diff --git a/.gitignore b/.gitignore index fdcce40226d7d4273a08cc4ef84bb25755a710a4..090b293b87792a815cf51aeccb590ec37c90cfa3 100644 --- a/.gitignore +++ b/.gitignore @@ -27,6 +27,7 @@ TAGS vmlinux* !vmlinux.lds.S System.map +Module.markers Module.symvers !.gitignore @@ -40,6 +41,7 @@ include/linux/autoconf.h include/linux/compile.h include/linux/version.h include/linux/utsrelease.h +include/linux/bounds.h # stgit generated dirs patches-* diff --git a/.mailmap b/.mailmap index ebf9bf84da0aab5ed944264a5db2a65fe3a3e883..726084286d33e626ddc2bf69db078cdc972c0e4e 100644 --- a/.mailmap +++ b/.mailmap @@ -88,6 +88,7 @@ Rudolf Marek Rui Saraiva Sachin P Sant Sam Ravnborg +S.Çağlar Onur Simon Kelley Stéphane Witzmann Stephen Hemminger diff --git a/CREDITS b/CREDITS index da0a56e23beeca7512d80c762425c4fedfaf45b8..8fec7b3f96d5668fa441bd50fc81626d34f0f0c2 100644 --- a/CREDITS +++ b/CREDITS @@ -403,6 +403,8 @@ D: Linux CD and Support Giveaway List N: Erik Inge Bolsø E: knan@mo.himolde.no D: Misc kernel hacks +D: Updated PC speaker driver for 2.3 +S: Norway N: Andreas E. Bombe E: andreas.bombe@munich.netsurf.de @@ -3116,6 +3118,12 @@ S: Post Office Box 64132 S: Sunnyvale, California 94088-4132 S: USA +N: Stas Sergeev +E: stsp@users.sourceforge.net +D: PCM PC-Speaker driver +D: misc fixes +S: Russia + N: Simon Shapiro E: shimon@i-Connect.Net W: http://www.-i-Connect.Net/~shimon diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index a82a113b4a4b1d3aa6aaf2f9815076ab4f5f2627..1977fab386566e23f501bea233f8f487d16f5c38 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -329,8 +329,6 @@ sgi-visws.txt - short blurb on the SGI Visual Workstations. sh/ - directory with info on porting Linux to a new architecture. -smart-config.txt - - description of the Smart Config makefile feature. sound/ - directory with info on sound card support. sparc/ diff --git a/Documentation/ABI/stable/sysfs-class-ubi b/Documentation/ABI/stable/sysfs-class-ubi new file mode 100644 index 0000000000000000000000000000000000000000..18d471d9faea9bdec594a5bada594b4062ab66fb --- /dev/null +++ b/Documentation/ABI/stable/sysfs-class-ubi @@ -0,0 +1,212 @@ +What: /sys/class/ubi/ +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + The ubi/ class sub-directory belongs to the UBI subsystem and + provides general UBI information, per-UBI device information + and per-UBI volume information. + +What: /sys/class/ubi/version +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + This file contains version of the latest supported UBI on-media + format. Currently it is 1, and there is no plan to change this. + However, if in the future UBI needs on-flash format changes + which cannot be done in a compatible manner, a new format + version will be added. So this is a mechanism for possible + future backward-compatible (but forward-incompatible) + improvements. + +What: /sys/class/ubiX/ +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + The /sys/class/ubi0, /sys/class/ubi1, etc directories describe + UBI devices (UBI device 0, 1, etc). They contain general UBI + device information and per UBI volume information (each UBI + device may have many UBI volumes) + +What: /sys/class/ubi/ubiX/avail_eraseblocks +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Amount of available logical eraseblock. For example, one may + create a new UBI volume which has this amount of logical + eraseblocks. + +What: /sys/class/ubi/ubiX/bad_peb_count +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Count of bad physical eraseblocks on the underlying MTD device. + +What: /sys/class/ubi/ubiX/bgt_enabled +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Contains ASCII "0\n" if the UBI background thread is disabled, + and ASCII "1\n" if it is enabled. + +What: /sys/class/ubi/ubiX/dev +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Major and minor numbers of the character device corresponding + to this UBI device (in : format). + +What: /sys/class/ubi/ubiX/eraseblock_size +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Maximum logical eraseblock size this UBI device may provide. UBI + volumes may have smaller logical eraseblock size because of their + alignment. + +What: /sys/class/ubi/ubiX/max_ec +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Maximum physical eraseblock erase counter value. + +What: /sys/class/ubi/ubiX/max_vol_count +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Maximum number of volumes which this UBI device may have. + +What: /sys/class/ubi/ubiX/min_io_size +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Minimum input/output unit size. All the I/O may only be done + in fractions of the contained number. + +What: /sys/class/ubi/ubiX/mtd_num +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Artem Bityutskiy +Description: + Number of the underlying MTD device. + +What: /sys/class/ubi/ubiX/reserved_for_bad +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Number of physical eraseblocks reserved for bad block handling. + +What: /sys/class/ubi/ubiX/total_eraseblocks +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Total number of good (not marked as bad) physical eraseblocks on + the underlying MTD device. + +What: /sys/class/ubi/ubiX/volumes_count +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Count of volumes on this UBI device. + +What: /sys/class/ubi/ubiX/ubiX_Y/ +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/, + etc directories describe UBI volumes on UBI device X (volumes + 0, 1, etc). + +What: /sys/class/ubi/ubiX/ubiX_Y/alignment +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Volume alignment - the value the logical eraseblock size of + this volume has to be aligned on. For example, 2048 means that + logical eraseblock size is multiple of 2048. In other words, + volume logical eraseblock size is UBI device logical eraseblock + size aligned to the alignment value. + +What: /sys/class/ubi/ubiX/ubiX_Y/corrupted +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n" + if it is corrupted (e.g., due to an interrupted volume update). + +What: /sys/class/ubi/ubiX/ubiX_Y/data_bytes +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + The amount of data this volume contains. This value makes sense + only for static volumes, and for dynamic volume it equivalent + to the total volume size in bytes. + +What: /sys/class/ubi/ubiX/ubiX_Y/dev +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Major and minor numbers of the character device corresponding + to this UBI volume (in : format). + +What: /sys/class/ubi/ubiX/ubiX_Y/name +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Volume name. + +What: /sys/class/ubi/ubiX/ubiX_Y/reserved_ebs +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Count of physical eraseblock reserved for this volume. + Equivalent to the volume size in logical eraseblocks. + +What: /sys/class/ubi/ubiX/ubiX_Y/type +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Volume type. Contains ASCII "dynamic\n" for dynamic volumes and + "static\n" for static volumes. + +What: /sys/class/ubi/ubiX/ubiX_Y/upd_marker +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Contains ASCII "0\n" if the update marker is not set for this + volume, and "1\n" if it is set. The update marker is set when + volume update starts, and cleaned when it ends. So the presence + of the update marker indicates that the volume is being updated + at the moment of the update was interrupted. The later may be + checked using the "corrupted" sysfs file. + +What: /sys/class/ubi/ubiX/ubiX_Y/usable_eb_size +Date: July 2006 +KernelVersion: 2.6.22 +Contact: Artem Bityutskiy +Description: + Logical eraseblock size of this volume. Equivalent to logical + eraseblock size of the device aligned on the volume alignment + value. diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi new file mode 100644 index 0000000000000000000000000000000000000000..5ac1e01bbd483fe5b9f28d9b52890ee7f0771087 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -0,0 +1,46 @@ +What: /sys/class/bdi// +Date: January 2008 +Contact: Peter Zijlstra +Description: + +Provide a place in sysfs for the backing_dev_info object. This allows +setting and retrieving various BDI specific variables. + +The identifier can be either of the following: + +MAJOR:MINOR + + Device number for block devices, or value of st_dev on + non-block filesystems which provide their own BDI, such as NFS + and FUSE. + +default + + The default backing dev, used for non-block device backed + filesystems which do not provide their own BDI. + +Files under /sys/class/bdi// +--------------------------------- + +read_ahead_kb (read-write) + + Size of the read-ahead window in kilobytes + +min_ratio (read-write) + + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_ratio' parameter allows assigning a minimum + percentage of the write-back cache to a particular device. + For example, this is useful for providing a minimum QoS. + +max_ratio (read-write) + + Allows limiting a particular device to use not more than the + given percentage of the write-back cache. This is useful in + situations where we want to avoid one device taking all or + most of the write-back cache. For example in case of an NFS + mount that is prone to get stuck, or a FUSE mount which cannot + be trusted to play fair. diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index b939ebb62871ec6b743b02cd78be1ca6d230baae..80d150458c80c5ac7f7f5f75b3e6ff8a602a19ca 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -145,7 +145,7 @@ Part Ic - DMA addressing limitations int dma_supported(struct device *dev, u64 mask) int -pci_dma_supported(struct device *dev, u64 mask) +pci_dma_supported(struct pci_dev *hwdev, u64 mask) Checks to see if the device can support DMA to the memory described by mask. @@ -189,7 +189,7 @@ dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction direction) dma_addr_t -pci_map_single(struct device *dev, void *cpu_addr, size_t size, +pci_map_single(struct pci_dev *hwdev, void *cpu_addr, size_t size, int direction) Maps a piece of processor virtual memory so it can be accessed by the @@ -395,6 +395,71 @@ Notes: You must do this: See also dma_map_single(). +dma_addr_t +dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction dir, + struct dma_attrs *attrs) + +void +dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction dir, + struct dma_attrs *attrs) + +int +dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) + +void +dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) + +The four functions above are just like the counterpart functions +without the _attrs suffixes, except that they pass an optional +struct dma_attrs*. + +struct dma_attrs encapsulates a set of "dma attributes". For the +definition of struct dma_attrs see linux/dma-attrs.h. + +The interpretation of dma attributes is architecture-specific, and +each attribute should be documented in Documentation/DMA-attributes.txt. + +If struct dma_attrs* is NULL, the semantics of each of these +functions is identical to those of the corresponding function +without the _attrs suffix. As a result dma_map_single_attrs() +can generally replace dma_map_single(), etc. + +As an example of the use of the *_attrs functions, here's how +you could pass an attribute DMA_ATTR_FOO when mapping memory +for DMA: + +#include +/* DMA_ATTR_FOO should be defined in linux/dma-attrs.h and + * documented in Documentation/DMA-attributes.txt */ +... + + DEFINE_DMA_ATTRS(attrs); + dma_set_attr(DMA_ATTR_FOO, &attrs); + .... + n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, &attr); + .... + +Architectures that care about DMA_ATTR_FOO would check for its +presence in their implementations of the mapping and unmapping +routines, e.g.: + +void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + .... + int foo = dma_get_attr(DMA_ATTR_FOO, attrs); + .... + if (foo) + /* twizzle the frobnozzle */ + .... + Part II - Advanced dma_ usage ----------------------------- diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt new file mode 100644 index 0000000000000000000000000000000000000000..6d772f84b477c9f5a4698e87d50fb63649af83d3 --- /dev/null +++ b/Documentation/DMA-attributes.txt @@ -0,0 +1,24 @@ + DMA attributes + ============== + +This document describes the semantics of the DMA attributes that are +defined in linux/dma-attrs.h. + +DMA_ATTR_WRITE_BARRIER +---------------------- + +DMA_ATTR_WRITE_BARRIER is a (write) barrier attribute for DMA. DMA +to a memory region with the DMA_ATTR_WRITE_BARRIER attribute forces +all pending DMA writes to complete, and thus provides a mechanism to +strictly order DMA from a device across all intervening busses and +bridges. This barrier is not specific to a particular type of +interconnect, it applies to the system as a whole, and so its +implementation must account for the idiosyncracies of the system all +the way from the DMA device to memory. + +As an example of a situation where DMA_ATTR_WRITE_BARRIER would be +useful, suppose that a device does a DMA write to indicate that data is +ready and available in memory. The DMA of the "completion indication" +could race with data DMA. Mapping the memory used for completion +indications with DMA_ATTR_WRITE_BARRIER would prevent the race. + diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index d84f89dbf921401ac0e7afbe2d291b4dc304ef97..b463ecd0c7cebf36f53104015afcbeeccf4b934d 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -315,11 +315,11 @@ you should do: dma_addr_t dma_handle; - cpu_addr = pci_alloc_consistent(dev, size, &dma_handle); + cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle); -where dev is a struct pci_dev *. You should pass NULL for PCI like buses -where devices don't have struct pci_dev (like ISA, EISA). This may be -called in interrupt context. +where pdev is a struct pci_dev *. This may be called in interrupt context. +You should use dma_alloc_coherent (see DMA-API.txt) for buses +where devices don't have struct pci_dev (like ISA, EISA). This argument is needed because the DMA translations may be bus specific (and often is private to the bus which the device is attached @@ -332,7 +332,7 @@ __get_free_pages (but takes size instead of a page order). If your driver needs regions sized smaller than a page, you may prefer using the pci_pool interface, described below. -The consistent DMA mapping interfaces, for non-NULL dev, will by +The consistent DMA mapping interfaces, for non-NULL pdev, will by default return a DMA address which is SAC (Single Address Cycle) addressable. Even if the device indicates (via PCI dma mask) that it may address the upper 32-bits and thus perform DAC cycles, consistent @@ -354,9 +354,9 @@ buffer you receive will not cross a 64K boundary. To unmap and free such a DMA region, you call: - pci_free_consistent(dev, size, cpu_addr, dma_handle); + pci_free_consistent(pdev, size, cpu_addr, dma_handle); -where dev, size are the same as in the above call and cpu_addr and +where pdev, size are the same as in the above call and cpu_addr and dma_handle are the values pci_alloc_consistent returned to you. This function may not be called in interrupt context. @@ -371,9 +371,9 @@ Create a pci_pool like this: struct pci_pool *pool; - pool = pci_pool_create(name, dev, size, align, alloc); + pool = pci_pool_create(name, pdev, size, align, alloc); -The "name" is for diagnostics (like a kmem_cache name); dev and size +The "name" is for diagnostics (like a kmem_cache name); pdev and size are as above. The device's hardware alignment requirement for this type of data is "align" (which is expressed in bytes, and must be a power of two). If your device has no boundary crossing restrictions, @@ -472,11 +472,11 @@ To map a single region, you do: void *addr = buffer->ptr; size_t size = buffer->len; - dma_handle = pci_map_single(dev, addr, size, direction); + dma_handle = pci_map_single(pdev, addr, size, direction); and to unmap it: - pci_unmap_single(dev, dma_handle, size, direction); + pci_unmap_single(pdev, dma_handle, size, direction); You should call pci_unmap_single when the DMA activity is finished, e.g. from the interrupt which told you that the DMA transfer is done. @@ -493,17 +493,17 @@ Specifically: unsigned long offset = buffer->offset; size_t size = buffer->len; - dma_handle = pci_map_page(dev, page, offset, size, direction); + dma_handle = pci_map_page(pdev, page, offset, size, direction); ... - pci_unmap_page(dev, dma_handle, size, direction); + pci_unmap_page(pdev, dma_handle, size, direction); Here, "offset" means byte offset within the given page. With scatterlists, you map a region gathered from several regions by: - int i, count = pci_map_sg(dev, sglist, nents, direction); + int i, count = pci_map_sg(pdev, sglist, nents, direction); struct scatterlist *sg; for_each_sg(sglist, sg, count, i) { @@ -527,7 +527,7 @@ accessed sg->address and sg->length as shown above. To unmap a scatterlist, just call: - pci_unmap_sg(dev, sglist, nents, direction); + pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. @@ -550,11 +550,11 @@ correct copy of the DMA buffer. So, firstly, just map it with pci_map_{single,sg}, and after each DMA transfer call either: - pci_dma_sync_single_for_cpu(dev, dma_handle, size, direction); + pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction); or: - pci_dma_sync_sg_for_cpu(dev, sglist, nents, direction); + pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction); as appropriate. @@ -562,7 +562,7 @@ Then, if you wish to let the device get at the DMA area again, finish accessing the data with the cpu, and then before actually giving the buffer to the hardware call either: - pci_dma_sync_single_for_device(dev, dma_handle, size, direction); + pci_dma_sync_single_for_device(pdev, dma_handle, size, direction); or: @@ -739,7 +739,7 @@ failure can be determined by: dma_addr_t dma_handle; - dma_handle = pci_map_single(dev, addr, size, direction); + dma_handle = pci_map_single(pdev, addr, size, direction); if (pci_dma_mapping_error(dma_handle)) { /* * reduce current DMA mapping usage, diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index b2b6366bba5163628d7d4e4617921dda5d442d0f..0eb0d027eb32e139f442eb30e3b92a7560112bed 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml + mac80211.xml debugobjects.xml ### # The build process is as follows (targets): @@ -187,8 +187,11 @@ quiet_cmd_fig2png = FIG2PNG $@ ### # Rule to convert a .c file to inline XML documentation + gen_xml = : + quiet_gen_xml = echo ' GEN $@' +silent_gen_xml = : %.xml: %.c - @echo ' GEN $@' + @$($(quiet)gen_xml) @( \ echo ""; \ expand --tabs=8 < $< | \ diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl new file mode 100644 index 0000000000000000000000000000000000000000..7f5f218015feb8beed681fa7742caced8ac4c76f --- /dev/null +++ b/Documentation/DocBook/debugobjects.tmpl @@ -0,0 +1,391 @@ + + + + + + Debug objects life time + + + + Thomas + Gleixner + +
+ tglx@linutronix.de +
+ + + + + + 2008 + Thomas Gleixner + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Introduction + + debugobjects is a generic infrastructure to track the life time + of kernel objects and validate the operations on those. + + + debugobjects is useful to check for the following error patterns: + + Activation of uninitialized objects + Initialization of active objects + Usage of freed/destroyed objects + + + + debugobjects is not changing the data structure of the real + object so it can be compiled in with a minimal runtime impact + and enabled on demand with a kernel command line option. + + + + + Howto use debugobjects + + A kernel subsystem needs to provide a data structure which + describes the object type and add calls into the debug code at + appropriate places. The data structure to describe the object + type needs at minimum the name of the object type. Optional + functions can and should be provided to fixup detected problems + so the kernel can continue to work and the debug information can + be retrieved from a live system instead of hard core debugging + with serial consoles and stack trace transcripts from the + monitor. + + + The debug calls provided by debugobjects are: + + debug_object_init + debug_object_init_on_stack + debug_object_activate + debug_object_deactivate + debug_object_destroy + debug_object_free + + Each of these functions takes the address of the real object and + a pointer to the object type specific debug description + structure. + + + Each detected error is reported in the statistics and a limited + number of errors are printk'ed including a full stack trace. + + + The statistics are available via debugfs/debug_objects/stats. + They provide information about the number of warnings and the + number of successful fixups along with information about the + usage of the internal tracking objects and the state of the + internal tracking objects pool. + + + + Debug functions + + Debug object function reference +!Elib/debugobjects.c + + + debug_object_init + + This function is called whenever the initialization function + of a real object is called. + + + When the real object is already tracked by debugobjects it is + checked, whether the object can be initialized. Initializing + is not allowed for active and destroyed objects. When + debugobjects detects an error, then it calls the fixup_init + function of the object type description structure if provided + by the caller. The fixup function can correct the problem + before the real initialization of the object happens. E.g. it + can deactivate an active object in order to prevent damage to + the subsystem. + + + When the real object is not yet tracked by debugobjects, + debugobjects allocates a tracker object for the real object + and sets the tracker object state to ODEBUG_STATE_INIT. It + verifies that the object is not on the callers stack. If it is + on the callers stack then a limited number of warnings + including a full stack trace is printk'ed. The calling code + must use debug_object_init_on_stack() and remove the object + before leaving the function which allocated it. See next + section. + + + + + debug_object_init_on_stack + + This function is called whenever the initialization function + of a real object which resides on the stack is called. + + + When the real object is already tracked by debugobjects it is + checked, whether the object can be initialized. Initializing + is not allowed for active and destroyed objects. When + debugobjects detects an error, then it calls the fixup_init + function of the object type description structure if provided + by the caller. The fixup function can correct the problem + before the real initialization of the object happens. E.g. it + can deactivate an active object in order to prevent damage to + the subsystem. + + + When the real object is not yet tracked by debugobjects + debugobjects allocates a tracker object for the real object + and sets the tracker object state to ODEBUG_STATE_INIT. It + verifies that the object is on the callers stack. + + + An object which is on the stack must be removed from the + tracker by calling debug_object_free() before the function + which allocates the object returns. Otherwise we keep track of + stale objects. + + + + + debug_object_activate + + This function is called whenever the activation function of a + real object is called. + + + When the real object is already tracked by debugobjects it is + checked, whether the object can be activated. Activating is + not allowed for active and destroyed objects. When + debugobjects detects an error, then it calls the + fixup_activate function of the object type description + structure if provided by the caller. The fixup function can + correct the problem before the real activation of the object + happens. E.g. it can deactivate an active object in order to + prevent damage to the subsystem. + + + When the real object is not yet tracked by debugobjects then + the fixup_activate function is called if available. This is + necessary to allow the legitimate activation of statically + allocated and initialized objects. The fixup function checks + whether the object is valid and calls the debug_objects_init() + function to initialize the tracking of this object. + + + When the activation is legitimate, then the state of the + associated tracker object is set to ODEBUG_STATE_ACTIVE. + + + + + debug_object_deactivate + + This function is called whenever the deactivation function of + a real object is called. + + + When the real object is tracked by debugobjects it is checked, + whether the object can be deactivated. Deactivating is not + allowed for untracked or destroyed objects. + + + When the deactivation is legitimate, then the state of the + associated tracker object is set to ODEBUG_STATE_INACTIVE. + + + + + debug_object_destroy + + This function is called to mark an object destroyed. This is + useful to prevent the usage of invalid objects, which are + still available in memory: either statically allocated objects + or objects which are freed later. + + + When the real object is tracked by debugobjects it is checked, + whether the object can be destroyed. Destruction is not + allowed for active and destroyed objects. When debugobjects + detects an error, then it calls the fixup_destroy function of + the object type description structure if provided by the + caller. The fixup function can correct the problem before the + real destruction of the object happens. E.g. it can deactivate + an active object in order to prevent damage to the subsystem. + + + When the destruction is legitimate, then the state of the + associated tracker object is set to ODEBUG_STATE_DESTROYED. + + + + + debug_object_free + + This function is called before an object is freed. + + + When the real object is tracked by debugobjects it is checked, + whether the object can be freed. Free is not allowed for + active objects. When debugobjects detects an error, then it + calls the fixup_free function of the object type description + structure if provided by the caller. The fixup function can + correct the problem before the real free of the object + happens. E.g. it can deactivate an active object in order to + prevent damage to the subsystem. + + + Note that debug_object_free removes the object from the + tracker. Later usage of the object is detected by the other + debug checks. + + + + + Fixup functions + + Debug object type description structure +!Iinclude/linux/debugobjects.h + + + fixup_init + + This function is called from the debug code whenever a problem + in debug_object_init is detected. The function takes the + address of the object and the state which is currently + recorded in the tracker. + + + Called from debug_object_init when the object state is: + + ODEBUG_STATE_ACTIVE + + + + The function returns 1 when the fixup was successful, + otherwise 0. The return value is used to update the + statistics. + + + Note, that the function needs to call the debug_object_init() + function again, after the damage has been repaired in order to + keep the state consistent. + + + + + fixup_activate + + This function is called from the debug code whenever a problem + in debug_object_activate is detected. + + + Called from debug_object_activate when the object state is: + + ODEBUG_STATE_NOTAVAILABLE + ODEBUG_STATE_ACTIVE + + + + The function returns 1 when the fixup was successful, + otherwise 0. The return value is used to update the + statistics. + + + Note that the function needs to call the debug_object_activate() + function again after the damage has been repaired in order to + keep the state consistent. + + + The activation of statically initialized objects is a special + case. When debug_object_activate() has no tracked object for + this object address then fixup_activate() is called with + object state ODEBUG_STATE_NOTAVAILABLE. The fixup function + needs to check whether this is a legitimate case of a + statically initialized object or not. In case it is it calls + debug_object_init() and debug_object_activate() to make the + object known to the tracker and marked active. In this case + the function should return 0 because this is not a real fixup. + + + + + fixup_destroy + + This function is called from the debug code whenever a problem + in debug_object_destroy is detected. + + + Called from debug_object_destroy when the object state is: + + ODEBUG_STATE_ACTIVE + + + + The function returns 1 when the fixup was successful, + otherwise 0. The return value is used to update the + statistics. + + + + fixup_free + + This function is called from the debug code whenever a problem + in debug_object_free is detected. Further it can be called + from the debug checks in kfree/vfree, when an active object is + detected from the debug_check_no_obj_freed() sanity checks. + + + Called from debug_object_free() or debug_check_no_obj_freed() + when the object state is: + + ODEBUG_STATE_ACTIVE + + + + The function returns 1 when the fixup was successful, + otherwise 0. The return value is used to update the + statistics. + + + + + Known Bugs And Assumptions + + None (knock on wood). + + + diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 488dd4a4945b84205f66fbdec3ba4b3cbe5af003..b7b1482f6e04ebda24e665d0734fb4786bfc197a 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -119,7 +119,7 @@ X!Ilib/string.c !Elib/string.c Bit Operations -!Iinclude/asm-x86/bitops_32.h +!Iinclude/asm-x86/bitops.h @@ -645,4 +645,58 @@ X!Idrivers/video/console/fonts.c !Edrivers/i2c/i2c-core.c + + Clock Framework + + + The clock framework defines programming interfaces to support + software management of the system clock tree. + This framework is widely used with System-On-Chip (SOC) platforms + to support power management and various devices which may need + custom clock rates. + Note that these "clocks" don't relate to timekeeping or real + time clocks (RTCs), each of which have separate frameworks. + These struct clk instances may be used + to manage for example a 96 MHz signal that is used to shift bits + into and out of peripherals or busses, or otherwise trigger + synchronous state machine transitions in system hardware. + + + + Power management is supported by explicit software clock gating: + unused clocks are disabled, so the system doesn't waste power + changing the state of transistors that aren't in active use. + On some systems this may be backed by hardware clock gating, + where clocks are gated without being disabled in software. + Sections of chips that are powered but not clocked may be able + to retain their last state. + This low power state is often called a retention + mode. + This mode still incurs leakage currents, especially with finer + circuit geometries, but for CMOS circuits power is mostly used + by clocked state changes. + + + + Power-aware drivers only enable their clocks when the device + they manage is in active use. Also, system sleep states often + differ according to which clock domains are active: while a + "standby" state may allow wakeup from several active domains, a + "mem" (suspend-to-RAM) state may require a more wholesale shutdown + of clocks derived from higher speed PLLs and oscillators, limiting + the number of possible wakeup event sources. A driver's suspend + method may need to be aware of system-specific clock constraints + on the target sleep state. + + + + Some platforms support programmable clock generators. These + can be used by external chips of various kinds, such as other + CPUs, multimedia codecs, and devices with strict requirements + for interface clocking. + + +!Iinclude/linux/clk.h + + diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 97618bed4d657538201b4073e159147b3cfbf115..028a8444d95e252a4c0830b70eb6b71311509660 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -72,7 +72,7 @@ kgdb is a source level debugger for linux kernel. It is used along with gdb to debug a linux kernel. The expectation is that gdb can be used to "break in" to the kernel to inspect memory, variables - and look through a cal stack information similar to what an + and look through call stack information similar to what an application developer would use gdb for. It is possible to place breakpoints in kernel code and perform some limited execution stepping. @@ -93,8 +93,10 @@ Compiling a kernel - To enable CONFIG_KGDB, look under the "Kernel debugging" - and then select "KGDB: kernel debugging with remote gdb". + To enable CONFIG_KGDB you should first turn on + "Prompt for development and/or incomplete code/drivers" + (CONFIG_EXPERIMENTAL) in "General setup", then under the + "Kernel debugging" select "KGDB: kernel debugging with remote gdb". Next you should choose one of more I/O drivers to interconnect debugging diff --git a/Documentation/DocBook/rapidio.tmpl b/Documentation/DocBook/rapidio.tmpl index b9e143e28c641ebec67d7e422b8ff81e97cda2a4..54eb26b573720e21a85a4181000b603de4678fcb 100644 --- a/Documentation/DocBook/rapidio.tmpl +++ b/Documentation/DocBook/rapidio.tmpl @@ -133,7 +133,6 @@ !Idrivers/rapidio/rio-sysfs.c PPC32 support -!Iarch/powerpc/kernel/rio.c !Earch/powerpc/sysdev/fsl_rio.c !Iarch/powerpc/sysdev/fsl_rio.c diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 54835610b3d6564945ac5be5f32077bf07626923..0291ade44c172882087b49cd6069267c12a4df3c 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -249,9 +249,11 @@ process is as follows: release a new -rc kernel every week. - Process continues until the kernel is considered "ready", the process should last around 6 weeks. - - A list of known regressions present in each -rc release is - tracked at the following URI: - http://kernelnewbies.org/known_regressions + - Known regressions in each release are periodically posted to the + linux-kernel mailing list. The goal is to reduce the length of + that list to zero before declaring the kernel to be "ready," but, in + the real world, a small number of regressions often remain at + release time. It is worth mentioning what Andrew Morton wrote on the linux-kernel mailing list about kernel releases: @@ -261,7 +263,7 @@ mailing list about kernel releases: 2.6.x.y -stable kernel tree --------------------------- -Kernels with 4 digit versions are -stable kernels. They contain +Kernels with 4-part versions are -stable kernels. They contain relatively small and critical fixes for security problems or significant regressions discovered in a given 2.6.x kernel. @@ -273,7 +275,10 @@ If no 2.6.x.y kernel is available, then the highest numbered 2.6.x kernel is the current stable kernel. 2.6.x.y are maintained by the "stable" team , and are -released almost every other week. +released as needs dictate. The normal release period is approximately +two weeks, but it can be longer if there are no pressing problems. A +security-related problem, instead, can cause a release to happen almost +instantly. The file Documentation/stable_kernel_rules.txt in the kernel tree documents what kinds of changes are acceptable for the -stable tree, and @@ -298,7 +303,9 @@ a while Andrew or the subsystem maintainer pushes it on to Linus for inclusion in mainline. It is heavily encouraged that all new patches get tested in the -mm tree -before they are sent to Linus for inclusion in the main kernel tree. +before they are sent to Linus for inclusion in the main kernel tree. Code +which does not make an appearance in -mm before the opening of the merge +window will prove hard to merge into the mainline. These kernels are not appropriate for use on systems that are supposed to be stable and they are more risky to run than any of the other @@ -354,11 +361,12 @@ Here is a list of some of the different kernel trees available: - SCSI, James Bottomley git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git + - x86, Ingo Molnar + git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git + quilt trees: - - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman + - USB, Driver Core, and I2C, Greg Kroah-Hartman kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ - - x86-64, partly i386, Andi Kleen - ftp.firstfloor.org:/pub/ak/x86_64/quilt/ Other kernel trees can be found listed at http://git.kernel.org/ and in the MAINTAINERS file. @@ -392,8 +400,8 @@ If you want to be advised of the future bug reports, you can subscribe to the bugme-new mailing list (only new bug reports are mailed here) or to the bugme-janitor mailing list (every change in the bugzilla is mailed here) - http://lists.osdl.org/mailman/listinfo/bugme-new - http://lists.osdl.org/mailman/listinfo/bugme-janitors + http://lists.linux-foundation.org/mailman/listinfo/bugme-new + http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors diff --git a/Documentation/arm/Samsung-S3C24XX/NAND.txt b/Documentation/arm/Samsung-S3C24XX/NAND.txt new file mode 100644 index 0000000000000000000000000000000000000000..bc478a3409b8c87d83b468101a4d2f52883548ce --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/NAND.txt @@ -0,0 +1,30 @@ + S3C24XX NAND Support + ==================== + +Introduction +------------ + +Small Page NAND +--------------- + +The driver uses a 512 byte (1 page) ECC code for this setup. The +ECC code is not directly compatible with the default kernel ECC +code, so the driver enforces its own OOB layout and ECC parameters + +Large Page NAND +--------------- + +The driver is capable of handling NAND flash with a 2KiB page +size, with support for hardware ECC generation and correction. + +Unlike the 512byte page mode, the driver generates ECC data for +each 256 byte block in an 2KiB page. This means that more than +one error in a page can be rectified. It also means that the +OOB layout remains the default kernel layout for these flashes. + + +Document Author +--------------- + +Ben Dooks, Copyright 2007 Simtec Electronics + diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index c31b76fa66c462601a92054221baea08643057da..d04e1e30c47f8ff1a8613a369506e58cf5a41a21 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -156,6 +156,8 @@ NAND controller. If there are any problems the latest linux-mtd code can be found from http://www.linux-mtd.infradead.org/ + For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt + Serial ------ diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt new file mode 100644 index 0000000000000000000000000000000000000000..000b0fbdc105f054b63a838f6fc36f7a816ce45a --- /dev/null +++ b/Documentation/braille-console.txt @@ -0,0 +1,34 @@ + Linux Braille Console + +To get early boot messages on a braille device (before userspace screen +readers can start), you first need to compile the support for the usual serial +console (see serial-console.txt), and for braille device (in Device Drivers - +Accessibility). + +Then you need to specify a console=brl, option on the kernel command line, the +format is: + + console=brl,serial_options... + +where serial_options... are the same as described in serial-console.txt + +So for instance you can use console=brl,ttyS0 if the braille device is connected +to the first serial port, and console=brl,ttyS0,115200 to override the baud rate +to 115200, etc. + +By default, the braille device will just show the last kernel message (console +mode). To review previous messages, press the Insert key to switch to the VT +review mode. In review mode, the arrow keys permit to browse in the VT content, +page up/down keys go at the top/bottom of the screen, and the home key goes back +to the cursor, hence providing very basic screen reviewing facility. + +Sound feedback can be obtained by adding the braille_console.sound=1 kernel +parameter. + +For simplicity, only one braille console can be enabled, other uses of +console=brl,... will be discarded. Also note that it does not interfere with +the console selection mecanism described in serial-console.txt + +For now, only the VisioBraille device is supported. + +Samuel Thibault diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt index 31d12e21ff8a9a780cbdeef130421d419338e310..c298a6690e0d67700b08b933a65a3eb4fd97cd96 100644 --- a/Documentation/cgroups.txt +++ b/Documentation/cgroups.txt @@ -500,8 +500,7 @@ post-attachment activity that requires memory allocations or blocking. void fork(struct cgroup_subsy *ss, struct task_struct *task) -Called when a task is forked into a cgroup. Also called during -registration for all existing tasks. +Called when a task is forked into a cgroup. void exit(struct cgroup_subsys *ss, struct task_struct *task) diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt new file mode 100644 index 0000000000000000000000000000000000000000..4dcea42432c279d4e58eb732010d0feae4e2a4ff --- /dev/null +++ b/Documentation/controllers/devices.txt @@ -0,0 +1,48 @@ +Device Whitelist Controller + +1. Description: + +Implement a cgroup to track and enforce open and mknod restrictions +on device files. A device cgroup associates a device access +whitelist with each cgroup. A whitelist entry has 4 fields. +'type' is a (all), c (char), or b (block). 'all' means it applies +to all types and all major and minor numbers. Major and minor are +either an integer or * for all. Access is a composition of r +(read), w (write), and m (mknod). + +The root device cgroup starts with rwm to 'all'. A child device +cgroup gets a copy of the parent. Administrators can then remove +devices from the whitelist or add new entries. A child cgroup can +never receive a device access which is denied its parent. However +when a device access is removed from a parent it will not also be +removed from the child(ren). + +2. User Interface + +An entry is added using devices.allow, and removed using +devices.deny. For instance + + echo 'c 1:3 mr' > /cgroups/1/devices.allow + +allows cgroup 1 to read and mknod the device usually known as +/dev/null. Doing + + echo a > /cgroups/1/devices.deny + +will remove the default 'a *:* mrw' entry. + +3. Security + +Any task can move itself between cgroups. This clearly won't +suffice, but we can decide the best way to adequately restrict +movement as people get some experience with this. We may just want +to require CAP_SYS_ADMIN, which at least is a separate bit from +CAP_MKNOD. We may want to just refuse moving to a cgroup which +isn't a descendent of the current one. Or we may want to use +CAP_MAC_ADMIN, since we really are trying to lock down root. + +CAP_SYS_ADMIN is needed to modify the whitelist or move another +task to a new cgroup. (Again we'll probably want to change that). + +A cgroup may not be granted more permissions than the cgroup's +parent has. diff --git a/Documentation/controllers/resource_counter.txt b/Documentation/controllers/resource_counter.txt new file mode 100644 index 0000000000000000000000000000000000000000..f196ac1d7d2526507a55ff6bc70f903fcc9ee56d --- /dev/null +++ b/Documentation/controllers/resource_counter.txt @@ -0,0 +1,181 @@ + + The Resource Counter + +The resource counter, declared at include/linux/res_counter.h, +is supposed to facilitate the resource management by controllers +by providing common stuff for accounting. + +This "stuff" includes the res_counter structure and routines +to work with it. + + + +1. Crucial parts of the res_counter structure + + a. unsigned long long usage + + The usage value shows the amount of a resource that is consumed + by a group at a given time. The units of measurement should be + determined by the controller that uses this counter. E.g. it can + be bytes, items or any other unit the controller operates on. + + b. unsigned long long max_usage + + The maximal value of the usage over time. + + This value is useful when gathering statistical information about + the particular group, as it shows the actual resource requirements + for a particular group, not just some usage snapshot. + + c. unsigned long long limit + + The maximal allowed amount of resource to consume by the group. In + case the group requests for more resources, so that the usage value + would exceed the limit, the resource allocation is rejected (see + the next section). + + d. unsigned long long failcnt + + The failcnt stands for "failures counter". This is the number of + resource allocation attempts that failed. + + c. spinlock_t lock + + Protects changes of the above values. + + + +2. Basic accounting routines + + a. void res_counter_init(struct res_counter *rc) + + Initializes the resource counter. As usual, should be the first + routine called for a new counter. + + b. int res_counter_charge[_locked] + (struct res_counter *rc, unsigned long val) + + When a resource is about to be allocated it has to be accounted + with the appropriate resource counter (controller should determine + which one to use on its own). This operation is called "charging". + + This is not very important which operation - resource allocation + or charging - is performed first, but + * if the allocation is performed first, this may create a + temporary resource over-usage by the time resource counter is + charged; + * if the charging is performed first, then it should be uncharged + on error path (if the one is called). + + c. void res_counter_uncharge[_locked] + (struct res_counter *rc, unsigned long val) + + When a resource is released (freed) it should be de-accounted + from the resource counter it was accounted to. This is called + "uncharging". + + The _locked routines imply that the res_counter->lock is taken. + + + 2.1 Other accounting routines + + There are more routines that may help you with common needs, like + checking whether the limit is reached or resetting the max_usage + value. They are all declared in include/linux/res_counter.h. + + + +3. Analyzing the resource counter registrations + + a. If the failcnt value constantly grows, this means that the counter's + limit is too tight. Either the group is misbehaving and consumes too + many resources, or the configuration is not suitable for the group + and the limit should be increased. + + b. The max_usage value can be used to quickly tune the group. One may + set the limits to maximal values and either load the container with + a common pattern or leave one for a while. After this the max_usage + value shows the amount of memory the container would require during + its common activity. + + Setting the limit a bit above this value gives a pretty good + configuration that works in most of the cases. + + c. If the max_usage is much less than the limit, but the failcnt value + is growing, then the group tries to allocate a big chunk of resource + at once. + + d. If the max_usage is much less than the limit, but the failcnt value + is 0, then this group is given too high limit, that it does not + require. It is better to lower the limit a bit leaving more resource + for other groups. + + + +4. Communication with the control groups subsystem (cgroups) + +All the resource controllers that are using cgroups and resource counters +should provide files (in the cgroup filesystem) to work with the resource +counter fields. They are recommended to adhere to the following rules: + + a. File names + + Field name File name + --------------------------------------------------- + usage usage_in_ + max_usage max_usage_in_ + limit limit_in_ + failcnt failcnt + lock no file :) + + b. Reading from file should show the corresponding field value in the + appropriate format. + + c. Writing to file + + Field Expected behavior + ---------------------------------- + usage prohibited + max_usage reset to usage + limit set the limit + failcnt reset to zero + + + +5. Usage example + + a. Declare a task group (take a look at cgroups subsystem for this) and + fold a res_counter into it + + struct my_group { + struct res_counter res; + + + } + + b. Put hooks in resource allocation/release paths + + int alloc_something(...) + { + if (res_counter_charge(res_counter_ptr, amount) < 0) + return -ENOMEM; + + + } + + void release_something(...) + { + res_counter_uncharge(res_counter_ptr, amount); + + + } + + In order to keep the usage value self-consistent, both the + "res_counter_ptr" and the "amount" in release_something() should be + the same as they were in the alloc_something() when the releasing + resource was allocated. + + c. Provide the way to read res_counter values and set them (the cgroups + still can help with it). + + c. Compile and run :) diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index af3b925ece08945e6ca5ed37147022cfb45c0989..6c442d8426b5928569918ebd149f4818c5657ab1 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -154,6 +154,11 @@ scaling_governor, and by "echoing" the name of another that some governors won't load - they only work on some specific architectures or processors. + +cpuinfo_cur_freq : Current speed of the CPU, in KHz. + +scaling_available_frequencies : List of available frequencies, in KHz. + scaling_min_freq and scaling_max_freq show the current "policy limits" (in kHz). By echoing new values into these @@ -162,6 +167,15 @@ scaling_max_freq show the current "policy limits" (in first set scaling_max_freq, then scaling_min_freq. +affected_cpus : List of CPUs that require software coordination + of frequency. + +related_cpus : List of CPUs that need some sort of frequency + coordination, whether software or hardware. + +scaling_driver : Hardware driver for cpufreq. + +scaling_cur_freq : Current frequency of the CPU, in KHz. If you have selected the "userspace" governor which allows you to set the CPU operating frequency to a specific value, you can read out diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index aa854b9b18cda8de6fae047540a529b55ca81405..fb7b361e6eea66c573af07d86c415ad4371dcb64 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -171,6 +171,7 @@ files describing that cpuset: - memory_migrate flag: if set, move pages to cpusets nodes - cpu_exclusive flag: is cpu placement exclusive? - mem_exclusive flag: is memory placement exclusive? + - mem_hardwall flag: is memory allocation hardwalled - memory_pressure: measure of how much paging pressure in cpuset In addition, the root cpuset only has the following file: @@ -222,17 +223,18 @@ If a cpuset is cpu or mem exclusive, no other cpuset, other than a direct ancestor or descendent, may share any of the same CPUs or Memory Nodes. -A cpuset that is mem_exclusive restricts kernel allocations for -page, buffer and other data commonly shared by the kernel across -multiple users. All cpusets, whether mem_exclusive or not, restrict -allocations of memory for user space. This enables configuring a -system so that several independent jobs can share common kernel data, -such as file system pages, while isolating each jobs user allocation in -its own cpuset. To do this, construct a large mem_exclusive cpuset to -hold all the jobs, and construct child, non-mem_exclusive cpusets for -each individual job. Only a small amount of typical kernel memory, -such as requests from interrupt handlers, is allowed to be taken -outside even a mem_exclusive cpuset. +A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled", +i.e. it restricts kernel allocations for page, buffer and other data +commonly shared by the kernel across multiple users. All cpusets, +whether hardwalled or not, restrict allocations of memory for user +space. This enables configuring a system so that several independent +jobs can share common kernel data, such as file system pages, while +isolating each job's user allocation in its own cpuset. To do this, +construct a large mem_exclusive cpuset to hold all the jobs, and +construct child, non-mem_exclusive cpusets for each individual job. +Only a small amount of typical kernel memory, such as requests from +interrupt handlers, is allowed to be taken outside even a +mem_exclusive cpuset. 1.5 What is memory_pressure ? @@ -707,7 +709,7 @@ Now you want to do something with this cpuset. In this directory you can find several files: # ls -cpus cpu_exclusive mems mem_exclusive tasks +cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks Reading them will give you information about the state of this cpuset: the CPUs and Memory Nodes it can use, the processes that are using diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt new file mode 100644 index 0000000000000000000000000000000000000000..6680cab2c705c19826049958831b6a3dbdff29d0 --- /dev/null +++ b/Documentation/device-mapper/dm-crypt.txt @@ -0,0 +1,52 @@ +dm-crypt +========= + +Device-Mapper's "crypt" target provides transparent encryption of block devices +using the kernel crypto API. + +Parameters: + + + Encryption cipher and an optional IV generation mode. + (In format cipher-chainmode-ivopts:ivmode). + Examples: + des + aes-cbc-essiv:sha256 + twofish-ecb + + /proc/crypto contains supported crypto modes + + + Key used for encryption. It is encoded as a hexadecimal number. + You can only use key sizes that are valid for the selected cipher. + + + The IV offset is a sector count that is added to the sector number + before creating the IV. + + + This is the device that is going to be used as backend and contains the + encrypted data. You can specify it as a path like /dev/xxx or a device + number :. + + + Starting sector within the device where the encrypted data begins. + +Example scripts +=============== +LUKS (Linux Unified Key Setup) is now the preferred way to set up disk +encryption with dm-crypt using the 'cryptsetup' utility, see +http://luks.endorphin.org/ + +[[ +#!/bin/sh +# Create a crypt device using dmsetup +dmsetup create crypt1 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0" +]] + +[[ +#!/bin/sh +# Create a crypt device using cryptsetup and LUKS header with default cipher +cryptsetup luksFormat $1 +cryptsetup luksOpen $1 crypt1 +]] diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 354aec047c0e93662894f5043db6aa4153cddc15..881e6dd03aea411bb9a1b0b11aa3b4fb3a90761e 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -141,6 +141,7 @@ mkprep mktables mktree modpost +modules.order modversions.h* offset.h offsets.h @@ -171,6 +172,7 @@ sm_tbl* split-include tags tftpboot.img +timeconst.h times.h* tkparse trix_boot.h diff --git a/Documentation/fb/gxfb.txt b/Documentation/fb/gxfb.txt new file mode 100644 index 0000000000000000000000000000000000000000..2f640903bbb2ee39c88bb7798f87a7fb42806904 --- /dev/null +++ b/Documentation/fb/gxfb.txt @@ -0,0 +1,52 @@ +[This file is cloned from VesaFB/aty128fb] + +What is gxfb? +================= + +This is a graphics framebuffer driver for AMD Geode GX2 based processors. + +Advantages: + + * No need to use AMD's VSA code (or other VESA emulation layer) in the + BIOS. + * It provides a nice large console (128 cols + 48 lines with 1024x768) + without using tiny, unreadable fonts. + * You can run XF68_FBDev on top of /dev/fb0 + * Most important: boot logo :-) + +Disadvantages: + + * graphic mode is slower than text mode... + + +How to use it? +============== + +Switching modes is done using gxfb.mode_option=... boot +parameter or using `fbset' program. + +See Documentation/fb/modedb.txt for more information on modedb +resolutions. + + +X11 +=== + +XF68_FBDev should generally work fine, but it is non-accelerated. + + +Configuration +============= + +You can pass kernel command line options to gxfb with gxfb.