddr = node_start_pfn(nid) << PAGE_SHIFT;
+		paddr = uv_soc_phys_ram_to_gpa(paddr);
 		pnode = (paddr >> m_val) & pnode_mask;
 		blade = boot_pnode_to_blade(pnode);
 		uv_node_to_blade[nid] = blade;
-- 
GitLab


From 05f0ecbda5c215279f8e0f852e1606f441a11236 Mon Sep 17 00:00:00 2001
From: Isaku Yamahata <yamahata@valinux.co.jp>
Date: Sat, 18 Apr 2009 12:15:23 +0900
Subject: [PATCH 0543/1421] [IA64] fix allmodconfig compilation breakage.

This patch fixes the following compilation error caused by recursive
inclusion of kernel.h which defines BUILD_BUG_ON().
In this case, the case it catches will be caught by the case
CONFIG_PARAVIRT=n, so removing it would not hurt compile time check
very much. So fix the breakage by removing it.

  CC      arch/ia64/kernel/asm-offsets.s
In file included from include/linux/bitops.h:17,
                 from include/linux/kernel.h:15,
                 from include/linux/sched.h:52,
                 from arch/ia64/kernel/asm-offsets.c:9:
arch/ia64/include/asm/bitops.h: In function 'set_bit':
arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON'

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/paravirt_privop.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 3d2951130b5..8f6cb11c9fa 100644
--- a/arch/ia64/include/asm/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -445,7 +445,6 @@ paravirt_set_rr0_to_rr4(unsigned long val0, unsigned long val1,
 		register unsigned long ia64_intri_res asm ("r8");	\
 		register unsigned long __reg asm ("r8") = (reg);	\
 									\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));		\
 		asm volatile (paravirt_alt_bundle(__PARAVIRT_BR,	\
 						  PARAVIRT_TYPE(GETREG) \
 						  + (reg))		\
@@ -464,7 +463,6 @@ paravirt_set_rr0_to_rr4(unsigned long val0, unsigned long val1,
 		register unsigned long ia64_clobber1 asm ("r8");	\
 		register unsigned long ia64_clobber2 asm ("r9");	\
 									\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));		\
 		asm volatile (paravirt_alt_bundle(__PARAVIRT_BR,	\
 						  PARAVIRT_TYPE(SETREG) \
 						  + (reg))		\
-- 
GitLab


From 8db70d3deee33e661d091b3e317fccc87bf0975d Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Mon, 20 Apr 2009 11:33:12 -0600
Subject: [PATCH 0544/1421] powerpc/5200: defconfig updates

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/configs/52xx/cm5200_defconfig    |  69 +++++--
 arch/powerpc/configs/52xx/lite5200b_defconfig |  74 +++++--
 arch/powerpc/configs/52xx/motionpro_defconfig |  77 +++++--
 arch/powerpc/configs/52xx/pcm030_defconfig    |  69 +++++--
 arch/powerpc/configs/52xx/tqm5200_defconfig   |  76 +++++--
 arch/powerpc/configs/mpc5200_defconfig        | 188 +++++++++++++++---
 6 files changed, 428 insertions(+), 125 deletions(-)

diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 1239c6132b4..3838b77b811 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -232,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,7 +286,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -440,7 +450,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -505,10 +514,12 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +548,8 @@ CONFIG_LXT_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -555,7 +568,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,7 +669,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -786,11 +797,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -831,7 +842,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -846,6 +856,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -853,6 +864,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -863,6 +875,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -884,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -941,6 +959,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -953,7 +972,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1024,6 +1042,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1039,11 +1058,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1061,6 +1081,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1089,9 +1112,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1099,17 +1125,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1140,10 +1168,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1211,6 +1241,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index b7b88056290..29b0f34488f 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:14 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -95,19 +97,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -117,10 +122,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -128,6 +135,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -140,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -161,8 +168,6 @@ CONFIG_FREEZER=y
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -170,6 +175,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -180,6 +186,8 @@ CONFIG_PPC_LITE5200=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -241,9 +249,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +283,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +306,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -412,6 +423,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -477,9 +489,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -502,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -578,6 +593,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -611,6 +627,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -632,6 +650,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -642,10 +661,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -655,6 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -664,6 +684,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -671,7 +692,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -795,7 +815,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -876,7 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -892,6 +911,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -902,6 +922,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -923,6 +944,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -966,6 +992,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -978,7 +1005,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -994,6 +1020,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1007,11 +1034,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1029,6 +1058,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1057,9 +1089,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1067,17 +1102,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1108,10 +1145,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1180,6 +1219,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index fb10f22fd0d..07b6b266ea9 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:29 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -233,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,7 +287,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -441,7 +451,6 @@ CONFIG_MTD_ROM=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -466,6 +475,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -516,8 +526,10 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -528,6 +540,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -556,6 +569,8 @@ CONFIG_ICPLUS_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -574,7 +589,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -665,7 +679,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -696,6 +709,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -710,11 +724,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -800,7 +817,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -810,6 +829,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -866,8 +889,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -878,6 +902,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -899,6 +924,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -956,6 +986,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -968,7 +999,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1039,6 +1069,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1054,11 +1085,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1076,6 +1108,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1104,9 +1139,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1114,17 +1152,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1155,10 +1195,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1226,6 +1268,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 00944c09a0a..afb1a3d1ef0 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +71,7 @@ CONFIG_LOCALVERSION="trunk"
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -97,18 +100,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -117,10 +120,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,6 +134,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -141,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,8 +167,6 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -171,6 +174,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -181,6 +185,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -242,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -290,7 +300,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -340,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -352,7 +362,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -451,7 +460,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -504,6 +512,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -580,6 +589,7 @@ CONFIG_PATA_MPC52xx=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -613,6 +623,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -636,7 +648,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -702,6 +713,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -767,7 +779,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -889,11 +900,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -934,7 +945,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -949,6 +959,7 @@ CONFIG_USB_STORAGE=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1007,8 +1018,9 @@ CONFIG_RTC_DRV_PCF8563=m
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1019,6 +1031,7 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1039,6 +1052,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1096,6 +1114,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1107,7 +1126,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1162,6 +1180,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1177,11 +1196,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1200,13 +1219,25 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 65237ad6f07..8585c7c1286 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:57 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -138,7 +146,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,8 +166,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -168,6 +173,7 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -178,6 +184,8 @@ CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -238,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,7 +292,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -514,8 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -527,6 +538,7 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -555,6 +567,8 @@ CONFIG_LXT_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -573,7 +587,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -675,7 +688,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -706,6 +718,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -720,11 +733,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -857,11 +873,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -902,7 +918,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -917,6 +932,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -976,8 +992,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -988,6 +1005,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1009,6 +1027,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1066,6 +1089,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1078,7 +1102,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1149,6 +1172,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1164,11 +1188,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1186,6 +1211,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1214,9 +1242,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1224,17 +1255,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1265,10 +1298,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1337,6 +1372,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index af0cd55605d..aaa4416660e 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Feb  6 09:48:53 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon Apr 20 11:06:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -39,6 +40,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -55,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -91,19 +94,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,10 +119,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,6 +132,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -136,7 +145,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,8 +165,6 @@ CONFIG_FREEZER=y
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -166,8 +172,9 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_EFIKA=y
 CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MEDIA5200=y
 CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
+CONFIG_PPC_MPC5200_GPIO=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -176,7 +183,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -241,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +307,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -388,12 +400,9 @@ CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -447,6 +456,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -465,14 +476,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -500,12 +520,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
 # EEPROM support
 #
 CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
@@ -564,9 +586,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -589,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -666,6 +691,7 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -699,6 +725,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -722,7 +751,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -802,6 +830,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -854,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -883,22 +913,63 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MPC52xx_PSC=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -915,10 +986,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -929,11 +1002,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -952,6 +1030,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -989,6 +1068,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -1084,9 +1164,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_GENERIC=y
@@ -1127,15 +1211,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 # CONFIG_HID_APPLE is not set
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 # CONFIG_HID_CHICONY is not set
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
@@ -1204,11 +1290,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1250,7 +1336,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1265,6 +1350,8 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1317,6 +1404,13 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1336,8 +1430,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1348,6 +1443,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1369,6 +1465,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1416,6 +1517,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1426,6 +1533,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1438,7 +1546,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1493,6 +1600,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1500,7 +1608,7 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1508,11 +1616,14 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1530,6 +1641,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1558,9 +1672,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1568,17 +1685,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1609,10 +1728,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1680,8 +1801,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
 
 #
 # Random Number Generation
-- 
GitLab


From 6d25b688ecc488753af3c9e6f6a9a575b863cf37 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Mon, 20 Apr 2009 12:18:43 -0600
Subject: [PATCH 0545/1421] powerpc: Fix of_node_put() exit path in
 of_irq_map_one()

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/kernel/prom_parse.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 8f0856f312d..8362620c9e6 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -971,7 +971,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 	struct device_node *p;
 	const u32 *intspec, *tmp, *addr;
 	u32 intsize, intlen;
-	int res;
+	int res = -EINVAL;
 
 	DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
 
@@ -995,21 +995,20 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 
 	/* Get size of interrupt specifier */
 	tmp = of_get_property(p, "#interrupt-cells", NULL);
-	if (tmp == NULL) {
-		of_node_put(p);
-		return -EINVAL;
-	}
+	if (tmp == NULL)
+		goto out;
 	intsize = *tmp;
 
 	DBG(" intsize=%d intlen=%d\n", intsize, intlen);
 
 	/* Check index */
 	if ((index + 1) * intsize > intlen)
-		return -EINVAL;
+		goto out;
 
 	/* Get new specifier and map it */
 	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
 			     addr, out_irq);
+out:
 	of_node_put(p);
 	return res;
 }
-- 
GitLab


From ff6945279d45edd8f6b0a5ddb1ef16cecce3ea9c Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Mon, 20 Apr 2009 19:45:13 +0000
Subject: [PATCH 0546/1421] [CIFS] Make cifs_unlink consistent in checks for
 null inode

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES  |  6 ++++++
 fs/cifs/cifsfs.h |  2 +-
 fs/cifs/inode.c  | 21 +++++++++++++++------
 3 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 9d1fb6ec8a5..1bf81813627 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,9 @@
+Version 1.58
+------------
+Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
+when the UTF-8 string is composed of unusually long (more than 4 byte) converted
+characters.
+ 
 Version 1.57
 ------------
 Improve support for multiple security contexts to the same server. We
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 77e190dc288..051b71cfdea 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -100,5 +100,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.57"
+#define CIFS_VERSION   "1.58"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f36b4e40e44..9c869a6dcba 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -962,13 +962,21 @@ undo_setattr:
 	goto out_close;
 }
 
+
+/*
+ * If dentry->d_inode is null (usually meaning the cached dentry
+ * is a negative dentry) then we would attempt a standard SMB delete, but
+ * if that fails we can not attempt the fall back mechanisms on EACESS
+ * but will return the EACESS to the caller.  Note that the VFS does not call
+ * unlink on negative dentries currently.
+ */
 int cifs_unlink(struct inode *dir, struct dentry *dentry)
 {
 	int rc = 0;
 	int xid;
 	char *full_path = NULL;
 	struct inode *inode = dentry->d_inode;
-	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifsInodeInfo *cifs_inode;
 	struct super_block *sb = dir->i_sb;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
@@ -1012,7 +1020,7 @@ psx_del_no_retry:
 		rc = cifs_rename_pending_delete(full_path, dentry, xid);
 		if (rc == 0)
 			drop_nlink(inode);
-	} else if (rc == -EACCES && dosattr == 0) {
+	} else if ((rc == -EACCES) && (dosattr == 0) && inode) {
 		attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
 		if (attrs == NULL) {
 			rc = -ENOMEM;
@@ -1020,7 +1028,8 @@ psx_del_no_retry:
 		}
 
 		/* try to reset dos attributes */
-		origattr = cifsInode->cifsAttrs;
+		cifs_inode = CIFS_I(inode);
+		origattr = cifs_inode->cifsAttrs;
 		if (origattr == 0)
 			origattr |= ATTR_NORMAL;
 		dosattr = origattr & ~ATTR_READONLY;
@@ -1041,13 +1050,13 @@ psx_del_no_retry:
 
 out_reval:
 	if (inode) {
-		cifsInode = CIFS_I(inode);
-		cifsInode->time = 0;	/* will force revalidate to get info
+		cifs_inode = CIFS_I(inode);
+		cifs_inode->time = 0;	/* will force revalidate to get info
 					   when needed */
 		inode->i_ctime = current_fs_time(sb);
 	}
 	dir->i_ctime = dir->i_mtime = current_fs_time(sb);
-	cifsInode = CIFS_I(dir);
+	cifs_inode = CIFS_I(dir);
 	CIFS_I(dir)->time = 0;	/* force revalidate of dir as well */
 
 	kfree(full_path);
-- 
GitLab


From ffbd517d5a8c8e93ddd11046434fb029f3df73aa Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Apr 2009 15:50:09 -0400
Subject: [PATCH 0547/1421] Btrfs: use WRITE_SYNC for synchronous writes

Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for
writes we plan on waiting on in the near future.  This patch
mirrors recent changes in other filesystems and the generic code to
use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for
other latency critical writes.

Btrfs uses async worker threads for checksumming before the write is done,
and then again to actually submit the bios.  The bio submission code just
runs a per-device list of bios that need to be sent down the pipe.

This list is split into low priority and high priority lists so the
WRITE_SYNC IO happens first.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c      |   4 +-
 fs/btrfs/extent_io.c    |  44 +++++++++-----
 fs/btrfs/ordered-data.c |   2 +-
 fs/btrfs/volumes.c      | 124 +++++++++++++++++++++++++++++++---------
 fs/btrfs/volumes.h      |  13 ++++-
 5 files changed, 141 insertions(+), 46 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 92caa8035f3..fec18b43c2c 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2095,10 +2095,10 @@ static int write_dev_supers(struct btrfs_device *device,
 				device->barriers = 0;
 				get_bh(bh);
 				lock_buffer(bh);
-				ret = submit_bh(WRITE, bh);
+				ret = submit_bh(WRITE_SYNC, bh);
 			}
 		} else {
-			ret = submit_bh(WRITE, bh);
+			ret = submit_bh(WRITE_SYNC, bh);
 		}
 
 		if (!ret && wait) {
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index eb2bee8b7fb..483b6727aaa 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -50,7 +50,10 @@ struct extent_page_data {
 	/* tells writepage not to lock the state bits for this range
 	 * it still does the unlocking
 	 */
-	int extent_locked;
+	unsigned int extent_locked:1;
+
+	/* tells the submit_bio code to use a WRITE_SYNC */
+	unsigned int sync_io:1;
 };
 
 int __init extent_io_init(void)
@@ -2136,8 +2139,14 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 	u64 delalloc_end;
 	int page_started;
 	int compressed;
+	int write_flags;
 	unsigned long nr_written = 0;
 
+	if (wbc->sync_mode == WB_SYNC_ALL)
+		write_flags = WRITE_SYNC_PLUG;
+	else
+		write_flags = WRITE;
+
 	WARN_ON(!PageLocked(page));
 	pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
 	if (page->index > end_index ||
@@ -2314,9 +2323,9 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 				       (unsigned long long)end);
 			}
 
-			ret = submit_extent_page(WRITE, tree, page, sector,
-						 iosize, pg_offset, bdev,
-						 &epd->bio, max_nr,
+			ret = submit_extent_page(write_flags, tree, page,
+						 sector, iosize, pg_offset,
+						 bdev, &epd->bio, max_nr,
 						 end_bio_extent_writepage,
 						 0, 0, 0);
 			if (ret)
@@ -2460,15 +2469,23 @@ retry:
 	return ret;
 }
 
-static noinline void flush_write_bio(void *data)
+static void flush_epd_write_bio(struct extent_page_data *epd)
 {
-	struct extent_page_data *epd = data;
 	if (epd->bio) {
-		submit_one_bio(WRITE, epd->bio, 0, 0);
+		if (epd->sync_io)
+			submit_one_bio(WRITE_SYNC, epd->bio, 0, 0);
+		else
+			submit_one_bio(WRITE, epd->bio, 0, 0);
 		epd->bio = NULL;
 	}
 }
 
+static noinline void flush_write_bio(void *data)
+{
+	struct extent_page_data *epd = data;
+	flush_epd_write_bio(epd);
+}
+
 int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
 			  get_extent_t *get_extent,
 			  struct writeback_control *wbc)
@@ -2480,6 +2497,7 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
 		.tree = tree,
 		.get_extent = get_extent,
 		.extent_locked = 0,
+		.sync_io = wbc->sync_mode == WB_SYNC_ALL,
 	};
 	struct writeback_control wbc_writepages = {
 		.bdi		= wbc->bdi,
@@ -2490,13 +2508,11 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
 		.range_end	= (loff_t)-1,
 	};
 
-
 	ret = __extent_writepage(page, wbc, &epd);
 
 	extent_write_cache_pages(tree, mapping, &wbc_writepages,
 				 __extent_writepage, &epd, flush_write_bio);
-	if (epd.bio)
-		submit_one_bio(WRITE, epd.bio, 0, 0);
+	flush_epd_write_bio(&epd);
 	return ret;
 }
 
@@ -2515,6 +2531,7 @@ int extent_write_locked_range(struct extent_io_tree *tree, struct inode *inode,
 		.tree = tree,
 		.get_extent = get_extent,
 		.extent_locked = 1,
+		.sync_io = mode == WB_SYNC_ALL,
 	};
 	struct writeback_control wbc_writepages = {
 		.bdi		= inode->i_mapping->backing_dev_info,
@@ -2540,8 +2557,7 @@ int extent_write_locked_range(struct extent_io_tree *tree, struct inode *inode,
 		start += PAGE_CACHE_SIZE;
 	}
 
-	if (epd.bio)
-		submit_one_bio(WRITE, epd.bio, 0, 0);
+	flush_epd_write_bio(&epd);
 	return ret;
 }
 
@@ -2556,13 +2572,13 @@ int extent_writepages(struct extent_io_tree *tree,
 		.tree = tree,
 		.get_extent = get_extent,
 		.extent_locked = 0,
+		.sync_io = wbc->sync_mode == WB_SYNC_ALL,
 	};
 
 	ret = extent_write_cache_pages(tree, mapping, wbc,
 				       __extent_writepage, &epd,
 				       flush_write_bio);
-	if (epd.bio)
-		submit_one_bio(WRITE, epd.bio, 0, 0);
+	flush_epd_write_bio(&epd);
 	return ret;
 }
 
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 53c87b197d7..d6f0806c682 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -489,7 +489,7 @@ again:
 	/* start IO across the range first to instantiate any delalloc
 	 * extents
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_NONE);
+	btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
 
 	/* The compression code will leave pages locked but return from
 	 * writepage without setting the page writeback.  Starting again
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index e0913e46972..e53835b8859 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -125,6 +125,20 @@ static noinline struct btrfs_fs_devices *find_fsid(u8 *fsid)
 	return NULL;
 }
 
+static void requeue_list(struct btrfs_pending_bios *pending_bios,
+			struct bio *head, struct bio *tail)
+{
+
+	struct bio *old_head;
+
+	old_head = pending_bios->head;
+	pending_bios->head = head;
+	if (pending_bios->tail)
+		tail->bi_next = old_head;
+	else
+		pending_bios->tail = tail;
+}
+
 /*
  * we try to collect pending bios for a device so we don't get a large
  * number of procs sending bios down to the same device.  This greatly
@@ -141,10 +155,12 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 	struct bio *pending;
 	struct backing_dev_info *bdi;
 	struct btrfs_fs_info *fs_info;
+	struct btrfs_pending_bios *pending_bios;
 	struct bio *tail;
 	struct bio *cur;
 	int again = 0;
-	unsigned long num_run = 0;
+	unsigned long num_run;
+	unsigned long num_sync_run;
 	unsigned long limit;
 	unsigned long last_waited = 0;
 
@@ -153,20 +169,30 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 	limit = btrfs_async_submit_limit(fs_info);
 	limit = limit * 2 / 3;
 
+	/* we want to make sure that every time we switch from the sync
+	 * list to the normal list, we unplug
+	 */
+	num_sync_run = 0;
+
 loop:
 	spin_lock(&device->io_lock);
+	num_run = 0;
 
 loop_lock:
+
 	/* take all the bios off the list at once and process them
 	 * later on (without the lock held).  But, remember the
 	 * tail and other pointers so the bios can be properly reinserted
 	 * into the list if we hit congestion
 	 */
-	pending = device->pending_bios;
-	tail = device->pending_bio_tail;
+	if (device->pending_sync_bios.head)
+		pending_bios = &device->pending_sync_bios;
+	else
+		pending_bios = &device->pending_bios;
+
+	pending = pending_bios->head;
+	tail = pending_bios->tail;
 	WARN_ON(pending && !tail);
-	device->pending_bios = NULL;
-	device->pending_bio_tail = NULL;
 
 	/*
 	 * if pending was null this time around, no bios need processing
@@ -176,16 +202,41 @@ loop_lock:
 	 * device->running_pending is used to synchronize with the
 	 * schedule_bio code.
 	 */
-	if (pending) {
-		again = 1;
-		device->running_pending = 1;
-	} else {
+	if (device->pending_sync_bios.head == NULL &&
+	    device->pending_bios.head == NULL) {
 		again = 0;
 		device->running_pending = 0;
+	} else {
+		again = 1;
+		device->running_pending = 1;
 	}
+
+	pending_bios->head = NULL;
+	pending_bios->tail = NULL;
+
 	spin_unlock(&device->io_lock);
 
+	/*
+	 * if we're doing the regular priority list, make sure we unplug
+	 * for any high prio bios we've sent down
+	 */
+	if (pending_bios == &device->pending_bios && num_sync_run > 0) {
+		num_sync_run = 0;
+		blk_run_backing_dev(bdi, NULL);
+	}
+
 	while (pending) {
+
+		rmb();
+		if (pending_bios != &device->pending_sync_bios &&
+		    device->pending_sync_bios.head &&
+		    num_run > 16) {
+			cond_resched();
+			spin_lock(&device->io_lock);
+			requeue_list(pending_bios, pending, tail);
+			goto loop_lock;
+		}
+
 		cur = pending;
 		pending = pending->bi_next;
 		cur->bi_next = NULL;
@@ -196,10 +247,18 @@ loop_lock:
 			wake_up(&fs_info->async_submit_wait);
 
 		BUG_ON(atomic_read(&cur->bi_cnt) == 0);
-		bio_get(cur);
 		submit_bio(cur->bi_rw, cur);
-		bio_put(cur);
 		num_run++;
+		if (bio_sync(cur))
+			num_sync_run++;
+
+		if (need_resched()) {
+			if (num_sync_run) {
+				blk_run_backing_dev(bdi, NULL);
+				num_sync_run = 0;
+			}
+			cond_resched();
+		}
 
 		/*
 		 * we made progress, there is more work to do and the bdi
@@ -208,7 +267,6 @@ loop_lock:
 		 */
 		if (pending && bdi_write_congested(bdi) && num_run > 16 &&
 		    fs_info->fs_devices->open_devices > 1) {
-			struct bio *old_head;
 			struct io_context *ioc;
 
 			ioc = current->io_context;
@@ -233,17 +291,17 @@ loop_lock:
 				 * against it before looping
 				 */
 				last_waited = ioc->last_waited;
+				if (need_resched()) {
+					if (num_sync_run) {
+						blk_run_backing_dev(bdi, NULL);
+						num_sync_run = 0;
+					}
+					cond_resched();
+				}
 				continue;
 			}
 			spin_lock(&device->io_lock);
-
-			old_head = device->pending_bios;
-			device->pending_bios = pending;
-			if (device->pending_bio_tail)
-				tail->bi_next = old_head;
-			else
-				device->pending_bio_tail = tail;
-
+			requeue_list(pending_bios, pending, tail);
 			device->running_pending = 1;
 
 			spin_unlock(&device->io_lock);
@@ -251,11 +309,18 @@ loop_lock:
 			goto done;
 		}
 	}
+
+	if (num_sync_run) {
+		num_sync_run = 0;
+		blk_run_backing_dev(bdi, NULL);
+	}
+
+	cond_resched();
 	if (again)
 		goto loop;
 
 	spin_lock(&device->io_lock);
-	if (device->pending_bios)
+	if (device->pending_bios.head || device->pending_sync_bios.head)
 		goto loop_lock;
 	spin_unlock(&device->io_lock);
 
@@ -2497,7 +2562,7 @@ again:
 			max_errors = 1;
 		}
 	}
-	if (multi_ret && rw == WRITE &&
+	if (multi_ret && (rw & (1 << BIO_RW)) &&
 	    stripes_allocated < stripes_required) {
 		stripes_allocated = map->num_stripes;
 		free_extent_map(em);
@@ -2762,6 +2827,7 @@ static noinline int schedule_bio(struct btrfs_root *root,
 				 int rw, struct bio *bio)
 {
 	int should_queue = 1;
+	struct btrfs_pending_bios *pending_bios;
 
 	/* don't bother with additional async steps for reads, right now */
 	if (!(rw & (1 << BIO_RW))) {
@@ -2783,13 +2849,17 @@ static noinline int schedule_bio(struct btrfs_root *root,
 	bio->bi_rw |= rw;
 
 	spin_lock(&device->io_lock);
+	if (bio_sync(bio))
+		pending_bios = &device->pending_sync_bios;
+	else
+		pending_bios = &device->pending_bios;
 
-	if (device->pending_bio_tail)
-		device->pending_bio_tail->bi_next = bio;
+	if (pending_bios->tail)
+		pending_bios->tail->bi_next = bio;
 
-	device->pending_bio_tail = bio;
-	if (!device->pending_bios)
-		device->pending_bios = bio;
+	pending_bios->tail = bio;
+	if (!pending_bios->head)
+		pending_bios->head = bio;
 	if (device->running_pending)
 		should_queue = 0;
 
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 2185de72ff7..5836327ba5d 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -23,13 +23,22 @@
 #include "async-thread.h"
 
 struct buffer_head;
+struct btrfs_pending_bios {
+	struct bio *head;
+	struct bio *tail;
+};
+
 struct btrfs_device {
 	struct list_head dev_list;
 	struct list_head dev_alloc_list;
 	struct btrfs_fs_devices *fs_devices;
 	struct btrfs_root *dev_root;
-	struct bio *pending_bios;
-	struct bio *pending_bio_tail;
+
+	/* regular prio bios */
+	struct btrfs_pending_bios pending_bios;
+	/* WRITE_SYNC bios */
+	struct btrfs_pending_bios pending_sync_bios;
+
 	int running_pending;
 	u64 generation;
 
-- 
GitLab


From d313d7a31a752c88f7288692bd98e66d0789779b Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Apr 2009 15:50:09 -0400
Subject: [PATCH 0548/1421] Btrfs: add a priority queue to the async thread
 helpers

Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a
higher priority.  But, the checksumming helper threads prevent it
from being fully effective.

There are two problems.  First, a big queue of pending checksumming
will delay the synchronous IO behind other lower priority writes.  Second,
the checksumming uses an ordered async work queue.  The ordering makes sure
that IOs are sent to the block layer in the same order they are sent
to the checksumming threads.  Usually this gives us less seeky IO.

But, when we start mixing IO priorities, the lower priority IO can delay
the higher priority IO.

This patch solves both problems by adding a high priority list to the async
helper threads, and a new btrfs_set_work_high_prio(), which is used
to make put a new async work item onto the higher priority list.

The ordering is still done on high priority IO, but all of the high
priority bios are ordered separately from the low priority bios.  This
ordering is purely an IO optimization, it is not involved in data
or metadata integrity.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/async-thread.c | 60 ++++++++++++++++++++++++++++++++---------
 fs/btrfs/async-thread.h |  2 ++
 fs/btrfs/disk-io.c      |  5 ++++
 fs/btrfs/extent_io.c    |  2 +-
 fs/btrfs/file.c         |  2 +-
 5 files changed, 56 insertions(+), 15 deletions(-)

diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 51bfdfc8fcd..502c3d61de6 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -25,6 +25,7 @@
 #define WORK_QUEUED_BIT 0
 #define WORK_DONE_BIT 1
 #define WORK_ORDER_DONE_BIT 2
+#define WORK_HIGH_PRIO_BIT 3
 
 /*
  * container for the kthread task pointer and the list of pending work
@@ -36,6 +37,7 @@ struct btrfs_worker_thread {
 
 	/* list of struct btrfs_work that are waiting for service */
 	struct list_head pending;
+	struct list_head prio_pending;
 
 	/* list of worker threads from struct btrfs_workers */
 	struct list_head worker_list;
@@ -103,10 +105,16 @@ static noinline int run_ordered_completions(struct btrfs_workers *workers,
 
 	spin_lock_irqsave(&workers->lock, flags);
 
-	while (!list_empty(&workers->order_list)) {
-		work = list_entry(workers->order_list.next,
-				  struct btrfs_work, order_list);
-
+	while (1) {
+		if (!list_empty(&workers->prio_order_list)) {
+			work = list_entry(workers->prio_order_list.next,
+					  struct btrfs_work, order_list);
+		} else if (!list_empty(&workers->order_list)) {
+			work = list_entry(workers->order_list.next,
+					  struct btrfs_work, order_list);
+		} else {
+			break;
+		}
 		if (!test_bit(WORK_DONE_BIT, &work->flags))
 			break;
 
@@ -143,8 +151,14 @@ static int worker_loop(void *arg)
 	do {
 		spin_lock_irq(&worker->lock);
 again_locked:
-		while (!list_empty(&worker->pending)) {
-			cur = worker->pending.next;
+		while (1) {
+			if (!list_empty(&worker->prio_pending))
+				cur = worker->prio_pending.next;
+			else if (!list_empty(&worker->pending))
+				cur = worker->pending.next;
+			else
+				break;
+
 			work = list_entry(cur, struct btrfs_work, list);
 			list_del(&work->list);
 			clear_bit(WORK_QUEUED_BIT, &work->flags);
@@ -163,7 +177,6 @@ again_locked:
 
 			spin_lock_irq(&worker->lock);
 			check_idle_worker(worker);
-
 		}
 		if (freezing(current)) {
 			worker->working = 0;
@@ -178,7 +191,8 @@ again_locked:
 				 * jump_in?
 				 */
 				smp_mb();
-				if (!list_empty(&worker->pending))
+				if (!list_empty(&worker->pending) ||
+				    !list_empty(&worker->prio_pending))
 					continue;
 
 				/*
@@ -191,7 +205,8 @@ again_locked:
 				 */
 				schedule_timeout(1);
 				smp_mb();
-				if (!list_empty(&worker->pending))
+				if (!list_empty(&worker->pending) ||
+				    !list_empty(&worker->prio_pending))
 					continue;
 
 				if (kthread_should_stop())
@@ -200,7 +215,8 @@ again_locked:
 				/* still no more work?, sleep for real */
 				spin_lock_irq(&worker->lock);
 				set_current_state(TASK_INTERRUPTIBLE);
-				if (!list_empty(&worker->pending))
+				if (!list_empty(&worker->pending) ||
+				    !list_empty(&worker->prio_pending))
 					goto again_locked;
 
 				/*
@@ -248,6 +264,7 @@ void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max)
 	INIT_LIST_HEAD(&workers->worker_list);
 	INIT_LIST_HEAD(&workers->idle_list);
 	INIT_LIST_HEAD(&workers->order_list);
+	INIT_LIST_HEAD(&workers->prio_order_list);
 	spin_lock_init(&workers->lock);
 	workers->max_workers = max;
 	workers->idle_thresh = 32;
@@ -273,6 +290,7 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
 		}
 
 		INIT_LIST_HEAD(&worker->pending);
+		INIT_LIST_HEAD(&worker->prio_pending);
 		INIT_LIST_HEAD(&worker->worker_list);
 		spin_lock_init(&worker->lock);
 		atomic_set(&worker->num_pending, 0);
@@ -396,7 +414,10 @@ int btrfs_requeue_work(struct btrfs_work *work)
 		goto out;
 
 	spin_lock_irqsave(&worker->lock, flags);
-	list_add_tail(&work->list, &worker->pending);
+	if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+		list_add_tail(&work->list, &worker->prio_pending);
+	else
+		list_add_tail(&work->list, &worker->pending);
 	atomic_inc(&worker->num_pending);
 
 	/* by definition we're busy, take ourselves off the idle
@@ -422,6 +443,11 @@ out:
 	return 0;
 }
 
+void btrfs_set_work_high_prio(struct btrfs_work *work)
+{
+	set_bit(WORK_HIGH_PRIO_BIT, &work->flags);
+}
+
 /*
  * places a struct btrfs_work into the pending queue of one of the kthreads
  */
@@ -438,7 +464,12 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work)
 	worker = find_worker(workers);
 	if (workers->ordered) {
 		spin_lock_irqsave(&workers->lock, flags);
-		list_add_tail(&work->order_list, &workers->order_list);
+		if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) {
+			list_add_tail(&work->order_list,
+				      &workers->prio_order_list);
+		} else {
+			list_add_tail(&work->order_list, &workers->order_list);
+		}
 		spin_unlock_irqrestore(&workers->lock, flags);
 	} else {
 		INIT_LIST_HEAD(&work->order_list);
@@ -446,7 +477,10 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work)
 
 	spin_lock_irqsave(&worker->lock, flags);
 
-	list_add_tail(&work->list, &worker->pending);
+	if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+		list_add_tail(&work->list, &worker->prio_pending);
+	else
+		list_add_tail(&work->list, &worker->pending);
 	atomic_inc(&worker->num_pending);
 	check_busy_worker(worker);
 
diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h
index 31be4ed8b63..1b511c109db 100644
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -85,6 +85,7 @@ struct btrfs_workers {
 	 * of work items waiting for completion
 	 */
 	struct list_head order_list;
+	struct list_head prio_order_list;
 
 	/* lock for finding the next worker thread to queue on */
 	spinlock_t lock;
@@ -98,4 +99,5 @@ int btrfs_start_workers(struct btrfs_workers *workers, int num_workers);
 int btrfs_stop_workers(struct btrfs_workers *workers);
 void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max);
 int btrfs_requeue_work(struct btrfs_work *work);
+void btrfs_set_work_high_prio(struct btrfs_work *work);
 #endif
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index fec18b43c2c..a6b83744b05 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -579,6 +579,10 @@ int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode,
 	async->bio_flags = bio_flags;
 
 	atomic_inc(&fs_info->nr_async_submits);
+
+	if (rw & (1 << BIO_RW_SYNCIO))
+		btrfs_set_work_high_prio(&async->work);
+
 	btrfs_queue_worker(&fs_info->workers, &async->work);
 #if 0
 	int limit = btrfs_async_submit_limit(fs_info);
@@ -656,6 +660,7 @@ static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
 		return btrfs_map_bio(BTRFS_I(inode)->root, rw, bio,
 				     mirror_num, 0);
 	}
+
 	/*
 	 * kthread helpers are used to submit writes so that checksumming
 	 * can happen in parallel across all CPUs
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 483b6727aaa..5d66cb27e42 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2501,7 +2501,7 @@ int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
 	};
 	struct writeback_control wbc_writepages = {
 		.bdi		= wbc->bdi,
-		.sync_mode	= WB_SYNC_NONE,
+		.sync_mode	= wbc->sync_mode,
 		.older_than_this = NULL,
 		.nr_to_write	= 64,
 		.range_start	= page_offset(page) + PAGE_CACHE_SIZE,
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 9c9fb46ccd0..e21c0060ee7 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1131,7 +1131,7 @@ static ssize_t btrfs_file_write(struct file *file, const char __user *buf,
 		if (will_write) {
 			btrfs_fdatawrite_range(inode->i_mapping, pos,
 					       pos + write_bytes - 1,
-					       WB_SYNC_NONE);
+					       WB_SYNC_ALL);
 		} else {
 			balance_dirty_pages_ratelimited_nr(inode->i_mapping,
 							   num_pages);
-- 
GitLab


From 11c8349b4eb68f2b04cd8ece577377e6c0e5dd4b Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Apr 2009 15:50:09 -0400
Subject: [PATCH 0549/1421] Btrfs: fix oops on page->mapping->host during
 writepage

The extent_io writepage call updates the writepage index in the inode
as it makes progress.  But, it was doing the update after unlocking the page,
which isn't legal because page->mapping can't be trusted once the page
is unlocked.

This lead to an oops, especially common with compression turned on.  The
fix here is to update the writeback index before unlocking the page.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent_io.c | 40 ++++++++++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 8 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 5d66cb27e42..05a1c42e25b 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2104,6 +2104,16 @@ int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
 	return ret;
 }
 
+static noinline void update_nr_written(struct page *page,
+				      struct writeback_control *wbc,
+				      unsigned long nr_written)
+{
+	wbc->nr_to_write -= nr_written;
+	if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
+	    wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
+		page->mapping->writeback_index = page->index + nr_written;
+}
+
 /*
  * the writepage semantics are similar to regular writepage.  extent
  * records are inserted to lock ranges in the tree, and as dirty areas
@@ -2173,6 +2183,12 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 	delalloc_end = 0;
 	page_started = 0;
 	if (!epd->extent_locked) {
+		/*
+		 * make sure the wbc mapping index is at least updated
+		 * to this page.
+		 */
+		update_nr_written(page, wbc, 0);
+
 		while (delalloc_end < page_end) {
 			nr_delalloc = find_lock_delalloc_range(inode, tree,
 						       page,
@@ -2194,7 +2210,13 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 		 */
 		if (page_started) {
 			ret = 0;
-			goto update_nr_written;
+			/*
+			 * we've unlocked the page, so we can't update
+			 * the mapping's writeback index, just update
+			 * nr_to_write.
+			 */
+			wbc->nr_to_write -= nr_written;
+			goto done_unlocked;
 		}
 	}
 	lock_extent(tree, start, page_end, GFP_NOFS);
@@ -2207,13 +2229,18 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc,
 		if (ret == -EAGAIN) {
 			unlock_extent(tree, start, page_end, GFP_NOFS);
 			redirty_page_for_writepage(wbc, page);
+			update_nr_written(page, wbc, nr_written);
 			unlock_page(page);
 			ret = 0;
-			goto update_nr_written;
+			goto done_unlocked;
 		}
 	}
 
-	nr_written++;
+	/*
+	 * we don't want to touch the inode after unlocking the page,
+	 * so we update the mapping writeback index now
+	 */
+	update_nr_written(page, wbc, nr_written + 1);
 
 	end = page_end;
 	if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0))
@@ -2345,11 +2372,8 @@ done:
 		unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
 	unlock_page(page);
 
-update_nr_written:
-	wbc->nr_to_write -= nr_written;
-	if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
-	    wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
-		page->mapping->writeback_index = page->index + nr_written;
+done_unlocked:
+
 	return 0;
 }
 
-- 
GitLab


From 8c594ea81d7abbbffdda447b127f8ba8d76f319d Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 20 Apr 2009 15:50:10 -0400
Subject: [PATCH 0550/1421] Btrfs: use the right node in reada_for_balance

reada_for_balance was using the wrong index into the path node array,
so it wasn't reading the right blocks.  We never directly used the
results of the read done by this function because the btree search is
started over at the end.

This fixes reada_for_balance to reada in the correct node and to
avoid searching past the last slot in the node.  It also makes sure to
hold the parent lock while we are finding the nodes to read.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ctree.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index e5b2533b691..a99f1c2a710 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1325,12 +1325,12 @@ static noinline int reada_for_balance(struct btrfs_root *root,
 	int ret = 0;
 	int blocksize;
 
-	parent = path->nodes[level - 1];
+	parent = path->nodes[level + 1];
 	if (!parent)
 		return 0;
 
 	nritems = btrfs_header_nritems(parent);
-	slot = path->slots[level];
+	slot = path->slots[level + 1];
 	blocksize = btrfs_level_size(root, level);
 
 	if (slot > 0) {
@@ -1341,7 +1341,7 @@ static noinline int reada_for_balance(struct btrfs_root *root,
 			block1 = 0;
 		free_extent_buffer(eb);
 	}
-	if (slot < nritems) {
+	if (slot + 1 < nritems) {
 		block2 = btrfs_node_blockptr(parent, slot + 1);
 		gen = btrfs_node_ptr_generation(parent, slot + 1);
 		eb = btrfs_find_tree_block(root, block2, blocksize);
@@ -1351,7 +1351,11 @@ static noinline int reada_for_balance(struct btrfs_root *root,
 	}
 	if (block1 || block2) {
 		ret = -EAGAIN;
+
+		/* release the whole path */
 		btrfs_release_path(root, path);
+
+		/* read the blocks */
 		if (block1)
 			readahead_tree_block(root, block1, blocksize, 0);
 		if (block2)
@@ -1361,7 +1365,7 @@ static noinline int reada_for_balance(struct btrfs_root *root,
 			eb = read_tree_block(root, block1, blocksize, 0);
 			free_extent_buffer(eb);
 		}
-		if (block1) {
+		if (block2) {
 			eb = read_tree_block(root, block2, blocksize, 0);
 			free_extent_buffer(eb);
 		}
@@ -1481,12 +1485,15 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	 * of the btree by dropping locks before
 	 * we read.
 	 */
-	btrfs_release_path(NULL, p);
+	btrfs_unlock_up_safe(p, level + 1);
+	btrfs_set_path_blocking(p);
+
 	if (tmp)
 		free_extent_buffer(tmp);
 	if (p->reada)
 		reada_for_search(root, p, level, slot, key->objectid);
 
+	btrfs_release_path(NULL, p);
 	tmp = read_tree_block(root, blocknr, blocksize, gen);
 	if (tmp)
 		free_extent_buffer(tmp);
-- 
GitLab


From 968460ebd8006d55661dec0fb86712b40d71c413 Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Mon, 20 Apr 2009 18:54:21 +0530
Subject: [PATCH 0551/1421] cifs: Rename cifs_strncpy_to_host and fix buffer
 size

There is a possibility for the path_name and node_name buffers to
overflow if they contain charcters that are >2 bytes in the local
charset. Resize the buffer allocation so to avoid this possibility.

Also, as pointed out by Jeff Layton, it would be appropriate to
rename the function to cifs_strlcpy_to_host to reflect the fact
that the copied string is always NULL terminated.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a0845dc7b8a..a02c43b3faf 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -88,29 +88,29 @@ static struct {
  *	on failure - errno
  */
 static int
-cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
+cifs_strlcpy_to_host(char **dst, const char *src, const int maxlen,
 		 const bool is_unicode, const struct nls_table *nls_codepage)
 {
 	int plen;
 
 	if (is_unicode) {
 		plen = UniStrnlen((wchar_t *)src, maxlen);
-		*dst = kmalloc(plen + 2, GFP_KERNEL);
+		*dst = kmalloc((4 * plen) + 2, GFP_KERNEL);
 		if (!*dst)
-			goto cifs_strncpy_to_host_ErrExit;
+			goto cifs_strlcpy_to_host_ErrExit;
 		cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
+		(*dst)[plen] = 0;
+		(*dst)[plen+1] = 0; /* needed for Unicode */
 	} else {
 		plen = strnlen(src, maxlen);
 		*dst = kmalloc(plen + 2, GFP_KERNEL);
 		if (!*dst)
-			goto cifs_strncpy_to_host_ErrExit;
-		strncpy(*dst, src, plen);
+			goto cifs_strlcpy_to_host_ErrExit;
+		strlcpy(*dst, src, plen);
 	}
-	(*dst)[plen] = 0;
-	(*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
 	return 0;
 
-cifs_strncpy_to_host_ErrExit:
+cifs_strlcpy_to_host_ErrExit:
 	cERROR(1, ("Failed to allocate buffer for string\n"));
 	return -ENOMEM;
 }
@@ -4029,7 +4029,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy DfsPath */
 		temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
 		max_len = data_end - temp;
-		rc = cifs_strncpy_to_host(&(node->path_name), temp,
+		rc = cifs_strlcpy_to_host(&(node->path_name), temp,
 					max_len, is_unicode, nls_codepage);
 		if (rc)
 			goto parse_DFS_referrals_exit;
@@ -4037,7 +4037,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy link target UNC */
 		temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
 		max_len = data_end - temp;
-		rc = cifs_strncpy_to_host(&(node->node_name), temp,
+		rc = cifs_strlcpy_to_host(&(node->node_name), temp,
 					max_len, is_unicode, nls_codepage);
 		if (rc)
 			goto parse_DFS_referrals_exit;
-- 
GitLab


From 7b0c8fcff47a885743125dd843db64af41af5a61 Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Mon, 20 Apr 2009 18:54:36 +0530
Subject: [PATCH 0552/1421] cifs: Increase size of tmp_buf in cifs_readdir to
 avoid potential overflows

Increase size of tmp_buf to possible maximum to avoid potential
overflows.

Pointed-out-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/readdir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 1a8be622833..ebd0da7ecb3 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -1074,7 +1074,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 		with the rare long characters alloc more to account for
 		such multibyte target UTF-8 characters. cifs_unicode.c,
 		which actually does the conversion, has the same limit */
-		tmp_buf = kmalloc((2 * NAME_MAX) + 4, GFP_KERNEL);
+		tmp_buf = kmalloc((4 * NAME_MAX) + 2, GFP_KERNEL);
 		for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
 			if (current_entry == NULL) {
 				/* evaluate whether this case is an error */
-- 
GitLab


From 96ac7e88922da6ab33efea87c6b560ba5ab11e75 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Mon, 20 Apr 2009 13:53:15 -0700
Subject: [PATCH 0553/1421] RDMA/cxgb3: Adjust ORD/IRD (if needed) for
 peer2peer connections

NFS/RDMA currently fails to set up connections if peer2peer is on.
This is due to the fact that the NFS/RDMA client sets its ORD to 0.

If peer2peer is set, make sure the active side ORD is >= 1 and the
passive side IRD is >=1.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/iwch_cm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index fef3f1ae722..52d7bb0c2a1 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1830,6 +1830,10 @@ int iwch_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	ep->com.rpl_err = 0;
 	ep->ird = conn_param->ird;
 	ep->ord = conn_param->ord;
+
+	if (peer2peer && ep->ird == 0)
+		ep->ird = 1;
+
 	PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
 
 	get_ep(&ep->com);
@@ -1915,6 +1919,10 @@ int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		       conn_param->private_data, ep->plen);
 	ep->ird = conn_param->ird;
 	ep->ord = conn_param->ord;
+
+	if (peer2peer && ep->ord == 0)
+		ep->ord = 1;
+
 	ep->com.tdev = h->rdev.t3cdev_p;
 
 	cm_id->add_ref(cm_id);
-- 
GitLab


From e028cc55cc5c90a1c57eefe560a0cbb4df1fed14 Mon Sep 17 00:00:00 2001
From: Yossi Etigin <yosefe@voltaire.com>
Date: Mon, 20 Apr 2009 13:58:08 -0700
Subject: [PATCH 0554/1421] IPoIB: Disable NAPI while CQ is being drained

If NAPI is enabled while IPoIB's CQ is being drained, it creates a
race on priv->ibwc between ipoib_poll() and ipoib_drain_cq(), leading
to memory corruption.

The solution is to enable/disable NAPI in ipoib_ib_dev_{open/stop}()
instead of in ipoib_{open/stop}(), and sync NAPI on the INITIALIZED
flag instead on the ADMIN_UP flag. This way NAPI will be disabled when
ipoib_drain_cq() is called.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1587>.

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_ib.c   | 6 ++++--
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 5 +----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index da608273983..e7e5adf84e8 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -685,7 +685,8 @@ int ipoib_ib_dev_open(struct net_device *dev)
 	queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
 			   round_jiffies_relative(HZ));
 
-	set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+	if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+		napi_enable(&priv->napi);
 
 	return 0;
 }
@@ -804,7 +805,8 @@ int ipoib_ib_dev_stop(struct net_device *dev, int flush)
 	struct ipoib_tx_buf *tx_req;
 	int i;
 
-	clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+	if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+		napi_disable(&priv->napi);
 
 	ipoib_cm_dev_stop(dev);
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 421a6640c9b..ab2c192c76b 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -106,8 +106,7 @@ int ipoib_open(struct net_device *dev)
 
 	ipoib_dbg(priv, "bringing up interface\n");
 
-	if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
-		napi_enable(&priv->napi);
+	set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
 
 	if (ipoib_pkey_dev_delay_open(dev))
 		return 0;
@@ -143,7 +142,6 @@ err_stop:
 	ipoib_ib_dev_stop(dev, 1);
 
 err_disable:
-	napi_disable(&priv->napi);
 	clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
 
 	return -EINVAL;
@@ -156,7 +154,6 @@ static int ipoib_stop(struct net_device *dev)
 	ipoib_dbg(priv, "stopping interface\n");
 
 	clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
-	napi_disable(&priv->napi);
 
 	netif_stop_queue(dev);
 
-- 
GitLab


From 06c38d5e36b12d040839ff224e805146c0368556 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu, 9 Apr 2009 15:24:34 -0700
Subject: [PATCH 0555/1421] x86-64: fix FPU corruption with signals and
 preemption

In 64bit signal delivery path, clear_used_math() was happening before saving
the current active FPU state on to the user stack for signal handling. Between
clear_used_math() and the state store on to the user stack, potentially we
can get a page fault for the user address and can block. Infact, while testing
we were hitting the might_fault() in __clear_user() which can do a schedule().

At a later point in time, we will schedule back into this process and
resume the save state (using "xsave/fxsave" instruction) which can lead
to DNA fault. And as used_math was cleared before, we will reinit the FP state
in the DNA fault and continue. This reinit will result in loosing the
FPU state of the process.

Move clear_used_math() to a point after the FPU state has been stored
onto the user stack.

This issue is present from a long time (even before the xsave changes
and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x
series because of the __clear_user() in this path, which has an explicit
__cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY.

[ Impact: fix FPU state corruption ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org>			[2.6.28.x, 2.6.29.x]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/xsave.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 0a5b04aa98f..c5ee17e8c6d 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -89,7 +89,7 @@ int save_i387_xstate(void __user *buf)
 
 	if (!used_math())
 		return 0;
-	clear_used_math(); /* trigger finit */
+
 	if (task_thread_info(tsk)->status & TS_USEDFPU) {
 		/*
 	 	 * Start with clearing the user buffer. This will present a
@@ -114,6 +114,8 @@ int save_i387_xstate(void __user *buf)
 			return -1;
 	}
 
+	clear_used_math(); /* trigger finit */
+
 	if (task_thread_info(tsk)->status & TS_XSAVE) {
 		struct _fpstate __user *fx = buf;
 		struct _xstate __user *x = buf;
-- 
GitLab


From 1af9222b5223a7b04102dc8c403fa55fa15d5184 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 20 Apr 2009 14:50:36 -0700
Subject: [PATCH 0556/1421] RDMA/nes: Fix compiler warning at nes_verbs.c:1955

Initialize pbl_count_256 to 0 to get rid of the warning:

    drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_reg_mr':
    drivers/infiniband/hw/nes/nes_verbs.c:1955: warning: 'pbl_count_256' may be used uninitialized in this function

Reported-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 7e5b5ba13a7..9279d056185 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1952,7 +1952,7 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd,
 	int ret;
 	struct nes_adapter *nesadapter = nesdev->nesadapter;
 	uint pg_cnt = 0;
-	u16 pbl_count_256;
+	u16 pbl_count_256 = 0;
 	u16 pbl_count = 0;
 	u8  use_256_pbls = 0;
 	u8  use_4k_pbls = 0;
-- 
GitLab


From 3f32eb1185170524a81dadff2e67521585943a53 Mon Sep 17 00:00:00 2001
From: Don Wood <donald.e.wood@intel.com>
Date: Mon, 20 Apr 2009 14:53:00 -0700
Subject: [PATCH 0557/1421] RDMA/nes: Fix bugs in nes_reg_phys_mr()

The code incorrectly failed memory registration if the buffer was not
page aligned.  Also, the length field is mangled causing the hardware
to think the registration is much larger than it really is.

The fix is to remove the page alignment restriction as well the
incorrect length adjustment.  Also make sure that all buffers after
the first start at a page boundary, and all buffers except the last
end on a page boundary.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_verbs.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 9279d056185..f04bb1a5da4 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2122,6 +2122,7 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd,
 	struct nes_root_vpbl root_vpbl;
 	u32 stag;
 	u32 i;
+	unsigned long mask;
 	u32 stag_index = 0;
 	u32 next_stag_index = 0;
 	u32 driver_key = 0;
@@ -2150,6 +2151,9 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd,
 		return ERR_PTR(-E2BIG);
 	}
 
+	if ((buffer_list[0].addr ^ *iova_start) & ~PAGE_MASK)
+		return ERR_PTR(-EINVAL);
+
 	err = nes_alloc_resource(nesadapter, nesadapter->allocated_mrs, nesadapter->max_mr,
 			&stag_index, &next_stag_index);
 	if (err) {
@@ -2215,19 +2219,16 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd,
 			root_pbl_index++;
 			cur_pbl_index = 0;
 		}
-		if (buffer_list[i].addr & ~PAGE_MASK) {
-			/* TODO: Unwind allocated buffers */
-			nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
-			nes_debug(NES_DBG_MR, "Unaligned Memory Buffer: 0x%x\n",
-					(unsigned int) buffer_list[i].addr);
-			ibmr = ERR_PTR(-EINVAL);
-			kfree(nesmr);
-			goto reg_phys_err;
-		}
 
-		if (!buffer_list[i].size) {
+		mask = !buffer_list[i].size;
+		if (i != 0)
+			mask |= buffer_list[i].addr;
+		if (i != num_phys_buf - 1)
+			mask |= buffer_list[i].addr + buffer_list[i].size;
+
+		if (mask & ~PAGE_MASK) {
 			nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
-			nes_debug(NES_DBG_MR, "Invalid Buffer Size\n");
+			nes_debug(NES_DBG_MR, "Invalid buffer addr or size\n");
 			ibmr = ERR_PTR(-EINVAL);
 			kfree(nesmr);
 			goto reg_phys_err;
@@ -2238,7 +2239,7 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd,
 			if ((buffer_list[i-1].addr+PAGE_SIZE) != buffer_list[i].addr)
 				single_page = 0;
 		}
-		vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr);
+		vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr & PAGE_MASK);
 		vpbl.pbl_vbase[cur_pbl_index++].pa_high =
 				cpu_to_le32((u32)((((u64)buffer_list[i].addr) >> 32)));
 	}
@@ -2251,8 +2252,6 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd,
 			" length = 0x%016lX, index = 0x%08X\n",
 			stag, (unsigned long)*iova_start, (unsigned long)region_length, stag_index);
 
-	region_length -= (*iova_start)&PAGE_MASK;
-
 	/* Make the leaf PBL the root if only one PBL */
 	if (root_pbl_index == 1) {
 		root_vpbl.pbl_pbase = vpbl.pbl_pbase;
-- 
GitLab


From 8c31813f31cd4403b46802866949a95a6e8fa584 Mon Sep 17 00:00:00 2001
From: Toshinobu Sugioka <sugioka@itonet.co.jp>
Date: Tue, 21 Apr 2009 07:34:53 +0900
Subject: [PATCH 0558/1421] sh: Fix mmap2 for handling differing PAGE_SIZEs.

mmap2 uses a fixed page shift of 12, regardless of the PAGE_SIZE setting.
Fix up the mmap2 code to add some sanity checks on the mapping, and to
update pgoff accordingly.

Error handling bits based on 4280e3126f641898f0ed1a931645373d3489e2a6
("frv: fix mmap2 error handling").

Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sys_sh.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 58dfc02c7af..e3a7e36639e 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -63,6 +63,15 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
+	/*
+	 * The shift for mmap2 is constant, regardless of PAGE_SIZE
+	 * setting.
+	 */
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+		return -EINVAL;
+
+	pgoff >>= PAGE_SHIFT - 12;
+
 	return do_mmap2(addr, len, prot, flags, fd, pgoff);
 }
 
-- 
GitLab


From cde9e2f9307dd6af6bf8c5f02e41a6e27da9682a Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Mon, 20 Apr 2009 17:00:53 -0700
Subject: [PATCH 0559/1421] RDMA/cxgb3: Don't zero QP attrs when moving to IDLE

QP attributes must stay initialized when moving back to IDLE.  Zeroing
them will crash the system in _flush_qp() if the QP is subsequently
moved to ERROR and back to IDLE.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/iwch_qp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 2f546a62533..27bbdc8e773 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -1069,7 +1069,6 @@ int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp,
 			goto out;
 		}
 		qhp->attr.state = IWCH_QP_STATE_IDLE;
-		memset(&qhp->attr, 0, sizeof(qhp->attr));
 		break;
 	case IWCH_QP_STATE_TERMINATE:
 		if (!internal) {
-- 
GitLab


From cf2706a340ae98616d4e2a54900393e0e0b6b72c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 7 Apr 2009 09:03:30 -0400
Subject: [PATCH 0560/1421] Fix AUTOFS_DEV_IOCTL_REQUESTER_CMD

Missing conversion from kernel to userland dev_t; this sucker
breaks as soon as we get sufficiently many autofs mounts for
new_encode_dev(s_dev) != s_dev.

Note: this is the minimal fix.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/autofs4/dev-ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 9e5ae8a4f5c..463f798f71b 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -488,7 +488,7 @@ static int autofs_dev_ioctl_requester(struct file *fp,
 	}
 
 	path = param->path;
-	devid = sbi->sb->s_dev;
+	devid = new_encode_dev(sbi->sb->s_dev);
 
 	param->requester.uid = param->requester.gid = -1;
 
-- 
GitLab


From e5d67f0715bc60f6c19abdd86d007d7bb29c9951 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 7 Apr 2009 12:15:39 -0400
Subject: [PATCH 0561/1421] Touch all affected namespaces on propagation of
 mount

We shouldn't just touch the namespace of current process

Caught-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namespace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/namespace.c b/fs/namespace.c
index d9138f81ec1..41196209a90 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1377,7 +1377,7 @@ static int attach_recursive_mnt(struct vfsmount *source_mnt,
 	if (parent_path) {
 		detach_mnt(source_mnt, parent_path);
 		attach_mnt(source_mnt, path);
-		touch_mnt_namespace(current->nsproxy->mnt_ns);
+		touch_mnt_namespace(parent_path->mnt->mnt_ns);
 	} else {
 		mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
 		commit_tree(source_mnt);
-- 
GitLab


From 1644ccc8a99ae73859c39372f96afdbf03c9f80d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Apr 2009 02:32:31 -0400
Subject: [PATCH 0562/1421] Safer nfsd_cross_mnt()

AFAICS, we have a subtle bug there: if we have crossed mountpoint
*and* it got mount --move'd away, we'll be holding only one
reference to fs containing dentry - exp->ex_path.mnt.  IOW, we
ought to dput() before exp_put().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/nfsd/vfs.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ab93fcfef25..46e6bd2d4f0 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -116,10 +116,15 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, struct dentry **dpp,
 	}
 	if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
 		/* successfully crossed mount point */
-		exp_put(exp);
-		*expp = exp2;
+		/*
+		 * This is subtle: dentry is *not* under mnt at this point.
+		 * The only reason we are safe is that original mnt is pinned
+		 * down by exp, so we should dput before putting exp.
+		 */
 		dput(dentry);
 		*dpp = mounts;
+		exp_put(exp);
+		*expp = exp2;
 	} else {
 		exp_put(exp2);
 		dput(mounts);
-- 
GitLab


From 24b6f16ecf37f918a1934d590e9e71c100d6388f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Apr 2009 03:25:41 -0400
Subject: [PATCH 0563/1421] No need for crossing to mountpoint in
 audit_tag_tree()

is_under() will DTRT anyway.  And yes, is_subdir() behaviour
is intentional.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/dcache.c         | 1 -
 kernel/audit_tree.c | 3 ---
 2 files changed, 4 deletions(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 761d30be268..1fcffebfb44 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2149,7 +2149,6 @@ int is_subdir(struct dentry *new_dentry, struct dentry *old_dentry)
 	int result;
 	unsigned long seq;
 
-	/* FIXME: This is old behavior, needed? Please check callers. */
 	if (new_dentry == old_dentry)
 		return 1;
 
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 917ab952556..6e7351739a8 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -734,9 +734,6 @@ int audit_tag_tree(char *old, char *new)
 	dentry = dget(path.dentry);
 	path_put(&path);
 
-	if (dentry == tagged->mnt_root && dentry == mnt->mnt_root)
-		follow_up(&mnt, &dentry);
-
 	list_add_tail(&list, &tagged->mnt_list);
 
 	mutex_lock(&audit_filter_mutex);
-- 
GitLab


From 117aff744a20a2a04ccdb36cd5978316e1af0c3a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Apr 2009 11:19:26 -0400
Subject: [PATCH 0564/1421] Fix autofs_expire()

mnt should remain the same for all iterations through the list;
as it is, if we have a busy mount, mnt follows into it and isn't
restored for the next iteration.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/autofs/dirhash.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/fs/autofs/dirhash.c b/fs/autofs/dirhash.c
index bf8c8af9800..4eb4d8dfb2f 100644
--- a/fs/autofs/dirhash.c
+++ b/fs/autofs/dirhash.c
@@ -39,10 +39,12 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb,
 {
 	struct autofs_dirhash *dh = &sbi->dirhash;
 	struct autofs_dir_ent *ent;
-	struct dentry *dentry;
 	unsigned long timeout = sbi->exp_timeout;
 
 	while (1) {
+		struct path path;
+		int umount_ok;
+
 		if ( list_empty(&dh->expiry_head) || sbi->catatonic )
 			return NULL;	/* No entries */
 		/* We keep the list sorted by last_usage and want old stuff */
@@ -57,17 +59,17 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb,
 			return ent; /* Symlinks are always expirable */
 
 		/* Get the dentry for the autofs subdirectory */
-		dentry = ent->dentry;
+		path.dentry = ent->dentry;
 
-		if ( !dentry ) {
+		if (!path.dentry) {
 			/* Should only happen in catatonic mode */
 			printk("autofs: dentry == NULL but inode range is directory, entry %s\n", ent->name);
 			autofs_delete_usage(ent);
 			continue;
 		}
 
-		if ( !dentry->d_inode ) {
-			dput(dentry);
+		if (!path.dentry->d_inode) {
+			dput(path.dentry);
 			printk("autofs: negative dentry on expiry queue: %s\n",
 			       ent->name);
 			autofs_delete_usage(ent);
@@ -76,29 +78,29 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb,
 
 		/* Make sure entry is mounted and unused; note that dentry will
 		   point to the mounted-on-top root. */
-		if (!S_ISDIR(dentry->d_inode->i_mode)||!d_mountpoint(dentry)) {
+		if (!S_ISDIR(path.dentry->d_inode->i_mode) ||
+		    !d_mountpoint(path.dentry)) {
 			DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
 			continue;
 		}
-		mntget(mnt);
-		dget(dentry);
-		if (!follow_down(&mnt, &dentry)) {
-			dput(dentry);
-			mntput(mnt);
+		path.mnt = mnt;
+		path_get(&path);
+		if (!follow_down(&path.mnt, &path.dentry)) {
+			path_put(&path);
 			DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
 			continue;
 		}
-		while (d_mountpoint(dentry) && follow_down(&mnt, &dentry))
+		while (d_mountpoint(path.dentry) &&
+		       follow_down(&path.mnt, &path.dentry))
 			;
-		dput(dentry);
+		umount_ok = may_umount(path.mnt);
+		path_put(&path);
 
-		if ( may_umount(mnt) ) {
-			mntput(mnt);
+		if (umount_ok) {
 			DPRINTK(("autofs: signaling expire on %s\n", ent->name));
 			return ent; /* Expirable! */
 		}
 		DPRINTK(("autofs: didn't expire due to may_umount: %s\n", ent->name));
-		mntput(mnt);
 	}
 	return NULL;		/* No expirable entries */
 }
-- 
GitLab


From 1ba0c7dbbbc24230394100c5f0d0df38cb400cff Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Mon, 20 Apr 2009 12:23:02 +0400
Subject: [PATCH 0565/1421] fs/compat_ioctl: fix build when !BLOCK

In file included from fs/compat_ioctl.c:61:
include/linux/loop.h:59: error: field 'lo_bio_list' has incomplete type

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/compat_ioctl.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 3e87ce443ea..b83f6bcfa51 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -58,7 +58,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-dev.h>
 #include <linux/atalk.h>
-#include <linux/loop.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci.h>
@@ -68,6 +67,7 @@
 #include <linux/gigaset_dev.h>
 
 #ifdef CONFIG_BLOCK
+#include <linux/loop.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_ioctl.h>
 #include <scsi/sg.h>
@@ -2660,6 +2660,8 @@ HANDLE_IOCTL(SONET_GETFRAMING, do_atm_ioctl)
 HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
 /* block stuff */
 #ifdef CONFIG_BLOCK
+/* loop */
+IGNORE_IOCTL(LOOP_CLR_FD)
 /* Raw devices */
 HANDLE_IOCTL(RAW_SETBIND, raw_ioctl)
 HANDLE_IOCTL(RAW_GETBIND, raw_ioctl)
@@ -2728,9 +2730,6 @@ HANDLE_IOCTL(LPSETTIMEOUT, lp_timeout_trans)
 IGNORE_IOCTL(VFAT_IOCTL_READDIR_BOTH32)
 IGNORE_IOCTL(VFAT_IOCTL_READDIR_SHORT32)
 
-/* loop */
-IGNORE_IOCTL(LOOP_CLR_FD)
-
 #ifdef CONFIG_SPARC
 /* Sparc framebuffers, handled in sbusfb_compat_ioctl() */
 IGNORE_IOCTL(FBIOGTYPE)
-- 
GitLab


From 2f9092e1020246168b1309b35e085ecd7ff9ff72 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Mon, 20 Apr 2009 23:18:37 +0100
Subject: [PATCH 0566/1421] Fix i_mutex vs. readdir handling in nfsd

Commit 14f7dd63 ("Copy XFS readdir hack into nfsd code") introduced a
bug to generic code which had been extant for a long time in the XFS
version -- it started to call through into lookup_one_len() and hence
into the file systems' ->lookup() methods without i_mutex held on the
directory.

This patch fixes it by locking the directory's i_mutex again before
calling the filldir functions. The original deadlocks which commit
14f7dd63 was designed to avoid are still avoided, because they were due
to fs-internal locking, not i_mutex.

While we're at it, fix the return type of nfsd_buffered_readdir() which
should be a __be32 not an int -- it's an NFS errno, not a Linux errno.
And return nfserrno(-ENOMEM) when allocation fails, not just -ENOMEM.
Sparse would have caught that, if it wasn't so busy bitching about
__cold__.

Commit 05f4f678 ("nfsd4: don't do lookup within readdir in recovery
code") introduced a similar problem with calling lookup_one_len()
without i_mutex, which this patch also addresses. To fix that, it was
necessary to fix the called functions so that they expect i_mutex to be
held; that part was done by J. Bruce Fields.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Umm-I-can-live-with-that-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Tested-by: J. Bruce Fields <bfields@citi.umich.edu>
LKML-Reference: <8036.1237474444@jrobl>
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namei.c            |  2 ++
 fs/nfsd/nfs4recover.c | 46 +++++++++----------------------------------
 fs/nfsd/vfs.c         | 25 +++++++++++++++++------
 3 files changed, 30 insertions(+), 43 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index b8433ebfae0..78f253cd2d4 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1248,6 +1248,8 @@ struct dentry *lookup_one_len(const char *name, struct dentry *base, int len)
 	int err;
 	struct qstr this;
 
+	WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
+
 	err = __lookup_one_len(name, &this, base, len);
 	if (err)
 		return ERR_PTR(err);
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 3444c0052a8..5275097a756 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -229,21 +229,23 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f)
 		goto out;
 	status = vfs_readdir(filp, nfsd4_build_namelist, &names);
 	fput(filp);
+	mutex_lock(&dir->d_inode->i_mutex);
 	while (!list_empty(&names)) {
 		entry = list_entry(names.next, struct name_list, list);
 
 		dentry = lookup_one_len(entry->name, dir, HEXDIR_LEN-1);
 		if (IS_ERR(dentry)) {
 			status = PTR_ERR(dentry);
-			goto out;
+			break;
 		}
 		status = f(dir, dentry);
 		dput(dentry);
 		if (status)
-			goto out;
+			break;
 		list_del(&entry->list);
 		kfree(entry);
 	}
+	mutex_unlock(&dir->d_inode->i_mutex);
 out:
 	while (!list_empty(&names)) {
 		entry = list_entry(names.next, struct name_list, list);
@@ -254,36 +256,6 @@ out:
 	return status;
 }
 
-static int
-nfsd4_remove_clid_file(struct dentry *dir, struct dentry *dentry)
-{
-	int status;
-
-	if (!S_ISREG(dir->d_inode->i_mode)) {
-		printk("nfsd4: non-file found in client recovery directory\n");
-		return -EINVAL;
-	}
-	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
-	status = vfs_unlink(dir->d_inode, dentry);
-	mutex_unlock(&dir->d_inode->i_mutex);
-	return status;
-}
-
-static int
-nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry)
-{
-	int status;
-
-	/* For now this directory should already be empty, but we empty it of
-	 * any regular files anyway, just in case the directory was created by
-	 * a kernel from the future.... */
-	nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
-	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
-	status = vfs_rmdir(dir->d_inode, dentry);
-	mutex_unlock(&dir->d_inode->i_mutex);
-	return status;
-}
-
 static int
 nfsd4_unlink_clid_dir(char *name, int namlen)
 {
@@ -294,18 +266,18 @@ nfsd4_unlink_clid_dir(char *name, int namlen)
 
 	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
 	dentry = lookup_one_len(name, rec_dir.dentry, namlen);
-	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 	if (IS_ERR(dentry)) {
 		status = PTR_ERR(dentry);
-		return status;
+		goto out_unlock;
 	}
 	status = -ENOENT;
 	if (!dentry->d_inode)
 		goto out;
-
-	status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry);
+	status = vfs_rmdir(rec_dir.dentry->d_inode, dentry);
 out:
 	dput(dentry);
+out_unlock:
+	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 	return status;
 }
 
@@ -348,7 +320,7 @@ purge_old(struct dentry *parent, struct dentry *child)
 	if (nfs4_has_reclaimed_state(child->d_name.name, false))
 		return 0;
 
-	status = nfsd4_clear_clid_dir(parent, child);
+	status = vfs_rmdir(parent->d_inode, child);
 	if (status)
 		printk("failed to remove client recovery directory %s\n",
 				child->d_name.name);
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 46e6bd2d4f0..6c68ffd6b4b 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1890,8 +1890,8 @@ static int nfsd_buffered_filldir(void *__buf, const char *name, int namlen,
 	return 0;
 }
 
-static int nfsd_buffered_readdir(struct file *file, filldir_t func,
-				 struct readdir_cd *cdp, loff_t *offsetp)
+static __be32 nfsd_buffered_readdir(struct file *file, filldir_t func,
+				    struct readdir_cd *cdp, loff_t *offsetp)
 {
 	struct readdir_data buf;
 	struct buffered_dirent *de;
@@ -1901,11 +1901,12 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func,
 
 	buf.dirent = (void *)__get_free_page(GFP_KERNEL);
 	if (!buf.dirent)
-		return -ENOMEM;
+		return nfserrno(-ENOMEM);
 
 	offset = *offsetp;
 
 	while (1) {
+		struct inode *dir_inode = file->f_path.dentry->d_inode;
 		unsigned int reclen;
 
 		cdp->err = nfserr_eof; /* will be cleared on successful read */
@@ -1924,26 +1925,38 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func,
 		if (!size)
 			break;
 
+		/*
+		 * Various filldir functions may end up calling back into
+		 * lookup_one_len() and the file system's ->lookup() method.
+		 * These expect i_mutex to be held, as it would within readdir.
+		 */
+		host_err = mutex_lock_killable(&dir_inode->i_mutex);
+		if (host_err)
+			break;
+
 		de = (struct buffered_dirent *)buf.dirent;
 		while (size > 0) {
 			offset = de->offset;
 
 			if (func(cdp, de->name, de->namlen, de->offset,
 				 de->ino, de->d_type))
-				goto done;
+				break;
 
 			if (cdp->err != nfs_ok)
-				goto done;
+				break;
 
 			reclen = ALIGN(sizeof(*de) + de->namlen,
 				       sizeof(u64));
 			size -= reclen;
 			de = (struct buffered_dirent *)((char *)de + reclen);
 		}
+		mutex_unlock(&dir_inode->i_mutex);
+		if (size > 0) /* We bailed out early */
+			break;
+
 		offset = vfs_llseek(file, 0, SEEK_CUR);
 	}
 
- done:
 	free_page((unsigned long)(buf.dirent));
 
 	if (host_err)
-- 
GitLab


From 66672fefaa91802fec51c3fe0cc55bc9baea5a2d Mon Sep 17 00:00:00 2001
From: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Date: Mon, 20 Apr 2009 18:38:28 -0700
Subject: [PATCH 0567/1421] Documentation/filesystems: remove out of date
 reference to BKL being held

Documentation/filesystems/vfs.txt incorrectly states that the kernel is
locked during the call to statfs (Documentation/filesystems/Locking
correctly says it is not). This patch removes the offending sentence.

remove reference to BKL being held in statfs

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 Documentation/filesystems/vfs.txt | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index deeeed0faa8..f49eecf2e57 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -277,8 +277,7 @@ or bottom half).
   unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
   	again.
 
-  statfs: called when the VFS needs to get filesystem statistics. This
-	is called with the kernel lock held
+  statfs: called when the VFS needs to get filesystem statistics.
 
   remount_fs: called when the filesystem is remounted. This is called
 	with the kernel lock held
-- 
GitLab


From 3eac8778a237d83a1e553eba0c6f4fd4b39eeec0 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 7 Apr 2009 11:12:46 -0400
Subject: [PATCH 0568/1421] autofs4: use memchr() in invalid_string()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/autofs4/dev-ioctl.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 463f798f71b..84168c0dcc2 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -54,11 +54,10 @@ static int check_name(const char *name)
  * Check a string doesn't overrun the chunk of
  * memory we copied from user land.
  */
-static int invalid_str(char *str, void *end)
+static int invalid_str(char *str, size_t size)
 {
-	while ((void *) str <= end)
-		if (!*str++)
-			return 0;
+	if (memchr(str, 0, size))
+		return 0;
 	return -EINVAL;
 }
 
@@ -138,8 +137,7 @@ static int validate_dev_ioctl(int cmd, struct autofs_dev_ioctl *param)
 	}
 
 	if (param->size > sizeof(*param)) {
-		err = invalid_str(param->path,
-				 (void *) ((size_t) param + param->size));
+		err = invalid_str(param->path, param->size - sizeof(*param));
 		if (err) {
 			AUTOFS_WARN(
 			  "path string terminator missing for cmd(0x%08x)",
-- 
GitLab


From 3939fcde24473dc09ce16e922c88df9b3bee45d9 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 8 Apr 2009 15:06:12 +0800
Subject: [PATCH 0569/1421] xattr: use memdup_user()

Remove open-coded memdup_user()

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/xattr.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/xattr.c b/fs/xattr.c
index 197c4fcac03..d51b8f9db92 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -237,13 +237,9 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value,
 	if (size) {
 		if (size > XATTR_SIZE_MAX)
 			return -E2BIG;
-		kvalue = kmalloc(size, GFP_KERNEL);
-		if (!kvalue)
-			return -ENOMEM;
-		if (copy_from_user(kvalue, value, size)) {
-			kfree(kvalue);
-			return -EFAULT;
-		}
+		kvalue = memdup_user(value, size);
+		if (IS_ERR(kvalue))
+			return PTR_ERR(kvalue);
 	}
 
 	error = vfs_setxattr(d, kname, kvalue, size, flags);
-- 
GitLab


From dae7b665cf6d6e6e733f1c9c16cf55547dd37e33 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 8 Apr 2009 15:06:54 +0800
Subject: [PATCH 0570/1421] btrfs: use memdup_user()

Remove open-coded memdup_user().

Note this changes some GFP_NOFS to GFP_KERNEL, since copy_from_user() may
cause pagefault, it's pointless to pass GFP_NOFS to kmalloc().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/btrfs/ioctl.c | 49 ++++++++++++------------------------------------
 fs/btrfs/super.c | 13 ++++---------
 2 files changed, 16 insertions(+), 46 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 7594bec1be1..9f135e87850 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -461,15 +461,9 @@ static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	namelen = strlen(vol_args->name);
@@ -545,7 +539,6 @@ static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
 
 out_unlock:
 	mutex_unlock(&root->fs_info->volume_mutex);
-out:
 	kfree(vol_args);
 	return ret;
 }
@@ -565,15 +558,9 @@ static noinline int btrfs_ioctl_snap_create(struct file *file,
 	if (root->fs_info->sb->s_flags & MS_RDONLY)
 		return -EROFS;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	namelen = strlen(vol_args->name);
@@ -675,19 +662,13 @@ static long btrfs_ioctl_add_dev(struct btrfs_root *root, void __user *arg)
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	ret = btrfs_init_new_device(root, vol_args->name);
 
-out:
 	kfree(vol_args);
 	return ret;
 }
@@ -703,19 +684,13 @@ static long btrfs_ioctl_rm_dev(struct btrfs_root *root, void __user *arg)
 	if (root->fs_info->sb->s_flags & MS_RDONLY)
 		return -EROFS;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	ret = btrfs_rm_device(root, vol_args->name);
 
-out:
 	kfree(vol_args);
 	return ret;
 }
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9744af9d71e..a7acfe639a4 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -635,14 +635,9 @@ static long btrfs_control_ioctl(struct file *file, unsigned int cmd,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	vol = kmalloc(sizeof(*vol), GFP_KERNEL);
-	if (!vol)
-		return -ENOMEM;
-
-	if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) {
-		ret = -EFAULT;
-		goto out;
-	}
+	vol = memdup_user((void __user *)arg, sizeof(*vol));
+	if (IS_ERR(vol))
+		return PTR_ERR(vol);
 
 	switch (cmd) {
 	case BTRFS_IOC_SCAN_DEV:
@@ -650,7 +645,7 @@ static long btrfs_control_ioctl(struct file *file, unsigned int cmd,
 					    &btrfs_fs_type, &fs_devices);
 		break;
 	}
-out:
+
 	kfree(vol);
 	return ret;
 }
-- 
GitLab


From 1c8542c7bb239ef02fe21477acd9cdac04c1b640 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 8 Apr 2009 15:07:30 +0800
Subject: [PATCH 0571/1421] sysfs: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/sysfs/bin.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 93e0c0281d4..9345806c885 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -157,14 +157,9 @@ static ssize_t write(struct file *file, const char __user *userbuf,
 			count = size - offs;
 	}
 
-	temp = kmalloc(count, GFP_KERNEL);
-	if (!temp)
-		return -ENOMEM;
-
-	if (copy_from_user(temp, userbuf, count)) {
-		count = -EFAULT;
-		goto out_free;
-	}
+	temp = memdup_user(userbuf, count);
+	if (IS_ERR(temp))
+		return PTR_ERR(temp);
 
 	mutex_lock(&bb->mutex);
 
@@ -176,8 +171,6 @@ static ssize_t write(struct file *file, const char __user *userbuf,
 	if (count > 0)
 		*off = offs + count;
 
-out_free:
-	kfree(temp);
 	return count;
 }
 
-- 
GitLab


From 0e639bdeef26faf287db77a15530f3f295a4ae04 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 8 Apr 2009 15:08:04 +0800
Subject: [PATCH 0572/1421] xfs: use memdup_user()

Remove open-coded memdup_user()

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/xfs/linux-2.6/xfs_ioctl.c   | 23 +++++++----------------
 fs/xfs/linux-2.6/xfs_ioctl32.c | 12 ++++--------
 2 files changed, 11 insertions(+), 24 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index d0b499418a7..34eaab608e6 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -489,17 +489,12 @@ xfs_attrmulti_attr_set(
 	if (len > XATTR_SIZE_MAX)
 		return EINVAL;
 
-	kbuf = kmalloc(len, GFP_KERNEL);
-	if (!kbuf)
-		return ENOMEM;
-
-	if (copy_from_user(kbuf, ubuf, len))
-		goto out_kfree;
+	kbuf = memdup_user(ubuf, len);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
 
 	error = xfs_attr_set(XFS_I(inode), name, kbuf, len, flags);
 
- out_kfree:
-	kfree(kbuf);
 	return error;
 }
 
@@ -540,20 +535,16 @@ xfs_attrmulti_by_handle(
 	if (!size || size > 16 * PAGE_SIZE)
 		goto out_dput;
 
-	error = ENOMEM;
-	ops = kmalloc(size, GFP_KERNEL);
-	if (!ops)
+	ops = memdup_user(am_hreq.ops, size);
+	if (IS_ERR(ops)) {
+		error = PTR_ERR(ops);
 		goto out_dput;
-
-	error = EFAULT;
-	if (copy_from_user(ops, am_hreq.ops, size))
-		goto out_kfree_ops;
+	}
 
 	attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
 	if (!attr_name)
 		goto out_kfree_ops;
 
-
 	error = 0;
 	for (i = 0; i < am_hreq.opcount; i++) {
 		ops[i].am_error = strncpy_from_user(attr_name,
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index c70c4e3db79..0882d166239 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -427,20 +427,16 @@ xfs_compat_attrmulti_by_handle(
 	if (!size || size > 16 * PAGE_SIZE)
 		goto out_dput;
 
-	error = ENOMEM;
-	ops = kmalloc(size, GFP_KERNEL);
-	if (!ops)
+	ops = memdup_user(compat_ptr(am_hreq.ops), size);
+	if (IS_ERR(ops)) {
+		error = PTR_ERR(ops);
 		goto out_dput;
-
-	error = EFAULT;
-	if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
-		goto out_kfree_ops;
+	}
 
 	attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
 	if (!attr_name)
 		goto out_kfree_ops;
 
-
 	error = 0;
 	for (i = 0; i < am_hreq.opcount; i++) {
 		ops[i].am_error = strncpy_from_user(attr_name,
-- 
GitLab


From a9482ebcdedbc5872ed34a266e6a45c35116f264 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 8 Apr 2009 15:08:53 +0800
Subject: [PATCH 0573/1421] ncpfs: use memdup_user()

Remove open-coded memdup_user()

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ncpfs/ioctl.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index f54360f50a9..fa038df63ac 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -660,13 +660,10 @@ outrel:
 			if (user.object_name_len > NCP_OBJECT_NAME_MAX_LEN)
 				return -ENOMEM;
 			if (user.object_name_len) {
-				newname = kmalloc(user.object_name_len, GFP_USER);
-				if (!newname)
-					return -ENOMEM;
-				if (copy_from_user(newname, user.object_name, user.object_name_len)) {
-					kfree(newname);
-					return -EFAULT;
-				}
+				newname = memdup_user(user.object_name,
+						      user.object_name_len);
+				if (IS_ERR(newname))
+					return PTR_ERR(newname);
 			} else {
 				newname = NULL;
 			}
@@ -760,13 +757,9 @@ outrel:
 			if (user.len > NCP_PRIVATE_DATA_MAX_LEN)
 				return -ENOMEM;
 			if (user.len) {
-				new = kmalloc(user.len, GFP_USER);
-				if (!new)
-					return -ENOMEM;
-				if (copy_from_user(new, user.data, user.len)) {
-					kfree(new);
-					return -EFAULT;
-				}
+				new = memdup_user(user.data, user.len);
+				if (IS_ERR(new))
+					return PTR_ERR(new);
 			} else {
 				new = NULL;
 			}
-- 
GitLab


From fd56d242b3b80b6f2ca174272b20029aae61df75 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 8 Apr 2009 15:09:29 +0800
Subject: [PATCH 0574/1421] ecryptfs: use memdup_user()

Remove open-coded memdup_user().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ecryptfs/miscdev.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index a67fea655f4..dda3c58eefc 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -418,18 +418,13 @@ ecryptfs_miscdev_write(struct file *file, const char __user *buf,
 
 	if (count == 0)
 		goto out;
-	data = kmalloc(count, GFP_KERNEL);
-	if (!data) {
-		printk(KERN_ERR "%s: Out of memory whilst attempting to "
-		       "kmalloc([%zd], GFP_KERNEL)\n", __func__, count);
+
+	data = memdup_user(buf, count);
+	if (IS_ERR(data)) {
+		printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
+		       __func__, PTR_ERR(data));
 		goto out;
 	}
-	rc = copy_from_user(data, buf, count);
-	if (rc) {
-		printk(KERN_ERR "%s: copy_from_user returned error [%d]\n",
-		       __func__, rc);
-		goto out_free;
-	}
 	sz = count;
 	i = 0;
 	switch (data[i++]) {
-- 
GitLab


From 0112fc2229847feb6c4eb011e6833d8f1742a375 Mon Sep 17 00:00:00 2001
From: Oleg Drokin <green@linuxhacker.ru>
Date: Wed, 8 Apr 2009 20:05:42 +0400
Subject: [PATCH 0575/1421] Separate out common fstatat code into vfs_fstatat

This is a version incorporating Christoph's suggestion.

Separate out common *fstatat functionality into a single function
instead of duplicating it all over the code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/arm/kernel/sys_oabi-compat.c | 19 +++--------
 arch/s390/kernel/compat_linux.c   | 18 +++-------
 arch/sparc/kernel/sys_sparc32.c   | 19 +++--------
 arch/x86/ia32/sys_ia32.c          | 19 +++--------
 fs/compat.c                       | 19 +++--------
 fs/stat.c                         | 56 +++++++++++++++----------------
 include/linux/fs.h                |  1 +
 7 files changed, 54 insertions(+), 97 deletions(-)

diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index e04173c7e62..d59a0cd537f 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -177,21 +177,12 @@ asmlinkage long sys_oabi_fstatat64(int dfd,
 				   int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-	error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_oldabi_stat64(&stat, statbuf);
 }
 
 struct oabi_flock64 {
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 6cc87d8c868..002c70d3cb7 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -702,20 +702,12 @@ asmlinkage long sys32_fstatat64(unsigned int dfd, char __user *filename,
 				struct stat64_emu31 __user* statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
-
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_stat64(statbuf, &stat);
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_stat64(statbuf, &stat);
 }
 
 /*
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index e800503879e..f5000a460c0 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -206,21 +206,12 @@ asmlinkage long compat_sys_fstatat64(unsigned int dfd, char __user *filename,
 		struct compat_stat64 __user * statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
-
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_compat_stat64(&stat, statbuf);
+	int error;
 
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_compat_stat64(&stat, statbuf);
 }
 
 asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index efac92fd1ef..085a8c35f14 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -129,21 +129,12 @@ asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
 			      struct stat64 __user *statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_stat64(statbuf, &stat);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_stat64(statbuf, &stat);
 }
 
 /*
diff --git a/fs/compat.c b/fs/compat.c
index 3f84d5f1588..dda72e26709 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -204,21 +204,12 @@ asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user *filename,
 		struct compat_stat __user *statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
-
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_compat_stat(&stat, statbuf);
+	int error;
 
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_compat_stat(&stat, statbuf);
 }
 #endif
 
diff --git a/fs/stat.c b/fs/stat.c
index 2db740a0cfb..54711662b85 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -109,6 +109,24 @@ int vfs_fstat(unsigned int fd, struct kstat *stat)
 
 EXPORT_SYMBOL(vfs_fstat);
 
+int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
+{
+	int error = -EINVAL;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (flag & AT_SYMLINK_NOFOLLOW)
+		error = vfs_lstat_fd(dfd, filename, stat);
+	else
+		error = vfs_stat_fd(dfd, filename, stat);
+out:
+	return error;
+}
+
+EXPORT_SYMBOL(vfs_fstatat);
+
+
 #ifdef __ARCH_WANT_OLD_STAT
 
 /*
@@ -264,21 +282,12 @@ SYSCALL_DEFINE4(newfstatat, int, dfd, char __user *, filename,
 		struct stat __user *, statbuf, int, flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
-
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_new_stat(&stat, statbuf);
+	int error;
 
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_new_stat(&stat, statbuf);
 }
 #endif
 
@@ -404,21 +413,12 @@ SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename,
 		struct stat64 __user *, statbuf, int, flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
-
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_new_stat64(&stat, statbuf);
+	int error;
 
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_new_stat64(&stat, statbuf);
 }
 #endif /* __ARCH_WANT_STAT64 */
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e766be0d432..257f4d37ad2 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2302,6 +2302,7 @@ extern int vfs_lstat(char __user *, struct kstat *);
 extern int vfs_stat_fd(int dfd, char __user *, struct kstat *);
 extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *);
 extern int vfs_fstat(unsigned int, struct kstat *);
+extern int vfs_fstatat(int , char __user *, struct kstat *, int);
 
 extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		    unsigned long arg);
-- 
GitLab


From 2eae7a1874ca5be3232765d89e0250a449f1bc90 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Wed, 8 Apr 2009 16:34:03 -0400
Subject: [PATCH 0576/1421] kill vfs_stat_fd / vfs_lstat_fd

There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with
Oleg's vfs_fstatat.  Use vfs_fstatat for the few cases having the
directory fd, and switch all others to vfs_stat / vfs_lstat.

Reviewed-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/compat.c        |  18 ++++----
 fs/stat.c          | 105 ++++++++++++++++++---------------------------
 include/linux/fs.h |   2 -
 3 files changed, 52 insertions(+), 73 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index dda72e26709..379a399bf5c 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -181,22 +181,24 @@ asmlinkage long compat_sys_newstat(char __user * filename,
 		struct compat_stat __user *statbuf)
 {
 	struct kstat stat;
-	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_compat_stat(&stat, statbuf);
-	return error;
+	error = vfs_stat(filename, &stat);
+	if (error)
+		return error;
+	return cp_compat_stat(&stat, statbuf);
 }
 
 asmlinkage long compat_sys_newlstat(char __user * filename,
 		struct compat_stat __user *statbuf)
 {
 	struct kstat stat;
-	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_compat_stat(&stat, statbuf);
-	return error;
+	error = vfs_lstat(filename, &stat);
+	if (error)
+		return error;
+	return cp_compat_stat(&stat, statbuf);
 }
 
 #ifndef __ARCH_WANT_STAT64
diff --git a/fs/stat.c b/fs/stat.c
index 54711662b85..075694e31d8 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -55,46 +55,6 @@ int vfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
 
 EXPORT_SYMBOL(vfs_getattr);
 
-int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
-{
-	struct path path;
-	int error;
-
-	error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
-	if (!error) {
-		error = vfs_getattr(path.mnt, path.dentry, stat);
-		path_put(&path);
-	}
-	return error;
-}
-
-int vfs_stat(char __user *name, struct kstat *stat)
-{
-	return vfs_stat_fd(AT_FDCWD, name, stat);
-}
-
-EXPORT_SYMBOL(vfs_stat);
-
-int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
-{
-	struct path path;
-	int error;
-
-	error = user_path_at(dfd, name, 0, &path);
-	if (!error) {
-		error = vfs_getattr(path.mnt, path.dentry, stat);
-		path_put(&path);
-	}
-	return error;
-}
-
-int vfs_lstat(char __user *name, struct kstat *stat)
-{
-	return vfs_lstat_fd(AT_FDCWD, name, stat);
-}
-
-EXPORT_SYMBOL(vfs_lstat);
-
 int vfs_fstat(unsigned int fd, struct kstat *stat)
 {
 	struct file *f = fget(fd);
@@ -106,26 +66,43 @@ int vfs_fstat(unsigned int fd, struct kstat *stat)
 	}
 	return error;
 }
-
 EXPORT_SYMBOL(vfs_fstat);
 
 int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
 {
+	struct path path;
 	int error = -EINVAL;
+	int lookup_flags = 0;
 
 	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
 		goto out;
 
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, stat);
-	else
-		error = vfs_stat_fd(dfd, filename, stat);
+	if (!(flag & AT_SYMLINK_NOFOLLOW))
+		lookup_flags |= LOOKUP_FOLLOW;
+
+	error = user_path_at(dfd, filename, lookup_flags, &path);
+	if (error)
+		goto out;
+
+	error = vfs_getattr(path.mnt, path.dentry, stat);
+	path_put(&path);
 out:
 	return error;
 }
-
 EXPORT_SYMBOL(vfs_fstatat);
 
+int vfs_stat(char __user *name, struct kstat *stat)
+{
+	return vfs_fstatat(AT_FDCWD, name, stat, 0);
+}
+EXPORT_SYMBOL(vfs_stat);
+
+int vfs_lstat(char __user *name, struct kstat *stat)
+{
+	return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
+}
+EXPORT_SYMBOL(vfs_lstat);
+
 
 #ifdef __ARCH_WANT_OLD_STAT
 
@@ -173,23 +150,25 @@ static int cp_old_stat(struct kstat *stat, struct __old_kernel_stat __user * sta
 SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_old_stat(&stat, statbuf);
+	error = vfs_stat(filename, &stat);
+	if (error)
+		return error;
 
-	return error;
+	return cp_old_stat(&stat, statbuf);
 }
 
 SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_old_stat(&stat, statbuf);
+	error = vfs_lstat(filename, &stat);
+	if (error)
+		return error;
 
-	return error;
+	return cp_old_stat(&stat, statbuf);
 }
 
 SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
@@ -258,23 +237,23 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
-
-	if (!error)
-		error = cp_new_stat(&stat, statbuf);
+	int error = vfs_stat(filename, &stat);
 
-	return error;
+	if (error)
+		return error;
+	return cp_new_stat(&stat, statbuf);
 }
 
 SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_new_stat(&stat, statbuf);
+	error = vfs_lstat(filename, &stat);
+	if (error)
+		return error;
 
-	return error;
+	return cp_new_stat(&stat, statbuf);
 }
 
 #if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 257f4d37ad2..8f42b35a756 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2299,8 +2299,6 @@ extern int vfs_readdir(struct file *, filldir_t, void *);
 
 extern int vfs_stat(char __user *, struct kstat *);
 extern int vfs_lstat(char __user *, struct kstat *);
-extern int vfs_stat_fd(int dfd, char __user *, struct kstat *);
-extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *);
 extern int vfs_fstat(unsigned int, struct kstat *);
 extern int vfs_fstatat(int , char __user *, struct kstat *, int);
 
-- 
GitLab


From 38e23c95f92a84fb8505a9f572b8a209c9c372c1 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu, 9 Apr 2009 20:17:52 +0900
Subject: [PATCH 0577/1421] fs: Mark get_filesystem_list() as __init function.

"int get_filesystem_list(char * buf)" is called by only
"static void __init get_fs_names(char *page)".
We can mark get_filesystem_list() as "__init".

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/filesystems.c   | 2 +-
 include/linux/fs.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/filesystems.c b/fs/filesystems.c
index 1aa70260e6d..a24c58e181d 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -199,7 +199,7 @@ SYSCALL_DEFINE3(sysfs, int, option, unsigned long, arg1, unsigned long, arg2)
 	return retval;
 }
 
-int get_filesystem_list(char * buf)
+int __init get_filesystem_list(char *buf)
 {
 	int len = 0;
 	struct file_system_type * tmp;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8f42b35a756..5bed436f435 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2448,7 +2448,7 @@ struct ctl_table;
 int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
 		  void __user *buffer, size_t *lenp, loff_t *ppos);
 
-int get_filesystem_list(char * buf);
+int __init get_filesystem_list(char *buf);
 
 #endif /* __KERNEL__ */
 #endif /* _LINUX_FS_H */
-- 
GitLab


From be9208dff23af904655807672dd8235abf6ac039 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 20 Apr 2009 23:29:41 -0400
Subject: [PATCH 0578/1421] reiserfs: fix j_last_flush_trans_id type

Conversion in commit 600ed41675d8c384519d8f0b3c76afed39ef2f4b had missed
that one, but converted format from %lu to %u.  As the result,
/proc/..../journal got buggered on 64bit boxen.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/linux/reiserfs_fs_sb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 5621d87c447..6b361d23a49 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -193,7 +193,7 @@ struct reiserfs_journal {
 	atomic_t j_wcount;	/* count of writers for current commit */
 	unsigned long j_bcount;	/* batch count. allows turning X transactions into 1 */
 	unsigned long j_first_unflushed_offset;	/* first unflushed transactions offset */
-	unsigned long j_last_flush_trans_id;	/* last fully flushed journal timestamp */
+	unsigned j_last_flush_trans_id;	/* last fully flushed journal timestamp */
 	struct buffer_head *j_header_bh;
 
 	time_t j_trans_start_time;	/* time this transaction started */
-- 
GitLab


From 8531f1f14a85c004d5063a0a78c72d0b686ccb8e Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Mon, 20 Apr 2009 21:12:25 -0700
Subject: [PATCH 0579/1421] IB/mthca: Fix timeout for INIT_HCA and a few other
 commands

Commands INIT_HCA, CLOSE_HCA, SYS_EN, SYS_DIS, and CLOSE_IB all have 1
second timeouts.  For INIT_HCA this causes problems when had more than
2^18 are QPs configured, since the command takes more than 1 second to
complete.

All other commands have 60-second timeouts.  This patch makes the
above commands consistent with the rest of the commands (and with the
chip documentation).

This patch is an expansion of a patch from Arthur Kepner
<akepner@sgi.com> fixing just the INIT_HCA timeout.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mthca/mthca_cmd.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index c33e1c53c79..6d55f9d748f 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -157,13 +157,15 @@ enum {
 enum {
 	CMD_TIME_CLASS_A = (HZ + 999) / 1000 + 1,
 	CMD_TIME_CLASS_B = (HZ +  99) /  100 + 1,
-	CMD_TIME_CLASS_C = (HZ +   9) /   10 + 1
+	CMD_TIME_CLASS_C = (HZ +   9) /   10 + 1,
+	CMD_TIME_CLASS_D = 60 * HZ
 };
 #else
 enum {
 	CMD_TIME_CLASS_A = 60 * HZ,
 	CMD_TIME_CLASS_B = 60 * HZ,
-	CMD_TIME_CLASS_C = 60 * HZ
+	CMD_TIME_CLASS_C = 60 * HZ,
+	CMD_TIME_CLASS_D = 60 * HZ
 };
 #endif
 
@@ -598,7 +600,7 @@ int mthca_SYS_EN(struct mthca_dev *dev, u8 *status)
 	u64 out;
 	int ret;
 
-	ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, HZ, status);
+	ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D, status);
 
 	if (*status == MTHCA_CMD_STAT_DDR_MEM_ERR)
 		mthca_warn(dev, "SYS_EN DDR error: syn=%x, sock=%d, "
@@ -611,7 +613,7 @@ int mthca_SYS_EN(struct mthca_dev *dev, u8 *status)
 
 int mthca_SYS_DIS(struct mthca_dev *dev, u8 *status)
 {
-	return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, HZ, status);
+	return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, CMD_TIME_CLASS_C, status);
 }
 
 static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm,
@@ -1390,7 +1392,7 @@ int mthca_INIT_HCA(struct mthca_dev *dev,
 		MTHCA_PUT(inbox, param->uarc_base,   INIT_HCA_UAR_CTX_BASE_OFFSET);
 	}
 
-	err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, HZ, status);
+	err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, CMD_TIME_CLASS_D, status);
 
 	mthca_free_mailbox(dev, mailbox);
 	return err;
@@ -1450,12 +1452,12 @@ int mthca_INIT_IB(struct mthca_dev *dev,
 
 int mthca_CLOSE_IB(struct mthca_dev *dev, int port, u8 *status)
 {
-	return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, HZ, status);
+	return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, CMD_TIME_CLASS_A, status);
 }
 
 int mthca_CLOSE_HCA(struct mthca_dev *dev, int panic, u8 *status)
 {
-	return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, HZ, status);
+	return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, CMD_TIME_CLASS_C, status);
 }
 
 int mthca_SET_IB(struct mthca_dev *dev, struct mthca_set_ib_param *param,
-- 
GitLab


From 88bea188b85f9cefefbbd56b8a48d0f798409177 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 21 Apr 2009 00:35:47 -0400
Subject: [PATCH 0580/1421] ACPI: add /sys/firmware/acpi/interrupts/sci_not
 counter

This counter may prove useful in debugging some
spurious interrupt issues seen in the field.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 Documentation/ABI/testing/sysfs-firmware-acpi |  8 ++++++--
 drivers/acpi/osl.c                            |  4 +++-
 drivers/acpi/system.c                         | 11 +++++++++--
 include/linux/acpi.h                          |  1 +
 4 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index e8ffc70ffe1..4f9ba3c2fca 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -69,9 +69,13 @@ Description:
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
+		sci_not:     0	
 
-		sci - The total number of times the ACPI SCI
-		has claimed an interrupt.
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.
 
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index d59f08ecaf1..d916bea729f 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -353,8 +353,10 @@ static irqreturn_t acpi_irq(int irq, void *dev_id)
 	if (handled) {
 		acpi_irq_handled++;
 		return IRQ_HANDLED;
-	} else
+	} else {
+		acpi_irq_not_handled++;
 		return IRQ_NONE;
+	}
 }
 
 acpi_status
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index da51f05ef8d..0944daec064 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -38,6 +38,7 @@ ACPI_MODULE_NAME("system");
 #define ACPI_SYSTEM_DEVICE_NAME		"System"
 
 u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
 
 /*
  * Make ACPICA version work as module param
@@ -214,8 +215,9 @@ err:
 
 #define COUNT_GPE 0
 #define COUNT_SCI 1	/* acpi_irq_handled */
-#define COUNT_ERROR 2	/* other */
-#define NUM_COUNTERS_EXTRA 3
+#define COUNT_SCI_NOT 2	/* acpi_irq_not_handled */
+#define COUNT_ERROR 3	/* other */
+#define NUM_COUNTERS_EXTRA 4
 
 struct event_counter {
 	u32 count;
@@ -317,6 +319,8 @@ static ssize_t counter_show(struct kobject *kobj,
 
 	all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
 		acpi_irq_handled;
+	all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+		acpi_irq_not_handled;
 	all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
 		acpi_gpe_count;
 
@@ -363,6 +367,7 @@ static ssize_t counter_set(struct kobject *kobj,
 			all_counters[i].count = 0;
 		acpi_gpe_count = 0;
 		acpi_irq_handled = 0;
+		acpi_irq_not_handled = 0;
 		goto end;
 	}
 
@@ -456,6 +461,8 @@ void acpi_irq_stats_init(void)
 			sprintf(buffer, "gpe_all");
 		else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
 			sprintf(buffer, "sci");
+		else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+			sprintf(buffer, "sci_not");
 		else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
 			sprintf(buffer, "error");
 		else
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 6586cbd0d4a..88be890ee3c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -111,6 +111,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
 int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
 void acpi_irq_stats_init(void);
 extern u32 acpi_irq_handled;
+extern u32 acpi_irq_not_handled;
 
 extern struct acpi_mcfg_allocation *pci_mmcfg_config;
 extern int pci_mmcfg_config_num;
-- 
GitLab


From cfbf1eecd70db9a7a49c42a0613c00f7a2a86dfb Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 20 Apr 2009 22:54:25 +0200
Subject: [PATCH 0581/1421] ALSA: AOA: Convert onyx and tas codecs to new-style
 i2c drivers

The legacy i2c binding model is going away soon, so convert the AOA
codec drivers to the new model or they'll break.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/aoa/codecs/onyx.c | 76 ++++++++++++++++++++++++++++-------------
 sound/aoa/codecs/tas.c  | 66 ++++++++++++++++++++++-------------
 2 files changed, 95 insertions(+), 47 deletions(-)

diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index 15500b9d2da..84bb07d39a7 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -47,7 +47,7 @@ MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
 struct onyx {
 	/* cache registers 65 to 80, they are write-only! */
 	u8			cache[16];
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	struct aoa_codec	codec;
 	u32			initialised:1,
 				spdif_locked:1,
@@ -72,7 +72,7 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
 		*value = onyx->cache[reg-FIRSTREGISTER];
 		return 0;
 	}
-	v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
 	if (v < 0)
 		return -1;
 	*value = (u8)v;
@@ -84,7 +84,7 @@ static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value)
 {
 	int result;
 
-	result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+	result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
 	if (!result)
 		onyx->cache[reg-FIRSTREGISTER] = value;
 	return result;
@@ -996,12 +996,45 @@ static void onyx_exit_codec(struct aoa_codec *codec)
 	onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
 }
 
-static struct i2c_driver onyx_driver;
-
 static int onyx_create(struct i2c_adapter *adapter,
 		       struct device_node *node,
 		       int addr)
 {
+	struct i2c_board_info info;
+	struct i2c_client *client;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
+	info.addr = addr;
+	info.platform_data = node;
+	client = i2c_new_device(adapter, &info);
+	if (!client)
+		return -ENODEV;
+
+	/*
+	 * We know the driver is already loaded, so the device should be
+	 * already bound. If not it means binding failed, which suggests
+	 * the device doesn't really exist and should be deleted.
+	 * Ideally this would be replaced by better checks _before_
+	 * instantiating the device.
+	 */
+	if (!client->driver) {
+		i2c_unregister_device(client);
+		return -ENODEV;
+	}
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return 0;
+}
+
+static int onyx_i2c_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct device_node *node = client->dev.platform_data;
 	struct onyx *onyx;
 	u8 dummy;
 
@@ -1011,20 +1044,12 @@ static int onyx_create(struct i2c_adapter *adapter,
 		return -ENOMEM;
 
 	mutex_init(&onyx->mutex);
-	onyx->i2c.driver = &onyx_driver;
-	onyx->i2c.adapter = adapter;
-	onyx->i2c.addr = addr & 0x7f;
-	strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
-
-	if (i2c_attach_client(&onyx->i2c)) {
-		printk(KERN_ERR PFX "failed to attach to i2c\n");
-		goto fail;
-	}
+	onyx->i2c = client;
+	i2c_set_clientdata(client, onyx);
 
 	/* we try to read from register ONYX_REG_CONTROL
 	 * to check if the codec is present */
 	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
-		i2c_detach_client(&onyx->i2c);
 		printk(KERN_ERR PFX "failed to read control register\n");
 		goto fail;
 	}
@@ -1036,14 +1061,14 @@ static int onyx_create(struct i2c_adapter *adapter,
 	onyx->codec.node = of_node_get(node);
 
 	if (aoa_codec_register(&onyx->codec)) {
-		i2c_detach_client(&onyx->i2c);
 		goto fail;
 	}
 	printk(KERN_DEBUG PFX "created and attached onyx instance\n");
 	return 0;
  fail:
+	i2c_set_clientdata(client, NULL);
 	kfree(onyx);
-	return -EINVAL;
+	return -ENODEV;
 }
 
 static int onyx_i2c_attach(struct i2c_adapter *adapter)
@@ -1080,28 +1105,33 @@ static int onyx_i2c_attach(struct i2c_adapter *adapter)
 	return onyx_create(adapter, NULL, 0x47);
 }
 
-static int onyx_i2c_detach(struct i2c_client *client)
+static int onyx_i2c_remove(struct i2c_client *client)
 {
-	struct onyx *onyx = container_of(client, struct onyx, i2c);
-	int err;
+	struct onyx *onyx = i2c_get_clientdata(client);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
 	aoa_codec_unregister(&onyx->codec);
 	of_node_put(onyx->codec.node);
 	if (onyx->codec_info)
 		kfree(onyx->codec_info);
+	i2c_set_clientdata(client, onyx);
 	kfree(onyx);
 	return 0;
 }
 
+static const struct i2c_device_id onyx_i2c_id[] = {
+	{ "aoa_codec_onyx", 0 },
+	{ }
+};
+
 static struct i2c_driver onyx_driver = {
 	.driver = {
 		.name = "aoa_codec_onyx",
 		.owner = THIS_MODULE,
 	},
 	.attach_adapter = onyx_i2c_attach,
-	.detach_client = onyx_i2c_detach,
+	.probe = onyx_i2c_probe,
+	.remove = onyx_i2c_remove,
+	.id_table = onyx_i2c_id,
 };
 
 static int __init onyx_init(void)
diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c
index 008e0f85097..f0ebc971c68 100644
--- a/sound/aoa/codecs/tas.c
+++ b/sound/aoa/codecs/tas.c
@@ -82,7 +82,7 @@ MODULE_DESCRIPTION("tas codec driver for snd-aoa");
 
 struct tas {
 	struct aoa_codec	codec;
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	u32			mute_l:1, mute_r:1 ,
 				controls_created:1 ,
 				drc_enabled:1,
@@ -108,9 +108,9 @@ static struct tas *codec_to_tas(struct aoa_codec *codec)
 static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
 {
 	if (len == 1)
-		return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
+		return i2c_smbus_write_byte_data(tas->i2c, reg, *data);
 	else
-		return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
+		return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data);
 }
 
 static void tas3004_set_drc(struct tas *tas)
@@ -882,12 +882,34 @@ static void tas_exit_codec(struct aoa_codec *codec)
 }
 
 
-static struct i2c_driver tas_driver;
-
 static int tas_create(struct i2c_adapter *adapter,
 		       struct device_node *node,
 		       int addr)
 {
+	struct i2c_board_info info;
+	struct i2c_client *client;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
+	info.addr = addr;
+	info.platform_data = node;
+
+	client = i2c_new_device(adapter, &info);
+	if (!client)
+		return -ENODEV;
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return 0;
+}
+
+static int tas_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device_node *node = client->dev.platform_data;
 	struct tas *tas;
 
 	tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
@@ -896,17 +918,11 @@ static int tas_create(struct i2c_adapter *adapter,
 		return -ENOMEM;
 
 	mutex_init(&tas->mtx);
-	tas->i2c.driver = &tas_driver;
-	tas->i2c.adapter = adapter;
-	tas->i2c.addr = addr;
+	tas->i2c = client;
+	i2c_set_clientdata(client, tas);
+
 	/* seems that half is a saner default */
 	tas->drc_range = TAS3004_DRC_MAX / 2;
-	strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
-
-	if (i2c_attach_client(&tas->i2c)) {
-		printk(KERN_ERR PFX "failed to attach to i2c\n");
-		goto fail;
-	}
 
 	strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
 	tas->codec.owner = THIS_MODULE;
@@ -915,14 +931,12 @@ static int tas_create(struct i2c_adapter *adapter,
 	tas->codec.node = of_node_get(node);
 
 	if (aoa_codec_register(&tas->codec)) {
-		goto detach;
+		goto fail;
 	}
 	printk(KERN_DEBUG
 	       "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
-	       addr, node->full_name);
+	       (unsigned int)client->addr, node->full_name);
 	return 0;
- detach:
-	i2c_detach_client(&tas->i2c);
  fail:
 	mutex_destroy(&tas->mtx);
 	kfree(tas);
@@ -970,14 +984,11 @@ static int tas_i2c_attach(struct i2c_adapter *adapter)
 	return -ENODEV;
 }
 
-static int tas_i2c_detach(struct i2c_client *client)
+static int tas_i2c_remove(struct i2c_client *client)
 {
-	struct tas *tas = container_of(client, struct tas, i2c);
-	int err;
+	struct tas *tas = i2c_get_clientdata(client);
 	u8 tmp = TAS_ACR_ANALOG_PDOWN;
 
-	if ((err = i2c_detach_client(client)))
-		return err;
 	aoa_codec_unregister(&tas->codec);
 	of_node_put(tas->codec.node);
 
@@ -989,13 +1000,20 @@ static int tas_i2c_detach(struct i2c_client *client)
 	return 0;
 }
 
+static const struct i2c_device_id tas_i2c_id[] = {
+	{ "aoa_codec_tas", 0 },
+	{ }
+};
+
 static struct i2c_driver tas_driver = {
 	.driver = {
 		.name = "aoa_codec_tas",
 		.owner = THIS_MODULE,
 	},
 	.attach_adapter = tas_i2c_attach,
-	.detach_client = tas_i2c_detach,
+	.probe = tas_i2c_probe,
+	.remove = tas_i2c_remove,
+	.id_table = tas_i2c_id,
 };
 
 static int __init tas_init(void)
-- 
GitLab


From 5de4155bb3760fc13a172c5cef2368ce218ebe1c Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 20 Apr 2009 22:56:59 +0200
Subject: [PATCH 0582/1421] ALSA: keywest: Convert to new-style i2c driver

The legacy i2c binding model is going away soon, so convert the ppc
keywest sound driver to the new model or it will break.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/ppc/keywest.c | 82 ++++++++++++++++++++++-----------------------
 1 file changed, 41 insertions(+), 41 deletions(-)

diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 6ff99ed7751..a5afb2682e7 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -33,26 +33,25 @@
 static struct pmac_keywest *keywest_ctx;
 
 
-static int keywest_attach_adapter(struct i2c_adapter *adapter);
-static int keywest_detach_client(struct i2c_client *client);
-
-struct i2c_driver keywest_driver = {  
-	.driver = {
-		.name = "PMac Keywest Audio",
-	},
-	.attach_adapter = &keywest_attach_adapter,
-	.detach_client = &keywest_detach_client,
-};
-
-
 #ifndef i2c_device_name
 #define i2c_device_name(x)	((x)->name)
 #endif
 
+static int keywest_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	i2c_set_clientdata(client, keywest_ctx);
+	return 0;
+}
+
+/*
+ * This is kind of a hack, best would be to turn powermac to fixed i2c
+ * bus numbers and declare the sound device as part of platform
+ * initialization
+ */
 static int keywest_attach_adapter(struct i2c_adapter *adapter)
 {
-	int err;
-	struct i2c_client *new_client;
+	struct i2c_board_info info;
 
 	if (! keywest_ctx)
 		return -EINVAL;
@@ -60,46 +59,47 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter)
 	if (strncmp(i2c_device_name(adapter), "mac-io", 6))
 		return 0; /* ignored */
 
-	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (! new_client)
-		return -ENOMEM;
-
-	new_client->addr = keywest_ctx->addr;
-	i2c_set_clientdata(new_client, keywest_ctx);
-	new_client->adapter = adapter;
-	new_client->driver = &keywest_driver;
-	new_client->flags = 0;
-
-	strcpy(i2c_device_name(new_client), keywest_ctx->name);
-	keywest_ctx->client = new_client;
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "keywest", I2C_NAME_SIZE);
+	info.addr = keywest_ctx->addr;
+	keywest_ctx->client = i2c_new_device(adapter, &info);
 	
-	/* Tell the i2c layer a new client has arrived */
-	if (i2c_attach_client(new_client)) {
-		snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n");
-		err = -ENODEV;
-		goto __err;
-	}
-
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&keywest_ctx->client->detected,
+		      &keywest_ctx->client->driver->clients);
 	return 0;
-
- __err:
-	kfree(new_client);
-	keywest_ctx->client = NULL;
-	return err;
 }
 
-static int keywest_detach_client(struct i2c_client *client)
+static int keywest_remove(struct i2c_client *client)
 {
+	i2c_set_clientdata(client, NULL);
 	if (! keywest_ctx)
 		return 0;
 	if (client == keywest_ctx->client)
 		keywest_ctx->client = NULL;
 
-	i2c_detach_client(client);
-	kfree(client);
 	return 0;
 }
 
+
+static const struct i2c_device_id keywest_i2c_id[] = {
+	{ "keywest", 0 },
+	{ }
+};
+
+struct i2c_driver keywest_driver = {
+	.driver = {
+		.name = "PMac Keywest Audio",
+	},
+	.attach_adapter = keywest_attach_adapter,
+	.probe = keywest_probe,
+	.remove = keywest_remove,
+	.id_table = keywest_i2c_id,
+};
+
 /* exported */
 void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
 {
-- 
GitLab


From bb023080fe72f1f80648e9b60771d9a94ce75aca Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Tue, 21 Apr 2009 07:35:25 +0200
Subject: [PATCH 0583/1421] ALSA: hda - Fix alc662_init_verbs

Don't unmute unneeded amps for input mixers of ALC662 & co.
It caused possible recording noises.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6ed787eedd0..78bea2c6ab6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -15641,14 +15641,7 @@ static struct hda_verb alc662_init_verbs[] = {
 	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
 	/* Input mixer */
 	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
 	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
 
 	/* always trun on EAPD */
 	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
-- 
GitLab


From 622e84cdff719b9dcd3f495ddb0afb54995799cc Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Tue, 21 Apr 2009 07:39:04 +0200
Subject: [PATCH 0584/1421] ALSA: hda - Add quirks for Realtek codecs

- Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269
- Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A
  for ALC663
- Support DELL ZM1 for ALC272

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 98 +++++++++++++++++++++++++++++++++++
 1 file changed, 98 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 78bea2c6ab6..c9300a3427e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -188,6 +188,8 @@ enum {
 	ALC663_ASUS_MODE4,
 	ALC663_ASUS_MODE5,
 	ALC663_ASUS_MODE6,
+	ALC272_DELL,
+	ALC272_DELL_ZM1,
 	ALC662_AUTO,
 	ALC662_MODEL_LAST,
 };
@@ -12976,10 +12978,17 @@ static struct snd_pci_quirk alc269_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
 	SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
 		      ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
 		      ALC269_ASUS_EEEPC_P901),
 	SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
 		      ALC269_ASUS_EEEPC_P901),
+        SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901),
 	SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
 	SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
 	{}
@@ -15210,12 +15219,23 @@ static hda_nid_t alc662_dac_nids[4] = {
 	0x02, 0x03, 0x04
 };
 
+static hda_nid_t alc272_dac_nids[2] = {
+	0x02, 0x03
+};
+
 static hda_nid_t alc662_adc_nids[1] = {
 	/* ADC1-2 */
 	0x09,
 };
 
+static hda_nid_t alc272_adc_nids[1] = {
+	/* ADC1-2 */
+	0x08,
+};
+
 static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
+
 
 /* input MUX */
 /* FIXME: should be a matrix-type input source selection */
@@ -15836,12 +15856,48 @@ static struct hda_verb alc662_ecs_init_verbs[] = {
 	{}
 };
 
+static struct hda_verb alc272_dell_zm1_init_verbs[] = {
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x21, AC_VERB_SET_CONNECT_SEL, 0x01},	/* Headphone */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
+static struct hda_verb alc272_dell_init_verbs[] = {
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x21, AC_VERB_SET_CONNECT_SEL, 0x01},	/* Headphone */
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
 static struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
 	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc272_auto_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
 static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -16353,6 +16409,8 @@ static const char *alc662_models[ALC662_MODEL_LAST] = {
 
 static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
+	SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL),
+	SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
 	SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
 	SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
@@ -16365,26 +16423,36 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
 	SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
 	SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA),
+	SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
 	SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
 	SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
 	/*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
 	SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
 	SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
 	/*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
 	SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA),
 	SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
 	SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
@@ -16633,6 +16701,36 @@ static struct alc_config_preset alc662_presets[] = {
 		.unsol_event = alc663_mode6_unsol_event,
 		.init_hook = alc663_mode6_inithook,
 	},
+	[ALC272_DELL] = {
+		.mixers = { alc663_m51va_mixer },
+		.cap_mixer = alc272_auto_capture_mixer,
+		.init_verbs = { alc662_init_verbs, alc272_dell_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc662_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.adc_nids = alc272_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
+		.capsrc_nids = alc272_capsrc_nids,
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc663_m51va_capture_source,
+		.unsol_event = alc663_m51va_unsol_event,
+		.init_hook = alc663_m51va_inithook,
+	},
+	[ALC272_DELL_ZM1] = {
+		.mixers = { alc663_m51va_mixer },
+		.cap_mixer = alc662_auto_capture_mixer,
+		.init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc662_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.adc_nids = alc662_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+		.capsrc_nids = alc662_capsrc_nids,
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc663_m51va_capture_source,
+		.unsol_event = alc663_m51va_unsol_event,
+		.init_hook = alc663_m51va_inithook,
+	},
 };
 
 
-- 
GitLab


From 2f537a9f8e82f55c241b002c8cfbf34303b45ada Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 21 Apr 2009 16:00:15 +0930
Subject: [PATCH 0585/1421] x86: fix boot crash in NMI watchdog with
 CONFIG_CPUMASK_OFFSTACK=y and flat APIC

fcef8576d8a64fc603e719c97d423f9f6d4e0e8b converted backtrace_mask to a
cpumask_var_t, and assumed check_nmi_watchdog was called before
nmi_watchdog_tick was ever called.  Steven's oops shows I was wrong.

This is something of a bandaid: I'm not sure we *should* be calling
nmi_watchdog_tick before check_nmi_watchdog.  Note that gcc eliminates
this test for the CONFIG_CPUMASK_OFFSTACK=n case.

[ Impact: fix boot crash in rare configs ]

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <alpine.DEB.2.00.0904202113520.10097@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/nmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index d6bd6240715..2ba52f35a88 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -414,7 +414,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		touched = 1;
 	}
 
-	if (cpumask_test_cpu(cpu, backtrace_mask)) {
+	/* We can be called before check_nmi_watchdog, hence NULL check. */
+	if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
-- 
GitLab


From fcc5c4a2feea3886dc058498b28508b2731720d5 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 21 Apr 2009 16:03:41 +0930
Subject: [PATCH 0586/1421] x86: avoid theoretical spurious NMI backtraces with
 CONFIG_CPUMASK_OFFSTACK=y

In theory (though not shown in practice) alloc_cpumask_var() doesn't zero
memory, so CPUs might print an "NMI backtrace for cpu %d" once on boot.

(Bug introduced in fcef8576d8a64fc603e719c97d423f9f6d4e0e8b).

[ Impact: avoid theoretical syslog noise in rare configs ]

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <alpine.DEB.2.00.0904202113520.10097@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/nmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 2ba52f35a88..ce4fbfa315a 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -138,7 +138,7 @@ int __init check_nmi_watchdog(void)
 	if (!prev_nmi_count)
 		goto error;
 
-	alloc_cpumask_var(&backtrace_mask, GFP_KERNEL);
+	alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
 #ifdef CONFIG_SMP
-- 
GitLab


From 66ab3a74c5ce737effc2c64391e036b0938b1c36 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 21 Apr 2009 11:44:57 +0200
Subject: [PATCH 0587/1421] CRIS: Merge machine dependent boot/compressed and
 boot/rescue

Merge the machine dependent boot directories for v10 and v32.
This avoids some code duplication and eases the way for further
merging later on.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/Makefile                            |  14 +-
 arch/cris/arch-v10/boot/compressed/README     |  25 --
 arch/cris/arch-v10/boot/compressed/misc.c     | 246 ------------------
 arch/cris/arch-v32/boot/Makefile              |  20 --
 arch/cris/arch-v32/boot/compressed/Makefile   |  26 --
 arch/cris/arch-v32/boot/rescue/Makefile       |  26 --
 arch/cris/{arch-v10 => }/boot/.gitignore      |   0
 arch/cris/{arch-v10 => }/boot/Makefile        |   8 +-
 .../{arch-v10 => }/boot/compressed/Makefile   |  19 +-
 .../{arch-v32 => }/boot/compressed/README     |   0
 .../compressed/decompress_v10.lds}            |   0
 .../compressed/decompress_v32.lds}            |   0
 .../head.S => boot/compressed/head_v10.S}     |   4 +-
 .../head.S => boot/compressed/head_v32.S}     |  10 +-
 .../{arch-v32 => }/boot/compressed/misc.c     | 193 +++++++++-----
 arch/cris/{arch-v10 => }/boot/rescue/Makefile |  22 +-
 .../rescue/head.S => boot/rescue/head_v10.S}  |   2 +-
 .../rescue/head.S => boot/rescue/head_v32.S}  |   0
 .../{arch-v10 => }/boot/rescue/kimagerescue.S |   0
 .../rescue.lds => boot/rescue/rescue_v10.lds} |   0
 .../rescue.lds => boot/rescue/rescue_v32.lds} |   0
 .../{arch-v10 => }/boot/rescue/testrescue.S   |   0
 arch/cris/{arch-v10 => }/boot/tools/build.c   |   0
 23 files changed, 186 insertions(+), 429 deletions(-)
 delete mode 100644 arch/cris/arch-v10/boot/compressed/README
 delete mode 100644 arch/cris/arch-v10/boot/compressed/misc.c
 delete mode 100644 arch/cris/arch-v32/boot/Makefile
 delete mode 100644 arch/cris/arch-v32/boot/compressed/Makefile
 delete mode 100644 arch/cris/arch-v32/boot/rescue/Makefile
 rename arch/cris/{arch-v10 => }/boot/.gitignore (100%)
 rename arch/cris/{arch-v10 => }/boot/Makefile (65%)
 rename arch/cris/{arch-v10 => }/boot/compressed/Makefile (50%)
 rename arch/cris/{arch-v32 => }/boot/compressed/README (100%)
 rename arch/cris/{arch-v10/boot/compressed/decompress.lds => boot/compressed/decompress_v10.lds} (100%)
 rename arch/cris/{arch-v32/boot/compressed/decompress.lds => boot/compressed/decompress_v32.lds} (100%)
 rename arch/cris/{arch-v10/boot/compressed/head.S => boot/compressed/head_v10.S} (97%)
 rename arch/cris/{arch-v32/boot/compressed/head.S => boot/compressed/head_v32.S} (94%)
 rename arch/cris/{arch-v32 => }/boot/compressed/misc.c (65%)
 rename arch/cris/{arch-v10 => }/boot/rescue/Makefile (63%)
 rename arch/cris/{arch-v10/boot/rescue/head.S => boot/rescue/head_v10.S} (99%)
 rename arch/cris/{arch-v32/boot/rescue/head.S => boot/rescue/head_v32.S} (100%)
 rename arch/cris/{arch-v10 => }/boot/rescue/kimagerescue.S (100%)
 rename arch/cris/{arch-v10/boot/rescue/rescue.lds => boot/rescue/rescue_v10.lds} (100%)
 rename arch/cris/{arch-v32/boot/rescue/rescue.lds => boot/rescue/rescue_v32.lds} (100%)
 rename arch/cris/{arch-v10 => }/boot/rescue/testrescue.S (100%)
 rename arch/cris/{arch-v10 => }/boot/tools/build.c (100%)

diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 3662cfb7b61..71e17d3eedd 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=
diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README
deleted file mode 100644
index 48b3db9924b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/README
+++ /dev/null
@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and 
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img. 
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
deleted file mode 100644
index a4db1507d3b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n)     memset((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { \
-		if (!(cond)) \
-			error(msg); \
-	} while (0)
-#  define Trace(x) fprintf x
-#  define Tracev(x) do { \
-		if (verbose) \
-			fprintf x; \
-	} while (0)
-#  define Tracevv(x) do { \
-		if (verbose > 1) \
-			fprintf x; \
-	} while (0)
-#  define Tracec(c, x) do { \
-		if (verbose && (c)) \
-			fprintf x; \
-	} while (0)
-#  define Tracecv(c, x) do { \
-		if (verbose > 1 && (c)) \
-			fprintf x; \
-	} while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
-		*R_SERIAL3_TR_DATA = *s++;
-#endif
-	}
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out = *in;
-		out++;
-		in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
-
-	while (1);	/* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
-	char revision;
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	*R_SERIAL0_XOFF = 0;
-	*R_SERIAL0_BAUD = 0x99;
-	*R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	*R_SERIAL1_XOFF = 0;
-	*R_SERIAL1_BAUD = 0x99;
-	*R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	*R_GEN_CONFIG = 0x08;
-	*R_SERIAL2_XOFF = 0;
-	*R_SERIAL2_BAUD = 0x99;
-	*R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	*R_GEN_CONFIG = 0x100;
-	*R_SERIAL3_XOFF = 0;
-	*R_SERIAL3_BAUD = 0x99;
-	*R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 10) {
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while (1);
-	}
-
-	puts("Uncompressing Linux...\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\n");
-}
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
deleted file mode 100644
index 99896ad60b3..00000000000
--- a/arch/cris/arch-v32/boot/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
deleted file mode 100644
index e176b8b69d9..00000000000
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
deleted file mode 100644
index 566aac663a3..00000000000
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-		-I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD      $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)
diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/boot/.gitignore
similarity index 100%
rename from arch/cris/arch-v10/boot/.gitignore
rename to arch/cris/boot/.gitignore
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/boot/Makefile
similarity index 65%
rename from arch/cris/arch-v10/boot/Makefile
rename to arch/cris/boot/Makefile
index 21720301443..144f3afa011 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/boot/Makefile
@@ -1,8 +1,12 @@
 #
-# arch/cris/arch-v10/boot/Makefile
+# arch/cris/boot/Makefile
 #
 
-OBJCOPYFLAGS = -O binary --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
 
 subdir- := compressed rescue
 targets := Image
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/boot/compressed/Makefile
similarity index 50%
rename from arch/cris/arch-v10/boot/compressed/Makefile
rename to arch/cris/boot/compressed/Makefile
index 6fe0ffaf3be..8fe9338c177 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/boot/compressed/Makefile
@@ -1,11 +1,23 @@
 #
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
 #
 
 asflags-y += $(LINUXINCLUDE)
 ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# 				    -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# 					-I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 
 $(obj)/piggy.gz: $(obj)/../Image FORCE
 	$(call if_changed,gzip)
-
diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/boot/compressed/README
similarity index 100%
rename from arch/cris/arch-v32/boot/compressed/README
rename to arch/cris/boot/compressed/README
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.lds b/arch/cris/boot/compressed/decompress_v10.lds
similarity index 100%
rename from arch/cris/arch-v10/boot/compressed/decompress.lds
rename to arch/cris/boot/compressed/decompress_v10.lds
diff --git a/arch/cris/arch-v32/boot/compressed/decompress.lds b/arch/cris/boot/compressed/decompress_v32.lds
similarity index 100%
rename from arch/cris/arch-v32/boot/compressed/decompress.lds
rename to arch/cris/boot/compressed/decompress_v32.lds
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/boot/compressed/head_v10.S
similarity index 97%
rename from arch/cris/arch-v10/boot/compressed/head.S
rename to arch/cris/boot/compressed/head_v10.S
index 0bb4dcc2925..9edb8ade7e1 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/boot/compressed/head_v10.S
@@ -30,7 +30,7 @@
 	beq	dram_init_finished
 	nop
 
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
 
 dram_init_finished:
 
@@ -123,4 +123,4 @@ _cmd_line_magic:
 	.dword 0
 _cmd_line_addr:
 	.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"
diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/boot/compressed/head_v32.S
similarity index 94%
rename from arch/cris/arch-v32/boot/compressed/head.S
rename to arch/cris/boot/compressed/head_v32.S
index a4a65c5c669..f483005f3d4 100644
--- a/arch/cris/arch-v32/boot/compressed/head.S
+++ b/arch/cris/boot/compressed/head_v32.S
@@ -17,7 +17,7 @@
 	.globl	input_data
 
 	.text
-_start:
+start:
 	di
 
 	;; Start clocks for used blocks.
@@ -29,9 +29,9 @@ _start:
 	nop
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif
@@ -137,9 +137,9 @@ _boot_source:
 	.dword 0
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
similarity index 65%
rename from arch/cris/arch-v32/boot/compressed/misc.c
rename to arch/cris/boot/compressed/misc.c
index 3595e16e82b..47bc190ba6d 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/boot/compressed/misc.c
@@ -18,8 +18,9 @@
 
 #define KERNEL_LOAD_ADR 0x40004000
 
-
 #include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/reg_map.h>
 #include <hwregs/ser_defs.h>
@@ -27,6 +28,9 @@
 #ifdef CONFIG_CRIS_MACH_ARTPEC3
 #include <hwregs/clkgen_defs.h>
 #endif
+#else
+#include <arch/svinto.h>
+#endif
 
 /*
  * gzip declarations
@@ -35,12 +39,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -68,27 +70,43 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
 
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
 static void flush_window(void);
 static void error(char *m);
+static void puts(const char *);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -96,10 +114,6 @@ static long bytes_out;
 static uch *output_data;
 static unsigned long output_ptr;
 
-static void error(char *m);
-
-static void puts(const char *);
-
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
 
 /* decompressor info and error messages to serial console */
 
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
 {
 	reg_ser_rs_stat_din rs;
 	reg_ser_rw_dout dout = {.data = *s};
@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#endif
 
-static void
-puts(const char *s)
+static void puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser0);
+#else
+		while (!(*R_SERIAL0_STATUS & (1 << 5)))
+			;
+		*R_SERIAL0_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser1);
+#else
+		while (!(*R_SERIAL1_STATUS & (1 << 5)))
+			;
+		*R_SERIAL1_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser2);
+#else
+		while (!(*R_SERIAL2_STATUS & (1 << 5)))
+			;
+		*R_SERIAL2_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser3);
+#else
+		while (!(*R_SERIAL3_STATUS & (1 << 5)))
+			;
+		*R_SERIAL3_TR_DATA = *s++;
+#endif
 #endif
 		*s++;
 	}
@@ -147,8 +185,7 @@ puts(const char *s)
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
 	char *ss = (char*)s;
@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
 	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
 
 	return __dest;
 }
@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
-	puts("\r\n\n");
+	puts("\n\n");
 	puts(x);
-	puts("\r\n\n -- System halted\n");
+	puts("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
 {
 	reg_ser_rw_xoff xoff;
 	reg_ser_rw_tr_ctrl tr_ctrl;
@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
 	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
 	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
 }
+#endif
 
-void
-decompress_kernel(void)
+void decompress_kernel(void)
 {
 	char revision;
+	char compile_rev;
 
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
     defined(CONFIG_ETRAX_DEBUG_PORT2) || \
     defined(CONFIG_ETRAX_DEBUG_PORT3)
@@ -277,6 +316,7 @@ decompress_kernel(void)
 	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
 #endif
 
+
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
 	serial_setup(regi_ser0);
 #endif
@@ -300,19 +340,52 @@ decompress_kernel(void)
 
 	/* input_data is set in head.S */
 	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
 
 	setup_normal_output_buffer();
 
 	makecrc();
 
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 32)
-	{
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\r\n");
+	puts("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel.\r\n");
+	puts("Done. Now booting the kernel\n");
 }
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile
similarity index 63%
rename from arch/cris/arch-v10/boot/rescue/Makefile
rename to arch/cris/boot/rescue/Makefile
index 82ab59b968e..52bd0bd1dd2 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/boot/rescue/Makefile
@@ -2,16 +2,26 @@
 # Makefile for rescue (bootstrap) code
 #
 
-ccflags-y += -O2 $(LINUXINCLUDE)
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# 				    -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
 asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
 OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
 
 targets := rescue.o rescue.bin
 
-$(obj)/rescue.o: $(OBJECT) FORCE
+$(obj)/rescue.o: $(OBJECTS) FORCE
 	$(call if_changed,ld)
 
 $(obj)/rescue.bin: $(obj)/rescue.o FORCE
@@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
 	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
 	rm tr.bin tmp2423 testrescue_tmp.bin
 
+
 $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
 # Pad it to 784 bytes, that's what the rescue loader expects
@@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
 	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
 	rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/boot/rescue/head_v10.S
similarity index 99%
rename from arch/cris/arch-v10/boot/rescue/head.S
rename to arch/cris/boot/rescue/head_v10.S
index fb503d1eeea..2fafe247a25 100644
--- a/arch/cris/arch-v10/boot/rescue/head.S
+++ b/arch/cris/boot/rescue/head_v10.S
@@ -155,7 +155,7 @@ no_newjump:
 #endif
 
 	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
+#include "../../../arch-v10/lib/dram_init.S"
 
 	;; we now should go through the checksum-table and check the listed
 	;; partitions for errors.
diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/boot/rescue/head_v32.S
similarity index 100%
rename from arch/cris/arch-v32/boot/rescue/head.S
rename to arch/cris/boot/rescue/head_v32.S
diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S
similarity index 100%
rename from arch/cris/arch-v10/boot/rescue/kimagerescue.S
rename to arch/cris/boot/rescue/kimagerescue.S
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.lds b/arch/cris/boot/rescue/rescue_v10.lds
similarity index 100%
rename from arch/cris/arch-v10/boot/rescue/rescue.lds
rename to arch/cris/boot/rescue/rescue_v10.lds
diff --git a/arch/cris/arch-v32/boot/rescue/rescue.lds b/arch/cris/boot/rescue/rescue_v32.lds
similarity index 100%
rename from arch/cris/arch-v32/boot/rescue/rescue.lds
rename to arch/cris/boot/rescue/rescue_v32.lds
diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/boot/rescue/testrescue.S
similarity index 100%
rename from arch/cris/arch-v10/boot/rescue/testrescue.S
rename to arch/cris/boot/rescue/testrescue.S
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/boot/tools/build.c
similarity index 100%
rename from arch/cris/arch-v10/boot/tools/build.c
rename to arch/cris/boot/tools/build.c
-- 
GitLab


From d7bd15f67ebaaebc842a971e600c364a73b81b22 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 21 Apr 2009 13:10:33 +0200
Subject: [PATCH 0588/1421] CRISv32: Remove obsolete vcs_hook.o from Makefile

On Sun, Apr 19, 2009 at 10:01:50PM +0200, Robert P. J. Day wrote:
> ./arch/cris/arch-v32/kernel/Makefile:obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
>
>   there appears to be no definition of ETRAXFS_SIM anywhere.

There hasn't been a vcs_hook.c file here for ages.
Remove the line from the Makefile.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
---
 arch/cris/arch-v32/kernel/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile
index 993d987b007..40358355d0c 100644
--- a/arch/cris/arch-v32/kernel/Makefile
+++ b/arch/cris/arch-v32/kernel/Makefile
@@ -9,8 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
-- 
GitLab


From e10f9d87c9ac9fdfadb6305dbbc9052e49a02fdd Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Tue, 21 Apr 2009 15:17:54 +0200
Subject: [PATCH 0589/1421] [ALSA] ac97_codec: increase timeout for analog
 subsections

On some hardware platforms, the AC97 codec requires more time
to wake up.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/ac97/ac97_codec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 97ee127ac33..78288dbfc17 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -2122,7 +2122,7 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
 		}
 		/* nothing should be in powerdown mode */
 		snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0);
-		end_time = jiffies + msecs_to_jiffies(100);
+		end_time = jiffies + msecs_to_jiffies(120);
 		do {
 			if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f)
 				goto __ready_ok;
-- 
GitLab


From 30fd9940eee910d847f48bd8740b2d0eaa8d2cfc Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Tue, 21 Apr 2009 15:30:31 +0200
Subject: [PATCH 0590/1421] [ALSA] intel8x0: another attempt to fix ac97_clock
 measure routine

Appearently, a big delay ~300ms is required before hw is settled and ready
to transfer samples on some hardware variants. Also, return back
"clocking to 48000Hz" message when something fails.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
---
 sound/pci/intel8x0.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 5dced5b7938..c4ba486785c 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2751,11 +2751,12 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	if (pos == 0) {
 		snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
 	      __retry:
-		if (attempt < 2) {
+		if (attempt < 3) {
+			msleep(300);
 			attempt++;
 			goto __again;
 		}
-		return;
+		goto __end;
 	}
 
 	pos /= 4;
@@ -2782,6 +2783,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	else if (pos < 47500 || pos > 48500)
 		/* not 48000Hz, tuning the clock.. */
 		chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
+      __end:
 	printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
 	snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
 }
-- 
GitLab


From 8340437210390676f687633a80e3748c40885dc8 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Mon, 20 Apr 2009 14:58:35 -0400
Subject: [PATCH 0591/1421] NFS: Fix the XDR iovec calculation in
 nfs3_xdr_setaclargs

Commit ae46141ff08f1965b17c531b571953c39ce8b9e2 (NFSv3: Fix posix ACL code)
introduces a bug in the calculation of the XDR header iovec. In the case
where we are inlining the acls, we need to adjust the length of the iovec
req->rq_svec, in addition to adjusting the total buffer length.

Tested-by: Leonardo Chiquitto <leonardo.lists@gmail.com>
Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfs/nfs3xdr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index e6a1932c711..35869a4921f 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -713,7 +713,8 @@ nfs3_xdr_setaclargs(struct rpc_rqst *req, __be32 *p,
 	if (args->npages != 0)
 		xdr_encode_pages(buf, args->pages, 0, args->len);
 	else
-		req->rq_slen += args->len;
+		req->rq_slen = xdr_adjust_iovec(req->rq_svec,
+				p + XDR_QUADLEN(args->len));
 
 	err = nfsacl_encode(buf, base, args->inode,
 			    (args->mask & NFS_ACL) ?
-- 
GitLab


From 8b9cf76d0fa6cd98fe42dd2f86460d6ede55fed8 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Tue, 21 Apr 2009 13:44:13 +0200
Subject: [PATCH 0592/1421] Fix SYSCALL_ALIAS for older MIPS assembler

Older MIPS assembler don't support .set for defining aliases.
Using = works for old and new assembers.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/syscalls.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index dabe4ad8914..40617c1d897 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -148,7 +148,7 @@ struct old_linux_dirent;
 	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
 	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
 #else
-#ifdef CONFIG_ALPHA
+#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
 #define SYSCALL_ALIAS(alias, name)					\
 	asm ( #alias " = " #name "\n\t.globl " #alias)
 #else
-- 
GitLab


From ce88168f5b5eca7f40394fa6b05ae29f4b685569 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 21 Apr 2009 12:35:15 +0100
Subject: [PATCH 0593/1421] ASoC: Fix offset of freqmode in WM8580 PLL
 configuration

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
---
 sound/soc/codecs/wm8580.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 442ea6f160f..41aab4a7a25 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -522,7 +522,7 @@ static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai,
 	reg = wm8580_read(codec, WM8580_PLLA4 + offset);
 	reg &= ~0x3f;
 	reg |= pll_div.prescale | pll_div.postscale << 1 |
-		pll_div.freqmode << 4;
+		pll_div.freqmode << 3;
 
 	wm8580_write(codec, WM8580_PLLA4 + offset, reg);
 
-- 
GitLab


From 5bd3729f6818721f76a2a2f7d2ecad899bace340 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 21 Apr 2009 18:36:30 +0200
Subject: [PATCH 0594/1421] ALSA: hda - Add quirk for Packard Bell RS65

Added a quirk (model=m51va) for Packard Bell RS65 with ALC663.

Reference: Novell bnc#496787
	https://bugzilla.novell.com/show_bug.cgi?id=496787

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c9300a3427e..b8a0d3e7927 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -16464,6 +16464,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
 	SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
 	SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
 					ALC662_3ST_6ch_DIG),
-- 
GitLab


From 546888da82082555a56528730a83f0afd12f33bf Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Tue, 21 Apr 2009 11:53:38 -0400
Subject: [PATCH 0595/1421] Btrfs: fix btrfs fallocate oops and deadlock

Btrfs fallocate was incorrectly starting a transaction with a lock held
on the extent_io tree for the file, which could deadlock.  Strictly
speaking it was using join_transaction which would be safe, but it is better
to move the transaction outside of the lock.

When preallocated extents are overwritten, btrfs_mark_buffer_dirty was
being called on an unlocked buffer.  This was triggering an assertion and
oops because the lock is supposed to be held.

The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had
been run.  btrfs_del_item takes care of dirtying things, so the solution is a
to skip the btrfs_mark_buffer_dirty call in this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/file.c  |  4 +++-
 fs/btrfs/inode.c | 36 ++++++++++++++++++++++++++++--------
 2 files changed, 31 insertions(+), 9 deletions(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index e21c0060ee7..482f8db2cfd 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -830,7 +830,7 @@ again:
 
 		ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
 		BUG_ON(ret);
-		goto done;
+		goto release;
 	} else if (split == start) {
 		if (locked_end < extent_end) {
 			ret = try_lock_extent(&BTRFS_I(inode)->io_tree,
@@ -926,6 +926,8 @@ again:
 	}
 done:
 	btrfs_mark_buffer_dirty(leaf);
+
+release:
 	btrfs_release_path(root, path);
 	if (split_end && split == start) {
 		split = end;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a0d1dd492a5..65219f6a16a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4970,10 +4970,10 @@ out_fail:
 	return err;
 }
 
-static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
+static int prealloc_file_range(struct btrfs_trans_handle *trans,
+			       struct inode *inode, u64 start, u64 end,
 			       u64 alloc_hint, int mode)
 {
-	struct btrfs_trans_handle *trans;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_key ins;
 	u64 alloc_size;
@@ -4981,10 +4981,6 @@ static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
 	u64 num_bytes = end - start;
 	int ret = 0;
 
-	trans = btrfs_join_transaction(root, 1);
-	BUG_ON(!trans);
-	btrfs_set_trans_block_group(trans, inode);
-
 	while (num_bytes > 0) {
 		alloc_size = min(num_bytes, root->fs_info->max_extent);
 		ret = btrfs_reserve_extent(trans, root, alloc_size,
@@ -5015,7 +5011,6 @@ out:
 		BUG_ON(ret);
 	}
 
-	btrfs_end_transaction(trans, root);
 	return ret;
 }
 
@@ -5029,11 +5024,18 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 	u64 alloc_hint = 0;
 	u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
 	struct extent_map *em;
+	struct btrfs_trans_handle *trans;
 	int ret;
 
 	alloc_start = offset & ~mask;
 	alloc_end =  (offset + len + mask) & ~mask;
 
+	/*
+	 * wait for ordered IO before we have any locks.  We'll loop again
+	 * below with the locks held.
+	 */
+	btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
+
 	mutex_lock(&inode->i_mutex);
 	if (alloc_start > inode->i_size) {
 		ret = btrfs_cont_expand(inode, alloc_start);
@@ -5043,6 +5045,16 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
+
+		trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
+		if (!trans) {
+			ret = -EIO;
+			goto out;
+		}
+
+		/* the extent lock is ordered inside the running
+		 * transaction
+		 */
 		lock_extent(&BTRFS_I(inode)->io_tree, alloc_start,
 			    alloc_end - 1, GFP_NOFS);
 		ordered = btrfs_lookup_first_ordered_extent(inode,
@@ -5053,6 +5065,12 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 			btrfs_put_ordered_extent(ordered);
 			unlock_extent(&BTRFS_I(inode)->io_tree,
 				      alloc_start, alloc_end - 1, GFP_NOFS);
+			btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+
+			/*
+			 * we can't wait on the range with the transaction
+			 * running or with the extent lock held
+			 */
 			btrfs_wait_ordered_range(inode, alloc_start,
 						 alloc_end - alloc_start);
 		} else {
@@ -5070,7 +5088,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		last_byte = min(extent_map_end(em), alloc_end);
 		last_byte = (last_byte + mask) & ~mask;
 		if (em->block_start == EXTENT_MAP_HOLE) {
-			ret = prealloc_file_range(inode, cur_offset,
+			ret = prealloc_file_range(trans, inode, cur_offset,
 					last_byte, alloc_hint, mode);
 			if (ret < 0) {
 				free_extent_map(em);
@@ -5089,6 +5107,8 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 	}
 	unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1,
 		      GFP_NOFS);
+
+	btrfs_end_transaction(trans, BTRFS_I(inode)->root);
 out:
 	mutex_unlock(&inode->i_mutex);
 	return ret;
-- 
GitLab


From 5bf0da7dd0ae193e072412519cba1d77b6196c61 Mon Sep 17 00:00:00 2001
From: Nicolas Morey-Chaisemartin <nicolas.morey-chaisemartin@ext.bull.net>
Date: Tue, 21 Apr 2009 10:11:06 -0700
Subject: [PATCH 0596/1421] mlx4_core: Fix memory leak in mlx4_enable_msi_x()

When the msi_x option is enabled but pci_enable_msix() fails (not
enough vectors are available etc), the entries array was not freed on
the error path.

Signed-off-by: Nicolas Morey-Chaisemartin <nicolas.morey-chaisemartin@ext.bull.net>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 102bac90a30..30bea968969 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -976,7 +976,7 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
 				nreq = err;
 				goto retry;
 			}
-
+			kfree(entries);
 			goto no_msi;
 		}
 
-- 
GitLab


From cc005fa20c5229c283bea4958869da1e3c8a3720 Mon Sep 17 00:00:00 2001
From: Matt Kraai <kraai@ftbfs.org>
Date: Tue, 21 Apr 2009 10:43:21 -0700
Subject: [PATCH 0597/1421] RDMA/nes: Remove root_256()'s unused pbl_count_256
 parameter

Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Acked-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_verbs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index f04bb1a5da4..504e31d9f50 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1895,8 +1895,7 @@ static int nes_destroy_cq(struct ib_cq *ib_cq)
 static u32 root_256(struct nes_device *nesdev,
 		    struct nes_root_vpbl *root_vpbl,
 		    struct nes_root_vpbl *new_root,
-		    u16 pbl_count_4k,
-		    u16 pbl_count_256)
+		    u16 pbl_count_4k)
 {
 	u64 leaf_pbl;
 	int i, j, k;
@@ -2012,7 +2011,7 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd,
 	}
 
 	if (use_256_pbls && use_two_level) {
-		if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k, pbl_count_256) == 1) {
+		if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k) == 1) {
 			if (new_root.pbl_pbase != 0)
 				root_vpbl = &new_root;
 		} else {
-- 
GitLab


From 7400516ab40d8fe55031dc8d614e2b365bd95f1c Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Tue, 21 Apr 2009 21:47:22 +0200
Subject: [PATCH 0598/1421] go7007: Convert to the new i2c device binding model

Move the go7007 driver away from the legacy i2c binding model, which
is going away really soon now.

The I2C addresses of the audio and video chips in s2250-board didn't
look quite right, apparently they were left-aligned values when Linux
wants right-aligned values, so I fixed them too.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/go7007/go7007-driver.c  | 11 +++-
 drivers/staging/go7007/go7007-i2c.c     | 83 -------------------------
 drivers/staging/go7007/go7007-priv.h    |  1 +
 drivers/staging/go7007/go7007-usb.c     | 14 ++++-
 drivers/staging/go7007/s2250-board.c    | 71 +++++++++------------
 drivers/staging/go7007/wis-i2c.h        |  9 ---
 drivers/staging/go7007/wis-ov7640.c     | 56 +++++------------
 drivers/staging/go7007/wis-saa7113.c    | 60 ++++++------------
 drivers/staging/go7007/wis-saa7115.c    | 60 ++++++------------
 drivers/staging/go7007/wis-sony-tuner.c | 60 ++++++------------
 drivers/staging/go7007/wis-tw2804.c     | 57 ++++++-----------
 drivers/staging/go7007/wis-tw9903.c     | 60 ++++++------------
 drivers/staging/go7007/wis-uda1342.c    | 52 +++++-----------
 13 files changed, 176 insertions(+), 418 deletions(-)

diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index f47c0ce2849..77b1e769ac9 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -191,8 +191,10 @@ int go7007_reset_encoder(struct go7007 *go)
 /*
  * Attempt to instantiate an I2C client by ID, probably loading a module.
  */
-static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
+static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
+			   int id, int addr)
 {
+	struct i2c_board_info info;
 	char *modname;
 
 	switch (id) {
@@ -226,7 +228,11 @@ static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
 	}
 	if (modname != NULL)
 		request_module(modname);
-	if (wis_i2c_probe_device(adapter, id, addr) == 1)
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = addr;
+	strlcpy(info.type, type, I2C_NAME_SIZE);
+	if (!i2c_new_device(adapter, &info))
 		return 0;
 	if (modname != NULL)
 		printk(KERN_INFO
@@ -266,6 +272,7 @@ int go7007_register_encoder(struct go7007 *go)
 	if (go->i2c_adapter_online) {
 		for (i = 0; i < go->board_info->num_i2c_devs; ++i)
 			init_i2c_module(&go->i2c_adapter,
+					go->board_info->i2c_devs[i].type,
 					go->board_info->i2c_devs[i].id,
 					go->board_info->i2c_devs[i].addr);
 		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c
index cd55b76eabc..c82867fdd28 100644
--- a/drivers/staging/go7007/go7007-i2c.c
+++ b/drivers/staging/go7007/go7007-i2c.c
@@ -31,87 +31,6 @@
 #include "go7007-priv.h"
 #include "wis-i2c.h"
 
-/************** Registration interface for I2C client drivers **************/
-
-/* Since there's no way to auto-probe the I2C devices connected to the I2C
- * bus on the go7007, we have this silly little registration system that
- * client drivers can use to register their I2C driver ID and their
- * detect_client function (the one that's normally passed to i2c_probe).
- *
- * When a new go7007 device is connected, we can look up in a board info
- * table by the USB or PCI vendor/product/revision ID to determine
- * which I2C client module to load.  The client driver module will register
- * itself here, and then we can call the registered detect_client function
- * to force-load a new client at the address listed in the board info table.
- *
- * Really the I2C subsystem should have a way to force-load I2C client
- * drivers when we have a priori knowledge of what's on the bus, especially
- * since the existing I2C auto-probe mechanism is so hokey, but we'll use
- * our own mechanism for the time being. */
-
-struct wis_i2c_client_driver {
-	unsigned int id;
-	found_proc found_proc;
-	struct list_head list;
-};
-
-static LIST_HEAD(i2c_client_drivers);
-static DECLARE_MUTEX(i2c_client_driver_list_lock);
-
-/* Client drivers register here by their I2C driver ID */
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc)
-{
-	struct wis_i2c_client_driver *driver;
-
-	driver = kmalloc(sizeof(struct wis_i2c_client_driver), GFP_KERNEL);
-	if (driver == NULL)
-		return -ENOMEM;
-	driver->id = id;
-	driver->found_proc = found_proc;
-
-	down(&i2c_client_driver_list_lock);
-	list_add_tail(&driver->list, &i2c_client_drivers);
-	up(&i2c_client_driver_list_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(wis_i2c_add_driver);
-
-void wis_i2c_del_driver(found_proc found_proc)
-{
-	struct wis_i2c_client_driver *driver, *next;
-
-	down(&i2c_client_driver_list_lock);
-	list_for_each_entry_safe(driver, next, &i2c_client_drivers, list)
-		if (driver->found_proc == found_proc) {
-			list_del(&driver->list);
-			kfree(driver);
-		}
-	up(&i2c_client_driver_list_lock);
-}
-EXPORT_SYMBOL(wis_i2c_del_driver);
-
-/* The main go7007 driver calls this to instantiate a client by driver
- * ID and bus address, which are both stored in the board info table */
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
-				unsigned int id, int addr)
-{
-	struct wis_i2c_client_driver *driver;
-	int found = 0;
-
-	if (addr < 0 || addr > 0x7f)
-		return -1;
-	down(&i2c_client_driver_list_lock);
-	list_for_each_entry(driver, &i2c_client_drivers, list)
-		if (driver->id == id) {
-			if (driver->found_proc(adapter, addr, 0) == 0)
-				found = 1;
-			break;
-		}
-	up(&i2c_client_driver_list_lock);
-	return found;
-}
-
 /********************* Driver for on-board I2C adapter *********************/
 
 /* #define GO7007_I2C_DEBUG */
@@ -287,9 +206,7 @@ static struct i2c_algorithm go7007_algo = {
 
 static struct i2c_adapter go7007_adap_templ = {
 	.owner			= THIS_MODULE,
-	.class			= I2C_CLASS_TV_ANALOG,
 	.name			= "WIS GO7007SB",
-	.id			= I2C_ALGO_GO7007,
 	.algo			= &go7007_algo,
 };
 
diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/go7007/go7007-priv.h
index 372f1f1c09b..178d18119fa 100644
--- a/drivers/staging/go7007/go7007-priv.h
+++ b/drivers/staging/go7007/go7007-priv.h
@@ -87,6 +87,7 @@ struct go7007_board_info {
 	int audio_main_div;
 	int num_i2c_devs;
 	struct {
+		const char *type;
 		int id;
 		int addr;
 	} i2c_devs[4];
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
index 83eec920c7d..aa4a9e0b995 100644
--- a/drivers/staging/go7007/go7007-usb.c
+++ b/drivers/staging/go7007/go7007-usb.c
@@ -91,6 +91,7 @@ static struct go7007_usb_board board_matrix_ii = {
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7115",
 				.id	= I2C_DRIVERID_WIS_SAA7115,
 				.addr	= 0x20,
 			},
@@ -127,6 +128,7 @@ static struct go7007_usb_board board_matrix_reload = {
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7113",
 				.id	= I2C_DRIVERID_WIS_SAA7113,
 				.addr	= 0x25,
 			},
@@ -164,6 +166,7 @@ static struct go7007_usb_board board_star_trek = {
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7115",
 				.id	= I2C_DRIVERID_WIS_SAA7115,
 				.addr	= 0x20,
 			},
@@ -209,14 +212,17 @@ static struct go7007_usb_board board_px_tv402u = {
 		.num_i2c_devs	 = 3,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7115",
 				.id	= I2C_DRIVERID_WIS_SAA7115,
 				.addr	= 0x20,
 			},
 			{
+				.type	= "wis_uda1342",
 				.id	= I2C_DRIVERID_WIS_UDA1342,
 				.addr	= 0x1a,
 			},
 			{
+				.type	= "wis_sony_tuner",
 				.id	= I2C_DRIVERID_WIS_SONY_TUNER,
 				.addr	= 0x60,
 			},
@@ -264,6 +270,7 @@ static struct go7007_usb_board board_xmen = {
 		.num_i2c_devs	  = 1,
 		.i2c_devs	  = {
 			{
+				.type	= "wis_ov7640",
 				.id	= I2C_DRIVERID_WIS_OV7640,
 				.addr	= 0x21,
 			},
@@ -296,6 +303,7 @@ static struct go7007_usb_board board_matrix_revolution = {
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_tw9903",
 				.id	= I2C_DRIVERID_WIS_TW9903,
 				.addr	= 0x44,
 			},
@@ -385,6 +393,7 @@ static struct go7007_usb_board board_adlink_mpg24 = {
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_twTW2804",
 				.id	= I2C_DRIVERID_WIS_TW2804,
 				.addr	= 0x00, /* yes, really */
 			},
@@ -415,8 +424,9 @@ static struct go7007_usb_board board_sensoray_2250 = {
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "s2250_board",
 				.id	= I2C_DRIVERID_S2250,
-				.addr	= 0x34,
+				.addr	= 0x43,
 			},
 		},
 		.num_inputs	 = 2,
@@ -943,9 +953,7 @@ static struct i2c_algorithm go7007_usb_algo = {
 
 static struct i2c_adapter go7007_usb_adap_templ = {
 	.owner			= THIS_MODULE,
-	.class			= I2C_CLASS_TV_ANALOG,
 	.name			= "WIS GO7007SB EZ-USB",
-	.id			= I2C_ALGO_GO7007_USB,
 	.algo			= &go7007_usb_algo,
 };
 
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c
index d333ea2cd77..1706fbf0684 100644
--- a/drivers/staging/go7007/s2250-board.c
+++ b/drivers/staging/go7007/s2250-board.c
@@ -28,7 +28,6 @@ extern int s2250loader_init(void);
 extern void s2250loader_cleanup(void);
 
 #define TLV320_ADDRESS      0x34
-#define S2250_VIDDEC        0x86
 #define VPX322_ADDR_ANALOGCONTROL1	0x02
 #define VPX322_ADDR_BRIGHTNESS0		0x0127
 #define VPX322_ADDR_BRIGHTNESS1		0x0131
@@ -123,6 +122,7 @@ struct s2250 {
 	int hue;
 	int reg12b_val;
 	int audio_input;
+	struct i2c_client *audio;
 };
 
 /* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/
@@ -452,16 +452,15 @@ static int s2250_command(struct i2c_client *client,
 	{
 		struct v4l2_audio *audio = arg;
 
-		client->addr = TLV320_ADDRESS;
 		switch (audio->index) {
 		case 0:
-			write_reg(client, 0x08, 0x02); /* Line In */
+			write_reg(dec->audio, 0x08, 0x02); /* Line In */
 			break;
 		case 1:
-			write_reg(client, 0x08, 0x04); /* Mic */
+			write_reg(dec->audio, 0x08, 0x04); /* Mic */
 			break;
 		case 2:
-			write_reg(client, 0x08, 0x05); /* Mic Boost */
+			write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */
 			break;
 		default:
 			return -EINVAL;
@@ -477,31 +476,23 @@ static int s2250_command(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_driver s2250_driver;
-
-static struct i2c_client s2250_client_templ = {
-	.name		= "Sensoray 2250",
-	.driver		= &s2250_driver,
-};
-
-static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int s2250_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_client *audio;
+	struct i2c_adapter *adapter = client->adapter;
 	struct s2250 *dec;
 	u8 *data;
 	struct go7007 *go = i2c_get_adapdata(adapter);
 	struct go7007_usb *usb = go->hpi_context;
 
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
+	audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
+	if (audio == NULL)
 		return -ENOMEM;
-	memcpy(client, &s2250_client_templ,
-	       sizeof(s2250_client_templ));
-	client->adapter = adapter;
 
 	dec = kmalloc(sizeof(struct s2250), GFP_KERNEL);
 	if (dec == NULL) {
-		kfree(client);
+		i2c_unregister_device(audio);
 		return -ENOMEM;
 	}
 
@@ -510,7 +501,7 @@ static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
 	dec->contrast = 50;
 	dec->saturation = 50;
 	dec->hue = 0;
-	client->addr = TLV320_ADDRESS;
+	dec->audio = audio;
 	i2c_set_clientdata(client, dec);
 
 	printk(KERN_DEBUG
@@ -518,28 +509,25 @@ static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
 	       adapter->name);
 
 	/* initialize the audio */
-	client->addr = TLV320_ADDRESS;
-	if (write_regs(client, aud_regs) < 0) {
+	if (write_regs(audio, aud_regs) < 0) {
 		printk(KERN_ERR
 		       "s2250: error initializing audio\n");
-		kfree(client);
+		i2c_unregister_device(audio);
 		kfree(dec);
 		return 0;
 	}
-	client->addr = S2250_VIDDEC;
-	i2c_set_clientdata(client, dec);
 
 	if (write_regs(client, vid_regs) < 0) {
 		printk(KERN_ERR
 		       "s2250: error initializing decoder\n");
-		kfree(client);
+		i2c_unregister_device(audio);
 		kfree(dec);
 		return 0;
 	}
 	if (write_regs_fp(client, vid_regs_fp) < 0) {
 		printk(KERN_ERR
 		       "s2250: error initializing decoder\n");
-		kfree(client);
+		i2c_unregister_device(audio);
 		kfree(dec);
 		return 0;
 	}
@@ -575,32 +563,33 @@ static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
 		up(&usb->i2c_lock);
 	}
 
-	i2c_attach_client(client);
 	printk("s2250: initialized successfully\n");
 	return 0;
 }
 
-static int s2250_detach(struct i2c_client *client)
+static int s2250_remove(struct i2c_client *client)
 {
 	struct s2250 *dec = i2c_get_clientdata(client);
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
 
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
+	i2c_unregister_device(dec->audio);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id s2250_id[] = {
+	{ "s2250_board", 0 },
+	{ }
+};
+
 static struct i2c_driver s2250_driver = {
 	.driver = {
 		.name	= "Sensoray 2250 board driver",
 	},
-	.id		= I2C_DRIVERID_S2250,
-	.detach_client	= s2250_detach,
+	.probe		= s2250_probe,
+	.remove		= s2250_remove,
 	.command	= s2250_command,
+	.id_table	= s2250_id,
 };
 
 static int __init s2250_init(void)
@@ -613,13 +602,13 @@ static int __init s2250_init(void)
 
 	r = i2c_add_driver(&s2250_driver);
 	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(s2250_driver.id, s2250_detect);
+		s2250loader_cleanup();
+
+	return r;
 }
 
 static void __exit s2250_cleanup(void)
 {
-	wis_i2c_del_driver(s2250_detect);
 	i2c_del_driver(&s2250_driver);
 
 	s2250loader_cleanup();
diff --git a/drivers/staging/go7007/wis-i2c.h b/drivers/staging/go7007/wis-i2c.h
index 431f41dd396..3c2b9be455d 100644
--- a/drivers/staging/go7007/wis-i2c.h
+++ b/drivers/staging/go7007/wis-i2c.h
@@ -24,21 +24,12 @@
 #define	I2C_DRIVERID_WIS_OV7640		0xf0f5
 #define	I2C_DRIVERID_WIS_TW2804		0xf0f6
 #define	I2C_DRIVERID_S2250		0xf0f7
-#define	I2C_ALGO_GO7007			0xf00000
-#define	I2C_ALGO_GO7007_USB		0xf10000
 
 /* Flag to indicate that the client needs to be accessed with SCCB semantics */
 /* We re-use the I2C_M_TEN value so the flag passes through the masks in the
  * core I2C code.  Major kludge, but the I2C layer ain't exactly flexible. */
 #define	I2C_CLIENT_SCCB			0x10
 
-typedef int (*found_proc) (struct i2c_adapter *, int, int);
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc);
-void wis_i2c_del_driver(found_proc found_proc);
-
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
-				unsigned int id, int addr);
-
 /* Definitions for new video decoder commands */
 
 struct video_decoder_resolution {
diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c
index 2f9efca0460..04d6d3a498a 100644
--- a/drivers/staging/go7007/wis-ov7640.c
+++ b/drivers/staging/go7007/wis-ov7640.c
@@ -50,76 +50,54 @@ static int write_regs(struct i2c_client *client, u8 *regs)
 	return 0;
 }
 
-static struct i2c_driver wis_ov7640_driver;
-
-static struct i2c_client wis_ov7640_client_templ = {
-	.name		= "OV7640 (WIS)",
-	.driver		= &wis_ov7640_driver,
-};
-
-static int wis_ov7640_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_ov7640_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_ov7640_client_templ,
-			sizeof(wis_ov7640_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
+
 	client->flags = I2C_CLIENT_SCCB;
 
 	printk(KERN_DEBUG
 		"wis-ov7640: initializing OV7640 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR "wis-ov7640: error initializing OV7640\n");
-		kfree(client);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_ov7640_detach(struct i2c_client *client)
+static int wis_ov7640_remove(struct i2c_client *client)
 {
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
 	return 0;
 }
 
+static struct i2c_device_id wis_ov7640_id[] = {
+	{ "wis_ov7640", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_ov7640_driver = {
 	.driver = {
 		.name	= "WIS OV7640 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_OV7640,
-	.detach_client	= wis_ov7640_detach,
+	.probe		= wis_ov7640_probe,
+	.remove		= wis_ov7640_remove,
+	.id_table	= wis_ov7640_id,
 };
 
 static int __init wis_ov7640_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_ov7640_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_ov7640_driver.id, wis_ov7640_detect);
+	return i2c_add_driver(&wis_ov7640_driver);
 }
 
 static void __exit wis_ov7640_cleanup(void)
 {
-	wis_i2c_del_driver(wis_ov7640_detect);
 	i2c_del_driver(&wis_ov7640_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c
index 11689723945..9ab893bd204 100644
--- a/drivers/staging/go7007/wis-saa7113.c
+++ b/drivers/staging/go7007/wis-saa7113.c
@@ -261,34 +261,19 @@ static int wis_saa7113_command(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_driver wis_saa7113_driver;
-
-static struct i2c_client wis_saa7113_client_templ = {
-	.name		= "SAA7113 (WIS)",
-	.driver		= &wis_saa7113_driver,
-};
-
-static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7113_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_saa7113 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_saa7113_client_templ,
-			sizeof(wis_saa7113_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_saa7113), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 128;
 	dec->contrast = 71;
@@ -298,56 +283,49 @@ static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind)
 
 	printk(KERN_DEBUG
 		"wis-saa7113: initializing SAA7113 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR
 			"wis-saa7113: error initializing SAA7113\n");
-		kfree(client);
 		kfree(dec);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_saa7113_detach(struct i2c_client *client)
+static int wis_saa7113_remove(struct i2c_client *client)
 {
 	struct wis_saa7113 *dec = i2c_get_clientdata(client);
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
 
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_saa7113_id[] = {
+	{ "wis_saa7113", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_saa7113_driver = {
 	.driver = {
 		.name	= "WIS SAA7113 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_SAA7113,
-	.detach_client	= wis_saa7113_detach,
+	.probe		= wis_saa7113_probe,
+	.remove		= wis_saa7113_remove,
 	.command	= wis_saa7113_command,
+	.id_table	= wis_saa7113_id,
 };
 
 static int __init wis_saa7113_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_saa7113_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_saa7113_driver.id, wis_saa7113_detect);
+	return i2c_add_driver(&wis_saa7113_driver);
 }
 
 static void __exit wis_saa7113_cleanup(void)
 {
-	wis_i2c_del_driver(wis_saa7113_detect);
 	i2c_del_driver(&wis_saa7113_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c
index 59417a7174d..8687ad2de76 100644
--- a/drivers/staging/go7007/wis-saa7115.c
+++ b/drivers/staging/go7007/wis-saa7115.c
@@ -394,34 +394,19 @@ static int wis_saa7115_command(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_driver wis_saa7115_driver;
-
-static struct i2c_client wis_saa7115_client_templ = {
-	.name		= "SAA7115 (WIS)",
-	.driver		= &wis_saa7115_driver,
-};
-
-static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7115_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_saa7115 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_saa7115_client_templ,
-			sizeof(wis_saa7115_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_saa7115), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 128;
 	dec->contrast = 64;
@@ -431,56 +416,49 @@ static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind)
 
 	printk(KERN_DEBUG
 		"wis-saa7115: initializing SAA7115 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR
 			"wis-saa7115: error initializing SAA7115\n");
-		kfree(client);
 		kfree(dec);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_saa7115_detach(struct i2c_client *client)
+static int wis_saa7115_remove(struct i2c_client *client)
 {
 	struct wis_saa7115 *dec = i2c_get_clientdata(client);
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
 
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_saa7115_id[] = {
+	{ "wis_saa7115", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_saa7115_driver = {
 	.driver = {
 		.name	= "WIS SAA7115 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_SAA7115,
-	.detach_client	= wis_saa7115_detach,
+	.probe		= wis_saa7115_probe,
+	.remove		= wis_saa7115_remove,
 	.command	= wis_saa7115_command,
+	.id_table	= wis_saa7115_id,
 };
 
 static int __init wis_saa7115_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_saa7115_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_saa7115_driver.id, wis_saa7115_detect);
+	return i2c_add_driver(&wis_saa7115_driver);
 }
 
 static void __exit wis_saa7115_cleanup(void)
 {
-	wis_i2c_del_driver(wis_saa7115_detect);
 	i2c_del_driver(&wis_saa7115_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index 0a7eeef7c00..c965c601ac9 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -653,35 +653,19 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 	return 0;
 }
 
-static struct i2c_driver wis_sony_tuner_driver;
-
-static struct i2c_client wis_sony_tuner_client_templ = {
-	.name		= "Sony TV Tuner (WIS)",
-	.driver		= &wis_sony_tuner_driver,
-};
-
-static int wis_sony_tuner_detect(struct i2c_adapter *adapter,
-					int addr, int kind)
+static int wis_sony_tuner_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_sony_tuner *t;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_sony_tuner_client_templ,
-			sizeof(wis_sony_tuner_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	t = kmalloc(sizeof(struct wis_sony_tuner), GFP_KERNEL);
-	if (t == NULL) {
-		kfree(client);
+	if (t == NULL)
 		return -ENOMEM;
-	}
+
 	t->type = -1;
 	t->freq = 0;
 	t->mpxmode = 0;
@@ -690,50 +674,42 @@ static int wis_sony_tuner_detect(struct i2c_adapter *adapter,
 
 	printk(KERN_DEBUG
 		"wis-sony-tuner: initializing tuner at address %d on %s\n",
-		addr, adapter->name);
-
-	i2c_attach_client(client);
+		client->addr, adapter->name);
 
 	return 0;
 }
 
-static int wis_sony_tuner_detach(struct i2c_client *client)
+static int wis_sony_tuner_remove(struct i2c_client *client)
 {
 	struct wis_sony_tuner *t = i2c_get_clientdata(client);
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
 
+	i2c_set_clientdata(client, NULL);
 	kfree(t);
-	kfree(client);
 	return 0;
 }
 
+static struct i2c_device_id wis_sony_tuner_id[] = {
+	{ "wis_sony_tuner", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_sony_tuner_driver = {
 	.driver = {
 		.name	= "WIS Sony TV Tuner I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_SONY_TUNER,
-	.detach_client	= wis_sony_tuner_detach,
+	.probe		= wis_sony_tuner_probe,
+	.remove		= wis_sony_tuner_remove,
 	.command	= tuner_command,
+	.id_table	= wis_sony_tuner_id,
 };
 
 static int __init wis_sony_tuner_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_sony_tuner_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_sony_tuner_driver.id,
-					wis_sony_tuner_detect);
+	return i2c_add_driver(&wis_sony_tuner_driver);
 }
 
 static void __exit wis_sony_tuner_cleanup(void)
 {
-	wis_i2c_del_driver(wis_sony_tuner_detect);
 	i2c_del_driver(&wis_sony_tuner_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c
index 57b8f2b1caa..e15794a2a0a 100644
--- a/drivers/staging/go7007/wis-tw2804.c
+++ b/drivers/staging/go7007/wis-tw2804.c
@@ -291,34 +291,19 @@ static int wis_tw2804_command(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_driver wis_tw2804_driver;
-
-static struct i2c_client wis_tw2804_client_templ = {
-	.name		= "TW2804 (WIS)",
-	.driver		= &wis_tw2804_driver,
-};
-
-static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw2804_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_tw2804 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_tw2804_client_templ,
-			sizeof(wis_tw2804_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->channel = -1;
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 128;
@@ -328,48 +313,42 @@ static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind)
 	i2c_set_clientdata(client, dec);
 
 	printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_tw2804_detach(struct i2c_client *client)
+static int wis_tw2804_remove(struct i2c_client *client)
 {
 	struct wis_tw2804 *dec = i2c_get_clientdata(client);
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
 
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_tw2804_id[] = {
+	{ "wis_tw2804", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_tw2804_driver = {
 	.driver = {
 		.name	= "WIS TW2804 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_TW2804,
-	.detach_client	= wis_tw2804_detach,
+	.probe		= wis_tw2804_probe,
+	.remove		= wis_tw2804_remove,
 	.command	= wis_tw2804_command,
+	.id_table	= wis_tw2804_id,
 };
 
 static int __init wis_tw2804_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_tw2804_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_tw2804_driver.id, wis_tw2804_detect);
+	return i2c_add_driver(&wis_tw2804_driver);
 }
 
 static void __exit wis_tw2804_cleanup(void)
 {
-	wis_i2c_del_driver(wis_tw2804_detect);
 	i2c_del_driver(&wis_tw2804_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c
index 40627b282cb..6c3427bb6f4 100644
--- a/drivers/staging/go7007/wis-tw9903.c
+++ b/drivers/staging/go7007/wis-tw9903.c
@@ -267,34 +267,19 @@ static int wis_tw9903_command(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_driver wis_tw9903_driver;
-
-static struct i2c_client wis_tw9903_client_templ = {
-	.name		= "TW9903 (WIS)",
-	.driver		= &wis_tw9903_driver,
-};
-
-static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw9903_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_tw9903 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_tw9903_client_templ,
-			sizeof(wis_tw9903_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_tw9903), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 0;
 	dec->contrast = 0x60;
@@ -303,55 +288,48 @@ static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind)
 
 	printk(KERN_DEBUG
 		"wis-tw9903: initializing TW9903 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
-		kfree(client);
 		kfree(dec);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_tw9903_detach(struct i2c_client *client)
+static int wis_tw9903_remove(struct i2c_client *client)
 {
 	struct wis_tw9903 *dec = i2c_get_clientdata(client);
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
 
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_tw9903_id[] = {
+	{ "wis_tw9903", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_tw9903_driver = {
 	.driver = {
 		.name	= "WIS TW9903 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_TW9903,
-	.detach_client	= wis_tw9903_detach,
+	.probe		= wis_tw9903_probe,
+	.remove		= wis_tw9903_remove,
 	.command	= wis_tw9903_command,
+	.id_table	= wis_tw9903_id,
 };
 
 static int __init wis_tw9903_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_tw9903_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_tw9903_driver.id, wis_tw9903_detect);
+	return i2c_add_driver(&wis_tw9903_driver);
 }
 
 static void __exit wis_tw9903_cleanup(void)
 {
-	wis_i2c_del_driver(wis_tw9903_detect);
 	i2c_del_driver(&wis_tw9903_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c
index 555645c0cc1..739c7ae8913 100644
--- a/drivers/staging/go7007/wis-uda1342.c
+++ b/drivers/staging/go7007/wis-uda1342.c
@@ -59,73 +59,51 @@ static int wis_uda1342_command(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_driver wis_uda1342_driver;
-
-static struct i2c_client wis_uda1342_client_templ = {
-	.name		= "UDA1342 (WIS)",
-	.driver		= &wis_uda1342_driver,
-};
-
-static int wis_uda1342_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_uda1342_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_uda1342_client_templ,
-			sizeof(wis_uda1342_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	printk(KERN_DEBUG
 		"wis-uda1342: initializing UDA1342 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	write_reg(client, 0x00, 0x8000); /* reset registers */
 	write_reg(client, 0x00, 0x1241); /* select input 1 */
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_uda1342_detach(struct i2c_client *client)
+static int wis_uda1342_remove(struct i2c_client *client)
 {
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
 	return 0;
 }
 
+static struct i2c_device_id wis_uda1342_id[] = {
+	{ "wis_uda1342", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_uda1342_driver = {
 	.driver = {
 		.name	= "WIS UDA1342 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_UDA1342,
-	.detach_client	= wis_uda1342_detach,
+	.probe		= wis_uda1342_probe,
+	.remove		= wis_uda1342_remove,
 	.command	= wis_uda1342_command,
+	.id_table	= wis_uda1342_id,
 };
 
 static int __init wis_uda1342_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_uda1342_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_uda1342_driver.id, wis_uda1342_detect);
+	return i2c_add_driver(&wis_uda1342_driver);
 }
 
 static void __exit wis_uda1342_cleanup(void)
 {
-	wis_i2c_del_driver(wis_uda1342_detect);
 	i2c_del_driver(&wis_uda1342_driver);
 }
 
-- 
GitLab


From 3c48f23adada870db612a0dd3488605c4af5c0a5 Mon Sep 17 00:00:00 2001
From: Subrata Modak <subrata@linux.vnet.ibm.com>
Date: Sun, 19 Apr 2009 01:10:03 +0530
Subject: [PATCH 0599/1421] configfs: Fix Trivial Warning in
 fs/configfs/symlink.c

I observed the following build warning with fs/configfs/symlink.c:

fs/configfs/symlink.c: In function 'configfs_symlink':
fs/configfs/symlink.c:138: warning: 'target_item' may be used uninitialized in this function

Here is a small fix for this.

Cc: Patrick Mochel <mochel@osdl.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com>
Signed-Off-By: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/configfs/symlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index 932a92b3148..c8afa6b1d91 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -135,7 +135,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
 	struct path path;
 	struct configfs_dirent *sd;
 	struct config_item *parent_item;
-	struct config_item *target_item;
+	struct config_item *target_item = NULL;
 	struct config_item_type *type;
 
 	ret = -EPERM;  /* What lack-of-symlink returns */
-- 
GitLab


From 0dbbbf1a0e305ad900b733e2ba1cac304d31696e Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 18 Apr 2009 21:48:52 +0400
Subject: [PATCH 0600/1421] fsl_rio: Pass the proper device to dma mapping
 routines

The driver should pass a device that specifies internal DMA ops, but
currently NULL pointer is passed, therefore following bug appears
during boot up:

  ------------[ cut here ]------------
  Kernel BUG at c0018a7c [verbose debug info unavailable]
  Oops: Exception in kernel mode, sig: 5 [#1]
  [...]
  NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60
  LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60
  Call Trace:
  [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable)
  [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c
  [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50
  [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84
  [...]
  ---[ end trace 561bb236c800851f ]---

This patch fixes the issue.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_rio.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index a0fa4ebb39c..abdb124e1e2 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include <linux/rio.h>
 #include <linux/rio_drv.h>
 #include <linux/of_platform.h>
@@ -159,6 +160,7 @@ struct rio_msg_rx_ring {
 };
 
 struct rio_priv {
+	struct device *dev;
 	void __iomem *regs_win;
 	struct rio_atmu_regs __iomem *atmu_regs;
 	struct rio_atmu_regs __iomem *maint_atmu_regs;
@@ -484,13 +486,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
 
 	for (i = 0; i < priv->msg_tx_ring.size; i++) {
 		priv->msg_tx_ring.virt_buffer[i] =
-			dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+			dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
 		if (!priv->msg_tx_ring.virt_buffer[i]) {
 			rc = -ENOMEM;
 			for (j = 0; j < priv->msg_tx_ring.size; j++)
 				if (priv->msg_tx_ring.virt_buffer[j])
-					dma_free_coherent(NULL,
+					dma_free_coherent(priv->dev,
 							RIO_MSG_BUFFER_SIZE,
 							priv->msg_tx_ring.
 							virt_buffer[j],
@@ -501,7 +503,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
 	}
 
 	/* Initialize outbound message descriptor ring */
-	priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+	priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
 				priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 				&priv->msg_tx_ring.phys, GFP_KERNEL);
 	if (!priv->msg_tx_ring.virt) {
@@ -549,12 +551,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
 	return rc;
 
       out_irq:
-	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	dma_free_coherent(priv->dev,
+			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
 
       out_dma:
 	for (i = 0; i < priv->msg_tx_ring.size; i++)
-		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				  priv->msg_tx_ring.virt_buffer[i],
 				  priv->msg_tx_ring.phys_buffer[i]);
 
@@ -576,7 +579,8 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
 	out_be32(&priv->msg_regs->omr, 0);
 
 	/* Free ring */
-	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	dma_free_coherent(priv->dev,
+			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
 
 	/* Free interrupt */
@@ -654,7 +658,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
 		priv->msg_rx_ring.virt_buffer[i] = NULL;
 
 	/* Initialize inbound message ring */
-	priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+	priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
 				priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
 				&priv->msg_rx_ring.phys, GFP_KERNEL);
 	if (!priv->msg_rx_ring.virt) {
@@ -673,7 +677,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
 	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
 			 "msg_rx", (void *)mport);
 	if (rc < 0) {
-		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				  priv->msg_tx_ring.virt_buffer[i],
 				  priv->msg_tx_ring.phys_buffer[i]);
 		goto out;
@@ -713,7 +717,7 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
 	out_be32(&priv->msg_regs->imr, 0);
 
 	/* Free ring */
-	dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+	dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
 			  priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
 
 	/* Free interrupt */
@@ -890,7 +894,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
 	}
 
 	/* Initialize inbound doorbells */
-	priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+	priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
 		    DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
 	if (!priv->dbell_ring.virt) {
 		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
@@ -911,7 +915,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
 			 "dbell_rx", (void *)mport);
 	if (rc < 0) {
 		iounmap(priv->dbell_win);
-		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+		dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
 				  priv->dbell_ring.virt, priv->dbell_ring.phys);
 		printk(KERN_ERR
 		       "MPC85xx RIO: unable to request inbound doorbell irq");
@@ -1087,6 +1091,8 @@ int fsl_rio_setup(struct of_device *dev)
 	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
 	strcpy(port->name, "RIO0 mport");
 
+	priv->dev = &dev->dev;
+
 	port->ops = ops;
 	port->host_deviceid = fsl_rio_get_hdid(port->id);
 
-- 
GitLab


From 595e23f390b675a5a264af48a42eda81413f2598 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Mon, 20 Apr 2009 10:54:35 -0500
Subject: [PATCH 0601/1421] powerpc: don't disable SATA interrupts on Freescale
 MPC8610 HPCD

The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling
the SATA INTx interrupt, even when SATA support was enabled.  This was safe,
because the SATA driver re-enabled it.  But with commit a5bfc471 ("ahci: drop
intx manipulation on msi enable"), the driver no longer does this, and so SATA
support on the 8610 HPCD is broken.

The original quirk function disabled INTx because it caused some other
interrupt problem during early development on this board, but no one remembers
any more what that problem was, and it doesn't seem to occur any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/fsl_uli1575.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 1db6b9e037f..65a35f38e06 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
 	if (!machine_is(mpc86xx_hpcd))
 		return;
 
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
 	pci_read_config_byte(dev, 0x83, &c);
 	c |= 0x80;
 	pci_write_config_byte(dev, 0x83, c);
-- 
GitLab


From 44aa417910ec9cda6da42be914105e789273b507 Mon Sep 17 00:00:00 2001
From: Vlada Peric <vlada.peric@gmail.com>
Date: Tue, 21 Apr 2009 12:23:59 -0700
Subject: [PATCH 0602/1421] asiliantfb: add missing return statement

Commit 032220ba (asiliantfb: fix cmap memory leaks) changed the function
init_asiliant from void to int, resulting in the following compile warning:

  drivers/video/asiliantfb.c: In function `init_asiliant':
  drivers/video/asiliantfb.c:536: warning: control reaches end of non-void function

Fix the warning by returning 0.

Signed-off-by: Vlada Peric <vlada.peric@gmail.com>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/asiliantfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 1a1f946d8fe..9fe90ce928f 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -533,6 +533,7 @@ static int __devinit init_asiliant(struct fb_info *p, unsigned long addr)
 
 	writeb(0xff, mmio_base + 0x78c);
 	chips_hw_init(p);
+	return 0;
 }
 
 static int __devinit
-- 
GitLab


From ff14ed5db6e7e5e5dc23712d3c877891d4d9a1a8 Mon Sep 17 00:00:00 2001
From: "Denis V. Lunev" <den@openvz.org>
Date: Tue, 21 Apr 2009 12:23:59 -0700
Subject: [PATCH 0603/1421] pxafb: lcsr1 is unused without
 CONFIG_FB_PXA_OVERLAY

Fixes the warning:

  drivers/video/pxafb.c: In function 'pxafb_handle_irq':
  drivers/video/pxafb.c:1442: warning: unused variable 'lcsr1'

[akpm@linux-foundation.org: save an ifdef]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/pxafb.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 84f63205c46..0889d50c328 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1439,7 +1439,7 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
 {
 	struct pxafb_info *fbi = dev_id;
-	unsigned int lccr0, lcsr, lcsr1;
+	unsigned int lccr0, lcsr;
 
 	lcsr = lcd_readl(fbi, LCSR);
 	if (lcsr & LCSR_LDD) {
@@ -1455,14 +1455,16 @@ static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
 	lcd_writel(fbi, LCSR, lcsr);
 
 #ifdef CONFIG_FB_PXA_OVERLAY
-	lcsr1 = lcd_readl(fbi, LCSR1);
-	if (lcsr1 & LCSR1_BS(1))
-		complete(&fbi->overlay[0].branch_done);
+	{
+		unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
+		if (lcsr1 & LCSR1_BS(1))
+			complete(&fbi->overlay[0].branch_done);
 
-	if (lcsr1 & LCSR1_BS(2))
-		complete(&fbi->overlay[1].branch_done);
+		if (lcsr1 & LCSR1_BS(2))
+			complete(&fbi->overlay[1].branch_done);
 
-	lcd_writel(fbi, LCSR1, lcsr1);
+		lcd_writel(fbi, LCSR1, lcsr1);
+	}
 #endif
 	return IRQ_HANDLED;
 }
-- 
GitLab


From 8e19608e8b5c001e4a66ce482edc474f05fb7355 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 21 Apr 2009 12:24:00 -0700
Subject: [PATCH 0604/1421] clocksource: pass clocksource to read() callback

Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-at91/at91rm9200_time.c         |  2 +-
 arch/arm/mach-at91/at91sam926x_time.c        |  2 +-
 arch/arm/mach-davinci/time.c                 |  2 +-
 arch/arm/mach-imx/time.c                     |  2 +-
 arch/arm/mach-ixp4xx/common.c                |  2 +-
 arch/arm/mach-msm/timer.c                    |  4 ++--
 arch/arm/mach-netx/time.c                    |  2 +-
 arch/arm/mach-ns9xxx/time-ns9360.c           |  2 +-
 arch/arm/mach-omap1/time.c                   |  2 +-
 arch/arm/mach-omap2/timer-gp.c               |  2 +-
 arch/arm/mach-pxa/time.c                     |  2 +-
 arch/arm/mach-realview/core.c                |  2 +-
 arch/arm/mach-versatile/core.c               |  2 +-
 arch/arm/plat-mxc/time.c                     |  2 +-
 arch/arm/plat-omap/common.c                  |  4 ++--
 arch/arm/plat-orion/time.c                   |  2 +-
 arch/avr32/kernel/time.c                     |  2 +-
 arch/blackfin/kernel/time-ts.c               | 12 ++++++------
 arch/ia64/kernel/cyclone.c                   |  2 +-
 arch/ia64/kernel/time.c                      |  4 ++--
 arch/ia64/sn/kernel/sn2/timer.c              |  2 +-
 arch/m68knommu/platform/68328/timers.c       |  2 +-
 arch/m68knommu/platform/coldfire/dma_timer.c |  2 +-
 arch/m68knommu/platform/coldfire/pit.c       |  2 +-
 arch/m68knommu/platform/coldfire/timers.c    |  2 +-
 arch/mips/kernel/cevt-txx9.c                 |  2 +-
 arch/mips/kernel/csrc-bcm1480.c              |  2 +-
 arch/mips/kernel/csrc-ioasic.c               |  6 +++---
 arch/mips/kernel/csrc-r4k.c                  |  2 +-
 arch/mips/kernel/csrc-sb1250.c               |  2 +-
 arch/mips/kernel/i8253.c                     |  2 +-
 arch/mips/nxp/pnx8550/common/time.c          |  2 +-
 arch/mips/sgi-ip27/ip27-timer.c              |  2 +-
 arch/powerpc/kernel/time.c                   |  8 ++++----
 arch/s390/kernel/time.c                      |  2 +-
 arch/sh/kernel/time_32.c                     |  2 +-
 arch/sh/kernel/timers/timer-tmu.c            |  2 +-
 arch/sparc/kernel/time_64.c                  |  7 ++++++-
 arch/um/kernel/time.c                        |  2 +-
 arch/x86/kernel/hpet.c                       |  6 +++---
 arch/x86/kernel/i8253.c                      |  2 +-
 arch/x86/kernel/kvmclock.c                   |  7 ++++++-
 arch/x86/kernel/tsc.c                        |  2 +-
 arch/x86/kernel/vmiclock_32.c                |  2 +-
 arch/x86/lguest/boot.c                       |  2 +-
 arch/x86/xen/time.c                          |  7 ++++++-
 drivers/char/hpet.c                          |  2 +-
 drivers/clocksource/acpi_pm.c                | 12 ++++++------
 drivers/clocksource/cyclone.c                |  2 +-
 drivers/clocksource/scx200_hrt.c             |  2 +-
 drivers/clocksource/tcb_clksrc.c             |  2 +-
 include/linux/clocksource.h                  |  6 +++---
 kernel/time/clocksource.c                    |  8 ++++----
 kernel/time/jiffies.c                        |  2 +-
 54 files changed, 94 insertions(+), 79 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 1ff1bda0a89..309f3511aa2 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -85,7 +85,7 @@ static struct irqaction at91rm9200_timer_irq = {
 	.handler	= at91rm9200_timer_interrupt
 };
 
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
 }
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index b63e1d5f1ba..4bd56aee437 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -31,7 +31,7 @@ static u32 pit_cnt;		/* access only w/system irq blocked */
  * Clocksource:  just a monotonic counter of MCK/16 cycles.
  * We don't care whether or not PIT irqs are enabled.
  */
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 elapsed;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index f8bcd29d17a..6c227d4ba99 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -238,7 +238,7 @@ static void __init timer_init(void)
 /*
  * clocksource
  */
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
 {
 	struct timer_s *t = &timers[TID_CLOCKSOURCE];
 
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index aff0ebcfa84..5aef18b599e 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -73,7 +73,7 @@ static void __init imx_timer_hardware_init(void)
 	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
 }
 
-cycle_t imx_get_cycles(void)
+cycle_t imx_get_cycles(struct clocksource *cs)
 {
 	return IMX_TCN(TIMER_BASE);
 }
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f4656d2ac8a..1e93dfee754 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -401,7 +401,7 @@ void __init ixp4xx_sys_init(void)
 /*
  * clocksource
  */
-cycle_t ixp4xx_get_cycles(void)
+cycle_t ixp4xx_get_cycles(struct clocksource *cs)
 {
 	return *IXP4XX_OSTS;
 }
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 444d9c0f5ca..4855b8ca510 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -57,12 +57,12 @@ static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static cycle_t msm_gpt_read(void)
+static cycle_t msm_gpt_read(struct clocksource *cs)
 {
 	return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
 }
 
-static cycle_t msm_dgt_read(void)
+static cycle_t msm_dgt_read(struct clocksource *cs)
 {
 	return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
 }
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index f201fddb594..82801dbf057 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -104,7 +104,7 @@ static struct irqaction netx_timer_irq = {
 	.handler	= netx_timer_interrupt,
 };
 
-cycle_t netx_get_cycles(void)
+cycle_t netx_get_cycles(struct clocksource *cs)
 {
 	return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
 }
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 41df6972176..77281260358 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -25,7 +25,7 @@
 #define TIMER_CLOCKEVENT 1
 static u32 latch;
 
-static cycle_t ns9360_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(struct clocksource *cs)
 {
 	return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
 }
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 495a32c287b..4d56408d3cf 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -198,7 +198,7 @@ static struct irqaction omap_mpu_timer2_irq = {
 	.handler	= omap_mpu_timer2_interrupt,
 };
 
-static cycle_t mpu_read(void)
+static cycle_t mpu_read(struct clocksource *cs)
 {
 	return ~omap_mpu_timer_read(1);
 }
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 9fc13a2cc3f..1cb2c0909c2 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -138,7 +138,7 @@ static inline void __init omap2_gp_clocksource_init(void) {}
  * clocksource
  */
 static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(void)
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
 }
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 8eb3830fbb0..750c448db67 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -125,7 +125,7 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
 	.set_mode	= pxa_osmr0_set_mode,
 };
 
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
 {
 	return OSCR;
 }
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ab947c14f2..942e1a7eb9b 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -715,7 +715,7 @@ static struct irqaction realview_timer_irq = {
 	.handler	= realview_timer_interrupt,
 };
 
-static cycle_t realview_get_cycles(void)
+static cycle_t realview_get_cycles(struct clocksource *cs)
 {
 	return ~readl(timer3_va_base + TIMER_VALUE);
 }
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 565776680d8..1f929c391af 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -948,7 +948,7 @@ static struct irqaction versatile_timer_irq = {
 	.handler	= versatile_timer_interrupt,
 };
 
-static cycle_t versatile_get_cycles(void)
+static cycle_t versatile_get_cycles(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index ef1b3cd85bd..dab3357196f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -36,7 +36,7 @@ static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
 /* clock source */
 
-static cycle_t mxc_get_cycles(void)
+static cycle_t mxc_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(TIMER_BASE + MXC_TCN);
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index d1797147732..433021f3d7c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -185,7 +185,7 @@ console_initcall(omap_add_serial_console);
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(void)
+static cycle_t omap_32k_read(struct clocksource *cs)
 {
 	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
@@ -207,7 +207,7 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read();
+	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 6fa2923e6dc..2faf9dba4ef 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -41,7 +41,7 @@ static u32 ticks_per_jiffy;
 /*
  * Clocksource handling.
  */
-static cycle_t orion_clksrc_read(void)
+static cycle_t orion_clksrc_read(struct clocksource *cs)
 {
 	return 0xffffffff - readl(TIMER0_VAL);
 }
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 0ff46bf873b..f27aa3b259f 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -18,7 +18,7 @@
 #include <mach/pm.h>
 
 
-static cycle_t read_cycle_count(void)
+static cycle_t read_cycle_count(struct clocksource *cs)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 0ed2badfd74..27646121280 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -58,16 +58,11 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
-unsigned long long sched_clock(void)
-{
-	return cycles_2_ns(read_cycles());
-}
-
 static struct clocksource clocksource_bfin = {
 	.name		= "bfin_cycles",
 	.rating		= 350,
@@ -77,6 +72,11 @@ static struct clocksource clocksource_bfin = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+unsigned long long sched_clock(void)
+{
+	return cycles_2_ns(read_cycles(&clocksource_bfin));
+}
+
 static int __init bfin_clocksource_init(void)
 {
 	set_cyc2ns_scale(get_cclk() / 1000);
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 790ef0d87e1..71e35864d2e 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -21,7 +21,7 @@ void __init cyclone_setup(void)
 
 static void __iomem *cyclone_mc;
 
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
 {
 	return (cycle_t)readq((void __iomem *)cyclone_mc);
 }
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 641c8b61c4f..604c1a35db3 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -33,7 +33,7 @@
 
 #include "fsyscall_gtod_data.h"
 
-static cycle_t itc_get_cycles(void);
+static cycle_t itc_get_cycles(struct clocksource *cs);
 
 struct fsyscall_gtod_data_t fsyscall_gtod_data = {
 	.lock = SEQLOCK_UNLOCKED,
@@ -383,7 +383,7 @@ ia64_init_itm (void)
 	}
 }
 
-static cycle_t itc_get_cycles(void)
+static cycle_t itc_get_cycles(struct clocksource *cs)
 {
 	u64 lcycle, now, ret;
 
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index cf67fc56205..21d6f09e344 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -23,7 +23,7 @@
 
 extern unsigned long sn_rtc_cycles_per_second;
 
-static cycle_t read_sn2(void)
+static cycle_t read_sn2(struct clocksource *cs)
 {
 	return (cycle_t)readq(RTC_COUNTER_ADDR);
 }
diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c
index 6bafefa546e..309f725995b 100644
--- a/arch/m68knommu/platform/68328/timers.c
+++ b/arch/m68knommu/platform/68328/timers.c
@@ -75,7 +75,7 @@ static struct irqaction m68328_timer_irq = {
 
 /***************************************************************************/
 
-static cycle_t m68328_read_clk(void)
+static cycle_t m68328_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 cycles;
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
index 772578b1084..a5f562823d7 100644
--- a/arch/m68knommu/platform/coldfire/dma_timer.c
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -34,7 +34,7 @@
 #define DMA_DTMR_CLK_DIV_16	(2 << 1)
 #define DMA_DTMR_ENABLE		(1 << 0)
 
-static cycle_t cf_dt_get_cycles(void)
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(DTCN0);
 }
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 2a12e7fa974..61b96211f8f 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -125,7 +125,7 @@ static struct irqaction pit_irq = {
 
 /***************************************************************************/
 
-static cycle_t pit_read_clk(void)
+static cycle_t pit_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 cycles;
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index 454f2549349..1ba8a373165 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -78,7 +78,7 @@ static struct irqaction mcftmr_timer_irq = {
 
 /***************************************************************************/
 
-static cycle_t mcftmr_read_clk(void)
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 cycles;
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index eccf7d6096b..2e911e3da8d 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -22,7 +22,7 @@
 
 static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
 
-static cycle_t txx9_cs_read(void)
+static cycle_t txx9_cs_read(struct clocksource *cs)
 {
 	return __raw_readl(&txx9_cs_tmrptr->trr);
 }
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 868745e7184..51489f8a825 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -28,7 +28,7 @@
 
 #include <asm/sibyte/sb1250.h>
 
-static cycle_t bcm1480_hpt_read(void)
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
 {
 	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
 }
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 1d5f63cf899..b551f48d3a0 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -25,7 +25,7 @@
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 
-static cycle_t dec_ioasic_hpt_read(void)
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
 {
 	return ioasic_read(IO_REG_FCTR);
 }
@@ -47,13 +47,13 @@ void __init dec_ioasic_clocksource_init(void)
 	while (!ds1287_timer_state())
 		;
 
-	start = dec_ioasic_hpt_read();
+	start = dec_ioasic_hpt_read(&clocksource_dec);
 
 	while (i--)
 		while (!ds1287_timer_state())
 			;
 
-	end = dec_ioasic_hpt_read();
+	end = dec_ioasic_hpt_read(&clocksource_dec);
 
 	freq = (end - start) * 10;
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index f1a2893931e..e95a3cd48ee 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -10,7 +10,7 @@
 
 #include <asm/time.h>
 
-static cycle_t c0_hpt_read(void)
+static cycle_t c0_hpt_read(struct clocksource *cs)
 {
 	return read_c0_count();
 }
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index 92212bbb8e4..d14d3d1907f 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -33,7 +33,7 @@
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
  */
-static cycle_t sb1250_hpt_read(void)
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
 {
 	unsigned int count;
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 689719e34f0..ed20e7fe65e 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -128,7 +128,7 @@ void __init setup_pit_timer(void)
  * to just read by itself. So use jiffies to emulate a free
  * running counter:
  */
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
 {
 	unsigned long flags;
 	int count;
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index cf293b27909..8df43e9e4d9 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -35,7 +35,7 @@
 
 static unsigned long cpj;
 
-static cycle_t hpt_read(void)
+static cycle_t hpt_read(struct clocksource *cs)
 {
 	return read_c0_count2();
 }
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index f024057a35f..f10a7cd64f7 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -159,7 +159,7 @@ static void __init hub_rt_clock_event_global_init(void)
 	setup_irq(irq, &hub_rt_irqaction);
 }
 
-static cycle_t hub_rt_read(void)
+static cycle_t hub_rt_read(struct clocksource *cs)
 {
 	return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 926ea864e34..48571ac56fb 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -77,7 +77,7 @@
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 
-static cycle_t rtc_read(void);
+static cycle_t rtc_read(struct clocksource *);
 static struct clocksource clocksource_rtc = {
 	.name         = "rtc",
 	.rating       = 400,
@@ -88,7 +88,7 @@ static struct clocksource clocksource_rtc = {
 	.read         = rtc_read,
 };
 
-static cycle_t timebase_read(void);
+static cycle_t timebase_read(struct clocksource *);
 static struct clocksource clocksource_timebase = {
 	.name         = "timebase",
 	.rating       = 400,
@@ -766,12 +766,12 @@ unsigned long read_persistent_clock(void)
 }
 
 /* clocksource code */
-static cycle_t rtc_read(void)
+static cycle_t rtc_read(struct clocksource *cs)
 {
 	return (cycle_t)get_rtc();
 }
 
-static cycle_t timebase_read(void)
+static cycle_t timebase_read(struct clocksource *cs)
 {
 	return (cycle_t)get_tb();
 }
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 6ded50dfa75..ef596d02057 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -201,7 +201,7 @@ unsigned long read_persistent_clock(void)
 	return ts.tv_sec;
 }
 
-static cycle_t read_tod_clock(void)
+static cycle_t read_tod_clock(struct clocksource *cs)
 {
 	return get_clock();
 }
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index c34e1e0f9b0..1700d2465f6 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -208,7 +208,7 @@ unsigned long long sched_clock(void)
 	if (!clocksource_sh.rating)
 		return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
 
-	cycles = clocksource_sh.read();
+	cycles = clocksource_sh.read(&clocksource_sh);
 	return cyc2ns(&clocksource_sh, cycles);
 }
 #endif
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index c5d3396f596..fe8d8930ccb 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -81,7 +81,7 @@ static int tmu_timer_stop(void)
  */
 static int tmus_are_scaled;
 
-static cycle_t tmu_timer_read(void)
+static cycle_t tmu_timer_read(struct clocksource *cs)
 {
 	return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
 }
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index db310aa0018..5c12e79b4bd 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -814,6 +814,11 @@ void udelay(unsigned long usecs)
 }
 EXPORT_SYMBOL(udelay);
 
+static cycle_t clocksource_tick_read(struct clocksource *cs)
+{
+	return tick_ops->get_tick();
+}
+
 void __init time_init(void)
 {
 	unsigned long freq = sparc64_init_timers();
@@ -827,7 +832,7 @@ void __init time_init(void)
 	clocksource_tick.mult =
 		clocksource_hz2mult(freq,
 				    clocksource_tick.shift);
-	clocksource_tick.read = tick_ops->get_tick;
+	clocksource_tick.read = clocksource_tick_read;
 
 	printk("clocksource: mult[%x] shift[%d]\n",
 	       clocksource_tick.mult, clocksource_tick.shift);
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index b13a87a3ec9..c8b9c469fcd 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -65,7 +65,7 @@ static irqreturn_t um_timer(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static cycle_t itimer_read(void)
+static cycle_t itimer_read(struct clocksource *cs)
 {
 	return os_nsecs() / 1000;
 }
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 648b3a2a3a4..3f0019e0a22 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -722,7 +722,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
 /*
  * Clock source related code
  */
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
 {
 	return (cycle_t)hpet_readl(HPET_COUNTER);
 }
@@ -756,7 +756,7 @@ static int hpet_clocksource_register(void)
 	hpet_restart_counter();
 
 	/* Verify whether hpet counter works */
-	t1 = read_hpet();
+	t1 = hpet_readl(HPET_COUNTER);
 	rdtscll(start);
 
 	/*
@@ -770,7 +770,7 @@ static int hpet_clocksource_register(void)
 		rdtscll(now);
 	} while ((now - start) < 200000UL);
 
-	if (t1 == read_hpet()) {
+	if (t1 == hpet_readl(HPET_COUNTER)) {
 		printk(KERN_WARNING
 		       "HPET counter not counting. HPET disabled\n");
 		return -ENODEV;
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 3475440baa5..c2e0bb0890d 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -129,7 +129,7 @@ void __init setup_pit_timer(void)
  * to just read by itself. So use jiffies to emulate a free
  * running counter:
  */
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
 {
 	static int old_count;
 	static u32 old_jifs;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 137f2e8132d..223af43f152 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -77,6 +77,11 @@ static cycle_t kvm_clock_read(void)
 	return ret;
 }
 
+static cycle_t kvm_clock_get_cycles(struct clocksource *cs)
+{
+	return kvm_clock_read();
+}
+
 /*
  * If we don't do that, there is the possibility that the guest
  * will calibrate under heavy load - thus, getting a lower lpj -
@@ -107,7 +112,7 @@ static void kvm_get_preset_lpj(void)
 
 static struct clocksource kvm_clock = {
 	.name = "kvm-clock",
-	.read = kvm_clock_read,
+	.read = kvm_clock_get_cycles,
 	.rating = 400,
 	.mask = CLOCKSOURCE_MASK(64),
 	.mult = 1 << KVM_SCALE,
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 7a567ebe636..d57de05dc43 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -699,7 +699,7 @@ static struct clocksource clocksource_tsc;
  * code, which is necessary to support wrapping clocksources like pm
  * timer.
  */
-static cycle_t read_tsc(void)
+static cycle_t read_tsc(struct clocksource *cs)
 {
 	cycle_t ret = (cycle_t)get_cycles();
 
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index d303369a7ba..2b3eb82efee 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -283,7 +283,7 @@ void __devinit vmi_time_ap_init(void)
 /** vmi clocksource */
 static struct clocksource clocksource_vmi;
 
-static cycle_t read_real_cycles(void)
+static cycle_t read_real_cycles(struct clocksource *cs)
 {
 	cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
 	return max(ret, clocksource_vmi.cycle_last);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a2085368a3d..ca7ec44bafc 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -663,7 +663,7 @@ static unsigned long lguest_tsc_khz(void)
 
 /* If we can't use the TSC, the kernel falls back to our lower-priority
  * "lguest_clock", where we read the time value given to us by the Host. */
-static cycle_t lguest_clock_read(void)
+static cycle_t lguest_clock_read(struct clocksource *cs)
 {
 	unsigned long sec, nsec;
 
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 14f24062349..0a5aa44299a 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -213,6 +213,11 @@ cycle_t xen_clocksource_read(void)
 	return ret;
 }
 
+static cycle_t xen_clocksource_get_cycles(struct clocksource *cs)
+{
+	return xen_clocksource_read();
+}
+
 static void xen_read_wallclock(struct timespec *ts)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
@@ -241,7 +246,7 @@ int xen_set_wallclock(unsigned long now)
 static struct clocksource xen_clocksource __read_mostly = {
 	.name = "xen",
 	.rating = 400,
-	.read = xen_clocksource_read,
+	.read = xen_clocksource_get_cycles,
 	.mask = ~0,
 	.mult = 1<<XEN_SHIFT,		/* time directly in nanoseconds */
 	.shift = XEN_SHIFT,
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 50dfa3bc71c..340ba4f9dc5 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -72,7 +72,7 @@ static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ;
 #ifdef CONFIG_IA64
 static void __iomem *hpet_mctr;
 
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
 {
 	return (cycle_t)read_counter((void __iomem *)hpet_mctr);
 }
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index ee19b6e8fcb..40bd8c61c7d 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -57,7 +57,7 @@ u32 acpi_pm_read_verified(void)
 	return v2;
 }
 
-static cycle_t acpi_pm_read(void)
+static cycle_t acpi_pm_read(struct clocksource *cs)
 {
 	return (cycle_t)read_pmtmr();
 }
@@ -83,7 +83,7 @@ static int __init acpi_pm_good_setup(char *__str)
 }
 __setup("acpi_pm_good", acpi_pm_good_setup);
 
-static cycle_t acpi_pm_read_slow(void)
+static cycle_t acpi_pm_read_slow(struct clocksource *cs)
 {
 	return (cycle_t)acpi_pm_read_verified();
 }
@@ -156,9 +156,9 @@ static int verify_pmtmr_rate(void)
 	unsigned long count, delta;
 
 	mach_prepare_counter();
-	value1 = clocksource_acpi_pm.read();
+	value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 	mach_countup(&count);
-	value2 = clocksource_acpi_pm.read();
+	value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 	delta = (value2 - value1) & ACPI_PM_MASK;
 
 	/* Check that the PMTMR delta is within 5% of what we expect */
@@ -195,9 +195,9 @@ static int __init init_acpi_pm_clocksource(void)
 	/* "verify" this timing source: */
 	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
 		udelay(100 * j);
-		value1 = clocksource_acpi_pm.read();
+		value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 		for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
-			value2 = clocksource_acpi_pm.read();
+			value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 			if (value2 == value1)
 				continue;
 			if (value2 > value1)
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 8615059a872..64e528e8bfa 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -19,7 +19,7 @@
 int use_cyclone = 0;
 static void __iomem *cyclone_ptr;
 
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
 {
 	return (cycle_t)readl(cyclone_ptr);
 }
diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
index b92da677aa5..27f4d9637b6 100644
--- a/drivers/clocksource/scx200_hrt.c
+++ b/drivers/clocksource/scx200_hrt.c
@@ -43,7 +43,7 @@ MODULE_PARM_DESC(ppm, "+-adjust to actual XO freq (ppm)");
 /* The base timer frequency, * 27 if selected */
 #define HRT_FREQ   1000000
 
-static cycle_t read_hrt(void)
+static cycle_t read_hrt(struct clocksource *cs)
 {
 	/* Read the timer value */
 	return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 254f1064d97..01b886e6882 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -39,7 +39,7 @@
 
 static void __iomem *tcaddr;
 
-static cycle_t tc_get_cycles(void)
+static cycle_t tc_get_cycles(struct clocksource *cs)
 {
 	unsigned long	flags;
 	u32		lower, upper;
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 573819ef4cc..0d96cde9ee5 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -143,7 +143,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
  *			400-499: Perfect
  *				The ideal clocksource. A must-use where
  *				available.
- * @read:		returns a cycle value
+ * @read:		returns a cycle value, passes clocksource as argument
  * @mask:		bitmask for two's complement
  *			subtraction of non 64 bit counters
  * @mult:		cycle to nanosecond multiplier (adjusted by NTP)
@@ -162,7 +162,7 @@ struct clocksource {
 	char *name;
 	struct list_head list;
 	int rating;
-	cycle_t (*read)(void);
+	cycle_t (*read)(struct clocksource *cs);
 	cycle_t mask;
 	u32 mult;
 	u32 mult_orig;
@@ -271,7 +271,7 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
  */
 static inline cycle_t clocksource_read(struct clocksource *cs)
 {
-	return cs->read();
+	return cs->read(cs);
 }
 
 /**
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c46c931a7fe..ecfd7b5187e 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -181,12 +181,12 @@ static void clocksource_watchdog(unsigned long data)
 
 	resumed = test_and_clear_bit(0, &watchdog_resumed);
 
-	wdnow = watchdog->read();
+	wdnow = watchdog->read(watchdog);
 	wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
 	watchdog_last = wdnow;
 
 	list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
-		csnow = cs->read();
+		csnow = cs->read(cs);
 
 		if (unlikely(resumed)) {
 			cs->wd_last = csnow;
@@ -247,7 +247,7 @@ static void clocksource_check_watchdog(struct clocksource *cs)
 
 		list_add(&cs->wd_list, &watchdog_list);
 		if (!started && watchdog) {
-			watchdog_last = watchdog->read();
+			watchdog_last = watchdog->read(watchdog);
 			watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
 			add_timer_on(&watchdog_timer,
 				     cpumask_first(cpu_online_mask));
@@ -268,7 +268,7 @@ static void clocksource_check_watchdog(struct clocksource *cs)
 				cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
 			/* Start if list is not empty */
 			if (!list_empty(&watchdog_list)) {
-				watchdog_last = watchdog->read();
+				watchdog_last = watchdog->read(watchdog);
 				watchdog_timer.expires =
 					jiffies + WATCHDOG_INTERVAL;
 				add_timer_on(&watchdog_timer,
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 06f197560f3..c3f6c30816e 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -50,7 +50,7 @@
  */
 #define JIFFIES_SHIFT	8
 
-static cycle_t jiffies_read(void)
+static cycle_t jiffies_read(struct clocksource *cs)
 {
 	return (cycle_t) jiffies;
 }
-- 
GitLab


From 4614e6adafa2c5e6c3a9c245af2807fa7bc5117a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 21 Apr 2009 12:24:02 -0700
Subject: [PATCH 0605/1421] clocksource: add enable() and disable() callbacks

Add enable() and disable() callbacks for clocksources.

This allows us to put unused clocksources in power save mode.  The
functions clocksource_enable() and clocksource_disable() wrap the
callbacks and are inserted in the timekeeping code to enable before use
and disable after switching to a new clocksource.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/clocksource.h | 31 +++++++++++++++++++++++++++++++
 kernel/time/timekeeping.c   | 12 +++++++++---
 2 files changed, 40 insertions(+), 3 deletions(-)

diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 0d96cde9ee5..5a40d14daa9 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -144,6 +144,8 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
  *				The ideal clocksource. A must-use where
  *				available.
  * @read:		returns a cycle value, passes clocksource as argument
+ * @enable:		optional function to enable the clocksource
+ * @disable:		optional function to disable the clocksource
  * @mask:		bitmask for two's complement
  *			subtraction of non 64 bit counters
  * @mult:		cycle to nanosecond multiplier (adjusted by NTP)
@@ -163,6 +165,8 @@ struct clocksource {
 	struct list_head list;
 	int rating;
 	cycle_t (*read)(struct clocksource *cs);
+	int (*enable)(struct clocksource *cs);
+	void (*disable)(struct clocksource *cs);
 	cycle_t mask;
 	u32 mult;
 	u32 mult_orig;
@@ -274,6 +278,33 @@ static inline cycle_t clocksource_read(struct clocksource *cs)
 	return cs->read(cs);
 }
 
+/**
+ * clocksource_enable: - enable clocksource
+ * @cs:		pointer to clocksource
+ *
+ * Enables the specified clocksource. The clocksource callback
+ * function should start up the hardware and setup mult and field
+ * members of struct clocksource to reflect hardware capabilities.
+ */
+static inline int clocksource_enable(struct clocksource *cs)
+{
+	return cs->enable ? cs->enable(cs) : 0;
+}
+
+/**
+ * clocksource_disable: - disable clocksource
+ * @cs:		pointer to clocksource
+ *
+ * Disables the specified clocksource. The clocksource callback
+ * function should power down the now unused hardware block to
+ * save power.
+ */
+static inline void clocksource_disable(struct clocksource *cs)
+{
+	if (cs->disable)
+		cs->disable(cs);
+}
+
 /**
  * cyc2ns - converts clocksource cycles to nanoseconds
  * @cs:		Pointer to clocksource
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 900f1b6598d..687dff49f6e 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -182,7 +182,7 @@ EXPORT_SYMBOL(do_settimeofday);
  */
 static void change_clocksource(void)
 {
-	struct clocksource *new;
+	struct clocksource *new, *old;
 
 	new = clocksource_get_next();
 
@@ -191,11 +191,16 @@ static void change_clocksource(void)
 
 	clocksource_forward_now();
 
-	new->raw_time = clock->raw_time;
+	if (clocksource_enable(new))
+		return;
 
+	new->raw_time = clock->raw_time;
+	old = clock;
 	clock = new;
+	clocksource_disable(old);
+
 	clock->cycle_last = 0;
-	clock->cycle_last = clocksource_read(new);
+	clock->cycle_last = clocksource_read(clock);
 	clock->error = 0;
 	clock->xtime_nsec = 0;
 	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -292,6 +297,7 @@ void __init timekeeping_init(void)
 	ntp_init();
 
 	clock = clocksource_get_next();
+	clocksource_enable(clock);
 	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
 	clock->cycle_last = clocksource_read(clock);
 
-- 
GitLab


From 8b32b5d0dca2f5ab632e8bedcd57fe4c109c13fe Mon Sep 17 00:00:00 2001
From: Corey Minyard <minyard@acm.org>
Date: Tue, 21 Apr 2009 12:24:02 -0700
Subject: [PATCH 0606/1421] ipmi: fix platform return check

The wrong return value is being tested when allocating a platform device
in the IPMI SI code.  Check the right value.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e58ea4cd55c..2438fdf889b 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2863,7 +2863,7 @@ static int try_smi_init(struct smi_info *new_smi)
 		 */
 		new_smi->pdev = platform_device_alloc("ipmi_si",
 						      new_smi->intf_num);
-		if (rv) {
+		if (!new_smi->pdev) {
 			printk(KERN_ERR
 			       "ipmi_si_intf:"
 			       " Unable to allocate platform device\n");
-- 
GitLab


From 40112ae7504745799e75ef418057f0d2cb745050 Mon Sep 17 00:00:00 2001
From: Corey Minyard <minyard@acm.org>
Date: Tue, 21 Apr 2009 12:24:03 -0700
Subject: [PATCH 0607/1421] ipmi: test for event buffer before using

The IPMI driver would attempt to use the event buffer even if that
didn't exist on the BMC.  This patch modified the IPMI driver to check
for the event buffer's existence before trying to use it.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 148 +++++++++++++++++++++++++------
 include/linux/ipmi_msgdefs.h     |   6 ++
 2 files changed, 125 insertions(+), 29 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 2438fdf889b..259644646b8 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -82,12 +82,6 @@
 #define SI_SHORT_TIMEOUT_USEC  250 /* .25ms when the SM request a
 				      short timeout */
 
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR     0x01
-#define IPMI_BMC_EVT_MSG_INTR     0x02
-#define IPMI_BMC_EVT_MSG_BUFF     0x04
-#define IPMI_BMC_SYS_LOG          0x08
-
 enum si_intf_state {
 	SI_NORMAL,
 	SI_GETTING_FLAGS,
@@ -220,6 +214,9 @@ struct smi_info {
 			     OEM2_DATA_AVAIL)
 	unsigned char       msg_flags;
 
+	/* Does the BMC have an event buffer? */
+	char		    has_event_buffer;
+
 	/*
 	 * If set to true, this will request events the next time the
 	 * state machine is idle.
@@ -968,7 +965,8 @@ static void request_events(void *send_info)
 {
 	struct smi_info *smi_info = send_info;
 
-	if (atomic_read(&smi_info->stop_operation))
+	if (atomic_read(&smi_info->stop_operation) ||
+				!smi_info->has_event_buffer)
 		return;
 
 	atomic_set(&smi_info->req_events, 1);
@@ -2407,26 +2405,9 @@ static struct of_platform_driver ipmi_of_platform_driver = {
 };
 #endif /* CONFIG_PPC_OF */
 
-
-static int try_get_dev_id(struct smi_info *smi_info)
+static int wait_for_msg_done(struct smi_info *smi_info)
 {
-	unsigned char         msg[2];
-	unsigned char         *resp;
-	unsigned long         resp_len;
 	enum si_sm_result     smi_result;
-	int                   rv = 0;
-
-	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
-	if (!resp)
-		return -ENOMEM;
-
-	/*
-	 * Do a Get Device ID command, since it comes back with some
-	 * useful info.
-	 */
-	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
-	msg[1] = IPMI_GET_DEVICE_ID_CMD;
-	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 
 	smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
 	for (;;) {
@@ -2441,16 +2422,39 @@ static int try_get_dev_id(struct smi_info *smi_info)
 		} else
 			break;
 	}
-	if (smi_result == SI_SM_HOSED) {
+	if (smi_result == SI_SM_HOSED)
 		/*
 		 * We couldn't get the state machine to run, so whatever's at
 		 * the port is probably not an IPMI SMI interface.
 		 */
-		rv = -ENODEV;
+		return -ENODEV;
+
+	return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+	unsigned char         msg[2];
+	unsigned char         *resp;
+	unsigned long         resp_len;
+	int                   rv = 0;
+
+	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	/*
+	 * Do a Get Device ID command, since it comes back with some
+	 * useful info.
+	 */
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_GET_DEVICE_ID_CMD;
+	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+	rv = wait_for_msg_done(smi_info);
+	if (rv)
 		goto out;
-	}
 
-	/* Otherwise, we got some data. */
 	resp_len = smi_info->handlers->get_result(smi_info->si_sm,
 						  resp, IPMI_MAX_MSG_LENGTH);
 
@@ -2462,6 +2466,88 @@ static int try_get_dev_id(struct smi_info *smi_info)
 	return rv;
 }
 
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+	unsigned char         msg[3];
+	unsigned char         *resp;
+	unsigned long         resp_len;
+	int                   rv = 0;
+
+	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+	rv = wait_for_msg_done(smi_info);
+	if (rv) {
+		printk(KERN_WARNING
+		       "ipmi_si: Error getting response from get global,"
+		       " enables command, the event buffer is not"
+		       " enabled.\n");
+		goto out;
+	}
+
+	resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+						  resp, IPMI_MAX_MSG_LENGTH);
+
+	if (resp_len < 4 ||
+			resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+			resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD   ||
+			resp[2] != 0) {
+		printk(KERN_WARNING
+		       "ipmi_si: Invalid return from get global"
+		       " enables command, cannot enable the event"
+		       " buffer.\n");
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+		/* buffer is already enabled, nothing to do. */
+		goto out;
+
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+	msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+	rv = wait_for_msg_done(smi_info);
+	if (rv) {
+		printk(KERN_WARNING
+		       "ipmi_si: Error getting response from set global,"
+		       " enables command, the event buffer is not"
+		       " enabled.\n");
+		goto out;
+	}
+
+	resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+						  resp, IPMI_MAX_MSG_LENGTH);
+
+	if (resp_len < 3 ||
+			resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+			resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+		printk(KERN_WARNING
+		       "ipmi_si: Invalid return from get global,"
+		       "enables command, not enable the event"
+		       " buffer.\n");
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (resp[2] != 0)
+		/*
+		 * An error when setting the event buffer bit means
+		 * that the event buffer is not supported.
+		 */
+		rv = -ENOENT;
+ out:
+	kfree(resp);
+	return rv;
+}
+
 static int type_file_read_proc(char *page, char **start, off_t off,
 			       int count, int *eof, void *data)
 {
@@ -2847,6 +2933,10 @@ static int try_smi_init(struct smi_info *new_smi)
 	new_smi->intf_num = smi_num;
 	smi_num++;
 
+	rv = try_enable_event_buffer(new_smi);
+	if (rv == 0)
+		new_smi->has_event_buffer = 1;
+
 	/*
 	 * Start clearing the flags before we enable interrupts or the
 	 * timer to avoid racing with the timer.
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index b56a158d587..a079f586e90 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -58,6 +58,12 @@
 #define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
 #define IPMI_GET_CHANNEL_INFO_CMD	0x42
 
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR     0x01
+#define IPMI_BMC_EVT_MSG_INTR     0x02
+#define IPMI_BMC_EVT_MSG_BUFF     0x04
+#define IPMI_BMC_SYS_LOG          0x08
+
 #define IPMI_NETFN_STORAGE_REQUEST		0x0a
 #define IPMI_NETFN_STORAGE_RESPONSE		0x0b
 #define IPMI_ADD_SEL_ENTRY_CMD		0x44
-- 
GitLab


From 25176ed670121e1e0aae5c8161713c332b786538 Mon Sep 17 00:00:00 2001
From: Corey Minyard <cminyard@mvista.com>
Date: Tue, 21 Apr 2009 12:24:04 -0700
Subject: [PATCH 0608/1421] ipmi: fix statistics counting issues

Bela Lubkin noticed that the statistics for send IPMB and LAN commands
in the IPMI driver could be incremented even if an error occurred.  Move
the increments to the proper place to avoid this.

Also add some statistics for retransmissions that failed, and some little
helper functions to neaten up the code a little.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Bela Lubkin <blubkin@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_msghandler.c | 73 ++++++++++++++++++++---------
 1 file changed, 51 insertions(+), 22 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index e93fc8d22fb..83c7477ba80 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -285,6 +285,11 @@ enum ipmi_stat_indexes {
 	/* Events that were received with the proper format. */
 	IPMI_STAT_events,
 
+	/* Retransmissions on IPMB that failed. */
+	IPMI_STAT_dropped_rexmit_ipmb_commands,
+
+	/* Retransmissions on LAN that failed. */
+	IPMI_STAT_dropped_rexmit_lan_commands,
 
 	/* This *must* remain last, add new values above this. */
 	IPMI_NUM_STATS
@@ -445,6 +450,20 @@ static DEFINE_MUTEX(smi_watchers_mutex);
 #define ipmi_get_stat(intf, stat) \
 	((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat]))
 
+static int is_lan_addr(struct ipmi_addr *addr)
+{
+	return addr->addr_type == IPMI_LAN_ADDR_TYPE;
+}
+
+static int is_ipmb_addr(struct ipmi_addr *addr)
+{
+	return addr->addr_type == IPMI_IPMB_ADDR_TYPE;
+}
+
+static int is_ipmb_bcast_addr(struct ipmi_addr *addr)
+{
+	return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE;
+}
 
 static void free_recv_msg_list(struct list_head *q)
 {
@@ -601,8 +620,7 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2)
 		return (smi_addr1->lun == smi_addr2->lun);
 	}
 
-	if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
-	    || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+	if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) {
 		struct ipmi_ipmb_addr *ipmb_addr1
 		    = (struct ipmi_ipmb_addr *) addr1;
 		struct ipmi_ipmb_addr *ipmb_addr2
@@ -612,7 +630,7 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2)
 			&& (ipmb_addr1->lun == ipmb_addr2->lun));
 	}
 
-	if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
+	if (is_lan_addr(addr1)) {
 		struct ipmi_lan_addr *lan_addr1
 			= (struct ipmi_lan_addr *) addr1;
 		struct ipmi_lan_addr *lan_addr2
@@ -644,14 +662,13 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len)
 	    || (addr->channel < 0))
 		return -EINVAL;
 
-	if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
-	    || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+	if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
 		if (len < sizeof(struct ipmi_ipmb_addr))
 			return -EINVAL;
 		return 0;
 	}
 
-	if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+	if (is_lan_addr(addr)) {
 		if (len < sizeof(struct ipmi_lan_addr))
 			return -EINVAL;
 		return 0;
@@ -1503,8 +1520,7 @@ static int i_ipmi_request(ipmi_user_t          user,
 			memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
 		smi_msg->data_size = msg->data_len + 2;
 		ipmi_inc_stat(intf, sent_local_commands);
-	} else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
-		   || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+	} else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
 		struct ipmi_ipmb_addr *ipmb_addr;
 		unsigned char         ipmb_seq;
 		long                  seqid;
@@ -1583,8 +1599,6 @@ static int i_ipmi_request(ipmi_user_t          user,
 
 			spin_lock_irqsave(&(intf->seq_lock), flags);
 
-			ipmi_inc_stat(intf, sent_ipmb_commands);
-
 			/*
 			 * Create a sequence number with a 1 second
 			 * timeout and 4 retries.
@@ -1606,6 +1620,8 @@ static int i_ipmi_request(ipmi_user_t          user,
 				goto out_err;
 			}
 
+			ipmi_inc_stat(intf, sent_ipmb_commands);
+
 			/*
 			 * Store the sequence number in the message,
 			 * so that when the send message response
@@ -1635,7 +1651,7 @@ static int i_ipmi_request(ipmi_user_t          user,
 			 */
 			spin_unlock_irqrestore(&(intf->seq_lock), flags);
 		}
-	} else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+	} else if (is_lan_addr(addr)) {
 		struct ipmi_lan_addr  *lan_addr;
 		unsigned char         ipmb_seq;
 		long                  seqid;
@@ -1696,8 +1712,6 @@ static int i_ipmi_request(ipmi_user_t          user,
 
 			spin_lock_irqsave(&(intf->seq_lock), flags);
 
-			ipmi_inc_stat(intf, sent_lan_commands);
-
 			/*
 			 * Create a sequence number with a 1 second
 			 * timeout and 4 retries.
@@ -1719,6 +1733,8 @@ static int i_ipmi_request(ipmi_user_t          user,
 				goto out_err;
 			}
 
+			ipmi_inc_stat(intf, sent_lan_commands);
+
 			/*
 			 * Store the sequence number in the message,
 			 * so that when the send message response
@@ -1937,6 +1953,10 @@ static int stat_file_read_proc(char *page, char **start, off_t off,
 		       ipmi_get_stat(intf, invalid_events));
 	out += sprintf(out, "events:                      %u\n",
 		       ipmi_get_stat(intf, events));
+	out += sprintf(out, "failed rexmit LAN msgs:      %u\n",
+		       ipmi_get_stat(intf, dropped_rexmit_lan_commands));
+	out += sprintf(out, "failed rexmit IPMB msgs:     %u\n",
+		       ipmi_get_stat(intf, dropped_rexmit_ipmb_commands));
 
 	return (out - ((char *) page));
 }
@@ -3730,7 +3750,7 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		list_add_tail(&msg->link, timeouts);
 		if (ent->broadcast)
 			ipmi_inc_stat(intf, timed_out_ipmb_broadcasts);
-		else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
+		else if (is_lan_addr(&ent->recv_msg->addr))
 			ipmi_inc_stat(intf, timed_out_lan_commands);
 		else
 			ipmi_inc_stat(intf, timed_out_ipmb_commands);
@@ -3744,15 +3764,17 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		 */
 		ent->timeout = MAX_MSG_TIMEOUT;
 		ent->retries_left--;
-		if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
-			ipmi_inc_stat(intf, retransmitted_lan_commands);
-		else
-			ipmi_inc_stat(intf, retransmitted_ipmb_commands);
-
 		smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
 					    ent->seqid);
-		if (!smi_msg)
+		if (!smi_msg) {
+			if (is_lan_addr(&ent->recv_msg->addr))
+				ipmi_inc_stat(intf,
+					      dropped_rexmit_lan_commands);
+			else
+				ipmi_inc_stat(intf,
+					      dropped_rexmit_ipmb_commands);
 			return;
+		}
 
 		spin_unlock_irqrestore(&intf->seq_lock, *flags);
 
@@ -3764,10 +3786,17 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		 * resent.
 		 */
 		handlers = intf->handlers;
-		if (handlers)
+		if (handlers) {
+			if (is_lan_addr(&ent->recv_msg->addr))
+				ipmi_inc_stat(intf,
+					      retransmitted_lan_commands);
+			else
+				ipmi_inc_stat(intf,
+					      retransmitted_ipmb_commands);
+
 			intf->handlers->sender(intf->send_info,
 					       smi_msg, 0);
-		else
+		} else
 			ipmi_free_smi_msg(smi_msg);
 
 		spin_lock_irqsave(&intf->seq_lock, *flags);
-- 
GitLab


From 4dec302ff71ebf48f5784a2d2fc5e3745e6d4d52 Mon Sep 17 00:00:00 2001
From: dann frazier <dannf@hp.com>
Date: Tue, 21 Apr 2009 12:24:05 -0700
Subject: [PATCH 0609/1421] ipmi: add oem message handling

Enable userspace to receive messages that a BMC transmits using an OEM
medium.  This is used by the HP iLO2.

Based on code originally written by Patrick Schoeller.

Signed-off-by: dann frazier <dannf@hp.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_msghandler.c | 138 +++++++++++++++++++++++++++-
 include/linux/ipmi.h                |   2 +
 include/linux/ipmi_msgdefs.h        |   2 +
 3 files changed, 137 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 83c7477ba80..aa83a0865ec 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3284,6 +3284,114 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t          intf,
 	return rv;
 }
 
+/*
+ * This routine will handle "Get Message" command responses with
+ * channels that use an OEM Medium. The message format belongs to
+ * the OEM.  See IPMI 2.0 specification, Chapter 6 and
+ * Chapter 22, sections 22.6 and 22.24 for more details.
+ */
+static int handle_oem_get_msg_cmd(ipmi_smi_t          intf,
+				  struct ipmi_smi_msg *msg)
+{
+	struct cmd_rcvr       *rcvr;
+	int                   rv = 0;
+	unsigned char         netfn;
+	unsigned char         cmd;
+	unsigned char         chan;
+	ipmi_user_t           user = NULL;
+	struct ipmi_system_interface_addr *smi_addr;
+	struct ipmi_recv_msg  *recv_msg;
+
+	/*
+	 * We expect the OEM SW to perform error checking
+	 * so we just do some basic sanity checks
+	 */
+	if (msg->rsp_size < 4) {
+		/* Message not big enough, just ignore it. */
+		ipmi_inc_stat(intf, invalid_commands);
+		return 0;
+	}
+
+	if (msg->rsp[2] != 0) {
+		/* An error getting the response, just ignore it. */
+		return 0;
+	}
+
+	/*
+	 * This is an OEM Message so the OEM needs to know how
+	 * handle the message. We do no interpretation.
+	 */
+	netfn = msg->rsp[0] >> 2;
+	cmd = msg->rsp[1];
+	chan = msg->rsp[3] & 0xf;
+
+	rcu_read_lock();
+	rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
+	if (rcvr) {
+		user = rcvr->user;
+		kref_get(&user->refcount);
+	} else
+		user = NULL;
+	rcu_read_unlock();
+
+	if (user == NULL) {
+		/* We didn't find a user, just give up. */
+		ipmi_inc_stat(intf, unhandled_commands);
+
+		/*
+		 * Don't do anything with these messages, just allow
+		 * them to be freed.
+		 */
+
+		rv = 0;
+	} else {
+		/* Deliver the message to the user. */
+		ipmi_inc_stat(intf, handled_commands);
+
+		recv_msg = ipmi_alloc_recv_msg();
+		if (!recv_msg) {
+			/*
+			 * We couldn't allocate memory for the
+			 * message, so requeue it for handling
+			 * later.
+			 */
+			rv = 1;
+			kref_put(&user->refcount, free_user);
+		} else {
+			/*
+			 * OEM Messages are expected to be delivered via
+			 * the system interface to SMS software.  We might
+			 * need to visit this again depending on OEM
+			 * requirements
+			 */
+			smi_addr = ((struct ipmi_system_interface_addr *)
+				    &(recv_msg->addr));
+			smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+			smi_addr->channel = IPMI_BMC_CHANNEL;
+			smi_addr->lun = msg->rsp[0] & 3;
+
+			recv_msg->user = user;
+			recv_msg->user_msg_data = NULL;
+			recv_msg->recv_type = IPMI_OEM_RECV_TYPE;
+			recv_msg->msg.netfn = msg->rsp[0] >> 2;
+			recv_msg->msg.cmd = msg->rsp[1];
+			recv_msg->msg.data = recv_msg->msg_data;
+
+			/*
+			 * The message starts at byte 4 which follows the
+			 * the Channel Byte in the "GET MESSAGE" command
+			 */
+			recv_msg->msg.data_len = msg->rsp_size - 4;
+			memcpy(recv_msg->msg_data,
+			       &(msg->rsp[4]),
+			       msg->rsp_size - 4);
+			deliver_response(recv_msg);
+		}
+	}
+
+	return rv;
+}
+
 static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
 				     struct ipmi_smi_msg  *msg)
 {
@@ -3539,6 +3647,17 @@ static int handle_new_recv_msg(ipmi_smi_t          intf,
 			goto out;
 		}
 
+		/*
+		** We need to make sure the channels have been initialized.
+		** The channel_handler routine will set the "curr_channel"
+		** equal to or greater than IPMI_MAX_CHANNELS when all the
+		** channels for this interface have been initialized.
+		*/
+		if (intf->curr_channel < IPMI_MAX_CHANNELS) {
+			requeue = 1;     /* Just put the message back for now */
+			goto out;
+		}
+
 		switch (intf->channels[chan].medium) {
 		case IPMI_CHANNEL_MEDIUM_IPMB:
 			if (msg->rsp[4] & 0x04) {
@@ -3574,11 +3693,20 @@ static int handle_new_recv_msg(ipmi_smi_t          intf,
 			break;
 
 		default:
-			/*
-			 * We don't handle the channel type, so just
-			 * free the message.
-			 */
-			requeue = 0;
+			/* Check for OEM Channels.  Clients had better
+			   register for these commands. */
+			if ((intf->channels[chan].medium
+			     >= IPMI_CHANNEL_MEDIUM_OEM_MIN)
+			    && (intf->channels[chan].medium
+				<= IPMI_CHANNEL_MEDIUM_OEM_MAX)) {
+				requeue = handle_oem_get_msg_cmd(intf, msg);
+			} else {
+				/*
+				 * We don't handle the channel type, so just
+				 * free the message.
+				 */
+				requeue = 0;
+			}
 		}
 
 	} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 7ebdb4fb4e5..65aae34759d 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -198,6 +198,8 @@ struct kernel_ipmi_msg {
 					      response.  When you send a
 					      response message, this will
 					      be returned. */
+#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
+
 /* Note that async events and received commands do not have a completion
    code as the first byte of the incoming data, unlike a response. */
 
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index a079f586e90..df97e6e31e8 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -115,5 +115,7 @@
 #define IPMI_CHANNEL_MEDIUM_USB1	10
 #define IPMI_CHANNEL_MEDIUM_USB2	11
 #define IPMI_CHANNEL_MEDIUM_SYSINTF	12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN	0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX	0x7f
 
 #endif /* __LINUX_IPMI_MSGDEFS_H */
-- 
GitLab


From c12ddba09394c60e1120e6997794fa6ed52da884 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Tue, 21 Apr 2009 12:24:05 -0700
Subject: [PATCH 0610/1421] hugetlbfs: return negative error code for bad mount
 option

This fixes the following BUG:

  # mount -o size=MM -t hugetlbfs none /huge
  hugetlbfs: Bad value 'MM' for mount option 'size=MM'
  ------------[ cut here ]------------
  kernel BUG at fs/super.c:996!

Due to

	BUG_ON(!mnt->mnt_sb);

in vfs_kern_mount().

Also, remove unused #include <linux/quotaops.h>

Cc: William Irwin <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 23a3c76711e..153d9681192 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -26,7 +26,6 @@
 #include <linux/pagevec.h>
 #include <linux/parser.h>
 #include <linux/mman.h>
-#include <linux/quotaops.h>
 #include <linux/slab.h>
 #include <linux/dnotify.h>
 #include <linux/statfs.h>
@@ -842,7 +841,7 @@ hugetlbfs_parse_options(char *options, struct hugetlbfs_config *pconfig)
 bad_val:
  	printk(KERN_ERR "hugetlbfs: Bad value '%s' for mount option '%s'\n",
 	       args[0].from, p);
- 	return 1;
+ 	return -EINVAL;
 }
 
 static int
-- 
GitLab


From e638c1394010859a015a3b533ee452d768e62cea Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 21 Apr 2009 12:24:41 -0700
Subject: [PATCH 0611/1421] memcg: use rcu_dereference to access mm->owner

mm->owner should be accessed with rcu_dereference().

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/memcontrol.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 18146c980b6..a9e3b76aa88 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -75,7 +75,7 @@ int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
 {
 	struct mem_cgroup *mem;
 	rcu_read_lock();
-	mem = mem_cgroup_from_task((mm)->owner);
+	mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
 	rcu_read_unlock();
 	return cgroup == mem;
 }
-- 
GitLab


From aa0b8f3687f06ac0e5a2b24547fdf431e923c475 Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Tue, 21 Apr 2009 12:24:42 -0700
Subject: [PATCH 0612/1421] drivers/input/serio/hp_sdc.c: fix crash when
 removing hp_sdc module

On parisc machines, which don't have HIL, removing the hp_sdc module
panics the kernel.  Fix this by returning early in hp_sdc_exit() if no HP
SDC controller was found.

Add functionality to probe for the hp_sdc_mlc kernel module (which takes
care of the upper layer HIL functionality on parisc) after two seconds.
This is needed to get all the other HIL drivers (keyboard / mouse/ ..)
drivers automatically loaded by udev later as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Frans Pop <elendil@planet.nl>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/input/serio/hp_sdc.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index bfe49243f38..1c9410d1822 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -819,6 +819,7 @@ static const struct parisc_device_id hp_sdc_tbl[] = {
 MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
 
 static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
 
 static struct parisc_driver hp_sdc_driver = {
 	.name =		"hp_sdc",
@@ -930,8 +931,15 @@ static int __init hp_sdc_init(void)
 
 #if defined(__hppa__)
 
+static void request_module_delayed(struct work_struct *work)
+{
+	request_module("hp_sdc_mlc");
+}
+
 static int __init hp_sdc_init_hppa(struct parisc_device *d)
 {
+	int ret;
+
 	if (!d)
 		return 1;
 	if (hp_sdc.dev != NULL)
@@ -944,13 +952,26 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
 	hp_sdc.data_io		= d->hpa.start + 0x800;
 	hp_sdc.status_io	= d->hpa.start + 0x801;
 
-	return hp_sdc_init();
+	INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+	ret = hp_sdc_init();
+	/* after sucessfull initialization give SDC some time to settle
+	 * and then load the hp_sdc_mlc upper layer driver */
+	if (!ret)
+		schedule_delayed_work(&moduleloader_work,
+			msecs_to_jiffies(2000));
+
+	return ret;
 }
 
 #endif /* __hppa__ */
 
 static void hp_sdc_exit(void)
 {
+	/* do nothing if we don't have a SDC */
+	if (!hp_sdc.dev)
+		return;
+
 	write_lock_irq(&hp_sdc.lock);
 
 	/* Turn off all maskable "sub-function" irq's. */
@@ -969,6 +990,7 @@ static void hp_sdc_exit(void)
 	tasklet_kill(&hp_sdc.task);
 
 #if defined(__hppa__)
+	cancel_delayed_work_sync(&moduleloader_work);
 	if (unregister_parisc_driver(&hp_sdc_driver))
 		printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
 #endif
-- 
GitLab


From 148da331200a0df8195e10eb8a38fd77bd7003af Mon Sep 17 00:00:00 2001
From: Daniel Ribeiro <drwyrm@gmail.com>
Date: Tue, 21 Apr 2009 12:24:43 -0700
Subject: [PATCH 0613/1421] pxa2xx_spi: restore DRCMR on resume

If DMA is enabled, any spi_sync call after suspend/resume would block
forever, because DRCMR is lost on suspend.  This patch restores DRCMR to
the same values set by probe.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index c76feea5fe2..1a00b415bcc 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1700,6 +1700,13 @@ static int pxa2xx_spi_resume(struct platform_device *pdev)
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
+	if (drv_data->rx_channel != -1)
+		DRCMR(drv_data->ssp->drcmr_rx) =
+			DRCMR_MAPVLD | drv_data->rx_channel;
+	if (drv_data->tx_channel != -1)
+		DRCMR(drv_data->ssp->drcmr_tx) =
+			DRCMR_MAPVLD | drv_data->tx_channel;
+
 	/* Enable the SSP clock */
 	clk_enable(ssp->clk);
 
-- 
GitLab


From 3285821bc5850f5bb099e803a55b0fd884a153b8 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 21 Apr 2009 12:24:44 -0700
Subject: [PATCH 0614/1421] MAINTAINERS: remove include/asm-*/suspend* file
 patterns

There are no more arches with suspend support using these directories.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 --
 1 file changed, 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6baace38b24..8106118e067 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2562,7 +2562,6 @@ F:	kernel/power/
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend*.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
@@ -5404,7 +5403,6 @@ F:	kernel/power/
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend.h
 
 SVGA HANDLING
 P:	Martin Mares
-- 
GitLab


From dc8c7f8919aeb2d89247bdf302ad68b569a2b1e2 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 21 Apr 2009 12:24:45 -0700
Subject: [PATCH 0615/1421] MAINTAINERS: update KMEMTRACE pattern after file
 rename

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8106118e067..72485b64dab 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3339,7 +3339,7 @@ P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	Documentation/vm/kmemtrace.txt
+F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
-- 
GitLab


From 306c68aaa7c62010428196d309fda30b6bf57710 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 21 Apr 2009 12:24:46 -0700
Subject: [PATCH 0616/1421] spi: pxa2xx: limit reaches -1

On line 944 the return value of flush() is considered as a boolean,
but limit reaches -1 upon timeout which evaluates to true.

On 540, 594, 720 the same occurs for wait_ssp_rx_stall()
On 536 the same occurs for wait_dma_channel_stop()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 1a00b415bcc..885194a0741 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -213,7 +213,7 @@ static int flush(struct driver_data *drv_data)
 		while (read_SSSR(reg) & SSSR_RNE) {
 			read_SSDR(reg);
 		}
-	} while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+	} while ((read_SSSR(reg) & SSSR_BSY) && --limit);
 	write_SSSR(SSSR_ROR, reg);
 
 	return limit;
@@ -484,7 +484,7 @@ static int wait_ssp_rx_stall(void const __iomem *ioaddr)
 {
 	unsigned long limit = loops_per_jiffy << 1;
 
-	while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
 		cpu_relax();
 
 	return limit;
@@ -494,7 +494,7 @@ static int wait_dma_channel_stop(int channel)
 {
 	unsigned long limit = loops_per_jiffy << 1;
 
-	while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
 		cpu_relax();
 
 	return limit;
-- 
GitLab


From 0f249221813150b92c9d85b6bd232e7ee695ec6e Mon Sep 17 00:00:00 2001
From: Matt Mackall <mpm@selenic.com>
Date: Tue, 21 Apr 2009 12:24:47 -0700
Subject: [PATCH 0617/1421] MAINTAINERS: add Matt Mackall to embedded
 maintainers

Impact: make more work for myself

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 72485b64dab..8aa117bad16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2065,6 +2065,8 @@ F:	drivers/infiniband/hw/ehca/
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
+P:	Matt Mackall
+M:	mpm@selenic.com
 P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
-- 
GitLab


From 14fadca793e39742f442df53391cdd1437b9262f Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Tue, 21 Apr 2009 12:24:47 -0700
Subject: [PATCH 0618/1421] MAINTAINERS: add a more searchable string for the
 H8300 architecture.

Add a parenthesized string of "H8300" for more convenient searchability
in the MAINTAINERS file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8aa117bad16..cb9571042f2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5638,7 +5638,7 @@ L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 F:	arch/m68knommu/
 
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
 P:	Yoshinori Sato
 M:	ysato@users.sourceforge.jp
 W:	http://uclinux-h8.sourceforge.jp/
-- 
GitLab


From 6e538aaf50ae782a890cbc02c27950448d8193e1 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 21 Apr 2009 12:24:49 -0700
Subject: [PATCH 0619/1421] spi: documentation: emphasise spi_master.setup()
 semantics

This is a doc-only patch which I hope will reduce the number of
spi_master controller driver patches starting out with a common
implementation bug.

(As in: almost every spi_master driver I see starts out with its
version of this bug.  Sigh.)

It just re-emphasizes that the setup() method may be called for one
device while a transfer is active on another ...  which means that most
driver implementations shouldn't touch any registers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/spi/spi-summary | 6 ++++++
 include/linux/spi/spi.h       | 7 ++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 0f5122eb282..4a02d2508bc 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -511,10 +511,16 @@ SPI MASTER METHODS
 	This sets up the device clock rate, SPI mode, and word sizes.
 	Drivers may change the defaults provided by board_info, and then
 	call spi_setup(spi) to invoke this routine.  It may sleep.
+
 	Unless each SPI slave has its own configuration registers, don't
 	change them right away ... otherwise drivers could corrupt I/O
 	that's in progress for other SPI devices.
 
+		** BUG ALERT:  for some reason the first version of
+		** many spi_master drivers seems to get this wrong.
+		** When you code setup(), ASSUME that the controller
+		** is actively processing transfers for another device.
+
     master->transfer(struct spi_device *spi, struct spi_message *message)
     	This must not sleep.  Its responsibility is arrange that the
 	transfer happens and its complete() callback is issued.  The two
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 2cc43fa380c..a0faa18f7b1 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -245,7 +245,12 @@ struct spi_master {
 	 */
 	u16			dma_alignment;
 
-	/* setup mode and clock, etc (spi driver may call many times) */
+	/* Setup mode and clock, etc (spi driver may call many times).
+	 *
+	 * IMPORTANT:  this may be called when transfers to another
+	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
+	 * which could break those transfers.
+	 */
 	int			(*setup)(struct spi_device *spi);
 
 	/* bidirectional bulk transfers
-- 
GitLab


From 6d029b645175ae71fdeedea84b246ecb1362d003 Mon Sep 17 00:00:00 2001
From: Krzysztof Halasa <khc@pm.waw.pl>
Date: Tue, 21 Apr 2009 12:24:49 -0700
Subject: [PATCH 0620/1421] rtc-cmos: fix printk output

With no IRQ available/defined, RTC-CMOS driver prints something like:
	rtc0: alarms up to one no, y3k, 114 bytes nvram
                              ^^^^
I guess the following is a bit easier to understand:
	rtc0: no alarms, y3k, 114 bytes nvram

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-cmos.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index b6d35f50e40..23e10b6263d 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -797,17 +797,15 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 		goto cleanup2;
 	}
 
-	pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
-			dev_name(&cmos_rtc.rtc->dev),
-			is_valid_irq(rtc_irq)
-				?  (cmos_rtc.mon_alrm
-					? "year"
-					: (cmos_rtc.day_alrm
-						? "month" : "day"))
-				: "no",
-			cmos_rtc.century ? ", y3k" : "",
-			nvram.size,
-			is_hpet_enabled() ? ", hpet irqs" : "");
+	pr_info("%s: %s%s, %zd bytes nvram%s\n",
+		dev_name(&cmos_rtc.rtc->dev),
+		!is_valid_irq(rtc_irq) ? "no alarms" :
+			cmos_rtc.mon_alrm ? "alarms up to one year" :
+			cmos_rtc.day_alrm ? "alarms up to one month" :
+			"alarms up to one day",
+		cmos_rtc.century ? ", y3k" : "",
+		nvram.size,
+		is_hpet_enabled() ? ", hpet irqs" : "");
 
 	return 0;
 
-- 
GitLab


From 77e38a554aae2c3cdbf852117bc09bac6f95dae1 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 21 Apr 2009 12:24:51 -0700
Subject: [PATCH 0621/1421] frv: insert PCI root bus resources for the MB93090
 devel motherboard

Insert PCI root bus resources for the FRV-based MB93090 development kit
motherboard.  This is required because the CPU's window onto the PCI bus
address space is considerably smaller than the CPU's full address space
and non-PCI devices lie outside of the PCI window that we might want to
access.

Without this patch, the PCI root bus uses the platform-level bus
resources, and these are then confined to the PCI window, thus making
platform_device_add() reject devices outside of this window.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/mb93090-mb00/pci-vdk.c | 63 ++++++++++++++++++++++++++-------
 1 file changed, 50 insertions(+), 13 deletions(-)

diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index 0f41c3a72da..c0dcec65c6b 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -30,6 +30,29 @@ int  __nongpreldata pcibios_last_bus = -1;
 struct pci_bus *__nongpreldata pci_root_bus;
 struct pci_ops *__nongpreldata pci_root_ops;
 
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+	.name	= "PCI IO",
+	.start	= 0,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+	.name	= "PCI mem",
+	.start	= 0,
+	.end	= -1,
+	.flags	= IORESOURCE_MEM,
+};
+
 /*
  * Functions for accessing PCI configuration space
  */
@@ -304,6 +327,12 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 #if 0
 	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
 #endif
+
+	if (bus->number == 0) {
+		bus->resource[0] = &pci_ioport_resource;
+		bus->resource[1] = &pci_iomem_resource;
+	}
+
 	pci_read_bridge_bases(bus);
 
 	if (bus->number == 0) {
@@ -350,28 +379,36 @@ int __init pcibios_init(void)
 	/* enable PCI arbitration */
 	__reg_MB86943_pci_arbiter	= MB86943_PCIARB_EN;
 
-	ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
-	ioport_resource.end	= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
-	ioport_resource.end	+= ioport_resource.start;
+	pci_ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+	pci_ioport_resource.end		= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+	pci_ioport_resource.end		+= pci_ioport_resource.start;
 
 	printk("PCI IO window:  %08llx-%08llx\n",
-	       (unsigned long long) ioport_resource.start,
-	       (unsigned long long) ioport_resource.end);
+	       (unsigned long long) pci_ioport_resource.start,
+	       (unsigned long long) pci_ioport_resource.end);
 
-	iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.end		= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+	pci_iomem_resource.end		+= pci_iomem_resource.start;
 
-	/* Reserve somewhere to write to flush posted writes. */
-	iomem_resource.start += 0x400;
-
-	iomem_resource.end	= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
-	iomem_resource.end	+= iomem_resource.start;
+	/* Reserve somewhere to write to flush posted writes.  This is used by
+	 * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+	 * CPU-PCI bridge to flush as this doesn't happen automatically when a
+	 * read is performed on the MB93090 development kit motherboard.
+	 */
+	pci_iomem_resource.start	+= 0x400;
 
 	printk("PCI MEM window: %08llx-%08llx\n",
-	       (unsigned long long) iomem_resource.start,
-	       (unsigned long long) iomem_resource.end);
+	       (unsigned long long) pci_iomem_resource.start,
+	       (unsigned long long) pci_iomem_resource.end);
 	printk("PCI DMA memory: %08lx-%08lx\n",
 	       dma_coherent_mem_start, dma_coherent_mem_end);
 
+	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+		panic("Unable to insert PCI IOMEM resource\n");
+	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+		panic("Unable to insert PCI IOPORT resource\n");
+
 	if (!pci_probe)
 		return -ENXIO;
 
-- 
GitLab


From 2d7197f412e75587037449960bc4c7ea06155a7f Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Tue, 21 Apr 2009 12:24:52 -0700
Subject: [PATCH 0622/1421] uml: kill a kconfig warning

Got this warning from Kconfig:

   boolean symbol INPUT tested for 'm'? test forced to 'n'

because INPUT is tristate, not bool.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/Kconfig.rest | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
index 7b5cea75a6c..0ccad0ff6d6 100644
--- a/arch/um/Kconfig.rest
+++ b/arch/um/Kconfig.rest
@@ -36,7 +36,7 @@ source "drivers/leds/Kconfig"
 
 #This is just to shut up some Kconfig warnings, so no prompt.
 config INPUT
-	bool
+	tristate
 	default n
 
 source "arch/um/Kconfig.debug"
-- 
GitLab


From e873cff0fada2b0532ca5104d5b5f5b02aa442b2 Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Tue, 21 Apr 2009 12:24:53 -0700
Subject: [PATCH 0623/1421] sgi-xp/sgi-gru: allow modules to load on non-uv
 systems

For an upcoming distro release, we need to have the xp kernel module
loadable even when not on UV equipment.  The xpc module will not load.
This will allow one set of modules dependent upon xp to work on either UV
or non-UV equipment.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-gru/grufile.c |  2 +-
 drivers/misc/sgi-xp/xp_main.c  | 12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 3e6e42d2f01..bbefe77c67a 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -375,7 +375,7 @@ static int __init gru_init(void)
 	void *gru_start_vaddr;
 
 	if (!is_uv_system())
-		return -ENODEV;
+		return 0;
 
 #if defined CONFIG_IA64
 	gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 16f8dcab2da..7896849b16d 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -248,19 +248,19 @@ xp_init(void)
 	enum xp_retval ret;
 	int ch_number;
 
+	/* initialize the connection registration mutex */
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
+		mutex_init(&xpc_registrations[ch_number].mutex);
+
 	if (is_shub())
 		ret = xp_init_sn2();
 	else if (is_uv())
 		ret = xp_init_uv();
 	else
-		ret = xpUnsupported;
+		ret = 0;
 
 	if (ret != xpSuccess)
-		return -ENODEV;
-
-	/* initialize the connection registration mutex */
-	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
-		mutex_init(&xpc_registrations[ch_number].mutex);
+		return ret;
 
 	return 0;
 }
-- 
GitLab


From b298cecb3deddf76d60022473a57f1cb776cbdcd Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@parisplace.org>
Date: Tue, 21 Apr 2009 12:24:54 -0700
Subject: [PATCH 0624/1421] scsi: mpt: suppress debugobjects warning

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133

ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276()
Hardware name: VMware Virtual Platform
Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache
Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2
Call Trace:
 [<c042c51c>] warn_slowpath+0x74/0x8a
 [<c0469600>] ? start_critical_timing+0x96/0xb7
 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
 [<c0446fad>] ? trace_hardirqs_off_caller+0x18/0xaf
 [<c044704f>] ? trace_hardirqs_off+0xb/0xd
 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
 [<c042cb84>] ? release_console_sem+0x1a5/0x1ad
 [<c05013e6>] __debug_object_init+0x1f3/0x276
 [<c0501494>] debug_object_init+0x13/0x17
 [<c0433c56>] init_timer+0x10/0x1a
 [<e08e5b54>] mpt_config+0x1c1/0x2b7 [mptbase]
 [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase]
 [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase]
 [<e08e6fa2>] mpt_do_ioc_recovery+0x950/0x1212 [mptbase]
 [<c04496c2>] ? __lock_acquire+0xa69/0xacc
 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c
 [<c060c3af>] ? _spin_unlock_irq+0x22/0x26
 [<c04f2d8b>] ? string+0x2b/0x76
 [<c04f310e>] ? vsnprintf+0x338/0x7b3
 [<c04496c2>] ? __lock_acquire+0xa69/0xacc
 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
 [<c04496c2>] ? __lock_acquire+0xa69/0xacc
 [<c044897d>] ? debug_check_no_locks_freed+0xeb/0x105
 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c
 [<c04488bc>] ? debug_check_no_locks_freed+0x2a/0x105
 [<c0446b8c>] ? lock_release_holdtime+0x43/0x48
 [<c043f742>] ? up_read+0x16/0x29
 [<c05076f8>] ? pci_get_slot+0x66/0x72
 [<e08e89ca>] mpt_attach+0x881/0x9b1 [mptbase]
 [<e091c8e5>] mptspi_probe+0x11/0x354 [mptspi]

Noticing that every caller of mpt_config has its CONFIGPARMS struct
declared on the stack and thus the &pCfg->timer is always on the stack I
changed init_timer() to init_timer_on_stack() and it seems to have shut
up.....

Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Cc: <stable@kernel.org>		[2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/message/fusion/mptbase.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d0d126c6935..5d496a99e03 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -5934,7 +5934,7 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 
 	/* Initalize the timer
 	 */
-	init_timer(&pCfg->timer);
+	init_timer_on_stack(&pCfg->timer);
 	pCfg->timer.data = (unsigned long) ioc;
 	pCfg->timer.function = mpt_timer_expired;
 	pCfg->wait_done = 0;
-- 
GitLab


From 55e5750b3e979bac853c0809ad0ef75b7cebd18c Mon Sep 17 00:00:00 2001
From: Dave Jiang <djiang@mvista.com>
Date: Tue, 21 Apr 2009 12:24:56 -0700
Subject: [PATCH 0625/1421] edac: ppc mpc85xx fix mc err detect

Error found by Jeff Haran.

The error detect register is 0s when no errors are detected.  The check
code is incorrect, so reverse check sense.

Reported-by: Jeff Haran <jharan@Brocade.COM>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/mpc85xx_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 4637a4a757d..7c8c2d72916 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -674,7 +674,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	int row_index;
 
 	err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
-	if (err_detect)
+	if (!err_detect)
 		return;
 
 	mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n",
-- 
GitLab


From 2e2e425989080cc534fc0fca154cae515f971cf5 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Tue, 21 Apr 2009 12:24:57 -0700
Subject: [PATCH 0626/1421] vmscan,memcg: reintroduce sc->may_swap

Commit a6dc60f8975ad96d162915e07703a4439c80dcf0 ("vmscan: rename
sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used
it as a flag for "we need to use swap?", as the name indicate.

And in the current implementation, memcg cannot reclaim mapped file
caches when mem+swap hits the limit.

re-introduce may_swap flag and handle it at get_scan_ratio().  This
patch doesn't influence any scan_control users other than memcg.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmscan.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 99155b7b812..eac9577941f 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -63,6 +63,9 @@ struct scan_control {
 	/* Can mapped pages be reclaimed? */
 	int may_unmap;
 
+	/* Can pages be swapped as part of reclaim? */
+	int may_swap;
+
 	/* This context's SWAP_CLUSTER_MAX. If freeing memory for
 	 * suspend, we effectively ignore SWAP_CLUSTER_MAX.
 	 * In this context, it doesn't matter that we scan the
@@ -1380,7 +1383,7 @@ static void get_scan_ratio(struct zone *zone, struct scan_control *sc,
 	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
 
 	/* If we have no swap space, do not bother scanning anon pages. */
-	if (nr_swap_pages <= 0) {
+	if (!sc->may_swap || (nr_swap_pages <= 0)) {
 		percent[0] = 0;
 		percent[1] = 100;
 		return;
@@ -1697,6 +1700,7 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
 		.may_writepage = !laptop_mode,
 		.swap_cluster_max = SWAP_CLUSTER_MAX,
 		.may_unmap = 1,
+		.may_swap = 1,
 		.swappiness = vm_swappiness,
 		.order = order,
 		.mem_cgroup = NULL,
@@ -1717,6 +1721,7 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
 	struct scan_control sc = {
 		.may_writepage = !laptop_mode,
 		.may_unmap = 1,
+		.may_swap = !noswap,
 		.swap_cluster_max = SWAP_CLUSTER_MAX,
 		.swappiness = swappiness,
 		.order = 0,
@@ -1726,9 +1731,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
 	};
 	struct zonelist *zonelist;
 
-	if (noswap)
-		sc.may_unmap = 0;
-
 	sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
 			(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
 	zonelist = NODE_DATA(numa_node_id())->node_zonelists;
@@ -1767,6 +1769,7 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order)
 	struct scan_control sc = {
 		.gfp_mask = GFP_KERNEL,
 		.may_unmap = 1,
+		.may_swap = 1,
 		.swap_cluster_max = SWAP_CLUSTER_MAX,
 		.swappiness = vm_swappiness,
 		.order = order,
@@ -2298,6 +2301,7 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 	struct scan_control sc = {
 		.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE),
 		.may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP),
+		.may_swap = 1,
 		.swap_cluster_max = max_t(unsigned long, nr_pages,
 					SWAP_CLUSTER_MAX),
 		.gfp_mask = gfp_mask,
-- 
GitLab


From daba0280fdebce0761088cf541d6e6dd7c232850 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 21 Apr 2009 12:24:58 -0700
Subject: [PATCH 0627/1421] bfin_5xx: misplaced parentheses

`!' has a higher precedence than `&', parentheses are misplaced.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/bfin_5xx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 18ba812a4f8..d86123e0339 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -166,7 +166,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
 	struct tty_struct *tty = uart->port.info->port.tty;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
 		uart->scts = 0;
 		uart_handle_cts_change(&uart->port, uart->scts);
 	}
@@ -368,7 +368,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 	struct bfin_serial_port *uart = dev_id;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
 		uart->scts = 0;
 		uart_handle_cts_change(&uart->port, uart->scts);
 	}
@@ -504,7 +504,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 	struct circ_buf *xmit = &uart->port.info->xmit;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
 		uart->scts = 0;
 		uart_handle_cts_change(&uart->port, uart->scts);
 	}
-- 
GitLab


From 778544e59857bed3f8c152e3c8755b12f7f3971f Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 15 Apr 2009 16:10:20 -0500
Subject: [PATCH 0628/1421] powerpc/85xx: Updated generic mpc85xx_defconfig

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/mpc85xx_defconfig | 213 ++++++++++---------------
 1 file changed, 88 insertions(+), 125 deletions(-)

diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index fb08819d7cc..6a3ea1aa296 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:37 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:38:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,11 +75,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,22 +105,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,10 +132,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +146,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -142,7 +159,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,11 +174,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -178,6 +189,7 @@ CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
+# CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
@@ -249,9 +261,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -278,6 +293,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -291,17 +307,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -389,6 +405,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -401,7 +418,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -456,13 +472,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -521,9 +544,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -546,6 +571,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -622,6 +648,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -655,6 +682,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -675,6 +704,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -685,11 +715,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -699,6 +731,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -708,6 +741,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -715,7 +749,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -885,12 +918,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -969,7 +999,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -978,6 +1008,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -1017,103 +1048,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1193,6 +1128,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1247,15 +1184,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1329,11 +1268,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1375,7 +1314,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1392,6 +1330,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1406,6 +1345,8 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1460,7 +1401,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
 
 #
@@ -1473,7 +1414,9 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1484,6 +1427,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1507,6 +1451,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1562,6 +1511,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1577,7 +1527,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1648,6 +1597,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1662,11 +1612,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1684,6 +1635,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1714,9 +1668,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1724,17 +1681,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1765,10 +1725,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1837,6 +1799,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
GitLab


From 8db3dca86e0a1b74b87ffb612f1e57c481a122b9 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 21 Apr 2009 15:40:51 -0500
Subject: [PATCH 0629/1421] powerpc/85xx: Enabled a bunch of FSL specific
 drivers/options

* Add new 85xx boards
* Added QE/FSL gpio
* Enabled PHY drivers that exist on various boards
* Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE)
* FSL HW Crypto Engine
* CPM I2C
* QE Serial

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/mpc85xx_defconfig | 43 ++++++++++++++++----------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 6a3ea1aa296..c162724fed4 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:38:23 2009
+# Tue Apr 21 15:40:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -189,9 +189,9 @@ CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
-# CONFIG_SOCRATES is not set
+CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
-# CONFIG_STX_GP3 is not set
+CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
 CONFIG_TQM8548=y
@@ -212,11 +212,11 @@ CONFIG_PPC_I8259=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
+CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_MPC8xxx_GPIO=y
 # CONFIG_SIMPLE_GPIO is not set
 
 #
@@ -661,11 +661,11 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
@@ -674,7 +674,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -696,7 +696,10 @@ CONFIG_MII=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -717,7 +720,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -846,14 +851,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_CPM is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
+CONFIG_SERIAL_QE=m
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -890,7 +896,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_I2C_CPM is not set
+CONFIG_I2C_CPM=m
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -1253,6 +1259,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
@@ -1597,6 +1604,9 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
 # CONFIG_BINARY_PRINTF is not set
 
 #
@@ -1719,6 +1729,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_BLKCIPHER2=y
@@ -1732,7 +1743,7 @@ CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1808,7 +1819,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
-- 
GitLab


From 3de0e075486cc1a175d63bb7167bfc66e9ac16f4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 15 Apr 2009 16:33:08 -0500
Subject: [PATCH 0630/1421] powerpc/85xx: Added SMP defconfig

Since the vast majority of 85xx platforms are UP we introduce a new SMP
config for the few platforms that have more than one core.  Beyond
CONFIG_SMP=y and its dependencies this should be identical to
mpc85xx_defconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/mpc85xx_smp_defconfig | 1829 ++++++++++++++++++++
 1 file changed, 1829 insertions(+)
 create mode 100644 arch/powerpc/configs/mpc85xx_smp_defconfig

diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
new file mode 100644
index 00000000000..1aa1c508d60
--- /dev/null
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -0,0 +1,1829 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:41:18 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
+CONFIG_KSI8560=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_SBC8548=y
+# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_MPC8xxx_GPIO=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_GIANFAR=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=m
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
-- 
GitLab


From 0658c16056660886ea2f35c4f038be70a94b1532 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 15 Apr 2009 16:48:50 -0500
Subject: [PATCH 0631/1421] powerpc/85xx: Remove defconfigs that
 mpc85xx_{smp_}defconfig cover

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 .../powerpc/configs/85xx/mpc8536_ds_defconfig | 1802 -----------------
 .../powerpc/configs/85xx/mpc8544_ds_defconfig | 1802 -----------------
 .../powerpc/configs/85xx/mpc8568mds_defconfig | 1309 ------------
 .../powerpc/configs/85xx/mpc8572_ds_defconfig | 1794 ----------------
 4 files changed, 6707 deletions(-)
 delete mode 100644 arch/powerpc/configs/85xx/mpc8536_ds_defconfig
 delete mode 100644 arch/powerpc/configs/85xx/mpc8544_ds_defconfig
 delete mode 100644 arch/powerpc/configs/85xx/mpc8568mds_defconfig
 delete mode 100644 arch/powerpc/configs/85xx/mpc8572_ds_defconfig

diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
deleted file mode 100644
index e31b6a4732e..00000000000
--- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
+++ /dev/null
@@ -1,1802 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:04 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
deleted file mode 100644
index f6fa0b761cb..00000000000
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ /dev/null
@@ -1,1802 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:07 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
deleted file mode 100644
index 186c1010a13..00000000000
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ /dev/null
@@ -1,1309 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:10 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
deleted file mode 100644
index 813223ae174..00000000000
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ /dev/null
@@ -1,1794 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:12 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
-- 
GitLab


From 5d1af5c83232c5a02b9dc0fe43053b4ddc005224 Mon Sep 17 00:00:00 2001
From: Miroslaw Walukiewicz <miroslaw.walukiewicz@intel.com>
Date: Tue, 21 Apr 2009 16:16:48 -0700
Subject: [PATCH 0632/1421] RDMA/nes: Fix resource issues in nes_create_cq()
 and nes_destroy_cq()

In error paths where a CQ is not created, pbl is not freeed properly.

In nes_destroy_cq(), add the corresponding check for nescq->mcrqf to
not call nes_free_resource() when it is already done in nes_create_cq().

Signed-off-by: Miroslaw Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_verbs.c | 26 +++++++++++++++++++++++++-
 drivers/infiniband/hw/nes/nes_verbs.h |  1 +
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 504e31d9f50..8b460c2ce89 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1627,6 +1627,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
 				nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff;
 			else
 				nescq->hw_cq.cq_number = nesvnic->mcrq_qp_id + nes_ucontext->mcrqf-1;
+			nescq->mcrqf = nes_ucontext->mcrqf;
 			nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
 		}
 		nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
@@ -1682,6 +1683,12 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
 		if (!context)
 			pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
 					nescq->hw_cq.cq_pbase);
+		else {
+			pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+					    nespbl->pbl_vbase, nespbl->pbl_pbase);
+			kfree(nespbl);
+		}
+
 		nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
 		kfree(nescq);
 		return ERR_PTR(-ENOMEM);
@@ -1705,6 +1712,11 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
 				if (!context)
 					pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
 							nescq->hw_cq.cq_pbase);
+				else {
+					pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+							    nespbl->pbl_vbase, nespbl->pbl_pbase);
+					kfree(nespbl);
+				}
 				nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
 				kfree(nescq);
 				return ERR_PTR(-ENOMEM);
@@ -1722,6 +1734,11 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
 				if (!context)
 					pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
 							nescq->hw_cq.cq_pbase);
+				else {
+					pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+							    nespbl->pbl_vbase, nespbl->pbl_pbase);
+					kfree(nespbl);
+				}
 				nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
 				kfree(nescq);
 				return ERR_PTR(-ENOMEM);
@@ -1774,6 +1791,11 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
 		if (!context)
 			pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
 					nescq->hw_cq.cq_pbase);
+		else {
+			pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+					    nespbl->pbl_vbase, nespbl->pbl_pbase);
+			kfree(nespbl);
+		}
 		nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
 		kfree(nescq);
 		return ERR_PTR(-EIO);
@@ -1855,7 +1877,9 @@ static int nes_destroy_cq(struct ib_cq *ib_cq)
 	set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX, opcode);
 	set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX,
 		(nescq->hw_cq.cq_number | ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 16)));
-	nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+	if (!nescq->mcrqf)
+		nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+
 	atomic_set(&cqp_request->refcount, 2);
 	nes_post_cqp_request(nesdev, cqp_request);
 
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index 5e48f67fbe8..41c07f29f7c 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -112,6 +112,7 @@ struct nes_cq {
 	spinlock_t       lock;
 	u8               virtual_cq;
 	u8               pad[3];
+	u32		 mcrqf;
 };
 
 struct nes_wq {
-- 
GitLab


From 0fba813748f16f4eaf24d492c505226c4026d58f Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Thu, 19 Mar 2009 05:08:43 +0800
Subject: [PATCH 0633/1421] ocfs2: Fix 2 warning during ocfs2 make.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

fs/ocfs2/dir.c: In function ‘ocfs2_extend_dir’:
fs/ocfs2/dir.c:2700: warning: ‘ret’ may be used uninitialized in this function

fs/ocfs2/suballoc.c: In function ‘ocfs2_get_suballoc_slot_bit’:
fs/ocfs2/suballoc.c:2216: warning: comparison is always true due to limited range of data type

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/dir.c      | 2 +-
 fs/ocfs2/suballoc.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 07d89204f0d..c5752305627 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2697,7 +2697,7 @@ static int ocfs2_dx_dir_index_block(struct inode *dir,
 				    u32 *num_dx_entries,
 				    struct buffer_head *dirent_bh)
 {
-	int ret, namelen, i;
+	int ret = 0, namelen, i;
 	char *de_buf, *limit;
 	struct ocfs2_dir_entry *de;
 	struct buffer_head *dx_leaf_bh;
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index b4ca5911caa..eb21dbb0ee0 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -2213,7 +2213,7 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno,
 		goto bail;
 	}
 
-	if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT &&
+	if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
 	    (u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) {
 		mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n",
 		     blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
-- 
GitLab


From 5b09b507daaa882d888b6cd78ee89ba9caace44b Mon Sep 17 00:00:00 2001
From: Joel Becker <joel.becker@oracle.com>
Date: Tue, 21 Apr 2009 16:31:20 -0700
Subject: [PATCH 0634/1421] ocfs2: Fix some printk() warnings.

The old %llu vs u64 battle.  Cast them correctly.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/export.c   |  9 +++++----
 fs/ocfs2/suballoc.c | 19 ++++++++++++-------
 2 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index de3da8eb558..15713cbb865 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -100,7 +100,8 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb,
 
 	/* If the inode allocator bit is clear, this inode must be stale */
 	if (!set) {
-		mlog(0, "inode %llu suballoc bit is clear\n", blkno);
+		mlog(0, "inode %llu suballoc bit is clear\n",
+		     (unsigned long long)blkno);
 		status = -ESTALE;
 		goto unlock_nfs_sync;
 	}
@@ -114,7 +115,7 @@ check_err:
 	if (status < 0) {
 		if (status == -ESTALE) {
 			mlog(0, "stale inode ino: %llu generation: %u\n",
-			     blkno, handle->ih_generation);
+			     (unsigned long long)blkno, handle->ih_generation);
 		}
 		result = ERR_PTR(status);
 		goto bail;
@@ -129,8 +130,8 @@ check_err:
 check_gen:
 	if (handle->ih_generation != inode->i_generation) {
 		iput(inode);
-		mlog(0, "stale inode ino: %llu generation: %u\n", blkno,
-		     handle->ih_generation);
+		mlog(0, "stale inode ino: %llu generation: %u\n",
+		     (unsigned long long)blkno, handle->ih_generation);
 		result = ERR_PTR(-ESTALE);
 		goto bail;
 	}
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index eb21dbb0ee0..8439f6b324b 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -2197,18 +2197,20 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno,
 	struct buffer_head *inode_bh = NULL;
 	struct ocfs2_dinode *inode_fe;
 
-	mlog_entry("blkno: %llu\n", blkno);
+	mlog_entry("blkno: %llu\n", (unsigned long long)blkno);
 
 	/* dirty read disk */
 	status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh);
 	if (status < 0) {
-		mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status);
+		mlog(ML_ERROR, "read block %llu failed %d\n",
+		     (unsigned long long)blkno, status);
 		goto bail;
 	}
 
 	inode_fe = (struct ocfs2_dinode *) inode_bh->b_data;
 	if (!OCFS2_IS_VALID_DINODE(inode_fe)) {
-		mlog(ML_ERROR, "invalid inode %llu requested\n", blkno);
+		mlog(ML_ERROR, "invalid inode %llu requested\n",
+		     (unsigned long long)blkno);
 		status = -EINVAL;
 		goto bail;
 	}
@@ -2216,7 +2218,8 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno,
 	if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
 	    (u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) {
 		mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n",
-		     blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
+		     (unsigned long long)blkno,
+		     (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
 		status = -EINVAL;
 		goto bail;
 	}
@@ -2251,7 +2254,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
 	u64 bg_blkno;
 	int status;
 
-	mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit);
+	mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno,
+		   (unsigned int)bit);
 
 	alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data;
 	if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) {
@@ -2266,7 +2270,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
 	status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno,
 					     &group_bh);
 	if (status < 0) {
-		mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status);
+		mlog(ML_ERROR, "read group %llu failed %d\n",
+		     (unsigned long long)bg_blkno, status);
 		goto bail;
 	}
 
@@ -2300,7 +2305,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
 	struct inode *inode_alloc_inode;
 	struct buffer_head *alloc_bh = NULL;
 
-	mlog_entry("blkno: %llu", blkno);
+	mlog_entry("blkno: %llu", (unsigned long long)blkno);
 
 	status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot,
 					     &suballoc_bit);
-- 
GitLab


From 72021788678523047161e97b3dfed695e802a5fd Mon Sep 17 00:00:00 2001
From: Zhenyu Wang <zhenyu.z.wang@intel.com>
Date: Mon, 17 Nov 2008 13:58:11 +0800
Subject: [PATCH 0635/1421] drm/i915: add support for G41 chipset

This had been delayed for some time due to failure to work on the one piece
of G41 hardware we had, and lack of success reports from anybody else.
Current hardware appears to be OK.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
[anholt: hand-applied due to conflicts with IGD patches]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 4 +++-
 include/drm/drm_pciids.h        | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d7471fe1beb..25065923b8a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -787,7 +787,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x2A42 || \
 		       (dev)->pci_device == 0x2E02 || \
 		       (dev)->pci_device == 0x2E12 || \
-		       (dev)->pci_device == 0x2E22)
+		       (dev)->pci_device == 0x2E22 || \
+		       (dev)->pci_device == 0x2E32)
 
 #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
 
@@ -796,6 +797,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
 		     (dev)->pci_device == 0x2E12 || \
 		     (dev)->pci_device == 0x2E22 || \
+		     (dev)->pci_device == 0x2E32 || \
 		     IS_GM45(dev))
 
 #define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 9477af01a63..fc55db78019 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -532,6 +532,7 @@
 	{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
 	{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
-- 
GitLab


From d816f6ac4f9877509baa3610be0d25b7afc29c00 Mon Sep 17 00:00:00 2001
From: Wu Fengguang <fengguang.wu@intel.com>
Date: Sat, 18 Apr 2009 10:43:32 +0800
Subject: [PATCH 0636/1421] drm/i915: fix unpaired i915 device mutex on entervt
 failure.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 4642115902d..ee896d91c5b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4087,8 +4087,10 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
 	dev_priv->mm.suspended = 0;
 
 	ret = i915_gem_init_ringbuffer(dev);
-	if (ret != 0)
+	if (ret != 0) {
+		mutex_unlock(&dev->struct_mutex);
 		return ret;
+	}
 
 	spin_lock(&dev_priv->mm.active_list_lock);
 	BUG_ON(!list_empty(&dev_priv->mm.active_list));
-- 
GitLab


From 355d7f370b51bbb6f31aaf9f98861057e1e6bbb2 Mon Sep 17 00:00:00 2001
From: Chris Wright <chrisw@sous-sol.org>
Date: Fri, 17 Apr 2009 01:18:55 +0000
Subject: [PATCH 0637/1421] drm/i915: fix up error path leak in i915_cmdbuffer

Commit 201361a5 introduces a leak when unwinding on error.  Reorder
unwind, and eliminate leak.

Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
[anholt: fixed uninit variable use introduced in original patch]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 272614389c0..051134c56ae 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -713,18 +713,18 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data,
 	mutex_unlock(&dev->struct_mutex);
 	if (ret) {
 		DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
-		goto fail_batch_free;
+		goto fail_clip_free;
 	}
 
 	if (sarea_priv)
 		sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
 
-fail_batch_free:
-	drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
 fail_clip_free:
 	drm_free(cliprects,
 		 cmdbuf->num_cliprects * sizeof(struct drm_clip_rect),
 		 DRM_MEM_DRIVER);
+fail_batch_free:
+	drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
 
 	return ret;
 }
-- 
GitLab


From 2a3313f494c2f3f74a27d66f0f14b38558b7dba2 Mon Sep 17 00:00:00 2001
From: "Michael K. Johnson" <johnsonm@rpath.com>
Date: Tue, 21 Apr 2009 21:44:48 -0400
Subject: [PATCH 0638/1421] x86: more than 8 32-bit CPUs requires X86_BIGSMP

$ cat x86-more-than-8-cpus-requires-bigsmp.patch

Enforce NR_CPUS <= 8 limitation if X86_BIGSMP not set

Configuring more than 8 logical CPUs on 32-bit x86 requires
X86_BIGSMP to be set in order to boot successfully, if more than 8
logical CPUs are actually found at boot time.  The X86_BIGSMP help
text describes that it is required to be set if more than 8 CPUs
are configured, but this was previously not enforced.

This configuration error has affected multiple distributions:
    https://bugzilla.redhat.com/show_bug.cgi?id=480844
    https://issues.rpath.com/browse/RPL-3022

Signed-off-by: Michael K Johnson <johnsonm@rpath.com>
LKML-Reference: <20090422014448.GB32541@logo.rdu.rpath.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c9086e6307a..b5cda6c03d1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -664,6 +664,7 @@ config MAXSMP
 
 config NR_CPUS
 	int "Maximum number of CPUs" if SMP && !MAXSMP
+	range 2 8 if SMP && X86_32 && !X86_BIGSMP
 	range 2 512 if SMP && !MAXSMP
 	default "1" if !SMP
 	default "4096" if MAXSMP
-- 
GitLab


From 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 21 Apr 2009 23:00:24 +0100
Subject: [PATCH 0639/1421] FRV: Fix the section attribute on UP
 DECLARE_PER_CPU()

In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU()
does not agree with that specified by DEFINE_PER_CPU().  This means that
architectures that have a small data section references relative to a base
register may throw up linkage errors due to too great a displacement between
where the base register points and the per-CPU variable.

On FRV, the .h declaration says that the variable is in the .sdata section, but
the .c definition says it's actually in the .data section.  The linker throws
up the following errors:

kernel/built-in.o: In function `release_task':
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o

To fix this, DECLARE_PER_CPU() should simply apply the same section attribute
as does DEFINE_PER_CPU().  However, this is made slightly more complex by
virtue of the fact that there are several variants on DEFINE, so these need to
be matched by variants on DECLARE.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/percpu.h  |  2 +-
 arch/ia64/include/asm/smp.h      |  2 +-
 arch/x86/include/asm/desc.h      |  2 +-
 arch/x86/include/asm/hardirq.h   |  2 +-
 arch/x86/include/asm/processor.h |  6 ++---
 arch/x86/include/asm/tlbflush.h  |  2 +-
 include/asm-generic/percpu.h     | 43 ++++++++++++++++++++++++++++++--
 include/linux/percpu.h           | 24 ------------------
 net/rds/rds.h                    |  2 +-
 9 files changed, 50 insertions(+), 35 deletions(-)

diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 3495e8e00d7..e9e0bb5a23b 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -73,6 +73,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#include <asm-generic/percpu.h>
 
 #endif /* __ALPHA_PERCPU_H */
diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h
index 59840833625..d217d1d4e05 100644
--- a/arch/ia64/include/asm/smp.h
+++ b/arch/ia64/include/asm/smp.h
@@ -58,7 +58,7 @@ extern struct smp_boot_data {
 extern char no_int_routing __devinitdata;
 
 extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 extern int smp_num_siblings;
 extern void __iomem *ipi_base_addr;
 extern unsigned char smp_int_redirect;
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 5623c50d67b..c45f415ce31 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -37,7 +37,7 @@ extern gate_desc idt_table[];
 struct gdt_page {
 	struct desc_struct gdt[GDT_ENTRIES];
 } __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
+DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page);
 
 static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
 {
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 039db6aa8e0..37555e52f98 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -26,7 +26,7 @@ typedef struct {
 #endif
 } ____cacheline_aligned irq_cpustat_t;
 
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 /* We can have at most NR_VECTORS irqs routed to a cpu at a time */
 #define MAX_HARDIRQS_PER_CPU NR_VECTORS
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fcf4d92e7e0..c2cceae709c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -138,7 +138,7 @@ extern struct tss_struct	doublefault_tss;
 extern __u32			cleared_cpu_caps[NCAPINTS];
 
 #ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 #define cpu_data(cpu)		per_cpu(cpu_info, cpu)
 #define current_cpu_data	__get_cpu_var(cpu_info)
 #else
@@ -270,7 +270,7 @@ struct tss_struct {
 
 } ____cacheline_aligned;
 
-DECLARE_PER_CPU(struct tss_struct, init_tss);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss);
 
 /*
  * Save the original ist values for checking stack pointers during debugging
@@ -393,7 +393,7 @@ union irq_stack_union {
 	};
 };
 
-DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union);
 DECLARE_INIT_PER_CPU(irq_stack_union);
 
 DECLARE_PER_CPU(char *, irq_stack_ptr);
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index d3539f998f8..16a5c84b032 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -152,7 +152,7 @@ struct tlb_state {
 	struct mm_struct *active_mm;
 	int state;
 };
-DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
 
 static inline void reset_lazy_tlbstate(void)
 {
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index b0e63c672eb..af47b9e1006 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -73,11 +73,50 @@ extern void setup_per_cpu_areas(void);
 
 #endif	/* SMP */
 
+#ifndef PER_CPU_BASE_SECTION
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
 #ifndef PER_CPU_ATTRIBUTES
 #define PER_CPU_ATTRIBUTES
 #endif
 
-#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
-					__typeof__(type) per_cpu_var(name)
+#define DECLARE_PER_CPU_SECTION(type, name, section)			\
+	extern \
+	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define DECLARE_PER_CPU(type, name)					\
+	DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+#define DECLARE_PER_CPU_FIRST(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
 
 #endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index cfda2d5ad31..f052d818499 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -9,30 +9,6 @@
 
 #include <asm/percpu.h>
 
-#ifndef PER_CPU_BASE_SECTION
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
-#endif
-
 #define DEFINE_PER_CPU_SECTION(type, name, section)			\
 	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
diff --git a/net/rds/rds.h b/net/rds/rds.h
index 619f0a30a4e..71794449ca4 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -638,7 +638,7 @@ struct rds_message *rds_send_get_message(struct rds_connection *,
 void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force);
 
 /* stats.c */
-DECLARE_PER_CPU(struct rds_statistics, rds_stats);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats);
 #define rds_stats_inc_which(which, member) do {		\
 	per_cpu(which, get_cpu()).member++;		\
 	put_cpu();					\
-- 
GitLab


From 5028eaa97dd1dab9cd7c30c4d38f71c708ca64bc Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 21 Apr 2009 23:00:29 +0100
Subject: [PATCH 0640/1421] PERCPU: Collect the DECLARE/DEFINE declarations
 together

Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so
that they're in one place, and give them descriptive comments, particularly
the SHARED_ALIGNED variant.

It would be nice to collect these in linux/percpu.h, but that's not possible
without sorting out the severe #include recursion between the x86 arch headers
and the general headers (and possibly other arches too).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/percpu.h | 26 +----------
 include/linux/percpu-defs.h  | 84 ++++++++++++++++++++++++++++++++++++
 include/linux/percpu.h       | 20 ---------
 3 files changed, 86 insertions(+), 44 deletions(-)
 create mode 100644 include/linux/percpu-defs.h

diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index af47b9e1006..d7d50d7ee51 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -1,13 +1,9 @@
 #ifndef _ASM_GENERIC_PERCPU_H_
 #define _ASM_GENERIC_PERCPU_H_
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
-
-/*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
+#include <linux/percpu-defs.h>
 
 #ifdef CONFIG_SMP
 
@@ -101,22 +97,4 @@ extern void setup_per_cpu_areas(void);
 #define PER_CPU_ATTRIBUTES
 #endif
 
-#define DECLARE_PER_CPU_SECTION(type, name, section)			\
-	extern \
-	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
-	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DECLARE_PER_CPU(type, name)					\
-	DECLARE_PER_CPU_SECTION(type, name, "")
-
-#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
-	____cacheline_aligned_in_smp
-
-#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)				\
-	DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
-
-#define DECLARE_PER_CPU_FIRST(type, name)				\
-	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
 #endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
new file mode 100644
index 00000000000..8f921d74f49
--- /dev/null
+++ b/include/linux/percpu-defs.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_PERCPU_DEFS_H
+#define _LINUX_PERCPU_DEFS_H
+
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+/*
+ * Base implementations of per-CPU variable declarations and definitions, where
+ * the section in which the variable is to be placed is provided by the
+ * 'section' argument.  This may be used to affect the parameters governing the
+ * variable's storage.
+ *
+ * NOTE!  The sections for the DECLARE and for the DEFINE must match, lest
+ * linkage errors occur due the compiler generating the wrong code to access
+ * that section.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, section)			\
+	extern								\
+	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define DEFINE_PER_CPU_SECTION(type, name, section)			\
+	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+/*
+ * Variant on the per-CPU variable declaration/definition theme used for
+ * ordinary per-CPU variables.
+ */
+#define DECLARE_PER_CPU(type, name)					\
+	DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DEFINE_PER_CPU(type, name)					\
+	DEFINE_PER_CPU_SECTION(type, name, "")
+
+/*
+ * Declaration/definition used for per-CPU variables that must come first in
+ * the set of variables.
+ */
+#define DECLARE_PER_CPU_FIRST(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+#define DEFINE_PER_CPU_FIRST(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be cacheline
+ * aligned under SMP conditions so that, whilst a particular instance of the
+ * data corresponds to a particular CPU, inefficiencies due to direct access by
+ * other CPUs are reduced by preventing the data from unnecessarily spanning
+ * cachelines.
+ *
+ * An example of this would be statistical data, where each CPU's set of data
+ * is updated by that CPU alone, but the data from across all CPUs is collated
+ * by a CPU processing a read from a proc file.
+ */
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+/*
+ * Declaration/definition used for per-CPU variables that must be page aligned.
+ */
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+/*
+ * Intermodule exports for per-CPU variables.
+ */
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+
+#endif /* _LINUX_PERCPU_DEFS_H */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index f052d818499..1581ff235c7 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -9,26 +9,6 @@
 
 #include <asm/percpu.h>
 
-#define DEFINE_PER_CPU_SECTION(type, name, section)			\
-	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
-	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU(type, name)					\
-	DEFINE_PER_CPU_SECTION(type, name, "")
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
-	____cacheline_aligned_in_smp
-
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
-
-#define DEFINE_PER_CPU_FIRST(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 /* enough to cover all DEFINE_PER_CPUs in modules */
 #ifdef CONFIG_MODULES
 #define PERCPU_MODULE_RESERVE		(8 << 10)
-- 
GitLab


From 5dd559f020c98a2a4b3e063f09c0e4bc771ed838 Mon Sep 17 00:00:00 2001
From: Jonathan Corbet <corbet@lwn.net>
Date: Tue, 21 Apr 2009 16:30:32 -0600
Subject: [PATCH 0641/1421] Trivial: fix a typo in slow-work.h

Fix a comment typo in slow-work.h

...a trivial mistake, but it will mess up kerneldoc if nothing else.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/slow-work.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h
index 85958277f83..b65c8881f07 100644
--- a/include/linux/slow-work.h
+++ b/include/linux/slow-work.h
@@ -67,7 +67,7 @@ static inline void slow_work_init(struct slow_work *work,
 }
 
 /**
- * slow_work_init - Initialise a very slow work item
+ * vslow_work_init - Initialise a very slow work item
  * @work: The work item to initialise
  * @ops: The operations to use to handle the slow work item
  *
-- 
GitLab


From d4d5291c8cd499b1b590336059d5cc3e24c1ced6 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Tue, 21 Apr 2009 13:32:54 -0700
Subject: [PATCH 0642/1421] driver synchronization: make scsi_wait_scan more
 advanced

There is currently only one way for userspace to say "wait for my storage
device to get ready for the modules I just loaded": to load the
scsi_wait_scan module. Expectations of userspace are that once this
module is loaded, all the (storage) devices for which the drivers
were loaded before the module load are present.

Now, there are some issues with the implementation, and the async
stuff got caught in the middle of this: The existing code only
waits for the scsy async probing to finish, but it did not take
into account at all that probing might not have begun yet.
(Russell ran into this problem on his computer and the fix works for him)

This patch fixes this more thoroughly than the previous "fix", which
had some bad side effects (namely, for kernel code that wanted to wait for
the scsi scan it would also do an async sync, which would deadlock if you did
it from async context already.. there's a report about that on lkml):
The patch makes the module first wait for all device driver probes, and then it
will wait for the scsi parallel scan to finish.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/base/dd.c             |  1 +
 drivers/scsi/scsi_scan.c      |  2 --
 drivers/scsi/scsi_wait_scan.c | 11 +++++++++++
 include/linux/device.h        |  1 +
 4 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index f17c3266a0e..742cbe6b042 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -179,6 +179,7 @@ void wait_for_device_probe(void)
 	wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
 	async_synchronize_full();
 }
+EXPORT_SYMBOL_GPL(wait_for_device_probe);
 
 /**
  * driver_probe_device - attempt to bind device & driver together
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index a14d245a66b..6f51ca485f3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -180,8 +180,6 @@ int scsi_complete_async_scans(void)
 	spin_unlock(&async_scan_lock);
 
 	kfree(data);
-	/* Synchronize async operations globally */
-	async_synchronize_full();
 	return 0;
 }
 
diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c
index 2f21af21269..74708fcaf82 100644
--- a/drivers/scsi/scsi_wait_scan.c
+++ b/drivers/scsi/scsi_wait_scan.c
@@ -11,10 +11,21 @@
  */
 
 #include <linux/module.h>
+#include <linux/device.h>
 #include <scsi/scsi_scan.h>
 
 static int __init wait_scan_init(void)
 {
+	/*
+	 * First we need to wait for device probing to finish;
+	 * the drivers we just loaded might just still be probing
+	 * and might not yet have reached the scsi async scanning
+	 */
+	wait_for_device_probe();
+	/*
+	 * and then we wait for the actual asynchronous scsi scan
+	 * to finish.
+	 */
 	scsi_complete_async_scans();
 	return 0;
 }
diff --git a/include/linux/device.h b/include/linux/device.h
index 2918c0e8fdf..6a69caaac18 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -551,6 +551,7 @@ extern int (*platform_notify_remove)(struct device *dev);
 extern struct device *get_device(struct device *dev);
 extern void put_device(struct device *dev);
 
+extern void wait_for_device_probe(void);
 
 /* drivers/base/power/shutdown.c */
 extern void device_shutdown(void);
-- 
GitLab


From 091069740304c979f957ceacec39c461d0192158 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 21 Apr 2009 20:07:00 -0700
Subject: [PATCH 0643/1421] Linux 2.6.30-rc3

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 6f4208ff2d1..9e5dc8f0ef4 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Temporary Tasmanian Devil
 
 # *DOCUMENTATION*
-- 
GitLab


From 592578a1dd1be0c940e36f769acdd3cc6651a7a1 Mon Sep 17 00:00:00 2001
From: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date: Wed, 8 Apr 2009 11:51:27 +1000
Subject: [PATCH 0644/1421] m68knommu: Fixed GPIO pin initialization for
 CONFIG_M5271 FEC.

This processor only have one FEC and its MDIO pins are
located at a different offset than the code used for
the current CONFIG_M527x.

Tesed on M5271EVB eval platform.
Without this patch the FEC driver will report no PHY attached
if the bootloader does not pre-initialize the PAR_FECI2C GPIO register.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/527x/config.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index 49343fb157b..428b15922ef 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -189,10 +189,15 @@ static void __init m527x_fec_init(void)
 	m527x_fec_irq_init(0);
 
 	/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+	v = readb(MCF_IPSBAR + 0x100047);
+	writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
 	par = readw(MCF_IPSBAR + 0x100082);
 	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
 	v = readb(MCF_IPSBAR + 0x100078);
 	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+#endif
 
 #ifdef CONFIG_FEC2
 	m527x_fec_irq_init(1);
-- 
GitLab


From a14f5e4feb3efd907df7f1b176c2367910a8e796 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 17 Apr 2009 22:55:06 +1000
Subject: [PATCH 0645/1421] m68knommu: fix missing .data.cacheline_aligned
 section

Add a .data.cacheline_aligned section to the data segment.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/vmlinux.lds.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 69ba9b10767..b7fe505e358 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -147,6 +147,8 @@ SECTIONS {
 		. = ALIGN(4);
 		_sdata = . ;
 		DATA_DATA
+		. = ALIGN(32);
+		*(.data.cacheline_aligned)
 		. = ALIGN(8192) ;
 		*(.data.init_task)
 		_edata = . ;
-- 
GitLab


From 830c072b1ea0078396c42db120452fc36516ed1d Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 17 Apr 2009 22:56:50 +1000
Subject: [PATCH 0646/1421] m68knommu: remove unused kernel stats offsets

The irq field of the kernel stats struct is not used by the assembly
support code, so remove it from the offsets.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/asm-offsets.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index c785d07c02c..f500dd6935d 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -30,9 +30,6 @@ int main(void)
 	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
 	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
 
-	/* offsets into the kernel_stat struct */
-	DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
 	/* offsets into the irq_cpustat_t struct */
 	DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
 
@@ -69,9 +66,6 @@ int main(void)
 	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
 #endif
 
-	/* offsets into the kernel_stat struct */
-	DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
 	/* signal defines */
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(SEGV_MAPERR, SEGV_MAPERR);
-- 
GitLab


From ec40f95db753d3bfdbcc43b1505ecf7980cb6492 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 17 Apr 2009 23:11:38 +1000
Subject: [PATCH 0647/1421] m68knommu: fix DMA support for ColdFire

ColdFire CPU family members support DMA (all those with the FEC ethernet
core use it, the rest have dedicated DMA engines). The code support is
just missing a handful of routines for it to be usable by drivers.
Add the missing dma_ functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/Kconfig      |  1 +
 arch/m68knommu/kernel/dma.c | 37 ++++++++++++++++++++++++++++++++++---
 2 files changed, 35 insertions(+), 3 deletions(-)

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 4beb59dfc6e..534376299a9 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -16,6 +16,7 @@ config MMU
 
 config NO_DMA
 	bool
+	depends on !COLDFIRE
 	default y
 
 config FPU
diff --git a/arch/m68knommu/kernel/dma.c b/arch/m68knommu/kernel/dma.c
index 93612580663..aaf38bbbb6c 100644
--- a/arch/m68knommu/kernel/dma.c
+++ b/arch/m68knommu/kernel/dma.c
@@ -7,10 +7,9 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
-#include <linux/string.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <asm/cacheflush.h>
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
@@ -36,7 +35,39 @@ void dma_free_coherent(struct device *dev, size_t size,
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+				size_t size, enum dma_data_direction dir)
 {
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		flush_dcache_range(handle, size);
+		break;
+	case DMA_FROM_DEVICE:
+		/* Should be clear already */
+		break;
+	default:
+		if (printk_ratelimit())
+			printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
+		break;
+	}
+}
+
+EXPORT_SYMBOL(dma_sync_single_for_device);
+dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
+			  enum dma_data_direction dir)
+{
+	dma_addr_t handle = virt_to_phys(addr);
+	flush_dcache_range(handle, size);
+	return handle;
 }
+EXPORT_SYMBOL(dma_map_single);
 
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction dir)
+{
+	dma_addr_t handle = page_to_phys(page) + offset;
+	dma_sync_single_for_device(dev, handle, size, dir);
+	return handle;
+}
+EXPORT_SYMBOL(dma_map_page);
-- 
GitLab


From 24f1ce803c55f645429e6a7dd94763fbace84b0a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Thu, 16 Apr 2009 04:47:32 +0000
Subject: [PATCH 0648/1421] powerpc: Fix crash on CPU hotplug

early_init_mmu_secondary() is called at CPU hotplug time, so it
must be marked as __cpuinit, not __init.

Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit").

Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/hash_utils_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index db556d25c3a..1ade7eb6ae0 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -753,7 +753,7 @@ void __init early_init_mmu(void)
 }
 
 #ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
 {
 	/* Initialize hash table for that CPU */
 	if (!firmware_has_feature(FW_FEATURE_LPAR))
-- 
GitLab


From 59e4c3a2fe9cb1681bb2cff508ff79466f7585ba Mon Sep 17 00:00:00 2001
From: Andreas Schwab <schwab@linux-m68k.org>
Date: Thu, 16 Apr 2009 06:22:01 +0000
Subject: [PATCH 0649/1421] powerpc/32: Don't clobber personality flags on exec

Now that ppc32 implements address randomization it also wants to inherit
personality flags like ADDR_NO_RANDOMIZE across exec, for things like
`setarch ppc -R' to work.  But the ppc32 version of SET_PERSONALITY
forcefully sets PER_LINUX, clearing all personality flags.  So be
careful about preserving the flags.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/elf.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 1a856b15226..087c22f1d36 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -258,7 +258,8 @@ do {								\
 # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
 		(exec_stk != EXSTACK_DISABLE_X) : 0)
 #else 
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+  set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;
-- 
GitLab


From 0d3b2ab6be1500041e11059bee97e83da9da28cc Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Thu, 16 Apr 2009 09:05:38 +0000
Subject: [PATCH 0650/1421] powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning

Fix build warnings like these when CONFIG_PS3_FLASH=n:

  arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/ps3/os-area.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 86e392b1b04..cf1cd0f8c18 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -578,7 +578,7 @@ static void os_area_db_init(struct os_area_db *db)
  *
  */
 
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
 {
 	int result;
 	int file;
-- 
GitLab


From fec629b827335154366ecd8b38f007d649338fb3 Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Thu, 16 Apr 2009 09:05:40 +0000
Subject: [PATCH 0651/1421] maintainers: Fix PS3 patterns

Correct the MAINTAINERS file patterns for PS3.  Removes some PS3
patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and
adds missing PS3 sound and RTC driver patterns.

CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 MAINTAINERS | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0cb20d82169..e133ba4de41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1280,12 +1280,9 @@ L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
-F:	arch/powerpc/include/asm/lv1call.h
-F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
-F:	arch/powerpc/platforms/ps3/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 P:	David Vrabel
@@ -4441,7 +4438,9 @@ F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/platforms/ps3/
 F:	drivers/*/ps3*
 F:	drivers/ps3/
+F:	drivers/rtc/rtc-ps3.c
 F:	drivers/usb/host/*ps3.c
+F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 P:	Jim Paris
-- 
GitLab


From bcd71fe6b1a8694747b0b451c9ec22d813ad7e27 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Fri, 17 Apr 2009 00:15:13 +0000
Subject: [PATCH 0652/1421] powerpc: Make macintosh/mediabay driver depend on
 CONFIG_BLOCK

Fixes this build error:

In file included from drivers/macintosh/mediabay.c:21:
include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 173cf55c64d..3d906833948 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -123,7 +123,7 @@ config PMAC_APM_EMU
 
 config PMAC_MEDIABAY
 	bool "Support PowerBook hotswap media bay"
-	depends on PPC_PMAC && PPC32
+	depends on PPC_PMAC && PPC32 && BLOCK
 	help
 	  This option adds support for older PowerBook's hotswap media bay
 	  that can contains batteries, floppy drives, or IDE devices. PCI
-- 
GitLab


From 2d6b3de2374dd8c9f5ab23d57c7bbcda08553356 Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Fri, 17 Apr 2009 06:36:37 +0000
Subject: [PATCH 0653/1421] powerpc/pasemi: Fix build error on UP
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the pasemi setup.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: subrata@linux.vnet.ibm.com
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pasemi/setup.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index c64fb5bfb37..153051eb6d9 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -44,10 +44,6 @@
 
 #include "pasemi.h"
 
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
 /* SDC reset register, must be pre-mapped at reset time */
 static void __iomem *reset_reg;
 
-- 
GitLab


From 6329db8bd60fbc0832f30c350b0181b8d865573e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 21 Apr 2009 09:04:37 +0000
Subject: [PATCH 0654/1421] powerpc: Fix modular build of ide-pmac when
 mediabay is built in
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Now that the powermac IDE host driver can be modular, we need to
export check_media_bay_by_base() and media_bay_set_ide_infos()
from drivers/macintosh/mediabay.c for it.

This fixes the following build error:

> CC [M]  drivers/ide/pmac.o
> drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’:
> drivers/ide/pmac.c:955: error: implicit declaration of function
> ‘check_media_bay_by_base’
> drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’:
> drivers/ide/pmac.c:1090: error: implicit declaration of function
> ‘media_bay_set_ide_infos’
> make[2]: *** [drivers/ide/pmac.o] Error 1
> make[1]: *** [drivers/ide] Error 2
> make: *** [drivers] Error 2

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/macintosh/mediabay.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index d7e46d345d9..cf02188a90a 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -447,6 +447,7 @@ int check_media_bay_by_base(unsigned long base, int what)
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
 
 int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
 			    int irq, ide_hwif_t *hwif)
@@ -486,6 +487,7 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
 
 static void media_bay_step(int i)
-- 
GitLab


From 23c560a99d78bddf5c251bfa97bce19e4da4b3f3 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 15 Apr 2009 22:10:23 +0900
Subject: [PATCH 0655/1421] scatterlist: make sure sg_miter_next() doesn't
 return 0 sized mappings

Impact: fix not-so-critical but annoying bug

sg_miter_next() returns 0 sized mapping if there is an zero sized sg
entry in the list or at the end of each iteration.  As the users
always check the ->length field, this bug shouldn't be critical other
than causing unnecessary iteration.

Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 lib/scatterlist.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index b7b449dafbe..a295e404e90 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -347,9 +347,12 @@ bool sg_miter_next(struct sg_mapping_iter *miter)
 	sg_miter_stop(miter);
 
 	/* get to the next sg if necessary.  __offset is adjusted by stop */
-	if (miter->__offset == miter->__sg->length && --miter->__nents) {
-		miter->__sg = sg_next(miter->__sg);
-		miter->__offset = 0;
+	while (miter->__offset == miter->__sg->length) {
+		if (--miter->__nents) {
+			miter->__sg = sg_next(miter->__sg);
+			miter->__offset = 0;
+		} else
+			return false;
 	}
 
 	/* map the next page */
-- 
GitLab


From 25636e282fe95508cae96bb27f86407aef935817 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 15 Apr 2009 22:10:24 +0900
Subject: [PATCH 0656/1421] block: fix SG_IO vector request data length
 handling

Impact: fix SG_IO behavior such that it matches the documentation

SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins.  However, the current implementation returns -EINVAL
for such cases.  Trim iovc if it's longer than ->dxfer_len.

This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it.  sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/scsi_ioctl.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 84b7f8709f4..82a0ca2f672 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -290,6 +290,7 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
 
 	if (hdr->iovec_count) {
 		const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
+		size_t iov_data_len;
 		struct sg_iovec *iov;
 
 		iov = kmalloc(size, GFP_KERNEL);
@@ -304,8 +305,18 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
 			goto out;
 		}
 
+		/* SG_IO howto says that the shorter of the two wins */
+		iov_data_len = iov_length((struct iovec *)iov,
+					  hdr->iovec_count);
+		if (hdr->dxfer_len < iov_data_len) {
+			hdr->iovec_count = iov_shorten((struct iovec *)iov,
+						       hdr->iovec_count,
+						       hdr->dxfer_len);
+			iov_data_len = hdr->dxfer_len;
+		}
+
 		ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
-					  hdr->dxfer_len, GFP_KERNEL);
+					  iov_data_len, GFP_KERNEL);
 		kfree(iov);
 	} else if (hdr->dxfer_len)
 		ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
-- 
GitLab


From cd0aca2d550f238d80ba58e7dcade4ea3d0a3aa7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 15 Apr 2009 22:10:25 +0900
Subject: [PATCH 0657/1421] block: fix queue bounce limit setting

Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily

All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that.  However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.

As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer.  Fix it.  While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-settings.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index 69c42adde52..57af728d94b 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -156,26 +156,28 @@ EXPORT_SYMBOL(blk_queue_make_request);
 
 /**
  * blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q:  the request queue for the device
- * @dma_addr:   bus address limit
+ * @q: the request queue for the device
+ * @dma_mask: the maximum address the device can handle
  *
  * Description:
  *    Different hardware can have different requirements as to what pages
  *    it can do I/O directly to. A low level driver can call
  *    blk_queue_bounce_limit to have lower memory pages allocated as bounce
- *    buffers for doing I/O to pages residing above @dma_addr.
+ *    buffers for doing I/O to pages residing above @dma_mask.
  **/
-void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
+void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
 {
-	unsigned long b_pfn = dma_addr >> PAGE_SHIFT;
+	unsigned long b_pfn = dma_mask >> PAGE_SHIFT;
 	int dma = 0;
 
 	q->bounce_gfp = GFP_NOIO;
 #if BITS_PER_LONG == 64
-	/* Assume anything <= 4GB can be handled by IOMMU.
-	   Actually some IOMMUs can handle everything, but I don't
-	   know of a way to test this here. */
-	if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+	/*
+	 * Assume anything <= 4GB can be handled by IOMMU.  Actually
+	 * some IOMMUs can handle everything, but I don't know of a
+	 * way to test this here.
+	 */
+	if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
 		dma = 1;
 	q->bounce_pfn = max_low_pfn;
 #else
-- 
GitLab


From 451a9ebf653d28337ba53ed5b4b70b0b9543cca1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 15 Apr 2009 19:50:51 +0200
Subject: [PATCH 0658/1421] bio: fix bio_kmalloc()

Impact: fix bio_kmalloc() and its destruction path

bio_kmalloc() was broken in two ways.

* bvec_alloc_bs() first allocates bvec using kmalloc() and then
  ignores it and allocates again like non-kmalloc bvecs.

* bio_kmalloc_destructor() didn't check for and free bio integrity
  data.

This patch fixes the above problems.  kmalloc patch is separated out
from bio_alloc_bioset() and allocates the requested number of bvecs as
inline bvecs.

* bio_alloc_bioset() no longer takes NULL @bs.  None other than
  bio_kmalloc() used it and outside users can't know how it was
  allocated anyway.

* Define and use BIO_POOL_NONE so that pool index check in
  bvec_free_bs() triggers if inline or kmalloc allocated bvec gets
  there.

* Relocate destructors on top of each allocation function so that how
  they're used is more clear.

Jens Axboe suggested allocating bvecs inline.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/bio.c            | 118 ++++++++++++++++++++------------------------
 include/linux/bio.h |   1 +
 2 files changed, 55 insertions(+), 64 deletions(-)

diff --git a/fs/bio.c b/fs/bio.c
index cd42bb882f3..d35588fd6d5 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -174,14 +174,6 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx,
 {
 	struct bio_vec *bvl;
 
-	/*
-	 * If 'bs' is given, lookup the pool and do the mempool alloc.
-	 * If not, this is a bio_kmalloc() allocation and just do a
-	 * kzalloc() for the exact number of vecs right away.
-	 */
-	if (!bs)
-		bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask);
-
 	/*
 	 * see comment near bvec_array define!
 	 */
@@ -260,21 +252,6 @@ void bio_free(struct bio *bio, struct bio_set *bs)
 	mempool_free(p, bs->bio_pool);
 }
 
-/*
- * default destructor for a bio allocated with bio_alloc_bioset()
- */
-static void bio_fs_destructor(struct bio *bio)
-{
-	bio_free(bio, fs_bio_set);
-}
-
-static void bio_kmalloc_destructor(struct bio *bio)
-{
-	if (bio_has_allocated_vec(bio))
-		kfree(bio->bi_io_vec);
-	kfree(bio);
-}
-
 void bio_init(struct bio *bio)
 {
 	memset(bio, 0, sizeof(*bio));
@@ -301,21 +278,15 @@ void bio_init(struct bio *bio)
  **/
 struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 {
+	unsigned long idx = BIO_POOL_NONE;
 	struct bio_vec *bvl = NULL;
-	struct bio *bio = NULL;
-	unsigned long idx = 0;
-	void *p = NULL;
-
-	if (bs) {
-		p = mempool_alloc(bs->bio_pool, gfp_mask);
-		if (!p)
-			goto err;
-		bio = p + bs->front_pad;
-	} else {
-		bio = kmalloc(sizeof(*bio), gfp_mask);
-		if (!bio)
-			goto err;
-	}
+	struct bio *bio;
+	void *p;
+
+	p = mempool_alloc(bs->bio_pool, gfp_mask);
+	if (unlikely(!p))
+		return NULL;
+	bio = p + bs->front_pad;
 
 	bio_init(bio);
 
@@ -332,22 +303,50 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 
 		nr_iovecs = bvec_nr_vecs(idx);
 	}
+out_set:
 	bio->bi_flags |= idx << BIO_POOL_OFFSET;
 	bio->bi_max_vecs = nr_iovecs;
-out_set:
 	bio->bi_io_vec = bvl;
-
 	return bio;
 
 err_free:
-	if (bs)
-		mempool_free(p, bs->bio_pool);
-	else
-		kfree(bio);
-err:
+	mempool_free(p, bs->bio_pool);
 	return NULL;
 }
 
+static void bio_fs_destructor(struct bio *bio)
+{
+	bio_free(bio, fs_bio_set);
+}
+
+/**
+ *	bio_alloc - allocate a new bio, memory pool backed
+ *	@gfp_mask: allocation mask to use
+ *	@nr_iovecs: number of iovecs
+ *
+ *	Allocate a new bio with @nr_iovecs bvecs.  If @gfp_mask
+ *	contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ *
+ *	RETURNS:
+ *	Pointer to new bio on success, NULL on failure.
+ */
+struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
+{
+	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
+
+	if (bio)
+		bio->bi_destructor = bio_fs_destructor;
+
+	return bio;
+}
+
+static void bio_kmalloc_destructor(struct bio *bio)
+{
+	if (bio_integrity(bio))
+		bio_integrity_free(bio);
+	kfree(bio);
+}
+
 /**
  * bio_alloc - allocate a bio for I/O
  * @gfp_mask:   the GFP_ mask given to the slab allocator
@@ -366,29 +365,20 @@ err:
  *   do so can cause livelocks under memory pressure.
  *
  **/
-struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
-{
-	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
-
-	if (bio)
-		bio->bi_destructor = bio_fs_destructor;
-
-	return bio;
-}
-
-/*
- * Like bio_alloc(), but doesn't use a mempool backing. This means that
- * it CAN fail, but while bio_alloc() can only be used for allocations
- * that have a short (finite) life span, bio_kmalloc() should be used
- * for more permanent bio allocations (like allocating some bio's for
- * initalization or setup purposes).
- */
 struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
 {
-	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL);
+	struct bio *bio;
 
-	if (bio)
-		bio->bi_destructor = bio_kmalloc_destructor;
+	bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
+		      gfp_mask);
+	if (unlikely(!bio))
+		return NULL;
+
+	bio_init(bio);
+	bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET;
+	bio->bi_max_vecs = nr_iovecs;
+	bio->bi_io_vec = bio->bi_inline_vecs;
+	bio->bi_destructor = bio_kmalloc_destructor;
 
 	return bio;
 }
diff --git a/include/linux/bio.h b/include/linux/bio.h
index b89cf2d8289..7b214fd672a 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -132,6 +132,7 @@ struct bio {
  * top 4 bits of bio flags indicate the pool this bio came from
  */
 #define BIO_POOL_BITS		(4)
+#define BIO_POOL_NONE		((1UL << BIO_POOL_BITS) - 1)
 #define BIO_POOL_OFFSET		(BITS_PER_LONG - BIO_POOL_BITS)
 #define BIO_POOL_MASK		(1UL << BIO_POOL_OFFSET)
 #define BIO_POOL_IDX(bio)	((bio)->bi_flags >> BIO_POOL_OFFSET)	
-- 
GitLab


From a9e9dc24bbc3e084450a22cf4fb82f5f5d4cbeea Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 15 Apr 2009 22:10:27 +0900
Subject: [PATCH 0659/1421] bio: use bio_kmalloc() in copy/map functions

Impact: remove possible deadlock condition

There is no reason to use mempool backed allocation for map functions.
Also, because kern mapping is used inside LLDs (e.g. for EH), using
mempool backed allocation can lead to deadlock under extreme
conditions (mempool already consumed by the time a request reached EH
and requests are blocked on EH).

Switch copy/map functions to bio_kmalloc().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/bio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/bio.c b/fs/bio.c
index d35588fd6d5..7bbc98f0eda 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -822,7 +822,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
 		return ERR_PTR(-ENOMEM);
 
 	ret = -ENOMEM;
-	bio = bio_alloc(gfp_mask, nr_pages);
+	bio = bio_kmalloc(gfp_mask, nr_pages);
 	if (!bio)
 		goto out_bmd;
 
@@ -946,7 +946,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 	if (!nr_pages)
 		return ERR_PTR(-EINVAL);
 
-	bio = bio_alloc(gfp_mask, nr_pages);
+	bio = bio_kmalloc(gfp_mask, nr_pages);
 	if (!bio)
 		return ERR_PTR(-ENOMEM);
 
@@ -1130,7 +1130,7 @@ static struct bio *__bio_map_kern(struct request_queue *q, void *data,
 	int offset, i;
 	struct bio *bio;
 
-	bio = bio_alloc(gfp_mask, nr_pages);
+	bio = bio_kmalloc(gfp_mask, nr_pages);
 	if (!bio)
 		return ERR_PTR(-ENOMEM);
 
-- 
GitLab


From 71982a409f12c50d011325a4471aa20666bb908d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 17 Apr 2009 08:34:48 +0200
Subject: [PATCH 0660/1421] block: include empty disks in /proc/diskstats

/proc/diskstats used to show stats for all disks whether they're
zero-sized or not and their non-zero partitions.  Commit
074a7aca7afa6f230104e8e65eba3420263714a5 accidentally changed the
behavior such that it doesn't print out zero sized disks.  This patch
implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and
uses it in diskstats_show() such that empty part0 is shown in
/proc/diskstats.

Reported and bisectd by Dianel Collins.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Collins <solemnwarning@solemnwarning.no-ip.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/genhd.c         | 12 ++++++++----
 include/linux/genhd.h |  1 +
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index a9ec910974c..1a4916e0173 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -98,7 +98,7 @@ void disk_part_iter_init(struct disk_part_iter *piter, struct gendisk *disk,
 
 	if (flags & DISK_PITER_REVERSE)
 		piter->idx = ptbl->len - 1;
-	else if (flags & DISK_PITER_INCL_PART0)
+	else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0))
 		piter->idx = 0;
 	else
 		piter->idx = 1;
@@ -134,7 +134,8 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter)
 	/* determine iteration parameters */
 	if (piter->flags & DISK_PITER_REVERSE) {
 		inc = -1;
-		if (piter->flags & DISK_PITER_INCL_PART0)
+		if (piter->flags & (DISK_PITER_INCL_PART0 |
+				    DISK_PITER_INCL_EMPTY_PART0))
 			end = -1;
 		else
 			end = 0;
@@ -150,7 +151,10 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter)
 		part = rcu_dereference(ptbl->part[piter->idx]);
 		if (!part)
 			continue;
-		if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects)
+		if (!part->nr_sects &&
+		    !(piter->flags & DISK_PITER_INCL_EMPTY) &&
+		    !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 &&
+		      piter->idx == 0))
 			continue;
 
 		get_device(part_to_dev(part));
@@ -1011,7 +1015,7 @@ static int diskstats_show(struct seq_file *seqf, void *v)
 				"\n\n");
 	*/
  
-	disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0);
+	disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0);
 	while ((hd = disk_part_iter_next(&piter))) {
 		cpu = part_stat_lock();
 		part_round_stats(cpu, hd);
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 634c53028fb..a1a28caed23 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -214,6 +214,7 @@ static inline void disk_put_part(struct hd_struct *part)
 #define DISK_PITER_REVERSE	(1 << 0) /* iterate in the reverse direction */
 #define DISK_PITER_INCL_EMPTY	(1 << 1) /* include 0-sized parts */
 #define DISK_PITER_INCL_PART0	(1 << 2) /* include partition 0 */
+#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
 
 struct disk_part_iter {
 	struct gendisk		*disk;
-- 
GitLab


From b759113499d6c7cb75fab04f56772579308bc0f8 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Fri, 17 Apr 2009 08:36:50 +0200
Subject: [PATCH 0661/1421] block: make blk_abort_queue() ignore non-request
 based devices

There's nothing to do for those devices, since the timeout handling is
based on requests.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-timeout.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index bbbdc4b8ccf..8f570c4c80e 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -211,6 +211,12 @@ void blk_abort_queue(struct request_queue *q)
 	struct request *rq, *tmp;
 	LIST_HEAD(list);
 
+	/*
+	 * Not a request based block device, nothing to abort
+	 */
+	if (!q->request_fn)
+		return;
+
 	spin_lock_irqsave(q->queue_lock, flags);
 
 	elv_abort_queue(q);
-- 
GitLab


From 4d00aa47e2337dcfe2d8a7215dbde3765b507167 Mon Sep 17 00:00:00 2001
From: Jeff Moyer <jmoyer@redhat.com>
Date: Tue, 21 Apr 2009 07:25:04 +0200
Subject: [PATCH 0662/1421] cfq-iosched: make seek_mean converge more quickly

Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 0d3b70de3d8..0eb4aff9df6 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1908,7 +1908,9 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic,
 	sector_t sdist;
 	u64 total;
 
-	if (cic->last_request_pos < rq->sector)
+	if (!cic->last_request_pos)
+		sdist = 0;
+	else if (cic->last_request_pos < rq->sector)
 		sdist = rq->sector - cic->last_request_pos;
 	else
 		sdist = cic->last_request_pos - rq->sector;
-- 
GitLab


From 04dc6e71a28d4815bf9431efcafc107bb0ad2792 Mon Sep 17 00:00:00 2001
From: Jeff Moyer <jmoyer@redhat.com>
Date: Tue, 21 Apr 2009 07:31:56 +0200
Subject: [PATCH 0663/1421] cfq-iosched: use the default seek distance when
 there aren't enough seek samples

If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 0eb4aff9df6..7e13f04b5ed 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -947,14 +947,18 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd,
 		return cfqd->last_position - rq->sector;
 }
 
+#define CIC_SEEK_THR	8 * 1024
+#define CIC_SEEKY(cic)	((cic)->seek_mean > CIC_SEEK_THR)
+
 static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
 {
 	struct cfq_io_context *cic = cfqd->active_cic;
+	sector_t sdist = cic->seek_mean;
 
 	if (!sample_valid(cic->seek_samples))
-		return 0;
+		sdist = CIC_SEEK_THR;
 
-	return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
+	return cfq_dist_from_last(cfqd, rq) <= sdist;
 }
 
 static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
@@ -1039,9 +1043,6 @@ static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
 	return cfqq;
 }
 
-
-#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
-
 static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 {
 	struct cfq_queue *cfqq = cfqd->active_queue;
-- 
GitLab


From c5505081cd734a409eb11e1f844b6bf5427a7925 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 22 Apr 2009 17:10:46 +1000
Subject: [PATCH 0664/1421] m68knommu: update the defconfig for the ColdFire
 5208evb board

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5208evb_defconfig | 163 ++++++++++++----------
 1 file changed, 93 insertions(+), 70 deletions(-)

diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
index 6fae33a05e2..854a4f333b2 100644
--- a/arch/m68knommu/configs/m5208evb_defconfig
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,53 +34,55 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,7 +96,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -145,44 +148,39 @@ CONFIG_RAM16BIT=y
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -223,6 +221,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -232,7 +231,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -243,14 +244,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -289,10 +284,8 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI is not set
 # CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -303,10 +296,6 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -315,7 +304,6 @@ CONFIG_MTD_RAM=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -336,6 +324,11 @@ CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -351,6 +344,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -364,7 +358,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -374,10 +368,15 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
@@ -389,8 +388,10 @@ CONFIG_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -415,7 +416,7 @@ CONFIG_FEC=y
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -428,7 +429,6 @@ CONFIG_FEC=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=115200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -447,19 +447,23 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -470,11 +474,12 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_DAB=y
 
 #
 # Graphics support
@@ -488,10 +493,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -499,7 +500,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -507,11 +511,13 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -519,6 +525,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -540,10 +551,7 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -553,13 +561,20 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -581,10 +596,14 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 CONFIG_FULLDEBUG=y
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -592,19 +611,23 @@ CONFIG_FULLDEBUG=y
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From f170ea24c218905f78791b15a6dcb3c99b730a60 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 22 Apr 2009 17:26:49 +1000
Subject: [PATCH 0665/1421] m68knommu: add a defconfig for the ColdFire M5272C3
 board

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5272c3_defconfig | 645 +++++++++++++++++++++++
 1 file changed, 645 insertions(+)
 create mode 100644 arch/m68knommu/configs/m5272c3_defconfig

diff --git a/arch/m68knommu/configs/m5272c3_defconfig b/arch/m68knommu/configs/m5272c3_defconfig
new file mode 100644
index 00000000000..f37852a3421
--- /dev/null
+++ b/arch/m68knommu/configs/m5272c3_defconfig
@@ -0,0 +1,645 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:17:30 2009
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_NO_IOPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+CONFIG_M5272=y
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+# CONFIG_UC5272 is not set
+CONFIG_M5272C3=y
+# CONFIG_COBRA5272 is not set
+# CONFIG_CANCam is not set
+# CONFIG_SCALES is not set
+# CONFIG_NETtel is not set
+# CONFIG_CPU16B is not set
+# CONFIG_MOD5272 is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From ae6e84596e7b321d9a08e81679c6a3f799634636 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Thu, 12 Mar 2009 00:19:46 -0500
Subject: [PATCH 0666/1421] eCryptfs: Copy lower inode attrs before dentry
 instantiation

Copies the lower inode attributes to the upper inode before passing the
upper inode to d_instantiate().  This is important for
security_d_instantiate().

The problem was discovered by a user seeing SELinux denials like so:

type=AVC msg=audit(1236812817.898:47): avc:  denied  { 0x100000 } for
pid=3584 comm="httpd" name="testdir" dev=ecryptfs ino=943872
scontext=root:system_r:httpd_t:s0
tcontext=root:object_r:httpd_sys_content_t:s0 tclass=file

Notice target class is file while testdir is really a directory,
confusing the permission translation (0x100000) due to the wrong i_mode.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index aed56c25539..7638b0a02c8 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -190,14 +190,14 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry,
 		init_special_inode(inode, lower_inode->i_mode,
 				   lower_inode->i_rdev);
 	dentry->d_op = &ecryptfs_dops;
-	if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
-		d_add(dentry, inode);
-	else
-		d_instantiate(dentry, inode);
 	fsstack_copy_attr_all(inode, lower_inode, NULL);
 	/* This size will be overwritten for real files w/ headers and
 	 * other metadata */
 	fsstack_copy_inode_size(inode, lower_inode);
+	if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
+		d_add(dentry, inode);
+	else
+		d_instantiate(dentry, inode);
 out:
 	return rc;
 }
-- 
GitLab


From 57ea34d19963781d05eb12f9b31bd4f70d61ec16 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Sun, 15 Mar 2009 14:17:01 -0500
Subject: [PATCH 0667/1421] eCryptfs: NULL pointer dereference in
 ecryptfs_send_miscdev()

If data is NULL, msg_ctx->msg is set to NULL and then dereferenced
afterwards.  ecryptfs_send_raw_message() is the only place that
ecryptfs_send_miscdev() is called with data being NULL, but the only
caller of that function (ecryptfs_process_helo()) is never called.  In
short, there is currently no way to trigger the NULL pointer
dereference.

This patch removes the two unused functions and modifies
ecryptfs_send_miscdev() to remove the NULL dereferences.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/messaging.c | 82 -----------------------------------------
 fs/ecryptfs/miscdev.c   | 28 ++++++--------
 2 files changed, 11 insertions(+), 99 deletions(-)

diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index 295e7fa5675..f1c17e87c5f 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -133,45 +133,6 @@ out:
 	return rc;
 }
 
-static int
-ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type,
-			     struct ecryptfs_msg_ctx **msg_ctx);
-
-/**
- * ecryptfs_send_raw_message
- * @msg_type: Message type
- * @daemon: Daemon struct for recipient of message
- *
- * A raw message is one that does not include an ecryptfs_message
- * struct. It simply has a type.
- *
- * Must be called with ecryptfs_daemon_hash_mux held.
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_send_raw_message(u8 msg_type,
-				     struct ecryptfs_daemon *daemon)
-{
-	struct ecryptfs_msg_ctx *msg_ctx;
-	int rc;
-
-	rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx);
-	if (rc) {
-		printk(KERN_ERR "%s: Error whilst attempting to send "
-		       "message to ecryptfsd; rc = [%d]\n", __func__, rc);
-		goto out;
-	}
-	/* Raw messages are logically context-free (e.g., no
-	 * reply is expected), so we set the state of the
-	 * ecryptfs_msg_ctx object to indicate that it should
-	 * be freed as soon as the message is sent. */
-	mutex_lock(&msg_ctx->mux);
-	msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY;
-	mutex_unlock(&msg_ctx->mux);
-out:
-	return rc;
-}
-
 /**
  * ecryptfs_spawn_daemon - Create and initialize a new daemon struct
  * @daemon: Pointer to set to newly allocated daemon struct
@@ -211,49 +172,6 @@ out:
 	return rc;
 }
 
-/**
- * ecryptfs_process_helo
- * @euid: The user ID owner of the message
- * @user_ns: The namespace in which @euid applies
- * @pid: The process ID for the userspace program that sent the
- *       message
- *
- * Adds the euid and pid values to the daemon euid hash.  If an euid
- * already has a daemon pid registered, the daemon will be
- * unregistered before the new daemon is put into the hash list.
- * Returns zero after adding a new daemon to the hash list;
- * non-zero otherwise.
- */
-int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns,
-			  struct pid *pid)
-{
-	struct ecryptfs_daemon *new_daemon;
-	struct ecryptfs_daemon *old_daemon;
-	int rc;
-
-	mutex_lock(&ecryptfs_daemon_hash_mux);
-	rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns);
-	if (rc != 0) {
-		printk(KERN_WARNING "Received request from user [%d] "
-		       "to register daemon [0x%p]; unregistering daemon "
-		       "[0x%p]\n", euid, pid, old_daemon->pid);
-		rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon);
-		if (rc)
-			printk(KERN_WARNING "Failed to send QUIT "
-			       "message to daemon [0x%p]; rc = [%d]\n",
-			       old_daemon->pid, rc);
-		hlist_del(&old_daemon->euid_chain);
-		kfree(old_daemon);
-	}
-	rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid);
-	if (rc)
-		printk(KERN_ERR "%s: The gods are displeased with this attempt "
-		       "to create a new daemon object for euid [%d]; pid "
-		       "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc);
-	mutex_unlock(&ecryptfs_daemon_hash_mux);
-	return rc;
-}
-
 /**
  * ecryptfs_exorcise_daemon - Destroy the daemon struct
  *
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index dda3c58eefc..4ec8f61ccf5 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -193,26 +193,20 @@ int ecryptfs_send_miscdev(char *data, size_t data_size,
 	int rc = 0;
 
 	mutex_lock(&msg_ctx->mux);
-	if (data) {
-		msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
-				       GFP_KERNEL);
-		if (!msg_ctx->msg) {
-			rc = -ENOMEM;
-			printk(KERN_ERR "%s: Out of memory whilst attempting "
-			       "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
-			       (sizeof(*msg_ctx->msg) + data_size));
-			goto out_unlock;
-		}
-	} else
-		msg_ctx->msg = NULL;
+	msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
+			       GFP_KERNEL);
+	if (!msg_ctx->msg) {
+		rc = -ENOMEM;
+		printk(KERN_ERR "%s: Out of memory whilst attempting "
+		       "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
+		       (sizeof(*msg_ctx->msg) + data_size));
+		goto out_unlock;
+	}
 	msg_ctx->msg->index = msg_ctx->index;
 	msg_ctx->msg->data_len = data_size;
 	msg_ctx->type = msg_type;
-	if (data) {
-		memcpy(msg_ctx->msg->data, data, data_size);
-		msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
-	} else
-		msg_ctx->msg_size = 0;
+	memcpy(msg_ctx->msg->data, data, data_size);
+	msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
 	mutex_lock(&daemon->mux);
 	list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
 	daemon->num_queued_msg_ctx++;
-- 
GitLab


From 3a5203ab3c0c31e0f1434c69e893bfb85c6e6657 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Mon, 16 Mar 2009 12:35:12 -0500
Subject: [PATCH 0668/1421] eCryptfs: Print FNEK sig properly in /proc/mounts

The filename encryption key signature is not properly displayed in
/proc/mounts.  The "ecryptfs_sig=" mount option name is displayed for
all global authentication tokens, included those for filename keys.

This patch checks the global authentication token flags to determine if
the key is a FEKEK or FNEK and prints the appropriate mount option name
before the signature.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/super.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index c27ac2b358a..b5003023f10 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -170,7 +170,10 @@ static int ecryptfs_show_options(struct seq_file *m, struct vfsmount *mnt)
 	list_for_each_entry(walker,
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
-		seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
+		if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK)
+			seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig);
+		else
+			seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
 	}
 	mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
 
-- 
GitLab


From 13a791b4e63eb0537a7f804a340d6527485983b4 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Mon, 13 Apr 2009 15:29:27 -0500
Subject: [PATCH 0669/1421] eCryptfs: Fix data corruption when using
 ecryptfs_passthrough

ecryptfs_passthrough is a mount option that allows eCryptfs to allow
data to be written to non-eCryptfs files in the lower filesystem.  The
passthrough option was causing data corruption due to it not always
being treated as a non-eCryptfs file.

The first 8 bytes of an eCryptfs file contains the decrypted file size.
This value was being written to the non-eCryptfs files, too.  Also,
extra 0x00 characters were being written to make the file size a
multiple of PAGE_CACHE_SIZE.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/crypto.c     | 21 ++-------------------
 fs/ecryptfs/inode.c      |  9 +++++++--
 fs/ecryptfs/mmap.c       | 11 +++++++++++
 fs/ecryptfs/read_write.c | 32 +++++++++++++++++++++-----------
 4 files changed, 41 insertions(+), 32 deletions(-)

diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 8b65f289ee0..b91851f1cda 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -483,15 +483,7 @@ int ecryptfs_encrypt_page(struct page *page)
 	ecryptfs_inode = page->mapping->host;
 	crypt_stat =
 		&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
-	if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
-		rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page,
-						       0, PAGE_CACHE_SIZE);
-		if (rc)
-			printk(KERN_ERR "%s: Error attempting to copy "
-			       "page at index [%ld]\n", __func__,
-			       page->index);
-		goto out;
-	}
+	BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
 	enc_extent_page = alloc_page(GFP_USER);
 	if (!enc_extent_page) {
 		rc = -ENOMEM;
@@ -620,16 +612,7 @@ int ecryptfs_decrypt_page(struct page *page)
 	ecryptfs_inode = page->mapping->host;
 	crypt_stat =
 		&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
-	if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
-		rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
-						      PAGE_CACHE_SIZE,
-						      ecryptfs_inode);
-		if (rc)
-			printk(KERN_ERR "%s: Error attempting to copy "
-			       "page at index [%ld]\n", __func__,
-			       page->index);
-		goto out;
-	}
+	BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
 	enc_extent_page = alloc_page(GFP_USER);
 	if (!enc_extent_page) {
 		rc = -ENOMEM;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 55b3145b807..5ed86e25b8a 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -814,6 +814,13 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
 		size_t num_zeros = (PAGE_CACHE_SIZE
 				    - (new_length & ~PAGE_CACHE_MASK));
 
+		if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+			rc = vmtruncate(inode, new_length);
+			if (rc)
+				goto out_free;
+			rc = vmtruncate(lower_dentry->d_inode, new_length);
+			goto out_free;
+		}
 		if (num_zeros) {
 			char *zeros_virt;
 
@@ -915,8 +922,6 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 			}
 			rc = 0;
 			crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
-			mutex_unlock(&crypt_stat->cs_mutex);
-			goto out;
 		}
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 46cec2b6979..5c6bab9786e 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -449,6 +449,7 @@ int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode)
 	struct ecryptfs_crypt_stat *crypt_stat;
 
 	crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
+	BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
 	if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
 		return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode);
 	else
@@ -490,6 +491,16 @@ static int ecryptfs_write_end(struct file *file,
 		ecryptfs_printk(KERN_DEBUG, "Not a new file\n");
 	ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page"
 			"(page w/ index = [0x%.16x], to = [%d])\n", index, to);
+	if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+		rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0,
+						       to);
+		if (!rc) {
+			rc = copied;
+			fsstack_copy_inode_size(ecryptfs_inode,
+				ecryptfs_inode_to_lower(ecryptfs_inode));
+		}
+		goto out;
+	}
 	/* Fills in zeros if 'to' goes beyond inode size */
 	rc = fill_zeros_to_end_of_page(page, to);
 	if (rc) {
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index 75c2ea9fee3..a137c6ea2fe 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -117,13 +117,15 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset,
 		   size_t size)
 {
 	struct page *ecryptfs_page;
+	struct ecryptfs_crypt_stat *crypt_stat;
+	struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode;
 	char *ecryptfs_page_virt;
-	loff_t ecryptfs_file_size =
-		i_size_read(ecryptfs_file->f_dentry->d_inode);
+	loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode);
 	loff_t data_offset = 0;
 	loff_t pos;
 	int rc = 0;
 
+	crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	/*
 	 * if we are writing beyond current size, then start pos
 	 * at the current size - we'll fill in zeros from there.
@@ -184,7 +186,13 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset,
 		flush_dcache_page(ecryptfs_page);
 		SetPageUptodate(ecryptfs_page);
 		unlock_page(ecryptfs_page);
-		rc = ecryptfs_encrypt_page(ecryptfs_page);
+		if (crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+			rc = ecryptfs_encrypt_page(ecryptfs_page);
+		else
+			rc = ecryptfs_write_lower_page_segment(ecryptfs_inode,
+						ecryptfs_page,
+						start_offset_in_page,
+						data_offset);
 		page_cache_release(ecryptfs_page);
 		if (rc) {
 			printk(KERN_ERR "%s: Error encrypting "
@@ -194,14 +202,16 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset,
 		pos += num_bytes;
 	}
 	if ((offset + size) > ecryptfs_file_size) {
-		i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size));
-		rc = ecryptfs_write_inode_size_to_metadata(
-			ecryptfs_file->f_dentry->d_inode);
-		if (rc) {
-			printk(KERN_ERR	"Problem with "
-			       "ecryptfs_write_inode_size_to_metadata; "
-			       "rc = [%d]\n", rc);
-			goto out;
+		i_size_write(ecryptfs_inode, (offset + size));
+		if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) {
+			rc = ecryptfs_write_inode_size_to_metadata(
+								ecryptfs_inode);
+			if (rc) {
+				printk(KERN_ERR	"Problem with "
+				       "ecryptfs_write_inode_size_to_metadata; "
+				       "rc = [%d]\n", rc);
+				goto out;
+			}
 		}
 	}
 out:
-- 
GitLab


From e77cc8d243f9f1e1d3f0799e23cc14e837ccc8c6 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Wed, 22 Apr 2009 04:08:46 -0500
Subject: [PATCH 0670/1421] eCryptfs: Remove ecryptfs_unlink_sigs warnings

A feature was added to the eCryptfs umount helper to automatically
unlink the keys used for an eCryptfs mount from the kernel keyring upon
umount.  This patch keeps the unrecognized mount option warnings for
ecryptfs_unlink_sigs out of the logs.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/ecryptfs_kernel.h | 1 +
 fs/ecryptfs/main.c            | 6 +++++-
 fs/ecryptfs/super.c           | 2 ++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 064c5820e4e..00b30a2d546 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -269,6 +269,7 @@ struct ecryptfs_crypt_stat {
 #define ECRYPTFS_ENCRYPT_FILENAMES    0x00000800
 #define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000
 #define ECRYPTFS_ENCFN_USE_FEK        0x00002000
+#define ECRYPTFS_UNLINK_SIGS	      0x00004000
 	u32 flags;
 	unsigned int file_version;
 	size_t iv_bytes;
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 7638b0a02c8..ccabd5faa04 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -208,7 +208,7 @@ enum { ecryptfs_opt_sig, ecryptfs_opt_ecryptfs_sig,
        ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata,
        ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig,
        ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes,
-       ecryptfs_opt_err };
+       ecryptfs_opt_unlink_sigs, ecryptfs_opt_err };
 
 static const match_table_t tokens = {
 	{ecryptfs_opt_sig, "sig=%s"},
@@ -222,6 +222,7 @@ static const match_table_t tokens = {
 	{ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"},
 	{ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"},
 	{ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"},
+	{ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"},
 	{ecryptfs_opt_err, NULL}
 };
 
@@ -402,6 +403,9 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options)
 				fn_cipher_key_bytes;
 			fn_cipher_key_bytes_set = 1;
 			break;
+		case ecryptfs_opt_unlink_sigs:
+			mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS;
+			break;
 		case ecryptfs_opt_err:
 		default:
 			printk(KERN_WARNING
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index b5003023f10..fa4c7e7d15d 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -189,6 +189,8 @@ static int ecryptfs_show_options(struct seq_file *m, struct vfsmount *mnt)
 		seq_printf(m, ",ecryptfs_xattr_metadata");
 	if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
 		seq_printf(m, ",ecryptfs_encrypted_view");
+	if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS)
+		seq_printf(m, ",ecryptfs_unlink_sigs");
 
 	return 0;
 }
-- 
GitLab


From ccb077fd466ec3f35662d6c66412b42b36e11bc3 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 21 Apr 2009 12:57:00 +0100
Subject: [PATCH 0671/1421] ASoC: Fix WM8580 volume update handling for large
 register changes

The driver is out of sync with the core functions it is using.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8580.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 41aab4a7a25..9f6be3d31ac 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -268,9 +268,11 @@ static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
 static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
 			 struct snd_ctl_elem_value *ucontrol)
 {
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	int reg = kcontrol->private_value & 0xff;
-	int reg2 = (kcontrol->private_value >> 24) & 0xff;
+	unsigned int reg = mc->reg;
+	unsigned int reg2 = mc->rreg;
 	int ret;
 	u16 val;
 
@@ -292,15 +294,17 @@ static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
+#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
+				    xinvert, tlv_array)			\
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
 		SNDRV_CTL_ELEM_ACCESS_READWRITE,  \
 	.tlv.p = (tlv_array), \
 	.info = snd_soc_info_volsw_2r, \
 	.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
-	.private_value = (reg_left) | ((shift) << 8)  |		\
-		((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+		.max = xmax, .invert = xinvert} }
 
 static const struct snd_kcontrol_new wm8580_snd_controls[] = {
 SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
-- 
GitLab


From 956d039a2537cf79ca608450d36cc70e0e515482 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 17 Apr 2009 04:14:15 -0700
Subject: [PATCH 0672/1421] sparc: Fix bus type probing for ESP and LE devices.

If there is a dummy "espdma" or "ledma" parent device above ESP scsi
or LE ethernet device nodes, we have to match the bus as SBUS.

Otherwise the address and size cell counts are wrong and we don't
calculate the final physical device resource values correctly at all.

Commit 5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling
of LANCE and ESP parent nodes in of_device.c") was meant to fix this
problem, but that only influences the inner loop of
build_device_resources().  We need this logic to also kick in at the
beginning of build_device_resources() as well, when we make the first
attempt to determine the device's immediate parent bus type for 'reg'
property element extraction.

Based almost entirely upon a patch by Friedrich Oslage.

Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/of_device_32.c | 21 +++++++++++++++++++--
 arch/sparc/kernel/of_device_64.c | 21 +++++++++++++++++++--
 2 files changed, 38 insertions(+), 4 deletions(-)

diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 0a83bd73765..c8f14c1dc52 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -246,8 +246,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 
 static int of_bus_sbus_match(struct device_node *np)
 {
-	return !strcmp(np->name, "sbus") ||
-		!strcmp(np->name, "sbi");
+	struct device_node *dp = np;
+
+	while (dp) {
+		if (!strcmp(dp->name, "sbus") ||
+		    !strcmp(dp->name, "sbi"))
+			return 1;
+
+		/* Have a look at use_1to1_mapping().  We're trying
+		 * to match SBUS if that's the top-level bus and we
+		 * don't have some intervening real bus that provides
+		 * ranges based translations.
+		 */
+		if (of_find_property(dp, "ranges", NULL) != NULL)
+			break;
+
+		dp = dp->parent;
+	}
+
+	return 0;
 }
 
 static void of_bus_sbus_count_cells(struct device_node *child,
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 27381f1baff..5ac287ac03d 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -300,8 +300,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 
 static int of_bus_sbus_match(struct device_node *np)
 {
-	return !strcmp(np->name, "sbus") ||
-		!strcmp(np->name, "sbi");
+	struct device_node *dp = np;
+
+	while (dp) {
+		if (!strcmp(dp->name, "sbus") ||
+		    !strcmp(dp->name, "sbi"))
+			return 1;
+
+		/* Have a look at use_1to1_mapping().  We're trying
+		 * to match SBUS if that's the top-level bus and we
+		 * don't have some intervening real bus that provides
+		 * ranges based translations.
+		 */
+		if (of_find_property(dp, "ranges", NULL) != NULL)
+			break;
+
+		dp = dp->parent;
+	}
+
+	return 0;
 }
 
 static void of_bus_sbus_count_cells(struct device_node *child,
-- 
GitLab


From 99894a799f09cf9e28296bb16e75bd5830fd2c4e Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 29 Mar 2009 16:31:25 +0300
Subject: [PATCH 0673/1421] KVM: MMU: Fix off-by-one calculating large page
 count

The large page initialization code concludes there are two large pages spanned
by a slot covering 1 (small) page starting at gfn 1.  This is incorrect, and
also results in incorrect write_count initialization in some cases (base = 1,
npages = 513 for example).

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 virt/kvm/kvm_main.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 605697e9c4d..28d693a1ee8 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -920,6 +920,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	int r;
 	gfn_t base_gfn;
 	unsigned long npages;
+	int largepages;
 	unsigned long i;
 	struct kvm_memory_slot *memslot;
 	struct kvm_memory_slot old, new;
@@ -995,11 +996,8 @@ int __kvm_set_memory_region(struct kvm *kvm,
 			new.userspace_addr = 0;
 	}
 	if (npages && !new.lpage_info) {
-		int largepages = npages / KVM_PAGES_PER_HPAGE;
-		if (npages % KVM_PAGES_PER_HPAGE)
-			largepages++;
-		if (base_gfn % KVM_PAGES_PER_HPAGE)
-			largepages++;
+		largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE;
+		largepages -= base_gfn / KVM_PAGES_PER_HPAGE;
 
 		new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info));
 
-- 
GitLab


From d24d2c1cc4156102f9df9cd0425d58cabf955519 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Thu, 9 Apr 2009 16:38:14 +0200
Subject: [PATCH 0674/1421] KVM: ia64: fix locking order entering guest

Reorder locking as down_read() may return with local interrupts enabled,
which means we could go into vti_vcpu_run() with interrupts enabled.

This caused random crashes on the Altix as the timer interrupt tried
to read a memory mapped clock source, for which the TLB had not yet been
reinstated in the exit, before ipsr was retored.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 28af6a731bb..d20a5db4c4d 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -610,20 +610,22 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	int r;
 
 again:
-	preempt_disable();
-	local_irq_disable();
-
 	if (signal_pending(current)) {
-		local_irq_enable();
-		preempt_enable();
 		r = -EINTR;
 		kvm_run->exit_reason = KVM_EXIT_INTR;
 		goto out;
 	}
 
+	/*
+	 * down_read() may sleep and return with interrupts enabled
+	 */
+	down_read(&vcpu->kvm->slots_lock);
+
+	preempt_disable();
+	local_irq_disable();
+
 	vcpu->guest_mode = 1;
 	kvm_guest_enter();
-	down_read(&vcpu->kvm->slots_lock);
 	r = vti_vcpu_run(vcpu, kvm_run);
 	if (r < 0) {
 		local_irq_enable();
-- 
GitLab


From bf47a760f66add7870fba33ab50f58b550d6bbd1 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Sun, 5 Apr 2009 14:54:46 -0300
Subject: [PATCH 0675/1421] KVM: MMU: disable global page optimization

Complexity to fix it not worthwhile the gains, as discussed
in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 2a36f7f7c4c..b6caf1329b1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1248,7 +1248,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
 	sp->gfn = gfn;
 	sp->role = role;
-	sp->global = role.cr4_pge;
+	sp->global = 0;
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!direct) {
 		if (rmap_write_protect(vcpu->kvm, gfn))
-- 
GitLab


From 4cd481f68dde99ac416003b825c835f71e364393 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Mon, 13 Apr 2009 11:59:32 +0200
Subject: [PATCH 0676/1421] KVM: Fix overlapping check for memory slots

When checking for overlapping slots on registration of a new one, kvm
currently also considers zero-length (ie. deleted) slots and rejects
requests incorrectly. This finally denies user space from joining slots.
Fix the check by skipping deleted slots and advertise this via a
KVM_CAP_JOIN_MEMORY_REGIONS_WORKS.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 include/linux/kvm.h | 2 ++
 virt/kvm/kvm_main.c | 3 ++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 311a073afe8..8cc137911b3 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -409,6 +409,8 @@ struct kvm_trace_rec {
 #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
 #define KVM_CAP_DEVICE_DEASSIGNMENT 27
 #endif
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 28d693a1ee8..1ecbe2391c8 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -961,7 +961,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
 		struct kvm_memory_slot *s = &kvm->memslots[i];
 
-		if (s == memslot)
+		if (s == memslot || !s->npages)
 			continue;
 		if (!((base_gfn + npages <= s->base_gfn) ||
 		      (base_gfn >= s->base_gfn + s->npages)))
@@ -1983,6 +1983,7 @@ static long kvm_dev_ioctl_check_extension_generic(long arg)
 	switch (arg) {
 	case KVM_CAP_USER_MEMORY:
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+	case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS:
 		return 1;
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
 	case KVM_CAP_IRQ_ROUTING:
-- 
GitLab


From 7f1ea208968f021943d4103ba59e06bb6d8239cb Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 25 Feb 2009 16:08:31 +0100
Subject: [PATCH 0677/1421] KVM: x86: release time_page on vcpu destruction

Not releasing the time_page causes a leak of that page or the compound
page it is situated in.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8ca100a9eca..a1ecec5c03e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4159,6 +4159,11 @@ EXPORT_SYMBOL_GPL(kvm_put_guest_fpu);
 
 void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 {
+	if (vcpu->arch.time_page) {
+		kvm_release_page_dirty(vcpu->arch.time_page);
+		vcpu->arch.time_page = NULL;
+	}
+
 	kvm_x86_ops->vcpu_free(vcpu);
 }
 
-- 
GitLab


From 888d256e9c565cb61505bd218eb37c81fe77a325 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Fri, 17 Apr 2009 19:24:58 +0200
Subject: [PATCH 0678/1421] KVM: Unregister cpufreq notifier on unload

Properly unregister cpufreq notifier on onload if it was registered
during init.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a1ecec5c03e..7c1ce5ac613 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2775,6 +2775,9 @@ out:
 
 void kvm_arch_exit(void)
 {
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block,
+					    CPUFREQ_TRANSITION_NOTIFIER);
 	kvm_x86_ops = NULL;
 	kvm_mmu_module_exit();
 }
-- 
GitLab


From 92ea599c9757bc31c279b34737fd79a4f074f91c Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 22 Apr 2009 23:16:21 +1000
Subject: [PATCH 0679/1421] m68knommu: update the default config for the
 ColdFire 5249EVB.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5249evb_defconfig | 268 +++++++++++++++++-----
 1 file changed, 209 insertions(+), 59 deletions(-)

diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
index cc6458333d6..2efba32e33a 100644
--- a/arch/m68knommu/configs/m5249evb_defconfig
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:32:41 2009
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -29,11 +31,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -41,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -92,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -144,45 +151,103 @@ CONFIG_RAMAUTOBIT=y
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -194,6 +259,7 @@ CONFIG_BINFMT_FLAT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -258,6 +324,11 @@ CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -266,14 +337,15 @@ CONFIG_MTD_UCLINUX=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -285,6 +357,56 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -302,7 +424,7 @@ CONFIG_HAVE_IDE=y
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -315,7 +437,6 @@ CONFIG_HAVE_IDE=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -323,7 +444,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -334,19 +456,23 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -356,11 +482,13 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_DAB=y
 
 #
 # Graphics support
@@ -374,10 +502,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -385,7 +509,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -393,18 +520,27 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -427,10 +563,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -440,13 +573,21 @@ CONFIG_SYSFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
@@ -454,6 +595,7 @@ CONFIG_ROMFS_FS=y
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
@@ -468,10 +610,14 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -480,18 +626,22 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 2d4f9efa2a529f352dafd41a616c91531bb13ccd Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 22 Apr 2009 23:30:48 +1000
Subject: [PATCH 0680/1421] m68knommu: update the default config for the
 ColdFire 5257EVB board

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5275evb_defconfig | 167 +++++++++++++---------
 1 file changed, 96 insertions(+), 71 deletions(-)

diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
index 0d1256f5add..dc5c621d419 100644
--- a/arch/m68knommu/configs/m5275evb_defconfig
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 23:29:01 2009
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -44,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -148,44 +152,39 @@ CONFIG_RAMAUTOBIT=y
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -226,6 +225,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -235,7 +235,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -246,14 +248,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -332,6 +328,11 @@ CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -347,6 +348,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -360,7 +362,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -370,10 +372,15 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC=y
 CONFIG_FEC2=y
@@ -385,8 +392,10 @@ CONFIG_FEC2=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -421,7 +430,7 @@ CONFIG_SLHC=y
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -434,7 +443,6 @@ CONFIG_SLHC=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -442,7 +450,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -453,19 +462,23 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -476,6 +489,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -494,10 +508,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -505,7 +515,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -513,12 +526,14 @@ CONFIG_DAB=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -526,6 +541,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -548,10 +568,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -561,21 +578,21 @@ CONFIG_SYSFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
@@ -598,10 +615,14 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -610,18 +631,22 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 7a6f9cbb37120c745fc187083fb5c3de4dca4f97 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Tue, 21 Apr 2009 20:00:37 +0200
Subject: [PATCH 0681/1421] x86: hpet: fix periodic mode programming on AMD
 81xx

(See http://bugzilla.kernel.org/show_bug.cgi?id=12961)

It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403
(x86: hpet: stop HPET_COUNTER when programming periodic mode)

HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL
cleared) to T0_CMP register to set the period in periodic mode.

With this patch HPET_COUNTER is still stopped but not reset when HPET
is programmed in periodic mode. This should help to avoid races when
HPET is programmed in periodic mode and fixes a boot time hang that
I've observed on a machine when using 1000HZ.

[ Impact: fix boot time hang on machines with AMD 81xx chipset ]

Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Jeff Mahoney <jeffm@suse.com>
LKML-Reference: <20090421180037.GA2763@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/hpet.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 3f0019e0a22..81408b93f88 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -236,6 +236,10 @@ static void hpet_stop_counter(void)
 	unsigned long cfg = hpet_readl(HPET_CFG);
 	cfg &= ~HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
 	hpet_writel(0, HPET_COUNTER);
 	hpet_writel(0, HPET_COUNTER + 4);
 }
@@ -250,6 +254,7 @@ static void hpet_start_counter(void)
 static void hpet_restart_counter(void)
 {
 	hpet_stop_counter();
+	hpet_reset_counter();
 	hpet_start_counter();
 }
 
@@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq);
 static void hpet_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt, int timer)
 {
-	unsigned long cfg;
+	unsigned long cfg, cmp, now;
 	uint64_t delta;
 
 	switch (mode) {
@@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode,
 		hpet_stop_counter();
 		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
 		delta >>= evt->shift;
+		now = hpet_readl(HPET_COUNTER);
+		cmp = now + (unsigned long) delta;
 		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		/* Make sure we use edge triggered interrupts */
 		cfg &= ~HPET_TN_LEVEL;
 		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 		       HPET_TN_SETVAL | HPET_TN_32BIT;
 		hpet_writel(cfg, HPET_Tn_CFG(timer));
+		hpet_writel(cmp, HPET_Tn_CMP(timer));
+		udelay(1);
+		/*
+		 * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+		 * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+		 * bit is automatically cleared after the first write.
+		 * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+		 * Publication # 24674)
+		 */
 		hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
 		hpet_start_counter();
 		hpet_print_config();
-- 
GitLab


From 73fc267615fd547538d4afb602f51de6b5ab0a31 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 23 Apr 2009 00:11:23 +1000
Subject: [PATCH 0682/1421] m68knommu: update the default config for the
 ColdFire 5307C3 board

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5307c3_defconfig | 231 ++++++++++++++++-------
 1 file changed, 163 insertions(+), 68 deletions(-)

diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
index fe2acdfa4d7..3a3f6733ae4 100644
--- a/arch/m68knommu/configs/m5307c3_defconfig
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,10 +34,21 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -44,44 +56,37 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,7 +100,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -127,12 +132,11 @@ CONFIG_CLOCK_DIV=2
 #
 # CONFIG_ARN5307 is not set
 CONFIG_M5307C3=y
-# CONFIG_eLIA is not set
 # CONFIG_SECUREEDGEMP3 is not set
 # CONFIG_CLEOPATRA is not set
 # CONFIG_NETtel is not set
 CONFIG_FREESCALE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
 CONFIG_HZ=100
 
 #
@@ -153,45 +157,36 @@ CONFIG_RAMAUTOBIT=y
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -232,6 +227,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -241,7 +237,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -252,14 +250,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -274,7 +266,79 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -286,6 +350,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -299,7 +364,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -309,10 +374,15 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -322,8 +392,10 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -381,7 +453,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -394,13 +466,12 @@ CONFIG_INPUT=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
@@ -413,19 +484,23 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -436,6 +511,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -454,10 +530,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -466,7 +538,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -474,12 +549,14 @@ CONFIG_DAB=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -487,6 +564,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -509,10 +591,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -520,14 +599,22 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -551,10 +638,14 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 CONFIG_FULLDEBUG=y
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -563,18 +654,22 @@ CONFIG_FULLDEBUG=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From c5428e950ad42640f00092949fd17e356dfdeafa Mon Sep 17 00:00:00 2001
From: Coly Li <coly.li@suse.de>
Date: Wed, 22 Apr 2009 23:21:56 +0800
Subject: [PATCH 0683/1421] uv_time: add parameter to uv_read_rtc()

uv_read_rtc() is referenced by read member of struct clocksource clocksource_uv.
In include/linux/clocksource.h, read of struct clocksource is declared as:
cycle_t (*read)(struct clocksource *cs)

This got introduced recently in:

   8e19608: clocksource: pass clocksource to read() callback

But arch/x86/kernel/uv_time.c was not properly converted by that pach.

This patch adds a dummy parameter (struct clocksource type) to uv_read_rtc() to
fix the incompatible reference in clocksource_uv, and add a NULL parameter in
all places where uv_read_rtc() gets called.

[ Impact: cleanup, address compiler warning ]

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hugh@veritas.com>
LKML-Reference: <49EF3614.1050806@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Dimitri Sivanich <sivanich@sgi.com>
---
 arch/x86/kernel/uv_time.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
index 2ffb6c53326..583f11d5c48 100644
--- a/arch/x86/kernel/uv_time.c
+++ b/arch/x86/kernel/uv_time.c
@@ -29,7 +29,7 @@
 
 #define RTC_NAME		"sgi_rtc"
 
-static cycle_t uv_read_rtc(void);
+static cycle_t uv_read_rtc(struct clocksource *cs);
 static int uv_rtc_next_event(unsigned long, struct clock_event_device *);
 static void uv_rtc_timer_setup(enum clock_event_mode,
 				struct clock_event_device *);
@@ -123,7 +123,7 @@ static int uv_setup_intr(int cpu, u64 expires)
 	/* Initialize comparator value */
 	uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
 
-	return (expires < uv_read_rtc() && !uv_intr_pending(pnode));
+	return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
 }
 
 /*
@@ -256,7 +256,7 @@ static int uv_rtc_unset_timer(int cpu)
 
 	spin_lock_irqsave(&head->lock, flags);
 
-	if (head->next_cpu == bcpu && uv_read_rtc() >= *t)
+	if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
 		rc = 1;
 
 	*t = ULLONG_MAX;
@@ -278,7 +278,7 @@ static int uv_rtc_unset_timer(int cpu)
 /*
  * Read the RTC.
  */
-static cycle_t uv_read_rtc(void)
+static cycle_t uv_read_rtc(struct clocksource *cs)
 {
 	return (cycle_t)uv_read_local_mmr(UVH_RTC);
 }
@@ -291,7 +291,7 @@ static int uv_rtc_next_event(unsigned long delta,
 {
 	int ced_cpu = cpumask_first(ced->cpumask);
 
-	return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc());
+	return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL));
 }
 
 /*
-- 
GitLab


From db2f38c22ea3f545be3b5772e5f9dc5861b74536 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 22 Apr 2009 20:33:40 +0200
Subject: [PATCH 0684/1421] palm_bk3710: UDMA performance fix

Fix UDMA throughput bug:  tCYC averages t2CYCTYP/2, but the code
previously assumed it was the same as t2CYCTYP.  (That is, it was
using just one clock edge, not both.)  Move the table's type
declaration so it's adjacent to the table, making it more clear
what those numbers mean.

On one system this change increased throughput by almost 4x: UDMA/66
sometimes topped 23 MB/sec (on a drive known to do much better).  On
another system it was around a 10% win (UDMA/66 up to 7+ MB/sec).

The difference might be caused by the ratio between memory and IDE
clocks.  In the system with large speedup, this was exactly 2 (as a
workaround for a rev 1.1 silicon bug).  The other system used a more
standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch
might have some issues, they're not unheard-of.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/palm_bk3710.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index c7acca0b873..d1513b4a457 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -39,14 +39,6 @@
 /* Primary Control Offset */
 #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
 
-/*
- * PalmChip 3710 IDE Controller UDMA timing structure Definition
- */
-struct palm_bk3710_udmatiming {
-	unsigned int rptime;	/* Ready to pause time  */
-	unsigned int cycletime;	/* Cycle Time           */
-};
-
 #define BK3710_BMICP		0x00
 #define BK3710_BMISP		0x02
 #define BK3710_BMIDTP		0x04
@@ -75,13 +67,19 @@ struct palm_bk3710_udmatiming {
 
 static unsigned ideclk_period; /* in nanoseconds */
 
+struct palm_bk3710_udmatiming {
+	unsigned int rptime;	/* tRP -- Ready to pause time (nsec) */
+	unsigned int cycletime;	/* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+				/* tENV is always a minimum of 20 nsec */
+};
+
 static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
-	{160, 240},		/* UDMA Mode 0 */
-	{125, 160},		/* UDMA Mode 1 */
-	{100, 120},		/* UDMA Mode 2 */
-	{100, 90},		/* UDMA Mode 3 */
-	{100, 60},		/* UDMA Mode 4 */
-	{85,  40},		/* UDMA Mode 5 */
+	{160, 240 / 2,},	/* UDMA Mode 0 */
+	{125, 160 / 2,},	/* UDMA Mode 1 */
+	{100, 120 / 2,},	/* UDMA Mode 2 */
+	{100, 90 / 2,},		/* UDMA Mode 3 */
+	{100, 60 / 2,},		/* UDMA Mode 4 */
+	{85,  40 / 2,},		/* UDMA Mode 5 */
 };
 
 static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
-- 
GitLab


From a1f9a89c90b4ac143c5b6054c2a157572b272cd2 Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Wed, 22 Apr 2009 20:33:40 +0200
Subject: [PATCH 0685/1421] ide-cd: fix kernel crash on hppa regression

With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture
due to ide-cd when udev creates the device nodes at startup:

Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024)
IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0
 IIR: 4ab30048    ISR: 00000000  IOR: 00000024
 CPU:        0   CR30: 8ed34000 CR31: ffff55ff
 ORIG_R28: 00000000
 IAOQ[0]: ide_complete_rq+0x2c/0x70
 IAOQ[1]: ide_complete_rq+0x30/0x70
 RP(r2): cdrom_newpc_intr+0x178/0x46c
Backtrace:
 [<1035c608>] cdrom_newpc_intr+0x178/0x46c
 [<1034c494>] ide_intr+0x1b0/0x214
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<102f7864>] superio_interrupt+0x88/0xbc
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<10112efc>] do_cpu_irq_mask+0x9c/0xd0
 [<10116068>] intr_return+0x0/0x4

This crash seems to happen due to an uninitialized variable "rc".
The compiler even warns about that:
  CC      drivers/ide/ide-cd.o
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr':
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function

After applying the trivial patch below, which just initializes
the variable to zero, the kernel doesn't crash any longer:

Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
done.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Linus <torvalds@linux-foundation.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 3aec19d1fdf..3d4e0996976 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -609,7 +609,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	struct request *rq = hwif->rq;
 	ide_expiry_t *expiry = NULL;
 	int dma_error = 0, dma, thislen, uptodate = 0;
-	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors;
+	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
 	int sense = blk_sense_request(rq);
 	unsigned int timeout;
 	u16 len;
-- 
GitLab


From b0aedb04eae79372fbe101d98513773d6b89935d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= <bonbons@linux-vserver.org>
Date: Wed, 22 Apr 2009 20:33:41 +0200
Subject: [PATCH 0686/1421] ide: Stop disks on reboot for laptop which cuts
 power
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

My laptop (Acer Travelmate 660) always cuts the power when rebooting
which causes the disk to emergency-park it's head.

Add a dmi check to stop disk as for shutdown on this laptop.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-gd.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 1aebdf1a4f5..4b6b71e2cdf 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -7,6 +7,7 @@
 #include <linux/mutex.h>
 #include <linux/ide.h>
 #include <linux/hdreg.h>
+#include <linux/dmi.h>
 
 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
 #define IDE_DISK_MINORS		(1 << PARTN_BITS)
@@ -99,6 +100,19 @@ static void ide_gd_resume(ide_drive_t *drive)
 		(void)drive->disk_ops->get_capacity(drive);
 }
 
+static const struct dmi_system_id ide_coldreboot_table[] = {
+	{
+		/* Acer TravelMate 66x cuts power during reboot */
+		.ident   = "Acer TravelMate 660",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+		},
+	},
+
+	{ }	/* terminate list */
+};
+
 static void ide_gd_shutdown(ide_drive_t *drive)
 {
 #ifdef	CONFIG_ALPHA
@@ -115,7 +129,8 @@ static void ide_gd_shutdown(ide_drive_t *drive)
 	   the disk to expire its write cache. */
 	if (system_state != SYSTEM_POWER_OFF) {
 #else
-	if (system_state == SYSTEM_RESTART) {
+	if (system_state == SYSTEM_RESTART &&
+		!dmi_check_system(ide_coldreboot_table)) {
 #endif
 		drive->disk_ops->flush(drive);
 		return;
-- 
GitLab


From 83cff839268feb2f31ae7667b9b2b7641dc10575 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 22 Apr 2009 20:33:41 +0200
Subject: [PATCH 0687/1421] mediabay: fix build for CONFIG_BLOCK=n
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote:
> Observed the following build error:
> ---
> CC      drivers/macintosh/mediabay.o
> In file included from drivers/macintosh/mediabay.c:21:
> include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete
> type
> make[2]: *** [drivers/macintosh/mediabay.o] Error 1
> make[1]: *** [drivers/macintosh] Error 2
> make: *** [drivers] Error 2
> ---

mediabay shouldn't include <linux/ide.h> unconditionally so
remove the superfluous include from mediabay.c (<asm/mediabay.h>
will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y).

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/macintosh/mediabay.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index d7e46d345d9..eca55ef185b 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -18,7 +18,6 @@
 #include <linux/timer.h>
 #include <linux/stddef.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <asm/prom.h>
-- 
GitLab


From 2d138ae09935cec055f65d18300727a7a46d92b9 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Thu, 9 Apr 2009 21:22:42 +0200
Subject: [PATCH 0688/1421] scsi: a4000 - Correct driver unregistration in case
 of failure

commit 7a192ec334cab9fafe3a8665a65af398b0e24730 ("platform driver: fix
incorrect use of 'platform_bus_type' with 'struct device_driver') turned a
driver_UNregister into platform_driver_REGISTER. Correct this to
platform_driver_UNregister.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/scsi/a4000t.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c
index 61af3d91ac8..e3519fa5a3b 100644
--- a/drivers/scsi/a4000t.c
+++ b/drivers/scsi/a4000t.c
@@ -129,7 +129,7 @@ static int __init a4000t_scsi_init(void)
 	a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
 			-1, NULL, 0);
 	if (IS_ERR(a4000t_scsi_device)) {
-		platform_driver_register(&a4000t_scsi_driver);
+		platform_driver_unregister(&a4000t_scsi_driver);
 		return PTR_ERR(a4000t_scsi_device);
 	}
 
-- 
GitLab


From cc7c0fa3b90a047751f50371639b90dc119e63ea Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Thu, 9 Apr 2009 22:23:51 +0200
Subject: [PATCH 0689/1421] m68k,m68knommu: Wire up preadv and pwritev

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/unistd.h       | 4 +++-
 arch/m68k/kernel/entry.S             | 2 ++
 arch/m68knommu/kernel/syscalltable.S | 2 ++
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 3c19027331f..aa29a8640f7 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -332,10 +332,12 @@
 #define __NR_dup3		326
 #define __NR_pipe2		327
 #define __NR_inotify_init1	328
+#define __NR_preadv		329
+#define __NR_pwritev		330
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		329
+#define NR_syscalls		331
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 5c332f2b9b8..8744f60c07a 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -753,4 +753,6 @@ sys_call_table:
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 330 */
 
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 1017e76f371..c0b8782832f 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -347,6 +347,8 @@ ENTRY(sys_call_table)
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 330 */
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
-- 
GitLab


From adfe7c69891128f5e238a5e6823709b4bb85b340 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 29 Mar 2009 14:23:44 +0200
Subject: [PATCH 0690/1421] m68k: Update defconfigs for 2.6.30-rc3

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/configs/amiga_defconfig    | 163 +++++++++++++++++----------
 arch/m68k/configs/apollo_defconfig   | 120 +++++++++++++-------
 arch/m68k/configs/atari_defconfig    | 155 ++++++++++++++++---------
 arch/m68k/configs/bvme6000_defconfig | 119 ++++++++++++-------
 arch/m68k/configs/hp300_defconfig    | 120 +++++++++++++-------
 arch/m68k/configs/mac_defconfig      | 125 +++++++++++++-------
 arch/m68k/configs/multi_defconfig    | 157 ++++++++++++++++----------
 arch/m68k/configs/mvme147_defconfig  | 119 ++++++++++++-------
 arch/m68k/configs/mvme16x_defconfig  | 119 ++++++++++++-------
 arch/m68k/configs/q40_defconfig      | 122 +++++++++++++-------
 arch/m68k/configs/sun3_defconfig     | 120 +++++++++++++-------
 arch/m68k/configs/sun3x_defconfig    | 120 +++++++++++++-------
 12 files changed, 1034 insertions(+), 525 deletions(-)

diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 23597beb66c..0f69fa5ddf2 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:42 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:52 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -157,7 +169,7 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ZORRO=y
 CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
@@ -184,7 +196,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
@@ -258,6 +273,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +282,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +293,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +372,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +407,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +421,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,15 +468,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -469,7 +489,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -478,7 +497,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
 
@@ -530,6 +548,8 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -547,6 +567,7 @@ CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -554,7 +575,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -567,6 +588,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -577,14 +599,16 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -609,7 +633,10 @@ CONFIG_APNE=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -719,7 +746,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
 
 #
 # Serial drivers
@@ -730,6 +757,7 @@ CONFIG_A2232=m
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -821,6 +849,7 @@ CONFIG_FB_FM2=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -856,7 +885,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -867,14 +895,13 @@ CONFIG_HID_COMPAT=y
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
+CONFIG_SERIAL_CONSOLE=y
 
 #
 # File systems
@@ -883,6 +910,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -909,13 +937,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -923,6 +953,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -935,8 +970,8 @@ CONFIG_UDF_NLS=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -954,10 +989,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -966,6 +998,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -976,23 +1011,24 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1067,11 +1103,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1092,13 +1123,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1113,7 +1152,7 @@ CONFIG_CRYPTO_SEQIV=m
 #
 # Block modes
 #
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
@@ -1132,7 +1171,7 @@ CONFIG_CRYPTO_XCBC=m
 #
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -1154,7 +1193,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -1168,6 +1207,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1175,11 +1215,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1191,10 +1233,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 935108d115a..5fff58196b3 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:43 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:54 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -256,6 +268,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -264,6 +277,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -274,6 +288,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -352,25 +367,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -392,8 +402,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -404,8 +416,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -441,9 +453,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,8 +507,11 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -522,6 +542,8 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -538,7 +560,10 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -596,7 +621,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -636,6 +660,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -718,6 +743,7 @@ CONFIG_FB_APOLLO=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -749,7 +775,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -774,6 +799,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -800,13 +826,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -814,6 +842,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -845,10 +878,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -857,6 +887,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -867,6 +900,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -883,7 +917,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -958,11 +991,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -983,13 +1011,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1059,6 +1095,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1066,11 +1103,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1082,10 +1121,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index a594a1d47b6..d92a90e03ec 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:44 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:56 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -180,7 +192,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
@@ -254,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -262,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -272,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -350,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -390,8 +403,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -402,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,15 +460,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -461,7 +481,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -516,11 +535,14 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -528,7 +550,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -541,6 +563,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -550,7 +573,9 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -568,7 +593,10 @@ CONFIG_ATARILANCE=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -625,11 +653,10 @@ CONFIG_INPUT_KEYBOARD=y
 CONFIG_ATARI_KBD_CORE=y
 CONFIG_KEYBOARD_ATARI=y
 CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -649,7 +676,7 @@ CONFIG_INPUT_M68K_BEEP=m
 CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -673,6 +700,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -760,6 +788,7 @@ CONFIG_FB_ATARI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -794,7 +823,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -805,14 +833,14 @@ CONFIG_HID_COMPAT=y
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
+CONFIG_SERIAL_CONSOLE=y
 
 #
 # File systems
@@ -821,6 +849,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -847,13 +876,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -861,6 +892,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -892,10 +928,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -904,6 +937,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -914,22 +950,24 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1004,11 +1042,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1029,13 +1062,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1050,7 +1091,7 @@ CONFIG_CRYPTO_SEQIV=m
 #
 # Block modes
 #
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
@@ -1069,7 +1110,7 @@ CONFIG_CRYPTO_XCBC=m
 #
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -1091,7 +1132,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -1105,6 +1146,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1112,11 +1154,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
@@ -1128,10 +1172,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index d3d9814a91d..6e6b1aa6668 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:45 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:59 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,6 +547,8 @@ CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_BVME6000_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -543,7 +565,10 @@ CONFIG_BVME6000_NET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -717,7 +742,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -742,6 +766,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -768,13 +793,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -782,6 +809,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -813,10 +845,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -825,6 +854,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -835,6 +867,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -851,7 +884,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -927,11 +959,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -952,13 +979,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1028,6 +1063,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1035,11 +1071,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1051,10 +1089,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 5556ef088d0..bc0565f63a1 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:46 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:01 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -141,12 +152,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -257,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -265,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -275,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -353,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -393,8 +403,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -405,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,9 +454,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -492,8 +508,11 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -501,7 +520,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -514,6 +533,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -524,6 +544,8 @@ CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_HPLANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -540,7 +562,10 @@ CONFIG_HPLANCE=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -646,6 +670,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -728,6 +753,7 @@ CONFIG_FB_HP300=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -759,7 +785,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -767,9 +792,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -782,6 +807,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -808,13 +834,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -822,6 +850,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -853,10 +886,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -865,6 +895,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -875,6 +908,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -891,7 +925,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -966,11 +999,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -991,13 +1019,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1067,6 +1103,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1074,11 +1111,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1090,10 +1129,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index c6de25724a2..9991b64fea5 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:47 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:03 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -142,12 +153,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@ CONFIG_IPDDP_DECAP=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -429,6 +441,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_SWIM=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -443,15 +456,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -459,7 +477,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -514,10 +531,13 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -525,7 +545,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -547,6 +567,7 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -561,6 +582,8 @@ CONFIG_MAC89x0=m
 CONFIG_MACSONIC=m
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -577,7 +600,10 @@ CONFIG_MACMACE=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -635,7 +661,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -677,6 +702,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -760,6 +786,7 @@ CONFIG_FB_MAC=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -793,7 +820,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -801,9 +827,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -819,6 +845,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -845,13 +872,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -859,6 +888,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -890,10 +924,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=y
@@ -902,6 +933,9 @@ CONFIG_HFSPLUS_FS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -912,6 +946,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -927,7 +962,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1003,11 +1037,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1028,13 +1057,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1104,6 +1141,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1111,11 +1149,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1127,10 +1167,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 70693588031..69c43e2d8b4 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:48 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:06 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -146,12 +157,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -268,6 +280,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -276,6 +289,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -286,6 +300,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -364,25 +379,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -408,8 +418,10 @@ CONFIG_IPDDP_DECAP=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -420,8 +432,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -454,6 +466,7 @@ CONFIG_PARPORT_NOT_PC=y
 CONFIG_BLK_DEV=y
 CONFIG_AMIGA_FLOPPY=y
 CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_SWIM=y
 CONFIG_AMIGA_Z2RAM=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -469,15 +482,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -485,7 +503,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -494,7 +511,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
@@ -549,6 +565,8 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -575,6 +593,7 @@ CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -582,7 +601,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -604,6 +623,7 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -614,24 +634,26 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
 CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
+CONFIG_MAC89x0=y
+CONFIG_MACSONIC=y
 CONFIG_MACMACE=y
 CONFIG_MVME147_NET=y
 CONFIG_MVME16x_NET=y
 CONFIG_BVME6000_NET=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
 CONFIG_SUN3LANCE=y
 CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -657,7 +679,10 @@ CONFIG_NE2000=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -717,11 +742,10 @@ CONFIG_KEYBOARD_ATARI=y
 CONFIG_KEYBOARD_HIL_OLD=y
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -732,7 +756,7 @@ CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_AMIGA=m
 CONFIG_MOUSE_ATARI=m
 # CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
+CONFIG_MOUSE_HIL=y
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
 # CONFIG_JOYSTICK_A3D is not set
@@ -763,18 +787,18 @@ CONFIG_JOYSTICK_AMIGA=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=m
+CONFIG_HP_SDC_RTC=y
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=m
+CONFIG_SERIO_Q40KBD=y
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_HP_SDC=y
 CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -788,7 +812,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
 
 #
 # Serial drivers
@@ -799,6 +823,7 @@ CONFIG_A2232=m
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -807,7 +832,7 @@ CONFIG_PRINTER=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -898,6 +923,7 @@ CONFIG_FB_HP300=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -937,7 +963,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -948,13 +973,12 @@ CONFIG_HID_COMPAT=y
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_MULTIFACE_III_TTY=m
@@ -974,6 +998,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1000,13 +1025,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -1014,6 +1041,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1045,10 +1077,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=y
@@ -1057,6 +1086,9 @@ CONFIG_HFSPLUS_FS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -1067,6 +1099,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1083,7 +1116,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1163,11 +1195,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1188,13 +1215,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1264,6 +1299,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1271,11 +1307,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
@@ -1287,10 +1325,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 52d42715bd0..7dceb5d7122 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:50 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:08 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,9 +509,12 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -503,7 +522,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -516,6 +535,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -526,6 +546,8 @@ CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MVME147_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -542,7 +564,10 @@ CONFIG_MVME147_NET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -640,6 +664,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -716,7 +741,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -724,9 +748,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -741,6 +765,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -767,13 +792,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -781,6 +808,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -812,10 +844,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -824,6 +853,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -834,6 +866,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -850,7 +883,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -926,11 +958,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -951,13 +978,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1027,6 +1062,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1034,11 +1070,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1050,10 +1088,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 3403ed2eda7..890594fcacb 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:51 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:10 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,6 +547,8 @@ CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MVME16x_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -543,7 +565,10 @@ CONFIG_MVME16x_NET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -717,7 +742,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -743,6 +767,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -769,13 +794,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -783,6 +810,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -814,10 +846,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -826,6 +855,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -836,6 +868,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -852,7 +885,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -928,11 +960,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -953,13 +980,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1029,6 +1064,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1036,11 +1072,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1052,10 +1090,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 3459c594194..7cf58c27ff8 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:52 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:13 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -391,8 +401,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -441,15 +453,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -457,7 +474,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -516,6 +532,8 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -527,6 +545,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -534,7 +553,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -547,6 +566,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -559,7 +579,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -584,7 +606,10 @@ CONFIG_NE2000=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -642,7 +667,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -688,6 +712,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -771,6 +796,7 @@ CONFIG_FB_Q40=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -805,7 +831,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -813,9 +838,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -828,6 +853,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -854,13 +880,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -868,6 +896,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -899,10 +932,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -911,6 +941,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -921,6 +954,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -936,7 +970,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1011,11 +1044,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1036,13 +1064,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1112,6 +1148,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1119,11 +1156,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1135,10 +1174,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index f404917429f..f27c1a47bac 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:53 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:16 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -138,12 +149,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -253,6 +265,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -261,6 +274,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -271,6 +285,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -349,25 +364,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -389,8 +399,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -401,8 +413,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,9 +450,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -488,9 +504,12 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -498,7 +517,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -511,6 +530,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -522,6 +542,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_SUN3LANCE=y
 CONFIG_SUN3_82586=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,7 +559,10 @@ CONFIG_SUN3_82586=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -595,7 +620,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -635,6 +659,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -710,6 +735,7 @@ CONFIG_FB=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -741,16 +767,15 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -763,6 +788,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -789,13 +815,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -803,6 +831,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -834,10 +867,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -846,6 +876,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -856,6 +889,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -872,7 +906,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -948,11 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -973,13 +1001,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1049,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1056,11 +1093,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1072,9 +1111,12 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 4d8a1e84e39..c40edb919fd 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:54 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:20 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -391,8 +401,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -440,9 +452,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,9 +506,12 @@ CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -523,6 +543,8 @@ CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -539,7 +561,10 @@ CONFIG_SUN3LANCE=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -597,7 +622,6 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -637,6 +661,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -718,6 +743,7 @@ CONFIG_FB=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -749,7 +775,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -772,6 +797,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -798,13 +824,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -812,6 +840,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -843,10 +876,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -855,6 +885,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -865,6 +898,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -881,7 +915,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -957,11 +990,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -982,13 +1010,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1058,6 +1094,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1065,11 +1102,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1081,10 +1120,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 162dedd39dcc6eca3fc0d29cf19658c6c13b840e Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Fri, 3 Apr 2009 06:34:00 -0700
Subject: [PATCH 0691/1421] PCI quirk: disable MSI on VIA VT3364 chipsets

Without this patch, Broadcom BCM5906 Ethernet controllers set up via MSI
cause the machine to hang.  Tejun agreed that the best is to blacklist
the whole chipset and after adding it, seeing the other VIA quirks
disabling MSI, this very much looks like the right way.

Cc: <stable@kernel.org>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 0254741bece..3067673d54f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2033,6 +2033,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_di
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
 
 /* Disable MSI on chipsets that are known to not support it */
 static void __devinit quirk_disable_msi(struct pci_dev *dev)
-- 
GitLab


From 6298c512bc1007c3ff5c9ce20e6996781651cc45 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Apr 2009 12:28:22 +0200
Subject: [PATCH 0692/1421] x86, mce: make polling timer interval per CPU

The polling timer while running per CPU still uses a global next_interval
variable, which lead to some CPUs either polling too fast or too slow.
This was not a serious problem because all errors get picked up eventually,
but it's still better to avoid it. Turn next_interval into a per cpu variable.

v2: Fix check_interval == 0 case (Hidetoshi Seto)

[ Impact: minor bug fix ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/mcheck/mce_64.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 863f89568b1..82614f1b923 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -452,13 +452,14 @@ void mce_log_therm_throt_event(__u64 status)
  */
 
 static int check_interval = 5 * 60; /* 5 minutes */
-static int next_interval; /* in jiffies */
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
 static void mcheck_timer(unsigned long);
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
 static void mcheck_timer(unsigned long data)
 {
 	struct timer_list *t = &per_cpu(mce_timer, data);
+	int *n;
 
 	WARN_ON(smp_processor_id() != data);
 
@@ -470,14 +471,14 @@ static void mcheck_timer(unsigned long data)
 	 * Alert userspace if needed.  If we logged an MCE, reduce the
 	 * polling interval, otherwise increase the polling interval.
 	 */
+	n = &__get_cpu_var(next_interval);
 	if (mce_notify_user()) {
-		next_interval = max(next_interval/2, HZ/100);
+		*n = max(*n/2, HZ/100);
 	} else {
-		next_interval = min(next_interval * 2,
-				(int)round_jiffies_relative(check_interval*HZ));
+		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
 	}
 
-	t->expires = jiffies + next_interval;
+	t->expires = jiffies + *n;
 	add_timer(t);
 }
 
@@ -632,14 +633,13 @@ static void mce_cpu_features(struct cpuinfo_x86 *c)
 static void mce_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
+	int *n = &__get_cpu_var(next_interval);
 
-	/* data race harmless because everyone sets to the same value */
-	if (!next_interval)
-		next_interval = check_interval * HZ;
-	if (!next_interval)
+	*n = check_interval * HZ;
+	if (!*n)
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
-	t->expires = round_jiffies(jiffies + next_interval);
+	t->expires = round_jiffies(jiffies + *n);
 	add_timer(t);
 }
 
@@ -907,7 +907,6 @@ static void mce_cpu_restart(void *data)
 /* Reinit MCEs after user configuration changes */
 static void mce_restart(void)
 {
-	next_interval = check_interval * HZ;
 	on_each_cpu(mce_cpu_restart, NULL, 1);
 }
 
@@ -1110,7 +1109,8 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 		break;
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies(jiffies + next_interval);
+		t->expires = round_jiffies(jiffies +
+						__get_cpu_var(next_interval));
 		add_timer_on(t, cpu);
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;
-- 
GitLab


From 5679af4c1625a1534a4321e1ecc3c48a1cf65eb8 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Tue, 7 Apr 2009 17:06:55 +0200
Subject: [PATCH 0693/1421] x86, mce: fix boot logging logic

The earlier patch to change the poller to a separate function subtly
broke the boot logging logic. This could lead to machine checks
getting logged at boot even when disabled or defaulting to off
on some systems. Fix that.

[ Impact: bug fix - avoid spurious MCE in log ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/mce.h          | 1 +
 arch/x86/kernel/cpu/mcheck/mce_64.c | 9 +++++----
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 563933e06a3..4f8c199584e 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
 enum mcp_flags {
 	MCP_TIMESTAMP = (1 << 0),	/* log time stamp */
 	MCP_UC = (1 << 1),		/* log uncorrected errors */
+	MCP_DONTLOG = (1 << 2),		/* only clear, don't log */
 };
 extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 82614f1b923..6fb0b359d2a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		 * Don't get the IP here because it's unlikely to
 		 * have anything to do with the actual error location.
 		 */
-
-		mce_log(&m);
-		add_taint(TAINT_MACHINE_CHECK);
+		if (!(flags & MCP_DONTLOG)) {
+			mce_log(&m);
+			add_taint(TAINT_MACHINE_CHECK);
+		}
 
 		/*
 		 * Clear state for this bank.
@@ -585,7 +586,7 @@ static void mce_init(void *dummy)
 	 * Log the machine checks left over from the previous reset.
 	 */
 	bitmap_fill(all_banks, MAX_NR_BANKS);
-	machine_check_poll(MCP_UC, &all_banks);
+	machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
 
 	set_in_cr4(X86_CR4_MCE);
 
-- 
GitLab


From 044cd80942e47b9de0915b627902adf05c52377f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 18 Apr 2009 01:43:46 -0700
Subject: [PATCH 0694/1421] x86/PCI: don't call e820_all_mapped with -1 in the
 mmconfig case

e820_all_mapped need end is (addr + size) instead of (addr + size - 1)

Cc: stable@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/mmconfig-shared.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 905bb526b13..5fa10bb9604 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
 		if (!fixmem32)
 			return AE_OK;
 		if ((mcfg_res->start >= fixmem32->address) &&
-		    (mcfg_res->end < (fixmem32->address +
+		    (mcfg_res->end <= (fixmem32->address +
 				      fixmem32->address_length))) {
 			mcfg_res->flags = 1;
 			return AE_CTRL_TERMINATE;
@@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
 		return AE_OK;
 
 	if ((mcfg_res->start >= address.minimum) &&
-	    (mcfg_res->end < (address.minimum + address.address_length))) {
+	    (mcfg_res->end <= (address.minimum + address.address_length))) {
 		mcfg_res->flags = 1;
 		return AE_CTRL_TERMINATE;
 	}
@@ -439,7 +439,7 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved,
 	u64 old_size = size;
 	int valid = 0;
 
-	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+	while (!is_reserved(addr, addr + size, E820_RESERVED)) {
 		size >>= 1;
 		if (size < (16UL<<20))
 			break;
-- 
GitLab


From 0bb1be3e30bfc3e09fa0ff1e887ac7da4a16c3a2 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Thu, 16 Apr 2009 13:31:10 -0600
Subject: [PATCH 0695/1421] x86/PCI: Move set_pci_bus_resources_arch_default
 into arch/x86

Commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 introduced a new
function to set the PCI bus resources.  Unfortunately, neither the
author, nor the committers seemed to know that we already have somewhere
to do that -- pcibios_fixup_bus().  This patch moves the hook (used only
by the K8 code) into x86-specific code where it should have been in the
first place.

Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/common.c | 7 ++++++-
 drivers/pci/probe.c   | 6 ------
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8c362b96b64..f80ece51305 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -142,15 +142,20 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 	}
 }
 
+void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b)
+{
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
  */
 
-void __devinit  pcibios_fixup_bus(struct pci_bus *b)
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
 {
 	struct pci_dev *dev;
 
+	set_pci_bus_resources_arch_default(b);
 	pci_read_bridge_bases(b);
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8eb50dffb78..e3c3e081b83 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1118,10 +1118,6 @@ unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
 	return max;
 }
 
-void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b)
-{
-}
-
 struct pci_bus * pci_create_bus(struct device *parent,
 		int bus, struct pci_ops *ops, void *sysdata)
 {
@@ -1180,8 +1176,6 @@ struct pci_bus * pci_create_bus(struct device *parent,
 	b->resource[0] = &ioport_resource;
 	b->resource[1] = &iomem_resource;
 
-	set_pci_bus_resources_arch_default(b);
-
 	return b;
 
 dev_create_file_err:
-- 
GitLab


From ca8e34f2b05a8289b47907b083dc01dd654ecbde Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Wed, 22 Apr 2009 16:27:12 -0500
Subject: [PATCH 0696/1421] eCryptfs: Lock lower directory inode mutex during
 lookup

This patch locks the lower directory inode's i_mutex before calling
lookup_one_len() to find the appropriate dentry in the lower filesystem.
This bug was found thanks to the warning set in commit 2f9092e1.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/inode.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 5ed86e25b8a..d8325263ba6 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -379,9 +379,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 		goto out_d_drop;
 	}
 	lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
 	lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
 				      lower_dir_dentry,
 				      ecryptfs_dentry->d_name.len);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
 		printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
@@ -406,9 +408,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 		       "filename; rc = [%d]\n", __func__, rc);
 		goto out_d_drop;
 	}
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
 	lower_dentry = lookup_one_len(encrypted_and_encoded_name,
 				      lower_dir_dentry,
 				      encrypted_and_encoded_name_size - 1);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
 		printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
-- 
GitLab


From 0e94ecd098347874e776f7818728613a335880d1 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 18 Apr 2009 10:11:25 -0700
Subject: [PATCH 0697/1421] x86/PCI: set_pci_bus_resources_arch_default
 cleanups

Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move
the weak version from common.c to i386.c, and before calling, make sure it's a
root bus.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/include/asm/topology.h | 2 +-
 arch/x86/pci/amd_bus.c          | 2 +-
 arch/x86/pci/common.c           | 8 +++-----
 arch/x86/pci/i386.c             | 4 ++++
 4 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 892b119dba6..f44b49abca4 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -200,7 +200,7 @@ static inline void arch_fix_phys_package_id(int num, u32 slot)
 }
 
 struct pci_bus;
-void set_pci_bus_resources_arch_default(struct pci_bus *b);
+void x86_pci_root_bus_res_quirks(struct pci_bus *b);
 
 #ifdef CONFIG_SMP
 #define mc_capable()	(cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 9bb09823b36..e121ee050f7 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -94,7 +94,7 @@ struct pci_root_info {
 static int pci_root_num;
 static struct pci_root_info pci_root_info[PCI_ROOT_NR];
 
-void set_pci_bus_resources_arch_default(struct pci_bus *b)
+void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 {
 	int i;
 	int j;
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index f80ece51305..2202b6257b8 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -142,10 +142,6 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 	}
 }
 
-void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b)
-{
-}
-
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -155,7 +151,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b)
 {
 	struct pci_dev *dev;
 
-	set_pci_bus_resources_arch_default(b);
+	/* root bus? */
+	if (!b->parent)
+		x86_pci_root_bus_res_quirks(b);
 	pci_read_bridge_bases(b);
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index f1817f71e00..a85bef20a3b 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -238,6 +238,10 @@ void __init pcibios_resource_survey(void)
  */
 fs_initcall(pcibios_assign_resources);
 
+void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
+{
+}
+
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
-- 
GitLab


From 681bf597215c62bd6f5ae1180a58a38997122b5b Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 13 Apr 2009 18:28:54 -0700
Subject: [PATCH 0698/1421] PCI: cleanup debug output resources

Remove outputs for 0 sized resources and indicate prefetchability.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/setup-bus.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8d9da9d30a6..a00f85471b6 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -536,11 +536,13 @@ static void pci_bus_dump_res(struct pci_bus *bus)
 
         for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
                 struct resource *res = bus->resource[i];
-                if (!res)
+                if (!res || !res->end)
                         continue;
 
 		dev_printk(KERN_DEBUG, &bus->dev, "resource %d %s %pR\n", i,
-			   (res->flags & IORESOURCE_IO) ? "io: " : "mem:", res);
+			   (res->flags & IORESOURCE_IO) ? "io: " :
+			    ((res->flags & IORESOURCE_PREFETCH)? "pref mem":"mem:"),
+			   res);
         }
 }
 
-- 
GitLab


From cffb2fafb726c898fec1c5ae33717741f94fda83 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 10 Apr 2009 15:17:50 -0700
Subject: [PATCH 0699/1421] docbooks: add/fix PCI kernel-doc

Add drivers/pci/*.c source files to DocBook/kernel-api.tmpl
and update those pci/*.c source files that need kernel-doc fixes.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 Documentation/DocBook/kernel-api.tmpl |  6 +++++-
 drivers/pci/access.c                  |  4 ++--
 drivers/pci/htirq.c                   |  1 +
 drivers/pci/pci-sysfs.c               | 12 ++++++++----
 drivers/pci/slot.c                    |  4 ++--
 5 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index d6ac5d61820..44b3def961a 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -190,16 +190,20 @@ X!Ekernel/module.c
 !Edrivers/pci/pci.c
 !Edrivers/pci/pci-driver.c
 !Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
 !Edrivers/pci/search.c
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
 !Edrivers/pci/rom.c
 !Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 64dd7df90e6..0f370651268 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -87,8 +87,8 @@ EXPORT_SYMBOL(pci_read_vpd);
  * pci_write_vpd - Write entry to Vital Product Data
  * @dev:	pci device struct
  * @pos:	offset in vpd space
- * @count:	number of bytes to read
- * @val:	value to write
+ * @count:	number of bytes to write
+ * @buf:	buffer containing write data
  *
  */
 ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index bf7d6ce9bbb..6808d8333ec 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -158,6 +158,7 @@ int ht_create_irq(struct pci_dev *dev, int idx)
 
 /**
  * ht_destroy_irq - destroy an irq created with ht_create_irq
+ * @irq: irq to be destroyed
  *
  * This reverses ht_create_irq removing the specified irq from
  * existence.  The irq should be free before this happens.
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a7eb1b46a5a..85ebd02a64a 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -492,6 +492,7 @@ write_vpd_attr(struct kobject *kobj, struct bin_attribute *bin_attr,
 /**
  * pci_read_legacy_io - read byte(s) from legacy I/O port space
  * @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
  * @buf: buffer to store results
  * @off: offset into legacy I/O port space
  * @count: number of bytes to read
@@ -517,6 +518,7 @@ pci_read_legacy_io(struct kobject *kobj, struct bin_attribute *bin_attr,
 /**
  * pci_write_legacy_io - write byte(s) to legacy I/O port space
  * @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
  * @buf: buffer containing value to be written
  * @off: offset into legacy I/O port space
  * @count: number of bytes to write
@@ -733,9 +735,9 @@ pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
 
 /**
  * pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: dev to cleanup
  *
- * If we created resource files for @dev, remove them from sysfs and
+ * If we created resource files for @pdev, remove them from sysfs and
  * free their resources.
  */
 static void
@@ -793,9 +795,9 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
 
 /**
  * pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * @pdev: dev in question
  *
- * Walk the resources in @dev creating files for each resource available.
+ * Walk the resources in @pdev creating files for each resource available.
  */
 static int pci_create_resource_files(struct pci_dev *pdev)
 {
@@ -829,6 +831,7 @@ void __weak pci_remove_resource_files(struct pci_dev *dev) { return; }
 /**
  * pci_write_rom - used to enable access to the PCI ROM display
  * @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
  * @buf: user input
  * @off: file offset
  * @count: number of byte in input
@@ -852,6 +855,7 @@ pci_write_rom(struct kobject *kobj, struct bin_attribute *bin_attr,
 /**
  * pci_read_rom - read a PCI ROM
  * @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
  * @buf: where to put the data we read from the ROM
  * @off: file offset
  * @count: number of bytes to read
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 21189447e54..fe95ce20bcb 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -264,8 +264,8 @@ EXPORT_SYMBOL_GPL(pci_create_slot);
 
 /**
  * pci_renumber_slot - update %struct pci_slot -> number
- * @slot - %struct pci_slot to update
- * @slot_nr - new number for slot
+ * @slot: &struct pci_slot to update
+ * @slot_nr: new number for slot
  *
  * The primary purpose of this interface is to allow callers who earlier
  * created a placeholder slot in pci_create_slot() by passing a -1 as
-- 
GitLab


From 3a6b42cadc112b01daf0525e5fcd90bb333a5bb3 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Thu, 16 Apr 2009 18:35:37 -0500
Subject: [PATCH 0700/1421] eCryptfs: Larger buffer for encrypted symlink
 targets

When using filename encryption with eCryptfs, the value of the symlink
in the lower filesystem is encrypted and stored as a Tag 70 packet.
This results in a longer symlink target than if the target value wasn't
encrypted.

Users were reporting these messages in their syslog:

[ 45.653441] ecryptfs_parse_tag_70_packet: max_packet_size is [56]; real
packet size is [51]
[ 45.653444] ecryptfs_decode_and_decrypt_filename: Could not parse tag
70 packet from filename; copying through filename as-is

This was due to bufsiz, one the arguments in readlink(), being used to
when allocating the buffer passed to the lower inode's readlink().
That symlink target may be very large, but when decoded and decrypted,
could end up being smaller than bufsize.

To fix this, the buffer passed to the lower inode's readlink() will
always be PATH_MAX in size when filename encryption is enabled.  Any
necessary truncation occurs after the decoding and decrypting.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/inode.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index d8325263ba6..93bc0f8174a 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -640,8 +640,9 @@ static int
 ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 {
 	char *lower_buf;
+	size_t lower_bufsiz;
 	struct dentry *lower_dentry;
-	struct ecryptfs_crypt_stat *crypt_stat;
+	struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
 	char *plaintext_name;
 	size_t plaintext_name_size;
 	mm_segment_t old_fs;
@@ -652,12 +653,21 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 		rc = -EINVAL;
 		goto out;
 	}
-	crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
+	mount_crypt_stat = &ecryptfs_superblock_to_private(
+						dentry->d_sb)->mount_crypt_stat;
+	/*
+	 * If the lower filename is encrypted, it will result in a significantly
+	 * longer name.  If needed, truncate the name after decode and decrypt.
+	 */
+	if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+		lower_bufsiz = PATH_MAX;
+	else
+		lower_bufsiz = bufsiz;
 	/* Released in this function */
-	lower_buf = kmalloc(bufsiz, GFP_KERNEL);
+	lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
 	if (lower_buf == NULL) {
 		printk(KERN_ERR "%s: Out of memory whilst attempting to "
-		       "kmalloc [%d] bytes\n", __func__, bufsiz);
+		       "kmalloc [%d] bytes\n", __func__, lower_bufsiz);
 		rc = -ENOMEM;
 		goto out;
 	}
@@ -665,7 +675,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 	set_fs(get_ds());
 	rc = lower_dentry->d_inode->i_op->readlink(lower_dentry,
 						   (char __user *)lower_buf,
-						   bufsiz);
+						   lower_bufsiz);
 	set_fs(old_fs);
 	if (rc >= 0) {
 		rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
@@ -678,7 +688,9 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 				rc);
 			goto out_free_lower_buf;
 		}
-		rc = copy_to_user(buf, plaintext_name, plaintext_name_size);
+		/* Check for bufsiz <= 0 done in sys_readlinkat() */
+		rc = copy_to_user(buf, plaintext_name,
+				  min((unsigned) bufsiz, plaintext_name_size));
 		if (rc)
 			rc = -EFAULT;
 		else
-- 
GitLab


From b10ceb5530df7ee6e81f92910589a34dd3e5690b Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 20 Apr 2009 18:35:40 -0700
Subject: [PATCH 0701/1421] x86/PCI: don't bother with root quirks if _CRS is
 used

It will be overwriten later if _CRS is used, so don't bother to set it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/amd_bus.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index e121ee050f7..f893d6a6e80 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,6 +100,10 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	int j;
 	struct pci_root_info *info;
 
+	/* don't go for it if _CRS is used */
+	if (pci_probe & PCI_USE__CRS)
+		return;
+
 	/* if only one root bus, don't need to anything */
 	if (pci_root_num < 2)
 		return;
-- 
GitLab


From 1b6b8ce2ac372ea1f2065b89228ede105eb68dc5 Mon Sep 17 00:00:00 2001
From: Yu Zhao <yu.zhao@intel.com>
Date: Thu, 9 Apr 2009 14:57:39 +0800
Subject: [PATCH 0702/1421] PCI: only save/restore existent registers in the
 PCIe capability

PCIe 1.1 base neither requires the endpoint to implement the entire
PCIe capability structure nor specifies default values of registers
that are not implemented by the device. So we only save and restore
registers that must be implemented by different device types if the
device PCIe capability version is 1.

PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires
all registers in the PCIe capability to be either implemented or
hardwired to 0. Their PCIe capability version is 2.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pci.c        | 70 ++++++++++++++++++++++++++++++++--------
 include/linux/pci_regs.h |  1 +
 2 files changed, 57 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 16fd0d4c316..34bf0fdf504 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -681,11 +681,34 @@ EXPORT_SYMBOL(pci_choose_state);
 
 #define PCI_EXP_SAVE_REGS	7
 
+#define pcie_cap_has_devctl(type, flags)	1
+#define pcie_cap_has_lnkctl(type, flags)		\
+		((flags & PCI_EXP_FLAGS_VERS) > 1 ||	\
+		 (type == PCI_EXP_TYPE_ROOT_PORT ||	\
+		  type == PCI_EXP_TYPE_ENDPOINT ||	\
+		  type == PCI_EXP_TYPE_LEG_END))
+#define pcie_cap_has_sltctl(type, flags)		\
+		((flags & PCI_EXP_FLAGS_VERS) > 1 ||	\
+		 ((type == PCI_EXP_TYPE_ROOT_PORT) ||	\
+		  (type == PCI_EXP_TYPE_DOWNSTREAM &&	\
+		   (flags & PCI_EXP_FLAGS_SLOT))))
+#define pcie_cap_has_rtctl(type, flags)			\
+		((flags & PCI_EXP_FLAGS_VERS) > 1 ||	\
+		 (type == PCI_EXP_TYPE_ROOT_PORT ||	\
+		  type == PCI_EXP_TYPE_RC_EC))
+#define pcie_cap_has_devctl2(type, flags)		\
+		((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_lnkctl2(type, flags)		\
+		((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_sltctl2(type, flags)		\
+		((flags & PCI_EXP_FLAGS_VERS) > 1)
+
 static int pci_save_pcie_state(struct pci_dev *dev)
 {
 	int pos, i = 0;
 	struct pci_cap_saved_state *save_state;
 	u16 *cap;
+	u16 flags;
 
 	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
 	if (pos <= 0)
@@ -698,13 +721,22 @@ static int pci_save_pcie_state(struct pci_dev *dev)
 	}
 	cap = (u16 *)&save_state->data[0];
 
-	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
-	pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
-	pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
-	pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
-	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
-	pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
-	pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
+	pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+	if (pcie_cap_has_devctl(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+	if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+	if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+	if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+	if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+	if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+	if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+		pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
 
 	return 0;
 }
@@ -714,6 +746,7 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
 	int i = 0, pos;
 	struct pci_cap_saved_state *save_state;
 	u16 *cap;
+	u16 flags;
 
 	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
 	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
@@ -721,13 +754,22 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
 		return;
 	cap = (u16 *)&save_state->data[0];
 
-	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
-	pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
-	pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
-	pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
-	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
-	pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
-	pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
+	pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+	if (pcie_cap_has_devctl(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+	if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+	if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+	if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+	if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+	if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+	if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+		pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
 }
 
 
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e4d08c1b2e0..616bf8b3c8b 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -376,6 +376,7 @@
 #define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
 #define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
 #define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
+#define  PCI_EXP_TYPE_RC_EC	0x10	/* Root Complex Event Collector */
 #define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
 #define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
 #define PCI_EXP_DEVCAP		4	/* Device capabilities */
-- 
GitLab


From a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 21 Apr 2009 00:50:11 -0400
Subject: [PATCH 0703/1421] ACPI: idle: mark_tsc_unstable() at init-time, not
 run-time

The c2 and c3 idle handlers check tsc_halts_in_c()
after every time they return from idle.  Um, when?:-)

Move this check to init-time to remove the unnecessary
run-time overhead, and also to have the check complete before
the first entry into the idle handler.

ff69f2bba67bd45514923aaedbf40fe351787c59
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
replaced the hard-coded use of the PM-timer inside idle,
with ktime_get_readl(), which possibly uses the TSC --
so it is now especially prudent to detect a broken TSC
before entering idle.

http://bugzilla.kernel.org/show_bug.cgi?id=13087

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6fe121434ff..9d1f01ee65d 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -581,6 +581,11 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+		/* TSC could halt in idle, so notify users */
+		if (tsc_halts_in_c(cx->type))
+			mark_tsc_unstable("TSC halts in idle");;
+#endif
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
@@ -871,11 +876,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	kt2 = ktime_get_real();
 	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-	/* TSC could halt in idle, so notify users */
-	if (tsc_halts_in_c(cx->type))
-		mark_tsc_unstable("TSC halts in idle");;
-#endif
 	sleep_ticks = us_to_pm_timer_ticks(idle_time);
 
 	/* Tell the scheduler how much we idled: */
@@ -989,11 +989,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		spin_unlock(&c3_lock);
 	}
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-	/* TSC could halt in idle, so notify users */
-	if (tsc_halts_in_c(ACPI_STATE_C3))
-		mark_tsc_unstable("TSC halts in idle");
-#endif
 	sleep_ticks = us_to_pm_timer_ticks(idle_time);
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
-- 
GitLab


From 64f68416e794d59a42ddffdf1c5b7f026a4f23d5 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 23 Apr 2009 09:23:32 +1000
Subject: [PATCH 0704/1421] m68knommu: update the default config for the
 ColdFire 5407C3 board

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5407c3_defconfig | 179 +++++++++++++----------
 1 file changed, 98 insertions(+), 81 deletions(-)

diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
index 1118936d20e..97b6cde2fc1 100644
--- a/arch/m68knommu/configs/m5407c3_defconfig
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Wed May  7 10:25:16 2008
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 09:21:40 2009
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -16,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -45,44 +55,43 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,7 +105,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -149,45 +158,36 @@ CONFIG_RAMAUTOBIT=y
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
 #
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -228,6 +228,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -237,7 +238,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -248,14 +251,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -274,6 +271,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -334,6 +332,11 @@ CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -349,6 +352,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -362,7 +366,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -372,10 +376,15 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -385,8 +394,10 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -409,39 +420,22 @@ CONFIG_SLHC=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -454,7 +448,6 @@ CONFIG_INPUT=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -473,19 +466,23 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -496,6 +493,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -514,19 +512,17 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -534,12 +530,14 @@ CONFIG_DAB=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -547,6 +545,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -569,10 +572,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -582,13 +582,20 @@ CONFIG_SYSFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -611,11 +618,17 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -624,18 +637,22 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 92614610774072ea68131f16e024ee8fc15be9be Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Wed, 22 Apr 2009 19:28:15 -0400
Subject: [PATCH 0705/1421] ACPI: delete obsolete "bus master activity" proc
 field

Linux-2.6.29 deleted the legacy ACPI idle handler, leaving
the CPU_IDLE handler, which does not track bus master activity.

So delete the unused bm_activity field -- it is confusing to
print an always zero value.

This patch could break programs that parse
/proc/acpi/processor/*/power, since it deletes this
line from that file:

bus master activity:     00000000

http://bugzilla.kernel.org/show_bug.cgi?id=13145
is not fixed by this patch, but provoked this patch.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c | 4 +---
 include/acpi/processor.h      | 1 -
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 9d1f01ee65d..eed3b458eba 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -662,11 +662,9 @@ static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
 
 	seq_printf(seq, "active state:            C%zd\n"
 		   "max_cstate:              C%d\n"
-		   "bus master activity:     %08x\n"
 		   "maximum allowed latency: %d usec\n",
 		   pr->power.state ? pr->power.state - pr->power.states : 0,
-		   max_cstate, (unsigned)pr->power.bm_activity,
-		   pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
+		   max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
 
 	seq_puts(seq, "states:\n");
 
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index b09c4fde972..4927c063347 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -84,7 +84,6 @@ struct acpi_processor_power {
 	struct acpi_processor_cx *state;
 	unsigned long bm_check_timestamp;
 	u32 default_state;
-	u32 bm_activity;
 	int count;
 	struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
 	int timer_broadcast_on_state;
-- 
GitLab


From e84a26ce178345498a7eca0590852bcc36f1092f Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 22 Apr 2009 20:52:25 -0400
Subject: [PATCH 0706/1421] ext4: Make the extent validity check more paranoid

Instead of just checking that the extent block number is greater or
equal than s_first_data_block, make sure it it is not pointing into
the block group descriptors, since that is clearly wrong.  This helps
prevent filesystem from getting very badly corrupted in case an extent
block is corrupted.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/extents.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 6132353dcf6..c28ffe25950 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -326,11 +326,14 @@ ext4_ext_max_entries(struct inode *inode, int depth)
 
 static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
 {
-	ext4_fsblk_t block = ext_pblock(ext);
+	ext4_fsblk_t block = ext_pblock(ext), valid_block;
 	int len = ext4_ext_get_actual_len(ext);
 	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
-	if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
-			((block + len) > ext4_blocks_count(es))))
+
+	valid_block = le32_to_cpu(es->s_first_data_block) +
+		EXT4_SB(inode->i_sb)->s_gdb_count;
+	if (unlikely(block <= valid_block ||
+		     ((block + len) > ext4_blocks_count(es))))
 		return 0;
 	else
 		return 1;
@@ -339,10 +342,13 @@ static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
 static int ext4_valid_extent_idx(struct inode *inode,
 				struct ext4_extent_idx *ext_idx)
 {
-	ext4_fsblk_t block = idx_pblock(ext_idx);
+	ext4_fsblk_t block = idx_pblock(ext_idx), valid_block;
 	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
-	if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
-			(block >= ext4_blocks_count(es))))
+
+	valid_block = le32_to_cpu(es->s_first_data_block) +
+		EXT4_SB(inode->i_sb)->s_gdb_count;
+	if (unlikely(block <= valid_block ||
+		     (block >= ext4_blocks_count(es))))
 		return 0;
 	else
 		return 1;
-- 
GitLab


From b5451f7b2694b04d9f912f6cf09db1729f291996 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 22 Apr 2009 21:00:36 -0400
Subject: [PATCH 0707/1421] ext4: Fix potential inode allocation soft lockup in
 Orlov allocator

If the Orlov allocator is having trouble finding an appropriate block
group, the fallback code could loop forever, causing a soft lockup
warning in find_group_orlov():

BUG: soft lockup - CPU#0 stuck for 61s! [cp:11728]
     ...
Pid: 11728, comm: cp Not tainted (2.6.30-rc1-dirty #77) Lenovo
EIP: 0060:[<c021650e>] EFLAGS: 00000246 CPU: 0
EIP is at ext4_get_group_desc+0x54/0x9d
    ...
Call Trace:
 [<c0218021>] find_group_orlov+0x2ee/0x334
 [<c0120a5f>] ? sched_clock+0x8/0xb
 [<c02188e3>] ext4_new_inode+0x2cf/0xb1a

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ialloc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index cbce5aa6b92..f18e0a08a6b 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -585,6 +585,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent,
 fallback:
 	ngroups = sbi->s_groups_count;
 	avefreei = freei / ngroups;
+fallback_retry:
 	parent_group = EXT4_I(parent)->i_block_group;
 	for (i = 0; i < ngroups; i++) {
 		grp = (parent_group + i) % ngroups;
@@ -602,7 +603,7 @@ fallback:
 		 * filesystems the above test can fail to find any blockgroups
 		 */
 		avefreei = 0;
-		goto fallback;
+		goto fallback_retry;
 	}
 
 	return -1;
-- 
GitLab


From c8088112fd96ad8b0f0bcd2f168fe6a17bf3cb41 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 22 Apr 2009 19:48:53 -0600
Subject: [PATCH 0708/1421] OMAP2xxx clock: pre-initialize struct clks early

Commit 3f0a820c4c0b4670fb5f164baa5582e23c2ef118 breaks OMAP2xxx boot
during initial propagate_rate() on osc_ck and sys_ck.  Fix by
pre-initializing all struct clks before running any other clock init
code.  Incorporates review comments from Russell King
<rmk+kernel@arm.linux.org.uk>.

Resolves

<1>Unable to handle kernel NULL pointer dereference at virtual address 00000000
<1>pgd = c0004000
<1>[00000000] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.29-omap1 #37)
PC is at propagate_rate+0x10/0x60
LR is at omap2_clk_init+0x30/0x218
...

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 6 +++---
 arch/arm/plat-omap/clock.c      | 7 +++++++
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 1e839c5a28c..984fb86349b 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -720,14 +720,14 @@ int __init omap2_clk_init(void)
 
 	clk_init(&omap2_clk_functions);
 
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		clk_init_one(c->lk.clk);
+
 	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
 	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
 	propagate_rate(&sys_ck);
 
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_init_one(c->lk.clk);
-
 	cpu_mask = 0;
 	if (cpu_is_omap2420())
 		cpu_mask |= CK_242X;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2e0614552ac..29efc279287 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -239,6 +239,13 @@ void recalculate_root_clocks(void)
 	}
 }
 
+/**
+ * clk_init_one - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
 void clk_init_one(struct clk *clk)
 {
 	INIT_LIST_HEAD(&clk->children);
-- 
GitLab


From a1992db55d80297544a65160ddb98afba45f7759 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 23 Apr 2009 08:22:23 +0200
Subject: [PATCH 0709/1421] ASoC: remove non-existing referece to
 CONFIG_SND_SOC_CODEC_WM8991

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 030d2454725..f2653803ede 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_SND_SOC_WM8900)	+= snd-soc-wm8900.o
 obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
 obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
 obj-$(CONFIG_SND_SOC_WM8990)	+= snd-soc-wm8990.o
-obj-$(CONFIG_SND_SOC_WM8991)	+= snd-soc-wm8991.o
 obj-$(CONFIG_SND_SOC_WM9705)	+= snd-soc-wm9705.o
 obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
-- 
GitLab


From 7315613f87f4aa0a52f60814f4ee3802e0bb1ec5 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 23 Apr 2009 08:24:48 +0200
Subject: [PATCH 0710/1421] ALSA: hda - Fix init verbs of AD1884A mobile model

The current ad1884a-mobile model has a problem that the speaker output
doesn't work sometimes after boot or power-saving on some HP laptops.
It seems that the verbs accessing to the non-functional widgets cause
this problem.

This patch simplifies the init verbs for mobile model not to touch
unnecessary setups so that it avoids the speaker-mute problem.

Reference: Novell bnc#495668
	https://bugzilla.novell.com/show_bug.cgi?id=495668

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_analog.c | 45 +++++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 9bcd8ab5a27..84cc49ca914 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3817,6 +3817,49 @@ static struct hda_verb ad1884a_laptop_verbs[] = {
 	{ } /* end */
 };
 
+static struct hda_verb ad1884a_mobile_verbs[] = {
+	/* DACs; unmute as default */
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	/* Port-A (HP) mixer - route only from analog mixer */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-A pin */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Port-A (HP) pin - always unmuted */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Port-B (mic jack) pin */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+	/* Port-C (int mic) pin */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+	/* Port-F (int speaker) mixer - route only from analog mixer */
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-F pin */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Analog mixer; mute as default */
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+	/* Analog Mix output amp */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* capture sources */
+	/* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* unsolicited event for pin-sense */
+	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	{ } /* end */
+};
+
 /*
  * Thinkpad X300
  * 0x11 - HP
@@ -3988,7 +4031,7 @@ static int patch_ad1884a(struct hda_codec *codec)
 		break;
 	case AD1884A_MOBILE:
 		spec->mixers[0] = ad1884a_mobile_mixers;
-		spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
+		spec->init_verbs[0] = ad1884a_mobile_verbs;
 		spec->multiout.dig_out_nid = 0;
 		codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
 		codec->patch_ops.init = ad1884a_hp_init;
-- 
GitLab


From b48ccb095a0c9257241261ec2bd1cbb1bdabc48b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 23 Apr 2009 09:36:52 +0200
Subject: [PATCH 0711/1421] locking: clarify kernel-taint warning message

Andi Kleen reported this message triggering on non-lockdep kernels:

   Disabling lockdep due to kernel taint

Clarify the message to say 'lock debugging' - debug_locks_off()
turns off all things lock debugging, not just lockdep.

[ Impact: change kernel warning message text ]

Reported-by: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/panic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/panic.c b/kernel/panic.c
index 934fb377f4b..3dcaa166135 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -221,7 +221,7 @@ void add_taint(unsigned flag)
 	 * post-warning case.
 	 */
 	if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off())
-		printk(KERN_WARNING "Disabling lockdep due to kernel taint\n");
+		printk(KERN_WARNING "Disabling lock debugging due to kernel taint\n");
 
 	set_bit(flag, &tainted_mask);
 }
-- 
GitLab


From 4c31e92b97b6d7e7b19ee5e54a22571ffdebb305 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 22 Apr 2009 14:19:27 -0700
Subject: [PATCH 0712/1421] x86: check boundary in setup_node_bootmem()

Commit dc09855 ("x86/uv: fix init of memory-less nodes") causes a
two sockets system (where node-1 doesn't have RAM installed) to crash.

That commit makes node_possible include cpu nodes that do not have memory.
So check boundary in setup_node_bootmem().

[ Impact: fix boot crash on RAM-less NUMA node system ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
LKML-Reference: <49EF89DF.9090404@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/numa_64.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index d73aaa89237..2d05a12029d 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -188,6 +188,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
 	int nid;
 
+	if (!end)
+		return;
+
 	start = roundup(start, ZONE_ALIGN);
 
 	printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
-- 
GitLab


From 952043ac12a117d8e94bddd9088338d7ad20ca7d Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 23 Apr 2009 08:48:15 +0100
Subject: [PATCH 0713/1421] bitops: Add __ffs64 bitop

Finds the first set bit in a 64 bit word. This is required in order
to fix a bug in GFS2, but I think it should be a generic function
in case of future users.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Willy Tarreau <w@1wt.eu>
---
 include/linux/bitops.h | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 61829139795..c05a29cb9bb 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -112,6 +112,25 @@ static inline unsigned fls_long(unsigned long l)
 	return fls64(l);
 }
 
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+	if (((u32)word) == 0UL)
+		return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+	return __ffs((unsigned long)word);
+}
+
 #ifdef __KERNEL__
 #ifdef CONFIG_GENERIC_FIND_FIRST_BIT
 
-- 
GitLab


From d8bd504ab800c8e9aadb983914a33e7166320bec Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 23 Apr 2009 08:54:02 +0100
Subject: [PATCH 0714/1421] GFS2: Fix bug in block allocation

The new bitfit algorithm was counting from the wrong end of
64 bit words in the bitfield. This fixes it by using __ffs64
instead of fls64

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/rgrp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index f03d024038e..c9786a46cdf 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -212,8 +212,7 @@ static u32 gfs2_bitfit(const u8 *buf, const unsigned int len,
 	if (tmp == 0)
 		return BFITNOENT;
 	ptr--;
-	bit = fls64(tmp);
-	bit--;		/* fls64 always adds one to the bit count */
+	bit = __ffs64(tmp);
 	bit /= 2;	/* two bits per entry in the bitmap */
 	return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit;
 }
-- 
GitLab


From d9ba7615bfd8bb06f79c853f9dfff9e93a837941 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 23 Apr 2009 08:59:41 +0100
Subject: [PATCH 0715/1421] GFS2: Ensure that the inode goal block settings are
 updated

GFS2 has a goal block associated with each inode indicating the
search start position for future block allocations (in fact there
are two, but thats for backward compatibility with GFS1 as they
are set to identical locations in GFS2).

In some circumstances, depending on the ordering of updates to
the inode it was possible for the goal block settings to not
be updated on disk. This patch ensures that the goal block will
always get updated, thus reducing the potential for searching
the same (already allocated) blocks again when looking for free
space during block allocation.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/rgrp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index c9786a46cdf..565038243fa 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1444,10 +1444,12 @@ static struct gfs2_rgrpd *rgblk_free(struct gfs2_sbd *sdp, u64 bstart,
 u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	struct buffer_head *dibh;
 	struct gfs2_alloc *al = ip->i_alloc;
 	struct gfs2_rgrpd *rgd = al->al_rgd;
 	u32 goal, blk;
 	u64 block;
+	int error;
 
 	if (rgrp_contains_block(rgd, ip->i_goal))
 		goal = ip->i_goal - rgd->rd_data0;
@@ -1460,7 +1462,13 @@ u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
 	rgd->rd_last_alloc = blk;
 	block = rgd->rd_data0 + blk;
 	ip->i_goal = block;
-
+	error = gfs2_meta_inode_buffer(ip, &dibh);
+	if (error == 0) {
+		struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+		di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal);
+		brelse(dibh);
+	}
 	gfs2_assert_withdraw(sdp, rgd->rd_free >= *n);
 	rgd->rd_free -= *n;
 
-- 
GitLab


From 3bd5f3ef290627efa3c219fa21a82eea90bc4cb0 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 23 Apr 2009 13:58:06 +0200
Subject: [PATCH 0716/1421] [S390] ipl: fix compile breakage

Fix this for !CONFIG_SMP:

arch/s390/kernel/ipl.c: In function 'stop_run':
arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor'

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 6f3711a0eaa..b8bf4b14006 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -23,6 +23,7 @@
 #include <asm/ebcdic.h>
 #include <asm/reset.h>
 #include <asm/sclp.h>
+#include <asm/sigp.h>
 #include <asm/checksum.h>
 
 #define IPL_PARM_BLOCK_VERSION 0
-- 
GitLab


From b1ad171efa089ae26aba750d747d8149a4f860d5 Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Thu, 23 Apr 2009 13:58:07 +0200
Subject: [PATCH 0717/1421] [S390] appldata: avoid deadlock with appldata_mem

The appldata_ops callbacks are called with a spin_lock held. But the
appldata_mem callback then calls all_vm_events(), which calls
get_online_cpus(), which might sleep. This possible deadlock is fixed
by using a mutex instead of a spin_lock.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/appldata/appldata_base.c | 32 +++++++++++++++---------------
 arch/s390/appldata/appldata_mem.c  |  2 +-
 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index aeb3cff95f6..1dfc7100c7e 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -98,7 +98,7 @@ static DECLARE_WORK(appldata_work, appldata_work_fn);
 /*
  * Ops list
  */
-static DEFINE_SPINLOCK(appldata_ops_lock);
+static DEFINE_MUTEX(appldata_ops_mutex);
 static LIST_HEAD(appldata_ops_list);
 
 
@@ -129,14 +129,14 @@ static void appldata_work_fn(struct work_struct *work)
 
 	i = 0;
 	get_online_cpus();
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
 		if (ops->active == 1) {
 			ops->callback(ops->data);
 		}
 	}
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 	put_online_cpus();
 }
 
@@ -338,7 +338,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 	struct list_head *lh;
 
 	found = 0;
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_for_each(lh, &appldata_ops_list) {
 		tmp_ops = list_entry(lh, struct appldata_ops, list);
 		if (&tmp_ops->ctl_table[2] == ctl) {
@@ -346,15 +346,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		}
 	}
 	if (!found) {
-		spin_unlock(&appldata_ops_lock);
+		mutex_unlock(&appldata_ops_mutex);
 		return -ENODEV;
 	}
 	ops = ctl->data;
 	if (!try_module_get(ops->owner)) {	// protect this function
-		spin_unlock(&appldata_ops_lock);
+		mutex_unlock(&appldata_ops_mutex);
 		return -ENODEV;
 	}
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 
 	if (!*lenp || *ppos) {
 		*lenp = 0;
@@ -378,11 +378,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		return -EFAULT;
 	}
 
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	if ((buf[0] == '1') && (ops->active == 0)) {
 		// protect work queue callback
 		if (!try_module_get(ops->owner)) {
-			spin_unlock(&appldata_ops_lock);
+			mutex_unlock(&appldata_ops_mutex);
 			module_put(ops->owner);
 			return -ENODEV;
 		}
@@ -407,7 +407,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 			       "failed with rc=%d\n", ops->name, rc);
 		module_put(ops->owner);
 	}
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 out:
 	*lenp = len;
 	*ppos += len;
@@ -433,9 +433,9 @@ int appldata_register_ops(struct appldata_ops *ops)
 	if (!ops->ctl_table)
 		return -ENOMEM;
 
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_add(&ops->list, &appldata_ops_list);
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 
 	ops->ctl_table[0].procname = appldata_proc_name;
 	ops->ctl_table[0].maxlen   = 0;
@@ -452,9 +452,9 @@ int appldata_register_ops(struct appldata_ops *ops)
 		goto out;
 	return 0;
 out:
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_del(&ops->list);
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 	kfree(ops->ctl_table);
 	return -ENOMEM;
 }
@@ -466,9 +466,9 @@ out:
  */
 void appldata_unregister_ops(struct appldata_ops *ops)
 {
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_del(&ops->list);
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 	unregister_sysctl_table(ops->sysctl_header);
 	kfree(ops->ctl_table);
 }
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 3ed56b7d1b2..4188cbe63a5 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -78,7 +78,7 @@ static void appldata_get_mem_data(void *data)
 {
 	/*
 	 * don't put large structures on the stack, we are
-	 * serialized through the appldata_ops_lock and can use static
+	 * serialized through the appldata_ops_mutex and can use static
 	 */
 	static struct sysinfo val;
 	unsigned long ev[NR_VM_EVENT_ITEMS];
-- 
GitLab


From e1c805309d19c69d4ebeac38724076fa86feacdf Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 23 Apr 2009 13:58:08 +0200
Subject: [PATCH 0718/1421] [S390] /proc/stat idle field for idle cpus

The cpu idle field in the output of /proc/stat is too small for cpus
that have been idle for more than a tick. Add the architecture hook
arch_idle_time that allows to add the not accounted idle time of a
sleeping cpu without waking the cpu.

The s390 implementation of arch_idle_time uses the already existing
s390_idle_data per_cpu variable to find the sleep time of a neighboring
idle cpu.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/cputime.h |  4 ++++
 arch/s390/kernel/vtime.c        | 16 ++++++++++++++++
 fs/proc/stat.c                  |  5 +++++
 3 files changed, 25 insertions(+)

diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 95b0f7db3c6..941384fbd39 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -174,4 +174,8 @@ cputime64_to_clock_t(cputime64_t cputime)
        return __div(cputime, 4096000000ULL / USER_HZ);
 }
 
+cputime64_t s390_get_idle_time(int cpu);
+
+#define arch_idle_time(cpu) s390_get_idle_time(cpu)
+
 #endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 38ea92ff04f..c87f59bd824 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -240,6 +240,22 @@ void vtime_stop_cpu(void)
 	}
 }
 
+cputime64_t s390_get_idle_time(int cpu)
+{
+	struct s390_idle_data *idle;
+	unsigned long long now, idle_time, idle_enter;
+
+	idle = &per_cpu(s390_idle, cpu);
+	spin_lock(&idle->lock);
+	now = get_clock();
+	idle_time = 0;
+	idle_enter = idle->idle_enter;
+	if (idle_enter != 0ULL && idle_enter < now)
+		idle_time = now - idle_enter;
+	spin_unlock(&idle->lock);
+	return idle_time;
+}
+
 /*
  * Sorted add to a list. List is linear searched until first bigger
  * element is found.
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index f75efa22df5..81e4eb60972 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -18,6 +18,9 @@
 #ifndef arch_irq_stat
 #define arch_irq_stat() 0
 #endif
+#ifndef arch_idle_time
+#define arch_idle_time(cpu) 0
+#endif
 
 static int show_stat(struct seq_file *p, void *v)
 {
@@ -40,6 +43,7 @@ static int show_stat(struct seq_file *p, void *v)
 		nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
 		system = cputime64_add(system, kstat_cpu(i).cpustat.system);
 		idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
+		idle = cputime64_add(idle, arch_idle_time(i));
 		iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
 		irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
 		softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
@@ -69,6 +73,7 @@ static int show_stat(struct seq_file *p, void *v)
 		nice = kstat_cpu(i).cpustat.nice;
 		system = kstat_cpu(i).cpustat.system;
 		idle = kstat_cpu(i).cpustat.idle;
+		idle = cputime64_add(idle, arch_idle_time(i));
 		iowait = kstat_cpu(i).cpustat.iowait;
 		irq = kstat_cpu(i).cpustat.irq;
 		softirq = kstat_cpu(i).cpustat.softirq;
-- 
GitLab


From 4d7a3cdfb4c9aa1e2ce61f3b16b24eb6acf6726d Mon Sep 17 00:00:00 2001
From: Frank Munzert <munzert@de.ibm.com>
Date: Thu, 23 Apr 2009 13:58:09 +0200
Subject: [PATCH 0719/1421] [S390] Use tape_generic_offline directly.

tape_3590_offline and tape_34xx_offline are removed and tape_generic_offline
is called directly instead.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/char/tape.h      | 2 +-
 drivers/s390/char/tape_34xx.c | 8 +-------
 drivers/s390/char/tape_3590.c | 8 +-------
 drivers/s390/char/tape_core.c | 5 ++++-
 4 files changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index c07809c8016..5469e099597 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -285,7 +285,7 @@ extern int tape_mtop(struct tape_device *, int, int);
 extern void tape_state_set(struct tape_device *, enum tape_state);
 
 extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
-extern int tape_generic_offline(struct tape_device *device);
+extern int tape_generic_offline(struct ccw_device *);
 
 /* Externals from tape_devmap.c */
 extern int tape_generic_probe(struct ccw_device *);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 807ded5eb04..5f8e8ef43dd 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1294,12 +1294,6 @@ tape_34xx_online(struct ccw_device *cdev)
 	);
 }
 
-static int
-tape_34xx_offline(struct ccw_device *cdev)
-{
-	return tape_generic_offline(cdev->dev.driver_data);
-}
-
 static struct ccw_driver tape_34xx_driver = {
 	.name = "tape_34xx",
 	.owner = THIS_MODULE,
@@ -1307,7 +1301,7 @@ static struct ccw_driver tape_34xx_driver = {
 	.probe = tape_generic_probe,
 	.remove = tape_generic_remove,
 	.set_online = tape_34xx_online,
-	.set_offline = tape_34xx_offline,
+	.set_offline = tape_generic_offline,
 };
 
 static int
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index fc1d9129414..823b05bd0dd 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1707,19 +1707,13 @@ tape_3590_online(struct ccw_device *cdev)
 				   &tape_discipline_3590);
 }
 
-static int
-tape_3590_offline(struct ccw_device *cdev)
-{
-	return tape_generic_offline(cdev->dev.driver_data);
-}
-
 static struct ccw_driver tape_3590_driver = {
 	.name = "tape_3590",
 	.owner = THIS_MODULE,
 	.ids = tape_3590_ids,
 	.probe = tape_generic_probe,
 	.remove = tape_generic_remove,
-	.set_offline = tape_3590_offline,
+	.set_offline = tape_generic_offline,
 	.set_online = tape_3590_online,
 };
 
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 08c09d3503c..8a109f3b69c 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -387,8 +387,11 @@ tape_cleanup_device(struct tape_device *device)
  * Manual offline is only allowed while the drive is not in use.
  */
 int
-tape_generic_offline(struct tape_device *device)
+tape_generic_offline(struct ccw_device *cdev)
 {
+	struct tape_device *device;
+
+	device = cdev->dev.driver_data;
 	if (!device) {
 		return -ENODEV;
 	}
-- 
GitLab


From 75ee034addc9ac3f6a38a9e6b30e9b54be15d4e5 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 23 Apr 2009 13:58:10 +0200
Subject: [PATCH 0720/1421] [S390] omit frame pointers on s390 when possible

Always omit frame pointers on s390. They aren't too useful for the
kernel since we have already the kernel stack backchain which allows
us to walk the kernel stack.
So eleminate the extra code for frame pointers. Only allow the extra
code for the function tracer since the gcc compile options -pg and
-fomit-frame-pointer are incompatible.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 lib/Kconfig.debug | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index c6e854f215f..812c28207ba 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -440,7 +440,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
+	select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -620,7 +620,7 @@ config ARCH_WANT_FRAME_POINTERS
 config FRAME_POINTER
 	bool "Compile the kernel with frame pointers"
 	depends on DEBUG_KERNEL && \
-		(CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+		(CRIS || M68K || M68KNOMMU || FRV || UML || \
 		 AVR32 || SUPERH || BLACKFIN || MN10300) || \
 		ARCH_WANT_FRAME_POINTERS
 	default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
@@ -809,13 +809,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER if !PPC
+	select FRAME_POINTER if !PPC && !S390
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS && !PPC
+	select FRAME_POINTER if !MIPS && !PPC && !S390
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
-- 
GitLab


From e655dc8873b2390d92888095af6adad822a8b386 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 23 Apr 2009 13:58:11 +0200
Subject: [PATCH 0721/1421] [S390] update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/defconfig | 63 +++++++++++++++++++++++++++++++++++----------
 1 file changed, 50 insertions(+), 13 deletions(-)

diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 31e809c7779..d401d56c255 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Wed Feb 11 10:07:16 2009
+# Linux kernel version: 2.6.30-rc3
+# Thu Apr 23 09:29:52 2009
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -22,6 +22,7 @@ CONFIG_NO_DMA=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_PGSTE=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_S390=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -37,6 +38,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
@@ -77,21 +79,24 @@ CONFIG_IPC_NS=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -99,10 +104,12 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
@@ -111,6 +118,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +133,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -211,11 +219,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # I/O subsystem configuration
 #
-CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
 CONFIG_CHSC_SCH=m
 
@@ -247,12 +256,12 @@ CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
+CONFIG_SECCOMP=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -374,6 +383,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -438,7 +448,6 @@ CONFIG_CAN_BCM=m
 CONFIG_CAN_VCAN=m
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -537,6 +546,7 @@ CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
 CONFIG_SCSI_DH=m
@@ -544,6 +554,10 @@ CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
 CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_AUTODETECT=y
@@ -564,6 +578,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -667,6 +682,7 @@ CONFIG_S390_VMUR=m
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_STAGING is not set
 
 #
@@ -676,6 +692,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -700,6 +717,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -744,6 +766,8 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_EXOFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -758,7 +782,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -806,6 +829,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -830,7 +854,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -840,7 +863,9 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -850,14 +875,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 
 #
 # Security options
@@ -882,10 +910,12 @@ CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -954,6 +984,7 @@ CONFIG_CRYPTO_SEED=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -969,6 +1000,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 # CONFIG_CRYPTO_DES_S390 is not set
 # CONFIG_CRYPTO_AES_S390 is not set
 CONFIG_S390_PRNG=m
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -982,9 +1014,14 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=m
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_NLATTR=y
 CONFIG_HAVE_KVM=y
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
-- 
GitLab


From 323d23aeac4918c7a540b597a26fa7a67645593a Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 23 Apr 2009 08:51:22 -0500
Subject: [PATCH 0722/1421] Revert "powerpc: Add support for early tlbilx
 opcode"

This reverts commit e9965577406a2148ade97b5e0ce7c448b4ba4ef6.  Our HW
guys were able to fix this so it never sees the light of day.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu.h        |  6 ------
 arch/powerpc/include/asm/ppc-opcode.h | 11 +----------
 arch/powerpc/kernel/cputable.c        |  2 +-
 arch/powerpc/mm/tlb_nohash_low.S      | 14 +-------------
 4 files changed, 3 insertions(+), 30 deletions(-)

diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 86d2366ab6a..cbf15438709 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,12 +52,6 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
-/* This indicates that the processor uses the wrong opcode for tlbilx
- * instructions.  During the ISA 2.06 development the opcode for tlbilx
- * changed and some early implementations used to old opcode
- */
-#define MMU_FTR_TLBILX_EARLY_OPCODE	ASM_CONST(0x00400000)
-
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index ef4da37f3c1..640ccbbc097 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -44,7 +44,6 @@
 #define PPC_INST_STSWI			0x7c0005aa
 #define PPC_INST_STSWX			0x7c00052a
 #define PPC_INST_TLBILX			0x7c000024
-#define PPC_INST_TLBILX_EARLY		0x7c000626
 #define PPC_INST_WAIT			0x7c00007c
 
 /* macros to insert fields into opcodes */
@@ -64,18 +63,10 @@
 #define PPC_RFDI		stringify_in_c(.long PPC_INST_RFDI)
 #define PPC_RFMCI		stringify_in_c(.long PPC_INST_RFMCI)
 #define PPC_TLBILX(t, a, b)	stringify_in_c(.long PPC_INST_TLBILX | \
-					__PPC_T_TLB(t) | \
-					__PPC_RA(a) | __PPC_RB(b))
+					__PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
 #define PPC_TLBILX_ALL(a, b)	PPC_TLBILX(0, a, b)
 #define PPC_TLBILX_PID(a, b)	PPC_TLBILX(1, a, b)
 #define PPC_TLBILX_VA(a, b)	PPC_TLBILX(3, a, b)
-
-#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \
-						__PPC_T_TLB(t) | \
-						__PPC_RA(a) | __PPC_RB(b))
-#define PPC_TLBILX_ALL_EARLY(a, b)	PPC_TLBILX_EARLY(0, a, b)
-#define PPC_TLBILX_PID_EARLY(a, b)	PPC_TLBILX_EARLY(1, a, b)
-#define PPC_TLBILX_VA_EARLY(a, b)	PPC_TLBILX_EARLY(3, a, b)
 #define PPC_WAIT(w)		stringify_in_c(.long PPC_INST_WAIT | \
 					__PPC_WC(w))
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 57db50f4028..cd1b687544f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_E500MC,
 		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
 		.mmu_features		= MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
-			MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE,
+			MMU_FTR_USE_TLBILX,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 45fed369834..788b87c36f7 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -138,11 +138,7 @@ BEGIN_MMU_FTR_SECTION
 	andi.	r3,r3,MMUCSR0_TLBFI@l
 	bne	1b
 MMU_FTR_SECTION_ELSE
-  BEGIN_MMU_FTR_SECTION_NESTED(96)
-	PPC_TLBILX_ALL(0,r3)
-  MMU_FTR_SECTION_ELSE_NESTED(96)
-	PPC_TLBILX_ALL_EARLY(0,r3)
-  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
+	PPC_TLBILX_ALL(0,0)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
@@ -155,11 +151,7 @@ BEGIN_MMU_FTR_SECTION
 	wrteei	0
 	mfspr	r4,SPRN_MAS6	/* save MAS6 */
 	mtspr	SPRN_MAS6,r3
-  BEGIN_MMU_FTR_SECTION_NESTED(96)
 	PPC_TLBILX_PID(0,0)
-  MMU_FTR_SECTION_ELSE_NESTED(96)
-	PPC_TLBILX_PID_EARLY(0,0)
-  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 	mtspr	SPRN_MAS6,r4	/* restore MAS6 */
 	wrtee	r10
 MMU_FTR_SECTION_ELSE
@@ -193,11 +185,7 @@ BEGIN_MMU_FTR_SECTION
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 MMU_FTR_SECTION_ELSE
-  BEGIN_MMU_FTR_SECTION_NESTED(96)
 	PPC_TLBILX_VA(0,r3)
-  MMU_FTR_SECTION_ELSE_NESTED(96)
-	PPC_TLBILX_VA_EARLY(0,r3)
-  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
-- 
GitLab


From b62c31ae401c6df25c61b206681a6e904ef97169 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 23 Apr 2009 22:56:11 +1000
Subject: [PATCH 0723/1421] powerpc: fix for long standing bug noticed by gcc
 4.4.0

Previous gcc versions didn't notice this because one of the preceding
#ifs always evaluated to true.

gcc 4.4.0 produced this error:

arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/mm/tlb_nohash_low.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 788b87c36f7..3037911279b 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -191,6 +191,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	isync
 1:	wrtee	r10
 	blr
-#elif
+#else
 #error Unsupported processor type !
 #endif
-- 
GitLab


From f2ec24fd42d52a52829070b5e31d9a17d145df30 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 10:36:54 +0200
Subject: [PATCH 0724/1421] microblaze: Remove unneded per cpu SYSCALL_SAVE
 variable

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/entry.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index 7f57e42ee46..1019d88b812 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -29,7 +29,6 @@ DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
 DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
 DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
-DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */
 # endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
-- 
GitLab


From 51eb6dc9ca40d086c102bb868ba7f29f33a30f6f Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 10:41:45 +0200
Subject: [PATCH 0725/1421] microblaze: Remove while(1) loop from show_regs
 function

I removed it because of show_regs can't break die function.
If process/kernel failed, die (do_exit) function resolve it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/process.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 436f26ccbfa..bdc8b2c6c57 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -37,8 +37,6 @@ void show_regs(struct pt_regs *regs)
 				regs->r29, regs->r30, regs->r31, regs->pc);
 	printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
 				regs->msr, regs->ear, regs->esr, regs->fsr);
-	while (1)
-		;
 }
 
 void (*pm_idle)(void);
-- 
GitLab


From ceb8944b3a3dd3ec4094a476a44802cc32c4fc02 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 10:46:37 +0200
Subject: [PATCH 0726/1421] microblaze: Remove uncache shadow condition

Uncached shadow feature is not supported in current
kernel code that's why I removed it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/cache.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h
index c4c64b43c07..c209c47509d 100644
--- a/arch/microblaze/include/asm/cache.h
+++ b/arch/microblaze/include/asm/cache.h
@@ -37,9 +37,4 @@ void _invalidate_dcache(unsigned int addr);
 #define __disable_dcache()		_disable_dcache()
 #define __invalidate_dcache(addr)	_invalidate_dcache(addr)
 
-/* FIXME - I don't think this is right */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
-#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE)
-#endif
-
 #endif /* _ASM_MICROBLAZE_CACHE_H */
-- 
GitLab


From ac3efab50621bd6d01e5b40f3134dc7824788390 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 10:58:47 +0200
Subject: [PATCH 0727/1421] microblaze: Rename kernel_mode to pt_mode in
 pt_regs

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/processor.h | 2 +-
 arch/microblaze/include/asm/ptrace.h    | 4 ++--
 arch/microblaze/kernel/asm-offsets.c    | 2 +-
 arch/microblaze/kernel/process.c        | 4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index d8e15434ba2..4bed76d0a6c 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -62,7 +62,7 @@ static inline void start_thread(struct pt_regs *regs,
 {
 	regs->pc = pc;
 	regs->r1 = usp;
-	regs->kernel_mode = 0;
+	regs->pt_mode = 0;
 }
 
 /* Free all resources held by a thread. */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index f1f03486428..55015bce5e4 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -52,10 +52,10 @@ struct pt_regs {
 	microblaze_reg_t ear;
 	microblaze_reg_t esr;
 	microblaze_reg_t fsr;
-	int kernel_mode;
+	int pt_mode;
 };
 
-#define kernel_mode(regs)		((regs)->kernel_mode)
+#define kernel_mode(regs)		((regs)->pt_mode)
 #define user_mode(regs)			(!kernel_mode(regs))
 
 #define instruction_pointer(regs)	((regs)->pc)
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index 38e1a2e8ad0..aabd9e9423a 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -57,7 +57,7 @@ int main(int argc, char *argv[])
 	DEFINE(PT_R29, offsetof(struct pt_regs, r29));
 	DEFINE(PT_R30, offsetof(struct pt_regs, r30));
 	DEFINE(PT_R31, offsetof(struct pt_regs, r31));
-	DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode));
+	DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
 	BLANK();
 
 	/* Magic offsets for PTRACE PEEK/POKE etc */
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index bdc8b2c6c57..40cc1480810 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -18,7 +18,7 @@
 
 void show_regs(struct pt_regs *regs)
 {
-	printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode);
+	printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode);
 	printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
 				regs->r1, regs->r2, regs->r3, regs->r4);
 	printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
@@ -169,7 +169,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.r6 = (unsigned long)arg;
 	local_save_flags(regs.msr);
 	regs.pc = (unsigned long)kernel_thread_helper;
-	regs.kernel_mode = 1;
+	regs.pt_mode = 1;
 
 	ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 			&regs, 0, NULL, NULL);
-- 
GitLab


From 2eba318e0db1114726e69660d6b9e1bd59b10ba1 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 11:05:26 +0200
Subject: [PATCH 0728/1421] microblaze: Move task_pt_regs up

This change is important for easier merge with Microblaze MMU code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/processor.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 4bed76d0a6c..cea42a36d16 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -26,6 +26,9 @@ extern const struct seq_operations cpuinfo_op;
 
 # endif /* __ASSEMBLY__ */
 
+#define task_pt_regs(tsk) \
+		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
 /*
  * User space process size: memory size
  *
@@ -84,9 +87,6 @@ extern unsigned long get_wchan(struct task_struct *p);
  */
 extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 
-# define task_pt_regs(tsk) \
-		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
-
 # define KSTK_EIP(tsk)	(0)
 # define KSTK_ESP(tsk)	(0)
 
-- 
GitLab


From bf7e9da4e70a9d4bf9dc5829ff854398e0e4b7f7 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 11:10:07 +0200
Subject: [PATCH 0729/1421] microblaze: Remove sparse error in traps.c

CHECK   arch/microblaze/kernel/traps.c
arch/microblaze/kernel/traps.c:37:47: warning: Using plain integer as NULL pointer
CC      arch/microblaze/kernel/traps.o

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index fbdc533c61e..293ef486013 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -34,7 +34,7 @@ static int kstack_depth_to_print = 24;
 
 static int __init kstack_setup(char *s)
 {
-	kstack_depth_to_print = strict_strtoul(s, 0, 0);
+	kstack_depth_to_print = strict_strtoul(s, 0, NULL);
 
 	return 1;
 }
-- 
GitLab


From ce0b755f7dda4f1c06b89f7e903667f538dadd3c Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 11:11:22 +0200
Subject: [PATCH 0730/1421] microblaze: Add missing declaration for die and
 _exception func

This change remove sparse errors.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/exceptions.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 4cdd2159f47..24ca540e77c 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -61,6 +61,9 @@
 asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 							int fsr, int addr);
 
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
 #if defined(CONFIG_XMON)
 extern void xmon(struct pt_regs *regs);
 extern int xmon_bpt(struct pt_regs *regs);
-- 
GitLab


From df4f3eb7c318e34899e9499bc5c9295690f7a106 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 11:29:13 +0200
Subject: [PATCH 0731/1421] microblaze: Add missing preadv and pwritev syscalls

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/unistd.h   | 4 +++-
 arch/microblaze/kernel/syscall_table.S | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index d9d3903fde3..b5e2f5fa5c5 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -378,8 +378,10 @@
 #define __NR_sendmsg		360 /* new */
 #define __NR_recvmsg		361 /* new */
 #define __NR_accept04		362 /* new */
+#define __NR_preadv		363 /* new */
+#define __NR_pwritev		364 /* new */
 
-#define __NR_syscalls		363
+#define __NR_syscalls		365
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 529b0dbf4fe..3bb42ec924c 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -363,3 +363,5 @@ ENTRY(sys_call_table)
 	.long sys_sendmsg		/* 360 */
 	.long sys_recvmsg
 	.long sys_ni_syscall
+	.long sys_ni_syscall
+	.long sys_ni_syscall
-- 
GitLab


From e1c4bd0897b6d03eff4b32197d6ab017f83fc836 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 11:30:16 +0200
Subject: [PATCH 0732/1421] microblaze: Move start_thread to process.c

This change is due to upcomming MMU merge

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/processor.h | 13 +++----------
 arch/microblaze/kernel/process.c        |  9 +++++++++
 2 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index cea42a36d16..89aa3956929 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -29,6 +29,9 @@ extern const struct seq_operations cpuinfo_op;
 #define task_pt_regs(tsk) \
 		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
 
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
 /*
  * User space process size: memory size
  *
@@ -58,16 +61,6 @@ struct task_struct;
 struct thread_struct { };
 # define INIT_THREAD	{ }
 
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs *regs,
-				unsigned long pc,
-				unsigned long usp)
-{
-	regs->pc = pc;
-	regs->r1 = usp;
-	regs->pt_mode = 0;
-}
-
 /* Free all resources held by a thread. */
 static inline void release_thread(struct task_struct *dead_task)
 {
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 40cc1480810..dd15de9cde3 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -182,3 +182,12 @@ unsigned long get_wchan(struct task_struct *p)
 /* TBD (used by procfs) */
 	return 0;
 }
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+	set_fs(USER_DS);
+	regs->pc = pc;
+	regs->r1 = usp;
+	regs->pt_mode = 0;
+}
-- 
GitLab


From 6714fcc34e1bcf247fe542ebdea36b699ff8e2b8 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Apr 2009 11:32:21 +0200
Subject: [PATCH 0733/1421] microblaze: Remove redundant variable

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/process.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index dd15de9cde3..07d4fa339ed 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -161,7 +161,6 @@ static void kernel_thread_helper(int (*fn)(void *), void *arg)
 int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 {
 	struct pt_regs regs;
-	int ret;
 
 	memset(&regs, 0, sizeof(regs));
 	/* store them in non-volatile registers */
@@ -171,10 +170,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.pc = (unsigned long)kernel_thread_helper;
 	regs.pt_mode = 1;
 
-	ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 			&regs, 0, NULL, NULL);
-
-	return ret;
 }
 
 unsigned long get_wchan(struct task_struct *p)
-- 
GitLab


From 04e3a553e0cbed369e5649c472ac317b6c45215d Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 20 Apr 2009 09:56:24 +0200
Subject: [PATCH 0734/1421] microblaze: Correspond CONFIG...PCMP in
 Makefile/Kconfig

Makefile contained different cpu config flag
than is in Kconfig.auto in platform folder

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 0dcbb983297..ee302f9f588 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -26,7 +26,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
 endif
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
-- 
GitLab


From 6e60c14810d8da792e418fdcb2110b4185d1b9a2 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 16 Apr 2009 22:49:17 +0200
Subject: [PATCH 0735/1421] microblaze: iowrite upon timeout

retries reaches -1, so the iowrite occurrs upon timeout.

Acked-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/early_printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
index 62cc78993f4..4b0f0fdb9ca 100644
--- a/arch/microblaze/kernel/early_printk.c
+++ b/arch/microblaze/kernel/early_printk.c
@@ -36,7 +36,7 @@ static void early_printk_putc(char c)
 
 	unsigned retries = 10000;
 	/* read status bit - 0x8 offset */
-	while (retries-- && (in_be32(base_addr + 8) & (1 << 3)))
+	while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
 		;
 
 	/* Only attempt the iowrite if we didn't timeout */
-- 
GitLab


From 79533fd4cb7c261694d3b7d5bdde78836bc35b49 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Apr 2009 14:04:39 +0200
Subject: [PATCH 0736/1421] microblaze: Fix USR1/2 pvr printing message

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/mb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
index 3b6212bdc8d..4dcfccdbc36 100644
--- a/arch/microblaze/kernel/cpu/mb.c
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -115,8 +115,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			cpuinfo.hw_debug ? "yes" : "no");
 
 	count += seq_printf(m,
-			"PVR-USR1:\t%x\n"
-			"PVR-USR2:\t%x\n",
+			"PVR-USR1:\t%02x\n"
+			"PVR-USR2:\t%08x\n",
 			cpuinfo.pvr_user1,
 			cpuinfo.pvr_user2);
 
-- 
GitLab


From fbeda67782689bf80109512b16ac47264a282d01 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Apr 2009 14:06:08 +0200
Subject: [PATCH 0737/1421] microblaze: Do not use PVR configuration for broken
 MB version

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 9 +++++++--
 arch/microblaze/kernel/cpu/cpuinfo.c          | 2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index cf7424a6bb8..153f57c57b6 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -30,6 +30,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 	int temp; /* for saving temp value */
 	get_pvr(&pvr);
 
+	CI(ver_code, VERSION);
+	if (!ci->ver_code) {
+		printk(KERN_ERR "ERROR: MB has broken PVR regs "
+						"-> use DTS setting\n");
+		return;
+	}
+
 	temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\
 		PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
 	if (ci->use_instr != temp)
@@ -60,8 +67,6 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 
 	CI(mmu, USE_MMU);
 
-	CI(ver_code, VERSION);
-
 	CI(use_icache, USE_ICACHE);
 	CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
 	CI(icache_write, ICACHE_ALLOW_WR);
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 4a740dfcf6d..a10bea119b9 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -71,7 +71,7 @@ void __init setup_cpuinfo(void)
 			__func__);
 		set_cpuinfo_static(&cpuinfo, cpu);
 		break;
-/* FIXME I found weird behavior with MB 7.00.a/b
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
  * please do not use FULL PVR with MMU */
 	case 1:
 		printk(KERN_INFO "%s: Using full CPU PVR support\n",
-- 
GitLab


From 6dfb79aa114ac69032f3931235ffc90799e9630b Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Apr 2009 14:07:00 +0200
Subject: [PATCH 0738/1421] microblaze: Do not check use_dcache

It is not necessary to check cpuinfo.use_dcache because
this checking is done in function which call that functions

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cache.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index be9fecca4f9..af866a45012 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -100,7 +100,6 @@ void _enable_dcache(void)
 
 void _disable_dcache(void)
 {
-	if (cpuinfo.use_dcache) {
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 		__asm__ __volatile__ ("					\
 				msrclr	r0, %0;				\
@@ -119,12 +118,10 @@ void _disable_dcache(void)
 				: "i" (MSR_DCE)			\
 				: "memory", "r12");
 #endif
-	}
 }
 
 void _invalidate_dcache(unsigned int addr)
 {
-	if (cpuinfo.use_dcache)
 		__asm__ __volatile__ ("					\
 				wdc	%0, r0"				\
 				:					\
-- 
GitLab


From 2921e2bd679949a7892d308b414e6a3b3c705260 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Apr 2009 14:08:47 +0200
Subject: [PATCH 0739/1421] microblaze: Add STATE_SAVE_ARG_SPACE for noMMU
 kernel too

For noMMU kernel this change nothing bring but this change
helps with MMU synchronization.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/entry.h     |  3 +++
 arch/microblaze/include/asm/processor.h |  2 ++
 arch/microblaze/kernel/signal.c         | 14 ++++++++++----
 3 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index 1019d88b812..e4c3aef884d 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -31,4 +31,7 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
 # endif /* __ASSEMBLY__ */
 
+/* noMMU hasn't any space for args */
+# define STATE_SAVE_ARG_SPACE	(0)
+
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 89aa3956929..9329029d261 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -15,6 +15,8 @@
 #include <asm/setup.h>
 #include <asm/registers.h>
 #include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/current.h>
 
 # ifndef __ASSEMBLY__
 /* from kernel/cpu/mb.c */
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 3889cf45fa7..40d36931e36 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -178,7 +178,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
 
 asmlinkage int sys_sigreturn(struct pt_regs *regs)
 {
-	struct sigframe *frame = (struct sigframe *)regs->r1;
+	struct sigframe *frame =
+			(struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
 	sigset_t set;
 	int rval;
 
@@ -209,7 +211,9 @@ badframe:
 
 asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 {
-	struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1;
+	struct rt_sigframe *frame =
+			(struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
 	sigset_t set;
 	stack_t st;
 	int rval;
@@ -336,7 +340,8 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame;
+	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
 	/* Signal handler args: */
 	regs->r5 = signal; /* Arg 0: signum */
 	regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
@@ -414,7 +419,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame;
+	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
 	/* Signal handler args: */
 	regs->r5 = signal; /* arg 0: signum */
 	regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
-- 
GitLab


From 993ce24078eac1442078741cd204584b63de0881 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Apr 2009 14:12:18 +0200
Subject: [PATCH 0740/1421] microblaze: Use CFLAGS_KERNEL instead of CFLAGS

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Makefile | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index ee302f9f588..aaadfa701da 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -32,15 +32,13 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
 # The various CONFIG_XILINX cpu features options are integers 0/1/2...
 # rather than bools y/n
-CFLAGS += $(CPUFLAGS-1)
-CFLAGS += $(CPUFLAGS-2)
 
 # r31 holds current when in kernel mode
-CFLAGS += -ffixed-r31
+CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
-LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
 
 head-y		:= arch/microblaze/kernel/head.o
 libs-y		+= arch/microblaze/lib/ $(LIBGCC)
-- 
GitLab


From f57f2fe2a39338c47b67fbd564a9d3b7587bcbee Mon Sep 17 00:00:00 2001
From: Coly Li <coly.li@suse.de>
Date: Thu, 23 Apr 2009 03:05:31 +0800
Subject: [PATCH 0741/1421] microblaze: add parameter to microblaze_read()

This patch modifies parameter of microblaze_read() from 'void' to 'struct
clocksource *cs', which fixes compile warning for incompatible parameter type.

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/timer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 05a497eefd7..bdfa2f9f0c8 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -176,7 +176,7 @@ static __init void microblaze_clockevent_init(void)
 	clockevents_register_device(&clockevent_microblaze_timer);
 }
 
-static cycle_t microblaze_read(void)
+static cycle_t microblaze_read(struct clocksource *cs)
 {
 	/* reading actual value of timer 1 */
 	return (cycle_t) (in_be32(TIMER_BASE + TCR1));
-- 
GitLab


From a396e32ef0f3b98700abb9a6da3530c945e55908 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 23 Apr 2009 15:43:45 +0100
Subject: [PATCH 0742/1421] ASoC: s3c-i2s-v2 needs to declare a license for
 modular builds

It relies on EXPORT_SYMBOL_GPL() symbols.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/s3c-i2s-v2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 689ffcd17e1..ab680aac3fc 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -636,5 +636,6 @@ int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
 
 	return snd_soc_register_dai(dai);
 }
-
 EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+
+MODULE_LICENSE("GPL");
-- 
GitLab


From 9232fcc99948e39d5be04fc1c1025bd4f7998739 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 8 Apr 2009 14:49:38 -0700
Subject: [PATCH 0743/1421] davinci: add default Kconfig, add HAVE_IDE

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/Kconfig                       |    1 +
 arch/arm/configs/davinci_all_defconfig | 1784 ++++++++++++++++++++++++
 2 files changed, 1785 insertions(+)
 create mode 100644 arch/arm/configs/davinci_all_defconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e02b893fb90..bb57f35e768 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -585,6 +585,7 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select ZONE_DMA
+	select HAVE_IDE
 	help
 	  Support for TI's DaVinci platform.
 
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
new file mode 100644
index 00000000000..eb2738b5be5
--- /dev/null
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -0,0 +1,1784 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From e653034e66ec406f37427f588115badc6fc6af64 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Fri, 20 Mar 2009 17:37:21 -0700
Subject: [PATCH 0744/1421] davinci: add runtime CPU detection support

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/id.c                   | 29 ++++++++++--
 arch/arm/mach-davinci/include/mach/cputype.h | 49 ++++++++++++++++++++
 2 files changed, 75 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-davinci/include/mach/cputype.h

diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
index bf067d60491..379f2baf66d 100644
--- a/arch/arm/mach-davinci/id.c
+++ b/arch/arm/mach-davinci/id.c
@@ -17,6 +17,8 @@
 
 #define JTAG_ID_BASE		0x01c40028
 
+static unsigned int davinci_revision;
+
 struct davinci_id {
 	u8	variant;	/* JTAG ID bits 31:28 */
 	u16	part_no;	/* JTAG ID bits 27:12 */
@@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
 		.manufacturer = 0x017,
 		.type	      = 0x64460000,
 	},
+	{
+		/* DM646X */
+		.part_no      = 0xb770,
+		.variant      = 0x0,
+		.manufacturer = 0x017,
+		.type         = 0x64670000,
+	},
+	{
+		/* DM355 */
+		.part_no	= 0xb73b,
+		.variant	= 0x0,
+		.manufacturer	= 0x00f,
+		.type		= 0x03550000,
+	},
 };
 
 /*
@@ -63,6 +79,12 @@ static u8 __init davinci_get_variant(void)
 	return variant;
 }
 
+unsigned int davinci_rev(void)
+{
+	return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
 void __init davinci_check_revision(void)
 {
 	int i;
@@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
 	/* First check only the major version in a safe way */
 	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
 		if (part_no == (davinci_ids[i].part_no)) {
-			system_rev = davinci_ids[i].type;
+			davinci_revision = davinci_ids[i].type;
 			break;
 		}
 	}
@@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
 	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
 		if (part_no == davinci_ids[i].part_no &&
 		    variant == davinci_ids[i].variant) {
-			system_rev = davinci_ids[i].type;
+			davinci_revision = davinci_ids[i].type;
 			break;
 		}
 	}
 
-	printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+	       davinci_rev(), variant);
 }
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
new file mode 100644
index 00000000000..27cfb1b3a66
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -0,0 +1,49 @@
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type.  In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id)			\
+static inline int is_davinci_dm ##type(void)	        \
+{							\
+	return (davinci_rev() == (id)) ? 1 : 0;	        \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif
-- 
GitLab


From c5b736d093217890245a33e9a98fe92d6f3529bf Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Fri, 20 Mar 2009 17:29:01 -0700
Subject: [PATCH 0745/1421] davinci: major rework of clock, PLL, PSC
 infrastructure

This is a significant rework of the low-level clock, PLL and Power
Sleep Controller (PSC) implementation for the DaVinci family.  The
primary goal is to have better modeling if the hardware clocks and
features with the aim of DVFS functionality.

Highlights:
- model PLLs and all PLL-derived clocks
- model parent/child relationships of PLLs and clocks
- convert to new clkdev layer
- view clock frequency and refcount via /proc/davinci_clocks

Special thanks to significant contributions and testing by David
Brownell.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/Kconfig                            |   1 +
 arch/arm/mach-davinci/Kconfig               |  12 +
 arch/arm/mach-davinci/board-evm.c           |   2 -
 arch/arm/mach-davinci/clock.c               | 385 ++++++++++++--------
 arch/arm/mach-davinci/clock.h               |  87 ++++-
 arch/arm/mach-davinci/include/mach/clkdev.h |  13 +
 arch/arm/mach-davinci/include/mach/clock.h  |   1 -
 arch/arm/mach-davinci/include/mach/psc.h    |  53 ++-
 arch/arm/mach-davinci/io.c                  |   1 -
 arch/arm/mach-davinci/psc.c                 |  81 ++--
 10 files changed, 402 insertions(+), 234 deletions(-)
 create mode 100644 arch/arm/mach-davinci/include/mach/clkdev.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bb57f35e768..cfd99649ad8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -586,6 +586,7 @@ config ARCH_DAVINCI
 	select HAVE_CLK
 	select ZONE_DMA
 	select HAVE_IDE
+	select COMMON_CLKDEV
 	help
 	  Support for TI's DaVinci platform.
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index bac988e7a4c..af886734c73 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -18,6 +18,18 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DaVinci EVM
 
+config DAVINCI_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_DAVINCI
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 0b97a528902..1b745c39d89 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -406,8 +406,6 @@ davinci_evm_map_io(void)
 
 static __init void davinci_evm_init(void)
 {
-	davinci_psc_init();
-
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
 #if defined(CONFIG_MTD_PHYSMAP) || \
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index abb92b7eca0..f0baaa15a57 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -1,7 +1,8 @@
 /*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
  *
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
@@ -21,98 +23,50 @@
 #include <mach/hardware.h>
 
 #include <mach/psc.h>
+#include <mach/cputype.h>
 #include "clock.h"
 
-/* PLL/Reset register offsets */
-#define PLLM		0x110
-
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clockfw_lock);
 
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000;	/* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
 {
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
+	return (clk->flags & PSC_DSP)
+		? DAVINCI_GPSC_DSPDOMAIN
+		: DAVINCI_GPSC_ARMDOMAIN;
 }
-EXPORT_SYMBOL(clk_get);
 
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
 {
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk->flags & ALWAYS_ENABLED)
-		return 0;
-
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
-	return 0;
+	if (clk->parent)
+		__clk_enable(clk->parent);
+	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+		davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
 {
-	if (clk->usecount)
+	if (WARN_ON(clk->usecount == 0))
 		return;
-
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+		davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+	if (clk->parent)
+		__clk_disable(clk->parent);
 }
 
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
-	int ret = 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	if (clk->usecount++ == 0) {
-		spin_lock_irqsave(&clockfw_lock, flags);
-		ret = __clk_enable(clk);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
@@ -123,11 +77,9 @@ void clk_disable(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return;
 
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		spin_lock_irqsave(&clockfw_lock, flags);
-		__clk_disable(clk);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
@@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	return *(clk->rate);
+	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	return *(clk->rate);
+	return clk->rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
@@ -164,10 +116,23 @@ int clk_register(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	if (WARN(clk->parent && !clk->parent->rate,
+			"CLK: %s parent %s has no rate!\n",
+			clk->name, clk->parent->name))
+		return -EINVAL;
+
 	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
+	list_add_tail(&clk->node, &clocks);
 	mutex_unlock(&clocks_mutex);
 
+	/* If rate is already set, use it */
+	if (clk->rate)
+		return 0;
+
+	/* Otherwise, default to parent rate */
+	if (clk->parent)
+		clk->rate = clk->parent->rate;
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_register);
@@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-static struct clk davinci_clks[] = {
-	{
-		.name = "ARMCLK",
-		.rate = &armrate,
-		.lpsc = -1,
-		.flags = ALWAYS_ENABLED,
-	},
-	{
-		.name = "UART",
-		.rate = &fixedrate,
-		.lpsc = DAVINCI_LPSC_UART0,
-	},
-	{
-		.name = "EMACCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
-	},
-	{
-		.name = "I2CCLK",
-		.rate = &fixedrate,
-		.lpsc = DAVINCI_LPSC_I2C,
-	},
-	{
-		.name = "IDECLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_ATA,
-	},
-	{
-		.name = "McBSPCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_McBSP,
-	},
-	{
-		.name = "MMCSDCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_MMC_SD,
-	},
-	{
-		.name = "SPICLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_SPI,
-	},
-	{
-		.name = "gpio",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_GPIO,
-	},
-	{
-		.name = "usb",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_USB,
-	},
-	{
-		.name = "AEMIFCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_AEMIF,
-		.usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+
+	spin_lock_irq(&clockfw_lock);
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->usecount > 0)
+			continue;
+		if (!(ck->flags & CLK_PSC))
+			continue;
+
+		/* ignore if in Disabled or SwRstDisable states */
+		if (!davinci_psc_is_clk_active(ck->lpsc))
+			continue;
+
+		pr_info("Clocks: disable unused %s\n", ck->name);
+		davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
 	}
-};
+	spin_unlock_irq(&clockfw_lock);
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
 
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
 {
-	struct clk *clkp;
-	int count = 0;
-	u32 pll_mult;
-
-	pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
-	commonrate = ((pll_mult + 1) * 27000000) / 6;
-	armrate = ((pll_mult + 1) * 27000000) / 2;
-
-	for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
-	     count++, clkp++) {
-		clk_register(clkp);
-
-		/* Turn on clocks that have been enabled in the
-		 * table above */
-		if (clkp->usecount)
-			clk_enable(clkp);
+	u32 v, plldiv;
+	struct pll_data *pll;
+
+	/* If this is the PLL base clock, no more calculations needed */
+	if (clk->pll_data)
+		return;
+
+	if (WARN_ON(!clk->parent))
+		return;
+
+	clk->rate = clk->parent->rate;
+
+	/* Otherwise, the parent must be a PLL */
+	if (WARN_ON(!clk->parent->pll_data))
+		return;
+
+	pll = clk->parent->pll_data;
+
+	/* If pre-PLL, source clock is before the multiplier and divider(s) */
+	if (clk->flags & PRE_PLL)
+		clk->rate = pll->input_rate;
+
+	if (!clk->div_reg)
+		return;
+
+	v = __raw_readl(pll->base + clk->div_reg);
+	if (v & PLLDIV_EN) {
+		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+		if (plldiv)
+			clk->rate /= plldiv;
+	}
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+	u8 bypass;
+	struct pll_data *pll = clk->pll_data;
+
+	pll->base = IO_ADDRESS(pll->phys_base);
+	ctrl = __raw_readl(pll->base + PLLCTL);
+	clk->rate = pll->input_rate = clk->parent->rate;
+
+	if (ctrl & PLLCTL_PLLEN) {
+		bypass = 0;
+		mult = __raw_readl(pll->base + PLLM);
+		mult = (mult & PLLM_PLLM_MASK) + 1;
+	} else
+		bypass = 1;
+
+	if (pll->flags & PLL_HAS_PREDIV) {
+		prediv = __raw_readl(pll->base + PREDIV);
+		if (prediv & PLLDIV_EN)
+			prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+		else
+			prediv = 1;
+	}
+
+	/* pre-divider is fixed, but (some?) chips won't report that */
+	if (cpu_is_davinci_dm355() && pll->num == 1)
+		prediv = 8;
+
+	if (pll->flags & PLL_HAS_POSTDIV) {
+		postdiv = __raw_readl(pll->base + POSTDIV);
+		if (postdiv & PLLDIV_EN)
+			postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+		else
+			postdiv = 1;
+	}
+
+	if (!bypass) {
+		clk->rate /= prediv;
+		clk->rate *= mult;
+		clk->rate /= postdiv;
+	}
+
+	pr_debug("PLL%d: input = %lu MHz [ ",
+		 pll->num, clk->parent->rate / 1000000);
+	if (bypass)
+		pr_debug("bypass ");
+	if (prediv > 1)
+		pr_debug("/ %d ", prediv);
+	if (mult > 1)
+		pr_debug("* %d ", mult);
+	if (postdiv > 1)
+		pr_debug("/ %d ", postdiv);
+	pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+  {
+	struct davinci_clk *c;
+	struct clk *clk;
+
+	for (c = clocks; c->lk.clk; c++) {
+		clk = c->lk.clk;
+
+		if (clk->pll_data)
+			clk_pll_init(clk);
+
+		/* Calculate rates for PLL-derived clocks */
+		else if (clk->flags & CLK_PLL)
+			clk_sysclk_recalc(clk);
+
+		if (clk->lpsc)
+			clk->flags |= CLK_PSC;
+
+		clkdev_add(&c->lk);
+		clk_register(clk);
+
+		/* Turn on clocks that Linux doesn't otherwise manage */
+		if (clk->flags & ALWAYS_ENABLED)
+			clk_enable(clk);
 	}
 
 	return 0;
@@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v)
 {
 }
 
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX	10		/* longest clock name */
+#define NEST_DELTA	2
+#define NEST_MAX	4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
 {
-	struct clk *cp;
+	char		*state;
+	char		buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+	struct clk	*clk;
+	unsigned	i;
+
+	if (parent->flags & CLK_PLL)
+		state = "pll";
+	else if (parent->flags & CLK_PSC)
+		state = "psc";
+	else
+		state = "";
+
+	/* <nest spaces> name <pad to end> */
+	memset(buf, ' ', sizeof(buf) - 1);
+	buf[sizeof(buf) - 1] = 0;
+	i = strlen(parent->name);
+	memcpy(buf + nest, parent->name,
+			min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+	seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+		   buf, parent->usecount, state, clk_get_rate(parent));
+	/* REVISIT show device associations too */
+
+	/* cost is now small, but not linear... */
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->parent == parent)
+			dump_clock(s, nest + NEST_DELTA, clk);
+	}
+}
 
-	list_for_each_entry(cp, &clocks, node)
-		seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+	/* Show clock tree; we know the main oscillator is first.
+	 * We trust nonzero usecounts equate to PSC enables...
+	 */
+	mutex_lock(&clocks_mutex);
+	if (!list_empty(&clocks))
+		dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+	mutex_unlock(&clocks_mutex);
 
 	return 0;
 }
@@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void)
 
 }
 __initcall(davinci_ck_proc_init);
-#endif	/* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index ed47079a52e..35736ec202f 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -1,7 +1,8 @@
 /*
  * TI DaVinci clock definitions
  *
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,23 +12,85 @@
 #ifndef __ARCH_ARM_DAVINCI_CLOCK_H
 #define __ARCH_ARM_DAVINCI_CLOCK_H
 
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL          0x100
+#define PLLCTL_PLLEN    BIT(0)
+#define PLLCTL_CLKMODE  BIT(8)
+
+#define PLLM		0x110
+#define PLLM_PLLM_MASK  0xff
+
+#define PREDIV          0x114
+#define PLLDIV1         0x118
+#define PLLDIV2         0x11c
+#define PLLDIV3         0x120
+#define POSTDIV         0x128
+#define BPDIV           0x12c
+#define PLLCMD		0x138
+#define PLLSTAT		0x13c
+#define PLLALNCTL	0x140
+#define PLLDCHANGE	0x144
+#define PLLCKEN		0x148
+#define PLLCKSTAT	0x14c
+#define PLLSYSTAT	0x150
+#define PLLDIV4         0x160
+#define PLLDIV5         0x164
+#define PLLDIV6         0x168
+#define PLLDIV7         0x16c
+#define PLLDIV8         0x170
+#define PLLDIV9         0x174
+#define PLLDIV_EN       BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+	u32 phys_base;
+	void __iomem *base;
+	u32 num;
+	u32 flags;
+	u32 input_rate;
+};
+#define PLL_HAS_PREDIV          0x01
+#define PLL_HAS_POSTDIV         0x02
+
 struct clk {
 	struct list_head	node;
 	struct module		*owner;
 	const char		*name;
-	unsigned int		*rate;
-	int			id;
-	__s8			usecount;
-	__u8			flags;
-	__u8			lpsc;
+	unsigned long		rate;
+	u8			usecount;
+	u8			flags;
+	u8			lpsc;
+	struct clk              *parent;
+	struct pll_data         *pll_data;
+	u32                     div_reg;
 };
 
 /* Clock flags */
-#define RATE_CKCTL		1
-#define RATE_FIXED		2
-#define RATE_PROPAGATES		4
-#define VIRTUAL_CLOCK		8
-#define ALWAYS_ENABLED		16
-#define ENABLE_REG_32BIT	32
+#define ALWAYS_ENABLED		BIT(1)
+#define CLK_PSC                 BIT(2)
+#define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL			BIT(4) /* PLL-derived clock */
+#define PRE_PLL                 BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) 		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
 
+int davinci_clk_init(struct davinci_clk *clocks);
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h
new file mode 100644
index 00000000000..730c49d1ebd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clkdev.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
index 38bdd49bc18..a3b04021987 100644
--- a/arch/arm/mach-davinci/include/mach/clock.h
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -17,6 +17,5 @@ struct clk;
 
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
 
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 4977aa071e1..55a90d419fa 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -38,8 +38,6 @@
 #define DAVINCI_LPSC_TPTC1          4
 #define DAVINCI_LPSC_EMAC           5
 #define DAVINCI_LPSC_EMAC_WRAPPER   6
-#define DAVINCI_LPSC_MDIO           7
-#define DAVINCI_LPSC_IEEE1394       8
 #define DAVINCI_LPSC_USB            9
 #define DAVINCI_LPSC_ATA            10
 #define DAVINCI_LPSC_VLYNQ          11
@@ -47,7 +45,6 @@
 #define DAVINCI_LPSC_DDR_EMIF       13
 #define DAVINCI_LPSC_AEMIF          14
 #define DAVINCI_LPSC_MMC_SD         15
-#define DAVINCI_LPSC_MEMSTICK       16
 #define DAVINCI_LPSC_McBSP          17
 #define DAVINCI_LPSC_I2C            18
 #define DAVINCI_LPSC_UART0          19
@@ -73,4 +70,54 @@
 #define DAVINCI_LPSC_GEM            39
 #define DAVINCI_LPSC_IMCOP          40
 
+#define DM355_LPSC_TIMER3		5
+#define DM355_LPSC_SPI1			6
+#define DM355_LPSC_MMC_SD1		7
+#define DM355_LPSC_McBSP1		8
+#define DM355_LPSC_PWM3			10
+#define DM355_LPSC_SPI2			11
+#define DM355_LPSC_RTO			12
+#define DM355_LPSC_VPSS_DAC		41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM            0
+#define DM646X_LPSC_C64X_CPU       1
+#define DM646X_LPSC_HDVICP0        2
+#define DM646X_LPSC_HDVICP1        3
+#define DM646X_LPSC_TPCC           4
+#define DM646X_LPSC_TPTC0          5
+#define DM646X_LPSC_TPTC1          6
+#define DM646X_LPSC_TPTC2          7
+#define DM646X_LPSC_TPTC3          8
+#define DM646X_LPSC_PCI            13
+#define DM646X_LPSC_EMAC           14
+#define DM646X_LPSC_VDCE           15
+#define DM646X_LPSC_VPSSMSTR       16
+#define DM646X_LPSC_VPSSSLV        17
+#define DM646X_LPSC_TSIF0          18
+#define DM646X_LPSC_TSIF1          19
+#define DM646X_LPSC_DDR_EMIF       20
+#define DM646X_LPSC_AEMIF          21
+#define DM646X_LPSC_McASP0         22
+#define DM646X_LPSC_McASP1         23
+#define DM646X_LPSC_CRGEN0         24
+#define DM646X_LPSC_CRGEN1         25
+#define DM646X_LPSC_UART0          26
+#define DM646X_LPSC_UART1          27
+#define DM646X_LPSC_UART2          28
+#define DM646X_LPSC_PWM0           29
+#define DM646X_LPSC_PWM1           30
+#define DM646X_LPSC_I2C            31
+#define DM646X_LPSC_SPI            32
+#define DM646X_LPSC_GPIO           33
+#define DM646X_LPSC_TIMER0         34
+#define DM646X_LPSC_TIMER1         35
+#define DM646X_LPSC_ARM_INTC       45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+			       char enable);
+
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 299515f70b8..71a7ae342b9 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -53,5 +53,4 @@ void __init davinci_map_common_io(void)
 
 void __init davinci_init_common_hw(void)
 {
-	davinci_clk_init();
 }
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 58754f066d5..c5098831741 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#include <mach/cputype.h>
 #include <mach/hardware.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
@@ -36,76 +37,57 @@
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
-/* System control register offsets */
-#define VDD3P3V_PWDN	0x48
 
-static void davinci_psc_mux(unsigned int id)
+/* Return nonzero iff the domain's clock is active */
+int __init davinci_psc_is_clk_active(unsigned int id)
 {
-	switch (id) {
-	case DAVINCI_LPSC_ATA:
-		davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
-		davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
-		break;
-	case DAVINCI_LPSC_MMC_SD:
-		/* VDD power manupulations are done in U-Boot for CPMAC
-		 * so applies to MMC as well
-		 */
-		/*Set up the pull regiter for MMC */
-		davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
-		davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
-		break;
-	case DAVINCI_LPSC_I2C:
-		davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
-		break;
-	case DAVINCI_LPSC_McBSP:
-		davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
-		break;
-	default:
-		break;
-	}
+	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+	u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+
+	/* if clocked, state can be "Enable" or "SyncReset" */
+	return mdstat & BIT(12);
 }
 
 /* Enable or disable a PSC domain */
 void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
 
-	mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	if (enable)
 		mdctl |= 0x00000003;	/* Enable Module */
 	else
-		mdctl &= 0xFFFFFFF2;	/* Disable Module */
-	davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+		mdctl &= 0xFFFFFFE2;	/* Disable Module */
+	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
-	pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+	pdstat = __raw_readl(psc_base + PDSTAT);
 	if ((pdstat & 0x00000001) == 0) {
-		pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+		pdctl1 = __raw_readl(psc_base + PDCTL1);
 		pdctl1 |= 0x1;
-		davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+		__raw_writel(pdctl1, psc_base + PDCTL1);
 
 		ptcmd = 1 << domain;
-		davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+		__raw_writel(ptcmd, psc_base + PTCMD);
 
 		do {
-			epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
-					      EPCPR);
+			epcpr = __raw_readl(psc_base + EPCPR);
 		} while ((((epcpr >> domain) & 1) == 0));
 
-		pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+		pdctl1 = __raw_readl(psc_base + PDCTL1);
 		pdctl1 |= 0x100;
-		davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+		__raw_writel(pdctl1, psc_base + PDCTL1);
 
 		do {
-			ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+			ptstat = __raw_readl(psc_base +
 					       PTSTAT);
 		} while (!(((ptstat >> domain) & 1) == 0));
 	} else {
 		ptcmd = 1 << domain;
-		davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+		__raw_writel(ptcmd, psc_base + PTCMD);
 
 		do {
-			ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
-					       PTSTAT);
+			ptstat = __raw_readl(psc_base + PTSTAT);
 		} while (!(((ptstat >> domain) & 1) == 0));
 	}
 
@@ -115,23 +97,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 		mdstat_mask = 0x2;
 
 	do {
-		mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
-				       MDSTAT + 4 * id);
+		mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 	} while (!((mdstat & 0x0000001F) == mdstat_mask));
-
-	if (enable)
-		davinci_psc_mux(id);
-}
-
-void __init davinci_psc_init(void)
-{
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
-
-	/* Turn on WatchDog timer LPSC.	 Needed for RESET to work */
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
 }
-- 
GitLab


From f5c122da543ebf98a5ccb3166768e38eea3120dd Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 07:04:16 -0500
Subject: [PATCH 0746/1421] davinci: add arch_ioremap() which uses existing
 static mappings

Add arch-specific ioremap() which uses any existing static mappings in
place of doing a new mapping.  From now on, drivers should always use
ioremap() instead of IO_ADDRESS().

In addition, remove the davinci_[read|write]* macros in favor of using
ioremap.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-evm.c             |  4 +-
 arch/arm/mach-davinci/devices.c               |  2 +
 arch/arm/mach-davinci/id.c                    |  6 +-
 arch/arm/mach-davinci/include/mach/gpio.h     |  4 +-
 arch/arm/mach-davinci/include/mach/hardware.h | 51 +++---------
 arch/arm/mach-davinci/include/mach/io.h       | 20 ++---
 arch/arm/mach-davinci/io.c                    | 22 +++++-
 arch/arm/mach-davinci/irq.c                   |  6 +-
 arch/arm/mach-davinci/mux.c                   |  5 +-
 arch/arm/mach-davinci/psc.c                   |  2 +
 arch/arm/mach-davinci/time.c                  | 79 +++++++++++--------
 arch/arm/mach-davinci/usb.c                   |  2 +
 12 files changed, 105 insertions(+), 98 deletions(-)

diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 1b745c39d89..c2701d740a1 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -36,6 +36,9 @@
 #include <mach/common.h>
 #include <mach/i2c.h>
 
+#define DAVINCI_CFC_ATA_BASE		  0x01C66000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
 /* other misc. init functions */
 void __init davinci_psc_init(void);
 void __init davinci_irq_init(void);
@@ -422,7 +425,6 @@ static __init void davinci_evm_init(void)
 
 static __init void davinci_evm_irq_init(void)
 {
-	davinci_init_common_hw();
 	davinci_irq_init();
 }
 
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 808633f9f03..3ea6d477f06 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -22,6 +22,8 @@
 #include <mach/i2c.h>
 #include <mach/irqs.h>
 
+#define DAVINCI_I2C_BASE	     0x01C21000
+
 static struct resource i2c_resources[] = {
 	{
 		.start		= DAVINCI_I2C_BASE,
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
index 379f2baf66d..018b994cd79 100644
--- a/arch/arm/mach-davinci/id.c
+++ b/arch/arm/mach-davinci/id.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#define JTAG_ID_BASE		0x01c40028
+#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
 
 static unsigned int davinci_revision;
 
@@ -58,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
 {
 	u32 dev_id, part_no;
 
-	dev_id = davinci_readl(JTAG_ID_BASE);
+	dev_id = __raw_readl(JTAG_ID_BASE);
 
 	part_no = ((dev_id >> 12) & 0xffff);
 
@@ -72,7 +72,7 @@ static u8 __init davinci_get_variant(void)
 {
 	u32 variant;
 
-	variant = davinci_readl(JTAG_ID_BASE);
+	variant = __raw_readl(JTAG_ID_BASE);
 
 	variant = (variant >> 28) & 0xf;
 
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index b456f079f43..5e7c36b202f 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -15,9 +15,11 @@
 
 #include <linux/io.h>
 #include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
 #include <mach/irqs.h>
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+
 /*
  * basic gpio routines
  *
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index a2e8969afac..48c77934d51 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -1,9 +1,9 @@
 /*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
  *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -12,41 +12,16 @@
 #define __ASM_ARCH_HARDWARE_H
 
 /*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
  */
-#define DAVINCI_DMA_3PCC_BASE			(0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE			(0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE			(0x01C10400)
-#define DAVINCI_I2C_BASE			(0x01C21000)
-#define DAVINCI_PWM0_BASE			(0x01C22000)
-#define DAVINCI_PWM1_BASE			(0x01C22400)
-#define DAVINCI_PWM2_BASE			(0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE		(0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE			(0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE			(0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE		(0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE			(0x01C42000)
-#define DAVINCI_IEEE1394_BASE			(0x01C60000)
-#define DAVINCI_USB_OTG_BASE			(0x01C64000)
-#define DAVINCI_CFC_ATA_BASE			(0x01C66000)
-#define DAVINCI_SPI_BASE			(0x01C66800)
-#define DAVINCI_GPIO_BASE			(0x01C67000)
-#define DAVINCI_UHPI_BASE			(0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE			(0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE		(0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	(0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE		(0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE		(0x01C84000)
-#define DAVINCI_IMCOP_BASE			(0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		(0x01E00000)
-#define DAVINCI_VLYNQ_BASE			(0x01E01000)
-#define DAVINCI_MCBSP_BASE			(0x01E02000)
-#define DAVINCI_MMC_SD_BASE			(0x01E10000)
-#define DAVINCI_MS_BASE				(0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE		(0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE        0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN	0x48
 
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index a48795fd241..2479785405a 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -40,22 +40,12 @@
 #else
 #define IOMEM(x)                ((void __force __iomem *)(x))
 
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define davinci_readb(a)	__raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a)	__raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a)	__raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
+#define __arch_iounmap(v)	davinci_iounmap(v)
 
-#define davinci_writeb(v, a)	__raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a)	__raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a)	__raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+			      unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 71a7ae342b9..a548abb513e 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -51,6 +51,26 @@ void __init davinci_map_common_io(void)
 	davinci_check_revision();
 }
 
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+	if (BETWEEN(p, IO_PHYS, IO_SIZE))
+		return XLATE(p, IO_PHYS, IO_VIRT);
+
+	return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
 {
+	unsigned long virt = (unsigned long)addr;
+
+	if (virt >= VMALLOC_START && virt < VMALLOC_END)
+		__iounmap(addr);
 }
+EXPORT_SYMBOL(davinci_iounmap);
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 38021af8359..e76835cf101 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -40,14 +40,16 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
 static inline unsigned int davinci_irq_readl(int offset)
 {
-	return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+	return __raw_readl(INTC_BASE + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-	davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+	__raw_writel(value, INTC_BASE + offset);
 }
 
 /* Disable interrupt */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 8ff9d8aca60..53734dee1f9 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(mux_lock);
 
 void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
 {
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
 	u32 pinmux, muxreg = PINMUX0;
 
 	if (mux >= DAVINCI_MUX_LEVEL2) {
@@ -31,11 +32,11 @@ void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
 	}
 
 	spin_lock(&mux_lock);
-	pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
+	pinmux = __raw_readl(base + muxreg);
 	if (enable)
 		pinmux |= (1 << mux);
 	else
 		pinmux &= ~(1 << mux);
-	davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
+	__raw_writel(pinmux, base + muxreg);
 	spin_unlock(&mux_lock);
 }
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index c5098831741..e44544ac2b1 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,6 +28,8 @@
 #include <mach/psc.h>
 #include <mach/mux.h>
 
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 6c227d4ba99..88864ae067b 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -16,6 +16,9 @@
 #include <linux/clockchips.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -24,6 +27,8 @@
 #include <asm/mach/time.h>
 #include <asm/errno.h>
 #include <mach/io.h>
+#include <mach/cputype.h>
+#include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
 
@@ -99,9 +104,9 @@ struct timer_s {
 	unsigned int id;
 	unsigned long period;
 	unsigned long opts;
-	unsigned long reg_base;
-	unsigned long tim_reg;
-	unsigned long prd_reg;
+	void __iomem *base;
+	unsigned long tim_off;
+	unsigned long prd_off;
 	unsigned long enamode_shift;
 	struct irqaction irqaction;
 };
@@ -114,15 +119,15 @@ static struct timer_s timers[];
 
 static int timer32_config(struct timer_s *t)
 {
-	u32 tcr = davinci_readl(t->reg_base + TCR);
+	u32 tcr = __raw_readl(t->base + TCR);
 
 	/* disable timer */
 	tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-	davinci_writel(tcr, t->reg_base + TCR);
+	__raw_writel(tcr, t->base + TCR);
 
 	/* reset counter to zero, set new period */
-	davinci_writel(0, t->tim_reg);
-	davinci_writel(t->period, t->prd_reg);
+	__raw_writel(0, t->base + t->tim_off);
+	__raw_writel(t->period, t->base + t->prd_off);
 
 	/* Set enable mode */
 	if (t->opts & TIMER_OPTS_ONESHOT) {
@@ -131,13 +136,13 @@ static int timer32_config(struct timer_s *t)
 		tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
 	}
 
-	davinci_writel(tcr, t->reg_base + TCR);
+	__raw_writel(tcr, t->base + TCR);
 	return 0;
 }
 
 static inline u32 timer32_read(struct timer_s *t)
 {
-	return davinci_readl(t->tim_reg);
+	return __raw_readl(t->base + t->tim_off);
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -176,51 +181,54 @@ static struct timer_s timers[] = {
 
 static void __init timer_init(void)
 {
-	u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+	u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
-		u32 tgcr, base = bases[i];
+		u32 tgcr;
+		void __iomem *base = IO_ADDRESS(phys_bases[i]);
 
 		/* Disabled, Internal clock source */
-		davinci_writel(0, base + TCR);
+		__raw_writel(0, base + TCR);
 
 		/* reset both timers, no pre-scaler for timer34 */
 		tgcr = 0;
-		davinci_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base + TGCR);
 
 		/* Set both timers to unchained 32-bit */
 		tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
-		davinci_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base + TGCR);
 
 		/* Unreset timers */
 		tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 			(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-		davinci_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base + TGCR);
 
 		/* Init both counters to zero */
-		davinci_writel(0, base + TIM12);
-		davinci_writel(0, base + TIM34);
+		__raw_writel(0, base + TIM12);
+		__raw_writel(0, base + TIM34);
 	}
 
 	/* Init of each timer as a 32-bit timer */
 	for (i=0; i< ARRAY_SIZE(timers); i++) {
 		struct timer_s *t = &timers[i];
+		u32 phys_base;
 
 		if (t->name) {
 			t->id = i;
-			t->reg_base = (IS_TIMER1(t->id) ?
+			phys_base = (IS_TIMER1(t->id) ?
 			       DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+			t->base = IO_ADDRESS(phys_base);
 
 			if (IS_TIMER_BOT(t->id)) {
 				t->enamode_shift = 6;
-				t->tim_reg = t->reg_base + TIM12;
-				t->prd_reg = t->reg_base + PRD12;
+				t->tim_off = TIM12;
+				t->prd_off = PRD12;
 			} else {
 				t->enamode_shift = 22;
-				t->tim_reg = t->reg_base + TIM34;
-				t->prd_reg = t->reg_base + PRD34;
+				t->tim_off = TIM34;
+				t->prd_off = PRD34;
 			}
 
 			/* Register interrupt */
@@ -333,42 +341,43 @@ struct sys_timer davinci_timer = {
 
 /* reset board using watchdog timer */
 void davinci_watchdog_reset(void) {
-	u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+	u32 tgcr, wdtcr;
+	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
 
 	/* disable, internal clock source */
-	davinci_writel(0, base + TCR);
+	__raw_writel(0, base + TCR);
 
 	/* reset timer, set mode to 64-bit watchdog, and unreset */
 	tgcr = 0;
-	davinci_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TCR);
 	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
 	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	davinci_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TCR);
 
 	/* clear counter and period regs */
-	davinci_writel(0, base + TIM12);
-	davinci_writel(0, base + TIM34);
-	davinci_writel(0, base + PRD12);
-	davinci_writel(0, base + PRD34);
+	__raw_writel(0, base + TIM12);
+	__raw_writel(0, base + TIM34);
+	__raw_writel(0, base + PRD12);
+	__raw_writel(0, base + PRD34);
 
 	/* enable */
-	wdtcr = davinci_readl(base + WDTCR);
+	wdtcr = __raw_readl(base + WDTCR);
 	wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
-	davinci_writel(wdtcr, base + WDTCR);
+	__raw_writel(wdtcr, base + WDTCR);
 
 	/* put watchdog in pre-active state */
 	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
-	davinci_writel(wdtcr, base + WDTCR);
+	__raw_writel(wdtcr, base + WDTCR);
 
 	/* put watchdog in active state */
 	wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
-	davinci_writel(wdtcr, base + WDTCR);
+	__raw_writel(wdtcr, base + WDTCR);
 
 	/* write an invalid value to the WDKEY field to trigger
 	 * a watchdog reset */
 	wdtcr = 0x00004000;
-	davinci_writel(wdtcr, base + WDTCR);
+	__raw_writel(wdtcr, base + WDTCR);
 }
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 2429b79f6da..abedb633718 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -14,6 +14,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
 	{ "ep1_tx", 8, },
-- 
GitLab


From da1b94e6a68e1bdeb9cdda016cceb17228b37d25 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 23 Apr 2009 11:10:40 -0700
Subject: [PATCH 0747/1421] ARM: OMAP: Fix for possible race condition in
 omap_free_dma()

Fix the possible race condition in omap_free_dma(). Function omap_free_dma()
sets the dev_id = -1 and then accesses the channel afterwards to clear it.
But setting the dev_id=-1 makes the channel available for allocation again.
So it is possible someone else can grab it and results are unpredictable.
To avod this DMA channle is cleared first and then the dev_id = -1 is set.

Thanks to McNeil, Sean <sean.mcneil@ti.com> for ointing out this issue.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 21cc0142b97..7fc8c045ad5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -760,19 +760,12 @@ void omap_free_dma(int lch)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&dma_chan_lock, flags);
 	if (dma_chan[lch].dev_id == -1) {
 		pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
 		       lch);
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
 		return;
 	}
 
-	dma_chan[lch].dev_id = -1;
-	dma_chan[lch].next_lch = -1;
-	dma_chan[lch].callback = NULL;
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-
 	if (cpu_class_is_omap1()) {
 		/* Disable all DMA interrupts for the channel. */
 		dma_write(0, CICR(lch));
@@ -798,6 +791,12 @@ void omap_free_dma(int lch)
 		dma_write(0, CCR(lch));
 		omap_clear_dma(lch);
 	}
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	dma_chan[lch].dev_id = -1;
+	dma_chan[lch].next_lch = -1;
+	dma_chan[lch].callback = NULL;
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 EXPORT_SYMBOL(omap_free_dma);
 
-- 
GitLab


From ba16ec7cabb3f1aa7bbcb7b9982c4402a2e8ec02 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 23 Apr 2009 11:10:40 -0700
Subject: [PATCH 0748/1421] ARM: OMAP: Remove old dead gpio expander code

This should be done with GPIO calls. Patches against the
mainline tree welcome to add the necessary working functionality
back.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-h3.c                | 101 ------------------
 arch/arm/mach-omap2/board-h4.c                |  95 ----------------
 .../arm/plat-omap/include/mach/gpioexpander.h |  35 ------
 arch/arm/plat-omap/include/mach/irda.h        |   4 -
 4 files changed, 235 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/gpioexpander.h

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4695965114c..f597968733b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -39,12 +39,10 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpioexpander.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
-#include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/dma.h>
@@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = {
 	.resource	= h3_kp_resources,
 };
 
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
-	unsigned char expa;
-	int err = 0;
-
-	if ((err = read_gpio_expa(&expa, 0x26))) {
-		printk(KERN_ERR "Error reading from I/O EXPANDER \n");
-		return err;
-	}
-
-	/* 'P6' enable/disable IRDA_TX and IRDA_RX */
-	if (state & IR_SEL) { /* IrDA */
-		if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
-			printk(KERN_ERR "Error writing to I/O EXPANDER \n");
-			return err;
-		}
-	} else {
-		if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
-			printk(KERN_ERR "Error writing to I/O EXPANDER \n");
-			return err;
-		}
-	}
-	return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
-	struct omap_irda_config *irda_config =
-		container_of(work, struct omap_irda_config, gpio_expa.work);
-	int mode = irda_config->mode;
-	unsigned char expa;
-	int err = 0;
-
-	if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
-		printk(KERN_ERR "Error reading from I/O expander\n");
-	}
-
-	expa &= ~0x03;
-
-	if (mode & IR_SIRMODE) {
-		expa |= 0x01;
-	} else { /* MIR/FIR */
-		expa |= 0x03;
-	}
-
-	if ((err = write_gpio_expa(expa, 0x27)) != 0) {
-		printk(KERN_ERR "Error writing to I/O expander\n");
-	}
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
-	struct omap_irda_config *irda_config = dev->platform_data;
-
-	irda_config->mode = mode;
-	cancel_delayed_work(&irda_config->gpio_expa);
-	PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
-	schedule_delayed_work(&irda_config->gpio_expa, 0);
-
-	return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
-	.transceiver_mode	= h3_transceiver_mode,
-	.select_irda	 	= h3_select_irda,
-	.rx_channel		= OMAP_DMA_UART3_RX,
-	.tx_channel		= OMAP_DMA_UART3_TX,
-	.dest_start		= UART3_THR,
-	.src_start		= UART3_RHR,
-	.tx_trigger		= 0,
-	.rx_trigger		= 0,
-};
-
-static struct resource h3_irda_resources[] = {
-	[0] = {
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
-	.name		= "omapirda",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h3_irda_data,
-		.dma_mask	= &irda_dmamask,
-	},
-	.num_resources	= ARRAY_SIZE(h3_irda_resources),
-	.resource	= h3_irda_resources,
-};
-
 static struct platform_device h3_lcd_device = {
 	.name		= "lcd_h3",
 	.id		= -1,
@@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = {
 	&nand_device,
         &smc91x_device,
 	&intlat_device,
-	&h3_irda_device,
 	&h3_kp_device,
 	&h3_lcd_device,
 };
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a0267a9ab46..e7d017cdc43 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -33,10 +33,8 @@
 
 #include <mach/control.h>
 #include <mach/gpio.h>
-#include <mach/gpioexpander.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
-#include <mach/irda.h>
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/keypad.h>
@@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = {
 	.resource	= &h4_flash_resource,
 };
 
-/* Select between the IrDA and aGPS module
- */
-static int h4_select_irda(struct device *dev, int state)
-{
-	unsigned char expa;
-	int err = 0;
-
-	if ((err = read_gpio_expa(&expa, 0x21))) {
-		printk(KERN_ERR "Error reading from I/O expander\n");
-		return err;
-	}
-
-	/* 'P6' enable/disable IRDA_TX and IRDA_RX */
-	if (state & IR_SEL) {	/* IrDa */
-		if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
-			printk(KERN_ERR "Error writing to I/O expander\n");
-			return err;
-		}
-	} else {
-		if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
-			printk(KERN_ERR "Error writing to I/O expander\n");
-			return err;
-		}
-	}
-	return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
-	struct omap_irda_config *irda_config =
-		container_of(work, struct omap_irda_config, gpio_expa.work);
-	int mode = irda_config->mode;
-	unsigned char expa;
-	int err = 0;
-
-	if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
-		printk(KERN_ERR "Error reading from I/O expander\n");
-	}
-
-	expa &= ~0x01;
-
-	if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
-		expa |= 0x01;
-	}
-
-	if ((err = write_gpio_expa(expa, 0x20)) != 0) {
-		printk(KERN_ERR "Error writing to I/O expander\n");
-	}
-}
-
-static int h4_transceiver_mode(struct device *dev, int mode)
-{
-	struct omap_irda_config *irda_config = dev->platform_data;
-
-	irda_config->mode = mode;
-	cancel_delayed_work(&irda_config->gpio_expa);
-	PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
-	schedule_delayed_work(&irda_config->gpio_expa, 0);
-
-	return 0;
-}
-
-static struct omap_irda_config h4_irda_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
-	.transceiver_mode	= h4_transceiver_mode,
-	.select_irda	 	= h4_select_irda,
-	.rx_channel		= OMAP24XX_DMA_UART3_RX,
-	.tx_channel		= OMAP24XX_DMA_UART3_TX,
-	.dest_start		= OMAP_UART3_BASE,
-	.src_start		= OMAP_UART3_BASE,
-	.tx_trigger		= OMAP24XX_DMA_UART3_TX,
-	.rx_trigger		= OMAP24XX_DMA_UART3_RX,
-};
-
-static struct resource h4_irda_resources[] = {
-	[0] = {
-		.start	= INT_24XX_UART3_IRQ,
-		.end	= INT_24XX_UART3_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device h4_irda_device = {
-	.name		= "omapirda",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &h4_irda_data,
-	},
-	.num_resources	= 1,
-	.resource	= h4_irda_resources,
-};
-
 static struct omap_kp_platform_data h4_kp_data = {
 	.rows		= 6,
 	.cols		= 7,
@@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = {
 
 static struct platform_device *h4_devices[] __initdata = {
 	&h4_flash_device,
-	&h4_irda_device,
 	&h4_kp_device,
 	&h4_lcd_device,
 };
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
deleted file mode 100644
index 90444a0d6b1..00000000000
--- a/arch/arm/plat-omap/include/mach/gpioexpander.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
-	return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
-	return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
index 8372a00d8e0..40f60339d1c 100644
--- a/arch/arm/plat-omap/include/mach/irda.h
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -21,10 +21,6 @@ struct omap_irda_config {
 	int transceiver_cap;
 	int (*transceiver_mode)(struct device *dev, int mode);
 	int (*select_irda)(struct device *dev, int state);
-	/* Very specific to the needs of some platforms (h3,h4)
-	 * having calls which can sleep in irda_set_speed.
-	 */
-	struct delayed_work gpio_expa;
 	int rx_channel;
 	int tx_channel;
 	unsigned long dest_start;
-- 
GitLab


From 1748ae0e95760d62de501743f883af6833f33357 Mon Sep 17 00:00:00 2001
From: Ladislav Michl <ladis@linux-mips.org>
Date: Thu, 23 Apr 2009 11:10:44 -0700
Subject: [PATCH 0749/1421] ARM: OMAP: MMC: Remove unused power_pin

Remove unused power_pin

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/mmc.h | 1 -
 drivers/mmc/host/omap.c               | 2 --
 2 files changed, 3 deletions(-)

diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 4435bd434e1..81d5b36534b 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -79,7 +79,6 @@ struct omap_mmc_platform_data {
 
 		/* use the internal clock */
 		unsigned internal_clock:1;
-		s16 power_pin;
 
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 5570849188c..bfa25c01c87 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -157,8 +157,6 @@ struct mmc_omap_host {
 	struct timer_list	dma_timer;
 	unsigned		dma_len;
 
-	short			power_pin;
-
 	struct mmc_omap_slot    *slots[OMAP_MMC_MAX_SLOTS];
 	struct mmc_omap_slot    *current_slot;
 	spinlock_t              slot_lock;
-- 
GitLab


From 6a3260755fc0d86adacd912e3acf40e9ac5bbe2e Mon Sep 17 00:00:00 2001
From: Ladislav Michl <ladis@linux-mips.org>
Date: Thu, 23 Apr 2009 11:10:47 -0700
Subject: [PATCH 0750/1421] ARM: OMAP1: Simplify board-h2 MMC setup

Simplify board-h2 MMC setup

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-h2-mmc.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 44d4a966bed..46098f54682 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -26,19 +26,13 @@
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-	if (power_on)
-		gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
-	else
-		gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
+	gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
 	return 0;
 }
 
 static int mmc_late_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
 	if (ret < 0)
 		return ret;
 
@@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev)
 	return ret;
 }
 
-static void mmc_shutdown(struct device *dev)
+static void mmc_cleanup(struct device *dev)
 {
 	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
 }
@@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev)
 static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
 	.init				= mmc_late_init,
-	.shutdown			= mmc_shutdown,
+	.cleanup			= mmc_cleanup,
 	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
 		.set_power              = mmc_set_power,
-- 
GitLab


From bac5b29fb9582df22b4c1386162ac31b62edf121 Mon Sep 17 00:00:00 2001
From: Ladislav Michl <ladis@linux-mips.org>
Date: Thu, 23 Apr 2009 11:10:48 -0700
Subject: [PATCH 0751/1421] ARM: OMAP1: Fix mmc_set_power GPIO usage

Simple simplification...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-h3-mmc.c   | 6 +-----
 arch/arm/mach-omap1/board-nokia770.c | 6 +-----
 2 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 0d8a3c195e2..5e8877ce35e 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -26,11 +26,7 @@
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-	if (power_on)
-		gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
-	else
-		gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
+	gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7bc7a3cb9c5..d1ed1365319 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-	if (power_on)
-		gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
-	else
-		gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
-
+	gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
 	return 0;
 }
 
-- 
GitLab


From 6b7bff3169192e2870f68f47fde25a22e136918e Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Thu, 23 Apr 2009 11:10:48 -0700
Subject: [PATCH 0752/1421] ARM: OMAP2: Remove defines and resource init for
 OMAP24XX EAC

There is no anymore legacy driver for OMAP24XX Enhanced Audio Controller
in linux-omap and it was newer in mainline so cleanup these unneeded
defines and initialization code.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c         |  33 ---------
 arch/arm/plat-omap/include/mach/eac.h | 100 --------------------------
 2 files changed, 133 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/eac.h

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d6b4b2f8722..496983ade97 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -25,7 +25,6 @@
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
-#include <mach/eac.h>
 #include <mach/mmc.h>
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
@@ -366,38 +365,6 @@ static void omap_init_mcspi(void)
 static inline void omap_init_mcspi(void) {}
 #endif
 
-#ifdef CONFIG_SND_OMAP24XX_EAC
-
-#define OMAP2_EAC_BASE			0x48090000
-
-static struct resource omap2_eac_resources[] = {
-	{
-		.start		= OMAP2_EAC_BASE,
-		.end		= OMAP2_EAC_BASE + 0x109,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap2_eac_device = {
-	.name		= "omap24xx-eac",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap2_eac_resources),
-	.resource	= omap2_eac_resources,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
-void omap_init_eac(struct eac_platform_data *pdata)
-{
-	omap2_eac_device.dev.platform_data = pdata;
-	platform_device_register(&omap2_eac_device);
-}
-
-#else
-void omap_init_eac(struct eac_platform_data *pdata) {}
-#endif
-
 #ifdef CONFIG_OMAP_SHA1_MD5
 static struct resource sha1_md5_resources[] = {
 	{
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
deleted file mode 100644
index 9e62cf03027..00000000000
--- a/arch/arm/plat-omap/include/mach/eac.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK	0x100
-enum eac_mclk_src {
-	EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
-	EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
-	EAC_MCLK_EXT_12288000,
-	EAC_MCLK_EXT_2x11289600,
-	EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
-	EAC_CODEC_PCM,
-	EAC_CODEC_AC97,
-	EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
-	EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
-	/* if enabled, then first data slot (left channel) is signaled as
-	 * positive level of frame sync EAC.AC_FS */
-	unsigned	polarity_changed_mode:1;
-	/* if enabled, then serial data starts one clock cycle after the
-	 * of EAC.AC_FS for first audio slot */
-	unsigned	sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
-	enum eac_mclk_src	mclk_src;
-
-	enum eac_codec_mode	codec_mode;
-	union {
-		struct eac_i2s_conf	i2s;
-	} codec_conf;
-
-	int		default_rate; /* audio sampling rate */
-
-	int		(* set_power)(void *private_data, int dac, int adc);
-	int		(* register_controls)(void *private_data,
-					      struct snd_card *card);
-	const char 	*short_name;
-
-	void		*private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
-        int	(* init)(struct device *eac_dev);
-	void	(* cleanup)(struct device *eac_dev);
-	/* these callbacks are used to configure & control external MCLK
-	 * source. NULL if not used */
-	int	(* enable_ext_clocks)(struct device *eac_dev);
-	void	(* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
-- 
GitLab


From d94a2eddf50c4aa1553acf3025f45d03704a1f97 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 23 Apr 2009 11:10:49 -0700
Subject: [PATCH 0753/1421] ARM: OMAP2: possible division by 0

In linus' git tree the functions can be found at:
vi arch/arm/mach-omap2/usb-tusb6010.c +200	- tusb6010_platform_retime()
vi arch/arm/mach-omap2/gpmc.c +94		- gpmc_get_fclk_period()
vi arch/arm/mach-omap2/usb-tusb6010.c +53	- tusb_set_async_mode()
vi arch/arm/mach-omap2/usb-tusb6010.c +111	- tusb_set_sync_mode()

is -ENODEV appropriate when sysclk_ps == 0?

This was found by code analysis, please review.
------------------------------>8-------------8<---------------------------------
gpmc_get_fclk_period() may return 0 when gpmc_l3_clk is not enabled. This is
not checked in tusb6010_platform_retime() nor in tusb_set_async_mode() it
seems. In tusb_set_sync_mode() this may result in a division by zero.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-tusb6010.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 15e509013de..8df55f40f4c 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
 	unsigned	sysclk_ps;
 	int		status;
 
-	if (!refclk_psec)
+	if (!refclk_psec || sysclk_ps == 0)
 		return -ENODEV;
 
 	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
-- 
GitLab


From b3bb4f688c225d9455bbd59e98f634f98c1074d0 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 23 Apr 2009 11:10:49 -0700
Subject: [PATCH 0754/1421] ARM: OMAP2/3: GPIO: do not attempt to wake-enable

The GPIO IRQ enable/disable path attempts to also enable IRQ wake
support for the parent GPIO bank IRQ as well.  However, since there is
no 'set_wake' hook for the bank IRQs, these calls will always fail.
Also, since the enable will fail on the suspend path, the disable on
the resume path will trigger unbalanced enable/disable warnings.

This was discovered in the suspend/resume path on OMAP3/Beagle using
the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the
suspend/resume path.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d3fa41e3d8c..210a1c04555 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -921,13 +921,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 	case METHOD_MPUIO:
 	case METHOD_GPIO_1610:
 		spin_lock_irqsave(&bank->lock, flags);
-		if (enable) {
+		if (enable)
 			bank->suspend_wakeup |= (1 << gpio);
-			enable_irq_wake(bank->irq);
-		} else {
-			disable_irq_wake(bank->irq);
+		else
 			bank->suspend_wakeup &= ~(1 << gpio);
-		}
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
@@ -940,13 +937,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 			return -EINVAL;
 		}
 		spin_lock_irqsave(&bank->lock, flags);
-		if (enable) {
+		if (enable)
 			bank->suspend_wakeup |= (1 << gpio);
-			enable_irq_wake(bank->irq);
-		} else {
-			disable_irq_wake(bank->irq);
+		else
 			bank->suspend_wakeup &= ~(1 << gpio);
-		}
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-- 
GitLab


From c485ab50dd90412d88e25ed30b4e0d5ff636ffe2 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 23 Apr 2009 11:10:49 -0700
Subject: [PATCH 0755/1421] ARM: OMAP3: remove duplicated #include

Removed duplicated #include in arch/arm/mach-omap2/board-rx51.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 3a0daac6c83..374ff63c3eb 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -15,7 +15,6 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 #include <linux/gpio.h>
 
 #include <mach/hardware.h>
-- 
GitLab


From bedfd15410a331e4183d3d926bb944682cad61f3 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Thu, 23 Apr 2009 11:10:50 -0700
Subject: [PATCH 0756/1421] ARM: OMAP3: Fixed spurious IRQ issue for GPIO
 interrupts

Flush posted write to IRQSTATUS register in GPIO IRQ handler.
This eliminates the below error for all peripherals that use GPIO interrupts.

<4>Spurious irq 95: 0xffffffdf, please flush posted write for irq 31

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 210a1c04555..17d7afe42b8 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		__raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
+		__raw_writel(gpio_mask, reg);
+
+	/* Flush posted write for the irq status to avoid spurious interrupts */
+	__raw_readl(reg);
 #endif
 }
 
-- 
GitLab


From 846c29f109fc27bd93817271689a752afc9168f8 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Thu, 23 Apr 2009 11:10:50 -0700
Subject: [PATCH 0757/1421] ARM: OMAP3: Clean up spurious interrupt check logic

SPURIOUSIRQ is contained in bits 31:7 of INTC_SIR, so
INTC_SIR must be right shifted by 7, not 6.

No change in logic, only changes for better readability.
Refer to register definition of INTCPS_SIR_IRQ in OMAP3 Manual.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ba20d985dd..998c5c45587 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq)
 	u32 sir, spurious;
 
 	sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
-	spurious = sir >> 6;
+	spurious = sir >> 7;
 
-	if (spurious > 1) {
+	if (spurious) {
 		printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
 					"posted write for irq %i\n",
 					irq, sir, previous_irq);
-- 
GitLab


From 33e86019f77b6358bfe06767e08154be032d8751 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 23 Apr 2009 22:53:43 +0200
Subject: [PATCH 0758/1421] palm_bk3710: those registers/bitfields don't exist

Bugfixes noted by checking the code against the controller
documentation (TI document number SPRUE21):

 - Remove declarations for eight non-existent registers (!);
   and remove accesses to two of them.

 - Remove access to various non-existent bitfields in some of
   the registers which *do* exist (those fields must-be-zero).

 - Provide comment to replace bogus reset logic (removed above,
   it relied on non-existent bitfields).  Resets require GPIO
   help; this driver doesn't currently know about that.

With some minor cleanup:  relocate a comment, avoid an extra
lookup of the PIO timings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/palm_bk3710.c | 67 +++++++++++----------------------------
 1 file changed, 18 insertions(+), 49 deletions(-)

diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index d1513b4a457..13a5449aabf 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -42,16 +42,9 @@
 #define BK3710_BMICP		0x00
 #define BK3710_BMISP		0x02
 #define BK3710_BMIDTP		0x04
-#define BK3710_BMICS		0x08
-#define BK3710_BMISS		0x0A
-#define BK3710_BMIDTS		0x0C
 #define BK3710_IDETIMP		0x40
-#define BK3710_IDETIMS		0x42
-#define BK3710_SIDETIM		0x44
-#define BK3710_SLEWCTL		0x45
 #define BK3710_IDESTATUS	0x47
 #define BK3710_UDMACTL		0x48
-#define BK3710_UDMATIM		0x4A
 #define BK3710_MISCCTL		0x50
 #define BK3710_REGSTB		0x54
 #define BK3710_REGRCVR		0x58
@@ -63,7 +56,6 @@
 #define BK3710_UDMATRP		0x70
 #define BK3710_UDMAENV		0x74
 #define BK3710_IORDYTMP		0x78
-#define BK3710_IORDYTMS		0x7C
 
 static unsigned ideclk_period; /* in nanoseconds */
 
@@ -96,11 +88,6 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
 	trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
 			   ideclk_period) - 1;
 
-	/* udmatim Register */
-	val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
-	val16 |= (mode << (dev ? 4 : 0));
-	writew(val16, base + BK3710_UDMATIM);
-
 	/* udmastb Ultra DMA Access Strobe Width */
 	val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
 	val32 |= (t0 << (dev ? 8 : 0));
@@ -161,10 +148,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 	u32 val32;
 	struct ide_timing *t;
 
+	t = ide_timing_find_mode(XFER_PIO_0 + mode);
+
 	/* PIO Data Setup */
 	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
-	t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
-			  ideclk_period);
+	t2 = DIV_ROUND_UP(t->active, ideclk_period);
 
 	t2i = t0 - t2 - 1;
 	t2 -= 1;
@@ -185,7 +173,6 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 	}
 
 	/* TASKFILE Setup */
-	t = ide_timing_find_mode(XFER_PIO_0 + mode);
 	t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
 	t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
 
@@ -234,42 +221,23 @@ static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
 static void __devinit palm_bk3710_chipinit(void __iomem *base)
 {
 	/*
-	 * enable the reset_en of ATA controller so that when ata signals
-	 * are brought out, by writing into device config. at that
-	 * time por_n signal should not be 'Z' and have a stable value.
+	 * REVISIT:  the ATA reset signal needs to be managed through a
+	 * GPIO, which means it should come from platform_data.  Until
+	 * we get and use such information, we have to trust that things
+	 * have been reset before we get here.
 	 */
-	writel(0x0300, base + BK3710_MISCCTL);
-
-	/* wait for some time and deassert the reset of ATA Device. */
-	mdelay(100);
-
-	/* Deassert the Reset */
-	writel(0x0200, base + BK3710_MISCCTL);
 
 	/*
 	 * Program the IDETIMP Register Value based on the following assumptions
 	 *
 	 * (ATA_IDETIMP_IDEEN		, ENABLE ) |
-	 * (ATA_IDETIMP_SLVTIMEN	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSMPL		, 70NS)    |
-	 * (ATA_IDETIMP_RDYRCVRY	, 50NS)    |
-	 * (ATA_IDETIMP_DMAFTIM1	, PIOCOMP) |
 	 * (ATA_IDETIMP_PREPOST1	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSEN1		, DISABLE) |
-	 * (ATA_IDETIMP_PIOFTIM1	, DISABLE) |
-	 * (ATA_IDETIMP_DMAFTIM0	, PIOCOMP) |
 	 * (ATA_IDETIMP_PREPOST0	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSEN0		, DISABLE) |
-	 * (ATA_IDETIMP_PIOFTIM0	, DISABLE)
-	 */
-	writew(0xB388, base + BK3710_IDETIMP);
-
-	/*
-	 * Configure  SIDETIM  Register
-	 * (ATA_SIDETIM_RDYSMPS1	,120NS ) |
-	 * (ATA_SIDETIM_RDYRCYS1	,120NS )
+	 *
+	 * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+	 * from enabling prefetch/postwrite.
 	 */
-	writeb(0, base + BK3710_SIDETIM);
+	writew(BIT(15), base + BK3710_IDETIMP);
 
 	/*
 	 * UDMACTL Ultra-ATA DMA Control
@@ -281,11 +249,11 @@ static void __devinit palm_bk3710_chipinit(void __iomem *base)
 
 	/*
 	 * MISCCTL Miscellaneous Conrol Register
-	 * (ATA_MISCCTL_RSTMODEP	, 1) |
-	 * (ATA_MISCCTL_RESETP		, 0) |
+	 * (ATA_MISCCTL_HWNHLD1P	, 1 cycle)
+	 * (ATA_MISCCTL_HWNHLD0P	, 1 cycle)
 	 * (ATA_MISCCTL_TIMORIDE	, 1)
 	 */
-	writel(0x201, base + BK3710_MISCCTL);
+	writel(0x001, base + BK3710_MISCCTL);
 
 	/*
 	 * IORDYTMP IORDY Timer for Primary Register
@@ -355,10 +323,9 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 
 	clk_enable(clk);
 	rate = clk_get_rate(clk);
-	ideclk_period = 1000000000UL / rate;
 
-	/* Register the IDE interface with Linux ATA Interface */
-	memset(&hw, 0, sizeof(hw));
+	/* NOTE:  round *down* to meet minimum timings; we count in clocks */
+	ideclk_period = 1000000000UL / rate;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (mem == NULL) {
@@ -388,6 +355,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 	/* Configure the Palm Chip controller */
 	palm_bk3710_chipinit(base);
 
+	memset(&hw, 0, sizeof(hw));
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
 		hw.io_ports_array[i] = (unsigned long)
 				(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
@@ -400,6 +368,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev)
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
 							     ATA_UDMA5;
 
+	/* Register the IDE interface with Linux */
 	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
 	if (rc)
 		goto out;
-- 
GitLab


From d7f5143522d938ea7c4f117c6fa6b1d3fa5af994 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 23 Apr 2009 22:53:45 +0200
Subject: [PATCH 0759/1421] palm_bk3710: palm_bk3710_udmatimings[] CodingStyle
 fixup

Remove superfluous commas and add missing whitespaces.

Noticed-by: Joe Perches <joe@perches.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/palm_bk3710.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index 13a5449aabf..09d813d313f 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -66,12 +66,12 @@ struct palm_bk3710_udmatiming {
 };
 
 static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
-	{160, 240 / 2,},	/* UDMA Mode 0 */
-	{125, 160 / 2,},	/* UDMA Mode 1 */
-	{100, 120 / 2,},	/* UDMA Mode 2 */
-	{100, 90 / 2,},		/* UDMA Mode 3 */
-	{100, 60 / 2,},		/* UDMA Mode 4 */
-	{85,  40 / 2,},		/* UDMA Mode 5 */
+	{ 160, 240 / 2 },	/* UDMA Mode 0 */
+	{ 125, 160 / 2 },	/* UDMA Mode 1 */
+	{ 100, 120 / 2 },	/* UDMA Mode 2 */
+	{ 100,  90 / 2 },	/* UDMA Mode 3 */
+	{ 100,  60 / 2 },	/* UDMA Mode 4 */
+	{  85,  40 / 2 },	/* UDMA Mode 5 */
 };
 
 static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
-- 
GitLab


From b930f964cfe65941c6b1ba61efedfe49da3f6353 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 23 Apr 2009 22:53:45 +0200
Subject: [PATCH 0760/1421] MAINTAINERS: update IDE entry

By a popular demand quilt tree was replaced by a git one.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0beac8a7f8f..2431b05c871 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2743,7 +2743,7 @@ IDE SUBSYSTEM
 P:	Bartlomiej Zolnierkiewicz
 M:	bzolnier@gmail.com
 L:	linux-ide@vger.kernel.org
-T:	quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
 S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
-- 
GitLab


From 2d93148ab6988cad872e65d694c95e8944e1b626 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 14 Apr 2009 11:31:02 -0400
Subject: [PATCH 0761/1421] USB: serial: fix lifetime and locking problems

This patch (as1229) fixes a few lifetime and locking problems in the
usb-serial driver.  The main symptom is that an invalid kevent is
created when the serial device is unplugged while a connection is
active.

	Ports should be unregistered when device is disconnected,
	not when the parent usb_serial structure is deallocated.

	Each open file should hold a reference to the corresponding
	port structure, and the reference should be released when
	the file is closed.

	serial->disc_mutex should be acquired in serial_open(), to
	resolve the classic race between open and disconnect.

	serial_close() doesn't need to hold both serial->disc_mutex
	and port->mutex at the same time.

	Release the subdriver's module reference only after releasing
	all the other references, in case one of the release routines
	needs to invoke some code in the subdriver module.

	Replace a call to flush_scheduled_work() (which is prone to
	deadlocks) with cancel_work_sync().  Also, add a call to
	cancel_work_sync() in the disconnect routine.

	Reduce the scope of serial->disc_mutex in serial_disconnect().
	The only place it really needs to protect is where the
	"disconnected" flag is set.

This fixes the bug reported in

	http://bugs.freedesktop.org/show_bug.cgi?id=20703

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dan Williams <dcbw@redhat.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Oliver Neukum <oliver@neukum.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/usb-serial.c | 104 +++++++++++++++++++++-----------
 1 file changed, 68 insertions(+), 36 deletions(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2a70563bbee..0a566eea49c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -137,22 +137,10 @@ static void destroy_serial(struct kref *kref)
 
 	dbg("%s - %s", __func__, serial->type->description);
 
-	serial->type->shutdown(serial);
-
 	/* return the minor range that this device had */
 	if (serial->minor != SERIAL_TTY_NO_MINOR)
 		return_serial(serial);
 
-	for (i = 0; i < serial->num_ports; ++i)
-		serial->port[i]->port.count = 0;
-
-	/* the ports are cleaned up and released in port_release() */
-	for (i = 0; i < serial->num_ports; ++i)
-		if (serial->port[i]->dev.parent != NULL) {
-			device_unregister(&serial->port[i]->dev);
-			serial->port[i] = NULL;
-		}
-
 	/* If this is a "fake" port, we have to clean it up here, as it will
 	 * not get cleaned up in port_release() as it was never registered with
 	 * the driver core */
@@ -187,7 +175,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
 	unsigned int portNumber;
-	int retval;
+	int retval = 0;
 
 	dbg("%s", __func__);
 
@@ -198,21 +186,24 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 		return -ENODEV;
 	}
 
+	mutex_lock(&serial->disc_mutex);
 	portNumber = tty->index - serial->minor;
 	port = serial->port[portNumber];
-	if (!port) {
-		retval = -ENODEV;
-		goto bailout_kref_put;
-	}
-
-	if (port->serial->disconnected) {
+	if (!port || serial->disconnected)
 		retval = -ENODEV;
-		goto bailout_kref_put;
-	}
+	else
+		get_device(&port->dev);
+	/*
+	 * Note: Our locking order requirement does not allow port->mutex
+	 * to be acquired while serial->disc_mutex is held.
+	 */
+	mutex_unlock(&serial->disc_mutex);
+	if (retval)
+		goto bailout_serial_put;
 
 	if (mutex_lock_interruptible(&port->mutex)) {
 		retval = -ERESTARTSYS;
-		goto bailout_kref_put;
+		goto bailout_port_put;
 	}
 
 	++port->port.count;
@@ -232,14 +223,20 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 			goto bailout_mutex_unlock;
 		}
 
-		retval = usb_autopm_get_interface(serial->interface);
+		mutex_lock(&serial->disc_mutex);
+		if (serial->disconnected)
+			retval = -ENODEV;
+		else
+			retval = usb_autopm_get_interface(serial->interface);
 		if (retval)
 			goto bailout_module_put;
+
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		retval = serial->type->open(tty, port, filp);
 		if (retval)
 			goto bailout_interface_put;
+		mutex_unlock(&serial->disc_mutex);
 	}
 
 	mutex_unlock(&port->mutex);
@@ -248,13 +245,16 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
 bailout_module_put:
+	mutex_unlock(&serial->disc_mutex);
 	module_put(serial->type->driver.owner);
 bailout_mutex_unlock:
 	port->port.count = 0;
 	tty->driver_data = NULL;
 	tty_port_tty_set(&port->port, NULL);
 	mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+	put_device(&port->dev);
+bailout_serial_put:
 	usb_serial_put(serial);
 	return retval;
 }
@@ -262,6 +262,9 @@ bailout_kref_put:
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial;
+	struct module *owner;
+	int count;
 
 	if (!port)
 		return;
@@ -269,6 +272,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 	dbg("%s - port %d", __func__, port->number);
 
 	mutex_lock(&port->mutex);
+	serial = port->serial;
+	owner = serial->type->driver.owner;
 
 	if (port->port.count == 0) {
 		mutex_unlock(&port->mutex);
@@ -281,7 +286,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 		 * this before we drop the port count. The call is protected
 		 * by the port mutex
 		 */
-		port->serial->type->close(tty, port, filp);
+		serial->type->close(tty, port, filp);
 
 	if (port->port.count == (port->console ? 2 : 1)) {
 		struct tty_struct *tty = tty_port_tty_get(&port->port);
@@ -295,17 +300,23 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 		}
 	}
 
-	if (port->port.count == 1) {
-		mutex_lock(&port->serial->disc_mutex);
-		if (!port->serial->disconnected)
-			usb_autopm_put_interface(port->serial->interface);
-		mutex_unlock(&port->serial->disc_mutex);
-		module_put(port->serial->type->driver.owner);
-	}
 	--port->port.count;
-
+	count = port->port.count;
 	mutex_unlock(&port->mutex);
-	usb_serial_put(port->serial);
+	put_device(&port->dev);
+
+	/* Mustn't dereference port any more */
+	if (count == 0) {
+		mutex_lock(&serial->disc_mutex);
+		if (!serial->disconnected)
+			usb_autopm_put_interface(serial->interface);
+		mutex_unlock(&serial->disc_mutex);
+	}
+	usb_serial_put(serial);
+
+	/* Mustn't dereference serial any more */
+	if (count == 0)
+		module_put(owner);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -549,7 +560,13 @@ static void kill_traffic(struct usb_serial_port *port)
 
 static void port_free(struct usb_serial_port *port)
 {
+	/*
+	 * Stop all the traffic before cancelling the work, so that
+	 * nobody will restart it by calling usb_serial_port_softint.
+	 */
 	kill_traffic(port);
+	cancel_work_sync(&port->work);
+
 	usb_free_urb(port->read_urb);
 	usb_free_urb(port->write_urb);
 	usb_free_urb(port->interrupt_in_urb);
@@ -558,7 +575,6 @@ static void port_free(struct usb_serial_port *port)
 	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
 	kfree(port->interrupt_out_buffer);
-	flush_scheduled_work();		/* port->work */
 	kfree(port);
 }
 
@@ -1043,6 +1059,12 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	usb_set_intfdata(interface, NULL);
 	/* must set a flag, to signal subdrivers */
 	serial->disconnected = 1;
+	mutex_unlock(&serial->disc_mutex);
+
+	/* Unfortunately, many of the sub-drivers expect the port structures
+	 * to exist when their shutdown method is called, so we have to go
+	 * through this awkward two-step unregistration procedure.
+	 */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
@@ -1052,11 +1074,21 @@ void usb_serial_disconnect(struct usb_interface *interface)
 				tty_kref_put(tty);
 			}
 			kill_traffic(port);
+			cancel_work_sync(&port->work);
+			device_del(&port->dev);
+		}
+	}
+	serial->type->shutdown(serial);
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		if (port) {
+			put_device(&port->dev);
+			serial->port[i] = NULL;
 		}
 	}
+
 	/* let the last holder of this object
 	 * cause it to be cleaned up */
-	mutex_unlock(&serial->disc_mutex);
 	usb_serial_put(serial);
 	dev_info(dev, "device disconnected\n");
 }
-- 
GitLab


From 46c6e93faa85d1362e1d127dc28cf9d0b304a6f1 Mon Sep 17 00:00:00 2001
From: Chuck Short <zulcss@ubuntu.com>
Date: Tue, 14 Apr 2009 20:50:31 +0200
Subject: [PATCH 0762/1421] USB: Unusual Device support for Gold MP3 Player
 Energy

Reported by Alessio Treglia on
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/125250

User was getting the following errors in dmesg:

[ 2158.139386] sd 5:0:0:1: ioctl_internal_command return code = 8000002
[ 2158.139390] : Current: sense key: No Sense
[ 2158.139393] Additional sense: No additional sense information

Adds unusual device support.

modified:   drivers/usb/storage/unusual_devs.h

Signed-off-by: Chuck Short <zulcss@ubuntu.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 96db479d116..fa65a3b0860 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1851,6 +1851,12 @@ UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_CAPACITY_HEURISTICS),
 
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+		"TGE",
+		"Digital MP3 Audio Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
-- 
GitLab


From f23e649bb605523b960434c5e18c8e9ad3f0b5bd Mon Sep 17 00:00:00 2001
From: David Lopo <dlopo@chipidea.mips.com>
Date: Thu, 16 Apr 2009 14:35:24 -0700
Subject: [PATCH 0763/1421] USB: Gadget: MIPS CI13xxx UDC bugfixes

Bug Fix: high speed detection in LPM mode
Bug Fix: max packet size configuration when switching between HS and FS

Signed-off-by: David Lopo <dlopo@chipidea.mips.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/ci13xxx_udc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 22c65960c42..05af8813da5 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -142,7 +142,7 @@ static struct {
 #define CAP_DEVICEADDR      (0x014UL)
 #define CAP_ENDPTLISTADDR   (0x018UL)
 #define CAP_PORTSC          (0x044UL)
-#define CAP_DEVLC           (0x0B4UL)
+#define CAP_DEVLC           (0x084UL)
 #define CAP_USBMODE         (hw_bank.lpm ? 0x0C8UL : 0x068UL)
 #define CAP_ENDPTSETUPSTAT  (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
 #define CAP_ENDPTPRIME      (hw_bank.lpm ? 0x0DCUL : 0x070UL)
@@ -1986,6 +1986,8 @@ static int ep_enable(struct usb_ep *ep,
 	do {
 		dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
+		mEp->qh[mEp->dir].ptr->cap = 0;
+
 		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
 			mEp->qh[mEp->dir].ptr->cap |=  QH_IOS;
 		else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
-- 
GitLab


From 9cceedb8a87f31e341c1bf1bc6c28a13f9632aff Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Fri, 17 Apr 2009 13:52:00 +0300
Subject: [PATCH 0764/1421] USB: musb: Remove my email address from few musb
 related drivers

This email address is going to expire soon and my contribution to musb
is next to zero so remove it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/omap2430.c | 1 -
 drivers/usb/musb/tusb6010.c | 1 -
 drivers/usb/musb/tusb6010.h | 1 -
 3 files changed, 3 deletions(-)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 901dffdf23b..60924ce0849 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -3,7 +3,6 @@
  * Some code has been taken from tusb6010.c
  * Copyrights for that are attributable to:
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This file is part of the Inventra Controller Driver for Linux.
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 9e20fd070d7..4ac1477d356 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -2,7 +2,6 @@
  * TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index ab8c96286ce..35c933a5d99 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -2,7 +2,6 @@
  * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
-- 
GitLab


From 10c966c310da12e1e3f68d717a8e15274fdadf29 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Fri, 17 Apr 2009 15:19:14 +0400
Subject: [PATCH 0765/1421] USB: musb: fix build when !CONFIG_PM

Fix this build error when CONFIG_PM is not set:
drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0112353ec97..4000cf6d1e8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2191,7 +2191,7 @@ static int musb_resume_early(struct platform_device *pdev)
 
 #else
 #define	musb_suspend	NULL
-#define	musb_resume	NULL
+#define	musb_resume_early	NULL
 #endif
 
 static struct platform_driver musb_driver = {
-- 
GitLab


From e9b8cffa923e8eb3fe70ea05d3fcfffc90a71a57 Mon Sep 17 00:00:00 2001
From: Tony Cook <tony-cook@bigpond.com>
Date: Sat, 18 Apr 2009 22:42:18 +0930
Subject: [PATCH 0766/1421] USB: mos7840: add new device id

add USB ids for the mos7840 based ATEN International serial devices.

Contributed by: Phillip Branch


Signed-off-by: Tony Cook <tony-cook@bigpond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/mos7840.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c20e88a91b..567985b7013 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -123,6 +123,11 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ *  - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL		0x0557
+#define ATENINTL_DEVICE_ID_UC2324	0x2011
+
 /* Interrupt Routine Defines    */
 
 #define SERIAL_IIR_RLS      0x06
@@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{}			/* terminating entry */
 };
 
@@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{}			/* terminating entry */
 };
 
-- 
GitLab


From 37768adf9a1d49aeac0db1ba3dc28b3274b7b789 Mon Sep 17 00:00:00 2001
From: Tony Cook <tony-cook@bigpond.com>
Date: Sat, 18 Apr 2009 22:42:18 +0930
Subject: [PATCH 0767/1421] USB: fix mos7840 problem with minor numbers

This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is
initialised results in all the devices being overlaid in memory (minor = 0 for all instances)

Contributed by: Phillip Branch

Signed-off-by: Tony Cook <tony-cook@bigpond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/mos7840.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 567985b7013..499b7b82a0e 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -38,7 +38,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
 #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
 
 /*
@@ -2484,9 +2484,14 @@ static int mos7840_startup(struct usb_serial *serial)
 		mos7840_set_port_private(serial->port[i], mos7840_port);
 		spin_lock_init(&mos7840_port->pool_lock);
 
-		mos7840_port->port_num = ((serial->port[i]->number -
-					   (serial->port[i]->serial->minor)) +
-					  1);
+		/* minor is not initialised until later by
+		 * usb-serial.c:get_free_serial() and cannot therefore be used
+		 * to index device instances */
+		mos7840_port->port_num = i + 1;
+		dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+		dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+		dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+		dbg ("serial->minor = %d", serial->minor);
 
 		if (mos7840_port->port_num == 1) {
 			mos7840_port->SpRegOffset = 0x0;
@@ -2697,13 +2702,16 @@ static void mos7840_shutdown(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-		mos7840_port->zombie = 1;
-		spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
-		usb_kill_urb(mos7840_port->control_urb);
-		kfree(mos7840_port->ctrl_buf);
-		kfree(mos7840_port->dr);
-		kfree(mos7840_port);
+		dbg ("mos7840_port %d = %p", i, mos7840_port);
+		if (mos7840_port) {
+			spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+			mos7840_port->zombie = 1;
+			spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+			usb_kill_urb(mos7840_port->control_urb);
+			kfree(mos7840_port->ctrl_buf);
+			kfree(mos7840_port->dr);
+			kfree(mos7840_port);
+		}
 		mos7840_set_port_private(serial->port[i], NULL);
 	}
 
-- 
GitLab


From c065c60e83c006611caed23d1320450fcd709398 Mon Sep 17 00:00:00 2001
From: Dan Streetman <ddstreet@ieee.org>
Date: Tue, 21 Apr 2009 13:37:12 -0400
Subject: [PATCH 0768/1421] USB: ehci-sched.c: EHCI SITD scheduling bugfix

Without this patch, the driver won't check that the last fully-occupied
uframe for a new split transaction was vacant beforehand.  This can
lead to a situation in which the first 188 bytes of a 192-byte
isochronous transfer are scheduled in the same uframe as an existing
interrupt transfer.  The resulting schedule looks like this:

       uframe 0: 188-byte isoc-OUT SSPLIT, 8-byte int-IN SSPLIT
       uframe 1: 4-byte isoc-OUT SSPLIT

The SSPLITs are intermingled, causing an error in the downstream hub's
TT.

If you are having problems with devices or hub ports resetting, or failed
interrupt transfers, when you start using a USB audio or video (Isochronous)
device, this patch may help.


Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Kung James <kong1191@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
---
 drivers/usb/host/ehci-sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index ada5d2ba297..556d0ec0c1f 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -323,7 +323,7 @@ static int tt_available (
 		 * already scheduled transactions
 		 */
 		if (125 < usecs) {
-			int ufs = (usecs / 125) - 1;
+			int ufs = (usecs / 125);
 			int i;
 			for (i = uframe; i < (uframe + ufs) && i < 8; i++)
 				if (0 < tt_usecs[i]) {
-- 
GitLab


From 82a10a81c853be3859b3d222db0f372ee8d2eaa2 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 16 Apr 2009 15:37:28 -0400
Subject: [PATCH 0769/1421] USB: g_file_storage: fix use-after-free bug when
 closing files

This patch (as1231) fixes a use-after-free bug in g_file_storage.  A
device's name may not be available after the device is unregistered,
even if the device structure itself is still allocated.  Since
close_backing_file() prints a LUN's name for debugging, it shouldn't
be called after the LUN has been unregistered.

That whole area needed to be cleaned up; the backing files were
getting closed in a couple of different places.  The patch fixes
things so that they get closed in just one place, as part of the
unbind procedure, immediately before the LUN is unregistered.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/file_storage.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 5c030b080d4..381a53b3e11 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -738,7 +738,6 @@ static struct fsg_dev			*the_fsg;
 static struct usb_gadget_driver		fsg_driver;
 
 static void	close_backing_file(struct lun *curlun);
-static void	close_all_backing_files(struct fsg_dev *fsg);
 
 
 /*-------------------------------------------------------------------------*/
@@ -3593,12 +3592,10 @@ static int fsg_main_thread(void *fsg_)
 	fsg->thread_task = NULL;
 	spin_unlock_irq(&fsg->lock);
 
-	/* In case we are exiting because of a signal, unregister the
-	 * gadget driver and close the backing file. */
-	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+	/* If we are exiting because of a signal, unregister the
+	 * gadget driver. */
+	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
 		usb_gadget_unregister_driver(&fsg_driver);
-		close_all_backing_files(fsg);
-	}
 
 	/* Let the unbind and cleanup routines know the thread has exited */
 	complete_and_exit(&fsg->thread_notifier, 0);
@@ -3703,14 +3700,6 @@ static void close_backing_file(struct lun *curlun)
 	}
 }
 
-static void close_all_backing_files(struct fsg_dev *fsg)
-{
-	int	i;
-
-	for (i = 0; i < fsg->nluns; ++i)
-		close_backing_file(&fsg->luns[i]);
-}
-
 
 static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -3845,6 +3834,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 		if (curlun->registered) {
 			device_remove_file(&curlun->dev, &dev_attr_ro);
 			device_remove_file(&curlun->dev, &dev_attr_file);
+			close_backing_file(curlun);
 			device_unregister(&curlun->dev);
 			curlun->registered = 0;
 		}
@@ -4190,7 +4180,6 @@ autoconf_fail:
 out:
 	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
 	fsg_unbind(gadget);
-	close_all_backing_files(fsg);
 	complete(&fsg->thread_notifier);
 	return rc;
 }
@@ -4284,7 +4273,6 @@ static void __exit fsg_cleanup(void)
 	/* Wait for the thread to finish up */
 	wait_for_completion(&fsg->thread_notifier);
 
-	close_all_backing_files(fsg);
 	kref_put(&fsg->ref, fsg_release);
 }
 module_exit(fsg_cleanup);
-- 
GitLab


From a8aa401f38cfb5fa26e970b48e93fb851d68fe64 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Sat, 18 Apr 2009 11:00:39 +0200
Subject: [PATCH 0770/1421] USB: pass mem_flags to dma_alloc_coherent

When I want to use my webcam, I get:

                                 vvvvvvv
cheese: page allocation failure. order:5, mode:0x8004
Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102
Call Trace:
 [<ffffffff802c5d8e>] __alloc_pages_internal+0x3fe/0x520
 [<ffffffff80210a20>] dma_generic_alloc_coherent+0x90/0x120
 [<ffffffffa001c91e>] hcd_buffer_alloc+0xee/0x130 [usbcore]
 [<ffffffffa000d52d>] usb_buffer_alloc+0x2d/0x40 [usbcore]
 [<ffffffffa0160e14>] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo]
 [<ffffffffa0160ff6>] uvc_init_video+0x126/0x400 [uvcvideo]
 [...]

Oddly, I remembered fixing this and putting in __GFP_NOWARN
because uvcvideo retries a smaller allocation. However, the
allocation function doesn't pass the gfp flags through to
dma_alloc_coherent so we still get the warning!

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/buffer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index cadb2dc1d28..3ba2fff7149 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -119,7 +119,7 @@ void *hcd_buffer_alloc(
 		if (size <= pool_max [i])
 			return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
 	}
-	return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
+	return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
 }
 
 void hcd_buffer_free(
-- 
GitLab


From fbfc396efbc11d784b4325adfc02e82a0df01a8d Mon Sep 17 00:00:00 2001
From: "Mark A. Greer" <mgreer@mvista.com>
Date: Tue, 21 Apr 2009 20:52:54 -0700
Subject: [PATCH 0771/1421] USB: musb: Prevent multiple includes of musb.h

Add #ifndef to musb header file to prevent multiple inclusions.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/usb/musb.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index d6aad0ea603..d4375566926 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -7,6 +7,9 @@
  * key configuration differences between boards.
  */
 
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
 /* The USB role is defined by the connector used on the board, so long as
  * standards are being followed.  (Developer boards sometimes won't.)
  */
@@ -101,3 +104,5 @@ extern int __init tusb6010_setup_interface(
 extern int tusb6010_platform_retime(unsigned is_refclk);
 
 #endif	/* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
-- 
GitLab


From 36825a2deca913a11915893b6ecf5e1d817b6e75 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Wed, 15 Apr 2009 22:28:36 +0200
Subject: [PATCH 0772/1421] USB: ci13xxx_udc: fix build error

Fix build error in the MIPS USB IP core family device controller driver.
The driver calls udelay() without including linux/delay.h

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/ci13xxx_udc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 05af8813da5..38e531ecae4 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -51,6 +51,7 @@
  * - Gadget API (majority of optional features)
  * - Suspend & Remote Wakeup
  */
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
-- 
GitLab


From 864e28b4f24106b799e991fa136fa6fa2b638a68 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 16 Apr 2009 13:51:46 -0700
Subject: [PATCH 0773/1421] USB: gadget: omap_udc uses platform_driver_probe()

We now have a more correct solution for shrinking runtime driver
footprints than just marking probe() as __init ... use it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/omap_udc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 57d9641c6bf..a2db0e174f2 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -3104,7 +3104,6 @@ static int omap_udc_resume(struct platform_device *dev)
 /*-------------------------------------------------------------------------*/
 
 static struct platform_driver udc_driver = {
-	.probe		= omap_udc_probe,
 	.remove		= __exit_p(omap_udc_remove),
 	.suspend	= omap_udc_suspend,
 	.resume		= omap_udc_resume,
@@ -3122,7 +3121,7 @@ static int __init udc_init(void)
 #endif
 		"%s\n", driver_desc,
 		use_dma ?  " (dma)" : "");
-	return platform_driver_register(&udc_driver);
+	return platform_driver_probe(&udc_driver, omap_udc_probe);
 }
 module_init(udc_init);
 
-- 
GitLab


From 212b8f0c3f5a2280bfa1d6ab13a6fe98552becaa Mon Sep 17 00:00:00 2001
From: Elina Pasheva <epasheva@sierrawireless.com>
Date: Tue, 21 Apr 2009 17:54:42 -0700
Subject: [PATCH 0774/1421] USB: serial: sierra driver bug fix for composite
 interface

This patch fixes a problem in sierra_send_setup() function when
composite devices are used. One should not be sending ACM commands to
interfaces that are OBEX. Doing this causes an apparent failure as the
ACM command has to time out before the interface can start being used.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d9bf9a5c20e..7da3775a097 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty,
 			val |= 0x02;
 
 		/* If composite device then properly report interface */
-		if (serial->num_ports == 1)
+		if (serial->num_ports == 1) {
 			interface = sierra_calc_interface(serial);
 
+			/* Control message is sent only to interfaces with
+			 * interrupt_in endpoints
+			 */
+			if (port->interrupt_in_urb) {
+				/* send control message */
+				return usb_control_msg(serial->dev,
+					usb_rcvctrlpipe(serial->dev, 0),
+					0x22, 0x21, val, interface,
+					NULL, 0, USB_CTRL_SET_TIMEOUT);
+			}
+		}
+
 		/* Otherwise the need to do non-composite mapping */
 		else {
 			if (port->bulk_out_endpointAddress == 2)
@@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty,
 				interface = 1;
 			else if (port->bulk_out_endpointAddress == 5)
 				interface = 2;
-		}
 
-		return usb_control_msg(serial->dev,
+			return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22, 0x21, val, interface,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+		}
 	}
 
 	return 0;
-- 
GitLab


From 2400a2bfbd0e912193fe3b077f492d4980141813 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Mon, 20 Apr 2009 17:28:53 +0200
Subject: [PATCH 0775/1421] USB: removal of tty->low_latency hack dating back
 to the old serial code

This removes tty->low_latency from all USB serial drivers that push
data into the tty layer at hard interrupt context. It's no longer needed
and actually harmful.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/cyberjack.c        |  7 -------
 drivers/usb/serial/cypress_m8.c       |  4 ----
 drivers/usb/serial/empeg.c            |  6 ------
 drivers/usb/serial/garmin_gps.c       |  8 --------
 drivers/usb/serial/generic.c          |  6 ------
 drivers/usb/serial/io_edgeport.c      |  8 --------
 drivers/usb/serial/io_ti.c            |  8 --------
 drivers/usb/serial/ipaq.c             |  6 ------
 drivers/usb/serial/ipw.c              |  3 ---
 drivers/usb/serial/iuu_phoenix.c      |  1 -
 drivers/usb/serial/kobil_sct.c        |  6 ------
 drivers/usb/serial/mos7720.c          |  7 -------
 drivers/usb/serial/mos7840.c          |  6 ------
 drivers/usb/serial/opticon.c          |  8 --------
 drivers/usb/serial/option.c           |  3 ---
 drivers/usb/serial/sierra.c           |  3 ---
 drivers/usb/serial/ti_usb_3410_5052.c | 14 +-------------
 drivers/usb/serial/visor.c            |  8 --------
 18 files changed, 1 insertion(+), 111 deletions(-)

diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 858bdd038fb..dd501bb63ed 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -175,13 +175,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 	dbg("%s - usb_clear_halt", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through, otherwise it is scheduled, and with high
-	 * data rates (like with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	priv = usb_get_serial_port_data(port);
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->rdtodo = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index eae4740d448..e568710b263 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty,
 	priv->rx_flags = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* setting to zero could cause data loss */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* raise both lines and set termios */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_control = CONTROL_DTR | CONTROL_RTS;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8a69cce40b6..c709ec474a8 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty,
 	termios->c_cflag
 		|= CS8;		/* character size 8 bits */
 
-	/*
-	 * Force low_latency on; otherwise the pushes are scheduled;
-	 * this is bad as it opens up the possibility of dropping bytes
-	 * on the floor.  We don't want to drop bytes on the floor. :)
-	 */
-	tty->low_latency = 1;
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a26a0e2cdb4..586d30ff450 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->mode  = initial_mode;
 	garmin_data_p->count = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 9d57cace373..4cec9906ccf 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces the data
-	   through, otherwise it is scheduled, and with high data rates (like
-	   with OHCI) data can get lost. */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e85c8c0d1ad..fb4a73d090f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = {
 /* local variables */
 static int debug;
 
-static int low_latency = 1;	/* tty low latency flag, on by default */
-
 static atomic_t CmdUrbs;	/* Number of outstanding Command Write Urbs */
 
 
@@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty,
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	/* see if we've set up our endpoint info yet (can't set it up
 	   in edge_startup as the structures were not set up at that time.) */
 	serial = port->serial;
@@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c3cdd00ddc4..513b25e044c 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc {
 #define EDGE_READ_URB_STOPPING	1
 #define EDGE_READ_URB_STOPPED	2
 
-#define EDGE_LOW_LATENCY	1
 #define EDGE_CLOSING_WAIT	4000	/* in .01 sec */
 
 #define EDGE_OUT_BUF_SIZE	1024
@@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber;
 
 static int debug;
 
-static int low_latency = EDGE_LOW_LATENCY;
 static int closing_wait = EDGE_CLOSING_WAIT;
 static int ignore_cpu_rev;
 static int default_uart_mode;		/* RS232 */
@@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty,
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	port_number = port->number - port->serial->minor;
 	switch (port_number) {
 	case 0:
@@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ef92095b073..cd62825a9ac 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty,
 		priv->free_len += PACKET_SIZE;
 	}
 
-	/*
-	 * Force low latency on. This will immediately push data to the line
-	 * discipline instead of queueing.
-	 */
-
 	if (tty) {
-		tty->low_latency = 1;
 		/* FIXME: These two are bogus */
 		tty->raw = 1;
 		tty->real_raw = 1;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index f530032ed93..da2a2b46644 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty,
 	if (!buf_flow_init)
 		return -ENOMEM;
 
-	if (tty)
-		tty->low_latency = 1;
-
 	/* --1: Tell the modem to initialize (we think) From sniffs this is
 	 *	always the first thing that gets sent to the modem during
 	 *	opening of the device */
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 2314c6ae4fc..4473d442b2a 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty,
 		tty->termios->c_oflag = 0;
 		tty->termios->c_iflag = 0;
 		priv->termios_initialized = 1;
-		tty->low_latency = 1;
 		priv->poll = 0;
 	 }
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6286baad939..c148544953b 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty,
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
-
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through, otherwise it is scheduled, and with high
-	 * data rates (like with OHCI) data can get lost.
-	 */
 	if (tty) {
-		tty->low_latency = 1;
 
 		/* Default to echo off and other sane device settings */
 		tty->termios->c_lflag = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e772cc0a97f..24e3b5d4b4d 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty,
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-
-	if (tty)
-		tty->low_latency = 1;
-
 	/* see if we've set up our endpoint info yet   *
 	 * (can't set it up in mos7720_startup as the  *
 	 * structures were not set up at that time.)   */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 499b7b82a0e..84fb1dcd30d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1007,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty,
 	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
 									Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Check to see if we've set up our endpoint info yet    *
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 839583dc8b6..b500ad10b75 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
 	priv->port = port;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Start reading from the device */
 	usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
 			  usb_rcvbulkpipe(priv->udev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 47bd070f24b..7817b82889c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -936,9 +936,6 @@ static int option_open(struct tty_struct *tty,
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	if (tty)
-		tty->low_latency = 1;
-
 	option_send_setup(tty, port);
 
 	return 0;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7da3775a097..913225c6161 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -598,9 +598,6 @@ static int sierra_open(struct tty_struct *tty,
 		}
 	}
 
-	if (tty)
-		tty->low_latency = 1;
-
 	sierra_send_setup(tty, port);
 
 	/* start up the interrupt endpoint if we have one */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9c4c700c7cc..0a64bac306e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -50,11 +50,10 @@
 
 #define TI_TRANSFER_TIMEOUT	2
 
-#define TI_DEFAULT_LOW_LATENCY	0
 #define TI_DEFAULT_CLOSING_WAIT	4000		/* in .01 secs */
 
 /* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS	(ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS	0
 
 /* read urb states */
 #define TI_READ_URB_RUNNING	0
@@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
 
 /* module parameters */
 static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 static unsigned int vendor_3410_count;
@@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
-		"TTY low_latency flag, 0=off, 1=on, default is off");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait,
     "Maximum wait for data to drain in close, in .01 secs, default is 4000");
@@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial)
 		spin_lock_init(&tport->tp_lock);
 		tport->tp_uart_base_addr = (i == 0 ?
 				TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
-		tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
 		tport->tp_closing_wait = closing_wait;
 		init_waitqueue_head(&tport->tp_msr_wait);
 		init_waitqueue_head(&tport->tp_write_wait);
@@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty,
 	if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 		return -ERESTARTSYS;
 
-	if (tty)
-		tty->low_latency =
-				(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
 	port_number = port->number - port->serial->minor;
 
 	memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
@@ -1454,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
 	return 0;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 4facce3d936..5ac414bda71 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
 	priv->throttled = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
 			   usb_rcvbulkpipe(serial->dev,
-- 
GitLab


From 052fbc0d7f76106725c998183d64dcacecd21f8f Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Mon, 20 Apr 2009 17:24:49 +0200
Subject: [PATCH 0776/1421] USB: correct error handling in cdc-wdm

This patch to cdc-wdm

- checks for partial extra descriptors
- fixes a leak in the error case of probe
- checks for an exact number of endpoints
- adds a clarifying comment

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/class/cdc-wdm.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 34e6108e1d4..0fe434505ac 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -3,7 +3,7 @@
  *
  * This driver supports USB CDC WCM Device Management.
  *
- * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2007-2009 Oliver Neukum
  *
  * Some code taken from cdc-acm.c
  *
@@ -610,7 +610,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (!buffer)
 		goto out;
 
-	while (buflen > 0) {
+	while (buflen > 2) {
 		if (buffer [1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
@@ -646,16 +646,18 @@ next_desc:
 	spin_lock_init(&desc->iuspin);
 	init_waitqueue_head(&desc->wait);
 	desc->wMaxCommand = maxcom;
+	/* this will be expanded and needed in hardware endianness */
 	desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
 	desc->intf = intf;
 	INIT_WORK(&desc->rxwork, wdm_rxwork);
 
-	iface = &intf->altsetting[0];
+	rv = -EINVAL;
+	iface = intf->cur_altsetting;
+	if (iface->desc.bNumEndpoints != 1)
+		goto err;
 	ep = &iface->endpoint[0].desc;
-	if (!ep || !usb_endpoint_is_int_in(ep)) {
-		rv = -EINVAL;
+	if (!ep || !usb_endpoint_is_int_in(ep))
 		goto err;
-	}
 
 	desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
 	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
@@ -711,12 +713,19 @@ next_desc:
 
 	usb_set_intfdata(intf, desc);
 	rv = usb_register_dev(intf, &wdm_class);
-	dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
-		 intf->minor - WDM_MINOR_BASE);
 	if (rv < 0)
-		goto err;
+		goto err3;
+	else
+		dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+			intf->minor - WDM_MINOR_BASE);
 out:
 	return rv;
+err3:
+	usb_set_intfdata(intf, NULL);
+	usb_buffer_free(interface_to_usbdev(desc->intf),
+			desc->bMaxPacketSize0,
+			desc->inbuf,
+			desc->response->transfer_dma);
 err2:
 	usb_buffer_free(interface_to_usbdev(desc->intf),
 			desc->wMaxPacketSize,
-- 
GitLab


From ecf85e481a716cfe07406439fdc7ba9526bbfaeb Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Tue, 21 Apr 2009 20:33:10 -0700
Subject: [PATCH 0777/1421] USB: otg: Fix bug on remove path without
 transceiver

In the case where a gadget driver is removed while no
transceiver was found at probe time, a bug in
otg_put_transceiver() will trigger.

Provide symetric calls for otg_get_transceiver() and
otg_put_transceiver(), wherever a transceiver was found or
not.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/otg/otg.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index ff318fae7d4..0a43a7db750 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -43,7 +43,8 @@ EXPORT_SYMBOL(otg_get_transceiver);
  */
 void otg_put_transceiver(struct otg_transceiver *x)
 {
-	put_device(x->dev);
+	if (x)
+		put_device(x->dev);
 }
 EXPORT_SYMBOL(otg_put_transceiver);
 
-- 
GitLab


From 6b35ca0d3d586b8ecb8396821af21186e20afaf0 Mon Sep 17 00:00:00 2001
From: Martin Fuzzey <mfuzzey@gmail.com>
Date: Tue, 21 Apr 2009 21:48:09 +0200
Subject: [PATCH 0778/1421] USB: pwc : do not pass stack allocated buffers to
 USB core.

This is causes problems on platforms that have alignment requirements
for DMA transfers.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/media/video/pwc/pwc-ctrl.c | 238 ++++++++++++++++++++---------
 1 file changed, 164 insertions(+), 74 deletions(-)

diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index f9fbe02e0f6..50b415e07ed 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -159,35 +159,67 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev);
 
 /****************************************************************************/
 
+static int _send_control_msg(struct pwc_device *pdev,
+	u8 request, u16 value, int index, void *buf, int buflen, int timeout)
+{
+	int rc;
+	void *kbuf = NULL;
+
+	if (buflen) {
+		kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+		if (kbuf == NULL)
+			return -ENOMEM;
+		memcpy(kbuf, buf, buflen);
+	}
 
-#define SendControlMsg(request, value, buflen) \
-	usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
-		request, \
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
-		value, \
-		pdev->vcinterface, \
-		&buf, buflen, 500)
+	rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		request,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		index,
+		kbuf, buflen, timeout);
 
-#define RecvControlMsg(request, value, buflen) \
-	usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
-		request, \
-		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
-		value, \
-		pdev->vcinterface, \
-		&buf, buflen, 500)
+	kfree(kbuf);
+	return rc;
+}
 
+static int recv_control_msg(struct pwc_device *pdev,
+	u8 request, u16 value, void *buf, int buflen)
+{
+	int rc;
+	void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+
+	if (kbuf == NULL)
+		return -ENOMEM;
+
+	rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		request,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		pdev->vcinterface,
+		kbuf, buflen, 500);
+	memcpy(buf, kbuf, buflen);
+	kfree(kbuf);
+	return rc;
+}
 
-static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
+static inline int send_video_command(struct pwc_device *pdev,
+	int index, void *buf, int buflen)
 {
-	return usb_control_msg(udev,
-		usb_sndctrlpipe(udev, 0),
+	return _send_control_msg(pdev,
 		SET_EP_STREAM_CTL,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		VIDEO_OUTPUT_CONTROL_FORMATTER,
 		index,
 		buf, buflen, 1000);
 }
 
+static inline int send_control_msg(struct pwc_device *pdev,
+	u8 request, u16 value, void *buf, int buflen)
+{
+	return _send_control_msg(pdev,
+		request, value, pdev->vcinterface, buf, buflen, 500);
+}
+
 
 
 static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
@@ -224,7 +256,7 @@ static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
 		return -EINVAL;
 
 	memcpy(buf, pEntry->mode, 3);
-	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
+	ret = send_video_command(pdev, pdev->vendpoint, buf, 3);
 	if (ret < 0) {
 		PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
 		return ret;
@@ -285,7 +317,7 @@ static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, i
 	memcpy(buf, pChoose->mode, 13);
 	if (snapshot)
 		buf[0] |= 0x80;
-	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
+	ret = send_video_command(pdev, pdev->vendpoint, buf, 13);
 	if (ret < 0)
 		return ret;
 
@@ -358,7 +390,7 @@ static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, i
 		buf[0] |= 0x80;
 
 	/* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
-	ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
+	ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12);
 	if (ret < 0)
 		return ret;
 
@@ -530,7 +562,8 @@ int pwc_get_brightness(struct pwc_device *pdev)
 	char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return buf;
@@ -545,7 +578,8 @@ int pwc_set_brightness(struct pwc_device *pdev, int value)
 	if (value > 0xffff)
 		value = 0xffff;
 	buf = (value >> 9) & 0x7f;
-	return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
 }
 
 /* CONTRAST */
@@ -555,7 +589,8 @@ int pwc_get_contrast(struct pwc_device *pdev)
 	char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return buf;
@@ -570,7 +605,8 @@ int pwc_set_contrast(struct pwc_device *pdev, int value)
 	if (value > 0xffff)
 		value = 0xffff;
 	buf = (value >> 10) & 0x3f;
-	return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
 }
 
 /* GAMMA */
@@ -580,7 +616,8 @@ int pwc_get_gamma(struct pwc_device *pdev)
 	char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return buf;
@@ -595,7 +632,8 @@ int pwc_set_gamma(struct pwc_device *pdev, int value)
 	if (value > 0xffff)
 		value = 0xffff;
 	buf = (value >> 11) & 0x1f;
-	return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
 }
 
 
@@ -613,7 +651,8 @@ int pwc_get_saturation(struct pwc_device *pdev, int *value)
 		saturation_register = SATURATION_MODE_FORMATTER2;
 	else
 		saturation_register = SATURATION_MODE_FORMATTER1;
-	ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = (signed)buf;
@@ -636,7 +675,8 @@ int pwc_set_saturation(struct pwc_device *pdev, int value)
 		saturation_register = SATURATION_MODE_FORMATTER2;
 	else
 		saturation_register = SATURATION_MODE_FORMATTER1;
-	return SendControlMsg(SET_CHROM_CTL, saturation_register, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
 }
 
 /* AGC */
@@ -651,7 +691,8 @@ int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
 	else
 		buf = 0xff; /* fixed */
 
-	ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (!mode && ret >= 0) {
 		if (value < 0)
@@ -659,7 +700,8 @@ int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
 		if (value > 0xffff)
 			value = 0xffff;
 		buf = (value >> 10) & 0x3F;
-		ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+		ret = send_control_msg(pdev,
+			SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
 	}
 	if (ret < 0)
 		return ret;
@@ -671,12 +713,14 @@ int pwc_get_agc(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
 	if (buf != 0) { /* fixed */
-		ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+		ret = recv_control_msg(pdev,
+			GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
 		if (ret < 0)
 			return ret;
 		if (buf > 0x3F)
@@ -684,7 +728,8 @@ int pwc_get_agc(struct pwc_device *pdev, int *value)
 		*value = (buf << 10);
 	}
 	else { /* auto */
-		ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
+		ret = recv_control_msg(pdev,
+			GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
 		if (ret < 0)
 			return ret;
 		/* Gah... this value ranges from 0x00 ... 0x9F */
@@ -707,7 +752,8 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
 	else
 		buf[0] = 0xff; /* fixed */
 
-	ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (!mode && ret >= 0) {
 		if (value < 0)
@@ -726,7 +772,9 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
 			buf[0] = value >> 8;
 		}
 
-		ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
+		ret = send_control_msg(pdev,
+			SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
+			&buf, sizeof(buf));
 	}
 	return ret;
 }
@@ -737,7 +785,8 @@ int pwc_get_shutter_speed(struct pwc_device *pdev, int *value)
 	unsigned char buf[2];
 	int ret;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf[0] + (buf[1] << 8);
@@ -764,7 +813,9 @@ int pwc_camera_power(struct pwc_device *pdev, int power)
 		buf = 0x00; /* active */
 	else
 		buf = 0xFF; /* power save */
-	return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 
@@ -773,20 +824,20 @@ int pwc_camera_power(struct pwc_device *pdev, int power)
 
 int pwc_restore_user(struct pwc_device *pdev)
 {
-	char buf; /* dummy */
-	return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
 }
 
 int pwc_save_user(struct pwc_device *pdev)
 {
-	char buf; /* dummy */
-	return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
 }
 
 int pwc_restore_factory(struct pwc_device *pdev)
 {
-	char buf; /* dummy */
-	return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
 }
 
  /* ************************************************* */
@@ -814,7 +865,8 @@ int pwc_set_awb(struct pwc_device *pdev, int mode)
 
 	buf = mode & 0x07; /* just the lowest three bits */
 
-	ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (ret < 0)
 		return ret;
@@ -826,7 +878,8 @@ int pwc_get_awb(struct pwc_device *pdev)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (ret < 0)
 		return ret;
@@ -843,7 +896,9 @@ int pwc_set_red_gain(struct pwc_device *pdev, int value)
 		value = 0xffff;
 	/* only the msb is considered */
 	buf = value >> 8;
-	return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_red_gain(struct pwc_device *pdev, int *value)
@@ -851,7 +906,9 @@ int pwc_get_red_gain(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 	    return ret;
 	*value = buf << 8;
@@ -869,7 +926,9 @@ int pwc_set_blue_gain(struct pwc_device *pdev, int value)
 		value = 0xffff;
 	/* only the msb is considered */
 	buf = value >> 8;
-	return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
@@ -877,7 +936,9 @@ int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 	    return ret;
 	*value = buf << 8;
@@ -894,7 +955,8 @@ static int pwc_read_red_gain(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf << 8;
@@ -906,7 +968,8 @@ static int pwc_read_blue_gain(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf << 8;
@@ -920,7 +983,8 @@ static int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
 
 	/* useful range is 0x01..0x20 */
 	buf = speed / 0x7f0;
-	return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
 }
 
 static int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
@@ -928,7 +992,8 @@ static int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf * 0x7f0;
@@ -942,7 +1007,8 @@ static int pwc_set_wb_delay(struct pwc_device *pdev, int delay)
 
 	/* useful range is 0x01..0x3F */
 	buf = (delay >> 10);
-	return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
 }
 
 static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
@@ -950,7 +1016,8 @@ static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf << 10;
@@ -978,7 +1045,8 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 	buf[0] = on_value;
 	buf[1] = off_value;
 
-	return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
 }
 
 static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
@@ -992,7 +1060,8 @@ static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
 		return 0;
 	}
 
-	ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*on_value = buf[0] * 100;
@@ -1009,7 +1078,8 @@ int pwc_set_contour(struct pwc_device *pdev, int contour)
 		buf = 0xff; /* auto contour on */
 	else
 		buf = 0x0; /* auto contour off */
-	ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
@@ -1019,7 +1089,8 @@ int pwc_set_contour(struct pwc_device *pdev, int contour)
 		contour = 0xffff;
 
 	buf = (contour >> 10); /* contour preset is [0..3f] */
-	ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return 0;
@@ -1030,13 +1101,16 @@ int pwc_get_contour(struct pwc_device *pdev, int *contour)
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
 	if (buf == 0) {
 		/* auto mode off, query current preset value */
-		ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+		ret = recv_control_msg(pdev,
+			GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
+			&buf, sizeof(buf));
 		if (ret < 0)
 			return ret;
 		*contour = buf << 10;
@@ -1055,7 +1129,9 @@ int pwc_set_backlight(struct pwc_device *pdev, int backlight)
 		buf = 0xff;
 	else
 		buf = 0x0;
-	return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
@@ -1063,7 +1139,9 @@ int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*backlight = !!buf;
@@ -1078,7 +1156,8 @@ int pwc_set_colour_mode(struct pwc_device *pdev, int colour)
 		buf = 0xff;
 	else
 		buf = 0x0;
-	return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
@@ -1086,7 +1165,8 @@ int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*colour = !!buf;
@@ -1102,7 +1182,8 @@ int pwc_set_flicker(struct pwc_device *pdev, int flicker)
 		buf = 0xff;
 	else
 		buf = 0x0;
-	return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
@@ -1110,7 +1191,8 @@ int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*flicker = !!buf;
@@ -1126,7 +1208,9 @@ int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
 	if (noise > 3)
 		noise = 3;
 	buf = noise;
-	return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
@@ -1134,7 +1218,9 @@ int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*noise = buf;
@@ -1146,7 +1232,8 @@ static int _pwc_mpt_reset(struct pwc_device *pdev, int flags)
 	unsigned char buf;
 
 	buf = flags & 0x03; // only lower two bits are currently used
-	return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_mpt_reset(struct pwc_device *pdev, int flags)
@@ -1175,7 +1262,8 @@ static int _pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
 	buf[1] = (pan >> 8) & 0xFF;
 	buf[2] = tilt & 0xFF;
 	buf[3] = (tilt >> 8) & 0xFF;
-	return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
+	return send_control_msg(pdev,
+		SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
@@ -1211,7 +1299,8 @@ static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *st
 	int ret;
 	unsigned char buf[5];
 
-	ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
+	ret = recv_control_msg(pdev,
+		GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	status->status = buf[0] & 0x7; // 3 bits are used for reporting
@@ -1233,7 +1322,8 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 	else
 		request = SENSOR_TYPE_FORMATTER2;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, request, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	if (pdev->type < 675)
-- 
GitLab


From a5a0a630922a2f6a774b6dac19f70cb5abd86bb0 Mon Sep 17 00:00:00 2001
From: Sunil Mushran <sunil.mushran@oracle.com>
Date: Mon, 20 Apr 2009 21:34:18 -0700
Subject: [PATCH 0779/1421] ocfs2: Add missing iput() during error handling in
 ocfs2_dentry_attach_lock()

In ocfs2_dentry_attach_lock(), if unable to get the dentry lock, we need to
call iput(inode) because a failure here means no d_instantiate(), which means
the normally matching iput() will not be called during dput(dentry).

This patch fixes the oops that accompanies the following message:
(3996,1):dlm_empty_lockres:2708 ERROR: lockres W00000000000000000a1046b06a4382 still has local locks!
kernel BUG in dlm_empty_lockres at /rpmbuild/smushran/BUILD/ocfs2-1.4.2/fs/ocfs2/dlm/dlmmaster.c:2709!

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/dcache.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index 7d604480557..b574431a031 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -290,6 +290,21 @@ out_attach:
 	else
 		mlog_errno(ret);
 
+	/*
+	 * In case of error, manually free the allocation and do the iput().
+	 * We need to do this because error here means no d_instantiate(),
+	 * which means iput() will not be called during dput(dentry).
+	 */
+	if (ret < 0 && !alias) {
+		ocfs2_lock_res_free(&dl->dl_lockres);
+		BUG_ON(dl->dl_count != 1);
+		spin_lock(&dentry_attach_lock);
+		dentry->d_fsdata = NULL;
+		spin_unlock(&dentry_attach_lock);
+		kfree(dl);
+		iput(inode);
+	}
+
 	dput(alias);
 
 	return ret;
-- 
GitLab


From ae1036a2f4e8f83b544ddce4f875a1e4e2ac7b62 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Mon, 20 Apr 2009 17:48:28 +0100
Subject: [PATCH 0780/1421] [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we
 do have Scoop config

Check if we really have Scoop config, otherwice we can get a nice Oops
during probe.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/pcmcia/pxa2xx_sharpsl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 1cd02f5a23a..bc43f78f6f0 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -255,6 +255,9 @@ static int __init sharpsl_pcmcia_init(void)
 {
 	int ret;
 
+	if (!platform_scoop_config)
+		return -ENODEV;
+
 	sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
 	sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 
-- 
GitLab


From fdd8b079e33d4711527ace19798e9db99a056469 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Wed, 22 Apr 2009 20:08:17 +0100
Subject: [PATCH 0781/1421] [ARM] 5460/1: Orion: reduce namespace pollution

Symbols like SOFT_RESET are way too generic to be exported at large.
To avoid this, let's move the mbus bridge register defines into a
separate file and include it where needed.  This affects mach-kirkwood,
mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all
share code in plat-orion which relies on those defines.

Some other defines have been moved to narrower scopes, or simply deleted
when they had no user.

This fixes compilation problem with mpt2sas on the above listed
platforms.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-kirkwood/common.c               |  1 +
 .../mach-kirkwood/include/mach/bridge-regs.h  | 42 ++++++++++++
 .../mach-kirkwood/include/mach/debug-macro.S  |  2 +-
 .../mach-kirkwood/include/mach/entry-macro.S  |  2 +-
 .../arm/mach-kirkwood/include/mach/kirkwood.h | 53 ++++-----------
 arch/arm/mach-kirkwood/include/mach/system.h  |  3 +-
 arch/arm/mach-kirkwood/irq.c                  |  1 +
 arch/arm/mach-loki/addr-map.c                 |  1 +
 arch/arm/mach-loki/include/mach/bridge-regs.h | 33 +++++++++
 arch/arm/mach-loki/include/mach/entry-macro.S |  2 +-
 arch/arm/mach-loki/include/mach/loki.h        | 14 ----
 arch/arm/mach-loki/include/mach/system.h      |  3 +-
 arch/arm/mach-loki/irq.c                      |  1 +
 arch/arm/mach-mv78xx0/common.c                |  1 +
 .../mach-mv78xx0/include/mach/bridge-regs.h   | 39 +++++++++++
 .../mach-mv78xx0/include/mach/entry-macro.S   |  2 +-
 arch/arm/mach-mv78xx0/include/mach/mv78xx0.h  | 42 +++---------
 arch/arm/mach-mv78xx0/include/mach/system.h   |  3 +-
 arch/arm/mach-mv78xx0/irq.c                   |  2 +-
 arch/arm/mach-orion5x/addr-map.c              |  2 +
 .../mach-orion5x/include/mach/bridge-regs.h   | 41 +++++++++++
 .../mach-orion5x/include/mach/entry-macro.S   |  2 +-
 arch/arm/mach-orion5x/include/mach/orion5x.h  | 68 ++++++-------------
 arch/arm/mach-orion5x/include/mach/system.h   |  3 +-
 arch/arm/mach-orion5x/irq.c                   |  2 +-
 arch/arm/mach-orion5x/mss2-setup.c            |  1 +
 arch/arm/mach-orion5x/pci.c                   |  1 +
 arch/arm/plat-orion/time.c                    |  2 +-
 drivers/watchdog/orion5x_wdt.c                |  1 +
 29 files changed, 223 insertions(+), 147 deletions(-)
 create mode 100644 arch/arm/mach-kirkwood/include/mach/bridge-regs.h
 create mode 100644 arch/arm/mach-loki/include/mach/bridge-regs.h
 create mode 100644 arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
 create mode 100644 arch/arm/mach-orion5x/include/mach/bridge-regs.h

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 16dc9ea0839..eeb00240d78 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -23,6 +23,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
new file mode 100644
index 00000000000..4f7029f521c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET		0x00000002
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH		0x00000010
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index c0cc5b5c82a..a4a55c199d7 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
index 83e0cba77b3..8939d36f893 100644
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 38c98685359..b3e13958821 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -43,44 +43,6 @@
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   CPU_RESET		0x00000002
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0000
-#define   IRQ_MASK_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define   L2_WRITETHROUGH	0x00000010
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID	0x6281
-#define MV88F6281_REV_Z0	0
-#define MV88F6281_REV_A0	2
-
-#define MV88F6192_DEV_ID	0x6192
-#define MV88F6192_REV_Z0	0
-#define MV88F6192_REV_A0	2
-
-#define MV88F6180_DEV_ID	0x6180
-#define MV88F6180_REV_A0	2
-
 /*
  * Register Map
  */
@@ -99,6 +61,8 @@
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
@@ -119,5 +83,18 @@
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID	0x6281
+#define MV88F6281_REV_Z0	0
+#define MV88F6281_REV_A0	2
+
+#define MV88F6192_DEV_ID	0x6192
+#define MV88F6192_REV_Z0	0
+#define MV88F6192_REV_A0	2
+
+#define MV88F6180_DEV_ID	0x6180
+#define MV88F6180_REV_A0	2
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 23a1914c1da..7568e95d279 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 06083b23bb4..28020abf49e 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include <asm/gpio.h>
 #include "common.h"
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index 0332d8f5c18..b9537c97beb 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -38,6 +38,7 @@
 /*
  * CPU Address Decode Windows registers
  */
+#define BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
 #define CPU_WIN_CTRL(n)		BRIDGE_REG(0x000 | ((n) << 4))
 #define CPU_WIN_BASE(n)		BRIDGE_REG(0x004 | ((n) << 4))
 #define CPU_WIN_REMAP_LO(n)	BRIDGE_REG(0x008 | ((n) << 4))
diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h
new file mode 100644
index 00000000000..a3fabf70044
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/bridge-regs.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-loki/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/loki.h>
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	0x0004
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF		0x0000
+#define IRQ_MASK_OFF		0x0004
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
index 332af38ec13..bc917ed3a62 100644
--- a/arch/arm/mach-loki/include/mach/entry-macro.S
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
index c00af6ba557..bfca7c265f4 100644
--- a/arch/arm/mach-loki/include/mach/loki.h
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -58,20 +58,6 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	0x0004
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_OFF		0x0000
-#define   IRQ_MASK_OFF		0x0004
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
 
 #define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
 
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
index c1de36fe9b3..71895199a53 100644
--- a/arch/arm/mach-loki/include/mach/system.h
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index e1f97338d5b..76b211bfcca 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a575daaa62d..9ba595083da 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -20,6 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/orion_nand.h>
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
new file mode 100644
index 00000000000..2d14c4fe294
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/mv78xx0.h>
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH		0x00020000
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF	0x0000
+#define IRQ_CAUSE_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0008
+#define IRQ_MASK_ERR_OFF	0x000c
+#define IRQ_MASK_LOW_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index fbfb2693ce6..66ae2d29e77 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 582cffc733a..d715b92b090 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -59,37 +59,6 @@
  * Core-specific peripheral registers.
  */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   L2_WRITETHROUGH	0x00020000
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_ERR_OFF	0x0000
-#define   IRQ_CAUSE_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0008
-#define   IRQ_MASK_ERR_OFF	0x000c
-#define   IRQ_MASK_LOW_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID	0x6381
-#define MV78X00_REV_Z0		1
-
-#define MV78100_DEV_ID		0x7810
-#define MV78100_REV_A0		1
-
-#define MV78200_DEV_ID		0x7820
-#define MV78200_REV_A0		1
 
 /*
  * Register Map
@@ -135,5 +104,16 @@
 
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID	0x6381
+#define MV78X00_REV_Z0		1
+
+#define MV78100_DEV_ID		0x7810
+#define MV78100_REV_A0		1
+
+#define MV78200_DEV_ID		0x7820
+#define MV78200_REV_A0		1
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 1d6350b22d0..66e7ce4e90b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 30b7e4bcdbc..f289b0ea7dc 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -13,7 +13,7 @@
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <asm/gpio.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 719957e05d9..c14d1213727 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -57,12 +57,14 @@
 /*
  * Helpers to get DDR bank info
  */
+#define ORION5X_DDR_REG(x)	(ORION5X_DDR_VIRT_BASE | (x))
 #define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) << 3))
 #define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) << 3))
 
 /*
  * CPU Address Decode Windows registers
  */
+#define ORION5X_BRIDGE_REG(x)	(ORION5X_BRIDGE_VIRT_BASE | (x))
 #define CPU_WIN_CTRL(n)		ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
 #define CPU_WIN_BASE(n)		ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
 #define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
new file mode 100644
index 00000000000..be896e59d3e
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/bridge-regs.h
+ *
+ * Orion CPU Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/orion5x.h>
+
+#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE | 0x100)
+
+#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
+
+#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET		0x0002
+
+#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+
+#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define WDT_INT_REQ		0x0008
+
+#define BRIDGE_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
+
+#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
+
+#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index 4351937035c..d658992e540 100644
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 67bda31406d..377a773ae53 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -60,31 +60,11 @@
 #define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
 #define ORION5X_PCI_MEM_SIZE		SZ_128M
 
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID	0x5181
-#define MV88F5181_REV_B1	3
-#define MV88F5181L_REV_A0	8
-#define MV88F5181L_REV_A1	9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID	0x5182
-#define MV88F5182_REV_A2	2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID	0x5281
-#define MV88F5281_REV_D0	4
-#define MV88F5281_REV_D1	5
-#define MV88F5281_REV_D2	6
-/* Orion-1-90 (88F6183) */
-#define MV88F6183_DEV_ID	0x6183
-#define MV88F6183_REV_B0	3
-
 /*******************************************************************************
  * Orion Registers Map
  ******************************************************************************/
+
 #define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
 
 #define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
 #define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
@@ -97,34 +77,25 @@
 #define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
 
 #define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
-#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
 
 #define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
 
 #define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
 
 #define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
 #define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
 
 #define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
 #define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
-#define ORION5X_XOR_REG(x)		(ORION5X_XOR_VIRT_BASE | (x))
 
 #define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
 #define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
 
 #define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
 #define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
 
 #define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
 #define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
 
 /*******************************************************************************
  * Device Bus Registers
@@ -142,23 +113,24 @@
 #define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
 #define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
 
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
-#define  WDT_RESET		0x0002
-#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
-#define  WDT_INT_REQ		0x0008
-#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
-#define  BRIDGE_INT_TIMER0	0x0002
-#define  BRIDGE_INT_TIMER1	0x0004
-#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
-
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID	0x5181
+#define MV88F5181_REV_B1	3
+#define MV88F5181L_REV_A0	8
+#define MV88F5181L_REV_A1	9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID	0x5182
+#define MV88F5182_REV_A2	2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D0	4
+#define MV88F5281_REV_D1	5
+#define MV88F5281_REV_D2	6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID	0x6183
+#define MV88F6183_REV_B0	3
 
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 9b8db1dcfa8..e912490fff2 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -11,8 +11,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e03f7b45cb0..d7512b925a8 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/gpio.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 68acca98e63..41e6d5033d5 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -26,6 +26,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index d0a785a3b88..36dc5413cc9 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * PCI controller
  ****************************************************************************/
+#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE | (x))
 #define PCI_MODE		ORION5X_PCI_REG(0xd00)
 #define PCI_CMD			ORION5X_PCI_REG(0xc00)
 #define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 6fa2923e6dc..bdeb166b4b2 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
 
 /*
  * Number of timer ticks per jiffy.
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 7529616739d..2cde568e4fb 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -22,6 +22,7 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <mach/bridge-regs.h>
 #include <plat/orion5x_wdt.h>
 
 /*
-- 
GitLab


From f461ddea0af8b98e2b7940eba9c693b0ee44d64a Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 23 Apr 2009 18:59:43 -0400
Subject: [PATCH 0782/1421] ACPI/hpet: prevent boot hang when hpet=force used
 on ICH-4M

Linux tells ICH4 users that they can (manually) invoke
"hpet=force" to enable the undocumented ICH-4M HPET.
The HPET becomes available for both clocksource and clockevents.

But as of ff69f2bba67bd45514923aaedbf40fe351787c59
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
the HPET may be used via clocksource for idle accounting, and
hpet=force on an ICH4 box hangs boot.

It turns out that touching the MMIO HPET withing
the ARB_DIS part of C3 will hang the hardware.

The fix is to simply move the timer access outside
the ARB_DIS region.  This is a no-op on modern hardware
because ARB_DIS is no longer used.

http://bugzilla.kernel.org/show_bug.cgi?id=13087

Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6fe121434ff..ea23c64bd76 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -955,6 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	 */
 	acpi_state_timer_broadcast(pr, cx, 1);
 
+	kt1 = ktime_get_real();
 	/*
 	 * disable bus master
 	 * bm_check implies we need ARB_DIS
@@ -976,10 +977,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		ACPI_FLUSH_CPU_CACHE();
 	}
 
-	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
-	kt2 = ktime_get_real();
-	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
 	/* Re-enable bus master arbitration */
 	if (pr->flags.bm_check && pr->flags.bm_control) {
@@ -988,6 +986,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		c3_cpu_count--;
 		spin_unlock(&c3_lock);
 	}
+	kt2 = ktime_get_real();
+	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
 	/* TSC could halt in idle, so notify users */
-- 
GitLab


From b75d17285b9de74a0f19e64e1389efcc6626d3fc Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Thu, 23 Apr 2009 19:25:51 -0700
Subject: [PATCH 0783/1421] Input: ALPS - add signature for Toshiba Satellite
 Pro M10

This toshiba has a touchpad with trackpoint and 2 sets of left
and right buttons (above and below touchpad).

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index cbedf957cc5..daecc75c72e 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -37,6 +37,7 @@
 #define ALPS_FW_BK_2	0x40
 
 static const struct alps_model_info alps_model_data[] = {
+	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
 	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		/* UMAX-530T */
 	{ { 0x53, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-- 
GitLab


From 15ca78f7925899fee7bc265651a69ab51f449eea Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 23 Apr 2009 21:11:06 -0600
Subject: [PATCH 0784/1421] OMAP2xxx clock: fix broken cpu_mask code

Commit 8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 breaks the OMAP2xxx
cpu_mask code, which causes OMAP2xxx to panic on boot.  Fix by
removing the cpu_mask auto variable and by changing CK_242X
and CK_243X to use RATE_IN_242X/RATE_IN_243X.

Resolves

<1>Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<1>pgd = c0004000
<1>[0000000c] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.29-omap1 #32)
PC is at omap2_clk_set_parent+0x104/0x120
LR is at omap2_clk_set_parent+0x28/0x120

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 984fb86349b..5ea418327e8 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -60,8 +60,8 @@ struct omap_clk {
 		},			\
 	}
 
-#define CK_243X	(1 << 0)
-#define CK_242X	(1 << 1)
+#define CK_243X			RATE_IN_243X
+#define CK_242X			RATE_IN_242X
 
 static struct omap_clk omap24xx_clks[] = {
 	/* external root sources */
@@ -711,7 +711,7 @@ int __init omap2_clk_init(void)
 {
 	struct prcm_config *prcm;
 	struct omap_clk *c;
-	u32 clkrate, cpu_mask;
+	u32 clkrate;
 
 	if (cpu_is_omap242x())
 		cpu_mask = RATE_IN_242X;
@@ -728,12 +728,6 @@ int __init omap2_clk_init(void)
 	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
 	propagate_rate(&sys_ck);
 
-	cpu_mask = 0;
-	if (cpu_is_omap2420())
-		cpu_mask |= CK_242X;
-	if (cpu_is_omap2430())
-		cpu_mask |= CK_243X;
-
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
 		if (c->cpu & cpu_mask) {
 			clkdev_add(&c->lk);
-- 
GitLab


From 9e53dd7180a1fd59a785dbfb9c633f01c96c388f Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Thu, 23 Apr 2009 21:11:07 -0600
Subject: [PATCH 0785/1421] OMAP3: clock: Camera module doesn't have IDLEST bit

This patch avoids waiting for the camera module to become ready,
since it doesn't have IDLEST bit.

Based on a earlier hack done by Paul Walmsley on Sep 9 2008 on
linux-omap tree.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 70ec10deb65..f0090175d59 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2052,7 +2052,7 @@ static struct clk dss_ick = {
 
 static struct clk cam_mclk = {
 	.name		= "cam_mclk",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m5x2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
@@ -2063,7 +2063,7 @@ static struct clk cam_mclk = {
 static struct clk cam_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "cam_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
@@ -2074,7 +2074,7 @@ static struct clk cam_ick = {
 
 static struct clk csi2_96m_fck = {
 	.name		= "csi2_96m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_96m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-- 
GitLab


From d53eb73795c55101453ea6ca4f486ea2ff7b0496 Mon Sep 17 00:00:00 2001
From: Arun KS <arunks@mistralsolutions.com>
Date: Thu, 23 Apr 2009 21:11:07 -0600
Subject: [PATCH 0786/1421] OMAP1: clock: Typo fix for clock in omap1

Typo error when requesting for clock for dsp in omap1

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap1/mcbsp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index d040c3f1027..a2d7814896b 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id)
 	 */
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
 		if (dsp_use++ == 0) {
-			api_clk = clk_get(NULL, "api_clk");
-			dsp_clk = clk_get(NULL, "dsp_clk");
+			api_clk = clk_get(NULL, "api_ck");
+			dsp_clk = clk_get(NULL, "dsp_ck");
 			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
 				clk_enable(api_clk);
 				clk_enable(dsp_clk);
-- 
GitLab


From 9198a40620fc69d577e854fb571e76af3313bc53 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 23 Apr 2009 21:11:08 -0600
Subject: [PATCH 0787/1421] OMAP3 GPTIMER: fix GPTIMER12 IRQ

GPTIMER12 IRQ is at IRQ 95 on OMAP3, unlike OMAP2.  (ref: OMAP34xx
Multimedia High Security (HS) Device Silicon Revision 3.0 Security
Addendum Rev. B, SWPU119B)

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dmtimer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index bfd47570cc9..c99d611242a 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
 	{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
 	{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
-	{ .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 },
+	{ .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
 };
 
 static const char *omap3_dm_source_names[] __initdata = {
-- 
GitLab


From 219c5b98d5eb86c75abc716087f494fe06c6b64e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 23 Apr 2009 21:11:08 -0600
Subject: [PATCH 0788/1421] OMAP: dmtimer: enable all timers to be wakeup
 events

All GP timers on OMAP2/3 can generate wakeup events.  The wakeup status is
cleared in the PRCM interrupt handler.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/dmtimer.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index c99d611242a..a05205c12f7 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
 	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
 
 	/*
-	 * Enable wake-up only for GPT1 on OMAP2 CPUs.
-	 * FIXME: All timers should have wake-up enabled and clear
-	 * PRCM status.
+	 * Enable wake-up on OMAP2 CPUs.
 	 */
-	if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
+	if (cpu_class_is_omap2())
 		l |= 1 << 2;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
 
-- 
GitLab


From f248076c0dad45b7e50f27096e1aac6a617665db Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 23 Apr 2009 21:11:10 -0600
Subject: [PATCH 0789/1421] OMAP2/3 GPTIMER: allow system tick GPTIMER to be
 changed in board-*.c files

Add a function omap2_gp_clockevent_set_gptimer() for board-*.c files
to use in .init_irq functions to configure the system tick GPTIMER.
Practical choices at this point are GPTIMER1 or GPTIMER12.  Both of
these timers are in the WKUP powerdomain, and so are unaffected by
chip power management.  GPTIMER1 can use sys_clk as a source, for
applications where a high-resolution timer is more important than
power management.  GPTIMER12 has the special property that it has the
secure 32kHz oscillator as its source clock, which may be less prone
to glitches than the off-chip 32kHz oscillator.  But on HS devices, it
may not be available for Linux use.

It appears that most boards are fine with GPTIMER1, but BeagleBoard
should use GPTIMER12 when using a 32KiHz timer source, due to hardware bugs
in revisions B4 and below.  Modify board-omap3beagle.c to use GPTIMER12.

This patch originally used a Kbuild config option to select the GPTIMER,
but was changed to allow this to be specified in board-*.c files, per
Tony's request.

Kalle Vallo <kalle.valo@nokia.com> found a bug in an earlier version of
this patch - thanks Kalle.

Tested on Beagle rev B4 ES2.1, with and without CONFIG_OMAP_32K_TIMER, and
3430SDP.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Kalle Valo <kalle.valo@nokia.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c    |  4 ++
 arch/arm/mach-omap2/clock24xx.c            |  1 +
 arch/arm/mach-omap2/clock24xx.h            | 10 ++++-
 arch/arm/mach-omap2/clock34xx.h            |  1 -
 arch/arm/mach-omap2/timer-gp.c             | 48 ++++++++++++++++++++--
 arch/arm/plat-omap/dmtimer.c               | 20 ++++++---
 arch/arm/plat-omap/include/mach/dmtimer.h  |  2 +-
 arch/arm/plat-omap/include/mach/timer-gp.h | 17 ++++++++
 8 files changed, 91 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/plat-omap/include/mach/timer-gp.h

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 744740ae1b9..3a7a29d1f9a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,6 +42,7 @@
 #include <mach/nand.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
+#include <mach/timer-gp.h>
 
 #include "mmc-twl4030.h"
 
@@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
 	omap_gpio_init();
 }
 
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 5ea418327e8..efc59c49341 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -66,6 +66,7 @@ struct omap_clk {
 static struct omap_clk omap24xx_clks[] = {
 	/* external root sources */
 	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 33c3e5b1432..88c5acb40fc 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -625,6 +625,14 @@ static struct clk func_32k_ck = {
 	.clkdm_name	= "wkup_clkdm",
 };
 
+static struct clk secure_32k_ck = {
+	.name		= "secure_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.flags		= RATE_FIXED,
+	.clkdm_name	= "wkup_clkdm",
+};
+
 /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
 static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
@@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = {
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
+	.parent		= &secure_32k_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index f0090175d59..6763b8f7302 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = {
 
 /* SECURE_32K_FCK clocks */
 
-/* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
 	.ops		= &clkops_null,
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 9fc13a2cc3f..7835048041e 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,8 @@
  *
  * OMAP2 GP timer support.
  *
+ * Copyright (C) 2009 Nokia Corporation
+ *
  * Update to use new clocksource/clockevent layers
  * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
  * Copyright (C) 2007 MontaVista Software, Inc.
@@ -36,8 +38,13 @@
 #include <asm/mach/time.h>
 #include <mach/dmtimer.h>
 
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID		12
+
 static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
+static u8 __initdata gptimer_id = 1;
+static u8 __initdata inited;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
@@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = {
 	.set_mode	= omap2_gp_timer_set_mode,
 };
 
+/**
+ * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
+ * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
+ *
+ * Define the GPTIMER that the system should use for the tick timer.
+ * Meant to be called from board-*.c files in the event that GPTIMER1, the
+ * default, is unsuitable.  Returns -EINVAL on error or 0 on success.
+ */
+int __init omap2_gp_clockevent_set_gptimer(u8 id)
+{
+	if (id < 1 || id > MAX_GPTIMER_ID)
+		return -EINVAL;
+
+	BUG_ON(inited);
+
+	gptimer_id = id;
+
+	return 0;
+}
+
 static void __init omap2_gp_clockevent_init(void)
 {
 	u32 tick_rate;
+	int src;
+
+	inited = 1;
 
-	gptimer = omap_dm_timer_request_specific(1);
+	gptimer = omap_dm_timer_request_specific(gptimer_id);
 	BUG_ON(gptimer == NULL);
 
 #if defined(CONFIG_OMAP_32K_TIMER)
-	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+	src = OMAP_TIMER_SRC_32_KHZ;
 #else
-	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+	src = OMAP_TIMER_SRC_SYS_CLK;
+	WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
+	     "secure 32KiHz clock source\n");
 #endif
+
+	if (gptimer_id != 12)
+		WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
+		     "timer-gp: omap_dm_timer_set_source() failed\n");
+
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
 
+	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
+		gptimer_id, tick_rate);
+
 	omap2_gp_timer_irq.dev_id = (void *)gptimer;
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
 	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
@@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void)
 	clockevents_register_device(&clockevent_gpt);
 }
 
+/* Clocksource code */
+
 #ifdef CONFIG_OMAP_32K_TIMER
 /* 
  * When 32k-timer is enabled, don't use GPTimer for clocksource
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index a05205c12f7..55bb9963129 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -509,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
 #ifdef CONFIG_ARCH_OMAP1
 
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
 	int n = (timer - dm_timers) << 1;
 	u32 l;
@@ -517,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
 	omap_writel(l, MOD_CONF_CTRL_1);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
 #else
 
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
+	int ret = -EINVAL;
+
 	if (source < 0 || source >= 3)
-		return;
+		return -EINVAL;
 
 	clk_disable(timer->fclk);
-	clk_set_parent(timer->fclk, dm_source_clocks[source]);
+	ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
 	clk_enable(timer->fclk);
 
-	/* When the functional clock disappears, too quick writes seem to
-	 * cause an abort. */
+	/*
+	 * When the functional clock disappears, too quick writes seem
+	 * to cause an abort. XXX Is this still necessary?
+	 */
 	__delay(150000);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
index 6dc70313821..20f1054c0a8 100644
--- a/arch/arm/plat-omap/include/mach/dmtimer.h
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer);
 void omap_dm_timer_start(struct omap_dm_timer *timer);
 void omap_dm_timer_stop(struct omap_dm_timer *timer);
 
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
 void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
 void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
 void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h
new file mode 100644
index 00000000000..c88d346b59d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timer-gp.h
@@ -0,0 +1,17 @@
+/*
+ * OMAP2/3 GPTIMER support.headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+
+int __init omap2_gp_clockevent_set_gptimer(u8 id);
+
+#endif
+
-- 
GitLab


From 615dfd93e2346b604232b559e7ea0835d24abe26 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 23 Apr 2009 23:21:29 -0400
Subject: [PATCH 0790/1421] ACPI: prevent processor.max_cstate=0 boot crash

As processor.max_cstate is an init-time-only modparam,
sanity checking it at init-time is sufficient.

http://bugzilla.kernel.org/show_bug.cgi?id=13142

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6fe121434ff..436127e0eec 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1037,6 +1037,9 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
 		dev->states[i].desc[0] = '\0';
 	}
 
+	if (max_cstate == 0)
+		max_cstate = 1;
+
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		cx = &pr->power.states[i];
 		state = &dev->states[count];
-- 
GitLab


From 226fced325e2865369cbeac41c6a97536d4daa1b Mon Sep 17 00:00:00 2001
From: "Almer S. Tigelaar" <almer@gnome.org>
Date: Sun, 12 Apr 2009 11:26:26 +0000
Subject: [PATCH 0791/1421] sony-laptop: Duplicate SNC 127 Event Fix

Fixes a duplicate mapping in the SNC sony_127_events structure.

Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/sony-laptop.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index d3c92d777bd..87080d09bea 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -905,7 +905,6 @@ static struct sony_nc_event sony_127_events[] = {
 	{ 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED },
 	{ 0x86, SONYPI_EVENT_PKEY_P5 },
 	{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
-	{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
 	{ 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED },
 	{ 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED },
 	{ 0, 0 },
-- 
GitLab


From 560e84ac1b92d2a704fbfda29b46ad1b0a8d457e Mon Sep 17 00:00:00 2001
From: "Almer S. Tigelaar" <almer@gnome.org>
Date: Sun, 12 Apr 2009 11:26:27 +0000
Subject: [PATCH 0792/1421] sony-laptop: SNC 127 Initialization Fix

Fixes additional special key initialization for SNC 127 key events.
Verified / tested on a Sony VAIO SR model.

Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/sony-laptop.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 87080d09bea..4ff41a7a97d 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1003,6 +1003,7 @@ static int sony_nc_function_setup(struct acpi_device *device)
 	sony_call_snc_handle(0x0100, 0, &result);
 	sony_call_snc_handle(0x0101, 0, &result);
 	sony_call_snc_handle(0x0102, 0x100, &result);
+	sony_call_snc_handle(0x0127, 0, &result);
 
 	return 0;
 }
-- 
GitLab


From a83021a229016f93b4e532d9cef21b01be5a8bb7 Mon Sep 17 00:00:00 2001
From: "Almer S. Tigelaar" <almer@gnome.org>
Date: Sun, 12 Apr 2009 11:26:28 +0000
Subject: [PATCH 0793/1421] sony-laptop: SNC input event 38 fix

Fixes the "unknown input event 38" messages. ANYBUTTON_RELEASED is now
treated the same way as FN_KEY_RELEASED.

Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/sony-laptop.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 4ff41a7a97d..3541ca097d0 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -317,7 +317,8 @@ static void sony_laptop_report_input_event(u8 event)
 	struct input_dev *key_dev = sony_laptop_input.key_dev;
 	struct sony_laptop_keypress kp = { NULL };
 
-	if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+	if (event == SONYPI_EVENT_FNKEY_RELEASED ||
+			event == SONYPI_EVENT_ANYBUTTON_RELEASED) {
 		/* Nothing, not all VAIOs generate this event */
 		return;
 	}
-- 
GitLab


From 5aa63f038f042fd1acd6e720a95df72857db0bc7 Mon Sep 17 00:00:00 2001
From: "Almer S. Tigelaar" <almer@gnome.org>
Date: Sun, 12 Apr 2009 11:26:29 +0000
Subject: [PATCH 0794/1421] ACPI: EC: Fix ACPI EC resume non-query interrupt
 message

When resuming from standby (on a laptop) I see the following message in
my kernel.log:
"ACPI: EC: non-query interrupt received, switching to interrupt mode"
This apparently prevented sony-laptop to properly restore the brightness
level on resume.

The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the
GPE mode bit, but this is not restored in acpi_ec_resume (the function
below it). The patch below fixes this by properly restoring the GPE_MODE
bit. Tested and confirmed to work.

Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/ec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 04e90443eff..391f331674c 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1065,6 +1065,7 @@ static int acpi_ec_resume(struct acpi_device *device)
 	struct acpi_ec *ec = acpi_driver_data(device);
 	/* Enable use of GPE back */
 	clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
+	set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
 	acpi_enable_gpe(NULL, ec->gpe);
 	return 0;
 }
-- 
GitLab


From c35d4b3532ed3e2076fb14c25385cf6cef41cc69 Mon Sep 17 00:00:00 2001
From: Mattia Dongili <malattia@linux.it>
Date: Sun, 12 Apr 2009 11:26:30 +0000
Subject: [PATCH 0795/1421] sony-laptop: fix bogus error message display on
 resume

sony_backlight_update_status returns 0 on success -1 on failure (i.e.: the
return value from acpi_callsetfunc. The return value in the resume path
was broken and thus always displaying a bogus warning about not being able
to restore the brightness level.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/sony-laptop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 3541ca097d0..d93cff656c9 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1041,7 +1041,7 @@ static int sony_nc_resume(struct acpi_device *device)
 
 	/* set the last requested brightness level */
 	if (sony_backlight_device &&
-			!sony_backlight_update_status(sony_backlight_device))
+			sony_backlight_update_status(sony_backlight_device) < 0)
 		printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
 
 	return 0;
-- 
GitLab


From 53005a0a1b53bda5810c45efe3025d1884aa6bb3 Mon Sep 17 00:00:00 2001
From: Mattia Dongili <malattia@linux.it>
Date: Sun, 12 Apr 2009 11:26:31 +0000
Subject: [PATCH 0796/1421] sony-laptop: always try to unblock rfkill on load

This fixes an inconsistent behaviour when loading the driver with the
switch on or off. In the former case you would also need to soft unblock
the switch via the sysfs file entries to really disable rfkill, in the
latter you wouldn't.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Cc: Matthias Welwarsky <matze@welwarsky.de>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/sony-laptop.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index d93cff656c9..552958545f9 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1103,8 +1103,11 @@ static int sony_nc_setup_wifi_rfkill(struct acpi_device *device)
 	err = rfkill_register(sony_wifi_rfkill);
 	if (err)
 		rfkill_free(sony_wifi_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
+		sony_nc_rfkill_set(sony_wifi_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
@@ -1125,8 +1128,11 @@ static int sony_nc_setup_bluetooth_rfkill(struct acpi_device *device)
 	err = rfkill_register(sony_bluetooth_rfkill);
 	if (err)
 		rfkill_free(sony_bluetooth_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
+		sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
@@ -1146,8 +1152,11 @@ static int sony_nc_setup_wwan_rfkill(struct acpi_device *device)
 	err = rfkill_register(sony_wwan_rfkill);
 	if (err)
 		rfkill_free(sony_wwan_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
+		sony_nc_rfkill_set(sony_wwan_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
@@ -1167,8 +1176,11 @@ static int sony_nc_setup_wimax_rfkill(struct acpi_device *device)
 	err = rfkill_register(sony_wimax_rfkill);
 	if (err)
 		rfkill_free(sony_wimax_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
+		sony_nc_rfkill_set(sony_wimax_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
-- 
GitLab


From a65131e942e25c707a652fa4ec2cfcd8b63fec11 Mon Sep 17 00:00:00 2001
From: Lin Ming <ming.m.lin@intel.com>
Date: Thu, 16 Apr 2009 15:18:16 +0800
Subject: [PATCH 0797/1421] I/O port protection: update for windows
 compatibility.

For windows compatibility,
1) On a port protection violation, simply ignore the request and
   do not return an exception (allow the control method to continue execution.)
2) If only part of the request overlaps a protected port,
   read/write the individual ports that are not protected.

http://bugzilla.kernel.org/show_bug.cgi?id=13036

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/hwvalid.c | 85 +++++++++++++++++++++++++++++------
 1 file changed, 71 insertions(+), 14 deletions(-)

diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index 7737afb157c..9c8345754f6 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -151,7 +151,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
 		ACPI_ERROR((AE_INFO,
 			    "Illegal I/O port address/length above 64K: 0x%p/%X",
 			    ACPI_CAST_PTR(void, address), byte_width));
-		return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+		return_ACPI_STATUS(AE_LIMIT);
 	}
 
 	/* Exit if requested address is not within the protected port table */
@@ -178,11 +178,12 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
 			/* Port illegality may depend on the _OSI calls made by the BIOS */
 
 			if (acpi_gbl_osi_data >= port_info->osi_dependency) {
-				ACPI_ERROR((AE_INFO,
-					    "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
-					    ACPI_CAST_PTR(void, address),
-					    byte_width, port_info->name,
-					    port_info->start, port_info->end));
+				ACPI_DEBUG_PRINT((ACPI_DB_IO,
+						  "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
+						  ACPI_CAST_PTR(void, address),
+						  byte_width, port_info->name,
+						  port_info->start,
+						  port_info->end));
 
 				return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
 			}
@@ -206,7 +207,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
  *              Value               Where value is placed
  *              Width               Number of bits
  *
- * RETURN:      Value read from port
+ * RETURN:      Status and value read from port
  *
  * DESCRIPTION: Read data from an I/O port or register. This is a front-end
  *              to acpi_os_read_port that performs validation on both the port
@@ -217,14 +218,43 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
 acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
 {
 	acpi_status status;
+	u32 one_byte;
+	u32 i;
+
+	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
-	if (ACPI_FAILURE(status)) {
+	if (ACPI_SUCCESS(status)) {
+		status = acpi_os_read_port(address, value, width);
 		return status;
 	}
 
-	status = acpi_os_read_port(address, value, width);
-	return status;
+	if (status != AE_AML_ILLEGAL_ADDRESS) {
+		return status;
+	}
+
+	/*
+	 * There has been a protection violation within the request. Fall
+	 * back to byte granularity port I/O and ignore the failing bytes.
+	 * This provides Windows compatibility.
+	 */
+	for (i = 0, *value = 0; i < width; i += 8) {
+
+		/* Validate and read one byte */
+
+		if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+			status = acpi_os_read_port(address, &one_byte, 8);
+			if (ACPI_FAILURE(status)) {
+				return status;
+			}
+
+			*value |= (one_byte << i);
+		}
+
+		address++;
+	}
+
+	return AE_OK;
 }
 
 /******************************************************************************
@@ -235,7 +265,7 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
  *              Value               Value to write
  *              Width               Number of bits
  *
- * RETURN:      None
+ * RETURN:      Status
  *
  * DESCRIPTION: Write data to an I/O port or register. This is a front-end
  *              to acpi_os_write_port that performs validation on both the port
@@ -246,12 +276,39 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
 acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
 {
 	acpi_status status;
+	u32 i;
+
+	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
-	if (ACPI_FAILURE(status)) {
+	if (ACPI_SUCCESS(status)) {
+		status = acpi_os_write_port(address, value, width);
 		return status;
 	}
 
-	status = acpi_os_write_port(address, value, width);
-	return status;
+	if (status != AE_AML_ILLEGAL_ADDRESS) {
+		return status;
+	}
+
+	/*
+	 * There has been a protection violation within the request. Fall
+	 * back to byte granularity port I/O and ignore the failing bytes.
+	 * This provides Windows compatibility.
+	 */
+	for (i = 0; i < width; i += 8) {
+
+		/* Validate and write one byte */
+
+		if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+			status =
+			    acpi_os_write_port(address, (value >> i) & 0xFF, 8);
+			if (ACPI_FAILURE(status)) {
+				return status;
+			}
+		}
+
+		address++;
+	}
+
+	return AE_OK;
 }
-- 
GitLab


From a38d75fa2e48d4960b656eac39bc8a6b584a83c0 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 24 Apr 2009 00:32:52 -0400
Subject: [PATCH 0798/1421] Revert "ACPICA: delete check for AML access to port
 0x81-83"

This reverts commit fdbdc7fc79c02ae4ede869d514179a2c65633d28.

That temporary quick-fix is no longer necessary,
as the previous patch, a65131e942e25c707a652fa4ec2cfcd8b63fec11,
"I/O port protection: update for windows compatibility"
should handle this issue for all ports, including this one.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/hwvalid.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index 9c8345754f6..ec33f270c5b 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -90,6 +90,7 @@ static const struct acpi_port_info acpi_protected_ports[] = {
 	{"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
 	{"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
 	{"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
+	{"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
 	{"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
 	{"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
 	{"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
-- 
GitLab


From b7f0ab460f772b09a9c664d746236a280fec714c Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed, 15 Apr 2009 21:46:36 +0100
Subject: [PATCH 0799/1421] ACPI, i915: Register ACPI video even when not
 modesetting

The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.

http://bugzilla.kernel.org/show_bug.cgi?id=13048

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/gpu/drm/i915/i915_opregion.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 69427722d20..8dc1fd3115c 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -370,11 +370,8 @@ int intel_opregion_init(struct drm_device *dev, int resume)
 	if (mboxes & MBOX_ACPI) {
 		DRM_DEBUG("Public ACPI methods supported\n");
 		opregion->acpi = base + OPREGION_ACPI_OFFSET;
-		if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
 			intel_didl_outputs(dev);
-			if (!resume)
-				acpi_video_register();
-		}
 	} else {
 		DRM_DEBUG("Public ACPI methods not supported\n");
 		err = -ENOTSUPP;
@@ -391,6 +388,10 @@ int intel_opregion_init(struct drm_device *dev, int resume)
 		opregion->asle = base + OPREGION_ASLE_OFFSET;
 	}
 
+	if (!resume)
+		acpi_video_register();
+
+
 	/* Notify BIOS we are ready to handle ACPI video ext notifs.
 	 * Right now, all the events are handled by the ACPI video module.
 	 * We don't actually need to do anything with them. */
-- 
GitLab


From e8a1344119f3787b822d110336e5dd33f6ffca70 Mon Sep 17 00:00:00 2001
From: Maciej Cencora <m.cencora@gmail.com>
Date: Fri, 17 Apr 2009 15:55:09 +0200
Subject: [PATCH 0800/1421] drm/radeon: bump minor version for occlusion
 queries support

We already added support, just need to let userspace
know when it can use them.

Signed-off-by: Maciej Cencora <m.cencora@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_drv.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index ed4d27e6ee6..8071d965f14 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -99,9 +99,10 @@
  * 1.27- Add support for IGP GART
  * 1.28- Add support for VBL on CRTC2
  * 1.29- R500 3D cmd buffer support
+ * 1.30- Add support for occlusion queries
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		29
+#define DRIVER_MINOR		30
 #define DRIVER_PATCHLEVEL	0
 
 /*
-- 
GitLab


From c964b129425c98cb37da365e772bdbe5281f3a05 Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@linux.ie>
Date: Wed, 22 Apr 2009 18:32:56 +1000
Subject: [PATCH 0801/1421] drm/kms: don't try to shortcut drm mode set
 function

We have a drm_set_config which takes a crtc/encoder/mode setup,
and checks it to see if it can shortcut and just do a base setup,
or whether a complete mode setting is required.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_crtc_helper.c | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index a04639dc633..45890447fee 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -561,7 +561,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	int saved_x, saved_y;
 	struct drm_encoder *encoder;
 	bool ret = true;
-	bool depth_changed, bpp_changed;
 
 	adjusted_mode = drm_mode_duplicate(dev, mode);
 
@@ -570,15 +569,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	if (!crtc->enabled)
 		return true;
 
-	if (old_fb && crtc->fb) {
-		depth_changed = (old_fb->depth != crtc->fb->depth);
-		bpp_changed = (old_fb->bits_per_pixel !=
-			       crtc->fb->bits_per_pixel);
-	} else {
-		depth_changed = true;
-		bpp_changed = true;
-	}
-
 	saved_mode = crtc->mode;
 	saved_x = crtc->x;
 	saved_y = crtc->y;
@@ -590,15 +580,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	crtc->x = x;
 	crtc->y = y;
 
-	if (drm_mode_equal(&saved_mode, &crtc->mode)) {
-		if (saved_x != crtc->x || saved_y != crtc->y ||
-		    depth_changed || bpp_changed) {
-			ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
-							 old_fb);
-			goto done;
-		}
-	}
-
 	/* Pass our mode to the connectors and the CRTC to give them a chance to
 	 * adjust it according to limitations or connector properties, and also
 	 * a chance to reject the mode entirely.
-- 
GitLab


From 59738d5c974d81b566cb53c203f5db268b7b3545 Mon Sep 17 00:00:00 2001
From: Jonas Bonn <jonas@southpole.se>
Date: Fri, 24 Apr 2009 15:05:02 +1000
Subject: [PATCH 0802/1421] drm: add control node checks missing from kms merge

This line that checks the DRM_CONTROL_ALLOW flag was missed from the KMS
merge.  Re-add the check on the IOCTL, as this is currently the only use of
this flag.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index c4ada8b6295..f01def16a66 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -456,7 +456,8 @@ int drm_ioctl(struct inode *inode, struct file *filp,
 		retcode = -EINVAL;
 	} else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) ||
 		   ((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) ||
-		   ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) {
+		   ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) ||
+		   (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) {
 		retcode = -EACCES;
 	} else {
 		if (cmd & (IOC_IN | IOC_OUT)) {
-- 
GitLab


From 400138bc8b9fca66d7d40511eaed2dc3a75426c8 Mon Sep 17 00:00:00 2001
From: Jonas Bonn <jonas@southpole.se>
Date: Fri, 24 Apr 2009 15:06:36 +1000
Subject: [PATCH 0803/1421] drm: remove unreachable code in drm_sysfs.c

This code was never going to get called in there.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_sysfs.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 022876ae34f..8f9372921f8 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -489,9 +489,7 @@ int drm_sysfs_device_add(struct drm_minor *minor)
 
 	return 0;
 
-	device_unregister(&minor->kdev);
 err_out:
-
 	return err;
 }
 
-- 
GitLab


From 30ddbd94401a132f4d932775d1902b3c9a8c41b5 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Mon, 2 Mar 2009 11:13:04 +1000
Subject: [PATCH 0804/1421] drm: clean the map list before destroying the hash
 table

The hash tables contains some of the mapping
so its really nice to have it for the deletion phase.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_stub.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index ef878615c49..e8c2fd4c5e6 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -502,11 +502,11 @@ void drm_put_dev(struct drm_device *dev)
 		dev->agp = NULL;
 	}
 
-	drm_ht_remove(&dev->map_hash);
-	drm_ctxbitmap_cleanup(dev);
-
 	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
 		drm_rmmap(dev, r_list->map);
+	drm_ht_remove(&dev->map_hash);
+
+	drm_ctxbitmap_cleanup(dev);
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_put_minor(&dev->control);
-- 
GitLab


From 3788f48a0fad246dbab826e8b2f07b403b0e3279 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Mon, 2 Mar 2009 10:37:44 +1000
Subject: [PATCH 0805/1421] drm: cleanup properly in drm_get_dev() failure
 paths

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_stub.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index e8c2fd4c5e6..b9631e3a1ea 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -402,14 +402,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 	if (dev->driver->load) {
 		ret = dev->driver->load(dev, ent->driver_data);
 		if (ret)
-			goto err_g3;
+			goto err_g4;
 	}
 
         /* setup the grouping for the legacy output */
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
 		if (ret)
-			goto err_g3;
+			goto err_g4;
 	}
 
 	list_add_tail(&dev->driver_item, &driver->device_list);
@@ -420,8 +420,11 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 
 	return 0;
 
-err_g3:
+err_g4:
 	drm_put_minor(&dev->primary);
+err_g3:
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		drm_put_minor(&dev->control);
 err_g2:
 	pci_disable_device(pdev);
 err_g1:
-- 
GitLab


From d2c8604121648b744ebb127991f1c5876931885e Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 23 Apr 2009 19:19:42 -0400
Subject: [PATCH 0806/1421] x86, hpet: Stop soliciting hpet=force users on
 ICH4M

The HPET in the ICH4M is not documented in the data sheet
because it was not officially validated.

While it is fine for hackers to continue to use "hpet=force"
to enable the hardware that they have, it is not prudent to
solicit additional "hpet=force" users on this hardware.

[ Impact: remove hpet=force syslog message on old-ICH systems ]

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <alpine.LFD.2.00.0904231918510.15843@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/quirks.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e95022e4f5d..7563b31b4f0 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -261,8 +261,6 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
 {
 	if (hpet_force_user)
 		old_ich_force_enable_hpet(dev);
-	else
-		hpet_print_force_info();
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
-- 
GitLab


From 097102c2d04974bdfcfa16a5f3062d499842139c Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Tue, 21 Apr 2009 09:33:14 +0200
Subject: [PATCH 0807/1421] pktcdvd.h should include mempool.h

Fix this build error:
In file included from fs/compat_ioctl.c:104:
include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 include/linux/pktcdvd.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 04b4d7330e6..d745f5b6c7b 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -113,6 +113,7 @@ struct pkt_ctrl_command {
 #include <linux/cdrom.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/mempool.h>
 
 /* default bio write queue congestion marks */
 #define PKT_WRITE_CONGESTION_ON    10000
-- 
GitLab


From 42dad7647aec49b3ad20dd0cb832b232a6ae514f Mon Sep 17 00:00:00 2001
From: Jerome Marchand <jmarchan@redhat.com>
Date: Wed, 22 Apr 2009 14:01:49 +0200
Subject: [PATCH 0808/1421] block: simplify I/O stat accounting

This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.

Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-core.c       | 6 ++++--
 block/blk-merge.c      | 5 ++++-
 block/blk-sysfs.c      | 4 ----
 block/blk.h            | 7 +------
 include/linux/blkdev.h | 3 +++
 5 files changed, 12 insertions(+), 13 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 07ab75403e1..2998fe3a237 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -643,7 +643,7 @@ static inline void blk_free_request(struct request_queue *q, struct request *rq)
 }
 
 static struct request *
-blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
+blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
 {
 	struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
 
@@ -652,7 +652,7 @@ blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
 
 	blk_rq_init(q, rq);
 
-	rq->cmd_flags = rw | REQ_ALLOCED;
+	rq->cmd_flags = flags | REQ_ALLOCED;
 
 	if (priv) {
 		if (unlikely(elv_set_request(q, rq, gfp_mask))) {
@@ -792,6 +792,8 @@ static struct request *get_request(struct request_queue *q, int rw_flags,
 	if (priv)
 		rl->elvpriv++;
 
+	if (blk_queue_io_stat(q))
+		rw_flags |= REQ_IO_STAT;
 	spin_unlock_irq(q->queue_lock);
 
 	rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 63760ca3da0..23d2a6fe34a 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -402,7 +402,10 @@ static int attempt_merge(struct request_queue *q, struct request *req,
 
 	elv_merge_requests(q, req, next);
 
-	blk_account_io_merge(req);
+	/*
+	 * 'next' is going away, so update stats accordingly
+	 */
+	blk_account_io_merge(next);
 
 	req->ioprio = ioprio_best(req->ioprio, next->ioprio);
 	if (blk_rq_cpu_valid(next))
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index cac4e9febe6..3ff9bba3379 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -209,14 +209,10 @@ static ssize_t queue_iostats_store(struct request_queue *q, const char *page,
 	ssize_t ret = queue_var_store(&stats, page, count);
 
 	spin_lock_irq(q->queue_lock);
-	elv_quiesce_start(q);
-
 	if (stats)
 		queue_flag_set(QUEUE_FLAG_IO_STAT, q);
 	else
 		queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
-
-	elv_quiesce_end(q);
 	spin_unlock_irq(q->queue_lock);
 
 	return ret;
diff --git a/block/blk.h b/block/blk.h
index 5dfc41267a0..79c85f7c9ff 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -114,12 +114,7 @@ static inline int blk_cpu_to_group(int cpu)
 
 static inline int blk_do_io_stat(struct request *rq)
 {
-	struct gendisk *disk = rq->rq_disk;
-
-	if (!disk || !disk->queue)
-		return 0;
-
-	return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV);
+	return rq->rq_disk && blk_rq_io_stat(rq);
 }
 
 #endif
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ba54c834a59..2755d5c6da2 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -118,6 +118,7 @@ enum rq_flag_bits {
 	__REQ_COPY_USER,	/* contains copies of user pages */
 	__REQ_INTEGRITY,	/* integrity metadata has been remapped */
 	__REQ_NOIDLE,		/* Don't anticipate more IO after this one */
+	__REQ_IO_STAT,		/* account I/O stat */
 	__REQ_NR_BITS,		/* stops here */
 };
 
@@ -145,6 +146,7 @@ enum rq_flag_bits {
 #define REQ_COPY_USER	(1 << __REQ_COPY_USER)
 #define REQ_INTEGRITY	(1 << __REQ_INTEGRITY)
 #define REQ_NOIDLE	(1 << __REQ_NOIDLE)
+#define REQ_IO_STAT	(1 << __REQ_IO_STAT)
 
 #define BLK_MAX_CDB	16
 
@@ -598,6 +600,7 @@ enum {
 				 blk_failfast_transport(rq) ||	\
 				 blk_failfast_driver(rq))
 #define blk_rq_started(rq)	((rq)->cmd_flags & REQ_STARTED)
+#define blk_rq_io_stat(rq)	((rq)->cmd_flags & REQ_IO_STAT)
 
 #define blk_account_rq(rq)	(blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) 
 
-- 
GitLab


From f3c737de8f57b5ce756010c2175f7d574194b30d Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.ne>
Date: Thu, 23 Apr 2009 08:37:58 +0200
Subject: [PATCH 0809/1421] umem: fix request_queue lock warning

The umem driver issues two warnings on boot, due to blk_plug_device() and
blk_remove_plug() being called without q->queue_lock held.  Starting with
e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions
warn if q->queue_lock doesn't appear to be locked.  In fact, q->queue_lock
is NULL (though that apparently isn't otherwise a problem as the driver is
using card->lock for everything).

Although blk_init_queue() with take a request_fn_proc and spinlock_t*,
there isn't a corresponding init helper that takes a make_request_fn.
Setting queue_lock to &card->lock explicitly seems to work fine for me.
The warning goes away and the device appears to behave.

[    1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver
[    1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))
[    1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100)
[    1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE)
[    1.571114] umem 0000:02:01.0: Window size 16777216 bytes, IRQ 20
[    1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device.
[    1.585989]  umema:<4>------------[ cut here ]------------
[    1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106()
[    1.592025] Hardware name: H8SSL
[    1.592025] Modules linked in:
[    1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8
[    1.592025] Call Trace:
[    1.592025]  [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[    1.592025]  [<ffffffff8025a5b5>] ? save_trace+0x3f/0x9b
[    1.592025]  [<ffffffff8025a68b>] ? add_lock_to_list+0x7a/0xba
[    1.592025]  [<ffffffff8025e609>] ? validate_chain+0xb3b/0xce8
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff8025ef04>] ? __lock_acquire+0x74e/0x7b9
[    1.592025]  [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[    1.592025]  [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff803ad165>] blk_plug_device+0x6d/0x106
[    1.592025]  [<ffffffff80441575>] mm_make_request+0x46/0x59
[    1.592025]  [<ffffffff803ac2d9>] generic_make_request+0x335/0x3cf
[    1.592025]  [<ffffffff8027fcc7>] ? mempool_alloc_slab+0x11/0x13
[    1.592025]  [<ffffffff8027fdce>] ? mempool_alloc+0x45/0x101
[    1.592025]  [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[    1.592025]  [<ffffffff803adda5>] submit_bio+0x10a/0x119
[    1.592025]  [<ffffffff802c8d00>] submit_bh+0xe5/0x109
[    1.592025]  [<ffffffff802cbf43>] block_read_full_page+0x2aa/0x2cb
[    1.592025]  [<ffffffff802cf4c4>] ? blkdev_get_block+0x0/0x4c
[    1.592025]  [<ffffffff805c90a8>] ? _spin_unlock_irq+0x36/0x51
[    1.592025]  [<ffffffff80286836>] ? __lru_cache_add+0x92/0xb2
[    1.592025]  [<ffffffff802cf008>] blkdev_readpage+0x13/0x15
[    1.592025]  [<ffffffff8027de06>] read_cache_page_async+0x90/0x134
[    1.592025]  [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[    1.592025]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.592025]  [<ffffffff8027deb8>] read_cache_page+0xe/0x45
[    1.592025]  [<ffffffff802f5170>] read_dev_sector+0x2e/0x93
[    1.592025]  [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[    1.592025]  [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[    1.592025]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.592025]  [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[    1.592025]  [<ffffffff802ceae9>] __blkdev_get+0x259/0x336
[    1.592025]  [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[    1.592025]  [<ffffffff802cebd1>] blkdev_get+0xb/0xd
[    1.592025]  [<ffffffff802f5773>] register_disk+0xc4/0x12b
[    1.592025]  [<ffffffff803b2a7b>] add_disk+0xc3/0x12d
[    1.592025]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.592025]  [<ffffffff808a1e73>] mm_init+0x129/0x1a5
[    1.592025]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.592025]  [<ffffffff80209056>] _stext+0x56/0x130
[    1.592025]  [<ffffffff80274932>] ? register_irq_proc+0xae/0xca
[    1.592025]  [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[    1.592025]  [<ffffffff8087f975>] kernel_init+0x132/0x18b
[    1.592025]  [<ffffffff8020d17a>] child_rip+0xa/0x20
[    1.592025]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.592025]  [<ffffffff8087f843>] ? kernel_init+0x0/0x18b
[    1.592025]  [<ffffffff8020d170>] ? child_rip+0x0/0x20
[    1.592025] ---[ end trace 7150b3b86da74e1e ]---
[    1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91()
[    1.893848] Hardware name: H8SSL
[    1.893848] Modules linked in:
[    1.893848] Pid: 1, comm: swapper Tainted: G        W  2.6.29 #8
[    1.893848] Call Trace:
[    1.893848]  [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[    1.893848]  [<ffffffff805c8411>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[    1.893848]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.893848]  [<ffffffff80254245>] ? __atomic_notifier_call_chain+0x0/0xb2
[    1.893848]  [<ffffffff805c90a3>] ? _spin_unlock_irq+0x31/0x51
[    1.893848]  [<ffffffff805c90bf>] ? _spin_unlock_irq+0x4d/0x51
[    1.893848]  [<ffffffff8044157d>] ? mm_make_request+0x4e/0x59
[    1.893848]  [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[    1.893848]  [<ffffffff8025a75d>] ? put_lock_stats+0x25/0x27
[    1.893848]  [<ffffffff80441504>] ? mm_unplug_device+0x25/0x50
[    1.893848]  [<ffffffff803acf23>] blk_remove_plug+0x5f/0x91
[    1.893848]  [<ffffffff8044150f>] mm_unplug_device+0x30/0x50
[    1.893848]  [<ffffffff803ab74a>] blk_unplug+0x78/0x7d
[    1.893848]  [<ffffffff803ab75c>] blk_backing_dev_unplug+0xd/0xf
[    1.893848]  [<ffffffff802c853c>] block_sync_page+0x4a/0x4c
[    1.893848]  [<ffffffff8027da1c>] sync_page+0x44/0x4d
[    1.893848]  [<ffffffff805c66fd>] __wait_on_bit_lock+0x42/0x8a
[    1.893848]  [<ffffffff8027d9d8>] ? sync_page+0x0/0x4d
[    1.893848]  [<ffffffff8027d9c4>] __lock_page+0x64/0x6b
[    1.893848]  [<ffffffff802508db>] ? wake_bit_function+0x0/0x2a
[    1.893848]  [<ffffffff8027de4a>] read_cache_page_async+0xd4/0x134
[    1.893848]  [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[    1.893848]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.893848]  [<ffffffff8027deb8>] read_cache_page+0xe/0x45
[    1.893848]  [<ffffffff802f5170>] read_dev_sector+0x2e/0x93
[    1.893848]  [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[    1.893848]  [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[    1.893848]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.893848]  [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[    1.893848]  [<ffffffff802ceae9>] __blkdev_get+0x259/0x336
[    1.893848]  [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[    1.893848]  [<ffffffff802cebd1>] blkdev_get+0xb/0xd
[    1.893848]  [<ffffffff802f5773>] register_disk+0xc4/0x12b
[    1.893848]  [<ffffffff803b2a7b>] add_disk+0xc3/0x12d
[    1.893848]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.893848]  [<ffffffff808a1e73>] mm_init+0x129/0x1a5
[    1.893848]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.893848]  [<ffffffff80209056>] _stext+0x56/0x130
[    1.893848]  [<ffffffff80274932>] ? register_irq_proc+0xae/0xca
[    1.893848]  [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[    1.893848]  [<ffffffff8087f975>] kernel_init+0x132/0x18b
[    1.893848]  [<ffffffff8020d17a>] child_rip+0xa/0x20
[    1.893848]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.893848]  [<ffffffff8087f843>] ? kernel_init+0x0/0x18b
[    1.893848]  [<ffffffff8020d170>] ? child_rip+0x0/0x20
[    1.893848] ---[ end trace 7150b3b86da74e1f ]---

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/block/umem.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 9744d59a69f..858c34dd032 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -906,6 +906,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev,
 		goto failed_alloc;
 
 	blk_queue_make_request(card->queue, mm_make_request);
+	card->queue->queue_lock = &card->lock;
 	card->queue->queuedata = card;
 	card->queue->unplug_fn = mm_unplug_device;
 
-- 
GitLab


From 17d5c8ca7572124c9623045f24b0c21d4aa2b47f Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 23 Apr 2009 10:32:59 +0200
Subject: [PATCH 0810/1421] block: fix intermittent dm timeout based oops

Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame.  This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window).  Fix this by splicing back from
the ususally empty list to the q->timeout_list.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-timeout.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 8f570c4c80e..1ec0d503cac 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -230,6 +230,13 @@ void blk_abort_queue(struct request_queue *q)
 	list_for_each_entry_safe(rq, tmp, &list, timeout_list)
 		blk_abort_request(rq);
 
+	/*
+	 * Occasionally, blk_abort_request() will return without
+	 * deleting the element from the list. Make sure we add those back
+	 * instead of leaving them on the local stack list.
+	 */
+	list_splice(&list, &q->timeout_list);
+
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 }
-- 
GitLab


From 26a2ac009c2b07e1959c8864ca23486c1c485587 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Thu, 23 Apr 2009 12:13:27 +0200
Subject: [PATCH 0811/1421] cfq-iosched: clear ->prio_trees[] on cfqd alloc

Not strictly needed, but we should make it clear that we init the
rbtree roots here.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 7e13f04b5ed..20a54b8e03e 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -2446,12 +2446,22 @@ static void cfq_exit_queue(struct elevator_queue *e)
 static void *cfq_init_queue(struct request_queue *q)
 {
 	struct cfq_data *cfqd;
+	int i;
 
 	cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
 	if (!cfqd)
 		return NULL;
 
 	cfqd->service_tree = CFQ_RB_ROOT;
+
+	/*
+	 * Not strictly needed (since RB_ROOT just clears the node and we
+	 * zeroed cfqd on alloc), but better be safe in case someone decides
+	 * to add magic to the rb code
+	 */
+	for (i = 0; i < CFQ_PRIO_LISTS; i++)
+		cfqd->prio_trees[i] = RB_ROOT;
+
 	INIT_LIST_HEAD(&cfqd->cic_list);
 
 	cfqd->queue = q;
-- 
GitLab


From 3ac6c9f8a66726745136e46f63600550c3eb6cec Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Thu, 23 Apr 2009 12:14:56 +0200
Subject: [PATCH 0812/1421] cfq-iosched: fix bug with aliased request and
 cooperation detection

cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.

cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 20a54b8e03e..b0b754a6882 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -584,12 +584,13 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector,
 		else
 			break;
 		p = n;
+		cfqq = NULL;
 	}
 
 	*ret_parent = parent;
 	if (rb_link)
 		*rb_link = p;
-	return NULL;
+	return cfqq;
 }
 
 static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
@@ -608,10 +609,10 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 
 	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector,
 					 &parent, &p);
-	BUG_ON(__cfqq);
-
-	rb_link_node(&cfqq->p_node, parent, p);
-	rb_insert_color(&cfqq->p_node, root);
+	if (!__cfqq) {
+		rb_link_node(&cfqq->p_node, parent, p);
+		rb_insert_color(&cfqq->p_node, root);
+	}
 }
 
 /*
-- 
GitLab


From f2d1f0ae7851be5ebd9613a80dac139270938809 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Thu, 23 Apr 2009 12:19:38 +0200
Subject: [PATCH 0813/1421] cfq-iosched: cache prio_tree root in cfqq->p_root

Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.

Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cfq-iosched.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index b0b754a6882..a55a9bd75bd 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -154,6 +154,8 @@ struct cfq_queue {
 	unsigned long rb_key;
 	/* prio tree member */
 	struct rb_node p_node;
+	/* prio tree root we belong to, if any */
+	struct rb_root *p_root;
 	/* sorted list of pending requests */
 	struct rb_root sort_list;
 	/* if fifo isn't expired, next request to serve */
@@ -558,10 +560,10 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 }
 
 static struct cfq_queue *
-cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector,
-		     struct rb_node **ret_parent, struct rb_node ***rb_link)
+cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
+		     sector_t sector, struct rb_node **ret_parent,
+		     struct rb_node ***rb_link)
 {
-	struct rb_root *root = &cfqd->prio_trees[ioprio];
 	struct rb_node **p, *parent;
 	struct cfq_queue *cfqq = NULL;
 
@@ -595,24 +597,27 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector,
 
 static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
-	struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio];
 	struct rb_node **p, *parent;
 	struct cfq_queue *__cfqq;
 
-	if (!RB_EMPTY_NODE(&cfqq->p_node))
-		rb_erase_init(&cfqq->p_node, root);
+	if (cfqq->p_root) {
+		rb_erase(&cfqq->p_node, cfqq->p_root);
+		cfqq->p_root = NULL;
+	}
 
 	if (cfq_class_idle(cfqq))
 		return;
 	if (!cfqq->next_rq)
 		return;
 
-	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector,
+	cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
+	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
 					 &parent, &p);
 	if (!__cfqq) {
 		rb_link_node(&cfqq->p_node, parent, p);
-		rb_insert_color(&cfqq->p_node, root);
-	}
+		rb_insert_color(&cfqq->p_node, cfqq->p_root);
+	} else
+		cfqq->p_root = NULL;
 }
 
 /*
@@ -657,8 +662,10 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 
 	if (!RB_EMPTY_NODE(&cfqq->rb_node))
 		cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
-	if (!RB_EMPTY_NODE(&cfqq->p_node))
-		rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]);
+	if (cfqq->p_root) {
+		rb_erase(&cfqq->p_node, cfqq->p_root);
+		cfqq->p_root = NULL;
+	}
 
 	BUG_ON(!cfqd->busy_queues);
 	cfqd->busy_queues--;
@@ -965,7 +972,7 @@ static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
 static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
 				    struct cfq_queue *cur_cfqq)
 {
-	struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio];
+	struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio];
 	struct rb_node *parent, *node;
 	struct cfq_queue *__cfqq;
 	sector_t sector = cfqd->last_position;
@@ -977,8 +984,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
 	 * First, if we find a request starting at the end of the last
 	 * request, choose it.
 	 */
-	__cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio,
-				      sector, &parent, NULL);
+	__cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL);
 	if (__cfqq)
 		return __cfqq;
 
-- 
GitLab


From 9ae2ccf26416ed52874718e2b0c8e6813253263a Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date: Fri, 24 Apr 2009 08:57:47 -0400
Subject: [PATCH 0814/1421] maintainers: Fix PowerPC 4xx git tree

Update the git tree URL for the PowerPC 4xx git tree.

Reported-by: Denis ChengRq <crquan@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index e133ba4de41..53d6e611ead 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3375,7 +3375,7 @@ P:	Matt Porter
 M:	mporter@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-- 
GitLab


From 644e28f3426810710b176080cc906995ebc24b63 Mon Sep 17 00:00:00 2001
From: Valentine Barshak <vbarshak@ru.mvista.com>
Date: Thu, 23 Apr 2009 10:55:06 +0000
Subject: [PATCH 0815/1421] powerpc/44x: Correct memory size calculation for
 denali-based boards

Some U-Boot versions incorrectly set the number of chipselects to two
for Sequoia/Rainier boards while they only have one chipselect hardwired.
This patch adds a workaround for this, hardcoding the number of chipselects
to one for sequioa/rainer board models and reading the actual value from
the memory controller register DDR0_10 otherwise.

It also fixes another error in the way ibm4xx_denali_fixup_memsize
calculates memory size. When testing the DDR_REDUC bit, the polarity is
backwards.  A "1" implies 32-bit wide memory while a "0" implies 64-bit
wide memory.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/4xx.c | 56 +++++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 5c878436f34..325b310573b 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -158,21 +158,33 @@ void ibm440spe_fixup_memsize(void)
 
 #define DDR_GET_VAL(val, mask, shift)	(((val) >> (shift)) & (mask))
 
-void ibm4xx_denali_fixup_memsize(void)
+/*
+ * Some U-Boot versions set the number of chipselects to two
+ * for Sequoia/Rainier boards while they only have one chipselect
+ * hardwired. Hardcode the number of chipselects to one
+ * for sequioa/rainer board models or read the actual value
+ * from the memory controller register DDR0_10 otherwise.
+ */
+static inline u32 ibm4xx_denali_get_cs(void)
 {
-	u32 val, max_cs, max_col, max_row;
-	u32 cs, col, row, bank, dpath;
-	unsigned long memsize;
+	void *devp;
+	char model[64];
+	u32 val, cs;
 
-	val = SDRAM0_READ(DDR0_02);
-	if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
-		fatal("DDR controller is not initialized\n");
+	devp = finddevice("/");
+	if (!devp)
+		goto read_cs;
 
-	/* get maximum cs col and row values */
-	max_cs  = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
-	max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
-	max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+	if (getprop(devp, "model", model, sizeof(model)) <= 0)
+		goto read_cs;
 
+	model[sizeof(model)-1] = 0;
+
+	if (!strcmp(model, "amcc,sequoia") ||
+	    !strcmp(model, "amcc,rainier"))
+		return 1;
+
+read_cs:
 	/* get CS value */
 	val = SDRAM0_READ(DDR0_10);
 
@@ -183,7 +195,25 @@ void ibm4xx_denali_fixup_memsize(void)
 			cs++;
 		val = val >> 1;
 	}
+	return cs;
+}
+
+void ibm4xx_denali_fixup_memsize(void)
+{
+	u32 val, max_cs, max_col, max_row;
+	u32 cs, col, row, bank, dpath;
+	unsigned long memsize;
+
+	val = SDRAM0_READ(DDR0_02);
+	if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
+		fatal("DDR controller is not initialized\n");
 
+	/* get maximum cs col and row values */
+	max_cs  = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
+	max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
+	max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+
+	cs = ibm4xx_denali_get_cs();
 	if (!cs)
 		fatal("No memory installed\n");
 	if (cs > max_cs)
@@ -193,9 +223,9 @@ void ibm4xx_denali_fixup_memsize(void)
 	val = SDRAM0_READ(DDR0_14);
 
 	if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
-		dpath = 8; /* 64 bits */
-	else
 		dpath = 4; /* 32 bits */
+	else
+		dpath = 8; /* 64 bits */
 
 	/* get address pins (rows) */
  	val = SDRAM0_READ(DDR0_42);
-- 
GitLab


From 8c652f96d3852b97a49c331cd0bb02d22f3cb31b Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Fri, 24 Apr 2009 01:01:56 +0200
Subject: [PATCH 0816/1421] do_execve() must not clear fs->in_exec if it was
 set by another thread

If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:

	Two threads T1 and T2 and another process P, all share the same
	->fs.

	T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
	->fs is shared, we set LSM_UNSAFE but not ->in_exec.

	P exits and decrements fs->users.

	T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
	shared, we set fs->in_exec.

	T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
	return to the user-space.

	T1 does clone(CLONE_FS /* without CLONE_THREAD */).

	T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
	another process.

Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.

When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.

Also, we do not need fs->lock to clear fs->in_exec.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/compat.c | 11 +++++------
 fs/exec.c   | 19 ++++++++++---------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index 379a399bf5c..681ed81e6be 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1476,6 +1476,7 @@ int compat_do_execve(char * filename,
 	struct linux_binprm *bprm;
 	struct file *file;
 	struct files_struct *displaced;
+	bool clear_in_exec;
 	int retval;
 
 	retval = unshare_files(&displaced);
@@ -1498,8 +1499,9 @@ int compat_do_execve(char * filename,
 		goto out_unlock;
 
 	retval = check_unsafe_exec(bprm);
-	if (retval)
+	if (retval < 0)
 		goto out_unlock;
+	clear_in_exec = retval;
 
 	file = open_exec(filename);
 	retval = PTR_ERR(file);
@@ -1546,9 +1548,7 @@ int compat_do_execve(char * filename,
 		goto out;
 
 	/* execve succeeded */
-	write_lock(&current->fs->lock);
 	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
 	current->in_execve = 0;
 	mutex_unlock(&current->cred_exec_mutex);
 	acct_update_integrals(current);
@@ -1568,9 +1568,8 @@ out_file:
 	}
 
 out_unmark:
-	write_lock(&current->fs->lock);
-	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
+	if (clear_in_exec)
+		current->fs->in_exec = 0;
 
 out_unlock:
 	current->in_execve = 0;
diff --git a/fs/exec.c b/fs/exec.c
index 052a961e41a..a2e6989dbc3 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1077,9 +1077,11 @@ int check_unsafe_exec(struct linux_binprm *bprm)
 	if (p->fs->users > n_fs) {
 		bprm->unsafe |= LSM_UNSAFE_SHARE;
 	} else {
-		if (p->fs->in_exec)
-			res = -EAGAIN;
-		p->fs->in_exec = 1;
+		res = -EAGAIN;
+		if (!p->fs->in_exec) {
+			p->fs->in_exec = 1;
+			res = 1;
+		}
 	}
 
 	unlock_task_sighand(p, &flags);
@@ -1284,6 +1286,7 @@ int do_execve(char * filename,
 	struct linux_binprm *bprm;
 	struct file *file;
 	struct files_struct *displaced;
+	bool clear_in_exec;
 	int retval;
 
 	retval = unshare_files(&displaced);
@@ -1306,8 +1309,9 @@ int do_execve(char * filename,
 		goto out_unlock;
 
 	retval = check_unsafe_exec(bprm);
-	if (retval)
+	if (retval < 0)
 		goto out_unlock;
+	clear_in_exec = retval;
 
 	file = open_exec(filename);
 	retval = PTR_ERR(file);
@@ -1355,9 +1359,7 @@ int do_execve(char * filename,
 		goto out;
 
 	/* execve succeeded */
-	write_lock(&current->fs->lock);
 	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
 	current->in_execve = 0;
 	mutex_unlock(&current->cred_exec_mutex);
 	acct_update_integrals(current);
@@ -1377,9 +1379,8 @@ out_file:
 	}
 
 out_unmark:
-	write_lock(&current->fs->lock);
-	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
+	if (clear_in_exec)
+		current->fs->in_exec = 0;
 
 out_unlock:
 	current->in_execve = 0;
-- 
GitLab


From 437f7fdb607f32b737e4da9f14bebcfdac2c90c3 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Fri, 24 Apr 2009 01:02:45 +0200
Subject: [PATCH 0817/1421] check_unsafe_exec:
 s/lock_task_sighand/rcu_read_lock/

write_lock(&current->fs->lock) guarantees we can't wrongly miss
LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock()
instead of ->siglock to iterate over the sub-threads. We must see
all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it
takes fs->lock too.

With or without this patch we can miss the freshly cloned thread
and set LSM_UNSAFE_SHARE, we don't care.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
[ Fixed lock/unlock typo  - Hugh ]
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index a2e6989dbc3..a3a8ce83940 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1060,7 +1060,6 @@ EXPORT_SYMBOL(install_exec_creds);
 int check_unsafe_exec(struct linux_binprm *bprm)
 {
 	struct task_struct *p = current, *t;
-	unsigned long flags;
 	unsigned n_fs;
 	int res = 0;
 
@@ -1068,11 +1067,12 @@ int check_unsafe_exec(struct linux_binprm *bprm)
 
 	n_fs = 1;
 	write_lock(&p->fs->lock);
-	lock_task_sighand(p, &flags);
+	rcu_read_lock();
 	for (t = next_thread(p); t != p; t = next_thread(t)) {
 		if (t->fs == p->fs)
 			n_fs++;
 	}
+	rcu_read_unlock();
 
 	if (p->fs->users > n_fs) {
 		bprm->unsafe |= LSM_UNSAFE_SHARE;
@@ -1083,8 +1083,6 @@ int check_unsafe_exec(struct linux_binprm *bprm)
 			res = 1;
 		}
 	}
-
-	unlock_task_sighand(p, &flags);
 	write_unlock(&p->fs->lock);
 
 	return res;
-- 
GitLab


From 418df63c2d94f238ac7e1d1d53be35dd6b7a7252 Mon Sep 17 00:00:00 2001
From: Jonathan Corbet <corbet@lwn.net>
Date: Wed, 22 Apr 2009 12:01:49 +0100
Subject: [PATCH 0818/1421] Delete slow-work timers properly

Slow-work appears to delete its timer as soon as the first user
unregisters, even though other users could be active.  At the same time, it
never seems to delete slow_work_oom_timer.  Arrange for both to happen in
the shutdown path.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/slow-work.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/slow-work.c b/kernel/slow-work.c
index cf2bc01186e..b28d19135f4 100644
--- a/kernel/slow-work.c
+++ b/kernel/slow-work.c
@@ -609,14 +609,14 @@ void slow_work_unregister_user(void)
 	if (slow_work_user_count == 0) {
 		printk(KERN_NOTICE "Slow work thread pool: Shutting down\n");
 		slow_work_threads_should_exit = true;
+		del_timer_sync(&slow_work_cull_timer);
+		del_timer_sync(&slow_work_oom_timer);
 		wake_up_all(&slow_work_thread_wq);
 		wait_for_completion(&slow_work_last_thread_exited);
 		printk(KERN_NOTICE "Slow work thread pool:"
 		       " Shut down complete\n");
 	}
 
-	del_timer_sync(&slow_work_cull_timer);
-
 	mutex_unlock(&slow_work_user_lock);
 }
 EXPORT_SYMBOL(slow_work_unregister_user);
-- 
GitLab


From 596a5c4e43b08e90c0cd788861f859bf7ed6eddc Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 22 Apr 2009 12:10:07 +0100
Subject: [PATCH 0819/1421] MN10300: Update the ASB2303 defconfig

Update the defconfig for the ASB2303 evaluation board.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/configs/asb2303_defconfig | 160 +++++++++++++++----------
 1 file changed, 94 insertions(+), 66 deletions(-)

diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig
index 3aa8906b3de..3acce23708b 100644
--- a/arch/mn10300/configs/asb2303_defconfig
+++ b/arch/mn10300/configs/asb2303_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Tue Feb 19 18:52:24 2008
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 11:13:22 2009
 #
 CONFIG_MN10300=y
 CONFIG_AM33=y
@@ -18,7 +18,6 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_BUG=y
 CONFIG_QUICKLIST=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_SUPPORTS_AOUT is not set
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HOTPLUG_CPU is not set
 CONFIG_HZ=1000
@@ -40,52 +39,58 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # Matsushita MN10300 system setup
@@ -107,7 +112,6 @@ CONFIG_INTERRUPT_VECTOR_BASE=0x90000000
 CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
 CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
 CONFIG_MN10300_CURRENT_IN_E2=y
 CONFIG_MN10300_USING_JTAG=y
 CONFIG_MN10300_RTC=y
@@ -135,13 +139,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # Power management options
@@ -152,11 +158,9 @@ CONFIG_VIRT_TO_BUS=y
 # Executable formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -194,8 +198,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -203,6 +205,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -212,7 +215,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -223,14 +228,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -255,6 +254,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -297,9 +297,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -318,15 +316,24 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 
 #
 # SCSI device support
@@ -334,7 +341,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -345,10 +352,15 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -358,6 +370,10 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -382,6 +398,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -403,6 +420,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -411,34 +429,43 @@ CONFIG_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -453,21 +480,17 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -480,21 +503,24 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -506,19 +532,17 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -535,12 +559,16 @@ CONFIG_SUNRPC=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -548,26 +576,26 @@ CONFIG_MAGIC_SYSRQ=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-
-#
-# Profiling support
-#
+CONFIG_NLATTR=y
-- 
GitLab


From 67cd724f6d0919072a284f150a5761a160ac5cfa Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 22 Apr 2009 15:02:23 +0100
Subject: [PATCH 0820/1421] cafe_nand: Fix warning

Wrong types on IRQ handler

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mtd/nand/cafe_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 7c5b257ce8e..29acd06b1c3 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -332,7 +332,7 @@ static void cafe_select_chip(struct mtd_info *mtd, int chipnr)
 		cafe->ctl1 &= ~CTRL1_CHIPSELECT;
 }
 
-static int cafe_nand_interrupt(int irq, void *id)
+static irqreturn_t cafe_nand_interrupt(int irq, void *id)
 {
 	struct mtd_info *mtd = id;
 	struct cafe_priv *cafe = mtd->priv;
-- 
GitLab


From 79e95eba026944ec3353754f24e316d3aaa209fe Mon Sep 17 00:00:00 2001
From: Niels de Vos <niels.devos@wincor-nixdorf.com>
Date: Wed, 22 Apr 2009 15:02:44 +0100
Subject: [PATCH 0821/1421] serial: remove contact data

Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250_pci.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 7ddff3f5508..938bc1b6c3f 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -771,8 +771,6 @@ static int pci_netmos_init(struct pci_dev *dev)
 }
 
 /*
- * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
- *
  * These chips are available with optionally one parallel port and up to
  * two serial ports. Unfortunately they all have the same product id.
  *
-- 
GitLab


From ec5f5bf80501abfe2da2897cfcde8452b545aacb Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 22 Apr 2009 15:03:15 +0100
Subject: [PATCH 0822/1421] radio_si470x: Fix free memory corruption

The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...

Found by Dan Carpenter using Smatch

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/media/radio/radio-si470x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 92c297796a9..bd945d04dc9 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file)
 			video_unregister_device(radio->videodev);
 			kfree(radio->buffer);
 			kfree(radio);
-			goto unlock;
+			goto done;
 		}
 
 		/* stop rds reception */
-- 
GitLab


From 45cb50e646d1560eff01c5ad0f0df3c7fd6148dd Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Fri, 24 Apr 2009 12:13:18 -0400
Subject: [PATCH 0823/1421] ACPI video: dmi check for broken _BQC on Acer
 Aspire 5720

On Acer Aspire 5720, _BQC always returns a value 9 smaller than
the actual brightness level.  Add dmi quirk for this laptop.

http://bugzilla.kernel.org/show_bug.cgi?id=13121

Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb7543a9..7e8ee49ebd4 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -538,6 +538,33 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 	return -EINVAL;
 }
 
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+	bqc_offset_aml_bug_workaround = 9;
+	return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+	/*
+	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+	 */
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5720",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+		},
+	},
+	{}
+};
+
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 					unsigned long long *level)
@@ -557,6 +584,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 				*level = device->brightness->levels[*level + 2];
 
 			}
+			*level += bqc_offset_aml_bug_workaround;
 			device->brightness->curr = *level;
 			return 0;
 		} else {
@@ -2287,6 +2315,8 @@ EXPORT_SYMBOL(acpi_video_register);
 
 static int __init acpi_video_init(void)
 {
+	dmi_check_system(video_dmi_table);
+
 	if (intel_opregion_present())
 		return 0;
 
-- 
GitLab


From 485c26ec70f823f2a9cf45982b724893e53a859e Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Fri, 24 Apr 2009 13:43:20 -0400
Subject: [PATCH 0824/1421] ext4: Fix softlockup caused by illegal i_file_acl
 value in on-disk inode

If the block containing external extended attributes (which is stored
in i_file_acl and i_file_acl_high) is larger than the on-disk
filesystem, the process which tried to access the extended attributes
will endlessly issue kernel printks complaining that
"__find_get_block_slow() failed", locking up that CPU until the system
is forcibly rebooted.

So when we read in the inode, make sure the i_file_acl value is legal,
and if not, flag the filesystem as being corrupted.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c6bd6ced3bb..cab75bbcd57 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4409,7 +4409,17 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 			(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
 	}
 
-	if (ei->i_flags & EXT4_EXTENTS_FL) {
+	if (ei->i_file_acl &&
+	    ((ei->i_file_acl < 
+	      (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
+	       EXT4_SB(sb)->s_gdb_count)) ||
+	     (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
+		ext4_error(sb, __func__,
+			   "bad extended attribute block %llu in inode #%lu",
+			   ei->i_file_acl, inode->i_ino);
+		ret = -EIO;
+		goto bad_inode;
+	} else if (ei->i_flags & EXT4_EXTENTS_FL) {
 		/* Validate extent which is part of inode */
 		ret = ext4_ext_check_inode(inode);
  	} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
-- 
GitLab


From 97e728d4353f38c87bf0804cdfd79a9b13fc2c3e Mon Sep 17 00:00:00 2001
From: Josef Bacik <jbacik@redhat.com>
Date: Tue, 21 Apr 2009 17:40:57 -0400
Subject: [PATCH 0825/1421] Btrfs: try to keep a healthy ratio of metadata vs
 data block groups

This patch makes the chunk allocator keep a good ratio of metadata vs data
block groups.  By default for every 8 data block groups, we'll allocate 1
metadata chunk, or about 12% of the disk will be allocated for metadata.  This
can be changed by specifying the metadata_ratio mount option.

This is simply the number of data block groups that have to be allocated to
force a metadata chunk allocation.  By making sure we allocate metadata chunks
more often, we are less likely to get into situations where the whole disk
has been allocated as data block groups.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ctree.h       |  3 +++
 fs/btrfs/disk-io.c     |  1 +
 fs/btrfs/extent-tree.c | 28 +++++++++++++++++++++++++++-
 fs/btrfs/super.c       | 12 +++++++++++-
 4 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index ad96495dedc..213535f45da 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -881,6 +881,9 @@ struct btrfs_fs_info {
 	u64 metadata_alloc_profile;
 	u64 system_alloc_profile;
 
+	unsigned data_chunk_allocations;
+	unsigned metadata_ratio;
+
 	void *bdev_holder;
 };
 
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a6b83744b05..44c94d808e2 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1604,6 +1604,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->btree_inode = new_inode(sb);
 	fs_info->btree_inode->i_ino = 1;
 	fs_info->btree_inode->i_nlink = 1;
+	fs_info->metadata_ratio = 8;
 
 	fs_info->thread_pool_size = min_t(unsigned long,
 					  num_online_cpus() + 2, 8);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 178df4c67de..2895a837323 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -1918,15 +1918,29 @@ void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
 	spin_unlock(&info->lock);
 }
 
+static void force_metadata_allocation(struct btrfs_fs_info *info)
+{
+	struct list_head *head = &info->space_info;
+	struct btrfs_space_info *found;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(found, head, list) {
+		if (found->flags & BTRFS_BLOCK_GROUP_METADATA)
+			found->force_alloc = 1;
+	}
+	rcu_read_unlock();
+}
+
 static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *extent_root, u64 alloc_bytes,
 			  u64 flags, int force)
 {
 	struct btrfs_space_info *space_info;
+	struct btrfs_fs_info *fs_info = extent_root->fs_info;
 	u64 thresh;
 	int ret = 0;
 
-	mutex_lock(&extent_root->fs_info->chunk_mutex);
+	mutex_lock(&fs_info->chunk_mutex);
 
 	flags = btrfs_reduce_alloc_profile(extent_root, flags);
 
@@ -1958,6 +1972,18 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 	}
 	spin_unlock(&space_info->lock);
 
+	/*
+	 * if we're doing a data chunk, go ahead and make sure that
+	 * we keep a reasonable number of metadata chunks allocated in the
+	 * FS as well.
+	 */
+	if (flags & BTRFS_BLOCK_GROUP_DATA) {
+		fs_info->data_chunk_allocations++;
+		if (!(fs_info->data_chunk_allocations %
+		      fs_info->metadata_ratio))
+			force_metadata_allocation(fs_info);
+	}
+
 	ret = btrfs_alloc_chunk(trans, extent_root, flags);
 	if (ret)
 		space_info->full = 1;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9744af9d71e..30c9a8ca2a5 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -68,7 +68,7 @@ enum {
 	Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
 	Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
 	Opt_ssd, Opt_thread_pool, Opt_noacl,  Opt_compress, Opt_notreelog,
-	Opt_flushoncommit, Opt_err,
+	Opt_ratio, Opt_flushoncommit, Opt_err,
 };
 
 static match_table_t tokens = {
@@ -87,6 +87,7 @@ static match_table_t tokens = {
 	{Opt_noacl, "noacl"},
 	{Opt_notreelog, "notreelog"},
 	{Opt_flushoncommit, "flushoncommit"},
+	{Opt_ratio, "metadata_ratio=%d"},
 	{Opt_err, NULL},
 };
 
@@ -234,6 +235,15 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			printk(KERN_INFO "btrfs: turning on flush-on-commit\n");
 			btrfs_set_opt(info->mount_opt, FLUSHONCOMMIT);
 			break;
+		case Opt_ratio:
+			intarg = 0;
+			match_int(&args[0], &intarg);
+			if (intarg) {
+				info->metadata_ratio = intarg;
+				printk(KERN_INFO "btrfs: metadata ratio %d\n",
+				       info->metadata_ratio);
+			}
+			break;
 		default:
 			break;
 		}
-- 
GitLab


From 2ea2544ef5dad5cac52f1e4c7b812631274fc1cb Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 13 Apr 2009 15:32:28 +0200
Subject: [PATCH 0826/1421] Btrfs: simplify makefile

Get rid of the hacks for building out of tree, and always use += for
assigning to the object lists.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/Makefile | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile
index 9adf5e4f7e9..94212844a9b 100644
--- a/fs/btrfs/Makefile
+++ b/fs/btrfs/Makefile
@@ -1,25 +1,10 @@
-ifneq ($(KERNELRELEASE),)
-# kbuild part of makefile
 
 obj-$(CONFIG_BTRFS_FS) := btrfs.o
-btrfs-y := super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
+
+btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
 	   file-item.o inode-item.o inode-map.o disk-io.o \
 	   transaction.o inode.o file.o tree-defrag.o \
 	   extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
 	   extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
 	   ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \
 	   compression.o delayed-ref.o
-else
-
-# Normal Makefile
-
-KERNELDIR := /lib/modules/`uname -r`/build
-all:
-	$(MAKE) -C $(KERNELDIR) M=`pwd` CONFIG_BTRFS_FS=m modules
-
-modules_install:
-	$(MAKE) -C $(KERNELDIR) M=`pwd` modules_install
-clean:
-	$(MAKE) -C $(KERNELDIR) M=`pwd` clean
-
-endif
-- 
GitLab


From 0d4bf11e5309eff64272a49e1ea55658372abc56 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 13 Apr 2009 15:33:56 +0200
Subject: [PATCH 0827/1421] Btrfs: don't export symbols

Currently the extent_map code is only for btrfs so don't export it's
symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent_map.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index b187917b36f..9827fa1de4e 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -43,7 +43,6 @@ void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask)
 	tree->map.rb_node = NULL;
 	spin_lock_init(&tree->lock);
 }
-EXPORT_SYMBOL(extent_map_tree_init);
 
 /**
  * alloc_extent_map - allocate new extent map structure
@@ -64,7 +63,6 @@ struct extent_map *alloc_extent_map(gfp_t mask)
 	atomic_set(&em->refs, 1);
 	return em;
 }
-EXPORT_SYMBOL(alloc_extent_map);
 
 /**
  * free_extent_map - drop reference count of an extent_map
@@ -83,7 +81,6 @@ void free_extent_map(struct extent_map *em)
 		kmem_cache_free(extent_map_cache, em);
 	}
 }
-EXPORT_SYMBOL(free_extent_map);
 
 static struct rb_node *tree_insert(struct rb_root *root, u64 offset,
 				   struct rb_node *node)
@@ -264,7 +261,6 @@ int add_extent_mapping(struct extent_map_tree *tree,
 out:
 	return ret;
 }
-EXPORT_SYMBOL(add_extent_mapping);
 
 /* simple helper to do math around the end of an extent, handling wrap */
 static u64 range_end(u64 start, u64 len)
@@ -326,7 +322,6 @@ found:
 out:
 	return em;
 }
-EXPORT_SYMBOL(lookup_extent_mapping);
 
 /**
  * remove_extent_mapping - removes an extent_map from the extent tree
@@ -346,4 +341,3 @@ int remove_extent_mapping(struct extent_map_tree *tree, struct extent_map *em)
 	em->in_tree = 0;
 	return ret;
 }
-EXPORT_SYMBOL(remove_extent_mapping);
-- 
GitLab


From 9601e3f6336f6ca66929f451b1f66085e68e36e3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 13 Apr 2009 15:33:09 +0200
Subject: [PATCH 0828/1421] Btrfs: kill btrfs_cache_create

Just use kmem_cache_create directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent_io.c  | 18 ++++++------------
 fs/btrfs/extent_map.c | 11 +++--------
 fs/btrfs/inode.c      | 42 +++++++++++++++++++-----------------------
 3 files changed, 28 insertions(+), 43 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 05a1c42e25b..c33b54029d7 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -17,12 +17,6 @@
 #include "ctree.h"
 #include "btrfs_inode.h"
 
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
-				       unsigned long extra_flags,
-				       void (*ctor)(void *, struct kmem_cache *,
-						    unsigned long));
-
 static struct kmem_cache *extent_state_cache;
 static struct kmem_cache *extent_buffer_cache;
 
@@ -58,15 +52,15 @@ struct extent_page_data {
 
 int __init extent_io_init(void)
 {
-	extent_state_cache = btrfs_cache_create("extent_state",
-					    sizeof(struct extent_state), 0,
-					    NULL);
+	extent_state_cache = kmem_cache_create("extent_state",
+			sizeof(struct extent_state), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
 	if (!extent_state_cache)
 		return -ENOMEM;
 
-	extent_buffer_cache = btrfs_cache_create("extent_buffers",
-					    sizeof(struct extent_buffer), 0,
-					    NULL);
+	extent_buffer_cache = kmem_cache_create("extent_buffers",
+			sizeof(struct extent_buffer), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
 	if (!extent_buffer_cache)
 		goto free_state_cache;
 	return 0;
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 9827fa1de4e..30c9365861e 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -6,19 +6,14 @@
 #include <linux/hardirq.h>
 #include "extent_map.h"
 
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
-				       unsigned long extra_flags,
-				       void (*ctor)(void *, struct kmem_cache *,
-						    unsigned long));
 
 static struct kmem_cache *extent_map_cache;
 
 int __init extent_map_init(void)
 {
-	extent_map_cache = btrfs_cache_create("extent_map",
-					    sizeof(struct extent_map), 0,
-					    NULL);
+	extent_map_cache = kmem_cache_create("extent_map",
+			sizeof(struct extent_map), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
 	if (!extent_map_cache)
 		return -ENOMEM;
 	return 0;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 65219f6a16a..176b6cc28b1 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4640,39 +4640,35 @@ void btrfs_destroy_cachep(void)
 		kmem_cache_destroy(btrfs_path_cachep);
 }
 
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
-				       unsigned long extra_flags,
-				       void (*ctor)(void *))
-{
-	return kmem_cache_create(name, size, 0, (SLAB_RECLAIM_ACCOUNT |
-				 SLAB_MEM_SPREAD | extra_flags), ctor);
-}
-
 int btrfs_init_cachep(void)
 {
-	btrfs_inode_cachep = btrfs_cache_create("btrfs_inode_cache",
-					  sizeof(struct btrfs_inode),
-					  0, init_once);
+	btrfs_inode_cachep = kmem_cache_create("btrfs_inode_cache",
+			sizeof(struct btrfs_inode), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, init_once);
 	if (!btrfs_inode_cachep)
 		goto fail;
-	btrfs_trans_handle_cachep =
-			btrfs_cache_create("btrfs_trans_handle_cache",
-					   sizeof(struct btrfs_trans_handle),
-					   0, NULL);
+
+	btrfs_trans_handle_cachep = kmem_cache_create("btrfs_trans_handle_cache",
+			sizeof(struct btrfs_trans_handle), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
 	if (!btrfs_trans_handle_cachep)
 		goto fail;
-	btrfs_transaction_cachep = btrfs_cache_create("btrfs_transaction_cache",
-					     sizeof(struct btrfs_transaction),
-					     0, NULL);
+
+	btrfs_transaction_cachep = kmem_cache_create("btrfs_transaction_cache",
+			sizeof(struct btrfs_transaction), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
 	if (!btrfs_transaction_cachep)
 		goto fail;
-	btrfs_path_cachep = btrfs_cache_create("btrfs_path_cache",
-					 sizeof(struct btrfs_path),
-					 0, NULL);
+
+	btrfs_path_cachep = kmem_cache_create("btrfs_path_cache",
+			sizeof(struct btrfs_path), 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
 	if (!btrfs_path_cachep)
 		goto fail;
-	btrfs_bit_radix_cachep = btrfs_cache_create("btrfs_radix", 256,
-					      SLAB_DESTROY_BY_RCU, NULL);
+
+	btrfs_bit_radix_cachep = kmem_cache_create("btrfs_radix", 256, 0,
+			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD |
+			SLAB_DESTROY_BY_RCU, NULL);
 	if (!btrfs_bit_radix_cachep)
 		goto fail;
 	return 0;
-- 
GitLab


From e980b50cda1610f1c17978d9b7fd311a9dd93877 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Fri, 24 Apr 2009 14:39:24 -0400
Subject: [PATCH 0829/1421] Btrfs: fix fallocate deadlock on inode extent lock

The btrfs fallocate call takes an extent lock on the entire range
being fallocated, and then runs through insert_reserved_extent on each
extent as they are allocated.

The problem with this is that btrfs_drop_extents may decide to try
and take the same extent lock fallocate was already holding.  The solution
used here is to push down knowledge of the range that is already locked
going into btrfs_drop_extents.

It turns out that at least one other caller had the same bug.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ctree.h    |  3 ++-
 fs/btrfs/file.c     | 11 ++++++-----
 fs/btrfs/inode.c    | 27 ++++++++++++++++++---------
 fs/btrfs/ioctl.c    |  3 ++-
 fs/btrfs/tree-log.c |  2 +-
 5 files changed, 29 insertions(+), 17 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 213535f45da..4414a5d9983 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2177,7 +2177,8 @@ int btrfs_check_file(struct btrfs_root *root, struct inode *inode);
 extern struct file_operations btrfs_file_operations;
 int btrfs_drop_extents(struct btrfs_trans_handle *trans,
 		       struct btrfs_root *root, struct inode *inode,
-		       u64 start, u64 end, u64 inline_limit, u64 *hint_block);
+		       u64 start, u64 end, u64 locked_end,
+		       u64 inline_limit, u64 *hint_block);
 int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *root,
 			      struct inode *inode, u64 start, u64 end);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 482f8db2cfd..da3ed965c95 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -363,15 +363,16 @@ out:
  */
 noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
 		       struct btrfs_root *root, struct inode *inode,
-		       u64 start, u64 end, u64 inline_limit, u64 *hint_byte)
+		       u64 start, u64 end, u64 locked_end,
+		       u64 inline_limit, u64 *hint_byte)
 {
 	u64 extent_end = 0;
-	u64 locked_end = end;
 	u64 search_start = start;
 	u64 leaf_start;
 	u64 ram_bytes = 0;
 	u64 orig_parent = 0;
 	u64 disk_bytenr = 0;
+	u64 orig_locked_end = locked_end;
 	u8 compression;
 	u8 encryption;
 	u16 other_encoding = 0;
@@ -684,9 +685,9 @@ next_slot:
 	}
 out:
 	btrfs_free_path(path);
-	if (locked_end > end) {
-		unlock_extent(&BTRFS_I(inode)->io_tree, end, locked_end - 1,
-			      GFP_NOFS);
+	if (locked_end > orig_locked_end) {
+		unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end,
+			      locked_end - 1, GFP_NOFS);
 	}
 	btrfs_check_file(root, inode);
 	return ret;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 176b6cc28b1..2fdb2995be6 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -234,7 +234,7 @@ static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans,
 	}
 
 	ret = btrfs_drop_extents(trans, root, inode, start,
-				 aligned_end, start, &hint_byte);
+				 aligned_end, aligned_end, start, &hint_byte);
 	BUG_ON(ret);
 
 	if (isize > actual_end)
@@ -1439,6 +1439,7 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
 				       struct inode *inode, u64 file_pos,
 				       u64 disk_bytenr, u64 disk_num_bytes,
 				       u64 num_bytes, u64 ram_bytes,
+				       u64 locked_end,
 				       u8 compression, u8 encryption,
 				       u16 other_encoding, int extent_type)
 {
@@ -1455,7 +1456,8 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
 
 	path->leave_spinning = 1;
 	ret = btrfs_drop_extents(trans, root, inode, file_pos,
-				 file_pos + num_bytes, file_pos, &hint);
+				 file_pos + num_bytes, locked_end,
+				 file_pos, &hint);
 	BUG_ON(ret);
 
 	ins.objectid = inode->i_ino;
@@ -1590,6 +1592,8 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
 						ordered_extent->disk_len,
 						ordered_extent->len,
 						ordered_extent->len,
+						ordered_extent->file_offset +
+						ordered_extent->len,
 						compressed, 0, 0,
 						BTRFS_FILE_EXTENT_REG);
 		BUG_ON(ret);
@@ -2877,6 +2881,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t size)
 			err = btrfs_drop_extents(trans, root, inode,
 						 cur_offset,
 						 cur_offset + hole_size,
+						 block_end,
 						 cur_offset, &hint_byte);
 			if (err)
 				break;
@@ -4968,7 +4973,7 @@ out_fail:
 
 static int prealloc_file_range(struct btrfs_trans_handle *trans,
 			       struct inode *inode, u64 start, u64 end,
-			       u64 alloc_hint, int mode)
+			       u64 locked_end, u64 alloc_hint, int mode)
 {
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_key ins;
@@ -4989,7 +4994,8 @@ static int prealloc_file_range(struct btrfs_trans_handle *trans,
 		ret = insert_reserved_file_extent(trans, inode,
 						  cur_offset, ins.objectid,
 						  ins.offset, ins.offset,
-						  ins.offset, 0, 0, 0,
+						  ins.offset, locked_end,
+						  0, 0, 0,
 						  BTRFS_FILE_EXTENT_PREALLOC);
 		BUG_ON(ret);
 		num_bytes -= ins.offset;
@@ -5018,6 +5024,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 	u64 alloc_start;
 	u64 alloc_end;
 	u64 alloc_hint = 0;
+	u64 locked_end;
 	u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
 	struct extent_map *em;
 	struct btrfs_trans_handle *trans;
@@ -5039,6 +5046,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 			goto out;
 	}
 
+	locked_end = alloc_end - 1;
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
 
@@ -5051,8 +5059,8 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		/* the extent lock is ordered inside the running
 		 * transaction
 		 */
-		lock_extent(&BTRFS_I(inode)->io_tree, alloc_start,
-			    alloc_end - 1, GFP_NOFS);
+		lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
+			    GFP_NOFS);
 		ordered = btrfs_lookup_first_ordered_extent(inode,
 							    alloc_end - 1);
 		if (ordered &&
@@ -5060,7 +5068,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		    ordered->file_offset < alloc_end) {
 			btrfs_put_ordered_extent(ordered);
 			unlock_extent(&BTRFS_I(inode)->io_tree,
-				      alloc_start, alloc_end - 1, GFP_NOFS);
+				      alloc_start, locked_end, GFP_NOFS);
 			btrfs_end_transaction(trans, BTRFS_I(inode)->root);
 
 			/*
@@ -5085,7 +5093,8 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 		last_byte = (last_byte + mask) & ~mask;
 		if (em->block_start == EXTENT_MAP_HOLE) {
 			ret = prealloc_file_range(trans, inode, cur_offset,
-					last_byte, alloc_hint, mode);
+					last_byte, locked_end + 1,
+					alloc_hint, mode);
 			if (ret < 0) {
 				free_extent_map(em);
 				break;
@@ -5101,7 +5110,7 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 			break;
 		}
 	}
-	unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1,
+	unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
 		      GFP_NOFS);
 
 	btrfs_end_transaction(trans, BTRFS_I(inode)->root);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 7594bec1be1..f4e5d2e5ece 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -830,7 +830,8 @@ static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 	BUG_ON(!trans);
 
 	/* punch hole in destination first */
-	btrfs_drop_extents(trans, root, inode, off, off+len, 0, &hint_byte);
+	btrfs_drop_extents(trans, root, inode, off, off + len,
+			   off + len, 0, &hint_byte);
 
 	/* clone data */
 	key.objectid = src->i_ino;
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 25f20ea11f2..db5e212e844 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -536,7 +536,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans,
 	saved_nbytes = inode_get_bytes(inode);
 	/* drop any overlapping extents */
 	ret = btrfs_drop_extents(trans, root, inode,
-			 start, extent_end, start, &alloc_hint);
+			 start, extent_end, extent_end, start, &alloc_hint);
 	BUG_ON(ret);
 
 	if (found_type == BTRFS_FILE_EXTENT_REG ||
-- 
GitLab


From 59bc5c758ece00fb0b2a170dd8fbbf31f1856c8a Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Fri, 24 Apr 2009 14:39:25 -0400
Subject: [PATCH 0830/1421] Btrfs: fix deadlocks and stalls on dead root
 removal

After a transaction commit, the old root of the subvol btrees are sent through
snapshot removal.  This is what actually frees up any blocks replaced by
COW, and anything the old blocks pointed to.

Snapshot deletion will pause when a transaction commit has started, which
helps to avoid a huge amount of delayed reference count updates piling up
as the transaction is trying to close.

But, this pause happens after the snapshot deletion process has asked other
procs on the system to throttle back a bit so that it can make progress.

We don't want to throttle everyone while we're waiting for the transaction
commit, it leads to deadlocks in the user transaction ioctls used by Ceph
and makes things slower in general.

This patch changes things to avoid the throttling while we sleep.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/transaction.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 2869b3361eb..01b143605ec 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -687,7 +687,13 @@ static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info)
 		prepare_to_wait(&info->transaction_wait, &wait,
 				TASK_UNINTERRUPTIBLE);
 		mutex_unlock(&info->trans_mutex);
+
+		atomic_dec(&info->throttles);
+		wake_up(&info->transaction_throttle);
+
 		schedule();
+
+		atomic_inc(&info->throttles);
 		mutex_lock(&info->trans_mutex);
 		finish_wait(&info->transaction_wait, &wait);
 	}
-- 
GitLab


From a9e817425dc0baede8ebe5fbc9984a640257432b Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Fri, 24 Apr 2009 16:11:18 -0400
Subject: [PATCH 0831/1421] ext4: Ignore i_file_acl_high unless
 EXT4_FEATURE_INCOMPAT_64BIT is present

Don't try to look at i_file_acl_high unless the INCOMPAT_64BIT feature
bit is set.  The field is normally zero, but older versions of e2fsck
didn't automatically check to make sure of this, so in the spirit of
"be liberal in what you accept", don't look at i_file_acl_high unless
we are using a 64-bit filesystem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index cab75bbcd57..11460037ea9 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4357,11 +4357,9 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 	ei->i_flags = le32_to_cpu(raw_inode->i_flags);
 	inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
 	ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
-	if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
-	    cpu_to_le32(EXT4_OS_HURD)) {
+	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT))
 		ei->i_file_acl |=
 			((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
-	}
 	inode->i_size = ext4_isize(raw_inode);
 	ei->i_disksize = inode->i_size;
 	inode->i_generation = le32_to_cpu(raw_inode->i_generation);
-- 
GitLab


From e5b89542ea18020961882228c26db3ba87f6e608 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 23 Apr 2009 16:42:59 +0930
Subject: [PATCH 0832/1421] virtio-rng: Remove false BUG for spurious callbacks

The virtio-rng drivers checks for spurious callbacks. Since
callbacks can be implemented via shared interrupts (e.g. PCI) this
could lead to guest kernel oopses with lots of virtio devices.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/hw_random/virtio-rng.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index d0e563e4fc3..86e83f88313 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -37,9 +37,9 @@ static void random_recv_done(struct virtqueue *vq)
 {
 	int len;
 
-	/* We never get spurious callbacks. */
+	/* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
 	if (!vq->vq_ops->get_buf(vq, &len))
-		BUG();
+		return;
 
 	data_left = len / sizeof(random_data[0]);
 	complete(&have_data);
-- 
GitLab


From 91ac033d8377552d3654501a105ab55bf546940e Mon Sep 17 00:00:00 2001
From: Marc Dionne <marc.c.dionne@gmail.com>
Date: Thu, 23 Apr 2009 11:21:55 +0100
Subject: [PATCH 0833/1421] CacheFiles: Fix the documentation to use the
 correct credential pointer names

Adjust the CacheFiles documentation to use the correct names of the credential
pointers in task_struct.

The documentation was using names from the old versions of the credentials
patches.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/caching/cachefiles.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt
index c78a49b7bba..748a1ae49e1 100644
--- a/Documentation/filesystems/caching/cachefiles.txt
+++ b/Documentation/filesystems/caching/cachefiles.txt
@@ -407,7 +407,7 @@ A NOTE ON SECURITY
 ==================
 
 CacheFiles makes use of the split security in the task_struct.  It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
 when it acts on behalf of another process, in that process's context.
 
 The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what
 the process looks like in /proc.
 
 So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as).  The
-objective security holds the intrinsic security properties of a process and is
-never overridden.  This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden.  This is what appears in /proc, and is what is used when a
 process is the target of an operation by some other process (SIGKILL for
 example).
 
-- 
GitLab


From a5422a5111811401f7756345e4c237ff06cf6d1e Mon Sep 17 00:00:00 2001
From: Fred Isaman <iisaman@citi.umich.edu>
Date: Thu, 23 Apr 2009 16:40:32 +0300
Subject: [PATCH 0834/1421] lib: find_last_bit.o needed by a module only, move
 it from lib to obj

Currently, although find_last_bit is EXPORTed, it is statically linked
with the kernel and is referenced only under CONFIG_SMP.

When CONFIG_SMP is undefined and find_last_bit is referenced only by
modules, linking fails with:

  ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined!

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/Makefile b/lib/Makefile
index d6edd6753f4..33a40e40e3e 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -38,7 +38,7 @@ lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
 lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
 lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o
 lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
+obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
 obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
 obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
 obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
-- 
GitLab


From 84baf74bf23bbe9f3deafb5d2f27e2b5dc0bc052 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 23 Apr 2009 16:41:13 +0100
Subject: [PATCH 0835/1421] ROMFS: romfs_lookup() shouldn't be doing a partial
 name comparison

romfs_lookup() should be using a routine akin to strcmp() on the backing store,
rather than one akin to strncmp().  If it uses the latter, it's liable to match
/bin/shutdown when looking up /bin/sh.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/romfs/internal.h |  4 +--
 fs/romfs/storage.c  | 67 +++++++++++++++++++++++++++++++++------------
 fs/romfs/super.c    |  4 +--
 3 files changed, 53 insertions(+), 22 deletions(-)

diff --git a/fs/romfs/internal.h b/fs/romfs/internal.h
index 06044a9dc62..95217b83011 100644
--- a/fs/romfs/internal.h
+++ b/fs/romfs/internal.h
@@ -43,5 +43,5 @@ extern int romfs_dev_read(struct super_block *sb, unsigned long pos,
 			  void *buf, size_t buflen);
 extern ssize_t romfs_dev_strnlen(struct super_block *sb,
 				 unsigned long pos, size_t maxlen);
-extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
-			     const char *str, size_t size);
+extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+			    const char *str, size_t size);
diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c
index 7e3e1e12a08..66ce9ddfe50 100644
--- a/fs/romfs/storage.c
+++ b/fs/romfs/storage.c
@@ -67,26 +67,35 @@ static ssize_t romfs_mtd_strnlen(struct super_block *sb,
  * compare a string to one in a romfs image on MTD
  * - return 1 if matched, 0 if differ, -ve if error
  */
-static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos,
-			     const char *str, size_t size)
+static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos,
+			    const char *str, size_t size)
 {
-	u_char buf[16];
+	u_char buf[17];
 	size_t len, segment;
 	int ret;
 
-	/* scan the string up to 16 bytes at a time */
+	/* scan the string up to 16 bytes at a time, and attempt to grab the
+	 * trailing NUL whilst we're at it */
+	buf[0] = 0xff;
+
 	while (size > 0) {
-		segment = min_t(size_t, size, 16);
+		segment = min_t(size_t, size + 1, 17);
 		ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf);
 		if (ret < 0)
 			return ret;
+		len--;
 		if (memcmp(buf, str, len) != 0)
 			return 0;
+		buf[0] = buf[len];
 		size -= len;
 		pos += len;
 		str += len;
 	}
 
+	/* check the trailing NUL was */
+	if (buf[0])
+		return 0;
+
 	return 1;
 }
 #endif /* CONFIG_ROMFS_ON_MTD */
@@ -154,28 +163,48 @@ static ssize_t romfs_blk_strnlen(struct super_block *sb,
  * compare a string to one in a romfs image on a block device
  * - return 1 if matched, 0 if differ, -ve if error
  */
-static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos,
-			     const char *str, size_t size)
+static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos,
+			    const char *str, size_t size)
 {
 	struct buffer_head *bh;
 	unsigned long offset;
 	size_t segment;
-	bool x;
+	bool matched, terminated = false;
 
-	/* scan the string up to 16 bytes at a time */
+	/* compare string up to a block at a time */
 	while (size > 0) {
 		offset = pos & (ROMBSIZE - 1);
 		segment = min_t(size_t, size, ROMBSIZE - offset);
 		bh = sb_bread(sb, pos >> ROMBSBITS);
 		if (!bh)
 			return -EIO;
-		x = (memcmp(bh->b_data + offset, str, segment) != 0);
-		brelse(bh);
-		if (x)
-			return 0;
+		matched = (memcmp(bh->b_data + offset, str, segment) == 0);
+
 		size -= segment;
 		pos += segment;
 		str += segment;
+		if (matched && size == 0 && offset + segment < ROMBSIZE) {
+			if (!bh->b_data[offset + segment])
+				terminated = true;
+			else
+				matched = false;
+		}
+		brelse(bh);
+		if (!matched)
+			return 0;
+	}
+
+	if (!terminated) {
+		/* the terminating NUL must be on the first byte of the next
+		 * block */
+		BUG_ON((pos & (ROMBSIZE - 1)) != 0);
+		bh = sb_bread(sb, pos >> ROMBSBITS);
+		if (!bh)
+			return -EIO;
+		matched = !bh->b_data[0];
+		brelse(bh);
+		if (!matched)
+			return 0;
 	}
 
 	return 1;
@@ -234,10 +263,12 @@ ssize_t romfs_dev_strnlen(struct super_block *sb,
 
 /*
  * compare a string to one in romfs
+ * - the string to be compared to, str, may not be NUL-terminated; instead the
+ *   string is of the specified size
  * - return 1 if matched, 0 if differ, -ve if error
  */
-int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
-		      const char *str, size_t size)
+int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+		     const char *str, size_t size)
 {
 	size_t limit;
 
@@ -246,16 +277,16 @@ int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
 		return -EIO;
 	if (size > ROMFS_MAXFN)
 		return -ENAMETOOLONG;
-	if (size > limit - pos)
+	if (size + 1 > limit - pos)
 		return -EIO;
 
 #ifdef CONFIG_ROMFS_ON_MTD
 	if (sb->s_mtd)
-		return romfs_mtd_strncmp(sb, pos, str, size);
+		return romfs_mtd_strcmp(sb, pos, str, size);
 #endif
 #ifdef CONFIG_ROMFS_ON_BLOCK
 	if (sb->s_bdev)
-		return romfs_blk_strncmp(sb, pos, str, size);
+		return romfs_blk_strcmp(sb, pos, str, size);
 #endif
 	return -EIO;
 }
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index 10ca7d984a8..c53b5ef8a02 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -240,8 +240,8 @@ static struct dentry *romfs_lookup(struct inode *dir, struct dentry *dentry,
 			goto error;
 
 		/* try to match the first 16 bytes of name */
-		ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name,
-					len);
+		ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name,
+				       len);
 		if (ret < 0)
 			goto error;
 		if (ret == 1)
-- 
GitLab


From 4b2b0b9753194cad44d7295c32044b89710efd70 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 23 Apr 2009 16:41:18 +0100
Subject: [PATCH 0836/1421] ROMFS: Advance destination buffer pointer when
 reading from a blockdev

RomFS should advance the destination buffer pointer when reading data from a
blockdev source (the data may be split over multiple blocks, each requiring its
own sb_read() call).  Without this, all the data is copied to the beginning of
the output buffer.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/romfs/storage.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c
index 66ce9ddfe50..b3208adf8e7 100644
--- a/fs/romfs/storage.c
+++ b/fs/romfs/storage.c
@@ -120,6 +120,7 @@ static int romfs_blk_read(struct super_block *sb, unsigned long pos,
 			return -EIO;
 		memcpy(buf, bh->b_data + offset, segment);
 		brelse(bh);
+		buf += segment;
 		buflen -= segment;
 		pos += segment;
 	}
-- 
GitLab


From 6b9ff696ba1176b6fca78d01fc590dd4335c8743 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 24 Apr 2009 12:01:47 -0700
Subject: [PATCH 0837/1421] Input: lifebook - add DMI entry for Fujitsu B-2130

Although we already have entry for ZEPHYR the match is done
on product name whereas B-2130 BIOS has it in board name.

Reported-by: Yuriy Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/lifebook.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index df81b0aaa9f..15ac3205ac0 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -60,6 +60,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
 		},
 	},
+	{
+		.ident = "Lifebook B-2130",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
+		},
+	},
 	{
 		.ident = "Lifebook B213x/B2150",
 		.matches = {
-- 
GitLab


From 0c8454f56623505a99463405fd7d5664adfbb094 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 25 Apr 2009 00:16:06 +0200
Subject: [PATCH 0838/1421] PM/Hibernate: Fix waiting for image device to
 appear on resume

Commit c751085943362143f84346d274e0011419c84202 ("PM/Hibernate: Wait for
SCSI devices scan to complete during resume") added a call to
scsi_complete_async_scans() to software_resume(), so that it waited for
the SCSI scanning to complete, but the call was added at a wrong place.

Namely, it should have been added after wait_for_device_probe(), which
is called only if the image partition hasn't been specified yet.  Also,
it's reasonable to check if the image partition is present and only wait
for the device probing and SCSI scanning to complete if it is not the
case.

Additionally, since noresume is checked right at the beginning of
software_resume() and the function returns immediately if it's set, it
doesn't make sense to check it once again later.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/disk.c | 51 ++++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 24 deletions(-)

diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 0854770b63b..e71ca9cd81b 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -645,13 +645,6 @@ static int software_resume(void)
 	if (noresume)
 		return 0;
 
-	/*
-	 * We can't depend on SCSI devices being available after loading one of
-	 * their modules if scsi_complete_async_scans() is not called and the
-	 * resume device usually is a SCSI one.
-	 */
-	scsi_complete_async_scans();
-
 	/*
 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
 	 * is configured into the kernel. Since the regular hibernate
@@ -663,32 +656,42 @@ static int software_resume(void)
 	 * here to avoid lockdep complaining.
 	 */
 	mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
+
+	if (swsusp_resume_device)
+		goto Check_image;
+
+	if (!strlen(resume_file)) {
+		error = -ENOENT;
+		goto Unlock;
+	}
+
+	pr_debug("PM: Checking image partition %s\n", resume_file);
+
+	/* Check if the device is there */
+	swsusp_resume_device = name_to_dev_t(resume_file);
 	if (!swsusp_resume_device) {
-		if (!strlen(resume_file)) {
-			mutex_unlock(&pm_mutex);
-			return -ENOENT;
-		}
 		/*
 		 * Some device discovery might still be in progress; we need
 		 * to wait for this to finish.
 		 */
 		wait_for_device_probe();
+		/*
+		 * We can't depend on SCSI devices being available after loading
+		 * one of their modules until scsi_complete_async_scans() is
+		 * called and the resume device usually is a SCSI one.
+		 */
+		scsi_complete_async_scans();
+
 		swsusp_resume_device = name_to_dev_t(resume_file);
-		pr_debug("PM: Resume from partition %s\n", resume_file);
-	} else {
-		pr_debug("PM: Resume from partition %d:%d\n",
-				MAJOR(swsusp_resume_device),
-				MINOR(swsusp_resume_device));
+		if (!swsusp_resume_device) {
+			error = -ENODEV;
+			goto Unlock;
+		}
 	}
 
-	if (noresume) {
-		/**
-		 * FIXME: If noresume is specified, we need to find the
-		 * partition and reset it back to normal swap space.
-		 */
-		mutex_unlock(&pm_mutex);
-		return 0;
-	}
+ Check_image:
+	pr_debug("PM: Resume from partition %d:%d\n",
+		MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
 
 	pr_debug("PM: Checking hibernation image.\n");
 	error = swsusp_check();
-- 
GitLab


From c4b5a614316c505922a522b2e35ba05ea3e08a7c Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Fri, 24 Apr 2009 18:45:35 -0400
Subject: [PATCH 0839/1421] ext4: Do not try to validate extents on special
 files

The EXTENTS_FL flag should never be set on special files, but if it
is, don't bother trying to validate that the extents tree is valid,
since only files, directories, and non-fast symlinks will ever have an
extent data structure.  We perhaps should flag the filesystem as being
corrupted if we see a special file (named pipes, device nodes, Unix
domain sockets, etc.) with the EXTENTS_FL flag, but e2fsck doesn't
currently check this case, so we'll just ignore this for now, since
it's harmless.

Without this fix, a special device with the extents flag is flagged as
an error by the kernel, so it is impossible to access or delete the
inode, but e2fsck doesn't see it as a problem, leading to
confused/frustrated users.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 11460037ea9..e91f978c7f1 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4407,6 +4407,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 			(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
 	}
 
+	ret = 0;
 	if (ei->i_file_acl &&
 	    ((ei->i_file_acl < 
 	      (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
@@ -4418,8 +4419,11 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 		ret = -EIO;
 		goto bad_inode;
 	} else if (ei->i_flags & EXT4_EXTENTS_FL) {
-		/* Validate extent which is part of inode */
-		ret = ext4_ext_check_inode(inode);
+		if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+		    (S_ISLNK(inode->i_mode) &&
+		     !ext4_inode_is_fast_symlink(inode)))
+			/* Validate extent which is part of inode */
+			ret = ext4_ext_check_inode(inode);
  	} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 		   (S_ISLNK(inode->i_mode) &&
 		    !ext4_inode_is_fast_symlink(inode))) {
-- 
GitLab


From d0687be7c7ae21461da4438d5fd059b48487bfe1 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Fri, 3 Apr 2009 15:18:24 -0500
Subject: [PATCH 0840/1421] svcrdma: Fix dma map direction for rdma read
 targets

The nfs server rdma transport was mapping rdma read target pages for
TO_DEVICE instead of FROM_DEVICE.  This causes data corruption on non
cache-coherent systems if frmrs are used.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 629a28764da..42a6f9f2028 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -265,7 +265,7 @@ static int fast_reg_read_chunks(struct svcxprt_rdma *xprt,
 		frmr->page_list->page_list[page_no] =
 			ib_dma_map_single(xprt->sc_cm_id->device,
 					  page_address(rqstp->rq_arg.pages[page_no]),
-					  PAGE_SIZE, DMA_TO_DEVICE);
+					  PAGE_SIZE, DMA_FROM_DEVICE);
 		if (ib_dma_mapping_error(xprt->sc_cm_id->device,
 					 frmr->page_list->page_list[page_no]))
 			goto fatal_err;
-- 
GitLab


From 5876ee950f28612814cc4e01c5549718f8b79dce Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 26 Apr 2009 13:56:01 +0100
Subject: [PATCH 0841/1421] [ARM] lart: fix build error

arch/arm/mach-sa1100/lart.c:36: error: 'PAGE_SHIFT' undeclared here (not in a function)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/lart.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 0cd52692d2f..1f940df0e5a 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -9,6 +9,7 @@
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
+#include <asm/page.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-- 
GitLab


From c80d471a476b6d6fe0bc1fd25293c24c66b7aaaf Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:10:56 -0400
Subject: [PATCH 0842/1421] Add new HEAD_TEXT_SECTION macro.

This patch is preparation for replacing all uses of ".head.text" or
".text.head" in the kernel with macros, so that the section name can
later be changed without having to touch a lot of the kernel.

Since some linker scripts do more complex things than referencing
HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the
actual name.

I've defined HEAD_TEXT_SECTION in a new header,
include/linux/section-names.h, so that this section name only needs to
appear in one place.  I anticipate creating similar macro structures
for a number of other section names.

The long-term goal here is to be able to change the kernel's magic
section names to those that are compatible with -ffunction-sections
-fdata-sections.  This requires renaming all magic sections with names
of the form ".text.foo".

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/vmlinux.lds.h | 4 +++-
 include/linux/init.h              | 4 +++-
 include/linux/section-names.h     | 6 ++++++
 3 files changed, 12 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/section-names.h

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 7fa660fd449..eaa06ef6f7d 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -1,3 +1,5 @@
+#include <linux/section-names.h>
+
 #ifndef LOAD_OFFSET
 #define LOAD_OFFSET 0
 #endif
@@ -331,7 +333,7 @@
 #endif
 
 /* Section used for early init (in .S files) */
-#define HEAD_TEXT  *(.head.text)
+#define HEAD_TEXT  *(HEAD_TEXT_SECTION)
 
 /* init and exit section handling */
 #define INIT_DATA							\
diff --git a/include/linux/init.h b/include/linux/init.h
index f121a7a10c3..20a1334e34e 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -2,6 +2,8 @@
 #define _LINUX_INIT_H
 
 #include <linux/compiler.h>
+#include <linux/section-names.h>
+#include <linux/stringify.h>
 
 /* These macros are used to mark some functions or 
  * initialized data (doesn't apply to uninitialized data)
@@ -107,7 +109,7 @@
 #define __memexitconst   __section(.memexit.rodata)
 
 /* For assembly routines */
-#define __HEAD		.section	".head.text","ax"
+#define __HEAD		.section	__stringify(HEAD_TEXT_SECTION),"ax"
 #define __INIT		.section	".init.text","ax"
 #define __FINIT		.previous
 
diff --git a/include/linux/section-names.h b/include/linux/section-names.h
new file mode 100644
index 00000000000..c956f4eb2ad
--- /dev/null
+++ b/include/linux/section-names.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_SECTION_NAMES_H
+#define __LINUX_SECTION_NAMES_H
+
+#define HEAD_TEXT_SECTION .head.text
+
+#endif /* !__LINUX_SECTION_NAMES_H */
-- 
GitLab


From 0ebdcb4d0480d1b8219cf5f9eab0fb5d889af0ad Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:10:57 -0400
Subject: [PATCH 0843/1421] xtensa: convert to use __HEAD and HEAD_TEXT macros.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/xtensa/kernel/head.S        | 3 ++-
 arch/xtensa/kernel/vmlinux.lds.S | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 0817f9db836..d9ddc1ba761 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -19,6 +19,7 @@
 #include <asm/page.h>
 #include <asm/cacheasm.h>
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 
 /*
@@ -45,7 +46,7 @@
 	 * instruction.
 	 */
 
-	.section .head.text, "ax"
+	__HEAD
 	.globl _start
 _start:	_j	2f
 	.align	4
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index c1be9a4a740..5accf51053d 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -85,8 +85,8 @@ SECTIONS
 
   .text :
   {
-    /* The .head.text section must be the first section! */
-    *(.head.text)
+    /* The HEAD_TEXT section must be the first section! */
+    HEAD_TEXT
     *(.literal .text)
     VMLINUX_SYMBOL(__sched_text_start) = .;
     *(.sched.literal .sched.text)
-- 
GitLab


From 92ca52343ca503c1f957bd649df4ef914d5fc1e8 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:10:58 -0400
Subject: [PATCH 0844/1421] alpha: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/head.S        | 3 ++-
 arch/alpha/kernel/vmlinux.lds.S | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S
index 7ac1f1372c3..4bdd1d2ff35 100644
--- a/arch/alpha/kernel/head.S
+++ b/arch/alpha/kernel/head.S
@@ -7,10 +7,11 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
+#include <linux/init.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 
-.section .text.head, "ax"
+__HEAD
 .globl swapper_pg_dir
 .globl _stext
 swapper_pg_dir=SWAPPER_PGD
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index ef37fc1acae..b9d6568e5f7 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -16,7 +16,7 @@ SECTIONS
 
 	_text = .;	/* Text and read-only data */
 	.text : {
-	*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-- 
GitLab


From b6a8d95c95814079ded93c14c4b394015d8b65cd Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:10:59 -0400
Subject: [PATCH 0845/1421] frv: convert frv to use __HEAD and HEAD_TEXT
 macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/head.S        | 3 ++-
 arch/frv/kernel/vmlinux.lds.S | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S
index fecf751c5ca..b825ef3f2d5 100644
--- a/arch/frv/kernel/head.S
+++ b/arch/frv/kernel/head.S
@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
@@ -27,7 +28,7 @@
 #   command line string
 #
 ###############################################################################
-	.section	.text.head,"ax"
+	__HEAD
 	.balign		4
 
 	.globl		_boot, __head_reference
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index b95c4eace62..22d9787406e 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -26,7 +26,7 @@ SECTIONS
 
   _sinittext = .;
   .init.text : {
-	*(.text.head)
+	HEAD_TEXT
 #ifndef CONFIG_DEBUG_INFO
 	INIT_TEXT
 	EXIT_TEXT
-- 
GitLab


From 34963696629b6d1e0066a5f2e67993e409c9434b Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:02 -0400
Subject: [PATCH 0846/1421] m32r: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/kernel/head.S        | 2 +-
 arch/m32r/kernel/vmlinux.lds.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 90916067b9c..0a7194439eb 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-.section .text.head, "ax"
+__HEAD
 	.global	start_kernel
 	.global __bss_start
 	.global _end
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 9db05df20c0..4179adf6c62 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -27,7 +27,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
-- 
GitLab


From 6f335cab0431d5df4995bcd4fd952d4c746d5a86 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:03 -0400
Subject: [PATCH 0847/1421] m68k: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/kernel/head.S           | 2 +-
 arch/m68k/kernel/sun3-head.S      | 2 +-
 arch/m68k/kernel/vmlinux-std.lds  | 2 +-
 arch/m68k/kernel/vmlinux-sun3.lds | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index f513f530de9..86edb5fbcfc 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -577,7 +577,7 @@ func_define	putn,1
 #endif
 .endm
 
-.section ".text.head","ax"
+__HEAD
 ENTRY(_stext)
 /*
  * Version numbers of the bootinfo interface
diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S
index aad01592dbb..9e5c3e57c59 100644
--- a/arch/m68k/kernel/sun3-head.S
+++ b/arch/m68k/kernel/sun3-head.S
@@ -29,7 +29,7 @@ kernel_pmd_table:              .skip 0x2000
 .globl kernel_pg_dir
 .equ    kernel_pg_dir,kernel_pmd_table
 
-	.section .text.head
+	__HEAD
 ENTRY(_stext)
 ENTRY(_start)
 
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index f846d4e3e5e..01d212bb05a 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -12,7 +12,7 @@ SECTIONS
   . = 0x1000;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index d9368c0709b..c192f773db9 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -12,7 +12,7 @@ SECTIONS
   . = 0xE002000;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
-- 
GitLab


From 9760f8fc60766f8fde0ef5cf7df714c2ce864ab6 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:04 -0400
Subject: [PATCH 0848/1421] mn10300: convert to use __HEAD and HEAD_TEXT
 macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/head.S        | 3 ++-
 arch/mn10300/kernel/vmlinux.lds.S | 5 +----
 2 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
index 8a8309fbe3c..14f27f3bfaf 100644
--- a/arch/mn10300/kernel/head.S
+++ b/arch/mn10300/kernel/head.S
@@ -9,6 +9,7 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <linux/serial_reg.h>
@@ -19,7 +20,7 @@
 #include <asm/param.h>
 #include <unit/serial.h>
 
-	.section .text.head,"ax"
+	__HEAD
 
 ###############################################################################
 #
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index b8259668f7d..24de6b90f40 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -27,10 +27,7 @@ SECTIONS
   _stext = .;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(
-	.text.head
-	.text
-	)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
-- 
GitLab


From e70398458738fd26f96adc95eea8efe908809f08 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:05 -0400
Subject: [PATCH 0849/1421] powerpc: convert to use __HEAD and HEAD_TEXT
 macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/head_32.S        | 3 ++-
 arch/powerpc/kernel/head_40x.S       | 3 ++-
 arch/powerpc/kernel/head_44x.S       | 3 ++-
 arch/powerpc/kernel/head_8xx.S       | 3 ++-
 arch/powerpc/kernel/head_fsl_booke.S | 3 ++-
 arch/powerpc/kernel/vmlinux.lds.S    | 2 +-
 6 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 54e68c11ae1..c01467f952d 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -21,6 +21,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/reg.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -50,7 +51,7 @@
 	mtspr	SPRN_DBAT##n##L,RB;	\
 1:
 
-	.section	.text.head, "ax"
+	__HEAD
 	.stabs	"arch/powerpc/kernel/",N_SO,0,0,0f
 	.stabs	"head_32.S",N_SO,0,0,0f
 0:
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 56d8e5d90c5..0c96911d429 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -31,6 +31,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -52,7 +53,7 @@
  *
  * This is all going to change RSN when we add bi_recs.......  -- Dan
  */
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b56fecc93a1..18d8a1677c4 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -28,6 +28,7 @@
  * option) any later version.
  */
 
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -50,7 +51,7 @@
  *   r7 - End of kernel command line string
  *
  */
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 	/*
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 3c9452d4308..52ff8c53b93 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -19,6 +19,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -38,7 +39,7 @@
 #else
 #define DO_8xx_CPU6(val, reg)
 #endif
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 4c22620d009..5bdcc06d294 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -30,6 +30,7 @@
  * option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <asm/processor.h>
 #include <asm/page.h>
@@ -53,7 +54,7 @@
  *   r7 - End of kernel command line string
  *
  */
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 	/*
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index b9ef1644a72..d7425fffbc1 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -52,7 +52,7 @@ SECTIONS
 	/* Text and gots */
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		ALIGN_FUNCTION();
-		*(.text.head)
+		HEAD_TEXT
 		_text = .;
 		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
 		SCHED_TEXT
-- 
GitLab


From 2133bb8d8c691c08d47f16d5971ba98f0ac241bf Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:06 -0400
Subject: [PATCH 0850/1421] s390: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/s390/kernel/head.S        | 3 ++-
 arch/s390/kernel/vmlinux.lds.S | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index bba14494ee0..22596d70fc2 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -23,6 +23,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/setup.h>
 #include <asm/lowcore.h>
 #include <asm/asm-offsets.h>
@@ -35,7 +36,7 @@
 #define ARCH_OFFSET	0
 #endif
 
-.section ".text.head","ax"
+__HEAD
 #ifndef CONFIG_IPL
 	.org   0
 	.long  0x00080000,0x80000000+startup	# Just a restart PSW
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 7a2063eb88f..89399b8756c 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -29,8 +29,8 @@ SECTIONS
 	. = 0x00000000;
 	.text : {
 	_text = .;		/* Text and read-only data */
-		*(.text.head)
-	TEXT_TEXT
+		HEAD_TEXT
+		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
-- 
GitLab


From bbe215c231ac809e42b037345c1fa8e8eb09b00a Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:07 -0400
Subject: [PATCH 0851/1421] sh: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sh/kernel/head_32.S        | 3 ++-
 arch/sh/kernel/head_64.S        | 5 ++++-
 arch/sh/kernel/vmlinux_32.lds.S | 2 +-
 arch/sh/kernel/vmlinux_64.lds.S | 2 +-
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 788605ff708..a78be74b8d3 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -10,6 +10,7 @@
  *
  * Head.S contains the SH exception handlers and startup code.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 
@@ -40,7 +41,7 @@ ENTRY(empty_zero_page)
 1:
 	.skip	PAGE_SIZE - empty_zero_page - 1b
 
-	.section	.text.head, "ax"
+	__HEAD
 
 /*
  * Condition at the entry of _stext:
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index 7ccfb995a39..3ea765844c7 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -8,6 +8,9 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+
+#include <linux/init.h>
+
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
@@ -110,7 +113,7 @@ empty_bad_pte_table:
 fpu_in_use:	.quad	0
 
 
-	.section	.text.head, "ax"
+	__HEAD
 	.balign L1_CACHE_BYTES
 /*
  * Condition at the entry of __stext:
diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S
index d0b2a715cd1..dd9b2ee1312 100644
--- a/arch/sh/kernel/vmlinux_32.lds.S
+++ b/arch/sh/kernel/vmlinux_32.lds.S
@@ -31,7 +31,7 @@ SECTIONS
 	} = 0
 
 	.text : {
-		*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
index 33fa4645140..69664460c68 100644
--- a/arch/sh/kernel/vmlinux_64.lds.S
+++ b/arch/sh/kernel/vmlinux_64.lds.S
@@ -42,7 +42,7 @@ SECTIONS
 	} = 0
 
 	.text : C_PHYS(.text) {
-		*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		*(.text64)
 		*(.text..SHmedia32)
-- 
GitLab


From ce8a7424d23a36f043d0de8484f888971c831119 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Sat, 25 Apr 2009 22:11:08 -0400
Subject: [PATCH 0852/1421] sparc: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/kernel/head_32.S     | 2 +-
 arch/sparc/kernel/vmlinux.lds.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index f0b4b516304..e91f01a5759 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -72,7 +72,7 @@ sun4e_notsup:
 	.align 4
 
 	/* The Sparc trap table, bootloader gives us control at _start. */
-	.section .text.head,"ax"
+	__HEAD
 	.globl	start, _stext, _start, __stext
 	.globl  trapbase
 _start:   /* danger danger */
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index 76267085b13..fcbbd000ec0 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -41,7 +41,7 @@ SECTIONS
 	.text TEXTSTART :
 	{
 		_text = .;
-		*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-- 
GitLab


From 992d7ced75322307035a0e94074eb7188612a680 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 24 Apr 2009 23:10:06 +0800
Subject: [PATCH 0853/1421] locking: Documentation: lockdep-design.txt, fix
 note of state bits

From source code of get_usage_char(), the previous note is not correct,
so fix it.

static char get_usage_char(struct lock_class *class, enum lock_usage_bit bit)
{
	char c = '.';

	if (class->usage_mask & lock_flag(bit + 2))/*LOCK_ENABLED_##STATE*/
		c = '+';
	if (class->usage_mask & lock_flag(bit)) {/*LOCK_USED_IN_##STATE*/
		c = '-';
		if (class->usage_mask & lock_flag(bit + 2))
			c = '?';
	}

	return c;
}

note:

1) The 'bit' parameter always is passed as  LOCK_USED_IN_##STATE
   or LOCK_USED_IN_##STATE_READ , from get_usage_chars().

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
LKML-Reference: <1240585806-5744-1-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 Documentation/lockdep-design.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index 938ea22f2cc..e20d913d591 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
 The bit position indicates STATE, STATE-read, for each of the states listed
 above, and the character displayed in each indicates:
 
-   '.'  acquired while irqs disabled
-   '+'  acquired in irq context
-   '-'  acquired with irqs enabled
+   '.'  acquired while irqs disabled and not in irq context
+   '-'  acquired in irq context
+   '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
 
 Unused mutexes cannot be part of the cause of an error.
-- 
GitLab


From 314eeac9e35d8b934dd7a09ed3a8e00d41977b84 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 24 Apr 2009 14:35:57 +0200
Subject: [PATCH 0854/1421] dma-debug: remove broken dma memory leak detection
 for 2.6.30

The feature needs some more work because the notfier which is used to
check for pending allocations is called before the device drivers
->remove() function. Therefore this feature reports false positives.

A real fix for this issue is to introduce a new notifier event which sent
_after_ the driver has deinitialized itself. That will done for the next
kernel version.

[ Impact: reduce the scope of CONFIG_DMA_API_DEBUG=y checks ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
LKML-Reference: <1240576557-22442-1-git-send-email-joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 lib/dma-debug.c | 53 +------------------------------------------------
 1 file changed, 1 insertion(+), 52 deletions(-)

diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index d3da7edc034..69da09a085a 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -400,60 +400,9 @@ out_err:
 	return -ENOMEM;
 }
 
-static int device_dma_allocations(struct device *dev)
-{
-	struct dma_debug_entry *entry;
-	unsigned long flags;
-	int count = 0, i;
-
-	for (i = 0; i < HASH_SIZE; ++i) {
-		spin_lock_irqsave(&dma_entry_hash[i].lock, flags);
-		list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
-			if (entry->dev == dev)
-				count += 1;
-		}
-		spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags);
-	}
-
-	return count;
-}
-
-static int dma_debug_device_change(struct notifier_block *nb,
-				    unsigned long action, void *data)
-{
-	struct device *dev = data;
-	int count;
-
-
-	switch (action) {
-	case BUS_NOTIFY_UNBIND_DRIVER:
-		count = device_dma_allocations(dev);
-		if (count == 0)
-			break;
-		err_printk(dev, NULL, "DMA-API: device driver has pending "
-				"DMA allocations while released from device "
-				"[count=%d]\n", count);
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
 void dma_debug_add_bus(struct bus_type *bus)
 {
-	struct notifier_block *nb;
-
-	nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
-	if (nb == NULL) {
-		printk(KERN_ERR "dma_debug_add_bus: out of memory\n");
-		return;
-	}
-
-	nb->notifier_call = dma_debug_device_change;
-
-	bus_register_notifier(bus, nb);
+	/* FIXME: register notifier */
 }
 
 /*
-- 
GitLab


From 40f4a6d522e68a0203ebefb57f3cbdac4a622169 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Wed, 22 Apr 2009 10:50:19 +0000
Subject: [PATCH 0855/1421] sh: sh7785lcr: fix defconfig for 29-bit mode

Fix the problem that cannot work 29-bit mode when use sh7785lcr_defconfig.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/sh7785lcr_defconfig | 57 +++++++++++++++++++----------
 1 file changed, 37 insertions(+), 20 deletions(-)

diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 8a42bbef1f5..e4fac2efc05 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:15:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 19:17:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -79,6 +80,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -106,6 +109,8 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,7 +123,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +170,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -175,8 +180,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -186,38 +189,31 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
-# CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
+CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
 # CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -249,6 +245,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # CONFIG_SH_HIGHLANDER is not set
 CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
 
 #
 # Timer and clock configuration
@@ -672,6 +669,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1009,15 +1007,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1218,6 +1218,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1239,6 +1240,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1289,6 +1295,7 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1377,6 +1384,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1413,6 +1423,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1422,9 +1433,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1542,6 +1558,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
-- 
GitLab


From 6b3480855aad6e22ca90981a4c7893a7f41ffb47 Mon Sep 17 00:00:00 2001
From: Adrian McMenamin <adrian@newgolddream.dyndns.info>
Date: Sat, 25 Apr 2009 20:43:18 +0000
Subject: [PATCH 0856/1421] maple: input: fix up maple mouse driver

The maple mouse driver currently in mainline is broken:

bash-3.1# modprobe maplemouse
[   56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3
[   56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[   56.930543] pc = c003304e
[   56.934973] *pde = 00000000
[   56.944948] Oops: 0000 [#1]
[   56.947867] Modules linked in: maplemouse(+)
[   56.952353]
[   56.953921] Pid : 1157, Comm: \0x09\0x09modprobe
[   56.958021] CPU : 0        \0x09\0x09Not tainted  (2.6.30-rc2-00130-g3e98f9f #1)
[   56.958052]
[   56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse]
[   56.972125] PR is at input_open_device+0x8a/0xc0
[   56.976944] PC  : c003304e SP  : 8c88bdcc SR  : 40008100 TEA : c0033834
[   56.983854] R0  : 000006c4 R1  : 00000000 R2  : 40008101 R3  : 00000000
[   56.990744] R4  : 8c8db800 R5  : c0033080 R6  : 00000005 R7  : 00000200
[   56.997635] R8  : 8c8db800 R9  : 8c8dbe3c R10 : 00000000 R11 : 8c98881c
[   57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4
[   57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR  : 8c1b4d0a
[   57.016939]
...

Here is a fix for this, keeping an open and close, so reducing
the load on the system when the mouse is not in use, and also properly
referencing the maple device buffer following the recent update.

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/input/mouse/maplemouse.c | 43 +++++++++++++++++---------------
 1 file changed, 23 insertions(+), 20 deletions(-)

diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c
index d196abfb68b..5f278176eb9 100644
--- a/drivers/input/mouse/maplemouse.c
+++ b/drivers/input/mouse/maplemouse.c
@@ -2,8 +2,8 @@
  *	SEGA Dreamcast mouse driver
  *	Based on drivers/usb/usbmouse.c
  *
- *	Copyright Yaegashi Takeshi, 2001
- *	Adrian McMenamin, 2008
+ *	Copyright (c) Yaegashi Takeshi, 2001
+ *	Copyright (c) Adrian McMenamin, 2008 - 2009
  */
 
 #include <linux/kernel.h>
@@ -29,7 +29,7 @@ static void dc_mouse_callback(struct mapleq *mq)
 	struct maple_device *mapledev = mq->dev;
 	struct dc_mouse *mse = maple_get_drvdata(mapledev);
 	struct input_dev *dev = mse->dev;
-	unsigned char *res = mq->recvbuf;
+	unsigned char *res = mq->recvbuf->buf;
 
 	buttons = ~res[8];
 	relx = *(unsigned short *)(res + 12) - 512;
@@ -47,7 +47,7 @@ static void dc_mouse_callback(struct mapleq *mq)
 
 static int dc_mouse_open(struct input_dev *dev)
 {
-	struct dc_mouse *mse = dev->dev.platform_data;
+	struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
 
 	maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50,
 		MAPLE_FUNC_MOUSE);
@@ -57,29 +57,33 @@ static int dc_mouse_open(struct input_dev *dev)
 
 static void dc_mouse_close(struct input_dev *dev)
 {
-	struct dc_mouse *mse = dev->dev.platform_data;
+	struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
 
 	maple_getcond_callback(mse->mdev, dc_mouse_callback, 0,
 		MAPLE_FUNC_MOUSE);
 }
 
-
+/* allow the mouse to be used */
 static int __devinit probe_maple_mouse(struct device *dev)
 {
 	struct maple_device *mdev = to_maple_dev(dev);
 	struct maple_driver *mdrv = to_maple_driver(dev->driver);
+	int error;
 	struct input_dev *input_dev;
 	struct dc_mouse *mse;
-	int error;
 
 	mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL);
-	input_dev = input_allocate_device();
-
-	if (!mse || !input_dev) {
+	if (!mse) {
 		error = -ENOMEM;
 		goto fail;
 	}
 
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		error = -ENOMEM;
+		goto fail_nomem;
+	}
+
 	mse->dev = input_dev;
 	mse->mdev = mdev;
 
@@ -89,25 +93,24 @@ static int __devinit probe_maple_mouse(struct device *dev)
 		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
 	input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
 		BIT_MASK(REL_WHEEL);
-	input_dev->name = mdev->product_name;
-	input_dev->id.bustype = BUS_HOST;
 	input_dev->open = dc_mouse_open;
 	input_dev->close = dc_mouse_close;
+	input_dev->name = mdev->product_name;
+	input_dev->id.bustype = BUS_HOST;
+	error =	input_register_device(input_dev);
+	if (error)
+		goto fail_register;
 
 	mdev->driver = mdrv;
 	maple_set_drvdata(mdev, mse);
 
-	error =	input_register_device(input_dev);
-	if (error)
-		goto fail;
-
-	return 0;
+	return error;
 
-fail:
+fail_register:
 	input_free_device(input_dev);
-	maple_set_drvdata(mdev, NULL);
+fail_nomem:
 	kfree(mse);
-	mdev->driver = NULL;
+fail:
 	return error;
 }
 
-- 
GitLab


From a8f6faebaf5b3f0f56b7c12a4f99d97c56938b37 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 21 Apr 2009 14:39:07 +0800
Subject: [PATCH 0857/1421] [ARM] pxa: fix issue of muxed GPIO irq_chip
 functions touching non-muxed GPIOs

pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs
(0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect.
Actually, only those bits should get updated if the corresponding bits are
set in c->irq_mask as well. Fix this by updating only those relevant bits.

Reported-and-tested-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/plat-pxa/gpio.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index af819bf21b6..abc79d44aca 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 		return -ENOMEM;
 	}
 
+	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
+
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 
@@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	return 0;
 }
 
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+	uint32_t grer, gfer;
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+	grer |= c->irq_edge_rise & c->irq_mask;
+	gfer |= c->irq_edge_fall & c->irq_mask;
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	struct pxa_gpio_chip *c;
@@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	else
 		c->irq_edge_fall &= ~mask;
 
-	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
-	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+	update_edge_detect(c);
 
 	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
 		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
@@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq)
 	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
 
 	c->irq_mask |= GPIO_bit(gpio);
-	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
-	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+	update_edge_detect(c);
 }
 
 static struct irq_chip pxa_muxed_gpio_chip = {
-- 
GitLab


From fd87e081723089cba99df0b3d6f36ae2235c700a Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 16 Apr 2009 11:23:08 +0200
Subject: [PATCH 0858/1421] [ARM] pxa: remove duplicate select statements from
 Kconfig

ARCH_PXA selects HAVE_CLK and COMMON_CLKDEV twice in arch/arm/Kconfig.
Remove the second entry.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e02b893fb90..9909a93ec7f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -486,8 +486,6 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
-- 
GitLab


From 36b5437f33fb95196bef2345dede39fdcab3e431 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Fri, 17 Apr 2009 11:37:10 +0200
Subject: [PATCH 0859/1421] [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig
 symbol

cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as
CPU_FREQ is enabled.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig                 | 6 ------
 arch/arm/configs/viper_defconfig | 1 -
 2 files changed, 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9909a93ec7f..fb667cd43f7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1169,12 +1169,6 @@ config CPU_FREQ_IMX
 
 	  If in doubt, say N.
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 30f463d2fa8..6ab5dd5868d 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
 
 #
 # Floating point emulation
-- 
GitLab


From 3e36c0deea118e277f4ff9fa947bcde5f88426ca Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 6 Feb 2009 16:49:23 +0800
Subject: [PATCH 0860/1421] [ARM] pxa: make ads7846 on corgi and spitz to sync
 on HSYNC

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/corgi.c | 10 ++++++++++
 arch/arm/mach-pxa/spitz.c | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index cdf21dd135b..930e364ccde 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static void corgi_wait_for_hsync(void)
+{
+	while (gpio_get_value(CORGI_GPIO_HSYNC))
+		cpu_relax();
+
+	while (!gpio_get_value(CORGI_GPIO_HSYNC))
+		cpu_relax();
+}
+
 static struct ads7846_platform_data corgi_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
 	.gpio_pendown		= CORGI_GPIO_TP_INT,
+	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
 static void corgi_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 8c61ddac119..c18e34acafc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static void spitz_wait_for_hsync(void)
+{
+	while (gpio_get_value(SPITZ_GPIO_HSYNC))
+		cpu_relax();
+
+	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+		cpu_relax();
+}
+
 static struct ads7846_platform_data spitz_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
+	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
 static void spitz_ads7846_cs(u32 command)
-- 
GitLab


From 15fbc938576175eeb53798221f045d4ace52e5dc Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 22 Apr 2009 18:34:36 +0800
Subject: [PATCH 0861/1421] [ARM] pxa/zylonite: fix the issue of unused
 SDATA_IN_1 pin get AC97 not working

GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd
codec but unused on the board, yet they are initialized incorrectly by the
bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to
work. Fix this issue by configuring these pins as normal GPIO to avoid the
noise from these pins being treated as signals from the 2nd codec.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/zylonite_pxa300.c | 1 +
 arch/arm/mach-pxa/zylonite_pxa320.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c1f73205d07..e99555b76a0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO25_AC97_SDATA_IN_0,
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
+	GPIO17_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
 
 	/* SSP3 */
 	GPIO91_SSP3_SCLK,
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 4e1c488c690..cc5a2283360 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO38_AC97_SYNC,
 	GPIO39_AC97_BITCLK,
 	GPIO40_AC97_nACRESET,
+	GPIO36_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
 
 	/* SSP3 */
 	GPIO89_SSP3_SCLK,
-- 
GitLab


From b49e385fc7cb4e6ed4206dfdab2b2579c5076120 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 22 Apr 2009 18:38:40 +0800
Subject: [PATCH 0862/1421] [ARM] pxa/zylonite: configure GPIO18/19 correctly,
 used by 2 GPIO expanders

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/zylonite_pxa300.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index e99555b76a0..c256c57642c 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -127,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* GPIO */
+	GPIO18_GPIO,	/* GPIO Expander #0 INT_N */
+	GPIO19_GPIO,	/* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
-- 
GitLab


From fc76132b1e72efe45b5a5a693caadd54c3037f55 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 13 Apr 2009 11:06:49 +0800
Subject: [PATCH 0863/1421] [ARM] pxa/littleton: add missing da9034 touchscreen
 support

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/littleton.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e13f6a81c22..c872b9feb4d 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = {
 	},
 };
 
+static struct da9034_touch_pdata littleton_da9034_touch = {
+	.x_inverted     = 1,
+	.interval_ms    = 20,
+};
+
 static struct da903x_subdev_info littleton_da9034_subdevs[] = {
 	{
 		.name		= "da903x-led",
@@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = {
 	}, {
 		.name		= "da903x-backlight",
 		.id		= DA9034_ID_WLED,
+	}, {
+		.name		= "da9034-touch",
+		.id		= DA9034_ID_TOUCH,
+		.platform_data	= &littleton_da9034_touch,
 	},
 };
 
-- 
GitLab


From ecd4ca52bfdb4108f47aa480781b97f037051a72 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 27 Apr 2009 17:05:38 +0900
Subject: [PATCH 0864/1421] sh: Fix up unsigned syscall_nr in SH-5 pt_regs.

syscall_nr is presently defined as unsigned in the SH-5 pt_regs,
while the syscall restarting code wants it to be signed. Fix this
up, and bring it in line with the other SH parts.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/ptrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index d3f6caa936b..68e20ff9aa9 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -9,7 +9,7 @@
 struct pt_regs {
 	unsigned long long pc;
 	unsigned long long sr;
-	unsigned long long syscall_nr;
+	long long syscall_nr;
 	unsigned long long regs[63];
 	unsigned long long tregs[8];
 	unsigned long long pad[2];
-- 
GitLab


From cad81bc2529ab8c62b6fdc83a1c0c7f4a87209eb Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Mon, 27 Apr 2009 01:41:34 +0200
Subject: [PATCH 0865/1421] ptrace: ptrace_attach: fix the usage of
 ->cred_exec_mutex

ptrace_attach() needs task->cred_exec_mutex, not current->cred_exec_mutex.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 kernel/ptrace.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index dfcd83ceee3..0692ab5a0d6 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -188,7 +188,7 @@ int ptrace_attach(struct task_struct *task)
 	/* Protect exec's credential calculations against our interference;
 	 * SUID, SGID and LSM creds get determined differently under ptrace.
 	 */
-	retval = mutex_lock_interruptible(&current->cred_exec_mutex);
+	retval = mutex_lock_interruptible(&task->cred_exec_mutex);
 	if (retval  < 0)
 		goto out;
 
@@ -232,7 +232,7 @@ repeat:
 bad:
 	write_unlock_irqrestore(&tasklist_lock, flags);
 	task_unlock(task);
-	mutex_unlock(&current->cred_exec_mutex);
+	mutex_unlock(&task->cred_exec_mutex);
 out:
 	return retval;
 }
-- 
GitLab


From a9b487fa1e00b42f9667abfeca4a5295a71333db Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 27 Apr 2009 12:18:05 +0200
Subject: [PATCH 0866/1421] ALSA: snd-usb-caiaq: fix reported elapsed periods

Reset the internal period position counter upon stream startup. This
fixes initial aplay underruns and problems related to latency picky
applications such as pulseaudio.

Bumped the version number to 1.3.14.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/caiaq/audio.c  | 12 +++++++-----
 sound/usb/caiaq/device.c |  2 +-
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 3f45c0fe61a..b13ce767ac7 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -195,11 +195,14 @@ static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
 
 	debug("%s(%p)\n", __func__, substream);
 	
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
 		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
-	else
+	} else {
+		dev->period_in_count[index] = BYTES_PER_SAMPLE;
 		dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
-	
+	}
+
 	if (dev->streaming)
 		return 0;
 	
@@ -300,8 +303,7 @@ static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
 		if (!sub)
 			continue;
 
-		pb = frames_to_bytes(sub->runtime, 
-				     sub->runtime->period_size);
+		pb = snd_pcm_lib_period_bytes(sub);
 		cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
 					&dev->period_out_count[stream] :
 					&dev->period_in_count[stream];
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 6d517705da0..515de1cd2a3 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,7 +35,7 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
-- 
GitLab


From d6397baee468809ef311e763dfc6e9f73418f8a6 Mon Sep 17 00:00:00 2001
From: Chris Ball <cjb@laptop.org>
Date: Mon, 27 Apr 2009 07:29:03 -0400
Subject: [PATCH 0867/1421] Btrfs: When shrinking, only update disk size on
 success

Previously, we updated a device's size prior to attempting a shrink
operation.  This patch moves the device resizing logic to only happen if
the shrink completes successfully.  In the process, it introduces a new
field to btrfs_device -- disk_total_bytes -- to track the on-disk size.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/volumes.c | 35 ++++++++++++++++++++++++-----------
 fs/btrfs/volumes.h |  3 +++
 2 files changed, 27 insertions(+), 11 deletions(-)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index e53835b8859..5f01dad4b69 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1543,7 +1543,7 @@ static noinline int btrfs_update_device(struct btrfs_trans_handle *trans,
 	btrfs_set_device_io_align(leaf, dev_item, device->io_align);
 	btrfs_set_device_io_width(leaf, dev_item, device->io_width);
 	btrfs_set_device_sector_size(leaf, dev_item, device->sector_size);
-	btrfs_set_device_total_bytes(leaf, dev_item, device->total_bytes);
+	btrfs_set_device_total_bytes(leaf, dev_item, device->disk_total_bytes);
 	btrfs_set_device_bytes_used(leaf, dev_item, device->bytes_used);
 	btrfs_mark_buffer_dirty(leaf);
 
@@ -1940,14 +1940,6 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 	device->total_bytes = new_size;
 	if (device->writeable)
 		device->fs_devices->total_rw_bytes -= diff;
-	ret = btrfs_update_device(trans, device);
-	if (ret) {
-		unlock_chunks(root);
-		btrfs_end_transaction(trans, root);
-		goto done;
-	}
-	WARN_ON(diff > old_total);
-	btrfs_set_super_total_bytes(super_copy, old_total - diff);
 	unlock_chunks(root);
 	btrfs_end_transaction(trans, root);
 
@@ -1979,7 +1971,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 		length = btrfs_dev_extent_length(l, dev_extent);
 
 		if (key.offset + length <= new_size)
-			goto done;
+			break;
 
 		chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
 		chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
@@ -1992,6 +1984,26 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 			goto done;
 	}
 
+	/* Shrinking succeeded, else we would be at "done". */
+	trans = btrfs_start_transaction(root, 1);
+	if (!trans) {
+		ret = -ENOMEM;
+		goto done;
+	}
+	lock_chunks(root);
+
+	device->disk_total_bytes = new_size;
+	/* Now btrfs_update_device() will change the on-disk size. */
+	ret = btrfs_update_device(trans, device);
+	if (ret) {
+		unlock_chunks(root);
+		btrfs_end_transaction(trans, root);
+		goto done;
+	}
+	WARN_ON(diff > old_total);
+	btrfs_set_super_total_bytes(super_copy, old_total - diff);
+	unlock_chunks(root);
+	btrfs_end_transaction(trans, root);
 done:
 	btrfs_free_path(path);
 	return ret;
@@ -3076,7 +3088,8 @@ static int fill_device_from_item(struct extent_buffer *leaf,
 	unsigned long ptr;
 
 	device->devid = btrfs_device_id(leaf, dev_item);
-	device->total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+	device->disk_total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+	device->total_bytes = device->disk_total_bytes;
 	device->bytes_used = btrfs_device_bytes_used(leaf, dev_item);
 	device->type = btrfs_device_type(leaf, dev_item);
 	device->io_align = btrfs_device_io_align(leaf, dev_item);
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 5836327ba5d..5c3ff6d02fd 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -61,6 +61,9 @@ struct btrfs_device {
 	/* size of the device */
 	u64 total_bytes;
 
+	/* size of the disk */
+	u64 disk_total_bytes;
+
 	/* bytes used */
 	u64 bytes_used;
 
-- 
GitLab


From b7967db75a38df4891b22efe1b0969b9357eb946 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 27 Apr 2009 07:29:04 -0400
Subject: [PATCH 0868/1421] Btrfs: remove #if 0 code

Btrfs had some old code sitting around under #if 0, this drops it.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c   | 48 +--------------------------
 fs/btrfs/extent_io.c | 63 -----------------------------------
 fs/btrfs/file.c      | 78 --------------------------------------------
 3 files changed, 1 insertion(+), 188 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 44c94d808e2..77f9a3b824b 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -584,18 +584,7 @@ int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode,
 		btrfs_set_work_high_prio(&async->work);
 
 	btrfs_queue_worker(&fs_info->workers, &async->work);
-#if 0
-	int limit = btrfs_async_submit_limit(fs_info);
-	if (atomic_read(&fs_info->nr_async_submits) > limit) {
-		wait_event_timeout(fs_info->async_submit_wait,
-			   (atomic_read(&fs_info->nr_async_submits) < limit),
-			   HZ/10);
 
-		wait_event_timeout(fs_info->async_submit_wait,
-			   (atomic_read(&fs_info->nr_async_bios) < limit),
-			   HZ/10);
-	}
-#endif
 	while (atomic_read(&fs_info->async_submit_draining) &&
 	      atomic_read(&fs_info->nr_async_submits)) {
 		wait_event(fs_info->async_submit_wait,
@@ -770,27 +759,6 @@ static void btree_invalidatepage(struct page *page, unsigned long offset)
 	}
 }
 
-#if 0
-static int btree_writepage(struct page *page, struct writeback_control *wbc)
-{
-	struct buffer_head *bh;
-	struct btrfs_root *root = BTRFS_I(page->mapping->host)->root;
-	struct buffer_head *head;
-	if (!page_has_buffers(page)) {
-		create_empty_buffers(page, root->fs_info->sb->s_blocksize,
-					(1 << BH_Dirty)|(1 << BH_Uptodate));
-	}
-	head = page_buffers(page);
-	bh = head;
-	do {
-		if (buffer_dirty(bh))
-			csum_tree_block(root, bh, 0);
-		bh = bh->b_this_page;
-	} while (bh != head);
-	return block_write_full_page(page, btree_get_block, wbc);
-}
-#endif
-
 static struct address_space_operations btree_aops = {
 	.readpage	= btree_readpage,
 	.writepage	= btree_writepage,
@@ -1278,11 +1246,7 @@ static int btrfs_congested_fn(void *congested_data, int bdi_bits)
 	int ret = 0;
 	struct btrfs_device *device;
 	struct backing_dev_info *bdi;
-#if 0
-	if ((bdi_bits & (1 << BDI_write_congested)) &&
-	    btrfs_congested_async(info, 0))
-		return 1;
-#endif
+
 	list_for_each_entry(device, &info->fs_devices->devices, dev_list) {
 		if (!device->bdev)
 			continue;
@@ -2334,16 +2298,6 @@ int close_ctree(struct btrfs_root *root)
 	btrfs_stop_workers(&fs_info->endio_write_workers);
 	btrfs_stop_workers(&fs_info->submit_workers);
 
-#if 0
-	while (!list_empty(&fs_info->hashers)) {
-		struct btrfs_hasher *hasher;
-		hasher = list_entry(fs_info->hashers.next, struct btrfs_hasher,
-				    hashers);
-		list_del(&hasher->hashers);
-		crypto_free_hash(&fs_info->hash_tfm);
-		kfree(hasher);
-	}
-#endif
 	btrfs_close_devices(fs_info->fs_devices);
 	btrfs_mapping_tree_free(&fs_info->mapping_tree);
 
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index c33b54029d7..fe9eb990e44 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -1401,69 +1401,6 @@ out:
 	return total_bytes;
 }
 
-#if 0
-/*
- * helper function to lock both pages and extents in the tree.
- * pages must be locked first.
- */
-static int lock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
-	unsigned long index = start >> PAGE_CACHE_SHIFT;
-	unsigned long end_index = end >> PAGE_CACHE_SHIFT;
-	struct page *page;
-	int err;
-
-	while (index <= end_index) {
-		page = grab_cache_page(tree->mapping, index);
-		if (!page) {
-			err = -ENOMEM;
-			goto failed;
-		}
-		if (IS_ERR(page)) {
-			err = PTR_ERR(page);
-			goto failed;
-		}
-		index++;
-	}
-	lock_extent(tree, start, end, GFP_NOFS);
-	return 0;
-
-failed:
-	/*
-	 * we failed above in getting the page at 'index', so we undo here
-	 * up to but not including the page at 'index'
-	 */
-	end_index = index;
-	index = start >> PAGE_CACHE_SHIFT;
-	while (index < end_index) {
-		page = find_get_page(tree->mapping, index);
-		unlock_page(page);
-		page_cache_release(page);
-		index++;
-	}
-	return err;
-}
-
-/*
- * helper function to unlock both pages and extents in the tree.
- */
-static int unlock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
-	unsigned long index = start >> PAGE_CACHE_SHIFT;
-	unsigned long end_index = end >> PAGE_CACHE_SHIFT;
-	struct page *page;
-
-	while (index <= end_index) {
-		page = find_get_page(tree->mapping, index);
-		unlock_page(page);
-		page_cache_release(page);
-		index++;
-	}
-	unlock_extent(tree, start, end, GFP_NOFS);
-	return 0;
-}
-#endif
-
 /*
  * set the private field for a given byte offset in the tree.  If there isn't
  * an extent_state there already, this does nothing.
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index da3ed965c95..1d51dc38bb4 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -272,83 +272,6 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end,
 	return 0;
 }
 
-int btrfs_check_file(struct btrfs_root *root, struct inode *inode)
-{
-	return 0;
-#if 0
-	struct btrfs_path *path;
-	struct btrfs_key found_key;
-	struct extent_buffer *leaf;
-	struct btrfs_file_extent_item *extent;
-	u64 last_offset = 0;
-	int nritems;
-	int slot;
-	int found_type;
-	int ret;
-	int err = 0;
-	u64 extent_end = 0;
-
-	path = btrfs_alloc_path();
-	ret = btrfs_lookup_file_extent(NULL, root, path, inode->i_ino,
-				       last_offset, 0);
-	while (1) {
-		nritems = btrfs_header_nritems(path->nodes[0]);
-		if (path->slots[0] >= nritems) {
-			ret = btrfs_next_leaf(root, path);
-			if (ret)
-				goto out;
-			nritems = btrfs_header_nritems(path->nodes[0]);
-		}
-		slot = path->slots[0];
-		leaf = path->nodes[0];
-		btrfs_item_key_to_cpu(leaf, &found_key, slot);
-		if (found_key.objectid != inode->i_ino)
-			break;
-		if (found_key.type != BTRFS_EXTENT_DATA_KEY)
-			goto out;
-
-		if (found_key.offset < last_offset) {
-			WARN_ON(1);
-			btrfs_print_leaf(root, leaf);
-			printk(KERN_ERR "inode %lu found offset %llu "
-			       "expected %llu\n", inode->i_ino,
-			       (unsigned long long)found_key.offset,
-			       (unsigned long long)last_offset);
-			err = 1;
-			goto out;
-		}
-		extent = btrfs_item_ptr(leaf, slot,
-					struct btrfs_file_extent_item);
-		found_type = btrfs_file_extent_type(leaf, extent);
-		if (found_type == BTRFS_FILE_EXTENT_REG) {
-			extent_end = found_key.offset +
-			     btrfs_file_extent_num_bytes(leaf, extent);
-		} else if (found_type == BTRFS_FILE_EXTENT_INLINE) {
-			struct btrfs_item *item;
-			item = btrfs_item_nr(leaf, slot);
-			extent_end = found_key.offset +
-			     btrfs_file_extent_inline_len(leaf, extent);
-			extent_end = (extent_end + root->sectorsize - 1) &
-				~((u64)root->sectorsize - 1);
-		}
-		last_offset = extent_end;
-		path->slots[0]++;
-	}
-	if (0 && last_offset < inode->i_size) {
-		WARN_ON(1);
-		btrfs_print_leaf(root, leaf);
-		printk(KERN_ERR "inode %lu found offset %llu size %llu\n",
-		       inode->i_ino, (unsigned long long)last_offset,
-		       (unsigned long long)inode->i_size);
-		err = 1;
-
-	}
-out:
-	btrfs_free_path(path);
-	return err;
-#endif
-}
-
 /*
  * this is very complex, but the basic idea is to drop all extents
  * in the range start - end.  hint_block is filled in with a block number
@@ -689,7 +612,6 @@ out:
 		unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end,
 			      locked_end - 1, GFP_NOFS);
 	}
-	btrfs_check_file(root, inode);
 	return ret;
 }
 
-- 
GitLab


From 193f284d4985db0370a8a1bbdfb20df548cf9ffb Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 27 Apr 2009 07:29:05 -0400
Subject: [PATCH 0869/1421] Btrfs: ratelimit IO error printks

Btrfs has printks for various IO errors, including bad checksums and
mismatches between what we expect the block headers to contain and what
we actually find on the disk.

Longer term we need a real reporting mechanism for this, but for now
printk is going to have to do.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c | 38 +++++++++++++++++++++++++-------------
 fs/btrfs/inode.c   | 10 ++++++----
 2 files changed, 31 insertions(+), 17 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 77f9a3b824b..aa0c259b9c2 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -232,10 +232,14 @@ static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf,
 			memcpy(&found, result, csum_size);
 
 			read_extent_buffer(buf, &val, 0, csum_size);
-			printk(KERN_INFO "btrfs: %s checksum verify failed "
-			       "on %llu wanted %X found %X level %d\n",
-			       root->fs_info->sb->s_id,
-			       buf->start, val, found, btrfs_header_level(buf));
+			if (printk_ratelimit()) {
+				printk(KERN_INFO "btrfs: %s checksum verify "
+				       "failed on %llu wanted %X found %X "
+				       "level %d\n",
+				       root->fs_info->sb->s_id,
+				       (unsigned long long)buf->start, val, found,
+				       btrfs_header_level(buf));
+			}
 			if (result != (char *)&inline_result)
 				kfree(result);
 			return 1;
@@ -268,10 +272,13 @@ static int verify_parent_transid(struct extent_io_tree *io_tree,
 		ret = 0;
 		goto out;
 	}
-	printk("parent transid verify failed on %llu wanted %llu found %llu\n",
-	       (unsigned long long)eb->start,
-	       (unsigned long long)parent_transid,
-	       (unsigned long long)btrfs_header_generation(eb));
+	if (printk_ratelimit()) {
+		printk("parent transid verify failed on %llu wanted %llu "
+		       "found %llu\n",
+		       (unsigned long long)eb->start,
+		       (unsigned long long)parent_transid,
+		       (unsigned long long)btrfs_header_generation(eb));
+	}
 	ret = 1;
 	clear_extent_buffer_uptodate(io_tree, eb);
 out:
@@ -415,9 +422,12 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end,
 
 	found_start = btrfs_header_bytenr(eb);
 	if (found_start != start) {
-		printk(KERN_INFO "btrfs bad tree block start %llu %llu\n",
-		       (unsigned long long)found_start,
-		       (unsigned long long)eb->start);
+		if (printk_ratelimit()) {
+			printk(KERN_INFO "btrfs bad tree block start "
+			       "%llu %llu\n",
+			       (unsigned long long)found_start,
+			       (unsigned long long)eb->start);
+		}
 		ret = -EIO;
 		goto err;
 	}
@@ -429,8 +439,10 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end,
 		goto err;
 	}
 	if (check_tree_block_fsid(root, eb)) {
-		printk(KERN_INFO "btrfs bad fsid on block %llu\n",
-		       (unsigned long long)eb->start);
+		if (printk_ratelimit()) {
+			printk(KERN_INFO "btrfs bad fsid on block %llu\n",
+			       (unsigned long long)eb->start);
+		}
 		ret = -EIO;
 		goto err;
 	}
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 2fdb2995be6..552e08afc7f 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1823,10 +1823,12 @@ good:
 	return 0;
 
 zeroit:
-	printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
-	       "private %llu\n", page->mapping->host->i_ino,
-	       (unsigned long long)start, csum,
-	       (unsigned long long)private);
+	if (printk_ratelimit()) {
+		printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
+		       "private %llu\n", page->mapping->host->i_ino,
+		       (unsigned long long)start, csum,
+		       (unsigned long long)private);
+	}
 	memset(kaddr + offset, 1, end - start + 1);
 	flush_dcache_page(page);
 	kunmap_atomic(kaddr, KM_USER0);
-- 
GitLab


From 395a434e39cb6dc6e1ff53bb43722b534a3c68d6 Mon Sep 17 00:00:00 2001
From: Subrata Modak <subrata@linux.vnet.ibm.com>
Date: Mon, 27 Apr 2009 16:42:37 +0530
Subject: [PATCH 0870/1421] ALSA: Fix Trivial Warnining in sound/pci/cmipci.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixed the compile warning below by initializatin iomidi variable properly.
  sound/pci/cmipci.c: In function ‘snd_cmipci_probe’:
  sound/pci/cmipci.c:3017: warning: ‘iomidi’ may be used uninitialized in this function

Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: linux-pci <linux-pci@atrey.karlin.mff.cuni.cz>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/cmipci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index c7899c32aba..449fe02f666 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -3014,7 +3014,7 @@ static int __devinit snd_cmipci_create(struct snd_card *card, struct pci_dev *pc
 		.dev_free =	snd_cmipci_dev_free,
 	};
 	unsigned int val;
-	long iomidi;
+	long iomidi = 0;
 	int integrated_midi = 0;
 	char modelstr[16];
 	int pcm_index, pcm_spdif_index;
-- 
GitLab


From 45c06543afe2772c02f21efee0e2138b4e1c911e Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 27 Apr 2009 07:49:10 -0400
Subject: [PATCH 0871/1421] Btrfs: remove unused btrfs_bit_radix slab

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 552e08afc7f..98bd5069d54 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -70,7 +70,6 @@ static struct extent_io_ops btrfs_extent_io_ops;
 static struct kmem_cache *btrfs_inode_cachep;
 struct kmem_cache *btrfs_trans_handle_cachep;
 struct kmem_cache *btrfs_transaction_cachep;
-struct kmem_cache *btrfs_bit_radix_cachep;
 struct kmem_cache *btrfs_path_cachep;
 
 #define S_SHIFT 12
@@ -4641,8 +4640,6 @@ void btrfs_destroy_cachep(void)
 		kmem_cache_destroy(btrfs_trans_handle_cachep);
 	if (btrfs_transaction_cachep)
 		kmem_cache_destroy(btrfs_transaction_cachep);
-	if (btrfs_bit_radix_cachep)
-		kmem_cache_destroy(btrfs_bit_radix_cachep);
 	if (btrfs_path_cachep)
 		kmem_cache_destroy(btrfs_path_cachep);
 }
@@ -4673,11 +4670,6 @@ int btrfs_init_cachep(void)
 	if (!btrfs_path_cachep)
 		goto fail;
 
-	btrfs_bit_radix_cachep = kmem_cache_create("btrfs_radix", 256, 0,
-			SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD |
-			SLAB_DESTROY_BY_RCU, NULL);
-	if (!btrfs_bit_radix_cachep)
-		goto fail;
 	return 0;
 fail:
 	btrfs_destroy_cachep();
-- 
GitLab


From e63b6a6c0ffa2ebd8617cc1a10969000296831aa Mon Sep 17 00:00:00 2001
From: Joel Becker <joel.becker@oracle.com>
Date: Tue, 21 Apr 2009 12:38:30 -0700
Subject: [PATCH 0872/1421] Btrfs: Fix a trivial warning using max() of u64 vs
 ULL.

A small warning popped up on ia64 because inode-map.c was comparing a
u64 object id with the ULL FIRST_FREE_OBJECTID.  My first thought was
that all the OBJECTID constants should contain the u64 cast because
btrfs code deals entirely in u64s.  But then I saw how large that was,
and figured I'd just fix the max() call.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode-map.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index cc7334d833c..9abbced1123 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -79,7 +79,7 @@ int btrfs_find_free_objectid(struct btrfs_trans_handle *trans,
 	}
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
-	search_start = max(search_start, BTRFS_FIRST_FREE_OBJECTID);
+	search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID);
 	search_key.objectid = search_start;
 	search_key.type = 0;
 	search_key.offset = 0;
-- 
GitLab


From 21380931eb4da4e29ac663d0221581282cbba208 Mon Sep 17 00:00:00 2001
From: Joel Becker <joel.becker@oracle.com>
Date: Tue, 21 Apr 2009 12:38:29 -0700
Subject: [PATCH 0873/1421] Btrfs: Fix a bunch of printk() warnings.

Just happened to notice a bunch of %llu vs u64 warnings.  Here's a patch
to cast them all.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c          |  6 +++---
 fs/btrfs/extent-tree.c      | 21 ++++++++++++++-------
 fs/btrfs/free-space-cache.c | 15 ++++++++++-----
 fs/btrfs/ioctl.c            |  6 ++++--
 fs/btrfs/super.c            | 15 +++++++++------
 5 files changed, 40 insertions(+), 23 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index aa0c259b9c2..0ff16d3331d 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1671,7 +1671,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	if (features) {
 		printk(KERN_ERR "BTRFS: couldn't mount because of "
 		       "unsupported optional features (%Lx).\n",
-		       features);
+		       (unsigned long long)features);
 		err = -EINVAL;
 		goto fail_iput;
 	}
@@ -1681,7 +1681,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	if (!(sb->s_flags & MS_RDONLY) && features) {
 		printk(KERN_ERR "BTRFS: couldn't mount RDWR because of "
 		       "unsupported option features (%Lx).\n",
-		       features);
+		       (unsigned long long)features);
 		err = -EINVAL;
 		goto fail_iput;
 	}
@@ -2273,7 +2273,7 @@ int close_ctree(struct btrfs_root *root)
 
 	if (fs_info->delalloc_bytes) {
 		printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
-		       fs_info->delalloc_bytes);
+		       (unsigned long long)fs_info->delalloc_bytes);
 	}
 	if (fs_info->total_ref_cache_size) {
 		printk(KERN_INFO "btrfs: at umount reference cache size %llu\n",
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 2895a837323..e4966444811 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -1844,10 +1844,14 @@ again:
 		printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
 		       ", %llu bytes_used, %llu bytes_reserved, "
 		       "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
-		       "%llu total\n", bytes, data_sinfo->bytes_delalloc,
-		       data_sinfo->bytes_used, data_sinfo->bytes_reserved,
-		       data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
-		       data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+		       "%llu total\n", (unsigned long long)bytes,
+		       (unsigned long long)data_sinfo->bytes_delalloc,
+		       (unsigned long long)data_sinfo->bytes_used,
+		       (unsigned long long)data_sinfo->bytes_reserved,
+		       (unsigned long long)data_sinfo->bytes_pinned,
+		       (unsigned long long)data_sinfo->bytes_readonly,
+		       (unsigned long long)data_sinfo->bytes_may_use,
+		       (unsigned long long)data_sinfo->total_bytes);
 		return -ENOSPC;
 	}
 	data_sinfo->bytes_may_use += bytes;
@@ -2824,9 +2828,12 @@ static void dump_space_info(struct btrfs_space_info *info, u64 bytes)
 				    info->bytes_pinned - info->bytes_reserved),
 	       (info->full) ? "" : "not ");
 	printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
-	       " may_use=%llu, used=%llu\n", info->total_bytes,
-	       info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
-	       info->bytes_used);
+	       " may_use=%llu, used=%llu\n",
+	       (unsigned long long)info->total_bytes,
+	       (unsigned long long)info->bytes_pinned,
+	       (unsigned long long)info->bytes_delalloc,
+	       (unsigned long long)info->bytes_may_use,
+	       (unsigned long long)info->bytes_used);
 
 	down_read(&info->groups_sem);
 	list_for_each_entry(cache, &info->block_groups, list) {
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 768b9523662..0bc93657b46 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -332,13 +332,17 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			printk(KERN_ERR "couldn't find space %llu to free\n",
 			       (unsigned long long)offset);
 			printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
-			       block_group->cached, block_group->key.objectid,
-			       block_group->key.offset);
+			       block_group->cached,
+			       (unsigned long long)block_group->key.objectid,
+			       (unsigned long long)block_group->key.offset);
 			btrfs_dump_free_space(block_group, bytes);
 		} else if (info) {
 			printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
 			       "but wanted offset=%llu bytes=%llu\n",
-			       info->offset, info->bytes, offset, bytes);
+			       (unsigned long long)info->offset,
+			       (unsigned long long)info->bytes,
+			       (unsigned long long)offset,
+			       (unsigned long long)bytes);
 		}
 		WARN_ON(1);
 	}
@@ -357,8 +361,9 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
 		info = rb_entry(n, struct btrfs_free_space, offset_index);
 		if (info->bytes >= bytes)
 			count++;
-		printk(KERN_ERR "entry offset %llu, bytes %llu\n", info->offset,
-		       info->bytes);
+		printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+		       (unsigned long long)info->offset,
+		       (unsigned long long)info->bytes);
 	}
 	printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
 	       "\n", count);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index f4e5d2e5ece..48762aa1e94 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -483,11 +483,13 @@ static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
 		*devstr = '\0';
 		devstr = vol_args->name;
 		devid = simple_strtoull(devstr, &end, 10);
-		printk(KERN_INFO "resizing devid %llu\n", devid);
+		printk(KERN_INFO "resizing devid %llu\n",
+		       (unsigned long long)devid);
 	}
 	device = btrfs_find_device(root, devid, NULL, NULL);
 	if (!device) {
-		printk(KERN_INFO "resizer unable to find device %llu\n", devid);
+		printk(KERN_INFO "resizer unable to find device %llu\n",
+		       (unsigned long long)devid);
 		ret = -EINVAL;
 		goto out_unlock;
 	}
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 30c9a8ca2a5..bf0e84c7560 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -196,7 +196,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 				info->max_extent = max_t(u64,
 					info->max_extent, root->sectorsize);
 				printk(KERN_INFO "btrfs: max_extent at %llu\n",
-				       info->max_extent);
+				       (unsigned long long)info->max_extent);
 			}
 			break;
 		case Opt_max_inline:
@@ -211,7 +211,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 						root->sectorsize);
 				}
 				printk(KERN_INFO "btrfs: max_inline at %llu\n",
-					info->max_inline);
+					(unsigned long long)info->max_inline);
 			}
 			break;
 		case Opt_alloc_start:
@@ -221,7 +221,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 				kfree(num);
 				printk(KERN_INFO
 					"btrfs: allocations start at %llu\n",
-					info->alloc_start);
+					(unsigned long long)info->alloc_start);
 			}
 			break;
 		case Opt_noacl:
@@ -420,11 +420,14 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (btrfs_test_opt(root, NOBARRIER))
 		seq_puts(seq, ",nobarrier");
 	if (info->max_extent != (u64)-1)
-		seq_printf(seq, ",max_extent=%llu", info->max_extent);
+		seq_printf(seq, ",max_extent=%llu",
+			   (unsigned long long)info->max_extent);
 	if (info->max_inline != 8192 * 1024)
-		seq_printf(seq, ",max_inline=%llu", info->max_inline);
+		seq_printf(seq, ",max_inline=%llu",
+			   (unsigned long long)info->max_inline);
 	if (info->alloc_start != 0)
-		seq_printf(seq, ",alloc_start=%llu", info->alloc_start);
+		seq_printf(seq, ",alloc_start=%llu",
+			   (unsigned long long)info->alloc_start);
 	if (info->thread_pool_size !=  min_t(unsigned long,
 					     num_online_cpus() + 2, 8))
 		seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
-- 
GitLab


From 96bcc722c47d07b6fd05c9d0cb3ab8ea5574c5b1 Mon Sep 17 00:00:00 2001
From: Peter Jones <pjones@redhat.com>
Date: Fri, 11 Jul 2008 16:17:05 -0400
Subject: [PATCH 0874/1421] [SCSI] sr: report more accurate drive status after
 closing the tray.

So, what's happening here is that the drive is reporting a sense of
2/4/1 ("logical unit is becoming ready") from sr_test_unit_ready(), and
then we ask for the media event notification before checking that result
at all.  The check_media_event_descriptor() call isn't getting a check
condition, but it's also reporting that the tray is closed and that
there's no media.  In actuality it doesn't yet know if there's media or
not, but there's no way to express that in the media event status field.

My current thought is that if it told us the device isn't yet ready, we
should return that immediately, since there's nothing that'll tell us
any more data than that reliably:

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sr_ioctl.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index d92ff512d21..291236e6e43 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -309,6 +309,11 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot)
 	if (0 == sr_test_unit_ready(cd->device, &sshdr))
 		return CDS_DISC_OK;
 
+	/* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */
+	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
+			&& sshdr.asc == 0x04 && sshdr.ascq == 0x01)
+		return CDS_DRIVE_NOT_READY;
+
 	if (!cdrom_get_media_event(cdi, &med)) {
 		if (med.media_present)
 			return CDS_DISC_OK;
-- 
GitLab


From e7ee4cc04b058d1eae9c1ac359031301b1798e3f Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 4 Apr 2009 00:35:42 +0900
Subject: [PATCH 0875/1421] [SCSI] sg: return EFAULT for an invalid user
 address

blk_rq_unmap_user() returns EFAULT if a program passes an invalid
address to kernel (the kernel fails to copy data to user space). sg
needs to pass the returned value to user space instead of ignoring
it. Before the block layer conversion, sg returns EFAULT
properly. This restores the old behavior.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sg.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 82312df9b0b..e1716f14cd4 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -179,7 +179,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */
 /* tasklet or soft irq callback */
 static void sg_rq_end_io(struct request *rq, int uptodate);
 static int sg_start_req(Sg_request *srp, unsigned char *cmd);
-static void sg_finish_rem_req(Sg_request * srp);
+static int sg_finish_rem_req(Sg_request * srp);
 static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size);
 static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count,
 			   Sg_request * srp);
@@ -518,7 +518,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
 		goto err_out;
 	}
 err_out:
-	sg_finish_rem_req(srp);
+	err = sg_finish_rem_req(srp);
 	return (0 == err) ? count : err;
 }
 
@@ -1696,9 +1696,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd)
 	return res;
 }
 
-static void
-sg_finish_rem_req(Sg_request * srp)
+static int sg_finish_rem_req(Sg_request * srp)
 {
+	int ret = 0;
+
 	Sg_fd *sfp = srp->parentfp;
 	Sg_scatter_hold *req_schp = &srp->data;
 
@@ -1710,12 +1711,14 @@ sg_finish_rem_req(Sg_request * srp)
 
 	if (srp->rq) {
 		if (srp->bio)
-			blk_rq_unmap_user(srp->bio);
+			ret = blk_rq_unmap_user(srp->bio);
 
 		blk_put_request(srp->rq);
 	}
 
 	sg_remove_request(sfp, srp);
+
+	return ret;
 }
 
 static int
-- 
GitLab


From 3621a710a7dbb2d22a8e95d94bcf0c2d13ef57fc Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Mon, 6 Apr 2009 18:47:14 -0400
Subject: [PATCH 0876/1421] [SCSI] lpfc 8.3.1 : Fix up kernel-doc function
 comments

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/lpfc/lpfc_attr.c    | 199 +++++++++++++++----------------
 drivers/scsi/lpfc/lpfc_debugfs.c |  40 +++----
 drivers/scsi/lpfc/lpfc_els.c     | 170 +++++++++++++-------------
 drivers/scsi/lpfc/lpfc_hbadisc.c |   8 +-
 drivers/scsi/lpfc/lpfc_init.c    | 101 ++++++++--------
 drivers/scsi/lpfc/lpfc_mbox.c    |  63 +++++-----
 drivers/scsi/lpfc/lpfc_mem.c     |  19 ++-
 drivers/scsi/lpfc/lpfc_scsi.c    |  79 ++++++------
 drivers/scsi/lpfc/lpfc_sli.c     | 180 +++++++++++++---------------
 drivers/scsi/lpfc/lpfc_vport.c   |  10 +-
 10 files changed, 424 insertions(+), 445 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 40cf0f4f327..69296cd6e9d 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -51,7 +51,7 @@
 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
 
 /**
- * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules.
+ * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
  * @incr: integer to convert.
  * @hdw: ascii string holding converted integer plus a string terminator.
  *
@@ -82,7 +82,7 @@ lpfc_jedec_to_ascii(int incr, char hdw[])
 }
 
 /**
- * lpfc_drvr_version_show: Return the Emulex driver string with version number.
+ * lpfc_drvr_version_show - Return the Emulex driver string with version number
  * @dev: class unused variable.
  * @attr: device attribute, not used.
  * @buf: on return contains the module description text.
@@ -152,7 +152,7 @@ lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_info_show: Return some pci info about the host in ascii.
+ * lpfc_info_show - Return some pci info about the host in ascii
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the formatted text from lpfc_info().
@@ -169,7 +169,7 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_serialnum_show: Return the hba serial number in ascii.
+ * lpfc_serialnum_show - Return the hba serial number in ascii
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the formatted text serial number.
@@ -188,7 +188,7 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_temp_sensor_show: Return the temperature sensor level.
+ * lpfc_temp_sensor_show - Return the temperature sensor level
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the formatted support level.
@@ -210,7 +210,7 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_modeldesc_show: Return the model description of the hba.
+ * lpfc_modeldesc_show - Return the model description of the hba
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the scsi vpd model description.
@@ -229,7 +229,7 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_modelname_show: Return the model name of the hba.
+ * lpfc_modelname_show - Return the model name of the hba
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the scsi vpd model name.
@@ -248,7 +248,7 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_programtype_show: Return the program type of the hba.
+ * lpfc_programtype_show - Return the program type of the hba
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the scsi vpd program type.
@@ -267,7 +267,7 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag.
+ * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the Menlo Maintenance sli flag.
@@ -286,7 +286,7 @@ lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 /**
- * lpfc_vportnum_show: Return the port number in ascii of the hba.
+ * lpfc_vportnum_show - Return the port number in ascii of the hba
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains scsi vpd program type.
@@ -305,7 +305,7 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_fwrev_show: Return the firmware rev running in the hba.
+ * lpfc_fwrev_show - Return the firmware rev running in the hba
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the scsi vpd program type.
@@ -326,7 +326,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_hdw_show: Return the jedec information about the hba.
+ * lpfc_hdw_show - Return the jedec information about the hba
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the scsi vpd program type.
@@ -347,7 +347,7 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 /**
- * lpfc_option_rom_version_show: Return the adapter ROM FCode version.
+ * lpfc_option_rom_version_show - Return the adapter ROM FCode version
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the ROM and FCode ascii strings.
@@ -366,7 +366,7 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_state_show: Return the link state of the port.
+ * lpfc_state_show - Return the link state of the port
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains text describing the state of the link.
@@ -451,7 +451,7 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports.
+ * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the sum of fc mapped and unmapped.
@@ -474,7 +474,7 @@ lpfc_num_discovered_ports_show(struct device *dev,
 }
 
 /**
- * lpfc_issue_lip: Misnomer, name carried over from long ago.
+ * lpfc_issue_lip - Misnomer, name carried over from long ago
  * @shost: Scsi_Host pointer.
  *
  * Description:
@@ -529,7 +529,7 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_do_offline: Issues a mailbox command to bring the link down.
+ * lpfc_do_offline - Issues a mailbox command to bring the link down
  * @phba: lpfc_hba pointer.
  * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
  *
@@ -537,7 +537,7 @@ lpfc_issue_lip(struct Scsi_Host *shost)
  * Assumes any error from lpfc_do_offline() will be negative.
  * Can wait up to 5 seconds for the port ring buffers count
  * to reach zero, prints a warning if it is not zero and continues.
- * lpfc_workq_post_event() returns a non-zero return coce if call fails.
+ * lpfc_workq_post_event() returns a non-zero return code if call fails.
  *
  * Returns:
  * -EIO error posting the event
@@ -591,7 +591,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
 }
 
 /**
- * lpfc_selective_reset: Offline then onlines the port.
+ * lpfc_selective_reset - Offline then onlines the port
  * @phba: lpfc_hba pointer.
  *
  * Description:
@@ -632,7 +632,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_issue_reset: Selectively resets an adapter.
+ * lpfc_issue_reset - Selectively resets an adapter
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: containing the string "selective".
@@ -672,7 +672,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_nport_evt_cnt_show: Return the number of nport events.
+ * lpfc_nport_evt_cnt_show - Return the number of nport events
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the ascii number of nport events.
@@ -691,7 +691,7 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_board_mode_show: Return the state of the board.
+ * lpfc_board_mode_show - Return the state of the board
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the state of the adapter.
@@ -720,7 +720,7 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state.
+ * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: containing one of the strings "online", "offline", "warm" or "error".
@@ -766,14 +766,14 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_get_hba_info: Return various bits of informaton about the adapter.
+ * lpfc_get_hba_info - Return various bits of informaton about the adapter
  * @phba: pointer to the adapter structure.
- * @mxri max xri count.
- * @axri available xri count.
- * @mrpi max rpi count.
- * @arpi available rpi count.
- * @mvpi max vpi count.
- * @avpi available vpi count.
+ * @mxri: max xri count.
+ * @axri: available xri count.
+ * @mrpi: max rpi count.
+ * @arpi: available rpi count.
+ * @mvpi: max vpi count.
+ * @avpi: available vpi count.
  *
  * Description:
  * If an integer pointer for an count is not null then the value for the
@@ -846,7 +846,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_max_rpi_show: Return maximum rpi.
+ * lpfc_max_rpi_show - Return maximum rpi
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the maximum rpi count in decimal or "Unknown".
@@ -874,7 +874,7 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_used_rpi_show: Return maximum rpi minus available rpi.
+ * lpfc_used_rpi_show - Return maximum rpi minus available rpi
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: containing the used rpi count in decimal or "Unknown".
@@ -902,7 +902,7 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_max_xri_show: Return maximum xri.
+ * lpfc_max_xri_show - Return maximum xri
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the maximum xri count in decimal or "Unknown".
@@ -930,7 +930,7 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_used_xri_show: Return maximum xpi minus the available xpi.
+ * lpfc_used_xri_show - Return maximum xpi minus the available xpi
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the used xri count in decimal or "Unknown".
@@ -958,7 +958,7 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_max_vpi_show: Return maximum vpi.
+ * lpfc_max_vpi_show - Return maximum vpi
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the maximum vpi count in decimal or "Unknown".
@@ -986,7 +986,7 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_used_vpi_show: Return maximum vpi minus the available vpi.
+ * lpfc_used_vpi_show - Return maximum vpi minus the available vpi
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the used vpi count in decimal or "Unknown".
@@ -1014,7 +1014,7 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_npiv_info_show: Return text about NPIV support for the adapter.
+ * lpfc_npiv_info_show - Return text about NPIV support for the adapter
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: text that must be interpreted to determine if npiv is supported.
@@ -1042,7 +1042,7 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_poll_show: Return text about poll support for the adapter.
+ * lpfc_poll_show - Return text about poll support for the adapter
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: on return contains the cfg_poll in hex.
@@ -1064,7 +1064,7 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_poll_store: Set the value of cfg_poll for the adapter.
+ * lpfc_poll_store - Set the value of cfg_poll for the adapter
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: one or more lpfc_polling_flags values.
@@ -1136,7 +1136,7 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_param_show: Return a cfg attribute value in decimal.
+ * lpfc_param_show - Return a cfg attribute value in decimal
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1164,7 +1164,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_param_hex_show: Return a cfg attribute value in hex.
+ * lpfc_param_hex_show - Return a cfg attribute value in hex
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1173,7 +1173,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
  * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
  *
  * Returns: size of formatted string.
  **/
@@ -1192,7 +1192,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_param_init: Intializes a cfg attribute.
+ * lpfc_param_init - Intializes a cfg attribute
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1226,7 +1226,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \
 }
 
 /**
- * lpfc_param_set: Set a cfg attribute value.
+ * lpfc_param_set - Set a cfg attribute value
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1260,7 +1260,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \
 }
 
 /**
- * lpfc_param_store: Set a vport attribute value.
+ * lpfc_param_store - Set a vport attribute value
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1300,7 +1300,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_vport_param_show: Return decimal formatted cfg attribute value.
+ * lpfc_vport_param_show - Return decimal formatted cfg attribute value
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1326,17 +1326,17 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_vport_param_hex_show: Return hex formatted attribute value.
+ * lpfc_vport_param_hex_show - Return hex formatted attribute value
  *
  * Description:
  * Macro that given an attr e.g.
  * hba_queue_depth expands into a function with the name
  * lpfc_hba_queue_depth_show
  *
- * lpfc_##attr##_show: prints the attribute value in hexidecimal.
+ * lpfc_##attr##_show: prints the attribute value in hexadecimal.
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
  *
  * Returns: length of formatted string.
  **/
@@ -1353,7 +1353,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_vport_param_init: Initialize a vport cfg attribute.
+ * lpfc_vport_param_init - Initialize a vport cfg attribute
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1386,7 +1386,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \
 }
 
 /**
- * lpfc_vport_param_set: Set a vport cfg attribute.
+ * lpfc_vport_param_set - Set a vport cfg attribute
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
@@ -1417,7 +1417,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \
 }
 
 /**
- * lpfc_vport_param_store: Set a vport attribute.
+ * lpfc_vport_param_store - Set a vport attribute
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth
@@ -1576,7 +1576,7 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
 static char *lpfc_soft_wwn_key = "C99G71SL8032A";
 
 /**
- * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid.
+ * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: containing the string lpfc_soft_wwn_key.
@@ -1623,10 +1623,10 @@ static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL,
 		   lpfc_soft_wwn_enable_store);
 
 /**
- * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter.
+ * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
- * @buf: on return contains the wwpn in hexidecimal.
+ * @buf: on return contains the wwpn in hexadecimal.
  *
  * Returns: size of formatted string.
  **/
@@ -1643,10 +1643,10 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_soft_wwpn_store: Set the ww port name of the adapter.
+ * lpfc_soft_wwpn_store - Set the ww port name of the adapter
  * @dev class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
- * @buf: contains the wwpn in hexidecimal.
+ * @buf: contains the wwpn in hexadecimal.
  * @count: number of wwpn bytes in buf
  *
  * Returns:
@@ -1729,10 +1729,10 @@ static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\
 		   lpfc_soft_wwpn_show, lpfc_soft_wwpn_store);
 
 /**
- * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter.
+ * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
- * @buf: on return contains the wwnn in hexidecimal.
+ * @buf: on return contains the wwnn in hexadecimal.
  *
  * Returns: size of formatted string.
  **/
@@ -1747,9 +1747,9 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_soft_wwnn_store: sets the ww node name of the adapter.
+ * lpfc_soft_wwnn_store - sets the ww node name of the adapter
  * @cdev: class device that is converted into a Scsi_host.
- * @buf: contains the ww node name in hexidecimal.
+ * @buf: contains the ww node name in hexadecimal.
  * @count: number of wwnn bytes in buf.
  *
  * Returns:
@@ -1845,7 +1845,7 @@ MODULE_PARM_DESC(lpfc_nodev_tmo,
 		 "for a device to come back");
 
 /**
- * lpfc_nodev_tmo_show: Return the hba dev loss timeout value.
+ * lpfc_nodev_tmo_show - Return the hba dev loss timeout value
  * @dev: class converted to a Scsi_host structure.
  * @attr: device attribute, not used.
  * @buf: on return contains the dev loss timeout in decimal.
@@ -1864,7 +1864,7 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr,
 }
 
 /**
- * lpfc_nodev_tmo_init: Set the hba nodev timeout value.
+ * lpfc_nodev_tmo_init - Set the hba nodev timeout value
  * @vport: lpfc vport structure pointer.
  * @val: contains the nodev timeout value.
  *
@@ -1905,7 +1905,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val)
 }
 
 /**
- * lpfc_update_rport_devloss_tmo: Update dev loss tmo value.
+ * lpfc_update_rport_devloss_tmo - Update dev loss tmo value
  * @vport: lpfc vport structure pointer.
  *
  * Description:
@@ -1926,7 +1926,7 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values.
+ * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
  * @vport: lpfc vport structure pointer.
  * @val: contains the tmo value.
  *
@@ -1982,7 +1982,7 @@ lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
 lpfc_vport_param_show(devloss_tmo)
 
 /**
- * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit.
+ * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
  * @vport: lpfc vport structure pointer.
  * @val: contains the tmo value.
  *
@@ -2094,7 +2094,7 @@ MODULE_PARM_DESC(lpfc_restrict_login,
 lpfc_vport_param_show(restrict_login);
 
 /**
- * lpfc_restrict_login_init: Set the vport restrict login flag.
+ * lpfc_restrict_login_init - Set the vport restrict login flag
  * @vport: lpfc vport structure pointer.
  * @val: contains the restrict login value.
  *
@@ -2128,7 +2128,7 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val)
 }
 
 /**
- * lpfc_restrict_login_set: Set the vport restrict login flag.
+ * lpfc_restrict_login_set - Set the vport restrict login flag
  * @vport: lpfc vport structure pointer.
  * @val: contains the restrict login value.
  *
@@ -2201,7 +2201,7 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
 */
 
 /**
- * lpfc_topology_set: Set the adapters topology field.
+ * lpfc_topology_set - Set the adapters topology field
  * @phba: lpfc_hba pointer.
  * @val: topology value.
  *
@@ -2246,8 +2246,7 @@ static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
 
 
 /**
- * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl
- *  sysfs file.
+ * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
  * @dev: Pointer to class device.
  * @buf: Data buffer.
  * @count: Size of the data buffer.
@@ -2411,8 +2410,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 
 
 /**
- * lpfc_stat_data_ctrl_show: Read callback function for
- *   lpfc_stat_data_ctrl sysfs file.
+ * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
  * @dev: Pointer to class device object.
  * @buf: Data buffer.
  *
@@ -2489,8 +2487,7 @@ static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR,
 
 
 /**
- * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data
- *  sysfs attribute.
+ * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute
  * @kobj: Pointer to the kernel object
  * @bin_attr: Attribute object
  * @buff: Buffer pointer
@@ -2585,7 +2582,7 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
 */
 
 /**
- * lpfc_link_speed_set: Set the adapters link speed.
+ * lpfc_link_speed_set - Set the adapters link speed
  * @phba: lpfc_hba pointer.
  * @val: link speed value.
  *
@@ -2637,7 +2634,7 @@ MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
 lpfc_param_show(link_speed)
 
 /**
- * lpfc_link_speed_init: Set the adapters link speed.
+ * lpfc_link_speed_init - Set the adapters link speed
  * @phba: lpfc_hba pointer.
  * @val: link speed value.
  *
@@ -2865,7 +2862,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
 
 
 /*
- * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
  * This value can be set to values between 64 and 256. The default value is
  * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
  * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
@@ -2967,7 +2964,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
 };
 
 /**
- * sysfs_ctlreg_write: Write method for writing to ctlreg.
+ * sysfs_ctlreg_write - Write method for writing to ctlreg
  * @kobj: kernel kobject that contains the kernel class device.
  * @bin_attr: kernel attributes passed to us.
  * @buf: contains the data to be written to the adapter IOREG space.
@@ -3017,7 +3014,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 }
 
 /**
- * sysfs_ctlreg_read: Read method for reading from ctlreg.
+ * sysfs_ctlreg_read - Read method for reading from ctlreg
  * @kobj: kernel kobject that contains the kernel class device.
  * @bin_attr: kernel attributes passed to us.
  * @buf: if succesful contains the data from the adapter IOREG space.
@@ -3078,7 +3075,7 @@ static struct bin_attribute sysfs_ctlreg_attr = {
 };
 
 /**
- * sysfs_mbox_idle: frees the sysfs mailbox.
+ * sysfs_mbox_idle - frees the sysfs mailbox
  * @phba: lpfc_hba pointer
  **/
 static void
@@ -3095,7 +3092,7 @@ sysfs_mbox_idle(struct lpfc_hba *phba)
 }
 
 /**
- * sysfs_mbox_write: Write method for writing information via mbox.
+ * sysfs_mbox_write - Write method for writing information via mbox
  * @kobj: kernel kobject that contains the kernel class device.
  * @bin_attr: kernel attributes passed to us.
  * @buf: contains the data to be written to sysfs mbox.
@@ -3170,7 +3167,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 }
 
 /**
- * sysfs_mbox_read: Read method for reading information via mbox.
+ * sysfs_mbox_read - Read method for reading information via mbox
  * @kobj: kernel kobject that contains the kernel class device.
  * @bin_attr: kernel attributes passed to us.
  * @buf: contains the data to be read from sysfs mbox.
@@ -3374,7 +3371,7 @@ static struct bin_attribute sysfs_mbox_attr = {
 };
 
 /**
- * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries.
+ * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
  * @vport: address of lpfc vport structure.
  *
  * Return codes:
@@ -3415,7 +3412,7 @@ out:
 }
 
 /**
- * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries.
+ * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
  * @vport: address of lpfc vport structure.
  **/
 void
@@ -3437,7 +3434,7 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport)
  */
 
 /**
- * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id.
+ * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
  * @shost: kernel scsi host pointer.
  **/
 static void
@@ -3450,7 +3447,7 @@ lpfc_get_host_port_id(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_get_host_port_type: Set the value of the scsi host port type.
+ * lpfc_get_host_port_type - Set the value of the scsi host port type
  * @shost: kernel scsi host pointer.
  **/
 static void
@@ -3482,7 +3479,7 @@ lpfc_get_host_port_type(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_get_host_port_state: Set the value of the scsi host port state.
+ * lpfc_get_host_port_state - Set the value of the scsi host port state
  * @shost: kernel scsi host pointer.
  **/
 static void
@@ -3520,7 +3517,7 @@ lpfc_get_host_port_state(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_get_host_speed: Set the value of the scsi host speed.
+ * lpfc_get_host_speed - Set the value of the scsi host speed
  * @shost: kernel scsi host pointer.
  **/
 static void
@@ -3556,7 +3553,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name.
+ * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
  * @shost: kernel scsi host pointer.
  **/
 static void
@@ -3582,7 +3579,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_get_stats: Return statistical information about the adapter.
+ * lpfc_get_stats - Return statistical information about the adapter
  * @shost: kernel scsi host pointer.
  *
  * Notes:
@@ -3707,7 +3704,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_reset_stats: Copy the adapter link stats information.
+ * lpfc_reset_stats - Copy the adapter link stats information
  * @shost: kernel scsi host pointer.
  **/
 static void
@@ -3788,7 +3785,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
  */
 
 /**
- * lpfc_get_node_by_target: Return the nodelist for a target.
+ * lpfc_get_node_by_target - Return the nodelist for a target
  * @starget: kernel scsi target pointer.
  *
  * Returns:
@@ -3817,7 +3814,7 @@ lpfc_get_node_by_target(struct scsi_target *starget)
 }
 
 /**
- * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1.
+ * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
  * @starget: kernel scsi target pointer.
  **/
 static void
@@ -3829,7 +3826,7 @@ lpfc_get_starget_port_id(struct scsi_target *starget)
 }
 
 /**
- * lpfc_get_starget_node_name: Set the target node name.
+ * lpfc_get_starget_node_name - Set the target node name
  * @starget: kernel scsi target pointer.
  *
  * Description: Set the target node name to the ndlp node name wwn or zero.
@@ -3844,7 +3841,7 @@ lpfc_get_starget_node_name(struct scsi_target *starget)
 }
 
 /**
- * lpfc_get_starget_port_name: Set the target port name.
+ * lpfc_get_starget_port_name - Set the target port name
  * @starget: kernel scsi target pointer.
  *
  * Description:  set the target port name to the ndlp port name wwn or zero.
@@ -3859,7 +3856,7 @@ lpfc_get_starget_port_name(struct scsi_target *starget)
 }
 
 /**
- * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo.
+ * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
  * @rport: fc rport address.
  * @timeout: new value for dev loss tmo.
  *
@@ -3877,7 +3874,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 }
 
 /**
- * lpfc_rport_show_function: Return rport target information.
+ * lpfc_rport_show_function - Return rport target information
  *
  * Description:
  * Macro that uses field to generate a function with the name lpfc_show_rport_
@@ -3905,7 +3902,7 @@ lpfc_show_rport_##field (struct device *dev,				\
 static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
 
 /**
- * lpfc_set_vport_symbolic_name: Set the vport's symbolic name.
+ * lpfc_set_vport_symbolic_name - Set the vport's symbolic name
  * @fc_vport: The fc_vport who's symbolic name has been changed.
  *
  * Description:
@@ -4048,7 +4045,7 @@ struct fc_function_template lpfc_vport_transport_functions = {
 };
 
 /**
- * lpfc_get_cfgparam: Used during probe_one to init the adapter structure.
+ * lpfc_get_cfgparam - Used during probe_one to init the adapter structure
  * @phba: lpfc_hba pointer.
  **/
 void
@@ -4097,7 +4094,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_get_vport_cfgparam: Used during port create, init the vport structure.
+ * lpfc_get_vport_cfgparam - Used during port create, init the vport structure
  * @vport: lpfc_vport pointer.
  **/
 void
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 81cdcf46c47..abb870e595b 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -47,7 +47,7 @@
 #include "lpfc_debugfs.h"
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/**
+/*
  * debugfs interface
  *
  * To access this interface the user should:
@@ -127,7 +127,7 @@ static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0);
 static unsigned long lpfc_debugfs_start_time = 0L;
 
 /**
- * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer.
+ * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
  * @vport: The vport to gather the log info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -187,7 +187,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)
 }
 
 /**
- * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer.
+ * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
  * @phba: The HBA to gather the log info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -250,7 +250,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)
 static int lpfc_debugfs_last_hbq = -1;
 
 /**
- * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer.
+ * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
  * @phba: The HBA to gather host buffer info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -369,7 +369,7 @@ skipit:
 static int lpfc_debugfs_last_hba_slim_off;
 
 /**
- * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer.
+ * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
  * @phba: The HBA to gather SLIM info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -426,7 +426,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size)
 }
 
 /**
- * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer.
+ * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
  * @phba: The HBA to gather Host SLIM info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -501,7 +501,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
 }
 
 /**
- * lpfc_debugfs_nodelist_data - Dump target node list to a buffer.
+ * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
  * @vport: The vport to gather target node info from.
  * @buf: The buffer to dump log into.
  * @size: The maximum amount of data to process.
@@ -599,7 +599,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)
 #endif
 
 /**
- * lpfc_debugfs_disc_trc - Store discovery trace log.
+ * lpfc_debugfs_disc_trc - Store discovery trace log
  * @vport: The vport to associate this trace string with for retrieval.
  * @mask: Log entry classification.
  * @fmt: Format string to be displayed when dumping the log.
@@ -643,7 +643,7 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt,
 }
 
 /**
- * lpfc_debugfs_slow_ring_trc - Store slow ring trace log.
+ * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
  * @phba: The phba to associate this trace string with for retrieval.
  * @fmt: Format string to be displayed when dumping the log.
  * @data1: 1st data parameter to be applied to @fmt.
@@ -682,7 +682,7 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt,
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 /**
- * lpfc_debugfs_disc_trc_open - Open the discovery trace log.
+ * lpfc_debugfs_disc_trc_open - Open the discovery trace log
  * @inode: The inode pointer that contains a vport pointer.
  * @file: The file pointer to attach the log output.
  *
@@ -732,7 +732,7 @@ out:
 }
 
 /**
- * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log.
+ * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
  * @inode: The inode pointer that contains a vport pointer.
  * @file: The file pointer to attach the log output.
  *
@@ -782,7 +782,7 @@ out:
 }
 
 /**
- * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer.
+ * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
  * @inode: The inode pointer that contains a vport pointer.
  * @file: The file pointer to attach the log output.
  *
@@ -824,7 +824,7 @@ out:
 }
 
 /**
- * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
  * @inode: The inode pointer that contains a vport pointer.
  * @file: The file pointer to attach the log output.
  *
@@ -866,7 +866,7 @@ out:
 }
 
 /**
- * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
  * @inode: The inode pointer that contains a vport pointer.
  * @file: The file pointer to attach the log output.
  *
@@ -993,7 +993,7 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf,
 
 
 /**
- * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file.
+ * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
  * @inode: The inode pointer that contains a vport pointer.
  * @file: The file pointer to attach the log output.
  *
@@ -1035,7 +1035,7 @@ out:
 }
 
 /**
- * lpfc_debugfs_lseek - Seek through a debugfs file.
+ * lpfc_debugfs_lseek - Seek through a debugfs file
  * @file: The file pointer to seek through.
  * @off: The offset to seek to or the amount to seek by.
  * @whence: Indicates how to seek.
@@ -1073,7 +1073,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence)
 }
 
 /**
- * lpfc_debugfs_read - Read a debugfs file.
+ * lpfc_debugfs_read - Read a debugfs file
  * @file: The file pointer to read from.
  * @buf: The buffer to copy the data to.
  * @nbytes: The number of bytes to read.
@@ -1098,7 +1098,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf,
 }
 
 /**
- * lpfc_debugfs_release - Release the buffer used to store debugfs file data.
+ * lpfc_debugfs_release - Release the buffer used to store debugfs file data
  * @inode: The inode pointer that contains a vport pointer. (unused)
  * @file: The file pointer that contains the buffer to release.
  *
@@ -1210,7 +1210,7 @@ static atomic_t lpfc_debugfs_hba_count;
 #endif
 
 /**
- * lpfc_debugfs_initialize - Initialize debugfs for a vport.
+ * lpfc_debugfs_initialize - Initialize debugfs for a vport
  * @vport: The vport pointer to initialize.
  *
  * Description:
@@ -1434,7 +1434,7 @@ debug_failed:
 }
 
 /**
- * lpfc_debugfs_terminate -  Tear down debugfs infrastructure for this vport.
+ * lpfc_debugfs_terminate -  Tear down debugfs infrastructure for this vport
  * @vport: The vport pointer to remove from debugfs.
  *
  * Description:
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a7302480bc4..d32c98bcf0c 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -55,7 +55,7 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba,
 static int lpfc_max_els_tries = 3;
 
 /**
- * lpfc_els_chk_latt: Check host link attention event for a vport.
+ * lpfc_els_chk_latt - Check host link attention event for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine checks whether there is an outstanding host link
@@ -116,7 +116,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure.
+ * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
  * @vport: pointer to a host virtual N_Port data structure.
  * @expectRsp: flag indicating whether response is expected.
  * @cmdSize: size of the ELS command.
@@ -290,7 +290,7 @@ els_iocb_free_pcmb_exit:
 }
 
 /**
- * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport.
+ * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine issues a fabric registration login for a @vport. An
@@ -386,7 +386,7 @@ fail:
 }
 
 /**
- * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port.
+ * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @sp: pointer to service parameter data structure.
@@ -509,7 +509,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port.
+ * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @sp: pointer to service parameter data structure.
@@ -626,7 +626,7 @@ fail:
 }
 
 /**
- * lpfc_cmpl_els_flogi: Completion callback function for flogi.
+ * lpfc_cmpl_els_flogi - Completion callback function for flogi
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -751,7 +751,7 @@ out:
 }
 
 /**
- * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport.
+ * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @retry: number of retries to the command IOCB.
@@ -849,7 +849,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs.
+ * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
@@ -898,7 +898,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_initial_flogi: Issue an initial fabric login for a vport.
+ * lpfc_initial_flogi - Issue an initial fabric login for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine issues an initial Fabric Login (FLOGI) for the @vport
@@ -949,7 +949,7 @@ lpfc_initial_flogi(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport.
+ * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine issues an initial Fabric Discover (FDISC) for the @vport
@@ -998,7 +998,7 @@ lpfc_initial_fdisc(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_more_plogi: Check and issue remaining plogis for a vport.
+ * lpfc_more_plogi - Check and issue remaining plogis for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine checks whether there are more remaining Port Logins
@@ -1031,7 +1031,7 @@ lpfc_more_plogi(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp.
+ * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
  * @phba: pointer to lpfc hba data structure.
  * @prsp: pointer to response IOCB payload.
  * @ndlp: pointer to a node-list data structure.
@@ -1165,7 +1165,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 }
 
 /**
- * lpfc_end_rscn: Check and handle more rscn for a vport.
+ * lpfc_end_rscn - Check and handle more rscn for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine checks whether more Registration State Change
@@ -1197,7 +1197,7 @@ lpfc_end_rscn(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_cmpl_els_plogi: Completion callback function for plogi.
+ * lpfc_cmpl_els_plogi - Completion callback function for plogi
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -1322,7 +1322,7 @@ out:
 }
 
 /**
- * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport.
+ * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  * @did: destination port identifier.
  * @retry: number of retries to the command IOCB.
@@ -1401,7 +1401,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
 }
 
 /**
- * lpfc_cmpl_els_prli: Completion callback function for prli.
+ * lpfc_cmpl_els_prli - Completion callback function for prli
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -1472,7 +1472,7 @@ out:
 }
 
 /**
- * lpfc_issue_els_prli: Issue a prli iocb command for a vport.
+ * lpfc_issue_els_prli - Issue a prli iocb command for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @retry: number of retries to the command IOCB.
@@ -1562,7 +1562,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_rscn_disc: Perform rscn discovery for a vport.
+ * lpfc_rscn_disc - Perform rscn discovery for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine performs Registration State Change Notification (RSCN)
@@ -1588,7 +1588,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_adisc_done: Complete the adisc phase of discovery.
+ * lpfc_adisc_done - Complete the adisc phase of discovery
  * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
  *
  * This function is called when the final ADISC is completed during discovery.
@@ -1639,7 +1639,7 @@ lpfc_adisc_done(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_more_adisc: Issue more adisc as needed.
+ * lpfc_more_adisc - Issue more adisc as needed
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine determines whether there are more ndlps on a @vport
@@ -1672,7 +1672,7 @@ lpfc_more_adisc(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_cmpl_els_adisc: Completion callback function for adisc.
+ * lpfc_cmpl_els_adisc - Completion callback function for adisc
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -1760,7 +1760,7 @@ out:
 }
 
 /**
- * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport.
+ * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
  * @vport: pointer to a virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @retry: number of retries to the command IOCB.
@@ -1833,7 +1833,7 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_cmpl_els_logo: Completion callback function for logo.
+ * lpfc_cmpl_els_logo - Completion callback function for logo
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -1910,7 +1910,7 @@ out:
 }
 
 /**
- * lpfc_issue_els_logo: Issue a logo to an node on a vport.
+ * lpfc_issue_els_logo - Issue a logo to an node on a vport
  * @vport: pointer to a virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @retry: number of retries to the command IOCB.
@@ -1991,7 +1991,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_cmpl_els_cmd: Completion callback function for generic els command.
+ * lpfc_cmpl_els_cmd - Completion callback function for generic els command
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -2031,7 +2031,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_issue_els_scr: Issue a scr to an node on a vport.
+ * lpfc_issue_els_scr - Issue a scr to an node on a vport
  * @vport: pointer to a host virtual N_Port data structure.
  * @nportid: N_Port identifier to the remote node.
  * @retry: number of retries to the command IOCB.
@@ -2125,7 +2125,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 }
 
 /**
- * lpfc_issue_els_farpr: Issue a farp to an node on a vport.
+ * lpfc_issue_els_farpr - Issue a farp to an node on a vport
  * @vport: pointer to a host virtual N_Port data structure.
  * @nportid: N_Port identifier to the remote node.
  * @retry: number of retries to the command IOCB.
@@ -2236,7 +2236,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
 }
 
 /**
- * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry.
+ * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry
  * @vport: pointer to a host virtual N_Port data structure.
  * @nlp: pointer to a node-list data structure.
  *
@@ -2291,7 +2291,7 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp)
 }
 
 /**
- * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer.
+ * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer
  * @ptr: holder for the pointer to the timer function associated data (ndlp).
  *
  * This routine is invoked by the ndlp delayed-function timer to check
@@ -2333,7 +2333,7 @@ lpfc_els_retry_delay(unsigned long ptr)
 }
 
 /**
- * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function.
+ * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function
  * @ndlp: pointer to a node-list data structure.
  *
  * This routine is the worker-thread handler for processing the @ndlp delayed
@@ -2404,7 +2404,7 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp)
 }
 
 /**
- * lpfc_els_retry: Make retry decision on an els command iocb.
+ * lpfc_els_retry - Make retry decision on an els command iocb
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -2732,7 +2732,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb.
+ * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb
  * @phba: pointer to lpfc hba data structure.
  * @buf_ptr1: pointer to the lpfc DMA buffer data structure.
  *
@@ -2764,7 +2764,7 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1)
 }
 
 /**
- * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl.
+ * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl
  * @phba: pointer to lpfc hba data structure.
  * @buf_ptr: pointer to the lpfc dma buffer data structure.
  *
@@ -2784,7 +2784,7 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr)
 }
 
 /**
- * lpfc_els_free_iocb: Free a command iocb and its associated resources.
+ * lpfc_els_free_iocb - Free a command iocb and its associated resources
  * @phba: pointer to lpfc hba data structure.
  * @elsiocb: pointer to lpfc els command iocb data structure.
  *
@@ -2877,7 +2877,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb)
 }
 
 /**
- * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response.
+ * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -2931,7 +2931,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd.
+ * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -2965,7 +2965,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd.
+ * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -3136,7 +3136,7 @@ out:
 }
 
 /**
- * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command.
+ * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command
  * @vport: pointer to a host virtual N_Port data structure.
  * @flag: the els command code to be accepted.
  * @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -3275,7 +3275,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
 }
 
 /**
- * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command.
+ * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
  * @vport: pointer to a virtual N_Port data structure.
  * @rejectError:
  * @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -3356,7 +3356,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 }
 
 /**
- * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd.
+ * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd
  * @vport: pointer to a virtual N_Port data structure.
  * @oldiocb: pointer to the original lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -3431,7 +3431,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 }
 
 /**
- * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd.
+ * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd
  * @vport: pointer to a virtual N_Port data structure.
  * @oldiocb: pointer to the original lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -3529,7 +3529,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
 }
 
 /**
- * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command.
+ * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command
  * @vport: pointer to a virtual N_Port data structure.
  * @format: rnid command format.
  * @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -3635,7 +3635,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 }
 
 /**
- * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport.
+ * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine issues Address Discover (ADISC) ELS commands to those
@@ -3693,7 +3693,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc.
+ * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports
@@ -3752,7 +3752,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_els_flush_rscn: Clean up any rscn activities with a vport.
+ * lpfc_els_flush_rscn - Clean up any rscn activities with a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine cleans up any Registration State Change Notification
@@ -3791,7 +3791,7 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did.
+ * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did
  * @vport: pointer to a host virtual N_Port data structure.
  * @did: remote destination port identifier.
  *
@@ -3866,7 +3866,7 @@ return_did_out:
 }
 
 /**
- * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn
+ * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the
@@ -3895,7 +3895,7 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_send_rscn_event: Send an RSCN event to management application.
+ * lpfc_send_rscn_event - Send an RSCN event to management application
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  *
@@ -3938,7 +3938,7 @@ lpfc_send_rscn_event(struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb.
+ * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_handle_rscn: Handle rscn for a vport.
+ * lpfc_els_handle_rscn - Handle rscn for a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine handles the Registration State Configuration Notification
@@ -4222,7 +4222,7 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb.
+ * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4336,7 +4336,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb.
+ * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4391,7 +4391,7 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb.
+ * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4419,7 +4419,7 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd.
+ * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -4513,7 +4513,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_els_rcv_rps: Process an unsolicited rps iocb.
+ * lpfc_els_rcv_rps - Process an unsolicited rps iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4590,7 +4590,7 @@ reject_out:
 }
 
 /**
- * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command.
+ * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdsize: size of the ELS command.
  * @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -4662,7 +4662,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
 }
 
 /**
- * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb.
+ * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4721,7 +4721,7 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_rcv_farp: Process an unsolicited farp request els command.
+ * lpfc_els_rcv_farp - Process an unsolicited farp request els command
  * @vport: pointer to a virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4804,7 +4804,7 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb.
+ * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -4842,7 +4842,7 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_rcv_fan: Process an unsolicited fan iocb command.
+ * lpfc_els_rcv_fan - Process an unsolicited fan iocb command
  * @vport: pointer to a host virtual N_Port data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @fan_ndlp: pointer to a node-list data structure.
@@ -4890,7 +4890,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_els_timeout: Handler funciton to the els timer.
+ * lpfc_els_timeout - Handler funciton to the els timer
  * @ptr: holder for the timer function associated data.
  *
  * This routine is invoked by the ELS timer after timeout. It posts the ELS
@@ -4919,7 +4919,7 @@ lpfc_els_timeout(unsigned long ptr)
 }
 
 /**
- * lpfc_els_timeout_handler: Process an els timeout event.
+ * lpfc_els_timeout_handler - Process an els timeout event
  * @vport: pointer to a virtual N_Port data structure.
  *
  * This routine is the actual handler function that processes an ELS timeout
@@ -4994,7 +4994,7 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport.
+ * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport
  * @vport: pointer to a host virtual N_Port data structure.
  *
  * This routine is used to clean up all the outstanding ELS commands on a
@@ -5076,7 +5076,7 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA.
+ * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is used to clean up all the outstanding ELS commands on a
@@ -5137,7 +5137,7 @@ lpfc_els_flush_all_cmd(struct lpfc_hba  *phba)
 }
 
 /**
- * lpfc_send_els_failure_event: Posts an ELS command failure event.
+ * lpfc_send_els_failure_event - Posts an ELS command failure event
  * @phba: Pointer to hba context object.
  * @cmdiocbp: Pointer to command iocb which reported error.
  * @rspiocbp: Pointer to response iocb which reported error.
@@ -5204,7 +5204,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_send_els_event: Posts unsolicited els event.
+ * lpfc_send_els_event - Posts unsolicited els event
  * @vport: Pointer to vport object.
  * @ndlp: Pointer FC node object.
  * @cmd: ELS command code.
@@ -5284,7 +5284,7 @@ lpfc_send_els_event(struct lpfc_vport *vport,
 
 
 /**
- * lpfc_els_unsol_buffer: Process an unsolicited event data buffer.
+ * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
  * @phba: pointer to lpfc hba data structure.
  * @pring: pointer to a SLI ring.
  * @vport: pointer to a host virtual N_Port data structure.
@@ -5592,7 +5592,7 @@ dropit:
 }
 
 /**
- * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier.
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
  * @phba: pointer to lpfc hba data structure.
  * @vpi: host virtual N_Port identifier.
  *
@@ -5622,7 +5622,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
 }
 
 /**
- * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring.
+ * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
  * @phba: pointer to lpfc hba data structure.
  * @pring: pointer to a SLI ring.
  * @elsiocb: pointer to lpfc els iocb data structure.
@@ -5710,7 +5710,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr.
+ * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
  * @phba: pointer to lpfc hba data structure.
  * @vport: pointer to a virtual N_Port data structure.
  *
@@ -5781,7 +5781,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport.
+ * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -5850,7 +5850,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_register_new_vport: Register a new vport with a HBA.
+ * lpfc_register_new_vport - Register a new vport with a HBA
  * @phba: pointer to lpfc hba data structure.
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -5899,7 +5899,7 @@ mbox_err_exit:
 }
 
 /**
- * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command.
+ * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -6007,7 +6007,7 @@ out:
 }
 
 /**
- * lpfc_issue_els_fdisc: Issue a fdisc iocb command.
+ * lpfc_issue_els_fdisc - Issue a fdisc iocb command
  * @vport: pointer to a virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  * @retry: number of retries to the command IOCB.
@@ -6101,7 +6101,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_cmpl_els_npiv_logo: Completion function with vport logo.
+ * lpfc_cmpl_els_npiv_logo - Completion function with vport logo
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -6136,7 +6136,7 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_issue_els_npiv_logo: Issue a logo off a vport.
+ * lpfc_issue_els_npiv_logo - Issue a logo off a vport
  * @vport: pointer to a virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
  *
@@ -6197,7 +6197,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 }
 
 /**
- * lpfc_fabric_block_timeout: Handler function to the fabric block timer.
+ * lpfc_fabric_block_timeout - Handler function to the fabric block timer
  * @ptr: holder for the timer function associated data.
  *
  * This routine is invoked by the fabric iocb block timer after
@@ -6226,7 +6226,7 @@ lpfc_fabric_block_timeout(unsigned long ptr)
 }
 
 /**
- * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list.
+ * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine issues one fabric iocb from the driver internal list to
@@ -6285,7 +6285,7 @@ repeat:
 }
 
 /**
- * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command.
+ * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine unblocks the  issuing fabric iocb command. The function
@@ -6303,7 +6303,7 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_block_fabric_iocbs: Block issuing fabric iocb command.
+ * lpfc_block_fabric_iocbs - Block issuing fabric iocb command
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine blocks the issuing fabric iocb for a specified amount of
@@ -6325,7 +6325,7 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb.
+ * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
  * @rspiocb: pointer to lpfc response iocb data structure.
@@ -6384,7 +6384,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_issue_fabric_iocb: Issue a fabric iocb command.
+ * lpfc_issue_fabric_iocb - Issue a fabric iocb command
  * @phba: pointer to lpfc hba data structure.
  * @iocb: pointer to lpfc command iocb data structure.
  *
@@ -6453,7 +6453,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
 }
 
 /**
- * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list
  * @vport: pointer to a virtual N_Port data structure.
  *
  * This routine aborts all the IOCBs associated with a @vport from the
@@ -6493,7 +6493,7 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list
  * @ndlp: pointer to a node-list data structure.
  *
  * This routine aborts all the IOCBs associated with an @ndlp from the
@@ -6533,7 +6533,7 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
 }
 
 /**
- * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list.
+ * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine aborts all the IOCBs currently on the driver internal
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 311ed6dea72..9373a9e7485 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -276,7 +276,7 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
 }
 
 /**
- * lpfc_alloc_fast_evt: Allocates data structure for posting event.
+ * lpfc_alloc_fast_evt - Allocates data structure for posting event
  * @phba: Pointer to hba context object.
  *
  * This function is called from the functions which need to post
@@ -303,7 +303,7 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
 }
 
 /**
- * lpfc_free_fast_evt: Frees event data structure.
+ * lpfc_free_fast_evt - Frees event data structure
  * @phba: Pointer to hba context object.
  * @evt:  Event object which need to be freed.
  *
@@ -319,7 +319,7 @@ lpfc_free_fast_evt(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_send_fastpath_evt: Posts events generated from fast path.
+ * lpfc_send_fastpath_evt - Posts events generated from fast path
  * @phba: Pointer to hba context object.
  * @evtp: Event data structure.
  *
@@ -1858,7 +1858,7 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 				NLP_STE_UNUSED_NODE);
 }
 /**
- * lpfc_initialize_node: Initialize all fields of node object.
+ * lpfc_initialize_node - Initialize all fields of node object
  * @vport: Pointer to Virtual Port object.
  * @ndlp: Pointer to FC node object.
  * @did: FC_ID of the node.
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 06874e6009e..e3645e8f348 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -60,7 +60,7 @@ static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
 static DEFINE_IDR(lpfc_hba_index);
 
 /**
- * lpfc_config_port_prep: Perform lpfc initialization prior to config port.
+ * lpfc_config_port_prep - Perform lpfc initialization prior to config port
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
@@ -221,7 +221,7 @@ out_free_mbox:
 }
 
 /**
- * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd.
+ * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
  * @phba: pointer to lpfc hba data structure.
  * @pmboxq: pointer to the driver internal queue element for mailbox command.
  *
@@ -242,8 +242,7 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 }
 
 /**
- * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
- *     command used for getting wake up parameters.
+ * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
  * @phba: pointer to lpfc hba data structure.
  * @pmboxq: pointer to the driver internal queue element for mailbox command.
  *
@@ -287,7 +286,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 }
 
 /**
- * lpfc_config_port_post: Perform lpfc initialization after config port.
+ * lpfc_config_port_post - Perform lpfc initialization after config port
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine will do LPFC initialization after the CONFIG_PORT mailbox
@@ -551,7 +550,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset.
+ * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
  * @phba: pointer to lpfc HBA data structure.
  *
  * This routine will do LPFC uninitialization before the HBA is reset when
@@ -583,7 +582,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset.
+ * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
  * @phba: pointer to lpfc HBA data structure.
  *
  * This routine will do uninitialization after the HBA is reset when bring
@@ -652,7 +651,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_hb_timeout: The HBA-timer timeout handler.
+ * lpfc_hb_timeout - The HBA-timer timeout handler
  * @ptr: unsigned long holds the pointer to lpfc hba data structure.
  *
  * This is the HBA-timer timeout handler registered to the lpfc driver. When
@@ -686,7 +685,7 @@ lpfc_hb_timeout(unsigned long ptr)
 }
 
 /**
- * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function.
+ * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
  * @phba: pointer to lpfc hba data structure.
  * @pmboxq: pointer to the driver internal queue element for mailbox command.
  *
@@ -721,7 +720,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 }
 
 /**
- * lpfc_hb_timeout_handler: The HBA-timer timeout handler.
+ * lpfc_hb_timeout_handler - The HBA-timer timeout handler
  * @phba: pointer to lpfc hba data structure.
  *
  * This is the actual HBA-timer timeout handler to be invoked by the worker
@@ -830,7 +829,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_offline_eratt: Bring lpfc offline on hardware error attention.
+ * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is called to bring the HBA offline when HBA hardware error
@@ -857,7 +856,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_handle_eratt: The HBA hardware error handler.
+ * lpfc_handle_eratt - The HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to handle the following HBA hardware error
@@ -976,7 +975,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_handle_latt: The HBA link event handler.
+ * lpfc_handle_latt - The HBA link event handler
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked from the worker thread to handle a HBA host
@@ -1063,7 +1062,7 @@ lpfc_handle_latt_err_exit:
 }
 
 /**
- * lpfc_parse_vpd: Parse VPD (Vital Product Data).
+ * lpfc_parse_vpd - Parse VPD (Vital Product Data)
  * @phba: pointer to lpfc hba data structure.
  * @vpd: pointer to the vital product data.
  * @len: length of the vital product data in bytes.
@@ -1213,7 +1212,7 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
 }
 
 /**
- * lpfc_get_hba_model_desc: Retrieve HBA device model name and description.
+ * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
  * @phba: pointer to lpfc hba data structure.
  * @mdp: pointer to the data structure to hold the derived model name.
  * @descp: pointer to the data structure to hold the derived description.
@@ -1392,7 +1391,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 }
 
 /**
- * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring.
+ * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
  * @phba: pointer to lpfc hba data structure.
  * @pring: pointer to a IOCB ring.
  * @cnt: the number of IOCBs to be posted to the IOCB ring.
@@ -1493,7 +1492,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
 }
 
 /**
- * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring.
+ * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine posts initial receive IOCB buffers to the ELS ring. The
@@ -1518,7 +1517,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba)
 #define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
 
 /**
- * lpfc_sha_init: Set up initial array of hash table entries.
+ * lpfc_sha_init - Set up initial array of hash table entries
  * @HashResultPointer: pointer to an array as hash table.
  *
  * This routine sets up the initial values to the array of hash table entries
@@ -1535,7 +1534,7 @@ lpfc_sha_init(uint32_t * HashResultPointer)
 }
 
 /**
- * lpfc_sha_iterate: Iterate initial hash table with the working hash table.
+ * lpfc_sha_iterate - Iterate initial hash table with the working hash table
  * @HashResultPointer: pointer to an initial/result hash table.
  * @HashWorkingPointer: pointer to an working hash table.
  *
@@ -1592,7 +1591,7 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
 }
 
 /**
- * lpfc_challenge_key: Create challenge key based on WWPN of the HBA.
+ * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
  * @RandomChallenge: pointer to the entry of host challenge random number array.
  * @HashWorking: pointer to the entry of the working hash array.
  *
@@ -1608,7 +1607,7 @@ lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
 }
 
 /**
- * lpfc_hba_init: Perform special handling for LC HBA initialization.
+ * lpfc_hba_init - Perform special handling for LC HBA initialization
  * @phba: pointer to lpfc hba data structure.
  * @hbainit: pointer to an array of unsigned 32-bit integers.
  *
@@ -1637,7 +1636,7 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
 }
 
 /**
- * lpfc_cleanup: Performs vport cleanups before deleting a vport.
+ * lpfc_cleanup - Performs vport cleanups before deleting a vport
  * @vport: pointer to a virtual N_Port data structure.
  *
  * This routine performs the necessary cleanups before deleting the @vport.
@@ -1724,7 +1723,7 @@ lpfc_cleanup(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_stop_vport_timers: Stop all the timers associated with a vport.
+ * lpfc_stop_vport_timers - Stop all the timers associated with a vport
  * @vport: pointer to a virtual N_Port data structure.
  *
  * This routine stops all the timers associated with a @vport. This function
@@ -1741,7 +1740,7 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_stop_phba_timers: Stop all the timers associated with an HBA.
+ * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine stops all the timers associated with a HBA. This function is
@@ -1761,7 +1760,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked.
+ * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine marks a HBA's management interface as blocked. Once the HBA's
@@ -1781,7 +1780,7 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_online: Initialize and bring a HBA online.
+ * lpfc_online - Initialize and bring a HBA online
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine initializes the HBA and brings a HBA online. During this
@@ -1839,7 +1838,7 @@ lpfc_online(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked.
+ * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine marks a HBA's management interface as not blocked. Once the
@@ -1860,7 +1859,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_offline_prep: Prepare a HBA to be brought offline.
+ * lpfc_offline_prep - Prepare a HBA to be brought offline
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to prepare a HBA to be brought offline. It performs
@@ -1917,7 +1916,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_offline: Bring a HBA offline.
+ * lpfc_offline - Bring a HBA offline
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine actually brings a HBA offline. It stops all the timers
@@ -1962,7 +1961,7 @@ lpfc_offline(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists.
+ * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is to free all the SCSI buffers and IOCBs from the driver
@@ -2001,7 +2000,7 @@ lpfc_scsi_free(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_create_port: Create an FC port.
+ * lpfc_create_port - Create an FC port
  * @phba: pointer to lpfc hba data structure.
  * @instance: a unique integer ID to this FC port.
  * @dev: pointer to the device data structure.
@@ -2091,7 +2090,7 @@ out:
 }
 
 /**
- * destroy_port: Destroy an FC port.
+ * destroy_port -  destroy an FC port
  * @vport: pointer to an lpfc virtual N_Port data structure.
  *
  * This routine destroys a FC port from the upper layer protocol. All the
@@ -2116,7 +2115,7 @@ destroy_port(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_get_instance: Get a unique integer ID.
+ * lpfc_get_instance - Get a unique integer ID
  *
  * This routine allocates a unique integer ID from lpfc_hba_index pool. It
  * uses the kernel idr facility to perform the task.
@@ -2139,7 +2138,7 @@ lpfc_get_instance(void)
 }
 
 /**
- * lpfc_scan_finished: method for SCSI layer to detect whether scan is done.
+ * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
  * @shost: pointer to SCSI host data structure.
  * @time: elapsed time of the scan in jiffies.
  *
@@ -2197,7 +2196,7 @@ finished:
 }
 
 /**
- * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port.
+ * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
  * @shost: pointer to SCSI host data structure.
  *
  * This routine initializes a given SCSI host attributes on a FC port. The
@@ -2252,7 +2251,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
 }
 
 /**
- * lpfc_enable_msix: Enable MSI-X interrupt mode.
+ * lpfc_enable_msix - Enable MSI-X interrupt mode
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
@@ -2366,7 +2365,7 @@ msi_fail_out:
 }
 
 /**
- * lpfc_disable_msix: Disable MSI-X interrupt mode.
+ * lpfc_disable_msix - Disable MSI-X interrupt mode
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to release the MSI-X vectors and then disable the
@@ -2385,7 +2384,7 @@ lpfc_disable_msix(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_enable_msi: Enable MSI interrupt mode.
+ * lpfc_enable_msi - Enable MSI interrupt mode
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to enable the MSI interrupt mode. The kernel
@@ -2423,7 +2422,7 @@ lpfc_enable_msi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_disable_msi: Disable MSI interrupt mode.
+ * lpfc_disable_msi - Disable MSI interrupt mode
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to disable the MSI interrupt mode. The driver
@@ -2441,7 +2440,7 @@ lpfc_disable_msi(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_log_intr_mode: Log the active interrupt mode
+ * lpfc_log_intr_mode - Log the active interrupt mode
  * @phba: pointer to lpfc hba data structure.
  * @intr_mode: active interrupt mode adopted.
  *
@@ -2490,7 +2489,7 @@ lpfc_stop_port(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_enable_intr: Enable device interrupt.
+ * lpfc_enable_intr - Enable device interrupt
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to enable device interrupt and associate driver's
@@ -2547,7 +2546,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 }
 
 /**
- * lpfc_disable_intr: Disable device interrupt.
+ * lpfc_disable_intr - Disable device interrupt
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is invoked to disable device interrupt and disassociate the
@@ -2574,7 +2573,7 @@ lpfc_disable_intr(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
+ * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
  *
@@ -3010,7 +3009,7 @@ out:
 }
 
 /**
- * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem.
+ * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
  * @pdev: pointer to PCI device
  *
  * This routine is to be registered to the kernel's PCI subsystem. When an
@@ -3095,7 +3094,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
  * @pdev: pointer to PCI device
  * @msg: power management message
  *
@@ -3139,7 +3138,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
 }
 
 /**
- * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
+ * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
  * @pdev: pointer to PCI device
  *
  * This routine is to be registered to the kernel's PCI subsystem to support
@@ -3204,7 +3203,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
+ * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
  * @pdev: pointer to PCI device.
  * @state: the current PCI connection state.
  *
@@ -3254,7 +3253,7 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
 }
 
 /**
- * lpfc_io_slot_reset: Restart a PCI device from scratch.
+ * lpfc_io_slot_reset - Restart a PCI device from scratch
  * @pdev: pointer to PCI device.
  *
  * This routine is registered to the PCI subsystem for error handling. This is
@@ -3313,7 +3312,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
 }
 
 /**
- * lpfc_io_resume: Resume PCI I/O operation.
+ * lpfc_io_resume - Resume PCI I/O operation
  * @pdev: pointer to PCI device
  *
  * This routine is registered to the PCI subsystem for error handling. It is
@@ -3426,7 +3425,7 @@ static struct pci_driver lpfc_driver = {
 };
 
 /**
- * lpfc_init: lpfc module initialization routine.
+ * lpfc_init - lpfc module initialization routine
  *
  * This routine is to be invoked when the lpfc module is loaded into the
  * kernel. The special kernel macro module_init() is used to indicate the
@@ -3472,7 +3471,7 @@ lpfc_init(void)
 }
 
 /**
- * lpfc_exit: lpfc module removal routine.
+ * lpfc_exit - lpfc module removal routine
  *
  * This routine is invoked when the lpfc module is removed from the kernel.
  * The special kernel macro module_exit() is used to indicate the role of
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 34eeb086a66..134fc7fc212 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -39,7 +39,7 @@
 #include "lpfc_compat.h"
 
 /**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory.
+ * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @offset: offset for dumping VPD memory mailbox command.
@@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
 }
 
 /**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
+ * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
  * This function create a dump memory mailbox command to dump wake up
  * parameters.
  */
@@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
+ * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_async: Prepare a mailbox command for enabling HBA async event.
+ * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @ring: ring number for the asynchronous event to be configured.
@@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
 }
 
 /**
- * lpfc_heart_beat: Prepare a mailbox command for heart beat.
+ * lpfc_heart_beat - Prepare a mailbox command for heart beat
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_read_la: Prepare a mailbox command for reading HBA link attention.
+ * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @mp: DMA buffer memory for reading the link attention information into.
@@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
 }
 
 /**
- * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention.
+ * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA.
+ * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
+ * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @topology: the link topology for the link to be initialized to.
@@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba,
 }
 
 /**
- * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters.
+ * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @vpi: virtual N_Port identifier.
@@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 }
 
 /**
- * lpfc_unreg_did: Prepare a mailbox command for unregistering DID.
+ * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
 }
 
 /**
- * lpfc_read_config: Prepare a mailbox command for reading HBA configuration.
+ * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats.
+ * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_reg_login: Prepare a mailbox command for registering remote login.
+ * lpfc_reg_login - Prepare a mailbox command for registering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 }
 
 /**
- * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login.
+ * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @rpi: remote port identifier
@@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
 }
 
 /**
- * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier.
+ * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
@@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
 }
 
 /**
- * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id.
+ * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB)
+ * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB)
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine sets up and initializes the IOCB rings in the Port Control
@@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_read_rev: Prepare a mailbox command for reading HBA revision.
+ * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2.
+ * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2
  * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
  * @hbq_desc: pointer to the HBQ selection profile descriptor.
  *
@@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb,
 }
 
 /**
- * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3.
+ * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3
  * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
  * @hbq_desc: pointer to the HBQ selection profile descriptor.
  *
@@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb,
 }
 
 /**
- * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5.
+ * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5
  * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
  * @hbq_desc: pointer to the HBQ selection profile descriptor.
  *
@@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb,
 }
 
 /**
- * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ.
+ * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
  * @phba: pointer to lpfc hba data structure.
  * @id: HBQ identifier.
  * @hbq_desc: pointer to the HBA descriptor data structure.
@@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
 }
 
 /**
- * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring.
+ * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
  * @phba: pointer to lpfc hba data structure.
  * @ring:
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_port: Prepare a mailbox command for configuring port.
+ * lpfc_config_port - Prepare a mailbox command for configuring port
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_kill_board: Prepare a mailbox command for killing board.
+ * lpfc_kill_board - Prepare a mailbox command for killing board
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue.
+ * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
@@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
 }
 
 /**
- * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue.
+ * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue
  * @phba: pointer to lpfc hba data structure.
  *
  * Driver maintains a internal mailbox command queue implemented as a linked
@@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list.
+ * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
@@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
 }
 
 /**
- * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value.
+ * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
  * @phba: pointer to lpfc hba data structure.
  * @cmd: mailbox command code.
  *
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index a4bba206924..35a97673339 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -41,7 +41,7 @@
 
 
 /**
- * lpfc_mem_alloc: create and allocate all PCI and memory pools
+ * lpfc_mem_alloc - create and allocate all PCI and memory pools
  * @phba: HBA to allocate pools for
  *
  * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
@@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
  * @phba: HBA to free memory for
  *
  * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
  * lpfc_hbq_pool.  Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist.  Also frees the VPI bitmask.
+ * lpfc_nodelist.  Also frees the VPI bitmask
  *
  * Returns: None
  **/
@@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool
+ * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool
  * @phba: HBA which owns the pool to allocate from
  * @mem_flags: indicates if this is a priority (MEM_PRI) allocation
  * @handle: used to return the DMA-mapped address of the mbuf
@@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle)
 }
 
 /**
- * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
+ * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
  * @phba: HBA which owns the pool to return to
  * @virt: mbuf to free
  * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
@@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
 }
 
 /**
- * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
+ * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
  * @phba: HBA which owns the pool to return to
  * @virt: mbuf to free
  * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
@@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
  * Returns: None
  **/
 void
-
 lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
 {
 	unsigned long iflags;
@@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
 }
 
 /**
- * lpfc_els_hbq_alloc: Allocate an HBQ buffer
+ * lpfc_els_hbq_alloc - Allocate an HBQ buffer
  * @phba: HBA to allocate HBQ buffer for
  *
  * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
@@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
  * @phba: HBA buffer was allocated for
  * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
  *
@@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
 }
 
 /**
- * lpfc_in_buf_free: Free a DMA buffer
+ * lpfc_in_buf_free - Free a DMA buffer
  * @phba: HBA buffer is associated with
  * @mp: Buffer to free
  *
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 36fd2e75da1..6eedb23980d 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -112,7 +112,7 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
 }
 
 /**
- * lpfc_update_stats: Update statistical data for the command completion.
+ * lpfc_update_stats - Update statistical data for the command completion
  * @phba: Pointer to HBA object.
  * @lpfc_cmd: lpfc scsi command object pointer.
  *
@@ -165,8 +165,7 @@ lpfc_update_stats(struct lpfc_hba *phba, struct  lpfc_scsi_buf *lpfc_cmd)
 }
 
 /**
- * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
- *                   event.
+ * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
  * @phba: Pointer to HBA context object.
  * @vport: Pointer to vport object.
  * @ndlp: Pointer to FC node associated with the target.
@@ -220,7 +219,7 @@ lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread.
+ * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
  * @phba: The Hba for which this call is being executed.
  *
  * This routine is called when there is resource error in driver or firmware.
@@ -261,7 +260,7 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
  * @phba: The Hba for which this call is being executed.
  *
  * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
@@ -303,7 +302,7 @@ lpfc_rampup_queue_depth(struct lpfc_vport  *vport,
 }
 
 /**
- * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
  * @phba: The Hba for which this call is being executed.
  *
  * This routine is called to  process WORKER_RAMP_DOWN_QUEUE event for worker
@@ -361,7 +360,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
  * @phba: The Hba for which this call is being executed.
  *
  * This routine is called to  process WORKER_RAMP_UP_QUEUE event for worker
@@ -410,7 +409,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_scsi_dev_block: set all scsi hosts to block state.
+ * lpfc_scsi_dev_block - set all scsi hosts to block state
  * @phba: Pointer to HBA context object.
  *
  * This function walks vport list and set each SCSI host to block state
@@ -439,7 +438,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * lpfc_new_scsi_buf - Scsi buffer allocator
  * @vport: The virtual port for which this call being executed.
  *
  * This routine allocates a scsi buffer, which contains all the necessary
@@ -563,7 +562,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
  * @phba: The Hba for which this call is being executed.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
@@ -592,7 +591,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is being released.
  *
@@ -611,7 +610,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 }
 
 /**
- * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
  *
@@ -823,9 +822,9 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
 /**
  * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
  * @sc:             in: SCSI command
- * @apptagmask      out: app tag mask
- * @apptagval       out: app tag value
- * @reftag          out: ref tag (reference tag)
+ * @apptagmask:     out: app tag mask
+ * @apptagval:      out: app tag value
+ * @reftag:         out: ref tag (reference tag)
  *
  * Description:
  *   Extract DIF paramters from the command if possible.  Otherwise,
@@ -1413,7 +1412,7 @@ out:
 }
 
 /**
- * lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
+ * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
  * @phba: Pointer to hba context object.
  * @vport: Pointer to vport object.
  * @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
@@ -1505,7 +1504,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
  * @phba: The Hba for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
  *
@@ -1530,7 +1529,7 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
 }
 
 /**
- * lpfc_handler_fcp_err: FCP response handler.
+ * lpfc_handler_fcp_err - FCP response handler
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @rsp_iocb: The response IOCB which contains FCP error.
@@ -1674,7 +1673,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 }
 
 /**
- * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
  * @phba: The Hba for which this call is being executed.
  * @pIocbIn: The command IOCBQ for the scsi cmnd.
  * @pIocbOut: The response IOCBQ for the scsi cmnd .
@@ -1935,7 +1934,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 }
 
 /**
- * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
  * @data: A pointer to the immediate command data portion of the IOCB.
  * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
  *
@@ -1953,7 +1952,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
 }
 
 /**
- * lpfc_scsi_prep_cmnd:  Routine to convert scsi cmnd to FCP information unit.
+ * lpfc_scsi_prep_cmnd -  Routine to convert scsi cmnd to FCP information unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
  * @pnode: Pointer to lpfc_nodelist.
@@ -2047,7 +2046,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 }
 
 /**
- * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @lun: Logical unit number.
@@ -2110,7 +2109,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 }
 
 /**
- * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
  * @phba: The Hba for which this call is being executed.
  * @cmdiocbq: Pointer to lpfc_iocbq data structure.
  * @rspiocbq: Pointer to lpfc_iocbq data structure.
@@ -2131,7 +2130,7 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_scsi_tgt_reset: Target reset handler.
+ * lpfc_scsi_tgt_reset - Target reset handler
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
  * @vport: The virtual port for which this call is being executed.
  * @tgt_id: Target ID.
@@ -2198,7 +2197,7 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_info: Info entry point of scsi_host_template data structure.
+ * lpfc_info - Info entry point of scsi_host_template data structure
  * @host: The scsi host for which this call is being executed.
  *
  * This routine provides module information about hba.
@@ -2236,7 +2235,7 @@ lpfc_info(struct Scsi_Host *host)
 }
 
 /**
- * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
  * @phba: The Hba for which this call is being executed.
  *
  * This routine modifies fcp_poll_timer  field of @phba by cfg_poll_tmo.
@@ -2253,7 +2252,7 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
  * @phba: The Hba for which this call is being executed.
  *
  * This routine starts the fcp_poll_timer of @phba.
@@ -2264,7 +2263,7 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_poll_timeout: Restart polling timer.
+ * lpfc_poll_timeout - Restart polling timer
  * @ptr: Map to lpfc_hba data structure pointer.
  *
  * This routine restarts fcp_poll timer, when FCP ring  polling is enable
@@ -2283,8 +2282,7 @@ void lpfc_poll_timeout(unsigned long ptr)
 }
 
 /**
- * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
- * structure.
+ * lpfc_queuecommand - scsi_host_template queuecommand entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
  * @done: Pointer to done routine.
  *
@@ -2450,7 +2448,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 }
 
 /**
- * lpfc_block_error_handler: Routine to block error  handler.
+ * lpfc_block_error_handler - Routine to block error  handler
  * @cmnd: Pointer to scsi_cmnd data structure.
  *
  *  This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
@@ -2472,8 +2470,7 @@ lpfc_block_error_handler(struct scsi_cmnd *cmnd)
 }
 
 /**
- * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
- *structure.
+ * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine aborts @cmnd pending in base driver.
@@ -2578,8 +2575,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 }
 
 /**
- * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
- *data structure.
+ * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine does a device reset by sending a TARGET_RESET task management
@@ -2587,7 +2583,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
  *
  * Return code :
  *  0x2003 - Error
- *  0ex2002 - Success
+ *  0x2002 - Success
  **/
 static int
 lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
@@ -2707,8 +2703,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 }
 
 /**
- * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
- * Template data structure.
+ * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine does target reset to all target on @cmnd->device->host.
@@ -2808,8 +2803,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 }
 
 /**
- * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
- * structure.
+ * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
  * @sdev: Pointer to scsi_device.
  *
  * This routine populates the cmds_per_lun count + 2 scsi_bufs into  this host's
@@ -2883,8 +2877,7 @@ lpfc_slave_alloc(struct scsi_device *sdev)
 }
 
 /**
- * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
- *  structure.
+ * lpfc_slave_configure - scsi_host_template slave_configure entry point
  * @sdev: Pointer to scsi_device.
  *
  * This routine configures following items
@@ -2925,7 +2918,7 @@ lpfc_slave_configure(struct scsi_device *sdev)
 }
 
 /**
- * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
  * @sdev: Pointer to scsi_device.
  *
  * This routine sets @sdev hostatdata filed to null.
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a36a120561e..74cfa963dfc 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -68,7 +68,7 @@ typedef enum _lpfc_iocb_type {
 } lpfc_iocb_type;
 
 /**
- * lpfc_cmd_iocb: Get next command iocb entry in the ring.
+ * lpfc_cmd_iocb - Get next command iocb entry in the ring
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -85,7 +85,7 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_resp_iocb: Get next response iocb entry in the ring.
+ * lpfc_resp_iocb - Get next response iocb entry in the ring
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -102,7 +102,7 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
  * @phba: Pointer to HBA context object.
  *
  * This function is called with hbalock held. This function
@@ -121,7 +121,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
  * @phba: Pointer to HBA context object.
  *
  * This function is called with no lock held. This function
@@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
 }
 
 /**
- * __lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
  *
@@ -164,7 +164,7 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 }
 
 /**
- * lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * lpfc_sli_release_iocbq - Release iocb to the iocb pool
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
  *
@@ -185,8 +185,8 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 }
 
 /**
- * lpfc_sli_iocb_cmd_type: Get the iocb type.
- * @iocb_cmnd : iocb command code.
+ * lpfc_sli_iocb_cmd_type - Get the iocb type
+ * @iocb_cmnd: iocb command code.
  *
  * This function is called by ring event handler function to get the iocb type.
  * This function translates the iocb command to an iocb command type used to
@@ -295,7 +295,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
 }
 
 /**
- * lpfc_sli_ring_map: Issue config_ring mbox for all rings.
+ * lpfc_sli_ring_map - Issue config_ring mbox for all rings
  * @phba: Pointer to HBA context object.
  *
  * This function is called from SLI initialization code
@@ -338,7 +338,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq.
+ * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @piocb: Pointer to the driver iocb object.
@@ -370,7 +370,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_ringtx_get: Get first element of the txq.
+ * lpfc_sli_ringtx_get - Get first element of the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -391,7 +391,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring.
+ * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -445,7 +445,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_sli_next_iotag: Get an iotag for the iocb.
+ * lpfc_sli_next_iotag - Get an iotag for the iocb
  * @phba: Pointer to HBA context object.
  * @iocbq: Pointer to driver iocb object.
  *
@@ -520,7 +520,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 }
 
 /**
- * lpfc_sli_submit_iocb: Submit an iocb to the firmware.
+ * lpfc_sli_submit_iocb - Submit an iocb to the firmware
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @iocb: Pointer to iocb slot in the ring.
@@ -577,7 +577,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_update_full_ring: Update the chip attention register.
+ * lpfc_sli_update_full_ring - Update the chip attention register
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -608,7 +608,7 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_sli_update_ring: Update chip attention register.
+ * lpfc_sli_update_ring - Update chip attention register
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -632,7 +632,7 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_sli_resume_iocb: Process iocbs in the txq.
+ * lpfc_sli_resume_iocb - Process iocbs in the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -672,7 +672,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ.
+ * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ
  * @phba: Pointer to HBA context object.
  * @hbqno: HBQ number.
  *
@@ -717,7 +717,7 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno)
 }
 
 /**
- * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers.
+ * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers
  * @phba: Pointer to HBA context object.
  *
  * This function is called with no lock held to free all the
@@ -771,7 +771,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware.
+ * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware
  * @phba: Pointer to HBA context object.
  * @hbqno: HBQ number.
  * @hbq_buf: Pointer to HBQ buffer.
@@ -841,7 +841,7 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = {
 };
 
 /**
- * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ.
+ * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ
  * @phba: Pointer to HBA context object.
  * @hbqno: HBQ number.
  * @count: Number of HBQ buffers to be posted.
@@ -901,7 +901,7 @@ err:
 }
 
 /**
- * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware.
+ * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware
  * @phba: Pointer to HBA context object.
  * @qno: HBQ number.
  *
@@ -917,7 +917,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
 }
 
 /**
- * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ.
+ * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ
  * @phba: Pointer to HBA context object.
  * @qno:  HBQ queue number.
  *
@@ -933,7 +933,7 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
 }
 
 /**
- * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag.
+ * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
  * @phba: Pointer to HBA context object.
  * @tag: Tag of the hbq buffer.
  *
@@ -966,7 +966,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
 }
 
 /**
- * lpfc_sli_free_hbq: Give back the hbq buffer to firmware.
+ * lpfc_sli_free_hbq - Give back the hbq buffer to firmware
  * @phba: Pointer to HBA context object.
  * @hbq_buffer: Pointer to HBQ buffer.
  *
@@ -988,7 +988,7 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
 }
 
 /**
- * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox.
+ * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox
  * @mbxCommand: mailbox command code.
  *
  * This function is called by the mailbox event handler function to verify
@@ -1064,8 +1064,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 }
 
 /**
- * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from
- *          lpfc_sli_issue_mbox_wait.
+ * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler
  * @phba: Pointer to HBA context object.
  * @pmboxq: Pointer to mailbox command.
  *
@@ -1096,7 +1095,7 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 
 
 /**
- * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler.
+ * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler
  * @phba: Pointer to HBA context object.
  * @pmb: Pointer to mailbox object.
  *
@@ -1140,7 +1139,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware.
+ * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware
  * @phba: Pointer to HBA context object.
  *
  * This function is called with no lock held. This function processes all
@@ -1260,7 +1259,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_get_buff: Get the buffer associated with the buffer tag.
+ * lpfc_sli_get_buff - Get the buffer associated with the buffer tag
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @tag: buffer tag.
@@ -1288,7 +1287,7 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
 
 
 /**
- * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler.
+ * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @saveq: Pointer to the unsolicited iocb.
@@ -1484,7 +1483,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb.
+ * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @prspiocb: Pointer to response iocb object.
@@ -1521,7 +1520,7 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_process_sol_iocb: process solicited iocb completion.
+ * lpfc_sli_process_sol_iocb - process solicited iocb completion
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @saveq: Pointer to the response iocb to be processed.
@@ -1614,7 +1613,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_rsp_pointers_error: Response ring pointer error handler.
+ * lpfc_sli_rsp_pointers_error - Response ring pointer error handler
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -1652,7 +1651,7 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_poll_eratt: Error attention polling timer timeout handler.
+ * lpfc_poll_eratt - Error attention polling timer timeout handler
  * @ptr: Pointer to address of HBA context object.
  *
  * This function is invoked by the Error Attention polling timer when the
@@ -1682,7 +1681,7 @@ void lpfc_poll_eratt(unsigned long ptr)
 }
 
 /**
- * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode.
+ * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode
  * @phba: Pointer to HBA context object.
  *
  * This function is called from lpfc_queuecommand, lpfc_poll_timeout,
@@ -1845,7 +1844,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring.
+ * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @mask: Host attention register mask for this ring.
@@ -2037,7 +2036,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings.
+ * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @mask: Host attention register mask for this ring.
@@ -2311,7 +2310,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring.
+ * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  *
@@ -2360,7 +2359,7 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 }
 
 /**
- * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring.
+ * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
  * @phba: Pointer to HBA context object.
  *
  * This function flushes all iocbs in the fcp ring and frees all the iocb
@@ -2424,7 +2423,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdready: Check for host status bits.
+ * lpfc_sli_brdready - Check for host status bits
  * @phba: Pointer to HBA context object.
  * @mask: Bit mask to be checked.
  *
@@ -2484,7 +2483,7 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
 #define BARRIER_TEST_PATTERN (0xdeadbeef)
 
 /**
- * lpfc_reset_barrier: Make HBA ready for HBA reset.
+ * lpfc_reset_barrier - Make HBA ready for HBA reset
  * @phba: Pointer to HBA context object.
  *
  * This function is called before resetting an HBA. This
@@ -2564,7 +2563,7 @@ restore_hc:
 }
 
 /**
- * lpfc_sli_brdkill: Issue a kill_board mailbox command.
+ * lpfc_sli_brdkill - Issue a kill_board mailbox command
  * @phba: Pointer to HBA context object.
  *
  * This function issues a kill_board mailbox command and waits for
@@ -2651,7 +2650,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdreset: Reset the HBA.
+ * lpfc_sli_brdreset - Reset the HBA
  * @phba: Pointer to HBA context object.
  *
  * This function resets the HBA by writing HC_INITFF to the control
@@ -2714,7 +2713,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_brdrestart: Restart the HBA.
+ * lpfc_sli_brdrestart - Restart the HBA
  * @phba: Pointer to HBA context object.
  *
  * This function is called in the SLI initialization code path to
@@ -2781,7 +2780,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart.
+ * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
  * @phba: Pointer to HBA context object.
  *
  * This function is called after a HBA restart to wait for successful
@@ -2876,7 +2875,7 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_hbq_count: Get the number of HBQs to be configured.
+ * lpfc_sli_hbq_count - Get the number of HBQs to be configured
  *
  * This function calculates and returns the number of HBQs required to be
  * configured.
@@ -2888,7 +2887,7 @@ lpfc_sli_hbq_count(void)
 }
 
 /**
- * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries.
+ * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries
  *
  * This function adds the number of hbq entries in every HBQ to get
  * the total number of hbq entries required for the HBA and returns
@@ -2907,7 +2906,7 @@ lpfc_sli_hbq_entry_count(void)
 }
 
 /**
- * lpfc_sli_hbq_size: Calculate memory required for all hbq entries.
+ * lpfc_sli_hbq_size - Calculate memory required for all hbq entries
  *
  * This function calculates amount of memory required for all hbq entries
  * to be configured and returns the total memory required.
@@ -2919,7 +2918,7 @@ lpfc_sli_hbq_size(void)
 }
 
 /**
- * lpfc_sli_hbq_setup: configure and initialize HBQs.
+ * lpfc_sli_hbq_setup - configure and initialize HBQs
  * @phba: Pointer to HBA context object.
  *
  * This function is called during the SLI initialization to configure
@@ -2988,7 +2987,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_config_port: Issue config port mailbox command.
+ * lpfc_sli_config_port - Issue config port mailbox command
  * @phba: Pointer to HBA context object.
  * @sli_mode: sli mode - 2/3
  *
@@ -3114,7 +3113,7 @@ do_prep_failed:
 
 
 /**
- * lpfc_sli_hba_setup: SLI intialization function.
+ * lpfc_sli_hba_setup - SLI intialization function
  * @phba: Pointer to HBA context object.
  *
  * This function is the main SLI intialization function. This function
@@ -3206,7 +3205,7 @@ lpfc_sli_hba_setup_error:
 
 
 /**
- * lpfc_mbox_timeout: Timeout call back function for mbox timer.
+ * lpfc_mbox_timeout - Timeout call back function for mbox timer
  * @ptr: context object - pointer to hba structure.
  *
  * This is the callback function for mailbox timer. The mailbox
@@ -3237,7 +3236,7 @@ lpfc_mbox_timeout(unsigned long ptr)
 
 
 /**
- * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout.
+ * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout
  * @phba: Pointer to HBA context object.
  *
  * This function is called from worker thread when a mailbox command times out.
@@ -3295,7 +3294,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_issue_mbox: Issue a mailbox command to firmware.
+ * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
  * @phba: Pointer to HBA context object.
  * @pmbox: Pointer to mailbox object.
  * @flag: Flag indicating how the mailbox need to be processed.
@@ -3632,7 +3631,7 @@ out_not_finished:
 }
 
 /**
- * __lpfc_sli_ringtx_put: Add an iocb to the txq.
+ * __lpfc_sli_ringtx_put - Add an iocb to the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @piocb: Pointer to address of newly added command iocb.
@@ -3651,7 +3650,7 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_next_iocb: Get the next iocb in the txq.
+ * lpfc_sli_next_iocb - Get the next iocb in the txq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @piocb: Pointer to address of newly added command iocb.
@@ -3683,7 +3682,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb.
+ * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @piocb: Pointer to command iocb.
@@ -3813,7 +3812,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 
 
 /**
- * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb.
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @piocb: Pointer to command iocb.
@@ -3840,7 +3839,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_extra_ring_setup: Extra ring setup function.
+ * lpfc_extra_ring_setup - Extra ring setup function
  * @phba: Pointer to HBA context object.
  *
  * This function is called while driver attaches with the
@@ -3886,7 +3885,7 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_async_event_handler: ASYNC iocb handler function.
+ * lpfc_sli_async_event_handler - ASYNC iocb handler function
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @iocbq: Pointer to iocb object.
@@ -3954,7 +3953,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,
 
 
 /**
- * lpfc_sli_setup: SLI ring setup function.
+ * lpfc_sli_setup - SLI ring setup function
  * @phba: Pointer to HBA context object.
  *
  * lpfc_sli_setup sets up rings of the SLI interface with
@@ -4076,7 +4075,7 @@ lpfc_sli_setup(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_queue_setup: Queue initialization function.
+ * lpfc_sli_queue_setup - Queue initialization function
  * @phba: Pointer to HBA context object.
  *
  * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each
@@ -4115,7 +4114,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_host_down: Vport cleanup function.
+ * lpfc_sli_host_down - Vport cleanup function
  * @vport: Pointer to virtual port object.
  *
  * lpfc_sli_host_down is called to clean up the resources
@@ -4194,7 +4193,7 @@ lpfc_sli_host_down(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_sli_hba_down: Resource cleanup function for the HBA.
+ * lpfc_sli_hba_down - Resource cleanup function for the HBA
  * @phba: Pointer to HBA context object.
  *
  * This function cleans up all iocb, buffers, mailbox commands
@@ -4299,7 +4298,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_pcimem_bcopy: SLI memory copy function.
+ * lpfc_sli_pcimem_bcopy - SLI memory copy function
  * @srcp: Source memory pointer.
  * @destp: Destination memory pointer.
  * @cnt: Number of words required to be copied.
@@ -4329,7 +4328,7 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
 
 
 /**
- * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq.
+ * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @mp: Pointer to driver buffer object.
@@ -4352,8 +4351,7 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted
- *          using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer
  * @phba: Pointer to HBA context object.
  *
  * When HBQ is enabled, buffers are searched based on tags. This function
@@ -4378,8 +4376,7 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with
- *              posted using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @tag: Buffer tag.
@@ -4422,8 +4419,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for
- *      unsolicited ct and els events.
+ * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @phys: DMA address of the buffer.
@@ -4466,7 +4462,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs.
+ * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs
  * @phba: Pointer to HBA context object.
  * @cmdiocb: Pointer to driver command iocb object.
  * @rspiocb: Pointer to driver response iocb object.
@@ -4542,7 +4538,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command.
+ * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command
  * @phba: Pointer to HBA context object.
  * @cmdiocb: Pointer to driver command iocb object.
  * @rspiocb: Pointer to driver response iocb object.
@@ -4572,7 +4568,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_sli_issue_abort_iotag: Abort function for a command iocb.
+ * lpfc_sli_issue_abort_iotag - Abort function for a command iocb
  * @phba: Pointer to HBA context object.
  * @pring: Pointer to driver SLI ring object.
  * @cmdiocb: Pointer to driver command iocb object.
@@ -4658,15 +4654,14 @@ abort_iotag_exit:
 }
 
 /**
- * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands
- *                    associated with a vport/SCSI target/lun.
+ * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN
  * @iocbq: Pointer to driver iocb object.
  * @vport: Pointer to driver virtual port object.
  * @tgt_id: SCSI ID of the target.
  * @lun_id: LUN ID of the scsi device.
  * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST
  *
- * This function acts as iocb filter for functions which abort or count
+ * This function acts as an iocb filter for functions which abort or count
  * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return
  * 0 if the filtering criteria is met for the given iocb and will return
  * 1 if the filtering criteria is not met.
@@ -4724,7 +4719,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending.
+ * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending
  * @vport: Pointer to virtual port.
  * @tgt_id: SCSI ID of the target.
  * @lun_id: LUN ID of the scsi device.
@@ -4762,8 +4757,7 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id,
 }
 
 /**
- * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted
- *       FCP iocb.
+ * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs
  * @phba: Pointer to HBA context object
  * @cmdiocb: Pointer to command iocb object.
  * @rspiocb: Pointer to response iocb object.
@@ -4781,8 +4775,7 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 }
 
 /**
- * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands
- *          pending on a SCSI host(vport)/target/lun.
+ * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN
  * @vport: Pointer to virtual port.
  * @pring: Pointer to driver SLI ring object.
  * @tgt_id: SCSI ID of the target.
@@ -4854,8 +4847,7 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
 }
 
 /**
- * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using
- *                          lpfc_sli_issue_iocb_wait.
+ * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
  * @phba: Pointer to HBA context object.
  * @cmdiocbq: Pointer to command iocb.
  * @rspiocbq: Pointer to response iocb.
@@ -4893,7 +4885,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands.
+ * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
  * @phba: Pointer to HBA context object..
  * @pring: Pointer to sli ring.
  * @piocb: Pointer to command iocb.
@@ -5000,7 +4992,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox.
+ * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox
  * @phba: Pointer to HBA context object.
  * @pmboxq: Pointer to driver mailbox object.
  * @timeout: Timeout in number of seconds.
@@ -5070,7 +5062,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
 }
 
 /**
- * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function.
+ * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
  * @phba: Pointer to HBA context.
  *
  * This function is called to cleanup any pending mailbox
@@ -5113,7 +5105,7 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_sli_check_eratt: check error attention events
+ * lpfc_sli_check_eratt - check error attention events
  * @phba: Pointer to HBA context.
  *
  * This function is called form timer soft interrupt context to check HBA's
@@ -5162,7 +5154,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver.
+ * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
@@ -5423,7 +5415,7 @@ send_current_mbox:
 } /* lpfc_sp_intr_handler */
 
 /**
- * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver.
+ * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
@@ -5510,7 +5502,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 }  /* lpfc_fp_intr_handler */
 
 /**
- * lpfc_intr_handler: The device-level interrupt handler of lpfc driver.
+ * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
  * @irq: Interrupt number.
  * @dev_id: The device context pointer.
  *
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 63b54c66756..917ad56b0af 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -206,7 +206,7 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
 }
 
 /**
- * lpfc_discovery_wait: Wait for driver discovery to quiesce.
+ * lpfc_discovery_wait - Wait for driver discovery to quiesce
  * @vport: The virtual port for which this call is being executed.
  *
  * This driver calls this routine specifically from lpfc_vport_delete
@@ -741,7 +741,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
 
 
 /**
- * lpfc_vport_reset_stat_data: Reset the statistical data for the vport.
+ * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
  * @vport: Pointer to vport object.
  *
  * This function resets the statistical data for the vport. This function
@@ -763,8 +763,7 @@ lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
 
 
 /**
- * lpfc_alloc_bucket: Allocate data buffer required for collecting
- *  statistical data.
+ * lpfc_alloc_bucket - Allocate data buffer required for statistical data
  * @vport: Pointer to vport object.
  *
  * This function allocates data buffer required for all the FC
@@ -797,8 +796,7 @@ lpfc_alloc_bucket(struct lpfc_vport *vport)
 }
 
 /**
- * lpfc_free_bucket: Free data buffer required for collecting
- *  statistical data.
+ * lpfc_free_bucket - Free data buffer required for statistical data
  * @vport: Pointer to vport object.
  *
  * Th function frees statistical data buffer of all the FC
-- 
GitLab


From a257bf905efd22fd2c055580b0ab2e8e7ed1b6a1 Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Mon, 6 Apr 2009 18:48:10 -0400
Subject: [PATCH 0877/1421] [SCSI] lpfc 8.3.1: misc fixes/changes

8.3.1 Fixes/Changes :

- Fix incorrect byte-swapping on word 4 of IOCB (data length) which
  caused LUNs to not be discovered on big-endian (e.g. PPC)

- Remove a bad cast of MBslimaddr which loses the __iomem (sparse)

- Make lpfc_debugfs_mask_disc_trc static (sparse)

- Correct misspelled word BlockGuard in lpfc_logmsg.h comment

- Replaced repeated code segment for canceling IOCBs from a list with
  a function call, lpfc_sli_cancel_iocbs().

- Increased HBQ buffers to support 40KB SSC sequences.

- Added sysfs interface to update speed and topology parameter without
  link bounce.

- Fixed bug with sysfs fc_host WWNs not being updated after changing
  the WWNs.

- Check if the active mailbox is NULL in the beginning of the mailbox
  timeout handler - fixes panic in the mailbox timeout handler while
  running IO stress test

- Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect
  reference to phba through vport

- Removed de-reference of scsi device after call to scsi_done() to fix
  panic in scsi completion path while accessing scsi device after
  scsi_done is called.

- Fixed "Nodelist not empty" message when unloading the driver after
  target reboot test

- Added LP2105 HBA model description

- Added code to print all 16 words of unrecognized ASYNC events

- Fixed memory leak in vport create + delete loop

- Added support for handling dual error bit from HBA

- Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb

- Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node

- Take NULL termintator into account when calculating available buffer space

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/lpfc/lpfc.h           |   2 +-
 drivers/scsi/lpfc/lpfc_attr.c      |  67 +++++++--
 drivers/scsi/lpfc/lpfc_crtn.h      |   2 +
 drivers/scsi/lpfc/lpfc_debugfs.c   |   5 +-
 drivers/scsi/lpfc/lpfc_disc.h      |   1 +
 drivers/scsi/lpfc/lpfc_els.c       |  75 +++-------
 drivers/scsi/lpfc/lpfc_hbadisc.c   |  80 +++++------
 drivers/scsi/lpfc/lpfc_init.c      | 104 +++++++++++---
 drivers/scsi/lpfc/lpfc_logmsg.h    |   2 +-
 drivers/scsi/lpfc/lpfc_nportdisc.c |  18 +--
 drivers/scsi/lpfc/lpfc_scsi.c      |  47 +++---
 drivers/scsi/lpfc/lpfc_sli.c       | 221 +++++++++++++++++++----------
 12 files changed, 378 insertions(+), 246 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index dcba267db71..1105f9a111b 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -443,6 +443,7 @@ struct lpfc_hba {
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
 
+#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
 
 	return;
 }
-
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 69296cd6e9d..c14f0cbdb12 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
  * non-zero return value from lpfc_issue_lip()
  * -EINVAL val out of range
  **/
-static int
-lpfc_topology_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_topology_store(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
 {
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	int val = 0;
+	int nolip = 0;
+	const char *val_buf = buf;
 	int err;
 	uint32_t prev_val;
+
+	if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+		nolip = 1;
+		val_buf = &buf[strlen("nolip ")];
+	}
+
+	if (!isdigit(val_buf[0]))
+		return -EINVAL;
+	if (sscanf(val_buf, "%i", &val) != 1)
+		return -EINVAL;
+
 	if (val >= 0 && val <= 6) {
 		prev_val = phba->cfg_topology;
 		phba->cfg_topology = val;
+		if (nolip)
+			return strlen(buf);
+
 		err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
-		if (err)
+		if (err) {
 			phba->cfg_topology = prev_val;
-		return err;
+			return -EINVAL;
+		} else
+			return strlen(buf);
 	}
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 		"%d:0467 lpfc_topology attribute cannot be set to %d, "
@@ -2240,7 +2263,6 @@ module_param(lpfc_topology, int, 0);
 MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
 lpfc_param_show(topology)
 lpfc_param_init(topology, 0, 0, 6)
-lpfc_param_store(topology)
 static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
 		lpfc_topology_show, lpfc_topology_store);
 
@@ -2281,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 	unsigned long base, step, bucket_type;
 
 	if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
-		if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN)
+		if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
 			return -EINVAL;
 
 		strcpy(bucket_data, buf);
@@ -2598,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
  * non-zero return value from lpfc_issue_lip()
  * -EINVAL val out of range
  **/
-static int
-lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
 {
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	int val = 0;
+	int nolip = 0;
+	const char *val_buf = buf;
 	int err;
 	uint32_t prev_val;
 
+	if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+		nolip = 1;
+		val_buf = &buf[strlen("nolip ")];
+	}
+
+	if (!isdigit(val_buf[0]))
+		return -EINVAL;
+	if (sscanf(val_buf, "%i", &val) != 1)
+		return -EINVAL;
+
 	if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
 		((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
 		((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
@@ -2611,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phba, int val)
 		((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
 		return -EINVAL;
 
-	if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+	if ((val >= 0 && val <= 8)
 		&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
 		prev_val = phba->cfg_link_speed;
 		phba->cfg_link_speed = val;
+		if (nolip)
+			return strlen(buf);
+
 		err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
-		if (err)
+		if (err) {
 			phba->cfg_link_speed = prev_val;
-		return err;
+			return -EINVAL;
+		} else
+			return strlen(buf);
 	}
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2665,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val)
 	return -EINVAL;
 }
 
-lpfc_param_store(link_speed)
 static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
 		lpfc_link_speed_show, lpfc_link_speed_store);
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 07f4976319a..f88ce3f2619 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *);
 struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
 void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
+void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
+			   uint32_t);
 
 void lpfc_reset_barrier(struct lpfc_hba * phba);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index abb870e595b..52be5644e07 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_trc, int, 0);
 MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
 	"Set debugfs slow ring trace depth");
 
-int lpfc_debugfs_mask_disc_trc;
+static int lpfc_debugfs_mask_disc_trc;
 module_param(lpfc_debugfs_mask_disc_trc, int, 0);
 MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
 	"Set debugfs discovery trace mask");
@@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size)
 
 	len +=  snprintf(buf+len, size-len, "HBA SLIM\n");
 	lpfc_memcpy_from_slim(buffer,
-		((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off,
-		1024);
+		phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);
 
 	ptr = (uint32_t *)&buffer[0];
 	off = lpfc_debugfs_last_hba_slim_off;
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index f29e548a90d..ffd10897207 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -99,6 +99,7 @@ struct lpfc_nodelist {
 #define NLP_USG_FREE_ACK_BIT	0x8	/* Indicate ndlp memory free invoked */
 
 	struct timer_list   nlp_delayfunc;	/* Used for delayed ELS cmds */
+	struct lpfc_hba *phba;
 	struct fc_rport *rport;			/* Corresponding FC transport
 						   port structure */
 	struct lpfc_vport *vport;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index d32c98bcf0c..b8b34cf5c3d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5058,19 +5058,9 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 	}
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		piocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		cmd = &piocb->iocb;
-		list_del_init(&piocb->list);
-
-		if (!piocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, piocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(piocb->iocb_cmpl) (phba, piocb, piocb);
-		}
-	}
+	/* Cancell all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 
 	return;
 }
@@ -5121,18 +5111,11 @@ lpfc_els_flush_all_cmd(struct lpfc_hba  *phba)
 		lpfc_sli_issue_abort_iotag(phba, pring, piocb);
 	}
 	spin_unlock_irq(&phba->hbalock);
-	while (!list_empty(&completions)) {
-		piocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		cmd = &piocb->iocb;
-		list_del_init(&piocb->list);
-		if (!piocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, piocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(piocb->iocb_cmpl) (phba, piocb, piocb);
-		}
-	}
+
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
+
 	return;
 }
 
@@ -6468,7 +6451,6 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
 	LIST_HEAD(completions);
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_iocbq *tmp_iocb, *piocb;
-	IOCB_t *cmd;
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
@@ -6481,15 +6463,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
 	}
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		piocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		list_del_init(&piocb->list);
-
-		cmd = &piocb->iocb;
-		cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-		cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-		(piocb->iocb_cmpl) (phba, piocb, piocb);
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 }
 
 /**
@@ -6506,10 +6482,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
 void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
 {
 	LIST_HEAD(completions);
-	struct lpfc_hba  *phba = ndlp->vport->phba;
+	struct lpfc_hba  *phba = ndlp->phba;
 	struct lpfc_iocbq *tmp_iocb, *piocb;
 	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
-	IOCB_t *cmd;
 
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
@@ -6521,15 +6496,9 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
 	}
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		piocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		list_del_init(&piocb->list);
-
-		cmd = &piocb->iocb;
-		cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-		cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-		(piocb->iocb_cmpl) (phba, piocb, piocb);
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 }
 
 /**
@@ -6546,20 +6515,12 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
 void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
 {
 	LIST_HEAD(completions);
-	struct lpfc_iocbq *piocb;
-	IOCB_t *cmd;
 
 	spin_lock_irq(&phba->hbalock);
 	list_splice_init(&phba->fabric_iocb_list, &completions);
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		piocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		list_del_init(&piocb->list);
-
-		cmd = &piocb->iocb;
-		cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-		cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-		(piocb->iocb_cmpl) (phba, piocb, piocb);
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 }
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 9373a9e7485..e764ce0bf70 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -78,7 +78,7 @@ lpfc_terminate_rport_io(struct fc_rport *rport)
 		return;
 	}
 
-	phba  = ndlp->vport->phba;
+	phba  = ndlp->phba;
 
 	lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
 		"rport terminate: sid:x%x did:x%x flg:x%x",
@@ -1862,9 +1862,14 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
  * @vport: Pointer to Virtual Port object.
  * @ndlp: Pointer to FC node object.
  * @did: FC_ID of the node.
- *	This function is always called when node object need to
- * be initialized. It initializes all the fields of the node
- * object.
+ *
+ * This function is always called when node object need to be initialized.
+ * It initializes all the fields of the node object. Although the reference
+ * to phba from @ndlp can be obtained indirectly through it's reference to
+ * @vport, a direct reference to phba is taken here by @ndlp. This is due
+ * to the life-span of the @ndlp might go beyond the existence of @vport as
+ * the final release of ndlp is determined by its reference count. And, the
+ * operation on @ndlp needs the reference to phba.
  **/
 static inline void
 lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
@@ -1877,6 +1882,7 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
 	ndlp->nlp_DID = did;
 	ndlp->vport = vport;
+	ndlp->phba = vport->phba;
 	ndlp->nlp_sid = NLP_NO_SID;
 	kref_init(&ndlp->kref);
 	NLP_INT_NODE_ACT(ndlp);
@@ -2086,7 +2092,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	struct lpfc_sli *psli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_iocbq *iocb, *next_iocb;
-	IOCB_t *icmd;
 	uint32_t rpi, i;
 
 	lpfc_fabric_abort_nport(ndlp);
@@ -2122,19 +2127,9 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 		}
 	}
 
-	while (!list_empty(&completions)) {
-		iocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			icmd = &iocb->iocb;
-			icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(iocb->iocb_cmpl)(phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 
 	return 0;
 }
@@ -2186,9 +2181,13 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport)
 		mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		mbox->context1 = NULL;
 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
-		if (rc == MBX_NOT_FINISHED) {
+		if (rc != MBX_TIMEOUT)
 			mempool_free(mbox, phba->mbox_mem_pool);
-		}
+
+		if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
+				"1836 Could not issue "
+				"unreg_login(all_rpis) status %d\n", rc);
 	}
 }
 
@@ -2206,12 +2205,14 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport)
 		mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		mbox->context1 = NULL;
 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
-		if (rc == MBX_NOT_FINISHED) {
+		if (rc != MBX_TIMEOUT)
+			mempool_free(mbox, phba->mbox_mem_pool);
+
+		if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
 					 "1815 Could not issue "
-					 "unreg_did (default rpis)\n");
-			mempool_free(mbox, phba->mbox_mem_pool);
-		}
+					 "unreg_did (default rpis) status %d\n",
+					 rc);
 	}
 }
 
@@ -2470,14 +2471,13 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
 			if (ndlp->nlp_flag & NLP_RCV_PLOGI)
 				return NULL;
 
-			spin_lock_irq(shost->host_lock);
-			ndlp->nlp_flag |= NLP_NPR_2B_DISC;
-			spin_unlock_irq(shost->host_lock);
-
 			/* Since this node is marked for discovery,
 			 * delay timeout is not needed.
 			 */
 			lpfc_cancel_retry_delay_tmo(vport, ndlp);
+			spin_lock_irq(shost->host_lock);
+			ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+			spin_unlock_irq(shost->host_lock);
 		} else
 			ndlp = NULL;
 	} else {
@@ -2740,19 +2740,9 @@ lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	}
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		iocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			icmd = &iocb->iocb;
-			icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 }
 
 static void
@@ -3173,7 +3163,7 @@ lpfc_nlp_release(struct kref *kref)
 	lpfc_nlp_remove(ndlp->vport, ndlp);
 
 	/* clear the ndlp active flag for all release cases */
-	phba = ndlp->vport->phba;
+	phba = ndlp->phba;
 	spin_lock_irqsave(&phba->ndlp_lock, flags);
 	NLP_CLR_NODE_ACT(ndlp);
 	spin_unlock_irqrestore(&phba->ndlp_lock, flags);
@@ -3181,7 +3171,7 @@ lpfc_nlp_release(struct kref *kref)
 	/* free ndlp memory for final ndlp release */
 	if (NLP_CHK_FREE_REQ(ndlp)) {
 		kfree(ndlp->lat_data);
-		mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool);
+		mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
 	}
 }
 
@@ -3204,7 +3194,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
 		 * ndlp reference count that is in the process of being
 		 * released.
 		 */
-		phba = ndlp->vport->phba;
+		phba = ndlp->phba;
 		spin_lock_irqsave(&phba->ndlp_lock, flags);
 		if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
 			spin_unlock_irqrestore(&phba->ndlp_lock, flags);
@@ -3240,7 +3230,7 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp)
 	"node put:        did:x%x flg:x%x refcnt:x%x",
 		ndlp->nlp_DID, ndlp->nlp_flag,
 		atomic_read(&ndlp->kref.refcount));
-	phba = ndlp->vport->phba;
+	phba = ndlp->phba;
 	spin_lock_irqsave(&phba->ndlp_lock, flags);
 	/* Check the ndlp memory free acknowledge flag to avoid the
 	 * possible race condition that kref_put got invoked again
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e3645e8f348..86d1bdcbf2d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -302,6 +302,7 @@ int
 lpfc_config_port_post(struct lpfc_hba *phba)
 {
 	struct lpfc_vport *vport = phba->pport;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	LPFC_MBOXQ_t *pmb;
 	MAILBOX_t *mb;
 	struct lpfc_dmabuf *mp;
@@ -359,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	       sizeof (struct lpfc_name));
 	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
 	       sizeof (struct lpfc_name));
+
+	/* Update the fc_host data structures with new wwn. */
+	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
 	/* If no serial number in VPD data, use low 6 bytes of WWNN */
 	/* This should be consolidated into parse_vpd ? - mr */
 	if (phba->SerialNumber[0] == 0) {
@@ -598,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_dmabuf *mp, *next_mp;
-	struct lpfc_iocbq *iocb;
-	IOCB_t *cmd = NULL;
 	LIST_HEAD(completions);
 	int i;
 
@@ -627,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
 		pring->txcmplq_cnt = 0;
 		spin_unlock_irq(&phba->hbalock);
 
-		while (!list_empty(&completions)) {
-			iocb = list_get_first(&completions, struct lpfc_iocbq,
-				list);
-			cmd = &iocb->iocb;
-			list_del_init(&iocb->list);
-
-			if (!iocb->iocb_cmpl)
-				lpfc_sli_release_iocbq(phba, iocb);
-			else {
-				cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-				cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-				(iocb->iocb_cmpl) (phba, iocb, iocb);
-			}
-		}
+		/* Cancel all the IOCBs from the completions list */
+		lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+				      IOERR_SLI_ABORTED);
 
 		lpfc_sli_abort_iocb_ring(phba, pring);
 		spin_lock_irq(&phba->hbalock);
@@ -855,6 +848,72 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 	return;
 }
 
+/**
+ * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the deferred HBA hardware error
+ * conditions. This type of error is indicated by HBA by setting ER1
+ * and another ER bit in the host status register. The driver will
+ * wait until the ER1 bit clears before handling the error condition.
+ **/
+static void
+lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
+{
+	uint32_t old_host_status = phba->work_hs;
+	struct lpfc_sli_ring  *pring;
+	struct lpfc_sli *psli = &phba->sli;
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+		"0479 Deferred Adapter Hardware Error "
+		"Data: x%x x%x x%x\n",
+		phba->work_hs,
+		phba->work_status[0], phba->work_status[1]);
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+
+
+	/*
+	 * Firmware stops when it triggred erratt. That could cause the I/Os
+	 * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
+	 * SCSI layer retry it after re-establishing link.
+	 */
+	pring = &psli->ring[psli->fcp_ring];
+	lpfc_sli_abort_iocb_ring(phba, pring);
+
+	/*
+	 * There was a firmware error. Take the hba offline and then
+	 * attempt to restart it.
+	 */
+	lpfc_offline_prep(phba);
+	lpfc_offline(phba);
+
+	/* Wait for the ER1 bit to clear.*/
+	while (phba->work_hs & HS_FFER1) {
+		msleep(100);
+		phba->work_hs = readl(phba->HSregaddr);
+		/* If driver is unloading let the worker thread continue */
+		if (phba->pport->load_flag & FC_UNLOADING) {
+			phba->work_hs = 0;
+			break;
+		}
+	}
+
+	/*
+	 * This is to ptrotect against a race condition in which
+	 * first write to the host attention register clear the
+	 * host status register.
+	 */
+	if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
+		phba->work_hs = old_host_status & ~HS_FFER1;
+
+	phba->hba_flag &= ~DEFER_ERATT;
+	phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+	phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+}
+
 /**
  * lpfc_handle_eratt - The HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
@@ -894,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 				  (char *) &board_event,
 				  LPFC_NL_VENDOR_ID);
 
+	if (phba->hba_flag & DEFER_ERATT)
+		lpfc_handle_deferred_eratt(phba);
+
 	if (phba->work_hs & HS_FFER6) {
 		/* Re-establishing Link */
 		lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
@@ -1321,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
 		break;
 	case PCI_DEVICE_ID_ZEPHYR_DCSP:
-		m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
+		m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+		GE = 1;
 		break;
 	case PCI_DEVICE_ID_ZMID:
 		m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
@@ -3032,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 
 	lpfc_free_sysfs_attr(vport);
 
-	kthread_stop(phba->worker_thread);
-
 	/* Release all the vports against this physical port */
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
@@ -3051,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 	 * clears the rings, discards all mailbox commands, and resets
 	 * the HBA.
 	 */
+
+	/* HBA interrupt will be diabled after this call */
 	lpfc_sli_hba_down(phba);
+	/* Stop kthread signal shall trigger work_done one more time */
+	kthread_stop(phba->worker_thread);
+	/* Final cleanup of txcmplq and reset the HBA */
 	lpfc_sli_brdrestart(phba);
 
 	lpfc_stop_phba_timers(phba);
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index a85b7c196bb..1aa85709b01 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -27,7 +27,7 @@
 #define LOG_FCP                       0x40	/* FCP traffic history */
 #define LOG_NODE                      0x80	/* Node table events */
 #define LOG_TEMP                      0x100	/* Temperature sensor events */
-#define LOG_BG			      0x200	/* BlockBuard events */
+#define LOG_BG			      0x200	/* BlockGuard events */
 #define LOG_MISC                      0x400	/* Miscellaneous events */
 #define LOG_SLI                       0x800	/* SLI events */
 #define LOG_FCP_ERROR                 0x1000	/* log errors, not underruns */
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 8f548adae9c..08cdc77af41 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	struct lpfc_sli  *psli = &phba->sli;
 	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	struct lpfc_iocbq *iocb, *next_iocb;
-	IOCB_t *cmd;
 
 	/* Abort outstanding I/O on NPort <nlp_DID> */
 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY,
@@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	}
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		iocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		cmd = &iocb->iocb;
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
+
 	lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
 	return 0;
 }
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 6eedb23980d..167b66dd34c 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -272,14 +272,14 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
  **/
 static inline void
 lpfc_rampup_queue_depth(struct lpfc_vport  *vport,
-			struct scsi_device *sdev)
+			uint32_t queue_depth)
 {
 	unsigned long flags;
 	struct lpfc_hba *phba = vport->phba;
 	uint32_t evt_posted;
 	atomic_inc(&phba->num_cmd_success);
 
-	if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
+	if (vport->cfg_lun_queue_depth <= queue_depth)
 		return;
 	spin_lock_irqsave(&phba->hbalock, flags);
 	if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
@@ -737,7 +737,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	 * Due to difference in data length between DIF/non-DIF paths,
 	 * we need to set word 4 of IOCB here
 	 */
-	iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
+	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
 	return 0;
 }
 
@@ -1693,10 +1693,12 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	struct lpfc_nodelist *pnode = rdata->pnode;
 	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
 	int result;
-	struct scsi_device *sdev, *tmp_sdev;
+	struct scsi_device *tmp_sdev;
 	int depth = 0;
 	unsigned long flags;
 	struct lpfc_fast_path_event *fast_path_evt;
+	struct Scsi_Host *shost = cmd->device->host;
+	uint32_t queue_depth, scsi_id;
 
 	lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
 	lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
@@ -1807,11 +1809,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 
 	lpfc_update_stats(phba, lpfc_cmd);
 	result = cmd->result;
-	sdev = cmd->device;
 	if (vport->cfg_max_scsicmpl_time &&
 	   time_after(jiffies, lpfc_cmd->start_time +
 		msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
-		spin_lock_irqsave(sdev->host->host_lock, flags);
+		spin_lock_irqsave(shost->host_lock, flags);
 		if (pnode && NLP_CHK_NODE_ACT(pnode)) {
 			if (pnode->cmd_qdepth >
 				atomic_read(&pnode->cmd_pending) &&
@@ -1824,22 +1825,26 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 
 			pnode->last_change_time = jiffies;
 		}
-		spin_unlock_irqrestore(sdev->host->host_lock, flags);
+		spin_unlock_irqrestore(shost->host_lock, flags);
 	} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
 		if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
 		   time_after(jiffies, pnode->last_change_time +
 			      msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
-			spin_lock_irqsave(sdev->host->host_lock, flags);
+			spin_lock_irqsave(shost->host_lock, flags);
 			pnode->cmd_qdepth += pnode->cmd_qdepth *
 				LPFC_TGTQ_RAMPUP_PCENT / 100;
 			if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
 				pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
 			pnode->last_change_time = jiffies;
-			spin_unlock_irqrestore(sdev->host->host_lock, flags);
+			spin_unlock_irqrestore(shost->host_lock, flags);
 		}
 	}
 
 	lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+
+	/* The sdev is not guaranteed to be valid post scsi_done upcall. */
+	queue_depth = cmd->device->queue_depth;
+	scsi_id = cmd->device->id;
 	cmd->scsi_done(cmd);
 
 	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
@@ -1847,28 +1852,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		 * If there is a thread waiting for command completion
 		 * wake up the thread.
 		 */
-		spin_lock_irqsave(sdev->host->host_lock, flags);
+		spin_lock_irqsave(shost->host_lock, flags);
 		lpfc_cmd->pCmd = NULL;
 		if (lpfc_cmd->waitq)
 			wake_up(lpfc_cmd->waitq);
-		spin_unlock_irqrestore(sdev->host->host_lock, flags);
+		spin_unlock_irqrestore(shost->host_lock, flags);
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return;
 	}
 
 
 	if (!result)
-		lpfc_rampup_queue_depth(vport, sdev);
+		lpfc_rampup_queue_depth(vport, queue_depth);
 
 	if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
 	   ((jiffies - pnode->last_ramp_up_time) >
 		LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
 	   ((jiffies - pnode->last_q_full_time) >
 		LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
-	   (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
-		shost_for_each_device(tmp_sdev, sdev->host) {
+	   (vport->cfg_lun_queue_depth > queue_depth)) {
+		shost_for_each_device(tmp_sdev, shost) {
 			if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
-				if (tmp_sdev->id != sdev->id)
+				if (tmp_sdev->id != scsi_id)
 					continue;
 				if (tmp_sdev->ordered_tags)
 					scsi_adjust_queue_depth(tmp_sdev,
@@ -1884,7 +1889,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		}
 		lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
 			0xFFFFFFFF,
-			sdev->queue_depth - 1, sdev->queue_depth);
+			queue_depth , queue_depth + 1);
 	}
 
 	/*
@@ -1895,8 +1900,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	    NLP_CHK_NODE_ACT(pnode)) {
 		pnode->last_q_full_time = jiffies;
 
-		shost_for_each_device(tmp_sdev, sdev->host) {
-			if (tmp_sdev->id != sdev->id)
+		shost_for_each_device(tmp_sdev, shost) {
+			if (tmp_sdev->id != scsi_id)
 				continue;
 			depth = scsi_track_queue_full(tmp_sdev,
 					tmp_sdev->queue_depth - 1);
@@ -1908,7 +1913,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		 * scsi_track_queue_full.
 		 */
 		if (depth == -1)
-			depth = sdev->host->cmd_per_lun;
+			depth = shost->cmd_per_lun;
 
 		if (depth) {
 			lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
@@ -1924,11 +1929,11 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 	 * If there is a thread waiting for command completion
 	 * wake up the thread.
 	 */
-	spin_lock_irqsave(sdev->host->host_lock, flags);
+	spin_lock_irqsave(shost->host_lock, flags);
 	lpfc_cmd->pCmd = NULL;
 	if (lpfc_cmd->waitq)
 		wake_up(lpfc_cmd->waitq);
-	spin_unlock_irqrestore(sdev->host->host_lock, flags);
+	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	lpfc_release_scsi_buf(phba, lpfc_cmd);
 }
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 74cfa963dfc..eb5c75c45ba 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -184,6 +184,38 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 }
 
+/**
+ * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list.
+ * @phba: Pointer to HBA context object.
+ * @iocblist: List of IOCBs.
+ * @ulpstatus: ULP status in IOCB command field.
+ * @ulpWord4: ULP word-4 in IOCB command field.
+ *
+ * This function is called with a list of IOCBs to cancel. It cancels the IOCB
+ * on the list by invoking the complete callback function associated with the
+ * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond
+ * fields.
+ **/
+void
+lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist,
+		      uint32_t ulpstatus, uint32_t ulpWord4)
+{
+	struct lpfc_iocbq *piocb;
+
+	while (!list_empty(iocblist)) {
+		list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
+
+		if (!piocb->iocb_cmpl)
+			lpfc_sli_release_iocbq(phba, piocb);
+		else {
+			piocb->iocb.ulpStatus = ulpstatus;
+			piocb->iocb.un.ulpWord[4] = ulpWord4;
+			(piocb->iocb_cmpl) (phba, piocb, piocb);
+		}
+	}
+	return;
+}
+
 /**
  * lpfc_sli_iocb_cmd_type - Get the iocb type
  * @iocb_cmnd: iocb command code.
@@ -818,8 +850,8 @@ static struct lpfc_hbq_init lpfc_els_hbq = {
 	.profile = 0,
 	.ring_mask = (1 << LPFC_ELS_RING),
 	.buffer_count = 0,
-	.init_count = 20,
-	.add_count = 5,
+	.init_count = 40,
+	.add_count = 40,
 };
 
 /* HBQ for the extra ring if needed */
@@ -1596,7 +1628,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			 * Ring <ringno> handler: unexpected completion IoTag
 			 * <IoTag>
 			 */
-			lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 					 "0322 Ring %d handler: "
 					 "unexpected completion IoTag x%x "
 					 "Data: x%x x%x x%x x%x\n",
@@ -2324,7 +2356,6 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 {
 	LIST_HEAD(completions);
 	struct lpfc_iocbq *iocb, *next_iocb;
-	IOCB_t *cmd = NULL;
 
 	if (pring->ringno == LPFC_ELS_RING) {
 		lpfc_fabric_abort_hba(phba);
@@ -2343,19 +2374,9 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		iocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		cmd = &iocb->iocb;
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
 }
 
 /**
@@ -2373,8 +2394,6 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
 {
 	LIST_HEAD(txq);
 	LIST_HEAD(txcmplq);
-	struct lpfc_iocbq *iocb;
-	IOCB_t *cmd = NULL;
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring  *pring;
 
@@ -2392,34 +2411,12 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Flush the txq */
-	while (!list_empty(&txq)) {
-		iocb = list_get_first(&txq, struct lpfc_iocbq, list);
-		cmd = &iocb->iocb;
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_DOWN);
 
 	/* Flush the txcmpq */
-	while (!list_empty(&txcmplq)) {
-		iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list);
-		cmd = &iocb->iocb;
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_DOWN);
 }
 
 /**
@@ -3251,6 +3248,21 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_sli_ring *pring;
 
+	/* Check the pmbox pointer first.  There is a race condition
+	 * between the mbox timeout handler getting executed in the
+	 * worklist and the mailbox actually completing. When this
+	 * race condition occurs, the mbox_active will be NULL.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	if (pmbox == NULL) {
+		lpfc_printf_log(phba, KERN_WARNING,
+				LOG_MBOX | LOG_SLI,
+				"0353 Active Mailbox cleared - mailbox timeout "
+				"exiting\n");
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
 	/* Mbox cmd <mbxCommand> timeout */
 	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
@@ -3258,6 +3270,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 			phba->pport->port_state,
 			phba->sli.sli_flag,
 			phba->sli.mbox_active);
+	spin_unlock_irq(&phba->hbalock);
 
 	/* Setting state unknown so lpfc_sli_abort_iocb_ring
 	 * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
@@ -3364,6 +3377,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 		goto out_not_finished;
 	}
 
+	/* If HBA has a deferred error attention, fail the iocb. */
+	if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+		goto out_not_finished;
+	}
+
 	psli = &phba->sli;
 
 	mb = &pmbox->mb;
@@ -3728,6 +3747,10 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	if (unlikely(pci_channel_offline(phba->pcidev)))
 		return IOCB_ERROR;
 
+	/* If HBA has a deferred error attention, fail the iocb. */
+	if (unlikely(phba->hba_flag & DEFER_ERATT))
+		return IOCB_ERROR;
+
 	/*
 	 * We should never get an IOCB if we are in a < LINK_DOWN state
 	 */
@@ -3906,6 +3929,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,
 	uint16_t temp;
 	struct temp_event temp_event_data;
 	struct Scsi_Host *shost;
+	uint32_t *iocb_w;
 
 	icmd = &iocbq->iocb;
 	evt_code = icmd->un.asyncstat.evt_code;
@@ -3913,13 +3937,23 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,
 
 	if ((evt_code != ASYNC_TEMP_WARN) &&
 		(evt_code != ASYNC_TEMP_SAFE)) {
+		iocb_w = (uint32_t *) icmd;
 		lpfc_printf_log(phba,
 			KERN_ERR,
 			LOG_SLI,
 			"0346 Ring %d handler: unexpected ASYNC_STATUS"
-			" evt_code 0x%x\n",
+			" evt_code 0x%x \n"
+			"W0  0x%08x W1  0x%08x W2  0x%08x W3  0x%08x\n"
+			"W4  0x%08x W5  0x%08x W6  0x%08x W7  0x%08x\n"
+			"W8  0x%08x W9  0x%08x W10 0x%08x W11 0x%08x\n"
+			"W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
 			pring->ringno,
-			icmd->un.asyncstat.evt_code);
+			icmd->un.asyncstat.evt_code,
+			iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
+			iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
+			iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
+			iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
+
 		return;
 	}
 	temp_event_data.data = (uint32_t)temp;
@@ -4178,17 +4212,9 @@ lpfc_sli_host_down(struct lpfc_vport *vport)
 
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 
-	while (!list_empty(&completions)) {
-		list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
-			iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_DOWN);
 	return 1;
 }
 
@@ -4215,8 +4241,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 	struct lpfc_sli_ring *pring;
 	struct lpfc_dmabuf *buf_ptr;
 	LPFC_MBOXQ_t *pmb;
-	struct lpfc_iocbq *iocb;
-	IOCB_t *cmd = NULL;
 	int i;
 	unsigned long flags = 0;
 
@@ -4244,18 +4268,9 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 	}
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 
-	while (!list_empty(&completions)) {
-		list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
-		cmd = &iocb->iocb;
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_DOWN);
 
 	spin_lock_irqsave(&phba->hbalock, flags);
 	list_splice_init(&phba->elsbuf, &completions);
@@ -5137,11 +5152,31 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 		return 0;
 	}
 
+	/*
+	 * If there is deferred error attention, do not check for error
+	 * attention
+	 */
+	if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+		spin_unlock_irq(&phba->hbalock);
+		return 0;
+	}
+
 	/* Read chip Host Attention (HA) register */
 	ha_copy = readl(phba->HAregaddr);
 	if (ha_copy & HA_ERATT) {
 		/* Read host status register to retrieve error event */
 		lpfc_sli_read_hs(phba);
+
+		/* Check if there is a deferred error condition is active */
+		if ((HS_FFER1 & phba->work_hs) &&
+			((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+			HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+			phba->hba_flag |= DEFER_ERATT;
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr);
+		}
+
 		/* Set the driver HA work bitmap */
 		phba->work_ha |= HA_ERATT;
 		/* Indicate polling handles this ERATT */
@@ -5230,6 +5265,16 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 				/* Indicate interrupt handler handles ERATT */
 				phba->hba_flag |= HBA_ERATT_HANDLED;
 		}
+
+		/*
+		 * If there is deferred error attention, do not check for any
+		 * interrupt.
+		 */
+		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+			spin_unlock_irq(&phba->hbalock);
+			return IRQ_NONE;
+		}
+
 		/* Clear up only attention source related to slow-path */
 		writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
 			phba->HAregaddr);
@@ -5301,8 +5346,22 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
 			}
 		}
 		spin_lock_irqsave(&phba->hbalock, iflag);
-		if (work_ha_copy & HA_ERATT)
+		if (work_ha_copy & HA_ERATT) {
 			lpfc_sli_read_hs(phba);
+			/*
+			 * Check if there is a deferred error condition
+			 * is active
+			 */
+			if ((HS_FFER1 & phba->work_hs) &&
+				((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+				HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+				phba->hba_flag |= DEFER_ERATT;
+				/* Clear all interrupt enable conditions */
+				writel(0, phba->HCregaddr);
+				readl(phba->HCregaddr);
+			}
+		}
+
 		if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
 			pmb = phba->sli.mbox_active;
 			pmbox = &pmb->mb;
@@ -5466,6 +5525,14 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
 		ha_copy = readl(phba->HAregaddr);
 		/* Clear up only attention source related to fast-path */
 		spin_lock_irqsave(&phba->hbalock, iflag);
+		/*
+		 * If there is deferred error attention, do not check for
+		 * any interrupt.
+		 */
+		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+			spin_unlock_irq(&phba->hbalock);
+			return IRQ_NONE;
+		}
 		writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
 			phba->HAregaddr);
 		readl(phba->HAregaddr); /* flush */
@@ -5558,6 +5625,14 @@ lpfc_intr_handler(int irq, void *dev_id)
 			phba->hba_flag |= HBA_ERATT_HANDLED;
 	}
 
+	/*
+	 * If there is deferred error attention, do not check for any interrupt.
+	 */
+	if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+		spin_unlock_irq(&phba->hbalock);
+		return IRQ_NONE;
+	}
+
 	/* Clear attention sources except link and error attentions */
 	writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
 	readl(phba->HAregaddr); /* flush */
-- 
GitLab


From e832b3ca653895d479c872f995d0a31a0b0bdecd Mon Sep 17 00:00:00 2001
From: James Smart <James.Smart@Emulex.Com>
Date: Mon, 6 Apr 2009 18:48:17 -0400
Subject: [PATCH 0878/1421] [SCSI] lpfc 8.3.1 : Update version to 8.3.1

Update driver version to 8.3.1
Also update copyright end year for driver.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/lpfc/lpfc_version.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 7e32e95c539..e599519e307 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.0"
+#define LPFC_DRIVER_VERSION "8.3.1"
 
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
@@ -26,4 +26,4 @@
 
 #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
 		LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex.  All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex.  All rights reserved."
-- 
GitLab


From b4efdd586bc08cdf5977cad0a90091f44546a930 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Thu, 9 Apr 2009 15:57:10 -0500
Subject: [PATCH 0879/1421] [SCSI] fix q->lock not held warning when target is
 busy

We cannot call blk_plug_device from scsi_target_queue_ready
because the q lock is not held. And we do not need to call
it from there because when we return 0, the scsi_request_fn
not_ready handling will plug the queue for us if needed.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_lib.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d1cb64ad1a3..bb218c8b6e9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1291,10 +1291,8 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
 		if (--starget->target_blocked == 0) {
 			SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
 					 "unblocking target at zero depth\n"));
-		} else {
-			blk_plug_device(sdev->request_queue);
+		} else
 			return 0;
-		}
 	}
 
 	if (scsi_target_is_busy(starget)) {
-- 
GitLab


From fd1b52435a6d9663de896e8437ef067372916ef3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 7 Apr 2009 18:10:06 +0200
Subject: [PATCH 0880/1421] quota: remove obsolete comments in
 fs/quota/Makefile

Get rid of useless comments and the equally useless obj-y
initialization.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/quota/Makefile | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/fs/quota/Makefile b/fs/quota/Makefile
index 385a0831cc9..68d4f6dc057 100644
--- a/fs/quota/Makefile
+++ b/fs/quota/Makefile
@@ -1,12 +1,3 @@
-#
-# Makefile for the Linux filesystems.
-#
-# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-y :=
-
 obj-$(CONFIG_QUOTA)		+= dquot.o
 obj-$(CONFIG_QFMT_V1)		+= quota_v1.o
 obj-$(CONFIG_QFMT_V2)		+= quota_v2.o
-- 
GitLab


From a069e9cee1dba2f847839d325f46ce6976ed1b76 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 9 Apr 2009 18:07:10 +0200
Subject: [PATCH 0881/1421] ext2: missing unlock in ext2_quota_write()

The inode->i_mutex should be unlocked.

Found by smatch (http://repo.or.cz/w/smatch.git).  Compile tested.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/ext2/super.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index f983225266d..5c4afe65224 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -1395,8 +1395,10 @@ static ssize_t ext2_quota_write(struct super_block *sb, int type,
 		blk++;
 	}
 out:
-	if (len == towrite)
+	if (len == towrite) {
+		mutex_unlock(&inode->i_mutex);
 		return err;
+	}
 	if (inode->i_size < off+len-towrite)
 		i_size_write(inode, off+len-towrite);
 	inode->i_version++;
-- 
GitLab


From e37469f68a15feb40ee9f6325d1e1793f90afe39 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 27 Apr 2009 11:55:17 +0100
Subject: [PATCH 0882/1421] FRV: Wire up new syscalls

Wire up new system calls for the FRV arch (preadv and pwritev).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/unistd.h | 4 +++-
 arch/frv/kernel/entry.S       | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index edcfaf5f041..96d78d5d2c4 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -339,10 +339,12 @@
 #define __NR_dup3		330
 #define __NR_pipe2		331
 #define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 333
+#define NR_syscalls 335
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 99060ab507e..1da523b3298 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1525,5 +1525,7 @@ sys_call_table:
 	.long sys_dup3			/* 330 */
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
 syscall_table_size = (. - sys_call_table)
-- 
GitLab


From 9a523d427dc5908a79ce3ff742e9606e852802d6 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 27 Apr 2009 11:55:23 +0100
Subject: [PATCH 0883/1421] FRV: Stop gcc from generating uninitialised
 variable warnings after BUG()

Stop gcc from generating uninitialised variable warnings after BUG().
The problem is that FRV's call into its gdbstub appears to return (if
the function is marked noreturn, then the compiler is under no
obligation to pass it a return address, and so GDB won't know where the
bug happened).

To get around this, we make the do...while wrapper in _debug_bug_trap()
an endless loop from which there's no escape.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/bug.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h
index 6b1b44d7102..2e054508a2f 100644
--- a/arch/frv/include/asm/bug.h
+++ b/arch/frv/include/asm/bug.h
@@ -30,7 +30,7 @@ extern void __debug_bug_printk(const char *file, unsigned line);
 do {						\
 	__debug_bug_trap(signr);		\
 	asm volatile("nop");			\
-} while(0)
+} while(1)
 
 #define HAVE_ARCH_BUG
 #define BUG()					\
@@ -46,7 +46,8 @@ do {						\
 #define HAVE_ARCH_KGDB_BAD_PAGE
 #define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
 #endif
-#endif
+
+#endif /* CONFIG_BUG */
 
 #include <asm-generic/bug.h>
 
-- 
GitLab


From 135ea137e3c2872448c12d3a8890389fa64990c6 Mon Sep 17 00:00:00 2001
From: Martin Petermann <martin@linux.vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:01 +0200
Subject: [PATCH 0884/1421] [SCSI] zfcp: Avoid referencing freed memory in req
 send

Avoid referencing a fsf request after sending it in fcp_fsf_req_send,
it might have already completed and deallocated.

Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fsf.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index b29f3121b66..fa896dc600b 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -766,8 +766,9 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter,
 static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
 {
 	struct zfcp_adapter *adapter = req->adapter;
-	unsigned long flags;
-	int idx;
+	unsigned long	     flags;
+	int		     idx;
+	int		     with_qtcb = (req->qtcb != NULL);
 
 	/* put allocated FSF request into hash table */
 	spin_lock_irqsave(&adapter->req_list_lock, flags);
@@ -789,7 +790,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
 	}
 
 	/* Don't increase for unsolicited status */
-	if (req->qtcb)
+	if (with_qtcb)
 		adapter->fsf_req_seq_no++;
 	adapter->req_no++;
 
-- 
GitLab


From 306b6edcdd7b6cc5fee50d48fc398201fa3df841 Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:02 +0200
Subject: [PATCH 0885/1421] [SCSI] zfcp: Enable auto-port discovery for NPIV.

Since we're setting the host port type now to FC_PORTTYPE_NPIV
for adapters running in NPIV mode we should allow this port type
for auto-port scanning as well.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index e8d032b9dfb..e56141d1040 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -637,7 +637,8 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter)
 	max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES;
 	max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE;
 
-	if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
+	if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
+	    fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
 		return 0;
 
 	ret = zfcp_wka_port_get(&adapter->nsp);
-- 
GitLab


From ada81b748b768eb5b75567fd1db5e87ba5c98bf0 Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:03 +0200
Subject: [PATCH 0886/1421] [SCSI] zfcp: Dont call zfcp_fsf_req_free on NULL
 pointer

Fix problem that zfcp_fsf_exchange_config_data_sync and
zfcp_fsf_exchange_config_data_sync could try to call zfcp_fsf_req_free
with a NULL pointer.

Reviewed-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fsf.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index fa896dc600b..a8e84065d00 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1254,13 +1254,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 
 	spin_lock_bh(&adapter->req_q_lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
-		goto out;
+		goto out_unlock;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  0, NULL);
 	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
-		goto out;
+		goto out_unlock;
 	}
 
 	sbale = zfcp_qdio_sbale_req(req);
@@ -1279,14 +1279,16 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
-out:
 	spin_unlock_bh(&adapter->req_q_lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
 
 	zfcp_fsf_req_free(req);
+	return retval;
 
+out_unlock:
+	spin_unlock_bh(&adapter->req_q_lock);
 	return retval;
 }
 
@@ -1353,13 +1355,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 
 	spin_lock_bh(&adapter->req_q_lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
-		goto out;
+		goto out_unlock;
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
 				  NULL);
 	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
-		goto out;
+		goto out_unlock;
 	}
 
 	if (data)
@@ -1372,14 +1374,18 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	req->handler = zfcp_fsf_exchange_port_data_handler;
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
-out:
 	spin_unlock_bh(&adapter->req_q_lock);
+
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
 	zfcp_fsf_req_free(req);
 
 	return retval;
+
+out_unlock:
+	spin_unlock_bh(&adapter->req_q_lock);
+	return retval;
 }
 
 static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
-- 
GitLab


From 92d5193b467c68e8432d6878980621c787e735af Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:04 +0200
Subject: [PATCH 0887/1421] [SCSI] zfcp: Dont block zfcp_wq with scan

When running the scsi_scan from the zfcp workqueue and the target
device does not respond, the zfcp workqueue can block until the
scsi_scan hits a timeout. Move the work to the scsi host workqueue,
since this one is also used for the scan from the SCSI midlayer.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_aux.c  |  5 ++--
 drivers/s390/scsi/zfcp_def.h  |  2 +-
 drivers/s390/scsi/zfcp_erp.c  | 50 +++--------------------------------
 drivers/s390/scsi/zfcp_ext.h  |  1 +
 drivers/s390/scsi/zfcp_scsi.c | 17 ++++++++++++
 5 files changed, 25 insertions(+), 50 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 616c60ffcf2..5a01ef9aeb6 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -97,9 +97,7 @@ static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
 	ccw_device_set_online(adapter->ccw_device);
 
 	zfcp_erp_wait(adapter);
-	wait_event(adapter->erp_done_wqh,
-		   !(atomic_read(&unit->status) &
-				ZFCP_STATUS_UNIT_SCSI_WORK_PENDING));
+	flush_work(&unit->scsi_work);
 
 	down(&zfcp_data.config_sema);
 	zfcp_unit_put(unit);
@@ -279,6 +277,7 @@ struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *port, u64 fcp_lun)
 
 	atomic_set(&unit->refcount, 0);
 	init_waitqueue_head(&unit->remove_wq);
+	INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
 
 	unit->port = port;
 	unit->fcp_lun = fcp_lun;
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index a0318630f04..4c362a9069f 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -255,7 +255,6 @@ enum zfcp_wka_status {
 /* logical unit status */
 #define ZFCP_STATUS_UNIT_SHARED			0x00000004
 #define ZFCP_STATUS_UNIT_READONLY		0x00000008
-#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING	0x00000020
 
 /* FSF request status (this does not have a common part) */
 #define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT	0x00000002
@@ -530,6 +529,7 @@ struct zfcp_unit {
 	struct zfcp_erp_action erp_action;     /* pending error recovery */
         atomic_t               erp_counter;
 	struct zfcp_latencies	latencies;
+	struct work_struct	scsi_work;
 };
 
 /* FSF request */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 631bdb1dfd6..4e160523c31 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -1176,48 +1176,6 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action)
 	}
 }
 
-struct zfcp_erp_add_work {
-	struct zfcp_unit  *unit;
-	struct work_struct work;
-};
-
-static void zfcp_erp_scsi_scan(struct work_struct *work)
-{
-	struct zfcp_erp_add_work *p =
-		container_of(work, struct zfcp_erp_add_work, work);
-	struct zfcp_unit *unit = p->unit;
-	struct fc_rport *rport = unit->port->rport;
-
-	if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
-		scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
-			 scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
-	atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
-	zfcp_unit_put(unit);
-	wake_up(&unit->port->adapter->erp_done_wqh);
-	kfree(p);
-}
-
-static void zfcp_erp_schedule_work(struct zfcp_unit *unit)
-{
-	struct zfcp_erp_add_work *p;
-
-	p = kzalloc(sizeof(*p), GFP_KERNEL);
-	if (!p) {
-		dev_err(&unit->port->adapter->ccw_device->dev,
-			"Registering unit 0x%016Lx on port 0x%016Lx failed\n",
-			(unsigned long long)unit->fcp_lun,
-			(unsigned long long)unit->port->wwpn);
-		return;
-	}
-
-	zfcp_unit_get(unit);
-	atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
-	INIT_WORK(&p->work, zfcp_erp_scsi_scan);
-	p->unit = unit;
-	if (!queue_work(zfcp_data.work_queue, &p->work))
-		zfcp_unit_put(unit);
-}
-
 static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
 {
 	struct zfcp_adapter *adapter = act->adapter;
@@ -1226,11 +1184,11 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
 
 	switch (act->action) {
 	case ZFCP_ERP_ACTION_REOPEN_UNIT:
-		flush_work(&port->rport_work);
 		if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
-			if (!(atomic_read(&unit->status) &
-			      ZFCP_STATUS_UNIT_SCSI_WORK_PENDING))
-				zfcp_erp_schedule_work(unit);
+			zfcp_unit_get(unit);
+			if (scsi_queue_work(unit->port->adapter->scsi_host,
+					    &unit->scsi_work) <= 0)
+				zfcp_unit_put(unit);
 		}
 		zfcp_unit_put(unit);
 		break;
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index f6399ca97bc..df740f10d26 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -158,6 +158,7 @@ extern void zfcp_scsi_rport_work(struct work_struct *);
 extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
 extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *);
 extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *);
+extern void zfcp_scsi_scan(struct work_struct *);
 
 /* zfcp_sysfs.c */
 extern struct attribute_group zfcp_sysfs_unit_attrs;
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 58201e1ae47..5b11386d70b 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -583,6 +583,23 @@ void zfcp_scsi_rport_work(struct work_struct *work)
 }
 
 
+void zfcp_scsi_scan(struct work_struct *work)
+{
+	struct zfcp_unit *unit = container_of(work, struct zfcp_unit,
+					      scsi_work);
+	struct fc_rport *rport;
+
+	flush_work(&unit->port->rport_work);
+	rport = unit->port->rport;
+
+	if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+		scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+				 scsilun_to_int((struct scsi_lun *)
+						&unit->fcp_lun), 0);
+
+	zfcp_unit_put(unit);
+}
+
 struct fc_function_template zfcp_transport_functions = {
 	.show_starget_port_id = 1,
 	.show_starget_port_name = 1,
-- 
GitLab


From 828bc1212a685918bbdb5866504b63eea2c241f5 Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:05 +0200
Subject: [PATCH 0888/1421] [SCSI] zfcp: Set WKA-port to offline on adapter
 deactivation

The nameserver port might be in state online when the adapter is
offlined. On adapter reactivation the nameserver port is not
re-opened due to the PORT_ONLINE status. This results in an
unsuccessful recovery. In forcing the nameserver port status
to offline on all adapter offline events this issue is prevented.

Waiting for the reference count to drop to zero in
zfcp_wka_port_offline is not required, so remove it.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_aux.c |  3 ++-
 drivers/s390/scsi/zfcp_ccw.c |  1 -
 drivers/s390/scsi/zfcp_erp.c |  1 +
 drivers/s390/scsi/zfcp_ext.h |  1 +
 drivers/s390/scsi/zfcp_fc.c  | 15 ++++++++-------
 5 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 5a01ef9aeb6..a00d2bb9559 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -524,6 +524,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 
 	atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
 
+	zfcp_fc_nameserver_init(adapter);
+
 	if (!zfcp_adapter_scsi_register(adapter))
 		return 0;
 
@@ -552,7 +554,6 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
 
 	cancel_work_sync(&adapter->scan_work);
 	cancel_work_sync(&adapter->stat_work);
-	cancel_delayed_work_sync(&adapter->nsp.work);
 	zfcp_adapter_scsi_unregister(adapter);
 	sysfs_remove_group(&adapter->ccw_device->dev.kobj,
 			   &zfcp_sysfs_adapter_attrs);
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index cfb0dcb6e3f..733fe3bf628 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -108,7 +108,6 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
 	/* initialize request counter */
 	BUG_ON(!zfcp_reqlist_isempty(adapter));
 	adapter->req_no = 0;
-	zfcp_fc_nameserver_init(adapter);
 
 	zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL,
 				       ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 4e160523c31..b73e37027eb 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -719,6 +719,7 @@ static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act)
 	zfcp_qdio_close(adapter);
 	zfcp_fsf_req_dismiss_all(adapter);
 	adapter->fsf_req_seq_no = 0;
+	zfcp_fc_wka_port_force_offline(&adapter->nsp);
 	/* all ports and units are closed */
 	zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL,
 				       ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index df740f10d26..2e31b536548 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -106,6 +106,7 @@ extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *);
 extern void zfcp_test_link(struct zfcp_port *);
 extern void zfcp_fc_link_test_work(struct work_struct *);
 extern void zfcp_fc_nameserver_init(struct zfcp_adapter *);
+extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *);
 
 /* zfcp_fsf.c */
 extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index e56141d1040..5d42929fe2f 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -98,13 +98,6 @@ static void zfcp_wka_port_offline(struct work_struct *work)
 	struct zfcp_wka_port *wka_port =
 			container_of(dw, struct zfcp_wka_port, work);
 
-	/* Don't wait forvever. If the wka_port is too busy take it offline
-	   through a new call later */
-	if (!wait_event_timeout(wka_port->completion_wq,
-				atomic_read(&wka_port->refcount) == 0,
-				HZ >> 1))
-		return;
-
 	mutex_lock(&wka_port->mutex);
 	if ((atomic_read(&wka_port->refcount) != 0) ||
 	    (wka_port->status != ZFCP_WKA_PORT_ONLINE))
@@ -142,6 +135,14 @@ void zfcp_fc_nameserver_init(struct zfcp_adapter *adapter)
 	INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline);
 }
 
+void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka)
+{
+	cancel_delayed_work_sync(&wka->work);
+	mutex_lock(&wka->mutex);
+	wka->status = ZFCP_WKA_PORT_OFFLINE;
+	mutex_unlock(&wka->mutex);
+}
+
 static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 				   struct fcp_rscn_element *elem)
 {
-- 
GitLab


From 94ab4b38b2ab35a8ca955f4821c970a0ed7ec9ec Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:06 +0200
Subject: [PATCH 0889/1421] [SCSI] zfcp: avoid false ERP complete due to sema
 race

The ERP thread is performing a task before it is executing the
corresponding down on the semaphore. The response handler of the
just started exchange config should wait for the completion by
performing a down on this semaphore. Since this semaphore is still
positive from the ERP enqueue the handler won't wait and therefore
the exchange config will always fail leaving the adapter in error.
The problem can be solved by performing the down on the semaphore
before starting an ERP task. This is the logically correct order.
Only walk the ERP loop if there is a task to perform.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_erp.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index b73e37027eb..fdc9b4352a6 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -1311,6 +1311,11 @@ static int zfcp_erp_thread(void *data)
 
 	while (!(atomic_read(&adapter->status) &
 		 ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) {
+
+		zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
+		ignore = down_interruptible(&adapter->erp_ready_sem);
+		zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
+
 		write_lock_irqsave(&adapter->erp_lock, flags);
 		next = adapter->erp_ready_head.next;
 		write_unlock_irqrestore(&adapter->erp_lock, flags);
@@ -1322,10 +1327,6 @@ static int zfcp_erp_thread(void *data)
 			if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED)
 				zfcp_erp_wakeup(adapter);
 		}
-
-		zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
-		ignore = down_interruptible(&adapter->erp_ready_sem);
-		zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
 	}
 
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status);
-- 
GitLab


From d81ad31c6cf4e318e6b94c959bd9a56ca440b279 Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:07 +0200
Subject: [PATCH 0890/1421] [SCSI] zfcp: no port recovery after storage side
 error inject

The remote port remains in error state even if the connection
is re-established. A wrong precondition check was performed on
the port status leading to a cancellation of the port reopen.
Remove the pre-req check because it's not required and better
handled within the ERP.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 5d42929fe2f..a0f925013ac 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -432,11 +432,6 @@ void zfcp_fc_link_test_work(struct work_struct *work)
 		container_of(work, struct zfcp_port, test_link_work);
 	int retval;
 
-	if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) {
-		zfcp_port_put(port);
-		return; /* port erp is running and will update rport status */
-	}
-
 	zfcp_port_get(port);
 	port->rport_task = RPORT_DEL;
 	zfcp_scsi_rport_work(&port->rport_work);
-- 
GitLab


From 048225e3f44f07c0f67e9665be0b4f18788de0eb Mon Sep 17 00:00:00 2001
From: Martin Petermann <martin@linux.vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:08 +0200
Subject: [PATCH 0891/1421] [SCSI] zfcp: remove unit will fail if add unit is
 not finished

On some hardware it can take some time to add a unit. If
some remove this unit during this process the remove will
fail.

Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_sysfs.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 9a3b8e261c0..3e51e64d110 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -254,12 +254,21 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev,
 
 	write_lock_irq(&zfcp_data.config_lock);
 	unit = zfcp_get_unit_by_lun(port, fcp_lun);
-	if (unit && (atomic_read(&unit->refcount) == 0)) {
-		zfcp_unit_get(unit);
-		atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
-		list_move(&unit->list, &unit_remove_lh);
-	} else
-		unit = NULL;
+	if (unit) {
+		write_unlock_irq(&zfcp_data.config_lock);
+		/* wait for possible timeout during SCSI probe */
+		flush_work(&unit->scsi_work);
+		write_lock_irq(&zfcp_data.config_lock);
+
+		if (atomic_read(&unit->refcount) == 0) {
+			zfcp_unit_get(unit);
+			atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
+					&unit->status);
+			list_move(&unit->list, &unit_remove_lh);
+		} else {
+			unit = NULL;
+		}
+	}
 
 	write_unlock_irq(&zfcp_data.config_lock);
 
-- 
GitLab


From f7306bf6150161689aaa445c433699895f446208 Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:09 +0200
Subject: [PATCH 0892/1421] [SCSI] zfcp: Let actcli handle control file errors

Error codes specific to the control file requests are evaluated by the
actcli tool, so don't report -ENXIO for those. Generic problems are
still checked for outside the command specific handler.

Reviewed-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fsf.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index a8e84065d00..bd2b2376689 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2479,8 +2479,6 @@ out:
 
 static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req)
 {
-	if (req->qtcb->header.fsf_status != FSF_GOOD)
-		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 }
 
 /**
-- 
GitLab


From 5b43e719308143ac02e6f4ee24132f8acad99ea7 Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Fri, 17 Apr 2009 15:08:10 +0200
Subject: [PATCH 0893/1421] [SCSI] zfcp: no port recovery after ADISC request
 timeout

A remote port remains in error state even if we receive a RSCN
stating that the connection is re-established. The port recovery
is not started due to a flag which is not reset.
The solution is to clear the flag in question before we trigger a ERP.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index a0f925013ac..db409684e06 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -373,7 +373,8 @@ static void zfcp_fc_adisc_handler(unsigned long data)
 
 	if (adisc->els.status) {
 		/* request rejected or timed out */
-		zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL);
+		zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
+					    "fcadh_1", NULL);
 		goto out;
 	}
 
-- 
GitLab


From c6936e7f34383db2f5038dfa2f0c168ebc2920e5 Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:11 +0200
Subject: [PATCH 0894/1421] [SCSI] zfcp: Fix abort handler for completions in
 progress

When the abort handler cannot find a pending FSF request, the request
completion could just be running. This means we cannot return SUCCESS,
since this would lead to call to scsi_done after exiting the SCSI
error handler which is not allowed.

Reviewed-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 5b11386d70b..e7d06520906 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -171,7 +171,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 		write_unlock_irqrestore(&adapter->abort_lock, flags);
 		zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
 					  old_req_id);
-		return SUCCESS;
+		return FAILED; /* completion could be in progress */
 	}
 	old_req->data = NULL;
 
-- 
GitLab


From 7001f0c4863230dd1560425fa0f5aad9e21716b8 Mon Sep 17 00:00:00 2001
From: Martin Petermann <martin.petermann@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:12 +0200
Subject: [PATCH 0895/1421] [SCSI] zfcp: revert previous patch for sbal
 counting

The current sbal counting can be wrong if a fsf request is
waiting for free sbals and at the same time qdio request queue
is shutdown and re-opened. Revering a previous patch fixes this
issue.

Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fsf.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index bd2b2376689..3f365ace771 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -645,30 +645,30 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
 	}
 }
 
-static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
-	__releases(&adapter->req_q_lock)
-	__acquires(&adapter->req_q_lock)
+static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter)
 {
 	struct zfcp_qdio_queue *req_q = &adapter->req_q;
-	long ret;
 
-	if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE)
-		return -EIO;
-	if (atomic_read(&req_q->count) > 0)
-		return 0;
+	spin_lock_bh(&adapter->req_q_lock);
+	if (atomic_read(&req_q->count))
+		return 1;
+	spin_unlock_bh(&adapter->req_q_lock);
+	return 0;
+}
+
+static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
+{
+	long ret;
 
-	atomic_dec(&req_q->count);
 	spin_unlock_bh(&adapter->req_q_lock);
 	ret = wait_event_interruptible_timeout(adapter->request_wq,
-					atomic_read(&req_q->count) >= 0,
-					5 * HZ);
-	spin_lock_bh(&adapter->req_q_lock);
-	atomic_inc(&req_q->count);
-
+			       zfcp_fsf_sbal_check(adapter), 5 * HZ);
 	if (ret > 0)
 		return 0;
 	if (!ret)
 		atomic_inc(&adapter->qdio_outb_full);
+
+	spin_lock_bh(&adapter->req_q_lock);
 	return -EIO;
 }
 
-- 
GitLab


From 6ab35c0713daf8cd68f272a4be8dfc02c86bbd3b Mon Sep 17 00:00:00 2001
From: Martin Petermann <martin.petermann@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:13 +0200
Subject: [PATCH 0896/1421] [SCSI] zfcp: Fix port reference counting

If this problem appears zfcp ports cannot be de-queued since it is
checked for a zero refcount. The port reference counting is wrong for
existing zfcp ports when e.g. an adapter gets on-line again. During
port scanning the reference counting for existing ports should not be
changed.

Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index db409684e06..19ae0842047 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -539,6 +539,9 @@ static void zfcp_validate_port(struct zfcp_port *port)
 {
 	struct zfcp_adapter *adapter = port->adapter;
 
+	if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC))
+		return;
+
 	atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status);
 
 	if ((port->supported_classes != 0) ||
@@ -599,10 +602,8 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries)
 		if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
 			continue;
 		port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
-		if (port) {
-			zfcp_port_get(port);
+		if (port)
 			continue;
-		}
 
 		port = zfcp_port_enqueue(adapter, acc->wwpn,
 					 ZFCP_STATUS_COMMON_NOESC, d_id);
-- 
GitLab


From 3869bb6e73f5f55ce16b13025726b0bfdf1f4aae Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:14 +0200
Subject: [PATCH 0897/1421] [SCSI] zfcp: Reference counting for cfdc requests

Before dropping the reference count with zfcp_adapter_put, increase it
with zfcp_adapter_get when issuing cfdc requests.

Reviewed-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_cfdc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index 10cbfd172a2..8305c874e86 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -4,7 +4,7 @@
  * Userspace interface for accessing the
  * Access Control Lists / Control File Data Channel
  *
- * Copyright IBM Corporation 2008
+ * Copyright IBM Corporation 2008, 2009
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -197,6 +197,7 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command,
 		retval = -ENXIO;
 		goto free_buffer;
 	}
+	zfcp_adapter_get(adapter);
 
 	retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
 				    data_user->control_file);
-- 
GitLab


From 70932935b61ee3dcc5a419ec4c367feb2ff808e4 Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Fri, 17 Apr 2009 15:08:15 +0200
Subject: [PATCH 0898/1421] [SCSI] zfcp: Fix oops when port disappears

The zfcp_port might have been removed, while the FC fast_io_fail timer
is still running and could trigger the terminate_rport_io callback.
Set the pointer to the zfcp_port to NULL and check accordingly
before using it.

Reviewed-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_aux.c  |  3 +--
 drivers/s390/scsi/zfcp_fsf.c  |  4 ++++
 drivers/s390/scsi/zfcp_scsi.c | 25 +++++++++++++++++++------
 3 files changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index a00d2bb9559..3ac27ee4739 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -671,8 +671,7 @@ void zfcp_port_dequeue(struct zfcp_port *port)
 	list_del(&port->list);
 	write_unlock_irq(&zfcp_data.config_lock);
 	if (port->rport)
-		fc_remote_port_delete(port->rport);
-	port->rport = NULL;
+		port->rport->dd_data = NULL;
 	zfcp_adapter_put(port->adapter);
 	sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs);
 	device_unregister(&port->sysfs_device);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 3f365ace771..74dee32afba 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -172,12 +172,16 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id,
 					 struct fsf_link_down_info *link_down)
 {
 	struct zfcp_adapter *adapter = req->adapter;
+	unsigned long flags;
 
 	if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
 		return;
 
 	atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
+
+	read_lock_irqsave(&zfcp_data.config_lock, flags);
 	zfcp_scsi_schedule_rports_block(adapter);
+	read_unlock_irqrestore(&zfcp_data.config_lock, flags);
 
 	if (!link_down)
 		goto out;
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index e7d06520906..e8fbeaeb5fb 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -486,10 +486,12 @@ static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
  */
 static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
 {
-	struct zfcp_port *port = rport->dd_data;
+	struct zfcp_port *port;
 
 	write_lock_irq(&zfcp_data.config_lock);
-	port->rport = NULL;
+	port = rport->dd_data;
+	if (port)
+		port->rport = NULL;
 	write_unlock_irq(&zfcp_data.config_lock);
 }
 
@@ -503,9 +505,18 @@ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
  */
 static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
 {
-	struct zfcp_port *port = rport->dd_data;
+	struct zfcp_port *port;
+
+	write_lock_irq(&zfcp_data.config_lock);
+	port = rport->dd_data;
+	if (port)
+		zfcp_port_get(port);
+	write_unlock_irq(&zfcp_data.config_lock);
 
-	zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+	if (port) {
+		zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+		zfcp_port_put(port);
+	}
 }
 
 static void zfcp_scsi_rport_register(struct zfcp_port *port)
@@ -534,8 +545,10 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port)
 
 static void zfcp_scsi_rport_block(struct zfcp_port *port)
 {
-	if (port->rport)
-		fc_remote_port_delete(port->rport);
+	struct fc_rport *rport = port->rport;
+
+	if (rport)
+		fc_remote_port_delete(rport);
 }
 
 void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
-- 
GitLab


From 9a6510eb3f030cedba32664498a610dc6d084d46 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 21 Apr 2009 15:32:31 -0500
Subject: [PATCH 0899/1421] [SCSI] iscsi_tcp: don't fire conn error if pdu init
 fails

If a command's scsi cmd pdu setup fails then we can just fail
the IO to the scsi layer. If a DATA_OUT for a R2T fails then
we will want to drop the session, because it means we got a
bad request from the target (iscsi protocol error).

This patch has us propogate the error upwards so libiscsi_tcp
or libiscsi can decide what the best action is to take. It
also fixes a bug where we could try to grab the session lock
while holding it, because if iscsi_tcp drops the session in the
pdu setup callout the session lock is held when setting up the
scsi cmd pdu.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/iscsi_tcp.c    | 2 +-
 drivers/scsi/libiscsi_tcp.c | 5 ++++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index b3e5e08e44a..f97fc7e9de7 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -463,7 +463,7 @@ static int iscsi_sw_tcp_pdu_init(struct iscsi_task *task,
 	}
 
 	if (err) {
-		iscsi_conn_failure(conn, err);
+		/* got invalid offset/len */
 		return -EIO;
 	}
 	return 0;
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 91f8ce4d8d0..b579ca9f483 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -1036,8 +1036,11 @@ flush:
 
 	rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent,
 					 r2t->data_count);
-	if (rc)
+	if (rc) {
+		iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED);
 		return rc;
+	}
+
 	r2t->sent += r2t->data_count;
 	goto flush;
 }
-- 
GitLab


From 6b5d6c443a9b4fd71b633cef66b5db4de8a85787 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 21 Apr 2009 15:32:32 -0500
Subject: [PATCH 0900/1421] [SCSI] cxgb3i, iser, iscsi_tcp: set target can
 queue

Set target can queue limit to the number of preallocated
session tasks we have.

This along with the cxgb3i can_queue patch will fix a throughput
problem where it could only queue one LU worth of data at a time.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/infiniband/ulp/iser/iscsi_iser.c |  1 +
 drivers/scsi/cxgb3i/cxgb3i_iscsi.c       |  1 +
 drivers/scsi/iscsi_tcp.c                 |  1 +
 drivers/scsi/libiscsi.c                  | 10 ++++++++++
 include/scsi/libiscsi.h                  |  2 ++
 5 files changed, 15 insertions(+)

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 13d7674b293..75223f50de5 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -599,6 +599,7 @@ static struct scsi_host_template iscsi_iser_sht = {
 	.eh_abort_handler       = iscsi_eh_abort,
 	.eh_device_reset_handler= iscsi_eh_device_reset,
 	.eh_target_reset_handler= iscsi_eh_target_reset,
+	.target_alloc		= iscsi_target_alloc,
 	.use_clustering         = DISABLE_CLUSTERING,
 	.proc_name              = "iscsi_iser",
 	.this_id                = -1,
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index fff8e432764..b3ca3a05f0d 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -883,6 +883,7 @@ static struct scsi_host_template cxgb3i_host_template = {
 	.eh_abort_handler	= iscsi_eh_abort,
 	.eh_device_reset_handler = iscsi_eh_device_reset,
 	.eh_target_reset_handler = iscsi_eh_target_reset,
+	.target_alloc		= iscsi_target_alloc,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.this_id		= -1,
 };
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index f97fc7e9de7..b7c092d63bb 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -851,6 +851,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = {
 	.use_clustering         = DISABLE_CLUSTERING,
 	.slave_alloc            = iscsi_sw_tcp_slave_alloc,
 	.slave_configure        = iscsi_sw_tcp_slave_configure,
+	.target_alloc		= iscsi_target_alloc,
 	.proc_name		= "iscsi_tcp",
 	.this_id		= -1,
 };
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 68962835916..e72b4ad47d3 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1463,6 +1463,16 @@ int iscsi_change_queue_depth(struct scsi_device *sdev, int depth)
 }
 EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
 
+int iscsi_target_alloc(struct scsi_target *starget)
+{
+	struct iscsi_cls_session *cls_session = starget_to_session(starget);
+	struct iscsi_session *session = cls_session->dd_data;
+
+	starget->can_queue = session->scsi_cmds_max;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iscsi_target_alloc);
+
 void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
 {
 	struct iscsi_session *session = cls_session->dd_data;
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 7ffaed2f94d..0289f5745fb 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -36,6 +36,7 @@ struct scsi_transport_template;
 struct scsi_host_template;
 struct scsi_device;
 struct Scsi_Host;
+struct scsi_target;
 struct scsi_cmnd;
 struct socket;
 struct iscsi_transport;
@@ -350,6 +351,7 @@ extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
 					  bool xmit_can_sleep);
 extern void iscsi_host_remove(struct Scsi_Host *shost);
 extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
 
 /*
  * session management
-- 
GitLab


From dd0af9f94e54efb13ee050ebac11909215ef02c2 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 21 Apr 2009 15:32:33 -0500
Subject: [PATCH 0901/1421] [SCSI] cxgb3i: fix can_queue and cmd_per_lun
 initialization

cxgb3i was setting can_queue to only 128 commands, and was
setting the can_queue and cmd_per_lun to the same value.

This sets the can_queue to 1024 commands, and sets the cmd_per_lun
to a safer default of 32.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/cxgb3i/cxgb3i.h       | 2 +-
 drivers/scsi/cxgb3i/cxgb3i_iscsi.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index d362860e750..59b0958d2d1 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -34,7 +34,7 @@
 #include "cxgb3i_offload.h"
 #include "cxgb3i_ddp.h"
 
-#define CXGB3I_SCSI_QDEPTH_DFLT	128
+#define CXGB3I_SCSI_HOST_QDEPTH 1024
 #define CXGB3I_MAX_TARGET	CXGB3I_MAX_CONN
 #define CXGB3I_MAX_LUN		512
 #define ISCSI_PDU_NONPAYLOAD_MAX \
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index b3ca3a05f0d..9212400b9b1 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -876,10 +876,10 @@ static struct scsi_host_template cxgb3i_host_template = {
 	.proc_name		= "cxgb3i",
 	.queuecommand		= iscsi_queuecommand,
 	.change_queue_depth	= iscsi_change_queue_depth,
-	.can_queue		= CXGB3I_SCSI_QDEPTH_DFLT - 1,
+	.can_queue		= CXGB3I_SCSI_HOST_QDEPTH,
 	.sg_tablesize		= SG_ALL,
 	.max_sectors		= 0xFFFF,
-	.cmd_per_lun		= CXGB3I_SCSI_QDEPTH_DFLT,
+	.cmd_per_lun		= ISCSI_DEF_CMD_PER_LUN,
 	.eh_abort_handler	= iscsi_eh_abort,
 	.eh_device_reset_handler = iscsi_eh_device_reset,
 	.eh_target_reset_handler = iscsi_eh_target_reset,
-- 
GitLab


From 1393109f23f8ad753a60a3e461c6caa96d8524f3 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 21 Apr 2009 15:32:34 -0500
Subject: [PATCH 0902/1421] [SCSI] cxgb3i: fix cpu use abuse during writes

When doing a lot (128) of large writes (256K) we can hit the cxgb3_snd_win
check pretty easily. The driver's xmit thread then takes 100% of the cpu.

The driver should not be returning -EAGAIN for this problem. It should
be returing -ENOBUFS, then when the window is opened again it should
queue the xmit thread (it already wakes the xmit thread).

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/cxgb3i/cxgb3i_offload.c |  4 +++-
 drivers/scsi/cxgb3i/cxgb3i_pdu.c     | 19 ++++++++++---------
 2 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 4d8654cdbda..e11c9c180f3 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1737,7 +1737,7 @@ int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb)
 		c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
 				c3cn, c3cn->write_seq, c3cn->snd_una,
 				cxgb3_snd_win);
-		err = -EAGAIN;
+		err = -ENOBUFS;
 		goto out_err;
 	}
 
@@ -1775,6 +1775,8 @@ done:
 out_err:
 	if (copied == 0 && err == -EPIPE)
 		copied = c3cn->err ? c3cn->err : -EPIPE;
+	else
+		copied = err;
 	goto done;
 }
 
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
index 7eebc9a7cb3..70910507117 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
@@ -400,17 +400,18 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
 		return 0;
 	}
 
-	if (err < 0 && err != -EAGAIN) {
-		kfree_skb(skb);
-		cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
-				task->itt, skb, skb->len, skb->data_len, err);
-		iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
-		iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+	if (err == -EAGAIN || err == -ENOBUFS) {
+		/* reset skb to send when we are called again */
+		tdata->skb = skb;
 		return err;
 	}
-	/* reset skb to send when we are called again */
-	tdata->skb = skb;
-	return -EAGAIN;
+
+	kfree_skb(skb);
+	cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
+			task->itt, skb, skb->len, skb->data_len, err);
+	iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
+	iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+	return err;
 }
 
 int cxgb3i_pdu_init(void)
-- 
GitLab


From a53922ddcf69f4bd8aa321b1fb30418df7a86c61 Mon Sep 17 00:00:00 2001
From: "kxie@chelsio.com" <kxie@chelsio.com>
Date: Tue, 21 Apr 2009 15:32:35 -0500
Subject: [PATCH 0903/1421] [SCSI] cxgb3i: fix ddp map overrun

(version 2)

Fixed a bug in calculating ddp map range when search for free entries:
it was going beyond the end by one, thus corrupting gl_skb[0].

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/cxgb3i/cxgb3i_ddp.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
index d06a661c209..99c91254790 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
@@ -120,20 +120,26 @@ static void clear_ddp_map(struct cxgb3i_ddp_info *ddp, unsigned int tag,
 }
 
 static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp,
-					  int start, int max, int count,
+					  unsigned int start, unsigned int max,
+					  unsigned int count,
 					  struct cxgb3i_gather_list *gl)
 {
-	unsigned int i, j;
+	unsigned int i, j, k;
 
+	/* not enough entries */
+	if ((max - start) < count)
+		return -EBUSY;
+
+	max -= count;
 	spin_lock(&ddp->map_lock);
-	for (i = start; i <= max;) {
-		for (j = 0; j < count; j++) {
-			if (ddp->gl_map[i + j])
+	for (i = start; i < max;) {
+		for (j = 0, k = i; j < count; j++, k++) {
+			if (ddp->gl_map[k])
 				break;
 		}
 		if (j == count) {
-			for (j = 0; j < count; j++)
-				ddp->gl_map[i + j] = gl;
+			for (j = 0, k = i; j < count; j++, k++)
+				ddp->gl_map[k] = gl;
 			spin_unlock(&ddp->map_lock);
 			return i;
 		}
@@ -354,7 +360,7 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid,
 	struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
 	struct pagepod_hdr hdr;
 	unsigned int npods;
-	int idx = -1, idx_max;
+	int idx = -1;
 	int err = -ENOMEM;
 	u32 sw_tag = *tagp;
 	u32 tag;
@@ -367,17 +373,17 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid,
 	}
 
 	npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT;
-	idx_max = ddp->nppods - npods + 1;
 
 	if (ddp->idx_last == ddp->nppods)
-		idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl);
+		idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl);
 	else {
 		idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1,
-					      idx_max, npods, gl);
-		if (idx < 0 && ddp->idx_last >= npods)
+					      ddp->nppods, npods, gl);
+		if (idx < 0 && ddp->idx_last >= npods) {
 			idx = ddp_find_unused_entries(ddp, 0,
-						      ddp->idx_last - npods + 1,
+				min(ddp->idx_last + npods, ddp->nppods),
 						      npods, gl);
+		}
 	}
 	if (idx < 0) {
 		ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n",
-- 
GitLab


From 0d228c0f7f9e3ade147e57682915c55b92448230 Mon Sep 17 00:00:00 2001
From: Abhijeet Joglekar <abjoglek@cisco.com>
Date: Tue, 21 Apr 2009 16:26:52 -0700
Subject: [PATCH 0904/1421] [SCSI] libfc: Hold disc mutex while processing gpn
 ft resp

gpn_ft_resp processing currently does not hold the discovery lock.
disc_done() thus gets called from gpn_ft_resp or from gpn_ft_parse
without the lock held. This then sets disc->pending to zero or calls
gpn_ft_req() without disc_lock held.

- Hold disc mutex during gpn_ft resp processing
- In disc_done, release the disc mutex while calling lport callback

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_disc.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index e57556ea5b4..44806307f83 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -461,21 +461,29 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport)
 /**
  * fc_disc_done() - Discovery has been completed
  * @disc: FC discovery context
+ * Locking Note: This function expects that the disc mutex is locked before
+ * it is called. The discovery callback is then made with the lock released,
+ * and the lock is re-taken before returning from this function
  */
 static void fc_disc_done(struct fc_disc *disc)
 {
 	struct fc_lport *lport = disc->lport;
+	enum fc_disc_event event;
 
 	FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
 		      fc_host_port_id(lport->host));
 
-	disc->disc_callback(lport, disc->event);
+	event = disc->event;
 	disc->event = DISC_EV_NONE;
 
 	if (disc->requested)
 		fc_disc_gpn_ft_req(disc);
 	else
 		disc->pending = 0;
+
+	mutex_unlock(&disc->disc_mutex);
+	disc->disc_callback(lport, event);
+	mutex_lock(&disc->disc_mutex);
 }
 
 /**
@@ -681,8 +689,8 @@ static void fc_disc_timeout(struct work_struct *work)
  * @fp: response frame
  * @lp_arg: Fibre Channel host port instance
  *
- * Locking Note: This function expects that the disc_mutex is locked
- *		 before it is called.
+ * Locking Note: This function is called without disc mutex held, and
+ *		 should do all its processing with the mutex held
  */
 static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 				void *disc_arg)
@@ -695,11 +703,13 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 	unsigned int len;
 	int error;
 
+	mutex_lock(&disc->disc_mutex);
 	FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
 		      fc_host_port_id(disc->lport->host));
 
 	if (IS_ERR(fp)) {
 		fc_disc_error(disc, fp);
+		mutex_unlock(&disc->disc_mutex);
 		return;
 	}
 
@@ -744,6 +754,8 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 			disc->seq_count++;
 	}
 	fc_frame_free(fp);
+
+	mutex_unlock(&disc->disc_mutex);
 }
 
 /**
-- 
GitLab


From 76f6804e7e7bb836cbdf4a73fe6c5485e4cc04c2 Mon Sep 17 00:00:00 2001
From: Abhijeet Joglekar <abjoglek@cisco.com>
Date: Tue, 21 Apr 2009 16:26:58 -0700
Subject: [PATCH 0905/1421] [SCSI] libfc: Do not retry if the new state is not
 the same as old state

For instance, if there is a Plogi pending (remote port is in Plogi state),
and the state changes to say NONE (because the port is being logged off),
then when the Plogi resp times out, do not start a retry.

This patch partially reverts an earlier patch (libfc: check for err when
recv and state is incorrect), by moving the state check back to before
checking for error. However, if the state does not match, then there is
an additional check to see if its an error ptr or a real frame before
jumping to err or out respectively.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_lport.c | 60 ++++++++++++++++++++---------------
 drivers/scsi/libfc/fc_rport.c | 48 ++++++++++++++++------------
 2 files changed, 63 insertions(+), 45 deletions(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index b8178ef398d..52c4f2dfcfd 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1032,17 +1032,19 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a RFT_ID response\n");
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	if (lport->state != LPORT_ST_RFT_ID) {
 		FC_DBG("Received a RFT_ID response, but in state %s\n",
 		       fc_lport_state(lport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	fh = fc_frame_header_get(fp);
 	ct = fc_frame_payload_get(fp, sizeof(*ct));
 
@@ -1084,17 +1086,19 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a RPN_ID response\n");
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	if (lport->state != LPORT_ST_RPN_ID) {
 		FC_DBG("Received a RPN_ID response, but in state %s\n",
 		       fc_lport_state(lport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	fh = fc_frame_header_get(fp);
 	ct = fc_frame_payload_get(fp, sizeof(*ct));
 	if (fh && ct && fh->fh_type == FC_TYPE_CT &&
@@ -1134,17 +1138,19 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a SCR response\n");
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	if (lport->state != LPORT_ST_SCR) {
 		FC_DBG("Received a SCR response, but in state %s\n",
 		       fc_lport_state(lport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC)
 		fc_lport_enter_ready(lport);
@@ -1360,17 +1366,19 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a LOGO response\n");
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	if (lport->state != LPORT_ST_LOGO) {
 		FC_DBG("Received a LOGO response, but in state %s\n",
 		       fc_lport_state(lport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC)
 		fc_lport_enter_reset(lport);
@@ -1444,17 +1452,19 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	FC_DEBUG_LPORT("Received a FLOGI response\n");
 
-	if (IS_ERR(fp)) {
-		fc_lport_error(lport, fp);
-		goto err;
-	}
-
 	if (lport->state != LPORT_ST_FLOGI) {
 		FC_DBG("Received a FLOGI response, but in state %s\n",
 		       fc_lport_state(lport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
 	fh = fc_frame_header_get(fp);
 	did = ntoh24(fh->fh_d_id);
 	if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 0472bb73221..eef70b4b7b9 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -505,17 +505,19 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
 		       rport->port_id);
 
-	if (IS_ERR(fp)) {
-		fc_rport_error_retry(rport, fp);
-		goto err;
-	}
-
 	if (rdata->rp_state != RPORT_ST_PLOGI) {
 		FC_DBG("Received a PLOGI response, but in state %s\n",
 		       fc_rport_state(rport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_rport_error_retry(rport, fp);
+		goto err;
+	}
+
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC &&
 	    (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
@@ -614,17 +616,19 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
 		       rport->port_id);
 
-	if (IS_ERR(fp)) {
-		fc_rport_error_retry(rport, fp);
-		goto err;
-	}
-
 	if (rdata->rp_state != RPORT_ST_PRLI) {
 		FC_DBG("Received a PRLI response, but in state %s\n",
 		       fc_rport_state(rport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_rport_error_retry(rport, fp);
+		goto err;
+	}
+
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC) {
 		pp = fc_frame_payload_get(fp, sizeof(*pp));
@@ -678,17 +682,19 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
 		       rport->port_id);
 
-	if (IS_ERR(fp)) {
-		fc_rport_error_retry(rport, fp);
-		goto err;
-	}
-
 	if (rdata->rp_state != RPORT_ST_LOGO) {
 		FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
 			       fc_rport_state(rport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_rport_error_retry(rport, fp);
+		goto err;
+	}
+
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC) {
 		fc_rport_enter_rtv(rport);
@@ -764,17 +770,19 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
 		       rport->port_id);
 
-	if (IS_ERR(fp)) {
-		fc_rport_error(rport, fp);
-		goto err;
-	}
-
 	if (rdata->rp_state != RPORT_ST_RTV) {
 		FC_DBG("Received a RTV response, but in state %s\n",
 		       fc_rport_state(rport));
+		if (IS_ERR(fp))
+			goto err;
 		goto out;
 	}
 
+	if (IS_ERR(fp)) {
+		fc_rport_error(rport, fp);
+		goto err;
+	}
+
 	op = fc_frame_payload_op(fp);
 	if (op == ELS_LS_ACC) {
 		struct fc_els_rtv_acc *rtv;
-- 
GitLab


From b4c6f54632ad664a3d9e7f05e4ea0f1803e32755 Mon Sep 17 00:00:00 2001
From: Abhijeet Joglekar <abjoglek@cisco.com>
Date: Tue, 21 Apr 2009 16:27:04 -0700
Subject: [PATCH 0906/1421] [SCSI] libfc: Track rogue remote ports

Rogue ports are currently not tracked on any list. The only reference
to them is through any outstanding exchanges pending on the rogue ports.
If the module is removed while a retry is set on a rogue port
(say a Plogi retry for instance), this retry is not cancelled because there
is no reference to the rogue port in the discovery rports list. Thus the
local port can clean itself up, delete the exchange pool, and then the
rogue port timeout can fire and try to start up another exchange.

This patch tracks the rogue ports in a new list disc->rogue_rports. Creating
a new list instead of using the disc->rports list keeps remote port code
change to a minimum.

1)  Whenever a rogue port is created, it is immediately added to the
disc->rogue_rports list.

2) When the rogues port goes to ready, it is removed from the rogue list
and the real remote port is added to the disc->rports list

3) The removal of the rogue from the disc->rogue_rports list is done in
the context of the fc_rport_work() workQ thread in discovery callback.

4) Real rports are removed from the disc->rports list like before. Lookup
is done only in the real rports list. This avoids making large changes
to the remote port code.

5) In fc_disc_stop_rports, the rogues list is traversed in addition to the
real list to stop the rogue ports and issue logoffs on them. This way, rogue
ports get cleaned up when the local port goes away.

6) rogue remote ports are not removed from the list right away, but
removed late in fc_rport_work() context, multiple threads can find the same
remote port in the list and call rport_logoff(). Rport_logoff() only
continues with the logoff if port is not in NONE state, thus preventing
multiple logoffs and multiple list deletions.

7) Since the rport is removed from the disc list at a later stage
(in the disc callback), incoming frames can find the rport even if
rport_logoff() has been called on the rport. When rport_logoff() is called,
the rport state is set to NONE, and we are trying to cancel all exchanges
and retries on that port. While in this state, if an incoming
Plogi/Prli/Logo or other frames match the rport, we should not reply
because the rport is in the NONE state. Just drop the frame, since the
rport will be deleted soon in the disc callback (fc_rport_work)

8)  In fc_disc_single(), remove rport lookup and call to fc_disc_del_target.
fc_disc_single() is called from recv_rscn_req() where rport lookup
and rport_logoff is already done.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_disc.c  | 36 ++++++++++++++++++++++++-----------
 drivers/scsi/libfc/fc_rport.c | 28 +++++++++++++++++++++++++++
 include/scsi/libfc.h          |  1 +
 3 files changed, 54 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 44806307f83..4c880656990 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -113,6 +113,11 @@ void fc_disc_stop_rports(struct fc_disc *disc)
 		lport->tt.rport_logoff(rport);
 	}
 
+	list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) {
+		rport = PRIV_TO_RPORT(rdata);
+		lport->tt.rport_logoff(rport);
+	}
+
 	mutex_unlock(&disc->disc_mutex);
 }
 
@@ -131,23 +136,32 @@ static void fc_disc_rport_callback(struct fc_lport *lport,
 {
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 	struct fc_disc *disc = &lport->disc;
-	int found = 0;
 
 	FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
 		      rport->port_id);
 
-	if (event == RPORT_EV_CREATED) {
+	switch (event) {
+	case RPORT_EV_CREATED:
 		if (disc) {
-			found = 1;
 			mutex_lock(&disc->disc_mutex);
 			list_add_tail(&rdata->peers, &disc->rports);
 			mutex_unlock(&disc->disc_mutex);
 		}
+		break;
+	case RPORT_EV_LOGO:
+	case RPORT_EV_FAILED:
+	case RPORT_EV_STOP:
+		mutex_lock(&disc->disc_mutex);
+		mutex_lock(&rdata->rp_mutex);
+		if (rdata->trans_state == FC_PORTSTATE_ROGUE)
+			list_del(&rdata->peers);
+		mutex_unlock(&rdata->rp_mutex);
+		mutex_unlock(&disc->disc_mutex);
+		break;
+	default:
+		break;
 	}
 
-	if (!found)
-		FC_DEBUG_DISC("The rport (%6x) is not maintained "
-			      "by the discovery layer\n", rport->port_id);
 }
 
 /**
@@ -439,6 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc,
 			rdata = rport->dd_data;
 			rdata->ops = &fc_disc_rport_ops;
 			rdata->rp_state = RPORT_ST_INIT;
+			list_add_tail(&rdata->peers, &disc->rogue_rports);
 			lport->tt.rport_login(rport);
 		}
 	}
@@ -630,6 +645,8 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len)
 				rdata = rport->dd_data;
 				rdata->ops = &fc_disc_rport_ops;
 				rdata->local_port = lport;
+				list_add_tail(&rdata->peers,
+					      &disc->rogue_rports);
 				lport->tt.rport_login(rport);
 			} else
 				FC_DBG("Failed to allocate memory for "
@@ -769,7 +786,6 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
 static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
 {
 	struct fc_lport *lport;
-	struct fc_rport *rport;
 	struct fc_rport *new_rport;
 	struct fc_rport_libfc_priv *rdata;
 
@@ -778,15 +794,12 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
 	if (dp->ids.port_id == fc_host_port_id(lport->host))
 		goto out;
 
-	rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
-	if (rport)
-		fc_disc_del_target(disc, rport);
-
 	new_rport = lport->tt.rport_create(dp);
 	if (new_rport) {
 		rdata = new_rport->dd_data;
 		rdata->ops = &fc_disc_rport_ops;
 		kfree(dp);
+		list_add_tail(&rdata->peers, &disc->rogue_rports);
 		lport->tt.rport_login(new_rport);
 	}
 	return;
@@ -848,6 +861,7 @@ int fc_disc_init(struct fc_lport *lport)
 	INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
 	mutex_init(&disc->disc_mutex);
 	INIT_LIST_HEAD(&disc->rports);
+	INIT_LIST_HEAD(&disc->rogue_rports);
 
 	disc->lport = lport;
 	disc->delay = FC_DISC_DELAY;
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index eef70b4b7b9..5bf7a949f05 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -267,6 +267,10 @@ static void fc_rport_work(struct work_struct *work)
 			       "(%6x).\n", ids.port_id);
 			event = RPORT_EV_FAILED;
 		}
+		if (rport->port_id != FC_FID_DIR_SERV)
+			if (rport_ops->event_callback)
+				rport_ops->event_callback(lport, rport,
+							  RPORT_EV_FAILED);
 		put_device(&rport->dev);
 		rport = new_rport;
 		rdata = new_rport->dd_data;
@@ -325,11 +329,20 @@ int fc_rport_login(struct fc_rport *rport)
 int fc_rport_logoff(struct fc_rport *rport)
 {
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
+	struct fc_lport *lport = rdata->local_port;
 
 	mutex_lock(&rdata->rp_mutex);
 
 	FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
 
+	if (rdata->rp_state == RPORT_ST_NONE) {
+		FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
+			       " not removing", fc_host_port_id(lport->host),
+			       rport->port_id);
+		mutex_unlock(&rdata->rp_mutex);
+		goto out;
+	}
+
 	fc_rport_enter_logo(rport);
 
 	/*
@@ -349,6 +362,7 @@ int fc_rport_logoff(struct fc_rport *rport)
 
 	mutex_unlock(&rdata->rp_mutex);
 
+out:
 	return 0;
 }
 
@@ -1015,6 +1029,8 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport,
 	default:
 		FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
 			       "state %d\n", sid, rdata->rp_state);
+		fc_frame_free(fp);
+		return;
 		break;
 	}
 
@@ -1106,6 +1122,8 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport,
 		reason = ELS_RJT_NONE;
 		break;
 	default:
+		fc_frame_free(rx_fp);
+		return;
 		break;
 	}
 	len = fr_len(rx_fp) - sizeof(*fh);
@@ -1235,6 +1253,11 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp,
 		       "while in state %s\n", ntoh24(fh->fh_s_id),
 		       fc_rport_state(rport));
 
+	if (rdata->rp_state == RPORT_ST_NONE) {
+		fc_frame_free(fp);
+		return;
+	}
+
 	rjt_data.fp = NULL;
 	rjt_data.reason = ELS_RJT_UNAB;
 	rjt_data.explan = ELS_EXPL_NONE;
@@ -1264,6 +1287,11 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp,
 		       "while in state %s\n", ntoh24(fh->fh_s_id),
 		       fc_rport_state(rport));
 
+	if (rdata->rp_state == RPORT_ST_NONE) {
+		fc_frame_free(fp);
+		return;
+	}
+
 	rdata->event = RPORT_EV_LOGO;
 	queue_work(rport_event_queue, &rdata->event_work);
 
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 0303a6a098c..45f9cc642c4 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -637,6 +637,7 @@ struct fc_disc {
 			      enum fc_disc_event);
 
 	struct list_head	 rports;
+	struct list_head	 rogue_rports;
 	struct fc_lport		*lport;
 	struct mutex		disc_mutex;
 	struct fc_gpn_ft_resp	partial_buf;	/* partial name buffer */
-- 
GitLab


From a0fd2e49ec75bf74d3d202df51dfe65ad4c32605 Mon Sep 17 00:00:00 2001
From: Abhijeet Joglekar <abjoglek@cisco.com>
Date: Tue, 21 Apr 2009 16:27:09 -0700
Subject: [PATCH 0907/1421] [SCSI] libfc: During fabric logoff, flush the rport
 Q after logging off dns port

We want to generate the rport queue event (from the logoff)
before flushing the queue otherwise the event may still be
in the queue when we logoff.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_lport.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 52c4f2dfcfd..4cd953378c5 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -618,6 +618,11 @@ int fc_fabric_logoff(struct fc_lport *lport)
 {
 	lport->tt.disc_stop_final(lport);
 	mutex_lock(&lport->lp_mutex);
+	if (lport->dns_rp)
+		lport->tt.rport_logoff(lport->dns_rp);
+	mutex_unlock(&lport->lp_mutex);
+	lport->tt.rport_flush_queue();
+	mutex_lock(&lport->lp_mutex);
 	fc_lport_enter_logo(lport);
 	mutex_unlock(&lport->lp_mutex);
 	cancel_delayed_work_sync(&lport->retry_work);
@@ -1408,10 +1413,6 @@ static void fc_lport_enter_logo(struct fc_lport *lport)
 
 	fc_lport_state_enter(lport, LPORT_ST_LOGO);
 
-	/* DNS session should be closed so we can release it here */
-	if (lport->dns_rp)
-		lport->tt.rport_logoff(lport->dns_rp);
-
 	fp = fc_frame_alloc(lport, sizeof(*logo));
 	if (!fp) {
 		fc_lport_error(lport, fp);
-- 
GitLab


From bbf156697a6332f9074e2b275a9157d99a431398 Mon Sep 17 00:00:00 2001
From: Abhijeet Joglekar <abjoglek@cisco.com>
Date: Tue, 21 Apr 2009 16:27:14 -0700
Subject: [PATCH 0908/1421] [SCSI] libfc: Change state to NONE in
 fc_lport_destroy

After lport_destroy, the local port should not be used again. Transition
to state NONE, any incoming frames or link up should not transition out
of this state since we are deleting exchange table and cleaning up the
local port. Also, mark link as down.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_lport.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 4cd953378c5..e0c247724d2 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -644,7 +644,12 @@ EXPORT_SYMBOL(fc_fabric_logoff);
  */
 int fc_lport_destroy(struct fc_lport *lport)
 {
+	mutex_lock(&lport->lp_mutex);
+	lport->state = LPORT_ST_NONE;
+	lport->link_up = 0;
 	lport->tt.frame_send = fc_frame_drop;
+	mutex_unlock(&lport->lp_mutex);
+
 	lport->tt.fcp_abort_io(lport);
 	lport->tt.exch_mgr_reset(lport, 0, 0);
 	return 0;
-- 
GitLab


From 55c7a60cf0c9113cb52d2b87abb120e951bdb332 Mon Sep 17 00:00:00 2001
From: Abhijeet Joglekar <abjoglek@cisco.com>
Date: Tue, 21 Apr 2009 16:27:19 -0700
Subject: [PATCH 0909/1421] [SCSI] libfc: whenever queueing delete ev for
 rport, set state to NONE

When a delete event is queued for an rport, set state to NONE so that no
other processing is done on the rport as it is being removed.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_rport.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 5bf7a949f05..e675f5ac30c 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -444,6 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
 	case RPORT_ST_PRLI:
 	case RPORT_ST_LOGO:
 		rdata->event = RPORT_EV_FAILED;
+		fc_rport_state_enter(rport, RPORT_ST_NONE);
 		queue_work(rport_event_queue,
 			   &rdata->event_work);
 		break;
@@ -664,6 +665,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 	} else {
 		FC_DBG("Bad ELS response\n");
 		rdata->event = RPORT_EV_FAILED;
+		fc_rport_state_enter(rport, RPORT_ST_NONE);
 		queue_work(rport_event_queue, &rdata->event_work);
 	}
 
@@ -715,6 +717,7 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 	} else {
 		FC_DBG("Bad ELS response\n");
 		rdata->event = RPORT_EV_LOGO;
+		fc_rport_state_enter(rport, RPORT_ST_NONE);
 		queue_work(rport_event_queue, &rdata->event_work);
 	}
 
@@ -1293,6 +1296,7 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp,
 	}
 
 	rdata->event = RPORT_EV_LOGO;
+	fc_rport_state_enter(rport, RPORT_ST_NONE);
 	queue_work(rport_event_queue, &rdata->event_work);
 
 	lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
-- 
GitLab


From 3caf02ee280a171074476d346d01dc0f5e05b22c Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 21 Apr 2009 16:27:25 -0700
Subject: [PATCH 0910/1421] [SCSI] fcoe: kfree() -> kfree_skb()

sk_buff pointers should use kfree_skb() instead of vanilla kfree().

Found by smatch (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/fcoe/fcoe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 94e1e318977..13a0a6fdefc 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -1011,7 +1011,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 	wlen = skb->len / FCOE_WORD_TO_BYTE;
 
 	if (!lp->link_up) {
-		kfree(skb);
+		kfree_skb(skb);
 		return 0;
 	}
 
-- 
GitLab


From fc224a5bc949aa30df572e990201c8f95767658f Mon Sep 17 00:00:00 2001
From: Chris Leech <christopher.leech@intel.com>
Date: Tue, 21 Apr 2009 16:27:30 -0700
Subject: [PATCH 0911/1421] [SCSI] fcoe: don't export functions that are
 internal to fcoe

These probably never should have been exported.
If they were needed outside of the fcoe module, they
would have been moved to libfcoe.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/fcoe/fcoe.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 13a0a6fdefc..7bd0e822459 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -884,7 +884,6 @@ err2:
 	kfree_skb(skb);
 	return -1;
 }
-EXPORT_SYMBOL_GPL(fcoe_rcv);
 
 /**
  * fcoe_start_io() - pass to netdev to start xmit for fcoe
@@ -1123,7 +1122,6 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(fcoe_xmit);
 
 /**
  * fcoe_percpu_receive_thread() - recv thread per cpu
@@ -1652,7 +1650,6 @@ int fcoe_link_ok(struct fc_lport *lp)
 
 	return rc;
 }
-EXPORT_SYMBOL_GPL(fcoe_link_ok);
 
 /**
  * fcoe_percpu_clean() - Clear the pending skbs for an lport
@@ -1684,7 +1681,6 @@ void fcoe_percpu_clean(struct fc_lport *lp)
 		spin_unlock_bh(&pp->fcoe_rx_list.lock);
 	}
 }
-EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
 
 /**
  * fcoe_clean_pending_queue() - Dequeue a skb and free it
@@ -1705,7 +1701,6 @@ void fcoe_clean_pending_queue(struct fc_lport *lp)
 	}
 	spin_unlock_bh(&fc->fcoe_pending_queue.lock);
 }
-EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
 
 /**
  * fcoe_reset() - Resets the fcoe
@@ -1719,7 +1714,6 @@ int fcoe_reset(struct Scsi_Host *shost)
 	fc_lport_reset(lport);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(fcoe_reset);
 
 /**
  * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
@@ -1757,7 +1751,6 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev)
 
 	return (fc) ? fc->ctlr.lp : NULL;
 }
-EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
 
 /**
  * fcoe_hostlist_add() - Add a lport to lports list
@@ -1778,7 +1771,6 @@ int fcoe_hostlist_add(const struct fc_lport *lp)
 	}
 	return 0;
 }
-EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
 
 /**
  * fcoe_hostlist_remove() - remove a lport from lports list
@@ -1798,7 +1790,6 @@ int fcoe_hostlist_remove(const struct fc_lport *lp)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
 
 /**
  * fcoe_init() - fcoe module loading initialization
-- 
GitLab


From dd3fd72e692c8af007f70df4433c0cffe8582d8b Mon Sep 17 00:00:00 2001
From: Chris Leech <christopher.leech@intel.com>
Date: Tue, 21 Apr 2009 16:27:36 -0700
Subject: [PATCH 0912/1421] [SCSI] fcoe: fix spelling typos and bad comments

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/fcoe/fcoe.c    | 47 ++++++++++++++++---------------------
 drivers/scsi/fcoe/libfcoe.c |  2 +-
 2 files changed, 21 insertions(+), 28 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 7bd0e822459..8ad12655624 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -57,7 +57,7 @@ DEFINE_RWLOCK(fcoe_hostlist_lock);
 DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
 DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
 
-/* Function Prototyes */
+/* Function Prototypes */
 static int fcoe_reset(struct Scsi_Host *shost);
 static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
 static int fcoe_rcv(struct sk_buff *, struct net_device *,
@@ -138,7 +138,6 @@ static struct scsi_host_template fcoe_shost_template = {
 /**
  * fcoe_lport_config() - sets up the fc_lport
  * @lp: ptr to the fc_lport
- * @shost: ptr to the parent scsi host
  *
  * Returns: 0 for success
  */
@@ -380,7 +379,7 @@ static int fcoe_if_destroy(struct net_device *netdev)
 	dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
 	rtnl_unlock();
 
-	/* Free the per-CPU revieve threads */
+	/* Free the per-CPU receive threads */
 	fcoe_percpu_clean(lp);
 
 	/* Free existing skbs */
@@ -720,7 +719,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu)
 	}
 #else
 	/*
-	 * This a non-SMP scenario where the singluar Rx thread is
+	 * This a non-SMP scenario where the singular Rx thread is
 	 * being removed. Free all skbs and stop the thread.
 	 */
 	spin_lock_bh(&p->fcoe_rx_list.lock);
@@ -777,7 +776,7 @@ static struct notifier_block fcoe_cpu_notifier = {
  * @skb: the receive skb
  * @dev: associated net device
  * @ptype: context
- * @odldev: last device
+ * @olddev: last device
  *
  * this function will receive the packet and build fc frame and pass it up
  *
@@ -904,7 +903,7 @@ static inline int fcoe_start_io(struct sk_buff *skb)
 }
 
 /**
- * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof
  * @skb: the skb to be xmitted
  * @tlen: total len
  *
@@ -946,7 +945,7 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
 
 /**
  * fcoe_fc_crc() - calculates FC CRC in this fcoe skb
- * @fp: the fc_frame containg data to be checksummed
+ * @fp: the fc_frame containing data to be checksummed
  *
  * This uses crc32() to calculate the crc for fc frame
  * Return   : 32 bit crc
@@ -1061,7 +1060,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
 		cp = NULL;
 	}
 
-	/* adjust skb netowrk/transport offsets to match mac/fcoe/fc */
+	/* adjust skb network/transport offsets to match mac/fcoe/fc */
 	skb_push(skb, elen + hlen);
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
@@ -1294,17 +1293,16 @@ void fcoe_watchdog(ulong vp)
 
 
 /**
- * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
+ * fcoe_check_wait_queue() - attempt to clear the transmit backlog
+ * @lp: the fc_lport
  *
  * This empties the wait_queue, dequeue the head of the wait_queue queue
  * and calls fcoe_start_io() for each packet, if all skb have been
  * transmitted, return qlen or -1 if a error occurs, then restore
- * wait_queue and  try again later.
+ * wait_queue and try again later.
  *
  * The wait_queue is used when the skb transmit fails. skb will go
- * in the wait_queue which will be emptied by the time function OR
+ * in the wait_queue which will be emptied by the timer function or
  * by the next skb transmit.
  *
  * Returns: 0 for success
@@ -1353,10 +1351,6 @@ out:
  */
 static void fcoe_dev_setup()
 {
-	/*
-	 * here setup a interface specific wd time to
-	 * monitor the link state
-	 */
 	register_netdevice_notifier(&fcoe_notifier);
 }
 
@@ -1435,10 +1429,9 @@ out:
 
 /**
  * fcoe_if_to_netdev() - parse a name buffer to get netdev
- * @ifname: fixed array for output parsed ifname
  * @buffer: incoming buffer to be copied
  *
- * Returns: NULL or ptr to netdeive
+ * Returns: NULL or ptr to net_device
  */
 static struct net_device *fcoe_if_to_netdev(const char *buffer)
 {
@@ -1456,7 +1449,7 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer)
 }
 
 /**
- * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev
  * @netdev: the target netdev
  *
  * Returns: ptr to the struct module, NULL for failure
@@ -1486,7 +1479,7 @@ fcoe_netdev_to_module_owner(const struct net_device *netdev)
  * Holds the Ethernet driver module by try_module_get() for
  * the corresponding netdev.
  *
- * Returns: 0 for succsss
+ * Returns: 0 for success
  */
 static int fcoe_ethdrv_get(const struct net_device *netdev)
 {
@@ -1508,7 +1501,7 @@ static int fcoe_ethdrv_get(const struct net_device *netdev)
  * Releases the Ethernet driver module by module_put for
  * the corresponding netdev.
  *
- * Returns: 0 for succsss
+ * Returns: 0 for success
  */
 static int fcoe_ethdrv_put(const struct net_device *netdev)
 {
@@ -1526,7 +1519,7 @@ static int fcoe_ethdrv_put(const struct net_device *netdev)
 
 /**
  * fcoe_destroy() - handles the destroy from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
  * @kp: associated kernel param
  *
  * Returns: 0 for success
@@ -1563,7 +1556,7 @@ out_nodev:
 
 /**
  * fcoe_create() - Handles the create call from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
  * @kp: associated kernel param
  *
  * Returns: 0 for success
@@ -1717,7 +1710,7 @@ int fcoe_reset(struct Scsi_Host *shost)
 
 /**
  * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
- * @device: this is currently ptr to net_device
+ * @dev: this is currently ptr to net_device
  *
  * Returns: NULL or the located fcoe_softc
  */
@@ -1754,7 +1747,7 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev)
 
 /**
  * fcoe_hostlist_add() - Add a lport to lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be added
  *
  * Returns: 0 for success
  */
@@ -1774,7 +1767,7 @@ int fcoe_hostlist_add(const struct fc_lport *lp)
 
 /**
  * fcoe_hostlist_remove() - remove a lport from lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be removed
  *
  * Returns: 0 for success
  */
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index f410f4abb54..62ba0f39c6b 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -122,7 +122,7 @@ static void fcoe_ctlr_reset_fcfs(struct fcoe_ctlr *fip)
 }
 
 /**
- * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller.
+ * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller.
  * @fip:	FCoE controller.
  *
  * This is called by FCoE drivers before freeing the &fcoe_ctlr.
-- 
GitLab


From a29e7646f42a325a7f6cce34adbeb52e8db15566 Mon Sep 17 00:00:00 2001
From: Robert Love <robert.w.love@intel.com>
Date: Tue, 21 Apr 2009 16:27:41 -0700
Subject: [PATCH 0913/1421] [SCSI] libfc: Fix compilation warnings with
 allmodconfig

When building with a .config generated from 'make allmodconfig'
some build warnings are generated. This patch corrects the warnings,
adds a FC_FID_NONE (= 0) enumeration for FC-IDs and cleans up one
variable naming to meet our variable naming conventions. For example,
fc_lport's should be named "lport," not "lp."

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/libfc/fc_elsct.c | 2 +-
 drivers/scsi/libfc/fc_fcp.c   | 7 +++----
 drivers/scsi/libfc/fc_rport.c | 2 +-
 include/scsi/fc/fc_fs.h       | 1 +
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c
index dd47fe619d1..5878b34bff1 100644
--- a/drivers/scsi/libfc/fc_elsct.c
+++ b/drivers/scsi/libfc/fc_elsct.c
@@ -41,7 +41,7 @@ static struct fc_seq *fc_elsct_send(struct fc_lport *lport,
 				    void *arg, u32 timer_msec)
 {
 	enum fc_rctl r_ctl;
-	u32 did;
+	u32 did = FC_FID_NONE;
 	enum fc_fh_type fh_type;
 	int rc;
 
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index f555ae99ad4..521f996f9b1 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -713,7 +713,7 @@ done:
 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 {
 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
-	struct fc_lport *lp;
+	struct fc_lport *lport = fsp->lp;
 	struct fc_frame_header *fh;
 	struct fcp_txrdy *dd;
 	u8 r_ctl;
@@ -724,9 +724,8 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 
 	fh = fc_frame_header_get(fp);
 	r_ctl = fh->fh_r_ctl;
-	lp = fsp->lp;
 
-	if (!(lp->state & LPORT_ST_READY))
+	if (!(lport->state & LPORT_ST_READY))
 		goto out;
 	if (fc_fcp_lock_pkt(fsp))
 		goto out;
@@ -779,7 +778,7 @@ errout:
 	if (IS_ERR(fp))
 		fc_fcp_error(fsp, fp);
 	else if (rc == -ENOMEM)
-		fc_fcp_reduce_can_queue(lp);
+		fc_fcp_reduce_can_queue(lport);
 }
 
 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index e675f5ac30c..747d73c5c8a 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -509,7 +509,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	struct fc_rport *rport = rp_arg;
 	struct fc_rport_libfc_priv *rdata = rport->dd_data;
 	struct fc_lport *lport = rdata->local_port;
-	struct fc_els_flogi *plp;
+	struct fc_els_flogi *plp = NULL;
 	unsigned int tov;
 	u16 csp_seq;
 	u16 cssp_seq;
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
index 1b7af3a64c7..ac4cd38c860 100644
--- a/include/scsi/fc/fc_fs.h
+++ b/include/scsi/fc/fc_fs.h
@@ -149,6 +149,7 @@ enum fc_rctl {
  * Well-known fabric addresses.
  */
 enum fc_well_known_fid {
+	FC_FID_NONE =           0x000000,       /* No destination */
 	FC_FID_BCAST =		0xffffff,	/* broadcast */
 	FC_FID_FLOGI =		0xfffffe,	/* fabric login */
 	FC_FID_FCTRL =		0xfffffd,	/* fabric controller */
-- 
GitLab


From 6401bdcad536cc00589c38e7e1c140d3acc00087 Mon Sep 17 00:00:00 2001
From: Joe Eykholt <jeykholt@cisco.com>
Date: Tue, 21 Apr 2009 16:27:46 -0700
Subject: [PATCH 0914/1421] [SCSI] fcoe: fip: add multicast filter to receive
 FIP advertisements.

The FCoE forwarder (FCF) would be selected, but then would soon time
out after three advertisements were missed.  This would be 24 seconds
by default, or 3 times the keep-alive interval configured on the switch.

The cause was that the multicast address for all FIP E-nodes
was never added.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/fcoe/fcoe.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 8ad12655624..03e1926f40b 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -255,6 +255,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	rtnl_lock();
 	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
 	dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+	dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
 	rtnl_unlock();
 
 	/*
-- 
GitLab


From dd406ef8950e76b17d74c5764a1e3d3a87d4a855 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Wed, 22 Apr 2009 08:58:02 -0500
Subject: [PATCH 0915/1421] [SCSI] ipr: Fix sleeping function called with
 interrupts disabled

The ata_sas_slave_configure was changed such that it now allocates
some memory for a drain buffer for ATAPI devices. Fixup the ipr
driver such that we no longer make this call with interrupts disabled.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ipr.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index c09d77591f9..dd689ded860 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3654,6 +3654,7 @@ static int ipr_slave_configure(struct scsi_device *sdev)
 {
 	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
 	struct ipr_resource_entry *res;
+	struct ata_port *ap = NULL;
 	unsigned long lock_flags = 0;
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
@@ -3672,12 +3673,16 @@ static int ipr_slave_configure(struct scsi_device *sdev)
 		}
 		if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
 			sdev->allow_restart = 1;
-		if (ipr_is_gata(res) && res->sata_port) {
+		if (ipr_is_gata(res) && res->sata_port)
+			ap = res->sata_port->ap;
+		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+		if (ap) {
 			scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
-			ata_sas_slave_configure(sdev, res->sata_port->ap);
-		} else {
+			ata_sas_slave_configure(sdev, ap);
+		} else
 			scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
-		}
+		return 0;
 	}
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 	return 0;
-- 
GitLab


From 8f76d151b010980d137bfdc736d1d8f64b489165 Mon Sep 17 00:00:00 2001
From: Dave Hansen <dave@linux.vnet.ibm.com>
Date: Tue, 21 Apr 2009 16:43:27 -0700
Subject: [PATCH 0916/1421] [SCSI] fix sign extension with 1.5TB usb-storage
 LBD=y

Shifting an unsigned char implicitly casts it to a signed int.  This
caused 'lba' to sign-extend and Linux would then try READ CAPACITY 16
which was not supported by at least one drive.  Using the
get_unaligned_be*() helpers keeps us from having to worry about how the
extension might occur.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sd.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3fcb64b91c4..84044233b63 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -50,6 +50,7 @@
 #include <linux/string_helpers.h>
 #include <linux/async.h>
 #include <asm/uaccess.h>
+#include <asm/unaligned.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -1344,12 +1345,8 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		return -EINVAL;
 	}
 
-	sector_size =	(buffer[8] << 24) | (buffer[9] << 16) |
-			(buffer[10] << 8) | buffer[11];
-	lba =  (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) |
-		((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) |
-		((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) |
-		((u64)buffer[6] << 8) | (u64)buffer[7]);
+	sector_size = get_unaligned_be32(&buffer[8]);
+	lba = get_unaligned_be64(&buffer[0]);
 
 	sd_read_protection_type(sdkp, buffer);
 
@@ -1400,10 +1397,8 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		return -EINVAL;
 	}
 
-	sector_size =	(buffer[4] << 24) | (buffer[5] << 16) |
-			(buffer[6] << 8) | buffer[7];
-	lba =	(buffer[0] << 24) | (buffer[1] << 16) |
-		(buffer[2] << 8) | buffer[3];
+	sector_size = get_unaligned_be32(&buffer[4]);
+	lba = get_unaligned_be32(&buffer[0]);
 
 	if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
 		sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
-- 
GitLab


From fd01825c70006638dee16f48c810c20c54f6cd15 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:37:20 -0600
Subject: [PATCH 0917/1421] [SCSI] mpt2sas : unique ioctl magic number

The current magic number is shared with mptsas driver. This to be unique to
fix issues with register_ioctls32_conversion in older kernels.  We are making
this change across all versions of the sas2.0 drivers.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_ctl.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index dbb6c0cf888..5bd7d4cfa81 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -50,7 +50,7 @@
 #endif
 
 #define MPT2SAS_DEV_NAME	"mpt2ctl"
-#define MPT2_MAGIC_NUMBER	'm'
+#define MPT2_MAGIC_NUMBER	'L'
 #define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
 
 /**
-- 
GitLab


From 03ea1115506c53b46cec2177deb189d186bb80dd Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:37:57 -0600
Subject: [PATCH 0918/1421] [SCSI] mpt2sas : the sanity check in base_interrupt
 needs to be on dword boundary

The poison sanity check on the reply_post_free register needs to be by 32bit,
not 64bit. The poison check is there because its possible that the driver read
the 1st 32bit before the 2nd 32bit has been written to by firmware.  In other
words, this handles race between driver reading the 64 bit register, and it
being dma'd across pci memory from controller firmware as two 32bit pci writes.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index a91f5143cea..12ecffbf518 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -636,6 +636,14 @@ _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
 static irqreturn_t
 _base_interrupt(int irq, void *bus_id)
 {
+	union reply_descriptor {
+		u64 word;
+		struct {
+			u32 low;
+			u32 high;
+		} u;
+	};
+	union reply_descriptor rd;
 	u32 post_index, post_index_next, completed_cmds;
 	u8 request_desript_type;
 	u16 smid;
@@ -656,7 +664,8 @@ _base_interrupt(int irq, void *bus_id)
 
 	completed_cmds = 0;
 	do {
-		if (ioc->reply_post_free[post_index].Words == ~0ULL)
+		rd.word = ioc->reply_post_free[post_index].Words;
+		if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
 			goto out;
 		reply = 0;
 		cb_idx = 0xFF;
@@ -721,7 +730,7 @@ _base_interrupt(int irq, void *bus_id)
 	for (i = 0 ; i < completed_cmds; i++) {
 		post_index = post_index_next;
 		/* poison the reply post descriptor */
-		ioc->reply_post_free[post_index_next].Words = ~0ULL;
+		ioc->reply_post_free[post_index_next].Words = ULLONG_MAX;
 		post_index_next = (post_index ==
 		    (ioc->reply_post_queue_depth - 1))
 		    ? 0 : post_index + 1;
@@ -3068,7 +3077,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 
 	/* initialize Reply Post Free Queue */
 	for (i = 0; i < ioc->reply_post_queue_depth; i++)
-		ioc->reply_post_free[i].Words = ~0ULL;
+		ioc->reply_post_free[i].Words = ULLONG_MAX;
 
 	r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
 	if (r)
-- 
GitLab


From 0d04df9b4a83c50ebe2143f20c2d5469c83ba314 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:38:43 -0600
Subject: [PATCH 0919/1421] [SCSI] mpt2sas : fix oops when firmware sends large
 sense buffer size

There is a bug in firmware where the reply message frame says there is a
16kb sense buffer, when in reality its only 20 bytes.  This fix insures
the memcpy action doesn't corrupte the memory beyond the 90 bytes allocated in
the scsi command for sense buffer.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 0c463c483c0..f2d967c5415 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2863,8 +2863,9 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
 		struct sense_info data;
 		const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
 		    smid);
-		memcpy(scmd->sense_buffer, sense_data,
+		u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
 		    le32_to_cpu(mpi_reply->SenseCount));
+		memcpy(scmd->sense_buffer, sense_data, sz);
 		_scsih_normalize_sense(scmd->sense_buffer, &data);
 		/* failure prediction threshold exceeded */
 		if (data.asc == 0x5D)
-- 
GitLab


From 77bdd9ee1e1d94fa853c354dcde881ddc5d277a5 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:39:24 -0600
Subject: [PATCH 0920/1421] [SCSI] mpt2sas : running out of message frames

The driver is not freeing message frame when returning failure from
_ctl_do_task_abort.   If you call this function 500 times when its unable
to find an active task mid, you end up with no message frames.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_ctl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 2d4f85c9d7a..e0eab0a9bc4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -714,8 +714,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 
 		if (tm_request->TaskType ==
 		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			if (_ctl_do_task_abort(ioc, &karg, tm_request))
+			if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+				mpt2sas_base_free_smid(ioc, smid);
 				goto out;
+			}
 		}
 
 		mutex_lock(&ioc->tm_cmds.mutex);
-- 
GitLab


From e5f9bb198aa47d06553b66cc5f24ded49ed0b70d Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:40:01 -0600
Subject: [PATCH 0921/1421] [SCSI] mpt2sas : driver name needs to be in the
 MPT2IOCINFO ioctl

The driver name needs to be at the beginining of the driver_version string in
MPT2IOCINFO ioctl.  This is the same behaviour is there already in the mptsas
driver.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_ctl.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index e0eab0a9bc4..2dc38598c20 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -917,9 +917,9 @@ _ctl_getiocinfo(void __user *arg)
 	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
 	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
 	karg.firmware_version = ioc->facts.FWVersion.Word;
-	strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION,
-	    MPT2_IOCTL_VERSION_LENGTH);
-	karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0';
+	strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
+	strcat(karg.driver_version, "-");
+	strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
 	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
 
 	if (copy_to_user(arg, &karg, sizeof(karg))) {
-- 
GitLab


From f0f9cc1fb8a21f3ff90900505fc82a43d29d0975 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:40:48 -0600
Subject: [PATCH 0922/1421] [SCSI] mpt2sas : Identify Dell series-7 adapters at
 driver load time

The Dell branding along with the VID, DID, SSVID, SSDID following the LSI
branding that contains the card firmware/chip/bios versions.  If the SSDID
is not known but it is a Dell HBA, the driver will print the SSDID instead
of the Dell branding string.  Nothing will be printed for non Dell HBAs

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c | 60 +++++++++++++++++++++++++++++
 drivers/scsi/mpt2sas/mpt2sas_base.h | 24 ++++++++++++
 2 files changed, 84 insertions(+)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 12ecffbf518..f3da592f7bc 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1395,6 +1395,64 @@ mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
 	    &ioc->scsi_lookup_lock);
 }
 
+/**
+ * _base_display_dell_branding - Disply branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+	char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
+
+	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
+		return;
+
+	memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
+	switch (ioc->pdev->subsystem_device) {
+	case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+		strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+		strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+		strncpy(dell_branding,
+		    MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+		strncpy(dell_branding,
+		    MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+		strncpy(dell_branding,
+		    MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	case MPT2SAS_DELL_PERC_H200_SSDID:
+		strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+		strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
+		    MPT2SAS_DELL_BRANDING_SIZE - 1);
+		break;
+	default:
+		sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
+		break;
+	}
+
+	printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
+	    " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
+	    ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
+	    ioc->pdev->subsystem_device);
+}
+
 /**
  * _base_display_ioc_capabilities - Disply IOC's capabilities.
  * @ioc: per adapter object
@@ -1436,6 +1494,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 		i++;
 	}
 
+	_base_display_dell_branding(ioc);
+
 	i = 0;
 	printk("), ");
 	printk("Capabilities=(");
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 6945ff4d382..b39a5d635af 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -129,6 +129,30 @@
 #define MPT2SAS_WARN_FMT		KERN_WARNING MPT2SAS_FMT
 #define MPT2SAS_ERR_FMT			KERN_ERR MPT2SAS_FMT
 
+/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE                 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING        "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING    "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING    "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING   "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING            "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING            "Dell 6Gbps SAS"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID           0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID       0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID    0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID       0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID      0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID               0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID               0x1F22
+
 /*
  * per target private data
  */
-- 
GitLab


From 8901cbb45e2a6657adf0e6eea4276ef452dee011 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:41:32 -0600
Subject: [PATCH 0923/1421] [SCSI] mpt2sas : Broadcast Primative AEN bug fix

Bug fix in the broadcast primative async event code where the driver would
stop sending tm queries after the first queury was completed. This was due
driver not reseting the tm_cmds.status field back to MPT2_CMD_NOT_USED after
completing a task management request.

An addtional fix adding sanity check to insure sas_device->starget set to NULL.
During multipath testing fail over/fail back, the mid layer was holding onto
sdev longer than the fail back period, thus starget was getting set to NULL
for device being added.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index f2d967c5415..4dffbec7935 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
 	handle = sas_device->handle;
 	parent_handle = sas_device->parent_handle;
 	sas_address = sas_device->sas_address;
-	if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+	if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
 		_scsih_sas_device_remove(ioc, sas_device);
-	} else if (!sas_device->starget) {
-		mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
-		_scsih_sas_device_remove(ioc, sas_device);
-	}
 }
 
 /**
@@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target *starget)
 	rphy = dev_to_rphy(starget->dev.parent);
 	sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
 	   rphy->identify.sas_address);
-	if (sas_device)
+	if (sas_device && (sas_device->starget == starget) &&
+	    (sas_device->id == starget->id) &&
+	    (sas_device->channel == starget->channel))
 		sas_device->starget = NULL;
 
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -3924,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 
 		mpt2sas_scsih_issue_tm(ioc, handle, lun,
 		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
-		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+		ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
 
 		if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
 		    (mpi_reply->ResponseCode ==
@@ -3934,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 			continue;
 
 		mpt2sas_scsih_issue_tm(ioc, handle, lun,
-		    MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+		    MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30);
+		ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
 		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
 	}
-	ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
 	ioc->broadcast_aen_busy = 0;
 	mutex_unlock(&ioc->tm_cmds.mutex);
 
-- 
GitLab


From 99bb214b1b652c475bb3d79cede47ecb76b758fa Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:42:13 -0600
Subject: [PATCH 0924/1421] [SCSI] mpt2sas : release diagnotic buffers prior
 host reset

Diagnostic buffer support is already there in the driver.  This support allows
applications to pull ring buffers from controller firmware for debugging
firmware related issues.

What this patch does is sends reqeust to firmware to release the buffers prior
to host reset.   This will allow what ever debug info is there prior to reset
to be dma'd to host memory. With out this fix, some of the debug data would
been lost.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_ctl.c | 206 +++++++++++++++++++----------
 drivers/scsi/mpt2sas/mpt2sas_ctl.h |   5 +-
 2 files changed, 141 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 2dc38598c20..ba6ab170bdf 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -64,6 +64,9 @@
 static struct fasync_struct *async_queue;
 static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
 
+static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
+    u8 *issue_reset);
+
 /**
  * enum block_state - blocking state
  * @NON_BLOCKING: non blocking
@@ -378,10 +381,22 @@ _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
 void
 mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 {
+	int i;
+	u8 issue_reset;
+
 	switch (reset_phase) {
 	case MPT2_IOC_PRE_RESET:
 		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+			if (!(ioc->diag_buffer_status[i] &
+			    MPT2_DIAG_BUFFER_IS_REGISTERED))
+				continue;
+			if ((ioc->diag_buffer_status[i] &
+			    MPT2_DIAG_BUFFER_IS_RELEASED))
+				continue;
+			_ctl_send_release(ioc, i, &issue_reset);
+		}
 		break;
 	case MPT2_IOC_AFTER_RESET:
 		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
@@ -395,6 +410,17 @@ mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 	case MPT2_IOC_DONE_RESET:
 		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+
+		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+			if (!(ioc->diag_buffer_status[i] &
+			    MPT2_DIAG_BUFFER_IS_REGISTERED))
+				continue;
+			if ((ioc->diag_buffer_status[i] &
+			    MPT2_DIAG_BUFFER_IS_RELEASED))
+				continue;
+			ioc->diag_buffer_status[i] |=
+			    MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+		}
 		break;
 	}
 }
@@ -1553,81 +1579,38 @@ _ctl_diag_query(void __user *arg)
 }
 
 /**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- * @state - NON_BLOCKING or BLOCKING
+ * _ctl_send_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @issue_reset - specifies whether host reset is required.
  *
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
  */
-static long
-_ctl_diag_release(void __user *arg, enum block_state state)
+static int
+_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
 {
-	struct mpt2_diag_release karg;
-	struct MPT2SAS_ADAPTER *ioc;
-	void *request_data;
-	int rc;
 	Mpi2DiagReleaseRequest_t *mpi_request;
 	Mpi2DiagReleaseReply_t *mpi_reply;
-	u8 buffer_type;
-	unsigned long timeleft;
 	u16 smid;
 	u16 ioc_status;
-	u8 issue_reset = 0;
-
-	if (copy_from_user(&karg, arg, sizeof(karg))) {
-		printk(KERN_ERR "failure at %s:%d/%s()!\n",
-		    __FILE__, __LINE__, __func__);
-		return -EFAULT;
-	}
-	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
-		return -ENODEV;
+	u32 ioc_state;
+	int rc;
+	unsigned long timeleft;
 
 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 	    __func__));
 
-	buffer_type = karg.unique_id & 0x000000ff;
-	if (!_ctl_diag_capability(ioc, buffer_type)) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -EPERM;
-	}
-
-	if ((ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
-		    "registered\n", ioc->name, __func__, buffer_type);
-		return -EINVAL;
-	}
-
-	if (karg.unique_id != ioc->unique_id[buffer_type]) {
-		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
-		    "registered\n", ioc->name, __func__, karg.unique_id);
-		return -EINVAL;
-	}
-
-	if (ioc->diag_buffer_status[buffer_type] &
-	    MPT2_DIAG_BUFFER_IS_RELEASED) {
-		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
-		    "is already released\n", ioc->name, __func__,
-		    buffer_type);
-		return 0;
-	}
-
-	request_data = ioc->diag_buffer[buffer_type];
+	rc = 0;
+	*issue_reset = 0;
 
-	if (!request_data) {
-		printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
-		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
-		return -ENOMEM;
+	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "skipping due to FAULT state\n", ioc->name,
+		    __func__));
+		rc = -EAGAIN;
+		goto out;
 	}
 
-	if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
-		return -EAGAIN;
-	else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
-		return -ERESTARTSYS;
-
 	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
 		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
 		    ioc->name, __func__);
@@ -1643,7 +1626,6 @@ _ctl_diag_release(void __user *arg, enum block_state state)
 		goto out;
 	}
 
-	rc = 0;
 	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
@@ -1662,8 +1644,9 @@ _ctl_diag_release(void __user *arg, enum block_state state)
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2DiagReleaseRequest_t)/4);
 		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
+			*issue_reset = 1;
+		rc = -EFAULT;
+		goto out;
 	}
 
 	/* process the completed Reply Message Frame */
@@ -1689,14 +1672,101 @@ _ctl_diag_release(void __user *arg, enum block_state state)
 		rc = -EFAULT;
 	}
 
- issue_host_reset:
+ out:
+	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+	return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(void __user *arg, enum block_state state)
+{
+	struct mpt2_diag_release karg;
+	struct MPT2SAS_ADAPTER *ioc;
+	void *request_data;
+	int rc;
+	u8 buffer_type;
+	u8 issue_reset = 0;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		printk(KERN_ERR "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+		return -ENODEV;
+
+	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+	    __func__));
+
+	buffer_type = karg.unique_id & 0x000000ff;
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+		return -EPERM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+		    "registered\n", ioc->name, __func__, buffer_type);
+		return -EINVAL;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+		    "registered\n", ioc->name, __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] &
+	    MPT2_DIAG_BUFFER_IS_RELEASED) {
+		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+		    "is already released\n", ioc->name, __func__,
+		    buffer_type);
+		return 0;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+
+	if (!request_data) {
+		printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	/* buffers were released by due to host reset */
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT2_DIAG_BUFFER_IS_RELEASED;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+		    "was released due to host reset\n", ioc->name, __func__,
+		    buffer_type);
+		return 0;
+	}
+
+	if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+		return -EAGAIN;
+	else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+		return -ERESTARTSYS;
+
+	rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
+
 	if (issue_reset)
 		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 		    FORCE_BIG_HAMMER);
 
- out:
-
-	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 	mutex_unlock(&ioc->ctl_cmds.mutex);
 	return rc;
 }
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 5bd7d4cfa81..4da11435533 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -295,8 +295,9 @@ struct mpt2_ioctl_btdh_mapping {
 
 
 /* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED 	(0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED 	(0x02)
+#define MPT2_DIAG_BUFFER_IS_REGISTERED	(0x01)
+#define MPT2_DIAG_BUFFER_IS_RELEASED	(0x02)
+#define MPT2_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
 
 /* application flags for mpt2_diag_register, mpt2_diag_query */
 #define MPT2_APP_FLAGS_APP_OWNED	(0x0001)
-- 
GitLab


From 6f92a7a0aff413cdf42955a187647e3736ebd8f3 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:43:33 -0600
Subject: [PATCH 0925/1421] [SCSI] mpt2sas: fix hotplug event processing

Here's a fix for hotplug events.  The useage of queue_delayed_work seems
to broke the fifo for processing of firmware events.  After several iterations
of adding and removing cabling connected to jbods, the devices are not
getting added becuase kernel thread is activited out of order.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 4dffbec7935..e3a7967259e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -119,7 +119,7 @@ struct sense_info {
  */
 struct fw_event_work {
 	struct list_head 	list;
-	struct delayed_work	work;
+	struct work_struct	work;
 	struct MPT2SAS_ADAPTER *ioc;
 	u8			VF_ID;
 	u8			host_reset_handling;
@@ -2007,8 +2007,8 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
 
 	spin_lock_irqsave(&ioc->fw_event_lock, flags);
 	list_add_tail(&fw_event->list, &ioc->fw_event_list);
-	INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work);
-	queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1);
+	INIT_WORK(&fw_event->work, _firmware_event_work);
+	queue_work(ioc->firmware_event_thread, &fw_event->work);
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
@@ -2052,7 +2052,7 @@ _scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
 		return;
 
 	spin_lock_irqsave(&ioc->fw_event_lock, flags);
-	queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay);
+	queue_work(ioc->firmware_event_thread, &fw_event->work);
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
@@ -4961,7 +4961,7 @@ static void
 _firmware_event_work(struct work_struct *work)
 {
 	struct fw_event_work *fw_event = container_of(work,
-	    struct fw_event_work, work.work);
+	    struct fw_event_work, work);
 	unsigned long flags;
 	struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
 
-- 
GitLab


From 3b8b5c9b1f08660583e5dfe095c24170df62f1d2 Mon Sep 17 00:00:00 2001
From: Eric Moore <eric.moore@lsi.com>
Date: Tue, 21 Apr 2009 15:44:27 -0600
Subject: [PATCH 0926/1421] [SCSI] mpt2sas : bump driver version to
 01.100.02.00

Bump driver version.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/mpt2sas/mpt2sas_base.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index b39a5d635af..babd4cc0cb2 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -68,11 +68,11 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"00.100.11.16"
+#define MPT2SAS_DRIVER_VERSION		"01.100.02.00"
 #define MPT2SAS_MAJOR_VERSION		00
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		11
-#define MPT2SAS_RELEASE_VERSION		16
+#define MPT2SAS_BUILD_VERSION		02
+#define MPT2SAS_RELEASE_VERSION		00
 
 /*
  * Set MPT2SAS_SG_DEPTH value based on user input.
-- 
GitLab


From bf5e84f69618f416e89a5a53434a8c865e70252e Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sun, 19 Apr 2009 19:07:47 +0300
Subject: [PATCH 0927/1421] [SCSI] libosd: fix potential ERR_PTR dereference in
 osd_initiator.c

bio_map_kern() returns an ERR_PTR() not NULL.

Found by smatch (http://repo.or.cz/w/smatch.git).  Compile tested.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/osd/osd_initiator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 2a5f0777148..76de8896223 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -612,9 +612,9 @@ static int _osd_req_list_objects(struct osd_request *or,
 
 	WARN_ON(or->in.bio);
 	bio = bio_map_kern(q, list, len, or->alloc_flags);
-	if (!bio) {
+	if (IS_ERR(bio)) {
 		OSD_ERR("!!! Failed to allocate list_objects BIO\n");
-		return -ENOMEM;
+		return PTR_ERR(bio);
 	}
 
 	bio->bi_rw &= ~(1 << BIO_RW);
-- 
GitLab


From 71f32e31e5638df37904697e2d04182935add85d Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Sun, 19 Apr 2009 19:11:42 +0300
Subject: [PATCH 0928/1421] [SCSI] libosd: OSD2r05: Prepare for rev5 attribute
 list changes

In OSD2r05 draft each attribute list element header was changed
so attribute-value would be 8 bytes aligned. In OSD2r01-r04
it was aligned on 2 bytes. (This is because in OSD2r01 the complete
element was 8 bytes padded at end but the header was not adjusted
and caused permanent miss-alignment.)

OSD1 elements are not padded and might be or might not be aligned.
OSD1 is still supported.

In this code we do all the code re-factoring to separate OSD1/OSD2
differences but do not change actual wire format. All wire format
changes will happen in one patch later, for bisect-ability.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/osd/osd_initiator.c | 86 +++++++++++++++++++++++++-------
 include/scsi/osd_protocol.h      | 20 ++++++--
 2 files changed, 83 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 76de8896223..e266f803aa9 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -205,6 +205,69 @@ static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len)
 		osdv2_attr_list_elem_size(len);
 }
 
+static void _osd_req_alist_elem_encode(struct osd_request *or,
+	void *attr_last, const struct osd_attr *oa)
+{
+	if (osd_req_is_ver1(or)) {
+		struct osdv1_attributes_list_element *attr = attr_last;
+
+		attr->attr_page = cpu_to_be32(oa->attr_page);
+		attr->attr_id = cpu_to_be32(oa->attr_id);
+		attr->attr_bytes = cpu_to_be16(oa->len);
+		memcpy(attr->attr_val, oa->val_ptr, oa->len);
+	} else {
+		struct osdv2_attributes_list_element *attr = attr_last;
+
+		attr->attr_page = cpu_to_be32(oa->attr_page);
+		attr->attr_id = cpu_to_be32(oa->attr_id);
+		attr->attr_bytes = cpu_to_be16(oa->len);
+		memcpy(attr->attr_val, oa->val_ptr, oa->len);
+	}
+}
+
+static int _osd_req_alist_elem_decode(struct osd_request *or,
+	void *cur_p, struct osd_attr *oa, unsigned max_bytes)
+{
+	unsigned inc;
+	if (osd_req_is_ver1(or)) {
+		struct osdv1_attributes_list_element *attr = cur_p;
+
+		if (max_bytes < sizeof(*attr))
+			return -1;
+
+		oa->len = be16_to_cpu(attr->attr_bytes);
+		inc = _osd_req_alist_elem_size(or, oa->len);
+		if (inc > max_bytes)
+			return -1;
+
+		oa->attr_page = be32_to_cpu(attr->attr_page);
+		oa->attr_id = be32_to_cpu(attr->attr_id);
+
+		/* OSD1: On empty attributes we return a pointer to 2 bytes
+		 * of zeros. This keeps similar behaviour with OSD2.
+		 * (See below)
+		 */
+		oa->val_ptr = likely(oa->len) ? attr->attr_val :
+						(u8 *)&attr->attr_bytes;
+	} else {
+		struct osdv2_attributes_list_element *attr = cur_p;
+
+		if (max_bytes < sizeof(*attr))
+			return -1;
+
+		oa->len = be16_to_cpu(attr->attr_bytes);
+		inc = _osd_req_alist_elem_size(or, oa->len);
+		if (inc > max_bytes)
+			return -1;
+
+		oa->attr_page = be32_to_cpu(attr->attr_page);
+		oa->attr_id = be32_to_cpu(attr->attr_id);
+
+		oa->val_ptr = attr->attr_val;
+	}
+	return inc;
+}
+
 static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head)
 {
 	return osd_req_is_ver1(or) ?
@@ -798,7 +861,6 @@ int osd_req_add_set_attr_list(struct osd_request *or,
 	attr_last = or->set_attr.buff + total_bytes;
 
 	for (; nelem; --nelem) {
-		struct osd_attributes_list_element *attr;
 		unsigned elem_size = _osd_req_alist_elem_size(or, oa->len);
 
 		total_bytes += elem_size;
@@ -811,11 +873,7 @@ int osd_req_add_set_attr_list(struct osd_request *or,
 				or->set_attr.buff + or->set_attr.total_bytes;
 		}
 
-		attr = attr_last;
-		attr->attr_page = cpu_to_be32(oa->attr_page);
-		attr->attr_id = cpu_to_be32(oa->attr_id);
-		attr->attr_bytes = cpu_to_be16(oa->len);
-		memcpy(attr->attr_val, oa->val_ptr, oa->len);
+		_osd_req_alist_elem_encode(or, attr_last, oa);
 
 		attr_last += elem_size;
 		++oa;
@@ -1070,15 +1128,10 @@ int osd_req_decode_get_attr_list(struct osd_request *or,
 	}
 
 	for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) {
-		struct osd_attributes_list_element *attr = cur_p;
-		unsigned inc;
+		int inc = _osd_req_alist_elem_decode(or, cur_p, oa,
+						 returned_bytes - cur_bytes);
 
-		oa->len = be16_to_cpu(attr->attr_bytes);
-		inc = _osd_req_alist_elem_size(or, oa->len);
-		OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n",
-			  oa->len, inc, cur_bytes);
-		cur_bytes += inc;
-		if (cur_bytes > returned_bytes) {
+		if (inc < 0) {
 			OSD_ERR("BAD FOOD from target. list not valid!"
 				"c=%d r=%d n=%d\n",
 				cur_bytes, returned_bytes, n);
@@ -1086,10 +1139,7 @@ int osd_req_decode_get_attr_list(struct osd_request *or,
 			break;
 		}
 
-		oa->attr_page = be32_to_cpu(attr->attr_page);
-		oa->attr_id = be32_to_cpu(attr->attr_id);
-		oa->val_ptr = attr->attr_val;
-
+		cur_bytes += inc;
 		cur_p += inc;
 		++oa;
 	}
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index cd3cbf76465..fa8343ce3ca 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -300,15 +300,25 @@ struct osd_attributes_list_attrid {
 	__be32 attr_id;
 } __packed;
 
+/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+	__be32 attr_page;
+	__be32 attr_id;
+	__be16 attr_bytes; /* valid bytes at attr_val without padding */
+	u8 attr_val[0];
+} __packed;
+
 /*
  * osd2r03: 7.1.3.3 List entry format for retrieved attributes and
  *                  for setting attributes
- * NOTE: v2 is 8-bytes aligned, v1 is not aligned.
+ * NOTE: v2 is 8-bytes aligned
  */
-struct osd_attributes_list_element {
+struct osdv2_attributes_list_element {
 	__be32 attr_page;
 	__be32 attr_id;
-	__be16 attr_bytes;
+	__be16 attr_bytes; /* valid bytes at attr_val without padding */
 	u8 attr_val[0];
 } __packed;
 
@@ -324,13 +334,13 @@ enum {
 
 static inline unsigned osdv1_attr_list_elem_size(unsigned len)
 {
-	return ALIGN(len + sizeof(struct osd_attributes_list_element),
+	return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
 		     OSDv1_ATTRIBUTES_ELEM_ALIGN);
 }
 
 static inline unsigned osdv2_attr_list_elem_size(unsigned len)
 {
-	return ALIGN(len + sizeof(struct osd_attributes_list_element),
+	return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
 		     OSD_ATTRIBUTES_ELEM_ALIGN);
 }
 
-- 
GitLab


From f8d3a644bec74fd55dbfb11f95af7bf98fa963dc Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Sun, 19 Apr 2009 19:13:39 +0300
Subject: [PATCH 0929/1421] [SCSI] libosd: OSD2r05: OSD_CRYPTO_KEYID_SIZE will
 grow 20 => 32 bytes

In OSD2r04 draft, cryptographic key size changed to 32 bytes from
OSD1's 20 bytes. This causes a couple of on-the-wire structures
to change, including the CDB.

In this patch the OSD1/OSD2 handling is separated out in regard
to affected structures, but on-the-wire is still the same. All
on the wire changes will be submitted in one patch for bisect-ability.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/osd/osd_initiator.c | 30 +++++++++++++----
 include/scsi/osd_protocol.h      | 55 +++++++++++++++++++++++++-------
 2 files changed, 68 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index e266f803aa9..f61ab84ad20 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -345,9 +345,9 @@ _osd_req_sec_params(struct osd_request *or)
 	struct osd_cdb *ocdb = &or->cdb;
 
 	if (osd_req_is_ver1(or))
-		return &ocdb->v1.sec_params;
+		return (struct osd_security_parameters *)&ocdb->v1.sec_params;
 	else
-		return &ocdb->v2.sec_params;
+		return (struct osd_security_parameters *)&ocdb->v2.sec_params;
 }
 
 void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device)
@@ -1209,6 +1209,24 @@ static int _osd_req_finalize_attr_page(struct osd_request *or)
 	return ret;
 }
 
+static inline void osd_sec_parms_set_out_offset(bool is_v1,
+	struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+	if (is_v1)
+		sec_parms->v1.data_out_integrity_check_offset = offset;
+	else
+		sec_parms->v2.data_out_integrity_check_offset = offset;
+}
+
+static inline void osd_sec_parms_set_in_offset(bool is_v1,
+	struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+	if (is_v1)
+		sec_parms->v1.data_in_integrity_check_offset = offset;
+	else
+		sec_parms->v2.data_in_integrity_check_offset = offset;
+}
+
 static int _osd_req_finalize_data_integrity(struct osd_request *or,
 	bool has_in, bool has_out, const u8 *cap_key)
 {
@@ -1232,8 +1250,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
 		or->out_data_integ.get_attributes_bytes = cpu_to_be64(
 			or->enc_get_attr.total_bytes);
 
-		sec_parms->data_out_integrity_check_offset =
-			osd_req_encode_offset(or, or->out.total_bytes, &pad);
+		osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms,
+			osd_req_encode_offset(or, or->out.total_bytes, &pad));
 
 		ret = _req_append_segment(or, pad, &seg, or->out.last_seg,
 					  &or->out);
@@ -1253,8 +1271,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
 		};
 		unsigned pad;
 
-		sec_parms->data_in_integrity_check_offset =
-			osd_req_encode_offset(or, or->in.total_bytes, &pad);
+		osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms,
+			osd_req_encode_offset(or, or->in.total_bytes, &pad));
 
 		ret = _req_append_segment(or, pad, &seg, or->in.last_seg,
 					  &or->in);
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index fa8343ce3ca..bbeceeb0e55 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -33,8 +33,10 @@ enum {
 	OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */
 
 	OSD_SYSTEMID_LEN = 20,
-	OSD_CRYPTO_KEYID_SIZE = 20,
+	OSDv1_CRYPTO_KEYID_SIZE = 20,
 	/*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/
+	OSDv2_CRYPTO_KEYID_SIZE = 20,
+	OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
 	OSD_CRYPTO_SEED_SIZE = 4,
 	OSD_CRYPTO_NONCE_SIZE = 12,
 	OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
@@ -204,29 +206,40 @@ struct osd_cdb_head {
 /*80*/
 
 /*160 v1*/
-/*184 v2*/
-struct osd_security_parameters {
-/*160*/u8	integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+struct osdv1_security_parameters {
+/*160*/u8	integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
 /*180*/u8	request_nonce[OSD_CRYPTO_NONCE_SIZE];
 /*192*/osd_cdb_offset	data_in_integrity_check_offset;
 /*196*/osd_cdb_offset	data_out_integrity_check_offset;
 } __packed;
 /*200 v1*/
-/*224 v2*/
 
-/* FIXME: osdv2_security_parameters */
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8	integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8	request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset	data_in_integrity_check_offset;
+/*232*/osd_cdb_offset	data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+	union {
+		struct osdv1_security_parameters v1;
+		struct osdv2_security_parameters v2;
+	};
+};
 
 struct osdv1_cdb {
 	struct osd_cdb_head h;
 	u8 caps[OSDv1_CAP_LEN];
-	struct osd_security_parameters sec_params;
+	struct osdv1_security_parameters sec_params;
 } __packed;
 
 struct osdv2_cdb {
 	struct osd_cdb_head h;
 	u8 caps[OSD_CAP_LEN];
-	struct osd_security_parameters sec_params;
-	/* FIXME: osdv2_security_parameters */
+	struct osdv2_security_parameters sec_params;
 } __packed;
 
 struct osd_cdb {
@@ -429,15 +442,35 @@ struct osd_data_out_integrity_info {
 	__be64 data_bytes;
 	__be64 set_attributes_bytes;
 	__be64 get_attributes_bytes;
-	__be64 integrity_check_value;
+	__u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
 } __packed;
 
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+	return sizeof(struct osd_data_out_integrity_info) -
+		(is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
 struct osd_data_in_integrity_info {
 	__be64 data_bytes;
 	__be64 retrieved_attributes_bytes;
-	__be64 integrity_check_value;
+	__u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
 } __packed;
 
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+	return sizeof(struct osd_data_in_integrity_info) -
+		(is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
 struct osd_timestamp {
 	u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
 } __packed;
-- 
GitLab


From e9da4d7f731dafc2b93ce7b31aa09c4d935ef978 Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Sun, 19 Apr 2009 19:17:54 +0300
Subject: [PATCH 0930/1421] [SCSI] libosd: OSD2r05: on-the-wire changes for
 latest OSD2 revision 5.

OSC's OSD2 target: [git clone git://git.open-osd.org/osc-osd/ master]
(Initiator code prior to this patch must use: "git checkout CDB_VER_OSD2r01"
 in the target tree above)

This is a summery of the wire changes:

 * OSDv2_ADDITIONAL_CDB_LENGTH == 192 => 228 (Total CDB is now 236 bytes)
 * Attributes List Element Header grew, so attribute values are 8 bytes
   aligned.
 * Cryptographic keys and signatures are 20 => 32
 * Few new definitions.

(Still missing new standard definitions attribute values, these do not change
 wire format and will be added later when needed)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/osd/osd_initiator.c |  7 ++++++-
 include/scsi/osd_protocol.h      | 23 +++++++++++++----------
 2 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index f61ab84ad20..1ce6b24abab 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -263,7 +263,12 @@ static int _osd_req_alist_elem_decode(struct osd_request *or,
 		oa->attr_page = be32_to_cpu(attr->attr_page);
 		oa->attr_id = be32_to_cpu(attr->attr_id);
 
-		oa->val_ptr = attr->attr_val;
+		/* OSD2: For convenience, on empty attributes, we return 8 bytes
+		 * of zeros here. This keeps the same behaviour with OSD2r04,
+		 * and is nice with null terminating ASCII fields.
+		 * oa->val_ptr == NULL marks the end-of-list, or error.
+		 */
+		oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved;
 	}
 	return inc;
 }
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index bbeceeb0e55..62b2ab8c69d 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -24,18 +24,17 @@ enum {
 	OSDv1_ADDITIONAL_CDB_LENGTH = 192,
 	OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
 	OSDv1_CAP_LEN = 80,
+
 	/* Latest supported version */
-/* 	OSD_ADDITIONAL_CDB_LENGTH = 216,*/
+	OSDv2_ADDITIONAL_CDB_LENGTH = 228,
 	OSD_ADDITIONAL_CDB_LENGTH =
-		OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */
+		OSDv2_ADDITIONAL_CDB_LENGTH,
 	OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
-/* 	OSD_CAP_LEN = 104,*/
-	OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */
+	OSD_CAP_LEN = 104,
 
 	OSD_SYSTEMID_LEN = 20,
 	OSDv1_CRYPTO_KEYID_SIZE = 20,
-	/*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/
-	OSDv2_CRYPTO_KEYID_SIZE = 20,
+	OSDv2_CRYPTO_KEYID_SIZE = 32,
 	OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
 	OSD_CRYPTO_SEED_SIZE = 4,
 	OSD_CRYPTO_NONCE_SIZE = 12,
@@ -166,7 +165,11 @@ struct osd_cdb_head {
 			/* called allocation_length in some commands */
 /*32*/			__be64	length;
 /*40*/			__be64	start_address;
-/*48*/			__be32 list_identifier;/* Rarely used */
+			union {
+/*48*/				__be32 list_identifier;/* Rarely used */
+				/* OSD2r05 5.2.5 CDB continuation length */
+/*48*/				__be32 cdb_continuation_length;
+			};
 		} __packed v2;
 	};
 /*52*/	union { /* selected attributes mode Page/List/Single */
@@ -331,6 +334,7 @@ struct osdv1_attributes_list_element {
 struct osdv2_attributes_list_element {
 	__be32 attr_page;
 	__be32 attr_id;
+	u8 reserved[6];
 	__be16 attr_bytes; /* valid bytes at attr_val without padding */
 	u8 attr_val[0];
 } __packed;
@@ -520,7 +524,7 @@ enum osd_capability_bit_masks {
 
 	OSD_SEC_CAP_NONE1	= BIT(8),
 	OSD_SEC_CAP_NONE2	= BIT(9),
-	OSD_SEC_CAP_NONE3	= BIT(10),
+	OSD_SEC_GBL_REM 	= BIT(10), /*v2 only*/
 	OSD_SEC_CAP_QUERY	= BIT(11), /*v2 only*/
 	OSD_SEC_CAP_M_OBJECT	= BIT(12), /*v2 only*/
 	OSD_SEC_CAP_POL_SEC	= BIT(13),
@@ -595,8 +599,7 @@ struct osdv1_capability {
 
 struct osd_capability {
 	struct osd_capability_head h;
-/* 	struct osd_cap_object_descriptor od;*/
-	struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */
+	struct osd_cap_object_descriptor od;
 } __packed;
 
 /**
-- 
GitLab


From e60990023cac11bc6185e7a7f1007fbbb8d30e4d Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 07:06:37 -0500
Subject: [PATCH 0931/1421] davinci: timers: use clk_get_rate()

Use clock framework instead of hard-coded CLOCK_TICK_RATE for
determining timer tick frequencies.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/time.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 88864ae067b..494e01bff5c 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -31,6 +31,7 @@
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
+static unsigned int davinci_clock_tick_rate;
 
 #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
 #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
@@ -282,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		t->period = CLOCK_TICK_RATE / (HZ);
+		t->period = davinci_clock_tick_rate / (HZ);
 		t->opts = TIMER_OPTS_PERIODIC;
 		timer32_config(t);
 		break;
@@ -309,21 +310,29 @@ static struct clock_event_device clockevent_davinci = {
 
 static void __init davinci_timer_init(void)
 {
+	struct clk *timer_clk;
+
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
 
 	/* init timer hw */
 	timer_init();
 
+	timer_clk = clk_get(NULL, "timer0");
+	BUG_ON(IS_ERR(timer_clk));
+	clk_enable(timer_clk);
+
+	davinci_clock_tick_rate = clk_get_rate(timer_clk);
+
 	/* setup clocksource */
 	clocksource_davinci.mult =
-		clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+		clocksource_khz2mult(davinci_clock_tick_rate/1000,
 				     clocksource_davinci.shift);
 	if (clocksource_register(&clocksource_davinci))
 		printk(err, clocksource_davinci.name);
 
 	/* setup clockevent */
-	clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
 					 clockevent_davinci.shift);
 	clockevent_davinci.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
@@ -343,6 +352,15 @@ struct sys_timer davinci_timer = {
 void davinci_watchdog_reset(void) {
 	u32 tgcr, wdtcr;
 	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+	struct device dev;
+	struct clk *wd_clk;
+	char *name = "watchdog";
+
+	dev_set_name(&dev, name);
+	wd_clk = clk_get(&dev, NULL);
+	if (WARN_ON(IS_ERR(wd_clk)))
+		return;
+	clk_enable(wd_clk);
 
 	/* disable, internal clock source */
 	__raw_writel(0, base + TCR);
-- 
GitLab


From a4768d2275cb7c0d2a665b9ad4de07834be0714b Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 07:18:14 -0500
Subject: [PATCH 0932/1421] davinci: add EDMA driver

Original code for 2.6.10 and 2.6.28 series done by Texas Instruments
and MontaVista, but major updates and rework done by Troy Kisky and
David Brownell.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Makefile            |    2 +-
 arch/arm/mach-davinci/dma.c               | 1135 +++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/edma.h |  228 +++++
 3 files changed, 1364 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-davinci/dma.c
 create mode 100644 arch/arm/mach-davinci/include/mach/edma.h

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 4dc458597f4..3ee3d73d956 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o mux.o devices.o usb.o
+			   gpio.o mux.o devices.o dma.o usb.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
new file mode 100644
index 00000000000..15e9eb158bb
--- /dev/null
+++ b/arch/arm/mach-davinci/dma.c
@@ -0,0 +1,1135 @@
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT		0x00
+#define PARM_SRC		0x04
+#define PARM_A_B_CNT		0x08
+#define PARM_DST		0x0c
+#define PARM_SRC_DST_BIDX	0x10
+#define PARM_LINK_BCNTRLD	0x14
+#define PARM_SRC_DST_CIDX	0x18
+#define PARM_CCNT		0x1c
+
+#define PARM_SIZE		0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER		0x00	/* 64 bits */
+#define SH_ECR		0x08	/* 64 bits */
+#define SH_ESR		0x10	/* 64 bits */
+#define SH_CER		0x18	/* 64 bits */
+#define SH_EER		0x20	/* 64 bits */
+#define SH_EECR		0x28	/* 64 bits */
+#define SH_EESR		0x30	/* 64 bits */
+#define SH_SER		0x38	/* 64 bits */
+#define SH_SECR		0x40	/* 64 bits */
+#define SH_IER		0x50	/* 64 bits */
+#define SH_IECR		0x58	/* 64 bits */
+#define SH_IESR		0x60	/* 64 bits */
+#define SH_IPR		0x68	/* 64 bits */
+#define SH_ICR		0x70	/* 64 bits */
+#define SH_IEVAL	0x78
+#define SH_QER		0x80
+#define SH_QEER		0x84
+#define SH_QEECR	0x88
+#define SH_QEESR	0x8c
+#define SH_QSER		0x90
+#define SH_QSECR	0x94
+#define SH_SIZE		0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV	0x0000
+#define EDMA_CCCFG	0x0004
+#define EDMA_QCHMAP	0x0200	/* 8 registers */
+#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM	0x0260
+#define EDMA_QUETCMAP	0x0280
+#define EDMA_QUEPRI	0x0284
+#define EDMA_EMR	0x0300	/* 64 bits */
+#define EDMA_EMCR	0x0308	/* 64 bits */
+#define EDMA_QEMR	0x0310
+#define EDMA_QEMCR	0x0314
+#define EDMA_CCERR	0x0318
+#define EDMA_CCERRCLR	0x031c
+#define EDMA_EEVAL	0x0320
+#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
+#define EDMA_QRAE	0x0380	/* 4 registers */
+#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
+#define EDMA_QSTAT	0x0600	/* 2 registers */
+#define EDMA_QWMTHRA	0x0620
+#define EDMA_QWMTHRB	0x0624
+#define EDMA_CCSTAT	0x0640
+
+#define EDMA_M		0x1000	/* global channel registers */
+#define EDMA_ECR	0x1008
+#define EDMA_ECRH	0x100C
+#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
+#define EDMA_PARM	0x4000	/* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE	0x01C00000
+
+#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH           64
+#define EDMA_MAX_PARAMENTRY     512
+#define EDMA_MAX_EVQUE            2	/* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+	return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+	__raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+	unsigned val = edma_read(offset);
+	val &= and;
+	val |= or;
+	edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+	unsigned val = edma_read(offset);
+	val &= and;
+	edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+	unsigned val = edma_read(offset);
+	val |= or;
+	edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+	return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+	edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+		unsigned and, unsigned or)
+{
+	edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+	edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+	edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+	edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+	return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+	return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+	edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+	edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+	return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+	edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+		unsigned and, unsigned or)
+{
+	edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+	edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+	edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+	void (*callback)(unsigned channel, unsigned short ch_status,
+			 void *data);
+	void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform.  It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+	.link_bcntrld = 0xffff,
+	.ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+	int bit = (ch_no & 0x7) * 4;
+
+	/* default to low priority queue */
+	if (queue_no == EVENTQ_DEFAULT)
+		queue_no = EVENTQ_1;
+
+	queue_no &= 7;
+	edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+			~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+	int bit = queue_no * 4;
+	edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+	int bit = queue_no * 4;
+	edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+	void (*callback)(unsigned channel, u16 ch_status, void *data),
+	void *data)
+{
+	if (!callback) {
+		edma_shadow0_write_array(SH_IECR, lch >> 5,
+				(1 << (lch & 0x1f)));
+	}
+
+	intr_data[lch].callback = callback;
+	intr_data[lch].data = data;
+
+	if (callback) {
+		edma_shadow0_write_array(SH_ICR, lch >> 5,
+				(1 << (lch & 0x1f)));
+		edma_shadow0_write_array(SH_IESR, lch >> 5,
+				(1 << (lch & 0x1f)));
+	}
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+	int i;
+	unsigned int cnt = 0;
+
+	dev_dbg(data, "dma_irq_handler\n");
+
+	if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+	    && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+		return IRQ_NONE;
+
+	while (1) {
+		int j;
+		if (edma_shadow0_read_array(SH_IPR, 0))
+			j = 0;
+		else if (edma_shadow0_read_array(SH_IPR, 1))
+			j = 1;
+		else
+			break;
+		dev_dbg(data, "IPR%d %08x\n", j,
+				edma_shadow0_read_array(SH_IPR, j));
+		for (i = 0; i < 32; i++) {
+			int k = (j << 5) + i;
+			if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+				/* Clear the corresponding IPR bits */
+				edma_shadow0_write_array(SH_ICR, j, (1 << i));
+				if (intr_data[k].callback) {
+					intr_data[k].callback(k, DMA_COMPLETE,
+						intr_data[k].data);
+				}
+			}
+		}
+		cnt++;
+		if (cnt > 10)
+			break;
+	}
+	edma_shadow0_write(SH_IEVAL, 1);
+	return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+	int i;
+	unsigned int cnt = 0;
+
+	dev_dbg(data, "dma_ccerr_handler\n");
+
+	if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+	    (edma_read_array(EDMA_EMR, 1) == 0) &&
+	    (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+		return IRQ_NONE;
+
+	while (1) {
+		int j = -1;
+		if (edma_read_array(EDMA_EMR, 0))
+			j = 0;
+		else if (edma_read_array(EDMA_EMR, 1))
+			j = 1;
+		if (j >= 0) {
+			dev_dbg(data, "EMR%d %08x\n", j,
+					edma_read_array(EDMA_EMR, j));
+			for (i = 0; i < 32; i++) {
+				int k = (j << 5) + i;
+				if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+					/* Clear the corresponding EMR bits */
+					edma_write_array(EDMA_EMCR, j, 1 << i);
+					/* Clear any SER */
+					edma_shadow0_write_array(SH_SECR, j,
+							(1 << i));
+					if (intr_data[k].callback) {
+						intr_data[k].callback(k,
+								DMA_CC_ERROR,
+								intr_data
+								[k].data);
+					}
+				}
+			}
+		} else if (edma_read(EDMA_QEMR)) {
+			dev_dbg(data, "QEMR %02x\n",
+				edma_read(EDMA_QEMR));
+			for (i = 0; i < 8; i++) {
+				if (edma_read(EDMA_QEMR) & (1 << i)) {
+					/* Clear the corresponding IPR bits */
+					edma_write(EDMA_QEMCR, 1 << i);
+					edma_shadow0_write(SH_QSECR, (1 << i));
+
+					/* NOTE:  not reported!! */
+				}
+			}
+		} else if (edma_read(EDMA_CCERR)) {
+			dev_dbg(data, "CCERR %08x\n",
+				edma_read(EDMA_CCERR));
+			/* FIXME:  CCERR.BIT(16) ignored!  much better
+			 * to just write CCERRCLR with CCERR value...
+			 */
+			for (i = 0; i < 8; i++) {
+				if (edma_read(EDMA_CCERR) & (1 << i)) {
+					/* Clear the corresponding IPR bits */
+					edma_write(EDMA_CCERRCLR, 1 << i);
+
+					/* NOTE:  not reported!! */
+				}
+			}
+		}
+		if ((edma_read_array(EDMA_EMR, 0) == 0)
+		    && (edma_read_array(EDMA_EMR, 1) == 0)
+		    && (edma_read(EDMA_QEMR) == 0)
+		    && (edma_read(EDMA_CCERR) == 0)) {
+			break;
+		}
+		cnt++;
+		if (cnt > 10)
+			break;
+	}
+	edma_write(EDMA_EEVAL, 1);
+	return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled	false	/* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+	dev_dbg(data, "dma_tc0err_handler\n");
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+	dev_dbg(data, "dma_tc1err_handler\n");
+	return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free:  dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ *	Controller (TC) executes requests using this channel.  Use
+ *	EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel.  When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining.  When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set.  Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+		void (*callback)(unsigned channel, u16 ch_status, void *data),
+		void *data,
+		enum dma_event_q eventq_no)
+{
+	if (channel < 0) {
+		channel = 0;
+		for (;;) {
+			channel = find_next_bit(edma_noevent,
+					num_channels, channel);
+			if (channel == num_channels)
+				return -ENOMEM;
+			if (!test_and_set_bit(channel, edma_inuse))
+				break;
+			channel++;
+		}
+	} else if (channel >= num_channels) {
+		return -EINVAL;
+	} else if (test_and_set_bit(channel, edma_inuse)) {
+		return -EBUSY;
+	}
+
+	/* ensure access through shadow region 0 */
+	edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+	/* ensure no events are pending */
+	edma_stop(channel);
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+			&dummy_paramset, PARM_SIZE);
+
+	if (callback)
+		setup_dma_interrupt(channel, callback, data);
+
+	map_dmach_queue(channel, eventq_no);
+
+	return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+	if (channel >= num_channels)
+		return;
+
+	setup_dma_interrupt(channel, NULL, NULL);
+	/* REVISIT should probably take out of shadow region 0 */
+
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+			&dummy_paramset, PARM_SIZE);
+	clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer.  Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+	if (slot < 0) {
+		slot = num_channels;
+		for (;;) {
+			slot = find_next_zero_bit(edma_inuse,
+					num_slots, slot);
+			if (slot == num_slots)
+				return -ENOMEM;
+			if (!test_and_set_bit(slot, edma_inuse))
+				break;
+		}
+	} else if (slot < num_channels || slot >= num_slots) {
+		return -EINVAL;
+	} else if (test_and_set_bit(slot, edma_inuse)) {
+		return -EBUSY;
+	}
+
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+
+	return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+	if (slot < num_channels || slot >= num_slots)
+		return;
+
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+	clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+				enum address_mode mode, enum fifo_width width)
+{
+	if (slot < num_slots) {
+		unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+		if (mode) {
+			/* set SAM and program FWID */
+			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+		} else {
+			/* clear SAM */
+			i &= ~SAM;
+		}
+		edma_parm_write(PARM_OPT, slot, i);
+
+		/* set the source port address
+		   in source register of param structure */
+		edma_parm_write(PARM_SRC, slot, src_port);
+	}
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+				 enum address_mode mode, enum fifo_width width)
+{
+	if (slot < num_slots) {
+		unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+		if (mode) {
+			/* set DAM and program FWID */
+			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+		} else {
+			/* clear DAM */
+			i &= ~DAM;
+		}
+		edma_parm_write(PARM_OPT, slot, i);
+		/* set the destination port address
+		   in dest register of param structure */
+		edma_parm_write(PARM_DST, slot, dest_port);
+	}
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot.  Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+	struct edmacc_param temp;
+
+	edma_read_slot(slot, &temp);
+	if (src != NULL)
+		*src = temp.src;
+	if (dst != NULL)
+		*dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+	if (slot < num_slots) {
+		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+				0xffff0000, src_bidx);
+		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+				0xffff0000, src_cidx);
+	}
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+	if (slot < num_slots) {
+		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+				0x0000ffff, dest_bidx << 16);
+		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+				0x0000ffff, dest_cidx << 16);
+	}
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ *	the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots.  If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register.  In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO.  It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+		u16 acnt, u16 bcnt, u16 ccnt,
+		u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+	if (slot < num_slots) {
+		edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+				0x0000ffff, bcnt_rld << 16);
+		if (sync_mode == ASYNC)
+			edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+		else
+			edma_parm_or(PARM_OPT, slot, SYNCDIM);
+		/* Set the acount, bcount, ccount registers */
+		edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+		edma_parm_write(PARM_CCNT, slot, ccnt);
+	}
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+	if (from >= num_slots)
+		return;
+	if (to >= num_slots)
+		return;
+	edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+	if (from >= num_slots)
+		return;
+	edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once.  This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+	if (slot >= num_slots)
+		return;
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+	if (slot >= num_slots)
+		return;
+	memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+	if (channel < num_channels) {
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+	}
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+	if (channel < num_channels) {
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+	}
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software.  (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+	if (channel < num_channels) {
+		int j = channel >> 5;
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		/* EDMA channels without event association */
+		if (test_bit(channel, edma_noevent)) {
+			pr_debug("EDMA: ESR%d %08x\n", j,
+				edma_shadow0_read_array(SH_ESR, j));
+			edma_shadow0_write_array(SH_ESR, j, mask);
+			return 0;
+		}
+
+		/* EDMA channel with event association */
+		pr_debug("EDMA: ER%d %08x\n", j,
+			edma_shadow0_read_array(SH_ER, j));
+		/* Clear any pending error */
+		edma_write_array(EDMA_EMCR, j, mask);
+		/* Clear any SER */
+		edma_shadow0_write_array(SH_SECR, j, mask);
+		edma_shadow0_write_array(SH_EESR, j, mask);
+		pr_debug("EDMA: EER%d %08x\n", j,
+			edma_shadow0_read_array(SH_EER, j));
+		return 0;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared.  The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+	if (channel < num_channels) {
+		int j = channel >> 5;
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		edma_shadow0_write_array(SH_EECR, j, mask);
+		edma_shadow0_write_array(SH_ECR, j, mask);
+		edma_shadow0_write_array(SH_SECR, j, mask);
+		edma_write_array(EDMA_EMCR, j, mask);
+
+		pr_debug("EDMA: EER%d %08x\n", j,
+				edma_shadow0_read_array(SH_EER, j));
+
+		/* REVISIT:  consider guarding against inappropriate event
+		 * chaining by overwriting with dummy_paramset.
+		 */
+	}
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ *      ch_no     - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+	if (channel < num_channels) {
+		int j = (channel >> 5);
+		unsigned int mask = 1 << (channel & 0x1f);
+
+		pr_debug("EDMA: EMR%d %08x\n", j,
+				edma_read_array(EDMA_EMR, j));
+		edma_shadow0_write_array(SH_ECR, j, mask);
+		/* Clear the corresponding EMR bits */
+		edma_write_array(EDMA_EMCR, j, mask);
+		/* Clear any SER */
+		edma_shadow0_write_array(SH_SECR, j, mask);
+		edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+	}
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ *	channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+	if (channel >= num_channels)
+		return;
+	if (channel < 32)
+		edma_write(EDMA_ECR, 1 << channel);
+	else
+		edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+	struct edma_soc_info	*info = pdev->dev.platform_data;
+	int			i;
+	int			status;
+	const s8		*noevent;
+	int			irq = 0, err_irq = 0;
+	struct resource		*r;
+	resource_size_t		len;
+
+	if (!info)
+		return -ENODEV;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+	if (!r)
+		return -ENODEV;
+
+	len = r->end - r->start + 1;
+
+	r = request_mem_region(r->start, len, r->name);
+	if (!r)
+		return -EBUSY;
+
+	edmacc_regs_base = ioremap(r->start, len);
+	if (!edmacc_regs_base) {
+		status = -EBUSY;
+		goto fail1;
+	}
+
+	num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+	num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+	dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+	for (i = 0; i < num_slots; i++)
+		memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+				&dummy_paramset, PARM_SIZE);
+
+	noevent = info->noevent;
+	if (noevent) {
+		while (*noevent != -1)
+			set_bit(*noevent++, edma_noevent);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+	if (status < 0) {
+		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+			irq, status);
+		goto fail;
+	}
+
+	err_irq = platform_get_irq(pdev, 1);
+	status = request_irq(err_irq, dma_ccerr_handler, 0,
+				"edma_error", &pdev->dev);
+	if (status < 0) {
+		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+			err_irq, status);
+		goto fail;
+	}
+
+	if (tc_errs_handled) {
+		status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+					"edma_tc0", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				IRQ_TCERRINT0, status);
+			return status;
+		}
+		status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+					"edma_tc1", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+				IRQ_TCERRINT, status);
+			return status;
+		}
+	}
+
+	/* Everything lives on transfer controller 1 until otherwise specified.
+	 * This way, long transfers on the low priority queue
+	 * started by the codec engine will not cause audio defects.
+	 */
+	for (i = 0; i < num_channels; i++)
+		map_dmach_queue(i, EVENTQ_1);
+
+	/* Event queue to TC mapping */
+	for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+		map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+	/* Event queue priority mapping */
+	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+		assign_priority_to_queue(queue_priority_mapping[i][0],
+					 queue_priority_mapping[i][1]);
+
+	for (i = 0; i < info->n_region; i++) {
+		edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+		edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+		edma_write_array(EDMA_QRAE, i, 0x0);
+	}
+
+	return 0;
+
+fail:
+	if (err_irq)
+		free_irq(err_irq, NULL);
+	if (irq)
+		free_irq(irq, NULL);
+	iounmap(edmacc_regs_base);
+fail1:
+	release_mem_region(r->start, len);
+	return status;
+}
+
+
+static struct platform_driver edma_driver = {
+	.driver.name	= "edma",
+};
+
+static int __init edma_init(void)
+{
+	return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
new file mode 100644
index 00000000000..f6fc5396daf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -0,0 +1,228 @@
+/*
+ *  TI DAVINCI dma definitions
+ *
+ *  Copyright (C) 2006-2009 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ *  Channel	Triggers transfers, usually from a hardware event but
+ *		also manually or by "chaining" from DMA completions.
+ *		Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ *  Slot	Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ *		"set"), source and destination addresses, a link to a
+ *		next PaRAM slot (if any), options for the transfer, and
+ *		instructions for updating those addresses.  There are
+ *		more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers.  An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers.  When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining).  The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface.  (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+	unsigned int opt;
+	unsigned int src;
+	unsigned int a_b_cnt;
+	unsigned int dst;
+	unsigned int src_dst_bidx;
+	unsigned int link_bcntrld;
+	unsigned int src_dst_cidx;
+	unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT     16
+#define CCERRINT_INTERRUPT   17
+#define TCERRINT0_INTERRUPT   18
+#define TCERRINT1_INTERRUPT   19
+
+/* fields in edmacc_param.opt */
+#define SAM		BIT(0)
+#define DAM		BIT(1)
+#define SYNCDIM		BIT(2)
+#define STATIC		BIT(3)
+#define EDMA_FWID	(0x07 << 8)
+#define TCCMODE		BIT(11)
+#define EDMA_TCC(t)	((t) << 12)
+#define TCINTEN		BIT(20)
+#define ITCINTEN	BIT(21)
+#define TCCHEN		BIT(22)
+#define ITCCHEN		BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead.  (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX              2
+#define DAVINCI_DMA_MCBSP_RX              3
+#define DAVINCI_DMA_VPSS_HIST             4
+#define DAVINCI_DMA_VPSS_H3A              5
+#define DAVINCI_DMA_VPSS_PRVU             6
+#define DAVINCI_DMA_VPSS_RSZ              7
+#define DAVINCI_DMA_IMCOP_IMXINT          8
+#define DAVINCI_DMA_IMCOP_VLCDINT         9
+#define DAVINCI_DMA_IMCO_PASQINT         10
+#define DAVINCI_DMA_IMCOP_DSQINT         11
+#define DAVINCI_DMA_SPI_SPIX             16
+#define DAVINCI_DMA_SPI_SPIR             17
+#define DAVINCI_DMA_UART0_URXEVT0        18
+#define DAVINCI_DMA_UART0_UTXEVT0        19
+#define DAVINCI_DMA_UART1_URXEVT1        20
+#define DAVINCI_DMA_UART1_UTXEVT1        21
+#define DAVINCI_DMA_UART2_URXEVT2        22
+#define DAVINCI_DMA_UART2_UTXEVT2        23
+#define DAVINCI_DMA_MEMSTK_MSEVT         24
+#define DAVINCI_DMA_MMCRXEVT             26
+#define DAVINCI_DMA_MMCTXEVT             27
+#define DAVINCI_DMA_I2C_ICREVT           28
+#define DAVINCI_DMA_I2C_ICXEVT           29
+#define DAVINCI_DMA_GPIO_GPINT0          32
+#define DAVINCI_DMA_GPIO_GPINT1          33
+#define DAVINCI_DMA_GPIO_GPINT2          34
+#define DAVINCI_DMA_GPIO_GPINT3          35
+#define DAVINCI_DMA_GPIO_GPINT4          36
+#define DAVINCI_DMA_GPIO_GPINT5          37
+#define DAVINCI_DMA_GPIO_GPINT6          38
+#define DAVINCI_DMA_GPIO_GPINT7          39
+#define DAVINCI_DMA_GPIO_GPBNKINT0       40
+#define DAVINCI_DMA_GPIO_GPBNKINT1       41
+#define DAVINCI_DMA_GPIO_GPBNKINT2       42
+#define DAVINCI_DMA_GPIO_GPBNKINT3       43
+#define DAVINCI_DMA_GPIO_GPBNKINT4       44
+#define DAVINCI_DMA_TIMER0_TINT0         48
+#define DAVINCI_DMA_TIMER1_TINT1         49
+#define DAVINCI_DMA_TIMER2_TINT2         50
+#define DAVINCI_DMA_TIMER3_TINT3         51
+#define DAVINCI_DMA_PWM0                 52
+#define DAVINCI_DMA_PWM1                 53
+#define DAVINCI_DMA_PWM2                 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+	INCR = 0,
+	FIFO = 1
+};
+
+enum fifo_width {
+	W8BIT = 0,
+	W16BIT = 1,
+	W32BIT = 2,
+	W64BIT = 3,
+	W128BIT = 4,
+	W256BIT = 5
+};
+
+enum dma_event_q {
+	EVENTQ_0 = 0,
+	EVENTQ_1 = 1,
+	EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+	ASYNC = 0,
+	ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+	void (*callback)(unsigned channel, u16 ch_status, void *data),
+	void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+				enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+				 enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+		u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+	/* how many dma resources of each type */
+	unsigned	n_channel;
+	unsigned	n_region;
+	unsigned	n_slot;
+	unsigned	n_tc;
+
+	/* list of channels with no even trigger; terminated by "-1" */
+	const s8	*noevent;
+};
+
+#endif
-- 
GitLab


From 474dad54baee8f8abe63ac334357a37021147701 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sun, 7 Dec 2008 11:46:23 -0800
Subject: [PATCH 0933/1421] davinci: gpio bugfixes

Update the DaVinci GPIO code to work better on non-dm6446 parts,
notably the dm355:

 - Only handle the number of GPIOs the chip actually has.  So
   for example on dm6467, GPIO-42 is the last GPIO, and trying
   to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446.

 - Enable GPIO interrupts on each 16-bit GPIO-irq bank ...
   previously, only the first five were enabled, so GPIO-80
   and above (on dm355) wouldn't trigger IRQs.

 - Use the right IRQ for each GPIO bank.  The wrong values were
   used for dm355 chips, so GPIO IRQs got routed incorrectly.

 - Handle up to four pairs of 16-bit GPIO banks ... previously
   only three were handled, so accessing GPIO-96 and up (e.g. on
   dm355) would oops.

 - Update several comments that were dm6446-specific.

Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs
on the DM355 EVM.

One thing this doesn't do is handle the way some of the GPIO
numbers on dm6467 are reserved but aren't valid as GPIOs.  Some
bitmap logic could fix that if needed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/gpio.c              | 82 ++++++++++++++++-------
 arch/arm/mach-davinci/include/mach/gpio.h | 23 +++----
 2 files changed, 69 insertions(+), 36 deletions(-)

diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index b49e9d092aa..1aba41c6351 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
+#include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -36,9 +37,10 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
+static unsigned __initdata ngpio;
 
 /* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
@@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
 {
 	int i, base;
 
-	for (i = 0, base = 0;
-			i < ARRAY_SIZE(chips);
-			i++, base += 32) {
+	/* The gpio banks conceptually expose a segmented bitmap,
+	 * and "ngpio" is one more than the largest zero-based
+	 * bit index that's valid.
+	 */
+	if (cpu_is_davinci_dm355()) {		/* or dm335() */
+		ngpio = 104;
+	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
+		ngpio = 71;
+	} else if (cpu_is_davinci_dm646x()) {
+		/* NOTE:  each bank has several "reserved" bits,
+		 * unusable as GPIOs.  Only 33 of the GPIO numbers
+		 * are usable, and we're not rejecting the others.
+		 */
+		ngpio = 43;
+	} else {
+		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+		ngpio = DAVINCI_N_GPIO;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
 
 		chips[i].chip.direction_input = davinci_direction_in;
@@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
 		chips[i].chip.set = davinci_gpio_set;
 
 		chips[i].chip.base = base;
-		chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+		chips[i].chip.ngpio = ngpio - base;
 		if (chips[i].chip.ngpio > 32)
 			chips[i].chip.ngpio = 32;
 
@@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
  * We expect irqs will normally be set up as input pins, but they can also be
  * used as output pins ... which is convenient for testing.
  *
- * NOTE:  GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead).  But we don't have
- * a good way to hook those up ...
+ * NOTE:  The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options).  We don't try to use those.
  *
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
  */
 
@@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 }
 
 /*
- * NOTE:  for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE:  for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
  * calls ... so if no gpios are wakeup events the clock can be disabled,
  * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
  */
 
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
+	unsigned	bank_irq;
 	struct clk	*clk;
+	u32		binten = 0;
+
+	if (cpu_is_davinci_dm355()) {		/* or dm335() */
+		bank_irq = IRQ_DM355_GPIOBNK0;
+	} else if (cpu_is_davinci_dm644x()) {
+		bank_irq = IRQ_GPIOBNK0;
+	} else if (cpu_is_davinci_dm646x()) {
+		bank_irq = IRQ_DM646X_GPIOBNK0;
+	} else {
+		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+		return -EINVAL;
+	}
 
 	clk = clk_get(NULL, "gpio");
 	if (IS_ERR(clk)) {
 		printk(KERN_ERR "Error %ld getting gpio clock?\n",
 		       PTR_ERR(clk));
-		return 0;
+		return PTR_ERR(clk);
 	}
-
 	clk_enable(clk);
 
-	for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
-	     gpio < DAVINCI_N_GPIO; bank++) {
+	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+			gpio < ngpio;
+			bank++, bank_irq++) {
 		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
@@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
 		__raw_writel(~0, &g->clr_rising);
 
 		/* set up all irqs in this bank */
-		set_irq_chained_handler(bank, gpio_irq_handler);
-		set_irq_chip_data(bank, g);
-		set_irq_data(bank, (void *)irq);
+		set_irq_chained_handler(bank_irq, gpio_irq_handler);
+		set_irq_chip_data(bank_irq, g);
+		set_irq_data(bank_irq, (void *)irq);
 
-		for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
-		     i++, irq++, gpio++) {
+		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
+
+		binten |= BIT(bank);
 	}
 
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(0x1f, (void *__iomem)
+	__raw_writel(binten, (void *__iomem)
 		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-
 arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 5e7c36b202f..efe3281364e 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -28,23 +28,18 @@
  * go through boot loaders.
  *
  * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
  * used as gpios, not with other peripherals.
  *
  * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N).  These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
+ * may not support all the GPIOs in that range.
  *
  * GPIOs can also be on external chips, numbered after the ones built-in
  * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
  */
-#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
-#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
-#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
 struct gpio_controller {
 	u32	dir;
@@ -73,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
 {
 	void *__iomem ptr;
 
-	if (gpio < 32)
+	if (gpio < 32 * 1)
 		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
-	else if (gpio < 64)
+	else if (gpio < 32 * 2)
 		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
-	else if (gpio < DAVINCI_N_GPIO)
+	else if (gpio < 32 * 3)
 		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else if (gpio < 32 * 4)
+		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
 	else
 		ptr = NULL;
 	return ptr;
-- 
GitLab


From fe277d9bbba9c2851ec11edcd5701f82e034ddd4 Mon Sep 17 00:00:00 2001
From: "Mark A. Greer" <mgreer@mvista.com>
Date: Thu, 26 Mar 2009 19:33:21 -0700
Subject: [PATCH 0934/1421] davinci: PSC: Clear bits in MDCTL reg before
 setting new bits

Clear any set bits in the 'NEXT' field of the MDCTL register in the
Power and Sleep Controller (PSC) before setting any new bits.
This also allows some minor cleanup by removing some no longer
needed lines of code.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/psc.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index e44544ac2b1..84171abf5f7 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -39,6 +39,7 @@
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
+#define MDSTAT_STATE_MASK 0x1f
 
 /* Return nonzero iff the domain's clock is active */
 int __init davinci_psc_is_clk_active(unsigned int id)
@@ -53,14 +54,13 @@ int __init davinci_psc_is_clk_active(unsigned int id)
 /* Enable or disable a PSC domain */
 void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
-	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
 	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
-	if (enable)
-		mdctl |= 0x00000003;	/* Enable Module */
-	else
-		mdctl &= 0xFFFFFFE2;	/* Disable Module */
+	mdctl &= ~MDSTAT_STATE_MASK;
+	mdctl |= next_state;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
 	pdstat = __raw_readl(psc_base + PDSTAT);
@@ -93,12 +93,7 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 		} while (!(((ptstat >> domain) & 1) == 0));
 	}
 
-	if (enable)
-		mdstat_mask = 0x3;
-	else
-		mdstat_mask = 0x2;
-
 	do {
 		mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
-	} while (!((mdstat & 0x0000001F) == mdstat_mask));
+	} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
 }
-- 
GitLab


From 9e16469c83167d6869ad6cbe83312027ec529c64 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 14 Apr 2009 07:53:02 -0500
Subject: [PATCH 0935/1421] davinci: DM646x: add interrupt number and
 priorities

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/irqs.h | 52 +++++++++++++-
 arch/arm/mach-davinci/irq.c               | 83 +++++++++++++++++++++--
 2 files changed, 129 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index f4c5ca6da9f..9b0e412ebc2 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -96,10 +96,60 @@
 #define IRQ_EMUINT       63
 
 #define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		71
+#define DAVINCI_N_GPIO		104
 
 #define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
 
 #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
 
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0  0
+#define IRQ_DM646X_VP_VERTINT1  1
+#define IRQ_DM646X_VP_VERTINT2  2
+#define IRQ_DM646X_VP_VERTINT3  3
+#define IRQ_DM646X_VP_ERRINT    4
+#define IRQ_DM646X_RESERVED_1   5
+#define IRQ_DM646X_RESERVED_2   6
+#define IRQ_DM646X_WDINT        7
+#define IRQ_DM646X_CRGENINT0    8
+#define IRQ_DM646X_CRGENINT1    9
+#define IRQ_DM646X_TSIFINT0     10
+#define IRQ_DM646X_TSIFINT1     11
+#define IRQ_DM646X_VDCEINT      12
+#define IRQ_DM646X_USBINT       13
+#define IRQ_DM646X_USBDMAINT    14
+#define IRQ_DM646X_PCIINT       15
+#define IRQ_DM646X_TCERRINT2    20
+#define IRQ_DM646X_TCERRINT3    21
+#define IRQ_DM646X_IDE          22
+#define IRQ_DM646X_HPIINT       23
+#define IRQ_DM646X_EMACRXTHINT  24
+#define IRQ_DM646X_EMACRXINT    25
+#define IRQ_DM646X_EMACTXINT    26
+#define IRQ_DM646X_EMACMISCINT  27
+#define IRQ_DM646X_MCASP0TXINT  28
+#define IRQ_DM646X_MCASP0RXINT  29
+#define IRQ_DM646X_RESERVED_3   31
+#define IRQ_DM646X_MCASP1TXINT  32
+#define IRQ_DM646X_VLQINT       38
+#define IRQ_DM646X_UARTINT2     42
+#define IRQ_DM646X_SPINT0       43
+#define IRQ_DM646X_SPINT1       44
+#define IRQ_DM646X_DSP2ARMINT   45
+#define IRQ_DM646X_RESERVED_4   46
+#define IRQ_DM646X_PSCINT       47
+#define IRQ_DM646X_GPIO0        48
+#define IRQ_DM646X_GPIO1        49
+#define IRQ_DM646X_GPIO2        50
+#define IRQ_DM646X_GPIO3        51
+#define IRQ_DM646X_GPIO4        52
+#define IRQ_DM646X_GPIO5        53
+#define IRQ_DM646X_GPIO6        54
+#define IRQ_DM646X_GPIO7        55
+#define IRQ_DM646X_GPIOBNK0     56
+#define IRQ_DM646X_GPIOBNK1     57
+#define IRQ_DM646X_GPIOBNK2     58
+#define IRQ_DM646X_DDRINT       59
+#define IRQ_DM646X_AEMIFINT     60
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index e76835cf101..cf08ef2945e 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -25,6 +25,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/cputype.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
@@ -40,6 +41,8 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
+const u8 *davinci_def_priorities;
+
 #define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
 
 static inline unsigned int davinci_irq_readl(int offset)
@@ -110,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = {
 	.unmask = davinci_unmask_irq,
 };
 
-
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
 	[IRQ_VDINT0]		= 2,
 	[IRQ_VDINT1]		= 6,
 	[IRQ_VDINT2]		= 6,
@@ -179,11 +181,82 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
 	[IRQ_EMUINT]		= 7,
 };
 
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM646X_VP_VERTINT0]        = 7,
+	[IRQ_DM646X_VP_VERTINT1]        = 7,
+	[IRQ_DM646X_VP_VERTINT2]        = 7,
+	[IRQ_DM646X_VP_VERTINT3]        = 7,
+	[IRQ_DM646X_VP_ERRINT]          = 7,
+	[IRQ_DM646X_RESERVED_1]         = 7,
+	[IRQ_DM646X_RESERVED_2]         = 7,
+	[IRQ_DM646X_WDINT]              = 7,
+	[IRQ_DM646X_CRGENINT0]          = 7,
+	[IRQ_DM646X_CRGENINT1]          = 7,
+	[IRQ_DM646X_TSIFINT0]           = 7,
+	[IRQ_DM646X_TSIFINT1]           = 7,
+	[IRQ_DM646X_VDCEINT]            = 7,
+	[IRQ_DM646X_USBINT]             = 7,
+	[IRQ_DM646X_USBDMAINT]          = 7,
+	[IRQ_DM646X_PCIINT]             = 7,
+	[IRQ_CCINT0]                    = 7,    /* dma */
+	[IRQ_CCERRINT]                  = 7,    /* dma */
+	[IRQ_TCERRINT0]                 = 7,    /* dma */
+	[IRQ_TCERRINT]                  = 7,    /* dma */
+	[IRQ_DM646X_TCERRINT2]          = 7,
+	[IRQ_DM646X_TCERRINT3]          = 7,
+	[IRQ_DM646X_IDE]                = 7,
+	[IRQ_DM646X_HPIINT]             = 7,
+	[IRQ_DM646X_EMACRXTHINT]        = 7,
+	[IRQ_DM646X_EMACRXINT]          = 7,
+	[IRQ_DM646X_EMACTXINT]          = 7,
+	[IRQ_DM646X_EMACMISCINT]        = 7,
+	[IRQ_DM646X_MCASP0TXINT]        = 7,
+	[IRQ_DM646X_MCASP0RXINT]        = 7,
+	[IRQ_AEMIFINT]                  = 7,
+	[IRQ_DM646X_RESERVED_3]         = 7,
+	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
+	[IRQ_PWMINT0]                   = 7,
+	[IRQ_PWMINT1]                   = 7,
+	[IRQ_DM646X_VLQINT]             = 7,
+	[IRQ_I2C]                       = 7,
+	[IRQ_UARTINT0]                  = 7,
+	[IRQ_UARTINT1]                  = 7,
+	[IRQ_DM646X_UARTINT2]           = 7,
+	[IRQ_DM646X_SPINT0]             = 7,
+	[IRQ_DM646X_SPINT1]             = 7,
+	[IRQ_DM646X_DSP2ARMINT]         = 7,
+	[IRQ_DM646X_RESERVED_4]         = 7,
+	[IRQ_DM646X_PSCINT]             = 7,
+	[IRQ_DM646X_GPIO0]              = 7,
+	[IRQ_DM646X_GPIO1]              = 7,
+	[IRQ_DM646X_GPIO2]              = 7,
+	[IRQ_DM646X_GPIO3]              = 7,
+	[IRQ_DM646X_GPIO4]              = 7,
+	[IRQ_DM646X_GPIO5]              = 7,
+	[IRQ_DM646X_GPIO6]              = 7,
+	[IRQ_DM646X_GPIO7]              = 7,
+	[IRQ_DM646X_GPIOBNK0]           = 7,
+	[IRQ_DM646X_GPIOBNK1]           = 7,
+	[IRQ_DM646X_GPIOBNK2]           = 7,
+	[IRQ_DM646X_DDRINT]             = 7,
+	[IRQ_DM646X_AEMIFINT]           = 7,
+	[IRQ_COMMTX]                    = 7,
+	[IRQ_COMMRX]                    = 7,
+	[IRQ_EMUINT]                    = 7,
+};
+
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
 	unsigned i;
-	const u8 *priority = default_priorities;
+
+	if (cpu_is_davinci_dm644x())
+		davinci_def_priorities = dm644x_default_priorities;
+	else if (cpu_is_davinci_dm646x())
+		davinci_def_priorities = dm646x_default_priorities;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
@@ -211,8 +284,8 @@ void __init davinci_irq_init(void)
 		unsigned	j;
 		u32		pri;
 
-		for (j = 0, pri = 0; j < 32; j += 4, priority++)
-			pri |= (*priority & 0x07) << j;
+		for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+			pri |= (*davinci_def_priorities & 0x07) << j;
 		davinci_irq_writel(pri, i);
 	}
 
-- 
GitLab


From f9337405b21bafb1c1a24316b3e43b3d3d697925 Mon Sep 17 00:00:00 2001
From: "s-paulraj@ti.com" <s-paulraj@ti.com>
Date: Thu, 18 Sep 2008 15:35:00 -0400
Subject: [PATCH 0936/1421] davinci: DM355 IRQ Definitions

Adding IRQ defintions for DaVinci DM355 and default interrupt
priorities for DM355

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/irqs.h | 51 +++++++++++++++++
 arch/arm/mach-davinci/irq.c               | 67 +++++++++++++++++++++++
 2 files changed, 118 insertions(+)

diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 9b0e412ebc2..18066074c99 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -152,4 +152,55 @@
 #define IRQ_DM646X_DDRINT       59
 #define IRQ_DM646X_AEMIFINT     60
 
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0	0
+#define IRQ_DM355_CCDC_VDINT1	1
+#define IRQ_DM355_CCDC_VDINT2	2
+#define IRQ_DM355_IPIPE_HST	3
+#define IRQ_DM355_H3AINT	4
+#define IRQ_DM355_IPIPE_SDR	5
+#define IRQ_DM355_IPIPEIFINT	6
+#define IRQ_DM355_OSDINT	7
+#define IRQ_DM355_VENCINT	8
+#define IRQ_DM355_IMCOPINT	11
+#define IRQ_DM355_RTOINT	13
+#define IRQ_DM355_TINT4		13
+#define IRQ_DM355_TINT2_TINT12	13
+#define IRQ_DM355_UARTINT2	14
+#define IRQ_DM355_TINT5		14
+#define IRQ_DM355_TINT2_TINT34	14
+#define IRQ_DM355_TINT6		15
+#define IRQ_DM355_TINT3_TINT12	15
+#define IRQ_DM355_SPINT1_0	17
+#define IRQ_DM355_SPINT1_1	18
+#define IRQ_DM355_SPINT2_0	19
+#define IRQ_DM355_SPINT2_1	21
+#define IRQ_DM355_TINT7		22
+#define IRQ_DM355_TINT3_TINT34	22
+#define IRQ_DM355_SDIOINT0	23
+#define IRQ_DM355_MMCINT0	26
+#define IRQ_DM355_MSINT		26
+#define IRQ_DM355_MMCINT1	27
+#define IRQ_DM355_PWMINT3	28
+#define IRQ_DM355_SDIOINT1	31
+#define IRQ_DM355_SPINT0_0	42
+#define IRQ_DM355_SPINT0_1	43
+#define IRQ_DM355_GPIO0		44
+#define IRQ_DM355_GPIO1		45
+#define IRQ_DM355_GPIO2		46
+#define IRQ_DM355_GPIO3		47
+#define IRQ_DM355_GPIO4		48
+#define IRQ_DM355_GPIO5		49
+#define IRQ_DM355_GPIO6		50
+#define IRQ_DM355_GPIO7		51
+#define IRQ_DM355_GPIO8		52
+#define IRQ_DM355_GPIO9		53
+#define IRQ_DM355_GPIOBNK0	54
+#define IRQ_DM355_GPIOBNK1	55
+#define IRQ_DM355_GPIOBNK2	56
+#define IRQ_DM355_GPIOBNK3	57
+#define IRQ_DM355_GPIOBNK4	58
+#define IRQ_DM355_GPIOBNK5	59
+#define IRQ_DM355_GPIOBNK6	60
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index cf08ef2945e..5a324c90e29 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -248,6 +248,71 @@ static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_EMUINT]                    = 7,
 };
 
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM355_CCDC_VDINT0]		= 2,
+	[IRQ_DM355_CCDC_VDINT1]		= 6,
+	[IRQ_DM355_CCDC_VDINT2]		= 6,
+	[IRQ_DM355_IPIPE_HST]		= 6,
+	[IRQ_DM355_H3AINT]		= 6,
+	[IRQ_DM355_IPIPE_SDR]		= 6,
+	[IRQ_DM355_IPIPEIFINT]		= 6,
+	[IRQ_DM355_OSDINT]		= 7,
+	[IRQ_DM355_VENCINT]		= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM355_RTOINT]		= 4,
+	[IRQ_DM355_UARTINT2]		= 7,
+	[IRQ_DM355_TINT6]		= 7,
+	[IRQ_CCINT0]			= 5,	/* dma */
+	[IRQ_CCERRINT]			= 5,	/* dma */
+	[IRQ_TCERRINT0]			= 5,	/* dma */
+	[IRQ_TCERRINT]			= 5,	/* dma */
+	[IRQ_DM355_SPINT2_1]		= 7,
+	[IRQ_DM355_TINT7]		= 4,
+	[IRQ_DM355_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM355_MMCINT1]		= 7,
+	[IRQ_DM355_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 7,
+	[IRQ_AEMIFINT]			= 7,
+	[IRQ_DM355_SDIOINT1]		= 4,
+	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 7,
+	[IRQ_PWMINT2]			= 7,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM355_SPINT0_0]		= 3,
+	[IRQ_DM355_SPINT0_1]		= 3,
+	[IRQ_DM355_GPIO0]		= 3,
+	[IRQ_DM355_GPIO1]		= 7,
+	[IRQ_DM355_GPIO2]		= 4,
+	[IRQ_DM355_GPIO3]		= 4,
+	[IRQ_DM355_GPIO4]		= 7,
+	[IRQ_DM355_GPIO5]		= 7,
+	[IRQ_DM355_GPIO6]		= 7,
+	[IRQ_DM355_GPIO7]		= 7,
+	[IRQ_DM355_GPIO8]		= 7,
+	[IRQ_DM355_GPIO9]		= 7,
+	[IRQ_DM355_GPIOBNK0]		= 7,
+	[IRQ_DM355_GPIOBNK1]		= 7,
+	[IRQ_DM355_GPIOBNK2]		= 7,
+	[IRQ_DM355_GPIOBNK3]		= 7,
+	[IRQ_DM355_GPIOBNK4]		= 7,
+	[IRQ_DM355_GPIOBNK5]		= 7,
+	[IRQ_DM355_GPIOBNK6]		= 7,
+	[IRQ_COMMTX]			= 7,
+	[IRQ_COMMRX]			= 7,
+	[IRQ_EMUINT]			= 7,
+};
+
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
@@ -257,6 +322,8 @@ void __init davinci_irq_init(void)
 		davinci_def_priorities = dm644x_default_priorities;
 	else if (cpu_is_davinci_dm646x())
 		davinci_def_priorities = dm646x_default_priorities;
+	else if (cpu_is_davinci_dm355())
+		davinci_def_priorities = dm355_default_priorities;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
-- 
GitLab


From 617b925f94e0126841164ffd40dd3a8879502b57 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 08:04:26 -0500
Subject: [PATCH 0937/1421] davinci: serial: generalize for more SoCs

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/serial.h | 21 ++++-
 arch/arm/mach-davinci/serial.c              | 95 +++++++++++++++++----
 2 files changed, 96 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index fb8cb229bfd..632847d74a1 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -13,8 +13,23 @@
 
 #include <mach/io.h>
 
-#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS	3
+#define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU		0x0c
+#define UART_DM646X_SCR			0x10
+#define UART_DM646X_SCR_TX_WATERMARK	0x08
+
+struct davinci_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 3010f997125..69507579652 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -32,32 +32,47 @@
 #include <mach/hardware.h>
 #include <mach/serial.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include "clock.h"
 
-#define UART_DAVINCI_PWREMU 0x0c
-
-static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
-					  int offset)
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+					   int offset)
 {
 	offset <<= up->regshift;
-	return (unsigned int)__raw_readb(up->membase + offset);
+	return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
 }
 
-static inline void davinci_serial_outp(struct plat_serial8250_port *p,
-				       int offset, int value)
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+				    int value)
 {
 	offset <<= p->regshift;
-	__raw_writeb(value, p->membase + offset);
+	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
 }
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
-		.mapbase	= (unsigned long)DAVINCI_UART0_BASE,
+		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
-		.uartclk	= 27000000,
 	},
 	{
 		.flags		= 0
@@ -74,22 +89,68 @@ static struct platform_device serial_device = {
 
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 {
-	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
 	unsigned int pwremu = 0;
 
-	davinci_serial_outp(p, UART_IER, 0);  /* disable all interrupts */
+	serial_write_reg(p, UART_IER, 0);  /* disable all interrupts */
 
-	davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
 	mdelay(10);
 
 	pwremu |= (0x3 << 13);
 	pwremu |= 0x1;
-	davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+	if (cpu_is_davinci_dm646x())
+		serial_write_reg(p, UART_DM646X_SCR,
+				 UART_DM646X_SCR_TX_WATERMARK);
+}
+
+void __init davinci_serial_init(struct davinci_uart_config *info)
+{
+	int i;
+	char name[16];
+	struct clk *uart_clk;
+	struct device *dev = &serial_device.dev;
+
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on
+	 * if not needed.
+	 */
+	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
+		struct plat_serial8250_port *p = serial_platform_data + i;
+
+		if (!(info->enabled_uarts & (1 << i))) {
+			p->flags = 0;
+			continue;
+		}
+
+		if (cpu_is_davinci_dm646x())
+			p->iotype = UPIO_MEM32;
+
+		if (cpu_is_davinci_dm355()) {
+			if (i == 2) {
+				p->mapbase = (unsigned long)DM355_UART2_BASE;
+				p->irq = IRQ_DM355_UARTINT2;
+			}
+		}
+
+		sprintf(name, "uart%d", i);
+		uart_clk = clk_get(dev, name);
+		if (IS_ERR(uart_clk))
+			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+					__func__, __LINE__, i);
+		else {
+			clk_enable(uart_clk);
+			p->uartclk = clk_get_rate(uart_clk);
+			davinci_serial_reset(p);
+		}
+	}
 }
 
 static int __init davinci_init(void)
 {
-	davinci_serial_reset(&serial_platform_data[0]);
 	return platform_device_register(&serial_device);
 }
 
-- 
GitLab


From 5526b3f7e3317bdd0dcc0483214935ae64236efb Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 09:50:37 -0500
Subject: [PATCH 0938/1421] davinci: update pin-multiplexing support

Update MUX support to be more general and useful across multiple
SoCs in the DaVinci family.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig            |  26 +++
 arch/arm/mach-davinci/Makefile           |   4 +-
 arch/arm/mach-davinci/devices.c          |   5 +
 arch/arm/mach-davinci/include/mach/mux.h | 220 ++++++++++++++++++-----
 arch/arm/mach-davinci/mux.c              |  99 ++++++++--
 arch/arm/mach-davinci/mux.h              |  51 ++++++
 6 files changed, 339 insertions(+), 66 deletions(-)
 create mode 100644 arch/arm/mach-davinci/mux.h

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index af886734c73..f18090e78e3 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -18,6 +18,32 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DaVinci EVM
 
+
+config DAVINCI_MUX
+	bool "DAVINCI multiplexing support"
+	depends on ARCH_DAVINCI
+	default y
+	help
+	  Pin multiplexing support for DAVINCI boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config DAVINCI_MUX_DEBUG
+        bool "Multiplexing debug output"
+        depends on DAVINCI_MUX
+        help
+          Makes the multiplexing functions print out a lot of debug info.
+          This is useful if you want to find out the correct values of the
+          multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+        bool "Warn about pins the bootloader didn't set up"
+        depends on DAVINCI_MUX
+        help
+          Choose Y here to warn whenever driver initialization logic needs
+          to change the pin multiplexing setup.  When there are no warnings
+          printed, it's safe to deselect DAVINCI_MUX for your product.
+
 config DAVINCI_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 3ee3d73d956..b27871af4fc 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,9 @@
 
 # Common objects
 obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o mux.o devices.o dma.o usb.o
+			   gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 3ea6d477f06..a31370b93dd 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -21,6 +21,8 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
 
 #define DAVINCI_I2C_BASE	     0x01C21000
 
@@ -45,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
 
 void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 {
+	if (cpu_is_davinci_dm644x())
+		davinci_cfg_reg(DM644X_I2C);
+
 	davinci_i2c_device.dev.platform_data = pdata;
 	(void) platform_device_register(&davinci_i2c_device);
 }
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c24b6782804..bae22cb3e27 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -1,55 +1,183 @@
 /*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
  * 2007 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
  */
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0	0
-#define DAVINCI_MUX_AEAW1	1
-#define DAVINCI_MUX_AEAW2	2
-#define DAVINCI_MUX_AEAW3	3
-#define DAVINCI_MUX_AEAW4	4
-#define DAVINCI_MUX_AECS4	10
-#define DAVINCI_MUX_AECS5	11
-#define DAVINCI_MUX_VLYNQWD0	12
-#define DAVINCI_MUX_VLYNQWD1	13
-#define DAVINCI_MUX_VLSCREN	14
-#define DAVINCI_MUX_VLYNQEN	15
-#define DAVINCI_MUX_HDIREN	16
-#define DAVINCI_MUX_ATAEN	17
-#define DAVINCI_MUX_RGB666	22
-#define DAVINCI_MUX_RGB888	23
-#define DAVINCI_MUX_LOEEN	24
-#define DAVINCI_MUX_LFLDEN	25
-#define DAVINCI_MUX_CWEN	26
-#define DAVINCI_MUX_CFLDEN	27
-#define DAVINCI_MUX_HPIEN	29
-#define DAVINCI_MUX_1394EN	30
-#define DAVINCI_MUX_EMACEN	31
-
-#define DAVINCI_MUX_LEVEL2	32
-#define DAVINCI_MUX_UART0	(DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1	(DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2	(DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO	(DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0	(DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1	(DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2	(DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C		(DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI		(DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK	(DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP		(DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0	(DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1	(DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN	(DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+/* dm355 only */
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define INTMUX			0x18
+#define EVTMUX			0x1c
+
+struct mux_config {
+	const char *name;
+	const char *mux_reg_name;
+	const unsigned char mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+	const unsigned char mode;
+	bool debug;
+};
+
+enum davinci_dm644x_index {
+	/* ATA and HDDIR functions */
+	DM644X_HDIREN,
+	DM644X_ATAEN,
+	DM644X_ATAEN_DISABLE,
+
+	/* HPI functions */
+	DM644X_HPIEN_DISABLE,
+
+	/* AEAW functions */
+	DM644X_AEAW,
+
+	/* Memory Stick */
+	DM644X_MSTK,
+
+	/* I2C */
+	DM644X_I2C,
+
+	/* ASP function */
+	DM644X_MCBSP,
+
+	/* UART1 */
+	DM644X_UART1,
+
+	/* UART2 */
+	DM644X_UART2,
+
+	/* PWM0 */
+	DM644X_PWM0,
+
+	/* PWM1 */
+	DM644X_PWM1,
+
+	/* PWM2 */
+	DM644X_PWM2,
+
+	/* VLYNQ function */
+	DM644X_VLYNQEN,
+	DM644X_VLSCREN,
+	DM644X_VLYNQWD,
+
+	/* EMAC and MDIO function */
+	DM644X_EMACEN,
+
+	/* GPIO3V[0:16] pins */
+	DM644X_GPIO3V,
+
+	/* GPIO pins */
+	DM644X_GPIO0,
+	DM644X_GPIO3,
+	DM644X_GPIO43_44,
+	DM644X_GPIO46_47,
+
+	/* VPBE */
+	DM644X_RGB666,
+
+	/* LCD */
+	DM644X_LOEEN,
+	DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+	/* ATA function */
+	DM646X_ATAEN,
+
+	/* AUDIO Clock */
+	DM646X_AUDCK1,
+	DM646X_AUDCK0,
+
+	/* CRGEN Control */
+	DM646X_CRGMUX,
+
+	/* VPIF Control */
+	DM646X_STSOMUX_DISABLE,
+	DM646X_STSIMUX_DISABLE,
+	DM646X_PTSOMUX_DISABLE,
+	DM646X_PTSIMUX_DISABLE,
+
+	/* TSIF Control */
+	DM646X_STSOMUX,
+	DM646X_STSIMUX,
+	DM646X_PTSOMUX_PARALLEL,
+	DM646X_PTSIMUX_PARALLEL,
+	DM646X_PTSOMUX_SERIAL,
+	DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+	/* MMC/SD 0 */
+	DM355_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM355_SD1_CLK,
+	DM355_SD1_CMD,
+	DM355_SD1_DATA3,
+	DM355_SD1_DATA2,
+	DM355_SD1_DATA1,
+	DM355_SD1_DATA0,
+
+	/* I2C */
+	DM355_I2C_SDA,
+	DM355_I2C_SCL,
+
+	/* ASP0 function */
+	DM355_MCBSP0_BDX,
+	DM355_MCBSP0_X,
+	DM355_MCBSP0_BFSX,
+	DM355_MCBSP0_BDR,
+	DM355_MCBSP0_R,
+	DM355_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM355_SPI0_SDI,
+	DM355_SPI0_SDENA0,
+	DM355_SPI0_SDENA1,
+
+	/* IRQ muxing */
+	DM355_INT_EDMA_CC,
+	DM355_INT_EDMA_TC0_ERR,
+	DM355_INT_EDMA_TC1_ERR,
+
+	/* EDMA event muxing */
+	DM355_EVT8_ASP1_TX,
+	DM355_EVT9_ASP1_RX,
+	DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+				unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+				       unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 53734dee1f9..bbba0b247a4 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -1,42 +1,103 @@
 /*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
  * 2007 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
  */
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/spinlock.h>
 
 #include <mach/hardware.h>
-
 #include <mach/mux.h>
 
-/* System control register offsets */
-#define PINMUX0         0x00
-#define PINMUX1         0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+				unsigned long size)
+{
+	mux_table = pins;
+	pin_table_sz = size;
 
-static DEFINE_SPINLOCK(mux_lock);
+	return 0;
+}
 
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
+	static DEFINE_SPINLOCK(mux_spin_lock);
 	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
-	u32 pinmux, muxreg = PINMUX0;
+	unsigned long flags;
+	const struct mux_config *cfg;
+	unsigned int reg_orig = 0, reg = 0;
+	unsigned int mask, warn = 0;
+
+	if (!mux_table)
+		BUG();
+
+	if (index >= pin_table_sz) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, pin_table_sz);
+		dump_stack();
+		return -ENODEV;
+	}
+
+	cfg = &mux_table[index];
+
+	if (cfg->name == NULL) {
+		printk(KERN_ERR "No entry for the specified index\n");
+		return -ENODEV;
+	}
+
+	/* Update the mux register in question */
+	if (cfg->mask) {
+		unsigned	tmp1, tmp2;
+
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		reg_orig = __raw_readl(base + cfg->mux_reg);
+
+		mask = (cfg->mask << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mode << cfg->mask_offset);
+		reg |= tmp2;
+
+		if (tmp1 != tmp2)
+			warn = 1;
+
+		__raw_writel(reg, base + cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+	}
 
-	if (mux >= DAVINCI_MUX_LEVEL2) {
-		muxreg = PINMUX1;
-		mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+	if (cfg->debug || warn) {
+		printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+		printk(KERN_WARNING "	   %s (0x%08x) = 0x%08x -> 0x%08x\n",
+		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
 	}
+#endif
 
-	spin_lock(&mux_lock);
-	pinmux = __raw_readl(base + muxreg);
-	if (enable)
-		pinmux |= (1 << mux);
-	else
-		pinmux &= ~(1 << mux);
-	__raw_writel(pinmux, base + muxreg);
-	spin_unlock(&mux_lock);
+	return 0;
 }
+EXPORT_SYMBOL(davinci_cfg_reg);
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
new file mode 100644
index 00000000000..adc86941337
--- /dev/null
+++ b/arch/arm/mach-davinci/mux.h
@@ -0,0 +1,51 @@
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = {							\
+			.name =  #desc,					\
+			.debug = dbg,					\
+			.mux_reg_name = "PINMUX"#muxreg,		\
+			.mux_reg = PINMUX##muxreg,			\
+			.mask_offset = mode_offset,			\
+			.mask = mode_mask,				\
+			.mode = mux_mode,				\
+		},
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg)	\
+[soc##_##desc] = {							\
+			.name =  #desc,					\
+			.debug = dbg,					\
+			.mux_reg_name = "INTMUX",			\
+			.mux_reg = INTMUX,				\
+			.mask_offset = mode_offset,			\
+			.mask = mode_mask,				\
+			.mode = mux_mode,				\
+		},
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg)	\
+[soc##_##desc] = {							\
+			.name =  #desc,					\
+			.debug = dbg,					\
+			.mux_reg_name = "EVTMUX",			\
+			.mux_reg = EVTMUX,				\
+			.mask_offset = mode_offset,			\
+			.mask = mode_mask,				\
+			.mode = mux_mode,				\
+		},
+
+#endif /* _MACH_DAVINCI_MUX_H */
-- 
GitLab


From 73d3c68f09e608be983013dc8b3e49aebe89298c Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 10:57:40 -0500
Subject: [PATCH 0939/1421] davinci: DM644x: rename board file

Rename DM6446 EVM board file, no functional changes.  Code is updated
and reworked in following patch.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/{board-evm.c => board-dm644x-evm.c} | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename arch/arm/mach-davinci/{board-evm.c => board-dm644x-evm.c} (100%)

diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
similarity index 100%
rename from arch/arm/mach-davinci/board-evm.c
rename to arch/arm/mach-davinci/board-dm644x-evm.c
-- 
GitLab


From d0e47fba054a55e0066c6ae2c807d98d086af5a9 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 14 Apr 2009 11:30:11 -0500
Subject: [PATCH 0940/1421] davinci: update DM644x support in preparation for
 more SoCs

Rework DM644x code into SoC specific and board specific parts.
This is also to generalize the structure a bit so it's easier to add
support for new SoCs in the DaVinci family.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig                 |   9 +-
 arch/arm/mach-davinci/Makefile                |   5 +-
 arch/arm/mach-davinci/board-dm644x-evm.c      | 292 +++++++++--
 arch/arm/mach-davinci/dm644x.c                | 461 ++++++++++++++++++
 .../include/mach/board-dm6446evm.h            |  20 +
 arch/arm/mach-davinci/include/mach/common.h   |   6 +
 arch/arm/mach-davinci/include/mach/dm644x.h   |  37 ++
 7 files changed, 791 insertions(+), 39 deletions(-)
 create mode 100644 arch/arm/mach-davinci/dm644x.c
 create mode 100644 arch/arm/mach-davinci/include/mach/board-dm6446evm.h
 create mode 100644 arch/arm/mach-davinci/include/mach/dm644x.h

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index f18090e78e3..a9c78bc72b8 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,19 +4,18 @@ menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI644x
-	default y
+config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
-	bool "TI DaVinci EVM"
+	bool "TI DM644x EVM"
 	default y
-	depends on ARCH_DAVINCI644x
+	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
-	  for development is a DaVinci EVM
+	  for development is a DM644x EVM
 
 
 config DAVINCI_MUX
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index b27871af4fc..1674661942f 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -9,5 +9,8 @@ obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+
 # Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index c2701d740a1..5387e6b2040 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -15,15 +15,19 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/memory.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -32,28 +36,34 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
+#include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
+
+#define DM644X_EVM_PHY_MASK		(0x2)
+#define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
 #define DAVINCI_CFC_ATA_BASE		  0x01C66000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
 
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE  0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE  0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE  0x08000000
 
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define LXT971_PHY_ID	(0x001378e2)
+#define LXT971_PHY_MASK	(0xfffffff0)
 
 static struct mtd_partition davinci_evm_norflash_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 4 sectors */
+	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
 	{
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 4 * SZ_64K,
+		.size		= 5 * SZ_64K,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	},
 	/* bootloader params in the next 1 sectors */
@@ -103,10 +113,60 @@ static struct platform_device davinci_evm_norflash_device = {
 	.resource	= &davinci_evm_norflash_resource,
 };
 
-#endif
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+	/* 5 MB space at the beginning for bootloader and kernel */
+	{
+		.name		= "NAND filesystem",
+		.offset		= 5 * SZ_1M,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+	.parts		= davinci_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
+	.resource	= davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_32BIT_MASK;
+
+static struct platform_device davinci_fb_device = {
+	.name		= "davincifb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &davinci_fb_dma_mask,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
+	},
+	.num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+	.name           = "rtc_davinci_evm",
+	.id             = -1,
+};
 
 static struct resource ide_resources[] = {
 	{
@@ -121,7 +181,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
+static u64 ide_dma_mask = DMA_32BIT_MASK;
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -130,12 +190,10 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 };
 
-#endif
-
 /*----------------------------------------------------------------------*/
 
 /*
@@ -314,7 +372,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	gpio_request(gpio + 7, "nCF_SEL");
 	gpio_direction_output(gpio + 7, 1);
 
-	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+	/* irlml6401 switches over 1A, in under 8 msec;
+	 * now it can be managed by nDRV_VBUS ...
+	 */
 	setup_usb(500, 8);
 
 	return 0;
@@ -346,13 +406,119 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+	DECLARE_MAC_BUF(mac_str);
+	char mac_addr[6];
+
+	at24_mem_acc = mem_acc;
+
+	/* Read MAC addr from EEPROM */
+	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+		       print_mac(mac_str, mac_addr));
+	}
+}
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
+	.setup          = at24_setup,
+};
+
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+	if (at24_mem_acc)
+		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+	if (at24_mem_acc)
+		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more.  It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	dm6446evm_msp = client;
+	return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+	dm6446evm_msp = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+	{ "dm6446evm_msp", 0, },
+	{ /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+	.driver.name	= "dm6446evm_msp",
+	.id_table	= dm6446evm_msp_ids,
+	.probe		= dm6446evm_msp_probe,
+	.remove		= dm6446evm_msp_remove,
 };
 
+static int dm6444evm_msp430_get_pins(void)
+{
+	static const char txbuf[2] = { 2, 4, };
+	char buf[4];
+	struct i2c_msg msg[2] = {
+		{
+			.addr = dm6446evm_msp->addr,
+			.flags = 0,
+			.len = 2,
+			.buf = (void __force *)txbuf,
+		},
+		{
+			.addr = dm6446evm_msp->addr,
+			.flags = I2C_M_RD,
+			.len = 4,
+			.buf = buf,
+		},
+	};
+	int status;
+
+	if (!dm6446evm_msp)
+		return -ENXIO;
+
+	/* Command 4 == get input state, returns port 2 and port3 data
+	 *   S Addr W [A] len=2 [A] cmd=4 [A]
+	 *   RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+	 */
+	status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+	if (status < 0)
+		return status;
+
+	dev_dbg(&dm6446evm_msp->dev,
+		"PINS: %02x %02x %02x %02x\n",
+		buf[0], buf[1], buf[2], buf[3]);
+
+	return (buf[3] << 8) | buf[2];
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+	},
 	{
 		I2C_BOARD_INFO("pcf8574", 0x38),
 		.platform_data	= &pcf_data_u2,
@@ -371,7 +537,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	/* ALSO:
 	 * - tvl320aic33 audio codec (0x1b)
-	 * - msp430 microcontroller (0x23)
 	 * - tvp5146 video decoder (0x5d)
 	 */
 };
@@ -387,40 +552,101 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6446evm_msp_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
 static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-	&davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-	&ide_dev,
-#endif
+	&davinci_fb_device,
+	&rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
 };
 
 static void __init
 davinci_evm_map_io(void)
 {
 	davinci_map_common_io();
+	dm644x_init();
 }
 
-static __init void davinci_evm_init(void)
+static int davinci_phy_fixup(struct phy_device *phydev)
 {
+	unsigned int control;
+	/* CRITICAL: Fix for increasing PHY signal drive strength for
+	 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+	 * signal strength was low causing  TX to fail randomly. The
+	 * fix is to Set bit 11 (Increased MII drive strength) of PHY
+	 * register 26 (Digital Config register) on this phy. */
+	control = phy_read(phydev, 26);
+	phy_write(phydev, 26, (control | 0x800));
+	return 0;
+}
+
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || \
     defined(CONFIG_MTD_PHYSMAP_MODULE)
-	printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
-	       "but share pins.\n\t Disable IDE for NOR support.\n");
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
 #endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+    defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
 #endif
 
+static __init void davinci_evm_init(void)
+{
+	struct clk *aemif_clk;
+
+	aemif_clk = clk_get(NULL, "aemif");
+	clk_enable(aemif_clk);
+
+	if (HAS_ATA) {
+		if (HAS_NAND || HAS_NOR)
+			pr_warning("WARNING: both IDE and Flash are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable IDE for NAND/NOR support.\n");
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+		platform_device_register(&ide_dev);
+	} else if (HAS_NAND || HAS_NOR) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+		/* only one device will be jumpered and detected */
+		if (HAS_NAND) {
+			platform_device_register(&davinci_evm_nandflash_device);
+			evm_leds[7].default_trigger = "nand-disk";
+			if (HAS_NOR)
+				pr_warning("WARNING: both NAND and NOR flash "
+					"are enabled; disable one of them.\n");
+		} else if (HAS_NOR)
+			platform_device_register(&davinci_evm_norflash_device);
+	}
+
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
+
+	davinci_serial_init(&uart_config);
+
+	/* Register the fixup for PHY on DaVinci */
+	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+					davinci_phy_fixup);
+
 }
 
 static __init void davinci_evm_irq_init(void)
@@ -428,7 +654,7 @@ static __init void davinci_evm_irq_init(void)
 	davinci_irq_init();
 }
 
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
new file mode 100644
index 00000000000..d428ef192ea
--- /dev/null
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -0,0 +1,461 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ		27000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name = "pll2_sysclk2",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_GEM,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+	.name = "vicp",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk3,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk3,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+	.name = "mmcsd",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+	.name = "spi",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+	.name = "vlynq",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "vicp", &vicp_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
+	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+	CLK(NULL, "spi", &spi_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, "vlynq", &vlynq_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+	{
+		.start	= DM644X_EMAC_BASE,
+		.end	= DM644X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_EMACINT,
+		.end   = IRQ_EMACINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm644x_emac_device = {
+       .name		= "davinci_emac",
+       .id		= 1,
+       .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
+       .resource	= dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
+MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
+MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
+
+MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
+
+MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
+
+MUX_CFG(DM644X, I2C,		1,   7,     1,	  1,	 false)
+
+MUX_CFG(DM644X, MCBSP,		1,   10,    1,	  1,	 false)
+
+MUX_CFG(DM644X, UART1,		1,   1,     1,	  1,	 true)
+MUX_CFG(DM644X, UART2,		1,   2,     1,	  1,	 true)
+
+MUX_CFG(DM644X, PWM0,		1,   4,     1,	  1,	 false)
+
+MUX_CFG(DM644X, PWM1,		1,   5,     1,	  1,	 false)
+
+MUX_CFG(DM644X, PWM2,		1,   6,     1,	  1,	 false)
+
+MUX_CFG(DM644X, VLYNQEN,	0,   15,    1,	  1,	 false)
+MUX_CFG(DM644X, VLSCREN,	0,   14,    1,	  1,	 false)
+MUX_CFG(DM644X, VLYNQWD,	0,   12,    3,	  3,	 false)
+
+MUX_CFG(DM644X, EMACEN,		0,   31,    1,	  1,	 true)
+
+MUX_CFG(DM644X, GPIO3V,		0,   31,    1,	  0,	 true)
+
+MUX_CFG(DM644X, GPIO0,		0,   24,    1,	  0,	 true)
+MUX_CFG(DM644X, GPIO3,		0,   25,    1,	  0,	 false)
+MUX_CFG(DM644X, GPIO43_44,	1,   7,     1,	  0,	 false)
+MUX_CFG(DM644X, GPIO46_47,	0,   22,    1,	  0,	 true)
+
+MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
+
+MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
+MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+	 0,  1, 12, 13, 14,
+	15, 25, 30, 31, 45,
+	46, 47, 55, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm644x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+	davinci_clk_init(dm644x_clks);
+	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm644x())
+		return 0;
+
+	platform_device_register(&dm644x_edma_device);
+	return 0;
+}
+postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
new file mode 100644
index 00000000000..3216f21c123
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 4b522e5c70e..19177097625 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -16,6 +16,12 @@ struct sys_timer;
 
 extern struct sys_timer davinci_timer;
 
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
new file mode 100644
index 00000000000..3dcb9f4e58b
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -0,0 +1,37 @@
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE		(0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM644X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */
-- 
GitLab


From 3e9c18e1dc71b9a0fac302e2defe99d850ad3d79 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 15 Apr 2009 14:19:21 -0500
Subject: [PATCH 0941/1421] davinci: DM644x: NAND: update partitioning

Update NAND partitioning for the dm6446 evm, unmasking the hidden
data at the beginning and letting the kernel be updated from Linux.

 - This is boot-compatible with TI's software (U-Boot 1.20 and both
   the 2.6.10 and 2.6.18 kernels), in terms of startup and loading
   kernels from flash.

 - In the same way, it's also boot-compatible with mainline U-Boot,
   which stores U-Boot params in block 0 not block 16.

 - It's not quite compatible with systems that previously used NAND
   partitions to hold (filesystem) data.  The compatibilities are a
   bit different based on which kernel was used previously
     + Users of TI/MV kernels no longer see mtd2 "params"
       (mainline u-boot env is in a different place)
	* Filesystem is now mtd2 ... vs mtd3
     + Users of GIT kernels now see mtd0 and mtd1 partitions
	* Filesystem partition starts 640 KBytes earlier
	* Filesystem is now mtd2 ... vs mtd0
     * Linux now *uses* the flash-resident BBT
	* Removes annoying slowdown/hiccup during boot
	* Potentially ~64KB less space available with TI/MV kernels

If you *used* NAND partitions from Linux, there is no solution that's
fully compatible with all previous kernels in those respects ... ergo
this "best compromise".  It'd be good to back back up the filesystem
data; or, carry your own backwards-compatibility patch for awhile.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 42 ++++++++++++++++++++----
 1 file changed, 36 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 5387e6b2040..c039674fe99 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,11 +16,12 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
+#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -113,20 +114,49 @@ static struct platform_device davinci_evm_norflash_device = {
 	.resource	= &davinci_evm_norflash_resource,
 };
 
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
 struct mtd_partition davinci_evm_nandflash_partition[] = {
-	/* 5 MB space at the beginning for bootloader and kernel */
+	/* Bootloader layout depends on whose u-boot is installed, but we
+	 * can hide all the details.
+	 *  - block 0 for u-boot environment ... in mainline u-boot
+	 *  - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+	 *  - blocks 6...? for u-boot
+	 *  - blocks 16..23 for u-boot environment ... in TI's u-boot
+	 */
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_256K + SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* Kernel */
 	{
-		.name		= "NAND filesystem",
-		.offset		= 5 * SZ_1M,
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	},
+	/* File system (older GIT kernels started this on the 5MB mark) */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
 		.size		= MTDPART_SIZ_FULL,
 		.mask_flags	= 0,
 	}
+	/* A few blocks at end hold a flash BBT ... created by TI's CCS
+	 * using flashwriter_nand.out, but ignored by TI's versions of
+	 * Linux and u-boot.  We boot faster by using them.
+	 */
 };
 
 static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
 };
 
 static struct resource davinci_evm_nandflash_resource[] = {
@@ -151,14 +181,14 @@ static struct platform_device davinci_evm_nandflash_device = {
 	.resource	= davinci_evm_nandflash_resource,
 };
 
-static u64 davinci_fb_dma_mask = DMA_32BIT_MASK;
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device davinci_fb_device = {
 	.name		= "davincifb",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 	},
 	.num_resources = 0,
 };
-- 
GitLab


From 7b1a14bbb0e547aaa4d30cc376e6c8c12539ab0f Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 27 Apr 2009 10:49:53 -0400
Subject: [PATCH 0942/1421] Btrfs: fix acl caching

Linus noticed the btrfs code to cache acls wasn't properly caching
a NULL acl when the inode didn't have any acls.  This meant the common
case of no acls resulted in expensive btree searches every time the
kernel checked permissions (which is quite often).

This is a modified version of Linus' original patch:

Properly set initial acl fields to BTRFS_ACL_NOT_CACHED in the inode.
This forces an acl lookup when permission checks are done.

Fix btrfs_get_acl to avoid lookups and locking when the inode acls fields
are set to null.

Fix btrfs_get_acl to use the right return value from __btrfs_getxattr
when deciding to cache a NULL acl.  It was storing a NULL acl when
__btrfs_getxattr return -ENOENT, but __btrfs_getxattr was actually returning
-ENODATA for this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/acl.c   | 18 +++++++++++++-----
 fs/btrfs/inode.c |  4 ++--
 2 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 7fdd184a528..cbba000dccb 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -60,15 +60,20 @@ static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
 		return ERR_PTR(-EINVAL);
 	}
 
+	/* Handle the cached NULL acl case without locking */
+	acl = ACCESS_ONCE(*p_acl);
+	if (!acl)
+		return acl;
+
 	spin_lock(&inode->i_lock);
-	if (*p_acl != BTRFS_ACL_NOT_CACHED)
-		acl = posix_acl_dup(*p_acl);
+	acl = *p_acl;
+	if (acl != BTRFS_ACL_NOT_CACHED)
+		acl = posix_acl_dup(acl);
 	spin_unlock(&inode->i_lock);
 
-	if (acl)
+	if (acl != BTRFS_ACL_NOT_CACHED)
 		return acl;
 
-
 	size = __btrfs_getxattr(inode, name, "", 0);
 	if (size > 0) {
 		value = kzalloc(size, GFP_NOFS);
@@ -80,9 +85,12 @@ static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
 			btrfs_update_cached_acl(inode, p_acl, acl);
 		}
 		kfree(value);
-	} else if (size == -ENOENT) {
+	} else if (size == -ENOENT || size == -ENODATA || size == 0) {
+		/* FIXME, who returns -ENOENT?  I think nobody */
 		acl = NULL;
 		btrfs_update_cached_acl(inode, p_acl, acl);
+	} else {
+		acl = ERR_PTR(-EIO);
 	}
 
 	return acl;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 98bd5069d54..dc812ec551f 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3047,8 +3047,8 @@ static noinline void init_btrfs_i(struct inode *inode)
 {
 	struct btrfs_inode *bi = BTRFS_I(inode);
 
-	bi->i_acl = NULL;
-	bi->i_default_acl = NULL;
+	bi->i_acl = BTRFS_ACL_NOT_CACHED;
+	bi->i_default_acl = BTRFS_ACL_NOT_CACHED;
 
 	bi->generation = 0;
 	bi->sequence = 0;
-- 
GitLab


From 46a53cca826e71effe59e3cb4f383622c33ebdcb Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Mon, 27 Apr 2009 11:47:50 -0400
Subject: [PATCH 0943/1421] Btrfs: look for acls during btrfs_read_locked_inode

This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items.
If it is certain a given inode has no acls, it will set the in memory acl
fields to null to avoid acl lookups completely.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index dc812ec551f..90c23eb2882 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2015,6 +2015,57 @@ void btrfs_orphan_cleanup(struct btrfs_root *root)
 	btrfs_free_path(path);
 }
 
+/*
+ * very simple check to peek ahead in the leaf looking for xattrs.  If we
+ * don't find any xattrs, we know there can't be any acls.
+ *
+ * slot is the slot the inode is in, objectid is the objectid of the inode
+ */
+static noinline int acls_after_inode_item(struct extent_buffer *leaf,
+					  int slot, u64 objectid)
+{
+	u32 nritems = btrfs_header_nritems(leaf);
+	struct btrfs_key found_key;
+	int scanned = 0;
+
+	slot++;
+	while (slot < nritems) {
+		btrfs_item_key_to_cpu(leaf, &found_key, slot);
+
+		/* we found a different objectid, there must not be acls */
+		if (found_key.objectid != objectid)
+			return 0;
+
+		/* we found an xattr, assume we've got an acl */
+		if (found_key.type == BTRFS_XATTR_ITEM_KEY)
+			return 1;
+
+		/*
+		 * we found a key greater than an xattr key, there can't
+		 * be any acls later on
+		 */
+		if (found_key.type > BTRFS_XATTR_ITEM_KEY)
+			return 0;
+
+		slot++;
+		scanned++;
+
+		/*
+		 * it goes inode, inode backrefs, xattrs, extents,
+		 * so if there are a ton of hard links to an inode there can
+		 * be a lot of backrefs.  Don't waste time searching too hard,
+		 * this is just an optimization
+		 */
+		if (scanned >= 8)
+			break;
+	}
+	/* we hit the end of the leaf before we found an xattr or
+	 * something larger than an xattr.  We have to assume the inode
+	 * has acls
+	 */
+	return 1;
+}
+
 /*
  * read an inode from the btree into the in-memory inode
  */
@@ -2026,6 +2077,7 @@ void btrfs_read_locked_inode(struct inode *inode)
 	struct btrfs_timespec *tspec;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_key location;
+	int maybe_acls;
 	u64 alloc_group_block;
 	u32 rdev;
 	int ret;
@@ -2072,6 +2124,16 @@ void btrfs_read_locked_inode(struct inode *inode)
 
 	alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
 
+	/*
+	 * try to precache a NULL acl entry for files that don't have
+	 * any xattrs or acls
+	 */
+	maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino);
+	if (!maybe_acls) {
+		BTRFS_I(inode)->i_acl = NULL;
+		BTRFS_I(inode)->i_default_acl = NULL;
+	}
+
 	BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0,
 						alloc_group_block, 0);
 	btrfs_free_path(path);
-- 
GitLab


From 28853da20c840f0d147674ac850c539d3306109f Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Mon, 27 Apr 2009 17:24:28 +0100
Subject: [PATCH 0944/1421] powerpc/86xx: Add device_type entry to soc for
 ppc9a

The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase()
to return the correct address.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/gef_ppc9a.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index d47ad071875..53a7a625590 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -161,6 +161,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
+		device_type = "soc";
 		compatible = "fsl,mpc8641-soc", "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
 		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
-- 
GitLab


From 802b352f2934f799ec2e159f61db6506094a936e Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 27 Apr 2009 21:24:28 -0700
Subject: [PATCH 0945/1421] ecryptfs: fix printk format warning

fs/ecryptfs/inode.c:670: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 fs/ecryptfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 93bc0f8174a..1940edd0830 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -667,7 +667,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 	lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
 	if (lower_buf == NULL) {
 		printk(KERN_ERR "%s: Out of memory whilst attempting to "
-		       "kmalloc [%d] bytes\n", __func__, lower_bufsiz);
+		       "kmalloc [%zd] bytes\n", __func__, lower_bufsiz);
 		rc = -ENOMEM;
 		goto out;
 	}
-- 
GitLab


From ac20100df7a7a042423dcb8847f42d9f6ddb8d00 Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Mon, 27 Apr 2009 13:31:12 -0500
Subject: [PATCH 0946/1421] eCryptfs: Fix min function comparison warning

This warning shows up on 64 bit builds:

fs/ecryptfs/inode.c:693: warning: comparison of distinct pointer types
lacks a cast

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
---
 fs/ecryptfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 1940edd0830..2f0945d6329 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -690,7 +690,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 		}
 		/* Check for bufsiz <= 0 done in sys_readlinkat() */
 		rc = copy_to_user(buf, plaintext_name,
-				  min((unsigned) bufsiz, plaintext_name_size));
+				  min((size_t) bufsiz, plaintext_name_size));
 		if (rc)
 			rc = -EFAULT;
 		else
-- 
GitLab


From 3d4f16348b77efbf81b7fa186a18a0eb815b6b84 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 27 Apr 2009 12:00:27 -0700
Subject: [PATCH 0947/1421] Revert "linux.conf.au 2009: Tuz"

This reverts commit 8032b526d1a3bd91ad633dd3a3b5fdbc47ad54f1.

Hey, it was only meant to be a single release.  Now they can all die as
far as I'm concerned.

[ Just kidding.  They're cute and cuddly.

  Except when they have horrible nasty facial diseases.  Oh, and I guess
  they're not actually that cuddly even when disease-free. ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/logo.gif                    |  Bin 0 -> 16335 bytes
 Documentation/logo.svg                    | 2911 --------------
 Documentation/logo.txt                    |   15 +-
 drivers/video/logo/logo_linux_clut224.ppm | 4428 ++++++++-------------
 drivers/video/logo/logo_linux_vga16.ppm   | 4339 ++++++++------------
 5 files changed, 3216 insertions(+), 8477 deletions(-)
 create mode 100644 Documentation/logo.gif
 delete mode 100644 Documentation/logo.svg

diff --git a/Documentation/logo.gif b/Documentation/logo.gif
new file mode 100644
index 0000000000000000000000000000000000000000..2eae75fecfb965f49065c680063a40c594736ee5
GIT binary patch
literal 16335
zcmWk!c|6nqAOGyI4Ks7kJ<NSg#B$DkB<2cH%~h_nBvz?5=bRyxN;OxlLL+IFH1`}a
zXNYnYNm@lo<@@XR{_FjIJl^le>-l`WUeEXOc)wiTT?l)^Kp<n#PXJ(1&;p(`iv~qQ
zp(FyZHb6k5p#r{iv>U)?Kn0W7l>r?R9$-;{Xg37E2u;Ex=Bm-OAYf|}zr`akX;6OC
zziDV440N&@Ef~N~vViF5XjZBchXLg>(9HZKS`fkw4=fE}t7+D5cm&xKx-m&wVWY`p
zay0`QO$5l~ATAA!#XysSpez<^jswt0Kr{(2n8dJHOd1J+MMIfP=Ej&C5f2R_0AwOS
zB>_P}L4rvFg+gIcfH@9=U0cne0*oMFg@<U$K$ENuwm6769-@p4Fc=J~8`RCsjY&Z;
zsFbY%X^iwgY)UIE^vZyASu{W*Ac~5L$mD3sKh|va24ANr8Y*BTC=_ZC0YM}Z$wUOj
z4N*h}C`9NA2Y~~iTpGZoAsA#}j*Tdb{?|be2!s_Du);!+NF*u=u{DVe!b8i-%J6tR
zjYea!*v#mEm?I~fpgaZ;O+?Hw0bV|uUxp^&usS+AWCE1IC~|Wn7LgH*e;y-1SrmXn
z19(LM27}p}l;$#kIez}i$_g|3Um$?V$w?Lk!Dk=@JOq=B;1)qy|1k3r6cTi@3{8uK
zQmIrn4azG*%*{>C&CLlW5ok1evItGo0f;&XCbKr5jOUmAGl5uYL6?#L(IoK85R+v9
z0s#~SL9tluWD$Z*1rPv~P5I|81eHSO^ZC&vs6enHSXpCJ|8cZNAP}9^Ns~-~NWi)2
zK<8KhK?gd?L=do0E|<GC@DC~ihr=+Up(|`)g^y^-x8^baaYwAI2v}6a3LC+rA?8>J
ztP*;%3^B)r(rD!ZHkwI=3RWf!a8L#bx;2StDub>J0B&w14u>P)ASNeQ1YE=x8!^d3
z=;#prouC{lqO+-*UkzR1B6vLBWUX0g5_F4&5OC029CRo1ADB4+0JgXYfk3d)!T^BO
zf1`g*ZAT(0ItuIRzK?`W2|J06j!KLI)P6xh0I&lX{96M2Unl@#2ly+j<i=*Ur6Z*D
zLV4_pj;vqm9_4N(?>h1@rm-`;hN_;6Sd;xq?up^NOFDk{Lwk2c_FlznG?%+Sy7TG=
zB4TwW=h5Av+eEo_r2~mT7t`&MUVwX(?obV>%EOt!WsN?--;JHUF8v^|1Tx55@@S6l
zH{Jj8zGh5w-J8O=#UtnTK1pzR8bmKv7eY>kKBs+JICcMOG1mSO=IdWYj>+pbFL#sc
zQAckoS|uNOrM@}Ruzas5=ZEI*z5Hi{`tpp1@-ovmL+s)#S;K3I6$IPFs$>nfhIhpc
z=|9W&y<sbB+Y)q^(LKUnUcJ;8xovxCi$9z-OK=BuO63?FUf9WK7(Hu3SzYlt@X{!_
zNHI~#`n39zuIR~$+{1U@iKp274*rB&7M9K6_k^kqy-!iOfXrQb=f%Z`yJC80+d5MZ
z<K?=eUYLx$P7}*w@zc>RgbHyY{zSGm5tvV>CJ6Q)O47=Sj_|^*I!&Ljr6%^|8nsj9
zPq%(dSuEbOS}hkPod`hTXSSFJ@|V<L$_0|j_iF6iyPKABe7e=DFJIR^qQVH-HCc1@
zlCUIfkC&(Wq44~%r?0Qch!x#o#I^gEo%KKBvK)Ty9B=a0$IW2L<QiocZ9I(pOS&>g
z@7c<sQ`5cIs-1ie+^dn1IkSAI+_L8G-BG$n2`h6UGxq+@{lcZI71WzwV<`>wr{m(E
zCO_4Wf3dwC7xAlFruIUI<k@)J8q}3|a{n$xiMk4#IJvND^Rwg8Da~5)krN_!H11rJ
zbyteH({(~YBQbMtpl4O`*)nC71pQ;44FkRiv@U0UI&i&pv*b{!%=GKXrP@nVFEuS6
zAD7i-i&D794(8r<;tniyXWcmXx;CS1%BL8sgrCo7Ht`8HahHqua|3J38E&|WyPP~P
zN4U_o5GGkXQiYAZ7dmlYy7*4;HOZ;scFQ#8KumZBD_TwV6qzoRXZaI(^hJ>HKG~L~
z$YLRSO5};`PTNPs<B!H%IuU9?__mC3!q`Cw3eTlj?4Tu|w$Wc6I{g>piGJtfI!hoI
zpK_|sFj09EG${FVCcA@{BF5sfop-&D2c`2Qd?u1!r^RiK7@VmN%Kq@aG~H2oc3<Qq
zS9(ffx6~>B^<T0rS1);5Kf^6PRcze5=Kt}|)oQr#t;j=O*1Z%Igzky4+xrOl(C^gx
zskpb#zdXx$xYs(Q^K++DmFmS7{|D0&s(RFTiJ?FI<HcJSnJ1N3osxNVzkd#=-!jrN
z$=RMKCagqEk|ugui}C8HV3wlFEsK{c6_rW>9q*b*S1w8iu~4lK$e=EZ9FW69r7L+M
zN)zo|7OxL=m<vWNxVEkAQ<r{5h5lIwEN>F#(|7P?P~4BN7u6Mp8AW9o8z{mPP7_79
zF^&1XnN;Ym^fk9P$kjl0cd;?v{=8#LB_@v}{;{_}*ef+WP_G?<BGYqwF;$qMyO)CT
zYVr=HRVvOts0V8J=-5&*#h0{nDx;m@G*)FK($>XTQIm&wR%1@gK@F6A^MCW5mH7xB
z5uAw&rnO02lhW3vhUeR2uRE<{+)duL2|uEQC^h3<4wC7axBe{g$RxN%qXZ&6AFixj
zc{K+OE-B(v=HX!Zcna51iJysi!tLe0|EB#5ExLUsxbwnpQ&cs&6Z6aE!3)fHiLJRV
z2|7{3Y6&H(-Jgvsp!Vk+9MzWD35KI`sqmfmC`5jA@vbi$ibBpAXcnT&tdK<{Z(&nT
z5mezNr=2iK-)<4^F|7V;xTvzLpCVDf*!BH{c8U5C^&m#io_ZGX$R4$nzXRDa7YV|s
zNvSFed3RiaoaOz~4%MIX`H`3gly*^iHN0*?;u=X0%QaFrwF%#qkUM&vZIb$5^gV6!
zUim037t@43u|32T&zSARfH0OLhN;(m@4%z`=J$98u(I*oYHW)B%v}jO4bwH|9-#z*
z>0cz^t^RyKN$;)<afb&!@Qsw^KG1i@Gz2WX*JvQJ9owRl<jK`!nvbT3QjN!WcVo4B
zHL*+WV;4T<4tICixt-n>Ym=9c)+3v84eMgA?V92}Yhw=NIw})ghuy1psWxM{vf7Ph
z#`#0dmTku*<j!869my!5GJ0?$uAUt(IO(?nm}n>&>BL@aff6%JCgPBCOX-lWIz5`s
zdCs#3e&TTSB|F-W5_K)6=uI@Bg`cNGSwuijhb{7qEgC_YllZQjoAjUk!Ohte&0m-A
zD6%8-a#|c!u`aIC1|V@Y)}r$2q$A@~1I%+ET{&}32$$uMOC9@JC+8*X-b|jrI~{%c
ztH?o-<8$#$8K`rcoGBmF0H?0mg9->-p-Kwv3~Lc#jL(v`RFZmBBHOd4+t__&`=X2&
zP8OpB-Vv$)nymq-cdpQ~%P(UuLI<iuy;s0GrQD;M{*Hh#kmz1{Jp`XEkJD_6khrKQ
zA%~q4UKMmn7Xl)BOby@%AF#X+T-1y101K~htzE<z5@zZm^U)ddW5u+R6^X0a$-RXy
z42q98Eh1DoFdbWNuKK4Al@(6X-2#%3=2{z=#sY-jwjGTc>yTU_XIi>_iw)}8*3f*K
zp7cE|?(h~^T1O|*rl|JfUN{yQ(n*$?cqL*P7zP#WcaUB{ij#12LdIon_!fii<b#UC
zn)5&P_s{2v`=6OvnxNSX9?Ln34(XG_*n>ovG*#~J1)o-0ckow~CvFabE2?_A^IyTS
zK)D8?2Midt-d;$W>8M%;Ghst0A0f=&;3}qlmkblgk(-mZGbXnDvIc9i7ZzO!?bZmZ
z#FC%c(=E(yy#qil(hVZ?VrTb2|FML<n0eqjpCgG||DJQ>;EMB??~^|P5h9Q_{t8dO
za$|j?pd}L6FX)n}Y|BBiTU5ANPi;0T=!sQUK-h6;3*9J*Y1h6s<aTy=)HZn^w@O8a
z1lQ3cgLSJL)|GT~q^Sbo!*dIua`IF8)vt*$PGN#g@)pS81kES^#ag~GcX7D>$J_5u
zCAN#QV5~X%LC#P8aL~CG*M&6o(pI7VxeT)dD(iJuZ){$jfG+Ibso2U}KL4}jw)Jq2
z*G_{R4crEITCS`6la~*b_a>wn@Bd1VS6WoiL0HTQ{g-$$4!j0Oqn>D=xClS5fj(Ut
zcs@2T>4+=n2nodCp8vdzmI*_CTNYL3gD+E%quJnbGKzadd~v_{_2h&h;@O#$vq#|P
zi55x1LFY@3Ci@hDP-H-EH(lCIB7&LHiWXB903&G7R-pI?8j72Rs+Bw2l${2roPbi3
zqqR>jE}u<xfk^%o-KHR)&z(LLrcYQoFGWWx&mA)qz=ug9J!p{OQIzwMjJ7)&40y5+
z|6J5jn(^e(h1W-Am|$b9xCaIJ0f=Z}qsKQh#qA|_o|DeF772^f&h!w49Lt~yEb&@7
z;0p8Hf3A>|z;UTSn%&Pd-^sJnBvAQlK#_fBvk2(M(zB>?QflxsuTg$zF_s)Cut&@p
zLv53de{@&4j{@xD<vcr@Y{bZJ{fX4WqVxp9Oo52fWa4)+QYlHNZY5W;K~$L%=ieh-
zE?~UICj8BgQJ2lWjz*m%pYPbpX}wBw&d%2(l9>Y32p0KTz|bLq9#GTA85)vmaHw|P
zF*(rws~0{nPrYo;^O?(&BW8cxLL%JGuknud>Yx^AqTi@u7+o>>qSM1$r+@P<N`!%1
z`LI^vDH^jlFi`AwN(@~NfD7{aXgh^REs{R*j#jzl78Z$((2CDfE{t%6n<tA^eiaMZ
zON6t9Z*XCy{A2@*48-!8EIFW$dv2bT-2zYd+d`J#1&awpx=3PObMQ?DxQAOHj}<>A
z5KD3`h1g4QDMH;e&<z2!pLmYLxsdrYaoPNG0W<A3CfAPzmBov{;)~^Bkv$~j2no4b
zRQwtZDkq9^xTyN}D=;64W+p_P39%ADAEFcD3DjM3@xt=7b9-nhZl|m8Woul>cR;j@
zg0%TqhUqPsnMD2~NG=I9&fs;gOkI(wfFPMdNn~VX5iml`s0*ax<$zE=B8fv2;T?6s
zqO`~&>P(o}4i`SfEW`Y|ISNNGDOs+>Ynlx=>`H_z!$e=Yqj43GeOQn+SwsyBbkVM2
zlM_PmAUlC*Cn7hsJGPsK>}CoL=pY{oL|zjwzUxg~m;!%$B5Wa$wA;{#lJe7RyY*QY
zt)V6~P$XiE6-ALnjEQ1j*cb2?;R+P6HvSU&9#oDE2a~~;G*BR4xO5KGLo554U0k$P
zRt_LkDbR=&pw$nx98-~avLYD0SEHihv%4g94t9?Zi^PJ|xv2d#(FfY$O>#ma0#RGn
zOR`u%jRxGIh#cU;9v8vx&*eX4Ua|_l=wAf70EqapMWz@K%WBd0Bt4n?)kl|vcf9nJ
z6)h!)s~qp~ky&W46&8GhC{`vwIgp_qOtEQVeAgZ55EH707l#r7Yqsz~K2TP~JaJv@
z{{2fzR3uFRzknAqM2qnSh+#j}7Ny!fwxZ<>JX231w7DX5m&8C3l0_3=G8I2YMr2_@
z2hjJk@Zz&rU{(PAE&zuMz?x){504>|XyM#B#BkC52iL{Q$@Non$xHzptsvGWK=3ae
z9PZfjRUjG0e<0g;n0r9urMtwW!0KGCNIVxt{UGX17TTH+6UG9s1mIVE<UuR|o<nfv
z5U+yjSI*Qc{1##2Z@E(9+U8I!67glno{ijU%`o`ZwuVyCj?nfQX`jB(?%diTKS(wg
z<_!R+=R}_{5h`fNG|=RLhRCu(51AsExEu0u_5J*YV-qNEK#V1@(!|+5iET8lXtZk-
z+j@qok$hz1*I3uF2g|OFM++AVprve)()(f#SZEv@zDhwp=quR!pkWGs>-01TD~B9{
z*e;mbe$RbuV5+9y53MIjlJzCD6c3mCp|IRq04;p<_c7gOSXs!$sMAk8pCgBvPtcat
zI6PD<u2Dmg<GRW*ZbRscdfg1WCPNp|j%=)hfQ$Je#biV=0F=TIJ)|qi&zowBo?J$Y
z8S=rODJ>81LVOxzo#|MpNbJRm%r9Cs?SwqkG!cE#_xNS5*6$z*{>c}v2jEZmB3XRo
z^Srprv@=sgQ5sRy^EYtoQ#w!oLXVXYPJn1l7isf*mQxc{eiCJU<Y8e%#TDm*EP`a?
zjf1Xzdo2AS02y&aQF!A?iXlz(wxXCqe&S~UQ1%oa<AYTJF+Te6P=r0d%J+=Z!)Ht>
z%7V|s-^C0|&c>PAazDt^epVe{L}do`fRAb|YO%9^8hy4IAW`^eq*i>b?jI}t8rT1@
zwnz3~d-s4lAJVA#z_FJGdHS3sIU{nF@;sj1!FeMR(b7>&Dsi8&{CcXZ2q*I0%q8G~
zsNs8=vp!uK65@O-Tbam?^*PiI0RTs0+v54K{@CWMf!ZuC4B&%s09ft!lU9v~Tu2Wo
z-YLMUE6zuow4JGWqBbiDrRii>@WAmRsiuFmD_|OVkBlhv1mj2$M`l-z)x*n5J*3db
zv%h5|FL5;`T7Lt=mH58z2T(oJmh})JtboTx_V@omv^)}0SA2NJ;5n#Tw308%L3S-O
zMe((=IrF{7CI{Neol=z?v@^teiT&McobMXX)yz0dYdc8kt2e2=-CcgMCi2yIx(Qu`
zfg8a6=3Gz|XU5m2oqcf3y1ADIf9W_hZz^1gcDZWc`krfXN=bfx=KN@QBFKhcqICEf
z)(#LIx)|3!e0Jy6B??Na?$yuG;s3BA`BHM%hliNj@^!uvy?F26Z1GX7NTK4$Hw`;x
z`Lp<e?(ZT8q->mw#YUaYFePE5UfS~4Ms@*)uEb+wqBeG}FZd;YtTwHOTliyMVh3+{
ziriF+EA!R5u}k8<P*)}Kxpu*TmUXk*Uu#L5VVivuQGdll1dVa?3OLtsS3gfl6T3(o
zPRfh%!>{%{qo9hoW9L4PRn9ezCmtK{#pD!^{whL>1`HoKH|BEe#jr+Sgw50?8{zAo
zU11Z$H)NDqf+?AE52`+ocOk7y3Z~D!5Fa;H%$C(_lC(`d<|Je|{aDGNXm<2j!E}h=
zmE+S8?&pcGJJ>h)gDw*xGl8Pk4rVj`hAx-*H(Jjf{x1~u-={H~gO6R6iPO%*vvqG?
zD8Ic^BSoONKQrV*lir=KoB2FD`@H1}rbbGx>D_xJkqY$G%!_wdYn?kK-kopX2ex$@
zWxhkSzPrdAsx9y{u}5sozCCL*ud*Y)O!5}|eP_}zs(OAwrBLMW=XbHyQW>PTIx35-
zI#K<>1w(166tp<pXwmw-({CbbG&<TsMT&|SwtBnhreeaAbhDz1JS|uvp}Kx^9mPi$
zEZZU|sY^cR7k=Y~;{x6zo1~Jl&x2dvAF*|*B>RzDZ7qjgG9#A`od1Am6+dxPBfefL
zO(2A)x$c}WT8=WDw?zpbZvEh3D*cHIC6G|hxNoK2E-R@F6y0(=D<*tppZXz3X(bBb
zM#Pe8!d&8^!S=O}N-{2QF5~nZrK`E1*{YQ*GqY#KR%t4WHa1S})&m^|!=5i*S5mkc
z35NUB5EB0I-RwPC(w}6+R*P@0RWe^I+fF@H`PkRG_T>CK9B#Nzd0_Cx-1>sF7mYxb
za+o;(`Kr>u6Qj?M&%f(mUn@5JytR)Ak>)Inc9LgTe;0w<7d|<uAx_MFCa{J6Jeb}4
zcPYZ`qvXxky$N$x3Gb>r?dCsqC**fsPIVGVSRPuCPDa~5e6)H_VM6NI+kP+Nna``s
zDz@Smce+O6zP<kQGCkpA?}GI2!7sb<_FL#-PQqGZsZ;;@3d4W!$zV@<$T#iV?Rka0
z4;=L7zUgP!yUAaKu;#vKIuQ}?URR(N#f|u157~?T_ucN@>VMo%k`kIrd`0_usg6XM
zl)2CT)wB7wQ@w8&t?fRimTxwvzS<}dDFGwVRYo&ixn~n)^4S|PhrfR|TqW)NSii*&
zRBEmBcj|ER)WvFEn^%i?$a#_|bBji}Q6(x=|Gld9N2d3Bhv&C%hZ-gKZD<Y?PKJAJ
zmuUq_c<j6A8v62G#+PO5!;i&ZzIAE(R?&#6C*tH^5Ly3XYmW-TuN@!w6`1iSKy^Fq
zji7vINBj~VpFaotgjX@uSURBoH;qX=bL*Gl`f}#W^#J`BljXl5Qlbq^g=;3ivOIL}
z+KE1>ApSl7XYRj`Nh;fc)*JuPUYJzuZ2K{QdG9%5nvj@^QyFRAAxrGLO$I_DsGQ*C
z<~-n<u-E!vCH5~w-gn8ZM04LQr)$17?rxP@A3bD^gB#s{6SLaNq$V8`!=NU8^8V4S
zS<VG2&exN4;3&D1?K-c&E_&P#s5=xe_3iyY<g+_oih5te%1)&vXF1>S|9qg?Idkw^
zq-(UNn|Z_At{WEbZLdCyOuo4aF?4cCfWES{B1DID7s!jgT8Pwfdw$07@ZfXtk^YyL
zY}0m>MGQ`a*?Y+tCzl`Cbg0N*=ZWP8|5$sTx@Yu-uD_Y?@Gn~3$*3P@tK(e-zePm`
z_Fd`3#MouGraXE_{Yp&hM&wIttXESNDdE{Z-{-|I-cGSLLk><3&%PADcUs@Is6-=n
z**0#%`)&2aQ_%eu24ADdumYNs-jc1C{;+L%OR~oDAn`iR%J;|bA=HlB33b9K)Bx{P
zopxOlIhmM<cV00&8B-ETlw4{R{TwvZ*+JWN!W#5Ss=;+4NpeZFf=z00oBm<HtJ+Eu
zk|kjuoz$N5-w{wB%Ie533PJUWla7uHf#RqGE5P|RCnitFSlLhHq?Z#yhbdRGYn^uD
zT`M`AQcug>gf$8=C+}Bz+Q&p>JV`x*?8wQDH!!<>s$CS_Y5jD=_o8&ClG$i~GdJ;h
zaI~ix(xN`zOjbM9m(<|?1ld<e$Pn@O3;voGro4{%B~1uKR{1{9mVP`w7;qNZXD5rl
zxjXoQmhRHTUl*Arm$!rAop9CF(xgeS`x3A#>Sc{c3EuM6mx-8bNohiP8RN1q!e8$(
z*S2@^X)vM~zR^~B)bxEY@Ll5r^Fp`&xYx7g9?}MP@wxFa17{zm;ka)bI~W}&KDRuY
zTS!Vg<t7uHI@##|r9%g)x-;XmSnxAxain~WGHKJgCMN$-Svygqf7JibzPsM<cLrkG
z&p1~+Inv^#WF+(z|6$K#Mtno2v_iT^g`4c%T?+bF`xpH<r8my6eM~)%(wmT0%ij}s
zxo@htl#upUAs%uY_Q5@JC?V+c^R<n(%k;;kXAO;K$>JL7b%P;a9;}UZpl+t1LUkE1
zcGMbPZ%FspHJg#p6PLD7mp<}b%dJ&IEE9%eE3JN(<GPCr&n9Kz?<--fBwZxFx;urv
zI90p`m5NY_x^1HkA!j3GG}M-6Q|{Bm4<;?hcoY`5o2>rbbM<=4A<ZTDceOLgcfDDY
z9U1DEey!bncZMU#RK4{l?X9Gpx=r6q>+j2CG)0y^KUDSy@$Jf~PIaANH`U=C&fS-n
zaE`>}Ah|zK!pkMky7;X(v)koAxg!9c2A0kpTf6iWT3<-ll^_MXxUhv+d-t;RgRhxK
zv`gJ`B6@MJK(#TlE?km&wyEUst{_LnEAVW6s1hQ3K@|&iPJcA@7Mw$ntRNd{p8ynq
z6kZ3u>5Ce-O!!)cPM2;LPUrF?^)U8In|NOWKJ{6;S39P2wzwhxKb;|ijUs15FK?54
ztgF&VNhy;LUkd$|P-$B%#|7Oi$3v++r99~_?dE#x{SNA)vs*o<%uW<d2v_c9C%Y9P
zv!$1Ua2l>ZU9C83hcLy}xy=?HzFObH<Ks0Zm44L*o@*@HtybgKx+5p8TB~unJq~xk
zO``6Uv^pvTvy`{8QcTXu5WbL~u8d^#M;b{4qN@>R8j?~mUL{%MOYg`Sx?^a!G39vZ
zrN;~0<`dl`_RSSXcK_$27B#YR{9LH!f$KPg#n#+4c4@D%{>SGQCI3=$AZj$rR5UOn
zO!QWMwT*Jqi_8PN44S39wI0blwSLwnwvZp`5RfuRu58-<iJk7YTb^$>@wqx@c*TW&
zZ|K5CqE5b!6KZOuXFj?Ig?R;6>sq;1sF#pYccQ~2z<uN!&~bqX9Pm=a_1#$&i#jBk
zA@$?&&2>y{s+pmlMj12jX0(j0()*8eodt+kLC+n9M#&42mOIRZ{g<UPxM|p#Z57Vy
zqwv!OvMGa=%6jvwK2;;$6_Fle%t=SpZ3MA_Koi2ufl5c$VkeR$B(!5zP5`6g1+<fz
z6_W5eiKp>Ebp@z@wJJP;OZRn*>DhJXJE?e9-^r--Kw=~)!9h*cg%B1TL&Az&xm;(4
z|8_62^kj)=-3QxH^O@1>BPath7#_aCS+dQLD(BR~j1=DhO|Mn<w6$q?@IurR!nD1<
zDFDZo)2$d50pF~?ByO673=B@Fzz-R_gn}TS?y%U^$XSCKbST|}AXL0Z>le8EEr2W&
z_2C*M8SfPmI$qHhGJ7*jHQXW;)#RO}CQciQySM{PIx46hsXr5!AAHVfE~cKfo>SG)
zq5zxZfeK;x&@h1UqsXN&@9Tzn=pw+9d)B0kKNh!lfx%Hnt#7TJ706F}9;3cEiV`5P
z)7ASA>1r#W@M$%m@Tu^pFVtEMEIG(xc0#rNH{I*s2OmH+^O^iCl{N%1KUj*yX&>J1
zbu0%j1A85tLj{7$PsoE3Z)DXQbbR)-x2Ox11e3}cL}|paXon{UhCyzbRUNxR{{kJr
z0IMhJvs#pf)TGMlIK1HK-lO22=AO|4h?Kv_s<h~JsTn@}LEyoa{U_BX42@nleV|Xd
ztei;_pL5b3R0PEYDNLW5$i8e`aCBg&L{VcRucPsznWNvOk1hVJ?ECj-V`IGmM57lf
z_z5IGXa$glcr{6)m=}3Az|7@ah878bX2^b1eZhx}MaI;OwRs`t164I|*9*Ysl>R*<
z%bFj!0|FbF`*y!5bhrxzh*7i@N&Mc`(Q|M;Tn^KJvU~03X(gfkp^M}MS{sgO+J8pw
z<J&miW7|sR@mN)&!Y%UCOi2x)WLnv~x&-KC>ep;|sk-8_;S(4#^r+>Nlu_!fXYwS0
z@rWe|Ue!8)xlykk!&G>ucFXc*jeVLWQCi)1(wWdcj0g-=ju+qJc05uO)2sf=4Hz^@
zN?H5VFFCs++y0sS5Uh6n^p2Ox`G?u`n)+DhqcrFm?~KeoW}yo+_1&L@>&BHnIUfGc
zzJUl9X<rON^deN&eS$i6OXD6N71?8YHc-NhYLs-A=_v2Rc7oa3i%Ge)rK^T#!;SPm
zcVDC(jW|x{>@oR;B!PskG@B*8UOzPch4cMLP>0FLmb38kmAn4EATM@{wIke=Yeyu2
zJysxc<f<-9u*#yvH$U*@ubH~hbPxWXzK$nTiN;SvO~4TIq)*mEqXq3;P{l91QX1^z
zC=jiIPh!FMli)-_rp6>RlEyLuEY6Z!97MA}L97byab=@H6szZnCtrs8*=$wS%}be+
z{cMtG@cjgs*62=-$~3rUZ(GSE{J0Jf&4%kS8&D5gE3IH&L9oMAu!O)?yaepXfPreW
zU812;q^wQLr#fzF$zO#I)3Rh4uxzXLIEtM#3;t8&nN`U1{!jRd=LQOVIJN9Ke-0%*
z<AC@o`f+iOVY<CE2j)f1gbRc`s9-+~0JPIiQwh@eG=L3F;%A>>8J;7-&hW1&v}EYA
zGVFj1jcTxinNx7-ORW}DML%Q6+4g=*nrNBBDR#SLM(cGtbaf@yxZDtu-gZXN86T7t
zJ=yApg-CE|$0X5YB8*`DFoN6_m|=g8n7#VQAf&w1)*2jL25vk{h{1N^O1r=(>-%@E
zzjTRrl6Yj0#7G115Ix+*oUdXoIxp6~<(07tWuUhGjoD|oyf_Xlp))g?nS~7k3*+g^
z9Qu6+SOh6un~@bbml21DP>I=Pwb?k{V;t4>^o-=0HQ>yQ^X6y|V$Std$itlemM4BM
zR`s7!$U>%DPIPeAfBjcii*i<VXdkWc`L!?tAuD2~J3x@>L`~D?rSHRM%@?I9lOemv
z=>b8#5j2Q29+F?1o!kUJ$<D^P!6iOA9-i#gnCuORrrU8{iIW~;W=_Us{f}>O$Q`w4
zY2GV8;~;BVMzupCQq31(=6gM3wTM?A)V8n1?Ie*NTa*<~6(UhGb^=(L538ZO_+SZQ
zmbrB9aUv`^2<*YkIuMlUT-LIi1%sHupQrYa_ohLtP>$3z+ciKE$V37{q_Q+|MwU2w
z01jj%jdA0Mpagt2>rF%W#?#7tI~7s$-WFPhb;l@|9$Q&>uiE2Q6>!}Qp1^_?48Q__
z%zx!1;~PS;RIoW73dN)={(;F6VRBnABpwDQLt?Scu>zsy)XWGzFP7+e^4}&w>FHnX
zS)itAYym_f$XEcDW`gy2fESP<^J36+tVb#UE<Nd$ujCcE@ib|XZSaYx@W^1=A=?EF
zHnkQDRjXmG4dje<o?&{QWRnW4VL?GKTkejK*_?MQuy-ak%?O{NxdJw)f@i8TcGfz)
zgM>nZvU*3ojPdE~X4ye4J_EjD<{YRbdoXSeCjY|EVT>0?9sXfDyt`<ayfzplZ8^2=
z%Byb3dtegj)Cb{b99hbkr=&Yh!(*2`53;)x7h$GzgS9hmLDWoV1}s!S3m|2@sD{CX
z{5-h(5H&ptk$Xv0_&KFvj?!4DVu$w3<8Er&o_#()FIgoJe8>i!M6od|F_-+L(f&_+
zT$Ff%HTGuT<Isri%6{4l^-OoeDi50xDmR-vw<m@ylt3Dd#qNtiX9bcnb#9KB;l~4_
zv%M$#Pj3pHzWjQZP-Y-iC}s!nU+;9gQCp`V<&hPU9~$c875!4`@^CDEzx=q1=4Y>`
zwQ%!H*ZepqaEQNEN6^7jqh<MN5L))qBDCKrFZx=g$0_feP<v2m)@L(_G5&QNIxB*g
z6(5wb+$rSB6$+&Urf80OV@Ctr(q;dBIi4E~<iSp{M{{llQJvsjfA(y~ikkCix<SK8
z2H+41`B~-d=(*oK>Hzz(L8x=*hjt%yi%*iDlR^LPB#J+kl#QUel$;h-U)Vob+DB%4
zosJGJi}EFKvcidhqoFW&s+TQh+~@t2xLdk7H?#BHU=)xcTodrLb~5zjfD_WBnFecg
zoJ8P<iBbPddhOh~?47?hn3pt~E7iKWz1v#R{MAjn?)Wzs#b~=p*%2gk)_^dIovzS0
z*7Bk!in8})=G68^dW75C-=SIU=LVyB-YW%JA2Z)BLo=iJuOpZN3EY67NKd_x&TWm!
z>J^$D#==1<(6QQk-FY^zeE<06u6b*x`Hso$5KqV=mp;(&%?ZAbK%;Q75Cm9>GSZ5r
z@YjAS;j!zXYSPKwfdpzg_i|Q5+0^gU%=Tk%KRrJ5sq5|9_@U2Ebn}9`?ePY*qAesO
zPqz%55fJp_@+2ek@LfYUFGZINp-q$L4*q>L$<*gr=cS3d+3GR;UxLA~*rCBtdvV_D
z2r2|#zmpZtce9)G3u8@PcRsLo?5*fTcy&$afx0aFfHxm1IUh<)MX*C(ZF02%3uY)J
z0pry@wi|VMae8{PscSx|iu0v*@$oC`-Z5xWQJWsJAUrHXef`#}q@h(TD0&MTN(wwh
zgB)c<5@_LVo9V*0g0DXgA6;4!ewEekKRxW^SrPhV5^S!d9A@gWSV;<N9UnaZ$4jNa
z(5t`6K+4=R#6kh(EvbSxt>5+IzF`uA1|a}(%Hj22q09Z(5p5yPZ{5YY8N!?C@I&c{
ztOf3SzZkc-b=6Y|A3lgr@P_|{YgX5FA-%13TvZ%%2amaDzwr5e&PrLa<AC`x-Y86Y
z=cKV1V3L<=HU7BObzduz;0zM}cdvATU+YfLr0*xBxg3H8(3WD)ha+0EEPxrCao5l9
zKL{H=u^IOgH9V-a+csY@%rnH(asv1lYF$Fs;ZELZ+xZI_?Ge^4N^t{W(1tE23q`RY
z^vt`}ev2d3X)~91dn5Kdo`O4F;Zd=4e`c1;U|<+)B{n)d=ltCEM)bLj6`L9`@iG5I
zvm4<D(ebjSKPt%8EcfyU=qb1MUG-7cqcoQ>6K7{Ov%l%@spkr^5qX-9K^v30Em_jD
z5?I1YL5W8Wj((c@4}6AjW;mfJ`Y5mOL2Fjt+gNU9`h)$Wb4~pzM$4RurX2+>TU1kR
zB_~5hsE>>rD%N5<M;e8XPHOp&<vo66Wfiq(<?&MML(z+@2sEo4NUPef=obBf%7NZ3
zB$0|T&WVMdJQluqYHq*<#JdCL)}+-+FCW+pq&+_N^v>b%HTH{%AR}@Vaqi7<>c=OK
zJ{|rL_jr>XJQ3%azF%^EIJldmBRKq2YVD$AeJXxs-F;>6KB2B3LgGR00ZhKT`5~{%
zR$04WfBX>(KN?h42R8;nx<lJ1Q6?^-4`2Oe_s1e+CJtGD?m;IV6E_Pfo`{jWW2*d5
zzt7)SEP+3i98W>gT%$4*tMICPhj-UpetKpa2?2+>LY~+|_l#gCPwl{VKc=iJ4G(7|
z!c|}GtD}V6?46JN!ZC`meiQb%YuC3>1hFg)$qeZ190y<eGLg`J?(KZ;^M>5K0~Jd_
zKYkFO8+j|jr?|F9x>g84w(vazx;Y~Q;S3?o?R)<!Ui91)yDmF6dSkOLYxDgW<L~RI
zwXMht?TYmumk(IbZI%O!7-u8H&Tl+zmg0$7gvkXyL|cCnPdf4I$Hu-zpWu4iu)!~H
z-+mAN4%)k+v~bG<$w@QEB&HtBN@4PG@Q;j|B-5h@#-a{46m)HSJ&CrN7ys|QzNop%
z=Z(F48E0DtYsFk*T)X#GeK|0(s8##&NA4_se^f|v%FEWTz13--cKq|Dfi#ul$_s_U
zAw^(i;$Sif8X5#$ySzGZ#MivQIk<GM$K8$St6_?ALqjTylON3TAa3UlJxu5Hz_|zN
z1NNhozI5YaDni<mY{SA!?Jn&IoRos%^HVsVpSLj}sx%PneqnY|njg{Yup1;45DM5@
z3U}KWvH4zUJk$_1U{T+?uj;!($Cm!yU%_v!(U*=|iErux7Q1c_pI-mCXHuX;+BA{o
zoojyYyZ^haYs|c9capwa$Z@DCDf_!f-nAjmcTaz1b3hlo2LtBPKi!;)D~dnK7O)~L
zew+Tu?U@WpPWffJNIz%wB&4&^_%od}pKUeF`IAsK5vA?az0)avJWjQhu#ErZcp^8?
zJxnE2hn8J-TxOfhJjX@o;xlg=k9H5j?(N@LuXaD%9C5ulZr2X+hRc&T%_fIigPQx3
zrLP|C>p4>h_jtM%WhvF%^Cgupeq1ov5?OuncbA#sZ^~U~_+Ea7C_c?Q-(Q!HwnwB>
z(d!eSEHg<u@o2iYTl$T2LSg)#$iV$hYg`MtMI{&_Mqy2eQR#gcpu;|^A<@L!X6Yk3
z_%R9zYo9GHq~4^>SF_LBaq&7WxGQ}Z;ZGWS@KdlrERdD(SWKj7b<)L7?izFRbCk}K
zI19r*EADSE+~k{xF?$g$5#ogRzmIO}P1GKElK6RNb@RdN)bO5Zy*48!+~LB?7rv*~
z${xjz4-7v(`cvB{11^5VU|K>wGZR&#ImZ0@{&2Rk35*|XsxwrGyZh(b{gNn~!dx56
z=IG($4%Iexww^&{Ot0H_W3s$ruh07?fee)KjagDUUgVVT>z}PYP0smxe${FJAZ0`<
zX;juvuDdRGa<f_$S?~n^cG%?L&&_^})na~*{r=m*)Wj&Sau(^HT%(Tb_w$+EscsbY
z$XB_4zvbIa-*KKk6*=U)S3WF9qL$U+4paW~1Dk<{$;|+kwP*+QXDZOA->#(b>f{IN
zaEa~DsWH-_t$@4XUQ;sTfv(tdE{EMP1ui~bJH{0j0WiIW@T&)ZgWRja=VkoW9b`?i
zifwQ2o~n$UcCYr^>)9p+_{TYMdo`~*ZE2Q;d^WA1sADOJ-M6b7c=}WElvj%5WhOVz
zBIKJCBHV4VB8!Qeoxw#JvqICiRMZ};linA&jHqhgyDMpd6X}cePJO?r?FhLZC{_7I
z2&3YZop>PJX4@bNW*MkO^@NU8OKR1UOZLoLAfxSJyB`o5J+rZWG6!wknI~Vfd=xU5
zybGeHr*qBc<%4oiLP3}mIU(~B_ZrX3k}|a%i^&|b*zTn`yMs$>o(8*~`W4>03=5&(
ztNiYHWi?XZuGp~p=1tk7k|+^S1jeCYN1bD^c*Sh+)o$h6zYX^U9W@i`E-Ljk_n$5<
zGgmy8ms#ka+f1|eaISu*J{{@oB<$RlD`mH5uD?PdN%{1JR>X~aBfW7>X|E}XPKpQD
ztjq$7w)WmZS<QItQ(&@B58OC0{@A}LE1~6fhjuq1)+=QiaX1#7pm!j`t#C<Po5sX7
zn$13wW8LN%{Rn=>Z<m%&j(TWq`gC{JKIXj@ril2Ep!Nh(XN=t-K3otIwJ|J}3$$rv
znXyGe5QiZ>?H{o6s{1NY8@pdKYxJKTGS+*3YUZ7=4B$~-USO{MCUGRW*YMlv!=8mg
znPmg+JMc$MVvCPQ^X^=?Ja}Kg{l0^=7D*ei$0ZVMlU^2kN9SU06xsJ4xZg4|v)lLi
zlhPuqsm0}+3kO{jXt#@>*I$s6G8Wru92yk%XgEB2Xs?oaQBn0LFH=2_uT<AddvHe%
z(mpC2D$6JaU+X{)E>0<ofpRqfZ1n5AfFDhA<<*;9^y45Q9U>?%BD7=Aa0RL%yj?yr
zrdz{c^hS80Yu)XE0d1vU*DKaeSp9jGfLoQALYw%hzv^_;$!;G7u6F5u#gf$iyEfHC
z&{S=8bG1CORry^SiU=ijppVho;Zd3nySmcO+K|(Y`Lvv<77fM0`Ow{I0r#~|FX!OF
zv+Mh>Jj-7*JYc@d`<Zowcmiw3^@6j%_gWCIMA|w2)YiuwuYssrzn6|tFErj(3pBkc
za()<Di!Zl41j-E<h(KDpEv93O^LGz=h*-|im1^fi#hn((s?WL=K7cy_O2>J#)jVl9
z!b5nZz`JWfS&KgA<|;d!{3Il2xjg9R^<yWEd#kQ+Y&EKtTg9z`>Hc4O46t-9T}H&W
z$K+5$t~PI8#FQ3wyw85`1+i?nB-zoh<PqZuLEB41Z#?>&R<-<xec3^8+_a?Hx#RJ<
zW%==u5<~l+yBw)HW~h4^cwEJ8eeucNHorH8TJqTH7|eL3tWbWbG3(lW$gPLi2#HQ6
zB!ZKEVoQ3|;O9qU<c#kQtS5L>|IDV+o@*T{jcQ^}pm7{8+KC=uEtXH!F}<-bvUqf0
zW$lin)gPOqPLA7oGCoVVBPz$e*TAze+fJ%nVz-LSQkLgyiWpS|f@ZRW6wgqE{1`%#
zc3mEO%CKX+r!<UK5nX0KJ#SAvJ2R^0dg#rj-ZiYZ-IoKtGy8u^B^Z>5V1(j=M!SVS
z&=?}8|E#=0?0KReF6p6_d8dH~aXYczb<eP3?`{&Q0NE~uo+?_F!tvoZb2U|L|6-+9
zv5c-<Gz3YcL2ohjQ7_uXUkBY!()l3O;?57|E4^NU?P~UFfL-`yWf(hjr`hFM%DqE)
z$0YnE-F9r2#tyyo@MLY(i0Vi|xHVm?1QCh4cK)X!jr3kmau{aFUX*TYYr}0kzUaOZ
zE}Fnxx2+-RL#4x1N}~Lt^4gvX29xXfxsu;HgG-&{zvb-IRl;UO-)$*06!*+^h7fU~
zE4)l2!!~KDhBFp`R7MTco~#*lHlhL=^{+&hVy%`c>c|6-mJFe53$*lip6c>JTX@E(
zfl%ZcS<0CTRw$_w`JfXYHmvR)w(E}XjHGC;uUBadry?STmE9x%{`SS1ul@h^)(jsi
z+gm--;EL6)4*u*oOc(Zy+RVfmpE&2fSLN^QLaVw0hvkgJ0WgUfY+`<yGlnoHjK$N1
zQ+DQPQkdco2QTHYtXAj>P5p3`vLoi*!LQ4<Hm^56?(a6f7o02ND5NYm&ClL{%zW&7
zL}NmN7&YF^Vt^}lMW?~3y!T>>uc?&$;rQL}LVY>xh>K;F%r;sOOpDSW;vwAzy0Zm)
z2r;7gF=+68SVwgdPs`GHTxZ~lezet_YnW+gtdu*v;;#F?xG&x|Q#&R_bY$h1UC)Nw
zY@SjyWOS2?^!%W|W;#tj<3`EayYcSw_wIwTVGq7RVuGA;xp){jC}_?F-hg5>q)EcU
zp0|2pmJ9RAquc;n&beJhYmU4#wSG2+9B9w!0lVU;4vzb)ZYw9-Z(mkhhRZv47A<>T
z6`Z)C;hTJK^wQ@PUx&2Fms#$rPL;IRU-T3#wtomIj^VSESLRj<<?id&vp2rzwk!0>
z-)?ZsAc5Km*33u4MTIkx3GAbLS3hzkEYZmguh(VDshLw(!$OHIn!ML!HO55i(`8Bm
zukF2M{E&zf#>YCzzJeN%c~&fD(*ND>BaRYFSeS&_&ew^H<*53&bj?VFT*vt?5h<;!
zmO_16=R@8d8rlB#yyHjJ;vj(AGfYozirAbu5A0n1N{d>#AkUn8`RVD~^qN-}$KOtW
zeEXs4W+;=$x$JpYxh%OQkJiOVkrq1ixjdcTKJNqG*d(fk+7BPRjqu{>?x2bC8-RSI
z1JSwTz08}GS-Bjh%PD3SJ+pfjl=ItUj$?wA;l6{EwoBJKSg~&Xojq)}q^e_06uCD2
z-`{uo0ugDg@mLuq=sZHSc;<=lYs+!RbpbqC$y?np#Ahs>^`h&Ob2@t40T<M!w!y`)
z(-HYhr9$T)YD96KgG#4_5qqxu@5sZV+ivn@1#Yf;2YNX-XZ}l-`}1{3y1ETr?;w$N
zP&Acj_NNWE9V$BKps=Q<!^Vp4r~-Y5Zq)AQT?;F^2kGq<nmG-E+#2dXH9}<#6qSKQ
z$aCp2b9!4~O;VbgG+itjgem1J4bJQ0X&5tmiKR9}w+Xhg=T3GLsW|6Wd|P*(C;ZUC
zMaz#f-(*xOPdJD!g$tKE;OcJ~H*wKmqSexZUTwQYg1XUKh4vlvf6i)a<BL<ukT^rt
z-cxUS-DmY<r*B1h>}3+=yQPe_(~Mle@=fzvXut$nrL;<Hi?Nr$IH*_Kw>fpF3p^Tr
zi6rrbi;DVwQNpTX)V>(rmY?v_1==lC?5#?<1lbCCc?Y>B2b^^qdgS)r#ziZabnola
z+Jja9y;_vIb@0a6+iX?`@5G?JbAMxbUJV){H<7NlK7JwwYt)o(<m-Urr9pXZm{9vo
zVI@2fC!7mlO6kZ{afw<7g<2sUhWJUP8@&?h@c}!KLxyvM#Y&7awVi!k@W`}1S7;`k
zk)8?;dP(--jUd1p1dt$>+YXlX5n2iAQr!{SMiu{Q$~<gxpPo{|zmV;+@k8|q^}fi|
zdl6yuwq44}L4T`KR=_1+t3h0M7%{l1wluHDY|}EY3gJ4m<H&DprmLRL9!jW^xu3m5
zchGcl6iwAol)e+@b=S_U!?PKrSPfR3T+$r49a&!$a>rhQN{sq}vp#Y}YW=XU^84($
z;o@E~x`AYX`Lyjq#Jzh*tk%MDY><2gQJla<mD2DdcQ$W2{MfV?m$t{@z<)pXsU$?+
zpt@0#-wXz<*y<hleEFcc;IQ`2jGhu*ey0t0s&K`viLO?@65eS4&ralanx)qV%bgkO
zel1eC1F3#F1hFi8f5!jqRde&QO3iVr)sXYP?NUo^aXaCvXreG$mTr4Xw-hU$Z!gj0
zppLCpXWZ4OF2a@H%vMTIIsG~_T*p==&?i~lD9F*s*AbqflhYa_vD;CxI_*@wPULE(
zF#z0Buih_GaohJ!<WmjN<RgXaD!p|enU(R2Z&hONm)!eXZaf19oE&flpsRni#fiYC
z&Bw)akX@yKcr=Jm)RyLP#47UM&j#{U7oC&Rie;@`SC6D$v)pG^D^%@qU;ZPF(60MX
z)<?07rN*Y`T7HnieEgRqx777_9MqSzn>r+D%SC;QHv21l)uXJVf<^9WIe>vcy-4Fe
zx@;|Xqd@bnf-<b!L3oXe;n56&K$<gY#^wBk)<t$#)X`_o=7^3huEPz+MH~&Rx>c>E
z*RIVzB9}o_T#J2Z6fbd^hGEbl@eT;YgWR{(UCmkm<<m{0ILqAS(|1TVgDTT6RE`>{
zomXEnOwyOffC)UJ6qbg;)96OB9a*!r{)hwhG$mfUq_loZvt!8MgP%3%8w8Dqj3Iru
zwEsYBR(kDvV`)aVbhQi`W1@CkwisevtK??T)eP=J#Wl$4Ymzz|)9yxYMv9zple%-v
zjNA?<+}^(pj%?mJqHjPqkftN!(_}Y5i+k?93^mNj%{(T_6^U+BD{9lkwLe#n<hQ<8
znfT<Q*F!RL5c%3>6^?W8g}}Xzjf3l#3p-`l5KMlX5s#ju;=n$C3^&k`>jG}vS@Wu2
zENZQST~{zl1*qM1Mn}Lk&Fy_2G_eh$JVSpIG!vA%-oB~_V$fyXfT3pz>NDV$ZHL9~
zYd<x6*v{$iuV2?-+*LP-Q?~{wde*h8Km4_NA5{uS=C5OT_J|Cc8nuq?tM?>!t#RAo
z5jZygzD8eSTwLyPeN0;5G*K#=4iNwtC*87~%wIq5(|2)E*p+z~2Q4N2G2btdm3l^m
zcB`F40W5D>FZH1@uKj$U17d)<Y|a+>4S6QQ!ZaO6@aSSn4sz8-HMyU=cRh$aVg$IY
z8Z{sJ0;5O($3YJPu%9YS>5ItAd-N*+$nzdjsb0ol#mLKe3|2R~qoly88MQTZ@C6Gi
zwyU|RN*XlC4;9iB(lP9gj&}U2@7g|vd)-G2A`?F~_{M&@6)mw<iHxR$H1Lp>Rr&At
z>DR%~HLghQ1A`?kp>z|Bahzdvje2#&Bd^4k)o_*g1Vlba64`;h@NKQ!0UO#T!)QYq
zB(4rV>{<`kvbNV>{CYm&u9`u$@eiU@K3(GMHG0~va)p(pH2`d8FMY{ge+jg+QCKIV
zu_Sa@U`TSrEwyc_q>1H&c9ohKAAV$q)`Eu8A)MoiP&T{oVebC5*D!(FS_2aLP&My?
z<0?&;Y?@Pf{0AKbj<%N$T#~k<FRYvH=IU#XIha~~Q^-BBQ9#E8nOaAjB($=B-(opd
z)jQfXVQxPX;{lw)f3h-xGLJi4V$pA<A<zKEGe*jdyT{lb2W>ObTlY}a$K-u+*j~nv
zOdV31926ae2{Z_oEtWy_Rt1ybkHw(J1>qZS!Mj}FY%tC@IgPZTJnzX)5}oU7W!UyA
z#FGIbbQ#1~%zw*?IUuOc<9(m*)2@8;y4a@0qaO%qQrh4;$Bnjme*Y)47`41p)^D`j
z^0+eCUErq2Vr3itKh>T0(wx84VQ3%>((%{yDTk_0x}}Yw8eGf<SIewTE1w=|MdRew
zBcvNq_+)EE7K-yo>SB^AmM9<Hrp0+2B8NY6)bQW&gT;bOY333A-*p8vuTM>!bpV6c
zg`gqZM$N~(wf!!cLqb7Nb_dqlKzxH9sv$t>qzFU7yQEW2<TW2#*o@9I-)=Qc{;rqs
s+;m$q9f5WfMp&Hr6pMvAP+wYzUieA5V4iAf;P>ulYPv-<912+d58@^GU;qFB

literal 0
HcmV?d00001

diff --git a/Documentation/logo.svg b/Documentation/logo.svg
deleted file mode 100644
index cb9e4851d8c..00000000000
--- a/Documentation/logo.svg
+++ /dev/null
@@ -1,2911 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:xlink="http://www.w3.org/1999/xlink"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="1771.6534"
-   height="1417.3228"
-   id="svg2"
-   sodipodi:version="0.32"
-   inkscape:version="0.46"
-   sodipodi:docname="tuz.svg"
-   inkscape:output_extension="org.inkscape.output.svg.inkscape"
-   version="1.0"
-   style="display:inline;enable-background:new"
-   inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
-   inkscape:export-xdpi="100.03588"
-   inkscape:export-ydpi="100.03588">
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     gridtolerance="10000"
-     guidetolerance="10"
-     objecttolerance="10"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="0.25"
-     inkscape:cx="-174.7931"
-     inkscape:cy="784.26325"
-     inkscape:document-units="px"
-     inkscape:current-layer="svg2"
-     showgrid="false"
-     inkscape:window-width="1280"
-     inkscape:window-height="823"
-     inkscape:window-x="-4"
-     inkscape:window-y="25"
-     showguides="true"
-     inkscape:guide-bbox="true"
-     units="mm" />
-  <defs
-     id="defs4">
-    <filter
-       inkscape:collect="always"
-       x="-0.084654994"
-       width="1.16931"
-       y="-0.36592469"
-       height="1.7318494"
-       id="filter11361">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="4.5740586"
-         id="feGaussianBlur11363" />
-    </filter>
-    <inkscape:perspective
-       sodipodi:type="inkscape:persp3d"
-       inkscape:vp_x="0 : 564.0976 : 1"
-       inkscape:vp_y="0 : 1000 : 0"
-       inkscape:vp_z="1445.8591 : 564.0976 : 1"
-       inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
-       id="perspective8145" />
-    <linearGradient
-       id="linearGradient7622">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop7624" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:0;"
-         offset="1"
-         id="stop7626" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4113">
-      <stop
-         style="stop-color:#000000;stop-opacity:0;"
-         offset="0"
-         id="stop4115" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="1"
-         id="stop4117" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient3660">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop3662" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:0;"
-         offset="1"
-         id="stop3664" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3627">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop3629" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="1"
-         id="stop3631" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient2843">
-      <stop
-         id="stop2845"
-         offset="0"
-         style="stop-color:#000000;stop-opacity:1;" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="0.02188784"
-         id="stop2847" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="0.75866222"
-         id="stop2849" />
-      <stop
-         id="stop2851"
-         offset="0.88508981"
-         style="stop-color:#232323;stop-opacity:1;" />
-      <stop
-         id="stop2853"
-         offset="1"
-         style="stop-color:#595959;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient8964">
-      <stop
-         style="stop-color:#1a1a1a;stop-opacity:1;"
-         offset="0"
-         id="stop8966" />
-      <stop
-         style="stop-color:#1a1a1a;stop-opacity:0;"
-         offset="1"
-         id="stop8968" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient8952">
-      <stop
-         style="stop-color:#0a0c0c;stop-opacity:1;"
-         offset="0"
-         id="stop8954" />
-      <stop
-         style="stop-color:#1f2727;stop-opacity:0;"
-         offset="1"
-         id="stop8956" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient8430">
-      <stop
-         style="stop-color:#1e2323;stop-opacity:1;"
-         offset="0"
-         id="stop8432" />
-      <stop
-         id="stop8438"
-         offset="0.55992389"
-         style="stop-color:#181d1d;stop-opacity:1;" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="1"
-         id="stop8434" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient8398">
-      <stop
-         style="stop-color:#283131;stop-opacity:0;"
-         offset="0"
-         id="stop8400" />
-      <stop
-         id="stop8402"
-         offset="0.5125587"
-         style="stop-color:#1e2424;stop-opacity:0;" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="1"
-         id="stop8404" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient4870">
-      <stop
-         style="stop-color:#c7bd80;stop-opacity:1;"
-         offset="0"
-         id="stop4872" />
-      <stop
-         style="stop-color:#c7bd80;stop-opacity:0;"
-         offset="1"
-         id="stop4874" />
-    </linearGradient>
-    <linearGradient
-       inkscape:collect="always"
-       id="linearGradient4862">
-      <stop
-         style="stop-color:#e2e2e2;stop-opacity:1;"
-         offset="0"
-         id="stop4864" />
-      <stop
-         style="stop-color:#e2e2e2;stop-opacity:0;"
-         offset="1"
-         id="stop4866" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4478">
-      <stop
-         style="stop-color:#f9eed3;stop-opacity:1;"
-         offset="0"
-         id="stop4480" />
-      <stop
-         style="stop-color:#000000;stop-opacity:0;"
-         offset="1"
-         id="stop4482" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4106">
-      <stop
-         style="stop-color:#d9e002;stop-opacity:1;"
-         offset="0"
-         id="stop4108" />
-      <stop
-         id="stop4114"
-         offset="0.5"
-         style="stop-color:#a9ae01;stop-opacity:1;" />
-      <stop
-         style="stop-color:#717501;stop-opacity:1;"
-         offset="1"
-         id="stop4110" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4084">
-      <stop
-         style="stop-color:#7d7d00;stop-opacity:1;"
-         offset="0"
-         id="stop4086" />
-      <stop
-         id="stop4088"
-         offset="0.3636601"
-         style="stop-color:#c6c700;stop-opacity:1;" />
-      <stop
-         style="stop-color:#f6f800;stop-opacity:1;"
-         offset="1"
-         id="stop4090" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4041">
-      <stop
-         id="stop4043"
-         offset="0"
-         style="stop-color:#ffff00;stop-opacity:1;" />
-      <stop
-         id="stop4045"
-         offset="1"
-         style="stop-color:#ffff00;stop-opacity:0;" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4025">
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="0"
-         id="stop4027" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:0;"
-         offset="1"
-         id="stop4031" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient4013">
-      <stop
-         style="stop-color:#ffff00;stop-opacity:1;"
-         offset="0"
-         id="stop4015" />
-      <stop
-         style="stop-color:#b2b200;stop-opacity:1;"
-         offset="1"
-         id="stop4017" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3985">
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="0"
-         id="stop3987" />
-      <stop
-         style="stop-color:#1d1d1d;stop-opacity:1;"
-         offset="1"
-         id="stop3989" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3961">
-      <stop
-         style="stop-color:#283131;stop-opacity:0;"
-         offset="0"
-         id="stop3963" />
-      <stop
-         id="stop3965"
-         offset="0.5"
-         style="stop-color:#1e2424;stop-opacity:1;" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="1"
-         id="stop3967" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3951">
-      <stop
-         id="stop3953"
-         offset="0"
-         style="stop-color:#344040;stop-opacity:1;" />
-      <stop
-         style="stop-color:#222929;stop-opacity:1;"
-         offset="0.5"
-         id="stop3955" />
-      <stop
-         id="stop3957"
-         offset="1"
-         style="stop-color:#000000;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3909">
-      <stop
-         style="stop-color:#283131;stop-opacity:1;"
-         offset="0"
-         id="stop3911" />
-      <stop
-         id="stop3917"
-         offset="0.5"
-         style="stop-color:#1e2424;stop-opacity:1;" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="1"
-         id="stop3913" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3537">
-      <stop
-         style="stop-color:#ada469;stop-opacity:1;"
-         offset="0"
-         id="stop3539" />
-      <stop
-         id="stop3545"
-         offset="0.81132078"
-         style="stop-color:#ada469;stop-opacity:1;" />
-      <stop
-         style="stop-color:#ffffff;stop-opacity:1;"
-         offset="1"
-         id="stop3541" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3317">
-      <stop
-         style="stop-color:#cfc690;stop-opacity:1"
-         offset="0"
-         id="stop3319" />
-      <stop
-         id="stop3321"
-         offset="0.21161865"
-         style="stop-color:#afa775;stop-opacity:1;" />
-      <stop
-         id="stop3323"
-         offset="0.53408515"
-         style="stop-color:#615c3a;stop-opacity:1;" />
-      <stop
-         style="stop-color:#000000;stop-opacity:1;"
-         offset="0.76504093"
-         id="stop3325" />
-      <stop
-         id="stop3327"
-         offset="1"
-         style="stop-color:#403518;stop-opacity:1;" />
-    </linearGradient>
-    <linearGradient
-       id="linearGradient3239">
-      <stop
-         id="stop3251"
-         offset="0"
-         style="stop-color:#cfc690;stop-opacity:1;" />
-      <stop
-         style="stop-color:#afa775;stop-opacity:1;"
-         offset="0.21161865"
-         id="stop3267" />
-      <stop
-         style="stop-color:#615c3a;stop-opacity:1;"
-         offset="0.53408515"
-         id="stop3261" />
-      <stop
-         id="stop3265"
-         offset="0.76504093"
-         style="stop-color:#000000;stop-opacity:1;" />
-      <stop
-         style="stop-color:#403518;stop-opacity:1;"
-         offset="1"
-         id="stop3243" />
-    </linearGradient>
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3239"
-       id="radialGradient3281"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
-       spreadMethod="pad"
-       cx="806.52582"
-       cy="212.68117"
-       fx="806.52582"
-       fy="212.68117"
-       r="48.363216" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3317"
-       id="radialGradient3315"
-       cx="543.6698"
-       cy="147.3131"
-       fx="543.6698"
-       fy="147.3131"
-       r="47.863216"
-       gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
-       gradientUnits="userSpaceOnUse" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3537"
-       id="radialGradient3543"
-       cx="385"
-       cy="237.00504"
-       fx="385"
-       fy="237.00504"
-       r="86.928574"
-       gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
-       gradientUnits="userSpaceOnUse" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3909"
-       id="radialGradient3915"
-       cx="418.30365"
-       cy="342.47794"
-       fx="418.30365"
-       fy="342.47794"
-       r="131.4509"
-       gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
-       gradientUnits="userSpaceOnUse" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3951"
-       id="radialGradient3933"
-       cx="397.16388"
-       cy="336.95245"
-       fx="397.16388"
-       fy="336.95245"
-       r="36.75"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3961"
-       id="linearGradient3959"
-       x1="398.21429"
-       y1="343.52289"
-       x2="379.28571"
-       y2="265.30862"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="translate(450.03125,73.843964)" />
-    <filter
-       inkscape:collect="always"
-       id="filter3981"
-       x="-0.30000001"
-       width="1.6"
-       y="-0.30000001"
-       height="1.6">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="2"
-         id="feGaussianBlur3983" />
-    </filter>
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3985"
-       id="radialGradient3991"
-       cx="402.48898"
-       cy="317.23578"
-       fx="402.48898"
-       fy="317.23578"
-       r="23.714285"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3999">
-      <path
-         style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
-         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
-         id="path4001"
-         sodipodi:nodetypes="czzczzzzc" />
-    </clipPath>
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4013"
-       id="radialGradient4056"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
-       cx="228.81355"
-       cy="440.26971"
-       fx="228.81355"
-       fy="440.26971"
-       r="119.17509" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4041"
-       id="radialGradient4060"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
-       cx="275.4422"
-       cy="335.34866"
-       fx="275.4422"
-       fy="335.34866"
-       r="36.75" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4025"
-       id="radialGradient4062"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
-       cx="275.4422"
-       cy="335.34866"
-       fx="275.4422"
-       fy="335.34866"
-       r="36.75" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4084"
-       id="linearGradient4082"
-       gradientUnits="userSpaceOnUse"
-       x1="182.35046"
-       y1="256.11136"
-       x2="145.53348"
-       y2="542.20502" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath4100">
-      <path
-         style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
-         id="path4102"
-         sodipodi:nodetypes="ccccccc" />
-    </clipPath>
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4106"
-       id="radialGradient4112"
-       cx="250.22678"
-       cy="475.09763"
-       fx="250.22678"
-       fy="475.09763"
-       r="95.98877"
-       gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4478"
-       id="linearGradient4484"
-       x1="412.08926"
-       y1="404.91574"
-       x2="417.375"
-       y2="401.82648"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4478"
-       id="linearGradient4486"
-       x1="411.91071"
-       y1="404.91577"
-       x2="417.375"
-       y2="401.82648"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4478"
-       id="linearGradient4488"
-       x1="411.91071"
-       y1="405.54077"
-       x2="417.375"
-       y2="401.82648"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4478"
-       id="linearGradient4490"
-       x1="412.08926"
-       y1="405.54077"
-       x2="417.375"
-       y2="401.82648"
-       gradientUnits="userSpaceOnUse" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4478"
-       id="linearGradient4492"
-       x1="411.73212"
-       y1="405.54077"
-       x2="417.375"
-       y2="401.82648"
-       gradientUnits="userSpaceOnUse" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4862"
-       id="radialGradient4868"
-       cx="429.56738"
-       cy="377.42877"
-       fx="429.56738"
-       fy="377.42877"
-       r="72.079735"
-       gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
-       gradientUnits="userSpaceOnUse" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4870"
-       id="radialGradient4876"
-       cx="437.6991"
-       cy="391.21735"
-       fx="437.6991"
-       fy="391.21735"
-       r="36.611931"
-       gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
-       gradientUnits="userSpaceOnUse" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4013"
-       id="radialGradient3585"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
-       cx="228.81355"
-       cy="440.26971"
-       fx="228.81355"
-       fy="440.26971"
-       r="119.17509" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4084"
-       id="linearGradient3587"
-       gradientUnits="userSpaceOnUse"
-       x1="182.35046"
-       y1="256.11136"
-       x2="145.53348"
-       y2="542.20502" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3317"
-       id="radialGradient8410"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
-       cx="317.78754"
-       cy="129.65378"
-       fx="317.78754"
-       fy="129.65378"
-       r="47.863216" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient8398"
-       id="radialGradient8412"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
-       cx="325.30847"
-       cy="80.909554"
-       fx="325.30847"
-       fy="80.909554"
-       r="26.937988" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8514">
-      <path
-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
-         id="path8516"
-         sodipodi:nodetypes="cscccccccccccc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8604">
-      <path
-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
-         id="path8606"
-         sodipodi:nodetypes="cscccccccccccc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8610">
-      <path
-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
-         id="path8612"
-         sodipodi:nodetypes="cscccccccccccc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8616">
-      <path
-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
-         id="path8618"
-         sodipodi:nodetypes="cscccccccccccc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8622">
-      <path
-         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
-         id="path8624"
-         sodipodi:nodetypes="czzzzzzczczczczzzc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8642">
-      <path
-         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
-         id="path8644"
-         sodipodi:nodetypes="czzcczcc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8658">
-      <path
-         style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
-         id="path8660"
-         sodipodi:nodetypes="czzzcczzcc" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter8802"
-       x="-0.35311759"
-       width="1.7062352"
-       y="-0.1817714"
-       height="1.3635428">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="48.038491"
-         id="feGaussianBlur8804" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8806"
-       x="-0.61142862"
-       width="2.2228572"
-       y="-0.14930232"
-       height="1.2986046">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="37.830213"
-         id="feGaussianBlur8808" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8810"
-       x="-0.23519406"
-       width="1.4703881"
-       y="-0.24500646"
-       height="1.4900129">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="58.328041"
-         id="feGaussianBlur8812" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8814"
-       x="-0.20466694"
-       width="1.4093339"
-       y="-0.29007819"
-       height="1.5801564">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="22.300169"
-         id="feGaussianBlur8816" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8818"
-       x="-0.34381232"
-       width="1.6876246"
-       y="-0.18433961"
-       height="1.3686792">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="34.542167"
-         id="feGaussianBlur8820" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8822"
-       x="-0.2742857"
-       width="1.5485713"
-       y="-0.21333334"
-       height="1.4266667">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="11.313708"
-         id="feGaussianBlur8824" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8826"
-       x="-0.25894088"
-       width="1.5178818"
-       y="-0.2236412"
-       height="1.4472824">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="19.631544"
-         id="feGaussianBlur8828" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8856"
-       x="-0.3253231"
-       width="1.6506462"
-       y="-0.19013336"
-       height="1.3802667">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="28.712591"
-         id="feGaussianBlur8858" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8860"
-       x="-0.38093024"
-       width="1.7618605"
-       y="-0.17518716"
-       height="1.3503743">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="19.304015"
-         id="feGaussianBlur8862" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8888"
-       x="-0.2112188"
-       width="1.4224375"
-       y="-0.16808605"
-       height="1.3361721">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="8.3693583"
-         id="feGaussianBlur8890" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8892"
-       x="-0.18692794"
-       width="1.3738559"
-       y="-0.23646873"
-       height="1.4729375">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="31.21228"
-         id="feGaussianBlur8894" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8906">
-      <path
-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
-         id="path8908"
-         sodipodi:nodetypes="cscccccccccccc" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter8940"
-       x="-0.25152978"
-       width="1.5030596"
-       y="-0.053035267"
-       height="1.1060705">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="13.024603"
-         id="feGaussianBlur8942" />
-    </filter>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient8952"
-       id="linearGradient8958"
-       x1="609.31244"
-       y1="239.46866"
-       x2="560.83142"
-       y2="262.86206"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="translate(450.03125,73.843964)" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient8964"
-       id="linearGradient8970"
-       x1="603.84064"
-       y1="627.85303"
-       x2="616.24396"
-       y2="585.42664"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="translate(450.03125,73.843964)" />
-    <filter
-       inkscape:collect="always"
-       id="filter9020"
-       x="-0.32861114"
-       width="1.6572223"
-       y="-0.182"
-       height="1.364">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="20.912684"
-         id="feGaussianBlur9022" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter9024"
-       x="-0.55453134"
-       width="2.1090627"
-       y="-0.51434779"
-       height="2.0286956">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="20.912684"
-         id="feGaussianBlur9026" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter9044"
-       x="-0.32631579"
-       width="1.6526316"
-       y="-0.84545463"
-       height="2.6909094">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="21.92031"
-         id="feGaussianBlur9046" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter9048"
-       x="-0.40879121"
-       width="1.8175824"
-       y="-0.71538466"
-       height="2.4307692">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="21.92031"
-         id="feGaussianBlur9050" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter3587"
-       x="-0.1">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="8.881432"
-         id="feGaussianBlur3589" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3602">
-      <path
-         sodipodi:nodetypes="czzzzzzczczczczzzc"
-         id="path3604"
-         d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
-         style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter4120"
-       x="-0.2770822"
-       width="1.5541644"
-       y="-0.32482043"
-       height="1.6496409">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="19.956289"
-         id="feGaussianBlur4122" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3631">
-      <path
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
-         id="path3633"
-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3665">
-      <path
-         sodipodi:nodetypes="czzcczcc"
-         id="path3667"
-         d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
-         style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3677">
-      <path
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
-         id="path3679"
-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter3898">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="10.892985"
-         id="feGaussianBlur3900" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4130"
-       x="-0.49509686"
-       width="1.9901937"
-       y="-0.26708817"
-       height="1.5341763">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="10.730622"
-         id="feGaussianBlur4132" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4141"
-       x="-0.40611032"
-       width="1.8122206"
-       y="-0.30260596"
-       height="1.6052119">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="9.8586086"
-         id="feGaussianBlur4143" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath4177">
-      <path
-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
-         id="path4179"
-         d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter4185">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="3.6164709"
-         id="feGaussianBlur4187" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4105">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="3.8640966"
-         id="feGaussianBlur4107" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath2833">
-      <path
-         style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
-         id="path2835"
-         sodipodi:nodetypes="czzzcczzcc" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient2843"
-       id="linearGradient2841"
-       gradientUnits="userSpaceOnUse"
-       x1="347.89655"
-       y1="1070.2124"
-       x2="275.58191"
-       y2="867.97992" />
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3627"
-       id="linearGradient3688"
-       gradientUnits="userSpaceOnUse"
-       x1="699.32867"
-       y1="269.76755"
-       x2="698.97504"
-       y2="346.1351" />
-    <mask
-       maskUnits="userSpaceOnUse"
-       id="mask3684">
-      <path
-         sodipodi:type="arc"
-         style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         id="path3686"
-         sodipodi:cx="579.474"
-         sodipodi:cy="260.57516"
-         sodipodi:rx="192.6866"
-         sodipodi:ry="164.04877"
-         d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
-         transform="translate(-174.03125,62.156036)" />
-    </mask>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3622">
-      <path
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
-         id="path3624"
-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3636">
-      <path
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
-         id="path3638"
-         sodipodi:nodetypes="czzzzzzcccccccccczczz" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3660"
-       id="linearGradient3666"
-       x1="1255.7386"
-       y1="667.09216"
-       x2="893.69995"
-       y2="858.01099"
-       gradientUnits="userSpaceOnUse" />
-    <filter
-       inkscape:collect="always"
-       id="filter3779"
-       x="-0.087980822"
-       width="1.1759616"
-       y="-0.17728332"
-       height="1.3545666">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="16.340344"
-         id="feGaussianBlur3781" />
-    </filter>
-    <filter
-       id="filter3785"
-       inkscape:label="White Fur">
-      <feTurbulence
-         id="feTurbulence3787"
-         in="SourceAlpha"
-         type="fractalNoise"
-         baseFrequency="0.24044943820224721"
-         numOctaves="10"
-         seed="655"
-         result="result0" />
-      <feDisplacementMap
-         id="feDisplacementMap3789"
-         in="SourceGraphic"
-         in2="result0"
-         scale="62"
-         xChannelSelector="B"
-         yChannelSelector="G" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter3677">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="2.0397518"
-         id="feGaussianBlur3679" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3722">
-      <path
-         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
-         id="path3724"
-         sodipodi:nodetypes="czzzzzzzzcc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3986">
-      <path
-         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
-         id="path3988"
-         sodipodi:nodetypes="czzzzzzzzcc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3992">
-      <path
-         style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
-         id="path3994"
-         sodipodi:nodetypes="czzzzzzzzcc" />
-    </clipPath>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath3998">
-      <path
-         style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
-         id="path4000"
-         sodipodi:nodetypes="cscccccccccccc" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter4002"
-       x="-0.24334238"
-       width="1.4866848"
-       y="-0.39104807"
-       height="1.7820961">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="14.589518"
-         id="feGaussianBlur4004" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4010"
-       x="-0.14577261"
-       width="1.2915452"
-       y="-0.23523259"
-       height="1.4704652">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="4.4442907"
-         id="feGaussianBlur4012" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4053">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.6062947"
-         id="feGaussianBlur4055" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4079">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="6.5887624"
-         id="feGaussianBlur4081" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter4083">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.5052066"
-         id="feGaussianBlur4085" />
-    </filter>
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient4113"
-       id="radialGradient4119"
-       cx="296.33783"
-       cy="427.17749"
-       fx="296.33783"
-       fy="427.17749"
-       r="19.704132"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
-    <filter
-       inkscape:collect="always"
-       id="filter6949"
-       x="-0.10294895"
-       width="1.2058979"
-       y="-0.34224695"
-       height="1.6844939">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6951" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6953"
-       x="-0.098320946"
-       width="1.1966419"
-       y="-0.19750816"
-       height="1.3950163">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6955" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6957"
-       x="-0.098213427"
-       width="1.1964267"
-       y="-0.19838208"
-       height="1.3967642">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6959" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6961"
-       x="-0.09919104"
-       width="1.1983821"
-       y="-0.22643611"
-       height="1.4528722">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6963" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6965"
-       x="-0.099081434"
-       width="1.1981629"
-       y="-0.22529824"
-       height="1.4505965">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6967" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6969"
-       x="-0.10450897"
-       width="1.2090179"
-       y="-0.40468886"
-       height="1.8093777">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6971" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6973"
-       x="-0.10330495"
-       width="1.2066098"
-       y="-0.36439717"
-       height="1.7287945">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6975" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6977"
-       x="-0.10224481"
-       width="1.2044896"
-       y="-0.32371372"
-       height="1.6474274">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6979" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6981"
-       x="-0.10052545"
-       width="1.2010509"
-       y="-0.2742162"
-       height="1.5484324">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6983" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6985"
-       x="-0.098428868"
-       width="1.1968577"
-       y="-0.20853186"
-       height="1.4170637">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6987" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6989"
-       x="-0.098428868"
-       width="1.1968577"
-       y="-0.20287035"
-       height="1.4057407">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6991" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6993"
-       x="-0.098213255"
-       width="1.1964265"
-       y="-0.19838208"
-       height="1.3967642">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6995" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter6997">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur6999" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7001">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.1675612"
-         id="feGaussianBlur7003" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7285"
-       x="-0.030884685"
-       width="1.0617694"
-       y="-0.10267408"
-       height="1.2053483">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7287" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7289">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7291" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7293">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7295" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7297">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7299" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7301">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7303" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7305">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7307" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7309">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7311" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7313">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7315" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7317">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7319" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7321">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7323" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7325"
-       x="-0.031352691"
-       width="1.0627054"
-       y="-0.12140666"
-       height="1.2428133">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7327" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7329"
-       x="-0.030991485"
-       width="1.061983"
-       y="-0.10931916"
-       height="1.2186383">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7331" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7333">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7335" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7337">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.35026836"
-         id="feGaussianBlur7339" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7345">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.7233839"
-         id="feGaussianBlur7347" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath7421">
-      <path
-         sodipodi:type="inkscape:offset"
-         inkscape:radius="0"
-         inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
-         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         id="path7423"
-         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
-         transform="translate(8.0045714e-2,-3.125e-2)" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter7578"
-       x="-0.08160872"
-       width="1.1632174"
-       y="-0.22659944"
-       height="1.4531989">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="2.437399"
-         id="feGaussianBlur7580" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter7594"
-       x="-0.040804356"
-       width="1.0816087"
-       y="-0.11329972"
-       height="1.2265995">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="1.2186995"
-         id="feGaussianBlur7596" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath7606">
-      <path
-         id="path7608"
-         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
-         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter7610"
-       x="-0.021942979"
-       width="1.0438859"
-       y="-0.10017137"
-       height="1.2003427">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="0.57530213"
-         id="feGaussianBlur7612" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath7616">
-      <path
-         id="path7618"
-         d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
-         style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <linearGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient7622"
-       id="linearGradient7708"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="translate(-19.091883,4.2426407)"
-       x1="774.97668"
-       y1="-211.87105"
-       x2="755.11584"
-       y2="-202.67865" />
-    <mask
-       maskUnits="userSpaceOnUse"
-       id="mask7704">
-      <path
-         style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
-         d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
-         id="path7706" />
-    </mask>
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient8430"
-       id="radialGradient7904"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
-       cx="142.95833"
-       cy="107.09234"
-       fx="142.95833"
-       fy="107.09234"
-       r="66.981766" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient3317"
-       id="radialGradient7906"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
-       cx="317.78754"
-       cy="129.65378"
-       fx="317.78754"
-       fy="129.65378"
-       r="47.863216" />
-    <radialGradient
-       inkscape:collect="always"
-       xlink:href="#linearGradient8398"
-       id="radialGradient7908"
-       gradientUnits="userSpaceOnUse"
-       gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
-       cx="325.30847"
-       cy="80.909554"
-       fx="325.30847"
-       fy="80.909554"
-       r="26.937988" />
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8209">
-      <path
-         sodipodi:nodetypes="czcc"
-         id="path8211"
-         d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
-         style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter8225">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="10.661912"
-         id="feGaussianBlur8227" />
-    </filter>
-    <filter
-       inkscape:collect="always"
-       id="filter8333">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="7.18"
-         id="feGaussianBlur8335" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8338">
-      <path
-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
-         id="path8340"
-         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter8354">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="6.82"
-         id="feGaussianBlur8356" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8359">
-      <path
-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
-         id="path8361"
-         d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter8379"
-       x="-0.14413793"
-       width="1.288276"
-       y="-0.10278689"
-       height="1.2055738">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="7.389266"
-         id="feGaussianBlur8381" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8392">
-      <path
-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
-         id="path8394"
-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-    <filter
-       inkscape:collect="always"
-       id="filter8404"
-       x="-0.090268657"
-       width="1.1805373"
-       y="-0.10250848"
-       height="1.205017">
-      <feGaussianBlur
-         inkscape:collect="always"
-         stdDeviation="5.3457272"
-         id="feGaussianBlur8406" />
-    </filter>
-    <clipPath
-       clipPathUnits="userSpaceOnUse"
-       id="clipPath8417">
-      <path
-         sodipodi:nodetypes="czzzzzzcccccccccczczz"
-         id="path8419"
-         d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
-         style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </clipPath>
-  </defs>
-  <metadata
-     id="metadata7">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:groupmode="layer"
-     id="layer1"
-     inkscape:label="Shadow">
-    <path
-       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
-       d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
-       id="path10326"
-       sodipodi:nodetypes="cccccccccsccccccccccc"
-       transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
-       inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
-       inkscape:export-xdpi="142.10527"
-       inkscape:export-ydpi="142.10527" />
-  </g>
-  <g
-     inkscape:groupmode="layer"
-     id="layer20"
-     inkscape:label="New Ear">
-    <g
-       style="opacity:1;display:inline;enable-background:new"
-       id="g7882"
-       transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
-      <path
-         sodipodi:nodetypes="czzzzcc"
-         id="path7876"
-         d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
-         style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <path
-         sodipodi:nodetypes="czzzzzc"
-         id="path7878"
-         d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
-         style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <path
-         sodipodi:nodetypes="czccssc"
-         id="path7880"
-         d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
-         style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-    </g>
-  </g>
-  <g
-     inkscape:groupmode="layer"
-     id="layer21"
-     inkscape:label="Rendered2"
-     style="display:inline">
-    <path
-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
-       id="path7917"
-       sodipodi:nodetypes="czzzcczzcc" />
-    <path
-       style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
-       d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
-       id="path7919"
-       clip-path="url(#clipPath8658)"
-       sodipodi:nodetypes="ccccc"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
-       d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
-       id="path7923"
-       clip-path="url(#clipPath2833)"
-       sodipodi:nodetypes="cccccc"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
-       id="path7921"
-       sodipodi:nodetypes="czzcczcc" />
-    <path
-       style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
-       d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
-       id="path7925"
-       sodipodi:nodetypes="ccccccc"
-       clip-path="url(#clipPath3665)"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
-       id="path7927"
-       sodipodi:nodetypes="czzzzcc" />
-    <path
-       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
-       d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
-       id="path7929"
-       clip-path="url(#clipPath8642)"
-       sodipodi:nodetypes="ccccc"
-       transform="translate(276,136)" />
-    <g
-       style="opacity:1;display:inline;enable-background:new"
-       id="g7931"
-       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
-       inkscape:transform-center-x="-347.89063"
-       inkscape:transform-center-y="-28.255779">
-      <path
-         style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
-         id="path7933" />
-      <g
-         clip-path="url(#clipPath7616)"
-         style="display:inline;filter:url(#filter7610);enable-background:new"
-         id="g7935"
-         transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
-        <path
-           sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
-           id="path7937"
-           d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-        <path
-           id="path7939"
-           d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-           sodipodi:nodetypes="cssccsscc" />
-        <path
-           id="path7941"
-           d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-           sodipodi:nodetypes="csccscc" />
-      </g>
-      <g
-         clip-path="url(#clipPath7606)"
-         id="g7943">
-        <path
-           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
-           d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
-           id="path7945"
-           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
-        <path
-           style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
-           d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
-           id="path7947"
-           sodipodi:nodetypes="czzzzzzzzzzzzzz" />
-      </g>
-    </g>
-    <path
-       style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
-       id="path7949"
-       sodipodi:nodetypes="cscccccccccccc" />
-    <path
-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
-       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
-       id="path7951"
-       sodipodi:nodetypes="ccccczzzcc"
-       clip-path="url(#clipPath8616)"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
-       id="path7953"
-       sodipodi:nodetypes="czcc" />
-    <path
-       style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
-       d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
-       id="path7955"
-       sodipodi:nodetypes="cccc"
-       clip-path="url(#clipPath8209)"
-       transform="translate(276,136)" />
-    <g
-       transform="translate(450.03125,73.843964)"
-       style="opacity:1;display:inline;enable-background:new"
-       id="g7957"
-       clip-path="url(#clipPath3998)">
-      <g
-         transform="translate(-174.03125,62.156036)"
-         style="filter:url(#filter3677)"
-         id="g7959">
-        <g
-           id="g7961"
-           style="filter:url(#filter3785)">
-          <path
-             sodipodi:nodetypes="czzzzzzzzzz"
-             id="path7963"
-             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <rect
-             y="412.60312"
-             x="343.6539"
-             height="181.01935"
-             width="381.83765"
-             id="rect7965"
-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-        </g>
-        <g
-           id="g7967"
-           style="filter:url(#filter3785)">
-          <path
-             sodipodi:nodetypes="czzzcc"
-             id="path7969"
-             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-             transform="translate(174.03125,-62.156036)" />
-          <rect
-             y="344.82138"
-             x="702.86414"
-             height="162.63455"
-             width="207.8894"
-             id="rect7971"
-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-        </g>
-      </g>
-      <g
-         transform="translate(-174.03125,62.156036)"
-         style="opacity:0.18000004;display:inline;enable-background:new"
-         id="g7973">
-        <g
-           id="g7975"
-           style="filter:url(#filter3785)">
-          <path
-             sodipodi:nodetypes="czzzzzzzzzz"
-             id="path7977"
-             d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <rect
-             y="412.60312"
-             x="343.6539"
-             height="181.01935"
-             width="381.83765"
-             id="rect7979"
-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-        </g>
-        <g
-           id="g7981"
-           style="filter:url(#filter3785)">
-          <path
-             sodipodi:nodetypes="czzzcc"
-             id="path7983"
-             d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-             transform="translate(174.03125,-62.156036)" />
-          <rect
-             y="344.82138"
-             x="702.86414"
-             height="162.63455"
-             width="207.8894"
-             id="rect7985"
-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-        </g>
-      </g>
-    </g>
-    <path
-       style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
-       d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
-       id="path7987"
-       clip-path="url(#clipPath8604)"
-       sodipodi:nodetypes="cccccscc"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
-       id="path7989"
-       sodipodi:nodetypes="czzzzzzc" />
-    <path
-       style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
-       id="path7991"
-       sodipodi:nodetypes="czzzzc" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
-       id="path7993"
-       sodipodi:cx="385"
-       sodipodi:cy="237.00504"
-       sodipodi:rx="86.428574"
-       sodipodi:ry="73.928574"
-       d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
-       transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
-       clip-path="url(#clipPath4100)" />
-    <path
-       transform="translate(450.03125,73.843964)"
-       style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
-       id="path7995"
-       sodipodi:nodetypes="csczzc"
-       mask="url(#mask3684)" />
-    <path
-       style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
-       id="path7997"
-       sodipodi:nodetypes="czcc" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       id="path7999"
-       sodipodi:cx="409.28571"
-       sodipodi:cy="306.64789"
-       sodipodi:rx="36.25"
-       sodipodi:ry="36.25"
-       d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
-       transform="translate(449.49554,74.915393)" />
-    <path
-       style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
-       d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
-       id="path8001"
-       sodipodi:nodetypes="cccccccccc"
-       clip-path="url(#clipPath8616)"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
-       d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
-       id="path8003"
-       sodipodi:nodetypes="czzcc" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       id="path8005"
-       sodipodi:cx="410"
-       sodipodi:cy="306.64789"
-       sodipodi:rx="23.214285"
-       sodipodi:ry="23.214285"
-       d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
-       transform="translate(449.67411,74.915393)" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
-       id="path8007"
-       sodipodi:cx="414.28571"
-       sodipodi:cy="303.07648"
-       sodipodi:rx="7.5"
-       sodipodi:ry="7.5"
-       d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
-       transform="translate(451.99554,73.486821)" />
-    <path
-       style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
-       id="path8009"
-       sodipodi:nodetypes="czzzczc" />
-    <g
-       style="opacity:1;display:inline;enable-background:new"
-       id="g8011"
-       transform="translate(780.74553,74.55825)">
-      <path
-         transform="translate(-329.81481,0)"
-         clip-path="url(#clipPath3999)"
-         sodipodi:nodetypes="czzczzzszc"
-         id="path8013"
-         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
-         style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
-      <path
-         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
-         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
-         sodipodi:ry="134.00607"
-         sodipodi:rx="64.715881"
-         sodipodi:cy="338.07648"
-         sodipodi:cx="183.57143"
-         id="path8015"
-         style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-      <path
-         transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
-         d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
-         sodipodi:ry="134.00607"
-         sodipodi:rx="64.715881"
-         sodipodi:cy="338.07648"
-         sodipodi:cx="183.57143"
-         id="path8017"
-         style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-      <path
-         transform="translate(-329.81481,3e-7)"
-         clip-path="url(#clipPath3999)"
-         sodipodi:nodetypes="czzczzzszc"
-         id="path8019"
-         d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
-    </g>
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       id="path8021"
-       sodipodi:cx="310.71429"
-       sodipodi:cy="398.07648"
-       sodipodi:rx="19.704132"
-       sodipodi:ry="19.704132"
-       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
-       transform="translate(452.55663,72.581273)" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
-       id="path8023"
-       sodipodi:cx="310.71429"
-       sodipodi:cy="398.07648"
-       sodipodi:rx="19.704132"
-       sodipodi:ry="19.704132"
-       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
-       transform="translate(450.55663,72.581273)" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       id="path8025"
-       sodipodi:cx="310.71429"
-       sodipodi:cy="398.07648"
-       sodipodi:rx="19.704132"
-       sodipodi:ry="19.704132"
-       d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
-       transform="translate(450.55663,72.581273)" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
-       id="path8027"
-       sodipodi:cx="429.56738"
-       sodipodi:cy="377.42877"
-       sodipodi:rx="72.079735"
-       sodipodi:ry="44.547726"
-       d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
-       transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
-       inkscape:transform-center-x="-47.231976"
-       inkscape:transform-center-y="-3.6935079" />
-    <path
-       sodipodi:type="arc"
-       style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
-       id="path8029"
-       sodipodi:cx="437.6991"
-       sodipodi:cy="391.21735"
-       sodipodi:rx="36.611931"
-       sodipodi:ry="22.627417"
-       d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
-       transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
-       inkscape:transform-center-x="-20.955902"
-       inkscape:transform-center-y="-13.056625" />
-    <g
-       transform="translate(450.03125,73.843964)"
-       id="g8031"
-       style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
-      <path
-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
-         sodipodi:ry="3.2142856"
-         sodipodi:rx="3.2142856"
-         sodipodi:cy="401.82648"
-         sodipodi:cx="413.66071"
-         id="path8033"
-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-      <path
-         transform="translate(13.125009,8.1249913)"
-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
-         sodipodi:ry="3.2142856"
-         sodipodi:rx="3.2142856"
-         sodipodi:cy="401.82648"
-         sodipodi:cx="413.66071"
-         id="path8035"
-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-      <path
-         transform="translate(32.946437,7.4999913)"
-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
-         sodipodi:ry="3.2142856"
-         sodipodi:rx="3.2142856"
-         sodipodi:cy="401.82648"
-         sodipodi:cx="413.66071"
-         id="path8037"
-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-      <path
-         transform="translate(24.910723,-10.267866)"
-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
-         sodipodi:ry="3.2142856"
-         sodipodi:rx="3.2142856"
-         sodipodi:cy="401.82648"
-         sodipodi:cx="413.66071"
-         id="path8039"
-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-      <path
-         transform="translate(47.589294,-0.6250087)"
-         d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
-         sodipodi:ry="3.2142856"
-         sodipodi:rx="3.2142856"
-         sodipodi:cy="401.82648"
-         sodipodi:cx="413.66071"
-         id="path8041"
-         style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-         sodipodi:type="arc" />
-    </g>
-    <path
-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
-       id="path8043"
-       sodipodi:nodetypes="ccccccccc" />
-    <path
-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
-       id="path8045"
-       sodipodi:nodetypes="cccccccccccc" />
-    <path
-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
-       id="path8047"
-       sodipodi:nodetypes="ccccccccccccc" />
-    <path
-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
-       d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
-       id="path8049"
-       clip-path="url(#clipPath8514)"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
-       id="path8051" />
-    <path
-       style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
-       d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
-       id="path8053"
-       clip-path="url(#clipPath8610)"
-       sodipodi:nodetypes="cccccscccc"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
-       id="path8055"
-       sodipodi:nodetypes="czzzzzzczczczczzzc" />
-    <path
-       style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
-       d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
-       id="path8057"
-       clip-path="url(#clipPath8622)"
-       sodipodi:nodetypes="cccccccccc"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
-       d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
-       id="path8059"
-       clip-path="url(#clipPath8906)"
-       sodipodi:nodetypes="cczcccccc"
-       transform="translate(276,136)" />
-    <path
-       transform="translate(450.03125,73.843964)"
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
-       d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
-       id="path8061"
-       sodipodi:nodetypes="cccccccccccc"
-       clip-path="url(#clipPath3602)" />
-    <path
-       style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
-       d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
-       id="path8063"
-       sodipodi:nodetypes="czzzzzzzzcc" />
-    <path
-       transform="translate(450.03125,73.843964)"
-       style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
-       d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
-       id="path8065"
-       sodipodi:nodetypes="czczzcc"
-       clip-path="url(#clipPath3992)" />
-    <g
-       transform="translate(450.03125,73.843964)"
-       style="opacity:1;display:inline;enable-background:new"
-       id="g8067"
-       clip-path="url(#clipPath3986)">
-      <g
-         transform="translate(-174.03125,62.156036)"
-         style="filter:url(#filter3677)"
-         id="g8069">
-        <g
-           style="filter:url(#filter3785)"
-           id="g8071">
-          <path
-             sodipodi:nodetypes="czzccccc"
-             id="path8073"
-             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-             transform="translate(174.03125,-62.156036)" />
-          <rect
-             y="486.14224"
-             x="1197.8389"
-             height="309.71277"
-             width="333.75412"
-             id="rect8075"
-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-        </g>
-      </g>
-      <g
-         transform="translate(-174.03125,62.156036)"
-         style="opacity:0.18000004;display:inline;enable-background:new"
-         id="g8077">
-        <g
-           style="filter:url(#filter3785)"
-           id="g8079">
-          <path
-             sodipodi:nodetypes="czzccccc"
-             id="path8081"
-             d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
-             style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-             transform="translate(174.03125,-62.156036)" />
-          <rect
-             y="486.14224"
-             x="1197.8389"
-             height="309.71277"
-             width="333.75412"
-             id="rect8083"
-             style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-        </g>
-      </g>
-    </g>
-    <path
-       transform="translate(450.03125,73.843964)"
-       style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
-       d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
-       id="path8085"
-       clip-path="url(#clipPath3722)"
-       sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
-    <g
-       style="opacity:1;display:inline;enable-background:new"
-       id="g8087"
-       mask="url(#mask7704)"
-       transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
-       inkscape:transform-center-x="-185.09603"
-       inkscape:transform-center-y="-12.859654">
-      <path
-         transform="translate(8.0045714e-2,-3.125e-2)"
-         style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-         d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
-         id="path8089"
-         sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
-      <g
-         clip-path="url(#clipPath7421)"
-         id="g8091">
-        <path
-           id="path8093"
-           d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
-           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
-        <path
-           id="path8095"
-           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
-        <path
-           id="path8097"
-           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
-        <path
-           id="path8099"
-           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
-        <path
-           id="path8101"
-           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
-           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
-        <path
-           id="path8103"
-           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
-        <path
-           id="path8105"
-           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
-        <path
-           id="path8107"
-           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
-        <path
-           id="path8109"
-           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
-        <path
-           id="path8111"
-           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
-        <path
-           id="path8113"
-           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
-        <path
-           id="path8115"
-           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
-        <path
-           id="path8117"
-           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
-        <path
-           id="path8119"
-           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
-           style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
-        <g
-           id="g8121"
-           style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
-          <path
-             sodipodi:nodetypes="czzzczzc"
-             id="path8123"
-             d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
-          <path
-             sodipodi:nodetypes="czzzczzc"
-             id="path8125"
-             d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             sodipodi:nodetypes="czzzczzc"
-             id="path8127"
-             d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             sodipodi:nodetypes="czzzczzc"
-             id="path8129"
-             d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-4.3190906"
-             inkscape:transform-center-x="13.852145"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8131"
-             d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-4.3190906"
-             inkscape:transform-center-x="13.852145"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8133"
-             d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-4.3190906"
-             inkscape:transform-center-x="13.852145"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8135"
-             d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-4.9269042"
-             inkscape:transform-center-x="13.64141"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8137"
-             d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.1542119"
-             inkscape:transform-center-x="13.55068"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8139"
-             d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.4740887"
-             inkscape:transform-center-x="13.41151"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8141"
-             d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.79376"
-             inkscape:transform-center-x="13.258805"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8143"
-             d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8145"
-             d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8147"
-             d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8149"
-             d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8151"
-             d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8153"
-             d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8155"
-             d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8157"
-             d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8159"
-             d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8161"
-             d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.7433893"
-             inkscape:transform-center-x="13.28378"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8163"
-             d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-5.1360724"
-             inkscape:transform-center-x="13.55813"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8165"
-             d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-4.6370147"
-             inkscape:transform-center-x="13.74758"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8167"
-             d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             inkscape:transform-center-y="-4.4842392"
-             inkscape:transform-center-x="13.79933"
-             sodipodi:nodetypes="czzzczzc"
-             id="path8169"
-             d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
-          <path
-             sodipodi:nodetypes="czczc"
-             id="path8171"
-             d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
-             style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
-        </g>
-        <path
-           id="path8173"
-           d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
-           sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
-        <path
-           id="path8175"
-           d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
-        <path
-           id="path8177"
-           d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
-        <path
-           id="path8179"
-           d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
-        <path
-           id="path8181"
-           d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
-           sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
-        <path
-           id="path8183"
-           d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
-        <path
-           id="path8185"
-           d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
-        <path
-           id="path8187"
-           d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
-        <path
-           id="path8189"
-           d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
-        <path
-           id="path8191"
-           d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
-        <path
-           id="path8193"
-           d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
-        <path
-           id="path8195"
-           d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
-        <path
-           id="path8197"
-           d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
-        <path
-           id="path8199"
-           d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
-           style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
-      </g>
-    </g>
-    <path
-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
-       id="path8201"
-       sodipodi:nodetypes="ccccccccc" />
-    <path
-       style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
-       id="path8203"
-       sodipodi:nodetypes="ccccccccccc" />
-  </g>
-  <g
-     inkscape:groupmode="layer"
-     id="layer15"
-     inkscape:label="Feet"
-     style="display:inline">
-    <path
-       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
-       d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
-       id="path8994" />
-    <path
-       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
-       id="path4189"
-       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
-    <path
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
-       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
-       id="path4191"
-       sodipodi:nodetypes="cccccccccccccccccccccc"
-       clip-path="url(#clipPath3631)"
-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
-    <path
-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
-       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
-       id="path4193"
-       clip-path="url(#clipPath3677)"
-       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
-    <g
-       id="g3617"
-       clip-path="url(#clipPath3622)"
-       transform="translate(276,136)">
-      <path
-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
-         id="path4195"
-         d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
-      <path
-         sodipodi:nodetypes="ccccccccccccc"
-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
-         id="path4197"
-         d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
-    </g>
-    <path
-       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
-       d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
-       id="path4199"
-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
-    <path
-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
-       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
-       id="path4201"
-       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
-       clip-path="url(#clipPath4177)"
-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
-    <path
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
-       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
-       id="path4203"
-       sodipodi:nodetypes="cccccccc"
-       clip-path="url(#clipPath3631)"
-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
-    <path
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
-       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
-       id="path4205"
-       sodipodi:nodetypes="cccccccc"
-       clip-path="url(#clipPath3631)"
-       transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
-    <g
-       id="g8317"
-       style="filter:url(#filter8333)"
-       clip-path="url(#clipPath8338)"
-       transform="translate(276,136)">
-      <path
-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
-         clip-path="none"
-         sodipodi:nodetypes="ccccc"
-         id="path4209"
-         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <rect
-         y="757.19519"
-         x="-55"
-         height="177"
-         width="182"
-         id="rect8315"
-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-    </g>
-    <g
-       id="g8346"
-       style="filter:url(#filter8354)"
-       clip-path="url(#clipPath8359)"
-       transform="translate(276,136)">
-      <path
-         transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
-         clip-path="none"
-         sodipodi:nodetypes="ccccccc"
-         id="path4207"
-         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <rect
-         y="696.19519"
-         x="-22"
-         height="176"
-         width="165"
-         id="rect8344"
-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-    </g>
-  </g>
-  <g
-     inkscape:groupmode="layer"
-     id="layer16"
-     inkscape:label="Left Foot"
-     style="display:inline">
-    <path
-       style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
-       d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
-       id="path8848"
-       sodipodi:nodetypes="czzzzzzcccccccccczczz" />
-    <path
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
-       d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
-       id="path3635"
-       sodipodi:nodetypes="cccccccccccccccccccccc"
-       clip-path="url(#clipPath3631)"
-       transform="translate(276,136)" />
-    <path
-       transform="translate(450.03125,73.843964)"
-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
-       d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
-       id="path3669"
-       clip-path="url(#clipPath3677)"
-       sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
-    <g
-       id="g3628"
-       clip-path="url(#clipPath3636)"
-       transform="translate(276,136)">
-      <path
-         id="path8988"
-         d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
-      <path
-         id="path8990"
-         d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
-    </g>
-    <path
-       style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
-       d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
-       id="path8992" />
-    <path
-       transform="translate(450.03125,73.843964)"
-       style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
-       d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
-       id="path4149"
-       sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
-       clip-path="url(#clipPath4177)" />
-    <path
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
-       d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
-       id="path3902"
-       sodipodi:nodetypes="cccccccc"
-       clip-path="url(#clipPath3631)"
-       transform="translate(276,136)" />
-    <path
-       style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
-       d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
-       id="path4135"
-       sodipodi:nodetypes="cccccccc"
-       clip-path="url(#clipPath3631)"
-       transform="translate(276,136)" />
-    <g
-       id="g8367"
-       style="filter:url(#filter8379)"
-       clip-path="url(#clipPath8392)"
-       transform="translate(276,136)">
-      <path
-         clip-path="none"
-         sodipodi:nodetypes="ccccccc"
-         id="path4145"
-         d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <rect
-         y="650.19098"
-         x="877.51953"
-         height="172.53406"
-         width="123.03658"
-         id="rect8365"
-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-    </g>
-    <g
-       id="g8400"
-       style="filter:url(#filter8404)"
-       clip-path="url(#clipPath8417)"
-       transform="translate(276,136)">
-      <path
-         clip-path="none"
-         sodipodi:nodetypes="ccccc"
-         id="path4147"
-         d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
-         style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-      <rect
-         y="677.06104"
-         x="924.89569"
-         height="125.1579"
-         width="142.12846"
-         id="rect8398"
-         style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
-    </g>
-  </g>
-</svg>
diff --git a/Documentation/logo.txt b/Documentation/logo.txt
index a2e62445e28..296f0f7f67e 100644
--- a/Documentation/logo.txt
+++ b/Documentation/logo.txt
@@ -1,4 +1,13 @@
-Tux is taking a three month sabbatical to work as a barber, so Tuz is
-standing in.  He's taken pains to ensure you'll hardly notice.
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet).  It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist. 
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+	http://www.isc.tamu.edu/~lewing/linux/
 
-Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.
diff --git a/drivers/video/logo/logo_linux_clut224.ppm b/drivers/video/logo/logo_linux_clut224.ppm
index de93ff3fc1a..3c14e43b82f 100644
--- a/drivers/video/logo/logo_linux_clut224.ppm
+++ b/drivers/video/logo/logo_linux_clut224.ppm
@@ -1,2828 +1,1604 @@
 P3
-145 113
+# Standard 224-color Linux logo
+80 80
 255
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  3 4 4  6 7 7
-8 10 10  8 10 10  6 8 8  6 7 7  3 4 4  2 2 2
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  4 5 5  17 18 17
-27 29 28  35 37 36  40 43 41  43 45 43  40 43 41  37 39 37
-32 34 33  27 30 29  23 25 24  17 21 21  15 18 18  12 15 15
-11 13 13  8 10 10  6 7 7  3 4 4  1 1 1  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  13 13 13  32 34 33  49 51 48  60 60 56  58 59 55
-55 57 54  55 56 53  49 51 48  43 45 43  39 40 39  33 37 35
-28 31 30  23 27 26  20 23 23  17 20 20  14 17 17  13 16 16
-11 14 14  10 13 13  10 12 12  9 11 11  8 10 10  6 7 7
-2 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  6 7 7  12 15 15
-12 15 15  8 9 9  2 3 3  0 0 0  1 1 1  25 27 26
-55 56 53  68 70 65  65 66 61  65 66 61  63 64 60  63 64 60
-58 59 55  51 52 50  47 48 46  41 42 42  35 37 36  30 32 31
-26 28 27  20 24 24  18 22 22  16 19 19  14 17 17  13 16 16
-12 15 15  11 14 14  10 13 13  10 12 12  9 11 11  8 10 10
-8 9 9  6 8 8  3 3 3  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  6 7 7  20 24 24  23 27 26
-23 27 26  18 22 22  11 13 13  23 24 24  61 63 57  72 73 67
-72 73 67  68 70 65  68 70 65  68 70 65  63 64 60  58 59 55
-55 56 53  47 48 46  41 42 42  35 37 36  30 32 31  26 28 27
-20 24 24  18 22 22  16 20 20  15 19 19  14 17 17  13 16 16
-12 15 15  12 15 15  11 14 14  10 13 13  10 12 12  9 11 11
-8 10 10  8 9 9  7 9 9  6 7 7  1 2 2  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  1 1 1  4 5 5  5 6 5  4 5 5
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  15 19 19  40 41 39  53 55 47
-33 36 34  27 30 29  51 52 50  72 73 67  72 73 67  72 73 67
-72 73 67  68 70 65  68 70 65  63 64 60  58 59 55  51 52 50
-47 48 46  40 43 41  33 37 35  30 32 31  26 28 27  20 24 24
-18 22 22  17 21 21  16 19 19  14 18 18  14 17 17  13 17 17
-13 16 16  12 15 15  12 15 15  11 14 14  10 13 13  10 12 12
-9 11 11  8 10 10  8 9 9  7 9 9  6 8 8  3 4 4
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-2 2 2  6 8 8  10 12 12  10 12 12  10 12 12  10 12 12
-6 8 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  20 23 23  71 71 57  131 127 93
-115 113 82  63 64 60  72 73 67  72 73 67  72 73 67  72 73 67
-68 70 65  65 66 61  61 63 57  55 57 54  49 51 48  43 45 43
-39 40 39  33 36 34  28 31 30  23 27 26  20 24 24  20 23 23
-17 21 21  16 20 20  15 19 19  15 18 18  14 18 18  14 17 17
-13 17 17  13 16 16  12 15 15  12 15 15  11 14 14  10 13 13
-10 12 12  9 11 11  8 10 10  7 9 9  7 9 9  6 8 8
-4 5 5  0 0 0  0 0 0  0 0 0  1 1 1  6 7 7
-10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
-10 12 12  3 4 4  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  18 22 22  71 71 57  144 139 99
-84 83 72  68 70 65  72 73 67  72 73 67  68 70 65  65 66 61
-63 64 60  55 57 54  51 52 50  47 48 46  40 43 41  35 37 36
-30 32 31  27 29 28  23 27 26  20 24 24  18 22 22  17 21 21
-16 20 20  15 19 19  15 19 19  15 19 19  15 18 18  14 18 18
-14 17 17  13 17 17  13 16 16  12 15 15  12 15 15  11 14 14
-10 13 13  9 12 12  9 11 11  8 10 10  7 9 9  6 8 8
-6 8 8  3 4 4  0 0 0  2 2 2  8 10 10  10 12 12
-10 12 12  10 12 12  11 13 13  36 38 35  61 61 53  48 49 45
-10 12 12  7 9 9  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  15 19 19  61 61 53  84 83 72
-68 70 65  72 73 67  68 70 65  68 70 65  63 64 60  58 59 55
-51 52 50  47 48 46  41 42 42  37 39 37  32 35 33  28 31 30
-23 27 26  20 24 24  20 23 23  18 22 22  17 21 21  17 21 21
-17 21 21  17 21 21  17 20 20  16 20 20  16 20 20  16 19 19
-15 18 18  14 18 18  13 17 17  13 16 16  12 15 15  12 15 15
-11 14 14  10 13 13  9 12 12  9 11 11  8 10 10  7 9 9
-6 8 8  6 8 8  5 6 5  9 11 11  10 12 12  10 12 12
-19 20 18  82 81 62  149 145 103  160 154 106  142 137 94  96 95 69
-10 12 12  10 12 12  1 1 1  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  10 12 12  44 46 43  68 70 65
-72 73 67  68 70 65  68 70 65  63 64 60  55 57 54  49 51 48
-43 45 43  39 40 39  33 37 35  30 32 31  26 28 27  23 27 26
-20 24 24  18 22 22  18 22 22  18 22 22  18 22 22  20 23 23
-20 24 24  23 25 24  23 25 24  22 24 23  20 23 23  18 22 22
-17 20 20  15 19 19  15 18 18  14 17 17  13 16 16  12 15 15
-11 14 14  11 13 13  10 12 12  9 11 11  8 10 10  8 9 9
-7 9 9  7 9 9  10 12 12  10 12 12  10 12 12  71 71 57
-164 159 111  186 182 128  186 182 128  171 165 117  151 147 98  96 95 69
-10 12 12  10 12 12  3 3 3  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  8 10 10  63 64 60  68 70 65
-72 73 67  68 70 65  63 64 60  55 57 54  47 48 46  40 43 41
-33 37 35  30 32 31  27 29 28  23 27 26  20 24 24  20 23 23
-18 22 22  18 22 22  20 23 22  21 25 23  23 27 26  27 29 28
-28 31 30  31 33 31  31 33 31  31 33 31  28 31 30  26 28 27
-23 25 24  20 23 22  16 20 20  15 18 18  14 17 17  13 16 16
-12 15 15  11 14 14  10 13 13  10 12 12  9 11 11  8 10 10
-10 12 12  10 13 13  10 12 12  12 14 14  96 95 69  165 161 109
-186 182 128  192 187 134  192 187 134  176 171 126  160 154 106  103 101 77
-10 12 12  10 12 12  5 6 5  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  35 37 36  68 70 65  72 73 67
-68 70 65  65 66 61  58 59 55  49 51 48  40 43 41  33 37 35
-28 31 30  23 27 26  20 24 24  20 23 23  18 22 22  18 22 22
-18 22 22  20 23 23  23 27 26  27 30 29  32 35 33  37 39 37
-40 43 41  44 46 43  46 47 43  44 46 43  40 43 41  36 38 35
-31 33 31  27 29 28  22 24 23  17 21 21  15 18 18  14 17 17
-13 16 16  12 15 15  11 14 14  11 14 14  11 13 13  13 16 16
-13 16 16  11 14 14  10 12 12  79 78 62  142 137 94  164 159 111
-178 174 128  192 187 134  192 187 134  176 171 126  160 154 106  96 95 69
-10 12 12  10 12 12  6 7 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  55 57 54  68 70 65  72 73 67
-68 70 65  63 64 60  55 56 53  43 45 43  35 37 36  28 31 30
-23 27 26  20 24 24  18 22 22  17 21 21  17 21 21  17 21 21
-20 24 24  25 27 26  31 33 31  38 39 37  46 47 43  53 55 47
-61 61 53  66 65 55  66 65 55  66 65 55  61 61 53  53 55 47
-46 47 43  37 39 37  30 33 30  24 26 24  17 21 21  15 18 18
-13 17 17  12 15 15  12 15 15  13 16 16  14 18 18  14 18 18
-14 17 17  12 15 15  30 31 28  118 116 76  134 131 96  160 154 106
-174 170 121  178 174 128  178 174 128  171 165 117  151 147 98  96 95 69
-10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  63 64 60  68 70 65  68 70 65
-65 66 61  58 59 55  49 51 48  39 40 39  30 32 31  23 27 26
-20 24 24  18 22 22  17 21 21  16 20 20  17 21 21  20 23 23
-25 27 26  32 35 33  43 44 41  53 55 47  66 65 55  75 75 61
-82 81 62  84 83 72  87 86 72  87 86 72  82 81 62  75 75 61
-66 65 55  53 55 47  40 41 39  31 33 31  23 25 24  17 20 20
-14 18 18  13 16 16  12 15 15  12 15 15  13 17 17  14 18 18
-14 18 18  13 16 16  46 47 43  96 95 69  125 122 87  142 137 94
-160 154 106  165 161 109  164 159 111  155 149 109  142 137 94  75 75 61
-10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  60 60 56  68 70 65  68 70 65
-63 64 60  55 57 54  46 47 45  35 37 36  27 30 29  23 25 24
-18 22 22  17 21 21  16 20 20  17 21 21  18 22 22  23 27 26
-31 33 31  43 44 41  55 56 53  71 71 57  84 83 72  92 91 72
-103 101 77  92 91 72  82 81 62  82 81 62  87 86 72  92 91 72
-84 83 72  71 71 57  55 56 53  43 44 41  30 33 30  22 24 23
-16 19 19  14 17 17  12 15 15  12 15 15  13 16 16  14 18 18
-14 18 18  14 17 17  43 44 41  82 81 62  118 116 76  125 122 87
-142 137 94  144 139 99  144 139 99  134 131 96  118 116 76  53 55 47
-10 12 12  10 12 12  6 8 8  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  47 48 46  63 64 60  63 64 60
-55 57 54  49 51 48  40 43 41  32 34 33  26 28 27  20 24 24
-18 22 22  16 20 20  16 20 20  17 21 21  20 24 24  28 31 30
-40 41 39  53 55 47  75 75 61  90 89 73  87 86 72  48 49 45
-14 14 13  2 2 2  1 2 2  1 1 1  1 1 1  2 2 2
-19 20 18  43 44 41  66 65 55  53 55 47  38 39 37  26 28 27
-18 22 22  14 18 18  13 16 16  12 15 15  12 15 15  13 17 17
-14 18 18  14 18 18  30 31 28  66 65 55  96 95 69  103 101 77
-118 116 76  118 116 76  118 116 76  118 116 76  103 101 77  36 38 35
-10 12 12  10 12 12  6 7 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  28 31 30  55 57 54  51 52 50
-49 51 48  41 42 42  35 37 36  28 31 30  23 27 26  20 23 23
-17 21 21  16 20 20  16 20 20  18 22 22  23 27 26  33 36 34
-48 49 45  71 71 57  82 81 62  43 44 41  8 9 9  6 7 7
-6 7 7  6 7 7  6 7 7  5 6 5  4 5 5  3 4 4
-2 3 3  1 2 2  4 5 4  36 38 35  48 49 45  32 35 33
-21 25 23  16 19 19  13 17 17  12 15 15  12 15 15  13 16 16
-14 18 18  14 18 18  16 18 16  36 38 35  61 61 53  82 81 62
-96 95 69  96 95 69  96 95 69  96 95 69  79 78 62  19 20 18
-10 12 12  10 12 12  4 5 5  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  13 13 13  46 47 45  43 45 43
-40 43 41  35 37 36  30 32 31  23 27 26  20 24 24  18 22 22
-17 21 21  16 20 20  17 21 21  20 23 23  27 30 29  40 41 39
-61 61 53  53 55 47  16 17 16  9 11 11  10 12 12  10 12 12
-10 12 12  10 12 12  10 12 12  9 11 11  8 10 10  8 9 9
-6 8 8  5 6 5  4 5 5  2 3 3  19 20 18  38 39 37
-26 28 27  17 21 21  14 17 17  13 16 16  12 15 15  12 15 15
-13 17 17  14 18 18  12 15 15  13 12 7  30 31 28  46 47 43
-53 55 47  66 65 55  66 65 55  53 55 47  36 38 35  10 12 12
-10 12 12  10 12 12  2 3 3  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  1 1 1  33 37 35  35 37 36
-32 35 33  28 31 30  23 27 26  20 24 24  18 22 22  17 21 21
-16 20 20  16 20 20  17 21 21  21 25 23  31 33 31  44 46 43
-31 33 31  11 13 13  12 14 14  12 15 15  13 16 16  14 17 17
-14 17 17  14 17 17  14 17 17  13 16 16  12 15 15  12 14 14
-11 13 13  9 11 11  8 10 10  6 8 8  4 5 5  17 18 17
-30 33 30  20 23 22  15 18 18  13 16 16  12 15 15  12 14 14
-13 16 16  14 17 17  14 18 18  11 12 11  7 7 5  16 17 12
-21 22 20  30 31 28  25 27 25  21 22 20  14 14 13  10 12 12
-10 12 12  9 11 11  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  18 22 22  27 30 29
-27 29 28  40 41 39  53 55 47  53 55 47  53 55 47  46 47 43
-25 27 25  16 20 20  17 21 21  23 25 24  31 33 31  20 20 20
-12 15 15  14 17 17  15 19 19  16 20 20  17 21 21  18 22 22
-18 22 22  18 22 22  18 22 22  17 21 21  17 21 21  16 19 19
-15 18 18  13 16 16  12 15 15  10 12 12  8 10 10  6 8 8
-21 22 21  22 24 23  15 19 19  13 17 17  13 16 16  12 15 15
-12 15 15  13 17 17  14 18 18  14 18 18  13 15 14  10 9 6
-7 7 5  7 7 5  7 7 5  9 11 11  10 12 12  10 12 12
-10 12 12  6 7 7  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  16 17 12  82 81 62
-118 116 76  118 116 76  161 156 96  161 156 96  161 156 96  118 116 76
-118 116 76  96 95 69  53 55 47  22 24 23  14 17 17  13 16 16
-15 19 19  17 21 21  18 22 22  20 24 24  20 24 24  23 27 26
-23 27 26  23 27 26  23 27 26  23 27 26  23 27 26  20 24 24
-20 23 23  17 21 21  16 19 19  14 17 17  12 15 15  10 12 12
-9 11 11  20 23 22  16 19 19  14 17 17  13 16 16  12 15 15
-11 14 14  13 16 16  14 17 17  14 18 18  14 17 17  12 15 15
-10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
-9 11 11  1 1 1  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  53 55 47  161 156 96
-161 156 96  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  161 156 96  118 116 76  96 95 69  21 22 20  16 19 19
-18 22 22  20 24 24  23 27 26  23 27 26  26 28 27  27 30 29
-27 30 29  18 22 22  12 14 14  8 10 10  9 11 11  17 21 21
-23 27 26  23 27 26  20 24 24  18 22 22  16 20 20  14 17 17
-12 14 14  14 17 17  16 20 20  14 17 17  13 17 17  13 16 16
-12 15 15  12 15 15  13 17 17  14 18 18  14 17 17  13 16 16
-11 13 13  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
-4 5 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  13 12 7  118 116 76  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  161 156 96  118 116 76  30 31 28
-20 24 24  23 27 26  27 30 29  28 31 30  30 32 31  23 27 26
-16 19 19  17 21 21  12 15 15  9 11 11  10 12 12  9 11 11
-20 24 24  28 31 30  26 28 27  23 27 26  20 24 24  17 21 21
-15 19 19  13 16 16  16 19 19  14 18 18  14 17 17  13 16 16
-12 15 15  11 14 14  13 16 16  14 17 17  14 18 18  14 17 17
-12 15 15  10 12 12  10 12 12  10 12 12  10 12 12  8 9 9
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  82 81 62  161 156 96  230 229 82
-230 229 82  233 233 100  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  118 116 76
-27 29 28  27 30 29  30 32 31  30 32 31  23 27 26  20 24 24
-26 28 27  17 21 21  6 7 7  72 73 67  145 141 105  15 15 15
-14 17 17  33 37 35  30 32 31  28 31 30  26 28 27  23 27 26
-20 23 23  16 20 20  15 19 19  14 18 18  14 17 17  13 16 16
-12 15 15  11 14 14  12 15 15  13 17 17  14 18 18  14 17 17
-13 16 16  11 13 13  10 12 12  10 12 12  9 11 11  1 1 1
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  16 17 12  161 156 96  230 229 82  230 229 82
-243 242 120  235 234 117  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
-82 81 62  28 31 30  28 31 30  27 30 29  28 31 30  30 32 31
-33 37 35  13 16 16  3 3 3  105 104 92  210 208 158  12 14 14
-17 21 21  33 37 35  33 37 35  32 35 33  30 32 31  27 30 29
-23 27 26  20 23 23  17 20 20  15 18 18  14 18 18  13 17 17
-13 16 16  12 15 15  11 14 14  13 16 16  14 17 17  14 18 18
-13 17 17  12 15 15  10 12 12  10 12 12  3 4 4  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  96 95 69  230 229 82  230 229 82  244 244 132
-241 241 143  243 242 120  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-161 156 96  46 47 43  32 35 33  33 37 35  33 37 35  33 37 35
-40 43 41  23 27 26  1 1 1  2 2 2  24 26 24  14 17 17
-23 27 26  33 37 35  33 37 35  33 37 35  33 37 35  30 32 31
-27 30 29  23 27 26  20 23 23  15 18 18  14 18 18  14 17 17
-13 16 16  12 15 15  11 14 14  12 15 15  13 17 17  14 17 17
-14 17 17  13 16 16  11 13 13  6 8 8  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  16 17 12  161 156 96  230 229 82  235 234 117  239 239 170
-239 239 170  236 236 101  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  118 116 76  33 37 35  33 37 35  37 39 37  37 39 37
-43 45 43  49 51 48  20 24 24  8 10 10  17 20 20  35 37 36
-33 37 35  40 43 41  37 39 37  35 37 36  33 37 35  33 37 35
-30 32 31  27 30 29  23 27 26  15 19 19  14 18 18  14 17 17
-13 17 17  13 16 16  12 15 15  11 14 14  13 16 16  14 17 17
-14 17 17  13 17 17  11 14 14  4 5 5  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  96 95 69  230 229 82  230 229 82  239 239 170  251 251 187
-241 241 143  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  161 156 96  36 38 35  33 37 35  33 37 35  33 37 35
-37 39 37  47 48 46  55 57 54  55 57 54  49 51 48  43 45 43
-43 45 43  43 45 43  40 43 41  40 43 41  37 39 37  33 37 35
-33 37 35  28 31 30  26 28 27  16 20 20  15 18 18  14 18 18
-14 17 17  13 16 16  12 15 15  11 14 14  12 15 15  13 17 17
-14 17 17  14 17 17  8 10 10  5 7 7  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-16 17 12  230 229 82  230 229 82  243 242 120  251 251 187  251 251 187
-246 246 123  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  66 65 55  30 32 31  32 35 33  33 37 35
-33 37 35  37 39 37  40 43 41  47 48 46  49 51 48  51 52 50
-55 57 54  55 57 54  51 52 50  47 48 46  43 45 43  39 40 39
-33 37 35  30 32 31  26 28 27  17 21 21  15 19 19  14 18 18
-14 17 17  13 16 16  12 15 15  12 14 14  11 14 14  13 16 16
-14 17 17  12 15 15  7 9 9  6 8 8  1 1 1  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-96 95 69  230 229 82  230 229 82  239 239 170  251 251 187  239 239 170
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  96 95 69  27 30 29  28 31 30  30 32 31
-33 37 35  40 43 41  46 47 45  55 57 54  63 64 60  72 73 67
-72 73 67  72 73 67  72 73 67  65 66 61  55 57 54  47 48 46
-39 40 39  32 35 33  27 30 29  17 21 21  15 19 19  15 18 18
-14 18 18  13 17 17  13 16 16  12 15 15  11 14 14  12 14 14
-13 16 16  9 11 11  7 9 9  9 11 11  66 65 55  115 113 82
-21 22 20  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 12 7
-230 229 82  230 229 82  236 236 101  251 251 187  251 251 187  246 246 123
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  118 116 76  23 27 26  26 28 27  32 35 33
-51 52 50  90 89 73  110 109 94  145 141 105  168 163 120  177 172 135
-177 172 135  188 184 146  188 184 146  181 176 137  194 191 148  188 184 146
-184 179 149  188 184 146  188 184 146  156 151 111  177 172 135  181 176 137
-177 172 135  168 163 120  168 163 120  158 153 112  156 151 111  158 153 112
-156 151 111  158 153 112  177 172 135  188 184 146  188 184 146  194 189 146
-36 38 35  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  82 81 62
-230 229 82  230 229 82  244 244 132  251 251 187  244 244 132  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  82 81 62
-96 95 69  230 229 82  181 178 103  110 109 94  156 151 111  188 184 146
-188 184 146  197 193 154  188 184 146  184 181 136  188 184 146  168 163 120
-168 163 120  178 174 128  156 151 111  158 153 112  174 170 121  156 151 111
-156 151 111  158 153 112  156 151 111  168 163 120  178 174 128  181 176 137
-176 171 126  178 174 128  184 181 136  176 171 126  178 174 128  184 181 136
-176 171 126  178 174 128  184 181 136  164 159 111  155 149 109  96 95 69
-1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  2 2 1  161 156 96
-230 229 82  230 229 82  244 244 132  244 244 132  236 236 101  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  46 47 43  82 81 62
-158 153 112  197 193 154  194 189 146  184 181 136  188 184 146  168 163 120
-156 151 111  137 133 100  131 127 93  137 133 100  137 133 100  158 153 112
-121 119 87  137 133 100  156 151 111  145 141 105  99 98 80  84 83 72
-63 64 60  52 53 49  40 43 41  33 36 34  36 38 35  36 38 35
-38 39 37  43 44 41  43 44 41  46 47 43  48 49 45  48 49 45
-46 47 43  36 38 35  30 31 28  19 20 18  6 7 7  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  36 38 35  230 229 82
-230 229 82  230 229 82  246 246 123  236 236 101  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  53 55 47  121 119 87
-176 171 126  171 165 117  161 156 96  82 81 62  53 55 47  33 37 35
-39 40 39  63 64 60  99 98 80  121 119 87  137 133 100  177 172 135
-176 171 126  184 181 136  131 127 93  131 127 93  110 109 94  84 83 72
-51 52 50  39 40 39  27 29 28  18 22 22  16 19 19  15 19 19
-15 19 19  14 18 18  14 17 17  13 16 16  12 15 15  11 14 14
-10 13 13  9 12 12  9 11 11  8 9 9  7 9 9  1 1 1
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  118 116 76  230 229 82
-230 229 82  230 229 82  236 236 101  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  96 95 69  71 71 57
-36 38 35  118 116 76  118 116 76  12 15 15  15 18 18  20 24 24
-33 37 35  55 56 53  84 83 72  110 109 94  145 141 105  110 109 94
-168 163 120  121 119 87  156 151 111  131 127 93  87 86 72  61 63 57
-47 48 46  28 31 30  18 22 22  15 19 19  15 18 18  15 19 19
-15 19 19  14 18 18  14 17 17  13 17 17  13 16 16  12 15 15
-11 13 13  10 12 12  9 11 11  8 10 10  7 9 9  3 3 3
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  1 1 0  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
-161 156 96  230 229 82  118 116 76  11 14 14  14 17 17  18 22 22
-27 30 29  40 43 41  60 60 56  84 83 72  105 104 92  110 109 94
-110 109 94  110 109 94  99 98 80  90 89 73  68 70 65  47 48 46
-32 34 33  23 25 24  20 23 23  17 21 21  15 19 19  14 17 17
-15 19 19  15 18 18  14 18 18  13 17 17  13 16 16  12 15 15
-11 14 14  10 12 12  9 11 11  8 10 10  7 9 9  4 5 5
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  16 17 12  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  161 156 96  118 116 76  11 13 13  13 16 16  15 19 19
-20 24 24  30 32 31  40 43 41  51 52 50  63 64 60  72 73 67
-65 66 61  65 66 61  65 66 61  55 57 54  46 47 45  33 37 35
-27 29 28  20 24 24  17 21 21  16 20 20  16 20 20  15 19 19
-15 19 19  15 19 19  14 18 18  14 17 17  13 16 16  12 15 15
-11 14 14  10 13 13  9 12 12  8 10 10  7 9 9  6 7 7
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  53 55 47  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-161 156 96  118 116 76  53 55 47  10 13 13  12 15 15  14 17 17
-17 20 20  20 24 24  27 29 28  32 34 33  37 39 37  40 43 41
-43 45 43  41 42 42  35 37 36  30 32 31  28 31 30  23 27 26
-20 23 23  17 21 21  16 20 20  16 20 20  16 20 20  16 19 19
-15 19 19  15 19 19  14 18 18  14 17 17  13 16 16  12 15 15
-11 14 14  10 13 13  9 12 12  9 11 11  8 10 10  10 12 12
-1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  82 81 62  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  161 156 96
-118 116 76  82 81 62  13 14 12  10 13 13  12 15 15  13 17 17
-15 19 19  16 20 20  20 23 23  20 24 24  23 27 26  26 28 27
-26 28 27  26 28 27  23 27 26  18 22 22  20 23 23  17 21 21
-17 21 21  16 20 20  16 20 20  16 20 20  16 20 20  16 19 19
-15 19 19  15 19 19  15 18 18  14 17 17  13 17 17  13 16 16
-12 15 15  12 14 14  12 14 14  12 14 14  12 14 14  23 24 24
-6 8 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  118 116 76  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  161 156 96  161 156 96  118 116 76
-71 71 57  13 14 12  9 12 12  10 13 13  12 15 15  13 17 17
-15 18 18  15 19 19  16 20 20  17 21 21  17 21 21  18 22 22
-18 22 22  18 22 22  17 21 21  16 19 19  15 18 18  14 18 18
-16 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-15 19 19  15 19 19  15 18 18  14 18 18  16 20 20  23 25 24
-17 21 21  25 27 26  47 48 46  47 48 46  51 52 50  72 73 67
-33 36 34  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  118 116 76  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  161 156 96  118 116 76  118 116 76  46 47 43
-9 11 11  9 11 11  10 12 12  11 13 13  12 15 15  14 17 17
-15 18 18  15 19 19  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-15 19 19  16 20 20  20 24 24  55 56 53  32 34 33  84 83 72
-90 89 73  110 109 94  110 109 94  105 104 92  110 109 94  110 109 94
-72 73 67  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  96 95 69  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  161 156 96  118 116 76  82 81 62  16 17 12  9 11 11
-9 11 11  9 12 12  10 13 13  12 14 14  13 16 16  14 18 18
-15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 19 19  33 36 34  99 98 80  156 151 111  145 141 105  184 179 149
-168 163 120  184 179 149  177 172 135  156 151 111  145 141 105  110 109 94
-90 89 73  2 2 2  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  71 71 57  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  230 229 82
-230 229 82  161 156 96  230 229 82  230 229 82  230 229 82  161 156 96
-118 116 76  82 81 62  30 31 28  9 11 11  9 11 11  9 11 11
-10 12 12  10 13 13  11 14 14  13 16 16  14 17 17  15 18 18
-15 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-18 22 22  58 59 55  137 133 100  197 193 154  214 212 158  210 208 158
-197 193 154  184 179 149  184 179 149  137 133 100  110 109 94  99 98 80
-84 83 72  10 10 9  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  16 17 12  230 229 82  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  230 229 82  161 156 96
-161 156 96  161 156 96  161 156 96  161 156 96  118 116 76  71 71 57
-21 22 20  12 14 14  11 13 13  10 12 12  10 12 12  10 13 13
-11 13 13  12 15 15  13 16 16  14 17 17  14 18 18  15 19 19
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  17 21 21
-23 27 26  84 83 72  184 179 149  251 251 187  210 208 158  184 179 149
-184 179 149  156 151 111  110 109 94  84 83 72  63 64 60  51 52 50
-18 22 22  6 8 8  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  118 116 76  230 229 82
-230 229 82  230 229 82  230 229 82  230 229 82  161 156 96  161 156 96
-161 156 96  161 156 96  118 116 76  53 55 47  20 23 22  16 19 19
-13 16 16  12 15 15  12 14 14  11 14 14  11 14 14  11 14 14
-12 15 15  13 16 16  14 17 17  15 19 19  16 20 20  17 21 21
-23 27 26  18 22 22  20 24 24  23 27 26  30 32 31  17 21 21
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-23 27 26  33 37 35  137 133 100  156 151 111  158 153 112  105 104 92
-105 104 92  68 70 65  39 40 39  18 22 22  12 14 14  12 15 15
-9 11 11  4 5 5  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  16 17 12  230 229 82
-230 229 82  230 229 82  230 229 82  161 156 96  118 116 76  118 116 76
-118 116 76  66 65 55  43 45 43  32 34 33  25 27 26  20 23 22
-17 20 20  15 18 18  14 17 17  15 18 18  13 16 16  14 17 17
-14 18 18  16 20 20  32 34 33  55 57 54  58 59 55  72 73 67
-105 104 92  55 57 54  65 66 61  63 64 60  40 43 41  33 37 35
-41 42 42  20 24 24  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-17 21 21  26 28 27  30 32 31  35 37 36  68 70 65  39 40 39
-23 27 26  15 18 18  13 16 16  11 14 14  9 12 12  8 10 10
-7 9 9  6 7 7  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  36 38 35
-230 229 82  230 229 82  230 229 82  96 95 69  30 31 28  49 51 48
-90 89 73  68 70 65  55 57 54  47 48 46  47 48 46  43 45 43
-32 34 33  43 45 43  43 45 43  23 27 26  25 27 26  40 43 41
-40 43 41  90 89 73  110 109 94  145 141 105  156 151 111  156 151 111
-184 179 149  184 179 149  177 172 135  184 179 149  137 133 100  84 83 72
-105 104 92  63 64 60  49 51 48  47 48 46  28 31 30  18 22 22
-16 20 20  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  15 19 19  15 19 19  15 19 19  18 22 22  15 19 19
-13 16 16  12 15 15  11 14 14  10 13 13  9 12 12  9 11 11
-8 10 10  6 8 8  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-30 31 28  230 229 82  71 71 57  2 2 1  0 0 0  58 59 55
-105 104 92  84 83 72  65 66 61  84 83 72  110 109 94  110 109 94
-145 141 105  105 104 92  110 109 94  110 109 94  84 83 72  110 109 94
-158 153 112  197 193 154  197 193 154  239 239 170  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  197 193 154
-197 193 154  184 179 149  145 141 105  137 133 100  105 104 92  47 48 46
-20 23 23  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 19 19  15 19 19  15 19 19  14 18 18  14 17 17
-13 17 17  13 16 16  12 14 14  12 14 14  13 13 13  13 13 13
-13 13 13  12 12 12  10 10 9  6 7 7  2 2 2  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  1 1 0  0 0 0  0 0 0  65 66 61
-105 104 92  84 83 72  84 83 72  110 109 94  184 179 149  210 208 158
-210 208 158  210 208 158  214 212 158  197 193 154  214 212 158  210 208 158
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  239 239 170  251 251 187  184 179 149  84 83 72
-26 28 27  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  15 19 19  15 19 19  15 18 18  14 18 18
-13 17 17  13 16 16  15 15 15  14 14 13  14 14 13  14 14 13
-13 13 13  13 13 13  12 12 12  12 12 12  12 12 12  3 4 4
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  72 73 67
-105 104 92  99 98 80  84 83 72  99 98 80  177 172 135  197 193 154
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  214 212 158  197 193 154  99 98 80
-23 27 26  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  15 19 19  15 19 19  15 18 18  14 18 18
-14 17 17  16 16 16  16 16 16  16 16 16  15 15 15  14 14 13
-14 14 13  13 13 13  13 13 13  12 12 12  12 12 12  12 12 12
-3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  84 83 72
-110 109 94  99 98 80  72 73 67  63 64 60  99 98 80  177 172 135
-184 179 149  210 208 158  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  210 208 158  184 179 149  177 172 135  110 109 94  33 37 35
-17 21 21  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-16 20 20  16 20 20  15 19 19  15 19 19  15 19 19  14 18 18
-15 18 18  18 19 18  18 19 18  17 17 17  16 16 16  15 15 15
-14 14 13  13 13 13  13 13 13  12 12 12  12 12 12  12 12 12
-10 10 9  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  2 2 2  105 104 92
-108 107 93  99 98 80  72 73 67  63 64 60  51 52 50  87 86 72
-105 104 92  110 109 94  108 107 93  156 151 111  184 179 149  184 179 149
-197 193 154  197 193 154  197 193 154  184 179 149  184 179 149  177 172 135
-197 193 154  156 151 111  177 172 135  184 179 149  168 163 120  137 133 100
-145 141 105  110 109 94  99 98 80  47 48 46  55 57 54  15 19 19
-16 19 19  16 20 20  16 20 20  16 20 20  16 20 20  16 20 20
-17 20 20  17 21 21  16 20 20  16 19 19  15 19 19  16 19 19
-20 20 20  21 22 21  20 20 20  19 20 19  18 19 18  16 16 16
-15 15 15  14 14 13  13 13 13  13 13 13  12 12 12  12 12 12
-12 12 12  4 5 5  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  58 59 55  110 109 94
-105 104 92  90 89 73  72 73 67  55 57 54  43 45 43  39 40 39
-43 45 43  46 47 45  43 45 43  68 70 65  65 66 61  63 64 60
-108 107 93  72 73 67  105 104 92  90 89 73  72 73 67  40 43 41
-72 73 67  68 70 65  68 70 65  58 59 55  63 64 60  49 51 48
-43 45 43  33 36 34  27 30 29  20 24 24  16 20 20  15 19 19
-15 19 19  15 19 19  15 19 19  16 19 19  16 20 20  16 20 20
-17 21 21  20 24 24  20 23 22  17 21 21  17 20 20  20 20 20
-21 22 21  21 22 21  21 22 21  21 22 21  20 20 20  18 19 18
-16 16 16  15 15 15  13 13 13  13 13 13  12 12 12  12 12 12
-12 12 12  10 10 9  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  21 22 21  110 109 94  110 109 94
-105 104 92  84 83 72  68 70 65  51 52 50  41 42 42  33 37 35
-28 31 30  23 27 26  20 23 23  18 22 22  17 20 20  25 27 26
-26 28 27  27 30 29  25 27 26  20 23 23  23 27 26  30 32 31
-20 24 24  17 21 21  18 22 22  15 19 19  26 28 27  20 23 23
-14 18 18  15 19 19  15 18 18  15 19 19  15 19 19  15 19 19
-15 19 19  15 19 19  15 19 19  15 19 19  15 19 19  16 19 19
-16 20 20  22 24 23  24 26 24  22 24 23  20 23 22  22 24 23
-24 26 24  24 26 24  23 24 24  22 24 23  21 22 21  19 20 19
-17 17 17  15 15 15  14 14 13  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  2 2 2  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  2 2 2  99 98 80  110 109 94  108 107 93
-105 104 92  84 83 72  63 64 60  49 51 48  39 40 39  32 34 33
-27 30 29  23 25 24  20 23 23  17 20 20  15 19 19  14 18 18
-14 17 17  13 17 17  13 17 17  13 17 17  13 17 17  13 17 17
-14 17 17  14 17 17  14 17 17  14 17 17  14 17 17  14 17 17
-14 18 18  14 18 18  14 18 18  14 18 18  15 18 18  15 19 19
-15 19 19  15 19 19  15 19 19  15 19 19  15 19 19  15 19 19
-15 19 19  17 21 21  27 29 28  26 28 27  25 27 26  25 27 26
-27 29 28  27 29 28  26 28 27  24 26 24  21 22 21  20 20 20
-18 19 18  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  4 5 5  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  51 52 50  110 109 94  110 109 94  105 104 92
-90 89 73  72 73 67  55 57 54  43 45 43  35 37 36  30 32 31
-26 28 27  20 24 24  17 21 21  16 19 19  15 18 18  14 17 17
-13 16 16  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
-13 16 16  13 16 16  13 16 16  13 17 17  13 17 17  14 17 17
-14 17 17  14 17 17  14 17 17  14 18 18  14 18 18  14 18 18
-15 18 18  15 18 18  15 19 19  15 19 19  15 19 19  15 19 19
-15 19 19  15 19 19  27 29 28  32 34 33  28 31 30  27 29 28
-30 32 31  30 32 31  30 31 28  26 28 27  23 24 24  21 22 21
-19 20 19  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  3 3 3  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  10 10 9  108 107 93  110 109 94  108 107 93  99 98 80
-84 83 72  63 64 60  49 51 48  40 43 41  33 36 34  27 30 29
-23 27 26  18 22 22  17 20 20  15 18 18  14 17 17  13 16 16
-13 16 16  13 16 16  12 15 15  12 15 15  12 15 15  12 15 15
-13 16 16  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
-13 17 17  13 17 17  14 17 17  14 17 17  14 17 17  14 18 18
-14 18 18  14 18 18  15 18 18  15 18 18  15 19 19  15 19 19
-15 19 19  15 19 19  17 21 21  33 36 34  32 34 33  31 33 31
-33 36 34  33 36 34  31 33 31  27 29 28  25 27 26  21 22 21
-19 20 19  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  63 64 60  137 133 100  43 45 43  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  68 70 65  110 109 94  110 109 94  105 104 92  84 83 72
-68 70 65  55 57 54  43 45 43  35 37 36  30 32 31  26 28 27
-20 24 24  17 21 21  16 19 19  14 17 17  13 16 16  12 15 15
-12 15 15  12 15 15  12 15 15  12 15 15  12 15 15  12 15 15
-12 15 15  12 15 15  12 15 15  12 15 15  12 15 15  13 16 16
-13 16 16  13 16 16  13 16 16  13 17 17  13 17 17  14 17 17
-14 17 17  14 17 17  14 18 18  14 18 18  14 18 18  15 18 18
-15 19 19  15 19 19  15 19 19  20 24 24  32 34 33  35 37 36
-37 39 37  35 37 36  33 36 34  30 32 31  26 28 27  22 24 23
-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-1 1 1  99 98 80  184 179 149  184 179 149  68 70 65  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-15 15 15  110 109 94  110 109 94  108 107 93  99 98 80  72 73 67
-61 63 57  49 51 48  39 40 39  33 36 34  27 30 29  23 25 24
-18 22 22  16 19 19  14 17 17  13 16 16  12 15 15  12 15 15
-11 14 14  11 14 14  11 14 14  11 14 14  11 14 14  11 14 14
-11 14 14  11 14 14  12 14 14  12 15 15  12 15 15  12 15 15
-12 15 15  13 16 16  13 16 16  13 16 16  13 16 16  13 16 16
-13 17 17  14 17 17  14 17 17  14 17 17  14 18 18  14 18 18
-14 18 18  15 18 18  15 19 19  15 19 19  30 32 31  38 39 37
-39 40 39  39 40 39  35 37 36  31 33 31  27 29 28  22 24 23
-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 3 3
-110 109 94  197 193 154  210 208 158  184 179 149  68 70 65  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-68 70 65  110 109 94  110 109 94  105 104 92  84 83 72  65 66 61
-51 52 50  43 45 43  35 37 36  30 32 31  25 27 26  20 23 23
-17 20 20  15 18 18  13 16 16  12 15 15  12 15 15  11 14 14
-11 14 14  11 14 14  11 13 13  11 13 13  11 13 13  11 13 13
-11 14 14  11 14 14  11 14 14  11 14 14  11 14 14  11 14 14
-12 15 15  12 15 15  12 15 15  12 15 15  13 16 16  13 16 16
-13 16 16  13 16 16  13 17 17  13 17 17  14 17 17  14 17 17
-14 18 18  14 18 18  14 18 18  16 19 19  37 39 37  41 42 42
-41 42 42  41 42 42  38 39 37  32 34 33  27 29 28  23 24 24
-21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  8 8 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  11 11 11  137 133 100
-197 193 154  251 251 187  239 239 170  184 179 149  31 33 31  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  12 12 12
-110 109 94  110 109 94  105 104 92  90 89 73  72 73 67  58 59 55
-46 47 45  37 39 37  31 33 31  26 28 27  20 24 24  17 21 21
-15 18 18  13 16 16  12 15 15  12 14 14  11 13 13  11 13 13
-10 13 13  10 13 13  10 13 13  10 13 13  10 13 13  10 13 13
-10 13 13  10 13 13  11 13 13  11 13 13  11 14 14  11 14 14
-11 14 14  11 14 14  12 14 14  12 15 15  12 15 15  12 15 15
-13 16 16  13 16 16  13 16 16  13 16 16  13 17 17  13 17 17
-14 17 17  14 17 17  14 18 18  23 27 26  41 42 42  41 42 42
-43 45 43  41 42 42  39 40 39  33 36 34  27 29 28  23 24 24
-21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  27 29 28  168 163 120  210 208 158
-251 251 187  251 251 187  210 208 158  137 133 100  1 1 1  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  60 60 56
-110 109 94  105 104 92  105 104 92  84 83 72  65 66 61  51 52 50
-40 43 41  33 36 34  27 30 29  23 25 24  18 22 22  16 19 19
-14 17 17  12 15 15  11 14 14  11 14 14  10 13 13  10 13 13
-10 13 13  10 12 12  10 12 12  10 12 12  10 12 12  10 12 12
-10 12 12  10 12 12  10 13 13  10 13 13  10 13 13  11 13 13
-11 13 13  11 14 14  11 14 14  11 14 14  11 14 14  12 15 15
-12 15 15  12 15 15  12 15 15  13 16 16  13 16 16  13 16 16
-13 17 17  13 17 17  14 17 17  32 34 33  43 45 43  43 45 43
-43 45 43  43 45 43  39 40 39  33 36 34  27 29 28  23 24 24
-21 22 21  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  6 7 7  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  1 1 1  68 70 65  184 179 149  210 208 158  251 251 187
-251 251 187  214 212 158  184 179 149  37 39 37  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  6 7 7  105 104 92
-105 104 92  105 104 92  99 98 80  72 73 67  58 59 55  46 47 45
-35 37 36  30 32 31  25 27 26  20 23 23  16 19 19  14 17 17
-12 15 15  12 14 14  11 13 13  10 13 13  10 12 12  10 12 12
-10 12 12  10 12 12  9 12 12  9 12 12  9 12 12  9 12 12
-10 12 12  10 12 12  10 12 12  10 12 12  10 12 12  10 13 13
-10 13 13  10 13 13  11 13 13  11 13 13  11 14 14  11 14 14
-11 14 14  12 15 15  12 15 15  12 15 15  12 15 15  13 16 16
-13 16 16  13 16 16  17 20 20  41 42 42  46 47 45  46 47 45
-46 47 45  43 45 43  40 41 39  33 36 34  27 29 28  23 24 24
-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  4 5 5  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-15 15 15  110 109 94  197 193 154  214 212 158  251 251 187  251 251 187
-239 239 170  184 179 149  84 83 72  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  47 48 46  105 104 92
-105 104 92  99 98 80  84 83 72  68 70 65  51 52 50  40 43 41
-32 34 33  27 29 28  22 24 23  17 21 21  15 18 18  13 16 16
-12 15 15  11 13 13  10 13 13  10 12 12  9 12 12  9 12 12
-9 12 12  9 12 12  9 11 11  9 11 11  9 11 11  9 11 11
-9 12 12  9 12 12  9 12 12  9 12 12  10 12 12  10 12 12
-10 12 12  10 12 12  10 13 13  10 13 13  10 13 13  11 13 13
-11 14 14  11 14 14  11 14 14  12 14 14  12 15 15  12 15 15
-12 15 15  13 16 16  28 31 30  43 45 43  47 48 46  47 48 46
-47 48 46  43 45 43  40 41 39  33 36 34  27 29 28  22 24 23
-20 20 20  17 17 17  15 15 15  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  3 4 4  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  60 60 56
-177 172 135  197 193 154  251 251 187  251 251 187  251 251 187  251 251 187
-184 179 149  110 109 94  3 4 4  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  1 1 1  99 98 80  105 104 92
-99 98 80  87 86 72  84 83 72  63 64 60  46 47 45  35 37 36
-30 32 31  25 27 26  18 22 22  16 19 19  14 17 17  12 15 15
-11 14 14  10 13 13  9 12 12  9 12 12  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 12 12  9 12 12
-9 12 12  10 12 12  10 12 12  10 12 12  10 13 13  10 13 13
-10 13 13  11 13 13  11 14 14  11 14 14  11 14 14  12 15 15
-12 15 15  14 17 17  41 42 42  47 48 46  49 51 48  51 52 50
-47 48 46  43 45 43  40 41 39  33 36 34  27 29 28  22 24 23
-19 20 19  16 16 16  14 14 13  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  2 2 2  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  23 24 24  137 133 100  184 179 149
-210 208 158  251 251 187  251 251 187  251 251 187  251 251 187  184 179 149
-110 109 94  13 13 13  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  30 32 31  105 104 92  99 98 80
-84 83 72  84 83 72  72 73 67  55 57 54  41 42 42  32 34 33
-27 29 28  20 24 24  17 20 20  14 17 17  13 16 16  12 14 14
-10 13 13  10 12 12  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 12 12  9 12 12  10 12 12  10 12 12  10 12 12
-10 13 13  10 13 13  10 13 13  11 13 13  11 14 14  11 14 14
-11 14 14  27 29 28  55 56 53  72 73 67  51 52 50  51 52 50
-49 51 48  43 45 43  39 40 39  32 34 33  26 28 27  21 22 21
-19 20 19  16 16 16  18 19 17  13 13 13  12 12 12  12 12 12
-12 12 12  12 12 12  1 1 1  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  8 8 7  84 83 72  184 179 149  197 193 154  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  184 179 149  145 141 105
-19 20 19  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  14 14 13  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  72 73 67  105 104 92  84 83 72
-72 73 67  84 83 72  68 70 65  49 51 48  39 40 39  30 32 31
-25 27 26  18 22 22  15 18 18  13 16 16  12 15 15  11 13 13
-10 12 12  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 12 12  9 12 12  9 12 12
-10 12 12  10 12 12  10 12 12  10 13 13  10 13 13  11 13 13
-13 16 16  41 42 42  99 98 80  158 153 112  65 66 61  51 52 50
-49 51 48  43 45 43  39 40 39  31 33 31  25 27 26  21 22 21
-21 22 21  68 70 65  55 56 53  13 13 13  12 12 12  12 12 12
-12 12 12  11 11 11  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 3 3
-63 64 60  158 153 112  184 179 149  210 208 158  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  184 179 149  137 133 100  27 29 28
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-21 22 21  110 109 94  5 6 5  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  13 13 13  105 104 92  90 89 73  72 73 67
-68 70 65  84 83 72  63 64 60  46 47 45  35 37 36  27 29 28
-22 24 23  17 20 20  14 17 17  12 15 15  11 14 14  10 12 12
-10 12 12  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 12 12  9 12 12  10 12 12  10 12 12  10 13 13  10 13 13
-30 32 31  47 48 46  177 172 135  210 208 158  137 133 100  55 56 53
-49 51 48  43 45 43  38 39 37  31 33 31  25 27 26  22 24 23
-110 109 94  184 179 149  63 64 60  13 13 13  12 12 12  12 12 12
-12 12 12  8 9 9  0 0 0  1 1 1  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  21 22 21  105 104 92
-184 179 149  210 208 158  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  251 251 187  184 179 149  145 141 105  23 24 24  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-68 70 65  184 179 149  105 104 92  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  51 52 50  99 98 80  84 83 72  63 64 60
-68 70 65  72 73 67  55 57 54  41 42 42  32 34 33  25 27 26
-20 23 23  16 19 19  13 16 16  12 14 14  10 13 13  10 12 12
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 12 12  9 12 12  10 12 12  17 20 20
-46 47 45  72 73 67  210 208 158  251 251 187  210 208 158  63 64 60
-49 51 48  43 45 43  37 39 37  30 32 31  24 26 24  105 104 92
-210 208 158  197 193 154  47 48 46  13 13 13  12 12 12  12 12 12
-12 12 12  6 7 7  33 36 34  48 49 45  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  8 8 7  23 24 24  55 56 53  110 109 94
-210 208 158  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  184 179 149  110 109 94  20 20 20  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-110 109 94  251 251 187  210 208 158  47 48 46  0 0 0  0 0 0
-0 0 0  1 1 1  90 89 73  90 89 73  72 73 67  55 56 53
-72 73 67  68 70 65  51 52 50  37 39 37  28 31 30  23 25 24
-17 21 21  15 18 18  12 15 15  11 14 14  10 13 13  9 12 12
-9 11 11  9 11 11  9 11 11  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  9 11 11  9 11 11  9 11 11  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  9 12 12  13 16 16  41 42 42
-49 51 48  110 109 94  251 251 187  251 251 187  251 251 187  105 104 92
-49 51 48  43 45 43  35 37 36  30 31 28  47 48 46  197 193 154
-251 251 187  197 193 154  31 33 31  12 12 12  12 12 12  12 12 12
-12 12 12  51 52 50  184 179 149  72 73 67  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 2 2
-11 11 11  21 22 21  30 32 31  40 41 39  60 60 56  145 141 105
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
-184 179 149  110 109 94  13 13 13  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  4 5 4  61 61 53  48 49 45  3 4 3
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-156 151 111  251 251 187  251 251 187  184 179 149  11 11 11  0 0 0
-0 0 0  26 28 27  99 98 80  84 83 72  60 60 56  43 45 43
-72 73 67  65 66 61  49 51 48  35 37 36  27 29 28  20 24 24
-17 20 20  14 17 17  12 15 15  11 13 13  10 12 12  9 11 11
-9 11 11  9 11 11  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  9 11 11  9 11 11
-9 11 11  9 11 11  9 11 11  11 13 13  37 39 37  47 48 46
-51 52 50  184 179 149  251 251 187  251 251 187  251 251 187  145 141 105
-47 48 46  41 42 42  35 37 36  27 29 28  137 133 100  251 251 187
-251 251 187  197 193 154  19 20 19  12 12 12  12 12 12  12 12 12
-27 29 28  184 179 149  214 212 158  63 64 60  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  1 1 1  6 7 7  16 16 16  24 26 24
-30 32 31  38 39 37  47 48 46  55 57 54  68 70 65  110 109 94
-197 193 154  251 251 187  251 251 187  251 251 187  210 208 158  184 179 149
-105 104 92  8 8 7  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  65 66 61  184 179 149  156 151 111
-30 32 31  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-168 163 120  251 251 187  251 251 187  251 251 187  110 109 94  0 0 0
-0 0 0  60 60 56  84 83 72  68 70 65  51 52 50  38 39 37
-84 83 72  63 64 60  43 45 43  33 36 34  25 27 26  20 23 22
-15 18 18  13 16 16  12 14 14  10 13 13  9 12 12  9 11 11
-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-9 11 11  9 11 11  10 12 12  33 36 34  46 47 45  51 52 50
-72 73 67  210 208 158  251 251 187  251 251 187  251 251 187  177 172 135
-47 48 46  41 42 42  35 37 36  37 39 37  184 179 149  251 251 187
-251 251 187  197 193 154  13 13 13  12 12 12  12 12 12  12 12 12
-110 109 94  251 251 187  251 251 187  37 39 37  0 0 0  0 0 0
-0 0 0  21 22 20  2 2 1  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-4 5 5  12 12 12  21 22 21  25 27 26  30 32 31  38 39 37
-46 47 45  55 56 53  60 60 56  65 66 61  68 70 65  105 104 92
-110 109 94  197 193 154  210 208 158  197 193 154  184 179 149  84 83 72
-2 2 2  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  13 13 13  184 179 149  251 251 187
-197 193 154  43 44 41  0 0 0  0 0 0  0 0 0  0 0 0
-145 141 105  251 251 187  251 251 187  251 251 187  214 212 158  43 45 43
-2 2 2  84 83 72  72 73 67  58 59 55  41 42 42  38 39 37
-72 73 67  58 59 55  41 42 42  31 33 31  25 27 26  18 22 22
-14 17 17  12 15 15  12 14 14  10 12 12  9 12 12  9 11 11
-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  9 12 12  31 33 31  43 45 43  49 51 48  55 56 53
-110 109 94  251 251 187  251 251 187  251 251 187  251 251 187  168 163 120
-47 48 46  41 42 42  33 36 34  63 64 60  197 193 154  251 251 187
-251 251 187  184 179 149  13 13 13  12 12 12  12 12 12  16 16 16
-197 193 154  251 251 187  239 239 170  20 20 20  0 0 0  2 2 1
-108 107 93  110 109 94  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  1 1 1  4 5 5  11 11 11  18 19 18
-22 24 23  26 28 27  32 34 33  39 40 39  46 47 45  51 52 50
-55 57 54  60 60 56  63 64 60  63 64 60  63 64 60  58 59 55
-63 64 60  99 98 80  145 141 105  137 133 100  43 45 43  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  3 4 3  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  110 109 94  251 251 187
-251 251 187  184 179 149  25 27 26  0 0 0  0 0 0  0 0 0
-99 98 80  251 251 187  251 251 187  251 251 187  251 251 187  156 151 111
-25 27 26  84 83 72  65 66 61  47 48 46  32 34 33  39 40 39
-72 73 67  55 57 54  40 41 39  30 32 31  23 25 24  18 22 22
-14 17 17  12 15 15  11 13 13  10 12 12  9 11 11  9 11 11
-9 11 11  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-9 11 11  28 31 30  41 42 42  47 48 46  55 56 53  58 59 55
-137 133 100  251 251 187  251 251 187  251 251 187  210 208 158  137 133 100
-47 48 46  40 41 39  32 34 33  75 75 61  184 179 149  239 239 170
-251 251 187  177 172 135  13 13 13  12 12 12  12 12 12  43 44 41
-197 193 154  251 251 187  210 208 158  10 10 9  0 0 0  84 83 72
-251 251 187  84 83 72  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
-6 7 7  11 11 11  17 17 17  20 20 20  23 24 24  27 29 28
-32 34 33  38 39 37  43 45 43  47 48 46  51 52 50  55 56 53
-58 59 55  58 59 55  55 57 54  55 56 53  47 48 46  41 42 42
-35 37 36  31 33 31  47 48 46  14 14 13  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  66 65 55  99 98 80  20 20 20
-0 0 0  0 0 0  0 0 0  0 0 0  43 45 43  214 212 158
-251 251 187  251 251 187  145 141 105  3 3 3  0 0 0  0 0 0
-48 49 45  184 179 149  239 239 170  251 251 187  239 239 170  177 172 135
-84 83 72  72 73 67  55 56 53  39 40 39  26 28 27  39 40 39
-68 70 65  51 52 50  39 40 39  28 31 30  22 24 23  17 20 20
-14 17 17  12 14 14  10 13 13  9 11 11  9 11 11  9 11 11
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-27 29 28  40 41 39  46 47 45  51 52 50  55 57 54  63 64 60
-131 127 93  197 193 154  210 208 158  197 193 154  168 163 120  96 95 69
-47 48 46  40 41 39  32 34 33  71 71 57  145 141 105  184 179 149
-184 179 149  131 127 93  13 13 13  12 12 12  12 12 12  48 49 45
-168 163 120  184 179 149  156 151 111  6 7 7  14 14 13  177 172 135
-239 239 170  40 41 39  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  3 3 3  6 7 7  11 11 11  16 16 16
-18 19 18  21 22 21  23 24 24  27 29 28  32 34 33  37 39 37
-41 42 42  43 45 43  47 48 46  51 52 50  51 52 50  51 52 50
-51 52 50  49 51 48  46 47 45  40 41 39  32 34 33  25 27 26
-20 20 20  14 14 13  2 2 2  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  33 36 34  197 193 154  184 179 149
-41 42 42  0 0 0  0 0 0  0 0 0  3 3 3  184 179 149
-251 251 187  251 251 187  184 179 149  48 49 45  0 0 0  0 0 0
-16 17 12  121 119 87  177 172 135  194 189 146  188 184 146  145 141 105
-82 81 62  63 64 60  46 47 45  31 33 31  21 22 21  35 37 36
-68 70 65  51 52 50  37 39 37  27 30 29  22 24 23  17 20 20
-13 16 16  12 14 14  10 13 13  9 11 11  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  25 27 26
-38 39 37  43 45 43  51 52 50  55 56 53  60 60 56  63 64 60
-92 91 72  158 153 112  176 171 126  171 165 117  149 143 98  82 81 62
-44 46 43  38 39 37  30 32 31  71 71 57  131 127 93  160 154 106
-149 143 98  82 81 62  13 13 13  12 12 12  12 12 12  46 47 43
-121 119 87  134 131 96  96 95 69  7 7 6  38 39 37  131 127 93
-145 141 105  12 13 12  0 0 0  1 1 1  3 3 3  6 7 7
-10 10 9  12 12 12  14 14 13  16 16 16  18 19 18  21 22 21
-22 24 23  26 28 27  30 31 28  33 36 34  37 39 37  40 41 39
-41 42 42  43 45 43  46 47 45  46 47 45  46 47 45  43 45 43
-41 42 42  37 39 37  31 33 31  26 28 27  21 22 21  16 16 16
-6 7 7  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  177 172 135  251 251 187
-197 193 154  27 29 28  0 0 0  0 0 0  0 0 0  110 109 94
-239 239 170  239 239 170  184 179 149  87 86 72  2 2 1  0 0 0
-1 1 1  82 81 62  142 137 94  165 161 109  165 161 109  131 127 93
-75 75 61  55 56 53  37 39 37  25 27 26  19 20 19  32 34 33
-65 66 61  49 51 48  35 37 36  27 29 28  20 23 23  16 19 19
-13 16 16  13 13 13  10 12 12  9 11 11  8 10 10  8 10 10
-8 9 9  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  22 24 23  35 37 36
-41 42 42  47 48 46  55 56 53  58 59 55  63 64 60  65 66 61
-71 71 57  131 127 93  160 154 106  160 154 106  142 137 94  82 81 62
-46 47 43  40 41 39  33 36 34  66 65 55  125 122 87  149 143 98
-142 137 94  82 81 62  17 17 17  18 19 17  14 14 13  46 47 43
-118 116 76  125 122 87  96 95 69  16 17 12  71 71 57  103 101 77
-82 81 62  11 11 11  11 11 11  13 13 13  14 14 13  14 14 13
-15 15 15  16 16 16  17 17 17  19 20 19  21 22 21  23 24 24
-26 28 27  27 29 28  31 33 31  33 36 34  35 37 36  38 39 37
-39 40 39  39 40 39  38 39 37  37 39 37  35 37 36  31 33 31
-27 29 28  24 26 24  21 22 21  17 17 17  12 12 12  2 2 2
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  68 70 65  251 251 187
-251 251 187  156 151 111  2 2 1  0 0 0  0 0 0  43 44 41
-177 172 135  184 179 149  158 153 112  103 101 77  19 20 18  0 0 0
-0 0 0  46 47 43  131 127 93  160 154 106  160 154 106  131 127 93
-71 71 57  43 45 43  30 32 31  21 22 21  16 16 16  26 28 27
-63 64 60  47 48 46  35 37 36  26 28 27  20 23 23  16 19 19
-13 16 16  13 13 13  10 12 12  9 11 11  8 10 10  8 10 10
-7 9 9  7 9 9  8 9 9  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  20 20 20  33 36 34  40 41 39
-46 47 45  51 52 50  55 57 54  60 60 56  63 64 60  65 66 61
-66 65 55  118 116 76  151 147 98  165 161 109  151 147 98  121 119 87
-96 95 69  96 95 69  96 95 69  103 101 77  142 137 94  151 147 98
-142 137 94  103 101 77  82 81 62  82 81 62  82 81 62  96 95 69
-131 127 93  142 137 94  103 101 77  46 47 43  96 95 69  118 116 76
-71 71 57  14 14 13  14 14 13  15 15 15  15 15 15  16 16 16
-16 16 16  17 17 17  18 19 18  20 20 20  21 22 21  23 24 24
-25 27 26  27 29 28  30 31 28  30 32 31  31 33 31  31 33 31
-31 33 31  31 33 31  30 31 28  27 29 28  25 27 26  22 24 23
-20 20 20  16 16 16  13 13 13  6 7 7  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-58 59 55  68 70 65  8 8 7  0 0 0  10 10 9  210 208 158
-251 251 187  184 179 149  38 39 37  0 0 0  0 0 0  8 8 7
-103 101 77  149 143 98  149 143 98  118 116 76  40 41 39  25 27 25
-53 55 47  82 81 62  144 139 99  165 161 109  165 161 109  142 137 94
-71 71 57  35 37 36  24 26 24  18 19 18  15 15 15  22 24 23
-63 64 60  46 47 45  33 36 34  26 28 27  20 23 22  17 18 17
-12 15 15  11 13 13  10 12 12  9 11 11  8 10 10  8 10 10
-7 9 9  7 9 9  7 9 9  7 9 9  8 9 9  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  16 16 16  30 31 28  35 37 36  41 42 42
-47 48 46  55 56 53  58 59 55  63 64 60  65 66 61  65 66 61
-61 61 53  103 101 77  151 147 98  171 165 117  171 165 117  168 163 120
-158 153 112  158 153 112  155 149 109  151 147 98  151 147 98  160 154 106
-151 147 98  149 143 98  142 137 94  149 143 98  149 143 98  149 143 98
-155 149 109  151 147 98  131 127 93  103 101 77  125 122 87  118 116 76
-71 71 57  16 16 16  16 16 16  16 16 16  17 17 17  17 17 17
-17 17 17  17 17 17  18 19 18  19 20 19  20 20 20  21 22 21
-23 24 24  24 26 24  25 27 26  26 28 27  26 28 27  26 28 27
-25 27 26  24 26 24  22 24 23  21 22 21  19 20 19  16 16 16
-14 14 13  8 8 7  1 1 1  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-20 20 20  184 179 149  168 163 120  21 22 21  0 0 0  105 104 92
-177 172 135  145 141 105  71 71 57  0 0 0  0 0 0  0 0 0
-66 65 55  131 127 93  151 147 98  142 137 94  118 116 76  121 119 87
-145 141 105  158 153 112  176 171 126  178 174 128  176 171 126  149 145 103
-96 95 69  31 33 31  21 22 21  16 16 16  14 14 13  18 19 18
-60 60 56  46 47 45  33 36 34  25 27 26  21 22 21  15 18 18
-12 15 15  11 13 13  9 11 11  8 10 10  8 10 10  8 9 9
-7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  8 9 9
-8 9 9  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  10 12 12  26 28 27  31 33 31  38 39 37  43 45 43
-51 52 50  55 56 53  60 60 56  63 64 60  65 66 61  68 70 65
-63 64 60  96 95 69  158 153 112  178 174 128  188 184 146  194 189 146
-194 189 146  188 184 146  184 181 136  176 171 126  171 165 117  173 167 111
-173 167 111  165 161 109  171 165 117  174 170 121  176 171 126  178 174 128
-178 174 128  174 170 121  160 154 106  149 143 98  149 143 98  125 122 87
-71 71 57  16 16 16  16 16 16  17 17 17  17 17 17  17 17 17
-17 17 17  17 17 17  17 17 17  18 19 18  19 20 19  20 20 20
-21 22 21  21 22 21  21 22 21  22 24 23  21 22 21  21 22 21
-21 22 21  19 20 19  18 19 18  16 16 16  14 14 13  11 11 11
-3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  105 104 92  197 193 154  110 109 94  9 9 8  36 38 35
-121 119 87  131 127 93  96 95 69  18 19 17  30 31 28  66 65 55
-96 95 69  142 137 94  160 154 106  160 154 106  160 154 106  168 163 120
-184 181 136  194 191 148  197 193 154  197 193 154  194 189 146  168 163 120
-125 122 87  46 47 43  18 19 18  15 15 15  13 13 13  14 14 13
-55 57 54  43 45 43  32 34 33  25 27 26  18 22 22  17 17 17
-12 14 14  10 12 12  9 11 11  8 10 10  8 9 9  7 9 9
-6 8 8  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
-7 9 9  8 9 9  8 9 9  8 10 10  8 10 10  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  32 34 33  41 42 42  35 37 36  39 40 39  37 39 37
-35 37 36  55 57 54  60 60 56  63 64 60  65 66 61  65 66 61
-61 63 57  115 113 82  168 163 120  194 191 148  204 201 155  210 208 158
-210 208 158  210 208 158  197 193 154  194 189 146  186 182 128  176 171 126
-174 170 121  176 171 126  186 182 128  190 186 136  194 191 148  197 193 154
-197 193 154  188 184 146  181 176 137  174 170 121  165 161 109  142 137 94
-82 81 62  24 26 24  16 16 16  16 16 16  16 16 16  16 16 16
-17 17 17  17 17 17  17 17 17  17 17 17  18 19 18  19 20 19
-19 20 19  19 20 19  20 20 20  19 20 19  19 20 19  18 19 18
-17 17 17  15 15 15  13 13 13  12 12 12  6 7 7  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  17 18 17  137 133 100  115 113 82  53 55 47  19 20 18
-103 101 77  144 139 99  137 133 100  115 113 82  137 133 100  156 151 111
-158 153 112  164 159 111  171 165 117  174 170 121  178 174 128  194 189 146
-204 201 155  214 212 158  214 212 158  214 212 158  210 208 158  188 184 146
-158 153 112  87 86 72  17 17 17  13 13 13  13 13 13  15 15 15
-55 56 53  43 45 43  32 34 33  24 26 24  17 20 20  16 16 16
-12 14 14  10 12 12  8 10 10  8 10 10  7 9 9  6 8 8
-6 8 8  6 8 8  6 8 8  7 9 9  7 9 9  7 9 9
-7 9 9  7 9 9  7 9 9  7 9 9  8 9 9  8 10 10
-8 10 10  8 10 10  8 10 10  8 10 10  8 10 10  8 10 10
-8 10 10  110 109 94  84 83 72  49 51 48  26 28 27  8 10 10
-8 9 9  51 52 50  58 59 55  63 64 60  63 64 60  63 64 60
-66 65 55  134 131 96  181 176 137  210 208 158  214 212 158  239 239 170
-239 239 170  224 223 159  210 208 158  204 201 155  194 189 146  186 182 128
-186 182 128  184 181 136  194 189 146  204 201 155  210 208 158  210 208 158
-210 208 158  210 208 158  197 193 154  190 186 136  176 171 126  155 149 109
-118 116 76  36 38 35  15 15 15  16 16 16  16 16 16  16 16 16
-16 16 16  16 16 16  16 16 16  16 16 16  16 16 16  17 17 17
-17 17 17  17 17 17  17 17 17  16 16 16  16 16 16  15 15 15
-13 13 13  12 12 12  8 8 7  2 2 2  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  53 55 47  103 101 77  96 95 69  53 55 47
-103 101 77  158 153 112  177 172 135  184 179 149  188 184 146  197 193 154
-194 189 146  190 186 136  184 181 136  184 181 136  194 189 146  210 208 158
-214 212 158  239 239 170  251 251 187  251 251 187  224 223 159  204 201 155
-177 172 135  121 119 87  30 31 28  13 13 13  12 12 12  39 40 39
-60 60 56  43 45 43  32 34 33  23 25 24  18 19 18  13 16 16
-13 13 13  9 11 11  8 10 10  8 9 9  6 8 8  6 8 8
-6 8 8  6 8 8  6 8 8  6 8 8  6 8 8  7 9 9
-7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
-7 9 9  8 9 9  8 9 9  8 10 10  8 10 10  8 10 10
-14 17 17  197 193 154  158 153 112  55 57 54  7 9 9  7 9 9
-8 10 10  51 52 50  58 59 55  60 60 56  63 64 60  63 64 60
-71 71 57  155 149 109  194 191 148  214 212 158  251 251 187  251 251 187
-251 251 187  251 251 187  239 239 170  210 208 158  197 193 154  190 186 136
-190 186 136  194 189 146  204 201 155  210 208 158  224 223 159  239 239 170
-239 239 170  224 223 159  210 208 158  204 201 155  190 186 136  164 159 111
-125 122 87  40 41 39  15 15 15  15 15 15  15 15 15  15 15 15
-16 16 16  16 16 16  16 16 16  16 16 16  16 16 16  16 16 16
-16 16 16  16 16 16  15 15 15  14 14 13  13 13 13  12 12 12
-8 9 9  3 3 3  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  21 22 20  96 95 69  125 122 87  121 119 87
-144 139 99  177 172 135  197 193 154  210 208 158  214 212 158  214 212 158
-210 208 158  204 201 155  194 191 148  194 189 146  204 201 155  214 212 158
-239 239 170  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
-188 184 146  145 141 105  53 55 47  12 12 12  15 15 15  63 64 60
-63 64 60  41 42 42  31 33 31  23 24 24  17 18 17  12 15 15
-11 13 13  9 11 11  8 9 9  7 9 9  6 8 8  6 8 8
-6 7 7  6 7 7  6 8 8  6 8 8  6 8 8  6 8 8
-6 8 8  7 9 9  7 9 9  7 9 9  7 9 9  7 9 9
-7 9 9  7 9 9  7 9 9  7 9 9  7 9 9  8 8 7
-43 45 43  251 251 187  156 151 111  8 10 10  7 9 9  7 9 9
-21 22 21  51 52 50  55 56 53  55 57 54  58 59 55  58 59 55
-75 75 61  158 153 112  197 193 154  224 223 159  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  214 212 158  204 201 155  194 189 146
-190 186 136  197 193 154  210 208 158  224 223 159  251 251 187  251 251 187
-251 251 187  251 251 187  239 239 170  210 208 158  197 193 154  176 171 126
-125 122 87  36 38 35  14 14 13  14 14 13  15 15 15  15 15 15
-15 15 15  15 15 15  15 15 15  15 15 15  15 15 15  15 15 15
-15 15 15  14 14 13  13 13 13  12 12 12  10 10 9  3 4 4
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  7 7 5  71 71 57  131 127 93  158 153 112
-177 172 135  197 193 154  214 212 158  239 239 170  251 251 187  251 251 187
-238 237 168  210 208 158  204 201 155  197 193 154  204 201 155  214 212 158
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  214 212 158
-197 193 154  156 151 111  66 65 55  12 12 12  37 39 37  58 59 55
-58 59 55  41 42 42  31 33 31  22 24 23  17 17 17  12 14 14
-10 12 12  8 10 10  6 8 8  6 8 8  6 7 7  6 7 7
-6 7 7  5 7 7  6 7 7  6 7 7  6 8 8  6 8 8
-6 8 8  6 8 8  6 8 8  7 9 9  7 9 9  7 9 9
-7 9 9  6 8 8  6 8 8  6 8 8  6 8 8  6 8 8
-61 63 57  197 193 154  16 19 19  6 8 8  6 8 8  8 9 9
-41 42 42  47 48 46  51 52 50  51 52 50  55 56 53  55 56 53
-71 71 57  158 153 112  197 193 154  224 223 159  251 251 187  251 251 187
-251 251 187  251 251 187  239 239 170  214 212 158  204 201 155  194 189 146
-190 186 136  197 193 154  210 208 158  239 239 170  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  224 223 159  204 201 155  177 172 135
-121 119 87  30 31 28  13 13 13  14 14 13  14 14 13  14 14 13
-14 14 13  14 14 13  15 15 15  15 15 15  14 14 13  13 13 13
-12 12 12  12 12 12  10 10 9  4 5 5  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  48 49 45  131 127 93  174 170 121
-194 189 146  210 208 158  239 239 170  251 251 187  251 251 187  251 251 187
-251 251 187  214 212 158  204 201 155  197 193 154  204 201 155  210 208 158
-239 239 170  251 251 187  251 251 187  251 251 187  239 239 170  214 212 158
-194 191 148  156 151 111  71 71 57  19 20 19  51 52 50  51 52 50
-51 52 50  41 42 42  30 32 31  21 22 21  17 17 17  13 13 13
-9 11 11  8 9 9  6 8 8  6 7 7  6 7 7  5 7 7
-5 6 5  5 6 5  5 7 7  5 7 7  6 7 7  6 7 7
-6 8 8  6 8 8  6 8 8  6 7 7  6 7 7  6 7 7
-6 7 7  6 8 8  6 8 8  6 8 8  6 8 8  6 8 8
-55 56 53  43 45 43  6 8 8  6 8 8  6 8 8  47 48 46
-60 60 56  47 48 46  46 47 45  47 48 46  38 39 37  10 12 12
-66 65 55  145 141 105  197 193 154  214 212 158  251 251 187  251 251 187
-251 251 187  251 251 187  224 223 159  210 208 158  194 191 148  184 181 136
-184 181 136  194 189 146  204 201 155  224 223 159  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  181 176 137
-115 113 82  21 22 20  13 13 13  13 13 13  13 13 13  13 13 13
-14 14 13  13 13 13  13 13 13  13 13 13  12 12 12  11 11 11
-10 10 9  6 7 7  1 1 1  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  2 2 1  66 65 55  144 139 99  178 174 128
-204 201 155  214 212 158  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  214 212 158  204 201 155  194 191 148  197 193 154  204 201 155
-214 212 158  239 239 170  239 239 170  239 239 170  214 212 158  210 208 158
-184 181 136  149 145 103  66 65 55  41 42 42  47 48 46  46 47 45
-43 45 43  39 40 39  28 31 30  21 22 21  16 16 16  10 12 12
-8 10 10  6 8 8  6 7 7  6 7 7  5 6 5  5 6 5
-5 6 5  5 6 5  5 6 5  5 6 5  5 7 7  5 7 7
-6 7 7  6 7 7  6 7 7  5 7 7  5 7 7  5 7 7
-5 7 7  6 7 7  6 7 7  6 7 7  6 7 7  6 8 8
-6 8 8  6 8 8  6 7 7  6 7 7  46 47 45  156 151 111
-105 104 92  58 59 55  43 45 43  32 34 33  6 8 8  6 8 8
-49 51 48  125 122 87  181 176 137  204 201 155  214 212 158  239 239 170
-239 239 170  214 212 158  210 208 158  197 193 154  181 176 137  176 171 126
-176 171 126  184 181 136  197 193 154  210 208 158  239 239 170  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  177 172 135
-99 98 80  13 13 13  12 12 12  12 12 12  13 13 13  12 12 12
-12 12 12  12 12 12  11 11 11  11 11 11  8 9 9  4 5 5
-1 1 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  1 1 0  61 61 53  142 137 94  181 176 137
-204 201 155  224 223 159  251 251 187  251 251 187  251 251 187  251 251 187
-251 251 187  214 212 158  197 193 154  190 186 136  184 181 136  188 184 146
-197 193 154  204 201 155  210 208 158  210 208 158  204 201 155  194 189 146
-176 171 126  134 131 96  66 65 55  43 45 43  41 42 42  39 40 39
-35 37 36  33 36 34  27 29 28  20 20 20  15 15 15  9 11 11
-8 9 9  6 7 7  5 6 5  5 6 5  4 5 5  4 5 5
-4 5 5  4 5 5  4 5 5  4 5 5  5 6 5  4 5 5
-4 5 5  5 6 5  4 5 5  5 6 5  5 6 5  5 6 5
-5 7 7  5 7 7  5 7 7  5 7 7  5 7 7  5 7 7
-6 7 7  6 7 7  6 7 7  28 31 30  184 179 149  184 179 149
-145 141 105  84 83 72  27 29 28  5 7 7  5 6 5  16 16 16
-43 44 41  96 95 69  158 153 112  188 184 146  204 201 155  210 208 158
-204 201 155  197 193 154  184 179 149  177 172 135  168 163 120  164 159 111
-164 159 111  174 170 121  184 181 136  197 193 154  214 212 158  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  210 208 158  177 172 135
-71 71 57  11 11 11  12 12 12  11 11 11  11 11 11  11 11 11
-10 10 9  10 10 9  8 8 7  3 4 4  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  31 33 31  121 119 87  176 171 126
-197 193 154  214 212 158  251 251 187  251 251 187  251 251 187  251 251 187
-239 239 170  210 208 158  194 189 146  178 174 128  174 170 121  176 171 126
-177 172 135  181 176 137  184 179 149  184 179 149  181 176 137  178 174 128
-158 153 112  121 119 87  53 55 47  37 39 37  33 36 34  30 32 31
-27 29 28  25 27 26  24 26 24  19 20 19  13 13 13  8 10 10
-6 8 8  6 7 7  5 6 5  4 5 5  4 5 5  4 5 5
-4 5 5  4 5 5  4 5 5  3 4 4  3 4 4  4 5 5
-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
-5 6 5  5 6 5  5 6 5  5 6 5  5 6 5  5 6 5
-5 6 5  5 6 5  12 14 14  145 141 105  184 179 149  177 172 135
-90 89 73  21 22 21  5 6 5  5 6 5  4 5 5  37 39 37
-38 39 37  61 61 53  134 131 96  168 163 120  184 181 136  188 184 146
-184 179 149  177 172 135  168 163 120  164 159 111  155 149 109  151 147 98
-151 147 98  164 159 111  176 171 126  184 179 149  210 208 158  239 239 170
-251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  158 153 112
-46 47 43  10 10 9  10 10 9  10 10 9  8 9 9  8 9 9
-6 7 7  3 3 3  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  13 12 7  82 81 62  158 153 112
-188 184 146  210 208 158  239 239 170  251 251 187  251 251 187  251 251 187
-224 223 159  204 201 155  184 181 136  171 165 117  164 159 111  160 154 106
-158 153 112  164 159 111  168 163 120  168 163 120  168 163 120  164 159 111
-142 137 94  96 95 69  43 44 41  27 29 28  26 28 27  23 24 24
-21 22 21  18 19 18  17 17 17  18 19 18  13 13 13  8 8 7
-6 7 7  5 6 5  4 5 5  3 4 4  3 4 4  3 4 4
-3 4 4  3 4 4  3 3 3  3 3 3  3 4 4  3 4 4
-3 4 4  3 4 4  4 5 5  4 5 5  4 5 5  4 5 5
-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
-4 5 5  4 5 5  4 5 5  4 5 5  31 33 31  65 66 61
-37 39 37  38 39 37  96 95 69  144 139 99  168 163 120  174 170 121
-168 163 120  164 159 111  155 149 109  149 145 103  149 143 98  142 137 94
-149 143 98  151 147 98  164 159 111  177 172 135  197 193 154  210 208 158
-251 251 187  251 251 187  251 251 187  239 239 170  197 193 154  137 133 100
-24 26 24  8 9 9  8 9 9  8 8 7  6 7 7  2 2 2
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  46 47 43  125 122 87
-176 171 126  197 193 154  210 208 158  239 239 170  251 251 187  239 239 170
-214 212 158  197 193 154  181 176 137  164 159 111  151 147 98  149 143 98
-149 143 98  149 143 98  149 145 103  155 149 109  160 154 106  149 143 98
-118 116 76  82 81 62  30 31 28  21 22 21  19 20 19  17 17 17
-14 14 13  12 12 12  10 10 9  12 12 12  10 12 12  6 8 8
-4 5 5  3 4 4  3 4 4  3 4 4  3 3 3  3 3 3
-3 3 3  3 3 3  3 3 3  3 3 3  2 3 3  2 3 3
-3 4 4  3 4 4  3 4 4  3 4 4  3 4 4  4 5 5
-4 5 5  3 4 4  3 4 4  3 4 4  3 4 4  3 4 4
-4 5 5  4 5 5  4 5 5  4 5 5  4 5 5  4 5 5
-4 5 5  3 4 4  3 4 4  23 24 24  110 109 94  72 73 67
-39 40 39  22 24 23  46 47 43  103 101 77  142 137 94  155 149 109
-160 154 106  155 149 109  149 143 98  142 137 94  142 137 94  142 137 94
-142 137 94  149 143 98  155 149 109  176 171 126  184 179 149  210 208 158
-239 239 170  251 251 187  251 251 187  214 212 158  184 179 149  105 104 92
-10 10 9  6 7 7  3 4 4  1 1 1  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  12 12 9  82 81 62
-149 145 103  181 176 137  197 193 154  210 208 158  214 212 158  214 212 158
-210 208 158  197 193 154  177 172 135  158 153 112  149 143 98  142 137 94
-142 137 94  142 137 94  149 143 98  151 147 98  151 147 98  131 127 93
-103 101 77  71 71 57  22 24 23  15 15 15  13 13 13  11 11 11
-8 9 9  6 7 7  6 7 7  4 5 5  8 9 9  6 7 7
-4 5 5  3 3 3  3 3 3  3 3 3  3 3 3  2 2 2
-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 3 3
-2 3 3  2 3 3  2 3 3  3 4 4  3 4 4  3 4 4
-3 4 4  3 4 4  3 3 3  3 4 4  3 4 4  3 4 4
-3 4 4  3 4 4  3 4 4  3 4 4  3 4 4  3 4 4
-3 4 4  3 4 4  21 22 21  145 141 105  145 141 105  72 73 67
-17 18 17  3 4 4  21 22 20  66 65 55  118 116 76  142 137 94
-149 143 98  151 147 98  149 143 98  142 137 94  142 137 94  142 137 94
-142 137 94  149 143 98  155 149 109  168 163 120  184 179 149  210 208 158
-239 239 170  251 251 187  251 251 187  210 208 158  177 172 135  71 71 57
-3 3 3  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  36 38 35
-115 113 82  158 153 112  181 176 137  197 193 154  204 201 155  210 208 158
-204 201 155  188 184 146  177 172 135  164 159 111  149 145 103  142 137 94
-142 137 94  142 137 94  149 143 98  151 147 98  149 143 98  125 122 87
-96 95 69  61 61 53  16 17 12  8 9 9  8 8 7  6 7 7
-4 5 5  3 4 4  3 3 3  3 3 3  3 3 3  5 6 5
-3 4 4  2 3 3  2 2 2  2 2 2  2 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  1 2 2
-2 2 2  2 2 2  2 3 3  2 3 3  2 3 3  2 3 3
-3 3 3  3 3 3  3 3 3  3 3 3  3 3 3  3 3 3
-3 3 3  2 3 3  2 3 3  3 4 4  3 4 4  3 4 4
-3 4 4  3 4 4  3 4 4  8 9 9  8 8 7  3 3 3
-3 3 3  3 3 3  9 9 8  36 38 35  82 81 62  118 116 76
-142 137 94  151 147 98  151 147 98  151 147 98  149 143 98  149 143 98
-149 143 98  151 147 98  160 154 106  176 171 126  188 184 146  210 208 158
-239 239 170  251 251 187  239 239 170  210 208 158  156 151 111  31 33 31
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 7 5
-66 65 55  125 122 87  158 153 112  181 176 137  194 189 146  197 193 154
-197 193 154  184 179 149  177 172 135  168 163 120  156 151 111  151 147 98
-151 147 98  151 147 98  151 147 98  161 156 96  149 143 98  118 116 76
-82 81 62  53 55 47  12 12 9  4 5 5  3 4 4  3 3 3
-3 3 3  3 3 3  2 2 2  2 2 2  1 1 1  1 2 2
-3 3 3  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
-1 1 1  1 1 1  1 1 1  1 1 1  1 2 2  1 2 2
-1 2 2  1 2 2  1 2 2  2 2 2  2 2 2  2 3 3
-2 3 3  2 3 3  2 3 3  2 3 3  2 2 2  2 2 2
-2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  2 3 3
-2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  3 3 3
-3 3 3  3 3 3  72 73 67  61 61 53  53 55 47  96 95 69
-131 127 93  151 147 98  161 156 96  161 156 96  151 147 98  151 147 98
-161 156 96  160 154 106  164 159 111  177 172 135  197 193 154  210 208 158
-239 239 170  251 251 187  224 223 159  197 193 154  131 127 93  9 9 8
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-24 26 24  82 81 62  131 127 93  164 159 111  178 174 128  188 184 146
-188 184 146  188 184 146  181 176 137  176 171 126  168 163 120  164 159 111
-160 154 106  160 154 106  160 154 106  160 154 106  151 147 98  125 122 87
-82 81 62  61 61 53  12 12 9  3 3 3  3 3 3  2 2 2
-2 2 2  1 1 1  1 1 1  1 1 1  0 0 0  0 0 0
-0 0 0  2 2 2  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 2 2  1 2 2  1 2 2  1 2 2
-1 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
-2 3 3  2 3 3  2 3 3  2 3 3  2 3 3  2 3 3
-2 3 3  30 32 31  72 73 67  31 33 31  36 38 35  82 81 62
-118 116 76  149 143 98  161 156 96  161 156 96  161 156 96  160 154 106
-165 161 109  165 161 109  176 171 126  188 184 146  204 201 155  214 212 158
-239 239 170  239 239 170  214 212 158  184 179 149  82 81 62  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-2 2 2  43 44 41  96 95 69  131 127 93  160 154 106  176 171 126
-184 181 136  184 181 136  184 181 136  181 176 137  178 174 128  174 170 121
-171 165 117  173 167 111  173 167 111  173 167 111  160 154 106  131 127 93
-96 95 69  66 65 55  16 17 12  2 2 2  1 1 1  1 1 1
-1 1 1  1 1 1  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  10 9 6  30 31 28  71 71 57
-118 116 76  149 143 98  165 161 109  165 161 109  165 161 109  173 167 111
-173 167 111  176 171 126  184 181 136  197 193 154  210 208 158  224 223 159
-251 251 187  239 239 170  210 208 158  168 163 120  40 41 39  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  13 12 7  61 61 53  96 95 69  131 127 93  160 154 106
-176 171 126  184 181 136  184 181 136  188 184 146  184 181 136  184 181 136
-184 181 136  186 182 128  186 182 128  178 174 128  174 170 121  149 145 103
-118 116 76  82 81 62  21 22 20  1 1 1  1 1 1  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 2 2
-1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  2 2 2  2 2 2  2 2 2
-2 2 2  2 2 2  2 2 2  3 3 3  30 31 28  66 65 55
-118 116 76  149 143 98  165 161 109  173 167 111  173 167 111  174 170 121
-186 182 128  190 186 136  197 193 154  210 208 158  224 223 159  251 251 187
-251 251 187  239 239 170  197 193 154  137 133 100  12 12 9  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  30 31 28  71 71 57  103 101 77  134 131 96
-164 159 111  176 171 126  184 181 136  188 184 146  194 189 146  197 193 154
-197 193 154  197 193 154  194 191 148  194 189 146  190 186 136  176 171 126
-145 141 105  103 101 77  40 41 39  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 2 2  1 2 2
-1 2 2  1 2 2  1 2 2  1 2 2  1 2 2  1 2 2
-1 2 2  1 2 2  1 2 2  1 2 2  30 31 28  71 71 57
-118 116 76  160 154 106  173 167 111  178 174 128  186 182 128  190 186 136
-194 191 148  204 201 155  210 208 158  224 223 159  251 251 187  251 251 187
-251 251 187  214 212 158  184 179 149  84 83 72  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  5 5 3  43 44 41  82 81 62  103 101 77
-142 137 94  165 161 109  178 174 128  190 186 136  197 193 154  204 201 155
-210 208 158  210 208 158  210 208 158  210 208 158  210 208 158  197 193 154
-177 172 135  145 141 105  79 78 62  5 4 3  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 2 2  1 2 2  30 31 28  82 81 62
-142 137 94  165 161 109  178 174 128  190 186 136  194 191 148  204 201 155
-210 208 158  214 212 158  239 239 170  251 251 187  251 251 187  251 251 187
-251 251 187  210 208 158  168 163 120  36 38 35  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  16 17 12  53 55 47  82 81 62
-118 116 76  151 147 98  171 165 117  184 181 136  194 191 148  210 208 158
-214 212 158  224 223 159  239 239 170  239 239 170  224 223 159  214 212 158
-197 193 154  176 171 126  115 113 82  24 26 24  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  40 41 39  103 101 77
-151 147 98  176 171 126  190 186 136  197 193 154  210 208 158  214 212 158
-239 239 170  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-239 239 170  197 193 154  110 109 94  3 4 3  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  30 31 28  66 65 55
-96 95 69  125 122 87  160 154 106  178 174 128  194 189 146  204 201 155
-214 212 158  239 239 170  251 251 187  251 251 187  251 251 187  239 239 170
-210 208 158  188 184 146  149 145 103  61 61 53  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  61 61 53  131 127 93
-164 159 111  184 181 136  197 193 154  210 208 158  224 223 159  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  251 251 187
-210 208 158  168 163 120  43 44 41  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  4 3 2  36 38 35
-71 71 57  96 95 69  142 137 94  165 161 109  184 181 136  197 193 154
-210 208 158  239 239 170  251 251 187  251 251 187  251 251 187  251 251 187
-214 212 158  197 193 154  168 163 120  103 101 77  7 7 5  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-1 1 1  0 0 0  0 0 0  0 0 0  82 81 62  142 137 94
-174 170 121  194 189 146  210 208 158  224 223 159  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  251 251 187  224 223 159
-184 179 149  99 98 80  3 3 3  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 7 5
-43 44 41  82 81 62  118 116 76  142 137 94  171 165 117  190 186 136
-204 201 155  224 223 159  251 251 187  251 251 187  251 251 187  251 251 187
-214 212 158  197 193 154  174 170 121  125 122 87  30 31 28  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 1
-1 1 1  1 1 1  1 1 1  1 1 1  1 1 1  1 1 1
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  3 4 3  82 81 62  149 143 98
-176 171 126  194 191 148  210 208 158  239 239 170  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  251 251 187  239 239 170  204 201 155
-145 141 105  30 31 28  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-10 9 6  46 47 43  82 81 62  118 116 76  149 143 98  174 170 121
-194 189 146  210 208 158  224 223 159  251 251 187  251 251 187  224 223 159
-210 208 158  194 191 148  174 170 121  134 131 96  53 55 47  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  7 7 5  96 95 69  149 143 98
-176 171 126  194 191 148  210 208 158  239 239 170  251 251 187  251 251 187
-251 251 187  251 251 187  251 251 187  239 239 170  210 208 158  177 172 135
-75 75 61  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  10 9 6  46 47 43  82 81 62  118 116 76  149 143 98
-176 171 126  194 191 148  210 208 158  214 212 158  214 212 158  210 208 158
-197 193 154  184 181 136  164 159 111  131 127 93  53 55 47  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  7 7 5  96 95 69  149 143 98
-174 170 121  194 189 146  204 201 155  214 212 158  239 239 170  251 251 187
-251 251 187  251 251 187  239 239 170  210 208 158  184 179 149  110 109 94
-12 12 9  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  10 9 6  43 44 41  82 81 62  115 113 82
-144 139 99  168 163 120  188 184 146  197 193 154  197 193 154  194 189 146
-184 181 136  174 170 121  151 147 98  118 116 76  36 38 35  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  4 3 2  82 81 62  142 137 94
-171 165 117  186 182 128  194 191 148  210 208 158  214 212 158  224 223 159
-239 239 170  224 223 159  210 208 158  184 179 149  137 133 100  36 38 35
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  7 7 5  36 38 35  71 71 57
-103 101 77  131 127 93  155 149 109  168 163 120  168 163 120  168 163 120
-164 159 111  149 143 98  125 122 87  82 81 62  13 12 7  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  61 61 53  125 122 87
-160 154 106  174 170 121  184 181 136  194 189 146  204 201 155  210 208 158
-210 208 158  204 201 155  184 179 149  145 141 105  61 61 53  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  3 3 2  30 31 28
-61 61 53  82 81 62  103 101 77  121 119 87  125 122 87  125 122 87
-118 116 76  103 101 77  79 78 62  24 26 24  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  25 27 25  96 95 69
-142 137 94  160 154 106  171 165 117  178 174 128  184 181 136  184 181 136
-181 176 137  177 172 135  145 141 105  75 75 61  5 5 3  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-16 17 12  40 41 39  61 61 53  71 71 57  71 71 57  71 71 57
-66 65 55  43 44 41  12 12 9  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  1 1 1  46 47 43
-96 95 69  125 122 87  142 137 94  149 145 103  155 149 109  155 149 109
-145 141 105  121 119 87  66 65 55  7 7 5  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  1 1 1  16 17 12  24 26 24  25 27 25  19 20 18
-7 7 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 2 1
-25 27 25  61 61 53  82 81 62  96 95 69  96 95 69  82 81 62
-61 61 53  25 27 25  2 2 1  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  5 6 5  13 12 7  10 9 6  3 4 3
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6   6   6   6  10  10  10  10  10  10
+ 10  10  10   6   6   6   6   6   6   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  10  10  10  14  14  14
+ 22  22  22  26  26  26  30  30  30  34  34  34
+ 30  30  30  30  30  30  26  26  26  18  18  18
+ 14  14  14  10  10  10   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  14  14  14  26  26  26  42  42  42
+ 54  54  54  66  66  66  78  78  78  78  78  78
+ 78  78  78  74  74  74  66  66  66  54  54  54
+ 42  42  42  26  26  26  18  18  18  10  10  10
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 22  22  22  42  42  42  66  66  66  86  86  86
+ 66  66  66  38  38  38  38  38  38  22  22  22
+ 26  26  26  34  34  34  54  54  54  66  66  66
+ 86  86  86  70  70  70  46  46  46  26  26  26
+ 14  14  14   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  10  10  10  26  26  26
+ 50  50  50  82  82  82  58  58  58   6   6   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  6   6   6  54  54  54  86  86  86  66  66  66
+ 38  38  38  18  18  18   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  22  22  22  50  50  50
+ 78  78  78  34  34  34   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   6   6   6  70  70  70
+ 78  78  78  46  46  46  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  18  18  18  42  42  42  82  82  82
+ 26  26  26   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  14  14  14
+ 46  46  46  34  34  34   6   6   6   2   2   6
+ 42  42  42  78  78  78  42  42  42  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   0   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 10  10  10  30  30  30  66  66  66  58  58  58
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  26  26  26
+ 86  86  86 101 101 101  46  46  46  10  10  10
+  2   2   6  58  58  58  70  70  70  34  34  34
+ 10  10  10   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 14  14  14  42  42  42  86  86  86  10  10  10
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  30  30  30
+ 94  94  94  94  94  94  58  58  58  26  26  26
+  2   2   6   6   6   6  78  78  78  54  54  54
+ 22  22  22   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 22  22  22  62  62  62  62  62  62   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  26  26  26
+ 54  54  54  38  38  38  18  18  18  10  10  10
+  2   2   6   2   2   6  34  34  34  82  82  82
+ 38  38  38  14  14  14   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 30  30  30  78  78  78  30  30  30   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  10  10  10
+ 10  10  10   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  78  78  78
+ 50  50  50  18  18  18   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 38  38  38  86  86  86  14  14  14   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  54  54  54
+ 66  66  66  26  26  26   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 42  42  42  82  82  82   2   2   6   2   2   6
+  2   2   6   6   6   6  10  10  10   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   6   6   6
+ 14  14  14  10  10  10   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  18  18  18
+ 82  82  82  34  34  34  10  10  10   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 46  46  46  86  86  86   2   2   6   2   2   6
+  6   6   6   6   6   6  22  22  22  34  34  34
+  6   6   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6  18  18  18  34  34  34
+ 10  10  10  50  50  50  22  22  22   2   2   6
+  2   2   6   2   2   6   2   2   6  10  10  10
+ 86  86  86  42  42  42  14  14  14   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   1   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 46  46  46  86  86  86   2   2   6   2   2   6
+ 38  38  38 116 116 116  94  94  94  22  22  22
+ 22  22  22   2   2   6   2   2   6   2   2   6
+ 14  14  14  86  86  86 138 138 138 162 162 162
+154 154 154  38  38  38  26  26  26   6   6   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 86  86  86  46  46  46  14  14  14   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 46  46  46  86  86  86   2   2   6  14  14  14
+134 134 134 198 198 198 195 195 195 116 116 116
+ 10  10  10   2   2   6   2   2   6   6   6   6
+101  98  89 187 187 187 210 210 210 218 218 218
+214 214 214 134 134 134  14  14  14   6   6   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 86  86  86  50  50  50  18  18  18   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   1   0   0   0
+  0   0   1   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 46  46  46  86  86  86   2   2   6  54  54  54
+218 218 218 195 195 195 226 226 226 246 246 246
+ 58  58  58   2   2   6   2   2   6  30  30  30
+210 210 210 253 253 253 174 174 174 123 123 123
+221 221 221 234 234 234  74  74  74   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 70  70  70  58  58  58  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 46  46  46  82  82  82   2   2   6 106 106 106
+170 170 170  26  26  26  86  86  86 226 226 226
+123 123 123  10  10  10  14  14  14  46  46  46
+231 231 231 190 190 190   6   6   6  70  70  70
+ 90  90  90 238 238 238 158 158 158   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 70  70  70  58  58  58  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   1   0   0   0
+  0   0   1   0   0   1   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 42  42  42  86  86  86   6   6   6 116 116 116
+106 106 106   6   6   6  70  70  70 149 149 149
+128 128 128  18  18  18  38  38  38  54  54  54
+221 221 221 106 106 106   2   2   6  14  14  14
+ 46  46  46 190 190 190 198 198 198   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 74  74  74  62  62  62  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   1   0   0   0
+  0   0   1   0   0   0   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 42  42  42  94  94  94  14  14  14 101 101 101
+128 128 128   2   2   6  18  18  18 116 116 116
+118  98  46 121  92   8 121  92   8  98  78  10
+162 162 162 106 106 106   2   2   6   2   2   6
+  2   2   6 195 195 195 195 195 195   6   6   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 74  74  74  62  62  62  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   1   0   0   1
+  0   0   1   0   0   0   0   0   1   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 38  38  38  90  90  90  14  14  14  58  58  58
+210 210 210  26  26  26  54  38   6 154 114  10
+226 170  11 236 186  11 225 175  15 184 144  12
+215 174  15 175 146  61  37  26   9   2   2   6
+ 70  70  70 246 246 246 138 138 138   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 70  70  70  66  66  66  26  26  26   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 38  38  38  86  86  86  14  14  14  10  10  10
+195 195 195 188 164 115 192 133   9 225 175  15
+239 182  13 234 190  10 232 195  16 232 200  30
+245 207  45 241 208  19 232 195  16 184 144  12
+218 194 134 211 206 186  42  42  42   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 50  50  50  74  74  74  30  30  30   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 34  34  34  86  86  86  14  14  14   2   2   6
+121  87  25 192 133   9 219 162  10 239 182  13
+236 186  11 232 195  16 241 208  19 244 214  54
+246 218  60 246 218  38 246 215  20 241 208  19
+241 208  19 226 184  13 121  87  25   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 50  50  50  82  82  82  34  34  34  10  10  10
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 34  34  34  82  82  82  30  30  30  61  42   6
+180 123   7 206 145  10 230 174  11 239 182  13
+234 190  10 238 202  15 241 208  19 246 218  74
+246 218  38 246 215  20 246 215  20 246 215  20
+226 184  13 215 174  15 184 144  12   6   6   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 26  26  26  94  94  94  42  42  42  14  14  14
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  78  78  78  50  50  50 104  69   6
+192 133   9 216 158  10 236 178  12 236 186  11
+232 195  16 241 208  19 244 214  54 245 215  43
+246 215  20 246 215  20 241 208  19 198 155  10
+200 144  11 216 158  10 156 118  10   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  6   6   6  90  90  90  54  54  54  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  78  78  78  46  46  46  22  22  22
+137  92   6 210 162  10 239 182  13 238 190  10
+238 202  15 241 208  19 246 215  20 246 215  20
+241 208  19 203 166  17 185 133  11 210 150  10
+216 158  10 210 150  10 102  78  10   2   2   6
+  6   6   6  54  54  54  14  14  14   2   2   6
+  2   2   6  62  62  62  74  74  74  30  30  30
+ 10  10  10   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 34  34  34  78  78  78  50  50  50   6   6   6
+ 94  70  30 139 102  15 190 146  13 226 184  13
+232 200  30 232 195  16 215 174  15 190 146  13
+168 122  10 192 133   9 210 150  10 213 154  11
+202 150  34 182 157 106 101  98  89   2   2   6
+  2   2   6  78  78  78 116 116 116  58  58  58
+  2   2   6  22  22  22  90  90  90  46  46  46
+ 18  18  18   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 38  38  38  86  86  86  50  50  50   6   6   6
+128 128 128 174 154 114 156 107  11 168 122  10
+198 155  10 184 144  12 197 138  11 200 144  11
+206 145  10 206 145  10 197 138  11 188 164 115
+195 195 195 198 198 198 174 174 174  14  14  14
+  2   2   6  22  22  22 116 116 116 116 116 116
+ 22  22  22   2   2   6  74  74  74  70  70  70
+ 30  30  30  10  10  10   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  18  18  18
+ 50  50  50 101 101 101  26  26  26  10  10  10
+138 138 138 190 190 190 174 154 114 156 107  11
+197 138  11 200 144  11 197 138  11 192 133   9
+180 123   7 190 142  34 190 178 144 187 187 187
+202 202 202 221 221 221 214 214 214  66  66  66
+  2   2   6   2   2   6  50  50  50  62  62  62
+  6   6   6   2   2   6  10  10  10  90  90  90
+ 50  50  50  18  18  18   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  10  10  10  34  34  34
+ 74  74  74  74  74  74   2   2   6   6   6   6
+144 144 144 198 198 198 190 190 190 178 166 146
+154 121  60 156 107  11 156 107  11 168 124  44
+174 154 114 187 187 187 190 190 190 210 210 210
+246 246 246 253 253 253 253 253 253 182 182 182
+  6   6   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  62  62  62
+ 74  74  74  34  34  34  14  14  14   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  10  10  10  22  22  22  54  54  54
+ 94  94  94  18  18  18   2   2   6  46  46  46
+234 234 234 221 221 221 190 190 190 190 190 190
+190 190 190 187 187 187 187 187 187 190 190 190
+190 190 190 195 195 195 214 214 214 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+ 82  82  82   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  14  14  14
+ 86  86  86  54  54  54  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  18  18  18  46  46  46  90  90  90
+ 46  46  46  18  18  18   6   6   6 182 182 182
+253 253 253 246 246 246 206 206 206 190 190 190
+190 190 190 190 190 190 190 190 190 190 190 190
+206 206 206 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+202 202 202  14  14  14   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 42  42  42  86  86  86  42  42  42  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 14  14  14  38  38  38  74  74  74  66  66  66
+  2   2   6   6   6   6  90  90  90 250 250 250
+253 253 253 253 253 253 238 238 238 198 198 198
+190 190 190 190 190 190 195 195 195 221 221 221
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253  82  82  82   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  78  78  78  70  70  70  34  34  34
+ 14  14  14   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 34  34  34  66  66  66  78  78  78   6   6   6
+  2   2   6  18  18  18 218 218 218 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+226 226 226 231 231 231 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 178 178 178   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  18  18  18  90  90  90  62  62  62
+ 30  30  30  10  10  10   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  10  10  10  26  26  26
+ 58  58  58  90  90  90  18  18  18   2   2   6
+  2   2   6 110 110 110 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231  18  18  18   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6  18  18  18  94  94  94
+ 54  54  54  26  26  26  10  10  10   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  22  22  22  50  50  50
+ 90  90  90  26  26  26   2   2   6   2   2   6
+ 14  14  14 195 195 195 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 242 242 242  54  54  54   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6  38  38  38
+ 86  86  86  50  50  50  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  14  14  14  38  38  38  82  82  82
+ 34  34  34   2   2   6   2   2   6   2   2   6
+ 42  42  42 195 195 195 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 242 242 242 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 246 246 246 238 238 238
+226 226 226 231 231 231 101 101 101   6   6   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 38  38  38  82  82  82  42  42  42  14  14  14
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 10  10  10  26  26  26  62  62  62  66  66  66
+  2   2   6   2   2   6   2   2   6   6   6   6
+ 70  70  70 170 170 170 206 206 206 234 234 234
+246 246 246 250 250 250 250 250 250 238 238 238
+226 226 226 231 231 231 238 238 238 250 250 250
+250 250 250 250 250 250 246 246 246 231 231 231
+214 214 214 206 206 206 202 202 202 202 202 202
+198 198 198 202 202 202 182 182 182  18  18  18
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  62  62  62  66  66  66  30  30  30
+ 10  10  10   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 14  14  14  42  42  42  82  82  82  18  18  18
+  2   2   6   2   2   6   2   2   6  10  10  10
+ 94  94  94 182 182 182 218 218 218 242 242 242
+250 250 250 253 253 253 253 253 253 250 250 250
+234 234 234 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+238 238 238 226 226 226 210 210 210 202 202 202
+195 195 195 195 195 195 210 210 210 158 158 158
+  6   6   6  14  14  14  50  50  50  14  14  14
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   6   6   6  86  86  86  46  46  46
+ 18  18  18   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 22  22  22  54  54  54  70  70  70   2   2   6
+  2   2   6  10  10  10   2   2   6  22  22  22
+166 166 166 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+231 231 231 206 206 206 198 198 198 226 226 226
+ 94  94  94   2   2   6   6   6   6  38  38  38
+ 30  30  30   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6  62  62  62  66  66  66
+ 26  26  26  10  10  10   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  74  74  74  50  50  50   2   2   6
+ 26  26  26  26  26  26   2   2   6 106 106 106
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 218 218 218 202 202 202
+210 210 210  14  14  14   2   2   6   2   2   6
+ 30  30  30  22  22  22   2   2   6   2   2   6
+  2   2   6   2   2   6  18  18  18  86  86  86
+ 42  42  42  14  14  14   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 42  42  42  90  90  90  22  22  22   2   2   6
+ 42  42  42   2   2   6  18  18  18 218 218 218
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 221 221 221
+218 218 218 101 101 101   2   2   6  14  14  14
+ 18  18  18  38  38  38  10  10  10   2   2   6
+  2   2   6   2   2   6   2   2   6  78  78  78
+ 58  58  58  22  22  22   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  18  18  18
+ 54  54  54  82  82  82   2   2   6  26  26  26
+ 22  22  22   2   2   6 123 123 123 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+238 238 238 198 198 198   6   6   6  38  38  38
+ 58  58  58  26  26  26  38  38  38   2   2   6
+  2   2   6   2   2   6   2   2   6  46  46  46
+ 78  78  78  30  30  30  10  10  10   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  10  10  10  30  30  30
+ 74  74  74  58  58  58   2   2   6  42  42  42
+  2   2   6  22  22  22 231 231 231 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246  46  46  46  38  38  38
+ 42  42  42  14  14  14  38  38  38  14  14  14
+  2   2   6   2   2   6   2   2   6   6   6   6
+ 86  86  86  46  46  46  14  14  14   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  14  14  14  42  42  42
+ 90  90  90  18  18  18  18  18  18  26  26  26
+  2   2   6 116 116 116 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253  94  94  94   6   6   6
+  2   2   6   2   2   6  10  10  10  34  34  34
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 74  74  74  58  58  58  22  22  22   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  10  10  10  26  26  26  66  66  66
+ 82  82  82   2   2   6  38  38  38   6   6   6
+ 14  14  14 210 210 210 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 246 246 246 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 144 144 144   2   2   6
+  2   2   6   2   2   6   2   2   6  46  46  46
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 42  42  42  74  74  74  30  30  30  10  10  10
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  14  14  14  42  42  42  90  90  90
+ 26  26  26   6   6   6  42  42  42   2   2   6
+ 74  74  74 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 242 242 242 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 182 182 182   2   2   6
+  2   2   6   2   2   6   2   2   6  46  46  46
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 10  10  10  86  86  86  38  38  38  10  10  10
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 10  10  10  26  26  26  66  66  66  82  82  82
+  2   2   6  22  22  22  18  18  18   2   2   6
+149 149 149 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206   2   2   6
+  2   2   6   2   2   6   2   2   6  38  38  38
+  2   2   6   2   2   6   2   2   6   2   2   6
+  6   6   6  86  86  86  46  46  46  14  14  14
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 18  18  18  46  46  46  86  86  86  18  18  18
+  2   2   6  34  34  34  10  10  10   6   6   6
+210 210 210 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 221 221 221   6   6   6
+  2   2   6   2   2   6   6   6   6  30  30  30
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  82  82  82  54  54  54  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 26  26  26  66  66  66  62  62  62   2   2   6
+  2   2   6  38  38  38  10  10  10  26  26  26
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231   6   6   6
+  2   2   6   2   2   6  10  10  10  30  30  30
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  66  66  66  58  58  58  22  22  22
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 38  38  38  78  78  78   6   6   6   2   2   6
+  2   2   6  46  46  46  14  14  14  42  42  42
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234  10  10  10
+  2   2   6   2   2   6  22  22  22  14  14  14
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  66  66  66  62  62  62  22  22  22
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  18  18  18
+ 50  50  50  74  74  74   2   2   6   2   2   6
+ 14  14  14  70  70  70  34  34  34  62  62  62
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234  14  14  14
+  2   2   6   2   2   6  30  30  30   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  66  66  66  62  62  62  22  22  22
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  18  18  18
+ 54  54  54  62  62  62   2   2   6   2   2   6
+  2   2   6  30  30  30  46  46  46  70  70  70
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 226 226 226  10  10  10
+  2   2   6   6   6   6  30  30  30   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6  66  66  66  58  58  58  22  22  22
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  22  22  22
+ 58  58  58  62  62  62   2   2   6   2   2   6
+  2   2   6   2   2   6  30  30  30  78  78  78
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206   2   2   6
+ 22  22  22  34  34  34  18  14   6  22  22  22
+ 26  26  26  18  18  18   6   6   6   2   2   6
+  2   2   6  82  82  82  54  54  54  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  26  26  26
+ 62  62  62 106 106 106  74  54  14 185 133  11
+210 162  10 121  92   8   6   6   6  62  62  62
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 158 158 158  18  18  18
+ 14  14  14   2   2   6   2   2   6   2   2   6
+  6   6   6  18  18  18  66  66  66  38  38  38
+  6   6   6  94  94  94  50  50  50  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 10  10  10  10  10  10  18  18  18  38  38  38
+ 78  78  78 142 134 106 216 158  10 242 186  14
+246 190  14 246 190  14 156 118  10  10  10  10
+ 90  90  90 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 230 190
+238 204  91 238 204  91 181 142  44  37  26   9
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6  38  38  38  46  46  46
+ 26  26  26 106 106 106  54  54  54  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  14  14  14  22  22  22
+ 30  30  30  38  38  38  50  50  50  70  70  70
+106 106 106 190 142  34 226 170  11 242 186  14
+246 190  14 246 190  14 246 190  14 154 114  10
+  6   6   6  74  74  74 226 226 226 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 228 184  62
+241 196  14 241 208  19 232 195  16  38  30  10
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   6   6   6  30  30  30  26  26  26
+203 166  17 154 142  90  66  66  66  26  26  26
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  18  18  18  38  38  38  58  58  58
+ 78  78  78  86  86  86 101 101 101 123 123 123
+175 146  61 210 150  10 234 174  13 246 186  14
+246 190  14 246 190  14 246 190  14 238 190  10
+102  78  10   2   2   6  46  46  46 198 198 198
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 224 178  62
+242 186  14 241 196  14 210 166  10  22  18   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   6   6   6 121  92   8
+238 202  15 232 195  16  82  82  82  34  34  34
+ 10  10  10   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 14  14  14  38  38  38  70  70  70 154 122  46
+190 142  34 200 144  11 197 138  11 197 138  11
+213 154  11 226 170  11 242 186  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+225 175  15  46  32   6   2   2   6  22  22  22
+158 158 158 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 242 242 242 224 178  62
+239 182  13 236 186  11 213 154  11  46  32   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6  61  42   6 225 175  15
+238 190  10 236 186  11 112 100  78  42  42  42
+ 14  14  14   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 22  22  22  54  54  54 154 122  46 213 154  11
+226 170  11 230 174  11 226 170  11 226 170  11
+236 178  12 242 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+241 196  14 184 144  12  10  10  10   2   2   6
+  6   6   6 116 116 116 242 242 242 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 198 198 198 214 170  54
+236 178  12 236 178  12 210 150  10 137  92   6
+ 18  14   6   2   2   6   2   2   6   2   2   6
+  6   6   6  70  47   6 200 144  11 236 178  12
+239 182  13 239 182  13 124 112  88  58  58  58
+ 22  22  22   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  70  70  70 180 133  36 226 170  11
+239 182  13 242 186  14 242 186  14 246 186  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 232 195  16  98  70   6   2   2   6
+  2   2   6   2   2   6  66  66  66 221 221 221
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 206 206 206 198 198 198 214 166  58
+230 174  11 230 174  11 216 158  10 192 133   9
+163 110   8 116  81   8 102  78  10 116  81   8
+167 114   7 197 138  11 226 170  11 239 182  13
+242 186  14 242 186  14 162 146  94  78  78  78
+ 34  34  34  14  14  14   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 30  30  30  78  78  78 190 142  34 226 170  11
+239 182  13 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 241 196  14 203 166  17  22  18   6
+  2   2   6   2   2   6   2   2   6  38  38  38
+218 218 218 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 206 206 206 198 198 198 202 162  69
+226 170  11 236 178  12 224 166  10 210 150  10
+200 144  11 197 138  11 192 133   9 197 138  11
+210 150  10 226 170  11 242 186  14 246 190  14
+246 190  14 246 186  14 225 175  15 124 112  88
+ 62  62  62  30  30  30  14  14  14   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  78  78  78 174 135  50 224 166  10
+239 182  13 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 241 196  14 139 102  15
+  2   2   6   2   2   6   2   2   6   2   2   6
+ 78  78  78 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 214 214 214 198 198 198 190 150  46
+219 162  10 236 178  12 234 174  13 224 166  10
+216 158  10 213 154  11 213 154  11 216 158  10
+226 170  11 239 182  13 246 190  14 246 190  14
+246 190  14 246 190  14 242 186  14 206 162  42
+101 101 101  58  58  58  30  30  30  14  14  14
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  74  74  74 174 135  50 216 158  10
+236 178  12 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 241 196  14 226 184  13
+ 61  42   6   2   2   6   2   2   6   2   2   6
+ 22  22  22 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 226 226 226 187 187 187 180 133  36
+216 158  10 236 178  12 239 182  13 236 178  12
+230 174  11 226 170  11 226 170  11 230 174  11
+236 178  12 242 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 186  14 239 182  13
+206 162  42 106 106 106  66  66  66  34  34  34
+ 14  14  14   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 26  26  26  70  70  70 163 133  67 213 154  11
+236 178  12 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 241 196  14
+190 146  13  18  14   6   2   2   6   2   2   6
+ 46  46  46 246 246 246 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 221 221 221  86  86  86 156 107  11
+216 158  10 236 178  12 242 186  14 246 186  14
+242 186  14 239 182  13 239 182  13 242 186  14
+242 186  14 246 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+242 186  14 225 175  15 142 122  72  66  66  66
+ 30  30  30  10  10  10   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 26  26  26  70  70  70 163 133  67 210 150  10
+236 178  12 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+232 195  16 121  92   8  34  34  34 106 106 106
+221 221 221 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+242 242 242  82  82  82  18  14   6 163 110   8
+216 158  10 236 178  12 242 186  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 242 186  14 163 133  67
+ 46  46  46  18  18  18   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  10  10  10
+ 30  30  30  78  78  78 163 133  67 210 150  10
+236 178  12 246 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+241 196  14 215 174  15 190 178 144 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 218 218 218
+ 58  58  58   2   2   6  22  18   6 167 114   7
+216 158  10 236 178  12 246 186  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 186  14 242 186  14 190 150  46
+ 54  54  54  22  22  22   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 38  38  38  86  86  86 180 133  36 213 154  11
+236 178  12 246 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 232 195  16 190 146  13 214 214 214
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 170 170 170  26  26  26
+  2   2   6   2   2   6  37  26   9 163 110   8
+219 162  10 239 182  13 246 186  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 186  14 236 178  12 224 166  10 142 122  72
+ 46  46  46  18  18  18   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  18  18  18
+ 50  50  50 109 106  95 192 133   9 224 166  10
+242 186  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+242 186  14 226 184  13 210 162  10 142 110  46
+226 226 226 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+198 198 198  66  66  66   2   2   6   2   2   6
+  2   2   6   2   2   6  50  34   6 156 107  11
+219 162  10 239 182  13 246 186  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 242 186  14
+234 174  13 213 154  11 154 122  46  66  66  66
+ 30  30  30  10  10  10   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  22  22  22
+ 58  58  58 154 121  60 206 145  10 234 174  13
+242 186  14 246 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 186  14 236 178  12 210 162  10 163 110   8
+ 61  42   6 138 138 138 218 218 218 250 250 250
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 210 210 210 144 144 144  66  66  66
+  6   6   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6  61  42   6 163 110   8
+216 158  10 236 178  12 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 239 182  13 230 174  11 216 158  10
+190 142  34 124 112  88  70  70  70  38  38  38
+ 18  18  18   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  22  22  22
+ 62  62  62 168 124  44 206 145  10 224 166  10
+236 178  12 239 182  13 242 186  14 242 186  14
+246 186  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 236 178  12 216 158  10 175 118   6
+ 80  54   7   2   2   6   6   6   6  30  30  30
+ 54  54  54  62  62  62  50  50  50  38  38  38
+ 14  14  14   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   6   6   6  80  54   7 167 114   7
+213 154  11 236 178  12 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 190  14 242 186  14 239 182  13 239 182  13
+230 174  11 210 150  10 174 135  50 124 112  88
+ 82  82  82  54  54  54  34  34  34  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  18  18  18
+ 50  50  50 158 118  36 192 133   9 200 144  11
+216 158  10 219 162  10 224 166  10 226 170  11
+230 174  11 236 178  12 239 182  13 239 182  13
+242 186  14 246 186  14 246 190  14 246 190  14
+246 190  14 246 190  14 246 190  14 246 190  14
+246 186  14 230 174  11 210 150  10 163 110   8
+104  69   6  10  10  10   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   6   6   6  91  60   6 167 114   7
+206 145  10 230 174  11 242 186  14 246 190  14
+246 190  14 246 190  14 246 186  14 242 186  14
+239 182  13 230 174  11 224 166  10 213 154  11
+180 133  36 124 112  88  86  86  86  58  58  58
+ 38  38  38  22  22  22  10  10  10   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  14  14  14
+ 34  34  34  70  70  70 138 110  50 158 118  36
+167 114   7 180 123   7 192 133   9 197 138  11
+200 144  11 206 145  10 213 154  11 219 162  10
+224 166  10 230 174  11 239 182  13 242 186  14
+246 186  14 246 186  14 246 186  14 246 186  14
+239 182  13 216 158  10 185 133  11 152  99   6
+104  69   6  18  14   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   2   2   6   2   2   6   2   2   6
+  2   2   6   6   6   6  80  54   7 152  99   6
+192 133   9 219 162  10 236 178  12 239 182  13
+246 186  14 242 186  14 239 182  13 236 178  12
+224 166  10 206 145  10 192 133   9 154 121  60
+ 94  94  94  62  62  62  42  42  42  22  22  22
+ 14  14  14   6   6   6   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 18  18  18  34  34  34  58  58  58  78  78  78
+101  98  89 124 112  88 142 110  46 156 107  11
+163 110   8 167 114   7 175 118   6 180 123   7
+185 133  11 197 138  11 210 150  10 219 162  10
+226 170  11 236 178  12 236 178  12 234 174  13
+219 162  10 197 138  11 163 110   8 130  83   6
+ 91  60   6  10  10  10   2   2   6   2   2   6
+ 18  18  18  38  38  38  38  38  38  38  38  38
+ 38  38  38  38  38  38  38  38  38  38  38  38
+ 38  38  38  38  38  38  26  26  26   2   2   6
+  2   2   6   6   6   6  70  47   6 137  92   6
+175 118   6 200 144  11 219 162  10 230 174  11
+234 174  13 230 174  11 219 162  10 210 150  10
+192 133   9 163 110   8 124 112  88  82  82  82
+ 50  50  50  30  30  30  14  14  14   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  14  14  14  22  22  22  34  34  34
+ 42  42  42  58  58  58  74  74  74  86  86  86
+101  98  89 122 102  70 130  98  46 121  87  25
+137  92   6 152  99   6 163 110   8 180 123   7
+185 133  11 197 138  11 206 145  10 200 144  11
+180 123   7 156 107  11 130  83   6 104  69   6
+ 50  34   6  54  54  54 110 110 110 101  98  89
+ 86  86  86  82  82  82  78  78  78  78  78  78
+ 78  78  78  78  78  78  78  78  78  78  78  78
+ 78  78  78  82  82  82  86  86  86  94  94  94
+106 106 106 101 101 101  86  66  34 124  80   6
+156 107  11 180 123   7 192 133   9 200 144  11
+206 145  10 200 144  11 192 133   9 175 118   6
+139 102  15 109 106  95  70  70  70  42  42  42
+ 22  22  22  10  10  10   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   6   6   6  10  10  10
+ 14  14  14  22  22  22  30  30  30  38  38  38
+ 50  50  50  62  62  62  74  74  74  90  90  90
+101  98  89 112 100  78 121  87  25 124  80   6
+137  92   6 152  99   6 152  99   6 152  99   6
+138  86   6 124  80   6  98  70   6  86  66  30
+101  98  89  82  82  82  58  58  58  46  46  46
+ 38  38  38  34  34  34  34  34  34  34  34  34
+ 34  34  34  34  34  34  34  34  34  34  34  34
+ 34  34  34  34  34  34  38  38  38  42  42  42
+ 54  54  54  82  82  82  94  86  76  91  60   6
+134  86   6 156 107  11 167 114   7 175 118   6
+175 118   6 167 114   7 152  99   6 121  87  25
+101  98  89  62  62  62  34  34  34  18  18  18
+  6   6   6   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6   6   6   6  10  10  10
+ 18  18  18  22  22  22  30  30  30  42  42  42
+ 50  50  50  66  66  66  86  86  86 101  98  89
+106  86  58  98  70   6 104  69   6 104  69   6
+104  69   6  91  60   6  82  62  34  90  90  90
+ 62  62  62  38  38  38  22  22  22  14  14  14
+ 10  10  10  10  10  10  10  10  10  10  10  10
+ 10  10  10  10  10  10   6   6   6  10  10  10
+ 10  10  10  10  10  10  10  10  10  14  14  14
+ 22  22  22  42  42  42  70  70  70  89  81  66
+ 80  54   7 104  69   6 124  80   6 137  92   6
+134  86   6 116  81   8 100  82  52  86  86  86
+ 58  58  58  30  30  30  14  14  14   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  10  10  10  14  14  14
+ 18  18  18  26  26  26  38  38  38  54  54  54
+ 70  70  70  86  86  86  94  86  76  89  81  66
+ 89  81  66  86  86  86  74  74  74  50  50  50
+ 30  30  30  14  14  14   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6  18  18  18  34  34  34  58  58  58
+ 82  82  82  89  81  66  89  81  66  89  81  66
+ 94  86  66  94  86  76  74  74  74  50  50  50
+ 26  26  26  14  14  14   6   6   6   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  6   6   6   6   6   6  14  14  14  18  18  18
+ 30  30  30  38  38  38  46  46  46  54  54  54
+ 50  50  50  42  42  42  30  30  30  18  18  18
+ 10  10  10   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   6   6   6  14  14  14  26  26  26
+ 38  38  38  50  50  50  58  58  58  58  58  58
+ 54  54  54  42  42  42  30  30  30  18  18  18
+ 10  10  10   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+  6   6   6  10  10  10  14  14  14  18  18  18
+ 18  18  18  14  14  14  10  10  10   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   6   6   6
+ 14  14  14  18  18  18  22  22  22  22  22  22
+ 18  18  18  14  14  14  10  10  10   6   6   6
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
diff --git a/drivers/video/logo/logo_linux_vga16.ppm b/drivers/video/logo/logo_linux_vga16.ppm
index 12ac3a5454c..1850c15e6fe 100644
--- a/drivers/video/logo/logo_linux_vga16.ppm
+++ b/drivers/video/logo/logo_linux_vga16.ppm
@@ -1,2739 +1,1604 @@
 P3
-142 114
+# Standard 16-color Linux logo
+80 80
 255
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  170 170 170  170 85 0  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
-255 255 85  170 170 170  170 170 170  170 85 0  85 255 85  170 85 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  170 85 0
-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  170 85 0  170 170 170
-170 170 170  170 85 0  170 170 170  170 170 170  170 85 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 255 85
-255 85 85  85 255 85  170 170 170  170 85 0  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  85 85 85
-170 170 170  170 85 0  170 170 170  85 85 85  170 85 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  85 85 85  170 85 0
-85 85 85  85 85 85  170 85 0  85 255 85  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  170 85 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 170 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 85 0  85 255 85  170 85 0  170 85 0  170 85 0  85 255 85
-170 85 0  170 85 0  0 170 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 170 0  170 85 0
-255 255 85  170 85 0  255 255 85  255 255 85  255 255 85  170 85 0
-255 255 85  85 255 85  170 85 0  170 85 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
-85 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
-255 255 85  170 85 0  255 255 85  85 255 85  170 85 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  170 85 0
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
-255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  85 255 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
-255 255 85  255 255 85  170 85 0  255 255 85  85 255 85  255 255 85
-255 255 85  170 85 0  255 255 85  170 85 0  255 255 85  170 85 0
-170 85 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  170 85 0  255 255 85  85 255 85  255 255 85
-170 170 170  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  255 255 85
-85 255 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  170 85 0  255 255 85  255 255 85  255 255 85
-255 255 255  255 255 85  255 255 85  170 85 0  255 255 85  170 85 0
-255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  255 255 85
-170 85 0  170 85 0  0 170 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  170 85 0  85 255 85  255 255 85  170 170 170  255 255 255
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  170 85 0  255 255 85  85 255 85  255 255 85
-255 255 85  85 255 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  255 255 85  255 255 85  255 255 85  255 255 255  255 255 85
-255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  85 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
-255 255 85  170 85 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-170 85 0  170 85 0  255 255 85  255 255 85  255 255 255  170 170 170
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-170 85 0  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
-255 255 85  85 255 85  170 85 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-255 255 85  85 255 85  255 255 85  170 170 170  255 255 255  255 255 85
-255 255 85  255 255 85  170 85 0  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  85 255 85  170 85 0
-255 255 85  170 85 0  170 85 0  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
-85 255 85  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 170 0
-170 85 0  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  85 255 85  255 255 85  170 85 0  170 85 0
-170 85 0  85 255 85  255 255 85  85 85 85  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  85 255 85  170 170 170  170 170 170
-85 85 85  170 170 170  170 170 170  170 85 0  170 170 170  170 170 170
-85 255 85  170 170 170  170 85 0  170 170 170  85 255 85  255 85 85
-85 255 85  170 170 170  255 255 85  85 85 85  255 255 85  170 170 170
-85 255 85  170 170 170  255 255 85  170 170 170  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 255  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
-255 255 85  255 255 85  255 255 85  170 85 0  0 170 0  85 85 85
-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  85 255 85
-255 85 85  85 255 85  85 85 85  255 85 85  85 85 85  170 170 170
-170 85 0  170 170 170  85 85 85  85 255 85  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-170 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
-170 85 0  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  170 85 0  255 255 85  85 85 85  85 85 85
-255 255 85  170 170 170  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  85 85 85  170 170 170  170 85 0  170 170 170
-170 170 170  255 255 85  170 170 170  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  170 85 0  170 85 0  0 170 0
-0 0 0  170 85 0  170 85 0  0 170 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  85 85 85  170 170 170  85 85 85
-170 170 170  85 85 85  85 85 85  170 170 170  170 85 0  85 85 85
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  255 255 85  170 85 0
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  170 85 0
-255 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
-170 85 0  255 255 85  85 255 85  255 255 85  255 255 85  170 85 0
-170 85 0  255 255 85  170 85 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  255 255 85  255 255 85
-255 255 85  255 255 85  170 85 0  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  170 85 0  255 255 85  255 255 85
-85 255 85  170 85 0  0 170 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 170 0  170 85 0  255 255 85
-85 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-170 85 0  255 255 85  85 255 85  255 255 85  255 255 85  170 85 0
-85 255 85  170 85 0  170 85 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  170 85 0  255 255 85  85 255 85  255 255 85  170 85 0
-255 255 85  255 255 85  170 85 0  255 255 85  170 85 0  85 255 85
-170 85 0  170 85 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  170 85 0
-255 255 85  170 85 0  255 255 85  170 85 0  255 255 85  85 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  170 85 0  255 255 85  85 255 85  170 85 0  170 85 0
-0 170 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  170 85 0  255 255 85  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  255 255 85  170 85 0  255 255 85  170 85 0  85 255 85
-255 255 85  85 255 85  170 85 0  170 85 0  85 255 85  170 85 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  85 255 85
-255 255 85  255 255 85  85 255 85  255 255 85  255 255 85  255 255 85
-255 255 85  170 85 0  255 255 85  85 255 85  255 255 85  255 255 85
-170 85 0  170 85 0  85 255 85  170 85 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  85 85 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  255 255 85  255 255 85
-170 85 0  255 255 85  255 255 85  170 85 0  255 255 85  170 85 0
-255 255 85  85 255 85  170 85 0  255 255 85  170 85 0  85 255 85
-170 85 0  170 85 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 85 0  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  255 255 85  85 255 85
-170 85 0  255 255 85  170 85 0  85 255 85  170 85 0  170 85 0
-0 170 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  170 170 170  170 170 170  255 255 255  170 170 170
-170 170 170  170 170 170  85 85 85  85 85 85  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 255 85  255 255 85
-170 85 0  255 255 85  255 255 85  170 85 0  85 255 85  170 85 0
-255 255 85  170 85 0  0 170 0  170 85 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  170 170 170  170 170 170  170 170 170  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  255 255 85
-255 255 85  255 255 85  255 255 85  255 255 85  170 85 0  170 85 0
-0 170 0  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-255 255 85  255 255 85  170 85 0  0 170 0  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  85 85 85
-170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  170 85 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-170 170 170  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
-255 255 255  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
-170 170 170  170 170 170  170 170 170  85 85 85  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  170 170 170
-255 255 255  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
-255 255 255  255 255 255  170 170 170  255 255 255  170 170 170  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  170 170 170  170 170 170
-255 255 255  170 170 170  255 255 255  255 255 255  255 255 255  255 255 255
-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
-255 255 255  255 255 255  170 170 170  255 255 255  255 255 255  255 255 255
-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  170 170 170
-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
-255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
-255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  85 85 85  170 170 170
-170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-170 170 170  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  170 170 170  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  170 170 170  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  255 255 255  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  170 170 170
-170 170 170  255 255 255  170 170 170  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
-255 255 255  255 255 255  170 170 170  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  170 170 170  170 170 170  255 255 255
-255 255 255  170 170 170  170 170 170  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 170 170  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  255 255 255  255 255 255  255 255 255
-170 170 170  170 170 170  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 170 170  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
-170 170 170  170 170 170  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
-170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
-170 170 170  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  170 170 170  170 170 170  170 170 170
-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  170 170 170  255 255 255  255 255 255  255 255 255
-255 255 255  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  170 170 170  255 255 255  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
-255 255 255  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  170 170 170  255 255 255  170 170 170  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-255 255 255  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  255 255 255  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  255 255 255  255 255 255  255 255 255  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  170 170 170
-255 255 255  170 170 170  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  170 170 170
-170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
-170 170 170  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-170 170 170  255 255 255  255 255 255  170 170 170  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  255 255 255
-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  85 85 85
-170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  170 170 170  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-170 170 170  255 255 255  255 255 255  255 255 255  85 85 85  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  255 255 255
-255 255 255  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  255 255 255  255 255 255  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  255 255 255
-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  255 255 255  255 255 255  255 255 255  255 255 255  0 0 0
-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
-85 85 85  0 0 0  0 0 0  85 85 85  170 170 170  255 255 255
-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-170 170 170  255 255 255  170 170 170  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  170 170 170  85 85 85  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
-0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  255 255 255
-170 170 170  170 170 170  0 0 0  0 0 0  0 0 0  85 85 85
-170 170 170  255 255 255  255 255 255  0 0 0  0 0 0  85 85 85
-255 255 255  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 255
-255 255 255  255 255 255  170 170 170  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  255 255 255  170 170 170  170 170 170  170 170 170
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  170 170 170  255 255 255  170 170 170  170 170 170  85 85 85
-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  170 170 170
-170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  170 170 170
-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  170 170 170
-255 255 255  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  170 170 170  255 255 85  85 85 85
-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
-85 85 85  170 170 170  170 170 170  170 170 170  170 85 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  170 170 170  170 85 0
-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-170 85 0  170 170 170  85 85 85  0 0 0  85 85 85  85 85 85
-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  255 255 255
-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-255 255 255  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  170 85 0  170 170 170  170 170 170  85 85 85
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  170 85 0  85 255 85  170 85 0  170 170 170  85 85 85
-85 85 85  0 0 0  0 0 0  85 85 85  170 85 0  85 255 85
-170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-85 85 85  85 85 85  170 85 0  0 0 0  85 85 85  85 85 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 255
-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-170 170 170  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  170 170 170  170 85 0  170 170 170  170 85 0
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  255 85 85  170 170 170  85 255 85  170 85 0
-85 85 85  85 85 85  170 85 0  85 85 85  170 170 170  85 85 85
-170 170 170  170 85 0  85 85 85  85 85 85  85 85 85  85 85 85
-170 85 0  85 255 85  85 85 85  85 85 85  85 85 85  170 85 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  170 170 170
-255 255 255  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 85 0  170 170 170  170 85 0  85 85 85  0 0 0
-85 85 85  85 85 85  85 255 85  170 170 170  170 170 170  170 85 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  85 255 85  255 85 85  170 170 170  170 170 170
-170 170 170  85 255 85  170 170 170  170 85 0  170 170 170  170 85 0
-170 170 170  85 85 85  85 255 85  170 85 0  170 170 170  170 85 0
-170 170 170  170 170 170  170 85 0  85 85 85  85 85 85  85 255 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  170 170 170  170 170 170  0 0 0  0 0 0  85 85 85
-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  255 255 85  85 85 85  85 85 85  85 85 85
-85 255 85  255 85 85  170 170 170  170 85 0  170 170 170  85 255 85
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  170 85 0  170 170 170  170 170 170  255 255 85
-170 170 170  255 85 85  170 170 170  170 170 170  255 255 85  170 170 170
-85 255 85  170 170 170  255 85 85  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  170 85 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  85 85 85  0 0 0  85 85 85
-85 85 85  170 85 0  85 85 85  0 0 0  85 85 85  85 85 85
-85 85 85  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 85 85
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  85 85 85  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  170 170 170  255 255 85  170 170 170  170 170 170
-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 85 0
-170 170 170  255 255 85  170 170 170  255 255 85  170 170 170  255 255 85
-170 170 170  255 255 85  170 170 170  170 170 170  85 255 85  170 85 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  170 170 170  85 85 85  85 85 85  0 0 0
-85 85 85  85 85 85  170 170 170  85 85 85  170 170 170  170 85 0
-170 170 170  85 255 85  170 170 170  170 85 0  170 170 170  170 170 170
-255 255 85  170 170 170  170 170 170  255 255 255  255 255 85  170 170 170
-255 255 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  255 255 255
-170 170 170  255 255 255  255 255 85  170 170 170  255 255 85  170 170 170
-255 255 85  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  255 85 85  170 170 170  170 170 170
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  170 85 0  85 85 85
-85 85 85  255 255 85  170 170 170  170 170 170  170 170 170  170 170 170
-255 255 85  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
-170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
-170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 255 85  170 170 170  255 255 85  255 255 255  255 255 255
-255 255 255  170 170 170  255 255 255  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  255 255 85  170 170 170  255 255 85  255 255 255
-255 255 85  255 255 255  255 255 85  170 170 170  170 170 170  170 85 0
-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  255 255 85
-255 255 255  255 255 255  255 255 85  255 255 255  255 255 255  170 170 170
-255 255 85  85 85 85  85 85 85  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  170 170 170  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  170 170 170  170 170 170  170 170 170  255 255 255  170 170 170
-255 255 255  255 255 255  255 255 255  170 170 170  170 170 170  255 255 85
-170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
-255 255 255  255 255 255  170 170 170  255 255 85  170 170 170  255 255 85
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  170 170 170
-255 255 85  170 170 170  170 170 170  255 255 255  255 255 255  255 255 255
-170 170 170  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
-255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  255 255 255
-170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 170 170  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  85 85 85  85 85 85  0 0 0
-85 85 85  170 85 0  255 255 255  170 170 170  255 255 255  255 255 255
-255 255 85  255 255 255  170 170 170  255 255 85  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  255 255 85  255 255 255  255 255 255
-170 170 170  255 255 255  255 255 255  170 170 170  170 170 170  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 255 85  170 170 170
-170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
-255 255 255  255 255 255  255 255 85  170 170 170  170 170 170  255 255 255
-170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  255 255 85
-170 170 170  170 85 0  85 85 85  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  170 170 170  170 170 170  255 255 85  170 170 170  255 255 255
-255 255 255  170 170 170  255 255 255  170 170 170  170 170 170  255 255 85
-170 170 170  255 255 85  170 170 170  255 255 255  170 170 170  255 255 255
-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  255 255 85
-85 85 85  85 85 85  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  170 170 170
-170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
-170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
-255 255 85  255 255 255  170 170 170  255 255 255  170 170 170  170 170 170
-170 170 170  170 170 170  85 85 85  0 0 0  85 85 85  85 85 85
-0 0 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-85 85 85  85 85 85  170 170 170  170 170 170  255 255 255  170 170 170
-255 255 255  170 170 170  255 255 85  170 170 170  170 170 170  170 170 170
-255 85 85  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
-170 170 170  255 255 255  255 255 255  170 170 170  255 255 255  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  170 170 170
-255 255 85  170 170 170  255 255 255  170 170 170  255 255 255  255 255 255
-255 255 85  255 255 255  170 170 170  255 255 85  170 170 170  170 170 170
-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 255 85
-170 170 170  170 85 0  85 85 85  0 0 0  85 85 85  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  170 170 170  170 170 170
-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  255 255 85  170 170 170  170 170 170
-255 255 85  170 170 170  170 170 170  170 170 170  170 170 170  255 85 85
-85 255 85  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
-255 255 255  255 255 255  255 255 255  255 255 85  170 170 170  170 170 170
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  255 255 85
-170 170 170  170 170 170  255 255 255  255 255 255  255 255 255  170 170 170
-255 255 255  170 170 170  170 170 170  170 170 170  170 170 170  255 85 85
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  85 85 85  85 85 85  0 0 0  85 85 85  0 0 0
-85 85 85  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  170 170 170  170 170 170  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  170 85 0  170 170 170  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  85 255 85
-255 85 85  170 170 170  255 255 85  170 170 170  170 170 170  255 255 255
-255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  170 170 170
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
-170 170 170  255 255 85  170 170 170  255 255 85  255 255 255  255 255 255
-170 170 170  170 170 170  255 255 85  170 170 170  255 85 85  85 255 85
-170 170 170  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
-170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  85 85 85  85 85 85  85 85 85  170 170 170  255 255 85
-170 170 170  170 85 0  170 170 170  170 170 170  170 85 0  85 85 85
-170 170 170  170 85 0  85 85 85  170 170 170  170 170 170  170 170 170
-170 170 170  255 255 255  255 255 255  255 255 85  170 170 170  170 170 170
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
-170 170 170  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
-255 255 255  170 170 170  170 170 170  170 85 0  170 170 170  85 85 85
-170 170 170  170 170 170  170 85 0  170 170 170  170 85 0  85 85 85
-85 255 85  85 85 85  0 0 0  0 0 0  0 0 0  85 85 85
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
-170 85 0  170 170 170  85 255 85  170 85 0  170 170 170  85 85 85
-170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  255 255 255
-255 255 85  255 255 255  170 170 170  170 170 170  170 170 170  170 85 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
-170 170 170  255 255 85  170 170 170  170 170 170  85 255 85  170 170 170
-170 85 0  170 85 0  170 170 170  85 255 85  85 85 85  170 170 170
-170 85 0  85 85 85  0 0 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  85 85 85  170 85 0  85 85 85
-170 170 170  170 85 0  170 170 170  85 85 85  170 170 170  170 85 0
-170 170 170  85 255 85  170 85 0  170 170 170  170 170 170  170 170 170
-255 255 255  170 170 170  255 255 255  255 255 255  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-170 85 0  170 170 170  255 255 85  170 170 170  255 255 255  170 170 170
-170 170 170  170 170 170  170 170 170  170 85 0  170 170 170  170 85 0
-170 170 170  85 255 85  170 85 0  170 170 170  170 85 0  85 85 85
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-85 255 85  170 170 170  170 85 0  170 170 170  170 85 0  85 255 85
-170 170 170  170 85 0  170 170 170  170 170 170  170 170 170  255 255 85
-170 170 170  255 255 255  170 170 170  170 170 170  170 170 170  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 85 0  85 85 85  170 170 170  255 255 85  170 170 170
-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 85 0
-170 170 170  85 85 85  170 170 170  170 85 0  170 170 170  85 85 85
-170 85 0  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  0 0 0  85 85 85  170 85 0
-85 85 85  255 85 85  85 255 85  170 85 0  170 170 170  170 170 170
-170 85 0  170 170 170  85 85 85  255 255 85  170 170 170  170 170 170
-255 255 255  170 170 170  255 255 255  255 255 85  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  170 170 170  170 85 0  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  255 255 85  85 85 85  170 170 170
-85 255 85  255 85 85  170 170 170  85 255 85  255 85 85  85 255 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  85 85 85  0 0 0  85 85 85
-85 85 85  85 255 85  255 85 85  170 170 170  85 255 85  170 85 0
-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  255 255 255
-170 170 170  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  170 170 170  85 85 85  255 255 85
-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  255 255 85
-85 85 85  255 255 85  170 170 170  170 85 0  170 170 170  85 85 85
-170 85 0  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 170 170  170 85 0  170 170 170  170 85 0  170 170 170  170 170 170
-170 85 0  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
-255 255 85  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
-170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  255 255 85  170 170 170  170 85 0
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-170 85 0  85 255 85  170 170 170  170 170 170  255 255 85  170 170 170
-255 255 85  170 170 170  170 170 170  170 170 170  255 255 255  255 255 255
-255 255 255  170 170 170  255 255 85  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  170 85 0
-170 170 170  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
-170 170 170  255 255 85  170 170 170  170 170 170  170 170 170  170 170 170
-170 170 170  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  170 85 0  170 170 170  170 85 0  170 170 170  170 170 170
-170 170 170  255 255 85  170 170 170  255 255 85  170 170 170  255 255 255
-170 170 170  255 255 255  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  85 85 85  85 85 85  85 85 85
-170 85 0  170 170 170  170 85 0  255 255 85  170 170 170  170 170 170
-170 170 170  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
-255 255 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  170 170 170  255 255 85  170 170 170  255 255 85  170 170 170
-170 170 170  255 255 255  255 255 255  255 255 255  255 255 255  255 255 255
-170 170 170  170 170 170  170 170 170  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 170 0  85 85 85
-170 85 0  85 255 85  170 170 170  170 170 170  170 170 170  255 255 85
-255 255 255  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
-170 170 170  255 255 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-170 85 0  170 170 170  170 170 170  170 170 170  170 170 170  255 255 85
-170 170 170  255 255 255  170 170 170  255 255 255  170 170 170  255 255 255
-255 255 255  255 255 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  170 85 0  170 170 170  170 170 170  255 255 85  170 170 170
-170 170 170  255 255 255  255 255 255  255 255 255  170 170 170  255 255 255
-170 170 170  170 170 170  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 255 85
-170 170 170  255 255 85  170 170 170  255 255 85  255 255 255  255 255 255
-255 255 255  255 255 255  255 255 255  255 255 255  255 255 255  170 170 170
-170 170 170  170 170 170  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  85 85 85  170 85 0  170 170 170  170 170 170
-255 255 85  170 170 170  255 255 255  255 255 85  255 255 255  255 255 255
-170 170 170  255 255 85  170 170 170  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
-170 170 170  170 170 170  170 170 170  255 255 255  170 170 170  255 255 255
-170 170 170  255 255 255  170 170 170  255 255 255  255 255 85  255 255 255
-170 170 170  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  170 85 0  85 85 85  170 170 170  170 170 170  170 170 170
-170 170 170  255 255 255  170 170 170  255 255 255  255 255 255  170 170 170
-255 255 85  170 170 170  170 170 170  170 85 0  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
-255 255 85  170 170 170  255 255 85  170 170 170  255 255 255  255 255 255
-255 255 255  255 255 255  255 255 255  255 255 255  170 170 170  170 170 170
-170 170 170  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  170 85 0  170 170 170
-255 255 85  170 170 170  255 255 85  255 255 255  170 170 170  255 255 255
-170 170 170  170 170 170  170 170 170  170 170 170  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 170 170
-170 85 0  170 170 170  255 255 255  170 170 170  255 255 255  170 170 170
-255 255 255  255 255 255  170 170 170  255 255 255  255 255 85  170 170 170
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  85 85 85  170 85 0  85 85 85  170 170 170
-170 170 170  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
-255 255 85  170 170 170  170 85 0  85 255 85  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  170 85 0
-170 170 170  170 170 170  255 255 85  170 170 170  255 255 255  255 255 255
-255 255 85  255 255 255  170 170 170  255 255 255  170 170 170  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-170 85 0  170 170 170  170 170 170  255 255 85  170 170 170  170 170 170
-170 170 170  170 170 170  170 170 170  170 85 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-255 255 85  170 170 170  170 170 170  170 170 170  255 255 85  170 170 170
-255 255 255  170 170 170  255 255 85  170 170 170  85 85 85  85 85 85
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  170 170 170
-170 85 0  170 170 170  170 85 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  85 85 85  85 85 85
-170 170 170  170 170 170  255 255 85  170 170 170  170 170 170  170 170 170
-170 170 170  255 255 255  170 170 170  170 170 170  85 85 85  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-85 85 85  85 85 85  85 85 85  170 85 0  85 85 85  170 85 0
-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  170 85 0
-85 85 85  170 85 0  170 170 170  170 170 170  170 170 170  255 255 85
-170 170 170  170 170 170  170 85 0  85 85 85  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  85 85 85  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  85 85 85
-85 85 85  85 255 85  170 85 0  170 170 170  170 85 0  170 170 170
-85 85 85  85 85 85  85 85 85  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  85 85 85  85 85 85  85 85 85  85 85 85  85 85 85
-85 85 85  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85  85  85  85  85  85  85  85  85  85
+ 85  85  85  85  85  85  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85  85  85  85
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+ 85  85  85  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85 170 170 170   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+170 170 170 170 170 170  85  85  85   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170 170 170 170 170 170
+170 170 170   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+ 85  85  85 170 170 170 170 170 170 170 170 170
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 170 170 170 255 255 255 255 255 255
+255 255 255 170 170 170   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+170 170 170 170 170 170 255 255 255 255 255 255
+  0   0   0   0   0   0   0   0   0   0   0   0
+170 170 170 255 255 255 170 170 170 170 170 170
+255 255 255 170 170 170   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+170 170 170   0   0   0   0   0   0 255 255 255
+ 85  85  85   0   0   0   0   0   0   0   0   0
+255 255 255 170 170 170   0   0   0  85  85  85
+170 170 170 255 255 255 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+ 85  85  85   0   0   0   0   0   0 170 170 170
+ 85  85  85   0   0   0   0   0   0   0   0   0
+255 255 255  85  85  85   0   0   0   0   0   0
+ 85  85  85 255 255 255 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+170 170 170   0   0   0   0   0   0 170 170 170
+ 85  85  85  85  85  85  85  85  85  85  85  85
+255 255 255  85  85  85   0   0   0   0   0   0
+ 85  85  85 255 255 255 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+255 255 255   0   0   0   0   0   0 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0   0   0   0   0   0   0
+ 85  85  85 255 255 255   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+170 170 170 170 170 170 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170 170 170 170 170 170   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85  85  85  85   0   0   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85  85  85  85   0   0   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 170  85   0
+170  85   0 170  85   0  85  85  85   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85  85  85  85   0   0   0
+ 85  85  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0  85  85  85   0   0   0
+  0   0   0  85  85  85 170 170 170  85  85  85
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85  85  85  85   0   0   0
+ 85  85  85 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170 170 170 170 170 170 170 170 170   0   0   0
+  0   0   0   0   0   0 170 170 170 170 170 170
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+ 85  85  85 170 170 170 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170  85  85  85
+  0   0   0   0   0   0  85  85  85  85  85  85
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+ 85  85  85 170 170 170 170 170 170 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0  85  85  85
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0 170 170 170
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0  85  85  85 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0  85  85  85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+ 85  85  85 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+170 170 170 170 170 170 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170  85  85  85
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 170 170
+  0   0   0   0   0   0   0   0   0  85  85  85
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+ 85  85  85   0   0   0   0   0   0  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+  0   0   0   0   0   0  85  85  85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170   0   0   0  85  85  85
+ 85  85  85   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+  0   0   0  85  85  85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170   0   0   0  85  85  85
+ 85  85  85   0   0   0  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0  85  85  85
+  0   0   0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0  85  85  85   0   0   0
+  0   0   0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0  85  85  85   0   0   0
+ 85  85  85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0  85  85  85   0   0   0   0   0   0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255   0   0   0
+ 85  85  85  85  85  85  85  85  85  85  85  85
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85   0   0   0 170  85   0
+255 255  85 170  85   0   0   0   0   0   0   0
+ 85  85  85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0  85  85  85  85  85  85   0   0   0
+  0   0   0  85  85  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0   0   0   0
+  0   0   0  85  85  85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255  85 170  85   0 255 255  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85  85  85  85
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+  0   0   0   0   0   0  85  85  85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255  85
+170  85   0 255 255  85 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0   0   0   0   0   0   0  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170  85   0
+255 255  85 170  85   0 255 255  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0 170  85   0
+255 255  85 170  85   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85   0   0   0   0   0   0   0   0   0
+ 85  85  85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255  85
+170  85   0 255 255  85 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0 255 255  85
+170  85   0 255 255  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85   0   0   0   0   0   0
+  0   0   0  85  85  85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85   0   0   0
+  0   0   0   0   0   0  85  85  85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85   0   0   0   0   0   0   0   0   0
+ 85  85  85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170  85  85  85 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85  85  85  85  85  85  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170  85  85  85  85  85  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+ 85  85  85   0   0   0   0   0   0 170  85   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170  85  85  85
+  0   0   0   0   0   0   0   0   0 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170  85  85  85  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0 170  85   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 170  85   0
+170  85   0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170  85  85  85
+ 85  85  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85 170  85   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 170  85   0 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 170  85   0
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0  85  85  85 170  85   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 170  85   0 170  85   0 170  85   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 170  85   0
+170  85   0   0   0   0   0   0   0   0   0   0
+ 85  85  85  85  85  85  85  85  85  85  85  85
+ 85  85  85  85  85  85  85  85  85  85  85  85
+ 85  85  85  85  85  85  85  85  85   0   0   0
+  0   0   0   0   0   0   0   0   0 170  85   0
+170  85   0 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 255 255  85 170  85   0
+170  85   0 170  85   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 255 255  85 170  85   0
+255 255  85 170  85   0 170  85   0 170  85   0
+ 85  85  85  85  85  85  85  85  85  85  85  85
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0  85  85  85
+ 85  85  85  85  85  85  85  85  85 170  85   0
+170  85   0 170  85   0 170  85   0 255 255  85
+170  85   0 255 255  85 170  85   0 170  85   0
+170  85   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0 170  85   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+170  85   0 170  85   0 170  85   0 170  85   0
+170  85   0 170  85   0 170  85   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
+  0   0   0   0   0   0   0   0   0   0   0   0
-- 
GitLab


From 5e42336a461a2354b640001323cd07cebd9ade6e Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 27 Apr 2009 19:18:22 +0100
Subject: [PATCH 0948/1421] ASoC: Fix logic in WM8350 master clocking check

We need to check only if the WM8350 is master and only when starting
the stream so if either is not true then we can skip the check.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8350.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 3b1d0993bed..0275321ff8a 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -968,7 +968,7 @@ static int wm8350_pcm_trigger(struct snd_pcm_substream *substream,
 	 * required for LRC in master mode. The DACs or ADCs need a
 	 * valid audio path i.e. pin -> ADC or DAC -> pin before
 	 * the LRC will be enabled in master mode. */
-	if (!master && cmd != SNDRV_PCM_TRIGGER_START)
+	if (!master || cmd != SNDRV_PCM_TRIGGER_START)
 		return 0;
 
 	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
-- 
GitLab


From 0c95de73a711d376dc17afe484f919bd5b66c016 Mon Sep 17 00:00:00 2001
From: Jon Smirl <jonsmirl@gmail.com>
Date: Mon, 27 Apr 2009 12:44:41 -0400
Subject: [PATCH 0949/1421] ASoC: Set the MPC5200 i2s driver to BROKEN status.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/fsl/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 9fc90828337..e7dd79a1d8c 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -21,7 +21,7 @@ config SND_SOC_MPC8610_HPCD
 
 config SND_SOC_MPC5200_I2S
 	tristate "Freescale MPC5200 PSC in I2S mode driver"
-	depends on PPC_MPC52xx && PPC_BESTCOMM
+	depends on PPC_MPC52xx && PPC_BESTCOMM && BROKEN
 	select SND_SOC_OF_SIMPLE
 	select PPC_BESTCOMM_GEN_BD
 	help
-- 
GitLab


From 010db4d127d1ae7324d5e00035fe4362e27f0508 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:27:21 -0700
Subject: [PATCH 0950/1421] RDMA/nes: Modify thermo mitigation to flip SerDes1
 ref clk to internal

Change thermo mitigation code to flip the SerDes1 reference clock to
internal, to match the change in commit a4849fc1 ("RDMA/nes: Add
wide_ppm_offset parm for switch compatibility").

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_hw.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index d6fc9ae4406..7e20a7fd3c3 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -550,11 +550,8 @@ struct nes_adapter *nes_init_adapter(struct nes_device *nesdev, u8 hw_rev) {
 			msleep(1);
 		}
 		if (int_cnt > 1) {
-			u32 sds;
 			spin_lock_irqsave(&nesadapter->phy_lock, flags);
-			sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
-			sds |= 0x00000040;
-			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F0C8);
 			mh_detected++;
 			reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
 			reset_value |= 0x0000003d;
@@ -579,7 +576,7 @@ struct nes_adapter *nes_init_adapter(struct nes_device *nesdev, u8 hw_rev) {
 					if (++ext_cnt > int_cnt) {
 						spin_lock_irqsave(&nesadapter->phy_lock, flags);
 						nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1,
-								0x0000F0C8);
+								0x0000F088);
 						mh_detected++;
 						reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
 						reset_value |= 0x0000003d;
-- 
GitLab


From 366835e24977f4590ef353bdc70f0dda278c2a84 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:28:41 -0700
Subject: [PATCH 0951/1421] RDMA/nes: Correct CDR loop filter setting for port
 1

In commit 1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is
a mistake in the clean up code that removed port 1 CDR loop filter
settings for 10G cards other than CX4.  Put the correct setting back
for appropriate PHY types.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_hw.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 7e20a7fd3c3..b5d9c4bae45 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -761,6 +761,9 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
 			return 0;
 
 		/* init serdes 1 */
+		if (!(OneG_Mode && (nesadapter->phy_type[1] != NES_PHY_TYPE_PUMA_1G)))
+			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
+
 		switch (nesadapter->phy_type[1]) {
 		case NES_PHY_TYPE_ARGUS:
 		case NES_PHY_TYPE_SFP_D:
@@ -768,21 +771,20 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
 			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000);
 			break;
 		case NES_PHY_TYPE_CX4:
-			sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
-			sds &= 0xFFFFFFBF;
-			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
 			if (wide_ppm_offset)
 				nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000FFFAA);
-			else
-				nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
 			break;
 		case NES_PHY_TYPE_PUMA_1G:
 			sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
 			sds |= 0x000000100;
 			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
 		}
-		if (!OneG_Mode)
+		if (!OneG_Mode) {
 			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000);
+			sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
+			sds &= 0xFFFFFFBF;
+			nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+		}
 	} else {
 		/* init serdes 0 */
 		nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, 0x00000008);
-- 
GitLab


From e998c25bc29f2b409b39fa63dad3df499982a887 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:29:42 -0700
Subject: [PATCH 0952/1421] RDMA/nes: Enable repause timer for port 1

Enable repause timer for port 1.  Without this setting, under stress,
the chip may misbehave.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_hw.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index b5d9c4bae45..2aa021655e3 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -912,6 +912,12 @@ static void nes_init_csr_ne020(struct nes_device *nesdev, u8 hw_rev, u8 port_cou
 		u32temp &= 0x7fffffff;
 		u32temp |= 0x7fff0010;
 		nes_write_indexed(nesdev, 0x000021f8, u32temp);
+		if (port_count > 1) {
+			u32temp = nes_read_indexed(nesdev, 0x000023f8);
+			u32temp &= 0x7fffffff;
+			u32temp |= 0x7fff0010;
+			nes_write_indexed(nesdev, 0x000023f8, u32temp);
+		}
 	}
 }
 
-- 
GitLab


From 923223776b53013443d062a87e0a3d57d6513f04 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:30:35 -0700
Subject: [PATCH 0953/1421] RDMA/nes: Set trace length to 1 inch for SFP_D

With updated PHY firmware for SFP_D, setting the trace length to 1
inch for SFP_D provides a more stable link.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 2aa021655e3..b832a7b814a 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1371,13 +1371,14 @@ int nes_init_phy(struct nes_device *nesdev)
 		if (phy_type == NES_PHY_TYPE_ARGUS) {
 			nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C);
 			nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008);
+			nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
 		} else {
 			nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x0004);
 			nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0038);
+			nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0013);
 		}
 		nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098);
 		nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00);
-		nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
 
 		/* setup LEDs */
 		nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd006, 0x0007);
-- 
GitLab


From 0e4562da9e533188108d00022cf3650cb9e29aae Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:33:48 -0700
Subject: [PATCH 0954/1421] RDMA/nes: Fix fw_ver in /sys

/sys/class/infiniband/nes?/fw_ver is not displaying firmware version
properly (it shows 0.0.0 with the current code).  Fill in the correct
firmware version number.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_verbs.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 8b460c2ce89..64d5cfd8f38 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2808,10 +2808,9 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr,
 	struct nes_vnic *nesvnic = nesibdev->nesvnic;
 
 	nes_debug(NES_DBG_INIT, "\n");
-	return sprintf(buf, "%x.%x.%x\n",
-			(int)(nesvnic->nesdev->nesadapter->fw_ver >> 32),
-			(int)(nesvnic->nesdev->nesadapter->fw_ver >> 16) & 0xffff,
-			(int)(nesvnic->nesdev->nesadapter->fw_ver & 0xffff));
+	return sprintf(buf, "%u.%u\n",
+		(nesvnic->nesdev->nesadapter->firmware_version >> 16),
+		(nesvnic->nesdev->nesadapter->firmware_version & 0x000000ff));
 }
 
 
-- 
GitLab


From 1f0dba1e51cfc93bf4545811839a84c879086fd4 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:36:03 -0700
Subject: [PATCH 0955/1421] RDMA/nes: Fix unused variable compile warning when
 INFINIBAND_NES_DEBUG=n

Remove the NES_DEBUG that is causing the compile warning about an
unused variable when INFINIBAND_NES_DEBUG is not enabled.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index dbd9a75474e..7da5437d985 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -854,7 +854,6 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core,
 {
 	unsigned long flags;
 	struct nes_cm_listener *listen_node;
-	__be32 tmp_addr = cpu_to_be32(dst_addr);
 
 	/* walk list and find cm_node associated with this session ID */
 	spin_lock_irqsave(&cm_core->listen_list_lock, flags);
@@ -871,9 +870,6 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core,
 	}
 	spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
 
-	nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
-		  &tmp_addr, dst_port);
-
 	/* no listener */
 	return NULL;
 }
-- 
GitLab


From 53094c388f11d79f742eaf743c9fd740a881f2c0 Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Mon, 27 Apr 2009 13:37:34 -0700
Subject: [PATCH 0956/1421] RDMA/nes: Do not set apbvt entry for loopback

When a connect request comes, apbvt should only be set for
non-loopback connections.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 7da5437d985..1efe0beca06 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2955,6 +2955,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	struct nes_device *nesdev;
 	struct nes_cm_node *cm_node;
 	struct nes_cm_info cm_info;
+	int apbvt_set = 0;
 
 	ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
 	if (!ibqp)
@@ -2992,9 +2993,11 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		conn_param->private_data_len);
 
 	if (cm_id->local_addr.sin_addr.s_addr !=
-		cm_id->remote_addr.sin_addr.s_addr)
+		cm_id->remote_addr.sin_addr.s_addr) {
 		nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
 			PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+		apbvt_set = 1;
+	}
 
 	/* set up the connection params for the node */
 	cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr);
@@ -3011,8 +3014,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		conn_param->private_data_len, (void *)conn_param->private_data,
 		&cm_info);
 	if (!cm_node) {
-		if (cm_id->local_addr.sin_addr.s_addr !=
-				cm_id->remote_addr.sin_addr.s_addr)
+		if (apbvt_set)
 			nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
 				PCI_FUNC(nesdev->pcidev->devfn),
 				NES_MANAGE_APBVT_DEL);
@@ -3021,7 +3023,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		return -ENOMEM;
 	}
 
-	cm_node->apbvt_set = 1;
+	cm_node->apbvt_set = apbvt_set;
 	nesqp->cm_node = cm_node;
 	cm_node->nesqp = nesqp;
 	nes_add_ref(&nesqp->ibqp);
-- 
GitLab


From c11470f9f4d4490cd7e9563f604c4c7868caf6de Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Mon, 27 Apr 2009 13:38:31 -0700
Subject: [PATCH 0957/1421] RDMA/nes: Check for sequence number wrap-around

check_seq() was not checking if the seq#s have wrapped.  Fix it.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 1efe0beca06..1f7a659e6e9 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -56,6 +56,7 @@
 #include <net/neighbour.h>
 #include <net/route.h>
 #include <net/ip_fib.h>
+#include <net/tcp.h>
 
 #include "nes.h"
 
@@ -1514,7 +1515,7 @@ static int check_seq(struct nes_cm_node *cm_node, struct tcphdr *tcph,
 	rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
 	if (ack_seq != loc_seq_num)
 		err = 1;
-	else if ((seq + rcv_wnd) < rcv_nxt)
+	else if (!between(seq, rcv_nxt, (rcv_nxt+rcv_wnd)))
 		err = 1;
 	if (err) {
 		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
-- 
GitLab


From 4e9c390036196f89208cf9574dfd19daae146776 Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Mon, 27 Apr 2009 13:39:36 -0700
Subject: [PATCH 0958/1421] RDMA/nes: Increase rexmit timeout interval

Under heavy load with large cluster testing, it may take longer to
receive a response to MPA requests.  Change the driver to wait longer
after each rexmit to max time value.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 6 +++++-
 drivers/infiniband/hw/nes/nes_cm.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 1f7a659e6e9..4969c386785 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -541,6 +541,7 @@ static void nes_cm_timer_tick(unsigned long pass)
 	struct list_head *list_node;
 	struct nes_cm_core *cm_core = g_cm_core;
 	u32 settimer = 0;
+	unsigned long timetosend;
 	int ret = NETDEV_TX_OK;
 
 	struct list_head timer_list;
@@ -645,8 +646,11 @@ static void nes_cm_timer_tick(unsigned long pass)
 				send_entry->retrycount);
 			if (send_entry->send_retrans) {
 				send_entry->retranscount--;
+				timetosend = (NES_RETRY_TIMEOUT <<
+					(NES_DEFAULT_RETRANS - send_entry->retranscount));
+
 				send_entry->timetosend = jiffies +
-					NES_RETRY_TIMEOUT;
+					min(timetosend, NES_MAX_TIMEOUT);
 				if (nexttimeout > send_entry->timetosend ||
 					!settimer) {
 					nexttimeout = send_entry->timetosend;
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index 80bba189257..8b7e7c0e496 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -149,6 +149,7 @@ struct nes_timer_entry {
 #endif
 #define NES_SHORT_TIME      (10)
 #define NES_LONG_TIME       (2000*HZ/1000)
+#define NES_MAX_TIMEOUT     ((unsigned long) (12*HZ))
 
 #define NES_CM_HASHTABLE_SIZE         1024
 #define NES_CM_TCP_TIMER_INTERVAL     3000
-- 
GitLab


From 109d67e4f12b828113ca8ccf4a735972dd984f40 Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Mon, 27 Apr 2009 13:41:06 -0700
Subject: [PATCH 0959/1421] RDMA/nes: Fix hang issues for large cluster dynamic
 connections

Running large cluster setup, we are hanging after many hours of
testing.  Fixing this required going over the code and making sure the
rexmit entry was properly removed based on the cm_node's state and
packet received.  Also when receiving a FIN packet, check seq# and
make sure there were no errors before calling handle_fin().

Following are the changes done in nes_cm.c:

* handle_ack_pkt() needs to return error value, so in case of error,
  handle_fin() is not called. Some cleanup done while going over the code.

* handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing.

* process_packet(), in case of FIN only packet is received, call
  check_seq() before processing.

* in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all
  conditions, even if the packets need to be dropped.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 56 +++++++++++++-----------------
 1 file changed, 25 insertions(+), 31 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 4969c386785..2c90b38daef 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1326,18 +1326,20 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node)
 	nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
 		"refcnt=%d\n", cm_node, cm_node->state,
 		atomic_read(&cm_node->ref_count));
-	cm_node->tcp_cntxt.rcv_nxt++;
-	cleanup_retrans_entry(cm_node);
 	switch (cm_node->state) {
 	case NES_CM_STATE_SYN_RCVD:
 	case NES_CM_STATE_SYN_SENT:
 	case NES_CM_STATE_ESTABLISHED:
 	case NES_CM_STATE_MPAREQ_SENT:
 	case NES_CM_STATE_MPAREJ_RCVD:
+		cm_node->tcp_cntxt.rcv_nxt++;
+		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_LAST_ACK;
 		send_fin(cm_node, NULL);
 		break;
 	case NES_CM_STATE_FIN_WAIT1:
+		cm_node->tcp_cntxt.rcv_nxt++;
+		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_CLOSING;
 		send_ack(cm_node, NULL);
 		/* Wait for ACK as this is simultanous close..
@@ -1345,11 +1347,15 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node)
 		* Just rm the node.. Done.. */
 		break;
 	case NES_CM_STATE_FIN_WAIT2:
+		cm_node->tcp_cntxt.rcv_nxt++;
+		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_TIME_WAIT;
 		send_ack(cm_node, NULL);
 		schedule_nes_timer(cm_node, NULL,  NES_TIMER_TYPE_CLOSE, 1, 0);
 		break;
 	case NES_CM_STATE_TIME_WAIT:
+		cm_node->tcp_cntxt.rcv_nxt++;
+		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_CLOSED;
 		rem_ref_cm_node(cm_node->cm_core, cm_node);
 		break;
@@ -1385,7 +1391,6 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		passive_state = atomic_add_return(1, &cm_node->passive_state);
 		if (passive_state ==  NES_SEND_RESET_EVENT)
 			create_event(cm_node, NES_CM_EVENT_RESET);
-		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_CLOSED;
 		dev_kfree_skb_any(skb);
 		break;
@@ -1399,17 +1404,16 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		active_open_err(cm_node, skb, reset);
 		break;
 	case NES_CM_STATE_CLOSED:
-		cleanup_retrans_entry(cm_node);
 		drop_packet(skb);
 		break;
+	case NES_CM_STATE_LAST_ACK:
+		cm_node->cm_id->rem_ref(cm_node->cm_id);
 	case NES_CM_STATE_TIME_WAIT:
-		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_CLOSED;
 		rem_ref_cm_node(cm_node->cm_core, cm_node);
 		drop_packet(skb);
 		break;
 	case NES_CM_STATE_FIN_WAIT1:
-		cleanup_retrans_entry(cm_node);
 		nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
 	default:
 		drop_packet(skb);
@@ -1456,6 +1460,7 @@ static void handle_rcv_mpa(struct nes_cm_node *cm_node, struct sk_buff *skb)
 				NES_PASSIVE_STATE_INDICATED);
 		break;
 	case NES_CM_STATE_MPAREQ_SENT:
+		cleanup_retrans_entry(cm_node);
 		if (res_type == NES_MPA_REQUEST_REJECT) {
 			type = NES_CM_EVENT_MPA_REJECT;
 			cm_node->state = NES_CM_STATE_MPAREJ_RCVD;
@@ -1653,49 +1658,39 @@ static void handle_synack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	}
 }
 
-static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	struct tcphdr *tcph)
 {
 	int datasize = 0;
 	u32 inc_sequence;
 	u32 rem_seq_ack;
 	u32 rem_seq;
-	int ret;
+	int ret = 0;
 	int optionsize;
 	optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
 
 	if (check_seq(cm_node, tcph, skb))
-		return;
+		return -EINVAL;
 
 	skb_pull(skb, tcph->doff << 2);
 	inc_sequence = ntohl(tcph->seq);
 	rem_seq = ntohl(tcph->seq);
 	rem_seq_ack =  ntohl(tcph->ack_seq);
 	datasize = skb->len;
-	cleanup_retrans_entry(cm_node);
 	switch (cm_node->state) {
 	case NES_CM_STATE_SYN_RCVD:
 		/* Passive OPEN */
+		cleanup_retrans_entry(cm_node);
 		ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 1);
 		if (ret)
 			break;
 		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
-		if (cm_node->tcp_cntxt.rem_ack_num !=
-		    cm_node->tcp_cntxt.loc_seq_num) {
-			nes_debug(NES_DBG_CM, "rem_ack_num != loc_seq_num\n");
-			cleanup_retrans_entry(cm_node);
-			send_reset(cm_node, skb);
-			return;
-		}
 		cm_node->state = NES_CM_STATE_ESTABLISHED;
-		cleanup_retrans_entry(cm_node);
 		if (datasize) {
 			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
 			handle_rcv_mpa(cm_node, skb);
-		} else { /* rcvd ACK only */
+		} else  /* rcvd ACK only */
 			dev_kfree_skb_any(skb);
-			cleanup_retrans_entry(cm_node);
-		 }
 		break;
 	case NES_CM_STATE_ESTABLISHED:
 		/* Passive OPEN */
@@ -1707,15 +1702,12 @@ static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 			drop_packet(skb);
 		break;
 	case NES_CM_STATE_MPAREQ_SENT:
-		cleanup_retrans_entry(cm_node);
 		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
 		if (datasize) {
 			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
 			handle_rcv_mpa(cm_node, skb);
-		} else { /* Could be just an ack pkt.. */
-			cleanup_retrans_entry(cm_node);
+		} else  /* Could be just an ack pkt.. */
 			dev_kfree_skb_any(skb);
-		}
 		break;
 	case NES_CM_STATE_LISTENING:
 	case NES_CM_STATE_CLOSED:
@@ -1723,11 +1715,10 @@ static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		send_reset(cm_node, skb);
 		break;
 	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_CLOSING:
 		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_CLOSED;
 		cm_node->cm_id->rem_ref(cm_node->cm_id);
-	case NES_CM_STATE_CLOSING:
-		cleanup_retrans_entry(cm_node);
 		rem_ref_cm_node(cm_node->cm_core, cm_node);
 		drop_packet(skb);
 		break;
@@ -1742,9 +1733,11 @@ static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	case NES_CM_STATE_MPAREQ_RCVD:
 	case NES_CM_STATE_UNKNOWN:
 	default:
+		cleanup_retrans_entry(cm_node);
 		drop_packet(skb);
 		break;
 	}
+	return ret;
 }
 
 
@@ -1850,6 +1843,7 @@ static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	enum nes_tcpip_pkt_type	pkt_type = NES_PKT_TYPE_UNKNOWN;
 	struct tcphdr *tcph = tcp_hdr(skb);
 	u32     fin_set = 0;
+	int ret = 0;
 	skb_pull(skb, ip_hdr(skb)->ihl << 2);
 
 	nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
@@ -1875,17 +1869,17 @@ static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		handle_synack_pkt(cm_node, skb, tcph);
 		break;
 	case NES_PKT_TYPE_ACK:
-		handle_ack_pkt(cm_node, skb, tcph);
-		if (fin_set)
+		ret = handle_ack_pkt(cm_node, skb, tcph);
+		if (fin_set && !ret)
 			handle_fin_pkt(cm_node);
 		break;
 	case NES_PKT_TYPE_RST:
 		handle_rst_pkt(cm_node, skb, tcph);
 		break;
 	default:
-		drop_packet(skb);
-		if (fin_set)
+		if ((fin_set) && (!check_seq(cm_node, tcph, skb)))
 			handle_fin_pkt(cm_node);
+		drop_packet(skb);
 		break;
 	}
 }
-- 
GitLab


From 9256b2513074164b4555617c4a3b82d36abf03e5 Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Mon, 27 Apr 2009 13:45:19 -0700
Subject: [PATCH 0960/1421] RDMA/nes: Fix error path in nes_accept()

If reg_phys_mem() fails, we need to free memory allocated for MPA
frame with private data before returning the error. Also move
nes_add_ref() after the reg_phys_mem() is successful.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 2c90b38daef..11c7d664201 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2705,7 +2705,6 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	/* associate the node with the QP */
 	nesqp->cm_node = (void *)cm_node;
 	cm_node->nesqp = nesqp;
-	nes_add_ref(&nesqp->ibqp);
 
 	nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n",
 		nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener);
@@ -2758,6 +2757,9 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 			nes_debug(NES_DBG_CM, "Unable to register memory region"
 					"for lSMM for cm_node = %p \n",
 					cm_node);
+			pci_free_consistent(nesdev->pcidev,
+				nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
+				nesqp->ietf_frame, nesqp->ietf_frame_pbase);
 			return -ENOMEM;
 		}
 
@@ -2874,6 +2876,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 
 	/* notify OF layer that accept event was successful */
 	cm_id->add_ref(cm_id);
+	nes_add_ref(&nesqp->ibqp);
 
 	cm_event.event = IW_CM_EVENT_ESTABLISHED;
 	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
-- 
GitLab


From 26cc5e57bbe770916bc67af169477fdd3ea1be4c Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Mon, 27 Apr 2009 13:46:29 -0700
Subject: [PATCH 0961/1421] RDMA/nes: Update iw_nes version

Update version number to 1.5.0.0

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 17621de54a9..bf1720f7f35 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -56,10 +56,8 @@
 
 #define QUEUE_DISCONNECTS
 
-#define DRV_BUILD   "1"
-
 #define DRV_NAME    "iw_nes"
-#define DRV_VERSION "1.0 KO Build " DRV_BUILD
+#define DRV_VERSION "1.5.0.0"
 #define PFX         DRV_NAME ": "
 
 /*
-- 
GitLab


From b2ad5e1e709e404dd637097411f1853d37926a6a Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Tue, 28 Apr 2009 00:37:53 +0100
Subject: [PATCH 0962/1421] FRV: Remove unused header asm/init.h.

It seems nothing has included the frv asm/init.h header for some time, and its
actual contents are out of date with include/linux/init.h.  So just delete it.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/init.h | 12 ------------
 1 file changed, 12 deletions(-)
 delete mode 100644 arch/frv/include/asm/init.h

diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h
deleted file mode 100644
index 8b15838de21..00000000000
--- a/arch/frv/include/asm/init.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_INIT_H
-#define _ASM_INIT_H
-
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
-/* For assembly routines */
-#define __INIT		.section	".text.init",#alloc,#execinstr
-#define __FINIT		.previous
-#define __INITDATA	.section	".data.init",#alloc,#write
-
-#endif
-
-- 
GitLab


From df1f6d200c1e20788184251c49f349b38d90889c Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Tue, 28 Apr 2009 00:37:58 +0100
Subject: [PATCH 0963/1421] FRV: Use __INIT macro instead of .text.init.

FRV is placing some code in the .text.init section but does not reference that
section in its linker scripts.

This change moves this code from the .text.init section to the .init.text
section, which is presumably where it belongs.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/head-mmu-fr451.S | 3 ++-
 arch/frv/kernel/head-uc-fr401.S  | 3 ++-
 arch/frv/kernel/head-uc-fr451.S  | 3 ++-
 arch/frv/kernel/head-uc-fr555.S  | 3 ++-
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/frv/kernel/head-mmu-fr451.S b/arch/frv/kernel/head-mmu-fr451.S
index c8f210d84ff..98f87d586e5 100644
--- a/arch/frv/kernel/head-mmu-fr451.S
+++ b/arch/frv/kernel/head-mmu-fr451.S
@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -31,7 +32,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################
diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S
index ee282be20ff..438643cfa38 100644
--- a/arch/frv/kernel/head-uc-fr401.S
+++ b/arch/frv/kernel/head-uc-fr401.S
@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -30,7 +31,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################
diff --git a/arch/frv/kernel/head-uc-fr451.S b/arch/frv/kernel/head-uc-fr451.S
index b10d9c8295d..b2a76c4a178 100644
--- a/arch/frv/kernel/head-uc-fr451.S
+++ b/arch/frv/kernel/head-uc-fr451.S
@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -30,7 +31,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################
diff --git a/arch/frv/kernel/head-uc-fr555.S b/arch/frv/kernel/head-uc-fr555.S
index 39937c19b46..5497aaf34f7 100644
--- a/arch/frv/kernel/head-uc-fr555.S
+++ b/arch/frv/kernel/head-uc-fr555.S
@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -29,7 +30,7 @@
 #define __551_LCR	0xfeff1100
 #define __551_LSBR	0xfeff1c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################
-- 
GitLab


From 991da17ec0b9f396154c8120ffd10e5d7d7aa361 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Mon, 27 Apr 2009 14:02:22 -0400
Subject: [PATCH 0964/1421] arm: Use __INIT macro instead of .text.init.

arm is placing some code in the .text.init section, but it does not
reference that section in its linker scripts.

This change moves this code from the .text.init section to the
.init.text section, which is presumably where it belongs.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mm/proc-v6.S | 3 ++-
 arch/arm/mm/proc-v7.S | 3 ++-
 arch/arm/mm/tlb-v6.S  | 3 ++-
 arch/arm/mm/tlb-v7.S  | 3 ++-
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index f0cc599facb..087e239704d 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -10,6 +10,7 @@
  *
  *  This is the "shell" of the ARMv6 processor support.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -132,7 +133,7 @@ cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
 	.align
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 /*
  *	__v6_setup
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index d1ebec42521..c221e26ac1d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -9,6 +9,7 @@
  *
  *  This is the "shell" of the ARMv7 processor support.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -153,7 +154,7 @@ cpu_v7_name:
 	.ascii	"ARMv7 Processor"
 	.align
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 /*
  *	__v7_setup
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index 20f84bbaa9b..73d7d89b04c 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -10,6 +10,7 @@
  *  ARM architecture version 6 TLB handling functions.
  *  These assume a split I/D TLB.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
@@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 	.type	v6wbi_tlb_fns, #object
 ENTRY(v6wbi_tlb_fns)
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index 24ba5109f2e..b637e7380ab 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -11,6 +11,7 @@
  *  ARM architecture version 6 TLB handling functions.
  *  These assume a split I/D TLB.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
@@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	pc, lr
 ENDPROC(v7wbi_flush_kern_tlb_range)
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 	.type	v7wbi_tlb_fns, #object
 ENTRY(v7wbi_tlb_fns)
-- 
GitLab


From edada399e81303e85a1090b3cf0f3c5b13ff5f53 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Mon, 27 Apr 2009 14:02:23 -0400
Subject: [PATCH 0965/1421] powerpc: Use TEXT_TEXT macro in linker script.

Rather than adding .ref.text to the powerpc linker script so that we
can use __REF on the powerpc architecture, it seems simpler to switch
to using the generic TEXT_TEXT macro.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index d7425fffbc1..433ae118406 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -54,7 +54,8 @@ SECTIONS
 		ALIGN_FUNCTION();
 		HEAD_TEXT
 		_text = .;
-		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
+		TEXT_TEXT
+		*(.fixup __ftr_alt_*)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
-- 
GitLab


From 9203fc9c1266ed21c327f679ad05e53509dfbee1 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Mon, 27 Apr 2009 14:02:24 -0400
Subject: [PATCH 0966/1421] powerpc: Use __REF macro instead of old
 .text.init.refok.

The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead.  This patch cleans up a few
uses of .text.init.refok in the powerpc architecture.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/include/asm/ppc_asm.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index f59a66684ae..384d90c9c27 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -4,6 +4,7 @@
 #ifndef _ASM_POWERPC_PPC_ASM_H
 #define _ASM_POWERPC_PPC_ASM_H
 
+#include <linux/init.h>
 #include <linux/stringify.h>
 #include <asm/asm-compat.h>
 #include <asm/processor.h>
@@ -189,7 +190,7 @@ name: \
 GLUE(.,name):
 
 #define _INIT_GLOBAL(name) \
-	.section ".text.init.refok"; \
+	__REF; \
 	.align 2 ; \
 	.globl name; \
 	.globl GLUE(.,name); \
@@ -229,7 +230,7 @@ name: \
 GLUE(.,name):
 
 #define _INIT_STATIC(name) \
-	.section ".text.init.refok"; \
+	__REF; \
 	.align 2 ; \
 	.section ".opd","aw"; \
 name: \
-- 
GitLab


From 882016ff3659126f6da50cf7cb84a0a15d00a87b Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Mon, 27 Apr 2009 14:02:25 -0400
Subject: [PATCH 0967/1421] sh: Use __INIT macro instead of .text.init.

The sh architecture has some code in the .text.init section, but it
does not reference that section in its linker scripts.

This change moves this code from the .text.init section to the
.init.text section, which is presumably where it belongs.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sh/kernel/cpu/sh5/entry.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index e640c63d581..7e49cb812f8 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/errno.h>
+#include <linux/init.h>
 #include <linux/sys.h>
 #include <cpu/registers.h>
 #include <asm/processor.h>
@@ -2058,10 +2059,10 @@ asm_uaccess_end:
 
 
 /*
- * --- .text.init Section
+ * --- .init.text Section
  */
 
-	.section	.text.init, "ax"
+	__INIT
 
 /*
  * void trap_init (void)
-- 
GitLab


From a0871e8cb8c3f5ee2ecc560ae73a35cd420440f9 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Mon, 27 Apr 2009 14:02:26 -0400
Subject: [PATCH 0968/1421] sparc: cleanup references to deprecated .text.init*
 sections.

The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead.  This patch cleans up a few
uses of .text.init.refok in the sparc architecture.

Also fix a reference to .text.init in a comment that wasn't updated to
.init.text.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/kernel/head_32.S | 2 +-
 arch/sparc/kernel/head_64.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index e91f01a5759..6b4d8acc4c8 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -735,7 +735,7 @@ go_to_highmem:
 		 nop
 
 /* The code above should be at beginning and we have to take care about
- * short jumps, as branching to .text.init section from .text is usually
+ * short jumps, as branching to .init.text section from .text is usually
  * impossible */
 		__INIT
 /* Acquire boot time privileged register values, this will help debugging.
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 3a1b7bf03cf..91bf4c7f79b 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -467,7 +467,7 @@ jump_to_sun4u_init:
 	jmpl    %g2 + %g0, %g0
 	 nop
 
-	.section	.text.init.refok
+	__REF
 sun4u_init:
 	BRANCH_IF_SUN4V(g1, sun4v_init)
 
-- 
GitLab


From 27b1833279995e7c290a40cac4ef36ccea7e9283 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Mon, 27 Apr 2009 14:02:27 -0400
Subject: [PATCH 0969/1421] Remove unused support code for refok sections.

The old refok sections

  .text.init.refok
  .data.init.refok
  .exit.text.refok

have been deprecated since commit
312b1485fb509c9bc32eda28ad29537896658cb8.  After the other patches in
this patch series nothing is put in these sections, so clean things up
by eliminating all the remaining references to them.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/vmlinux.lds.h |  3 ---
 include/linux/init.h              |  8 --------
 scripts/mod/modpost.c             | 18 ------------------
 3 files changed, 29 deletions(-)

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index eaa06ef6f7d..89853bcd27a 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -90,7 +90,6 @@
 /* .data section */
 #define DATA_DATA							\
 	*(.data)							\
-	*(.data.init.refok)						\
 	*(.ref.data)							\
 	DEV_KEEP(init.data)						\
 	DEV_KEEP(exit.data)						\
@@ -289,8 +288,6 @@
 		*(.text.hot)						\
 		*(.text)						\
 		*(.ref.text)						\
-		*(.text.init.refok)					\
-		*(.exit.text.refok)					\
 	DEV_KEEP(init.text)						\
 	DEV_KEEP(exit.text)						\
 	CPU_KEEP(init.text)						\
diff --git a/include/linux/init.h b/include/linux/init.h
index 20a1334e34e..0e06c176f18 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -62,14 +62,6 @@
 #define __refdata        __section(.ref.data)
 #define __refconst       __section(.ref.rodata)
 
-/* backward compatibility note
- *  A few places hardcode the old section names:
- *  .text.init.refok
- *  .data.init.refok
- *  .exit.text.refok
- *  They should be converted to use the defines from this file
- */
-
 /* compatibility defines */
 #define __init_refok     __ref
 #define __initdata_refok __refdata
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index df6e6286a06..8d46ea7d671 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -794,15 +794,6 @@ static const char *init_exit_sections[] =
 /* data section */
 static const char *data_sections[] = { DATA_SECTIONS, NULL };
 
-/* sections that may refer to an init/exit section with no warning */
-static const char *initref_sections[] =
-{
-	".text.init.refok*",
-	".exit.text.refok*",
-	".data.init.refok*",
-	NULL
-};
-
 
 /* symbols in .data that may refer to init/exit sections */
 static const char *symbol_white_list[] =
@@ -915,11 +906,6 @@ static int section_mismatch(const char *fromsec, const char *tosec)
 /**
  * Whitelist to allow certain references to pass with no warning.
  *
- * Pattern 0:
- *   Do not warn if funtion/data are marked with __init_refok/__initdata_refok.
- *   The pattern is identified by:
- *   fromsec = .text.init.refok* | .data.init.refok*
- *
  * Pattern 1:
  *   If a module parameter is declared __initdata and permissions=0
  *   then this is legal despite the warning generated.
@@ -958,10 +944,6 @@ static int section_mismatch(const char *fromsec, const char *tosec)
 static int secref_whitelist(const char *fromsec, const char *fromsym,
 			    const char *tosec, const char *tosym)
 {
-	/* Check for pattern 0 */
-	if (match(fromsec, initref_sections))
-		return 0;
-
 	/* Check for pattern 1 */
 	if (match(tosec, init_data_sections) &&
 	    match(fromsec, data_sections) &&
-- 
GitLab


From 2e8aead1b57ede7979bd4e24797c77e181775d9c Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 17 Apr 2009 08:03:01 +0000
Subject: [PATCH 0970/1421] powerpc: ppc32 needs elf_read_implies_exec()

On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries
because old toolchains had bugs where they didn't mark program
segments executable that needed to be.  For some reason we didn't do
this on ppc32 builds.  This hadn't been an issue until commit 8d30c14c
("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side
effect that we are now enforcing execute permissions to some extent on
32-bit 4xx and Book E processors.

This fixes it by defining elf_read_implies_exec on 32-bit to turn on
the read-implies-exec behaviour on programs that are sufficiently old
that they don't have a PT_GNU_STACK program header.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/elf.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 087c22f1d36..d6b4a12cdef 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -260,6 +260,7 @@ do {								\
 #else 
 # define SET_PERSONALITY(ex) \
   set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;
-- 
GitLab


From ff61e5ccc35b7159a50741fc4b992817785acd5c Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 22 Apr 2009 22:43:03 +0000
Subject: [PATCH 0971/1421] powerpc/cell: Select PCI for IBM_CELL_BLADE AND
 CELLEB

Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not
select PCI. This can lead to a config with the former and the latter
disabled, which does not build.

To fix this PPC_CELL_NATIVE should select PCI. However, that would
force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So
instead move the select of PPC_OF_PLATFORM_PCI and PCI under both
IBM_CELL_BLADE and CELLEB.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/cell/Kconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 40e24c39ad0..50f17bdd3c1 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -13,7 +13,6 @@ config PPC_CELL_COMMON
 config PPC_CELL_NATIVE
 	bool
 	select PPC_CELL_COMMON
-	select PPC_OF_PLATFORM_PCI
 	select MPIC
 	select IBM_NEW_EMAC_EMAC4
 	select IBM_NEW_EMAC_RGMII
@@ -25,6 +24,8 @@ config PPC_IBM_CELL_BLADE
 	bool "IBM Cell Blade"
 	depends on PPC64 && PPC_BOOK3S
 	select PPC_CELL_NATIVE
+	select PPC_OF_PLATFORM_PCI
+	select PCI
 	select MMIO_NVRAM
 	select PPC_UDBG_16550
 	select UDBG_RTAS_CONSOLE
@@ -33,6 +34,8 @@ config PPC_CELLEB
 	bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
 	depends on PPC64 && PPC_BOOK3S
 	select PPC_CELL_NATIVE
+	select PPC_OF_PLATFORM_PCI
+	select PCI
 	select HAS_TXX9_SERIAL
 	select PPC_UDBG_BEAT
 	select USB_OHCI_BIG_ENDIAN_MMIO
-- 
GitLab


From d8f48457d5af6601abdecaad7a95c45bfeef90d5 Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Thu, 16 Apr 2009 09:05:37 +0000
Subject: [PATCH 0972/1421] powerpc/ps3: Fix build error on UP

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the PS3 smp.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop'
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/ps3/setup.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 66181821322..1a7b5ae0c83 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -45,10 +45,6 @@
 DEFINE_MUTEX(ps3_gpu_mutex);
 EXPORT_SYMBOL_GPL(ps3_gpu_mutex);
 
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
 static union ps3_firmware_version ps3_firmware_version;
 
 void ps3_get_firmware_version(union ps3_firmware_version *v)
-- 
GitLab


From 3f68165e234233255a789c827c5d3d6fa965ddce Mon Sep 17 00:00:00 2001
From: Giuliano Pochini <pochini@shiny.it>
Date: Mon, 27 Apr 2009 23:23:29 +0200
Subject: [PATCH 0973/1421] ALSA: indigo-express: add missing 64KHz flags

Indigo-express cards also support 64KHz sampling rate: this patch adds
missing SNDRV_PCM_RATE_64000 flags.

Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/echoaudio/indigodjx.c | 1 +
 sound/pci/echoaudio/indigoiox.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c
index 3482ef69f49..2e44316530a 100644
--- a/sound/pci/echoaudio/indigodjx.c
+++ b/sound/pci/echoaudio/indigodjx.c
@@ -88,6 +88,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = {
 	.rates = 	SNDRV_PCM_RATE_32000 |
 			SNDRV_PCM_RATE_44100 |
 			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_64000 |
 			SNDRV_PCM_RATE_88200 |
 			SNDRV_PCM_RATE_96000,
 	.rate_min = 32000,
diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c
index aebee27a40f..eb3819f9654 100644
--- a/sound/pci/echoaudio/indigoiox.c
+++ b/sound/pci/echoaudio/indigoiox.c
@@ -89,6 +89,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = {
 	.rates = 	SNDRV_PCM_RATE_32000 |
 			SNDRV_PCM_RATE_44100 |
 			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_64000 |
 			SNDRV_PCM_RATE_88200 |
 			SNDRV_PCM_RATE_96000,
 	.rate_min = 32000,
-- 
GitLab


From 2008f137e92220b98120c4803499cdddb2b0fb06 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 28 Apr 2009 12:25:59 +0200
Subject: [PATCH 0974/1421] ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some
 drivers

Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that
really don't give the precise pointer value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/isa/msnd/msnd.c                  | 6 ++++--
 sound/pci/bt87x.c                      | 6 ++++--
 sound/pci/korg1212/korg1212.c          | 6 ++++--
 sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c | 3 ++-
 sound/soc/au1x/dbdma2.c                | 2 +-
 sound/soc/fsl/mpc5200_psc_i2s.c        | 3 ++-
 sound/soc/sh/dma-sh7760.c              | 3 ++-
 sound/sparc/dbri.c                     | 3 ++-
 sound/usb/usx2y/usbusx2yaudio.c        | 3 ++-
 9 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c
index 906454413ed..3a1526ae172 100644
--- a/sound/isa/msnd/msnd.c
+++ b/sound/isa/msnd/msnd.c
@@ -438,7 +438,8 @@ static void snd_msnd_capture_reset_queue(struct snd_msnd *chip,
 static struct snd_pcm_hardware snd_msnd_playback = {
 	.info =			SNDRV_PCM_INFO_MMAP |
 				SNDRV_PCM_INFO_INTERLEAVED |
-				SNDRV_PCM_INFO_MMAP_VALID,
+				SNDRV_PCM_INFO_MMAP_VALID |
+				SNDRV_PCM_INFO_BATCH,
 	.formats =		SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
 	.rates =		SNDRV_PCM_RATE_8000_48000,
 	.rate_min =		8000,
@@ -456,7 +457,8 @@ static struct snd_pcm_hardware snd_msnd_playback = {
 static struct snd_pcm_hardware snd_msnd_capture = {
 	.info =			SNDRV_PCM_INFO_MMAP |
 				SNDRV_PCM_INFO_INTERLEAVED |
-				SNDRV_PCM_INFO_MMAP_VALID,
+				SNDRV_PCM_INFO_MMAP_VALID |
+				SNDRV_PCM_INFO_BATCH,
 	.formats =		SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
 	.rates =		SNDRV_PCM_RATE_8000_48000,
 	.rate_min =		8000,
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index a299340519d..ce3f2e90f4d 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -349,7 +349,8 @@ static struct snd_pcm_hardware snd_bt87x_digital_hw = {
 	.info = SNDRV_PCM_INFO_MMAP |
 		SNDRV_PCM_INFO_INTERLEAVED |
 		SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_MMAP_VALID,
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_BATCH,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 	.rates = 0, /* set at runtime */
 	.channels_min = 2,
@@ -365,7 +366,8 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = {
 	.info = SNDRV_PCM_INFO_MMAP |
 		SNDRV_PCM_INFO_INTERLEAVED |
 		SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_MMAP_VALID,
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_BATCH,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
 	.rates = SNDRV_PCM_RATE_KNOT,
 	.rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX,
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 8b79969034b..7cc38a11e99 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -1238,7 +1238,8 @@ static struct snd_pcm_hardware snd_korg1212_playback_info =
 {
 	.info =              (SNDRV_PCM_INFO_MMAP |
                               SNDRV_PCM_INFO_MMAP_VALID |
-                              SNDRV_PCM_INFO_INTERLEAVED),
+			      SNDRV_PCM_INFO_INTERLEAVED |
+			      SNDRV_PCM_INFO_BATCH),
 	.formats =	      SNDRV_PCM_FMTBIT_S16_LE,
         .rates =              (SNDRV_PCM_RATE_44100 |
                               SNDRV_PCM_RATE_48000),
@@ -1258,7 +1259,8 @@ static struct snd_pcm_hardware snd_korg1212_capture_info =
 {
         .info =              (SNDRV_PCM_INFO_MMAP |
                               SNDRV_PCM_INFO_MMAP_VALID |
-                              SNDRV_PCM_INFO_INTERLEAVED),
+			      SNDRV_PCM_INFO_INTERLEAVED |
+			      SNDRV_PCM_INFO_BATCH),
         .formats =	      SNDRV_PCM_FMTBIT_S16_LE,
         .rates =	      (SNDRV_PCM_RATE_44100 |
                               SNDRV_PCM_RATE_48000),
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
index 01066c95580..d057e648964 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
@@ -240,7 +240,8 @@ static int pdacf_pcm_prepare(struct snd_pcm_substream *subs)
 static struct snd_pcm_hardware pdacf_pcm_capture_hw = {
 	.info =			(SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 				 SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
-				 SNDRV_PCM_INFO_MMAP_VALID),
+				 SNDRV_PCM_INFO_MMAP_VALID |
+				 SNDRV_PCM_INFO_BATCH),
 	.formats =		SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
 				SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |
 				SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c
index 30490a25914..594c6c5b783 100644
--- a/sound/soc/au1x/dbdma2.c
+++ b/sound/soc/au1x/dbdma2.c
@@ -82,7 +82,7 @@ static struct au1xpsc_audio_dmadata *au1xpsc_audio_pcmdma[2];
 /* PCM hardware DMA capabilities - platform specific */
 static const struct snd_pcm_hardware au1xpsc_pcm_hardware = {
 	.info		  = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
-			    SNDRV_PCM_INFO_INTERLEAVED,
+			    SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
 	.formats	  = AU1XPSC_PCM_FMTS,
 	.period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES,
 	.period_bytes_max = 4096 * 1024 - 1,
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 3aa729df27b..1111c710118 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -504,7 +504,8 @@ static struct snd_soc_dai psc_i2s_dai_template = {
 
 static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
 	.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
-		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER,
+		SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_BATCH,
 	.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
 		   SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
 	.rate_min = 8000,
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
index 0dad3a0bb92..baddb1242c7 100644
--- a/sound/soc/sh/dma-sh7760.c
+++ b/sound/soc/sh/dma-sh7760.c
@@ -103,7 +103,8 @@ static struct snd_pcm_hardware camelot_pcm_hardware = {
 	.info = (SNDRV_PCM_INFO_MMAP |
 		SNDRV_PCM_INFO_INTERLEAVED |
 		SNDRV_PCM_INFO_BLOCK_TRANSFER |
-		SNDRV_PCM_INFO_MMAP_VALID),
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_BATCH),
 	.formats =	DMABRG_FMTS,
 	.rates =	DMABRG_RATES,
 	.rate_min =		8000,
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index af95ff1e126..1d2e51b3f91 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -1975,7 +1975,8 @@ static struct snd_pcm_hardware snd_dbri_pcm_hw = {
 	.info		= SNDRV_PCM_INFO_MMAP |
 			  SNDRV_PCM_INFO_INTERLEAVED |
 			  SNDRV_PCM_INFO_BLOCK_TRANSFER |
-			  SNDRV_PCM_INFO_MMAP_VALID,
+			  SNDRV_PCM_INFO_MMAP_VALID |
+			  SNDRV_PCM_INFO_BATCH,
 	.formats	= SNDRV_PCM_FMTBIT_MU_LAW |
 			  SNDRV_PCM_FMTBIT_A_LAW |
 			  SNDRV_PCM_FMTBIT_U8 |
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index 9a608fa8515..dd1ab617784 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -870,7 +870,8 @@ static struct snd_pcm_hardware snd_usX2Y_2c =
 {
 	.info =			(SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
 				 SNDRV_PCM_INFO_BLOCK_TRANSFER |
-				 SNDRV_PCM_INFO_MMAP_VALID),
+				 SNDRV_PCM_INFO_MMAP_VALID |
+				 SNDRV_PCM_INFO_BATCH),
 	.formats =                 SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE,
 	.rates =                   SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
 	.rate_min =                44100,
-- 
GitLab


From 3e5b50165fd0be080044586f43fcdd460ed27610 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 28 Apr 2009 12:07:08 +0200
Subject: [PATCH 0975/1421] ALSA: pcm core - Avoid jiffies check for devices
 with BATCH flag

The hardware devices with SNDRV_PCM_INFO_BATCH flag can't give the
precise current position.  And such hardwares have often big FIFO
in addition to the ring buffer, and it screws up the jiffies check
in pcm_lib.c.

This patch adds a simple check of info flag so that the driver skips
the jiffies check in snd_pcm_period_elapsed() when BATCH flag is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/pcm_lib.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 63d088f2265..a2a792c18c4 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -249,6 +249,12 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 			new_hw_ptr = hw_base + pos;
 		}
 	}
+	/* Skip the jiffies check for hardwares with BATCH flag.
+	 * Such hardware usually just increases the position at each IRQ,
+	 * thus it can't give any strange position.
+	 */
+	if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
+		goto no_jiffies_check;
 	hdelta = new_hw_ptr - old_hw_ptr;
 	jdelta = jiffies - runtime->hw_ptr_jiffies;
 	if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
@@ -272,6 +278,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 		hw_base -= hw_base % runtime->buffer_size;
 		delta = 0;
 	}
+ no_jiffies_check:
 	if (delta > runtime->period_size + runtime->period_size / 2) {
 		hw_ptr_error(substream,
 			     "Lost interrupts? "
-- 
GitLab


From fd9db7297749c05fcf5721ce5393a5a8b8772f2a Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 28 Apr 2009 16:56:35 +0200
Subject: [PATCH 0976/1421] fuse: destroy bdi on error

Destroy bdi on error in fuse_fill_super().

This was an omission from commit 26c3679101dbccc054dcf370143941844ba70531
"fuse: destroy bdi on umount", which moved the bdi_destroy() call from
fuse_conn_put() to fuse_put_super().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
---
 fs/fuse/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 459b73dd45e..75ca5ac603a 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -908,6 +908,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
  err_put_root:
 	dput(root_dentry);
  err_put_conn:
+	bdi_destroy(&fc->bdi);
 	fuse_conn_put(fc);
  err_fput:
 	fput(file);
-- 
GitLab


From 18cc8d8d9b74c446832336d8f6e1afb145f9431b Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Tue, 28 Apr 2009 18:18:05 +0900
Subject: [PATCH 0977/1421] ASoC: TWL4030: Fix gain control for earpiece
 amplifier

The gain control for earpiece amplifier uses 0dB ~ 12dB according to the
TRM, but the present code is implemented to -6dB ~ 6dB.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/twl4030.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 921b205de28..df7c8c281d2 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -835,6 +835,12 @@ static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0);
  */
 static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
 
+/*
+ * Gain control for earpiece amplifier
+ * 0 dB to 12 dB in 6 dB steps (mute instead of -6)
+ */
+static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1);
+
 /*
  * Capture gain after the ADCs
  * from 0 dB to 31 dB in 1 dB steps
@@ -900,7 +906,7 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = {
 		4, 3, 0, output_tvl),
 
 	SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
-		TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
+		TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl),
 
 	/* Common capture gain controls */
 	SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
-- 
GitLab


From 6d3d4be40357e3ea43b5c8837dec01d8f6cd1c67 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 28 Apr 2009 16:42:39 +0200
Subject: [PATCH 0978/1421] CRIS: Wire up syscalls signalfd4 to writev.

Adds sys_signalfd4, sys_eventfd2, sys_epoll_create1, sys_dup3,
sys_pipe2, sys_inotify_init1, sys_preadv, sys_pwritev
for both CRISv10 and CRISv32.
---
 arch/cris/arch-v10/kernel/entry.S | 14 +++++++++++---
 arch/cris/arch-v32/kernel/entry.S |  8 ++++++++
 arch/cris/include/asm/unistd.h    | 12 ++++++++++--
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index 72f5cd319b9..2c18d08cd91 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -536,10 +536,10 @@ multiple_interrupt:
 	movem	$r13, [$sp]
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
-	
+
 	move.d  $sp, $r10
 	jsr	do_multiple_IRQ
-	
+
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
 	pop	$r0			; Restore r0. 
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
-	
+
 	.global kernel_execve
 kernel_execve:
 	move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 5e674c8f7c5..435b9671bd4 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -852,6 +852,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime       /* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h
index 235d076379d..c17079388bb 100644
--- a/arch/cris/include/asm/unistd.h
+++ b/arch/cris/include/asm/unistd.h
@@ -281,7 +281,7 @@
 #define __NR_mbind		274
 #define __NR_get_mempolicy	275
 #define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
+#define __NR_mq_open		277
 #define __NR_mq_unlink		(__NR_mq_open+1)
 #define __NR_mq_timedsend	(__NR_mq_open+2)
 #define __NR_mq_timedreceive	(__NR_mq_open+3)
@@ -331,10 +331,18 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 327
+#define NR_syscalls 335
 
 #include <arch/unistd.h>
 
-- 
GitLab


From 384318ecd2eb4fdbcbe7c4df6e8bb55986bf52d4 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pingc@wacom.com>
Date: Tue, 28 Apr 2009 07:49:54 -0700
Subject: [PATCH 0979/1421] Input: wacom - fix TabletPC touch bug

This patch fixed a bug that was introduced in kernel 2.6.28 for
TabletPC touch data. The wacom_parse_hid routine in wacom_sys.c
should always return 0 even when usb_control_msg got an error.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom.h     |  5 +++--
 drivers/input/tablet/wacom_sys.c | 13 +++++++++++--
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 677680e9f54..9710bfd49cf 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -11,7 +11,7 @@
  *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
  *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
  *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2008 Ping Cheng		<pingc@wacom.com>
+ *  Copyright (c) 2002-2009 Ping Cheng		<pingc@wacom.com>
  *
  *  ChangeLog:
  *      v0.1 (vp)  - Initial release
@@ -67,6 +67,7 @@
  *      v1.47 (pc) - Added support for Bamboo
  *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
  *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
+ *      v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
  */
 
 /*
@@ -87,7 +88,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.49"
+#define DRIVER_VERSION "v1.50"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 484496daa0f..b8624f27abf 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			5000); /* 5 secs */
 	} while (result < 0 && limit++ < 5);
 
+	/* No need to parse the Descriptor. It isn't an error though */
 	if (result < 0)
 		goto out;
 
@@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 		}
 	}
 
-	result = 0;
-
  out:
+	result = 0;
 	kfree(report);
 	return result;
 }
@@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
+	/* Initialize touch_x_max and touch_y_max in case it is not defined */
+	if (wacom_wac->features->type == TABLETPC) {
+		features->touch_x_max = 1023;
+		features->touch_y_max = 1023;
+	} else {
+		features->touch_x_max = 0;
+		features->touch_y_max = 0;
+	}
+
 	/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
 	if (wacom_wac->features->type == TABLETPC) {
 		if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
-- 
GitLab


From 0385c5ee3ca96bfe244610bf459abf66682ff202 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Tue, 28 Apr 2009 07:49:53 -0700
Subject: [PATCH 0980/1421] Input: appletouch - fix DMA to/from stack buffer

CONFIG_DMA_API_DEBUG spotted an instance of appletouch using
an array on the stack as a DMA buffer for certain hardware.
Change it to use a kmalloc()ed buffer instead.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/appletouch.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 454b96112f0..e0140fdc02a 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output");
  */
 static int atp_geyser_init(struct usb_device *udev)
 {
-	char data[8];
+	char *data;
 	int size;
 	int i;
+	int ret;
+
+	data = kmalloc(8, GFP_KERNEL);
+	if (!data) {
+		err("Out of memory");
+		return -ENOMEM;
+	}
 
 	size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			ATP_GEYSER_MODE_READ_REQUEST_ID,
 			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			ATP_GEYSER_MODE_REQUEST_VALUE,
-			ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+			ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
 		dprintk("atp_geyser_init: read error\n");
@@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
 		err("Failed to read mode from device.");
-		return -EIO;
+		ret = -EIO;
+		goto out_free;
 	}
 
 	/* Apply the mode switch */
@@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev)
 			ATP_GEYSER_MODE_WRITE_REQUEST_ID,
 			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			ATP_GEYSER_MODE_REQUEST_VALUE,
-			ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+			ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
 		dprintk("atp_geyser_init: write error\n");
@@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
 		err("Failed to request geyser raw mode");
-		return -EIO;
+		ret = -EIO;
+		goto out_free;
 	}
-	return 0;
+	ret = 0;
+out_free:
+	kfree(data);
+	return ret;
 }
 
 /*
-- 
GitLab


From 9894cf0ff5e9ccda60d8d0e2d37bd61539b08826 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Mon, 27 Apr 2009 11:52:42 -0700
Subject: [PATCH 0981/1421] Input: bcm5974 - prepare for a new trackpad header
 type

The new unibody Macbooks are equipped with an integrated button and
trackpad. The package header of the trackpad interface has changed to
also contain information about the integrated button.  This patch
performs the necessary preparations to allow for the new package
header.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 47 +++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2998a6ac9ae..bda873393b0 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -96,14 +96,15 @@ struct bt_data {
 	u8 rel_y;		/* relative y coordinate */
 };
 
-/* trackpad header structure */
-struct tp_header {
-	u8 unknown1[16];	/* constants, timers, etc */
-	u8 fingers;		/* number of fingers on trackpad */
-	u8 unknown2[9];		/* constants, timers, etc */
+/* trackpad header types */
+enum tp_type {
+	TYPE1			/* plain trackpad */
 };
 
-/* trackpad finger structure */
+/* trackpad finger data offsets, le16-aligned */
+#define FINGER_TYPE1		(13 * sizeof(__le16))
+
+/* trackpad finger structure, le16-aligned */
 struct tp_finger {
 	__le16 origin;		/* zero when switching track finger */
 	__le16 abs_x;		/* absolute x coodinate */
@@ -117,13 +118,11 @@ struct tp_finger {
 	__le16 force_minor;	/* trackpad force, minor axis? */
 	__le16 unused[3];	/* zeros */
 	__le16 multi;		/* one finger: varies, more fingers: constant */
-};
+} __attribute__((packed,aligned(2)));
 
-/* trackpad data structure, empirically at least ten fingers */
-struct tp_data {
-	struct tp_header header;
-	struct tp_finger finger[16];
-};
+/* trackpad finger data size, empirically at least ten fingers */
+#define SIZEOF_FINGER		sizeof(struct tp_finger)
+#define SIZEOF_ALL_FINGERS	(16 * SIZEOF_FINGER)
 
 /* device-specific parameters */
 struct bcm5974_param {
@@ -139,6 +138,8 @@ struct bcm5974_config {
 	int bt_ep;		/* the endpoint of the button interface */
 	int bt_datalen;		/* data length of the button interface */
 	int tp_ep;		/* the endpoint of the trackpad interface */
+	enum tp_type tp_type;	/* type of trackpad interface */
+	int tp_offset;		/* offset to trackpad finger data */
 	int tp_datalen;		/* data length of the trackpad interface */
 	struct bcm5974_param p;	/* finger pressure limits */
 	struct bcm5974_param w;	/* finger width limits */
@@ -158,7 +159,7 @@ struct bcm5974 {
 	struct urb *bt_urb;		/* button usb request block */
 	struct bt_data *bt_data;	/* button transferred data */
 	struct urb *tp_urb;		/* trackpad usb request block */
-	struct tp_data *tp_data;	/* trackpad transferred data */
+	u8 *tp_data;			/* trackpad transferred data */
 	int fingers;			/* number of fingers on trackpad */
 };
 
@@ -184,7 +185,7 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
 		USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
 		0x84, sizeof(struct bt_data),
-		0x81, sizeof(struct tp_data),
+		0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
 		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
 		{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
@@ -195,7 +196,7 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
 		USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
 		0x84, sizeof(struct bt_data),
-		0x81, sizeof(struct tp_data),
+		0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
 		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
 		{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
@@ -276,18 +277,21 @@ static int report_bt_state(struct bcm5974 *dev, int size)
 static int report_tp_state(struct bcm5974 *dev, int size)
 {
 	const struct bcm5974_config *c = &dev->cfg;
-	const struct tp_finger *f = dev->tp_data->finger;
+	const struct tp_finger *f;
 	struct input_dev *input = dev->input;
-	const int fingers = (size - 26) / 28;
-	int raw_p, raw_w, raw_x, raw_y;
+	int raw_p, raw_w, raw_x, raw_y, raw_n;
 	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
 	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
-	if (size < 26 || (size - 26) % 28 != 0)
+	if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
 		return -EIO;
 
+	/* finger data, le16-aligned */
+	f = (const struct tp_finger *)(dev->tp_data + c->tp_offset);
+	raw_n = (size - c->tp_offset) / SIZEOF_FINGER;
+
 	/* always track the first finger; when detached, start over */
-	if (fingers) {
+	if (raw_n) {
 		raw_p = raw2int(f->force_major);
 		raw_w = raw2int(f->size_major);
 		raw_x = raw2int(f->abs_x);
@@ -307,12 +311,13 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 		abs_w = int2bound(&c->w, raw_w);
 		abs_x = int2bound(&c->x, raw_x - c->x.devmin);
 		abs_y = int2bound(&c->y, c->y.devmax - raw_y);
-		for (; f != dev->tp_data->finger + fingers; f++) {
+		while (raw_n--) {
 			ptest = int2bound(&c->p, raw2int(f->force_major));
 			if (ptest > PRESSURE_LOW)
 				nmax++;
 			if (ptest > PRESSURE_HIGH)
 				nmin++;
+			f++;
 		}
 	}
 
-- 
GitLab


From 6916d97f6e25cc66a32d6e9a16419067d843b14f Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Mon, 27 Apr 2009 11:52:43 -0700
Subject: [PATCH 0982/1421] Input: bcm5974 - add quad-finger tapping

The integrated button on the new unibody Macbooks presents a need to
report explicit four-finger actions. Evidently, the finger pressing
the button is also touching the trackpad, so in order to fully support
three-finger actions, the driver must be able to report four-finger
actions. This patch adds a new button, BTN_TOOL_QUADTAP, which
achieves this.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 4 +++-
 include/linux/input.h         | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index bda873393b0..2ddf05e1d85 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -258,6 +258,7 @@ static void setup_events_to_report(struct input_dev *input_dev,
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+	__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
 	__set_bit(BTN_LEFT, input_dev->keybit);
 }
 
@@ -329,7 +330,8 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	input_report_key(input, BTN_TOUCH, dev->fingers > 0);
 	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
 	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
-	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3);
+	input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3);
 
 	input_report_abs(input, ABS_PRESSURE, abs_p);
 	input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
diff --git a/include/linux/input.h b/include/linux/input.h
index 6b28048fc56..32cb825939b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -445,6 +445,7 @@ struct input_absinfo {
 #define BTN_STYLUS2		0x14c
 #define BTN_TOOL_DOUBLETAP	0x14d
 #define BTN_TOOL_TRIPLETAP	0x14e
+#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
 
 #define BTN_WHEEL		0x150
 #define BTN_GEAR_DOWN		0x150
-- 
GitLab


From 158e928741e58eb4aa379da422290c10fef23f00 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 28 Apr 2009 07:03:54 -0700
Subject: [PATCH 0983/1421] Input: bcm5974 - Add support for the Macbook 5
 (Unibody)

This patch adds support for the new unibody Macbook, with physically
integrated button and trackpad. Since the integrated button changes
the logic for touch-and-click, a device capability bit mask is now
reported in input_id.version, which can be picked up by user space
via a EVIOCGID call.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: David M. Lary <dmlary@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 45 +++++++++++++++++++++++++++++++++--
 1 file changed, 43 insertions(+), 2 deletions(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2ddf05e1d85..f2b38261eac 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -51,6 +51,10 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI	0x0230
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO	0x0231
 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS	0x0232
+/* Macbook5,1 (unibody), aka wellspring3 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI	0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO	0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS	0x0238
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = {
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+	/* Macbook5,1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -98,11 +106,19 @@ struct bt_data {
 
 /* trackpad header types */
 enum tp_type {
-	TYPE1			/* plain trackpad */
+	TYPE1,			/* plain trackpad */
+	TYPE2			/* button integrated in trackpad */
 };
 
 /* trackpad finger data offsets, le16-aligned */
 #define FINGER_TYPE1		(13 * sizeof(__le16))
+#define FINGER_TYPE2		(15 * sizeof(__le16))
+
+/* trackpad button data offsets */
+#define BUTTON_TYPE2		15
+
+/* list of device capability bits */
+#define HAS_INTEGRATED_BUTTON	1
 
 /* trackpad finger structure, le16-aligned */
 struct tp_finger {
@@ -135,6 +151,7 @@ struct bcm5974_param {
 /* device-specific configuration */
 struct bcm5974_config {
 	int ansi, iso, jis;	/* the product id of this device */
+	int caps;		/* device capability bitmask */
 	int bt_ep;		/* the endpoint of the button interface */
 	int bt_datalen;		/* data length of the button interface */
 	int tp_ep;		/* the endpoint of the trackpad interface */
@@ -184,6 +201,7 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
 		USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
 		USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+		0,
 		0x84, sizeof(struct bt_data),
 		0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
@@ -195,6 +213,7 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
 		USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
 		USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+		0,
 		0x84, sizeof(struct bt_data),
 		0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
 		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
@@ -202,6 +221,18 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
 		{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
+		{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
+	},
 	{}
 };
 
@@ -281,7 +312,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	const struct tp_finger *f;
 	struct input_dev *input = dev->input;
 	int raw_p, raw_w, raw_x, raw_y, raw_n;
-	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+	int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0;
 	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
 	if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
@@ -304,6 +335,10 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 
 		ptest = int2bound(&c->p, raw_p);
 		origin = raw2int(f->origin);
+
+		/* set the integrated button if applicable */
+		if (c->tp_type == TYPE2)
+			ibt = raw2int(dev->tp_data[BUTTON_TYPE2]);
 	}
 
 	/* while tracking finger still valid, count all fingers */
@@ -347,6 +382,10 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 
 	}
 
+	/* type 2 reports button events via ibt only */
+	if (c->tp_type == TYPE2)
+		input_report_key(input, BTN_LEFT, ibt);
+
 	input_sync(input);
 
 	return 0;
@@ -656,6 +695,8 @@ static int bcm5974_probe(struct usb_interface *iface,
 	input_dev->name = "bcm5974";
 	input_dev->phys = dev->phys;
 	usb_to_input_id(dev->udev, &input_dev->id);
+	/* report driver capabilities via the version field */
+	input_dev->id.version = cfg->caps;
 	input_dev->dev.parent = &iface->dev;
 
 	input_set_drvdata(input_dev, dev);
-- 
GitLab


From 5340219317a3370a4b76a2b6f31b1e5a3dbc648b Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 28 Apr 2009 07:04:42 -0700
Subject: [PATCH 0984/1421] Input: bcm5974 - augment debug information

Add more button and finger data to the debug output.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index f2b38261eac..2d8fc0bf692 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -299,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size)
 	if (size != sizeof(struct bt_data))
 		return -EIO;
 
+	dprintk(7,
+		"bcm5974: button data: %x %x %x %x\n",
+		dev->bt_data->unknown1, dev->bt_data->button,
+		dev->bt_data->rel_x, dev->bt_data->rel_y);
+
 	input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
 	input_sync(dev->input);
 
@@ -330,8 +335,9 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 		raw_y = raw2int(f->abs_y);
 
 		dprintk(9,
-			"bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
-			raw_p, raw_w, raw_x, raw_y);
+			"bcm5974: "
+			"raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+			raw_p, raw_w, raw_x, raw_y, raw_n);
 
 		ptest = int2bound(&c->p, raw_p);
 		origin = raw2int(f->origin);
@@ -377,8 +383,8 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 
 		dprintk(8,
 			"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
-			"nmin: %d nmax: %d n: %d\n",
-			abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+			"nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+			abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
 
 	}
 
-- 
GitLab


From 4c57e379f4e318847dd06f60c7e1ff4d8bde1bdb Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 28 Apr 2009 07:07:07 -0700
Subject: [PATCH 0985/1421] Input: bcm5974 - add documentation for the driver

This patch adds documentation for the bcm5974 to Documentation/input/.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 Documentation/input/bcm5974.txt | 65 +++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/input/bcm5974.txt

diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt
new file mode 100644
index 00000000000..5e22dcf6d48
--- /dev/null
+++ b/Documentation/input/bcm5974.txt
@@ -0,0 +1,65 @@
+BCM5974 Driver (bcm5974)
+------------------------
+	Copyright (C) 2008-2009	Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+	Copyright (C) 2008	Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+	Copyright (C) 2001-2004	Greg Kroah-Hartman (greg@kroah.com)
+	Copyright (C) 2005	Johannes Berg (johannes@sipsolutions.net)
+	Copyright (C) 2005	Stelian Pop (stelian@popies.net)
+	Copyright (C) 2005	Frank Arnold (frank@scirocco-5v-turbo.de)
+	Copyright (C) 2005	Peter Osterlund (petero2@telia.com)
+	Copyright (C) 2005	Michael Hanselmann (linux-kernel@hansmi.ch)
+	Copyright (C) 2006	Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/
-- 
GitLab


From 61994a61bcedf328cb1d6e96c393fc91ce64563d Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 28 Apr 2009 07:45:31 -0700
Subject: [PATCH 0986/1421] Input: allow certain EV_ABS events to bypass all
 filtering

With the upcoming multi-touch interface as an example, there is
a need to make certain that all reported events actually get passed
to the event handler. This patch equips the input core with the
ability to bypass all filtering for certain EV_ABS events.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 935a1835de2..8ff92aa13a0 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -29,6 +29,14 @@ MODULE_LICENSE("GPL");
 
 #define INPUT_DEVICES	256
 
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+	0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
 static LIST_HEAD(input_dev_list);
 static LIST_HEAD(input_handler_list);
 
@@ -192,6 +200,11 @@ static void input_handle_event(struct input_dev *dev,
 	case EV_ABS:
 		if (is_event_supported(code, dev->absbit, ABS_MAX)) {
 
+			if (test_bit(code, input_abs_bypass)) {
+				disposition = INPUT_PASS_TO_HANDLERS;
+				break;
+			}
+
 			value = input_defuzz_abs_event(value,
 					dev->abs[code], dev->absfuzz[code]);
 
@@ -1634,10 +1647,20 @@ static const struct file_operations input_fops = {
 	.open = input_open_file,
 };
 
+static void __init input_init_abs_bypass(void)
+{
+	const unsigned int *p;
+
+	for (p = input_abs_bypass_init_data; *p; p++)
+		input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
 static int __init input_init(void)
 {
 	int err;
 
+	input_init_abs_bypass();
+
 	err = class_register(&input_class);
 	if (err) {
 		printk(KERN_ERR "input: unable to register input_dev class\n");
-- 
GitLab


From 5e5ee686e3c0f8a3cbe9b75c2690326bf91af10d Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 28 Apr 2009 07:47:33 -0700
Subject: [PATCH 0987/1421] Input: add detailed multi-touch finger data report
 protocol

In order to utilize the full power of the new multi-touch devices, a
way to report detailed finger data to user space is needed. This patch
adds a multi-touch (MT) protocol which allows drivers to report details
for an arbitrary number of fingers.

The driver sends a SYN_MT_REPORT event via the input_mt_sync() function
when a complete finger has been reported.

In order to stay compatible with existing applications, the data
reported in a finger packet must not be recognized as single-touch
events. In addition, all finger data must bypass input filtering,
since subsequent events of the same type refer to different fingers.

A set of ABS_MT events with the desired properties are defined. The
events are divided into categories, to allow for partial implementation.
The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.
If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide
the size of the approaching finger. Anisotropy and direction may be
specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and
ABS_MT_ORIENTATION. Devices with more granular information may specify
general shapes as blobs, i.e., as a sequence of rectangular shapes
grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE
may be used to specify whether the touching tool is a finger or a pen.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 13 +++++++++++++
 include/linux/input.h | 23 +++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 8ff92aa13a0..e54e002665b 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -33,6 +33,15 @@ MODULE_LICENSE("GPL");
  * EV_ABS events which should not be cached are listed here.
  */
 static unsigned int input_abs_bypass_init_data[] __initdata = {
+	ABS_MT_TOUCH_MAJOR,
+	ABS_MT_TOUCH_MINOR,
+	ABS_MT_WIDTH_MAJOR,
+	ABS_MT_WIDTH_MINOR,
+	ABS_MT_ORIENTATION,
+	ABS_MT_POSITION_X,
+	ABS_MT_POSITION_Y,
+	ABS_MT_TOOL_TYPE,
+	ABS_MT_BLOB_ID,
 	0
 };
 static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
@@ -169,6 +178,10 @@ static void input_handle_event(struct input_dev *dev,
 				disposition = INPUT_PASS_TO_HANDLERS;
 			}
 			break;
+		case SYN_MT_REPORT:
+			dev->sync = 0;
+			disposition = INPUT_PASS_TO_HANDLERS;
+			break;
 		}
 		break;
 
diff --git a/include/linux/input.h b/include/linux/input.h
index 32cb825939b..0e6ff5de358 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -106,6 +106,7 @@ struct input_absinfo {
 
 #define SYN_REPORT		0
 #define SYN_CONFIG		1
+#define SYN_MT_REPORT		2
 
 /*
  * Keys and buttons
@@ -645,6 +646,17 @@ struct input_absinfo {
 #define ABS_TOOL_WIDTH		0x1c
 #define ABS_VOLUME		0x20
 #define ABS_MISC		0x28
+
+#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
+#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
+#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
+
 #define ABS_MAX			0x3f
 #define ABS_CNT			(ABS_MAX+1)
 
@@ -743,6 +755,12 @@ struct input_absinfo {
 #define BUS_GSC			0x1A
 #define BUS_ATARI		0x1B
 
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER		0
+#define MT_TOOL_PEN		1
+
 /*
  * Values describing the status of a force-feedback effect
  */
@@ -1312,6 +1330,11 @@ static inline void input_sync(struct input_dev *dev)
 	input_event(dev, EV_SYN, SYN_REPORT, 0);
 }
 
+static inline void input_mt_sync(struct input_dev *dev)
+{
+	input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
 void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
 
 static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
-- 
GitLab


From 999fb23ef868719b8bd55ee3f6b1f7a8fd8016af Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 28 Apr 2009 19:08:10 +0200
Subject: [PATCH 0988/1421] CRISv32: Fix typo compile error in ARTPEC-3 gpio
 driver.

arch/cris/arch-v32/drivers/mach-a3/gpio.c:
+spin_lock_irqrestore(&gpio_lock, flags);
arch/cris/arch-v32/drivers/mach-a3/gpio.c:
+spin_lock_irqrestore(&gpio_lock, flags);

  should that not be "spin_unlock_irqrestore()"?

The code in question was inside an (most often) undefined ifdef.

Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/arch-v32/drivers/mach-a3/gpio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 7a87bc0ae2e..97357cfd17b 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) |
 			(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRBITS:
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) &
 			~(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		/* Set alarm when bits with 1 in arg go high. */
-- 
GitLab


From 9f6532519feab921856f41b30a2397ee25f4de49 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 3 Apr 2009 21:31:30 -0700
Subject: [PATCH 0989/1421] regulator: fix header file missing kernel-doc

Add regulator header file missing kernel-doc:

Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc:	Liam Girdwood <lrg@slimlogic.co.uk>
cc:	Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 include/linux/regulator/driver.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 4848d8dacd9..225f733e753 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -50,6 +50,7 @@ enum regulator_status {
  * @set_current_limit: Configure a limit for a current-limited regulator.
  * @get_current_limit: Get the configured limit for a current-limited regulator.
  *
+ * @set_mode: Set the configured operating mode for the regulator.
  * @get_mode: Get the configured operating mode for the regulator.
  * @get_status: Return actual (not as-configured) status of regulator, as a
  *	REGULATOR_STATUS value (or negative errno)
-- 
GitLab


From 036de8efae4b81f8e1504fab654070cecce6dfa9 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 8 Apr 2009 13:52:39 +0300
Subject: [PATCH 0990/1421] unreachable code in drms_uA_update()

I removed the extra semi-colon and indented the return statement.

The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git).
The patch was compile tested.

regards,
dan carpenter

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 01f7702a805..47fc6e6fe9b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -540,8 +540,8 @@ static void drms_uA_update(struct regulator_dev *rdev)
 
 	err = regulator_check_drms(rdev);
 	if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
-	    !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
-	return;
+	    !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
+		return;
 
 	/* get output voltage */
 	output_uV = rdev->desc->ops->get_voltage(rdev);
-- 
GitLab


From cd78dfc6c6e321a310a73ef7b0df3d262704dd55 Mon Sep 17 00:00:00 2001
From: Diego Liziero <diegoliz@gmail.com>
Date: Tue, 14 Apr 2009 03:04:47 +0200
Subject: [PATCH 0991/1421] drivers/regulator: fix when type is different from
 REGULATOR_VOLTAGE or REGULATOR_CURRENT

When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
the if should probably return ERR_PTR(-EINVAL)

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

@@ expression E; constant C; @@
(
- !E == C
+ E != C
)

Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 47fc6e6fe9b..cb62be63cae 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2001,8 +2001,8 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
 		return ERR_PTR(-EINVAL);
 
-	if (!regulator_desc->type == REGULATOR_VOLTAGE &&
-	    !regulator_desc->type == REGULATOR_CURRENT)
+	if (regulator_desc->type != REGULATOR_VOLTAGE &&
+	    regulator_desc->type != REGULATOR_CURRENT)
 		return ERR_PTR(-EINVAL);
 
 	if (!init_data)
-- 
GitLab


From 53032dafc6b93ac178ca2340ff8eb4ee2b3d1a92 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Sat, 25 Apr 2009 05:28:36 -0600
Subject: [PATCH 0992/1421] regulator core: fix double-free in
 regulator_register() error path

During regulator registration, any error after device_register() will
cause a double-free on the struct regulator_dev 'rdev'.  The bug is in
drivers/regulator/core.c:regulator_register():

...
scrub:
	device_unregister(&rdev->dev);
clean:
	kfree(rdev);                           <---
	rdev = ERR_PTR(ret);
	goto out;
...

device_unregister() calls regulator_dev_release() which frees rdev.  The
subsequent kfree corrupts memory and causes some OMAP3 systems to oops on
boot in regulator_get().

Applies against 2.6.30-rc3.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index cb62be63cae..2f14c16f58c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2080,6 +2080,10 @@ out:
 
 scrub:
 	device_unregister(&rdev->dev);
+	/* device core frees rdev */
+	rdev = ERR_PTR(ret);
+	goto out;
+
 clean:
 	kfree(rdev);
 	rdev = ERR_PTR(ret);
-- 
GitLab


From aa61d558f0f9f8b303b9cab1e51e9886896ba1a3 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Sun, 26 Apr 2009 11:49:30 +0300
Subject: [PATCH 0993/1421] regulator/virtual: fix strings compare predicates

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/virtual.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index 3d08348584e..71403fa3ffa 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -230,13 +230,13 @@ static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
 	 * sysfs_streq() doesn't need the \n's, but we add them so the strings
 	 * will be shared with show_mode(), above.
 	 */
-	if (sysfs_streq(buf, "fast\n") == 0)
+	if (sysfs_streq(buf, "fast\n"))
 		mode = REGULATOR_MODE_FAST;
-	else if (sysfs_streq(buf, "normal\n") == 0)
+	else if (sysfs_streq(buf, "normal\n"))
 		mode = REGULATOR_MODE_NORMAL;
-	else if (sysfs_streq(buf, "idle\n") == 0)
+	else if (sysfs_streq(buf, "idle\n"))
 		mode = REGULATOR_MODE_IDLE;
-	else if (sysfs_streq(buf, "standby\n") == 0)
+	else if (sysfs_streq(buf, "standby\n"))
 		mode = REGULATOR_MODE_STANDBY;
 	else {
 		dev_err(dev, "Configuring invalid mode\n");
-- 
GitLab


From 030853b7abdd6effb9cb44f29e60d1d7a9592210 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Tue, 28 Apr 2009 13:34:14 +0200
Subject: [PATCH 0994/1421] regulator/bq24022: fix bug in is_enabled function

This seems to be fallout from last October's regulator core rework.
It got noticed only because of recent regulator framework changes.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/bq24022.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
index 7ecb820ceeb..d08cd9b66c6 100644
--- a/drivers/regulator/bq24022.c
+++ b/drivers/regulator/bq24022.c
@@ -61,8 +61,7 @@ static int bq24022_disable(struct regulator_dev *rdev)
 
 static int bq24022_is_enabled(struct regulator_dev *rdev)
 {
-	struct platform_device *pdev = rdev_get_drvdata(rdev);
-	struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+	struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
 
 	return !gpio_get_value(pdata->gpio_nce);
 }
-- 
GitLab


From 3e59091828ed5406c879b899b4257fcef7271e2c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 28 Apr 2009 11:09:38 +0100
Subject: [PATCH 0995/1421] regulator: Fix default constraints for fixed
 voltage regulators

Default voltage constraints were being provided for fixed voltage
regulator where board constraints were not provided but these constraints
used INT_MIN as the default minimum voltage which is not a valid value
since it is less than zero. Use 1uV instead.

Also set the default values we set in the constraints themselves since
otherwise the max_uV constraint we determine will not be stored in the
actual constraint strucutre and will therefore not be used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2f14c16f58c..98c3a74e994 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -703,10 +703,13 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		int	cmin = constraints->min_uV;
 		int	cmax = constraints->max_uV;
 
-		/* it's safe to autoconfigure fixed-voltage supplies */
+		/* it's safe to autoconfigure fixed-voltage supplies
+		   and the constraints are used by list_voltage. */
 		if (count == 1 && !cmin) {
-			cmin = INT_MIN;
+			cmin = 1;
 			cmax = INT_MAX;
+			constraints->min_uV = cmin;
+			constraints->max_uV = cmax;
 		}
 
 		/* voltage constraints are optional */
-- 
GitLab


From 39f36b47caae1443eb37c34c6def108bb79f8d25 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 28 Apr 2009 12:38:32 +0900
Subject: [PATCH 0996/1421] mg_disk: fix locking

IRQ and timeout handlers call functions which expect locked queue lock
without locking it.  Fix it.

While at it, convert 0s used as null pointer constant to NULLs.

[ Impact: fix locking, cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
---
 drivers/block/mg_disk.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index fb39d9aa3cd..d3e72ad08db 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -160,11 +160,16 @@ static irqreturn_t mg_irq(int irq, void *dev_id)
 	struct mg_host *host = dev_id;
 	void (*handler)(struct mg_host *) = host->mg_do_intr;
 
-	host->mg_do_intr = 0;
+	spin_lock(&host->lock);
+
+	host->mg_do_intr = NULL;
 	del_timer(&host->timer);
 	if (!handler)
 		handler = mg_unexpected_intr;
 	handler(host);
+
+	spin_unlock(&host->lock);
+
 	return IRQ_HANDLED;
 }
 
@@ -319,7 +324,7 @@ static void mg_read(struct request *req)
 
 	remains = req->nr_sectors;
 
-	if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, 0) !=
+	if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) !=
 			MG_ERR_NONE)
 		mg_bad_rw_intr(host);
 
@@ -363,7 +368,7 @@ static void mg_write(struct request *req)
 
 	remains = req->nr_sectors;
 
-	if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, 0) !=
+	if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) !=
 			MG_ERR_NONE) {
 		mg_bad_rw_intr(host);
 		return;
@@ -521,9 +526,11 @@ void mg_times_out(unsigned long data)
 	char *name;
 	struct request *req;
 
+	spin_lock_irq(&host->lock);
+
 	req = elv_next_request(host->breq);
 	if (!req)
-		return;
+		goto out_unlock;
 
 	host->mg_do_intr = NULL;
 
@@ -534,6 +541,8 @@ void mg_times_out(unsigned long data)
 	mg_bad_rw_intr(host);
 
 	mg_request(host->breq);
+out_unlock:
+	spin_unlock_irq(&host->lock);
 }
 
 static void mg_request_poll(struct request_queue *q)
-- 
GitLab


From 0d9f346fb0cd6d6fc70827c5396a0d83939530e4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 28 Apr 2009 12:38:33 +0900
Subject: [PATCH 0997/1421] mg_disk: fix CONFIG_LBD=y warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/block/mg_disk.c: In function ‘mg_dump_status’:
drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but
argument 2 has type ‘sector_t’

[ Impact: kill build warning ]

Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/block/mg_disk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index d3e72ad08db..f3898353d0a 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -79,7 +79,7 @@ static void mg_dump_status(const char *msg, unsigned int stat,
 			if (host->breq) {
 				req = elv_next_request(host->breq);
 				if (req)
-					printk(", sector=%ld", req->sector);
+					printk(", sector=%u", (u32)req->sector);
 			}
 
 		}
-- 
GitLab


From 0191944282e84931f92915b5f06b348a92dac7e1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 28 Apr 2009 12:38:33 +0900
Subject: [PATCH 0998/1421] hd: fix locking

hd dance around local irq and HD_IRQ enable without achieving much.
It ends up transferring data from irq handler with both local irq and
HD_IRQ disabled.  The only place it actually does something is while
transferring the first block of a request which it does with HD_IRQ
disabled but local irq enabled.

Unfortunately, the dancing is horribly broken from locking POV.  IRQ
and timeout handlers access block queue without grabbing the queue
lock and running the driver in SMP configuration crashes the whole
machine pretty quickly.

Remove meaningless irq enable/disable dancing and add proper locking
in issue, irq and timeout paths.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/block/hd.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 3c11f062a18..baaa9e486e5 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -509,7 +509,6 @@ ok_to_write:
 	if (i > 0) {
 		SET_HANDLER(&write_intr);
 		outsw(HD_DATA, req->buffer, 256);
-		local_irq_enable();
 	} else {
 #if (HD_DELAY > 0)
 		last_req = read_timer();
@@ -541,8 +540,7 @@ static void hd_times_out(unsigned long dummy)
 	if (!CURRENT)
 		return;
 
-	disable_irq(HD_IRQ);
-	local_irq_enable();
+	spin_lock_irq(hd_queue->queue_lock);
 	reset = 1;
 	name = CURRENT->rq_disk->disk_name;
 	printk("%s: timeout\n", name);
@@ -552,9 +550,8 @@ static void hd_times_out(unsigned long dummy)
 #endif
 		end_request(CURRENT, 0);
 	}
-	local_irq_disable();
 	hd_request();
-	enable_irq(HD_IRQ);
+	spin_unlock_irq(hd_queue->queue_lock);
 }
 
 static int do_special_op(struct hd_i_struct *disk, struct request *req)
@@ -592,7 +589,6 @@ static void hd_request(void)
 		return;
 repeat:
 	del_timer(&device_timer);
-	local_irq_enable();
 
 	req = CURRENT;
 	if (!req) {
@@ -601,7 +597,6 @@ repeat:
 	}
 
 	if (reset) {
-		local_irq_disable();
 		reset_hd();
 		return;
 	}
@@ -660,9 +655,7 @@ repeat:
 
 static void do_hd_request(struct request_queue *q)
 {
-	disable_irq(HD_IRQ);
 	hd_request();
-	enable_irq(HD_IRQ);
 }
 
 static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
@@ -684,12 +677,16 @@ static irqreturn_t hd_interrupt(int irq, void *dev_id)
 {
 	void (*handler)(void) = do_hd;
 
+	spin_lock(hd_queue->queue_lock);
+
 	do_hd = NULL;
 	del_timer(&device_timer);
 	if (!handler)
 		handler = unexpected_hd_interrupt;
 	handler();
-	local_irq_enable();
+
+	spin_unlock(hd_queue->queue_lock);
+
 	return IRQ_HANDLED;
 }
 
-- 
GitLab


From 69838727bcd819a8fd73a88447801221788b0c6d Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 28 Apr 2009 20:24:29 +0200
Subject: [PATCH 0999/1421] bio: fix memcpy corruption in bio_copy_user_iov()

st driver uses blk_rq_map_user() in order to just build a request out
of page frames. In this case, map_data->offset is a non zero value and
iov[0].iov_base is NULL. We need to increase nr_pages for that.

Cc: stable@kernel.org
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/bio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/bio.c b/fs/bio.c
index 7bbc98f0eda..98711647ece 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -817,6 +817,9 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
 		len += iov[i].iov_len;
 	}
 
+	if (offset)
+		nr_pages++;
+
 	bmd = bio_alloc_map_data(nr_pages, iov_count, gfp_mask);
 	if (!bmd)
 		return ERR_PTR(-ENOMEM);
-- 
GitLab


From 13beadd91f148933f47947a88ab2c97a1ca9768d Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@MIT.EDU>
Date: Tue, 28 Apr 2009 11:47:15 -0400
Subject: [PATCH 1000/1421] powerpc: Revert switch to TEXT_TEXT in linker
 script

Commit edada399 broke the build on 64-bit powerpc because it moved the
__ftr_alt_* sections of a file away from the .text section, causing
link failures due to relative conditional branch targets being too far
away from the branch instructions.  This happens on pretty much all
64-bit powerpc configs.

This change reverts commit edada399 while preserving the update from
the *.refok sections to .ref.text that has happened since.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Requested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 433ae118406..a047a6cfca4 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -54,8 +54,8 @@ SECTIONS
 		ALIGN_FUNCTION();
 		HEAD_TEXT
 		_text = .;
-		TEXT_TEXT
-		*(.fixup __ftr_alt_*)
+		/* careful! __ftr_alt_* sections need to be close to .text */
+		*(.text .fixup __ftr_alt_* .ref.text)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
-- 
GitLab


From 16752e2ead535c0e616c64d3fee8401ebd0c9f62 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 28 Apr 2009 21:20:11 +0200
Subject: [PATCH 1001/1421] m68k: arch/m68k/kernel/sun3-head.S needs
 <linux/init.h>

Fix this:

  arch/m68k/kernel/sun3-head.S: Assembler messages:
  arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored

Introduced by commit 6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k:
convert to use __HEAD and HEAD_TEXT macros."), which started using
__HEAD without adding the appropriate include.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/kernel/sun3-head.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S
index 9e5c3e57c59..43036bf4aee 100644
--- a/arch/m68k/kernel/sun3-head.S
+++ b/arch/m68k/kernel/sun3-head.S
@@ -1,4 +1,5 @@
 #include <linux/linkage.h>
+#include <linux/init.h>
 
 #include <asm/entry.h>
 #include <asm/page.h>
-- 
GitLab


From 3f33b0aaac4e208579fe5aa2964857d4e9ba10c5 Mon Sep 17 00:00:00 2001
From: "Steven A. Falco" <sfalco@harris.com>
Date: Mon, 27 Apr 2009 17:10:10 -0400
Subject: [PATCH 1002/1421] mtd: Bug in m25p80.c during whole-chip erase

There is a logic error in "whole chip erase" for the m25p80 family.  If
the whole device is successfully erased, erase_chip() will return 0, and
the code will fall through to the "else" clause, and do sector-by-sector
erase in addition to the whole-chip erase.  This patch corrects that.

Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected
to a 400 MHz powerpc.  Increasing it allows me to successfully program
the device on my board.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/m25p80.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 8185b1f3e5e..dfadef84c05 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
 #define	SR_SRWD			0x80	/* SR write protect */
 
 /* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_COUNT	100000
+#define	MAX_READY_WAIT_COUNT	1000000
 #define	CMD_SIZE		4
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
@@ -246,10 +246,12 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 	mutex_lock(&flash->lock);
 
 	/* whole-chip erase? */
-	if (len == flash->mtd.size && erase_chip(flash)) {
-		instr->state = MTD_ERASE_FAILED;
-		mutex_unlock(&flash->lock);
-		return -EIO;
+	if (len == flash->mtd.size) {
+		if (erase_chip(flash)) {
+			instr->state = MTD_ERASE_FAILED;
+			mutex_unlock(&flash->lock);
+			return -EIO;
+		}
 
 	/* REVISIT in some cases we could speed up erasing large regions
 	 * by using OPCODE_SE instead of OPCODE_BE_4K.  We may have set up
-- 
GitLab


From 7267fa6819467669f5cc2ba81a615dcc88158b4b Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 29 Apr 2009 00:16:21 -0400
Subject: [PATCH 1003/1421] tracing: fix ref count in splice pages

The pages allocated for the splice binary buffer did not initialize
the ref count correctly. This caused pages not to be freed and causes
a drastic memory leak.

Thanks to logdev I was able to trace the tracer to find where the leak
was.

[ Impact: stop memory leak when using splice ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 1ce5dc6372b..a884c09006c 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3448,6 +3448,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos,
 		if (!ref)
 			break;
 
+		ref->ref = 1;
 		ref->buffer = info->tr->buffer;
 		ref->page = ring_buffer_alloc_read_page(ref->buffer);
 		if (!ref->page) {
-- 
GitLab


From 33015c85995716d03f6293346cf05a1908b0fb9a Mon Sep 17 00:00:00 2001
From: Stuart Bennett <stuart@freedesktop.org>
Date: Tue, 28 Apr 2009 20:17:48 +0100
Subject: [PATCH 1004/1421] tracing: x86, mmiotrace: fix range test

Matching on (addr == (p->addr + p->len)) causes problems when mappings
are adjacent.

[ Impact: fix mmiotrace confusion on adjacent iomaps ]

Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1240946271-7083-2-git-send-email-stuart@freedesktop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/kmmio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 4f115e00486..50dc802a1c4 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr)
 {
 	struct kmmio_probe *p;
 	list_for_each_entry_rcu(p, &kmmio_probes, list) {
-		if (addr >= p->addr && addr <= (p->addr + p->len))
+		if (addr >= p->addr && addr < (p->addr + p->len))
 			return p;
 	}
 	return NULL;
-- 
GitLab


From 2feaace40e5c3133fea795333402f30929a200d9 Mon Sep 17 00:00:00 2001
From: Ulrich Dangel <uli@spamt.net>
Date: Tue, 28 Apr 2009 16:23:51 +0200
Subject: [PATCH 1005/1421] HID: Fix the support for apple mini aluminium
 keyboard

Quirks for the apple mini keyboard was recently added but keyboard
was recognized as a powerbook keyboard. Adjusted boundary to the lowest
product id for the apple mini keyboard to get the right translation.

Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-apple.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 7359d9d88e4..acbce5745b0 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -151,7 +151,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 	if (fnmode) {
 		int do_translate;
 
-		trans = apple_find_translation((hid->product < 0x220 ||
+		trans = apple_find_translation((hid->product < 0x21d ||
 					hid->product >= 0x300) ?
 					powerbook_fn_keys : apple_fn_keys,
 					usage->code);
-- 
GitLab


From f5f293a4e3d0a0c52cec31de6762c95050156516 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <dada1@cosmosbay.com>
Date: Wed, 29 Apr 2009 14:44:49 +0200
Subject: [PATCH 1006/1421] sched: account system time properly

Andrew Gallatin reported that IRQ and SOFTIRQ times were
sometime not reported correctly on recent kernels, and even
bisected to commit 457533a7d3402d1d91fbc125c8bd1bd16dcd3cd4
([PATCH] fix scaled & unscaled cputime accounting) as the first
bad commit.

Further analysis pointed that commit
79741dd35713ff4f6fd0eafd59fa94e8a4ba922d ([PATCH] idle cputime
accounting) was the real cause of the problem.

account_process_tick() was not taking into account timer IRQ
interrupting the idle task servicing a hard or soft irq.

On mostly idle cpu, irqs were thus not accounted and top or
mpstat could tell user/admin that cpu was 100 % idle, 0.00 %
irq, 0.00 % softirq, while it was not.

[ Impact: fix occasionally incorrect CPU statistics in top/mpstat ]

Reported-by: Andrew Gallatin <gallatin@myri.com>
Re-reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: rick.jones2@hp.com
Cc: brice@myri.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <49F84BC1.7080602@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index b902e587a3a..26efa475bdc 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4732,7 +4732,7 @@ void account_process_tick(struct task_struct *p, int user_tick)
 
 	if (user_tick)
 		account_user_time(p, one_jiffy, one_jiffy_scaled);
-	else if (p != rq->idle)
+	else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
 		account_system_time(p, HARDIRQ_OFFSET, one_jiffy,
 				    one_jiffy_scaled);
 	else
-- 
GitLab


From 89092ddd7aca598e3b8874f7a49216e7917d8f3f Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Wed, 29 Apr 2009 17:12:12 +0200
Subject: [PATCH 1007/1421] HID: fix possible deadlock in usbhid_close()

This patch switches usbhid_close() from flush_scheduled_work() to canceling
the outstanding work. This fixes a possible deadlock due to work taking
the mutex usbhid_close() holds. Lockdep reported the problem.

Signed-off-by: Oliver Neukum <oliver@neukum.org>

--
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 4306cb1b8ce..900ce18dd54 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -662,8 +662,8 @@ void usbhid_close(struct hid_device *hid)
 	spin_lock_irq(&usbhid->lock);
 	if (!--hid->open) {
 		spin_unlock_irq(&usbhid->lock);
+		hid_cancel_delayed_stuff(usbhid);
 		usb_kill_urb(usbhid->urbin);
-		flush_scheduled_work();
 		usbhid->intf->needs_remote_wakeup = 0;
 	} else {
 		spin_unlock_irq(&usbhid->lock);
-- 
GitLab


From 7e31a966ad270ba32a77c157c015cd7c82faaa55 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Wed, 29 Apr 2009 01:20:55 +0800
Subject: [PATCH 1008/1421] ocfs2/trivial: Remove unused variable in
 ocfs2_rename.

With indexed dir enabled, now we use ocfs2_dir_lookup_result to
wrap all the bh used for dir. So remove the 2 unused variables.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/namei.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 2220f93f668..33464c6b60a 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -1025,10 +1025,8 @@ static int ocfs2_rename(struct inode *old_dir,
 	struct inode *orphan_dir = NULL;
 	struct ocfs2_dinode *newfe = NULL;
 	char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
-	struct buffer_head *orphan_entry_bh = NULL;
 	struct buffer_head *newfe_bh = NULL;
 	struct buffer_head *old_inode_bh = NULL;
-	struct buffer_head *insert_entry_bh = NULL;
 	struct ocfs2_super *osb = NULL;
 	u64 newfe_blkno, old_de_ino;
 	handle_t *handle = NULL;
@@ -1455,8 +1453,6 @@ bail:
 	brelse(old_inode_bh);
 	brelse(old_dir_bh);
 	brelse(new_dir_bh);
-	brelse(orphan_entry_bh);
-	brelse(insert_entry_bh);
 
 	mlog_exit(status);
 
-- 
GitLab


From 92ab9baee3e075e4d84d9b74f6da5b047539e323 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@radix.net>
Date: Mon, 13 Apr 2009 21:43:31 -0300
Subject: [PATCH 1009/1421] V4L/DVB (11494): cx18: Send correct input routing
 value to external audio multiplexers

A late v4l2_subdev framework change accidentally sent the audio input
routing value to the external multiplexer, instead of the muxer input routing
value to the external multiplexer.  This change corrects that error.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-audio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c
index 1519e91c677..7a8ad5963de 100644
--- a/drivers/media/video/cx18/cx18-audio.c
+++ b/drivers/media/video/cx18/cx18-audio.c
@@ -44,7 +44,7 @@ int cx18_audio_set_io(struct cx18 *cx)
 
 	/* handle muxer chips */
 	v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
-			in->audio_input, 0, 0);
+			 (u32) in->muxer_input, 0, 0);
 
 	err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
 			       audio, s_routing, in->audio_input, 0, 0);
-- 
GitLab


From 3964b58a25fdca066011600bf58b38d00e9ae28d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 14 Apr 2009 13:56:58 -0300
Subject: [PATCH 1010/1421] V4L/DVB (11494a): cx231xx Kconfig fixes

selecting ALSA module breaks if !SND. Just remove select.

While here, let's fix the whitespacing at the Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/Kconfig | 44 ++++++++++++++---------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index 91156546a07..477d4ab5e9a 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -1,12 +1,11 @@
 config VIDEO_CX231XX
-       tristate "Conexant cx231xx USB video capture support"
-       depends on VIDEO_DEV && I2C && INPUT
-       select VIDEO_TUNER
-       select VIDEO_TVEEPROM
-       select VIDEO_IR
-       select VIDEOBUF_VMALLOC
-       select VIDEO_CX25840
-       select VIDEO_CX231XX_ALSA
+	tristate "Conexant cx231xx USB video capture support"
+	depends on VIDEO_DEV && I2C && INPUT
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_IR
+	select VIDEOBUF_VMALLOC
+	select VIDEO_CX25840
 
 	---help---
 	  This is a video4linux driver for Conexant 231xx USB based TV cards.
@@ -15,21 +14,22 @@ config VIDEO_CX231XX
 	  module will be called cx231xx
 
 config VIDEO_CX231XX_ALSA
-    tristate "Conexant Cx231xx ALSA audio module"
-       depends on VIDEO_CX231XX && SND
-       select SND_PCM
+	tristate "Conexant Cx231xx ALSA audio module"
+	depends on VIDEO_CX231XX && SND
+	select SND_PCM
 
-       ---help---
-	 This is an ALSA driver for Cx231xx USB based TV cards.
+	---help---
+	  This is an ALSA driver for Cx231xx USB based TV cards.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called cx231xx-alsa
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx231xx-alsa
 
 config VIDEO_CX231XX_DVB
-       tristate "DVB/ATSC Support for Cx231xx based TV cards"
-       depends on VIDEO_CX231XX && DVB_CORE
-       select VIDEOBUF_DVB
-       select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
-       ---help---
-	 This adds support for DVB cards based on the
-	 Conexant cx231xx chips.
+	tristate "DVB/ATSC Support for Cx231xx based TV cards"
+	depends on VIDEO_CX231XX && DVB_CORE
+	select VIDEOBUF_DVB
+	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+
+	---help---
+	  This adds support for DVB cards based on the
+	  Conexant cx231xx chips.
-- 
GitLab


From 5b83cfa98569663b6fa6cda85a1f2fd371a082c7 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 14 Apr 2009 19:50:33 -0300
Subject: [PATCH 1011/1421] V4L/DVB (11515): drivers/media/video/saa5249.c: fix
 use-after-free and leak

I moved the kfree() down a couple lines.  t->vdev is going to be in freed
memory so there is no point setting it to NULL.  I added a kfree(t) on a

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa5249.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 48b27fe4808..271d6e931b7 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -598,6 +598,7 @@ static int saa5249_probe(struct i2c_client *client,
 	/* Now create a video4linux device */
 	t->vdev = video_device_alloc();
 	if (t->vdev == NULL) {
+		kfree(t);
 		kfree(client);
 		return -ENOMEM;
 	}
@@ -617,9 +618,8 @@ static int saa5249_probe(struct i2c_client *client,
 	/* Register it */
 	err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
 	if (err < 0) {
-		kfree(t);
 		video_device_release(t->vdev);
-		t->vdev = NULL;
+		kfree(t);
 		return err;
 	}
 	return 0;
-- 
GitLab


From 9401608bb34be14960311dbb91d4a82ee07a03fa Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 14 Apr 2009 19:51:30 -0300
Subject: [PATCH 1012/1421] V4L/DVB (11516): drivers/media/video/saa5246a.c:
 fix use-after-free

I lowered the kfree(t) down a couple lines and removed the superflous
"t->vdev = NULL;"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa5246a.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index da47b2f0528..155804b061e 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -1092,9 +1092,8 @@ static int saa5246a_probe(struct i2c_client *client,
 	/* Register it */
 	err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
 	if (err < 0) {
-		kfree(t);
 		video_device_release(t->vdev);
-		t->vdev = NULL;
+		kfree(t);
 		return err;
 	}
 	return 0;
-- 
GitLab


From a357482a1e8fdd39f0a58c33ed2ffd0f1becb825 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 21 Apr 2009 04:22:38 -0300
Subject: [PATCH 1013/1421] V4L/DVB (11561a): move media after i2c

Currently drivers/media drivers are linked very early - directly after
base, block, misc, and mfd and before ata, scsi, ide, input, firewire,
usb, and i2c. This breaks static build of video4linux drivers, that use
generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because
during video4linux probing the v4l2-subdev core requires a struct
i2c_adapter context, which cannot be satisfied before the i2c subsystem is
initialised. Moving drivers/media after drivers/i2c fixes this problem.

The best way to trigger action is by submitting a patch:-) So, let's see
what comes out of it - on the one hand I don't see any reason why media
has to be linked this early, and nobody was able to give me one yesterday
as this problem has been discussed on linux-media, OTOH, maybe indeed it
would be better to move i2c the whole way up above media, but that'd be
much bigger of a change, I think.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index 2618a6169a1..1266ead6ace 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_FB_INTEL)          += video/intelfb/
 
 obj-y				+= serial/
 obj-$(CONFIG_PARPORT)		+= parport/
-obj-y				+= base/ block/ misc/ mfd/ media/
+obj-y				+= base/ block/ misc/ mfd/
 obj-$(CONFIG_NUBUS)		+= nubus/
 obj-y				+= macintosh/
 obj-$(CONFIG_IDE)		+= ide/
@@ -71,7 +71,7 @@ obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_I2O)		+= message/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
-obj-y				+= i2c/
+obj-y				+= i2c/ media/
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
-- 
GitLab


From 272aa3966b3244e576c5c07bfff77ea320b89317 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 17 Apr 2009 10:56:51 -0300
Subject: [PATCH 1014/1421] V4L/DVB (11568): cx18: Fix the handling of i2c bus
 registration error

* Return actual error values as returned by the i2c subsystem, rather
  than 0 or 1.
* If the registration of the second bus fails, unregister the first one
  before exiting, otherwise we are leaking resources.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-i2c.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index b9b7064a2be..8591e4fc359 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -211,7 +211,7 @@ static struct i2c_algo_bit_data cx18_i2c_algo_template = {
 /* init + register i2c algo-bit adapter */
 int init_cx18_i2c(struct cx18 *cx)
 {
-	int i;
+	int i, err;
 	CX18_DEBUG_I2C("i2c init\n");
 
 	for (i = 0; i < 2; i++) {
@@ -268,8 +268,18 @@ int init_cx18_i2c(struct cx18 *cx)
 	cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
 		     core, reset, (u32) CX18_GPIO_RESET_I2C);
 
-	return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
-		i2c_bit_add_bus(&cx->i2c_adap[1]);
+	err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+	if (err)
+		goto err;
+	err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+	if (err)
+		goto err_del_bus_0;
+	return 0;
+
+ err_del_bus_0:
+	i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+	return err;
 }
 
 void exit_cx18_i2c(struct cx18 *cx)
-- 
GitLab


From 9d63cec16829ac3600c5014d207a659df3b93c9a Mon Sep 17 00:00:00 2001
From: Dean Anderson <dean@sensoray.com>
Date: Mon, 20 Apr 2009 19:07:44 -0300
Subject: [PATCH 1015/1421] V4L/DVB (11570): patch: s2255drv: fix race
 condition on set mode

set_modeready flag must be set before command sent to USB in
s2255_write_config.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s2255drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 5202cadb2aa..30f4698be90 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -1237,6 +1237,7 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
 	buffer[1] = (u32) chn_rev;
 	buffer[2] = CMD_SET_MODE;
 	memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
+	dev->setmode_ready[chn] = 0;
 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 	if (debug)
 		dump_verify_mode(dev, mode);
@@ -1245,7 +1246,6 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
 
 	/* wait at least 3 frames before continuing */
 	if (mode->restart) {
-		dev->setmode_ready[chn] = 0;
 		wait_event_timeout(dev->wait_setmode[chn],
 				   (dev->setmode_ready[chn] != 0),
 				   msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
-- 
GitLab


From e39c9047975f4302354c16c33eecfe59946d3fc4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 24 Apr 2009 12:58:24 -0300
Subject: [PATCH 1016/1421] V4L/DVB (11612): mx3_camera: Fix compilation with
 CONFIG_PM

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx3_camera.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c462b811e99..2d0781118eb 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -1063,10 +1063,6 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= mx3_camera_add_device,
 	.remove		= mx3_camera_remove_device,
-#ifdef CONFIG_PM
-	.suspend	= mx3_camera_suspend,
-	.resume		= mx3_camera_resume,
-#endif
 	.set_crop	= mx3_camera_set_crop,
 	.set_fmt	= mx3_camera_set_fmt,
 	.try_fmt	= mx3_camera_try_fmt,
-- 
GitLab


From d4dc673da9a94716ca2410306c1b36b5faf6c4cc Mon Sep 17 00:00:00 2001
From: Christopher Pascoe <linuxdvb@itee.uq.edu.au>
Date: Mon, 27 Apr 2009 11:27:04 -0300
Subject: [PATCH 1017/1421] V4L/DVB (11626): cx23885: Two fixes for DViCO
 FusionHDTV DVB-T Dual Express

Two fixes for DViCO FusionHDTV DVB-T Dual Express:

 * Reset correct tuner when reinitializing xc3028.
 * Disable the I2C gate control to avoid locking up the I2C bus.

Tested-by: John Knops <jknops@australiaonline.net.au>
Reviewed-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au>
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-cards.c | 4 ++--
 drivers/media/video/cx23885/cx23885-dvb.c   | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index a3c0565be1a..6d6293f7d42 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -441,9 +441,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
 		/* Two identical tuners on two different i2c buses,
 		 * we need to reset the correct gpio. */
-		if (port->nr == 0)
+		if (port->nr == 1)
 			bitmask = 0x01;
-		else if (port->nr == 1)
+		else if (port->nr == 2)
 			bitmask = 0x04;
 		break;
 	}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index f48454ab390..0c49a98213c 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -314,6 +314,7 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 	.demod_address = 0x0f,
 	.if2           = 45600,
 	.no_tuner      = 1,
+	.disable_i2c_gate_ctrl = 1,
 };
 
 static struct stv0900_config netup_stv0900_config = {
-- 
GitLab


From fe78a49c8ae009d33d6e2c80d4f7f2634440d523 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@linuxtv.org>
Date: Tue, 28 Apr 2009 13:14:07 -0300
Subject: [PATCH 1018/1421] V4L/DVB (11652): au0828: fix kernel oops regression
 on USB disconnect.

A regression was introduced in hg changeset 33810c734a0d, which resulted in
a kernel panic whenever the device was disconnected from USB.  The call to
4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so
when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a
pointer to the v4l2_device instead of the au0828_dev structure.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828-core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index 4cee0b92eee..a1e4c0d769a 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -192,8 +192,6 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	dev->usbdev = usbdev;
 	dev->boardnr = id->driver_info;
 
-	usb_set_intfdata(interface, dev);
-
 	/* Create the v4l2_device */
 	retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
 	if (retval) {
@@ -222,6 +220,10 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	/* Digital TV */
 	au0828_dvb_register(dev);
 
+	/* Store the pointer to the au0828_dev so it can be accessed in
+	   au0828_usb_disconnect */
+	usb_set_intfdata(interface, dev);
+
 	printk(KERN_INFO "Registered device AU0828 [%s]\n",
 		dev->board.name == NULL ? "Unset" : dev->board.name);
 
-- 
GitLab


From ec6995ddaa3db2c5f028184ed9b74c0c448c4947 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Wed, 29 Apr 2009 15:15:59 -0700
Subject: [PATCH 1019/1421] RDMA/cxgb3: Don't complete flushed send work
 requests twice

When the SQ is flushed, mark the flushed entries as not signaled so
the poll logic doesn't re-insert the CQ entry thinking its an out of
order completion.

The bug can cause the NFS/RDMA server to crash due to processing the
same completed work request twice.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/cxio_hal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 8d71086f5a1..62f9cf2f94e 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -410,6 +410,7 @@ int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
 	ptr = wq->sq_rptr + count;
 	sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
 	while (ptr != wq->sq_wptr) {
+		sqp->signaled = 0;
 		insert_sq_cqe(wq, cq, sqp);
 		ptr++;
 		sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
-- 
GitLab


From 091438dd5668396328a3419abcbc6591159eb8d1 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 29 Apr 2009 21:48:16 -0700
Subject: [PATCH 1020/1421] Linux 2.6.30-rc4

---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 9e5dc8f0ef4..eb38c839926 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc3
-NAME = Temporary Tasmanian Devil
+EXTRAVERSION = -rc4
+NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
-- 
GitLab


From def6b3ba56b637d58126ef67fc19bab57945fcc4 Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lmcilroy@redhat.com>
Date: Thu, 23 Apr 2009 22:18:00 -0400
Subject: [PATCH 1021/1421] xfs_file_last_byte() needs to acquire ilock

We had some systems crash with this stack:

[<a00000010000cb20>] ia64_leave_kernel+0x0/0x280
[<a00000021291ca00>] xfs_bmbt_get_startoff+0x0/0x20 [xfs]
[<a0000002129080b0>] xfs_bmap_last_offset+0x210/0x280 [xfs]
[<a00000021295b010>] xfs_file_last_byte+0x70/0x1a0 [xfs]
[<a00000021295b200>] xfs_itruncate_start+0xc0/0x1a0 [xfs]
[<a0000002129935f0>] xfs_inactive_free_eofblocks+0x290/0x460 [xfs]
[<a000000212998fb0>] xfs_release+0x1b0/0x240 [xfs]
[<a0000002129ad930>] xfs_file_release+0x70/0xa0 [xfs]
[<a000000100162ea0>] __fput+0x1a0/0x420
[<a000000100163160>] fput+0x40/0x60

The problem here is that xfs_file_last_byte() does not acquire the
inode lock and can therefore race with another thread that is modifying
the extext list.  While xfs_bmap_last_offset() is trying to lookup
what was the last extent some extents were merged and the extent list
shrunk so the index we lookup is now beyond the end of the extent list
and potentially in a freed buffer.

Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
---
 fs/xfs/xfs_inode.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index e7ae08d1df4..123b20c8cbf 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1258,8 +1258,10 @@ xfs_file_last_byte(
 	 * necessary.
 	 */
 	if (ip->i_df.if_flags & XFS_IFEXTENTS) {
+		xfs_ilock(ip, XFS_ILOCK_SHARED);
 		error = xfs_bmap_last_offset(NULL, ip, &last_block,
 			XFS_DATA_FORK);
+		xfs_iunlock(ip, XFS_ILOCK_SHARED);
 		if (error) {
 			last_block = 0;
 		}
-- 
GitLab


From b9ec9068d79e039507a247ebc5bc9c0ce53654ce Mon Sep 17 00:00:00 2001
From: Olaf Weber <olaf@sgi.com>
Date: Fri, 17 Apr 2009 16:12:45 -0500
Subject: [PATCH 1022/1421] xfs: add more checks to superblock validation

There had been reports where xfs filesystem was randomly
corrupted with fsfuzzer, and xfs failed to handle it
gracefully. This patch fixes couple of reported problem
by providing additional checks in the superblock
validation routine.

Signed-off-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
---
 fs/xfs/xfs_mount.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index b101990df02..65a99725d0c 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -291,14 +291,17 @@ xfs_mount_validate_sb(
 	    sbp->sb_sectsize > XFS_MAX_SECTORSIZE			||
 	    sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG			||
 	    sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG			||
+	    sbp->sb_sectsize != (1 << sbp->sb_sectlog)			||
 	    sbp->sb_blocksize < XFS_MIN_BLOCKSIZE			||
 	    sbp->sb_blocksize > XFS_MAX_BLOCKSIZE			||
 	    sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG			||
 	    sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG			||
+	    sbp->sb_blocksize != (1 << sbp->sb_blocklog)		||
 	    sbp->sb_inodesize < XFS_DINODE_MIN_SIZE			||
 	    sbp->sb_inodesize > XFS_DINODE_MAX_SIZE			||
 	    sbp->sb_inodelog < XFS_DINODE_MIN_LOG			||
 	    sbp->sb_inodelog > XFS_DINODE_MAX_LOG			||
+	    sbp->sb_inodesize != (1 << sbp->sb_inodelog)		||
 	    (sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog)	||
 	    (sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE)	||
 	    (sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE)	||
-- 
GitLab


From 5f79ed685fc6122018c4b5826e2e5bdb7bc6f109 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Wed, 29 Apr 2009 10:50:48 -0400
Subject: [PATCH 1023/1421] xfs: a couple getbmap cleanups

 - reshuffle various conditionals for data vs attr fork to make the code
   more readable
 - do fine-grainded goto-based error handling
 - exit early from conditionals instead of keeping a long else branch around
 - allow kmem_alloc to fail

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
---
 fs/xfs/xfs_bmap.c | 162 ++++++++++++++++++++++------------------------
 1 file changed, 79 insertions(+), 83 deletions(-)

diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 3a6ed426327..abe42448b1c 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -5880,7 +5880,7 @@ xfs_getbmap(
 	void			*arg)		/* formatter arg */
 {
 	__int64_t		bmvend;		/* last block requested */
-	int			error;		/* return value */
+	int			error = 0;	/* return value */
 	__int64_t		fixlen;		/* length for -1 case */
 	int			i;		/* extent number */
 	int			lock;		/* lock state */
@@ -5899,30 +5899,8 @@ xfs_getbmap(
 
 	mp = ip->i_mount;
 	iflags = bmv->bmv_iflags;
-
 	whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
 
-	/*	If the BMV_IF_NO_DMAPI_READ interface bit specified, do not
-	 *	generate a DMAPI read event.  Otherwise, if the DM_EVENT_READ
-	 *	bit is set for the file, generate a read event in order
-	 *	that the DMAPI application may do its thing before we return
-	 *	the extents.  Usually this means restoring user file data to
-	 *	regions of the file that look like holes.
-	 *
-	 *	The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
-	 *	BMV_IF_NO_DMAPI_READ so that read events are generated.
-	 *	If this were not true, callers of ioctl( XFS_IOC_GETBMAP )
-	 *	could misinterpret holes in a DMAPI file as true holes,
-	 *	when in fact they may represent offline user data.
-	 */
-	if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
-	    whichfork == XFS_DATA_FORK) {
-		error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
-		if (error)
-			return XFS_ERROR(error);
-	}
-
 	if (whichfork == XFS_ATTR_FORK) {
 		if (XFS_IFORK_Q(ip)) {
 			if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS &&
@@ -5936,11 +5914,37 @@ xfs_getbmap(
 					 ip->i_mount);
 			return XFS_ERROR(EFSCORRUPTED);
 		}
-	} else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
-		   ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
-		   ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
-		return XFS_ERROR(EINVAL);
-	if (whichfork == XFS_DATA_FORK) {
+
+		prealloced = 0;
+		fixlen = 1LL << 32;
+	} else {
+		/*
+		 * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
+		 * not generate a DMAPI read event.  Otherwise, if the
+		 * DM_EVENT_READ bit is set for the file, generate a read
+		 * event in order that the DMAPI application may do its thing
+		 * before we return the extents.  Usually this means restoring
+		 * user file data to regions of the file that look like holes.
+		 *
+		 * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
+		 * BMV_IF_NO_DMAPI_READ so that read events are generated.
+		 * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
+		 * could misinterpret holes in a DMAPI file as true holes,
+		 * when in fact they may represent offline user data.
+		 */
+		if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
+		    !(iflags & BMV_IF_NO_DMAPI_READ)) {
+			error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
+					      0, 0, 0, NULL);
+			if (error)
+				return XFS_ERROR(error);
+		}
+
+		if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
+		    ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
+		    ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
+			return XFS_ERROR(EINVAL);
+
 		if (xfs_get_extsz_hint(ip) ||
 		    ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){
 			prealloced = 1;
@@ -5949,42 +5953,34 @@ xfs_getbmap(
 			prealloced = 0;
 			fixlen = ip->i_size;
 		}
-	} else {
-		prealloced = 0;
-		fixlen = 1LL << 32;
 	}
 
 	if (bmv->bmv_length == -1) {
 		fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen));
-		bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset),
-					(__int64_t)0);
-	} else if (bmv->bmv_length < 0)
-		return XFS_ERROR(EINVAL);
-	if (bmv->bmv_length == 0) {
+		bmv->bmv_length =
+			max_t(__int64_t, fixlen - bmv->bmv_offset, 0);
+	} else if (bmv->bmv_length == 0) {
 		bmv->bmv_entries = 0;
 		return 0;
+	} else if (bmv->bmv_length < 0) {
+		return XFS_ERROR(EINVAL);
 	}
+
 	nex = bmv->bmv_count - 1;
 	if (nex <= 0)
 		return XFS_ERROR(EINVAL);
 	bmvend = bmv->bmv_offset + bmv->bmv_length;
 
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
-
-	if (((iflags & BMV_IF_DELALLOC) == 0) &&
-	    (whichfork == XFS_DATA_FORK) &&
-	    (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) {
-		/* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */
-		error = xfs_flush_pages(ip, (xfs_off_t)0,
-					       -1, 0, FI_REMAPF);
-		if (error) {
-			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-		return error;
+	if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) {
+		if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) {
+			error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF);
+			if (error)
+				goto out_unlock_iolock;
 		}
-	}
 
-	ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) ||
-	       ip->i_delayed_blks == 0);
+		ASSERT(ip->i_delayed_blks == 0);
+	}
 
 	lock = xfs_ilock_map_shared(ip);
 
@@ -5995,23 +5991,25 @@ xfs_getbmap(
 	if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
 		nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
 
-	bmapi_flags = xfs_bmapi_aflag(whichfork) |
-			((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
+	bmapi_flags = xfs_bmapi_aflag(whichfork);
+	if (!(iflags & BMV_IF_PREALLOC))
+		bmapi_flags |= XFS_BMAPI_IGSTATE;
 
 	/*
 	 * Allocate enough space to handle "subnex" maps at a time.
 	 */
+	error = ENOMEM;
 	subnex = 16;
-	map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP);
+	map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+	if (!map)
+		goto out_unlock_ilock;
 
 	bmv->bmv_entries = 0;
 
-	if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) {
-		if (((iflags & BMV_IF_DELALLOC) == 0) ||
-		    whichfork == XFS_ATTR_FORK) {
-			error = 0;
-			goto unlock_and_return;
-		}
+	if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 &&
+	    (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) {
+		error = 0;
+		goto out_free_map;
 	}
 
 	nexleft = nex;
@@ -6023,10 +6021,12 @@ xfs_getbmap(
 				  bmapi_flags, NULL, 0, map, &nmap,
 				  NULL, NULL);
 		if (error)
-			goto unlock_and_return;
+			goto out_free_map;
 		ASSERT(nmap <= subnex);
 
 		for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
+			int full = 0;	/* user array is full */
+
 			out.bmv_oflags = 0;
 			if (map[i].br_state == XFS_EXT_UNWRITTEN)
 				out.bmv_oflags |= BMV_OF_PREALLOC;
@@ -6041,36 +6041,32 @@ xfs_getbmap(
 			    whichfork == XFS_ATTR_FORK) {
 				/* came to the end of attribute fork */
 				out.bmv_oflags |= BMV_OF_LAST;
-				goto unlock_and_return;
-			} else {
-				int full = 0;	/* user array is full */
-
-				if (!xfs_getbmapx_fix_eof_hole(ip, &out,
-							prealloced, bmvend,
-							map[i].br_startblock)) {
-					goto unlock_and_return;
-				}
-
-				/* format results & advance arg */
-				error = formatter(&arg, &out, &full);
-				if (error || full)
-					goto unlock_and_return;
-				nexleft--;
-				bmv->bmv_offset =
-					out.bmv_offset + out.bmv_length;
-				bmv->bmv_length = MAX((__int64_t)0,
-					(__int64_t)(bmvend - bmv->bmv_offset));
-				bmv->bmv_entries++;
+				goto out_free_map;
 			}
+
+			if (!xfs_getbmapx_fix_eof_hole(ip, &out, prealloced,
+					bmvend, map[i].br_startblock))
+				goto out_free_map;
+
+			/* format results & advance arg */
+			error = formatter(&arg, &out, &full);
+			if (error || full)
+				goto out_free_map;
+			nexleft--;
+			bmv->bmv_offset =
+				out.bmv_offset + out.bmv_length;
+			bmv->bmv_length =
+				max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
+			bmv->bmv_entries++;
 		}
 	} while (nmap && nexleft && bmv->bmv_length);
 
-unlock_and_return:
+ out_free_map:
+	kmem_free(map);
+ out_unlock_ilock:
 	xfs_iunlock_map_shared(ip, lock);
+ out_unlock_iolock:
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-
-	kmem_free(map);
-
 	return error;
 }
 
-- 
GitLab


From 28e211700a81b0a934b6c7a4b8e7dda843634d2f Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Tue, 24 Feb 2009 08:39:02 -0500
Subject: [PATCH 1024/1421] xfs: fix getbmap vs mmap deadlock

xfs_getbmap (or rather the formatters called by it) copy out the getbmap
structures under the ilock, which can deadlock against mmap.  This has
been reported via bugzilla a while ago (#717) and has recently also
shown up via lockdep.

So allocate a temporary buffer to format the kernel getbmap structures
into and then copy them out after dropping the locks.

A little problem with this is that we limit the number of extents we
can copy out by the maximum allocation size, but I see no real way
around that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
---
 fs/xfs/xfs_bmap.c | 52 +++++++++++++++++++++++++++++++----------------
 1 file changed, 35 insertions(+), 17 deletions(-)

diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index abe42448b1c..ca7c6005a48 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -5890,12 +5890,13 @@ xfs_getbmap(
 	int			nexleft;	/* # of user extents left */
 	int			subnex;		/* # of bmapi's can do */
 	int			nmap;		/* number of map entries */
-	struct getbmapx		out;		/* output structure */
+	struct getbmapx		*out;		/* output structure */
 	int			whichfork;	/* data or attr fork */
 	int			prealloced;	/* this is a file with
 						 * preallocated data space */
 	int			iflags;		/* interface flags */
 	int			bmapi_flags;	/* flags for xfs_bmapi */
+	int			cur_ext = 0;
 
 	mp = ip->i_mount;
 	iflags = bmv->bmv_iflags;
@@ -5971,6 +5972,13 @@ xfs_getbmap(
 		return XFS_ERROR(EINVAL);
 	bmvend = bmv->bmv_offset + bmv->bmv_length;
 
+
+	if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx))
+		return XFS_ERROR(ENOMEM);
+	out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL);
+	if (!out)
+		return XFS_ERROR(ENOMEM);
+
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 	if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) {
 		if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) {
@@ -6025,39 +6033,39 @@ xfs_getbmap(
 		ASSERT(nmap <= subnex);
 
 		for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
-			int full = 0;	/* user array is full */
-
-			out.bmv_oflags = 0;
+			out[cur_ext].bmv_oflags = 0;
 			if (map[i].br_state == XFS_EXT_UNWRITTEN)
-				out.bmv_oflags |= BMV_OF_PREALLOC;
+				out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC;
 			else if (map[i].br_startblock == DELAYSTARTBLOCK)
-				out.bmv_oflags |= BMV_OF_DELALLOC;
-			out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff);
-			out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
-			out.bmv_unused1 = out.bmv_unused2 = 0;
+				out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC;
+			out[cur_ext].bmv_offset =
+				XFS_FSB_TO_BB(mp, map[i].br_startoff);
+			out[cur_ext].bmv_length =
+				XFS_FSB_TO_BB(mp, map[i].br_blockcount);
+			out[cur_ext].bmv_unused1 = 0;
+			out[cur_ext].bmv_unused2 = 0;
 			ASSERT(((iflags & BMV_IF_DELALLOC) != 0) ||
 			      (map[i].br_startblock != DELAYSTARTBLOCK));
                         if (map[i].br_startblock == HOLESTARTBLOCK &&
 			    whichfork == XFS_ATTR_FORK) {
 				/* came to the end of attribute fork */
-				out.bmv_oflags |= BMV_OF_LAST;
+				out[cur_ext].bmv_oflags |= BMV_OF_LAST;
 				goto out_free_map;
 			}
 
-			if (!xfs_getbmapx_fix_eof_hole(ip, &out, prealloced,
-					bmvend, map[i].br_startblock))
+			if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext],
+					prealloced, bmvend,
+					map[i].br_startblock))
 				goto out_free_map;
 
-			/* format results & advance arg */
-			error = formatter(&arg, &out, &full);
-			if (error || full)
-				goto out_free_map;
 			nexleft--;
 			bmv->bmv_offset =
-				out.bmv_offset + out.bmv_length;
+				out[cur_ext].bmv_offset +
+				out[cur_ext].bmv_length;
 			bmv->bmv_length =
 				max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
 			bmv->bmv_entries++;
+			cur_ext++;
 		}
 	} while (nmap && nexleft && bmv->bmv_length);
 
@@ -6067,6 +6075,16 @@ xfs_getbmap(
 	xfs_iunlock_map_shared(ip, lock);
  out_unlock_iolock:
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
+
+	for (i = 0; i < cur_ext; i++) {
+		int full = 0;	/* user array is full */
+
+		/* format results & advance arg */
+		error = formatter(&arg, &out[i], &full);
+		if (error || full)
+			break;
+	}
+
 	return error;
 }
 
-- 
GitLab


From 6e85c5ba73c07b990798087e9b858c065db2b234 Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Apr 2009 19:14:32 -0400
Subject: [PATCH 1025/1421] kernel/posix-cpu-timers.c: fix sparse warning

Sparse reports the following in kernel/posix-cpu-timers.c:

  warning: symbol 'firing' shadows an earlier one

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Subrata Modak <subrata@linux.vnet.ibm.com>
LKML-Reference: <BD79186B4FD85F4B8E60E381CAEE1909016C1AFE@mi8nycmail19.Mi8.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/posix-cpu-timers.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index c9dcf98b446..bece7c0b67b 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1420,19 +1420,19 @@ void run_posix_cpu_timers(struct task_struct *tsk)
 	 * timer call will interfere.
 	 */
 	list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) {
-		int firing;
+		int cpu_firing;
+
 		spin_lock(&timer->it_lock);
 		list_del_init(&timer->it.cpu.entry);
-		firing = timer->it.cpu.firing;
+		cpu_firing = timer->it.cpu.firing;
 		timer->it.cpu.firing = 0;
 		/*
 		 * The firing flag is -1 if we collided with a reset
 		 * of the timer, which already reported this
 		 * almost-firing as an overrun.  So don't generate an event.
 		 */
-		if (likely(firing >= 0)) {
+		if (likely(cpu_firing >= 0))
 			cpu_timer_fire(timer);
-		}
 		spin_unlock(&timer->it_lock);
 	}
 }
-- 
GitLab


From 2f65dd475c6a8a997145ea83cc3d2d5e6dc55af1 Mon Sep 17 00:00:00 2001
From: John Wright <john.wright@hp.com>
Date: Wed, 29 Apr 2009 14:32:01 -0600
Subject: [PATCH 1026/1421] x86: gettimeofday() vDSO: fix segfault when tv ==
 NULL

According to the gettimeofday(2) manual:

       If either tv or tz is NULL, the corresponding structure is not
       set or returned.

Since it is legal to give NULL as the tv argument, the code should make
sure tv is not NULL before trying to dereference it.

This issue manifests itself on x86_64 when vdso=0 is not on the kernel
command-line and libc uses the vDSO for gettimeofday() (e.g. glibc >=
2.7).  A simple reproducer:

  #include <stdio.h>
  #include <sys/time.h>

  int main(void)
  {
      struct timezone tz;

      gettimeofday(NULL, &tz);

      return 0;
  }

See http://bugs.debian.org/466491 for more details.

[ Impact: fix gettimeofday(NULL, &tz) segfault ]

Signed-off-by: John Wright <john.wright@hp.com>
Cc: Andi Kleen <ak@suse.de>
Cc: John Wright <john.wright@hp.com>
LKML-Reference: <1241037121-14805-1-git-send-email-john.wright@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/vdso/vclock_gettime.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index d9d35824c56..6a40b78b46a 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
 {
 	long ret;
 	if (likely(gtod->sysctl_enabled && gtod->clock.vread)) {
-		BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
-			     offsetof(struct timespec, tv_nsec) ||
-			     sizeof(*tv) != sizeof(struct timespec));
-		do_realtime((struct timespec *)tv);
-		tv->tv_usec /= 1000;
+		if (likely(tv != NULL)) {
+			BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
+				     offsetof(struct timespec, tv_nsec) ||
+				     sizeof(*tv) != sizeof(struct timespec));
+			do_realtime((struct timespec *)tv);
+			tv->tv_usec /= 1000;
+		}
 		if (unlikely(tz != NULL)) {
 			/* Avoid memcpy. Some old compilers fail to inline it */
 			tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
-- 
GitLab


From d37dc42ab6f040b8f0f2962ab219c5b2accf748d Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:45:08 -0400
Subject: [PATCH 1027/1421] nls: add a nls_nullsize inline

It's possible for character sets to require a multi-byte null
string terminator. Add a helper function that determines the size
of the null terminator at runtime.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 include/linux/nls.h | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/include/linux/nls.h b/include/linux/nls.h
index 6a882208301..52b1a76c1b4 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -58,6 +58,25 @@ static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1,
 	return 0;
 }
 
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+	int charlen;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+	return charlen > 0 ? charlen : 1;
+}
+
 #define MODULE_ALIAS_NLS(name)	MODULE_ALIAS("nls_" __stringify(name))
 
 #endif /* _LINUX_NLS_H */
-- 
GitLab


From 66345f50f070ae7412a28543ee197cb5eff73598 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:45:08 -0400
Subject: [PATCH 1028/1421] cifs: move #defines for mapchars into
 cifs_unicode.h

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.h | 13 +++++++++++++
 fs/cifs/misc.c         | 11 -----------
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 14eb9a2395d..d6fe8ecd1ff 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -37,6 +37,19 @@
 
 #define  UNIUPR_NOLOWER		/* Example to not expand lower case tables */
 
+/*
+ * Windows maps these to the user defined 16 bit Unicode range since they are
+ * reserved symbols (along with \ and /), otherwise illegal to store
+ * in filenames in NTFS
+ */
+#define UNI_ASTERIK     (__u16) ('*' + 0xF000)
+#define UNI_QUESTION    (__u16) ('?' + 0xF000)
+#define UNI_COLON       (__u16) (':' + 0xF000)
+#define UNI_GRTRTHAN    (__u16) ('>' + 0xF000)
+#define UNI_LESSTHAN    (__u16) ('<' + 0xF000)
+#define UNI_PIPE        (__u16) ('|' + 0xF000)
+#define UNI_SLASH       (__u16) ('\\' + 0xF000)
+
 /* Just define what we want from uniupr.h.  We don't want to define the tables
  * in each source file.
  */
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 4c89c572891..bb81c8af6a9 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -635,17 +635,6 @@ dump_smb(struct smb_hdr *smb_buf, int smb_buf_length)
 	return;
 }
 
-/* Windows maps these to the user defined 16 bit Unicode range since they are
-   reserved symbols (along with \ and /), otherwise illegal to store
-   in filenames in NTFS */
-#define UNI_ASTERIK     (__u16) ('*' + 0xF000)
-#define UNI_QUESTION    (__u16) ('?' + 0xF000)
-#define UNI_COLON       (__u16) (':' + 0xF000)
-#define UNI_GRTRTHAN    (__u16) ('>' + 0xF000)
-#define UNI_LESSTHAN    (__u16) ('<' + 0xF000)
-#define UNI_PIPE        (__u16) ('|' + 0xF000)
-#define UNI_SLASH       (__u16) ('\\' + 0xF000)
-
 /* Convert 16 bit Unicode pathname from wire format to string in current code
    page.  Conversion may involve remapping up the seven characters that are
    only legal in POSIX-like OS (if they are present in the string). Path
-- 
GitLab


From 7fabf0c9479fef9fdb9528a5fbdb1cb744a744a4 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:46:15 -0400
Subject: [PATCH 1029/1421] cifs: add replacement for cifs_strtoUCS_le called
 cifs_from_ucs2

Add a replacement function for cifs_strtoUCS_le. cifs_from_ucs2
takes args for the source and destination length so that we can ensure
that the function is confined within the intended buffers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 124 +++++++++++++++++++++++++++++++++++++++++
 fs/cifs/cifs_unicode.h |   2 +
 2 files changed, 126 insertions(+)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 7d75272a6b3..8389f359b03 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -25,6 +25,130 @@
 #include "cifsglob.h"
 #include "cifs_debug.h"
 
+/*
+ * cifs_mapchar - convert a little-endian char to proper char in codepage
+ * @target - where converted character should be copied
+ * @src_char - 2 byte little-endian source character
+ * @cp - codepage to which character should be converted
+ * @mapchar - should character be mapped according to mapchars mount option?
+ *
+ * This function handles the conversion of a single character. It is the
+ * responsibility of the caller to ensure that the target buffer is large
+ * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE).
+ */
+static int
+cifs_mapchar(char *target, const __le16 src_char, const struct nls_table *cp,
+	     bool mapchar)
+{
+	int len = 1;
+
+	if (!mapchar)
+		goto cp_convert;
+
+	/*
+	 * BB: Cannot handle remapping UNI_SLASH until all the calls to
+	 *     build_path_from_dentry are modified, as they use slash as
+	 *     separator.
+	 */
+	switch (le16_to_cpu(src_char)) {
+	case UNI_COLON:
+		*target = ':';
+		break;
+	case UNI_ASTERIK:
+		*target = '*';
+		break;
+	case UNI_QUESTION:
+		*target = '?';
+		break;
+	case UNI_PIPE:
+		*target = '|';
+		break;
+	case UNI_GRTRTHAN:
+		*target = '>';
+		break;
+	case UNI_LESSTHAN:
+		*target = '<';
+		break;
+	default:
+		goto cp_convert;
+	}
+
+out:
+	return len;
+
+cp_convert:
+	len = cp->uni2char(le16_to_cpu(src_char), target,
+			   NLS_MAX_CHARSET_SIZE);
+	if (len <= 0) {
+		*target = '?';
+		len = 1;
+	}
+	goto out;
+}
+
+/*
+ * cifs_from_ucs2 - convert utf16le string to local charset
+ * @to - destination buffer
+ * @from - source buffer
+ * @tolen - destination buffer size (in bytes)
+ * @fromlen - source buffer size (in bytes)
+ * @codepage - codepage to which characters should be converted
+ * @mapchar - should characters be remapped according to the mapchars option?
+ *
+ * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * in the provided codepage. The tolen and fromlen parameters are to ensure
+ * that the code doesn't walk off of the end of the buffer (which is always
+ * a danger if the alignment of the source buffer is off). The destination
+ * string is always properly null terminated and fits in the destination
+ * buffer. Returns the length of the destination string in bytes (including
+ * null terminator).
+ *
+ * Note that some windows versions actually send multiword UTF-16 characters
+ * instead of straight UCS-2. The linux nls routines however aren't able to
+ * deal with those characters properly. In the event that we get some of
+ * those characters, they won't be translated properly.
+ */
+int
+cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+		 const struct nls_table *codepage, bool mapchar)
+{
+	int i, charlen, safelen;
+	int outlen = 0;
+	int nullsize = nls_nullsize(codepage);
+	int fromwords = fromlen / 2;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	/*
+	 * because the chars can be of varying widths, we need to take care
+	 * not to overflow the destination buffer when we get close to the
+	 * end of it. Until we get to this offset, we don't need to check
+	 * for overflow however.
+	 */
+	safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize);
+
+	for (i = 0; i < fromwords && from[i]; i++) {
+		/*
+		 * check to see if converting this character might make the
+		 * conversion bleed into the null terminator
+		 */
+		if (outlen >= safelen) {
+			charlen = cifs_mapchar(tmp, from[i], codepage, mapchar);
+			if ((outlen + charlen) > (tolen - nullsize))
+				break;
+		}
+
+		/* put converted char into 'to' buffer */
+		charlen = cifs_mapchar(&to[outlen], from[i], codepage, mapchar);
+		outlen += charlen;
+	}
+
+	/* properly null-terminate string */
+	for (i = 0; i < nullsize; i++)
+		to[outlen++] = 0;
+
+	return outlen;
+}
+
 /*
  * NAME:	cifs_strfromUCS()
  *
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index d6fe8ecd1ff..6aa6533e49f 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -72,6 +72,8 @@ extern struct UniCaseRange UniLowerRange[];
 #endif				/* UNIUPR_NOLOWER */
 
 #ifdef __KERNEL__
+int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+		   const struct nls_table *codepage, bool mapchar);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 #endif
-- 
GitLab


From 69f801fcaa03be83d58c564f00913b7c172808e4 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:46:32 -0400
Subject: [PATCH 1030/1421] cifs: add new function to get unicode string length
 in bytes

Working in units of words means we do a lot of unnecessary conversion back
and forth. Standardize on bytes instead since that's more useful for
allocating buffers and such. Also, remove hostlen_fromUCS since the new
function has a similar purpose.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 31 +++++++++++++++++++++++++++++++
 fs/cifs/cifs_unicode.h |  2 ++
 fs/cifs/cifssmb.c      | 25 ++-----------------------
 3 files changed, 35 insertions(+), 23 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 8389f359b03..614512573c6 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -25,6 +25,37 @@
 #include "cifsglob.h"
 #include "cifs_debug.h"
 
+/*
+ * cifs_ucs2_bytes - how long will a string be after conversion?
+ * @ucs - pointer to input string
+ * @maxbytes - don't go past this many bytes of input string
+ * @codepage - destination codepage
+ *
+ * Walk a ucs2le string and return the number of bytes that the string will
+ * be after being converted to the given charset, not including any null
+ * termination required. Don't walk past maxbytes in the source buffer.
+ */
+int
+cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+		const struct nls_table *codepage)
+{
+	int i;
+	int charlen, outlen = 0;
+	int maxwords = maxbytes / 2;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	for (i = 0; from[i] && i < maxwords; i++) {
+		charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
+					     NLS_MAX_CHARSET_SIZE);
+		if (charlen > 0)
+			outlen += charlen;
+		else
+			outlen++;
+	}
+
+	return outlen;
+}
+
 /*
  * cifs_mapchar - convert a little-endian char to proper char in codepage
  * @target - where converted character should be copied
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 6aa6533e49f..1857f5ff933 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -74,6 +74,8 @@ extern struct UniCaseRange UniLowerRange[];
 #ifdef __KERNEL__
 int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
 		   const struct nls_table *codepage, bool mapchar);
+int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+		    const struct nls_table *codepage);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 #endif
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a02c43b3faf..cadacae46b8 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3928,27 +3928,6 @@ GetInodeNumOut:
 	return rc;
 }
 
-/* computes length of UCS string converted to host codepage
- * @src:	UCS string
- * @maxlen:	length of the input string in UCS characters
- * 		(not in bytes)
- *
- * return:	size of input string in host codepage
- */
-static int hostlen_fromUCS(const __le16 *src, const int maxlen,
-		const struct nls_table *nls_codepage) {
-	int i;
-	int hostlen = 0;
-	char to[4];
-	int charlen;
-	for (i = 0; (i < maxlen) && src[i]; ++i) {
-		charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
-				to, NLS_MAX_CHARSET_SIZE);
-		hostlen += charlen > 0 ? charlen : 1;
-	}
-	return hostlen;
-}
-
 /* parses DFS refferal V3 structure
  * caller is responsible for freeing target_nodes
  * returns:
@@ -4016,8 +3995,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 						GFP_KERNEL);
 			cifsConvertToUCS((__le16 *) tmp, searchName,
 					PATH_MAX, nls_codepage, remap);
-			node->path_consumed = hostlen_fromUCS(tmp,
-					le16_to_cpu(pSMBr->PathConsumed)/2,
+			node->path_consumed = cifs_ucs2_bytes(tmp,
+					le16_to_cpu(pSMBr->PathConsumed),
 					nls_codepage);
 			kfree(tmp);
 		} else
-- 
GitLab


From 066ce6899484d9026acd6ba3a8dbbedb33d7ae1b Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:16:14 -0400
Subject: [PATCH 1031/1421] cifs: rename cifs_strlcpy_to_host and make it use
 new functions

Rename cifs_strlcpy_to_host to cifs_strndup since that better describes
what this function really does. Then, convert it to use the new string
conversion and measurement functions that work in units of bytes rather
than wide chars.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 38 +++++++++++++++++++++++++++++
 fs/cifs/cifs_unicode.h |  2 ++
 fs/cifs/cifssmb.c      | 55 +++++++++---------------------------------
 3 files changed, 52 insertions(+), 43 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 614512573c6..2a879cff3a4 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -243,3 +243,41 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
 	return i;
 }
 
+/*
+ * cifs_strndup - copy a string from wire format to the local codepage
+ * @src - source string
+ * @maxlen - don't walk past this many bytes in the source string
+ * @is_unicode - is this a unicode string?
+ * @codepage - destination codepage
+ *
+ * Take a string given by the server, convert it to the local codepage and
+ * put it in a new buffer. Returns a pointer to the new string or NULL on
+ * error.
+ */
+char *
+cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
+	     const struct nls_table *codepage)
+{
+	int len;
+	char *dst;
+
+	if (is_unicode) {
+		len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+		len += nls_nullsize(codepage);
+		dst = kmalloc(len, GFP_KERNEL);
+		if (!dst)
+			return NULL;
+		cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+			       false);
+	} else {
+		len = strnlen(src, maxlen);
+		len++;
+		dst = kmalloc(len, GFP_KERNEL);
+		if (!dst)
+			return NULL;
+		strlcpy(dst, src, len);
+	}
+
+	return dst;
+}
+
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 1857f5ff933..e620f0b4220 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -78,6 +78,8 @@ int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 		    const struct nls_table *codepage);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
+		   const struct nls_table *codepage);
 #endif
 
 /*
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index cadacae46b8..f15848374cf 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -81,41 +81,6 @@ static struct {
 #endif /* CONFIG_CIFS_WEAK_PW_HASH */
 #endif /* CIFS_POSIX */
 
-/* Allocates buffer into dst and copies smb string from src to it.
- * caller is responsible for freeing dst if function returned 0.
- * returns:
- * 	on success - 0
- *	on failure - errno
- */
-static int
-cifs_strlcpy_to_host(char **dst, const char *src, const int maxlen,
-		 const bool is_unicode, const struct nls_table *nls_codepage)
-{
-	int plen;
-
-	if (is_unicode) {
-		plen = UniStrnlen((wchar_t *)src, maxlen);
-		*dst = kmalloc((4 * plen) + 2, GFP_KERNEL);
-		if (!*dst)
-			goto cifs_strlcpy_to_host_ErrExit;
-		cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
-		(*dst)[plen] = 0;
-		(*dst)[plen+1] = 0; /* needed for Unicode */
-	} else {
-		plen = strnlen(src, maxlen);
-		*dst = kmalloc(plen + 2, GFP_KERNEL);
-		if (!*dst)
-			goto cifs_strlcpy_to_host_ErrExit;
-		strlcpy(*dst, src, plen);
-	}
-	return 0;
-
-cifs_strlcpy_to_host_ErrExit:
-	cERROR(1, ("Failed to allocate buffer for string\n"));
-	return -ENOMEM;
-}
-
-
 /* Mark as invalid, all open files on tree connections since they
    were closed when session to server was lost */
 static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
@@ -4008,20 +3973,24 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy DfsPath */
 		temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
 		max_len = data_end - temp;
-		rc = cifs_strlcpy_to_host(&(node->path_name), temp,
-					max_len, is_unicode, nls_codepage);
-		if (rc)
+		node->path_name = cifs_strndup(temp, max_len, is_unicode,
+					       nls_codepage);
+		if (IS_ERR(node->path_name)) {
+			rc = PTR_ERR(node->path_name);
+			node->path_name = NULL;
 			goto parse_DFS_referrals_exit;
+		}
 
 		/* copy link target UNC */
 		temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
 		max_len = data_end - temp;
-		rc = cifs_strlcpy_to_host(&(node->node_name), temp,
-					max_len, is_unicode, nls_codepage);
-		if (rc)
+		node->node_name = cifs_strndup(temp, max_len, is_unicode,
+					       nls_codepage);
+		if (IS_ERR(node->node_name)) {
+			rc = PTR_ERR(node->node_name);
+			node->node_name = NULL;
 			goto parse_DFS_referrals_exit;
-
-		ref += le16_to_cpu(ref->Size);
+		}
 	}
 
 parse_DFS_referrals_exit:
-- 
GitLab


From cc20c031bb067eb3280a1c4b5c42295093e24863 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:16:21 -0400
Subject: [PATCH 1032/1421] cifs: convert CIFSTCon to use new unicode helper
 functions

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 49 ++++++++++++++---------------------------------
 1 file changed, 14 insertions(+), 35 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index bacdef1546b..e94d6b29af6 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3638,7 +3638,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	TCONX_RSP *pSMBr;
 	unsigned char *bcc_ptr;
 	int rc = 0;
-	int length;
+	int length, bytes_left;
 	__u16 count;
 
 	if (ses == NULL)
@@ -3726,14 +3726,15 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
 			 CIFS_STD_OP);
 
-	/* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
 	/* above now done in SendReceive */
 	if ((rc == 0) && (tcon != NULL)) {
 		tcon->tidStatus = CifsGood;
 		tcon->need_reconnect = false;
 		tcon->tid = smb_buffer_response->Tid;
 		bcc_ptr = pByteArea(smb_buffer_response);
-		length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
+		bytes_left = BCC(smb_buffer_response);
+		length = strnlen(bcc_ptr, bytes_left - 2);
+
 		/* skip service field (NB: this field is always ASCII) */
 		if (length == 3) {
 			if ((bcc_ptr[0] == 'I') && (bcc_ptr[1] == 'P') &&
@@ -3748,39 +3749,17 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 			}
 		}
 		bcc_ptr += length + 1;
+		bytes_left -= (length + 1);
 		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
-		if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-			length = UniStrnlen((wchar_t *) bcc_ptr, 512);
-			if ((bcc_ptr + (2 * length)) -
-			     pByteArea(smb_buffer_response) <=
-			    BCC(smb_buffer_response)) {
-				kfree(tcon->nativeFileSystem);
-				tcon->nativeFileSystem =
-				    kzalloc((4 * length) + 2, GFP_KERNEL);
-				if (tcon->nativeFileSystem) {
-					cifs_strfromUCS_le(
-						tcon->nativeFileSystem,
-						(__le16 *) bcc_ptr,
-						length, nls_codepage);
-					cFYI(1, ("nativeFileSystem=%s",
-						tcon->nativeFileSystem));
-				}
-			}
-			/* else do not bother copying these information fields*/
-		} else {
-			length = strnlen(bcc_ptr, 1024);
-			if ((bcc_ptr + length) -
-			    pByteArea(smb_buffer_response) <=
-			    BCC(smb_buffer_response)) {
-				kfree(tcon->nativeFileSystem);
-				tcon->nativeFileSystem =
-				    kzalloc(length + 1, GFP_KERNEL);
-				if (tcon->nativeFileSystem)
-					strncpy(tcon->nativeFileSystem, bcc_ptr,
-						length);
-			}
-			/* else do not bother copying these information fields*/
-		}
+
+		/* mostly informational -- no need to fail on error here */
+		tcon->nativeFileSystem = cifs_strndup(bcc_ptr, bytes_left,
+						      smb_buffer->Flags2 &
+							 SMBFLG2_UNICODE,
+						      nls_codepage);
+
+		cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
+
 		if ((smb_buffer_response->WordCount == 3) ||
 			 (smb_buffer_response->WordCount == 7))
 			/* field is in same location */
-- 
GitLab


From 59140797c5817363087b0ffb46e6bb81a11fe0dc Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:16:21 -0400
Subject: [PATCH 1033/1421] cifs: fix session setup unicode string saving to
 use new unicode helpers

...and change decode_unicode_ssetup to be a void function. It never
returns an actual error anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 80 ++++++++++++++------------------------------------
 1 file changed, 22 insertions(+), 58 deletions(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index c652c73760d..93022dc9bab 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -277,12 +277,11 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses,
 	*pbcc_area = bcc_ptr;
 }
 
-static int decode_unicode_ssetup(char **pbcc_area, int bleft,
-				 struct cifsSesInfo *ses,
-				 const struct nls_table *nls_cp)
+static void
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
+		      const struct nls_table *nls_cp)
 {
-	int rc = 0;
-	int words_left, len;
+	int len;
 	char *data = *pbcc_area;
 
 	cFYI(1, ("bleft %d", bleft));
@@ -300,63 +299,29 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 		++bleft;
 	}
 
-	words_left = bleft / 2;
-
-	/* save off server operating system */
-	len = UniStrnlen((wchar_t *) data, words_left);
-
-	if (len >= words_left)
-		return rc;
-
 	kfree(ses->serverOS);
-	/* UTF-8 string will not grow more than four times as big as UCS-16 */
-	ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
-	if (ses->serverOS != NULL) {
-		cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
-		cFYI(1, ("serverOS=%s", ses->serverOS));
-	}
-	data += 2 * (len + 1);
-	words_left -= len + 1;
-
-	/* save off server network operating system */
-	len = UniStrnlen((wchar_t *) data, words_left);
-
-	if (len >= words_left)
-		return rc;
+	ses->serverOS = cifs_strndup(data, bleft, true, nls_cp);
+	cFYI(1, ("serverOS=%s", ses->serverOS));
+	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+	data += len;
+	bleft -= len;
+	if (bleft <= 0)
+		return;
 
 	kfree(ses->serverNOS);
-	ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
-	if (ses->serverNOS != NULL) {
-		cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
-				   nls_cp);
-		cFYI(1, ("serverNOS=%s", ses->serverNOS));
-		if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
-			cFYI(1, ("NT4 server"));
-			ses->flags |= CIFS_SES_NT4;
-		}
-	}
-	data += 2 * (len + 1);
-	words_left -= len + 1;
-
-	/* save off server domain */
-	len = UniStrnlen((wchar_t *) data, words_left);
-
-	if (len > words_left)
-		return rc;
+	ses->serverNOS = cifs_strndup(data, bleft, true, nls_cp);
+	cFYI(1, ("serverNOS=%s", ses->serverNOS));
+	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+	data += len;
+	bleft -= len;
+	if (bleft <= 0)
+		return;
 
 	kfree(ses->serverDomain);
-	ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
-	if (ses->serverDomain != NULL) {
-		cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
-				   nls_cp);
-		cFYI(1, ("serverDomain=%s", ses->serverDomain));
-	}
-	data += 2 * (len + 1);
-	words_left -= len + 1;
+	ses->serverDomain = cifs_strndup(data, bleft, true, nls_cp);
+	cFYI(1, ("serverDomain=%s", ses->serverDomain));
 
-	cFYI(1, ("words left: %d", words_left));
-
-	return rc;
+	return;
 }
 
 static int decode_ascii_ssetup(char **pbcc_area, int bleft,
@@ -709,8 +674,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 			++bcc_ptr;
 			--bytes_remaining;
 		}
-		rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
-					   ses, nls_cp);
+		decode_unicode_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp);
 	} else {
 		rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
 					 ses, nls_cp);
-- 
GitLab


From 460b96960d1946914e50316ffeefe7b41dddce91 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:17:56 -0400
Subject: [PATCH 1034/1421] cifs: change CIFSSMBUnixQuerySymLink to use new
 helpers

Change CIFSSMBUnixQuerySymLink to use the new unicode helper functions.
Also change the calling conventions so that the allocation of the target
name buffer is done in CIFSSMBUnixQuerySymLink rather than by the caller.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsproto.h |  3 +--
 fs/cifs/cifssmb.c   | 36 ++++++++++++++----------------------
 fs/cifs/link.c      | 22 +++++-----------------
 3 files changed, 20 insertions(+), 41 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 4167716d32f..7d54a5a4dd5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -260,8 +260,7 @@ extern int CIFSUnixCreateSymLink(const int xid,
 			const struct nls_table *nls_codepage);
 extern int CIFSSMBUnixQuerySymLink(const int xid,
 			struct cifsTconInfo *tcon,
-			const unsigned char *searchName,
-			char *syminfo, const int buflen,
+			const unsigned char *searchName, char **syminfo,
 			const struct nls_table *nls_codepage);
 extern int CIFSSMBQueryReparseLinkInfo(const int xid,
 			struct cifsTconInfo *tcon,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index f15848374cf..dfb8e391d53 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2382,8 +2382,7 @@ winCreateHardLinkRetry:
 
 int
 CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
-			const unsigned char *searchName,
-			char *symlinkinfo, const int buflen,
+			const unsigned char *searchName, char **symlinkinfo,
 			const struct nls_table *nls_codepage)
 {
 /* SMB_QUERY_FILE_UNIX_LINK */
@@ -2393,6 +2392,7 @@ CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
 	int bytes_returned;
 	int name_len;
 	__u16 params, byte_count;
+	char *data_start;
 
 	cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
 
@@ -2447,30 +2447,22 @@ querySymLinkRetry:
 		/* decode response */
 
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-		if (rc || (pSMBr->ByteCount < 2))
 		/* BB also check enough total bytes returned */
-			rc = -EIO;	/* bad smb */
+		if (rc || (pSMBr->ByteCount < 2))
+			rc = -EIO;
 		else {
-			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
-			__u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+			u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+
+			data_start = ((char *) &pSMBr->hdr.Protocol) +
+					   le16_to_cpu(pSMBr->t2.DataOffset);
 
-			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-				name_len = UniStrnlen((wchar_t *) ((char *)
-					&pSMBr->hdr.Protocol + data_offset),
-					min_t(const int, buflen, count) / 2);
 			/* BB FIXME investigate remapping reserved chars here */
-				cifs_strfromUCS_le(symlinkinfo,
-					(__le16 *) ((char *)&pSMBr->hdr.Protocol
-							+ data_offset),
-					name_len, nls_codepage);
-			} else {
-				strncpy(symlinkinfo,
-					(char *) &pSMBr->hdr.Protocol +
-						data_offset,
-					min_t(const int, buflen, count));
-			}
-			symlinkinfo[buflen] = 0;
-	/* just in case so calling code does not go off the end of buffer */
+			*symlinkinfo = cifs_strndup(data_start, count,
+						    pSMBr->hdr.Flags2 &
+							SMBFLG2_UNICODE,
+						    nls_codepage);
+			if (!symlinkinfo)
+				rc = -ENOMEM;
 		}
 	}
 	cifs_buf_release(pSMB);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 63f644000ce..e17a092f43e 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -119,16 +119,11 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 	full_path = build_path_from_dentry(direntry);
 
 	if (!full_path)
-		goto out_no_free;
+		goto out;
 
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
-	target_path = kmalloc(PATH_MAX, GFP_KERNEL);
-	if (!target_path) {
-		target_path = ERR_PTR(-ENOMEM);
-		goto out;
-	}
 
 	/* We could change this to:
 		if (pTcon->unix_ext)
@@ -138,8 +133,7 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 
 	if (pTcon->ses->capabilities & CAP_UNIX)
 		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-					     target_path,
-					     PATH_MAX-1,
+					     &target_path,
 					     cifs_sb->local_nls);
 	else {
 		/* BB add read reparse point symlink code here */
@@ -148,22 +142,16 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 		/* BB Add MAC style xsymlink check here if enabled */
 	}
 
-	if (rc == 0) {
-
-/* BB Add special case check for Samba DFS symlinks */
-
-		target_path[PATH_MAX-1] = 0;
-	} else {
+	if (rc != 0) {
 		kfree(target_path);
 		target_path = ERR_PTR(rc);
 	}
 
-out:
 	kfree(full_path);
-out_no_free:
+out:
 	FreeXid(xid);
 	nd_set_link(nd, target_path);
-	return NULL;	/* No cookie */
+	return NULL;
 }
 
 int
-- 
GitLab


From f58841666bc22e827ca0dcef7b71c7bc2758ce82 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:18:00 -0400
Subject: [PATCH 1035/1421] cifs: change cifs_get_name_from_search_buf to use
 new unicode helper

...and remove cifs_convertUCSpath. There are no more callers. Also add a
#define for the buffer used in the readdir path so that we don't have so
many magic numbers floating around.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsproto.h |  2 --
 fs/cifs/misc.c      | 60 ---------------------------------------------
 fs/cifs/readdir.c   | 26 ++++++++++----------
 3 files changed, 13 insertions(+), 75 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 7d54a5a4dd5..fae083930ee 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -306,8 +306,6 @@ extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName, __u64 *inode_number,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
-extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
-			const struct nls_table *codepage);
 extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
 			const struct nls_table *cp, int mapChars);
 
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index bb81c8af6a9..e079a9190ec 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -635,66 +635,6 @@ dump_smb(struct smb_hdr *smb_buf, int smb_buf_length)
 	return;
 }
 
-/* Convert 16 bit Unicode pathname from wire format to string in current code
-   page.  Conversion may involve remapping up the seven characters that are
-   only legal in POSIX-like OS (if they are present in the string). Path
-   names are little endian 16 bit Unicode on the wire */
-int
-cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
-		    const struct nls_table *cp)
-{
-	int i, j, len;
-	__u16 src_char;
-
-	for (i = 0, j = 0; i < maxlen; i++) {
-		src_char = le16_to_cpu(source[i]);
-		switch (src_char) {
-			case 0:
-				goto cUCS_out; /* BB check this BB */
-			case UNI_COLON:
-				target[j] = ':';
-				break;
-			case UNI_ASTERIK:
-				target[j] = '*';
-				break;
-			case UNI_QUESTION:
-				target[j] = '?';
-				break;
-			/* BB We can not handle remapping slash until
-			   all the calls to build_path_from_dentry
-			   are modified, as they use slash as separator BB */
-			/* case UNI_SLASH:
-				target[j] = '\\';
-				break;*/
-			case UNI_PIPE:
-				target[j] = '|';
-				break;
-			case UNI_GRTRTHAN:
-				target[j] = '>';
-				break;
-			case UNI_LESSTHAN:
-				target[j] = '<';
-				break;
-			default:
-				len = cp->uni2char(src_char, &target[j],
-						NLS_MAX_CHARSET_SIZE);
-				if (len > 0) {
-					j += len;
-					continue;
-				} else {
-					target[j] = '?';
-				}
-		}
-		j++;
-		/* make sure we do not overrun callers allocated temp buffer */
-		if (j >= (2 * NAME_MAX))
-			break;
-	}
-cUCS_out:
-	target[j] = 0;
-	return j;
-}
-
 /* Convert 16 bit Unicode pathname to wire format from string in current code
    page.  Conversion may involve remapping up the seven characters that are
    only legal in POSIX-like OS (if they are present in the string). Path
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index ebd0da7ecb3..e1351fe18a1 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -31,6 +31,13 @@
 #include "cifs_fs_sb.h"
 #include "cifsfs.h"
 
+/*
+ * To be safe - for UCS to UTF-8 with strings loaded with the rare long
+ * characters alloc more to account for such multibyte target UTF-8
+ * characters.
+ */
+#define UNICODE_NAME_MAX ((4 * NAME_MAX) + 2)
+
 #ifdef CONFIG_CIFS_DEBUG2
 static void dump_cifs_file_struct(struct file *file, char *label)
 {
@@ -881,14 +888,11 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	}
 
 	if (unicode) {
-		/* BB fixme - test with long names */
-		/* Note converted filename can be longer than in unicode */
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
-			pqst->len = cifs_convertUCSpath((char *)pqst->name,
-					(__le16 *)filename, len/2, nlt);
-		else
-			pqst->len = cifs_strfromUCS_le((char *)pqst->name,
-					(__le16 *)filename, len/2, nlt);
+		pqst->len = cifs_from_ucs2((char *) pqst->name,
+					   (__le16 *) filename,
+					   UNICODE_NAME_MAX, max_len, nlt,
+					   cifs_sb->mnt_cifs_flags &
+						CIFS_MOUNT_MAP_SPECIAL_CHR);
 	} else {
 		pqst->name = filename;
 		pqst->len = len;
@@ -1070,11 +1074,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 				cifsFile->srch_inf.ntwrk_buf_start);
 		end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
 
-		/* To be safe - for UCS to UTF-8 with strings loaded
-		with the rare long characters alloc more to account for
-		such multibyte target UTF-8 characters. cifs_unicode.c,
-		which actually does the conversion, has the same limit */
-		tmp_buf = kmalloc((4 * NAME_MAX) + 2, GFP_KERNEL);
+		tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
 		for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
 			if (current_entry == NULL) {
 				/* evaluate whether this case is an error */
-- 
GitLab


From 20418acd6874792359b42c12d159f42f17593f34 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 30 Apr 2009 16:13:32 +0000
Subject: [PATCH 1036/1421] [CIFS] Remove older session setup implementation

Two years ago, when the session setup code in cifs was rewritten and moved
to fs/cifs/sess.c, we were asked to keep the old code for a release or so
(which could be reenabled at runtime) since it was such a large change and
because the asn (SPNEGO) and NTLMSSP code was not rewritten and needed to
be. This was useful to avoid regressions, but is long overdue to be removed.
Now that the Kerberos (asn/spnego) code is working in fs/cifs/sess.c,
and the NTLMSSP code moved (NTLMSSP blob setup be rewritten with the
next patch in this series) quite a bit of dead code from fs/cifs/connect.c
now can be removed.

This old code should have been removed last year, but the earlier krb5
patches did not move/remove the NTLMSSP code which we had asked to
be done first.  Since no one else volunteered, I am doing it now.

It is extremely important that we continue to examine the documentation
for this area, to make sure our code continues to be uptodate with
changes since Windows 2003.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 381 +---------------------------------------------
 1 file changed, 7 insertions(+), 374 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index e94d6b29af6..579a628d1e6 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2592,310 +2592,6 @@ out:
 	return rc;
 }
 
-static int
-CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-	      char session_key[CIFS_SESS_KEY_SIZE],
-	      const struct nls_table *nls_codepage)
-{
-	struct smb_hdr *smb_buffer;
-	struct smb_hdr *smb_buffer_response;
-	SESSION_SETUP_ANDX *pSMB;
-	SESSION_SETUP_ANDX *pSMBr;
-	char *bcc_ptr;
-	char *user;
-	char *domain;
-	int rc = 0;
-	int remaining_words = 0;
-	int bytes_returned = 0;
-	int len;
-	__u32 capabilities;
-	__u16 count;
-
-	cFYI(1, ("In sesssetup"));
-	if (ses == NULL)
-		return -EINVAL;
-	user = ses->userName;
-	domain = ses->domainName;
-	smb_buffer = cifs_buf_get();
-
-	if (smb_buffer == NULL)
-		return -ENOMEM;
-
-	smb_buffer_response = smb_buffer;
-	pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-
-	/* send SMBsessionSetup here */
-	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-			NULL /* no tCon exists yet */ , 13 /* wct */ );
-
-	smb_buffer->Mid = GetNextMid(ses->server);
-	pSMB->req_no_secext.AndXCommand = 0xFF;
-	pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-	pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
-	if (ses->server->secMode &
-			(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
-	capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-		CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
-	if (ses->capabilities & CAP_UNICODE) {
-		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-		capabilities |= CAP_UNICODE;
-	}
-	if (ses->capabilities & CAP_STATUS32) {
-		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-		capabilities |= CAP_STATUS32;
-	}
-	if (ses->capabilities & CAP_DFS) {
-		smb_buffer->Flags2 |= SMBFLG2_DFS;
-		capabilities |= CAP_DFS;
-	}
-	pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
-
-	pSMB->req_no_secext.CaseInsensitivePasswordLength =
-		cpu_to_le16(CIFS_SESS_KEY_SIZE);
-
-	pSMB->req_no_secext.CaseSensitivePasswordLength =
-	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
-	bcc_ptr = pByteArea(smb_buffer);
-	memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
-	bcc_ptr += CIFS_SESS_KEY_SIZE;
-	memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
-	bcc_ptr += CIFS_SESS_KEY_SIZE;
-
-	if (ses->capabilities & CAP_UNICODE) {
-		if ((long) bcc_ptr % 2) { /* must be word aligned for Unicode */
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-		if (user == NULL)
-			bytes_returned = 0; /* skip null user */
-		else
-			bytes_returned =
-				cifs_strtoUCS((__le16 *) bcc_ptr, user, 100,
-					nls_codepage);
-		/* convert number of 16 bit words to bytes */
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;	/* trailing null */
-		if (domain == NULL)
-			bytes_returned =
-			    cifs_strtoUCS((__le16 *) bcc_ptr,
-					  "CIFS_LINUX_DOM", 32, nls_codepage);
-		else
-			bytes_returned =
-			    cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
-					  nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release,
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
-				  64, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;
-	} else {
-		if (user != NULL) {
-		    strncpy(bcc_ptr, user, 200);
-		    bcc_ptr += strnlen(user, 200);
-		}
-		*bcc_ptr = 0;
-		bcc_ptr++;
-		if (domain == NULL) {
-			strcpy(bcc_ptr, "CIFS_LINUX_DOM");
-			bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
-		} else {
-			strncpy(bcc_ptr, domain, 64);
-			bcc_ptr += strnlen(domain, 64);
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-		strcpy(bcc_ptr, "Linux version ");
-		bcc_ptr += strlen("Linux version ");
-		strcpy(bcc_ptr, utsname()->release);
-		bcc_ptr += strlen(utsname()->release) + 1;
-		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-	}
-	count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-	smb_buffer->smb_buf_length += count;
-	pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
-
-	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-			 &bytes_returned, CIFS_LONG_OP);
-	if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
-	} else if ((smb_buffer_response->WordCount == 3)
-		   || (smb_buffer_response->WordCount == 4)) {
-		__u16 action = le16_to_cpu(pSMBr->resp.Action);
-		__u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-		if (action & GUEST_LOGIN)
-			cFYI(1, ("Guest login")); /* BB mark SesInfo struct? */
-		ses->Suid = smb_buffer_response->Uid; /* UID left in wire format
-							 (little endian) */
-		cFYI(1, ("UID = %d ", ses->Suid));
-	/* response can have either 3 or 4 word count - Samba sends 3 */
-		bcc_ptr = pByteArea(smb_buffer_response);
-		if ((pSMBr->resp.hdr.WordCount == 3)
-		    || ((pSMBr->resp.hdr.WordCount == 4)
-			&& (blob_len < pSMBr->resp.ByteCount))) {
-			if (pSMBr->resp.hdr.WordCount == 4)
-				bcc_ptr += blob_len;
-
-			if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-				if ((long) (bcc_ptr) % 2) {
-					remaining_words =
-					    (BCC(smb_buffer_response) - 1) / 2;
-					/* Unicode strings must be word
-					   aligned */
-					bcc_ptr++;
-				} else {
-					remaining_words =
-						BCC(smb_buffer_response) / 2;
-				}
-				len =
-				    UniStrnlen((wchar_t *) bcc_ptr,
-					       remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
-   the end since (at least) WIN2K and Windows XP have a major bug in not null
-   terminating last Unicode string in response  */
-				kfree(ses->serverOS);
-				ses->serverOS = kzalloc(2 * (len + 1),
-							GFP_KERNEL);
-				if (ses->serverOS == NULL)
-					goto sesssetup_nomem;
-				cifs_strfromUCS_le(ses->serverOS,
-						   (__le16 *)bcc_ptr,
-						   len, nls_codepage);
-				bcc_ptr += 2 * (len + 1);
-				remaining_words -= len + 1;
-				ses->serverOS[2 * len] = 0;
-				ses->serverOS[1 + (2 * len)] = 0;
-				if (remaining_words > 0) {
-					len = UniStrnlen((wchar_t *)bcc_ptr,
-							 remaining_words-1);
-					kfree(ses->serverNOS);
-					ses->serverNOS = kzalloc(2 * (len + 1),
-								 GFP_KERNEL);
-					if (ses->serverNOS == NULL)
-						goto sesssetup_nomem;
-					cifs_strfromUCS_le(ses->serverNOS,
-							   (__le16 *)bcc_ptr,
-							   len, nls_codepage);
-					bcc_ptr += 2 * (len + 1);
-					ses->serverNOS[2 * len] = 0;
-					ses->serverNOS[1 + (2 * len)] = 0;
-					if (strncmp(ses->serverNOS,
-						"NT LAN Manager 4", 16) == 0) {
-						cFYI(1, ("NT4 server"));
-						ses->flags |= CIFS_SES_NT4;
-					}
-					remaining_words -= len + 1;
-					if (remaining_words > 0) {
-						len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
-				/* last string is not always null terminated
-				   (for e.g. for Windows XP & 2000) */
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-						    kzalloc(2*(len+1),
-							    GFP_KERNEL);
-						if (ses->serverDomain == NULL)
-							goto sesssetup_nomem;
-						cifs_strfromUCS_le(ses->serverDomain,
-							(__le16 *)bcc_ptr,
-							len, nls_codepage);
-						bcc_ptr += 2 * (len + 1);
-						ses->serverDomain[2*len] = 0;
-						ses->serverDomain[1+(2*len)] = 0;
-					} else { /* else no more room so create
-						  dummy domain string */
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-							kzalloc(2, GFP_KERNEL);
-					}
-				} else { /* no room so create dummy domain
-					    and NOS string */
-
-					/* if these kcallocs fail not much we
-					   can do, but better to not fail the
-					   sesssetup itself */
-					kfree(ses->serverDomain);
-					ses->serverDomain =
-					    kzalloc(2, GFP_KERNEL);
-					kfree(ses->serverNOS);
-					ses->serverNOS =
-					    kzalloc(2, GFP_KERNEL);
-				}
-			} else {	/* ASCII */
-				len = strnlen(bcc_ptr, 1024);
-				if (((long) bcc_ptr + len) - (long)
-				    pByteArea(smb_buffer_response)
-					    <= BCC(smb_buffer_response)) {
-					kfree(ses->serverOS);
-					ses->serverOS = kzalloc(len + 1,
-								GFP_KERNEL);
-					if (ses->serverOS == NULL)
-						goto sesssetup_nomem;
-					strncpy(ses->serverOS, bcc_ptr, len);
-
-					bcc_ptr += len;
-					/* null terminate the string */
-					bcc_ptr[0] = 0;
-					bcc_ptr++;
-
-					len = strnlen(bcc_ptr, 1024);
-					kfree(ses->serverNOS);
-					ses->serverNOS = kzalloc(len + 1,
-								 GFP_KERNEL);
-					if (ses->serverNOS == NULL)
-						goto sesssetup_nomem;
-					strncpy(ses->serverNOS, bcc_ptr, len);
-					bcc_ptr += len;
-					bcc_ptr[0] = 0;
-					bcc_ptr++;
-
-					len = strnlen(bcc_ptr, 1024);
-					kfree(ses->serverDomain);
-					ses->serverDomain = kzalloc(len + 1,
-								    GFP_KERNEL);
-					if (ses->serverDomain == NULL)
-						goto sesssetup_nomem;
-					strncpy(ses->serverDomain, bcc_ptr,
-						len);
-					bcc_ptr += len;
-					bcc_ptr[0] = 0;
-					bcc_ptr++;
-				} else
-					cFYI(1,
-					     ("Variable field of length %d "
-						"extends beyond end of smb ",
-					      len));
-			}
-		} else {
-			cERROR(1, ("Security Blob Length extends beyond "
-				"end of SMB"));
-		}
-	} else {
-		cERROR(1, ("Invalid Word count %d: ",
-			smb_buffer_response->WordCount));
-		rc = -EIO;
-	}
-sesssetup_nomem:	/* do not return an error on nomem for the info strings,
-			   since that could make reconnection harder, and
-			   reconnection might be needed to free memory */
-	cifs_buf_release(smb_buffer);
-
-	return rc;
-}
-
 static int
 CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 			      struct cifsSesInfo *ses, bool *pNTLMv2_flag,
@@ -3229,6 +2925,7 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 
 	return rc;
 }
+
 static int
 CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			char *ntlm_session_key, bool ntlmv2_flag,
@@ -3831,83 +3528,19 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 	pSesInfo->capabilities = server->capabilities;
 	if (linuxExtEnabled == 0)
 		pSesInfo->capabilities &= (~CAP_UNIX);
-	/*	pSesInfo->sequence_number = 0;*/
+
 	cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
 		 server->secMode, server->capabilities, server->timeAdj));
 
-	if (experimEnabled < 2)
-		rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
-	else if (extended_security
-			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			&& (server->secType == NTLMSSP)) {
-		rc = -EOPNOTSUPP;
-	} else if (extended_security
-			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			&& (server->secType == RawNTLMSSP)) {
-		cFYI(1, ("NTLMSSP sesssetup"));
-		rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
-						   nls_info);
-		if (!rc) {
-			if (ntlmv2_flag) {
-				char *v2_response;
-				cFYI(1, ("more secure NTLM ver2 hash"));
-				if (CalcNTLMv2_partial_mac_key(pSesInfo,
-								nls_info)) {
-					rc = -ENOMEM;
-					goto ss_err_exit;
-				} else
-					v2_response = kmalloc(16 + 64 /* blob*/,
-								GFP_KERNEL);
-				if (v2_response) {
-					CalcNTLMv2_response(pSesInfo,
-								v2_response);
-				/*	if (first_time)
-						cifs_calculate_ntlmv2_mac_key */
-					kfree(v2_response);
-					/* BB Put dummy sig in SessSetup PDU? */
-				} else {
-					rc = -ENOMEM;
-					goto ss_err_exit;
-				}
-
-			} else {
-				SMBNTencrypt(pSesInfo->password,
-					     server->cryptKey,
-					     ntlm_session_key);
-
-				if (first_time)
-					cifs_calculate_mac_key(
-					     &server->mac_signing_key,
-					     ntlm_session_key,
-					     pSesInfo->password);
-			}
-			/* for better security the weaker lanman hash not sent
-			   in AuthSessSetup so we no longer calculate it */
-
-			rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
-						      ntlm_session_key,
-						      ntlmv2_flag,
-						      nls_info);
-		}
-	} else { /* old style NTLM 0.12 session setup */
-		SMBNTencrypt(pSesInfo->password, server->cryptKey,
-			     ntlm_session_key);
-
-		if (first_time)
-			cifs_calculate_mac_key(&server->mac_signing_key,
-						ntlm_session_key,
-						pSesInfo->password);
-
-		rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
-	}
+	rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
 	if (rc) {
 		cERROR(1, ("Send error in SessSetup = %d", rc));
 	} else {
 		cFYI(1, ("CIFS Session Established successfully"));
-			spin_lock(&GlobalMid_Lock);
-			pSesInfo->status = CifsGood;
-			pSesInfo->need_reconnect = false;
-			spin_unlock(&GlobalMid_Lock);
+		spin_lock(&GlobalMid_Lock);
+		pSesInfo->status = CifsGood;
+		pSesInfo->need_reconnect = false;
+		spin_unlock(&GlobalMid_Lock);
 	}
 
 ss_err_exit:
-- 
GitLab


From 96c16743973e8c1a7b9c655d10b7973408d6d1dd Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Thu, 30 Apr 2009 18:24:34 +0200
Subject: [PATCH 1037/1421] ide-cd: fix REQ_QUIET tests in cdrom_decode_status

Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy.
This is a more proper fix which introduces blk_rq_quiet() macro
alleviating the need for dumb, too short caching variables.

Thanks to Helge Deller and Bart for debugging this.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c   | 9 ++++-----
 include/linux/blkdev.h | 1 +
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 3d4e0996976..925eb9e245d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -312,7 +312,6 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = hwif->rq;
 	int err, sense_key, do_end_request = 0;
-	u8 quiet = rq->cmd_flags & REQ_QUIET;
 
 	/* get the IDE error register */
 	err = ide_read_error(drive);
@@ -347,7 +346,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 		} else {
 			cdrom_saw_media_change(drive);
 
-			if (blk_fs_request(rq) && !quiet)
+			if (blk_fs_request(rq) && !blk_rq_quiet(rq))
 				printk(KERN_ERR PFX "%s: tray open\n",
 					drive->name);
 		}
@@ -382,7 +381,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 		 * No point in retrying after an illegal request or data
 		 * protect error.
 		 */
-		if (!quiet)
+		if (!blk_rq_quiet(rq))
 			ide_dump_status(drive, "command error", stat);
 		do_end_request = 1;
 		break;
@@ -391,14 +390,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 		 * No point in re-trying a zillion times on a bad sector.
 		 * If we got here the error is not correctable.
 		 */
-		if (!quiet)
+		if (!blk_rq_quiet(rq))
 			ide_dump_status(drive, "media error "
 					"(bad sector)", stat);
 		do_end_request = 1;
 		break;
 	case BLANK_CHECK:
 		/* disk appears blank? */
-		if (!quiet)
+		if (!blk_rq_quiet(rq))
 			ide_dump_status(drive, "media error (blank)",
 					stat);
 		do_end_request = 1;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ba54c834a59..6f841fb1be3 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -598,6 +598,7 @@ enum {
 				 blk_failfast_transport(rq) ||	\
 				 blk_failfast_driver(rq))
 #define blk_rq_started(rq)	((rq)->cmd_flags & REQ_STARTED)
+#define blk_rq_quiet(rq)	((rq)->cmd_flags & REQ_QUIET)
 
 #define blk_account_rq(rq)	(blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) 
 
-- 
GitLab


From 1af28ceb923d04357733642a3dbc4497da4db1c2 Mon Sep 17 00:00:00 2001
From: Igor Mammedov <niallain@gmail.com>
Date: Tue, 17 Mar 2009 19:00:30 +0300
Subject: [PATCH 1038/1421] Enable dfs submounts to handle remote referrals.

Having remote dfs root support in cifs_mount, we can
afford to pass into it UNC that is remote.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_dfs_ref.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 5fdbf8a1447..896b08fb1ec 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -341,27 +341,23 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 
 	for (i = 0; i < num_referrals; i++) {
 		dump_referral(referrals+i);
-		/* connect to a storage node */
-		if (referrals[i].flags & DFSREF_STORAGE_SERVER) {
-			int len;
-			len = strlen(referrals[i].node_name);
-			if (len < 2) {
-				cERROR(1, ("%s: Net Address path too short: %s",
+		/* connect to a node */
+		int len;
+		len = strlen(referrals[i].node_name);
+		if (len < 2) {
+			cERROR(1, ("%s: Net Address path too short: %s",
 					__func__, referrals[i].node_name));
-				rc = -EINVAL;
-				goto out_err;
-			}
-			mnt = cifs_dfs_do_refmount(nd->path.mnt,
-						nd->path.dentry,
-						referrals + i);
-			cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
-					 __func__,
+			rc = -EINVAL;
+			goto out_err;
+		}
+		mnt = cifs_dfs_do_refmount(nd->path.mnt,
+				nd->path.dentry, referrals + i);
+		cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
 					referrals[i].node_name, mnt));
 
-			/* complete mount procedure if we accured submount */
-			if (!IS_ERR(mnt))
-				break;
-		}
+		/* complete mount procedure if we accured submount */
+		if (!IS_ERR(mnt))
+			break;
 	}
 
 	/* we need it cause for() above could exit without valid submount */
-- 
GitLab


From 5c2503a8e339fbc82f49d5706c5a4ad650dd9711 Mon Sep 17 00:00:00 2001
From: Igor Mammedov <niallain@gmail.com>
Date: Tue, 21 Apr 2009 19:31:05 +0400
Subject: [PATCH 1039/1421] Added loop check when mounting DFS tree.

Added loop check when mounting DFS tree. mount will fail with
ELOOP if referral walks exceed MAX_NESTED_LINK count.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 579a628d1e6..7e5d4fda493 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -32,6 +32,7 @@
 #include <linux/kthread.h>
 #include <linux/pagevec.h>
 #include <linux/freezer.h>
+#include <linux/namei.h>
 #include <asm/uaccess.h>
 #include <asm/processor.h>
 #include <net/ipv6.h>
@@ -2278,6 +2279,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	struct dfs_info3_param *referrals = NULL;
 	unsigned int num_referrals = 0;
+	int referral_walks_count = 0;
 try_mount_again:
 #endif
 	full_path = NULL;
@@ -2525,6 +2527,16 @@ remote_path_check:
 	/* get referral if needed */
 	if (rc == -EREMOTE) {
 #ifdef CONFIG_CIFS_DFS_UPCALL
+		if (referral_walks_count > MAX_NESTED_LINKS) {
+			/*
+			 * BB: when we implement proper loop detection,
+			 *     we will remove this check. But now we need it
+			 *     to prevent an indefinite loop if 'DFS tree' is
+			 *     misconfigured (i.e. has loops).
+			 */
+			rc = -ELOOP;
+			goto mount_fail_check;
+		}
 		/* convert forward to back slashes in prepath here if needed */
 		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
 			convert_delimiter(cifs_sb->prepath,
@@ -2558,6 +2570,7 @@ remote_path_check:
 			cleanup_volume_info(&volume_info);
 			FreeXid(xid);
 			kfree(full_path);
+			referral_walks_count++;
 			goto try_mount_again;
 		}
 #else /* No DFS support, return error on mount */
-- 
GitLab


From eacaad01b4e67336b5b3f4db6dc15ef92c64b47d Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 28 Apr 2009 07:49:21 -0700
Subject: [PATCH 1040/1421] Input: document the multi-touch (MT) protocol

This patchs adds documentation for the multi-touch protocol to
Documentation/input/.

[randy.dunlap@oracle.com: grammar fixes]
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 Documentation/input/multi-touch-protocol.txt | 140 +++++++++++++++++++
 1 file changed, 140 insertions(+)
 create mode 100644 Documentation/input/multi-touch-protocol.txt

diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
new file mode 100644
index 00000000000..9f09557aea3
--- /dev/null
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -0,0 +1,140 @@
+Multi-touch (MT) Protocol
+-------------------------
+	Copyright (C) 2009	Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation.  The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.
-- 
GitLab


From d185cda7712fd1d9e349174639d76eadc66679be Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 30 Apr 2009 17:45:10 +0000
Subject: [PATCH 1041/1421] [CIFS] rename cifs_strndup to cifs_strndup_from_ucs

In most cases, cifs_strndup is converting from Unicode (UCS2 / UTF-32) to
the configured local code page for the Linux mount (usually UTF8), so
Jeff suggested that to make it more clear that cifs_strndup is doing
a conversion not just memory allocation and copy, rename the function
to including "from_ucs" (ie Unicode)

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES        |  6 +++++-
 fs/cifs/cifs_unicode.c |  6 +++---
 fs/cifs/cifs_unicode.h |  7 ++++---
 fs/cifs/cifssmb.c      | 12 ++++++------
 fs/cifs/connect.c      |  5 +++--
 fs/cifs/sess.c         |  8 ++++----
 6 files changed, 25 insertions(+), 19 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1bf81813627..1b0643c2eac 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -2,7 +2,11 @@ Version 1.58
 ------------
 Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
 when the UTF-8 string is composed of unusually long (more than 4 byte) converted
-characters.
+characters. Add support for mounting root of a share which redirects immediately
+to DFS target. Convert string conversion functions from Unicode to more
+accurately mark string length before allocating memory (which may help the
+rare cases where a UTF-8 string is much larger than the UCS2 string that
+we converted from).
  
 Version 1.57
 ------------
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 2a879cff3a4..6382720acf7 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -1,7 +1,7 @@
 /*
  *   fs/cifs/cifs_unicode.c
  *
- *   Copyright (c) International Business Machines  Corp., 2000,2005
+ *   Copyright (c) International Business Machines  Corp., 2000,2009
  *   Modified by Steve French (sfrench@us.ibm.com)
  *
  *   This program is free software;  you can redistribute it and/or modify
@@ -244,7 +244,7 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
 }
 
 /*
- * cifs_strndup - copy a string from wire format to the local codepage
+ * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
  * @src - source string
  * @maxlen - don't walk past this many bytes in the source string
  * @is_unicode - is this a unicode string?
@@ -255,7 +255,7 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
  * error.
  */
 char *
-cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
+cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
 	     const struct nls_table *codepage)
 {
 	int len;
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index e620f0b4220..1570a701bf3 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -5,7 +5,7 @@
  *     Convert a unicode character to upper or lower case using
  *     compressed tables.
  *
- *   Copyright (c) International Business Machines  Corp., 2000,2007
+ *   Copyright (c) International Business Machines  Corp., 2000,2009
  *
  *   This program is free software;  you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -78,8 +78,9 @@ int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 		    const struct nls_table *codepage);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
-char *cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
-		   const struct nls_table *codepage);
+char *cifs_strndup_from_ucs(const char *src, const int maxlen,
+			    const bool is_unicode,
+			    const struct nls_table *codepage);
 #endif
 
 /*
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index dfb8e391d53..df5276e628b 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1,7 +1,7 @@
 /*
  *   fs/cifs/cifssmb.c
  *
- *   Copyright (C) International Business Machines  Corp., 2002,2008
+ *   Copyright (C) International Business Machines  Corp., 2002,2009
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   Contains the routines for constructing the SMB PDUs themselves
@@ -2457,7 +2457,7 @@ querySymLinkRetry:
 					   le16_to_cpu(pSMBr->t2.DataOffset);
 
 			/* BB FIXME investigate remapping reserved chars here */
-			*symlinkinfo = cifs_strndup(data_start, count,
+			*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
 						    pSMBr->hdr.Flags2 &
 							SMBFLG2_UNICODE,
 						    nls_codepage);
@@ -3965,8 +3965,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy DfsPath */
 		temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
 		max_len = data_end - temp;
-		node->path_name = cifs_strndup(temp, max_len, is_unicode,
-					       nls_codepage);
+		node->path_name = cifs_strndup_from_ucs(temp, max_len,
+						      is_unicode, nls_codepage);
 		if (IS_ERR(node->path_name)) {
 			rc = PTR_ERR(node->path_name);
 			node->path_name = NULL;
@@ -3976,8 +3976,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy link target UNC */
 		temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
 		max_len = data_end - temp;
-		node->node_name = cifs_strndup(temp, max_len, is_unicode,
-					       nls_codepage);
+		node->node_name = cifs_strndup_from_ucs(temp, max_len,
+						      is_unicode, nls_codepage);
 		if (IS_ERR(node->node_name)) {
 			rc = PTR_ERR(node->node_name);
 			node->node_name = NULL;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 7e5d4fda493..39f5362e2cb 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1,7 +1,7 @@
 /*
  *   fs/cifs/connect.c
  *
- *   Copyright (C) International Business Machines  Corp., 2002,2008
+ *   Copyright (C) International Business Machines  Corp., 2002,2009
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   This library is free software; you can redistribute it and/or modify
@@ -3463,7 +3463,8 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
 
 		/* mostly informational -- no need to fail on error here */
-		tcon->nativeFileSystem = cifs_strndup(bcc_ptr, bytes_left,
+		tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+						      bytes_left,
 						      smb_buffer->Flags2 &
 							 SMBFLG2_UNICODE,
 						      nls_codepage);
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 93022dc9bab..2bcff17047a 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -3,7 +3,7 @@
  *
  *   SMB/CIFS session setup handling routines
  *
- *   Copyright (c) International Business Machines  Corp., 2006, 2007
+ *   Copyright (c) International Business Machines  Corp., 2006, 2009
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   This library is free software; you can redistribute it and/or modify
@@ -300,7 +300,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 	}
 
 	kfree(ses->serverOS);
-	ses->serverOS = cifs_strndup(data, bleft, true, nls_cp);
+	ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, ("serverOS=%s", ses->serverOS));
 	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
 	data += len;
@@ -309,7 +309,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 		return;
 
 	kfree(ses->serverNOS);
-	ses->serverNOS = cifs_strndup(data, bleft, true, nls_cp);
+	ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, ("serverNOS=%s", ses->serverNOS));
 	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
 	data += len;
@@ -318,7 +318,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 		return;
 
 	kfree(ses->serverDomain);
-	ses->serverDomain = cifs_strndup(data, bleft, true, nls_cp);
+	ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, ("serverDomain=%s", ses->serverDomain));
 
 	return;
-- 
GitLab


From 9cba3ccc8fe77b67aff2db8f5827d7cb752ce11f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 30 Apr 2009 17:06:03 +0100
Subject: [PATCH 1042/1421] [ARM] 5488/1: ARM errata: Invalidation of the
 Instruction Cache operation can fail

This patch implements the recommended workaround for erratum 411920
(ARM1136, ARM1156, ARM1176).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig       |  9 +++++++++
 arch/arm/mm/cache-v6.S | 33 +++++++++++++++++++++++++++++++++
 arch/arm/mm/flush.c    | 23 +++++++++++++++++++++--
 3 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 99875dd06f5..e28a76bd179 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -740,6 +740,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_411920
+	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+	depends on CPU_V6 && !SMP
+	help
+	  Invalidation of the Instruction Cache operation can
+	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+	  It does not affect the MPCore. This option enables the ARM Ltd.
+	  recommended workaround.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 2c6c2a7c05a..8f5c13f4c93 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -20,6 +20,31 @@
 #define D_CACHE_LINE_SIZE	32
 #define BTB_FLUSH_SIZE		8
 
+#ifdef CONFIG_ARM_ERRATA_411920
+/*
+ * Invalidate the entire I cache (this code is a workaround for the ARM1136
+ * erratum 411920 - Invalidate Instruction Cache operation can fail. This
+ * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *
+ * Registers:
+ *   r0 - set to 0
+ *   r1 - corrupted
+ */
+ENTRY(v6_icache_inval_all)
+	mov	r0, #0
+	mrs	r1, cpsr
+	cpsid	ifa				@ disable interrupts
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
+	msr	cpsr_cx, r1			@ restore interrupts
+	.rept	11				@ ARM Ltd recommends at least
+	nop					@ 11 NOPs
+	.endr
+	mov	pc, lr
+#endif
+
 /*
  *	v6_flush_cache_all()
  *
@@ -31,7 +56,11 @@ ENTRY(v6_flush_kern_cache_all)
 	mov	r0, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#else
+	b	v6_icache_inval_all
+#endif
 #else
 	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
 #endif
@@ -103,7 +132,11 @@ ENTRY(v6_coherent_user_range)
 	mov	r0, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#else
+	b	v6_icache_inval_all
+#endif
 #else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
 #endif
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 4e283481cee..c07222eb5ce 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -18,6 +18,10 @@
 
 #include "mm.h"
 
+#ifdef CONFIG_ARM_ERRATA_411920
+extern void v6_icache_inval_all(void);
+#endif
+
 #ifdef CONFIG_CPU_CACHE_VIPT
 
 #define ALIAS_FLUSH_START	0xffff4000
@@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 
 	asm(	"mcrr	p15, 0, %1, %0, c14\n"
 	"	mcr	p15, 0, %2, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
 	"	mcr	p15, 0, %2, c7, c5, 0\n"
+#endif
 	    :
 	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+	v6_icache_inval_all();
+#endif
 }
 
 void flush_cache_mm(struct mm_struct *mm)
@@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm)
 
 	if (cache_is_vipt_aliasing()) {
 		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
+		"	mcr	p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
 		"	mcr	p15, 0, %0, c7, c5, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4"
+#endif
 		    :
 		    : "r" (0)
 		    : "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+		v6_icache_inval_all();
+#endif
 	}
 }
 
@@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 
 	if (cache_is_vipt_aliasing()) {
 		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
+		"	mcr	p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
 		"	mcr	p15, 0, %0, c7, c5, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4"
+#endif
 		    :
 		    : "r" (0)
 		    : "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+		v6_icache_inval_all();
+#endif
 	}
 }
 
-- 
GitLab


From 7ce236fcd6fd45b0441a2d49acb2ceb2de2e8a47 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 30 Apr 2009 17:06:09 +0100
Subject: [PATCH 1043/1421] [ARM] 5487/1: ARM errata: Stale prediction on
 replaced interworking branch

This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2)
erratum. The BTAC/BTB is now flushed at every context switch.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig      | 16 ++++++++++++++++
 arch/arm/mm/proc-v7.S |  8 ++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e28a76bd179..84e4816362b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -749,6 +749,22 @@ config ARM_ERRATA_411920
 	  It does not affect the MPCore. This option enables the ARM Ltd.
 	  recommended workaround.
 
+config ARM_ERRATA_430973
+	bool "ARM errata: Stale prediction on replaced interworking branch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 430973 Cortex-A8
+	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+	  interworking branch is replaced with another code sequence at the
+	  same virtual address, whether due to self-modifying code or virtual
+	  to physical address re-mapping, Cortex-A8 does not recover from the
+	  stale interworking branch prediction. This results in Cortex-A8
+	  executing the new code sequence in the incorrect ARM or Thumb state.
+	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+	  and also flushes the branch target cache at every context switch.
+	  Note that setting specific bits in the ACTLR register may not be
+	  available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index d1ebec42521..fc81159596f 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -95,6 +95,9 @@ ENTRY(cpu_v7_switch_mm)
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
 	orr	r0, r0, #TTB_FLAGS
+#ifdef CONFIG_ARM_ERRATA_430973
+	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
+#endif
 	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
 	isb
 1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -180,6 +183,11 @@ __v7_setup:
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+#ifdef CONFIG_ARM_ERRATA_430973
+	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orr	r10, r10, #(1 << 6)		@ set IBE to 1
+	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+#endif
 	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-- 
GitLab


From 855c551f5b8cc3815d58e1056c1f1e7c461e2d24 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 30 Apr 2009 17:06:15 +0100
Subject: [PATCH 1044/1421] [ARM] 5490/1: ARM errata: Processor deadlock when a
 false hazard is created

This patch adds a workaround for the 458693 Cortex-A8 (r2p0)
erratum. It sets the corresponding bits in the auxiliary control
register so that the PLD instruction becomes a NOP.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig      | 13 +++++++++++++
 arch/arm/mm/proc-v7.S |  6 ++++++
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 84e4816362b..49f85664083 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -765,6 +765,19 @@ config ARM_ERRATA_430973
 	  Note that setting specific bits in the ACTLR register may not be
 	  available in non-secure mode.
 
+config ARM_ERRATA_458693
+	bool "ARM errata: Processor deadlock when a false hazard is created"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+	  erratum. For very specific sequences of memory operations, it is
+	  possible for a hazard condition intended for a cache line to instead
+	  be incorrectly associated with a different cache line. This false
+	  hazard might then cause a processor deadlock. The workaround enables
+	  the L1 caching of the NEON accesses and disables the PLD instruction
+	  in the ACTLR register. Note that setting specific bits in the ACTLR
+	  register may not be available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index fc81159596f..370baa7a0f0 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -187,6 +187,12 @@ __v7_setup:
 	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
 	orr	r10, r10, #(1 << 6)		@ set IBE to 1
 	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_458693
+	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
+	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
+	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 	mov	r10, #0
 #ifdef HARVARD_CACHE
-- 
GitLab


From 0516e4643cd22fc9f535aef02ad1de66c382c93b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 30 Apr 2009 17:06:20 +0100
Subject: [PATCH 1045/1421] [ARM] 5489/1: ARM errata: Data written to the L2
 cache can be overwritten with stale data

This patch is a workaround for the 460075 Cortex-A8 (r2p0) erratum. It
configures the L2 cache auxiliary control register so that the Write
Allocate mode for the L2 cache is disabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig      | 12 ++++++++++++
 arch/arm/mm/proc-v7.S |  5 +++++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 49f85664083..9faccc411c2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -778,6 +778,18 @@ config ARM_ERRATA_458693
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
 	  register may not be available in non-secure mode.
 
+config ARM_ERRATA_460075
+	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+	  erratum. Any asynchronous access to the L2 cache may encounter a
+	  situation in which recent store transactions to the L2 cache are lost
+	  and overwritten with stale memory contents from external memory. The
+	  workaround disables the write-allocate mode for the L2 cache via the
+	  ACTLR register. Note that setting specific bits in the ACTLR register
+	  may not be available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 370baa7a0f0..f2305441e7d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -193,6 +193,11 @@ __v7_setup:
 	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
 	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
 	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_460075
+	mrc	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
+	orr	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
+	mcr	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
 	mov	r10, #0
 #ifdef HARVARD_CACHE
-- 
GitLab


From dfa13f39b798fee68250abe1aed851395c8b51b5 Mon Sep 17 00:00:00 2001
From: Joel Becker <joel.becker@oracle.com>
Date: Wed, 29 Apr 2009 17:55:08 -0700
Subject: [PATCH 1046/1421] ocfs2: Fix a missing credit when deleting from
 indexed directories.

The ocfs2 directory index updates two blocks when we remove an entry -
the dx root and the dx leaf.  OCFS2_DELETE_INODE_CREDITS was only
accounting for the dx leaf.  This shows up when ocfs2_delete_inode()
runs out of credits in jbd2_journal_dirty_metadata() at
"J_ASSERT_JH(jh, handle->h_buffer_credits > 0);".

The test that caught this was running dirop_file_racer from the
ocfs2-test suite with a 250-character filename PREFIX.  Run on a 512B
blocksize, it forces the orphan dir index to grow large enough to
trigger.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/journal.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 619dd7f6c05..eb7b76331eb 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -437,8 +437,9 @@ static inline int ocfs2_unlink_credits(struct super_block *sb)
 }
 
 /* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry +
- * inode alloc group descriptor + orphan dir index leaf */
-#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3)
+ * inode alloc group descriptor + orphan dir index root +
+ * orphan dir index leaf */
+#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4)
 
 /* dinode update, old dir dinode update, new dir dinode update, old
  * dir dir entry, new dir dir entry, dir entry update for renaming
-- 
GitLab


From 2191aebaf9af9125bfee32808babe6f61446c8a6 Mon Sep 17 00:00:00 2001
From: Joel Becker <joel.becker@oracle.com>
Date: Fri, 17 Apr 2009 15:58:50 -0700
Subject: [PATCH 1047/1421] ocfs2: Change repository in MAINTAINERS.

The ocfs2.git repository is moving to my kernel.org account.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index c3b215970f7..7625387ac8b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3335,7 +3335,7 @@ P:	Joel Becker
 M:	joel.becker@oracle.com
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://oss.oracle.com/projects/ocfs2/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
 S:	Supported
 
 ORINOCO DRIVER
-- 
GitLab


From 9e39b0ae8af46c83b85dae7ff5251911a80fce5a Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 30 Apr 2009 21:31:15 +0000
Subject: [PATCH 1048/1421] [CIFS] Remove unneeded QuerySymlink call and fix
 mapping for unmapped status

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 2 --
 fs/cifs/link.c    | 9 ++-------
 fs/cifs/netmisc.c | 2 ++
 fs/cifs/nterr.h   | 9 +++++++--
 fs/cifs/smberr.h  | 1 +
 5 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 39f5362e2cb..9d2ebab53db 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3509,8 +3509,6 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 					   struct nls_table *nls_info)
 {
 	int rc = 0;
-	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
-	bool ntlmv2_flag = false;
 	int first_time = 0;
 	struct TCP_Server_Info *server = pSesInfo->server;
 
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index e17a092f43e..eb2fbbe865d 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -257,13 +257,8 @@ cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
 
 /* BB add read reparse point symlink code and
 	Unix extensions symlink code here BB */
-/* We could disable this based on pTcon->unix_ext flag instead ... but why? */
-	if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
-		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-				tmpbuffer,
-				len - 1,
-				cifs_sb->local_nls);
-	else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
 		cERROR(1, ("SFU style symlinks not implemented yet"));
 		/* add open and read as in fs/cifs/inode.c */
 	} else {
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8703d68f5b2..e2fe998989a 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -79,6 +79,7 @@ static const struct smb_to_posix_error mapping_table_ERRDOS[] = {
 	{ErrQuota, -EDQUOT},
 	{ErrNotALink, -ENOLINK},
 	{ERRnetlogonNotStarted, -ENOPROTOOPT},
+	{ERRsymlink, -EOPNOTSUPP},
 	{ErrTooManyLinks, -EMLINK},
 	{0, 0}
 };
@@ -714,6 +715,7 @@ static const struct {
 	ERRDOS, ERRnoaccess, 0xc000028f}, {
 	ERRDOS, ERRnoaccess, 0xc0000290}, {
 	ERRDOS, ERRbadfunc, 0xc000029c}, {
+	ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
 	ERRDOS, ERRinvlevel, 0x007c0001}, };
 
 /*****************************************************************************
diff --git a/fs/cifs/nterr.h b/fs/cifs/nterr.h
index 588abbb9d08..257267367d4 100644
--- a/fs/cifs/nterr.h
+++ b/fs/cifs/nterr.h
@@ -35,8 +35,6 @@ struct nt_err_code_struct {
 extern const struct nt_err_code_struct nt_errs[];
 
 /* Win32 Status codes. */
-
-#define STATUS_BUFFER_OVERFLOW            0x80000005
 #define STATUS_MORE_ENTRIES               0x0105
 #define ERROR_INVALID_PARAMETER		  0x0057
 #define ERROR_INSUFFICIENT_BUFFER	  0x007a
@@ -50,6 +48,13 @@ extern const struct nt_err_code_struct nt_errs[];
 #define STATUS_SOME_UNMAPPED       0x0107
 #define STATUS_BUFFER_OVERFLOW     0x80000005
 #define NT_STATUS_NO_MORE_ENTRIES  0x8000001a
+#define NT_STATUS_MEDIA_CHANGED    0x8000001c
+#define NT_STATUS_END_OF_MEDIA     0x8000001e
+#define NT_STATUS_MEDIA_CHECK      0x80000020
+#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
+#define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
 #define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
 #define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
 #define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index 7f50e8577c1..c5084d27db7 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -110,6 +110,7 @@
 
 /* Below errors are used internally (do not come over the wire) for passthrough
    from STATUS codes to POSIX only  */
+#define ERRsymlink              0xFFFD
 #define ErrTooManyLinks         0xFFFE
 
 /* Following error codes may be generated with the ERRSRV error class.*/
-- 
GitLab


From 049ef7e40fc9959db480b2753a1dbe734d98e948 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 30 Apr 2009 14:43:43 -0700
Subject: [PATCH 1049/1421] drm/i915: x86 always has writeq. Add I915_READ64
 for symmetry.

i386 has inline code for writeq and readq, so just use those instead of ugly
macros which evaluate arguments multiple times.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 25065923b8a..df08eb4240b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -705,13 +705,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev);
 #define I915_WRITE16(reg, val)	writel(val, dev_priv->regs + (reg))
 #define I915_READ8(reg)		readb(dev_priv->regs + (reg))
 #define I915_WRITE8(reg, val)	writeb(val, dev_priv->regs + (reg))
-#ifdef writeq
 #define I915_WRITE64(reg, val)	writeq(val, dev_priv->regs + (reg))
-#else
-#define I915_WRITE64(reg, val)	(writel(val, dev_priv->regs + (reg)), \
-				 writel(upper_32_bits(val), dev_priv->regs + \
-					(reg) + 4))
-#endif
+#define I915_READ64(reg)	readq(dev_priv->regs + (reg))
 #define POSTING_READ(reg)	(void)I915_READ(reg)
 
 #define I915_VERBOSE 0
-- 
GitLab


From 79f11c19a396e8cea7dad322dcfb46c0a8517fe6 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 30 Apr 2009 14:43:44 -0700
Subject: [PATCH 1050/1421] drm/i915: save/restore fence registers across
 suspend/resume

This makes software fallbacks not do tiling wrong on i965 and later after
resume. It also should fix 945 performance reduction after resume which
would have disabled tiling without causing any visible effect.

Signed-off-by: Keith Packard <keithp@keithp.com>
[anholt: Fixed up the 915 case to not save/restore the new regs]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h     |  1 +
 drivers/gpu/drm/i915/i915_suspend.c | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index df08eb4240b..b47af07f391 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,7 @@ typedef struct drm_i915_private {
 	u8 saveAR[21];
 	u8 saveDACMASK;
 	u8 saveCR[37];
+	uint64_t saveFENCE[16];
 
 	struct {
 		struct drm_mm gtt_space;
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index d669cc2b42c..ce8a21344a7 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -349,6 +349,18 @@ int i915_save_state(struct drm_device *dev)
 	for (i = 0; i < 3; i++)
 		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
 
+	/* Fences */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+	} else {
+		for (i = 0; i < 8; i++)
+			dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+	}
 	i915_save_vga(dev);
 
 	return 0;
@@ -371,6 +383,18 @@ int i915_restore_state(struct drm_device *dev)
 	/* Display arbitration */
 	I915_WRITE(DSPARB, dev_priv->saveDSPARB);
 
+	/* Fences */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+	}
+
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
-- 
GitLab


From 18295796a30cada84e933d805072dc2248d54f98 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 20:45:45 -0400
Subject: [PATCH 1051/1421] cifs: fix length handling in
 cifs_get_name_from_search_buf

The earlier patch to move this code to use the new unicode helpers
assumed that the filename strings would be null terminated. That's not
always the case.

Instead of passing "max_len" to the string converter, pass "min(len,
max_len)", which makes it do the right thing while still keeping the
parser confined to the response. Also fix up the prototypes of this
function and the callers so that max_len is unsigned (like len is).

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/readdir.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index e1351fe18a1..5bc9ab7586b 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -829,7 +829,7 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
 /* inode num, inode type and filename returned */
 static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	char *current_entry, __u16 level, unsigned int unicode,
-	struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
+	struct cifs_sb_info *cifs_sb, unsigned int max_len, __u64 *pinum)
 {
 	int rc = 0;
 	unsigned int len = 0;
@@ -890,7 +890,8 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	if (unicode) {
 		pqst->len = cifs_from_ucs2((char *) pqst->name,
 					   (__le16 *) filename,
-					   UNICODE_NAME_MAX, max_len, nlt,
+					   UNICODE_NAME_MAX,
+					   min(len, max_len), nlt,
 					   cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 	} else {
@@ -902,8 +903,8 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	return rc;
 }
 
-static int cifs_filldir(char *pfindEntry, struct file *file,
-	filldir_t filldir, void *direntry, char *scratch_buf, int max_len)
+static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
+			void *direntry, char *scratch_buf, unsigned int max_len)
 {
 	int rc = 0;
 	struct qstr qstring;
@@ -1000,7 +1001,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 	int num_to_fill = 0;
 	char *tmp_buf = NULL;
 	char *end_of_smb;
-	int max_len;
+	unsigned int max_len;
 
 	xid = GetXid();
 
-- 
GitLab


From cf398e3a117b2b63da724c2365d53ce31bd7240a Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 03:50:42 +0000
Subject: [PATCH 1052/1421] [CIFS] Fix build warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_dfs_ref.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 896b08fb1ec..83d62759c7c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -340,9 +340,9 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 		cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 	for (i = 0; i < num_referrals; i++) {
+		int len;
 		dump_referral(referrals+i);
 		/* connect to a node */
-		int len;
 		len = strlen(referrals[i].node_name);
 		if (len < 2) {
 			cERROR(1, ("%s: Net Address path too short: %s",
-- 
GitLab


From e14b2fe1e64d3e4bd2f328ff9d1969f318f55954 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 04:37:43 +0000
Subject: [PATCH 1053/1421] [CIFS] Add remaining ntlmssp flags and standardize
 field names

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 30 ++++++++++-----------
 fs/cifs/ntlmssp.h | 68 +++++++++++++++++++++++++++++------------------
 2 files changed, 57 insertions(+), 41 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 9d2ebab53db..5bce2778163 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2686,13 +2686,13 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 	/* setup pointers to domain name and workstation name */
 	bcc_ptr += SecurityBlobLength;
 
-	SecurityBlob->WorkstationName.Buffer = 0;
+	SecurityBlob->WorkstationName.BufferOffset = 0;
 	SecurityBlob->WorkstationName.Length = 0;
 	SecurityBlob->WorkstationName.MaximumLength = 0;
 
 	/* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
 	along with username on auth request (ie the response to challenge) */
-	SecurityBlob->DomainName.Buffer = 0;
+	SecurityBlob->DomainName.BufferOffset = 0;
 	SecurityBlob->DomainName.Length = 0;
 	SecurityBlob->DomainName.MaximumLength = 0;
 	if (ses->capabilities & CAP_UNICODE) {
@@ -3020,30 +3020,30 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 
 /* setup pointers to domain name and workstation name */
 
-	SecurityBlob->WorkstationName.Buffer = 0;
+	SecurityBlob->WorkstationName.BufferOffset = 0;
 	SecurityBlob->WorkstationName.Length = 0;
 	SecurityBlob->WorkstationName.MaximumLength = 0;
 	SecurityBlob->SessionKey.Length = 0;
 	SecurityBlob->SessionKey.MaximumLength = 0;
-	SecurityBlob->SessionKey.Buffer = 0;
+	SecurityBlob->SessionKey.BufferOffset = 0;
 
 	SecurityBlob->LmChallengeResponse.Length = 0;
 	SecurityBlob->LmChallengeResponse.MaximumLength = 0;
-	SecurityBlob->LmChallengeResponse.Buffer = 0;
+	SecurityBlob->LmChallengeResponse.BufferOffset = 0;
 
 	SecurityBlob->NtChallengeResponse.Length =
 	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
 	SecurityBlob->NtChallengeResponse.MaximumLength =
 	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
 	memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
-	SecurityBlob->NtChallengeResponse.Buffer =
+	SecurityBlob->NtChallengeResponse.BufferOffset =
 	    cpu_to_le32(SecurityBlobLength);
 	SecurityBlobLength += CIFS_SESS_KEY_SIZE;
 	bcc_ptr += CIFS_SESS_KEY_SIZE;
 
 	if (ses->capabilities & CAP_UNICODE) {
 		if (domain == NULL) {
-			SecurityBlob->DomainName.Buffer = 0;
+			SecurityBlob->DomainName.BufferOffset = 0;
 			SecurityBlob->DomainName.Length = 0;
 			SecurityBlob->DomainName.MaximumLength = 0;
 		} else {
@@ -3052,14 +3052,14 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			ln *= 2;
 			SecurityBlob->DomainName.MaximumLength =
 			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.Buffer =
+			SecurityBlob->DomainName.BufferOffset =
 			    cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
 			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
 		}
 		if (user == NULL) {
-			SecurityBlob->UserName.Buffer = 0;
+			SecurityBlob->UserName.BufferOffset = 0;
 			SecurityBlob->UserName.Length = 0;
 			SecurityBlob->UserName.MaximumLength = 0;
 		} else {
@@ -3068,7 +3068,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			ln *= 2;
 			SecurityBlob->UserName.MaximumLength =
 			    cpu_to_le16(ln);
-			SecurityBlob->UserName.Buffer =
+			SecurityBlob->UserName.BufferOffset =
 			    cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
@@ -3080,7 +3080,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 		   SecurityBlob->WorkstationName.Length *= 2;
 		   SecurityBlob->WorkstationName.MaximumLength =
 			cpu_to_le16(SecurityBlob->WorkstationName.Length);
-		   SecurityBlob->WorkstationName.Buffer =
+		   SecurityBlob->WorkstationName.BufferOffset =
 				 cpu_to_le32(SecurityBlobLength);
 		   bcc_ptr += SecurityBlob->WorkstationName.Length;
 		   SecurityBlobLength += SecurityBlob->WorkstationName.Length;
@@ -3112,7 +3112,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 		bcc_ptr += 2;	/* null domain */
 	} else {		/* ASCII */
 		if (domain == NULL) {
-			SecurityBlob->DomainName.Buffer = 0;
+			SecurityBlob->DomainName.BufferOffset = 0;
 			SecurityBlob->DomainName.Length = 0;
 			SecurityBlob->DomainName.MaximumLength = 0;
 		} else {
@@ -3122,14 +3122,14 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			ln = strnlen(domain, 64);
 			SecurityBlob->DomainName.MaximumLength =
 			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.Buffer =
+			SecurityBlob->DomainName.BufferOffset =
 			    cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
 			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
 		}
 		if (user == NULL) {
-			SecurityBlob->UserName.Buffer = 0;
+			SecurityBlob->UserName.BufferOffset = 0;
 			SecurityBlob->UserName.Length = 0;
 			SecurityBlob->UserName.MaximumLength = 0;
 		} else {
@@ -3137,7 +3137,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			strncpy(bcc_ptr, user, 63);
 			ln = strnlen(user, 64);
 			SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
-			SecurityBlob->UserName.Buffer =
+			SecurityBlob->UserName.BufferOffset =
 						cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index c377d8065d9..49c9a4e7531 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -27,29 +27,39 @@
 #define UnknownMessage    cpu_to_le32(8)
 
 /* Negotiate Flags */
-#define NTLMSSP_NEGOTIATE_UNICODE       0x01 /* Text strings are in unicode */
-#define NTLMSSP_NEGOTIATE_OEM           0x02 /* Text strings are in OEM */
-#define NTLMSSP_REQUEST_TARGET          0x04 /* Server return its auth realm */
-#define NTLMSSP_NEGOTIATE_SIGN        0x0010 /* Request signature capability */
-#define NTLMSSP_NEGOTIATE_SEAL        0x0020 /*  Request confidentiality */
-#define NTLMSSP_NEGOTIATE_DGRAM       0x0040
-#define NTLMSSP_NEGOTIATE_LM_KEY      0x0080 /* Sign/seal use LM session key */
-#define NTLMSSP_NEGOTIATE_NTLM        0x0200 /* NTLM authentication */
-#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
+#define NTLMSSP_NEGOTIATE_UNICODE         0x01 /* Text strings are unicode */
+#define NTLMSSP_NEGOTIATE_OEM             0x02 /* Text strings are in OEM */
+#define NTLMSSP_REQUEST_TARGET            0x04 /* Srv returns its auth realm */
+/* define reserved9                       0x08 */
+#define NTLMSSP_NEGOTIATE_SIGN          0x0010 /* Request signing capability */
+#define NTLMSSP_NEGOTIATE_SEAL          0x0020 /* Request confidentiality */
+#define NTLMSSP_NEGOTIATE_DGRAM         0x0040
+#define NTLMSSP_NEGOTIATE_LM_KEY        0x0080 /* Use LM session key */
+/* defined reserved 8                   0x0100 */
+#define NTLMSSP_NEGOTIATE_NTLM          0x0200 /* NTLM authentication */
+#define NTLMSSP_NEGOTIATE_NT_ONLY       0x0400 /* Lanman not allowed */
+#define NTLMSSP_ANONYMOUS               0x0800
+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000 /* reserved6 */
 #define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-#define NTLMSSP_NEGOTIATE_LOCAL_CALL  0x4000 /* client/server on same machine */
-#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign for all security levels */
-#define NTLMSSP_TARGET_TYPE_DOMAIN   0x10000
-#define NTLMSSP_TARGET_TYPE_SERVER   0x20000
-#define NTLMSSP_TARGET_TYPE_SHARE    0x40000
-#define NTLMSSP_NEGOTIATE_NTLMV2     0x80000
-#define NTLMSSP_REQUEST_INIT_RESP   0x100000
-#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-#define NTLMSSP_REQUEST_NOT_NT_KEY  0x400000
+#define NTLMSSP_NEGOTIATE_LOCAL_CALL    0x4000 /* client/server same machine */
+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN   0x8000 /* Sign. All security levels  */
+#define NTLMSSP_TARGET_TYPE_DOMAIN     0x10000
+#define NTLMSSP_TARGET_TYPE_SERVER     0x20000
+#define NTLMSSP_TARGET_TYPE_SHARE      0x40000
+#define NTLMSSP_NEGOTIATE_EXTENDED_SEC 0x80000 /* NB:not related to NTLMv2 pwd*/
+/* #define NTLMSSP_REQUEST_INIT_RESP     0x100000 */
+#define NTLMSSP_NEGOTIATE_IDENTIFY    0x100000
+#define NTLMSSP_REQUEST_ACCEPT_RESP   0x200000 /* reserved5 */
+#define NTLMSSP_REQUEST_NON_NT_KEY    0x400000
 #define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-#define NTLMSSP_NEGOTIATE_128     0x20000000
-#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-#define NTLMSSP_NEGOTIATE_56      0x80000000
+/* #define reserved4                 0x1000000 */
+#define NTLMSSP_NEGOTIATE_VERSION    0x2000000 /* we do not set */
+/* #define reserved3                 0x4000000 */
+/* #define reserved2                 0x8000000 */
+/* #define reserved1                0x10000000 */
+#define NTLMSSP_NEGOTIATE_128       0x20000000
+#define NTLMSSP_NEGOTIATE_KEY_XCH   0x40000000
+#define NTLMSSP_NEGOTIATE_56        0x80000000
 
 /* Although typedefs are not commonly used for structure definitions */
 /* in the Linux kernel, in this particular case they are useful      */
@@ -60,32 +70,36 @@
 typedef struct _SECURITY_BUFFER {
 	__le16 Length;
 	__le16 MaximumLength;
-	__le32 Buffer;		/* offset to buffer */
+	__le32 BufferOffset;	/* offset to buffer */
 } __attribute__((packed)) SECURITY_BUFFER;
 
 typedef struct _NEGOTIATE_MESSAGE {
 	__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
-	__le32 MessageType;     /* 1 */
+	__le32 MessageType;     /* NtLmNegotiate = 1 */
 	__le32 NegotiateFlags;
 	SECURITY_BUFFER DomainName;	/* RFC 1001 style and ASCII */
 	SECURITY_BUFFER WorkstationName;	/* RFC 1001 and ASCII */
+	/* SECURITY_BUFFER for version info not present since we
+	   do not set the version is present flag */
 	char DomainString[0];
 	/* followed by WorkstationString */
 } __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
 
 typedef struct _CHALLENGE_MESSAGE {
 	__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
-	__le32 MessageType;   /* 2 */
+	__le32 MessageType;   /* NtLmChallenge = 2 */
 	SECURITY_BUFFER TargetName;
 	__le32 NegotiateFlags;
 	__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
 	__u8 Reserved[8];
 	SECURITY_BUFFER TargetInfoArray;
+	/* SECURITY_BUFFER for version info not present since we
+	   do not set the version is present flag */
 } __attribute__((packed)) CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
 
 typedef struct _AUTHENTICATE_MESSAGE {
-	__u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
-	__le32 MessageType;  /* 3 */
+	__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
+	__le32 MessageType;  /* NtLmsAuthenticate = 3 */
 	SECURITY_BUFFER LmChallengeResponse;
 	SECURITY_BUFFER NtChallengeResponse;
 	SECURITY_BUFFER DomainName;
@@ -93,5 +107,7 @@ typedef struct _AUTHENTICATE_MESSAGE {
 	SECURITY_BUFFER WorkstationName;
 	SECURITY_BUFFER SessionKey;
 	__le32 NegotiateFlags;
+	/* SECURITY_BUFFER for version info not present since we
+	   do not set the version is present flag */
 	char UserString[0];
 } __attribute__((packed)) AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
-- 
GitLab


From 79af6c49a93ea80952fd42dc180c8827cd8c984c Mon Sep 17 00:00:00 2001
From: Michael Wolf <mjw@linux.vnet.ibm.com>
Date: Mon, 27 Apr 2009 06:17:54 +0000
Subject: [PATCH 1054/1421] powerpc adjust oprofile_cpu_type version 3

Oprofile is changing the naming it is using for the compatibility modes.
Instead of having compat-power<x>, oprofile will go to family naming
convention and use ibm-compat-v<x>.  Currently only ibm-compat-v1 will
be defined.
The notion of compatibility events just started with POWER6. So there is
no way that any other tool could exist that is using these
oprofile_cpu_type strings we want to change.

Signed-off-by: Mike Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cd1b687544f..5e925dbffbf 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
-		.oprofile_cpu_type	= "ppc64/compat-power5+",
+		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
-		.oprofile_cpu_type	= "ppc64/compat-power6",
+		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power6",
 	},
 	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
-		.oprofile_cpu_type	= "ppc64/compat-power7",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.platform		= "power7",
 	},
 	{	/* Power7 */
@@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
 		 * and, in that case, keep the current value for
 		 * oprofile_cpu_type.
 		 */
-		if (old.oprofile_cpu_type == NULL)
+		if (old.oprofile_cpu_type == NULL) {
 			t->oprofile_cpu_type = s->oprofile_cpu_type;
+			t->oprofile_type = s->oprofile_type;
+		}
 	}
 
 	*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
-- 
GitLab


From 9d37a90f9c5271440c8f62b4adc71a726b4b86b6 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 28 Apr 2009 06:50:15 +0000
Subject: [PATCH 1055/1421] powerpc: Update MPC5xxx and Xilinx Virtex
 maintainer entries

- Add git tree URLs
- Drop Sylvain from the 5xxx maintainers list.  He hasn't been active
  for a while now.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index c547f4a2bb6..30cc6af4661 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3434,11 +3434,10 @@ L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:	Sylvain Munaut
-M:	tnt@246tNt.com
 P:	Grant Likely
 M:	grant.likely@secretlab.ca
 L:	linuxppc-dev@ozlabs.org
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
@@ -3456,6 +3455,7 @@ P:	Grant Likely
 M:	grant.likely@secretlab.ca
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:	linuxppc-dev@ozlabs.org
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
-- 
GitLab


From 0203d6ec4e88062f20558fbed3cdff2af758a53b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 29 Apr 2009 19:39:38 +0000
Subject: [PATCH 1056/1421] powerpc: Fix setting of oprofile cpu type

commit 2657dd4e301d4841ed67a4fac7d145ad8f3e1b28 introduced a
bug where we would now always override the "real" oprofile CPU
type with the "compatible" one provided by a pseudo-PVR in the
device-tree which is incorrect and breaks oprofile on all current
configs since the "compatible" ones aren't yet recognized.

This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 5e925dbffbf..f9c40f869c6 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1837,8 +1837,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
 		 * oprofile_cpu_type.
 		 */
 		if (old.oprofile_cpu_type == NULL) {
-			t->oprofile_cpu_type = s->oprofile_cpu_type;
-			t->oprofile_type = s->oprofile_type;
+			t->oprofile_cpu_type = old.oprofile_cpu_type;
+			t->oprofile_type = old.oprofile_type;
 		}
 	}
 
-- 
GitLab


From 0e0d2cf32743c660aab20e40aeb2155c06a256db Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 05:27:32 +0000
Subject: [PATCH 1057/1421] [CIFS] Remove sparse endian warnings

Removes two sparse CHECK_ENDIAN warnings from Jeffs earlier patch,
and removes the dead readlink code (after noting where in
findfirst we will need to add something like that in the future
to handle the newly discovered unexpected error on FindFirst of NTFS symlinks.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 14 +++++---
 fs/cifs/connect.c | 23 +++++++------
 fs/cifs/link.c    | 87 -----------------------------------------------
 fs/cifs/readdir.c | 37 +++++++++++++++++++-
 4 files changed, 58 insertions(+), 103 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index df5276e628b..b968e5bd7df 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2451,16 +2451,20 @@ querySymLinkRetry:
 		if (rc || (pSMBr->ByteCount < 2))
 			rc = -EIO;
 		else {
+			bool is_unicode;
 			u16 count = le16_to_cpu(pSMBr->t2.DataCount);
 
 			data_start = ((char *) &pSMBr->hdr.Protocol) +
 					   le16_to_cpu(pSMBr->t2.DataOffset);
 
+			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+				is_unicode = true;
+			else
+				is_unicode = false;
+
 			/* BB FIXME investigate remapping reserved chars here */
 			*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
-						    pSMBr->hdr.Flags2 &
-							SMBFLG2_UNICODE,
-						    nls_codepage);
+						    is_unicode, nls_codepage);
 			if (!symlinkinfo)
 				rc = -ENOMEM;
 		}
@@ -3930,7 +3934,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 
 	cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
 			*num_of_nodes,
-			le16_to_cpu(pSMBr->DFSFlags)));
+			le32_to_cpu(pSMBr->DFSFlags)));
 
 	*target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
 			*num_of_nodes, GFP_KERNEL);
@@ -3946,7 +3950,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		int max_len;
 		struct dfs_info3_param *node = (*target_nodes)+i;
 
-		node->flags = le16_to_cpu(pSMBr->DFSFlags);
+		node->flags = le32_to_cpu(pSMBr->DFSFlags);
 		if (is_unicode) {
 			__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
 						GFP_KERNEL);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 5bce2778163..9dcdb0c707e 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2681,8 +2681,6 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 	    /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
 	if (sign_CIFS_PDUs)
 		negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-/*	if (ntlmv2_support)
-		negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;*/
 	/* setup pointers to domain name and workstation name */
 	bcc_ptr += SecurityBlobLength;
 
@@ -2780,9 +2778,10 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 				memcpy(ses->server->cryptKey,
 				       SecurityBlob2->Challenge,
 				       CIFS_CRYPTO_KEY_SIZE);
-				if (SecurityBlob2->NegotiateFlags &
+/* NTLMV2 flag is not for NTLMv2 password hash */
+/*				if (SecurityBlob2->NegotiateFlags &
 					cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
-					*pNTLMv2_flag = true;
+					*pNTLMv2_flag = true; */ /* BB wrong */
 
 				if ((SecurityBlob2->NegotiateFlags &
 					cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
@@ -3012,11 +3011,10 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 	bcc_ptr += SecurityBlobLength;
 	negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
 			NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
-			0x80000000 | NTLMSSP_NEGOTIATE_128;
+			NTLMSSP_NEGOTIATE_56 | NTLMSSP_NEGOTIATE_128 |
+			NTLMSSP_NEGOTIATE_EXTENDED_SEC;
 	if (sign_CIFS_PDUs)
 		negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
-	if (ntlmv2_flag)
-		negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;
 
 /* setup pointers to domain name and workstation name */
 
@@ -3438,12 +3436,19 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 
 	/* above now done in SendReceive */
 	if ((rc == 0) && (tcon != NULL)) {
+		bool is_unicode;
+
 		tcon->tidStatus = CifsGood;
 		tcon->need_reconnect = false;
 		tcon->tid = smb_buffer_response->Tid;
 		bcc_ptr = pByteArea(smb_buffer_response);
 		bytes_left = BCC(smb_buffer_response);
 		length = strnlen(bcc_ptr, bytes_left - 2);
+		if (smb_buffer->Flags2 & SMBFLG2_UNICODE)
+			is_unicode = true;
+		else
+			is_unicode = false;
+
 
 		/* skip service field (NB: this field is always ASCII) */
 		if (length == 3) {
@@ -3464,9 +3469,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 
 		/* mostly informational -- no need to fail on error here */
 		tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
-						      bytes_left,
-						      smb_buffer->Flags2 &
-							 SMBFLG2_UNICODE,
+						      bytes_left, is_unicode,
 						      nls_codepage);
 
 		cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index eb2fbbe865d..ea9d11e3dcb 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -212,93 +212,6 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
 	return rc;
 }
 
-int
-cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
-{
-	struct inode *inode = direntry->d_inode;
-	int rc = -EACCES;
-	int xid;
-	int oplock = 0;
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
-	char *full_path = NULL;
-	char *tmpbuffer;
-	int len;
-	__u16 fid;
-
-	xid = GetXid();
-	cifs_sb = CIFS_SB(inode->i_sb);
-	pTcon = cifs_sb->tcon;
-
-/* BB would it be safe against deadlock to grab this sem
-      even though rename itself grabs the sem and calls lookup? */
-/*       mutex_lock(&inode->i_sb->s_vfs_rename_mutex);*/
-	full_path = build_path_from_dentry(direntry);
-/*       mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);*/
-
-	if (full_path == NULL) {
-		FreeXid(xid);
-		return -ENOMEM;
-	}
-
-	cFYI(1,
-	     ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
-	      full_path, inode, pBuffer, buflen));
-	if (buflen > PATH_MAX)
-		len = PATH_MAX;
-	else
-		len = buflen;
-	tmpbuffer = kmalloc(len, GFP_KERNEL);
-	if (tmpbuffer == NULL) {
-		kfree(full_path);
-		FreeXid(xid);
-		return -ENOMEM;
-	}
-
-/* BB add read reparse point symlink code and
-	Unix extensions symlink code here BB */
-
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
-		cERROR(1, ("SFU style symlinks not implemented yet"));
-		/* add open and read as in fs/cifs/inode.c */
-	} else {
-		rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
-				OPEN_REPARSE_POINT, &fid, &oplock, NULL,
-				cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
-		if (!rc) {
-			rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
-				tmpbuffer,
-				len - 1,
-				fid,
-				cifs_sb->local_nls);
-			if (CIFSSMBClose(xid, pTcon, fid)) {
-				cFYI(1, ("Error closing junction point "
-					 "(open for ioctl)"));
-			}
-			/* If it is a DFS junction earlier we would have gotten
-			   PATH_NOT_COVERED returned from server so we do
-			   not need to request the DFS info here */
-		}
-	}
-	/* BB Anything else to do to handle recursive links? */
-	/* BB Should we be using page ops here? */
-
-	/* BB null terminate returned string in pBuffer? BB */
-	if (rc == 0) {
-		rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
-		cFYI(1,
-		     ("vfs_readlink called from cifs_readlink returned %d",
-		      rc));
-	}
-
-	kfree(tmpbuffer);
-	kfree(full_path);
-	FreeXid(xid);
-	return rc;
-}
-
 void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
 {
 	char *p = nd_get_link(nd);
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 5bc9ab7586b..df003fe3710 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -445,6 +445,38 @@ static void unix_fill_in_inode(struct inode *tmp_inode,
 	}
 }
 
+/* BB eventually need to add the following helper function to
+      resolve NT_STATUS_STOPPED_ON_SYMLINK return code when
+      we try to do FindFirst on (NTFS) directory symlinks */
+/*
+int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb,
+			     int xid)
+{
+	__u16 fid;
+	int len;
+	int oplock = 0;
+	int rc;
+	struct cifsTconInfo *ptcon = cifs_sb->tcon;
+	char *tmpbuffer;
+
+	rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ,
+			OPEN_REPARSE_POINT, &fid, &oplock, NULL,
+			cifs_sb->local_nls,
+			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+	if (!rc) {
+		tmpbuffer = kmalloc(maxpath);
+		rc = CIFSSMBQueryReparseLinkInfo(xid, ptcon, full_path,
+				tmpbuffer,
+				maxpath -1,
+				fid,
+				cifs_sb->local_nls);
+		if (CIFSSMBClose(xid, ptcon, fid)) {
+			cFYI(1, ("Error closing temporary reparsepoint open)"));
+		}
+	}
+}
+ */
+
 static int initiate_cifs_search(const int xid, struct file *file)
 {
 	int rc = 0;
@@ -500,7 +532,10 @@ ffirst_retry:
 			CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
 	if (rc == 0)
 		cifsFile->invalidHandle = false;
-	if ((rc == -EOPNOTSUPP) &&
+	/* BB add following call to handle readdir on new NTFS symlink errors 
+	else if STATUS_STOPPED_ON_SYMLINK
+		call get_symlink_reparse_path and retry with new path */
+	else if ((rc == -EOPNOTSUPP) &&
 		(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
 		cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
 		goto ffirst_retry;
-- 
GitLab


From c520f72172814c202ee47c51a63a1b1dde7f22f2 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 20 Apr 2009 20:02:16 +0200
Subject: [PATCH 1058/1421] avr32: drop unused CLEAN_FILES

Left over from before we used arch/avr32/include

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/avr32/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 0b97e14f73f..c21a3290d54 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -43,8 +43,6 @@ core-y					+= arch/avr32/mm/
 drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 libs-y					+= arch/avr32/lib/
 
-CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
-
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
 
 .PHONY: $(BOOT_TARGETS) install
-- 
GitLab


From 0c56042adc02fa460a2d6bc507a1e3f9bde326fc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Bri=C3=A8re?= <fbriere@fbriere.net>
Date: Sun, 19 Apr 2009 12:58:40 -0400
Subject: [PATCH 1059/1421] kbuild: clean Module.markers and modules.order for
 out-of-tree modules
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index eb38c839926..b309fca4b94 100644
--- a/Makefile
+++ b/Makefile
@@ -1421,7 +1421,9 @@ $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
 clean:	rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+                   $(KBUILD_EXTMOD)/Module.markers \
+                   $(KBUILD_EXTMOD)/modules.order
 clean: $(clean-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
-- 
GitLab


From c4d5ee67ce26503d7eaf2aca5bb13c58e89d1be8 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Fri, 24 Apr 2009 12:35:23 -0400
Subject: [PATCH 1060/1421] kbuild: "make prepare" should be "make
 modules_prepare"

Correct the Makefile help text to read "make modules_prepare".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index b309fca4b94..b18afad2e10 100644
--- a/Makefile
+++ b/Makefile
@@ -1293,7 +1293,7 @@ help:
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.ko     - Build module including final link'
-	@echo  '  prepare         - Set up for building external modules'
+	@echo  '  modules_prepare - Set up for building external modules'
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  kernelrelease	  - Output the release version string'
-- 
GitLab


From 2e6cb8b0dc602ba4aa23d1ec7e3524a7268f59d9 Mon Sep 17 00:00:00 2001
From: Matt Kraai <kraai@ftbfs.org>
Date: Tue, 21 Apr 2009 20:38:23 -0700
Subject: [PATCH 1061/1421] kbuild: remove a tag file before it is regenerated

If a tag file is not removed before it is regenerated, the newly
generated data is appended to the old, which preserves stale data and
makes the tag file grow over time.

Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/tags.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/tags.sh b/scripts/tags.sh
index 5bd8b1003d4..4a34ec591e8 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -164,10 +164,12 @@ case "$1" in
 		;;
 
 	"tags")
+		rm -f tags
 		xtags ctags
 		;;
 
 	"TAGS")
+		rm -f TAGS
 		xtags etags
 		;;
 esac
-- 
GitLab


From 64e3da109404eed27f825ee3eb1fe465ded47979 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 17 Apr 2009 18:28:55 -0700
Subject: [PATCH 1062/1421] docs: also clean index.html

Missed index.html in "make cleandocs", so add it.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Documentation/DocBook/Makefile | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 8918a32c6b3..b1eb661e630 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF     $@
 	$(call cmd,db2pdf)
 
 
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
 build_main_index = rm -rf $(main_idx) && \
 		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
 	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
 	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
 	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-	$(C-procfs-example)
+	$(C-procfs-example) $(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 
-- 
GitLab


From 99e3a1eb3c22bb671c6f3d22d8244bfc9fad8185 Mon Sep 17 00:00:00 2001
From: Cedric Hombourger <chombourger@gmail.com>
Date: Sat, 25 Apr 2009 09:38:21 +0200
Subject: [PATCH 1063/1421] kbuild: fix Module.markers permission error under
 cygwin

While building the kernel, we end-up calling modpost with -K and -M
options for the same file (Modules.markers).  This is resulting in
modpost's main function calling read_markers() and then write_markers() on
the same file.

We then have read_markers() mmap'ing the file, and writer_markers()
opening that same file for writing.

The issue is that read_markers() exits without munmap'ing the file and is
as a matter holding a reference on Modules.markers.  When write_markers()
is opening that very same file for writing, we still have a reference on
it and cygwin (Windows?) is then making fopen() fail with EPERM.

Calling release_file() before exiting read_markers() clears that reference
(and memory leak) and fopen() then succeeds.

Tested on both cygwin (1.3.22) and Linux.  Also ran modpost within
valgrind on Linux to make sure that the munmap'ed file was not accessed
after read_markers()

Signed-off-by: Cedric Hombourger <chombourger@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/mod/modpost.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8d46ea7d671..57d71a5f31b 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1990,6 +1990,7 @@ static void read_markers(const char *fname)
 		if (!mod->skip)
 			add_marker(mod, marker, fmt);
 	}
+	release_file(file, size);
 	return;
 fail:
 	fatal("parse error in markers list file\n");
-- 
GitLab


From a182ad3d0f858f50bb719a48bb35a013e12366c5 Mon Sep 17 00:00:00 2001
From: Nico Schottelius <nico-linux-20090330@schottelius.org>
Date: Sat, 25 Apr 2009 09:48:39 +0200
Subject: [PATCH 1064/1421] kbuild: fix scripts/setlocalversion with git

When using trees like wireless-testing, which have untagged tags,
scripts/setlocalversion does not display any git indication for
localversion.

This patch fixes it: If git is available, but no usable tag is found,
it uses -g${head}. It skips the detection of unanottated tags via
git name-rev.

Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/setlocalversion | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 47e75b69a2e..32c8554f394 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -10,13 +10,12 @@ cd "${1:-.}" || usage
 
 # Check for git and a git repo.
 if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
-	# Do we have an untagged version?
-	if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
-		if tag=`git describe 2>/dev/null`; then
-			echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
-		else
-			printf '%s%s' -g $head
-		fi
+	# Do we have an untagged tag?
+	if atag=`git describe 2>/dev/null`; then
+		echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+	# add -g${head}, if there is no usable tag
+	else
+		printf '%s%s' -g $head
 	fi
 
 	# Is this git on svn?
-- 
GitLab


From c993971f4a7dc7ae43963aecb958395353c109ae Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 26 Apr 2009 11:17:42 +0200
Subject: [PATCH 1065/1421] kbuild: fix comment in modpost.c

There is some confusion on naming of the head section.
Correct naming is .head.text.

Fix comment so we use correct naming.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/mod/modpost.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 57d71a5f31b..e5ae695458e 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -928,8 +928,7 @@ static int section_mismatch(const char *fromsec, const char *tosec)
  *           *probe_one, *_console, *_timer
  *
  * Pattern 3:
- *   Whitelist all refereces from .text.head to .init.data
- *   Whitelist all refereces from .text.head to .init.text
+ *   Whitelist all references from .head.text to any init section
  *
  * Pattern 4:
  *   Some symbols belong to init section but still it is ok to reference
-- 
GitLab


From b614a697dc17dff82f140d72d21a095f810fa7fb Mon Sep 17 00:00:00 2001
From: Anders Kaseorg <andersk@mit.edu>
Date: Thu, 23 Apr 2009 16:49:33 -0400
Subject: [PATCH 1066/1421] kbuild, modpost: Check the section flags, to catch
 missing "ax"/"aw"

When you put
  .section ".foo"
in an assembly file instead of
  .section "foo", "ax"
, one of the possible symptoms is that modpost will see an
ld-generated section name ".foo.1" in section_rel() or section_rela().
But this heuristic has two problems: it will miss a bad section that
has no relocations, and it will incorrectly flag many gcc-generated
sections as bad when compiling with -ffunction-sections
-fdata-sections.

On mips it fixes a lot of bogus warnings with gcc 4.4.0 lije this one:
WARNING: crypto/cryptd.o (.text.T.349): unexpected section name.

So instead of checking whether the section name matches a particular
pattern, we directly check for a missing SHF_ALLOC in the section
flags.

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/mod/modpost.c | 51 ++++++++++++++++---------------------------
 1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index e5ae695458e..936b6f8e46f 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -716,41 +716,27 @@ int match(const char *sym, const char * const pat[])
 
 /* sections that we do not want to do full section mismatch check on */
 static const char *section_white_list[] =
-	{ ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+	{ ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
 
 /*
- * Is this section one we do not want to check?
- * This is often debug sections.
- * If we are going to check this section then
- * test if section name ends with a dot and a number.
- * This is used to find sections where the linker have
- * appended a dot-number to make the name unique.
+ * This is used to find sections missing the SHF_ALLOC flag.
  * The cause of this is often a section specified in assembler
- * without "ax" / "aw" and the same section used in .c
- * code where gcc add these.
+ * without "ax" / "aw".
  */
-static int check_section(const char *modname, const char *sec)
-{
-	const char *e = sec + strlen(sec) - 1;
-	if (match(sec, section_white_list))
-		return 1;
-
-	if (*e && isdigit(*e)) {
-		/* consume all digits */
-		while (*e && e != sec && isdigit(*e))
-			e--;
-		if (*e == '.' && !strstr(sec, ".linkonce")) {
-			warn("%s (%s): unexpected section name.\n"
-			     "The (.[number]+) following section name are "
-			     "ld generated and not expected.\n"
-			     "Did you forget to use \"ax\"/\"aw\" "
-			     "in a .S file?\n"
-			     "Note that for example <linux/init.h> contains\n"
-			     "section definitions for use in .S files.\n\n",
-			     modname, sec);
-		}
+static void check_section(const char *modname, struct elf_info *elf,
+                          Elf_Shdr *sechdr)
+{
+	const char *sec = sech_name(elf, sechdr);
+
+	if (sechdr->sh_type == SHT_PROGBITS &&
+	    !(sechdr->sh_flags & SHF_ALLOC) &&
+	    !match(sec, section_white_list)) {
+		warn("%s (%s): unexpected non-allocatable section.\n"
+		     "Did you forget to use \"ax\"/\"aw\" in a .S file?\n"
+		     "Note that for example <linux/init.h> contains\n"
+		     "section definitions for use in .S files.\n\n",
+		     modname, sec);
 	}
-	return 0;
 }
 
 
@@ -1358,7 +1344,7 @@ static void section_rela(const char *modname, struct elf_info *elf,
 	fromsec = sech_name(elf, sechdr);
 	fromsec += strlen(".rela");
 	/* if from section (name) is know good then skip it */
-	if (check_section(modname, fromsec))
+	if (match(fromsec, section_white_list))
 		return;
 
 	for (rela = start; rela < stop; rela++) {
@@ -1402,7 +1388,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
 	fromsec = sech_name(elf, sechdr);
 	fromsec += strlen(".rel");
 	/* if from section (name) is know good then skip it */
-	if (check_section(modname, fromsec))
+	if (match(fromsec, section_white_list))
 		return;
 
 	for (rel = start; rel < stop; rel++) {
@@ -1465,6 +1451,7 @@ static void check_sec_ref(struct module *mod, const char *modname,
 
 	/* Walk through all sections */
 	for (i = 0; i < elf->hdr->e_shnum; i++) {
+		check_section(modname, elf, &elf->sechdrs[i]);
 		/* We want to process only relocation sections and not .init */
 		if (sechdrs[i].sh_type == SHT_RELA)
 			section_rela(modname, elf, &elf->sechdrs[i]);
-- 
GitLab


From 5ef316fbe7fd03802b8625833884587927161c14 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Tue, 3 Feb 2009 23:48:54 +0000
Subject: [PATCH 1067/1421] [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to
 <mach/map.h>

Add the physical address of the two I2S channel register blocks.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index baf1c0f1ea5..8199972ed5b 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -40,6 +40,8 @@
 
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
-- 
GitLab


From 090f848da000083bf6c1a052222396970e53b4d7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:21 +0000
Subject: [PATCH 1068/1421] [ARM] S3C: Add UDIVSLOT support for newer UARTS

Add support for the UDIVSLOT register on the newer UART blocks
which gives the capability of 1/16ths adjustment to the baud rate.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/serial/s3c6400.c |  1 +
 drivers/serial/samsung.c | 61 ++++++++++++++++++++++++++++++++++++++--
 drivers/serial/samsung.h |  4 +++
 3 files changed, 63 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 06936d13393..3e378523368 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = {
 	.name		= "Samsung S3C6400 UART",
 	.type		= PORT_S3C6400,
 	.fifosize	= 64,
+	.has_divslot	= 1,
 	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
 	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index e06686ae858..93b5d75db12 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
 struct baud_calc {
 	struct s3c24xx_uart_clksrc	*clksrc;
 	unsigned int			 calc;
+	unsigned int			 divslot;
 	unsigned int			 quot;
 	struct clk			*src;
 };
@@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
 				   struct s3c24xx_uart_clksrc *clksrc,
 				   unsigned int baud)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	unsigned long rate;
 
 	calc->src = clk_get(port->dev, clksrc->name);
@@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
 	rate /= clksrc->divisor;
 
 	calc->clksrc = clksrc;
-	calc->quot = (rate + (8 * baud)) / (16 * baud);
-	calc->calc = (rate / (calc->quot * 16));
+
+	if (ourport->info->has_divslot) {
+		unsigned long div = rate / baud;
+
+		/* The UDIVSLOT register on the newer UARTs allows us to
+		 * get a divisor adjustment of 1/16th on the baud clock.
+		 *
+		 * We don't keep the UDIVSLOT value (the 16ths we calculated
+		 * by not multiplying the baud by 16) as it is easy enough
+		 * to recalculate.
+		 */
+
+		calc->quot = div / 16;
+		calc->calc = rate / div;
+	} else {
+		calc->quot = (rate + (8 * baud)) / (16 * baud);
+		calc->calc = (rate / (calc->quot * 16));
+	}
 
 	calc->quot--;
 	return 1;
@@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
 	return best->quot;
 }
 
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+	[0] = 0x0000,
+	[1] = 0x0080,
+	[2] = 0x0808,
+	[3] = 0x0888,
+	[4] = 0x2222,
+	[5] = 0x4924,
+	[6] = 0x4A52,
+	[7] = 0x54AA,
+	[8] = 0x5555,
+	[9] = 0xD555,
+	[10] = 0xD5D5,
+	[11] = 0xDDD5,
+	[12] = 0xDDDD,
+	[13] = 0xDFDD,
+	[14] = 0xDFDF,
+	[15] = 0xFFDF,
+};
+
 static void s3c24xx_serial_set_termios(struct uart_port *port,
 				       struct ktermios *termios,
 				       struct ktermios *old)
@@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	unsigned int baud, quot;
 	unsigned int ulcon;
 	unsigned int umcon;
+	unsigned int udivslot = 0;
 
 	/*
 	 * We don't support modem control lines.
@@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	/* check to see if we need  to change clock source */
 
 	if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+		dbg("selecting clock %p\n", clk);
 		s3c24xx_serial_setsource(port, clksrc);
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
@@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
 
+	if (ourport->info->has_divslot) {
+		unsigned int div = ourport->baudclk_rate / baud;
+
+		udivslot = udivslot_table[div & 15];
+		dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+	}
+
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
 		dbg("config: 5bits/char\n");
@@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+	dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+	    ulcon, quot, udivslot);
 
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
 	wr_regl(port, S3C2410_UMCON, umcon);
 
+	if (ourport->info->has_divslot)
+		wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
 	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
 	    rd_regl(port, S3C2410_ULCON),
 	    rd_regl(port, S3C2410_UCON),
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 571d6b90d20..7afb94843a0 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -21,6 +21,10 @@ struct s3c24xx_uart_info {
 	unsigned long		tx_fifoshift;
 	unsigned long		tx_fifofull;
 
+	/* uart port features */
+
+	unsigned int		has_divslot:1;
+
 	/* clock source control */
 
 	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-- 
GitLab


From dc8fc7edef5fe799a1c38c916d2c64b1d0fcf81a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 28 Apr 2009 10:06:00 +0100
Subject: [PATCH 1069/1421] [ARM] S3C2412: Add missing cache flush in suspend
 code

The alterations to the suspend code missed adding a
call to the cache flushing routines during the suspend
path of the S3C2412.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/pm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index c9cfe40e21f..a7417c479ff 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/cacheflush.h>
 #include <asm/irq.h>
 
 #include <mach/regs-power.h>
@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
 {
 	unsigned long tmp;
 
+	flush_cache_all();
+
 	/* set our standby method to sleep */
 
 	tmp = __raw_readl(S3C2412_PWRCFG);
-- 
GitLab


From d7226fb6ec5d4f325e4e7fd905894e2ea3eb3ae0 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 1 May 2009 15:16:04 +0200
Subject: [PATCH 1070/1421] Revert "genirq: assert that irq handlers are indeed
 running in hardirq context"

This reverts commit 044d408409cc4e1bc75c886e27ca85c270db104c.

The commit added a warning when handle_IRQ_event() is called outside
of hard interrupt context. This breaks the generic tasklet based
interrupt resend mechanism which is used when the hardware has no way
to retrigger the interrupt. So we get a warning for a use case which
is correct and worked for years. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/irq/handle.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index d82142be8dd..26e08754744 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -363,8 +363,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action)
 	irqreturn_t ret, retval = IRQ_NONE;
 	unsigned int status = 0;
 
-	WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!");
-
 	if (!(action->flags & IRQF_DISABLED))
 		local_irq_enable_in_hardirq();
 
-- 
GitLab


From 595e8fabea22c96f674102f33b4a759f4512dd9c Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Sun, 26 Apr 2009 14:18:25 +0200
Subject: [PATCH 1071/1421] microblaze: Storage class should be before const
 qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo-static.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index cfe44effdb7..450ca6bb828 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -14,8 +14,8 @@
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
 	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
-- 
GitLab


From c71a7a3875b40d18a08c09f6c757bd7a9b6ce894 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 30 Apr 2009 09:35:53 +0200
Subject: [PATCH 1072/1421] microblaze: Fix return value for sys_ipc

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/sys_microblaze.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index ba0568c2cc1..31905ff590b 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
 		break;
 	}
-	return -EINVAL;
+	return ret;
 }
 
 asmlinkage int sys_vfork(struct pt_regs *regs)
-- 
GitLab


From e836f015b5c07da2f95a441274ef0a788ce17f80 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 16:20:35 +0000
Subject: [PATCH 1073/1421] [CIFS] Remove trailing whitespace

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES   | 4 +++-
 fs/cifs/readdir.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1b0643c2eac..43f2e0d061f 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -6,7 +6,9 @@ characters. Add support for mounting root of a share which redirects immediately
 to DFS target. Convert string conversion functions from Unicode to more
 accurately mark string length before allocating memory (which may help the
 rare cases where a UTF-8 string is much larger than the UCS2 string that
-we converted from).
+we converted from).  Fix endianness of the vcnum field used during
+session setup to distinguish multiple mounts to same server from different
+userids.
  
 Version 1.57
 ------------
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index df003fe3710..964e097c820 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -532,7 +532,7 @@ ffirst_retry:
 			CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
 	if (rc == 0)
 		cifsFile->invalidHandle = false;
-	/* BB add following call to handle readdir on new NTFS symlink errors 
+	/* BB add following call to handle readdir on new NTFS symlink errors
 	else if STATUS_STOPPED_ON_SYMLINK
 		call get_symlink_reparse_path and retry with new path */
 	else if ((rc == -EOPNOTSUPP) &&
-- 
GitLab


From 051a2a0d3242b448281376bb63cfa9385e0b6c68 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 16:21:04 +0000
Subject: [PATCH 1074/1421] [CIFS] Fix endian conversion of vcnum field

When multiply mounting from the same client to the same server, with
different userids, we create a vcnum which should be unique if
possible (this is not the same as the smb uid, which is the handle
to the security context).  We were not endian converting additional
(beyond the first which is zero) vcnum properly.

CC: Stable <stable@kernel.org>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 2bcff17047a..b2bdc2a3383 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -111,7 +111,7 @@ static __le16 get_next_vcnum(struct cifsSesInfo *ses)
 get_vc_num_exit:
 	write_unlock(&cifs_tcp_ses_lock);
 
-	return le16_to_cpu(vcnum);
+	return cpu_to_le16(vcnum);
 }
 
 static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
-- 
GitLab


From f9a196b8dceba3c1e5fe885b81e45043ad7c60fc Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 1 May 2009 20:59:25 +0200
Subject: [PATCH 1075/1421] x86: initialize io_bitmap_base on 32bit

commit db949bba3c7cf2e664ac12e237c6d4c914f0c69d (x86-32: use non-lazy
io bitmap context switching) broke ioperm for 32bit because it removed
the lazy initialization of io_bitmap_base and did not set it to the
real bitmap offset.

[ Impact: fix non-working sys_ioperm() on 32-bit kernels ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/cpu/common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c4f667896c2..c1caefc82e6 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void)
 	load_TR_desc();
 	load_LDT(&init_mm.context);
 
+	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+
 #ifdef CONFIG_DOUBLEFAULT
 	/* Set up doublefault TSS pointer in the GDT */
 	__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
-- 
GitLab


From e5288eb5ea89bd82d897cb687348bc608278f920 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Sat, 2 May 2009 00:02:57 +0200
Subject: [PATCH 1076/1421] HID: fix oops in hid_check_keys_pressed()

If the device is not claimed by hid-input (i.e devices driver by userspace
hiddev/hidraw-based drivers, or completely detached from HID
and driver by libusb), we must not check the hid->inptus, as it
is not guaranteed to be initialized, as this is performed only for devices
handled by hid-input.

Reported-by: Guillaume Chazarain <guichaz@gmail.com>
Tested-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index c7075d2b078..8551693d645 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1825,6 +1825,9 @@ int hid_check_keys_pressed(struct hid_device *hid)
 	struct hid_input *hidinput;
 	int i;
 
+	if (!(hid->claimed & HID_CLAIMED_INPUT))
+		return 0;
+
 	list_for_each_entry(hidinput, &hid->inputs, list) {
 		for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++)
 			if (hidinput->input->key[i])
-- 
GitLab


From 2edd6c5b0517b9131ede9e74cb121898ccd73042 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 04:55:39 +0000
Subject: [PATCH 1077/1421] [CIFS] NTLMSSP support moving into new file, old
 dead code removed

Remove dead NTLMSSP support from connect.c prior to addition of
the new code to replace it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 730 ----------------------------------------------
 1 file changed, 730 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 9dcdb0c707e..3a934dd8422 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2605,736 +2605,6 @@ out:
 	return rc;
 }
 
-static int
-CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
-			      struct cifsSesInfo *ses, bool *pNTLMv2_flag,
-			      const struct nls_table *nls_codepage)
-{
-	struct smb_hdr *smb_buffer;
-	struct smb_hdr *smb_buffer_response;
-	SESSION_SETUP_ANDX *pSMB;
-	SESSION_SETUP_ANDX *pSMBr;
-	char *bcc_ptr;
-	char *domain;
-	int rc = 0;
-	int remaining_words = 0;
-	int bytes_returned = 0;
-	int len;
-	int SecurityBlobLength = sizeof(NEGOTIATE_MESSAGE);
-	PNEGOTIATE_MESSAGE SecurityBlob;
-	PCHALLENGE_MESSAGE SecurityBlob2;
-	__u32 negotiate_flags, capabilities;
-	__u16 count;
-
-	cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
-	if (ses == NULL)
-		return -EINVAL;
-	domain = ses->domainName;
-	*pNTLMv2_flag = false;
-	smb_buffer = cifs_buf_get();
-	if (smb_buffer == NULL) {
-		return -ENOMEM;
-	}
-	smb_buffer_response = smb_buffer;
-	pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-	pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-
-	/* send SMBsessionSetup here */
-	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-			NULL /* no tCon exists yet */ , 12 /* wct */ );
-
-	smb_buffer->Mid = GetNextMid(ses->server);
-	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-	pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-
-	pSMB->req.AndXCommand = 0xFF;
-	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
-	if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
-	capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-	    CAP_EXTENDED_SECURITY;
-	if (ses->capabilities & CAP_UNICODE) {
-		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-		capabilities |= CAP_UNICODE;
-	}
-	if (ses->capabilities & CAP_STATUS32) {
-		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-		capabilities |= CAP_STATUS32;
-	}
-	if (ses->capabilities & CAP_DFS) {
-		smb_buffer->Flags2 |= SMBFLG2_DFS;
-		capabilities |= CAP_DFS;
-	}
-	pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
-	bcc_ptr = (char *) &pSMB->req.SecurityBlob;
-	SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
-	strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
-	SecurityBlob->MessageType = NtLmNegotiate;
-	negotiate_flags =
-	    NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
-	    NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
-	    NTLMSSP_NEGOTIATE_56 |
-	    /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
-	if (sign_CIFS_PDUs)
-		negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-	/* setup pointers to domain name and workstation name */
-	bcc_ptr += SecurityBlobLength;
-
-	SecurityBlob->WorkstationName.BufferOffset = 0;
-	SecurityBlob->WorkstationName.Length = 0;
-	SecurityBlob->WorkstationName.MaximumLength = 0;
-
-	/* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
-	along with username on auth request (ie the response to challenge) */
-	SecurityBlob->DomainName.BufferOffset = 0;
-	SecurityBlob->DomainName.Length = 0;
-	SecurityBlob->DomainName.MaximumLength = 0;
-	if (ses->capabilities & CAP_UNICODE) {
-		if ((long) bcc_ptr % 2) {
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
-				  nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;	/* null terminate Linux version */
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
-				  64, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null terminate network opsys string */
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null domain */
-	} else {		/* ASCII */
-		strcpy(bcc_ptr, "Linux version ");
-		bcc_ptr += strlen("Linux version ");
-		strcpy(bcc_ptr, utsname()->release);
-		bcc_ptr += strlen(utsname()->release) + 1;
-		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-		bcc_ptr++;	/* empty domain field */
-		*bcc_ptr = 0;
-	}
-	SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
-	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-	count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-	smb_buffer->smb_buf_length += count;
-	pSMB->req.ByteCount = cpu_to_le16(count);
-
-	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-			 &bytes_returned, CIFS_LONG_OP);
-
-	if (smb_buffer_response->Status.CifsError ==
-	    cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
-		rc = 0;
-
-	if (rc) {
-/*    rc = map_smb_to_linux_error(smb_buffer_response);  *//* done in SendReceive now */
-	} else if ((smb_buffer_response->WordCount == 3)
-		   || (smb_buffer_response->WordCount == 4)) {
-		__u16 action = le16_to_cpu(pSMBr->resp.Action);
-		__u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-
-		if (action & GUEST_LOGIN)
-			cFYI(1, ("Guest login"));
-	/* Do we want to set anything in SesInfo struct when guest login? */
-
-		bcc_ptr = pByteArea(smb_buffer_response);
-	/* response can have either 3 or 4 word count - Samba sends 3 */
-
-		SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
-		if (SecurityBlob2->MessageType != NtLmChallenge) {
-			cFYI(1, ("Unexpected NTLMSSP message type received %d",
-			      SecurityBlob2->MessageType));
-		} else if (ses) {
-			ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
-			cFYI(1, ("UID = %d", ses->Suid));
-			if ((pSMBr->resp.hdr.WordCount == 3)
-			    || ((pSMBr->resp.hdr.WordCount == 4)
-				&& (blob_len <
-				    pSMBr->resp.ByteCount))) {
-
-				if (pSMBr->resp.hdr.WordCount == 4) {
-					bcc_ptr += blob_len;
-					cFYI(1, ("Security Blob Length %d",
-					      blob_len));
-				}
-
-				cFYI(1, ("NTLMSSP Challenge rcvd"));
-
-				memcpy(ses->server->cryptKey,
-				       SecurityBlob2->Challenge,
-				       CIFS_CRYPTO_KEY_SIZE);
-/* NTLMV2 flag is not for NTLMv2 password hash */
-/*				if (SecurityBlob2->NegotiateFlags &
-					cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
-					*pNTLMv2_flag = true; */ /* BB wrong */
-
-				if ((SecurityBlob2->NegotiateFlags &
-					cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
-					|| (sign_CIFS_PDUs > 1))
-						ses->server->secMode |=
-							SECMODE_SIGN_REQUIRED;
-				if ((SecurityBlob2->NegotiateFlags &
-					cpu_to_le32(NTLMSSP_NEGOTIATE_SIGN)) && (sign_CIFS_PDUs))
-						ses->server->secMode |=
-							SECMODE_SIGN_ENABLED;
-
-				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-					if ((long) (bcc_ptr) % 2) {
-						remaining_words =
-						    (BCC(smb_buffer_response)
-						     - 1) / 2;
-					 /* Must word align unicode strings */
-						bcc_ptr++;
-					} else {
-						remaining_words =
-						    BCC
-						    (smb_buffer_response) / 2;
-					}
-					len =
-					    UniStrnlen((wchar_t *) bcc_ptr,
-						       remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
-   the end since (at least) WIN2K and Windows XP have a major bug in not null
-   terminating last Unicode string in response  */
-					kfree(ses->serverOS);
-					ses->serverOS =
-					    kzalloc(2 * (len + 1), GFP_KERNEL);
-					cifs_strfromUCS_le(ses->serverOS,
-							   (__le16 *)
-							   bcc_ptr, len,
-							   nls_codepage);
-					bcc_ptr += 2 * (len + 1);
-					remaining_words -= len + 1;
-					ses->serverOS[2 * len] = 0;
-					ses->serverOS[1 + (2 * len)] = 0;
-					if (remaining_words > 0) {
-						len = UniStrnlen((wchar_t *)
-								 bcc_ptr,
-								 remaining_words
-								 - 1);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(2 * (len + 1),
-							    GFP_KERNEL);
-						cifs_strfromUCS_le(ses->
-								   serverNOS,
-								   (__le16 *)
-								   bcc_ptr,
-								   len,
-								   nls_codepage);
-						bcc_ptr += 2 * (len + 1);
-						ses->serverNOS[2 * len] = 0;
-						ses->serverNOS[1 +
-							       (2 * len)] = 0;
-						remaining_words -= len + 1;
-						if (remaining_words > 0) {
-							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
-				/* last string not always null terminated
-				   (for e.g. for Windows XP & 2000) */
-							kfree(ses->serverDomain);
-							ses->serverDomain =
-							    kzalloc(2 *
-								    (len +
-								     1),
-								    GFP_KERNEL);
-							cifs_strfromUCS_le
-							    (ses->serverDomain,
-							     (__le16 *)bcc_ptr,
-							     len, nls_codepage);
-							bcc_ptr +=
-							    2 * (len + 1);
-							ses->serverDomain[2*len]
-							    = 0;
-							ses->serverDomain
-								[1 + (2 * len)]
-							    = 0;
-						} /* else no more room so create dummy domain string */
-						else {
-							kfree(ses->serverDomain);
-							ses->serverDomain =
-							    kzalloc(2,
-								    GFP_KERNEL);
-						}
-					} else {	/* no room so create dummy domain and NOS string */
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-						    kzalloc(2, GFP_KERNEL);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(2, GFP_KERNEL);
-					}
-				} else {	/* ASCII */
-					len = strnlen(bcc_ptr, 1024);
-					if (((long) bcc_ptr + len) - (long)
-					    pByteArea(smb_buffer_response)
-					    <= BCC(smb_buffer_response)) {
-						kfree(ses->serverOS);
-						ses->serverOS =
-						    kzalloc(len + 1,
-							    GFP_KERNEL);
-						strncpy(ses->serverOS,
-							bcc_ptr, len);
-
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;	/* null terminate string */
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(len + 1,
-							    GFP_KERNEL);
-						strncpy(ses->serverNOS, bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-						    kzalloc(len + 1,
-							    GFP_KERNEL);
-						strncpy(ses->serverDomain,
-							bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-					} else
-						cFYI(1,
-						     ("field of length %d "
-						    "extends beyond end of smb",
-						      len));
-				}
-			} else {
-				cERROR(1, ("Security Blob Length extends beyond"
-					   " end of SMB"));
-			}
-		} else {
-			cERROR(1, ("No session structure passed in."));
-		}
-	} else {
-		cERROR(1, ("Invalid Word count %d:",
-			smb_buffer_response->WordCount));
-		rc = -EIO;
-	}
-
-	cifs_buf_release(smb_buffer);
-
-	return rc;
-}
-
-static int
-CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-			char *ntlm_session_key, bool ntlmv2_flag,
-			const struct nls_table *nls_codepage)
-{
-	struct smb_hdr *smb_buffer;
-	struct smb_hdr *smb_buffer_response;
-	SESSION_SETUP_ANDX *pSMB;
-	SESSION_SETUP_ANDX *pSMBr;
-	char *bcc_ptr;
-	char *user;
-	char *domain;
-	int rc = 0;
-	int remaining_words = 0;
-	int bytes_returned = 0;
-	int len;
-	int SecurityBlobLength = sizeof(AUTHENTICATE_MESSAGE);
-	PAUTHENTICATE_MESSAGE SecurityBlob;
-	__u32 negotiate_flags, capabilities;
-	__u16 count;
-
-	cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
-	if (ses == NULL)
-		return -EINVAL;
-	user = ses->userName;
-	domain = ses->domainName;
-	smb_buffer = cifs_buf_get();
-	if (smb_buffer == NULL) {
-		return -ENOMEM;
-	}
-	smb_buffer_response = smb_buffer;
-	pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
-	pSMBr = (SESSION_SETUP_ANDX *)smb_buffer_response;
-
-	/* send SMBsessionSetup here */
-	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-			NULL /* no tCon exists yet */ , 12 /* wct */ );
-
-	smb_buffer->Mid = GetNextMid(ses->server);
-	pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-	pSMB->req.AndXCommand = 0xFF;
-	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
-	pSMB->req.hdr.Uid = ses->Suid;
-
-	if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
-	capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-			CAP_EXTENDED_SECURITY;
-	if (ses->capabilities & CAP_UNICODE) {
-		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-		capabilities |= CAP_UNICODE;
-	}
-	if (ses->capabilities & CAP_STATUS32) {
-		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-		capabilities |= CAP_STATUS32;
-	}
-	if (ses->capabilities & CAP_DFS) {
-		smb_buffer->Flags2 |= SMBFLG2_DFS;
-		capabilities |= CAP_DFS;
-	}
-	pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
-	bcc_ptr = (char *)&pSMB->req.SecurityBlob;
-	SecurityBlob = (PAUTHENTICATE_MESSAGE)bcc_ptr;
-	strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
-	SecurityBlob->MessageType = NtLmAuthenticate;
-	bcc_ptr += SecurityBlobLength;
-	negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
-			NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
-			NTLMSSP_NEGOTIATE_56 | NTLMSSP_NEGOTIATE_128 |
-			NTLMSSP_NEGOTIATE_EXTENDED_SEC;
-	if (sign_CIFS_PDUs)
-		negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
-
-/* setup pointers to domain name and workstation name */
-
-	SecurityBlob->WorkstationName.BufferOffset = 0;
-	SecurityBlob->WorkstationName.Length = 0;
-	SecurityBlob->WorkstationName.MaximumLength = 0;
-	SecurityBlob->SessionKey.Length = 0;
-	SecurityBlob->SessionKey.MaximumLength = 0;
-	SecurityBlob->SessionKey.BufferOffset = 0;
-
-	SecurityBlob->LmChallengeResponse.Length = 0;
-	SecurityBlob->LmChallengeResponse.MaximumLength = 0;
-	SecurityBlob->LmChallengeResponse.BufferOffset = 0;
-
-	SecurityBlob->NtChallengeResponse.Length =
-	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
-	SecurityBlob->NtChallengeResponse.MaximumLength =
-	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
-	memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
-	SecurityBlob->NtChallengeResponse.BufferOffset =
-	    cpu_to_le32(SecurityBlobLength);
-	SecurityBlobLength += CIFS_SESS_KEY_SIZE;
-	bcc_ptr += CIFS_SESS_KEY_SIZE;
-
-	if (ses->capabilities & CAP_UNICODE) {
-		if (domain == NULL) {
-			SecurityBlob->DomainName.BufferOffset = 0;
-			SecurityBlob->DomainName.Length = 0;
-			SecurityBlob->DomainName.MaximumLength = 0;
-		} else {
-			__u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
-					  nls_codepage);
-			ln *= 2;
-			SecurityBlob->DomainName.MaximumLength =
-			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.BufferOffset =
-			    cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
-		}
-		if (user == NULL) {
-			SecurityBlob->UserName.BufferOffset = 0;
-			SecurityBlob->UserName.Length = 0;
-			SecurityBlob->UserName.MaximumLength = 0;
-		} else {
-			__u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, user, 64,
-					  nls_codepage);
-			ln *= 2;
-			SecurityBlob->UserName.MaximumLength =
-			    cpu_to_le16(ln);
-			SecurityBlob->UserName.BufferOffset =
-			    cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->UserName.Length = cpu_to_le16(ln);
-		}
-
-		/* SecurityBlob->WorkstationName.Length =
-		 cifs_strtoUCS((__le16 *) bcc_ptr, "AMACHINE",64, nls_codepage);
-		   SecurityBlob->WorkstationName.Length *= 2;
-		   SecurityBlob->WorkstationName.MaximumLength =
-			cpu_to_le16(SecurityBlob->WorkstationName.Length);
-		   SecurityBlob->WorkstationName.BufferOffset =
-				 cpu_to_le32(SecurityBlobLength);
-		   bcc_ptr += SecurityBlob->WorkstationName.Length;
-		   SecurityBlobLength += SecurityBlob->WorkstationName.Length;
-		   SecurityBlob->WorkstationName.Length =
-			cpu_to_le16(SecurityBlob->WorkstationName.Length);  */
-
-		if ((long) bcc_ptr % 2) {
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
-				  nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;	/* null term version string */
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
-				  64, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null terminate network opsys string */
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null domain */
-	} else {		/* ASCII */
-		if (domain == NULL) {
-			SecurityBlob->DomainName.BufferOffset = 0;
-			SecurityBlob->DomainName.Length = 0;
-			SecurityBlob->DomainName.MaximumLength = 0;
-		} else {
-			__u16 ln;
-			negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
-			strncpy(bcc_ptr, domain, 63);
-			ln = strnlen(domain, 64);
-			SecurityBlob->DomainName.MaximumLength =
-			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.BufferOffset =
-			    cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
-		}
-		if (user == NULL) {
-			SecurityBlob->UserName.BufferOffset = 0;
-			SecurityBlob->UserName.Length = 0;
-			SecurityBlob->UserName.MaximumLength = 0;
-		} else {
-			__u16 ln;
-			strncpy(bcc_ptr, user, 63);
-			ln = strnlen(user, 64);
-			SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
-			SecurityBlob->UserName.BufferOffset =
-						cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->UserName.Length = cpu_to_le16(ln);
-		}
-		/* BB fill in our workstation name if known BB */
-
-		strcpy(bcc_ptr, "Linux version ");
-		bcc_ptr += strlen("Linux version ");
-		strcpy(bcc_ptr, utsname()->release);
-		bcc_ptr += strlen(utsname()->release) + 1;
-		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-		bcc_ptr++;	/* null domain */
-		*bcc_ptr = 0;
-	}
-	SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
-	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-	count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-	smb_buffer->smb_buf_length += count;
-	pSMB->req.ByteCount = cpu_to_le16(count);
-
-	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-			 &bytes_returned, CIFS_LONG_OP);
-	if (rc) {
-/*   rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
-	} else if ((smb_buffer_response->WordCount == 3) ||
-		   (smb_buffer_response->WordCount == 4)) {
-		__u16 action = le16_to_cpu(pSMBr->resp.Action);
-		__u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-		if (action & GUEST_LOGIN)
-			cFYI(1, ("Guest login")); /* BB Should we set anything
-							 in SesInfo struct ? */
-/*		if (SecurityBlob2->MessageType != NtLm??) {
-			cFYI("Unexpected message type on auth response is %d"));
-		} */
-
-		if (ses) {
-			cFYI(1,
-			     ("Check challenge UID %d vs auth response UID %d",
-			      ses->Suid, smb_buffer_response->Uid));
-			/* UID left in wire format */
-			ses->Suid = smb_buffer_response->Uid;
-			bcc_ptr = pByteArea(smb_buffer_response);
-		/* response can have either 3 or 4 word count - Samba sends 3 */
-			if ((pSMBr->resp.hdr.WordCount == 3)
-			    || ((pSMBr->resp.hdr.WordCount == 4)
-				&& (blob_len <
-				    pSMBr->resp.ByteCount))) {
-				if (pSMBr->resp.hdr.WordCount == 4) {
-					bcc_ptr +=
-					    blob_len;
-					cFYI(1,
-					     ("Security Blob Length %d ",
-					      blob_len));
-				}
-
-				cFYI(1,
-				     ("NTLMSSP response to Authenticate "));
-
-				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-					if ((long) (bcc_ptr) % 2) {
-						remaining_words =
-						    (BCC(smb_buffer_response)
-						     - 1) / 2;
-						bcc_ptr++;	/* Unicode strings must be word aligned */
-					} else {
-						remaining_words = BCC(smb_buffer_response) / 2;
-					}
-					len = UniStrnlen((wchar_t *) bcc_ptr,
-							remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
-  the end since (at least) WIN2K and Windows XP have a major bug in not null
-  terminating last Unicode string in response  */
-					kfree(ses->serverOS);
-					ses->serverOS =
-					    kzalloc(2 * (len + 1), GFP_KERNEL);
-					cifs_strfromUCS_le(ses->serverOS,
-							   (__le16 *)
-							   bcc_ptr, len,
-							   nls_codepage);
-					bcc_ptr += 2 * (len + 1);
-					remaining_words -= len + 1;
-					ses->serverOS[2 * len] = 0;
-					ses->serverOS[1 + (2 * len)] = 0;
-					if (remaining_words > 0) {
-						len = UniStrnlen((wchar_t *)
-								 bcc_ptr,
-								 remaining_words
-								 - 1);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(2 * (len + 1),
-							    GFP_KERNEL);
-						cifs_strfromUCS_le(ses->
-								   serverNOS,
-								   (__le16 *)
-								   bcc_ptr,
-								   len,
-								   nls_codepage);
-						bcc_ptr += 2 * (len + 1);
-						ses->serverNOS[2 * len] = 0;
-						ses->serverNOS[1+(2*len)] = 0;
-						remaining_words -= len + 1;
-						if (remaining_words > 0) {
-							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
-     /* last string not always null terminated (e.g. for Windows XP & 2000) */
-							kfree(ses->serverDomain);
-							ses->serverDomain =
-							    kzalloc(2 *
-								    (len +
-								     1),
-								    GFP_KERNEL);
-							cifs_strfromUCS_le
-							    (ses->
-							     serverDomain,
-							     (__le16 *)
-							     bcc_ptr, len,
-							     nls_codepage);
-							bcc_ptr +=
-							    2 * (len + 1);
-							ses->
-							    serverDomain[2
-									 * len]
-							    = 0;
-							ses->
-							    serverDomain[1
-									 +
-									 (2
-									  *
-									  len)]
-							    = 0;
-						} /* else no more room so create dummy domain string */
-						else {
-							kfree(ses->serverDomain);
-							ses->serverDomain = kzalloc(2,GFP_KERNEL);
-						}
-					} else {  /* no room so create dummy domain and NOS string */
-						kfree(ses->serverDomain);
-						ses->serverDomain = kzalloc(2, GFP_KERNEL);
-						kfree(ses->serverNOS);
-						ses->serverNOS = kzalloc(2, GFP_KERNEL);
-					}
-				} else {	/* ASCII */
-					len = strnlen(bcc_ptr, 1024);
-					if (((long) bcc_ptr + len) -
-					   (long) pByteArea(smb_buffer_response)
-						<= BCC(smb_buffer_response)) {
-						kfree(ses->serverOS);
-						ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
-						strncpy(ses->serverOS,bcc_ptr, len);
-
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;	/* null terminate the string */
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverNOS);
-						ses->serverNOS = kzalloc(len+1,
-								    GFP_KERNEL);
-						strncpy(ses->serverNOS,
-							bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-								kzalloc(len+1,
-								    GFP_KERNEL);
-						strncpy(ses->serverDomain,
-							bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-					} else
-						cFYI(1, ("field of length %d "
-						   "extends beyond end of smb ",
-						      len));
-				}
-			} else {
-				cERROR(1, ("Security Blob extends beyond end "
-					"of SMB"));
-			}
-		} else {
-			cERROR(1, ("No session structure passed in."));
-		}
-	} else {
-		cERROR(1, ("Invalid Word count %d: ",
-			smb_buffer_response->WordCount));
-		rc = -EIO;
-	}
-
-	cifs_buf_release(smb_buffer);
-
-	return rc;
-}
-
 int
 CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	 const char *tree, struct cifsTconInfo *tcon,
-- 
GitLab


From 341060273232a2df0d1a7fa53abc661fcf22747c Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Sat, 2 May 2009 04:59:34 +0000
Subject: [PATCH 1078/1421] [CIFS] remove cifs_strfromUCS_le

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 29 -----------------------------
 fs/cifs/cifs_unicode.h |  1 -
 2 files changed, 30 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 6382720acf7..60e3c4253de 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -180,35 +180,6 @@ cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
 	return outlen;
 }
 
-/*
- * NAME:	cifs_strfromUCS()
- *
- * FUNCTION:	Convert little-endian unicode string to character string
- *
- */
-int
-cifs_strfromUCS_le(char *to, const __le16 *from,
-		   int len, const struct nls_table *codepage)
-{
-	int i;
-	int outlen = 0;
-
-	for (i = 0; (i < len) && from[i]; i++) {
-		int charlen;
-		/* 2.4.0 kernel or greater */
-		charlen =
-		    codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
-				       NLS_MAX_CHARSET_SIZE);
-		if (charlen > 0) {
-			outlen += charlen;
-		} else {
-			to[outlen++] = '?';
-		}
-	}
-	to[outlen] = 0;
-	return outlen;
-}
-
 /*
  * NAME:	cifs_strtoUCS()
  *
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 1570a701bf3..650638275a6 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -76,7 +76,6 @@ int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
 		   const struct nls_table *codepage, bool mapchar);
 int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 		    const struct nls_table *codepage);
-int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 char *cifs_strndup_from_ucs(const char *src, const int maxlen,
 			    const bool is_unicode,
-- 
GitLab


From afe48c31ea5c74eaac58621ce1c85ae8187c4383 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 05:25:46 +0000
Subject: [PATCH 1079/1421] [CIFS] Fix final user of old string conversion code

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 80 ++++++++++++++++++++++-------------------------
 1 file changed, 38 insertions(+), 42 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b968e5bd7df..0ac32bd336d 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2564,7 +2564,6 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata,
 	*pparmlen = parm_count;
 	return 0;
 }
-#endif /* CIFS_EXPERIMENTAL */
 
 int
 CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
@@ -2611,59 +2610,55 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 	} else {		/* decode response */
 		__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
 		__u32 data_count = le32_to_cpu(pSMBr->DataCount);
-		if ((pSMBr->ByteCount < 2) || (data_offset > 512))
+		if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
 		/* BB also check enough total bytes returned */
 			rc = -EIO;	/* bad smb */
-		else {
-			if (data_count && (data_count < 2048)) {
-				char *end_of_smb = 2 /* sizeof byte count */ +
-						pSMBr->ByteCount +
-						(char *)&pSMBr->ByteCount;
+			goto qreparse_out;
+		}
+		if (data_count && (data_count < 2048)) {
+			char *end_of_smb = 2 /* sizeof byte count */ +
+				pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
 
-				struct reparse_data *reparse_buf =
+			struct reparse_data *reparse_buf =
 						(struct reparse_data *)
 						((char *)&pSMBr->hdr.Protocol
 								 + data_offset);
-				if ((char *)reparse_buf >= end_of_smb) {
-					rc = -EIO;
-					goto qreparse_out;
-				}
-				if ((reparse_buf->LinkNamesBuf +
-					reparse_buf->TargetNameOffset +
-					reparse_buf->TargetNameLen) >
-						end_of_smb) {
-					cFYI(1, ("reparse buf beyond SMB"));
-					rc = -EIO;
-					goto qreparse_out;
-				}
+			if ((char *)reparse_buf >= end_of_smb) {
+				rc = -EIO;
+				goto qreparse_out;
+			}
+			if ((reparse_buf->LinkNamesBuf +
+				reparse_buf->TargetNameOffset +
+				reparse_buf->TargetNameLen) > end_of_smb) {
+				cFYI(1, ("reparse buf beyond SMB"));
+				rc = -EIO;
+				goto qreparse_out;
+			}
 
-				if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-					name_len = UniStrnlen((wchar_t *)
+			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
+				cifs_from_ucs2(symlinkinfo, (__le16 *)
 						(reparse_buf->LinkNamesBuf +
 						reparse_buf->TargetNameOffset),
-						min(buflen/2,
-						reparse_buf->TargetNameLen / 2));
-					cifs_strfromUCS_le(symlinkinfo,
-						(__le16 *) (reparse_buf->LinkNamesBuf +
-						reparse_buf->TargetNameOffset),
-						name_len, nls_codepage);
-				} else { /* ASCII names */
-					strncpy(symlinkinfo,
-						reparse_buf->LinkNamesBuf +
-						reparse_buf->TargetNameOffset,
-						min_t(const int, buflen,
-						   reparse_buf->TargetNameLen));
-				}
-			} else {
-				rc = -EIO;
-				cFYI(1, ("Invalid return data count on "
-					 "get reparse info ioctl"));
+						buflen,
+						reparse_buf->TargetNameLen,
+						nls_codepage, 0);
+			} else { /* ASCII names */
+				strncpy(symlinkinfo,
+					reparse_buf->LinkNamesBuf +
+					reparse_buf->TargetNameOffset,
+					min_t(const int, buflen,
+					   reparse_buf->TargetNameLen));
 			}
-			symlinkinfo[buflen] = 0; /* just in case so the caller
-					does not go off the end of the buffer */
-			cFYI(1, ("readlink result - %s", symlinkinfo));
+		} else {
+			rc = -EIO;
+			cFYI(1, ("Invalid return data count on "
+				 "get reparse info ioctl"));
 		}
+		symlinkinfo[buflen] = 0; /* just in case so the caller
+					does not go off the end of the buffer */
+		cFYI(1, ("readlink result - %s", symlinkinfo));
 	}
+	
 qreparse_out:
 	cifs_buf_release(pSMB);
 
@@ -2672,6 +2667,7 @@ qreparse_out:
 
 	return rc;
 }
+#endif /* CIFS_EXPERIMENTAL */
 
 #ifdef CONFIG_CIFS_POSIX
 
-- 
GitLab


From 989c7e512f4dc976b10803ab0c449bdaaf3eaabd Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 05:32:20 +0000
Subject: [PATCH 1080/1421] [CIFS] remove checkpatch warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 0ac32bd336d..259f633ca59 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2658,7 +2658,7 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 					does not go off the end of the buffer */
 		cFYI(1, ("readlink result - %s", symlinkinfo));
 	}
-	
+
 qreparse_out:
 	cifs_buf_release(pSMB);
 
-- 
GitLab


From 24d35add2bd09a427cacb7a39e14f3e47ed4d766 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 05:40:39 +0000
Subject: [PATCH 1081/1421] [CIFS] Remove sparse warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 259f633ca59..4e10efd2432 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2573,7 +2573,6 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 {
 	int rc = 0;
 	int bytes_returned;
-	int name_len;
 	struct smb_com_transaction_ioctl_req *pSMB;
 	struct smb_com_transaction_ioctl_rsp *pSMBr;
 
-- 
GitLab


From 74a03b69d1b5ce00a568e142ca97e76b7f5239c6 Mon Sep 17 00:00:00 2001
From: john stultz <johnstul@us.ibm.com>
Date: Fri, 1 May 2009 13:10:25 -0700
Subject: [PATCH 1082/1421] clockevents: prevent endless loop in
 tick_handle_periodic()

tick_handle_periodic() can lock up hard when a one shot clock event
device is used in combination with jiffies clocksource.

Avoid an endless loop issue by requiring that a highres valid
clocksource be installed before we call tick_periodic() in a loop when
using ONESHOT mode. The result is we will only increment jiffies once
per interrupt until a continuous hardware clocksource is available.

Without this, we can run into a endless loop, where each cycle through
the loop, jiffies is updated which increments time by tick_period or
more (due to clock steering), which can cause the event programming to
think the next event was before the newly incremented time and fail
causing tick_periodic() to be called again and the whole process loops
forever.

[ Impact: prevent hard lock up ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
---
 kernel/time/tick-common.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 21a5ca84951..83c4417b6a3 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -93,7 +93,17 @@ void tick_handle_periodic(struct clock_event_device *dev)
 	for (;;) {
 		if (!clockevents_program_event(dev, next, ktime_get()))
 			return;
-		tick_periodic(cpu);
+		/*
+		 * Have to be careful here. If we're in oneshot mode,
+		 * before we call tick_periodic() in a loop, we need
+		 * to be sure we're using a real hardware clocksource.
+		 * Otherwise we could get trapped in an infinite
+		 * loop, as the tick_periodic() increments jiffies,
+		 * when then will increment time, posibly causing
+		 * the loop to trigger again and again.
+		 */
+		if (timekeeping_valid_for_hres())
+			tick_periodic(cpu);
 		next = ktime_add(next, tick_period);
 	}
 }
-- 
GitLab


From 9c88b06dc7589fb0bccd617c4659066fb803cfda Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Sat, 2 May 2009 20:29:00 +0900
Subject: [PATCH 1083/1421] m32r: build fix for __stringify macro

This patch fixes the following build error of 2.6.30-rc3-git2:

      AS      arch/m32r/kernel/head.o
    In file included from /include/linux/init.h:7,
                     from /arch/m32r/kernel/head.S:11:
    /include/linux/stringify.h:9: error: syntax error in macro parameter list
    /include/linux/stringify.h:10: error: syntax error in macro parameter list

This build error was caused at __HEAD macro in arch/m32r/kernel/head.S,
which uses __stringify() macro.

Remove -traditional option from EXTRA_AFLAGS for the m32r,
because the __stringify() macro depends on the gcc's variadic macro
extension function, due to commit:

    Make __stringify support variable argument macros too
    commit: 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/boot/compressed/Makefile | 1 -
 arch/m32r/kernel/Makefile          | 2 --
 2 files changed, 3 deletions(-)

diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile
index d908e1d3c07..560484ae35e 100644
--- a/arch/m32r/boot/compressed/Makefile
+++ b/arch/m32r/boot/compressed/Makefile
@@ -6,7 +6,6 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
 		   piggy.o vmlinux.lds
-EXTRA_AFLAGS	:= -traditional
 
 OBJECTS = $(obj)/head.o $(obj)/misc.o
 
diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile
index 09200d4886e..b1a4b603659 100644
--- a/arch/m32r/kernel/Makefile
+++ b/arch/m32r/kernel/Makefile
@@ -9,5 +9,3 @@ obj-y	:= process.o entry.o traps.o align.o irq.o setup.o time.o \
 
 obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_MODULES)		+= module.o
-
-EXTRA_AFLAGS	:= -traditional
-- 
GitLab


From 9cd67243de582c206758adff152c5fcc1b2aa069 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Sat, 2 May 2009 22:08:33 +0900
Subject: [PATCH 1084/1421] m32r: use __stringify() macro in assembler.h

Replace #x with __stringify(x).
Also, #ifndef __STR is removed and undefine __STR macro at the beginning.

The __STR() macro is still remained, because the assembler.h might be
included from assembly codes as well as C codes.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/include/asm/assembler.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h
index 26351539b5f..728799fc70a 100644
--- a/arch/m32r/include/asm/assembler.h
+++ b/arch/m32r/include/asm/assembler.h
@@ -9,14 +9,15 @@
  * This file contains M32R architecture specific macro definitions.
  */
 
+#include <linux/stringify.h>
+
+#undef __STR
 
-#ifndef __STR
 #ifdef __ASSEMBLY__
 #define __STR(x) x
 #else
-#define __STR(x) #x
+#define __STR(x) __stringify(x)
 #endif
-#endif /* __STR */
 
 #ifdef CONFIG_SMP
 #define M32R_LOCK	__STR(lock)
-- 
GitLab


From 53951bd57dfe2da58f86cdf276719082d80d8485 Mon Sep 17 00:00:00 2001
From: Robert Moore <robert.moore@intel.com>
Date: Sat, 2 May 2009 11:48:37 -0700
Subject: [PATCH 1085/1421] acpica: validate package element more carefully in
 acpi_rs_get_pci_routing_table_length

acpi_rs_get_pci_routing_table_length is not performing sufficient
validation on the package returned from _PRT.  It assumes a package of
packages and fails/faults if this is not the case.

We should validate each subpackage when extracted from the parent
package, and not accept objects of the wrong type, since that will just
cause the scanning to fail (likely with a kernel oops).

This can only happen with a serious BIOS bug, and is accompanied by a
warning something like this:

  ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/acpi/acpica/rscalc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index b6667ff059e..88b5a2c4814 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 
 		package_element = *top_object_list;
 
+		/* We must have a valid Package object */
+
+		if (!package_element ||
+		    (package_element->common.type != ACPI_TYPE_PACKAGE)) {
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
 		/*
 		 * The sub_object_list will now point to an array of the
 		 * four IRQ elements: Address, Pin, Source and source_index
-- 
GitLab


From bc43f75cd9815833b27831600ccade672edb5e43 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@cmpxchg.org>
Date: Thu, 30 Apr 2009 15:08:08 -0700
Subject: [PATCH 1086/1421] mm: fix pageref leak in do_swap_page()

By the time the memory cgroup code is notified about a swapin we
already hold a reference on the fault page.

If the cgroup callback fails make sure to unlock AND release the page
reference which was taken by lookup_swap_cach(), or we leak the reference.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memory.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index cf6873e91c6..6a4ef0fd071 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2458,8 +2458,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 
 	if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) {
 		ret = VM_FAULT_OOM;
-		unlock_page(page);
-		goto out;
+		goto out_page;
 	}
 
 	/*
@@ -2521,6 +2520,7 @@ out:
 out_nomap:
 	mem_cgroup_cancel_charge_swapin(ptr);
 	pte_unmap_unlock(page_table, ptl);
+out_page:
 	unlock_page(page);
 	page_cache_release(page);
 	return ret;
-- 
GitLab


From a8985f3ac503b51c5abf8883fc4fb912e13b955c Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Thu, 30 Apr 2009 15:08:09 -0700
Subject: [PATCH 1087/1421] autofs4: fix incorrect return in
 autofs4_mount_busy()

Fix an obvious incorrect return status in autofs4_mount_busy().

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/expire.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 75f7ddacf7d..3077d8f1652 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -70,8 +70,10 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
 		 * Otherwise it's an offset mount and we need to check
 		 * if we can umount its mount, if there is one.
 		 */
-		if (!d_mountpoint(dentry))
+		if (!d_mountpoint(dentry)) {
+			status = 0;
 			goto done;
+		}
 	}
 
 	/* Update the expiry counter if fs is busy */
-- 
GitLab


From 1e50cc9022d6c0b9175d804573e3f401d00d1381 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Thu, 30 Apr 2009 15:08:10 -0700
Subject: [PATCH 1088/1421] MAINTAINERS: Florian has moved

I will finish school soon, so replace my student address with this one.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index c547f4a2bb6..585b2446549 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4666,13 +4666,13 @@ F:	kernel/rcutorture.c
 
 RDC R-321X SoC
 P:	Florian Fainelli
-M:	florian.fainelli@telecomint.eu
+M:	florian@openwrt.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
 P:	Florian Fainelli
-M:	florian.fainelli@telecomint.eu
+M:	florian@openwrt.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r6040.c
-- 
GitLab


From c0bd3f63ce01a1757dbce6373122a05fbf99ced7 Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Thu, 30 Apr 2009 15:08:11 -0700
Subject: [PATCH 1089/1421] memcg: fix try_get_mem_cgroup_from_swapcache()

This is a bugfix for commit 3c776e64660028236313f0e54f3a9945764422df
("memcg: charge swapcache to proper memcg").

Used bit of swapcache is solid under page lock, but considering
move_account, pc->mem_cgroup is not.

We need lock_page_cgroup() anyway.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e44fb0fbb80..575203ae210 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1024,9 +1024,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page)
 		return NULL;
 
 	pc = lookup_page_cgroup(page);
-	/*
-	 * Used bit of swapcache is solid under page lock.
-	 */
+	lock_page_cgroup(pc);
 	if (PageCgroupUsed(pc)) {
 		mem = pc->mem_cgroup;
 		if (mem && !css_tryget(&mem->css))
@@ -1040,6 +1038,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page)
 			mem = NULL;
 		rcu_read_unlock();
 	}
+	unlock_page_cgroup(pc);
 	return mem;
 }
 
-- 
GitLab


From cf94a4d116fa7a1b81868d4b5410a41efe831a49 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 30 Apr 2009 15:08:12 -0700
Subject: [PATCH 1090/1421] MAINTAINERS: add ptrace entry

Add Roland and Oleg as formal ptrace maintainers, they've been doing the
job for a while.

Includes the file patterns requested by Joe.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 585b2446549..066644a8fbc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4521,6 +4521,19 @@ M:	jim@jtan.com
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
 
+PTRACE SUPPORT
+P:	Roland McGrath
+M:	roland@redhat.com
+P:	Oleg Nesterov
+M:	oleg@redhat.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	include/asm-generic/syscall.h
+F:	include/linux/ptrace.h
+F:	include/linux/regset.h
+F:	include/linux/tracehook.h
+F:	kernel/ptrace.c
+
 PVRUSB2 VIDEO4LINUX DRIVER
 P:	Mike Isely
 M:	isely@pobox.com
-- 
GitLab


From 9e040a3e915d0a3da6caa665da7a458973e8f33e Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <Jesper.Nilsson@axis.com>
Date: Thu, 30 Apr 2009 15:08:13 -0700
Subject: [PATCH 1091/1421] CRISv10: fix serial driver proc-usage

drivers/serial/crisv10.c:4428: error: unknown field 'read_proc' specified in initializer

Commit 0f043a81ebe84be3576667f04fdda481609e3816 ("proc tty: remove struct
tty_operations::read_proc") removes the read_proc entry from struct
tty_operations.

Rework the proc handling in the CRISv10 serial driver to use proc_fops
instead.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/crisv10.c | 173 ++++++++++++++++++---------------------
 1 file changed, 78 insertions(+), 95 deletions(-)

diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 7ba7d70f04d..7be52fe288e 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $";
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
 #include <linux/kernel.h>
 #include <linux/mutex.h>
 #include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
 #include <asm/system.h>
-#include <linux/delay.h>
 
 #include <arch/svinto.h>
 
@@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = {
 
 #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
 
-static struct ktermios *serial_termios[NR_PORTS];
 #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
 static struct fast_timer fast_timers[NR_PORTS];
 #endif
@@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	return 0;
 }
 
+#ifdef CONFIG_PROC_FS
 /*
  * /proc fs routines....
  */
 
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
 {
-	char	stat_buf[30];
-	int	ret;
 	unsigned long tmp;
 
-	ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
-		      info->line, (unsigned long)info->ioport, info->irq);
+	seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+		   info->line, (unsigned long)info->ioport, info->irq);
 
 	if (!info->ioport || (info->type == PORT_UNKNOWN)) {
-		ret += sprintf(buf+ret, "\n");
-		return ret;
+		seq_printf(m, "\n");
+		return;
 	}
 
-	stat_buf[0] = 0;
-	stat_buf[1] = 0;
-	if (!E100_RTS_GET(info))
-		strcat(stat_buf, "|RTS");
-	if (!E100_CTS_GET(info))
-		strcat(stat_buf, "|CTS");
-	if (!E100_DTR_GET(info))
-		strcat(stat_buf, "|DTR");
-	if (!E100_DSR_GET(info))
-		strcat(stat_buf, "|DSR");
-	if (!E100_CD_GET(info))
-		strcat(stat_buf, "|CD");
-	if (!E100_RI_GET(info))
-		strcat(stat_buf, "|RI");
-
-	ret += sprintf(buf+ret, " baud:%d", info->baud);
-
-	ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+	seq_printf(m, " baud:%d", info->baud);
+	seq_printf(m, " tx:%lu rx:%lu",
 		       (unsigned long)info->icount.tx,
 		       (unsigned long)info->icount.rx);
 	tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-	if (tmp) {
-		ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
-			       (unsigned long)tmp,
-			       (unsigned long)SERIAL_XMIT_SIZE);
-	}
+	if (tmp)
+		seq_printf(m, " tx_pend:%lu/%lu",
+			   (unsigned long)tmp,
+			   (unsigned long)SERIAL_XMIT_SIZE);
 
-	ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
-		       (unsigned long)info->recv_cnt,
-		       (unsigned long)info->max_recv_cnt);
+	seq_printf(m, " rx_pend:%lu/%lu",
+		   (unsigned long)info->recv_cnt,
+		   (unsigned long)info->max_recv_cnt);
 
 #if 1
 	if (info->port.tty) {
-
 		if (info->port.tty->stopped)
-			ret += sprintf(buf+ret, " stopped:%i",
-				       (int)info->port.tty->stopped);
+			seq_printf(m, " stopped:%i",
+				   (int)info->port.tty->stopped);
 		if (info->port.tty->hw_stopped)
-			ret += sprintf(buf+ret, " hw_stopped:%i",
-				       (int)info->port.tty->hw_stopped);
+			seq_printf(m, " hw_stopped:%i",
+				   (int)info->port.tty->hw_stopped);
 	}
 
 	{
 		unsigned char rstat = info->ioport[REG_STATUS];
-		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
-			ret += sprintf(buf+ret, " xoff_detect:1");
+		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+			seq_printf(m, " xoff_detect:1");
 	}
 
 #endif
 
-
-
-
 	if (info->icount.frame)
-		ret += sprintf(buf+ret, " fe:%lu",
-			       (unsigned long)info->icount.frame);
+		seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
 
 	if (info->icount.parity)
-		ret += sprintf(buf+ret, " pe:%lu",
-			       (unsigned long)info->icount.parity);
+		seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
 
 	if (info->icount.brk)
-		ret += sprintf(buf+ret, " brk:%lu",
-			       (unsigned long)info->icount.brk);
+		seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
 
 	if (info->icount.overrun)
-		ret += sprintf(buf+ret, " oe:%lu",
-			       (unsigned long)info->icount.overrun);
+		seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
 
 	/*
 	 * Last thing is the RS-232 status lines
 	 */
-	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-	return ret;
+	if (!E100_RTS_GET(info))
+		seq_puts(m, "|RTS");
+	if (!E100_CTS_GET(info))
+		seq_puts(m, "|CTS");
+	if (!E100_DTR_GET(info))
+		seq_puts(m, "|DTR");
+	if (!E100_DSR_GET(info))
+		seq_puts(m, "|DSR");
+	if (!E100_CD_GET(info))
+		seq_puts(m, "|CD");
+	if (!E100_RI_GET(info))
+		seq_puts(m, "|RI");
+	seq_puts(m, "\n");
 }
 
-int rs_read_proc(char *page, char **start, off_t off, int count,
-		 int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
 {
-	int i, len = 0, l;
-	off_t	begin = 0;
+	int i;
 
-	len += sprintf(page, "serinfo:1.0 driver:%s\n",
-		       serial_version);
-	for (i = 0; i < NR_PORTS && len < 4000; i++) {
+	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+	for (i = 0; i < NR_PORTS; i++) {
 		if (!rs_table[i].enabled)
 			continue;
-		l = line_info(page + len, &rs_table[i]);
-		len += l;
-		if (len+begin > off+count)
-			goto done;
-		if (len+begin < off) {
-			begin += len;
-			len = 0;
-		}
+		seq_line_info(m, &rs_table[i]);
 	}
 #ifdef DEBUG_LOG_INCLUDED
 	for (i = 0; i < debug_log_pos; i++) {
-		len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
-		len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
-		if (len+begin > off+count)
-			goto done;
-		if (len+begin < off) {
-			begin += len;
-			len = 0;
-		}
+		seq_printf(m, "%-4i %lu.%lu ",
+			 i, debug_log[i].time,
+			 timer_data_to_ns(debug_log[i].timer_data));
+		seq_printf(m, debug_log[i].string, debug_log[i].value);
 	}
-	len += sprintf(page + len, "debug_log %i/%i  %li bytes\n",
-		       i, DEBUG_LOG_SIZE, begin+len);
+	seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
 	debug_log_pos = 0;
 #endif
+	return 0;
+}
 
-	*eof = 1;
-done:
-	if (off >= len+begin)
-		return 0;
-	*start = page + (off-begin);
-	return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, crisv10_proc_show, NULL);
 }
 
+static const struct file_operations crisv10_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= crisv10_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+#endif
+
+
 /* Finally, routines used to initialize the serial driver. */
 
-static void
-show_serial_version(void)
+static void show_serial_version(void)
 {
 	printk(KERN_INFO
-	       "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+	       "ETRAX 100LX serial-driver %s, "
+	       "(c) 2000-2004 Axis Communications AB\r\n",
 	       &serial_version[11]); /* "$Revision: x.yy" */
 }
 
@@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = {
 	.break_ctl = rs_break,
 	.send_xchar = rs_send_xchar,
 	.wait_until_sent = rs_wait_until_sent,
-	.read_proc = rs_read_proc,
 	.tiocmget = rs_tiocmget,
-	.tiocmset = rs_tiocmset
+	.tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+	.proc_fops = &crisv10_proc_fops,
+#endif
 };
 
-static int __init
-rs_init(void)
+static int __init rs_init(void)
 {
 	int i;
 	struct e100_serial *info;
-- 
GitLab


From a5fc1abe438b87a9d128beebc377f78e2681a76d Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 30 Apr 2009 15:08:14 -0700
Subject: [PATCH 1092/1421] atomic: fix atomic_long_cmpxchg/xchg for 64 bit
 architectures

On a linux-next allyesconfig build:

kernel/trace/ring_buffer.c:1726:
	warning: passing argument 1 of 'atomic_cmpxchg' from incompatible pointer type
linux-next/arch/s390/include/asm/atomic.h:112:
	note: expected 'struct atomic_t *' but argument is of type 'struct atomic64_t *'

atomic_long_cmpxchg and atomic_long_xchg are incorrectly defined for 64
bit architectures.  They should be mapped to the atomic64_* variants.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/atomic.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 7abdaa91ccd..3673a13b670 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -132,9 +132,9 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
 #define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
 
 #define atomic_long_cmpxchg(l, old, new) \
-	(atomic_cmpxchg((atomic64_t *)(l), (old), (new)))
+	(atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
 #define atomic_long_xchg(v, new) \
-	(atomic_xchg((atomic64_t *)(l), (new)))
+	(atomic64_xchg((atomic64_t *)(l), (new)))
 
 #else  /*  BITS_PER_LONG == 64  */
 
-- 
GitLab


From b827e496c893de0c0f142abfaeb8730a2fd6b37f Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Thu, 30 Apr 2009 15:08:16 -0700
Subject: [PATCH 1093/1421] mm: close page_mkwrite races

Change page_mkwrite to allow implementations to return with the page
locked, and also change it's callers (in page fault paths) to hold the
lock until the page is marked dirty.  This allows the filesystem to have
full control of page dirtying events coming from the VM.

Rather than simply hold the page locked over the page_mkwrite call, we
call page_mkwrite with the page unlocked and allow callers to return with
it locked, so filesystems can avoid LOR conditions with page lock.

The problem with the current scheme is this: a filesystem that wants to
associate some metadata with a page as long as the page is dirty, will
perform this manipulation in its ->page_mkwrite.  It currently then must
return with the page unlocked and may not hold any other locks (according
to existing page_mkwrite convention).

In this window, the VM could write out the page, clearing page-dirty.  The
filesystem has no good way to detect that a dirty pte is about to be
attached, so it will happily write out the page, at which point, the
filesystem may manipulate the metadata to reflect that the page is no
longer dirty.

It is not always possible to perform the required metadata manipulation in
->set_page_dirty, because that function cannot block or fail.  The
filesystem may need to allocate some data structure, for example.

And the VM cannot mark the pte dirty before page_mkwrite, because
page_mkwrite is allowed to fail, so we must not allow any window where the
page could be written to if page_mkwrite does fail.

This solution of holding the page locked over the 3 critical operations
(page_mkwrite, setting the pte dirty, and finally setting the page dirty)
closes out races nicely, preventing page cleaning for writeout being
initiated in that window.  This provides the filesystem with a strong
synchronisation against the VM here.

- Sage needs this race closed for ceph filesystem.
- Trond for NFS (http://bugzilla.kernel.org/show_bug.cgi?id=12913).
- I need it for fsblock.
- I suspect other filesystems may need it too (eg. btrfs).
- I have converted buffer.c to the new locking. Even simple block allocation
  under dirty pages might be susceptible to i_size changing under partial page
  at the end of file (we also have a buffer.c-side problem here, but it cannot
  be fixed properly without this patch).
- Other filesystems (eg. NFS, maybe btrfs) will need to change their
  page_mkwrite functions themselves.

[ This also moves page_mkwrite another step closer to fault, which should
  eventually allow page_mkwrite to be moved into ->fault, and thus avoiding a
  filesystem calldown and page lock/unlock cycle in __do_fault. ]

[akpm@linux-foundation.org: fix derefs of NULL ->mapping]
Cc: Sage Weil <sage@newdream.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/Locking |  24 ++++---
 fs/buffer.c                       |  10 +--
 mm/memory.c                       | 108 +++++++++++++++++++++---------
 3 files changed, 98 insertions(+), 44 deletions(-)

diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 76efe5b71d7..3120f8dd2c3 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -512,16 +512,24 @@ locking rules:
 		BKL	mmap_sem	PageLocked(page)
 open:		no	yes
 close:		no	yes
-fault:		no	yes
-page_mkwrite:	no	yes		no
+fault:		no	yes		can return with page locked
+page_mkwrite:	no	yes		can return with page locked
 access:		no	yes
 
-	->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+	->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+	->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
 
 	->access() is called when get_user_pages() fails in
 acces_process_vm(), typically used to debug a process through
diff --git a/fs/buffer.c b/fs/buffer.c
index b3e5be7514f..aed297739eb 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2397,7 +2397,8 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
 	if ((page->mapping != inode->i_mapping) ||
 	    (page_offset(page) > size)) {
 		/* page got truncated out from underneath us */
-		goto out_unlock;
+		unlock_page(page);
+		goto out;
 	}
 
 	/* page is wholly or partially inside EOF */
@@ -2411,14 +2412,15 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
 		ret = block_commit_write(page, 0, end);
 
 	if (unlikely(ret)) {
+		unlock_page(page);
 		if (ret == -ENOMEM)
 			ret = VM_FAULT_OOM;
 		else /* -ENOSPC, -EIO, etc */
 			ret = VM_FAULT_SIGBUS;
-	}
+	} else
+		ret = VM_FAULT_LOCKED;
 
-out_unlock:
-	unlock_page(page);
+out:
 	return ret;
 }
 
diff --git a/mm/memory.c b/mm/memory.c
index 6a4ef0fd071..4126dd16778 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1971,6 +1971,15 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 				ret = tmp;
 				goto unwritable_page;
 			}
+			if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+				lock_page(old_page);
+				if (!old_page->mapping) {
+					ret = 0; /* retry the fault */
+					unlock_page(old_page);
+					goto unwritable_page;
+				}
+			} else
+				VM_BUG_ON(!PageLocked(old_page));
 
 			/*
 			 * Since we dropped the lock we need to revalidate
@@ -1980,9 +1989,11 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			 */
 			page_table = pte_offset_map_lock(mm, pmd, address,
 							 &ptl);
-			page_cache_release(old_page);
-			if (!pte_same(*page_table, orig_pte))
+			if (!pte_same(*page_table, orig_pte)) {
+				unlock_page(old_page);
+				page_cache_release(old_page);
 				goto unlock;
+			}
 
 			page_mkwrite = 1;
 		}
@@ -2094,9 +2105,6 @@ gotten:
 unlock:
 	pte_unmap_unlock(page_table, ptl);
 	if (dirty_page) {
-		if (vma->vm_file)
-			file_update_time(vma->vm_file);
-
 		/*
 		 * Yes, Virginia, this is actually required to prevent a race
 		 * with clear_page_dirty_for_io() from clearing the page dirty
@@ -2105,16 +2113,41 @@ unlock:
 		 *
 		 * do_no_page is protected similarly.
 		 */
-		wait_on_page_locked(dirty_page);
-		set_page_dirty_balance(dirty_page, page_mkwrite);
+		if (!page_mkwrite) {
+			wait_on_page_locked(dirty_page);
+			set_page_dirty_balance(dirty_page, page_mkwrite);
+		}
 		put_page(dirty_page);
+		if (page_mkwrite) {
+			struct address_space *mapping = dirty_page->mapping;
+
+			set_page_dirty(dirty_page);
+			unlock_page(dirty_page);
+			page_cache_release(dirty_page);
+			if (mapping)	{
+				/*
+				 * Some device drivers do not set page.mapping
+				 * but still dirty their pages
+				 */
+				balance_dirty_pages_ratelimited(mapping);
+			}
+		}
+
+		/* file_update_time outside page_lock */
+		if (vma->vm_file)
+			file_update_time(vma->vm_file);
 	}
 	return ret;
 oom_free_new:
 	page_cache_release(new_page);
 oom:
-	if (old_page)
+	if (old_page) {
+		if (page_mkwrite) {
+			unlock_page(old_page);
+			page_cache_release(old_page);
+		}
 		page_cache_release(old_page);
+	}
 	return VM_FAULT_OOM;
 
 unwritable_page:
@@ -2664,27 +2697,22 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 				int tmp;
 
 				unlock_page(page);
-				vmf.flags |= FAULT_FLAG_MKWRITE;
+				vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
 				tmp = vma->vm_ops->page_mkwrite(vma, &vmf);
 				if (unlikely(tmp &
 					  (VM_FAULT_ERROR | VM_FAULT_NOPAGE))) {
 					ret = tmp;
-					anon = 1; /* no anon but release vmf.page */
-					goto out_unlocked;
-				}
-				lock_page(page);
-				/*
-				 * XXX: this is not quite right (racy vs
-				 * invalidate) to unlock and relock the page
-				 * like this, however a better fix requires
-				 * reworking page_mkwrite locking API, which
-				 * is better done later.
-				 */
-				if (!page->mapping) {
-					ret = 0;
-					anon = 1; /* no anon but release vmf.page */
-					goto out;
+					goto unwritable_page;
 				}
+				if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+					lock_page(page);
+					if (!page->mapping) {
+						ret = 0; /* retry the fault */
+						unlock_page(page);
+						goto unwritable_page;
+					}
+				} else
+					VM_BUG_ON(!PageLocked(page));
 				page_mkwrite = 1;
 			}
 		}
@@ -2736,19 +2764,35 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	pte_unmap_unlock(page_table, ptl);
 
 out:
-	unlock_page(vmf.page);
-out_unlocked:
-	if (anon)
-		page_cache_release(vmf.page);
-	else if (dirty_page) {
-		if (vma->vm_file)
-			file_update_time(vma->vm_file);
+	if (dirty_page) {
+		struct address_space *mapping = page->mapping;
 
-		set_page_dirty_balance(dirty_page, page_mkwrite);
+		if (set_page_dirty(dirty_page))
+			page_mkwrite = 1;
+		unlock_page(dirty_page);
 		put_page(dirty_page);
+		if (page_mkwrite && mapping) {
+			/*
+			 * Some device drivers do not set page.mapping but still
+			 * dirty their pages
+			 */
+			balance_dirty_pages_ratelimited(mapping);
+		}
+
+		/* file_update_time outside page_lock */
+		if (vma->vm_file)
+			file_update_time(vma->vm_file);
+	} else {
+		unlock_page(vmf.page);
+		if (anon)
+			page_cache_release(vmf.page);
 	}
 
 	return ret;
+
+unwritable_page:
+	page_cache_release(page);
+	return ret;
 }
 
 static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-- 
GitLab


From 0816178638c15ce5472d39d771a96860dff4141a Mon Sep 17 00:00:00 2001
From: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Date: Thu, 30 Apr 2009 15:08:18 -0700
Subject: [PATCH 1094/1421] pagemap: require aligned-length, non-null reads of
 /proc/pid/pagemap

The intention of commit aae8679b0ebcaa92f99c1c3cb0cd651594a43915
("pagemap: fix bug in add_to_pagemap, require aligned-length reads of
/proc/pid/pagemap") was to force reads of /proc/pid/pagemap to be a
multiple of 8 bytes, but now it allows to read 0 bytes, which actually
puts some data to user's buffer.  According to POSIX, if count is zero,
read() should return zero and has no other results.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Cc: Thomas Tuttle <ttuttle@google.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/task_mmu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 39e4ad4f59f..6f61b7cc32e 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -665,6 +665,10 @@ static ssize_t pagemap_read(struct file *file, char __user *buf,
 		goto out_task;
 
 	ret = 0;
+
+	if (!count)
+		goto out_task;
+
 	mm = get_task_mm(task);
 	if (!mm)
 		goto out_task;
-- 
GitLab


From ae3abae64f177586be55b04a7fb7047a34b21a3e Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Thu, 30 Apr 2009 15:08:19 -0700
Subject: [PATCH 1095/1421] memcg: fix mem_cgroup_shrink_usage()

Current mem_cgroup_shrink_usage() has two problems.

1. It doesn't call mem_cgroup_out_of_memory and doesn't update
   last_oom_jiffies, so pagefault_out_of_memory invokes global OOM.

2. Considering hierarchy, shrinking has to be done from the
   mem_over_limit, not from the memcg which the page would be charged to.

mem_cgroup_try_charge_swapin() does all of these things properly, so we
use it and call cancel_charge_swapin when it succeeded.

The name of "shrink_usage" is not appropriate for this behavior, so we
change it too.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/memcontrol.h |  4 ++--
 mm/memcontrol.c            | 33 ++++++++++++---------------------
 mm/shmem.c                 |  8 ++++++--
 3 files changed, 20 insertions(+), 25 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index a9e3b76aa88..25b9ca93d23 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -56,7 +56,7 @@ extern void mem_cgroup_move_lists(struct page *page,
 				  enum lru_list from, enum lru_list to);
 extern void mem_cgroup_uncharge_page(struct page *page);
 extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern int mem_cgroup_shrink_usage(struct page *page,
+extern int mem_cgroup_shmem_charge_fallback(struct page *page,
 			struct mm_struct *mm, gfp_t gfp_mask);
 
 extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
@@ -155,7 +155,7 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page)
 {
 }
 
-static inline int mem_cgroup_shrink_usage(struct page *page,
+static inline int mem_cgroup_shmem_charge_fallback(struct page *page,
 			struct mm_struct *mm, gfp_t gfp_mask)
 {
 	return 0;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 575203ae210..01c2d8f1468 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1617,37 +1617,28 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
 }
 
 /*
- * A call to try to shrink memory usage under specified resource controller.
- * This is typically used for page reclaiming for shmem for reducing side
- * effect of page allocation from shmem, which is used by some mem_cgroup.
+ * A call to try to shrink memory usage on charge failure at shmem's swapin.
+ * Calling hierarchical_reclaim is not enough because we should update
+ * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM.
+ * Moreover considering hierarchy, we should reclaim from the mem_over_limit,
+ * not from the memcg which this page would be charged to.
+ * try_charge_swapin does all of these works properly.
  */
-int mem_cgroup_shrink_usage(struct page *page,
+int mem_cgroup_shmem_charge_fallback(struct page *page,
 			    struct mm_struct *mm,
 			    gfp_t gfp_mask)
 {
 	struct mem_cgroup *mem = NULL;
-	int progress = 0;
-	int retry = MEM_CGROUP_RECLAIM_RETRIES;
+	int ret;
 
 	if (mem_cgroup_disabled())
 		return 0;
-	if (page)
-		mem = try_get_mem_cgroup_from_swapcache(page);
-	if (!mem && mm)
-		mem = try_get_mem_cgroup_from_mm(mm);
-	if (unlikely(!mem))
-		return 0;
 
-	do {
-		progress = mem_cgroup_hierarchical_reclaim(mem,
-					gfp_mask, true, false);
-		progress += mem_cgroup_check_under_limit(mem);
-	} while (!progress && --retry);
+	ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+	if (!ret)
+		mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */
 
-	css_put(&mem->css);
-	if (!retry)
-		return -ENOMEM;
-	return 0;
+	return ret;
 }
 
 static DEFINE_MUTEX(set_limit_mutex);
diff --git a/mm/shmem.c b/mm/shmem.c
index f9cb20ebb99..b25f95ce3db 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1340,8 +1340,12 @@ repeat:
 			shmem_swp_unmap(entry);
 			spin_unlock(&info->lock);
 			if (error == -ENOMEM) {
-				/* allow reclaim from this memory cgroup */
-				error = mem_cgroup_shrink_usage(swappage,
+				/*
+				 * reclaim from proper memory cgroup and
+				 * call memcg's OOM if needed.
+				 */
+				error = mem_cgroup_shmem_charge_fallback(
+								swappage,
 								current->mm,
 								gfp);
 				if (error) {
-- 
GitLab


From b175dc09285b36200a83b78baf167905181fb4e5 Mon Sep 17 00:00:00 2001
From: Stefan Bader <stefan.bader@canonical.com>
Date: Thu, 30 Apr 2009 15:08:44 -0700
Subject: [PATCH 1096/1421] vgacon: return the upper half of 512 character
 fonts

Uwe Geuder noted that he gets random bitmaps on a text console if he tried
to type extended characters (like the e acute).  For him everything above
unicode 0xa0 was corrupted.

After some digging there seems to be a little culprit in vgacon since the
beginning of ages (well git).  The function vgacon_font_get will store the
number of characters correctly in font->charcount but then calls to
vgacon_do_font_op(..., 0, 0).  Which means only the lower 256 characters
are actually stored to the fontdata.  The rest is left untouched.  So the
next time that saved data is used, the garbled font appears.  This happens
on every switch between text consoles.

Addresses https://bugs.launchpad.net/ubuntu/+source/linux/+bug/355057

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Uwe Geuder <ubuntuLp-ugeuder@sneakemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/vgacon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index d012edda6d1..38e86b84dce 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1282,7 +1282,7 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font)
 	font->charcount = vga_512_chars ? 512 : 256;
 	if (!font->data)
 		return 0;
-	return vgacon_do_font_op(&state, font->data, 0, 0);
+	return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
 }
 
 #else
-- 
GitLab


From 1ffb1c0c64b4a2b75eed1f63cc47f2beb711c92f Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 30 Apr 2009 15:08:45 -0700
Subject: [PATCH 1097/1421] alpha: titan and marvel build fixes

These platforms got broken after u64 => 'long long' conversion.

Apparently that change was compile-tested with 'make allmodconfig', but it
doesn't include systems that depend on !ALPHA_LEGACY_START_ADDRESS.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/err_ev6.c    |  2 +-
 arch/alpha/kernel/err_ev7.c    |  4 ++--
 arch/alpha/kernel/err_impl.h   | 10 +++++-----
 arch/alpha/kernel/err_marvel.c |  2 +-
 arch/alpha/kernel/err_titan.c  |  4 ++--
 arch/alpha/kernel/proto.h      |  5 ++---
 6 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c
index 985e5c1681a..8ca6345bf13 100644
--- a/arch/alpha/kernel/err_ev6.c
+++ b/arch/alpha/kernel/err_ev6.c
@@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 
diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c
index 73770c6ca01..d738a67112d 100644
--- a/arch/alpha/kernel/err_ev7.c
+++ b/arch/alpha/kernel/err_ev7.c
@@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
 }
 
 void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
 	char *saved_err_prefix = err_print_prefix;
@@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
 
 	switch(header->type) {
 	case EL_TYPE__PAL__LOGOUT_FRAME:
-		printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+		printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
 		       err_print_prefix,
 		       packet->by_type.logout.whami, 
 		       packet->by_type.logout.rbox_whami);
diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h
index 3c12258158e..0c010ca4611 100644
--- a/arch/alpha/kernel/err_impl.h
+++ b/arch/alpha/kernel/err_impl.h
@@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
 ev7_collect_logout_frame_subpackets(struct el_subpacket *,
 				    struct ev7_lf_subpackets *);
 extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
 
 /*
  * err_ev6.c
  */
 extern void ev6_register_error_handlers(void);
 extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
 
 /*
  * err_marvel.c
  */
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_register_error_handlers(void);
 
 /*
  * err_titan.c
  */
 extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
 extern void titan_register_error_handlers(void);
 extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
index 6bfd243efba..52a79dfc13c 100644
--- a/arch/alpha/kernel/err_marvel.c
+++ b/arch/alpha/kernel/err_marvel.c
@@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
 }
 
 void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
 	int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index c7e28a88d6e..f7ed97ce0df 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 	struct el_TITAN_sysdata_mcheck *tmchk =
@@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 	struct el_TITAN_sysdata_mcheck *tmchk =
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 567f2598d09..3d2627ec986 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops irongate_pci_ops;
 extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
 #define irongate_pci_tbi ((void *)0)
 
 /* core_lca.c */
@@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
 extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern int marvel_pa_to_nid(unsigned long);
 extern int marvel_cpuid_to_nid(int);
@@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops titan_pci_ops;
 extern void titan_init_arch(void);
 extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
 extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct _alpha_agp_info *titan_agp_info(void);
 
-- 
GitLab


From 08a42e86bce511b45ca3eee40f51674b02a777d1 Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 30 Apr 2009 15:08:47 -0700
Subject: [PATCH 1098/1421] alpha: exception table sorting

Exception fixups for sections other than .text (like one in futex_init())
break the natural ordering of fixup entries, so sorting is required.

Without that the result of the exception table search depends on phase of
the moon.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/uaccess.h |  2 ++
 arch/alpha/mm/extable.c          | 40 +++++++++++++++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 163f3053001..b49ec2f8d6e 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -507,5 +507,7 @@ struct exception_table_entry
 	(pc) + (_fixup)->fixup.bits.nextinsn;			\
 })
 
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
 
 #endif /* __ALPHA_UACCESS_H */
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
index dc7aeda1577..62dc379d301 100644
--- a/arch/alpha/mm/extable.c
+++ b/arch/alpha/mm/extable.c
@@ -3,11 +3,49 @@
  */
 
 #include <linux/module.h>
+#include <linux/sort.h>
 #include <asm/uaccess.h>
 
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+	struct exception_table_entry *ex_a = a, *ex_b = b;
+	unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+	unsigned int t = ex_a->fixup.unit;
+
+	ex_a->fixup.unit = ex_b->fixup.unit;
+	ex_b->fixup.unit = t;
+	ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+	ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+	const struct exception_table_entry *x = a, *y = b;
+
+	/* avoid overflow */
+	if (ex_to_addr(x) > ex_to_addr(y))
+		return 1;
+	if (ex_to_addr(x) < ex_to_addr(y))
+		return -1;
+	return 0;
+}
+
 void sort_extable(struct exception_table_entry *start,
 		  struct exception_table_entry *finish)
 {
+	sort(start, finish - start, sizeof(struct exception_table_entry),
+	     cmp_ex, swap_ex);
 }
 
 const struct exception_table_entry *
@@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
 		unsigned long mid_value;
 
 		mid = (last - first) / 2 + first;
-		mid_value = (unsigned long)&mid->insn + mid->insn;
+		mid_value = ex_to_addr(mid);
                 if (mid_value == value)
                         return mid;
                 else if (mid_value < value)
-- 
GitLab


From 77b4cf5cb0c9d6010a18030a0e0a8d2aaf6b43ec Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 30 Apr 2009 15:08:48 -0700
Subject: [PATCH 1099/1421] alpha: futex implementation

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/barrier.h |   2 +
 arch/alpha/include/asm/futex.h   | 118 +++++++++++++++++++++++++++++--
 2 files changed, 116 insertions(+), 4 deletions(-)

diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
index ac78eba909b..ce8860a0b32 100644
--- a/arch/alpha/include/asm/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
@@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
 __asm__ __volatile__("mb": : :"memory")
 
 #ifdef CONFIG_SMP
+#define __ASM_SMP_MB	"\tmb\n"
 #define smp_mb()	mb()
 #define smp_rmb()	rmb()
 #define smp_wmb()	wmb()
 #define smp_read_barrier_depends()	read_barrier_depends()
 #else
+#define __ASM_SMP_MB
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
index 6a332a9f099..945de222ab9 100644
--- a/arch/alpha/include/asm/futex.h
+++ b/arch/alpha/include/asm/futex.h
@@ -1,6 +1,116 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
 
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
 
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(					\
+		__ASM_SMP_MB					\
+	"1:	ldl_l	%0,0(%2)\n"				\
+		insn						\
+	"2:	stl_c	%1,0(%2)\n"				\
+	"	beq	%1,4f\n"				\
+	"	mov	$31,%1\n"				\
+	"3:	.subsection 2\n"				\
+	"4:	br	1b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.long	1b-.\n"					\
+	"	lda	$31,3b-1b(%1)\n"			\
+	"	.long	2b-.\n"					\
+	"	lda	$31,3b-2b(%1)\n"			\
+	"	.previous\n"					\
+	:	"=&r" (oldval), "=&r"(ret)			\
+	:	"r" (uaddr), "r"(oparg)				\
+	:	"memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev, cmp;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	__asm__ __volatile__ (
+		__ASM_SMP_MB
+	"1:	ldl_l	%0,0(%2)\n"
+	"	cmpeq	%0,%3,%1\n"
+	"	beq	%1,3f\n"
+	"	mov	%4,%1\n"
+	"2:	stl_c	%1,0(%2)\n"
+	"	beq	%1,4f\n"
+	"3:	.subsection 2\n"
+	"4:	br	1b\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.long	1b-.\n"
+	"	lda	$31,3b-1b(%0)\n"
+	"	.long	2b-.\n"
+	"	lda	$31,3b-2b(%0)\n"
+	"	.previous\n"
+	:	"=&r"(prev), "=&r"(cmp)
+	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"memory");
+
+	return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */
-- 
GitLab


From 74641f584da8eccf30becfbb5507ab457187db22 Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 30 Apr 2009 15:08:49 -0700
Subject: [PATCH 1100/1421] alpha: binfmt_aout fix

This fixes the problem introduced by commit 3bfacef412 (get rid of
special-casing the /sbin/loader on alpha): osf/1 ecoff binary segfaults
when binfmt_aout built as module.  That happens because aout binary
handler gets on the top of the binfmt list due to late registration, and
kernel attempts to execute the binary without preparatory work that must
be done by binfmt_loader.

Fixed by changing the registration order of the default binfmt handlers
using list_add_tail() and introducing insert_binfmt() function which
places new handler on the top of the binfmt list.  This might be generally
useful for installing arch-specific frontends for default handlers or just
for overriding them.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/Makefile        |  6 +++++-
 arch/alpha/kernel/binfmt_loader.c |  2 +-
 fs/exec.c                         |  7 ++++---
 include/linux/binfmts.h           | 14 +++++++++++++-
 4 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index a427538252f..7739a62440a 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -8,7 +8,7 @@ EXTRA_CFLAGS	:= -Werror -Wno-sign-compare
 
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+	    alpha_ksyms.o systbls.o err_common.o io.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -43,6 +43,10 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
+ifdef CONFIG_BINFMT_AOUT
+obj-y	+= binfmt_loader.o
+endif
+
 # Core logic support
 obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
index 4a0af906b00..3fcfad41013 100644
--- a/arch/alpha/kernel/binfmt_loader.c
+++ b/arch/alpha/kernel/binfmt_loader.c
@@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
 
 static int __init init_loader_binfmt(void)
 {
-	return register_binfmt(&loader_format);
+	return insert_binfmt(&loader_format);
 }
 arch_initcall(init_loader_binfmt);
diff --git a/fs/exec.c b/fs/exec.c
index a3a8ce83940..639177b0eea 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -69,17 +69,18 @@ int suid_dumpable = 0;
 static LIST_HEAD(formats);
 static DEFINE_RWLOCK(binfmt_lock);
 
-int register_binfmt(struct linux_binfmt * fmt)
+int __register_binfmt(struct linux_binfmt * fmt, int insert)
 {
 	if (!fmt)
 		return -EINVAL;
 	write_lock(&binfmt_lock);
-	list_add(&fmt->lh, &formats);
+	insert ? list_add(&fmt->lh, &formats) :
+		 list_add_tail(&fmt->lh, &formats);
 	write_unlock(&binfmt_lock);
 	return 0;	
 }
 
-EXPORT_SYMBOL(register_binfmt);
+EXPORT_SYMBOL(__register_binfmt);
 
 void unregister_binfmt(struct linux_binfmt * fmt)
 {
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 6638b8148de..61ee18c1bdb 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -82,7 +82,19 @@ struct linux_binfmt {
 	int hasvdso;
 };
 
-extern int register_binfmt(struct linux_binfmt *);
+extern int __register_binfmt(struct linux_binfmt *fmt, int insert);
+
+/* Registration of default binfmt handlers */
+static inline int register_binfmt(struct linux_binfmt *fmt)
+{
+	return __register_binfmt(fmt, 0);
+}
+/* Same as above, but adds a new binfmt at the top of the list */
+static inline int insert_binfmt(struct linux_binfmt *fmt)
+{
+	return __register_binfmt(fmt, 1);
+}
+
 extern void unregister_binfmt(struct linux_binfmt *);
 
 extern int prepare_binprm(struct linux_binprm *);
-- 
GitLab


From 0763ed2355198cdef2f6a2098e9d52eb1fe4365d Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 30 Apr 2009 15:08:50 -0700
Subject: [PATCH 1101/1421] of: make of_(un)register_platform_driver common
 code

Some drivers using of_register_platform_driver() wrapper break on sparc
because the wrapper isn't in the header file.  This patch moves it from
Microblaze and PowerPC implementations and makes it common code.

Fixes this sparc64 allmodconfig build error (at least):

drivers/leds/leds-gpio.c: In function `gpio_led_init':
drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver'
drivers/leds/leds-gpio.c: In function `gpio_led_exit':
drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver'

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/microblaze/include/asm/of_platform.h | 10 ----------
 arch/powerpc/include/asm/of_platform.h    | 10 ----------
 include/linux/of_platform.h               | 10 ++++++++++
 3 files changed, 10 insertions(+), 20 deletions(-)

diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h
index 187c0eedaec..37491276c6c 100644
--- a/arch/microblaze/include/asm/of_platform.h
+++ b/arch/microblaze/include/asm/of_platform.h
@@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = {
 	{},
 };
 
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
-	return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
-	of_unregister_driver(drv);
-}
-
 /* Platform devices and busses creation */
 extern struct of_device *of_platform_device_create(struct device_node *np,
 						const char *bus_id,
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
index 53b46507ffd..d4aaa348944 100644
--- a/arch/powerpc/include/asm/of_platform.h
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -11,16 +11,6 @@
  *
  */
 
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
-	return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
-	of_unregister_driver(drv);
-}
-
 /* Platform devices and busses creation */
 extern struct of_device *of_platform_device_create(struct device_node *np,
 						   const char *bus_id,
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 3d327b67d7e..90840665133 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -51,6 +51,16 @@ extern int of_register_driver(struct of_platform_driver *drv,
 			      struct bus_type *bus);
 extern void of_unregister_driver(struct of_platform_driver *drv);
 
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+	return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+	of_unregister_driver(drv);
+}
+
 #include <asm/of_platform.h>
 
 extern struct of_device *of_find_device_by_node(struct device_node *np);
-- 
GitLab


From 00a62ce91e554198ef28234c91c36f850f5a3bc9 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Thu, 30 Apr 2009 15:08:51 -0700
Subject: [PATCH 1102/1421] mm: fix Committed_AS underflow on large NR_CPUS
 environment

The Committed_AS field can underflow in certain situations:

>         # while true; do cat /proc/meminfo  | grep _AS; sleep 1; done | uniq -c
>               1 Committed_AS: 18446744073709323392 kB
>              11 Committed_AS: 18446744073709455488 kB
>               6 Committed_AS:    35136 kB
>               5 Committed_AS: 18446744073709454400 kB
>               7 Committed_AS:    35904 kB
>               3 Committed_AS: 18446744073709453248 kB
>               2 Committed_AS:    34752 kB
>               9 Committed_AS: 18446744073709453248 kB
>               8 Committed_AS:    34752 kB
>               3 Committed_AS: 18446744073709320960 kB
>               7 Committed_AS: 18446744073709454080 kB
>               3 Committed_AS: 18446744073709320960 kB
>               5 Committed_AS: 18446744073709454080 kB
>               6 Committed_AS: 18446744073709320960 kB

Because NR_CPUS can be greater than 1000 and meminfo_proc_show() does
not check for underflow.

But NR_CPUS proportional isn't good calculation.  In general,
possibility of lock contention is proportional to the number of online
cpus, not theorical maximum cpus (NR_CPUS).

The current kernel has generic percpu-counter stuff.  using it is right
way.  it makes code simplify and percpu_counter_read_positive() don't
make underflow issue.

Reported-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>		[All kernel versions]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/meminfo.c    |  2 +-
 include/linux/mman.h |  9 +++------
 mm/mmap.c            | 12 ++++++------
 mm/nommu.c           | 13 +++++++------
 mm/swap.c            | 46 --------------------------------------------
 5 files changed, 17 insertions(+), 65 deletions(-)

diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index 74ea974f5ca..c6b0302af4c 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -35,7 +35,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
 #define K(x) ((x) << (PAGE_SHIFT - 10))
 	si_meminfo(&i);
 	si_swapinfo(&i);
-	committed = atomic_long_read(&vm_committed_space);
+	committed = percpu_counter_read_positive(&vm_committed_as);
 	allowed = ((totalram_pages - hugetlb_total_pages())
 		* sysctl_overcommit_ratio / 100) + total_swap_pages;
 
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 30d1073bac3..9872d6ca58a 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -12,21 +12,18 @@
 
 #ifdef __KERNEL__
 #include <linux/mm.h>
+#include <linux/percpu_counter.h>
 
 #include <asm/atomic.h>
 
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
-extern atomic_long_t vm_committed_space;
+extern struct percpu_counter vm_committed_as;
 
-#ifdef CONFIG_SMP
-extern void vm_acct_memory(long pages);
-#else
 static inline void vm_acct_memory(long pages)
 {
-	atomic_long_add(pages, &vm_committed_space);
+	percpu_counter_add(&vm_committed_as, pages);
 }
-#endif
 
 static inline void vm_unacct_memory(long pages)
 {
diff --git a/mm/mmap.c b/mm/mmap.c
index 3303d1ba8e8..6b7b1a95944 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -85,7 +85,7 @@ EXPORT_SYMBOL(vm_get_page_prot);
 int sysctl_overcommit_memory = OVERCOMMIT_GUESS;  /* heuristic overcommit */
 int sysctl_overcommit_ratio = 50;	/* default is 50% */
 int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
 
 /*
  * Check that a process has enough memory to allocate a new virtual
@@ -179,11 +179,7 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 	if (mm)
 		allowed -= mm->total_vm / 32;
 
-	/*
-	 * cast `allowed' as a signed long because vm_committed_space
-	 * sometimes has a negative value
-	 */
-	if (atomic_long_read(&vm_committed_space) < (long)allowed)
+	if (percpu_counter_read_positive(&vm_committed_as) < allowed)
 		return 0;
 error:
 	vm_unacct_memory(pages);
@@ -2481,4 +2477,8 @@ void mm_drop_all_locks(struct mm_struct *mm)
  */
 void __init mmap_init(void)
 {
+	int ret;
+
+	ret = percpu_counter_init(&vm_committed_as, 0);
+	VM_BUG_ON(ret);
 }
diff --git a/mm/nommu.c b/mm/nommu.c
index 72eda4aee2c..809998aa7b5 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -62,7 +62,7 @@ void *high_memory;
 struct page *mem_map;
 unsigned long max_mapnr;
 unsigned long num_physpages;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
 int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
 int sysctl_overcommit_ratio = 50; /* default is 50% */
 int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
@@ -463,6 +463,10 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
  */
 void __init mmap_init(void)
 {
+	int ret;
+
+	ret = percpu_counter_init(&vm_committed_as, 0);
+	VM_BUG_ON(ret);
 	vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC);
 }
 
@@ -1847,12 +1851,9 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 	if (mm)
 		allowed -= mm->total_vm / 32;
 
-	/*
-	 * cast `allowed' as a signed long because vm_committed_space
-	 * sometimes has a negative value
-	 */
-	if (atomic_long_read(&vm_committed_space) < (long)allowed)
+	if (percpu_counter_read_positive(&vm_committed_as) < allowed)
 		return 0;
+
 error:
 	vm_unacct_memory(pages);
 
diff --git a/mm/swap.c b/mm/swap.c
index bede23ce64e..cb29ae5d33a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -491,49 +491,6 @@ unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping,
 
 EXPORT_SYMBOL(pagevec_lookup_tag);
 
-#ifdef CONFIG_SMP
-/*
- * We tolerate a little inaccuracy to avoid ping-ponging the counter between
- * CPUs
- */
-#define ACCT_THRESHOLD	max(16, NR_CPUS * 2)
-
-static DEFINE_PER_CPU(long, committed_space);
-
-void vm_acct_memory(long pages)
-{
-	long *local;
-
-	preempt_disable();
-	local = &__get_cpu_var(committed_space);
-	*local += pages;
-	if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
-		atomic_long_add(*local, &vm_committed_space);
-		*local = 0;
-	}
-	preempt_enable();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Drop the CPU's cached committed space back into the central pool. */
-static int cpu_swap_callback(struct notifier_block *nfb,
-			     unsigned long action,
-			     void *hcpu)
-{
-	long *committed;
-
-	committed = &per_cpu(committed_space, (long)hcpu);
-	if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
-		atomic_long_add(*committed, &vm_committed_space);
-		*committed = 0;
-		drain_cpu_pagevecs((long)hcpu);
-	}
-	return NOTIFY_OK;
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-#endif /* CONFIG_SMP */
-
 /*
  * Perform any setup for the swap system
  */
@@ -554,7 +511,4 @@ void __init swap_setup(void)
 	 * Right now other parts of the system means that we
 	 * _really_ don't want to cluster much more
 	 */
-#ifdef CONFIG_HOTPLUG_CPU
-	hotcpu_notifier(cpu_swap_callback, 0);
-#endif
 }
-- 
GitLab


From 52dc5aec9fe2eb591f1490278ae767448860118b Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 30 Apr 2009 15:08:53 -0700
Subject: [PATCH 1103/1421] kernel-doc: restrict syntax for private: and
 public:

scripts/kernel-doc can (incorrectly) delete struct members that are
surrounded by /* ...  */ <struct members> /* ...  */ if there is a /*
private: */ comment in there somewhere also.

Fix that by making the "/* private:" only allow whitespace between /* and
"private:", not anything/everything in the world.

This fixes some erroneous kernel-doc warnings that popped up while
processing include/linux/usb/composite.h.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-doc-nano-HOWTO.txt | 7 +++++--
 scripts/kernel-doc                      | 7 ++++---
 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 026ec7d5738..4d04572b654 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
 
 Inside a struct description, you can use the "private:" and "public:"
 comment tags.  Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation.  The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker.  They may optionally include comments between the ":" and the
+ending "*/" marker.
 
 Example:
 
@@ -283,7 +286,7 @@ Example:
 struct my_struct {
     int a;
     int b;
-/* private: */
+/* private: internal use only */
     int c;
 };
 
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 0f11870116d..3208a3a7e7f 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1411,7 +1411,8 @@ sub dump_struct($$) {
     my $file = shift;
     my $nested;
 
-    if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) {
+    if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) {
+	#my $decl_type = $1;
 	$declaration_name = $2;
 	my $members = $3;
 
@@ -1420,8 +1421,8 @@ sub dump_struct($$) {
 	$nested = $1;
 
 	# ignore members marked private:
-	$members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
-	$members =~ s/\/\*.*?private:.*//gos;
+	$members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos;
+	$members =~ s/\/\*\s*private:.*//gos;
 	# strip comments:
 	$members =~ s/\/\*.*?\*\///gos;
 	$nested =~ s/\/\*.*?\*\///gos;
-- 
GitLab


From 0ae05fb254a5f2617fc8fcfff7be959b54a5e963 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Thu, 30 Apr 2009 15:08:54 -0700
Subject: [PATCH 1104/1421] ptrace: s/parent/real_parent/ in binfmt_elf_fdpic.c

->real_parent is the parent. ->parent may be the tracer.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_elf_fdpic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 70cfc4b84ae..fdb66faa24f 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1388,7 +1388,7 @@ static void fill_prstatus(struct elf_prstatus *prstatus,
 	prstatus->pr_sigpend = p->pending.signal.sig[0];
 	prstatus->pr_sighold = p->blocked.sig[0];
 	prstatus->pr_pid = task_pid_vnr(p);
-	prstatus->pr_ppid = task_pid_vnr(p->parent);
+	prstatus->pr_ppid = task_pid_vnr(p->real_parent);
 	prstatus->pr_pgrp = task_pgrp_vnr(p);
 	prstatus->pr_sid = task_session_vnr(p);
 	if (thread_group_leader(p)) {
@@ -1433,7 +1433,7 @@ static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
 	psinfo->pr_psargs[len] = 0;
 
 	psinfo->pr_pid = task_pid_vnr(p);
-	psinfo->pr_ppid = task_pid_vnr(p->parent);
+	psinfo->pr_ppid = task_pid_vnr(p->real_parent);
 	psinfo->pr_pgrp = task_pgrp_vnr(p);
 	psinfo->pr_sid = task_session_vnr(p);
 
-- 
GitLab


From 8713e01295140f674a41f2199b0f7ca99dfb69d5 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 30 Apr 2009 15:08:55 -0700
Subject: [PATCH 1105/1421] vmscan: avoid multiplication overflow in
 shrink_zone()

Local variable `scan' can overflow on zones which are larger than

	(2G * 4k) / 100 = 80GB.

Making it 64-bit on 64-bit will fix that up.

Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmscan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index eac9577941f..5fa3eda1f03 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1471,7 +1471,7 @@ static void shrink_zone(int priority, struct zone *zone,
 
 	for_each_evictable_lru(l) {
 		int file = is_file_lru(l);
-		int scan;
+		unsigned long scan;
 
 		scan = zone_nr_pages(zone, sc, l);
 		if (priority) {
-- 
GitLab


From 9e4a5bda89034502fb144331e71a0efdfd5fae97 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Thu, 30 Apr 2009 15:08:57 -0700
Subject: [PATCH 1106/1421] mm: prevent divide error for small values of
 vm_dirty_bytes

Avoid setting less than two pages for vm_dirty_bytes: this is necessary to
avoid potential division by 0 (like the following) in get_dirty_limits().

[   49.951610] divide error: 0000 [#1] PREEMPT SMP
[   49.952195] last sysfs file: /sys/devices/pci0000:00/0000:00:01.1/host0/target0:0:0/0:0:0:0/block/sda/uevent
[   49.952195] CPU 1
[   49.952195] Modules linked in: pcspkr
[   49.952195] Pid: 3064, comm: dd Not tainted 2.6.30-rc3 #1
[   49.952195] RIP: 0010:[<ffffffff802d39a9>]  [<ffffffff802d39a9>] get_dirty_limits+0xe9/0x2c0
[   49.952195] RSP: 0018:ffff88001de03a98  EFLAGS: 00010202
[   49.952195] RAX: 00000000000000c0 RBX: ffff88001de03b80 RCX: 28f5c28f5c28f5c3
[   49.952195] RDX: 0000000000000000 RSI: 00000000000000c0 RDI: 0000000000000000
[   49.952195] RBP: ffff88001de03ae8 R08: 0000000000000000 R09: 0000000000000000
[   49.952195] R10: ffff88001ddda9a0 R11: 0000000000000001 R12: 0000000000000001
[   49.952195] R13: ffff88001fbc8218 R14: ffff88001de03b70 R15: ffff88001de03b78
[   49.952195] FS:  00007fe9a435b6f0(0000) GS:ffff8800025d9000(0000) knlGS:0000000000000000
[   49.952195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   49.952195] CR2: 00007fe9a39ab000 CR3: 000000001de38000 CR4: 00000000000006e0
[   49.952195] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   49.952195] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   49.952195] Process dd (pid: 3064, threadinfo ffff88001de02000, task ffff88001ddda250)
[   49.952195] Stack:
[   49.952195]  ffff88001fa0de00 ffff88001f2dbd70 ffff88001f9fe800 000080b900000000
[   49.952195]  00000000000000c0 ffff8800027a6100 0000000000000400 ffff88001fbc8218
[   49.952195]  0000000000000000 0000000000000600 ffff88001de03bb8 ffffffff802d3ed7
[   49.952195] Call Trace:
[   49.952195]  [<ffffffff802d3ed7>] balance_dirty_pages_ratelimited_nr+0x1d7/0x3f0
[   49.952195]  [<ffffffff80368f8e>] ? ext3_writeback_write_end+0x9e/0x120
[   49.952195]  [<ffffffff802cc7df>] generic_file_buffered_write+0x12f/0x330
[   49.952195]  [<ffffffff802cce8d>] __generic_file_aio_write_nolock+0x26d/0x460
[   49.952195]  [<ffffffff802cda32>] ? generic_file_aio_write+0x52/0xd0
[   49.952195]  [<ffffffff802cda49>] generic_file_aio_write+0x69/0xd0
[   49.952195]  [<ffffffff80365fa6>] ext3_file_write+0x26/0xc0
[   49.952195]  [<ffffffff803034d1>] do_sync_write+0xf1/0x140
[   49.952195]  [<ffffffff80290d1a>] ? get_lock_stats+0x2a/0x60
[   49.952195]  [<ffffffff80280730>] ? autoremove_wake_function+0x0/0x40
[   49.952195]  [<ffffffff8030411b>] vfs_write+0xcb/0x190
[   49.952195]  [<ffffffff803042d0>] sys_write+0x50/0x90
[   49.952195]  [<ffffffff8022ff6b>] system_call_fastpath+0x16/0x1b
[   49.952195] Code: 00 00 00 2b 05 09 1c 17 01 48 89 c6 49 0f af f4 48 c1 ee 02 48 89 f0 48 f7 e1 48 89 d6 31 d2 48 c1 ee 02 48 0f af 75 d0 48 89 f0 <48> f7 f7 41 8b 95 ac 01 00 00 48 89 c7 49 0f af d4 48 c1 ea 02
[   49.952195] RIP  [<ffffffff802d39a9>] get_dirty_limits+0xe9/0x2c0
[   49.952195]  RSP <ffff88001de03a98>
[   50.096523] ---[ end trace 008d7aa02f244d7b ]---

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/sysctl/vm.txt | 4 ++++
 kernel/sysctl.c             | 5 ++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 97c4b328432..b716d33912d 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -90,6 +90,10 @@ will itself start writeback.
 If dirty_bytes is written, dirty_ratio becomes a function of its value
 (dirty_bytes / the amount of dirtyable system memory).
 
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
 ==============================================================
 
 dirty_expire_centisecs
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index e3d2c7dd59b..ea78fa101ad 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -103,6 +103,9 @@ static unsigned long one_ul = 1;
 static int one_hundred = 100;
 static int one_thousand = 1000;
 
+/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
+
 /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
 static int maxolduid = 65535;
 static int minolduid;
@@ -1006,7 +1009,7 @@ static struct ctl_table vm_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &dirty_bytes_handler,
 		.strategy	= &sysctl_intvec,
-		.extra1		= &one_ul,
+		.extra1		= &dirty_bytes_min,
 	},
 	{
 		.procname	= "dirty_writeback_centisecs",
-- 
GitLab


From 65fd21058a791f35aff11eeccd2e270f0faf11ec Mon Sep 17 00:00:00 2001
From: Ashutosh Naik <ashutosh.naik@gmail.com>
Date: Thu, 30 Apr 2009 15:08:58 -0700
Subject: [PATCH 1107/1421] ibft: fix the display of a few fields in the NIC
 attribute structure in sysfs

Fix the display of a few fields in the iBFT NIC attribute structure in
sysfs.

Ensure that, if the DHCP IP address and the subnet mask for the interface
is present in the iBFT NIC structure, the corresponding entries are
created in sysfs tree for the device.  This would hence create the
additional entries in the tree based on the iBFT table and would not
delete any existing entries.

Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Cc: Vishnu V <vishnu@chelsio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/firmware/iscsi_ibft.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 7b7ddc2d51c..420a96e7f2d 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -754,11 +754,11 @@ static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry)
 		rc = 1;
 		break;
 	case ibft_eth_ip_addr:
-		if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+		if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
 			rc = 1;
 		break;
 	case ibft_eth_subnet_mask:
-		if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+		if (nic->subnet_mask_prefix)
 			rc = 1;
 		break;
 	case ibft_eth_origin:
-- 
GitLab


From f75e6745aa3084124ae1434fd7629853bdaf6798 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Tue, 21 Apr 2009 17:18:20 -0400
Subject: [PATCH 1108/1421] SUNRPC: Fix the problem of EADDRNOTAVAIL syslog
 floods on reconnect

See http://bugzilla.kernel.org/show_bug.cgi?id=13034

If the port gets into a TIME_WAIT state, then we cannot reconnect without
binding to a new port.

Tested-by: Petr Vandrovec <petr@vandrovec.name>
Tested-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sunrpc/xprt.h |  1 +
 net/sunrpc/xprt.c           |  6 ++----
 net/sunrpc/xprtsock.c       | 26 +++++++++++++++++++++-----
 3 files changed, 24 insertions(+), 9 deletions(-)

diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 1758d9f5b5c..08afe43118f 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -261,6 +261,7 @@ void			xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie);
 #define XPRT_BINDING		(5)
 #define XPRT_CLOSING		(6)
 #define XPRT_CONNECTION_ABORT	(7)
+#define XPRT_CONNECTION_CLOSE	(8)
 
 static inline void xprt_set_connected(struct rpc_xprt *xprt)
 {
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index a0bfe53f162..06ca058572f 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -672,10 +672,8 @@ xprt_init_autodisconnect(unsigned long data)
 	if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
 		goto out_abort;
 	spin_unlock(&xprt->transport_lock);
-	if (xprt_connecting(xprt))
-		xprt_release_write(xprt, NULL);
-	else
-		queue_work(rpciod_workqueue, &xprt->task_cleanup);
+	set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+	queue_work(rpciod_workqueue, &xprt->task_cleanup);
 	return;
 out_abort:
 	spin_unlock(&xprt->transport_lock);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d40ff50887a..e1859614601 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -807,6 +807,9 @@ static void xs_reset_transport(struct sock_xprt *transport)
  *
  * This is used when all requests are complete; ie, no DRC state remains
  * on the server we want to save.
+ *
+ * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with
+ * xs_reset_transport() zeroing the socket from underneath a writer.
  */
 static void xs_close(struct rpc_xprt *xprt)
 {
@@ -824,6 +827,14 @@ static void xs_close(struct rpc_xprt *xprt)
 	xprt_disconnect_done(xprt);
 }
 
+static void xs_tcp_close(struct rpc_xprt *xprt)
+{
+	if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state))
+		xs_close(xprt);
+	else
+		xs_tcp_shutdown(xprt);
+}
+
 /**
  * xs_destroy - prepare to shutdown a transport
  * @xprt: doomed transport
@@ -1772,6 +1783,15 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt,
 			xprt, -status, xprt_connected(xprt),
 			sock->sk->sk_state);
 	switch (status) {
+	default:
+		printk("%s: connect returned unhandled error %d\n",
+			__func__, status);
+	case -EADDRNOTAVAIL:
+		/* We're probably in TIME_WAIT. Get rid of existing socket,
+		 * and retry
+		 */
+		set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+		xprt_force_disconnect(xprt);
 	case -ECONNREFUSED:
 	case -ECONNRESET:
 	case -ENETUNREACH:
@@ -1782,10 +1802,6 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt,
 		xprt_clear_connecting(xprt);
 		return;
 	}
-	/* get rid of existing socket, and retry */
-	xs_tcp_shutdown(xprt);
-	printk("%s: connect returned unhandled error %d\n",
-			__func__, status);
 out_eagain:
 	status = -EAGAIN;
 out:
@@ -1994,7 +2010,7 @@ static struct rpc_xprt_ops xs_tcp_ops = {
 	.buf_free		= rpc_free,
 	.send_request		= xs_tcp_send_request,
 	.set_retrans_timeout	= xprt_set_retrans_timeout_def,
-	.close			= xs_tcp_shutdown,
+	.close			= xs_tcp_close,
 	.destroy		= xs_destroy,
 	.print_stats		= xs_tcp_print_stats,
 };
-- 
GitLab


From 9fffb55f66127b52c937ede5196ebfa0c0d50bce Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Thu, 30 Apr 2009 15:25:53 +1000
Subject: [PATCH 1109/1421] Move dtc and libfdt sources from arch/powerpc/boot
 to scripts/dtc

The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/Kconfig                          |  4 ++
 arch/powerpc/boot/Makefile                    | 67 +++++++------------
 arch/powerpc/boot/simpleboot.c                |  2 +-
 scripts/Makefile                              |  1 +
 scripts/dtc/Makefile                          | 54 +++++++++++++++
 .../boot/dtc-src => scripts/dtc}/Makefile.dtc |  0
 .../boot/dtc-src => scripts/dtc}/checks.c     |  0
 .../boot/dtc-src => scripts/dtc}/data.c       |  0
 .../boot/dtc-src => scripts/dtc}/dtc-lexer.l  |  0
 .../dtc}/dtc-lexer.lex.c_shipped              |  0
 .../dtc}/dtc-parser.tab.c_shipped             |  0
 .../dtc}/dtc-parser.tab.h_shipped             |  0
 .../boot/dtc-src => scripts/dtc}/dtc-parser.y |  0
 .../boot/dtc-src => scripts/dtc}/dtc.c        |  0
 .../boot/dtc-src => scripts/dtc}/dtc.h        |  0
 .../boot/dtc-src => scripts/dtc}/flattree.c   |  0
 .../boot/dtc-src => scripts/dtc}/fstree.c     |  0
 .../dtc}/libfdt/Makefile.libfdt               |  0
 .../powerpc/boot => scripts/dtc}/libfdt/fdt.c |  0
 .../powerpc/boot => scripts/dtc}/libfdt/fdt.h |  0
 .../boot => scripts/dtc}/libfdt/fdt_ro.c      |  0
 .../boot => scripts/dtc}/libfdt/fdt_rw.c      |  0
 .../dtc}/libfdt/fdt_strerror.c                |  0
 .../boot => scripts/dtc}/libfdt/fdt_sw.c      |  0
 .../boot => scripts/dtc}/libfdt/fdt_wip.c     |  0
 .../boot => scripts/dtc}/libfdt/libfdt.h      |  0
 .../dtc/libfdt}/libfdt_env.h                  |  0
 .../dtc}/libfdt/libfdt_internal.h             |  0
 .../boot/dtc-src => scripts/dtc}/livetree.c   |  0
 .../boot/dtc-src => scripts/dtc}/srcpos.c     |  0
 .../boot/dtc-src => scripts/dtc}/srcpos.h     |  0
 .../boot/dtc-src => scripts/dtc}/treesource.c |  0
 .../dtc-src => scripts/dtc}/version_gen.h     |  0
 33 files changed, 83 insertions(+), 45 deletions(-)
 create mode 100644 scripts/dtc/Makefile
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/Makefile.dtc (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/checks.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/data.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc-lexer.l (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc-lexer.lex.c_shipped (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc-parser.tab.c_shipped (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc-parser.tab.h_shipped (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc-parser.y (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/dtc.h (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/flattree.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/fstree.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/Makefile.libfdt (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt.h (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt_ro.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt_rw.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt_strerror.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt_sw.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/fdt_wip.c (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/libfdt.h (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc/libfdt}/libfdt_env.h (100%)
 rename {arch/powerpc/boot => scripts/dtc}/libfdt/libfdt_internal.h (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/livetree.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/srcpos.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/srcpos.h (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/treesource.c (100%)
 rename {arch/powerpc/boot/dtc-src => scripts/dtc}/version_gen.h (100%)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c780455136..a0d1146a057 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION
 	default y if PMAC_APM_EMU
 	bool
 
+config DTC
+       bool
+       default y
+
 config DEFAULT_UIMAGE
 	bool
 	help
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4458abb67c5..8da2bf963b5 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y)
 BOOTCFLAGS	+= -fno-stack-protector
 endif
 
-BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
+BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
 
 DTS_FLAGS	?= -p 1024
 
@@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h
 $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
-src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+	$(addprefix $(obj)/,$(libfdtheader))
+
 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
-		$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
+		$(libfdt) libfdt-wrapper.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
 		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
@@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
 $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
 	$(call cmd,copy_zliblinuxheader)
 
+quiet_cmd_copy_libfdt = COPY    $@
+      cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+	$(call cmd,copy_libfdt)
+
 $(obj)/empty.c:
 	@touch $@
 
@@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct
 	@cp $< $@
 
 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+		$(libfdt) $(libfdtheader) \
 		empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
 
 quiet_cmd_bootcc = BOOTCC  $@
@@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS  $@
 quiet_cmd_bootar = BOOTAR  $@
       cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+	$(call if_changed_dep,bootcc)
 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,bootcc)
@@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree dtc
+hostprogs-y	:= addnote addRamDisk hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -133,46 +147,9 @@ extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
 dtstree		:= $(srctree)/$(src)/dts
 
 wrapper		:=$(srctree)/$(src)/wrapper
-wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
+wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
 			$(wrapper) FORCE
 
-#############
-# Bits for building dtc
-# DTC_GENPARSER      := 1    # Uncomment to rebuild flex/bison output
-
-dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
-dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
-dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
-
-# prerequisites on generated files needs to be explicit
-$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
-$(obj)/dtc-src/dtc-lexer.lex.o:  $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
-
-HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
-
-targets += dtc-src/dtc-parser.tab.c
-targets += dtc-src/dtc-lexer.lex.c
-
-clean-files += dtc-src/dtc-parser.tab.h
-
-ifdef DTC_GENPARSER
-BISON = bison
-FLEX = flex
-
-quiet_cmd_bison = BISON   $@
-      cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
-quiet_cmd_flex = FLEX    $@
-      cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
-
-$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
-	$(call if_changed,bison)
-
-$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
-
-$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
-	$(call if_changed,flex)
-endif
-
 #############
 # Bits for building various flavours of zImage
 
@@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
 
 # Rule to build device tree blobs
-$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
-	$(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+DTC = $(objtree)/scripts/dtc/dtc
+
+$(obj)/%.dtb: $(dtstree)/%.dts
+	$(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
 
 # If there isn't a platform selected then just strip the vmlinux.
 ifeq (,$(image-y))
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
index c58a0dada99..21cd48074ec 100644
--- a/arch/powerpc/boot/simpleboot.c
+++ b/arch/powerpc/boot/simpleboot.c
@@ -19,7 +19,7 @@
 #include "types.h"
 #include "io.h"
 #include "stdio.h"
-#include "libfdt/libfdt.h"
+#include <libfdt.h>
 
 BSS_STACK(4*1024);
 
diff --git a/scripts/Makefile b/scripts/Makefile
index aafdf064fee..9dd5b25a1d5 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -21,6 +21,7 @@ hostprogs-y += unifdef
 subdir-$(CONFIG_MODVERSIONS) += genksyms
 subdir-y                     += mod
 subdir-$(CONFIG_SECURITY_SELINUX) += selinux
+subdir-$(CONFIG_DTC)         += dtc
 
 # Let clean descend into subdirs
 subdir-	+= basic kconfig package selinux
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
new file mode 100644
index 00000000000..01cdb36fc58
--- /dev/null
+++ b/scripts/dtc/Makefile
@@ -0,0 +1,54 @@
+# scripts/dtc makefile
+
+hostprogs-y	:= dtc
+always		:= $(hostprogs-y)
+
+dtc-objs	:= dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
+		   srcpos.o checks.o
+dtc-objs	+= dtc-lexer.lex.o dtc-parser.tab.o
+
+# Source files need to get at the userspace version of libfdt_env.h to compile
+
+HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt
+
+HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+
+HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
+
+# dependencies on generated files need to be listed explicitly
+$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h
+$(obj)/dtc-lexer.lex.o:  $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h
+
+targets += dtc-parser.tab.c dtc-lexer.lex.c
+
+clean-files += dtc-parser.tab.h
+
+# GENERATE_PARSER := 1		# Uncomment to rebuild flex/bison output
+
+ifdef GENERATE_PARSER
+
+BISON = bison
+FLEX = flex
+
+quiet_cmd_bison = BISON   $@
+      cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
+quiet_cmd_flex = FLEX    $@
+      cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
+
+$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE
+        $(call if_changed,bison)
+
+$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c
+
+$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE
+        $(call if_changed,flex)
+
+endif
diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/scripts/dtc/Makefile.dtc
similarity index 100%
rename from arch/powerpc/boot/dtc-src/Makefile.dtc
rename to scripts/dtc/Makefile.dtc
diff --git a/arch/powerpc/boot/dtc-src/checks.c b/scripts/dtc/checks.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/checks.c
rename to scripts/dtc/checks.c
diff --git a/arch/powerpc/boot/dtc-src/data.c b/scripts/dtc/data.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/data.c
rename to scripts/dtc/data.c
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/scripts/dtc/dtc-lexer.l
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc-lexer.l
rename to scripts/dtc/dtc-lexer.l
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
rename to scripts/dtc/dtc-lexer.lex.c_shipped
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
rename to scripts/dtc/dtc-parser.tab.c_shipped
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
rename to scripts/dtc/dtc-parser.tab.h_shipped
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/scripts/dtc/dtc-parser.y
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc-parser.y
rename to scripts/dtc/dtc-parser.y
diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/scripts/dtc/dtc.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc.c
rename to scripts/dtc/dtc.c
diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/scripts/dtc/dtc.h
similarity index 100%
rename from arch/powerpc/boot/dtc-src/dtc.h
rename to scripts/dtc/dtc.h
diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/scripts/dtc/flattree.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/flattree.c
rename to scripts/dtc/flattree.c
diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/scripts/dtc/fstree.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/fstree.c
rename to scripts/dtc/fstree.c
diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/scripts/dtc/libfdt/Makefile.libfdt
similarity index 100%
rename from arch/powerpc/boot/libfdt/Makefile.libfdt
rename to scripts/dtc/libfdt/Makefile.libfdt
diff --git a/arch/powerpc/boot/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt.c
rename to scripts/dtc/libfdt/fdt.c
diff --git a/arch/powerpc/boot/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt.h
rename to scripts/dtc/libfdt/fdt.h
diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt_ro.c
rename to scripts/dtc/libfdt/fdt_ro.c
diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt_rw.c
rename to scripts/dtc/libfdt/fdt_rw.c
diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/scripts/dtc/libfdt/fdt_strerror.c
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt_strerror.c
rename to scripts/dtc/libfdt/fdt_strerror.c
diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt_sw.c
rename to scripts/dtc/libfdt/fdt_sw.c
diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c
similarity index 100%
rename from arch/powerpc/boot/libfdt/fdt_wip.c
rename to scripts/dtc/libfdt/fdt_wip.c
diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h
similarity index 100%
rename from arch/powerpc/boot/libfdt/libfdt.h
rename to scripts/dtc/libfdt/libfdt.h
diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/scripts/dtc/libfdt/libfdt_env.h
similarity index 100%
rename from arch/powerpc/boot/dtc-src/libfdt_env.h
rename to scripts/dtc/libfdt/libfdt_env.h
diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h
similarity index 100%
rename from arch/powerpc/boot/libfdt/libfdt_internal.h
rename to scripts/dtc/libfdt/libfdt_internal.h
diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/scripts/dtc/livetree.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/livetree.c
rename to scripts/dtc/livetree.c
diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/scripts/dtc/srcpos.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/srcpos.c
rename to scripts/dtc/srcpos.c
diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/scripts/dtc/srcpos.h
similarity index 100%
rename from arch/powerpc/boot/dtc-src/srcpos.h
rename to scripts/dtc/srcpos.h
diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/scripts/dtc/treesource.c
similarity index 100%
rename from arch/powerpc/boot/dtc-src/treesource.c
rename to scripts/dtc/treesource.c
diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/scripts/dtc/version_gen.h
similarity index 100%
rename from arch/powerpc/boot/dtc-src/version_gen.h
rename to scripts/dtc/version_gen.h
-- 
GitLab


From 7fdf523067666b0eaff330f362401ee50ce187c4 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Fri, 24 Apr 2009 17:32:22 -0400
Subject: [PATCH 1110/1421] NFS: Close page_mkwrite() races

Follow up to Nick Piggin's patches to ensure that nfs_vm_page_mkwrite
returns with the page lock held, and sets the VM_FAULT_LOCKED flag.

See http://bugzilla.kernel.org/show_bug.cgi?id=12913

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfs/file.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 5a97bcfe03e..ec7e27d00bc 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -517,10 +517,10 @@ static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 	ret = nfs_updatepage(filp, page, 0, pagelen);
 out_unlock:
+	if (!ret)
+		return VM_FAULT_LOCKED;
 	unlock_page(page);
-	if (ret)
-		ret = VM_FAULT_SIGBUS;
-	return ret;
+	return VM_FAULT_SIGBUS;
 }
 
 static struct vm_operations_struct nfs_file_vm_ops = {
-- 
GitLab


From 283a5d250e5315b76e7bfd7498c581324c922bfe Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Sat, 2 May 2009 10:14:15 -0400
Subject: [PATCH 1111/1421] [ARM] Kconfig typo fix:  "PXA930" -> "CPU_PXA930".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e66d9099ea..17d3fbd368a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -289,12 +289,12 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
-- 
GitLab


From 21515e46bc6a6279dd13f6c01898ada9720100a3 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Wed, 29 Apr 2009 14:14:00 -0500
Subject: [PATCH 1112/1421] svcrdma: clean up error paths.

These fixes resolved crashes due to resource leak BUG_ON checks. The
resource leaks were detected by introducing asynchronous transport errors.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 net/sunrpc/xprtrdma/svc_rdma_sendto.c    | 3 +++
 net/sunrpc/xprtrdma/svc_rdma_transport.c | 3 ++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 6c26a675435..8b510c5e877 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -183,6 +183,7 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt,
 
  fatal_err:
 	printk("svcrdma: Error fast registering memory for xprt %p\n", xprt);
+	vec->frmr = NULL;
 	svc_rdma_put_frmr(xprt, frmr);
 	return -EIO;
 }
@@ -516,6 +517,7 @@ static int send_reply(struct svcxprt_rdma *rdma,
 		       "svcrdma: could not post a receive buffer, err=%d."
 		       "Closing transport %p.\n", ret, rdma);
 		set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+		svc_rdma_put_frmr(rdma, vec->frmr);
 		svc_rdma_put_context(ctxt, 0);
 		return -ENOTCONN;
 	}
@@ -606,6 +608,7 @@ static int send_reply(struct svcxprt_rdma *rdma,
 	return 0;
 
  err:
+	svc_rdma_unmap_dma(ctxt);
 	svc_rdma_put_frmr(rdma, vec->frmr);
 	svc_rdma_put_context(ctxt, 1);
 	return -EIO;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 3d810e7df3f..4b0c2fa15e0 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -520,8 +520,9 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt)
 	svc_xprt_get(&xprt->sc_xprt);
 	ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
 	if (ret) {
-		svc_xprt_put(&xprt->sc_xprt);
+		svc_rdma_unmap_dma(ctxt);
 		svc_rdma_put_context(ctxt, 1);
+		svc_xprt_put(&xprt->sc_xprt);
 	}
 	return ret;
 
-- 
GitLab


From ccecee1e5e42981f5eb37f4411e8552b9db04d30 Mon Sep 17 00:00:00 2001
From: Andy Adamson <andros@netapp.com>
Date: Fri, 1 May 2009 11:33:53 -0400
Subject: [PATCH 1113/1421] nfsd41: slots are freed with session

The session and slots are allocated all in one piece.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 fs/nfsd/nfs4state.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index c65a27b76a9..3b711f5147a 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -580,7 +580,6 @@ free_session(struct kref *kref)
 		struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry;
 		nfsd4_release_respages(e->ce_respages, e->ce_resused);
 	}
-	kfree(ses->se_slots);
 	kfree(ses);
 }
 
-- 
GitLab


From 548d2de9bd978a4d4e941477500f1ab97aade137 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <pierre@ossman.eu>
Date: Fri, 10 Apr 2009 17:52:57 +0200
Subject: [PATCH 1114/1421] mmc_block: be prepared for oversized requests

The block layer does not support very low sector count restrictions
so we need to be prepared to handle bigger requests than we can send
directly to the controller.

Problem found by Manuel Lauss.

Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/card/block.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index fe8041e619e..b25e9b6516a 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -253,6 +253,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
 		brq.data.blocks = req->nr_sectors;
 
+		/*
+		 * The block layer doesn't support all sector count
+		 * restrictions, so we need to be prepared for too big
+		 * requests.
+		 */
+		if (brq.data.blocks > card->host->max_blk_count)
+			brq.data.blocks = card->host->max_blk_count;
+
 		/*
 		 * After a read error, we redo the request one sector at a time
 		 * in order to accurately determine which sectors can be read
-- 
GitLab


From c60a32cd129b1c41f98888b03ba2904406bac8f8 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Fri, 10 Apr 2009 23:31:10 +0200
Subject: [PATCH 1115/1421] sdhci-pci: bad error handling in probe function

The goto unmap is too early, we haven't allocated host or done the
request_region().

Found by smatch (http://repo.or.cz/w/smatch.git).

[ Second error path fix by Pierre Ossman ]

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/host/sdhci-pci.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index cd37962ec44..65be27995d5 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -522,8 +522,8 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 
 	host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
 	if (IS_ERR(host)) {
-		ret = PTR_ERR(host);
-		goto unmap;
+		dev_err(&pdev->dev, "cannot allocate host\n");
+		return ERR_PTR(PTR_ERR(host));
 	}
 
 	slot = sdhci_priv(host);
@@ -541,7 +541,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 	ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
 	if (ret) {
 		dev_err(&pdev->dev, "cannot request region\n");
-		return ERR_PTR(ret);
+		goto free;
 	}
 
 	addr = pci_resource_start(pdev, bar);
@@ -572,6 +572,8 @@ unmap:
 
 release:
 	pci_release_region(pdev, bar);
+
+free:
 	sdhci_free_host(host);
 
 	return ERR_PTR(ret);
-- 
GitLab


From 79bccc5aefb4e64e651abe04f78c3e6bf8acd6f0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jos=C3=A9=20M=2E=20Fern=C3=A1ndez?= <josemariafg@gmail.com>
Date: Tue, 10 Mar 2009 02:21:21 +0100
Subject: [PATCH 1116/1421] mmc: increase power up delay
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The TI controller on Toshiba Tecra M5 needs more time to power up or
the cards will init incorrectly or not at all.

Signed-off-by: José M. Fernández <josemariafg@gmail.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/core/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index fa073ab3fa3..26491173275 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -706,7 +706,7 @@ static void mmc_power_up(struct mmc_host *host)
 	 * This delay should be sufficient to allow the power supply
 	 * to reach the minimum voltage.
 	 */
-	mmc_delay(2);
+	mmc_delay(10);
 
 	host->ios.clock = host->f_min;
 	host->ios.power_mode = MMC_POWER_ON;
@@ -716,7 +716,7 @@ static void mmc_power_up(struct mmc_host *host)
 	 * This delay must be at least 74 clock sizes, or 1 ms, or the
 	 * time required to reach a stable voltage.
 	 */
-	mmc_delay(2);
+	mmc_delay(10);
 }
 
 static void mmc_power_off(struct mmc_host *host)
-- 
GitLab


From 4accfe2577fab83e41db02282570e849f24ddf53 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <pierre@ossman.eu>
Date: Fri, 10 Apr 2009 23:55:42 +0200
Subject: [PATCH 1117/1421] sdhci: catch ADMA errors

We forgot to add the ADMA error bit to the list of data interrupts.

Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/host/sdhci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index f20a834f430..65c6f996bbd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -125,7 +125,7 @@
 #define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
 		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
 		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
-		SDHCI_INT_DATA_END_BIT)
+		SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR)
 #define SDHCI_INT_ALL_MASK	((unsigned int)-1)
 
 #define SDHCI_ACMD12_ERR	0x3C
-- 
GitLab


From 4ea580f1db62c5419e6690878fd61a740f3aae8e Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Fri, 17 Apr 2009 08:44:19 +0530
Subject: [PATCH 1118/1421] mmci: fix crash with debug enabled

If MMC debugging is enabled, the mmci driver oopses because the DBG
macro uses host->mmc before it is set.  Set it earlier.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/host/mmci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a663429b3d5..36875dcfa49 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -514,6 +514,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id)
 	}
 
 	host = mmc_priv(mmc);
+	host->mmc = mmc;
 	/* Bits 12 thru 19 is the designer */
 	host->hw_designer = (dev->periphid >> 12) & 0xff;
 	/* Bits 20 thru 23 is the revison */
@@ -545,7 +546,6 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id)
 		host->mclk = clk_get_rate(host->clk);
 		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
 	}
-	host->mmc = mmc;
 	host->base = ioremap(dev->res.start, SZ_4K);
 	if (!host->base) {
 		ret = -ENOMEM;
-- 
GitLab


From 2e058a6fb004a6b6c3eb6a219ae408f83b670598 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Tue, 21 Apr 2009 00:14:54 +0530
Subject: [PATCH 1119/1421] mvsdio: fix CONFIG_PM=y build

Fix usage of obsolete parameters and functions in the driver's PM
callbacks.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
---
 drivers/mmc/host/mvsdio.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index b5c375d94ab..c643d0fe118 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -825,24 +825,23 @@ static int __exit mvsd_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int mvsd_suspend(struct platform_device *dev, pm_message_t state,
-			   u32 level)
+static int mvsd_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct mmc_host *mmc = platform_get_drvdata(dev);
 	int ret = 0;
 
-	if (mmc && level == SUSPEND_DISABLE)
+	if (mmc)
 		ret = mmc_suspend_host(mmc, state);
 
 	return ret;
 }
 
-static int mvsd_resume(struct platform_device *dev, u32 level)
+static int mvsd_resume(struct platform_device *dev)
 {
-	struct mmc_host *mmc = platform_dev_get_drvdata(dev);
+	struct mmc_host *mmc = platform_get_drvdata(dev);
 	int ret = 0;
 
-	if (mmc && level == RESUME_ENABLE)
+	if (mmc)
 		ret = mmc_resume_host(mmc);
 
 	return ret;
-- 
GitLab


From d10db3a07e38bfb1bff92c790072d85b0bcc07eb Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 23 Apr 2009 16:27:39 +0200
Subject: [PATCH 1120/1421] i2c-pxa.c: timeouts off by 1

With `while (timeout--)' timeout reaches -1 after the loop, so the tests
below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-pxa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index c1405c8f6ba..acc7143d965 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -265,10 +265,10 @@ static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
 		show_state(i2c);
 	}
 
-	if (timeout <= 0)
+	if (timeout < 0)
 		show_state(i2c);
 
-	return timeout <= 0 ? I2C_RETRY : 0;
+	return timeout < 0 ? I2C_RETRY : 0;
 }
 
 static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
@@ -612,7 +612,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
 		show_state(i2c);
 	}
 
-	if (timeout <= 0) {
+	if (timeout < 0) {
 		show_state(i2c);
 		dev_err(&i2c->adap.dev,
 			"i2c_pxa: timeout waiting for bus free\n");
-- 
GitLab


From 0b3cc858003b79b6c66ad79415ead907cbe4074e Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Mon, 4 May 2009 08:37:12 +0000
Subject: [PATCH 1121/1421] [CIFS] NTLMSSP reenabled after move from connect.c
 to sess.c

The NTLMSSP code was removed from fs/cifs/connect.c and merged
(75% smaller, cleaner) into fs/cifs/sess.c

As with the old code it requires that cifs be built with
CONFIG_CIFS_EXPERIMENTAL, the /proc/fs/cifs/Experimental flag
must be set to 2, and mount must turn on extended security
(e.g. with sec=krb5).

Although NTLMSSP encapsulated in SPNEGO is not enabled yet,
"raw" ntlmssp is common and useful in some cases since it
offers more complete security negotiation, and is the
default way of negotiating security for many Windows systems.
SPNEGO encapsulated NTLMSSP will be able to reuse the same
code.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES |   3 +-
 fs/cifs/sess.c  | 252 +++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 251 insertions(+), 4 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 43f2e0d061f..f20c4069c22 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -8,7 +8,8 @@ accurately mark string length before allocating memory (which may help the
 rare cases where a UTF-8 string is much larger than the UCS2 string that
 we converted from).  Fix endianness of the vcnum field used during
 session setup to distinguish multiple mounts to same server from different
-userids.
+userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
+flag to be set to 2, and mount must enable krb5 to turn on extended security).
  
 Version 1.57
 ------------
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index b2bdc2a3383..e68744e169b 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -378,6 +378,186 @@ static int decode_ascii_ssetup(char **pbcc_area, int bleft,
 	return rc;
 }
 
+static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
+				    struct cifsSesInfo *ses)
+{
+	CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
+
+	if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
+		cERROR(1, ("challenge blob len %d too small", blob_len));
+		return -EINVAL;
+	}
+
+	if (memcmp(pblob->Signature, "NTLMSSP", 8)) {
+		cERROR(1, ("blob signature incorrect %s", pblob->Signature));
+		return -EINVAL;
+	}
+	if (pblob->MessageType != NtLmChallenge) {
+		cERROR(1, ("Incorrect message type %d", pblob->MessageType));
+		return -EINVAL;
+	}
+
+	memcpy(ses->server->cryptKey, pblob->Challenge, CIFS_CRYPTO_KEY_SIZE);
+	/* BB we could decode pblob->NegotiateFlags; some may be useful */
+	/* In particular we can examine sign flags */
+	/* BB spec says that if AvId field of MsvAvTimestamp is populated then
+		we must set the MIC field of the AUTHENTICATE_MESSAGE */
+
+	return 0;
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+/* BB Move to ntlmssp.c eventually */
+
+/* We do not malloc the blob, it is passed in pbuffer, because
+   it is fixed size, and small, making this approach cleaner */
+static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
+					 struct cifsSesInfo *ses)
+{
+	NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer;
+	__u32 flags;
+
+	memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+	sec_blob->MessageType = NtLmNegotiate;
+
+	/* BB is NTLMV2 session security format easier to use here? */
+	flags = NTLMSSP_NEGOTIATE_56 |	NTLMSSP_REQUEST_TARGET |
+		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+		NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+	if (ses->server->secMode &
+	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+		flags |= NTLMSSP_NEGOTIATE_SIGN;
+	if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+		flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+	sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+	sec_blob->WorkstationName.BufferOffset = 0;
+	sec_blob->WorkstationName.Length = 0;
+	sec_blob->WorkstationName.MaximumLength = 0;
+
+	/* Domain name is sent on the Challenge not Negotiate NTLMSSP request */
+	sec_blob->DomainName.BufferOffset = 0;
+	sec_blob->DomainName.Length = 0;
+	sec_blob->DomainName.MaximumLength = 0;
+}
+
+/* We do not malloc the blob, it is passed in pbuffer, because its
+   maximum possible size is fixed and small, making this approach cleaner.
+   This function returns the length of the data in the blob */
+static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
+				   struct cifsSesInfo *ses,
+				   const struct nls_table *nls_cp, int first)
+{
+	AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
+	__u32 flags;
+	unsigned char *tmp;
+	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
+
+	memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+	sec_blob->MessageType = NtLmAuthenticate;
+
+	flags = NTLMSSP_NEGOTIATE_56 |
+		NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
+		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+		NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+	if (ses->server->secMode &
+	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+		flags |= NTLMSSP_NEGOTIATE_SIGN;
+	if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+		flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+	tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
+	sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+	sec_blob->LmChallengeResponse.BufferOffset =
+				cpu_to_le32(sizeof(AUTHENTICATE_MESSAGE));
+	sec_blob->LmChallengeResponse.Length = 0;
+	sec_blob->LmChallengeResponse.MaximumLength = 0;
+
+	/* calculate session key,  BB what about adding similar ntlmv2 path? */
+	SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+	if (first)
+		cifs_calculate_mac_key(&ses->server->mac_signing_key,
+				       ntlm_session_key, ses->password);
+
+	memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+	sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+	sec_blob->NtChallengeResponse.MaximumLength =
+				cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+	tmp += CIFS_SESS_KEY_SIZE;
+
+	if (ses->domainName == NULL) {
+		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->DomainName.Length = 0;
+		sec_blob->DomainName.MaximumLength = 0;
+		tmp += 2;
+	} else {
+		int len;
+		len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
+				    MAX_USERNAME_SIZE, nls_cp);
+		len *= 2; /* unicode is 2 bytes each */
+		len += 2; /* trailing null */
+		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->DomainName.Length = cpu_to_le16(len);
+		sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
+		tmp += len;
+	}
+
+	if (ses->userName == NULL) {
+		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->UserName.Length = 0;
+		sec_blob->UserName.MaximumLength = 0;
+		tmp += 2;
+	} else {
+		int len;
+		len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+				    MAX_USERNAME_SIZE, nls_cp);
+		len *= 2; /* unicode is 2 bytes each */
+		len += 2; /* trailing null */
+		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->UserName.Length = cpu_to_le16(len);
+		sec_blob->UserName.MaximumLength = cpu_to_le16(len);
+		tmp += len;
+	}
+
+	sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->WorkstationName.Length = 0;
+	sec_blob->WorkstationName.MaximumLength = 0;
+	tmp += 2;
+
+	sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->SessionKey.Length = 0;
+	sec_blob->SessionKey.MaximumLength = 0;
+	return tmp - pbuffer;
+}
+
+
+static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
+				 struct cifsSesInfo *ses)
+{
+	build_ntlmssp_negotiate_blob(&pSMB->req.SecurityBlob[0], ses);
+	pSMB->req.SecurityBlobLength = cpu_to_le16(sizeof(NEGOTIATE_MESSAGE));
+
+	return;
+}
+
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
+				  struct cifsSesInfo *ses,
+				  const struct nls_table *nls, int first_time)
+{
+	int bloblen;
+
+	bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
+					  first_time);
+	pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
+
+	return bloblen;
+}
+#endif
+
 int
 CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		const struct nls_table *nls_cp)
@@ -396,6 +576,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	__u16 action;
 	int bytes_remaining;
 	struct key *spnego_key = NULL;
+	__le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
 
 	if (ses == NULL)
 		return -EINVAL;
@@ -403,6 +584,10 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	type = ses->server->secType;
 
 	cFYI(1, ("sess setup type %d", type));
+ssetup_ntlmssp_authenticate:
+	if (phase == NtLmChallenge)
+		phase = NtLmAuthenticate; /* if ntlmssp, now final phase */
+
 	if (type == LANMAN) {
 #ifndef CONFIG_CIFS_WEAK_PW_HASH
 		/* LANMAN and plaintext are less secure and off by default.
@@ -616,9 +801,49 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		goto ssetup_exit;
 #endif /* CONFIG_CIFS_UPCALL */
 	} else {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+			if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
+				cERROR(1, ("NTLMSSP requires Unicode support"));
+				rc = -ENOSYS;
+				goto ssetup_exit;
+			}
+
+			cFYI(1, ("ntlmssp session setup phase %d", phase));
+			pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+			capabilities |= CAP_EXTENDED_SECURITY;
+			pSMB->req.Capabilities |= cpu_to_le32(capabilities);
+			if (phase == NtLmNegotiate) {
+				setup_ntlmssp_neg_req(pSMB, ses);
+				iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
+			} else if (phase == NtLmAuthenticate) {
+				int blob_len;
+				blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+								  nls_cp,
+								  first_time);
+				iov[1].iov_len = blob_len;
+			} else {
+				cERROR(1, ("invalid phase %d", phase));
+				rc = -ENOSYS;
+				goto ssetup_exit;
+			}
+			iov[1].iov_base = &pSMB->req.SecurityBlob[0];
+			/* unicode strings must be word aligned */
+			if ((iov[0].iov_len + iov[1].iov_len) % 2) {
+				*bcc_ptr = 0;
+				bcc_ptr++;
+			}
+			unicode_oslm_strings(&bcc_ptr, nls_cp);
+		} else {
+			cERROR(1, ("secType %d not supported!", type));
+			rc = -ENOSYS;
+			goto ssetup_exit;
+		}
+#else
 		cERROR(1, ("secType %d not supported!", type));
 		rc = -ENOSYS;
 		goto ssetup_exit;
+#endif
 	}
 
 	iov[2].iov_base = str_area;
@@ -634,12 +859,23 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	/* SMB request buf freed in SendReceive2 */
 
 	cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
-	if (rc)
-		goto ssetup_exit;
 
 	pSMB = (SESSION_SETUP_ANDX *)iov[0].iov_base;
 	smb_buf = (struct smb_hdr *)iov[0].iov_base;
 
+	if ((type == RawNTLMSSP) && (smb_buf->Status.CifsError ==
+			cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))) {
+		if (phase != NtLmNegotiate) {
+			cERROR(1, ("Unexpected more processing error"));
+			goto ssetup_exit;
+		}
+		/* NTLMSSP Negotiate sent now processing challenge (response) */
+		phase = NtLmChallenge; /* process ntlmssp challenge */
+		rc = 0; /* MORE_PROC rc is not an error here, but expected */
+	}
+	if (rc)
+		goto ssetup_exit;
+
 	if ((smb_buf->WordCount != 3) && (smb_buf->WordCount != 4)) {
 		rc = -EIO;
 		cERROR(1, ("bad word count %d", smb_buf->WordCount));
@@ -658,12 +894,18 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	if (smb_buf->WordCount == 4) {
 		__u16 blob_len;
 		blob_len = le16_to_cpu(pSMB->resp.SecurityBlobLength);
-		bcc_ptr += blob_len;
 		if (blob_len > bytes_remaining) {
 			cERROR(1, ("bad security blob length %d", blob_len));
 			rc = -EINVAL;
 			goto ssetup_exit;
 		}
+		if (phase == NtLmChallenge) {
+			rc = decode_ntlmssp_challenge(bcc_ptr, blob_len, ses);
+			/* now goto beginning for ntlmssp authenticate phase */
+			if (rc)
+				goto ssetup_exit;
+		}
+		bcc_ptr += blob_len;
 		bytes_remaining -= blob_len;
 	}
 
@@ -692,5 +934,9 @@ ssetup_exit:
 	} else if (resp_buf_type == CIFS_LARGE_BUFFER)
 		cifs_buf_release(iov[0].iov_base);
 
+	/* if ntlmssp, and negotiate succeeded, proceed to authenticate phase */
+	if ((phase == NtLmChallenge) && (rc == 0))
+		goto ssetup_ntlmssp_authenticate;
+
 	return rc;
 }
-- 
GitLab


From 7d875a02864a35532543897195dfea2235815df8 Mon Sep 17 00:00:00 2001
From: Anders Kaseorg <andersk@MIT.EDU>
Date: Sun, 3 May 2009 22:02:55 +0200
Subject: [PATCH 1122/1421] kbuild, modpost: fix unexpected non-allocatable
 section when cross compiling

The missing TO_NATIVE(sechdrs[i].sh_flags) was causing many
unexpected non-allocatable section warnings when cross-compiling
for an architecture with a different endianness.

Fix endianness of all the fields in the ELF header and
section headers, not just some of them so we are not
hit by this anohter time.

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Tested-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/mod/modpost.c | 35 +++++++++++++++++++++++------------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 936b6f8e46f..a5c17db14ee 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -384,11 +384,19 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		return 0;
 	}
 	/* Fix endianness in ELF header */
-	hdr->e_shoff    = TO_NATIVE(hdr->e_shoff);
-	hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
-	hdr->e_shnum    = TO_NATIVE(hdr->e_shnum);
-	hdr->e_machine  = TO_NATIVE(hdr->e_machine);
-	hdr->e_type     = TO_NATIVE(hdr->e_type);
+	hdr->e_type      = TO_NATIVE(hdr->e_type);
+	hdr->e_machine   = TO_NATIVE(hdr->e_machine);
+	hdr->e_version   = TO_NATIVE(hdr->e_version);
+	hdr->e_entry     = TO_NATIVE(hdr->e_entry);
+	hdr->e_phoff     = TO_NATIVE(hdr->e_phoff);
+	hdr->e_shoff     = TO_NATIVE(hdr->e_shoff);
+	hdr->e_flags     = TO_NATIVE(hdr->e_flags);
+	hdr->e_ehsize    = TO_NATIVE(hdr->e_ehsize);
+	hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize);
+	hdr->e_phnum     = TO_NATIVE(hdr->e_phnum);
+	hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize);
+	hdr->e_shnum     = TO_NATIVE(hdr->e_shnum);
+	hdr->e_shstrndx  = TO_NATIVE(hdr->e_shstrndx);
 	sechdrs = (void *)hdr + hdr->e_shoff;
 	info->sechdrs = sechdrs;
 
@@ -402,13 +410,16 @@ static int parse_elf(struct elf_info *info, const char *filename)
 
 	/* Fix endianness in section headers */
 	for (i = 0; i < hdr->e_shnum; i++) {
-		sechdrs[i].sh_type   = TO_NATIVE(sechdrs[i].sh_type);
-		sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
-		sechdrs[i].sh_size   = TO_NATIVE(sechdrs[i].sh_size);
-		sechdrs[i].sh_link   = TO_NATIVE(sechdrs[i].sh_link);
-		sechdrs[i].sh_name   = TO_NATIVE(sechdrs[i].sh_name);
-		sechdrs[i].sh_info   = TO_NATIVE(sechdrs[i].sh_info);
-		sechdrs[i].sh_addr   = TO_NATIVE(sechdrs[i].sh_addr);
+		sechdrs[i].sh_name      = TO_NATIVE(sechdrs[i].sh_name);
+		sechdrs[i].sh_type      = TO_NATIVE(sechdrs[i].sh_type);
+		sechdrs[i].sh_flags     = TO_NATIVE(sechdrs[i].sh_flags);
+		sechdrs[i].sh_addr      = TO_NATIVE(sechdrs[i].sh_addr);
+		sechdrs[i].sh_offset    = TO_NATIVE(sechdrs[i].sh_offset);
+		sechdrs[i].sh_size      = TO_NATIVE(sechdrs[i].sh_size);
+		sechdrs[i].sh_link      = TO_NATIVE(sechdrs[i].sh_link);
+		sechdrs[i].sh_info      = TO_NATIVE(sechdrs[i].sh_info);
+		sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign);
+		sechdrs[i].sh_entsize   = TO_NATIVE(sechdrs[i].sh_entsize);
 	}
 	/* Find symbol table. */
 	for (i = 1; i < hdr->e_shnum; i++) {
-- 
GitLab


From 028ecebdd83cc4a7f8c7e96e28a5537d2ac98dae Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 3 May 2009 22:17:37 +0200
Subject: [PATCH 1123/1421] kbuild, modpost: fix "unexpected non-allocatable"
 warning with SUSE gcc

Jean reported that he saw one warning for each module like the one below:
WARNING: arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.o (.comment.SUSE.OPTs): unexpected non-allocatable section.

The warning appeared with the improved version of the
check of the flags in the sections.

That check already ignored sections named ".comment" - but SUSE store
additional info in the comment section and has named it in a SUSE
specific way. Therefore modpost failed to ignore the section.

The fix is to extend the pattern so we ignore all sections
that start with the name ".comment.".

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jean Delvare <khali@linux-fr.org>
---
 scripts/mod/modpost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index a5c17db14ee..268d4571664 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -727,7 +727,7 @@ int match(const char *sym, const char * const pat[])
 
 /* sections that we do not want to do full section mismatch check on */
 static const char *section_white_list[] =
-	{ ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+	{ ".comment*", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
 
 /*
  * This is used to find sections missing the SHF_ALLOC flag.
-- 
GitLab


From 4391ed6aa9a38cdfb48addd7a9b24a2ff099b1a7 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 4 May 2009 13:05:26 +0200
Subject: [PATCH 1124/1421] kbuild, modpost: fix unexpected non-allocatable
 warning with mips

mips emit the following debug sections:
.mdebug* and .pdr

They were included in the check for non-allocatable section
and caused modpost to warn.

Manuel Lauss suggested to fix this by adding the relevant
sections to the list of sections we do not check.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net>
---
 scripts/mod/modpost.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 268d4571664..161b7846733 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -727,7 +727,17 @@ int match(const char *sym, const char * const pat[])
 
 /* sections that we do not want to do full section mismatch check on */
 static const char *section_white_list[] =
-	{ ".comment*", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+{
+	".comment*",
+	".debug*",
+	".mdebug*",        /* alpha, score, mips etc. */
+	".pdr",            /* alpha, score, mips etc. */
+	".stab*",
+	".note*",
+	".got*",
+	".toc*",
+	NULL
+};
 
 /*
  * This is used to find sections missing the SHF_ALLOC flag.
-- 
GitLab


From 6da7342ff1c5274c51ada084974668d10f769c16 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 4 May 2009 11:44:38 +0200
Subject: [PATCH 1125/1421] amd-iommu: fix iommu flag masks

The feature bits should be set via bitmasks, not via feature IDs.

[ Impact: fix feature enabling in newer IOMMU versions ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20090504102028.GA30307@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/amd_iommu_init.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 42c33cebf00..8c0be0902da 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -49,10 +49,10 @@
 #define IVHD_DEV_EXT_SELECT             0x46
 #define IVHD_DEV_EXT_SELECT_RANGE       0x47
 
-#define IVHD_FLAG_HT_TUN_EN             0x00
-#define IVHD_FLAG_PASSPW_EN             0x01
-#define IVHD_FLAG_RESPASSPW_EN          0x02
-#define IVHD_FLAG_ISOC_EN               0x03
+#define IVHD_FLAG_HT_TUN_EN_MASK        0x01
+#define IVHD_FLAG_PASSPW_EN_MASK        0x02
+#define IVHD_FLAG_RESPASSPW_EN_MASK     0x04
+#define IVHD_FLAG_ISOC_EN_MASK          0x08
 
 #define IVMD_FLAG_EXCL_RANGE            0x08
 #define IVMD_FLAG_UNITY_MAP             0x01
@@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	 * First set the recommended feature enable bits from ACPI
 	 * into the IOMMU control registers
 	 */
-	h->flags & IVHD_FLAG_HT_TUN_EN ?
+	h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
 		iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
 		iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
 
-	h->flags & IVHD_FLAG_PASSPW_EN ?
+	h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
 		iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
 		iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
 
-	h->flags & IVHD_FLAG_RESPASSPW_EN ?
+	h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
 		iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
 		iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
 
-	h->flags & IVHD_FLAG_ISOC_EN ?
+	h->flags & IVHD_FLAG_ISOC_EN_MASK ?
 		iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
 		iommu_feature_disable(iommu, CONTROL_ISOC_EN);
 
-- 
GitLab


From 6574612fbb34c63117581e68f2231ddce027e41e Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Mon, 4 May 2009 16:03:21 +0200
Subject: [PATCH 1126/1421] ASoC: Remove BROKEN from mpc5200 kconfig

The regression was fixed by commit
3e5b50165fd0be080044586f43fcdd460ed27610, so no need to mark this
driver as BROKEN.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/fsl/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index e7dd79a1d8c..9fc90828337 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -21,7 +21,7 @@ config SND_SOC_MPC8610_HPCD
 
 config SND_SOC_MPC5200_I2S
 	tristate "Freescale MPC5200 PSC in I2S mode driver"
-	depends on PPC_MPC52xx && PPC_BESTCOMM && BROKEN
+	depends on PPC_MPC52xx && PPC_BESTCOMM
 	select SND_SOC_OF_SIMPLE
 	select PPC_BESTCOMM_GEN_BD
 	help
-- 
GitLab


From 35d11680a9d82c93eb92f08f9702b72877427b4a Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Mon, 4 May 2009 20:28:59 +0200
Subject: [PATCH 1127/1421] x86: show number of core_siblings instead of
 thread_siblings in /proc/cpuinfo

Commit 7ad728f98162cb1af06a85b2a5fc422dddd4fb78
(cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t)
changed the output of /proc/cpuinfo for siblings:

Example on an AMD Phenom:

  physical id   : 0
  siblings : 1
  core id	   : 3
  cpu cores  : 4

Before that commit it was:

  physical id	: 0
  siblings : 4
  core id	   : 3
  cpu cores  : 4

Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings.
This is due to the following hunk of above commit:

|  --- a/arch/x86/kernel/cpu/proc.c
|  +++ b/arch/x86/kernel/cpu/proc.c
|  @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf
|          if (c->x86_max_cores * smp_num_siblings > 1) {
|                  seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
|                  seq_printf(m, "siblings\t: %d\n",
|  -                          cpus_weight(per_cpu(cpu_core_map, cpu)));
|  +                          cpumask_weight(cpu_sibling_mask(cpu)));
|                  seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
|                  seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
|                  seq_printf(m, "apicid\t\t: %d\n", c->apicid);

This was a mistake, because the impact line shows that this side-effect
was not anticipated:

   Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y

So revert the respective hunk to restore the old behavior.

[ Impact: fix sibling-info regression in /proc/cpuinfo ]

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20090504182859.GA29045@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index f93047fed79..d5e30397246 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
 	if (c->x86_max_cores * smp_num_siblings > 1) {
 		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
 		seq_printf(m, "siblings\t: %d\n",
-			   cpumask_weight(cpu_sibling_mask(cpu)));
+			   cpumask_weight(cpu_core_mask(cpu)));
 		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
 		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
 		seq_printf(m, "apicid\t\t: %d\n", c->apicid);
-- 
GitLab


From f83ce3e6b02d5e48b3a43b001390e2b58820389d Mon Sep 17 00:00:00 2001
From: Jake Edge <jake@lwn.net>
Date: Mon, 4 May 2009 12:51:14 -0600
Subject: [PATCH 1128/1421] proc: avoid information leaks to non-privileged
 processes

By using the same test as is used for /proc/pid/maps and /proc/pid/smaps,
only allow processes that can ptrace() a given process to see information
that might be used to bypass address space layout randomization (ASLR).
These include eip, esp, wchan, and start_stack in /proc/pid/stat as well
as the non-symbolic output from /proc/pid/wchan.

ASLR can be bypassed by sampling eip as shown by the proof-of-concept
code at http://code.google.com/p/fuzzyaslr/ As part of a presentation
(http://www.cr0.org/paper/to-jt-linux-alsr-leak.pdf) esp and wchan were
also noted as possibly usable information leaks as well.  The
start_stack address also leaks potentially useful information.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Jake Edge <jake@lwn.net>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/array.c | 13 +++++++++----
 fs/proc/base.c  |  5 ++++-
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/fs/proc/array.c b/fs/proc/array.c
index 7e4877d9dcb..725a650bbbb 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -80,6 +80,7 @@
 #include <linux/delayacct.h>
 #include <linux/seq_file.h>
 #include <linux/pid_namespace.h>
+#include <linux/ptrace.h>
 #include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
@@ -352,6 +353,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 	char state;
 	pid_t ppid = 0, pgid = -1, sid = -1;
 	int num_threads = 0;
+	int permitted;
 	struct mm_struct *mm;
 	unsigned long long start_time;
 	unsigned long cmin_flt = 0, cmaj_flt = 0;
@@ -364,11 +366,14 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 
 	state = *get_task_state(task);
 	vsize = eip = esp = 0;
+	permitted = ptrace_may_access(task, PTRACE_MODE_READ);
 	mm = get_task_mm(task);
 	if (mm) {
 		vsize = task_vsize(mm);
-		eip = KSTK_EIP(task);
-		esp = KSTK_ESP(task);
+		if (permitted) {
+			eip = KSTK_EIP(task);
+			esp = KSTK_ESP(task);
+		}
 	}
 
 	get_task_comm(tcomm, task);
@@ -424,7 +429,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 		unlock_task_sighand(task, &flags);
 	}
 
-	if (!whole || num_threads < 2)
+	if (permitted && (!whole || num_threads < 2))
 		wchan = get_wchan(task);
 	if (!whole) {
 		min_flt = task->min_flt;
@@ -476,7 +481,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 		rsslim,
 		mm ? mm->start_code : 0,
 		mm ? mm->end_code : 0,
-		mm ? mm->start_stack : 0,
+		(permitted && mm) ? mm->start_stack : 0,
 		esp,
 		eip,
 		/* The signal information here is obsolete.
diff --git a/fs/proc/base.c b/fs/proc/base.c
index aa763ab0077..fb45615943c 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -322,7 +322,10 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer)
 	wchan = get_wchan(task);
 
 	if (lookup_symbol_name(wchan, symname) < 0)
-		return sprintf(buffer, "%lu", wchan);
+		if (!ptrace_may_access(task, PTRACE_MODE_READ))
+			return 0;
+		else
+			return sprintf(buffer, "%lu", wchan);
 	else
 		return sprintf(buffer, "%s", symname);
 }
-- 
GitLab


From 65c90bca0dba56f60dc4ce2a529140c3cc440f22 Mon Sep 17 00:00:00 2001
From: Stephen Smalley <sds@tycho.nsa.gov>
Date: Mon, 4 May 2009 15:43:18 -0400
Subject: [PATCH 1129/1421] selinux: Fix send_sigiotask hook

The CRED patch incorrectly converted the SELinux send_sigiotask hook to
use the current task SID rather than the target task SID in its
permission check, yielding the wrong permission check.  This fixes the
hook function.  Detected by the ltp selinux testsuite and confirmed to
correct the test failure.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/selinux/hooks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index ba808ef6bab..2fcad7c33ea 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3153,7 +3153,7 @@ static int selinux_file_send_sigiotask(struct task_struct *tsk,
 				       struct fown_struct *fown, int signum)
 {
 	struct file *file;
-	u32 sid = current_sid();
+	u32 sid = task_sid(tsk);
 	u32 perm;
 	struct file_security_struct *fsec;
 
-- 
GitLab


From f2d41ecb0f096e4fc58d1456c9d54560f6e2b955 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 4 May 2009 12:02:23 -0400
Subject: [PATCH 1130/1421] [ARM] Kirkwood: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/kirkwood_defconfig | 92 +++++++++++++++++++++--------
 1 file changed, 69 insertions(+), 23 deletions(-)

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index c367ae44012..dcf8153a947 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar  3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 11:58:57 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -237,6 +241,7 @@ CONFIG_AEABI=y
 CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -293,7 +300,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 
 #
@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 7e14acb44021132e66801066e9e7527300c5fc10 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 4 May 2009 14:09:33 -0400
Subject: [PATCH 1131/1421] [ARM] orion5x: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/orion5x_defconfig | 363 ++++++++++++++++++++++-------
 1 file changed, 279 insertions(+), 84 deletions(-)

diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 020e6a8a9e5..5b98f764511 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 14:07:25 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Orion Implementations
@@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
 CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
 CONFIG_MACH_TS409=y
@@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_ORION=y
 
 #
@@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
@@ -269,6 +275,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -285,13 +296,18 @@ CONFIG_VFP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -397,6 +424,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
@@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
@@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -663,6 +709,7 @@ CONFIG_SATA_MV=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -680,19 +746,25 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -702,10 +774,12 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -911,14 +988,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1013,9 +1103,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1030,10 +1147,13 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
@@ -1540,7 +1735,7 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 3a5df4bf2a1829a342f3a416c217049e8caa0a1b Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 4 May 2009 14:28:59 -0400
Subject: [PATCH 1132/1421] [ARM] mv78xx0: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/mv78xx0_defconfig | 429 ++++++++++++++++++++++-------
 1 file changed, 335 insertions(+), 94 deletions(-)

diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index b0698722e0c..398274b0771 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 14:22:12 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
@@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -87,10 +98,9 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Marvell MV78xx0 Implementations
 #
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_ORION=y
 
 #
@@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
 
 #
 # Bus support
@@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -247,6 +260,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -263,6 +281,8 @@ CONFIG_VFP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -376,6 +392,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
@@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
@@ -465,6 +481,11 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -632,11 +669,15 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -654,19 +714,25 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -676,18 +742,20 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -799,44 +873,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -855,14 +949,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -877,10 +974,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -900,20 +1002,28 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -958,9 +1064,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1150,6 +1327,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 4ccc28f725bc2b7b0a3bc27e9c15f4eaf63fb812 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 5 May 2009 08:39:24 +0200
Subject: [PATCH 1133/1421] i2c: Timeouts off by 1

with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1
after the loop, so the tests below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/busses/i2c-ali1535.c | 2 +-
 drivers/i2c/busses/i2c-ali15x3.c | 2 +-
 drivers/i2c/busses/i2c-amd756.c  | 4 ++--
 drivers/i2c/busses/i2c-i801.c    | 8 ++++----
 drivers/i2c/busses/i2c-isch.c    | 2 +-
 drivers/i2c/busses/i2c-nforce2.c | 2 +-
 drivers/i2c/busses/i2c-sis5595.c | 2 +-
 drivers/i2c/busses/i2c-sis630.c  | 2 +-
 drivers/i2c/busses/i2c-sis96x.c  | 2 +-
 9 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 981e080b32a..d108450df06 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -284,7 +284,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 		 && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "SMBus Timeout!\n");
 	}
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 39066dee46e..d627fceb790 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -306,7 +306,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 		 && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		result = -ETIMEDOUT;
 		dev_err(&adap->dev, "SMBus Timeout!\n");
 	}
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 220f4a1eee1..f7d6fe9c49b 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -126,7 +126,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
 		} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
 		         (timeout++ < MAX_TIMEOUT));
 		/* If the SMBus is still busy, we give up */
-		if (timeout >= MAX_TIMEOUT) {
+		if (timeout > MAX_TIMEOUT) {
 			dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
 			goto abort;
 		}
@@ -143,7 +143,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
 	} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		dev_dbg(&adap->dev, "Completion timeout!\n");
 		goto abort;
 	}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 10411848fd7..9d2c5adf5d4 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -237,7 +237,7 @@ static int i801_transaction(int xact)
 		status = inb_p(SMBHSTSTS);
 	} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
 
-	result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+	result = i801_check_post(status, timeout > MAX_TIMEOUT);
 	if (result < 0)
 		return result;
 
@@ -257,9 +257,9 @@ static void i801_wait_hwpec(void)
 	} while ((!(status & SMBHSTSTS_INTR))
 		 && (timeout++ < MAX_TIMEOUT));
 
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT)
 		dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
-	}
+
 	outb_p(status, SMBHSTSTS);
 }
 
@@ -344,7 +344,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
 		while ((!(status & SMBHSTSTS_BYTE_DONE))
 		       && (timeout++ < MAX_TIMEOUT));
 
-		result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+		result = i801_check_post(status, timeout > MAX_TIMEOUT);
 		if (result < 0)
 			return result;
 
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index b9c01aa9003..9f6b8e0f863 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -112,7 +112,7 @@ static int sch_transaction(void)
 	} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
 		result = -ETIMEDOUT;
 	}
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 2ff4683703a..ec11d1c4e77 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -173,7 +173,7 @@ static int nforce2_check_status(struct i2c_adapter *adap)
 		temp = inb_p(NVIDIA_SMB_STS);
 	} while ((!temp) && (timeout++ < MAX_TIMEOUT));
 
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		dev_dbg(&adap->dev, "SMBus Timeout!\n");
 		if (smbus->can_abort)
 			nforce2_abort(adap);
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index f320ab27da4..139f0c7f12a 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -256,7 +256,7 @@ static int sis5595_transaction(struct i2c_adapter *adap)
 	} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		dev_dbg(&adap->dev, "SMBus Timeout!\n");
 		result = -ETIMEDOUT;
 	}
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 50c3610e602..70ca41e90e5 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -173,7 +173,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
 	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		dev_dbg(&adap->dev, "SMBus Timeout!\n");
 		result = -ETIMEDOUT;
 	}
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 7e1594b4057..8295885b2fd 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -132,7 +132,7 @@ static int sis96x_transaction(int size)
 	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout > MAX_TIMEOUT) {
 		dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
 		result = -ETIMEDOUT;
 	}
-- 
GitLab


From 0cdba07bb23cdd3e0d64357ec3d983e6b75e541f Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Tue, 5 May 2009 08:39:24 +0200
Subject: [PATCH 1134/1421] i2c-algo-bit: Fix timeout test

When fetching DDC using i2c algo bit, we were often seeing timeouts
before getting valid EDID on a retry. The VESA spec states 2ms is the
DDC timeout, so when this translates into 1 jiffie and we are close
to the end of the time period, it could return with a timeout less than
2ms.

Change this code to use time_after instead of time_after_eq.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/algos/i2c-algo-bit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index d420cc5f563..e25e13980af 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -104,7 +104,7 @@ static int sclhi(struct i2c_algo_bit_data *adap)
 		 * chips may hold it low ("clock stretching") while they
 		 * are processing data internally.
 		 */
-		if (time_after_eq(jiffies, start + adap->timeout))
+		if (time_after(jiffies, start + adap->timeout))
 			return -ETIMEDOUT;
 		cond_resched();
 	}
-- 
GitLab


From 2196d1cf4afab93fb64c2e5b417096e49b661612 Mon Sep 17 00:00:00 2001
From: Enrik Berkhan <Enrik.Berkhan@ge.com>
Date: Tue, 5 May 2009 08:39:25 +0200
Subject: [PATCH 1135/1421] i2c-algo-pca: Let PCA9564 recover from unacked data
 byte (state 0x30)

Currently, the i2c-algo-pca driver does nothing if the chip enters state
0x30 (Data byte in I2CDAT has been transmitted; NOT ACK has been
received).  Thus, the i2c bus connected to the controller gets stuck
afterwards.

I have seen this kind of error on a custom board in certain load
situations most probably caused by interference or noise.

A possible reaction is to let the controller generate a STOP condition.
This is documented in the PCA9564 data sheet (2006-09-01) and the same
is done for other NACK states as well.

Further, state 0x38 isn't handled completely, either. Try to do another
START in this case like the data sheet says. As this couldn't be tested,
I've added a comment to try to reset the chip if the START doesn't help
as suggested by Wolfram Sang.

Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/algos/i2c-algo-pca.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 6318f7ddc1d..78d42aae008 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -287,10 +287,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 		case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
 			DEB2("NOT ACK received after data byte\n");
+			pca_stop(adap);
 			goto out;
 
 		case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
 			DEB2("Arbitration lost\n");
+			/*
+			 * The PCA9564 data sheet (2006-09-01) says "A
+			 * START condition will be transmitted when the
+			 * bus becomes free (STOP or SCL and SDA high)"
+			 * when the STA bit is set (p. 11).
+			 *
+			 * In case this won't work, try pca_reset()
+			 * instead.
+			 */
+			pca_start(adap);
 			goto out;
 
 		case 0x58: /* Data byte has been received; NOT ACK has been returned */
-- 
GitLab


From de0096d80980e26fab16ac3eff57f47fadad92cb Mon Sep 17 00:00:00 2001
From: Martin Fuzzey <mfuzzey@gmail.com>
Date: Thu, 26 Mar 2009 22:21:16 +0100
Subject: [PATCH 1136/1421] mxc : Clean up properly when imx_dma_free() used
 without imx_dma_disable()

The sequence
	imx_dma_request()
	imx_dma_enable()
	imx_dma_free()
left the dma channel in_use mode and did not release the timer.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/dma-mx1-mx2.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index e364a5ed10f..a9126ed7935 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -737,10 +737,7 @@ void imx_dma_free(int channel)
 
 	local_irq_save(flags);
 	/* Disable interrupts */
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dma_disable(channel);
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2
-- 
GitLab


From f2292532a5f0cf6359adca349cdd2a0150581937 Mon Sep 17 00:00:00 2001
From: Martin Fuzzey <mfuzzey@gmail.com>
Date: Thu, 26 Mar 2009 22:27:52 +0100
Subject: [PATCH 1137/1421] mxc : BUG in imx_dma_request

On MX2 platforms imx_dma_request() calls request_irq() which may sleep
with interrupts disabled.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/dma-mx1-mx2.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index a9126ed7935..77646436c00 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
 		local_irq_restore(flags);
 		return -EBUSY;
 	}
+	memset(imxdma, 0, sizeof(imxdma));
+	imxdma->name = name;
+	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
 	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
 			NULL);
 	if (ret) {
-		local_irq_restore(flags);
+		imxdma->name = NULL;
 		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
 				MXC_INT_DMACH0 + channel, channel);
 		return ret;
@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
 	imxdma->watchdog.data = channel;
 #endif
 
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-
-	local_irq_restore(flags);
 	return ret;
 }
 EXPORT_SYMBOL(imx_dma_request);
-- 
GitLab


From 9abf137c6dbf6eabb3add98fcd8352c3dd520568 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 16 Apr 2009 14:12:54 +0200
Subject: [PATCH 1138/1421] ARM: ARCH_MXC should select HAVE_CLK

All i.MX platforms support <linux/clk.h> calls and should select HAVE_CLK.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9faccc411c2..e60ec54df33 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -454,6 +454,7 @@ config ARCH_MXC
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
-- 
GitLab


From f1fd4c64af58ec28d29bced9e94ecf6d5177c2b0 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Fri, 17 Apr 2009 15:20:26 +0200
Subject: [PATCH 1139/1421] mx31: remove mx31moboard_defconfig

We want to have a mx31_defconfig file that builds a kernel that is able
to boot on all support mx31 systems and thus also can be better tested
by automatic build scripts. For these reasons, this config file is not
needed anymore.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx31moboard_defconfig | 790 -------------------------
 1 file changed, 790 deletions(-)
 delete mode 100644 arch/arm/configs/mx31moboard_defconfig

diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig
deleted file mode 100644
index e90f86d6dee..00000000000
--- a/arch/arm/configs/mx31moboard_defconfig
+++ /dev/null
@@ -1,790 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-- 
GitLab


From e2c97e7fdc9d71637840dea8f76eb3782c3b2023 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 21 Apr 2009 12:39:59 +0200
Subject: [PATCH 1140/1421] MXC: remove BUG_ON in interrupt handler

On i.MX31 I sometimes get spurious interrupts. There is no need
to crash the whole system when this happens. Instead, silently
ignore it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index c6483bad8a2..89e95798cc3 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	irq_stat = __raw_readl(port->base + GPIO_ISR) &
 			__raw_readl(port->base + GPIO_IMR);
-	BUG_ON(!irq_stat);
+
 	mxc_gpio_irq_handler(port, irq_stat);
 }
 #endif
-- 
GitLab


From 7b9020badf78327b3fcb567b466a1dd4d33710ce Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 21 Apr 2009 22:56:14 +0200
Subject: [PATCH 1141/1421] mx27ads: move PBC mapping out of vmalloc space
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Before this patch I got the following line in my dmesg:

	[    0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space

VMALLOC_END is 0xf4000000 and there are the following other mappings
defined for mx27ads:

	(0xa0500000,+0x00001000) maps to 0xffff0000
	(0x10000000,+0x00100000) maps to 0xf4000000
	(0x80000000,+0x00100000) maps to 0xf4100000
	(0xd8000000,+0x00100000) maps to 0xf4200000

So map PBC to 0xf4300000.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/board-mx27ads.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 1cac9d1135c..d42f4e6116f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -47,7 +47,7 @@
 /*
  * Base address of PBC controller, CS4
  */
-#define PBC_BASE_ADDRESS        0xEB000000
+#define PBC_BASE_ADDRESS        0xf4300000
 #define PBC_REG_ADDR(offset)    (void __force __iomem *) \
 		(PBC_BASE_ADDRESS + (offset))
 
-- 
GitLab


From b09de4209d179c92ab880d911e72a892d053ff01 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 8 Apr 2009 11:45:47 +0200
Subject: [PATCH 1142/1421] mx3fb: Fix compilation with CONFIG_PM

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/video/mx3fb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 21b3692092f..9894de1c9b9 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = {
  */
 static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-	struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
 
 	acquire_console_sem();
-	fb_set_suspend(drv_data->fbi, 1);
+	fb_set_suspend(mx3fb->fbi, 1);
 	release_console_sem();
 
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
@@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
  */
 static int mx3fb_resume(struct platform_device *pdev)
 {
-	struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-	struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
 
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
 		sdc_enable_channel(mx3_fbi);
-		sdc_set_brightness(mx3fb, drv_data->backlight_level);
+		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
 	}
 
 	acquire_console_sem();
-	fb_set_suspend(drv_data->fbi, 0);
+	fb_set_suspend(mx3fb->fbi, 0);
 	release_console_sem();
 
 	return 0;
-- 
GitLab


From 25971dfe3a9d14c3b91fc51de96d7f48da394c99 Mon Sep 17 00:00:00 2001
From: Magnus Lilja <lilja.magnus@gmail.com>
Date: Sat, 18 Apr 2009 18:20:50 +0200
Subject: [PATCH 1143/1421] i.MX31: Disable CPU_32v6K in mx3_defconfig.

The i.MX31 ARM11 core is not a v6K core. Disable this option as it
is incompatible with non v6K cores.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx3_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 72a8201a537..20ada526f6d 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y
-- 
GitLab


From 97a775c49c7e1b47b016a492463486a5b86da479 Mon Sep 17 00:00:00 2001
From: Jinyoung Park <parkjy@mtekvision.com>
Date: Fri, 1 May 2009 12:54:31 +0100
Subject: [PATCH 1144/1421] ASoC: Fix errors in WM8990

The mis-typing exist in dapm controller definitions and dapm route definitions,
so happen mis-matched error when snd_soc_dapm_add_routes().

Cc: stable@kernel.org
Signed-off-by: Jinyoung Park <parkjy@mtekvision.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com
---
 sound/soc/codecs/wm8990.c | 40 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index c518c3e5aa3..40cd274eb1e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -729,7 +729,7 @@ SND_SOC_DAPM_MIXER_E("INMIXL", WM8990_INTDRIVBITS, WM8990_INMIXL_PWR_BIT, 0,
 	inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
 /* AINLMUX */
-SND_SOC_DAPM_MUX_E("AILNMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINLMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
 	&wm8990_dapm_ainlmux_controls, inmixer_event,
 	SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
@@ -740,7 +740,7 @@ SND_SOC_DAPM_MIXER_E("INMIXR", WM8990_INTDRIVBITS, WM8990_INMIXR_PWR_BIT, 0,
 	inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
 /* AINRMUX */
-SND_SOC_DAPM_MUX_E("AIRNMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINRMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
 	&wm8990_dapm_ainrmux_controls, inmixer_event,
 	SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
@@ -848,40 +848,40 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"LIN12 PGA", "LIN2 Switch", "LIN2"},
 	/* LIN34 PGA */
 	{"LIN34 PGA", "LIN3 Switch", "LIN3"},
-	{"LIN34 PGA", "LIN4 Switch", "LIN4"},
+	{"LIN34 PGA", "LIN4 Switch", "LIN4/RXN"},
 	/* INMIXL */
 	{"INMIXL", "Record Left Volume", "LOMIX"},
 	{"INMIXL", "LIN2 Volume", "LIN2"},
 	{"INMIXL", "LINPGA12 Switch", "LIN12 PGA"},
 	{"INMIXL", "LINPGA34 Switch", "LIN34 PGA"},
-	/* AILNMUX */
-	{"AILNMUX", "INMIXL Mix", "INMIXL"},
-	{"AILNMUX", "DIFFINL Mix", "LIN12PGA"},
-	{"AILNMUX", "DIFFINL Mix", "LIN34PGA"},
-	{"AILNMUX", "RXVOICE Mix", "LIN4/RXN"},
-	{"AILNMUX", "RXVOICE Mix", "RIN4/RXP"},
+	/* AINLMUX */
+	{"AINLMUX", "INMIXL Mix", "INMIXL"},
+	{"AINLMUX", "DIFFINL Mix", "LIN12 PGA"},
+	{"AINLMUX", "DIFFINL Mix", "LIN34 PGA"},
+	{"AINLMUX", "RXVOICE Mix", "LIN4/RXN"},
+	{"AINLMUX", "RXVOICE Mix", "RIN4/RXP"},
 	/* ADC */
-	{"Left ADC", NULL, "AILNMUX"},
+	{"Left ADC", NULL, "AINLMUX"},
 
 	/* RIN12 PGA */
 	{"RIN12 PGA", "RIN1 Switch", "RIN1"},
 	{"RIN12 PGA", "RIN2 Switch", "RIN2"},
 	/* RIN34 PGA */
 	{"RIN34 PGA", "RIN3 Switch", "RIN3"},
-	{"RIN34 PGA", "RIN4 Switch", "RIN4"},
+	{"RIN34 PGA", "RIN4 Switch", "RIN4/RXP"},
 	/* INMIXL */
 	{"INMIXR", "Record Right Volume", "ROMIX"},
 	{"INMIXR", "RIN2 Volume", "RIN2"},
 	{"INMIXR", "RINPGA12 Switch", "RIN12 PGA"},
 	{"INMIXR", "RINPGA34 Switch", "RIN34 PGA"},
-	/* AIRNMUX */
-	{"AIRNMUX", "INMIXR Mix", "INMIXR"},
-	{"AIRNMUX", "DIFFINR Mix", "RIN12PGA"},
-	{"AIRNMUX", "DIFFINR Mix", "RIN34PGA"},
-	{"AIRNMUX", "RXVOICE Mix", "RIN4/RXN"},
-	{"AIRNMUX", "RXVOICE Mix", "RIN4/RXP"},
+	/* AINRMUX */
+	{"AINRMUX", "INMIXR Mix", "INMIXR"},
+	{"AINRMUX", "DIFFINR Mix", "RIN12 PGA"},
+	{"AINRMUX", "DIFFINR Mix", "RIN34 PGA"},
+	{"AINRMUX", "RXVOICE Mix", "LIN4/RXN"},
+	{"AINRMUX", "RXVOICE Mix", "RIN4/RXP"},
 	/* ADC */
-	{"Right ADC", NULL, "AIRNMUX"},
+	{"Right ADC", NULL, "AINRMUX"},
 
 	/* LOMIX */
 	{"LOMIX", "LOMIX RIN3 Bypass Switch", "RIN3"},
@@ -922,7 +922,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"LOPMIX", "LOPMIX Left Mixer PGA Switch", "LOPGA"},
 
 	/* OUT3MIX */
-	{"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXP"},
+	{"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXN"},
 	{"OUT3MIX", "OUT3MIX Left Out PGA Switch", "LOPGA"},
 
 	/* OUT4MIX */
@@ -949,7 +949,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	/* Output Pins */
 	{"LON", NULL, "LONMIX"},
 	{"LOP", NULL, "LOPMIX"},
-	{"OUT", NULL, "OUT3MIX"},
+	{"OUT3", NULL, "OUT3MIX"},
 	{"LOUT", NULL, "LOUT PGA"},
 	{"SPKN", NULL, "SPKMIX"},
 	{"ROUT", NULL, "ROUT PGA"},
-- 
GitLab


From bd0185ceaca7ef17d5c9c094882a5aabe8eff677 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 5 May 2009 15:39:39 +0200
Subject: [PATCH 1145/1421] sound: serial-u16550: fix buffer overflow

Remove most of the serial port parameters from the card longname string
because it was way too long and overflowed into the mixername string.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/drivers/serial-u16550.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index b2b6d50c942..a25fb7b1f44 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -963,16 +963,11 @@ static int __devinit snd_serial_probe(struct platform_device *devptr)
 	if (err < 0)
 		goto _err;
 
-	sprintf(card->longname, "%s at 0x%lx, irq %d speed %d div %d outs %d ins %d adaptor %s droponfull %d",
+	sprintf(card->longname, "%s [%s] at %#lx, irq %d",
 		card->shortname,
-		uart->base,
-		uart->irq,
-		uart->speed,
-		(int)uart->divisor,
-		outs[dev],
-		ins[dev],
 		adaptor_names[uart->adaptor],
-		uart->drop_on_full);
+		uart->base,
+		uart->irq);
 
 	snd_card_set_dev(card, &devptr->dev);
 
-- 
GitLab


From b452e08e73c0e3dbb0be82130217be4b7084299e Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 5 May 2009 15:40:12 +0200
Subject: [PATCH 1146/1421] sound: via82xx: fix DXS volume range

With 5 bits and 1.5 dB per step, the DXS volume range is only 48 dB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/via82xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 809b233dd4a..1ef58c51c21 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -1687,7 +1687,7 @@ static int snd_via8233_pcmdxs_volume_put(struct snd_kcontrol *kcontrol,
 	return change;
 }
 
-static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -9450, 150, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -4650, 150, 1);
 
 static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata = {
 	.name = "PCM Playback Volume",
-- 
GitLab


From 0692698cb7369ea1ce74f3f87f70baf5072f8a37 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Tue, 5 May 2009 13:57:52 +0100
Subject: [PATCH 1147/1421] [IA64] xen_domu_defconfig: fix build
 issues/warnings

- drivers/xen/events.c did not compile
- xen_setup_hook caused a modpost section warning
- the use of u64 (instead of unsigned long long) together with a %llu
  in drivers/xen/balloon.c caused a compiler warning

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/idle.h       | 7 +++++++
 arch/ia64/include/asm/xen/events.h | 7 +------
 arch/ia64/xen/xensetup.S           | 2 --
 drivers/xen/balloon.c              | 3 ++-
 4 files changed, 10 insertions(+), 9 deletions(-)
 create mode 100644 arch/ia64/include/asm/idle.h

diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h
new file mode 100644
index 00000000000..b7685015a8b
--- /dev/null
+++ b/arch/ia64/include/asm/idle.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_IA64_IDLE_H
+#define _ASM_IA64_IDLE_H
+
+static inline void enter_idle(void) { }
+static inline void exit_idle(void) { }
+
+#endif /* _ASM_IA64_IDLE_H */
diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h
index 73248781fba..b8370c8b619 100644
--- a/arch/ia64/include/asm/xen/events.h
+++ b/arch/ia64/include/asm/xen/events.h
@@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 	return !(ia64_psr(regs)->i);
 }
 
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+static inline void handle_irq(int irq, struct pt_regs *regs)
 {
-	struct pt_regs *old_regs;
-	old_regs = set_irq_regs(regs);
-	irq_enter();
 	__do_IRQ(irq);
-	irq_exit();
-	set_irq_regs(old_regs);
 }
 #define irq_ctx_init(cpu)	do { } while (0)
 
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
index 28fed1fcc07..aff8346ea19 100644
--- a/arch/ia64/xen/xensetup.S
+++ b/arch/ia64/xen/xensetup.S
@@ -54,8 +54,6 @@ END(startup_xen)
 
 #define isBP	p3	// are we the Bootstrap Processor?
 
-	.text
-
 GLOBAL_ENTRY(xen_setup_hook)
 	mov r8=XEN_PV_DOMAIN_ASM
 (isBP)	movl r9=xen_domain_type;;
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index efa4b363ce7..f5bbd9e8341 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr
 			      char *buf)
 {
 	return sprintf(buf, "%llu\n",
-		       (u64)balloon_stats.target_pages << PAGE_SHIFT);
+		       (unsigned long long)balloon_stats.target_pages
+		       << PAGE_SHIFT);
 }
 
 static ssize_t store_target(struct sys_device *dev,
-- 
GitLab


From ca50a51e890b0a62b44b5642c1ba5049909e5a8b Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Thu, 16 Apr 2009 05:54:12 +1000
Subject: [PATCH 1148/1421] ipu_idmac: Use disable_irq_nosync() from within irq
 handlers.

disable_irq() should wait for all running handlers to complete
before returning.  As such, if it's used to disable an interrupt
from that interrupt's handler it will deadlock.  This replaces
the dangerous instances with the _nosync() variant which doesn't
have this problem.

Note the 2 handlers in question are only used #ifdef DEBUG so
I imagine these code paths don't get hit often.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ipu/ipu_idmac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index e202a6ce557..3a4deea78a7 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1547,7 +1547,7 @@ static irqreturn_t ic_sof_irq(int irq, void *dev_id)
 	struct idmac_channel *ichan = dev_id;
 	printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n",
 	       irq, ichan->dma_chan.chan_id);
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	return IRQ_HANDLED;
 }
 
@@ -1556,7 +1556,7 @@ static irqreturn_t ic_eof_irq(int irq, void *dev_id)
 	struct idmac_channel *ichan = dev_id;
 	printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n",
 	       irq, ichan->dma_chan.chan_id);
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	return IRQ_HANDLED;
 }
 
-- 
GitLab


From 029091df01116aff8dea89ce96a0a2534401803a Mon Sep 17 00:00:00 2001
From: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Date: Thu, 30 Apr 2009 14:48:29 +0800
Subject: [PATCH 1149/1421] PCI: Fix pci-e port driver slot_reset bad default
 return value

When an upstream port reports an AER error to root port, kernel
starts error recovery procedures. The default return value of
function pcie_portdrv_slot_reset is PCI_ERS_RESULT_NONE. If all
port service drivers of the downstream port under the upstream
port have no slot_reset method in pci_error_handlers, AER recovery
would stop without resume. Below patch against 2.6.30-rc3 fixes it.

Signed-off-by: Zhang Yanmin <yanmin.zhang@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pcie/aer/aerdrv.h  | 3 +++
 drivers/pci/pcie/portdrv_pci.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index c7ad68b6c6d..aa14482a477 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -95,6 +95,9 @@ struct aer_broadcast_data {
 static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
 		enum pci_ers_result new)
 {
+	if (new == PCI_ERS_RESULT_NONE)
+		return orig;
+
 	switch (orig) {
 	case PCI_ERS_RESULT_CAN_RECOVER:
 	case PCI_ERS_RESULT_RECOVERED:
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b924e2463f8..091ce70051e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data)
 
 static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
 {
-	pci_ers_result_t status = PCI_ERS_RESULT_NONE;
+	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
 	int retval;
 
 	/* If fatal, restore cfg space for possible link reset at upstream */
-- 
GitLab


From a425a638c858fd10370b573bde81df3ba500e271 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Tue, 5 May 2009 16:37:17 +0100
Subject: [PATCH 1150/1421] Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed
 regions

madvise(MADV_WILLNEED) forces page cache readahead on a range of memory
backed by a file.  The assumption is made that the page required is
order-0 and "normal" page cache.

On hugetlbfs, this assumption is not true and order-0 pages are
allocated and inserted into the hugetlbfs page cache.  This leaks
hugetlbfs page reservations and can cause BUGs to trigger related to
corrupted page tables.

This patch causes MADV_WILLNEED to be ignored for hugetlbfs-backed
regions.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/madvise.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/mm/madvise.c b/mm/madvise.c
index b9ce574827c..36d6ea2b634 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -112,6 +112,14 @@ static long madvise_willneed(struct vm_area_struct * vma,
 	if (!file)
 		return -EBADF;
 
+	/*
+	 * Page cache readahead assumes page cache pages are order-0 which
+	 * is not the case for hugetlbfs. Do not give a bad return value
+	 * but ignore the advice.
+	 */
+	if (vma->vm_flags & VM_HUGETLB)
+		return 0;
+
 	if (file->f_mapping->a_ops->get_xip_mem) {
 		/* no bad return value, but ignore advice */
 		return 0;
-- 
GitLab


From 42beefc0093725ec0f8cea340cc54c36ccaceea0 Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Wed, 6 May 2009 09:04:52 +1000
Subject: [PATCH 1151/1421] drm/r128: fix r128 ioremaps to use ioremap_wc.

This should allow r128 to start working again since PAT changes.

taken from F-11 kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/r128/r128_cce.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c
index 32de4cedc36..077c0455a6b 100644
--- a/drivers/gpu/drm/r128/r128_cce.c
+++ b/drivers/gpu/drm/r128/r128_cce.c
@@ -511,9 +511,9 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
 
 #if __OS_HAS_AGP
 	if (!dev_priv->is_pci) {
-		drm_core_ioremap(dev_priv->cce_ring, dev);
-		drm_core_ioremap(dev_priv->ring_rptr, dev);
-		drm_core_ioremap(dev->agp_buffer_map, dev);
+		drm_core_ioremap_wc(dev_priv->cce_ring, dev);
+		drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
+		drm_core_ioremap_wc(dev->agp_buffer_map, dev);
 		if (!dev_priv->cce_ring->handle ||
 		    !dev_priv->ring_rptr->handle ||
 		    !dev->agp_buffer_map->handle) {
-- 
GitLab


From 844823cb822932d2c599abf38692e3d6a5b5a320 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 6 May 2009 00:48:30 +0000
Subject: [PATCH 1152/1421] [CIFS] Fix SMB uid in NTLMSSP authenticate request

We were not setting the SMB uid in NTLMSSP authenticate
request which could lead to INVALID_PARAMETER error
on 2nd session setup.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index e68744e169b..897a052270f 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -822,6 +822,10 @@ ssetup_ntlmssp_authenticate:
 								  nls_cp,
 								  first_time);
 				iov[1].iov_len = blob_len;
+				/* Make sure that we tell the server that we
+				   are using the uid that it just gave us back
+				   on the response (challenge) */
+				smb_buf->Uid = ses->Suid;
 			} else {
 				cERROR(1, ("invalid phase %d", phase));
 				rc = -ENOSYS;
-- 
GitLab


From ac68392460ffefed13020967bae04edc4d3add06 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 6 May 2009 04:16:04 +0000
Subject: [PATCH 1153/1421] [CIFS] Allow raw ntlmssp code to be enabled with
 sec=ntlmssp

On mount, "sec=ntlmssp" can now be specified to allow
"rawntlmssp" security to be enabled during
CIFS session establishment/authentication (ntlmssp used to
require specifying krb5 which was counterintuitive).

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/README     | 10 +++++++++-
 fs/cifs/cifsglob.h | 16 +++++++++-------
 fs/cifs/cifssmb.c  | 10 ++++++++++
 fs/cifs/connect.c  |  7 +++++++
 4 files changed, 35 insertions(+), 8 deletions(-)

diff --git a/fs/cifs/README b/fs/cifs/README
index 07434181623..db208ddb989 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -651,7 +651,15 @@ Experimental            When set to 1 used to enable certain experimental
 			signing turned on in case buffer was modified
 			just before it was sent, also this flag will
 			be used to use the new experimental directory change 
-			notification code).
+			notification code).  When set to 2 enables
+			an additional experimental feature, "raw ntlmssp"
+			session establishment support (which allows
+			specifying "sec=ntlmssp" on mount). The Linux cifs
+			module will use ntlmv2 authentication encapsulated
+			in "raw ntlmssp" (not using SPNEGO) when
+			"sec=ntlmssp" is specified on mount.
+			This support also requires building cifs with
+			the CONFIG_CIFS_EXPERIMENTAL configuration flag.
 
 These experimental features and tracing can be enabled by changing flags in 
 /proc/fs/cifs (after the cifs module has been installed or built into the 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index df40ab64cd9..a61ab772c6f 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -82,8 +82,8 @@ enum securityEnum {
 	LANMAN,			/* Legacy LANMAN auth */
 	NTLM,			/* Legacy NTLM012 auth with NTLM hash */
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
-	RawNTLMSSP,		/* NTLMSSP without SPNEGO */
-	NTLMSSP,		/* NTLMSSP via SPNEGO */
+	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
+	NTLMSSP,		/* NTLMSSP via SPNEGO, NTLMv2 hash */
 	Kerberos,		/* Kerberos via SPNEGO */
 	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
@@ -531,6 +531,7 @@ static inline void free_dfs_info_array(struct dfs_info3_param *param,
 #define   CIFSSEC_MAY_PLNTXT    0
 #endif /* weak passwords */
 #define   CIFSSEC_MAY_SEAL	0x00040 /* not supported yet */
+#define   CIFSSEC_MAY_NTLMSSP	0x00080 /* raw ntlmssp with ntlmv2 */
 
 #define   CIFSSEC_MUST_SIGN	0x01001
 /* note that only one of the following can be set so the
@@ -543,22 +544,23 @@ require use of the stronger protocol */
 #define   CIFSSEC_MUST_LANMAN	0x10010
 #define   CIFSSEC_MUST_PLNTXT	0x20020
 #ifdef CONFIG_CIFS_UPCALL
-#define   CIFSSEC_MASK          0x3F03F /* allows weak security but also krb5 */
+#define   CIFSSEC_MASK          0xAF0AF /* allows weak security but also krb5 */
 #else
-#define   CIFSSEC_MASK          0x37037 /* current flags supported if weak */
+#define   CIFSSEC_MASK          0xA70A7 /* current flags supported if weak */
 #endif /* UPCALL */
 #else /* do not allow weak pw hash */
 #ifdef CONFIG_CIFS_UPCALL
-#define   CIFSSEC_MASK          0x0F00F /* flags supported if no weak allowed */
+#define   CIFSSEC_MASK          0x8F08F /* flags supported if no weak allowed */
 #else
-#define	  CIFSSEC_MASK          0x07007 /* flags supported if no weak allowed */
+#define	  CIFSSEC_MASK          0x87087 /* flags supported if no weak allowed */
 #endif /* UPCALL */
 #endif /* WEAK_PW_HASH */
 #define   CIFSSEC_MUST_SEAL	0x40040 /* not supported yet */
+#define   CIFSSEC_MUST_NTLMSSP	0x80080 /* raw ntlmssp with ntlmv2 */
 
 #define   CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
 #define   CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
-#define   CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
+#define   CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5 | CIFSSEC_MAY_NTLMSSP)
 /*
  *****************************************************************
  * All constants go here
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4e10efd2432..75e6623a863 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -449,6 +449,14 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 		cFYI(1, ("Kerberos only mechanism, enable extended security"));
 		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
 	}
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+	else if ((secFlags & CIFSSEC_MUST_NTLMSSP) == CIFSSEC_MUST_NTLMSSP)
+		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+	else if ((secFlags & CIFSSEC_AUTH_MASK) == CIFSSEC_MAY_NTLMSSP) {
+		cFYI(1, ("NTLMSSP only mechanism, enable extended security"));
+		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+	}
+#endif
 
 	count = 0;
 	for (i = 0; i < CIFS_NUM_PROT; i++) {
@@ -585,6 +593,8 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 		server->secType = NTLMv2;
 	else if (secFlags & CIFSSEC_MAY_KRB5)
 		server->secType = Kerberos;
+	else if (secFlags & CIFSSEC_MAY_NTLMSSP)
+		server->secType = NTLMSSP;
 	else if (secFlags & CIFSSEC_MAY_LANMAN)
 		server->secType = LANMAN;
 /* #ifdef CONFIG_CIFS_EXPERIMENTAL
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 3a934dd8422..4aa81a507b7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -979,6 +979,13 @@ cifs_parse_mount_options(char *options, const char *devname,
 				return 1;
 			} else if (strnicmp(value, "krb5", 4) == 0) {
 				vol->secFlg |= CIFSSEC_MAY_KRB5;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+			} else if (strnicmp(value, "ntlmsspi", 8) == 0) {
+				vol->secFlg |= CIFSSEC_MAY_NTLMSSP |
+					CIFSSEC_MUST_SIGN;
+			} else if (strnicmp(value, "ntlmssp", 7) == 0) {
+				vol->secFlg |= CIFSSEC_MAY_NTLMSSP;
+#endif
 			} else if (strnicmp(value, "ntlmv2i", 7) == 0) {
 				vol->secFlg |= CIFSSEC_MAY_NTLMV2 |
 					CIFSSEC_MUST_SIGN;
-- 
GitLab


From 7eccf7b227b6d3b1745b937ce35efc9c27f9b0e5 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Tue, 5 May 2009 12:50:02 -0700
Subject: [PATCH 1154/1421] x86, srat: do not register nodes beyond e820 map

The mem= option will truncate the memory map at a specified address so
it's not possible to register nodes with memory beyond the e820 upper
bound.

unparse_node() is only called when then node had memory associated with
it, although with the mem= option it is no longer addressable.

[ Impact: fix boot hang on certain (large) systems ]

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <alpine.DEB.2.00.0905051248150.20021@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_64.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 33c5fa57e43..01765955baa 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -361,6 +361,7 @@ static void __init unparse_node(int node)
 {
 	int i;
 	node_clear(node, nodes_parsed);
+	node_clear(node, cpu_nodes_parsed);
 	for (i = 0; i < MAX_LOCAL_APIC; i++) {
 		if (apicid_to_node[i] == node)
 			apicid_to_node[i] = NUMA_NO_NODE;
-- 
GitLab


From e0e5ea3268db428d19e1c5fa00e6f583861cbdbd Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Mon, 4 May 2009 09:08:26 +0530
Subject: [PATCH 1155/1421] x86: Fix a typo in a printk message

[ Impact: printk message cleanup ]

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200905040908.27299.knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 16ae70fc57e..29a0e37114f 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -216,7 +216,7 @@ int __init get_memcfg_from_srat(void)
 
 	if (num_memory_chunks == 0) {
 		printk(KERN_WARNING
-			 "could not finy any ACPI SRAT memory areas.\n");
+			 "could not find any ACPI SRAT memory areas.\n");
 		goto out_fail;
 	}
 
-- 
GitLab


From 35edb4003c9589c49602e29cee1e78d820a1388f Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Wed, 6 May 2009 09:06:04 +0200
Subject: [PATCH 1156/1421] ALSA: Release v1.0.20

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 include/sound/version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/sound/version.h b/include/sound/version.h
index a7e74e23ad2..456f1359e1c 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
 /* include/version.h */
-#define CONFIG_SND_VERSION "1.0.19"
+#define CONFIG_SND_VERSION "1.0.20"
 #define CONFIG_SND_DATE ""
-- 
GitLab


From b2c0cea6b1cb210e962f07047df602875564069e Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Tue, 5 May 2009 19:04:29 -0400
Subject: [PATCH 1157/1421] nfsd4: check for negative dentry before use in
 nfsv4 readdir

After 2f9092e1020246168b1309b35e085ecd7ff9ff72 "Fix i_mutex vs.  readdir
handling in nfsd" (and 14f7dd63 "Copy XFS readdir hack into nfsd code"),
an entry may be removed between the first mutex_unlock and the second
mutex_lock. In this case, lookup_one_len() will return a negative
dentry.  Check for this case to avoid a NULL dereference.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Cc: stable@kernel.org
---
 fs/nfsd/nfs4xdr.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index b820c311931..b73549d293b 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2214,6 +2214,15 @@ nfsd4_encode_dirent_fattr(struct nfsd4_readdir *cd,
 	dentry = lookup_one_len(name, cd->rd_fhp->fh_dentry, namlen);
 	if (IS_ERR(dentry))
 		return nfserrno(PTR_ERR(dentry));
+	if (!dentry->d_inode) {
+		/*
+		 * nfsd_buffered_readdir drops the i_mutex between
+		 * readdir and calling this callback, leaving a window
+		 * where this directory entry could have gone away.
+		 */
+		dput(dentry);
+		return nfserr_noent;
+	}
 
 	exp_get(exp);
 	/*
@@ -2276,6 +2285,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 	struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);
 	int buflen;
 	__be32 *p = cd->buffer;
+	__be32 *cookiep;
 	__be32 nfserr = nfserr_toosmall;
 
 	/* In nfsv4, "." and ".." never make it onto the wire.. */
@@ -2292,7 +2302,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 		goto fail;
 
 	*p++ = xdr_one;                             /* mark entry present */
-	cd->offset = p;                             /* remember pointer */
+	cookiep = p;
 	p = xdr_encode_hyper(p, NFS_OFFSET_MAX);    /* offset of next entry */
 	p = xdr_encode_array(p, name, namlen);      /* name length & name */
 
@@ -2306,6 +2316,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 		goto fail;
 	case nfserr_dropit:
 		goto fail;
+	case nfserr_noent:
+		goto skip_entry;
 	default:
 		/*
 		 * If the client requested the RDATTR_ERROR attribute,
@@ -2324,6 +2336,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 	}
 	cd->buflen -= (p - cd->buffer);
 	cd->buffer = p;
+	cd->offset = cookiep;
+skip_entry:
 	cd->common.err = nfs_ok;
 	return 0;
 fail:
-- 
GitLab


From 89996df4b5b1a09c279f50b3fd03aa9df735f5cb Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Wed, 6 May 2009 16:32:54 -0400
Subject: [PATCH 1158/1421] lockd: fix list corruption on lockd restart

If lockd is signalled soon enough after restart then locks_start_grace()
will try to re-add an entry to a list and trigger a lock corruption
warning.

Thanks to Wang Chen for the problem report and diagnosis.

WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c()
...
list_add corruption. next->prev should be prev (ef8fe958), but was ef8ff128.  (next=ef8ff128).
...
Pid: 23062, comm: lockd Tainted: G        W  2.6.30-rc2 #3
Call Trace:
[<c042d5b5>] warn_slowpath+0x71/0xa0
[<c0422a96>] ? update_curr+0x11d/0x125
[<c044b12d>] ? trace_hardirqs_on_caller+0x18/0x150
[<c044b270>] ? trace_hardirqs_on+0xb/0xd
[<c051c61a>] ? _raw_spin_lock+0x53/0xfa
[<c051c89f>] __list_add+0x27/0x5c
[<ef8f6daa>] locks_start_grace+0x22/0x30 [lockd]
[<ef8f34da>] set_grace_period+0x39/0x53 [lockd]
[<c06b8921>] ? lock_kernel+0x1c/0x28
[<ef8f3558>] lockd+0x64/0x164 [lockd]
[<c044b12d>] ? trace_hardirqs_on_caller+0x18/0x150
[<c04227b0>] ? complete+0x34/0x3e
[<ef8f34f4>] ? lockd+0x0/0x164 [lockd]
[<ef8f34f4>] ? lockd+0x0/0x164 [lockd]
[<c043dd42>] kthread+0x45/0x6b
[<c043dcfd>] ? kthread+0x0/0x6b
[<c0403c23>] kernel_thread_helper+0x7/0x10

Reported-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: stable@kernel.org
---
 fs/lockd/svc.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index abf83881f68..1a54ae14a19 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -104,6 +104,16 @@ static void set_grace_period(void)
 	schedule_delayed_work(&grace_period_end, grace_period);
 }
 
+static void restart_grace(void)
+{
+	if (nlmsvc_ops) {
+		cancel_delayed_work_sync(&grace_period_end);
+		locks_end_grace(&lockd_manager);
+		nlmsvc_invalidate_all();
+		set_grace_period();
+	}
+}
+
 /*
  * This is the lockd kernel thread
  */
@@ -149,10 +159,7 @@ lockd(void *vrqstp)
 
 		if (signalled()) {
 			flush_signals(current);
-			if (nlmsvc_ops) {
-				nlmsvc_invalidate_all();
-				set_grace_period();
-			}
+			restart_grace();
 			continue;
 		}
 
-- 
GitLab


From fab892232e275e4e9351a50d018c0a9513155814 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 6 May 2009 17:17:26 +0100
Subject: [PATCH 1159/1421] vt: Add a note on the historical abuse of
 CLOCK_TICK_RATE

This is one area where we can't just magic away the bizarre use of
CLOCK_TICK_RATE as it leaks to user space APIs. It also means the visible
CLOCK_TICK_RATE is frozen for architectures which is horrible.

We need to fix this somehow

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/vt_ioctl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index a2dee0eb6da..e6ce632a393 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -400,6 +400,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 	case KIOCSOUND:
 		if (!perm)
 			goto eperm;
+		/* FIXME: This is an old broken API but we need to keep it
+		   supported and somehow separate the historic advertised
+		   tick rate from any real one */
 		if (arg)
 			arg = CLOCK_TICK_RATE / arg;
 		kd_mksound(arg, 0);
@@ -417,6 +420,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		 */
 		ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
 		count = ticks ? (arg & 0xffff) : 0;
+		/* FIXME: This is an old broken API but we need to keep it
+		   supported and somehow separate the historic advertised
+		   tick rate from any real one */
 		if (count)
 			count = CLOCK_TICK_RATE / count;
 		kd_mksound(count, ticks);
-- 
GitLab


From fd1e6c1df5c396961509daac2b456852edf982df Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Wed, 6 May 2009 17:17:57 +0100
Subject: [PATCH 1160/1421] jsm: removing unused spinlock

This patch removes bd_lock spinlock (inside jsm_board structure).
The lock is initialized in the probe function and not used anymore.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/jsm/jsm.h        | 2 --
 drivers/serial/jsm/jsm_driver.c | 1 -
 2 files changed, 3 deletions(-)

diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 8871aaa3dba..c0a3e2734e2 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -130,8 +130,6 @@ struct jsm_board
 	struct pci_dev	*pci_dev;
 	u32		maxports;	/* MAX ports this board can handle */
 
-	spinlock_t	bd_lock;	/* Used to protect board */
-
 	spinlock_t	bd_intr_lock;	/* Used to protect the poller tasklet and
 					 * the interrupt routine from each other.
 					 */
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index d2d32a19862..b3604aa322a 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 	else
 		brd->maxports = 2;
 
-	spin_lock_init(&brd->bd_lock);
 	spin_lock_init(&brd->bd_intr_lock);
 
 	/* store which revision we have */
-- 
GitLab


From 381a80e6df396eaabef2c00f85974a4579ac1c70 Mon Sep 17 00:00:00 2001
From: Wu Fengguang <fengguang.wu@intel.com>
Date: Wed, 6 May 2009 16:02:50 -0700
Subject: [PATCH 1161/1421] inotify: use GFP_NOFS in kernel_event() to work
 around a lockdep false-positive

There is what we believe to be a false positive reported by lockdep.

inotify_inode_queue_event() => take inotify_mutex => kernel_event() =>
kmalloc() => SLOB => alloc_pages_node() => page reclaim => slab reclaim =>
dcache reclaim => inotify_inode_is_dead => take inotify_mutex => deadlock

The plan is to fix this via lockdep annotation, but that is proving to be
quite involved.

The patch flips the allocation over to GFP_NFS to shut the warning up, for
the 2.6.30 release.

Hopefully we will fix this for real in 2.6.31.  I'll queue a patch in -mm
to switch it back to GFP_KERNEL so we don't forget.

  =================================
  [ INFO: inconsistent lock state ]
  2.6.30-rc2-next-20090417 #203
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/380 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&inode->inotify_mutex){+.+.?.}, at: [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
  {RECLAIM_FS-ON-W} state was registered at:
    [<ffffffff81079188>] mark_held_locks+0x68/0x90
    [<ffffffff810792a5>] lockdep_trace_alloc+0xf5/0x100
    [<ffffffff810f5261>] __kmalloc_node+0x31/0x1e0
    [<ffffffff81130652>] kernel_event+0xe2/0x190
    [<ffffffff81130826>] inotify_dev_queue_event+0x126/0x230
    [<ffffffff8112f096>] inotify_inode_queue_event+0xc6/0x110
    [<ffffffff8110444d>] vfs_create+0xcd/0x140
    [<ffffffff8110825d>] do_filp_open+0x88d/0xa20
    [<ffffffff810f6b68>] do_sys_open+0x98/0x140
    [<ffffffff810f6c50>] sys_open+0x20/0x30
    [<ffffffff8100c272>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
  irq event stamp: 690455
  hardirqs last  enabled at (690455): [<ffffffff81564fe4>] _spin_unlock_irqrestore+0x44/0x80
  hardirqs last disabled at (690454): [<ffffffff81565372>] _spin_lock_irqsave+0x32/0xa0
  softirqs last  enabled at (690178): [<ffffffff81052282>] __do_softirq+0x202/0x220
  softirqs last disabled at (690157): [<ffffffff8100d50c>] call_softirq+0x1c/0x50

  other info that might help us debug this:
  2 locks held by kswapd0/380:
   #0:  (shrinker_rwsem){++++..}, at: [<ffffffff810d0bd7>] shrink_slab+0x37/0x180
   #1:  (&type->s_umount_key#17){++++..}, at: [<ffffffff8110cfbf>] shrink_dcache_memory+0x11f/0x1e0

  stack backtrace:
  Pid: 380, comm: kswapd0 Not tainted 2.6.30-rc2-next-20090417 #203
  Call Trace:
   [<ffffffff810789ef>] print_usage_bug+0x19f/0x200
   [<ffffffff81018bff>] ? save_stack_trace+0x2f/0x50
   [<ffffffff81078f0b>] mark_lock+0x4bb/0x6d0
   [<ffffffff810799e0>] ? check_usage_forwards+0x0/0xc0
   [<ffffffff8107b142>] __lock_acquire+0xc62/0x1ae0
   [<ffffffff810f478c>] ? slob_free+0x10c/0x370
   [<ffffffff8107c0a1>] lock_acquire+0xe1/0x120
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff81562d43>] mutex_lock_nested+0x63/0x420
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff81012fe9>] ? sched_clock+0x9/0x10
   [<ffffffff81077165>] ? lock_release_holdtime+0x35/0x1c0
   [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
   [<ffffffff8110c9dc>] dentry_iput+0xbc/0xe0
   [<ffffffff8110cb23>] d_kill+0x33/0x60
   [<ffffffff8110ce23>] __shrink_dcache_sb+0x2d3/0x350
   [<ffffffff8110cffa>] shrink_dcache_memory+0x15a/0x1e0
   [<ffffffff810d0cc5>] shrink_slab+0x125/0x180
   [<ffffffff810d1540>] kswapd+0x560/0x7a0
   [<ffffffff810ce160>] ? isolate_pages_global+0x0/0x2c0
   [<ffffffff81065a30>] ? autoremove_wake_function+0x0/0x40
   [<ffffffff8107953d>] ? trace_hardirqs_on+0xd/0x10
   [<ffffffff810d0fe0>] ? kswapd+0x0/0x7a0
   [<ffffffff8106555b>] kthread+0x5b/0xa0
   [<ffffffff8100d40a>] child_rip+0xa/0x20
   [<ffffffff8100cdd0>] ? restore_args+0x0/0x30
   [<ffffffff81065500>] ? kthread+0x0/0xa0
   [<ffffffff8100d400>] ? child_rip+0x0/0x20

[eparis@redhat.com: fix audit too]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/notify/inotify/inotify_user.c | 2 +-
 kernel/auditfilter.c             | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index bed766e435b..1634319e240 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -220,7 +220,7 @@ static struct inotify_kernel_event * kernel_event(s32 wd, u32 mask, u32 cookie,
 				rem = 0;
 		}
 
-		kevent->name = kmalloc(len + rem, GFP_KERNEL);
+		kevent->name = kmalloc(len + rem, GFP_NOFS);
 		if (unlikely(!kevent->name)) {
 			kmem_cache_free(event_cachep, kevent);
 			return NULL;
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index a6fe71fd5d1..713098ee5a0 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1028,7 +1028,7 @@ static void audit_update_watch(struct audit_parent *parent,
 
 		if (audit_enabled) {
 			struct audit_buffer *ab;
-			ab = audit_log_start(NULL, GFP_KERNEL,
+			ab = audit_log_start(NULL, GFP_NOFS,
 				AUDIT_CONFIG_CHANGE);
 			audit_log_format(ab, "auid=%u ses=%u",
 				audit_get_loginuid(current),
@@ -1067,7 +1067,7 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
 			e = container_of(r, struct audit_entry, rule);
 			if (audit_enabled) {
 				struct audit_buffer *ab;
-				ab = audit_log_start(NULL, GFP_KERNEL,
+				ab = audit_log_start(NULL, GFP_NOFS,
 					AUDIT_CONFIG_CHANGE);
 				audit_log_format(ab, "auid=%u ses=%u",
 					audit_get_loginuid(current),
-- 
GitLab


From 429aa0fca0df702fc9c81d799175a7d920398827 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 6 May 2009 16:02:51 -0700
Subject: [PATCH 1162/1421] doc: hashdist defaults on for 64bit

kernel boot parameter `hashdist' now defaults on for all 64bit NUMA.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 90b3924071b..52f5ce4ca8b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -775,7 +775,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
-			for IA-64, off otherwise.
+			for 64bit NUMA, off otherwise.
 			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer
-- 
GitLab


From 57adc4d2dbf968fdbe516359688094eef4d46581 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Wed, 6 May 2009 16:02:53 -0700
Subject: [PATCH 1163/1421] Eliminate thousands of warnings with gcc 3.2 build

When building with gcc 3.2 I get thousands of warnings such as

include/linux/gfp.h: In function `allocflags_to_migratetype':
include/linux/gfp.h:105: warning: null format string

due to passing a NULL format string to warn_slowpath() in

#define __WARN()		warn_slowpath(__FILE__, __LINE__, NULL)

Split this case out into a separate call.  This also shrinks the kernel
slightly:

          text    data     bss     dec     hex filename
       4802274  707668  712704 6222646  5ef336 vmlinux
          text    data     bss     dec     hex filename
       4799027  703572  712704 6215303  5ed687 vmlinux

due to removeing one argument from the commonly-called __WARN().

[akpm@linux-foundation.org: reduce scope of `empty']
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/bug.h |  7 ++++---
 kernel/panic.c            | 13 ++++++++++---
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index e727fe0d145..4b6755984d2 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -58,12 +58,13 @@ struct bug_entry {
  */
 #ifndef __WARN
 #ifndef __ASSEMBLY__
-extern void warn_slowpath(const char *file, const int line,
+extern void warn_slowpath_fmt(const char *file, const int line,
 		const char *fmt, ...) __attribute__((format(printf, 3, 4)));
+extern void warn_slowpath_null(const char *file, const int line);
 #define WANT_WARN_ON_SLOWPATH
 #endif
-#define __WARN()		warn_slowpath(__FILE__, __LINE__, NULL)
-#define __WARN_printf(arg...)	warn_slowpath(__FILE__, __LINE__, arg)
+#define __WARN()		warn_slowpath_null(__FILE__, __LINE__)
+#define __WARN_printf(arg...)	warn_slowpath_fmt(__FILE__, __LINE__, arg)
 #else
 #define __WARN_printf(arg...)	do { printk(arg); __WARN(); } while (0)
 #endif
diff --git a/kernel/panic.c b/kernel/panic.c
index 3dcaa166135..874ecf1307a 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -340,7 +340,7 @@ void oops_exit(void)
 }
 
 #ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath(const char *file, int line, const char *fmt, ...)
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
 {
 	va_list args;
 	char function[KSYM_SYMBOL_LEN];
@@ -356,7 +356,7 @@ void warn_slowpath(const char *file, int line, const char *fmt, ...)
 	if (board)
 		printk(KERN_WARNING "Hardware name: %s\n", board);
 
-	if (fmt) {
+	if (*fmt) {
 		va_start(args, fmt);
 		vprintk(fmt, args);
 		va_end(args);
@@ -367,7 +367,14 @@ void warn_slowpath(const char *file, int line, const char *fmt, ...)
 	print_oops_end_marker();
 	add_taint(TAINT_WARN);
 }
-EXPORT_SYMBOL(warn_slowpath);
+EXPORT_SYMBOL(warn_slowpath_fmt);
+
+void warn_slowpath_null(const char *file, int line)
+{
+	static const char *empty = "";
+	warn_slowpath_fmt(file, line, empty);
+}
+EXPORT_SYMBOL(warn_slowpath_null);
 #endif
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-- 
GitLab


From df3935ffd6166fdd00702cf548fb5bb55737758b Mon Sep 17 00:00:00 2001
From: Josef Bacik <jbacik@redhat.com>
Date: Wed, 6 May 2009 16:02:53 -0700
Subject: [PATCH 1164/1421] fiemap: fix problem with setting FIEMAP_EXTENT_LAST

Fix a problem where the generic block based fiemap stuff would not
properly set FIEMAP_EXTENT_LAST on the last extent.  I've reworked things
to keep track if we go past the EOF, and mark the last extent properly.
The problem was reported by and tested by Eric Sandeen.

Tested-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-btrfs@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ioctl.c | 75 +++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 55 insertions(+), 20 deletions(-)

diff --git a/fs/ioctl.c b/fs/ioctl.c
index ac2d47e4392..82d9c42b8ba 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -258,7 +258,7 @@ int __generic_block_fiemap(struct inode *inode,
 	long long length = 0, map_len = 0;
 	u64 logical = 0, phys = 0, size = 0;
 	u32 flags = FIEMAP_EXTENT_MERGED;
-	int ret = 0;
+	int ret = 0, past_eof = 0, whole_file = 0;
 
 	if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
 		return ret;
@@ -266,6 +266,9 @@ int __generic_block_fiemap(struct inode *inode,
 	start_blk = logical_to_blk(inode, start);
 
 	length = (long long)min_t(u64, len, i_size_read(inode));
+	if (length < len)
+		whole_file = 1;
+
 	map_len = length;
 
 	do {
@@ -282,11 +285,26 @@ int __generic_block_fiemap(struct inode *inode,
 
 		/* HOLE */
 		if (!buffer_mapped(&tmp)) {
+			length -= blk_to_logical(inode, 1);
+			start_blk++;
+
+			/*
+			 * we want to handle the case where there is an
+			 * allocated block at the front of the file, and then
+			 * nothing but holes up to the end of the file properly,
+			 * to make sure that extent at the front gets properly
+			 * marked with FIEMAP_EXTENT_LAST
+			 */
+			if (!past_eof &&
+			    blk_to_logical(inode, start_blk) >=
+			    blk_to_logical(inode, 0)+i_size_read(inode))
+				past_eof = 1;
+
 			/*
 			 * first hole after going past the EOF, this is our
 			 * last extent
 			 */
-			if (length <= 0) {
+			if (past_eof && size) {
 				flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
 				ret = fiemap_fill_next_extent(fieinfo, logical,
 							      phys, size,
@@ -294,15 +312,37 @@ int __generic_block_fiemap(struct inode *inode,
 				break;
 			}
 
-			length -= blk_to_logical(inode, 1);
-
 			/* if we have holes up to/past EOF then we're done */
-			if (length <= 0)
+			if (length <= 0 || past_eof)
 				break;
-
-			start_blk++;
 		} else {
-			if (length <= 0 && size) {
+			/*
+			 * we have gone over the length of what we wanted to
+			 * map, and it wasn't the entire file, so add the extent
+			 * we got last time and exit.
+			 *
+			 * This is for the case where say we want to map all the
+			 * way up to the second to the last block in a file, but
+			 * the last block is a hole, making the second to last
+			 * block FIEMAP_EXTENT_LAST.  In this case we want to
+			 * see if there is a hole after the second to last block
+			 * so we can mark it properly.  If we found data after
+			 * we exceeded the length we were requesting, then we
+			 * are good to go, just add the extent to the fieinfo
+			 * and break
+			 */
+			if (length <= 0 && !whole_file) {
+				ret = fiemap_fill_next_extent(fieinfo, logical,
+							      phys, size,
+							      flags);
+				break;
+			}
+
+			/*
+			 * if size != 0 then we know we already have an extent
+			 * to add, so add it.
+			 */
+			if (size) {
 				ret = fiemap_fill_next_extent(fieinfo, logical,
 							      phys, size,
 							      flags);
@@ -319,19 +359,14 @@ int __generic_block_fiemap(struct inode *inode,
 			start_blk += logical_to_blk(inode, size);
 
 			/*
-			 * if we are past the EOF we need to loop again to see
-			 * if there is a hole so we can mark this extent as the
-			 * last one, and if not keep mapping things until we
-			 * find a hole, or we run out of slots in the extent
-			 * array
+			 * If we are past the EOF, then we need to make sure as
+			 * soon as we find a hole that the last extent we found
+			 * is marked with FIEMAP_EXTENT_LAST
 			 */
-			if (length <= 0)
-				continue;
-
-			ret = fiemap_fill_next_extent(fieinfo, logical, phys,
-						      size, flags);
-			if (ret)
-				break;
+			if (!past_eof &&
+			    logical+size >=
+			    blk_to_logical(inode, 0)+i_size_read(inode))
+				past_eof = 1;
 		}
 		cond_resched();
 	} while (1);
-- 
GitLab


From 184101bf143ac96d62b3dcc17e7b3550f98d3350 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Wed, 6 May 2009 16:02:55 -0700
Subject: [PATCH 1165/1421] oom: prevent livelock when oom_kill_allocating_task
 is set

When /proc/sys/vm/oom_kill_allocating_task is set for large systems that
want to avoid the lengthy tasklist scan, it's possible to livelock if
current is ineligible for oom kill.  This normally happens when it is set
to OOM_DISABLE, but is also possible if any threads are sharing the same
->mm with a different tgid.

So change __out_of_memory() to fall back to the full task-list scan if it
was unable to kill `current'.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/oom_kill.c | 44 +++++++++++++++++++++-----------------------
 1 file changed, 21 insertions(+), 23 deletions(-)

diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 2f3166e308d..92bcf1db16b 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -514,34 +514,32 @@ void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_mask)
  */
 static void __out_of_memory(gfp_t gfp_mask, int order)
 {
-	if (sysctl_oom_kill_allocating_task) {
-		oom_kill_process(current, gfp_mask, order, 0, NULL,
-				"Out of memory (oom_kill_allocating_task)");
-
-	} else {
-		unsigned long points;
-		struct task_struct *p;
-
-retry:
-		/*
-		 * Rambo mode: Shoot down a process and hope it solves whatever
-		 * issues we may have.
-		 */
-		p = select_bad_process(&points, NULL);
+	struct task_struct *p;
+	unsigned long points;
 
-		if (PTR_ERR(p) == -1UL)
+	if (sysctl_oom_kill_allocating_task)
+		if (!oom_kill_process(current, gfp_mask, order, 0, NULL,
+				"Out of memory (oom_kill_allocating_task)"))
 			return;
+retry:
+	/*
+	 * Rambo mode: Shoot down a process and hope it solves whatever
+	 * issues we may have.
+	 */
+	p = select_bad_process(&points, NULL);
 
-		/* Found nothing?!?! Either we hang forever, or we panic. */
-		if (!p) {
-			read_unlock(&tasklist_lock);
-			panic("Out of memory and no killable processes...\n");
-		}
+	if (PTR_ERR(p) == -1UL)
+		return;
 
-		if (oom_kill_process(p, gfp_mask, order, points, NULL,
-				     "Out of memory"))
-			goto retry;
+	/* Found nothing?!?! Either we hang forever, or we panic. */
+	if (!p) {
+		read_unlock(&tasklist_lock);
+		panic("Out of memory and no killable processes...\n");
 	}
+
+	if (oom_kill_process(p, gfp_mask, order, points, NULL,
+			     "Out of memory"))
+		goto retry;
 }
 
 /*
-- 
GitLab


From bdca0f9b1eabb24373e2307fe492f428f5928abc Mon Sep 17 00:00:00 2001
From: Michal Januszewski <spock@gentoo.org>
Date: Wed, 6 May 2009 16:02:56 -0700
Subject: [PATCH 1166/1421] fbdev: fix fillrect for 24bpp modes

The software fillrect routines do not work properly when the number of
pixels per machine word is not an integer.  To see that, run the following
command on a fbdev console with a 24bpp video mode, using a
non-accelerated driver such as (u)vesafb:

  reset ; echo -e '\e[41mtest\e[K'

The expected result is 'test' displayed on a line with red background.
Instead of that, 'test' has a red background, but the rest of the line
(rendered using fillrect()) contains a distored colorful pattern.

This patch fixes the problem by correctly computing rotation shifts.  It
has been tested in a 24bpp mode on 32- and 64-bit little-endian machines.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/cfbfillrect.c | 36 ++++++++++++++++--------------------
 drivers/video/fb_draw.h     | 21 +++++++++++++++++----
 drivers/video/sysfillrect.c | 30 +++++++++++++++---------------
 3 files changed, 48 insertions(+), 39 deletions(-)

diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c
index 64b35766b2a..ba9f58b2a5e 100644
--- a/drivers/video/cfbfillrect.c
+++ b/drivers/video/cfbfillrect.c
@@ -9,10 +9,6 @@
  *
  * NOTES:
  *
- *  The code for depths like 24 that don't have integer number of pixels per
- *  long is broken and needs to be fixed. For now I turned these types of
- *  mode off.
- *
  *  Also need to add code to deal with cards endians that are different than
  *  the native cpu endians. I also need to deal with MSB position in the word.
  *
@@ -139,7 +135,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
 
 		// Trailing bits
 		if (last)
-			FB_WRITEL(comp(pat, FB_READL(dst), first), dst);
+			FB_WRITEL(comp(pat, FB_READL(dst), last), dst);
 	}
 }
 
@@ -281,7 +277,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long __iomem *dst,
 
 void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 {
-	unsigned long pat, fg;
+	unsigned long pat, pat2, fg;
 	unsigned long width = rect->width, height = rect->height;
 	int bits = BITS_PER_LONG, bytes = bits >> 3;
 	u32 bpp = p->var.bits_per_pixel;
@@ -297,7 +293,7 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 	else
 		fg = rect->color;
 
-	pat = pixel_to_pat( bpp, fg);
+	pat = pixel_to_pat(bpp, fg);
 
 	dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
 	dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8;
@@ -333,17 +329,16 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 			dst_idx += p->fix.line_length*8;
 		}
 	} else {
-		int right;
-		int r;
-		int rot = (left-dst_idx) % bpp;
+		int right, r;
 		void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst,
 				int dst_idx, unsigned long pat, int left,
 				int right, unsigned n, int bits) = NULL;
-
-		/* rotate pattern to correct start position */
-		pat = pat << rot | pat >> (bpp-rot);
-
-		right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+		right = left;
+		left = bpp - right;
+#else
+		right = bpp - left;
+#endif
 		switch (rect->rop) {
 		case ROP_XOR:
 			fill_op = bitfill_unaligned_rev;
@@ -352,17 +347,18 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 			fill_op = bitfill_unaligned;
 			break;
 		default:
-			printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
+			printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
 			fill_op = bitfill_unaligned;
 			break;
 		}
 		while (height--) {
-			dst += dst_idx >> (ffs(bits) - 1);
+			dst += dst_idx / bits;
 			dst_idx &= (bits - 1);
-			fill_op(p, dst, dst_idx, pat, left, right,
+			r = dst_idx % bpp;
+			/* rotate pattern to the correct start position */
+			pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+			fill_op(p, dst, dst_idx, pat2, left, right,
 				width*bpp, bits);
-			r = (p->fix.line_length*8) % bpp;
-			pat = pat << (bpp-r) | pat >> r;
 			dst_idx += p->fix.line_length*8;
 		}
 	}
diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h
index 1db622192bd..04c01faaf77 100644
--- a/drivers/video/fb_draw.h
+++ b/drivers/video/fb_draw.h
@@ -33,11 +33,11 @@ pixel_to_pat( u32 bpp, u32 pixel)
 	case 8:
 		return 0x0101010101010101ul*pixel;
 	case 12:
-		return 0x0001001001001001ul*pixel;
+		return 0x1001001001001001ul*pixel;
 	case 16:
 		return 0x0001000100010001ul*pixel;
 	case 24:
-		return 0x0000000001000001ul*pixel;
+		return 0x0001000001000001ul*pixel;
 	case 32:
 		return 0x0000000100000001ul*pixel;
 	default:
@@ -58,11 +58,11 @@ pixel_to_pat( u32 bpp, u32 pixel)
 	case 8:
 		return 0x01010101ul*pixel;
 	case 12:
-		return 0x00001001ul*pixel;
+		return 0x01001001ul*pixel;
 	case 16:
 		return 0x00010001ul*pixel;
 	case 24:
-		return 0x00000001ul*pixel;
+		return 0x01000001ul*pixel;
 	case 32:
 		return 0x00000001ul*pixel;
 	default:
@@ -167,4 +167,17 @@ static inline unsigned long fb_rev_pixels_in_long(unsigned long val,
 
 #endif  /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */
 
+#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG)
+#define _cpu_to_le_long(x) __cpu_to_le_long(x)
+#define __cpu_to_le_long(x) cpu_to_le##x
+
+#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG)
+#define _le_long_to_cpu(x) __le_long_to_cpu(x)
+#define __le_long_to_cpu(x) le##x##_to_cpu
+
+static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x)
+{
+	return (word << shift) | (word >> (x - shift));
+}
+
 #endif /* FB_DRAW_H */
diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c
index f94d6b6e29e..33ee3d34f9d 100644
--- a/drivers/video/sysfillrect.c
+++ b/drivers/video/sysfillrect.c
@@ -124,7 +124,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long *dst, int dst_idx,
 
 		/* Trailing bits */
 		if (last)
-			*dst = comp(pat, *dst, first);
+			*dst = comp(pat, *dst, last);
 	}
 }
 
@@ -242,7 +242,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long *dst, int dst_idx,
 
 void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 {
-	unsigned long pat, fg;
+	unsigned long pat, pat2, fg;
 	unsigned long width = rect->width, height = rect->height;
 	int bits = BITS_PER_LONG, bytes = bits >> 3;
 	u32 bpp = p->var.bits_per_pixel;
@@ -292,17 +292,16 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 			dst_idx += p->fix.line_length*8;
 		}
 	} else {
-		int right;
-		int r;
-		int rot = (left-dst_idx) % bpp;
+		int right, r;
 		void (*fill_op)(struct fb_info *p, unsigned long *dst,
 				int dst_idx, unsigned long pat, int left,
 				int right, unsigned n, int bits) = NULL;
-
-		/* rotate pattern to correct start position */
-		pat = pat << rot | pat >> (bpp-rot);
-
-		right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+		right = left;
+		left = bpp - right;
+#else
+		right = bpp - left;
+#endif
 		switch (rect->rop) {
 		case ROP_XOR:
 			fill_op = bitfill_unaligned_rev;
@@ -311,18 +310,19 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
 			fill_op = bitfill_unaligned;
 			break;
 		default:
-			printk(KERN_ERR "cfb_fillrect(): unknown rop, "
+			printk(KERN_ERR "sys_fillrect(): unknown rop, "
 				"defaulting to ROP_COPY\n");
 			fill_op = bitfill_unaligned;
 			break;
 		}
 		while (height--) {
-			dst += dst_idx >> (ffs(bits) - 1);
+			dst += dst_idx / bits;
 			dst_idx &= (bits - 1);
-			fill_op(p, dst, dst_idx, pat, left, right,
+			r = dst_idx % bpp;
+			/* rotate pattern to the correct start position */
+			pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+			fill_op(p, dst, dst_idx, pat2, left, right,
 				width*bpp, bits);
-			r = (p->fix.line_length*8) % bpp;
-			pat = pat << (bpp-r) | pat >> r;
 			dst_idx += p->fix.line_length*8;
 		}
 	}
-- 
GitLab


From ca1eda2d75b855f434b1d5458534332ffad92d65 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 6 May 2009 16:02:58 -0700
Subject: [PATCH 1167/1421] doc: small kernel-parameters updates

Change last "i386" to X86-32 as is used throughout the rest of the file.
Change combination of X86-32,X86-64 to just X86, as is done throughout the
rest of the file.

Add a note that hyphens and underscores are equivalent in parameter names,
with examples.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Christopher Sylvain <chris.sylvain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 52f5ce4ca8b..e87bdbfbcc7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
 
 	usbcore.blinkenlights=1
 
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+	log_buf_len=1M print-fatal-signals=1
+can also be entered as
+	log-buf-len=1M print_fatal_signals=1
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter enables that.
 
-	enable_timer_pin_1 [i386,x86-64]
+	enable_timer_pin_1 [X86]
 			Enable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs
 			(in particular on some ATI chipsets).
-- 
GitLab


From 2498ce42d3a4d1a498f1df4884da960087547db7 Mon Sep 17 00:00:00 2001
From: Ralph Wuerthner <ralphw@linux.vnet.ibm.com>
Date: Wed, 6 May 2009 16:02:59 -0700
Subject: [PATCH 1168/1421] alloc_vmap_area: fix memory leak

If alloc_vmap_area() fails the allocated struct vmap_area has to be freed.

Signed-off-by: Ralph Wuerthner <ralphw@linux.vnet.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmalloc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index fab19876b4d..083716ea38c 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -402,6 +402,7 @@ overflow:
 			printk(KERN_WARNING
 				"vmap allocation for size %lu failed: "
 				"use vmalloc=<size> to increase size.\n", size);
+		kfree(va);
 		return ERR_PTR(-EBUSY);
 	}
 
-- 
GitLab


From 57226e7898076f864d6ce41ddeff4bbc772b950c Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 6 May 2009 16:03:00 -0700
Subject: [PATCH 1169/1421] fbdev: remove makefile reference to removed driver

The cyblafb driver is removed so remove its last trace in the makefile.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0dbd6c68d76..d8d0be5151e 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_FB_CT65550)          += chipsfb.o
 obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
 obj-$(CONFIG_FB_FM2)              += fm2fb.o
 obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
-obj-$(CONFIG_FB_CYBLA)            += cyblafb.o
 obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
 obj-$(CONFIG_FB_LE80578)          += vermilion/
 obj-$(CONFIG_FB_S3)               += s3fb.o
-- 
GitLab


From 74614f8d9d4141a3752fc1c38706859b63f4842b Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 6 May 2009 16:03:00 -0700
Subject: [PATCH 1170/1421] isl29003: fix resume functionality

The isl29003 does not interpret the return value of
i2c_smbus_write_byte_data() correctly and hence causes an error on system
resume.

Also introduce power_state_before_suspend and restore the chip's power
state upon wakeup.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/isl29003.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index 2e2a5923d4c..a71e245801e 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -64,6 +64,7 @@ struct isl29003_data {
 	struct i2c_client *client;
 	struct mutex lock;
 	u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
+	u8 power_state_before_suspend;
 };
 
 static int gain_range[] = {
@@ -411,6 +412,9 @@ static int __devexit isl29003_remove(struct i2c_client *client)
 #ifdef CONFIG_PM
 static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg)
 {
+	struct isl29003_data *data = i2c_get_clientdata(client);
+
+	data->power_state_before_suspend = isl29003_get_power_state(client);
 	return isl29003_set_power_state(client, 0);
 }
 
@@ -421,10 +425,11 @@ static int isl29003_resume(struct i2c_client *client)
 
 	/* restore registers from cache */
 	for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
-		if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
+		if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
 			return -EIO;
 
-	return 0;
+	return isl29003_set_power_state(client,
+		data->power_state_before_suspend);
 }
 
 #else
-- 
GitLab


From 9155203a5de94278525647b16733f0c315f3b786 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 6 May 2009 16:03:02 -0700
Subject: [PATCH 1171/1421] mm: use roundown_pow_of_two() in zone_batchsize()

Use roundown_pow_of_two(N) in zone_batchsize() rather than (1 <<
(fls(N)-1)) as they are equivalent, and with the former it is easier to
see what is going on.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Lanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e2f26991fff..8add7daf98b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2706,7 +2706,7 @@ static int zone_batchsize(struct zone *zone)
 	 * of pages of one half of the possible page colors
 	 * and the other with pages of the other colors.
 	 */
-	batch = (1 << (fls(batch + batch/2)-1)) - 1;
+	batch = rounddown_pow_of_two(batch + batch/2) - 1;
 
 	return batch;
 }
-- 
GitLab


From 3a6be87fd1e5cdbbc3b6a14d02a3efa9ecba1d3f Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 6 May 2009 16:03:03 -0700
Subject: [PATCH 1172/1421] nommu: clamp zone_batchsize() to 0 under NOMMU
 conditions

Clamp zone_batchsize() to 0 under NOMMU conditions to stop
free_hot_cold_page() from queueing and batching frees.

The problem is that under NOMMU conditions it is really important to be
able to allocate large contiguous chunks of memory, but when munmap() or
exit_mmap() releases big stretches of memory, return of these to the buddy
allocator can be deferred, and when it does finally happen, it can be in
small chunks.

Whilst the fragmentation this incurs isn't so much of a problem under MMU
conditions as userspace VM is glued together from individual pages with
the aid of the MMU, it is a real problem if there isn't an MMU.

By clamping the page freeing queue size to 0, pages are returned to the
allocator immediately, and the buddy detector is more likely to be able to
glue them together into large chunks immediately, and fragmentation is
less likely to occur.

By disabling batching of frees, and by turning off the trimming of excess
space during boot, Coldfire can manage to boot.

Reported-by: Lanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Lanttor Guo <lanttor.guo@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8add7daf98b..fe753ecf2aa 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2681,6 +2681,7 @@ static void __meminit zone_init_free_lists(struct zone *zone)
 
 static int zone_batchsize(struct zone *zone)
 {
+#ifdef CONFIG_MMU
 	int batch;
 
 	/*
@@ -2709,6 +2710,23 @@ static int zone_batchsize(struct zone *zone)
 	batch = rounddown_pow_of_two(batch + batch/2) - 1;
 
 	return batch;
+
+#else
+	/* The deferral and batching of frees should be suppressed under NOMMU
+	 * conditions.
+	 *
+	 * The problem is that NOMMU needs to be able to allocate large chunks
+	 * of contiguous memory as there's no hardware page translation to
+	 * assemble apparent contiguous memory from discontiguous pages.
+	 *
+	 * Queueing large contiguous runs of pages for batching, however,
+	 * causes the pages to actually be freed in smaller chunks.  As there
+	 * can be a significant delay between the individual batches being
+	 * recycled, this leads to the once large chunks of space being
+	 * fragmented and becoming unavailable for high-order allocations.
+	 */
+	return 0;
+#endif
 }
 
 static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
-- 
GitLab


From fc4d5c292b68ef02514d2072dcbf82d090c34875 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 6 May 2009 16:03:05 -0700
Subject: [PATCH 1173/1421] nommu: make the initial mmap allocation excess
 behaviour Kconfig configurable

NOMMU mmap() has an option controlled by a sysctl variable that determines
whether the allocations made by do_mmap_private() should have the excess
space trimmed off and returned to the allocator.  Make the initial setting
of this variable a Kconfig configuration option.

The reason there can be excess space is that the allocator only allocates
in power-of-2 size chunks, but mmap()'s can be made in sizes that aren't a
power of 2.

There are two alternatives:

 (1) Keep the excess as dead space.  The dead space then remains unused for the
     lifetime of the mapping.  Mappings of shared objects such as libc, ld.so
     or busybox's text segment may retain their dead space forever.

 (2) Return the excess to the allocator.  This means that the dead space is
     limited to less than a page per mapping, but it means that for a transient
     process, there's more chance of fragmentation as the excess space may be
     reused fairly quickly.

During the boot process, a lot of transient processes are created, and
this can cause a lot of fragmentation as the pagecache and various slabs
grow greatly during this time.

By turning off the trimming of excess space during boot and disabling
batching of frees, Coldfire can manage to boot.

A better way of doing things might be to have /sbin/init turn this option
off.  By that point libc, ld.so and init - which are all long-duration
processes - have all been loaded and trimmed.

Reported-by: Lanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Lanttor Guo <lanttor.guo@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/Kconfig | 28 ++++++++++++++++++++++++++++
 mm/nommu.c |  2 +-
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/mm/Kconfig b/mm/Kconfig
index 57971d2ab84..c2b57d81e15 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -225,3 +225,31 @@ config HAVE_MLOCKED_PAGE_BIT
 
 config MMU_NOTIFIER
 	bool
+
+config NOMMU_INITIAL_TRIM_EXCESS
+	int "Turn on mmap() excess space trimming before booting"
+	depends on !MMU
+	default 1
+	help
+	  The NOMMU mmap() frequently needs to allocate large contiguous chunks
+	  of memory on which to store mappings, but it can only ask the system
+	  allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
+	  more than it requires.  To deal with this, mmap() is able to trim off
+	  the excess and return it to the allocator.
+
+	  If trimming is enabled, the excess is trimmed off and returned to the
+	  system allocator, which can cause extra fragmentation, particularly
+	  if there are a lot of transient processes.
+
+	  If trimming is disabled, the excess is kept, but not used, which for
+	  long-term mappings means that the space is wasted.
+
+	  Trimming can be dynamically controlled through a sysctl option
+	  (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
+	  excess pages there must be before trimming should occur, or zero if
+	  no trimming is to occur.
+
+	  This option specifies the initial value of this option.  The default
+	  of 1 says that all excess pages should be trimmed.
+
+	  See Documentation/nommu-mmap.txt for more information.
diff --git a/mm/nommu.c b/mm/nommu.c
index 809998aa7b5..67cd1a487ee 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -66,7 +66,7 @@ struct percpu_counter vm_committed_as;
 int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
 int sysctl_overcommit_ratio = 50; /* default is 50% */
 int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
-int sysctl_nr_trim_pages = 1; /* page trimming behaviour */
+int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
 int heap_stack_gap = 0;
 
 atomic_long_t mmap_pages_allocated;
-- 
GitLab


From a1e6b6c1a676d25acdf079ee8ab5cdfeb5e5b835 Mon Sep 17 00:00:00 2001
From: Eric Piel <eric.piel@tremplin-utc.net>
Date: Wed, 6 May 2009 16:03:06 -0700
Subject: [PATCH 1174/1421] initramfs: clean up messages related to initramfs
 unpacking

With the removal of duplicate unpack_to_rootfs() (commit
df52092f3c97788592ef72501a43fb7ac6a3cfe0) the messages displayed do not
actually correspond to what the kernel is doing.  In addition, depending
if ramdisks are supported or not, the messages are not at all the same.

So keep the messages more in sync with what is really doing the kernel,
and only display a second message in case of failure.  This also ensure
that the printk message cannot be split by other printk's.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/initramfs.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/init/initramfs.c b/init/initramfs.c
index 9ee7b781041..4c00edc5968 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -574,11 +574,10 @@ static int __init populate_rootfs(void)
 	if (initrd_start) {
 #ifdef CONFIG_BLK_DEV_RAM
 		int fd;
-		printk(KERN_INFO "checking if image is initramfs...\n");
+		printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
 		err = unpack_to_rootfs((char *)initrd_start,
 			initrd_end - initrd_start);
 		if (!err) {
-			printk(KERN_INFO "rootfs image is initramfs; unpacking...\n");
 			free_initrd();
 			return 0;
 		} else {
@@ -596,15 +595,11 @@ static int __init populate_rootfs(void)
 			free_initrd();
 		}
 #else
-		printk(KERN_INFO "Unpacking initramfs...");
+		printk(KERN_INFO "Unpacking initramfs...\n");
 		err = unpack_to_rootfs((char *)initrd_start,
 			initrd_end - initrd_start);
-		if (err) {
-			printk(" failed!\n");
-			printk(KERN_EMERG "%s\n", err);
-		} else {
-			printk(" done\n");
-		}
+		if (err)
+			printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
 		free_initrd();
 #endif
 	}
-- 
GitLab


From 60db402780ec257b287de591d65157575952bb4a Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 6 May 2009 16:03:07 -0700
Subject: [PATCH 1175/1421] drivers/base/iommu.c: add missing includes

Fix zillions of -mm x86_64 allmodconfig build errors - the file uses
EXPORT_SYMBOL() and kmalloc but misses the needed includes.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/base/iommu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/base/iommu.c b/drivers/base/iommu.c
index 9f0e672f4be..8ad4ffea692 100644
--- a/drivers/base/iommu.c
+++ b/drivers/base/iommu.c
@@ -18,6 +18,8 @@
 
 #include <linux/bug.h>
 #include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/iommu.h>
 
-- 
GitLab


From b74fd2826c5acce20e6f691437b2d19372bc2057 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 7 May 2009 12:47:19 +1000
Subject: [PATCH 1176/1421] md: fix loading of out-of-date bitmap.

When md is loading a bitmap which it knows is out of date, it fills
each page with 1s and writes it back out again.  However the
write_page call makes used of bitmap->file_pages and
bitmap->last_page_size which haven't been set correctly yet.  So this
can sometimes fail.

Move the setting of file_pages and last_page_size to before the call
to write_page.

This bug can cause the assembly on an array to fail, thus making the
data inaccessible.  Hence I think it is a suitable candidate for
-stable.

Cc: stable@kernel.org
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/bitmap.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 1fb91edc7de..bc1d64b7b63 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -986,6 +986,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
 			oldindex = index;
 			oldpage = page;
 
+			bitmap->filemap[bitmap->file_pages++] = page;
+			bitmap->last_page_size = count;
+
 			if (outofdate) {
 				/*
 				 * if bitmap is out of date, dirty the
@@ -998,15 +1001,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
 				write_page(bitmap, page, 1);
 
 				ret = -EIO;
-				if (bitmap->flags & BITMAP_WRITE_ERROR) {
-					/* release, page not in filemap yet */
-					put_page(page);
+				if (bitmap->flags & BITMAP_WRITE_ERROR)
 					goto err;
-				}
 			}
-
-			bitmap->filemap[bitmap->file_pages++] = page;
-			bitmap->last_page_size = count;
 		}
 		paddr = kmap_atomic(page, KM_USER0);
 		if (bitmap->flags & BITMAP_HOSTENDIAN)
-- 
GitLab


From 18055569127253755d01733f6ecc004ed02f88d0 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 7 May 2009 12:48:10 +1000
Subject: [PATCH 1177/1421] md/raid10: don't clear bitmap during recovery if
 array will still be degraded.

If we have a raid10 with multiple missing devices, and we recover just
one of these to a spare, then we risk (depending on the bitmap and
array chunk size) clearing bits of the bitmap for which recovery isn't
complete (because a device is still missing).

This can lead to a subsequent "re-add" being recovered without
any IO happening, which would result in loss of data.

This patch takes the safe approach of not clearing bitmap bits
if the array will still be degraded.

This patch is suitable for all active -stable kernels.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/raid10.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 81a54f17417..499620afb44 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1809,17 +1809,17 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 				r10_bio->sector = sect;
 
 				raid10_find_phys(conf, r10_bio);
-				/* Need to check if this section will still be
+
+				/* Need to check if the array will still be
 				 * degraded
 				 */
-				for (j=0; j<conf->copies;j++) {
-					int d = r10_bio->devs[j].devnum;
-					if (conf->mirrors[d].rdev == NULL ||
-					    test_bit(Faulty, &conf->mirrors[d].rdev->flags)) {
+				for (j=0; j<conf->raid_disks; j++)
+					if (conf->mirrors[j].rdev == NULL ||
+					    test_bit(Faulty, &conf->mirrors[j].rdev->flags)) {
 						still_degraded = 1;
 						break;
 					}
-				}
+
 				must_sync = bitmap_start_sync(mddev->bitmap, sect,
 							      &sync_blocks, still_degraded);
 
-- 
GitLab


From db305e507d554430a69ede901a6308e6ecb72349 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 7 May 2009 12:49:06 +1000
Subject: [PATCH 1178/1421] md: fix some (more) errors with bitmaps on devices
 larger than 2TB.

If a write intent bitmap covers more than 2TB, we sometimes work with
values beyond 32bit, so these need to be sector_t.  This patches
add the required casts to some unsigned longs that are being shifted
up.

This will affect any raid10 larger than 2TB, or any raid1/4/5/6 with
member devices that are larger than 2TB.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Cc: stable@kernel.org
---
 drivers/md/bitmap.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index bc1d64b7b63..47c68bc75a1 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1013,9 +1013,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
 		kunmap_atomic(paddr, KM_USER0);
 		if (b) {
 			/* if the disk bit is set, set the memory bit */
-			bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap),
-					       ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start)
-				);
+			int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap))
+				      >= start);
+			bitmap_set_memory_bits(bitmap,
+					       (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+					       needed);
 			bit_cnt++;
 			set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
 		}
@@ -1151,8 +1153,9 @@ void bitmap_daemon_work(struct bitmap *bitmap)
 			spin_lock_irqsave(&bitmap->lock, flags);
 			clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
 		}
-		bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
-					&blocks, 0);
+		bmc = bitmap_get_counter(bitmap,
+					 (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
+					 &blocks, 0);
 		if (bmc) {
 /*
   if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
@@ -1166,7 +1169,8 @@ void bitmap_daemon_work(struct bitmap *bitmap)
 			} else if (*bmc == 1) {
 				/* we can clear the bit */
 				*bmc = 0;
-				bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
+				bitmap_count_page(bitmap,
+						  (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
 						  -1);
 
 				/* clear the bit */
@@ -1511,7 +1515,7 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e)
 	unsigned long chunk;
 
 	for (chunk = s; chunk <= e; chunk++) {
-		sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap);
+		sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap);
 		bitmap_set_memory_bits(bitmap, sec, 1);
 		bitmap_file_set_bit(bitmap, sec);
 	}
-- 
GitLab


From dd71cf6b2773310b01c6fe6c773064c80fd2476b Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 7 May 2009 12:49:35 +1000
Subject: [PATCH 1179/1421] md: tidy up status_resync to handle large arrays.

Two problems in status_resync.
1/ It still used Kilobytes as the basic block unit, while most code
   now uses sectors uniformly.
2/ It doesn't allow for the possibility that max_sectors exceeds
   the range of "unsigned long".

So
 - change "max_blocks" to "max_sectors", and store sector numbers
   in there and in 'resync'
 - Make 'rt' a 'sector_t' so it can temporarily hold the number of
   remaining sectors.
 - use sector_div rather than normal division.
 - change the magic '100' used to preserve precision to '32'.
   + making it a power of 2 makes division easier
   + it doesn't need to be as large as it was chosen when we averaged
     speed over the entire run.  Now we average speed over the last 30
     seconds or so.

Reported-by: "Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 45 ++++++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 17 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 612343fdde9..5eb01a4d27b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5705,37 +5705,38 @@ static void status_unused(struct seq_file *seq)
 
 static void status_resync(struct seq_file *seq, mddev_t * mddev)
 {
-	sector_t max_blocks, resync, res;
-	unsigned long dt, db, rt;
+	sector_t max_sectors, resync, res;
+	unsigned long dt, db;
+	sector_t rt;
 	int scale;
 	unsigned int per_milli;
 
-	resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2;
+	resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
 
 	if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
-		max_blocks = mddev->resync_max_sectors >> 1;
+		max_sectors = mddev->resync_max_sectors;
 	else
-		max_blocks = mddev->dev_sectors / 2;
+		max_sectors = mddev->dev_sectors;
 
 	/*
 	 * Should not happen.
 	 */
-	if (!max_blocks) {
+	if (!max_sectors) {
 		MD_BUG();
 		return;
 	}
 	/* Pick 'scale' such that (resync>>scale)*1000 will fit
-	 * in a sector_t, and (max_blocks>>scale) will fit in a
+	 * in a sector_t, and (max_sectors>>scale) will fit in a
 	 * u32, as those are the requirements for sector_div.
 	 * Thus 'scale' must be at least 10
 	 */
 	scale = 10;
 	if (sizeof(sector_t) > sizeof(unsigned long)) {
-		while ( max_blocks/2 > (1ULL<<(scale+32)))
+		while ( max_sectors/2 > (1ULL<<(scale+32)))
 			scale++;
 	}
 	res = (resync>>scale)*1000;
-	sector_div(res, (u32)((max_blocks>>scale)+1));
+	sector_div(res, (u32)((max_sectors>>scale)+1));
 
 	per_milli = res;
 	{
@@ -5756,25 +5757,35 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev)
 		     (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ?
 		      "resync" : "recovery"))),
 		   per_milli/10, per_milli % 10,
-		   (unsigned long long) resync,
-		   (unsigned long long) max_blocks);
+		   (unsigned long long) resync/2,
+		   (unsigned long long) max_sectors/2);
 
 	/*
-	 * We do not want to overflow, so the order of operands and
-	 * the * 100 / 100 trick are important. We do a +1 to be
-	 * safe against division by zero. We only estimate anyway.
-	 *
 	 * dt: time from mark until now
 	 * db: blocks written from mark until now
 	 * rt: remaining time
+	 *
+	 * rt is a sector_t, so could be 32bit or 64bit.
+	 * So we divide before multiply in case it is 32bit and close
+	 * to the limit.
+	 * We scale the divisor (db) by 32 to avoid loosing precision
+	 * near the end of resync when the number of remaining sectors
+	 * is close to 'db'.
+	 * We then divide rt by 32 after multiplying by db to compensate.
+	 * The '+1' avoids division by zero if db is very small.
 	 */
 	dt = ((jiffies - mddev->resync_mark) / HZ);
 	if (!dt) dt++;
 	db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
 		- mddev->resync_mark_cnt;
-	rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
 
-	seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
+	rt = max_sectors - resync;    /* number of remaining sectors */
+	sector_div(rt, db/32+1);
+	rt *= dt;
+	rt >>= 5;
+
+	seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60,
+		   ((unsigned long)rt % 60)/6);
 
 	seq_printf(seq, " speed=%ldK/sec", db/2/dt);
 }
-- 
GitLab


From 110518bccf076726cc93bf604527d8019aae50ba Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Thu, 7 May 2009 12:49:37 +1000
Subject: [PATCH 1180/1421] md: constify VFTs

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 5eb01a4d27b..8350bde60d1 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5976,7 +5976,7 @@ static int md_seq_show(struct seq_file *seq, void *v)
 	return 0;
 }
 
-static struct seq_operations md_seq_ops = {
+static const struct seq_operations md_seq_ops = {
 	.start  = md_seq_start,
 	.next   = md_seq_next,
 	.stop   = md_seq_stop,
-- 
GitLab


From 5bf295975416f8e97117bbbcfb0191c00bc3e2b4 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 7 May 2009 12:50:57 +1000
Subject: [PATCH 1181/1421] md: remove ability to explicit set an inactive
 array to 'clean'.

Being able to write 'clean' to an 'array_state' of an inactive array
to activate it in 'clean' mode is both unnecessary and inconvenient.

It is unnecessary because the same can be achieved by writing
'active'.  This activates and array, but it still remains 'clean'
until the first write.

It is inconvenient because writing 'clean' is more often used to
cause an 'active' array to revert to 'clean' mode (thus blocking
any writes until a 'write-pending' is promoted to 'active').

Allowing 'clean' to both activate an array and mark an active array as
clean can lead to races:  One program writes 'clean' to mark the
active array as clean at the same time as another program writes
'inactive' to deactivate (stop) and active array.  Depending on which
writes first, the array could be deactivated and immediately
reactivated which isn't what was desired.

So just disable the use of 'clean' to activate an array.

This avoids a race that can be triggered with mdadm-3.0 and external
metadata, so it suitable for -stable.

Reported-by: Rafal Marszewski <rafal.marszewski@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8350bde60d1..1dd723d3188 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3066,11 +3066,8 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len)
 			} else
 				err = -EBUSY;
 			spin_unlock_irq(&mddev->write_lock);
-		} else {
-			mddev->ro = 0;
-			mddev->recovery_cp = MaxSector;
-			err = do_md_run(mddev);
-		}
+		} else
+			err = -EINVAL;
 		break;
 	case active:
 		if (mddev->pers) {
-- 
GitLab


From c4647292fda0833bebe45be27f04453b736981fa Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Thu, 7 May 2009 12:51:06 +1000
Subject: [PATCH 1182/1421] md: remove rd%d links immediately after stopping an
 array.

md maintains link in sys/mdXX/md/ to identify which device has
which role in the array. e.g.
   rd2 -> dev-sda

indicates that the device with role '2' in the array is sda.

These links are only present when the array is active.  They are
created immediately after ->run is called, and so should be removed
immediately after ->stop is called.
However they are currently removed a little bit later, and it is
possible for ->run to be called again, thus adding these links, before
they are removed.

So move the removal earlier so they are consistently only present when
the array is active.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1dd723d3188..fccc8343a25 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4294,6 +4294,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 {
 	int err = 0;
 	struct gendisk *disk = mddev->gendisk;
+	mdk_rdev_t *rdev;
 
 	if (atomic_read(&mddev->openers) > is_open) {
 		printk("md: %s still in use.\n",mdname(mddev));
@@ -4336,6 +4337,13 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 			/* tell userspace to handle 'inactive' */
 			sysfs_notify_dirent(mddev->sysfs_state);
 
+			list_for_each_entry(rdev, &mddev->disks, same_set)
+				if (rdev->raid_disk >= 0) {
+					char nm[20];
+					sprintf(nm, "rd%d", rdev->raid_disk);
+					sysfs_remove_link(&mddev->kobj, nm);
+				}
+
 			set_capacity(disk, 0);
 			mddev->changed = 1;
 
@@ -4356,7 +4364,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 	 * Free resources if final stop
 	 */
 	if (mode == 0) {
-		mdk_rdev_t *rdev;
 
 		printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
 
@@ -4368,13 +4375,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 		}
 		mddev->bitmap_offset = 0;
 
-		list_for_each_entry(rdev, &mddev->disks, same_set)
-			if (rdev->raid_disk >= 0) {
-				char nm[20];
-				sprintf(nm, "rd%d", rdev->raid_disk);
-				sysfs_remove_link(&mddev->kobj, nm);
-			}
-
 		/* make sure all md_delayed_delete calls have finished */
 		flush_scheduled_work();
 
-- 
GitLab


From a029b706d3b2d3a139bdeae84131d9a0f35f6478 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@mvista.com>
Date: Thu, 7 May 2009 14:25:48 +0100
Subject: [PATCH 1183/1421] [ARM] 5506/1: davinci: DMA_32BIT_MASK -->
 DMA_BIT_MASK(32)

As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use
DMA_BIT_MASK(n)

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index c039674fe99..b2e7f9c63bc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -211,7 +211,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_32BIT_MASK;
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -220,7 +220,7 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 	},
 };
 
-- 
GitLab


From ae51e609843f7d0aaeb1c2ad9f89d252a4899885 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@gmail.com>
Date: Thu, 7 May 2009 16:18:40 +0100
Subject: [PATCH 1184/1421] [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and
 MOVT_ABS relocation types

From: Bruce Ashfield <bruce.ashfield@windriver.com>

To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.

The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.

The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself.  The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.

Signed-off-by: David Borman <david.borman@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/elf.h | 16 +++++++++-------
 arch/arm/kernel/module.c   | 15 +++++++++++++++
 2 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index d7da19bcf92..c207504de84 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
 #define EF_ARM_HASENTRY		0x00000002	/* All */
 #define EF_ARM_RELEXEC		0x00000001	/* All */
 
-#define R_ARM_NONE	0
-#define R_ARM_PC24	1
-#define R_ARM_ABS32	2
-#define R_ARM_CALL	28
-#define R_ARM_JUMP24	29
-#define R_ARM_V4BX	40
-#define R_ARM_PREL31	42
+#define R_ARM_NONE		0
+#define R_ARM_PC24		1
+#define R_ARM_ABS32		2
+#define R_ARM_CALL		28
+#define R_ARM_JUMP24		29
+#define R_ARM_V4BX		40
+#define R_ARM_PREL31		42
+#define R_ARM_MOVW_ABS_NC	43
+#define R_ARM_MOVT_ABS		44
 
 /*
  * These are used to set parameters in the core dumps.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d1731e39b49..bac03c81489 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = offset & 0x7fffffff;
 			break;
 
+		case R_ARM_MOVW_ABS_NC:
+		case R_ARM_MOVT_ABS:
+			offset = *(u32 *)loc;
+			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+			offset = (offset ^ 0x8000) - 0x8000;
+
+			offset += sym->st_value;
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u32 *)loc &= 0xfff0f000;
+			*(u32 *)loc |= ((offset & 0xf000) << 4) |
+					(offset & 0x0fff);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
-- 
GitLab


From 8a0a9bd4db63bc45e3017bedeafbd88d0eb84d02 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 5 May 2009 08:17:43 -0700
Subject: [PATCH 1185/1421] random: make get_random_int() more random

It's a really simple patch that basically just open-codes the current
"secure_ip_id()" call, but when open-coding it we now use a _static_
hashing area, so that it gets updated every time.

And to make sure somebody can't just start from the same original seed of
all-zeroes, and then do the "half_md4_transform()" over and over until
they get the same sequence as the kernel has, each iteration also mixes in
the same old "current->pid + jiffies" we used - so we should now have a
regular strong pseudo-number generator, but we also have one that doesn't
have a single seed.

Note: the "pid + jiffies" is just meant to be a tiny tiny bit of noise. It
has no real meaning. It could be anything. I just picked the previous
seed, it's just that now we keep the state in between calls and that will
feed into the next result, and that should make all the difference.

I made that hash be a per-cpu data just to avoid cache-line ping-pong:
having multiple CPU's write to the same data would be fine for randomness,
and add yet another layer of chaos to it, but since get_random_int() is
supposed to be a fast interface I did it that way instead. I considered
using "__raw_get_cpu_var()" to avoid any preemption overhead while still
getting the hash be _mostly_ ping-pong free, but in the end good taste won
out.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/random.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index f824ef8a927..b2ced39d76b 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1665,15 +1665,20 @@ EXPORT_SYMBOL(secure_dccp_sequence_number);
  * value is not cryptographically secure but for several uses the cost of
  * depleting entropy is too high
  */
+DEFINE_PER_CPU(__u32 [4], get_random_int_hash);
 unsigned int get_random_int(void)
 {
-	/*
-	 * Use IP's RNG. It suits our purpose perfectly: it re-keys itself
-	 * every second, from the entropy pool (and thus creates a limited
-	 * drain on it), and uses halfMD4Transform within the second. We
-	 * also mix it with jiffies and the PID:
-	 */
-	return secure_ip_id((__force __be32)(current->pid + jiffies));
+	struct keydata *keyptr;
+	__u32 *hash = get_cpu_var(get_random_int_hash);
+	int ret;
+
+	keyptr = get_keyptr();
+	hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret;
+
+	ret = half_md4_transform(hash, keyptr->secret);
+	put_cpu_var(get_random_int_hash);
+
+	return ret;
 }
 
 /*
-- 
GitLab


From 8c9ed899b44c19e81859fbb0e9d659fe2f8630fc Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 7 May 2009 11:41:37 +0100
Subject: [PATCH 1186/1421] NOMMU: Don't check vm_region::vm_start is page
 aligned in add_nommu_region()

Don't check vm_region::vm_start is page aligned in add_nommu_region() because
the region may reflect some non-page-aligned mapped file, such as could be
obtained from RomFS XIP.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/nommu.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/mm/nommu.c b/mm/nommu.c
index 67cd1a487ee..b571ef70742 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -515,8 +515,6 @@ static void add_nommu_region(struct vm_region *region)
 
 	validate_nommu_regions();
 
-	BUG_ON(region->vm_start & ~PAGE_MASK);
-
 	parent = NULL;
 	p = &nommu_region_tree.rb_node;
 	while (*p) {
-- 
GitLab


From 51991763416251f259efbfe459c16f331f31d01f Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 7 May 2009 15:24:31 -0400
Subject: [PATCH 1187/1421] ACPICA: use acpi.* modparam namespace

Add acpi/acpica/*.c to the acpi.* modparam namespace
so that any modparams we stick into ACPICA do not
expose ACPICA filenames to users.

There are currently only two modparams in ACPICA,
just recently added for
http://bugzilla.kernel.org/show_bug.cgi?id=13041

With this change, they become

acpi.gts=1
acpi.bfs=1

rather than

hwsleep.gts=1
hwsleep.bfs=1

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/Makefile | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 17e50824a6f..72ac28da14e 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -5,40 +5,43 @@
 ccflags-y			:= -Os
 ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 
-obj-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y	+= acpi.o
+
+acpi-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
 	 dsmethod.o  dsobject.o  dsutils.o   dswload.o  dswstate.o \
 	 dsinit.o
 
-obj-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
+acpi-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
 	 evmisc.o   evrgnini.o  evxface.o  evxfregn.o \
 	 evgpe.o    evgpeblk.o
 
-obj-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
+acpi-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
 	 exconvrt.o  exfldio.o  exoparg1.o  exprep.o    exresop.o   exsystem.o\
 	 excreate.o  exmisc.o   exoparg2.o  exregion.o  exstore.o   exutils.o \
 	 exdump.o    exmutex.o  exoparg3.o  exresnte.o  exstoren.o
 
-obj-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
 
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 
-obj-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
+acpi-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
 	 nsalloc.o   nseval.o    nsnames.o   nsutils.o   nsxfname.o \
 	 nsdump.o    nsinit.o    nsobject.o  nswalk.o    nsxfobj.o  \
 	 nsparse.o   nspredef.o
 
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
 
-obj-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
+acpi-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
 	 psopcode.o  psscope.o  psutils.o  psxface.o
 
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
 	 rscalc.o  rsirq.o  rsmemory.o  rsutils.o
 
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
 
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
 
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
 		utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
 		utstate.o utmutex.o utobject.o utresrc.o utlock.o
-- 
GitLab


From 5afc4abe7902b8453c248321daa9b13b12d9c838 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 7 May 2009 21:11:56 -0400
Subject: [PATCH 1188/1421] ACPI: video: DMI workaround another broken Acer
 BIOS enabling display brightness

http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 7e8ee49ebd4..3a3d1565a7d 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -562,6 +562,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
 		},
 	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5710Z",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+		},
+	},
 	{}
 };
 
-- 
GitLab


From d07a9cba6be5c0e947afc1014b5a62182a86f1f1 Mon Sep 17 00:00:00 2001
From: Tim Cole <tim.cole@canonical.com>
Date: Thu, 7 May 2009 17:08:42 -0700
Subject: [PATCH 1189/1421] Input: joydev - blacklist digitizers

BTN_TOUCH is not set by the wacom driver which causes it to be handled by the
joydev driver while the resulting device is broken. This causes problems with
applications that try to use a joystick device.

Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143

Signed-off-by: Tim Cole <tim.cole@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joydev.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 4224f011284..012a5e75399 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -843,7 +843,13 @@ static const struct input_device_id joydev_blacklist[] = {
 				INPUT_DEVICE_ID_MATCH_KEYBIT,
 		.evbit = { BIT_MASK(EV_KEY) },
 		.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
-	},	/* Avoid itouchpads, touchscreens and tablets */
+	},	/* Avoid itouchpads and touchscreens */
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+	},	/* Avoid tablets, digitisers and similar devices */
 	{ }	/* Terminating entry */
 };
 
-- 
GitLab


From 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Thu, 7 May 2009 17:14:21 -0700
Subject: [PATCH 1190/1421] Input: ff-memless - fix signed to unsigned bit
 overflow

When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or
larger, ml_combine_effects() would always return strong_magnitude
0xffff.

Problem is that 'gain' is passed in as signed integer. Multiplying
magnitude (__u16) with gain (int) causes magnitude read as signed and
results negative value (with magnitude > 0x8000). This signed integer
is then divided and value, still negative, converted to 32bit unsigned
integer. Finally checking combine overflow min(new+old, 0xffff) gives
out 0xffff.

Fix is to simply change 'gain' to unsigned int.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/ff-memless.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index bc4e40f3ede..2d1415e1683 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -226,7 +226,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type)
  */
 static void ml_combine_effects(struct ff_effect *effect,
 			       struct ml_effect_state *state,
-			       int gain)
+			       unsigned int gain)
 {
 	struct ff_effect *new = state->effect;
 	unsigned int strong, weak, i;
-- 
GitLab


From 90e4ee5d311d4e0729daa676b1d7f754265b5874 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 8 May 2009 03:04:30 +0000
Subject: [PATCH 1191/1421] [CIFS] Fix double list addition in cifs posix open
 code

Remove adding open file entry twice to lists in the file
Do not fill file info twice in case of posix opens and creates

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/dir.c  | 15 +++++++++------
 fs/cifs/file.c | 14 --------------
 2 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 461750e0136..11431ed72a7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -281,6 +281,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	int create_options = CREATE_NOT_DIR;
 	int oplock = 0;
 	int oflags;
+	bool posix_create = false;
 	/*
 	 * BB below access is probably too much for mknod to request
 	 *    but we have to do query and setpathinfo so requesting
@@ -328,11 +329,13 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		   negotation.  EREMOTE indicates DFS junction, which is not
 		   handled in posix open */
 
-		if ((rc == 0) && (newinode == NULL))
-			goto cifs_create_get_file_info; /* query inode info */
-		else if (rc == 0) /* success, no need to query */
-			goto cifs_create_set_dentry;
-		else if ((rc != -EIO) && (rc != -EREMOTE) &&
+		if (rc == 0) {
+			posix_create = true;
+			if (newinode == NULL) /* query inode info */
+				goto cifs_create_get_file_info;
+			else /* success, no need to query */
+				goto cifs_create_set_dentry;
+		} else if ((rc != -EIO) && (rc != -EREMOTE) &&
 			 (rc != -EOPNOTSUPP)) /* path not found or net err */
 			goto cifs_create_out;
 		/* else fallthrough to retry, using older open call, this is
@@ -464,7 +467,7 @@ cifs_create_set_dentry:
 	if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
 		/* mknod case - do not leave file open */
 		CIFSSMBClose(xid, tcon, fileHandle);
-	} else if (newinode) {
+	} else if (!(posix_create) && (newinode)) {
 			cifs_fill_fileinfo(newinode, fileHandle,
 					cifs_sb->tcon, write_only);
 	}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 50ca088d886..38c06f82657 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -129,15 +129,12 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
 			struct file *file, struct cifsInodeInfo *pCifsInode,
 			struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
 {
-	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-/*	struct timespec temp; */   /* BB REMOVEME BB */
 
 	file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
 	if (file->private_data == NULL)
 		return -ENOMEM;
 	pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
 	write_lock(&GlobalSMBSeslock);
-	list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
 
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
 	if (pCifsInode == NULL) {
@@ -145,17 +142,6 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
 		return -EINVAL;
 	}
 
-	/* want handles we can use to read with first
-	   in the list so we do not have to walk the
-	   list to search for one in write_begin */
-	if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-		list_add_tail(&pCifsFile->flist,
-			      &pCifsInode->openFileList);
-	} else {
-		list_add(&pCifsFile->flist,
-			 &pCifsInode->openFileList);
-	}
-
 	if (pCifsInode->clientCanCacheRead) {
 		/* we have the inode open somewhere else
 		   no need to discard cache data */
-- 
GitLab


From ddc50b6ad634d9ce2526a777d4b7da80effdfb60 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 8 May 2009 00:07:30 -0400
Subject: [PATCH 1192/1421] ACPI: power: update error message

"Transitioning device [%s] to D%d" is not correct.
We print this line when we attempted to transition
the device, and it failed.

So instead, print
"Device [%s] failed to transition to D%d\n"

This can happen under two conditions:

1. acpi_power_transition() fails when trying to handle the
   _ON/_OFF for associated power resource.

2. acpi_evaluate_object() on the explicit _PS0/_PS3
   for that actual device could fail.

this change clarifies, but doesn't fix
http://bugzilla.kernel.org/show_bug.cgi?id=13243

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e8f7b64e92d..ae862f1798d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
       end:
 	if (result)
 		printk(KERN_WARNING PREFIX
-			      "Transitioning device [%s] to D%d\n",
+			      "Device [%s] failed to transition to D%d\n",
 			      device->pnp.bus_id, state);
 	else {
 		device->power.state = state;
-- 
GitLab


From 19bde778c1fd2574cc020a618d7d576f260271ca Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 8 May 2009 00:22:29 -0400
Subject: [PATCH 1193/1421] ACPI: suspend: don't let device _PS3 failure
 prevent suspend

6328a57401dc5f5cf9931738eb7268fcd8058c49
"Enable PNPACPI _PSx Support, v3"

added a call to acpi_bus_set_power(handle, ACPI_STATE_D3)
to pnpacpi_disable_resource() before the existing call
to evaluate _DIS on the device.

This caused suspend to fail on the system in
http://bugzilla.kernel.org/show_bug.cgi?id=13243
because the sanity check to verify we entered _PS3
failed on the serial port.

As a work-around, that sanity check can be disabled
system-wide with "acpi.power_nocheck=1"

Or perhaps we should just shrug off the _PS3 failure
and carry on with _DIS like we used to -- which is
what this patch does.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/pnp/pnpacpi/core.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 9a3a682c698..9496494f340 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 
 	/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
 	ret = 0;
-	if (acpi_bus_power_manageable(handle)) {
-		ret = acpi_bus_set_power(handle, ACPI_STATE_D3);
-		if (ret)
-			return ret;
-	}
+	if (acpi_bus_power_manageable(handle))
+		acpi_bus_set_power(handle, ACPI_STATE_D3);
+		/* continue even if acpi_bus_set_power() fails */
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
 		ret = -ENODEV;
 	return ret;
-- 
GitLab


From 2b6b7d4be487bada8c727df829c25068c7b5e5a3 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Thu, 7 May 2009 21:35:13 -0700
Subject: [PATCH 1194/1421] IB/mlx4: Don't overwrite fast registration page
 list when posting work request

The low-level mlx4 driver modified the page-list addresses for fast
register work requests post send to big-endian, and set a "present"
bit.  This caused problems later when the consumer attempted to unmap
the pages using the page-list (using the list addresses which were
assumed to be still in CPU-endian order).  Fix the mlx4 driver to
allocate two buffers and use a private buffer for the hardware-format
bus addresses.

This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1571>,
an NFS/RDMA server crash.  The cause of the crash was found by Vu Pham
of Mellanox.  The fix is along the lines suggested by Steve Wise in
comment #21 in bug 1571.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/mlx4_ib.h |  1 +
 drivers/infiniband/hw/mlx4/mr.c      | 10 ++++++++--
 drivers/infiniband/hw/mlx4/qp.c      |  2 +-
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 9974e886b8d..8a7dd6795fa 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -86,6 +86,7 @@ struct mlx4_ib_mr {
 
 struct mlx4_ib_fast_reg_page_list {
 	struct ib_fast_reg_page_list	ibfrpl;
+	__be64			       *mapped_page_list;
 	dma_addr_t			map;
 };
 
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index 8e4d26d56a9..8f3666b20ea 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -231,7 +231,11 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device
 	if (!mfrpl)
 		return ERR_PTR(-ENOMEM);
 
-	mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
+	mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL);
+	if (!mfrpl->ibfrpl.page_list)
+		goto err_free;
+
+	mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
 						     size, &mfrpl->map,
 						     GFP_KERNEL);
 	if (!mfrpl->ibfrpl.page_list)
@@ -242,6 +246,7 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device
 	return &mfrpl->ibfrpl;
 
 err_free:
+	kfree(mfrpl->ibfrpl.page_list);
 	kfree(mfrpl);
 	return ERR_PTR(-ENOMEM);
 }
@@ -252,8 +257,9 @@ void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list)
 	struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list);
 	int size = page_list->max_page_list_len * sizeof (u64);
 
-	dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list,
+	dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list,
 			  mfrpl->map);
+	kfree(mfrpl->ibfrpl.page_list);
 	kfree(mfrpl);
 }
 
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index f385a24d31d..20724aee76f 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1365,7 +1365,7 @@ static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
 	int i;
 
 	for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
-		wr->wr.fast_reg.page_list->page_list[i] =
+		mfrpl->mapped_page_list[i] =
 			cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
 				    MLX4_MTT_FLAG_PRESENT);
 
-- 
GitLab


From 61438766514a2d7f191ce1b3cf6812eabbef4ef7 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 6 May 2009 13:02:19 +0100
Subject: [PATCH 1195/1421] x86: fix boot hang in early_reserve_e820()

If the first non-reserved (sub-)range doesn't fit the size requested,
an endless loop will be entered. If a range returned from
find_e820_area_size() turns out insufficient in size, the range must
be skipped before calling the function again.

[ Impact: fixes boot hang on some platforms ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/e820.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index ef2c3563357..00628130292 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1074,12 +1074,13 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
 	u64 addr;
 	u64 start;
 
-	start = startt;
-	while (size < sizet && (start + 1))
+	for (start = startt; ; start += size) {
 		start = find_e820_area_size(start, &size, align);
-
-	if (size < sizet)
-		return 0;
+		if (!(start + 1))
+			return 0;
+		if (size >= sizet)
+			break;
+	}
 
 #ifdef CONFIG_X86_32
 	if (start >= MAXMEM)
-- 
GitLab


From 498343967613183611ac37dccb2846496d954c06 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 6 May 2009 13:06:47 +0100
Subject: [PATCH 1196/1421] x86-64: finish cleanup_highmaps()'s job wrt.
 _brk_end

With the introduction of the .brk section, special care must be taken
that no unused page table entries remain if _brk_end and _end are
separated by a 2M page boundary. cleanup_highmap() runs very early and
hence cannot take care of that, hence potential entries needing to be
removed past _brk_end must be cleared once the brk allocator has done
its job.

[ Impact: avoids undesirable TLB aliases ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/init.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index fd3da1dda1c..ae4f7b5d710 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -7,6 +7,7 @@
 #include <asm/page.h>
 #include <asm/page_types.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 
@@ -304,8 +305,23 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 #endif
 
 #ifdef CONFIG_X86_64
-	if (!after_bootmem)
+	if (!after_bootmem && !start) {
+		pud_t *pud;
+		pmd_t *pmd;
+
 		mmu_cr4_features = read_cr4();
+
+		/*
+		 * _brk_end cannot change anymore, but it and _end may be
+		 * located on different 2M pages. cleanup_highmap(), however,
+		 * can only consider _end when it runs, so destroy any
+		 * mappings beyond _brk_end here.
+		 */
+		pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+		pmd = pmd_offset(pud, _brk_end - 1);
+		while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+			pmd_clear(pmd);
+	}
 #endif
 	__flush_tlb_all();
 
-- 
GitLab


From 6407df5ca54a511054200a1eb23f78f723ca1de4 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 8 May 2009 10:51:41 +0800
Subject: [PATCH 1197/1421] x86, kexec: fix crashdump panic with
 CONFIG_KEXEC_JUMP

Tim Starling reported that crashdump will panic with kernel compiled
with CONFIG_KEXEC_JUMP due to null pointer deference in
machine_kexec_32.c: machine_kexec(), when deferencing
kexec_image. Refering to:

http://bugzilla.kernel.org/show_bug.cgi?id=13265

This patch fixes the BUG via replacing global variable reference:
kexec_image in machine_kexec() with local variable reference: image,
which is more appropriate, and will not be null.

Same BUG is in machine_kexec_64.c too, so fixed too in the same way.

[ Impact: fix crash on kexec ]

Reported-by: Tim Starling <tstarling@wikimedia.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/machine_kexec_32.c | 4 ++--
 arch/x86/kernel/machine_kexec_64.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index e7368c1da01..c1c429d0013 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -194,7 +194,7 @@ void machine_kexec(struct kimage *image)
 				       unsigned int preserve_context);
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		save_processor_state();
 #endif
 
@@ -253,7 +253,7 @@ void machine_kexec(struct kimage *image)
 					   image->preserve_context);
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		restore_processor_state();
 #endif
 
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 89cea4d4467..84c3bf209e9 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -274,7 +274,7 @@ void machine_kexec(struct kimage *image)
 	int save_ftrace_enabled;
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		save_processor_state();
 #endif
 
@@ -333,7 +333,7 @@ void machine_kexec(struct kimage *image)
 				       image->preserve_context);
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		restore_processor_state();
 #endif
 
-- 
GitLab


From 5dd17cb992ef4c1ebb1a2d60cbef4b6967974673 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 7 May 2009 16:22:53 +0200
Subject: [PATCH 1198/1421] ALSA: hda - Fix line-in on Mac Mini Core2 Duo

BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to
the line-in jack, and it confuses the driver as if it's a valid input.
This patch adds the check of OUTPUT bit so that the driver fixes the
invalid pin setup.

Tested-by: Tino Keitel <tino.keitel@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 917bc5d3ac2..03b3646018a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4079,7 +4079,12 @@ static int stac92xx_init(struct hda_codec *codec)
 				pinctl = snd_hda_codec_read(codec, nid, 0,
 					AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
 				/* if PINCTL already set then skip */
-				if (!(pinctl & AC_PINCTL_IN_EN)) {
+				/* Also, if both INPUT and OUTPUT are set,
+				 * it must be a BIOS bug; need to override, too
+				 */
+				if (!(pinctl & AC_PINCTL_IN_EN) ||
+				    (pinctl & AC_PINCTL_OUT_EN)) {
+					pinctl &= ~AC_PINCTL_OUT_EN;
 					pinctl |= AC_PINCTL_IN_EN;
 					stac92xx_auto_set_pinctl(codec, nid,
 								 pinctl);
-- 
GitLab


From 33df4db04a79660150e1948e3296eeb451ac121b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 7 May 2009 11:56:44 -0700
Subject: [PATCH 1199/1421] x86: xen, i386: reserve Xen pagetables

The Xen pagetables are no longer implicitly reserved as part of the other
i386_start_kernel reservations, so make sure we explicitly reserve them.
This prevents them from being released into the general kernel free page
pool and reused.

[ Impact: fix Xen guest crash ]

Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4A032EEC.30509@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/mmu.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 9842b121240..e25a78e1113 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1794,6 +1794,11 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 
 	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
 
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
 	return swapper_pg_dir;
 }
 #endif	/* CONFIG_X86_64 */
-- 
GitLab


From e5299926d7459d9fa7c7f856983147817aedb10e Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Date: Fri, 8 May 2009 17:28:40 +0900
Subject: [PATCH 1200/1421] x86: MCE: make cmci_discover_lock irq-safe

Lockdep reports the warning below when Li tries to offline one cpu:

[  110.835487] =================================
[  110.835616] [ INFO: inconsistent lock state ]
[  110.835688] 2.6.30-rc4-00336-g8c9ed89 #52
[  110.835757] ---------------------------------
[  110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[  110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  110.835982]  (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b

cmci_clear() can be called via smp_call_function_single().

It is better to disable interrupt while holding cmci_discover_lock,
to turn it into an irq-safe lock - we can deadlock otherwise.

[ Impact: fix possible deadlock in the MCE code ]

Reported-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Shaohua Li<shaohua.li@intel.com>
---
 arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index d6b72df89d6..cef3ee30744 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -151,10 +151,11 @@ static void print_update(char *type, int *hdr, int num)
 static void cmci_discover(int banks, int boot)
 {
 	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+	unsigned long flags;
 	int hdr = 0;
 	int i;
 
-	spin_lock(&cmci_discover_lock);
+	spin_lock_irqsave(&cmci_discover_lock, flags);
 	for (i = 0; i < banks; i++) {
 		u64 val;
 
@@ -184,7 +185,7 @@ static void cmci_discover(int banks, int boot)
 			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
 		}
 	}
-	spin_unlock(&cmci_discover_lock);
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
 	if (hdr)
 		printk(KERN_CONT "\n");
 }
@@ -211,13 +212,14 @@ void cmci_recheck(void)
  */
 void cmci_clear(void)
 {
+	unsigned long flags;
 	int i;
 	int banks;
 	u64 val;
 
 	if (!cmci_supported(&banks))
 		return;
-	spin_lock(&cmci_discover_lock);
+	spin_lock_irqsave(&cmci_discover_lock, flags);
 	for (i = 0; i < banks; i++) {
 		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
 			continue;
@@ -227,7 +229,7 @@ void cmci_clear(void)
 		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
 		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
-	spin_unlock(&cmci_discover_lock);
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
 }
 
 /*
-- 
GitLab


From cd1a6de7d4a492bf3405a6c070075a4cb8c90262 Mon Sep 17 00:00:00 2001
From: Peter Horton <zero@colonel-panic.org>
Date: Fri, 8 May 2009 13:51:53 +0100
Subject: [PATCH 1201/1421] mtd: fix timeout in M25P80 driver

Extend erase timeout in M25P80 SPI Flash driver.

The M25P80 drivers fails erasing sectors on a M25P128 because the ready
wait timeout is too short. Change the timeout from a simple loop count to a
suitable number of seconds.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/m25p80.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index dfadef84c05..cc6369ea67d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
 #define	SR_SRWD			0x80	/* SR write protect */
 
 /* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_COUNT	1000000
+#define	MAX_READY_WAIT_JIFFIES	(10 * HZ)	/* eg. M25P128 specs 6s max sector erase */
 #define	CMD_SIZE		4
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
@@ -139,20 +139,20 @@ static inline int write_enable(struct m25p *flash)
  */
 static int wait_till_ready(struct m25p *flash)
 {
-	int count;
+	unsigned long deadline;
 	int sr;
 
-	/* one chip guarantees max 5 msec wait here after page writes,
-	 * but potentially three seconds (!) after page erase.
-	 */
-	for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
+	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+
+	do {
 		if ((sr = read_sr(flash)) < 0)
 			break;
 		else if (!(sr & SR_WIP))
 			return 0;
 
-		/* REVISIT sometimes sleeping would be best */
-	}
+		cond_resched();
+
+	} while (!time_after_eq(jiffies, deadline));
 
 	return 1;
 }
-- 
GitLab


From b9008708f24de8fb9bdbfb5d3b27e36d5a357eda Mon Sep 17 00:00:00 2001
From: Luca Tettamanti <kronos.it@gmail.com>
Date: Fri, 8 May 2009 20:27:28 +0200
Subject: [PATCH 1202/1421] hwmon: (asus_atk0110) Fix compiler warning

atk_sensor_type is only used when DEBUG is defined.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/asus_atk0110.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 0897edef257..bff0103610c 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -348,6 +348,7 @@ static int validate_hwmon_pack(struct atk_data *data, union acpi_object *obj)
 	return 0;
 }
 
+#ifdef DEBUG
 static char const *atk_sensor_type(union acpi_object *flags)
 {
 	u64 type = flags->integer.value & ATK_TYPE_MASK;
@@ -370,6 +371,7 @@ static char const *atk_sensor_type(union acpi_object *flags)
 
 	return what;
 }
+#endif
 
 static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
 {
-- 
GitLab


From 848ddf116b3d1711c956fac8627be12dfe8d736f Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 8 May 2009 20:27:28 +0200
Subject: [PATCH 1203/1421] hwmon: (w83781d) Fix W83782D support (NULL pointer
 dereference)

Commit 360782dde00a2e6e7d9fd57535f90934707ab8a8 (hwmon: (w83781d) Stop
abusing struct i2c_client for ISA devices) broke W83782D support for
devices connected on the ISA bus. You will hit a NULL pointer
dereference as soon as you read any device attribute. Other devices,
and W83782D devices on the SMBus, aren't affected.

Reported-by: Michel Abraham
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Michel Abraham
---
 drivers/hwmon/w83781d.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index dbfb30c588d..0bdab959b73 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1462,7 +1462,8 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
 				data->pwm[i] =
 				    w83781d_read_value(data,
 						       W83781D_REG_PWM[i]);
-				if ((data->type != w83782d || !client->driver)
+				/* Only W83782D on SMBus has PWM3 and PWM4 */
+				if ((data->type != w83782d || !client)
 				    && i == 1)
 					break;
 			}
-- 
GitLab


From cbec415991c0007f5c78fad76294373e8ac2d59a Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 1 May 2009 02:27:45 +0400
Subject: [PATCH 1204/1421] powerpc/fsl_soc: Remove mpc83xx_wdt_init, again

commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert
gianfar to an of_platform_driver"), possibly due merge issues,
reintroduced completely unneded mpc83xx_wdt_init call, which
I removed some time ago in commit 20d38e01d48019c578ab0ec1464454c0
("powerpc/fsl_soc: remove mpc83xx_wdt code").

Remove it once again.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c | 46 -----------------------------------
 1 file changed, 46 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index afe8dbc964a..5c64ccd402e 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
-	struct resource r;
-	struct device_node *np;
-	struct platform_device *dev;
-	u32 freq = fsl_get_sys_freq();
-	int ret;
-
-	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
-	if (!np) {
-		ret = -ENODEV;
-		goto nodev;
-	}
-
-	memset(&r, 0, sizeof(r));
-
-	ret = of_address_to_resource(np, 0, &r);
-	if (ret)
-		goto err;
-
-	dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
-	if (IS_ERR(dev)) {
-		ret = PTR_ERR(dev);
-		goto err;
-	}
-
-	ret = platform_device_add_data(dev, &freq, sizeof(freq));
-	if (ret)
-		goto unreg;
-
-	of_node_put(np);
-	return 0;
-
-unreg:
-	platform_device_unregister(dev);
-err:
-	of_node_put(np);
-nodev:
-	return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {
 	if (!phy_type)
-- 
GitLab


From 201517a7f3ec497fff545a7659c6c876f89f9054 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <mhiramat@redhat.com>
Date: Thu, 7 May 2009 16:31:26 -0400
Subject: [PATCH 1205/1421] kprobes: fix to use text_mutex around arm/disarm
 kprobe

Fix kprobes to lock text_mutex around some arch_arm/disarm_kprobe() which
are newly added by commit de5bd88d5a5cce3cacea904d3503e5ebdb3852a2.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kprobes.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index a5e74ddee0e..c0fa54b276d 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -319,6 +319,22 @@ struct kprobe __kprobes *get_kprobe(void *addr)
 	return NULL;
 }
 
+/* Arm a kprobe with text_mutex */
+static void __kprobes arm_kprobe(struct kprobe *kp)
+{
+	mutex_lock(&text_mutex);
+	arch_arm_kprobe(kp);
+	mutex_unlock(&text_mutex);
+}
+
+/* Disarm a kprobe with text_mutex */
+static void __kprobes disarm_kprobe(struct kprobe *kp)
+{
+	mutex_lock(&text_mutex);
+	arch_disarm_kprobe(kp);
+	mutex_unlock(&text_mutex);
+}
+
 /*
  * Aggregate handlers for multiple kprobes support - these handlers
  * take care of invoking the individual kprobe handlers on p->list
@@ -538,7 +554,7 @@ static int __kprobes add_new_kprobe(struct kprobe *ap, struct kprobe *p)
 		ap->flags &= ~KPROBE_FLAG_DISABLED;
 		if (!kprobes_all_disarmed)
 			/* Arm the breakpoint again. */
-			arch_arm_kprobe(ap);
+			arm_kprobe(ap);
 	}
 	return 0;
 }
@@ -789,11 +805,8 @@ static int __kprobes __unregister_kprobe_top(struct kprobe *p)
 		 * enabled and not gone - otherwise, the breakpoint would
 		 * already have been removed. We save on flushing icache.
 		 */
-		if (!kprobes_all_disarmed && !kprobe_disabled(old_p)) {
-			mutex_lock(&text_mutex);
-			arch_disarm_kprobe(p);
-			mutex_unlock(&text_mutex);
-		}
+		if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
+			disarm_kprobe(p);
 		hlist_del_rcu(&old_p->hlist);
 	} else {
 		if (p->break_handler && !kprobe_gone(p))
@@ -810,7 +823,7 @@ noclean:
 		if (!kprobe_disabled(old_p)) {
 			try_to_disable_aggr_kprobe(old_p);
 			if (!kprobes_all_disarmed && kprobe_disabled(old_p))
-				arch_disarm_kprobe(old_p);
+				disarm_kprobe(old_p);
 		}
 	}
 	return 0;
@@ -1364,7 +1377,7 @@ int __kprobes disable_kprobe(struct kprobe *kp)
 		try_to_disable_aggr_kprobe(p);
 
 	if (!kprobes_all_disarmed && kprobe_disabled(p))
-		arch_disarm_kprobe(p);
+		disarm_kprobe(p);
 out:
 	mutex_unlock(&kprobe_mutex);
 	return ret;
@@ -1393,7 +1406,7 @@ int __kprobes enable_kprobe(struct kprobe *kp)
 	}
 
 	if (!kprobes_all_disarmed && kprobe_disabled(p))
-		arch_arm_kprobe(p);
+		arm_kprobe(p);
 
 	p->flags &= ~KPROBE_FLAG_DISABLED;
 	if (p != kp)
-- 
GitLab


From 091bf7624d1c90cec9e578a18529f615213ff847 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 8 May 2009 17:14:14 -0700
Subject: [PATCH 1206/1421] Linux 2.6.30-rc5

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index b18afad2e10..9b2b58c3b3d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
-- 
GitLab


From d86c1302c58e4d4ebd99d459c2daff13613ac7f4 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 21 Apr 2009 07:22:53 -0700
Subject: [PATCH 1207/1421] Driver core: platform: fix kernel-doc warnings

Fix function parameter notation in platform.c;
fixes kernel-doc warnings.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/platform.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index b5b6c973a2e..ec5400c3202 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1028,7 +1028,7 @@ static __initdata LIST_HEAD(early_platform_device_list);
 
 /**
  * early_platform_driver_register
- * @edrv: early_platform driver structure
+ * @epdrv: early_platform driver structure
  * @buf: string passed from early_param()
  */
 int __init early_platform_driver_register(struct early_platform_driver *epdrv,
@@ -1112,7 +1112,7 @@ void __init early_platform_driver_register_all(char *class_str)
 
 /**
  * early_platform_match
- * @edrv: early platform driver structure
+ * @epdrv: early platform driver structure
  * @id: id to match against
  */
 static  __init struct platform_device *
@@ -1130,7 +1130,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id)
 
 /**
  * early_platform_left
- * @edrv: early platform driver structure
+ * @epdrv: early platform driver structure
  * @id: return true if id or above exists
  */
 static  __init int early_platform_left(struct early_platform_driver *epdrv,
-- 
GitLab


From 441ee4cb874622bc9a11c7b022a38919b04c105f Mon Sep 17 00:00:00 2001
From: Henrik Austad <henrik@austad.us>
Date: Mon, 20 Apr 2009 18:42:38 -0700
Subject: [PATCH 1208/1421] Doc/sysfs-rules: Swap the order of the words so the
 sentence makes more sense

Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/sysfs-rules.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 6049a2a84dd..5d8bc2cd250 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.
-- 
GitLab


From fe0e2bb9b3ca55b78e637b1260faeaa951523959 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Wed, 22 Apr 2009 15:49:31 -0400
Subject: [PATCH 1209/1421] Remove old PRINTK_DEBUG config item

On Tue, Apr 21, 2009 at 01:55:53PM +0200, Stefan Richter wrote:
> Robert P. J. Day wrote:
> >   lib/Kconfig.debug:      select PRINTK_DEBUG
> >
> > should that perhaps refer to "DYNAMIC_PRINTK_DEBUG"?  since there is
> > no such thing as a PRINTK_DEBUG Kconfig variable.
>
> Looks like a rudiment from an earlier version of Jason's "driver core:
> basic infrastructure for per-module dynamic debug messages",
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=346e15beb5343c2eb8216d820f2ed8f150822b08
> Search an LKML archive for '+#ifdef CONFIG_PRINTK_DEBUG'.
>
> Jason, should it be deleted or replaced by something?

We re-named 'DYNAMIC_PRINTK_DEBUG' to 'DYNAMIC_DEBUG' in 2.6.30....
'PRINTK_DEBUG' as pointed out never existed. So, it appears to be
extraneous, and should be removed. thanks for pointing it out.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/Kconfig.debug | 1 -
 1 file changed, 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 812c28207ba..6cdcf38f2da 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -891,7 +891,6 @@ config DYNAMIC_DEBUG
 	default n
 	depends on PRINTK
 	depends on DEBUG_FS
-	select PRINTK_DEBUG
 	help
 
 	  Compiles debug level messages into the kernel, which would not
-- 
GitLab


From bee86321b7b2312fbb62f4cb903eba1cca45e8ad Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 13 Mar 2009 23:06:59 +0800
Subject: [PATCH 1210/1421] Revert driver core: fix passing platform_data

This reverts commit ce21c7bcd796fc4f45d48781b7e85f493cc55ee5:
	We will remove platform_data field from struct device until
	all platform devices pass its specific data from platfom_device
	and all platform drivers use platform specific data passed by
	platform_device->platform_data. This kind of conversion will
	need a long time, for thousands of files is affected.

	To make the conversion easily, we allow platform specific data
	passed by struct device or struct platform_device and platform
	driver may use it from struct device or struct platform_device.

As we really don't want to do this at all.


Cc: David Brownell <david-b@pacbell.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/platform.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index ec5400c3202..d1d0ee43192 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -247,20 +247,7 @@ int platform_device_add(struct platform_device *pdev)
 	else
 		dev_set_name(&pdev->dev, pdev->name);
 
-	/* We will remove platform_data field from struct device
-	* if all platform devices pass its platform specific data
-	* from platform_device. The conversion is going to be a
-	* long time, so we allow the two cases coexist to make
-	* this kind of fix more easily*/
-	if (pdev->platform_data && pdev->dev.platform_data) {
-		printk(KERN_ERR
-			       "%s: use which platform_data?\n",
-			       dev_name(&pdev->dev));
-	} else if (pdev->platform_data) {
-		pdev->dev.platform_data = pdev->platform_data;
-	} else if (pdev->dev.platform_data) {
-		pdev->platform_data = pdev->dev.platform_data;
-	}
+	pdev->platform_data = pdev->dev.platform_data;
 
 	for (i = 0; i < pdev->num_resources; i++) {
 		struct resource *p, *r = &pdev->resource[i];
-- 
GitLab


From e67c85626cd02e306da1b4195bfaf68d61050796 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Sun, 8 Mar 2009 23:13:32 +0800
Subject: [PATCH 1211/1421] Revert driver core: move platform_data into
 platform_device

This reverts commit 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8:

	This patch moves platform_data from struct device into
	struct platform_device, based on the two ideas:

	1. Now all platform_driver is registered by platform_driver_register,
	   which makes probe()/release()/... of platform_driver passed parameter
	   of platform_device *, so platform driver can get platform_data from
	   platform_device;

	2. Other kind of devices do not need to use platform_data, we can
	   decrease size of device if moving it to platform_device.

	Taking into consideration of thousands of files to be fixed and they
	can't be finished in one night(maybe it will take a long time), so we
	keep platform_data in device to allow two kind of cases coexist until
	all platform devices pass its platfrom data from
	platform_device->platform_data.

	All patches to do this kind of conversion are welcome.

As we don't really want to do it, it was a bad idea.

Cc: David Brownell <david-b@pacbell.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/platform.c         | 3 ---
 include/linux/device.h          | 9 ++-------
 include/linux/platform_device.h | 1 -
 3 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d1d0ee43192..8b4708e0624 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -217,7 +217,6 @@ int platform_device_add_data(struct platform_device *pdev, const void *data,
 	if (d) {
 		memcpy(d, data, size);
 		pdev->dev.platform_data = d;
-		pdev->platform_data = d;
 	}
 	return d ? 0 : -ENOMEM;
 }
@@ -247,8 +246,6 @@ int platform_device_add(struct platform_device *pdev)
 	else
 		dev_set_name(&pdev->dev, pdev->name);
 
-	pdev->platform_data = pdev->dev.platform_data;
-
 	for (i = 0; i < pdev->num_resources; i++) {
 		struct resource *p, *r = &pdev->resource[i];
 
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a69caaac18..5d5c197bad4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -384,13 +384,8 @@ struct device {
 	struct device_driver *driver;	/* which driver has allocated this
 					   device */
 	void		*driver_data;	/* data private to the driver */
-
-	void		*platform_data;	/* We will remove platform_data
-					   field if all platform devices
-					   pass its platform specific data
-					   from platform_device->platform_data,
-					   other kind of devices should not
-					   use platform_data. */
+	void		*platform_data;	/* Platform specific data, device
+					   core doesn't touch it */
 	struct dev_pm_info	power;
 
 #ifdef CONFIG_NUMA
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 72736fd8223..b67bb5d7b22 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -20,7 +20,6 @@ struct platform_device {
 	struct device	dev;
 	u32		num_resources;
 	struct resource	* resource;
-	void		*platform_data;
 
 	struct platform_device_id	*id_entry;
 };
-- 
GitLab


From 10107bd04fc88657204ca40af2ace33626496fd3 Mon Sep 17 00:00:00 2001
From: Simon Arlott <simon@fire.lp0.eu>
Date: Thu, 23 Apr 2009 18:19:02 +0100
Subject: [PATCH 1212/1421] USB: cxacru: Fix negative dB output

Values of dB between -0.99 and -0.01 will be output with the wrong
sign. This converts the negative value to positive and outputs it
with a "-" prefix.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/atm/cxacru.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 6789089e246..56802d2e994 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -227,8 +227,14 @@ static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
 
 static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
-					value / 100, abs(value) % 100);
+	if (likely(value >= 0)) {
+		return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
+					value / 100, value % 100);
+	} else {
+		value = -value;
+		return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
+					value / 100, value % 100);
+	}
 }
 
 static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
-- 
GitLab


From 1002bb77c0b7f1241a5108ffa04d836ddc5060c0 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 23 Apr 2009 22:38:12 -0400
Subject: [PATCH 1213/1421] USB: ftdi_sio: add vendor/product id for the
 Marvell SheevaPlug

For reference:
http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 2 ++
 drivers/usb/serial/ftdi_sio.h | 6 ++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8100f1d2590..aab567644b9 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -669,6 +669,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index c09f658a448..12330fa1c09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -919,6 +919,12 @@
 #define JETI_VID		0x0c6c
 #define JETI_SPC1201_PID	0x04b2
 
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID		0x9e88
+#define MARVELL_SHEEVAPLUG_PID	0x9e8f
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
-- 
GitLab


From 72a772a9a3da47e1cdbe01c4aa1105aa8badfff2 Mon Sep 17 00:00:00 2001
From: Andy Lutomirski <amluto@gmail.com>
Date: Tue, 28 Apr 2009 15:53:02 -0400
Subject: [PATCH 1214/1421] USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC
 work.

If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then
cdc-wdm and usbtmc won't get built.

Signed-off-by: Andy Lutomirski <amluto@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 89299a5ce16..0716cdb44cd 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB)		+= wusbcore/
 
 obj-$(CONFIG_USB_ACM)		+= class/
 obj-$(CONFIG_USB_PRINTER)	+= class/
+obj-$(CONFIG_USB_WDM)		+= class/
+obj-$(CONFIG_USB_TMC)		+= class/
 
 obj-$(CONFIG_USB_STORAGE)	+= storage/
 obj-$(CONFIG_USB)		+= storage/
-- 
GitLab


From 0f43158caddcbb110916212ebe4e39993ae70864 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Mon, 27 Apr 2009 13:22:40 -0400
Subject: [PATCH 1215/1421] USB: Gadget: fix UTF conversion in the usbstring
 library

This patch (as1234) fixes a bug in the UTF8 -> UTF-16 conversion
routine in the gadget/usbstring library.  In a UTF-8 multi-byte
sequence, all bytes after the first should have their high-order
two bits set to 10, not 11.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/usbstring.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4154be375c7..58c4d37d312 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
 				uchar = (c & 0x1f) << 6;
 
 				c = (u8) *s++;
-				if ((c & 0xc0) != 0xc0)
+				if ((c & 0xc0) != 0x80)
 					goto fail;
 				c &= 0x3f;
 				uchar |= c;
@@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
 				uchar = (c & 0x0f) << 12;
 
 				c = (u8) *s++;
-				if ((c & 0xc0) != 0xc0)
+				if ((c & 0xc0) != 0x80)
 					goto fail;
 				c &= 0x3f;
 				uchar |= c << 6;
 
 				c = (u8) *s++;
-				if ((c & 0xc0) != 0xc0)
+				if ((c & 0xc0) != 0x80)
 					goto fail;
 				c &= 0x3f;
 				uchar |= c;
-- 
GitLab


From 031defd11ee11753110098603236a4257b2cc03d Mon Sep 17 00:00:00 2001
From: Phil Dibowitz <phil@ipom.com>
Date: Sun, 26 Apr 2009 12:47:51 +0200
Subject: [PATCH 1216/1421] USB: unusual_devs: extend nokia 6288 bcd range

This patch was originaly submitted by Phillip Potter
<phillipinda@hotmail.com> but was re-diffed to conform with
SubmittingPatches and to rebase on a newer tree by me.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fa65a3b0860..4b8b69045fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -160,8 +160,9 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Andrew Nayenko <relan@bk.ru> */
-UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
+/* Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0610,
 		"Nokia",
 		"Nokia 6288",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-- 
GitLab


From c45d63202fbaccef7ef7946c03f27f72c809b1cc Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 30 Apr 2009 10:06:19 -0400
Subject: [PATCH 1217/1421] usb-serial: ftdi_sio: fix reference counting of
 ftdi_private

This patch (as1238) adds proper reference counting for ftdi_sio's
private data structure.  Without it, the driver will free the
structure while it is still in use if the user unplugs the serial
device before closing the device file.

The patch also replaces a slightly dangerous
cancel_delayed_work/flush_scheduled_work pair with
cancel_delayed_work_sync, which is always safer.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Daniel Mack <daniel@caiaq.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aab567644b9..0ab8474b00c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID;
 static __u16 product;
 
 struct ftdi_private {
+	struct kref kref;
 	ftdi_chip_type_t chip_type;
 				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
@@ -1354,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
+	kref_init(&priv->kref);
 	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
@@ -1470,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial)
 	dbg("%s", __func__);
 }
 
+static void ftdi_sio_priv_release(struct kref *k)
+{
+	struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
+
+	kfree(priv);
+}
+
 static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1484,7 +1493,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	if (priv) {
 		usb_set_serial_port_data(port, NULL);
-		kfree(priv);
+		kref_put(&priv->kref, ftdi_sio_priv_release);
 	}
 
 	return 0;
@@ -1549,7 +1558,8 @@ static int ftdi_open(struct tty_struct *tty,
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
 			__func__, result);
-
+	else
+		kref_get(&priv->kref);
 
 	return result;
 } /* ftdi_open */
@@ -1591,11 +1601,11 @@ static void ftdi_close(struct tty_struct *tty,
 	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
-	cancel_delayed_work(&priv->rx_work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&priv->rx_work);
 
 	/* shutdown our bulk read */
 	usb_kill_urb(port->read_urb);
+	kref_put(&priv->kref, ftdi_sio_priv_release);
 } /* ftdi_close */
 
 
-- 
GitLab


From 82fbb01cf3c2bd150262269bd017431d7dd74063 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Thu, 16 Apr 2009 14:43:14 +0300
Subject: [PATCH 1218/1421] Staging: w35und: unregister device from the
 ieee80211 stack upon ->disconnect()

Impact: fix module removal

This patch fixes an oops when the w35und module is removed from the
kernel and added back.

Reported-by: luoyi <luoyi.ly@gmail.com>
Tested-by: Sandro Bonazzola <sandro.bonazzola@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/winbond/wbusb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 9c3f9439f35..3b2d52819b4 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -386,7 +386,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 	if (err)
 		goto error_free_hw;
 
-	usb_set_intfdata(intf, priv);
+	usb_set_intfdata(intf, dev);
 
 	return 0;
 
@@ -415,10 +415,15 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
 
 static void wb35_disconnect(struct usb_interface *intf)
 {
-	struct wbsoft_priv *priv = usb_get_intfdata(intf);
+	struct ieee80211_hw *hw = usb_get_intfdata(intf);
+	struct wbsoft_priv *priv = hw->priv;
 
 	wb35_hw_halt(priv);
 
+	ieee80211_stop_queues(hw);
+	ieee80211_unregister_hw(hw);
+	ieee80211_free_hw(hw);
+
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(interface_to_usbdev(intf));
 }
-- 
GitLab


From a9ed12e5c149b05adf13bea5f1e96d68c2127faf Mon Sep 17 00:00:00 2001
From: Dave Hayes <dwhayes@gmail.com>
Date: Sat, 18 Apr 2009 02:18:37 -0500
Subject: [PATCH 1219/1421] Staging: rt2870: new device id

Hey, I have an Edimax wireless USB adapter that uses the rt2870 chipset.
lsusb shows it as follows:

Bus 001 Device 002: ID 7392:7717

When I added that ID to rt2870.h, the device came up and worked as
expected.

From: Dave Hayes <dwhayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt2870/rt2870.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index a42caa37080..a69cf338e49 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -145,6 +145,7 @@
 	{USB_DEVICE(0x0789,0x0162)}, /* Logitec */		\
 	{USB_DEVICE(0x0789,0x0163)}, /* Logitec */		\
 	{USB_DEVICE(0x0789,0x0164)}, /* Logitec */		\
+	{USB_DEVICE(0x7392,0x7717)}, /* Edimax */		\
 	{ }/* Terminating entry */                      \
 }
 
-- 
GitLab


From be286fd229e95658516ddf880054ea3c9ad9bb34 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 18 Apr 2009 21:09:08 -0500
Subject: [PATCH 1220/1421] Staging: rtl8187se: Fix compilation warnings and
 procfs directory leak

Fix some warnings during compilation and correct a programming error
that was leaking a directory in /proc.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rtl8187se/r8180.h      |  2 +-
 drivers/staging/rtl8187se/r8180_core.c | 46 +++++---------------------
 2 files changed, 9 insertions(+), 39 deletions(-)

diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index 12215fc61dd..db446b7e2e0 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -19,7 +19,7 @@
 #define R8180H
 
 
-#define RTL8180_MODULE_NAME "rtl8180"
+#define RTL8180_MODULE_NAME "r8180"
 #define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
 #define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
 #define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 6ecd12de429..e10413cee0d 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_device *dev)
 {
 	struct proc_dir_entry *e;
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	priv->dir_dev = create_proc_entry(dev->name,
-					  S_IFDIR | S_IRUGO | S_IXUGO,
-					  rtl8180_proc);
+	priv->dir_dev = rtl8180_proc;
 	if (!priv->dir_dev) {
-		DMESGE("Unable to initialize /proc/net/rtl8180/%s\n",
+		DMESGE("Unable to initialize /proc/net/r8180/%s\n",
 		      dev->name);
 		return;
 	}
@@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-hw\n",
+		      "/proc/net/r8180/%s/stats-hw\n",
 		      dev->name);
 	}
 
@@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-rx\n",
+		      "/proc/net/r8180/%s/stats-rx\n",
 		      dev->name);
 	}
 
@@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-tx\n",
+		      "/proc/net/r8180/%s/stats-tx\n",
 		      dev->name);
 	}
 	#if 0
@@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/registers\n",
+		      "/proc/net/r8180/%s/registers\n",
 		      dev->name);
 	}
 }
@@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *dev, int pri)
 			      *tmp & (1<<15)? "ok": "err", *(tmp+4));
 	}
 
-	DMESG("nic at %d",
-		(nic-nicbegin) / 8 /4);
-	DMESG("tail at %d", ((int)tail - (int)begin) /8 /4);
-	DMESG("head at %d", ((int)head - (int)begin) /8 /4);
-	DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri));
-	DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri));
-	//rtl8180_reset(dev);
 	return;
 }
 
@@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
 		 * descriptor's buffer must be 256 byte aligned
 		 * we shouldn't be here, since we set DMA mask !
 		 */
-		DMESGW("Fixing TX alignment");
-		desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
-		desc = (u32*)((u64)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
-		desc = (u32*)((u32)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+		WARN(1, "DMA buffer is not aligned\n");
 	}
 	tmp=desc;
 	for (i=0;i<count;i++)
@@ -1984,18 +1965,7 @@ short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
 		 * descriptor's buffer must be 256 byte aligned
 		 * should never happen since we specify the DMA mask
 		 */
-
-		DMESGW("Fixing RX alignment");
-		desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
-		desc = (u32*)((u64)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
-		desc = (u32*)((u32)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+		WARN(1, "DMA buffer is not aligned\n");
 	}
 
 	priv->rxring=desc;
-- 
GitLab


From ca9fc928788a02a0fe975dc3334e6d7ec521b6af Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 24 Apr 2009 17:04:44 -0700
Subject: [PATCH 1221/1421] Staging: comedi: David doesn't want to get comedi
 patches

He's long moved on from the project.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/comedi/TODO | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO
index 55781295846..15c9348fb93 100644
--- a/drivers/staging/comedi/TODO
+++ b/drivers/staging/comedi/TODO
@@ -11,4 +11,3 @@ Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
 copy:
 	Ian Abbott <abbotti@mev.co.uk>
 	Frank Mori Hess <fmhess@users.sourceforge.net>
-	David Schleef <ds@schleef.org>
-- 
GitLab


From 85c2a74fabadfc561b75fbd7decc6bcbfe873d57 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Tue, 28 Apr 2009 23:38:46 +0900
Subject: [PATCH 1222/1421] nilfs2: fix possible recovery failure due to block
 creation without writer

Some function calls in nilfs_prepare_segment_for_recovery() may fail
because they can create blocks on meta data files without configuring
a writable FS-instance.  Concretely, nilfs_mdt_create_block() routine
of meta data files will fail in that case.

This fixes the problem by temporarily attaching a writable FS-instace
during the function is called.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/recovery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 4fc081e47d7..57afa9d2406 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -407,6 +407,7 @@ void nilfs_dispose_segment_list(struct list_head *head)
 }
 
 static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
+					      struct nilfs_sb_info *sbi,
 					      struct nilfs_recovery_info *ri)
 {
 	struct list_head *head = &ri->ri_used_segments;
@@ -421,6 +422,7 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	segnum[2] = ri->ri_segnum;
 	segnum[3] = ri->ri_nextnum;
 
+	nilfs_attach_writer(nilfs, sbi);
 	/*
 	 * Releasing the next segment of the latest super root.
 	 * The next segment is invalidated by this recovery.
@@ -459,10 +461,10 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	nilfs->ns_pseg_offset = 0;
 	nilfs->ns_seg_seq = ri->ri_seq + 2;
 	nilfs->ns_nextnum = nilfs->ns_segnum = segnum[0];
-	return 0;
 
  failed:
 	/* No need to recover sufile because it will be destroyed on error */
+	nilfs_detach_writer(nilfs, sbi);
 	return err;
 }
 
@@ -728,7 +730,7 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
 		goto failed;
 
 	if (ri->ri_need_recovery == NILFS_RECOVERY_ROLLFORWARD_DONE) {
-		err = nilfs_prepare_segment_for_recovery(nilfs, ri);
+		err = nilfs_prepare_segment_for_recovery(nilfs, sbi, ri);
 		if (unlikely(err)) {
 			printk(KERN_ERR "NILFS: Error preparing segments for "
 			       "recovery.\n");
-- 
GitLab


From 201913ed746c7724a40d33ee5a0b6a1fd2ef3193 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Tue, 28 Apr 2009 21:04:59 +0900
Subject: [PATCH 1223/1421] nilfs2: fix circular locking dependency of writer
 mutex

This fixes the following circular locking dependency problem:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3 #5
 -------------------------------------------------------
 segctord/3895 is trying to acquire lock:
  (&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>]
   nilfs_mdt_get_block+0x89/0x20f [nilfs2]

 but task is already holding lock:
  (&bmap->b_sem){++++..}, at: [<d0d02d99>]
   nilfs_bmap_propagate+0x14/0x2e [nilfs2]

 which lock already depends on the new lock.

The bugfix is done by replacing call sites of nilfs_get_writer() which
are never called from read-only context with direct dereferencing of
pointer to a writable FS-instance.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c |  8 +++++---
 fs/nilfs2/mdt.c   | 13 +++++++------
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 108d281ebca..be387c6b2d4 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -516,14 +516,16 @@ static ssize_t
 nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			     void *buf, size_t size, size_t nmembs)
 {
-	struct nilfs_sb_info *sbi = nilfs_get_writer(nilfs);
+	struct nilfs_sb_info *sbi = nilfs->ns_writer;
 	int ret;
 
-	if (unlikely(!sbi))
+	if (unlikely(!sbi)) {
+		/* never happens because called for a writable mount */
+		WARN_ON(1);
 		return -EROFS;
+	}
 	ret = nilfs_segctor_add_segments_to_be_freed(
 		NILFS_SC(sbi), buf, nmembs);
-	nilfs_put_writer(nilfs);
 
 	return (ret < 0) ? ret : nmembs;
 }
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 47dd815433f..e1c6777931b 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -77,19 +77,22 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block,
 						     void *))
 {
 	struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs;
-	struct nilfs_sb_info *writer = NULL;
 	struct super_block *sb = inode->i_sb;
 	struct nilfs_transaction_info ti;
 	struct buffer_head *bh;
 	int err;
 
 	if (!sb) {
-		writer = nilfs_get_writer(nilfs);
-		if (!writer) {
+		/*
+		 * Make sure this function is not called from any
+		 * read-only context.
+		 */
+		if (!nilfs->ns_writer) {
+			WARN_ON(1);
 			err = -EROFS;
 			goto out;
 		}
-		sb = writer->s_super;
+		sb = nilfs->ns_writer->s_super;
 	}
 
 	nilfs_transaction_begin(sb, &ti, 0);
@@ -127,8 +130,6 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block,
 		err = nilfs_transaction_commit(sb);
 	else
 		nilfs_transaction_abort(sb);
-	if (writer)
-		nilfs_put_writer(nilfs);
  out:
 	return err;
 }
-- 
GitLab


From 0c7a531a200480c7bc447260376973d830da9069 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 30 Apr 2009 14:52:58 +0100
Subject: [PATCH 1224/1421] GFS2: Fix glock ref counting bug

Depending on the ordering of events as we go around the
glock shrinker loop, it is possible to drop the ref count
of a glock incorrectly. It doesn't happen very often. This
patch corrects the got_ref variable, fixing the problem.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/glock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 1afd9f26bcb..ff498109048 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1304,6 +1304,7 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 				nr--;
 				if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 					gfs2_glock_put(gl);
+				got_ref = 0;
 			}
 			spin_lock(&lru_lock);
 			if (may_demote)
-- 
GitLab


From 67e55205ec55cc7899f1d783f217961596798419 Mon Sep 17 00:00:00 2001
From: Alessio Igor Bogani <abogani@texware.it>
Date: Fri, 24 Apr 2009 09:06:53 +0200
Subject: [PATCH 1225/1421] vfs: umount_begin BKL pushdown

Push BKL down into ->umount_begin()

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/9p/vfs_super.c | 6 +++++-
 fs/cifs/cifsfs.c  | 3 +++
 fs/fuse/inode.c   | 3 +++
 fs/namespace.c    | 2 --
 fs/nfs/super.c    | 7 ++++++-
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 5f8ab8adb5f..7d23214e559 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -37,6 +37,7 @@
 #include <linux/mount.h>
 #include <linux/idr.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <net/9p/9p.h>
 #include <net/9p/client.h>
 
@@ -230,9 +231,12 @@ static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
 static void
 v9fs_umount_begin(struct super_block *sb)
 {
-	struct v9fs_session_info *v9ses = sb->s_fs_info;
+	struct v9fs_session_info *v9ses;
 
+	lock_kernel();
+	v9ses = sb->s_fs_info;
 	v9fs_session_cancel(v9ses);
+	unlock_kernel();
 }
 
 static const struct super_operations v9fs_super_ops = {
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d6d8b57365..355e0efec0c 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/smp_lock.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #define DECLARE_GLOBALS_HERE
@@ -530,6 +531,7 @@ static void cifs_umount_begin(struct super_block *sb)
 	if (tcon == NULL)
 		return;
 
+	lock_kernel();
 	read_lock(&cifs_tcp_ses_lock);
 	if (tcon->tc_count == 1)
 		tcon->tidStatus = CifsExiting;
@@ -548,6 +550,7 @@ static void cifs_umount_begin(struct super_block *sb)
 	}
 /* BB FIXME - finish add checks for tidStatus BB */
 
+	unlock_kernel();
 	return;
 }
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 459b73dd45e..d1bc4d33ccb 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -19,6 +19,7 @@
 #include <linux/random.h>
 #include <linux/sched.h>
 #include <linux/exportfs.h>
+#include <linux/smp_lock.h>
 
 MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
 MODULE_DESCRIPTION("Filesystem in Userspace");
@@ -259,7 +260,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 
 static void fuse_umount_begin(struct super_block *sb)
 {
+	lock_kernel();
 	fuse_abort_conn(get_fuse_conn_super(sb));
+	unlock_kernel();
 }
 
 static void fuse_send_destroy(struct fuse_conn *fc)
diff --git a/fs/namespace.c b/fs/namespace.c
index 41196209a90..0d2003fb437 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1073,9 +1073,7 @@ static int do_umount(struct vfsmount *mnt, int flags)
 	 */
 
 	if (flags & MNT_FORCE && sb->s_op->umount_begin) {
-		lock_kernel();
 		sb->s_op->umount_begin(sb);
-		unlock_kernel();
 	}
 
 	/*
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 6717200923f..1679a164c8c 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -683,9 +683,12 @@ static int nfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
  */
 static void nfs_umount_begin(struct super_block *sb)
 {
-	struct nfs_server *server = NFS_SB(sb);
+	struct nfs_server *server;
 	struct rpc_clnt *rpc;
 
+	lock_kernel();
+
+	server = NFS_SB(sb);
 	/* -EIO all pending I/O */
 	rpc = server->client_acl;
 	if (!IS_ERR(rpc))
@@ -693,6 +696,8 @@ static void nfs_umount_begin(struct super_block *sb)
 	rpc = server->client;
 	if (!IS_ERR(rpc))
 		rpc_killall_tasks(rpc);
+
+	unlock_kernel();
 }
 
 /*
-- 
GitLab


From 5a6059c358d3b3004cb6b8562e3b049b1f8564f9 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Fri, 1 May 2009 12:11:12 -0400
Subject: [PATCH 1226/1421] reiserfs: Expand i_mutex to enclose lookup_one_len

 2.6.30-rc3 introduced some sanity checks in the VFS code to avoid NFS
 bugs by ensuring that lookup_one_len is always called under i_mutex.

 This patch expands the i_mutex locking to enclose lookup_one_len. This was
 always required, but not not enforced in the reiserfs code since it
 does locking around the xattr interactions with the xattr_sem.

 This is obvious enough, and it survived an overnight 50 thread ACL test.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/xattr.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f83f52bae39..31a3dbb120e 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -120,25 +120,20 @@ static struct dentry *lookup_or_create_dir(struct dentry *parent,
 	struct dentry *dentry;
 	BUG_ON(!parent);
 
+	mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_XATTR);
 	dentry = lookup_one_len(name, parent, strlen(name));
-	if (IS_ERR(dentry))
-		return dentry;
-	else if (!dentry->d_inode) {
+	if (!IS_ERR(dentry) && !dentry->d_inode) {
 		int err = -ENODATA;
 
-		if (xattr_may_create(flags)) {
-			mutex_lock_nested(&parent->d_inode->i_mutex,
-					  I_MUTEX_XATTR);
+		if (xattr_may_create(flags))
 			err = xattr_mkdir(parent->d_inode, dentry, 0700);
-			mutex_unlock(&parent->d_inode->i_mutex);
-		}
 
 		if (err) {
 			dput(dentry);
 			dentry = ERR_PTR(err);
 		}
 	}
-
+	mutex_unlock(&parent->d_inode->i_mutex);
 	return dentry;
 }
 
@@ -184,6 +179,7 @@ fill_with_dentries(void *buf, const char *name, int namelen, loff_t offset,
 {
 	struct reiserfs_dentry_buf *dbuf = buf;
 	struct dentry *dentry;
+	WARN_ON_ONCE(!mutex_is_locked(&dbuf->xadir->d_inode->i_mutex));
 
 	if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
 		return -ENOSPC;
@@ -349,6 +345,7 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name,
 	if (IS_ERR(xadir))
 		return ERR_CAST(xadir);
 
+	mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
 	xafile = lookup_one_len(name, xadir, strlen(name));
 	if (IS_ERR(xafile)) {
 		err = PTR_ERR(xafile);
@@ -360,18 +357,15 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name,
 
 	if (!xafile->d_inode) {
 		err = -ENODATA;
-		if (xattr_may_create(flags)) {
-			mutex_lock_nested(&xadir->d_inode->i_mutex,
-					  I_MUTEX_XATTR);
+		if (xattr_may_create(flags))
 			err = xattr_create(xadir->d_inode, xafile,
 					      0700|S_IFREG);
-			mutex_unlock(&xadir->d_inode->i_mutex);
-		}
 	}
 
 	if (err)
 		dput(xafile);
 out:
+	mutex_unlock(&xadir->d_inode->i_mutex);
 	dput(xadir);
 	if (err)
 		return ERR_PTR(err);
@@ -435,6 +429,7 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name)
 	if (IS_ERR(xadir))
 		return PTR_ERR(xadir);
 
+	mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
 	dentry = lookup_one_len(name, xadir, strlen(name));
 	if (IS_ERR(dentry)) {
 		err = PTR_ERR(dentry);
@@ -442,14 +437,13 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name)
 	}
 
 	if (dentry->d_inode) {
-		mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
 		err = xattr_unlink(xadir->d_inode, dentry);
-		mutex_unlock(&xadir->d_inode->i_mutex);
 		update_ctime(inode);
 	}
 
 	dput(dentry);
 out_dput:
+	mutex_unlock(&xadir->d_inode->i_mutex);
 	dput(xadir);
 	return err;
 }
@@ -906,9 +900,9 @@ static int create_privroot(struct dentry *dentry)
 {
 	int err;
 	struct inode *inode = dentry->d_parent->d_inode;
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
+	WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+
 	err = xattr_mkdir(inode, dentry, 0700);
-	mutex_unlock(&inode->i_mutex);
 	if (err) {
 		dput(dentry);
 		dentry = NULL;
@@ -980,6 +974,7 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 	/* If we don't have the privroot located yet - go find it */
 	if (!REISERFS_SB(s)->priv_root) {
 		struct dentry *dentry;
+		mutex_lock_nested(&s->s_root->d_inode->i_mutex, I_MUTEX_CHILD);
 		dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
 					strlen(PRIVROOT_NAME));
 		if (!IS_ERR(dentry)) {
@@ -993,6 +988,7 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 			}
 		} else
 			err = PTR_ERR(dentry);
+		mutex_unlock(&s->s_root->d_inode->i_mutex);
 
 		if (!err && dentry) {
 			s->s_root->d_op = &xattr_lookup_poison_ops;
-- 
GitLab


From edcc37a0478836b4a51eafb1bcec6a52708f681d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 3 May 2009 06:00:05 -0400
Subject: [PATCH 1227/1421] Always lookup priv_root on reiserfs mount and keep
 it

... even if it's a negative dentry.  That way we can set ->d_op on
root before anyone could race with us.  Simplify d_compare(), while
we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/super.c            |  6 ++-
 fs/reiserfs/xattr.c            | 86 ++++++++++++++--------------------
 include/linux/reiserfs_xattr.h |  1 +
 3 files changed, 41 insertions(+), 52 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 0ae6486d904..d444fe0013a 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1842,7 +1842,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 			goto error;
 		}
 
-		if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+		if ((errval = reiserfs_lookup_privroot(s)) ||
+		    (errval = reiserfs_xattr_init(s, s->s_flags))) {
 			dput(s->s_root);
 			s->s_root = NULL;
 			goto error;
@@ -1855,7 +1856,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 			reiserfs_info(s, "using 3.5.x disk format\n");
 		}
 
-		if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+		if ((errval = reiserfs_lookup_privroot(s)) ||
+		    (errval = reiserfs_xattr_init(s, s->s_flags))) {
 			dput(s->s_root);
 			s->s_root = NULL;
 			goto error;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 31a3dbb120e..2891f789f54 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -903,16 +903,19 @@ static int create_privroot(struct dentry *dentry)
 	WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
 
 	err = xattr_mkdir(inode, dentry, 0700);
-	if (err) {
-		dput(dentry);
-		dentry = NULL;
+	if (err || !dentry->d_inode) {
+		reiserfs_warning(dentry->d_sb, "jdm-20006",
+				 "xattrs/ACLs enabled and couldn't "
+				 "find/create .reiserfs_priv. "
+				 "Failing mount.");
+		return -EOPNOTSUPP;
 	}
 
-	if (dentry && dentry->d_inode)
-		reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
-			      "storage.\n", PRIVROOT_NAME);
+	dentry->d_inode->i_flags |= S_PRIVATE;
+	reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
+		      "storage.\n", PRIVROOT_NAME);
 
-	return err;
+	return 0;
 }
 
 static int xattr_mount_check(struct super_block *s)
@@ -944,11 +947,9 @@ static int
 xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
 {
 	struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
-	if (name->len == priv_root->d_name.len &&
-	    name->hash == priv_root->d_name.hash &&
-	    !memcmp(name->name, priv_root->d_name.name, name->len)) {
+	if (container_of(q1, struct dentry, d_name) == priv_root)
 		return -ENOENT;
-	} else if (q1->len == name->len &&
+	if (q1->len == name->len &&
 		   !memcmp(q1->name, name->name, name->len))
 		return 0;
 	return 1;
@@ -958,6 +959,27 @@ static const struct dentry_operations xattr_lookup_poison_ops = {
 	.d_compare = xattr_lookup_poison,
 };
 
+int reiserfs_lookup_privroot(struct super_block *s)
+{
+	struct dentry *dentry;
+	int err = 0;
+
+	/* If we don't have the privroot located yet - go find it */
+	mutex_lock(&s->s_root->d_inode->i_mutex);
+	dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
+				strlen(PRIVROOT_NAME));
+	if (!IS_ERR(dentry)) {
+		REISERFS_SB(s)->priv_root = dentry;
+		s->s_root->d_op = &xattr_lookup_poison_ops;
+		if (dentry->d_inode)
+			dentry->d_inode->i_flags |= S_PRIVATE;
+	} else
+		err = PTR_ERR(dentry);
+	mutex_unlock(&s->s_root->d_inode->i_mutex);
+
+	return err;
+}
+
 /* We need to take a copy of the mount flags since things like
  * MS_RDONLY don't get set until *after* we're called.
  * mount_flags != mount_options */
@@ -969,48 +991,12 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 	err = xattr_mount_check(s);
 	if (err)
 		goto error;
-#endif
 
-	/* If we don't have the privroot located yet - go find it */
-	if (!REISERFS_SB(s)->priv_root) {
-		struct dentry *dentry;
-		mutex_lock_nested(&s->s_root->d_inode->i_mutex, I_MUTEX_CHILD);
-		dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
-					strlen(PRIVROOT_NAME));
-		if (!IS_ERR(dentry)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
-			if (!(mount_flags & MS_RDONLY) && !dentry->d_inode)
-				err = create_privroot(dentry);
-#endif
-			if (!dentry->d_inode) {
-				dput(dentry);
-				dentry = NULL;
-			}
-		} else
-			err = PTR_ERR(dentry);
+	if (!REISERFS_SB(s)->priv_root->d_inode && !(mount_flags & MS_RDONLY)) {
+		mutex_lock(&s->s_root->d_inode->i_mutex);
+		err = create_privroot(REISERFS_SB(s)->priv_root);
 		mutex_unlock(&s->s_root->d_inode->i_mutex);
-
-		if (!err && dentry) {
-			s->s_root->d_op = &xattr_lookup_poison_ops;
-			dentry->d_inode->i_flags |= S_PRIVATE;
-			REISERFS_SB(s)->priv_root = dentry;
-#ifdef CONFIG_REISERFS_FS_XATTR
-		/* xattrs are unavailable */
-		} else if (!(mount_flags & MS_RDONLY)) {
-			/* If we're read-only it just means that the dir
-			 * hasn't been created. Not an error -- just no
-			 * xattrs on the fs. We'll check again if we
-			 * go read-write */
-			reiserfs_warning(s, "jdm-20006",
-					 "xattrs/ACLs enabled and couldn't "
-					 "find/create .reiserfs_priv. "
-					 "Failing mount.");
-			err = -EOPNOTSUPP;
-#endif
-		}
 	}
-
-#ifdef CONFIG_REISERFS_FS_XATTR
 	if (!err)
 		s->s_xattr = reiserfs_xattr_handlers;
 
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index dcae01e63e4..fea1a8e65be 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -38,6 +38,7 @@ struct nameidata;
 int reiserfs_xattr_register_handlers(void) __init;
 void reiserfs_xattr_unregister_handlers(void);
 int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
+int reiserfs_lookup_privroot(struct super_block *sb);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
 
-- 
GitLab


From ab17c4f02156c4f75d7fa43a5aa2a7f942d47201 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Tue, 5 May 2009 15:30:15 -0400
Subject: [PATCH 1228/1421] reiserfs: fixup xattr_root caching

 The xattr_root caching was broken from my previous patch set. It wouldn't
 cause corruption, but could cause decreased performance due to allocating
 a larger chunk of the journal (~ 27 blocks) than it would actually use.

 This patch loads the xattr root dentry at xattr initialization and creates
 it on-demand. Since we're using the cached dentry, there's no point
 in keeping lookup_or_create_dir around, so that's removed.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/xattr.c            | 73 +++++++++++++++++++++-------------
 include/linux/reiserfs_fs_sb.h |  2 +-
 include/linux/reiserfs_xattr.h |  2 +-
 3 files changed, 48 insertions(+), 29 deletions(-)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 2891f789f54..c77984473db 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -113,36 +113,28 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry)
 
 #define xattr_may_create(flags)	(!flags || flags & XATTR_CREATE)
 
-/* Returns and possibly creates the xattr dir. */
-static struct dentry *lookup_or_create_dir(struct dentry *parent,
-					    const char *name, int flags)
+static struct dentry *open_xa_root(struct super_block *sb, int flags)
 {
-	struct dentry *dentry;
-	BUG_ON(!parent);
+	struct dentry *privroot = REISERFS_SB(sb)->priv_root;
+	struct dentry *xaroot;
+	if (!privroot->d_inode)
+		return ERR_PTR(-ENODATA);
 
-	mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_XATTR);
-	dentry = lookup_one_len(name, parent, strlen(name));
-	if (!IS_ERR(dentry) && !dentry->d_inode) {
-		int err = -ENODATA;
+	mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
 
+	xaroot = dget(REISERFS_SB(sb)->xattr_root);
+	if (!xaroot->d_inode) {
+		int err = -ENODATA;
 		if (xattr_may_create(flags))
-			err = xattr_mkdir(parent->d_inode, dentry, 0700);
-
+			err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
 		if (err) {
-			dput(dentry);
-			dentry = ERR_PTR(err);
+			dput(xaroot);
+			xaroot = ERR_PTR(err);
 		}
 	}
-	mutex_unlock(&parent->d_inode->i_mutex);
-	return dentry;
-}
 
-static struct dentry *open_xa_root(struct super_block *sb, int flags)
-{
-	struct dentry *privroot = REISERFS_SB(sb)->priv_root;
-	if (!privroot)
-		return ERR_PTR(-ENODATA);
-	return lookup_or_create_dir(privroot, XAROOT_NAME, flags);
+	mutex_unlock(&privroot->d_inode->i_mutex);
+	return xaroot;
 }
 
 static struct dentry *open_xa_dir(const struct inode *inode, int flags)
@@ -158,10 +150,22 @@ static struct dentry *open_xa_dir(const struct inode *inode, int flags)
 		 le32_to_cpu(INODE_PKEY(inode)->k_objectid),
 		 inode->i_generation);
 
-	xadir = lookup_or_create_dir(xaroot, namebuf, flags);
+	mutex_lock_nested(&xaroot->d_inode->i_mutex, I_MUTEX_XATTR);
+
+	xadir = lookup_one_len(namebuf, xaroot, strlen(namebuf));
+	if (!IS_ERR(xadir) && !xadir->d_inode) {
+		int err = -ENODATA;
+		if (xattr_may_create(flags))
+			err = xattr_mkdir(xaroot->d_inode, xadir, 0700);
+		if (err) {
+			dput(xadir);
+			xadir = ERR_PTR(err);
+		}
+	}
+
+	mutex_unlock(&xaroot->d_inode->i_mutex);
 	dput(xaroot);
 	return xadir;
-
 }
 
 /* The following are side effects of other operations that aren't explicitly
@@ -986,19 +990,33 @@ int reiserfs_lookup_privroot(struct super_block *s)
 int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 {
 	int err = 0;
+	struct dentry *privroot = REISERFS_SB(s)->priv_root;
 
 #ifdef CONFIG_REISERFS_FS_XATTR
 	err = xattr_mount_check(s);
 	if (err)
 		goto error;
 
-	if (!REISERFS_SB(s)->priv_root->d_inode && !(mount_flags & MS_RDONLY)) {
+	if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) {
 		mutex_lock(&s->s_root->d_inode->i_mutex);
 		err = create_privroot(REISERFS_SB(s)->priv_root);
 		mutex_unlock(&s->s_root->d_inode->i_mutex);
 	}
-	if (!err)
+
+	if (privroot->d_inode) {
 		s->s_xattr = reiserfs_xattr_handlers;
+		mutex_lock(&privroot->d_inode->i_mutex);
+		if (!REISERFS_SB(s)->xattr_root) {
+			struct dentry *dentry;
+			dentry = lookup_one_len(XAROOT_NAME, privroot,
+						strlen(XAROOT_NAME));
+			if (!IS_ERR(dentry))
+				REISERFS_SB(s)->xattr_root = dentry;
+			else
+				err = PTR_ERR(dentry);
+		}
+		mutex_unlock(&privroot->d_inode->i_mutex);
+	}
 
 error:
 	if (err) {
@@ -1008,11 +1026,12 @@ error:
 #endif
 
 	/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
-	s->s_flags = s->s_flags & ~MS_POSIXACL;
 #ifdef CONFIG_REISERFS_FS_POSIX_ACL
 	if (reiserfs_posixacl(s))
 		s->s_flags |= MS_POSIXACL;
+	else
 #endif
+		s->s_flags &= ~MS_POSIXACL;
 
 	return err;
 }
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 6b361d23a49..8651640868a 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -402,7 +402,7 @@ struct reiserfs_sb_info {
 	int reserved_blocks;	/* amount of blocks reserved for further allocations */
 	spinlock_t bitmap_lock;	/* this lock on now only used to protect reserved_blocks variable */
 	struct dentry *priv_root;	/* root of /.reiserfs_priv */
-	struct dentry *xattr_root;	/* root of /.reiserfs_priv/.xa */
+	struct dentry *xattr_root;	/* root of /.reiserfs_priv/xattrs */
 	int j_errno;
 #ifdef CONFIG_QUOTA
 	char *s_qf_names[MAXQUOTAS];
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index fea1a8e65be..cdedc01036e 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -98,7 +98,7 @@ static inline size_t reiserfs_xattr_jcreate_nblocks(struct inode *inode)
 
 	if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) {
 		nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
-		if (REISERFS_SB(inode->i_sb)->xattr_root == NULL)
+		if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode)
 			nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
 	}
 
-- 
GitLab


From b82bb72ba7df473461c5e2368a4e7497c8ce76e9 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Tue, 5 May 2009 15:30:16 -0400
Subject: [PATCH 1229/1421] reiserfs: dont associate security.* with xattr
 files

 The security.* xattrs are ignored for xattr files, so don't create them.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/xattr_security.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c
index 4d3c20e787c..a92c8792c0f 100644
--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -55,8 +55,16 @@ int reiserfs_security_init(struct inode *dir, struct inode *inode,
 			   struct reiserfs_security_handle *sec)
 {
 	int blocks = 0;
-	int error = security_inode_init_security(inode, dir, &sec->name,
-						 &sec->value, &sec->length);
+	int error;
+
+	sec->name = NULL;
+
+	/* Don't add selinux attributes on xattrs - they'll never get used */
+	if (IS_PRIVATE(dir))
+		return 0;
+
+	error = security_inode_init_security(inode, dir, &sec->name,
+					     &sec->value, &sec->length);
 	if (error) {
 		if (error == -EOPNOTSUPP)
 			error = 0;
-- 
GitLab


From 677c9b2e393a0cd203bd54e9c18b012b2c73305a Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Tue, 5 May 2009 15:30:17 -0400
Subject: [PATCH 1230/1421] reiserfs: remove privroot hiding in lookup

 With Al Viro's patch to move privroot lookup to fs mount, there's no need
 to have special code to hide the privroot in reiserfs_lookup.

 I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and
 removed the last user of reiserfs_xattrs().

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/dir.c              | 24 +++++++++++++-----------
 fs/reiserfs/namei.c            | 17 ++---------------
 fs/reiserfs/xattr.c            |  2 +-
 include/linux/reiserfs_fs_sb.h |  1 -
 4 files changed, 16 insertions(+), 28 deletions(-)

diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 67a80d7e59e..45ee3d357c7 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -41,6 +41,18 @@ static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
 
 #define store_ih(where,what) copy_item_head (where, what)
 
+static inline bool is_privroot_deh(struct dentry *dir,
+				   struct reiserfs_de_head *deh)
+{
+	int ret = 0;
+#ifdef CONFIG_REISERFS_FS_XATTR
+	struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
+	ret = (dir == dir->d_parent && privroot->d_inode &&
+	       deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
+#endif
+	return ret;
+}
+
 int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
 			   filldir_t filldir, loff_t *pos)
 {
@@ -138,18 +150,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
 				}
 
 				/* Ignore the .reiserfs_priv entry */
-				if (reiserfs_xattrs(inode->i_sb) &&
-				    !old_format_only(inode->i_sb) &&
-				    dentry == inode->i_sb->s_root &&
-				    REISERFS_SB(inode->i_sb)->priv_root &&
-				    REISERFS_SB(inode->i_sb)->priv_root->d_inode
-				    && deh_objectid(deh) ==
-				    le32_to_cpu(INODE_PKEY
-						(REISERFS_SB(inode->i_sb)->
-						 priv_root->d_inode)->
-						k_objectid)) {
+				if (is_privroot_deh(dentry, deh))
 					continue;
-				}
 
 				d_off = deh_offset(deh);
 				*pos = d_off;
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index efd4d720718..27157912863 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -338,21 +338,8 @@ static struct dentry *reiserfs_lookup(struct inode *dir, struct dentry *dentry,
 				&path_to_entry, &de);
 	pathrelse(&path_to_entry);
 	if (retval == NAME_FOUND) {
-		/* Hide the .reiserfs_priv directory */
-		if (reiserfs_xattrs(dir->i_sb) &&
-		    !old_format_only(dir->i_sb) &&
-		    REISERFS_SB(dir->i_sb)->priv_root &&
-		    REISERFS_SB(dir->i_sb)->priv_root->d_inode &&
-		    de.de_objectid ==
-		    le32_to_cpu(INODE_PKEY
-				(REISERFS_SB(dir->i_sb)->priv_root->d_inode)->
-				k_objectid)) {
-			reiserfs_write_unlock(dir->i_sb);
-			return ERR_PTR(-EACCES);
-		}
-
-		inode =
-		    reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id));
+		inode = reiserfs_iget(dir->i_sb,
+				      (struct cpu_key *)&(de.de_dir_id));
 		if (!inode || IS_ERR(inode)) {
 			reiserfs_write_unlock(dir->i_sb);
 			return ERR_PTR(-EACCES);
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index c77984473db..2237e10c7c7 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -841,7 +841,7 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
 	if (!dentry->d_inode)
 		return -EINVAL;
 
-	if (!reiserfs_xattrs(dentry->d_sb) ||
+	if (!dentry->d_sb->s_xattr ||
 	    get_inode_sd_version(dentry->d_inode) == STAT_DATA_V1)
 		return -EOPNOTSUPP;
 
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 8651640868a..6473650c28f 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -488,7 +488,6 @@ enum reiserfs_mount_options {
 #define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG))
 #define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED))
 #define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
-#define reiserfs_xattrs(s) ((s)->s_xattr != NULL)
 #define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
 #define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
 #define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
-- 
GitLab


From 74dbbdd7fdc11763f4698d2f3e684cf4446951e6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:07:50 -0400
Subject: [PATCH 1231/1421] New helper: deactivate_locked_super()

Does equivalent of up_write(&s->s_umount); deactivate_super(s);
However, it does not does not unlock it until it's all over.
As the result, it's safe to use to dispose of new superblock on ->get_sb()
failure exits - nobody will see the sucker until it's all over.
Equivalent using up_write/deactivate_super is safe for that purpose
if superblock is either	safe to use or has NULL ->s_root when we unlock.
Normally filesystems take the required precautions, but
	a) we do have bugs in that area in some of them.
	b) up_write/deactivate_super sequence is extremely common,
so the helper makes sense anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/super.c         | 46 ++++++++++++++++++++++++++++++++++------------
 include/linux/fs.h |  1 +
 2 files changed, 35 insertions(+), 12 deletions(-)

diff --git a/fs/super.c b/fs/super.c
index 786fe7d7279..a9dc4c33ef4 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -207,6 +207,34 @@ void deactivate_super(struct super_block *s)
 
 EXPORT_SYMBOL(deactivate_super);
 
+/**
+ *	deactivate_locked_super	-	drop an active reference to superblock
+ *	@s: superblock to deactivate
+ *
+ *	Equivalent of up_write(&s->s_umount); deactivate_super(s);, except that
+ *	it does not unlock it until it's all over.  As the result, it's safe to
+ *	use to dispose of new superblock on ->get_sb() failure exits - nobody
+ *	will see the sucker until it's all over.  Equivalent using up_write +
+ *	deactivate_super is safe for that purpose only if superblock is either
+ *	safe to use or has NULL ->s_root when we unlock.
+ */
+void deactivate_locked_super(struct super_block *s)
+{
+	struct file_system_type *fs = s->s_type;
+	if (atomic_dec_and_lock(&s->s_active, &sb_lock)) {
+		s->s_count -= S_BIAS-1;
+		spin_unlock(&sb_lock);
+		vfs_dq_off(s, 0);
+		fs->kill_sb(s);
+		put_filesystem(fs);
+		put_super(s);
+	} else {
+		up_write(&s->s_umount);
+	}
+}
+
+EXPORT_SYMBOL(deactivate_locked_super);
+
 /**
  *	grab_super - acquire an active reference
  *	@s: reference we are trying to make active
@@ -797,8 +825,7 @@ int get_sb_ns(struct file_system_type *fs_type, int flags, void *data,
 		sb->s_flags = flags;
 		err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 		if (err) {
-			up_write(&sb->s_umount);
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			return err;
 		}
 
@@ -854,8 +881,7 @@ int get_sb_bdev(struct file_system_type *fs_type,
 
 	if (s->s_root) {
 		if ((flags ^ s->s_flags) & MS_RDONLY) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = -EBUSY;
 			goto error_bdev;
 		}
@@ -870,8 +896,7 @@ int get_sb_bdev(struct file_system_type *fs_type,
 		sb_set_blocksize(s, block_size(bdev));
 		error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
 		if (error) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			goto error;
 		}
 
@@ -921,8 +946,7 @@ int get_sb_nodev(struct file_system_type *fs_type,
 
 	error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
 	if (error) {
-		up_write(&s->s_umount);
-		deactivate_super(s);
+		deactivate_locked_super(s);
 		return error;
 	}
 	s->s_flags |= MS_ACTIVE;
@@ -952,8 +976,7 @@ int get_sb_single(struct file_system_type *fs_type,
 		s->s_flags = flags;
 		error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
 		if (error) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			return error;
 		}
 		s->s_flags |= MS_ACTIVE;
@@ -1006,8 +1029,7 @@ vfs_kern_mount(struct file_system_type *type, int flags, const char *name, void
 	return mnt;
 out_sb:
 	dput(mnt->mnt_root);
-	up_write(&mnt->mnt_sb->s_umount);
-	deactivate_super(mnt->mnt_sb);
+	deactivate_locked_super(mnt->mnt_sb);
 out_free_secdata:
 	free_secdata(secdata);
 out_mnt:
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5bed436f435..11484d08042 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1775,6 +1775,7 @@ void kill_block_super(struct super_block *sb);
 void kill_anon_super(struct super_block *sb);
 void kill_litter_super(struct super_block *sb);
 void deactivate_super(struct super_block *sb);
+void deactivate_locked_super(struct super_block *sb);
 int set_anon_super(struct super_block *s, void *data);
 struct super_block *sget(struct file_system_type *type,
 			int (*test)(struct super_block *,void *),
-- 
GitLab


From 6f5bbff9a1b7d6864a495763448a363bbfa96324 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:34:22 -0400
Subject: [PATCH 1232/1421] Convert obvious places to deactivate_locked_super()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/mtd/mtdsuper.c |  3 +--
 fs/9p/vfs_super.c      |  5 +----
 fs/afs/super.c         |  3 +--
 fs/btrfs/super.c       | 12 ++++--------
 fs/cifs/cifsfs.c       |  3 +--
 fs/devpts/inode.c      |  5 ++---
 fs/ecryptfs/main.c     |  5 ++---
 fs/libfs.c             |  3 +--
 fs/nfs/super.c         | 15 +++++----------
 fs/proc/root.c         |  3 +--
 fs/ubifs/super.c       |  3 +--
 kernel/cgroup.c        |  3 +--
 12 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 92285d0089c..af8b42e0a55 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags,
 
 	ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 	if (ret < 0) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
+		deactivate_locked_super(sb);
 		return ret;
 	}
 
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 7d23214e559..0d29a57c63e 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -174,10 +174,7 @@ P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	return 0;
 
 release_sb:
-	if (sb) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
-	}
+	deactivate_locked_super(sb);
 
 free_stat:
 	kfree(st);
diff --git a/fs/afs/super.c b/fs/afs/super.c
index aee239a048c..2753f16dd31 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -405,8 +405,7 @@ static int afs_get_sb(struct file_system_type *fs_type,
 		sb->s_flags = flags;
 		ret = afs_fill_super(sb, &params);
 		if (ret < 0) {
-			up_write(&sb->s_umount);
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			goto error;
 		}
 		sb->s_options = new_opts;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 3536bdb2d7c..6dfae5b28f5 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -502,8 +502,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 
 	if (s->s_root) {
 		if ((flags ^ s->s_flags) & MS_RDONLY) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = -EBUSY;
 			goto error_close_devices;
 		}
@@ -517,8 +516,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		error = btrfs_fill_super(s, fs_devices, data,
 					 flags & MS_SILENT ? 1 : 0);
 		if (error) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			goto error_free_subvol_name;
 		}
 
@@ -535,15 +533,13 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		mutex_unlock(&s->s_root->d_inode->i_mutex);
 
 		if (IS_ERR(root)) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = PTR_ERR(root);
 			goto error_free_subvol_name;
 		}
 		if (!root->d_inode) {
 			dput(root);
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = -ENXIO;
 			goto error_free_subvol_name;
 		}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 355e0efec0c..5e6d35804d7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -602,8 +602,7 @@ cifs_get_sb(struct file_system_type *fs_type,
 
 	rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0);
 	if (rc) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
+		deactivate_locked_super(sb);
 		return rc;
 	}
 	sb->s_flags |= MS_ACTIVE;
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 63a4a59e414..21165cf934f 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -389,11 +389,10 @@ static int devpts_get_sb(struct file_system_type *fs_type,
 	return 0;
 
 out_dput:
-	dput(s->s_root);
+	dput(s->s_root); /* undo dget() in simple_set_mnt() */
 
 out_undo_sget:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	return error;
 }
 
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index ccabd5faa04..9f0aa9883c2 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -614,9 +614,8 @@ static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags,
 	}
 	goto out;
 out_abort:
-	dput(sb->s_root);
-	up_write(&sb->s_umount);
-	deactivate_super(sb);
+	dput(sb->s_root); /* aka mnt->mnt_root, as set by get_sb_nodev() */
+	deactivate_locked_super(sb);
 out:
 	return rc;
 }
diff --git a/fs/libfs.c b/fs/libfs.c
index cd223190c4e..80046ddf506 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -246,8 +246,7 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 	return 0;
 
 Enomem:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	return -ENOMEM;
 }
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 1679a164c8c..d2d67781c57 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2111,8 +2111,7 @@ out_err_nosb:
 error_splat_root:
 	dput(mntroot);
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	goto out;
 }
 
@@ -2208,8 +2207,7 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error);
 	return error;
 }
@@ -2469,8 +2467,7 @@ out_free:
 error_splat_root:
 	dput(mntroot);
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	goto out;
 }
 
@@ -2564,8 +2561,7 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error);
 	return error;
 }
@@ -2649,8 +2645,7 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error);
 	return error;
 }
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 1e15a2b176e..b080b791d9e 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -67,8 +67,7 @@ static int proc_get_sb(struct file_system_type *fs_type,
 		sb->s_flags = flags;
 		err = proc_fill_super(sb);
 		if (err) {
-			up_write(&sb->s_umount);
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			return err;
 		}
 
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index faa44f90608..e9f7a754c4f 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2055,8 +2055,7 @@ static int ubifs_get_sb(struct file_system_type *fs_type, int flags,
 	return 0;
 
 out_deact:
-	up_write(&sb->s_umount);
-	deactivate_super(sb);
+	deactivate_locked_super(sb);
 out_close:
 	ubi_close_volume(ubi);
 	return err;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 382109b5bae..a7267bfd376 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1133,8 +1133,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
  free_cg_links:
 	free_cg_links(&tmp_cg_links);
  drop_new_super:
-	up_write(&sb->s_umount);
-	deactivate_super(sb);
+	deactivate_locked_super(sb);
 	return ret;
 }
 
-- 
GitLab


From c96f58573778ddf96ff67108a635f3f642ea63d3 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:35:04 -0400
Subject: [PATCH 1233/1421] Fix a leak in failure exit in 9p ->get_sb()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/9p/vfs_super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 0d29a57c63e..ab5547ff29a 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -156,6 +156,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 
 	root = d_alloc_root(inode);
 	if (!root) {
+		iput(inode);
 		retval = -ENOMEM;
 		goto release_sb;
 	}
-- 
GitLab


From 265e771e8197cdb22a1e2556663173fb62c9cd91 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:36:04 -0400
Subject: [PATCH 1234/1421] Fix deadlock in ipathfs ->get_sb()

forgot to unlock superblock before calling deactivate_super()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/infiniband/hw/ipath/ipath_fs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 8dc2bb78160..b3684060465 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -347,7 +347,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data,
 		spin_unlock_irqrestore(&ipath_devs_lock, flags);
 		ret = create_device_files(sb, dd);
 		if (ret) {
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			goto bail;
 		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
-- 
GitLab


From a731d12d6ddd1e703770cacb5dfecb155b03ee06 Mon Sep 17 00:00:00 2001
From: Joel Becker <Joel.Becker@oracle.com>
Date: Mon, 6 Apr 2009 16:43:42 -0700
Subject: [PATCH 1235/1421] ocfs2: Use nd_set_link().

ocfs2 was hand-calling vfs_follow_link(), but there's no point to that.
Let's use page_follow_link_light() and nd_set_link().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ocfs2/symlink.c | 77 ++++++++++++++++++++++------------------------
 1 file changed, 37 insertions(+), 40 deletions(-)

diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index ed0a0cfd68d..579dd1b1110 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -39,6 +39,7 @@
 #include <linux/slab.h>
 #include <linux/pagemap.h>
 #include <linux/utsname.h>
+#include <linux/namei.h>
 
 #define MLOG_MASK_PREFIX ML_NAMEI
 #include <cluster/masklog.h>
@@ -54,26 +55,6 @@
 
 #include "buffer_head_io.h"
 
-static char *ocfs2_page_getlink(struct dentry * dentry,
-				struct page **ppage);
-static char *ocfs2_fast_symlink_getlink(struct inode *inode,
-					struct buffer_head **bh);
-
-/* get the link contents into pagecache */
-static char *ocfs2_page_getlink(struct dentry * dentry,
-				struct page **ppage)
-{
-	struct page * page;
-	struct address_space *mapping = dentry->d_inode->i_mapping;
-	page = read_mapping_page(mapping, 0, NULL);
-	if (IS_ERR(page))
-		goto sync_fail;
-	*ppage = page;
-	return kmap(page);
-
-sync_fail:
-	return (char*)page;
-}
 
 static char *ocfs2_fast_symlink_getlink(struct inode *inode,
 					struct buffer_head **bh)
@@ -128,40 +109,55 @@ out:
 	return ret;
 }
 
-static void *ocfs2_follow_link(struct dentry *dentry,
-			       struct nameidata *nd)
+static void *ocfs2_fast_follow_link(struct dentry *dentry,
+				    struct nameidata *nd)
 {
-	int status;
-	char *link;
+	int status = 0;
+	int len;
+	char *target, *link = ERR_PTR(-ENOMEM);
 	struct inode *inode = dentry->d_inode;
-	struct page *page = NULL;
 	struct buffer_head *bh = NULL;
-	
-	if (ocfs2_inode_is_fast_symlink(inode))
-		link = ocfs2_fast_symlink_getlink(inode, &bh);
-	else
-		link = ocfs2_page_getlink(dentry, &page);
-	if (IS_ERR(link)) {
-		status = PTR_ERR(link);
+
+	mlog_entry_void();
+
+	BUG_ON(!ocfs2_inode_is_fast_symlink(inode));
+	target = ocfs2_fast_symlink_getlink(inode, &bh);
+	if (IS_ERR(target)) {
+		status = PTR_ERR(target);
 		mlog_errno(status);
 		goto bail;
 	}
 
-	status = vfs_follow_link(nd, link);
+	/* Fast symlinks can't be large */
+	len = strlen(target);
+	link = kzalloc(len + 1, GFP_NOFS);
+	if (!link) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto bail;
+	}
+
+	memcpy(link, target, len);
+	nd_set_link(nd, link);
 
 bail:
-	if (page) {
-		kunmap(page);
-		page_cache_release(page);
-	}
 	brelse(bh);
 
-	return ERR_PTR(status);
+	mlog_exit(status);
+	return status ? ERR_PTR(status) : link;
+}
+
+static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+	char *link = cookie;
+
+	kfree(link);
 }
 
 const struct inode_operations ocfs2_symlink_inode_operations = {
 	.readlink	= page_readlink,
-	.follow_link	= ocfs2_follow_link,
+	.follow_link	= page_follow_link_light,
+	.put_link	= page_put_link,
 	.getattr	= ocfs2_getattr,
 	.setattr	= ocfs2_setattr,
 	.setxattr	= generic_setxattr,
@@ -171,7 +167,8 @@ const struct inode_operations ocfs2_symlink_inode_operations = {
 };
 const struct inode_operations ocfs2_fast_symlink_inode_operations = {
 	.readlink	= ocfs2_readlink,
-	.follow_link	= ocfs2_follow_link,
+	.follow_link	= ocfs2_fast_follow_link,
+	.put_link	= ocfs2_fast_put_link,
 	.getattr	= ocfs2_getattr,
 	.setattr	= ocfs2_setattr,
 	.setxattr	= generic_setxattr,
-- 
GitLab


From c490d79bb70c549e096099576b1df40a8810b0d8 Mon Sep 17 00:00:00 2001
From: "npiggin@suse.de" <npiggin@suse.de>
Date: Sun, 26 Apr 2009 20:25:53 +1000
Subject: [PATCH 1236/1421] fs: dcache fix LRU ordering

Fix ordering of LRU when moving referenced dentries to the head of the list
(they should go to the head of the list in the same order as they were found
from the tail, rather than reverse order).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/dcache.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 1fcffebfb44..75659a6fd1f 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -481,7 +481,7 @@ restart:
 			if ((flags & DCACHE_REFERENCED)
 				&& (dentry->d_flags & DCACHE_REFERENCED)) {
 				dentry->d_flags &= ~DCACHE_REFERENCED;
-				list_move_tail(&dentry->d_lru, &referenced);
+				list_move(&dentry->d_lru, &referenced);
 				spin_unlock(&dentry->d_lock);
 			} else {
 				list_move_tail(&dentry->d_lru, &tmp);
-- 
GitLab


From 774e33e70b2bffa8c602d22a5d27c0061a0039cc Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sun, 26 Apr 2009 14:51:17 +0200
Subject: [PATCH 1237/1421] ROMFS: romfs_dev_read() error ignored

romfs_dev_read() may return -EIO, but ret is unsigned, so the errorpath
isn't taken.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/romfs/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index c53b5ef8a02..4ab3c03d8f9 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -298,7 +298,8 @@ static struct inode *romfs_iget(struct super_block *sb, unsigned long pos)
 	struct romfs_inode ri;
 	struct inode *i;
 	unsigned long nlen;
-	unsigned nextfh, ret;
+	unsigned nextfh;
+	int ret;
 	umode_t mode;
 
 	/* we might have to traverse a chain of "hard link" file entries to get
-- 
GitLab


From db6c1fbb92eeb4cb52c6133e0c533602f49fc4bd Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 7 Apr 2009 18:07:08 +0200
Subject: [PATCH 1238/1421] romfs: cleanup romfs_fs.h

There's no kernel-only content in it anymore, so move it to header-y
and remove the superflous #ifdef __KERNEL__.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/linux/Kbuild     | 2 +-
 include/linux/romfs_fs.h | 5 -----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index ca9b9b9bd33..3f0eaa397ef 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -138,6 +138,7 @@ header-y += qnxtypes.h
 header-y += radeonfb.h
 header-y += raw.h
 header-y += resource.h
+header-y += romfs_fs.h
 header-y += rose.h
 header-y += serial_reg.h
 header-y += smbno.h
@@ -314,7 +315,6 @@ unifdef-y += irqnr.h
 unifdef-y += reboot.h
 unifdef-y += reiserfs_fs.h
 unifdef-y += reiserfs_xattr.h
-unifdef-y += romfs_fs.h
 unifdef-y += route.h
 unifdef-y += rtc.h
 unifdef-y += rtnetlink.h
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
index e20bbf9eb36..c490fbc43fe 100644
--- a/include/linux/romfs_fs.h
+++ b/include/linux/romfs_fs.h
@@ -53,9 +53,4 @@ struct romfs_inode {
 #define ROMFH_PAD (ROMFH_SIZE-1)
 #define ROMFH_MASK (~ROMFH_PAD)
 
-#ifdef __KERNEL__
-
-/* Not much now */
-
-#endif /* __KERNEL__ */
 #endif
-- 
GitLab


From ddbaaf3024d764ced700efb2d818709b90ea6fdd Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Apr 2009 20:14:57 -0400
Subject: [PATCH 1239/1421] NULL noise in fs/super.c:kill_bdev_super()

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/super.c b/fs/super.c
index a9dc4c33ef4..1943fdf655f 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -922,7 +922,7 @@ void kill_block_super(struct super_block *sb)
 	struct block_device *bdev = sb->s_bdev;
 	fmode_t mode = sb->s_mode;
 
-	bdev->bd_super = 0;
+	bdev->bd_super = NULL;
 	generic_shutdown_super(sb);
 	sync_blockdev(bdev);
 	close_bdev_exclusive(bdev, mode);
-- 
GitLab


From 6b3304b531704711286c3359b06922b83fdba015 Mon Sep 17 00:00:00 2001
From: Manish Katiyar <mkatiyar@gmail.com>
Date: Tue, 31 Mar 2009 19:35:54 +0530
Subject: [PATCH 1240/1421] Make checkpatch.pl shut up on fs/inode.c

Code Quality According To Mingo(tm) has been vastly improved,
no code has been damaged^Wchanged^Wdamaged.

[commit message rewritten -- AV]

Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/inode.c | 81 +++++++++++++++++++++++-------------------------------
 1 file changed, 35 insertions(+), 46 deletions(-)

diff --git a/fs/inode.c b/fs/inode.c
index 6ad14a1cd8c..0571983755d 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -99,7 +99,7 @@ static DEFINE_MUTEX(iprune_mutex);
  */
 struct inodes_stat_t inodes_stat;
 
-static struct kmem_cache * inode_cachep __read_mostly;
+static struct kmem_cache *inode_cachep __read_mostly;
 
 static void wake_up_inode(struct inode *inode)
 {
@@ -124,7 +124,7 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
 	static struct inode_operations empty_iops;
 	static const struct file_operations empty_fops;
 
-	struct address_space * const mapping = &inode->i_data;
+	struct address_space *const mapping = &inode->i_data;
 
 	inode->i_sb = sb;
 	inode->i_blkbits = sb->s_blocksize_bits;
@@ -216,7 +216,7 @@ static struct inode *alloc_inode(struct super_block *sb)
 	return NULL;
 }
 
-void destroy_inode(struct inode *inode) 
+void destroy_inode(struct inode *inode)
 {
 	BUG_ON(inode_has_buffers(inode));
 	security_inode_free(inode);
@@ -252,12 +252,11 @@ void inode_init_once(struct inode *inode)
 	mutex_init(&inode->inotify_mutex);
 #endif
 }
-
 EXPORT_SYMBOL(inode_init_once);
 
 static void init_once(void *foo)
 {
-	struct inode * inode = (struct inode *) foo;
+	struct inode *inode = (struct inode *) foo;
 
 	inode_init_once(inode);
 }
@@ -265,7 +264,7 @@ static void init_once(void *foo)
 /*
  * inode_lock must be held
  */
-void __iget(struct inode * inode)
+void __iget(struct inode *inode)
 {
 	if (atomic_read(&inode->i_count)) {
 		atomic_inc(&inode->i_count);
@@ -289,7 +288,7 @@ void clear_inode(struct inode *inode)
 {
 	might_sleep();
 	invalidate_inode_buffers(inode);
-       
+
 	BUG_ON(inode->i_data.nrpages);
 	BUG_ON(!(inode->i_state & I_FREEING));
 	BUG_ON(inode->i_state & I_CLEAR);
@@ -303,7 +302,6 @@ void clear_inode(struct inode *inode)
 		cd_forget(inode);
 	inode->i_state = I_CLEAR;
 }
-
 EXPORT_SYMBOL(clear_inode);
 
 /*
@@ -351,8 +349,8 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
 
 	next = head->next;
 	for (;;) {
-		struct list_head * tmp = next;
-		struct inode * inode;
+		struct list_head *tmp = next;
+		struct inode *inode;
 
 		/*
 		 * We can reschedule here without worrying about the list's
@@ -391,7 +389,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
  *	fails because there are busy inodes then a non zero value is returned.
  *	If the discard is successful all the inodes have been discarded.
  */
-int invalidate_inodes(struct super_block * sb)
+int invalidate_inodes(struct super_block *sb)
 {
 	int busy;
 	LIST_HEAD(throw_away);
@@ -407,7 +405,6 @@ int invalidate_inodes(struct super_block * sb)
 
 	return busy;
 }
-
 EXPORT_SYMBOL(invalidate_inodes);
 
 static int can_unuse(struct inode *inode)
@@ -504,7 +501,7 @@ static int shrink_icache_memory(int nr, gfp_t gfp_mask)
 		 * Nasty deadlock avoidance.  We may hold various FS locks,
 		 * and we don't want to recurse into the FS that called us
 		 * in clear_inode() and friends..
-	 	 */
+		 */
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
 		prune_icache(nr);
@@ -524,10 +521,13 @@ static void __wait_on_freeing_inode(struct inode *inode);
  * by hand after calling find_inode now! This simplifies iunique and won't
  * add any additional branch in the common code.
  */
-static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data)
+static struct inode *find_inode(struct super_block *sb,
+				struct hlist_head *head,
+				int (*test)(struct inode *, void *),
+				void *data)
 {
 	struct hlist_node *node;
-	struct inode * inode = NULL;
+	struct inode *inode = NULL;
 
 repeat:
 	hlist_for_each_entry(inode, node, head, i_hash) {
@@ -548,10 +548,11 @@ repeat:
  * find_inode_fast is the fast path version of find_inode, see the comment at
  * iget_locked for details.
  */
-static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino)
+static struct inode *find_inode_fast(struct super_block *sb,
+				struct hlist_head *head, unsigned long ino)
 {
 	struct hlist_node *node;
-	struct inode * inode = NULL;
+	struct inode *inode = NULL;
 
 repeat:
 	hlist_for_each_entry(inode, node, head, i_hash) {
@@ -631,10 +632,10 @@ struct inode *new_inode(struct super_block *sb)
 	 * here to attempt to avoid that.
 	 */
 	static unsigned int last_ino;
-	struct inode * inode;
+	struct inode *inode;
 
 	spin_lock_prefetch(&inode_lock);
-	
+
 	inode = alloc_inode(sb);
 	if (inode) {
 		spin_lock(&inode_lock);
@@ -645,7 +646,6 @@ struct inode *new_inode(struct super_block *sb)
 	}
 	return inode;
 }
-
 EXPORT_SYMBOL(new_inode);
 
 void unlock_new_inode(struct inode *inode)
@@ -674,7 +674,6 @@ void unlock_new_inode(struct inode *inode)
 	inode->i_state &= ~(I_LOCK|I_NEW);
 	wake_up_inode(inode);
 }
-
 EXPORT_SYMBOL(unlock_new_inode);
 
 /*
@@ -683,13 +682,17 @@ EXPORT_SYMBOL(unlock_new_inode);
  * We no longer cache the sb_flags in i_flags - see fs.h
  *	-- rmk@arm.uk.linux.org
  */
-static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data)
+static struct inode *get_new_inode(struct super_block *sb,
+				struct hlist_head *head,
+				int (*test)(struct inode *, void *),
+				int (*set)(struct inode *, void *),
+				void *data)
 {
-	struct inode * inode;
+	struct inode *inode;
 
 	inode = alloc_inode(sb);
 	if (inode) {
-		struct inode * old;
+		struct inode *old;
 
 		spin_lock(&inode_lock);
 		/* We released the lock, so.. */
@@ -731,13 +734,14 @@ set_failed:
  * get_new_inode_fast is the fast path version of get_new_inode, see the
  * comment at iget_locked for details.
  */
-static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino)
+static struct inode *get_new_inode_fast(struct super_block *sb,
+				struct hlist_head *head, unsigned long ino)
 {
-	struct inode * inode;
+	struct inode *inode;
 
 	inode = alloc_inode(sb);
 	if (inode) {
-		struct inode * old;
+		struct inode *old;
 
 		spin_lock(&inode_lock);
 		/* We released the lock, so.. */
@@ -823,7 +827,6 @@ struct inode *igrab(struct inode *inode)
 	spin_unlock(&inode_lock);
 	return inode;
 }
-
 EXPORT_SYMBOL(igrab);
 
 /**
@@ -924,7 +927,6 @@ struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval,
 
 	return ifind(sb, head, test, data, 0);
 }
-
 EXPORT_SYMBOL(ilookup5_nowait);
 
 /**
@@ -953,7 +955,6 @@ struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
 
 	return ifind(sb, head, test, data, 1);
 }
-
 EXPORT_SYMBOL(ilookup5);
 
 /**
@@ -976,7 +977,6 @@ struct inode *ilookup(struct super_block *sb, unsigned long ino)
 
 	return ifind_fast(sb, head, ino);
 }
-
 EXPORT_SYMBOL(ilookup);
 
 /**
@@ -1015,7 +1015,6 @@ struct inode *iget5_locked(struct super_block *sb, unsigned long hashval,
 	 */
 	return get_new_inode(sb, head, test, set, data);
 }
-
 EXPORT_SYMBOL(iget5_locked);
 
 /**
@@ -1047,7 +1046,6 @@ struct inode *iget_locked(struct super_block *sb, unsigned long ino)
 	 */
 	return get_new_inode_fast(sb, head, ino);
 }
-
 EXPORT_SYMBOL(iget_locked);
 
 int insert_inode_locked(struct inode *inode)
@@ -1076,7 +1074,6 @@ int insert_inode_locked(struct inode *inode)
 		iput(old);
 	}
 }
-
 EXPORT_SYMBOL(insert_inode_locked);
 
 int insert_inode_locked4(struct inode *inode, unsigned long hashval,
@@ -1106,7 +1103,6 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval,
 		iput(old);
 	}
 }
-
 EXPORT_SYMBOL(insert_inode_locked4);
 
 /**
@@ -1124,7 +1120,6 @@ void __insert_inode_hash(struct inode *inode, unsigned long hashval)
 	hlist_add_head(&inode->i_hash, head);
 	spin_unlock(&inode_lock);
 }
-
 EXPORT_SYMBOL(__insert_inode_hash);
 
 /**
@@ -1139,7 +1134,6 @@ void remove_inode_hash(struct inode *inode)
 	hlist_del_init(&inode->i_hash);
 	spin_unlock(&inode_lock);
 }
-
 EXPORT_SYMBOL(remove_inode_hash);
 
 /*
@@ -1187,7 +1181,6 @@ void generic_delete_inode(struct inode *inode)
 	BUG_ON(inode->i_state != I_CLEAR);
 	destroy_inode(inode);
 }
-
 EXPORT_SYMBOL(generic_delete_inode);
 
 static void generic_forget_inode(struct inode *inode)
@@ -1237,12 +1230,11 @@ void generic_drop_inode(struct inode *inode)
 	else
 		generic_forget_inode(inode);
 }
-
 EXPORT_SYMBOL_GPL(generic_drop_inode);
 
 /*
  * Called when we're dropping the last reference
- * to an inode. 
+ * to an inode.
  *
  * Call the FS "drop()" function, defaulting to
  * the legacy UNIX filesystem behaviour..
@@ -1262,7 +1254,7 @@ static inline void iput_final(struct inode *inode)
 }
 
 /**
- *	iput	- put an inode 
+ *	iput	- put an inode
  *	@inode: inode to put
  *
  *	Puts an inode, dropping its usage count. If the inode use count hits
@@ -1279,7 +1271,6 @@ void iput(struct inode *inode)
 			iput_final(inode);
 	}
 }
-
 EXPORT_SYMBOL(iput);
 
 /**
@@ -1290,10 +1281,10 @@ EXPORT_SYMBOL(iput);
  *	Returns the block number on the device holding the inode that
  *	is the disk block number for the block of the file requested.
  *	That is, asked for block 4 of inode 1 the function will return the
- *	disk block relative to the disk start that holds that block of the 
+ *	disk block relative to the disk start that holds that block of the
  *	file.
  */
-sector_t bmap(struct inode * inode, sector_t block)
+sector_t bmap(struct inode *inode, sector_t block)
 {
 	sector_t res = 0;
 	if (inode->i_mapping->a_ops->bmap)
@@ -1425,7 +1416,6 @@ void file_update_time(struct file *file)
 		mark_inode_dirty_sync(inode);
 	mnt_drop_write(file->f_path.mnt);
 }
-
 EXPORT_SYMBOL(file_update_time);
 
 int inode_needs_sync(struct inode *inode)
@@ -1436,7 +1426,6 @@ int inode_needs_sync(struct inode *inode)
 		return 1;
 	return 0;
 }
-
 EXPORT_SYMBOL(inode_needs_sync);
 
 int inode_wait(void *word)
-- 
GitLab


From e24977d45f45d1675e050dc1a0aaf4bfc4ca9866 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 2 Apr 2009 21:17:03 -0400
Subject: [PATCH 1241/1421] Reduce path_lookup() abuses

... use kern_path() where possible

[folded a fix from rdd]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/scsi/osd/osd_uld.c | 20 ++++++++++----------
 fs/gfs2/ops_fstype.c       |  8 ++++----
 security/tomoyo/common.c   |  6 +++---
 security/tomoyo/realpath.c | 16 ++++++++--------
 4 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index f644c9571ea..22b59e13ba8 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -173,26 +173,26 @@ static const struct file_operations osd_fops = {
 	.unlocked_ioctl = osd_uld_ioctl,
 };
 
-struct osd_dev *osduld_path_lookup(const char *path)
+struct osd_dev *osduld_path_lookup(const char *name)
 {
-	struct nameidata nd;
+	struct path path;
 	struct inode *inode;
 	struct cdev *cdev;
 	struct osd_uld_device *uninitialized_var(oud);
 	int error;
 
-	if (!path || !*path) {
+	if (!name || !*name) {
 		OSD_ERR("Mount with !path || !*path\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+	error = kern_path(name, LOOKUP_FOLLOW, &path);
 	if (error) {
-		OSD_ERR("path_lookup of %s faild=>%d\n", path, error);
+		OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
 		return ERR_PTR(error);
 	}
 
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 	error = -EINVAL; /* Not the right device e.g osd_uld_device */
 	if (!S_ISCHR(inode->i_mode)) {
 		OSD_DEBUG("!S_ISCHR()\n");
@@ -202,15 +202,15 @@ struct osd_dev *osduld_path_lookup(const char *path)
 	cdev = inode->i_cdev;
 	if (!cdev) {
 		OSD_ERR("Before mounting an OSD Based filesystem\n");
-		OSD_ERR("  user-mode must open+close the %s device\n", path);
-		OSD_ERR("  Example: bash: echo < %s\n", path);
+		OSD_ERR("  user-mode must open+close the %s device\n", name);
+		OSD_ERR("  Example: bash: echo < %s\n", name);
 		goto out;
 	}
 
 	/* The Magic wand. Is it our char-dev */
 	/* TODO: Support sg devices */
 	if (cdev->owner != THIS_MODULE) {
-		OSD_ERR("Error mounting %s - is not an OSD device\n", path);
+		OSD_ERR("Error mounting %s - is not an OSD device\n", name);
 		goto out;
 	}
 
@@ -220,7 +220,7 @@ struct osd_dev *osduld_path_lookup(const char *path)
 	error = 0;
 
 out:
-	path_put(&nd.path);
+	path_put(&path);
 	return error ? ERR_PTR(error) : &oud->od;
 }
 EXPORT_SYMBOL(osduld_path_lookup);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 650a730707b..1ff9473ea75 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1282,21 +1282,21 @@ static int gfs2_get_sb(struct file_system_type *fs_type, int flags,
 static struct super_block *get_gfs2_sb(const char *dev_name)
 {
 	struct super_block *sb;
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
+	error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
 	if (error) {
 		printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n",
 		       dev_name, error);
 		return NULL;
 	}
-	sb = nd.path.dentry->d_inode->i_sb;
+	sb = path.dentry->d_inode->i_sb;
 	if (sb && (sb->s_type == &gfs2_fs_type))
 		atomic_inc(&sb->s_active);
 	else
 		sb = NULL;
-	path_put(&nd.path);
+	path_put(&path);
 	return sb;
 }
 
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index d4d41b3efc7..ddfb9cccf46 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -1720,14 +1720,14 @@ static bool tomoyo_policy_loader_exists(void)
 	 * policies are not loaded yet.
 	 * Thus, let do_execve() call this function everytime.
 	 */
-	struct nameidata nd;
+	struct path path;
 
-	if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) {
+	if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
 		printk(KERN_INFO "Not activating Mandatory Access Control now "
 		       "since %s doesn't exist.\n", tomoyo_loader);
 		return false;
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return true;
 }
 
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index bf8e2b45168..40927a84cb6 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -165,11 +165,11 @@ char *tomoyo_realpath_from_path(struct path *path)
  */
 char *tomoyo_realpath(const char *pathname)
 {
-	struct nameidata nd;
+	struct path path;
 
-	if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) {
-		char *buf = tomoyo_realpath_from_path(&nd.path);
-		path_put(&nd.path);
+	if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
+		char *buf = tomoyo_realpath_from_path(&path);
+		path_put(&path);
 		return buf;
 	}
 	return NULL;
@@ -184,11 +184,11 @@ char *tomoyo_realpath(const char *pathname)
  */
 char *tomoyo_realpath_nofollow(const char *pathname)
 {
-	struct nameidata nd;
+	struct path path;
 
-	if (pathname && path_lookup(pathname, 0, &nd) == 0) {
-		char *buf = tomoyo_realpath_from_path(&nd.path);
-		path_put(&nd.path);
+	if (pathname && kern_path(pathname, 0, &path) == 0) {
+		char *buf = tomoyo_realpath_from_path(&path);
+		path_put(&path);
 		return buf;
 	}
 	return NULL;
-- 
GitLab


From a44ddbb6d8a8ffe4e34e417048dfdd8f3dd1de4f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 6 Apr 2009 09:38:49 -0400
Subject: [PATCH 1242/1421] Make open_exec() and sys_uselib() use may_open(),
 instead of duplicating its parts

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 639177b0eea..41ae8e0de72 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -126,11 +126,7 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
 	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
 		goto exit;
 
-	error = inode_permission(nd.path.dentry->d_inode,
-				 MAY_READ | MAY_EXEC | MAY_OPEN);
-	if (error)
-		goto exit;
-	error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN);
+	error = may_open(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN, 0);
 	if (error)
 		goto exit;
 
@@ -677,10 +673,7 @@ struct file *open_exec(const char *name)
 	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
 		goto out_path_put;
 
-	err = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_OPEN);
-	if (err)
-		goto out_path_put;
-	err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN);
+	err = may_open(&nd.path, MAY_EXEC | MAY_OPEN, 0);
 	if (err)
 		goto out_path_put;
 
-- 
GitLab


From 6e8341a11eb21826b7192d0bb88cb5b44900a9af Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 6 Apr 2009 11:16:22 -0400
Subject: [PATCH 1243/1421] Switch open_exec() and sys_uselib() to
 do_open_filp()

... and make path_lookup_open() static

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c             | 72 +++++++++++++++----------------------------
 fs/namei.c            | 13 ++++----
 fs/open.c             |  2 +-
 include/linux/fs.h    |  2 +-
 include/linux/namei.h |  1 -
 5 files changed, 34 insertions(+), 56 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 41ae8e0de72..895823d0149 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -105,36 +105,28 @@ static inline void put_binfmt(struct linux_binfmt * fmt)
 SYSCALL_DEFINE1(uselib, const char __user *, library)
 {
 	struct file *file;
-	struct nameidata nd;
 	char *tmp = getname(library);
 	int error = PTR_ERR(tmp);
 
-	if (!IS_ERR(tmp)) {
-		error = path_lookup_open(AT_FDCWD, tmp,
-					 LOOKUP_FOLLOW, &nd,
-					 FMODE_READ|FMODE_EXEC);
-		putname(tmp);
-	}
-	if (error)
+	if (IS_ERR(tmp))
+		goto out;
+
+	file = do_filp_open(AT_FDCWD, tmp,
+				O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+				MAY_READ | MAY_EXEC | MAY_OPEN);
+	putname(tmp);
+	error = PTR_ERR(file);
+	if (IS_ERR(file))
 		goto out;
 
 	error = -EINVAL;
-	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+	if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
 		goto exit;
 
 	error = -EACCES;
-	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
-		goto exit;
-
-	error = may_open(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN, 0);
-	if (error)
+	if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
 		goto exit;
 
-	file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
-	error = PTR_ERR(file);
-	if (IS_ERR(file))
-		goto out;
-
 	fsnotify_open(file->f_path.dentry);
 
 	error = -ENOEXEC;
@@ -156,13 +148,10 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
 		}
 		read_unlock(&binfmt_lock);
 	}
+exit:
 	fput(file);
 out:
   	return error;
-exit:
-	release_open_intent(&nd);
-	path_put(&nd.path);
-	goto out;
 }
 
 #ifdef CONFIG_MMU
@@ -657,44 +646,33 @@ EXPORT_SYMBOL(setup_arg_pages);
 
 struct file *open_exec(const char *name)
 {
-	struct nameidata nd;
 	struct file *file;
 	int err;
 
-	err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
-				FMODE_READ|FMODE_EXEC);
-	if (err)
+	file = do_filp_open(AT_FDCWD, name,
+				O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+				MAY_EXEC | MAY_OPEN);
+	if (IS_ERR(file))
 		goto out;
 
 	err = -EACCES;
-	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
-		goto out_path_put;
-
-	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
-		goto out_path_put;
-
-	err = may_open(&nd.path, MAY_EXEC | MAY_OPEN, 0);
-	if (err)
-		goto out_path_put;
+	if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
+		goto exit;
 
-	file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
-	if (IS_ERR(file))
-		return file;
+	if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
+		goto exit;
 
 	fsnotify_open(file->f_path.dentry);
 
 	err = deny_write_access(file);
-	if (err) {
-		fput(file);
-		goto out;
-	}
+	if (err)
+		goto exit;
 
+out:
 	return file;
 
- out_path_put:
-	release_open_intent(&nd);
-	path_put(&nd.path);
- out:
+exit:
+	fput(file);
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL(open_exec);
diff --git a/fs/namei.c b/fs/namei.c
index 78f253cd2d4..967c3db9272 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1130,8 +1130,8 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
  * @nd: pointer to nameidata
  * @open_flags: open intent flags
  */
-int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags,
-		struct nameidata *nd, int open_flags)
+static int path_lookup_open(int dfd, const char *name,
+		unsigned int lookup_flags, struct nameidata *nd, int open_flags)
 {
 	struct file *filp = get_empty_filp();
 	int err;
@@ -1637,18 +1637,19 @@ static int open_will_write_to_fs(int flag, struct inode *inode)
  * open_to_namei_flags() for more details.
  */
 struct file *do_filp_open(int dfd, const char *pathname,
-		int open_flag, int mode)
+		int open_flag, int mode, int acc_mode)
 {
 	struct file *filp;
 	struct nameidata nd;
-	int acc_mode, error;
+	int error;
 	struct path path;
 	struct dentry *dir;
 	int count = 0;
 	int will_write;
 	int flag = open_to_namei_flags(open_flag);
 
-	acc_mode = MAY_OPEN | ACC_MODE(flag);
+	if (!acc_mode)
+		acc_mode = MAY_OPEN | ACC_MODE(flag);
 
 	/* O_TRUNC implies we need access checks for write permissions */
 	if (flag & O_TRUNC)
@@ -1869,7 +1870,7 @@ do_link:
  */
 struct file *filp_open(const char *filename, int flags, int mode)
 {
-	return do_filp_open(AT_FDCWD, filename, flags, mode);
+	return do_filp_open(AT_FDCWD, filename, flags, mode, 0);
 }
 EXPORT_SYMBOL(filp_open);
 
diff --git a/fs/open.c b/fs/open.c
index 377eb25b6ab..bdfbf03615a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1033,7 +1033,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode)
 	if (!IS_ERR(tmp)) {
 		fd = get_unused_fd_flags(flags);
 		if (fd >= 0) {
-			struct file *f = do_filp_open(dfd, tmp, flags, mode);
+			struct file *f = do_filp_open(dfd, tmp, flags, mode, 0);
 			if (IS_ERR(f)) {
 				put_unused_fd(fd);
 				fd = PTR_ERR(f);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 11484d08042..ed788426f46 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2118,7 +2118,7 @@ extern struct file *create_write_pipe(int flags);
 extern void free_write_pipe(struct file *);
 
 extern struct file *do_filp_open(int dfd, const char *pathname,
-		int open_flag, int mode);
+		int open_flag, int mode, int acc_mode);
 extern int may_open(struct path *, int, int);
 
 extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
diff --git a/include/linux/namei.h b/include/linux/namei.h
index fc2e0357987..518098fe63a 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -69,7 +69,6 @@ extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
 
-extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
 extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
 		int (*open)(struct inode *, struct file *));
 extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
-- 
GitLab


From f9dbd05bc97d1d4f17c2057612f6a8e4dbd039e0 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 19:56:21 -0400
Subject: [PATCH 1244/1421] switch ufs directories to ufs_sync_file()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ufs/dir.c  | 2 +-
 fs/ufs/file.c | 2 +-
 fs/ufs/ufs.h  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index dbbbc466876..6321b797061 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -666,6 +666,6 @@ not_empty:
 const struct file_operations ufs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= ufs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= ufs_sync_file,
 	.llseek		= generic_file_llseek,
 };
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index 625ef17c6f8..2bd3a161571 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -30,7 +30,7 @@
 #include "ufs.h"
 
 
-static int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 {
 	struct inode *inode = dentry->d_inode;
 	int err;
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 69b3427d788..d0c4acd4f1f 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -98,8 +98,8 @@ extern void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de,
 /* file.c */
 extern const struct inode_operations ufs_file_inode_operations;
 extern const struct file_operations ufs_file_operations;
-
 extern const struct address_space_operations ufs_aops;
+extern int ufs_sync_file(struct file *, struct dentry *, int);
 
 /* ialloc.c */
 extern void ufs_free_inode (struct inode *inode);
-- 
GitLab


From 2a32cebd6cbcc43996c3e2d114fa32ba1e71192a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 8 May 2009 16:05:57 -0400
Subject: [PATCH 1245/1421] Fix races around the access to ->s_options

Put generic_show_options read access to s_options under rcu_read_lock,
split save_mount_options() into "we are setting it the first time"
(uses in foo_fill_super()) and "we are relacing and freeing the old one",
synchronize_rcu() before kfree() in the latter.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/isdn/capi/capifs.c |  3 +--
 fs/affs/super.c            |  3 +--
 fs/afs/super.c             |  4 ++--
 fs/hpfs/super.c            |  3 +--
 fs/namespace.c             | 21 ++++++++++++++++++---
 fs/reiserfs/super.c        |  3 +--
 include/linux/fs.h         |  1 +
 7 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index b129409925a..8f9f3b5a3e8 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -75,8 +75,7 @@ static int capifs_remount(struct super_block *s, int *flags, char *data)
 		}
 	}
 
-	kfree(s->s_options);
-	s->s_options = new_opt;
+	replace_mount_options(s, new_opt);
 
 	config.setuid  = setuid;
 	config.setgid  = setgid;
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 5ce695e707f..63f5183f263 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -507,8 +507,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 		kfree(new_opts);
 		return -EINVAL;
 	}
-	kfree(sb->s_options);
-	sb->s_options = new_opts;
+	replace_mount_options(sb, new_opts);
 
 	sbi->s_flags = mount_flags;
 	sbi->s_mode  = mode;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 2753f16dd31..76828e5f8a3 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -408,17 +408,17 @@ static int afs_get_sb(struct file_system_type *fs_type,
 			deactivate_locked_super(sb);
 			goto error;
 		}
-		sb->s_options = new_opts;
+		save_mount_options(sb, new_opts);
 		sb->s_flags |= MS_ACTIVE;
 	} else {
 		_debug("reuse");
-		kfree(new_opts);
 		ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
 	}
 
 	simple_set_mnt(mnt, sb);
 	afs_put_volume(params.volume);
 	afs_put_cell(params.cell);
+	kfree(new_opts);
 	_leave(" = 0 [%p]", sb);
 	return 0;
 
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index fecf402d7b8..fc77965be84 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -423,8 +423,7 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 
 	if (!(*flags & MS_RDONLY)) mark_dirty(s);
 
-	kfree(s->s_options);
-	s->s_options = new_opts;
+	replace_mount_options(s, new_opts);
 
 	return 0;
 
diff --git a/fs/namespace.c b/fs/namespace.c
index 0d2003fb437..134d494158d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -695,12 +695,16 @@ static inline void mangle(struct seq_file *m, const char *s)
  */
 int generic_show_options(struct seq_file *m, struct vfsmount *mnt)
 {
-	const char *options = mnt->mnt_sb->s_options;
+	const char *options;
+
+	rcu_read_lock();
+	options = rcu_dereference(mnt->mnt_sb->s_options);
 
 	if (options != NULL && options[0]) {
 		seq_putc(m, ',');
 		mangle(m, options);
 	}
+	rcu_read_unlock();
 
 	return 0;
 }
@@ -721,11 +725,22 @@ EXPORT_SYMBOL(generic_show_options);
  */
 void save_mount_options(struct super_block *sb, char *options)
 {
-	kfree(sb->s_options);
-	sb->s_options = kstrdup(options, GFP_KERNEL);
+	BUG_ON(sb->s_options);
+	rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL));
 }
 EXPORT_SYMBOL(save_mount_options);
 
+void replace_mount_options(struct super_block *sb, char *options)
+{
+	char *old = sb->s_options;
+	rcu_assign_pointer(sb->s_options, options);
+	if (old) {
+		synchronize_rcu();
+		kfree(old);
+	}
+}
+EXPORT_SYMBOL(replace_mount_options);
+
 #ifdef CONFIG_PROC_FS
 /* iterator */
 static void *m_start(struct seq_file *m, loff_t *pos)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d444fe0013a..1215a4f50cd 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1316,8 +1316,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 	}
 
 out_ok:
-	kfree(s->s_options);
-	s->s_options = new_opts;
+	replace_mount_options(s, new_opts);
 	return 0;
 
 out_err:
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ed788426f46..3b534e527e0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2368,6 +2368,7 @@ extern void file_update_time(struct file *file);
 
 extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt);
 extern void save_mount_options(struct super_block *sb, char *options);
+extern void replace_mount_options(struct super_block *sb, char *options);
 
 static inline ino_t parent_ino(struct dentry *dentry)
 {
-- 
GitLab


From b0c4f3222c7406f0aee9d52b7d604a1d36108463 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 8 May 2009 16:23:30 -0400
Subject: [PATCH 1246/1421] Fix the race between capifs remount and node
 creation

we don't want to deal with half-updated config

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/isdn/capi/capifs.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index 8f9f3b5a3e8..bff72d81f26 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -75,14 +75,17 @@ static int capifs_remount(struct super_block *s, int *flags, char *data)
 		}
 	}
 
-	replace_mount_options(s, new_opt);
+	mutex_lock(&s->s_root->d_inode->i_mutex);
 
+	replace_mount_options(s, new_opt);
 	config.setuid  = setuid;
 	config.setgid  = setgid;
 	config.uid     = uid;
 	config.gid     = gid;
 	config.mode    = mode;
 
+	mutex_unlock(&s->s_root->d_inode->i_mutex);
+
 	return 0;
 }
 
@@ -153,13 +156,16 @@ void capifs_new_ncci(unsigned int number, dev_t device)
 	if (!inode)
 		return;
 	inode->i_ino = number+2;
+
+	dentry = get_node(number);
+
+	/* config contents is protected by root's i_mutex */
 	inode->i_uid = config.setuid ? config.uid : current_fsuid();
 	inode->i_gid = config.setgid ? config.gid : current_fsgid();
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
 	init_special_inode(inode, S_IFCHR|config.mode, device);
 	//inode->i_op = &capifs_file_inode_operations;
 
-	dentry = get_node(number);
 	if (!IS_ERR(dentry) && !dentry->d_inode)
 		d_instantiate(dentry, inode);
 	mutex_unlock(&capifs_root->d_inode->i_mutex);
-- 
GitLab


From cb1287a82281ab3ddb0768250a46603977075b91 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 17 Apr 2009 20:50:30 -0300
Subject: [PATCH 1247/1421] V4L/DVB (11575): uvcvideo: fix uvc resume failed

Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should
return packet counts allocated originally during uvc resume, instead of zero.

This version uses round down to return packet counts on Linus' suggestions,
or else may lead to buffer destructed if packet size is changed before
calling uvc_alloc_urb_buffers() in this kind of case.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index a95e17329c5..6ce974d7362 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,
 
 	/* Buffers are already allocated, bail out. */
 	if (video->urb_size)
-		return 0;
+		return video->urb_size / psize;
 
 	/* Compute the number of packets. Bulk endpoints might transfer UVC
 	 * payloads accross multiple URBs.
-- 
GitLab


From 171f48e254339548a910867c7a77c4a4d16e7e16 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 30 Apr 2009 21:03:34 -0300
Subject: [PATCH 1248/1421] V4L/DVB (11660): zoran: fix bug when enumerating
 format -1

If someone requests a format at fmt->index == (unsigned)-1 and the first
format in the array doesn't have the requested type then num will still be
-1 when it's compared to fmt->index and there will appear to be a match.

Restructure the loop so this can't happen.  It's simpler this way too.  The
unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin
<roel.kluin@gmail.com> is removed this way too.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran/zoran_driver.c | 28 +++++++++++-------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 092333b1c34..643cccaa1aa 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1863,22 +1863,20 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability
 
 static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
 {
-	int num = -1, i;
-
-	for (i = 0; i < NUM_FORMATS; i++) {
-		if (zoran_formats[i].flags & flag)
-			num++;
-		if (num == fmt->index)
-			break;
+	unsigned int num, i;
+
+	for (num = i = 0; i < NUM_FORMATS; i++) {
+		if (zoran_formats[i].flags & flag && num++ == fmt->index) {
+			strncpy(fmt->description, zoran_formats[i].name,
+				sizeof(fmt->description) - 1);
+			/* fmt struct pre-zeroed, so adding '\0' not neeed */
+			fmt->pixelformat = zoran_formats[i].fourcc;
+			if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
+				fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+			return 0;
+		}
 	}
-	if (fmt->index < 0 /* late, but not too late */  || i == NUM_FORMATS)
-		return -EINVAL;
-
-	strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1);
-	fmt->pixelformat = zoran_formats[i].fourcc;
-	if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
-		fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
-	return 0;
+	return -EINVAL;
 }
 
 static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh,
-- 
GitLab


From 1175d6131f7a89c163227169325ca77a22b18cb2 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 30 Apr 2009 21:03:34 -0300
Subject: [PATCH 1249/1421] V4L/DVB (11661): v4l2-ioctl: Check buffer types
 using g_fmt instead of try_fmt

For a number of different ioctls, the v4l2-ioctl code checks that the
passed buffer type is supported by the driver.  It did this by checking
that the driver defined a method for the try_fmt handler for that buffer
type.  However, try_fmt is optional and a driver might not provide it even
though it does support that type.  So use g_fmt instead, since that isn't
optional.

This should fix a problem with VBI capture with saa7146.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ioctl.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 88f10d6cbc9..feb42073302 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -544,39 +544,39 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type)
 
 	switch (type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (ops->vidioc_try_fmt_vid_cap)
+		if (ops->vidioc_g_fmt_vid_cap)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-		if (ops->vidioc_try_fmt_vid_overlay)
+		if (ops->vidioc_g_fmt_vid_overlay)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		if (ops->vidioc_try_fmt_vid_out)
+		if (ops->vidioc_g_fmt_vid_out)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-		if (ops->vidioc_try_fmt_vid_out_overlay)
+		if (ops->vidioc_g_fmt_vid_out_overlay)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
-		if (ops->vidioc_try_fmt_vbi_cap)
+		if (ops->vidioc_g_fmt_vbi_cap)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		if (ops->vidioc_try_fmt_vbi_out)
+		if (ops->vidioc_g_fmt_vbi_out)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		if (ops->vidioc_try_fmt_sliced_vbi_cap)
+		if (ops->vidioc_g_fmt_sliced_vbi_cap)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		if (ops->vidioc_try_fmt_sliced_vbi_out)
+		if (ops->vidioc_g_fmt_sliced_vbi_out)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_PRIVATE:
-		if (ops->vidioc_try_fmt_type_private)
+		if (ops->vidioc_g_fmt_type_private)
 			return 0;
 		break;
 	}
-- 
GitLab


From 7ecc0cf937e97b6116db09cd13c32467b34c164a Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 30 Apr 2009 21:03:34 -0300
Subject: [PATCH 1250/1421] V4L/DVB (11662): v4l2-ioctl: Clear buffer type
 specific trailing fields/padding

Some ioctls have structs that are a different size depending on what type
of buffer is being used.  If the buffer type leaves a field unused or has
padding space at the end, this space should be zeroed out.

The problems with S_FMT and REQBUFS were original identified and patched by
Marton Nemeth <nm127@freemail.hu>.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ioctl.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index feb42073302..be64a502ea2 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -42,6 +42,12 @@
 			printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
 		} while (0)
 
+/* Zero out the end of the struct pointed to by p.  Everthing after, but
+ * not including, the specified field is cleared. */
+#define CLEAR_AFTER_FIELD(p, field) \
+	memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
+	0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field))
+
 struct std_descr {
 	v4l2_std_id std;
 	const char *descr;
@@ -782,44 +788,53 @@ static long __video_do_ioctl(struct file *file,
 
 		switch (f->type) {
 		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			if (ops->vidioc_s_fmt_vid_cap)
 				ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_s_fmt_vid_overlay)
 				ret = ops->vidioc_s_fmt_vid_overlay(file,
 								    fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			if (ops->vidioc_s_fmt_vid_out)
 				ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_s_fmt_vid_out_overlay)
 				ret = ops->vidioc_s_fmt_vid_out_overlay(file,
 					fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_s_fmt_vbi_cap)
 				ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_s_fmt_vbi_out)
 				ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_s_fmt_sliced_vbi_cap)
 				ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
 									fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_s_fmt_sliced_vbi_out)
 				ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
 									fh, f);
 			break;
 		case V4L2_BUF_TYPE_PRIVATE:
+			/* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
 			if (ops->vidioc_s_fmt_type_private)
 				ret = ops->vidioc_s_fmt_type_private(file,
 								fh, f);
@@ -836,46 +851,55 @@ static long __video_do_ioctl(struct file *file,
 						v4l2_type_names));
 		switch (f->type) {
 		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			if (ops->vidioc_try_fmt_vid_cap)
 				ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
 			if (!ret)
 				v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_try_fmt_vid_overlay)
 				ret = ops->vidioc_try_fmt_vid_overlay(file,
 					fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			if (ops->vidioc_try_fmt_vid_out)
 				ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
 			if (!ret)
 				v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_try_fmt_vid_out_overlay)
 				ret = ops->vidioc_try_fmt_vid_out_overlay(file,
 				       fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_try_fmt_vbi_cap)
 				ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_try_fmt_vbi_out)
 				ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_try_fmt_sliced_vbi_cap)
 				ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
 								fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_try_fmt_sliced_vbi_out)
 				ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
 								fh, f);
 			break;
 		case V4L2_BUF_TYPE_PRIVATE:
+			/* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
 			if (ops->vidioc_try_fmt_type_private)
 				ret = ops->vidioc_try_fmt_type_private(file,
 								fh, f);
@@ -898,6 +922,9 @@ static long __video_do_ioctl(struct file *file,
 		if (ret)
 			break;
 
+		if (p->type < V4L2_BUF_TYPE_PRIVATE)
+			CLEAR_AFTER_FIELD(p, memory);
+
 		ret = ops->vidioc_reqbufs(file, fh, p);
 		dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
 				p->count,
-- 
GitLab


From 52c3d29cfa2fa02f525a01abf28abf48f49801bf Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@linuxtv.org>
Date: Mon, 20 Apr 2009 22:42:00 -0300
Subject: [PATCH 1251/1421] V4L/DVB (11664): cx23885: Frontend wasn't locking
 on HVR-1500

The boards control struct wasn't updated when (presumably) all of the
other drivers migrated from using scode_table to specifying the demod.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-dvb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 0c49a98213c..1dc070da865 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -472,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			static struct xc2028_ctrl ctl = {
 				.fname       = XC2028_DEFAULT_FIRMWARE,
 				.max_len     = 64,
-				.scode_table = XC3028_FE_OREN538,
+				.demod       = XC3028_FE_OREN538,
 			};
 
 			fe = dvb_attach(xc2028_attach,
-- 
GitLab


From 34a7864db1bc6d9ceb466251957fccf90c7106f8 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 07:56:46 -0300
Subject: [PATCH 1252/1421] V4L/DVB (11668): ivtv: fix compiler warning.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-driver.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index b0195e8ee4d..db2ac9a99ac 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -305,14 +305,17 @@ int ivtv_waitq(wait_queue_head_t *waitq)
 /* Generic utility functions */
 int ivtv_msleep_timeout(unsigned int msecs, int intr)
 {
-	int ret;
 	int timeout = msecs_to_jiffies(msecs);
 
 	do {
 		set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
 		timeout = schedule_timeout(timeout);
-		if (intr && (ret = signal_pending(current)))
-			return ret;
+		if (intr) {
+			int ret = signal_pending(current);
+
+			if (ret)
+				return ret;
+		}
 	} while (timeout);
 	return 0;
 }
-- 
GitLab


From 7564f67d5b38eb814e67edd8ba0c70fd8eb475b6 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 08:12:36 -0300
Subject: [PATCH 1253/1421] V4L/DVB (11669): uvc: fix compile warning

The 2.6.30 kernel generates this warning:

uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function

I guess some new warning flag must have been turned on since this warning
didn't appear with older kernels (gcc version 4.3.1). It's also a bogus
warning, but since this code didn't comply to the coding standard anyway
I've modified it to 1) remove the warning and 2) conform to the coding
standard.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_driver.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 399412d7f02..507dc85646b 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1726,14 +1726,17 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
 static int __uvc_resume(struct usb_interface *intf, int reset)
 {
 	struct uvc_device *dev = usb_get_intfdata(intf);
-	int ret;
 
 	uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
 		intf->cur_altsetting->desc.bInterfaceNumber);
 
 	if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
-		if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0)
-			return ret;
+		if (reset) {
+			int ret = uvc_ctrl_resume_device(dev);
+
+			if (ret < 0)
+				return ret;
+		}
 
 		return uvc_status_resume(dev);
 	}
-- 
GitLab


From ec105a42ac397366e05888ea96503ab3b57f79ad Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 11:10:23 -0300
Subject: [PATCH 1254/1421] V4L/DVB (11674): ivtv: fix incorrect bit tests

Found the coccinelle tool.

Thanks-to: Julia Lawall <julia@diku.dk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-ioctl.c | 5 +++--
 drivers/media/video/ivtv/ivtv-irq.c   | 2 +-
 drivers/media/video/ivtv/ivtv-yuv.c   | 3 ++-
 drivers/media/video/ivtv/ivtvfb.c     | 3 ++-
 4 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 4a2d464f055..c342a9fe983 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -180,7 +180,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed)
 
 		/* Wait for any DMA to finish */
 		prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
-		while (itv->i_flags & IVTV_F_I_DMA) {
+		while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
 			got_sig = signal_pending(current);
 			if (got_sig)
 				break;
@@ -1710,7 +1710,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
 			   we are waiting unlock first and later lock again. */
 			mutex_unlock(&itv->serialize_lock);
 			prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE);
-			if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0)
+			if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) &&
+			    !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags))
 				schedule();
 			finish_wait(&itv->event_waitq, &wait);
 			mutex_lock(&itv->serialize_lock);
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index 01c14d2b381..cd9db0bf33b 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -196,7 +196,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
 				bytes_needed, s->name);
 		return -1;
 	}
-	if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) {
+	if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) {
 		IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name);
 		IVTV_WARN("Cause: the application is not reading fast enough.\n");
 	}
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index 7912ed6b72e..c0875378acc 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -1063,7 +1063,8 @@ static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
 	prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
 	/* if no UDMA is pending and no UDMA is in progress, then the DMA
 	   is finished */
-	while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+	while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+	       test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
 		/* don't interrupt if the DMA is in progress but break off
 		   a still pending DMA. */
 		got_sig = signal_pending(current);
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 66e6eb51307..fa6bb85cb4b 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -298,7 +298,8 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
 	prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
 	/* if no UDMA is pending and no UDMA is in progress, then the DMA
 	   is finished */
-	while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+	while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+	       test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
 		/* don't interrupt if the DMA is in progress but break off
 		   a still pending DMA. */
 		got_sig = signal_pending(current);
-- 
GitLab


From dc47b77897b33fca328bd4cd487224808b740ce3 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 11:52:35 -0300
Subject: [PATCH 1255/1421] V4L/DVB (11675): ivtv/radio: fix
 V4L2_TUNER_MODE/V4L2_TUNER_SUB confusion

V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have
been used.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/radio-sf16fmi.c  | 2 +-
 drivers/media/radio/radio-sf16fmr2.c | 2 +-
 drivers/media/video/ivtv/ivtv-gpio.c | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 1dba8f0832a..5cf6c45b91f 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -153,7 +153,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
 	v->rangelow = RSF16_MINFREQ / mult;
 	v->rangehigh = RSF16_MAXFREQ / mult;
-	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 	v->capability = fmi->flags & V4L2_TUNER_CAP_LOW;
 	v->audmode = V4L2_TUNER_MODE_STEREO;
 	v->signal = fmi_getsigstr(fmi);
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index c09ca8600ea..935ff9bcdfc 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -233,7 +233,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
 	v->rangelow = RSF16_MINFREQ / mult;
 	v->rangehigh = RSF16_MAXFREQ / mult;
-	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 	v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
 	v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
 				V4L2_TUNER_MODE_MONO;
diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c
index ceb05bdcaf6..85ac707228e 100644
--- a/drivers/media/video/ivtv/ivtv-gpio.c
+++ b/drivers/media/video/ivtv/ivtv-gpio.c
@@ -190,8 +190,8 @@ static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 
 	mask = itv->card->gpio_audio_detect.mask;
 	if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask))
-		vt->rxsubchans = V4L2_TUNER_MODE_STEREO |
-			V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2;
+		vt->rxsubchans = V4L2_TUNER_SUB_STEREO |
+			V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 	else
 		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
 	return 0;
-- 
GitLab


From e047a0f57dabd57957c9dab744a02da01d445b0a Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 3 May 2009 04:58:04 -0300
Subject: [PATCH 1256/1421] V4L/DVB (11679): cafe_ccic: fix sensor detection

Due to an uninitialized chip.ident field the chip identification failed.

Thanks-to: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 5f582726985..e2d49cdb9d7 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -774,6 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam)
 	ret = __cafe_cam_reset(cam);
 	if (ret)
 		goto out;
+	chip.ident == V4L2_IDENT_NONE;
 	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
 	chip.match.addr = cam->sensor_addr;
 	ret = sensor_call(cam, core, g_chip_ident, &chip);
-- 
GitLab


From 90c69f29cfc436b21a3181f8034f19f74543507a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 5 May 2009 08:08:38 -0300
Subject: [PATCH 1257/1421] V4L/DVB (11680): cafe_ccic: use = instead of == for
 setting a value at a var

/home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init':
/home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: saeed bishara <saeed.bishara@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index e2d49cdb9d7..c4d181dde1c 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -774,7 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam)
 	ret = __cafe_cam_reset(cam);
 	if (ret)
 		goto out;
-	chip.ident == V4L2_IDENT_NONE;
+	chip.ident = V4L2_IDENT_NONE;
 	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
 	chip.match.addr = cam->sensor_addr;
 	ret = sensor_call(cam, core, g_chip_ident, &chip);
-- 
GitLab


From 843382370ec614768ac13582405f93635cf3637c Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Tue, 5 May 2009 21:52:06 +0900
Subject: [PATCH 1258/1421] nilfs2: ensure to clear dirty state when deleting
 metadata file block

This would fix the following failure during GC:

 nilfs_cpfile_delete_checkpoints: cannot delete block
 NILFS: GC failed during preparation: cannot delete checkpoints: err=-2

The problem was caused by a break in state consistency between page
cache and btree; the above block was removed from the btree but the
page buffering the block was remaining in the page cache in dirty
state.

This resolves the inconsistency by ensuring to clear dirty state of
the page buffering the deleted block.

Reported-by: David Arendt <admin@prnet.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/mdt.c  | 2 +-
 fs/nilfs2/page.c | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index e1c6777931b..bb78745a0e3 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -300,7 +300,7 @@ int nilfs_mdt_delete_block(struct inode *inode, unsigned long block)
 	int err;
 
 	err = nilfs_bmap_delete(ii->i_bmap, block);
-	if (likely(!err)) {
+	if (!err || err == -ENOENT) {
 		nilfs_mdt_mark_dirty(inode);
 		nilfs_mdt_forget_block(inode, block);
 	}
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 1bfbba9c0e9..a2692bbc7b5 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -128,7 +128,8 @@ void nilfs_forget_buffer(struct buffer_head *bh)
 
 	lock_buffer(bh);
 	clear_buffer_nilfs_volatile(bh);
-	if (test_clear_buffer_dirty(bh) && nilfs_page_buffers_clean(page))
+	clear_buffer_dirty(bh);
+	if (nilfs_page_buffers_clean(page))
 		__nilfs_clear_page_dirty(page);
 
 	clear_buffer_uptodate(bh);
-- 
GitLab


From 47eb6b9c8fa963c9f49967ad1d9d7ec947d15b68 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Thu, 30 Apr 2009 02:21:00 +0900
Subject: [PATCH 1259/1421] nilfs2: fix possible circular locking for get
 information ioctls

This is one of two patches which are to correct possible circular
locking between mm->mmap_sem and nilfs->ns_segctor_sem.

The problem was detected by lockdep check as follows:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00002-g3552613 #6
 -------------------------------------------------------
 mmap/5418 is trying to acquire lock:
 (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
 (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
 [<c01470a5>] __lock_acquire+0x1066/0x13b0
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<c01836bc>] might_fault+0x68/0x88
 [<c023c730>] copy_to_user+0x2c/0xfc
 [<d0d11b4f>] nilfs_ioctl_wrap_copy+0x103/0x160 [nilfs2]
 [<d0d11fa9>] nilfs_ioctl+0x30a/0x3b0 [nilfs2]
 [<c01a3be7>] vfs_ioctl+0x22/0x69
 [<c01a408e>] do_vfs_ioctl+0x460/0x499
 [<c01a4107>] sys_ioctl+0x40/0x5a
 [<c01031a4>] sysenter_do_call+0x12/0x38
 [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<c0433f1d>] down_read+0x2a/0x3e
 [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
 [<c0183b0b>] __do_fault+0x165/0x376
 [<c01855cd>] handle_mm_fault+0x287/0x5d1
 [<c043712d>] do_page_fault+0x2fb/0x30a
 [<c0435462>] error_code+0x72/0x78
 [<ffffffff>] 0xffffffff

 other info that might help us debug this:

 1 lock held by mmap/5418:
 #0:  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 stack backtrace:
 Pid: 5418, comm: mmap Not tainted 2.6.30-rc3-nilfs-00002-g3552613 #6
 Call Trace:
 [<c0432145>] ? printk+0xf/0x12
 [<c0145c48>] print_circular_bug_tail+0xaa/0xb5
 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
 [<d0d10149>] ? nilfs_sufile_get_stat+0x1e/0x105 [nilfs2]
 [<c013b59a>] ? up_read+0x16/0x2c
 [<d0d10225>] ? nilfs_sufile_get_stat+0xfa/0x105 [nilfs2]
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<c0433f1d>] down_read+0x2a/0x3e
 [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
 [<c0183b0b>] __do_fault+0x165/0x376
 [<c01855cd>] handle_mm_fault+0x287/0x5d1
 [<c043700a>] ? do_page_fault+0x1d8/0x30a
 [<c013b54f>] ? down_read_trylock+0x39/0x43
 [<c043712d>] do_page_fault+0x2fb/0x30a
 [<c0436e32>] ? do_page_fault+0x0/0x30a
 [<c0435462>] error_code+0x72/0x78
 [<c0436e32>] ? do_page_fault+0x0/0x30a

This makes the lock granularity of nilfs->ns_segctor_sem finer than
that of the mmap semaphore for ioctl commands except
nilfs_clean_segments().

The successive patch ("nilfs2: fix lock order reversal in
nilfs_clean_segments ioctl") is required to fully resolve the problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c | 100 ++++++++++++++++++----------------------------
 1 file changed, 38 insertions(+), 62 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index be387c6b2d4..e3c693d37d6 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -147,29 +147,12 @@ static ssize_t
 nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			  void *buf, size_t size, size_t nmembs)
 {
-	return nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
-				       nmembs);
-}
-
-static int nilfs_ioctl_get_cpinfo(struct inode *inode, struct file *filp,
-				  unsigned int cmd, void __user *argp)
-{
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
-	struct nilfs_argv argv;
 	int ret;
 
-	if (copy_from_user(&argv, argp, sizeof(argv)))
-		return -EFAULT;
-
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
-				    nilfs_ioctl_do_get_cpinfo);
+	ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
+				      nmembs);
 	up_read(&nilfs->ns_segctor_sem);
-	if (ret < 0)
-		return ret;
-
-	if (copy_to_user(argp, &argv, sizeof(argv)))
-		ret = -EFAULT;
 	return ret;
 }
 
@@ -195,28 +178,11 @@ static ssize_t
 nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			  void *buf, size_t size, size_t nmembs)
 {
-	return nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
-}
-
-static int nilfs_ioctl_get_suinfo(struct inode *inode, struct file *filp,
-				  unsigned int cmd, void __user *argp)
-{
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
-	struct nilfs_argv argv;
 	int ret;
 
-	if (copy_from_user(&argv, argp, sizeof(argv)))
-		return -EFAULT;
-
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
-				    nilfs_ioctl_do_get_suinfo);
+	ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
-	if (ret < 0)
-		return ret;
-
-	if (copy_to_user(argp, &argv, sizeof(argv)))
-		ret = -EFAULT;
 	return ret;
 }
 
@@ -242,28 +208,11 @@ static ssize_t
 nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			 void *buf, size_t size, size_t nmembs)
 {
-	return nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
-}
-
-static int nilfs_ioctl_get_vinfo(struct inode *inode, struct file *filp,
-				 unsigned int cmd, void __user *argp)
-{
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
-	struct nilfs_argv argv;
 	int ret;
 
-	if (copy_from_user(&argv, argp, sizeof(argv)))
-		return -EFAULT;
-
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
-				    nilfs_ioctl_do_get_vinfo);
+	ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
-	if (ret < 0)
-		return ret;
-
-	if (copy_to_user(argp, &argv, sizeof(argv)))
-		ret = -EFAULT;
 	return ret;
 }
 
@@ -276,17 +225,21 @@ nilfs_ioctl_do_get_bdescs(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	struct nilfs_bdesc *bdescs = buf;
 	int ret, i;
 
+	down_read(&nilfs->ns_segctor_sem);
 	for (i = 0; i < nmembs; i++) {
 		ret = nilfs_bmap_lookup_at_level(bmap,
 						 bdescs[i].bd_offset,
 						 bdescs[i].bd_level + 1,
 						 &bdescs[i].bd_blocknr);
 		if (ret < 0) {
-			if (ret != -ENOENT)
+			if (ret != -ENOENT) {
+				up_read(&nilfs->ns_segctor_sem);
 				return ret;
+			}
 			bdescs[i].bd_blocknr = 0;
 		}
 	}
+	up_read(&nilfs->ns_segctor_sem);
 	return nmembs;
 }
 
@@ -300,10 +253,8 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
-	down_read(&nilfs->ns_segctor_sem);
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
 				    nilfs_ioctl_do_get_bdescs);
-	up_read(&nilfs->ns_segctor_sem);
 	if (ret < 0)
 		return ret;
 
@@ -623,6 +574,29 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
 	return 0;
 }
 
+static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
+				unsigned int cmd, void __user *argp,
+				ssize_t (*dofunc)(struct the_nilfs *,
+						  __u64 *, int,
+						  void *, size_t, size_t))
+
+{
+	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+	struct nilfs_argv argv;
+	int ret;
+
+	if (copy_from_user(&argv, argp, sizeof(argv)))
+		return -EFAULT;
+
+	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
+	if (ret < 0)
+		return ret;
+
+	if (copy_to_user(argp, &argv, sizeof(argv)))
+		ret = -EFAULT;
+	return ret;
+}
+
 long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	struct inode *inode = filp->f_dentry->d_inode;
@@ -634,16 +608,18 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	case NILFS_IOCTL_DELETE_CHECKPOINT:
 		return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_CPINFO:
-		return nilfs_ioctl_get_cpinfo(inode, filp, cmd, argp);
+		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    nilfs_ioctl_do_get_cpinfo);
 	case NILFS_IOCTL_GET_CPSTAT:
 		return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_SUINFO:
-		return nilfs_ioctl_get_suinfo(inode, filp, cmd, argp);
+		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    nilfs_ioctl_do_get_suinfo);
 	case NILFS_IOCTL_GET_SUSTAT:
 		return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_VINFO:
-		/* XXX: rename to ??? */
-		return nilfs_ioctl_get_vinfo(inode, filp, cmd, argp);
+		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    nilfs_ioctl_do_get_vinfo);
 	case NILFS_IOCTL_GET_BDESCS:
 		return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
 	case NILFS_IOCTL_CLEAN_SEGMENTS:
-- 
GitLab


From 4f6b828837b4e3836f2c9ac2f0eab9773b6c1327 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Sun, 10 May 2009 22:41:43 +0900
Subject: [PATCH 1260/1421] nilfs2: fix lock order reversal in
 nilfs_clean_segments ioctl

This is a companion patch to ("nilfs2: fix possible circular locking
for get information ioctls").

This corrects lock order reversal between mm->mmap_sem and
nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by
lockdep check:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00003-g360bdc1 #7
 -------------------------------------------------------
 mmap/5294 is trying to acquire lock:
  (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
        [<c01470a5>] __lock_acquire+0x1066/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c01836bc>] might_fault+0x68/0x88
        [<c023c61d>] copy_from_user+0x2a/0x111
        [<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2]
        [<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2]
        [<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2]
        [<c01a3be7>] vfs_ioctl+0x22/0x69
        [<c01a408e>] do_vfs_ioctl+0x460/0x499
        [<c01a4107>] sys_ioctl+0x40/0x5a
        [<c01031a4>] sysenter_do_call+0x12/0x38
        [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
        [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c0433f1d>] down_read+0x2a/0x3e
        [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
        [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
        [<c0183b0b>] __do_fault+0x165/0x376
        [<c01855cd>] handle_mm_fault+0x287/0x5d1
        [<c043712d>] do_page_fault+0x2fb/0x30a
        [<c0435462>] error_code+0x72/0x78
        [<ffffffff>] 0xffffffff

where nilfs_clean_segments() holds:

  nilfs->ns_segctor_sem -> copy_from_user()
                             --> page fault -> mm->mmap_sem

And, page fault path may hold:

  page fault -> mm->mmap_sem
         --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem

Even though nilfs_clean_segments() does not perform write access on
given user pages, it may cause deadlock because nilfs->ns_segctor_sem
is shared per device and mm->mmap_sem can be shared with other tasks.

To avoid this problem, this patch moves all calls of copy_from_user()
outside the nilfs->ns_segctor_sem lock in the ioctl.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c   | 163 +++++++++++++++++++++++++-------------------
 fs/nilfs2/nilfs.h   |   3 +-
 fs/nilfs2/segment.c |   5 +-
 fs/nilfs2/segment.h |   3 +-
 4 files changed, 100 insertions(+), 74 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index e3c693d37d6..49489f68eab 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -25,6 +25,7 @@
 #include <linux/smp_lock.h>	/* lock_kernel(), unlock_kernel() */
 #include <linux/capability.h>	/* capable() */
 #include <linux/uaccess.h>	/* copy_from_user(), copy_to_user() */
+#include <linux/vmalloc.h>
 #include <linux/nilfs2_fs.h>
 #include "nilfs.h"
 #include "segment.h"
@@ -297,10 +298,10 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode,
 	return 0;
 }
 
-static ssize_t
-nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
-			   void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
+				   struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct inode *inode;
 	struct nilfs_vdesc *vdesc;
 	struct buffer_head *bh, *n;
@@ -361,19 +362,10 @@ nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	return ret;
 }
 
-static inline int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
-					  struct nilfs_argv *argv,
-					  int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_move_blocks);
-}
-
-static ssize_t
-nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
-				  int flags, void *buf, size_t size,
-				  size_t nmembs)
+static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
+					  struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct inode *cpfile = nilfs->ns_cpfile;
 	struct nilfs_period *periods = buf;
 	int ret, i;
@@ -387,36 +379,21 @@ nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
 	return nmembs;
 }
 
-static inline int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
-						 struct nilfs_argv *argv,
-						 int dir)
+static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
+				      struct nilfs_argv *argv, void *buf)
 {
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_delete_checkpoints);
-}
+	size_t nmembs = argv->v_nmembs;
+	int ret;
 
-static ssize_t
-nilfs_ioctl_do_free_vblocknrs(struct the_nilfs *nilfs, __u64 *posp, int flags,
-			      void *buf, size_t size, size_t nmembs)
-{
-	int ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
+	ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
 
 	return (ret < 0) ? ret : nmembs;
 }
 
-static inline int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
-					     struct nilfs_argv *argv,
-					     int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_free_vblocknrs);
-}
-
-static ssize_t
-nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
-				 int flags, void *buf, size_t size,
-				 size_t nmembs)
+static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
+					 struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct inode *dat = nilfs_dat_inode(nilfs);
 	struct nilfs_bmap *bmap = NILFS_I(dat)->i_bmap;
 	struct nilfs_bdesc *bdescs = buf;
@@ -455,18 +432,10 @@ nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
 	return nmembs;
 }
 
-static inline int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
-						struct nilfs_argv *argv,
-						int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_mark_blocks_dirty);
-}
-
-static ssize_t
-nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
-			     void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
+				     struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct nilfs_sb_info *sbi = nilfs->ns_writer;
 	int ret;
 
@@ -481,31 +450,19 @@ nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	return (ret < 0) ? ret : nmembs;
 }
 
-static inline int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
-					     struct nilfs_argv *argv,
-					     int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_free_segments);
-}
-
 int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
-				       void __user *argp)
+				       struct nilfs_argv *argv, void **kbufs)
 {
-	struct nilfs_argv argv[5];
 	const char *msg;
-	int dir, ret;
-
-	if (copy_from_user(argv, argp, sizeof(argv)))
-		return -EFAULT;
+	int ret;
 
-	dir = _IOC_WRITE;
-	ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], dir);
+	ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
 	if (ret < 0) {
 		msg = "cannot read source blocks";
 		goto failed;
 	}
-	ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], dir);
+
+	ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because checkpoints can be removed
@@ -514,7 +471,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot delete checkpoints";
 		goto failed;
 	}
-	ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], dir);
+	ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], kbufs[2]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because DAT file is updated atomically
@@ -523,7 +480,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot delete virtual blocks from DAT file";
 		goto failed;
 	}
-	ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], dir);
+	ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], kbufs[3]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because the operation is nondestructive.
@@ -531,7 +488,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot mark copying blocks dirty";
 		goto failed;
 	}
-	ret = nilfs_ioctl_free_segments(nilfs, &argv[4], dir);
+	ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because this operation is atomic.
@@ -551,9 +508,75 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
 				      unsigned int cmd, void __user *argp)
 {
+	struct nilfs_argv argv[5];
+	const static size_t argsz[5] = {
+		sizeof(struct nilfs_vdesc),
+		sizeof(struct nilfs_period),
+		sizeof(__u64),
+		sizeof(struct nilfs_bdesc),
+		sizeof(__u64),
+	};
+	void __user *base;
+	void *kbufs[5];
+	struct the_nilfs *nilfs;
+	size_t len, nsegs;
+	int n, ret;
+
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
-	return nilfs_clean_segments(inode->i_sb, argp);
+
+	if (copy_from_user(argv, argp, sizeof(argv)))
+		return -EFAULT;
+
+	nsegs = argv[4].v_nmembs;
+	if (argv[4].v_size != argsz[4])
+		return -EINVAL;
+	/*
+	 * argv[4] points to segment numbers this ioctl cleans.  We
+	 * use kmalloc() for its buffer because memory used for the
+	 * segment numbers is enough small.
+	 */
+	kbufs[4] = memdup_user((void __user *)(unsigned long)argv[4].v_base,
+			       nsegs * sizeof(__u64));
+	if (IS_ERR(kbufs[4]))
+		return PTR_ERR(kbufs[4]);
+
+	nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+
+	for (n = 0; n < 4; n++) {
+		ret = -EINVAL;
+		if (argv[n].v_size != argsz[n])
+			goto out_free;
+
+		if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
+			goto out_free;
+
+		len = argv[n].v_size * argv[n].v_nmembs;
+		base = (void __user *)(unsigned long)argv[n].v_base;
+		if (len == 0) {
+			kbufs[n] = NULL;
+			continue;
+		}
+
+		kbufs[n] = vmalloc(len);
+		if (!kbufs[n]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+		if (copy_from_user(kbufs[n], base, len)) {
+			ret = -EFAULT;
+			vfree(kbufs[n]);
+			goto out_free;
+		}
+	}
+
+	ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+
+ out_free:
+	while (--n > 0)
+		vfree(kbufs[n]);
+	kfree(kbufs[4]);
+	return ret;
 }
 
 static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 3d0c18a16db..da6fc0bba2e 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -236,7 +236,8 @@ extern int nilfs_sync_file(struct file *, struct dentry *, int);
 
 /* ioctl.c */
 long nilfs_ioctl(struct file *, unsigned int, unsigned long);
-int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, void __user *);
+int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, struct nilfs_argv *,
+				       void **);
 
 /* inode.c */
 extern struct inode *nilfs_new_inode(struct inode *, int);
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index fb70ec3be20..22c7f65c240 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2589,7 +2589,8 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head)
 	}
 }
 
-int nilfs_clean_segments(struct super_block *sb, void __user *argp)
+int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
+			 void **kbufs)
 {
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 	struct nilfs_sc_info *sci = NILFS_SC(sbi);
@@ -2606,7 +2607,7 @@ int nilfs_clean_segments(struct super_block *sb, void __user *argp)
 	err = nilfs_init_gcdat_inode(nilfs);
 	if (unlikely(err))
 		goto out_unlock;
-	err = nilfs_ioctl_prepare_clean_segments(nilfs, argp);
+	err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
 	if (unlikely(err))
 		goto out_unlock;
 
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index a98fc1ed0bb..476bdd5df5b 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -222,7 +222,8 @@ extern int nilfs_construct_segment(struct super_block *);
 extern int nilfs_construct_dsync_segment(struct super_block *, struct inode *,
 					 loff_t, loff_t);
 extern void nilfs_flush_segment(struct super_block *, ino_t);
-extern int nilfs_clean_segments(struct super_block *, void __user *);
+extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
+				void **);
 
 extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
 						  __u64 *, size_t);
-- 
GitLab


From 19bca6ab75d8118ae970fcc656359ddb467ac763 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Tue, 28 Apr 2009 12:45:30 +0200
Subject: [PATCH 1261/1421] KVM: SVM: Fix cross vendor migration issue with
 unusable bit

AMDs VMCB does not have an explicit unusable segment descriptor field,
so we emulate it by using "not present". This has to be setup before
the fixups, because this field is used there.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1821c207819..9184e32778a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -796,6 +796,11 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 	var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
 	var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
 
+	/* AMD's VMCB does not have an explicit unusable field, so emulate it
+	 * for cross vendor migration purposes by "not present"
+	 */
+	var->unusable = !var->present || (var->type == 0);
+
 	switch (seg) {
 	case VCPU_SREG_CS:
 		/*
@@ -827,8 +832,6 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 			var->type |= 0x1;
 		break;
 	}
-
-	var->unusable = !var->present;
 }
 
 static int svm_get_cpl(struct kvm_vcpu *vcpu)
-- 
GitLab


From 334b8ad7b182fc14d720acd7729afda3ab4c7e3a Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 3 May 2009 16:34:21 +0300
Subject: [PATCH 1262/1421] KVM: Fix NX support reporting

NX support is bit 20, not bit 1.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7c1ce5ac613..834a7bf25e4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1259,7 +1259,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
 		bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) |
 		bit(X86_FEATURE_SYSCALL) |
-		(bit(X86_FEATURE_NX) && is_efer_nx()) |
+		(is_efer_nx() ? bit(X86_FEATURE_NX) : 0) |
 #ifdef CONFIG_X86_64
 		bit(X86_FEATURE_LM) |
 #endif
-- 
GitLab


From e286e86e6d2042d67d09244aa0e05ffef75c9d54 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 3 May 2009 18:50:55 +0300
Subject: [PATCH 1263/1421] KVM: Make EFER reads safe when EFER does not exist

Some processors don't have EFER; don't oops if userspace wants us to
read EFER when we check NX.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 834a7bf25e4..49079a46687 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1121,9 +1121,9 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 
 static int is_efer_nx(void)
 {
-	u64 efer;
+	unsigned long long efer = 0;
 
-	rdmsrl(MSR_EFER, efer);
+	rdmsrl_safe(MSR_EFER, &efer);
 	return efer & EFER_NX;
 }
 
-- 
GitLab


From 99f85a28a78e96d28907fe036e1671a218fee597 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 11 May 2009 14:21:10 +0300
Subject: [PATCH 1264/1421] KVM: SVM: Remove port 80 passthrough
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

KVM optimizes guest port 80 accesses by passthing them through to the host.
Some AMD machines die on port 80 writes, allowing the guest to hard-lock the
host.

Remove the port passthrough to avoid the problem.

Cc: stable@kernel.org
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Tested-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 9184e32778a..1f8510c51d6 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -411,7 +411,6 @@ static __init int svm_hardware_setup(void)
 
 	iopm_va = page_address(iopm_pages);
 	memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
-	clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */
 	iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
 
 	if (boot_cpu_has(X86_FEATURE_NX))
-- 
GitLab


From fd18de50b9e7965f93d231e7390436fb8900c0e6 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sun, 10 May 2009 23:57:41 +0100
Subject: [PATCH 1265/1421] intel-iommu: PAE memory corruption fix

PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE.

So it's not sufficient to ensure that you use phys_addr_t or uint64_t
everywhere you handle physical addresses -- you also have to avoid using
the construct 'addr & PAGE_MASK', because that will strip the high 32
bits of the address.

This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of
PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances
that don't matter -- where it's being used on the virtual bus addresses
we're dishing out, which are 32-bit anyway.

Since PHYSICAL_PAGE_MASK is not present on other architectures, we have
to define it (to PAGE_MASK) if it's not already defined.

Maybe it would be better just to fix PAGE_MASK for i386/PAE?

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pci/intel-iommu.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 001b328adf8..a563fbe559d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -59,6 +59,10 @@
 #define DMA_32BIT_PFN		IOVA_PFN(DMA_BIT_MASK(32))
 #define DMA_64BIT_PFN		IOVA_PFN(DMA_BIT_MASK(64))
 
+#ifndef PHYSICAL_PAGE_MASK
+#define PHYSICAL_PAGE_MASK PAGE_MASK
+#endif
+
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
 
@@ -1216,7 +1220,7 @@ static void dmar_init_reserved_ranges(void)
 			if (!r->flags || !(r->flags & IORESOURCE_MEM))
 				continue;
 			addr = r->start;
-			addr &= PAGE_MASK;
+			addr &= PHYSICAL_PAGE_MASK;
 			size = r->end - addr;
 			size = PAGE_ALIGN(size);
 			iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
@@ -2173,7 +2177,8 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
 	 * is not a big problem
 	 */
 	ret = domain_page_mapping(domain, start_paddr,
-		((u64)paddr) & PAGE_MASK, size, prot);
+				  ((u64)paddr) & PHYSICAL_PAGE_MASK,
+				  size, prot);
 	if (ret)
 		goto error;
 
@@ -2463,8 +2468,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
 		addr = page_to_phys(sg_page(sg)) + sg->offset;
 		size = aligned_size((u64)addr, sg->length);
 		ret = domain_page_mapping(domain, start_addr + offset,
-			((u64)addr) & PAGE_MASK,
-			size, prot);
+					  ((u64)addr) & PHYSICAL_PAGE_MASK,
+					  size, prot);
 		if (ret) {
 			/*  clear the page */
 			dma_pte_clear_range(domain, start_addr,
-- 
GitLab


From f5208997087e6eb2096532b5a313eeb236535bdc Mon Sep 17 00:00:00 2001
From: Zoltan Karcagi <zkr@freemail.hu>
Date: Wed, 6 May 2009 16:30:21 +0200
Subject: [PATCH 1266/1421] HID: fix dropped device-specific quirks

Device-specific quirks are set up correctly in their respective vendor-specific
driver, then get overwritten in usbhid_parse().

This is only issue for device-specific NOGET quirks being set by driver for a
few devices out there.

Signed-off-by: Zoltan Karcagi <zkr@freemail.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 900ce18dd54..ac8049b5f1e 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -898,7 +898,7 @@ static int usbhid_parse(struct hid_device *hid)
 		goto err;
 	}
 
-	hid->quirks = quirks;
+	hid->quirks |= quirks;
 
 	return 0;
 err:
-- 
GitLab


From b820aabf6cb987fd03d85b0b5f599685051e0426 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 6 May 2009 15:48:49 -0400
Subject: [PATCH 1267/1421] HID: add NOGET quirk for devices from CH Products

This patch (as1240) adds the NOGET quirk for three devices from CH
Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim
yoke.  Without these quirks, the devices haven't worked for many
kernel releases.  Sometimes replugging them after boot-up would get
them to work and sometimes they wouldn't work at all.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Sean Hildebrand <silverwraithii@gmail.com>
Reported-by: Sid Boyce <sboyce@blueyonder.co.uk>
Tested-by: Sean Hildebrand <silverwraithii@gmail.com>
Tested-by: Sid Boyce <sboyce@blueyonder.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-ids.h           | 5 +++++
 drivers/hid/usbhid/hid-quirks.c | 3 +++
 2 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index aa1b995dd03..4d5ee2bbc62 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -113,6 +113,11 @@
 #define USB_VENDOR_ID_BERKSHIRE		0x0c98
 #define USB_DEVICE_ID_BERKSHIRE_PCWD	0x1140
 
+#define USB_VENDOR_ID_CH		0x068e
+#define USB_DEVICE_ID_CH_PRO_PEDALS	0x00f2
+#define USB_DEVICE_ID_CH_COMBATSTICK	0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE	0x00ff
+
 #define USB_VENDOR_ID_CHERRY		0x046a
 #define USB_DEVICE_ID_CHERRY_CYMOTION	0x0023
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 4391717d251..d8f7423f363 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -50,6 +50,9 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
-- 
GitLab


From 83aca8f480fcd2d9748301a5d060cf947dc75b94 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Mon, 11 May 2009 23:24:47 +0900
Subject: [PATCH 1268/1421] nilfs2: check size of array structured data
 exchanged via ioctls

Although some ioctls of nilfs2 exchange data in the form of indirectly
referenced array, some of them lack size check on the array elements.

This inserts the missing checks and rejects requests if data of ioctl
does not have a valid format.

We usually don't have to check size of structures that we associated
with ioctl commands because the size is tested implicitly for
identifying ioctl command; the checks this patch adds are for the
cases where the implicit check is not applied.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 49489f68eab..50ff3f2cdf2 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -254,6 +254,9 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
+	if (argv.v_size != sizeof(struct nilfs_bdesc))
+		return -EINVAL;
+
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
 				    nilfs_ioctl_do_get_bdescs);
 	if (ret < 0)
@@ -599,6 +602,7 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
 
 static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
 				unsigned int cmd, void __user *argp,
+				size_t membsz,
 				ssize_t (*dofunc)(struct the_nilfs *,
 						  __u64 *, int,
 						  void *, size_t, size_t))
@@ -611,6 +615,9 @@ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
+	if (argv.v_size != membsz)
+		return -EINVAL;
+
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
 	if (ret < 0)
 		return ret;
@@ -632,16 +639,19 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_CPINFO:
 		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    sizeof(struct nilfs_cpinfo),
 					    nilfs_ioctl_do_get_cpinfo);
 	case NILFS_IOCTL_GET_CPSTAT:
 		return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_SUINFO:
 		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    sizeof(struct nilfs_suinfo),
 					    nilfs_ioctl_do_get_suinfo);
 	case NILFS_IOCTL_GET_SUSTAT:
 		return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_VINFO:
 		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    sizeof(struct nilfs_vinfo),
 					    nilfs_ioctl_do_get_vinfo);
 	case NILFS_IOCTL_GET_BDESCS:
 		return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
-- 
GitLab


From 914dc18255e430ceabb10b57394e01814c69c5cd Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 11 May 2009 13:04:55 +0300
Subject: [PATCH 1269/1421] ASoC: soc-core: fix crash when removing not
 instantiated card

If the card was not instantiated in snd_soc_instantiate_card, calling
soc-remove will crash because some of codec, cpu_dai and card .remove
methods are called twice.
Fix this by returning from soc_remove immediately.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/soc-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 99712f652d0..1cd149b9ce6 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -954,6 +954,9 @@ static int soc_remove(struct platform_device *pdev)
 	struct snd_soc_platform *platform = card->platform;
 	struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
 
+	if (!card->instantiated)
+		return 0;
+
 	run_delayed_work(&card->delayed_work);
 
 	if (platform->remove)
-- 
GitLab


From 1ffafeb556d50de8039e14f1cbbe58e9e4549915 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 11 May 2009 13:11:38 +0300
Subject: [PATCH 1270/1421] pxa2xx-ac97: fix reset gpio mode setting

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/arm/pxa2xx-ac97-lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index a2c12d105c9..6fdca97186e 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -65,7 +65,7 @@ static void set_resetgpio_mode(int resetgpio_action)
 		switch (resetgpio_action) {
 		case RESETGPIO_NORMAL_ALTFUNC:
 			if (reset_gpio == 113)
-				mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+				mode = 113 | GPIO_ALT_FN_2_OUT;
 			if (reset_gpio == 95)
 				mode = 95 | GPIO_ALT_FN_1_OUT;
 			break;
-- 
GitLab


From 842faa6c1a1d6faddf3377948e5cf214812c6c90 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 10 May 2009 01:06:54 +0900
Subject: [PATCH 1271/1421] libata: fix attach error handling

New device attach path in ata_eh_revalidate_and_attach() is divided
into two separate loops because ATA requires IDENTIFY to be issued to
slave first while the user expects to see device probe messages from
the master device.  new_mask is used to track which devices are the
new ones between the first loop and the second.

This usually works well but if an error occurs during configuration
stage, ata_dev_revalidate_and_attach() returns with error code and
forgets new_mask.  On the retry run, dev->class is set and new_mask
for the device is clear, so the device just gets revalidated and thus
ends up skipping post-configuration procedure including scheduling of
SCSI_HOTPLUG for the device.  When this occurs, ATA part of probing
works fine but SCSI probing usually doesn't happen and makes the
device unreachable.

The behavior has been around for a very long time but it has been
uncovered with the recent addition of 1_5_GBPS horkage which uses
-EAGAIN return value from ata_dev_configure() to restart the probing
sequence after forcing cable speed.

This can be fixed by making sure dev->class is permanently set only
after all configurations are successfully complete.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tim Connors <tconnors+linuxkml@astro.swin.edu.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 01831312c36..eb8b94016c0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		} else if (dev->class == ATA_DEV_UNKNOWN &&
 			   ehc->tries[dev->devno] &&
 			   ata_class_enabled(ehc->classes[dev->devno])) {
+			/* Temporarily set dev->class, it will be
+			 * permanently set once all configurations are
+			 * complete.  This is necessary because new
+			 * device configuration is done in two
+			 * separate loops.
+			 */
 			dev->class = ehc->classes[dev->devno];
 
 			if (dev->class == ATA_DEV_PMP)
@@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			else
 				rc = ata_dev_read_id(dev, &dev->class,
 						     readid_flags, dev->id);
+
+			/* read_id might have changed class, store and reset */
+			ehc->classes[dev->devno] = dev->class;
+			dev->class = ATA_DEV_UNKNOWN;
+
 			switch (rc) {
 			case 0:
 				/* clear error info accumulated during probe */
@@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			case -ENOENT:
 				/* IDENTIFY was issued to non-existent
 				 * device.  No need to reset.  Just
-				 * thaw and kill the device.
+				 * thaw and ignore the device.
 				 */
 				ata_eh_thaw_port(ap);
-				dev->class = ATA_DEV_UNKNOWN;
 				break;
 			default:
-				dev->class = ATA_DEV_UNKNOWN;
 				goto err;
 			}
 		}
@@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		    dev->class == ATA_DEV_PMP)
 			continue;
 
+		dev->class = ehc->classes[dev->devno];
+
 		ehc->i.flags |= ATA_EHI_PRINTINFO;
 		rc = ata_dev_configure(dev);
 		ehc->i.flags &= ~ATA_EHI_PRINTINFO;
-		if (rc)
+		if (rc) {
+			dev->class = ATA_DEV_UNKNOWN;
 			goto err;
+		}
 
 		spin_lock_irqsave(ap->lock, flags);
 		ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
-- 
GitLab


From 29b7e43c310bdc20d240c7674d9073f6c1c12a3f Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Mon, 4 May 2009 20:58:50 +0200
Subject: [PATCH 1272/1421] sata_mv: use new sata phy register settings for new
 devices

Marvell's new SoC (65 nano) needs different settings for its SATA
PHY registers.

Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 69 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 67 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 870dcfd8235..23714aefb82 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -293,6 +293,10 @@ enum {
 	FISCFG_WAIT_DEV_ERR	= (1 << 8),	/* wait for host on DevErr */
 	FISCFG_SINGLE_SYNC	= (1 << 16),	/* SYNC on DMA activation */
 
+	PHY_MODE9_GEN2		= 0x398,
+	PHY_MODE9_GEN1		= 0x39c,
+	PHYCFG_OFS		= 0x3a0,	/* only in 65n devices */
+
 	MV5_PHY_MODE		= 0x74,
 	MV5_LTMODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
@@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
 static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
 				      void __iomem *mmio);
 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+				  void __iomem *mmio, unsigned int port);
 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no);
@@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = {
 	.reset_bus		= mv_soc_reset_bus,
 };
 
+static const struct mv_hw_ops mv_soc_65n_ops = {
+	.phy_errata		= mv_soc_65n_phy_errata,
+	.enable_leds		= mv_soc_enable_leds,
+	.reset_hc		= mv_soc_reset_hc,
+	.reset_flash		= mv_soc_reset_flash,
+	.reset_bus		= mv_soc_reset_bus,
+};
+
 /*
  * Functions
  */
@@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
 	return;
 }
 
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+				  void __iomem *mmio, unsigned int port)
+{
+	void __iomem *port_mmio = mv_port_base(mmio, port);
+	u32	reg;
+
+	reg = readl(port_mmio + PHY_MODE3);
+	reg &= ~(0x3 << 27);	/* SELMUPF (bits 28:27) to 1 */
+	reg |= (0x1 << 27);
+	reg &= ~(0x3 << 29);	/* SELMUPI (bits 30:29) to 1 */
+	reg |= (0x1 << 29);
+	writel(reg, port_mmio + PHY_MODE3);
+
+	reg = readl(port_mmio + PHY_MODE4);
+	reg &= ~0x1;	/* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+	reg |= (0x1 << 16);
+	writel(reg, port_mmio + PHY_MODE4);
+
+	reg = readl(port_mmio + PHY_MODE9_GEN2);
+	reg &= ~0xf;	/* TXAMP[3:0] (bits 3:0) to 8 */
+	reg |= 0x8;
+	reg &= ~(0x1 << 14);	/* TXAMP[4] (bit 14) to 0 */
+	writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+	reg = readl(port_mmio + PHY_MODE9_GEN1);
+	reg &= ~0xf;	/* TXAMP[3:0] (bits 3:0) to 8 */
+	reg |= 0x8;
+	reg &= ~(0x1 << 14);	/* TXAMP[4] (bit 14) to 0 */
+	writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ *	soc_is_65 - check if the soc is 65 nano device
+ *
+ *	Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ *	register, this register should contain non-zero value and it exists only
+ *	in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+	void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+	if (readl(port0_mmio + PHYCFG_OFS))
+		return true;
+	return false;
+}
+
 static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
 {
 	u32 ifcfg = readl(port_mmio + SATA_IFCFG);
@@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		}
 		break;
 	case chip_soc:
-		hpriv->ops = &mv_soc_ops;
+		if (soc_is_65n(hpriv))
+			hpriv->ops = &mv_soc_65n_ops;
+		else
+			hpriv->ops = &mv_soc_ops;
 		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
 			MV_HP_ERRATA_60X1C0;
 		break;
@@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 	n_hc = mv_get_hc_count(host->ports[0]->flags);
 
 	for (port = 0; port < host->n_ports; port++)
-		hpriv->ops->read_preamp(hpriv, port, mmio);
+		if (hpriv->ops->read_preamp)
+			hpriv->ops->read_preamp(hpriv, port, mmio);
 
 	rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
 	if (rc)
-- 
GitLab


From 6ad58b245a543461bd55d51b8303f555419687b2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 20 Apr 2009 22:31:25 +0200
Subject: [PATCH 1273/1421] pata_pdc202xx_old: fix UDMA33 handling

The original driver doesn't use 66 MHz clock for UDMA33.

[ The alternative solution would be to adjust UDMA33 timings
  for 66 MHz clock but I think that it is safer to stick with
  old & tested behavior for now. ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_pdc202xx_old.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 5fedb3d4032..2f3c9bed63d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -2,7 +2,7 @@
  * pata_pdc202xx_old.c 	- Promise PDC202xx PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
  *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
- *			  (C) 2007 Bartlomiej Zolnierkiewicz
+ *			  (C) 2007,2009 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
  *
@@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
 	u32 len;
 
 	/* Check we keep host level locking here */
-	if (adev->dma_mode >= XFER_UDMA_2)
+	if (adev->dma_mode > XFER_UDMA_2)
 		iowrite8(ioread8(clock) | sel66, clock);
 	else
 		iowrite8(ioread8(clock) & ~sel66, clock);
@@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
 		iowrite8(ioread8(clock) & ~sel66, clock);
 	}
 	/* Flip back to 33Mhz for PIO */
-	if (adev->dma_mode >= XFER_UDMA_2)
+	if (adev->dma_mode > XFER_UDMA_2)
 		iowrite8(ioread8(clock) & ~sel66, clock);
 	ata_bmdma_stop(qc);
 	pdc202xx_set_piomode(ap, adev);
-- 
GitLab


From 6f9c1ea2c1cea2de3e5670a7cd98d9f7316b0952 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 23 Apr 2009 09:55:28 +0900
Subject: [PATCH 1274/1421] libata: clear ering on resume

Error timestamps are in jiffies which doesn't run while suspended and
PHY events during resume isn't too uncommon.  When the two are
combined, it can lead to unnecessary speed downs if the machine is
suspended and resumed repeatedly.  Clear error history on resume.

This was reported and verified in bnc#486803 by Vladimir Botka.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vladimir Botka <vbotka@novell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index eb8b94016c0..94919ad03df 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3507,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
  */
 static void ata_eh_handle_port_resume(struct ata_port *ap)
 {
+	struct ata_link *link;
+	struct ata_device *dev;
 	unsigned long flags;
 	int rc = 0;
 
@@ -3521,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 
 	WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
 
+	/*
+	 * Error timestamps are in jiffies which doesn't run while
+	 * suspended and PHY events during resume isn't too uncommon.
+	 * When the two are combined, it can lead to unnecessary speed
+	 * downs if the machine is suspended and resumed repeatedly.
+	 * Clear error history.
+	 */
+	ata_for_each_link(link, ap, HOST_FIRST)
+		ata_for_each_dev(dev, link, ALL)
+			ata_ering_clear(&dev->ering);
+
 	ata_acpi_set_state(ap, PMSG_ON);
 
 	if (ap->ops->port_resume)
-- 
GitLab


From f0d0613dedda4891ecb1977e4d02bf9be93882a3 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sun, 26 Apr 2009 16:33:34 +0200
Subject: [PATCH 1275/1421] libata: fix suspend/resume for ATA SEMB devices

79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices
reporting 3c/c3 signature which belongs to SEMB devices now. However,
suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails
with the following:

hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
sd 1:0:0:0: [sda] Starting disk
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: class mismatch 1 != 7
ata2.00: revalidation failed (errno=-19)
ata2: limiting SATA link speed to 1.5 Gbps
ata4.00: configured for UDMA/133
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: class mismatch 1 != 7
ata2.00: revalidation failed (errno=-19)
ata2.00: disabled
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: [sda] START_STOP FAILED
sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
PM: Device 1:0:0:0 failed to thaw: error 65536
sd 3:0:0:0: [sdb] Starting disk

due to a class mismatch in ata_dev_revalidate(). Fix it by adding the
ATA_DEV_SEMB device class to the check.

CC: Tejun Heo <htejun@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 17c5d48a75d..c9242301cfa 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 
 	/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
 	if (ata_class_enabled(new_class) &&
-	    new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+	    new_class != ATA_DEV_ATA &&
+	    new_class != ATA_DEV_ATAPI &&
+	    new_class != ATA_DEV_SEMB) {
 		ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
 			       dev->class, new_class);
 		rc = -ENODEV;
-- 
GitLab


From ea7a5ed58fa40c76ff87c0dd960f1d785009dd6d Mon Sep 17 00:00:00 2001
From: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Date: Mon, 4 May 2009 15:48:45 +0200
Subject: [PATCH 1276/1421] Avoid world-writable sysfs files in libata driver.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2733b0c90b7..68d9132d8f6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
 		return ap->ops->em_show(ap, buf);
 	return -EINVAL;
 }
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
 		ata_scsi_em_message_show, ata_scsi_em_message_store);
 EXPORT_SYMBOL_GPL(dev_attr_em_message);
 
@@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
 	}
 	return -EINVAL;
 }
-DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
 			ata_scsi_activity_store);
 EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
 
-- 
GitLab


From c611bed780a51222ece8eaf303c779ef82d9d253 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 6 May 2009 17:08:44 +0100
Subject: [PATCH 1277/1421] ata_piix: ICH7 does not support correct MWDMA
 timings

See Errata documentation. The recommended workaround is to use PIO4 instead
which will we automatically do by flagging this mode not available.

Signed-off-by: Alan Cox <alan.cox@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 942d14ac879..2b5700a832a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -72,6 +72,7 @@
  *	ICH2    spec c #20	- IDE PRD must not cross a 64K boundary
  *				  and must be dword aligned
  *	ICH2    spec c #24	- UDMA mode 4,5 t85/86 should be 6ns not 3.3
+ *	ICH7	errata #16	- MWDMA1 timings are incorrect
  *
  * Should have been BIOS fixed:
  *	450NX:	errata #19	- DMA hangs on old 450NX
@@ -94,7 +95,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.12"
+#define DRV_VERSION	"2.13"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -136,6 +137,7 @@ enum piix_controller_ids {
 	ich_pata_33,		/* ICH up to UDMA 33 only */
 	ich_pata_66,		/* ICH up to 66 Mhz */
 	ich_pata_100,		/* ICH up to UDMA 100 */
+	ich_pata_100_nomwdma1,	/* ICH up to UDMA 100 but with no MWDMA1*/
 	ich5_sata,
 	ich6_sata,
 	ich6m_sata,
@@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* ICH6 (and 6) (i915) UDMA 100 */
 	{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* ICH7/7-R (i945, i975) UDMA 100*/
-	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
-	{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
+	{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
 	/* ICH8 Mobile PATA Controller */
 	{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 
@@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &ich_pata_ops,
 	},
 
+	[ich_pata_100_nomwdma1] =
+	{
+		.flags		= PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2_ONLY,
+		.udma_mask	= ATA_UDMA5,
+		.port_ops	= &ich_pata_ops,
+	},
+
 	[ich5_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-- 
GitLab


From 124a6eece386226191ec79e279a5471bd2614f81 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 6 May 2009 17:09:41 +0100
Subject: [PATCH 1278/1421] ata_piix: The Sony TZ90 needs the cable type
 hardcoding

The Sony TZ90 needs the cable type hardcoding. See bug #12734

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 2b5700a832a..d51a17c0f59 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -605,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
+	{ 0x27df, 0x104d, 0x900e },	/* ICH7 on Sony TZ-90 */
 	/* end marker */
 	{ 0, }
 };
-- 
GitLab


From 2b79bc4f7ebbd5af3c8b867968f9f15602d5f802 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Mon, 11 May 2009 14:25:34 -0400
Subject: [PATCH 1279/1421] dup2: Fix return value with oldfd == newfd and
 invalid fd

The return value of dup2 when oldfd == newfd and the fd isn't valid is
not getting properly sign extended.  We end up with 4294967287 instead
of -EBADF.

I've reproduced this on SLE11 (2.6.27.21), openSUSE Factory
(2.6.29-rc5), and Ubuntu 9.04 (2.6.28).

This patch uses a signed int for the error value so it is properly
extended.

Commit 6c5d0512a091480c9f981162227fdb1c9d70e555 introduced this
regression.

Reported-by: Jiri Dluhos <jdluhos@novell.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fcntl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index cc8e4de2fee..1ad703150de 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -117,11 +117,13 @@ SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd)
 {
 	if (unlikely(newfd == oldfd)) { /* corner case */
 		struct files_struct *files = current->files;
+		int retval = oldfd;
+
 		rcu_read_lock();
 		if (!fcheck_files(files, oldfd))
-			oldfd = -EBADF;
+			retval = -EBADF;
 		rcu_read_unlock();
-		return oldfd;
+		return retval;
 	}
 	return sys_dup3(oldfd, newfd, 0);
 }
-- 
GitLab


From 8daed1e549b55827758b3af7b8132a73fc51526f Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Mon, 11 May 2009 16:10:19 -0400
Subject: [PATCH 1280/1421] nfsd: silence lockdep warning

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 fs/nfsd/nfs4recover.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 5275097a756..b5348405046 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -229,7 +229,7 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f)
 		goto out;
 	status = vfs_readdir(filp, nfsd4_build_namelist, &names);
 	fput(filp);
-	mutex_lock(&dir->d_inode->i_mutex);
+	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
 	while (!list_empty(&names)) {
 		entry = list_entry(names.next, struct name_list, list);
 
@@ -264,7 +264,7 @@ nfsd4_unlink_clid_dir(char *name, int namlen)
 
 	dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name);
 
-	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+	mutex_lock_nested(&rec_dir.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
 	dentry = lookup_one_len(name, rec_dir.dentry, namlen);
 	if (IS_ERR(dentry)) {
 		status = PTR_ERR(dentry);
-- 
GitLab


From 9166d0f620d5dd4a128711bdeedb3e0f534d9d49 Mon Sep 17 00:00:00 2001
From: Adrian Batzill <agib@gmx.de>
Date: Mon, 11 May 2009 15:22:16 -0700
Subject: [PATCH 1281/1421] Input: atkbd - add force release keys quirk for
 Amilo Xi 3650

Signed-off-by: Adrian Batzill <agib@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 444dec07e5d..df3f8aa6811 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -894,6 +894,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
 	0xb0, 0xae, -1U
 };
 
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+	0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1560,6 +1567,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkbd_amilo_pa1510_forced_release_keys,
 	},
+	{
+		.ident = "Fujitsu Amilo Xi 3650",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_xi3650_forced_release_keys,
+	},
 	{ }
 };
 
-- 
GitLab


From 705a76d2d22a2824f45f07d023a380293554e989 Mon Sep 17 00:00:00 2001
From: Thierry Reding <thierry.reding@avionic-design.de>
Date: Mon, 11 May 2009 08:36:39 -0700
Subject: [PATCH 1282/1421] Input: tsc2007 - fix locking in hrtimer handler

Now that hrtimers are always running in hard irq context we can't
unconditionally enable interrupts at the end of the timer function.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/tsc2007.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 536668fbda2..948e167557f 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -200,8 +200,9 @@ static int tsc2007_read_values(struct tsc2007 *tsc)
 static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
 {
 	struct tsc2007 *ts = container_of(handle, struct tsc2007, timer);
+	unsigned long flags;
 
-	spin_lock_irq(&ts->lock);
+	spin_lock_irqsave(&ts->lock, flags);
 
 	if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
 		struct input_dev *input = ts->input;
@@ -222,7 +223,7 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
 		tsc2007_send_event(ts);
 	}
 
-	spin_unlock_irq(&ts->lock);
+	spin_unlock_irqrestore(&ts->lock, flags);
 
 	return HRTIMER_NORESTART;
 }
-- 
GitLab


From 1904b03430ade1cd621bb8b6ca8e38819a2f9267 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Thu, 9 Apr 2009 11:59:52 +0200
Subject: [PATCH 1283/1421] i2c-mpc: bug fix for MPC52xx clock setting and
 printout

The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-mpc.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 4af5c09f0e8..dd778d7ae04 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -164,7 +164,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	return 0;
 }
 
-#ifdef CONFIG_PPC_52xx
+#ifdef CONFIG_PPC_MPC52xx
 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 	{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
 	{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
@@ -188,7 +188,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 
 int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
 {
-	const struct mpc52xx_i2c_divider *div = NULL;
+	const struct mpc_i2c_divider *div = NULL;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	u32 divider;
 	int i;
@@ -203,7 +203,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
 	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
 	 * is equal to or lower than the requested speed.
 	 */
-	for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+	for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
 		div = &mpc_i2c_dividers_52xx[i];
 		/* Old MPC5200 rev A CPUs do not support the high bits */
 		if (div->fdr & 0xc0 && pvr == 0x80822011)
@@ -219,20 +219,23 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
 				  struct mpc_i2c *i2c,
 				  u32 clock, u32 prescaler)
 {
-	int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+	int ret, fdr;
+
+	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
-	if (fdr < 0)
-		fdr = 0x3f; /* backward compatibility */
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
-	dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+
+	if (ret >= 0)
+		dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
 }
-#else /* !CONFIG_PPC_52xx */
+#else /* !CONFIG_PPC_MPC52xx */
 static void mpc_i2c_setclock_52xx(struct device_node *node,
 				  struct mpc_i2c *i2c,
 				  u32 clock, u32 prescaler)
 {
 }
-#endif /* CONFIG_PPC_52xx*/
+#endif /* CONFIG_PPC_MPC52xx*/
 
 #ifdef CONFIG_FSL_SOC
 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
@@ -321,14 +324,17 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
 				  struct mpc_i2c *i2c,
 				  u32 clock, u32 prescaler)
 {
-	int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	int ret, fdr;
+
+	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
-	if (fdr < 0)
-		fdr = 0x1031; /* backward compatibility */
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 	writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
-	dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
-		 clock, fdr >> 8, fdr & 0xff);
+
+	if (ret >= 0)
+		dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+			 clock, fdr >> 8, fdr & 0xff);
 }
 
 #else /* !CONFIG_FSL_SOC */
-- 
GitLab


From 89bc5d4a915dc6675961f797de91748bda87efcc Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Apr 2009 17:03:24 +0100
Subject: [PATCH 1284/1421] i2c: Enable i2c-s3c2410 for S3C64XX too

This controller is also present on the S3C64xx series processors so
enable the driver in Kconfig for those platforms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a48c8aee021..f1c6ca7e285 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -467,7 +467,7 @@ config I2C_PXA_SLAVE
 
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
 	help
 	  Say Y here to include support for I2C controller in the
 	  Samsung S3C2410 based System-on-Chip devices.
-- 
GitLab


From 36521c271e5f93b249329ee7f321d27825970e31 Mon Sep 17 00:00:00 2001
From: Mark Ware <mware@elphinstone.net>
Date: Tue, 21 Apr 2009 22:49:02 +1000
Subject: [PATCH 1285/1421] i2c-cpm: Pass dev ptr to dma_*_coherent rather than
 NULL

Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.

Signed-off-by: Mark Ware <mware@elphinstone.net>
[ben-linux@fluff.org: fix patch moves]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-cpm.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3fcf78e906d..b5db8b88361 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -531,16 +531,16 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 	rbdf = cpm->rbase;
 
 	for (i = 0; i < CPM_MAXBD; i++) {
-		cpm->rxbuf[i] = dma_alloc_coherent(
-			NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+		cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
+						   CPM_MAX_READ + 1,
+						   &cpm->rxdma[i], GFP_KERNEL);
 		if (!cpm->rxbuf[i]) {
 			ret = -ENOMEM;
 			goto out_muram;
 		}
 		out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
 
-		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
-			NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
 		if (!cpm->txbuf[i]) {
 			ret = -ENOMEM;
 			goto out_muram;
@@ -585,10 +585,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 out_muram:
 	for (i = 0; i < CPM_MAXBD; i++) {
 		if (cpm->rxbuf[i])
-			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 				cpm->rxbuf[i], cpm->rxdma[i]);
 		if (cpm->txbuf[i])
-			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 				cpm->txbuf[i], cpm->txdma[i]);
 	}
 	cpm_muram_free(cpm->dp_addr);
@@ -619,9 +619,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
 
 	/* Free all memory */
 	for (i = 0; i < CPM_MAXBD; i++) {
-		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 			cpm->rxbuf[i], cpm->rxdma[i]);
-		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 			cpm->txbuf[i], cpm->txdma[i]);
 	}
 
-- 
GitLab


From 8d181018532dd709ec1f789e374cda92d7b01ce1 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Fri, 8 May 2009 07:13:33 -0600
Subject: [PATCH 1286/1421] PCI MSI: Fix MSI-X with NIU cards

The NIU device refuses to allow accesses to MSI-X registers before MSI-X
is enabled.  This patch fixes the problem by moving the read of the mask
register to after MSI-X is enabled.

Reported-by: David S. Miller <davem@davemloft.net>
Tested-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/msi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 6f2e6295e77..362773247fb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev,
 		entry->msi_attrib.default_irq = dev->irq;
 		entry->msi_attrib.pos = pos;
 		entry->mask_base = base;
-		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
 		msix_mask_irq(entry, 1);
 
 		list_add_tail(&entry->list, &dev->msi_list);
@@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev,
 	msix_set_enable(dev, 1);
 	dev->msix_enabled = 1;
 
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		int vector = entry->msi_attrib.entry_nr;
+		entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
+					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+	}
+
 	return 0;
 }
 
-- 
GitLab


From 35e71f90687fd904b43e3427673827ac3e77b4d1 Mon Sep 17 00:00:00 2001
From: Chris Zankel <chris@zankel.net>
Date: Thu, 16 Apr 2009 00:25:39 -0700
Subject: [PATCH 1287/1421] xtensa: Fix architecture specific Kconfig

Move a misplace endmenu marker to enable platform options and
disable PCI and automatic calibrating for the XT2K board. The
on-board PCI bridge is somewhat broken, anyway, and the
calibrating relies on some whacky usage of the serial port.

Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/Kconfig | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index fa6dc4dd3b1..30d21a9e2ef 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -137,6 +137,8 @@ config PCI
 
 source "drivers/pci/Kconfig"
 
+endmenu
+
 menu "Platform options"
 
 choice
@@ -153,8 +155,6 @@ config XTENSA_PLATFORM_ISS
 
 config XTENSA_PLATFORM_XT2000
 	bool "XT2000"
-	select XTENSA_CALIBRATE_CCOUNT
-	select PCI
 	help
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.
@@ -192,8 +192,6 @@ config CMDLINE
 
 source "mm/Kconfig"
 
-endmenu
-
 config HOTPLUG
 	bool "Support for hot-pluggable devices"
 	help
-- 
GitLab


From 7dbe5c542464a511f0ea6a14e3ff08874d7e21d5 Mon Sep 17 00:00:00 2001
From: Chris Zankel <chris@zankel.net>
Date: Thu, 16 Apr 2009 00:28:09 -0700
Subject: [PATCH 1288/1421] xtensa: Fix checksum header file

We need to add a "memory" dependency (barrier) in assembly macros
that access (read or write) memory. Otherwise, the compiler might
ill-optimize the order of memory accesses.

Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/include/asm/checksum.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index f84d3f00774..e4d831a3077 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -113,7 +113,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 	   are modified, we must also specify them as outputs, or gcc
 	   will assume they contain their original values. */
 		: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
-		: "1" (iph), "2" (ihl));
+		: "1" (iph), "2" (ihl)
+		: "memory");
 
 	return	csum_fold(sum);
 }
@@ -227,7 +228,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 		"1:\t"
 		: "=r" (sum), "=&r" (__dummy)
 		: "r" (saddr), "r" (daddr),
-		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "memory");
 
 	return csum_fold(sum);
 }
-- 
GitLab


From 586411dcd1935f91796d5e8a29aa3cfdf01a01f4 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <jw@emlix.com>
Date: Mon, 11 May 2009 15:43:33 +0200
Subject: [PATCH 1289/1421] xtensa: always use correct stack pointer for stack
 traces

Commit '28a0ce7 xtensa: use correct stack pointer for stack traces'
changed the stack tracer from always reading the stack pointer
register to always using the saved value in the task descriptor.

The author was too dense to consider the fact that the saved stack
value is stale for a running process und thus unusable for 'current'.

What we do now is to use the stack pointer register (a1) for when the
task is unknown - we can't help it then - or when the task is
'current'.  For everything else use the saved stack pointer value
contained in the task descriptor.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/kernel/traps.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 9f0b71189e9..ba9ab934978 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -369,6 +369,18 @@ void show_regs(struct pt_regs * regs)
 		       regs->syscall);
 }
 
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+	unsigned long *sp;
+
+	if (!task || task == current)
+		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+	else
+		sp = (unsigned long *)task->thread.sp;
+
+	return sp;
+}
+
 void show_trace(struct task_struct *task, unsigned long *sp)
 {
 	unsigned long a0, a1, pc;
@@ -377,7 +389,7 @@ void show_trace(struct task_struct *task, unsigned long *sp)
 	if (sp)
 		a1 = (unsigned long)sp;
 	else
-		a1 = task->thread.sp;
+		a1 = (unsigned long)stack_pointer(task);
 
 	sp_start = a1 & ~(THREAD_SIZE-1);
 	sp_end = sp_start + THREAD_SIZE;
@@ -420,7 +432,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	unsigned long *stack;
 
 	if (!sp)
-		sp = (unsigned long *)task->thread.sp;
+		sp = stack_pointer(task);
  	stack = sp;
 
 	printk("\nStack: ");
-- 
GitLab


From 1fb137c1e33cd188b40b3c0d7283412efeeb783f Mon Sep 17 00:00:00 2001
From: Johannes Weiner <jw@emlix.com>
Date: Mon, 11 May 2009 15:43:34 +0200
Subject: [PATCH 1290/1421] xtensa: register gpio chip before use

Platform initialization sets up the LED heartbeat that is controlled
via GPIO.  Requesting the GPIO pins fails, however, as the chip is
only initialized later by a device_initcall().

Fix this up by exporting the initialization function.  Let the
platform set up the chip before it starts using it.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/platforms/s6105/setup.c               | 3 +++
 arch/xtensa/variants/s6000/gpio.c                 | 3 +--
 arch/xtensa/variants/s6000/include/variant/gpio.h | 6 ++++++
 3 files changed, 10 insertions(+), 2 deletions(-)
 create mode 100644 arch/xtensa/variants/s6000/include/variant/gpio.h

diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
index ae041d5027a..855ddeadc43 100644
--- a/arch/xtensa/platforms/s6105/setup.c
+++ b/arch/xtensa/platforms/s6105/setup.c
@@ -10,6 +10,8 @@
 #include <asm/bootparam.h>
 
 #include <variant/hardware.h>
+#include <variant/gpio.h>
+
 #include <platform/gpio.h>
 
 void platform_halt(void)
@@ -47,6 +49,7 @@ void __init platform_setup(char **cmdline)
 
 void __init platform_init(bp_tag_t *first)
 {
+	s6_gpio_init();
 	gpio_request(GPIO_LED1_NGREEN, "led1_green");
 	gpio_request(GPIO_LED1_RED, "led1_red");
 	gpio_direction_output(GPIO_LED1_NGREEN, 1);
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 33a8d952934..79317fdcf14 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -64,8 +64,7 @@ static struct gpio_chip gpiochip = {
 	.exported = 0, /* no exporting to userspace */
 };
 
-static int gpio_init(void)
+int s6_gpio_init(void)
 {
 	return gpiochip_add(&gpiochip);
 }
-device_initcall(gpio_init);
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
new file mode 100644
index 00000000000..8327f62167e
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(void);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
-- 
GitLab


From d15f05eb8cc4ad59699c16b8ae834b85c6d39bfe Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Mon, 11 May 2009 15:43:35 +0200
Subject: [PATCH 1291/1421] xtensa: fix wrong extern declaration renamed in
 code using it

The variable ccount_nsec has been renamed to nsec_per_ccount
in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05),
but the fix failed to rename the variable in
arch/xtensa/include/asm/timex.h as well.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/include/asm/timex.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index b83a8181d44..053bc427210 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -39,9 +39,9 @@
 
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 extern unsigned long ccount_per_jiffy;
-extern unsigned long ccount_nsec;
+extern unsigned long nsec_per_ccount;
 #define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT  ccount_nsec
+#define NSEC_PER_CCOUNT  nsec_per_ccount
 #else
 #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
 #define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
-- 
GitLab


From b070a03f6490b0ac8d95c51b55a64e433d9160ab Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Mon, 11 May 2009 15:43:36 +0200
Subject: [PATCH 1292/1421] xtensa: implement ccount calibration for s6000

Calculate core frequency from timers at boot time
instead of assuming a fixed frequency. This is
useful as the true frequency is set up by the
boot loader, thus variable.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/Kconfig                 |  1 +
 arch/xtensa/variants/s6000/Makefile |  1 +
 arch/xtensa/variants/s6000/delay.c  | 27 +++++++++++++++++++++++++++
 3 files changed, 29 insertions(+)
 create mode 100644 arch/xtensa/variants/s6000/delay.c

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 30d21a9e2ef..ebe228d02b0 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -80,6 +80,7 @@ config XTENSA_VARIANT_S6000
 	bool "s6000 - Stretch software configurable processor"
 	select VARIANT_IRQ_SWITCH
 	select ARCH_REQUIRE_GPIOLIB
+	select XTENSA_CALIBRATE_CCOUNT
 endchoice
 
 config XTENSA_UNALIGNED_USER
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
index 03b3975468b..d83f3805130 100644
--- a/arch/xtensa/variants/s6000/Makefile
+++ b/arch/xtensa/variants/s6000/Makefile
@@ -1,3 +1,4 @@
 # s6000 Makefile
 
 obj-y		+= irq.o gpio.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT)	+= delay.o
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
new file mode 100644
index 00000000000..54b2b573f16
--- /dev/null
+++ b/arch/xtensa/variants/s6000/delay.c
@@ -0,0 +1,27 @@
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+	u32 uninitialized_var(a);
+	u32 uninitialized_var(u);
+	u32 b;
+	u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+	int i = LOOPS+1;
+	do {
+		u32 t = u;
+		asm volatile(
+		"1:	l32i %0, %2, 0 ;"
+		"	beq %0, %1, 1b ;"
+		: "=&a"(u) : "a"(t), "a"(tstamp));
+		b = xtensa_get_ccount();
+		if (i == LOOPS)
+			a = b;
+	} while (--i >= 0);
+	b -= a;
+	nsec_per_ccount = (LOOPS * 10000) / b;
+	ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
-- 
GitLab


From 866e514d6a584810dc3ae25364f823b890b7d312 Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Mon, 11 May 2009 15:43:37 +0200
Subject: [PATCH 1293/1421] xtensa: update s6105_defconfig for ccount
 calibration

The previous patch enabled ccount calibration for the s6000 variant.
This patch updates the defconfig for the s6105 platform to reflect this
change.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/configs/s6105_defconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 6e1deff4159..768bee00603 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -115,7 +115,7 @@ CONFIG_XTENSA_VARIANT_S6000=y
 CONFIG_PREEMPT=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_HIGHMEM is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
 CONFIG_SERIAL_CONSOLE=y
 # CONFIG_XTENSA_ISS_NETWORK is not set
 
@@ -131,7 +131,6 @@ CONFIG_SERIAL_CONSOLE=y
 # CONFIG_XTENSA_PLATFORM_ISS is not set
 # CONFIG_XTENSA_PLATFORM_XT2000 is not set
 CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_XTENSA_CPU_CLOCK=300
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
-- 
GitLab


From 78f3cdfa2ac0aa2b72b3ee7e4b3c3e550230179f Mon Sep 17 00:00:00 2001
From: Chris Zankel <chris@zankel.net>
Date: Tue, 21 Apr 2009 00:34:15 -0700
Subject: [PATCH 1294/1421] xtensa: Fix linker script to include .literal
 sections

Fix resembles implementation from Marc Gauthier and Piet Denaly:

In the Xtensa architecture, assembly generates literals which must always
precede the code (the L32R instruction that loads them only uses negative
PC-relative offsets).  For any *.text section, literals are placed in a
corresponding *.literal section.  The linker script (vmlinux.lds) must
place these in the correct order.  It must also combine them, when the
*.text section can be larger than L32R's 256 kB range.

For example, this doesn't work:  *(.literal) *(.text) because L32R
instructions at the end of .text can't reach the literals.

The linker can solve this if they are combined in parentheses, like this:
       *(.literal .text)
because it is now allowed mix literals in .text to bring them in range.

None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT
and INIT_TEXT.  To avoid replicating the logic of that header file, we
instead post-process the generated linker script to convert *(xxx.text)
to *(xxx.literal xxx.text) for the following text sections:
       .text .ref.text .*init.text .*exit.text .text.*
using a sed script.  To do this we must override the default rule for
vmlinux.lds (see scripts/Makefile.build and the top-level Makefile)
to insert this extra step.

Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Pete Delaney <piet@tensilica.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/kernel/Makefile      | 21 ++++++++++++++++++---
 arch/xtensa/kernel/vmlinux.lds.S |  4 +---
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 7419dbccf02..fe3186de6a3 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -4,15 +4,30 @@
 
 extra-y := head.o vmlinux.lds
 
-
 obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
 	 setup.o signal.o syscall.o time.o traps.o vectors.o platform.o  \
 	 pci-dma.o init_task.o io.o
 
-## windowspill.o
-
 obj-$(CONFIG_KGDB) += xtensa-stub.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
 
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to  *(xxx.literal xxx.text) for the following text sections:
+#   .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g'	\
+	-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS     $@
+      cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
 
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+	$(call if_changed_dep,_cpp_lds_S)
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 5accf51053d..41c159cd872 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -87,7 +87,7 @@ SECTIONS
   {
     /* The HEAD_TEXT section must be the first section! */
     HEAD_TEXT
-    *(.literal .text)
+    TEXT_TEXT
     VMLINUX_SYMBOL(__sched_text_start) = .;
     *(.sched.literal .sched.text)
     VMLINUX_SYMBOL(__sched_text_end) = .;
@@ -139,8 +139,6 @@ SECTIONS
   __init_begin = .;
   .init.text : {
   	_sinittext = .;
-	*(.init.literal) *(.cpuinit.literal) 
-	*(.devinit.literal) *(.meminit.literal)
 	INIT_TEXT
 	_einittext = .;
   }
-- 
GitLab


From af498d7fa3e786f52650819a56e117ed9a40920c Mon Sep 17 00:00:00 2001
From: Kazuhisa Ichikawa <ki@epsilou.com>
Date: Tue, 12 May 2009 13:27:45 +0200
Subject: [PATCH 1295/1421] block: fix the bio_vec array index out-of-bounds
 test

Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)

Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 2998fe3a237..c89883be873 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1768,10 +1768,10 @@ static int __end_that_request_first(struct request *req, int error,
 		} else {
 			int idx = bio->bi_idx + next_idx;
 
-			if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
+			if (unlikely(idx >= bio->bi_vcnt)) {
 				blk_dump_rq_flags(req, "__end_that");
 				printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
-				       __func__, bio->bi_idx, bio->bi_vcnt);
+				       __func__, idx, bio->bi_vcnt);
 				break;
 			}
 
-- 
GitLab


From 05dc7b613481c695bb4fc476c6fbb46364b63f62 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Tue, 12 May 2009 13:28:23 +0200
Subject: [PATCH 1296/1421] viocd: needs to depend on BLOCK

Fix this build error when CONFIG_BLOCK is not set:
drivers/cdrom/viocd.c: In function 'viocd_blk_open':
drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_release':
drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl':
drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed':
drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type
...

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 arch/powerpc/platforms/iseries/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 647e8778743..47a20cfb448 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -17,6 +17,7 @@ config VIODASD
 
 config VIOCD
 	tristate "iSeries Virtual I/O CD support"
+	depends on BLOCK
 	select VIOPATH
 	help
 	  If you are running Linux on an IBM iSeries system and you want to
-- 
GitLab


From 34fd5dad46fc494c6ed3b174b2c991ea9961ebe9 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 12 May 2009 11:33:39 +0100
Subject: [PATCH 1297/1421] Remove unreached code in drivers/net/mlx4/en_rx.c

Remove the return after the goto.  We want the goto because it frees
memory as well as returning err.

Found by smatch (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/mlx4/en_rx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 7942c4d3cd8..9ee873e872b 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -951,7 +951,6 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
 	if (err) {
 		mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
 		goto out;
-		return err;
 	}
 	qp->event = mlx4_en_sqp_event;
 
-- 
GitLab


From f29ce72795bf335553ab972606bc576b5473995e Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Tue, 12 May 2009 09:08:31 -0700
Subject: [PATCH 1298/1421] drm/i915: automatically select FRAMEBUFFER_CONSOLE
 if !EMBEDDED

People keep getting bitten by this, so just auto-select it by default,
assuming most configurations will actually want a console.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3a22eb9be37..17b24c580c0 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -71,6 +71,7 @@ config DRM_I915
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select FB
+	select FRAMEBUFFER_CONSOLE if !EMBEDDED
 	tristate "i915 driver"
 	help
 	  Choose this option if you have a system that has Intel 830M, 845G,
-- 
GitLab


From 9c1ee184a30394e54165fa4c15923cabd952c106 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Wed, 13 May 2009 18:36:58 -0400
Subject: [PATCH 1299/1421] ext4: Fix sub-block zeroing for writes into
 preallocated extents

We need to mark the buffer_head mapping preallocated space as new
during write_begin. Otherwise we don't zero out the page cache content
properly for a partial write. This will cause file corruption with
preallocation.

Now that we mark the buffer_head new we also need to have a valid
buffer_head blocknr so that unmap_underlying_metadata() unmaps the
correct block.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/extents.c | 2 ++
 fs/ext4/inode.c   | 7 +++++++
 2 files changed, 9 insertions(+)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e4033215834..172656c2a3b 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2875,6 +2875,8 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 				if (allocated > max_blocks)
 					allocated = max_blocks;
 				set_buffer_unwritten(bh_result);
+				bh_result->b_bdev = inode->i_sb->s_bdev;
+				bh_result->b_blocknr = newblock;
 				goto out2;
 			}
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index e91f978c7f1..d4b634ae06b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2323,6 +2323,13 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 		set_buffer_delay(bh_result);
 	} else if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
+		/*
+		 * With sub-block writes into unwritten extents
+		 * we also need to mark the buffer as new so that
+		 * the unwritten parts of the buffer gets correctly zeroed.
+		 */
+		if (buffer_unwritten(bh_result))
+			set_buffer_new(bh_result);
 		ret = 0;
 	}
 
-- 
GitLab


From 33b9817e2ae097c7b8d256e3510ac6c54fc6d9d0 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 12 May 2009 14:40:37 -0400
Subject: [PATCH 1300/1421] ext4: Use a fake block number for delayed new
 buffer_head

Use a very large unsigned number (~0xffff) as as the fake block number
for the delayed new buffer. The VFS should never try to write out this
number, but if it does, this will make it obvious.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d4b634ae06b..0ac31a06422 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2297,6 +2297,10 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 				  struct buffer_head *bh_result, int create)
 {
 	int ret = 0;
+	sector_t invalid_block = ~((sector_t) 0xffff);
+
+	if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+		invalid_block = ~0;
 
 	BUG_ON(create == 0);
 	BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
@@ -2318,7 +2322,7 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 			/* not enough space to reserve */
 			return ret;
 
-		map_bh(bh_result, inode->i_sb, 0);
+		map_bh(bh_result, inode->i_sb, invalid_block);
 		set_buffer_new(bh_result);
 		set_buffer_delay(bh_result);
 	} else if (ret > 0) {
-- 
GitLab


From 7348d82a67b3fe0363e7f0679b50ecbdc65116c7 Mon Sep 17 00:00:00 2001
From: Daniel Ribeiro <drwyrm@gmail.com>
Date: Tue, 12 May 2009 13:19:36 -0700
Subject: [PATCH 1301/1421] pxa2xx_spi: prevent panic case setup() fails

setup() may fail before ctldata is set, causing a kernel panic on
cleanup().

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 885194a0741..3f3c08c6ba4 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1373,6 +1373,9 @@ static void cleanup(struct spi_device *spi)
 {
 	struct chip_data *chip = spi_get_ctldata(spi);
 
+	if (!chip)
+		return;
+
 	if (gpio_is_valid(chip->gpio_cs))
 		gpio_free(chip->gpio_cs);
 
-- 
GitLab


From ecf4667d30dd63fa130e22f8f2da3e6ce003358b Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 12 May 2009 13:19:37 -0700
Subject: [PATCH 1302/1421] syscalls.h add the missing sys_pipe2 declaration

In order to build the generic syscall table, we need a declaration for
every system call.  sys_pipe2 was added without a proper declaration, so
add this to syscalls.h now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/syscalls.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 40617c1d897..30520844b8d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -433,6 +433,7 @@ asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
 asmlinkage long sys_fcntl64(unsigned int fd,
 				unsigned int cmd, unsigned long arg);
 #endif
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
 asmlinkage long sys_dup(unsigned int fildes);
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
 asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
-- 
GitLab


From f993004d73f266a02f3ac736fafb033c600972d9 Mon Sep 17 00:00:00 2001
From: Kim Kyuwon <q1.kim@samsung.com>
Date: Tue, 12 May 2009 13:19:38 -0700
Subject: [PATCH 1303/1421] rtc: rtc-twl4030 don't mask alarm interrupts on
 suspend

This patch enables the alarm interrupt of TWL4030 RTC to wake up the
system from suspend. You can test this patch with following command.

# echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state;

Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-twl4030.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index a6341e4f9a0..9c8c70c497d 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -495,9 +495,7 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	irqstat = rtc_irq_bits;
 
-	/* REVISIT alarm may need to wake us from sleep */
-	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
-			 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 	return 0;
 }
 
-- 
GitLab


From 9aa7a7d5daa7e33d7e7656bffe76af67c1bf56d2 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 12 May 2009 13:19:39 -0700
Subject: [PATCH 1304/1421] alpha: unbreak percpu again

Commit 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e ("FRV: Fix the section
attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU()
macros and in the process made alpha percpu.h include
include/asm-generic/percpu.h which breaks compilation due to duplicate
definitions.

Remove inclusion of generic asm helper file and define whatever necessary
in alpha header proper.

In the longer term, percpu definitions will be unified and all these
little subtlties will be removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/percpu.h | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index e9e0bb5a23b..06c5c7a4afd 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */
-- 
GitLab


From ee83126bb17f6216e8815a4146e80032b4d80ba4 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Tue, 12 May 2009 13:19:41 -0700
Subject: [PATCH 1305/1421] fbdev: remove outdated advice about I2C
 configuration

The required I2C modules are now selected automatically by the means
of select statements in Kconfig, so there is no point in confusing the
users with options he/she would be supposed to enable manually.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/Kconfig | 23 ++++-------------------
 1 file changed, 4 insertions(+), 19 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7826bdce4bb..0048f1185a6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1128,13 +1128,6 @@ config FB_INTEL
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
           Say Y if you have and plan to use such a board.
 
-	  If you say Y here and want DDC/I2C support you must first say Y to
-	  "I2C support" and "I2C bit-banging support" in the character devices
-	  section.
-
-	  If you say M here then "I2C support" and "I2C bit-banging support"
-	  can be build either as modules or built-in.
-
 	  To compile this driver as a module, choose M here: the
 	  module will be called intelfb.
 
@@ -1207,11 +1200,10 @@ config FB_MATROX_G
 	  pixel and 32 bpp packed pixel. You can also use font widths
 	  different from 8.
 
-	  If you need support for G400 secondary head, you must first say Y to
-	  "I2C support" in the character devices section, and then to
-	  "Matrox I2C support" and "G400 second head support" here in the
-	  framebuffer section. G450/G550 secondary head and digital output
-	  are supported without additional modules.
+	  If you need support for G400 secondary head, you must say Y to
+	  "Matrox I2C support" and "G400 second head support" right below.
+	  G450/G550 secondary head and digital output are supported without
+	  additional modules.
 
 	  The driver starts in monitor mode. You must use the matroxset tool 
 	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
@@ -1310,13 +1302,6 @@ config FB_RADEON
 	  a framebuffer device.  There are both PCI and AGP versions.  You
 	  don't need to choose this to run the Radeon in plain VGA mode.
 
-	  If you say Y here and want DDC/I2C support you must first say Y to
-	  "I2C support" and "I2C bit-banging support" in the character devices
-	  section.
-
-	  If you say M here then "I2C support" and "I2C bit-banging support" 
-	  can be build either as modules or built-in.
-
 	  There is a product page at
 	  http://apps.ati.com/ATIcompare/
 
-- 
GitLab


From ee1ef82c7e6d073f881952348960bbc639687482 Mon Sep 17 00:00:00 2001
From: Harald Welte <HaraldWelte@viatech.com>
Date: Tue, 12 May 2009 13:19:42 -0700
Subject: [PATCH 1306/1421] viafb: make it work on x86_64

Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU).

You cannot make the assumption that sizeof(unsigned int) ==
sizeof(unsigned long), so the parsing of the default mode (640x480) fails,
leading to a division by zero during insmod of the driver.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Cc: <JosephChan@via.com.tw>
Cc: <ScottFang@viatech.com.cn>
Cc: Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/via/viafbdev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index e327b84820d..a0fec298216 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -2103,7 +2103,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
 
 static int __devinit via_pci_probe(void)
 {
-	unsigned int default_xres, default_yres;
+	unsigned long default_xres, default_yres;
 	char *tmpc, *tmpm;
 	char *tmpc_sec, *tmpm_sec;
 	int vmode_index;
@@ -2196,8 +2196,8 @@ static int __devinit via_pci_probe(void)
 	viafb_FB_MM = viaparinfo->fbmem_virt;
 	tmpm = viafb_mode;
 	tmpc = strsep(&tmpm, "x");
-	strict_strtoul(tmpc, 0, (unsigned long *)&default_xres);
-	strict_strtoul(tmpm, 0, (unsigned long *)&default_yres);
+	strict_strtoul(tmpc, 0, &default_xres);
+	strict_strtoul(tmpm, 0, &default_yres);
 
 	vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
 	DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
-- 
GitLab


From bfe3891a5f5d3b78146a45f40e435d14f5ae39dd Mon Sep 17 00:00:00 2001
From: Davide Libenzi <davidel@xmailserver.org>
Date: Tue, 12 May 2009 13:19:44 -0700
Subject: [PATCH 1307/1421] epoll: fix size check in epoll_create()

Fix a size check WRT the manual pages.  This was inadvertently broken by
commit 9fe5ad9c8cef9ad5873d8ee55d1cf00d9b607df0 ("flag parameters
add-on: remove epoll_create size param").

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: <Hiroyuki.Mach@gmail.com>
Cc: rohit verma <rohit.170309@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/eventpoll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index a89f370fadb..5458e80fc55 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1212,7 +1212,7 @@ SYSCALL_DEFINE1(epoll_create1, int, flags)
 
 SYSCALL_DEFINE1(epoll_create, int, size)
 {
-	if (size < 0)
+	if (size <= 0)
 		return -EINVAL;
 
 	return sys_epoll_create1(0);
-- 
GitLab


From 4f005dbe5584fe54c9f6d6d4f0acd3fb29be84da Mon Sep 17 00:00:00 2001
From: Maciej Sosnowski <maciej.sosnowski@intel.com>
Date: Thu, 23 Apr 2009 12:31:51 +0200
Subject: [PATCH 1308/1421] ioatdma: fix "ioatdma frees DMA memory with wrong
 function"

as reported by Alexander Beregalov <a.beregalov@gmail.com>

ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with
wrong function [device address=0x000000007f76f800] [size=2000 bytes]
[map
ped as single] [unmapped as page]

The ioatdma driver was unmapping all regions
(either allocated as page or single) using unmap_page.
This patch lets dma driver recognize if unmap_single or unmap_page should be used.
It introduces two new dma control flags:
DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE.
They should be set to indicate dma driver to do dma-unmapping as single
(first one for the source, tha latter for the destination).
If respective flag is not set, the driver assumes dma-unmapping as page.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmaengine.c   | 17 +++++++++------
 drivers/dma/ioat_dma.c    | 45 ++++++++++++++++++++++++---------------
 include/linux/dmaengine.h |  6 ++++++
 3 files changed, 45 insertions(+), 23 deletions(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 92438e9dacc..5a87384ea4f 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -804,11 +804,14 @@ dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest,
 	dma_addr_t dma_dest, dma_src;
 	dma_cookie_t cookie;
 	int cpu;
+	unsigned long flags;
 
 	dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE);
 	dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE);
-	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
-					 DMA_CTRL_ACK);
+	flags = DMA_CTRL_ACK |
+		DMA_COMPL_SRC_UNMAP_SINGLE |
+		DMA_COMPL_DEST_UNMAP_SINGLE;
+	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
 
 	if (!tx) {
 		dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -850,11 +853,12 @@ dma_async_memcpy_buf_to_pg(struct dma_chan *chan, struct page *page,
 	dma_addr_t dma_dest, dma_src;
 	dma_cookie_t cookie;
 	int cpu;
+	unsigned long flags;
 
 	dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE);
 	dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE);
-	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
-					 DMA_CTRL_ACK);
+	flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE;
+	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
 
 	if (!tx) {
 		dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -898,12 +902,13 @@ dma_async_memcpy_pg_to_pg(struct dma_chan *chan, struct page *dest_pg,
 	dma_addr_t dma_dest, dma_src;
 	dma_cookie_t cookie;
 	int cpu;
+	unsigned long flags;
 
 	dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE);
 	dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len,
 				DMA_FROM_DEVICE);
-	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
-					 DMA_CTRL_ACK);
+	flags = DMA_CTRL_ACK;
+	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
 
 	if (!tx) {
 		dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE);
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index e4fc33c1c32..1955ee8d6d2 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1063,22 +1063,31 @@ static void ioat_dma_cleanup_tasklet(unsigned long data)
 static void
 ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
 {
-	/*
-	 * yes we are unmapping both _page and _single
-	 * alloc'd regions with unmap_page. Is this
-	 * *really* that bad?
-	 */
-	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP))
-		pci_unmap_page(ioat_chan->device->pdev,
-				pci_unmap_addr(desc, dst),
-				pci_unmap_len(desc, len),
-				PCI_DMA_FROMDEVICE);
-
-	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP))
-		pci_unmap_page(ioat_chan->device->pdev,
-				pci_unmap_addr(desc, src),
-				pci_unmap_len(desc, len),
-				PCI_DMA_TODEVICE);
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+			pci_unmap_single(ioat_chan->device->pdev,
+					 pci_unmap_addr(desc, dst),
+					 pci_unmap_len(desc, len),
+					 PCI_DMA_FROMDEVICE);
+		else
+			pci_unmap_page(ioat_chan->device->pdev,
+				       pci_unmap_addr(desc, dst),
+				       pci_unmap_len(desc, len),
+				       PCI_DMA_FROMDEVICE);
+	}
+
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+			pci_unmap_single(ioat_chan->device->pdev,
+					 pci_unmap_addr(desc, src),
+					 pci_unmap_len(desc, len),
+					 PCI_DMA_TODEVICE);
+		else
+			pci_unmap_page(ioat_chan->device->pdev,
+				       pci_unmap_addr(desc, src),
+				       pci_unmap_len(desc, len),
+				       PCI_DMA_TODEVICE);
+	}
 }
 
 /**
@@ -1363,6 +1372,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 	int err = 0;
 	struct completion cmp;
 	unsigned long tmo;
+	unsigned long flags;
 
 	src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
 	if (!src)
@@ -1392,8 +1402,9 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 				 DMA_TO_DEVICE);
 	dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
 				  DMA_FROM_DEVICE);
+	flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
 	tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
-						   IOAT_TEST_SIZE, 0);
+						   IOAT_TEST_SIZE, flags);
 	if (!tx) {
 		dev_err(&device->pdev->dev,
 			"Self-test prep failed, disabling\n");
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 2e2aa3df170..ffefba81c81 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -78,12 +78,18 @@ enum dma_transaction_type {
  * 	dependency chains
  * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
  * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
+ * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
+ * 	(if not set, do the source dma-unmapping as page)
+ * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
+ * 	(if not set, do the destination dma-unmapping as page)
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
 	DMA_CTRL_ACK = (1 << 1),
 	DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
 	DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
+	DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
+	DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
 };
 
 /**
-- 
GitLab


From ad567ffb32f067b30606071eb568cf637fe42185 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 12 May 2009 09:16:29 +0200
Subject: [PATCH 1309/1421] dma: fix ipu_idmac.c to not discard the last queued
 buffer

This also fixes the case of a single queued buffer, for example, when taking a
single frame snapshot with the mx3_camera driver.

Reported-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Tested-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ipu/ipu_idmac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 3a4deea78a7..9a5bc1a7389 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1272,7 +1272,8 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id)
 	/* Other interrupts do not interfere with this channel */
 	spin_lock(&ichan->lock);
 	if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
-		     ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+		     ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
+		     !list_is_last(ichan->queue.next, &ichan->queue))) {
 		int i = 100;
 
 		/* This doesn't help. See comment in ipu_disable_channel() */
-- 
GitLab


From a37b06d589f2c687a38d07569f4ef97c650fde39 Mon Sep 17 00:00:00 2001
From: Doug Chapman <doug.chapman@hp.com>
Date: Wed, 13 May 2009 02:56:39 +0100
Subject: [PATCH 1310/1421] Squashfs: fix breakage when page size > metadata
 block size

Squashfs is broken on any system where the page size is larger than
the metadata size (8192).  This is easily fixed by ensuring cache->pages
is always > 0.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
---
 fs/squashfs/cache.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index 1c4739e33af..40c98fa6b5d 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -252,6 +252,7 @@ struct squashfs_cache *squashfs_cache_init(char *name, int entries,
 	cache->entries = entries;
 	cache->block_size = block_size;
 	cache->pages = block_size >> PAGE_CACHE_SHIFT;
+	cache->pages = cache->pages ? cache->pages : 1;
 	cache->name = name;
 	cache->num_waiters = 0;
 	spin_lock_init(&cache->lock);
-- 
GitLab


From fffb47b80e8bb3f171ef02b90b1ae22c63983979 Mon Sep 17 00:00:00 2001
From: Phillip Lougher <phillip@lougher.demon.co.uk>
Date: Wed, 13 May 2009 02:59:26 +0100
Subject: [PATCH 1311/1421] Squashfs: check page size is not larger than the
 filesystem block size

Normally the block size (by default 128K) will be larger than the
page size, unless a non-standard block size has been specified in
Mksquashfs, and the page size is larger than 4K.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
---
 fs/squashfs/super.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index ffa6edcd2d0..0adc624c956 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -157,6 +157,16 @@ static int squashfs_fill_super(struct super_block *sb, void *data, int silent)
 	if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE)
 		goto failed_mount;
 
+	/*
+	 * Check the system page size is not larger than the filesystem
+	 * block size (by default 128K).  This is currently not supported.
+	 */
+	if (PAGE_CACHE_SIZE > msblk->block_size) {
+		ERROR("Page size > filesystem block size (%d).  This is "
+			"currently not supported!\n", msblk->block_size);
+		goto failed_mount;
+	}
+
 	msblk->block_log = le16_to_cpu(sblk->block_log);
 	if (msblk->block_log > SQUASHFS_FILE_MAX_LOG)
 		goto failed_mount;
-- 
GitLab


From e5d287539dba264a1d9d7607a25b8c8c61c9d658 Mon Sep 17 00:00:00 2001
From: Phillip Lougher <phillip@lougher.demon.co.uk>
Date: Wed, 13 May 2009 03:25:20 +0100
Subject: [PATCH 1312/1421] Squashfs: cody tidying, remove commented out line
 in Makefile

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
---
 fs/squashfs/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index 8258cf9a031..70e3244fa30 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -5,4 +5,3 @@
 obj-$(CONFIG_SQUASHFS) += squashfs.o
 squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
 squashfs-y += namei.o super.o symlink.o
-#squashfs-y += squashfs2_0.o
-- 
GitLab


From f2deae9d4e70793568ef9e85d227abb7bef5b622 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 13 May 2009 15:56:10 +0100
Subject: [PATCH 1313/1421] Remove implementation of readpage from the
 hugetlbfs_aops

The core VM assumes the page size used by the address_space in
inode->i_mapping is PAGE_SIZE but hugetlbfs breaks this assumption by
inserting pages into the page cache at offsets the core VM considers
unexpected.

This would not be a problem except that hugetlbfs also provide a
->readpage implementation.  As it exists, the core VM can assume the
base page size is being used, allocate pages on behalf of the
filesystem, insert them into the page cache and call ->readpage to
populate them.  These pages are the wrong size and at the wrong offset
for hugetlbfs causing confusion.

This patch deletes the ->readpage implementation for hugetlbfs on the
grounds the core VM should not be allocating and populating pages on
behalf of hugetlbfs.  There should be no existing users of the
->readpage implementation so it should not cause a regression.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 153d9681192..c1462d43e72 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -312,16 +312,6 @@ out:
 	return retval;
 }
 
-/*
- * Read a page. Again trivial. If it didn't already exist
- * in the page cache, it is zero-filled.
- */
-static int hugetlbfs_readpage(struct file *file, struct page * page)
-{
-	unlock_page(page);
-	return -EINVAL;
-}
-
 static int hugetlbfs_write_begin(struct file *file,
 			struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned flags,
@@ -701,7 +691,6 @@ static void hugetlbfs_destroy_inode(struct inode *inode)
 }
 
 static const struct address_space_operations hugetlbfs_aops = {
-	.readpage	= hugetlbfs_readpage,
 	.write_begin	= hugetlbfs_write_begin,
 	.write_end	= hugetlbfs_write_end,
 	.set_page_dirty	= hugetlbfs_set_page_dirty,
-- 
GitLab


From 0f181328287db30671e9997329cff71395d4af8b Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 13 May 2009 08:29:12 -0700
Subject: [PATCH 1314/1421] Revert "Ignore madvise(MADV_WILLNEED) for
 hugetlbfs-backed regions"

This reverts commit a425a638c858fd10370b573bde81df3ba500e271.

Now that the previous commit removed the "readpage" actor for hugetlb
files, read-ahead will no longer mess up the mapping, and there's no
longer any reason to treat hugetlbfs mappings specially.

Tested-and-acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/madvise.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/mm/madvise.c b/mm/madvise.c
index 36d6ea2b634..b9ce574827c 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -112,14 +112,6 @@ static long madvise_willneed(struct vm_area_struct * vma,
 	if (!file)
 		return -EBADF;
 
-	/*
-	 * Page cache readahead assumes page cache pages are order-0 which
-	 * is not the case for hugetlbfs. Do not give a bad return value
-	 * but ignore the advice.
-	 */
-	if (vma->vm_flags & VM_HUGETLB)
-		return 0;
-
 	if (file->f_mapping->a_ops->get_xip_mem) {
 		/* no bad return value, but ignore advice */
 		return 0;
-- 
GitLab


From fa0b5596a69795c2cc4c937b35ee1b7a40bf9462 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:24:24 -0500
Subject: [PATCH 1315/1421] powerpc/83xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/83xx/asp8347_defconfig   | 104 +++++++++++-----
 .../configs/83xx/mpc8313_rdb_defconfig        | 114 ++++++++++++-----
 .../configs/83xx/mpc8315_rdb_defconfig        | 114 ++++++++++++-----
 .../configs/83xx/mpc832x_mds_defconfig        | 107 ++++++++++++----
 .../configs/83xx/mpc832x_rdb_defconfig        | 113 ++++++++++++-----
 .../configs/83xx/mpc834x_itx_defconfig        | 108 +++++++++++-----
 .../configs/83xx/mpc834x_itxgp_defconfig      | 108 +++++++++++-----
 .../configs/83xx/mpc834x_mds_defconfig        | 103 ++++++++++++----
 .../configs/83xx/mpc836x_mds_defconfig        | 108 ++++++++++++----
 .../configs/83xx/mpc836x_rdk_defconfig        |  96 +++++++++++----
 .../configs/83xx/mpc837x_mds_defconfig        | 104 ++++++++++++----
 .../configs/83xx/mpc837x_rdb_defconfig        | 111 ++++++++++++-----
 arch/powerpc/configs/83xx/sbc834x_defconfig   |  96 +++++++++++----
 arch/powerpc/configs/mpc83xx_defconfig        | 115 +++++++++++++-----
 14 files changed, 1115 insertions(+), 386 deletions(-)

diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index fc4a39a40e7..27893971377 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:47 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:05 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -565,6 +586,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -608,7 +633,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -796,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -810,11 +832,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1100,6 +1127,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1248,11 +1281,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 409d017621a..c5c0fe71a43 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,6 +685,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -942,6 +970,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -957,12 +986,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -981,6 +1013,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -1077,7 +1110,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1329,6 +1363,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1442,11 +1482,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 03db97c6cf3..af4952feba3 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:49 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -721,6 +746,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1003,6 +1031,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1018,12 +1047,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1042,6 +1074,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -1138,7 +1171,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1390,6 +1424,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1503,11 +1543,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index fb17de53cc0..8c8f660b4fc 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:50 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:07 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -548,6 +573,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -790,6 +818,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -804,11 +833,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -906,7 +938,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1021,6 +1054,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index a012ce23520..227dbba7679 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:52 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:08 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -551,6 +577,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -570,6 +598,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -580,14 +609,15 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -820,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -835,12 +865,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -859,6 +892,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -955,7 +989,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1132,6 +1167,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 4bcc4a1ff30..24ee7fcac87 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1245,6 +1273,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 9ba5518ce8d..7f39543205a 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:10 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1124,6 +1152,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 18e4bc0b3c1..1cd1fcac22c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:11 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -476,6 +498,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -731,6 +755,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -745,11 +770,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -847,7 +875,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -962,6 +991,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 76db8138eac..ce5177393a0 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:58 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_ASP834x is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -293,7 +308,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -630,6 +654,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -872,6 +899,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -886,11 +914,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1019,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1103,6 +1135,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 0dc11c44306..7f1d1383a24 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:13 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_ASP834x is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -924,6 +945,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -956,7 +978,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -998,6 +1021,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_UCC_SLOW=y
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1110,11 +1139,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index e42f6b3917d..bf636fd560a 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -608,6 +633,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +875,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -862,11 +890,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -964,7 +995,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1025,6 +1057,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 408022f79a5..fe6454eacbd 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:14 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -614,6 +639,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -657,7 +686,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +873,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -862,11 +888,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -976,15 +1005,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1139,6 +1172,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a0c42fb65cb..fe08f672cb2 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_SBC834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -292,7 +307,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -474,6 +496,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -517,7 +543,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -697,6 +719,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -711,11 +734,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -813,7 +839,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -848,6 +874,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 45f03cad8db..433c303eb82 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:36 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -58,6 +59,7 @@ CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +318,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +738,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -992,6 +1019,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1006,11 +1034,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
@@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1285,6 +1322,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
GitLab


From 0ae0e7edf8c93c399b37d41e647ecc9ed13f0b9c Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:24:50 -0500
Subject: [PATCH 1316/1421] powerpc/85xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/85xx/ksi8560_defconfig   |  86 +++-
 .../configs/85xx/mpc8540_ads_defconfig        |  82 +++-
 .../configs/85xx/mpc8560_ads_defconfig        |  89 +++-
 .../configs/85xx/mpc85xx_cds_defconfig        |  88 +++-
 arch/powerpc/configs/85xx/sbc8548_defconfig   |  84 +++-
 arch/powerpc/configs/85xx/sbc8560_defconfig   |  83 +++-
 arch/powerpc/configs/85xx/socrates_defconfig  | 385 ++++++++++++++----
 arch/powerpc/configs/85xx/stx_gp3_defconfig   | 105 +++--
 arch/powerpc/configs/85xx/tqm8540_defconfig   | 100 +++--
 arch/powerpc/configs/85xx/tqm8541_defconfig   | 101 +++--
 arch/powerpc/configs/85xx/tqm8548_defconfig   |  64 ++-
 arch/powerpc/configs/85xx/tqm8555_defconfig   | 101 +++--
 arch/powerpc/configs/85xx/tqm8560_defconfig   | 101 +++--
 13 files changed, 1118 insertions(+), 351 deletions(-)

diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 6479bb9f3f5..09146ddaa3c 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:16 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -163,6 +174,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y
 # CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -544,6 +565,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -663,6 +685,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -726,7 +749,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -785,6 +809,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 905e8a3388d..7b43be7586b 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,16 +126,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -432,6 +452,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -441,6 +463,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -607,7 +629,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -665,6 +688,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -922,6 +961,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 095e2ded6e8..62adb71a5d4 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:09 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -470,6 +491,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +516,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -503,10 +527,12 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -651,6 +679,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -719,7 +748,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -780,6 +810,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index f95961c04a2..41209e3a654 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:18 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,16 +127,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -521,6 +543,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -540,6 +564,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -550,10 +575,12 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -750,7 +778,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -811,6 +840,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index e68e80987aa..6c36c9c7abf 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:15 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:19 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -461,6 +482,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -716,6 +744,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -784,6 +817,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -918,6 +965,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index b1c766ef7e2..4aaf1a6bdc7 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -439,6 +461,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -603,7 +625,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -691,6 +713,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -958,6 +996,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 0cc9048290a..79984589db6 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-# Sat Oct 18 11:06:13 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:21 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,12 +178,14 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -181,14 +201,16 @@ CONFIG_MPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_OLD_DRIVERS is not set
-# CONFIG_CAN_SLCAN is not set
-CONFIG_CAN_SJA1000=y
-CONFIG_CAN_SJA1000_MEM_OF=y
-# CONFIG_CAN_EMS_PCI is not set
-# CONFIG_CAN_IXXAT_PCI is not set
-# CONFIG_CAN_PEAK_PCI is not set
-# CONFIG_CAN_KVASER_PCI is not set
-# CONFIG_CAN_MSCAN is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -378,6 +402,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
 CONFIG_MTD_NAND_SOCRATES=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -581,22 +630,28 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_TSC2003=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -734,44 +806,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_SOCRATES=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -893,6 +1002,7 @@ CONFIG_DAB=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -988,9 +1098,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
-CONFIG_RTC_DRV_RX8025=y
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_PPC=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1189,6 +1349,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index eb4ba7a5f41..bd1bfcddbd0 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,6 +184,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
@@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_LOG is not set
 # CONFIG_IP_NF_TARGET_ULOG is not set
 # CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
 # CONFIG_IP_NF_RAW is not set
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
@@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -837,6 +871,7 @@ CONFIG_PRINTER=m
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -964,6 +996,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -978,11 +1011,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1075,7 +1112,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1137,6 +1174,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f4379b1cf84..767600145fb 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:19 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
@@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -597,6 +621,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -853,6 +881,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -955,7 +987,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1016,6 +1049,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,11 +1161,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index b8669231c1f..52fafc006dd 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 43030fea2ee..8b4faae7a9a 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Mon Mar 16 09:03:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -123,10 +127,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +183,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -302,7 +312,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -581,6 +592,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -817,6 +832,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -919,7 +938,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1008,6 +1027,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1114,11 +1139,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index d5a864d7446..170360934ce 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:21 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index a25009174f3..f41cc2444d4 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:22 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
GitLab


From 08af66b137d9213dfc051a222144adceb41dee4b Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:26:51 -0500
Subject: [PATCH 1317/1421] powerpc/86xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/86xx/gef_ppc9a_defconfig |  92 ++++++--
 .../powerpc/configs/86xx/gef_sbc310_defconfig |  92 ++++++--
 .../powerpc/configs/86xx/gef_sbc610_defconfig | 122 +++++++---
 .../configs/86xx/mpc8610_hpcd_defconfig       | 100 ++++++---
 .../configs/86xx/mpc8641_hpcn_defconfig       | 211 +++++++-----------
 arch/powerpc/configs/86xx/sbc8641d_defconfig  | 114 +++++++---
 arch/powerpc/configs/mpc86xx_defconfig        | 211 +++++++-----------
 7 files changed, 556 insertions(+), 386 deletions(-)

diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index df2c1633779..b6a23af57f4 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Fri Mar 13 15:36:11 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:31 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -100,21 +103,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -123,10 +129,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y
 # CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +314,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -495,6 +508,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -885,6 +903,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -929,7 +950,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1122,7 +1143,6 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1178,6 +1198,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1192,11 +1213,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1552,6 +1581,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1697,11 +1732,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index bd236b3d915..a66910e6334 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Jan 28 23:05:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -96,20 +99,23 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,10 +124,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
 CONFIG_GEF_SBC310=y
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -298,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
@@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -674,6 +688,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -717,7 +735,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -894,7 +912,6 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -949,6 +966,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -963,11 +981,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1322,6 +1348,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1470,11 +1502,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1ab5abae00a..c6a7fc82b69 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:30 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,10 +74,20 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,21 +103,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +129,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -298,7 +315,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -490,6 +509,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -880,6 +909,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -923,7 +956,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 CONFIG_DS1682=y
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1174,6 +1204,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1188,11 +1219,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1548,6 +1587,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index bbdf4bfc432..cfd2efcc6bc 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8610=y
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -291,7 +308,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -774,7 +802,6 @@ CONFIG_ULI526X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
@@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1165,7 +1193,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1279,6 +1308,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 92acfdf3540..0bee3e30394 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,11 +72,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +129,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -297,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1449,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1604,11 +1549,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 04797e730c5..c30a0c71587 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:23 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:27 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,10 +73,20 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -90,21 +102,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,10 +128,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -296,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -488,6 +507,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -762,6 +788,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -805,7 +835,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1022,6 +1049,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1036,11 +1064,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1145,7 +1176,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1227,6 +1259,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index adc756e1f25..5bb1b8eb0b4 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,11 +73,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -116,10 +130,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 CONFIG_SBC8641D=y
 CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
 CONFIG_MPC8641=y
 CONFIG_MPC8610=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -299,7 +315,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -653,6 +679,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1480,6 +1419,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1635,11 +1580,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
GitLab


From 25991b90d7087c9ced2a31cacae4cb4655348a41 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:28:42 -0500
Subject: [PATCH 1318/1421] powerpc/embedded6xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/c2k_defconfig          | 128 ++++++++++++++------
 arch/powerpc/configs/ep8248e_defconfig      |  74 +++++++----
 arch/powerpc/configs/linkstation_defconfig  |  96 +++++++++++----
 arch/powerpc/configs/mgcoge_defconfig       |  74 ++++++++---
 arch/powerpc/configs/mpc7448_hpc2_defconfig |  91 ++++++++++----
 arch/powerpc/configs/mpc8272_ads_defconfig  |  77 ++++++++----
 arch/powerpc/configs/pq2fads_defconfig      |  90 ++++++++++----
 arch/powerpc/configs/prpmc2800_defconfig    | 120 +++++++++++++-----
 arch/powerpc/configs/storcenter_defconfig   |  71 ++++++++---
 9 files changed, 600 insertions(+), 221 deletions(-)

diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5103319a7f5..9ffa8de9280 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:51 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,12 +72,22 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,6 +134,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y
 # CONFIG_PPC_PRPMC2800 is not set
 CONFIG_PPC_C2K=y
 CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 CONFIG_BRIDGE_NF_EBTABLES=m
@@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
@@ -566,6 +582,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -924,6 +944,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=m
 CONFIG_GEN_RTC=m
 # CONFIG_GEN_RTC_X is not set
@@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 CONFIG_SENSORS_GL518SM=m
 # CONFIG_SENSORS_GL520SM is not set
 CONFIG_SENSORS_IT87=m
@@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 CONFIG_SENSORS_SMSC47M1=m
@@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
 # CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
@@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -1553,6 +1582,11 @@ CONFIG_QUOTACTL=y
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1637,6 +1671,7 @@ CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1719,12 +1755,15 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1788,18 +1833,21 @@ CONFIG_TRACING=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index add6419c15d..04915c3a43f 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -104,10 +114,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -167,6 +172,8 @@ CONFIG_8272=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,7 +283,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -550,6 +560,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -751,8 +766,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -780,6 +798,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 15900dcf0bf..a4053ab9e24 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar  6 00:07:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:54 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +70,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -124,10 +130,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -299,7 +311,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -805,6 +824,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 CONFIG_TULIP=y
@@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -843,8 +865,8 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,6 +1105,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1096,11 +1120,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1195,7 +1222,6 @@ CONFIG_HID=m
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1455,6 +1485,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index c58c38d5b7a..31e1df66515 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:30 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,10 +121,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -171,7 +179,9 @@ CONFIG_8272=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,7 +296,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -551,6 +564,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -750,6 +768,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -887,11 +910,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 38712e861c4..642ab67c843 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:33 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:56 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_PRPMC2800 is not set
 # CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 CONFIG_MPIC_WEIRD=y
@@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,7 +292,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -554,6 +575,7 @@ CONFIG_SATA_MV=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -587,6 +609,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -839,7 +865,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -901,6 +928,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index d85a43cb821..cb966ca2ce8 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:57 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,7 +286,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -554,6 +564,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -809,8 +823,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -841,6 +858,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -971,11 +993,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index fdded96633a..129d80860f2 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:42 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -106,10 +119,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -276,7 +290,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -606,6 +623,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
@@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -944,6 +969,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1074,11 +1104,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e971db17113..e9f287f313f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:03 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,9 +72,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,16 +130,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y
 CONFIG_PPC_PRPMC2800=y
 # CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -740,6 +764,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +807,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1012,6 +1038,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1026,11 +1053,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1347,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 94903465ea1..bd4a8d435c5 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar  6 00:09:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,16 +117,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,6 +183,8 @@ CONFIG_STORCENTER=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +296,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=m
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -500,6 +508,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -681,8 +695,8 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -696,7 +710,6 @@ CONFIG_R8169=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1112,6 +1127,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_EXPORTFS=m
 
@@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1246,11 +1268,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
-- 
GitLab


From 2e15eedffaae555085071c68cb94b9eeed2245be Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:29:08 -0500
Subject: [PATCH 1319/1421] powerpc/8xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/adder875_defconfig   | 65 +++++++++++++------
 arch/powerpc/configs/ep88xc_defconfig     | 63 +++++++++++++------
 arch/powerpc/configs/mgsuvd_defconfig     | 72 +++++++++++++++------
 arch/powerpc/configs/mpc866_ads_defconfig | 77 ++++++++++++++++-------
 arch/powerpc/configs/mpc885_ads_defconfig | 63 +++++++++++++------
 5 files changed, 241 insertions(+), 99 deletions(-)

diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index aaab5cc3751..74f7f7c6fdc 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:50 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -106,10 +116,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -698,6 +707,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -742,6 +756,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -753,7 +768,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index b2fdfd9e183..c2a439595f4 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -631,6 +640,7 @@ CONFIG_DAB=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -654,6 +664,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -698,6 +713,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -709,7 +725,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 297b5d5042b..24fa90792c5 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:32 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -103,10 +116,12 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -685,6 +699,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -739,6 +758,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -750,7 +770,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,11 +817,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -917,6 +950,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 1793d08e9c0..3add6f62b21 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -103,10 +113,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -622,7 +636,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -682,6 +697,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -725,6 +745,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -736,7 +757,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -782,11 +803,11 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -903,6 +935,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 4b76321c0ec..42e64ebc279 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:41 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -642,6 +651,7 @@ CONFIG_DAB=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -665,6 +675,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -709,6 +724,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -720,7 +736,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
GitLab


From 1b1cc7f21c51cc81992a547b59e174dd8c44d1bd Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Wed, 13 May 2009 20:44:07 +0200
Subject: [PATCH 1320/1421] ALSA: riptide: postfix increment and off by one

With a postfix increment these variables are incremented beyond
CMDIF_TIMEOUT / MAX_WRITE_RETRY.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/riptide/riptide.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 6f1034417a0..e51a5ef1954 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -889,7 +889,7 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
 	spin_lock_irqsave(&cif->lock, irqflags);
 	while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport))
 		udelay(10);
-	if (i >= CMDIF_TIMEOUT) {
+	if (i > CMDIF_TIMEOUT) {
 		err = -EBUSY;
 		goto errout;
 	}
@@ -907,8 +907,10 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
 			WRITE_PORT_ULONG(cmdport->data1, cmd);	/* write cmd */
 			if ((flags & RESP) && ret) {
 				while (!IS_DATF(cmdport) &&
-				       time++ < CMDIF_TIMEOUT)
+				       time < CMDIF_TIMEOUT) {
 					udelay(10);
+					time++;
+				}
 				if (time < CMDIF_TIMEOUT) {	/* read response */
 					ret->retlongs[0] =
 					    READ_PORT_ULONG(cmdport->data1);
@@ -1454,7 +1456,7 @@ static int snd_riptide_trigger(struct snd_pcm_substream *substream, int cmd)
 			SEND_GPOS(cif, 0, data->id, &rptr);
 			udelay(1);
 		} while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY);
-		if (j >= MAX_WRITE_RETRY)
+		if (j > MAX_WRITE_RETRY)
 			snd_printk(KERN_ERR "Riptide: Could not stop stream!");
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1783,7 +1785,7 @@ snd_riptide_codec_write(struct snd_ac97 *ac97, unsigned short reg,
 		SEND_SACR(cif, val, reg);
 		SEND_RACR(cif, reg, &rptr);
 	} while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY);
-	if (i == MAX_WRITE_RETRY)
+	if (i > MAX_WRITE_RETRY)
 		snd_printdd("Write AC97 reg failed\n");
 }
 
-- 
GitLab


From c34e6e8bdd99c746b7844c937c3a2529ef2c4437 Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 31 Mar 2009 12:59:24 +0200
Subject: [PATCH 1321/1421] MIPS: SMTC: Bring set/clear/change_c0_## return
 value semantics uptodate.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 526f327475c..1f798779378 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1484,14 +1484,15 @@ static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res |= set;						\
-	write_c0_##name(res);					\
+	new = res | set;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1502,14 +1503,15 @@ static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~clear;						\
-	write_c0_##name(res);					\
+	new = res & ~clear;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1517,9 +1519,10 @@ clear_c0_##name(unsigned int clear)				\
 }								\
 								\
 static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int new)		\
+change_c0_##name(unsigned int change, unsigned int newbits)	\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
@@ -1527,9 +1530,9 @@ change_c0_##name(unsigned int change, unsigned int new)		\
 								\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~change;						\
-	res |= (new & change);					\
-	write_c0_##name(res);					\
+	new = res & ~change;					\
+	new |= (newbits & change);				\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
-- 
GitLab


From bcf11801e77946533767bbb368130220e241d824 Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 31 Mar 2009 13:10:32 +0200
Subject: [PATCH 1322/1421] MIPS: SMTC: Fix xxx_clockevent_init() naming
 conflict for SMTC

Commit 779e7d41ad004946603da139da99ba775f74cb1c created a name collision
in SMTC builds.  The attached patch corrects this in a a
not-too-terribly-ugly manner.  Note that the SMTC case has to come
first, because CEVT_R4K will also be true.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/time.h | 6 +++++-
 arch/mips/kernel/cevt-smtc.c | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 38a30d2ee95..e46f23f54a5 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void);
 
 static inline int mips_clockevent_init(void)
 {
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern int smtc_clockevent_init(void);
+
+	return smtc_clockevent_init();
+#elif CONFIG_CEVT_R4K
 	return r4k_clockevent_init();
 #else
 	return -ENXIO;
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
index 6d45e24db5b..df6f5bc6057 100644
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 }
 
 
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();
-- 
GitLab


From b7863ee144a99ff54fee90d851e24d73f38af661 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Tue, 31 Mar 2009 18:51:27 +0200
Subject: [PATCH 1323/1421] MIPS: Alchemy: Fix AU1100 interrupt numbers
 off-by-one

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/au1000.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 62f91f50b5b..87a16598ebc 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -715,7 +715,7 @@ enum soc_au1500_ints {
 #ifdef CONFIG_SOC_AU1100
 enum soc_au1100_ints {
 	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
 	AU1100_UART1_INT,
 	AU1100_SD_INT,
 	AU1100_UART3_INT,
-- 
GitLab


From d16797b304a4701a7d156f47773c6d2e456b64ee Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Tue, 31 Mar 2009 18:51:28 +0200
Subject: [PATCH 1324/1421] MIPS: Alchemy: Add missing Au1200 GPIO203 interrupt

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/au1000.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 87a16598ebc..854e95f1b07 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -902,8 +902,8 @@ enum soc_au1200_ints {
 	AU1000_RTC_MATCH0_INT,
 	AU1000_RTC_MATCH1_INT,
 	AU1000_RTC_MATCH2_INT,
-
-	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_203,
+	AU1200_NAND_INT,
 	AU1200_GPIO_204,
 	AU1200_GPIO_205,
 	AU1200_GPIO_206,
-- 
GitLab


From 1d9c114dc1702306215439cd608047ab639700db Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Tue, 31 Mar 2009 18:44:36 +0200
Subject: [PATCH 1325/1421] MIPS: au1xxx-ide: Fix build with CONFIG_PM

au1xxx_power_dev_t? is never defined;  get rid of all PM stuff as well
since it is not in the driver source anyway.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 60638b8969b..5656c72de6d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -46,20 +46,6 @@
 #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
 #endif
 
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
-	spinlock_t		lock;	/* Used to block on state transitions */
-	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
-	unsigned		stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
 typedef struct {
 	u32			tx_dev_id, rx_dev_id, target_dev_id;
 	u32			tx_chan, rx_chan;
@@ -72,9 +58,6 @@ typedef struct {
 #endif
 	int			irq;
 	u32			regbase;
-#ifdef CONFIG_PM
-	pm_state		pm;
-#endif
 } _auide_hwif;
 
 /******************************************************************************/
-- 
GitLab


From 1291417eb61d1cd3fc69e295c2e9b83c5f6a8ff9 Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:23 +0300
Subject: [PATCH 1326/1421] MIPS: IP32: Two symbols can become static

The file arch/mips/mm/sc-rm7k.c needlessly defines two global symbols:

rm7k_sc_ops
rm7k_tcache_enabled

This patch makes these symbols static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/sc-rm7k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index e3abfb2d7e8..de69bfbf506 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size;
 
 #include <asm/r4kcache.h>
 
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
 
 /*
  * Writeback and invalidate the primary cache dcache before DMA.
@@ -121,7 +121,7 @@ static void rm7k_sc_disable(void)
 	clear_c0_config(RM7K_CONF_SE);
 }
 
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
 	.bc_enable = rm7k_sc_enable,
 	.bc_disable = rm7k_sc_disable,
 	.bc_wback_inv = rm7k_sc_wback_inv,
-- 
GitLab


From 36a09d7848abf017ea11ea949372f46edc1350da Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:24 +0300
Subject: [PATCH 1327/1421] MIPS: IP32: ip32_be_handler symbol is needlessly
 defined global

The file arch/mips/sgi-ip32/ip32-berr.c needlessly defines the function
ip32_be_handler() as global, and this patch makes it static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip32/ip32-berr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c
index a278e918a01..afc1cadbba3 100644
--- a/arch/mips/sgi-ip32/ip32-berr.c
+++ b/arch/mips/sgi-ip32/ip32-berr.c
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;
 
-- 
GitLab


From ae5373874a393d36d0fbc1a21c1b81e52736a4f2 Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:25 +0300
Subject: [PATCH 1328/1421] MIPS: IP32: Fix needlessly global symbols in
 arch/mips/sgi-ip32/ip32-irq.c

The following symbols are needlessly defined global: cpuerr_irq and
memerr_irq. This patch makes the symbols static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip32/ip32-irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 83a0b3c359d..5c2bf111ca6 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -112,13 +112,13 @@ static void inline flush_mace_bus(void)
 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
 
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
 	.handler = crime_memerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME memory error",
 };
 
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
 	.handler = crime_cpuerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME CPU error",
-- 
GitLab


From b6d57ae97af3c38d28f066b5e47b7d58e468728a Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:26 +0300
Subject: [PATCH 1329/1421] MIPS: gbe: Make needlessly global symbols static in
 drivers/video/gbefb.c

The following symbols are needlessly defined global:

default_mode
default_var
gbe_mem_phys
gbe_turn_off
gbefb_exit
gbefb_init
gbefb_setup

This error was noticed by namespacecheck when compiling ip32_defconfig.

This patch makes the symbols static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/video/gbefb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index fe5b519860b..1a83709f961 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -75,7 +75,7 @@ struct gbefb_par {
 static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
 static void *gbe_mem;
 static dma_addr_t gbe_dma_addr;
-unsigned long gbe_mem_phys;
+static unsigned long gbe_mem_phys;
 
 static struct {
 	uint16_t *cpu;
@@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
 
 static int flat_panel_enabled = 0;
 
@@ -205,7 +205,7 @@ static void gbe_reset(void)
  *              console.
  */
 
-void gbe_turn_off(void)
+static void gbe_turn_off(void)
 {
 	int i;
 	unsigned int val, x, y, vpixen_off;
@@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev)
  * Initialization
  */
 
-int __init gbefb_setup(char *options)
+static int __init gbefb_setup(char *options)
 {
 	char *this_opt;
 
@@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = {
 
 static struct platform_device *gbefb_device;
 
-int __init gbefb_init(void)
+static int __init gbefb_init(void)
 {
 	int ret = platform_driver_register(&gbefb_driver);
 	if (!ret) {
@@ -1301,7 +1301,7 @@ int __init gbefb_init(void)
 	return ret;
 }
 
-void __exit gbefb_exit(void)
+static void __exit gbefb_exit(void)
 {
 	platform_device_unregister(gbefb_device);
 	platform_driver_unregister(&gbefb_driver);
-- 
GitLab


From 7fc7316aa82fb3874f69689bd36134afea9c8bfd Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 1 Apr 2009 16:11:53 +0200
Subject: [PATCH 1330/1421] MIPS: Print the actual detected I-cache
 associativity on bootup.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/c-r4k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 58d9075e86f..171951d2305 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void)
 
 	printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
 	       icache_size >> 10,
-	       cpu_has_vtag_icache ? "VIVT" : "VIPT",
+	       c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
 	       way_string[c->icache.ways], c->icache.linesz);
 
 	printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
-- 
GitLab


From a575b8453944c5911a2a6f51d0096fffba82dd48 Mon Sep 17 00:00:00 2001
From: Zhang Le <r0bertz@gentoo.org>
Date: Thu, 2 Apr 2009 15:41:45 +0800
Subject: [PATCH 1331/1421] MIPS: Add Loongson cpu-feature-overrides.h

I have taken Wu Zhangjin's and Philippe Vachon's version as references,
did a little modification and tested on 16K page size kernel. It works
well.

Unfornately although it already has defined cpu_has_dc_aliases as 1, 4k
page size still not working.  More work needed here.

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 .../asm/mach-lemote/cpu-feature-overrides.h   | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h

diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
new file mode 100644
index 00000000000..550a10dc9db
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
-- 
GitLab


From 592e527f5b7c17e9be8fc58a63c3f918827b4b92 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 6 Apr 2009 00:31:22 +0200
Subject: [PATCH 1332/1421] MIPS: Fix build error if CONFIG_CEVT_R4K is
 undefined.

Introduced by 99aa5029937ee926e3b249369e208d7013cd381b.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/time.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index e46f23f54a5..df6a430de5e 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -61,7 +61,7 @@ static inline int mips_clockevent_init(void)
 	extern int smtc_clockevent_init(void);
 
 	return smtc_clockevent_init();
-#elif CONFIG_CEVT_R4K
+#elif defined(CONFIG_CEVT_R4K)
 	return r4k_clockevent_init();
 #else
 	return -ENXIO;
-- 
GitLab


From c7d16736b8759f45a49d318bf3a8ca7fed7b6962 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 16 Apr 2009 09:20:17 -0700
Subject: [PATCH 1333/1421] MIPS: Compat: Use generic 32-bit wrapers for
 sys_timerfd_{g,s}ettime

The LTP timerfd01 test is failing (blocking forever) on the 32-bit ABIs. We
need to use the compat_* wrappers for these system calls.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/scall64-n32.S | 4 ++--
 arch/mips/kernel/scall64-o32.S | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index c2c16ef9218..93cc672f452 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -405,8 +405,8 @@ EXPORT(sysn32_call_table)
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime		/* 5285 */
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime	/* 5285 */
+	PTR	compat_sys_timerfd_settime
 	PTR	sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 002fac27021..a5598b2339d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -525,8 +525,8 @@ sys_call_table:
 	PTR	sys_eventfd
 	PTR	sys32_fallocate			/* 4320 */
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime
+	PTR	compat_sys_timerfd_settime
 	PTR	compat_sys_signalfd4
 	PTR	sys_eventfd2			/* 4325 */
 	PTR	sys_epoll_create1
-- 
GitLab


From dfe99b9c4ef62fa6ea20fa06b6f5c9819039c52d Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 16 Apr 2009 02:22:21 +0900
Subject: [PATCH 1334/1421] MIPS: RBTX4939: Fix typo in system name

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/rbtx4939/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 011e1e332f4..4199c6fd4d1 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void)
 }
 
 struct txx9_board_vec rbtx4939_vec __initdata = {
-	.system = "Tothiba RBTX4939",
+	.system = "Toshiba RBTX4939",
 	.prom_init = rbtx4939_prom_init,
 	.mem_setup = rbtx4939_setup,
 	.irq_setup = rbtx4939_irq_setup,
-- 
GitLab


From 6cec2a0ac57d2ebef495a46d7866ae86e8d0e508 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 11 Apr 2009 23:31:50 +0900
Subject: [PATCH 1335/1421] MIPS: Do not include seccomp.h from compat.h

The compat.h does not need seccomp.h since TIF_32BIT was moved to
thread_info.h

This fixes a build error of 64-bit kernel without CONFIG_SECCOMP.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: : David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/compat.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 6c5b40905dd..f58aed354bf 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,7 +3,6 @@
 /*
  * Architecture specific compatibility types
  */
-#include <linux/seccomp.h>
 #include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>
-- 
GitLab


From 5d57c31e5790d44905af0459a21086dbad167d26 Mon Sep 17 00:00:00 2001
From: Zhang Le <r0bertz@gentoo.org>
Date: Wed, 15 Apr 2009 17:01:52 +0800
Subject: [PATCH 1336/1421] MIPS: Loongson 2 needs no hazard barriers.

Quoting from Loongson2FUserGuide.pdf:

5.22.1 Hazards
The processor detects most of the pipeline hazards in hardware, including
CP0 hazards and load hazards. No NOP instructions are required to correct
instruction sequences.

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/hazards.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a12d971db4f..0eaf77ffbc4 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,8 +138,9 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-      defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-- 
GitLab


From 47740eb887796608fb4c629aa6b8507a2fb6c0eb Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 19 Apr 2009 03:21:22 +0200
Subject: [PATCH 1337/1421] MIPS: Enable CLO / CLZ instructions via separate
 CPU property

This is useful for IDT RC32332, RC32334 and NEC VR5500 processors which do
not implement the full MIPS32 / MIPS64 architecture.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/bitops.h       | 4 ++--
 arch/mips/include/asm/cpu-features.h | 9 +++++++++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index bac4a960b24..b1e9e97a9c7 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
 	int num;
 
 	if (BITS_PER_LONG == 32 &&
-	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
 {
 	int r;
 
-	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
 		return 32 - x;
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index a0d14f85b78..c0047f86133 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -147,6 +147,15 @@
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz	cpu_has_mips_r
+# endif
+
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif
-- 
GitLab


From 4f29c057aa81c5440f06b716f768ba9f8a041fe9 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 23 Jan 2009 00:42:11 +0900
Subject: [PATCH 1338/1421] MIPS: Synchronize dma_map_page and dma_map_single

Synchronize dma_map_page/dma_unmap_page and dma_map_single/dma_unmap_single.
This will reduce unnecessary writebacks and invalidates.

[Ralf: make dma_unmap_page an inline function.]

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/dma-mapping.h |  9 +++++++--
 arch/mips/mm/dma-default.c          | 19 +------------------
 2 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index c64afb40cd0..d16afddb09a 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	enum dma_data_direction direction);
 extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int nhwentries, enum dma_data_direction direction);
 extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index bed56f1ac83..4fdb7f5216b 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long addr;
 
 		addr = (unsigned long) page_address(page) + offset;
-		dma_cache_wback_inv(addr, size);
+		__dma_sync(addr, size, direction);
 	}
 
 	return plat_map_dma_mem_page(dev, page) + offset;
@@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
-		unsigned long addr;
-
-		addr = dma_addr_to_virt(dma_address);
-		dma_cache_wback_inv(addr, size);
-	}
-
-	plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	enum dma_data_direction direction)
 {
-- 
GitLab


From 740ebe4a54fae1705705ec87ce511b16ffb50659 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 3 Apr 2009 01:01:21 +0900
Subject: [PATCH 1339/1421] MIPS: TXx9: Fix possible overflow in clock
 calculations

Addition of -fwrapv option in 2.6.29 discloses possible overflow with
signed arithmetics.  For example, result of "a * 6 / 12" (int a =
400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv.

Change some variable to unsigned to avoid such overflows.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/setup_tx4927.c | 2 +-
 arch/mips/txx9/generic/setup_tx4938.c | 2 +-
 arch/mips/txx9/generic/setup_tx4939.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 914e93c6263..1093549df1a 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -88,7 +88,7 @@ void __init tx4927_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index f0844f891f0..3925219b897 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -93,7 +93,7 @@ void __init tx4938_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 7a25b573e9b..c2bf150c883 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -114,7 +114,7 @@ void __init tx4939_setup(void)
 	int i;
 	__u32 divmode;
 	__u64 pcfg;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 
 	txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
 			  TX4939_REG_SIZE);
-- 
GitLab


From c52399bece85cd4b157dd772e9f20551f9f18d2f Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 2 Apr 2009 14:07:10 +0200
Subject: [PATCH 1340/1421] MIPS: Cavium: Add support for 8k and 32k page
 sizes.

Beyond the requirements of the architecture standard Cavium also supports
8k and 32k pages.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>
---
 arch/mips/Kconfig                   | 16 ++++++++++++----
 arch/mips/include/asm/mipsregs.h    | 11 +++++++++++
 arch/mips/include/asm/page.h        |  3 +++
 arch/mips/include/asm/pgtable-64.h  |  6 ++++++
 arch/mips/include/asm/thread_info.h |  3 +++
 arch/mips/lib/dump_tlb.c            |  9 +++++++++
 6 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 998e5db8cc0..023aa2d4650 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on EXPERIMENTAL && CPU_R8000
+	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
-	  only on the R8000 processor.  Not that at the time of this writing
-	  this option is still high experimental; there are also issues with
-	  compatibility of user applications.
+	  only on R8000 and cnMIPS processors.  Note that you will need a
+	  suitable Linux distribution to support this.
 
 config PAGE_SIZE_16KB
 	bool "16kB"
@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
 	  all non-R3000 family processors.  Note that you will need a suitable
 	  Linux distribution to support this.
 
+config PAGE_SIZE_32KB
+	bool "32kB"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Using 32kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on cnMIPS cores.  Note that you will need a suitable Linux
+	  distribution to support this.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
 	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 1f798779378..0ef30c81fea 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -184,12 +184,19 @@
 #else
 
 #define PM_4K		0x00000000
+#define PM_8K		0x00002000
 #define PM_16K		0x00006000
+#define PM_32K		0x0000e000
 #define PM_64K		0x0001e000
+#define PM_128K		0x0003e000
 #define PM_256K		0x0007e000
+#define PM_512K		0x000fe000
 #define PM_1M		0x001fe000
+#define PM_2M		0x003fe000
 #define PM_4M		0x007fe000
+#define PM_8M		0x00ffe000
 #define PM_16M		0x01ffe000
+#define PM_32M		0x03ffe000
 #define PM_64M		0x07ffe000
 #define PM_256M		0x1fffe000
 #define PM_1G		0x7fffe000
@@ -201,8 +208,12 @@
  */
 #ifdef CONFIG_PAGE_SIZE_4KB
 #define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK	PM_8K
 #elif defined(CONFIG_PAGE_SIZE_16KB)
 #define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK	PM_32K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
 #define PM_DEFAULT_MASK	PM_64K
 #else
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index fe7a88ea066..9f946e4ca05 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -23,6 +23,9 @@
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define PAGE_SHIFT	14
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT	15
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 943515f0ef8..4ed9d1bba2b 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -83,6 +83,12 @@
 #define PMD_ORDER		0
 #define PTE_ORDER		0
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PGD_ORDER		0
 #define PUD_ORDER		aieeee_attempt_to_allocate_pud
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 676aa2ae191..143a48136a4 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define THREAD_SIZE_ORDER (0)
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define THREAD_SIZE_ORDER (0)
 #endif
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 779821cd54a..3f69725556a 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask)
 	case PM_16K:	return "16kb";
 	case PM_64K:	return "64kb";
 	case PM_256K:	return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case PM_8K:	return "8kb";
+	case PM_32K:	return "32kb";
+	case PM_128K:	return "128kb";
+	case PM_512K:	return "512kb";
+	case PM_2M:	return "2Mb";
+	case PM_8M:	return "8Mb";
+	case PM_32M:	return "32Mb";
+#endif
 #ifndef CONFIG_CPU_VR41XX
 	case PM_1M:	return "1Mb";
 	case PM_4M:	return "4Mb";
-- 
GitLab


From 237e5a3443e5531336b880bbaf3e7bac110330f7 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 20 Apr 2009 13:43:05 +0200
Subject: [PATCH 1341/1421] MIPS: Kconfig: Delete duplicate definition of
 RWSEM_GENERIC_SPINLOCK.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 023aa2d4650..09b1287a92c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1966,10 +1966,6 @@ config SECCOMP
 
 endmenu
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
-- 
GitLab


From ad058e95f943e26205aa916b83b85ccb21bd4812 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Wed, 22 Apr 2009 08:01:48 +0200
Subject: [PATCH 1342/1421] MIPS: Alchemy: Timer build fix

Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index f58d4ffb894..33fbae79af5 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -44,7 +44,7 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
 }
-- 
GitLab


From 1699e5c9c414f0e3b393eb87c4acfc319fe7a1c4 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Tue, 21 Apr 2009 23:31:12 +0200
Subject: [PATCH 1343/1421] MIPS: IP27: Fix clash with NMI_OFFSET from
 hardirq.h

There was already a define for NMI_OFFSET in asm/sn/addr.h, which now
clashes with linux/hardirq.h. Rename the one in sn/addr.h to fix IP27
builds..

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/sn/addrs.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index fec9bdd3491..3a56d90abfa 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -359,11 +359,11 @@
 	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
 #define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
 
-#define NMI_OFFSET(nasid, slice)					\
+#define SN_NMI_OFFSET(nasid, slice)					\
 	(KLD_NMI(nasid)->offset +					\
 	 KLD_NMI(nasid)->stride * (slice))
 #define NMI_ADDR(nasid, slice)						\
-	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+	TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
 #define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
 
 #define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
-- 
GitLab


From d0aab922b19aaaef13c946236cc71ab9b7f895ee Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 27 Apr 2009 15:31:34 +0200
Subject: [PATCH 1344/1421] MIPS: Make access_ok() sideeffect proof.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/uaccess.h | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 09ff5bb1744..42b9cec2ee9 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -104,11 +104,21 @@
 
 #define __access_mask get_fs().seg
 
-#define __access_ok(addr, size, mask)					\
-	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+#define __access_ok(addr, size, mask)							\
+({											\
+	const volatile void __user *__up = addr;					\
+	unsigned long __addr = (unsigned long) __up;					\
+	unsigned long __size = size;							\
+	unsigned long __mask = mask;							\
+	unsigned long __ok;								\
+											\
+	__ok = (signed long)(__mask & (__addr | (__addr + __size) |			\
+		__ua_size(__size)));							\
+	__ok == 0;									\
+})
 
 #define access_ok(type, addr, size)					\
-	likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+	likely(__access_ok((addr), (size), __access_mask))
 
 /*
  * put_user: - Write a simple value into user space.
-- 
GitLab


From ed01b3d240b76dc1b93d08833832f9ce51a11f02 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 27 Apr 2009 16:46:21 +0200
Subject: [PATCH 1345/1421] MIPS: Make uaccess.h slightly more sparse friendly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/uaccess.h | 39 +++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 42b9cec2ee9..5c0876073f1 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -104,17 +104,17 @@
 
 #define __access_mask get_fs().seg
 
-#define __access_ok(addr, size, mask)							\
-({											\
-	const volatile void __user *__up = addr;					\
-	unsigned long __addr = (unsigned long) __up;					\
-	unsigned long __size = size;							\
-	unsigned long __mask = mask;							\
-	unsigned long __ok;								\
-											\
-	__ok = (signed long)(__mask & (__addr | (__addr + __size) |			\
-		__ua_size(__size)));							\
-	__ok == 0;									\
+#define __access_ok(addr, size, mask)					\
+({									\
+	unsigned long __addr = (unsigned long) (addr);			\
+	unsigned long __size = size;					\
+	unsigned long __mask = mask;					\
+	unsigned long __ok;						\
+									\
+	__chk_user_ptr(addr);						\
+	__ok = (signed long)(__mask & (__addr | (__addr + __size) |	\
+		__ua_size(__size)));					\
+	__ok == 0;							\
 })
 
 #define access_ok(type, addr, size)					\
@@ -235,6 +235,7 @@ do {									\
 ({									\
 	int __gu_err;							\
 									\
+	__chk_user_ptr(ptr);						\
 	__get_user_common((x), size, ptr);				\
 	__gu_err;							\
 })
@@ -315,6 +316,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val;					\
 	int __pu_err = 0;						\
 									\
+	__chk_user_ptr(ptr);						\
 	__pu_val = (x);							\
 	switch (size) {							\
 	case 1: __put_user_asm("sb", ptr); break;			\
@@ -882,7 +884,20 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_len;							\
 })
 
-#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
 
 #define copy_in_user(to, from, n)					\
 ({									\
-- 
GitLab


From 01caec8396eff7d519e6d85c5a1c860e7d4714e5 Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Mon, 27 Apr 2009 23:50:21 -0600
Subject: [PATCH 1346/1421] MIPS: MSP71xx: Resolve multiple definition of
 plat_timer_setup

There have been a number of compile problems with the msp71xx configuration
ever since it was included in the linux-mips.org repository.  This patch
resolves the "multiple definition of plat_timer_setup" problem, and creates
the required get_c0_compare_int function.

This patch has been compile-tested against the current HEAD.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/msp71xx/msp_time.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c
index 7cfeda5a651..cca64e15f57 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_time.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c
@@ -81,10 +81,7 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = cpu_rate/2;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
 {
-#ifdef CONFIG_IRQ_MSP_CIC
-	/* we are using the vpe0 counter for timer interrupts */
-	setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+	return MSP_INT_VPE0_TIMER;
 }
-- 
GitLab


From 005076a16bd4c5ea60905ff475e8af57d60578f1 Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Mon, 27 Apr 2009 23:52:25 -0600
Subject: [PATCH 1347/1421] MIPS: MSP71xx: Resolve use of non-existent GPIO
 routines in msp71xx reset

There have been a number of compile problems with the msp71xx configuration
ever since it was included in the linux-mips.org repository.  This patch
resolves compilation problems with attempting to reset the board using
non-existent GPIO routines.

This patch has been compile-tested against the current HEAD.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/msp71xx/msp_setup.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index c93675615f5..a54e85b3cf2 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -21,7 +21,6 @@
 
 #if defined(CONFIG_PMC_MSP7120_GW)
 #include <msp_regops.h>
-#include <msp_gpio.h>
 #define MSP_BOARD_RESET_GPIO	9
 #endif
 
@@ -88,11 +87,8 @@ void msp7120_reset(void)
 	 * as GPIO char driver may not be enabled and it would look up
 	 * data inRAM!
 	 */
-	set_value_reg32(GPIO_CFG3_REG,
-			basic_mode_mask(MSP_BOARD_RESET_GPIO),
-			basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
-	set_reg32(GPIO_DATA3_REG,
-			basic_data_mask(MSP_BOARD_RESET_GPIO));
+	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+	set_reg32(GPIO_DATA3_REG, 8);
 
 	/*
 	 * In case GPIO9 doesn't reset the board (jumper configurable!)
-- 
GitLab


From ef41f4600f05a4e973c3ac72869c18269567b319 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 14:17:54 +0200
Subject: [PATCH 1348/1421] MIPS: uaccess: Switch lock annotations to
 might_fault().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/checksum.h |  4 ++--
 arch/mips/include/asm/uaccess.h  | 37 ++++++++++++++++++--------------
 2 files changed, 23 insertions(+), 18 deletions(-)

diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index 290485ac540..f2f7c6c264d 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -40,7 +40,7 @@ static inline
 __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	return __csum_partial_copy_user((__force void *)src, dst,
 					len, sum, err_ptr);
 }
@@ -53,7 +53,7 @@ static inline
 __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, dst, len))
 		return __csum_partial_copy_user(src, (__force void *)dst,
 						len, sum, err_ptr);
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 5c0876073f1..8de858f5449 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -245,6 +245,7 @@ do {									\
 	int __gu_err = -EFAULT;						\
 	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
 		__get_user_common((x), size, __gu_ptr);			\
 									\
@@ -334,6 +335,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	int __pu_err = -EFAULT;						\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
 		switch (size) {						\
 		case 1: __put_user_asm("sb", __pu_addr); break;		\
@@ -708,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
 	__cu_len;							\
 })
@@ -764,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
 		                                 __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -843,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
 	                                   __cu_len);			\
 	__cu_len;							\
@@ -874,13 +877,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -890,10 +894,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
 	                                   __cu_len);			\
 	__cu_len;							\
@@ -905,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
-	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -932,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, $0\n\t"
@@ -981,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1018,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1037,7 +1042,7 @@ static inline long __strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_nocheck_asm)
@@ -1067,7 +1072,7 @@ static inline long strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_asm)
@@ -1084,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1115,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
-- 
GitLab


From 165533c3bd750042e7e140dff5bc2406a5104efe Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 17:31:50 +0200
Subject: [PATCH 1349/1421] MIPS: IP27: Get rid of #ident.  Gcc 4.4.0 doesn't
 like it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/sn/nmi.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
index 6b7b0b5f372..1af49897d4e 100644
--- a/arch/mips/include/asm/sn/nmi.h
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -3,13 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
  * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
  */
 #ifndef __ASM_SN_NMI_H
 #define __ASM_SN_NMI_H
 
-#ident "$Revision: 1.5 $"
-
 #include <asm/sn/addrs.h>
 
 /*
-- 
GitLab


From 05e41404470662a17699af9e6d91fc80ed91e757 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 19:38:35 +0200
Subject: [PATCH 1350/1421] MIPS: Set compiler options only after the compiler
 prefix has ben set.

Otherwise indigestable options might be passed to the host compiler.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 8d544c7c9fe..3d5626ee0a5 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,8 +14,6 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y := -ffunction-sections
-
 #
 # Select the object file format to substitute into the linker script.
 #
@@ -50,6 +48,8 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+cflags-y := -ffunction-sections
+
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
 vmlinux-32		= vmlinux
-- 
GitLab


From 1a4ba061b3c93804027b4cc4c588cfad748d9fc2 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 19:28:33 +0200
Subject: [PATCH 1351/1421] MIPS: Use -mno-check-zero-division

I don't think that in 15 years of Linux/MIPS the zero division checking
code generated by gcc by default has ever caught anything.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3d5626ee0a5..26947ab8526 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -49,6 +49,7 @@ ifneq ($(SUBARCH),$(ARCH))
 endif
 
 cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
 
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
-- 
GitLab


From 5c5dd1d29120affb127955277bfba9f60e27a3fe Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Tue, 28 Apr 2009 17:00:27 -0600
Subject: [PATCH 1352/1421] MIPS: MSP71xx: Remove the RAMROOT functions

The RAMROOT function was a successful but non-portable attempt to append
the root filesystem to the end of the kernel image.  The preferred and
portable solution is to use an initramfs instead.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/Kconfig            | 12 -----
 arch/mips/pmc-sierra/msp71xx/msp_prom.c | 60 +------------------------
 2 files changed, 1 insertion(+), 71 deletions(-)

diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index 90261b83db0..c139988bb85 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA
 
 endchoice
 
-menu "Options for PMC-Sierra MSP chipsets"
-	depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
-	bool "Root filesystem embedded in kernel image"
-	select MTD
-	select MTD_BLOCK
-	select MTD_PMC_MSP_RAMROOT
-	select MTD_RAM
-
-endmenu
-
 config HYPERTRANSPORT
 	bool "Hypertransport Support for PMC-Sierra Yosemite"
 	depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
index e5bd5481d8d..c317a3623ce 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
@@ -40,12 +40,6 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	char		*str;
 	unsigned int	memsize;
 	unsigned int	heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	void		*ramroot_start;
-	unsigned long	ramroot_size;
-#endif
 	int i;
 
 	str = prom_getenv(memsz_env);
@@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	i++;			/* 3 */
 	mdesc[i].type = BOOT_MEM_RESERVED;
 	mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	if (get_ramroot(&ramroot_start, &ramroot_size)) {
-		/*
-		 * Rootfs in RAM -- follows kernel
-		 * Combine rootfs image with kernel block so a
-		 * page (4k) isn't wasted between memory blocks
-		 */
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)ramroot_start + ramroot_size)) - mdesc[i].base;
-	} else
-#endif
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)_end)) - mdesc[i].base;
+	mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
 
 	/* Remainder of RAM -- under memsize */
 	i++;			/* 5 */
@@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 
 	return &mdesc[0];
 }
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
-	extern char _end[];
-
-	/* Check for start following the end of the kernel */
-	void *check_start = (void *)_end;
-
-	/* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
-	if (*(__u32 *)check_start == CRAMFS_MAGIC) {
-		/* Get CRAMFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct cramfs_super *)
-				   check_start)->size);
-
-		return true;
-	}
-#endif
-#ifdef CONFIG_SQUASHFS
-	if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
-		/* Get SQUASHFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct squashfs_super_block *)
-				   check_start)->bytes_used);
-
-		return true;
-	}
-#endif
-
-	return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif
-- 
GitLab


From 0b54352600b820a6d25f151cbd8975ed9b2aeb09 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 30 Apr 2009 02:16:19 +0200
Subject: [PATCH 1353/1421] MIPS: Fix sign-extension bug in 32-bit kernel on
 32-bit hardware.

Probably nobody does arithmetic on cp0 register values so this has never
bitten.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 0ef30c81fea..32ef8bec5c8 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -728,8 +728,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source "\n\t"			\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	else								\
@@ -737,8 +737,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	local_irq_restore(__flags);					\
-- 
GitLab


From bb86bf28aec6d0a207ae09f38a43e94133d4d6db Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 25 Apr 2009 11:25:34 +0200
Subject: [PATCH 1354/1421] MIPS: Fix highmem.

Commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) rsp.
b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (linux-mips.org):

> From: Chris Dearman <chris@mips.com>
> Date: Wed, 19 Sep 2007 00:58:24 +0100
> Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time.
>
> Slightly tacky, but there is a precedent in the sparc archirecture code.

introduces the variable _page_cachable_default, which defaults to zero and.
is used to create the prototype PTE for __kmap_atomic in
arch/mips/mm/init.c:kmap_init before initialization in
arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be
used as the CCA of kmap atomic pages which on many processors is not a
defined CCA value and may result in writes to kmap_atomic pages getting
corrupted.  Debugged by Jon Fraser (jfraser@broadcom.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/fixmap.h  |  3 +++
 arch/mips/include/asm/highmem.h |  6 ++++--
 arch/mips/mm/highmem.c          | 25 +++++++++++++++++++------
 arch/mips/mm/init.c             | 26 --------------------------
 4 files changed, 26 insertions(+), 34 deletions(-)

diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 9cc8522a394..0f5caa1307f 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	return __virt_to_fix(vaddr);
 }
 
+#define kmap_get_fixmap_pte(vaddr)					\
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
 /*
  * Called from pgtable_init()
  */
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 4374ab2adc7..25adfb02923 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -30,8 +30,6 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 4481656d106..2b1309b2580 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,7 +1,12 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
 void *__kmap(struct page *page)
 {
 	void *addr;
@@ -14,6 +19,7 @@ void *__kmap(struct page *page)
 
 	return addr;
 }
+EXPORT_SYMBOL(__kmap);
 
 void __kunmap(struct page *page)
 {
@@ -22,6 +28,7 @@ void __kunmap(struct page *page)
 		return;
 	kunmap_high(page);
 }
+EXPORT_SYMBOL(__kunmap);
 
 /*
  * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
@@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
 	local_flush_tlb_one((unsigned long)vaddr);
 
 	return (void*) vaddr;
 }
+EXPORT_SYMBOL(__kmap_atomic);
 
 void __kunmap_atomic(void *kvaddr, enum km_type type)
 {
@@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
+EXPORT_SYMBOL(__kunmap_atomic);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
@@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 	debug_kmap_atomic(type);
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
 	flush_tlb_one(vaddr);
 
 	return (void*) vaddr;
@@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+	unsigned long kmap_vstart;
+
+	/* cache the first kmap pte */
+	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index d9348946a19..c5511294a9e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void)
 	return 1UL << order;
 }
 
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
 #ifdef CONFIG_MIPS_MT_SMTC
 static pte_t *kmap_coherent_pte;
 static void __init kmap_coherent_init(void)
@@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma,
 	}
 }
 
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
-	unsigned long kmap_vstart;
-
-	/* cache the first kmap pte */
-	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
-	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
-	kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {
-- 
GitLab


From c21004cd5b4cb7d479514d470a62366e8307412c Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 30 Apr 2009 18:14:56 +0200
Subject: [PATCH 1355/1421] MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.

The inline assembler used on 32-bit kernels was using the "h" constraint
which was considered dangerous and removed for gcc 4.4.0.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/div64.h | 142 ++++++++++++----------------------
 1 file changed, 50 insertions(+), 92 deletions(-)

diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
index d1d699105c1..dc5ea573644 100644
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -6,105 +6,63 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
 
-#include <linux/types.h>
+#include <asm-generic/div64.h>
 
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
 
-#include <asm/compiler.h>
+#include <linux/types.h>
 
 /*
  * No traps on overflows for any of these...
  */
 
-#define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot32, __mod32; \
-	unsigned long __cf, __tmp, __tmp2, __i; \
-	\
-	__asm__(".set	push\n\t" \
-		".set	noat\n\t" \
-		".set	noreorder\n\t" \
-		"move	%2, $0\n\t" \
-		"move	%3, $0\n\t" \
-		"b	1f\n\t" \
-		" li	%4, 0x21\n" \
-		"0:\n\t" \
-		"sll	$1, %0, 0x1\n\t" \
-		"srl	%3, %0, 0x1f\n\t" \
-		"or	%0, $1, %5\n\t" \
-		"sll	%1, %1, 0x1\n\t" \
-		"sll	%2, %2, 0x1\n" \
-		"1:\n\t" \
-		"bnez	%3, 2f\n\t" \
-		" sltu	%5, %0, %z6\n\t" \
-		"bnez	%5, 3f\n" \
-		"2:\n\t" \
-		" addiu	%4, %4, -1\n\t" \
-		"subu	%0, %0, %z6\n\t" \
-		"addiu	%2, %2, 1\n" \
-		"3:\n\t" \
-		"bnez	%4, 0b\n\t" \
-		" srl	%5, %1, 0x1f\n\t" \
-		".set	pop" \
-		: "=&r" (__mod32), "=&r" (__tmp), \
-		  "=&r" (__quot32), "=&r" (__cf), \
-		  "=&r" (__i), "=&r" (__tmp2) \
-		: "Jr" (base), "0" (high), "1" (low)); \
-	\
-	(res) = __quot32; \
-	__mod32; })
-
-#define do_div(n, base) ({ \
-	unsigned long long __quot; \
-	unsigned long __mod; \
-	unsigned long long __div; \
-	unsigned long __upper, __low, __high, __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__high = __div >> 32; \
-	__low = __div; \
-	__upper = __high; \
-	\
-	if (__high) \
-		__asm__("divu	$0, %z2, %z3" \
-			: "=h" (__upper), "=l" (__high) \
-			: "Jr" (__high), "Jr" (__base) \
-			: GCC_REG_ACCUM); \
-	\
-	__mod = do_div64_32(__low, __upper, __low, __base); \
-	\
-	__quot = __high; \
-	__quot = __quot << 32 | __low; \
-	(n) = __quot; \
-	__mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
-	unsigned long __quot; \
-	unsigned int __mod; \
-	unsigned long __div; \
-	unsigned int __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__mod = __div % __base; \
-	__quot = __div / __base; \
-	\
-	(n) = __quot; \
-	__mod; })
+#define __div64_32(n, base)						\
+({									\
+	unsigned long __cf, __tmp, __tmp2, __i;				\
+	unsigned long __quot32, __mod32;				\
+	unsigned long __high, __low;					\
+	unsigned long long __n;						\
+									\
+	__high = *__n >> 32;						\
+	__low = __n;							\
+	__asm__(							\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	noreorder				\n"	\
+	"	move	%2, $0					\n"	\
+	"	move	%3, $0					\n"	\
+	"	b	1f					\n"	\
+	"	 li	%4, 0x21				\n"	\
+	"0:							\n"	\
+	"	sll	$1, %0, 0x1				\n"	\
+	"	srl	%3, %0, 0x1f				\n"	\
+	"	or	%0, $1, %5				\n"	\
+	"	sll	%1, %1, 0x1				\n"	\
+	"	sll	%2, %2, 0x1				\n"	\
+	"1:							\n"	\
+	"	bnez	%3, 2f					\n"	\
+	"	 sltu	%5, %0, %z6				\n"	\
+	"	bnez	%5, 3f					\n"	\
+	"2:							\n"	\
+	"	 addiu	%4, %4, -1				\n"	\
+	"	subu	%0, %0, %z6				\n"	\
+	"	addiu	%2, %2, 1				\n"	\
+	"3:							\n"	\
+	"	bnez	%4, 0b\n\t"					\
+	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	.set	pop"						\
+	: "=&r" (__mod32), "=&r" (__tmp),				\
+	  "=&r" (__quot32), "=&r" (__cf),				\
+	  "=&r" (__i), "=&r" (__tmp2)					\
+	: "Jr" (base), "0" (__high), "1" (__low));			\
+									\
+	(__n) = __quot32;						\
+	__mod32;							\
+})
 
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
 
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */
-- 
GitLab


From d0ce9a5a47113eec041a0972a0b86134b8fd2828 Mon Sep 17 00:00:00 2001
From: Coly Li <coly.li@suse.de>
Date: Thu, 23 Apr 2009 03:06:06 +0800
Subject: [PATCH 1356/1421] MIPS: Cavium: Add struct clocksource * argument to
 octeon_cvmcount_read()

This patch modifies parameter of octeon_cvmcount_read() from 'void' to
'struct clocksource *cs', which fixes compile warning for incompatible
parameter type.

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/csrc-octeon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 70fd92c3165..96110f217dc 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }
-- 
GitLab


From a6d5ff04e83b36e0d5c2c50ef4d18e9f38b5abc2 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Tue, 5 May 2009 12:49:47 -0700
Subject: [PATCH 1357/1421] MIPS: Use force_sig when handling address errors.

When init is started it is SIGNAL_UNKILLABLE.  If it were to get an
address error, we would try to send it SIGBUS, but it would be ignored
and the faulting instruction restarted.  This results in an endless
loop.

We need to use force_sig() instead so it will actually die and give us
some useful information.

Reported-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/unaligned.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index bf4c4a979ab..67bd626942a 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -482,19 +482,19 @@ fault:
 		return;
 
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGSEGV, current, 1);
+	force_sig(SIGSEGV, current);
 
 	return;
 
 sigbus:
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGBUS, current, 1);
+	force_sig(SIGBUS, current);
 
 	return;
 
 sigill:
 	die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
-	send_sig(SIGILL, current, 1);
+	force_sig(SIGILL, current);
 }
 
 asmlinkage void do_ade(struct pt_regs *regs)
-- 
GitLab


From 5d81b83d03eb32085c569854695e102dde7af544 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Mon, 4 May 2009 23:51:54 +0200
Subject: [PATCH 1358/1421] MIPS: Sibyte: Fix locking in set_irq_affinity

Locking of irq_desc is now done in irq_set_affinity; don't lock it again
in chip specific set_affinity function.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sibyte/bcm1480/irq.c | 7 ++-----
 arch/mips/sibyte/sb1250/irq.c  | 7 ++-----
 2 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 352352b3cb2..c147c4b35d3 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -113,7 +113,6 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	unsigned int irq_dirty;
 
@@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&bcm1480_imr_lock);
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = bcm1480_irq_owner[irq];
@@ -153,8 +151,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
 		}
 	}
-	spin_unlock(&bcm1480_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
 }
 #endif
 
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index c08ff582da6..38cb998ade2 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -107,7 +107,6 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 
 	i = cpumask_first(mask);
@@ -121,8 +120,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&sb1250_imr_lock);
+	spin_lock_irqsave(&sb1250_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
@@ -144,8 +142,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	}
-	spin_unlock(&sb1250_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 #endif
 
-- 
GitLab


From d8e2f53ac99f4ce7d63807a84f98d1b80df598cf Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 14 May 2009 07:46:59 -0400
Subject: [PATCH 1359/1421] cifs: fix error handling in parse_DFS_referrals

cifs_strndup_from_ucs returns NULL on error, not an ERR_PTR

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 75e6623a863..5759ba53dc9 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3976,9 +3976,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		max_len = data_end - temp;
 		node->path_name = cifs_strndup_from_ucs(temp, max_len,
 						      is_unicode, nls_codepage);
-		if (IS_ERR(node->path_name)) {
-			rc = PTR_ERR(node->path_name);
-			node->path_name = NULL;
+		if (!node->path_name) {
+			rc = -ENOMEM;
 			goto parse_DFS_referrals_exit;
 		}
 
@@ -3987,11 +3986,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		max_len = data_end - temp;
 		node->node_name = cifs_strndup_from_ucs(temp, max_len,
 						      is_unicode, nls_codepage);
-		if (IS_ERR(node->node_name)) {
-			rc = PTR_ERR(node->node_name);
-			node->node_name = NULL;
-			goto parse_DFS_referrals_exit;
-		}
+		if (!node->node_name)
+			rc = -ENOMEM;
 	}
 
 parse_DFS_referrals_exit:
-- 
GitLab


From fbc97e4c5c31ea198f912196b1379d7493362800 Mon Sep 17 00:00:00 2001
From: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date: Mon, 27 Apr 2009 09:23:37 +0200
Subject: [PATCH 1360/1421] eeepc-laptop: fix wlan rfkill state change during
 init

When an rfkill device is registered, the rfkill core will change its
state to the system default. So we need to prepare for state changes
*before* we register it. That means installing the eeepc-specific ACPI
callback which handles the hotplug of the wireless network adaptor.

This problem doesn't occur during normal operation.  You have to

1) Boot with wireless enabled. eeepc-laptop should load automatically.
2) modprobe -r eeepc-laptop
3) modprobe eeepc-laptop

On boot, the default rfkill state will be set to enabled.
With the current core code, step 2) will disable the wireless.
Therefore in step 3), the wireless will change state during registration,
from disabled to enabled.  But without this fix, the PCI device for the
wireless adaptor will not appear.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 6f54fd1757c..e21f7cd72e4 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -649,6 +649,9 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	if (ACPI_FAILURE(status))
 		printk(EEEPC_ERR "Error installing notify handler\n");
 
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
 	if (get_acpi(CM_ASL_WLAN) != -1) {
 		ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
 							   RFKILL_TYPE_WLAN);
@@ -704,9 +707,6 @@ static int eeepc_hotk_add(struct acpi_device *device)
 			goto bluetooth_fail;
 	}
 
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
 	return 0;
 
  bluetooth_fail:
-- 
GitLab


From 64b86b6583db832b28bb54575e32b9e2a1a7d84f Mon Sep 17 00:00:00 2001
From: Darren Salt <linux@youmustbejoking.demon.co.uk>
Date: Mon, 27 Apr 2009 09:23:38 +0200
Subject: [PATCH 1361/1421] eeepc-laptop: report brightness control events via
 the input layer

This maps the brightness control events to one of two keys, either
KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP, as needed.

Some mapping has to be done due to the fact that the BIOS reports them as
<base value> + <current brightness index>; the selection is done according to
the sign of the change in brightness (if this is 0, no keypress is reported).

(Ref. http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-April/002001.html)

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index e21f7cd72e4..f54cfeac522 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -166,6 +166,8 @@ static struct key_entry eeepc_keymap[] = {
 	{KE_KEY, 0x1b, KEY_ZOOM },
 	{KE_KEY, 0x1c, KEY_PROG2 },
 	{KE_KEY, 0x1d, KEY_PROG3 },
+	{KE_KEY, NOTIFY_BRN_MIN,     KEY_BRIGHTNESSDOWN },
+	{KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP },
 	{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
 	{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
 	{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
@@ -512,11 +514,16 @@ static int eeepc_hotk_check(void)
 	return 0;
 }
 
-static void notify_brn(void)
+static int notify_brn(void)
 {
+	/* returns the *previous* brightness, or -1 */
 	struct backlight_device *bd = eeepc_backlight_device;
-	if (bd)
+	if (bd) {
+		int old = bd->props.brightness;
 		bd->props.brightness = read_brightness(bd);
+		return old;
+	}
+	return -1;
 }
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -558,17 +565,33 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
 	static struct key_entry *key;
 	u16 count;
+	int brn = -ENODEV;
 
 	if (!ehotk)
 		return;
 	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
-		notify_brn();
+		brn = notify_brn();
 	count = ehotk->event_count[event % 128]++;
 	acpi_bus_generate_proc_event(ehotk->device, event, count);
 	acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
 					dev_name(&ehotk->device->dev), event,
 					count);
 	if (ehotk->inputdev) {
+		if (brn != -ENODEV) {
+			/* brightness-change events need special
+			 * handling for conversion to key events
+			 */
+			if (brn < 0)
+				brn = event;
+			else
+				brn += NOTIFY_BRN_MIN;
+			if (event < brn)
+				event = NOTIFY_BRN_MIN; /* brightness down */
+			else if (event > brn)
+				event = NOTIFY_BRN_MIN + 2; /* ... up */
+			else
+				event = NOTIFY_BRN_MIN + 1; /* ... unchanged */
+		}
 		key = eepc_get_entry_by_scancode(event);
 		if (key) {
 			switch (key->type) {
-- 
GitLab


From 978605c4fd8e7470f225eec7b5aab69d8796afcc Mon Sep 17 00:00:00 2001
From: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date: Mon, 27 Apr 2009 09:23:39 +0200
Subject: [PATCH 1362/1421] eeepc-laptop: Work around rfkill firmware bug

1) Buggy firmware can change the RFKILL state by itself. This is easily
   detected.  The RFKILL API states that in such cases, we should call
   rfkill_force_state() to notify the core.

   I have reported the bug to Asus. I believe this is the right thing
   to do for robustness, even if this particular firmware bug is fixed.

2) The same bug causes the wireless toggle key to be reported as 0x11
   instead of 0x10.  0x11 is otherwise unused, so it should be safe to
   add this as a new keycode.

The bug is triggered by removing the laptop battery while hibernated.

On resume, the wireless toggle key causes the firmware to toggle the
wireless state itself.  (Also, the key is reported as 0x11 when the
current wireless state is OFF).

This is very poor behaviour because the OS can't predict whether the
firmware is controlling the RFKILL state.

Without this workaround, the bug means users have to press the wireless
toggle key twice to enable, due to the OS/firmware conflict.  (Assuming
rfkill-input or equivalent is being used).  The workaround avoids this.

I believe that acpid scripts which toggle the value of the sysfs state file
when the toggle key is pressed will be rendered ineffective by the bug,
regardless of this workaround.  If they simply toggle the state, when the
firmware has already toggled it, then you will never see a state change.

Tested on "EEEPC 4G" only.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index f54cfeac522..57f21f0a565 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -158,6 +158,7 @@ enum { KE_KEY, KE_END };
 static struct key_entry eeepc_keymap[] = {
 	/* Sleep already handled via generic ACPI code */
 	{KE_KEY, 0x10, KEY_WLAN },
+	{KE_KEY, 0x11, KEY_WLAN },
 	{KE_KEY, 0x12, KEY_PROG1 },
 	{KE_KEY, 0x13, KEY_MUTE },
 	{KE_KEY, 0x14, KEY_VOLUMEDOWN },
@@ -528,6 +529,7 @@ static int notify_brn(void)
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
+	enum rfkill_state state;
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
 
@@ -539,7 +541,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		return;
 	}
 
-	if (get_acpi(CM_ASL_WLAN) == 1) {
+	eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
+
+	if (state == RFKILL_STATE_UNBLOCKED) {
 		dev = pci_get_slot(bus, 0);
 		if (dev) {
 			/* Device already present */
@@ -559,6 +563,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 			pci_dev_put(dev);
 		}
 	}
+
+	rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
 }
 
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
-- 
GitLab


From 158ca1d75dd0d6223f3b1dd741d30777da62ab80 Mon Sep 17 00:00:00 2001
From: Grigori Goronzy <greg@chown.ath.cx>
Date: Mon, 27 Apr 2009 09:23:40 +0200
Subject: [PATCH 1363/1421] eeepc-laptop: support for super hybrid engine (SHE)

The older eeepc-acpi driver allowed to control the SHE performance
preset through a ACPI function for just this purpose. SHE underclocks
and undervolts the FSB and undervolts the CPU (at preset 2,
"powersave"), or slightly overclocks the CPU (at preset 0,
"performance"). Preset 1 is the default setting with default clocks and
voltage.

The new eeepc-laptop driver doesn't support it anymore.
The attached patch adds support for it to eeepc-laptop. It's very
straight-forward and almost trivial.

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 57f21f0a565..7aaf5879f66 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -384,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf)
 EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
 EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
 EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
+EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
 
 static struct attribute *platform_attributes[] = {
 	&dev_attr_camera.attr,
 	&dev_attr_cardr.attr,
 	&dev_attr_disp.attr,
+	&dev_attr_cpufv.attr,
 	NULL
 };
 
-- 
GitLab


From 309f5fbda37d5e8f1233e8b80b8e9de77262e864 Mon Sep 17 00:00:00 2001
From: Corentin Chary <corentincj@iksaif.net>
Date: Mon, 27 Apr 2009 09:23:42 +0200
Subject: [PATCH 1364/1421] asus-laptop: fix input keycode

KEY_STOP is now KEY_STOPCD
 It's the correct key to stop a media
BTN_EXTRA is now KEY_SCREENLOCK:
 The laptop manual tells us that this key is for screenlock
KEY_TV is now KEY_PROG1
 So it can be reported to X server

Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361505

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/asus-laptop.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index eeafc6c0160..bfc1a8892a3 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = {
 	{KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
 	{KE_KEY, 0x40, KEY_PREVIOUSSONG},
 	{KE_KEY, 0x41, KEY_NEXTSONG},
-	{KE_KEY, 0x43, KEY_STOP},
+	{KE_KEY, 0x43, KEY_STOPCD},
 	{KE_KEY, 0x45, KEY_PLAYPAUSE},
 	{KE_KEY, 0x50, KEY_EMAIL},
 	{KE_KEY, 0x51, KEY_WWW},
-	{KE_KEY, 0x5C, BTN_EXTRA},  /* Performance */
+	{KE_KEY, 0x5C, KEY_SCREENLOCK},  /* Screenlock */
 	{KE_KEY, 0x5D, KEY_WLAN},
 	{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
 	{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
 	{KE_KEY, 0x82, KEY_CAMERA},
-	{KE_KEY, 0x8A, KEY_TV},
+	{KE_KEY, 0x8A, KEY_PROG1},
 	{KE_KEY, 0x95, KEY_MEDIA},
 	{KE_KEY, 0x99, KEY_PHONE},
 	{KE_END, 0},
-- 
GitLab


From bd32005e126a465deda5d046a62f6bb842f4d9cf Mon Sep 17 00:00:00 2001
From: Corentin Chary <corentincj@iksaif.net>
Date: Mon, 27 Apr 2009 09:23:43 +0200
Subject: [PATCH 1365/1421] eeepc-laptop: unregister_rfkill_notifier on failure

If there is a failure during eeepc_hotk_add() we need
to remove the acpi_notify_handler.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 7aaf5879f66..353a898c369 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -748,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
  wlan_fail:
 	if (ehotk->eeepc_wlan_rfkill)
 		rfkill_free(ehotk->eeepc_wlan_rfkill);
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
 	kfree(ehotk);
 	ehotk = NULL;
-- 
GitLab


From 5a641bcd6398841cc4606b0a732d41a09256fd94 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 14 May 2009 08:49:13 -0700
Subject: [PATCH 1366/1421] ALSA: pcsp: fix printk format warning

Fix printk format warning:

sound/drivers/pcsp/pcsp_mixer.c:54: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/drivers/pcsp/pcsp_mixer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index caeb0f57fcc..771955a9be7 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,7 +50,7 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol,
 	uinfo->value.enumerated.items = chip->max_treble + 1;
 	if (uinfo->value.enumerated.item > chip->max_treble)
 		uinfo->value.enumerated.item = chip->max_treble;
-	sprintf(uinfo->value.enumerated.name, "%d",
+	sprintf(uinfo->value.enumerated.name, "%lu",
 			PCSP_CALC_RATE(uinfo->value.enumerated.item));
 	return 0;
 }
-- 
GitLab


From be687518781f5aed86bcc152023b9fcb4d5c6b50 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 14 May 2009 10:23:09 -0600
Subject: [PATCH 1367/1421] powerpc/boot: add simpleImage.* to clean-files list

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4458abb67c5..bff7f127ce1 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -367,7 +367,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
-	otheros.bld *.dtb
+	simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
-- 
GitLab


From 514a30d95f3277b9abed6044272ea97431bb9658 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 14 May 2009 10:23:10 -0600
Subject: [PATCH 1368/1421] powerpc/virtex: Add uImage to the default images
 list

It is common to use U-Boot on Xilinx Virtex platforms.  This patch
ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/40x/Kconfig | 1 +
 arch/powerpc/platforms/44x/Kconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 14e027f5be6..f39c953d535 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -153,6 +153,7 @@ config 405GPR
 
 config XILINX_VIRTEX
 	bool
+	select DEFAULT_UIMAGE
 
 config XILINX_VIRTEX_II_PRO
 	bool
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index bf5c7ff2e6e..0d83a6a0397 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -246,6 +246,7 @@ config IBM440EP_ERR42
 # Xilinx specific config options.
 config XILINX_VIRTEX
 	bool
+	select DEFAULT_UIMAGE
 
 # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
 config XILINX_VIRTEX_5_FXT
-- 
GitLab


From ba10eedf5a3fba991563873d4cb65a067aa13f24 Mon Sep 17 00:00:00 2001
From: John Linn <john.linn@xilinx.com>
Date: Thu, 14 May 2009 10:23:11 -0600
Subject: [PATCH 1369/1421] powerpc/virtex: Fix duplicate level irq events.

The interrupt controller was not handling level interrupts correctly
such that duplicate interrupts were happening. This fixes the problem
and adds edge type interrupts which are needed in Xilinx hardware.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/sysdev/xilinx_intc.c | 117 +++++++++++++++++++++++++++---
 1 file changed, 107 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index a22e1a2df1a..c658b413c9b 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -41,8 +41,32 @@
 
 static struct irq_host *master_irqhost;
 
+#define XILINX_INTC_MAXIRQS	(32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+	IRQ_TYPE_EDGE_RISING,
+	IRQ_TYPE_EDGE_FALLING,
+	IRQ_TYPE_LEVEL_HIGH,
+	IRQ_TYPE_LEVEL_LOW,
+};
+
 /*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
  */
 static void xilinx_intc_mask(unsigned int virq)
 {
@@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq)
 	out_be32(regs + XINTC_CIE, 1 << irq);
 }
 
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+	struct irq_desc *desc = get_irq_desc(virq);
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+	return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
 	pr_debug("unmask: %d\n", irq);
 	out_be32(regs + XINTC_SIE, 1 << irq);
+
+	/* ack level irqs because they can't be acked during
+	 * ack function since the handle_level_irq function
+	 * acks the irq before calling the inerrupt handler
+	 */
+	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+	.typename = "Xilinx Level INTC",
+	.mask = xilinx_intc_mask,
+	.mask_ack = xilinx_intc_mask,
+	.unmask = xilinx_intc_level_unmask,
+	.set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void *regs = get_irq_chip_data(virq);
+	pr_debug("unmask: %d\n", irq);
+	out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
@@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq)
 	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static struct irq_chip xilinx_intc_irqchip = {
-	.typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+	.typename = "Xilinx Edge  INTC",
 	.mask = xilinx_intc_mask,
-	.unmask = xilinx_intc_unmask,
-	.ack = xilinx_intc_ack,
+	.unmask = xilinx_intc_edge_unmask,
+	.ack = xilinx_intc_edge_ack,
+	.set_type = xilinx_intc_set_type,
 };
 
 /*
  * IRQ Host operations
  */
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+				u32 *intspec, unsigned int intsize,
+				irq_hw_number_t *out_hwirq,
+				unsigned int *out_flags)
+{
+	if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+		return -EINVAL;
+
+	/* keep a copy of the interrupt type til the interrupt is mapped
+	 */
+	xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+	/* Xilinx uses 2 interrupt entries, the 1st being the h/w
+	 * interrupt number, the 2nd being the interrupt type, edge or level
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = xilinx_intc_map_senses[intspec[1]];
+
+	return 0;
+}
 static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
 				  irq_hw_number_t irq)
 {
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
-	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+	    xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+		set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+			handle_level_irq);
+	} else {
+		set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+			handle_edge_irq);
+	}
 	return 0;
 }
 
 static struct irq_host_ops xilinx_intc_ops = {
 	.map = xilinx_intc_map,
+	.xlate = xilinx_intc_xlate,
 };
 
 struct irq_host * __init
@@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np)
 	out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
 
 	/* Allocate and initialize an irq_host structure. */
-	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+			     &xilinx_intc_ops, -1);
 	if (!irq)
 		panic(__FILE__ ": Cannot allocate IRQ host\n");
 	irq->host_data = regs;
-- 
GitLab


From 29321357ac6db54eeb8574da1f6c3e0ce8cfbb60 Mon Sep 17 00:00:00 2001
From: Vladimir Zajac <eightgraph@gmail.com>
Date: Wed, 6 May 2009 19:34:21 +0200
Subject: [PATCH 1370/1421] thermal: fix off-by-1 error in trip point trigger
 condition

This patch fixes a regression caused by commit
b1569e99c795bf83b4ddf41c4f1c42761ab7f75e
"ACPI: move thermal trip handling to generic thermal layer"
which accidentally changed trip point trigger condition to
  temp > trip_temp

This patch changes the trigger condition back to
  temp >= trip_temp

Signed-off-by: Vladimir Zajac <eightgraph@gmail.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/thermal/thermal_sys.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index d0b093b66ad..5e38ba10a3a 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 		switch (trip_type) {
 		case THERMAL_TRIP_CRITICAL:
-			if (temp > trip_temp) {
+			if (temp >= trip_temp) {
 				if (tz->ops->notify)
 					ret = tz->ops->notify(tz, count,
 							      trip_type);
@@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 			}
 			break;
 		case THERMAL_TRIP_HOT:
-			if (temp > trip_temp)
+			if (temp >= trip_temp)
 				if (tz->ops->notify)
 					tz->ops->notify(tz, count, trip_type);
 			break;
@@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 				cdev = instance->cdev;
 
-				if (temp > trip_temp)
+				if (temp >= trip_temp)
 					cdev->ops->set_cur_state(cdev, 1);
 				else
 					cdev->ops->set_cur_state(cdev, 0);
 			}
 			break;
 		case THERMAL_TRIP_PASSIVE:
-			if (temp > trip_temp || tz->passive)
+			if (temp >= trip_temp || tz->passive)
 				thermal_zone_device_passive(tz, temp,
 							    trip_temp, count);
 			break;
-- 
GitLab


From 2757495c906113896b378bf084708846273c87b2 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Thu, 14 May 2009 13:10:02 -0400
Subject: [PATCH 1371/1421] Btrfs: init inode ordered_data_close flag properly

This flag is used to decide when we need to send a given file through
the ordered code to make sure it is fully written before a transaction
commits.  It was not being properly set to zero when the inode was
being setup.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 90c23eb2882..22450bd972d 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3122,6 +3122,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 	bi->flags = 0;
 	bi->index_cnt = (u64)-1;
 	bi->last_unlink_trans = 0;
+	bi->ordered_data_close = 0;
 	extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
 	extent_io_tree_init(&BTRFS_I(inode)->io_tree,
 			     inode->i_mapping, GFP_NOFS);
-- 
GitLab


From 76a05b35a320e8c968d0fec8f512a1acae227309 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Thu, 14 May 2009 13:24:30 -0400
Subject: [PATCH 1372/1421] Btrfs: Don't loop forever on metadata IO failures

When a btrfs metadata read fails, the first thing we try to do is find
a good copy on another mirror of the block.  If this fails, read_tree_block()
ends up returning a buffer that isn't up to date.

The btrfs btree reading code was reworked to drop locks and repeat
the search when IO was done, but the changes didn't add a check for failed
reads.  The end result was looping forever on buffers that were never
going to become up to date.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ctree.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index a99f1c2a710..fedf8b9f03a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1469,6 +1469,7 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	u32 blocksize;
 	struct extent_buffer *b = *eb_ret;
 	struct extent_buffer *tmp;
+	int ret;
 
 	blocknr = btrfs_node_blockptr(b, slot);
 	gen = btrfs_node_ptr_generation(b, slot);
@@ -1476,6 +1477,10 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 
 	tmp = btrfs_find_tree_block(root, blocknr, blocksize);
 	if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+		/*
+		 * we found an up to date block without sleeping, return
+		 * right away
+		 */
 		*eb_ret = tmp;
 		return 0;
 	}
@@ -1483,7 +1488,9 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	/*
 	 * reduce lock contention at high levels
 	 * of the btree by dropping locks before
-	 * we read.
+	 * we read.  Don't release the lock on the current
+	 * level because we need to walk this node to figure
+	 * out which blocks to read.
 	 */
 	btrfs_unlock_up_safe(p, level + 1);
 	btrfs_set_path_blocking(p);
@@ -1494,10 +1501,21 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 		reada_for_search(root, p, level, slot, key->objectid);
 
 	btrfs_release_path(NULL, p);
+
+	ret = -EAGAIN;
 	tmp = read_tree_block(root, blocknr, blocksize, gen);
-	if (tmp)
+	if (tmp) {
+		/*
+		 * If the read above didn't mark this buffer up to date,
+		 * it will never end up being up to date.  Set ret to EIO now
+		 * and give up so that our caller doesn't loop forever
+		 * on our EAGAINs.
+		 */
+		if (!btrfs_buffer_uptodate(tmp, 0))
+			ret = -EIO;
 		free_extent_buffer(tmp);
-	return -EAGAIN;
+	}
+	return ret;
 }
 
 /*
@@ -1696,6 +1714,9 @@ cow_done:
 			if (ret == -EAGAIN)
 				goto again;
 
+			if (ret == -EIO)
+				goto done;
+
 			if (!p->skip_locking) {
 				int lret;
 
@@ -1738,6 +1759,8 @@ done:
 	 */
 	if (!p->leave_spinning)
 		btrfs_set_path_blocking(p);
+	if (ret < 0)
+		btrfs_release_path(root, p);
 	return ret;
 }
 
@@ -4212,6 +4235,11 @@ again:
 		if (ret == -EAGAIN)
 			goto again;
 
+		if (ret < 0) {
+			btrfs_release_path(root, path);
+			goto done;
+		}
+
 		if (!path->skip_locking) {
 			ret = btrfs_try_spin_lock(next);
 			if (!ret) {
@@ -4246,6 +4274,11 @@ again:
 		if (ret == -EAGAIN)
 			goto again;
 
+		if (ret < 0) {
+			btrfs_release_path(root, path);
+			goto done;
+		}
+
 		if (!path->skip_locking) {
 			btrfs_assert_tree_locked(path->nodes[level]);
 			ret = btrfs_try_spin_lock(next);
-- 
GitLab


From cc7b0c9b701a079016183f3546b4d720194b367f Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Thu, 14 May 2009 13:31:21 -0400
Subject: [PATCH 1373/1421] Btrfs: remove some WARN_ONs in the IO failure path

These debugging WARN_ONs make too much console noise during regular
IO failures.  An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c | 2 --
 fs/btrfs/inode.c   | 1 -
 2 files changed, 3 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 0ff16d3331d..4b0ea0b80c2 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -848,8 +848,6 @@ struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
 
 	if (ret == 0)
 		set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
-	else
-		WARN_ON(1);
 	return buf;
 
 }
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 22450bd972d..1c8b0190d03 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4296,7 +4296,6 @@ out:
 	}
 	if (err) {
 		free_extent_map(em);
-		WARN_ON(1);
 		return ERR_PTR(err);
 	}
 	return em;
-- 
GitLab


From 5d847a8ed970d17e2734ff9e07a74fe36cceb24e Mon Sep 17 00:00:00 2001
From: Li Hong <lihong.hi@gmail.com>
Date: Thu, 14 May 2009 13:52:21 -0400
Subject: [PATCH 1374/1421] Btrfs: remove outdated comment in
 btrfs_ioctl_resize()

In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33,
a combination call of kmalloc() and copy_from_user() is replaced by
memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ioctl.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 48762aa1e94..db84aa48ab7 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -437,10 +437,6 @@ out_unlock:
 	return 0;
 }
 
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-
 static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
 {
 	u64 new_size;
-- 
GitLab


From 6b65c5c61bf86086817a5ed786c8f45755ac83b3 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 14 May 2009 13:52:21 -0400
Subject: [PATCH 1375/1421] Btrfs: make show_options result match actual option
 names

The notreelog and flushoncommit mount options were being printed slightly
differently.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index bf0e84c7560..e99510bfbff 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -436,9 +436,9 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (btrfs_test_opt(root, SSD))
 		seq_puts(seq, ",ssd");
 	if (btrfs_test_opt(root, NOTREELOG))
-		seq_puts(seq, ",no-treelog");
+		seq_puts(seq, ",notreelog");
 	if (btrfs_test_opt(root, FLUSHONCOMMIT))
-		seq_puts(seq, ",flush-on-commit");
+		seq_puts(seq, ",flushoncommit");
 	if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
 		seq_puts(seq, ",noacl");
 	return 0;
-- 
GitLab


From 9f55684c2d9869e8cc53595a3fee679958511cfb Mon Sep 17 00:00:00 2001
From: Sankar P <sankar.curiosity@gmail.com>
Date: Thu, 14 May 2009 13:52:22 -0400
Subject: [PATCH 1376/1421] Btrfs: Spelling fix in
 btrfs_lookup_first_block_group comments

Signed-off-by: Sankar P <sankar.curiosity@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent-tree.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index e4966444811..3e2c7c738f2 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -312,7 +312,7 @@ btrfs_lookup_first_block_group(struct btrfs_fs_info *info, u64 bytenr)
 }
 
 /*
- * return the block group that contains teh given bytenr
+ * return the block group that contains the given bytenr
  */
 struct btrfs_block_group_cache *btrfs_lookup_block_group(
 						 struct btrfs_fs_info *info,
-- 
GitLab


From 2a8964d63d50dd2d65d71d342bc7fb6ef4117614 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Thu, 14 May 2009 17:05:39 -0400
Subject: [PATCH 1377/1421] ext4: Clear the unwritten buffer_head flag after
 the extent is initialized

The BH_Unwritten flag indicates that the buffer is allocated on disk
but has not been written; that is, the disk was part of a persistent
preallocation area.  That flag should only be set when a get_blocks()
function is looking up a inode's logical to physical block mapping.

When ext4_get_blocks_wrap() is called with create=1, the uninitialized
extent is converted into an initialized one, so the BH_Unwritten flag
is no longer appropriate.  Hence, we need to make sure the
BH_Unwritten is not left set, since the combination of BH_Mapped and
BH_Unwritten is not allowed; among other things, it will result ext4's
get_block() to be called over and over again during the write_begin
phase of write(2).

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0ac31a06422..2a9ffd528dd 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1149,6 +1149,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	int retval;
 
 	clear_buffer_mapped(bh);
+	clear_buffer_unwritten(bh);
 
 	/*
 	 * Try to see if we can get  the block without requesting
@@ -1178,6 +1179,18 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	if (retval > 0 && buffer_mapped(bh))
 		return retval;
 
+	/*
+	 * When we call get_blocks without the create flag, the
+	 * BH_Unwritten flag could have gotten set if the blocks
+	 * requested were part of a uninitialized extent.  We need to
+	 * clear this flag now that we are committed to convert all or
+	 * part of the uninitialized extent to be an initialized
+	 * extent.  This is because we need to avoid the combination
+	 * of BH_Unwritten and BH_Mapped flags being simultaneously
+	 * set on the buffer_head.
+	 */
+	clear_buffer_unwritten(bh);
+
 	/*
 	 * New blocks allocate and/or writing to uninitialized extent
 	 * will possibly result in updating i_data, so we take
-- 
GitLab


From 13f4c435ebf2a7c150ffa714f3b23b8e4e8cb42f Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Tue, 12 May 2009 15:27:36 -0700
Subject: [PATCH 1378/1421] drm/i915: Don't allow binding objects into the last
 page of the aperture.

This should avoid a class of bugs where the hardware prefetches past the
end of the object, and walks into unallocated memory when the object is
bound to the last page of the aperture.

fd.o bug #21488

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 051134c56ae..3133f991968 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	/* Basic memrange allocator for stolen space (aka vram) */
 	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
 
-	/* Let GEM Manage from end of prealloc space to end of aperture */
-	i915_gem_do_init(dev, prealloc_size, agp_size);
+	/* Let GEM Manage from end of prealloc space to end of aperture.
+	 *
+	 * However, leave one page at the end still bound to the scratch page.
+	 * There are a number of places where the hardware apparently
+	 * prefetches past the end of the object, and we've seen multiple
+	 * hangs with the GPU head pointer stuck in a batchbuffer bound
+	 * at the last page of the aperture.  One page should be enough to
+	 * keep any prefetching inside of the aperture.
+	 */
+	i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
 
 	ret = i915_gem_init_ringbuffer(dev);
 	if (ret)
-- 
GitLab


From 0ba0e9e1f173a59ba402a253d356612c821b7a14 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Tue, 7 Apr 2009 11:02:28 +0800
Subject: [PATCH 1379/1421] drm/i915: workaround IGD i2c bus issue in kernel
 side (v2)

In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c
access will be wrong.

v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_reg.h    |  1 +
 drivers/gpu/drm/i915/intel_drv.h   |  2 +-
 drivers/gpu/drm/i915/intel_i2c.c   | 17 +++++++++++++++++
 drivers/gpu/drm/i915/intel_modes.c |  6 ++++++
 4 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 52119473226..15da44cf21b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -526,6 +526,7 @@
 #define   DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
 #define D_STATE		0x6104
 #define CG_2D_DIS	0x6200
+#define DPCUNIT_CLOCK_GATE_DISABLE	(1 << 24)
 #define CG_3D_DIS	0x6204
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 957daef8edf..cf294302893 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 void intel_i2c_destroy(struct intel_i2c_chan *chan);
 int intel_ddc_get_modes(struct intel_output *intel_output);
 extern bool intel_ddc_probe(struct intel_output *intel_output);
-
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
 extern void intel_crt_init(struct drm_device *dev);
 extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
 extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 5ee9d4c2575..f7061f68d05 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -34,6 +34,21 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* When using bit bashing for I2C, this bit needs to be set to 1 */
+	if (!IS_IGD(dev))
+		return;
+	if (enable)
+		I915_WRITE(CG_2D_DIS,
+			I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE);
+	else
+		I915_WRITE(CG_2D_DIS,
+			I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+}
+
 /*
  * Intel GPIO access functions
  */
@@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 		goto out_free;
 
 	/* JJJ:  raise SCL and SDA? */
+	intel_i2c_quirk_set(dev, true);
 	set_data(chan, 1);
 	set_clock(chan, 1);
+	intel_i2c_quirk_set(dev, false);
 	udelay(20);
 
 	return chan;
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 07d7ec97616..e0910fefce8 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -27,6 +27,7 @@
 #include <linux/fb.h>
 #include "drmP.h"
 #include "intel_drv.h"
+#include "i915_drv.h"
 
 /**
  * intel_ddc_probe
@@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output)
 		}
 	};
 
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
 	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+
 	if (ret == 2)
 		return true;
 
@@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output)
 	struct edid *edid;
 	int ret = 0;
 
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
 	edid = drm_get_edid(&intel_output->base,
 			    &intel_output->ddc_bus->adapter);
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&intel_output->base,
 							edid);
-- 
GitLab


From 802c7eb646848d769a07704c16f7a3bbec9e5829 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Tue, 5 May 2009 16:03:48 -0700
Subject: [PATCH 1380/1421] drm/i915: sanity check IER at wait_request time

We might sleep here anyway so I hope an extra uncached read is ok to
add.

In #20896 we found that vbetool clobbers the IER.  In KMS mode this is
particularly bad since we don't set the interrupt regs late (in
EnterVT), so we'd fail to get *any* interrupts at all after X started
(since some distros have scripts that call vbetool at X startup
apparently).

So this patch checks IER at wait_request time, and re-enables
interrupts if it's been clobbered.  In a proper config this check
should never be triggered.

This is really a distro issue, but having a sanity check is nice, as
long as it doesn't have a real performance hit.

Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Moved the check inside of the sleeping case to avoid perf cost]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ee896d91c5b..b189b49c760 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1691,11 +1691,20 @@ static int
 i915_wait_request(struct drm_device *dev, uint32_t seqno)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 ier;
 	int ret = 0;
 
 	BUG_ON(seqno == 0);
 
 	if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+		ier = I915_READ(IER);
+		if (!ier) {
+			DRM_ERROR("something (likely vbetool) disabled "
+				  "interrupts, re-enabling\n");
+			i915_driver_irq_preinstall(dev);
+			i915_driver_irq_postinstall(dev);
+		}
+
 		dev_priv->mm.waiting_gem_seqno = seqno;
 		i915_user_irq_get(dev);
 		ret = wait_event_interruptible(dev_priv->irq_queue,
-- 
GitLab


From 425d244c86700bdbc68d096c812336b6a5b9b4e9 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 5 May 2009 10:00:25 -0400
Subject: [PATCH 1381/1421] drm/i915: ignore LVDS on intel graphics systems
 that lie about having it

There are a number of small form factor desktop systems with Intel mobile
graphics chips that lie and say they have an LVDS. With kernel mode-setting,
this becomes a problem, and makes native resolution boot go haywire -- for
example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to
have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080
display uses only the top left 1024x768, and auto-configured X will end
up only 1024x768 as well. With this change, graphical boot and X
both do 1920x1080 as expected.

Note that we're simply embracing and extending the early bail-out code
in place for the Mac Mini here. The xorg intel driver uses pci subsystem
device and vendor id for matching, while we're using dmi lookups here.
The MSI addition is courtesy of and tested by Bill Nottingham.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_lvds.c | 54 ++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6619f26e46a..439a8651499 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -384,7 +384,51 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
 	.destroy = intel_lvds_enc_destroy,
 };
 
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+	return 1;
+}
 
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id __initdata intel_no_lvds[] = {
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core 2 series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI IM-945GSE-A",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell Studio Hybrid",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+		},
+	},
+
+	/* FIXME: add a check for the Aopen Mini PC */
+
+	{ }	/* terminating entry */
+};
 
 /**
  * intel_lvds_init - setup LVDS connectors on this device
@@ -404,15 +448,9 @@ void intel_lvds_init(struct drm_device *dev)
 	u32 lvds;
 	int pipe;
 
-	/* Blacklist machines that we know falsely report LVDS. */
-	/* FIXME: add a check for the Aopen Mini PC */
-
-	/* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
-	if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
-	   dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
-		DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+	/* Skip init on machines we know falsely report LVDS */
+	if (dmi_check_system(intel_no_lvds))
 		return;
-	}
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output) {
-- 
GitLab


From e92597cffffabe9a9a85db462045330970c498d0 Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Wed, 13 May 2009 14:46:12 +0800
Subject: [PATCH 1382/1421] drm/i915: Use the GM45 VGA hotplug workaround on
 G45 as well.

Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for
mobile platform, it is also required to detect vga on G4x desktops correctly.
Tested on G45/G43/Q45 platforms with no regressions.

It fixed freedesktop.org bug #21120 and part of bug #21210

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_crt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9bdd959260a..19148c3df63 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -161,7 +161,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
-	if (IS_GM45(dev))
+	if (IS_G4X(dev))
 		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
 
 	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-- 
GitLab


From c9ed4486bdee3b54cb544fc181057bc6bf1ae45c Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Wed, 13 May 2009 15:08:27 +0800
Subject: [PATCH 1383/1421] drm/i915: Include 965GME pci ID in IS_I965GM(dev)
 to match UMS.

It fixed bug #21659

Signed-off-by: Ma Ling <ling.ma@intel.com>
[anholt: hand-applied because git-am is too picky]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b47af07f391..9b149fe824c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -786,7 +786,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x2E22 || \
 		       (dev)->pci_device == 0x2E32)
 
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
+			(dev)->pci_device == 0x2A12)
 
 #define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
 
-- 
GitLab


From 9d2949a4cdb77b9b5c243c79be6489d34d770c7c Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Mon, 11 May 2009 11:33:22 +0800
Subject: [PATCH 1384/1421] drm/i915: Set HDMI hot plug interrupt enable for
 only the output in question.

We detect HDMI output connection status by writing to HOT Plug Interrupt
Detect Enable bit in PORT_HOTPLUG_EN.  The behavior will generate a specified
interrupt, which is caught by audio driver, but during one detection driver
set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong
interrupt signals for current output, according to the signals audio driver
misunderstand device status. The patch intends to handle corresponding
output precisely.

It fixed freedesktop.org bug #21371

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 55037422538..d0983bb93a1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -155,11 +155,18 @@ intel_hdmi_detect(struct drm_connector *connector)
 
 	temp = I915_READ(PORT_HOTPLUG_EN);
 
-	I915_WRITE(PORT_HOTPLUG_EN,
-		   temp |
-		   HDMIB_HOTPLUG_INT_EN |
-		   HDMIC_HOTPLUG_INT_EN |
-		   HDMID_HOTPLUG_INT_EN);
+	switch (hdmi_priv->sdvox_reg) {
+	case SDVOB:
+		temp |= HDMIB_HOTPLUG_INT_EN;
+		break;
+	case SDVOC:
+		temp |= HDMIC_HOTPLUG_INT_EN;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	I915_WRITE(PORT_HOTPLUG_EN, temp);
 
 	POSTING_READ(PORT_HOTPLUG_EN);
 
-- 
GitLab


From 08d7b3d1edff84bd673d9e9ab36b5aa62e1ba903 Mon Sep 17 00:00:00 2001
From: Carl Worth <cworth@cworth.org>
Date: Wed, 29 Apr 2009 14:43:54 -0700
Subject: [PATCH 1385/1421] drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.

This allows userlevel code to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC.  Failure to use
the right pipe mapping can result in GPU hangs, or at least failure
to actually sync to vblank.

Signed-off-by: Carl Worth <cworth@cworth.org>
[anholt: Style touchups from review]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |  2 ++
 include/drm/i915_drm.h               | 10 +++++++++
 4 files changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 3133f991968..53d54455262 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1358,6 +1358,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
 	DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
 	DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
 	DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
+	DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
 };
 
 int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bdcda36953b..3387cf32f38 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1804,6 +1804,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	}
 }
 
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+	struct drm_crtc *crtc = NULL;
+	int pipe = -1;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+		if (crtc->base.id == pipe_from_crtc_id->crtc_id) {
+			pipe = intel_crtc->pipe;
+			break;
+		}
+	}
+
+	if (pipe == -1) {
+		DRM_ERROR("no such CRTC id\n");
+		return -EINVAL;
+	}
+
+	pipe_from_crtc_id->pipe = pipe;
+
+       return 0;
+}
+
 struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
 {
 	struct drm_crtc *crtc = NULL;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cf294302893..cd4b9c5f715 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
 
 extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 						    struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
 extern void intel_wait_for_vblank(struct drm_device *dev);
 extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 95962fa8398..8e1e92583fb 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -184,6 +184,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_I915_GEM_GET_TILING	0x22
 #define DRM_I915_GEM_GET_APERTURE 0x23
 #define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -219,6 +220,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
 #define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
 #define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying
  * on the security mechanisms provided by hardware.
@@ -657,4 +659,12 @@ struct drm_i915_gem_get_aperture {
 	__u64 aper_available_size;
 };
 
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
 #endif				/* _I915_DRM_H_ */
-- 
GitLab


From 93f1cc609c702a83e44da51cabdd353b20c24f79 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Thu, 30 Apr 2009 18:16:44 +0000
Subject: [PATCH 1386/1421] powerpc: Fix mktree build error on Mac OS X host

The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails.  Change this to
"unsigned int".

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/mktree.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index 45d06a8c7cd..c2baae0a3d8 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -42,7 +42,7 @@ int main(int argc, char *argv[])
 {
 	int	in_fd, out_fd;
 	int	nblks, i;
-	uint	cksum, *cp;
+	unsigned int	cksum, *cp;
 	struct	stat	st;
 	boot_block_t	bt;
 
@@ -90,7 +90,7 @@ int main(int argc, char *argv[])
 
 	cksum = 0;
 	cp = (void *)&bt;
-	for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+	for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
 		cksum += *cp++;
 
 	/* Assume zImage is an ELF file, and skip the 64K header.
@@ -101,7 +101,7 @@ int main(int argc, char *argv[])
 		exit(4);
 	}
 
-	if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+	if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
 		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
 		exit(4);
 	}
@@ -125,8 +125,8 @@ int main(int argc, char *argv[])
 			perror("zImage read");
 			exit(5);
 		}
-		cp = (uint *)tmpbuf;
-		for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+		cp = (unsigned int *)tmpbuf;
+		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
 			cksum += *cp++;
 		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
 			perror("boot-image write");
-- 
GitLab


From 397717c578a5e02cf76b6c99c68f50fee94b59f8 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell  x <sfr@canb.auug.org.au>
Date: Wed, 6 May 2009 14:07:52 +0000
Subject: [PATCH 1387/1421] powerpc/iseries: Fix pci breakage due to bad
 dma_data initialization

Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code.  Commit
7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation.  Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.

Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/iseries/iommu.h | 4 ----
 arch/powerpc/platforms/iseries/iommu.c   | 6 +++++-
 arch/powerpc/platforms/iseries/pci.c     | 1 -
 3 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
index c59ee7e4bed..1b9692c6089 100644
--- a/arch/powerpc/include/asm/iseries/iommu.h
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -26,10 +26,6 @@ struct vio_dev;
 struct device_node;
 struct iommu_table;
 
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
-				       struct device_node *dn);
-
 /* Get table parameters from HV */
 extern void iommu_table_getparms_iSeries(unsigned long busno,
 		unsigned char slotno, unsigned char virtbus,
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ff43f1fd834..40219823d9b 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
 }
 
 
-void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
+static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 {
 	struct iommu_table *tbl;
+	struct device_node *dn = pdev->sysdata;
 	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
@@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
 		kfree(tbl);
 	pdev->dev.archdata.dma_data = pdn->iommu_table;
 }
+#else
+#define pci_dma_dev_setup_iseries	NULL
 #endif
 
 static struct iommu_table veth_iommu_table;
@@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void)
 	ppc_md.tce_build = tce_build_iSeries;
 	ppc_md.tce_free  = tce_free_iSeries;
 
+	ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries;
 	set_pci_dma_ops(&dma_iommu_ops);
 }
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 02a634faedb..21cddc30220 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	pdev->sysdata = node;
 	allocate_device_bars(pdev);
 	iseries_device_information(pdev, bus, *sub_bus);
-	iommu_devnode_init_iSeries(pdev, node);
 }
 
 /*
-- 
GitLab


From e5fc948b11a9d0aee1cabe7c82726bc36d496875 Mon Sep 17 00:00:00 2001
From: Maynard Johnson <maynardj@us.ibm.com>
Date: Thu, 7 May 2009 05:48:32 +0000
Subject: [PATCH 1388/1421] powerpc: Fix oprofile sampling of marked events on
 POWER7

Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.

Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>").  In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt.  But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address.  With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP.  But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information.  Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions.  The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.

Signed-off-by: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/oprofile/op_model_power4.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 3e3d91f536e..80774092db7 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -26,6 +26,7 @@
 static unsigned long reset_value[OP_MAX_COUNTER];
 
 static int oprofile_running;
+static int use_slot_nums;
 
 /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
 static u32 mmcr0_val;
@@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	else
 		mmcr0_val |= MMCR0_PROBLEM_DISABLE;
 
+	if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+	    __is_processor(PV_970) || __is_processor(PV_970FX) ||
+	    __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+	    __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+		use_slot_nums = 1;
+
 	return 0;
 }
 
@@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs)
 
 	mmcra = mfspr(SPRN_MMCRA);
 
-	if (mmcra & MMCRA_SAMPLE_ENABLE) {
+	if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
 		slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
 		if (slot > 1)
 			pc += 4 * (slot - 1);
-- 
GitLab


From 31207dab7d2e63795eb15823947bd2f7025b08e2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 8 May 2009 12:08:20 +0000
Subject: [PATCH 1389/1421] powerpc/mpic: Fix incorrect allocation of interrupt
 rev-map

Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map.  However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0).  This causes us to always call
irq_find_mapping() from mpic_get_irq().

By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 21b95670159..0efc12d1a3d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1057,13 +1057,6 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
-	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
-				       isu_size, &mpic_host_ops,
-				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-	if (mpic->irqhost == NULL)
-		return NULL;
-
-	mpic->irqhost->host_data = mpic;
 	mpic->hc_irq = mpic_irq_chip;
 	mpic->hc_irq.typename = name;
 	if (flags & MPIC_PRIMARY)
@@ -1213,6 +1206,15 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
+	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+				       isu_size ? isu_size : mpic->num_sources,
+				       &mpic_host_ops,
+				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+	if (mpic->irqhost == NULL)
+		return NULL;
+
+	mpic->irqhost->host_data = mpic;
+
 	/* Display version */
 	switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
 	case 1:
-- 
GitLab


From 49a849652513235a244dfbf5e58c54f796bd1148 Mon Sep 17 00:00:00 2001
From: Becky Bruce <beckyb@kernel.crashing.org>
Date: Fri, 8 May 2009 12:19:27 +0000
Subject: [PATCH 1390/1421] powerpc: Allow mem=x cmdline to work with 4G+

We're currently choking on mem=4g (and above) due to memory_limit
being specified as an unsigned long. Make memory_limit
phys_addr_t to fix this.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/system.h   | 2 +-
 arch/powerpc/kernel/machine_kexec.c | 4 ++--
 arch/powerpc/kernel/prom.c          | 8 ++++----
 arch/powerpc/mm/mem.c               | 2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index f612798e1c9..2b2420a4988 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
 extern unsigned int rtas_data;
 extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
+extern phys_addr_t memory_limit;
 extern unsigned long klimit;
 
 extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index d59e2b1bdcb..bb3d893a835 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -125,8 +125,8 @@ void __init reserve_crashkernel(void)
 	/* Crash kernel trumps memory limit */
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
-		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
-				memory_limit);
+		printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
+		       (unsigned long long)memory_limit);
 	}
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 5ec6a9e2393..ce01ff2474d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p)
 		return 1;
 
 	memory_limit = PAGE_ALIGN(memparse(p, &p));
-	DBG("memory limit = 0x%lx\n", memory_limit);
+	DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
 
 	return 0;
 }
@@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {}
 
 void __init early_init_devtree(void *params)
 {
-	unsigned long limit;
+	phys_addr_t limit;
 
 	DBG(" -> early_init_devtree(%p)\n", params);
 
@@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params)
 
 	limit = memory_limit;
 	if (! limit) {
-		unsigned long memsize;
+		phys_addr_t memsize;
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
@@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params)
 	lmb_analyze();
 	lmb_dump_all();
 
-	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f668fa9ba80..d0602a76bf7 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -57,7 +57,7 @@
 
 int init_bootmem_done;
 int mem_init_done;
-unsigned long memory_limit;
+phys_addr_t memory_limit;
 
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
-- 
GitLab


From 37cd8ed90fc5b11941110d2d0cea6807f86d4787 Mon Sep 17 00:00:00 2001
From: Gerhard Stenzel <stenzel@de.ibm.com>
Date: Wed, 13 May 2009 05:50:46 +0000
Subject: [PATCH 1391/1421] powerpc/cell: Make ptcal more reliable

There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.

Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.

We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.

Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/ras.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5f961c464cc..296b5268754 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 
 	area->nid = nid;
 	area->order = order;
-	area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+	area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
+					area->order);
 
-	if (!area->pages)
+	if (!area->pages) {
+		printk(KERN_WARNING "%s: no page on node %d\n",
+			__func__, area->nid);
 		goto out_free_area;
+	}
 
-	addr = __pa(page_address(area->pages));
+	/*
+	 * We move the ptcal area to the middle of the allocated
+	 * page, in order to avoid prefetches in memcpy and similar
+	 * functions stepping on it.
+	 */
+	addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1);
+	printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n",
+			__func__, area->nid, addr);
 
 	ret = -EIO;
 	if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
-- 
GitLab


From 951c4df5b7703137bf4eee002d98d083fbc890cc Mon Sep 17 00:00:00 2001
From: Benjamin Krill <ben@codiert.org>
Date: Wed, 13 May 2009 05:56:54 +0000
Subject: [PATCH 1392/1421] serial/nwpserial: Fix wrong register read address
 and add interrupt acknowledge.

The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/serial/nwpserial.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 32f3eaf0d26..9e150b19d72 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 		ch = dcr_read(up->dcr_host, UART_RX);
 		if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
 			tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	} while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+	} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
 
 	tty_flip_buffer_push(tty);
 	ret = IRQ_HANDLED;
 
+	/* clear interrupt */
+	dcr_write(up->dcr_host, UART_IIR, 1);
 out:
 	spin_unlock(&up->port.lock);
 	return ret;
-- 
GitLab


From b173f03d7c48d3346541f26e0b29690dbadca279 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 14 May 2009 18:34:06 +0000
Subject: [PATCH 1393/1421] powerpc/pseries: Really fix the oprofile CPU type
 on pseries

My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.

We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f9c40f869c6..3e33fb933d9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1836,7 +1836,7 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
 		 * and, in that case, keep the current value for
 		 * oprofile_cpu_type.
 		 */
-		if (old.oprofile_cpu_type == NULL) {
+		if (old.oprofile_cpu_type != NULL) {
 			t->oprofile_cpu_type = old.oprofile_cpu_type;
 			t->oprofile_type = old.oprofile_type;
 		}
-- 
GitLab


From ad892a63f64888a7b05eb2046febbcfbdd54dfcc Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 14 May 2009 20:16:47 +0000
Subject: [PATCH 1394/1421] powerpc: Fix PCI ROM access

A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.

First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).

Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.

This fixes this by doing these two things:

 - The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too

 - We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.

This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c | 21 ++++++++++++++-------
 arch/powerpc/kernel/pci_64.c     | 15 ++++++++++++---
 2 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 9c69e7e145c..4fee63cb53f 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass)
 
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < 6; idx++) {
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
 			r = &dev->resource[idx];
 			if (r->parent)		/* Already allocated */
 				continue;
 			if (!r->flags || (r->flags & IORESOURCE_UNSET))
 				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE )
+				disabled = 1;
 			if (r->flags & IORESOURCE_IO)
 				disabled = !(command & PCI_COMMAND_IO);
 			else
@@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass)
 		if (pass)
 			continue;
 		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags & IORESOURCE_ROM_ENABLE) {
+		if (r->flags) {
 			/* Turn the ROM off, leave the resource region,
 			 * but keep it unregistered.
 			 */
 			u32 reg;
-			pr_debug("PCI: Switching off ROM of %s\n",
-				 pci_name(dev));
-			r->flags &= ~IORESOURCE_ROM_ENABLE;
 			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			pci_write_config_dword(dev, dev->rom_base_reg,
-					       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
 		}
 	}
 }
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index be574fc0d92..96edb6f8bab 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 	return def;
 }
 
-static unsigned int pci_parse_of_flags(u32 addr0)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
 {
 	unsigned int flags = 0;
 
@@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0)
 		if (addr0 & 0x40000000)
 			flags |= IORESOURCE_PREFETCH
 				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+		/* Note: We don't know whether the ROM has been left enabled
+		 * by the firmware or not. We mark it as disabled (ie, we do
+		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+		 * do a config space read, it will be force-enabled if needed
+		 */
+		if (!bridge && (addr0 & 0xff) == 0x30)
+			flags |= IORESOURCE_READONLY;
 	} else if (addr0 & 0x01000000)
 		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	if (flags)
+		flags |= IORESOURCE_SIZEALIGN;
 	return flags;
 }
 
@@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
 		return;
 	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
 	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0]);
+		flags = pci_parse_of_flags(addrs[0], 0);
 		if (!flags)
 			continue;
 		base = of_read_number(&addrs[1], 2);
@@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
 	}
 	i = 1;
 	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0]);
+		flags = pci_parse_of_flags(ranges[0], 1);
 		size = of_read_number(&ranges[6], 2);
 		if (flags == 0 || size == 0)
 			continue;
-- 
GitLab


From 82075af6cb9b4918ab52a7100425b09fae6aafe3 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 14 May 2009 12:41:22 -0700
Subject: [PATCH 1395/1421] ASoC: davinci-pcm buildfixes

This is a buildfix for the DaVinci PCM code, resyncing it with
the version in the DaVinci tree.  The notable change is using
current EDMA interfaces, which recently merged to mainline.
(The older interfaces never made it into mainline.)

NOTE:  open issue, the DMA should be to/from SRAM; see chip
errata for more info.  The artifacts are extremely easy to
hear on DM355 hardware (not yet supported in mainline), but
don't seem as audible on DM6446 hardwaare (which does have
mainline support).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/davinci/davinci-pcm.c | 71 +++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 29 deletions(-)

diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 7af3b5b3a53..a0599658848 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -22,6 +22,7 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
+#include <mach/edma.h>
 
 #include "davinci-pcm.h"
 
@@ -51,7 +52,7 @@ struct davinci_runtime_data {
 	spinlock_t lock;
 	int period;		/* current DMA period */
 	int master_lch;		/* Master DMA channel */
-	int slave_lch;		/* Slave DMA channel */
+	int slave_lch;		/* linked parameter RAM reload slot */
 	struct davinci_pcm_dma_params *params;	/* DMA params */
 };
 
@@ -90,18 +91,18 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream)
 		dst_bidx = data_type;
 	}
 
-	davinci_set_dma_src_params(lch, src, INCR, W8BIT);
-	davinci_set_dma_dest_params(lch, dst, INCR, W8BIT);
-	davinci_set_dma_src_index(lch, src_bidx, 0);
-	davinci_set_dma_dest_index(lch, dst_bidx, 0);
-	davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+	edma_set_src(lch, src, INCR, W8BIT);
+	edma_set_dest(lch, dst, INCR, W8BIT);
+	edma_set_src_index(lch, src_bidx, 0);
+	edma_set_dest_index(lch, dst_bidx, 0);
+	edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
 
 	prtd->period++;
 	if (unlikely(prtd->period >= runtime->periods))
 		prtd->period = 0;
 }
 
-static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
 {
 	struct snd_pcm_substream *substream = data;
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
@@ -125,7 +126,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
-	int tcc = TCC_ANY;
+	struct edmacc_param p_ram;
 	int ret;
 
 	if (!dma_data)
@@ -134,22 +135,34 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	prtd->params = dma_data;
 
 	/* Request master DMA channel */
-	ret = davinci_request_dma(prtd->params->channel, prtd->params->name,
+	ret = edma_alloc_channel(prtd->params->channel,
 				  davinci_pcm_dma_irq, substream,
-				  &prtd->master_lch, &tcc, EVENTQ_0);
-	if (ret)
+				  EVENTQ_0);
+	if (ret < 0)
 		return ret;
+	prtd->master_lch = ret;
 
-	/* Request slave DMA channel */
-	ret = davinci_request_dma(PARAM_ANY, "Link",
-				  NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0);
-	if (ret) {
-		davinci_free_dma(prtd->master_lch);
+	/* Request parameter RAM reload slot */
+	ret = edma_alloc_slot(EDMA_SLOT_ANY);
+	if (ret < 0) {
+		edma_free_channel(prtd->master_lch);
 		return ret;
 	}
-
-	/* Link slave DMA channel in loopback */
-	davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch);
+	prtd->slave_lch = ret;
+
+	/* Issue transfer completion IRQ when the channel completes a
+	 * transfer, then always reload from the same slot (by a kind
+	 * of loopback link).  The completion IRQ handler will update
+	 * the reload slot with a new buffer.
+	 *
+	 * REVISIT save p_ram here after setting up everything except
+	 * the buffer and its length (ccnt) ... use it as a template
+	 * so davinci_pcm_enqueue_dma() takes less time in IRQ.
+	 */
+	edma_read_slot(prtd->slave_lch, &p_ram);
+	p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
+	p_ram.link_bcntrld = prtd->slave_lch << 5;
+	edma_write_slot(prtd->slave_lch, &p_ram);
 
 	return 0;
 }
@@ -165,12 +178,12 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		davinci_start_dma(prtd->master_lch);
+		edma_start(prtd->master_lch);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		davinci_stop_dma(prtd->master_lch);
+		edma_stop(prtd->master_lch);
 		break;
 	default:
 		ret = -EINVAL;
@@ -185,14 +198,14 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct paramentry_descriptor temp;
+	struct edmacc_param temp;
 
 	prtd->period = 0;
 	davinci_pcm_enqueue_dma(substream);
 
-	/* Get slave channel dma params for master channel startup */
-	davinci_get_dma_params(prtd->slave_lch, &temp);
-	davinci_set_dma_params(prtd->master_lch, &temp);
+	/* Copy self-linked parameter RAM entry into master channel */
+	edma_read_slot(prtd->slave_lch, &temp);
+	edma_write_slot(prtd->master_lch, &temp);
 
 	return 0;
 }
@@ -208,7 +221,7 @@ davinci_pcm_pointer(struct snd_pcm_substream *substream)
 
 	spin_lock(&prtd->lock);
 
-	davinci_dma_getposition(prtd->master_lch, &src, &dst);
+	edma_get_position(prtd->master_lch, &src, &dst);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		count = src - runtime->dma_addr;
 	else
@@ -253,10 +266,10 @@ static int davinci_pcm_close(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd = runtime->private_data;
 
-	davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch);
+	edma_unlink(prtd->slave_lch);
 
-	davinci_free_dma(prtd->slave_lch);
-	davinci_free_dma(prtd->master_lch);
+	edma_free_slot(prtd->slave_lch);
+	edma_free_channel(prtd->master_lch);
 
 	kfree(prtd);
 
-- 
GitLab


From a62114cb90a351016121bca02e69d6a9e24afa0e Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 14 May 2009 12:47:42 -0700
Subject: [PATCH 1396/1421] ASoC: DaVinci I2S updates

This resyncs the DaVinci I2S code with the version in the DaVinci
tree.  The behavioral change uses updated clock interfaces which
recently merged to mainline.  Two other changes include adding a
comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in
order to support more boards than just the DM644x EVM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/davinci/davinci-i2s.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index ffdb9439d3d..b1ea52fc83c 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -24,6 +24,26 @@
 
 #include "davinci-pcm.h"
 
+
+/*
+ * NOTE:  terminology here is confusing.
+ *
+ *  - This driver supports the "Audio Serial Port" (ASP),
+ *    found on dm6446, dm355, and other DaVinci chips.
+ *
+ *  - But it labels it a "Multi-channel Buffered Serial Port"
+ *    (McBSP) as on older chips like the dm642 ... which was
+ *    backward-compatible, possibly explaining that confusion.
+ *
+ *  - OMAP chips have a controller called McBSP, which is
+ *    incompatible with the DaVinci flavor of McBSP.
+ *
+ *  - Newer DaVinci chips have a controller called McASP,
+ *    incompatible with ASP and with either McBSP.
+ *
+ * In short:  this uses ASP to implement I2S, not McBSP.
+ * And it won't be the only DaVinci implemention of I2S.
+ */
 #define DAVINCI_MCBSP_DRR_REG	0x00
 #define DAVINCI_MCBSP_DXR_REG	0x04
 #define DAVINCI_MCBSP_SPCR_REG	0x08
@@ -421,7 +441,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+	struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
 	struct davinci_mcbsp_dev *dev;
 	struct resource *mem, *ioarea;
 	struct evm_snd_platform_data *pdata;
@@ -448,7 +468,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
 
 	cpu_dai->private_data = dev;
 
-	dev->clk = clk_get(&pdev->dev, "McBSPCLK");
+	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		ret = -ENODEV;
 		goto err_free_mem;
@@ -483,7 +503,7 @@ static void davinci_i2s_remove(struct platform_device *pdev,
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+	struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
 	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
 	struct resource *mem;
 
-- 
GitLab


From f492ec9f02908579353e31949855f86909a5af14 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 14 May 2009 13:01:59 -0700
Subject: [PATCH 1397/1421] ASoC: DaVinci EVM board support buildfixes

This is a build fix, resyncing the DaVinci EVM ASoC board code
with the version in the DaVinci tree.  That resync includes
support for the DM355 EVM, although that board isn't yet in
mainline.

(NOTE:  also includes a bugfix to the platform_add_resources
call, recently sent by Chaithrika U S <chaithrika@ti.com> but
not yet merged into the DaVinci tree.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-davinci/include/mach/asp.h | 25 ++++++++++
 sound/soc/davinci/Kconfig                |  7 +--
 sound/soc/davinci/davinci-evm.c          | 63 +++++++++++++++++++-----
 3 files changed, 81 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/mach-davinci/include/mach/asp.h

diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
new file mode 100644
index 00000000000..e0abc437d79
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index bd7392c9657..411a710be66 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -10,13 +10,14 @@ config SND_DAVINCI_SOC_I2S
 	tristate
 
 config SND_DAVINCI_SOC_EVM
-	tristate "SoC Audio support for DaVinci EVM"
-	depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM
+	tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+	depends on SND_DAVINCI_SOC
+	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
 	select SND_DAVINCI_SOC_I2S
 	select SND_SOC_TLV320AIC3X
 	help
 	  Say Y if you want to add support for SoC audio on TI
-	  DaVinci EVM platform.
+	  DaVinci DM6446 or DM355 EVM platforms.
 
 config SND_DAVINCI_SOC_SFFSDR
 	tristate "SoC Audio support for SFFSDR"
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 9b90b347007..58fd1cbedd8 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -20,7 +20,11 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/dma.h>
-#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/asp.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
 
 #include "../codecs/tlv320aic3x.h"
 #include "davinci-pcm.h"
@@ -150,7 +154,7 @@ static struct snd_soc_card snd_soc_card_evm = {
 
 /* evm audio private data */
 static struct aic3x_setup_data evm_aic3x_setup = {
-	.i2c_bus = 0,
+	.i2c_bus = 1,
 	.i2c_address = 0x1b,
 };
 
@@ -161,36 +165,73 @@ static struct snd_soc_device evm_snd_devdata = {
 	.codec_data = &evm_aic3x_setup,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
 static struct resource evm_snd_resources[] = {
 	{
-		.start = DAVINCI_MCBSP_BASE,
-		.end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+		.start = DAVINCI_ASP0_BASE,
+		.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
 
 static struct evm_snd_platform_data evm_snd_data = {
-	.tx_dma_ch	= DM644X_DMACH_MCBSP_TX,
-	.rx_dma_ch	= DM644X_DMACH_MCBSP_RX,
+	.tx_dma_ch	= DAVINCI_DMA_ASP0_TX,
+	.rx_dma_ch	= DAVINCI_DMA_ASP0_RX,
+};
+
+/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+static struct resource dm335evm_snd_resources[] = {
+	{
+		.start = DAVINCI_ASP1_BASE,
+		.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct evm_snd_platform_data dm335evm_snd_data = {
+	.tx_dma_ch	= DAVINCI_DMA_ASP1_TX,
+	.rx_dma_ch	= DAVINCI_DMA_ASP1_RX,
 };
 
 static struct platform_device *evm_snd_device;
 
 static int __init evm_init(void)
 {
+	struct resource *resources;
+	unsigned num_resources;
+	struct evm_snd_platform_data *data;
+	int index;
 	int ret;
 
-	evm_snd_device = platform_device_alloc("soc-audio", 0);
+	if (machine_is_davinci_evm()) {
+		davinci_cfg_reg(DM644X_MCBSP);
+
+		resources = evm_snd_resources;
+		num_resources = ARRAY_SIZE(evm_snd_resources);
+		data = &evm_snd_data;
+		index = 0;
+	} else if (machine_is_davinci_dm355_evm()) {
+		/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+		resources = dm335evm_snd_resources;
+		num_resources = ARRAY_SIZE(dm335evm_snd_resources);
+		data = &dm335evm_snd_data;
+		index = 1;
+	} else
+		return -EINVAL;
+
+	evm_snd_device = platform_device_alloc("soc-audio", index);
 	if (!evm_snd_device)
 		return -ENOMEM;
 
 	platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
 	evm_snd_devdata.dev = &evm_snd_device->dev;
-	platform_device_add_data(evm_snd_device, &evm_snd_data,
-				 sizeof(evm_snd_data));
+	platform_device_add_data(evm_snd_device, data, sizeof(*data));
 
-	ret = platform_device_add_resources(evm_snd_device, evm_snd_resources,
-					    ARRAY_SIZE(evm_snd_resources));
+	ret = platform_device_add_resources(evm_snd_device, resources,
+			num_resources);
 	if (ret) {
 		platform_device_put(evm_snd_device);
 		return ret;
-- 
GitLab


From cd17cbfda004fe5f406c01b318c6378d9895896f Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Fri, 15 May 2009 11:32:24 +0200
Subject: [PATCH 1398/1421] Revert "mm: add /proc controls for pdflush threads"

This reverts commit fafd688e4c0c34da0f3de909881117d374e4c7af.

Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 Documentation/sysctl/vm.txt | 28 ----------------------------
 include/linux/writeback.h   |  2 --
 kernel/sysctl.c             | 23 -----------------------
 mm/pdflush.c                | 31 ++++++++++++-------------------
 4 files changed, 12 insertions(+), 72 deletions(-)

diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index b716d33912d..c302ddf629a 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 9c1ed1fb6dd..93445477f86 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -168,8 +168,6 @@ void writeback_set_ratelimit(void);
 /* pdflush.c */
 extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
 				   read-only. */
-extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
-extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
 
 
 #endif		/* WRITEBACK_H */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ea78fa101ad..b2970d56fb7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -101,7 +101,6 @@ static int __maybe_unused one = 1;
 static int __maybe_unused two = 2;
 static unsigned long one_ul = 1;
 static int one_hundred = 100;
-static int one_thousand = 1000;
 
 /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
 static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
@@ -1033,28 +1032,6 @@ static struct ctl_table vm_table[] = {
 		.mode		= 0444 /* read-only*/,
 		.proc_handler	= &proc_dointvec,
 	},
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "nr_pdflush_threads_min",
-		.data		= &nr_pdflush_threads_min,
-		.maxlen		= sizeof nr_pdflush_threads_min,
-		.mode		= 0644 /* read-write */,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
-		.extra1		= &one,
-		.extra2		= &nr_pdflush_threads_max,
-	},
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "nr_pdflush_threads_max",
-		.data		= &nr_pdflush_threads_max,
-		.maxlen		= sizeof nr_pdflush_threads_max,
-		.mode		= 0644 /* read-write */,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
-		.extra1		= &nr_pdflush_threads_min,
-		.extra2		= &one_thousand,
-	},
 	{
 		.ctl_name	= VM_SWAPPINESS,
 		.procname	= "swappiness",
diff --git a/mm/pdflush.c b/mm/pdflush.c
index f2caf96993f..235ac440c44 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -57,14 +57,6 @@ static DEFINE_SPINLOCK(pdflush_lock);
  */
 int nr_pdflush_threads = 0;
 
-/*
- * The max/min number of pdflush threads. R/W by sysctl at
- * /proc/sys/vm/nr_pdflush_threads_max/min
- */
-int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
-int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
-
-
 /*
  * The time at which the pdflush thread pool last went empty
  */
@@ -76,7 +68,7 @@ static unsigned long last_empty_jifs;
  * Thread pool management algorithm:
  * 
  * - The minimum and maximum number of pdflush instances are bound
- *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
+ *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
  * 
  * - If there have been no idle pdflush instances for 1 second, create
  *   a new one.
@@ -142,13 +134,14 @@ static int __pdflush(struct pdflush_work *my_work)
 		 * To throttle creation, we reset last_empty_jifs.
 		 */
 		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
-			if (list_empty(&pdflush_list) &&
-			    nr_pdflush_threads < nr_pdflush_threads_max) {
-				last_empty_jifs = jiffies;
-				nr_pdflush_threads++;
-				spin_unlock_irq(&pdflush_lock);
-				start_one_pdflush_thread();
-				spin_lock_irq(&pdflush_lock);
+			if (list_empty(&pdflush_list)) {
+				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+					last_empty_jifs = jiffies;
+					nr_pdflush_threads++;
+					spin_unlock_irq(&pdflush_lock);
+					start_one_pdflush_thread();
+					spin_lock_irq(&pdflush_lock);
+				}
 			}
 		}
 
@@ -160,7 +153,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (list_empty(&pdflush_list))
 			continue;
-		if (nr_pdflush_threads <= nr_pdflush_threads_min)
+		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
 		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
@@ -266,9 +259,9 @@ static int __init pdflush_init(void)
 	 * Pre-set nr_pdflush_threads...  If we fail to create,
 	 * the count will be decremented.
 	 */
-	nr_pdflush_threads = nr_pdflush_threads_min;
+	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
 
-	for (i = 0; i < nr_pdflush_threads_min; i++)
+	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
 		start_one_pdflush_thread();
 	return 0;
 }
-- 
GitLab


From 364b5b7b1d793a7f98be55b6b154716dcae78dfc Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 13 May 2009 21:56:59 -0500
Subject: [PATCH 1399/1421] sysrq, intel_fb: fix sysrq g collision

Commit 79e539453b34e35f39299a899d263b0a1f1670bd introduced a
regression where you cannot use sysrq 'g' to enter kgdb.  The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics.  The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.

This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/char/sysrq.c            | 4 ++--
 drivers/gpu/drm/i915/intel_fb.c | 4 ++--
 kernel/kgdb.c                   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index b0a6a3e5192..d6a807f4077 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -406,7 +406,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_showlocks_op,		/* d */
 	&sysrq_term_op,			/* e */
 	&sysrq_moom_op,			/* f */
-	/* g: May be registered by ppc for kgdb */
+	/* g: May be registered for the kernel debugger */
 	NULL,				/* g */
 	NULL,				/* h - reserved for help */
 	&sysrq_kill_op,			/* i */
@@ -431,7 +431,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_sync_op,			/* s */
 	&sysrq_showstate_op,		/* t */
 	&sysrq_mountro_op,		/* u */
-	/* v: May be registered at init time by SMP VOYAGER */
+	/* v: May be registered for frame buffer console restore */
 	NULL,				/* v */
 	&sysrq_showstate_blocked_op,	/* w */
 	/* x: May be registered on ppc/powerpc for xmon */
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 3e094beecb9..e4652dcdd9b 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -864,7 +864,7 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
 
 static struct sysrq_key_op sysrq_intelfb_restore_op = {
         .handler = intelfb_sysrq,
-        .help_msg = "force-fb(G)",
+        .help_msg = "force-fb(V)",
         .action_msg = "Restore framebuffer console",
 };
 
@@ -898,7 +898,7 @@ int intelfb_probe(struct drm_device *dev)
 		ret = intelfb_single_fb_probe(dev);
 	}
 
-	register_sysrq_key('g', &sysrq_intelfb_restore_op);
+	register_sysrq_key('v', &sysrq_intelfb_restore_op);
 
 	return ret;
 }
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index e4dcfb2272a..9147a3190c9 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -1583,8 +1583,8 @@ static void sysrq_handle_gdb(int key, struct tty_struct *tty)
 
 static struct sysrq_key_op sysrq_gdb_op = {
 	.handler	= sysrq_handle_gdb,
-	.help_msg	= "Gdb",
-	.action_msg	= "GDB",
+	.help_msg	= "debug(G)",
+	.action_msg	= "DEBUG",
 };
 #endif
 
-- 
GitLab


From 33ab1979bc9f719213bc3f392c8fd9d012e4f4e9 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 11 Feb 2009 18:46:32 -0600
Subject: [PATCH 1400/1421] kgdb,i386: use address that SP register points to
 in the exception frame

The treatment of the SP register is different on x86_64 and i386.
This is a regression fix that lived outside the mainline kernel from
2.6.27 to now.  The regression was a result of the original merge
consolidation of the i386 and x86_64 archs to x86.

The incorrectly reported SP on i386 prevented stack tracebacks from
working correctly in gdb.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 arch/x86/kernel/kgdb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index eedfaebe106..b1f4dffb919 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -88,6 +88,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_SS]	= __KERNEL_DS;
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
+	gdb_regs[GDB_SP]	= (int)&regs->sp;
 #else
 	gdb_regs[GDB_R8]	= regs->r8;
 	gdb_regs[GDB_R9]	= regs->r9;
@@ -100,8 +101,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs32[GDB_PS]	= regs->flags;
 	gdb_regs32[GDB_CS]	= regs->cs;
 	gdb_regs32[GDB_SS]	= regs->ss;
-#endif
 	gdb_regs[GDB_SP]	= regs->sp;
+#endif
 }
 
 /**
-- 
GitLab


From d34a792da969a00b0f653c512414411760f55a20 Mon Sep 17 00:00:00 2001
From: Frank Rowand <frank.rowand@am.sony.com>
Date: Fri, 15 May 2009 07:56:25 -0500
Subject: [PATCH 1401/1421] kgdb: gdb documentation fix

gdb command "set remote debug 1" is not valid, change to correct command.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 Documentation/DocBook/kgdb.tmpl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 372dec20c8d..5cff41a5fa7 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">
-- 
GitLab


From 2ec0ae3acec47f628179ee95fe2c4da01b5e9fc4 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Fri, 15 May 2009 09:07:28 -0400
Subject: [PATCH 1402/1421] ext4: Fix race in ext4_inode_info.i_cached_extent

If two CPU's simultaneously call ext4_ext_get_blocks() at the same
time, there is nothing protecting the i_cached_extent structure from
being used and updated at the same time.  This could potentially cause
the wrong location on disk to be read or written to, including
potentially causing the corruption of the block group descriptors
and/or inode table.

This bug has been in the ext4 code since almost the very beginning of
ext4's development.  Fortunately once the data is stored in the page
cache cache, ext4_get_blocks() doesn't need to be called, so trying to
replicate this problem to the point where we could identify its root
cause was *extremely* difficult.  Many thanks to Kevin Shanahan for
working over several months to be able to reproduce this easily so we
could finally nail down the cause of the corruption.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
---
 fs/ext4/extents.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 172656c2a3b..e3a55eb8b26 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1841,11 +1841,13 @@ ext4_ext_put_in_cache(struct inode *inode, ext4_lblk_t block,
 {
 	struct ext4_ext_cache *cex;
 	BUG_ON(len == 0);
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
 	cex = &EXT4_I(inode)->i_cached_extent;
 	cex->ec_type = type;
 	cex->ec_block = block;
 	cex->ec_len = len;
 	cex->ec_start = start;
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 }
 
 /*
@@ -1902,12 +1904,17 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
 			struct ext4_extent *ex)
 {
 	struct ext4_ext_cache *cex;
+	int ret = EXT4_EXT_CACHE_NO;
 
+	/* 
+	 * We borrow i_block_reservation_lock to protect i_cached_extent
+	 */
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
 	cex = &EXT4_I(inode)->i_cached_extent;
 
 	/* has cache valid data? */
 	if (cex->ec_type == EXT4_EXT_CACHE_NO)
-		return EXT4_EXT_CACHE_NO;
+		goto errout;
 
 	BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP &&
 			cex->ec_type != EXT4_EXT_CACHE_EXTENT);
@@ -1918,11 +1925,11 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
 		ext_debug("%u cached by %u:%u:%llu\n",
 				block,
 				cex->ec_block, cex->ec_len, cex->ec_start);
-		return cex->ec_type;
+		ret = cex->ec_type;
 	}
-
-	/* not in cache */
-	return EXT4_EXT_CACHE_NO;
+errout:
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+	return ret;
 }
 
 /*
-- 
GitLab


From 1f71ebedb3f8ce9108978168759c8551d873a912 Mon Sep 17 00:00:00 2001
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Date: Thu, 14 May 2009 19:38:24 -0700
Subject: [PATCH 1403/1421] devpts: correctly set default options

devpts_get_sb() calls memset(0) to clear mount options and calls
parse_mount_options() if user specified any mount options.

The memset(0) is bogus since the 'mode' and 'ptmxmode' options are
non-zero by default.  parse_mount_options() restores options to default
anyway and can properly deal with NULL mount options.

So in devpts_get_sb() remove memset(0) and call parse_mount_options() even
for NULL mount options.

Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Eric Paris <eparis@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/devpts/inode.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 21165cf934f..c68edb96944 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -90,6 +90,15 @@ static inline struct super_block *pts_sb_from_inode(struct inode *inode)
 #define PARSE_MOUNT	0
 #define PARSE_REMOUNT	1
 
+/*
+ * parse_mount_options():
+ * 	Set @opts to mount options specified in @data. If an option is not
+ * 	specified in @data, set it to its default value. The exception is
+ * 	'newinstance' option which can only be set/cleared on a mount (i.e.
+ * 	cannot be changed during remount).
+ *
+ * Note: @data may be NULL (in which case all options are set to default).
+ */
 static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts)
 {
 	char *p;
@@ -355,12 +364,9 @@ static int devpts_get_sb(struct file_system_type *fs_type,
 	struct pts_mount_opts opts;
 	struct super_block *s;
 
-	memset(&opts, 0, sizeof(opts));
-	if (data) {
-		error = parse_mount_options(data, PARSE_MOUNT, &opts);
-		if (error)
-			return error;
-	}
+	error = parse_mount_options(data, PARSE_MOUNT, &opts);
+	if (error)
+		return error;
 
 	if (opts.newinstance)
 		s = sget(fs_type, NULL, set_anon_super, NULL);
-- 
GitLab


From 67651ee5710c45ea62fae68b768d65395ccf47c2 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Wed, 8 Apr 2009 16:02:18 -0400
Subject: [PATCH 1404/1421] [libata] sata_sx4: convert to new exception
 handling methods

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_sx4.c | 166 ++++++++++++++++++++++++++++++-----------
 1 file changed, 121 insertions(+), 45 deletions(-)

diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index dce3dccced3..1ce98afa69b 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -213,8 +213,9 @@ struct pdc_host_priv {
 
 
 static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
+static void pdc_freeze(struct ata_port *ap);
+static void pdc_thaw(struct ata_port *ap);
 static int pdc_port_start(struct ata_port *ap);
 static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -233,6 +234,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host,
 				 void *psource, u32 offset, u32 size);
 static void pdc20621_irq_clear(struct ata_port *ap);
 static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+			 unsigned long deadline);
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
 
 
 static struct scsi_host_template pdc_sata_sht = {
@@ -243,20 +248,24 @@ static struct scsi_host_template pdc_sata_sht = {
 
 /* TODO: inherit from base port_ops after converting to new EH */
 static struct ata_port_operations pdc_20621_ops = {
-	.sff_tf_load		= pdc_tf_load_mmio,
-	.sff_tf_read		= ata_sff_tf_read,
-	.sff_check_status	= ata_sff_check_status,
-	.sff_exec_command	= pdc_exec_command_mmio,
-	.sff_dev_select		= ata_sff_dev_select,
-	.phy_reset		= pdc_20621_phy_reset,
+	.inherits		= &ata_sff_port_ops,
+
+	.check_atapi_dma	= pdc_check_atapi_dma,
 	.qc_prep		= pdc20621_qc_prep,
 	.qc_issue		= pdc20621_qc_issue,
-	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
-	.sff_data_xfer		= ata_sff_data_xfer,
-	.eng_timeout		= pdc_eng_timeout,
-	.sff_irq_clear		= pdc20621_irq_clear,
-	.sff_irq_on		= ata_sff_irq_on,
+
+	.freeze			= pdc_freeze,
+	.thaw			= pdc_thaw,
+	.softreset		= pdc_softreset,
+	.error_handler		= pdc_error_handler,
+	.lost_interrupt		= ATA_OP_NULL,
+	.post_internal_cmd	= pdc_post_internal_cmd,
+
 	.port_start		= pdc_port_start,
+
+	.sff_tf_load		= pdc_tf_load_mmio,
+	.sff_exec_command	= pdc_exec_command_mmio,
+	.sff_irq_clear		= pdc20621_irq_clear,
 };
 
 static const struct ata_port_info pdc_port_info[] = {
@@ -310,14 +319,6 @@ static int pdc_port_start(struct ata_port *ap)
 	return 0;
 }
 
-static void pdc_20621_phy_reset(struct ata_port *ap)
-{
-	VPRINTK("ENTER\n");
-	ap->cbl = ATA_CBL_SATA;
-	ata_port_probe(ap);
-	ata_bus_reset(ap);
-}
-
 static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
 				   unsigned int portno,
 					   unsigned int total_len)
@@ -859,40 +860,115 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
 	return IRQ_RETVAL(handled);
 }
 
-static void pdc_eng_timeout(struct ata_port *ap)
+static void pdc_freeze(struct ata_port *ap)
 {
-	u8 drv_stat;
-	struct ata_host *host = ap->host;
-	struct ata_queued_cmd *qc;
-	unsigned long flags;
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
+	u32 tmp;
 
-	DPRINTK("ENTER\n");
+	/* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
 
-	spin_lock_irqsave(&host->lock, flags);
+	tmp = readl(mmio + PDC_CTLSTAT);
+	tmp |= PDC_MASK_INT;
+	tmp &= ~PDC_DMA_ENABLE;
+	writel(tmp, mmio + PDC_CTLSTAT);
+	readl(mmio + PDC_CTLSTAT); /* flush */
+}
 
-	qc = ata_qc_from_tag(ap, ap->link.active_tag);
+static void pdc_thaw(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
+	void __iomem *mmio_base;
+	u32 tmp;
 
-	switch (qc->tf.protocol) {
-	case ATA_PROT_DMA:
-	case ATA_PROT_NODATA:
-		ata_port_printk(ap, KERN_ERR, "command timeout\n");
-		qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
-		break;
+	/* FIXME: start HDMA engine, if zero ATA engines running */
 
-	default:
-		drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+	/* reading SEQ mask register clears IRQ */
+	mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+	readl(mmio_base + PDC_20621_SEQMASK);
 
-		ata_port_printk(ap, KERN_ERR,
-				"unknown timeout, cmd 0x%x stat 0x%x\n",
-				qc->tf.command, drv_stat);
+	/* turn IRQ back on */
+	tmp = readl(mmio + PDC_CTLSTAT);
+	tmp &= ~PDC_MASK_INT;
+	writel(tmp, mmio + PDC_CTLSTAT);
+	readl(mmio + PDC_CTLSTAT); /* flush */
+}
 
-		qc->err_mask |= ac_err_mask(drv_stat);
-		break;
+static void pdc_reset_port(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+	unsigned int i;
+	u32 tmp;
+
+	/* FIXME: handle HDMA copy engine */
+
+	for (i = 11; i > 0; i--) {
+		tmp = readl(mmio);
+		if (tmp & PDC_RESET)
+			break;
+
+		udelay(100);
+
+		tmp |= PDC_RESET;
+		writel(tmp, mmio);
 	}
 
-	spin_unlock_irqrestore(&host->lock, flags);
-	ata_eh_qc_complete(qc);
-	DPRINTK("EXIT\n");
+	tmp &= ~PDC_RESET;
+	writel(tmp, mmio);
+	readl(mmio);	/* flush */
+}
+
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+			 unsigned long deadline)
+{
+	pdc_reset_port(link->ap);
+	return ata_sff_softreset(link, class, deadline);
+}
+
+static void pdc_error_handler(struct ata_port *ap)
+{
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		pdc_reset_port(ap);
+
+	ata_std_error_handler(ap);
+}
+
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	/* make DMA engine forget about the failed command */
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		pdc_reset_port(ap);
+}
+
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	u8 *scsicmd = qc->scsicmd->cmnd;
+	int pio = 1; /* atapi dma off by default */
+
+	/* Whitelist commands that may use DMA. */
+	switch (scsicmd[0]) {
+	case WRITE_12:
+	case WRITE_10:
+	case WRITE_6:
+	case READ_12:
+	case READ_10:
+	case READ_6:
+	case 0xad: /* READ_DVD_STRUCTURE */
+	case 0xbe: /* READ_CD */
+		pio = 0;
+	}
+	/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+	if (scsicmd[0] == WRITE_10) {
+		unsigned int lba =
+			(scsicmd[2] << 24) |
+			(scsicmd[3] << 16) |
+			(scsicmd[4] << 8) |
+			scsicmd[5];
+		if (lba >= 0xFFFF4FA2)
+			pio = 1;
+	}
+	return pio;
 }
 
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
-- 
GitLab


From 19799bfc5da476ad72eecc5f0f9018c5d351cbd5 Mon Sep 17 00:00:00 2001
From: David Milburn <dmilburn@redhat.com>
Date: Wed, 13 May 2009 18:02:21 -0500
Subject: [PATCH 1405/1421] [libata] sata_sx4: fixup interrupt handling

Issuing ATA_CMD_SET_FEATURES (0xef) times out because
pdc20621_interrupt ignores command completion since
ATA_TFLAG_POLLING flag is set.

This has already been fixed for sata_promise:

commit 51b94d2a5a90d4800e74d7348bcde098a28f4fb3
Author: Tejun Heo <htejun@gmail.com>
Date:   Fri Jun 8 13:46:55 2007 -0700

    sata_promise: use TF interface for polling NODATA commands

Also, this patch includes Mikael's original patches:

http://marc.info/?l=linux-ide&m=121135828227724&w=2
http://marc.info/?l=linux-ide&m=121144512109826&w=2

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_sx4.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 1ce98afa69b..eb05a3c82a9 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -687,8 +687,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
 static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
 {
 	switch (qc->tf.protocol) {
-	case ATA_PROT_DMA:
 	case ATA_PROT_NODATA:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			break;
+		/*FALLTHROUGH*/
+	case ATA_PROT_DMA:
 		pdc20621_packet_start(qc);
 		return 0;
 
@@ -787,12 +790,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
 
 static void pdc20621_irq_clear(struct ata_port *ap)
 {
-	struct ata_host *host = ap->host;
-	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
-
-	mmio += PDC_CHIP0_OFS;
-
-	readl(mmio + PDC_20621_SEQMASK);
+	ioread8(ap->ioaddr.status_addr);
 }
 
 static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
@@ -877,14 +875,12 @@ static void pdc_freeze(struct ata_port *ap)
 static void pdc_thaw(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.cmd_addr;
-	void __iomem *mmio_base;
 	u32 tmp;
 
 	/* FIXME: start HDMA engine, if zero ATA engines running */
 
-	/* reading SEQ mask register clears IRQ */
-	mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
-	readl(mmio_base + PDC_20621_SEQMASK);
+	/* clear IRQ */
+	ioread8(ap->ioaddr.status_addr);
 
 	/* turn IRQ back on */
 	tmp = readl(mmio + PDC_CTLSTAT);
@@ -974,7 +970,7 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
-		tf->protocol == ATA_PROT_NODATA);
+		tf->protocol == ATAPI_PROT_DMA);
 	ata_sff_tf_load(ap, tf);
 }
 
@@ -982,7 +978,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
-		tf->protocol == ATA_PROT_NODATA);
+		tf->protocol == ATAPI_PROT_DMA);
 	ata_sff_exec_command(ap, tf);
 }
 
-- 
GitLab


From f48c019f1550aea7a3a1227efb9901916f5cd30d Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 22:10:50 -0500
Subject: [PATCH 1406/1421] sata_fsl: Fix compile warnings

We we build with dma_addr_t as a 64-bit quantity we get:

drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg':
drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_fsl.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index c2e90e1fece..5edd6549876 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -332,13 +332,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
 		dma_addr_t sg_addr = sg_dma_address(sg);
 		u32 sg_len = sg_dma_len(sg);
 
-		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
-			sg_addr, sg_len);
+		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+			(unsigned long long)sg_addr, sg_len);
 
 		/* warn if each s/g element is not dword aligned */
 		if (sg_addr & 0x03)
 			ata_port_printk(qc->ap, KERN_ERR,
-					"s/g addr unaligned : 0x%x\n", sg_addr);
+					"s/g addr unaligned : 0x%llx\n",
+					(unsigned long long)sg_addr);
 		if (sg_len & 0x03)
 			ata_port_printk(qc->ap, KERN_ERR,
 					"s/g len unaligned : 0x%x\n", sg_len);
-- 
GitLab


From d358724385d9bb3e360f5b95c17ec4f77c913460 Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Thu, 14 May 2009 09:47:07 -0500
Subject: [PATCH 1407/1421] sata_fsl: Fix the command description of FSL SATA
 controller

The bit 11 of command description is reserved bit in Freescale
SATA controller and needs to be set to '1'.  This is needed to
make sure the last write from the controller to the buffer
descriptor is seen before an interrupt is raised.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_fsl.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 5edd6549876..36b8629203b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry {
  * Description information bitdefs
  */
 enum {
+	CMD_DESC_RES = (1 << 11),
 	VENDOR_SPECIFIC_BIST = (1 << 10),
 	CMD_DESC_SNOOP_ENABLE = (1 << 9),
 	FPDMA_QUEUED_CMD = (1 << 8),
@@ -388,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
 	void __iomem *hcr_base = host_priv->hcr_base;
 	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
 	struct command_desc *cd;
-	u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+	u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
 	u32 num_prde = 0;
 	u32 ttl_dwords = 0;
 	dma_addr_t cd_paddr;
@@ -841,7 +842,7 @@ issue_srst:
 
 	/* device reset/SRST is a control register update FIS, uses tag0 */
 	sata_fsl_setup_cmd_hdr_entry(pp, 0,
-				     SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+		SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
 
 	tf.ctl |= ATA_SRST;	/* setup SRST bit in taskfile control reg */
 	ata_tf_to_fis(&tf, pmp, 0, cfis);
@@ -887,7 +888,8 @@ issue_srst:
 	 * using ATA signature D2H register FIS to the host controller.
 	 */
 
-	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+				      0, 0, 5);
 
 	tf.ctl &= ~ATA_SRST;	/* 2nd H2D Ctl. register FIS */
 	ata_tf_to_fis(&tf, pmp, 0, cfis);
-- 
GitLab


From 61d79a8eb362f826a002d3d14c4f9a070a818542 Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Fri, 15 May 2009 00:40:34 -0400
Subject: [PATCH 1408/1421] libata: Report disk alignment and physical block
 size

For disks with 4KB sectors, report the correct block size and alignment
when filling out the READ CAPACITY(16) response.

This patch is based upon code from Matthew Wilcox' 4KB ATA tree.  I
fixed the bug I reported a while back caused by ATA and SCSI using
different approaches to describing the alignment.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 68d9132d8f6..d1718a1f278 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2376,7 +2376,23 @@ saving_not_supp:
  */
 static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 {
-	u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
+	struct ata_device *dev = args->dev;
+	u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+	u8 log_per_phys = 0;
+	u16 lowest_aligned = 0;
+	u16 word_106 = dev->id[106];
+	u16 word_209 = dev->id[209];
+
+	if ((word_106 & 0xc000) == 0x4000) {
+		/* Number and offset of logical sectors per physical sector */
+		if (word_106 & (1 << 13))
+			log_per_phys = word_106 & 0xf;
+		if ((word_209 & 0xc000) == 0x4000) {
+			u16 first = dev->id[209] & 0x3fff;
+			if (first > 0)
+				lowest_aligned = (1 << log_per_phys) - first;
+		}
+	}
 
 	VPRINTK("ENTER\n");
 
@@ -2407,6 +2423,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 		/* sector size */
 		rbuf[10] = ATA_SECT_SIZE >> 8;
 		rbuf[11] = ATA_SECT_SIZE & 0xff;
+
+		rbuf[12] = 0;
+		rbuf[13] = log_per_phys;
+		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+		rbuf[15] = lowest_aligned;
 	}
 
 	return 0;
-- 
GitLab


From 4bca3286433585b5f1c3e7d8ac37a2f4b3def9ca Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Fri, 15 May 2009 00:40:35 -0400
Subject: [PATCH 1409/1421] libata: Media rotation rate and form factor
 heuristics

This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.

The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard.  Only then are the
characteristics reported to SCSI via the VPD B1 page.

This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever.  With no complaints so far.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 11 ++++++-----
 include/linux/ata.h       | 28 ++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d1718a1f278..342316064e9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
 
 static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
 {
+	int form_factor = ata_id_form_factor(args->id);
+	int media_rotation_rate = ata_id_rotation_rate(args->id);
+
 	rbuf[1] = 0xb1;
 	rbuf[3] = 0x3c;
-	if (ata_id_major_version(args->id) > 7) {
-		rbuf[4] = args->id[217] >> 8;
-		rbuf[5] = args->id[217];
-		rbuf[7] = args->id[168] & 0xf;
-	}
+	rbuf[4] = media_rotation_rate >> 8;
+	rbuf[5] = media_rotation_rate;
+	rbuf[7] = form_factor;
 
 	return 0;
 }
diff --git a/include/linux/ata.h b/include/linux/ata.h
index cb79b7a208e..915da43edee 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -730,6 +730,34 @@ static inline int ata_id_has_unload(const u16 *id)
 	return 0;
 }
 
+static inline int ata_id_form_factor(const u16 *id)
+{
+	u16 val = id[168];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	val &= 0xf;
+
+	if (val > 5)
+		return 0;
+
+	return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+	u16 val = id[217];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	if (val > 1 && val < 0x401)
+		return 0;
+
+	return val;
+}
+
 static inline int ata_id_has_trim(const u16 *id)
 {
 	if (ata_id_major_version(id) >= 7 &&
-- 
GitLab


From 975b3c474c13d29337eaf7da8f5f5c0299e4943f Mon Sep 17 00:00:00 2001
From: Lin Ming <ming.m.lin@intel.com>
Date: Fri, 15 May 2009 22:27:49 -0400
Subject: [PATCH 1410/1421] ACPI: resume: re-enable SCI-enable workaround

The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.

(The BIOS is supposed to update SCI_EN, not the OS)

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/aclocal.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 772ee5c4ccc..2ec394a328e 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -787,7 +787,12 @@ struct acpi_bit_register_info {
 
 /* For control registers, both ignored and reserved bits must be preserved */
 
-#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0201	/* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bits 9 */
 #define ACPI_PM1_CONTROL_RESERVED_BITS          0xC1F8	/* Bits 14-15, 3-8 */
 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
 	       (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
-- 
GitLab


From 815ab0fd40579ad2aa42058298073503648762b9 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 7 May 2009 22:19:45 -0400
Subject: [PATCH 1411/1421] ACPI: suspend: restore BM_RLD on resume

In 2.6.29,
31878dd86b7df9a147f5e6cc6e07092b4308782b
"ACPI: remove BM_RLD access from idle entry path"
moved BM_RLD initialization to init-time from run time.

But we discovered that some BIOS do not restore BM_RLD
after suspend, causing device errors on C3 and C4
after resume.  So now the kernel restores BM_RLD.

http://bugzilla.kernel.org/show_bug.cgi?id=13032

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..c1d59cfdb5f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -202,15 +202,38 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
  * Suspend / resume control
  */
 static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+	u32 resumed_bm_rld;
+
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+	if (resumed_bm_rld != saved_bm_rld)
+		acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
+	if (acpi_idle_suspend == 1)
+		return 0;
+
+	acpi_idle_bm_rld_save();
 	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
+	if (acpi_idle_suspend == 0)
+		return 0;
+
+	acpi_idle_bm_rld_restore();
 	acpi_idle_suspend = 0;
 	return 0;
 }
-- 
GitLab


From ecb4aed78dcf09e48c8c34c8c2fa7f5c69344be6 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 24 Apr 2009 11:33:47 -0400
Subject: [PATCH 1412/1421] ACPI, i915: build fix

drivers/built-in.o: In function `intel_opregion_init':
(.text+0x9d540): undefined reference to `acpi_video_register'

http://bugzilla.kernel.org/show_bug.cgi?id=13165

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/gpu/drm/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3a22eb9be37..f33d2527991 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -83,6 +83,12 @@ config DRM_I915
 config DRM_I915_KMS
 	bool "Enable modesetting on intel by default"
 	depends on DRM_I915
+	# i915 KMS depends on ACPI_VIDEO when ACPI is enabled
+	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select VIDEO_OUTPUT_CONTROL if ACPI
+	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select INPUT if ACPI
+	select ACPI_VIDEO if ACPI
 	help
 	  Choose this option if you want kernel modesetting enabled by default,
 	  and you have a new enough userspace to support this. Running old
-- 
GitLab


From 56c213fa012f2bad9eff908292ff2500f840b020 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 11 May 2009 09:35:57 +0800
Subject: [PATCH 1413/1421] ACPI processor: introduce module parameter
 processor.ignore_tpc

Introduce module parameter processor.ignore_tpc.

Some laptops are shipped with buggy _TPC,
this module parameter is used to to disable the buggy support.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_throttling.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index d0d1f4d5043..5f09fb8c0e0 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -45,6 +45,14 @@
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_throttling");
 
+/* ignore_tpc:
+ *  0 -> acpi processor driver doesn't ignore _TPC values
+ *  1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
 struct throttling_tstate {
 	unsigned int cpu;		/* cpu nr */
 	int target_state;		/* target T-state */
@@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 
 	if (!pr)
 		return -EINVAL;
+
+	if (ignore_tpc)
+		goto end;
+
 	status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
 	if (ACPI_FAILURE(status)) {
 		if (status != AE_NOT_FOUND) {
@@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		}
 		return -ENODEV;
 	}
+
+end:
 	pr->throttling_platform_limit = (int)tpc;
 	return 0;
 }
@@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
 	struct acpi_processor_limit *limit;
 	int target_state;
 
+	if (ignore_tpc)
+		return 0;
+
 	result = acpi_processor_get_platform_limit(pr);
 	if (result) {
 		/* Throttling Limit is unsupported */
-- 
GitLab


From 4973b22aa8c70fe036e3e0039f104cf5bb7fe2b1 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 11 May 2009 09:36:01 +0800
Subject: [PATCH 1414/1421] ACPI processor: reset the throttling state once
 it's invalid

If the BIOS hands us an invalid throttling state,
write a valid state.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_throttling.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 5f09fb8c0e0..7f16f5f8e7d 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -838,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 	ret = acpi_read_throttling_status(pr, &value);
 	if (ret >= 0) {
 		state = acpi_get_throttling_state(pr, value);
+		if (state == -1) {
+			ACPI_WARNING((AE_INFO,
+				"Invalid throttling state, reset\n"));
+			state = 0;
+			ret = acpi_processor_set_throttling(pr, state);
+			if (ret)
+				return ret;
+		}
 		pr->throttling.state = state;
 	}
 
-- 
GitLab


From 1406de8e11eb043681297adf86d6892ff8efc27a Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 15 May 2009 21:12:57 -0700
Subject: [PATCH 1415/1421] Linux 2.6.30-rc6

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 9b2b58c3b3d..b57e1f539e8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
-- 
GitLab


From 520daf7217bc1806c02eb4cfa7805447a3da2f66 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 14 May 2009 17:27:38 -0400
Subject: [PATCH 1416/1421] ACPI: idle: fix init-time TSC check regression

A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2,
(ACPI: idle: mark_tsc_unstable() at init-time, not run-time)
erroneously disabled the TSC on systems that did not actually
have valid deep C-states.

Move the check after the deep-C-states are validated,
via new helper, tsc_check_state(), hich replaces tsc_halts_in_c().

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frans Pop <elendil@planet.nl>
---
 drivers/acpi/processor_idle.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..e39a40a2cea 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -216,7 +216,7 @@ int acpi_processor_resume(struct acpi_device * device)
 }
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
 {
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -226,13 +226,17 @@ static int tsc_halts_in_c(int state)
 		 * C/P/S0/S1 states when this bit is set.
 		 */
 		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return 0;
+			return;
 
 		/*FALL THROUGH*/
 	default:
-		return state > ACPI_STATE_C1;
+		/* TSC could halt in idle, so notify users */
+		if (state > ACPI_STATE_C1)
+			mark_tsc_unstable("TSC halts in idle");
 	}
 }
+#else
+static void tsc_check_state(int state) { return; }
 #endif
 
 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
@@ -581,11 +585,6 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-		/* TSC could halt in idle, so notify users */
-		if (tsc_halts_in_c(cx->type))
-			mark_tsc_unstable("TSC halts in idle");;
-#endif
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
@@ -603,6 +602,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 				acpi_timer_check_state(i, pr, cx);
 			break;
 		}
+		if (cx->valid)
+			tsc_check_state(cx->type);
 
 		if (cx->valid)
 			working++;
-- 
GitLab


From a0bf284bfedd6dc95bbee7ebf5ccf3b5f753a008 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 15 May 2009 01:29:31 -0400
Subject: [PATCH 1417/1421] ACPI: Idle C-states disabled by max_cstate should
 not disable the TSC

Processor idle power states C2 and C3 stop the TSC on many machines.
Linux recognizes this situation and marks the TSC as unstable:

Marking TSC unstable due to TSC halts in idle

But if those same machines are booted with "processor.max_cstate=1",
then there is no need to validate C2 and C3, and no need to
disable the TSC, which can be reliably used as a clocksource.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/acpi/processor_idle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index e39a40a2cea..e65476fdf40 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -582,7 +582,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 
 	pr->power.timer_broadcast_on_state = INT_MAX;
 
-	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
 		switch (cx->type) {
-- 
GitLab


From 36999a5af1b6c5379e59f0ddf434db08d03c19e4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 19 Apr 2009 07:00:41 +0900
Subject: [PATCH 1418/1421] ide-tape: remove back-to-back REQUEST_SENSE
 detection

Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index cb942a9b580..3a53e0834cf 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-	if (drive->pc->c[0] == REQUEST_SENSE &&
-	    pc->c[0] == REQUEST_SENSE) {
-		printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
-			"Two request sense in serial were issued\n");
-	}
-
 	if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
 		drive->failed_pc = pc;
 
-- 
GitLab


From b019447ce73513432af052f30fa239d6dc93e111 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 16 May 2009 19:03:36 +0200
Subject: [PATCH 1419/1421] icside: register second channel of version 6 PCB

The second IDE channel of version 6 PCB is not being registered anymore since
the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host
(take 3)).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/icside.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 4e16ce68b06..36da913cc55 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -466,7 +466,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	struct ide_host *host;
 	unsigned int sel = 0;
 	int ret;
-	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
+	hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL };
 	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
-- 
GitLab


From d8788298d491ee5026981eb751b0341a996b22e4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Sat, 16 May 2009 19:03:36 +0200
Subject: [PATCH 1420/1421] piix: The Sony TZ90 needs the cable type hardcoding

The Sony TZ90 needs the cable type hardcoding. See bug #12734

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by:  Jonathan E. Snow <jesnow@uh.edu>
[bart: port it from ata_piix to piix and give reporter the proper credit]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/piix.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 2aa69993306..69860dea382 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
+	{ 0x27df, 0x104d, 0x900e },	/* ICH7 on Sony TZ-90 */
 	/* end marker */
 	{ 0, }
 };
-- 
GitLab


From 0f6f49a8cd0163fdb1723ed29f01fc65177108dc Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 16 May 2009 13:41:28 -0700
Subject: [PATCH 1421/1421] Fix caller information for warn_slowpath_null

Ian Campbell noticed that since "Eliminate thousands of warnings with
gcc 3.2 build" (commit 57adc4d2dbf968fdbe516359688094eef4d46581) all
WARN_ON()'s currently appear to come from warn_slowpath_null(), eg:

  WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20()

because now that warn_slowpath_null() is in the call path, the
__builtin_return_address(0) returns that, rather than the place that
caused the warning.

Fix this by splitting up the warn_slowpath_null/fmt cases differently,
using a common helper function, and getting the return address in the
right place.  This also happens to avoid the unnecessary stack usage for
the non-stdargs case, and just generally cleans things up.

Make the function name printout use %pS while at it.

Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/panic.c | 35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)

diff --git a/kernel/panic.c b/kernel/panic.c
index 874ecf1307a..984b3ecbd72 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -340,39 +340,44 @@ void oops_exit(void)
 }
 
 #ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
-{
+struct slowpath_args {
+	const char *fmt;
 	va_list args;
-	char function[KSYM_SYMBOL_LEN];
-	unsigned long caller = (unsigned long)__builtin_return_address(0);
-	const char *board;
+};
 
-	sprint_symbol(function, caller);
+static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args)
+{
+	const char *board;
 
 	printk(KERN_WARNING "------------[ cut here ]------------\n");
-	printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
-		line, function);
+	printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller);
 	board = dmi_get_system_info(DMI_PRODUCT_NAME);
 	if (board)
 		printk(KERN_WARNING "Hardware name: %s\n", board);
 
-	if (*fmt) {
-		va_start(args, fmt);
-		vprintk(fmt, args);
-		va_end(args);
-	}
+	if (args)
+		vprintk(args->fmt, args->args);
 
 	print_modules();
 	dump_stack();
 	print_oops_end_marker();
 	add_taint(TAINT_WARN);
 }
+
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
+{
+	struct slowpath_args args;
+
+	args.fmt = fmt;
+	va_start(args.args, fmt);
+	warn_slowpath_common(file, line, __builtin_return_address(0), &args);
+	va_end(args.args);
+}
 EXPORT_SYMBOL(warn_slowpath_fmt);
 
 void warn_slowpath_null(const char *file, int line)
 {
-	static const char *empty = "";
-	warn_slowpath_fmt(file, line, empty);
+	warn_slowpath_common(file, line, __builtin_return_address(0), NULL);
 }
 EXPORT_SYMBOL(warn_slowpath_null);
 #endif
-- 
GitLab