diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index e471bc466a7e1c68a3e526843e138d178d96fc05..b2b6366bba5163628d7d4e4617921dda5d442d0f 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -11,7 +11,8 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
- genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml
+ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
+ mac80211.xml
###
# The build process is as follows (targets):
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
new file mode 100644
index 0000000000000000000000000000000000000000..b651e0a4b1c0bdc3e050b8e5c6610c907ee92ea0
--- /dev/null
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -0,0 +1,335 @@
+
+
+
+
+
+ The mac80211 subsystem for kernel developers
+
+
+
+ Johannes
+ Berg
+
+ johannes@sipsolutions.net
+
+
+
+
+
+ 2007
+ 2008
+ Johannes Berg
+
+
+
+
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2 as published by the Free Software Foundation.
+
+
+
+ This documentation is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+
+
+
+ You should have received a copy of the GNU General Public
+ License along with this documentation; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+
+
+
+ For more details see the file COPYING in the source
+ distribution of Linux.
+
+
+
+
+!Pinclude/net/mac80211.h Introduction
+!Pinclude/net/mac80211.h Warning
+
+
+
+
+
+
+
+
+ The basic mac80211 driver interface
+
+
+ You should read and understand the information contained
+ within this part of the book while implementing a driver.
+ In some chapters, advanced usage is noted, that may be
+ skipped at first.
+
+
+ This part of the book only covers station and monitor mode
+ functionality, additional information required to implement
+ the other modes is covered in the second part of the book.
+
+
+
+
+ Basic hardware handling
+ TBD
+
+ This chapter shall contain information on getting a hw
+ struct allocated and registered with mac80211.
+
+
+ Since it is required to allocate rates/modes before registering
+ a hw struct, this chapter shall also contain information on setting
+ up the rate/mode structs.
+
+
+ Additionally, some discussion about the callbacks and
+ the general programming model should be in here, including
+ the definition of ieee80211_ops which will be referred to
+ a lot.
+
+
+ Finally, a discussion of hardware capabilities should be done
+ with references to other parts of the book.
+
+
+!Finclude/net/mac80211.h ieee80211_hw
+!Finclude/net/mac80211.h ieee80211_hw_flags
+!Finclude/net/mac80211.h SET_IEEE80211_DEV
+!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
+!Finclude/net/mac80211.h ieee80211_ops
+!Finclude/net/mac80211.h ieee80211_alloc_hw
+!Finclude/net/mac80211.h ieee80211_register_hw
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_unregister_hw
+!Finclude/net/mac80211.h ieee80211_free_hw
+
+
+
+ PHY configuration
+ TBD
+
+ This chapter should describe PHY handling including
+ start/stop callbacks and the various structures used.
+
+!Finclude/net/mac80211.h ieee80211_conf
+!Finclude/net/mac80211.h ieee80211_conf_flags
+
+
+
+ Virtual interfaces
+ TBD
+
+ This chapter should describe virtual interface basics
+ that are relevant to the driver (VLANs, MGMT etc are not.)
+ It should explain the use of the add_iface/remove_iface
+ callbacks as well as the interface configuration callbacks.
+
+ Things related to AP mode should be discussed there.
+
+ Things related to supporting multiple interfaces should be
+ in the appropriate chapter, a BIG FAT note should be here about
+ this though and the recommendation to allow only a single
+ interface in STA mode at first!
+
+!Finclude/net/mac80211.h ieee80211_if_types
+!Finclude/net/mac80211.h ieee80211_if_init_conf
+!Finclude/net/mac80211.h ieee80211_if_conf
+
+
+
+ Receive and transmit processing
+
+ what should be here
+ TBD
+
+ This should describe the receive and transmit
+ paths in mac80211/the drivers as well as
+ transmit status handling.
+
+
+
+ Frame format
+!Pinclude/net/mac80211.h Frame format
+
+
+ Alignment issues
+ TBD
+
+
+ Calling into mac80211 from interrupts
+!Pinclude/net/mac80211.h Calling mac80211 from interrupts
+
+
+ functions/definitions
+!Finclude/net/mac80211.h ieee80211_rx_status
+!Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h ieee80211_tx_control
+!Finclude/net/mac80211.h ieee80211_tx_status_flags
+!Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_irqsafe
+!Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
+!Finclude/net/mac80211.h ieee80211_rts_get
+!Finclude/net/mac80211.h ieee80211_rts_duration
+!Finclude/net/mac80211.h ieee80211_ctstoself_get
+!Finclude/net/mac80211.h ieee80211_ctstoself_duration
+!Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/mac80211.h ieee80211_get_hdrlen
+!Finclude/net/mac80211.h ieee80211_wake_queue
+!Finclude/net/mac80211.h ieee80211_stop_queue
+!Finclude/net/mac80211.h ieee80211_start_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
+!Finclude/net/mac80211.h ieee80211_wake_queues
+
+
+
+
+ Frame filtering
+!Pinclude/net/mac80211.h Frame filtering
+!Finclude/net/mac80211.h ieee80211_filter_flags
+
+
+
+
+ Advanced driver interface
+
+
+ Information contained within this part of the book is
+ of interest only for advanced interaction of mac80211
+ with drivers to exploit more hardware capabilities and
+ improve performance.
+
+
+
+
+ Hardware crypto acceleration
+!Pinclude/net/mac80211.h Hardware crypto acceleration
+
+!Finclude/net/mac80211.h set_key_cmd
+!Finclude/net/mac80211.h ieee80211_key_conf
+!Finclude/net/mac80211.h ieee80211_key_alg
+!Finclude/net/mac80211.h ieee80211_key_flags
+
+
+
+ Multiple queues and QoS support
+ TBD
+!Finclude/net/mac80211.h ieee80211_tx_queue_params
+!Finclude/net/mac80211.h ieee80211_tx_queue_stats_data
+!Finclude/net/mac80211.h ieee80211_tx_queue
+
+
+
+ Access point mode support
+ TBD
+ Some parts of the if_conf should be discussed here instead
+
+ Insert notes about VLAN interfaces with hw crypto here or
+ in the hw crypto chapter.
+
+!Finclude/net/mac80211.h ieee80211_get_buffered_bc
+!Finclude/net/mac80211.h ieee80211_beacon_get
+
+
+
+ Supporting multiple virtual interfaces
+ TBD
+
+ Note: WDS with identical MAC address should almost always be OK
+
+
+ Insert notes about having multiple virtual interfaces with
+ different MAC addresses here, note which configurations are
+ supported by mac80211, add notes about supporting hw crypto
+ with it.
+
+
+
+
+ Hardware scan offload
+ TBD
+!Finclude/net/mac80211.h ieee80211_scan_completed
+
+
+
+
+ Rate control interface
+
+ TBD
+
+ This part of the book describes the rate control algorithm
+ interface and how it relates to mac80211 and drivers.
+
+
+
+ dummy chapter
+ TBD
+
+
+
+
+ Internals
+
+ TBD
+
+ This part of the book describes mac80211 internals.
+
+
+
+
+ Key handling
+
+ Key handling basics
+!Pnet/mac80211/key.c Key handling basics
+
+
+ MORE TBD
+ TBD
+
+
+
+
+ Receive processing
+ TBD
+
+
+
+ Transmit processing
+ TBD
+
+
+
+ Station info handling
+
+ Programming information
+!Fnet/mac80211/sta_info.h sta_info
+!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
+
+
+ STA information lifetime rules
+!Pnet/mac80211/sta_info.c STA information lifetime rules
+
+
+
+
+ Synchronisation
+ TBD
+ Locking, lots of RCU
+
+
+
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 4b70622a8a914b900f2910779f52a90042797323..af0e9393bf684d62c70afcaa1c620709fceebb86 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -203,14 +203,6 @@ Who: linuxppc-dev@ozlabs.org
---------------------------
-What: sk98lin network driver
-When: Feburary 2008
-Why: In kernel tree version of driver is unmaintained. Sk98lin driver
- replaced by the skge driver.
-Who: Stephen Hemminger
-
----------------------------
-
What: i386/x86_64 bzImage symlinks
When: April 2010
@@ -221,8 +213,6 @@ Who: Thomas Gleixner
---------------------------
----------------------------
-
What: i2c-i810, i2c-prosavage and i2c-savage4
When: May 2008
Why: These drivers are superseded by i810fb, intelfb and savagefb.
@@ -230,33 +220,6 @@ Who: Jean Delvare
---------------------------
-What: bcm43xx wireless network driver
-When: 2.6.26
-Files: drivers/net/wireless/bcm43xx
-Why: This driver's functionality has been replaced by the
- mac80211-based b43 and b43legacy drivers.
-Who: John W. Linville
-
----------------------------
-
-What: ieee80211 softmac wireless networking component
-When: 2.6.26 (or after removal of bcm43xx and port of zd1211rw to mac80211)
-Files: net/ieee80211/softmac
-Why: No in-kernel drivers will depend on it any longer.
-Who: John W. Linville
-
----------------------------
-
-What: rc80211-simple rate control algorithm for mac80211
-When: 2.6.26
-Files: net/mac80211/rc80211-simple.c
-Why: This algorithm was provided for reference but always exhibited bad
- responsiveness and performance and has some serious flaws. It has been
- replaced by rc80211-pid.
-Who: Stefano Brivio
-
----------------------------
-
What (Why):
- include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
(superseded by xt_TOS/xt_tos target & match)
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 23df051dbf69f4a10c10cbbf82188b581c245e66..79b7dbd2214190ae9bf9bce988faa176491c5bce 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -80,7 +80,7 @@ once you enable the radio, will depend on your hardware and driver combination.
e.g. With the BCM4318 on the Acer Aspire 5020 series:
ndiswrapper: Light blinks on when transmitting
-bcm43xx/b43: Solid light, blinks off when transmitting
+b43: Solid light, blinks off when transmitting
Wireless radio control is unconditionally enabled - all Acer laptops that support
acer-wmi come with built-in wireless. However, should you feel so inclined to
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index c485ee028bd9dd00b9a4cf327471f87a8295f615..1634c6dcecaee01db646e5e9c4bbef3173557310 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -100,8 +100,6 @@ tuntap.txt
- TUN/TAP device driver, allowing user space Rx/Tx of packets.
vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-wan-router.txt
- - WAN router documentation
wavelan.txt
- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
x25.txt
diff --git a/Documentation/networking/bcm43xx.txt b/Documentation/networking/bcm43xx.txt
deleted file mode 100644
index d602c8d6ff3e5d6ea9614286550d6bc15756c24b..0000000000000000000000000000000000000000
--- a/Documentation/networking/bcm43xx.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-
- BCM43xx Linux Driver Project
- ============================
-
-Introduction
-------------
-
-Many of the wireless devices found in modern notebook computers are
-based on the wireless chips produced by Broadcom. These devices have
-been a problem for Linux users as there is no open-source driver
-available. In addition, Broadcom has not released specifications
-for the device, and driver availability has been limited to the
-binary-only form used in the GPL versions of AP hardware such as the
-Linksys WRT54G, and the Windows and OS X drivers. Before this project
-began, the only way to use these devices were to use the Windows or
-OS X drivers with either the Linuxant or ndiswrapper modules. There
-is a strong penalty if this method is used as loading the binary-only
-module "taints" the kernel, and no kernel developer will help diagnose
-any kernel problems.
-
-Development
------------
-
-This driver has been developed using
-a clean-room technique that is described at
-http://bcm-specs.sipsolutions.net/ReverseEngineeringProcess. For legal
-reasons, none of the clean-room crew works on the on the Linux driver,
-and none of the Linux developers sees anything but the specifications,
-which are the ultimate product of the reverse-engineering group.
-
-Software
---------
-
-Since the release of the 2.6.17 kernel, the bcm43xx driver has been
-distributed with the kernel source, and is prebuilt in most, if not
-all, distributions. There is, however, additional software that is
-required. The firmware used by the chip is the intellectual property
-of Broadcom and they have not given the bcm43xx team redistribution
-rights to this firmware. Since we cannot legally redistribute
-the firmware we cannot include it with the driver. Furthermore, it
-cannot be placed in the downloadable archives of any distributing
-organization; therefore, the user is responsible for obtaining the
-firmware and placing it in the appropriate location so that the driver
-can find it when initializing.
-
-To help with this process, the bcm43xx developers provide a separate
-program named bcm43xx-fwcutter to "cut" the firmware out of a
-Windows or OS X driver and write the extracted files to the proper
-location. This program is usually provided with the distribution;
-however, it may be downloaded from
-
-http://developer.berlios.de/project/showfiles.php?group_id=4547
-
-The firmware is available in two versions. V3 firmware is used with
-the in-kernel bcm43xx driver that uses a software MAC layer called
-SoftMAC, and will have a microcode revision of 0x127 or smaller. The
-V4 firmware is used by an out-of-kernel driver employing a variation of
-the Devicescape MAC layer known as d80211. Once bcm43xx-d80211 reaches
-a satisfactory level of development, it will replace bcm43xx-softmac
-in the kernel as it is much more flexible and powerful.
-
-A source for the latest V3 firmware is
-
-http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o
-
-Once this file is downloaded, the command
-'bcm43xx-fwcutter -w '
-will extract the microcode and write it to directory
-. The correct directory will depend on your distribution;
-however, most use '/lib/firmware'. Once this step is completed,
-the bcm3xx driver should load when the system is booted. To see
-any messages relating to the driver, issue the command 'dmesg |
-grep bcm43xx' from a terminal window. If there are any problems,
-please send that output to Bcm43xx-dev@lists.berlios.de.
-
-Although the driver has been in-kernel since 2.6.17, the earliest
-version is quite limited in its capability. Patches that include
-all features of later versions are available for the stable kernel
-versions from 2.6.18. These will be needed if you use a BCM4318,
-or a PCI Express version (BCM4311 and BCM4312). In addition, if you
-have an early BCM4306 and more than 1 GB RAM, your kernel will need
-to be patched. These patches, which are being updated regularly,
-are available at ftp://lwfinger.dynalias.org/patches. Look for
-combined_2.6.YY.patch. Of course you will need kernel source downloaded
-from kernel.org, or the source from your distribution.
-
-If you build your own kernel, please enable CONFIG_BCM43XX_DEBUG
-and CONFIG_IEEE80211_SOFTMAC_DEBUG. The log information provided is
-essential for solving any problems.
diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt
deleted file mode 100644
index bc2ab419a74aff2f60f147860cc66ff9713ef60f..0000000000000000000000000000000000000000
--- a/Documentation/networking/wan-router.txt
+++ /dev/null
@@ -1,621 +0,0 @@
-------------------------------------------------------------------------------
-Linux WAN Router Utilities Package
-------------------------------------------------------------------------------
-Version 2.2.1
-Mar 28, 2001
-Author: Nenad Corbic
-Copyright (c) 1995-2001 Sangoma Technologies Inc.
-------------------------------------------------------------------------------
-
-INTRODUCTION
-
-Wide Area Networks (WANs) are used to interconnect Local Area Networks (LANs)
-and/or stand-alone hosts over vast distances with data transfer rates
-significantly higher than those achievable with commonly used dial-up
-connections.
-
-Usually an external device called `WAN router' sitting on your local network
-or connected to your machine's serial port provides physical connection to
-WAN. Although router's job may be as simple as taking your local network
-traffic, converting it to WAN format and piping it through the WAN link, these
-devices are notoriously expensive, with prices as much as 2 - 5 times higher
-then the price of a typical PC box.
-
-Alternatively, considering robustness and multitasking capabilities of Linux,
-an internal router can be built (most routers use some sort of stripped down
-Unix-like operating system anyway). With a number of relatively inexpensive WAN
-interface cards available on the market, a perfectly usable router can be
-built for less than half a price of an external router. Yet a Linux box
-acting as a router can still be used for other purposes, such as fire-walling,
-running FTP, WWW or DNS server, etc.
-
-This kernel module introduces the notion of a WAN Link Driver (WLD) to Linux
-operating system and provides generic hardware-independent services for such
-drivers. Why can existing Linux network device interface not be used for
-this purpose? Well, it can. However, there are a few key differences between
-a typical network interface (e.g. Ethernet) and a WAN link.
-
-Many WAN protocols, such as X.25 and frame relay, allow for multiple logical
-connections (known as `virtual circuits' in X.25 terminology) over a single
-physical link. Each such virtual circuit may (and almost always does) lead
-to a different geographical location and, therefore, different network. As a
-result, it is the virtual circuit, not the physical link, that represents a
-route and, therefore, a network interface in Linux terms.
-
-To further complicate things, virtual circuits are usually volatile in nature
-(excluding so called `permanent' virtual circuits or PVCs). With almost no
-time required to set up and tear down a virtual circuit, it is highly desirable
-to implement on-demand connections in order to minimize network charges. So
-unlike a typical network driver, the WAN driver must be able to handle multiple
-network interfaces and cope as multiple virtual circuits come into existence
-and go away dynamically.
-
-Last, but not least, WAN configuration is much more complex than that of say
-Ethernet and may well amount to several dozens of parameters. Some of them
-are "link-wide" while others are virtual circuit-specific. The same holds
-true for WAN statistics which is by far more extensive and extremely useful
-when troubleshooting WAN connections. Extending the ifconfig utility to suit
-these needs may be possible, but does not seem quite reasonable. Therefore, a
-WAN configuration utility and corresponding application programmer's interface
-is needed for this purpose.
-
-Most of these problems are taken care of by this module. Its goal is to
-provide a user with more-or-less standard look and feel for all WAN devices and
-assist a WAN device driver writer by providing common services, such as:
-
- o User-level interface via /proc file system
- o Centralized configuration
- o Device management (setup, shutdown, etc.)
- o Network interface management (dynamic creation/destruction)
- o Protocol encapsulation/decapsulation
-
-To ba able to use the Linux WAN Router you will also need a WAN Tools package
-available from
-
- ftp.sangoma.com/pub/linux/current_wanpipe/wanpipe-X.Y.Z.tgz
-
-where vX.Y.Z represent the wanpipe version number.
-
-For technical questions and/or comments please e-mail to ncorbic@sangoma.com.
-For general inquiries please contact Sangoma Technologies Inc. by
-
- Hotline: 1-800-388-2475 (USA and Canada, toll free)
- Phone: (905) 474-1990 ext: 106
- Fax: (905) 474-9223
- E-mail: dm@sangoma.com (David Mandelstam)
- WWW: http://www.sangoma.com
-
-
-INSTALLATION
-
-Please read the WanpipeForLinux.pdf manual on how to
-install the WANPIPE tools and drivers properly.
-
-
-After installing wanpipe package: /usr/local/wanrouter/doc.
-On the ftp.sangoma.com : /linux/current_wanpipe/doc
-
-
-COPYRIGHT AND LICENSING INFORMATION
-
-This program is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free Software
-Foundation; either version 2, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc., 675 Mass
-Ave, Cambridge, MA 02139, USA.
-
-
-
-ACKNOWLEDGEMENTS
-
-This product is based on the WANPIPE(tm) Multiprotocol WAN Router developed
-by Sangoma Technologies Inc. for Linux 2.0.x and 2.2.x. Success of the WANPIPE
-together with the next major release of Linux kernel in summer 1996 commanded
-adequate changes to the WANPIPE code to take full advantage of new Linux
-features.
-
-Instead of continuing developing proprietary interface tied to Sangoma WAN
-cards, we decided to separate all hardware-independent code into a separate
-module and defined two levels of interfaces - one for user-level applications
-and another for kernel-level WAN drivers. WANPIPE is now implemented as a
-WAN driver compliant with the WAN Link Driver interface. Also a general
-purpose WAN configuration utility and a set of shell scripts was developed to
-support WAN router at the user level.
-
-Many useful ideas concerning hardware-independent interface implementation
-were given by Mike McLagan and his implementation
-of the Frame Relay router and drivers for Sangoma cards (dlci/sdla).
-
-With the new implementation of the APIs being incorporated into the WANPIPE,
-a special thank goes to Alan Cox in providing insight into BSD sockets.
-
-Special thanks to all the WANPIPE users who performed field-testing, reported
-bugs and made valuable comments and suggestions that help us to improve this
-product.
-
-
-
-NEW IN THIS RELEASE
-
- o Updated the WANCFG utility
- Calls the pppconfig to configure the PPPD
- for async connections.
-
- o Added the PPPCONFIG utility
- Used to configure the PPPD daemon for the
- WANPIPE Async PPP and standard serial port.
- The wancfg calls the pppconfig to configure
- the pppd.
-
- o Fixed the PCI autodetect feature.
- The SLOT 0 was used as an autodetect option
- however, some high end PC's slot numbers start
- from 0.
-
- o This release has been tested with the new backupd
- daemon release.
-
-
-PRODUCT COMPONENTS AND RELATED FILES
-
-/etc: (or user defined)
- wanpipe1.conf default router configuration file
-
-/lib/modules/X.Y.Z/misc:
- wanrouter.o router kernel loadable module
- af_wanpipe.o wanpipe api socket module
-
-/lib/modules/X.Y.Z/net:
- sdladrv.o Sangoma SDLA support module
- wanpipe.o Sangoma WANPIPE(tm) driver module
-
-/proc/net/wanrouter
- Config reads current router configuration
- Status reads current router status
- {name} reads WAN driver statistics
-
-/usr/sbin:
- wanrouter wanrouter start-up script
- wanconfig wanrouter configuration utility
- sdladump WANPIPE adapter memory dump utility
- fpipemon Monitor for Frame Relay
- cpipemon Monitor for Cisco HDLC
- ppipemon Monitor for PPP
- xpipemon Monitor for X25
- wpkbdmon WANPIPE keyboard led monitor/debugger
-
-/usr/local/wanrouter:
- README this file
- COPYING GNU General Public License
- Setup installation script
- Filelist distribution definition file
- wanrouter.rc meta-configuration file
- (used by the Setup and wanrouter script)
-
-/usr/local/wanrouter/doc:
- wanpipeForLinux.pdf WAN Router User's Manual
-
-/usr/local/wanrouter/patches:
- wanrouter-v2213.gz patch for Linux kernels 2.2.11 up to 2.2.13.
- wanrouter-v2214.gz patch for Linux kernel 2.2.14.
- wanrouter-v2215.gz patch for Linux kernels 2.2.15 to 2.2.17.
- wanrouter-v2218.gz patch for Linux kernels 2.2.18 and up.
- wanrouter-v240.gz patch for Linux kernel 2.4.0.
- wanrouter-v242.gz patch for Linux kernel 2.4.2 and up.
- wanrouter-v2034.gz patch for Linux kernel 2.0.34
- wanrouter-v2036.gz patch for Linux kernel 2.0.36 and up.
-
-/usr/local/wanrouter/patches/kdrivers:
- Sources of the latest WANPIPE device drivers.
- These are used to UPGRADE the linux kernel to the newest
- version if the kernel source has already been patched with
- WANPIPE drivers.
-
-/usr/local/wanrouter/samples:
- interface sample interface configuration file
- wanpipe1.cpri CHDLC primary port
- wanpipe2.csec CHDLC secondary port
- wanpipe1.fr Frame Relay protocol
- wanpipe1.ppp PPP protocol )
- wanpipe1.asy CHDLC ASYNC protocol
- wanpipe1.x25 X25 protocol
- wanpipe1.stty Sync TTY driver (Used by Kernel PPPD daemon)
- wanpipe1.atty Async TTY driver (Used by Kernel PPPD daemon)
- wanrouter.rc sample meta-configuration file
-
-/usr/local/wanrouter/util:
- * wan-tools utilities source code
-
-/usr/local/wanrouter/api/x25:
- * x25 api sample programs.
-/usr/local/wanrouter/api/chdlc:
- * chdlc api sample programs.
-/usr/local/wanrouter/api/fr:
- * fr api sample programs.
-/usr/local/wanrouter/config/wancfg:
- wancfg WANPIPE GUI configuration program.
- Creates wanpipe#.conf files.
-/usr/local/wanrouter/config/cfgft1:
- cfgft1 GUI CSU/DSU configuration program.
-
-/usr/include/linux:
- wanrouter.h router API definitions
- wanpipe.h WANPIPE API definitions
- sdladrv.h SDLA support module API definitions
- sdlasfm.h SDLA firmware module definitions
- if_wanpipe.h WANPIPE Socket definitions
- sdlapci.h WANPIPE PCI definitions
-
-
-/usr/src/linux/net/wanrouter:
- * wanrouter source code
-
-/var/log:
- wanrouter wanrouter start-up log (created by the Setup script)
-
-/var/lock: (or /var/lock/subsys for RedHat)
- wanrouter wanrouter lock file (created by the Setup script)
-
-/usr/local/wanrouter/firmware:
- fr514.sfm Frame relay firmware for Sangoma S508/S514 card
- cdual514.sfm Dual Port Cisco HDLC firmware for Sangoma S508/S514 card
- ppp514.sfm PPP Firmware for Sangoma S508 and S514 cards
- x25_508.sfm X25 Firmware for Sangoma S508 card.
-
-
-REVISION HISTORY
-
-1.0.0 December 31, 1996 Initial version
-
-1.0.1 January 30, 1997 Status and statistics can be read via /proc
- filesystem entries.
-
-1.0.2 April 30, 1997 Added UDP management via monitors.
-
-1.0.3 June 3, 1997 UDP management for multiple boards using Frame
- Relay and PPP
- Enabled continuous transmission of Configure
- Request Packet for PPP (for 508 only)
- Connection Timeout for PPP changed from 900 to 0
- Flow Control Problem fixed for Frame Relay
-
-1.0.4 July 10, 1997 S508/FT1 monitoring capability in fpipemon and
- ppipemon utilities.
- Configurable TTL for UDP packets.
- Multicast and Broadcast IP source addresses are
- silently discarded.
-
-1.0.5 July 28, 1997 Configurable T391,T392,N391,N392,N393 for Frame
- Relay in router.conf.
- Configurable Memory Address through router.conf
- for Frame Relay, PPP and X.25. (commenting this
- out enables auto-detection).
- Fixed freeing up received buffers using kfree()
- for Frame Relay and X.25.
- Protect sdla_peek() by calling save_flags(),
- cli() and restore_flags().
- Changed number of Trace elements from 32 to 20
- Added DLCI specific data monitoring in FPIPEMON.
-2.0.0 Nov 07, 1997 Implemented protection of RACE conditions by
- critical flags for FRAME RELAY and PPP.
- DLCI List interrupt mode implemented.
- IPX support in FRAME RELAY and PPP.
- IPX Server Support (MARS)
- More driver specific stats included in FPIPEMON
- and PIPEMON.
-
-2.0.1 Nov 28, 1997 Bug Fixes for version 2.0.0.
- Protection of "enable_irq()" while
- "disable_irq()" has been enabled from any other
- routine (for Frame Relay, PPP and X25).
- Added additional Stats for Fpipemon and Ppipemon
- Improved Load Sharing for multiple boards
-
-2.0.2 Dec 09, 1997 Support for PAP and CHAP for ppp has been
- implemented.
-
-2.0.3 Aug 15, 1998 New release supporting Cisco HDLC, CIR for Frame
- relay, Dynamic IP assignment for PPP and Inverse
- Arp support for Frame-relay. Man Pages are
- included for better support and a new utility
- for configuring FT1 cards.
-
-2.0.4 Dec 09, 1998 Dual Port support for Cisco HDLC.
- Support for HDLC (LAPB) API.
- Supports BiSync Streaming code for S502E
- and S503 cards.
- Support for Streaming HDLC API.
- Provides a BSD socket interface for
- creating applications using BiSync
- streaming.
-
-2.0.5 Aug 04, 1999 CHDLC initialization bug fix.
- PPP interrupt driven driver:
- Fix to the PPP line hangup problem.
- New PPP firmware
- Added comments to the startup SYSTEM ERROR messages
- Xpipemon debugging application for the X25 protocol
- New USER_MANUAL.txt
- Fixed the odd boundary 4byte writes to the board.
- BiSync Streaming code has been taken out.
- Available as a patch.
- Streaming HDLC API has been taken out.
- Available as a patch.
-
-2.0.6 Aug 17, 1999 Increased debugging in statup scripts
- Fixed installation bugs from 2.0.5
- Kernel patch works for both 2.2.10 and 2.2.11 kernels.
- There is no functional difference between the two packages
-
-2.0.7 Aug 26, 1999 o Merged X25API code into WANPIPE.
- o Fixed a memory leak for X25API
- o Updated the X25API code for 2.2.X kernels.
- o Improved NEM handling.
-
-2.1.0 Oct 25, 1999 o New code for S514 PCI Card
- o New CHDLC and Frame Relay drivers
- o PPP and X25 are not supported in this release
-
-2.1.1 Nov 30, 1999 o PPP support for S514 PCI Cards
-
-2.1.3 Apr 06, 2000 o Socket based x25api
- o Socket based chdlc api
- o Socket based fr api
- o Dual Port Receive only CHDLC support.
- o Asynchronous CHDLC support (Secondary Port)
- o cfgft1 GUI csu/dsu configurator
- o wancfg GUI configuration file
- configurator.
- o Architectural directory changes.
-
-beta-2.1.4 Jul 2000 o Dynamic interface configuration:
- Network interfaces reflect the state
- of protocol layer. If the protocol becomes
- disconnected, driver will bring down
- the interface. Once the protocol reconnects
- the interface will be brought up.
-
- Note: This option is turned off by default.
-
- o Dynamic wanrouter setup using 'wanconfig':
- wanconfig utility can be used to
- shutdown,restart,start or reconfigure
- a virtual circuit dynamically.
-
- Frame Relay: Each DLCI can be:
- created,stopped,restarted and reconfigured
- dynamically using wanconfig.
-
- ex: wanconfig card wanpipe1 dev wp1_fr16 up
-
- o Wanrouter startup via command line arguments:
- wanconfig also supports wanrouter startup via command line
- arguments. Thus, there is no need to create a wanpipe#.conf
- configuration file.
-
- o Socket based x25api update/bug fixes.
- Added support for LCN numbers greater than 255.
- Option to pass up modem messages.
- Provided a PCI IRQ check, so a single S514
- card is guaranteed to have a non-sharing interrupt.
-
- o Fixes to the wancfg utility.
- o New FT1 debugging support via *pipemon utilities.
- o Frame Relay ARP support Enabled.
-
-beta3-2.1.4 Jul 2000 o X25 M_BIT Problem fix.
- o Added the Multi-Port PPP
- Updated utilities for the Multi-Port PPP.
-
-2.1.4 Aut 2000
- o In X25API:
- Maximum packet an application can send
- to the driver has been extended to 4096 bytes.
-
- Fixed the x25 startup bug. Enable
- communications only after all interfaces
- come up. HIGH SVC/PVC is used to calculate
- the number of channels.
- Enable protocol only after all interfaces
- are enabled.
-
- o Added an extra state to the FT1 config, kernel module.
- o Updated the pipemon debuggers.
-
- o Blocked the Multi-Port PPP from running on kernels
- 2.2.16 or greater, due to syncppp kernel module
- change.
-
-beta1-2.1.5 Nov 15 2000
- o Fixed the MultiPort PPP Support for kernels 2.2.16 and above.
- 2.2.X kernels only
-
- o Secured the driver UDP debugging calls
- - All illegal network debugging calls are reported to
- the log.
- - Defined a set of allowed commands, all other denied.
-
- o Cpipemon
- - Added set FT1 commands to the cpipemon. Thus CSU/DSU
- configuration can be performed using cpipemon.
- All systems that cannot run cfgft1 GUI utility should
- use cpipemon to configure the on board CSU/DSU.
-
-
- o Keyboard Led Monitor/Debugger
- - A new utility /usr/sbin/wpkbdmon uses keyboard leds
- to convey operational statistic information of the
- Sangoma WANPIPE cards.
- NUM_LOCK = Line State (On=connected, Off=disconnected)
- CAPS_LOCK = Tx data (On=transmitting, Off=no tx data)
- SCROLL_LOCK = Rx data (On=receiving, Off=no rx data
-
- o Hardware probe on module load and dynamic device allocation
- - During WANPIPE module load, all Sangoma cards are probed
- and found information is printed in the /var/log/messages.
- - If no cards are found, the module load fails.
- - Appropriate number of devices are dynamically loaded
- based on the number of Sangoma cards found.
-
- Note: The kernel configuration option
- CONFIG_WANPIPE_CARDS has been taken out.
-
- o Fixed the Frame Relay and Chdlc network interfaces so they are
- compatible with libpcap libraries. Meaning, tcpdump, snort,
- ethereal, and all other packet sniffers and debuggers work on
- all WANPIPE network interfaces.
- - Set the network interface encoding type to ARPHRD_PPP.
- This tell the sniffers that data obtained from the
- network interface is in pure IP format.
- Fix for 2.2.X kernels only.
-
- o True interface encoding option for Frame Relay and CHDLC
- - The above fix sets the network interface encoding
- type to ARPHRD_PPP, however some customers use
- the encoding interface type to determine the
- protocol running. Therefore, the TURE ENCODING
- option will set the interface type back to the
- original value.
-
- NOTE: If this option is used with Frame Relay and CHDLC
- libpcap library support will be broken.
- i.e. tcpdump will not work.
- Fix for 2.2.x Kernels only.
-
- o Ethernet Bridgind over Frame Relay
- - The Frame Relay bridging has been developed by
- Kristian Hoffmann and Mark Wells.
- - The Linux kernel bridge is used to send ethernet
- data over the frame relay links.
- For 2.2.X Kernels only.
-
- o Added extensive 2.0.X support. Most new features of
- 2.1.5 for protocols Frame Relay, PPP and CHDLC are
- supported under 2.0.X kernels.
-
-beta1-2.2.0 Dec 30 2000
- o Updated drivers for 2.4.X kernels.
- o Updated drivers for SMP support.
- o X25API is now able to share PCI interrupts.
- o Took out a general polling routine that was used
- only by X25API.
- o Added appropriate locks to the dynamic reconfiguration
- code.
- o Fixed a bug in the keyboard debug monitor.
-
-beta2-2.2.0 Jan 8 2001
- o Patches for 2.4.0 kernel
- o Patches for 2.2.18 kernel
- o Minor updates to PPP and CHLDC drivers.
- Note: No functional difference.
-
-beta3-2.2.9 Jan 10 2001
- o I missed the 2.2.18 kernel patches in beta2-2.2.0
- release. They are included in this release.
-
-Stable Release
-2.2.0 Feb 01 2001
- o Bug fix in wancfg GUI configurator.
- The edit function didn't work properly.
-
-
-bata1-2.2.1 Feb 09 2001
- o WANPIPE TTY Driver emulation.
- Two modes of operation Sync and Async.
- Sync: Using the PPPD daemon, kernel SyncPPP layer
- and the Wanpipe sync TTY driver: a PPP protocol
- connection can be established via Sangoma adapter, over
- a T1 leased line.
-
- The 2.4.0 kernel PPP layer supports MULTILINK
- protocol, that can be used to bundle any number of Sangoma
- adapters (T1 lines) into one, under a single IP address.
- Thus, efficiently obtaining multiple T1 throughput.
-
- NOTE: The remote side must also implement MULTILINK PPP
- protocol.
-
- Async:Using the PPPD daemon, kernel AsyncPPP layer
- and the WANPIPE async TTY driver: a PPP protocol
- connection can be established via Sangoma adapter and
- a modem, over a telephone line.
-
- Thus, the WANPIPE async TTY driver simulates a serial
- TTY driver that would normally be used to interface the
- MODEM to the linux kernel.
-
- o WANPIPE PPP Backup Utility
- This utility will monitor the state of the PPP T1 line.
- In case of failure, a dial up connection will be established
- via pppd daemon, ether via a serial tty driver (serial port),
- or a WANPIPE async TTY driver (in case serial port is unavailable).
-
- Furthermore, while in dial up mode, the primary PPP T1 link
- will be monitored for signs of life.
-
- If the PPP T1 link comes back to life, the dial up connection
- will be shutdown and T1 line re-established.
-
-
- o New Setup installation script.
- Option to UPGRADE device drivers if the kernel source has
- already been patched with WANPIPE.
-
- Option to COMPILE WANPIPE modules against the currently
- running kernel, thus no need for manual kernel and module
- re-compilation.
-
- o Updates and Bug Fixes to wancfg utility.
-
-bata2-2.2.1 Feb 20 2001
-
- o Bug fixes to the CHDLC device drivers.
- The driver had compilation problems under kernels
- 2.2.14 or lower.
-
- o Bug fixes to the Setup installation script.
- The device drivers compilation options didn't work
- properly.
-
- o Update to the wpbackupd daemon.
- Optimized the cross-over times, between the primary
- link and the backup dialup.
-
-beta3-2.2.1 Mar 02 2001
- o Patches for 2.4.2 kernel.
-
- o Bug fixes to util/ make files.
- o Bug fixes to the Setup installation script.
-
- o Took out the backupd support and made it into
- as separate package.
-
-beta4-2.2.1 Mar 12 2001
-
- o Fix to the Frame Relay Device driver.
- IPSAC sends a packet of zero length
- header to the frame relay driver. The
- driver tries to push its own 2 byte header
- into the packet, which causes the driver to
- crash.
-
- o Fix the WANPIPE re-configuration code.
- Bug was found by trying to run the cfgft1 while the
- interface was already running.
-
- o Updates to cfgft1.
- Writes a wanpipe#.cfgft1 configuration file
- once the CSU/DSU is configured. This file can
- holds the current CSU/DSU configuration.
-
-
-
->>>>>> END OF README <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 974ee8ddb12cdafa726468781ad65d06737cffc7..45b86ab45d51f52a495b1a9f3be8614ea4bfcc5a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -840,15 +840,6 @@ L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
-BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION)
-P: Larry Finger
-M: Larry.Finger@lwfinger.net
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
-L: linux-wireless@vger.kernel.org
-W: http://bcm43xx.berlios.de/
-S: Obsolete
-
BEFS FILE SYSTEM
P: Sergey S. Kostyliov
M: rathamahata@php4.ru
@@ -3479,7 +3470,7 @@ P: Vlad Yasevich
M: vladislav.yasevich@hp.com
P: Sridhar Samudrala
M: sri@us.ibm.com
-L: lksctp-developers@lists.sourceforge.net
+L: linux-sctp@vger.kernel.org
W: http://lksctp.sourceforge.net
S: Supported
@@ -3613,12 +3604,6 @@ M: mhoffman@lightlink.com
L: lm-sensors@lm-sensors.org
S: Maintained
-SOFTMAC LAYER (IEEE 802.11)
-P: Daniel Drake
-M: dsd@gentoo.org
-L: linux-wireless@vger.kernel.org
-S: Obsolete
-
SOFTWARE RAID (Multiple Disks) SUPPORT
P: Ingo Molnar
M: mingo@redhat.com
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index 969fe9f443c4f69883949e6a3b64d74cb46da8ad..3d47839a0c488c5625bb6903b68e74d31b0489e8 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -294,7 +294,7 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
return NOTIFY_DONE;
}
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
return NOTIFY_DONE;
if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index ba93d8ae9b0c8921739575e7775118bfe0cd28c8..d5770fdf7f0970701c033363f53013caa3e5b45e 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -138,7 +138,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
bus->name = "ep8248e-mdio-bitbang";
bus->dev = &ofdev->dev;
- bus->id = res.start;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
return mdiobus_register(bus);
}
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index b46542990cf8288338c34c80a169d8364e942a56..ab6955412ba49becbc14e0c4aa536dbb7121ecbd 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -241,7 +241,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
new_bus->reset = &gpio_mdio_reset;
prop = of_get_property(np, "reg", NULL);
- new_bus->id = *prop;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
new_bus->priv = priv;
new_bus->phy_mask = 0;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 2c5388ce902abfaa3fd9f400c231a3dd64735cc5..3581416905eaca520485af0cdd13e5b8b7c6935d 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -341,7 +341,7 @@ static int __init gfar_of_init(void)
goto unreg;
}
- gfar_data.bus_id = 0;
+ snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
gfar_data.phy_id = fixed_link[0];
} else {
phy = of_find_node_by_phandle(*ph);
@@ -362,7 +362,8 @@ static int __init gfar_of_init(void)
}
gfar_data.phy_id = *id;
- gfar_data.bus_id = res.start;
+ snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x",
+ res.start);
of_node_put(phy);
of_node_put(mdio);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index dcc3ec2ef643624c89d4fe94b9916ee19a23bde3..a72f208e62d07262ebf9d6e794be83e6a6db08cd 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -538,11 +538,9 @@ CONFIG_CTC=m
# CONFIG_SMSGIUCV is not set
# CONFIG_CLAW is not set
CONFIG_QETH=y
-
-#
-# Gigabit Ethernet default settings
-#
-# CONFIG_QETH_IPV6 is not set
+CONFIG_QETH_L2=y
+CONFIG_QETH_L3=y
+CONFIG_QETH_IPV6=y
CONFIG_CCWGROUP=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 7b44a5965155d7965464229c1a24dfc895439435..5aa12b011a9a6499efb5ba841f01e740975db559 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -437,7 +437,7 @@ static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * sk
/* see limitations under Hardware Features */
-static inline int check_area (void * start, size_t length) {
+static int check_area (void * start, size_t length) {
// assumes length > 0
const u32 fourmegmask = -1 << 22;
const u32 twofivesixmask = -1 << 8;
@@ -456,7 +456,7 @@ static inline int check_area (void * start, size_t length) {
/********** free an skb (as per ATM device driver documentation) **********/
-static inline void amb_kfree_skb (struct sk_buff * skb) {
+static void amb_kfree_skb (struct sk_buff * skb) {
if (ATM_SKB(skb)->vcc->pop) {
ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
} else {
@@ -466,7 +466,7 @@ static inline void amb_kfree_skb (struct sk_buff * skb) {
/********** TX completion **********/
-static inline void tx_complete (amb_dev * dev, tx_out * tx) {
+static void tx_complete (amb_dev * dev, tx_out * tx) {
tx_simple * tx_descr = bus_to_virt (tx->handle);
struct sk_buff * skb = tx_descr->skb;
@@ -643,7 +643,7 @@ static int command_do (amb_dev * dev, command * cmd) {
/********** TX queue pair **********/
-static inline int tx_give (amb_dev * dev, tx_in * tx) {
+static int tx_give (amb_dev * dev, tx_in * tx) {
amb_txq * txq = &dev->txq;
unsigned long flags;
@@ -675,7 +675,7 @@ static inline int tx_give (amb_dev * dev, tx_in * tx) {
}
}
-static inline int tx_take (amb_dev * dev) {
+static int tx_take (amb_dev * dev) {
amb_txq * txq = &dev->txq;
unsigned long flags;
@@ -703,7 +703,7 @@ static inline int tx_take (amb_dev * dev) {
/********** RX queue pairs **********/
-static inline int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
+static int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
amb_rxq * rxq = &dev->rxq[pool];
unsigned long flags;
@@ -728,7 +728,7 @@ static inline int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
}
}
-static inline int rx_take (amb_dev * dev, unsigned char pool) {
+static int rx_take (amb_dev * dev, unsigned char pool) {
amb_rxq * rxq = &dev->rxq[pool];
unsigned long flags;
@@ -761,7 +761,7 @@ static inline int rx_take (amb_dev * dev, unsigned char pool) {
/********** RX Pool handling **********/
/* pre: buffers_wanted = 0, post: pending = 0 */
-static inline void drain_rx_pool (amb_dev * dev, unsigned char pool) {
+static void drain_rx_pool (amb_dev * dev, unsigned char pool) {
amb_rxq * rxq = &dev->rxq[pool];
PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pool %p %hu", dev, pool);
@@ -796,7 +796,7 @@ static void drain_rx_pools (amb_dev * dev) {
drain_rx_pool (dev, pool);
}
-static inline void fill_rx_pool (amb_dev * dev, unsigned char pool,
+static void fill_rx_pool (amb_dev * dev, unsigned char pool,
gfp_t priority)
{
rx_in rx;
@@ -846,7 +846,7 @@ static void fill_rx_pools (amb_dev * dev) {
/********** enable host interrupts **********/
-static inline void interrupts_on (amb_dev * dev) {
+static void interrupts_on (amb_dev * dev) {
wr_plain (dev, offsetof(amb_mem, interrupt_control),
rd_plain (dev, offsetof(amb_mem, interrupt_control))
| AMB_INTERRUPT_BITS);
@@ -854,7 +854,7 @@ static inline void interrupts_on (amb_dev * dev) {
/********** disable host interrupts **********/
-static inline void interrupts_off (amb_dev * dev) {
+static void interrupts_off (amb_dev * dev) {
wr_plain (dev, offsetof(amb_mem, interrupt_control),
rd_plain (dev, offsetof(amb_mem, interrupt_control))
&~ AMB_INTERRUPT_BITS);
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 9b2cf253f02f80620dc597277b95d51f3c77400b..c0ac728dc5645ba6b5f7d2a213d9903b0a88a1e7 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -424,7 +424,7 @@ static inline void FLUSH_RX_CHANNEL (hrz_dev * dev, u16 channel) {
return;
}
-static inline void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) {
+static void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) {
while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & FLUSH_CHANNEL)
;
return;
@@ -435,7 +435,7 @@ static inline void SELECT_RX_CHANNEL (hrz_dev * dev, u16 channel) {
return;
}
-static inline void WAIT_UPDATE_COMPLETE (hrz_dev * dev) {
+static void WAIT_UPDATE_COMPLETE (hrz_dev * dev) {
while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & RX_CHANNEL_UPDATE_IN_PROGRESS)
;
return;
@@ -796,7 +796,7 @@ static void hrz_change_vc_qos (ATM_RXER * rxer, MAAL_QOS * qos) {
/********** free an skb (as per ATM device driver documentation) **********/
-static inline void hrz_kfree_skb (struct sk_buff * skb) {
+static void hrz_kfree_skb (struct sk_buff * skb) {
if (ATM_SKB(skb)->vcc->pop) {
ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
} else {
@@ -1076,7 +1076,7 @@ static void rx_schedule (hrz_dev * dev, int irq) {
/********** handle RX bus master complete events **********/
-static inline void rx_bus_master_complete_handler (hrz_dev * dev) {
+static void rx_bus_master_complete_handler (hrz_dev * dev) {
if (test_bit (rx_busy, &dev->flags)) {
rx_schedule (dev, 1);
} else {
@@ -1089,7 +1089,7 @@ static inline void rx_bus_master_complete_handler (hrz_dev * dev) {
/********** (queue to) become the next TX thread **********/
-static inline int tx_hold (hrz_dev * dev) {
+static int tx_hold (hrz_dev * dev) {
PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);
wait_event_interruptible(dev->tx_queue, (!test_and_set_bit(tx_busy, &dev->flags)));
PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);
@@ -1232,7 +1232,7 @@ static void tx_schedule (hrz_dev * const dev, int irq) {
/********** handle TX bus master complete events **********/
-static inline void tx_bus_master_complete_handler (hrz_dev * dev) {
+static void tx_bus_master_complete_handler (hrz_dev * dev) {
if (test_bit (tx_busy, &dev->flags)) {
tx_schedule (dev, 1);
} else {
@@ -1246,7 +1246,7 @@ static inline void tx_bus_master_complete_handler (hrz_dev * dev) {
/********** move RX Q pointer to next item in circular buffer **********/
// called only from IRQ sub-handler
-static inline u32 rx_queue_entry_next (hrz_dev * dev) {
+static u32 rx_queue_entry_next (hrz_dev * dev) {
u32 rx_queue_entry;
spin_lock (&dev->mem_lock);
rx_queue_entry = rd_mem (dev, &dev->rx_q_entry->entry);
@@ -1270,7 +1270,7 @@ static inline void rx_disabled_handler (hrz_dev * dev) {
/********** handle RX data received by device **********/
// called from IRQ handler
-static inline void rx_data_av_handler (hrz_dev * dev) {
+static void rx_data_av_handler (hrz_dev * dev) {
u32 rx_queue_entry;
u32 rx_queue_entry_flags;
u16 rx_len;
@@ -1394,7 +1394,7 @@ static irqreturn_t interrupt_handler(int irq, void *dev_id)
irq_ok = 0;
while ((int_source = rd_regl (dev, INT_SOURCE_REG_OFF)
& INTERESTING_INTERRUPTS)) {
- // In the interests of fairness, the (inline) handlers below are
+ // In the interests of fairness, the handlers below are
// called in sequence and without immediate return to the head of
// the while loop. This is only of issue for slow hosts (or when
// debugging messages are on). Really slow hosts may find a fast
@@ -1458,7 +1458,7 @@ static void do_housekeeping (unsigned long arg) {
/********** find an idle channel for TX and set it up **********/
// called with tx_busy set
-static inline short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) {
+static short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) {
unsigned short idle_channels;
short tx_channel = -1;
unsigned int spin_count;
@@ -1777,13 +1777,13 @@ static void hrz_reset (const hrz_dev * dev) {
/********** read the burnt in address **********/
-static inline void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl)
+static void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl)
{
wr_regl (dev, CONTROL_0_REG, ctrl);
udelay (5);
}
-static inline void CLOCK_IT (const hrz_dev *dev, u32 ctrl)
+static void CLOCK_IT (const hrz_dev *dev, u32 ctrl)
{
// DI must be valid around rising SK edge
WRITE_IT_WAIT(dev, ctrl & ~SEEPROM_SK);
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 8460ef736d560405318a62d7737f8afdc1db9ece..18d243c73eee0b34966a1a4eea6da1e673ece772 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -115,7 +115,7 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
struct aoe_hdr *h;
u32 n;
- if (ifp->nd_net != &init_net)
+ if (dev_net(ifp) != &init_net)
goto exit;
skb = skb_share_check(skb, GFP_ATOMIC);
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 8fafac987e0bea25df8b53d562a4b8dbc19c763a..54dac0696d9117de35338e5dc5bbb61048d970f9 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -54,25 +54,24 @@
v1.19a 28Oct2002 Davud Ruggiero
- Increase *read_eeprom udelay to workaround oops with 2 cards.
v1.19b 08Nov2002 Marc Zyngier
- - Introduce driver model for EISA cards.
+ - Introduce driver model for EISA cards.
+ v1.20 04Feb2008 Ondrej Zary
+ - convert to isa_driver and pnp_driver and some cleanups
*/
#define DRV_NAME "3c509"
-#define DRV_VERSION "1.19b"
-#define DRV_RELDATE "08Nov2002"
+#define DRV_VERSION "1.20"
+#define DRV_RELDATE "04Feb2008"
/* A few values that may be tweaked. */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (400*HZ/1000)
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 10;
#include
-#ifdef CONFIG_MCA
#include
-#endif
-#include
+#include
+#include
#include
#include
#include
@@ -97,10 +96,6 @@ static int max_interrupt_work = 10;
static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
-#if defined(CONFIG_PM) && (defined(CONFIG_MCA) || defined(CONFIG_EISA))
-#define EL3_SUSPEND
-#endif
-
#ifdef EL3_DEBUG
static int el3_debug = EL3_DEBUG;
#else
@@ -111,6 +106,7 @@ static int el3_debug = 2;
* a global variable so that the mca/eisa probe routines can increment
* it */
static int el3_cards = 0;
+#define EL3_MAX_CARDS 8
/* To minimize the size of the driver source I only define operating
constants if they are used several times. You'll need the manual
@@ -119,7 +115,7 @@ static int el3_cards = 0;
#define EL3_DATA 0x00
#define EL3_CMD 0x0e
#define EL3_STATUS 0x0e
-#define EEPROM_READ 0x80
+#define EEPROM_READ 0x80
#define EL3_IO_EXTENT 16
@@ -168,23 +164,31 @@ enum RxFilter {
*/
#define SKB_QUEUE_SIZE 64
+enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_MCA, EL3_EISA };
+
struct el3_private {
struct net_device_stats stats;
- struct net_device *next_dev;
spinlock_t lock;
/* skb send-queue */
int head, size;
struct sk_buff *queue[SKB_QUEUE_SIZE];
- enum {
- EL3_MCA,
- EL3_PNP,
- EL3_EISA,
- } type; /* type of device */
- struct device *dev;
+ enum el3_cardtype type;
};
-static int id_port __initdata = 0x110; /* Start with 0x110 to avoid new sound cards.*/
-static struct net_device *el3_root_dev;
+static int id_port;
+static int current_tag;
+static struct net_device *el3_devs[EL3_MAX_CARDS];
+
+/* Parameters that may be passed into the module. */
+static int debug = -1;
+static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 10;
+#ifdef CONFIG_PNP
+static int nopnp;
+#endif
+static int __init el3_common_init(struct net_device *dev);
+static void el3_common_remove(struct net_device *dev);
static ushort id_read_eeprom(int index);
static ushort read_eeprom(int ioaddr, int index);
static int el3_open(struct net_device *dev);
@@ -199,7 +203,7 @@ static void el3_tx_timeout (struct net_device *dev);
static void el3_down(struct net_device *dev);
static void el3_up(struct net_device *dev);
static const struct ethtool_ops ethtool_ops;
-#ifdef EL3_SUSPEND
+#ifdef CONFIG_PM
static int el3_suspend(struct device *, pm_message_t);
static int el3_resume(struct device *);
#else
@@ -209,13 +213,272 @@ static int el3_resume(struct device *);
/* generic device remove for all device types */
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
static int el3_device_remove (struct device *device);
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
static void el3_poll_controller(struct net_device *dev);
#endif
+/* Return 0 on success, 1 on error, 2 when found already detected PnP card */
+static int el3_isa_id_sequence(__be16 *phys_addr)
+{
+ short lrs_state = 0xff;
+ int i;
+
+ /* ISA boards are detected by sending the ID sequence to the
+ ID_PORT. We find cards past the first by setting the 'current_tag'
+ on cards as they are found. Cards with their tag set will not
+ respond to subsequent ID sequences. */
+
+ outb(0x00, id_port);
+ outb(0x00, id_port);
+ for (i = 0; i < 255; i++) {
+ outb(lrs_state, id_port);
+ lrs_state <<= 1;
+ lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
+ }
+ /* For the first probe, clear all board's tag registers. */
+ if (current_tag == 0)
+ outb(0xd0, id_port);
+ else /* Otherwise kill off already-found boards. */
+ outb(0xd8, id_port);
+ if (id_read_eeprom(7) != 0x6d50)
+ return 1;
+ /* Read in EEPROM data, which does contention-select.
+ Only the lowest address board will stay "on-line".
+ 3Com got the byte order backwards. */
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(id_read_eeprom(i));
+#ifdef CONFIG_PNP
+ if (!nopnp) {
+ /* The ISA PnP 3c509 cards respond to the ID sequence too.
+ This check is needed in order not to register them twice. */
+ for (i = 0; i < el3_cards; i++) {
+ struct el3_private *lp = netdev_priv(el3_devs[i]);
+ if (lp->type == EL3_PNP
+ && !memcmp(phys_addr, el3_devs[i]->dev_addr,
+ ETH_ALEN)) {
+ if (el3_debug > 3)
+ printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+ phys_addr[0] & 0xff, phys_addr[0] >> 8,
+ phys_addr[1] & 0xff, phys_addr[1] >> 8,
+ phys_addr[2] & 0xff, phys_addr[2] >> 8);
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+ return 2;
+ }
+ }
+ }
+#endif /* CONFIG_PNP */
+ return 0;
+
+}
+
+static void __devinit el3_dev_fill(struct net_device *dev, __be16 *phys_addr,
+ int ioaddr, int irq, int if_port,
+ enum el3_cardtype type)
+{
+ struct el3_private *lp = netdev_priv(dev);
+
+ memcpy(dev->dev_addr, phys_addr, ETH_ALEN);
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->if_port = if_port;
+ lp->type = type;
+}
+
+static int __devinit el3_isa_match(struct device *pdev,
+ unsigned int ndev)
+{
+ struct net_device *dev;
+ int ioaddr, isa_irq, if_port, err;
+ unsigned int iobase;
+ __be16 phys_addr[3];
+
+ while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+ ; /* Skip to next card when PnP card found */
+ if (err == 1)
+ return 0;
+
+ iobase = id_read_eeprom(8);
+ if_port = iobase >> 14;
+ ioaddr = 0x200 + ((iobase & 0x1f) << 4);
+ if (irq[el3_cards] > 1 && irq[el3_cards] < 16)
+ isa_irq = irq[el3_cards];
+ else
+ isa_irq = id_read_eeprom(9) >> 12;
+
+ dev = alloc_etherdev(sizeof(struct el3_private));
+ if (!dev)
+ return -ENOMEM;
+
+ netdev_boot_setup_check(dev);
+
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+
+ /* Activate the adaptor at the EEPROM location. */
+ outb((ioaddr >> 4) | 0xe0, id_port);
+
+ EL3WINDOW(0);
+ if (inw(ioaddr) != 0x6d50) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ /* Free the interrupt so that some other card can use it. */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+
+ el3_dev_fill(dev, phys_addr, ioaddr, isa_irq, if_port, EL3_ISA);
+ dev_set_drvdata(pdev, dev);
+ if (el3_common_init(dev)) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ el3_devs[el3_cards++] = dev;
+ return 1;
+}
+
+static int __devexit el3_isa_remove(struct device *pdev,
+ unsigned int ndev)
+{
+ el3_device_remove(pdev);
+ dev_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int el3_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
+{
+ current_tag = 0;
+ return el3_suspend(dev, state);
+}
+
+static int el3_isa_resume(struct device *dev, unsigned int n)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ int ioaddr = ndev->base_addr, err;
+ __be16 phys_addr[3];
+
+ while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+ ; /* Skip to next card when PnP card found */
+ if (err == 1)
+ return 0;
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+ /* Enable the card */
+ outb((ioaddr >> 4) | 0xe0, id_port);
+ EL3WINDOW(0);
+ if (inw(ioaddr) != 0x6d50)
+ return 1;
+ /* Free the interrupt so that some other card can use it. */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+ return el3_resume(dev);
+}
+#endif
+
+static struct isa_driver el3_isa_driver = {
+ .match = el3_isa_match,
+ .remove = __devexit_p(el3_isa_remove),
+#ifdef CONFIG_PM
+ .suspend = el3_isa_suspend,
+ .resume = el3_isa_resume,
+#endif
+ .driver = {
+ .name = "3c509"
+ },
+};
+static int isa_registered;
+
+#ifdef CONFIG_PNP
+static struct pnp_device_id el3_pnp_ids[] = {
+ { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */
+ { .id = "TCM5091" }, /* 3Com Etherlink III */
+ { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */
+ { .id = "TCM5095" }, /* 3Com Etherlink III (TPO) */
+ { .id = "TCM5098" }, /* 3Com Etherlink III (TPC) */
+ { .id = "PNP80f7" }, /* 3Com Etherlink III compatible */
+ { .id = "PNP80f8" }, /* 3Com Etherlink III compatible */
+ { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, el3_pnp_ids);
+
+static int __devinit el3_pnp_probe(struct pnp_dev *pdev,
+ const struct pnp_device_id *id)
+{
+ short i;
+ int ioaddr, irq, if_port;
+ u16 phys_addr[3];
+ struct net_device *dev = NULL;
+ int err;
+
+ ioaddr = pnp_port_start(pdev, 0);
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-pnp"))
+ return -EBUSY;
+ irq = pnp_irq(pdev, 0);
+ EL3WINDOW(0);
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+ if_port = read_eeprom(ioaddr, 8) >> 14;
+ dev = alloc_etherdev(sizeof(struct el3_private));
+ if (!dev) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ netdev_boot_setup_check(dev);
+
+ el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP);
+ pnp_set_drvdata(pdev, dev);
+ err = el3_common_init(dev);
+
+ if (err) {
+ pnp_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+ return err;
+ }
+
+ el3_devs[el3_cards++] = dev;
+ return 0;
+}
+
+static void __devexit el3_pnp_remove(struct pnp_dev *pdev)
+{
+ el3_common_remove(pnp_get_drvdata(pdev));
+ pnp_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int el3_pnp_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+ return el3_suspend(&pdev->dev, state);
+}
+
+static int el3_pnp_resume(struct pnp_dev *pdev)
+{
+ return el3_resume(&pdev->dev);
+}
+#endif
+
+static struct pnp_driver el3_pnp_driver = {
+ .name = "3c509",
+ .id_table = el3_pnp_ids,
+ .probe = el3_pnp_probe,
+ .remove = __devexit_p(el3_pnp_remove),
+#ifdef CONFIG_PM
+ .suspend = el3_pnp_suspend,
+ .resume = el3_pnp_resume,
+#endif
+};
+static int pnp_registered;
+#endif /* CONFIG_PNP */
+
#ifdef CONFIG_EISA
static struct eisa_device_id el3_eisa_ids[] = {
{ "TCM5092" },
@@ -230,13 +493,14 @@ static int el3_eisa_probe (struct device *device);
static struct eisa_driver el3_eisa_driver = {
.id_table = el3_eisa_ids,
.driver = {
- .name = "3c509",
+ .name = "3c579",
.probe = el3_eisa_probe,
.remove = __devexit_p (el3_device_remove),
.suspend = el3_suspend,
.resume = el3_resume,
}
};
+static int eisa_registered;
#endif
#ifdef CONFIG_MCA
@@ -271,45 +535,9 @@ static struct mca_driver el3_mca_driver = {
.resume = el3_resume,
},
};
+static int mca_registered;
#endif /* CONFIG_MCA */
-#if defined(__ISAPNP__)
-static struct isapnp_device_id el3_isapnp_adapters[] __initdata = {
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090),
- (long) "3Com Etherlink III (TP)" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5091),
- (long) "3Com Etherlink III" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5094),
- (long) "3Com Etherlink III (combo)" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5095),
- (long) "3Com Etherlink III (TPO)" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5098),
- (long) "3Com Etherlink III (TPC)" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f7),
- (long) "3Com Etherlink III compatible" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f8),
- (long) "3Com Etherlink III compatible" },
- { } /* terminate list */
-};
-
-static __be16 el3_isapnp_phys_addr[8][3];
-static int nopnp;
-#endif /* __ISAPNP__ */
-
-/* With the driver model introduction for EISA devices, both init
- * and cleanup have been split :
- * - EISA devices probe/remove starts in el3_eisa_probe/el3_device_remove
- * - MCA/ISA still use el3_probe
- *
- * Both call el3_common_init/el3_common_remove. */
-
static int __init el3_common_init(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
@@ -360,231 +588,11 @@ static int __init el3_common_init(struct net_device *dev)
static void el3_common_remove (struct net_device *dev)
{
- struct el3_private *lp = netdev_priv(dev);
-
- (void) lp; /* Keep gcc quiet... */
-#if defined(__ISAPNP__)
- if (lp->type == EL3_PNP)
- pnp_device_detach(to_pnp_dev(lp->dev));
-#endif
-
unregister_netdev (dev);
release_region(dev->base_addr, EL3_IO_EXTENT);
free_netdev (dev);
}
-static int __init el3_probe(int card_idx)
-{
- struct net_device *dev;
- struct el3_private *lp;
- short lrs_state = 0xff, i;
- int ioaddr, irq, if_port;
- __be16 phys_addr[3];
- static int current_tag;
- int err = -ENODEV;
-#if defined(__ISAPNP__)
- static int pnp_cards;
- struct pnp_dev *idev = NULL;
- int pnp_found = 0;
-
- if (nopnp == 1)
- goto no_pnp;
-
- for (i=0; el3_isapnp_adapters[i].vendor != 0; i++) {
- int j;
- while ((idev = pnp_find_dev(NULL,
- el3_isapnp_adapters[i].vendor,
- el3_isapnp_adapters[i].function,
- idev))) {
- if (pnp_device_attach(idev) < 0)
- continue;
- if (pnp_activate_dev(idev) < 0) {
-__again:
- pnp_device_detach(idev);
- continue;
- }
- if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0))
- goto __again;
- ioaddr = pnp_port_start(idev, 0);
- if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509 PnP")) {
- pnp_device_detach(idev);
- return -EBUSY;
- }
- irq = pnp_irq(idev, 0);
- if (el3_debug > 3)
- printk ("ISAPnP reports %s at i/o 0x%x, irq %d\n",
- (char*) el3_isapnp_adapters[i].driver_data, ioaddr, irq);
- EL3WINDOW(0);
- for (j = 0; j < 3; j++)
- el3_isapnp_phys_addr[pnp_cards][j] =
- phys_addr[j] =
- htons(read_eeprom(ioaddr, j));
- if_port = read_eeprom(ioaddr, 8) >> 14;
- dev = alloc_etherdev(sizeof (struct el3_private));
- if (!dev) {
- release_region(ioaddr, EL3_IO_EXTENT);
- pnp_device_detach(idev);
- return -ENOMEM;
- }
-
- SET_NETDEV_DEV(dev, &idev->dev);
- pnp_cards++;
-
- netdev_boot_setup_check(dev);
- pnp_found = 1;
- goto found;
- }
- }
-no_pnp:
-#endif /* __ISAPNP__ */
-
- /* Select an open I/O location at 0x1*0 to do contention select. */
- for ( ; id_port < 0x200; id_port += 0x10) {
- if (!request_region(id_port, 1, "3c509"))
- continue;
- outb(0x00, id_port);
- outb(0xff, id_port);
- if (inb(id_port) & 0x01){
- release_region(id_port, 1);
- break;
- } else
- release_region(id_port, 1);
- }
- if (id_port >= 0x200) {
- /* Rare -- do we really need a warning? */
- printk(" WARNING: No I/O port available for 3c509 activation.\n");
- return -ENODEV;
- }
-
- /* Next check for all ISA bus boards by sending the ID sequence to the
- ID_PORT. We find cards past the first by setting the 'current_tag'
- on cards as they are found. Cards with their tag set will not
- respond to subsequent ID sequences. */
-
- outb(0x00, id_port);
- outb(0x00, id_port);
- for(i = 0; i < 255; i++) {
- outb(lrs_state, id_port);
- lrs_state <<= 1;
- lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
- }
-
- /* For the first probe, clear all board's tag registers. */
- if (current_tag == 0)
- outb(0xd0, id_port);
- else /* Otherwise kill off already-found boards. */
- outb(0xd8, id_port);
-
- if (id_read_eeprom(7) != 0x6d50) {
- return -ENODEV;
- }
-
- /* Read in EEPROM data, which does contention-select.
- Only the lowest address board will stay "on-line".
- 3Com got the byte order backwards. */
- for (i = 0; i < 3; i++) {
- phys_addr[i] = htons(id_read_eeprom(i));
- }
-
-#if defined(__ISAPNP__)
- if (nopnp == 0) {
- /* The ISA PnP 3c509 cards respond to the ID sequence.
- This check is needed in order not to register them twice. */
- for (i = 0; i < pnp_cards; i++) {
- if (phys_addr[0] == el3_isapnp_phys_addr[i][0] &&
- phys_addr[1] == el3_isapnp_phys_addr[i][1] &&
- phys_addr[2] == el3_isapnp_phys_addr[i][2])
- {
- if (el3_debug > 3)
- printk("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
- phys_addr[0] & 0xff, phys_addr[0] >> 8,
- phys_addr[1] & 0xff, phys_addr[1] >> 8,
- phys_addr[2] & 0xff, phys_addr[2] >> 8);
- /* Set the adaptor tag so that the next card can be found. */
- outb(0xd0 + ++current_tag, id_port);
- goto no_pnp;
- }
- }
- }
-#endif /* __ISAPNP__ */
-
- {
- unsigned int iobase = id_read_eeprom(8);
- if_port = iobase >> 14;
- ioaddr = 0x200 + ((iobase & 0x1f) << 4);
- }
- irq = id_read_eeprom(9) >> 12;
-
- dev = alloc_etherdev(sizeof (struct el3_private));
- if (!dev)
- return -ENOMEM;
-
- netdev_boot_setup_check(dev);
-
- /* Set passed-in IRQ or I/O Addr. */
- if (dev->irq > 1 && dev->irq < 16)
- irq = dev->irq;
-
- if (dev->base_addr) {
- if (dev->mem_end == 0x3c509 /* Magic key */
- && dev->base_addr >= 0x200 && dev->base_addr <= 0x3e0)
- ioaddr = dev->base_addr & 0x3f0;
- else if (dev->base_addr != ioaddr)
- goto out;
- }
-
- if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509")) {
- err = -EBUSY;
- goto out;
- }
-
- /* Set the adaptor tag so that the next card can be found. */
- outb(0xd0 + ++current_tag, id_port);
-
- /* Activate the adaptor at the EEPROM location. */
- outb((ioaddr >> 4) | 0xe0, id_port);
-
- EL3WINDOW(0);
- if (inw(ioaddr) != 0x6d50)
- goto out1;
-
- /* Free the interrupt so that some other card can use it. */
- outw(0x0f00, ioaddr + WN0_IRQ);
-
-#if defined(__ISAPNP__)
- found: /* PNP jumps here... */
-#endif /* __ISAPNP__ */
-
- memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
- dev->base_addr = ioaddr;
- dev->irq = irq;
- dev->if_port = if_port;
- lp = netdev_priv(dev);
-#if defined(__ISAPNP__)
- lp->dev = &idev->dev;
- if (pnp_found)
- lp->type = EL3_PNP;
-#endif
- err = el3_common_init(dev);
-
- if (err)
- goto out1;
-
- el3_cards++;
- lp->next_dev = el3_root_dev;
- el3_root_dev = dev;
- return 0;
-
-out1:
-#if defined(__ISAPNP__)
- if (idev)
- pnp_device_detach(idev);
-#endif
-out:
- free_netdev(dev);
- return err;
-}
-
#ifdef CONFIG_MCA
static int __init el3_mca_probe(struct device *device)
{
@@ -596,7 +604,6 @@ static int __init el3_mca_probe(struct device *device)
* redone for multi-card detection by ZP Gu (zpg@castle.net)
* now works as a module */
- struct el3_private *lp;
short i;
int ioaddr, irq, if_port;
u16 phys_addr[3];
@@ -613,7 +620,7 @@ static int __init el3_mca_probe(struct device *device)
irq = pos5 & 0x0f;
- printk("3c529: found %s at slot %d\n",
+ printk(KERN_INFO "3c529: found %s at slot %d\n",
el3_mca_adapter_names[mdev->index], slot + 1);
/* claim the slot */
@@ -626,7 +633,7 @@ static int __init el3_mca_probe(struct device *device)
irq = mca_device_transform_irq(mdev, irq);
ioaddr = mca_device_transform_ioport(mdev, ioaddr);
if (el3_debug > 2) {
- printk("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
+ printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
EL3WINDOW(0);
for (i = 0; i < 3; i++) {
@@ -641,13 +648,7 @@ static int __init el3_mca_probe(struct device *device)
netdev_boot_setup_check(dev);
- memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
- dev->base_addr = ioaddr;
- dev->irq = irq;
- dev->if_port = if_port;
- lp = netdev_priv(dev);
- lp->dev = device;
- lp->type = EL3_MCA;
+ el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_MCA);
device->driver_data = dev;
err = el3_common_init(dev);
@@ -657,7 +658,7 @@ static int __init el3_mca_probe(struct device *device)
return -ENOMEM;
}
- el3_cards++;
+ el3_devs[el3_cards++] = dev;
return 0;
}
@@ -666,7 +667,6 @@ static int __init el3_mca_probe(struct device *device)
#ifdef CONFIG_EISA
static int __init el3_eisa_probe (struct device *device)
{
- struct el3_private *lp;
short i;
int ioaddr, irq, if_port;
u16 phys_addr[3];
@@ -678,7 +678,7 @@ static int __init el3_eisa_probe (struct device *device)
edev = to_eisa_device (device);
ioaddr = edev->base_addr;
- if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa"))
return -EBUSY;
/* Change the register set to the configuration window 0. */
@@ -700,13 +700,7 @@ static int __init el3_eisa_probe (struct device *device)
netdev_boot_setup_check(dev);
- memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
- dev->base_addr = ioaddr;
- dev->irq = irq;
- dev->if_port = if_port;
- lp = netdev_priv(dev);
- lp->dev = device;
- lp->type = EL3_EISA;
+ el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA);
eisa_set_drvdata (edev, dev);
err = el3_common_init(dev);
@@ -716,12 +710,11 @@ static int __init el3_eisa_probe (struct device *device)
return err;
}
- el3_cards++;
+ el3_devs[el3_cards++] = dev;
return 0;
}
#endif
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/* This remove works for all device types.
*
* The net dev must be stored in the driver_data field */
@@ -734,7 +727,6 @@ static int __devexit el3_device_remove (struct device *device)
el3_common_remove (dev);
return 0;
}
-#endif
/* Read a word from the EEPROM using the regular EEPROM access register.
Assume that we are in register window zero.
@@ -749,7 +741,7 @@ static ushort read_eeprom(int ioaddr, int index)
}
/* Read a word from the EEPROM when in the ISA ID probe state. */
-static ushort __init id_read_eeprom(int index)
+static ushort id_read_eeprom(int index)
{
int bit, word = 0;
@@ -765,7 +757,7 @@ static ushort __init id_read_eeprom(int index)
word = (word << 1) + (inb(id_port) & 0x01);
if (el3_debug > 3)
- printk(" 3c509 EEPROM word %d %#4.4x.\n", index, word);
+ printk(KERN_DEBUG " 3c509 EEPROM word %d %#4.4x.\n", index, word);
return word;
}
@@ -787,13 +779,13 @@ el3_open(struct net_device *dev)
EL3WINDOW(0);
if (el3_debug > 3)
- printk("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
+ printk(KERN_DEBUG "%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
el3_up(dev);
if (el3_debug > 3)
- printk("%s: Opened 3c509 IRQ %d status %4.4x.\n",
+ printk(KERN_DEBUG "%s: Opened 3c509 IRQ %d status %4.4x.\n",
dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
return 0;
@@ -806,7 +798,7 @@ el3_tx_timeout (struct net_device *dev)
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
- printk("%s: transmit timed out, Tx_status %2.2x status %4.4x "
+ printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x "
"Tx FIFO room %d.\n",
dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
inw(ioaddr + TX_FREE));
@@ -831,7 +823,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
lp->stats.tx_bytes += skb->len;
if (el3_debug > 4) {
- printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+ printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
dev->name, skb->len, inw(ioaddr + EL3_STATUS));
}
#if 0
@@ -840,7 +832,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
ushort status = inw(ioaddr + EL3_STATUS);
if (status & 0x0001 /* IRQ line active, missed one. */
&& inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */
- printk("%s: Missed interrupt, status then %04x now %04x"
+ printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x"
" Tx %2.2x Rx %4.4x.\n", dev->name, status,
inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
inw(ioaddr + RX_STATUS));
@@ -914,7 +906,7 @@ el3_interrupt(int irq, void *dev_id)
if (el3_debug > 4) {
status = inw(ioaddr + EL3_STATUS);
- printk("%s: interrupt, status %4.4x.\n", dev->name, status);
+ printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);
}
while ((status = inw(ioaddr + EL3_STATUS)) &
@@ -925,7 +917,7 @@ el3_interrupt(int irq, void *dev_id)
if (status & TxAvailable) {
if (el3_debug > 5)
- printk(" TX room bit was handled.\n");
+ printk(KERN_DEBUG " TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue (dev);
@@ -964,7 +956,7 @@ el3_interrupt(int irq, void *dev_id)
}
if (--i < 0) {
- printk("%s: Infinite loop in interrupt, status %4.4x.\n",
+ printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",
dev->name, status);
/* Clear all interrupts. */
outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -975,7 +967,7 @@ el3_interrupt(int irq, void *dev_id)
}
if (el3_debug > 4) {
- printk("%s: exiting interrupt, status %4.4x.\n", dev->name,
+ printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,
inw(ioaddr + EL3_STATUS));
}
spin_unlock(&lp->lock);
@@ -1450,7 +1442,7 @@ el3_up(struct net_device *dev)
}
/* Power Management support functions */
-#ifdef EL3_SUSPEND
+#ifdef CONFIG_PM
static int
el3_suspend(struct device *pdev, pm_message_t state)
@@ -1500,79 +1492,102 @@ el3_resume(struct device *pdev)
return 0;
}
-#endif /* EL3_SUSPEND */
-
-/* Parameters that may be passed into the module. */
-static int debug = -1;
-static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int xcvr[] = {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1};
+#endif /* CONFIG_PM */
module_param(debug,int, 0);
module_param_array(irq, int, NULL, 0);
-module_param_array(xcvr, int, NULL, 0);
module_param(max_interrupt_work, int, 0);
MODULE_PARM_DESC(debug, "debug level (0-6)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)");
MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
-#if defined(__ISAPNP__)
+#ifdef CONFIG_PNP
module_param(nopnp, int, 0);
MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
-MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
-#endif /* __ISAPNP__ */
-MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B) ISA/PnP ethernet driver");
+#endif /* CONFIG_PNP */
+MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B, 3c529, 3c579) ethernet driver");
MODULE_LICENSE("GPL");
static int __init el3_init_module(void)
{
int ret = 0;
- el3_cards = 0;
if (debug >= 0)
el3_debug = debug;
- el3_root_dev = NULL;
- while (el3_probe(el3_cards) == 0) {
- if (irq[el3_cards] > 1)
- el3_root_dev->irq = irq[el3_cards];
- if (xcvr[el3_cards] >= 0)
- el3_root_dev->if_port = xcvr[el3_cards];
- el3_cards++;
+#ifdef CONFIG_PNP
+ if (!nopnp) {
+ ret = pnp_register_driver(&el3_pnp_driver);
+ if (!ret)
+ pnp_registered = 1;
+ }
+#endif
+ /* Select an open I/O location at 0x1*0 to do ISA contention select. */
+ /* Start with 0x110 to avoid some sound cards.*/
+ for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) {
+ if (!request_region(id_port, 1, "3c509-control"))
+ continue;
+ outb(0x00, id_port);
+ outb(0xff, id_port);
+ if (inb(id_port) & 0x01)
+ break;
+ else
+ release_region(id_port, 1);
+ }
+ if (id_port >= 0x200) {
+ id_port = 0;
+ printk(KERN_ERR "No I/O port available for 3c509 activation.\n");
+ } else {
+ ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
+ if (!ret)
+ isa_registered = 1;
}
-
#ifdef CONFIG_EISA
ret = eisa_driver_register(&el3_eisa_driver);
+ if (!ret)
+ eisa_registered = 1;
#endif
#ifdef CONFIG_MCA
- {
- int err = mca_register_driver(&el3_mca_driver);
- if (ret == 0)
- ret = err;
- }
+ ret = mca_register_driver(&el3_mca_driver);
+ if (!ret)
+ mca_registered = 1;
+#endif
+
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ ret = 0;
+#endif
+ if (isa_registered)
+ ret = 0;
+#ifdef CONFIG_EISA
+ if (eisa_registered)
+ ret = 0;
+#endif
+#ifdef CONFIG_MCA
+ if (mca_registered)
+ ret = 0;
#endif
return ret;
}
static void __exit el3_cleanup_module(void)
{
- struct net_device *next_dev;
-
- while (el3_root_dev) {
- struct el3_private *lp = netdev_priv(el3_root_dev);
-
- next_dev = lp->next_dev;
- el3_common_remove (el3_root_dev);
- el3_root_dev = next_dev;
- }
-
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_driver(&el3_pnp_driver);
+#endif
+ if (isa_registered)
+ isa_unregister_driver(&el3_isa_driver);
+ if (id_port)
+ release_region(id_port, 1);
#ifdef CONFIG_EISA
- eisa_driver_unregister (&el3_eisa_driver);
+ if (eisa_registered)
+ eisa_driver_unregister(&el3_eisa_driver);
#endif
#ifdef CONFIG_MCA
- mca_unregister_driver(&el3_mca_driver);
+ if (mca_registered)
+ mca_unregister_driver(&el3_mca_driver);
#endif
}
module_init (el3_init_module);
module_exit (el3_cleanup_module);
-
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index be6e918456d96e38a333e8f2cd72610a67bdd05d..53bd903d2321c770cf9ad18dca6559712f86e51c 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -966,8 +966,8 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
for (i = 0; i < 3; i++)
- ((u16 *) (dev->dev_addr))[i] =
- le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* The Rtl8139-specific entries in the device structure. */
@@ -1373,8 +1373,8 @@ static void rtl8139_hw_start (struct net_device *dev)
/* unlock Config[01234] and BMCR register writes */
RTL_W8_F (Cfg9346, Cfg9346_Unlock);
/* Restore our idea of the MAC address. */
- RTL_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
- RTL_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
/* Must enable Tx/Rx before setting transfer thresholds! */
RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
@@ -1945,7 +1945,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
rmb();
/* read size+status of next frame from DMA ring buffer */
- rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
rx_size = rx_status >> 16;
pkt_size = rx_size - 4;
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index a82807641dcf865a6f269692d4d2eddedfab64e2..a499e867f0f456ea60fb246b2ecdbb04d465b150 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -48,14 +48,16 @@ EXPORT_SYMBOL(__alloc_ei_netdev);
#if defined(MODULE)
-int init_module(void)
+static int __init ns8390_module_init(void)
{
return 0;
}
-void cleanup_module(void)
+static void __exit ns8390_module_exit(void)
{
}
+module_init(ns8390_module_init);
+module_exit(ns8390_module_exit);
#endif /* MODULE */
MODULE_LICENSE("GPL");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3a0b20afec7b1b4b1c88a2ed4c9092975b5db6c5..45c3a208d93f081acd67743e77e304310c39ffd5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -467,6 +467,13 @@ config SNI_82596
Say Y here to support the on-board Intel 82596 ethernet controller
built into SNI RM machines.
+config KORINA
+ tristate "Korina (IDT RC32434) Ethernet support"
+ depends on NET_ETHERNET && MIKROTIK_RB500
+ help
+ If you have a Mikrotik RouterBoard 500 or IDT RC32434
+ based system say Y. Otherwise say N.
+
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
depends on MACH_JAZZ
@@ -1431,7 +1438,7 @@ config CS89x0
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on NET_PCI && PCI && MIPS
- select MII
+ select PHYLIB
config EEPRO100
tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
@@ -2220,93 +2227,6 @@ config SKY2_DEBUG
If unsure, say N.
-config SK98LIN
- tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
- depends on PCI
- ---help---
- Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
- compliant Gigabit Ethernet Adapter.
-
- This driver supports the original Yukon chipset. This driver is
- deprecated and will be removed from the kernel in the near future,
- it has been replaced by the skge driver. skge is cleaner and
- seems to work better.
-
- This driver does not support the newer Yukon2 chipset. A separate
- driver, sky2, is provided to support Yukon2-based adapters.
-
- The following adapters are supported by this driver:
- - 3Com 3C940 Gigabit LOM Ethernet Adapter
- - 3Com 3C941 Gigabit LOM Ethernet Adapter
- - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
- - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
- - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
- - EG1032 v2 Instant Gigabit Network Adapter
- - EG1064 v2 Instant Gigabit Network Adapter
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
- - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
- - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
- - Marvell RDK-8001 Adapter
- - Marvell RDK-8002 Adapter
- - Marvell RDK-8003 Adapter
- - Marvell RDK-8004 Adapter
- - Marvell RDK-8006 Adapter
- - Marvell RDK-8007 Adapter
- - Marvell RDK-8008 Adapter
- - Marvell RDK-8009 Adapter
- - Marvell RDK-8010 Adapter
- - Marvell RDK-8011 Adapter
- - Marvell RDK-8012 Adapter
- - Marvell RDK-8052 Adapter
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
- - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
- - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
- - SK-9521 10/100/1000Base-T Adapter
- - SK-9521 V2.0 10/100/1000Base-T Adapter
- - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
- - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
- - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
- - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
- - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
- - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
- - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
- - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
- - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
- - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
- - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
- - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
- - SMC EZ Card 1000 (SMC9452TXV.2)
-
- The adapters support Jumbo Frames.
- The dual link adapters support link-failover and dual port features.
- Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
- the scatter-gather functionality with sendfile(). Please refer to
- for more information about
- optional driver parameters.
- Questions concerning this driver may be addressed to:
-
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read . The module will
- be called sk98lin. This is recommended.
-
config VIA_VELOCITY
tristate "VIA Velocity support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3b1ea321dc056624d924c20ec4a7375b4ede88a7..4d71729e85e51bbfb285407bca388e988239b448 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_ATL1) += atl1/
+obj-$(CONFIG_ATL1) += atlx/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_TEHUTI) += tehuti.o
@@ -75,7 +75,6 @@ ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SKY2) += sky2.o
-obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
@@ -191,6 +190,7 @@ obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
+obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 92c3a4cf0bb18d15c83a3ce5f7206a34172514d1..65b901ebfd621de68c7cb7e45dce2b7480d93c8b 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -1010,7 +1010,7 @@ module_param(io, int, 0);
module_param(irq, int, 0);
module_param(board_type, int, 0);
-int __init init_module(void)
+static int __init cops_module_init(void)
{
if (io == 0)
printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n",
@@ -1021,12 +1021,14 @@ int __init init_module(void)
return 0;
}
-void __exit cleanup_module(void)
+static void __exit cops_module_exit(void)
{
unregister_netdev(cops_dev);
cleanup_card(cops_dev);
free_netdev(cops_dev);
}
+module_init(cops_module_init);
+module_exit(cops_module_exit);
#endif /* MODULE */
/*
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index c59c8067de991989498bceb5b9f0dbc9a60c2e03..bdc4c0bb56d90965bec6b1b265bb98bf9521c768 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -940,7 +940,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
/* is the RECON info empty or old? */
if (!lp->first_recon || !lp->last_recon ||
- jiffies - lp->last_recon > HZ * 10) {
+ time_after(jiffies, lp->last_recon + HZ * 10)) {
if (lp->network_down)
BUGMSG(D_NORMAL, "reconfiguration detected: cabling restored?\n");
lp->first_recon = lp->last_recon = jiffies;
@@ -974,7 +974,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
lp->num_recons = 1;
}
}
- } else if (lp->network_down && jiffies - lp->last_recon > HZ * 10) {
+ } else if (lp->network_down &&
+ time_after(jiffies, lp->last_recon + HZ * 10)) {
if (lp->network_down)
BUGMSG(D_NORMAL, "cabling restored?\n");
lp->first_recon = lp->last_recon = 0;
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 7cf0a2511697fbe0aedc6b619c243b6b8d2269ef..8b51313b1300b9f5b4c30c2eb9ff3383c2cb759f 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -348,14 +348,15 @@ MODULE_LICENSE("GPL");
#ifdef MODULE
-int init_module(void)
+static int __init com20020_module_init(void)
{
BUGLVL(D_NORMAL) printk(VERSION);
return 0;
}
-void cleanup_module(void)
+static void __exit com20020_module_exit(void)
{
}
-
+module_init(com20020_module_init);
+module_exit(com20020_module_exit);
#endif /* MODULE */
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 24d81f922533cd778f46ba1e6de93900a223f4ee..7e874d485d24a36fbab6aee652eaf44c6cf72e78 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -881,7 +881,7 @@ MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address");
MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number");
MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)");
-int __init init_module(void)
+static int __init at1700_module_init(void)
{
if (io == 0)
printk("at1700: You should not use auto-probing with insmod!\n");
@@ -891,13 +891,14 @@ int __init init_module(void)
return 0;
}
-void __exit
-cleanup_module(void)
+static void __exit at1700_module_exit(void)
{
unregister_netdev(dev_at1700);
cleanup_card(dev_at1700);
free_netdev(dev_at1700);
}
+module_init(at1700_module_init);
+module_exit(at1700_module_exit);
#endif /* MODULE */
MODULE_LICENSE("GPL");
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index 13c293b286de37f4509e039c66a384b00ebc0249..4cceaac8863ac5a31b1ee02e0c1cb9319f4e53d3 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -1155,7 +1155,7 @@ static int lance_set_mac_address( struct net_device *dev, void *addr )
#ifdef MODULE
static struct net_device *atarilance_dev;
-int __init init_module(void)
+static int __init atarilance_module_init(void)
{
atarilance_dev = atarilance_probe(-1);
if (IS_ERR(atarilance_dev))
@@ -1163,13 +1163,14 @@ int __init init_module(void)
return 0;
}
-void __exit cleanup_module(void)
+static void __exit atarilance_module_exit(void)
{
unregister_netdev(atarilance_dev);
free_irq(atarilance_dev->irq, atarilance_dev);
free_netdev(atarilance_dev);
}
-
+module_init(atarilance_module_init);
+module_exit(atarilance_module_exit);
#endif /* MODULE */
diff --git a/drivers/net/atl1/Makefile b/drivers/net/atl1/Makefile
deleted file mode 100644
index a6b707e4e69ee722168c733b122cd55327db2427..0000000000000000000000000000000000000000
--- a/drivers/net/atl1/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_ATL1) += atl1.o
-atl1-y += atl1_main.o atl1_hw.o atl1_ethtool.o atl1_param.o
diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h
deleted file mode 100644
index ff4765f6c3de632335d8f4e01011aaaf78279377..0000000000000000000000000000000000000000
--- a/drivers/net/atl1/atl1.h
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook
- * Copyright(c) 2006 Jay Cliburn
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _ATL1_H_
-#define _ATL1_H_
-
-#include
-#include
-
-#include "atl1_hw.h"
-
-/* function prototypes needed by multiple files */
-s32 atl1_up(struct atl1_adapter *adapter);
-void atl1_down(struct atl1_adapter *adapter);
-int atl1_reset(struct atl1_adapter *adapter);
-s32 atl1_setup_ring_resources(struct atl1_adapter *adapter);
-void atl1_free_ring_resources(struct atl1_adapter *adapter);
-
-extern char atl1_driver_name[];
-extern char atl1_driver_version[];
-extern const struct ethtool_ops atl1_ethtool_ops;
-
-struct atl1_adapter;
-
-#define ATL1_MAX_INTR 3
-#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */
-
-#define ATL1_DEFAULT_TPD 256
-#define ATL1_MAX_TPD 1024
-#define ATL1_MIN_TPD 64
-#define ATL1_DEFAULT_RFD 512
-#define ATL1_MIN_RFD 128
-#define ATL1_MAX_RFD 2048
-
-#define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i]))
-#define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc)
-#define ATL1_TPD_DESC(R, i) ATL1_GET_DESC(R, i, struct tx_packet_desc)
-#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc)
-
-/*
- * This detached comment is preserved for documentation purposes only.
- * It was originally attached to some code that got deleted, but seems
- * important enough to keep around...
- *
- *
- * Some workarounds require millisecond delays and are run during interrupt
- * context. Most notably, when establishing link, the phy may need tweaking
- * but cannot process phy register reads/writes faster than millisecond
- * intervals...and we establish link due to a "link status change" interrupt.
- *
- */
-
-/*
- * atl1_ring_header represents a single, contiguous block of DMA space
- * mapped for the three descriptor rings (tpd, rfd, rrd) and the two
- * message blocks (cmb, smb) described below
- */
-struct atl1_ring_header {
- void *desc; /* virtual address */
- dma_addr_t dma; /* physical address*/
- unsigned int size; /* length in bytes */
-};
-
-/*
- * atl1_buffer is wrapper around a pointer to a socket buffer
- * so a DMA handle can be stored along with the skb
- */
-struct atl1_buffer {
- struct sk_buff *skb; /* socket buffer */
- u16 length; /* rx buffer length */
- u16 alloced; /* 1 if skb allocated */
- dma_addr_t dma;
-};
-
-/* transmit packet descriptor (tpd) ring */
-struct atl1_tpd_ring {
- void *desc; /* descriptor ring virtual address */
- dma_addr_t dma; /* descriptor ring physical address */
- u16 size; /* descriptor ring length in bytes */
- u16 count; /* number of descriptors in the ring */
- u16 hw_idx; /* hardware index */
- atomic_t next_to_clean;
- atomic_t next_to_use;
- struct atl1_buffer *buffer_info;
-};
-
-/* receive free descriptor (rfd) ring */
-struct atl1_rfd_ring {
- void *desc; /* descriptor ring virtual address */
- dma_addr_t dma; /* descriptor ring physical address */
- u16 size; /* descriptor ring length in bytes */
- u16 count; /* number of descriptors in the ring */
- atomic_t next_to_use;
- u16 next_to_clean;
- struct atl1_buffer *buffer_info;
-};
-
-/* receive return descriptor (rrd) ring */
-struct atl1_rrd_ring {
- void *desc; /* descriptor ring virtual address */
- dma_addr_t dma; /* descriptor ring physical address */
- unsigned int size; /* descriptor ring length in bytes */
- u16 count; /* number of descriptors in the ring */
- u16 next_to_use;
- atomic_t next_to_clean;
-};
-
-/* coalescing message block (cmb) */
-struct atl1_cmb {
- struct coals_msg_block *cmb;
- dma_addr_t dma;
-};
-
-/* statistics message block (smb) */
-struct atl1_smb {
- struct stats_msg_block *smb;
- dma_addr_t dma;
-};
-
-/* Statistics counters */
-struct atl1_sft_stats {
- u64 rx_packets;
- u64 tx_packets;
- u64 rx_bytes;
- u64 tx_bytes;
- u64 multicast;
- u64 collisions;
- u64 rx_errors;
- u64 rx_length_errors;
- u64 rx_crc_errors;
- u64 rx_frame_errors;
- u64 rx_fifo_errors;
- u64 rx_missed_errors;
- u64 tx_errors;
- u64 tx_fifo_errors;
- u64 tx_aborted_errors;
- u64 tx_window_errors;
- u64 tx_carrier_errors;
- u64 tx_pause; /* num pause packets transmitted. */
- u64 excecol; /* num tx packets w/ excessive collisions. */
- u64 deffer; /* num tx packets deferred */
- u64 scc; /* num packets subsequently transmitted
- * successfully w/ single prior collision. */
- u64 mcc; /* num packets subsequently transmitted
- * successfully w/ multiple prior collisions. */
- u64 latecol; /* num tx packets w/ late collisions. */
- u64 tx_underun; /* num tx packets aborted due to transmit
- * FIFO underrun, or TRD FIFO underrun */
- u64 tx_trunc; /* num tx packets truncated due to size
- * exceeding MTU, regardless whether truncated
- * by the chip or not. (The name doesn't really
- * reflect the meaning in this case.) */
- u64 rx_pause; /* num Pause packets received. */
- u64 rx_rrd_ov;
- u64 rx_trunc;
-};
-
-/* hardware structure */
-struct atl1_hw {
- u8 __iomem *hw_addr;
- struct atl1_adapter *back;
- enum atl1_dma_order dma_ord;
- enum atl1_dma_rcb rcb_value;
- enum atl1_dma_req_block dmar_block;
- enum atl1_dma_req_block dmaw_block;
- u8 preamble_len;
- u8 max_retry; /* Retransmission maximum, after which the
- * packet will be discarded */
- u8 jam_ipg; /* IPG to start JAM for collision based flow
- * control in half-duplex mode. In units of
- * 8-bit time */
- u8 ipgt; /* Desired back to back inter-packet gap.
- * The default is 96-bit time */
- u8 min_ifg; /* Minimum number of IFG to enforce in between
- * receive frames. Frame gap below such IFP
- * is dropped */
- u8 ipgr1; /* 64bit Carrier-Sense window */
- u8 ipgr2; /* 96-bit IPG window */
- u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned
- * burst. Each TPD is 16 bytes long */
- u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned
- * burst. Each RFD is 12 bytes long */
- u8 rfd_fetch_gap;
- u8 rrd_burst; /* Threshold number of RRDs that can be retired
- * in a burst. Each RRD is 16 bytes long */
- u8 tpd_fetch_th;
- u8 tpd_fetch_gap;
- u16 tx_jumbo_task_th;
- u16 txf_burst; /* Number of data bytes to read in a cache-
- * aligned burst. Each SRAM entry is 8 bytes */
- u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN
- * packets should add 4 bytes */
- u16 rx_jumbo_lkah;
- u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after
- * every 512ns passes. */
- u16 lcol; /* Collision Window */
-
- u16 cmb_tpd;
- u16 cmb_rrd;
- u16 cmb_rx_timer;
- u16 cmb_tx_timer;
- u32 smb_timer;
- u16 media_type;
- u16 autoneg_advertised;
-
- u16 mii_autoneg_adv_reg;
- u16 mii_1000t_ctrl_reg;
-
- u32 max_frame_size;
- u32 min_frame_size;
-
- u16 dev_rev;
-
- /* spi flash */
- u8 flash_vendor;
-
- u8 mac_addr[ETH_ALEN];
- u8 perm_mac_addr[ETH_ALEN];
-
- bool phy_configured;
-};
-
-struct atl1_adapter {
- struct net_device *netdev;
- struct pci_dev *pdev;
- struct net_device_stats net_stats;
- struct atl1_sft_stats soft_stats;
- struct vlan_group *vlgrp;
- u32 rx_buffer_len;
- u32 wol;
- u16 link_speed;
- u16 link_duplex;
- spinlock_t lock;
- struct work_struct tx_timeout_task;
- struct work_struct link_chg_task;
- struct work_struct pcie_dma_to_rst_task;
- struct timer_list watchdog_timer;
- struct timer_list phy_config_timer;
- bool phy_timer_pending;
-
- /* all descriptor rings' memory */
- struct atl1_ring_header ring_header;
-
- /* TX */
- struct atl1_tpd_ring tpd_ring;
- spinlock_t mb_lock;
-
- /* RX */
- struct atl1_rfd_ring rfd_ring;
- struct atl1_rrd_ring rrd_ring;
- u64 hw_csum_err;
- u64 hw_csum_good;
-
- u16 imt; /* interrupt moderator timer (2us resolution */
- u16 ict; /* interrupt clear timer (2us resolution */
- struct mii_if_info mii; /* MII interface info */
-
- /* structs defined in atl1_hw.h */
- u32 bd_number; /* board number */
- bool pci_using_64;
- struct atl1_hw hw;
- struct atl1_smb smb;
- struct atl1_cmb cmb;
-};
-
-#endif /* _ATL1_H_ */
diff --git a/drivers/net/atl1/atl1_ethtool.c b/drivers/net/atl1/atl1_ethtool.c
deleted file mode 100644
index 68a83be843ab5c232baece1655ff6f9b74aefae2..0000000000000000000000000000000000000000
--- a/drivers/net/atl1/atl1_ethtool.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook
- * Copyright(c) 2006 Jay Cliburn
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "atl1.h"
-
-struct atl1_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
-};
-
-#define ATL1_STAT(m) sizeof(((struct atl1_adapter *)0)->m), \
- offsetof(struct atl1_adapter, m)
-
-static struct atl1_stats atl1_gstrings_stats[] = {
- {"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
- {"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
- {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
- {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
- {"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
- {"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
- {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)},
- {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)},
- {"multicast", ATL1_STAT(soft_stats.multicast)},
- {"collisions", ATL1_STAT(soft_stats.collisions)},
- {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
- {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
- {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
- {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
- {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
- {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
- {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
- {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
- {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
- {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
- {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
- {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
- {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
- {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
- {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
- {"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
- {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
- {"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
- {"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
- {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
- {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
-};
-
-static void atl1_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- int i;
- char *p;
-
- for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
- p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
- data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
-
-}
-
-static int atl1_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return ARRAY_SIZE(atl1_gstrings_stats);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static int atl1_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- ecmd->supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg | SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->advertising |=
- (ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full);
- }
- else
- ecmd->advertising |= (ADVERTISED_1000baseT_Full);
- }
- ecmd->port = PORT_TP;
- ecmd->phy_address = 0;
- ecmd->transceiver = XCVR_INTERNAL;
-
- if (netif_carrier_ok(adapter->netdev)) {
- u16 link_speed, link_duplex;
- atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
- ecmd->speed = link_speed;
- if (link_duplex == FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- } else {
- ecmd->speed = -1;
- ecmd->duplex = -1;
- }
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL)
- ecmd->autoneg = AUTONEG_ENABLE;
- else
- ecmd->autoneg = AUTONEG_DISABLE;
-
- return 0;
-}
-
-static int atl1_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
- u16 phy_data;
- int ret_val = 0;
- u16 old_media_type = hw->media_type;
-
- if (netif_running(adapter->netdev)) {
- dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n");
- atl1_down(adapter);
- }
-
- if (ecmd->autoneg == AUTONEG_ENABLE)
- hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
- else {
- if (ecmd->speed == SPEED_1000) {
- if (ecmd->duplex != DUPLEX_FULL) {
- dev_warn(&adapter->pdev->dev,
- "can't force to 1000M half duplex\n");
- ret_val = -EINVAL;
- goto exit_sset;
- }
- hw->media_type = MEDIA_TYPE_1000M_FULL;
- } else if (ecmd->speed == SPEED_100) {
- if (ecmd->duplex == DUPLEX_FULL) {
- hw->media_type = MEDIA_TYPE_100M_FULL;
- } else
- hw->media_type = MEDIA_TYPE_100M_HALF;
- } else {
- if (ecmd->duplex == DUPLEX_FULL)
- hw->media_type = MEDIA_TYPE_10M_FULL;
- else
- hw->media_type = MEDIA_TYPE_10M_HALF;
- }
- }
- switch (hw->media_type) {
- case MEDIA_TYPE_AUTO_SENSOR:
- ecmd->advertising =
- ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg | ADVERTISED_TP;
- break;
- case MEDIA_TYPE_1000M_FULL:
- ecmd->advertising =
- ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg | ADVERTISED_TP;
- break;
- default:
- ecmd->advertising = 0;
- break;
- }
- if (atl1_phy_setup_autoneg_adv(hw)) {
- ret_val = -EINVAL;
- dev_warn(&adapter->pdev->dev,
- "invalid ethtool speed/duplex setting\n");
- goto exit_sset;
- }
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL)
- phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
- else {
- switch (hw->media_type) {
- case MEDIA_TYPE_100M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
- MII_CR_RESET;
- break;
- case MEDIA_TYPE_100M_HALF:
- phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_10M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- default: /* MEDIA_TYPE_10M_HALF: */
- phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- }
- }
- atl1_write_phy_reg(hw, MII_BMCR, phy_data);
-exit_sset:
- if (ret_val)
- hw->media_type = old_media_type;
-
- if (netif_running(adapter->netdev)) {
- dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n");
- atl1_up(adapter);
- } else if (!ret_val) {
- dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n");
- atl1_reset(adapter);
- }
- return ret_val;
-}
-
-static void atl1_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
-
- strncpy(drvinfo->driver, atl1_driver_name, sizeof(drvinfo->driver));
- strncpy(drvinfo->version, atl1_driver_version,
- sizeof(drvinfo->version));
- strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info));
- drvinfo->eedump_len = ATL1_EEDUMP_LEN;
-}
-
-static void atl1_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
-
- wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
- wol->wolopts = 0;
- if (adapter->wol & ATL1_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & ATL1_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & ATL1_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
- if (adapter->wol & ATL1_WUFC_MAG)
- wol->wolopts |= WAKE_MAGIC;
- return;
-}
-
-static int atl1_set_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
-
- if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
- return -EOPNOTSUPP;
- adapter->wol = 0;
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= ATL1_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= ATL1_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= ATL1_WUFC_BC;
- if (wol->wolopts & WAKE_MAGIC)
- adapter->wol |= ATL1_WUFC_MAG;
- return 0;
-}
-
-static void atl1_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
- struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
-
- ring->rx_max_pending = ATL1_MAX_RFD;
- ring->tx_max_pending = ATL1_MAX_TPD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rxdr->count;
- ring->tx_pending = txdr->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int atl1_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
- struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
- struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
-
- struct atl1_tpd_ring tpd_old, tpd_new;
- struct atl1_rfd_ring rfd_old, rfd_new;
- struct atl1_rrd_ring rrd_old, rrd_new;
- struct atl1_ring_header rhdr_old, rhdr_new;
- int err;
-
- tpd_old = adapter->tpd_ring;
- rfd_old = adapter->rfd_ring;
- rrd_old = adapter->rrd_ring;
- rhdr_old = adapter->ring_header;
-
- if (netif_running(adapter->netdev))
- atl1_down(adapter);
-
- rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
- rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
- rfdr->count;
- rfdr->count = (rfdr->count + 3) & ~3;
- rrdr->count = rfdr->count;
-
- tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
- tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
- tpdr->count;
- tpdr->count = (tpdr->count + 3) & ~3;
-
- if (netif_running(adapter->netdev)) {
- /* try to get new resources before deleting old */
- err = atl1_setup_ring_resources(adapter);
- if (err)
- goto err_setup_ring;
-
- /*
- * save the new, restore the old in order to free it,
- * then restore the new back again
- */
-
- rfd_new = adapter->rfd_ring;
- rrd_new = adapter->rrd_ring;
- tpd_new = adapter->tpd_ring;
- rhdr_new = adapter->ring_header;
- adapter->rfd_ring = rfd_old;
- adapter->rrd_ring = rrd_old;
- adapter->tpd_ring = tpd_old;
- adapter->ring_header = rhdr_old;
- atl1_free_ring_resources(adapter);
- adapter->rfd_ring = rfd_new;
- adapter->rrd_ring = rrd_new;
- adapter->tpd_ring = tpd_new;
- adapter->ring_header = rhdr_new;
-
- err = atl1_up(adapter);
- if (err)
- return err;
- }
- return 0;
-
-err_setup_ring:
- adapter->rfd_ring = rfd_old;
- adapter->rrd_ring = rrd_old;
- adapter->tpd_ring = tpd_old;
- adapter->ring_header = rhdr_old;
- atl1_up(adapter);
- return err;
-}
-
-static void atl1_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *epause)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- epause->autoneg = AUTONEG_ENABLE;
- } else {
- epause->autoneg = AUTONEG_DISABLE;
- }
- epause->rx_pause = 1;
- epause->tx_pause = 1;
-}
-
-static int atl1_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *epause)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- epause->autoneg = AUTONEG_ENABLE;
- } else {
- epause->autoneg = AUTONEG_DISABLE;
- }
-
- epause->rx_pause = 1;
- epause->tx_pause = 1;
-
- return 0;
-}
-
-static u32 atl1_get_rx_csum(struct net_device *netdev)
-{
- return 1;
-}
-
-static void atl1_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- u8 *p = data;
- int i;
-
- switch (stringset) {
- case ETH_SS_STATS:
- for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
- memcpy(p, atl1_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- break;
- }
-}
-
-static int atl1_nway_reset(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
-
- if (netif_running(netdev)) {
- u16 phy_data;
- atl1_down(adapter);
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL) {
- phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
- } else {
- switch (hw->media_type) {
- case MEDIA_TYPE_100M_FULL:
- phy_data = MII_CR_FULL_DUPLEX |
- MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_100M_HALF:
- phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_10M_FULL:
- phy_data = MII_CR_FULL_DUPLEX |
- MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- default: /* MEDIA_TYPE_10M_HALF */
- phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
- }
- }
- atl1_write_phy_reg(hw, MII_BMCR, phy_data);
- atl1_up(adapter);
- }
- return 0;
-}
-
-const struct ethtool_ops atl1_ethtool_ops = {
- .get_settings = atl1_get_settings,
- .set_settings = atl1_set_settings,
- .get_drvinfo = atl1_get_drvinfo,
- .get_wol = atl1_get_wol,
- .set_wol = atl1_set_wol,
- .get_ringparam = atl1_get_ringparam,
- .set_ringparam = atl1_set_ringparam,
- .get_pauseparam = atl1_get_pauseparam,
- .set_pauseparam = atl1_set_pauseparam,
- .get_rx_csum = atl1_get_rx_csum,
- .set_tx_csum = ethtool_op_set_tx_hw_csum,
- .get_link = ethtool_op_get_link,
- .set_sg = ethtool_op_set_sg,
- .get_strings = atl1_get_strings,
- .nway_reset = atl1_nway_reset,
- .get_ethtool_stats = atl1_get_ethtool_stats,
- .get_sset_count = atl1_get_sset_count,
- .set_tso = ethtool_op_set_tso,
-};
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
deleted file mode 100644
index 9d3bd22e3a82f96f289a462b60a9503954cb49a8..0000000000000000000000000000000000000000
--- a/drivers/net/atl1/atl1_hw.c
+++ /dev/null
@@ -1,720 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook
- * Copyright(c) 2006 Jay Cliburn
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "atl1.h"
-
-/*
- * Reset the transmit and receive units; mask and clear all interrupts.
- * hw - Struct containing variables accessed by shared code
- * return : ATL1_SUCCESS or idle status (if error)
- */
-s32 atl1_reset_hw(struct atl1_hw *hw)
-{
- struct pci_dev *pdev = hw->back->pdev;
- u32 icr;
- int i;
-
- /*
- * Clear Interrupt mask to stop board from generating
- * interrupts & Clear any pending interrupt events
- */
- /*
- * iowrite32(0, hw->hw_addr + REG_IMR);
- * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
- */
-
- /*
- * Issue Soft Reset to the MAC. This will reset the chip's
- * transmit, receive, DMA. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
- ioread32(hw->hw_addr + REG_MASTER_CTRL);
-
- iowrite16(1, hw->hw_addr + REG_GPHY_ENABLE);
- ioread16(hw->hw_addr + REG_GPHY_ENABLE);
-
- msleep(1); /* delay about 1ms */
-
- /* Wait at least 10ms for All module to be Idle */
- for (i = 0; i < 10; i++) {
- icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
- if (!icr)
- break;
- msleep(1); /* delay 1 ms */
- cpu_relax(); /* FIXME: is this still the right way to do this? */
- }
-
- if (icr) {
- dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
- return icr;
- }
-
- return ATL1_SUCCESS;
-}
-
-/* function about EEPROM
- *
- * check_eeprom_exist
- * return 0 if eeprom exist
- */
-static int atl1_check_eeprom_exist(struct atl1_hw *hw)
-{
- u32 value;
- value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
- if (value & SPI_FLASH_CTRL_EN_VPD) {
- value &= ~SPI_FLASH_CTRL_EN_VPD;
- iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
- }
-
- value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
- return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
-}
-
-static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
-{
- int i;
- u32 control;
-
- if (offset & 3)
- return false; /* address do not align */
-
- iowrite32(0, hw->hw_addr + REG_VPD_DATA);
- control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
- iowrite32(control, hw->hw_addr + REG_VPD_CAP);
- ioread32(hw->hw_addr + REG_VPD_CAP);
-
- for (i = 0; i < 10; i++) {
- msleep(2);
- control = ioread32(hw->hw_addr + REG_VPD_CAP);
- if (control & VPD_CAP_VPD_FLAG)
- break;
- }
- if (control & VPD_CAP_VPD_FLAG) {
- *p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
- return true;
- }
- return false; /* timeout */
-}
-
-/*
- * Reads the value from a PHY register
- * hw - Struct containing variables accessed by shared code
- * reg_addr - address of the PHY register to read
- */
-s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
-{
- u32 val;
- int i;
-
- val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
- MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
- MDIO_CLK_SEL_SHIFT;
- iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
- ioread32(hw->hw_addr + REG_MDIO_CTRL);
-
- for (i = 0; i < MDIO_WAIT_TIMES; i++) {
- udelay(2);
- val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
- if (!(val & (MDIO_START | MDIO_BUSY))) {
- *phy_data = (u16) val;
- return ATL1_SUCCESS;
- }
- return ATL1_ERR_PHY;
-}
-
-#define CUSTOM_SPI_CS_SETUP 2
-#define CUSTOM_SPI_CLK_HI 2
-#define CUSTOM_SPI_CLK_LO 2
-#define CUSTOM_SPI_CS_HOLD 2
-#define CUSTOM_SPI_CS_HI 3
-
-static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
-{
- int i;
- u32 value;
-
- iowrite32(0, hw->hw_addr + REG_SPI_DATA);
- iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
-
- value = SPI_FLASH_CTRL_WAIT_READY |
- (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
- SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
- SPI_FLASH_CTRL_CLK_HI_MASK) <<
- SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
- SPI_FLASH_CTRL_CLK_LO_MASK) <<
- SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
- SPI_FLASH_CTRL_CS_HOLD_MASK) <<
- SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
- SPI_FLASH_CTRL_CS_HI_MASK) <<
- SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
- SPI_FLASH_CTRL_INS_SHIFT;
-
- iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
-
- value |= SPI_FLASH_CTRL_START;
- iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
- ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
-
- for (i = 0; i < 10; i++) {
- msleep(1); /* 1ms */
- value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
- if (!(value & SPI_FLASH_CTRL_START))
- break;
- }
-
- if (value & SPI_FLASH_CTRL_START)
- return false;
-
- *buf = ioread32(hw->hw_addr + REG_SPI_DATA);
-
- return true;
-}
-
-/*
- * get_permanent_address
- * return 0 if get valid mac address,
- */
-static int atl1_get_permanent_address(struct atl1_hw *hw)
-{
- u32 addr[2];
- u32 i, control;
- u16 reg;
- u8 eth_addr[ETH_ALEN];
- bool key_valid;
-
- if (is_valid_ether_addr(hw->perm_mac_addr))
- return 0;
-
- /* init */
- addr[0] = addr[1] = 0;
-
- if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */
- reg = 0;
- key_valid = false;
- /* Read out all EEPROM content */
- i = 0;
- while (1) {
- if (atl1_read_eeprom(hw, i + 0x100, &control)) {
- if (key_valid) {
- if (reg == REG_MAC_STA_ADDR)
- addr[0] = control;
- else if (reg == (REG_MAC_STA_ADDR + 4))
- addr[1] = control;
- key_valid = false;
- } else if ((control & 0xff) == 0x5A) {
- key_valid = true;
- reg = (u16) (control >> 16);
- } else
- break; /* assume data end while encount an invalid KEYWORD */
- } else
- break; /* read error */
- i += 4;
- }
-
- *(u32 *) ð_addr[2] = swab32(addr[0]);
- *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
- if (is_valid_ether_addr(eth_addr)) {
- memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
- return 0;
- }
- return 1;
- }
-
- /* see if SPI FLAGS exist ? */
- addr[0] = addr[1] = 0;
- reg = 0;
- key_valid = false;
- i = 0;
- while (1) {
- if (atl1_spi_read(hw, i + 0x1f000, &control)) {
- if (key_valid) {
- if (reg == REG_MAC_STA_ADDR)
- addr[0] = control;
- else if (reg == (REG_MAC_STA_ADDR + 4))
- addr[1] = control;
- key_valid = false;
- } else if ((control & 0xff) == 0x5A) {
- key_valid = true;
- reg = (u16) (control >> 16);
- } else
- break; /* data end */
- } else
- break; /* read error */
- i += 4;
- }
-
- *(u32 *) ð_addr[2] = swab32(addr[0]);
- *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
- if (is_valid_ether_addr(eth_addr)) {
- memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
- return 0;
- }
-
- /*
- * On some motherboards, the MAC address is written by the
- * BIOS directly to the MAC register during POST, and is
- * not stored in eeprom. If all else thus far has failed
- * to fetch the permanent MAC address, try reading it directly.
- */
- addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
- addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
- *(u32 *) ð_addr[2] = swab32(addr[0]);
- *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
- if (is_valid_ether_addr(eth_addr)) {
- memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
- return 0;
- }
-
- return 1;
-}
-
-/*
- * Reads the adapter's MAC address from the EEPROM
- * hw - Struct containing variables accessed by shared code
- */
-s32 atl1_read_mac_addr(struct atl1_hw *hw)
-{
- u16 i;
-
- if (atl1_get_permanent_address(hw))
- random_ether_addr(hw->perm_mac_addr);
-
- for (i = 0; i < ETH_ALEN; i++)
- hw->mac_addr[i] = hw->perm_mac_addr[i];
- return ATL1_SUCCESS;
-}
-
-/*
- * Hashes an address to determine its location in the multicast table
- * hw - Struct containing variables accessed by shared code
- * mc_addr - the multicast address to hash
- *
- * atl1_hash_mc_addr
- * purpose
- * set hash value for a multicast address
- * hash calcu processing :
- * 1. calcu 32bit CRC for multicast address
- * 2. reverse crc with MSB to LSB
- */
-u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
-{
- u32 crc32, value = 0;
- int i;
-
- crc32 = ether_crc_le(6, mc_addr);
- for (i = 0; i < 32; i++)
- value |= (((crc32 >> i) & 1) << (31 - i));
-
- return value;
-}
-
-/*
- * Sets the bit in the multicast table corresponding to the hash value.
- * hw - Struct containing variables accessed by shared code
- * hash_value - Multicast address hash value
- */
-void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
-{
- u32 hash_bit, hash_reg;
- u32 mta;
-
- /*
- * The HASH Table is a register array of 2 32-bit registers.
- * It is treated like an array of 64 bits. We want to set
- * bit BitArray[hash_value]. So we figure out what register
- * the bit is in, read it, OR in the new bit, then write
- * back the new value. The register is determined by the
- * upper 7 bits of the hash value and the bit within that
- * register are determined by the lower 5 bits of the value.
- */
- hash_reg = (hash_value >> 31) & 0x1;
- hash_bit = (hash_value >> 26) & 0x1F;
- mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
- mta |= (1 << hash_bit);
- iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
-}
-
-/*
- * Writes a value to a PHY register
- * hw - Struct containing variables accessed by shared code
- * reg_addr - address of the PHY register to write
- * data - data to write to the PHY
- */
-s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
-{
- int i;
- u32 val;
-
- val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
- (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
- MDIO_SUP_PREAMBLE |
- MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
- iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
- ioread32(hw->hw_addr + REG_MDIO_CTRL);
-
- for (i = 0; i < MDIO_WAIT_TIMES; i++) {
- udelay(2);
- val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
-
- if (!(val & (MDIO_START | MDIO_BUSY)))
- return ATL1_SUCCESS;
-
- return ATL1_ERR_PHY;
-}
-
-/*
- * Make L001's PHY out of Power Saving State (bug)
- * hw - Struct containing variables accessed by shared code
- * when power on, L001's PHY always on Power saving State
- * (Gigabit Link forbidden)
- */
-static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
-{
- s32 ret;
- ret = atl1_write_phy_reg(hw, 29, 0x0029);
- if (ret)
- return ret;
- return atl1_write_phy_reg(hw, 30, 0);
-}
-
-/*
- *TODO: do something or get rid of this
- */
-s32 atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
-/* s32 ret_val;
- * u16 phy_data;
- */
-
-/*
- ret_val = atl1_write_phy_reg(hw, ...);
- ret_val = atl1_write_phy_reg(hw, ...);
- ....
-*/
- return ATL1_SUCCESS;
-}
-
-/*
- * Resets the PHY and make all config validate
- * hw - Struct containing variables accessed by shared code
- *
- * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
- */
-static s32 atl1_phy_reset(struct atl1_hw *hw)
-{
- struct pci_dev *pdev = hw->back->pdev;
- s32 ret_val;
- u16 phy_data;
-
- if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
- hw->media_type == MEDIA_TYPE_1000M_FULL)
- phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
- else {
- switch (hw->media_type) {
- case MEDIA_TYPE_100M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
- MII_CR_RESET;
- break;
- case MEDIA_TYPE_100M_HALF:
- phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
- break;
- case MEDIA_TYPE_10M_FULL:
- phy_data =
- MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- default: /* MEDIA_TYPE_10M_HALF: */
- phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
- break;
- }
- }
-
- ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
- if (ret_val) {
- u32 val;
- int i;
- /* pcie serdes link may be down! */
- dev_dbg(&pdev->dev, "pcie phy link down\n");
-
- for (i = 0; i < 25; i++) {
- msleep(1);
- val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
- if (!(val & (MDIO_START | MDIO_BUSY)))
- break;
- }
-
- if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
- dev_warn(&pdev->dev, "pcie link down at least 25ms\n");
- return ret_val;
- }
- }
- return ATL1_SUCCESS;
-}
-
-/*
- * Configures PHY autoneg and flow control advertisement settings
- * hw - Struct containing variables accessed by shared code
- */
-s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
-{
- s32 ret_val;
- s16 mii_autoneg_adv_reg;
- s16 mii_1000t_ctrl_reg;
-
- /* Read the MII Auto-Neg Advertisement Register (Address 4). */
- mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
-
- /* Read the MII 1000Base-T Control Register (Address 9). */
- mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK;
-
- /*
- * First we clear all the 10/100 mb speed bits in the Auto-Neg
- * Advertisement Register (Address 4) and the 1000 mb speed bits in
- * the 1000Base-T Control Register (Address 9).
- */
- mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
- mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK;
-
- /*
- * Need to parse media_type and set up
- * the appropriate PHY registers.
- */
- switch (hw->media_type) {
- case MEDIA_TYPE_AUTO_SENSOR:
- mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
- MII_AR_10T_FD_CAPS |
- MII_AR_100TX_HD_CAPS |
- MII_AR_100TX_FD_CAPS);
- mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS;
- break;
-
- case MEDIA_TYPE_1000M_FULL:
- mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS;
- break;
-
- case MEDIA_TYPE_100M_FULL:
- mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
- break;
-
- case MEDIA_TYPE_100M_HALF:
- mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
- break;
-
- case MEDIA_TYPE_10M_FULL:
- mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
- break;
-
- default:
- mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
- break;
- }
-
- /* flow control fixed to enable all */
- mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
-
- hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
- hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
-
- ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
-
- return ATL1_SUCCESS;
-}
-
-/*
- * Configures link settings.
- * hw - Struct containing variables accessed by shared code
- * Assumes the hardware has previously been reset and the
- * transmitter and receiver are not enabled.
- */
-static s32 atl1_setup_link(struct atl1_hw *hw)
-{
- struct pci_dev *pdev = hw->back->pdev;
- s32 ret_val;
-
- /*
- * Options:
- * PHY will advertise value(s) parsed from
- * autoneg_advertised and fc
- * no matter what autoneg is , We will not wait link result.
- */
- ret_val = atl1_phy_setup_autoneg_adv(hw);
- if (ret_val) {
- dev_dbg(&pdev->dev, "error setting up autonegotiation\n");
- return ret_val;
- }
- /* SW.Reset , En-Auto-Neg if needed */
- ret_val = atl1_phy_reset(hw);
- if (ret_val) {
- dev_dbg(&pdev->dev, "error resetting phy\n");
- return ret_val;
- }
- hw->phy_configured = true;
- return ret_val;
-}
-
-static struct atl1_spi_flash_dev flash_table[] = {
-/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */
- {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
- {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
- {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
-};
-
-static void atl1_init_flash_opcode(struct atl1_hw *hw)
-{
- if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
- hw->flash_vendor = 0; /* ATMEL */
-
- /* Init OP table */
- iowrite8(flash_table[hw->flash_vendor].cmd_program,
- hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
- iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
- hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
- iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
- hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
- iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
- hw->hw_addr + REG_SPI_FLASH_OP_RDID);
- iowrite8(flash_table[hw->flash_vendor].cmd_wren,
- hw->hw_addr + REG_SPI_FLASH_OP_WREN);
- iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
- hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
- iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
- hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
- iowrite8(flash_table[hw->flash_vendor].cmd_read,
- hw->hw_addr + REG_SPI_FLASH_OP_READ);
-}
-
-/*
- * Performs basic configuration of the adapter.
- * hw - Struct containing variables accessed by shared code
- * Assumes that the controller has previously been reset and is in a
- * post-reset uninitialized state. Initializes multicast table,
- * and Calls routines to setup link
- * Leaves the transmit and receive units disabled and uninitialized.
- */
-s32 atl1_init_hw(struct atl1_hw *hw)
-{
- u32 ret_val = 0;
-
- /* Zero out the Multicast HASH table */
- iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
- /* clear the old settings from the multicast hash table */
- iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
-
- atl1_init_flash_opcode(hw);
-
- if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
- ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
- if (ret_val)
- return ret_val;
- /* make PHY out of power-saving state */
- ret_val = atl1_phy_leave_power_saving(hw);
- if (ret_val)
- return ret_val;
- /* Call a subroutine to configure the link */
- ret_val = atl1_setup_link(hw);
- }
- return ret_val;
-}
-
-/*
- * Detects the current speed and duplex settings of the hardware.
- * hw - Struct containing variables accessed by shared code
- * speed - Speed of the connection
- * duplex - Duplex setting of the connection
- */
-s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
-{
- struct pci_dev *pdev = hw->back->pdev;
- s32 ret_val;
- u16 phy_data;
-
- /* ; --- Read PHY Specific Status Register (17) */
- ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED))
- return ATL1_ERR_PHY_RES;
-
- switch (phy_data & MII_AT001_PSSR_SPEED) {
- case MII_AT001_PSSR_1000MBS:
- *speed = SPEED_1000;
- break;
- case MII_AT001_PSSR_100MBS:
- *speed = SPEED_100;
- break;
- case MII_AT001_PSSR_10MBS:
- *speed = SPEED_10;
- break;
- default:
- dev_dbg(&pdev->dev, "error getting speed\n");
- return ATL1_ERR_PHY_SPEED;
- break;
- }
- if (phy_data & MII_AT001_PSSR_DPLX)
- *duplex = FULL_DUPLEX;
- else
- *duplex = HALF_DUPLEX;
-
- return ATL1_SUCCESS;
-}
-
-void atl1_set_mac_addr(struct atl1_hw *hw)
-{
- u32 value;
- /*
- * 00-0B-6A-F6-00-DC
- * 0: 6AF600DC 1: 000B
- * low dword
- */
- value = (((u32) hw->mac_addr[2]) << 24) |
- (((u32) hw->mac_addr[3]) << 16) |
- (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
- iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
- /* high dword */
- value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
- iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
-}
diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h
deleted file mode 100644
index 939aa0f53f6e2b243d486436f084317f39fcc14b..0000000000000000000000000000000000000000
--- a/drivers/net/atl1/atl1_hw.h
+++ /dev/null
@@ -1,946 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook
- * Copyright(c) 2006 Jay Cliburn
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * There are a lot of defines in here that are unused and/or have cryptic
- * names. Please leave them alone, as they're the closest thing we have
- * to a spec from Attansic at present. *ahem* -- CHS
- */
-
-#ifndef _ATL1_HW_H_
-#define _ATL1_HW_H_
-
-#include
-#include
-
-struct atl1_adapter;
-struct atl1_hw;
-
-/* function prototypes needed by multiple files */
-s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw);
-s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data);
-s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
-s32 atl1_read_mac_addr(struct atl1_hw *hw);
-s32 atl1_init_hw(struct atl1_hw *hw);
-s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
-s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex);
-u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr);
-void atl1_hash_set(struct atl1_hw *hw, u32 hash_value);
-s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data);
-void atl1_set_mac_addr(struct atl1_hw *hw);
-s32 atl1_phy_enter_power_saving(struct atl1_hw *hw);
-s32 atl1_reset_hw(struct atl1_hw *hw);
-void atl1_check_options(struct atl1_adapter *adapter);
-
-/* register definitions */
-#define REG_PCIE_CAP_LIST 0x58
-
-#define REG_VPD_CAP 0x6C
-#define VPD_CAP_ID_MASK 0xff
-#define VPD_CAP_ID_SHIFT 0
-#define VPD_CAP_NEXT_PTR_MASK 0xFF
-#define VPD_CAP_NEXT_PTR_SHIFT 8
-#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
-#define VPD_CAP_VPD_ADDR_SHIFT 16
-#define VPD_CAP_VPD_FLAG 0x80000000
-
-#define REG_VPD_DATA 0x70
-
-#define REG_SPI_FLASH_CTRL 0x200
-#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
-#define SPI_FLASH_CTRL_STS_WEN 0x2
-#define SPI_FLASH_CTRL_STS_WPEN 0x80
-#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
-#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
-#define SPI_FLASH_CTRL_INS_MASK 0x7
-#define SPI_FLASH_CTRL_INS_SHIFT 8
-#define SPI_FLASH_CTRL_START 0x800
-#define SPI_FLASH_CTRL_EN_VPD 0x2000
-#define SPI_FLASH_CTRL_LDSTART 0x8000
-#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
-#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
-#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
-#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
-#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
-#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
-#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
-#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
-#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
-#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
-#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
-#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
-#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
-
-#define REG_SPI_ADDR 0x204
-
-#define REG_SPI_DATA 0x208
-
-#define REG_SPI_FLASH_CONFIG 0x20C
-#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
-#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
-#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
-#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
-#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
-
-#define REG_SPI_FLASH_OP_PROGRAM 0x210
-#define REG_SPI_FLASH_OP_SC_ERASE 0x211
-#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
-#define REG_SPI_FLASH_OP_RDID 0x213
-#define REG_SPI_FLASH_OP_WREN 0x214
-#define REG_SPI_FLASH_OP_RDSR 0x215
-#define REG_SPI_FLASH_OP_WRSR 0x216
-#define REG_SPI_FLASH_OP_READ 0x217
-
-#define REG_TWSI_CTRL 0x218
-#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
-#define TWSI_CTRL_LD_OFFSET_SHIFT 0
-#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
-#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
-#define TWSI_CTRL_SW_LDSTART 0x800
-#define TWSI_CTRL_HW_LDSTART 0x1000
-#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
-#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
-#define TWSI_CTRL_LD_EXIST 0x400000
-#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
-#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
-#define TWSI_CTRL_FREQ_SEL_100K 0
-#define TWSI_CTRL_FREQ_SEL_200K 1
-#define TWSI_CTRL_FREQ_SEL_300K 2
-#define TWSI_CTRL_FREQ_SEL_400K 3
-#define TWSI_CTRL_SMB_SLV_ADDR
-#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
-#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
-
-#define REG_PCIE_DEV_MISC_CTRL 0x21C
-#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
-#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
-#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
-#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
-#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
-
-/* Selene Master Control Register */
-#define REG_MASTER_CTRL 0x1400
-#define MASTER_CTRL_SOFT_RST 0x1
-#define MASTER_CTRL_MTIMER_EN 0x2
-#define MASTER_CTRL_ITIMER_EN 0x4
-#define MASTER_CTRL_MANUAL_INT 0x8
-#define MASTER_CTRL_REV_NUM_SHIFT 16
-#define MASTER_CTRL_REV_NUM_MASK 0xff
-#define MASTER_CTRL_DEV_ID_SHIFT 24
-#define MASTER_CTRL_DEV_ID_MASK 0xff
-
-/* Timer Initial Value Register */
-#define REG_MANUAL_TIMER_INIT 0x1404
-
-/* IRQ ModeratorTimer Initial Value Register */
-#define REG_IRQ_MODU_TIMER_INIT 0x1408
-
-#define REG_GPHY_ENABLE 0x140C
-
-/* IRQ Anti-Lost Timer Initial Value Register */
-#define REG_CMBDISDMA_TIMER 0x140E
-
-/* Block IDLE Status Register */
-#define REG_IDLE_STATUS 0x1410
-#define IDLE_STATUS_RXMAC 1
-#define IDLE_STATUS_TXMAC 2
-#define IDLE_STATUS_RXQ 4
-#define IDLE_STATUS_TXQ 8
-#define IDLE_STATUS_DMAR 0x10
-#define IDLE_STATUS_DMAW 0x20
-#define IDLE_STATUS_SMB 0x40
-#define IDLE_STATUS_CMB 0x80
-
-/* MDIO Control Register */
-#define REG_MDIO_CTRL 0x1414
-#define MDIO_DATA_MASK 0xffff
-#define MDIO_DATA_SHIFT 0
-#define MDIO_REG_ADDR_MASK 0x1f
-#define MDIO_REG_ADDR_SHIFT 16
-#define MDIO_RW 0x200000
-#define MDIO_SUP_PREAMBLE 0x400000
-#define MDIO_START 0x800000
-#define MDIO_CLK_SEL_SHIFT 24
-#define MDIO_CLK_25_4 0
-#define MDIO_CLK_25_6 2
-#define MDIO_CLK_25_8 3
-#define MDIO_CLK_25_10 4
-#define MDIO_CLK_25_14 5
-#define MDIO_CLK_25_20 6
-#define MDIO_CLK_25_28 7
-#define MDIO_BUSY 0x8000000
-#define MDIO_WAIT_TIMES 30
-
-/* MII PHY Status Register */
-#define REG_PHY_STATUS 0x1418
-
-/* BIST Control and Status Register0 (for the Packet Memory) */
-#define REG_BIST0_CTRL 0x141c
-#define BIST0_NOW 0x1
-#define BIST0_SRAM_FAIL 0x2
-#define BIST0_FUSE_FLAG 0x4
-#define REG_BIST1_CTRL 0x1420
-#define BIST1_NOW 0x1
-#define BIST1_SRAM_FAIL 0x2
-#define BIST1_FUSE_FLAG 0x4
-
-/* MAC Control Register */
-#define REG_MAC_CTRL 0x1480
-#define MAC_CTRL_TX_EN 1
-#define MAC_CTRL_RX_EN 2
-#define MAC_CTRL_TX_FLOW 4
-#define MAC_CTRL_RX_FLOW 8
-#define MAC_CTRL_LOOPBACK 0x10
-#define MAC_CTRL_DUPLX 0x20
-#define MAC_CTRL_ADD_CRC 0x40
-#define MAC_CTRL_PAD 0x80
-#define MAC_CTRL_LENCHK 0x100
-#define MAC_CTRL_HUGE_EN 0x200
-#define MAC_CTRL_PRMLEN_SHIFT 10
-#define MAC_CTRL_PRMLEN_MASK 0xf
-#define MAC_CTRL_RMV_VLAN 0x4000
-#define MAC_CTRL_PROMIS_EN 0x8000
-#define MAC_CTRL_TX_PAUSE 0x10000
-#define MAC_CTRL_SCNT 0x20000
-#define MAC_CTRL_SRST_TX 0x40000
-#define MAC_CTRL_TX_SIMURST 0x80000
-#define MAC_CTRL_SPEED_SHIFT 20
-#define MAC_CTRL_SPEED_MASK 0x300000
-#define MAC_CTRL_SPEED_1000 2
-#define MAC_CTRL_SPEED_10_100 1
-#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
-#define MAC_CTRL_TX_HUGE 0x800000
-#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
-#define MAC_CTRL_MC_ALL_EN 0x2000000
-#define MAC_CTRL_BC_EN 0x4000000
-#define MAC_CTRL_DBG 0x8000000
-
-/* MAC IPG/IFG Control Register */
-#define REG_MAC_IPG_IFG 0x1484
-#define MAC_IPG_IFG_IPGT_SHIFT 0
-#define MAC_IPG_IFG_IPGT_MASK 0x7f
-#define MAC_IPG_IFG_MIFG_SHIFT 8
-#define MAC_IPG_IFG_MIFG_MASK 0xff
-#define MAC_IPG_IFG_IPGR1_SHIFT 16
-#define MAC_IPG_IFG_IPGR1_MASK 0x7f
-#define MAC_IPG_IFG_IPGR2_SHIFT 24
-#define MAC_IPG_IFG_IPGR2_MASK 0x7f
-
-/* MAC STATION ADDRESS */
-#define REG_MAC_STA_ADDR 0x1488
-
-/* Hash table for multicast address */
-#define REG_RX_HASH_TABLE 0x1490
-
-/* MAC Half-Duplex Control Register */
-#define REG_MAC_HALF_DUPLX_CTRL 0x1498
-#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
-#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff
-#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
-#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf
-#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
-#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
-#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
-#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
-#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
-#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf
-#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
-#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf
-
-/* Maximum Frame Length Control Register */
-#define REG_MTU 0x149c
-
-/* Wake-On-Lan control register */
-#define REG_WOL_CTRL 0x14a0
-#define WOL_PATTERN_EN 0x00000001
-#define WOL_PATTERN_PME_EN 0x00000002
-#define WOL_MAGIC_EN 0x00000004
-#define WOL_MAGIC_PME_EN 0x00000008
-#define WOL_LINK_CHG_EN 0x00000010
-#define WOL_LINK_CHG_PME_EN 0x00000020
-#define WOL_PATTERN_ST 0x00000100
-#define WOL_MAGIC_ST 0x00000200
-#define WOL_LINKCHG_ST 0x00000400
-#define WOL_CLK_SWITCH_EN 0x00008000
-#define WOL_PT0_EN 0x00010000
-#define WOL_PT1_EN 0x00020000
-#define WOL_PT2_EN 0x00040000
-#define WOL_PT3_EN 0x00080000
-#define WOL_PT4_EN 0x00100000
-#define WOL_PT5_EN 0x00200000
-#define WOL_PT6_EN 0x00400000
-
-/* WOL Length ( 2 DWORD ) */
-#define REG_WOL_PATTERN_LEN 0x14a4
-#define WOL_PT_LEN_MASK 0x7f
-#define WOL_PT0_LEN_SHIFT 0
-#define WOL_PT1_LEN_SHIFT 8
-#define WOL_PT2_LEN_SHIFT 16
-#define WOL_PT3_LEN_SHIFT 24
-#define WOL_PT4_LEN_SHIFT 0
-#define WOL_PT5_LEN_SHIFT 8
-#define WOL_PT6_LEN_SHIFT 16
-
-/* Internal SRAM Partition Register */
-#define REG_SRAM_RFD_ADDR 0x1500
-#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4)
-#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8)
-#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12)
-#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16)
-#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20)
-#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24)
-#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28)
-#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32)
-#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36)
-#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40)
-#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44)
-#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48)
-#define SRAM_TCPH_ADDR_MASK 0x0fff
-#define SRAM_TCPH_ADDR_SHIFT 0
-#define SRAM_PATH_ADDR_MASK 0x0fff
-#define SRAM_PATH_ADDR_SHIFT 16
-
-/* Load Ptr Register */
-#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52)
-
-/* Descriptor Control register */
-#define REG_DESC_BASE_ADDR_HI 0x1540
-#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4)
-#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8)
-#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12)
-#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16)
-#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20)
-#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24)
-#define DESC_RFD_RING_SIZE_MASK 0x7ff
-#define DESC_RFD_RING_SIZE_SHIFT 0
-#define DESC_RRD_RING_SIZE_MASK 0x7ff
-#define DESC_RRD_RING_SIZE_SHIFT 16
-#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28)
-#define DESC_TPD_RING_SIZE_MASK 0x3ff
-#define DESC_TPD_RING_SIZE_SHIFT 0
-
-/* TXQ Control Register */
-#define REG_TXQ_CTRL 0x1580
-#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0
-#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f
-#define TXQ_CTRL_EN 0x20
-#define TXQ_CTRL_ENH_MODE 0x40
-#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8
-#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f
-#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16
-#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff
-
-/* Jumbo packet Threshold for task offload */
-#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584
-#define TX_JUMBO_TASK_TH_MASK 0x7ff
-#define TX_JUMBO_TASK_TH_SHIFT 0
-#define TX_TPD_MIN_IPG_MASK 0x1f
-#define TX_TPD_MIN_IPG_SHIFT 16
-
-/* RXQ Control Register */
-#define REG_RXQ_CTRL 0x15a0
-#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0
-#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff
-#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8
-#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff
-#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16
-#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f
-#define RXQ_CTRL_CUT_THRU_EN 0x40000000
-#define RXQ_CTRL_EN 0x80000000
-
-/* Rx jumbo packet threshold and rrd retirement timer */
-#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4)
-#define RXQ_JMBOSZ_TH_MASK 0x7ff
-#define RXQ_JMBOSZ_TH_SHIFT 0
-#define RXQ_JMBO_LKAH_MASK 0xf
-#define RXQ_JMBO_LKAH_SHIFT 11
-#define RXQ_RRD_TIMER_MASK 0xffff
-#define RXQ_RRD_TIMER_SHIFT 16
-
-/* RFD flow control register */
-#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8)
-#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16
-#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff
-#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0
-#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff
-
-/* RRD flow control register */
-#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12)
-#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0
-#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff
-#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16
-#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff
-
-/* DMA Engine Control Register */
-#define REG_DMA_CTRL 0x15c0
-#define DMA_CTRL_DMAR_IN_ORDER 0x1
-#define DMA_CTRL_DMAR_ENH_ORDER 0x2
-#define DMA_CTRL_DMAR_OUT_ORDER 0x4
-#define DMA_CTRL_RCB_VALUE 0x8
-#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
-#define DMA_CTRL_DMAR_BURST_LEN_MASK 7
-#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
-#define DMA_CTRL_DMAW_BURST_LEN_MASK 7
-#define DMA_CTRL_DMAR_EN 0x400
-#define DMA_CTRL_DMAW_EN 0x800
-
-/* CMB/SMB Control Register */
-#define REG_CSMB_CTRL 0x15d0
-#define CSMB_CTRL_CMB_NOW 1
-#define CSMB_CTRL_SMB_NOW 2
-#define CSMB_CTRL_CMB_EN 4
-#define CSMB_CTRL_SMB_EN 8
-
-/* CMB DMA Write Threshold Register */
-#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4)
-#define CMB_RRD_TH_SHIFT 0
-#define CMB_RRD_TH_MASK 0x7ff
-#define CMB_TPD_TH_SHIFT 16
-#define CMB_TPD_TH_MASK 0x7ff
-
-/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */
-#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8)
-#define CMB_RX_TM_SHIFT 0
-#define CMB_RX_TM_MASK 0xffff
-#define CMB_TX_TM_SHIFT 16
-#define CMB_TX_TM_MASK 0xffff
-
-/* Number of packet received since last CMB write */
-#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12)
-
-/* Number of packet transmitted since last CMB write */
-#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16)
-
-/* SMB auto DMA timer register */
-#define REG_SMB_TIMER (REG_CSMB_CTRL+20)
-
-/* Mailbox Register */
-#define REG_MAILBOX 0x15f0
-#define MB_RFD_PROD_INDX_SHIFT 0
-#define MB_RFD_PROD_INDX_MASK 0x7ff
-#define MB_RRD_CONS_INDX_SHIFT 11
-#define MB_RRD_CONS_INDX_MASK 0x7ff
-#define MB_TPD_PROD_INDX_SHIFT 22
-#define MB_TPD_PROD_INDX_MASK 0x3ff
-
-/* Interrupt Status Register */
-#define REG_ISR 0x1600
-#define ISR_SMB 1
-#define ISR_TIMER 2
-#define ISR_MANUAL 4
-#define ISR_RXF_OV 8
-#define ISR_RFD_UNRUN 0x10
-#define ISR_RRD_OV 0x20
-#define ISR_TXF_UNRUN 0x40
-#define ISR_LINK 0x80
-#define ISR_HOST_RFD_UNRUN 0x100
-#define ISR_HOST_RRD_OV 0x200
-#define ISR_DMAR_TO_RST 0x400
-#define ISR_DMAW_TO_RST 0x800
-#define ISR_GPHY 0x1000
-#define ISR_RX_PKT 0x10000
-#define ISR_TX_PKT 0x20000
-#define ISR_TX_DMA 0x40000
-#define ISR_RX_DMA 0x80000
-#define ISR_CMB_RX 0x100000
-#define ISR_CMB_TX 0x200000
-#define ISR_MAC_RX 0x400000
-#define ISR_MAC_TX 0x800000
-#define ISR_UR_DETECTED 0x1000000
-#define ISR_FERR_DETECTED 0x2000000
-#define ISR_NFERR_DETECTED 0x4000000
-#define ISR_CERR_DETECTED 0x8000000
-#define ISR_PHY_LINKDOWN 0x10000000
-#define ISR_DIS_SMB 0x20000000
-#define ISR_DIS_DMA 0x40000000
-#define ISR_DIS_INT 0x80000000
-
-/* Interrupt Mask Register */
-#define REG_IMR 0x1604
-
-/* Normal Interrupt mask */
-#define IMR_NORMAL_MASK (\
- ISR_SMB |\
- ISR_GPHY |\
- ISR_PHY_LINKDOWN|\
- ISR_DMAR_TO_RST |\
- ISR_DMAW_TO_RST |\
- ISR_CMB_TX |\
- ISR_CMB_RX )
-
-/* Debug Interrupt Mask (enable all interrupt) */
-#define IMR_DEBUG_MASK (\
- ISR_SMB |\
- ISR_TIMER |\
- ISR_MANUAL |\
- ISR_RXF_OV |\
- ISR_RFD_UNRUN |\
- ISR_RRD_OV |\
- ISR_TXF_UNRUN |\
- ISR_LINK |\
- ISR_CMB_TX |\
- ISR_CMB_RX |\
- ISR_RX_PKT |\
- ISR_TX_PKT |\
- ISR_MAC_RX |\
- ISR_MAC_TX )
-
-/* Interrupt Status Register */
-#define REG_RFD_RRD_IDX 0x1800
-#define REG_TPD_IDX 0x1804
-
-/* MII definition */
-/* PHY Common Register */
-#define MII_AT001_CR 0x09
-#define MII_AT001_SR 0x0A
-#define MII_AT001_ESR 0x0F
-#define MII_AT001_PSCR 0x10
-#define MII_AT001_PSSR 0x11
-
-/* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_MASK 0x2040
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
-
-/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
-#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
-
-/* Link partner ability register. */
-#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
-#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
-#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
-#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
-#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
-#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
-#define MII_LPA_PAUSE 0x0400 /* PAUSE */
-#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
-#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
-#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
-#define MII_LPA_NPAGE 0x8000 /* Next page bit */
-
-/* Autoneg Advertisement Register */
-#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
-#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
-#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
-#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
-#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
-#define MII_AR_SPEED_MASK 0x01E0
-#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
-
-/* 1000BASE-T Control Register */
-#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
-#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */
-#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */
-#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */
-#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
-#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
-#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
-#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
-#define MII_AT001_CR_1000T_SPEED_MASK 0x0300
-#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300
-
-/* 1000BASE-T Status Register */
-#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
-#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
-#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
-#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
-#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
-#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
-
-/* Extended Status Register */
-#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-
-/* AT001 PHY Specific Control Register */
-#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
-#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
-#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008
-#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */
-#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */
-#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */
-#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */
-#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
-#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
-#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
-#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
-#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1
-#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5
-#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
-
-/* AT001 PHY Specific Status Register */
-#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
-#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
-#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */
-#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */
-#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
-
-/* PCI Command Register Bit Definitions */
-#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
-#define CMD_IO_SPACE 0x0001
-#define CMD_MEMORY_SPACE 0x0002
-#define CMD_BUS_MASTER 0x0004
-
-/* Wake Up Filter Control */
-#define ATL1_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define ATL1_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define ATL1_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define ATL1_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
-#define ATL1_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-
-/* Error Codes */
-#define ATL1_SUCCESS 0
-#define ATL1_ERR_EEPROM 1
-#define ATL1_ERR_PHY 2
-#define ATL1_ERR_CONFIG 3
-#define ATL1_ERR_PARAM 4
-#define ATL1_ERR_MAC_TYPE 5
-#define ATL1_ERR_PHY_TYPE 6
-#define ATL1_ERR_PHY_SPEED 7
-#define ATL1_ERR_PHY_RES 8
-
-#define SPEED_0 0xffff
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-#define MEDIA_TYPE_AUTO_SENSOR 0
-#define MEDIA_TYPE_1000M_FULL 1
-#define MEDIA_TYPE_100M_FULL 2
-#define MEDIA_TYPE_100M_HALF 3
-#define MEDIA_TYPE_10M_FULL 4
-#define MEDIA_TYPE_10M_HALF 5
-
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010
-#define ADVERTISE_1000_FULL 0x0020
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
-#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
-#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
-
-#define MAX_JUMBO_FRAME_SIZE 0x2800
-
-#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
-#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
-
-/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */
-#define EEPROM_SUM 0xBABA
-
-#define ATL1_EEDUMP_LEN 48
-
-/* Statistics counters collected by the MAC */
-struct stats_msg_block {
- /* rx */
- u32 rx_ok; /* The number of good packet received. */
- u32 rx_bcast; /* The number of good broadcast packet received. */
- u32 rx_mcast; /* The number of good multicast packet received. */
- u32 rx_pause; /* The number of Pause packet received. */
- u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */
- u32 rx_fcs_err; /* The number of packets with bad FCS. */
- u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */
- u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */
- u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */
- u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */
- u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */
- u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */
- u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */
- u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */
- u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */
- u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
- u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */
- u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size Å¡C truncated by Selene. */
- u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */
- u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */
- u32 rx_align_err; /* Alignment Error */
- u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */
- u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */
- u32 rx_err_addr; /* The number of packets dropped due to address filtering. */
-
- /* tx */
- u32 tx_ok; /* The number of good packet transmitted. */
- u32 tx_bcast; /* The number of good broadcast packet transmitted. */
- u32 tx_mcast; /* The number of good multicast packet transmitted. */
- u32 tx_pause; /* The number of Pause packet transmitted. */
- u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */
- u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */
- u32 tx_defer; /* The number of packets transmitted that is deferred. */
- u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */
- u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */
- u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
- u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
- u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
- u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
- u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
- u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
- u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */
- u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
- u32 tx_late_col; /* The number of packets transmitted with late collisions. */
- u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */
- u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
- u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
- u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */
- u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */
- u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */
- u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */
- u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update.
- * Software should clear this bit as soon as retrieving the statistics information. */
-};
-
-/* Coalescing Message Block */
-struct coals_msg_block {
- u32 int_stats; /* interrupt status */
- u16 rrd_prod_idx; /* TRD Producer Index. */
- u16 rfd_cons_idx; /* RFD Consumer Index. */
- u16 update; /* Selene sets this bit every time it DMA the CMB to host memory.
- * Software supposes to clear this bit when CMB information is processed. */
- u16 tpd_cons_idx; /* TPD Consumer Index. */
-};
-
-/* RRD descriptor */
-struct rx_return_desc {
- u8 num_buf; /* Number of RFD buffers used by the received packet */
- u8 resved;
- u16 buf_indx; /* RFD Index of the first buffer */
- union {
- u32 valid;
- struct {
- u16 rx_chksum;
- u16 pkt_size;
- } xsum_sz;
- } xsz;
-
- u16 pkt_flg; /* Packet flags */
- u16 err_flg; /* Error flags */
- u16 resved2;
- u16 vlan_tag; /* VLAN TAG */
-};
-
-#define PACKET_FLAG_ETH_TYPE 0x0080
-#define PACKET_FLAG_VLAN_INS 0x0100
-#define PACKET_FLAG_ERR 0x0200
-#define PACKET_FLAG_IPV4 0x0400
-#define PACKET_FLAG_UDP 0x0800
-#define PACKET_FLAG_TCP 0x1000
-#define PACKET_FLAG_BCAST 0x2000
-#define PACKET_FLAG_MCAST 0x4000
-#define PACKET_FLAG_PAUSE 0x8000
-
-#define ERR_FLAG_CRC 0x0001
-#define ERR_FLAG_CODE 0x0002
-#define ERR_FLAG_DRIBBLE 0x0004
-#define ERR_FLAG_RUNT 0x0008
-#define ERR_FLAG_OV 0x0010
-#define ERR_FLAG_TRUNC 0x0020
-#define ERR_FLAG_IP_CHKSUM 0x0040
-#define ERR_FLAG_L4_CHKSUM 0x0080
-#define ERR_FLAG_LEN 0x0100
-#define ERR_FLAG_DES_ADDR 0x0200
-
-/* RFD descriptor */
-struct rx_free_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 buf_len; /* Size of the receive buffer in host memory, in byte */
- u16 coalese; /* Update consumer index to host after the reception of this frame */
- /* __attribute__ ((packed)) is required */
-} __attribute__ ((packed));
-
-/* tsopu defines */
-#define TSO_PARAM_BUFLEN_MASK 0x3FFF
-#define TSO_PARAM_BUFLEN_SHIFT 0
-#define TSO_PARAM_DMAINT_MASK 0x0001
-#define TSO_PARAM_DMAINT_SHIFT 14
-#define TSO_PARAM_PKTNT_MASK 0x0001
-#define TSO_PARAM_PKTINT_SHIFT 15
-#define TSO_PARAM_VLANTAG_MASK 0xFFFF
-#define TSO_PARAM_VLAN_SHIFT 16
-
-/* tsopl defines */
-#define TSO_PARAM_EOP_MASK 0x0001
-#define TSO_PARAM_EOP_SHIFT 0
-#define TSO_PARAM_COALESCE_MASK 0x0001
-#define TSO_PARAM_COALESCE_SHIFT 1
-#define TSO_PARAM_INSVLAG_MASK 0x0001
-#define TSO_PARAM_INSVLAG_SHIFT 2
-#define TSO_PARAM_CUSTOMCKSUM_MASK 0x0001
-#define TSO_PARAM_CUSTOMCKSUM_SHIFT 3
-#define TSO_PARAM_SEGMENT_MASK 0x0001
-#define TSO_PARAM_SEGMENT_SHIFT 4
-#define TSO_PARAM_IPCKSUM_MASK 0x0001
-#define TSO_PARAM_IPCKSUM_SHIFT 5
-#define TSO_PARAM_TCPCKSUM_MASK 0x0001
-#define TSO_PARAM_TCPCKSUM_SHIFT 6
-#define TSO_PARAM_UDPCKSUM_MASK 0x0001
-#define TSO_PARAM_UDPCKSUM_SHIFT 7
-#define TSO_PARAM_VLANTAGGED_MASK 0x0001
-#define TSO_PARAM_VLANTAGGED_SHIFT 8
-#define TSO_PARAM_ETHTYPE_MASK 0x0001
-#define TSO_PARAM_ETHTYPE_SHIFT 9
-#define TSO_PARAM_IPHL_MASK 0x000F
-#define TSO_PARAM_IPHL_SHIFT 10
-#define TSO_PARAM_TCPHDRLEN_MASK 0x000F
-#define TSO_PARAM_TCPHDRLEN_SHIFT 14
-#define TSO_PARAM_HDRFLAG_MASK 0x0001
-#define TSO_PARAM_HDRFLAG_SHIFT 18
-#define TSO_PARAM_MSS_MASK 0x1FFF
-#define TSO_PARAM_MSS_SHIFT 19
-
-/* csumpu defines */
-#define CSUM_PARAM_BUFLEN_MASK 0x3FFF
-#define CSUM_PARAM_BUFLEN_SHIFT 0
-#define CSUM_PARAM_DMAINT_MASK 0x0001
-#define CSUM_PARAM_DMAINT_SHIFT 14
-#define CSUM_PARAM_PKTINT_MASK 0x0001
-#define CSUM_PARAM_PKTINT_SHIFT 15
-#define CSUM_PARAM_VALANTAG_MASK 0xFFFF
-#define CSUM_PARAM_VALAN_SHIFT 16
-
-/* csumpl defines*/
-#define CSUM_PARAM_EOP_MASK 0x0001
-#define CSUM_PARAM_EOP_SHIFT 0
-#define CSUM_PARAM_COALESCE_MASK 0x0001
-#define CSUM_PARAM_COALESCE_SHIFT 1
-#define CSUM_PARAM_INSVLAG_MASK 0x0001
-#define CSUM_PARAM_INSVLAG_SHIFT 2
-#define CSUM_PARAM_CUSTOMCKSUM_MASK 0x0001
-#define CSUM_PARAM_CUSTOMCKSUM_SHIFT 3
-#define CSUM_PARAM_SEGMENT_MASK 0x0001
-#define CSUM_PARAM_SEGMENT_SHIFT 4
-#define CSUM_PARAM_IPCKSUM_MASK 0x0001
-#define CSUM_PARAM_IPCKSUM_SHIFT 5
-#define CSUM_PARAM_TCPCKSUM_MASK 0x0001
-#define CSUM_PARAM_TCPCKSUM_SHIFT 6
-#define CSUM_PARAM_UDPCKSUM_MASK 0x0001
-#define CSUM_PARAM_UDPCKSUM_SHIFT 7
-#define CSUM_PARAM_VLANTAGGED_MASK 0x0001
-#define CSUM_PARAM_VLANTAGGED_SHIFT 8
-#define CSUM_PARAM_ETHTYPE_MASK 0x0001
-#define CSUM_PARAM_ETHTYPE_SHIFT 9
-#define CSUM_PARAM_IPHL_MASK 0x000F
-#define CSUM_PARAM_IPHL_SHIFT 10
-#define CSUM_PARAM_PLOADOFFSET_MASK 0x00FF
-#define CSUM_PARAM_PLOADOFFSET_SHIFT 16
-#define CSUM_PARAM_XSUMOFFSET_MASK 0x00FF
-#define CSUM_PARAM_XSUMOFFSET_SHIFT 24
-
-/* TPD descriptor */
-struct tso_param {
- /* The order of these declarations is important -- don't change it */
- u32 tsopu; /* tso_param upper word */
- u32 tsopl; /* tso_param lower word */
-};
-
-struct csum_param {
- /* The order of these declarations is important -- don't change it */
- u32 csumpu; /* csum_param upper word */
- u32 csumpl; /* csum_param lower word */
-};
-
-union tpd_descr {
- u64 data;
- struct csum_param csum;
- struct tso_param tso;
-};
-
-struct tx_packet_desc {
- __le64 buffer_addr;
- union tpd_descr desc;
-};
-
-/* DMA Order Settings */
-enum atl1_dma_order {
- atl1_dma_ord_in = 1,
- atl1_dma_ord_enh = 2,
- atl1_dma_ord_out = 4
-};
-
-enum atl1_dma_rcb {
- atl1_rcb_64 = 0,
- atl1_rcb_128 = 1
-};
-
-enum atl1_dma_req_block {
- atl1_dma_req_128 = 0,
- atl1_dma_req_256 = 1,
- atl1_dma_req_512 = 2,
- atl1_dma_req_1024 = 3,
- atl1_dma_req_2048 = 4,
- atl1_dma_req_4096 = 5
-};
-
-struct atl1_spi_flash_dev {
- const char *manu_name; /* manufacturer id */
- /* op-code */
- u8 cmd_wrsr;
- u8 cmd_read;
- u8 cmd_program;
- u8 cmd_wren;
- u8 cmd_wrdi;
- u8 cmd_rdsr;
- u8 cmd_rdid;
- u8 cmd_sector_erase;
- u8 cmd_chip_erase;
-};
-
-#endif /* _ATL1_HW_H_ */
diff --git a/drivers/net/atl1/atl1_param.c b/drivers/net/atl1/atl1_param.c
deleted file mode 100644
index 4246bb9bd50eb9cad5ab4419f08da20d065defac..0000000000000000000000000000000000000000
--- a/drivers/net/atl1/atl1_param.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook
- * Copyright(c) 2006 Jay Cliburn
- *
- * Derived from Intel e1000 driver
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include
-#include
-#include
-#include "atl1.h"
-
-/*
- * This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-#define ATL1_MAX_NIC 4
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
-
-/*
- * Interrupt Moderate Timer in units of 2 us
- *
- * Valid Range: 10-65535
- *
- * Default Value: 100 (200us)
- */
-static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_int_mod_timer = 0;
-module_param_array_named(int_mod_timer, int_mod_timer, int, &num_int_mod_timer, 0);
-MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
-
-/*
- * flash_vendor
- *
- * Valid Range: 0-2
- *
- * 0 - Atmel
- * 1 - SST
- * 2 - ST
- *
- * Default Value: 0
- */
-static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_flash_vendor = 0;
-module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
-MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
-
-#define DEFAULT_INT_MOD_CNT 100 /* 200us */
-#define MAX_INT_MOD_CNT 65000
-#define MIN_INT_MOD_CNT 50
-
-#define FLASH_VENDOR_DEFAULT 0
-#define FLASH_VENDOR_MIN 0
-#define FLASH_VENDOR_MAX 2
-
-struct atl1_option {
- enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- struct atl1_opt_list {
- int i;
- char *str;
- } *p;
- } l;
- } arg;
-};
-
-static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- dev_info(&pdev->dev, "%s enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- dev_info(&pdev->dev, "%s disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- dev_info(&pdev->dev, "%s set to %i\n", opt->name,
- *value);
- return 0;
- }
- break;
- case list_option:{
- int i;
- struct atl1_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- dev_info(&pdev->dev, "%s\n",
- ent->str);
- return 0;
- }
- }
- }
- break;
-
- default:
- break;
- }
-
- dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
- opt->name, *value, opt->err);
- *value = opt->def;
- return -1;
-}
-
-/*
- * atl1_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- */
-void __devinit atl1_check_options(struct atl1_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- int bd = adapter->bd_number;
- if (bd >= ATL1_MAX_NIC) {
- dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
- dev_notice(&pdev->dev, "using defaults for all values\n");
- }
- { /* Interrupt Moderate Timer */
- struct atl1_option opt = {
- .type = range_option,
- .name = "Interrupt Moderator Timer",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_INT_MOD_CNT),
- .def = DEFAULT_INT_MOD_CNT,
- .arg = {.r =
- {.min = MIN_INT_MOD_CNT,.max = MAX_INT_MOD_CNT}}
- };
- int val;
- if (num_int_mod_timer > bd) {
- val = int_mod_timer[bd];
- atl1_validate_option(&val, &opt, pdev);
- adapter->imt = (u16) val;
- } else
- adapter->imt = (u16) (opt.def);
- }
-
- { /* Flash Vendor */
- struct atl1_option opt = {
- .type = range_option,
- .name = "SPI Flash Vendor",
- .err = "using default of "
- __MODULE_STRING(FLASH_VENDOR_DEFAULT),
- .def = DEFAULT_INT_MOD_CNT,
- .arg = {.r =
- {.min = FLASH_VENDOR_MIN,.max =
- FLASH_VENDOR_MAX}}
- };
- int val;
- if (num_flash_vendor > bd) {
- val = flash_vendor[bd];
- atl1_validate_option(&val, &opt, pdev);
- adapter->hw.flash_vendor = (u8) val;
- } else
- adapter->hw.flash_vendor = (u8) (opt.def);
- }
-}
diff --git a/drivers/net/atlx/Makefile b/drivers/net/atlx/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..ca45553a040d2e0e6d55eef94301764e9a15c1b9
--- /dev/null
+++ b/drivers/net/atlx/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ATL1) += atl1.o
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atlx/atl1.c
similarity index 57%
rename from drivers/net/atl1/atl1_main.c
rename to drivers/net/atlx/atl1.c
index 129b8b3aa7731632853e331ee422435ef419efd3..5586fc62468880a0df991cd72d461bf6e5ab77a3 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atlx/atl1.c
@@ -1,6 +1,6 @@
/*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
- * Copyright(c) 2006 Chris Snook
+ * Copyright(c) 2006 - 2007 Chris Snook
* Copyright(c) 2006 Jay Cliburn
*
* Derived from Intel e1000 driver
@@ -36,7 +36,6 @@
* A very incomplete list of things that need to be dealt with:
*
* TODO:
- * Fix TSO; tx performance is horrible with TSO enabled.
* Wake on LAN.
* Add more ethtool functions.
* Fix abstruse irq enable/disable condition described here:
@@ -50,62 +49,768 @@
* SMP torture testing
*/
-#include
-#include
-#include
-#include
-#include
-#include
-#include
+#include
+#include
+
+#include
+#include
+#include
+#include
#include
-#include
-#include
-#include
-#include
-#include
-#include
#include
+#include
+#include
+#include
#include
+#include
#include
-#include
+#include
+#include
+#include
+#include
+#include
#include
+#include
+#include
+#include
#include
-#include
-#include
+#include
+#include
+#include
+#include
#include
-#include
-#include
-#include
+#include
+#include
+#include
+
#include
-#include
-#include
+#include "atl1.h"
+
+/* Temporary hack for merging atl1 and atl2 */
+#include "atlx.c"
+
+/*
+ * atl1_pci_tbl - PCI Device ID Table
+ */
+static const struct pci_device_id atl1_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
+ /* required last entry */
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);
+
+static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
+
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : 0 or idle status (if error)
+ */
+static s32 atl1_reset_hw(struct atl1_hw *hw)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ struct atl1_adapter *adapter = hw->back;
+ u32 icr;
+ int i;
+
+ /*
+ * Clear Interrupt mask to stop board from generating
+ * interrupts & Clear any pending interrupt events
+ */
+ /*
+ * iowrite32(0, hw->hw_addr + REG_IMR);
+ * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
+ */
+
+ /*
+ * Issue Soft Reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
+ ioread32(hw->hw_addr + REG_MASTER_CTRL);
+
+ iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
+ ioread16(hw->hw_addr + REG_PHY_ENABLE);
+
+ /* delay about 1ms */
+ msleep(1);
+
+ /* Wait at least 10ms for All module to be Idle */
+ for (i = 0; i < 10; i++) {
+ icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
+ if (!icr)
+ break;
+ /* delay 1 ms */
+ msleep(1);
+ /* FIXME: still the right way to do this? */
+ cpu_relax();
+ }
+
+ if (icr) {
+ if (netif_msg_hw(adapter))
+ dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
+ return icr;
+ }
+
+ return 0;
+}
+
+/* function about EEPROM
+ *
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ */
+static int atl1_check_eeprom_exist(struct atl1_hw *hw)
+{
+ u32 value;
+ value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
+ if (value & SPI_FLASH_CTRL_EN_VPD) {
+ value &= ~SPI_FLASH_CTRL_EN_VPD;
+ iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
+ }
+
+ value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
+ return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
+{
+ int i;
+ u32 control;
+
+ if (offset & 3)
+ /* address do not align */
+ return false;
+
+ iowrite32(0, hw->hw_addr + REG_VPD_DATA);
+ control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+ iowrite32(control, hw->hw_addr + REG_VPD_CAP);
+ ioread32(hw->hw_addr + REG_VPD_CAP);
+
+ for (i = 0; i < 10; i++) {
+ msleep(2);
+ control = ioread32(hw->hw_addr + REG_VPD_CAP);
+ if (control & VPD_CAP_VPD_FLAG)
+ break;
+ }
+ if (control & VPD_CAP_VPD_FLAG) {
+ *p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
+ return true;
+ }
+ /* timeout */
+ return false;
+}
+
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+ u32 val;
+ int i;
+
+ val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+ MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
+ MDIO_CLK_SEL_SHIFT;
+ iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
+ ioread32(hw->hw_addr + REG_MDIO_CTRL);
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+ if (!(val & (MDIO_START | MDIO_BUSY))) {
+ *phy_data = (u16) val;
+ return 0;
+ }
+ return ATLX_ERR_PHY;
+}
+
+#define CUSTOM_SPI_CS_SETUP 2
+#define CUSTOM_SPI_CLK_HI 2
+#define CUSTOM_SPI_CLK_LO 2
+#define CUSTOM_SPI_CS_HOLD 2
+#define CUSTOM_SPI_CS_HI 3
+
+static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
+{
+ int i;
+ u32 value;
+
+ iowrite32(0, hw->hw_addr + REG_SPI_DATA);
+ iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
+
+ value = SPI_FLASH_CTRL_WAIT_READY |
+ (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
+ SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
+ SPI_FLASH_CTRL_CLK_HI_MASK) <<
+ SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
+ SPI_FLASH_CTRL_CLK_LO_MASK) <<
+ SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
+ SPI_FLASH_CTRL_CS_HOLD_MASK) <<
+ SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
+ SPI_FLASH_CTRL_CS_HI_MASK) <<
+ SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
+ SPI_FLASH_CTRL_INS_SHIFT;
+
+ iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
+
+ value |= SPI_FLASH_CTRL_START;
+ iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
+ ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
+
+ for (i = 0; i < 10; i++) {
+ msleep(1);
+ value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
+ if (!(value & SPI_FLASH_CTRL_START))
+ break;
+ }
+
+ if (value & SPI_FLASH_CTRL_START)
+ return false;
+
+ *buf = ioread32(hw->hw_addr + REG_SPI_DATA);
+
+ return true;
+}
+
+/*
+ * get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int atl1_get_permanent_address(struct atl1_hw *hw)
+{
+ u32 addr[2];
+ u32 i, control;
+ u16 reg;
+ u8 eth_addr[ETH_ALEN];
+ bool key_valid;
+
+ if (is_valid_ether_addr(hw->perm_mac_addr))
+ return 0;
+
+ /* init */
+ addr[0] = addr[1] = 0;
+
+ if (!atl1_check_eeprom_exist(hw)) {
+ reg = 0;
+ key_valid = false;
+ /* Read out all EEPROM content */
+ i = 0;
+ while (1) {
+ if (atl1_read_eeprom(hw, i + 0x100, &control)) {
+ if (key_valid) {
+ if (reg == REG_MAC_STA_ADDR)
+ addr[0] = control;
+ else if (reg == (REG_MAC_STA_ADDR + 4))
+ addr[1] = control;
+ key_valid = false;
+ } else if ((control & 0xff) == 0x5A) {
+ key_valid = true;
+ reg = (u16) (control >> 16);
+ } else
+ break;
+ } else
+ /* read error */
+ break;
+ i += 4;
+ }
+
+ *(u32 *) ð_addr[2] = swab32(addr[0]);
+ *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+ return 1;
+ }
+
+ /* see if SPI FLAGS exist ? */
+ addr[0] = addr[1] = 0;
+ reg = 0;
+ key_valid = false;
+ i = 0;
+ while (1) {
+ if (atl1_spi_read(hw, i + 0x1f000, &control)) {
+ if (key_valid) {
+ if (reg == REG_MAC_STA_ADDR)
+ addr[0] = control;
+ else if (reg == (REG_MAC_STA_ADDR + 4))
+ addr[1] = control;
+ key_valid = false;
+ } else if ((control & 0xff) == 0x5A) {
+ key_valid = true;
+ reg = (u16) (control >> 16);
+ } else
+ /* data end */
+ break;
+ } else
+ /* read error */
+ break;
+ i += 4;
+ }
+
+ *(u32 *) ð_addr[2] = swab32(addr[0]);
+ *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+
+ /*
+ * On some motherboards, the MAC address is written by the
+ * BIOS directly to the MAC register during POST, and is
+ * not stored in eeprom. If all else thus far has failed
+ * to fetch the permanent MAC address, try reading it directly.
+ */
+ addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
+ addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
+ *(u32 *) ð_addr[2] = swab32(addr[0]);
+ *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ * hw - Struct containing variables accessed by shared code
+ */
+s32 atl1_read_mac_addr(struct atl1_hw *hw)
+{
+ u16 i;
+
+ if (atl1_get_permanent_address(hw))
+ random_ether_addr(hw->perm_mac_addr);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return 0;
+}
+
+/*
+ * Hashes an address to determine its location in the multicast table
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *
+ * atl1_hash_mc_addr
+ * purpose
+ * set hash value for a multicast address
+ * hash calcu processing :
+ * 1. calcu 32bit CRC for multicast address
+ * 2. reverse crc with MSB to LSB
+ */
+u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
+{
+ u32 crc32, value = 0;
+ int i;
+
+ crc32 = ether_crc_le(6, mc_addr);
+ for (i = 0; i < 32; i++)
+ value |= (((crc32 >> i) & 1) << (31 - i));
+
+ return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+
+ /*
+ * The HASH Table is a register array of 2 32-bit registers.
+ * It is treated like an array of 64 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 31) & 0x1;
+ hash_bit = (hash_value >> 26) & 0x1F;
+ mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
+ mta |= (1 << hash_bit);
+ iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ int i;
+ u32 val;
+
+ val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+ (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+ MDIO_SUP_PREAMBLE |
+ MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+ iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
+ ioread32(hw->hw_addr + REG_MDIO_CTRL);
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ return 0;
+
+ return ATLX_ERR_PHY;
+}
+
+/*
+ * Make L001's PHY out of Power Saving State (bug)
+ * hw - Struct containing variables accessed by shared code
+ * when power on, L001's PHY always on Power saving State
+ * (Gigabit Link forbidden)
+ */
+static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
+{
+ s32 ret;
+ ret = atl1_write_phy_reg(hw, 29, 0x0029);
+ if (ret)
+ return ret;
+ return atl1_write_phy_reg(hw, 30, 0);
+}
+
+/*
+ *TODO: do something or get rid of this
+ */
+#ifdef CONFIG_PM
+static s32 atl1_phy_enter_power_saving(struct atl1_hw *hw)
+{
+/* s32 ret_val;
+ * u16 phy_data;
+ */
+
+/*
+ ret_val = atl1_write_phy_reg(hw, ...);
+ ret_val = atl1_write_phy_reg(hw, ...);
+ ....
+*/
+ return 0;
+}
+#endif
+
+/*
+ * Resets the PHY and make all config validate
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
+ */
+static s32 atl1_phy_reset(struct atl1_hw *hw)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ struct atl1_adapter *adapter = hw->back;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL)
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
+ MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default:
+ /* MEDIA_TYPE_10M_HALF: */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ }
+ }
+
+ ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+ if (ret_val) {
+ u32 val;
+ int i;
+ /* pcie serdes link may be down! */
+ if (netif_msg_hw(adapter))
+ dev_dbg(&pdev->dev, "pcie phy link down\n");
+
+ for (i = 0; i < 25; i++) {
+ msleep(1);
+ val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
+ if (netif_msg_hw(adapter))
+ dev_warn(&pdev->dev,
+ "pcie link down at least 25ms\n");
+ return ret_val;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ * hw - Struct containing variables accessed by shared code
+ */
+static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
+{
+ s32 ret_val;
+ s16 mii_autoneg_adv_reg;
+ s16 mii_1000t_ctrl_reg;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
+
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
+
+ /*
+ * Need to parse media_type and set up
+ * the appropriate PHY registers.
+ */
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
+ MII_AR_10T_FD_CAPS |
+ MII_AR_100TX_HD_CAPS |
+ MII_AR_100TX_FD_CAPS);
+ mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_1000M_FULL:
+ mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_100M_FULL:
+ mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_100M_HALF:
+ mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
+ break;
+
+ case MEDIA_TYPE_10M_FULL:
+ mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
+ break;
+
+ default:
+ mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
+ break;
+ }
+
+ /* flow control fixed to enable all */
+ mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
+
+ hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+ hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
+
+ ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ return 0;
+}
+
+/*
+ * Configures link settings.
+ * hw - Struct containing variables accessed by shared code
+ * Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ */
+static s32 atl1_setup_link(struct atl1_hw *hw)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ struct atl1_adapter *adapter = hw->back;
+ s32 ret_val;
+
+ /*
+ * Options:
+ * PHY will advertise value(s) parsed from
+ * autoneg_advertised and fc
+ * no matter what autoneg is , We will not wait link result.
+ */
+ ret_val = atl1_phy_setup_autoneg_adv(hw);
+ if (ret_val) {
+ if (netif_msg_link(adapter))
+ dev_dbg(&pdev->dev,
+ "error setting up autonegotiation\n");
+ return ret_val;
+ }
+ /* SW.Reset , En-Auto-Neg if needed */
+ ret_val = atl1_phy_reset(hw);
+ if (ret_val) {
+ if (netif_msg_link(adapter))
+ dev_dbg(&pdev->dev, "error resetting phy\n");
+ return ret_val;
+ }
+ hw->phy_configured = true;
+ return ret_val;
+}
-#include "atl1.h"
+static void atl1_init_flash_opcode(struct atl1_hw *hw)
+{
+ if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
+ /* Atmel */
+ hw->flash_vendor = 0;
+
+ /* Init OP table */
+ iowrite8(flash_table[hw->flash_vendor].cmd_program,
+ hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
+ iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
+ hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
+ iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
+ hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
+ iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
+ hw->hw_addr + REG_SPI_FLASH_OP_RDID);
+ iowrite8(flash_table[hw->flash_vendor].cmd_wren,
+ hw->hw_addr + REG_SPI_FLASH_OP_WREN);
+ iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
+ hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
+ iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
+ hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
+ iowrite8(flash_table[hw->flash_vendor].cmd_read,
+ hw->hw_addr + REG_SPI_FLASH_OP_READ);
+}
-#define DRIVER_VERSION "2.0.7"
+/*
+ * Performs basic configuration of the adapter.
+ * hw - Struct containing variables accessed by shared code
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes multicast table,
+ * and Calls routines to setup link
+ * Leaves the transmit and receive units disabled and uninitialized.
+ */
+static s32 atl1_init_hw(struct atl1_hw *hw)
+{
+ u32 ret_val = 0;
-char atl1_driver_name[] = "atl1";
-static const char atl1_driver_string[] = "Attansic L1 Ethernet Network Driver";
-static const char atl1_copyright[] = "Copyright(c) 2005-2006 Attansic Corporation.";
-char atl1_driver_version[] = DRIVER_VERSION;
+ /* Zero out the Multicast HASH table */
+ iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
+ /* clear the old settings from the multicast hash table */
+ iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
-MODULE_AUTHOR
- ("Attansic Corporation , Chris Snook , Jay Cliburn ");
-MODULE_DESCRIPTION("Attansic 1000M Ethernet Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRIVER_VERSION);
+ atl1_init_flash_opcode(hw);
+
+ if (!hw->phy_configured) {
+ /* enable GPHY LinkChange Interrrupt */
+ ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
+ if (ret_val)
+ return ret_val;
+ /* make PHY out of power-saving state */
+ ret_val = atl1_phy_leave_power_saving(hw);
+ if (ret_val)
+ return ret_val;
+ /* Call a subroutine to configure the link */
+ ret_val = atl1_setup_link(hw);
+ }
+ return ret_val;
+}
/*
- * atl1_pci_tbl - PCI Device ID Table
+ * Detects the current speed and duplex settings of the hardware.
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
*/
-static const struct pci_device_id atl1_pci_tbl[] = {
- {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
- /* required last entry */
- {0,}
-};
+static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
+{
+ struct pci_dev *pdev = hw->back->pdev;
+ struct atl1_adapter *adapter = hw->back;
+ s32 ret_val;
+ u16 phy_data;
-MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);
+ /* ; --- Read PHY Specific Status Register (17) */
+ ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
+ return ATLX_ERR_PHY_RES;
+
+ switch (phy_data & MII_ATLX_PSSR_SPEED) {
+ case MII_ATLX_PSSR_1000MBS:
+ *speed = SPEED_1000;
+ break;
+ case MII_ATLX_PSSR_100MBS:
+ *speed = SPEED_100;
+ break;
+ case MII_ATLX_PSSR_10MBS:
+ *speed = SPEED_10;
+ break;
+ default:
+ if (netif_msg_hw(adapter))
+ dev_dbg(&pdev->dev, "error getting speed\n");
+ return ATLX_ERR_PHY_SPEED;
+ break;
+ }
+ if (phy_data & MII_ATLX_PSSR_DPLX)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return 0;
+}
+
+void atl1_set_mac_addr(struct atl1_hw *hw)
+{
+ u32 value;
+ /*
+ * 00-0B-6A-F6-00-DC
+ * 0: 6AF600DC 1: 000B
+ * low dword
+ */
+ value = (((u32) hw->mac_addr[2]) << 24) |
+ (((u32) hw->mac_addr[3]) << 16) |
+ (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
+ iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
+ /* high dword */
+ value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
+ iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
+}
/*
* atl1_sw_init - Initialize general software structures (struct atl1_adapter)
@@ -125,7 +830,7 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
adapter->wol = 0;
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
- adapter->ict = 50000; /* 100ms */
+ adapter->ict = 50000; /* 100ms */
adapter->link_speed = SPEED_0; /* hardware init */
adapter->link_duplex = FULL_DUPLEX;
@@ -205,31 +910,13 @@ static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
return retval;
}
-/*
- * atl1_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
- */
-static int atl1_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- return atl1_mii_ioctl(netdev, ifr, cmd);
- default:
- return -EOPNOTSUPP;
- }
-}
-
/*
* atl1_setup_mem_resources - allocate Tx / RX descriptor resources
* @adapter: board private structure
*
* Return 0 on success, negative on failure
*/
-s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
+static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
{
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
@@ -242,13 +929,16 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
if (unlikely(!tpd_ring->buffer_info)) {
- dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size);
+ if (netif_msg_drv(adapter))
+ dev_err(&pdev->dev, "kzalloc failed , size = D%d\n",
+ size);
goto err_nomem;
}
rfd_ring->buffer_info =
(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
- /* real ring DMA buffer
+ /*
+ * real ring DMA buffer
* each ring/block may need up to 8 bytes for alignment, hence the
* additional 40 bytes tacked onto the end.
*/
@@ -263,7 +953,8 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
&ring_header->dma);
if (unlikely(!ring_header->desc)) {
- dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
+ if (netif_msg_drv(adapter))
+ dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
goto err_nomem;
}
@@ -307,7 +998,7 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
((u8 *) adapter->cmb.cmb +
(sizeof(struct coals_msg_block) + offset));
- return ATL1_SUCCESS;
+ return 0;
err_nomem:
kfree(tpd_ring->buffer_info);
@@ -416,7 +1107,7 @@ static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
*
* Free all transmit software resources
*/
-void atl1_free_ring_resources(struct atl1_adapter *adapter)
+static void atl1_free_ring_resources(struct atl1_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
@@ -481,31 +1172,6 @@ static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
}
-/*
- * atl1_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- */
-static int atl1_set_mac(struct net_device *netdev, void *p)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct sockaddr *addr = p;
-
- if (netif_running(netdev))
- return -EBUSY;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
-
- atl1_set_mac_addr(&adapter->hw);
- return 0;
-}
-
static u32 atl1_check_link(struct atl1_adapter *adapter)
{
struct atl1_hw *hw = &adapter->hw;
@@ -517,14 +1183,17 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
/* MII_BMSR must read twice */
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
- if (!(phy_data & BMSR_LSTATUS)) { /* link down */
- if (netif_carrier_ok(netdev)) { /* old link state: Up */
- dev_info(&adapter->pdev->dev, "link is down\n");
+ if (!(phy_data & BMSR_LSTATUS)) {
+ /* link down */
+ if (netif_carrier_ok(netdev)) {
+ /* old link state: Up */
+ if (netif_msg_link(adapter))
+ dev_info(&adapter->pdev->dev, "link is down\n");
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
- return ATL1_SUCCESS;
+ return 0;
}
/* Link Up */
@@ -562,20 +1231,22 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
adapter->link_speed = speed;
adapter->link_duplex = duplex;
atl1_setup_mac_ctrl(adapter);
- dev_info(&adapter->pdev->dev,
- "%s link is up %d Mbps %s\n",
- netdev->name, adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
- "full duplex" : "half duplex");
+ if (netif_msg_link(adapter))
+ dev_info(&adapter->pdev->dev,
+ "%s link is up %d Mbps %s\n",
+ netdev->name, adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "full duplex" : "half duplex");
}
- if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
+ if (!netif_carrier_ok(netdev)) {
+ /* Link down -> Up */
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
- return ATL1_SUCCESS;
+ return 0;
}
- /* change orignal link status */
+ /* change original link status */
if (netif_carrier_ok(netdev)) {
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
@@ -596,12 +1267,13 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
phy_data =
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
break;
- default: /* MEDIA_TYPE_10M_HALF: */
+ default:
+ /* MEDIA_TYPE_10M_HALF: */
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
break;
}
atl1_write_phy_reg(hw, MII_BMCR, phy_data);
- return ATL1_SUCCESS;
+ return 0;
}
/* auto-neg, insert timer to re-config phy */
@@ -610,103 +1282,6 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
mod_timer(&adapter->phy_config_timer, jiffies + 3 * HZ);
}
- return ATL1_SUCCESS;
-}
-
-static void atl1_check_for_link(struct atl1_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- u16 phy_data = 0;
-
- spin_lock(&adapter->lock);
- adapter->phy_timer_pending = false;
- atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
- atl1_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
- spin_unlock(&adapter->lock);
-
- /* notify upper layer link down ASAP */
- if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
- if (netif_carrier_ok(netdev)) { /* old link state: Up */
- dev_info(&adapter->pdev->dev, "%s link is down\n",
- netdev->name);
- adapter->link_speed = SPEED_0;
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- }
- }
- schedule_work(&adapter->link_chg_task);
-}
-
-/*
- * atl1_set_multi - Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
- */
-static void atl1_set_multi(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- struct atl1_hw *hw = &adapter->hw;
- struct dev_mc_list *mc_ptr;
- u32 rctl;
- u32 hash_value;
-
- /* Check for Promiscuous and All Multicast modes */
- rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
- if (netdev->flags & IFF_PROMISC)
- rctl |= MAC_CTRL_PROMIS_EN;
- else if (netdev->flags & IFF_ALLMULTI) {
- rctl |= MAC_CTRL_MC_ALL_EN;
- rctl &= ~MAC_CTRL_PROMIS_EN;
- } else
- rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
-
- iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
-
- /* clear the old settings from the multicast hash table */
- iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
- iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
-
- /* compute mc addresses' hash value ,and put it into hash table */
- for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
- hash_value = atl1_hash_mc_addr(hw, mc_ptr->dmi_addr);
- atl1_hash_set(hw, hash_value);
- }
-}
-
-/*
- * atl1_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- */
-static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- int old_mtu = netdev->mtu;
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
-
- if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
- dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
- return -EINVAL;
- }
-
- adapter->hw.max_frame_size = max_frame;
- adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
- adapter->rx_buffer_len = (max_frame + 7) & ~7;
- adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;
-
- netdev->mtu = new_mtu;
- if ((old_mtu != new_mtu) && netif_running(netdev)) {
- atl1_down(adapter);
- atl1_up(adapter);
- }
-
return 0;
}
@@ -974,37 +1549,6 @@ static void atl1_via_workaround(struct atl1_adapter *adapter)
iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
}
-/*
- * atl1_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- */
-static void atl1_irq_enable(struct atl1_adapter *adapter)
-{
- iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
- ioread32(adapter->hw.hw_addr + REG_IMR);
-}
-
-/*
- * atl1_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- */
-static void atl1_irq_disable(struct atl1_adapter *adapter)
-{
- iowrite32(0, adapter->hw.hw_addr + REG_IMR);
- ioread32(adapter->hw.hw_addr + REG_IMR);
- synchronize_irq(adapter->pdev->irq);
-}
-
-static void atl1_clear_phy_int(struct atl1_adapter *adapter)
-{
- u16 phy_data;
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->lock, flags);
- atl1_read_phy_reg(&adapter->hw, 19, &phy_data);
- spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
static void atl1_inc_smb(struct atl1_adapter *adapter)
{
struct stats_msg_block *smb = adapter->smb.smb;
@@ -1076,19 +1620,6 @@ static void atl1_inc_smb(struct atl1_adapter *adapter)
adapter->soft_stats.tx_carrier_errors;
}
-/*
- * atl1_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- *
- * Returns the address of the device statistics structure.
- * The statistics are actually updated from the timer callback.
- */
-static struct net_device_stats *atl1_get_stats(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- return &adapter->net_stats;
-}
-
static void atl1_update_mailbox(struct atl1_adapter *adapter)
{
unsigned long flags;
@@ -1150,8 +1681,9 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter,
if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
ERR_FLAG_CODE | ERR_FLAG_OV)) {
adapter->hw_csum_err++;
- dev_printk(KERN_DEBUG, &pdev->dev,
- "rx checksum error\n");
+ if (netif_msg_rx_err(adapter))
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "rx checksum error\n");
return;
}
}
@@ -1170,9 +1702,10 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter,
}
/* IPv4, but hardware thinks its checksum is wrong */
- dev_printk(KERN_DEBUG, &pdev->dev,
- "hw csum wrong, pkt_flag:%x, err_flag:%x\n",
- rrd->pkt_flg, rrd->err_flg);
+ if (netif_msg_rx_err(adapter))
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "hw csum wrong, pkt_flag:%x, err_flag:%x\n",
+ rrd->pkt_flg, rrd->err_flg);
skb->ip_summed = CHECKSUM_COMPLETE;
skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum);
adapter->hw_csum_err++;
@@ -1210,7 +1743,8 @@ static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN);
- if (unlikely(!skb)) { /* Better luck next round */
+ if (unlikely(!skb)) {
+ /* Better luck next round */
adapter->net_stats.rx_dropped++;
break;
}
@@ -1281,18 +1815,39 @@ chk_rrd:
/* check rrd status */
if (likely(rrd->num_buf == 1))
goto rrd_ok;
+ else if (netif_msg_rx_err(adapter)) {
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "unexpected RRD buffer count\n");
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "rx_buf_len = %d\n",
+ adapter->rx_buffer_len);
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "RRD num_buf = %d\n",
+ rrd->num_buf);
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "RRD pkt_len = %d\n",
+ rrd->xsz.xsum_sz.pkt_size);
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "RRD pkt_flg = 0x%08X\n",
+ rrd->pkt_flg);
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "RRD err_flg = 0x%08X\n",
+ rrd->err_flg);
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "RRD vlan_tag = 0x%08X\n",
+ rrd->vlan_tag);
+ }
/* rrd seems to be bad */
if (unlikely(i-- > 0)) {
/* rrd may not be DMAed completely */
- dev_printk(KERN_DEBUG, &adapter->pdev->dev,
- "incomplete RRD DMA transfer\n");
udelay(1);
goto chk_rrd;
}
/* bad rrd */
- dev_printk(KERN_DEBUG, &adapter->pdev->dev,
- "bad RRD\n");
+ if (netif_msg_rx_err(adapter))
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "bad RRD\n");
/* see if update RFD index */
if (rrd->num_buf > 1)
atl1_update_rfd_index(adapter, rrd);
@@ -1411,8 +1966,6 @@ static void atl1_intr_tx(struct atl1_adapter *adapter)
dev_kfree_skb_irq(buffer_info->skb);
buffer_info->skb = NULL;
}
- tpd->buffer_addr = 0;
- tpd->desc.data = 0;
if (++sw_tpd_next_to_clean == tpd_ring->count)
sw_tpd_next_to_clean = 0;
@@ -1434,167 +1987,192 @@ static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
}
static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
- struct tso_param *tso)
+ struct tx_packet_desc *ptpd)
{
- /* We enter this function holding a spinlock. */
- u8 ipofst;
+ /* spinlock held */
+ u8 hdr_len, ip_off;
+ u32 real_len;
int err;
if (skb_shinfo(skb)->gso_size) {
if (skb_header_cloned(skb)) {
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
if (unlikely(err))
- return err;
+ return -1;
}
if (skb->protocol == ntohs(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
+ real_len = (((unsigned char *)iph - skb->data) +
+ ntohs(iph->tot_len));
+ if (real_len < skb->len)
+ pskb_trim(skb, real_len);
+ hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+ if (skb->len == hdr_len) {
+ iph->check = 0;
+ tcp_hdr(skb)->check =
+ ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, tcp_hdrlen(skb),
+ IPPROTO_TCP, 0);
+ ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
+ TPD_IPHL_SHIFT;
+ ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
+ TPD_TCPHDRLEN_MASK) <<
+ TPD_TCPHDRLEN_SHIFT;
+ ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT;
+ ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT;
+ return 1;
+ }
+
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0, IPPROTO_TCP, 0);
- ipofst = skb_network_offset(skb);
- if (ipofst != ETH_HLEN) /* 802.3 frame */
- tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT;
-
- tso->tsopl |= (iph->ihl &
- CSUM_PARAM_IPHL_MASK) << CSUM_PARAM_IPHL_SHIFT;
- tso->tsopl |= (tcp_hdrlen(skb) &
- TSO_PARAM_TCPHDRLEN_MASK) <<
- TSO_PARAM_TCPHDRLEN_SHIFT;
- tso->tsopl |= (skb_shinfo(skb)->gso_size &
- TSO_PARAM_MSS_MASK) << TSO_PARAM_MSS_SHIFT;
- tso->tsopl |= 1 << TSO_PARAM_IPCKSUM_SHIFT;
- tso->tsopl |= 1 << TSO_PARAM_TCPCKSUM_SHIFT;
- tso->tsopl |= 1 << TSO_PARAM_SEGMENT_SHIFT;
- return true;
+ iph->daddr, 0, IPPROTO_TCP, 0);
+ ip_off = (unsigned char *)iph -
+ (unsigned char *) skb_network_header(skb);
+ if (ip_off == 8) /* 802.3-SNAP frame */
+ ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT;
+ else if (ip_off != 0)
+ return -2;
+
+ ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
+ TPD_IPHL_SHIFT;
+ ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
+ TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT;
+ ptpd->word3 |= (skb_shinfo(skb)->gso_size &
+ TPD_MSS_MASK) << TPD_MSS_SHIFT;
+ ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
+ return 3;
}
}
return false;
}
static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
- struct csum_param *csum)
+ struct tx_packet_desc *ptpd)
{
u8 css, cso;
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
- cso = skb_transport_offset(skb);
- css = cso + skb->csum_offset;
- if (unlikely(cso & 0x1)) {
- dev_printk(KERN_DEBUG, &adapter->pdev->dev,
- "payload offset not an even number\n");
+ css = (u8) (skb->csum_start - skb_headroom(skb));
+ cso = css + (u8) skb->csum_offset;
+ if (unlikely(css & 0x1)) {
+ /* L1 hardware requires an even number here */
+ if (netif_msg_tx_err(adapter))
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "payload offset not an even number\n");
return -1;
}
- csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) <<
- CSUM_PARAM_PLOADOFFSET_SHIFT;
- csum->csumpl |= (css & CSUM_PARAM_XSUMOFFSET_MASK) <<
- CSUM_PARAM_XSUMOFFSET_SHIFT;
- csum->csumpl |= 1 << CSUM_PARAM_CUSTOMCKSUM_SHIFT;
+ ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) <<
+ TPD_PLOADOFFSET_SHIFT;
+ ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) <<
+ TPD_CCSUMOFFSET_SHIFT;
+ ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT;
return true;
}
-
- return true;
+ return 0;
}
static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
- bool tcp_seg)
+ struct tx_packet_desc *ptpd)
{
- /* We enter this function holding a spinlock. */
+ /* spinlock held */
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
struct atl1_buffer *buffer_info;
+ u16 buf_len = skb->len;
struct page *page;
- int first_buf_len = skb->len;
unsigned long offset;
unsigned int nr_frags;
unsigned int f;
- u16 tpd_next_to_use;
- u16 proto_hdr_len;
- u16 len12;
+ int retval;
+ u16 next_to_use;
+ u16 data_len;
+ u8 hdr_len;
- first_buf_len -= skb->data_len;
+ buf_len -= skb->data_len;
nr_frags = skb_shinfo(skb)->nr_frags;
- tpd_next_to_use = atomic_read(&tpd_ring->next_to_use);
- buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
+ next_to_use = atomic_read(&tpd_ring->next_to_use);
+ buffer_info = &tpd_ring->buffer_info[next_to_use];
if (unlikely(buffer_info->skb))
BUG();
- buffer_info->skb = NULL; /* put skb in last TPD */
-
- if (tcp_seg) {
- /* TSO/GSO */
- proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- buffer_info->length = proto_hdr_len;
+ /* put skb in last TPD */
+ buffer_info->skb = NULL;
+
+ retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
+ if (retval) {
+ /* TSO */
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ buffer_info->length = hdr_len;
page = virt_to_page(skb->data);
offset = (unsigned long)skb->data & ~PAGE_MASK;
buffer_info->dma = pci_map_page(adapter->pdev, page,
- offset, proto_hdr_len,
+ offset, hdr_len,
PCI_DMA_TODEVICE);
- if (++tpd_next_to_use == tpd_ring->count)
- tpd_next_to_use = 0;
+ if (++next_to_use == tpd_ring->count)
+ next_to_use = 0;
- if (first_buf_len > proto_hdr_len) {
- int i, m;
+ if (buf_len > hdr_len) {
+ int i, nseg;
- len12 = first_buf_len - proto_hdr_len;
- m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) /
+ data_len = buf_len - hdr_len;
+ nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) /
ATL1_MAX_TX_BUF_LEN;
- for (i = 0; i < m; i++) {
+ for (i = 0; i < nseg; i++) {
buffer_info =
- &tpd_ring->buffer_info[tpd_next_to_use];
+ &tpd_ring->buffer_info[next_to_use];
buffer_info->skb = NULL;
buffer_info->length =
(ATL1_MAX_TX_BUF_LEN >=
- len12) ? ATL1_MAX_TX_BUF_LEN : len12;
- len12 -= buffer_info->length;
+ data_len) ? ATL1_MAX_TX_BUF_LEN : data_len;
+ data_len -= buffer_info->length;
page = virt_to_page(skb->data +
- (proto_hdr_len +
- i * ATL1_MAX_TX_BUF_LEN));
+ (hdr_len + i * ATL1_MAX_TX_BUF_LEN));
offset = (unsigned long)(skb->data +
- (proto_hdr_len +
- i * ATL1_MAX_TX_BUF_LEN)) & ~PAGE_MASK;
+ (hdr_len + i * ATL1_MAX_TX_BUF_LEN)) &
+ ~PAGE_MASK;
buffer_info->dma = pci_map_page(adapter->pdev,
page, offset, buffer_info->length,
PCI_DMA_TODEVICE);
- if (++tpd_next_to_use == tpd_ring->count)
- tpd_next_to_use = 0;
+ if (++next_to_use == tpd_ring->count)
+ next_to_use = 0;
}
}
} else {
- /* not TSO/GSO */
- buffer_info->length = first_buf_len;
+ /* not TSO */
+ buffer_info->length = buf_len;
page = virt_to_page(skb->data);
offset = (unsigned long)skb->data & ~PAGE_MASK;
buffer_info->dma = pci_map_page(adapter->pdev, page,
- offset, first_buf_len, PCI_DMA_TODEVICE);
- if (++tpd_next_to_use == tpd_ring->count)
- tpd_next_to_use = 0;
+ offset, buf_len, PCI_DMA_TODEVICE);
+ if (++next_to_use == tpd_ring->count)
+ next_to_use = 0;
}
for (f = 0; f < nr_frags; f++) {
struct skb_frag_struct *frag;
- u16 lenf, i, m;
+ u16 i, nseg;
frag = &skb_shinfo(skb)->frags[f];
- lenf = frag->size;
+ buf_len = frag->size;
- m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
- for (i = 0; i < m; i++) {
- buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
+ nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) /
+ ATL1_MAX_TX_BUF_LEN;
+ for (i = 0; i < nseg; i++) {
+ buffer_info = &tpd_ring->buffer_info[next_to_use];
if (unlikely(buffer_info->skb))
BUG();
buffer_info->skb = NULL;
- buffer_info->length = (lenf > ATL1_MAX_TX_BUF_LEN) ?
- ATL1_MAX_TX_BUF_LEN : lenf;
- lenf -= buffer_info->length;
+ buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
+ ATL1_MAX_TX_BUF_LEN : buf_len;
+ buf_len -= buffer_info->length;
buffer_info->dma = pci_map_page(adapter->pdev,
frag->page,
frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
buffer_info->length, PCI_DMA_TODEVICE);
- if (++tpd_next_to_use == tpd_ring->count)
- tpd_next_to_use = 0;
+ if (++next_to_use == tpd_ring->count)
+ next_to_use = 0;
}
}
@@ -1602,39 +2180,44 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
buffer_info->skb = skb;
}
-static void atl1_tx_queue(struct atl1_adapter *adapter, int count,
- union tpd_descr *descr)
+static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count,
+ struct tx_packet_desc *ptpd)
{
- /* We enter this function holding a spinlock. */
+ /* spinlock held */
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
- int j;
- u32 val;
struct atl1_buffer *buffer_info;
struct tx_packet_desc *tpd;
- u16 tpd_next_to_use = atomic_read(&tpd_ring->next_to_use);
+ u16 j;
+ u32 val;
+ u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use);
for (j = 0; j < count; j++) {
- buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
- tpd = ATL1_TPD_DESC(&adapter->tpd_ring, tpd_next_to_use);
- tpd->desc.csum.csumpu = descr->csum.csumpu;
- tpd->desc.csum.csumpl = descr->csum.csumpl;
- tpd->desc.tso.tsopu = descr->tso.tsopu;
- tpd->desc.tso.tsopl = descr->tso.tsopl;
+ buffer_info = &tpd_ring->buffer_info[next_to_use];
+ tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use);
+ if (tpd != ptpd)
+ memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
- tpd->desc.data = descr->data;
- tpd->desc.csum.csumpu |= (cpu_to_le16(buffer_info->length) &
- CSUM_PARAM_BUFLEN_MASK) << CSUM_PARAM_BUFLEN_SHIFT;
+ tpd->word2 = (cpu_to_le16(buffer_info->length) &
+ TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;
- val = (descr->tso.tsopl >> TSO_PARAM_SEGMENT_SHIFT) &
- TSO_PARAM_SEGMENT_MASK;
- if (val && !j)
- tpd->desc.tso.tsopl |= 1 << TSO_PARAM_HDRFLAG_SHIFT;
+ /*
+ * if this is the first packet in a TSO chain, set
+ * TPD_HDRFLAG, otherwise, clear it.
+ */
+ val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) &
+ TPD_SEGMENT_EN_MASK;
+ if (val) {
+ if (!j)
+ tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
+ else
+ tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT);
+ }
if (j == (count - 1))
- tpd->desc.csum.csumpl |= 1 << CSUM_PARAM_EOP_SHIFT;
+ tpd->word3 |= 1 << TPD_EOP_SHIFT;
- if (++tpd_next_to_use == tpd_ring->count)
- tpd_next_to_use = 0;
+ if (++next_to_use == tpd_ring->count)
+ next_to_use = 0;
}
/*
* Force memory writes to complete before letting h/w
@@ -1644,18 +2227,18 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, int count,
*/
wmb();
- atomic_set(&tpd_ring->next_to_use, (int)tpd_next_to_use);
+ atomic_set(&tpd_ring->next_to_use, next_to_use);
}
static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
int len = skb->len;
int tso;
int count = 1;
int ret_val;
- u32 val;
- union tpd_descr param;
+ struct tx_packet_desc *ptpd;
u16 frag_size;
u16 vlan_tag;
unsigned long flags;
@@ -1666,18 +2249,11 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
len -= skb->data_len;
- if (unlikely(skb->len == 0)) {
+ if (unlikely(skb->len <= 0)) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
- param.data = 0;
- param.tso.tsopu = 0;
- param.tso.tsopl = 0;
- param.csum.csumpu = 0;
- param.csum.csumpl = 0;
-
- /* nr_frags will be nonzero if we're doing scatter/gather (SG) */
nr_frags = skb_shinfo(skb)->nr_frags;
for (f = 0; f < nr_frags; f++) {
frag_size = skb_shinfo(skb)->frags[f].size;
@@ -1686,10 +2262,9 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
ATL1_MAX_TX_BUF_LEN;
}
- /* mss will be nonzero if we're doing segment offload (TSO/GSO) */
mss = skb_shinfo(skb)->gso_size;
if (mss) {
- if (skb->protocol == htons(ETH_P_IP)) {
+ if (skb->protocol == ntohs(ETH_P_IP)) {
proto_hdr_len = (skb_transport_offset(skb) +
tcp_hdrlen(skb));
if (unlikely(proto_hdr_len > len)) {
@@ -1706,7 +2281,9 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if (!spin_trylock_irqsave(&adapter->lock, flags)) {
/* Can't get lock - tell upper layer to requeue */
- dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx locked\n");
+ if (netif_msg_tx_queued(adapter))
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "tx locked\n");
return NETDEV_TX_LOCKED;
}
@@ -1714,22 +2291,26 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
/* not enough descriptors */
netif_stop_queue(netdev);
spin_unlock_irqrestore(&adapter->lock, flags);
- dev_printk(KERN_DEBUG, &adapter->pdev->dev, "tx busy\n");
+ if (netif_msg_tx_queued(adapter))
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "tx busy\n");
return NETDEV_TX_BUSY;
}
- param.data = 0;
+ ptpd = ATL1_TPD_DESC(tpd_ring,
+ (u16) atomic_read(&tpd_ring->next_to_use));
+ memset(ptpd, 0, sizeof(struct tx_packet_desc));
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
vlan_tag = vlan_tx_tag_get(skb);
vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
((vlan_tag >> 9) & 0x8);
- param.csum.csumpl |= 1 << CSUM_PARAM_INSVLAG_SHIFT;
- param.csum.csumpu |= (vlan_tag & CSUM_PARAM_VALANTAG_MASK) <<
- CSUM_PARAM_VALAN_SHIFT;
+ ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
+ ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) <<
+ TPD_VL_TAGGED_SHIFT;
}
- tso = atl1_tso(adapter, skb, ¶m.tso);
+ tso = atl1_tso(adapter, skb, ptpd);
if (tso < 0) {
spin_unlock_irqrestore(&adapter->lock, flags);
dev_kfree_skb_any(skb);
@@ -1737,7 +2318,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
if (!tso) {
- ret_val = atl1_tx_csum(adapter, skb, ¶m.csum);
+ ret_val = atl1_tx_csum(adapter, skb, ptpd);
if (ret_val < 0) {
spin_unlock_irqrestore(&adapter->lock, flags);
dev_kfree_skb_any(skb);
@@ -1745,13 +2326,11 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
}
- val = (param.csum.csumpl >> CSUM_PARAM_SEGMENT_SHIFT) &
- CSUM_PARAM_SEGMENT_MASK;
- atl1_tx_map(adapter, skb, 1 == val);
- atl1_tx_queue(adapter, count, ¶m);
- netdev->trans_start = jiffies;
- spin_unlock_irqrestore(&adapter->lock, flags);
+ atl1_tx_map(adapter, skb, ptpd);
+ atl1_tx_queue(adapter, count, ptpd);
atl1_update_mailbox(adapter);
+ spin_unlock_irqrestore(&adapter->lock, flags);
+ netdev->trans_start = jiffies;
return NETDEV_TX_OK;
}
@@ -1776,7 +2355,7 @@ static irqreturn_t atl1_intr(int irq, void *data)
adapter->cmb.cmb->int_stats = 0;
if (status & ISR_GPHY) /* clear phy status */
- atl1_clear_phy_int(adapter);
+ atlx_clear_phy_int(adapter);
/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);
@@ -1787,8 +2366,9 @@ static irqreturn_t atl1_intr(int irq, void *data)
/* check if PCIE PHY Link down */
if (status & ISR_PHY_LINKDOWN) {
- dev_printk(KERN_DEBUG, &adapter->pdev->dev,
- "pcie phy link down %x\n", status);
+ if (netif_msg_intr(adapter))
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "pcie phy link down %x\n", status);
if (netif_running(adapter->netdev)) { /* reset MAC */
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
schedule_work(&adapter->pcie_dma_to_rst_task);
@@ -1798,9 +2378,10 @@ static irqreturn_t atl1_intr(int irq, void *data)
/* check if DMA read/write error ? */
if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
- dev_printk(KERN_DEBUG, &adapter->pdev->dev,
- "pcie DMA r/w error (status = 0x%x)\n",
- status);
+ if (netif_msg_intr(adapter))
+ dev_printk(KERN_DEBUG, &adapter->pdev->dev,
+ "pcie DMA r/w error (status = 0x%x)\n",
+ status);
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
schedule_work(&adapter->pcie_dma_to_rst_task);
return IRQ_HANDLED;
@@ -1823,8 +2404,11 @@ static irqreturn_t atl1_intr(int irq, void *data)
if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
ISR_HOST_RRD_OV))
- dev_printk(KERN_DEBUG, &adapter->pdev->dev,
- "rx exception, ISR = 0x%x\n", status);
+ if (netif_msg_intr(adapter))
+ dev_printk(KERN_DEBUG,
+ &adapter->pdev->dev,
+ "rx exception, ISR = 0x%x\n",
+ status);
atl1_intr_rx(adapter);
}
@@ -1856,119 +2440,51 @@ static void atl1_watchdog(unsigned long data)
*/
static void atl1_phy_config(unsigned long data)
{
- struct atl1_adapter *adapter = (struct atl1_adapter *)data;
- struct atl1_hw *hw = &adapter->hw;
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->lock, flags);
- adapter->phy_timer_pending = false;
- atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
- atl1_write_phy_reg(hw, MII_AT001_CR, hw->mii_1000t_ctrl_reg);
- atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
- spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
-/*
- * atl1_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- */
-static void atl1_tx_timeout(struct net_device *netdev)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
- /* Do the reset outside of interrupt context */
- schedule_work(&adapter->tx_timeout_task);
-}
-
-/*
- * Orphaned vendor comment left intact here:
- *
- * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
- * will assert. We do soft reset <0x1400=1> according
- * with the SPEC. BUT, it seemes that PCIE or DMA
- * state-machine will not be reset. DMAR_TO_INT will
- * assert again and again.
- *
- */
-static void atl1_tx_timeout_task(struct work_struct *work)
-{
- struct atl1_adapter *adapter =
- container_of(work, struct atl1_adapter, tx_timeout_task);
- struct net_device *netdev = adapter->netdev;
-
- netif_device_detach(netdev);
- atl1_down(adapter);
- atl1_up(adapter);
- netif_device_attach(netdev);
-}
-
-/*
- * atl1_link_chg_task - deal with link change event Out of interrupt context
- */
-static void atl1_link_chg_task(struct work_struct *work)
-{
- struct atl1_adapter *adapter =
- container_of(work, struct atl1_adapter, link_chg_task);
- unsigned long flags;
-
- spin_lock_irqsave(&adapter->lock, flags);
- atl1_check_link(adapter);
- spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
-static void atl1_vlan_rx_register(struct net_device *netdev,
- struct vlan_group *grp)
-{
- struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_adapter *adapter = (struct atl1_adapter *)data;
+ struct atl1_hw *hw = &adapter->hw;
unsigned long flags;
- u32 ctrl;
spin_lock_irqsave(&adapter->lock, flags);
- /* atl1_irq_disable(adapter); */
- adapter->vlgrp = grp;
-
- if (grp) {
- /* enable VLAN tag insert/strip */
- ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
- ctrl |= MAC_CTRL_RMV_VLAN;
- iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
- } else {
- /* disable VLAN tag insert/strip */
- ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
- ctrl &= ~MAC_CTRL_RMV_VLAN;
- iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
- }
-
- /* atl1_irq_enable(adapter); */
+ adapter->phy_timer_pending = false;
+ atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
+ atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
+ atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
spin_unlock_irqrestore(&adapter->lock, flags);
}
-static void atl1_restore_vlan(struct atl1_adapter *adapter)
-{
- atl1_vlan_rx_register(adapter->netdev, adapter->vlgrp);
-}
+/*
+ * Orphaned vendor comment left intact here:
+ *
+ * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
+ * will assert. We do soft reset <0x1400=1> according
+ * with the SPEC. BUT, it seemes that PCIE or DMA
+ * state-machine will not be reset. DMAR_TO_INT will
+ * assert again and again.
+ *
+ */
-int atl1_reset(struct atl1_adapter *adapter)
+static int atl1_reset(struct atl1_adapter *adapter)
{
int ret;
-
ret = atl1_reset_hw(&adapter->hw);
- if (ret != ATL1_SUCCESS)
+ if (ret)
return ret;
return atl1_init_hw(&adapter->hw);
}
-s32 atl1_up(struct atl1_adapter *adapter)
+static s32 atl1_up(struct atl1_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
int err;
int irq_flags = IRQF_SAMPLE_RANDOM;
/* hardware has been reset, we need to reload some things */
- atl1_set_multi(netdev);
+ atlx_set_multi(netdev);
atl1_init_ring_ptrs(adapter);
- atl1_restore_vlan(adapter);
+ atlx_restore_vlan(adapter);
err = atl1_alloc_rx_buffers(adapter);
- if (unlikely(!err)) /* no RX BUFFER allocated */
+ if (unlikely(!err))
+ /* no RX BUFFER allocated */
return -ENOMEM;
if (unlikely(atl1_configure(adapter))) {
@@ -1978,8 +2494,9 @@ s32 atl1_up(struct atl1_adapter *adapter)
err = pci_enable_msi(adapter->pdev);
if (err) {
- dev_info(&adapter->pdev->dev,
- "Unable to enable MSI: %d\n", err);
+ if (netif_msg_ifup(adapter))
+ dev_info(&adapter->pdev->dev,
+ "Unable to enable MSI: %d\n", err);
irq_flags |= IRQF_SHARED;
}
@@ -1989,7 +2506,7 @@ s32 atl1_up(struct atl1_adapter *adapter)
goto err_up;
mod_timer(&adapter->watchdog_timer, jiffies);
- atl1_irq_enable(adapter);
+ atlx_irq_enable(adapter);
atl1_check_link(adapter);
return 0;
@@ -2000,7 +2517,7 @@ err_up:
return err;
}
-void atl1_down(struct atl1_adapter *adapter)
+static void atl1_down(struct atl1_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
@@ -2008,7 +2525,7 @@ void atl1_down(struct atl1_adapter *adapter)
del_timer_sync(&adapter->phy_config_timer);
adapter->phy_timer_pending = false;
- atl1_irq_disable(adapter);
+ atlx_irq_disable(adapter);
free_irq(adapter->pdev->irq, netdev);
pci_disable_msi(adapter->pdev);
atl1_reset_hw(&adapter->hw);
@@ -2023,6 +2540,52 @@ void atl1_down(struct atl1_adapter *adapter)
atl1_clean_rx_ring(adapter);
}
+static void atl1_tx_timeout_task(struct work_struct *work)
+{
+ struct atl1_adapter *adapter =
+ container_of(work, struct atl1_adapter, tx_timeout_task);
+ struct net_device *netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+ atl1_down(adapter);
+ atl1_up(adapter);
+ netif_device_attach(netdev);
+}
+
+/*
+ * atl1_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ int old_mtu = netdev->mtu;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+ if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ if (netif_msg_link(adapter))
+ dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ adapter->hw.max_frame_size = max_frame;
+ adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
+ adapter->rx_buffer_len = (max_frame + 7) & ~7;
+ adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;
+
+ netdev->mtu = new_mtu;
+ if ((old_mtu != new_mtu) && netif_running(netdev)) {
+ atl1_down(adapter);
+ atl1_up(adapter);
+ }
+
+ return 0;
+}
+
/*
* atl1_open - Called when a network interface is made active
* @netdev: network interface device structure
@@ -2091,7 +2654,7 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
if (ctrl & BMSR_LSTATUS)
- wufc &= ~ATL1_WUFC_LNKC;
+ wufc &= ~ATLX_WUFC_LNKC;
/* reduce speed to 10/100M */
if (wufc) {
@@ -2099,15 +2662,15 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
/* if resume, let driver to re- setup link */
hw->phy_configured = false;
atl1_set_mac_addr(hw);
- atl1_set_multi(netdev);
+ atlx_set_multi(netdev);
ctrl = 0;
/* turn on magic packet wol */
- if (wufc & ATL1_WUFC_MAG)
+ if (wufc & ATLX_WUFC_MAG)
ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
/* turn on Link change WOL */
- if (wufc & ATL1_WUFC_LNKC)
+ if (wufc & ATLX_WUFC_LNKC)
ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
@@ -2115,13 +2678,13 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL);
ctrl &= ~MAC_CTRL_DBG;
ctrl &= ~MAC_CTRL_PROMIS_EN;
- if (wufc & ATL1_WUFC_MC)
+ if (wufc & ATLX_WUFC_MC)
ctrl |= MAC_CTRL_MC_ALL_EN;
else
ctrl &= ~MAC_CTRL_MC_ALL_EN;
/* turn on broadcast mode if wake on-BC is enabled */
- if (wufc & ATL1_WUFC_BC)
+ if (wufc & ATLX_WUFC_BC)
ctrl |= MAC_CTRL_BC_EN;
else
ctrl &= ~MAC_CTRL_BC_EN;
@@ -2149,12 +2712,13 @@ static int atl1_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1_adapter *adapter = netdev_priv(netdev);
- u32 ret_val;
+ u32 err;
- pci_set_power_state(pdev, 0);
+ pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- ret_val = pci_enable_device(pdev);
+ /* FIXME: check and handle */
+ err = pci_enable_device(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
@@ -2221,14 +2785,16 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_dma;
}
- /* Mark all PCI regions associated with PCI device
+ /*
+ * Mark all PCI regions associated with PCI device
* pdev as being reserved by owner atl1_driver_name
*/
- err = pci_request_regions(pdev, atl1_driver_name);
+ err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
if (err)
goto err_request_regions;
- /* Enables bus-mastering on the device and calls
+ /*
+ * Enables bus-mastering on the device and calls
* pcibios_set_master to do the needed arch specific settings
*/
pci_set_master(pdev);
@@ -2245,6 +2811,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->hw.back = adapter;
+ adapter->msg_enable = netif_msg_init(debug, atl1_default_msg);
adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
if (!adapter->hw.hw_addr) {
@@ -2254,7 +2821,8 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
/* get device revision number */
adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
(REG_MASTER_CTRL + 2));
- dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+ if (netif_msg_probe(adapter))
+ dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION);
/* set default ring resource counts */
adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
@@ -2269,17 +2837,17 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
netdev->open = &atl1_open;
netdev->stop = &atl1_close;
netdev->hard_start_xmit = &atl1_xmit_frame;
- netdev->get_stats = &atl1_get_stats;
- netdev->set_multicast_list = &atl1_set_multi;
+ netdev->get_stats = &atlx_get_stats;
+ netdev->set_multicast_list = &atlx_set_multi;
netdev->set_mac_address = &atl1_set_mac;
netdev->change_mtu = &atl1_change_mtu;
- netdev->do_ioctl = &atl1_ioctl;
- netdev->tx_timeout = &atl1_tx_timeout;
+ netdev->do_ioctl = &atlx_ioctl;
+ netdev->tx_timeout = &atlx_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = atl1_poll_controller;
#endif
- netdev->vlan_rx_register = atl1_vlan_rx_register;
+ netdev->vlan_rx_register = atlx_vlan_rx_register;
netdev->ethtool_ops = &atl1_ethtool_ops;
adapter->bd_number = cards_found;
@@ -2292,13 +2860,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
netdev->features = NETIF_F_HW_CSUM;
netdev->features |= NETIF_F_SG;
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
-
- /*
- * FIXME - Until tso performance gets fixed, disable the feature.
- * Enable it with ethtool -K if desired.
- */
- /* netdev->features |= NETIF_F_TSO; */
-
+ netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_LLTX;
/*
@@ -2309,7 +2871,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
/* atl1_pcie_patch(adapter); */
/* really reset GPHY core */
- iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
+ iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
/*
* reset the controller to
@@ -2354,7 +2916,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);
- INIT_WORK(&adapter->link_chg_task, atl1_link_chg_task);
+ INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);
@@ -2397,7 +2959,8 @@ static void __devexit atl1_remove(struct pci_dev *pdev)
adapter = netdev_priv(netdev);
- /* Some atl1 boards lack persistent storage for their MAC, and get it
+ /*
+ * Some atl1 boards lack persistent storage for their MAC, and get it
* from the BIOS during POST. If we've been messing with the MAC
* address, we need to save the permanent one.
*/
@@ -2407,7 +2970,7 @@ static void __devexit atl1_remove(struct pci_dev *pdev)
atl1_set_mac_addr(&adapter->hw);
}
- iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
+ iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
unregister_netdev(netdev);
pci_iounmap(pdev, adapter->hw.hw_addr);
pci_release_regions(pdev);
@@ -2416,7 +2979,7 @@ static void __devexit atl1_remove(struct pci_dev *pdev)
}
static struct pci_driver atl1_driver = {
- .name = atl1_driver_name,
+ .name = ATLX_DRIVER_NAME,
.id_table = atl1_pci_tbl,
.probe = atl1_probe,
.remove = __devexit_p(atl1_remove),
@@ -2448,3 +3011,554 @@ static int __init atl1_init_module(void)
module_init(atl1_init_module);
module_exit(atl1_exit_module);
+
+struct atl1_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define ATL1_STAT(m) \
+ sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)
+
+static struct atl1_stats atl1_gstrings_stats[] = {
+ {"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
+ {"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
+ {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
+ {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
+ {"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
+ {"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
+ {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)},
+ {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)},
+ {"multicast", ATL1_STAT(soft_stats.multicast)},
+ {"collisions", ATL1_STAT(soft_stats.collisions)},
+ {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
+ {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
+ {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
+ {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
+ {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
+ {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
+ {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
+ {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
+ {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
+ {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
+ {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
+ {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
+ {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
+ {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
+ {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
+ {"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
+ {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
+ {"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
+ {"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
+ {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
+ {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
+};
+
+static void atl1_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p;
+
+ for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
+ p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
+ data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+
+}
+
+static int atl1_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(atl1_gstrings_stats);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int atl1_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->advertising |=
+ (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full);
+ } else
+ ecmd->advertising |= (ADVERTISED_1000baseT_Full);
+ }
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = 0;
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (netif_carrier_ok(adapter->netdev)) {
+ u16 link_speed, link_duplex;
+ atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
+ ecmd->speed = link_speed;
+ if (link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL)
+ ecmd->autoneg = AUTONEG_ENABLE;
+ else
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int atl1_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+ u16 phy_data;
+ int ret_val = 0;
+ u16 old_media_type = hw->media_type;
+
+ if (netif_running(adapter->netdev)) {
+ if (netif_msg_link(adapter))
+ dev_dbg(&adapter->pdev->dev,
+ "ethtool shutting down adapter\n");
+ atl1_down(adapter);
+ }
+
+ if (ecmd->autoneg == AUTONEG_ENABLE)
+ hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
+ else {
+ if (ecmd->speed == SPEED_1000) {
+ if (ecmd->duplex != DUPLEX_FULL) {
+ if (netif_msg_link(adapter))
+ dev_warn(&adapter->pdev->dev,
+ "1000M half is invalid\n");
+ ret_val = -EINVAL;
+ goto exit_sset;
+ }
+ hw->media_type = MEDIA_TYPE_1000M_FULL;
+ } else if (ecmd->speed == SPEED_100) {
+ if (ecmd->duplex == DUPLEX_FULL)
+ hw->media_type = MEDIA_TYPE_100M_FULL;
+ else
+ hw->media_type = MEDIA_TYPE_100M_HALF;
+ } else {
+ if (ecmd->duplex == DUPLEX_FULL)
+ hw->media_type = MEDIA_TYPE_10M_FULL;
+ else
+ hw->media_type = MEDIA_TYPE_10M_HALF;
+ }
+ }
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ ecmd->advertising =
+ ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg | ADVERTISED_TP;
+ break;
+ case MEDIA_TYPE_1000M_FULL:
+ ecmd->advertising =
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg | ADVERTISED_TP;
+ break;
+ default:
+ ecmd->advertising = 0;
+ break;
+ }
+ if (atl1_phy_setup_autoneg_adv(hw)) {
+ ret_val = -EINVAL;
+ if (netif_msg_link(adapter))
+ dev_warn(&adapter->pdev->dev,
+ "invalid ethtool speed/duplex setting\n");
+ goto exit_sset;
+ }
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL)
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
+ MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default:
+ /* MEDIA_TYPE_10M_HALF: */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ }
+ }
+ atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+exit_sset:
+ if (ret_val)
+ hw->media_type = old_media_type;
+
+ if (netif_running(adapter->netdev)) {
+ if (netif_msg_link(adapter))
+ dev_dbg(&adapter->pdev->dev,
+ "ethtool starting adapter\n");
+ atl1_up(adapter);
+ } else if (!ret_val) {
+ if (netif_msg_link(adapter))
+ dev_dbg(&adapter->pdev->dev,
+ "ethtool resetting adapter\n");
+ atl1_reset(adapter);
+ }
+ return ret_val;
+}
+
+static void atl1_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
+ strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
+ sizeof(drvinfo->version));
+ strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->eedump_len = ATL1_EEDUMP_LEN;
+}
+
+static void atl1_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+ if (adapter->wol & ATLX_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & ATLX_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & ATLX_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & ATLX_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ return;
+}
+
+static int atl1_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+ adapter->wol = 0;
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= ATLX_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= ATLX_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= ATLX_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= ATLX_WUFC_MAG;
+ return 0;
+}
+
+static u32 atl1_get_msglevel(struct net_device *netdev)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void atl1_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = value;
+}
+
+static int atl1_get_regs_len(struct net_device *netdev)
+{
+ return ATL1_REG_COUNT * sizeof(u32);
+}
+
+static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+ unsigned int i;
+ u32 *regbuf = p;
+
+ for (i = 0; i < ATL1_REG_COUNT; i++) {
+ /*
+ * This switch statement avoids reserved regions
+ * of register space.
+ */
+ switch (i) {
+ case 6 ... 9:
+ case 14:
+ case 29 ... 31:
+ case 34 ... 63:
+ case 75 ... 127:
+ case 136 ... 1023:
+ case 1027 ... 1087:
+ case 1091 ... 1151:
+ case 1194 ... 1195:
+ case 1200 ... 1201:
+ case 1206 ... 1213:
+ case 1216 ... 1279:
+ case 1290 ... 1311:
+ case 1323 ... 1343:
+ case 1358 ... 1359:
+ case 1368 ... 1375:
+ case 1378 ... 1383:
+ case 1388 ... 1391:
+ case 1393 ... 1395:
+ case 1402 ... 1403:
+ case 1410 ... 1471:
+ case 1522 ... 1535:
+ /* reserved region; don't read it */
+ regbuf[i] = 0;
+ break;
+ default:
+ /* unreserved region */
+ regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
+ }
+ }
+}
+
+static void atl1_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
+ struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
+
+ ring->rx_max_pending = ATL1_MAX_RFD;
+ ring->tx_max_pending = ATL1_MAX_TPD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int atl1_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
+ struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
+ struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
+
+ struct atl1_tpd_ring tpd_old, tpd_new;
+ struct atl1_rfd_ring rfd_old, rfd_new;
+ struct atl1_rrd_ring rrd_old, rrd_new;
+ struct atl1_ring_header rhdr_old, rhdr_new;
+ int err;
+
+ tpd_old = adapter->tpd_ring;
+ rfd_old = adapter->rfd_ring;
+ rrd_old = adapter->rrd_ring;
+ rhdr_old = adapter->ring_header;
+
+ if (netif_running(adapter->netdev))
+ atl1_down(adapter);
+
+ rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
+ rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
+ rfdr->count;
+ rfdr->count = (rfdr->count + 3) & ~3;
+ rrdr->count = rfdr->count;
+
+ tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
+ tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
+ tpdr->count;
+ tpdr->count = (tpdr->count + 3) & ~3;
+
+ if (netif_running(adapter->netdev)) {
+ /* try to get new resources before deleting old */
+ err = atl1_setup_ring_resources(adapter);
+ if (err)
+ goto err_setup_ring;
+
+ /*
+ * save the new, restore the old in order to free it,
+ * then restore the new back again
+ */
+
+ rfd_new = adapter->rfd_ring;
+ rrd_new = adapter->rrd_ring;
+ tpd_new = adapter->tpd_ring;
+ rhdr_new = adapter->ring_header;
+ adapter->rfd_ring = rfd_old;
+ adapter->rrd_ring = rrd_old;
+ adapter->tpd_ring = tpd_old;
+ adapter->ring_header = rhdr_old;
+ atl1_free_ring_resources(adapter);
+ adapter->rfd_ring = rfd_new;
+ adapter->rrd_ring = rrd_new;
+ adapter->tpd_ring = tpd_new;
+ adapter->ring_header = rhdr_new;
+
+ err = atl1_up(adapter);
+ if (err)
+ return err;
+ }
+ return 0;
+
+err_setup_ring:
+ adapter->rfd_ring = rfd_old;
+ adapter->rrd_ring = rrd_old;
+ adapter->tpd_ring = tpd_old;
+ adapter->ring_header = rhdr_old;
+ atl1_up(adapter);
+ return err;
+}
+
+static void atl1_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *epause)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ epause->autoneg = AUTONEG_ENABLE;
+ } else {
+ epause->autoneg = AUTONEG_DISABLE;
+ }
+ epause->rx_pause = 1;
+ epause->tx_pause = 1;
+}
+
+static int atl1_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *epause)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ epause->autoneg = AUTONEG_ENABLE;
+ } else {
+ epause->autoneg = AUTONEG_DISABLE;
+ }
+
+ epause->rx_pause = 1;
+ epause->tx_pause = 1;
+
+ return 0;
+}
+
+/* FIXME: is this right? -- CHS */
+static u32 atl1_get_rx_csum(struct net_device *netdev)
+{
+ return 1;
+}
+
+static void atl1_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
+ memcpy(p, atl1_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static int atl1_nway_reset(struct net_device *netdev)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (netif_running(netdev)) {
+ u16 phy_data;
+ atl1_down(adapter);
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ } else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data = MII_CR_FULL_DUPLEX |
+ MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data = MII_CR_FULL_DUPLEX |
+ MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default:
+ /* MEDIA_TYPE_10M_HALF */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ }
+ }
+ atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+ atl1_up(adapter);
+ }
+ return 0;
+}
+
+const struct ethtool_ops atl1_ethtool_ops = {
+ .get_settings = atl1_get_settings,
+ .set_settings = atl1_set_settings,
+ .get_drvinfo = atl1_get_drvinfo,
+ .get_wol = atl1_get_wol,
+ .set_wol = atl1_set_wol,
+ .get_msglevel = atl1_get_msglevel,
+ .set_msglevel = atl1_set_msglevel,
+ .get_regs_len = atl1_get_regs_len,
+ .get_regs = atl1_get_regs,
+ .get_ringparam = atl1_get_ringparam,
+ .set_ringparam = atl1_set_ringparam,
+ .get_pauseparam = atl1_get_pauseparam,
+ .set_pauseparam = atl1_set_pauseparam,
+ .get_rx_csum = atl1_get_rx_csum,
+ .set_tx_csum = ethtool_op_set_tx_hw_csum,
+ .get_link = ethtool_op_get_link,
+ .set_sg = ethtool_op_set_sg,
+ .get_strings = atl1_get_strings,
+ .nway_reset = atl1_nway_reset,
+ .get_ethtool_stats = atl1_get_ethtool_stats,
+ .get_sset_count = atl1_get_sset_count,
+ .set_tso = ethtool_op_set_tso,
+};
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h
new file mode 100644
index 0000000000000000000000000000000000000000..51893d66eae1a5508bcbc4fce5ff2f775527d327
--- /dev/null
+++ b/drivers/net/atlx/atl1.h
@@ -0,0 +1,796 @@
+/*
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 - 2007 Chris Snook
+ * Copyright(c) 2006 Jay Cliburn
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef ATL1_H
+#define ATL1_H
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include "atlx.h"
+
+#define ATLX_DRIVER_NAME "atl1"
+
+MODULE_DESCRIPTION("Atheros L1 Gigabit Ethernet Driver");
+
+#define atlx_adapter atl1_adapter
+#define atlx_check_for_link atl1_check_for_link
+#define atlx_check_link atl1_check_link
+#define atlx_hash_mc_addr atl1_hash_mc_addr
+#define atlx_hash_set atl1_hash_set
+#define atlx_hw atl1_hw
+#define atlx_mii_ioctl atl1_mii_ioctl
+#define atlx_read_phy_reg atl1_read_phy_reg
+#define atlx_set_mac atl1_set_mac
+#define atlx_set_mac_addr atl1_set_mac_addr
+
+struct atl1_adapter;
+struct atl1_hw;
+
+/* function prototypes needed by multiple files */
+u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr);
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value);
+s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data);
+void atl1_set_mac_addr(struct atl1_hw *hw);
+static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static u32 atl1_check_link(struct atl1_adapter *adapter);
+
+extern const struct ethtool_ops atl1_ethtool_ops;
+
+/* hardware definitions specific to L1 */
+
+/* Block IDLE Status Register */
+#define IDLE_STATUS_RXMAC 0x1
+#define IDLE_STATUS_TXMAC 0x2
+#define IDLE_STATUS_RXQ 0x4
+#define IDLE_STATUS_TXQ 0x8
+#define IDLE_STATUS_DMAR 0x10
+#define IDLE_STATUS_DMAW 0x20
+#define IDLE_STATUS_SMB 0x40
+#define IDLE_STATUS_CMB 0x80
+
+/* MDIO Control Register */
+#define MDIO_WAIT_TIMES 30
+
+/* MAC Control Register */
+#define MAC_CTRL_TX_PAUSE 0x10000
+#define MAC_CTRL_SCNT 0x20000
+#define MAC_CTRL_SRST_TX 0x40000
+#define MAC_CTRL_TX_SIMURST 0x80000
+#define MAC_CTRL_SPEED_SHIFT 20
+#define MAC_CTRL_SPEED_MASK 0x300000
+#define MAC_CTRL_SPEED_1000 0x2
+#define MAC_CTRL_SPEED_10_100 0x1
+#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
+#define MAC_CTRL_TX_HUGE 0x800000
+#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
+#define MAC_CTRL_DBG 0x8000000
+
+/* Wake-On-Lan control register */
+#define WOL_CLK_SWITCH_EN 0x8000
+#define WOL_PT5_EN 0x200000
+#define WOL_PT6_EN 0x400000
+#define WOL_PT5_MATCH 0x8000000
+#define WOL_PT6_MATCH 0x10000000
+
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN 0x14A4
+#define WOL_PT_LEN_MASK 0x7F
+#define WOL_PT0_LEN_SHIFT 0
+#define WOL_PT1_LEN_SHIFT 8
+#define WOL_PT2_LEN_SHIFT 16
+#define WOL_PT3_LEN_SHIFT 24
+#define WOL_PT4_LEN_SHIFT 0
+#define WOL_PT5_LEN_SHIFT 8
+#define WOL_PT6_LEN_SHIFT 16
+
+/* Internal SRAM Partition Registers, low 32 bits */
+#define REG_SRAM_RFD_LEN 0x1504
+#define REG_SRAM_RRD_ADDR 0x1508
+#define REG_SRAM_RRD_LEN 0x150C
+#define REG_SRAM_TPD_ADDR 0x1510
+#define REG_SRAM_TPD_LEN 0x1514
+#define REG_SRAM_TRD_ADDR 0x1518
+#define REG_SRAM_TRD_LEN 0x151C
+#define REG_SRAM_RXF_ADDR 0x1520
+#define REG_SRAM_RXF_LEN 0x1524
+#define REG_SRAM_TXF_ADDR 0x1528
+#define REG_SRAM_TXF_LEN 0x152C
+#define REG_SRAM_TCPH_PATH_ADDR 0x1530
+#define SRAM_TCPH_ADDR_MASK 0xFFF
+#define SRAM_TCPH_ADDR_SHIFT 0
+#define SRAM_PATH_ADDR_MASK 0xFFF
+#define SRAM_PATH_ADDR_SHIFT 16
+
+/* Load Ptr Register */
+#define REG_LOAD_PTR 0x1534
+
+/* Descriptor Control registers, low 32 bits */
+#define REG_DESC_RFD_ADDR_LO 0x1544
+#define REG_DESC_RRD_ADDR_LO 0x1548
+#define REG_DESC_TPD_ADDR_LO 0x154C
+#define REG_DESC_CMB_ADDR_LO 0x1550
+#define REG_DESC_SMB_ADDR_LO 0x1554
+#define REG_DESC_RFD_RRD_RING_SIZE 0x1558
+#define DESC_RFD_RING_SIZE_MASK 0x7FF
+#define DESC_RFD_RING_SIZE_SHIFT 0
+#define DESC_RRD_RING_SIZE_MASK 0x7FF
+#define DESC_RRD_RING_SIZE_SHIFT 16
+#define REG_DESC_TPD_RING_SIZE 0x155C
+#define DESC_TPD_RING_SIZE_MASK 0x3FF
+#define DESC_TPD_RING_SIZE_SHIFT 0
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL 0x1580
+#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0
+#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1F
+#define TXQ_CTRL_EN 0x20
+#define TXQ_CTRL_ENH_MODE 0x40
+#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8
+#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3F
+#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16
+#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xFFFF
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584
+#define TX_JUMBO_TASK_TH_MASK 0x7FF
+#define TX_JUMBO_TASK_TH_SHIFT 0
+#define TX_TPD_MIN_IPG_MASK 0x1F
+#define TX_TPD_MIN_IPG_SHIFT 16
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL 0x15A0
+#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0
+#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xFF
+#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8
+#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xFF
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1F
+#define RXQ_CTRL_CUT_THRU_EN 0x40000000
+#define RXQ_CTRL_EN 0x80000000
+
+/* Rx jumbo packet threshold and rrd retirement timer */
+#define REG_RXQ_JMBOSZ_RRDTIM 0x15A4
+#define RXQ_JMBOSZ_TH_MASK 0x7FF
+#define RXQ_JMBOSZ_TH_SHIFT 0
+#define RXQ_JMBO_LKAH_MASK 0xF
+#define RXQ_JMBO_LKAH_SHIFT 11
+#define RXQ_RRD_TIMER_MASK 0xFFFF
+#define RXQ_RRD_TIMER_SHIFT 16
+
+/* RFD flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16
+#define RXQ_RXF_PAUSE_TH_HI_MASK 0xFFF
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0
+#define RXQ_RXF_PAUSE_TH_LO_MASK 0xFFF
+
+/* RRD flow control register */
+#define REG_RXQ_RRD_PAUSE_THRESH 0x15AC
+#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0
+#define RXQ_RRD_PAUSE_TH_HI_MASK 0xFFF
+#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16
+#define RXQ_RRD_PAUSE_TH_LO_MASK 0xFFF
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL 0x15C0
+#define DMA_CTRL_DMAR_IN_ORDER 0x1
+#define DMA_CTRL_DMAR_ENH_ORDER 0x2
+#define DMA_CTRL_DMAR_OUT_ORDER 0x4
+#define DMA_CTRL_RCB_VALUE 0x8
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
+#define DMA_CTRL_DMAR_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
+#define DMA_CTRL_DMAW_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAR_EN 0x400
+#define DMA_CTRL_DMAW_EN 0x800
+
+/* CMB/SMB Control Register */
+#define REG_CSMB_CTRL 0x15D0
+#define CSMB_CTRL_CMB_NOW 1
+#define CSMB_CTRL_SMB_NOW 2
+#define CSMB_CTRL_CMB_EN 4
+#define CSMB_CTRL_SMB_EN 8
+
+/* CMB DMA Write Threshold Register */
+#define REG_CMB_WRITE_TH 0x15D4
+#define CMB_RRD_TH_SHIFT 0
+#define CMB_RRD_TH_MASK 0x7FF
+#define CMB_TPD_TH_SHIFT 16
+#define CMB_TPD_TH_MASK 0x7FF
+
+/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */
+#define REG_CMB_WRITE_TIMER 0x15D8
+#define CMB_RX_TM_SHIFT 0
+#define CMB_RX_TM_MASK 0xFFFF
+#define CMB_TX_TM_SHIFT 16
+#define CMB_TX_TM_MASK 0xFFFF
+
+/* Number of packet received since last CMB write */
+#define REG_CMB_RX_PKT_CNT 0x15DC
+
+/* Number of packet transmitted since last CMB write */
+#define REG_CMB_TX_PKT_CNT 0x15E0
+
+/* SMB auto DMA timer register */
+#define REG_SMB_TIMER 0x15E4
+
+/* Mailbox Register */
+#define REG_MAILBOX 0x15F0
+#define MB_RFD_PROD_INDX_SHIFT 0
+#define MB_RFD_PROD_INDX_MASK 0x7FF
+#define MB_RRD_CONS_INDX_SHIFT 11
+#define MB_RRD_CONS_INDX_MASK 0x7FF
+#define MB_TPD_PROD_INDX_SHIFT 22
+#define MB_TPD_PROD_INDX_MASK 0x3FF
+
+/* Interrupt Status Register */
+#define ISR_SMB 0x1
+#define ISR_TIMER 0x2
+#define ISR_MANUAL 0x4
+#define ISR_RXF_OV 0x8
+#define ISR_RFD_UNRUN 0x10
+#define ISR_RRD_OV 0x20
+#define ISR_TXF_UNRUN 0x40
+#define ISR_LINK 0x80
+#define ISR_HOST_RFD_UNRUN 0x100
+#define ISR_HOST_RRD_OV 0x200
+#define ISR_DMAR_TO_RST 0x400
+#define ISR_DMAW_TO_RST 0x800
+#define ISR_GPHY 0x1000
+#define ISR_RX_PKT 0x10000
+#define ISR_TX_PKT 0x20000
+#define ISR_TX_DMA 0x40000
+#define ISR_RX_DMA 0x80000
+#define ISR_CMB_RX 0x100000
+#define ISR_CMB_TX 0x200000
+#define ISR_MAC_RX 0x400000
+#define ISR_MAC_TX 0x800000
+#define ISR_DIS_SMB 0x20000000
+#define ISR_DIS_DMA 0x40000000
+
+/* Normal Interrupt mask */
+#define IMR_NORMAL_MASK (\
+ ISR_SMB |\
+ ISR_GPHY |\
+ ISR_PHY_LINKDOWN|\
+ ISR_DMAR_TO_RST |\
+ ISR_DMAW_TO_RST |\
+ ISR_CMB_TX |\
+ ISR_CMB_RX)
+
+/* Debug Interrupt Mask (enable all interrupt) */
+#define IMR_DEBUG_MASK (\
+ ISR_SMB |\
+ ISR_TIMER |\
+ ISR_MANUAL |\
+ ISR_RXF_OV |\
+ ISR_RFD_UNRUN |\
+ ISR_RRD_OV |\
+ ISR_TXF_UNRUN |\
+ ISR_LINK |\
+ ISR_CMB_TX |\
+ ISR_CMB_RX |\
+ ISR_RX_PKT |\
+ ISR_TX_PKT |\
+ ISR_MAC_RX |\
+ ISR_MAC_TX)
+
+#define MEDIA_TYPE_1000M_FULL 1
+#define MEDIA_TYPE_100M_FULL 2
+#define MEDIA_TYPE_100M_HALF 3
+#define MEDIA_TYPE_10M_FULL 4
+#define MEDIA_TYPE_10M_HALF 5
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* All but 1000-Half */
+
+#define MAX_JUMBO_FRAME_SIZE 10240
+
+#define ATL1_EEDUMP_LEN 48
+
+/* Statistics counters collected by the MAC */
+struct stats_msg_block {
+ /* rx */
+ u32 rx_ok; /* good RX packets */
+ u32 rx_bcast; /* good RX broadcast packets */
+ u32 rx_mcast; /* good RX multicast packets */
+ u32 rx_pause; /* RX pause frames */
+ u32 rx_ctrl; /* RX control packets other than pause frames */
+ u32 rx_fcs_err; /* RX packets with bad FCS */
+ u32 rx_len_err; /* RX packets with length != actual size */
+ u32 rx_byte_cnt; /* good bytes received. FCS is NOT included */
+ u32 rx_runt; /* RX packets < 64 bytes with good FCS */
+ u32 rx_frag; /* RX packets < 64 bytes with bad FCS */
+ u32 rx_sz_64; /* 64 byte RX packets */
+ u32 rx_sz_65_127;
+ u32 rx_sz_128_255;
+ u32 rx_sz_256_511;
+ u32 rx_sz_512_1023;
+ u32 rx_sz_1024_1518;
+ u32 rx_sz_1519_max; /* 1519 byte to MTU RX packets */
+ u32 rx_sz_ov; /* truncated RX packets > MTU */
+ u32 rx_rxf_ov; /* frames dropped due to RX FIFO overflow */
+ u32 rx_rrd_ov; /* frames dropped due to RRD overflow */
+ u32 rx_align_err; /* alignment errors */
+ u32 rx_bcast_byte_cnt; /* RX broadcast bytes, excluding FCS */
+ u32 rx_mcast_byte_cnt; /* RX multicast bytes, excluding FCS */
+ u32 rx_err_addr; /* packets dropped due to address filtering */
+
+ /* tx */
+ u32 tx_ok; /* good TX packets */
+ u32 tx_bcast; /* good TX broadcast packets */
+ u32 tx_mcast; /* good TX multicast packets */
+ u32 tx_pause; /* TX pause frames */
+ u32 tx_exc_defer; /* TX packets deferred excessively */
+ u32 tx_ctrl; /* TX control frames, excluding pause frames */
+ u32 tx_defer; /* TX packets deferred */
+ u32 tx_byte_cnt; /* bytes transmitted, FCS is NOT included */
+ u32 tx_sz_64; /* 64 byte TX packets */
+ u32 tx_sz_65_127;
+ u32 tx_sz_128_255;
+ u32 tx_sz_256_511;
+ u32 tx_sz_512_1023;
+ u32 tx_sz_1024_1518;
+ u32 tx_sz_1519_max; /* 1519 byte to MTU TX packets */
+ u32 tx_1_col; /* packets TX after a single collision */
+ u32 tx_2_col; /* packets TX after multiple collisions */
+ u32 tx_late_col; /* TX packets with late collisions */
+ u32 tx_abort_col; /* TX packets aborted w/excessive collisions */
+ u32 tx_underrun; /* TX packets aborted due to TX FIFO underrun
+ * or TRD FIFO underrun */
+ u32 tx_rd_eop; /* reads beyond the EOP into the next frame
+ * when TRD was not written timely */
+ u32 tx_len_err; /* TX packets where length != actual size */
+ u32 tx_trunc; /* TX packets truncated due to size > MTU */
+ u32 tx_bcast_byte; /* broadcast bytes transmitted, excluding FCS */
+ u32 tx_mcast_byte; /* multicast bytes transmitted, excluding FCS */
+ u32 smb_updated; /* 1: SMB Updated. This is used by software to
+ * indicate the statistics update. Software
+ * should clear this bit after retrieving the
+ * statistics information. */
+};
+
+/* Coalescing Message Block */
+struct coals_msg_block {
+ u32 int_stats; /* interrupt status */
+ u16 rrd_prod_idx; /* TRD Producer Index. */
+ u16 rfd_cons_idx; /* RFD Consumer Index. */
+ u16 update; /* Selene sets this bit every time it DMAs the
+ * CMB to host memory. Software should clear
+ * this bit when CMB info is processed. */
+ u16 tpd_cons_idx; /* TPD Consumer Index. */
+};
+
+/* RRD descriptor */
+struct rx_return_desc {
+ u8 num_buf; /* Number of RFD buffers used by the received packet */
+ u8 resved;
+ u16 buf_indx; /* RFD Index of the first buffer */
+ union {
+ u32 valid;
+ struct {
+ u16 rx_chksum;
+ u16 pkt_size;
+ } xsum_sz;
+ } xsz;
+
+ u16 pkt_flg; /* Packet flags */
+ u16 err_flg; /* Error flags */
+ u16 resved2;
+ u16 vlan_tag; /* VLAN TAG */
+};
+
+#define PACKET_FLAG_ETH_TYPE 0x0080
+#define PACKET_FLAG_VLAN_INS 0x0100
+#define PACKET_FLAG_ERR 0x0200
+#define PACKET_FLAG_IPV4 0x0400
+#define PACKET_FLAG_UDP 0x0800
+#define PACKET_FLAG_TCP 0x1000
+#define PACKET_FLAG_BCAST 0x2000
+#define PACKET_FLAG_MCAST 0x4000
+#define PACKET_FLAG_PAUSE 0x8000
+
+#define ERR_FLAG_CRC 0x0001
+#define ERR_FLAG_CODE 0x0002
+#define ERR_FLAG_DRIBBLE 0x0004
+#define ERR_FLAG_RUNT 0x0008
+#define ERR_FLAG_OV 0x0010
+#define ERR_FLAG_TRUNC 0x0020
+#define ERR_FLAG_IP_CHKSUM 0x0040
+#define ERR_FLAG_L4_CHKSUM 0x0080
+#define ERR_FLAG_LEN 0x0100
+#define ERR_FLAG_DES_ADDR 0x0200
+
+/* RFD descriptor */
+struct rx_free_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 buf_len; /* Size of the receive buffer in host memory */
+ u16 coalese; /* Update consumer index to host after the
+ * reception of this frame */
+ /* __attribute__ ((packed)) is required */
+} __attribute__ ((packed));
+
+/*
+ * The L1 transmit packet descriptor is comprised of four 32-bit words.
+ *
+ * 31 0
+ * +---------------------------------------+
+ * | Word 0: Buffer addr lo |
+ * +---------------------------------------+
+ * | Word 1: Buffer addr hi |
+ * +---------------------------------------+
+ * | Word 2 |
+ * +---------------------------------------+
+ * | Word 3 |
+ * +---------------------------------------+
+ *
+ * Words 0 and 1 combine to form a 64-bit buffer address.
+ *
+ * Word 2 is self explanatory in the #define block below.
+ *
+ * Word 3 has two forms, depending upon the state of bits 3 and 4.
+ * If bits 3 and 4 are both zero, then bits 14:31 are unused by the
+ * hardware. Otherwise, if either bit 3 or 4 is set, the definition
+ * of bits 14:31 vary according to the following depiction.
+ *
+ * 0 End of packet 0 End of packet
+ * 1 Coalesce 1 Coalesce
+ * 2 Insert VLAN tag 2 Insert VLAN tag
+ * 3 Custom csum enable = 0 3 Custom csum enable = 1
+ * 4 Segment enable = 1 4 Segment enable = 0
+ * 5 Generate IP checksum 5 Generate IP checksum
+ * 6 Generate TCP checksum 6 Generate TCP checksum
+ * 7 Generate UDP checksum 7 Generate UDP checksum
+ * 8 VLAN tagged 8 VLAN tagged
+ * 9 Ethernet frame type 9 Ethernet frame type
+ * 10-+ 10-+
+ * 11 | IP hdr length (10:13) 11 | IP hdr length (10:13)
+ * 12 | (num 32-bit words) 12 | (num 32-bit words)
+ * 13-+ 13-+
+ * 14-+ 14 Unused
+ * 15 | TCP hdr length (14:17) 15 Unused
+ * 16 | (num 32-bit words) 16-+
+ * 17-+ 17 |
+ * 18 Header TPD flag 18 |
+ * 19-+ 19 | Payload offset
+ * 20 | 20 | (16:23)
+ * 21 | 21 |
+ * 22 | 22 |
+ * 23 | 23-+
+ * 24 | 24-+
+ * 25 | MSS (19:31) 25 |
+ * 26 | 26 |
+ * 27 | 27 | Custom csum offset
+ * 28 | 28 | (24:31)
+ * 29 | 29 |
+ * 30 | 30 |
+ * 31-+ 31-+
+ */
+
+/* tpd word 2 */
+#define TPD_BUFLEN_MASK 0x3FFF
+#define TPD_BUFLEN_SHIFT 0
+#define TPD_DMAINT_MASK 0x0001
+#define TPD_DMAINT_SHIFT 14
+#define TPD_PKTNT_MASK 0x0001
+#define TPD_PKTINT_SHIFT 15
+#define TPD_VLANTAG_MASK 0xFFFF
+#define TPD_VLAN_SHIFT 16
+
+/* tpd word 3 bits 0:13 */
+#define TPD_EOP_MASK 0x0001
+#define TPD_EOP_SHIFT 0
+#define TPD_COALESCE_MASK 0x0001
+#define TPD_COALESCE_SHIFT 1
+#define TPD_INS_VL_TAG_MASK 0x0001
+#define TPD_INS_VL_TAG_SHIFT 2
+#define TPD_CUST_CSUM_EN_MASK 0x0001
+#define TPD_CUST_CSUM_EN_SHIFT 3
+#define TPD_SEGMENT_EN_MASK 0x0001
+#define TPD_SEGMENT_EN_SHIFT 4
+#define TPD_IP_CSUM_MASK 0x0001
+#define TPD_IP_CSUM_SHIFT 5
+#define TPD_TCP_CSUM_MASK 0x0001
+#define TPD_TCP_CSUM_SHIFT 6
+#define TPD_UDP_CSUM_MASK 0x0001
+#define TPD_UDP_CSUM_SHIFT 7
+#define TPD_VL_TAGGED_MASK 0x0001
+#define TPD_VL_TAGGED_SHIFT 8
+#define TPD_ETHTYPE_MASK 0x0001
+#define TPD_ETHTYPE_SHIFT 9
+#define TPD_IPHL_MASK 0x000F
+#define TPD_IPHL_SHIFT 10
+
+/* tpd word 3 bits 14:31 if segment enabled */
+#define TPD_TCPHDRLEN_MASK 0x000F
+#define TPD_TCPHDRLEN_SHIFT 14
+#define TPD_HDRFLAG_MASK 0x0001
+#define TPD_HDRFLAG_SHIFT 18
+#define TPD_MSS_MASK 0x1FFF
+#define TPD_MSS_SHIFT 19
+
+/* tpd word 3 bits 16:31 if custom csum enabled */
+#define TPD_PLOADOFFSET_MASK 0x00FF
+#define TPD_PLOADOFFSET_SHIFT 16
+#define TPD_CCSUMOFFSET_MASK 0x00FF
+#define TPD_CCSUMOFFSET_SHIFT 24
+
+struct tx_packet_desc {
+ __le64 buffer_addr;
+ __le32 word2;
+ __le32 word3;
+};
+
+/* DMA Order Settings */
+enum atl1_dma_order {
+ atl1_dma_ord_in = 1,
+ atl1_dma_ord_enh = 2,
+ atl1_dma_ord_out = 4
+};
+
+enum atl1_dma_rcb {
+ atl1_rcb_64 = 0,
+ atl1_rcb_128 = 1
+};
+
+enum atl1_dma_req_block {
+ atl1_dma_req_128 = 0,
+ atl1_dma_req_256 = 1,
+ atl1_dma_req_512 = 2,
+ atl1_dma_req_1024 = 3,
+ atl1_dma_req_2048 = 4,
+ atl1_dma_req_4096 = 5
+};
+
+#define ATL1_MAX_INTR 3
+#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */
+
+#define ATL1_DEFAULT_TPD 256
+#define ATL1_MAX_TPD 1024
+#define ATL1_MIN_TPD 64
+#define ATL1_DEFAULT_RFD 512
+#define ATL1_MIN_RFD 128
+#define ATL1_MAX_RFD 2048
+#define ATL1_REG_COUNT 1538
+
+#define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i]))
+#define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc)
+#define ATL1_TPD_DESC(R, i) ATL1_GET_DESC(R, i, struct tx_packet_desc)
+#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc)
+
+/*
+ * atl1_ring_header represents a single, contiguous block of DMA space
+ * mapped for the three descriptor rings (tpd, rfd, rrd) and the two
+ * message blocks (cmb, smb) described below
+ */
+struct atl1_ring_header {
+ void *desc; /* virtual address */
+ dma_addr_t dma; /* physical address*/
+ unsigned int size; /* length in bytes */
+};
+
+/*
+ * atl1_buffer is wrapper around a pointer to a socket buffer
+ * so a DMA handle can be stored along with the skb
+ */
+struct atl1_buffer {
+ struct sk_buff *skb; /* socket buffer */
+ u16 length; /* rx buffer length */
+ u16 alloced; /* 1 if skb allocated */
+ dma_addr_t dma;
+};
+
+/* transmit packet descriptor (tpd) ring */
+struct atl1_tpd_ring {
+ void *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ u16 hw_idx; /* hardware index */
+ atomic_t next_to_clean;
+ atomic_t next_to_use;
+ struct atl1_buffer *buffer_info;
+};
+
+/* receive free descriptor (rfd) ring */
+struct atl1_rfd_ring {
+ void *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ atomic_t next_to_use;
+ u16 next_to_clean;
+ struct atl1_buffer *buffer_info;
+};
+
+/* receive return descriptor (rrd) ring */
+struct atl1_rrd_ring {
+ void *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ unsigned int size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ u16 next_to_use;
+ atomic_t next_to_clean;
+};
+
+/* coalescing message block (cmb) */
+struct atl1_cmb {
+ struct coals_msg_block *cmb;
+ dma_addr_t dma;
+};
+
+/* statistics message block (smb) */
+struct atl1_smb {
+ struct stats_msg_block *smb;
+ dma_addr_t dma;
+};
+
+/* Statistics counters */
+struct atl1_sft_stats {
+ u64 rx_packets;
+ u64 tx_packets;
+ u64 rx_bytes;
+ u64 tx_bytes;
+ u64 multicast;
+ u64 collisions;
+ u64 rx_errors;
+ u64 rx_length_errors;
+ u64 rx_crc_errors;
+ u64 rx_frame_errors;
+ u64 rx_fifo_errors;
+ u64 rx_missed_errors;
+ u64 tx_errors;
+ u64 tx_fifo_errors;
+ u64 tx_aborted_errors;
+ u64 tx_window_errors;
+ u64 tx_carrier_errors;
+ u64 tx_pause; /* TX pause frames */
+ u64 excecol; /* TX packets w/ excessive collisions */
+ u64 deffer; /* TX packets deferred */
+ u64 scc; /* packets TX after a single collision */
+ u64 mcc; /* packets TX after multiple collisions */
+ u64 latecol; /* TX packets w/ late collisions */
+ u64 tx_underun; /* TX packets aborted due to TX FIFO underrun
+ * or TRD FIFO underrun */
+ u64 tx_trunc; /* TX packets truncated due to size > MTU */
+ u64 rx_pause; /* num Pause packets received. */
+ u64 rx_rrd_ov;
+ u64 rx_trunc;
+};
+
+/* hardware structure */
+struct atl1_hw {
+ u8 __iomem *hw_addr;
+ struct atl1_adapter *back;
+ enum atl1_dma_order dma_ord;
+ enum atl1_dma_rcb rcb_value;
+ enum atl1_dma_req_block dmar_block;
+ enum atl1_dma_req_block dmaw_block;
+ u8 preamble_len;
+ u8 max_retry;
+ u8 jam_ipg; /* IPG to start JAM for collision based flow
+ * control in half-duplex mode. In units of
+ * 8-bit time */
+ u8 ipgt; /* Desired back to back inter-packet gap.
+ * The default is 96-bit time */
+ u8 min_ifg; /* Minimum number of IFG to enforce in between
+ * receive frames. Frame gap below such IFP
+ * is dropped */
+ u8 ipgr1; /* 64bit Carrier-Sense window */
+ u8 ipgr2; /* 96-bit IPG window */
+ u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned
+ * burst. Each TPD is 16 bytes long */
+ u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned
+ * burst. Each RFD is 12 bytes long */
+ u8 rfd_fetch_gap;
+ u8 rrd_burst; /* Threshold number of RRDs that can be retired
+ * in a burst. Each RRD is 16 bytes long */
+ u8 tpd_fetch_th;
+ u8 tpd_fetch_gap;
+ u16 tx_jumbo_task_th;
+ u16 txf_burst; /* Number of data bytes to read in a cache-
+ * aligned burst. Each SRAM entry is 8 bytes */
+ u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN
+ * packets should add 4 bytes */
+ u16 rx_jumbo_lkah;
+ u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after
+ * every 512ns passes. */
+ u16 lcol; /* Collision Window */
+
+ u16 cmb_tpd;
+ u16 cmb_rrd;
+ u16 cmb_rx_timer;
+ u16 cmb_tx_timer;
+ u32 smb_timer;
+ u16 media_type;
+ u16 autoneg_advertised;
+
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ u16 dev_rev;
+
+ /* spi flash */
+ u8 flash_vendor;
+
+ u8 mac_addr[ETH_ALEN];
+ u8 perm_mac_addr[ETH_ALEN];
+
+ bool phy_configured;
+};
+
+struct atl1_adapter {
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+ struct atl1_sft_stats soft_stats;
+ struct vlan_group *vlgrp;
+ u32 rx_buffer_len;
+ u32 wol;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t lock;
+ struct work_struct tx_timeout_task;
+ struct work_struct link_chg_task;
+ struct work_struct pcie_dma_to_rst_task;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_config_timer;
+ bool phy_timer_pending;
+
+ /* all descriptor rings' memory */
+ struct atl1_ring_header ring_header;
+
+ /* TX */
+ struct atl1_tpd_ring tpd_ring;
+ spinlock_t mb_lock;
+
+ /* RX */
+ struct atl1_rfd_ring rfd_ring;
+ struct atl1_rrd_ring rrd_ring;
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u32 msg_enable;
+ u16 imt; /* interrupt moderator timer (2us resolution) */
+ u16 ict; /* interrupt clear timer (2us resolution */
+ struct mii_if_info mii; /* MII interface info */
+
+ u32 bd_number; /* board number */
+ bool pci_using_64;
+ struct atl1_hw hw;
+ struct atl1_smb smb;
+ struct atl1_cmb cmb;
+};
+
+#endif /* ATL1_H */
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
new file mode 100644
index 0000000000000000000000000000000000000000..4186326d1b9426d5c4f00c5324daf2919ceffeed
--- /dev/null
+++ b/drivers/net/atlx/atlx.c
@@ -0,0 +1,433 @@
+/* atlx.c -- common functions for Attansic network drivers
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 - 2007 Chris Snook
+ * Copyright(c) 2006 Jay Cliburn
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Including this file like a header is a temporary hack, I promise. -- CHS */
+#ifndef ATLX_C
+#define ATLX_C
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include "atlx.h"
+
+static struct atlx_spi_flash_dev flash_table[] = {
+/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SEC_ERS CHIP_ERS */
+ {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
+ {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
+ {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
+};
+
+static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return atlx_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/*
+ * atlx_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atlx_set_mac(struct net_device *netdev, void *p)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+ atlx_set_mac_addr(&adapter->hw);
+ return 0;
+}
+
+static void atlx_check_for_link(struct atlx_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ u16 phy_data = 0;
+
+ spin_lock(&adapter->lock);
+ adapter->phy_timer_pending = false;
+ atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ spin_unlock(&adapter->lock);
+
+ /* notify upper layer link down ASAP */
+ if (!(phy_data & BMSR_LSTATUS)) {
+ /* Link Down */
+ if (netif_carrier_ok(netdev)) {
+ /* old link state: Up */
+ dev_info(&adapter->pdev->dev, "%s link is down\n",
+ netdev->name);
+ adapter->link_speed = SPEED_0;
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ }
+ }
+ schedule_work(&adapter->link_chg_task);
+}
+
+/*
+ * atlx_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ */
+static void atlx_set_multi(struct net_device *netdev)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ struct atlx_hw *hw = &adapter->hw;
+ struct dev_mc_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = ioread32(hw->hw_addr + REG_MAC_CTRL);
+ if (netdev->flags & IFF_PROMISC)
+ rctl |= MAC_CTRL_PROMIS_EN;
+ else if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= MAC_CTRL_MC_ALL_EN;
+ rctl &= ~MAC_CTRL_PROMIS_EN;
+ } else
+ rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+
+ iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL);
+
+ /* clear the old settings from the multicast hash table */
+ iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
+ iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
+
+ /* compute mc addresses' hash value ,and put it into hash table */
+ for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+ hash_value = atlx_hash_mc_addr(hw, mc_ptr->dmi_addr);
+ atlx_hash_set(hw, hash_value);
+ }
+}
+
+/*
+ * atlx_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ */
+static void atlx_irq_enable(struct atlx_adapter *adapter)
+{
+ iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
+ ioread32(adapter->hw.hw_addr + REG_IMR);
+}
+
+/*
+ * atlx_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ */
+static void atlx_irq_disable(struct atlx_adapter *adapter)
+{
+ iowrite32(0, adapter->hw.hw_addr + REG_IMR);
+ ioread32(adapter->hw.hw_addr + REG_IMR);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+static void atlx_clear_phy_int(struct atlx_adapter *adapter)
+{
+ u16 phy_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->lock, flags);
+ atlx_read_phy_reg(&adapter->hw, 19, &phy_data);
+ spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+/*
+ * atlx_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ */
+static struct net_device_stats *atlx_get_stats(struct net_device *netdev)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ return &adapter->net_stats;
+}
+
+/*
+ * atlx_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ */
+static void atlx_tx_timeout(struct net_device *netdev)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->tx_timeout_task);
+}
+
+/*
+ * atlx_link_chg_task - deal with link change event Out of interrupt context
+ */
+static void atlx_link_chg_task(struct work_struct *work)
+{
+ struct atlx_adapter *adapter;
+ unsigned long flags;
+
+ adapter = container_of(work, struct atlx_adapter, link_chg_task);
+
+ spin_lock_irqsave(&adapter->lock, flags);
+ atlx_check_link(adapter);
+ spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+static void atlx_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct atlx_adapter *adapter = netdev_priv(netdev);
+ unsigned long flags;
+ u32 ctrl;
+
+ spin_lock_irqsave(&adapter->lock, flags);
+ /* atlx_irq_disable(adapter); FIXME: confirm/remove */
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
+ ctrl |= MAC_CTRL_RMV_VLAN;
+ iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL);
+ ctrl &= ~MAC_CTRL_RMV_VLAN;
+ iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL);
+ }
+
+ /* atlx_irq_enable(adapter); FIXME */
+ spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+static void atlx_restore_vlan(struct atlx_adapter *adapter)
+{
+ atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+}
+
+/*
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define ATL1_MAX_NIC 4
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
+
+/*
+ * Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 100 (200us)
+ */
+static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_int_mod_timer;
+module_param_array_named(int_mod_timer, int_mod_timer, int,
+ &num_int_mod_timer, 0);
+MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
+
+/*
+ * flash_vendor
+ *
+ * Valid Range: 0-2
+ *
+ * 0 - Atmel
+ * 1 - SST
+ * 2 - ST
+ *
+ * Default Value: 0
+ */
+static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_flash_vendor;
+module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
+MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
+
+#define DEFAULT_INT_MOD_CNT 100 /* 200us */
+#define MAX_INT_MOD_CNT 65000
+#define MIN_INT_MOD_CNT 50
+
+#define FLASH_VENDOR_DEFAULT 0
+#define FLASH_VENDOR_MIN 0
+#define FLASH_VENDOR_MAX 2
+
+struct atl1_option {
+ enum { enable_option, range_option, list_option } type;
+ char *name;
+ char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ struct atl1_opt_list {
+ int i;
+ char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
+ struct pci_dev *pdev)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ dev_info(&pdev->dev, "%s enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ dev_info(&pdev->dev, "%s disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ dev_info(&pdev->dev, "%s set to %i\n", opt->name,
+ *value);
+ return 0;
+ }
+ break;
+ case list_option:{
+ int i;
+ struct atl1_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ dev_info(&pdev->dev, "%s\n",
+ ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/*
+ * atl1_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1_check_options(struct atl1_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int bd = adapter->bd_number;
+ if (bd >= ATL1_MAX_NIC) {
+ dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
+ dev_notice(&pdev->dev, "using defaults for all values\n");
+ }
+ { /* Interrupt Moderate Timer */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "Interrupt Moderator Timer",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_INT_MOD_CNT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r = {.min = MIN_INT_MOD_CNT,
+ .max = MAX_INT_MOD_CNT} }
+ };
+ int val;
+ if (num_int_mod_timer > bd) {
+ val = int_mod_timer[bd];
+ atl1_validate_option(&val, &opt, pdev);
+ adapter->imt = (u16) val;
+ } else
+ adapter->imt = (u16) (opt.def);
+ }
+
+ { /* Flash Vendor */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "SPI Flash Vendor",
+ .err = "using default of "
+ __MODULE_STRING(FLASH_VENDOR_DEFAULT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r = {.min = FLASH_VENDOR_MIN,
+ .max = FLASH_VENDOR_MAX} }
+ };
+ int val;
+ if (num_flash_vendor > bd) {
+ val = flash_vendor[bd];
+ atl1_validate_option(&val, &opt, pdev);
+ adapter->hw.flash_vendor = (u8) val;
+ } else
+ adapter->hw.flash_vendor = (u8) (opt.def);
+ }
+}
+
+#endif /* ATLX_C */
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h
new file mode 100644
index 0000000000000000000000000000000000000000..3be7c09734d48bda7ab0906e0562e085f108ea94
--- /dev/null
+++ b/drivers/net/atlx/atlx.h
@@ -0,0 +1,506 @@
+/* atlx_hw.h -- common hardware definitions for Attansic network drivers
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 - 2007 Chris Snook
+ * Copyright(c) 2006 Jay Cliburn
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef ATLX_H
+#define ATLX_H
+
+#include
+#include
+
+#define ATLX_DRIVER_VERSION "2.1.1"
+MODULE_AUTHOR("Xiong Huang , \
+ Chris Snook , Jay Cliburn ");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATLX_DRIVER_VERSION);
+
+#define ATLX_ERR_PHY 2
+#define ATLX_ERR_PHY_SPEED 7
+#define ATLX_ERR_PHY_RES 8
+
+#define SPEED_0 0xffff
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#define MEDIA_TYPE_AUTO_SENSOR 0
+
+/* register definitions */
+#define REG_PM_CTRLSTAT 0x44
+
+#define REG_PCIE_CAP_LIST 0x58
+
+#define REG_VPD_CAP 0x6C
+#define VPD_CAP_ID_MASK 0xFF
+#define VPD_CAP_ID_SHIFT 0
+#define VPD_CAP_NEXT_PTR_MASK 0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT 8
+#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT 16
+#define VPD_CAP_VPD_FLAG 0x80000000
+
+#define REG_VPD_DATA 0x70
+
+#define REG_SPI_FLASH_CTRL 0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
+#define SPI_FLASH_CTRL_STS_WEN 0x2
+#define SPI_FLASH_CTRL_STS_WPEN 0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
+#define SPI_FLASH_CTRL_INS_MASK 0x7
+#define SPI_FLASH_CTRL_INS_SHIFT 8
+#define SPI_FLASH_CTRL_START 0x800
+#define SPI_FLASH_CTRL_EN_VPD 0x2000
+#define SPI_FLASH_CTRL_LDSTART 0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
+#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
+#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
+#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
+
+#define REG_SPI_ADDR 0x204
+
+#define REG_SPI_DATA 0x208
+
+#define REG_SPI_FLASH_CONFIG 0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
+#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
+
+#define REG_SPI_FLASH_OP_PROGRAM 0x210
+#define REG_SPI_FLASH_OP_SC_ERASE 0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
+#define REG_SPI_FLASH_OP_RDID 0x213
+#define REG_SPI_FLASH_OP_WREN 0x214
+#define REG_SPI_FLASH_OP_RDSR 0x215
+#define REG_SPI_FLASH_OP_WRSR 0x216
+#define REG_SPI_FLASH_OP_READ 0x217
+
+#define REG_TWSI_CTRL 0x218
+#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT 0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
+#define TWSI_CTRL_SW_LDSTART 0x800
+#define TWSI_CTRL_HW_LDSTART 0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
+#define TWSI_CTRL_LD_EXIST 0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
+#define TWSI_CTRL_FREQ_SEL_100K 0
+#define TWSI_CTRL_FREQ_SEL_200K 1
+#define TWSI_CTRL_FREQ_SEL_300K 2
+#define TWSI_CTRL_FREQ_SEL_400K 3
+#define TWSI_CTRL_SMB_SLV_ADDR /* FIXME: define or remove */
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
+
+#define REG_PCIE_DEV_MISC_CTRL 0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
+
+#define REG_PCIE_PHYMISC 0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
+
+#define REG_PCIE_DLL_TX_CTRL1 0x1104
+#define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK 0x400
+#define PCIE_DLL_TX_CTRL1_DEF 0x568
+
+#define REG_LTSSM_TEST_MODE 0x12FC
+#define LTSSM_TEST_MODE_DEF 0x6500
+
+/* Master Control Register */
+#define REG_MASTER_CTRL 0x1400
+#define MASTER_CTRL_SOFT_RST 0x1
+#define MASTER_CTRL_MTIMER_EN 0x2
+#define MASTER_CTRL_ITIMER_EN 0x4
+#define MASTER_CTRL_MANUAL_INT 0x8
+#define MASTER_CTRL_REV_NUM_SHIFT 16
+#define MASTER_CTRL_REV_NUM_MASK 0xFF
+#define MASTER_CTRL_DEV_ID_SHIFT 24
+#define MASTER_CTRL_DEV_ID_MASK 0xFF
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT 0x1404
+
+/* IRQ Moderator Timer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT 0x1408
+
+#define REG_PHY_ENABLE 0x140C
+
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER 0x140E
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS 0x1410
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL 0x1414
+#define MDIO_DATA_MASK 0xFFFF
+#define MDIO_DATA_SHIFT 0
+#define MDIO_REG_ADDR_MASK 0x1F
+#define MDIO_REG_ADDR_SHIFT 16
+#define MDIO_RW 0x200000
+#define MDIO_SUP_PREAMBLE 0x400000
+#define MDIO_START 0x800000
+#define MDIO_CLK_SEL_SHIFT 24
+#define MDIO_CLK_25_4 0
+#define MDIO_CLK_25_6 2
+#define MDIO_CLK_25_8 3
+#define MDIO_CLK_25_10 4
+#define MDIO_CLK_25_14 5
+#define MDIO_CLK_25_20 6
+#define MDIO_CLK_25_28 7
+#define MDIO_BUSY 0x8000000
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS 0x1418
+
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL 0x141C
+#define BIST0_NOW 0x1
+#define BIST0_SRAM_FAIL 0x2
+#define BIST0_FUSE_FLAG 0x4
+#define REG_BIST1_CTRL 0x1420
+#define BIST1_NOW 0x1
+#define BIST1_SRAM_FAIL 0x2
+#define BIST1_FUSE_FLAG 0x4
+
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK 0x1424
+#define SERDES_LOCK_DETECT 1
+#define SERDES_LOCK_DETECT_EN 2
+
+/* MAC Control Register */
+#define REG_MAC_CTRL 0x1480
+#define MAC_CTRL_TX_EN 1
+#define MAC_CTRL_RX_EN 2
+#define MAC_CTRL_TX_FLOW 4
+#define MAC_CTRL_RX_FLOW 8
+#define MAC_CTRL_LOOPBACK 0x10
+#define MAC_CTRL_DUPLX 0x20
+#define MAC_CTRL_ADD_CRC 0x40
+#define MAC_CTRL_PAD 0x80
+#define MAC_CTRL_LENCHK 0x100
+#define MAC_CTRL_HUGE_EN 0x200
+#define MAC_CTRL_PRMLEN_SHIFT 10
+#define MAC_CTRL_PRMLEN_MASK 0xF
+#define MAC_CTRL_RMV_VLAN 0x4000
+#define MAC_CTRL_PROMIS_EN 0x8000
+#define MAC_CTRL_MC_ALL_EN 0x2000000
+#define MAC_CTRL_BC_EN 0x4000000
+
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG 0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT 0
+#define MAC_IPG_IFG_IPGT_MASK 0x7F
+#define MAC_IPG_IFG_MIFG_SHIFT 8
+#define MAC_IPG_IFG_MIFG_MASK 0xFF
+#define MAC_IPG_IFG_IPGR1_SHIFT 16
+#define MAC_IPG_IFG_IPGR1_MASK 0x7F
+#define MAC_IPG_IFG_IPGR2_SHIFT 24
+#define MAC_IPG_IFG_IPGR2_MASK 0x7F
+
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR 0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE 0x1490
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3FF
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xF
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
+#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xF
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xF
+
+/* Maximum Frame Length Control Register */
+#define REG_MTU 0x149C
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL 0x14A0
+#define WOL_PATTERN_EN 0x1
+#define WOL_PATTERN_PME_EN 0x2
+#define WOL_MAGIC_EN 0x4
+#define WOL_MAGIC_PME_EN 0x8
+#define WOL_LINK_CHG_EN 0x10
+#define WOL_LINK_CHG_PME_EN 0x20
+#define WOL_PATTERN_ST 0x100
+#define WOL_MAGIC_ST 0x200
+#define WOL_LINKCHG_ST 0x400
+#define WOL_PT0_EN 0x10000
+#define WOL_PT1_EN 0x20000
+#define WOL_PT2_EN 0x40000
+#define WOL_PT3_EN 0x80000
+#define WOL_PT4_EN 0x100000
+#define WOL_PT0_MATCH 0x1000000
+#define WOL_PT1_MATCH 0x2000000
+#define WOL_PT2_MATCH 0x4000000
+#define WOL_PT3_MATCH 0x8000000
+#define WOL_PT4_MATCH 0x10000000
+
+/* Internal SRAM Partition Register, high 32 bits */
+#define REG_SRAM_RFD_ADDR 0x1500
+
+/* Descriptor Control register, high 32 bits */
+#define REG_DESC_BASE_ADDR_HI 0x1540
+
+/* Interrupt Status Register */
+#define REG_ISR 0x1600
+#define ISR_UR_DETECTED 0x1000000
+#define ISR_FERR_DETECTED 0x2000000
+#define ISR_NFERR_DETECTED 0x4000000
+#define ISR_CERR_DETECTED 0x8000000
+#define ISR_PHY_LINKDOWN 0x10000000
+#define ISR_DIS_INT 0x80000000
+
+/* Interrupt Mask Register */
+#define REG_IMR 0x1604
+
+#define REG_RFD_RRD_IDX 0x1800
+#define REG_TPD_IDX 0x1804
+
+/* MII definitions */
+
+/* PHY Common Register */
+#define MII_ATLX_CR 0x09
+#define MII_ATLX_SR 0x0A
+#define MII_ATLX_ESR 0x0F
+#define MII_ATLX_PSCR 0x10
+#define MII_ATLX_PSSR 0x11
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100,
+ * 00=10
+ */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100,
+ * 00=10
+ */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK 0x2040
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Ext register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext stat info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Link partner ability register */
+#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
+#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
+#define MII_LPA_PAUSE 0x0400 /* PAUSE */
+#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
+#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
+#define MII_LPA_NPAGE 0x8000 /* Next page bit */
+
+/* Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD 0x0001 /* IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
+#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Dir bit */
+#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability support */
+#define MII_AR_SPEED_MASK 0x01E0
+#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_ATLX_CR_1000T_HD_CAPS 0x0100 /* Adv 1000T HD cap */
+#define MII_ATLX_CR_1000T_FD_CAPS 0x0200 /* Adv 1000T FD cap */
+#define MII_ATLX_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device,
+ * 0=DTE device */
+#define MII_ATLX_CR_1000T_MS_VALUE 0x0800 /* 1=Config PHY as Master,
+ * 0=Configure PHY as Slave */
+#define MII_ATLX_CR_1000T_MS_ENABLE 0x1000 /* 1=Man Master/Slave config,
+ * 0=Auto Master/Slave config
+ */
+#define MII_ATLX_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define MII_ATLX_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define MII_ATLX_CR_1000T_TEST_MODE_2 0x4000 /* Master Xmit Jitter test */
+#define MII_ATLX_CR_1000T_TEST_MODE_3 0x6000 /* Slave Xmit Jitter test */
+#define MII_ATLX_CR_1000T_TEST_MODE_4 0x8000 /* Xmitter Distortion test */
+#define MII_ATLX_CR_1000T_SPEED_MASK 0x0300
+#define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK 0x0300
+
+/* 1000BASE-T Status Register */
+#define MII_ATLX_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define MII_ATLX_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define MII_ATLX_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master
+ * 0=Slave
+ */
+#define MII_ATLX_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config
+ * fault */
+#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+
+/* Extended Status Register */
+#define MII_ATLX_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define MII_ATLX_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define MII_ATLX_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define MII_ATLX_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+/* ATLX PHY Specific Control Register */
+#define MII_ATLX_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Func disabled */
+#define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enbld */
+#define MII_ATLX_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define MII_ATLX_PSCR_MAC_POWERDOWN 0x0008
+#define MII_ATLX_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low
+ * 0=CLK125 toggling
+ */
+#define MII_ATLX_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5,
+ * Manual MDI configuration
+ */
+#define MII_ATLX_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define MII_ATLX_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover
+ * 100BASE-TX/10BASE-T: MDI
+ * Mode */
+#define MII_ATLX_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended
+ * 10BASE-T distance
+ * (Lower 10BASE-T RX
+ * Threshold)
+ * 0=Normal 10BASE-T RX
+ * Threshold
+ */
+#define MII_ATLX_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in
+ * 100BASE-TX
+ * 0=MII interface in
+ * 100BASE-TX
+ */
+#define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler dsbl */
+#define MII_ATLX_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define MII_ATLX_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+#define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT 5
+#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* ATLX PHY Specific Status Register */
+#define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define MII_ATLX_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define MII_ATLX_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define MII_ATLX_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+/* PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
+#define CMD_IO_SPACE 0x0001
+#define CMD_MEMORY_SPACE 0x0002
+#define CMD_BUS_MASTER 0x0004
+
+/* Wake Up Filter Control */
+#define ATLX_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define ATLX_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define ATLX_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define ATLX_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
+#define ATLX_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
+
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */
+#define EEPROM_SUM 0xBABA
+#define NODE_ADDRESS_SIZE 6
+
+struct atlx_spi_flash_dev {
+ const char *manu_name; /* manufacturer id */
+ /* op-code */
+ u8 cmd_wrsr;
+ u8 cmd_read;
+ u8 cmd_program;
+ u8 cmd_wren;
+ u8 cmd_wrdi;
+ u8 cmd_rdsr;
+ u8 cmd_rdid;
+ u8 cmd_sector_erase;
+ u8 cmd_chip_erase;
+};
+
+#endif /* ATLX_H */
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 62f09e59d9c47cbcd29e84c55af5185fb4c7ee23..3d4433358a36ed50b846d2156494c58b6fa61374 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -378,8 +378,8 @@ static void __init get_node_ID(struct net_device *dev)
sa_offset = 15;
for (i = 0; i < 3; i++)
- ((u16 *)dev->dev_addr)[i] =
- be16_to_cpu(eeprom_op(ioaddr, EE_READ(sa_offset + i)));
+ ((__be16 *)dev->dev_addr)[i] =
+ cpu_to_be16(eeprom_op(ioaddr, EE_READ(sa_offset + i)));
write_reg(ioaddr, CMR2, CMR2_NULL);
}
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 504b7ce2747de0c6cf91f6ab945608dd11dcfd76..3634b5fd791964d88bf42bd3785402b79e0fc44a 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -701,7 +701,7 @@ static struct net_device * au1000_probe(int port_num)
aup->mii_bus.write = mdiobus_write;
aup->mii_bus.reset = mdiobus_reset;
aup->mii_bus.name = "au1000_eth_mii";
- aup->mii_bus.id = aup->mac_id;
+ snprintf(aup->mii_bus.id, MII_BUS_ID_SIZE, "%x", aup->mac_id);
aup->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
for(i = 0; i < PHY_MAX_ADDR; ++i)
aup->mii_bus.irq[i] = PHY_POLL;
@@ -709,11 +709,11 @@ static struct net_device * au1000_probe(int port_num)
/* if known, set corresponding PHY IRQs */
#if defined(AU1XXX_PHY_STATIC_CONFIG)
# if defined(AU1XXX_PHY0_IRQ)
- if (AU1XXX_PHY0_BUSID == aup->mii_bus.id)
+ if (AU1XXX_PHY0_BUSID == aup->mac_id)
aup->mii_bus.irq[AU1XXX_PHY0_ADDR] = AU1XXX_PHY0_IRQ;
# endif
# if defined(AU1XXX_PHY1_IRQ)
- if (AU1XXX_PHY1_BUSID == aup->mii_bus.id)
+ if (AU1XXX_PHY1_BUSID == aup->mac_id)
aup->mii_bus.irq[AU1XXX_PHY1_ADDR] = AU1XXX_PHY1_IRQ;
# endif
#endif
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 26b2dd5016cd4ecfcd9a94915dfa9cb4744f91f0..717dcc1aa1e97acb8bfddf2e44e97cc51cb8a8f7 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -969,7 +969,7 @@ static int __init bf537mac_probe(struct net_device *dev)
lp->mii_bus.write = mdiobus_write;
lp->mii_bus.reset = mdiobus_reset;
lp->mii_bus.name = "bfin_mac_mdio";
- lp->mii_bus.id = 0;
+ snprintf(lp->mii_bus.id, MII_BUS_ID_SIZE, "0");
lp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
for (i = 0; i < PHY_MAX_ADDR; ++i)
lp->mii_bus.irq[i] = PHY_POLL;
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index d16e0e1d2b30fba04d5f6f2d8ae81599480599d7..ebb539e090c35685e8a02215e1dc9e3dcd4fb32d 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2429,7 +2429,7 @@ int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct pac
struct slave *slave = NULL;
int ret = NET_RX_DROP;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
goto out;
if (!(dev->flags & IFF_MASTER))
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 3f58c3d0b7106ae02452ff77f1e41c28ae2ded67..5a673725471cd55430be7642ceb71d4ff88d2b6e 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -345,7 +345,7 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct
struct arp_pkt *arp = (struct arp_pkt *)skb->data;
int res = NET_RX_DROP;
- if (bond_dev->nd_net != &init_net)
+ if (dev_net(bond_dev) != &init_net)
goto out;
if (!(bond_dev->flags & IFF_MASTER))
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 0f0675319e9c601ff76880f001b4e07d5ad829ee..6e91b4b7aabb3402629571288f43754a3b67f104 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2629,7 +2629,7 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
unsigned char *arp_ptr;
__be32 sip, tip;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
goto out;
if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
@@ -2646,10 +2646,7 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
if (!slave || !slave_do_arp_validate(bond, slave))
goto out_unlock;
- /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
- if (!pskb_may_pull(skb, (sizeof(struct arphdr) +
- (2 * dev->addr_len) +
- (2 * sizeof(u32)))))
+ if (!pskb_may_pull(skb, arp_hdr_len(dev)))
goto out_unlock;
arp = arp_hdr(skb);
@@ -3068,8 +3065,6 @@ out:
#ifdef CONFIG_PROC_FS
-#define SEQ_START_TOKEN ((void *)1)
-
static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
{
struct bonding *bond = seq->private;
@@ -3473,7 +3468,7 @@ static int bond_netdev_event(struct notifier_block *this, unsigned long event, v
{
struct net_device *event_dev = (struct net_device *)ptr;
- if (event_dev->nd_net != &init_net)
+ if (dev_net(event_dev) != &init_net)
return NOTIFY_DONE;
dprintk("event_dev: %s, event: %lx\n",
@@ -3511,6 +3506,9 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event,
struct bonding *bond, *bond_next;
struct vlan_entry *vlan, *vlan_next;
+ if (dev_net(ifa->ifa_dev->dev) != &init_net)
+ return NOTIFY_DONE;
+
list_for_each_entry_safe(bond, bond_next, &bond_dev_list, bond_list) {
if (bond->dev == event_dev) {
switch (event) {
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 14299f8063af16341011a49e7156f2b60688465f..93e13636f8dda2fef5667cc544b99fb068f2ca17 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -532,8 +532,7 @@ static void cas_spare_free(struct cas *cp)
/* free spare buffers */
INIT_LIST_HEAD(&list);
spin_lock(&cp->rx_spare_lock);
- list_splice(&cp->rx_spare_list, &list);
- INIT_LIST_HEAD(&cp->rx_spare_list);
+ list_splice_init(&cp->rx_spare_list, &list);
spin_unlock(&cp->rx_spare_lock);
list_for_each_safe(elem, tmp, &list) {
cas_page_free(cp, list_entry(elem, cas_page_t, list));
@@ -546,13 +545,11 @@ static void cas_spare_free(struct cas *cp)
* lock than used everywhere else to manipulate this list.
*/
spin_lock(&cp->rx_inuse_lock);
- list_splice(&cp->rx_inuse_list, &list);
- INIT_LIST_HEAD(&cp->rx_inuse_list);
+ list_splice_init(&cp->rx_inuse_list, &list);
spin_unlock(&cp->rx_inuse_lock);
#else
spin_lock(&cp->rx_spare_lock);
- list_splice(&cp->rx_inuse_list, &list);
- INIT_LIST_HEAD(&cp->rx_inuse_list);
+ list_splice_init(&cp->rx_inuse_list, &list);
spin_unlock(&cp->rx_spare_lock);
#endif
list_for_each_safe(elem, tmp, &list) {
@@ -573,8 +570,7 @@ static void cas_spare_recover(struct cas *cp, const gfp_t flags)
/* make a local copy of the list */
INIT_LIST_HEAD(&list);
spin_lock(&cp->rx_inuse_lock);
- list_splice(&cp->rx_inuse_list, &list);
- INIT_LIST_HEAD(&cp->rx_inuse_list);
+ list_splice_init(&cp->rx_inuse_list, &list);
spin_unlock(&cp->rx_inuse_lock);
list_for_each_safe(elem, tmp, &list) {
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index c85194f2cd2dc2b8a9bf5628e63b9189db0ec2cd..9da7ff437031fec11854152851c344608ec183ff 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -987,7 +987,7 @@ static int external_switch;
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id, i;
- int mdio_bus_id = cpmac_mii.id;
+ char *mdio_bus_id = "0";
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
@@ -1008,8 +1008,6 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
if (external_switch || dumb_switch) {
struct fixed_phy_status status = {};
- mdio_bus_id = 0;
-
/*
* FIXME: this should be in the platform code!
* Since there is not platform code at all (that is,
@@ -1143,6 +1141,7 @@ int __devinit cpmac_init(void)
}
cpmac_mii.phy_mask = ~(mask | 0x80000000);
+ snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "0");
res = mdiobus_register(&cpmac_mii);
if (res)
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index fd2e05bbb9036fd8eac062caa7338651e0cf8baa..05e5f59e87fa56f2e71f359f0a312ba446bdae5b 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1014,8 +1014,8 @@ static int offload_open(struct net_device *dev)
adapter->port[0]->mtu : 0xffff);
init_smt(adapter);
- /* Never mind if the next step fails */
- sysfs_create_group(&tdev->lldev->dev.kobj, &offload_attr_group);
+ if (sysfs_create_group(&tdev->lldev->dev.kobj, &offload_attr_group))
+ dev_dbg(&dev->dev, "cannot create sysfs group\n");
/* Call back all registered clients */
cxgb3_add_clients(tdev);
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index 901c824bfe6d5bda0f8a9d85a97b00bc91c1bf50..ff9c013ce5357114f6aff22456cb45e3e020659b 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -833,10 +833,26 @@ static int do_trace(struct t3cdev *dev, struct sk_buff *skb)
return 0;
}
+/*
+ * That skb would better have come from process_responses() where we abuse
+ * ->priority and ->csum to carry our data. NB: if we get to per-arch
+ * ->csum, the things might get really interesting here.
+ */
+
+static inline u32 get_hwtid(struct sk_buff *skb)
+{
+ return ntohl((__force __be32)skb->priority) >> 8 & 0xfffff;
+}
+
+static inline u32 get_opcode(struct sk_buff *skb)
+{
+ return G_OPCODE(ntohl((__force __be32)skb->csum));
+}
+
static int do_term(struct t3cdev *dev, struct sk_buff *skb)
{
- unsigned int hwtid = ntohl(skb->priority) >> 8 & 0xfffff;
- unsigned int opcode = G_OPCODE(ntohl(skb->csum));
+ unsigned int hwtid = get_hwtid(skb);
+ unsigned int opcode = get_opcode(skb);
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
@@ -914,7 +930,7 @@ int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n)
{
while (n--) {
struct sk_buff *skb = *skbs++;
- unsigned int opcode = G_OPCODE(ntohl(skb->csum));
+ unsigned int opcode = get_opcode(skb);
int ret = cpl_handlers[opcode] (dev, skb);
#if VALIDATE_TID
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c
index 865faee53e1720e42241aad509bbc1956e323205..f510140885ae407bdaf0878aafe375c7538d2b49 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/cxgb3/l2t.c
@@ -407,7 +407,7 @@ found:
} else if (neigh->nud_state & (NUD_CONNECTED|NUD_STALE))
setup_l2e_send_pending(dev, NULL, e);
} else {
- e->state = neigh_is_connected(neigh) ?
+ e->state = neigh->nud_state & NUD_CONNECTED ?
L2T_STATE_VALID : L2T_STATE_STALE;
if (memcmp(e->dmac, neigh->ha, 6))
setup_l2e_send_pending(dev, NULL, e);
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index ddc30c4bf34a75f87e69ac7f2fce8015a684f808..c062aacf229ce2b23e773e45584734184d6e3ffa 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -971,7 +971,8 @@ static int __devinit dfx_driver_init(struct net_device *dev,
int alloc_size; /* total buffer size needed */
char *top_v, *curr_v; /* virtual addrs into memory block */
dma_addr_t top_p, curr_p; /* physical addrs into memory block */
- u32 data, le32; /* host data register value */
+ u32 data; /* host data register value */
+ __le32 le32;
char *board_name = NULL;
DBG_printk("In dfx_driver_init...\n");
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3b840283a9c31c41c98e6564577d6fce3d204082..31feae1ea390368be941fc8f7250b277051558ce 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -161,13 +161,13 @@ struct e1000_buffer {
struct sk_buff *skb;
dma_addr_t dma;
unsigned long time_stamp;
- uint16_t length;
- uint16_t next_to_watch;
+ u16 length;
+ u16 next_to_watch;
};
struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; };
-struct e1000_ps_page_dma { uint64_t ps_page_dma[PS_PAGE_BUFFERS]; };
+struct e1000_ps_page_dma { u64 ps_page_dma[PS_PAGE_BUFFERS]; };
struct e1000_tx_ring {
/* pointer to the descriptor ring memory */
@@ -186,9 +186,9 @@ struct e1000_tx_ring {
struct e1000_buffer *buffer_info;
spinlock_t tx_lock;
- uint16_t tdh;
- uint16_t tdt;
- boolean_t last_tx_tso;
+ u16 tdh;
+ u16 tdt;
+ bool last_tx_tso;
};
struct e1000_rx_ring {
@@ -213,8 +213,8 @@ struct e1000_rx_ring {
/* cpu for rx queue */
int cpu;
- uint16_t rdh;
- uint16_t rdt;
+ u16 rdh;
+ u16 rdt;
};
#define E1000_DESC_UNUSED(R) \
@@ -237,31 +237,30 @@ struct e1000_adapter {
struct timer_list watchdog_timer;
struct timer_list phy_info_timer;
struct vlan_group *vlgrp;
- uint16_t mng_vlan_id;
- uint32_t bd_number;
- uint32_t rx_buffer_len;
- uint32_t wol;
- uint32_t smartspeed;
- uint32_t en_mng_pt;
- uint16_t link_speed;
- uint16_t link_duplex;
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 smartspeed;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
spinlock_t stats_lock;
#ifdef CONFIG_E1000_NAPI
spinlock_t tx_queue_lock;
#endif
- atomic_t irq_sem;
unsigned int total_tx_bytes;
unsigned int total_tx_packets;
unsigned int total_rx_bytes;
unsigned int total_rx_packets;
/* Interrupt Throttle Rate */
- uint32_t itr;
- uint32_t itr_setting;
- uint16_t tx_itr;
- uint16_t rx_itr;
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
struct work_struct reset_task;
- uint8_t fc_autoneg;
+ u8 fc_autoneg;
struct timer_list blink_timer;
unsigned long led_status;
@@ -270,30 +269,30 @@ struct e1000_adapter {
struct e1000_tx_ring *tx_ring; /* One per active queue */
unsigned int restart_queue;
unsigned long tx_queue_len;
- uint32_t txd_cmd;
- uint32_t tx_int_delay;
- uint32_t tx_abs_int_delay;
- uint32_t gotcl;
- uint64_t gotcl_old;
- uint64_t tpt_old;
- uint64_t colc_old;
- uint32_t tx_timeout_count;
- uint32_t tx_fifo_head;
- uint32_t tx_head_addr;
- uint32_t tx_fifo_size;
- uint8_t tx_timeout_factor;
+ u32 txd_cmd;
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+ u32 gotcl;
+ u64 gotcl_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u8 tx_timeout_factor;
atomic_t tx_fifo_stall;
- boolean_t pcix_82544;
- boolean_t detect_tx_hung;
+ bool pcix_82544;
+ bool detect_tx_hung;
/* RX */
#ifdef CONFIG_E1000_NAPI
- boolean_t (*clean_rx) (struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
+ bool (*clean_rx) (struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
#else
- boolean_t (*clean_rx) (struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
+ bool (*clean_rx) (struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
#endif
void (*alloc_rx_buf) (struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
@@ -306,17 +305,17 @@ struct e1000_adapter {
int num_tx_queues;
int num_rx_queues;
- uint64_t hw_csum_err;
- uint64_t hw_csum_good;
- uint64_t rx_hdr_split;
- uint32_t alloc_rx_buff_failed;
- uint32_t rx_int_delay;
- uint32_t rx_abs_int_delay;
- boolean_t rx_csum;
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+ bool rx_csum;
unsigned int rx_ps_pages;
- uint32_t gorcl;
- uint64_t gorcl_old;
- uint16_t rx_ps_bsize0;
+ u32 gorcl;
+ u64 gorcl_old;
+ u16 rx_ps_bsize0;
/* OS defined structs */
@@ -330,19 +329,19 @@ struct e1000_adapter {
struct e1000_phy_info phy_info;
struct e1000_phy_stats phy_stats;
- uint32_t test_icr;
+ u32 test_icr;
struct e1000_tx_ring test_tx_ring;
struct e1000_rx_ring test_rx_ring;
int msg_enable;
- boolean_t have_msi;
+ bool have_msi;
/* to not mess up cache alignment, always add to the bottom */
- boolean_t tso_force;
- boolean_t smart_power_down; /* phy smart power down */
- boolean_t quad_port_a;
+ bool tso_force;
+ bool smart_power_down; /* phy smart power down */
+ bool quad_port_a;
unsigned long flags;
- uint32_t eeprom_wol;
+ u32 eeprom_wol;
};
enum e1000_state_t {
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 85e66f4c788690872a766e10973a24d659b4ce28..701531e72e7b3b4d1ddab378e5b05795c320d052 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -36,7 +36,7 @@ extern int e1000_up(struct e1000_adapter *adapter);
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reinit_locked(struct e1000_adapter *adapter);
extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
@@ -289,7 +289,7 @@ e1000_set_pauseparam(struct net_device *netdev,
return retval;
}
-static uint32_t
+static u32
e1000_get_rx_csum(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -297,7 +297,7 @@ e1000_get_rx_csum(struct net_device *netdev)
}
static int
-e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
+e1000_set_rx_csum(struct net_device *netdev, u32 data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
adapter->rx_csum = data;
@@ -309,14 +309,14 @@ e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
return 0;
}
-static uint32_t
+static u32
e1000_get_tx_csum(struct net_device *netdev)
{
return (netdev->features & NETIF_F_HW_CSUM) != 0;
}
static int
-e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
+e1000_set_tx_csum(struct net_device *netdev, u32 data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -335,7 +335,7 @@ e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
}
static int
-e1000_set_tso(struct net_device *netdev, uint32_t data)
+e1000_set_tso(struct net_device *netdev, u32 data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
if ((adapter->hw.mac_type < e1000_82544) ||
@@ -353,11 +353,11 @@ e1000_set_tso(struct net_device *netdev, uint32_t data)
netdev->features &= ~NETIF_F_TSO6;
DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
- adapter->tso_force = TRUE;
+ adapter->tso_force = true;
return 0;
}
-static uint32_t
+static u32
e1000_get_msglevel(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -365,7 +365,7 @@ e1000_get_msglevel(struct net_device *netdev)
}
static void
-e1000_set_msglevel(struct net_device *netdev, uint32_t data)
+e1000_set_msglevel(struct net_device *netdev, u32 data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
adapter->msg_enable = data;
@@ -375,7 +375,7 @@ static int
e1000_get_regs_len(struct net_device *netdev)
{
#define E1000_REGS_LEN 32
- return E1000_REGS_LEN * sizeof(uint32_t);
+ return E1000_REGS_LEN * sizeof(u32);
}
static void
@@ -384,10 +384,10 @@ e1000_get_regs(struct net_device *netdev,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- uint32_t *regs_buff = p;
- uint16_t phy_data;
+ u32 *regs_buff = p;
+ u16 phy_data;
- memset(p, 0, E1000_REGS_LEN * sizeof(uint32_t));
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
@@ -412,44 +412,44 @@ e1000_get_regs(struct net_device *netdev,
IGP01E1000_PHY_AGC_A);
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[13] = (uint32_t)phy_data; /* cable length */
+ regs_buff[13] = (u32)phy_data; /* cable length */
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
IGP01E1000_PHY_AGC_B);
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[14] = (uint32_t)phy_data; /* cable length */
+ regs_buff[14] = (u32)phy_data; /* cable length */
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
IGP01E1000_PHY_AGC_C);
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[15] = (uint32_t)phy_data; /* cable length */
+ regs_buff[15] = (u32)phy_data; /* cable length */
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
IGP01E1000_PHY_AGC_D);
e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[16] = (uint32_t)phy_data; /* cable length */
+ regs_buff[16] = (u32)phy_data; /* cable length */
regs_buff[17] = 0; /* extended 10bt distance (not needed) */
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[18] = (uint32_t)phy_data; /* cable polarity */
+ regs_buff[18] = (u32)phy_data; /* cable polarity */
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
IGP01E1000_PHY_PCS_INIT_REG);
e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[19] = (uint32_t)phy_data; /* cable polarity */
+ regs_buff[19] = (u32)phy_data; /* cable polarity */
regs_buff[20] = 0; /* polarity correction enabled (always) */
regs_buff[22] = 0; /* phy receive errors (unavailable) */
regs_buff[23] = regs_buff[18]; /* mdix mode */
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
} else {
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- regs_buff[13] = (uint32_t)phy_data; /* cable length */
+ regs_buff[13] = (u32)phy_data; /* cable length */
regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- regs_buff[17] = (uint32_t)phy_data; /* extended 10bt distance */
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
regs_buff[18] = regs_buff[13]; /* cable polarity */
regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
regs_buff[20] = regs_buff[17]; /* polarity correction */
@@ -459,7 +459,7 @@ e1000_get_regs(struct net_device *netdev,
}
regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
- regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
if (hw->mac_type >= e1000_82540 &&
hw->mac_type < e1000_82571 &&
@@ -477,14 +477,14 @@ e1000_get_eeprom_len(struct net_device *netdev)
static int
e1000_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, uint8_t *bytes)
+ struct ethtool_eeprom *eeprom, u8 *bytes)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- uint16_t *eeprom_buff;
+ u16 *eeprom_buff;
int first_word, last_word;
int ret_val = 0;
- uint16_t i;
+ u16 i;
if (eeprom->len == 0)
return -EINVAL;
@@ -494,7 +494,7 @@ e1000_get_eeprom(struct net_device *netdev,
first_word = eeprom->offset >> 1;
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(sizeof(uint16_t) *
+ eeprom_buff = kmalloc(sizeof(u16) *
(last_word - first_word + 1), GFP_KERNEL);
if (!eeprom_buff)
return -ENOMEM;
@@ -514,7 +514,7 @@ e1000_get_eeprom(struct net_device *netdev,
for (i = 0; i < last_word - first_word + 1; i++)
le16_to_cpus(&eeprom_buff[i]);
- memcpy(bytes, (uint8_t *)eeprom_buff + (eeprom->offset & 1),
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
eeprom->len);
kfree(eeprom_buff);
@@ -523,14 +523,14 @@ e1000_get_eeprom(struct net_device *netdev,
static int
e1000_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, uint8_t *bytes)
+ struct ethtool_eeprom *eeprom, u8 *bytes)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- uint16_t *eeprom_buff;
+ u16 *eeprom_buff;
void *ptr;
int max_len, first_word, last_word, ret_val = 0;
- uint16_t i;
+ u16 i;
if (eeprom->len == 0)
return -EOPNOTSUPP;
@@ -590,7 +590,7 @@ e1000_get_drvinfo(struct net_device *netdev,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
char firmware_version[32];
- uint16_t eeprom_data;
+ u16 eeprom_data;
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
@@ -674,13 +674,13 @@ e1000_set_ringparam(struct net_device *netdev,
adapter->tx_ring = txdr;
adapter->rx_ring = rxdr;
- rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD);
- rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ?
+ rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
E1000_MAX_RXD : E1000_MAX_82544_RXD));
rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
- txdr->count = max(ring->tx_pending,(uint32_t)E1000_MIN_TXD);
- txdr->count = min(txdr->count,(uint32_t)(mac_type < e1000_82544 ?
+ txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
+ txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
E1000_MAX_TXD : E1000_MAX_82544_TXD));
txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
@@ -728,13 +728,13 @@ err_setup:
return err;
}
-static bool reg_pattern_test(struct e1000_adapter *adapter, uint64_t *data,
- int reg, uint32_t mask, uint32_t write)
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
{
- static const uint32_t test[] =
+ static const u32 test[] =
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
- uint8_t __iomem *address = adapter->hw.hw_addr + reg;
- uint32_t read;
+ u8 __iomem *address = adapter->hw.hw_addr + reg;
+ u32 read;
int i;
for (i = 0; i < ARRAY_SIZE(test); i++) {
@@ -751,11 +751,11 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, uint64_t *data,
return false;
}
-static bool reg_set_and_check(struct e1000_adapter *adapter, uint64_t *data,
- int reg, uint32_t mask, uint32_t write)
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
{
- uint8_t __iomem *address = adapter->hw.hw_addr + reg;
- uint32_t read;
+ u8 __iomem *address = adapter->hw.hw_addr + reg;
+ u32 read;
writel(write & mask, address);
read = readl(address);
@@ -788,10 +788,10 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, uint64_t *data,
} while (0)
static int
-e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
+e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
{
- uint32_t value, before, after;
- uint32_t i, toggle;
+ u32 value, before, after;
+ u32 i, toggle;
/* The status register is Read Only, so a write should fail.
* Some bits that get toggled are ignored.
@@ -884,11 +884,11 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
}
static int
-e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data)
+e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
{
- uint16_t temp;
- uint16_t checksum = 0;
- uint16_t i;
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
*data = 0;
/* Read and add up the contents of the EEPROM */
@@ -901,7 +901,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data)
}
/* If Checksum is not Correct return error else test passed */
- if ((checksum != (uint16_t) EEPROM_SUM) && !(*data))
+ if ((checksum != (u16) EEPROM_SUM) && !(*data))
*data = 2;
return *data;
@@ -919,11 +919,12 @@ e1000_test_intr(int irq, void *data)
}
static int
-e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
+e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
{
struct net_device *netdev = adapter->netdev;
- uint32_t mask, i=0, shared_int = TRUE;
- uint32_t irq = adapter->pdev->irq;
+ u32 mask, i = 0;
+ bool shared_int = true;
+ u32 irq = adapter->pdev->irq;
*data = 0;
@@ -931,7 +932,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
/* Hook up test interrupt handler just for this test */
if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
netdev))
- shared_int = FALSE;
+ shared_int = false;
else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
netdev->name, netdev)) {
*data = 1;
@@ -1069,7 +1070,7 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter)
struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
- uint32_t rctl;
+ u32 rctl;
int i, ret_val;
/* Setup Tx descriptor ring and Tx buffers */
@@ -1095,8 +1096,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter)
txdr->next_to_use = txdr->next_to_clean = 0;
E1000_WRITE_REG(&adapter->hw, TDBAL,
- ((uint64_t) txdr->dma & 0x00000000FFFFFFFF));
- E1000_WRITE_REG(&adapter->hw, TDBAH, ((uint64_t) txdr->dma >> 32));
+ ((u64) txdr->dma & 0x00000000FFFFFFFF));
+ E1000_WRITE_REG(&adapter->hw, TDBAH, ((u64) txdr->dma >> 32));
E1000_WRITE_REG(&adapter->hw, TDLEN,
txdr->count * sizeof(struct e1000_tx_desc));
E1000_WRITE_REG(&adapter->hw, TDH, 0);
@@ -1152,8 +1153,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter)
rctl = E1000_READ_REG(&adapter->hw, RCTL);
E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
E1000_WRITE_REG(&adapter->hw, RDBAL,
- ((uint64_t) rxdr->dma & 0xFFFFFFFF));
- E1000_WRITE_REG(&adapter->hw, RDBAH, ((uint64_t) rxdr->dma >> 32));
+ ((u64) rxdr->dma & 0xFFFFFFFF));
+ E1000_WRITE_REG(&adapter->hw, RDBAH, ((u64) rxdr->dma >> 32));
E1000_WRITE_REG(&adapter->hw, RDLEN, rxdr->size);
E1000_WRITE_REG(&adapter->hw, RDH, 0);
E1000_WRITE_REG(&adapter->hw, RDT, 0);
@@ -1201,7 +1202,7 @@ e1000_phy_disable_receiver(struct e1000_adapter *adapter)
static void
e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
{
- uint16_t phy_reg;
+ u16 phy_reg;
/* Because we reset the PHY above, we need to re-force TX_CLK in the
* Extended PHY Specific Control Register to 25MHz clock. This
@@ -1225,8 +1226,8 @@ e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
static int
e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
{
- uint32_t ctrl_reg;
- uint16_t phy_reg;
+ u32 ctrl_reg;
+ u16 phy_reg;
/* Setup the Device Control Register for PHY loopback test. */
@@ -1292,10 +1293,10 @@ e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
static int
e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
{
- uint32_t ctrl_reg = 0;
- uint32_t stat_reg = 0;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
- adapter->hw.autoneg = FALSE;
+ adapter->hw.autoneg = false;
if (adapter->hw.phy_type == e1000_phy_m88) {
/* Auto-MDI/MDIX Off */
@@ -1362,8 +1363,8 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
static int
e1000_set_phy_loopback(struct e1000_adapter *adapter)
{
- uint16_t phy_reg = 0;
- uint16_t count = 0;
+ u16 phy_reg = 0;
+ u16 count = 0;
switch (adapter->hw.mac_type) {
case e1000_82543:
@@ -1415,7 +1416,7 @@ static int
e1000_setup_loopback_test(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- uint32_t rctl;
+ u32 rctl;
if (hw->media_type == e1000_media_type_fiber ||
hw->media_type == e1000_media_type_internal_serdes) {
@@ -1450,8 +1451,8 @@ static void
e1000_loopback_cleanup(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- uint32_t rctl;
- uint16_t phy_reg;
+ u32 rctl;
+ u16 phy_reg;
rctl = E1000_READ_REG(hw, RCTL);
rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
@@ -1473,7 +1474,7 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
case e1000_82545_rev_3:
case e1000_82546_rev_3:
default:
- hw->autoneg = TRUE;
+ hw->autoneg = true;
if (hw->phy_type == e1000_phy_gg82563)
e1000_write_phy_reg(hw,
GG82563_PHY_KMRN_MODE_CTRL,
@@ -1577,7 +1578,7 @@ e1000_run_loopback_test(struct e1000_adapter *adapter)
}
static int
-e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data)
+e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
{
/* PHY loopback cannot be performed if SoL/IDER
* sessions are active */
@@ -1602,18 +1603,18 @@ out:
}
static int
-e1000_link_test(struct e1000_adapter *adapter, uint64_t *data)
+e1000_link_test(struct e1000_adapter *adapter, u64 *data)
{
*data = 0;
if (adapter->hw.media_type == e1000_media_type_internal_serdes) {
int i = 0;
- adapter->hw.serdes_link_down = TRUE;
+ adapter->hw.serdes_link_down = true;
/* On some blade server designs, link establishment
* could take as long as 2-3 minutes */
do {
e1000_check_for_link(&adapter->hw);
- if (adapter->hw.serdes_link_down == FALSE)
+ if (!adapter->hw.serdes_link_down)
return *data;
msleep(20);
} while (i++ < 3750);
@@ -1646,19 +1647,19 @@ e1000_get_sset_count(struct net_device *netdev, int sset)
static void
e1000_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, uint64_t *data)
+ struct ethtool_test *eth_test, u64 *data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- boolean_t if_running = netif_running(netdev);
+ bool if_running = netif_running(netdev);
set_bit(__E1000_TESTING, &adapter->flags);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
/* save speed, duplex, autoneg settings */
- uint16_t autoneg_advertised = adapter->hw.autoneg_advertised;
- uint8_t forced_speed_duplex = adapter->hw.forced_speed_duplex;
- uint8_t autoneg = adapter->hw.autoneg;
+ u16 autoneg_advertised = adapter->hw.autoneg_advertised;
+ u8 forced_speed_duplex = adapter->hw.forced_speed_duplex;
+ u8 autoneg = adapter->hw.autoneg;
DPRINTK(HW, INFO, "offline testing starting\n");
@@ -1876,7 +1877,7 @@ e1000_led_blink_callback(unsigned long data)
}
static int
-e1000_phys_id(struct net_device *netdev, uint32_t data)
+e1000_phys_id(struct net_device *netdev, u32 data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1926,7 +1927,7 @@ e1000_nway_reset(struct net_device *netdev)
static void
e1000_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
+ struct ethtool_stats *stats, u64 *data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
int i;
@@ -1935,15 +1936,15 @@ e1000_get_ethtool_stats(struct net_device *netdev,
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
- sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
/* BUG_ON(i != E1000_STATS_LEN); */
}
static void
-e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
+e1000_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
{
- uint8_t *p = data;
+ u8 *p = data;
int i;
switch (stringset) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 7c6888c58c21d2e6e6033a9b6219caf3a6a8f6b6..9a4b6cbddf2cbdba6544c38a6fced642a6231b34 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -33,106 +33,107 @@
#include "e1000_hw.h"
-static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
-static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
-static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
-static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
-static int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask);
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask);
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data);
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw);
static void e1000_release_software_semaphore(struct e1000_hw *hw);
-static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw);
-static int32_t e1000_check_downshift(struct e1000_hw *hw);
-static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity);
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity);
static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
static void e1000_clear_vfta(struct e1000_hw *hw);
-static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw);
-static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up);
-static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw);
-static int32_t e1000_detect_gig_phy(struct e1000_hw *hw);
-static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank);
-static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw);
-static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length);
-static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
-static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static int32_t e1000_get_software_flag(struct e1000_hw *hw);
-static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw);
-static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout);
-static int32_t e1000_id_led_init(struct e1000_hw *hw);
-static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
-static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+ bool link_up);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length);
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_get_software_flag(struct e1000_hw *hw);
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, u32 cnf_base_addr, u32 cnf_size);
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
static void e1000_init_rx_addrs(struct e1000_hw *hw);
static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
-static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
-static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
-static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw);
-static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum);
-static int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr);
-static int32_t e1000_mng_write_commit(struct e1000_hw *hw);
-static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
-static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, u16 offset, u8 *sum);
+static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr);
+static s32 e1000_mng_write_commit(struct e1000_hw *hw);
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
-static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t *data);
-static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte);
-static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte);
-static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data);
-static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t *data);
-static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data);
-static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
-static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data);
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 *data);
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 data);
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
static void e1000_release_software_flag(struct e1000_hw *hw);
-static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active);
-static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active);
-static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop);
static void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
-static int32_t e1000_wait_autoneg(struct e1000_hw *hw);
-static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
-static int32_t e1000_set_phy_type(struct e1000_hw *hw);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
static void e1000_phy_init_script(struct e1000_hw *hw);
-static int32_t e1000_setup_copper_link(struct e1000_hw *hw);
-static int32_t e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
-static int32_t e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
-static int32_t e1000_phy_force_speed_duplex(struct e1000_hw *hw);
-static int32_t e1000_config_mac_to_phy(struct e1000_hw *hw);
-static void e1000_raise_mdi_clk(struct e1000_hw *hw, uint32_t *ctrl);
-static void e1000_lower_mdi_clk(struct e1000_hw *hw, uint32_t *ctrl);
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, uint32_t data,
- uint16_t count);
-static uint16_t e1000_shift_in_mdi_bits(struct e1000_hw *hw);
-static int32_t e1000_phy_reset_dsp(struct e1000_hw *hw);
-static int32_t e1000_write_eeprom_spi(struct e1000_hw *hw, uint16_t offset,
- uint16_t words, uint16_t *data);
-static int32_t e1000_write_eeprom_microwire(struct e1000_hw *hw,
- uint16_t offset, uint16_t words,
- uint16_t *data);
-static int32_t e1000_spi_eeprom_ready(struct e1000_hw *hw);
-static void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
-static void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
-static void e1000_shift_out_ee_bits(struct e1000_hw *hw, uint16_t data,
- uint16_t count);
-static int32_t e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t phy_data);
-static int32_t e1000_read_phy_reg_ex(struct e1000_hw *hw,uint32_t reg_addr,
- uint16_t *phy_data);
-static uint16_t e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count);
-static int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
+ u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw,
+ u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data,
+ u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
static void e1000_release_eeprom(struct e1000_hw *hw);
static void e1000_standby_eeprom(struct e1000_hw *hw);
-static int32_t e1000_set_vco_speed(struct e1000_hw *hw);
-static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw);
-static int32_t e1000_set_phy_mode(struct e1000_hw *hw);
-static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer);
-static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length);
-static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
- uint16_t duplex);
-static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
+ u16 duplex);
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
/* IGP cable length table */
static const
-uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
{ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
@@ -143,7 +144,7 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
static const
-uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
+u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
@@ -158,7 +159,7 @@ uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_set_phy_type(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_set_phy_type");
@@ -212,8 +213,8 @@ e1000_set_phy_type(struct e1000_hw *hw)
static void
e1000_phy_init_script(struct e1000_hw *hw)
{
- uint32_t ret_val;
- uint16_t phy_saved_data;
+ u32 ret_val;
+ u16 phy_saved_data;
DEBUGFUNC("e1000_phy_init_script");
@@ -271,7 +272,7 @@ e1000_phy_init_script(struct e1000_hw *hw)
e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
if (hw->mac_type == e1000_82547) {
- uint16_t fused, fine, coarse;
+ u16 fused, fine, coarse;
/* Move to analog registers page */
e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
@@ -305,7 +306,7 @@ e1000_phy_init_script(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_set_mac_type(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_set_mac_type");
@@ -425,22 +426,22 @@ e1000_set_mac_type(struct e1000_hw *hw)
switch (hw->mac_type) {
case e1000_ich8lan:
- hw->swfwhw_semaphore_present = TRUE;
- hw->asf_firmware_present = TRUE;
+ hw->swfwhw_semaphore_present = true;
+ hw->asf_firmware_present = true;
break;
case e1000_80003es2lan:
- hw->swfw_sync_present = TRUE;
+ hw->swfw_sync_present = true;
/* fall through */
case e1000_82571:
case e1000_82572:
case e1000_82573:
- hw->eeprom_semaphore_present = TRUE;
+ hw->eeprom_semaphore_present = true;
/* fall through */
case e1000_82541:
case e1000_82547:
case e1000_82541_rev_2:
case e1000_82547_rev_2:
- hw->asf_firmware_present = TRUE;
+ hw->asf_firmware_present = true;
break;
default:
break;
@@ -450,20 +451,20 @@ e1000_set_mac_type(struct e1000_hw *hw)
* FD mode
*/
if (hw->mac_type == e1000_82543)
- hw->bad_tx_carr_stats_fd = TRUE;
+ hw->bad_tx_carr_stats_fd = true;
/* capable of receiving management packets to the host */
if (hw->mac_type >= e1000_82571)
- hw->has_manc2h = TRUE;
+ hw->has_manc2h = true;
/* In rare occasions, ESB2 systems would end up started without
* the RX unit being turned on.
*/
if (hw->mac_type == e1000_80003es2lan)
- hw->rx_needs_kicking = TRUE;
+ hw->rx_needs_kicking = true;
if (hw->mac_type > e1000_82544)
- hw->has_smbus = TRUE;
+ hw->has_smbus = true;
return E1000_SUCCESS;
}
@@ -476,13 +477,13 @@ e1000_set_mac_type(struct e1000_hw *hw)
void
e1000_set_media_type(struct e1000_hw *hw)
{
- uint32_t status;
+ u32 status;
DEBUGFUNC("e1000_set_media_type");
if (hw->mac_type != e1000_82543) {
/* tbi_compatibility is only valid on 82543 */
- hw->tbi_compatibility_en = FALSE;
+ hw->tbi_compatibility_en = false;
}
switch (hw->device_id) {
@@ -513,7 +514,7 @@ e1000_set_media_type(struct e1000_hw *hw)
if (status & E1000_STATUS_TBIMODE) {
hw->media_type = e1000_media_type_fiber;
/* tbi_compatibility not valid on fiber */
- hw->tbi_compatibility_en = FALSE;
+ hw->tbi_compatibility_en = false;
} else {
hw->media_type = e1000_media_type_copper;
}
@@ -527,17 +528,17 @@ e1000_set_media_type(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_reset_hw(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint32_t ctrl_ext;
- uint32_t icr;
- uint32_t manc;
- uint32_t led_ctrl;
- uint32_t timeout;
- uint32_t extcnf_ctrl;
- int32_t ret_val;
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ u32 timeout;
+ u32 extcnf_ctrl;
+ s32 ret_val;
DEBUGFUNC("e1000_reset_hw");
@@ -569,7 +570,7 @@ e1000_reset_hw(struct e1000_hw *hw)
E1000_WRITE_FLUSH(hw);
/* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
- hw->tbi_compatibility_on = FALSE;
+ hw->tbi_compatibility_on = false;
/* Delay to allow any outstanding PCI transactions to complete before
* resetting the device
@@ -682,7 +683,7 @@ e1000_reset_hw(struct e1000_hw *hw)
msleep(20);
break;
case e1000_82573:
- if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
+ if (!e1000_is_onboard_nvm_eeprom(hw)) {
udelay(10);
ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_EE_RST;
@@ -729,7 +730,7 @@ e1000_reset_hw(struct e1000_hw *hw)
}
if (hw->mac_type == e1000_ich8lan) {
- uint32_t kab = E1000_READ_REG(hw, KABGTXD);
+ u32 kab = E1000_READ_REG(hw, KABGTXD);
kab |= E1000_KABGTXD_BGSQLBIAS;
E1000_WRITE_REG(hw, KABGTXD, kab);
}
@@ -751,10 +752,10 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
{
if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
/* Settings common to all PCI-express silicon */
- uint32_t reg_ctrl, reg_ctrl_ext;
- uint32_t reg_tarc0, reg_tarc1;
- uint32_t reg_tctl;
- uint32_t reg_txdctl, reg_txdctl1;
+ u32 reg_ctrl, reg_ctrl_ext;
+ u32 reg_tarc0, reg_tarc1;
+ u32 reg_tctl;
+ u32 reg_txdctl, reg_txdctl1;
/* link autonegotiation/sync workarounds */
reg_tarc0 = E1000_READ_REG(hw, TARC0);
@@ -865,15 +866,15 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
* configuration and flow control settings. Clears all on-chip counters. Leaves
* the transmit and receive units disabled and uninitialized.
*****************************************************************************/
-int32_t
+s32
e1000_init_hw(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint32_t i;
- int32_t ret_val;
- uint32_t mta_size;
- uint32_t reg_data;
- uint32_t ctrl_ext;
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 reg_data;
+ u32 ctrl_ext;
DEBUGFUNC("e1000_init_hw");
@@ -1019,7 +1020,7 @@ e1000_init_hw(struct e1000_hw *hw)
if (hw->mac_type == e1000_82573) {
- uint32_t gcr = E1000_READ_REG(hw, GCR);
+ u32 gcr = E1000_READ_REG(hw, GCR);
gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
E1000_WRITE_REG(hw, GCR, gcr);
}
@@ -1053,11 +1054,11 @@ e1000_init_hw(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code.
*****************************************************************************/
-static int32_t
+static s32
e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
{
- uint16_t eeprom_data;
- int32_t ret_val;
+ u16 eeprom_data;
+ s32 ret_val;
DEBUGFUNC("e1000_adjust_serdes_amplitude");
@@ -1099,12 +1100,12 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
* established. Assumes the hardware has previously been reset and the
* transmitter and receiver are not enabled.
*****************************************************************************/
-int32_t
+s32
e1000_setup_link(struct e1000_hw *hw)
{
- uint32_t ctrl_ext;
- int32_t ret_val;
- uint16_t eeprom_data;
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
DEBUGFUNC("e1000_setup_link");
@@ -1232,15 +1233,15 @@ e1000_setup_link(struct e1000_hw *hw)
* link. Assumes the hardware has been previously reset and the transmitter
* and receiver are not enabled.
*****************************************************************************/
-static int32_t
+static s32
e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint32_t status;
- uint32_t txcw = 0;
- uint32_t i;
- uint32_t signal = 0;
- int32_t ret_val;
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
DEBUGFUNC("e1000_setup_fiber_serdes_link");
@@ -1379,12 +1380,12 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_copper_link_preconfig(struct e1000_hw *hw)
{
- uint32_t ctrl;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_preconfig");
@@ -1428,7 +1429,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
if (hw->mac_type <= e1000_82543 ||
hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
- hw->phy_reset_disable = FALSE;
+ hw->phy_reset_disable = false;
return E1000_SUCCESS;
}
@@ -1439,12 +1440,12 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_igp_setup(struct e1000_hw *hw)
{
- uint32_t led_ctrl;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_igp_setup");
@@ -1470,7 +1471,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
/* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
if (hw->phy_type == e1000_phy_igp) {
/* disable lplu d3 during driver init */
- ret_val = e1000_set_d3_lplu_state(hw, FALSE);
+ ret_val = e1000_set_d3_lplu_state(hw, false);
if (ret_val) {
DEBUGOUT("Error Disabling LPLU D3\n");
return ret_val;
@@ -1478,7 +1479,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
}
/* disable lplu d0 during driver init */
- ret_val = e1000_set_d0_lplu_state(hw, FALSE);
+ ret_val = e1000_set_d0_lplu_state(hw, false);
if (ret_val) {
DEBUGOUT("Error Disabling LPLU D0\n");
return ret_val;
@@ -1586,12 +1587,12 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_ggp_setup(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
- uint32_t reg_data;
+ s32 ret_val;
+ u16 phy_data;
+ u32 reg_data;
DEBUGFUNC("e1000_copper_link_ggp_setup");
@@ -1691,7 +1692,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
* firmware will have already initialized them. We only initialize
* them if the HW is not in IAMT mode.
*/
- if (e1000_check_mng_mode(hw) == FALSE) {
+ if (!e1000_check_mng_mode(hw)) {
/* Enable Electrical Idle on the PHY */
phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
@@ -1734,11 +1735,11 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_mgp_setup(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_mgp_setup");
@@ -1838,11 +1839,11 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*********************************************************************/
-static int32_t
+static s32
e1000_copper_link_autoneg(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_copper_link_autoneg");
@@ -1892,7 +1893,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
}
}
- hw->get_link_status = TRUE;
+ hw->get_link_status = true;
return E1000_SUCCESS;
}
@@ -1909,10 +1910,10 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_copper_link_postconfig(struct e1000_hw *hw)
{
- int32_t ret_val;
+ s32 ret_val;
DEBUGFUNC("e1000_copper_link_postconfig");
if (hw->mac_type >= e1000_82544) {
@@ -1932,7 +1933,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
/* Config DSP to improve Giga link quality */
if (hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_config_dsp_after_link_change(hw, TRUE);
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
if (ret_val) {
DEBUGOUT("Error Configuring DSP after link up\n");
return ret_val;
@@ -1947,13 +1948,13 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_setup_copper_link(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t i;
- uint16_t phy_data;
- uint16_t reg_data;
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+ u16 reg_data;
DEBUGFUNC("e1000_setup_copper_link");
@@ -2061,12 +2062,12 @@ e1000_setup_copper_link(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
+static s32
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
{
- int32_t ret_val = E1000_SUCCESS;
- uint32_t tipg;
- uint16_t reg_data;
+ s32 ret_val = E1000_SUCCESS;
+ u32 tipg;
+ u16 reg_data;
DEBUGFUNC("e1000_configure_kmrn_for_10_100");
@@ -2097,12 +2098,12 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
return ret_val;
}
-static int32_t
+static s32
e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
{
- int32_t ret_val = E1000_SUCCESS;
- uint16_t reg_data;
- uint32_t tipg;
+ s32 ret_val = E1000_SUCCESS;
+ u16 reg_data;
+ u32 tipg;
DEBUGFUNC("e1000_configure_kmrn_for_1000");
@@ -2134,12 +2135,12 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-int32_t
+s32
e1000_phy_setup_autoneg(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t mii_autoneg_adv_reg;
- uint16_t mii_1000t_ctrl_reg;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
DEBUGFUNC("e1000_phy_setup_autoneg");
@@ -2283,15 +2284,15 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_phy_force_speed_duplex(struct e1000_hw *hw)
{
- uint32_t ctrl;
- int32_t ret_val;
- uint16_t mii_ctrl_reg;
- uint16_t mii_status_reg;
- uint16_t phy_data;
- uint16_t i;
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
DEBUGFUNC("e1000_phy_force_speed_duplex");
@@ -2537,7 +2538,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
void
e1000_config_collision_dist(struct e1000_hw *hw)
{
- uint32_t tctl, coll_dist;
+ u32 tctl, coll_dist;
DEBUGFUNC("e1000_config_collision_dist");
@@ -2564,12 +2565,12 @@ e1000_config_collision_dist(struct e1000_hw *hw)
* The contents of the PHY register containing the needed information need to
* be passed in.
******************************************************************************/
-static int32_t
+static s32
e1000_config_mac_to_phy(struct e1000_hw *hw)
{
- uint32_t ctrl;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_config_mac_to_phy");
@@ -2623,10 +2624,10 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
* by the PHY rather than the MAC. Software must also configure these
* bits when link is forced on a fiber connection.
*****************************************************************************/
-int32_t
+s32
e1000_force_mac_fc(struct e1000_hw *hw)
{
- uint32_t ctrl;
+ u32 ctrl;
DEBUGFUNC("e1000_force_mac_fc");
@@ -2690,15 +2691,15 @@ e1000_force_mac_fc(struct e1000_hw *hw)
* based on the flow control negotiated by the PHY. In TBI mode, the TFCE
* and RFCE bits will be automaticaly set to the negotiated flow control mode.
*****************************************************************************/
-static int32_t
+static s32
e1000_config_fc_after_link_up(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t mii_status_reg;
- uint16_t mii_nway_adv_reg;
- uint16_t mii_nway_lp_ability_reg;
- uint16_t speed;
- uint16_t duplex;
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
DEBUGFUNC("e1000_config_fc_after_link_up");
@@ -2895,17 +2896,17 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
*
* Called by any function that needs to check the link status of the adapter.
*****************************************************************************/
-int32_t
+s32
e1000_check_for_link(struct e1000_hw *hw)
{
- uint32_t rxcw = 0;
- uint32_t ctrl;
- uint32_t status;
- uint32_t rctl;
- uint32_t icr;
- uint32_t signal = 0;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_check_for_link");
@@ -2923,7 +2924,7 @@ e1000_check_for_link(struct e1000_hw *hw)
if (hw->media_type == e1000_media_type_fiber) {
signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
if (status & E1000_STATUS_LU)
- hw->get_link_status = FALSE;
+ hw->get_link_status = false;
}
}
@@ -2947,7 +2948,7 @@ e1000_check_for_link(struct e1000_hw *hw)
return ret_val;
if (phy_data & MII_SR_LINK_STATUS) {
- hw->get_link_status = FALSE;
+ hw->get_link_status = false;
/* Check if there was DownShift, must be checked immediately after
* link-up */
e1000_check_downshift(hw);
@@ -2973,7 +2974,7 @@ e1000_check_for_link(struct e1000_hw *hw)
} else {
/* No link detected */
- e1000_config_dsp_after_link_change(hw, FALSE);
+ e1000_config_dsp_after_link_change(hw, false);
return 0;
}
@@ -2983,7 +2984,7 @@ e1000_check_for_link(struct e1000_hw *hw)
if (!hw->autoneg) return -E1000_ERR_CONFIG;
/* optimize the dsp settings for the igp phy */
- e1000_config_dsp_after_link_change(hw, TRUE);
+ e1000_config_dsp_after_link_change(hw, true);
/* We have a M88E1000 PHY and Auto-Neg is enabled. If we
* have Si on board that is 82544 or newer, Auto
@@ -3021,7 +3022,7 @@ e1000_check_for_link(struct e1000_hw *hw)
* at gigabit speed, we turn on TBI compatibility.
*/
if (hw->tbi_compatibility_en) {
- uint16_t speed, duplex;
+ u16 speed, duplex;
ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
DEBUGOUT("Error getting link speed and duplex\n");
@@ -3036,7 +3037,7 @@ e1000_check_for_link(struct e1000_hw *hw)
rctl = E1000_READ_REG(hw, RCTL);
rctl &= ~E1000_RCTL_SBP;
E1000_WRITE_REG(hw, RCTL, rctl);
- hw->tbi_compatibility_on = FALSE;
+ hw->tbi_compatibility_on = false;
}
} else {
/* If TBI compatibility is was previously off, turn it on. For
@@ -3045,7 +3046,7 @@ e1000_check_for_link(struct e1000_hw *hw)
* will look like CRC errors to to the hardware.
*/
if (!hw->tbi_compatibility_on) {
- hw->tbi_compatibility_on = TRUE;
+ hw->tbi_compatibility_on = true;
rctl = E1000_READ_REG(hw, RCTL);
rctl |= E1000_RCTL_SBP;
E1000_WRITE_REG(hw, RCTL, rctl);
@@ -3098,7 +3099,7 @@ e1000_check_for_link(struct e1000_hw *hw)
E1000_WRITE_REG(hw, TXCW, hw->txcw);
E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
- hw->serdes_link_down = FALSE;
+ hw->serdes_link_down = false;
}
/* If we force link for non-auto-negotiation switch, check link status
* based on MAC synchronization for internal serdes media type.
@@ -3109,11 +3110,11 @@ e1000_check_for_link(struct e1000_hw *hw)
udelay(10);
if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) {
if (!(rxcw & E1000_RXCW_IV)) {
- hw->serdes_link_down = FALSE;
+ hw->serdes_link_down = false;
DEBUGOUT("SERDES: Link is up.\n");
}
} else {
- hw->serdes_link_down = TRUE;
+ hw->serdes_link_down = true;
DEBUGOUT("SERDES: Link is down.\n");
}
}
@@ -3131,14 +3132,14 @@ e1000_check_for_link(struct e1000_hw *hw)
* speed - Speed of the connection
* duplex - Duplex setting of the connection
*****************************************************************************/
-int32_t
+s32
e1000_get_speed_and_duplex(struct e1000_hw *hw,
- uint16_t *speed,
- uint16_t *duplex)
+ u16 *speed,
+ u16 *duplex)
{
- uint32_t status;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_get_speed_and_duplex");
@@ -3213,12 +3214,12 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_wait_autoneg(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t i;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
DEBUGFUNC("e1000_wait_autoneg");
DEBUGOUT("Waiting for Auto-Neg to complete.\n");
@@ -3250,7 +3251,7 @@ e1000_wait_autoneg(struct e1000_hw *hw)
******************************************************************************/
static void
e1000_raise_mdi_clk(struct e1000_hw *hw,
- uint32_t *ctrl)
+ u32 *ctrl)
{
/* Raise the clock input to the Management Data Clock (by setting the MDC
* bit), and then delay 10 microseconds.
@@ -3268,7 +3269,7 @@ e1000_raise_mdi_clk(struct e1000_hw *hw,
******************************************************************************/
static void
e1000_lower_mdi_clk(struct e1000_hw *hw,
- uint32_t *ctrl)
+ u32 *ctrl)
{
/* Lower the clock input to the Management Data Clock (by clearing the MDC
* bit), and then delay 10 microseconds.
@@ -3289,11 +3290,11 @@ e1000_lower_mdi_clk(struct e1000_hw *hw,
******************************************************************************/
static void
e1000_shift_out_mdi_bits(struct e1000_hw *hw,
- uint32_t data,
- uint16_t count)
+ u32 data,
+ u16 count)
{
- uint32_t ctrl;
- uint32_t mask;
+ u32 ctrl;
+ u32 mask;
/* We need to shift "count" number of bits out to the PHY. So, the value
* in the "data" parameter will be shifted out to the PHY one bit at a
@@ -3337,12 +3338,12 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw,
*
* Bits are shifted in in MSB to LSB order.
******************************************************************************/
-static uint16_t
+static u16
e1000_shift_in_mdi_bits(struct e1000_hw *hw)
{
- uint32_t ctrl;
- uint16_t data = 0;
- uint8_t i;
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
/* In order to read a register from the PHY, we need to shift in a total
* of 18 bits from the PHY. The first two bit (turnaround) times are used
@@ -3383,13 +3384,13 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw)
return data;
}
-static int32_t
-e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
+static s32
+e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
{
- uint32_t swfw_sync = 0;
- uint32_t swmask = mask;
- uint32_t fwmask = mask << 16;
- int32_t timeout = 200;
+ u32 swfw_sync = 0;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 timeout = 200;
DEBUGFUNC("e1000_swfw_sync_acquire");
@@ -3428,10 +3429,10 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
}
static void
-e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
+e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
{
- uint32_t swfw_sync;
- uint32_t swmask = mask;
+ u32 swfw_sync;
+ u32 swmask = mask;
DEBUGFUNC("e1000_swfw_sync_release");
@@ -3463,13 +3464,13 @@ e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
* hw - Struct containing variables accessed by shared code
* reg_addr - address of the PHY register to read
******************************************************************************/
-int32_t
+s32
e1000_read_phy_reg(struct e1000_hw *hw,
- uint32_t reg_addr,
- uint16_t *phy_data)
+ u32 reg_addr,
+ u16 *phy_data)
{
- uint32_t ret_val;
- uint16_t swfw;
+ u32 ret_val;
+ u16 swfw;
DEBUGFUNC("e1000_read_phy_reg");
@@ -3487,7 +3488,7 @@ e1000_read_phy_reg(struct e1000_hw *hw,
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (uint16_t)reg_addr);
+ (u16)reg_addr);
if (ret_val) {
e1000_swfw_sync_release(hw, swfw);
return ret_val;
@@ -3498,14 +3499,14 @@ e1000_read_phy_reg(struct e1000_hw *hw,
/* Select Configuration Page */
if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
} else {
/* Use Alternative Page Select register to access
* registers 30 and 31
*/
ret_val = e1000_write_phy_reg_ex(hw,
GG82563_PHY_PAGE_SELECT_ALT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
}
if (ret_val) {
@@ -3522,13 +3523,13 @@ e1000_read_phy_reg(struct e1000_hw *hw,
return ret_val;
}
-static int32_t
-e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t *phy_data)
+static s32
+e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
{
- uint32_t i;
- uint32_t mdic = 0;
- const uint32_t phy_addr = 1;
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
DEBUGFUNC("e1000_read_phy_reg_ex");
@@ -3562,7 +3563,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
DEBUGOUT("MDI Error\n");
return -E1000_ERR_PHY;
}
- *phy_data = (uint16_t) mdic;
+ *phy_data = (u16) mdic;
} else {
/* We must first send a preamble through the MDIO pin to signal the
* beginning of an MII instruction. This is done by sending 32
@@ -3602,12 +3603,12 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
* reg_addr - address of the PHY register to write
* data - data to write to the PHY
******************************************************************************/
-int32_t
-e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t phy_data)
+s32
+e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
{
- uint32_t ret_val;
- uint16_t swfw;
+ u32 ret_val;
+ u16 swfw;
DEBUGFUNC("e1000_write_phy_reg");
@@ -3625,7 +3626,7 @@ e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (uint16_t)reg_addr);
+ (u16)reg_addr);
if (ret_val) {
e1000_swfw_sync_release(hw, swfw);
return ret_val;
@@ -3636,14 +3637,14 @@ e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
/* Select Configuration Page */
if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
} else {
/* Use Alternative Page Select register to access
* registers 30 and 31
*/
ret_val = e1000_write_phy_reg_ex(hw,
GG82563_PHY_PAGE_SELECT_ALT,
- (uint16_t)((uint16_t)reg_addr >> GG82563_PAGE_SHIFT));
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
}
if (ret_val) {
@@ -3660,13 +3661,13 @@ e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
return ret_val;
}
-static int32_t
-e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
- uint16_t phy_data)
+static s32
+e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
{
- uint32_t i;
- uint32_t mdic = 0;
- const uint32_t phy_addr = 1;
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
DEBUGFUNC("e1000_write_phy_reg_ex");
@@ -3680,7 +3681,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
* for the PHY register in the MDI Control register. The MAC will take
* care of interfacing with the PHY to send the desired data.
*/
- mdic = (((uint32_t) phy_data) |
+ mdic = (((u32) phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
@@ -3714,7 +3715,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
(PHY_OP_WRITE << 12) | (PHY_SOF << 14));
mdic <<= 16;
- mdic |= (uint32_t) phy_data;
+ mdic |= (u32) phy_data;
e1000_shift_out_mdi_bits(hw, mdic, 32);
}
@@ -3722,13 +3723,13 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr,
return E1000_SUCCESS;
}
-static int32_t
+static s32
e1000_read_kmrn_reg(struct e1000_hw *hw,
- uint32_t reg_addr,
- uint16_t *data)
+ u32 reg_addr,
+ u16 *data)
{
- uint32_t reg_val;
- uint16_t swfw;
+ u32 reg_val;
+ u16 swfw;
DEBUGFUNC("e1000_read_kmrn_reg");
if ((hw->mac_type == e1000_80003es2lan) &&
@@ -3749,19 +3750,19 @@ e1000_read_kmrn_reg(struct e1000_hw *hw,
/* Read the data returned */
reg_val = E1000_READ_REG(hw, KUMCTRLSTA);
- *data = (uint16_t)reg_val;
+ *data = (u16)reg_val;
e1000_swfw_sync_release(hw, swfw);
return E1000_SUCCESS;
}
-static int32_t
+static s32
e1000_write_kmrn_reg(struct e1000_hw *hw,
- uint32_t reg_addr,
- uint16_t data)
+ u32 reg_addr,
+ u16 data)
{
- uint32_t reg_val;
- uint16_t swfw;
+ u32 reg_val;
+ u16 swfw;
DEBUGFUNC("e1000_write_kmrn_reg");
if ((hw->mac_type == e1000_80003es2lan) &&
@@ -3787,13 +3788,13 @@ e1000_write_kmrn_reg(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-int32_t
+s32
e1000_phy_hw_reset(struct e1000_hw *hw)
{
- uint32_t ctrl, ctrl_ext;
- uint32_t led_ctrl;
- int32_t ret_val;
- uint16_t swfw;
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 swfw;
DEBUGFUNC("e1000_phy_hw_reset");
@@ -3881,11 +3882,11 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
*
* Sets bit 15 of the MII Control register
******************************************************************************/
-int32_t
+s32
e1000_phy_reset(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_phy_reset");
@@ -3936,9 +3937,9 @@ e1000_phy_reset(struct e1000_hw *hw)
void
e1000_phy_powerdown_workaround(struct e1000_hw *hw)
{
- int32_t reg;
- uint16_t phy_data;
- int32_t retry = 0;
+ s32 reg;
+ u16 phy_data;
+ s32 retry = 0;
DEBUGFUNC("e1000_phy_powerdown_workaround");
@@ -3986,13 +3987,13 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw)
*
* hw - struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
{
- int32_t ret_val;
- int32_t reg;
- int32_t cnt;
- uint16_t phy_data;
+ s32 ret_val;
+ s32 reg;
+ s32 cnt;
+ u16 phy_data;
if (hw->kmrn_lock_loss_workaround_disabled)
return E1000_SUCCESS;
@@ -4039,12 +4040,12 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_detect_gig_phy(struct e1000_hw *hw)
{
- int32_t phy_init_status, ret_val;
- uint16_t phy_id_high, phy_id_low;
- boolean_t match = FALSE;
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
DEBUGFUNC("e1000_detect_gig_phy");
@@ -4075,46 +4076,46 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw->phy_id = (uint32_t) (phy_id_high << 16);
+ hw->phy_id = (u32) (phy_id_high << 16);
udelay(20);
ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
if (ret_val)
return ret_val;
- hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK);
- hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
+ hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
switch (hw->mac_type) {
case e1000_82543:
- if (hw->phy_id == M88E1000_E_PHY_ID) match = TRUE;
+ if (hw->phy_id == M88E1000_E_PHY_ID) match = true;
break;
case e1000_82544:
- if (hw->phy_id == M88E1000_I_PHY_ID) match = TRUE;
+ if (hw->phy_id == M88E1000_I_PHY_ID) match = true;
break;
case e1000_82540:
case e1000_82545:
case e1000_82545_rev_3:
case e1000_82546:
case e1000_82546_rev_3:
- if (hw->phy_id == M88E1011_I_PHY_ID) match = TRUE;
+ if (hw->phy_id == M88E1011_I_PHY_ID) match = true;
break;
case e1000_82541:
case e1000_82541_rev_2:
case e1000_82547:
case e1000_82547_rev_2:
- if (hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE;
+ if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true;
break;
case e1000_82573:
- if (hw->phy_id == M88E1111_I_PHY_ID) match = TRUE;
+ if (hw->phy_id == M88E1111_I_PHY_ID) match = true;
break;
case e1000_80003es2lan:
- if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
+ if (hw->phy_id == GG82563_E_PHY_ID) match = true;
break;
case e1000_ich8lan:
- if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE;
- if (hw->phy_id == IFE_E_PHY_ID) match = TRUE;
- if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE;
- if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE;
+ if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_C_E_PHY_ID) match = true;
break;
default:
DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
@@ -4135,10 +4136,10 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
-static int32_t
+static s32
e1000_phy_reset_dsp(struct e1000_hw *hw)
{
- int32_t ret_val;
+ s32 ret_val;
DEBUGFUNC("e1000_phy_reset_dsp");
do {
@@ -4162,12 +4163,12 @@ e1000_phy_reset_dsp(struct e1000_hw *hw)
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-static int32_t
+static s32
e1000_phy_igp_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data, min_length, max_length, average;
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
e1000_rev_polarity polarity;
DEBUGFUNC("e1000_phy_igp_get_info");
@@ -4239,12 +4240,12 @@ e1000_phy_igp_get_info(struct e1000_hw *hw,
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-static int32_t
+static s32
e1000_phy_ife_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
e1000_rev_polarity polarity;
DEBUGFUNC("e1000_phy_ife_get_info");
@@ -4289,12 +4290,12 @@ e1000_phy_ife_get_info(struct e1000_hw *hw,
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-static int32_t
+static s32
e1000_phy_m88_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
e1000_rev_polarity polarity;
DEBUGFUNC("e1000_phy_m88_get_info");
@@ -4368,12 +4369,12 @@ e1000_phy_m88_get_info(struct e1000_hw *hw,
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-int32_t
+s32
e1000_phy_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_phy_get_info");
@@ -4414,7 +4415,7 @@ e1000_phy_get_info(struct e1000_hw *hw,
return e1000_phy_m88_get_info(hw, phy_info);
}
-int32_t
+s32
e1000_validate_mdi_setting(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_validate_mdi_settings");
@@ -4435,13 +4436,13 @@ e1000_validate_mdi_setting(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_init_eeprom_params(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd = E1000_READ_REG(hw, EECD);
- int32_t ret_val = E1000_SUCCESS;
- uint16_t eeprom_size;
+ u32 eecd = E1000_READ_REG(hw, EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
DEBUGFUNC("e1000_init_eeprom_params");
@@ -4455,8 +4456,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->opcode_bits = 3;
eeprom->address_bits = 6;
eeprom->delay_usec = 50;
- eeprom->use_eerd = FALSE;
- eeprom->use_eewr = FALSE;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
break;
case e1000_82540:
case e1000_82545:
@@ -4473,8 +4474,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->word_size = 64;
eeprom->address_bits = 6;
}
- eeprom->use_eerd = FALSE;
- eeprom->use_eewr = FALSE;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
break;
case e1000_82541:
case e1000_82541_rev_2:
@@ -4503,8 +4504,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->address_bits = 6;
}
}
- eeprom->use_eerd = FALSE;
- eeprom->use_eewr = FALSE;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
break;
case e1000_82571:
case e1000_82572:
@@ -4518,8 +4519,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->page_size = 8;
eeprom->address_bits = 8;
}
- eeprom->use_eerd = FALSE;
- eeprom->use_eewr = FALSE;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
break;
case e1000_82573:
eeprom->type = e1000_eeprom_spi;
@@ -4532,9 +4533,9 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->page_size = 8;
eeprom->address_bits = 8;
}
- eeprom->use_eerd = TRUE;
- eeprom->use_eewr = TRUE;
- if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
+ eeprom->use_eerd = true;
+ eeprom->use_eewr = true;
+ if (!e1000_is_onboard_nvm_eeprom(hw)) {
eeprom->type = e1000_eeprom_flash;
eeprom->word_size = 2048;
@@ -4555,24 +4556,24 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
eeprom->page_size = 8;
eeprom->address_bits = 8;
}
- eeprom->use_eerd = TRUE;
- eeprom->use_eewr = FALSE;
+ eeprom->use_eerd = true;
+ eeprom->use_eewr = false;
break;
case e1000_ich8lan:
{
- int32_t i = 0;
- uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
+ s32 i = 0;
+ u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
eeprom->type = e1000_eeprom_ich8;
- eeprom->use_eerd = FALSE;
- eeprom->use_eewr = FALSE;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
eeprom->word_size = E1000_SHADOW_RAM_WORDS;
/* Zero the shadow RAM structure. But don't load it from NVM
* so as to save time for driver init */
if (hw->eeprom_shadow_ram != NULL) {
for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
- hw->eeprom_shadow_ram[i].modified = FALSE;
+ hw->eeprom_shadow_ram[i].modified = false;
hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
}
}
@@ -4585,7 +4586,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
- hw->flash_bank_size /= 2 * sizeof(uint16_t);
+ hw->flash_bank_size /= 2 * sizeof(u16);
break;
}
@@ -4610,7 +4611,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
if (eeprom_size)
eeprom_size++;
} else {
- eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
E1000_EECD_SIZE_EX_SHIFT);
}
@@ -4627,7 +4628,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
*****************************************************************************/
static void
e1000_raise_ee_clk(struct e1000_hw *hw,
- uint32_t *eecd)
+ u32 *eecd)
{
/* Raise the clock input to the EEPROM (by setting the SK bit), and then
* wait microseconds.
@@ -4646,7 +4647,7 @@ e1000_raise_ee_clk(struct e1000_hw *hw,
*****************************************************************************/
static void
e1000_lower_ee_clk(struct e1000_hw *hw,
- uint32_t *eecd)
+ u32 *eecd)
{
/* Lower the clock input to the EEPROM (by clearing the SK bit), and then
* wait 50 microseconds.
@@ -4666,12 +4667,12 @@ e1000_lower_ee_clk(struct e1000_hw *hw,
*****************************************************************************/
static void
e1000_shift_out_ee_bits(struct e1000_hw *hw,
- uint16_t data,
- uint16_t count)
+ u16 data,
+ u16 count)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd;
- uint32_t mask;
+ u32 eecd;
+ u32 mask;
/* We need to shift "count" bits out to the EEPROM. So, value in the
* "data" parameter will be shifted out to the EEPROM one bit at a time.
@@ -4717,13 +4718,13 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static uint16_t
+static u16
e1000_shift_in_ee_bits(struct e1000_hw *hw,
- uint16_t count)
+ u16 count)
{
- uint32_t eecd;
- uint32_t i;
- uint16_t data;
+ u32 eecd;
+ u32 i;
+ u16 data;
/* In order to read a register from the EEPROM, we need to shift 'count'
* bits in from the EEPROM. Bits are "shifted in" by raising the clock
@@ -4761,11 +4762,11 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw,
* Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
* function should be called before issuing a command to the EEPROM.
*****************************************************************************/
-static int32_t
+static s32
e1000_acquire_eeprom(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd, i=0;
+ u32 eecd, i=0;
DEBUGFUNC("e1000_acquire_eeprom");
@@ -4824,7 +4825,7 @@ static void
e1000_standby_eeprom(struct e1000_hw *hw)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd;
+ u32 eecd;
eecd = E1000_READ_REG(hw, EECD);
@@ -4872,7 +4873,7 @@ e1000_standby_eeprom(struct e1000_hw *hw)
static void
e1000_release_eeprom(struct e1000_hw *hw)
{
- uint32_t eecd;
+ u32 eecd;
DEBUGFUNC("e1000_release_eeprom");
@@ -4920,11 +4921,11 @@ e1000_release_eeprom(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_spi_eeprom_ready(struct e1000_hw *hw)
{
- uint16_t retry_count = 0;
- uint8_t spi_stat_reg;
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
DEBUGFUNC("e1000_spi_eeprom_ready");
@@ -4937,7 +4938,7 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw)
do {
e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
hw->eeprom.opcode_bits);
- spi_stat_reg = (uint8_t)e1000_shift_in_ee_bits(hw, 8);
+ spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
break;
@@ -4966,14 +4967,14 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw)
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-int32_t
+s32
e1000_read_eeprom(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t i = 0;
+ u32 i = 0;
DEBUGFUNC("e1000_read_eeprom");
@@ -4994,15 +4995,14 @@ e1000_read_eeprom(struct e1000_hw *hw,
* directly. In this case, we need to acquire the EEPROM so that
* FW or other port software does not interrupt.
*/
- if (e1000_is_onboard_nvm_eeprom(hw) == TRUE &&
- hw->eeprom.use_eerd == FALSE) {
+ if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) {
/* Prepare the EEPROM for bit-bang reading */
if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
return -E1000_ERR_EEPROM;
}
/* Eerd register EEPROM access requires no eeprom aquire/release */
- if (eeprom->use_eerd == TRUE)
+ if (eeprom->use_eerd)
return e1000_read_eeprom_eerd(hw, offset, words, data);
/* ICH EEPROM access is done via the ICH flash controller */
@@ -5012,8 +5012,8 @@ e1000_read_eeprom(struct e1000_hw *hw,
/* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
* acquired the EEPROM at this point, so any returns should relase it */
if (eeprom->type == e1000_eeprom_spi) {
- uint16_t word_in;
- uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
if (e1000_spi_eeprom_ready(hw)) {
e1000_release_eeprom(hw);
@@ -5028,7 +5028,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
/* Send the READ command (opcode + addr) */
e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)(offset*2), eeprom->address_bits);
+ e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits);
/* Read the data. The address of the eeprom internally increments with
* each byte (spi) being read, saving on the overhead of eeprom setup
@@ -5044,7 +5044,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
/* Send the READ command (opcode + addr) */
e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)(offset + i),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + i),
eeprom->address_bits);
/* Read the data. For microwire, each word requires the overhead
@@ -5068,14 +5068,14 @@ e1000_read_eeprom(struct e1000_hw *hw,
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
+static s32
e1000_read_eeprom_eerd(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
- uint32_t i, eerd = 0;
- int32_t error = 0;
+ u32 i, eerd = 0;
+ s32 error = 0;
for (i = 0; i < words; i++) {
eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
@@ -5102,15 +5102,15 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw,
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
+static s32
e1000_write_eeprom_eewr(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
- uint32_t register_value = 0;
- uint32_t i = 0;
- int32_t error = 0;
+ u32 register_value = 0;
+ u32 i = 0;
+ s32 error = 0;
if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
return -E1000_ERR_SWFW_SYNC;
@@ -5143,12 +5143,12 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
{
- uint32_t attempts = 100000;
- uint32_t i, reg = 0;
- int32_t done = E1000_ERR_EEPROM;
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 done = E1000_ERR_EEPROM;
for (i = 0; i < attempts; i++) {
if (eerd == E1000_EEPROM_POLL_READ)
@@ -5171,15 +5171,15 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
*
* hw - Struct containing variables accessed by shared code
****************************************************************************/
-static boolean_t
+static bool
e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
{
- uint32_t eecd = 0;
+ u32 eecd = 0;
DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
if (hw->mac_type == e1000_ich8lan)
- return FALSE;
+ return false;
if (hw->mac_type == e1000_82573) {
eecd = E1000_READ_REG(hw, EECD);
@@ -5189,10 +5189,10 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
/* If both bits are set, device is Flash type */
if (eecd == 0x03) {
- return FALSE;
+ return false;
}
}
- return TRUE;
+ return true;
}
/******************************************************************************
@@ -5204,16 +5204,15 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
* If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*****************************************************************************/
-int32_t
+s32
e1000_validate_eeprom_checksum(struct e1000_hw *hw)
{
- uint16_t checksum = 0;
- uint16_t i, eeprom_data;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
DEBUGFUNC("e1000_validate_eeprom_checksum");
- if ((hw->mac_type == e1000_82573) &&
- (e1000_is_onboard_nvm_eeprom(hw) == FALSE)) {
+ if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) {
/* Check bit 4 of word 10h. If it is 0, firmware is done updating
* 10h-12h. Checksum may need to be fixed. */
e1000_read_eeprom(hw, 0x10, 1, &eeprom_data);
@@ -5253,7 +5252,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
checksum += eeprom_data;
}
- if (checksum == (uint16_t) EEPROM_SUM)
+ if (checksum == (u16) EEPROM_SUM)
return E1000_SUCCESS;
else {
DEBUGOUT("EEPROM Checksum Invalid\n");
@@ -5269,12 +5268,12 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
* Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
* Writes the difference to word offset 63 of the EEPROM.
*****************************************************************************/
-int32_t
+s32
e1000_update_eeprom_checksum(struct e1000_hw *hw)
{
- uint32_t ctrl_ext;
- uint16_t checksum = 0;
- uint16_t i, eeprom_data;
+ u32 ctrl_ext;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
DEBUGFUNC("e1000_update_eeprom_checksum");
@@ -5285,7 +5284,7 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
}
checksum += eeprom_data;
}
- checksum = (uint16_t) EEPROM_SUM - checksum;
+ checksum = (u16) EEPROM_SUM - checksum;
if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
DEBUGOUT("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
@@ -5314,14 +5313,14 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
* If e1000_update_eeprom_checksum is not called after this function, the
* EEPROM will most likely contain an invalid checksum.
*****************************************************************************/
-int32_t
+s32
e1000_write_eeprom(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- int32_t status = 0;
+ s32 status = 0;
DEBUGFUNC("e1000_write_eeprom");
@@ -5339,7 +5338,7 @@ e1000_write_eeprom(struct e1000_hw *hw,
}
/* 82573 writes only through eewr */
- if (eeprom->use_eewr == TRUE)
+ if (eeprom->use_eewr)
return e1000_write_eeprom_eewr(hw, offset, words, data);
if (eeprom->type == e1000_eeprom_ich8)
@@ -5371,19 +5370,19 @@ e1000_write_eeprom(struct e1000_hw *hw,
* data - pointer to array of 8 bit words to be written to the EEPROM
*
*****************************************************************************/
-static int32_t
+static s32
e1000_write_eeprom_spi(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint16_t widx = 0;
+ u16 widx = 0;
DEBUGFUNC("e1000_write_eeprom_spi");
while (widx < words) {
- uint8_t write_opcode = EEPROM_WRITE_OPCODE_SPI;
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
@@ -5402,14 +5401,14 @@ e1000_write_eeprom_spi(struct e1000_hw *hw,
/* Send the Write command (8-bit opcode + addr) */
e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)((offset + widx)*2),
+ e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2),
eeprom->address_bits);
/* Send the data */
/* Loop to allow for up to whole page write (32 bytes) of eeprom */
while (widx < words) {
- uint16_t word_out = data[widx];
+ u16 word_out = data[widx];
word_out = (word_out >> 8) | (word_out << 8);
e1000_shift_out_ee_bits(hw, word_out, 16);
widx++;
@@ -5437,16 +5436,16 @@ e1000_write_eeprom_spi(struct e1000_hw *hw,
* data - pointer to array of 16 bit words to be written to the EEPROM
*
*****************************************************************************/
-static int32_t
+static s32
e1000_write_eeprom_microwire(struct e1000_hw *hw,
- uint16_t offset,
- uint16_t words,
- uint16_t *data)
+ u16 offset,
+ u16 words,
+ u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
- uint32_t eecd;
- uint16_t words_written = 0;
- uint16_t i = 0;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
DEBUGFUNC("e1000_write_eeprom_microwire");
@@ -5457,9 +5456,9 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
* EEPROM into write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
- (uint16_t)(eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (uint16_t)(eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
/* Prepare the EEPROM */
e1000_standby_eeprom(hw);
@@ -5469,7 +5468,7 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (uint16_t)(offset + words_written),
+ e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
eeprom->address_bits);
/* Send the data */
@@ -5507,9 +5506,9 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
* EEPROM out of write/erase mode.
*/
e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
- (uint16_t)(eeprom->opcode_bits + 2));
+ (u16)(eeprom->opcode_bits + 2));
- e1000_shift_out_ee_bits(hw, 0, (uint16_t)(eeprom->address_bits - 2));
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
return E1000_SUCCESS;
}
@@ -5524,19 +5523,19 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
+static s32
e1000_commit_shadow_ram(struct e1000_hw *hw)
{
- uint32_t attempts = 100000;
- uint32_t eecd = 0;
- uint32_t flop = 0;
- uint32_t i = 0;
- int32_t error = E1000_SUCCESS;
- uint32_t old_bank_offset = 0;
- uint32_t new_bank_offset = 0;
- uint8_t low_byte = 0;
- uint8_t high_byte = 0;
- boolean_t sector_write_failed = FALSE;
+ u32 attempts = 100000;
+ u32 eecd = 0;
+ u32 flop = 0;
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
+ u32 old_bank_offset = 0;
+ u32 new_bank_offset = 0;
+ u8 low_byte = 0;
+ u8 high_byte = 0;
+ bool sector_write_failed = false;
if (hw->mac_type == e1000_82573) {
/* The flop register will be used to determine if flash type is STM */
@@ -5588,24 +5587,24 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
e1000_erase_ich8_4k_segment(hw, 0);
}
- sector_write_failed = FALSE;
+ sector_write_failed = false;
/* Loop for every byte in the shadow RAM,
* which is in units of words. */
for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
/* Determine whether to write the value stored
* in the other NVM bank or a modified value stored
* in the shadow RAM */
- if (hw->eeprom_shadow_ram[i].modified == TRUE) {
- low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word;
+ if (hw->eeprom_shadow_ram[i].modified) {
+ low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word;
udelay(100);
error = e1000_verify_write_ich8_byte(hw,
(i << 1) + new_bank_offset, low_byte);
if (error != E1000_SUCCESS)
- sector_write_failed = TRUE;
+ sector_write_failed = true;
else {
high_byte =
- (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+ (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
udelay(100);
}
} else {
@@ -5616,7 +5615,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
(i << 1) + new_bank_offset, low_byte);
if (error != E1000_SUCCESS)
- sector_write_failed = TRUE;
+ sector_write_failed = true;
else {
e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
&high_byte);
@@ -5624,10 +5623,10 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
}
}
- /* If the write of the low byte was successful, go ahread and
+ /* If the write of the low byte was successful, go ahead and
* write the high byte while checking to make sure that if it
* is the signature byte, then it is handled properly */
- if (sector_write_failed == FALSE) {
+ if (!sector_write_failed) {
/* If the word is 0x13, then make sure the signature bits
* (15:14) are 11b until the commit has completed.
* This will allow us to write 10b which indicates the
@@ -5640,7 +5639,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
error = e1000_verify_write_ich8_byte(hw,
(i << 1) + new_bank_offset + 1, high_byte);
if (error != E1000_SUCCESS)
- sector_write_failed = TRUE;
+ sector_write_failed = true;
} else {
/* If the write failed then break from the loop and
@@ -5651,7 +5650,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
/* Don't bother writing the segment valid bits if sector
* programming failed. */
- if (sector_write_failed == FALSE) {
+ if (!sector_write_failed) {
/* Finally validate the new segment by setting bit 15:14
* to 10b in word 0x13 , this can be done without an
* erase as well since these bits are 11 to start with
@@ -5673,7 +5672,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
/* Clear the now not used entry in the cache */
for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
- hw->eeprom_shadow_ram[i].modified = FALSE;
+ hw->eeprom_shadow_ram[i].modified = false;
hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
}
}
@@ -5688,11 +5687,11 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_read_mac_addr(struct e1000_hw * hw)
{
- uint16_t offset;
- uint16_t eeprom_data, i;
+ u16 offset;
+ u16 eeprom_data, i;
DEBUGFUNC("e1000_read_mac_addr");
@@ -5702,8 +5701,8 @@ e1000_read_mac_addr(struct e1000_hw * hw)
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
- hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF);
- hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8);
+ hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i+1] = (u8) (eeprom_data >> 8);
}
switch (hw->mac_type) {
@@ -5735,8 +5734,8 @@ e1000_read_mac_addr(struct e1000_hw * hw)
static void
e1000_init_rx_addrs(struct e1000_hw *hw)
{
- uint32_t i;
- uint32_t rar_num;
+ u32 i;
+ u32 rar_num;
DEBUGFUNC("e1000_init_rx_addrs");
@@ -5750,7 +5749,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
/* Reserve a spot for the Locally Administered Address to work around
* an 82571 issue in which a reset on one port will reload the MAC on
* the other port. */
- if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
+ if ((hw->mac_type == e1000_82571) && (hw->laa_is_present))
rar_num -= 1;
if (hw->mac_type == e1000_ich8lan)
rar_num = E1000_RAR_ENTRIES_ICH8LAN;
@@ -5771,11 +5770,11 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
* hw - Struct containing variables accessed by shared code
* mc_addr - the multicast address to hash
*****************************************************************************/
-uint32_t
+u32
e1000_hash_mc_addr(struct e1000_hw *hw,
- uint8_t *mc_addr)
+ u8 *mc_addr)
{
- uint32_t hash_value = 0;
+ u32 hash_value = 0;
/* The portion of the address that is used for the hash table is
* determined by the mc_filter_type setting.
@@ -5788,37 +5787,37 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
case 0:
if (hw->mac_type == e1000_ich8lan) {
/* [47:38] i.e. 0x158 for above example address */
- hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2));
+ hash_value = ((mc_addr[4] >> 6) | (((u16) mc_addr[5]) << 2));
} else {
/* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
}
break;
case 1:
if (hw->mac_type == e1000_ich8lan) {
/* [46:37] i.e. 0x2B1 for above example address */
- hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3));
+ hash_value = ((mc_addr[4] >> 5) | (((u16) mc_addr[5]) << 3));
} else {
/* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+ hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
}
break;
case 2:
if (hw->mac_type == e1000_ich8lan) {
/*[45:36] i.e. 0x163 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
} else {
/* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
}
break;
case 3:
if (hw->mac_type == e1000_ich8lan) {
/* [43:34] i.e. 0x18D for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
} else {
/* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
}
break;
}
@@ -5838,11 +5837,11 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
*****************************************************************************/
void
e1000_mta_set(struct e1000_hw *hw,
- uint32_t hash_value)
+ u32 hash_value)
{
- uint32_t hash_bit, hash_reg;
- uint32_t mta;
- uint32_t temp;
+ u32 hash_bit, hash_reg;
+ u32 mta;
+ u32 temp;
/* The MTA is a register array of 128 32-bit registers.
* It is treated like an array of 4096 bits. We want to set
@@ -5887,18 +5886,18 @@ e1000_mta_set(struct e1000_hw *hw,
*****************************************************************************/
void
e1000_rar_set(struct e1000_hw *hw,
- uint8_t *addr,
- uint32_t index)
+ u8 *addr,
+ u32 index)
{
- uint32_t rar_low, rar_high;
+ u32 rar_low, rar_high;
/* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
- rar_low = ((uint32_t) addr[0] |
- ((uint32_t) addr[1] << 8) |
- ((uint32_t) addr[2] << 16) | ((uint32_t) addr[3] << 24));
- rar_high = ((uint32_t) addr[4] | ((uint32_t) addr[5] << 8));
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
/* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
* unit hang.
@@ -5922,7 +5921,7 @@ e1000_rar_set(struct e1000_hw *hw,
case e1000_82571:
case e1000_82572:
case e1000_80003es2lan:
- if (hw->leave_av_bit_off == TRUE)
+ if (hw->leave_av_bit_off)
break;
default:
/* Indicate to hardware the Address is Valid. */
@@ -5945,10 +5944,10 @@ e1000_rar_set(struct e1000_hw *hw,
*****************************************************************************/
void
e1000_write_vfta(struct e1000_hw *hw,
- uint32_t offset,
- uint32_t value)
+ u32 offset,
+ u32 value)
{
- uint32_t temp;
+ u32 temp;
if (hw->mac_type == e1000_ich8lan)
return;
@@ -5973,10 +5972,10 @@ e1000_write_vfta(struct e1000_hw *hw,
static void
e1000_clear_vfta(struct e1000_hw *hw)
{
- uint32_t offset;
- uint32_t vfta_value = 0;
- uint32_t vfta_offset = 0;
- uint32_t vfta_bit_in_reg = 0;
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
if (hw->mac_type == e1000_ich8lan)
return;
@@ -6004,15 +6003,15 @@ e1000_clear_vfta(struct e1000_hw *hw)
}
}
-static int32_t
+static s32
e1000_id_led_init(struct e1000_hw * hw)
{
- uint32_t ledctl;
- const uint32_t ledctl_mask = 0x000000FF;
- const uint32_t ledctl_on = E1000_LEDCTL_MODE_LED_ON;
- const uint32_t ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
- uint16_t eeprom_data, i, temp;
- const uint16_t led_mask = 0x0F;
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
DEBUGFUNC("e1000_id_led_init");
@@ -6087,11 +6086,11 @@ e1000_id_led_init(struct e1000_hw * hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_setup_led(struct e1000_hw *hw)
{
- uint32_t ledctl;
- int32_t ret_val = E1000_SUCCESS;
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
DEBUGFUNC("e1000_setup_led");
@@ -6112,7 +6111,7 @@ e1000_setup_led(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- (uint16_t)(hw->phy_spd_default &
+ (u16)(hw->phy_spd_default &
~IGP01E1000_GMII_SPD));
if (ret_val)
return ret_val;
@@ -6146,11 +6145,11 @@ e1000_setup_led(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_blink_led_start(struct e1000_hw *hw)
{
- int16_t i;
- uint32_t ledctl_blink = 0;
+ s16 i;
+ u32 ledctl_blink = 0;
DEBUGFUNC("e1000_id_led_blink_on");
@@ -6181,10 +6180,10 @@ e1000_blink_led_start(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_cleanup_led(struct e1000_hw *hw)
{
- int32_t ret_val = E1000_SUCCESS;
+ s32 ret_val = E1000_SUCCESS;
DEBUGFUNC("e1000_cleanup_led");
@@ -6223,10 +6222,10 @@ e1000_cleanup_led(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_led_on(struct e1000_hw *hw)
{
- uint32_t ctrl = E1000_READ_REG(hw, CTRL);
+ u32 ctrl = E1000_READ_REG(hw, CTRL);
DEBUGFUNC("e1000_led_on");
@@ -6274,10 +6273,10 @@ e1000_led_on(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-int32_t
+s32
e1000_led_off(struct e1000_hw *hw)
{
- uint32_t ctrl = E1000_READ_REG(hw, CTRL);
+ u32 ctrl = E1000_READ_REG(hw, CTRL);
DEBUGFUNC("e1000_led_off");
@@ -6328,7 +6327,7 @@ e1000_led_off(struct e1000_hw *hw)
static void
e1000_clear_hw_cntrs(struct e1000_hw *hw)
{
- volatile uint32_t temp;
+ volatile u32 temp;
temp = E1000_READ_REG(hw, CRCERRS);
temp = E1000_READ_REG(hw, SYMERRS);
@@ -6425,7 +6424,7 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
* hw - Struct containing variables accessed by shared code
*
* Call this after e1000_init_hw. You may override the IFS defaults by setting
- * hw->ifs_params_forced to TRUE. However, you must initialize hw->
+ * hw->ifs_params_forced to true. However, you must initialize hw->
* current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
* before calling this function.
*****************************************************************************/
@@ -6442,7 +6441,7 @@ e1000_reset_adaptive(struct e1000_hw *hw)
hw->ifs_step_size = IFS_STEP;
hw->ifs_ratio = IFS_RATIO;
}
- hw->in_ifs_mode = FALSE;
+ hw->in_ifs_mode = false;
E1000_WRITE_REG(hw, AIT, 0);
} else {
DEBUGOUT("Not in Adaptive IFS mode!\n");
@@ -6465,7 +6464,7 @@ e1000_update_adaptive(struct e1000_hw *hw)
if (hw->adaptive_ifs) {
if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
if (hw->tx_packet_delta > MIN_NUM_XMITS) {
- hw->in_ifs_mode = TRUE;
+ hw->in_ifs_mode = true;
if (hw->current_ifs_val < hw->ifs_max_val) {
if (hw->current_ifs_val == 0)
hw->current_ifs_val = hw->ifs_min_val;
@@ -6477,7 +6476,7 @@ e1000_update_adaptive(struct e1000_hw *hw)
} else {
if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
hw->current_ifs_val = 0;
- hw->in_ifs_mode = FALSE;
+ hw->in_ifs_mode = false;
E1000_WRITE_REG(hw, AIT, 0);
}
}
@@ -6496,10 +6495,10 @@ e1000_update_adaptive(struct e1000_hw *hw)
void
e1000_tbi_adjust_stats(struct e1000_hw *hw,
struct e1000_hw_stats *stats,
- uint32_t frame_len,
- uint8_t *mac_addr)
+ u32 frame_len,
+ u8 *mac_addr)
{
- uint64_t carry_bit;
+ u64 carry_bit;
/* First adjust the frame length. */
frame_len--;
@@ -6528,7 +6527,7 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw,
* since the test for a multicast frame will test positive on
* a broadcast frame.
*/
- if ((mac_addr[0] == (uint8_t) 0xff) && (mac_addr[1] == (uint8_t) 0xff))
+ if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
/* Broadcast packet */
stats->bprc++;
else if (*mac_addr & 0x01)
@@ -6574,9 +6573,9 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw,
void
e1000_get_bus_info(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t pci_ex_link_status;
- uint32_t status;
+ s32 ret_val;
+ u16 pci_ex_link_status;
+ u32 status;
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -6648,8 +6647,8 @@ e1000_get_bus_info(struct e1000_hw *hw)
*****************************************************************************/
static void
e1000_write_reg_io(struct e1000_hw *hw,
- uint32_t offset,
- uint32_t value)
+ u32 offset,
+ u32 value)
{
unsigned long io_addr = hw->io_base;
unsigned long io_data = hw->io_base + 4;
@@ -6673,15 +6672,15 @@ e1000_write_reg_io(struct e1000_hw *hw,
* register to the minimum and maximum range.
* For IGP phy's, the function calculates the range by the AGC registers.
*****************************************************************************/
-static int32_t
+static s32
e1000_get_cable_length(struct e1000_hw *hw,
- uint16_t *min_length,
- uint16_t *max_length)
+ u16 *min_length,
+ u16 *max_length)
{
- int32_t ret_val;
- uint16_t agc_value = 0;
- uint16_t i, phy_data;
- uint16_t cable_length;
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
DEBUGFUNC("e1000_get_cable_length");
@@ -6752,9 +6751,9 @@ e1000_get_cable_length(struct e1000_hw *hw,
break;
}
} else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
- uint16_t cur_agc_value;
- uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{IGP01E1000_PHY_AGC_A,
IGP01E1000_PHY_AGC_B,
IGP01E1000_PHY_AGC_C,
@@ -6800,9 +6799,9 @@ e1000_get_cable_length(struct e1000_hw *hw,
IGP01E1000_AGC_RANGE;
} else if (hw->phy_type == e1000_phy_igp_2 ||
hw->phy_type == e1000_phy_igp_3) {
- uint16_t cur_agc_index, max_agc_index = 0;
- uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
- uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
{IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
@@ -6864,12 +6863,12 @@ e1000_get_cable_length(struct e1000_hw *hw,
* return 0. If the link speed is 1000 Mbps the polarity status is in the
* IGP01E1000_PHY_PCS_INIT_REG.
*****************************************************************************/
-static int32_t
+static s32
e1000_check_polarity(struct e1000_hw *hw,
e1000_rev_polarity *polarity)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_check_polarity");
@@ -6940,11 +6939,11 @@ e1000_check_polarity(struct e1000_hw *hw,
* Link Health register. In IGP this bit is latched high, so the driver must
* read it immediately after link is established.
*****************************************************************************/
-static int32_t
+static s32
e1000_check_downshift(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_check_downshift");
@@ -6968,7 +6967,7 @@ e1000_check_downshift(struct e1000_hw *hw)
M88E1000_PSSR_DOWNSHIFT_SHIFT;
} else if (hw->phy_type == e1000_phy_ife) {
/* e1000_phy_ife supports 10/100 speed only */
- hw->speed_downgraded = FALSE;
+ hw->speed_downgraded = false;
}
return E1000_SUCCESS;
@@ -6986,18 +6985,18 @@ e1000_check_downshift(struct e1000_hw *hw)
*
****************************************************************************/
-static int32_t
+static s32
e1000_config_dsp_after_link_change(struct e1000_hw *hw,
- boolean_t link_up)
+ bool link_up)
{
- int32_t ret_val;
- uint16_t phy_data, phy_saved_data, speed, duplex, i;
- uint16_t dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{IGP01E1000_PHY_AGC_PARAM_A,
IGP01E1000_PHY_AGC_PARAM_B,
IGP01E1000_PHY_AGC_PARAM_C,
IGP01E1000_PHY_AGC_PARAM_D};
- uint16_t min_length, max_length;
+ u16 min_length, max_length;
DEBUGFUNC("e1000_config_dsp_after_link_change");
@@ -7039,8 +7038,8 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
(min_length < e1000_igp_cable_length_50)) {
- uint16_t ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
- uint32_t idle_errs = 0;
+ u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
/* clear previous idle error counts */
ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
@@ -7174,11 +7173,11 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
****************************************************************************/
-static int32_t
+static s32
e1000_set_phy_mode(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t eeprom_data;
+ s32 ret_val;
+ u16 eeprom_data;
DEBUGFUNC("e1000_set_phy_mode");
@@ -7198,7 +7197,7 @@ e1000_set_phy_mode(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- hw->phy_reset_disable = FALSE;
+ hw->phy_reset_disable = false;
}
}
@@ -7219,13 +7218,13 @@ e1000_set_phy_mode(struct e1000_hw *hw)
*
****************************************************************************/
-static int32_t
+static s32
e1000_set_d3_lplu_state(struct e1000_hw *hw,
- boolean_t active)
+ bool active)
{
- uint32_t phy_ctrl = 0;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_set_d3_lplu_state");
if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
@@ -7349,13 +7348,13 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
*
****************************************************************************/
-static int32_t
+static s32
e1000_set_d0_lplu_state(struct e1000_hw *hw,
- boolean_t active)
+ bool active)
{
- uint32_t phy_ctrl = 0;
- int32_t ret_val;
- uint16_t phy_data;
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
DEBUGFUNC("e1000_set_d0_lplu_state");
if (hw->mac_type <= e1000_82547_rev_2)
@@ -7440,12 +7439,12 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_set_vco_speed(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t default_page = 0;
- uint16_t phy_data;
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
DEBUGFUNC("e1000_set_vco_speed");
@@ -7504,18 +7503,18 @@ e1000_set_vco_speed(struct e1000_hw *hw)
*
* returns: - E1000_SUCCESS .
****************************************************************************/
-static int32_t
-e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
+static s32
+e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer)
{
- uint8_t i;
- uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
- uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH;
+ u8 i;
+ u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ u8 length = E1000_MNG_DHCP_COOKIE_LENGTH;
length = (length >> 2);
offset = (offset >> 2);
for (i = 0; i < length; i++) {
- *((uint32_t *) buffer + i) =
+ *((u32 *) buffer + i) =
E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
}
return E1000_SUCCESS;
@@ -7531,11 +7530,11 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
* timeout
* - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
+static s32
e1000_mng_enable_host_if(struct e1000_hw * hw)
{
- uint32_t hicr;
- uint8_t i;
+ u32 hicr;
+ u8 i;
/* Check that the host interface is enabled. */
hicr = E1000_READ_REG(hw, HICR);
@@ -7565,14 +7564,14 @@ e1000_mng_enable_host_if(struct e1000_hw * hw)
*
* returns - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
-e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
- uint16_t length, uint16_t offset, uint8_t *sum)
+static s32
+e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum)
{
- uint8_t *tmp;
- uint8_t *bufptr = buffer;
- uint32_t data = 0;
- uint16_t remaining, i, j, prev_bytes;
+ u8 *tmp;
+ u8 *bufptr = buffer;
+ u32 data = 0;
+ u16 remaining, i, j, prev_bytes;
/* sum = only sum of the data and it is not checksum */
@@ -7580,14 +7579,14 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
return -E1000_ERR_PARAM;
}
- tmp = (uint8_t *)&data;
+ tmp = (u8 *)&data;
prev_bytes = offset & 0x3;
offset &= 0xFFFC;
offset >>= 2;
if (prev_bytes) {
data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
- for (j = prev_bytes; j < sizeof(uint32_t); j++) {
+ for (j = prev_bytes; j < sizeof(u32); j++) {
*(tmp + j) = *bufptr++;
*sum += *(tmp + j);
}
@@ -7605,7 +7604,7 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
/* The device driver writes the relevant command block into the
* ram area. */
for (i = 0; i < length; i++) {
- for (j = 0; j < sizeof(uint32_t); j++) {
+ for (j = 0; j < sizeof(u32); j++) {
*(tmp + j) = *bufptr++;
*sum += *(tmp + j);
}
@@ -7613,7 +7612,7 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
}
if (remaining) {
- for (j = 0; j < sizeof(uint32_t); j++) {
+ for (j = 0; j < sizeof(u32); j++) {
if (j < remaining)
*(tmp + j) = *bufptr++;
else
@@ -7633,23 +7632,23 @@ e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer,
*
* returns - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
+static s32
e1000_mng_write_cmd_header(struct e1000_hw * hw,
struct e1000_host_mng_command_header * hdr)
{
- uint16_t i;
- uint8_t sum;
- uint8_t *buffer;
+ u16 i;
+ u8 sum;
+ u8 *buffer;
/* Write the whole command header structure which includes sum of
* the buffer */
- uint16_t length = sizeof(struct e1000_host_mng_command_header);
+ u16 length = sizeof(struct e1000_host_mng_command_header);
sum = hdr->checksum;
hdr->checksum = 0;
- buffer = (uint8_t *) hdr;
+ buffer = (u8 *) hdr;
i = length;
while (i--)
sum += buffer[i];
@@ -7659,7 +7658,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
length >>= 2;
/* The device driver writes the relevant command block into the ram area. */
for (i = 0; i < length; i++) {
- E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *) hdr + i));
E1000_WRITE_FLUSH(hw);
}
@@ -7673,10 +7672,10 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
*
* returns - E1000_SUCCESS for success.
****************************************************************************/
-static int32_t
+static s32
e1000_mng_write_commit(struct e1000_hw * hw)
{
- uint32_t hicr;
+ u32 hicr;
hicr = E1000_READ_REG(hw, HICR);
/* Setting this bit tells the ARC that a new command is pending. */
@@ -7689,35 +7688,35 @@ e1000_mng_write_commit(struct e1000_hw * hw)
/*****************************************************************************
* This function checks the mode of the firmware.
*
- * returns - TRUE when the mode is IAMT or FALSE.
+ * returns - true when the mode is IAMT or false.
****************************************************************************/
-boolean_t
+bool
e1000_check_mng_mode(struct e1000_hw *hw)
{
- uint32_t fwsm;
+ u32 fwsm;
fwsm = E1000_READ_REG(hw, FWSM);
if (hw->mac_type == e1000_ich8lan) {
if ((fwsm & E1000_FWSM_MODE_MASK) ==
(E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
- return TRUE;
+ return true;
} else if ((fwsm & E1000_FWSM_MODE_MASK) ==
(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
- return TRUE;
+ return true;
- return FALSE;
+ return false;
}
/*****************************************************************************
* This function writes the dhcp info .
****************************************************************************/
-int32_t
-e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer,
- uint16_t length)
+s32
+e1000_mng_write_dhcp_info(struct e1000_hw * hw, u8 *buffer,
+ u16 length)
{
- int32_t ret_val;
+ s32 ret_val;
struct e1000_host_mng_command_header hdr;
hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
@@ -7745,11 +7744,11 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer,
*
* returns - checksum of buffer contents.
****************************************************************************/
-static uint8_t
-e1000_calculate_mng_checksum(char *buffer, uint32_t length)
+static u8
+e1000_calculate_mng_checksum(char *buffer, u32 length)
{
- uint8_t sum = 0;
- uint32_t i;
+ u8 sum = 0;
+ u32 i;
if (!buffer)
return 0;
@@ -7757,23 +7756,23 @@ e1000_calculate_mng_checksum(char *buffer, uint32_t length)
for (i=0; i < length; i++)
sum += buffer[i];
- return (uint8_t) (0 - sum);
+ return (u8) (0 - sum);
}
/*****************************************************************************
* This function checks whether tx pkt filtering needs to be enabled or not.
*
- * returns - TRUE for packet filtering or FALSE.
+ * returns - true for packet filtering or false.
****************************************************************************/
-boolean_t
+bool
e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
{
/* called in init as well as watchdog timer functions */
- int32_t ret_val, checksum;
- boolean_t tx_filter = FALSE;
+ s32 ret_val, checksum;
+ bool tx_filter = false;
struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
- uint8_t *buffer = (uint8_t *) &(hw->mng_cookie);
+ u8 *buffer = (u8 *) &(hw->mng_cookie);
if (e1000_check_mng_mode(hw)) {
ret_val = e1000_mng_enable_host_if(hw);
@@ -7787,11 +7786,11 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
E1000_MNG_DHCP_COOKIE_LENGTH)) {
if (hdr->status &
E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT)
- tx_filter = TRUE;
+ tx_filter = true;
} else
- tx_filter = TRUE;
+ tx_filter = true;
} else
- tx_filter = TRUE;
+ tx_filter = true;
}
}
@@ -7804,41 +7803,41 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*
- * returns: - TRUE/FALSE
+ * returns: - true/false
*
*****************************************************************************/
-uint32_t
+u32
e1000_enable_mng_pass_thru(struct e1000_hw *hw)
{
- uint32_t manc;
- uint32_t fwsm, factps;
+ u32 manc;
+ u32 fwsm, factps;
if (hw->asf_firmware_present) {
manc = E1000_READ_REG(hw, MANC);
if (!(manc & E1000_MANC_RCV_TCO_EN) ||
!(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
- return FALSE;
- if (e1000_arc_subsystem_valid(hw) == TRUE) {
+ return false;
+ if (e1000_arc_subsystem_valid(hw)) {
fwsm = E1000_READ_REG(hw, FWSM);
factps = E1000_READ_REG(hw, FACTPS);
if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
- return TRUE;
+ return true;
} else
if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
-static int32_t
+static s32
e1000_polarity_reversal_workaround(struct e1000_hw *hw)
{
- int32_t ret_val;
- uint16_t mii_status_reg;
- uint16_t i;
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
/* Polarity reversal workaround for forced 10F/10H links. */
@@ -7930,7 +7929,7 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw)
static void
e1000_set_pci_express_master_disable(struct e1000_hw *hw)
{
- uint32_t ctrl;
+ u32 ctrl;
DEBUGFUNC("e1000_set_pci_express_master_disable");
@@ -7953,10 +7952,10 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw)
* E1000_SUCCESS master requests disabled.
*
******************************************************************************/
-int32_t
+s32
e1000_disable_pciex_master(struct e1000_hw *hw)
{
- int32_t timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
+ s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
DEBUGFUNC("e1000_disable_pciex_master");
@@ -7991,10 +7990,10 @@ e1000_disable_pciex_master(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
******************************************************************************/
-static int32_t
+static s32
e1000_get_auto_rd_done(struct e1000_hw *hw)
{
- int32_t timeout = AUTO_READ_DONE_TIMEOUT;
+ s32 timeout = AUTO_READ_DONE_TIMEOUT;
DEBUGFUNC("e1000_get_auto_rd_done");
@@ -8039,11 +8038,11 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_phy_cfg_done(struct e1000_hw *hw)
{
- int32_t timeout = PHY_CFG_TIMEOUT;
- uint32_t cfg_mask = E1000_EEPROM_CFG_DONE;
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 cfg_mask = E1000_EEPROM_CFG_DONE;
DEBUGFUNC("e1000_get_phy_cfg_done");
@@ -8086,11 +8085,11 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
{
- int32_t timeout;
- uint32_t swsm;
+ s32 timeout;
+ u32 swsm;
DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
@@ -8139,7 +8138,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
static void
e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
{
- uint32_t swsm;
+ u32 swsm;
DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
@@ -8165,11 +8164,11 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_software_semaphore(struct e1000_hw *hw)
{
- int32_t timeout = hw->eeprom.word_size + 1;
- uint32_t swsm;
+ s32 timeout = hw->eeprom.word_size + 1;
+ u32 swsm;
DEBUGFUNC("e1000_get_software_semaphore");
@@ -8204,7 +8203,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw)
static void
e1000_release_software_semaphore(struct e1000_hw *hw)
{
- uint32_t swsm;
+ u32 swsm;
DEBUGFUNC("e1000_release_software_semaphore");
@@ -8229,11 +8228,11 @@ e1000_release_software_semaphore(struct e1000_hw *hw)
* E1000_SUCCESS
*
*****************************************************************************/
-int32_t
+s32
e1000_check_phy_reset_block(struct e1000_hw *hw)
{
- uint32_t manc = 0;
- uint32_t fwsm = 0;
+ u32 manc = 0;
+ u32 fwsm = 0;
if (hw->mac_type == e1000_ich8lan) {
fwsm = E1000_READ_REG(hw, FWSM);
@@ -8247,10 +8246,10 @@ e1000_check_phy_reset_block(struct e1000_hw *hw)
E1000_BLK_PHY_RESET : E1000_SUCCESS;
}
-static uint8_t
+static u8
e1000_arc_subsystem_valid(struct e1000_hw *hw)
{
- uint32_t fwsm;
+ u32 fwsm;
/* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
* may not be provided a DMA clock when no manageability features are
@@ -8264,14 +8263,14 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
case e1000_80003es2lan:
fwsm = E1000_READ_REG(hw, FWSM);
if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
- return TRUE;
+ return true;
break;
case e1000_ich8lan:
- return TRUE;
+ return true;
default:
break;
}
- return FALSE;
+ return false;
}
@@ -8284,10 +8283,10 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
* returns: E1000_SUCCESS
*
*****************************************************************************/
-static int32_t
-e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
+static s32
+e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
{
- uint32_t gcr_reg = 0;
+ u32 gcr_reg = 0;
DEBUGFUNC("e1000_set_pci_ex_no_snoop");
@@ -8304,7 +8303,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
E1000_WRITE_REG(hw, GCR, gcr_reg);
}
if (hw->mac_type == e1000_ich8lan) {
- uint32_t ctrl_ext;
+ u32 ctrl_ext;
E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
@@ -8325,11 +8324,11 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
-static int32_t
+static s32
e1000_get_software_flag(struct e1000_hw *hw)
{
- int32_t timeout = PHY_CFG_TIMEOUT;
- uint32_t extcnf_ctrl;
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 extcnf_ctrl;
DEBUGFUNC("e1000_get_software_flag");
@@ -8367,7 +8366,7 @@ e1000_get_software_flag(struct e1000_hw *hw)
static void
e1000_release_software_flag(struct e1000_hw *hw)
{
- uint32_t extcnf_ctrl;
+ u32 extcnf_ctrl;
DEBUGFUNC("e1000_release_software_flag");
@@ -8389,16 +8388,16 @@ e1000_release_software_flag(struct e1000_hw *hw)
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-static int32_t
-e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
- uint16_t *data)
+static s32
+e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- int32_t error = E1000_SUCCESS;
- uint32_t flash_bank = 0;
- uint32_t act_offset = 0;
- uint32_t bank_offset = 0;
- uint16_t word = 0;
- uint16_t i = 0;
+ s32 error = E1000_SUCCESS;
+ u32 flash_bank = 0;
+ u32 act_offset = 0;
+ u32 bank_offset = 0;
+ u16 word = 0;
+ u16 i = 0;
/* We need to know which is the valid flash bank. In the event
* that we didn't allocate eeprom_shadow_ram, we may not be
@@ -8417,7 +8416,7 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
for (i = 0; i < words; i++) {
if (hw->eeprom_shadow_ram != NULL &&
- hw->eeprom_shadow_ram[offset+i].modified == TRUE) {
+ hw->eeprom_shadow_ram[offset+i].modified) {
data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
} else {
/* The NVM part needs a byte offset, hence * 2 */
@@ -8445,12 +8444,12 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
* words - number of words to write
* data - words to write to the EEPROM
*****************************************************************************/
-static int32_t
-e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
- uint16_t *data)
+static s32
+e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- uint32_t i = 0;
- int32_t error = E1000_SUCCESS;
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
error = e1000_get_software_flag(hw);
if (error != E1000_SUCCESS)
@@ -8466,7 +8465,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
if (hw->eeprom_shadow_ram != NULL) {
for (i = 0; i < words; i++) {
if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
- hw->eeprom_shadow_ram[offset+i].modified = TRUE;
+ hw->eeprom_shadow_ram[offset+i].modified = true;
hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
} else {
error = -E1000_ERR_EEPROM;
@@ -8492,12 +8491,12 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
*
* hw - The pointer to the hw structure
****************************************************************************/
-static int32_t
+static s32
e1000_ich8_cycle_init(struct e1000_hw *hw)
{
union ich8_hws_flash_status hsfsts;
- int32_t error = E1000_ERR_EEPROM;
- int32_t i = 0;
+ s32 error = E1000_ERR_EEPROM;
+ s32 i = 0;
DEBUGFUNC("e1000_ich8_cycle_init");
@@ -8559,13 +8558,13 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
*
* hw - The pointer to the hw structure
****************************************************************************/
-static int32_t
-e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
+static s32
+e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
{
union ich8_hws_flash_ctrl hsflctl;
union ich8_hws_flash_status hsfsts;
- int32_t error = E1000_ERR_EEPROM;
- uint32_t i = 0;
+ s32 error = E1000_ERR_EEPROM;
+ u32 i = 0;
/* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
@@ -8594,16 +8593,16 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
* size - Size of data to read, 1=byte 2=word
* data - Pointer to the word to store the value read.
*****************************************************************************/
-static int32_t
-e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
- uint32_t size, uint16_t* data)
+static s32
+e1000_read_ich8_data(struct e1000_hw *hw, u32 index,
+ u32 size, u16* data)
{
union ich8_hws_flash_status hsfsts;
union ich8_hws_flash_ctrl hsflctl;
- uint32_t flash_linear_address;
- uint32_t flash_data = 0;
- int32_t error = -E1000_ERR_EEPROM;
- int32_t count = 0;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
DEBUGFUNC("e1000_read_ich8_data");
@@ -8641,9 +8640,9 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
if (error == E1000_SUCCESS) {
flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
if (size == 1) {
- *data = (uint8_t)(flash_data & 0x000000FF);
+ *data = (u8)(flash_data & 0x000000FF);
} else if (size == 2) {
- *data = (uint16_t)(flash_data & 0x0000FFFF);
+ *data = (u16)(flash_data & 0x0000FFFF);
}
break;
} else {
@@ -8673,16 +8672,16 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
* size - Size of data to read, 1=byte 2=word
* data - The byte(s) to write to the NVM.
*****************************************************************************/
-static int32_t
-e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
- uint16_t data)
+static s32
+e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 data)
{
union ich8_hws_flash_status hsfsts;
union ich8_hws_flash_ctrl hsflctl;
- uint32_t flash_linear_address;
- uint32_t flash_data = 0;
- int32_t error = -E1000_ERR_EEPROM;
- int32_t count = 0;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
DEBUGFUNC("e1000_write_ich8_data");
@@ -8711,9 +8710,9 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
if (size == 1)
- flash_data = (uint32_t)data & 0x00FF;
+ flash_data = (u32)data & 0x00FF;
else
- flash_data = (uint32_t)data;
+ flash_data = (u32)data;
E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
@@ -8748,15 +8747,15 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
* index - The index of the byte to read.
* data - Pointer to a byte to store the value read.
*****************************************************************************/
-static int32_t
-e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
+static s32
+e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8* data)
{
- int32_t status = E1000_SUCCESS;
- uint16_t word = 0;
+ s32 status = E1000_SUCCESS;
+ u16 word = 0;
status = e1000_read_ich8_data(hw, index, 1, &word);
if (status == E1000_SUCCESS) {
- *data = (uint8_t)word;
+ *data = (u8)word;
}
return status;
@@ -8771,11 +8770,11 @@ e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
* index - The index of the byte to write.
* byte - The byte to write to the NVM.
*****************************************************************************/
-static int32_t
-e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
+static s32
+e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
{
- int32_t error = E1000_SUCCESS;
- int32_t program_retries = 0;
+ s32 error = E1000_SUCCESS;
+ s32 program_retries = 0;
DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index);
@@ -8804,11 +8803,11 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
* index - The index of the byte to read.
* data - The byte to write to the NVM.
*****************************************************************************/
-static int32_t
-e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
+static s32
+e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
{
- int32_t status = E1000_SUCCESS;
- uint16_t word = (uint16_t)data;
+ s32 status = E1000_SUCCESS;
+ u16 word = (u16)data;
status = e1000_write_ich8_data(hw, index, 1, word);
@@ -8822,10 +8821,10 @@ e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
* index - The starting byte index of the word to read.
* data - Pointer to a word to store the value read.
*****************************************************************************/
-static int32_t
-e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
+static s32
+e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
{
- int32_t status = E1000_SUCCESS;
+ s32 status = E1000_SUCCESS;
status = e1000_read_ich8_data(hw, index, 2, data);
return status;
}
@@ -8841,19 +8840,19 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
* amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
* bank size may be 4, 8 or 64 KBytes
*****************************************************************************/
-static int32_t
-e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
+static s32
+e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
{
union ich8_hws_flash_status hsfsts;
union ich8_hws_flash_ctrl hsflctl;
- uint32_t flash_linear_address;
- int32_t count = 0;
- int32_t error = E1000_ERR_EEPROM;
- int32_t iteration;
- int32_t sub_sector_size = 0;
- int32_t bank_size;
- int32_t j = 0;
- int32_t error_flag = 0;
+ u32 flash_linear_address;
+ s32 count = 0;
+ s32 error = E1000_ERR_EEPROM;
+ s32 iteration;
+ s32 sub_sector_size = 0;
+ s32 bank_size;
+ s32 j = 0;
+ s32 error_flag = 0;
hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
@@ -8931,16 +8930,16 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
return error;
}
-static int32_t
+static s32
e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
- uint32_t cnf_base_addr, uint32_t cnf_size)
+ u32 cnf_base_addr, u32 cnf_size)
{
- uint32_t ret_val = E1000_SUCCESS;
- uint16_t word_addr, reg_data, reg_addr;
- uint16_t i;
+ u32 ret_val = E1000_SUCCESS;
+ u16 word_addr, reg_data, reg_addr;
+ u16 i;
/* cnf_base_addr is in DWORD */
- word_addr = (uint16_t)(cnf_base_addr << 1);
+ word_addr = (u16)(cnf_base_addr << 1);
/* cnf_size is returned in size of dwords */
for (i = 0; i < cnf_size; i++) {
@@ -8956,7 +8955,7 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
if (ret_val != E1000_SUCCESS)
return ret_val;
- ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data);
+ ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data);
e1000_release_software_flag(hw);
}
@@ -8973,10 +8972,10 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
*
* hw: Struct containing variables accessed by shared code
*****************************************************************************/
-static int32_t
+static s32
e1000_init_lcd_from_nvm(struct e1000_hw *hw)
{
- uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+ u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
if (hw->phy_type != e1000_phy_igp_3)
return E1000_SUCCESS;
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a6c3c34feb9889a6f8773abce02c08865a8b886d..99fce2c5dd26b21b0b4e6ff7d6a96d10e8e29758 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -100,8 +100,8 @@ typedef enum {
} e1000_fc_type;
struct e1000_shadow_ram {
- uint16_t eeprom_word;
- boolean_t modified;
+ u16 eeprom_word;
+ bool modified;
};
/* PCI bus types */
@@ -263,19 +263,19 @@ struct e1000_phy_info {
};
struct e1000_phy_stats {
- uint32_t idle_errors;
- uint32_t receive_errors;
+ u32 idle_errors;
+ u32 receive_errors;
};
struct e1000_eeprom_info {
e1000_eeprom_type type;
- uint16_t word_size;
- uint16_t opcode_bits;
- uint16_t address_bits;
- uint16_t delay_usec;
- uint16_t page_size;
- boolean_t use_eerd;
- boolean_t use_eewr;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
+ bool use_eerd;
+ bool use_eewr;
};
/* Flex ASF Information */
@@ -308,34 +308,34 @@ typedef enum {
/* Function prototypes */
/* Initialization */
-int32_t e1000_reset_hw(struct e1000_hw *hw);
-int32_t e1000_init_hw(struct e1000_hw *hw);
-int32_t e1000_set_mac_type(struct e1000_hw *hw);
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
void e1000_set_media_type(struct e1000_hw *hw);
/* Link Configuration */
-int32_t e1000_setup_link(struct e1000_hw *hw);
-int32_t e1000_phy_setup_autoneg(struct e1000_hw *hw);
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
void e1000_config_collision_dist(struct e1000_hw *hw);
-int32_t e1000_check_for_link(struct e1000_hw *hw);
-int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t *speed, uint16_t *duplex);
-int32_t e1000_force_mac_fc(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
/* PHY */
-int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data);
-int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
-int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
-int32_t e1000_phy_reset(struct e1000_hw *hw);
-int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_reset(struct e1000_hw *hw);
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
/* EEPROM Functions */
-int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
+s32 e1000_init_eeprom_params(struct e1000_hw *hw);
/* MNG HOST IF functions */
-uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
@@ -354,80 +354,80 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
struct e1000_host_mng_command_header {
- uint8_t command_id;
- uint8_t checksum;
- uint16_t reserved1;
- uint16_t reserved2;
- uint16_t command_length;
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
};
struct e1000_host_mng_command_info {
struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
- uint8_t command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
};
#ifdef __BIG_ENDIAN
struct e1000_host_mng_dhcp_cookie{
- uint32_t signature;
- uint16_t vlan_id;
- uint8_t reserved0;
- uint8_t status;
- uint32_t reserved1;
- uint8_t checksum;
- uint8_t reserved3;
- uint16_t reserved2;
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
};
#else
struct e1000_host_mng_dhcp_cookie{
- uint32_t signature;
- uint8_t status;
- uint8_t reserved0;
- uint16_t vlan_id;
- uint32_t reserved1;
- uint16_t reserved2;
- uint8_t reserved3;
- uint8_t checksum;
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
};
#endif
-int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
- uint16_t length);
-boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
-boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
-int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw);
-int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw);
-int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
-int32_t e1000_read_mac_addr(struct e1000_hw * hw);
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_read_mac_addr(struct e1000_hw * hw);
/* Filters (multicast, vlan, receive) */
-uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr);
-void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value);
-void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index);
-void e1000_write_vfta(struct e1000_hw *hw, uint32_t offset, uint32_t value);
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
+void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
/* LED functions */
-int32_t e1000_setup_led(struct e1000_hw *hw);
-int32_t e1000_cleanup_led(struct e1000_hw *hw);
-int32_t e1000_led_on(struct e1000_hw *hw);
-int32_t e1000_led_off(struct e1000_hw *hw);
-int32_t e1000_blink_led_start(struct e1000_hw *hw);
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_blink_led_start(struct e1000_hw *hw);
/* Adaptive IFS Functions */
/* Everything else */
void e1000_reset_adaptive(struct e1000_hw *hw);
void e1000_update_adaptive(struct e1000_hw *hw);
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, uint32_t frame_len, uint8_t * mac_addr);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr);
void e1000_get_bus_info(struct e1000_hw *hw);
void e1000_pci_set_mwi(struct e1000_hw *hw);
void e1000_pci_clear_mwi(struct e1000_hw *hw);
-int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value);
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
/* Port I/O is only supported on 82544 and newer */
-void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
-int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
-int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
+s32 e1000_disable_pciex_master(struct e1000_hw *hw);
+s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
#define E1000_READ_REG_IO(a, reg) \
@@ -596,8 +596,8 @@ struct e1000_rx_desc {
__le64 buffer_addr; /* Address of the descriptor's data buffer */
__le16 length; /* Length of data DMAed into data buffer */
__le16 csum; /* Packet checksum */
- uint8_t status; /* Descriptor status */
- uint8_t errors; /* Descriptor Errors */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
__le16 special;
};
@@ -718,15 +718,15 @@ struct e1000_tx_desc {
__le32 data;
struct {
__le16 length; /* Data buffer length */
- uint8_t cso; /* Checksum offset */
- uint8_t cmd; /* Descriptor control */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
} flags;
} lower;
union {
__le32 data;
struct {
- uint8_t status; /* Descriptor status */
- uint8_t css; /* Checksum start */
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
__le16 special;
} fields;
} upper;
@@ -759,16 +759,16 @@ struct e1000_context_desc {
union {
__le32 ip_config;
struct {
- uint8_t ipcss; /* IP checksum start */
- uint8_t ipcso; /* IP checksum offset */
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
__le16 ipcse; /* IP checksum end */
} ip_fields;
} lower_setup;
union {
__le32 tcp_config;
struct {
- uint8_t tucss; /* TCP checksum start */
- uint8_t tucso; /* TCP checksum offset */
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
__le16 tucse; /* TCP checksum end */
} tcp_fields;
} upper_setup;
@@ -776,8 +776,8 @@ struct e1000_context_desc {
union {
__le32 data;
struct {
- uint8_t status; /* Descriptor status */
- uint8_t hdr_len; /* Header length */
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
__le16 mss; /* Maximum segment size */
} fields;
} tcp_seg_setup;
@@ -790,15 +790,15 @@ struct e1000_data_desc {
__le32 data;
struct {
__le16 length; /* Data buffer length */
- uint8_t typ_len_ext; /* */
- uint8_t cmd; /* */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
} flags;
} lower;
union {
__le32 data;
struct {
- uint8_t status; /* Descriptor status */
- uint8_t popts; /* Packet Options */
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
__le16 special; /* */
} fields;
} upper;
@@ -825,8 +825,8 @@ struct e1000_rar {
/* IPv4 Address Table Entry */
struct e1000_ipv4_at_entry {
- volatile uint32_t ipv4_addr; /* IP Address (RW) */
- volatile uint32_t reserved;
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
};
/* Four wakeup IP addresses are supported */
@@ -837,25 +837,25 @@ struct e1000_ipv4_at_entry {
/* IPv6 Address Table Entry */
struct e1000_ipv6_at_entry {
- volatile uint8_t ipv6_addr[16];
+ volatile u8 ipv6_addr[16];
};
/* Flexible Filter Length Table Entry */
struct e1000_fflt_entry {
- volatile uint32_t length; /* Flexible Filter Length (RW) */
- volatile uint32_t reserved;
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
};
/* Flexible Filter Mask Table Entry */
struct e1000_ffmt_entry {
- volatile uint32_t mask; /* Flexible Filter Mask (RW) */
- volatile uint32_t reserved;
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
};
/* Flexible Filter Value Table Entry */
struct e1000_ffvt_entry {
- volatile uint32_t value; /* Flexible Filter Value (RW) */
- volatile uint32_t reserved;
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
};
/* Four Flexible Filters are supported */
@@ -1309,89 +1309,89 @@ struct e1000_ffvt_entry {
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
- uint64_t crcerrs;
- uint64_t algnerrc;
- uint64_t symerrs;
- uint64_t rxerrc;
- uint64_t txerrc;
- uint64_t mpc;
- uint64_t scc;
- uint64_t ecol;
- uint64_t mcc;
- uint64_t latecol;
- uint64_t colc;
- uint64_t dc;
- uint64_t tncrs;
- uint64_t sec;
- uint64_t cexterr;
- uint64_t rlec;
- uint64_t xonrxc;
- uint64_t xontxc;
- uint64_t xoffrxc;
- uint64_t xofftxc;
- uint64_t fcruc;
- uint64_t prc64;
- uint64_t prc127;
- uint64_t prc255;
- uint64_t prc511;
- uint64_t prc1023;
- uint64_t prc1522;
- uint64_t gprc;
- uint64_t bprc;
- uint64_t mprc;
- uint64_t gptc;
- uint64_t gorcl;
- uint64_t gorch;
- uint64_t gotcl;
- uint64_t gotch;
- uint64_t rnbc;
- uint64_t ruc;
- uint64_t rfc;
- uint64_t roc;
- uint64_t rlerrc;
- uint64_t rjc;
- uint64_t mgprc;
- uint64_t mgpdc;
- uint64_t mgptc;
- uint64_t torl;
- uint64_t torh;
- uint64_t totl;
- uint64_t toth;
- uint64_t tpr;
- uint64_t tpt;
- uint64_t ptc64;
- uint64_t ptc127;
- uint64_t ptc255;
- uint64_t ptc511;
- uint64_t ptc1023;
- uint64_t ptc1522;
- uint64_t mptc;
- uint64_t bptc;
- uint64_t tsctc;
- uint64_t tsctfc;
- uint64_t iac;
- uint64_t icrxptc;
- uint64_t icrxatc;
- uint64_t ictxptc;
- uint64_t ictxatc;
- uint64_t ictxqec;
- uint64_t ictxqmtc;
- uint64_t icrxdmtc;
- uint64_t icrxoc;
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
};
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
- uint8_t __iomem *hw_addr;
- uint8_t __iomem *flash_address;
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
e1000_mac_type mac_type;
e1000_phy_type phy_type;
- uint32_t phy_init_script;
+ u32 phy_init_script;
e1000_media_type media_type;
void *back;
struct e1000_shadow_ram *eeprom_shadow_ram;
- uint32_t flash_bank_size;
- uint32_t flash_base_addr;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
e1000_fc_type fc;
e1000_bus_speed bus_speed;
e1000_bus_width bus_width;
@@ -1400,75 +1400,75 @@ struct e1000_hw {
e1000_ms_type master_slave;
e1000_ms_type original_master_slave;
e1000_ffe_config ffe_config_state;
- uint32_t asf_firmware_present;
- uint32_t eeprom_semaphore_present;
- uint32_t swfw_sync_present;
- uint32_t swfwhw_semaphore_present;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ u32 swfw_sync_present;
+ u32 swfwhw_semaphore_present;
unsigned long io_base;
- uint32_t phy_id;
- uint32_t phy_revision;
- uint32_t phy_addr;
- uint32_t original_fc;
- uint32_t txcw;
- uint32_t autoneg_failed;
- uint32_t max_frame_size;
- uint32_t min_frame_size;
- uint32_t mc_filter_type;
- uint32_t num_mc_addrs;
- uint32_t collision_delta;
- uint32_t tx_packet_delta;
- uint32_t ledctl_default;
- uint32_t ledctl_mode1;
- uint32_t ledctl_mode2;
- boolean_t tx_pkt_filtering;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
struct e1000_host_mng_dhcp_cookie mng_cookie;
- uint16_t phy_spd_default;
- uint16_t autoneg_advertised;
- uint16_t pci_cmd_word;
- uint16_t fc_high_water;
- uint16_t fc_low_water;
- uint16_t fc_pause_time;
- uint16_t current_ifs_val;
- uint16_t ifs_min_val;
- uint16_t ifs_max_val;
- uint16_t ifs_step_size;
- uint16_t ifs_ratio;
- uint16_t device_id;
- uint16_t vendor_id;
- uint16_t subsystem_id;
- uint16_t subsystem_vendor_id;
- uint8_t revision_id;
- uint8_t autoneg;
- uint8_t mdix;
- uint8_t forced_speed_duplex;
- uint8_t wait_autoneg_complete;
- uint8_t dma_fairness;
- uint8_t mac_addr[NODE_ADDRESS_SIZE];
- uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
- boolean_t disable_polarity_correction;
- boolean_t speed_downgraded;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
e1000_smart_speed smart_speed;
e1000_dsp_config dsp_config_state;
- boolean_t get_link_status;
- boolean_t serdes_link_down;
- boolean_t tbi_compatibility_en;
- boolean_t tbi_compatibility_on;
- boolean_t laa_is_present;
- boolean_t phy_reset_disable;
- boolean_t initialize_hw_bits_disable;
- boolean_t fc_send_xon;
- boolean_t fc_strict_ieee;
- boolean_t report_tx_early;
- boolean_t adaptive_ifs;
- boolean_t ifs_params_forced;
- boolean_t in_ifs_mode;
- boolean_t mng_reg_access_disabled;
- boolean_t leave_av_bit_off;
- boolean_t kmrn_lock_loss_workaround_disabled;
- boolean_t bad_tx_carr_stats_fd;
- boolean_t has_manc2h;
- boolean_t rx_needs_kicking;
- boolean_t has_smbus;
+ bool get_link_status;
+ bool serdes_link_down;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool kmrn_lock_loss_workaround_disabled;
+ bool bad_tx_carr_stats_fd;
+ bool has_manc2h;
+ bool rx_needs_kicking;
+ bool has_smbus;
};
@@ -2165,14 +2165,14 @@ typedef enum {
#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
struct e1000_host_command_header {
- uint8_t command_id;
- uint8_t command_length;
- uint8_t command_options; /* I/F bits for command, status for return */
- uint8_t checksum;
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
};
struct e1000_host_command_info {
struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
- uint8_t command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
};
/* Host SMB register #0 */
@@ -2495,7 +2495,7 @@ struct e1000_host_command_info {
/* Number of milliseconds we wait for PHY configuration done after MAC reset */
#define PHY_CFG_TIMEOUT 100
-#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
+#define E1000_TX_BUFFER_SIZE ((u32)1514)
/* The carrier extension symbol, as received by the NIC. */
#define CARRIER_EXTENSION 0x0F
@@ -2518,11 +2518,11 @@ struct e1000_host_command_info {
* Typical use:
* ...
* if (TBI_ACCEPT) {
- * accept_frame = TRUE;
+ * accept_frame = true;
* e1000_tbi_adjust_stats(adapter, MacAddress);
* frame_length--;
* } else {
- * accept_frame = FALSE;
+ * accept_frame = false;
* }
* ...
*/
@@ -3312,68 +3312,68 @@ struct e1000_host_command_info {
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct ich8_hsfsts {
-#ifdef E1000_BIG_ENDIAN
- uint16_t reserved2 :6;
- uint16_t fldesvalid :1;
- uint16_t flockdn :1;
- uint16_t flcdone :1;
- uint16_t flcerr :1;
- uint16_t dael :1;
- uint16_t berasesz :2;
- uint16_t flcinprog :1;
- uint16_t reserved1 :2;
+#ifdef __BIG_ENDIAN
+ u16 reserved2 :6;
+ u16 fldesvalid :1;
+ u16 flockdn :1;
+ u16 flcdone :1;
+ u16 flcerr :1;
+ u16 dael :1;
+ u16 berasesz :2;
+ u16 flcinprog :1;
+ u16 reserved1 :2;
#else
- uint16_t flcdone :1; /* bit 0 Flash Cycle Done */
- uint16_t flcerr :1; /* bit 1 Flash Cycle Error */
- uint16_t dael :1; /* bit 2 Direct Access error Log */
- uint16_t berasesz :2; /* bit 4:3 Block/Sector Erase Size */
- uint16_t flcinprog :1; /* bit 5 flash SPI cycle in Progress */
- uint16_t reserved1 :2; /* bit 13:6 Reserved */
- uint16_t reserved2 :6; /* bit 13:6 Reserved */
- uint16_t fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- uint16_t flockdn :1; /* bit 15 Flash Configuration Lock-Down */
+ u16 flcdone :1; /* bit 0 Flash Cycle Done */
+ u16 flcerr :1; /* bit 1 Flash Cycle Error */
+ u16 dael :1; /* bit 2 Direct Access error Log */
+ u16 berasesz :2; /* bit 4:3 Block/Sector Erase Size */
+ u16 flcinprog :1; /* bit 5 flash SPI cycle in Progress */
+ u16 reserved1 :2; /* bit 13:6 Reserved */
+ u16 reserved2 :6; /* bit 13:6 Reserved */
+ u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn :1; /* bit 15 Flash Configuration Lock-Down */
#endif
} hsf_status;
- uint16_t regval;
+ u16 regval;
};
/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
struct ich8_hsflctl {
-#ifdef E1000_BIG_ENDIAN
- uint16_t fldbcount :2;
- uint16_t flockdn :6;
- uint16_t flcgo :1;
- uint16_t flcycle :2;
- uint16_t reserved :5;
+#ifdef __BIG_ENDIAN
+ u16 fldbcount :2;
+ u16 flockdn :6;
+ u16 flcgo :1;
+ u16 flcycle :2;
+ u16 reserved :5;
#else
- uint16_t flcgo :1; /* 0 Flash Cycle Go */
- uint16_t flcycle :2; /* 2:1 Flash Cycle */
- uint16_t reserved :5; /* 7:3 Reserved */
- uint16_t fldbcount :2; /* 9:8 Flash Data Byte Count */
- uint16_t flockdn :6; /* 15:10 Reserved */
+ u16 flcgo :1; /* 0 Flash Cycle Go */
+ u16 flcycle :2; /* 2:1 Flash Cycle */
+ u16 reserved :5; /* 7:3 Reserved */
+ u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn :6; /* 15:10 Reserved */
#endif
} hsf_ctrl;
- uint16_t regval;
+ u16 regval;
};
/* ICH8 Flash Region Access Permissions */
union ich8_hws_flash_regacc {
struct ich8_flracc {
-#ifdef E1000_BIG_ENDIAN
- uint32_t gmwag :8;
- uint32_t gmrag :8;
- uint32_t grwa :8;
- uint32_t grra :8;
+#ifdef __BIG_ENDIAN
+ u32 gmwag :8;
+ u32 gmrag :8;
+ u32 grwa :8;
+ u32 grra :8;
#else
- uint32_t grra :8; /* 0:7 GbE region Read Access */
- uint32_t grwa :8; /* 8:15 GbE region Write Access */
- uint32_t gmrag :8; /* 23:16 GbE Master Read Access Grant */
- uint32_t gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ u32 grra :8; /* 0:7 GbE region Read Access */
+ u32 grwa :8; /* 8:15 GbE region Write Access */
+ u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
#endif
} hsf_flregacc;
- uint16_t regval;
+ u16 regval;
};
/* Miscellaneous PHY bit definitions. */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 0991648c53dc2f5bc0c1d5aee568c3a0a007d6e5..59579b1d8843221304a143f638e59d49f2deba1b 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -127,7 +127,7 @@ int e1000_up(struct e1000_adapter *adapter);
void e1000_down(struct e1000_adapter *adapter);
void e1000_reinit_locked(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
@@ -169,21 +169,21 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
static irqreturn_t e1000_intr(int irq, void *data);
static irqreturn_t e1000_intr_msi(int irq, void *data);
-static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
#ifdef CONFIG_E1000_NAPI
static int e1000_clean(struct napi_struct *napi, int budget);
-static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
-static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
#else
-static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
-static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
#endif
static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
@@ -203,8 +203,8 @@ static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
struct sk_buff *skb);
static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
-static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
-static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
@@ -347,7 +347,6 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
static void
e1000_irq_disable(struct e1000_adapter *adapter)
{
- atomic_inc(&adapter->irq_sem);
E1000_WRITE_REG(&adapter->hw, IMC, ~0);
E1000_WRITE_FLUSH(&adapter->hw);
synchronize_irq(adapter->pdev->irq);
@@ -361,18 +360,16 @@ e1000_irq_disable(struct e1000_adapter *adapter)
static void
e1000_irq_enable(struct e1000_adapter *adapter)
{
- if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
- E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
- E1000_WRITE_FLUSH(&adapter->hw);
- }
+ E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH(&adapter->hw);
}
static void
e1000_update_mng_vlan(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- uint16_t vid = adapter->hw.mng_cookie.vlan_id;
- uint16_t old_vid = adapter->mng_vlan_id;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
if (adapter->vlgrp) {
if (!vlan_group_get_device(adapter->vlgrp, vid)) {
if (adapter->hw.mng_cookie.status &
@@ -382,7 +379,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
} else
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
(vid != old_vid) &&
!vlan_group_get_device(adapter->vlgrp, old_vid))
e1000_vlan_rx_kill_vid(netdev, old_vid);
@@ -405,8 +402,8 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
static void
e1000_release_hw_control(struct e1000_adapter *adapter)
{
- uint32_t ctrl_ext;
- uint32_t swsm;
+ u32 ctrl_ext;
+ u32 swsm;
/* Let firmware taken over control of h/w */
switch (adapter->hw.mac_type) {
@@ -442,8 +439,8 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
static void
e1000_get_hw_control(struct e1000_adapter *adapter)
{
- uint32_t ctrl_ext;
- uint32_t swsm;
+ u32 ctrl_ext;
+ u32 swsm;
/* Let firmware know the driver has taken over */
switch (adapter->hw.mac_type) {
@@ -469,7 +466,7 @@ static void
e1000_init_manageability(struct e1000_adapter *adapter)
{
if (adapter->en_mng_pt) {
- uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
+ u32 manc = E1000_READ_REG(&adapter->hw, MANC);
/* disable hardware interception of ARP */
manc &= ~(E1000_MANC_ARP_EN);
@@ -478,7 +475,7 @@ e1000_init_manageability(struct e1000_adapter *adapter)
/* this will probably generate destination unreachable messages
* from the host OS, but the packets will be handled on SMBUS */
if (adapter->hw.has_manc2h) {
- uint32_t manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
+ u32 manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
manc |= E1000_MANC_EN_MNG2HOST;
#define E1000_MNG2HOST_PORT_623 (1 << 5)
@@ -496,7 +493,7 @@ static void
e1000_release_manageability(struct e1000_adapter *adapter)
{
if (adapter->en_mng_pt) {
- uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
+ u32 manc = E1000_READ_REG(&adapter->hw, MANC);
/* re-enable hardware interception of ARP */
manc |= E1000_MANC_ARP_EN;
@@ -569,7 +566,7 @@ int e1000_up(struct e1000_adapter *adapter)
void e1000_power_up_phy(struct e1000_adapter *adapter)
{
- uint16_t mii_reg = 0;
+ u16 mii_reg = 0;
/* Just clear the power down bit to wake the phy back up */
if (adapter->hw.media_type == e1000_media_type_copper) {
@@ -584,13 +581,13 @@ void e1000_power_up_phy(struct e1000_adapter *adapter)
static void e1000_power_down_phy(struct e1000_adapter *adapter)
{
/* Power down the PHY so no link is implied when interface is down *
- * The PHY cannot be powered down if any of the following is TRUE *
+ * The PHY cannot be powered down if any of the following is true *
* (a) WoL is enabled
* (b) AMT is active
* (c) SoL/IDER session is active */
if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.media_type == e1000_media_type_copper) {
- uint16_t mii_reg = 0;
+ u16 mii_reg = 0;
switch (adapter->hw.mac_type) {
case e1000_82540:
@@ -638,7 +635,6 @@ e1000_down(struct e1000_adapter *adapter)
#ifdef CONFIG_E1000_NAPI
napi_disable(&adapter->napi);
- atomic_set(&adapter->irq_sem, 0);
#endif
e1000_irq_disable(adapter);
@@ -671,9 +667,9 @@ e1000_reinit_locked(struct e1000_adapter *adapter)
void
e1000_reset(struct e1000_adapter *adapter)
{
- uint32_t pba = 0, tx_space, min_tx_space, min_rx_space;
- uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
- boolean_t legacy_pba_adjust = FALSE;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
+ bool legacy_pba_adjust = false;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
@@ -687,7 +683,7 @@ e1000_reset(struct e1000_adapter *adapter)
case e1000_82540:
case e1000_82541:
case e1000_82541_rev_2:
- legacy_pba_adjust = TRUE;
+ legacy_pba_adjust = true;
pba = E1000_PBA_48K;
break;
case e1000_82545:
@@ -698,7 +694,7 @@ e1000_reset(struct e1000_adapter *adapter)
break;
case e1000_82547:
case e1000_82547_rev_2:
- legacy_pba_adjust = TRUE;
+ legacy_pba_adjust = true;
pba = E1000_PBA_30K;
break;
case e1000_82571:
@@ -716,7 +712,7 @@ e1000_reset(struct e1000_adapter *adapter)
break;
}
- if (legacy_pba_adjust == TRUE) {
+ if (legacy_pba_adjust) {
if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
pba -= 8; /* allocate more FIFO for Tx */
@@ -819,7 +815,7 @@ e1000_reset(struct e1000_adapter *adapter)
adapter->hw.mac_type <= e1000_82547_rev_2 &&
adapter->hw.autoneg == 1 &&
adapter->hw.autoneg_advertised == ADVERTISE_1000_FULL) {
- uint32_t ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+ u32 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
/* clear phy power management bit if we are in gig only mode,
* which if enabled will attempt negotiation to 100Mb, which
* can cause a loss of link at power off or driver unload */
@@ -836,7 +832,7 @@ e1000_reset(struct e1000_adapter *adapter)
if (!adapter->smart_power_down &&
(adapter->hw.mac_type == e1000_82571 ||
adapter->hw.mac_type == e1000_82572)) {
- uint16_t phy_data = 0;
+ u16 phy_data = 0;
/* speed up time to link by disabling smart power down, ignore
* the return value of this function because there is nothing
* different we would do if it failed */
@@ -930,8 +926,8 @@ e1000_probe(struct pci_dev *pdev,
static int cards_found = 0;
static int global_quad_port_a = 0; /* global ksp3 port a indication */
int i, err, pci_using_dac;
- uint16_t eeprom_data = 0;
- uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
DECLARE_MAC_BUF(mac);
if ((err = pci_enable_device(pdev)))
@@ -1366,15 +1362,15 @@ e1000_sw_init(struct e1000_adapter *adapter)
e1000_set_media_type(hw);
- hw->wait_autoneg_complete = FALSE;
- hw->tbi_compatibility_en = TRUE;
- hw->adaptive_ifs = TRUE;
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
/* Copper options */
if (hw->media_type == e1000_media_type_copper) {
hw->mdix = AUTO_ALL_MODES;
- hw->disable_polarity_correction = FALSE;
+ hw->disable_polarity_correction = false;
hw->master_slave = E1000_MASTER_SLAVE;
}
@@ -1396,7 +1392,6 @@ e1000_sw_init(struct e1000_adapter *adapter)
#endif
/* Explicitly disable IRQ since the NIC can be in any state. */
- atomic_set(&adapter->irq_sem, 0);
e1000_irq_disable(adapter);
spin_lock_init(&adapter->stats_lock);
@@ -1576,7 +1571,7 @@ e1000_close(struct net_device *netdev)
* @start: address of beginning of memory
* @len: length of memory
**/
-static boolean_t
+static bool
e1000_check_64k_bound(struct e1000_adapter *adapter,
void *start, unsigned long len)
{
@@ -1587,10 +1582,10 @@ e1000_check_64k_bound(struct e1000_adapter *adapter,
* write location to cross 64k boundary due to errata 23 */
if (adapter->hw.mac_type == e1000_82545 ||
adapter->hw.mac_type == e1000_82546) {
- return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
+ return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
}
- return TRUE;
+ return true;
}
/**
@@ -1707,10 +1702,10 @@ e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
static void
e1000_configure_tx(struct e1000_adapter *adapter)
{
- uint64_t tdba;
+ u64 tdba;
struct e1000_hw *hw = &adapter->hw;
- uint32_t tdlen, tctl, tipg, tarc;
- uint32_t ipgr1, ipgr2;
+ u32 tdlen, tctl, tipg, tarc;
+ u32 ipgr1, ipgr2;
/* Setup the HW Tx Head and Tail descriptor pointers */
@@ -1952,10 +1947,10 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
static void
e1000_setup_rctl(struct e1000_adapter *adapter)
{
- uint32_t rctl, rfctl;
- uint32_t psrctl = 0;
+ u32 rctl, rfctl;
+ u32 psrctl = 0;
#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
- uint32_t pages = 0;
+ u32 pages = 0;
#endif
rctl = E1000_READ_REG(&adapter->hw, RCTL);
@@ -2070,9 +2065,9 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
static void
e1000_configure_rx(struct e1000_adapter *adapter)
{
- uint64_t rdba;
+ u64 rdba;
struct e1000_hw *hw = &adapter->hw;
- uint32_t rdlen, rctl, rxcsum, ctrl_ext;
+ u32 rdlen, rctl, rxcsum, ctrl_ext;
if (adapter->rx_ps_pages) {
/* this is a 32 byte descriptor */
@@ -2133,7 +2128,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
if (hw->mac_type >= e1000_82543) {
rxcsum = E1000_READ_REG(hw, RXCSUM);
- if (adapter->rx_csum == TRUE) {
+ if (adapter->rx_csum) {
rxcsum |= E1000_RXCSUM_TUOFL;
/* Enable 82571 IPv4 payload checksum for UDP fragments
@@ -2392,7 +2387,7 @@ static void
e1000_enter_82542_rst(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- uint32_t rctl;
+ u32 rctl;
e1000_pci_clear_mwi(&adapter->hw);
@@ -2410,7 +2405,7 @@ static void
e1000_leave_82542_rst(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- uint32_t rctl;
+ u32 rctl;
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~E1000_RCTL_RST;
@@ -2495,8 +2490,8 @@ e1000_set_rx_mode(struct net_device *netdev)
struct e1000_hw *hw = &adapter->hw;
struct dev_addr_list *uc_ptr;
struct dev_addr_list *mc_ptr;
- uint32_t rctl;
- uint32_t hash_value;
+ u32 rctl;
+ u32 hash_value;
int i, rar_entries = E1000_RAR_ENTRIES;
int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
E1000_NUM_MTA_REGISTERS_ICH8LAN :
@@ -2600,7 +2595,7 @@ e1000_82547_tx_fifo_stall(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
struct net_device *netdev = adapter->netdev;
- uint32_t tctl;
+ u32 tctl;
if (atomic_read(&adapter->tx_fifo_stall)) {
if ((E1000_READ_REG(&adapter->hw, TDT) ==
@@ -2642,8 +2637,8 @@ e1000_watchdog(unsigned long data)
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
struct net_device *netdev = adapter->netdev;
struct e1000_tx_ring *txdr = adapter->tx_ring;
- uint32_t link, tctl;
- int32_t ret_val;
+ u32 link, tctl;
+ s32 ret_val;
ret_val = e1000_check_for_link(&adapter->hw);
if ((ret_val == E1000_ERR_PHY) &&
@@ -2668,8 +2663,8 @@ e1000_watchdog(unsigned long data)
if (link) {
if (!netif_carrier_ok(netdev)) {
- uint32_t ctrl;
- boolean_t txb2b = 1;
+ u32 ctrl;
+ bool txb2b = true;
e1000_get_speed_and_duplex(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
@@ -2691,12 +2686,12 @@ e1000_watchdog(unsigned long data)
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
case SPEED_10:
- txb2b = 0;
+ txb2b = false;
netdev->tx_queue_len = 10;
adapter->tx_timeout_factor = 8;
break;
case SPEED_100:
- txb2b = 0;
+ txb2b = false;
netdev->tx_queue_len = 100;
/* maybe add some timeout factor ? */
break;
@@ -2704,8 +2699,8 @@ e1000_watchdog(unsigned long data)
if ((adapter->hw.mac_type == e1000_82571 ||
adapter->hw.mac_type == e1000_82572) &&
- txb2b == 0) {
- uint32_t tarc0;
+ !txb2b) {
+ u32 tarc0;
tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
tarc0 &= ~(1 << 21);
E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
@@ -2747,7 +2742,7 @@ e1000_watchdog(unsigned long data)
/* make sure the receive unit is started */
if (adapter->hw.rx_needs_kicking) {
struct e1000_hw *hw = &adapter->hw;
- uint32_t rctl = E1000_READ_REG(hw, RCTL);
+ u32 rctl = E1000_READ_REG(hw, RCTL);
E1000_WRITE_REG(hw, RCTL, rctl | E1000_RCTL_EN);
}
}
@@ -2802,7 +2797,7 @@ e1000_watchdog(unsigned long data)
E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
/* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = TRUE;
+ adapter->detect_tx_hung = true;
/* With 82571 controllers, LAA may be overwritten due to controller
* reset from the other port. Set the appropriate LAA in RAR[0] */
@@ -2837,7 +2832,7 @@ enum latency_range {
* @bytes: the number of bytes during this measurement interval
**/
static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
- uint16_t itr_setting,
+ u16 itr_setting,
int packets,
int bytes)
{
@@ -2889,8 +2884,8 @@ update_itr_done:
static void e1000_set_itr(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- uint16_t current_itr;
- uint32_t new_itr = adapter->itr;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
if (unlikely(hw->mac_type < e1000_82540))
return;
@@ -2964,9 +2959,9 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
struct e1000_context_desc *context_desc;
struct e1000_buffer *buffer_info;
unsigned int i;
- uint32_t cmd_length = 0;
- uint16_t ipcse = 0, tucse, mss;
- uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
int err;
if (skb_is_gso(skb)) {
@@ -3025,19 +3020,19 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
if (++i == tx_ring->count) i = 0;
tx_ring->next_to_use = i;
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
-static boolean_t
+static bool
e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
struct sk_buff *skb)
{
struct e1000_context_desc *context_desc;
struct e1000_buffer *buffer_info;
unsigned int i;
- uint8_t css;
+ u8 css;
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
css = skb_transport_offset(skb);
@@ -3060,10 +3055,10 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
if (unlikely(++i == tx_ring->count)) i = 0;
tx_ring->next_to_use = i;
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
#define E1000_MAX_TXD_PWR 12
@@ -3182,7 +3177,7 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
{
struct e1000_tx_desc *tx_desc = NULL;
struct e1000_buffer *buffer_info;
- uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
unsigned int i;
if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
@@ -3246,8 +3241,8 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
static int
e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
{
- uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
- uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
@@ -3274,7 +3269,7 @@ static int
e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
{
struct e1000_hw *hw = &adapter->hw;
- uint16_t length, offset;
+ u16 length, offset;
if (vlan_tx_tag_present(skb)) {
if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
( adapter->hw.mng_cookie.status &
@@ -3285,17 +3280,17 @@ e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
struct ethhdr *eth = (struct ethhdr *) skb->data;
if ((htons(ETH_P_IP) == eth->h_proto)) {
const struct iphdr *ip =
- (struct iphdr *)((uint8_t *)skb->data+14);
+ (struct iphdr *)((u8 *)skb->data+14);
if (IPPROTO_UDP == ip->protocol) {
struct udphdr *udp =
- (struct udphdr *)((uint8_t *)ip +
+ (struct udphdr *)((u8 *)ip +
(ip->ihl << 2));
if (ntohs(udp->dest) == 67) {
- offset = (uint8_t *)udp + 8 - skb->data;
+ offset = (u8 *)udp + 8 - skb->data;
length = skb->len - offset;
return e1000_mng_write_dhcp_info(hw,
- (uint8_t *)udp + 8,
+ (u8 *)udp + 8,
length);
}
}
@@ -3375,7 +3370,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
* overrun the FIFO, adjust the max buffer len if mss
* drops. */
if (mss) {
- uint8_t hdr_len;
+ u8 hdr_len;
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
@@ -3562,7 +3557,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- uint16_t eeprom_data = 0;
+ u16 eeprom_data = 0;
if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
@@ -3657,7 +3652,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
unsigned long flags;
- uint16_t phy_tmp;
+ u16 phy_tmp;
#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
@@ -3834,13 +3829,10 @@ e1000_intr_msi(int irq, void *data)
#ifndef CONFIG_E1000_NAPI
int i;
#endif
- uint32_t icr = E1000_READ_REG(hw, ICR);
+ u32 icr = E1000_READ_REG(hw, ICR);
+
+ /* in NAPI mode read ICR disables interrupts using IAM */
-#ifdef CONFIG_E1000_NAPI
- /* read ICR disables interrupts using IAM, so keep up with our
- * enable/disable accounting */
- atomic_inc(&adapter->irq_sem);
-#endif
if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
hw->get_link_status = 1;
/* 80003ES2LAN workaround-- For packet buffer work-around on
@@ -3849,7 +3841,7 @@ e1000_intr_msi(int irq, void *data)
if (netif_carrier_ok(netdev) &&
(adapter->hw.mac_type == e1000_80003es2lan)) {
/* disable receives */
- uint32_t rctl = E1000_READ_REG(hw, RCTL);
+ u32 rctl = E1000_READ_REG(hw, RCTL);
E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
}
/* guard against interrupt when we're going down */
@@ -3896,7 +3888,7 @@ e1000_intr(int irq, void *data)
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
+ u32 rctl, icr = E1000_READ_REG(hw, ICR);
#ifndef CONFIG_E1000_NAPI
int i;
#endif
@@ -3910,12 +3902,8 @@ e1000_intr(int irq, void *data)
!(icr & E1000_ICR_INT_ASSERTED)))
return IRQ_NONE;
- /* Interrupt Auto-Mask...upon reading ICR,
- * interrupts are masked. No need for the
- * IMC write, but it does mean we should
- * account for it ASAP. */
- if (likely(hw->mac_type >= e1000_82571))
- atomic_inc(&adapter->irq_sem);
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write */
#endif
if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
@@ -3939,7 +3927,6 @@ e1000_intr(int irq, void *data)
#ifdef CONFIG_E1000_NAPI
if (unlikely(hw->mac_type < e1000_82571)) {
/* disable interrupts, without the synchronize_irq bit */
- atomic_inc(&adapter->irq_sem);
E1000_WRITE_REG(hw, IMC, ~0);
E1000_WRITE_FLUSH(hw);
}
@@ -3964,10 +3951,8 @@ e1000_intr(int irq, void *data)
* in dead lock. Writing IMC forces 82547 into
* de-assertion state.
*/
- if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
- atomic_inc(&adapter->irq_sem);
+ if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
E1000_WRITE_REG(hw, IMC, ~0);
- }
adapter->total_tx_bytes = 0;
adapter->total_rx_bytes = 0;
@@ -4038,7 +4023,7 @@ e1000_clean(struct napi_struct *napi, int budget)
* @adapter: board private structure
**/
-static boolean_t
+static bool
e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring)
{
@@ -4049,7 +4034,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
#ifdef CONFIG_E1000_NAPI
unsigned int count = 0;
#endif
- boolean_t cleaned = FALSE;
+ bool cleaned = false;
unsigned int total_tx_bytes=0, total_tx_packets=0;
i = tx_ring->next_to_clean;
@@ -4057,7 +4042,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
eop_desc = E1000_TX_DESC(*tx_ring, eop);
while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
- for (cleaned = FALSE; !cleaned; ) {
+ for (cleaned = false; !cleaned; ) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
@@ -4105,7 +4090,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
if (adapter->detect_tx_hung) {
/* Detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i */
- adapter->detect_tx_hung = FALSE;
+ adapter->detect_tx_hung = false;
if (tx_ring->buffer_info[eop].dma &&
time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
(adapter->tx_timeout_factor * HZ))
@@ -4154,11 +4139,11 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
static void
e1000_rx_checksum(struct e1000_adapter *adapter,
- uint32_t status_err, uint32_t csum,
+ u32 status_err, u32 csum,
struct sk_buff *skb)
{
- uint16_t status = (uint16_t)status_err;
- uint8_t errors = (uint8_t)(status_err >> 24);
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
skb->ip_summed = CHECKSUM_NONE;
/* 82543 or newer only */
@@ -4200,7 +4185,7 @@ e1000_rx_checksum(struct e1000_adapter *adapter,
* @adapter: board private structure
**/
-static boolean_t
+static bool
#ifdef CONFIG_E1000_NAPI
e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
@@ -4215,11 +4200,11 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_desc *rx_desc, *next_rxd;
struct e1000_buffer *buffer_info, *next_buffer;
unsigned long flags;
- uint32_t length;
- uint8_t last_byte;
+ u32 length;
+ u8 last_byte;
unsigned int i;
int cleaned_count = 0;
- boolean_t cleaned = FALSE;
+ bool cleaned = false;
unsigned int total_rx_bytes=0, total_rx_packets=0;
i = rx_ring->next_to_clean;
@@ -4247,7 +4232,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
next_buffer = &rx_ring->buffer_info[i];
- cleaned = TRUE;
+ cleaned = true;
cleaned_count++;
pci_unmap_single(pdev,
buffer_info->dma,
@@ -4316,8 +4301,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
/* Receive Checksum Offload */
e1000_rx_checksum(adapter,
- (uint32_t)(status) |
- ((uint32_t)(rx_desc->errors) << 24),
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
le16_to_cpu(rx_desc->csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
@@ -4373,7 +4358,7 @@ next_desc:
* @adapter: board private structure
**/
-static boolean_t
+static bool
#ifdef CONFIG_E1000_NAPI
e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
@@ -4391,9 +4376,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_ps_page_dma *ps_page_dma;
struct sk_buff *skb;
unsigned int i, j;
- uint32_t length, staterr;
+ u32 length, staterr;
int cleaned_count = 0;
- boolean_t cleaned = FALSE;
+ bool cleaned = false;
unsigned int total_rx_bytes=0, total_rx_packets=0;
i = rx_ring->next_to_clean;
@@ -4420,7 +4405,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
next_buffer = &rx_ring->buffer_info[i];
- cleaned = TRUE;
+ cleaned = true;
cleaned_count++;
pci_unmap_single(pdev, buffer_info->dma,
buffer_info->length,
@@ -4774,8 +4759,8 @@ no_buffers:
static void
e1000_smartspeed(struct e1000_adapter *adapter)
{
- uint16_t phy_status;
- uint16_t phy_ctrl;
+ u16 phy_status;
+ u16 phy_ctrl;
if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
!(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
@@ -4854,8 +4839,8 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct mii_ioctl_data *data = if_mii(ifr);
int retval;
- uint16_t mii_reg;
- uint16_t spddplx;
+ u16 mii_reg;
+ u16 spddplx;
unsigned long flags;
if (adapter->hw.media_type != e1000_media_type_copper)
@@ -4974,11 +4959,11 @@ e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
pcix_set_mmrbc(adapter->pdev, mmrbc);
}
-int32_t
-e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
+s32
+e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
{
struct e1000_adapter *adapter = hw->back;
- uint16_t cap_offset;
+ u16 cap_offset;
cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
if (!cap_offset)
@@ -4990,7 +4975,7 @@ e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
}
void
-e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
+e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
{
outl(value, port);
}
@@ -4999,9 +4984,10 @@ static void
e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t ctrl, rctl;
+ u32 ctrl, rctl;
- e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
adapter->vlgrp = grp;
if (grp) {
@@ -5030,7 +5016,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
rctl &= ~E1000_RCTL_VFE;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
if (adapter->mng_vlan_id !=
- (uint16_t)E1000_MNG_VLAN_NONE) {
+ (u16)E1000_MNG_VLAN_NONE) {
e1000_vlan_rx_kill_vid(netdev,
adapter->mng_vlan_id);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
@@ -5038,14 +5024,15 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
}
}
- e1000_irq_enable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
}
static void
-e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
+e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t vfta, index;
+ u32 vfta, index;
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
@@ -5059,14 +5046,16 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
}
static void
-e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
+e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t vfta, index;
+ u32 vfta, index;
- e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
vlan_group_set_device(adapter->vlgrp, vid, NULL);
- e1000_irq_enable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
@@ -5089,7 +5078,7 @@ e1000_restore_vlan(struct e1000_adapter *adapter)
e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
if (adapter->vlgrp) {
- uint16_t vid;
+ u16 vid;
for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
if (!vlan_group_get_device(adapter->vlgrp, vid))
continue;
@@ -5099,7 +5088,7 @@ e1000_restore_vlan(struct e1000_adapter *adapter)
}
int
-e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
+e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
{
adapter->hw.autoneg = 0;
@@ -5140,8 +5129,8 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t ctrl, ctrl_ext, rctl, status;
- uint32_t wufc = adapter->wol;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
#ifdef CONFIG_PM
int retval = 0;
#endif
@@ -5238,7 +5227,7 @@ e1000_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- uint32_t err;
+ u32 err;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index 10af742d8a2080c16676b59dc6ac7081b34f5880..365626d3177e3330c4307a673255977266a880be 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -41,13 +41,6 @@
#include
#include
-typedef enum {
-#undef FALSE
- FALSE = 0,
-#undef TRUE
- TRUE = 1
-} boolean_t;
-
#ifdef DBG
#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 7fe20310eb5f38514ae2affdb7bd00db7de2d35a..01c88664bad30934e11d3c7ad9d4164d8e73bf7e 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -29,6 +29,9 @@
/*
* 82571EB Gigabit Ethernet Controller
* 82571EB Gigabit Ethernet Controller (Fiber)
+ * 82571EB Dual Port Gigabit Mezzanine Adapter
+ * 82571EB Quad Port Gigabit Mezzanine Adapter
+ * 82571PT Gigabit PT Quad Port Server ExpressModule
* 82572EI Gigabit Ethernet Controller (Copper)
* 82572EI Gigabit Ethernet Controller (Fiber)
* 82572EI Gigabit Ethernet Controller
@@ -72,7 +75,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
- if (hw->media_type != e1000_media_type_copper) {
+ if (hw->phy.media_type != e1000_media_type_copper) {
phy->type = e1000_phy_none;
return 0;
}
@@ -150,7 +153,8 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
if (((eecd >> 15) & 0x3) == 0x3) {
nvm->type = e1000_nvm_flash_hw;
nvm->word_size = 2048;
- /* Autonomous Flash update bit must be cleared due
+ /*
+ * Autonomous Flash update bit must be cleared due
* to Flash update issue.
*/
eecd &= ~E1000_EECD_AUPDEN;
@@ -159,13 +163,18 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
}
/* Fall Through */
default:
- nvm->type = e1000_nvm_eeprom_spi;
+ nvm->type = e1000_nvm_eeprom_spi;
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
E1000_EECD_SIZE_EX_SHIFT);
- /* Added to a constant, "size" becomes the left-shift value
+ /*
+ * Added to a constant, "size" becomes the left-shift value
* for setting word_size.
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* EEPROM access above 16k is unsupported */
+ if (size > 14)
+ size = 14;
nvm->word_size = 1 << size;
break;
}
@@ -190,16 +199,16 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
case E1000_DEV_ID_82571EB_FIBER:
case E1000_DEV_ID_82572EI_FIBER:
case E1000_DEV_ID_82571EB_QUAD_FIBER:
- hw->media_type = e1000_media_type_fiber;
+ hw->phy.media_type = e1000_media_type_fiber;
break;
case E1000_DEV_ID_82571EB_SERDES:
case E1000_DEV_ID_82572EI_SERDES:
case E1000_DEV_ID_82571EB_SERDES_DUAL:
case E1000_DEV_ID_82571EB_SERDES_QUAD:
- hw->media_type = e1000_media_type_internal_serdes;
+ hw->phy.media_type = e1000_media_type_internal_serdes;
break;
default:
- hw->media_type = e1000_media_type_copper;
+ hw->phy.media_type = e1000_media_type_copper;
break;
}
@@ -208,25 +217,28 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
/* Set rar entry count */
mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+ mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
/* check for link */
- switch (hw->media_type) {
+ switch (hw->phy.media_type) {
case e1000_media_type_copper:
func->setup_physical_interface = e1000_setup_copper_link_82571;
func->check_for_link = e1000e_check_for_copper_link;
func->get_link_up_info = e1000e_get_speed_and_duplex_copper;
break;
case e1000_media_type_fiber:
- func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571;
+ func->setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
func->check_for_link = e1000e_check_for_fiber_link;
- func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes;
+ func->get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
break;
case e1000_media_type_internal_serdes:
- func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571;
+ func->setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
func->check_for_link = e1000e_check_for_serdes_link;
- func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes;
+ func->get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
break;
default:
return -E1000_ERR_CONFIG;
@@ -236,7 +248,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
return 0;
}
-static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter)
+static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
static int global_quad_port_a; /* global port a indication */
@@ -322,10 +334,12 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
- /* The 82571 firmware may still be configuring the PHY.
+ /*
+ * The 82571 firmware may still be configuring the PHY.
* In this case, we cannot access the PHY until the
* configuration is done. So we explicitly set the
- * PHY ID. */
+ * PHY ID.
+ */
phy->id = IGP01E1000_I_PHY_ID;
break;
case e1000_82573:
@@ -479,8 +493,10 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* If our nvm is an EEPROM, then we're done
- * otherwise, commit the checksum to the flash NVM. */
+ /*
+ * If our nvm is an EEPROM, then we're done
+ * otherwise, commit the checksum to the flash NVM.
+ */
if (hw->nvm.type != e1000_nvm_flash_hw)
return ret_val;
@@ -496,7 +512,8 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
/* Reset the firmware if using STM opcode. */
if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
- /* The enabling of and the actual reset must be done
+ /*
+ * The enabling of and the actual reset must be done
* in two write cycles.
*/
ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
@@ -557,8 +574,10 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
u32 eewr = 0;
s32 ret_val = 0;
- /* A check for invalid values: offset too large, too many words,
- * and not enough words. */
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
(words == 0)) {
hw_dbg(hw, "nvm parameter(s) out of bounds\n");
@@ -645,30 +664,32 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
} else {
data &= ~IGP02E1000_PM_D0_LPLU;
ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
* important. During driver activity we should enable
- * SmartSpeed, so performance is maintained. */
+ * SmartSpeed, so performance is maintained.
+ */
if (phy->smart_speed == e1000_smart_speed_on) {
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
}
@@ -693,7 +714,8 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
s32 ret_val;
u16 i = 0;
- /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
ret_val = e1000e_disable_pcie_master(hw);
@@ -709,8 +731,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
msleep(10);
- /* Must acquire the MDIO ownership before MAC reset.
- * Ownership defaults to firmware after a reset. */
+ /*
+ * Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset.
+ */
if (hw->mac.type == e1000_82573) {
extcnf_ctrl = er32(EXTCNF_CTRL);
extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
@@ -747,7 +771,8 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
/* We don't want to continue accessing MAC registers. */
return ret_val;
- /* Phy configuration from NVM just starts after EECD_AUTO_RD is set.
+ /*
+ * Phy configuration from NVM just starts after EECD_AUTO_RD is set.
* Need to wait for Phy configuration completion before accessing
* NVM and Phy.
*/
@@ -793,7 +818,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
e1000e_clear_vfta(hw);
/* Setup the receive address. */
- /* If, however, a locally administered address was assigned to the
+ /*
+ * If, however, a locally administered address was assigned to the
* 82571, we must reserve a RAR for it to work around an issue where
* resetting one port will reload the MAC on the other port.
*/
@@ -810,19 +836,19 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
ret_val = e1000_setup_link_82571(hw);
/* Set the transmit descriptor write-back policy */
- reg_data = er32(TXDCTL);
+ reg_data = er32(TXDCTL(0));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB |
E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL, reg_data);
+ ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
if (mac->type != e1000_82573) {
- reg_data = er32(TXDCTL1);
+ reg_data = er32(TXDCTL(1));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB |
E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL1, reg_data);
+ ew32(TXDCTL(1), reg_data);
} else {
e1000e_enable_tx_pkt_filtering(hw);
reg_data = er32(GCR);
@@ -830,7 +856,8 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
ew32(GCR, reg_data);
}
- /* Clear all of the statistics registers (clear on read). It is
+ /*
+ * Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
* is no link.
@@ -851,17 +878,17 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
u32 reg;
/* Transmit Descriptor Control 0 */
- reg = er32(TXDCTL);
+ reg = er32(TXDCTL(0));
reg |= (1 << 22);
- ew32(TXDCTL, reg);
+ ew32(TXDCTL(0), reg);
/* Transmit Descriptor Control 1 */
- reg = er32(TXDCTL1);
+ reg = er32(TXDCTL(1));
reg |= (1 << 22);
- ew32(TXDCTL1, reg);
+ ew32(TXDCTL(1), reg);
/* Transmit Arbitration Control 0 */
- reg = er32(TARC0);
+ reg = er32(TARC(0));
reg &= ~(0xF << 27); /* 30:27 */
switch (hw->mac.type) {
case e1000_82571:
@@ -871,10 +898,10 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
default:
break;
}
- ew32(TARC0, reg);
+ ew32(TARC(0), reg);
/* Transmit Arbitration Control 1 */
- reg = er32(TARC1);
+ reg = er32(TARC(1));
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
@@ -884,7 +911,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
reg &= ~(1 << 28);
else
reg |= (1 << 28);
- ew32(TARC1, reg);
+ ew32(TARC(1), reg);
break;
default:
break;
@@ -922,7 +949,8 @@ void e1000e_clear_vfta(struct e1000_hw *hw)
if (hw->mac.type == e1000_82573) {
if (hw->mng_cookie.vlan_id != 0) {
- /* The VFTA is a 4096b bit-field, each identifying
+ /*
+ * The VFTA is a 4096b bit-field, each identifying
* a single VLAN ID. The following operations
* determine which 32b entry (i.e. offset) into the
* array we want to set the VLAN ID (i.e. bit) of
@@ -936,7 +964,8 @@ void e1000e_clear_vfta(struct e1000_hw *hw)
}
}
for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- /* If the offset we want to clear is the same offset of the
+ /*
+ * If the offset we want to clear is the same offset of the
* manageability VLAN ID, then clear all bits except that of
* the manageability unit.
*/
@@ -947,7 +976,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw)
}
/**
- * e1000_mc_addr_list_update_82571 - Update Multicast addresses
+ * e1000_update_mc_addr_list_82571 - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
@@ -959,7 +988,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw)
* The parameter rar_count will usually be hw->mac.rar_entry_count
* unless there are workarounds that change this.
**/
-static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw,
+static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw,
u8 *mc_addr_list,
u32 mc_addr_count,
u32 rar_used_count,
@@ -968,8 +997,8 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw,
if (e1000e_get_laa_state_82571(hw))
rar_count--;
- e1000e_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count,
- rar_used_count, rar_count);
+ e1000e_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count,
+ rar_used_count, rar_count);
}
/**
@@ -984,12 +1013,13 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw,
**/
static s32 e1000_setup_link_82571(struct e1000_hw *hw)
{
- /* 82573 does not have a word in the NVM to determine
+ /*
+ * 82573 does not have a word in the NVM to determine
* the default flow control setting, so we explicitly
* set it to full.
*/
if (hw->mac.type == e1000_82573)
- hw->mac.fc = e1000_fc_full;
+ hw->fc.type = e1000_fc_full;
return e1000e_setup_link(hw);
}
@@ -1050,14 +1080,14 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
- /* If SerDes loopback mode is entered, there is no form
+ /*
+ * If SerDes loopback mode is entered, there is no form
* of reset to take the adapter out of that mode. So we
* have to explicitly take the adapter out of loopback
* mode. This prevents drivers from twiddling their thumbs
* if another tool failed to take it out of loopback mode.
*/
- ew32(SCTL,
- E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
break;
default:
break;
@@ -1124,7 +1154,8 @@ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
/* If workaround is activated... */
if (state)
- /* Hold a copy of the LAA in RAR[14] This is done so that
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
* between the time RAR[0] gets clobbered and the time it
* gets fixed, the actual LAA is in one of the RARs and no
* incoming packets directed to this port are dropped.
@@ -1152,7 +1183,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
if (nvm->type != e1000_nvm_flash_hw)
return 0;
- /* Check bit 4 of word 10h. If it is 0, firmware is done updating
+ /*
+ * Check bit 4 of word 10h. If it is 0, firmware is done updating
* 10h-12h. Checksum may need to be fixed.
*/
ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
@@ -1160,7 +1192,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
return ret_val;
if (!(data & 0x10)) {
- /* Read 0x23 and check bit 15. This bit is a 1
+ /*
+ * Read 0x23 and check bit 15. This bit is a 1
* when the checksum has already been fixed. If
* the checksum is still wrong and this bit is a
* 1, we need to return bad checksum. Otherwise,
@@ -1240,7 +1273,7 @@ static struct e1000_mac_operations e82571_mac_ops = {
/* .get_link_up_info: media type dependent */
.led_on = e1000e_led_on_generic,
.led_off = e1000e_led_off_generic,
- .mc_addr_list_update = e1000_mc_addr_list_update_82571,
+ .update_mc_addr_list = e1000_update_mc_addr_list_82571,
.reset_hw = e1000_reset_hw_82571,
.init_hw = e1000_init_hw_82571,
.setup_link = e1000_setup_link_82571,
@@ -1304,7 +1337,7 @@ struct e1000_info e1000_82571_info = {
| FLAG_TARC_SPEED_MODE_BIT /* errata */
| FLAG_APME_CHECK_PORT_B,
.pba = 38,
- .get_invariants = e1000_get_invariants_82571,
+ .get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_igp,
.nvm_ops = &e82571_nvm_ops,
@@ -1322,7 +1355,7 @@ struct e1000_info e1000_82572_info = {
| FLAG_HAS_STATS_ICR_ICT
| FLAG_TARC_SPEED_MODE_BIT, /* errata */
.pba = 38,
- .get_invariants = e1000_get_invariants_82571,
+ .get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_igp,
.nvm_ops = &e82571_nvm_ops,
@@ -1342,7 +1375,7 @@ struct e1000_info e1000_82573_info = {
| FLAG_HAS_ERT
| FLAG_HAS_SWSM_ON_LOAD,
.pba = 20,
- .get_invariants = e1000_get_invariants_82571,
+ .get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_m88,
.nvm_ops = &e82571_nvm_ops,
diff --git a/drivers/net/e1000e/Makefile b/drivers/net/e1000e/Makefile
index 650f866e7ac2582d1d4916bdae2405fc8a04854f..360c91369f35f7e3bd94818116777ba1c499c2f2 100644
--- a/drivers/net/e1000e/Makefile
+++ b/drivers/net/e1000e/Makefile
@@ -1,7 +1,7 @@
################################################################################
#
# Intel PRO/1000 Linux driver
-# Copyright(c) 1999 - 2007 Intel Corporation.
+# Copyright(c) 1999 - 2008 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index a4f511f549f789c287c6fa06ae68479beb47d372..572cfd44397adcf6ff506b742aebc201b1c325b6 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -120,10 +120,10 @@
#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
-#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
- * filtering */
-#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
- * memory */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+/* Enable MNG packets to host memory */
+#define E1000_MANC_EN_MNG2HOST 0x00200000
/* Receive Control */
#define E1000_RCTL_EN 0x00000002 /* enable */
@@ -135,25 +135,26 @@
#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */
#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
-#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */
#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
-/* Use byte values for the following shift parameters
+/*
+ * Use byte values for the following shift parameters
* Usage:
* psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
* E1000_PSRCTL_BSIZE0_MASK) |
@@ -206,7 +207,8 @@
#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
-/* Bit definitions for the Management Data IO (MDIO) and Management Data
+/*
+ * Bit definitions for the Management Data IO (MDIO) and Management Data
* Clock (MDC) pins in the Device Control Register.
*/
@@ -279,7 +281,7 @@
#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
/* Transmit Control */
-#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_EN 0x00000002 /* enable Tx */
#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
@@ -337,8 +339,8 @@
#define E1000_KABGTXD_BGSQLBIAS 0x00050000
/* PBA constants */
-#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
-#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_8K 0x0008 /* 8KB */
+#define E1000_PBA_16K 0x0010 /* 16KB */
#define E1000_PBS_16K E1000_PBA_16K
@@ -356,12 +358,13 @@
/* Interrupt Cause Read */
#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
-#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-/* This defines the bits that are set in the Interrupt Mask
+/*
+ * This defines the bits that are set in the Interrupt Mask
* Set/Read Register. Each bit is documented below:
* o RXT0 = Receiver Timer Interrupt (ring 0)
* o TXDW = Transmit Descriptor Written Back
@@ -379,21 +382,22 @@
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
/* Interrupt Cause Set */
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
/* Transmit Descriptor Control */
#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
-#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
- still to be processed. */
+/* Enable the counting of desc. still to be processed. */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000
/* Flow Control Constants */
#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
@@ -404,7 +408,8 @@
#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Receive Address */
-/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+/*
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor.
* Technically, we have 16 spots. However, we reserve one of these spots
* (RAR[15]) for our directed address used by controllers with
@@ -533,8 +538,8 @@
#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
-#define E1000_EECD_ADDR_BITS 0x00000400 /* NVM Addressing bits based on type
- * (0-small, 1-large) */
+/* NVM Addressing bits based on type (0-small, 1-large) */
+#define E1000_EECD_ADDR_BITS 0x00000400
#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
@@ -626,7 +631,8 @@
#define MAX_PHY_MULTI_PAGE_REG 0xF
/* Bit definitions for valid PHY IDs. */
-/* I = Integrated
+/*
+ * I = Integrated
* E = External
*/
#define M88E1000_E_PHY_ID 0x01410C50
@@ -653,37 +659,37 @@
#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
/* Manual MDI configuration */
#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
- * 100BASE-TX/10BASE-T:
- * MDI Mode
- */
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
- * all speeds.
- */
- /* 1=Enable Extended 10BASE-T distance
- * (Lower 10BASE-T RX Threshold)
- * 0=Normal 10BASE-T RX Threshold */
- /* 1=5-Bit interface in 100BASE-TX
- * 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/*
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold)
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
/* M88E1000 PHY Specific Status Register */
#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
- * 3=110-140M;4=>140M */
+/* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the master */
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the slave */
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
@@ -692,7 +698,8 @@
#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
-/* Bits...
+/*
+ * Bits...
* 15-5: page
* 4-0: register offset
*/
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 327c0620da310a7815b58836deea5c751256144c..5a89dff522641c5ea28351cb06e99c19e1092a65 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -61,7 +61,7 @@ struct e1000_info;
ndev_printk(KERN_NOTICE , netdev, format, ## arg)
-/* TX/RX descriptor defines */
+/* Tx/Rx descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 4096
#define E1000_MIN_TXD 80
@@ -114,13 +114,13 @@ struct e1000_buffer {
dma_addr_t dma;
struct sk_buff *skb;
union {
- /* TX */
+ /* Tx */
struct {
unsigned long time_stamp;
u16 length;
u16 next_to_watch;
};
- /* RX */
+ /* Rx */
/* arrays of page information for packet split */
struct e1000_ps_page *ps_pages;
};
@@ -167,9 +167,6 @@ struct e1000_adapter {
spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
- /* this is still needed for 82571 and above */
- atomic_t irq_sem;
-
/* track device up/down/testing state */
unsigned long state;
@@ -180,7 +177,7 @@ struct e1000_adapter {
u16 rx_itr;
/*
- * TX
+ * Tx
*/
struct e1000_ring *tx_ring /* One per active queue */
____cacheline_aligned_in_smp;
@@ -202,7 +199,7 @@ struct e1000_adapter {
unsigned int total_rx_bytes;
unsigned int total_rx_packets;
- /* TX stats */
+ /* Tx stats */
u64 tpt_old;
u64 colc_old;
u64 gotcl_old;
@@ -214,7 +211,7 @@ struct e1000_adapter {
u32 tx_dma_failed;
/*
- * RX
+ * Rx
*/
bool (*clean_rx) (struct e1000_adapter *adapter,
int *work_done, int work_to_do)
@@ -226,7 +223,7 @@ struct e1000_adapter {
u32 rx_int_delay;
u32 rx_abs_int_delay;
- /* RX stats */
+ /* Rx stats */
u64 hw_csum_err;
u64 hw_csum_good;
u64 rx_hdr_split;
@@ -237,6 +234,8 @@ struct e1000_adapter {
unsigned int rx_ps_pages;
u16 rx_ps_bsize0;
+ u32 max_frame_size;
+ u32 min_frame_size;
/* OS defined structs */
struct net_device *netdev;
@@ -261,7 +260,7 @@ struct e1000_adapter {
u32 wol;
u32 pba;
- u8 fc_autoneg;
+ bool fc_autoneg;
unsigned long led_status;
@@ -272,7 +271,7 @@ struct e1000_info {
enum e1000_mac_type mac;
unsigned int flags;
u32 pba;
- s32 (*get_invariants)(struct e1000_adapter *);
+ s32 (*get_variants)(struct e1000_adapter *);
struct e1000_mac_operations *mac_ops;
struct e1000_phy_operations *phy_ops;
struct e1000_nvm_operations *nvm_ops;
@@ -308,6 +307,7 @@ struct e1000_info {
#define FLAG_MSI_ENABLED (1 << 27)
#define FLAG_RX_CSUM_ENABLED (1 << 28)
#define FLAG_TSO_FORCE (1 << 29)
+#define FLAG_RX_RESTART_NOW (1 << 30)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -357,7 +357,7 @@ extern struct e1000_info e1000_ich8_info;
extern struct e1000_info e1000_ich9_info;
extern struct e1000_info e1000_es2_info;
-extern s32 e1000e_read_part_num(struct e1000_hw *hw, u32 *part_num);
+extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
extern s32 e1000e_commit_phy(struct e1000_hw *hw);
@@ -390,9 +390,11 @@ extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
extern s32 e1000e_setup_link(struct e1000_hw *hw);
extern void e1000e_clear_vfta(struct e1000_hw *hw);
extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
-extern void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count,
- u32 rar_used_count, u32 rar_count);
+extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+ u8 *mc_addr_list,
+ u32 mc_addr_count,
+ u32 rar_used_count,
+ u32 rar_count);
extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
@@ -462,7 +464,6 @@ extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 88657adf965f29ac11386dea0d9da95a19088bd0..d59a99ae44bee83b6afa7aff45315ae828f9c9b7 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -92,7 +92,8 @@
/* In-Band Control Register (Page 194, Register 18) */
#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
-/* A table for the GG82563 cable length where the range is defined
+/*
+ * A table for the GG82563 cable length where the range is defined
* with a lower bound at "index" and the upper bound at
* "index + 5".
*/
@@ -118,7 +119,7 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
- if (hw->media_type != e1000_media_type_copper) {
+ if (hw->phy.media_type != e1000_media_type_copper) {
phy->type = e1000_phy_none;
return 0;
}
@@ -167,15 +168,20 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
break;
}
- nvm->type = e1000_nvm_eeprom_spi;
+ nvm->type = e1000_nvm_eeprom_spi;
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
E1000_EECD_SIZE_EX_SHIFT);
- /* Added to a constant, "size" becomes the left-shift value
+ /*
+ * Added to a constant, "size" becomes the left-shift value
* for setting word_size.
*/
size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* EEPROM access above 16k is unsupported */
+ if (size > 14)
+ size = 14;
nvm->word_size = 1 << size;
return 0;
@@ -196,10 +202,10 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* Set media type */
switch (adapter->pdev->device) {
case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
- hw->media_type = e1000_media_type_internal_serdes;
+ hw->phy.media_type = e1000_media_type_internal_serdes;
break;
default:
- hw->media_type = e1000_media_type_copper;
+ hw->phy.media_type = e1000_media_type_copper;
break;
}
@@ -208,11 +214,10 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* Set rar entry count */
mac->rar_entry_count = E1000_RAR_ENTRIES;
/* Set if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+ mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
/* check for link */
- switch (hw->media_type) {
+ switch (hw->phy.media_type) {
case e1000_media_type_copper:
func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
func->check_for_link = e1000e_check_for_copper_link;
@@ -233,7 +238,7 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
return 0;
}
-static s32 e1000_get_invariants_80003es2lan(struct e1000_adapter *adapter)
+static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
s32 rc;
@@ -344,8 +349,10 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
if (!(swfw_sync & (fwmask | swmask)))
break;
- /* Firmware currently using resource (fwmask)
- * or other software thread using resource (swmask) */
+ /*
+ * Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
e1000e_put_hw_semaphore(hw);
mdelay(5);
i++;
@@ -407,7 +414,8 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
page_select = GG82563_PHY_PAGE_SELECT;
else
- /* Use Alternative Page Select register to access
+ /*
+ * Use Alternative Page Select register to access
* registers 30 and 31
*/
page_select = GG82563_PHY_PAGE_SELECT_ALT;
@@ -417,7 +425,8 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
if (ret_val)
return ret_val;
- /* The "ready" bit in the MDIC register may be incorrectly set
+ /*
+ * The "ready" bit in the MDIC register may be incorrectly set
* before the device has completed the "Page Select" MDI
* transaction. So we wait 200us after each MDI command...
*/
@@ -462,7 +471,8 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
page_select = GG82563_PHY_PAGE_SELECT;
else
- /* Use Alternative Page Select register to access
+ /*
+ * Use Alternative Page Select register to access
* registers 30 and 31
*/
page_select = GG82563_PHY_PAGE_SELECT_ALT;
@@ -473,7 +483,8 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return ret_val;
- /* The "ready" bit in the MDIC register may be incorrectly set
+ /*
+ * The "ready" bit in the MDIC register may be incorrectly set
* before the device has completed the "Page Select" MDI
* transaction. So we wait 200us after each MDI command...
*/
@@ -554,7 +565,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
u16 phy_data;
bool link;
- /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
* forced whenever speed and duplex are forced.
*/
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
@@ -583,7 +595,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
udelay(1);
- if (hw->phy.wait_for_link) {
+ if (hw->phy.autoneg_wait_to_complete) {
hw_dbg(hw, "Waiting for forced speed/duplex link "
"on GG82563 phy.\n");
@@ -593,7 +605,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
return ret_val;
if (!link) {
- /* We didn't get link.
+ /*
+ * We didn't get link.
* Reset the DSP and cross our fingers.
*/
ret_val = e1000e_phy_reset_dsp(hw);
@@ -612,7 +625,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Resetting the phy means we need to verify the TX_CLK corresponds
+ /*
+ * Resetting the phy means we need to verify the TX_CLK corresponds
* to the link speed. 10Mbps -> 2.5MHz, else 25MHz.
*/
phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
@@ -621,7 +635,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
else
phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25;
- /* In addition, we must re-enable CRS on Tx for both half and full
+ /*
+ * In addition, we must re-enable CRS on Tx for both half and full
* duplex.
*/
phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
@@ -671,7 +686,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
{
s32 ret_val;
- if (hw->media_type == e1000_media_type_copper) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
ret_val = e1000e_get_speed_and_duplex_copper(hw,
speed,
duplex);
@@ -704,7 +719,8 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
u32 icr;
s32 ret_val;
- /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
ret_val = e1000e_disable_pcie_master(hw);
@@ -776,16 +792,16 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
ret_val = e1000e_setup_link(hw);
/* Set the transmit descriptor write-back policy */
- reg_data = er32(TXDCTL);
+ reg_data = er32(TXDCTL(0));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL, reg_data);
+ ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
- reg_data = er32(TXDCTL1);
+ reg_data = er32(TXDCTL(1));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL1, reg_data);
+ ew32(TXDCTL(1), reg_data);
/* Enable retransmit on late collisions */
reg_data = er32(TCTL);
@@ -808,7 +824,8 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
reg_data &= ~0x00100000;
E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data);
- /* Clear all of the statistics registers (clear on read). It is
+ /*
+ * Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
* is no link.
@@ -829,29 +846,29 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
u32 reg;
/* Transmit Descriptor Control 0 */
- reg = er32(TXDCTL);
+ reg = er32(TXDCTL(0));
reg |= (1 << 22);
- ew32(TXDCTL, reg);
+ ew32(TXDCTL(0), reg);
/* Transmit Descriptor Control 1 */
- reg = er32(TXDCTL1);
+ reg = er32(TXDCTL(1));
reg |= (1 << 22);
- ew32(TXDCTL1, reg);
+ ew32(TXDCTL(1), reg);
/* Transmit Arbitration Control 0 */
- reg = er32(TARC0);
+ reg = er32(TARC(0));
reg &= ~(0xF << 27); /* 30:27 */
- if (hw->media_type != e1000_media_type_copper)
+ if (hw->phy.media_type != e1000_media_type_copper)
reg &= ~(1 << 20);
- ew32(TARC0, reg);
+ ew32(TARC(0), reg);
/* Transmit Arbitration Control 1 */
- reg = er32(TARC1);
+ reg = er32(TARC(1));
if (er32(TCTL) & E1000_TCTL_MULR)
reg &= ~(1 << 28);
else
reg |= (1 << 28);
- ew32(TARC1, reg);
+ ew32(TARC(1), reg);
}
/**
@@ -881,7 +898,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Options:
+ /*
+ * Options:
* MDI/MDI-X = 0 (default)
* 0 - Auto for all speeds
* 1 - MDI mode
@@ -907,7 +925,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
break;
}
- /* Options:
+ /*
+ * Options:
* disable_polarity_correction = 0 (default)
* Automatic Correction for Reversed Cable Polarity
* 0 - Disabled
@@ -928,10 +947,9 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
return ret_val;
}
- /* Bypass RX and TX FIFO's */
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
- E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
+ /* Bypass Rx and Tx FIFO's */
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
+ E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
if (ret_val)
return ret_val;
@@ -953,7 +971,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Do not init these registers when the HW is in IAMT mode, since the
+ /*
+ * Do not init these registers when the HW is in IAMT mode, since the
* firmware will have already initialized them. We only initialize
* them if the HW is not in IAMT mode.
*/
@@ -974,7 +993,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
return ret_val;
}
- /* Workaround: Disable padding in Kumeran interface in the MAC
+ /*
+ * Workaround: Disable padding in Kumeran interface in the MAC
* and in the PHY to avoid CRC errors.
*/
ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
@@ -1007,9 +1027,11 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
ew32(CTRL, ctrl);
- /* Set the mac to wait the maximum time between each
+ /*
+ * Set the mac to wait the maximum time between each
* iteration and increase the max iterations when
- * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+ * polling the phy; this fixes erroneous timeouts at 10Mbps.
+ */
ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
if (ret_val)
return ret_val;
@@ -1026,9 +1048,8 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1056,9 +1077,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
u16 reg_data;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1096,9 +1116,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
u32 tipg;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1175,7 +1194,7 @@ static struct e1000_mac_operations es2_mac_ops = {
.get_link_up_info = e1000_get_link_up_info_80003es2lan,
.led_on = e1000e_led_on_generic,
.led_off = e1000e_led_off_generic,
- .mc_addr_list_update = e1000e_mc_addr_list_update_generic,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
.reset_hw = e1000_reset_hw_80003es2lan,
.init_hw = e1000_init_hw_80003es2lan,
.setup_link = e1000e_setup_link,
@@ -1224,7 +1243,7 @@ struct e1000_info e1000_es2_info = {
| FLAG_DISABLE_FC_PAUSE_TIME /* errata */
| FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
.pba = 38,
- .get_invariants = e1000_get_invariants_80003es2lan,
+ .get_variants = e1000_get_variants_80003es2lan,
.mac_ops = &es2_mac_ops,
.phy_ops = &es2_phy_ops,
.nvm_ops = &es2_nvm_ops,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index f77a7427d3a079bf9ad714bf9cfc8f416851fb59..6d1b257bbda6b37d3ea38b1034ef02f20b72f1a3 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -102,7 +102,7 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
"Interrupt test (offline)", "Loopback test (offline)",
"Link test (on/offline)"
};
-#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
static int e1000_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
@@ -111,7 +111,7 @@ static int e1000_get_settings(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
u32 status;
- if (hw->media_type == e1000_media_type_copper) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
@@ -165,7 +165,7 @@ static int e1000_get_settings(struct net_device *netdev,
ecmd->duplex = -1;
}
- ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
return 0;
}
@@ -187,7 +187,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
mac->autoneg = 0;
/* Fiber NICs only allow 1000 gbps Full duplex */
- if ((adapter->hw.media_type == e1000_media_type_fiber) &&
+ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
"configuration\n");
@@ -226,8 +226,10 @@ static int e1000_set_settings(struct net_device *netdev,
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- /* When SoL/IDER sessions are active, autoneg/speed/duplex
- * cannot be changed */
+ /*
+ * When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed
+ */
if (e1000_check_reset_block(hw)) {
ndev_err(netdev, "Cannot change link "
"characteristics when SoL/IDER is active.\n");
@@ -239,7 +241,7 @@ static int e1000_set_settings(struct net_device *netdev,
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
- if (hw->media_type == e1000_media_type_fiber)
+ if (hw->phy.media_type == e1000_media_type_fiber)
hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
@@ -248,6 +250,8 @@ static int e1000_set_settings(struct net_device *netdev,
ADVERTISED_TP |
ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
+ if (adapter->fc_autoneg)
+ hw->fc.original_type = e1000_fc_default;
} else {
if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -277,11 +281,11 @@ static void e1000_get_pauseparam(struct net_device *netdev,
pause->autoneg =
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
- if (hw->mac.fc == e1000_fc_rx_pause) {
+ if (hw->fc.type == e1000_fc_rx_pause) {
pause->rx_pause = 1;
- } else if (hw->mac.fc == e1000_fc_tx_pause) {
+ } else if (hw->fc.type == e1000_fc_tx_pause) {
pause->tx_pause = 1;
- } else if (hw->mac.fc == e1000_fc_full) {
+ } else if (hw->fc.type == e1000_fc_full) {
pause->rx_pause = 1;
pause->tx_pause = 1;
}
@@ -300,18 +304,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
msleep(1);
if (pause->rx_pause && pause->tx_pause)
- hw->mac.fc = e1000_fc_full;
+ hw->fc.type = e1000_fc_full;
else if (pause->rx_pause && !pause->tx_pause)
- hw->mac.fc = e1000_fc_rx_pause;
+ hw->fc.type = e1000_fc_rx_pause;
else if (!pause->rx_pause && pause->tx_pause)
- hw->mac.fc = e1000_fc_tx_pause;
+ hw->fc.type = e1000_fc_tx_pause;
else if (!pause->rx_pause && !pause->tx_pause)
- hw->mac.fc = e1000_fc_none;
+ hw->fc.type = e1000_fc_none;
- hw->mac.original_fc = hw->mac.fc;
+ hw->fc.original_type = hw->fc.type;
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
- hw->mac.fc = e1000_fc_default;
+ hw->fc.type = e1000_fc_default;
if (netif_running(adapter->netdev)) {
e1000e_down(adapter);
e1000e_up(adapter);
@@ -319,7 +323,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
e1000e_reset(adapter);
}
} else {
- retval = ((hw->media_type == e1000_media_type_fiber) ?
+ retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
}
@@ -558,8 +562,10 @@ static int e1000_set_eeprom(struct net_device *netdev,
ret_val = e1000_write_nvm(hw, first_word,
last_word - first_word + 1, eeprom_buff);
- /* Update the checksum over the first part of the EEPROM if needed
- * and flush shadow RAM for 82573 controllers */
+ /*
+ * Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 controllers
+ */
if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
(hw->mac.type == e1000_82573)))
e1000e_update_nvm_checksum(hw);
@@ -578,8 +584,10 @@ static void e1000_get_drvinfo(struct net_device *netdev,
strncpy(drvinfo->driver, e1000e_driver_name, 32);
strncpy(drvinfo->version, e1000e_driver_version, 32);
- /* EEPROM image version # is reported as firmware version # for
- * PCI-E controllers */
+ /*
+ * EEPROM image version # is reported as firmware version # for
+ * PCI-E controllers
+ */
e1000_read_nvm(&adapter->hw, 5, 1, &eeprom_data);
sprintf(firmware_version, "%d.%d-%d",
(eeprom_data & 0xF000) >> 12,
@@ -633,10 +641,17 @@ static int e1000_set_ringparam(struct net_device *netdev,
tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
if (!tx_ring)
goto err_alloc_tx;
+ /*
+ * use a memcpy to save any previously configured
+ * items like napi structs from having to be
+ * reinitialized
+ */
+ memcpy(tx_ring, tx_old, sizeof(struct e1000_ring));
rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
if (!rx_ring)
goto err_alloc_rx;
+ memcpy(rx_ring, rx_old, sizeof(struct e1000_ring));
adapter->tx_ring = tx_ring;
adapter->rx_ring = rx_ring;
@@ -658,8 +673,10 @@ static int e1000_set_ringparam(struct net_device *netdev,
if (err)
goto err_setup_tx;
- /* save the new, restore the old in order to free it,
- * then restore the new back again */
+ /*
+ * restore the old in order to free it,
+ * then add in the new
+ */
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
e1000e_free_rx_resources(adapter);
@@ -690,61 +707,55 @@ err_setup:
return err;
}
-static bool reg_pattern_test_array(struct e1000_adapter *adapter, u64 *data,
- int reg, int offset, u32 mask, u32 write)
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
+ int reg, int offset, u32 mask, u32 write)
{
- int i;
- u32 read;
+ u32 pat, val;
static const u32 test[] =
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
- for (i = 0; i < ARRAY_SIZE(test); i++) {
+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
- (test[i] & write));
- read = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
- if (read != (test[i] & write & mask)) {
+ (test[pat] & write));
+ val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
+ if (val != (test[pat] & write & mask)) {
ndev_err(adapter->netdev, "pattern test reg %04X "
"failed: got 0x%08X expected 0x%08X\n",
reg + offset,
- read, (test[i] & write & mask));
+ val, (test[pat] & write & mask));
*data = reg;
- return true;
+ return 1;
}
}
- return false;
+ return 0;
}
static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
int reg, u32 mask, u32 write)
{
- u32 read;
+ u32 val;
__ew32(&adapter->hw, reg, write & mask);
- read = __er32(&adapter->hw, reg);
- if ((write & mask) != (read & mask)) {
+ val = __er32(&adapter->hw, reg);
+ if ((write & mask) != (val & mask)) {
ndev_err(adapter->netdev, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n", reg, (read & mask),
+ "got 0x%08X expected 0x%08X\n", reg, (val & mask),
(write & mask));
*data = reg;
- return true;
+ return 1;
}
- return false;
+ return 0;
}
-
-#define REG_PATTERN_TEST(R, M, W) \
- do { \
- if (reg_pattern_test_array(adapter, data, R, 0, M, W)) \
- return 1; \
+#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
+ return 1; \
} while (0)
+#define REG_PATTERN_TEST(reg, mask, write) \
+ REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
-#define REG_PATTERN_TEST_ARRAY(R, offset, M, W) \
- do { \
- if (reg_pattern_test_array(adapter, data, R, offset, M, W)) \
- return 1; \
- } while (0)
-
-#define REG_SET_AND_CHECK(R, M, W) \
- do { \
- if (reg_set_and_check(adapter, data, R, M, W)) \
- return 1; \
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
} while (0)
static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
@@ -758,7 +769,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
u32 i;
u32 toggle;
- /* The status register is Read Only, so a write should fail.
+ /*
+ * The status register is Read Only, so a write should fail.
* Some bits that get toggled are ignored.
*/
switch (mac->type) {
@@ -908,7 +920,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
mask = 1 << i;
if (!shared_int) {
- /* Disable the interrupt to be reported in
+ /*
+ * Disable the interrupt to be reported in
* the cause register and then force the same
* interrupt and see if one gets posted. If
* an interrupt was posted to the bus, the
@@ -925,7 +938,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
}
}
- /* Enable the interrupt to be reported in
+ /*
+ * Enable the interrupt to be reported in
* the cause register and then force the same
* interrupt and see if one gets posted. If
* an interrupt was not posted to the bus, the
@@ -942,7 +956,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
}
if (!shared_int) {
- /* Disable the other interrupts to be reported in
+ /*
+ * Disable the other interrupts to be reported in
* the cause register and then force the other
* interrupts and see if any get posted. If
* an interrupt was posted to the bus, the
@@ -1024,7 +1039,6 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
- int size;
int i;
int ret_val;
@@ -1033,13 +1047,13 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
if (!tx_ring->count)
tx_ring->count = E1000_DEFAULT_TXD;
- size = tx_ring->count * sizeof(struct e1000_buffer);
- tx_ring->buffer_info = kmalloc(size, GFP_KERNEL);
- if (!tx_ring->buffer_info) {
+ tx_ring->buffer_info = kcalloc(tx_ring->count,
+ sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!(tx_ring->buffer_info)) {
ret_val = 1;
goto err_nomem;
}
- memset(tx_ring->buffer_info, 0, size);
tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
tx_ring->size = ALIGN(tx_ring->size, 4096);
@@ -1049,21 +1063,17 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 2;
goto err_nomem;
}
- memset(tx_ring->desc, 0, tx_ring->size);
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- ew32(TDBAL,
- ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
ew32(TDBAH, ((u64) tx_ring->dma >> 32));
- ew32(TDLEN,
- tx_ring->count * sizeof(struct e1000_tx_desc));
+ ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc));
ew32(TDH, 0);
ew32(TDT, 0);
- ew32(TCTL,
- E1000_TCTL_PSP | E1000_TCTL_EN |
- E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
- E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
for (i = 0; i < tx_ring->count; i++) {
struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
@@ -1085,12 +1095,11 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 4;
goto err_nomem;
}
- tx_desc->buffer_addr = cpu_to_le64(
- tx_ring->buffer_info[i].dma);
+ tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
tx_desc->lower.data = cpu_to_le32(skb->len);
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
E1000_TXD_CMD_IFCS |
- E1000_TXD_CMD_RPS);
+ E1000_TXD_CMD_RS);
tx_desc->upper.data = 0;
}
@@ -1099,13 +1108,13 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
if (!rx_ring->count)
rx_ring->count = E1000_DEFAULT_RXD;
- size = rx_ring->count * sizeof(struct e1000_buffer);
- rx_ring->buffer_info = kmalloc(size, GFP_KERNEL);
- if (!rx_ring->buffer_info) {
+ rx_ring->buffer_info = kcalloc(rx_ring->count,
+ sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!(rx_ring->buffer_info)) {
ret_val = 5;
goto err_nomem;
}
- memset(rx_ring->buffer_info, 0, size);
rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
@@ -1114,7 +1123,6 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 6;
goto err_nomem;
}
- memset(rx_ring->desc, 0, rx_ring->size);
rx_ring->next_to_use = 0;
rx_ring->next_to_clean = 0;
@@ -1126,6 +1134,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ew32(RDH, 0);
ew32(RDT, 0);
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
(adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
ew32(RCTL, rctl);
@@ -1175,21 +1185,22 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
u32 ctrl_reg = 0;
u32 stat_reg = 0;
- adapter->hw.mac.autoneg = 0;
+ hw->mac.autoneg = 0;
- if (adapter->hw.phy.type == e1000_phy_m88) {
+ if (hw->phy.type == e1000_phy_m88) {
/* Auto-MDI/MDIX Off */
e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
/* reset to update Auto-MDI/MDIX */
e1e_wphy(hw, PHY_CONTROL, 0x9140);
/* autoneg off */
e1e_wphy(hw, PHY_CONTROL, 0x8140);
- } else if (adapter->hw.phy.type == e1000_phy_gg82563)
+ } else if (hw->phy.type == e1000_phy_gg82563)
e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
ctrl_reg = er32(CTRL);
- if (adapter->hw.phy.type == e1000_phy_ife) {
+ switch (hw->phy.type) {
+ case e1000_phy_ife:
/* force 100, set loopback */
e1e_wphy(hw, PHY_CONTROL, 0x6100);
@@ -1199,9 +1210,11 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
E1000_CTRL_SPD_100 |/* Force Speed to 100 */
E1000_CTRL_FD); /* Force Duplex to FULL */
- } else {
+ break;
+ default:
/* force 1000, set loopback */
e1e_wphy(hw, PHY_CONTROL, 0x4140);
+ mdelay(250);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
@@ -1210,14 +1223,20 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if ((adapter->hw.mac.type == e1000_ich8lan) ||
+ (adapter->hw.mac.type == e1000_ich9lan))
+ ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
}
- if (adapter->hw.media_type == e1000_media_type_copper &&
- adapter->hw.phy.type == e1000_phy_m88) {
+ if (hw->phy.media_type == e1000_media_type_copper &&
+ hw->phy.type == e1000_phy_m88) {
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
} else {
- /* Set the ILOS bit on the fiber Nic if half duplex link is
- * detected. */
+ /*
+ * Set the ILOS bit on the fiber Nic if half duplex link is
+ * detected.
+ */
stat_reg = er32(STATUS);
if ((stat_reg & E1000_STATUS_FD) == 0)
ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
@@ -1225,10 +1244,11 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl_reg);
- /* Disable the receiver on the PHY so when a cable is plugged in, the
+ /*
+ * Disable the receiver on the PHY so when a cable is plugged in, the
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
*/
- if (adapter->hw.phy.type == e1000_phy_m88)
+ if (hw->phy.type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
udelay(500);
@@ -1244,8 +1264,10 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
/* special requirements for 82571/82572 fiber adapters */
- /* jump through hoops to make sure link is up because serdes
- * link is hardwired up */
+ /*
+ * jump through hoops to make sure link is up because serdes
+ * link is hardwired up
+ */
ctrl |= E1000_CTRL_SLU;
ew32(CTRL, ctrl);
@@ -1263,8 +1285,10 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl);
}
- /* special write to serdes control register to enable SerDes analog
- * loopback */
+ /*
+ * special write to serdes control register to enable SerDes analog
+ * loopback
+ */
#define E1000_SERDES_LB_ON 0x410
ew32(SCTL, E1000_SERDES_LB_ON);
msleep(10);
@@ -1279,8 +1303,10 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
u32 ctrlext = er32(CTRL_EXT);
u32 ctrl = er32(CTRL);
- /* save CTRL_EXT to restore later, reuse an empty variable (unused
- on mac_type 80003es2lan) */
+ /*
+ * save CTRL_EXT to restore later, reuse an empty variable (unused
+ * on mac_type 80003es2lan)
+ */
adapter->tx_fifo_head = ctrlext;
/* clear the serdes mode bits, putting the device into mac loopback */
@@ -1302,7 +1328,7 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
#define KMRNCTRLSTA_OPMODE (0x1F << 16)
#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
ew32(KMRNCTRLSTA,
- (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
+ (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
return 0;
}
@@ -1312,8 +1338,8 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
switch (hw->mac.type) {
case e1000_80003es2lan:
return e1000_set_es2lan_mac_loopback(adapter);
@@ -1328,7 +1354,7 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
ew32(RCTL, rctl);
return 0;
}
- } else if (hw->media_type == e1000_media_type_copper) {
+ } else if (hw->phy.media_type == e1000_media_type_copper) {
return e1000_integrated_phy_loopback(adapter);
}
@@ -1347,18 +1373,17 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
switch (hw->mac.type) {
case e1000_80003es2lan:
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
/* restore CTRL_EXT, stealing space from tx_fifo_head */
- ew32(CTRL_EXT,
- adapter->tx_fifo_head);
+ ew32(CTRL_EXT, adapter->tx_fifo_head);
adapter->tx_fifo_head = 0;
}
/* fall through */
case e1000_82571:
case e1000_82572:
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
#define E1000_SERDES_LB_OFF 0x400
ew32(SCTL, E1000_SERDES_LB_OFF);
msleep(10);
@@ -1414,7 +1439,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ew32(RDT, rx_ring->count - 1);
- /* Calculate the loop count based on the largest descriptor ring
+ /*
+ * Calculate the loop count based on the largest descriptor ring
* The idea is to wrap the largest ring a number of times using 64
* send/receive pairs during each loop
*/
@@ -1428,8 +1454,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
l = 0;
for (j = 0; j <= lc; j++) { /* loop count loop */
for (i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(
- tx_ring->buffer_info[i].skb, 1024);
+ e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
+ 1024);
pci_dma_sync_single_for_device(pdev,
tx_ring->buffer_info[k].dma,
tx_ring->buffer_info[k].length,
@@ -1454,7 +1480,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
l++;
if (l == rx_ring->count)
l = 0;
- /* time + 20 msecs (200 msecs on 2.4) is more than
+ /*
+ * time + 20 msecs (200 msecs on 2.4) is more than
* enough time to complete the receives, if it's
* exceeded, break and error off
*/
@@ -1463,7 +1490,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ret_val = 13; /* ret_val is the same as mis-compare */
break;
}
- if (jiffies >= (time + 2)) {
+ if (jiffies >= (time + 20)) {
ret_val = 14; /* error code for time out error */
break;
}
@@ -1473,8 +1500,10 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
{
- /* PHY loopback cannot be performed if SoL/IDER
- * sessions are active */
+ /*
+ * PHY loopback cannot be performed if SoL/IDER
+ * sessions are active
+ */
if (e1000_check_reset_block(&adapter->hw)) {
ndev_err(adapter->netdev, "Cannot do PHY loopback test "
"when SoL/IDER is active.\n");
@@ -1504,12 +1533,14 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
struct e1000_hw *hw = &adapter->hw;
*data = 0;
- if (hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
int i = 0;
hw->mac.serdes_has_link = 0;
- /* On some blade server designs, link establishment
- * could take as long as 2-3 minutes */
+ /*
+ * On some blade server designs, link establishment
+ * could take as long as 2-3 minutes
+ */
do {
hw->mac.ops.check_for_link(hw);
if (hw->mac.serdes_has_link)
@@ -1562,8 +1593,10 @@ static void e1000_diag_test(struct net_device *netdev,
ndev_info(netdev, "offline testing starting\n");
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
+ /*
+ * Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1596,9 +1629,9 @@ static void e1000_diag_test(struct net_device *netdev,
adapter->hw.mac.autoneg = autoneg;
/* force this routine to wait until autoneg complete/timeout */
- adapter->hw.phy.wait_for_link = 1;
+ adapter->hw.phy.autoneg_wait_to_complete = 1;
e1000e_reset(adapter);
- adapter->hw.phy.wait_for_link = 0;
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
clear_bit(__E1000_TESTING, &adapter->state);
if (if_running)
@@ -1768,8 +1801,7 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
switch (stringset) {
case ETH_SS_TEST:
- memcpy(data, *e1000_gstrings_test,
- sizeof(e1000_gstrings_test));
+ memcpy(data, *e1000_gstrings_test, sizeof(e1000_gstrings_test));
break;
case ETH_SS_STATS:
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 916025b30fc3cd4dd4af6ea31c0f06bfd27f4077..53f1ac6327fabcd92312ca3d4733c7bb5983f773 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -66,14 +66,14 @@ enum e1e_registers {
E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */
E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */
E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
- E1000_RCTL = 0x00100, /* RX Control - RW */
+ E1000_RCTL = 0x00100, /* Rx Control - RW */
E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
- E1000_TXCW = 0x00178, /* TX Configuration Word - RW */
- E1000_RXCW = 0x00180, /* RX Configuration Word - RO */
- E1000_TCTL = 0x00400, /* TX Control - RW */
- E1000_TCTL_EXT = 0x00404, /* Extended TX Control - RW */
- E1000_TIPG = 0x00410, /* TX Inter-packet gap -RW */
- E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle - RW */
+ E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
+ E1000_RXCW = 0x00180, /* Rx Configuration Word - RO */
+ E1000_TCTL = 0x00400, /* Tx Control - RW */
+ E1000_TCTL_EXT = 0x00404, /* Extended Tx Control - RW */
+ E1000_TIPG = 0x00410, /* Tx Inter-packet gap -RW */
+ E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle -RW */
E1000_LEDCTL = 0x00E00, /* LED Control - RW */
E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */
E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */
@@ -87,12 +87,14 @@ enum e1e_registers {
E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */
E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */
E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */
- E1000_RDBAL = 0x02800, /* RX Descriptor Base Address Low - RW */
- E1000_RDBAH = 0x02804, /* RX Descriptor Base Address High - RW */
- E1000_RDLEN = 0x02808, /* RX Descriptor Length - RW */
- E1000_RDH = 0x02810, /* RX Descriptor Head - RW */
- E1000_RDT = 0x02818, /* RX Descriptor Tail - RW */
- E1000_RDTR = 0x02820, /* RX Delay Timer - RW */
+ E1000_RDBAL = 0x02800, /* Rx Descriptor Base Address Low - RW */
+ E1000_RDBAH = 0x02804, /* Rx Descriptor Base Address High - RW */
+ E1000_RDLEN = 0x02808, /* Rx Descriptor Length - RW */
+ E1000_RDH = 0x02810, /* Rx Descriptor Head - RW */
+ E1000_RDT = 0x02818, /* Rx Descriptor Tail - RW */
+ E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */
+ E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */
+#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8))
E1000_RADV = 0x0282C, /* RX Interrupt Absolute Delay Timer - RW */
/* Convenience macros
@@ -105,17 +107,17 @@ enum e1e_registers {
*/
#define E1000_RDBAL_REG(_n) (E1000_RDBAL + (_n << 8))
E1000_KABGTXD = 0x03004, /* AFE Band Gap Transmit Ref Data */
- E1000_TDBAL = 0x03800, /* TX Descriptor Base Address Low - RW */
- E1000_TDBAH = 0x03804, /* TX Descriptor Base Address High - RW */
- E1000_TDLEN = 0x03808, /* TX Descriptor Length - RW */
- E1000_TDH = 0x03810, /* TX Descriptor Head - RW */
- E1000_TDT = 0x03818, /* TX Descriptor Tail - RW */
- E1000_TIDV = 0x03820, /* TX Interrupt Delay Value - RW */
- E1000_TXDCTL = 0x03828, /* TX Descriptor Control - RW */
- E1000_TADV = 0x0382C, /* TX Interrupt Absolute Delay Val - RW */
- E1000_TARC0 = 0x03840, /* TX Arbitration Count (0) */
- E1000_TXDCTL1 = 0x03928, /* TX Descriptor Control (1) - RW */
- E1000_TARC1 = 0x03940, /* TX Arbitration Count (1) */
+ E1000_TDBAL = 0x03800, /* Tx Descriptor Base Address Low - RW */
+ E1000_TDBAH = 0x03804, /* Tx Descriptor Base Address High - RW */
+ E1000_TDLEN = 0x03808, /* Tx Descriptor Length - RW */
+ E1000_TDH = 0x03810, /* Tx Descriptor Head - RW */
+ E1000_TDT = 0x03818, /* Tx Descriptor Tail - RW */
+ E1000_TIDV = 0x03820, /* Tx Interrupt Delay Value - RW */
+ E1000_TXDCTL_BASE = 0x03828, /* Tx Descriptor Control - RW */
+#define E1000_TXDCTL(_n) (E1000_TXDCTL_BASE + (_n << 8))
+ E1000_TADV = 0x0382C, /* Tx Interrupt Absolute Delay Val - RW */
+ E1000_TARC_BASE = 0x03840, /* Tx Arbitration Count (0) */
+#define E1000_TARC(_n) (E1000_TARC_BASE + (_n << 8))
E1000_CRCERRS = 0x04000, /* CRC Error Count - R/clr */
E1000_ALGNERRC = 0x04004, /* Alignment Error Count - R/clr */
E1000_SYMERRS = 0x04008, /* Symbol Error Count - R/clr */
@@ -127,53 +129,53 @@ enum e1e_registers {
E1000_LATECOL = 0x04020, /* Late Collision Count - R/clr */
E1000_COLC = 0x04028, /* Collision Count - R/clr */
E1000_DC = 0x04030, /* Defer Count - R/clr */
- E1000_TNCRS = 0x04034, /* TX-No CRS - R/clr */
+ E1000_TNCRS = 0x04034, /* Tx-No CRS - R/clr */
E1000_SEC = 0x04038, /* Sequence Error Count - R/clr */
E1000_CEXTERR = 0x0403C, /* Carrier Extension Error Count - R/clr */
E1000_RLEC = 0x04040, /* Receive Length Error Count - R/clr */
- E1000_XONRXC = 0x04048, /* XON RX Count - R/clr */
- E1000_XONTXC = 0x0404C, /* XON TX Count - R/clr */
- E1000_XOFFRXC = 0x04050, /* XOFF RX Count - R/clr */
- E1000_XOFFTXC = 0x04054, /* XOFF TX Count - R/clr */
- E1000_FCRUC = 0x04058, /* Flow Control RX Unsupported Count- R/clr */
- E1000_PRC64 = 0x0405C, /* Packets RX (64 bytes) - R/clr */
- E1000_PRC127 = 0x04060, /* Packets RX (65-127 bytes) - R/clr */
- E1000_PRC255 = 0x04064, /* Packets RX (128-255 bytes) - R/clr */
- E1000_PRC511 = 0x04068, /* Packets RX (255-511 bytes) - R/clr */
- E1000_PRC1023 = 0x0406C, /* Packets RX (512-1023 bytes) - R/clr */
- E1000_PRC1522 = 0x04070, /* Packets RX (1024-1522 bytes) - R/clr */
- E1000_GPRC = 0x04074, /* Good Packets RX Count - R/clr */
- E1000_BPRC = 0x04078, /* Broadcast Packets RX Count - R/clr */
- E1000_MPRC = 0x0407C, /* Multicast Packets RX Count - R/clr */
- E1000_GPTC = 0x04080, /* Good Packets TX Count - R/clr */
- E1000_GORCL = 0x04088, /* Good Octets RX Count Low - R/clr */
- E1000_GORCH = 0x0408C, /* Good Octets RX Count High - R/clr */
- E1000_GOTCL = 0x04090, /* Good Octets TX Count Low - R/clr */
- E1000_GOTCH = 0x04094, /* Good Octets TX Count High - R/clr */
- E1000_RNBC = 0x040A0, /* RX No Buffers Count - R/clr */
- E1000_RUC = 0x040A4, /* RX Undersize Count - R/clr */
- E1000_RFC = 0x040A8, /* RX Fragment Count - R/clr */
- E1000_ROC = 0x040AC, /* RX Oversize Count - R/clr */
- E1000_RJC = 0x040B0, /* RX Jabber Count - R/clr */
- E1000_MGTPRC = 0x040B4, /* Management Packets RX Count - R/clr */
+ E1000_XONRXC = 0x04048, /* XON Rx Count - R/clr */
+ E1000_XONTXC = 0x0404C, /* XON Tx Count - R/clr */
+ E1000_XOFFRXC = 0x04050, /* XOFF Rx Count - R/clr */
+ E1000_XOFFTXC = 0x04054, /* XOFF Tx Count - R/clr */
+ E1000_FCRUC = 0x04058, /* Flow Control Rx Unsupported Count- R/clr */
+ E1000_PRC64 = 0x0405C, /* Packets Rx (64 bytes) - R/clr */
+ E1000_PRC127 = 0x04060, /* Packets Rx (65-127 bytes) - R/clr */
+ E1000_PRC255 = 0x04064, /* Packets Rx (128-255 bytes) - R/clr */
+ E1000_PRC511 = 0x04068, /* Packets Rx (255-511 bytes) - R/clr */
+ E1000_PRC1023 = 0x0406C, /* Packets Rx (512-1023 bytes) - R/clr */
+ E1000_PRC1522 = 0x04070, /* Packets Rx (1024-1522 bytes) - R/clr */
+ E1000_GPRC = 0x04074, /* Good Packets Rx Count - R/clr */
+ E1000_BPRC = 0x04078, /* Broadcast Packets Rx Count - R/clr */
+ E1000_MPRC = 0x0407C, /* Multicast Packets Rx Count - R/clr */
+ E1000_GPTC = 0x04080, /* Good Packets Tx Count - R/clr */
+ E1000_GORCL = 0x04088, /* Good Octets Rx Count Low - R/clr */
+ E1000_GORCH = 0x0408C, /* Good Octets Rx Count High - R/clr */
+ E1000_GOTCL = 0x04090, /* Good Octets Tx Count Low - R/clr */
+ E1000_GOTCH = 0x04094, /* Good Octets Tx Count High - R/clr */
+ E1000_RNBC = 0x040A0, /* Rx No Buffers Count - R/clr */
+ E1000_RUC = 0x040A4, /* Rx Undersize Count - R/clr */
+ E1000_RFC = 0x040A8, /* Rx Fragment Count - R/clr */
+ E1000_ROC = 0x040AC, /* Rx Oversize Count - R/clr */
+ E1000_RJC = 0x040B0, /* Rx Jabber Count - R/clr */
+ E1000_MGTPRC = 0x040B4, /* Management Packets Rx Count - R/clr */
E1000_MGTPDC = 0x040B8, /* Management Packets Dropped Count - R/clr */
- E1000_MGTPTC = 0x040BC, /* Management Packets TX Count - R/clr */
- E1000_TORL = 0x040C0, /* Total Octets RX Low - R/clr */
- E1000_TORH = 0x040C4, /* Total Octets RX High - R/clr */
- E1000_TOTL = 0x040C8, /* Total Octets TX Low - R/clr */
- E1000_TOTH = 0x040CC, /* Total Octets TX High - R/clr */
- E1000_TPR = 0x040D0, /* Total Packets RX - R/clr */
- E1000_TPT = 0x040D4, /* Total Packets TX - R/clr */
- E1000_PTC64 = 0x040D8, /* Packets TX (64 bytes) - R/clr */
- E1000_PTC127 = 0x040DC, /* Packets TX (65-127 bytes) - R/clr */
- E1000_PTC255 = 0x040E0, /* Packets TX (128-255 bytes) - R/clr */
- E1000_PTC511 = 0x040E4, /* Packets TX (256-511 bytes) - R/clr */
- E1000_PTC1023 = 0x040E8, /* Packets TX (512-1023 bytes) - R/clr */
- E1000_PTC1522 = 0x040EC, /* Packets TX (1024-1522 Bytes) - R/clr */
- E1000_MPTC = 0x040F0, /* Multicast Packets TX Count - R/clr */
- E1000_BPTC = 0x040F4, /* Broadcast Packets TX Count - R/clr */
- E1000_TSCTC = 0x040F8, /* TCP Segmentation Context TX - R/clr */
- E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context TX Fail - R/clr */
+ E1000_MGTPTC = 0x040BC, /* Management Packets Tx Count - R/clr */
+ E1000_TORL = 0x040C0, /* Total Octets Rx Low - R/clr */
+ E1000_TORH = 0x040C4, /* Total Octets Rx High - R/clr */
+ E1000_TOTL = 0x040C8, /* Total Octets Tx Low - R/clr */
+ E1000_TOTH = 0x040CC, /* Total Octets Tx High - R/clr */
+ E1000_TPR = 0x040D0, /* Total Packets Rx - R/clr */
+ E1000_TPT = 0x040D4, /* Total Packets Tx - R/clr */
+ E1000_PTC64 = 0x040D8, /* Packets Tx (64 bytes) - R/clr */
+ E1000_PTC127 = 0x040DC, /* Packets Tx (65-127 bytes) - R/clr */
+ E1000_PTC255 = 0x040E0, /* Packets Tx (128-255 bytes) - R/clr */
+ E1000_PTC511 = 0x040E4, /* Packets Tx (256-511 bytes) - R/clr */
+ E1000_PTC1023 = 0x040E8, /* Packets Tx (512-1023 bytes) - R/clr */
+ E1000_PTC1522 = 0x040EC, /* Packets Tx (1024-1522 Bytes) - R/clr */
+ E1000_MPTC = 0x040F0, /* Multicast Packets Tx Count - R/clr */
+ E1000_BPTC = 0x040F4, /* Broadcast Packets Tx Count - R/clr */
+ E1000_TSCTC = 0x040F8, /* TCP Segmentation Context Tx - R/clr */
+ E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context Tx Fail - R/clr */
E1000_IAC = 0x04100, /* Interrupt Assertion Count */
E1000_ICRXPTC = 0x04104, /* Irq Cause Rx Packet Timer Expire Count */
E1000_ICRXATC = 0x04108, /* Irq Cause Rx Abs Timer Expire Count */
@@ -183,7 +185,7 @@ enum e1e_registers {
E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */
E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */
- E1000_RXCSUM = 0x05000, /* RX Checksum Control - RW */
+ E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */
E1000_RFCTL = 0x05008, /* Receive Filter Control */
E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */
E1000_RA = 0x05400, /* Receive Address - RW Array */
@@ -250,8 +252,8 @@ enum e1e_registers {
#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
#define E1000_HICR_EN 0x01 /* Enable bit - RO */
-#define E1000_HICR_C 0x02 /* Driver sets this bit when done
- * to put command in RAM */
+/* Driver sets this bit when done to put command in RAM */
+#define E1000_HICR_C 0x02
#define E1000_HICR_FW_RESET_ENABLE 0x40
#define E1000_HICR_FW_RESET 0x80
@@ -400,7 +402,7 @@ enum e1000_rev_polarity{
e1000_rev_polarity_undefined = 0xFF
};
-enum e1000_fc_mode {
+enum e1000_fc_type {
e1000_fc_none = 0,
e1000_fc_rx_pause,
e1000_fc_tx_pause,
@@ -685,8 +687,7 @@ struct e1000_mac_operations {
s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
s32 (*led_on)(struct e1000_hw *);
s32 (*led_off)(struct e1000_hw *);
- void (*mc_addr_list_update)(struct e1000_hw *, u8 *, u32, u32,
- u32);
+ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32, u32);
s32 (*reset_hw)(struct e1000_hw *);
s32 (*init_hw)(struct e1000_hw *);
s32 (*setup_link)(struct e1000_hw *);
@@ -728,16 +729,12 @@ struct e1000_mac_info {
u8 perm_addr[6];
enum e1000_mac_type type;
- enum e1000_fc_mode fc;
- enum e1000_fc_mode original_fc;
u32 collision_delta;
u32 ledctl_default;
u32 ledctl_mode1;
u32 ledctl_mode2;
- u32 max_frame_size;
u32 mc_filter_type;
- u32 min_frame_size;
u32 tx_packet_delta;
u32 txcw;
@@ -748,9 +745,6 @@ struct e1000_mac_info {
u16 ifs_step_size;
u16 mta_reg_count;
u16 rar_entry_count;
- u16 fc_high_water;
- u16 fc_low_water;
- u16 fc_pause_time;
u8 forced_speed_duplex;
@@ -780,6 +774,8 @@ struct e1000_phy_info {
u32 reset_delay_us; /* in usec */
u32 revision;
+ enum e1000_media_type media_type;
+
u16 autoneg_advertised;
u16 autoneg_mask;
u16 cable_length;
@@ -792,7 +788,7 @@ struct e1000_phy_info {
bool is_mdix;
bool polarity_correction;
bool speed_downgraded;
- bool wait_for_link;
+ bool autoneg_wait_to_complete;
};
struct e1000_nvm_info {
@@ -817,6 +813,16 @@ struct e1000_bus_info {
u16 func;
};
+struct e1000_fc_info {
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_type type; /* Type of flow control */
+ enum e1000_fc_type original_type;
+};
+
struct e1000_dev_spec_82571 {
bool laa_is_present;
bool alt_mac_addr_is_present;
@@ -841,6 +847,7 @@ struct e1000_hw {
u8 __iomem *flash_address;
struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
struct e1000_phy_info phy;
struct e1000_nvm_info nvm;
struct e1000_bus_info bus;
@@ -850,8 +857,6 @@ struct e1000_hw {
struct e1000_dev_spec_82571 e82571;
struct e1000_dev_spec_ich8lan ich8lan;
} dev_spec;
-
- enum e1000_media_type media_type;
};
#ifdef DEBUG
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 0ae39550768d5ebdd1ef07664aec329aa25abac9..768485dbb2c6e1ee29e74e122dd295b1495989b0 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -243,8 +243,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
u32 sector_end_addr;
u16 i;
- /* Can't read flash registers if the register set isn't mapped.
- */
+ /* Can't read flash registers if the register set isn't mapped. */
if (!hw->flash_address) {
hw_dbg(hw, "ERROR: Flash registers not mapped\n");
return -E1000_ERR_CONFIG;
@@ -254,17 +253,21 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
gfpreg = er32flash(ICH_FLASH_GFPREG);
- /* sector_X_addr is a "sector"-aligned address (4096 bytes)
+ /*
+ * sector_X_addr is a "sector"-aligned address (4096 bytes)
* Add 1 to sector_end_addr since this sector is included in
- * the overall size. */
+ * the overall size.
+ */
sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
/* flash_base_addr is byte-aligned */
nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
- /* find total size of the NVM, then cut in half since the total
- * size represents two separate NVM banks. */
+ /*
+ * find total size of the NVM, then cut in half since the total
+ * size represents two separate NVM banks.
+ */
nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
<< FLASH_SECTOR_ADDR_SHIFT;
nvm->flash_bank_size /= 2;
@@ -295,7 +298,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
struct e1000_mac_info *mac = &hw->mac;
/* Set media type function pointer */
- hw->media_type = e1000_media_type_copper;
+ hw->phy.media_type = e1000_media_type_copper;
/* Set mta register count */
mac->mta_reg_count = 32;
@@ -313,7 +316,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
return 0;
}
-static s32 e1000_get_invariants_ich8lan(struct e1000_adapter *adapter)
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
s32 rc;
@@ -450,7 +453,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
udelay(1);
- if (phy->wait_for_link) {
+ if (phy->autoneg_wait_to_complete) {
hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
ret_val = e1000e_phy_has_link_generic(hw,
@@ -496,7 +499,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Initialize the PHY from the NVM on ICH platforms. This
+ /*
+ * Initialize the PHY from the NVM on ICH platforms. This
* is needed due to an issue where the NVM configuration is
* not properly autoloaded after power transitions.
* Therefore, after each PHY reset, we will load the
@@ -523,7 +527,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
udelay(100);
} while ((!data) && --loop);
- /* If basic configuration is incomplete before the above loop
+ /*
+ * If basic configuration is incomplete before the above loop
* count reaches 0, loading the configuration from NVM will
* leave the PHY in a bad state possibly resulting in no link.
*/
@@ -536,8 +541,10 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
data &= ~E1000_STATUS_LAN_INIT_DONE;
ew32(STATUS, data);
- /* Make sure HW does not configure LCD from PHY
- * extended configuration before SW configuration */
+ /*
+ * Make sure HW does not configure LCD from PHY
+ * extended configuration before SW configuration
+ */
data = er32(EXTCNF_CTRL);
if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
return 0;
@@ -551,8 +558,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
- /* Configure LCD from extended configuration
- * region. */
+ /* Configure LCD from extended configuration region. */
/* cnf_base_addr is in DWORD */
word_addr = (u16)(cnf_base_addr << 1);
@@ -681,8 +687,8 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data, offset, mask;
- /* Polarity is determined based on the reversal feature
- * being enabled.
+ /*
+ * Polarity is determined based on the reversal feature being enabled.
*/
if (phy->polarity_correction) {
offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
@@ -731,8 +737,10 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
- /* Call gig speed drop workaround on LPLU before accessing
- * any PHY registers */
+ /*
+ * Call gig speed drop workaround on LPLU before accessing
+ * any PHY registers
+ */
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3))
e1000e_gig_downshift_workaround_ich8lan(hw);
@@ -747,30 +755,32 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
* important. During driver activity we should enable
- * SmartSpeed, so performance is maintained. */
+ * SmartSpeed, so performance is maintained.
+ */
if (phy->smart_speed == e1000_smart_speed_on) {
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
}
@@ -804,34 +814,32 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
if (!active) {
phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
* important. During driver activity we should enable
- * SmartSpeed, so performance is maintained. */
+ * SmartSpeed, so performance is maintained.
+ */
if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
if (ret_val)
return ret_val;
}
@@ -841,23 +849,21 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
- /* Call gig speed drop workaround on LPLU before accessing
- * any PHY registers */
+ /*
+ * Call gig speed drop workaround on LPLU before accessing
+ * any PHY registers
+ */
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3))
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = e1e_rphy(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
}
return 0;
@@ -944,7 +950,8 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
- /* Either we should have a hardware SPI cycle in progress
+ /*
+ * Either we should have a hardware SPI cycle in progress
* bit to check against, in order to start a new cycle or
* FDONE bit should be changed in the hardware so that it
* is 1 after hardware reset, which can then be used as an
@@ -953,15 +960,19 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
*/
if (hsfsts.hsf_status.flcinprog == 0) {
- /* There is no cycle running at present,
- * so we can start a cycle */
- /* Begin by setting Flash Cycle Done. */
+ /*
+ * There is no cycle running at present,
+ * so we can start a cycle
+ * Begin by setting Flash Cycle Done.
+ */
hsfsts.hsf_status.flcdone = 1;
ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
ret_val = 0;
} else {
- /* otherwise poll for sometime so the current
- * cycle has a chance to end before giving up. */
+ /*
+ * otherwise poll for sometime so the current
+ * cycle has a chance to end before giving up.
+ */
for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
hsfsts.regval = __er16flash(hw, ICH_FLASH_HSFSTS);
if (hsfsts.hsf_status.flcinprog == 0) {
@@ -971,8 +982,10 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
udelay(1);
}
if (ret_val == 0) {
- /* Successful in waiting for previous cycle to timeout,
- * now set the Flash Cycle Done. */
+ /*
+ * Successful in waiting for previous cycle to timeout,
+ * now set the Flash Cycle Done.
+ */
hsfsts.hsf_status.flcdone = 1;
ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
} else {
@@ -1077,10 +1090,12 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
ret_val = e1000_flash_cycle_ich8lan(hw,
ICH_FLASH_READ_COMMAND_TIMEOUT);
- /* Check if FCERR is set to 1, if set to 1, clear it
+ /*
+ * Check if FCERR is set to 1, if set to 1, clear it
* and try the whole sequence a few more times, else
* read in (shift in) the Flash Data0, the order is
- * least significant byte first msb to lsb */
+ * least significant byte first msb to lsb
+ */
if (ret_val == 0) {
flash_data = er32flash(ICH_FLASH_FDATA0);
if (size == 1) {
@@ -1090,7 +1105,8 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
}
break;
} else {
- /* If we've gotten here, then things are probably
+ /*
+ * If we've gotten here, then things are probably
* completely hosed, but if the error condition is
* detected, it won't hurt to give it another try...
* ICH_FLASH_CYCLE_REPEAT_COUNT times.
@@ -1168,18 +1184,20 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
ret_val = e1000e_update_nvm_checksum_generic(hw);
if (ret_val)
- return ret_val;;
+ return ret_val;
if (nvm->type != e1000_nvm_flash_sw)
- return ret_val;;
+ return ret_val;
ret_val = e1000_acquire_swflag_ich8lan(hw);
if (ret_val)
- return ret_val;;
+ return ret_val;
- /* We're writing to the opposite bank so if we're on bank 1,
+ /*
+ * We're writing to the opposite bank so if we're on bank 1,
* write to bank 0 etc. We also need to erase the segment that
- * is going to be written */
+ * is going to be written
+ */
if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
new_bank_offset = nvm->flash_bank_size;
old_bank_offset = 0;
@@ -1191,9 +1209,11 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
}
for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
- /* Determine whether to write the value stored
+ /*
+ * Determine whether to write the value stored
* in the other NVM bank or a modified value stored
- * in the shadow RAM */
+ * in the shadow RAM
+ */
if (dev_spec->shadow_ram[i].modified) {
data = dev_spec->shadow_ram[i].value;
} else {
@@ -1202,12 +1222,14 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
&data);
}
- /* If the word is 0x13, then make sure the signature bits
+ /*
+ * If the word is 0x13, then make sure the signature bits
* (15:14) are 11b until the commit has completed.
* This will allow us to write 10b which indicates the
* signature is valid. We want to do this after the write
* has completed so that we don't mark the segment valid
- * while the write is still in progress */
+ * while the write is still in progress
+ */
if (i == E1000_ICH_NVM_SIG_WORD)
data |= E1000_ICH_NVM_SIG_MASK;
@@ -1230,18 +1252,22 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
break;
}
- /* Don't bother writing the segment valid bits if sector
- * programming failed. */
+ /*
+ * Don't bother writing the segment valid bits if sector
+ * programming failed.
+ */
if (ret_val) {
hw_dbg(hw, "Flash commit failed.\n");
e1000_release_swflag_ich8lan(hw);
return ret_val;
}
- /* Finally validate the new segment by setting bit 15:14
+ /*
+ * Finally validate the new segment by setting bit 15:14
* to 10b in word 0x13 , this can be done without an
* erase as well since these bits are 11 to start with
- * and we need to change bit 14 to 0b */
+ * and we need to change bit 14 to 0b
+ */
act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
e1000_read_flash_word_ich8lan(hw, act_offset, &data);
data &= 0xBFFF;
@@ -1253,10 +1279,12 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
return ret_val;
}
- /* And invalidate the previously valid segment by setting
+ /*
+ * And invalidate the previously valid segment by setting
* its signature word (0x13) high_byte to 0b. This can be
* done without an erase because flash erase sets all bits
- * to 1's. We can write 1's to 0's without an erase */
+ * to 1's. We can write 1's to 0's without an erase
+ */
act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
if (ret_val) {
@@ -1272,7 +1300,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
e1000_release_swflag_ich8lan(hw);
- /* Reload the EEPROM, or else modifications will not appear
+ /*
+ * Reload the EEPROM, or else modifications will not appear
* until after the next adapter reset.
*/
e1000e_reload_nvm(hw);
@@ -1294,7 +1323,8 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
s32 ret_val;
u16 data;
- /* Read 0x19 and check bit 6. If this bit is 0, the checksum
+ /*
+ * Read 0x19 and check bit 6. If this bit is 0, the checksum
* needs to be fixed. This bit is an indication that the NVM
* was prepared by OEM software and did not calculate the
* checksum...a likely scenario.
@@ -1364,14 +1394,17 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
ew32flash(ICH_FLASH_FDATA0, flash_data);
- /* check if FCERR is set to 1 , if set to 1, clear it
- * and try the whole sequence a few more times else done */
+ /*
+ * check if FCERR is set to 1 , if set to 1, clear it
+ * and try the whole sequence a few more times else done
+ */
ret_val = e1000_flash_cycle_ich8lan(hw,
ICH_FLASH_WRITE_COMMAND_TIMEOUT);
if (!ret_val)
break;
- /* If we're here, then things are most likely
+ /*
+ * If we're here, then things are most likely
* completely hosed, but if the error condition
* is detected, it won't hurt to give it another
* try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
@@ -1462,9 +1495,10 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- /* Determine HW Sector size: Read BERASE bits of hw flash status
- * register */
- /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+ /*
+ * Determine HW Sector size: Read BERASE bits of hw flash status
+ * register
+ * 00: The Hw sector is 256 bytes, hence we need to erase 16
* consecutive sectors. The start index for the nth Hw sector
* can be calculated as = bank * 4096 + n * 256
* 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
@@ -1511,13 +1545,16 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
if (ret_val)
return ret_val;
- /* Write a value 11 (block Erase) in Flash
- * Cycle field in hw flash control */
+ /*
+ * Write a value 11 (block Erase) in Flash
+ * Cycle field in hw flash control
+ */
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
- /* Write the last 24 bits of an index within the
+ /*
+ * Write the last 24 bits of an index within the
* block into Flash Linear address field in Flash
* Address.
*/
@@ -1529,13 +1566,14 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
if (ret_val == 0)
break;
- /* Check if FCERR is set to 1. If 1,
+ /*
+ * Check if FCERR is set to 1. If 1,
* clear it and try the whole sequence
- * a few more times else Done */
+ * a few more times else Done
+ */
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
if (hsfsts.hsf_status.flcerr == 1)
- /* repeat for some time before
- * giving up */
+ /* repeat for some time before giving up */
continue;
else if (hsfsts.hsf_status.flcdone == 0)
return ret_val;
@@ -1585,7 +1623,8 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
ret_val = e1000e_get_bus_info_pcie(hw);
- /* ICH devices are "PCI Express"-ish. They have
+ /*
+ * ICH devices are "PCI Express"-ish. They have
* a configuration space, but do not contain
* PCI Express Capability registers, so bus width
* must be hardcoded.
@@ -1608,7 +1647,8 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
u32 ctrl, icr, kab;
s32 ret_val;
- /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
ret_val = e1000e_disable_pcie_master(hw);
@@ -1619,7 +1659,8 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
hw_dbg(hw, "Masking off all interrupts\n");
ew32(IMC, 0xffffffff);
- /* Disable the Transmit and Receive units. Then delay to allow
+ /*
+ * Disable the Transmit and Receive units. Then delay to allow
* any pending transactions to complete before we hit the MAC
* with the global reset.
*/
@@ -1640,7 +1681,8 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
- /* PHY HW reset requires MAC CORE reset at the same
+ /*
+ * PHY HW reset requires MAC CORE reset at the same
* time to make sure the interface between MAC and the
* external PHY is reset.
*/
@@ -1711,21 +1753,23 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
ret_val = e1000_setup_link_ich8lan(hw);
/* Set the transmit descriptor write-back policy for both queues */
- txdctl = er32(TXDCTL);
+ txdctl = er32(TXDCTL(0));
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB;
txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
- ew32(TXDCTL, txdctl);
- txdctl = er32(TXDCTL1);
+ ew32(TXDCTL(0), txdctl);
+ txdctl = er32(TXDCTL(1));
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB;
txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
- ew32(TXDCTL1, txdctl);
+ ew32(TXDCTL(1), txdctl);
- /* ICH8 has opposite polarity of no_snoop bits.
- * By default, we should use snoop behavior. */
+ /*
+ * ICH8 has opposite polarity of no_snoop bits.
+ * By default, we should use snoop behavior.
+ */
if (mac->type == e1000_ich8lan)
snoop = PCIE_ICH8_SNOOP_ALL;
else
@@ -1736,7 +1780,8 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
ew32(CTRL_EXT, ctrl_ext);
- /* Clear all of the statistics registers (clear on read). It is
+ /*
+ * Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
* is no link.
@@ -1762,30 +1807,30 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
ew32(CTRL_EXT, reg);
/* Transmit Descriptor Control 0 */
- reg = er32(TXDCTL);
+ reg = er32(TXDCTL(0));
reg |= (1 << 22);
- ew32(TXDCTL, reg);
+ ew32(TXDCTL(0), reg);
/* Transmit Descriptor Control 1 */
- reg = er32(TXDCTL1);
+ reg = er32(TXDCTL(1));
reg |= (1 << 22);
- ew32(TXDCTL1, reg);
+ ew32(TXDCTL(1), reg);
/* Transmit Arbitration Control 0 */
- reg = er32(TARC0);
+ reg = er32(TARC(0));
if (hw->mac.type == e1000_ich8lan)
reg |= (1 << 28) | (1 << 29);
reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27);
- ew32(TARC0, reg);
+ ew32(TARC(0), reg);
/* Transmit Arbitration Control 1 */
- reg = er32(TARC1);
+ reg = er32(TARC(1));
if (er32(TCTL) & E1000_TCTL_MULR)
reg &= ~(1 << 28);
else
reg |= (1 << 28);
reg |= (1 << 24) | (1 << 26) | (1 << 30);
- ew32(TARC1, reg);
+ ew32(TARC(1), reg);
/* Device Status */
if (hw->mac.type == e1000_ich8lan) {
@@ -1807,29 +1852,29 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
{
- struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
if (e1000_check_reset_block(hw))
return 0;
- /* ICH parts do not have a word in the NVM to determine
+ /*
+ * ICH parts do not have a word in the NVM to determine
* the default flow control setting, so we explicitly
* set it to full.
*/
- if (mac->fc == e1000_fc_default)
- mac->fc = e1000_fc_full;
+ if (hw->fc.type == e1000_fc_default)
+ hw->fc.type = e1000_fc_full;
- mac->original_fc = mac->fc;
+ hw->fc.original_type = hw->fc.type;
- hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", mac->fc);
+ hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type);
/* Continue to configure the copper link. */
ret_val = e1000_setup_copper_link_ich8lan(hw);
if (ret_val)
return ret_val;
- ew32(FCTTV, mac->fc_pause_time);
+ ew32(FCTTV, hw->fc.pause_time);
return e1000e_set_fc_watermarks(hw);
}
@@ -1853,9 +1898,11 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
ew32(CTRL, ctrl);
- /* Set the mac to wait the maximum time between each iteration
+ /*
+ * Set the mac to wait the maximum time between each iteration
* and increase the max iterations when polling the phy;
- * this fixes erroneous timeouts at 10Mbps. */
+ * this fixes erroneous timeouts at 10Mbps.
+ */
ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
if (ret_val)
return ret_val;
@@ -1882,7 +1929,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
* @speed: pointer to store current link speed
* @duplex: pointer to store the current link duplex
*
- * Calls the generic get_speed_and_duplex to retreive the current link
+ * Calls the generic get_speed_and_duplex to retrieve the current link
* information and then calls the Kumeran lock loss workaround for links at
* gigabit speeds.
**/
@@ -1930,9 +1977,11 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
if (!dev_spec->kmrn_lock_loss_workaround_enabled)
return 0;
- /* Make sure link is up before proceeding. If not just return.
+ /*
+ * Make sure link is up before proceeding. If not just return.
* Attempting this while link is negotiating fouled up link
- * stability */
+ * stability
+ */
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (!link)
return 0;
@@ -1961,8 +2010,10 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
ew32(PHY_CTRL, phy_ctrl);
- /* Call gig speed drop workaround on Gig disable before accessing
- * any PHY registers */
+ /*
+ * Call gig speed drop workaround on Gig disable before accessing
+ * any PHY registers
+ */
e1000e_gig_downshift_workaround_ich8lan(hw);
/* unable to acquire PCS lock */
@@ -1970,7 +2021,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
}
/**
- * e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state
+ * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
* @hw: pointer to the HW structure
* @state: boolean value used to set the current Kumeran workaround state
*
@@ -2017,8 +2068,10 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
ew32(PHY_CTRL, reg);
- /* Call gig speed drop workaround on Gig disable before
- * accessing any PHY registers */
+ /*
+ * Call gig speed drop workaround on Gig disable before
+ * accessing any PHY registers
+ */
if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
@@ -2158,7 +2211,7 @@ static struct e1000_mac_operations ich8_mac_ops = {
.get_link_up_info = e1000_get_link_up_info_ich8lan,
.led_on = e1000_led_on_ich8lan,
.led_off = e1000_led_off_ich8lan,
- .mc_addr_list_update = e1000e_mc_addr_list_update_generic,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
.reset_hw = e1000_reset_hw_ich8lan,
.init_hw = e1000_init_hw_ich8lan,
.setup_link = e1000_setup_link_ich8lan,
@@ -2200,7 +2253,7 @@ struct e1000_info e1000_ich8_info = {
| FLAG_HAS_FLASH
| FLAG_APME_IN_WUC,
.pba = 8,
- .get_invariants = e1000_get_invariants_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
.phy_ops = &ich8_phy_ops,
.nvm_ops = &ich8_nvm_ops,
@@ -2217,7 +2270,7 @@ struct e1000_info e1000_ich9_info = {
| FLAG_HAS_FLASH
| FLAG_APME_IN_WUC,
.pba = 10,
- .get_invariants = e1000_get_invariants_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
.mac_ops = &ich8_mac_ops,
.phy_ops = &ich8_phy_ops,
.nvm_ops = &ich8_nvm_ops,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 95f75a43c9f93fff6602a62a53dd89b0c6ce12b9..f1f4e9dfd0a069d0a4a81864f018280947ac2f0f 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -43,8 +43,8 @@ enum e1000_mng_mode {
#define E1000_FACTPS_MNGCG 0x20000000
-#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management
- * Technology signature */
+/* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE 0x544D4149
/**
* e1000e_get_bus_info_pcie - Get PCIe bus information
@@ -142,7 +142,8 @@ void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
{
u32 rar_low, rar_high;
- /* HW expects these in little endian so we reverse the byte order
+ /*
+ * HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
rar_low = ((u32) addr[0] |
@@ -171,7 +172,8 @@ static void e1000_mta_set(struct e1000_hw *hw, u32 hash_value)
{
u32 hash_bit, hash_reg, mta;
- /* The MTA is a register array of 32-bit registers. It is
+ /*
+ * The MTA is a register array of 32-bit registers. It is
* treated like an array of (32*mta_reg_count) bits. We want to
* set bit BitArray[hash_value]. So we figure out what register
* the bit is in, read it, OR in the new bit, then write
@@ -208,12 +210,15 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
/* Register count multiplied by bits per register */
hash_mask = (hw->mac.mta_reg_count * 32) - 1;
- /* For a mc_filter_type of 0, bit_shift is the number of left-shifts
- * where 0xFF would still fall within the hash mask. */
+ /*
+ * For a mc_filter_type of 0, bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
while (hash_mask >> bit_shift != 0xFF)
bit_shift++;
- /* The portion of the address that is used for the hash table
+ /*
+ * The portion of the address that is used for the hash table
* is determined by the mc_filter_type setting.
* The algorithm is such that there is a total of 8 bits of shifting.
* The bit_shift for a mc_filter_type of 0 represents the number of
@@ -224,8 +229,8 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
* cases are a variation of this algorithm...essentially raising the
* number of bits to shift mc_addr[5] left, while still keeping the
* 8-bit shifting total.
- */
- /* For example, given the following Destination MAC Address and an
+ *
+ * For example, given the following Destination MAC Address and an
* mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
* we can see that the bit_shift for case 0 is 4. These are the hash
* values resulting from each mc_filter_type...
@@ -260,7 +265,7 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
}
/**
- * e1000e_mc_addr_list_update_generic - Update Multicast addresses
+ * e1000e_update_mc_addr_list_generic - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
@@ -272,14 +277,15 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
* The parameter rar_count will usually be hw->mac.rar_entry_count
* unless there are workarounds that change this.
**/
-void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count,
- u32 rar_used_count, u32 rar_count)
+void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count,
+ u32 rar_used_count, u32 rar_count)
{
u32 hash_value;
u32 i;
- /* Load the first set of multicast addresses into the exact
+ /*
+ * Load the first set of multicast addresses into the exact
* filters (RAR). If there are not enough to fill the RAR
* array, clear the filters.
*/
@@ -375,7 +381,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
s32 ret_val;
bool link;
- /* We only want to go out to the PHY registers to see if Auto-Neg
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
* has completed and/or if our link status has changed. The
* get_link_status flag is set upon receiving a Link Status
* Change or Rx Sequence Error interrupt.
@@ -383,7 +390,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
if (!mac->get_link_status)
return 0;
- /* First we want to see if the MII Status Register reports
+ /*
+ * First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
* of the PHY.
*/
@@ -396,11 +404,14 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
mac->get_link_status = 0;
- /* Check if there was DownShift, must be checked
- * immediately after link-up */
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
e1000e_check_downshift(hw);
- /* If we are forcing speed/duplex, then we simply return since
+ /*
+ * If we are forcing speed/duplex, then we simply return since
* we have already determined whether we have link or not.
*/
if (!mac->autoneg) {
@@ -408,13 +419,15 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
return ret_val;
}
- /* Auto-Neg is enabled. Auto Speed Detection takes care
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
* of MAC speed/duplex configuration. So we only need to
* configure Collision Distance in the MAC.
*/
e1000e_config_collision_dist(hw);
- /* Configure Flow Control now that Auto-Neg has completed.
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
* First, we need to restore the desired flow control
* settings because we may have had to re-autoneg with a
* different link partner.
@@ -446,7 +459,8 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
status = er32(STATUS);
rxcw = er32(RXCW);
- /* If we don't have link (auto-negotiation failed or link partner
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
* cannot auto-negotiate), the cable is plugged in (we have signal),
* and our link partner is not trying to auto-negotiate with us (we
* are receiving idles or data), we need to force link up. We also
@@ -477,7 +491,8 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
return ret_val;
}
} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- /* If we are forcing link and we are receiving /C/ ordered
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
* sets, re-enable auto-negotiation in the TXCW register
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
@@ -511,7 +526,8 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
status = er32(STATUS);
rxcw = er32(RXCW);
- /* If we don't have link (auto-negotiation failed or link partner
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
* cannot auto-negotiate), and our link partner is not trying to
* auto-negotiate with us (we are receiving idles or data),
* we need to force link up. We also need to give auto-negotiation
@@ -540,7 +556,8 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
return ret_val;
}
} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- /* If we are forcing link and we are receiving /C/ ordered
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
* sets, re-enable auto-negotiation in the TXCW register
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
@@ -551,7 +568,8 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
mac->serdes_has_link = 1;
} else if (!(E1000_TXCW_ANE & er32(TXCW))) {
- /* If we force link for non-auto-negotiation switch, check
+ /*
+ * If we force link for non-auto-negotiation switch, check
* link status based on MAC synchronization for internal
* serdes media type.
*/
@@ -585,11 +603,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
**/
static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
{
- struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
u16 nvm_data;
- /* Read and store word 0x0F of the EEPROM. This word contains bits
+ /*
+ * Read and store word 0x0F of the EEPROM. This word contains bits
* that determine the hardware's default PAUSE (flow control) mode,
* a bit that determines whether the HW defaults to enabling or
* disabling auto-negotiation, and the direction of the
@@ -605,12 +623,12 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
}
if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
- mac->fc = e1000_fc_none;
+ hw->fc.type = e1000_fc_none;
else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
NVM_WORD0F_ASM_DIR)
- mac->fc = e1000_fc_tx_pause;
+ hw->fc.type = e1000_fc_tx_pause;
else
- mac->fc = e1000_fc_full;
+ hw->fc.type = e1000_fc_full;
return 0;
}
@@ -630,7 +648,8 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
- /* In the case of the phy reset being blocked, we already have a link.
+ /*
+ * In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
if (e1000_check_reset_block(hw))
@@ -640,26 +659,28 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
* If flow control is set to default, set flow control based on
* the EEPROM flow control settings.
*/
- if (mac->fc == e1000_fc_default) {
+ if (hw->fc.type == e1000_fc_default) {
ret_val = e1000_set_default_fc_generic(hw);
if (ret_val)
return ret_val;
}
- /* We want to save off the original Flow Control configuration just
+ /*
+ * We want to save off the original Flow Control configuration just
* in case we get disconnected and then reconnected into a different
* hub or switch with different Flow Control capabilities.
*/
- mac->original_fc = mac->fc;
+ hw->fc.original_type = hw->fc.type;
- hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", mac->fc);
+ hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type);
/* Call the necessary media_type subroutine to configure the link. */
ret_val = mac->ops.setup_physical_interface(hw);
if (ret_val)
return ret_val;
- /* Initialize the flow control address, type, and PAUSE timer
+ /*
+ * Initialize the flow control address, type, and PAUSE timer
* registers to their default values. This is done even if flow
* control is disabled, because it does not hurt anything to
* initialize these registers.
@@ -669,7 +690,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
- ew32(FCTTV, mac->fc_pause_time);
+ ew32(FCTTV, hw->fc.pause_time);
return e1000e_set_fc_watermarks(hw);
}
@@ -686,7 +707,8 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
struct e1000_mac_info *mac = &hw->mac;
u32 txcw;
- /* Check for a software override of the flow control settings, and
+ /*
+ * Check for a software override of the flow control settings, and
* setup the device accordingly. If auto-negotiation is enabled, then
* software will have to set the "PAUSE" bits to the correct value in
* the Transmit Config Word Register (TXCW) and re-start auto-
@@ -700,31 +722,34 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
* but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames but we
* do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
*/
- switch (mac->fc) {
+ switch (hw->fc.type) {
case e1000_fc_none:
/* Flow control completely disabled by a software over-ride. */
txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
break;
case e1000_fc_rx_pause:
- /* RX Flow control is enabled and TX Flow control is disabled
+ /*
+ * Rx Flow control is enabled and Tx Flow control is disabled
* by a software over-ride. Since there really isn't a way to
- * advertise that we are capable of RX Pause ONLY, we will
- * advertise that we support both symmetric and asymmetric RX
+ * advertise that we are capable of Rx Pause ONLY, we will
+ * advertise that we support both symmetric and asymmetric Rx
* PAUSE. Later, we will disable the adapter's ability to send
* PAUSE frames.
*/
txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
break;
case e1000_fc_tx_pause:
- /* TX Flow control is enabled, and RX Flow control is disabled,
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is disabled,
* by a software over-ride.
*/
txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
break;
case e1000_fc_full:
- /* Flow control (both RX and TX) is enabled by a software
+ /*
+ * Flow control (both Rx and Tx) is enabled by a software
* over-ride.
*/
txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
@@ -754,7 +779,8 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
u32 i, status;
s32 ret_val;
- /* If we have a signal (the cable is plugged in, or assumed true for
+ /*
+ * If we have a signal (the cable is plugged in, or assumed true for
* serdes media) then poll for a "Link-Up" indication in the Device
* Status Register. Time-out if a link isn't seen in 500 milliseconds
* seconds (Auto-negotiation should complete in less than 500
@@ -769,7 +795,8 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
if (i == FIBER_LINK_UP_LIMIT) {
hw_dbg(hw, "Never got a valid link from auto-neg!!!\n");
mac->autoneg_failed = 1;
- /* AutoNeg failed to achieve a link, so we'll call
+ /*
+ * AutoNeg failed to achieve a link, so we'll call
* mac->check_for_link. This routine will force the
* link up if we detect a signal. This will allow us to
* communicate with non-autonegotiating link partners.
@@ -811,7 +838,8 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Since auto-negotiation is enabled, take the link out of reset (the
+ /*
+ * Since auto-negotiation is enabled, take the link out of reset (the
* link will be in reset, because we previously reset the chip). This
* will restart auto-negotiation. If auto-negotiation is successful
* then the link-up status bit will be set and the flow control enable
@@ -823,11 +851,12 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
e1e_flush();
msleep(1);
- /* For these adapters, the SW defineable pin 1 is set when the optics
+ /*
+ * For these adapters, the SW definable pin 1 is set when the optics
* detect a signal. If we have a signal, then poll for a "Link-Up"
* indication.
*/
- if (hw->media_type == e1000_media_type_internal_serdes ||
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
(er32(CTRL) & E1000_CTRL_SWDPIN1)) {
ret_val = e1000_poll_fiber_serdes_link_generic(hw);
} else {
@@ -864,27 +893,28 @@ void e1000e_config_collision_dist(struct e1000_hw *hw)
*
* Sets the flow control high/low threshold (watermark) registers. If
* flow control XON frame transmission is enabled, then set XON frame
- * tansmission as well.
+ * transmission as well.
**/
s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
{
- struct e1000_mac_info *mac = &hw->mac;
u32 fcrtl = 0, fcrth = 0;
- /* Set the flow control receive threshold registers. Normally,
+ /*
+ * Set the flow control receive threshold registers. Normally,
* these registers will be set to a default threshold that may be
* adjusted later by the driver's runtime code. However, if the
* ability to transmit pause frames is not enabled, then these
* registers will be set to 0.
*/
- if (mac->fc & e1000_fc_tx_pause) {
- /* We need to set up the Receive Threshold high and low water
+ if (hw->fc.type & e1000_fc_tx_pause) {
+ /*
+ * We need to set up the Receive Threshold high and low water
* marks as well as (optionally) enabling the transmission of
* XON frames.
*/
- fcrtl = mac->fc_low_water;
+ fcrtl = hw->fc.low_water;
fcrtl |= E1000_FCRTL_XONE;
- fcrth = mac->fc_high_water;
+ fcrth = hw->fc.high_water;
}
ew32(FCRTL, fcrtl);
ew32(FCRTH, fcrth);
@@ -904,18 +934,18 @@ s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
**/
s32 e1000e_force_mac_fc(struct e1000_hw *hw)
{
- struct e1000_mac_info *mac = &hw->mac;
u32 ctrl;
ctrl = er32(CTRL);
- /* Because we didn't get link via the internal auto-negotiation
+ /*
+ * Because we didn't get link via the internal auto-negotiation
* mechanism (we either forced link or we got link via PHY
* auto-neg), we have to manually enable/disable transmit an
* receive flow control.
*
* The "Case" statement below enables/disable flow control
- * according to the "mac->fc" parameter.
+ * according to the "hw->fc.type" parameter.
*
* The possible values of the "fc" parameter are:
* 0: Flow control is completely disabled
@@ -923,12 +953,12 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
* frames but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames
* frames but we do not receive pause frames).
- * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * 3: Both Rx and Tx flow control (symmetric) is enabled.
* other: No other values should be possible at this point.
*/
- hw_dbg(hw, "mac->fc = %u\n", mac->fc);
+ hw_dbg(hw, "hw->fc.type = %u\n", hw->fc.type);
- switch (mac->fc) {
+ switch (hw->fc.type) {
case e1000_fc_none:
ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
break;
@@ -970,16 +1000,17 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
u16 speed, duplex;
- /* Check for the case where we have fiber media and auto-neg failed
+ /*
+ * Check for the case where we have fiber media and auto-neg failed
* so we had to force link. In this case, we need to force the
* configuration of the MAC to match the "fc" parameter.
*/
if (mac->autoneg_failed) {
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes)
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes)
ret_val = e1000e_force_mac_fc(hw);
} else {
- if (hw->media_type == e1000_media_type_copper)
+ if (hw->phy.media_type == e1000_media_type_copper)
ret_val = e1000e_force_mac_fc(hw);
}
@@ -988,13 +1019,15 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
return ret_val;
}
- /* Check for the case where we have copper media and auto-neg is
+ /*
+ * Check for the case where we have copper media and auto-neg is
* enabled. In this case, we need to check and see if Auto-Neg
* has completed, and if so, how the PHY and link partner has
* flow control configured.
*/
- if ((hw->media_type == e1000_media_type_copper) && mac->autoneg) {
- /* Read the MII Status Register and check to see if AutoNeg
+ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+ /*
+ * Read the MII Status Register and check to see if AutoNeg
* has completed. We read this twice because this reg has
* some "sticky" (latched) bits.
*/
@@ -1011,7 +1044,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
return ret_val;
}
- /* The AutoNeg process has completed, so we now need to
+ /*
+ * The AutoNeg process has completed, so we now need to
* read both the Auto Negotiation Advertisement
* Register (Address 4) and the Auto_Negotiation Base
* Page Ability Register (Address 5) to determine how
@@ -1024,7 +1058,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Two bits in the Auto Negotiation Advertisement Register
+ /*
+ * Two bits in the Auto Negotiation Advertisement Register
* (Address 4) and two bits in the Auto Negotiation Base
* Page Ability Register (Address 5) determine flow control
* for both the PHY and the link partner. The following
@@ -1045,8 +1080,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* 1 | 1 | 0 | 0 | e1000_fc_none
* 1 | 1 | 0 | 1 | e1000_fc_rx_pause
*
- */
- /* Are both PAUSE bits set to 1? If so, this implies
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
* Symmetric Flow Control is enabled at both ends. The
* ASM_DIR bits are irrelevant per the spec.
*
@@ -1060,22 +1095,24 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
*/
if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
- /* Now we need to check if the user selected RX ONLY
+ /*
+ * Now we need to check if the user selected Rx ONLY
* of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
+ * FULL flow control because we could not advertise Rx
* ONLY. Hence, we must now check to see if we need to
* turn OFF the TRANSMISSION of PAUSE frames.
*/
- if (mac->original_fc == e1000_fc_full) {
- mac->fc = e1000_fc_full;
+ if (hw->fc.original_type == e1000_fc_full) {
+ hw->fc.type = e1000_fc_full;
hw_dbg(hw, "Flow Control = FULL.\r\n");
} else {
- mac->fc = e1000_fc_rx_pause;
+ hw->fc.type = e1000_fc_rx_pause;
hw_dbg(hw, "Flow Control = "
"RX PAUSE frames only.\r\n");
}
}
- /* For receiving PAUSE frames ONLY.
+ /*
+ * For receiving PAUSE frames ONLY.
*
* LOCAL DEVICE | LINK PARTNER
* PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
@@ -1087,10 +1124,11 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- mac->fc = e1000_fc_tx_pause;
- hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n");
+ hw->fc.type = e1000_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n");
}
- /* For transmitting PAUSE frames ONLY.
+ /*
+ * For transmitting PAUSE frames ONLY.
*
* LOCAL DEVICE | LINK PARTNER
* PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
@@ -1102,18 +1140,19 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- mac->fc = e1000_fc_rx_pause;
- hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
+ hw->fc.type = e1000_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n");
} else {
/*
* Per the IEEE spec, at this point flow control
* should be disabled.
*/
- mac->fc = e1000_fc_none;
+ hw->fc.type = e1000_fc_none;
hw_dbg(hw, "Flow Control = NONE.\r\n");
}
- /* Now we need to do one last check... If we auto-
+ /*
+ * Now we need to do one last check... If we auto-
* negotiated to HALF DUPLEX, flow control should not be
* enabled per IEEE 802.3 spec.
*/
@@ -1124,9 +1163,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
}
if (duplex == HALF_DUPLEX)
- mac->fc = e1000_fc_none;
+ hw->fc.type = e1000_fc_none;
- /* Now we call a subroutine to actually force the MAC
+ /*
+ * Now we call a subroutine to actually force the MAC
* controller to use the correct flow control settings.
*/
ret_val = e1000e_force_mac_fc(hw);
@@ -1393,13 +1433,15 @@ s32 e1000e_blink_led(struct e1000_hw *hw)
u32 ledctl_blink = 0;
u32 i;
- if (hw->media_type == e1000_media_type_fiber) {
+ if (hw->phy.media_type == e1000_media_type_fiber) {
/* always blink LED0 for PCI-E fiber */
ledctl_blink = E1000_LEDCTL_LED0_BLINK |
(E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
} else {
- /* set the blink bit for each LED that's "on" (0x0E)
- * in ledctl_mode2 */
+ /*
+ * set the blink bit for each LED that's "on" (0x0E)
+ * in ledctl_mode2
+ */
ledctl_blink = hw->mac.ledctl_mode2;
for (i = 0; i < 4; i++)
if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
@@ -1423,7 +1465,7 @@ s32 e1000e_led_on_generic(struct e1000_hw *hw)
{
u32 ctrl;
- switch (hw->media_type) {
+ switch (hw->phy.media_type) {
case e1000_media_type_fiber:
ctrl = er32(CTRL);
ctrl &= ~E1000_CTRL_SWDPIN0;
@@ -1450,7 +1492,7 @@ s32 e1000e_led_off_generic(struct e1000_hw *hw)
{
u32 ctrl;
- switch (hw->media_type) {
+ switch (hw->phy.media_type) {
case e1000_media_type_fiber:
ctrl = er32(CTRL);
ctrl |= E1000_CTRL_SWDPIN0;
@@ -1562,8 +1604,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
else
mac->current_ifs_val +=
mac->ifs_step_size;
- ew32(AIT,
- mac->current_ifs_val);
+ ew32(AIT, mac->current_ifs_val);
}
}
} else {
@@ -1826,10 +1867,12 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
udelay(1);
timeout = NVM_MAX_RETRY_SPI;
- /* Read "Status Register" repeatedly until the LSB is cleared.
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared.
* The EEPROM will signal that the command has been completed
* by clearing bit 0 of the internal status register. If it's
- * not cleared within 'timeout', then error out. */
+ * not cleared within 'timeout', then error out.
+ */
while (timeout) {
e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
hw->nvm.opcode_bits);
@@ -1851,62 +1894,6 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
return 0;
}
-/**
- * e1000e_read_nvm_spi - Reads EEPROM using SPI
- * @hw: pointer to the HW structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM.
- **/
-s32 e1000e_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i = 0;
- s32 ret_val;
- u16 word_in;
- u8 read_opcode = NVM_READ_OPCODE_SPI;
-
- /* A check for invalid values: offset too large, too many words,
- * and not enough words. */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- hw_dbg(hw, "nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- ret_val = nvm->ops.acquire_nvm(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_ready_nvm_eeprom(hw);
- if (ret_val) {
- nvm->ops.release_nvm(hw);
- return ret_val;
- }
-
- e1000_standby_nvm(hw);
-
- if ((nvm->address_bits == 8) && (offset >= 128))
- read_opcode |= NVM_A8_OPCODE_SPI;
-
- /* Send the READ command (opcode + addr) */
- e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
- e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
-
- /* Read the data. SPI NVMs increment the address with each byte
- * read and will roll over if reading beyond the end. This allows
- * us to read the whole NVM from any offset */
- for (i = 0; i < words; i++) {
- word_in = e1000_shift_in_eec_bits(hw, 16);
- data[i] = (word_in >> 8) | (word_in << 8);
- }
-
- nvm->ops.release_nvm(hw);
- return 0;
-}
-
/**
* e1000e_read_nvm_eerd - Reads EEPROM using EERD register
* @hw: pointer to the HW structure
@@ -1922,8 +1909,10 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
u32 i, eerd = 0;
s32 ret_val = 0;
- /* A check for invalid values: offset too large, too many words,
- * and not enough words. */
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
(words == 0)) {
hw_dbg(hw, "nvm parameter(s) out of bounds\n");
@@ -1939,8 +1928,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
if (ret_val)
break;
- data[i] = (er32(EERD) >>
- E1000_NVM_RW_REG_DATA);
+ data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
}
return ret_val;
@@ -1964,8 +1952,10 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
s32 ret_val;
u16 widx = 0;
- /* A check for invalid values: offset too large, too many words,
- * and not enough words. */
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
(words == 0)) {
hw_dbg(hw, "nvm parameter(s) out of bounds\n");
@@ -1995,8 +1985,10 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
e1000_standby_nvm(hw);
- /* Some SPI eeproms use the 8th address bit embedded in the
- * opcode */
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
if ((nvm->address_bits == 8) && (offset >= 128))
write_opcode |= NVM_A8_OPCODE_SPI;
@@ -2041,9 +2033,9 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
/* Check for an alternate MAC address. An alternate MAC
* address can be setup by pre-boot software and must be
* treated like a permanent address and must override the
- * actual permanent MAC address. */
+ * actual permanent MAC address.*/
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &mac_addr_offset);
+ &mac_addr_offset);
if (ret_val) {
hw_dbg(hw, "NVM Read Error\n");
return ret_val;
@@ -2056,7 +2048,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
mac_addr_offset += ETH_ALEN/sizeof(u16);
/* make sure we have a valid mac address here
- * before using it */
+ * before using it */
ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
&nvm_data);
if (ret_val) {
@@ -2068,7 +2060,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
}
if (mac_addr_offset)
- hw->dev_spec.e82571.alt_mac_addr_is_present = 1;
+ hw->dev_spec.e82571.alt_mac_addr_is_present = 1;
}
for (i = 0; i < ETH_ALEN; i += 2) {
@@ -2244,7 +2236,7 @@ bool e1000e_check_mng_mode(struct e1000_hw *hw)
}
/**
- * e1000e_enable_tx_pkt_filtering - Enable packet filtering on TX
+ * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
* @hw: pointer to the HW structure
*
* Enables packet filtering on transmit packets if manageability is enabled
@@ -2264,7 +2256,8 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
return 0;
}
- /* If we can't read from the host interface for whatever
+ /*
+ * If we can't read from the host interface for whatever
* reason, disable filtering.
*/
ret_val = e1000_mng_enable_host_if(hw);
@@ -2282,7 +2275,8 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
hdr->checksum = 0;
csum = e1000_calculate_checksum((u8 *)hdr,
E1000_MNG_DHCP_COOKIE_LENGTH);
- /* If either the checksums or signature don't match, then
+ /*
+ * If either the checksums or signature don't match, then
* the cookie area isn't considered valid, in which case we
* take the safe route of assuming Tx filtering is enabled.
*/
@@ -2374,8 +2368,10 @@ static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
/* Calculate length in DWORDs */
length >>= 2;
- /* The device driver writes the relevant command block into the
- * ram area. */
+ /*
+ * The device driver writes the relevant command block into the
+ * ram area.
+ */
for (i = 0; i < length; i++) {
for (j = 0; j < sizeof(u32); j++) {
*(tmp + j) = *bufptr++;
@@ -2481,7 +2477,7 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
return ret_val;
}
-s32 e1000e_read_part_num(struct e1000_hw *hw, u32 *part_num)
+s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num)
{
s32 ret_val;
u16 nvm_data;
@@ -2491,14 +2487,14 @@ s32 e1000e_read_part_num(struct e1000_hw *hw, u32 *part_num)
hw_dbg(hw, "NVM Read Error\n");
return ret_val;
}
- *part_num = (u32)(nvm_data << 16);
+ *pba_num = (u32)(nvm_data << 16);
ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
if (ret_val) {
hw_dbg(hw, "NVM Read Error\n");
return ret_val;
}
- *part_num |= nvm_data;
+ *pba_num |= nvm_data;
return 0;
}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index fc5c63f4f5788d8de908e1c72d167a0f96bc6938..c8dc47fd132a47e74401a0c103efb23a18b97934 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -82,7 +82,7 @@ static int e1000_desc_unused(struct e1000_ring *ring)
}
/**
- * e1000_receive_skb - helper function to handle rx indications
+ * e1000_receive_skb - helper function to handle Rx indications
* @adapter: board private structure
* @status: descriptor status field as written by hardware
* @vlan: descriptor vlan field as written by hardware (no le/be conversion)
@@ -138,8 +138,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
/* TCP checksum is good */
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else {
- /* IP fragment with UDP payload */
- /* Hardware complements the payload checksum, so we undo it
+ /*
+ * IP fragment with UDP payload
+ * Hardware complements the payload checksum, so we undo it
* and then put the value in host order for further stack use.
*/
__sum16 sum = (__force __sum16)htons(csum);
@@ -182,7 +183,8 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
break;
}
- /* Make buffer alignment 2 beyond a 16 byte boundary
+ /*
+ * Make buffer alignment 2 beyond a 16 byte boundary
* this will result in a 16 byte aligned IP header after
* the 14 byte MAC header is removed
*/
@@ -213,10 +215,12 @@ map_skb:
if (i-- == 0)
i = (rx_ring->count - 1);
- /* Force memory writes to complete before letting h/w
+ /*
+ * Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
@@ -285,7 +289,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
break;
}
- /* Make buffer alignment 2 beyond a 16 byte boundary
+ /*
+ * Make buffer alignment 2 beyond a 16 byte boundary
* this will result in a 16 byte aligned IP header after
* the 14 byte MAC header is removed
*/
@@ -319,12 +324,15 @@ no_buffers:
if (!(i--))
i = (rx_ring->count - 1);
- /* Force memory writes to complete before letting h/w
+ /*
+ * Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
- /* Hardware increments by 16 bytes, but packet split
+ /*
+ * Hardware increments by 16 bytes, but packet split
* descriptors are 32 bytes...so we increment tail
* twice as much.
*/
@@ -409,9 +417,11 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
total_rx_bytes += length;
total_rx_packets++;
- /* code added for copybreak, this should improve
+ /*
+ * code added for copybreak, this should improve
* performance for small packets with large amounts
- * of reassembly being done in the stack */
+ * of reassembly being done in the stack
+ */
if (length < copybreak) {
struct sk_buff *new_skb =
netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
@@ -581,14 +591,15 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
}
if (adapter->detect_tx_hung) {
- /* Detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i */
+ /*
+ * Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i
+ */
adapter->detect_tx_hung = 0;
if (tx_ring->buffer_info[eop].dma &&
time_after(jiffies, tx_ring->buffer_info[eop].time_stamp
+ (adapter->tx_timeout_factor * HZ))
- && !(er32(STATUS) &
- E1000_STATUS_TXOFF)) {
+ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
e1000_print_tx_hang(adapter);
netif_stop_queue(netdev);
}
@@ -677,21 +688,28 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
skb_put(skb, length);
{
- /* this looks ugly, but it seems compiler issues make it
- more efficient than reusing j */
+ /*
+ * this looks ugly, but it seems compiler issues make it
+ * more efficient than reusing j
+ */
int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
- /* page alloc/put takes too long and effects small packet
- * throughput, so unsplit small packets and save the alloc/put*/
+ /*
+ * page alloc/put takes too long and effects small packet
+ * throughput, so unsplit small packets and save the alloc/put
+ * only valid in softirq (napi) context to call kmap_*
+ */
if (l1 && (l1 <= copybreak) &&
((length + l1) <= adapter->rx_ps_bsize0)) {
u8 *vaddr;
ps_page = &buffer_info->ps_pages[0];
- /* there is no documentation about how to call
+ /*
+ * there is no documentation about how to call
* kmap_atomic, so we can't hold the mapping
- * very long */
+ * very long
+ */
pci_dma_sync_single_for_cpu(pdev, ps_page->dma,
PAGE_SIZE, PCI_DMA_FROMDEVICE);
vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
@@ -836,26 +854,31 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
struct e1000_hw *hw = &adapter->hw;
u32 icr = er32(ICR);
- /* read ICR disables interrupts using IAM, so keep up with our
- * enable/disable accounting */
- atomic_inc(&adapter->irq_sem);
+ /*
+ * read ICR disables interrupts using IAM
+ */
if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
hw->mac.get_link_status = 1;
- /* ICH8 workaround-- Call gig speed drop workaround on cable
- * disconnect (LSC) before accessing any PHY registers */
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ * disconnect (LSC) before accessing any PHY registers
+ */
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
e1000e_gig_downshift_workaround_ich8lan(hw);
- /* 80003ES2LAN workaround-- For packet buffer work-around on
+ /*
+ * 80003ES2LAN workaround-- For packet buffer work-around on
* link down event; disable receives here in the ISR and reset
- * adapter in watchdog */
+ * adapter in watchdog
+ */
if (netif_carrier_ok(netdev) &&
adapter->flags & FLAG_RX_NEEDS_RESTART) {
/* disable receives */
u32 rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ adapter->flags |= FLAG_RX_RESTART_NOW;
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -868,8 +891,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
__netif_rx_schedule(netdev, &adapter->napi);
- } else {
- atomic_dec(&adapter->irq_sem);
}
return IRQ_HANDLED;
@@ -890,26 +911,31 @@ static irqreturn_t e1000_intr(int irq, void *data)
if (!icr)
return IRQ_NONE; /* Not our interrupt */
- /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
- * not set, then the adapter didn't send an interrupt */
+ /*
+ * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt
+ */
if (!(icr & E1000_ICR_INT_ASSERTED))
return IRQ_NONE;
- /* Interrupt Auto-Mask...upon reading ICR,
+ /*
+ * Interrupt Auto-Mask...upon reading ICR,
* interrupts are masked. No need for the
- * IMC write, but it does mean we should
- * account for it ASAP. */
- atomic_inc(&adapter->irq_sem);
+ * IMC write
+ */
if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
hw->mac.get_link_status = 1;
- /* ICH8 workaround-- Call gig speed drop workaround on cable
- * disconnect (LSC) before accessing any PHY registers */
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ * disconnect (LSC) before accessing any PHY registers
+ */
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
e1000e_gig_downshift_workaround_ich8lan(hw);
- /* 80003ES2LAN workaround--
+ /*
+ * 80003ES2LAN workaround--
* For packet buffer work-around on link down event;
* disable receives here in the ISR and
* reset adapter in watchdog
@@ -919,6 +945,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
/* disable receives */
rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ adapter->flags |= FLAG_RX_RESTART_NOW;
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -931,8 +958,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
__netif_rx_schedule(netdev, &adapter->napi);
- } else {
- atomic_dec(&adapter->irq_sem);
}
return IRQ_HANDLED;
@@ -983,7 +1008,6 @@ static void e1000_irq_disable(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- atomic_inc(&adapter->irq_sem);
ew32(IMC, ~0);
e1e_flush();
synchronize_irq(adapter->pdev->irq);
@@ -996,10 +1020,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- if (atomic_dec_and_test(&adapter->irq_sem)) {
- ew32(IMS, IMS_ENABLE_MASK);
- e1e_flush();
- }
+ ew32(IMS, IMS_ENABLE_MASK);
+ e1e_flush();
}
/**
@@ -1023,8 +1045,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
} else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT,
- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
}
}
@@ -1050,8 +1071,7 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter)
ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
} else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT,
- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
}
}
@@ -1353,9 +1373,11 @@ static void e1000_set_itr(struct e1000_adapter *adapter)
set_itr_now:
if (new_itr != adapter->itr) {
- /* this attempts to bias the interrupt rate towards Bulk
+ /*
+ * this attempts to bias the interrupt rate towards Bulk
* by adding intermediate steps when interrupt rate is
- * increasing */
+ * increasing
+ */
new_itr = new_itr > adapter->itr ?
min(adapter->itr + (new_itr >> 2), new_itr) :
new_itr;
@@ -1366,7 +1388,7 @@ set_itr_now:
/**
* e1000_clean - NAPI Rx polling callback
- * @adapter: board private structure
+ * @napi: struct associated with this polling callback
* @budget: amount of packets driver is allowed to process this poll
**/
static int e1000_clean(struct napi_struct *napi, int budget)
@@ -1378,10 +1400,12 @@ static int e1000_clean(struct napi_struct *napi, int budget)
/* Must NOT use netdev_priv macro here. */
adapter = poll_dev->priv;
- /* e1000_clean is called per-cpu. This lock protects
+ /*
+ * e1000_clean is called per-cpu. This lock protects
* tx_ring from being cleaned by multiple cpus
* simultaneously. A failure obtaining the lock means
- * tx_ring is currently being cleaned anyway. */
+ * tx_ring is currently being cleaned anyway.
+ */
if (spin_trylock(&adapter->tx_queue_lock)) {
tx_cleaned = e1000_clean_tx_irq(adapter);
spin_unlock(&adapter->tx_queue_lock);
@@ -1427,9 +1451,12 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
struct e1000_hw *hw = &adapter->hw;
u32 vfta, index;
- e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
vlan_group_set_device(adapter->vlgrp, vid, NULL);
- e1000_irq_enable(adapter);
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
@@ -1480,7 +1507,8 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
u32 ctrl, rctl;
- e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
adapter->vlgrp = grp;
if (grp) {
@@ -1517,7 +1545,8 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
}
}
- e1000_irq_enable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
}
static void e1000_restore_vlan(struct e1000_adapter *adapter)
@@ -1546,9 +1575,11 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
manc = er32(MANC);
- /* enable receiving management packets to the host. this will probably
+ /*
+ * enable receiving management packets to the host. this will probably
* generate destination unreachable messages from the host OS, but
- * the packets will be handled on SMBUS */
+ * the packets will be handled on SMBUS
+ */
manc |= E1000_MANC_EN_MNG2HOST;
manc2h = er32(MANC2H);
#define E1000_MNG2HOST_PORT_623 (1 << 5)
@@ -1598,7 +1629,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
- /* tx irq moderation */
+ /* Tx irq moderation */
ew32(TADV, adapter->tx_abs_int_delay);
/* Program the Transmit Control Register */
@@ -1608,22 +1639,24 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
- tarc = er32(TARC0);
- /* set the speed mode bit, we'll clear it if we're not at
- * gigabit link later */
+ tarc = er32(TARC(0));
+ /*
+ * set the speed mode bit, we'll clear it if we're not at
+ * gigabit link later
+ */
#define SPEED_MODE_BIT (1 << 21)
tarc |= SPEED_MODE_BIT;
- ew32(TARC0, tarc);
+ ew32(TARC(0), tarc);
}
/* errata: program both queues to unweighted RR */
if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
- tarc = er32(TARC0);
+ tarc = er32(TARC(0));
tarc |= 1;
- ew32(TARC0, tarc);
- tarc = er32(TARC1);
+ ew32(TARC(0), tarc);
+ tarc = er32(TARC(1));
tarc |= 1;
- ew32(TARC1, tarc);
+ ew32(TARC(1), tarc);
}
e1000e_config_collision_dist(hw);
@@ -1731,8 +1764,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
/* Configure extra packet-split registers */
rfctl = er32(RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
- /* disable packet split support for IPv6 extension headers,
- * because some malformed IPv6 headers can hang the RX */
+ /*
+ * disable packet split support for IPv6 extension headers,
+ * because some malformed IPv6 headers can hang the Rx
+ */
rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
E1000_RFCTL_NEW_IPV6_EXT_DIS);
@@ -1761,6 +1796,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
}
ew32(RCTL, rctl);
+ /* just started the receive unit, no need to restart */
+ adapter->flags &= ~FLAG_RX_RESTART_NOW;
}
/**
@@ -1801,8 +1838,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/* irq moderation */
ew32(RADV, adapter->rx_abs_int_delay);
if (adapter->itr_setting != 0)
- ew32(ITR,
- 1000000000 / (adapter->itr * 256));
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
ctrl_ext = er32(CTRL_EXT);
/* Reset delay timers after every interrupt */
@@ -1813,8 +1849,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
ew32(CTRL_EXT, ctrl_ext);
e1e_flush();
- /* Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring */
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
rdba = rx_ring->dma;
ew32(RDBAL, (rdba & DMA_32BIT_MASK));
ew32(RDBAH, (rdba >> 32));
@@ -1829,8 +1867,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
rxcsum |= E1000_RXCSUM_TUOFL;
- /* IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split. */
+ /*
+ * IPv4 payload checksum for UDP fragments must be
+ * used in conjunction with packet-split.
+ */
if (adapter->rx_ps_pages)
rxcsum |= E1000_RXCSUM_IPPCSE;
} else {
@@ -1839,9 +1879,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
ew32(RXCSUM, rxcsum);
- /* Enable early receives on supported devices, only takes effect when
+ /*
+ * Enable early receives on supported devices, only takes effect when
* packet size is equal or larger than the specified value (in 8 byte
- * units), e.g. using jumbo frames when setting to E1000_ERT_2048 */
+ * units), e.g. using jumbo frames when setting to E1000_ERT_2048
+ */
if ((adapter->flags & FLAG_HAS_ERT) &&
(adapter->netdev->mtu > ETH_DATA_LEN))
ew32(ERT, E1000_ERT_2048);
@@ -1851,7 +1893,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
/**
- * e1000_mc_addr_list_update - Update Multicast addresses
+ * e1000_update_mc_addr_list - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
@@ -1865,11 +1907,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
* exists and all implementations are handled in the generic version of this
* function.
**/
-static void e1000_mc_addr_list_update(struct e1000_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, u32 rar_used_count,
- u32 rar_count)
+static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, u32 rar_used_count,
+ u32 rar_count)
{
- hw->mac.ops.mc_addr_list_update(hw, mc_addr_list, mc_addr_count,
+ hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count,
rar_used_count, rar_count);
}
@@ -1923,7 +1965,7 @@ static void e1000_set_multi(struct net_device *netdev)
mc_ptr = mc_ptr->next;
}
- e1000_mc_addr_list_update(hw, mta_list, i, 1,
+ e1000_update_mc_addr_list(hw, mta_list, i, 1,
mac->rar_entry_count);
kfree(mta_list);
} else {
@@ -1931,13 +1973,12 @@ static void e1000_set_multi(struct net_device *netdev)
* if we're called from probe, we might not have
* anything to do here, so clear out the list
*/
- e1000_mc_addr_list_update(hw, NULL, 0, 1,
- mac->rar_entry_count);
+ e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count);
}
}
/**
- * e1000_configure - configure the hardware for RX and TX
+ * e1000_configure - configure the hardware for Rx and Tx
* @adapter: private board structure
**/
static void e1000_configure(struct e1000_adapter *adapter)
@@ -1950,8 +1991,7 @@ static void e1000_configure(struct e1000_adapter *adapter)
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- adapter->alloc_rx_buf(adapter,
- e1000_desc_unused(adapter->rx_ring));
+ adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
}
/**
@@ -1967,9 +2007,11 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
u16 mii_reg = 0;
/* Just clear the power down bit to wake the phy back up */
- if (adapter->hw.media_type == e1000_media_type_copper) {
- /* according to the manual, the phy will retain its
- * settings across a power-down/up cycle */
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+ /*
+ * According to the manual, the phy will retain its
+ * settings across a power-down/up cycle
+ */
e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg);
@@ -1994,12 +2036,11 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
return;
/* non-copper PHY? */
- if (adapter->hw.media_type != e1000_media_type_copper)
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
return;
/* reset is blocked because of a SoL/IDER session */
- if (e1000e_check_mng_mode(hw) ||
- e1000_check_reset_block(hw))
+ if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw))
return;
/* manageability (AMT) is enabled */
@@ -2019,51 +2060,61 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
* This function boots the hardware and enables some settings that
* require a configuration cycle of the hardware - those cannot be
* set/changed during runtime. After reset the device needs to be
- * properly configured for rx, tx etc.
+ * properly configured for Rx, Tx etc.
*/
void e1000e_reset(struct e1000_adapter *adapter)
{
struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct e1000_fc_info *fc = &adapter->hw.fc;
struct e1000_hw *hw = &adapter->hw;
u32 tx_space, min_tx_space, min_rx_space;
- u32 pba;
+ u32 pba = adapter->pba;
u16 hwm;
- ew32(PBA, adapter->pba);
+ /* reset Packet Buffer Allocation to default */
+ ew32(PBA, pba);
- if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) {
- /* To maintain wire speed transmits, the Tx FIFO should be
+ if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /*
+ * To maintain wire speed transmits, the Tx FIFO should be
* large enough to accommodate two full transmit packets,
* rounded up to the next 1KB and expressed in KB. Likewise,
* the Rx FIFO should be large enough to accommodate at least
* one full receive packet and is similarly rounded up and
- * expressed in KB. */
+ * expressed in KB.
+ */
pba = er32(PBA);
/* upper 16 bits has Tx packet buffer allocation size in KB */
tx_space = pba >> 16;
/* lower 16 bits has Rx packet buffer allocation size in KB */
pba &= 0xffff;
- /* the tx fifo also stores 16 bytes of information about the tx
- * but don't include ethernet FCS because hardware appends it */
- min_tx_space = (mac->max_frame_size +
+ /*
+ * the Tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (adapter->max_frame_size +
sizeof(struct e1000_tx_desc) -
ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
/* software strips receive CRC, so leave room for it */
- min_rx_space = mac->max_frame_size;
+ min_rx_space = adapter->max_frame_size;
min_rx_space = ALIGN(min_rx_space, 1024);
min_rx_space >>= 10;
- /* If current Tx allocation is less than the min Tx FIFO size,
+ /*
+ * If current Tx allocation is less than the min Tx FIFO size,
* and the min Tx FIFO size is less than the current Rx FIFO
- * allocation, take space away from current Rx allocation */
+ * allocation, take space away from current Rx allocation
+ */
if ((tx_space < min_tx_space) &&
((min_tx_space - tx_space) < pba)) {
pba -= min_tx_space - tx_space;
- /* if short on rx space, rx wins and must trump tx
- * adjustment or use Early Receive if available */
+ /*
+ * if short on Rx space, Rx wins and must trump tx
+ * adjustment or use Early Receive if available
+ */
if ((pba < min_rx_space) &&
(!(adapter->flags & FLAG_HAS_ERT)))
/* ERT enabled in e1000_configure_rx */
@@ -2074,29 +2125,33 @@ void e1000e_reset(struct e1000_adapter *adapter)
}
- /* flow control settings */
- /* The high water mark must be low enough to fit one full frame
+ /*
+ * flow control settings
+ *
+ * The high water mark must be low enough to fit one full frame
* (or the size used for early receive) above it in the Rx FIFO.
* Set it to the lower of:
* - 90% of the Rx FIFO size, and
* - the full Rx FIFO size minus the early receive size (for parts
* with ERT support assuming ERT set to E1000_ERT_2048), or
- * - the full Rx FIFO size minus one full frame */
+ * - the full Rx FIFO size minus one full frame
+ */
if (adapter->flags & FLAG_HAS_ERT)
- hwm = min(((adapter->pba << 10) * 9 / 10),
- ((adapter->pba << 10) - (E1000_ERT_2048 << 3)));
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - (E1000_ERT_2048 << 3)));
else
- hwm = min(((adapter->pba << 10) * 9 / 10),
- ((adapter->pba << 10) - mac->max_frame_size));
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
- mac->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
- mac->fc_low_water = mac->fc_high_water - 8;
+ fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
- mac->fc_pause_time = 0xFFFF;
+ fc->pause_time = 0xFFFF;
else
- mac->fc_pause_time = E1000_FC_PAUSE_TIME;
- mac->fc = mac->original_fc;
+ fc->pause_time = E1000_FC_PAUSE_TIME;
+ fc->send_xon = 1;
+ fc->type = fc->original_type;
/* Allow time for pending master requests to run */
mac->ops.reset_hw(hw);
@@ -2115,9 +2170,11 @@ void e1000e_reset(struct e1000_adapter *adapter)
if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
u16 phy_data = 0;
- /* speed up time to link by disabling smart power down, ignore
+ /*
+ * speed up time to link by disabling smart power down, ignore
* the return value of this function because there is nothing
- * different we would do if it failed */
+ * different we would do if it failed
+ */
e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
@@ -2147,8 +2204,10 @@ void e1000e_down(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
u32 tctl, rctl;
- /* signal that we're down so the interrupt handler does not
- * reschedule our watchdog timer */
+ /*
+ * signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
set_bit(__E1000_DOWN, &adapter->state);
/* disable receives in the hardware */
@@ -2167,7 +2226,6 @@ void e1000e_down(struct e1000_adapter *adapter)
msleep(10);
napi_disable(&adapter->napi);
- atomic_set(&adapter->irq_sem, 0);
e1000_irq_disable(adapter);
del_timer_sync(&adapter->watchdog_timer);
@@ -2208,13 +2266,12 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
**/
static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
{
- struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
adapter->rx_ps_bsize0 = 128;
- hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
if (!adapter->tx_ring)
@@ -2227,7 +2284,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
spin_lock_init(&adapter->tx_queue_lock);
/* Explicitly disable IRQ since the NIC can be in any state. */
- atomic_set(&adapter->irq_sem, 0);
e1000_irq_disable(adapter);
spin_lock_init(&adapter->stats_lock);
@@ -2281,16 +2337,20 @@ static int e1000_open(struct net_device *netdev)
E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
e1000_update_mng_vlan(adapter);
- /* If AMT is enabled, let the firmware know that the network
- * interface is now open */
+ /*
+ * If AMT is enabled, let the firmware know that the network
+ * interface is now open
+ */
if ((adapter->flags & FLAG_HAS_AMT) &&
e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
- /* before we allocate an interrupt, we must be ready to handle it.
+ /*
+ * before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
* as soon as we call pci_request_irq, so we have to setup our
- * clean_rx handler before we do so. */
+ * clean_rx handler before we do so.
+ */
e1000_configure(adapter);
err = e1000_request_irq(adapter);
@@ -2344,16 +2404,20 @@ static int e1000_close(struct net_device *netdev)
e1000e_free_tx_resources(adapter);
e1000e_free_rx_resources(adapter);
- /* kill manageability vlan ID if supported, but not if a vlan with
- * the same ID is registered on the host OS (let 8021q kill it) */
+ /*
+ * kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it)
+ */
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
!(adapter->vlgrp &&
vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- /* If AMT is enabled, let the firmware know that the network
- * interface is now closed */
+ /*
+ * If AMT is enabled, let the firmware know that the network
+ * interface is now closed
+ */
if ((adapter->flags & FLAG_HAS_AMT) &&
e1000e_check_mng_mode(&adapter->hw))
e1000_release_hw_control(adapter);
@@ -2384,12 +2448,14 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
/* activate the work around */
e1000e_set_laa_state_82571(&adapter->hw, 1);
- /* Hold a copy of the LAA in RAR[14] This is done so that
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
* between the time RAR[0] gets clobbered and the time it
* gets fixed (in e1000_watchdog), the actual LAA is in one
* of the RARs and no incoming packets directed to this port
* are dropped. Eventually the LAA will be in RAR[0] and
- * RAR[14] */
+ * RAR[14]
+ */
e1000e_rar_set(&adapter->hw,
adapter->hw.mac.addr,
adapter->hw.mac.rar_entry_count - 1);
@@ -2398,8 +2464,10 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
return 0;
}
-/* Need to wait a few seconds after link up to get diagnostic information from
- * the phy */
+/*
+ * Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ */
static void e1000_update_phy_info(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
@@ -2430,7 +2498,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
spin_lock_irqsave(&adapter->stats_lock, irq_flags);
- /* these counters are modified from e1000_adjust_tbi_stats,
+ /*
+ * these counters are modified from e1000_adjust_tbi_stats,
* called from the interrupt context, so they must only
* be written while holding adapter->stats_lock
*/
@@ -2524,8 +2593,10 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
/* Rx Errors */
- /* RLEC on some newer hardware can be incorrect so build
- * our own version based on RUC and ROC */
+ /*
+ * RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
adapter->net_stats.rx_errors = adapter->stats.rxerrc +
adapter->stats.crcerrs + adapter->stats.algnerrc +
adapter->stats.ruc + adapter->stats.roc +
@@ -2546,7 +2617,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
/* Tx Dropped needs to be maintained elsewhere */
/* Phy Stats */
- if (hw->media_type == e1000_media_type_copper) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
if ((adapter->link_speed == SPEED_1000) &&
(!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) {
phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
@@ -2564,8 +2635,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
- struct net_device *netdev = adapter->netdev;
struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
u32 ctrl = er32(CTRL);
ndev_info(netdev,
@@ -2579,6 +2650,62 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
}
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = 0;
+ s32 ret_val = 0;
+
+ /*
+ * get_link_status is set on LSC (link status) interrupt or
+ * Rx sequence error interrupt. get_link_status will stay
+ * false until the check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (hw->mac.get_link_status) {
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ } else {
+ link_active = 1;
+ }
+ break;
+ case e1000_media_type_fiber:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = adapter->hw.mac.serdes_has_link;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+ (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
+ ndev_info(adapter->netdev,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
+
+ return link_active;
+}
+
+static void e1000e_enable_receives(struct e1000_adapter *adapter)
+{
+ /* make sure the receive unit is started */
+ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
+ (adapter->flags & FLAG_RX_RESTART_NOW)) {
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ adapter->flags &= ~FLAG_RX_RESTART_NOW;
+ }
+}
+
/**
* e1000_watchdog - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
@@ -2597,48 +2724,35 @@ static void e1000_watchdog_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter, watchdog_task);
-
struct net_device *netdev = adapter->netdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_hw *hw = &adapter->hw;
u32 link, tctl;
- s32 ret_val;
int tx_pending = 0;
- if ((netif_carrier_ok(netdev)) &&
- (er32(STATUS) & E1000_STATUS_LU))
+ link = e1000_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link) {
+ e1000e_enable_receives(adapter);
goto link_up;
-
- ret_val = mac->ops.check_for_link(hw);
- if ((ret_val == E1000_ERR_PHY) &&
- (adapter->hw.phy.type == e1000_phy_igp_3) &&
- (er32(CTRL) &
- E1000_PHY_CTRL_GBE_DISABLE)) {
- /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- ndev_info(netdev,
- "Gigabit has been disabled, downgrading speed\n");
}
if ((e1000e_enable_tx_pkt_filtering(hw)) &&
(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
e1000_update_mng_vlan(adapter);
- if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
- !(er32(TXCW) & E1000_TXCW_ANE))
- link = adapter->hw.mac.serdes_has_link;
- else
- link = er32(STATUS) & E1000_STATUS_LU;
-
if (link) {
if (!netif_carrier_ok(netdev)) {
bool txb2b = 1;
+ /* update snapshot of PHY registers on LSC */
mac->ops.get_link_up_info(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
e1000_print_link_info(adapter);
- /* tweak tx_queue_len according to speed/duplex
- * and adjust the timeout factor */
+ /*
+ * tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor
+ */
netdev->tx_queue_len = adapter->tx_queue_len;
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
@@ -2654,18 +2768,22 @@ static void e1000_watchdog_task(struct work_struct *work)
break;
}
- /* workaround: re-program speed mode bit after
- * link-up event */
+ /*
+ * workaround: re-program speed mode bit after
+ * link-up event
+ */
if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
!txb2b) {
u32 tarc0;
- tarc0 = er32(TARC0);
+ tarc0 = er32(TARC(0));
tarc0 &= ~SPEED_MODE_BIT;
- ew32(TARC0, tarc0);
+ ew32(TARC(0), tarc0);
}
- /* disable TSO for pcie and 10/100 speeds, to avoid
- * some hardware issues */
+ /*
+ * disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues
+ */
if (!(adapter->flags & FLAG_TSO_FORCE)) {
switch (adapter->link_speed) {
case SPEED_10:
@@ -2685,8 +2803,10 @@ static void e1000_watchdog_task(struct work_struct *work)
}
}
- /* enable transmits in the hardware, need to do this
- * after setting TARC0 */
+ /*
+ * enable transmits in the hardware, need to do this
+ * after setting TARC(0)
+ */
tctl = er32(TCTL);
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
@@ -2697,13 +2817,6 @@ static void e1000_watchdog_task(struct work_struct *work)
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
- } else {
- /* make sure the receive unit is started */
- if (adapter->flags & FLAG_RX_NEEDS_RESTART) {
- u32 rctl = er32(RCTL);
- ew32(RCTL, rctl |
- E1000_RCTL_EN);
- }
}
} else {
if (netif_carrier_ok(netdev)) {
@@ -2740,23 +2853,27 @@ link_up:
tx_pending = (e1000_desc_unused(tx_ring) + 1 <
tx_ring->count);
if (tx_pending) {
- /* We've lost link, so the controller stops DMA,
+ /*
+ * We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
* to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context). */
+ * (Do the reset outside of interrupt context).
+ */
adapter->tx_timeout_count++;
schedule_work(&adapter->reset_task);
}
}
- /* Cause software interrupt to ensure rx ring is cleaned */
+ /* Cause software interrupt to ensure Rx ring is cleaned */
ew32(ICS, E1000_ICS_RXDMT0);
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
- /* With 82571 controllers, LAA may be overwritten due to controller
- * reset from the other port. Set the appropriate LAA in RAR[0] */
+ /*
+ * With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0]
+ */
if (e1000e_get_laa_state_82571(hw))
e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
@@ -3032,16 +3149,20 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
- /* Force memory writes to complete before letting h/w
+ /*
+ * Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
tx_ring->next_to_use = i;
writel(i, adapter->hw.hw_addr + tx_ring->tail);
- /* we need this if more than one processor can write to our tail
- * at a time, it synchronizes IO on IA64/Altix systems */
+ /*
+ * we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
mmiowb();
}
@@ -3089,13 +3210,17 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
struct e1000_adapter *adapter = netdev_priv(netdev);
netif_stop_queue(netdev);
- /* Herbert's original patch had:
+ /*
+ * Herbert's original patch had:
* smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
+ * but since that doesn't exist yet, just open code it.
+ */
smp_mb();
- /* We need to check again in a case another CPU has just
- * made room available. */
+ /*
+ * We need to check again in a case another CPU has just
+ * made room available.
+ */
if (e1000_desc_unused(adapter->tx_ring) < size)
return -EBUSY;
@@ -3142,21 +3267,29 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
mss = skb_shinfo(skb)->gso_size;
- /* The controller does a simple calculation to
+ /*
+ * The controller does a simple calculation to
* make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't
* overrun the FIFO, adjust the max buffer len if mss
- * drops. */
+ * drops.
+ */
if (mss) {
u8 hdr_len;
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
- /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
- * points to just header, pull a few bytes of payload from
- * frags into skb->data */
+ /*
+ * TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data
+ */
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ /*
+ * we do this workaround for ES2LAN, but it is un-necessary,
+ * avoiding it could save a lot of cycles
+ */
if (skb->data_len && (hdr_len == len)) {
unsigned int pull_size;
@@ -3190,8 +3323,10 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
/* Collision - tell upper layer to requeue */
return NETDEV_TX_LOCKED;
- /* need: count + 2 desc gap to keep tail from touching
- * head, otherwise try next time */
+ /*
+ * need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time
+ */
if (e1000_maybe_stop_tx(netdev, count + 2)) {
spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
return NETDEV_TX_BUSY;
@@ -3216,9 +3351,11 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
else if (e1000_tx_csum(adapter, skb))
tx_flags |= E1000_TX_FLAGS_CSUM;
- /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ /*
+ * Old method was to assume IPv4 packet by default if TSO was enabled.
* 82571 hardware supports TSO capabilities for IPv6 as well...
- * no longer assume, we must. */
+ * no longer assume, we must.
+ */
if (skb->protocol == htons(ETH_P_IP))
tx_flags |= E1000_TX_FLAGS_IPV4;
@@ -3316,14 +3453,16 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
msleep(1);
/* e1000e_down has a dependency on max_frame_size */
- adapter->hw.mac.max_frame_size = max_frame;
+ adapter->max_frame_size = max_frame;
if (netif_running(netdev))
e1000e_down(adapter);
- /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ /*
+ * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab */
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ */
if (max_frame <= 256)
adapter->rx_buffer_len = 256;
@@ -3340,7 +3479,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
(max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN ;
+ + ETH_FCS_LEN;
ndev_info(netdev, "changing MTU from %d to %d\n",
netdev->mtu, new_mtu);
@@ -3363,7 +3502,7 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
struct mii_ioctl_data *data = if_mii(ifr);
unsigned long irq_flags;
- if (adapter->hw.media_type != e1000_media_type_copper)
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
switch (cmd) {
@@ -3445,8 +3584,9 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
E1000_CTRL_EN_PHY_PWR_MGMT;
ew32(CTRL, ctrl);
- if (adapter->hw.media_type == e1000_media_type_fiber ||
- adapter->hw.media_type == e1000_media_type_internal_serdes) {
+ if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
+ adapter->hw.phy.media_type ==
+ e1000_media_type_internal_serdes) {
/* keep the laser running in D3 */
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
@@ -3476,8 +3616,10 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
e1000_release_hw_control(adapter);
pci_disable_device(pdev);
@@ -3552,9 +3694,11 @@ static int e1000_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
- /* If the controller has AMT, do not set DRV_LOAD until the interface
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver. */
+ * under the control of the driver.
+ */
if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
@@ -3665,9 +3809,11 @@ static void e1000_io_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
- /* If the controller has AMT, do not set DRV_LOAD until the interface
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver. */
+ * under the control of the driver.
+ */
if (!(adapter->flags & FLAG_HAS_AMT) ||
!e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
@@ -3678,7 +3824,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- u32 part_num;
+ u32 pba_num;
/* print bus type/speed/width info */
ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
@@ -3693,10 +3839,10 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
(hw->phy.type == e1000_phy_ife)
? "10/100" : "1000");
- e1000e_read_part_num(hw, &part_num);
+ e1000e_read_pba_num(hw, &pba_num);
ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
hw->mac.type, hw->phy.type,
- (part_num >> 8), (part_num & 0xff));
+ (pba_num >> 8), (pba_num & 0xff));
}
/**
@@ -3828,16 +3974,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
- err = ei->get_invariants(adapter);
+ err = ei->get_variants(adapter);
if (err)
goto err_hw_init;
hw->mac.ops.get_bus_info(&adapter->hw);
- adapter->hw.phy.wait_for_link = 0;
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
/* Copper options */
- if (adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
adapter->hw.phy.mdix = AUTO_ALL_MODES;
adapter->hw.phy.disable_polarity_correction = 0;
adapter->hw.phy.ms_type = e1000_ms_hw_default;
@@ -3861,15 +4007,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- /* We should not be using LLTX anymore, but we are still TX faster with
- * it. */
+ /*
+ * We should not be using LLTX anymore, but we are still Tx faster with
+ * it.
+ */
netdev->features |= NETIF_F_LLTX;
if (e1000e_enable_mng_pass_thru(&adapter->hw))
adapter->flags |= FLAG_MNG_PT_ENABLED;
- /* before reading the NVM, reset the controller to
- * put the device in a known good starting state */
+ /*
+ * before reading the NVM, reset the controller to
+ * put the device in a known good starting state
+ */
adapter->hw.mac.ops.reset_hw(&adapter->hw);
/*
@@ -3919,8 +4069,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
adapter->fc_autoneg = 1;
- adapter->hw.mac.original_fc = e1000_fc_default;
- adapter->hw.mac.fc = e1000_fc_default;
+ adapter->hw.fc.original_type = e1000_fc_default;
+ adapter->hw.fc.type = e1000_fc_default;
adapter->hw.phy.autoneg_advertised = 0x2f;
/* ring size defaults */
@@ -3963,9 +4113,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* reset the hardware with the new settings */
e1000e_reset(adapter);
- /* If the controller has AMT, do not set DRV_LOAD until the interface
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver. */
+ * under the control of the driver.
+ */
if (!(adapter->flags & FLAG_HAS_AMT) ||
!e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
@@ -4022,16 +4174,20 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- /* flush_scheduled work may reschedule our watchdog task, so
- * explicitly disable watchdog tasks from being rescheduled */
+ /*
+ * flush_scheduled work may reschedule our watchdog task, so
+ * explicitly disable watchdog tasks from being rescheduled
+ */
set_bit(__E1000_DOWN, &adapter->state);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
flush_scheduled_work();
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
e1000_release_hw_control(adapter);
unregister_netdev(netdev);
@@ -4069,13 +4225,16 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
board_80003es2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
@@ -4084,6 +4243,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
board_80003es2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
board_80003es2lan },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
@@ -4091,6 +4251,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
@@ -4108,7 +4269,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
@@ -4127,7 +4288,7 @@ static int __init e1000_init_module(void)
int ret;
printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
e1000e_driver_name, e1000e_driver_version);
- printk(KERN_INFO "%s: Copyright (c) 1999-2007 Intel Corporation.\n",
+ printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
e1000e_driver_name);
ret = pci_register_driver(&e1000_driver);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index df266c32ac4bc022fa6f5b75877e4ebd707315f5..a66b92efcf80c231a35694fe3b5fb63e3ca69f64 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -30,7 +30,8 @@
#include "e1000.h"
-/* This is the only thing that needs to be changed to adjust the
+/*
+ * This is the only thing that needs to be changed to adjust the
* maximum number of ports that the driver can manage.
*/
@@ -46,7 +47,8 @@ module_param(copybreak, uint, 0644);
MODULE_PARM_DESC(copybreak,
"Maximum size of packet that is copied to a new buffer on receive");
-/* All parameters are treated the same, as an integer array of values.
+/*
+ * All parameters are treated the same, as an integer array of values.
* This macro just reduces the need to repeat the same declaration code
* over and over (plus this helps to avoid typo bugs).
*/
@@ -60,8 +62,9 @@ MODULE_PARM_DESC(copybreak,
MODULE_PARM_DESC(X, desc);
-/* Transmit Interrupt Delay in units of 1.024 microseconds
- * Tx interrupt delay needs to typically be set to something non zero
+/*
+ * Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
*
* Valid Range: 0-65535
*/
@@ -70,7 +73,8 @@ E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
#define MAX_TXDELAY 0xFFFF
#define MIN_TXDELAY 0
-/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+/*
+ * Transmit Absolute Interrupt Delay in units of 1.024 microseconds
*
* Valid Range: 0-65535
*/
@@ -79,8 +83,9 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
#define MAX_TXABSDELAY 0xFFFF
#define MIN_TXABSDELAY 0
-/* Receive Interrupt Delay in units of 1.024 microseconds
- * hardware will likely hang if you set this to anything but zero.
+/*
+ * Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
*
* Valid Range: 0-65535
*/
@@ -89,7 +94,8 @@ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
#define MAX_RXDELAY 0xFFFF
#define MIN_RXDELAY 0
-/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+/*
+ * Receive Absolute Interrupt Delay in units of 1.024 microseconds
*
* Valid Range: 0-65535
*/
@@ -98,7 +104,8 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
#define MAX_RXABSDELAY 0xFFFF
#define MIN_RXABSDELAY 0
-/* Interrupt Throttle Rate (interrupts/sec)
+/*
+ * Interrupt Throttle Rate (interrupts/sec)
*
* Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
*/
@@ -107,7 +114,8 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define MAX_ITR 100000
#define MIN_ITR 100
-/* Enable Smart Power Down of the PHY
+/*
+ * Enable Smart Power Down of the PHY
*
* Valid Range: 0, 1
*
@@ -115,7 +123,8 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
*/
E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
-/* Enable Kumeran Lock Loss workaround
+/*
+ * Enable Kumeran Lock Loss workaround
*
* Valid Range: 0, 1
*
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index dab3c468a768c9a2093264886fb58fa81dea9eaf..3a4574caa75bb1fdcd824d5b3853141773fda532 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -134,7 +134,8 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
return -E1000_ERR_PARAM;
}
- /* Set up Op-code, Phy Address, and register offset in the MDI
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
@@ -144,7 +145,11 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
ew32(MDIC, mdic);
- /* Poll the ready bit to see if the MDI read completed */
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
for (i = 0; i < 64; i++) {
udelay(50);
mdic = er32(MDIC);
@@ -182,7 +187,8 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
return -E1000_ERR_PARAM;
}
- /* Set up Op-code, Phy Address, and register offset in the MDI
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
@@ -409,14 +415,15 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- /* Enable CRS on TX. This must be set for half-duplex operation. */
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
if (ret_val)
return ret_val;
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- /* Options:
+ /*
+ * Options:
* MDI/MDI-X = 0 (default)
* 0 - Auto for all speeds
* 1 - MDI mode
@@ -441,7 +448,8 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
break;
}
- /* Options:
+ /*
+ * Options:
* disable_polarity_correction = 0 (default)
* Automatic Correction for Reversed Cable Polarity
* 0 - Disabled
@@ -456,7 +464,8 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
return ret_val;
if (phy->revision < 4) {
- /* Force TX_CLK in the Extended PHY Specific Control Register
+ /*
+ * Force TX_CLK in the Extended PHY Specific Control Register
* to 25MHz clock.
*/
ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
@@ -543,19 +552,21 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
/* set auto-master slave resolution settings */
if (hw->mac.autoneg) {
- /* when autonegotiation advertisement is only 1000Mbps then we
+ /*
+ * when autonegotiation advertisement is only 1000Mbps then we
* should disable SmartSpeed and enable Auto MasterSlave
- * resolution as hardware default. */
+ * resolution as hardware default.
+ */
if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
/* Disable SmartSpeed */
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
@@ -630,14 +641,16 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
return ret_val;
}
- /* Need to parse both autoneg_advertised and fc and set up
+ /*
+ * Need to parse both autoneg_advertised and fc and set up
* the appropriate PHY registers. First we will parse for
* autoneg_advertised software override. Since we can advertise
* a plethora of combinations, we need to check each bit
* individually.
*/
- /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
* Advertisement Register (Address 4) and the 1000 mb speed bits in
* the 1000Base-T Control Register (Address 9).
*/
@@ -683,7 +696,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
}
- /* Check for a software override of the flow control settings, and
+ /*
+ * Check for a software override of the flow control settings, and
* setup the PHY advertisement registers accordingly. If
* auto-negotiation is enabled, then software will have to set the
* "PAUSE" bits to the correct value in the Auto-Negotiation
@@ -696,38 +710,42 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
* but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames
* but we do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
* other: No software override. The flow control configuration
* in the EEPROM is used.
*/
- switch (hw->mac.fc) {
+ switch (hw->fc.type) {
case e1000_fc_none:
- /* Flow control (RX & TX) is completely disabled by a
+ /*
+ * Flow control (Rx & Tx) is completely disabled by a
* software over-ride.
*/
mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
break;
case e1000_fc_rx_pause:
- /* RX Flow control is enabled, and TX Flow control is
+ /*
+ * Rx Flow control is enabled, and Tx Flow control is
* disabled, by a software over-ride.
- */
- /* Since there really isn't a way to advertise that we are
- * capable of RX Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric RX PAUSE. Later
+ *
+ * Since there really isn't a way to advertise that we are
+ * capable of Rx Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric Rx PAUSE. Later
* (in e1000e_config_fc_after_link_up) we will disable the
* hw's ability to send PAUSE frames.
*/
mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
break;
case e1000_fc_tx_pause:
- /* TX Flow control is enabled, and RX Flow control is
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
* disabled, by a software over-ride.
*/
mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
break;
case e1000_fc_full:
- /* Flow control (both RX and TX) is enabled by a software
+ /*
+ * Flow control (both Rx and Tx) is enabled by a software
* over-ride.
*/
mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
@@ -758,7 +776,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
* Performs initial bounds checking on autoneg advertisement parameter, then
* configure to advertise the full capability. Setup the PHY to autoneg
* and restart the negotiation process between the link partner. If
- * wait_for_link, then wait for autoneg to complete before exiting.
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
**/
static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
{
@@ -766,12 +784,14 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
s32 ret_val;
u16 phy_ctrl;
- /* Perform some bounds checking on the autoneg advertisement
+ /*
+ * Perform some bounds checking on the autoneg advertisement
* parameter.
*/
phy->autoneg_advertised &= phy->autoneg_mask;
- /* If autoneg_advertised is zero, we assume it was not defaulted
+ /*
+ * If autoneg_advertised is zero, we assume it was not defaulted
* by the calling code so we set to advertise full capability.
*/
if (phy->autoneg_advertised == 0)
@@ -785,7 +805,8 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
}
hw_dbg(hw, "Restarting Auto-Neg\n");
- /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ /*
+ * Restart auto-negotiation by setting the Auto Neg Enable bit and
* the Auto Neg Restart bit in the PHY control register.
*/
ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
@@ -797,10 +818,11 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Does the user want to wait for Auto-Neg to complete here, or
+ /*
+ * Does the user want to wait for Auto-Neg to complete here, or
* check at a later time (for example, callback routine).
*/
- if (phy->wait_for_link) {
+ if (phy->autoneg_wait_to_complete) {
ret_val = e1000_wait_autoneg(hw);
if (ret_val) {
hw_dbg(hw, "Error while waiting for "
@@ -829,14 +851,18 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
bool link;
if (hw->mac.autoneg) {
- /* Setup autoneg and flow control advertisement and perform
- * autonegotiation. */
+ /*
+ * Setup autoneg and flow control advertisement and perform
+ * autonegotiation.
+ */
ret_val = e1000_copper_link_autoneg(hw);
if (ret_val)
return ret_val;
} else {
- /* PHY will be set to 10H, 10F, 100H or 100F
- * depending on user settings. */
+ /*
+ * PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
hw_dbg(hw, "Forcing Speed and Duplex\n");
ret_val = e1000_phy_force_speed_duplex(hw);
if (ret_val) {
@@ -845,7 +871,8 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
}
}
- /* Check link status. Wait up to 100 microseconds for link to become
+ /*
+ * Check link status. Wait up to 100 microseconds for link to become
* valid.
*/
ret_val = e1000e_phy_has_link_generic(hw,
@@ -891,7 +918,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ /*
+ * Clear Auto-Crossover to force MDI manually. IGP requires MDI
* forced whenever speed and duplex are forced.
*/
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
@@ -909,7 +937,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
udelay(1);
- if (phy->wait_for_link) {
+ if (phy->autoneg_wait_to_complete) {
hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
ret_val = e1000e_phy_has_link_generic(hw,
@@ -941,7 +969,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
* Calls the PHY setup function to force speed and duplex. Clears the
* auto-crossover to force MDI manually. Resets the PHY to commit the
* changes. If time expires while waiting for link up, we reset the DSP.
- * After reset, TX_CLK and CRS on TX must be set. Return successful upon
+ * After reset, TX_CLK and CRS on Tx must be set. Return successful upon
* successful completion, else return corresponding error code.
**/
s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
@@ -951,7 +979,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
u16 phy_data;
bool link;
- /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
* forced whenever speed and duplex are forced.
*/
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
@@ -980,7 +1009,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
udelay(1);
- if (phy->wait_for_link) {
+ if (phy->autoneg_wait_to_complete) {
hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -989,10 +1018,12 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
return ret_val;
if (!link) {
- /* We didn't get link.
+ /*
+ * We didn't get link.
* Reset the DSP and cross our fingers.
*/
- ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, 0x001d);
+ ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
if (ret_val)
return ret_val;
ret_val = e1000e_phy_reset_dsp(hw);
@@ -1011,7 +1042,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Resetting the phy means we need to re-force TX_CLK in the
+ /*
+ * Resetting the phy means we need to re-force TX_CLK in the
* Extended PHY Specific Control Register to 25MHz clock from
* the reset value of 2.5MHz.
*/
@@ -1020,7 +1052,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* In addition, we must re-enable CRS on Tx for both half and full
+ /*
+ * In addition, we must re-enable CRS on Tx for both half and full
* duplex.
*/
ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
@@ -1051,7 +1084,7 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
u32 ctrl;
/* Turn off flow control when forcing speed/duplex */
- mac->fc = e1000_fc_none;
+ hw->fc.type = e1000_fc_none;
/* Force speed/duplex on the mac */
ctrl = er32(CTRL);
@@ -1124,30 +1157,32 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
data);
if (ret_val)
return ret_val;
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
* important. During driver activity we should enable
- * SmartSpeed, so performance is maintained. */
+ * SmartSpeed, so performance is maintained.
+ */
if (phy->smart_speed == e1000_smart_speed_on) {
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ data);
if (ret_val)
return ret_val;
}
@@ -1249,8 +1284,10 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
s32 ret_val;
u16 data, offset, mask;
- /* Polarity is determined based on the speed of
- * our connection. */
+ /*
+ * Polarity is determined based on the speed of
+ * our connection.
+ */
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
if (ret_val)
return ret_val;
@@ -1260,7 +1297,8 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
offset = IGP01E1000_PHY_PCS_INIT_REG;
mask = IGP01E1000_PHY_POLARITY_MASK;
} else {
- /* This really only applies to 10Mbps since
+ /*
+ * This really only applies to 10Mbps since
* there is no polarity for 100Mbps (always 0).
*/
offset = IGP01E1000_PHY_PORT_STATUS;
@@ -1278,7 +1316,7 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
}
/**
- * e1000_wait_autoneg - Wait for auto-neg compeletion
+ * e1000_wait_autoneg - Wait for auto-neg completion
* @hw: pointer to the HW structure
*
* Waits for auto-negotiation to complete or for the auto-negotiation time
@@ -1302,7 +1340,8 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
msleep(100);
}
- /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+ /*
+ * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
* has completed.
*/
return ret_val;
@@ -1324,7 +1363,8 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u16 i, phy_status;
for (i = 0; i < iterations; i++) {
- /* Some PHYs require the PHY_STATUS register to be read
+ /*
+ * Some PHYs require the PHY_STATUS register to be read
* twice due to the link bit being sticky. No harm doing
* it across the board.
*/
@@ -1412,10 +1452,12 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- /* Getting bits 15:9, which represent the combination of
+ /*
+ * Getting bits 15:9, which represent the combination of
* course and fine gain values. The result is a number
* that can be put into the lookup table to obtain the
- * approximate cable length. */
+ * approximate cable length.
+ */
cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
IGP02E1000_AGC_LENGTH_MASK;
@@ -1466,7 +1508,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
u16 phy_data;
bool link;
- if (hw->media_type != e1000_media_type_copper) {
+ if (hw->phy.media_type != e1000_media_type_copper) {
hw_dbg(hw, "Phy info is only valid for copper media\n");
return -E1000_ERR_CONFIG;
}
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index a8d3280923e85483f386ecccee4908af2f8e87d8..f5dacceab95b35327fc87bda7583a4358479b405 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -422,7 +422,7 @@ struct ehea_fw_handle_entry {
struct ehea_fw_handle_array {
struct ehea_fw_handle_entry *arr;
int num_entries;
- struct semaphore lock;
+ struct mutex lock;
};
struct ehea_bcmc_reg_entry {
@@ -435,7 +435,7 @@ struct ehea_bcmc_reg_entry {
struct ehea_bcmc_reg_array {
struct ehea_bcmc_reg_entry *arr;
int num_entries;
- struct semaphore lock;
+ struct mutex lock;
};
#define EHEA_PORT_UP 1
@@ -453,7 +453,7 @@ struct ehea_port {
struct vlan_group *vgrp;
struct ehea_eq *qp_eq;
struct work_struct reset_task;
- struct semaphore port_lock;
+ struct mutex port_lock;
char int_aff_name[EHEA_IRQ_NAME_SIZE];
int allmulti; /* Indicates IFF_ALLMULTI state */
int promisc; /* Indicates IFF_PROMISC state */
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f460b623c0771356acca11780e06b62efac2e0c4..9ff7538b75952e94ef27d9660dd31fa00f75b605 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -36,6 +36,7 @@
#include
#include
#include
+#include
#include
@@ -99,7 +100,7 @@ static int port_name_cnt;
static LIST_HEAD(adapter_list);
u64 ehea_driver_flags;
struct work_struct ehea_rereg_mr_task;
-struct semaphore dlpar_mem_lock;
+static DEFINE_MUTEX(dlpar_mem_lock);
struct ehea_fw_handle_array ehea_fw_handles;
struct ehea_bcmc_reg_array ehea_bcmc_regs;
@@ -1761,7 +1762,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
- down(&ehea_bcmc_regs.lock);
+ mutex_lock(&ehea_bcmc_regs.lock);
/* Deregister old MAC in pHYP */
ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
@@ -1779,7 +1780,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
out_upregs:
ehea_update_bcmc_registrations();
- up(&ehea_bcmc_regs.lock);
+ mutex_unlock(&ehea_bcmc_regs.lock);
out_free:
kfree(cb0);
out:
@@ -1941,7 +1942,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
ehea_promiscuous(dev, 0);
- down(&ehea_bcmc_regs.lock);
+ mutex_lock(&ehea_bcmc_regs.lock);
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
@@ -1972,7 +1973,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
}
out:
ehea_update_bcmc_registrations();
- up(&ehea_bcmc_regs.lock);
+ mutex_unlock(&ehea_bcmc_regs.lock);
return;
}
@@ -2455,7 +2456,7 @@ static int ehea_up(struct net_device *dev)
if (port->state == EHEA_PORT_UP)
return 0;
- down(&ehea_fw_handles.lock);
+ mutex_lock(&ehea_fw_handles.lock);
ret = ehea_port_res_setup(port, port->num_def_qps,
port->num_add_tx_qps);
@@ -2493,7 +2494,7 @@ static int ehea_up(struct net_device *dev)
}
}
- down(&ehea_bcmc_regs.lock);
+ mutex_lock(&ehea_bcmc_regs.lock);
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret) {
@@ -2516,10 +2517,10 @@ out:
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
ehea_update_bcmc_registrations();
- up(&ehea_bcmc_regs.lock);
+ mutex_unlock(&ehea_bcmc_regs.lock);
ehea_update_firmware_handles();
- up(&ehea_fw_handles.lock);
+ mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
@@ -2545,7 +2546,7 @@ static int ehea_open(struct net_device *dev)
int ret;
struct ehea_port *port = netdev_priv(dev);
- down(&port->port_lock);
+ mutex_lock(&port->port_lock);
if (netif_msg_ifup(port))
ehea_info("enabling port %s", dev->name);
@@ -2556,7 +2557,7 @@ static int ehea_open(struct net_device *dev)
netif_start_queue(dev);
}
- up(&port->port_lock);
+ mutex_unlock(&port->port_lock);
return ret;
}
@@ -2569,18 +2570,18 @@ static int ehea_down(struct net_device *dev)
if (port->state == EHEA_PORT_DOWN)
return 0;
- down(&ehea_bcmc_regs.lock);
+ mutex_lock(&ehea_fw_handles.lock);
+
+ mutex_lock(&ehea_bcmc_regs.lock);
ehea_drop_multicast_list(dev);
ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
ehea_free_interrupts(dev);
- down(&ehea_fw_handles.lock);
-
port->state = EHEA_PORT_DOWN;
ehea_update_bcmc_registrations();
- up(&ehea_bcmc_regs.lock);
+ mutex_unlock(&ehea_bcmc_regs.lock);
ret = ehea_clean_all_portres(port);
if (ret)
@@ -2588,7 +2589,7 @@ static int ehea_down(struct net_device *dev)
dev->name, ret);
ehea_update_firmware_handles();
- up(&ehea_fw_handles.lock);
+ mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
@@ -2602,11 +2603,11 @@ static int ehea_stop(struct net_device *dev)
ehea_info("disabling port %s", dev->name);
flush_scheduled_work();
- down(&port->port_lock);
+ mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
ret = ehea_down(dev);
- up(&port->port_lock);
+ mutex_unlock(&port->port_lock);
return ret;
}
@@ -2820,7 +2821,7 @@ static void ehea_reset_port(struct work_struct *work)
struct net_device *dev = port->netdev;
port->resets++;
- down(&port->port_lock);
+ mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
@@ -2840,7 +2841,7 @@ static void ehea_reset_port(struct work_struct *work)
netif_wake_queue(dev);
out:
- up(&port->port_lock);
+ mutex_unlock(&port->port_lock);
return;
}
@@ -2849,7 +2850,7 @@ static void ehea_rereg_mrs(struct work_struct *work)
int ret, i;
struct ehea_adapter *adapter;
- down(&dlpar_mem_lock);
+ mutex_lock(&dlpar_mem_lock);
ehea_info("LPAR memory enlarged - re-initializing driver");
list_for_each_entry(adapter, &adapter_list, list)
@@ -2857,22 +2858,24 @@ static void ehea_rereg_mrs(struct work_struct *work)
/* Shutdown all ports */
for (i = 0; i < EHEA_MAX_PORTS; i++) {
struct ehea_port *port = adapter->port[i];
+ struct net_device *dev;
- if (port) {
- struct net_device *dev = port->netdev;
+ if (!port)
+ continue;
- if (dev->flags & IFF_UP) {
- down(&port->port_lock);
- netif_stop_queue(dev);
- ehea_flush_sq(port);
- ret = ehea_stop_qps(dev);
- if (ret) {
- up(&port->port_lock);
- goto out;
- }
- port_napi_disable(port);
- up(&port->port_lock);
+ dev = port->netdev;
+
+ if (dev->flags & IFF_UP) {
+ mutex_lock(&port->port_lock);
+ netif_stop_queue(dev);
+ ehea_flush_sq(port);
+ ret = ehea_stop_qps(dev);
+ if (ret) {
+ mutex_unlock(&port->port_lock);
+ goto out;
}
+ port_napi_disable(port);
+ mutex_unlock(&port->port_lock);
}
}
@@ -2912,17 +2915,17 @@ static void ehea_rereg_mrs(struct work_struct *work)
struct net_device *dev = port->netdev;
if (dev->flags & IFF_UP) {
- down(&port->port_lock);
+ mutex_lock(&port->port_lock);
port_napi_enable(port);
ret = ehea_restart_qps(dev);
if (!ret)
netif_wake_queue(dev);
- up(&port->port_lock);
+ mutex_unlock(&port->port_lock);
}
}
}
}
- up(&dlpar_mem_lock);
+ mutex_unlock(&dlpar_mem_lock);
ehea_info("re-initializing driver complete");
out:
return;
@@ -3083,7 +3086,7 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
port = netdev_priv(dev);
- sema_init(&port->port_lock, 1);
+ mutex_init(&port->port_lock);
port->state = EHEA_PORT_DOWN;
port->sig_comp_iv = sq_entries / 10;
@@ -3362,7 +3365,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
ehea_error("Invalid ibmebus device probed");
return -EINVAL;
}
- down(&ehea_fw_handles.lock);
+ mutex_lock(&ehea_fw_handles.lock);
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
if (!adapter) {
@@ -3446,7 +3449,7 @@ out_free_ad:
out:
ehea_update_firmware_handles();
- up(&ehea_fw_handles.lock);
+ mutex_unlock(&ehea_fw_handles.lock);
return ret;
}
@@ -3465,7 +3468,7 @@ static int __devexit ehea_remove(struct of_device *dev)
flush_scheduled_work();
- down(&ehea_fw_handles.lock);
+ mutex_lock(&ehea_fw_handles.lock);
ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
tasklet_kill(&adapter->neq_tasklet);
@@ -3476,7 +3479,7 @@ static int __devexit ehea_remove(struct of_device *dev)
kfree(adapter);
ehea_update_firmware_handles();
- up(&ehea_fw_handles.lock);
+ mutex_unlock(&ehea_fw_handles.lock);
return 0;
}
@@ -3563,9 +3566,8 @@ int __init ehea_module_init(void)
memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles));
memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
- sema_init(&dlpar_mem_lock, 1);
- sema_init(&ehea_fw_handles.lock, 1);
- sema_init(&ehea_bcmc_regs.lock, 1);
+ mutex_init(&ehea_fw_handles.lock);
+ mutex_init(&ehea_bcmc_regs.lock);
ret = check_module_parm();
if (ret)
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index fe59c27c09e3897c92da655abbd22ce1b06b9193..e5e6352556fa5391b4c0223a0fc949343e563526 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -198,7 +198,7 @@ static int mpc52xx_fec_init_phy(struct net_device *dev)
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
- snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT,
+ snprintf(phy_id, BUS_ID_SIZE, "%x:%02x",
(unsigned int)dev->base_addr, priv->phy_addr);
priv->link = PHY_DOWN;
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 1d0cd1dd955e4d9bf60e012b89ec59bcb238bdc1..f5634447276de067d18d85c386d3dbcf9baab618 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -124,7 +124,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_i
goto out_free;
}
- bus->id = res.start;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
bus->priv = priv;
bus->dev = dev;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9f088a47d8b14d5015e1e984cd7dadd5716fc467..8c4214b0ee1f2ff7d6bc7f04bd497e07ef613f35 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -29,90 +29,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Changelog:
- * 0.01: 05 Oct 2003: First release that compiles without warnings.
- * 0.02: 05 Oct 2003: Fix bug for nv_drain_tx: do not try to free NULL skbs.
- * Check all PCI BARs for the register window.
- * udelay added to mii_rw.
- * 0.03: 06 Oct 2003: Initialize dev->irq.
- * 0.04: 07 Oct 2003: Initialize np->lock, reduce handled irqs, add printks.
- * 0.05: 09 Oct 2003: printk removed again, irq status print tx_timeout.
- * 0.06: 10 Oct 2003: MAC Address read updated, pff flag generation updated,
- * irq mask updated
- * 0.07: 14 Oct 2003: Further irq mask updates.
- * 0.08: 20 Oct 2003: rx_desc.Length initialization added, nv_alloc_rx refill
- * added into irq handler, NULL check for drain_ring.
- * 0.09: 20 Oct 2003: Basic link speed irq implementation. Only handle the
- * requested interrupt sources.
- * 0.10: 20 Oct 2003: First cleanup for release.
- * 0.11: 21 Oct 2003: hexdump for tx added, rx buffer sizes increased.
- * MAC Address init fix, set_multicast cleanup.
- * 0.12: 23 Oct 2003: Cleanups for release.
- * 0.13: 25 Oct 2003: Limit for concurrent tx packets increased to 10.
- * Set link speed correctly. start rx before starting
- * tx (nv_start_rx sets the link speed).
- * 0.14: 25 Oct 2003: Nic dependant irq mask.
- * 0.15: 08 Nov 2003: fix smp deadlock with set_multicast_list during
- * open.
- * 0.16: 15 Nov 2003: include file cleanup for ppc64, rx buffer size
- * increased to 1628 bytes.
- * 0.17: 16 Nov 2003: undo rx buffer size increase. Substract 1 from
- * the tx length.
- * 0.18: 17 Nov 2003: fix oops due to late initialization of dev_stats
- * 0.19: 29 Nov 2003: Handle RxNoBuf, detect & handle invalid mac
- * addresses, really stop rx if already running
- * in nv_start_rx, clean up a bit.
- * 0.20: 07 Dec 2003: alloc fixes
- * 0.21: 12 Jan 2004: additional alloc fix, nic polling fix.
- * 0.22: 19 Jan 2004: reprogram timer to a sane rate, avoid lockup
- * on close.
- * 0.23: 26 Jan 2004: various small cleanups
- * 0.24: 27 Feb 2004: make driver even less anonymous in backtraces
- * 0.25: 09 Mar 2004: wol support
- * 0.26: 03 Jun 2004: netdriver specific annotation, sparse-related fixes
- * 0.27: 19 Jun 2004: Gigabit support, new descriptor rings,
- * added CK804/MCP04 device IDs, code fixes
- * for registers, link status and other minor fixes.
- * 0.28: 21 Jun 2004: Big cleanup, making driver mostly endian safe
- * 0.29: 31 Aug 2004: Add backup timer for link change notification.
- * 0.30: 25 Sep 2004: rx checksum support for nf 250 Gb. Add rx reset
- * into nv_close, otherwise reenabling for wol can
- * cause DMA to kfree'd memory.
- * 0.31: 14 Nov 2004: ethtool support for getting/setting link
- * capabilities.
- * 0.32: 16 Apr 2005: RX_ERROR4 handling added.
- * 0.33: 16 May 2005: Support for MCP51 added.
- * 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics.
- * 0.35: 26 Jun 2005: Support for MCP55 added.
- * 0.36: 28 Jun 2005: Add jumbo frame support.
- * 0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list
- * 0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of
- * per-packet flags.
- * 0.39: 18 Jul 2005: Add 64bit descriptor support.
- * 0.40: 19 Jul 2005: Add support for mac address change.
- * 0.41: 30 Jul 2005: Write back original MAC in nv_close instead
- * of nv_remove
- * 0.42: 06 Aug 2005: Fix lack of link speed initialization
- * in the second (and later) nv_open call
- * 0.43: 10 Aug 2005: Add support for tx checksum.
- * 0.44: 20 Aug 2005: Add support for scatter gather and segmentation.
- * 0.45: 18 Sep 2005: Remove nv_stop/start_rx from every link check
- * 0.46: 20 Oct 2005: Add irq optimization modes.
- * 0.47: 26 Oct 2005: Add phyaddr 0 in phy scan.
- * 0.48: 24 Dec 2005: Disable TSO, bugfix for pci_map_single
- * 0.49: 10 Dec 2005: Fix tso for large buffers.
- * 0.50: 20 Jan 2006: Add 8021pq tagging support.
- * 0.51: 20 Jan 2006: Add 64bit consistent memory allocation for rings.
- * 0.52: 20 Jan 2006: Add MSI/MSIX support.
- * 0.53: 19 Mar 2006: Fix init from low power mode and add hw reset.
- * 0.54: 21 Mar 2006: Fix spin locks for multi irqs and cleanup.
- * 0.55: 22 Mar 2006: Add flow control (pause frame).
- * 0.56: 22 Mar 2006: Additional ethtool config and moduleparam support.
- * 0.57: 14 May 2006: Mac address set in probe/remove and order corrections.
- * 0.58: 30 Oct 2006: Added support for sideband management unit.
- * 0.59: 30 Oct 2006: Added support for recoverable error.
- * 0.60: 20 Jan 2007: Code optimizations for rings, rx & tx data paths, and stats.
- *
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
* This means recovery from netif_stop_queue only happens if the hw timer
@@ -123,11 +39,6 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#ifdef CONFIG_FORCEDETH_NAPI
-#define DRIVERNAPI "-NAPI"
-#else
-#define DRIVERNAPI
-#endif
#define FORCEDETH_VERSION "0.61"
#define DRV_NAME "forcedeth"
@@ -930,6 +841,13 @@ static inline u32 nv_descr_getlength_ex(struct ring_desc_ex *prd, u32 v)
return le32_to_cpu(prd->flaglen) & LEN_MASK_V2;
}
+static bool nv_optimized(struct fe_priv *np)
+{
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ return false;
+ return true;
+}
+
static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
int delay, int delaymax, const char *msg)
{
@@ -966,7 +884,7 @@ static void setup_hw_rings(struct net_device *dev, int rxtx_flags)
struct fe_priv *np = get_nvpriv(dev);
u8 __iomem *base = get_hwbase(dev);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
if (rxtx_flags & NV_SETUP_RX_RING) {
writel(dma_low(np->ring_addr), base + NvRegRxRingPhysAddr);
}
@@ -989,7 +907,7 @@ static void free_rings(struct net_device *dev)
{
struct fe_priv *np = get_nvpriv(dev);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
if (np->rx_ring.orig)
pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (np->rx_ring_size + np->tx_ring_size),
np->rx_ring.orig, np->ring_addr);
@@ -1435,6 +1353,18 @@ static void nv_stop_tx(struct net_device *dev)
base + NvRegTransmitPoll);
}
+static void nv_start_rxtx(struct net_device *dev)
+{
+ nv_start_rx(dev);
+ nv_start_tx(dev);
+}
+
+static void nv_stop_rxtx(struct net_device *dev)
+{
+ nv_stop_rx(dev);
+ nv_stop_tx(dev);
+}
+
static void nv_txrx_reset(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
@@ -1657,7 +1587,7 @@ static void nv_do_rx_refill(unsigned long data)
} else {
disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
}
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ if (!nv_optimized(np))
retcode = nv_alloc_rx(dev);
else
retcode = nv_alloc_rx_optimized(dev);
@@ -1682,8 +1612,10 @@ static void nv_init_rx(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
int i;
+
np->get_rx = np->put_rx = np->first_rx = np->rx_ring;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+
+ if (!nv_optimized(np))
np->last_rx.orig = &np->rx_ring.orig[np->rx_ring_size-1];
else
np->last_rx.ex = &np->rx_ring.ex[np->rx_ring_size-1];
@@ -1691,7 +1623,7 @@ static void nv_init_rx(struct net_device *dev)
np->last_rx_ctx = &np->rx_skb[np->rx_ring_size-1];
for (i = 0; i < np->rx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
np->rx_ring.orig[i].flaglen = 0;
np->rx_ring.orig[i].buf = 0;
} else {
@@ -1709,8 +1641,10 @@ static void nv_init_tx(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
int i;
+
np->get_tx = np->put_tx = np->first_tx = np->tx_ring;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+
+ if (!nv_optimized(np))
np->last_tx.orig = &np->tx_ring.orig[np->tx_ring_size-1];
else
np->last_tx.ex = &np->tx_ring.ex[np->tx_ring_size-1];
@@ -1721,7 +1655,7 @@ static void nv_init_tx(struct net_device *dev)
np->tx_end_flip = NULL;
for (i = 0; i < np->tx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
np->tx_ring.orig[i].flaglen = 0;
np->tx_ring.orig[i].buf = 0;
} else {
@@ -1744,7 +1678,8 @@ static int nv_init_ring(struct net_device *dev)
nv_init_tx(dev);
nv_init_rx(dev);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+
+ if (!nv_optimized(np))
return nv_alloc_rx(dev);
else
return nv_alloc_rx_optimized(dev);
@@ -1775,7 +1710,7 @@ static void nv_drain_tx(struct net_device *dev)
unsigned int i;
for (i = 0; i < np->tx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
np->tx_ring.orig[i].flaglen = 0;
np->tx_ring.orig[i].buf = 0;
} else {
@@ -1802,7 +1737,7 @@ static void nv_drain_rx(struct net_device *dev)
int i;
for (i = 0; i < np->rx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
np->rx_ring.orig[i].flaglen = 0;
np->rx_ring.orig[i].buf = 0;
} else {
@@ -1823,7 +1758,7 @@ static void nv_drain_rx(struct net_device *dev)
}
}
-static void drain_ring(struct net_device *dev)
+static void nv_drain_rxtx(struct net_device *dev)
{
nv_drain_tx(dev);
nv_drain_rx(dev);
@@ -2260,7 +2195,7 @@ static void nv_tx_timeout(struct net_device *dev)
}
printk(KERN_INFO "%s: Dumping tx ring\n", dev->name);
for (i=0;itx_ring_size;i+= 4) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
i,
le32_to_cpu(np->tx_ring.orig[i].buf),
@@ -2296,7 +2231,7 @@ static void nv_tx_timeout(struct net_device *dev)
nv_stop_tx(dev);
/* 2) check that the packets were not sent already: */
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ if (!nv_optimized(np))
nv_tx_done(dev);
else
nv_tx_done_optimized(dev, np->tx_ring_size);
@@ -2663,12 +2598,10 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
netif_tx_lock_bh(dev);
spin_lock(&np->lock);
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
nv_txrx_reset(dev);
/* drain rx queue */
- nv_drain_rx(dev);
- nv_drain_tx(dev);
+ nv_drain_rxtx(dev);
/* reinit driver view of the rx queue */
set_bufsize(dev);
if (nv_init_ring(dev)) {
@@ -2685,8 +2618,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
pci_push(base);
/* restart rx engine */
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
spin_unlock(&np->lock);
netif_tx_unlock_bh(dev);
nv_enable_irq(dev);
@@ -3393,7 +3325,7 @@ static int nv_napi_poll(struct napi_struct *napi, int budget)
unsigned long flags;
int pkts, retcode;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
pkts = nv_rx_process(dev, budget);
retcode = nv_alloc_rx(dev);
} else {
@@ -3634,7 +3566,7 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
if (intr_test) {
handler = nv_nic_irq_test;
} else {
- if (np->desc_ver == DESC_VER_3)
+ if (nv_optimized(np))
handler = nv_nic_irq_optimized;
else
handler = nv_nic_irq;
@@ -3787,12 +3719,10 @@ static void nv_do_nic_poll(unsigned long data)
netif_tx_lock_bh(dev);
spin_lock(&np->lock);
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
nv_txrx_reset(dev);
/* drain rx queue */
- nv_drain_rx(dev);
- nv_drain_tx(dev);
+ nv_drain_rxtx(dev);
/* reinit driver view of the rx queue */
set_bufsize(dev);
if (nv_init_ring(dev)) {
@@ -3809,8 +3739,7 @@ static void nv_do_nic_poll(unsigned long data)
pci_push(base);
/* restart rx engine */
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
spin_unlock(&np->lock);
netif_tx_unlock_bh(dev);
}
@@ -3821,7 +3750,7 @@ static void nv_do_nic_poll(unsigned long data)
pci_push(base);
if (!using_multi_irqs(dev)) {
- if (np->desc_ver == DESC_VER_3)
+ if (nv_optimized(np))
nv_nic_irq_optimized(0, dev);
else
nv_nic_irq(0, dev);
@@ -3860,7 +3789,8 @@ static void nv_do_stats_poll(unsigned long data)
nv_get_hw_stats(dev);
if (!np->in_shutdown)
- mod_timer(&np->stats_poll, jiffies + STATS_INTERVAL);
+ mod_timer(&np->stats_poll,
+ round_jiffies(jiffies + STATS_INTERVAL));
}
static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
@@ -4018,8 +3948,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
netif_tx_lock_bh(dev);
spin_lock(&np->lock);
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
spin_unlock(&np->lock);
netif_tx_unlock_bh(dev);
}
@@ -4125,8 +4054,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
}
if (netif_running(dev)) {
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
nv_enable_irq(dev);
}
@@ -4169,8 +4097,7 @@ static int nv_nway_reset(struct net_device *dev)
netif_tx_lock_bh(dev);
spin_lock(&np->lock);
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
spin_unlock(&np->lock);
netif_tx_unlock_bh(dev);
printk(KERN_INFO "%s: link down.\n", dev->name);
@@ -4190,8 +4117,7 @@ static int nv_nway_reset(struct net_device *dev)
}
if (netif_running(dev)) {
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
nv_enable_irq(dev);
}
ret = 0;
@@ -4248,7 +4174,7 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
}
/* allocate new rings */
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
rxtx_ring = pci_alloc_consistent(np->pci_dev,
sizeof(struct ring_desc) * (ring->rx_pending + ring->tx_pending),
&ring_addr);
@@ -4261,7 +4187,7 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
tx_skbuff = kmalloc(sizeof(struct nv_skb_map) * ring->tx_pending, GFP_KERNEL);
if (!rxtx_ring || !rx_skbuff || !tx_skbuff) {
/* fall back to old rings */
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
if (rxtx_ring)
pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (ring->rx_pending + ring->tx_pending),
rxtx_ring, ring_addr);
@@ -4282,12 +4208,10 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
netif_tx_lock_bh(dev);
spin_lock(&np->lock);
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
nv_txrx_reset(dev);
/* drain queues */
- nv_drain_rx(dev);
- nv_drain_tx(dev);
+ nv_drain_rxtx(dev);
/* delete queues */
free_rings(dev);
}
@@ -4295,7 +4219,8 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
/* set new values */
np->rx_ring_size = ring->rx_pending;
np->tx_ring_size = ring->tx_pending;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+
+ if (!nv_optimized(np)) {
np->rx_ring.orig = (struct ring_desc*)rxtx_ring;
np->tx_ring.orig = &np->rx_ring.orig[np->rx_ring_size];
} else {
@@ -4327,8 +4252,7 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
pci_push(base);
/* restart engines */
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
spin_unlock(&np->lock);
netif_tx_unlock_bh(dev);
nv_enable_irq(dev);
@@ -4369,8 +4293,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
netif_tx_lock_bh(dev);
spin_lock(&np->lock);
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
spin_unlock(&np->lock);
netif_tx_unlock_bh(dev);
}
@@ -4411,8 +4334,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
}
if (netif_running(dev)) {
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
nv_enable_irq(dev);
}
return 0;
@@ -4648,8 +4570,7 @@ static int nv_loopback_test(struct net_device *dev)
pci_push(base);
/* restart rx engine */
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
/* setup packet for tx */
pkt_len = ETH_DATA_LEN;
@@ -4667,7 +4588,7 @@ static int nv_loopback_test(struct net_device *dev)
for (i = 0; i < pkt_len; i++)
pkt_data[i] = (u8)(i & 0xff);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
np->tx_ring.orig[0].buf = cpu_to_le32(test_dma_addr);
np->tx_ring.orig[0].flaglen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra);
} else {
@@ -4681,7 +4602,7 @@ static int nv_loopback_test(struct net_device *dev)
msleep(500);
/* check for rx of the packet */
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
flags = le32_to_cpu(np->rx_ring.orig[0].flaglen);
len = nv_descr_getlength(&np->rx_ring.orig[0], np->desc_ver);
@@ -4727,12 +4648,10 @@ static int nv_loopback_test(struct net_device *dev)
dev_kfree_skb_any(tx_skb);
out:
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
nv_txrx_reset(dev);
/* drain rx queue */
- nv_drain_rx(dev);
- nv_drain_tx(dev);
+ nv_drain_rxtx(dev);
if (netif_running(dev)) {
writel(misc1_flags, base + NvRegMisc1);
@@ -4770,12 +4689,10 @@ static void nv_self_test(struct net_device *dev, struct ethtool_test *test, u64
writel(NVREG_IRQSTAT_MASK, base + NvRegMSIXIrqStatus);
}
/* stop engines */
- nv_stop_rx(dev);
- nv_stop_tx(dev);
+ nv_stop_rxtx(dev);
nv_txrx_reset(dev);
/* drain rx queue */
- nv_drain_rx(dev);
- nv_drain_tx(dev);
+ nv_drain_rxtx(dev);
spin_unlock_irq(&np->lock);
netif_tx_unlock_bh(dev);
}
@@ -4816,8 +4733,7 @@ static void nv_self_test(struct net_device *dev, struct ethtool_test *test, u64
writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
pci_push(base);
/* restart rx engine */
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
netif_start_queue(dev);
#ifdef CONFIG_FORCEDETH_NAPI
napi_enable(&np->napi);
@@ -5046,8 +4962,7 @@ static int nv_open(struct net_device *dev)
* to init hw */
np->linkspeed = 0;
ret = nv_update_linkspeed(dev);
- nv_start_rx(dev);
- nv_start_tx(dev);
+ nv_start_rxtx(dev);
netif_start_queue(dev);
#ifdef CONFIG_FORCEDETH_NAPI
napi_enable(&np->napi);
@@ -5064,13 +4979,14 @@ static int nv_open(struct net_device *dev)
/* start statistics timer */
if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2))
- mod_timer(&np->stats_poll, jiffies + STATS_INTERVAL);
+ mod_timer(&np->stats_poll,
+ round_jiffies(jiffies + STATS_INTERVAL));
spin_unlock_irq(&np->lock);
return 0;
out_drain:
- drain_ring(dev);
+ nv_drain_rxtx(dev);
return ret;
}
@@ -5093,8 +5009,7 @@ static int nv_close(struct net_device *dev)
netif_stop_queue(dev);
spin_lock_irq(&np->lock);
- nv_stop_tx(dev);
- nv_stop_rx(dev);
+ nv_stop_rxtx(dev);
nv_txrx_reset(dev);
/* disable interrupts on the nic or we will lock up */
@@ -5107,7 +5022,7 @@ static int nv_close(struct net_device *dev)
nv_free_irq(dev);
- drain_ring(dev);
+ nv_drain_rxtx(dev);
if (np->wolenabled) {
writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
@@ -5267,7 +5182,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
np->rx_ring_size = RX_RING_DEFAULT;
np->tx_ring_size = TX_RING_DEFAULT;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+ if (!nv_optimized(np)) {
np->rx_ring.orig = pci_alloc_consistent(pci_dev,
sizeof(struct ring_desc) * (np->rx_ring_size + np->tx_ring_size),
&np->ring_addr);
@@ -5289,7 +5204,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
dev->open = nv_open;
dev->stop = nv_close;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+
+ if (!nv_optimized(np))
dev->hard_start_xmit = nv_start_xmit;
else
dev->hard_start_xmit = nv_start_xmit_optimized;
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 940e2041ba3832de9dbb4b57351cac6775bc5cac..67b4b0728fce3b983e0f19556c3c3ecc856eddd7 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1178,7 +1178,7 @@ static int __devinit find_phy(struct device_node *np,
data = of_get_property(np, "fixed-link", NULL);
if (data) {
- snprintf(fpi->bus_id, 16, PHY_ID_FMT, 0, *data);
+ snprintf(fpi->bus_id, 16, "%x:%02x", 0, *data);
return 0;
}
@@ -1202,7 +1202,7 @@ static int __devinit find_phy(struct device_node *np,
if (!data || len != 4)
goto out_put_mdio;
- snprintf(fpi->bus_id, 16, PHY_ID_FMT, res.start, *data);
+ snprintf(fpi->bus_id, 16, "%x:%02x", res.start, *data);
out_put_mdio:
of_node_put(mdionode);
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index b8e4a736a130e6c79d537252f4fc2da3e7c2dddf..1620030cd33c92e7fd7044ea54c7f1d3c6442925 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -130,7 +130,7 @@ static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
* we get is an int, and the odds of multiple bitbang mdio buses
* is low enough that it's not worth going too crazy.
*/
- bus->id = res.start;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
data = of_get_property(np, "fsl,mdio-pin", &len);
if (!data || len != 4)
@@ -307,7 +307,7 @@ static int __devinit fs_enet_mdio_probe(struct device *dev)
return -ENOMEM;
new_bus->name = "BB MII Bus",
- new_bus->id = pdev->id;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
new_bus->phy_mask = ~0x9;
pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data;
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index a89cf15090b8840ed3d79f986ab2c30e1b6bbedf..ba75efc9f5b50bdaf647a70015a2d08b3987ec9d 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -196,7 +196,7 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
if (ret)
return ret;
- new_bus->id = res.start;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
fec->fecp = ioremap(res.start, res.end - res.start + 1);
if (!fec->fecp)
@@ -309,7 +309,7 @@ static int __devinit fs_enet_fec_mdio_probe(struct device *dev)
new_bus->read = &fs_enet_fec_mii_read,
new_bus->write = &fs_enet_fec_mii_write,
new_bus->reset = &fs_enet_fec_mii_reset,
- new_bus->id = pdev->id;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
pdata = (struct fs_mii_fec_platform_info *)pdev->dev.platform_data;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 718cf77e345ad0b4e288a2750c5f96f21f14f75e..c8c3df737d73582ebe15484c898ff0f2a9ac5666 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1185,7 +1185,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
int frame_size = new_mtu + ETH_HLEN;
if (priv->vlan_enable)
- frame_size += VLAN_ETH_HLEN;
+ frame_size += VLAN_HLEN;
if (gfar_uses_fcb(priv))
frame_size += GMAC_FCB_LEN;
@@ -1250,17 +1250,12 @@ static void gfar_timeout(struct net_device *dev)
}
/* Interrupt Handler for Transmit complete */
-static irqreturn_t gfar_transmit(int irq, void *dev_id)
+int gfar_clean_tx_ring(struct net_device *dev)
{
- struct net_device *dev = (struct net_device *) dev_id;
- struct gfar_private *priv = netdev_priv(dev);
struct txbd8 *bdp;
+ struct gfar_private *priv = netdev_priv(dev);
+ int howmany = 0;
- /* Clear IEVENT */
- gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
-
- /* Lock priv */
- spin_lock(&priv->txlock);
bdp = priv->dirty_tx;
while ((bdp->status & TXBD_READY) == 0) {
/* If dirty_tx and cur_tx are the same, then either the */
@@ -1269,7 +1264,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id)
if ((bdp == priv->cur_tx) && (netif_queue_stopped(dev) == 0))
break;
- dev->stats.tx_packets++;
+ howmany++;
/* Deferred means some collisions occurred during transmit, */
/* but we eventually sent the packet. */
@@ -1278,11 +1273,15 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id)
/* Free the sk buffer associated with this TxBD */
dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
+
priv->tx_skbuff[priv->skb_dirtytx] = NULL;
priv->skb_dirtytx =
(priv->skb_dirtytx +
1) & TX_RING_MOD_MASK(priv->tx_ring_size);
+ /* Clean BD length for empty detection */
+ bdp->length = 0;
+
/* update bdp to point at next bd in the ring (wrapping if necessary) */
if (bdp->status & TXBD_WRAP)
bdp = priv->tx_bd_base;
@@ -1297,13 +1296,32 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id)
netif_wake_queue(dev);
} /* while ((bdp->status & TXBD_READY) == 0) */
+ dev->stats.tx_packets += howmany;
+
+ return howmany;
+}
+
+/* Interrupt Handler for Transmit complete */
+static irqreturn_t gfar_transmit(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct gfar_private *priv = netdev_priv(dev);
+
+ /* Clear IEVENT */
+ gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
+
+ /* Lock priv */
+ spin_lock(&priv->txlock);
+
+ gfar_clean_tx_ring(dev);
+
/* If we are coalescing the interrupts, reset the timer */
/* Otherwise, clear it */
- if (priv->txcoalescing)
+ if (likely(priv->txcoalescing)) {
+ gfar_write(&priv->regs->txic, 0);
gfar_write(&priv->regs->txic,
mk_ic_value(priv->txcount, priv->txtime));
- else
- gfar_write(&priv->regs->txic, 0);
+ }
spin_unlock(&priv->txlock);
@@ -1392,15 +1410,15 @@ irqreturn_t gfar_receive(int irq, void *dev_id)
unsigned long flags;
#endif
- /* Clear IEVENT, so rx interrupt isn't called again
- * because of this interrupt */
- gfar_write(&priv->regs->ievent, IEVENT_RX_MASK);
-
/* support NAPI */
#ifdef CONFIG_GFAR_NAPI
+ /* Clear IEVENT, so interrupts aren't called again
+ * because of the packets that have already arrived */
+ gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
+
if (netif_rx_schedule_prep(dev, &priv->napi)) {
tempval = gfar_read(&priv->regs->imask);
- tempval &= IMASK_RX_DISABLED;
+ tempval &= IMASK_RTX_DISABLED;
gfar_write(&priv->regs->imask, tempval);
__netif_rx_schedule(dev, &priv->napi);
@@ -1411,17 +1429,20 @@ irqreturn_t gfar_receive(int irq, void *dev_id)
gfar_read(&priv->regs->imask));
}
#else
+ /* Clear IEVENT, so rx interrupt isn't called again
+ * because of this interrupt */
+ gfar_write(&priv->regs->ievent, IEVENT_RX_MASK);
spin_lock_irqsave(&priv->rxlock, flags);
gfar_clean_rx_ring(dev, priv->rx_ring_size);
/* If we are coalescing interrupts, update the timer */
/* Otherwise, clear it */
- if (priv->rxcoalescing)
+ if (likely(priv->rxcoalescing)) {
+ gfar_write(&priv->regs->rxic, 0);
gfar_write(&priv->regs->rxic,
mk_ic_value(priv->rxcount, priv->rxtime));
- else
- gfar_write(&priv->regs->rxic, 0);
+ }
spin_unlock_irqrestore(&priv->rxlock, flags);
#endif
@@ -1526,9 +1547,7 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
rmb();
skb = priv->rx_skbuff[priv->skb_currx];
- if (!(bdp->status &
- (RXBD_LARGE | RXBD_SHORT | RXBD_NONOCTET
- | RXBD_CRCERR | RXBD_OVERRUN | RXBD_TRUNCATED))) {
+ if ((bdp->status & RXBD_LAST) && !(bdp->status & RXBD_ERR)) {
/* Increment the number of packets */
dev->stats.rx_packets++;
howmany++;
@@ -1582,6 +1601,13 @@ static int gfar_poll(struct napi_struct *napi, int budget)
struct gfar_private *priv = container_of(napi, struct gfar_private, napi);
struct net_device *dev = priv->dev;
int howmany;
+ unsigned long flags;
+
+ /* If we fail to get the lock, don't bother with the TX BDs */
+ if (spin_trylock_irqsave(&priv->txlock, flags)) {
+ gfar_clean_tx_ring(dev);
+ spin_unlock_irqrestore(&priv->txlock, flags);
+ }
howmany = gfar_clean_rx_ring(dev, budget);
@@ -1595,11 +1621,11 @@ static int gfar_poll(struct napi_struct *napi, int budget)
/* If we are coalescing interrupts, update the timer */
/* Otherwise, clear it */
- if (priv->rxcoalescing)
+ if (likely(priv->rxcoalescing)) {
+ gfar_write(&priv->regs->rxic, 0);
gfar_write(&priv->regs->rxic,
mk_ic_value(priv->rxcount, priv->rxtime));
- else
- gfar_write(&priv->regs->rxic, 0);
+ }
}
return howmany;
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 46cd7735e6fe39f1671b80a0df321217ffb603f7..0d0883609469ed02549af321f5ea4febbb229b3f 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -102,7 +102,7 @@ extern const char gfar_driver_version[];
#define DEFAULT_FIFO_TX_STARVE 0x40
#define DEFAULT_FIFO_TX_STARVE_OFF 0x80
#define DEFAULT_BD_STASH 1
-#define DEFAULT_STASH_LENGTH 64
+#define DEFAULT_STASH_LENGTH 96
#define DEFAULT_STASH_INDEX 0
/* The number of Exact Match registers */
@@ -124,11 +124,18 @@ extern const char gfar_driver_version[];
#define DEFAULT_TX_COALESCE 1
#define DEFAULT_TXCOUNT 16
-#define DEFAULT_TXTIME 4
+#define DEFAULT_TXTIME 21
+#define DEFAULT_RXTIME 21
+
+/* Non NAPI Case */
+#ifndef CONFIG_GFAR_NAPI
#define DEFAULT_RX_COALESCE 1
#define DEFAULT_RXCOUNT 16
-#define DEFAULT_RXTIME 4
+#else
+#define DEFAULT_RX_COALESCE 0
+#define DEFAULT_RXCOUNT 0
+#endif /* CONFIG_GFAR_NAPI */
#define TBIPA_VALUE 0x1f
#define MIIMCFG_INIT_VALUE 0x00000007
@@ -242,6 +249,7 @@ extern const char gfar_driver_version[];
#define IEVENT_PERR 0x00000001
#define IEVENT_RX_MASK (IEVENT_RXB0 | IEVENT_RXF0)
#define IEVENT_TX_MASK (IEVENT_TXB | IEVENT_TXF)
+#define IEVENT_RTX_MASK (IEVENT_RX_MASK | IEVENT_TX_MASK)
#define IEVENT_ERR_MASK \
(IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
@@ -269,11 +277,12 @@ extern const char gfar_driver_version[];
#define IMASK_FIQ 0x00000004
#define IMASK_DPE 0x00000002
#define IMASK_PERR 0x00000001
-#define IMASK_RX_DISABLED ~(IMASK_RXFEN0 | IMASK_BSY)
#define IMASK_DEFAULT (IMASK_TXEEN | IMASK_TXFEN | IMASK_TXBEN | \
IMASK_RXFEN0 | IMASK_BSY | IMASK_EBERR | IMASK_BABR | \
IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \
| IMASK_PERR)
+#define IMASK_RTX_DISABLED ((~(IMASK_RXFEN0 | IMASK_TXFEN | IMASK_BSY)) \
+ & IMASK_DEFAULT)
/* Fifo management */
#define FIFO_TX_THR_MASK 0x01ff
@@ -340,6 +349,9 @@ extern const char gfar_driver_version[];
#define RXBD_OVERRUN 0x0002
#define RXBD_TRUNCATED 0x0001
#define RXBD_STATS 0x01ff
+#define RXBD_ERR (RXBD_LARGE | RXBD_SHORT | RXBD_NONOCTET \
+ | RXBD_CRCERR | RXBD_OVERRUN \
+ | RXBD_TRUNCATED)
/* Rx FCB status field bits */
#define RXFCB_VLN 0x8000
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 24327629bf039d989652f472133b807b6b22a1ba..b8898927236a69fa5723c1d1c0bc10faec7db2b3 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -173,7 +173,7 @@ int gfar_mdio_probe(struct device *dev)
new_bus->read = &gfar_mdio_read,
new_bus->write = &gfar_mdio_write,
new_bus->reset = &gfar_mdio_reset,
- new_bus->id = pdev->id;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 5ddf8b0c34f9286fe7fe61060088d4327fe30481..5f4b4c6c9f761075db2967d1e1f1343e2454602e 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -172,7 +172,7 @@ static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_ty
struct ethhdr *eth;
struct bpqdev *bpq;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
goto drop;
if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
@@ -553,7 +553,7 @@ static int bpq_device_event(struct notifier_block *this,unsigned long event, voi
{
struct net_device *dev = (struct net_device *)ptr;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
return NOTIFY_DONE;
if (!dev_is_ethdev(dev))
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 57772bebff56336cb50c3bde81c0823d13210787..bb31e09899fc6a6fc06487b7409f19562a336bfa 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1259,26 +1259,7 @@ static void ibmveth_proc_unregister_driver(void)
remove_proc_entry(IBMVETH_PROC_DIR, init_net.proc_net);
}
-static void *ibmveth_seq_start(struct seq_file *seq, loff_t *pos)
-{
- if (*pos == 0) {
- return (void *)1;
- } else {
- return NULL;
- }
-}
-
-static void *ibmveth_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- ++*pos;
- return NULL;
-}
-
-static void ibmveth_seq_stop(struct seq_file *seq, void *v)
-{
-}
-
-static int ibmveth_seq_show(struct seq_file *seq, void *v)
+static int ibmveth_show(struct seq_file *seq, void *v)
{
struct ibmveth_adapter *adapter = seq->private;
char *current_mac = ((char*) &adapter->netdev->dev_addr);
@@ -1302,27 +1283,10 @@ static int ibmveth_seq_show(struct seq_file *seq, void *v)
return 0;
}
-static struct seq_operations ibmveth_seq_ops = {
- .start = ibmveth_seq_start,
- .next = ibmveth_seq_next,
- .stop = ibmveth_seq_stop,
- .show = ibmveth_seq_show,
-};
static int ibmveth_proc_open(struct inode *inode, struct file *file)
{
- struct seq_file *seq;
- struct proc_dir_entry *proc;
- int rc;
-
- rc = seq_open(file, &ibmveth_seq_ops);
- if (!rc) {
- /* recover the pointer buried in proc_dir_entry data */
- seq = file->private_data;
- proc = PDE(inode);
- seq->private = proc->data;
- }
- return rc;
+ return single_open(file, ibmveth_show, PDE(inode)->data);
}
static const struct file_operations ibmveth_proc_fops = {
@@ -1330,7 +1294,7 @@ static const struct file_operations ibmveth_proc_fops = {
.open = ibmveth_proc_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = single_release,
};
static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter)
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 3d2e7217e9af04a9afd5beac494d67b0761255a8..16f9c756aa46d75c1044c6a2edc43f20945c802e 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -117,8 +117,8 @@ struct ixgb_buffer {
struct sk_buff *skb;
dma_addr_t dma;
unsigned long time_stamp;
- uint16_t length;
- uint16_t next_to_watch;
+ u16 length;
+ u16 next_to_watch;
};
struct ixgb_desc_ring {
@@ -152,13 +152,12 @@ struct ixgb_desc_ring {
struct ixgb_adapter {
struct timer_list watchdog_timer;
struct vlan_group *vlgrp;
- uint32_t bd_number;
- uint32_t rx_buffer_len;
- uint32_t part_num;
- uint16_t link_speed;
- uint16_t link_duplex;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 part_num;
+ u16 link_speed;
+ u16 link_duplex;
spinlock_t tx_lock;
- atomic_t irq_sem;
struct work_struct tx_timeout_task;
struct timer_list blink_timer;
@@ -168,20 +167,20 @@ struct ixgb_adapter {
struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
unsigned int restart_queue;
unsigned long timeo_start;
- uint32_t tx_cmd_type;
- uint64_t hw_csum_tx_good;
- uint64_t hw_csum_tx_error;
- uint32_t tx_int_delay;
- uint32_t tx_timeout_count;
- boolean_t tx_int_delay_enable;
- boolean_t detect_tx_hung;
+ u32 tx_cmd_type;
+ u64 hw_csum_tx_good;
+ u64 hw_csum_tx_error;
+ u32 tx_int_delay;
+ u32 tx_timeout_count;
+ bool tx_int_delay_enable;
+ bool detect_tx_hung;
/* RX */
struct ixgb_desc_ring rx_ring;
- uint64_t hw_csum_rx_error;
- uint64_t hw_csum_rx_good;
- uint32_t rx_int_delay;
- boolean_t rx_csum;
+ u64 hw_csum_rx_error;
+ u64 hw_csum_rx_good;
+ u32 rx_int_delay;
+ bool rx_csum;
/* OS defined structs */
struct napi_struct napi;
@@ -193,8 +192,17 @@ struct ixgb_adapter {
struct ixgb_hw hw;
u16 msg_enable;
struct ixgb_hw_stats stats;
- uint32_t alloc_rx_buff_failed;
- boolean_t have_msi;
+ u32 alloc_rx_buff_failed;
+ bool have_msi;
+ unsigned long flags;
+};
+
+enum ixgb_state_t {
+ /* TBD
+ __IXGB_TESTING,
+ __IXGB_RESETTING,
+ */
+ __IXGB_DOWN
};
/* Exported from other modules */
@@ -203,4 +211,14 @@ extern void ixgb_set_ethtool_ops(struct net_device *netdev);
extern char ixgb_driver_name[];
extern const char ixgb_driver_version[];
+extern int ixgb_up(struct ixgb_adapter *adapter);
+extern void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog);
+extern void ixgb_reset(struct ixgb_adapter *adapter);
+extern int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
+extern int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
+extern void ixgb_free_rx_resources(struct ixgb_adapter *adapter);
+extern void ixgb_free_tx_resources(struct ixgb_adapter *adapter);
+extern void ixgb_update_stats(struct ixgb_adapter *adapter);
+
+
#endif /* _IXGB_H_ */
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index e8eb0fd6c5766fdc1429ffb050a11408f243c5d6..2f7ed52c7502795b3fb8bc5bd018c3eb9f007d3d 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -29,14 +29,14 @@
#include "ixgb_hw.h"
#include "ixgb_ee.h"
/* Local prototypes */
-static uint16_t ixgb_shift_in_bits(struct ixgb_hw *hw);
+static u16 ixgb_shift_in_bits(struct ixgb_hw *hw);
static void ixgb_shift_out_bits(struct ixgb_hw *hw,
- uint16_t data,
- uint16_t count);
+ u16 data,
+ u16 count);
static void ixgb_standby_eeprom(struct ixgb_hw *hw);
-static boolean_t ixgb_wait_eeprom_command(struct ixgb_hw *hw);
+static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw);
static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
@@ -48,7 +48,7 @@ static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
*****************************************************************************/
static void
ixgb_raise_clock(struct ixgb_hw *hw,
- uint32_t *eecd_reg)
+ u32 *eecd_reg)
{
/* Raise the clock input to the EEPROM (by setting the SK bit), and then
* wait 50 microseconds.
@@ -67,7 +67,7 @@ ixgb_raise_clock(struct ixgb_hw *hw,
*****************************************************************************/
static void
ixgb_lower_clock(struct ixgb_hw *hw,
- uint32_t *eecd_reg)
+ u32 *eecd_reg)
{
/* Lower the clock input to the EEPROM (by clearing the SK bit), and then
* wait 50 microseconds.
@@ -87,11 +87,11 @@ ixgb_lower_clock(struct ixgb_hw *hw,
*****************************************************************************/
static void
ixgb_shift_out_bits(struct ixgb_hw *hw,
- uint16_t data,
- uint16_t count)
+ u16 data,
+ u16 count)
{
- uint32_t eecd_reg;
- uint32_t mask;
+ u32 eecd_reg;
+ u32 mask;
/* We need to shift "count" bits out to the EEPROM. So, value in the
* "data" parameter will be shifted out to the EEPROM one bit at a time.
@@ -133,12 +133,12 @@ ixgb_shift_out_bits(struct ixgb_hw *hw,
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static uint16_t
+static u16
ixgb_shift_in_bits(struct ixgb_hw *hw)
{
- uint32_t eecd_reg;
- uint32_t i;
- uint16_t data;
+ u32 eecd_reg;
+ u32 i;
+ u16 data;
/* In order to read a register from the EEPROM, we need to shift 16 bits
* in from the EEPROM. Bits are "shifted in" by raising the clock input to
@@ -179,7 +179,7 @@ ixgb_shift_in_bits(struct ixgb_hw *hw)
static void
ixgb_setup_eeprom(struct ixgb_hw *hw)
{
- uint32_t eecd_reg;
+ u32 eecd_reg;
eecd_reg = IXGB_READ_REG(hw, EECD);
@@ -201,7 +201,7 @@ ixgb_setup_eeprom(struct ixgb_hw *hw)
static void
ixgb_standby_eeprom(struct ixgb_hw *hw)
{
- uint32_t eecd_reg;
+ u32 eecd_reg;
eecd_reg = IXGB_READ_REG(hw, EECD);
@@ -235,7 +235,7 @@ ixgb_standby_eeprom(struct ixgb_hw *hw)
static void
ixgb_clock_eeprom(struct ixgb_hw *hw)
{
- uint32_t eecd_reg;
+ u32 eecd_reg;
eecd_reg = IXGB_READ_REG(hw, EECD);
@@ -259,7 +259,7 @@ ixgb_clock_eeprom(struct ixgb_hw *hw)
static void
ixgb_cleanup_eeprom(struct ixgb_hw *hw)
{
- uint32_t eecd_reg;
+ u32 eecd_reg;
eecd_reg = IXGB_READ_REG(hw, EECD);
@@ -279,14 +279,14 @@ ixgb_cleanup_eeprom(struct ixgb_hw *hw)
* The command is done when the EEPROM's data out pin goes high.
*
* Returns:
- * TRUE: EEPROM data pin is high before timeout.
- * FALSE: Time expired.
+ * true: EEPROM data pin is high before timeout.
+ * false: Time expired.
*****************************************************************************/
-static boolean_t
+static bool
ixgb_wait_eeprom_command(struct ixgb_hw *hw)
{
- uint32_t eecd_reg;
- uint32_t i;
+ u32 eecd_reg;
+ u32 i;
/* Toggle the CS line. This in effect tells to EEPROM to actually execute
* the command in question.
@@ -301,12 +301,12 @@ ixgb_wait_eeprom_command(struct ixgb_hw *hw)
eecd_reg = IXGB_READ_REG(hw, EECD);
if(eecd_reg & IXGB_EECD_DO)
- return (TRUE);
+ return (true);
udelay(50);
}
ASSERT(0);
- return (FALSE);
+ return (false);
}
/******************************************************************************
@@ -319,22 +319,22 @@ ixgb_wait_eeprom_command(struct ixgb_hw *hw)
* valid.
*
* Returns:
- * TRUE: Checksum is valid
- * FALSE: Checksum is not valid.
+ * true: Checksum is valid
+ * false: Checksum is not valid.
*****************************************************************************/
-boolean_t
+bool
ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
{
- uint16_t checksum = 0;
- uint16_t i;
+ u16 checksum = 0;
+ u16 i;
for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
checksum += ixgb_read_eeprom(hw, i);
- if(checksum == (uint16_t) EEPROM_SUM)
- return (TRUE);
+ if(checksum == (u16) EEPROM_SUM)
+ return (true);
else
- return (FALSE);
+ return (false);
}
/******************************************************************************
@@ -348,13 +348,13 @@ ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
void
ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
{
- uint16_t checksum = 0;
- uint16_t i;
+ u16 checksum = 0;
+ u16 i;
for(i = 0; i < EEPROM_CHECKSUM_REG; i++)
checksum += ixgb_read_eeprom(hw, i);
- checksum = (uint16_t) EEPROM_SUM - checksum;
+ checksum = (u16) EEPROM_SUM - checksum;
ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
return;
@@ -372,7 +372,7 @@ ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
*
*****************************************************************************/
void
-ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t offset, uint16_t data)
+ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
@@ -425,11 +425,11 @@ ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t offset, uint16_t data)
* Returns:
* The 16-bit value read from the eeprom
*****************************************************************************/
-uint16_t
+u16
ixgb_read_eeprom(struct ixgb_hw *hw,
- uint16_t offset)
+ u16 offset)
{
- uint16_t data;
+ u16 data;
/* Prepare the EEPROM for reading */
ixgb_setup_eeprom(hw);
@@ -457,14 +457,14 @@ ixgb_read_eeprom(struct ixgb_hw *hw,
* hw - Struct containing variables accessed by shared code
*
* Returns:
- * TRUE: if eeprom read is successful
- * FALSE: otherwise.
+ * true: if eeprom read is successful
+ * false: otherwise.
*****************************************************************************/
-boolean_t
+bool
ixgb_get_eeprom_data(struct ixgb_hw *hw)
{
- uint16_t i;
- uint16_t checksum = 0;
+ u16 i;
+ u16 checksum = 0;
struct ixgb_ee_map_type *ee_map;
DEBUGFUNC("ixgb_get_eeprom_data");
@@ -473,27 +473,27 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw)
DEBUGOUT("ixgb_ee: Reading eeprom data\n");
for(i = 0; i < IXGB_EEPROM_SIZE ; i++) {
- uint16_t ee_data;
+ u16 ee_data;
ee_data = ixgb_read_eeprom(hw, i);
checksum += ee_data;
hw->eeprom[i] = cpu_to_le16(ee_data);
}
- if (checksum != (uint16_t) EEPROM_SUM) {
+ if (checksum != (u16) EEPROM_SUM) {
DEBUGOUT("ixgb_ee: Checksum invalid.\n");
/* clear the init_ctrl_reg_1 to signify that the cache is
* invalidated */
ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
- return (FALSE);
+ return (false);
}
if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
!= cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
DEBUGOUT("ixgb_ee: Signature invalid.\n");
- return(FALSE);
+ return(false);
}
- return(TRUE);
+ return(true);
}
/******************************************************************************
@@ -503,17 +503,17 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw)
* hw - Struct containing variables accessed by shared code
*
* Returns:
- * TRUE: eeprom signature was good and the eeprom read was successful
- * FALSE: otherwise.
+ * true: eeprom signature was good and the eeprom read was successful
+ * false: otherwise.
******************************************************************************/
-static boolean_t
+static bool
ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
== cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
- return (TRUE);
+ return (true);
} else {
return ixgb_get_eeprom_data(hw);
}
@@ -529,11 +529,11 @@ ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
* Word at indexed offset in eeprom, if valid, 0 otherwise.
******************************************************************************/
__le16
-ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index)
+ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index)
{
if ((index < IXGB_EEPROM_SIZE) &&
- (ixgb_check_and_get_eeprom_data(hw) == TRUE)) {
+ (ixgb_check_and_get_eeprom_data(hw) == true)) {
return(hw->eeprom[index]);
}
@@ -550,14 +550,14 @@ ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index)
******************************************************************************/
void
ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
- uint8_t *mac_addr)
+ u8 *mac_addr)
{
int i;
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
DEBUGFUNC("ixgb_get_ee_mac_addr");
- if (ixgb_check_and_get_eeprom_data(hw) == TRUE) {
+ if (ixgb_check_and_get_eeprom_data(hw) == true) {
for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) {
mac_addr[i] = ee_map->mac_addr[i];
DEBUGOUT2("mac(%d) = %.2X\n", i, mac_addr[i]);
@@ -574,10 +574,10 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
* Returns:
* PBA number if EEPROM contents are valid, 0 otherwise
******************************************************************************/
-uint32_t
+u32
ixgb_get_ee_pba_number(struct ixgb_hw *hw)
{
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ if (ixgb_check_and_get_eeprom_data(hw) == true)
return (le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
| (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16));
@@ -593,12 +593,12 @@ ixgb_get_ee_pba_number(struct ixgb_hw *hw)
* Returns:
* Device Id if EEPROM contents are valid, 0 otherwise
******************************************************************************/
-uint16_t
+u16
ixgb_get_ee_device_id(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
- if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
+ if (ixgb_check_and_get_eeprom_data(hw) == true)
return (le16_to_cpu(ee_map->device_id));
return (0);
diff --git a/drivers/net/ixgb/ixgb_ee.h b/drivers/net/ixgb/ixgb_ee.h
index 7908bf3005ed53e121f56e696f01ec3a6917e7b8..4b7bd0d4a8a930992581a7bd4ef439bb90c7486f 100644
--- a/drivers/net/ixgb/ixgb_ee.h
+++ b/drivers/net/ixgb/ixgb_ee.h
@@ -75,7 +75,7 @@
/* EEPROM structure */
struct ixgb_ee_map_type {
- uint8_t mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS];
+ u8 mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS];
__le16 compatibility;
__le16 reserved1[4];
__le32 pba_number;
@@ -88,19 +88,19 @@ struct ixgb_ee_map_type {
__le16 oem_reserved[16];
__le16 swdpins_reg;
__le16 circuit_ctrl_reg;
- uint8_t d3_power;
- uint8_t d0_power;
+ u8 d3_power;
+ u8 d0_power;
__le16 reserved2[28];
__le16 checksum;
};
/* EEPROM Functions */
-uint16_t ixgb_read_eeprom(struct ixgb_hw *hw, uint16_t reg);
+u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg);
-boolean_t ixgb_validate_eeprom_checksum(struct ixgb_hw *hw);
+bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw);
void ixgb_update_eeprom_checksum(struct ixgb_hw *hw);
-void ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t reg, uint16_t data);
+void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data);
#endif /* IXGB_EE_H */
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 75f3a68ee354ef23fc33b0848fe5c3bb36e5a64b..8464d8a013b038d4b8c29b27365d4b98b661b737 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -32,15 +32,6 @@
#include
-extern int ixgb_up(struct ixgb_adapter *adapter);
-extern void ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog);
-extern void ixgb_reset(struct ixgb_adapter *adapter);
-extern int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
-extern int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
-extern void ixgb_free_rx_resources(struct ixgb_adapter *adapter);
-extern void ixgb_free_tx_resources(struct ixgb_adapter *adapter);
-extern void ixgb_update_stats(struct ixgb_adapter *adapter);
-
#define IXGB_ALL_RAR_ENTRIES 16
struct ixgb_stats {
@@ -136,7 +127,7 @@ ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
return -EINVAL;
if(netif_running(adapter->netdev)) {
- ixgb_down(adapter, TRUE);
+ ixgb_down(adapter, true);
ixgb_reset(adapter);
ixgb_up(adapter);
ixgb_set_speed_duplex(netdev);
@@ -185,7 +176,7 @@ ixgb_set_pauseparam(struct net_device *netdev,
hw->fc.type = ixgb_fc_none;
if(netif_running(adapter->netdev)) {
- ixgb_down(adapter, TRUE);
+ ixgb_down(adapter, true);
ixgb_up(adapter);
ixgb_set_speed_duplex(netdev);
} else
@@ -194,7 +185,7 @@ ixgb_set_pauseparam(struct net_device *netdev,
return 0;
}
-static uint32_t
+static u32
ixgb_get_rx_csum(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
@@ -203,14 +194,14 @@ ixgb_get_rx_csum(struct net_device *netdev)
}
static int
-ixgb_set_rx_csum(struct net_device *netdev, uint32_t data)
+ixgb_set_rx_csum(struct net_device *netdev, u32 data)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
adapter->rx_csum = data;
if(netif_running(netdev)) {
- ixgb_down(adapter,TRUE);
+ ixgb_down(adapter, true);
ixgb_up(adapter);
ixgb_set_speed_duplex(netdev);
} else
@@ -218,14 +209,14 @@ ixgb_set_rx_csum(struct net_device *netdev, uint32_t data)
return 0;
}
-static uint32_t
+static u32
ixgb_get_tx_csum(struct net_device *netdev)
{
return (netdev->features & NETIF_F_HW_CSUM) != 0;
}
static int
-ixgb_set_tx_csum(struct net_device *netdev, uint32_t data)
+ixgb_set_tx_csum(struct net_device *netdev, u32 data)
{
if (data)
netdev->features |= NETIF_F_HW_CSUM;
@@ -236,7 +227,7 @@ ixgb_set_tx_csum(struct net_device *netdev, uint32_t data)
}
static int
-ixgb_set_tso(struct net_device *netdev, uint32_t data)
+ixgb_set_tso(struct net_device *netdev, u32 data)
{
if(data)
netdev->features |= NETIF_F_TSO;
@@ -245,7 +236,7 @@ ixgb_set_tso(struct net_device *netdev, uint32_t data)
return 0;
}
-static uint32_t
+static u32
ixgb_get_msglevel(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
@@ -253,7 +244,7 @@ ixgb_get_msglevel(struct net_device *netdev)
}
static void
-ixgb_set_msglevel(struct net_device *netdev, uint32_t data)
+ixgb_set_msglevel(struct net_device *netdev, u32 data)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
adapter->msg_enable = data;
@@ -263,7 +254,7 @@ ixgb_set_msglevel(struct net_device *netdev, uint32_t data)
static int
ixgb_get_regs_len(struct net_device *netdev)
{
-#define IXGB_REG_DUMP_LEN 136*sizeof(uint32_t)
+#define IXGB_REG_DUMP_LEN 136*sizeof(u32)
return IXGB_REG_DUMP_LEN;
}
@@ -273,9 +264,9 @@ ixgb_get_regs(struct net_device *netdev,
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
- uint32_t *reg = p;
- uint32_t *reg_start = reg;
- uint8_t i;
+ u32 *reg = p;
+ u32 *reg_start = reg;
+ u8 i;
/* the 1 (one) below indicates an attempt at versioning, if the
* interface in ethtool or the driver changes, this 1 should be
@@ -404,7 +395,7 @@ ixgb_get_regs(struct net_device *netdev,
*reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */
*reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */
- regs->len = (reg - reg_start) * sizeof(uint32_t);
+ regs->len = (reg - reg_start) * sizeof(u32);
}
static int
@@ -416,7 +407,7 @@ ixgb_get_eeprom_len(struct net_device *netdev)
static int
ixgb_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, uint8_t *bytes)
+ struct ethtool_eeprom *eeprom, u8 *bytes)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
@@ -454,7 +445,7 @@ ixgb_get_eeprom(struct net_device *netdev,
eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i));
}
- memcpy(bytes, (uint8_t *)eeprom_buff + (eeprom->offset & 1),
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
eeprom->len);
kfree(eeprom_buff);
@@ -464,14 +455,14 @@ geeprom_error:
static int
ixgb_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, uint8_t *bytes)
+ struct ethtool_eeprom *eeprom, u8 *bytes)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
- uint16_t *eeprom_buff;
+ u16 *eeprom_buff;
void *ptr;
int max_len, first_word, last_word;
- uint16_t i;
+ u16 i;
if(eeprom->len == 0)
return -EINVAL;
@@ -570,14 +561,14 @@ ixgb_set_ringparam(struct net_device *netdev,
return -EINVAL;
if(netif_running(adapter->netdev))
- ixgb_down(adapter,TRUE);
+ ixgb_down(adapter, true);
- rxdr->count = max(ring->rx_pending,(uint32_t)MIN_RXD);
- rxdr->count = min(rxdr->count,(uint32_t)MAX_RXD);
+ rxdr->count = max(ring->rx_pending,(u32)MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)MAX_RXD);
rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
- txdr->count = max(ring->tx_pending,(uint32_t)MIN_TXD);
- txdr->count = min(txdr->count,(uint32_t)MAX_TXD);
+ txdr->count = max(ring->tx_pending,(u32)MIN_TXD);
+ txdr->count = min(txdr->count,(u32)MAX_TXD);
txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
if(netif_running(adapter->netdev)) {
@@ -633,7 +624,7 @@ ixgb_led_blink_callback(unsigned long data)
}
static int
-ixgb_phys_id(struct net_device *netdev, uint32_t data)
+ixgb_phys_id(struct net_device *netdev, u32 data)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
@@ -669,7 +660,7 @@ ixgb_get_sset_count(struct net_device *netdev, int sset)
static void
ixgb_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
+ struct ethtool_stats *stats, u64 *data)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
int i;
@@ -678,12 +669,12 @@ ixgb_get_ethtool_stats(struct net_device *netdev,
for(i = 0; i < IXGB_STATS_LEN; i++) {
char *p = (char *)adapter+ixgb_gstrings_stats[i].stat_offset;
data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
- sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
}
static void
-ixgb_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
+ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
{
int i;
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index 80a8b98882255177a24b719909b2de1603a73477..04d2003e24e12a789ac9805d17c61ae716729ef1 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -35,13 +35,13 @@
/* Local function prototypes */
-static uint32_t ixgb_hash_mc_addr(struct ixgb_hw *hw, uint8_t * mc_addr);
+static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr);
-static void ixgb_mta_set(struct ixgb_hw *hw, uint32_t hash_value);
+static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value);
static void ixgb_get_bus_info(struct ixgb_hw *hw);
-static boolean_t ixgb_link_reset(struct ixgb_hw *hw);
+static bool ixgb_link_reset(struct ixgb_hw *hw);
static void ixgb_optics_reset(struct ixgb_hw *hw);
@@ -55,18 +55,18 @@ static void ixgb_clear_vfta(struct ixgb_hw *hw);
static void ixgb_init_rx_addrs(struct ixgb_hw *hw);
-static uint16_t ixgb_read_phy_reg(struct ixgb_hw *hw,
- uint32_t reg_address,
- uint32_t phy_address,
- uint32_t device_type);
+static u16 ixgb_read_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type);
-static boolean_t ixgb_setup_fc(struct ixgb_hw *hw);
+static bool ixgb_setup_fc(struct ixgb_hw *hw);
-static boolean_t mac_addr_valid(uint8_t *mac_addr);
+static bool mac_addr_valid(u8 *mac_addr);
-static uint32_t ixgb_mac_reset(struct ixgb_hw *hw)
+static u32 ixgb_mac_reset(struct ixgb_hw *hw)
{
- uint32_t ctrl_reg;
+ u32 ctrl_reg;
ctrl_reg = IXGB_CTRL0_RST |
IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */
@@ -114,11 +114,11 @@ static uint32_t ixgb_mac_reset(struct ixgb_hw *hw)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-boolean_t
+bool
ixgb_adapter_stop(struct ixgb_hw *hw)
{
- uint32_t ctrl_reg;
- uint32_t icr_reg;
+ u32 ctrl_reg;
+ u32 icr_reg;
DEBUGFUNC("ixgb_adapter_stop");
@@ -127,13 +127,13 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
*/
if(hw->adapter_stopped) {
DEBUGOUT("Exiting because the adapter is already stopped!!!\n");
- return FALSE;
+ return false;
}
/* Set the Adapter Stopped flag so other driver functions stop
* touching the Hardware.
*/
- hw->adapter_stopped = TRUE;
+ hw->adapter_stopped = true;
/* Clear interrupt mask to stop board from generating interrupts */
DEBUGOUT("Masking off all interrupts\n");
@@ -179,8 +179,8 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
static ixgb_xpak_vendor
ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
{
- uint32_t i;
- uint16_t vendor_name[5];
+ u32 i;
+ u16 vendor_name[5];
ixgb_xpak_vendor xpak_vendor;
DEBUGFUNC("ixgb_identify_xpak_vendor");
@@ -286,15 +286,15 @@ ixgb_identify_phy(struct ixgb_hw *hw)
* Leaves the transmit and receive units disabled and uninitialized.
*
* Returns:
- * TRUE if successful,
- * FALSE if unrecoverable problems were encountered.
+ * true if successful,
+ * false if unrecoverable problems were encountered.
*****************************************************************************/
-boolean_t
+bool
ixgb_init_hw(struct ixgb_hw *hw)
{
- uint32_t i;
- uint32_t ctrl_reg;
- boolean_t status;
+ u32 i;
+ u32 ctrl_reg;
+ bool status;
DEBUGFUNC("ixgb_init_hw");
@@ -318,9 +318,8 @@ ixgb_init_hw(struct ixgb_hw *hw)
/* Delay a few ms just to allow the reset to complete */
msleep(IXGB_DELAY_AFTER_EE_RESET);
- if (ixgb_get_eeprom_data(hw) == FALSE) {
- return(FALSE);
- }
+ if (!ixgb_get_eeprom_data(hw))
+ return false;
/* Use the device id to determine the type of phy/transceiver. */
hw->device_id = ixgb_get_ee_device_id(hw);
@@ -337,11 +336,11 @@ ixgb_init_hw(struct ixgb_hw *hw)
*/
if (!mac_addr_valid(hw->curr_mac_addr)) {
DEBUGOUT("MAC address invalid after ixgb_init_rx_addrs\n");
- return(FALSE);
+ return(false);
}
/* tell the routines in this file they can access hardware again */
- hw->adapter_stopped = FALSE;
+ hw->adapter_stopped = false;
/* Fill in the bus_info structure */
ixgb_get_bus_info(hw);
@@ -378,7 +377,7 @@ ixgb_init_hw(struct ixgb_hw *hw)
static void
ixgb_init_rx_addrs(struct ixgb_hw *hw)
{
- uint32_t i;
+ u32 i;
DEBUGFUNC("ixgb_init_rx_addrs");
@@ -438,13 +437,13 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw)
*****************************************************************************/
void
ixgb_mc_addr_list_update(struct ixgb_hw *hw,
- uint8_t *mc_addr_list,
- uint32_t mc_addr_count,
- uint32_t pad)
+ u8 *mc_addr_list,
+ u32 mc_addr_count,
+ u32 pad)
{
- uint32_t hash_value;
- uint32_t i;
- uint32_t rar_used_count = 1; /* RAR[0] is used for our MAC address */
+ u32 hash_value;
+ u32 i;
+ u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */
DEBUGFUNC("ixgb_mc_addr_list_update");
@@ -516,11 +515,11 @@ ixgb_mc_addr_list_update(struct ixgb_hw *hw,
* Returns:
* The hash value
*****************************************************************************/
-static uint32_t
+static u32
ixgb_hash_mc_addr(struct ixgb_hw *hw,
- uint8_t *mc_addr)
+ u8 *mc_addr)
{
- uint32_t hash_value = 0;
+ u32 hash_value = 0;
DEBUGFUNC("ixgb_hash_mc_addr");
@@ -534,18 +533,18 @@ ixgb_hash_mc_addr(struct ixgb_hw *hw,
case 0:
/* [47:36] i.e. 0x563 for above example address */
hash_value =
- ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+ ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
break;
case 1: /* [46:35] i.e. 0xAC6 for above example address */
hash_value =
- ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+ ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
break;
case 2: /* [45:34] i.e. 0x5D8 for above example address */
hash_value =
- ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+ ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
break;
case 3: /* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
break;
default:
/* Invalid mc_filter_type, what should we do? */
@@ -566,10 +565,10 @@ ixgb_hash_mc_addr(struct ixgb_hw *hw,
*****************************************************************************/
static void
ixgb_mta_set(struct ixgb_hw *hw,
- uint32_t hash_value)
+ u32 hash_value)
{
- uint32_t hash_bit, hash_reg;
- uint32_t mta_reg;
+ u32 hash_bit, hash_reg;
+ u32 mta_reg;
/* The MTA is a register array of 128 32-bit registers.
* It is treated like an array of 4096 bits. We want to set
@@ -600,23 +599,23 @@ ixgb_mta_set(struct ixgb_hw *hw,
*****************************************************************************/
void
ixgb_rar_set(struct ixgb_hw *hw,
- uint8_t *addr,
- uint32_t index)
+ u8 *addr,
+ u32 index)
{
- uint32_t rar_low, rar_high;
+ u32 rar_low, rar_high;
DEBUGFUNC("ixgb_rar_set");
/* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
*/
- rar_low = ((uint32_t) addr[0] |
- ((uint32_t)addr[1] << 8) |
- ((uint32_t)addr[2] << 16) |
- ((uint32_t)addr[3] << 24));
+ rar_low = ((u32) addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
- rar_high = ((uint32_t) addr[4] |
- ((uint32_t)addr[5] << 8) |
+ rar_high = ((u32) addr[4] |
+ ((u32)addr[5] << 8) |
IXGB_RAH_AV);
IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
@@ -633,8 +632,8 @@ ixgb_rar_set(struct ixgb_hw *hw,
*****************************************************************************/
void
ixgb_write_vfta(struct ixgb_hw *hw,
- uint32_t offset,
- uint32_t value)
+ u32 offset,
+ u32 value)
{
IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value);
return;
@@ -648,7 +647,7 @@ ixgb_write_vfta(struct ixgb_hw *hw,
static void
ixgb_clear_vfta(struct ixgb_hw *hw)
{
- uint32_t offset;
+ u32 offset;
for(offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
@@ -661,12 +660,12 @@ ixgb_clear_vfta(struct ixgb_hw *hw)
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static boolean_t
+static bool
ixgb_setup_fc(struct ixgb_hw *hw)
{
- uint32_t ctrl_reg;
- uint32_t pap_reg = 0; /* by default, assume no pause time */
- boolean_t status = TRUE;
+ u32 ctrl_reg;
+ u32 pap_reg = 0; /* by default, assume no pause time */
+ bool status = true;
DEBUGFUNC("ixgb_setup_fc");
@@ -763,15 +762,15 @@ ixgb_setup_fc(struct ixgb_hw *hw)
* This requires that first an address cycle command is sent, followed by a
* read command.
*****************************************************************************/
-static uint16_t
+static u16
ixgb_read_phy_reg(struct ixgb_hw *hw,
- uint32_t reg_address,
- uint32_t phy_address,
- uint32_t device_type)
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type)
{
- uint32_t i;
- uint32_t data;
- uint32_t command = 0;
+ u32 i;
+ u32 data;
+ u32 command = 0;
ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
@@ -836,7 +835,7 @@ ixgb_read_phy_reg(struct ixgb_hw *hw,
*/
data = IXGB_READ_REG(hw, MSRWD);
data >>= IXGB_MSRWD_READ_DATA_SHIFT;
- return((uint16_t) data);
+ return((u16) data);
}
/******************************************************************************
@@ -858,20 +857,20 @@ ixgb_read_phy_reg(struct ixgb_hw *hw,
*****************************************************************************/
static void
ixgb_write_phy_reg(struct ixgb_hw *hw,
- uint32_t reg_address,
- uint32_t phy_address,
- uint32_t device_type,
- uint16_t data)
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type,
+ u16 data)
{
- uint32_t i;
- uint32_t command = 0;
+ u32 i;
+ u32 command = 0;
ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
/* Put the data in the MDIO Read/Write Data register */
- IXGB_WRITE_REG(hw, MSRWD, (uint32_t)data);
+ IXGB_WRITE_REG(hw, MSRWD, (u32)data);
/* Setup and write the address cycle command */
command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
@@ -940,8 +939,8 @@ ixgb_write_phy_reg(struct ixgb_hw *hw,
void
ixgb_check_for_link(struct ixgb_hw *hw)
{
- uint32_t status_reg;
- uint32_t xpcss_reg;
+ u32 status_reg;
+ u32 xpcss_reg;
DEBUGFUNC("ixgb_check_for_link");
@@ -950,7 +949,7 @@ ixgb_check_for_link(struct ixgb_hw *hw)
if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
(status_reg & IXGB_STATUS_LU)) {
- hw->link_up = TRUE;
+ hw->link_up = true;
} else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
(status_reg & IXGB_STATUS_LU)) {
DEBUGOUT("XPCSS Not Aligned while Status:LU is set.\n");
@@ -974,10 +973,10 @@ ixgb_check_for_link(struct ixgb_hw *hw)
*
* Called by any function that needs to check the link status of the adapter.
*****************************************************************************/
-boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw)
+bool ixgb_check_for_bad_link(struct ixgb_hw *hw)
{
- uint32_t newLFC, newRFC;
- boolean_t bad_link_returncode = FALSE;
+ u32 newLFC, newRFC;
+ bool bad_link_returncode = false;
if (hw->phy_type == ixgb_phy_type_txn17401) {
newLFC = IXGB_READ_REG(hw, LFC);
@@ -986,7 +985,7 @@ boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw)
|| (hw->lastRFC + 250 < newRFC)) {
DEBUGOUT
("BAD LINK! too many LFC/RFC since last check\n");
- bad_link_returncode = TRUE;
+ bad_link_returncode = true;
}
hw->lastLFC = newLFC;
hw->lastRFC = newRFC;
@@ -1003,7 +1002,7 @@ boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw)
static void
ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
{
- volatile uint32_t temp_reg;
+ volatile u32 temp_reg;
DEBUGFUNC("ixgb_clear_hw_cntrs");
@@ -1084,7 +1083,7 @@ ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
void
ixgb_led_on(struct ixgb_hw *hw)
{
- uint32_t ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
+ u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
/* To turn on the LED, clear software-definable pin 0 (SDP0). */
ctrl0_reg &= ~IXGB_CTRL0_SDP0;
@@ -1100,7 +1099,7 @@ ixgb_led_on(struct ixgb_hw *hw)
void
ixgb_led_off(struct ixgb_hw *hw)
{
- uint32_t ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
+ u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
/* To turn off the LED, set software-definable pin 0 (SDP0). */
ctrl0_reg |= IXGB_CTRL0_SDP0;
@@ -1116,7 +1115,7 @@ ixgb_led_off(struct ixgb_hw *hw)
static void
ixgb_get_bus_info(struct ixgb_hw *hw)
{
- uint32_t status_reg;
+ u32 status_reg;
status_reg = IXGB_READ_REG(hw, STATUS);
@@ -1155,21 +1154,21 @@ ixgb_get_bus_info(struct ixgb_hw *hw)
* mac_addr - pointer to MAC address.
*
*****************************************************************************/
-static boolean_t
-mac_addr_valid(uint8_t *mac_addr)
+static bool
+mac_addr_valid(u8 *mac_addr)
{
- boolean_t is_valid = TRUE;
+ bool is_valid = true;
DEBUGFUNC("mac_addr_valid");
/* Make sure it is not a multicast address */
if (IS_MULTICAST(mac_addr)) {
DEBUGOUT("MAC address is multicast\n");
- is_valid = FALSE;
+ is_valid = false;
}
/* Not a broadcast address */
else if (IS_BROADCAST(mac_addr)) {
DEBUGOUT("MAC address is broadcast\n");
- is_valid = FALSE;
+ is_valid = false;
}
/* Reject the zero address */
else if (mac_addr[0] == 0 &&
@@ -1179,7 +1178,7 @@ mac_addr_valid(uint8_t *mac_addr)
mac_addr[4] == 0 &&
mac_addr[5] == 0) {
DEBUGOUT("MAC address is all zeros\n");
- is_valid = FALSE;
+ is_valid = false;
}
return (is_valid);
}
@@ -1190,12 +1189,12 @@ mac_addr_valid(uint8_t *mac_addr)
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-static boolean_t
+static bool
ixgb_link_reset(struct ixgb_hw *hw)
{
- boolean_t link_status = FALSE;
- uint8_t wait_retries = MAX_RESET_ITERATIONS;
- uint8_t lrst_retries = MAX_RESET_ITERATIONS;
+ bool link_status = false;
+ u8 wait_retries = MAX_RESET_ITERATIONS;
+ u8 lrst_retries = MAX_RESET_ITERATIONS;
do {
/* Reset the link */
@@ -1208,7 +1207,7 @@ ixgb_link_reset(struct ixgb_hw *hw)
link_status =
((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU)
&& (IXGB_READ_REG(hw, XPCSS) &
- IXGB_XPCSS_ALIGN_STATUS)) ? TRUE : FALSE;
+ IXGB_XPCSS_ALIGN_STATUS)) ? true : false;
} while (!link_status && --wait_retries);
} while (!link_status && --lrst_retries);
@@ -1225,7 +1224,7 @@ static void
ixgb_optics_reset(struct ixgb_hw *hw)
{
if (hw->phy_type == ixgb_phy_type_txn17401) {
- uint16_t mdio_reg;
+ u16 mdio_reg;
ixgb_write_phy_reg(hw,
MDIO_PMA_PMD_CR1,
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h
index 4f176ff2b786dd06e1cd951e9c2b99b8e6c04476..39cfa47bea6937ee144337dd167d6eb2345545c0 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -538,8 +538,8 @@ struct ixgb_rx_desc {
__le64 buff_addr;
__le16 length;
__le16 reserved;
- uint8_t status;
- uint8_t errors;
+ u8 status;
+ u8 errors;
__le16 special;
};
@@ -570,8 +570,8 @@ struct ixgb_rx_desc {
struct ixgb_tx_desc {
__le64 buff_addr;
__le32 cmd_type_len;
- uint8_t status;
- uint8_t popts;
+ u8 status;
+ u8 popts;
__le16 vlan;
};
@@ -595,15 +595,15 @@ struct ixgb_tx_desc {
#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */
struct ixgb_context_desc {
- uint8_t ipcss;
- uint8_t ipcso;
+ u8 ipcss;
+ u8 ipcso;
__le16 ipcse;
- uint8_t tucss;
- uint8_t tucso;
+ u8 tucss;
+ u8 tucso;
__le16 tucse;
__le32 cmd_type_len;
- uint8_t status;
- uint8_t hdr_len;
+ u8 status;
+ u8 hdr_len;
__le16 mss;
};
@@ -637,33 +637,33 @@ struct ixgb_context_desc {
/* This structure takes a 64k flash and maps it for identification commands */
struct ixgb_flash_buffer {
- uint8_t manufacturer_id;
- uint8_t device_id;
- uint8_t filler1[0x2AA8];
- uint8_t cmd2;
- uint8_t filler2[0x2AAA];
- uint8_t cmd1;
- uint8_t filler3[0xAAAA];
+ u8 manufacturer_id;
+ u8 device_id;
+ u8 filler1[0x2AA8];
+ u8 cmd2;
+ u8 filler2[0x2AAA];
+ u8 cmd1;
+ u8 filler3[0xAAAA];
};
/*
* This is a little-endian specific check.
*/
#define IS_MULTICAST(Address) \
- (boolean_t)(((uint8_t *)(Address))[0] & ((uint8_t)0x01))
+ (bool)(((u8 *)(Address))[0] & ((u8)0x01))
/*
* Check whether an address is broadcast.
*/
#define IS_BROADCAST(Address) \
- ((((uint8_t *)(Address))[0] == ((uint8_t)0xff)) && (((uint8_t *)(Address))[1] == ((uint8_t)0xff)))
+ ((((u8 *)(Address))[0] == ((u8)0xff)) && (((u8 *)(Address))[1] == ((u8)0xff)))
/* Flow control parameters */
struct ixgb_fc {
- uint32_t high_water; /* Flow Control High-water */
- uint32_t low_water; /* Flow Control Low-water */
- uint16_t pause_time; /* Flow Control Pause timer */
- boolean_t send_xon; /* Flow control send XON */
+ u32 high_water; /* Flow Control High-water */
+ u32 low_water; /* Flow Control Low-water */
+ u16 pause_time; /* Flow Control Pause timer */
+ bool send_xon; /* Flow control send XON */
ixgb_fc_type type; /* Type of flow control */
};
@@ -685,139 +685,139 @@ struct ixgb_bus {
};
struct ixgb_hw {
- uint8_t __iomem *hw_addr;/* Base Address of the hardware */
+ u8 __iomem *hw_addr;/* Base Address of the hardware */
void *back; /* Pointer to OS-dependent struct */
struct ixgb_fc fc; /* Flow control parameters */
struct ixgb_bus bus; /* Bus parameters */
- uint32_t phy_id; /* Phy Identifier */
- uint32_t phy_addr; /* XGMII address of Phy */
+ u32 phy_id; /* Phy Identifier */
+ u32 phy_addr; /* XGMII address of Phy */
ixgb_mac_type mac_type; /* Identifier for MAC controller */
ixgb_phy_type phy_type; /* Transceiver/phy identifier */
- uint32_t max_frame_size; /* Maximum frame size supported */
- uint32_t mc_filter_type; /* Multicast filter hash type */
- uint32_t num_mc_addrs; /* Number of current Multicast addrs */
- uint8_t curr_mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS]; /* Individual address currently programmed in MAC */
- uint32_t num_tx_desc; /* Number of Transmit descriptors */
- uint32_t num_rx_desc; /* Number of Receive descriptors */
- uint32_t rx_buffer_size; /* Size of Receive buffer */
- boolean_t link_up; /* TRUE if link is valid */
- boolean_t adapter_stopped; /* State of adapter */
- uint16_t device_id; /* device id from PCI configuration space */
- uint16_t vendor_id; /* vendor id from PCI configuration space */
- uint8_t revision_id; /* revision id from PCI configuration space */
- uint16_t subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */
- uint16_t subsystem_id; /* subsystem id from PCI configuration space */
- uint32_t bar0; /* Base Address registers */
- uint32_t bar1;
- uint32_t bar2;
- uint32_t bar3;
- uint16_t pci_cmd_word; /* PCI command register id from PCI configuration space */
+ u32 max_frame_size; /* Maximum frame size supported */
+ u32 mc_filter_type; /* Multicast filter hash type */
+ u32 num_mc_addrs; /* Number of current Multicast addrs */
+ u8 curr_mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS]; /* Individual address currently programmed in MAC */
+ u32 num_tx_desc; /* Number of Transmit descriptors */
+ u32 num_rx_desc; /* Number of Receive descriptors */
+ u32 rx_buffer_size; /* Size of Receive buffer */
+ bool link_up; /* true if link is valid */
+ bool adapter_stopped; /* State of adapter */
+ u16 device_id; /* device id from PCI configuration space */
+ u16 vendor_id; /* vendor id from PCI configuration space */
+ u8 revision_id; /* revision id from PCI configuration space */
+ u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */
+ u16 subsystem_id; /* subsystem id from PCI configuration space */
+ u32 bar0; /* Base Address registers */
+ u32 bar1;
+ u32 bar2;
+ u32 bar3;
+ u16 pci_cmd_word; /* PCI command register id from PCI configuration space */
__le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */
unsigned long io_base; /* Our I/O mapped location */
- uint32_t lastLFC;
- uint32_t lastRFC;
+ u32 lastLFC;
+ u32 lastRFC;
};
/* Statistics reported by the hardware */
struct ixgb_hw_stats {
- uint64_t tprl;
- uint64_t tprh;
- uint64_t gprcl;
- uint64_t gprch;
- uint64_t bprcl;
- uint64_t bprch;
- uint64_t mprcl;
- uint64_t mprch;
- uint64_t uprcl;
- uint64_t uprch;
- uint64_t vprcl;
- uint64_t vprch;
- uint64_t jprcl;
- uint64_t jprch;
- uint64_t gorcl;
- uint64_t gorch;
- uint64_t torl;
- uint64_t torh;
- uint64_t rnbc;
- uint64_t ruc;
- uint64_t roc;
- uint64_t rlec;
- uint64_t crcerrs;
- uint64_t icbc;
- uint64_t ecbc;
- uint64_t mpc;
- uint64_t tptl;
- uint64_t tpth;
- uint64_t gptcl;
- uint64_t gptch;
- uint64_t bptcl;
- uint64_t bptch;
- uint64_t mptcl;
- uint64_t mptch;
- uint64_t uptcl;
- uint64_t uptch;
- uint64_t vptcl;
- uint64_t vptch;
- uint64_t jptcl;
- uint64_t jptch;
- uint64_t gotcl;
- uint64_t gotch;
- uint64_t totl;
- uint64_t toth;
- uint64_t dc;
- uint64_t plt64c;
- uint64_t tsctc;
- uint64_t tsctfc;
- uint64_t ibic;
- uint64_t rfc;
- uint64_t lfc;
- uint64_t pfrc;
- uint64_t pftc;
- uint64_t mcfrc;
- uint64_t mcftc;
- uint64_t xonrxc;
- uint64_t xontxc;
- uint64_t xoffrxc;
- uint64_t xofftxc;
- uint64_t rjc;
+ u64 tprl;
+ u64 tprh;
+ u64 gprcl;
+ u64 gprch;
+ u64 bprcl;
+ u64 bprch;
+ u64 mprcl;
+ u64 mprch;
+ u64 uprcl;
+ u64 uprch;
+ u64 vprcl;
+ u64 vprch;
+ u64 jprcl;
+ u64 jprch;
+ u64 gorcl;
+ u64 gorch;
+ u64 torl;
+ u64 torh;
+ u64 rnbc;
+ u64 ruc;
+ u64 roc;
+ u64 rlec;
+ u64 crcerrs;
+ u64 icbc;
+ u64 ecbc;
+ u64 mpc;
+ u64 tptl;
+ u64 tpth;
+ u64 gptcl;
+ u64 gptch;
+ u64 bptcl;
+ u64 bptch;
+ u64 mptcl;
+ u64 mptch;
+ u64 uptcl;
+ u64 uptch;
+ u64 vptcl;
+ u64 vptch;
+ u64 jptcl;
+ u64 jptch;
+ u64 gotcl;
+ u64 gotch;
+ u64 totl;
+ u64 toth;
+ u64 dc;
+ u64 plt64c;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 ibic;
+ u64 rfc;
+ u64 lfc;
+ u64 pfrc;
+ u64 pftc;
+ u64 mcfrc;
+ u64 mcftc;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 rjc;
};
/* Function Prototypes */
-extern boolean_t ixgb_adapter_stop(struct ixgb_hw *hw);
-extern boolean_t ixgb_init_hw(struct ixgb_hw *hw);
-extern boolean_t ixgb_adapter_start(struct ixgb_hw *hw);
+extern bool ixgb_adapter_stop(struct ixgb_hw *hw);
+extern bool ixgb_init_hw(struct ixgb_hw *hw);
+extern bool ixgb_adapter_start(struct ixgb_hw *hw);
extern void ixgb_check_for_link(struct ixgb_hw *hw);
-extern boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw);
+extern bool ixgb_check_for_bad_link(struct ixgb_hw *hw);
extern void ixgb_rar_set(struct ixgb_hw *hw,
- uint8_t *addr,
- uint32_t index);
+ u8 *addr,
+ u32 index);
/* Filters (multicast, vlan, receive) */
extern void ixgb_mc_addr_list_update(struct ixgb_hw *hw,
- uint8_t *mc_addr_list,
- uint32_t mc_addr_count,
- uint32_t pad);
+ u8 *mc_addr_list,
+ u32 mc_addr_count,
+ u32 pad);
/* Vfta functions */
extern void ixgb_write_vfta(struct ixgb_hw *hw,
- uint32_t offset,
- uint32_t value);
+ u32 offset,
+ u32 value);
/* Access functions to eeprom data */
-void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr);
-uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_device_id(struct ixgb_hw *hw);
-boolean_t ixgb_get_eeprom_data(struct ixgb_hw *hw);
-__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index);
+void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr);
+u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw);
+u16 ixgb_get_ee_device_id(struct ixgb_hw *hw);
+bool ixgb_get_eeprom_data(struct ixgb_hw *hw);
+__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index);
/* Everything else */
void ixgb_led_on(struct ixgb_hw *hw);
void ixgb_led_off(struct ixgb_hw *hw);
void ixgb_write_pci_cfg(struct ixgb_hw *hw,
- uint32_t reg,
- uint16_t * value);
+ u32 reg,
+ u16 * value);
#endif /* _IXGB_HW_H_ */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 6738b4d097fe6fc4e50058c8a42811e6b7f4a2d4..cb8daddafa29376826affbe19d102c6bd73154fd 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -67,7 +67,7 @@ MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl);
/* Local Function Prototypes */
int ixgb_up(struct ixgb_adapter *adapter);
-void ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog);
+void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog);
void ixgb_reset(struct ixgb_adapter *adapter);
int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
@@ -94,22 +94,22 @@ static struct net_device_stats *ixgb_get_stats(struct net_device *netdev);
static int ixgb_change_mtu(struct net_device *netdev, int new_mtu);
static int ixgb_set_mac(struct net_device *netdev, void *p);
static irqreturn_t ixgb_intr(int irq, void *data);
-static boolean_t ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
+static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
#ifdef CONFIG_IXGB_NAPI
static int ixgb_clean(struct napi_struct *napi, int budget);
-static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter,
- int *work_done, int work_to_do);
+static bool ixgb_clean_rx_irq(struct ixgb_adapter *adapter,
+ int *work_done, int work_to_do);
#else
-static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter);
+static bool ixgb_clean_rx_irq(struct ixgb_adapter *adapter);
#endif
static void ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter);
static void ixgb_tx_timeout(struct net_device *dev);
static void ixgb_tx_timeout_task(struct work_struct *work);
static void ixgb_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp);
-static void ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
-static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static void ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -197,7 +197,6 @@ module_exit(ixgb_exit_module);
static void
ixgb_irq_disable(struct ixgb_adapter *adapter)
{
- atomic_inc(&adapter->irq_sem);
IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
IXGB_WRITE_FLUSH(&adapter->hw);
synchronize_irq(adapter->pdev->irq);
@@ -211,14 +210,12 @@ ixgb_irq_disable(struct ixgb_adapter *adapter)
static void
ixgb_irq_enable(struct ixgb_adapter *adapter)
{
- if(atomic_dec_and_test(&adapter->irq_sem)) {
- u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
- IXGB_INT_TXDW | IXGB_INT_LSC;
- if (adapter->hw.subsystem_vendor_id == SUN_SUBVENDOR_ID)
- val |= IXGB_INT_GPI0;
- IXGB_WRITE_REG(&adapter->hw, IMS, val);
- IXGB_WRITE_FLUSH(&adapter->hw);
- }
+ u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
+ IXGB_INT_TXDW | IXGB_INT_LSC;
+ if (adapter->hw.subsystem_vendor_id == SUN_SUBVENDOR_ID)
+ val |= IXGB_INT_GPI0;
+ IXGB_WRITE_REG(&adapter->hw, IMS, val);
+ IXGB_WRITE_FLUSH(&adapter->hw);
}
int
@@ -274,7 +271,7 @@ ixgb_up(struct ixgb_adapter *adapter)
if(hw->max_frame_size >
IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
- uint32_t ctrl0 = IXGB_READ_REG(hw, CTRL0);
+ u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
if(!(ctrl0 & IXGB_CTRL0_JFE)) {
ctrl0 |= IXGB_CTRL0_JFE;
@@ -283,26 +280,30 @@ ixgb_up(struct ixgb_adapter *adapter)
}
}
- mod_timer(&adapter->watchdog_timer, jiffies);
+ clear_bit(__IXGB_DOWN, &adapter->flags);
#ifdef CONFIG_IXGB_NAPI
napi_enable(&adapter->napi);
#endif
ixgb_irq_enable(adapter);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
return 0;
}
void
-ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog)
+ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
{
struct net_device *netdev = adapter->netdev;
+ /* prevent the interrupt handler from restarting watchdog */
+ set_bit(__IXGB_DOWN, &adapter->flags);
+
#ifdef CONFIG_IXGB_NAPI
napi_disable(&adapter->napi);
- atomic_set(&adapter->irq_sem, 0);
#endif
-
+ /* waiting for NAPI to complete can re-enable interrupts */
ixgb_irq_disable(adapter);
free_irq(adapter->pdev->irq, netdev);
@@ -589,9 +590,9 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
/* enable flow control to be programmed */
hw->fc.send_xon = 1;
- atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->tx_lock);
+ set_bit(__IXGB_DOWN, &adapter->flags);
return 0;
}
@@ -656,7 +657,7 @@ ixgb_close(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- ixgb_down(adapter, TRUE);
+ ixgb_down(adapter, true);
ixgb_free_tx_resources(adapter);
ixgb_free_rx_resources(adapter);
@@ -717,9 +718,9 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
static void
ixgb_configure_tx(struct ixgb_adapter *adapter)
{
- uint64_t tdba = adapter->tx_ring.dma;
- uint32_t tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc);
- uint32_t tctl;
+ u64 tdba = adapter->tx_ring.dma;
+ u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc);
+ u32 tctl;
struct ixgb_hw *hw = &adapter->hw;
/* Setup the Base and Length of the Tx Descriptor Ring
@@ -805,7 +806,7 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
static void
ixgb_setup_rctl(struct ixgb_adapter *adapter)
{
- uint32_t rctl;
+ u32 rctl;
rctl = IXGB_READ_REG(&adapter->hw, RCTL);
@@ -840,12 +841,12 @@ ixgb_setup_rctl(struct ixgb_adapter *adapter)
static void
ixgb_configure_rx(struct ixgb_adapter *adapter)
{
- uint64_t rdba = adapter->rx_ring.dma;
- uint32_t rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc);
+ u64 rdba = adapter->rx_ring.dma;
+ u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc);
struct ixgb_hw *hw = &adapter->hw;
- uint32_t rctl;
- uint32_t rxcsum;
- uint32_t rxdctl;
+ u32 rctl;
+ u32 rxcsum;
+ u32 rxdctl;
/* make sure receives are disabled while setting up the descriptors */
@@ -881,7 +882,7 @@ ixgb_configure_rx(struct ixgb_adapter *adapter)
IXGB_WRITE_REG(hw, RXDCTL, rxdctl);
/* Enable Receive Checksum Offload for TCP and UDP */
- if(adapter->rx_csum == TRUE) {
+ if (adapter->rx_csum) {
rxcsum = IXGB_READ_REG(hw, RXCSUM);
rxcsum |= IXGB_RXCSUM_TUOFL;
IXGB_WRITE_REG(hw, RXCSUM, rxcsum);
@@ -1078,7 +1079,7 @@ ixgb_set_multi(struct net_device *netdev)
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
- uint32_t rctl;
+ u32 rctl;
int i;
/* Check for Promiscuous and All Multicast modes */
@@ -1098,7 +1099,7 @@ ixgb_set_multi(struct net_device *netdev)
rctl |= IXGB_RCTL_MPE;
IXGB_WRITE_REG(hw, RCTL, rctl);
} else {
- uint8_t mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES *
+ u8 mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES *
IXGB_ETH_LENGTH_OF_ADDRESS];
IXGB_WRITE_REG(hw, RCTL, rctl);
@@ -1164,7 +1165,7 @@ ixgb_watchdog(unsigned long data)
}
/* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = TRUE;
+ adapter->detect_tx_hung = true;
/* generate an interrupt to force clean up of any stragglers */
IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW);
@@ -1182,8 +1183,8 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
{
struct ixgb_context_desc *context_desc;
unsigned int i;
- uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
- uint16_t ipcse, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ u16 ipcse, tucse, mss;
int err;
if (likely(skb_is_gso(skb))) {
@@ -1243,12 +1244,12 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
return 0;
}
-static boolean_t
+static bool
ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
{
struct ixgb_context_desc *context_desc;
unsigned int i;
- uint8_t css, cso;
+ u8 css, cso;
if(likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
struct ixgb_buffer *buffer_info;
@@ -1264,7 +1265,7 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
context_desc->tucso = cso;
context_desc->tucse = 0;
/* zero out any previously existing data in one instruction */
- *(uint32_t *)&(context_desc->ipcss) = 0;
+ *(u32 *)&(context_desc->ipcss) = 0;
context_desc->status = 0;
context_desc->hdr_len = 0;
context_desc->mss = 0;
@@ -1275,10 +1276,10 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
if(++i == adapter->tx_ring.count) i = 0;
adapter->tx_ring.next_to_use = i;
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
#define IXGB_MAX_TXD_PWR 14
@@ -1371,9 +1372,9 @@ ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
struct ixgb_tx_desc *tx_desc = NULL;
struct ixgb_buffer *buffer_info;
- uint32_t cmd_type_len = adapter->tx_cmd_type;
- uint8_t status = 0;
- uint8_t popts = 0;
+ u32 cmd_type_len = adapter->tx_cmd_type;
+ u8 status = 0;
+ u8 popts = 0;
unsigned int i;
if(tx_flags & IXGB_TX_FLAGS_TSO) {
@@ -1464,14 +1465,18 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
int vlan_id = 0;
int tso;
+ if (test_bit(__IXGB_DOWN, &adapter->flags)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
if(skb->len <= 0) {
dev_kfree_skb_any(skb);
return 0;
}
#ifdef NETIF_F_LLTX
- local_irq_save(flags);
- if (!spin_trylock(&adapter->tx_lock)) {
+ if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) {
/* Collision - tell upper layer to requeue */
local_irq_restore(flags);
return NETDEV_TX_LOCKED;
@@ -1548,7 +1553,7 @@ ixgb_tx_timeout_task(struct work_struct *work)
container_of(work, struct ixgb_adapter, tx_timeout_task);
adapter->tx_timeout_count++;
- ixgb_down(adapter, TRUE);
+ ixgb_down(adapter, true);
ixgb_up(adapter);
}
@@ -1595,7 +1600,7 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu = new_mtu;
if ((old_max_frame != max_frame) && netif_running(netdev)) {
- ixgb_down(adapter, TRUE);
+ ixgb_down(adapter, true);
ixgb_up(adapter);
}
@@ -1745,7 +1750,7 @@ ixgb_intr(int irq, void *data)
struct net_device *netdev = data;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
- uint32_t icr = IXGB_READ_REG(hw, ICR);
+ u32 icr = IXGB_READ_REG(hw, ICR);
#ifndef CONFIG_IXGB_NAPI
unsigned int i;
#endif
@@ -1753,9 +1758,9 @@ ixgb_intr(int irq, void *data)
if(unlikely(!icr))
return IRQ_NONE; /* Not our interrupt */
- if(unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC))) {
- mod_timer(&adapter->watchdog_timer, jiffies);
- }
+ if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)))
+ if (!test_bit(__IXGB_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies);
#ifdef CONFIG_IXGB_NAPI
if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
@@ -1764,7 +1769,6 @@ ixgb_intr(int irq, void *data)
of the posted write is intentionally left out.
*/
- atomic_inc(&adapter->irq_sem);
IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
__netif_rx_schedule(netdev, &adapter->napi);
}
@@ -1812,7 +1816,7 @@ ixgb_clean(struct napi_struct *napi, int budget)
* @adapter: board private structure
**/
-static boolean_t
+static bool
ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
{
struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
@@ -1820,7 +1824,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
struct ixgb_tx_desc *tx_desc, *eop_desc;
struct ixgb_buffer *buffer_info;
unsigned int i, eop;
- boolean_t cleaned = FALSE;
+ bool cleaned = false;
i = tx_ring->next_to_clean;
eop = tx_ring->buffer_info[i].next_to_watch;
@@ -1828,7 +1832,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
while(eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
- for(cleaned = FALSE; !cleaned; ) {
+ for (cleaned = false; !cleaned; ) {
tx_desc = IXGB_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
@@ -1839,7 +1843,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
- *(uint32_t *)&(tx_desc->status) = 0;
+ *(u32 *)&(tx_desc->status) = 0;
cleaned = (i == eop);
if(++i == tx_ring->count) i = 0;
@@ -1862,7 +1866,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
if(adapter->detect_tx_hung) {
/* detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i */
- adapter->detect_tx_hung = FALSE;
+ adapter->detect_tx_hung = false;
if (tx_ring->buffer_info[eop].dma &&
time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ)
&& !(IXGB_READ_REG(&adapter->hw, STATUS) &
@@ -1932,7 +1936,7 @@ ixgb_rx_checksum(struct ixgb_adapter *adapter,
* @adapter: board private structure
**/
-static boolean_t
+static bool
#ifdef CONFIG_IXGB_NAPI
ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
#else
@@ -1944,9 +1948,9 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter)
struct pci_dev *pdev = adapter->pdev;
struct ixgb_rx_desc *rx_desc, *next_rxd;
struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer;
- uint32_t length;
+ u32 length;
unsigned int i, j;
- boolean_t cleaned = FALSE;
+ bool cleaned = false;
i = rx_ring->next_to_clean;
rx_desc = IXGB_RX_DESC(*rx_ring, i);
@@ -1980,7 +1984,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter)
next_skb = next_buffer->skb;
prefetch(next_skb);
- cleaned = TRUE;
+ cleaned = true;
pci_unmap_single(pdev,
buffer_info->dma,
@@ -2162,7 +2166,7 @@ static void
ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- uint32_t ctrl, rctl;
+ u32 ctrl, rctl;
ixgb_irq_disable(adapter);
adapter->vlgrp = grp;
@@ -2193,14 +2197,16 @@ ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
}
- ixgb_irq_enable(adapter);
+ /* don't enable interrupts unless we are UP */
+ if (adapter->netdev->flags & IFF_UP)
+ ixgb_irq_enable(adapter);
}
static void
-ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
+ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- uint32_t vfta, index;
+ u32 vfta, index;
/* add VID to filter table */
@@ -2211,18 +2217,20 @@ ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
}
static void
-ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
+ixgb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- uint32_t vfta, index;
+ u32 vfta, index;
ixgb_irq_disable(adapter);
vlan_group_set_device(adapter->vlgrp, vid, NULL);
- ixgb_irq_enable(adapter);
+ /* don't enable interrupts unless we are UP */
+ if (adapter->netdev->flags & IFF_UP)
+ ixgb_irq_enable(adapter);
- /* remove VID from filter table*/
+ /* remove VID from filter table */
index = (vid >> 5) & 0x7F;
vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
@@ -2236,7 +2244,7 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter)
ixgb_vlan_rx_register(adapter->netdev, adapter->vlgrp);
if(adapter->vlgrp) {
- uint16_t vid;
+ u16 vid;
for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
if(!vlan_group_get_device(adapter->vlgrp, vid))
continue;
@@ -2277,7 +2285,7 @@ static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
struct ixgb_adapter *adapter = netdev_priv(netdev);
if(netif_running(netdev))
- ixgb_down(adapter, TRUE);
+ ixgb_down(adapter, true);
pci_disable_device(pdev);
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h
index 9e04a6b3ae0d2a5338d603b7e23787bb4fcee174..4be1b273e1b8794585a0918e116be36995af6335 100644
--- a/drivers/net/ixgb/ixgb_osdep.h
+++ b/drivers/net/ixgb/ixgb_osdep.h
@@ -39,13 +39,6 @@
#include
#include
-typedef enum {
-#undef FALSE
- FALSE = 0,
-#undef TRUE
- TRUE = 1
-} boolean_t;
-
#undef ASSERT
#define ASSERT(x) if(!(x)) BUG()
#define MSGOUT(S, A, B) printk(KERN_DEBUG S "\n", A, B)
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index d0bf206632ca60754edbeb80977e4b359c8ff731..d98113472a89ff1dcde99095a1b0e48450442b42 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -36,6 +36,9 @@
#include "ixgbe_type.h"
#include "ixgbe_common.h"
+#ifdef CONFIG_DCA
+#include
+#endif
#define IXGBE_ERR(args...) printk(KERN_ERR "ixgbe: " args)
@@ -120,7 +123,6 @@ struct ixgbe_queue_stats {
};
struct ixgbe_ring {
- struct ixgbe_adapter *adapter; /* backlink */
void *desc; /* descriptor ring memory */
dma_addr_t dma; /* phys. address of descriptor ring */
unsigned int size; /* length in bytes */
@@ -128,6 +130,7 @@ struct ixgbe_ring {
unsigned int next_to_use;
unsigned int next_to_clean;
+ int queue_index; /* needed for multiqueue queue management */
union {
struct ixgbe_tx_buffer *tx_buffer_info;
struct ixgbe_rx_buffer *rx_buffer_info;
@@ -136,8 +139,21 @@ struct ixgbe_ring {
u16 head;
u16 tail;
+ unsigned int total_bytes;
+ unsigned int total_packets;
+ u16 reg_idx; /* holds the special value that gets the hardware register
+ * offset associated with this ring, which is different
+ * for DCE and RSS modes */
+
+#ifdef CONFIG_DCA
+ /* cpu for tx queue */
+ int cpu;
+#endif
struct ixgbe_queue_stats stats;
+ u8 v_idx; /* maps directly to the index for this ring in the hardware
+ * vector array, can also be used for finding the bit in EICR
+ * and friends that represents the vector for this ring */
u32 eims_value;
u16 itr_register;
@@ -146,6 +162,33 @@ struct ixgbe_ring {
u16 work_limit; /* max work per interrupt */
};
+#define RING_F_VMDQ 1
+#define RING_F_RSS 2
+#define IXGBE_MAX_RSS_INDICES 16
+#define IXGBE_MAX_VMDQ_INDICES 16
+struct ixgbe_ring_feature {
+ int indices;
+ int mask;
+};
+
+#define MAX_RX_QUEUES 64
+#define MAX_TX_QUEUES 32
+
+/* MAX_MSIX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct ixgbe_q_vector {
+ struct ixgbe_adapter *adapter;
+ struct napi_struct napi;
+ DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
+ DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
+ u8 rxr_count; /* Rx ring count assigned to this vector */
+ u8 txr_count; /* Tx ring count assigned to this vector */
+ u8 tx_eitr;
+ u8 rx_eitr;
+ u32 eitr;
+};
+
/* Helper macros to switch between ints/sec and what the register uses.
* And yes, it's the same math going both ways.
*/
@@ -166,6 +209,14 @@ struct ixgbe_ring {
#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128
+#define OTHER_VECTOR 1
+#define NON_Q_VECTORS (OTHER_VECTOR)
+
+#define MAX_MSIX_Q_VECTORS 16
+#define MIN_MSIX_Q_VECTORS 2
+#define MAX_MSIX_COUNT (MAX_MSIX_Q_VECTORS + NON_Q_VECTORS)
+#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
/* board specific private data structure */
struct ixgbe_adapter {
struct timer_list watchdog_timer;
@@ -173,10 +224,16 @@ struct ixgbe_adapter {
u16 bd_number;
u16 rx_buf_len;
struct work_struct reset_task;
+ struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS];
+ char name[MAX_MSIX_COUNT][IFNAMSIZ + 5];
+
+ /* Interrupt Throttle Rate */
+ u32 itr_setting;
+ u16 eitr_low;
+ u16 eitr_high;
/* TX */
struct ixgbe_ring *tx_ring; /* One per active queue */
- struct napi_struct napi;
u64 restart_queue;
u64 lsc_int;
u64 hw_tso_ctxt;
@@ -192,22 +249,27 @@ struct ixgbe_adapter {
u64 non_eop_descs;
int num_tx_queues;
int num_rx_queues;
+ int num_msix_vectors;
+ struct ixgbe_ring_feature ring_feature[3];
struct msix_entry *msix_entries;
u64 rx_hdr_split;
u32 alloc_rx_page_failed;
u32 alloc_rx_buff_failed;
+ /* Some features need tri-state capability,
+ * thus the additional *_CAPABLE flags.
+ */
u32 flags;
-#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
+#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1 << 0)
#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 1)
-#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 2)
-#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3)
-#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4)
-
- /* Interrupt Throttle Rate */
- u32 rx_eitr;
- u32 tx_eitr;
+#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 2)
+#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3)
+#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4)
+#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 5)
+#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 6)
+#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 7)
+#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 8)
/* OS defined structs */
struct net_device *netdev;
@@ -218,7 +280,10 @@ struct ixgbe_adapter {
struct ixgbe_hw hw;
u16 msg_enable;
struct ixgbe_hw_stats stats;
- char lsc_name[IFNAMSIZ + 5];
+
+ /* Interrupt Throttle Rate */
+ u32 rx_eitr;
+ u32 tx_eitr;
unsigned long state;
u64 tx_busy;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index a119cbd8dbb8b2aad03186d12a8e2150f3752a1b..4e463778bcfd832078e58ea5213c96dc1794c131 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -246,13 +246,26 @@ static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data)
static int ixgbe_set_tso(struct net_device *netdev, u32 data)
{
-
if (data) {
netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_TSO6;
} else {
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i;
+#endif
+ netif_stop_queue(netdev);
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_stop_subqueue(netdev, i);
+#endif
netdev->features &= ~NETIF_F_TSO;
netdev->features &= ~NETIF_F_TSO6;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_start_subqueue(netdev, i);
+#endif
+ netif_start_queue(netdev);
}
return 0;
}
@@ -873,13 +886,13 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- if (adapter->rx_eitr == 0)
- ec->rx_coalesce_usecs = 0;
+ if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS)
+ ec->rx_coalesce_usecs = adapter->rx_eitr;
else
ec->rx_coalesce_usecs = 1000000 / adapter->rx_eitr;
- if (adapter->tx_eitr == 0)
- ec->tx_coalesce_usecs = 0;
+ if (adapter->tx_eitr < IXGBE_MIN_ITR_USECS)
+ ec->tx_coalesce_usecs = adapter->tx_eitr;
else
ec->tx_coalesce_usecs = 1000000 / adapter->tx_eitr;
@@ -893,22 +906,26 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
struct ixgbe_adapter *adapter = netdev_priv(netdev);
if ((ec->rx_coalesce_usecs > IXGBE_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 0) &&
+ ((ec->rx_coalesce_usecs != 0) &&
+ (ec->rx_coalesce_usecs != 1) &&
+ (ec->rx_coalesce_usecs != 3) &&
(ec->rx_coalesce_usecs < IXGBE_MIN_ITR_USECS)))
return -EINVAL;
if ((ec->tx_coalesce_usecs > IXGBE_MAX_ITR_USECS) ||
- ((ec->tx_coalesce_usecs > 0) &&
+ ((ec->tx_coalesce_usecs != 0) &&
+ (ec->tx_coalesce_usecs != 1) &&
+ (ec->tx_coalesce_usecs != 3) &&
(ec->tx_coalesce_usecs < IXGBE_MIN_ITR_USECS)))
return -EINVAL;
/* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs == 0)
- adapter->rx_eitr = 0;
+ if (ec->rx_coalesce_usecs < IXGBE_MIN_ITR_USECS)
+ adapter->rx_eitr = ec->rx_coalesce_usecs;
else
adapter->rx_eitr = (1000000 / ec->rx_coalesce_usecs);
- if (ec->tx_coalesce_usecs == 0)
- adapter->tx_eitr = 0;
+ if (ec->tx_coalesce_usecs < IXGBE_MIN_ITR_USECS)
+ adapter->tx_eitr = ec->rx_coalesce_usecs;
else
adapter->tx_eitr = (1000000 / ec->tx_coalesce_usecs);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index c2095ce531c9b7fdb9785a0dea063f45516b8f10..cb371a8c24a72244092b4353757a1e886dd4d91a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -48,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-#define DRV_VERSION "1.1.18"
+#define DRV_VERSION "1.3.18-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
static const char ixgbe_copyright[] =
"Copyright (c) 1999-2007 Intel Corporation.";
@@ -80,6 +80,16 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl);
+#ifdef CONFIG_DCA
+static int ixgbe_notify_dca(struct notifier_block *, unsigned long event,
+ void *p);
+static struct notifier_block dca_notifier = {
+ .notifier_call = ixgbe_notify_dca,
+ .next = NULL,
+ .priority = 0
+};
+#endif
+
MODULE_AUTHOR("Intel Corporation, ");
MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
MODULE_LICENSE("GPL");
@@ -256,26 +266,125 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
* sees the new next_to_clean.
*/
smp_mb();
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
+ !test_bit(__IXGBE_DOWN, &adapter->state)) {
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+ adapter->restart_queue++;
+ }
+#else
if (netif_queue_stopped(netdev) &&
!test_bit(__IXGBE_DOWN, &adapter->state)) {
netif_wake_queue(netdev);
adapter->restart_queue++;
}
+#endif
}
if (adapter->detect_tx_hung)
if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc))
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+#else
netif_stop_queue(netdev);
+#endif
if (total_tx_packets >= tx_ring->work_limit)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value);
+ tx_ring->total_bytes += total_tx_bytes;
+ tx_ring->total_packets += total_tx_packets;
adapter->net_stats.tx_bytes += total_tx_bytes;
adapter->net_stats.tx_packets += total_tx_packets;
cleaned = total_tx_packets ? true : false;
return cleaned;
}
+#ifdef CONFIG_DCA
+static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *rxr)
+{
+ u32 rxctrl;
+ int cpu = get_cpu();
+ int q = rxr - adapter->rx_ring;
+
+ if (rxr->cpu != cpu) {
+ rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q));
+ rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK;
+ rxctrl |= dca_get_tag(cpu);
+ rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
+ rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
+ rxr->cpu = cpu;
+ }
+ put_cpu();
+}
+
+static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *txr)
+{
+ u32 txctrl;
+ int cpu = get_cpu();
+ int q = txr - adapter->tx_ring;
+
+ if (txr->cpu != cpu) {
+ txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
+ txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
+ txctrl |= dca_get_tag(cpu);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
+ txr->cpu = cpu;
+ }
+ put_cpu();
+}
+
+static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
+ return;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ adapter->tx_ring[i].cpu = -1;
+ ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]);
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ adapter->rx_ring[i].cpu = -1;
+ ixgbe_update_rx_dca(adapter, &adapter->rx_ring[i]);
+ }
+}
+
+static int __ixgbe_notify_dca(struct device *dev, void *data)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ unsigned long event = *(unsigned long *)data;
+
+ switch (event) {
+ case DCA_PROVIDER_ADD:
+ adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
+ /* Always use CB2 mode, difference is masked
+ * in the CB driver. */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
+ if (dca_add_requester(dev) == 0) {
+ ixgbe_setup_dca(adapter);
+ break;
+ }
+ /* Fall Through since DCA is disabled. */
+ case DCA_PROVIDER_REMOVE:
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+ dca_remove_requester(dev);
+ adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_DCA */
/**
* ixgbe_receive_skb - Send a completed packet up the stack
* @adapter: board private structure
@@ -556,10 +665,15 @@ next_desc:
adapter->net_stats.rx_bytes += total_rx_bytes;
adapter->net_stats.rx_packets += total_rx_packets;
+ rx_ring->total_packets += total_rx_packets;
+ rx_ring->total_bytes += total_rx_bytes;
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+
return cleaned;
}
-#define IXGBE_MAX_INTR 10
+static int ixgbe_clean_rxonly(struct napi_struct *, int);
/**
* ixgbe_configure_msix - Configure MSI-X hardware
* @adapter: board private structure
@@ -569,28 +683,195 @@ next_desc:
**/
static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
{
- int i, vector = 0;
+ struct ixgbe_q_vector *q_vector;
+ int i, j, q_vectors, v_idx, r_idx;
+ u32 mask;
- for (i = 0; i < adapter->num_tx_queues; i++) {
- ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i),
- IXGBE_MSIX_VECTOR(vector));
- writel(EITR_INTS_PER_SEC_TO_REG(adapter->tx_eitr),
- adapter->hw.hw_addr + adapter->tx_ring[i].itr_register);
- vector++;
- }
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- for (i = 0; i < adapter->num_rx_queues; i++) {
- ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(i),
- IXGBE_MSIX_VECTOR(vector));
- writel(EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr),
- adapter->hw.hw_addr + adapter->rx_ring[i].itr_register);
- vector++;
+ /* Populate the IVAR table and set the ITR values to the
+ * corresponding register.
+ */
+ for (v_idx = 0; v_idx < q_vectors; v_idx++) {
+ q_vector = &adapter->q_vector[v_idx];
+ /* XXX for_each_bit(...) */
+ r_idx = find_first_bit(q_vector->rxr_idx,
+ adapter->num_rx_queues);
+
+ for (i = 0; i < q_vector->rxr_count; i++) {
+ j = adapter->rx_ring[r_idx].reg_idx;
+ ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(j), v_idx);
+ r_idx = find_next_bit(q_vector->rxr_idx,
+ adapter->num_rx_queues,
+ r_idx + 1);
+ }
+ r_idx = find_first_bit(q_vector->txr_idx,
+ adapter->num_tx_queues);
+
+ for (i = 0; i < q_vector->txr_count; i++) {
+ j = adapter->tx_ring[r_idx].reg_idx;
+ ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(j), v_idx);
+ r_idx = find_next_bit(q_vector->txr_idx,
+ adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ /* if this is a tx only vector use half the irq (tx) rate */
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ q_vector->eitr = adapter->tx_eitr;
+ else
+ /* rx only or mixed */
+ q_vector->eitr = adapter->rx_eitr;
+
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx),
+ EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
}
- vector = adapter->num_tx_queues + adapter->num_rx_queues;
- ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX,
- IXGBE_MSIX_VECTOR(vector));
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(vector), 1950);
+ ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, v_idx);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950);
+
+ /* set up to autoclear timer, lsc, and the vectors */
+ mask = IXGBE_EIMS_ENABLE_MASK;
+ mask &= ~IXGBE_EIMS_OTHER;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * ixgbe_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @eitr: eitr setting (ints per sec) to give last timeslice
+ * @itr_setting: current throttle rate in ints/second
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see ixgbe_param.c)
+ **/
+static u8 ixgbe_update_itr(struct ixgbe_adapter *adapter,
+ u32 eitr, u8 itr_setting,
+ int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ u32 timepassed_us;
+ u64 bytes_perint;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+
+ /* simple throttlerate management
+ * 0-20MB/s lowest (100000 ints/s)
+ * 20-100MB/s low (20000 ints/s)
+ * 100-1249MB/s bulk (8000 ints/s)
+ */
+ /* what was last interrupt timeslice? */
+ timepassed_us = 1000000/eitr;
+ bytes_perint = bytes / timepassed_us; /* bytes/usec */
+
+ switch (itr_setting) {
+ case lowest_latency:
+ if (bytes_perint > adapter->eitr_low)
+ retval = low_latency;
+ break;
+ case low_latency:
+ if (bytes_perint > adapter->eitr_high)
+ retval = bulk_latency;
+ else if (bytes_perint <= adapter->eitr_low)
+ retval = lowest_latency;
+ break;
+ case bulk_latency:
+ if (bytes_perint <= adapter->eitr_high)
+ retval = low_latency;
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
+{
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 new_itr;
+ u8 current_itr, ret_itr;
+ int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) /
+ sizeof(struct ixgbe_q_vector);
+ struct ixgbe_ring *rx_ring, *tx_ring;
+
+ r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->txr_count; i++) {
+ tx_ring = &(adapter->tx_ring[r_idx]);
+ ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
+ q_vector->tx_eitr,
+ tx_ring->total_packets,
+ tx_ring->total_bytes);
+ /* if the result for this queue would decrease interrupt
+ * rate for this vector then use that result */
+ q_vector->tx_eitr = ((q_vector->tx_eitr > ret_itr) ?
+ q_vector->tx_eitr - 1 : ret_itr);
+ r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rxr_count; i++) {
+ rx_ring = &(adapter->rx_ring[r_idx]);
+ ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
+ q_vector->rx_eitr,
+ rx_ring->total_packets,
+ rx_ring->total_bytes);
+ /* if the result for this queue would decrease interrupt
+ * rate for this vector then use that result */
+ q_vector->rx_eitr = ((q_vector->rx_eitr > ret_itr) ?
+ q_vector->rx_eitr - 1 : ret_itr);
+ r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ current_itr = max(q_vector->rx_eitr, q_vector->tx_eitr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 100000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ default:
+ new_itr = 8000;
+ break;
+ }
+
+ if (new_itr != q_vector->eitr) {
+ u32 itr_reg;
+ /* do an exponential smoothing */
+ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
+ q_vector->eitr = new_itr;
+ itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
+ /* must write high and low 16 bits to reset counter */
+ DPRINTK(TX_ERR, DEBUG, "writing eitr(%d): %08X\n", v_idx,
+ itr_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg | (itr_reg)<<16);
+ }
+
+ return;
}
static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
@@ -614,153 +895,302 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
{
- struct ixgbe_ring *txr = data;
- struct ixgbe_adapter *adapter = txr->adapter;
+ struct ixgbe_q_vector *q_vector = data;
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *txr;
+ int i, r_idx;
- ixgbe_clean_tx_irq(adapter, txr);
+ if (!q_vector->txr_count)
+ return IRQ_HANDLED;
+
+ r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->txr_count; i++) {
+ txr = &(adapter->tx_ring[r_idx]);
+#ifdef CONFIG_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_tx_dca(adapter, txr);
+#endif
+ txr->total_bytes = 0;
+ txr->total_packets = 0;
+ ixgbe_clean_tx_irq(adapter, txr);
+ r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
return IRQ_HANDLED;
}
+/**
+ * ixgbe_msix_clean_rx - single unshared vector rx clean (all queues)
+ * @irq: unused
+ * @data: pointer to our q_vector struct for this interrupt vector
+ **/
static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
{
- struct ixgbe_ring *rxr = data;
- struct ixgbe_adapter *adapter = rxr->adapter;
+ struct ixgbe_q_vector *q_vector = data;
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *rxr;
+ int r_idx;
+
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ if (!q_vector->rxr_count)
+ return IRQ_HANDLED;
+
+ rxr = &(adapter->rx_ring[r_idx]);
+ /* disable interrupts on this vector only */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->v_idx);
+ rxr->total_bytes = 0;
+ rxr->total_packets = 0;
+ netif_rx_schedule(adapter->netdev, &q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
+{
+ ixgbe_msix_clean_rx(irq, data);
+ ixgbe_msix_clean_tx(irq, data);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->eims_value);
- netif_rx_schedule(adapter->netdev, &adapter->napi);
return IRQ_HANDLED;
}
+/**
+ * ixgbe_clean_rxonly - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ **/
static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
{
- struct ixgbe_adapter *adapter = container_of(napi,
- struct ixgbe_adapter, napi);
- struct net_device *netdev = adapter->netdev;
+ struct ixgbe_q_vector *q_vector =
+ container_of(napi, struct ixgbe_q_vector, napi);
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *rxr;
int work_done = 0;
- struct ixgbe_ring *rxr = adapter->rx_ring;
+ long r_idx;
- /* Keep link state information with original netdev */
- if (!netif_carrier_ok(netdev))
- goto quit_polling;
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ rxr = &(adapter->rx_ring[r_idx]);
+#ifdef CONFIG_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_rx_dca(adapter, rxr);
+#endif
ixgbe_clean_rx_irq(adapter, rxr, &work_done, budget);
- /* If no Tx and not enough Rx work done, exit the polling mode */
- if ((work_done < budget) || !netif_running(netdev)) {
-quit_polling:
- netif_rx_complete(netdev, napi);
+ /* If all Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ netif_rx_complete(adapter->netdev, napi);
+ if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS)
+ ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS,
- rxr->eims_value);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rxr->v_idx);
}
return work_done;
}
+static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
+ int r_idx)
+{
+ a->q_vector[v_idx].adapter = a;
+ set_bit(r_idx, a->q_vector[v_idx].rxr_idx);
+ a->q_vector[v_idx].rxr_count++;
+ a->rx_ring[r_idx].v_idx = 1 << v_idx;
+}
+
+static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
+ int r_idx)
+{
+ a->q_vector[v_idx].adapter = a;
+ set_bit(r_idx, a->q_vector[v_idx].txr_idx);
+ a->q_vector[v_idx].txr_count++;
+ a->tx_ring[r_idx].v_idx = 1 << v_idx;
+}
+
/**
- * ixgbe_setup_msix - Initialize MSI-X interrupts
+ * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors
+ * @adapter: board private structure to initialize
+ * @vectors: allotted vector count for descriptor rings
*
- * ixgbe_setup_msix allocates MSI-X vectors and requests
- * interrutps from the kernel.
+ * This function maps descriptor rings to the queue-specific vectors
+ * we were allotted through the MSI-X enabling code. Ideally, we'd have
+ * one vector per ring/queue, but on a constrained vector budget, we
+ * group the rings as "efficiently" as possible. You would add new
+ * mapping configurations in here.
**/
-static int ixgbe_setup_msix(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int i, int_vector = 0, err = 0;
- int max_msix_count;
+static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter,
+ int vectors)
+{
+ int v_start = 0;
+ int rxr_idx = 0, txr_idx = 0;
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int i, j;
+ int rqpv, tqpv;
+ int err = 0;
+
+ /* No mapping required if MSI-X is disabled. */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+ goto out;
- /* +1 for the LSC interrupt */
- max_msix_count = adapter->num_rx_queues + adapter->num_tx_queues + 1;
- adapter->msix_entries = kcalloc(max_msix_count,
- sizeof(struct msix_entry), GFP_KERNEL);
- if (!adapter->msix_entries)
- return -ENOMEM;
+ /*
+ * The ideal configuration...
+ * We have enough vectors to map one per queue.
+ */
+ if (vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
+ for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
+ map_vector_to_rxq(adapter, v_start, rxr_idx);
- for (i = 0; i < max_msix_count; i++)
- adapter->msix_entries[i].entry = i;
+ for (; txr_idx < txr_remaining; v_start++, txr_idx++)
+ map_vector_to_txq(adapter, v_start, txr_idx);
- err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- max_msix_count);
- if (err)
goto out;
+ }
- for (i = 0; i < adapter->num_tx_queues; i++) {
- sprintf(adapter->tx_ring[i].name, "%s-tx%d", netdev->name, i);
- err = request_irq(adapter->msix_entries[int_vector].vector,
- &ixgbe_msix_clean_tx,
- 0,
- adapter->tx_ring[i].name,
- &(adapter->tx_ring[i]));
- if (err) {
- DPRINTK(PROBE, ERR,
- "request_irq failed for MSIX interrupt "
- "Error: %d\n", err);
- goto release_irqs;
+ /*
+ * If we don't have enough vectors for a 1-to-1
+ * mapping, we'll have to group them so there are
+ * multiple queues per vector.
+ */
+ /* Re-adjusting *qpv takes care of the remainder. */
+ for (i = v_start; i < vectors; i++) {
+ rqpv = DIV_ROUND_UP(rxr_remaining, vectors - i);
+ for (j = 0; j < rqpv; j++) {
+ map_vector_to_rxq(adapter, i, rxr_idx);
+ rxr_idx++;
+ rxr_remaining--;
+ }
+ }
+ for (i = v_start; i < vectors; i++) {
+ tqpv = DIV_ROUND_UP(txr_remaining, vectors - i);
+ for (j = 0; j < tqpv; j++) {
+ map_vector_to_txq(adapter, i, txr_idx);
+ txr_idx++;
+ txr_remaining--;
}
- adapter->tx_ring[i].eims_value =
- (1 << IXGBE_MSIX_VECTOR(int_vector));
- adapter->tx_ring[i].itr_register = IXGBE_EITR(int_vector);
- int_vector++;
}
- for (i = 0; i < adapter->num_rx_queues; i++) {
- if (strlen(netdev->name) < (IFNAMSIZ - 5))
- sprintf(adapter->rx_ring[i].name,
- "%s-rx%d", netdev->name, i);
- else
- memcpy(adapter->rx_ring[i].name,
- netdev->name, IFNAMSIZ);
- err = request_irq(adapter->msix_entries[int_vector].vector,
- &ixgbe_msix_clean_rx, 0,
- adapter->rx_ring[i].name,
- &(adapter->rx_ring[i]));
+out:
+ return err;
+}
+
+/**
+ * ixgbe_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * ixgbe_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ irqreturn_t (*handler)(int, void *);
+ int i, vector, q_vectors, err;
+
+ /* Decrement for Other and TCP Timer vectors */
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /* Map the Tx/Rx rings to the vectors we were allotted. */
+ err = ixgbe_map_rings_to_vectors(adapter, q_vectors);
+ if (err)
+ goto out;
+
+#define SET_HANDLER(_v) ((!(_v)->rxr_count) ? &ixgbe_msix_clean_tx : \
+ (!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \
+ &ixgbe_msix_clean_many)
+ for (vector = 0; vector < q_vectors; vector++) {
+ handler = SET_HANDLER(&adapter->q_vector[vector]);
+ sprintf(adapter->name[vector], "%s:v%d-%s",
+ netdev->name, vector,
+ (handler == &ixgbe_msix_clean_rx) ? "Rx" :
+ ((handler == &ixgbe_msix_clean_tx) ? "Tx" : "TxRx"));
+ err = request_irq(adapter->msix_entries[vector].vector,
+ handler, 0, adapter->name[vector],
+ &(adapter->q_vector[vector]));
if (err) {
DPRINTK(PROBE, ERR,
"request_irq failed for MSIX interrupt "
"Error: %d\n", err);
- goto release_irqs;
+ goto free_queue_irqs;
}
-
- adapter->rx_ring[i].eims_value =
- (1 << IXGBE_MSIX_VECTOR(int_vector));
- adapter->rx_ring[i].itr_register = IXGBE_EITR(int_vector);
- int_vector++;
}
- sprintf(adapter->lsc_name, "%s-lsc", netdev->name);
- err = request_irq(adapter->msix_entries[int_vector].vector,
- &ixgbe_msix_lsc, 0, adapter->lsc_name, netdev);
+ sprintf(adapter->name[vector], "%s:lsc", netdev->name);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
if (err) {
DPRINTK(PROBE, ERR,
"request_irq for msix_lsc failed: %d\n", err);
- goto release_irqs;
+ goto free_queue_irqs;
}
- /* FIXME: implement netif_napi_remove() instead */
- adapter->napi.poll = ixgbe_clean_rxonly;
- adapter->flags |= IXGBE_FLAG_MSIX_ENABLED;
return 0;
-release_irqs:
- int_vector--;
- for (; int_vector >= adapter->num_tx_queues; int_vector--)
- free_irq(adapter->msix_entries[int_vector].vector,
- &(adapter->rx_ring[int_vector -
- adapter->num_tx_queues]));
-
- for (; int_vector >= 0; int_vector--)
- free_irq(adapter->msix_entries[int_vector].vector,
- &(adapter->tx_ring[int_vector]));
-out:
+free_queue_irqs:
+ for (i = vector - 1; i >= 0; i--)
+ free_irq(adapter->msix_entries[--vector].vector,
+ &(adapter->q_vector[i]));
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ pci_disable_msix(adapter->pdev);
kfree(adapter->msix_entries);
adapter->msix_entries = NULL;
- adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+out:
return err;
}
+static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_q_vector *q_vector = adapter->q_vector;
+ u8 current_itr;
+ u32 new_itr = q_vector->eitr;
+ struct ixgbe_ring *rx_ring = &adapter->rx_ring[0];
+ struct ixgbe_ring *tx_ring = &adapter->tx_ring[0];
+
+ q_vector->tx_eitr = ixgbe_update_itr(adapter, new_itr,
+ q_vector->tx_eitr,
+ tx_ring->total_packets,
+ tx_ring->total_bytes);
+ q_vector->rx_eitr = ixgbe_update_itr(adapter, new_itr,
+ q_vector->rx_eitr,
+ rx_ring->total_packets,
+ rx_ring->total_bytes);
+
+ current_itr = max(q_vector->rx_eitr, q_vector->tx_eitr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 100000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 8000;
+ break;
+ default:
+ break;
+ }
+
+ if (new_itr != q_vector->eitr) {
+ u32 itr_reg;
+ /* do an exponential smoothing */
+ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
+ q_vector->eitr = new_itr;
+ itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
+ /* must write high and low 16 bits to reset counter */
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(0), itr_reg | (itr_reg)<<16);
+ }
+
+ return;
+}
+
+static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter);
+
/**
- * ixgbe_intr - Interrupt Handler
+ * ixgbe_intr - legacy mode Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
* @pt_regs: CPU registers structure
@@ -772,8 +1202,10 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
struct ixgbe_hw *hw = &adapter->hw;
u32 eicr;
- eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
+ /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read
+ * therefore no explict interrupt disable is necessary */
+ eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
if (!eicr)
return IRQ_NONE; /* Not our interrupt */
@@ -782,16 +1214,33 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
if (!test_bit(__IXGBE_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer, jiffies);
}
- if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
- /* Disable interrupts and register for poll. The flush of the
- * posted write is intentionally left out. */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
- __netif_rx_schedule(netdev, &adapter->napi);
+
+
+ if (netif_rx_schedule_prep(netdev, &adapter->q_vector[0].napi)) {
+ adapter->tx_ring[0].total_packets = 0;
+ adapter->tx_ring[0].total_bytes = 0;
+ adapter->rx_ring[0].total_packets = 0;
+ adapter->rx_ring[0].total_bytes = 0;
+ /* would disable interrupts here but EIAM disabled it */
+ __netif_rx_schedule(netdev, &adapter->q_vector[0].napi);
}
return IRQ_HANDLED;
}
+static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
+{
+ int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ for (i = 0; i < q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
+ bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
+ bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
+ q_vector->rxr_count = 0;
+ q_vector->txr_count = 0;
+ }
+}
+
/**
* ixgbe_request_irq - initialize interrupts
* @adapter: board private structure
@@ -799,40 +1248,24 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
* Attempts to configure interrupts using the best available
* capabilities of the hardware and kernel.
**/
-static int ixgbe_request_irq(struct ixgbe_adapter *adapter, u32 *num_rx_queues)
+static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int flags, err;
- irq_handler_t handler = ixgbe_intr;
-
- flags = IRQF_SHARED;
-
- err = ixgbe_setup_msix(adapter);
- if (!err)
- goto request_done;
-
- /*
- * if we can't do MSI-X, fall through and try MSI
- * No need to reallocate memory since we're decreasing the number of
- * queues. We just won't use the other ones, also it is freed correctly
- * on ixgbe_remove.
- */
- *num_rx_queues = 1;
+ int err;
- /* do MSI */
- err = pci_enable_msi(adapter->pdev);
- if (!err) {
- adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
- flags &= ~IRQF_SHARED;
- handler = &ixgbe_intr;
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ err = ixgbe_request_msix_irqs(adapter);
+ } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+ err = request_irq(adapter->pdev->irq, &ixgbe_intr, 0,
+ netdev->name, netdev);
+ } else {
+ err = request_irq(adapter->pdev->irq, &ixgbe_intr, IRQF_SHARED,
+ netdev->name, netdev);
}
- err = request_irq(adapter->pdev->irq, handler, flags,
- netdev->name, netdev);
if (err)
DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err);
-request_done:
return err;
}
@@ -841,28 +1274,22 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
struct net_device *netdev = adapter->netdev;
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- int i;
+ int i, q_vectors;
- for (i = 0; i < adapter->num_tx_queues; i++)
- free_irq(adapter->msix_entries[i].vector,
- &(adapter->tx_ring[i]));
- for (i = 0; i < adapter->num_rx_queues; i++)
- free_irq(adapter->msix_entries[i +
- adapter->num_tx_queues].vector,
- &(adapter->rx_ring[i]));
- i = adapter->num_rx_queues + adapter->num_tx_queues;
+ q_vectors = adapter->num_msix_vectors;
+
+ i = q_vectors - 1;
free_irq(adapter->msix_entries[i].vector, netdev);
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
- return;
- }
- free_irq(adapter->pdev->irq, netdev);
- if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
- pci_disable_msi(adapter->pdev);
- adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
+ i--;
+ for (; i >= 0; i--) {
+ free_irq(adapter->msix_entries[i].vector,
+ &(adapter->q_vector[i]));
+ }
+
+ ixgbe_reset_q_vectors(adapter);
+ } else {
+ free_irq(adapter->pdev->irq, netdev);
}
}
@@ -874,7 +1301,13 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
{
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
IXGBE_WRITE_FLUSH(&adapter->hw);
- synchronize_irq(adapter->pdev->irq);
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int i;
+ for (i = 0; i < adapter->num_msix_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
}
/**
@@ -883,12 +1316,9 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
**/
static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
{
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC,
- (IXGBE_EIMS_ENABLE_MASK &
- ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC)));
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS,
- IXGBE_EIMS_ENABLE_MASK);
+ u32 mask;
+ mask = IXGBE_EIMS_ENABLE_MASK;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
IXGBE_WRITE_FLUSH(&adapter->hw);
}
@@ -898,20 +1328,18 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
**/
static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
{
- int i;
struct ixgbe_hw *hw = &adapter->hw;
- if (adapter->rx_eitr)
- IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
- EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr));
-
- /* for re-triggering the interrupt in non-NAPI mode */
- adapter->rx_ring[0].eims_value = (1 << IXGBE_MSIX_VECTOR(0));
- adapter->tx_ring[0].eims_value = (1 << IXGBE_MSIX_VECTOR(0));
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
+ EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr));
ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(0), 0);
- for (i = 0; i < adapter->num_tx_queues; i++)
- ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i), i);
+ ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(0), 0);
+
+ map_vector_to_rxq(adapter, 0, 0);
+ map_vector_to_txq(adapter, 0, 0);
+
+ DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n");
}
/**
@@ -924,23 +1352,29 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
{
u64 tdba;
struct ixgbe_hw *hw = &adapter->hw;
- u32 i, tdlen;
+ u32 i, j, tdlen, txctrl;
/* Setup the HW Tx Head and Tail descriptor pointers */
for (i = 0; i < adapter->num_tx_queues; i++) {
+ j = adapter->tx_ring[i].reg_idx;
tdba = adapter->tx_ring[i].dma;
tdlen = adapter->tx_ring[i].count *
- sizeof(union ixgbe_adv_tx_desc);
- IXGBE_WRITE_REG(hw, IXGBE_TDBAL(i), (tdba & DMA_32BIT_MASK));
- IXGBE_WRITE_REG(hw, IXGBE_TDBAH(i), (tdba >> 32));
- IXGBE_WRITE_REG(hw, IXGBE_TDLEN(i), tdlen);
- IXGBE_WRITE_REG(hw, IXGBE_TDH(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_TDT(i), 0);
- adapter->tx_ring[i].head = IXGBE_TDH(i);
- adapter->tx_ring[i].tail = IXGBE_TDT(i);
+ sizeof(union ixgbe_adv_tx_desc);
+ IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j),
+ (tdba & DMA_32BIT_MASK));
+ IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32));
+ IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen);
+ IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
+ adapter->tx_ring[i].head = IXGBE_TDH(j);
+ adapter->tx_ring[i].tail = IXGBE_TDT(j);
+ /* Disable Tx Head Writeback RO bit, since this hoses
+ * bookkeeping if things aren't delivered in order.
+ */
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), txctrl);
}
-
- IXGBE_WRITE_REG(hw, IXGBE_TIPG, IXGBE_TIPG_FIBER_DEFAULT);
}
#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
@@ -959,13 +1393,12 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
struct ixgbe_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ int i, j;
u32 rdlen, rxctrl, rxcsum;
u32 random[10];
- u32 reta, mrqc;
- int i;
u32 fctrl, hlreg0;
- u32 srrctl;
u32 pages;
+ u32 reta = 0, mrqc, srrctl;
/* Decide whether to use packet split mode or not */
if (netdev->mtu > ETH_DATA_LEN)
@@ -985,6 +1418,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
fctrl |= IXGBE_FCTRL_BAM;
+ fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
@@ -1036,37 +1470,23 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
adapter->rx_ring[i].tail = IXGBE_RDT(i);
}
- if (adapter->num_rx_queues > 1) {
- /* Random 40bytes used as random key in RSS hash function */
- get_random_bytes(&random[0], 40);
-
- switch (adapter->num_rx_queues) {
- case 8:
- case 4:
- /* Bits [3:0] in each byte refers the Rx queue no */
- reta = 0x00010203;
- break;
- case 2:
- reta = 0x00010001;
- break;
- default:
- reta = 0x00000000;
- break;
- }
-
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
/* Fill out redirection table */
- for (i = 0; i < 32; i++) {
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RETA(0), i, reta);
- if (adapter->num_rx_queues > 4) {
- i++;
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RETA(0), i,
- 0x04050607);
- }
+ for (i = 0, j = 0; i < 128; i++, j++) {
+ if (j == adapter->ring_feature[RING_F_RSS].indices)
+ j = 0;
+ /* reta = 4-byte sliding window of
+ * 0x00..(indices-1)(indices-1)00..etc. */
+ reta = (reta << 8) | (j * 0x11);
+ if ((i & 3) == 3)
+ IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
}
/* Fill out hash function seeds */
+ /* XXX use a random constant here to glue certain flows */
+ get_random_bytes(&random[0], 40);
for (i = 0; i < 10; i++)
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_RSSRK(0), i, random[i]);
+ IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), random[i]);
mrqc = IXGBE_MRQC_RSSEN
/* Perform hash on these packet types */
@@ -1080,26 +1500,23 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
| IXGBE_MRQC_RSS_FIELD_IPV6_UDP
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP;
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+ }
+
+ rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
- /* Multiqueue and packet checksumming are mutually exclusive. */
- rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED ||
+ adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) {
+ /* Disable indicating checksum in descriptor, enables
+ * RSS hash */
rxcsum |= IXGBE_RXCSUM_PCSD;
- IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
- } else {
- /* Enable Receive Checksum Offload for TCP and UDP */
- rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
- if (adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) {
- /* Enable IPv4 payload checksum for UDP fragments
- * Must be used in conjunction with packet-split. */
- rxcsum |= IXGBE_RXCSUM_IPPCSE;
- } else {
- /* don't need to clear IPPCSE as it defaults to 0 */
- }
- IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
}
- /* Enable Receives */
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
- rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (!(rxcsum & IXGBE_RXCSUM_PCSD)) {
+ /* Enable IPv4 payload checksum for UDP fragments
+ * if PCSD is not set */
+ rxcsum |= IXGBE_RXCSUM_IPPCSE;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
}
static void ixgbe_vlan_rx_register(struct net_device *netdev,
@@ -1219,6 +1636,42 @@ static void ixgbe_set_multi(struct net_device *netdev)
}
+static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
+{
+ int q_idx;
+ struct ixgbe_q_vector *q_vector;
+ int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /* legacy and MSI only use one vector */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+ q_vectors = 1;
+
+ for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+ q_vector = &adapter->q_vector[q_idx];
+ if (!q_vector->rxr_count)
+ continue;
+ napi_enable(&q_vector->napi);
+ }
+}
+
+static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
+{
+ int q_idx;
+ struct ixgbe_q_vector *q_vector;
+ int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /* legacy and MSI only use one vector */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+ q_vectors = 1;
+
+ for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+ q_vector = &adapter->q_vector[q_idx];
+ if (!q_vector->rxr_count)
+ continue;
+ napi_disable(&q_vector->napi);
+ }
+}
+
static void ixgbe_configure(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
@@ -1238,30 +1691,35 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int i;
- u32 gpie = 0;
struct ixgbe_hw *hw = &adapter->hw;
- u32 txdctl, rxdctl, mhadd;
+ int i, j = 0;
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ u32 txdctl, rxdctl, mhadd;
+ u32 gpie;
ixgbe_get_hw_control(adapter);
- if (adapter->flags & (IXGBE_FLAG_MSIX_ENABLED |
- IXGBE_FLAG_MSI_ENABLED)) {
+ if ((adapter->flags & IXGBE_FLAG_MSIX_ENABLED) ||
+ (adapter->flags & IXGBE_FLAG_MSI_ENABLED)) {
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
gpie = (IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME |
IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD);
} else {
/* MSI only */
- gpie = (IXGBE_GPIE_EIAME |
- IXGBE_GPIE_PBA_SUPPORT);
+ gpie = 0;
}
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_GPIE, gpie);
- gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
+ /* XXX: to interrupt immediately for EICS writes, enable this */
+ /* gpie |= IXGBE_GPIE_EIMEN; */
+ IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
}
- mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+ /* legacy interrupts, use EIAM to auto-mask when reading EICR,
+ * specifically only auto mask tx and rx interrupts */
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+ }
+ mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
mhadd &= ~IXGBE_MHADD_MFS_MASK;
mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT;
@@ -1270,15 +1728,21 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
}
for (i = 0; i < adapter->num_tx_queues; i++) {
- txdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(i));
+ j = adapter->tx_ring[i].reg_idx;
+ txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
txdctl |= IXGBE_TXDCTL_ENABLE;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(i), txdctl);
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
}
for (i = 0; i < adapter->num_rx_queues; i++) {
- rxdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(i));
+ j = adapter->rx_ring[i].reg_idx;
+ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
+ /* enable PTHRESH=32 descriptors (half the internal cache)
+ * and HTHRESH=0 descriptors (to minimize latency on fetch),
+ * this also removes a pesky rx_no_buffer_count increment */
+ rxdctl |= 0x0020;
rxdctl |= IXGBE_RXDCTL_ENABLE;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(i), rxdctl);
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), rxdctl);
}
/* enable all receives */
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
@@ -1291,7 +1755,11 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
ixgbe_configure_msi_and_legacy(adapter);
clear_bit(__IXGBE_DOWN, &adapter->state);
- napi_enable(&adapter->napi);
+ ixgbe_napi_enable_all(adapter);
+
+ /* clear any pending interrupts, may auto mask */
+ IXGBE_READ_REG(hw, IXGBE_EICR);
+
ixgbe_irq_enable(adapter);
/* bring the link up in the watchdog, this could race with our first
@@ -1333,7 +1801,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- u32 err, num_rx_queues = adapter->num_rx_queues;
+ u32 err;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
@@ -1349,7 +1817,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3cold, 0);
if (netif_running(netdev)) {
- err = ixgbe_request_irq(adapter, &num_rx_queues);
+ err = ixgbe_request_irq(adapter);
if (err)
return err;
}
@@ -1449,27 +1917,27 @@ static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter,
}
/**
- * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues
+ * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues
* @adapter: board private structure
**/
-static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
+static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
{
int i;
- for (i = 0; i < adapter->num_tx_queues; i++)
- ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
}
/**
- * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues
+ * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues
* @adapter: board private structure
**/
-static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
+static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
{
int i;
- for (i = 0; i < adapter->num_rx_queues; i++)
- ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]);
}
void ixgbe_down(struct ixgbe_adapter *adapter)
@@ -1493,10 +1961,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
IXGBE_WRITE_FLUSH(&adapter->hw);
msleep(10);
- napi_disable(&adapter->napi);
-
ixgbe_irq_disable(adapter);
+ ixgbe_napi_disable_all(adapter);
del_timer_sync(&adapter->watchdog_timer);
netif_carrier_off(netdev);
@@ -1547,27 +2014,37 @@ static void ixgbe_shutdown(struct pci_dev *pdev)
}
/**
- * ixgbe_clean - NAPI Rx polling callback
- * @adapter: board private structure
+ * ixgbe_poll - NAPI Rx polling callback
+ * @napi: structure for representing this polling device
+ * @budget: how many packets driver is allowed to clean
+ *
+ * This function is used for legacy and MSI, NAPI mode
**/
-static int ixgbe_clean(struct napi_struct *napi, int budget)
+static int ixgbe_poll(struct napi_struct *napi, int budget)
{
- struct ixgbe_adapter *adapter = container_of(napi,
- struct ixgbe_adapter, napi);
- struct net_device *netdev = adapter->netdev;
+ struct ixgbe_q_vector *q_vector = container_of(napi,
+ struct ixgbe_q_vector, napi);
+ struct ixgbe_adapter *adapter = q_vector->adapter;
int tx_cleaned = 0, work_done = 0;
- /* In non-MSIX case, there is no multi-Tx/Rx queue */
+#ifdef CONFIG_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+ ixgbe_update_tx_dca(adapter, adapter->tx_ring);
+ ixgbe_update_rx_dca(adapter, adapter->rx_ring);
+ }
+#endif
+
tx_cleaned = ixgbe_clean_tx_irq(adapter, adapter->tx_ring);
- ixgbe_clean_rx_irq(adapter, &adapter->rx_ring[0], &work_done,
- budget);
+ ixgbe_clean_rx_irq(adapter, adapter->rx_ring, &work_done, budget);
if (tx_cleaned)
work_done = budget;
/* If budget not fully consumed, exit the polling mode */
if (work_done < budget) {
- netif_rx_complete(netdev, napi);
+ netif_rx_complete(adapter->netdev, napi);
+ if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS)
+ ixgbe_set_itr(adapter);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable(adapter);
}
@@ -1597,6 +2074,136 @@ static void ixgbe_reset_task(struct work_struct *work)
ixgbe_reinit_locked(adapter);
}
+static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
+ int vectors)
+{
+ int err, vector_threshold;
+
+ /* We'll want at least 3 (vector_threshold):
+ * 1) TxQ[0] Cleanup
+ * 2) RxQ[0] Cleanup
+ * 3) Other (Link Status Change, etc.)
+ * 4) TCP Timer (optional)
+ */
+ vector_threshold = MIN_MSIX_COUNT;
+
+ /* The more we get, the more we will assign to Tx/Rx Cleanup
+ * for the separate queues...where Rx Cleanup >= Tx Cleanup.
+ * Right now, we simply care about how many we'll get; we'll
+ * set them up later while requesting irq's.
+ */
+ while (vectors >= vector_threshold) {
+ err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+ vectors);
+ if (!err) /* Success in acquiring all requested vectors. */
+ break;
+ else if (err < 0)
+ vectors = 0; /* Nasty failure, quit now */
+ else /* err == number of vectors we should try again with */
+ vectors = err;
+ }
+
+ if (vectors < vector_threshold) {
+ /* Can't allocate enough MSI-X interrupts? Oh well.
+ * This just means we'll go with either a single MSI
+ * vector or fall back to legacy interrupts.
+ */
+ DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n");
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+ } else {
+ adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
+ adapter->num_msix_vectors = vectors;
+ }
+}
+
+static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
+{
+ int nrq, ntq;
+ int feature_mask = 0, rss_i, rss_m;
+
+ /* Number of supported queues */
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ rss_i = adapter->ring_feature[RING_F_RSS].indices;
+ rss_m = 0;
+ feature_mask |= IXGBE_FLAG_RSS_ENABLED;
+
+ switch (adapter->flags & feature_mask) {
+ case (IXGBE_FLAG_RSS_ENABLED):
+ rss_m = 0xF;
+ nrq = rss_i;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ ntq = rss_i;
+#else
+ ntq = 1;
+#endif
+ break;
+ case 0:
+ default:
+ rss_i = 0;
+ rss_m = 0;
+ nrq = 1;
+ ntq = 1;
+ break;
+ }
+
+ adapter->ring_feature[RING_F_RSS].indices = rss_i;
+ adapter->ring_feature[RING_F_RSS].mask = rss_m;
+ break;
+ default:
+ nrq = 1;
+ ntq = 1;
+ break;
+ }
+
+ adapter->num_rx_queues = nrq;
+ adapter->num_tx_queues = ntq;
+}
+
+/**
+ * ixgbe_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ **/
+static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+{
+ /* TODO: Remove all uses of the indices in the cases where multiple
+ * features are OR'd together, if the feature set makes sense.
+ */
+ int feature_mask = 0, rss_i;
+ int i, txr_idx, rxr_idx;
+
+ /* Number of supported queues */
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ rss_i = adapter->ring_feature[RING_F_RSS].indices;
+ txr_idx = 0;
+ rxr_idx = 0;
+ feature_mask |= IXGBE_FLAG_RSS_ENABLED;
+ switch (adapter->flags & feature_mask) {
+ case (IXGBE_FLAG_RSS_ENABLED):
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].reg_idx = i;
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].reg_idx = i;
+ break;
+ case 0:
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
/**
* ixgbe_alloc_queues - Allocate memory for all rings
* @adapter: board private structure to initialize
@@ -1612,25 +2219,167 @@ static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
adapter->tx_ring = kcalloc(adapter->num_tx_queues,
sizeof(struct ixgbe_ring), GFP_KERNEL);
if (!adapter->tx_ring)
- return -ENOMEM;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i].count = IXGBE_DEFAULT_TXD;
+ goto err_tx_ring_allocation;
adapter->rx_ring = kcalloc(adapter->num_rx_queues,
sizeof(struct ixgbe_ring), GFP_KERNEL);
- if (!adapter->rx_ring) {
- kfree(adapter->tx_ring);
- return -ENOMEM;
- }
+ if (!adapter->rx_ring)
+ goto err_rx_ring_allocation;
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ adapter->tx_ring[i].count = IXGBE_DEFAULT_TXD;
+ adapter->tx_ring[i].queue_index = i;
+ }
for (i = 0; i < adapter->num_rx_queues; i++) {
- adapter->rx_ring[i].adapter = adapter;
- adapter->rx_ring[i].itr_register = IXGBE_EITR(i);
adapter->rx_ring[i].count = IXGBE_DEFAULT_RXD;
+ adapter->rx_ring[i].queue_index = i;
+ }
+
+ ixgbe_cache_ring_register(adapter);
+
+ return 0;
+
+err_rx_ring_allocation:
+ kfree(adapter->tx_ring);
+err_tx_ring_allocation:
+ return -ENOMEM;
+}
+
+/**
+ * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
+ *adapter)
+{
+ int err = 0;
+ int vector, v_budget;
+
+ /*
+ * It's easy to be greedy for MSI-X vectors, but it really
+ * doesn't do us much good if we have a lot more vectors
+ * than CPU's. So let's be conservative and only ask for
+ * (roughly) twice the number of vectors as there are CPU's.
+ */
+ v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
+ (int)(num_online_cpus() * 2)) + NON_Q_VECTORS;
+
+ /*
+ * At the same time, hardware can only support a maximum of
+ * MAX_MSIX_COUNT vectors. With features such as RSS and VMDq,
+ * we can easily reach upwards of 64 Rx descriptor queues and
+ * 32 Tx queues. Thus, we cap it off in those rare cases where
+ * the cpu count also exceeds our vector limit.
+ */
+ v_budget = min(v_budget, MAX_MSIX_COUNT);
+
+ /* A failure in MSI-X entry allocation isn't fatal, but it does
+ * mean we disable MSI-X capabilities of the adapter. */
+ adapter->msix_entries = kcalloc(v_budget,
+ sizeof(struct msix_entry), GFP_KERNEL);
+ if (!adapter->msix_entries) {
+ adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+ ixgbe_set_num_queues(adapter);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+ err = ixgbe_alloc_queues(adapter);
+ if (err) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory "
+ "for queues\n");
+ goto out;
+ }
+
+ goto try_msi;
+ }
+
+ for (vector = 0; vector < v_budget; vector++)
+ adapter->msix_entries[vector].entry = vector;
+
+ ixgbe_acquire_msix_vectors(adapter, v_budget);
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+ goto out;
+
+try_msi:
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
+ } else {
+ DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, "
+ "falling back to legacy. Error: %d\n", err);
+ /* reset err */
+ err = 0;
+ }
+
+out:
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ /* Notify the stack of the (possibly) reduced Tx Queue count. */
+ adapter->netdev->egress_subqueue_count = adapter->num_tx_queues;
+#endif
+
+ return err;
+}
+
+static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
+{
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+ adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
+ pci_disable_msi(adapter->pdev);
}
+ return;
+}
+
+/**
+ * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme
+ * @adapter: board private structure to initialize
+ *
+ * We determine which interrupt scheme to use based on...
+ * - Kernel support (MSI, MSI-X)
+ * - which can be user-defined (via MODULE_PARAM)
+ * - Hardware queue count (num_*_queues)
+ * - defined by miscellaneous hardware support/features (RSS, etc.)
+ **/
+static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
+ int err;
+
+ /* Number of supported queues */
+ ixgbe_set_num_queues(adapter);
+
+ err = ixgbe_alloc_queues(adapter);
+ if (err) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ goto err_alloc_queues;
+ }
+
+ err = ixgbe_set_interrupt_capability(adapter);
+ if (err) {
+ DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
+ goto err_set_interrupt;
+ }
+
+ DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
+ "Tx Queue count = %u\n",
+ (adapter->num_rx_queues > 1) ? "Enabled" :
+ "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+
+ set_bit(__IXGBE_DOWN, &adapter->state);
return 0;
+
+err_set_interrupt:
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_alloc_queues:
+ return err;
}
/**
@@ -1645,11 +2394,22 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
+ unsigned int rss;
+
+ /* Set capability flags */
+ rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus());
+ adapter->ring_feature[RING_F_RSS].indices = rss;
+ adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+
+ /* Enable Dynamic interrupt throttling by default */
+ adapter->rx_eitr = 1;
+ adapter->tx_eitr = 1;
/* default flow control settings */
hw->fc.original_type = ixgbe_fc_full;
hw->fc.type = ixgbe_fc_full;
+ /* select 10G link by default */
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
if (hw->mac.ops.reset(hw)) {
dev_err(&pdev->dev, "HW Init failed\n");
@@ -1667,16 +2427,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
return -EIO;
}
- /* Set the default values */
- adapter->num_rx_queues = IXGBE_DEFAULT_RXQ;
- adapter->num_tx_queues = 1;
+ /* enable rx csum by default */
adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
- if (ixgbe_alloc_queues(adapter)) {
- dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
- return -ENOMEM;
- }
-
set_bit(__IXGBE_DOWN, &adapter->state);
return 0;
@@ -1716,7 +2469,6 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
return -ENOMEM;
}
- txdr->adapter = adapter;
txdr->next_to_use = 0;
txdr->next_to_clean = 0;
txdr->work_limit = txdr->count;
@@ -1735,7 +2487,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
struct ixgbe_ring *rxdr)
{
struct pci_dev *pdev = adapter->pdev;
- int size, desc_len;
+ int size;
size = sizeof(struct ixgbe_rx_buffer) * rxdr->count;
rxdr->rx_buffer_info = vmalloc(size);
@@ -1746,10 +2498,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
}
memset(rxdr->rx_buffer_info, 0, size);
- desc_len = sizeof(union ixgbe_adv_rx_desc);
-
/* Round up to nearest 4K */
- rxdr->size = rxdr->count * desc_len;
+ rxdr->size = rxdr->count * sizeof(union ixgbe_adv_rx_desc);
rxdr->size = ALIGN(rxdr->size, 4096);
rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
@@ -1763,7 +2513,6 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
- rxdr->adapter = adapter;
return 0;
}
@@ -1841,8 +2590,7 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
}
/**
- * ixgbe_setup_all_tx_resources - wrapper to allocate Tx resources
- * (Descriptors) for all queues
+ * ixgbe_setup_all_tx_resources - allocate all queues Tx resources
* @adapter: board private structure
*
* If this function returns with an error, then it's possible one or
@@ -1868,8 +2616,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
}
/**
- * ixgbe_setup_all_rx_resources - wrapper to allocate Rx resources
- * (Descriptors) for all queues
+ * ixgbe_setup_all_rx_resources - allocate all queues Rx resources
* @adapter: board private structure
*
* If this function returns with an error, then it's possible one or
@@ -1911,6 +2658,9 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
(max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
return -EINVAL;
+ DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ /* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
if (netif_running(netdev))
@@ -1935,23 +2685,16 @@ static int ixgbe_open(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int err;
- u32 num_rx_queues = adapter->num_rx_queues;
/* disallow open during test */
if (test_bit(__IXGBE_TESTING, &adapter->state))
return -EBUSY;
-try_intr_reinit:
/* allocate transmit descriptors */
err = ixgbe_setup_all_tx_resources(adapter);
if (err)
goto err_setup_tx;
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
- num_rx_queues = 1;
- adapter->num_rx_queues = num_rx_queues;
- }
-
/* allocate receive descriptors */
err = ixgbe_setup_all_rx_resources(adapter);
if (err)
@@ -1959,31 +2702,10 @@ try_intr_reinit:
ixgbe_configure(adapter);
- err = ixgbe_request_irq(adapter, &num_rx_queues);
+ err = ixgbe_request_irq(adapter);
if (err)
goto err_req_irq;
- /* ixgbe_request might have reduced num_rx_queues */
- if (num_rx_queues < adapter->num_rx_queues) {
- /* We didn't get MSI-X, so we need to release everything,
- * set our Rx queue count to num_rx_queues, and redo the
- * whole init process.
- */
- ixgbe_free_irq(adapter);
- if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
- pci_disable_msi(adapter->pdev);
- adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
- }
- ixgbe_free_all_rx_resources(adapter);
- ixgbe_free_all_tx_resources(adapter);
- adapter->num_rx_queues = num_rx_queues;
-
- /* Reset the hardware, and start over. */
- ixgbe_reset(adapter);
-
- goto try_intr_reinit;
- }
-
err = ixgbe_up_complete(adapter);
if (err)
goto err_up;
@@ -2119,6 +2841,9 @@ static void ixgbe_watchdog(unsigned long data)
struct net_device *netdev = adapter->netdev;
bool link_up;
u32 link_speed = 0;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ int i;
+#endif
adapter->hw.mac.ops.check_link(&adapter->hw, &(link_speed), &link_up);
@@ -2140,6 +2865,10 @@ static void ixgbe_watchdog(unsigned long data)
netif_carrier_on(netdev);
netif_wake_queue(netdev);
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_wake_subqueue(netdev, i);
+#endif
} else {
/* Force detection of hung controller */
adapter->detect_tx_hung = true;
@@ -2154,10 +2883,23 @@ static void ixgbe_watchdog(unsigned long data)
ixgbe_update_stats(adapter);
- /* Reset the timer */
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ /* Cause software interrupt to ensure rx rings are cleaned */
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ u32 eics =
+ (1 << (adapter->num_msix_vectors - NON_Q_VECTORS)) - 1;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, eics);
+ } else {
+ /* for legacy and MSI interrupts don't set any bits that
+ * are enabled for EIAM, because this operation would
+ * set *both* EIMS and EICS for any bit in EIAM */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+ (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
+ }
+ /* Reset the timer */
mod_timer(&adapter->watchdog_timer,
round_jiffies(jiffies + 2 * HZ));
+ }
}
static int ixgbe_tso(struct ixgbe_adapter *adapter,
@@ -2170,7 +2912,6 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
struct ixgbe_tx_buffer *tx_buffer_info;
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
u32 mss_l4len_idx = 0, l4len;
- *hdr_len = 0;
if (skb_is_gso(skb)) {
if (skb_header_cloned(skb)) {
@@ -2454,7 +3195,11 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+#else
netif_stop_queue(netdev);
+#endif
/* Herbert's original patch had:
* smp_mb__after_netif_stop_queue();
* but since that doesn't exist yet, just open code it. */
@@ -2466,7 +3211,11 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
return -EBUSY;
/* A reprieve! - use start_queue because it doesn't call schedule */
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+#else
netif_wake_queue(netdev);
+#endif
++adapter->restart_queue;
return 0;
}
@@ -2487,15 +3236,18 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int len = skb->len;
unsigned int first;
unsigned int tx_flags = 0;
- u8 hdr_len;
- int tso;
+ u8 hdr_len = 0;
+ int r_idx = 0, tso;
unsigned int mss = 0;
int count = 0;
unsigned int f;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
len -= skb->data_len;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping;
+#endif
+ tx_ring = &adapter->tx_ring[r_idx];
- tx_ring = adapter->tx_ring;
if (skb->len <= 0) {
dev_kfree_skb(skb);
@@ -2603,6 +3355,31 @@ static void ixgbe_netpoll(struct net_device *netdev)
}
#endif
+/**
+ * ixgbe_napi_add_all - prep napi structs for use
+ * @adapter: private struct
+ * helper function to napi_add each possible q_vector->napi
+ */
+static void ixgbe_napi_add_all(struct ixgbe_adapter *adapter)
+{
+ int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ int (*poll)(struct napi_struct *, int);
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ poll = &ixgbe_clean_rxonly;
+ } else {
+ poll = &ixgbe_poll;
+ /* only one q_vector for legacy modes */
+ q_vectors = 1;
+ }
+
+ for (i = 0; i < q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
+ netif_napi_add(adapter->netdev, &q_vector->napi,
+ (*poll), 64);
+ }
+}
+
/**
* ixgbe_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2655,7 +3432,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
pci_set_master(pdev);
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
+#else
netdev = alloc_etherdev(sizeof(struct ixgbe_adapter));
+#endif
if (!netdev) {
err = -ENOMEM;
goto err_alloc_etherdev;
@@ -2696,7 +3477,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
ixgbe_set_ethtool_ops(netdev);
netdev->tx_timeout = &ixgbe_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, ixgbe_clean, 64);
netdev->vlan_rx_register = ixgbe_vlan_rx_register;
netdev->vlan_rx_add_vid = ixgbe_vlan_rx_add_vid;
netdev->vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid;
@@ -2719,6 +3499,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
/* Setup hw api */
memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
+ hw->mac.type = ii->mac;
err = ii->get_invariants(hw);
if (err)
@@ -2741,6 +3522,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ netdev->features |= NETIF_F_MULTI_QUEUE;
+#endif
/* make sure the EEPROM is good */
if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) {
@@ -2770,9 +3554,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
- /* Interrupt Throttle Rate */
- adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS);
- adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS);
+ err = ixgbe_init_interrupt_scheme(adapter);
+ if (err)
+ goto err_sw_init;
/* print bus type/speed/width info */
pci_read_config_word(pdev, IXGBE_PCI_LINK_STATUS, &link_status);
@@ -2808,12 +3592,27 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netif_carrier_off(netdev);
netif_stop_queue(netdev);
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_stop_subqueue(netdev, i);
+#endif
+
+ ixgbe_napi_add_all(adapter);
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err)
goto err_register;
+#ifdef CONFIG_DCA
+ if (dca_add_requester(&pdev->dev) == 0) {
+ adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
+ /* always use CB2 mode, difference is masked
+ * in the CB driver */
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2);
+ ixgbe_setup_dca(adapter);
+ }
+#endif
dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
cards_found++;
@@ -2823,6 +3622,7 @@ err_register:
ixgbe_release_hw_control(adapter);
err_hw_init:
err_sw_init:
+ ixgbe_reset_interrupt_capability(adapter);
err_eeprom:
iounmap(hw->hw_addr);
err_ioremap:
@@ -2854,16 +3654,27 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
flush_scheduled_work();
+#ifdef CONFIG_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+ adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
+ dca_remove_requester(&pdev->dev);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
+ }
+
+#endif
unregister_netdev(netdev);
- ixgbe_release_hw_control(adapter);
+ ixgbe_reset_interrupt_capability(adapter);
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
+ ixgbe_release_hw_control(adapter);
iounmap(adapter->hw.hw_addr);
pci_release_regions(pdev);
+ DPRINTK(PROBE, INFO, "complete\n");
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
free_netdev(netdev);
pci_disable_device(pdev);
@@ -2975,6 +3786,10 @@ static int __init ixgbe_init_module(void)
printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
+#ifdef CONFIG_DCA
+ dca_register_notify(&dca_notifier);
+
+#endif
ret = pci_register_driver(&ixgbe_driver);
return ret;
}
@@ -2988,8 +3803,25 @@ module_init(ixgbe_init_module);
**/
static void __exit ixgbe_exit_module(void)
{
+#ifdef CONFIG_DCA
+ dca_unregister_notify(&dca_notifier);
+#endif
pci_unregister_driver(&ixgbe_driver);
}
+
+#ifdef CONFIG_DCA
+static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
+ void *p)
+{
+ int ret_val;
+
+ ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event,
+ __ixgbe_notify_dca);
+
+ return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+#endif /* CONFIG_DCA */
+
module_exit(ixgbe_exit_module);
/* ixgbe_main.c */
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
new file mode 100644
index 0000000000000000000000000000000000000000..1d24a73a0e1a1d268c1d319bcd3625a63d5d47da
--- /dev/null
+++ b/drivers/net/korina.c
@@ -0,0 +1,1233 @@
+/*
+ * Driver for the IDT RC32434 (Korina) on-chip ethernet controller.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ * Copyright 2006 Felix Fietkau
+ * Copyright 2008 Florian Fainelli
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Writing to a DMA status register:
+ *
+ * When writing to the status register, you should mask the bit you have
+ * been testing the status register with. Both Tx and Rx DMA registers
+ * should stick to this procedure.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+
+#define DRV_NAME "korina"
+#define DRV_VERSION "0.10"
+#define DRV_RELDATE "04Mar2008"
+
+#define STATION_ADDRESS_HIGH(dev) (((dev)->dev_addr[0] << 8) | \
+ ((dev)->dev_addr[1]))
+#define STATION_ADDRESS_LOW(dev) (((dev)->dev_addr[2] << 24) | \
+ ((dev)->dev_addr[3] << 16) | \
+ ((dev)->dev_addr[4] << 8) | \
+ ((dev)->dev_addr[5]))
+
+#define MII_CLOCK 1250000 /* no more than 2.5MHz */
+
+/* the following must be powers of two */
+#define KORINA_NUM_RDS 64 /* number of receive descriptors */
+#define KORINA_NUM_TDS 64 /* number of transmit descriptors */
+
+#define KORINA_RBSIZE 536 /* size of one resource buffer = Ether MTU */
+#define KORINA_RDS_MASK (KORINA_NUM_RDS - 1)
+#define KORINA_TDS_MASK (KORINA_NUM_TDS - 1)
+#define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc))
+#define TD_RING_SIZE (KORINA_NUM_TDS * sizeof(struct dma_desc))
+
+#define TX_TIMEOUT (6000 * HZ / 1000)
+
+enum chain_status { desc_filled, desc_empty };
+#define IS_DMA_FINISHED(X) (((X) & (DMA_DESC_FINI)) != 0)
+#define IS_DMA_DONE(X) (((X) & (DMA_DESC_DONE)) != 0)
+#define RCVPKT_LENGTH(X) (((X) & ETH_RX_LEN) >> ETH_RX_LEN_BIT)
+
+/* Information that need to be kept for each board. */
+struct korina_private {
+ struct eth_regs *eth_regs;
+ struct dma_reg *rx_dma_regs;
+ struct dma_reg *tx_dma_regs;
+ struct dma_desc *td_ring; /* transmit descriptor ring */
+ struct dma_desc *rd_ring; /* receive descriptor ring */
+
+ struct sk_buff *tx_skb[KORINA_NUM_TDS];
+ struct sk_buff *rx_skb[KORINA_NUM_RDS];
+
+ int rx_next_done;
+ int rx_chain_head;
+ int rx_chain_tail;
+ enum chain_status rx_chain_status;
+
+ int tx_next_done;
+ int tx_chain_head;
+ int tx_chain_tail;
+ enum chain_status tx_chain_status;
+ int tx_count;
+ int tx_full;
+
+ int rx_irq;
+ int tx_irq;
+ int ovr_irq;
+ int und_irq;
+
+ spinlock_t lock; /* NIC xmit lock */
+
+ int dma_halt_cnt;
+ int dma_run_cnt;
+ struct napi_struct napi;
+ struct mii_if_info mii_if;
+ struct net_device *dev;
+ int phy_addr;
+};
+
+extern unsigned int idt_cpu_freq;
+
+static inline void korina_start_dma(struct dma_reg *ch, u32 dma_addr)
+{
+ writel(0, &ch->dmandptr);
+ writel(dma_addr, &ch->dmadptr);
+}
+
+static inline void korina_abort_dma(struct net_device *dev,
+ struct dma_reg *ch)
+{
+ if (readl(&ch->dmac) & DMA_CHAN_RUN_BIT) {
+ writel(0x10, &ch->dmac);
+
+ while (!(readl(&ch->dmas) & DMA_STAT_HALT))
+ dev->trans_start = jiffies;
+
+ writel(0, &ch->dmas);
+ }
+
+ writel(0, &ch->dmadptr);
+ writel(0, &ch->dmandptr);
+}
+
+static inline void korina_chain_dma(struct dma_reg *ch, u32 dma_addr)
+{
+ writel(dma_addr, &ch->dmandptr);
+}
+
+static void korina_abort_tx(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ korina_abort_dma(dev, lp->tx_dma_regs);
+}
+
+static void korina_abort_rx(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ korina_abort_dma(dev, lp->rx_dma_regs);
+}
+
+static void korina_start_rx(struct korina_private *lp,
+ struct dma_desc *rd)
+{
+ korina_start_dma(lp->rx_dma_regs, CPHYSADDR(rd));
+}
+
+static void korina_chain_rx(struct korina_private *lp,
+ struct dma_desc *rd)
+{
+ korina_chain_dma(lp->rx_dma_regs, CPHYSADDR(rd));
+}
+
+/* transmit packet */
+static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ unsigned long flags;
+ u32 length;
+ u32 chain_index;
+ struct dma_desc *td;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ td = &lp->td_ring[lp->tx_chain_tail];
+
+ /* stop queue when full, drop pkts if queue already full */
+ if (lp->tx_count >= (KORINA_NUM_TDS - 2)) {
+ lp->tx_full = 1;
+
+ if (lp->tx_count == (KORINA_NUM_TDS - 2))
+ netif_stop_queue(dev);
+ else {
+ dev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ lp->tx_count++;
+
+ lp->tx_skb[lp->tx_chain_tail] = skb;
+
+ length = skb->len;
+ dma_cache_wback((u32)skb->data, skb->len);
+
+ /* Setup the transmit descriptor. */
+ dma_cache_inv((u32) td, sizeof(*td));
+ td->ca = CPHYSADDR(skb->data);
+ chain_index = (lp->tx_chain_tail - 1) &
+ KORINA_TDS_MASK;
+
+ if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
+ if (lp->tx_chain_status == desc_empty) {
+ /* Update tail */
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ /* Move tail */
+ lp->tx_chain_tail = chain_index;
+ /* Write to NDPTR */
+ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ &lp->tx_dma_regs->dmandptr);
+ /* Move head to tail */
+ lp->tx_chain_head = lp->tx_chain_tail;
+ } else {
+ /* Update tail */
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ /* Link to prev */
+ lp->td_ring[chain_index].control &=
+ ~DMA_DESC_COF;
+ /* Link to prev */
+ lp->td_ring[chain_index].link = CPHYSADDR(td);
+ /* Move tail */
+ lp->tx_chain_tail = chain_index;
+ /* Write to NDPTR */
+ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ &(lp->tx_dma_regs->dmandptr));
+ /* Move head to tail */
+ lp->tx_chain_head = lp->tx_chain_tail;
+ lp->tx_chain_status = desc_empty;
+ }
+ } else {
+ if (lp->tx_chain_status == desc_empty) {
+ /* Update tail */
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ /* Move tail */
+ lp->tx_chain_tail = chain_index;
+ lp->tx_chain_status = desc_filled;
+ netif_stop_queue(dev);
+ } else {
+ /* Update tail */
+ td->control = DMA_COUNT(length) |
+ DMA_DESC_COF | DMA_DESC_IOF;
+ lp->td_ring[chain_index].control &=
+ ~DMA_DESC_COF;
+ lp->td_ring[chain_index].link = CPHYSADDR(td);
+ lp->tx_chain_tail = chain_index;
+ }
+ }
+ dma_cache_wback((u32) td, sizeof(*td));
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static int mdio_read(struct net_device *dev, int mii_id, int reg)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int ret;
+
+ mii_id = ((lp->rx_irq == 0x2c ? 1 : 0) << 8);
+
+ writel(0, &lp->eth_regs->miimcfg);
+ writel(0, &lp->eth_regs->miimcmd);
+ writel(mii_id | reg, &lp->eth_regs->miimaddr);
+ writel(ETH_MII_CMD_SCN, &lp->eth_regs->miimcmd);
+
+ ret = (int)(readl(&lp->eth_regs->miimrdd));
+ return ret;
+}
+
+static void mdio_write(struct net_device *dev, int mii_id, int reg, int val)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ mii_id = ((lp->rx_irq == 0x2c ? 1 : 0) << 8);
+
+ writel(0, &lp->eth_regs->miimcfg);
+ writel(1, &lp->eth_regs->miimcmd);
+ writel(mii_id | reg, &lp->eth_regs->miimaddr);
+ writel(ETH_MII_CMD_SCN, &lp->eth_regs->miimcmd);
+ writel(val, &lp->eth_regs->miimwtd);
+}
+
+/* Ethernet Rx DMA interrupt */
+static irqreturn_t korina_rx_dma_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct korina_private *lp = netdev_priv(dev);
+ u32 dmas, dmasm;
+ irqreturn_t retval;
+
+ dmas = readl(&lp->rx_dma_regs->dmas);
+ if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
+ netif_rx_schedule_prep(dev, &lp->napi);
+
+ dmasm = readl(&lp->rx_dma_regs->dmasm);
+ writel(dmasm | (DMA_STAT_DONE |
+ DMA_STAT_HALT | DMA_STAT_ERR),
+ &lp->rx_dma_regs->dmasm);
+
+ if (dmas & DMA_STAT_ERR)
+ printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+
+ retval = IRQ_HANDLED;
+ } else
+ retval = IRQ_NONE;
+
+ return retval;
+}
+
+static int korina_rx(struct net_device *dev, int limit)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
+ struct sk_buff *skb, *skb_new;
+ u8 *pkt_buf;
+ u32 devcs, pkt_len, dmas, rx_free_desc;
+ int count;
+
+ dma_cache_inv((u32)rd, sizeof(*rd));
+
+ for (count = 0; count < limit; count++) {
+
+ devcs = rd->devcs;
+
+ /* Update statistics counters */
+ if (devcs & ETH_RX_CRC)
+ dev->stats.rx_crc_errors++;
+ if (devcs & ETH_RX_LOR)
+ dev->stats.rx_length_errors++;
+ if (devcs & ETH_RX_LE)
+ dev->stats.rx_length_errors++;
+ if (devcs & ETH_RX_OVR)
+ dev->stats.rx_over_errors++;
+ if (devcs & ETH_RX_CV)
+ dev->stats.rx_frame_errors++;
+ if (devcs & ETH_RX_CES)
+ dev->stats.rx_length_errors++;
+ if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
+
+ if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
+ /* check that this is a whole packet
+ * WARNING: DMA_FD bit incorrectly set
+ * in Rc32434 (errata ref #077) */
+ dev->stats.rx_errors++;
+ dev->stats.rx_dropped++;
+ }
+
+ while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
+ /* init the var. used for the later
+ * operations within the while loop */
+ skb_new = NULL;
+ pkt_len = RCVPKT_LENGTH(devcs);
+ skb = lp->rx_skb[lp->rx_next_done];
+
+ if ((devcs & ETH_RX_ROK)) {
+ /* must be the (first and) last
+ * descriptor then */
+ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+
+ /* invalidate the cache */
+ dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+
+ /* Malloc up new buffer. */
+ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+
+ if (!skb_new)
+ break;
+ /* Do not count the CRC */
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Pass the packet to upper layers */
+ netif_receive_skb(skb);
+ dev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+
+ /* Update the mcast stats */
+ if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
+
+ lp->rx_skb[lp->rx_next_done] = skb_new;
+ }
+
+ rd->devcs = 0;
+
+ /* Restore descriptor's curr_addr */
+ if (skb_new)
+ rd->ca = CPHYSADDR(skb_new->data);
+ else
+ rd->ca = CPHYSADDR(skb->data);
+
+ rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ DMA_DESC_COD | DMA_DESC_IOD;
+ lp->rd_ring[(lp->rx_next_done - 1) &
+ KORINA_RDS_MASK].control &=
+ ~DMA_DESC_COD;
+
+ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+ dma_cache_wback((u32)rd, sizeof(*rd));
+ rd = &lp->rd_ring[lp->rx_next_done];
+ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+ }
+ }
+
+ dmas = readl(&lp->rx_dma_regs->dmas);
+
+ if (dmas & DMA_STAT_HALT) {
+ writel(~(DMA_STAT_HALT | DMA_STAT_ERR),
+ &lp->rx_dma_regs->dmas);
+
+ lp->dma_halt_cnt++;
+ rd->devcs = 0;
+ skb = lp->rx_skb[lp->rx_next_done];
+ rd->ca = CPHYSADDR(skb->data);
+ dma_cache_wback((u32)rd, sizeof(*rd));
+ korina_chain_rx(lp, rd);
+ }
+
+ return count;
+}
+
+static int korina_poll(struct napi_struct *napi, int budget)
+{
+ struct korina_private *lp =
+ container_of(napi, struct korina_private, napi);
+ struct net_device *dev = lp->dev;
+ int work_done;
+
+ work_done = korina_rx(dev, budget);
+ if (work_done < budget) {
+ netif_rx_complete(dev, napi);
+
+ writel(readl(&lp->rx_dma_regs->dmasm) &
+ ~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
+ &lp->rx_dma_regs->dmasm);
+ }
+ return work_done;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void korina_multicast_list(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ unsigned long flags;
+ struct dev_mc_list *dmi = dev->mc_list;
+ u32 recognise = ETH_ARC_AB; /* always accept broadcasts */
+ int i;
+
+ /* Set promiscuous mode */
+ if (dev->flags & IFF_PROMISC)
+ recognise |= ETH_ARC_PRO;
+
+ else if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 4))
+ /* All multicast and broadcast */
+ recognise |= ETH_ARC_AM;
+
+ /* Build the hash table */
+ if (dev->mc_count > 4) {
+ u16 hash_table[4];
+ u32 crc;
+
+ for (i = 0; i < 4; i++)
+ hash_table[i] = 0;
+
+ for (i = 0; i < dev->mc_count; i++) {
+ char *addrs = dmi->dmi_addr;
+
+ dmi = dmi->next;
+
+ if (!(*addrs & 1))
+ continue;
+
+ crc = ether_crc_le(6, addrs);
+ crc >>= 26;
+ hash_table[crc >> 4] |= 1 << (15 - (crc & 0xf));
+ }
+ /* Accept filtered multicast */
+ recognise |= ETH_ARC_AFM;
+
+ /* Fill the MAC hash tables with their values */
+ writel((u32)(hash_table[1] << 16 | hash_table[0]),
+ &lp->eth_regs->ethhash0);
+ writel((u32)(hash_table[3] << 16 | hash_table[2]),
+ &lp->eth_regs->ethhash1);
+ }
+
+ spin_lock_irqsave(&lp->lock, flags);
+ writel(recognise, &lp->eth_regs->etharc);
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static void korina_tx(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ struct dma_desc *td = &lp->td_ring[lp->tx_next_done];
+ u32 devcs;
+ u32 dmas;
+
+ spin_lock(&lp->lock);
+
+ /* Process all desc that are done */
+ while (IS_DMA_FINISHED(td->control)) {
+ if (lp->tx_full == 1) {
+ netif_wake_queue(dev);
+ lp->tx_full = 0;
+ }
+
+ devcs = lp->td_ring[lp->tx_next_done].devcs;
+ if ((devcs & (ETH_TX_FD | ETH_TX_LD)) !=
+ (ETH_TX_FD | ETH_TX_LD)) {
+ dev->stats.tx_errors++;
+ dev->stats.tx_dropped++;
+
+ /* Should never happen */
+ printk(KERN_ERR DRV_NAME "%s: split tx ignored\n",
+ dev->name);
+ } else if (devcs & ETH_TX_TOK) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes +=
+ lp->tx_skb[lp->tx_next_done]->len;
+ } else {
+ dev->stats.tx_errors++;
+ dev->stats.tx_dropped++;
+
+ /* Underflow */
+ if (devcs & ETH_TX_UND)
+ dev->stats.tx_fifo_errors++;
+
+ /* Oversized frame */
+ if (devcs & ETH_TX_OF)
+ dev->stats.tx_aborted_errors++;
+
+ /* Excessive deferrals */
+ if (devcs & ETH_TX_ED)
+ dev->stats.tx_carrier_errors++;
+
+ /* Collisions: medium busy */
+ if (devcs & ETH_TX_EC)
+ dev->stats.collisions++;
+
+ /* Late collision */
+ if (devcs & ETH_TX_LC)
+ dev->stats.tx_window_errors++;
+ }
+
+ /* We must always free the original skb */
+ if (lp->tx_skb[lp->tx_next_done]) {
+ dev_kfree_skb_any(lp->tx_skb[lp->tx_next_done]);
+ lp->tx_skb[lp->tx_next_done] = NULL;
+ }
+
+ lp->td_ring[lp->tx_next_done].control = DMA_DESC_IOF;
+ lp->td_ring[lp->tx_next_done].devcs = ETH_TX_FD | ETH_TX_LD;
+ lp->td_ring[lp->tx_next_done].link = 0;
+ lp->td_ring[lp->tx_next_done].ca = 0;
+ lp->tx_count--;
+
+ /* Go on to next transmission */
+ lp->tx_next_done = (lp->tx_next_done + 1) & KORINA_TDS_MASK;
+ td = &lp->td_ring[lp->tx_next_done];
+
+ }
+
+ /* Clear the DMA status register */
+ dmas = readl(&lp->tx_dma_regs->dmas);
+ writel(~dmas, &lp->tx_dma_regs->dmas);
+
+ writel(readl(&lp->tx_dma_regs->dmasm) &
+ ~(DMA_STAT_FINI | DMA_STAT_ERR),
+ &lp->tx_dma_regs->dmasm);
+
+ spin_unlock(&lp->lock);
+}
+
+static irqreturn_t
+korina_tx_dma_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct korina_private *lp = netdev_priv(dev);
+ u32 dmas, dmasm;
+ irqreturn_t retval;
+
+ dmas = readl(&lp->tx_dma_regs->dmas);
+
+ if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
+ korina_tx(dev);
+
+ dmasm = readl(&lp->tx_dma_regs->dmasm);
+ writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
+ &lp->tx_dma_regs->dmasm);
+
+ if (lp->tx_chain_status == desc_filled &&
+ (readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
+ writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
+ &(lp->tx_dma_regs->dmandptr));
+ lp->tx_chain_status = desc_empty;
+ lp->tx_chain_head = lp->tx_chain_tail;
+ dev->trans_start = jiffies;
+ }
+ if (dmas & DMA_STAT_ERR)
+ printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+
+ retval = IRQ_HANDLED;
+ } else
+ retval = IRQ_NONE;
+
+ return retval;
+}
+
+
+static void korina_check_media(struct net_device *dev, unsigned int init_media)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ mii_check_media(&lp->mii_if, 0, init_media);
+
+ if (lp->mii_if.full_duplex)
+ writel(readl(&lp->eth_regs->ethmac2) | ETH_MAC2_FD,
+ &lp->eth_regs->ethmac2);
+ else
+ writel(readl(&lp->eth_regs->ethmac2) & ~ETH_MAC2_FD,
+ &lp->eth_regs->ethmac2);
+}
+
+static void korina_set_carrier(struct mii_if_info *mii)
+{
+ if (mii->force_media) {
+ /* autoneg is off: Link is always assumed to be up */
+ if (!netif_carrier_ok(mii->dev))
+ netif_carrier_on(mii->dev);
+ } else /* Let MMI library update carrier status */
+ korina_check_media(mii->dev, 0);
+}
+
+static int korina_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(rq);
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+ spin_lock_irq(&lp->lock);
+ rc = generic_mii_ioctl(&lp->mii_if, data, cmd, NULL);
+ spin_unlock_irq(&lp->lock);
+ korina_set_carrier(&lp->mii_if);
+
+ return rc;
+}
+
+/* ethtool helpers */
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, lp->dev->name);
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&lp->lock);
+ rc = mii_ethtool_gset(&lp->mii_if, cmd);
+ spin_unlock_irq(&lp->lock);
+
+ return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&lp->lock);
+ rc = mii_ethtool_sset(&lp->mii_if, cmd);
+ spin_unlock_irq(&lp->lock);
+ korina_set_carrier(&lp->mii_if);
+
+ return rc;
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ return mii_link_ok(&lp->mii_if);
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_settings = netdev_get_settings,
+ .set_settings = netdev_set_settings,
+ .get_link = netdev_get_link,
+};
+
+static void korina_alloc_ring(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int i;
+
+ /* Initialize the transmit descriptors */
+ for (i = 0; i < KORINA_NUM_TDS; i++) {
+ lp->td_ring[i].control = DMA_DESC_IOF;
+ lp->td_ring[i].devcs = ETH_TX_FD | ETH_TX_LD;
+ lp->td_ring[i].ca = 0;
+ lp->td_ring[i].link = 0;
+ }
+ lp->tx_next_done = lp->tx_chain_head = lp->tx_chain_tail =
+ lp->tx_full = lp->tx_count = 0;
+ lp->tx_chain_status = desc_empty;
+
+ /* Initialize the receive descriptors */
+ for (i = 0; i < KORINA_NUM_RDS; i++) {
+ struct sk_buff *skb = lp->rx_skb[i];
+
+ skb = dev_alloc_skb(KORINA_RBSIZE + 2);
+ if (!skb)
+ break;
+ skb_reserve(skb, 2);
+ lp->rx_skb[i] = skb;
+ lp->rd_ring[i].control = DMA_DESC_IOD |
+ DMA_COUNT(KORINA_RBSIZE);
+ lp->rd_ring[i].devcs = 0;
+ lp->rd_ring[i].ca = CPHYSADDR(skb->data);
+ lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
+ }
+
+ /* loop back */
+ lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
+ lp->rx_next_done = 0;
+
+ lp->rd_ring[i].control |= DMA_DESC_COD;
+ lp->rx_chain_head = 0;
+ lp->rx_chain_tail = 0;
+ lp->rx_chain_status = desc_empty;
+}
+
+static void korina_free_ring(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < KORINA_NUM_RDS; i++) {
+ lp->rd_ring[i].control = 0;
+ if (lp->rx_skb[i])
+ dev_kfree_skb_any(lp->rx_skb[i]);
+ lp->rx_skb[i] = NULL;
+ }
+
+ for (i = 0; i < KORINA_NUM_TDS; i++) {
+ lp->td_ring[i].control = 0;
+ if (lp->tx_skb[i])
+ dev_kfree_skb_any(lp->tx_skb[i]);
+ lp->tx_skb[i] = NULL;
+ }
+}
+
+/*
+ * Initialize the RC32434 ethernet controller.
+ */
+static int korina_init(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ /* Disable DMA */
+ korina_abort_tx(dev);
+ korina_abort_rx(dev);
+
+ /* reset ethernet logic */
+ writel(0, &lp->eth_regs->ethintfc);
+ while ((readl(&lp->eth_regs->ethintfc) & ETH_INT_FC_RIP))
+ dev->trans_start = jiffies;
+
+ /* Enable Ethernet Interface */
+ writel(ETH_INT_FC_EN, &lp->eth_regs->ethintfc);
+
+ /* Allocate rings */
+ korina_alloc_ring(dev);
+
+ writel(0, &lp->rx_dma_regs->dmas);
+ /* Start Rx DMA */
+ korina_start_rx(lp, &lp->rd_ring[0]);
+
+ writel(readl(&lp->tx_dma_regs->dmasm) &
+ ~(DMA_STAT_FINI | DMA_STAT_ERR),
+ &lp->tx_dma_regs->dmasm);
+ writel(readl(&lp->rx_dma_regs->dmasm) &
+ ~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
+ &lp->rx_dma_regs->dmasm);
+
+ /* Accept only packets destined for this Ethernet device address */
+ writel(ETH_ARC_AB, &lp->eth_regs->etharc);
+
+ /* Set all Ether station address registers to their initial values */
+ writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal0);
+ writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah0);
+
+ writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal1);
+ writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah1);
+
+ writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal2);
+ writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah2);
+
+ writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal3);
+ writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah3);
+
+
+ /* Frame Length Checking, Pad Enable, CRC Enable, Full Duplex set */
+ writel(ETH_MAC2_PE | ETH_MAC2_CEN | ETH_MAC2_FD,
+ &lp->eth_regs->ethmac2);
+
+ /* Back to back inter-packet-gap */
+ writel(0x15, &lp->eth_regs->ethipgt);
+ /* Non - Back to back inter-packet-gap */
+ writel(0x12, &lp->eth_regs->ethipgr);
+
+ /* Management Clock Prescaler Divisor
+ * Clock independent setting */
+ writel(((idt_cpu_freq) / MII_CLOCK + 1) & ~1,
+ &lp->eth_regs->ethmcp);
+
+ /* don't transmit until fifo contains 48b */
+ writel(48, &lp->eth_regs->ethfifott);
+
+ writel(ETH_MAC1_RE, &lp->eth_regs->ethmac1);
+
+ napi_enable(&lp->napi);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * Restart the RC32434 ethernet controller.
+ * FIXME: check the return status where we call it
+ */
+static int korina_restart(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int ret = 0;
+
+ /*
+ * Disable interrupts
+ */
+ disable_irq(lp->rx_irq);
+ disable_irq(lp->tx_irq);
+ disable_irq(lp->ovr_irq);
+ disable_irq(lp->und_irq);
+
+ writel(readl(&lp->tx_dma_regs->dmasm) |
+ DMA_STAT_FINI | DMA_STAT_ERR,
+ &lp->tx_dma_regs->dmasm);
+ writel(readl(&lp->rx_dma_regs->dmasm) |
+ DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR,
+ &lp->rx_dma_regs->dmasm);
+
+ korina_free_ring(dev);
+
+ ret = korina_init(dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
+ dev->name);
+ return ret;
+ }
+ korina_multicast_list(dev);
+
+ enable_irq(lp->und_irq);
+ enable_irq(lp->ovr_irq);
+ enable_irq(lp->tx_irq);
+ enable_irq(lp->rx_irq);
+
+ return ret;
+}
+
+static void korina_clear_and_restart(struct net_device *dev, u32 value)
+{
+ struct korina_private *lp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ writel(value, &lp->eth_regs->ethintfc);
+ korina_restart(dev);
+}
+
+/* Ethernet Tx Underflow interrupt */
+static irqreturn_t korina_und_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct korina_private *lp = netdev_priv(dev);
+ unsigned int und;
+
+ spin_lock(&lp->lock);
+
+ und = readl(&lp->eth_regs->ethintfc);
+
+ if (und & ETH_INT_FC_UND)
+ korina_clear_and_restart(dev, und & ~ETH_INT_FC_UND);
+
+ spin_unlock(&lp->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void korina_tx_timeout(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ korina_restart(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+/* Ethernet Rx Overflow interrupt */
+static irqreturn_t
+korina_ovr_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct korina_private *lp = netdev_priv(dev);
+ unsigned int ovr;
+
+ spin_lock(&lp->lock);
+ ovr = readl(&lp->eth_regs->ethintfc);
+
+ if (ovr & ETH_INT_FC_OVR)
+ korina_clear_and_restart(dev, ovr & ~ETH_INT_FC_OVR);
+
+ spin_unlock(&lp->lock);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void korina_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ korina_tx_dma_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int korina_open(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ int ret = 0;
+
+ /* Initialize */
+ ret = korina_init(dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: cannot open device\n", dev->name);
+ goto out;
+ }
+
+ /* Install the interrupt handler
+ * that handles the Done Finished
+ * Ovr and Und Events */
+ ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
+ dev->name, lp->rx_irq);
+ goto err_release;
+ }
+ ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
+ dev->name, lp->tx_irq);
+ goto err_free_rx_irq;
+ }
+
+ /* Install handler for overrun error. */
+ ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
+ dev->name, lp->ovr_irq);
+ goto err_free_tx_irq;
+ }
+
+ /* Install handler for underflow error. */
+ ret = request_irq(lp->und_irq, &korina_und_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+ if (ret < 0) {
+ printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
+ dev->name, lp->und_irq);
+ goto err_free_ovr_irq;
+ }
+
+err_free_ovr_irq:
+ free_irq(lp->ovr_irq, dev);
+err_free_tx_irq:
+ free_irq(lp->tx_irq, dev);
+err_free_rx_irq:
+ free_irq(lp->rx_irq, dev);
+err_release:
+ korina_free_ring(dev);
+ goto out;
+out:
+ return ret;
+}
+
+static int korina_close(struct net_device *dev)
+{
+ struct korina_private *lp = netdev_priv(dev);
+ u32 tmp;
+
+ /* Disable interrupts */
+ disable_irq(lp->rx_irq);
+ disable_irq(lp->tx_irq);
+ disable_irq(lp->ovr_irq);
+ disable_irq(lp->und_irq);
+
+ korina_abort_tx(dev);
+ tmp = readl(&lp->tx_dma_regs->dmasm);
+ tmp = tmp | DMA_STAT_FINI | DMA_STAT_ERR;
+ writel(tmp, &lp->tx_dma_regs->dmasm);
+
+ korina_abort_rx(dev);
+ tmp = readl(&lp->rx_dma_regs->dmasm);
+ tmp = tmp | DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR;
+ writel(tmp, &lp->rx_dma_regs->dmasm);
+
+ korina_free_ring(dev);
+
+ free_irq(lp->rx_irq, dev);
+ free_irq(lp->tx_irq, dev);
+ free_irq(lp->ovr_irq, dev);
+ free_irq(lp->und_irq, dev);
+
+ return 0;
+}
+
+static int korina_probe(struct platform_device *pdev)
+{
+ struct korina_device *bif = platform_get_drvdata(pdev);
+ struct korina_private *lp;
+ struct net_device *dev;
+ struct resource *r;
+ int retval, err;
+
+ dev = alloc_etherdev(sizeof(struct korina_private));
+ if (!dev) {
+ printk(KERN_ERR DRV_NAME ": alloc_etherdev failed\n");
+ return -ENOMEM;
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
+ lp = netdev_priv(dev);
+
+ bif->dev = dev;
+ memcpy(dev->dev_addr, bif->mac, 6);
+
+ lp->rx_irq = platform_get_irq_byname(pdev, "korina_rx");
+ lp->tx_irq = platform_get_irq_byname(pdev, "korina_tx");
+ lp->ovr_irq = platform_get_irq_byname(pdev, "korina_ovr");
+ lp->und_irq = platform_get_irq_byname(pdev, "korina_und");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs");
+ dev->base_addr = r->start;
+ lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
+ if (!lp->eth_regs) {
+ printk(KERN_ERR DRV_NAME "cannot remap registers\n");
+ retval = -ENXIO;
+ goto probe_err_out;
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx");
+ lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
+ if (!lp->rx_dma_regs) {
+ printk(KERN_ERR DRV_NAME "cannot remap Rx DMA registers\n");
+ retval = -ENXIO;
+ goto probe_err_dma_rx;
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx");
+ lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
+ if (!lp->tx_dma_regs) {
+ printk(KERN_ERR DRV_NAME "cannot remap Tx DMA registers\n");
+ retval = -ENXIO;
+ goto probe_err_dma_tx;
+ }
+
+ lp->td_ring = kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
+ if (!lp->td_ring) {
+ printk(KERN_ERR DRV_NAME "cannot allocate descriptors\n");
+ retval = -ENOMEM;
+ goto probe_err_td_ring;
+ }
+
+ dma_cache_inv((unsigned long)(lp->td_ring),
+ TD_RING_SIZE + RD_RING_SIZE);
+
+ /* now convert TD_RING pointer to KSEG1 */
+ lp->td_ring = (struct dma_desc *)KSEG1ADDR(lp->td_ring);
+ lp->rd_ring = &lp->td_ring[KORINA_NUM_TDS];
+
+ spin_lock_init(&lp->lock);
+ /* just use the rx dma irq */
+ dev->irq = lp->rx_irq;
+ lp->dev = dev;
+
+ dev->open = korina_open;
+ dev->stop = korina_close;
+ dev->hard_start_xmit = korina_send_packet;
+ dev->set_multicast_list = &korina_multicast_list;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ dev->tx_timeout = korina_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->do_ioctl = &korina_ioctl;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = korina_poll_controller;
+#endif
+ netif_napi_add(dev, &lp->napi, korina_poll, 64);
+
+ lp->phy_addr = (((lp->rx_irq == 0x2c? 1:0) << 8) | 0x05);
+ lp->mii_if.dev = dev;
+ lp->mii_if.mdio_read = mdio_read;
+ lp->mii_if.mdio_write = mdio_write;
+ lp->mii_if.phy_id = lp->phy_addr;
+ lp->mii_if.phy_id_mask = 0x1f;
+ lp->mii_if.reg_num_mask = 0x1f;
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR DRV_NAME
+ ": cannot register net device %d\n", err);
+ retval = -EINVAL;
+ goto probe_err_register;
+ }
+ return 0;
+
+probe_err_register:
+ kfree(lp->td_ring);
+probe_err_td_ring:
+ iounmap(lp->tx_dma_regs);
+probe_err_dma_tx:
+ iounmap(lp->rx_dma_regs);
+probe_err_dma_rx:
+ iounmap(lp->eth_regs);
+probe_err_out:
+ free_netdev(dev);
+ return retval;
+}
+
+static int korina_remove(struct platform_device *pdev)
+{
+ struct korina_device *bif = platform_get_drvdata(pdev);
+ struct korina_private *lp = netdev_priv(bif->dev);
+
+ if (lp->eth_regs)
+ iounmap(lp->eth_regs);
+ if (lp->rx_dma_regs)
+ iounmap(lp->rx_dma_regs);
+ if (lp->tx_dma_regs)
+ iounmap(lp->tx_dma_regs);
+
+ platform_set_drvdata(pdev, NULL);
+ unregister_netdev(bif->dev);
+ free_netdev(bif->dev);
+
+ return 0;
+}
+
+static struct platform_driver korina_driver = {
+ .driver.name = "korina",
+ .probe = korina_probe,
+ .remove = korina_remove,
+};
+
+static int __init korina_init_module(void)
+{
+ return platform_driver_register(&korina_driver);
+}
+
+static void korina_cleanup_module(void)
+{
+ return platform_driver_unregister(&korina_driver);
+}
+
+module_init(korina_init_module);
+module_exit(korina_cleanup_module);
+
+MODULE_AUTHOR("Philip Rischel ");
+MODULE_AUTHOR("Felix Fietkau ");
+MODULE_AUTHOR("Florian Fainelli ");
+MODULE_DESCRIPTION("IDT RC32434 (Korina) Ethernet driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index f2a6e713224153bb5e6861aebce481089d227597..41b774baac4d4ce6651b51f051ecc9b003d5a623 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -258,7 +258,7 @@ static __net_init int loopback_net_init(struct net *net)
if (!dev)
goto out;
- dev->nd_net = net;
+ dev_net_set(dev, net);
err = register_netdev(dev);
if (err)
goto out_free_netdev;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 489c7c3b90d9090994e87e2a401246e9caacfa25..d513bb8a490210c3dbaac6bfcdcd2d69b77b09de 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -246,7 +246,7 @@ static int macb_mii_init(struct macb *bp)
bp->mii_bus.read = &macb_mdio_read;
bp->mii_bus.write = &macb_mdio_write;
bp->mii_bus.reset = &macb_mdio_reset;
- bp->mii_bus.id = bp->pdev->id;
+ snprintf(bp->mii_bus.id, MII_BUS_ID_SIZE, "%x", bp->pdev->id);
bp->mii_bus.priv = bp;
bp->mii_bus.dev = &bp->dev->dev;
pdata = bp->pdev->dev.platform_data;
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index f651a816b280bfcb04d1d6fdda8d12e2819b4ce5..2056cfc624dc6da62d2777c016920e86d01b5876 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -402,7 +402,7 @@ static int macvlan_newlink(struct net_device *dev,
if (!tb[IFLA_LINK])
return -EINVAL;
- lowerdev = __dev_get_by_index(dev->nd_net, nla_get_u32(tb[IFLA_LINK]));
+ lowerdev = __dev_get_by_index(dev_net(dev), nla_get_u32(tb[IFLA_LINK]));
if (lowerdev == NULL)
return -ENODEV;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 771139e283af3609b3ae1b0e46b989ec6ea1a9be..601ffd69ebc8f5b260024c1197f2fdb754ed530b 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -3,7 +3,8 @@
* Copyright (C) 2002 Matthew Dharm
*
* Based on the 64360 driver from:
- * Copyright (C) 2002 rabeeh@galileo.co.il
+ * Copyright (C) 2002 Rabeeh Khoury
+ * Rabeeh Khoury
*
* Copyright (C) 2003 PMC-Sierra, Inc.,
* written by Manish Lachwani
@@ -16,6 +17,9 @@
* Copyright (C) 2004 Steven J. Hill
*
*
+ * Copyright (C) 2007-2008 Marvell Semiconductor
+ * Lennert Buytenhek
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
@@ -63,20 +67,6 @@
#define MV643XX_TX_FAST_REFILL
#undef MV643XX_COAL
-/*
- * Number of RX / TX descriptors on RX / TX rings.
- * Note that allocating RX descriptors is done by allocating the RX
- * ring AND a preallocated RX buffers (skb's) for each descriptor.
- * The TX descriptors only allocates the TX descriptors ring,
- * with no pre allocated TX buffers (skb's are allocated by higher layers.
- */
-
-/* Default TX ring size is 1000 descriptors */
-#define MV643XX_DEFAULT_TX_QUEUE_SIZE 1000
-
-/* Default RX ring size is 400 descriptors */
-#define MV643XX_DEFAULT_RX_QUEUE_SIZE 400
-
#define MV643XX_TX_COAL 100
#ifdef MV643XX_COAL
#define MV643XX_RX_COAL 100
@@ -434,14 +424,6 @@ typedef enum _eth_func_ret_status {
ETH_QUEUE_LAST_RESOURCE /* Ring resources about to exhaust. */
} ETH_FUNC_RET_STATUS;
-typedef enum _eth_target {
- ETH_TARGET_DRAM,
- ETH_TARGET_DEVICE,
- ETH_TARGET_CBS,
- ETH_TARGET_PCI0,
- ETH_TARGET_PCI1
-} ETH_TARGET;
-
/* These are for big-endian machines. Little endian needs different
* definitions.
*/
@@ -586,43 +568,44 @@ struct mv643xx_private {
/* Static function declarations */
static void eth_port_init(struct mv643xx_private *mp);
-static void eth_port_reset(unsigned int eth_port_num);
+static void eth_port_reset(struct mv643xx_private *mp);
static void eth_port_start(struct net_device *dev);
-static void ethernet_phy_reset(unsigned int eth_port_num);
+static void ethernet_phy_reset(struct mv643xx_private *mp);
-static void eth_port_write_smi_reg(unsigned int eth_port_num,
+static void eth_port_write_smi_reg(struct mv643xx_private *mp,
unsigned int phy_reg, unsigned int value);
-static void eth_port_read_smi_reg(unsigned int eth_port_num,
+static void eth_port_read_smi_reg(struct mv643xx_private *mp,
unsigned int phy_reg, unsigned int *value);
-static void eth_clear_mib_counters(unsigned int eth_port_num);
+static void eth_clear_mib_counters(struct mv643xx_private *mp);
static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
struct pkt_info *p_pkt_info);
-static void eth_port_uc_addr_get(unsigned int port_num, unsigned char *p_addr);
-static void eth_port_uc_addr_set(unsigned int port_num, unsigned char *p_addr);
+static void eth_port_uc_addr_get(struct mv643xx_private *mp,
+ unsigned char *p_addr);
+static void eth_port_uc_addr_set(struct mv643xx_private *mp,
+ unsigned char *p_addr);
static void eth_port_set_multicast_list(struct net_device *);
-static void mv643xx_eth_port_enable_tx(unsigned int port_num,
+static void mv643xx_eth_port_enable_tx(struct mv643xx_private *mp,
unsigned int queues);
-static void mv643xx_eth_port_enable_rx(unsigned int port_num,
+static void mv643xx_eth_port_enable_rx(struct mv643xx_private *mp,
unsigned int queues);
-static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num);
-static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num);
+static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp);
+static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp);
static int mv643xx_eth_open(struct net_device *);
static int mv643xx_eth_stop(struct net_device *);
-static int mv643xx_eth_change_mtu(struct net_device *, int);
-static void eth_port_init_mac_tables(unsigned int eth_port_num);
+static void eth_port_init_mac_tables(struct mv643xx_private *mp);
#ifdef MV643XX_NAPI
static int mv643xx_poll(struct napi_struct *napi, int budget);
#endif
-static int ethernet_phy_get(unsigned int eth_port_num);
-static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
-static int ethernet_phy_detect(unsigned int eth_port_num);
+static int ethernet_phy_get(struct mv643xx_private *mp);
+static void ethernet_phy_set(struct mv643xx_private *mp, int phy_addr);
+static int ethernet_phy_detect(struct mv643xx_private *mp);
static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location);
static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val);
static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
@@ -636,12 +619,12 @@ static void __iomem *mv643xx_eth_base;
/* used to protect SMI_REG, which is shared across ports */
static DEFINE_SPINLOCK(mv643xx_eth_phy_lock);
-static inline u32 mv_read(int offset)
+static inline u32 rdl(struct mv643xx_private *mp, int offset)
{
return readl(mv643xx_eth_base + offset);
}
-static inline void mv_write(int offset, u32 data)
+static inline void wrl(struct mv643xx_private *mp, int offset, u32 data)
{
writel(data, mv643xx_eth_base + offset);
}
@@ -659,18 +642,19 @@ static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
return -EINVAL;
dev->mtu = new_mtu;
+ if (!netif_running(dev))
+ return 0;
+
/*
- * Stop then re-open the interface. This will allocate RX skb's with
- * the new MTU.
- * There is a possible danger that the open will not successed, due
- * to memory is full, which might fail the open function.
+ * Stop and then re-open the interface. This will allocate RX
+ * skbs of the new MTU.
+ * There is a possible danger that the open will not succeed,
+ * due to memory being full, which might fail the open function.
*/
- if (netif_running(dev)) {
- mv643xx_eth_stop(dev);
- if (mv643xx_eth_open(dev))
- printk(KERN_ERR
- "%s: Fatal error on opening device\n",
- dev->name);
+ mv643xx_eth_stop(dev);
+ if (mv643xx_eth_open(dev)) {
+ printk(KERN_ERR "%s: Fatal error on opening device\n",
+ dev->name);
}
return 0;
@@ -748,10 +732,9 @@ static inline void mv643xx_eth_rx_refill_descs_timer_wrapper(unsigned long data)
static void mv643xx_eth_update_mac_address(struct net_device *dev)
{
struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
- eth_port_init_mac_tables(port_num);
- eth_port_uc_addr_set(port_num, dev->dev_addr);
+ eth_port_init_mac_tables(mp);
+ eth_port_uc_addr_set(mp, dev->dev_addr);
}
/*
@@ -767,12 +750,12 @@ static void mv643xx_eth_set_rx_mode(struct net_device *dev)
struct mv643xx_private *mp = netdev_priv(dev);
u32 config_reg;
- config_reg = mv_read(PORT_CONFIG_REG(mp->port_num));
+ config_reg = rdl(mp, PORT_CONFIG_REG(mp->port_num));
if (dev->flags & IFF_PROMISC)
config_reg |= (u32) UNICAST_PROMISCUOUS_MODE;
else
config_reg &= ~(u32) UNICAST_PROMISCUOUS_MODE;
- mv_write(PORT_CONFIG_REG(mp->port_num), config_reg);
+ wrl(mp, PORT_CONFIG_REG(mp->port_num), config_reg);
eth_port_set_multicast_list(dev);
}
@@ -826,14 +809,14 @@ static void mv643xx_eth_tx_timeout_task(struct work_struct *ugly)
{
struct mv643xx_private *mp = container_of(ugly, struct mv643xx_private,
tx_timeout_task);
- struct net_device *dev = mp->mii.dev; /* yuck */
+ struct net_device *dev = mp->dev;
if (!netif_running(dev))
return;
netif_stop_queue(dev);
- eth_port_reset(mp->port_num);
+ eth_port_reset(mp);
eth_port_start(dev);
if (mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
@@ -845,7 +828,7 @@ static void mv643xx_eth_tx_timeout_task(struct work_struct *ugly)
*
* If force is non-zero, frees uncompleted descriptors as well
*/
-int mv643xx_eth_free_tx_descs(struct net_device *dev, int force)
+static int mv643xx_eth_free_tx_descs(struct net_device *dev, int force)
{
struct mv643xx_private *mp = netdev_priv(dev);
struct eth_tx_desc *desc;
@@ -1008,7 +991,7 @@ static void mv643xx_eth_update_pscr(struct net_device *dev,
u32 o_pscr, n_pscr;
unsigned int queues;
- o_pscr = mv_read(PORT_SERIAL_CONTROL_REG(port_num));
+ o_pscr = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
n_pscr = o_pscr;
/* clear speed, duplex and rx buffer size fields */
@@ -1031,16 +1014,16 @@ static void mv643xx_eth_update_pscr(struct net_device *dev,
if (n_pscr != o_pscr) {
if ((o_pscr & SERIAL_PORT_ENABLE) == 0)
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
else {
- queues = mv643xx_eth_port_disable_tx(port_num);
+ queues = mv643xx_eth_port_disable_tx(mp);
o_pscr &= ~SERIAL_PORT_ENABLE;
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), o_pscr);
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), o_pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), n_pscr);
if (queues)
- mv643xx_eth_port_enable_tx(port_num, queues);
+ mv643xx_eth_port_enable_tx(mp, queues);
}
}
}
@@ -1064,13 +1047,13 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
unsigned int port_num = mp->port_num;
/* Read interrupt cause registers */
- eth_int_cause = mv_read(INTERRUPT_CAUSE_REG(port_num)) &
+ eth_int_cause = rdl(mp, INTERRUPT_CAUSE_REG(port_num)) &
ETH_INT_UNMASK_ALL;
if (eth_int_cause & ETH_INT_CAUSE_EXT) {
- eth_int_cause_ext = mv_read(
+ eth_int_cause_ext = rdl(mp,
INTERRUPT_CAUSE_EXTEND_REG(port_num)) &
ETH_INT_UNMASK_ALL_EXT;
- mv_write(INTERRUPT_CAUSE_EXTEND_REG(port_num),
+ wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num),
~eth_int_cause_ext);
}
@@ -1081,8 +1064,7 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
if (mii_link_ok(&mp->mii)) {
mii_ethtool_gset(&mp->mii, &cmd);
mv643xx_eth_update_pscr(dev, &cmd);
- mv643xx_eth_port_enable_tx(port_num,
- ETH_TX_QUEUES_ENABLED);
+ mv643xx_eth_port_enable_tx(mp, ETH_TX_QUEUES_ENABLED);
if (!netif_carrier_ok(dev)) {
netif_carrier_on(dev);
if (mp->tx_ring_size - mp->tx_desc_count >=
@@ -1098,10 +1080,10 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
#ifdef MV643XX_NAPI
if (eth_int_cause & ETH_INT_CAUSE_RX) {
/* schedule the NAPI poll routine to maintain port */
- mv_write(INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
+ wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
/* wait for previous write to complete */
- mv_read(INTERRUPT_MASK_REG(port_num));
+ rdl(mp, INTERRUPT_MASK_REG(port_num));
netif_rx_schedule(dev, &mp->napi);
}
@@ -1136,7 +1118,7 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
* , and the required delay of the interrupt in usec.
*
* INPUT:
- * unsigned int eth_port_num Ethernet port number
+ * struct mv643xx_private *mp Ethernet port
* unsigned int t_clk t_clk of the MV-643xx chip in HZ units
* unsigned int delay Delay in usec
*
@@ -1147,15 +1129,16 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
* The interrupt coalescing value set in the gigE port.
*
*/
-static unsigned int eth_port_set_rx_coal(unsigned int eth_port_num,
+static unsigned int eth_port_set_rx_coal(struct mv643xx_private *mp,
unsigned int t_clk, unsigned int delay)
{
+ unsigned int port_num = mp->port_num;
unsigned int coal = ((t_clk / 1000000) * delay) / 64;
/* Set RX Coalescing mechanism */
- mv_write(SDMA_CONFIG_REG(eth_port_num),
+ wrl(mp, SDMA_CONFIG_REG(port_num),
((coal & 0x3fff) << 8) |
- (mv_read(SDMA_CONFIG_REG(eth_port_num))
+ (rdl(mp, SDMA_CONFIG_REG(port_num))
& 0xffc000ff));
return coal;
@@ -1174,7 +1157,7 @@ static unsigned int eth_port_set_rx_coal(unsigned int eth_port_num,
* MV-643xx chip and the required delay in the interrupt in uSec
*
* INPUT:
- * unsigned int eth_port_num Ethernet port number
+ * struct mv643xx_private *mp Ethernet port
* unsigned int t_clk t_clk of the MV-643xx chip in HZ units
* unsigned int delay Delay in uSeconds
*
@@ -1185,13 +1168,14 @@ static unsigned int eth_port_set_rx_coal(unsigned int eth_port_num,
* The interrupt coalescing value set in the gigE port.
*
*/
-static unsigned int eth_port_set_tx_coal(unsigned int eth_port_num,
+static unsigned int eth_port_set_tx_coal(struct mv643xx_private *mp,
unsigned int t_clk, unsigned int delay)
{
- unsigned int coal;
- coal = ((t_clk / 1000000) * delay) / 64;
+ unsigned int coal = ((t_clk / 1000000) * delay) / 64;
+
/* Set TX Coalescing mechanism */
- mv_write(TX_FIFO_URGENT_THRESHOLD_REG(eth_port_num), coal << 4);
+ wrl(mp, TX_FIFO_URGENT_THRESHOLD_REG(mp->port_num), coal << 4);
+
return coal;
}
@@ -1327,16 +1311,15 @@ static int mv643xx_eth_open(struct net_device *dev)
int err;
/* Clear any pending ethernet port interrupts */
- mv_write(INTERRUPT_CAUSE_REG(port_num), 0);
- mv_write(INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
+ wrl(mp, INTERRUPT_CAUSE_REG(port_num), 0);
+ wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
/* wait for previous write to complete */
- mv_read (INTERRUPT_CAUSE_EXTEND_REG(port_num));
+ rdl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num));
err = request_irq(dev->irq, mv643xx_eth_int_handler,
IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (err) {
- printk(KERN_ERR "Can not assign IRQ number to MV643XX_eth%d\n",
- port_num);
+ printk(KERN_ERR "%s: Can not assign IRQ\n", dev->name);
return -EAGAIN;
}
@@ -1430,17 +1413,17 @@ static int mv643xx_eth_open(struct net_device *dev)
#ifdef MV643XX_COAL
mp->rx_int_coal =
- eth_port_set_rx_coal(port_num, 133000000, MV643XX_RX_COAL);
+ eth_port_set_rx_coal(mp, 133000000, MV643XX_RX_COAL);
#endif
mp->tx_int_coal =
- eth_port_set_tx_coal(port_num, 133000000, MV643XX_TX_COAL);
+ eth_port_set_tx_coal(mp, 133000000, MV643XX_TX_COAL);
/* Unmask phy and link status changes interrupts */
- mv_write(INTERRUPT_EXTEND_MASK_REG(port_num), ETH_INT_UNMASK_ALL_EXT);
+ wrl(mp, INTERRUPT_EXTEND_MASK_REG(port_num), ETH_INT_UNMASK_ALL_EXT);
/* Unmask RX buffer and TX end interrupt */
- mv_write(INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
+ wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
return 0;
@@ -1459,7 +1442,7 @@ static void mv643xx_eth_free_tx_rings(struct net_device *dev)
struct mv643xx_private *mp = netdev_priv(dev);
/* Stop Tx Queues */
- mv643xx_eth_port_disable_tx(mp->port_num);
+ mv643xx_eth_port_disable_tx(mp);
/* Free outstanding skb's on TX ring */
mv643xx_eth_free_all_tx_descs(dev);
@@ -1477,11 +1460,10 @@ static void mv643xx_eth_free_tx_rings(struct net_device *dev)
static void mv643xx_eth_free_rx_rings(struct net_device *dev)
{
struct mv643xx_private *mp = netdev_priv(dev);
- unsigned int port_num = mp->port_num;
int curr;
/* Stop RX Queues */
- mv643xx_eth_port_disable_rx(port_num);
+ mv643xx_eth_port_disable_rx(mp);
/* Free preallocated skb's on RX rings */
for (curr = 0; mp->rx_desc_count && curr < mp->rx_ring_size; curr++) {
@@ -1520,9 +1502,9 @@ static int mv643xx_eth_stop(struct net_device *dev)
unsigned int port_num = mp->port_num;
/* Mask all interrupts on ethernet port */
- mv_write(INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
+ wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
/* wait for previous write to complete */
- mv_read(INTERRUPT_MASK_REG(port_num));
+ rdl(mp, INTERRUPT_MASK_REG(port_num));
#ifdef MV643XX_NAPI
napi_disable(&mp->napi);
@@ -1530,7 +1512,7 @@ static int mv643xx_eth_stop(struct net_device *dev)
netif_carrier_off(dev);
netif_stop_queue(dev);
- eth_port_reset(mp->port_num);
+ eth_port_reset(mp);
mv643xx_eth_free_tx_rings(dev);
mv643xx_eth_free_rx_rings(dev);
@@ -1561,15 +1543,15 @@ static int mv643xx_poll(struct napi_struct *napi, int budget)
#endif
work_done = 0;
- if ((mv_read(RX_CURRENT_QUEUE_DESC_PTR_0(port_num)))
+ if ((rdl(mp, RX_CURRENT_QUEUE_DESC_PTR_0(port_num)))
!= (u32) mp->rx_used_desc_q)
work_done = mv643xx_eth_receive_queue(dev, budget);
if (work_done < budget) {
netif_rx_complete(dev, napi);
- mv_write(INTERRUPT_CAUSE_REG(port_num), 0);
- mv_write(INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
- mv_write(INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
+ wrl(mp, INTERRUPT_CAUSE_REG(port_num), 0);
+ wrl(mp, INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
+ wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
}
return work_done;
@@ -1723,7 +1705,7 @@ static void eth_tx_submit_descs_for_skb(struct mv643xx_private *mp,
/* ensure all descriptors are written before poking hardware */
wmb();
- mv643xx_eth_port_enable_tx(mp->port_num, ETH_TX_QUEUES_ENABLED);
+ mv643xx_eth_port_enable_tx(mp, ETH_TX_QUEUES_ENABLED);
mp->tx_desc_count += nr_frags + 1;
}
@@ -1739,25 +1721,23 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
unsigned long flags;
BUG_ON(netif_queue_stopped(dev));
- BUG_ON(skb == NULL);
+
+ if (has_tiny_unaligned_frags(skb) && __skb_linearize(skb)) {
+ stats->tx_dropped++;
+ printk(KERN_DEBUG "%s: failed to linearize tiny "
+ "unaligned fragment\n", dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ spin_lock_irqsave(&mp->lock, flags);
if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB) {
printk(KERN_ERR "%s: transmit with queue full\n", dev->name);
netif_stop_queue(dev);
- return 1;
- }
-
- if (has_tiny_unaligned_frags(skb)) {
- if (__skb_linearize(skb)) {
- stats->tx_dropped++;
- printk(KERN_DEBUG "%s: failed to linearize tiny "
- "unaligned fragment\n", dev->name);
- return 1;
- }
+ spin_unlock_irqrestore(&mp->lock, flags);
+ return NETDEV_TX_BUSY;
}
- spin_lock_irqsave(&mp->lock, flags);
-
eth_tx_submit_descs_for_skb(mp, skb);
stats->tx_bytes += skb->len;
stats->tx_packets++;
@@ -1768,7 +1748,7 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
spin_unlock_irqrestore(&mp->lock, flags);
- return 0; /* success */
+ return NETDEV_TX_OK;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1777,13 +1757,13 @@ static void mv643xx_netpoll(struct net_device *netdev)
struct mv643xx_private *mp = netdev_priv(netdev);
int port_num = mp->port_num;
- mv_write(INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
+ wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
/* wait for previous write to complete */
- mv_read(INTERRUPT_MASK_REG(port_num));
+ rdl(mp, INTERRUPT_MASK_REG(port_num));
mv643xx_eth_int_handler(netdev->irq, netdev);
- mv_write(INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
+ wrl(mp, INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
}
#endif
@@ -1900,7 +1880,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
port_num = mp->port_num = pd->port_number;
/* set default config values */
- eth_port_uc_addr_get(port_num, dev->dev_addr);
+ eth_port_uc_addr_get(mp, dev->dev_addr);
mp->rx_ring_size = PORT_DEFAULT_RECEIVE_QUEUE_SIZE;
mp->tx_ring_size = PORT_DEFAULT_TRANSMIT_QUEUE_SIZE;
@@ -1908,7 +1888,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
memcpy(dev->dev_addr, pd->mac_addr, 6);
if (pd->phy_addr || pd->force_phy_addr)
- ethernet_phy_set(port_num, pd->phy_addr);
+ ethernet_phy_set(mp, pd->phy_addr);
if (pd->rx_queue_size)
mp->rx_ring_size = pd->rx_queue_size;
@@ -1933,19 +1913,18 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
mp->mii.dev = dev;
mp->mii.mdio_read = mv643xx_mdio_read;
mp->mii.mdio_write = mv643xx_mdio_write;
- mp->mii.phy_id = ethernet_phy_get(port_num);
+ mp->mii.phy_id = ethernet_phy_get(mp);
mp->mii.phy_id_mask = 0x3f;
mp->mii.reg_num_mask = 0x1f;
- err = ethernet_phy_detect(port_num);
+ err = ethernet_phy_detect(mp);
if (err) {
- pr_debug("MV643xx ethernet port %d: "
- "No PHY detected at addr %d\n",
- port_num, ethernet_phy_get(port_num));
+ pr_debug("%s: No PHY detected at addr %d\n",
+ dev->name, ethernet_phy_get(mp));
goto out;
}
- ethernet_phy_reset(port_num);
+ ethernet_phy_reset(mp);
mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
mv643xx_init_ethtool_cmd(dev, mp->mii.phy_id, speed, duplex, &cmd);
mv643xx_eth_update_pscr(dev, &cmd);
@@ -2006,9 +1985,11 @@ static int mv643xx_eth_remove(struct platform_device *pdev)
static int mv643xx_eth_shared_probe(struct platform_device *pdev)
{
+ static int mv643xx_version_printed = 0;
struct resource *res;
- printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
+ if (!mv643xx_version_printed++)
+ printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL)
@@ -2037,10 +2018,10 @@ static void mv643xx_eth_shutdown(struct platform_device *pdev)
unsigned int port_num = mp->port_num;
/* Mask all interrupts on ethernet port */
- mv_write(INTERRUPT_MASK_REG(port_num), 0);
- mv_read (INTERRUPT_MASK_REG(port_num));
+ wrl(mp, INTERRUPT_MASK_REG(port_num), 0);
+ rdl(mp, INTERRUPT_MASK_REG(port_num));
- eth_port_reset(port_num);
+ eth_port_reset(mp);
}
static struct platform_driver mv643xx_eth_driver = {
@@ -2229,12 +2210,9 @@ MODULE_ALIAS("platform:mv643xx_eth");
* return_info Tx/Rx user resource return information.
*/
-/* PHY routines */
-static int ethernet_phy_get(unsigned int eth_port_num);
-static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
-
/* Ethernet Port routines */
-static void eth_port_set_filter_table_entry(int table, unsigned char entry);
+static void eth_port_set_filter_table_entry(struct mv643xx_private *mp,
+ int table, unsigned char entry);
/*
* eth_port_init - Initialize the Ethernet port driver
@@ -2264,9 +2242,9 @@ static void eth_port_init(struct mv643xx_private *mp)
{
mp->rx_resource_err = 0;
- eth_port_reset(mp->port_num);
+ eth_port_reset(mp);
- eth_port_init_mac_tables(mp->port_num);
+ eth_port_init_mac_tables(mp);
}
/*
@@ -2306,28 +2284,28 @@ static void eth_port_start(struct net_device *dev)
/* Assignment of Tx CTRP of given queue */
tx_curr_desc = mp->tx_curr_desc_q;
- mv_write(TX_CURRENT_QUEUE_DESC_PTR_0(port_num),
+ wrl(mp, TX_CURRENT_QUEUE_DESC_PTR_0(port_num),
(u32)((struct eth_tx_desc *)mp->tx_desc_dma + tx_curr_desc));
/* Assignment of Rx CRDP of given queue */
rx_curr_desc = mp->rx_curr_desc_q;
- mv_write(RX_CURRENT_QUEUE_DESC_PTR_0(port_num),
+ wrl(mp, RX_CURRENT_QUEUE_DESC_PTR_0(port_num),
(u32)((struct eth_rx_desc *)mp->rx_desc_dma + rx_curr_desc));
/* Add the assigned Ethernet address to the port's address table */
- eth_port_uc_addr_set(port_num, dev->dev_addr);
+ eth_port_uc_addr_set(mp, dev->dev_addr);
/* Assign port configuration and command. */
- mv_write(PORT_CONFIG_REG(port_num),
+ wrl(mp, PORT_CONFIG_REG(port_num),
PORT_CONFIG_DEFAULT_VALUE);
- mv_write(PORT_CONFIG_EXTEND_REG(port_num),
+ wrl(mp, PORT_CONFIG_EXTEND_REG(port_num),
PORT_CONFIG_EXTEND_DEFAULT_VALUE);
- pscr = mv_read(PORT_SERIAL_CONTROL_REG(port_num));
+ pscr = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS);
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
DISABLE_AUTO_NEG_SPEED_GMII |
@@ -2335,32 +2313,34 @@ static void eth_port_start(struct net_device *dev)
DO_NOT_FORCE_LINK_FAIL |
SERIAL_PORT_CONTROL_RESERVED;
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
pscr |= SERIAL_PORT_ENABLE;
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), pscr);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), pscr);
/* Assign port SDMA configuration */
- mv_write(SDMA_CONFIG_REG(port_num),
+ wrl(mp, SDMA_CONFIG_REG(port_num),
PORT_SDMA_CONFIG_DEFAULT_VALUE);
/* Enable port Rx. */
- mv643xx_eth_port_enable_rx(port_num, ETH_RX_QUEUES_ENABLED);
+ mv643xx_eth_port_enable_rx(mp, ETH_RX_QUEUES_ENABLED);
/* Disable port bandwidth limits by clearing MTU register */
- mv_write(MAXIMUM_TRANSMIT_UNIT(port_num), 0);
+ wrl(mp, MAXIMUM_TRANSMIT_UNIT(port_num), 0);
/* save phy settings across reset */
mv643xx_get_settings(dev, ðtool_cmd);
- ethernet_phy_reset(mp->port_num);
+ ethernet_phy_reset(mp);
mv643xx_set_settings(dev, ðtool_cmd);
}
/*
* eth_port_uc_addr_set - Write a MAC address into the port's hw registers
*/
-static void eth_port_uc_addr_set(unsigned int port_num, unsigned char *p_addr)
+static void eth_port_uc_addr_set(struct mv643xx_private *mp,
+ unsigned char *p_addr)
{
+ unsigned int port_num = mp->port_num;
unsigned int mac_h;
unsigned int mac_l;
int table;
@@ -2369,24 +2349,26 @@ static void eth_port_uc_addr_set(unsigned int port_num, unsigned char *p_addr)
mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
(p_addr[3] << 0);
- mv_write(MAC_ADDR_LOW(port_num), mac_l);
- mv_write(MAC_ADDR_HIGH(port_num), mac_h);
+ wrl(mp, MAC_ADDR_LOW(port_num), mac_l);
+ wrl(mp, MAC_ADDR_HIGH(port_num), mac_h);
/* Accept frames with this address */
table = DA_FILTER_UNICAST_TABLE_BASE(port_num);
- eth_port_set_filter_table_entry(table, p_addr[5] & 0x0f);
+ eth_port_set_filter_table_entry(mp, table, p_addr[5] & 0x0f);
}
/*
* eth_port_uc_addr_get - Read the MAC address from the port's hw registers
*/
-static void eth_port_uc_addr_get(unsigned int port_num, unsigned char *p_addr)
+static void eth_port_uc_addr_get(struct mv643xx_private *mp,
+ unsigned char *p_addr)
{
+ unsigned int port_num = mp->port_num;
unsigned int mac_h;
unsigned int mac_l;
- mac_h = mv_read(MAC_ADDR_HIGH(port_num));
- mac_l = mv_read(MAC_ADDR_LOW(port_num));
+ mac_h = rdl(mp, MAC_ADDR_HIGH(port_num));
+ mac_l = rdl(mp, MAC_ADDR_LOW(port_num));
p_addr[0] = (mac_h >> 24) & 0xff;
p_addr[1] = (mac_h >> 16) & 0xff;
@@ -2405,7 +2387,8 @@ static void eth_port_uc_addr_get(unsigned int port_num, unsigned char *p_addr)
* 3-1 Queue (ETH_Q0=0)
* 7-4 Reserved = 0;
*/
-static void eth_port_set_filter_table_entry(int table, unsigned char entry)
+static void eth_port_set_filter_table_entry(struct mv643xx_private *mp,
+ int table, unsigned char entry)
{
unsigned int table_reg;
unsigned int tbl_offset;
@@ -2415,9 +2398,9 @@ static void eth_port_set_filter_table_entry(int table, unsigned char entry)
reg_offset = entry % 4; /* Entry offset within the register */
/* Set "accepts frame bit" at specified table entry */
- table_reg = mv_read(table + tbl_offset);
+ table_reg = rdl(mp, table + tbl_offset);
table_reg |= 0x01 << (8 * reg_offset);
- mv_write(table + tbl_offset, table_reg);
+ wrl(mp, table + tbl_offset, table_reg);
}
/*
@@ -2434,8 +2417,9 @@ static void eth_port_set_filter_table_entry(int table, unsigned char entry)
* In either case, eth_port_set_filter_table_entry() is then called
* to set to set the actual table entry.
*/
-static void eth_port_mc_addr(unsigned int eth_port_num, unsigned char *p_addr)
+static void eth_port_mc_addr(struct mv643xx_private *mp, unsigned char *p_addr)
{
+ unsigned int port_num = mp->port_num;
unsigned int mac_h;
unsigned int mac_l;
unsigned char crc_result = 0;
@@ -2446,9 +2430,8 @@ static void eth_port_mc_addr(unsigned int eth_port_num, unsigned char *p_addr)
if ((p_addr[0] == 0x01) && (p_addr[1] == 0x00) &&
(p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) {
- table = DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
- (eth_port_num);
- eth_port_set_filter_table_entry(table, p_addr[5]);
+ table = DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port_num);
+ eth_port_set_filter_table_entry(mp, table, p_addr[5]);
return;
}
@@ -2520,8 +2503,8 @@ static void eth_port_mc_addr(unsigned int eth_port_num, unsigned char *p_addr)
for (i = 0; i < 8; i++)
crc_result = crc_result | (crc[i] << i);
- table = DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num);
- eth_port_set_filter_table_entry(table, crc_result);
+ table = DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port_num);
+ eth_port_set_filter_table_entry(mp, table, crc_result);
}
/*
@@ -2550,7 +2533,7 @@ static void eth_port_set_multicast_list(struct net_device *dev)
* 3-1 Queue ETH_Q0=0
* 7-4 Reserved = 0;
*/
- mv_write(DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
/* Set all entries in DA filter other multicast
* table (Ex_dFOMT)
@@ -2560,7 +2543,7 @@ static void eth_port_set_multicast_list(struct net_device *dev)
* 3-1 Queue ETH_Q0=0
* 7-4 Reserved = 0;
*/
- mv_write(DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
}
return;
}
@@ -2570,11 +2553,11 @@ static void eth_port_set_multicast_list(struct net_device *dev)
*/
for (table_index = 0; table_index <= 0xFC; table_index += 4) {
/* Clear DA filter special multicast table (Ex_dFSMT) */
- mv_write(DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
+ wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
(eth_port_num) + table_index, 0);
/* Clear DA filter other multicast table (Ex_dFOMT) */
- mv_write(DA_FILTER_OTHER_MULTICAST_TABLE_BASE
+ wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE
(eth_port_num) + table_index, 0);
}
@@ -2583,7 +2566,7 @@ static void eth_port_set_multicast_list(struct net_device *dev)
(i < 256) && (mc_list != NULL) && (i < dev->mc_count);
i++, mc_list = mc_list->next)
if (mc_list->dmi_addrlen == 6)
- eth_port_mc_addr(eth_port_num, mc_list->dmi_addr);
+ eth_port_mc_addr(mp, mc_list->dmi_addr);
}
/*
@@ -2594,7 +2577,7 @@ static void eth_port_set_multicast_list(struct net_device *dev)
* Other Multicast) and set each entry to 0.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
*
* OUTPUT:
* Multicast and Unicast packets are rejected.
@@ -2602,22 +2585,23 @@ static void eth_port_set_multicast_list(struct net_device *dev)
* RETURN:
* None.
*/
-static void eth_port_init_mac_tables(unsigned int eth_port_num)
+static void eth_port_init_mac_tables(struct mv643xx_private *mp)
{
+ unsigned int port_num = mp->port_num;
int table_index;
/* Clear DA filter unicast table (Ex_dFUT) */
for (table_index = 0; table_index <= 0xC; table_index += 4)
- mv_write(DA_FILTER_UNICAST_TABLE_BASE
- (eth_port_num) + table_index, 0);
+ wrl(mp, DA_FILTER_UNICAST_TABLE_BASE(port_num) +
+ table_index, 0);
for (table_index = 0; table_index <= 0xFC; table_index += 4) {
/* Clear DA filter special multicast table (Ex_dFSMT) */
- mv_write(DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
- (eth_port_num) + table_index, 0);
+ wrl(mp, DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(port_num) +
+ table_index, 0);
/* Clear DA filter other multicast table (Ex_dFOMT) */
- mv_write(DA_FILTER_OTHER_MULTICAST_TABLE_BASE
- (eth_port_num) + table_index, 0);
+ wrl(mp, DA_FILTER_OTHER_MULTICAST_TABLE_BASE(port_num) +
+ table_index, 0);
}
}
@@ -2629,7 +2613,7 @@ static void eth_port_init_mac_tables(unsigned int eth_port_num)
* A read from the MIB counter will reset the counter.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
*
* OUTPUT:
* After reading all MIB counters, the counters resets.
@@ -2638,19 +2622,20 @@ static void eth_port_init_mac_tables(unsigned int eth_port_num)
* MIB counter value.
*
*/
-static void eth_clear_mib_counters(unsigned int eth_port_num)
+static void eth_clear_mib_counters(struct mv643xx_private *mp)
{
+ unsigned int port_num = mp->port_num;
int i;
/* Perform dummy reads from MIB counters */
for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
i += 4)
- mv_read(MIB_COUNTERS_BASE(eth_port_num) + i);
+ rdl(mp, MIB_COUNTERS_BASE(port_num) + i);
}
static inline u32 read_mib(struct mv643xx_private *mp, int offset)
{
- return mv_read(MIB_COUNTERS_BASE(mp->port_num) + offset);
+ return rdl(mp, MIB_COUNTERS_BASE(mp->port_num) + offset);
}
static void eth_update_mib_counters(struct mv643xx_private *mp)
@@ -2686,7 +2671,7 @@ static void eth_update_mib_counters(struct mv643xx_private *mp)
* the specified port.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
*
* OUTPUT:
* None
@@ -2696,22 +2681,22 @@ static void eth_update_mib_counters(struct mv643xx_private *mp)
* -ENODEV on failure
*
*/
-static int ethernet_phy_detect(unsigned int port_num)
+static int ethernet_phy_detect(struct mv643xx_private *mp)
{
unsigned int phy_reg_data0;
int auto_neg;
- eth_port_read_smi_reg(port_num, 0, &phy_reg_data0);
+ eth_port_read_smi_reg(mp, 0, &phy_reg_data0);
auto_neg = phy_reg_data0 & 0x1000;
phy_reg_data0 ^= 0x1000; /* invert auto_neg */
- eth_port_write_smi_reg(port_num, 0, phy_reg_data0);
+ eth_port_write_smi_reg(mp, 0, phy_reg_data0);
- eth_port_read_smi_reg(port_num, 0, &phy_reg_data0);
+ eth_port_read_smi_reg(mp, 0, &phy_reg_data0);
if ((phy_reg_data0 & 0x1000) == auto_neg)
return -ENODEV; /* change didn't take */
phy_reg_data0 ^= 0x1000;
- eth_port_write_smi_reg(port_num, 0, phy_reg_data0);
+ eth_port_write_smi_reg(mp, 0, phy_reg_data0);
return 0;
}
@@ -2722,7 +2707,7 @@ static int ethernet_phy_detect(unsigned int port_num)
* This routine returns the given ethernet port PHY address.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
*
* OUTPUT:
* None.
@@ -2731,13 +2716,13 @@ static int ethernet_phy_detect(unsigned int port_num)
* PHY address.
*
*/
-static int ethernet_phy_get(unsigned int eth_port_num)
+static int ethernet_phy_get(struct mv643xx_private *mp)
{
unsigned int reg_data;
- reg_data = mv_read(PHY_ADDR_REG);
+ reg_data = rdl(mp, PHY_ADDR_REG);
- return ((reg_data >> (5 * eth_port_num)) & 0x1f);
+ return ((reg_data >> (5 * mp->port_num)) & 0x1f);
}
/*
@@ -2747,7 +2732,7 @@ static int ethernet_phy_get(unsigned int eth_port_num)
* This routine sets the given ethernet port PHY address.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
* int phy_addr PHY address.
*
* OUTPUT:
@@ -2757,15 +2742,15 @@ static int ethernet_phy_get(unsigned int eth_port_num)
* None.
*
*/
-static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr)
+static void ethernet_phy_set(struct mv643xx_private *mp, int phy_addr)
{
u32 reg_data;
- int addr_shift = 5 * eth_port_num;
+ int addr_shift = 5 * mp->port_num;
- reg_data = mv_read(PHY_ADDR_REG);
+ reg_data = rdl(mp, PHY_ADDR_REG);
reg_data &= ~(0x1f << addr_shift);
reg_data |= (phy_addr & 0x1f) << addr_shift;
- mv_write(PHY_ADDR_REG, reg_data);
+ wrl(mp, PHY_ADDR_REG, reg_data);
}
/*
@@ -2775,7 +2760,7 @@ static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr)
* This routine utilizes the SMI interface to reset the ethernet port PHY.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
*
* OUTPUT:
* The PHY is reset.
@@ -2784,51 +2769,52 @@ static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr)
* None.
*
*/
-static void ethernet_phy_reset(unsigned int eth_port_num)
+static void ethernet_phy_reset(struct mv643xx_private *mp)
{
unsigned int phy_reg_data;
/* Reset the PHY */
- eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
+ eth_port_read_smi_reg(mp, 0, &phy_reg_data);
phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
- eth_port_write_smi_reg(eth_port_num, 0, phy_reg_data);
+ eth_port_write_smi_reg(mp, 0, phy_reg_data);
/* wait for PHY to come out of reset */
do {
udelay(1);
- eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
+ eth_port_read_smi_reg(mp, 0, &phy_reg_data);
} while (phy_reg_data & 0x8000);
}
-static void mv643xx_eth_port_enable_tx(unsigned int port_num,
+static void mv643xx_eth_port_enable_tx(struct mv643xx_private *mp,
unsigned int queues)
{
- mv_write(TRANSMIT_QUEUE_COMMAND_REG(port_num), queues);
+ wrl(mp, TRANSMIT_QUEUE_COMMAND_REG(mp->port_num), queues);
}
-static void mv643xx_eth_port_enable_rx(unsigned int port_num,
+static void mv643xx_eth_port_enable_rx(struct mv643xx_private *mp,
unsigned int queues)
{
- mv_write(RECEIVE_QUEUE_COMMAND_REG(port_num), queues);
+ wrl(mp, RECEIVE_QUEUE_COMMAND_REG(mp->port_num), queues);
}
-static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num)
+static unsigned int mv643xx_eth_port_disable_tx(struct mv643xx_private *mp)
{
+ unsigned int port_num = mp->port_num;
u32 queues;
/* Stop Tx port activity. Check port Tx activity. */
- queues = mv_read(TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF;
+ queues = rdl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF;
if (queues) {
/* Issue stop command for active queues only */
- mv_write(TRANSMIT_QUEUE_COMMAND_REG(port_num), (queues << 8));
+ wrl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num), (queues << 8));
/* Wait for all Tx activity to terminate. */
/* Check port cause register that all Tx queues are stopped */
- while (mv_read(TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF)
+ while (rdl(mp, TRANSMIT_QUEUE_COMMAND_REG(port_num)) & 0xFF)
udelay(PHY_WAIT_MICRO_SECONDS);
/* Wait for Tx FIFO to empty */
- while (mv_read(PORT_STATUS_REG(port_num)) &
+ while (rdl(mp, PORT_STATUS_REG(port_num)) &
ETH_PORT_TX_FIFO_EMPTY)
udelay(PHY_WAIT_MICRO_SECONDS);
}
@@ -2836,19 +2822,20 @@ static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num)
return queues;
}
-static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
+static unsigned int mv643xx_eth_port_disable_rx(struct mv643xx_private *mp)
{
+ unsigned int port_num = mp->port_num;
u32 queues;
/* Stop Rx port activity. Check port Rx activity. */
- queues = mv_read(RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF;
+ queues = rdl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF;
if (queues) {
/* Issue stop command for active queues only */
- mv_write(RECEIVE_QUEUE_COMMAND_REG(port_num), (queues << 8));
+ wrl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num), (queues << 8));
/* Wait for all Rx activity to terminate. */
/* Check port cause register that all Rx queues are stopped */
- while (mv_read(RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF)
+ while (rdl(mp, RECEIVE_QUEUE_COMMAND_REG(port_num)) & 0xFF)
udelay(PHY_WAIT_MICRO_SECONDS);
}
@@ -2864,7 +2851,7 @@ static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
* idle state after this command is performed and the port is disabled.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
*
* OUTPUT:
* Channel activity is halted.
@@ -2873,22 +2860,23 @@ static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
* None.
*
*/
-static void eth_port_reset(unsigned int port_num)
+static void eth_port_reset(struct mv643xx_private *mp)
{
+ unsigned int port_num = mp->port_num;
unsigned int reg_data;
- mv643xx_eth_port_disable_tx(port_num);
- mv643xx_eth_port_disable_rx(port_num);
+ mv643xx_eth_port_disable_tx(mp);
+ mv643xx_eth_port_disable_rx(mp);
/* Clear all MIB counters */
- eth_clear_mib_counters(port_num);
+ eth_clear_mib_counters(mp);
/* Reset the Enable bit in the Configuration Register */
- reg_data = mv_read(PORT_SERIAL_CONTROL_REG(port_num));
+ reg_data = rdl(mp, PORT_SERIAL_CONTROL_REG(port_num));
reg_data &= ~(SERIAL_PORT_ENABLE |
DO_NOT_FORCE_LINK_FAIL |
FORCE_LINK_PASS);
- mv_write(PORT_SERIAL_CONTROL_REG(port_num), reg_data);
+ wrl(mp, PORT_SERIAL_CONTROL_REG(port_num), reg_data);
}
@@ -2900,7 +2888,7 @@ static void eth_port_reset(unsigned int port_num)
* order to perform PHY register read.
*
* INPUT:
- * unsigned int port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
* unsigned int phy_reg PHY register address offset.
* unsigned int *value Register value buffer.
*
@@ -2912,10 +2900,10 @@ static void eth_port_reset(unsigned int port_num)
* true otherwise.
*
*/
-static void eth_port_read_smi_reg(unsigned int port_num,
+static void eth_port_read_smi_reg(struct mv643xx_private *mp,
unsigned int phy_reg, unsigned int *value)
{
- int phy_addr = ethernet_phy_get(port_num);
+ int phy_addr = ethernet_phy_get(mp);
unsigned long flags;
int i;
@@ -2923,27 +2911,27 @@ static void eth_port_read_smi_reg(unsigned int port_num,
spin_lock_irqsave(&mv643xx_eth_phy_lock, flags);
/* wait for the SMI register to become available */
- for (i = 0; mv_read(SMI_REG) & ETH_SMI_BUSY; i++) {
+ for (i = 0; rdl(mp, SMI_REG) & ETH_SMI_BUSY; i++) {
if (i == PHY_WAIT_ITERATIONS) {
- printk("mv643xx PHY busy timeout, port %d\n", port_num);
+ printk("%s: PHY busy timeout\n", mp->dev->name);
goto out;
}
udelay(PHY_WAIT_MICRO_SECONDS);
}
- mv_write(SMI_REG,
+ wrl(mp, SMI_REG,
(phy_addr << 16) | (phy_reg << 21) | ETH_SMI_OPCODE_READ);
/* now wait for the data to be valid */
- for (i = 0; !(mv_read(SMI_REG) & ETH_SMI_READ_VALID); i++) {
+ for (i = 0; !(rdl(mp, SMI_REG) & ETH_SMI_READ_VALID); i++) {
if (i == PHY_WAIT_ITERATIONS) {
- printk("mv643xx PHY read timeout, port %d\n", port_num);
+ printk("%s: PHY read timeout\n", mp->dev->name);
goto out;
}
udelay(PHY_WAIT_MICRO_SECONDS);
}
- *value = mv_read(SMI_REG) & 0xffff;
+ *value = rdl(mp, SMI_REG) & 0xffff;
out:
spin_unlock_irqrestore(&mv643xx_eth_phy_lock, flags);
}
@@ -2956,7 +2944,7 @@ out:
* order to perform writes to PHY registers.
*
* INPUT:
- * unsigned int eth_port_num Ethernet Port number.
+ * struct mv643xx_private *mp Ethernet Port.
* unsigned int phy_reg PHY register address offset.
* unsigned int value Register value.
*
@@ -2968,29 +2956,28 @@ out:
* true otherwise.
*
*/
-static void eth_port_write_smi_reg(unsigned int eth_port_num,
+static void eth_port_write_smi_reg(struct mv643xx_private *mp,
unsigned int phy_reg, unsigned int value)
{
int phy_addr;
int i;
unsigned long flags;
- phy_addr = ethernet_phy_get(eth_port_num);
+ phy_addr = ethernet_phy_get(mp);
/* the SMI register is a shared resource */
spin_lock_irqsave(&mv643xx_eth_phy_lock, flags);
/* wait for the SMI register to become available */
- for (i = 0; mv_read(SMI_REG) & ETH_SMI_BUSY; i++) {
+ for (i = 0; rdl(mp, SMI_REG) & ETH_SMI_BUSY; i++) {
if (i == PHY_WAIT_ITERATIONS) {
- printk("mv643xx PHY busy timeout, port %d\n",
- eth_port_num);
+ printk("%s: PHY busy timeout\n", mp->dev->name);
goto out;
}
udelay(PHY_WAIT_MICRO_SECONDS);
}
- mv_write(SMI_REG, (phy_addr << 16) | (phy_reg << 21) |
+ wrl(mp, SMI_REG, (phy_addr << 16) | (phy_reg << 21) |
ETH_SMI_OPCODE_WRITE | (value & 0xffff));
out:
spin_unlock_irqrestore(&mv643xx_eth_phy_lock, flags);
@@ -3001,17 +2988,17 @@ out:
*/
static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location)
{
- int val;
struct mv643xx_private *mp = netdev_priv(dev);
+ int val;
- eth_port_read_smi_reg(mp->port_num, location, &val);
+ eth_port_read_smi_reg(mp, location, &val);
return val;
}
static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val)
{
struct mv643xx_private *mp = netdev_priv(dev);
- eth_port_write_smi_reg(mp->port_num, location, val);
+ eth_port_write_smi_reg(mp, location, val);
}
/*
@@ -3156,7 +3143,7 @@ struct mv643xx_stats {
int stat_offset;
};
-#define MV643XX_STAT(m) sizeof(((struct mv643xx_private *)0)->m), \
+#define MV643XX_STAT(m) FIELD_SIZEOF(struct mv643xx_private, m), \
offsetof(struct mv643xx_private, m)
static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 385f69c1438712d60ddc57acc4a01356bed54b81..46119bb3770a65b19e1dc21c5301e1e2358bf879 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -511,10 +511,10 @@ enum PhyCtrl_bits {
/* Note that using only 32 bit fields simplifies conversion to big-endian
architectures. */
struct netdev_desc {
- u32 next_desc;
- s32 cmd_status;
- u32 addr;
- u32 software_use;
+ __le32 next_desc;
+ __le32 cmd_status;
+ __le32 addr;
+ __le32 software_use;
};
/* Bits in network_desc.status */
@@ -786,7 +786,8 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
struct netdev_private *np;
int i, option, irq, chip_idx = ent->driver_data;
static int find_cnt = -1;
- unsigned long iostart, iosize;
+ resource_size_t iostart;
+ unsigned long iosize;
void __iomem *ioaddr;
const int pcibar = 1; /* PCI base address register */
int prev_eedata;
@@ -946,10 +947,11 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
goto err_create_file;
if (netif_msg_drv(np)) {
- printk(KERN_INFO "natsemi %s: %s at %#08lx "
+ printk(KERN_INFO "natsemi %s: %s at %#08llx "
"(%s), %s, IRQ %d",
- dev->name, natsemi_pci_info[chip_idx].name, iostart,
- pci_name(np->pci_dev), print_mac(mac, dev->dev_addr), irq);
+ dev->name, natsemi_pci_info[chip_idx].name,
+ (unsigned long long)iostart, pci_name(np->pci_dev),
+ print_mac(mac, dev->dev_addr), irq);
if (dev->if_port == PORT_TP)
printk(", port TP.\n");
else if (np->ignore_phy)
@@ -2018,7 +2020,7 @@ static void drain_rx(struct net_device *dev)
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
np->rx_ring[i].cmd_status = 0;
- np->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */
+ np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
if (np->rx_skbuff[i]) {
pci_unmap_single(np->pci_dev,
np->rx_dma[i], buflen,
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 7f20a03623a08472ad450e0f73ee60ec92288010..8cb29f5b1038a7428f190edf7b288d66b1a46216 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -95,23 +95,6 @@
#define ADDR_IN_WINDOW1(off) \
((off > NETXEN_CRB_PCIX_HOST2) && (off < NETXEN_CRB_MAX)) ? 1 : 0
-/*
- * In netxen_nic_down(), we must wait for any pending callback requests into
- * netxen_watchdog_task() to complete; eg otherwise the watchdog_timer could be
- * reenabled right after it is deleted in netxen_nic_down(). FLUSH_SCHEDULED_WORK()
- * does this synchronization.
- *
- * Normally, schedule_work()/flush_scheduled_work() could have worked, but
- * netxen_nic_close() is invoked with kernel rtnl lock held. netif_carrier_off()
- * call in netxen_nic_close() triggers a schedule_work(&linkwatch_work), and a
- * subsequent call to flush_scheduled_work() in netxen_nic_down() would cause
- * linkwatch_event() to be executed which also attempts to acquire the rtnl
- * lock thus causing a deadlock.
- */
-
-#define SCHEDULE_WORK(tp) queue_work(netxen_workq, tp)
-#define FLUSH_SCHEDULED_WORK() flush_workqueue(netxen_workq)
-extern struct workqueue_struct *netxen_workq;
/*
* normalize a 64MB crb address to 32MB PCI window
@@ -1050,7 +1033,6 @@ void netxen_halt_pegs(struct netxen_adapter *adapter);
int netxen_rom_se(struct netxen_adapter *adapter, int addr);
/* Functions from netxen_nic_isr.c */
-int netxen_nic_link_ok(struct netxen_adapter *adapter);
void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
void netxen_initialize_adapter_hw(struct netxen_adapter *adapter);
void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c
index c81313b717bdd1352d7913a014ab90656a87496f..f487615f4063dd527a4b4ee5a18e4e7120d58419 100644
--- a/drivers/net/netxen/netxen_nic_isr.c
+++ b/drivers/net/netxen/netxen_nic_isr.c
@@ -172,6 +172,7 @@ void netxen_nic_gbe_handle_phy_intr(struct netxen_adapter *adapter)
netxen_nic_isr_other(adapter);
}
+#if 0
int netxen_nic_link_ok(struct netxen_adapter *adapter)
{
switch (adapter->ahw.board_type) {
@@ -189,6 +190,7 @@ int netxen_nic_link_ok(struct netxen_adapter *adapter)
return 0;
}
+#endif /* 0 */
void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter)
{
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index a8fb439a4d03395a024772bda25db0fa7deab718..7144c255ce54aa3b23856fb9df2f1dfe2f28d48e 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -86,7 +86,24 @@ static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
-struct workqueue_struct *netxen_workq;
+/*
+ * In netxen_nic_down(), we must wait for any pending callback requests into
+ * netxen_watchdog_task() to complete; eg otherwise the watchdog_timer could be
+ * reenabled right after it is deleted in netxen_nic_down().
+ * FLUSH_SCHEDULED_WORK() does this synchronization.
+ *
+ * Normally, schedule_work()/flush_scheduled_work() could have worked, but
+ * netxen_nic_close() is invoked with kernel rtnl lock held. netif_carrier_off()
+ * call in netxen_nic_close() triggers a schedule_work(&linkwatch_work), and a
+ * subsequent call to flush_scheduled_work() in netxen_nic_down() would cause
+ * linkwatch_event() to be executed which also attempts to acquire the rtnl
+ * lock thus causing a deadlock.
+ */
+
+static struct workqueue_struct *netxen_workq;
+#define SCHEDULE_WORK(tp) queue_work(netxen_workq, tp)
+#define FLUSH_SCHEDULED_WORK() flush_workqueue(netxen_workq)
+
static void netxen_watchdog(unsigned long);
static void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index 26aa8fe1fb2d8aca33760fe2413b1e536d605086..a316dcc8a06d5e61576c1ce4b1ba9e8073cb0d76 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -134,10 +134,10 @@ static int fifo = 0x8; /* don't change */
#define ni_disint() { outb(0, dev->base_addr + NI52_INTDIS); }
#define ni_enaint() { outb(0, dev->base_addr + NI52_INTENA); }
-#define make32(ptr16) (p->memtop + (short) (ptr16))
-#define make24(ptr32) ((unsigned long)(ptr32)) - p->base
-#define make16(ptr32) ((unsigned short) ((unsigned long)(ptr32)\
- - (unsigned long) p->memtop))
+#define make32(ptr16) ((void __iomem *)(p->memtop + (short) (ptr16)))
+#define make24(ptr32) ((char __iomem *)(ptr32)) - p->base
+#define make16(ptr32) ((unsigned short) ((char __iomem *)(ptr32)\
+ - p->memtop))
/******************* how to calculate the buffers *****************************
@@ -179,34 +179,35 @@ static void ni52_timeout(struct net_device *dev);
/* helper-functions */
static int init586(struct net_device *dev);
-static int check586(struct net_device *dev, char *where, unsigned size);
+static int check586(struct net_device *dev, unsigned size);
static void alloc586(struct net_device *dev);
static void startrecv586(struct net_device *dev);
-static void *alloc_rfa(struct net_device *dev, void *ptr);
+static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr);
static void ni52_rcv_int(struct net_device *dev);
static void ni52_xmt_int(struct net_device *dev);
static void ni52_rnr_int(struct net_device *dev);
struct priv {
struct net_device_stats stats;
- unsigned long base;
- char *memtop;
+ char __iomem *base;
+ char __iomem *mapped;
+ char __iomem *memtop;
spinlock_t spinlock;
int reset;
- struct rfd_struct *rfd_last, *rfd_top, *rfd_first;
- struct scp_struct *scp;
- struct iscp_struct *iscp;
- struct scb_struct *scb;
- struct tbd_struct *xmit_buffs[NUM_XMIT_BUFFS];
+ struct rfd_struct __iomem *rfd_last, *rfd_top, *rfd_first;
+ struct scp_struct __iomem *scp;
+ struct iscp_struct __iomem *iscp;
+ struct scb_struct __iomem *scb;
+ struct tbd_struct __iomem *xmit_buffs[NUM_XMIT_BUFFS];
#if (NUM_XMIT_BUFFS == 1)
- struct transmit_cmd_struct *xmit_cmds[2];
- struct nop_cmd_struct *nop_cmds[2];
+ struct transmit_cmd_struct __iomem *xmit_cmds[2];
+ struct nop_cmd_struct __iomem *nop_cmds[2];
#else
- struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS];
- struct nop_cmd_struct *nop_cmds[NUM_XMIT_BUFFS];
+ struct transmit_cmd_struct __iomem *xmit_cmds[NUM_XMIT_BUFFS];
+ struct nop_cmd_struct __iomem *nop_cmds[NUM_XMIT_BUFFS];
#endif
int nop_point, num_recv_buffs;
- char *xmit_cbuffs[NUM_XMIT_BUFFS];
+ char __iomem *xmit_cbuffs[NUM_XMIT_BUFFS];
int xmit_count, xmit_last;
};
@@ -240,7 +241,8 @@ static void wait_for_scb_cmd_ruc(struct net_device *dev)
udelay(4);
if (i == 16383) {
printk(KERN_ERR "%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",
- dev->name, p->scb->cmd_ruc, p->scb->rus);
+ dev->name, readb(&p->scb->cmd_ruc),
+ readb(&p->scb->rus));
if (!p->reset) {
p->reset = 1;
ni_reset586();
@@ -249,9 +251,9 @@ static void wait_for_scb_cmd_ruc(struct net_device *dev)
}
}
-static void wait_for_stat_compl(void *p)
+static void wait_for_stat_compl(void __iomem *p)
{
- struct nop_cmd_struct *addr = p;
+ struct nop_cmd_struct __iomem *addr = p;
int i;
for (i = 0; i < 32767; i++) {
if (readw(&((addr)->cmd_status)) & STAT_COMPL)
@@ -293,47 +295,58 @@ static int ni52_open(struct net_device *dev)
return 0; /* most done by init */
}
+static int check_iscp(struct net_device *dev, void __iomem *addr)
+{
+ struct iscp_struct __iomem *iscp = addr;
+ struct priv *p = dev->priv;
+ memset_io(iscp, 0, sizeof(struct iscp_struct));
+
+ writel(make24(iscp), &p->scp->iscp);
+ writeb(1, &iscp->busy);
+
+ ni_reset586();
+ ni_attn586();
+ mdelay(32); /* wait a while... */
+ /* i82586 clears 'busy' after successful init */
+ if (readb(&iscp->busy))
+ return 0;
+ return 1;
+}
+
/**********************************************
* Check to see if there's an 82586 out there.
*/
-static int check586(struct net_device *dev, char *where, unsigned size)
+static int check586(struct net_device *dev, unsigned size)
{
- struct priv pb;
- struct priv *p = /* (struct priv *) dev->priv*/ &pb;
- char *iscp_addrs[2];
+ struct priv *p = dev->priv;
int i;
- p->base = (unsigned long) isa_bus_to_virt((unsigned long)where)
- + size - 0x01000000;
- p->memtop = isa_bus_to_virt((unsigned long)where) + size;
- p->scp = (struct scp_struct *)(p->base + SCP_DEFAULT_ADDRESS);
- memset_io((char *)p->scp, 0, sizeof(struct scp_struct));
+ p->mapped = ioremap(dev->mem_start, size);
+ if (!p->mapped)
+ return 0;
+
+ p->base = p->mapped + size - 0x01000000;
+ p->memtop = p->mapped + size;
+ p->scp = (struct scp_struct __iomem *)(p->base + SCP_DEFAULT_ADDRESS);
+ p->scb = (struct scb_struct __iomem *) p->mapped;
+ p->iscp = (struct iscp_struct __iomem *)p->scp - 1;
+ memset_io(p->scp, 0, sizeof(struct scp_struct));
for (i = 0; i < sizeof(struct scp_struct); i++)
/* memory was writeable? */
- if (readb((char *)p->scp + i))
- return 0;
+ if (readb((char __iomem *)p->scp + i))
+ goto Enodev;
writeb(SYSBUSVAL, &p->scp->sysbus); /* 1 = 8Bit-Bus, 0 = 16 Bit */
if (readb(&p->scp->sysbus) != SYSBUSVAL)
- return 0;
-
- iscp_addrs[0] = isa_bus_to_virt((unsigned long)where);
- iscp_addrs[1] = (char *) p->scp - sizeof(struct iscp_struct);
+ goto Enodev;
- for (i = 0; i < 2; i++) {
- p->iscp = (struct iscp_struct *) iscp_addrs[i];
- memset_io((char *)p->iscp, 0, sizeof(struct iscp_struct));
-
- writel(make24(p->iscp), &p->scp->iscp);
- writeb(1, &p->iscp->busy);
-
- ni_reset586();
- ni_attn586();
- mdelay(32); /* wait a while... */
- /* i82586 clears 'busy' after successful init */
- if (readb(&p->iscp->busy))
- return 0;
- }
+ if (!check_iscp(dev, p->mapped))
+ goto Enodev;
+ if (!check_iscp(dev, p->iscp))
+ goto Enodev;
return 1;
+Enodev:
+ iounmap(p->mapped);
+ return 0;
}
/******************************************************************
@@ -346,13 +359,6 @@ static void alloc586(struct net_device *dev)
ni_reset586();
mdelay(32);
- spin_lock_init(&p->spinlock);
-
- p->scp = (struct scp_struct *) (p->base + SCP_DEFAULT_ADDRESS);
- p->scb = (struct scb_struct *) isa_bus_to_virt(dev->mem_start);
- p->iscp = (struct iscp_struct *)
- ((char *)p->scp - sizeof(struct iscp_struct));
-
memset_io(p->iscp, 0, sizeof(struct iscp_struct));
memset_io(p->scp , 0, sizeof(struct scp_struct));
@@ -371,7 +377,7 @@ static void alloc586(struct net_device *dev)
p->reset = 0;
- memset_io((char *)p->scb, 0, sizeof(struct scb_struct));
+ memset_io(p->scb, 0, sizeof(struct scb_struct));
}
/* set: io,irq,memstart,memend or set it when calling insmod */
@@ -387,12 +393,15 @@ struct net_device * __init ni52_probe(int unit)
{
struct net_device *dev = alloc_etherdev(sizeof(struct priv));
static int ports[] = {0x300, 0x280, 0x360 , 0x320 , 0x340, 0};
+ struct priv *p;
int *port;
int err = 0;
if (!dev)
return ERR_PTR(-ENOMEM);
+ p = dev->priv;
+
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
@@ -427,6 +436,7 @@ got_it:
goto out1;
return dev;
out1:
+ iounmap(p->mapped);
release_region(dev->base_addr, NI52_TOTAL_SIZE);
out:
free_netdev(dev);
@@ -436,12 +446,15 @@ out:
static int __init ni52_probe1(struct net_device *dev, int ioaddr)
{
int i, size, retval;
+ struct priv *priv = dev->priv;
dev->base_addr = ioaddr;
dev->irq = irq;
dev->mem_start = memstart;
dev->mem_end = memend;
+ spin_lock_init(&priv->spinlock);
+
if (!request_region(ioaddr, NI52_TOTAL_SIZE, DRV_NAME))
return -EBUSY;
@@ -474,7 +487,7 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr)
retval = -ENODEV;
goto out;
}
- if (!check586(dev, (char *)dev->mem_start, size)) {
+ if (!check586(dev, size)) {
printk(KERN_ERR "?memcheck, Can't find memory at 0x%lx with size %d!\n", dev->mem_start, size);
retval = -ENODEV;
goto out;
@@ -483,9 +496,9 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr)
if (dev->mem_start != 0) {
/* no auto-mem-probe */
size = 0x4000; /* check for 16K mem */
- if (!check586(dev, (char *) dev->mem_start, size)) {
+ if (!check586(dev, size)) {
size = 0x2000; /* check for 8K mem */
- if (!check586(dev, (char *)dev->mem_start, size)) {
+ if (!check586(dev, size)) {
printk(KERN_ERR "?memprobe, Can't find memory at 0x%lx!\n", dev->mem_start);
retval = -ENODEV;
goto out;
@@ -504,11 +517,11 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr)
}
dev->mem_start = memaddrs[i];
size = 0x2000; /* check for 8K mem */
- if (check586(dev, (char *)dev->mem_start, size))
+ if (check586(dev, size))
/* 8K-check */
break;
size = 0x4000; /* check for 16K mem */
- if (check586(dev, (char *)dev->mem_start, size))
+ if (check586(dev, size))
/* 16K-check */
break;
}
@@ -517,19 +530,13 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr)
dev->mem_end = dev->mem_start + size;
#endif
- memset((char *)dev->priv, 0, sizeof(struct priv));
-
- ((struct priv *)(dev->priv))->memtop =
- isa_bus_to_virt(dev->mem_start) + size;
- ((struct priv *)(dev->priv))->base = (unsigned long)
- isa_bus_to_virt(dev->mem_start) + size - 0x01000000;
alloc586(dev);
/* set number of receive-buffs according to memsize */
if (size == 0x2000)
- ((struct priv *) dev->priv)->num_recv_buffs = NUM_RECV_BUFFS_8;
+ priv->num_recv_buffs = NUM_RECV_BUFFS_8;
else
- ((struct priv *) dev->priv)->num_recv_buffs = NUM_RECV_BUFFS_16;
+ priv->num_recv_buffs = NUM_RECV_BUFFS_16;
printk(KERN_DEBUG "Memaddr: 0x%lx, Memsize: %d, ",
dev->mem_start, size);
@@ -546,6 +553,7 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr)
if (!dev->irq) {
printk("?autoirq, Failed to detect IRQ line!\n");
retval = -EAGAIN;
+ iounmap(priv->mapped);
goto out;
}
printk("IRQ %d (autodetected).\n", dev->irq);
@@ -578,19 +586,19 @@ out:
static int init586(struct net_device *dev)
{
- void *ptr;
+ void __iomem *ptr;
int i, result = 0;
struct priv *p = (struct priv *)dev->priv;
- struct configure_cmd_struct *cfg_cmd;
- struct iasetup_cmd_struct *ias_cmd;
- struct tdr_cmd_struct *tdr_cmd;
- struct mcsetup_cmd_struct *mc_cmd;
+ struct configure_cmd_struct __iomem *cfg_cmd;
+ struct iasetup_cmd_struct __iomem *ias_cmd;
+ struct tdr_cmd_struct __iomem *tdr_cmd;
+ struct mcsetup_cmd_struct __iomem *mc_cmd;
struct dev_mc_list *dmi = dev->mc_list;
int num_addrs = dev->mc_count;
- ptr = (void *) ((char *)p->scb + sizeof(struct scb_struct));
+ ptr = p->scb + 1;
- cfg_cmd = (struct configure_cmd_struct *)ptr; /* configure-command */
+ cfg_cmd = ptr; /* configure-command */
writew(0, &cfg_cmd->cmd_status);
writew(CMD_CONFIGURE | CMD_LAST, &cfg_cmd->cmd_cmd);
writew(0xFFFF, &cfg_cmd->cmd_link);
@@ -609,7 +617,7 @@ static int init586(struct net_device *dev)
writeb(0xf2, &cfg_cmd->time_high);
writeb(0x00, &cfg_cmd->promisc);;
if (dev->flags & IFF_ALLMULTI) {
- int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
+ int len = ((char __iomem *)p->iscp - (char __iomem *)ptr - 8) / 6;
if (num_addrs > len) {
printk(KERN_ERR "%s: switching to promisc. mode\n",
dev->name);
@@ -620,7 +628,7 @@ static int init586(struct net_device *dev)
writeb(0x01, &cfg_cmd->promisc);
writeb(0x00, &cfg_cmd->carr_coll);
writew(make16(cfg_cmd), &p->scb->cbl_offset);
- writew(0, &p->scb->cmd_ruc);
+ writeb(0, &p->scb->cmd_ruc);
writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
ni_attn586();
@@ -638,13 +646,13 @@ static int init586(struct net_device *dev)
* individual address setup
*/
- ias_cmd = (struct iasetup_cmd_struct *)ptr;
+ ias_cmd = ptr;
writew(0, &ias_cmd->cmd_status);
writew(CMD_IASETUP | CMD_LAST, &ias_cmd->cmd_cmd);
writew(0xffff, &ias_cmd->cmd_link);
- memcpy_toio((char *)&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN);
+ memcpy_toio(&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN);
writew(make16(ias_cmd), &p->scb->cbl_offset);
@@ -663,7 +671,7 @@ static int init586(struct net_device *dev)
* TDR, wire check .. e.g. no resistor e.t.c
*/
- tdr_cmd = (struct tdr_cmd_struct *)ptr;
+ tdr_cmd = ptr;
writew(0, &tdr_cmd->cmd_status);
writew(CMD_TDR | CMD_LAST, &tdr_cmd->cmd_cmd);
@@ -707,14 +715,14 @@ static int init586(struct net_device *dev)
* Multicast setup
*/
if (num_addrs && !(dev->flags & IFF_PROMISC)) {
- mc_cmd = (struct mcsetup_cmd_struct *) ptr;
+ mc_cmd = ptr;
writew(0, &mc_cmd->cmd_status);
writew(CMD_MCSETUP | CMD_LAST, &mc_cmd->cmd_cmd);
writew(0xffff, &mc_cmd->cmd_link);
writew(num_addrs * 6, &mc_cmd->mc_cnt);
for (i = 0; i < num_addrs; i++, dmi = dmi->next)
- memcpy_toio((char *) mc_cmd->mc_list[i],
+ memcpy_toio(mc_cmd->mc_list[i],
dmi->dmi_addr, 6);
writew(make16(mc_cmd), &p->scb->cbl_offset);
@@ -733,43 +741,43 @@ static int init586(struct net_device *dev)
*/
#if (NUM_XMIT_BUFFS == 1)
for (i = 0; i < 2; i++) {
- p->nop_cmds[i] = (struct nop_cmd_struct *)ptr;
+ p->nop_cmds[i] = ptr;
writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
writew(0, &p->nop_cmds[i]->cmd_status);
writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
- ptr = (char *) ptr + sizeof(struct nop_cmd_struct);
+ ptr = ptr + sizeof(struct nop_cmd_struct);
}
#else
for (i = 0; i < NUM_XMIT_BUFFS; i++) {
- p->nop_cmds[i] = (struct nop_cmd_struct *)ptr;
+ p->nop_cmds[i] = ptr;
writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
writew(0, &p->nop_cmds[i]->cmd_status);
writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
- ptr = (char *) ptr + sizeof(struct nop_cmd_struct);
+ ptr = ptr + sizeof(struct nop_cmd_struct);
}
#endif
- ptr = alloc_rfa(dev, (void *)ptr); /* init receive-frame-area */
+ ptr = alloc_rfa(dev, ptr); /* init receive-frame-area */
/*
* alloc xmit-buffs / init xmit_cmds
*/
for (i = 0; i < NUM_XMIT_BUFFS; i++) {
/* Transmit cmd/buff 0 */
- p->xmit_cmds[i] = (struct transmit_cmd_struct *)ptr;
- ptr = (char *) ptr + sizeof(struct transmit_cmd_struct);
- p->xmit_cbuffs[i] = (char *)ptr; /* char-buffs */
- ptr = (char *) ptr + XMIT_BUFF_SIZE;
- p->xmit_buffs[i] = (struct tbd_struct *)ptr; /* TBD */
- ptr = (char *) ptr + sizeof(struct tbd_struct);
- if ((void *)ptr > (void *)p->iscp) {
+ p->xmit_cmds[i] = ptr;
+ ptr = ptr + sizeof(struct transmit_cmd_struct);
+ p->xmit_cbuffs[i] = ptr; /* char-buffs */
+ ptr = ptr + XMIT_BUFF_SIZE;
+ p->xmit_buffs[i] = ptr; /* TBD */
+ ptr = ptr + sizeof(struct tbd_struct);
+ if ((void __iomem *)ptr > (void __iomem *)p->iscp) {
printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n",
dev->name);
return 1;
}
- memset_io((char *)(p->xmit_cmds[i]), 0,
+ memset_io(p->xmit_cmds[i], 0,
sizeof(struct transmit_cmd_struct));
- memset_io((char *)(p->xmit_buffs[i]), 0,
+ memset_io(p->xmit_buffs[i], 0,
sizeof(struct tbd_struct));
writew(make16(p->nop_cmds[(i+1)%NUM_XMIT_BUFFS]),
&p->xmit_cmds[i]->cmd_link);
@@ -816,14 +824,14 @@ static int init586(struct net_device *dev)
* It sets up the Receive Frame Area (RFA).
*/
-static void *alloc_rfa(struct net_device *dev, void *ptr)
+static void __iomem *alloc_rfa(struct net_device *dev, void __iomem *ptr)
{
- struct rfd_struct *rfd = (struct rfd_struct *)ptr;
- struct rbd_struct *rbd;
+ struct rfd_struct __iomem *rfd = ptr;
+ struct rbd_struct __iomem *rbd;
int i;
struct priv *p = (struct priv *) dev->priv;
- memset_io((char *) rfd, 0,
+ memset_io(rfd, 0,
sizeof(struct rfd_struct) * (p->num_recv_buffs + rfdadd));
p->rfd_first = rfd;
@@ -835,20 +843,19 @@ static void *alloc_rfa(struct net_device *dev, void *ptr)
/* RU suspend */
writeb(RFD_SUSP, &rfd[p->num_recv_buffs-1+rfdadd].last);
- ptr = (void *) (rfd + (p->num_recv_buffs + rfdadd));
+ ptr = rfd + (p->num_recv_buffs + rfdadd);
- rbd = (struct rbd_struct *) ptr;
- ptr = (void *) (rbd + p->num_recv_buffs);
+ rbd = ptr;
+ ptr = rbd + p->num_recv_buffs;
/* clr descriptors */
- memset_io((char *)rbd, 0,
- sizeof(struct rbd_struct) * (p->num_recv_buffs));
+ memset_io(rbd, 0, sizeof(struct rbd_struct) * (p->num_recv_buffs));
for (i = 0; i < p->num_recv_buffs; i++) {
writew(make16(rbd + (i+1) % p->num_recv_buffs), &rbd[i].next);
writew(RECV_BUFF_SIZE, &rbd[i].size);
writel(make24(ptr), &rbd[i].buffer);
- ptr = (char *) ptr + RECV_BUFF_SIZE;
+ ptr = ptr + RECV_BUFF_SIZE;
}
p->rfd_top = p->rfd_first;
p->rfd_last = p->rfd_first + (p->num_recv_buffs - 1 + rfdadd);
@@ -892,7 +899,7 @@ static irqreturn_t ni52_interrupt(int irq, void *dev_id)
if (readb(&p->scb->rus) & RU_SUSPEND) {
/* special case: RU_SUSPEND */
wait_for_scb_cmd(dev);
- p->scb->cmd_ruc = RUC_RESUME;
+ writeb(RUC_RESUME, &p->scb->cmd_ruc);
ni_attn586();
wait_for_scb_cmd_ruc(dev);
} else {
@@ -919,7 +926,7 @@ static irqreturn_t ni52_interrupt(int irq, void *dev_id)
/* Wait for ack. (ni52_xmt_int can be faster than ack!!) */
wait_for_scb_cmd(dev);
- if (p->scb->cmd_cuc) { /* timed out? */
+ if (readb(&p->scb->cmd_cuc)) { /* timed out? */
printk(KERN_ERR "%s: Acknowledge timed out.\n",
dev->name);
ni_disint();
@@ -942,14 +949,14 @@ static void ni52_rcv_int(struct net_device *dev)
int status, cnt = 0;
unsigned short totlen;
struct sk_buff *skb;
- struct rbd_struct *rbd;
+ struct rbd_struct __iomem *rbd;
struct priv *p = (struct priv *)dev->priv;
if (debuglevel > 0)
printk("R");
for (; (status = readb(&p->rfd_top->stat_high)) & RFD_COMPL;) {
- rbd = (struct rbd_struct *) make32(p->rfd_top->rbd_offset);
+ rbd = make32(readw(&p->rfd_top->rbd_offset));
if (status & RFD_OK) { /* frame received without error? */
totlen = readw(&rbd->status);
if (totlen & RBD_LAST) {
@@ -960,7 +967,7 @@ static void ni52_rcv_int(struct net_device *dev)
if (skb != NULL) {
skb_reserve(skb, 2);
skb_put(skb, totlen);
- skb_copy_to_linear_data(skb, (char *)p->base + (unsigned long) rbd->buffer, totlen);
+ memcpy_fromio(skb->data, p->base + readl(&rbd->buffer), totlen);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
@@ -979,7 +986,7 @@ static void ni52_rcv_int(struct net_device *dev)
break;
}
writew(0, &rbd->status);
- rbd = (struct rbd_struct *) make32(readl(&rbd->next));
+ rbd = make32(readw(&rbd->next));
}
totlen += rstat & RBD_MASK;
writew(0, &rbd->status);
@@ -997,7 +1004,7 @@ static void ni52_rcv_int(struct net_device *dev)
writew(0xffff, &p->rfd_top->rbd_offset);
writeb(0, &p->rfd_last->last); /* delete RFD_SUSP */
p->rfd_last = p->rfd_top;
- p->rfd_top = (struct rfd_struct *) make32(p->rfd_top->next); /* step to next RFD */
+ p->rfd_top = make32(readw(&p->rfd_top->next)); /* step to next RFD */
writew(make16(p->rfd_top), &p->scb->rfa_offset);
if (debuglevel > 0)
@@ -1042,11 +1049,12 @@ static void ni52_rnr_int(struct net_device *dev)
ni_attn586();
wait_for_scb_cmd_ruc(dev); /* wait for accept cmd. */
- alloc_rfa(dev, (char *)p->rfd_first);
+ alloc_rfa(dev, p->rfd_first);
/* maybe add a check here, before restarting the RU */
startrecv586(dev); /* restart RU */
- printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->rus);
+ printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n",
+ dev->name, readb(&p->scb->rus));
}
@@ -1178,12 +1186,11 @@ static int ni52_send_packet(struct sk_buff *skb, struct net_device *dev)
netif_stop_queue(dev);
- skb_copy_from_linear_data(skb, (char *)p->xmit_cbuffs[p->xmit_count],
- skb->len);
+ memcpy_toio(p->xmit_cbuffs[p->xmit_count], skb->data, skb->len);
len = skb->len;
if (len < ETH_ZLEN) {
len = ETH_ZLEN;
- memset((char *)p->xmit_cbuffs[p->xmit_count]+skb->len, 0,
+ memset_io(p->xmit_cbuffs[p->xmit_count]+skb->len, 0,
len - skb->len);
}
@@ -1191,14 +1198,14 @@ static int ni52_send_packet(struct sk_buff *skb, struct net_device *dev)
# ifdef NO_NOPCOMMANDS
#ifdef DEBUG
- if (p->scb->cus & CU_ACTIVE) {
+ if (readb(&p->scb->cus) & CU_ACTIVE) {
printk(KERN_ERR "%s: Hmmm .. CU is still running and we wanna send a new packet.\n", dev->name);
printk(KERN_ERR "%s: stat: %04x %04x\n",
dev->name, readb(&p->scb->cus),
readw(&p->xmit_cmds[0]->cmd_status));
}
#endif
- writew(TBD_LAST | len, &p->xmit_buffs[0]->size);;
+ writew(TBD_LAST | len, &p->xmit_buffs[0]->size);
for (i = 0; i < 16; i++) {
writew(0, &p->xmit_cmds[0]->cmd_status);
wait_for_scb_cmd(dev);
@@ -1330,7 +1337,9 @@ int __init init_module(void)
void __exit cleanup_module(void)
{
+ struct priv *p = dev_ni52->priv;
unregister_netdev(dev_ni52);
+ iounmap(p->mapped);
release_region(dev_ni52->base_addr, NI52_TOTAL_SIZE);
free_netdev(dev_ni52);
}
diff --git a/drivers/net/ni52.h b/drivers/net/ni52.h
index 1f28a4d1a31926cd04cb93357fb4826c2b28da24..0a03b28833279ee61af337a60ef439bd6c93475d 100644
--- a/drivers/net/ni52.h
+++ b/drivers/net/ni52.h
@@ -39,8 +39,8 @@ struct scp_struct
u16 zero_dum0; /* has to be zero */
u8 sysbus; /* 0=16Bit,1=8Bit */
u8 zero_dum1; /* has to be zero for 586 */
- u8 zero_dum2;
- u8 zero_dum3;
+ u16 zero_dum2;
+ u16 zero_dum3;
u32 iscp; /* pointer to the iscp-block */
};
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d11ba61baa4f1611a3de3afdf6513ca7b29ad10f..7565c2d7f30e9ce956d3e0a5c6009e1da9fb2038 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -113,6 +113,8 @@ do { if ((np)->msg_enable & NETIF_MSG_##TYPE) \
#define niu_unlock_parent(np, flags) \
spin_unlock_irqrestore(&np->parent->lock, flags)
+static int serdes_init_10g_serdes(struct niu *np);
+
static int __niu_wait_bits_clear_mac(struct niu *np, unsigned long reg,
u64 bits, int limit, int delay)
{
@@ -706,6 +708,251 @@ static int serdes_init_1g(struct niu *np)
return 0;
}
+static int serdes_init_1g_serdes(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ unsigned long ctrl_reg, test_cfg_reg, pll_cfg, i;
+ u64 ctrl_val, test_cfg_val, sig, mask, val;
+ int err;
+ u64 reset_val, val_rd;
+
+ val = ENET_SERDES_PLL_HRATE0 | ENET_SERDES_PLL_HRATE1 |
+ ENET_SERDES_PLL_HRATE2 | ENET_SERDES_PLL_HRATE3 |
+ ENET_SERDES_PLL_FBDIV0;
+ switch (np->port) {
+ case 0:
+ reset_val = ENET_SERDES_RESET_0;
+ ctrl_reg = ENET_SERDES_0_CTRL_CFG;
+ test_cfg_reg = ENET_SERDES_0_TEST_CFG;
+ pll_cfg = ENET_SERDES_0_PLL_CFG;
+ break;
+ case 1:
+ reset_val = ENET_SERDES_RESET_1;
+ ctrl_reg = ENET_SERDES_1_CTRL_CFG;
+ test_cfg_reg = ENET_SERDES_1_TEST_CFG;
+ pll_cfg = ENET_SERDES_1_PLL_CFG;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ ctrl_val = (ENET_SERDES_CTRL_SDET_0 |
+ ENET_SERDES_CTRL_SDET_1 |
+ ENET_SERDES_CTRL_SDET_2 |
+ ENET_SERDES_CTRL_SDET_3 |
+ (0x5 << ENET_SERDES_CTRL_EMPH_0_SHIFT) |
+ (0x5 << ENET_SERDES_CTRL_EMPH_1_SHIFT) |
+ (0x5 << ENET_SERDES_CTRL_EMPH_2_SHIFT) |
+ (0x5 << ENET_SERDES_CTRL_EMPH_3_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_0_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_1_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_2_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_3_SHIFT));
+ test_cfg_val = 0;
+
+ if (lp->loopback_mode == LOOPBACK_PHY) {
+ test_cfg_val |= ((ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_0_SHIFT) |
+ (ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_1_SHIFT) |
+ (ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_2_SHIFT) |
+ (ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_3_SHIFT));
+ }
+
+ nw64(ENET_SERDES_RESET, reset_val);
+ mdelay(20);
+ val_rd = nr64(ENET_SERDES_RESET);
+ val_rd &= ~reset_val;
+ nw64(pll_cfg, val);
+ nw64(ctrl_reg, ctrl_val);
+ nw64(test_cfg_reg, test_cfg_val);
+ nw64(ENET_SERDES_RESET, val_rd);
+ mdelay(2000);
+
+ /* Initialize all 4 lanes of the SERDES. */
+ for (i = 0; i < 4; i++) {
+ u32 rxtx_ctrl, glue0;
+
+ err = esr_read_rxtx_ctrl(np, i, &rxtx_ctrl);
+ if (err)
+ return err;
+ err = esr_read_glue0(np, i, &glue0);
+ if (err)
+ return err;
+
+ rxtx_ctrl &= ~(ESR_RXTX_CTRL_VMUXLO);
+ rxtx_ctrl |= (ESR_RXTX_CTRL_ENSTRETCH |
+ (2 << ESR_RXTX_CTRL_VMUXLO_SHIFT));
+
+ glue0 &= ~(ESR_GLUE_CTRL0_SRATE |
+ ESR_GLUE_CTRL0_THCNT |
+ ESR_GLUE_CTRL0_BLTIME);
+ glue0 |= (ESR_GLUE_CTRL0_RXLOSENAB |
+ (0xf << ESR_GLUE_CTRL0_SRATE_SHIFT) |
+ (0xff << ESR_GLUE_CTRL0_THCNT_SHIFT) |
+ (BLTIME_300_CYCLES <<
+ ESR_GLUE_CTRL0_BLTIME_SHIFT));
+
+ err = esr_write_rxtx_ctrl(np, i, rxtx_ctrl);
+ if (err)
+ return err;
+ err = esr_write_glue0(np, i, glue0);
+ if (err)
+ return err;
+ }
+
+
+ sig = nr64(ESR_INT_SIGNALS);
+ switch (np->port) {
+ case 0:
+ val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+ mask = val;
+ break;
+
+ case 1:
+ val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+ mask = val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if ((sig & mask) != val) {
+ dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+ "[%08x]\n", np->port, (int) (sig & mask), (int) val);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int link_status_1g_serdes(struct niu *np, int *link_up_p)
+{
+ struct niu_link_config *lp = &np->link_config;
+ int link_up;
+ u64 val;
+ u16 current_speed;
+ unsigned long flags;
+ u8 current_duplex;
+
+ link_up = 0;
+ current_speed = SPEED_INVALID;
+ current_duplex = DUPLEX_INVALID;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ val = nr64_pcs(PCS_MII_STAT);
+
+ if (val & PCS_MII_STAT_LINK_STATUS) {
+ link_up = 1;
+ current_speed = SPEED_1000;
+ current_duplex = DUPLEX_FULL;
+ }
+
+ lp->active_speed = current_speed;
+ lp->active_duplex = current_duplex;
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ *link_up_p = link_up;
+ return 0;
+}
+
+
+static int link_status_10g_serdes(struct niu *np, int *link_up_p)
+{
+ unsigned long flags;
+ struct niu_link_config *lp = &np->link_config;
+ int link_up = 0;
+ int link_ok = 1;
+ u64 val, val2;
+ u16 current_speed;
+ u8 current_duplex;
+
+ if (!(np->flags & NIU_FLAGS_10G))
+ return link_status_1g_serdes(np, link_up_p);
+
+ current_speed = SPEED_INVALID;
+ current_duplex = DUPLEX_INVALID;
+ spin_lock_irqsave(&np->lock, flags);
+
+ val = nr64_xpcs(XPCS_STATUS(0));
+ val2 = nr64_mac(XMAC_INTER2);
+ if (val2 & 0x01000000)
+ link_ok = 0;
+
+ if ((val & 0x1000ULL) && link_ok) {
+ link_up = 1;
+ current_speed = SPEED_10000;
+ current_duplex = DUPLEX_FULL;
+ }
+ lp->active_speed = current_speed;
+ lp->active_duplex = current_duplex;
+ spin_unlock_irqrestore(&np->lock, flags);
+ *link_up_p = link_up;
+ return 0;
+}
+
+
+static int link_status_1g_rgmii(struct niu *np, int *link_up_p)
+{
+ struct niu_link_config *lp = &np->link_config;
+ u16 current_speed, bmsr;
+ unsigned long flags;
+ u8 current_duplex;
+ int err, link_up;
+
+ link_up = 0;
+ current_speed = SPEED_INVALID;
+ current_duplex = DUPLEX_INVALID;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ err = -EINVAL;
+
+ err = mii_read(np, np->phy_addr, MII_BMSR);
+ if (err < 0)
+ goto out;
+
+ bmsr = err;
+ if (bmsr & BMSR_LSTATUS) {
+ u16 adv, lpa, common, estat;
+
+ err = mii_read(np, np->phy_addr, MII_ADVERTISE);
+ if (err < 0)
+ goto out;
+ adv = err;
+
+ err = mii_read(np, np->phy_addr, MII_LPA);
+ if (err < 0)
+ goto out;
+ lpa = err;
+
+ common = adv & lpa;
+
+ err = mii_read(np, np->phy_addr, MII_ESTATUS);
+ if (err < 0)
+ goto out;
+ estat = err;
+ link_up = 1;
+ current_speed = SPEED_1000;
+ current_duplex = DUPLEX_FULL;
+
+ }
+ lp->active_speed = current_speed;
+ lp->active_duplex = current_duplex;
+ err = 0;
+
+out:
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ *link_up_p = link_up;
+ return err;
+}
+
+
static int bcm8704_reset(struct niu *np)
{
int err, limit;
@@ -1022,6 +1269,69 @@ static int mii_reset(struct niu *np)
return 0;
}
+
+
+static int xcvr_init_1g_rgmii(struct niu *np)
+{
+ int err;
+ u64 val;
+ u16 bmcr, bmsr, estat;
+
+ val = nr64(MIF_CONFIG);
+ val &= ~MIF_CONFIG_INDIRECT_MODE;
+ nw64(MIF_CONFIG, val);
+
+ err = mii_reset(np);
+ if (err)
+ return err;
+
+ err = mii_read(np, np->phy_addr, MII_BMSR);
+ if (err < 0)
+ return err;
+ bmsr = err;
+
+ estat = 0;
+ if (bmsr & BMSR_ESTATEN) {
+ err = mii_read(np, np->phy_addr, MII_ESTATUS);
+ if (err < 0)
+ return err;
+ estat = err;
+ }
+
+ bmcr = 0;
+ err = mii_write(np, np->phy_addr, MII_BMCR, bmcr);
+ if (err)
+ return err;
+
+ if (bmsr & BMSR_ESTATEN) {
+ u16 ctrl1000 = 0;
+
+ if (estat & ESTATUS_1000_TFULL)
+ ctrl1000 |= ADVERTISE_1000FULL;
+ err = mii_write(np, np->phy_addr, MII_CTRL1000, ctrl1000);
+ if (err)
+ return err;
+ }
+
+ bmcr = (BMCR_SPEED1000 | BMCR_FULLDPLX);
+
+ err = mii_write(np, np->phy_addr, MII_BMCR, bmcr);
+ if (err)
+ return err;
+
+ err = mii_read(np, np->phy_addr, MII_BMCR);
+ if (err < 0)
+ return err;
+ bmcr = mii_read(np, np->phy_addr, MII_BMCR);
+
+ err = mii_read(np, np->phy_addr, MII_BMSR);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+
static int mii_init_common(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
@@ -1429,6 +1739,16 @@ static void niu_timer(unsigned long __opaque)
add_timer(&np->timer);
}
+static const struct niu_phy_ops phy_ops_10g_serdes = {
+ .serdes_init = serdes_init_10g_serdes,
+ .link_status = link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_rgmii = {
+ .xcvr_init = xcvr_init_1g_rgmii,
+ .link_status = link_status_1g_rgmii,
+};
+
static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
.serdes_init = serdes_init_niu,
.xcvr_init = xcvr_init_10g,
@@ -1487,6 +1807,152 @@ static const struct niu_phy_template phy_template_1g_copper = {
.phy_addr_base = 0,
};
+static const struct niu_phy_template phy_template_1g_rgmii = {
+ .ops = &phy_ops_1g_rgmii,
+ .phy_addr_base = 0,
+};
+
+static const struct niu_phy_template phy_template_10g_serdes = {
+ .ops = &phy_ops_10g_serdes,
+ .phy_addr_base = 0,
+};
+
+static int niu_atca_port_num[4] = {
+ 0, 0, 11, 10
+};
+
+static int serdes_init_10g_serdes(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ unsigned long ctrl_reg, test_cfg_reg, pll_cfg, i;
+ u64 ctrl_val, test_cfg_val, sig, mask, val;
+ int err;
+ u64 reset_val;
+
+ switch (np->port) {
+ case 0:
+ reset_val = ENET_SERDES_RESET_0;
+ ctrl_reg = ENET_SERDES_0_CTRL_CFG;
+ test_cfg_reg = ENET_SERDES_0_TEST_CFG;
+ pll_cfg = ENET_SERDES_0_PLL_CFG;
+ break;
+ case 1:
+ reset_val = ENET_SERDES_RESET_1;
+ ctrl_reg = ENET_SERDES_1_CTRL_CFG;
+ test_cfg_reg = ENET_SERDES_1_TEST_CFG;
+ pll_cfg = ENET_SERDES_1_PLL_CFG;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ ctrl_val = (ENET_SERDES_CTRL_SDET_0 |
+ ENET_SERDES_CTRL_SDET_1 |
+ ENET_SERDES_CTRL_SDET_2 |
+ ENET_SERDES_CTRL_SDET_3 |
+ (0x5 << ENET_SERDES_CTRL_EMPH_0_SHIFT) |
+ (0x5 << ENET_SERDES_CTRL_EMPH_1_SHIFT) |
+ (0x5 << ENET_SERDES_CTRL_EMPH_2_SHIFT) |
+ (0x5 << ENET_SERDES_CTRL_EMPH_3_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_0_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_1_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_2_SHIFT) |
+ (0x1 << ENET_SERDES_CTRL_LADJ_3_SHIFT));
+ test_cfg_val = 0;
+
+ if (lp->loopback_mode == LOOPBACK_PHY) {
+ test_cfg_val |= ((ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_0_SHIFT) |
+ (ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_1_SHIFT) |
+ (ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_2_SHIFT) |
+ (ENET_TEST_MD_PAD_LOOPBACK <<
+ ENET_SERDES_TEST_MD_3_SHIFT));
+ }
+
+ esr_reset(np);
+ nw64(pll_cfg, ENET_SERDES_PLL_FBDIV2);
+ nw64(ctrl_reg, ctrl_val);
+ nw64(test_cfg_reg, test_cfg_val);
+
+ /* Initialize all 4 lanes of the SERDES. */
+ for (i = 0; i < 4; i++) {
+ u32 rxtx_ctrl, glue0;
+
+ err = esr_read_rxtx_ctrl(np, i, &rxtx_ctrl);
+ if (err)
+ return err;
+ err = esr_read_glue0(np, i, &glue0);
+ if (err)
+ return err;
+
+ rxtx_ctrl &= ~(ESR_RXTX_CTRL_VMUXLO);
+ rxtx_ctrl |= (ESR_RXTX_CTRL_ENSTRETCH |
+ (2 << ESR_RXTX_CTRL_VMUXLO_SHIFT));
+
+ glue0 &= ~(ESR_GLUE_CTRL0_SRATE |
+ ESR_GLUE_CTRL0_THCNT |
+ ESR_GLUE_CTRL0_BLTIME);
+ glue0 |= (ESR_GLUE_CTRL0_RXLOSENAB |
+ (0xf << ESR_GLUE_CTRL0_SRATE_SHIFT) |
+ (0xff << ESR_GLUE_CTRL0_THCNT_SHIFT) |
+ (BLTIME_300_CYCLES <<
+ ESR_GLUE_CTRL0_BLTIME_SHIFT));
+
+ err = esr_write_rxtx_ctrl(np, i, rxtx_ctrl);
+ if (err)
+ return err;
+ err = esr_write_glue0(np, i, glue0);
+ if (err)
+ return err;
+ }
+
+
+ sig = nr64(ESR_INT_SIGNALS);
+ switch (np->port) {
+ case 0:
+ mask = ESR_INT_SIGNALS_P0_BITS;
+ val = (ESR_INT_SRDY0_P0 |
+ ESR_INT_DET0_P0 |
+ ESR_INT_XSRDY_P0 |
+ ESR_INT_XDP_P0_CH3 |
+ ESR_INT_XDP_P0_CH2 |
+ ESR_INT_XDP_P0_CH1 |
+ ESR_INT_XDP_P0_CH0);
+ break;
+
+ case 1:
+ mask = ESR_INT_SIGNALS_P1_BITS;
+ val = (ESR_INT_SRDY0_P1 |
+ ESR_INT_DET0_P1 |
+ ESR_INT_XSRDY_P1 |
+ ESR_INT_XDP_P1_CH3 |
+ ESR_INT_XDP_P1_CH2 |
+ ESR_INT_XDP_P1_CH1 |
+ ESR_INT_XDP_P1_CH0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if ((sig & mask) != val) {
+ int err;
+ err = serdes_init_1g_serdes(np);
+ if (!err) {
+ np->flags &= ~NIU_FLAGS_10G;
+ np->mac_xcvr = MAC_XCVR_PCS;
+ } else {
+ dev_err(np->device, PFX "Port %u 10G/1G SERDES Link Failed \n",
+ np->port);
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
static int niu_determine_phy_disposition(struct niu *np)
{
struct niu_parent *parent = np->parent;
@@ -1498,7 +1964,10 @@ static int niu_determine_phy_disposition(struct niu *np)
tp = &phy_template_niu;
phy_addr_off += np->port;
} else {
- switch (np->flags & (NIU_FLAGS_10G | NIU_FLAGS_FIBER)) {
+ switch (np->flags &
+ (NIU_FLAGS_10G |
+ NIU_FLAGS_FIBER |
+ NIU_FLAGS_XCVR_SERDES)) {
case 0:
/* 1G copper */
tp = &phy_template_1g_copper;
@@ -1529,6 +1998,25 @@ static int niu_determine_phy_disposition(struct niu *np)
phy_addr_off += np->port;
break;
+ case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+ case NIU_FLAGS_XCVR_SERDES | NIU_FLAGS_FIBER:
+ case NIU_FLAGS_XCVR_SERDES:
+ switch(np->port) {
+ case 0:
+ case 1:
+ tp = &phy_template_10g_serdes;
+ break;
+ case 2:
+ case 3:
+ tp = &phy_template_1g_rgmii;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ phy_addr_off = niu_atca_port_num[np->port];
+ break;
+
default:
return -EINVAL;
}
@@ -4139,6 +4627,12 @@ static void niu_init_xif_xmac(struct niu *np)
struct niu_link_config *lp = &np->link_config;
u64 val;
+ if (np->flags & NIU_FLAGS_XCVR_SERDES) {
+ val = nr64(MIF_CONFIG);
+ val |= MIF_CONFIG_ATCA_GE;
+ nw64(MIF_CONFIG, val);
+ }
+
val = nr64_mac(XMAC_CONFIG);
val &= ~XMAC_CONFIG_SEL_POR_CLK_SRC;
@@ -4155,7 +4649,8 @@ static void niu_init_xif_xmac(struct niu *np)
val &= ~XMAC_CONFIG_LFS_DISABLE;
} else {
val |= XMAC_CONFIG_LFS_DISABLE;
- if (!(np->flags & NIU_FLAGS_FIBER))
+ if (!(np->flags & NIU_FLAGS_FIBER) &&
+ !(np->flags & NIU_FLAGS_XCVR_SERDES))
val |= XMAC_CONFIG_1G_PCS_BYPASS;
else
val &= ~XMAC_CONFIG_1G_PCS_BYPASS;
@@ -4224,16 +4719,26 @@ static void niu_init_xif(struct niu *np)
static void niu_pcs_mii_reset(struct niu *np)
{
+ int limit = 1000;
u64 val = nr64_pcs(PCS_MII_CTL);
val |= PCS_MII_CTL_RST;
nw64_pcs(PCS_MII_CTL, val);
+ while ((--limit >= 0) && (val & PCS_MII_CTL_RST)) {
+ udelay(100);
+ val = nr64_pcs(PCS_MII_CTL);
+ }
}
static void niu_xpcs_reset(struct niu *np)
{
+ int limit = 1000;
u64 val = nr64_xpcs(XPCS_CONTROL1);
val |= XPCS_CONTROL1_RESET;
nw64_xpcs(XPCS_CONTROL1, val);
+ while ((--limit >= 0) && (val & XPCS_CONTROL1_RESET)) {
+ udelay(100);
+ val = nr64_xpcs(XPCS_CONTROL1);
+ }
}
static int niu_init_pcs(struct niu *np)
@@ -4241,7 +4746,9 @@ static int niu_init_pcs(struct niu *np)
struct niu_link_config *lp = &np->link_config;
u64 val;
- switch (np->flags & (NIU_FLAGS_10G | NIU_FLAGS_FIBER)) {
+ switch (np->flags & (NIU_FLAGS_10G |
+ NIU_FLAGS_FIBER |
+ NIU_FLAGS_XCVR_SERDES)) {
case NIU_FLAGS_FIBER:
/* 1G fiber */
nw64_pcs(PCS_CONF, PCS_CONF_MASK | PCS_CONF_ENABLE);
@@ -4251,6 +4758,8 @@ static int niu_init_pcs(struct niu *np)
case NIU_FLAGS_10G:
case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+ case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+ /* 10G SERDES */
if (!(np->flags & NIU_FLAGS_XMAC))
return -EINVAL;
@@ -4273,8 +4782,18 @@ static int niu_init_pcs(struct niu *np)
(void) nr64_xpcs(XPCS_SYMERR_CNT23);
break;
+
+ case NIU_FLAGS_XCVR_SERDES:
+ /* 1G SERDES */
+ niu_pcs_mii_reset(np);
+ nw64_pcs(PCS_CONF, PCS_CONF_MASK | PCS_CONF_ENABLE);
+ nw64_pcs(PCS_DPATH_MODE, 0);
+ break;
+
case 0:
/* 1G copper */
+ case NIU_FLAGS_XCVR_SERDES | NIU_FLAGS_FIBER:
+ /* 1G RGMII FIBER */
nw64_pcs(PCS_DPATH_MODE, PCS_DPATH_MODE_MII);
niu_pcs_mii_reset(np);
break;
@@ -6268,7 +6787,19 @@ static void __devinit niu_pci_vpd_validate(struct niu *np)
return;
}
- if (niu_phy_type_prop_decode(np, np->vpd.phy_type)) {
+ if (!strcmp(np->vpd.model, "SUNW,CP3220") ||
+ !strcmp(np->vpd.model, "SUNW,CP3260")) {
+ np->flags |= NIU_FLAGS_10G;
+ np->flags &= ~NIU_FLAGS_FIBER;
+ np->flags |= NIU_FLAGS_XCVR_SERDES;
+ np->mac_xcvr = MAC_XCVR_PCS;
+ if (np->port > 1) {
+ np->flags |= NIU_FLAGS_FIBER;
+ np->flags &= ~NIU_FLAGS_10G;
+ }
+ if (np->flags & NIU_FLAGS_10G)
+ np->mac_xcvr = MAC_XCVR_XPCS;
+ } else if (niu_phy_type_prop_decode(np, np->vpd.phy_type)) {
dev_err(np->device, PFX "Illegal phy string [%s].\n",
np->vpd.phy_type);
dev_err(np->device, PFX "Falling back to SPROM.\n");
@@ -6731,80 +7262,93 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
u32 val;
int err;
- err = fill_phy_probe_info(np, parent, info);
- if (err)
- return err;
- num_10g = count_10g_ports(info, &lowest_10g);
- num_1g = count_1g_ports(info, &lowest_1g);
-
- switch ((num_10g << 4) | num_1g) {
- case 0x24:
- if (lowest_1g == 10)
- parent->plat_type = PLAT_TYPE_VF_P0;
- else if (lowest_1g == 26)
- parent->plat_type = PLAT_TYPE_VF_P1;
- else
- goto unknown_vg_1g_port;
-
- /* fallthru */
- case 0x22:
- val = (phy_encode(PORT_TYPE_10G, 0) |
- phy_encode(PORT_TYPE_10G, 1) |
+ if (!strcmp(np->vpd.model, "SUNW,CP3220") ||
+ !strcmp(np->vpd.model, "SUNW,CP3260")) {
+ num_10g = 0;
+ num_1g = 2;
+ parent->plat_type = PLAT_TYPE_ATCA_CP3220;
+ parent->num_ports = 4;
+ val = (phy_encode(PORT_TYPE_1G, 0) |
+ phy_encode(PORT_TYPE_1G, 1) |
phy_encode(PORT_TYPE_1G, 2) |
phy_encode(PORT_TYPE_1G, 3));
- break;
-
- case 0x20:
- val = (phy_encode(PORT_TYPE_10G, 0) |
- phy_encode(PORT_TYPE_10G, 1));
- break;
+ } else {
+ err = fill_phy_probe_info(np, parent, info);
+ if (err)
+ return err;
- case 0x10:
- val = phy_encode(PORT_TYPE_10G, np->port);
- break;
+ num_10g = count_10g_ports(info, &lowest_10g);
+ num_1g = count_1g_ports(info, &lowest_1g);
- case 0x14:
- if (lowest_1g == 10)
- parent->plat_type = PLAT_TYPE_VF_P0;
- else if (lowest_1g == 26)
- parent->plat_type = PLAT_TYPE_VF_P1;
- else
- goto unknown_vg_1g_port;
+ switch ((num_10g << 4) | num_1g) {
+ case 0x24:
+ if (lowest_1g == 10)
+ parent->plat_type = PLAT_TYPE_VF_P0;
+ else if (lowest_1g == 26)
+ parent->plat_type = PLAT_TYPE_VF_P1;
+ else
+ goto unknown_vg_1g_port;
- /* fallthru */
- case 0x13:
- if ((lowest_10g & 0x7) == 0)
+ /* fallthru */
+ case 0x22:
val = (phy_encode(PORT_TYPE_10G, 0) |
- phy_encode(PORT_TYPE_1G, 1) |
- phy_encode(PORT_TYPE_1G, 2) |
- phy_encode(PORT_TYPE_1G, 3));
- else
- val = (phy_encode(PORT_TYPE_1G, 0) |
phy_encode(PORT_TYPE_10G, 1) |
phy_encode(PORT_TYPE_1G, 2) |
phy_encode(PORT_TYPE_1G, 3));
- break;
+ break;
- case 0x04:
- if (lowest_1g == 10)
- parent->plat_type = PLAT_TYPE_VF_P0;
- else if (lowest_1g == 26)
- parent->plat_type = PLAT_TYPE_VF_P1;
- else
- goto unknown_vg_1g_port;
+ case 0x20:
+ val = (phy_encode(PORT_TYPE_10G, 0) |
+ phy_encode(PORT_TYPE_10G, 1));
+ break;
- val = (phy_encode(PORT_TYPE_1G, 0) |
- phy_encode(PORT_TYPE_1G, 1) |
- phy_encode(PORT_TYPE_1G, 2) |
- phy_encode(PORT_TYPE_1G, 3));
- break;
+ case 0x10:
+ val = phy_encode(PORT_TYPE_10G, np->port);
+ break;
- default:
- printk(KERN_ERR PFX "Unsupported port config "
- "10G[%d] 1G[%d]\n",
- num_10g, num_1g);
- return -EINVAL;
+ case 0x14:
+ if (lowest_1g == 10)
+ parent->plat_type = PLAT_TYPE_VF_P0;
+ else if (lowest_1g == 26)
+ parent->plat_type = PLAT_TYPE_VF_P1;
+ else
+ goto unknown_vg_1g_port;
+
+ /* fallthru */
+ case 0x13:
+ if ((lowest_10g & 0x7) == 0)
+ val = (phy_encode(PORT_TYPE_10G, 0) |
+ phy_encode(PORT_TYPE_1G, 1) |
+ phy_encode(PORT_TYPE_1G, 2) |
+ phy_encode(PORT_TYPE_1G, 3));
+ else
+ val = (phy_encode(PORT_TYPE_1G, 0) |
+ phy_encode(PORT_TYPE_10G, 1) |
+ phy_encode(PORT_TYPE_1G, 2) |
+ phy_encode(PORT_TYPE_1G, 3));
+ break;
+
+ case 0x04:
+ if (lowest_1g == 10)
+ parent->plat_type = PLAT_TYPE_VF_P0;
+ else if (lowest_1g == 26)
+ parent->plat_type = PLAT_TYPE_VF_P1;
+ else
+ goto unknown_vg_1g_port;
+
+ val = (phy_encode(PORT_TYPE_1G, 0) |
+ phy_encode(PORT_TYPE_1G, 1) |
+ phy_encode(PORT_TYPE_1G, 2) |
+ phy_encode(PORT_TYPE_1G, 3));
+ break;
+
+ default:
+ printk(KERN_ERR PFX "Unsupported port config "
+ "10G[%d] 1G[%d]\n",
+ num_10g, num_1g);
+ return -EINVAL;
+ }
}
parent->port_phy = val;
@@ -7599,14 +8143,25 @@ static void __devinit niu_device_announce(struct niu *np)
pr_info("%s: NIU Ethernet %s\n",
dev->name, print_mac(mac, dev->dev_addr));
- pr_info("%s: Port type[%s] mode[%s:%s] XCVR[%s] phy[%s]\n",
- dev->name,
- (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
- (np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
- (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
- (np->mac_xcvr == MAC_XCVR_MII ? "MII" :
- (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
- np->vpd.phy_type);
+ if (np->parent->plat_type == PLAT_TYPE_ATCA_CP3220) {
+ pr_info("%s: Port type[%s] mode[%s:%s] XCVR[%s] phy[%s]\n",
+ dev->name,
+ (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
+ (np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
+ (np->flags & NIU_FLAGS_FIBER ? "RGMII FIBER" : "SERDES"),
+ (np->mac_xcvr == MAC_XCVR_MII ? "MII" :
+ (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
+ np->vpd.phy_type);
+ } else {
+ pr_info("%s: Port type[%s] mode[%s:%s] XCVR[%s] phy[%s]\n",
+ dev->name,
+ (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
+ (np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
+ (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+ (np->mac_xcvr == MAC_XCVR_MII ? "MII" :
+ (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
+ np->vpd.phy_type);
+ }
}
static int __devinit niu_pci_init_one(struct pci_dev *pdev,
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 59dc05fcd37191c94b717d21f5977feff2c3ca40..336aed08b27507964394f3cca929c1c2b4112dd4 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3061,6 +3061,7 @@ struct niu_parent {
#define PLAT_TYPE_NIU 0x02
#define PLAT_TYPE_VF_P0 0x03
#define PLAT_TYPE_VF_P1 0x04
+#define PLAT_TYPE_ATCA_CP3220 0x08
u8 num_ports;
@@ -3198,10 +3199,11 @@ struct niu {
struct niu_parent *parent;
u32 flags;
+#define NIU_FLAGS_VPD_VALID 0x00800000 /* VPD has valid version */
#define NIU_FLAGS_MSIX 0x00400000 /* MSI-X in use */
#define NIU_FLAGS_MCAST 0x00200000 /* multicast filter enabled */
#define NIU_FLAGS_PROMISC 0x00100000 /* PROMISC enabled */
-#define NIU_FLAGS_VPD_VALID 0x00080000 /* VPD has valid version */
+#define NIU_FLAGS_XCVR_SERDES 0x00080000 /* 0=PHY 1=SERDES */
#define NIU_FLAGS_10G 0x00040000 /* 0=1G 1=10G */
#define NIU_FLAGS_FIBER 0x00020000 /* 0=COPPER 1=FIBER */
#define NIU_FLAGS_XMAC 0x00010000 /* 0=BMAC 1=XMAC */
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 2e39e0285d8f9d2a6a9712ce33249749ede49377..bcd7f9814ed825a6699cfe8e6b7f509218dc48ae 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -1012,7 +1012,7 @@ static int pasemi_mac_phy_init(struct net_device *dev)
goto err;
phy_id = *prop;
- snprintf(mac->phy_id, BUS_ID_SIZE, PHY_ID_FMT, (int)r.start, phy_id);
+ snprintf(mac->phy_id, BUS_ID_SIZE, "%x:%02x", (int)r.start, phy_id);
of_node_put(phy_dn);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 5b80358af65840926a1de33d4517e41396d6f835..60c5cfe969186344b4e36021c6efd0fdd468313e 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -99,6 +99,41 @@ static int bcm54xx_config_intr(struct phy_device *phydev)
return err;
}
+static int bcm5481_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Aneg firsly. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ u16 reg;
+
+ /*
+ * There is no BCM5481 specification available, so down
+ * here is everything we know about "register 0x18". This
+ * at least helps BCM5481 to successfuly receive packets
+ * on MPC8360E-RDK board. Peter Barada
+ * says: "This sets delay between the RXD and RXC signals
+ * instead of using trace lengths to achieve timing".
+ */
+
+ /* Set RDX clk delay. */
+ reg = 0x7 | (0x7 << 12);
+ phy_write(phydev, 0x18, reg);
+
+ reg = phy_read(phydev, 0x18);
+ /* Set RDX-RXC skew. */
+ reg |= (1 << 8);
+ /* Write bits 14:0. */
+ reg |= (1 << 15);
+ phy_write(phydev, 0x18, reg);
+ }
+
+ return ret;
+}
+
static struct phy_driver bcm5411_driver = {
.phy_id = 0x00206070,
.phy_id_mask = 0xfffffff0,
@@ -141,8 +176,36 @@ static struct phy_driver bcm5461_driver = {
.driver = { .owner = THIS_MODULE },
};
+static struct phy_driver bcm5464_driver = {
+ .phy_id = 0x002060b0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5464",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+};
+
+static struct phy_driver bcm5481_driver = {
+ .phy_id = 0x0143bca0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5481",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = bcm5481_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+};
+
static struct phy_driver bcm5482_driver = {
- .phy_id = 0x0143bcb0,
+ .phy_id = 0x0143bcb0,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5482",
.features = PHY_GBIT_FEATURES,
@@ -168,12 +231,22 @@ static int __init broadcom_init(void)
ret = phy_driver_register(&bcm5461_driver);
if (ret)
goto out_5461;
+ ret = phy_driver_register(&bcm5464_driver);
+ if (ret)
+ goto out_5464;
+ ret = phy_driver_register(&bcm5481_driver);
+ if (ret)
+ goto out_5481;
ret = phy_driver_register(&bcm5482_driver);
if (ret)
goto out_5482;
return ret;
out_5482:
+ phy_driver_unregister(&bcm5481_driver);
+out_5481:
+ phy_driver_unregister(&bcm5464_driver);
+out_5464:
phy_driver_unregister(&bcm5461_driver);
out_5461:
phy_driver_unregister(&bcm5421_driver);
@@ -186,6 +259,8 @@ out_5411:
static void __exit broadcom_exit(void)
{
phy_driver_unregister(&bcm5482_driver);
+ phy_driver_unregister(&bcm5481_driver);
+ phy_driver_unregister(&bcm5464_driver);
phy_driver_unregister(&bcm5461_driver);
phy_driver_unregister(&bcm5421_driver);
phy_driver_unregister(&bcm5411_driver);
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index ca9b040f9ad98015520e4b22b29e3178b12043f9..4e07956a483b60f62050cfd6c83dfaea5f6eaa9c 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -213,7 +213,7 @@ static int __init fixed_mdio_bus_init(void)
goto err_pdev;
}
- fmb->mii_bus.id = 0;
+ snprintf(fmb->mii_bus.id, MII_BUS_ID_SIZE, "0");
fmb->mii_bus.name = "Fixed MDIO Bus";
fmb->mii_bus.dev = &pdev->dev;
fmb->mii_bus.read = &fixed_mdio_read;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f4c4fd85425f6807bf8258da78cb14bb7ee7bd35..8b1121b02f9806d9323cfea84fb157bc83c5ae08 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -86,35 +86,55 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
EXPORT_SYMBOL(phy_device_create);
/**
- * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * get_phy_id - reads the specified addr for its ID.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
*
* Description: Reads the ID registers of the PHY at @addr on the
- * @bus, then allocates and returns the phy_device to represent it.
+ * @bus, stores it in @phy_id and returns zero on success.
*/
-struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
{
int phy_reg;
- u32 phy_id;
- struct phy_device *dev = NULL;
/* Grab the bits from PHYIR1, and put them
* in the upper half */
phy_reg = bus->read(bus, addr, MII_PHYSID1);
if (phy_reg < 0)
- return ERR_PTR(phy_reg);
+ return -EIO;
- phy_id = (phy_reg & 0xffff) << 16;
+ *phy_id = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = bus->read(bus, addr, MII_PHYSID2);
if (phy_reg < 0)
- return ERR_PTR(phy_reg);
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
+
+/**
+ * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ * @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+{
+ struct phy_device *dev = NULL;
+ u32 phy_id;
+ int r;
- phy_id |= (phy_reg & 0xffff);
+ r = get_phy_id(bus, addr, &phy_id);
+ if (r)
+ return ERR_PTR(r);
/* If the phy_id is all Fs, there is no device there */
if (0xffffffff == phy_id)
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index ac0ac98b19cda96aa3be88a9483e145d6aae5531..4fad4ddb35048419beb3484ea4d14acd4ac6b241 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -301,7 +301,7 @@ static int pppoe_device_event(struct notifier_block *this,
{
struct net_device *dev = (struct net_device *) ptr;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
return NOTIFY_DONE;
/* Only look at sockets that are using this specific device. */
@@ -392,7 +392,7 @@ static int pppoe_rcv(struct sk_buff *skb,
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
goto drop;
if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
@@ -424,7 +424,7 @@ static int pppoe_disc_rcv(struct sk_buff *skb,
struct pppoe_hdr *ph;
struct pppox_sock *po;
- if (dev->nd_net != &init_net)
+ if (dev_net(dev) != &init_net)
goto abort;
if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index c16de5129a71557f43880236a9f81eee8bd45559..0d32123085e98a92f06f0e7e8b20f1f04f0048b9 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -87,7 +87,7 @@ static inline int wpa2_capable(void)
static inline int precise_ie(void)
{
- return 0; /* FIXME */
+ return (0 <= ps3_compare_firmware_version(2, 2, 0));
}
/*
* post_eurus_cmd helpers
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index a6aeb9d6044336dc7f64b1c828791ba640bab3c9..b7f7b2227d5697df09413841074d143c5ef8ac88 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2472,8 +2472,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
if (seg_cnt == 1) {
/* Terminate the last segment. */
- oal_entry->len =
- cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
+ oal_entry->len |= cpu_to_le32(OAL_LAST_ENTRY);
} else {
oal = tx_cb->oal;
for (completed_segs=0; completed_segssize);
}
/* Terminate the last segment. */
- oal_entry->len =
- cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
+ oal_entry->len |= cpu_to_le32(OAL_LAST_ENTRY);
}
return NETDEV_TX_OK;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index c082cf0b1ac6dd3f48ec2ee3f37c1c10aaf9a986..dcbe01b0ca0de05d3c21d75f5661858d88157232 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -50,6 +50,8 @@
* Possible values '1' for enable , '0' for disable.
* Default is '2' - which means disable in promisc mode
* and enable in non-promiscuous mode.
+ * multiq: This parameter used to enable/disable MULTIQUEUE support.
+ * Possible values '1' for enable and '0' for disable. Default is '0'
************************************************************************/
#include
@@ -386,6 +388,26 @@ static void s2io_vlan_rx_register(struct net_device *dev,
/* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
static int vlan_strip_flag;
+/* Unregister the vlan */
+static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
+{
+ int i;
+ struct s2io_nic *nic = dev->priv;
+ unsigned long flags[MAX_TX_FIFOS];
+ struct mac_info *mac_control = &nic->mac_control;
+ struct config_param *config = &nic->config;
+
+ for (i = 0; i < config->tx_fifo_num; i++)
+ spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
+
+ if (nic->vlgrp)
+ vlan_group_set_device(nic->vlgrp, vid, NULL);
+
+ for (i = config->tx_fifo_num - 1; i >= 0; i--)
+ spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
+ flags[i]);
+}
+
/*
* Constants to be programmed into the Xena's registers, to configure
* the XAUI.
@@ -456,10 +478,9 @@ MODULE_VERSION(DRV_VERSION);
/* Module Loadable parameters. */
-S2IO_PARM_INT(tx_fifo_num, 1);
+S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
S2IO_PARM_INT(rx_ring_num, 1);
-
-
+S2IO_PARM_INT(multiq, 0);
S2IO_PARM_INT(rx_ring_mode, 1);
S2IO_PARM_INT(use_continuous_tx_intrs, 1);
S2IO_PARM_INT(rmac_pause_time, 0x100);
@@ -469,6 +490,8 @@ S2IO_PARM_INT(shared_splits, 0);
S2IO_PARM_INT(tmac_util_period, 5);
S2IO_PARM_INT(rmac_util_period, 5);
S2IO_PARM_INT(l3l4hdr_size, 128);
+/* 0 is no steering, 1 is Priority steering, 2 is Default steering */
+S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
/* Frequency of Rx desc syncs expressed as power of 2 */
S2IO_PARM_INT(rxsync_frequency, 3);
/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
@@ -533,6 +556,101 @@ static struct pci_driver s2io_driver = {
/* A simplifier macro used both by init and free shared_mem Fns(). */
#define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
+/* netqueue manipulation helper functions */
+static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
+{
+ int i;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (sp->config.multiq) {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ netif_stop_subqueue(sp->dev, i);
+ } else
+#endif
+ {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
+ netif_stop_queue(sp->dev);
+ }
+}
+
+static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (sp->config.multiq)
+ netif_stop_subqueue(sp->dev, fifo_no);
+ else
+#endif
+ {
+ sp->mac_control.fifos[fifo_no].queue_state =
+ FIFO_QUEUE_STOP;
+ netif_stop_queue(sp->dev);
+ }
+}
+
+static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
+{
+ int i;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (sp->config.multiq) {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ netif_start_subqueue(sp->dev, i);
+ } else
+#endif
+ {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
+ netif_start_queue(sp->dev);
+ }
+}
+
+static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (sp->config.multiq)
+ netif_start_subqueue(sp->dev, fifo_no);
+ else
+#endif
+ {
+ sp->mac_control.fifos[fifo_no].queue_state =
+ FIFO_QUEUE_START;
+ netif_start_queue(sp->dev);
+ }
+}
+
+static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
+{
+ int i;
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (sp->config.multiq) {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ netif_wake_subqueue(sp->dev, i);
+ } else
+#endif
+ {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
+ netif_wake_queue(sp->dev);
+ }
+}
+
+static inline void s2io_wake_tx_queue(
+ struct fifo_info *fifo, int cnt, u8 multiq)
+{
+
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (multiq) {
+ if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
+ netif_wake_subqueue(fifo->dev, fifo->fifo_no);
+ } else
+#endif
+ if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
+ if (netif_queue_stopped(fifo->dev)) {
+ fifo->queue_state = FIFO_QUEUE_START;
+ netif_wake_queue(fifo->dev);
+ }
+ }
+}
+
/**
* init_shared_mem - Allocation and Initialization of Memory
* @nic: Device private variable.
@@ -614,6 +732,7 @@ static int init_shared_mem(struct s2io_nic *nic)
mac_control->fifos[i].fifo_no = i;
mac_control->fifos[i].nic = nic;
mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
+ mac_control->fifos[i].dev = dev;
for (j = 0; j < page_num; j++) {
int k = 0;
@@ -2948,7 +3067,7 @@ static void rx_intr_handler(struct ring_info *ring_data)
struct lro *lro = &nic->lro0_n[i];
if (lro->in_use) {
update_L3L4_header(nic, lro);
- queue_rx_frame(lro->parent);
+ queue_rx_frame(lro->parent, lro->vlan_tag);
clear_lro_session(lro);
}
}
@@ -2972,10 +3091,10 @@ static void rx_intr_handler(struct ring_info *ring_data)
static void tx_intr_handler(struct fifo_info *fifo_data)
{
struct s2io_nic *nic = fifo_data->nic;
- struct net_device *dev = (struct net_device *) nic->dev;
struct tx_curr_get_info get_info, put_info;
- struct sk_buff *skb;
+ struct sk_buff *skb = NULL;
struct TxD *txdlp;
+ int pkt_cnt = 0;
unsigned long flags = 0;
u8 err_mask;
@@ -3036,6 +3155,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
return;
}
+ pkt_cnt++;
/* Updating the statistics block */
nic->stats.tx_bytes += skb->len;
@@ -3051,8 +3171,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
get_info.offset;
}
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
+ s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
}
@@ -3933,8 +4052,7 @@ static int s2io_open(struct net_device *dev)
err = -ENODEV;
goto hw_init_failed;
}
-
- netif_start_queue(dev);
+ s2io_start_all_tx_queue(sp);
return 0;
hw_init_failed:
@@ -3979,8 +4097,7 @@ static int s2io_close(struct net_device *dev)
if (!is_s2io_card_up(sp))
return 0;
- netif_stop_queue(dev);
-
+ s2io_stop_all_tx_queue(sp);
/* delete all populated mac entries */
for (offset = 1; offset < config->max_mc_addr; offset++) {
tmp64 = do_s2io_read_unicast_mc(sp, offset);
@@ -4016,11 +4133,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
struct TxFIFO_element __iomem *tx_fifo;
unsigned long flags = 0;
u16 vlan_tag = 0;
- int vlan_priority = 0;
struct fifo_info *fifo = NULL;
struct mac_info *mac_control;
struct config_param *config;
+ int do_spin_lock = 1;
int offload_type;
+ int enable_per_list_interrupt = 0;
struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
mac_control = &sp->mac_control;
@@ -4042,15 +4160,67 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
}
queue = 0;
- /* Get Fifo number to Transmit based on vlan priority */
- if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+ if (sp->vlgrp && vlan_tx_tag_present(skb))
vlan_tag = vlan_tx_tag_get(skb);
- vlan_priority = vlan_tag >> 13;
- queue = config->fifo_mapping[vlan_priority];
+ if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *ip;
+ struct tcphdr *th;
+ ip = ip_hdr(skb);
+
+ if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
+ th = (struct tcphdr *)(((unsigned char *)ip) +
+ ip->ihl*4);
+
+ if (ip->protocol == IPPROTO_TCP) {
+ queue_len = sp->total_tcp_fifos;
+ queue = (ntohs(th->source) +
+ ntohs(th->dest)) &
+ sp->fifo_selector[queue_len - 1];
+ if (queue >= queue_len)
+ queue = queue_len - 1;
+ } else if (ip->protocol == IPPROTO_UDP) {
+ queue_len = sp->total_udp_fifos;
+ queue = (ntohs(th->source) +
+ ntohs(th->dest)) &
+ sp->fifo_selector[queue_len - 1];
+ if (queue >= queue_len)
+ queue = queue_len - 1;
+ queue += sp->udp_fifo_idx;
+ if (skb->len > 1024)
+ enable_per_list_interrupt = 1;
+ do_spin_lock = 0;
+ }
+ }
+ }
+ } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
+ /* get fifo number based on skb->priority value */
+ queue = config->fifo_mapping
+ [skb->priority & (MAX_TX_FIFOS - 1)];
+ fifo = &mac_control->fifos[queue];
+
+ if (do_spin_lock)
+ spin_lock_irqsave(&fifo->tx_lock, flags);
+ else {
+ if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
+ return NETDEV_TX_LOCKED;
+ }
+
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (sp->config.multiq) {
+ if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
+ spin_unlock_irqrestore(&fifo->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+ } else
+#endif
+ if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
+ if (netif_queue_stopped(dev)) {
+ spin_unlock_irqrestore(&fifo->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
}
- fifo = &mac_control->fifos[queue];
- spin_lock_irqsave(&fifo->tx_lock, flags);
put_off = (u16) fifo->tx_curr_put_info.offset;
get_off = (u16) fifo->tx_curr_get_info.offset;
txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr;
@@ -4060,7 +4230,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
if (txdp->Host_Control ||
((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
- netif_stop_queue(dev);
+ s2io_stop_tx_queue(sp, fifo->fifo_no);
dev_kfree_skb(skb);
spin_unlock_irqrestore(&fifo->tx_lock, flags);
return 0;
@@ -4079,8 +4249,10 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
txdp->Control_1 |= TXD_LIST_OWN_XENA;
txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
-
- if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+ if (enable_per_list_interrupt)
+ if (put_off & (queue_len >> 5))
+ txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
+ if (vlan_tag) {
txdp->Control_2 |= TXD_VLAN_ENABLE;
txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
}
@@ -4095,11 +4267,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
#ifdef __BIG_ENDIAN
+ /* both variants do cpu_to_be64(be32_to_cpu(...)) */
fifo->ufo_in_band_v[put_off] =
- (u64)skb_shinfo(skb)->ip6_frag_id;
+ (__force u64)skb_shinfo(skb)->ip6_frag_id;
#else
fifo->ufo_in_band_v[put_off] =
- (u64)skb_shinfo(skb)->ip6_frag_id << 32;
+ (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
#endif
txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
txdp->Buffer_Pointer = pci_map_single(sp->pdev,
@@ -4166,7 +4339,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
DBG_PRINT(TX_DBG,
"No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
put_off, get_off);
- netif_stop_queue(dev);
+ s2io_stop_tx_queue(sp, fifo->fifo_no);
}
mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
dev->trans_start = jiffies;
@@ -4178,7 +4351,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
pci_map_failed:
stats->pci_map_fail_cnt++;
- netif_stop_queue(dev);
+ s2io_stop_tx_queue(sp, fifo->fifo_no);
stats->mem_freed += skb->truesize;
dev_kfree_skb(skb);
spin_unlock_irqrestore(&fifo->tx_lock, flags);
@@ -4590,7 +4763,7 @@ static void s2io_handle_errors(void * dev_id)
return;
reset:
- netif_stop_queue(dev);
+ s2io_stop_all_tx_queue(sp);
schedule_work(&sp->rst_timer_task);
sw_stat->soft_reset_cnt++;
return;
@@ -6577,16 +6750,15 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
dev->mtu = new_mtu;
if (netif_running(dev)) {
+ s2io_stop_all_tx_queue(sp);
s2io_card_down(sp);
- netif_stop_queue(dev);
ret = s2io_card_up(sp);
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
__FUNCTION__);
return ret;
}
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
+ s2io_wake_all_tx_queue(sp);
} else { /* Device is down */
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = new_mtu;
@@ -6694,7 +6866,7 @@ static void s2io_set_link(struct work_struct *work)
} else {
DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
- netif_stop_queue(dev);
+ s2io_stop_all_tx_queue(nic);
}
}
val64 = readq(&bar0->adapter_control);
@@ -6921,11 +7093,11 @@ static int s2io_add_isr(struct s2io_nic * sp)
if(!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%lx\n",sp->desc[i],
+ "Data:0x%llx\n",sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
- (unsigned long)
- ntohl(sp->msix_info[i].data));
+ (unsigned long long)
+ sp->msix_info[i].data);
} else {
msix_tx_cnt++;
}
@@ -6939,11 +7111,11 @@ static int s2io_add_isr(struct s2io_nic * sp)
if(!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%lx\n",sp->desc[i],
+ "Data:0x%llx\n",sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
- (unsigned long)
- ntohl(sp->msix_info[i].data));
+ (unsigned long long)
+ sp->msix_info[i].data);
} else {
msix_rx_cnt++;
}
@@ -7184,7 +7356,7 @@ static void s2io_restart_nic(struct work_struct *work)
DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
dev->name);
}
- netif_wake_queue(dev);
+ s2io_wake_all_tx_queue(sp);
DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
dev->name);
out_unlock:
@@ -7374,7 +7546,8 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
{
lro_append_pkt(sp, lro,
skb, tcp_len);
- queue_rx_frame(lro->parent);
+ queue_rx_frame(lro->parent,
+ lro->vlan_tag);
clear_lro_session(lro);
sp->mac_control.stats_info->
sw_stat.flush_max_pkts++;
@@ -7385,7 +7558,8 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
lro->frags_len;
sp->mac_control.stats_info->
sw_stat.sending_both++;
- queue_rx_frame(lro->parent);
+ queue_rx_frame(lro->parent,
+ lro->vlan_tag);
clear_lro_session(lro);
goto send_up;
case 0: /* sessions exceeded */
@@ -7411,31 +7585,12 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
*/
skb->ip_summed = CHECKSUM_NONE;
}
- } else {
+ } else
skb->ip_summed = CHECKSUM_NONE;
- }
+
sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
- if (!sp->lro) {
- skb->protocol = eth_type_trans(skb, dev);
- if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
- vlan_strip_flag)) {
- /* Queueing the vlan frame to the upper layer */
- if (napi)
- vlan_hwaccel_receive_skb(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
- else
- vlan_hwaccel_rx(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
- } else {
- if (napi)
- netif_receive_skb(skb);
- else
- netif_rx(skb);
- }
- } else {
send_up:
- queue_rx_frame(skb);
- }
+ queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
dev->last_rx = jiffies;
aggregate:
atomic_dec(&sp->rx_bufs_left[ring_no]);
@@ -7463,6 +7618,7 @@ static void s2io_link(struct s2io_nic * sp, int link)
init_tti(sp, link);
if (link == LINK_DOWN) {
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
+ s2io_stop_all_tx_queue(sp);
netif_carrier_off(dev);
if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
sp->mac_control.stats_info->sw_stat.link_up_time =
@@ -7475,6 +7631,7 @@ static void s2io_link(struct s2io_nic * sp, int link)
jiffies - sp->start_time;
sp->mac_control.stats_info->sw_stat.link_up_cnt++;
netif_carrier_on(dev);
+ s2io_wake_all_tx_queue(sp);
}
}
sp->last_link_state = link;
@@ -7511,20 +7668,48 @@ static void s2io_init_pci(struct s2io_nic * sp)
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
}
-static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type)
+static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
+ u8 *dev_multiq)
{
if ((tx_fifo_num > MAX_TX_FIFOS) ||
- (tx_fifo_num < FIFO_DEFAULT_NUM)) {
+ (tx_fifo_num < 1)) {
DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
"(%d) not supported\n", tx_fifo_num);
- tx_fifo_num =
- ((tx_fifo_num > MAX_TX_FIFOS)? MAX_TX_FIFOS :
- ((tx_fifo_num < FIFO_DEFAULT_NUM) ? FIFO_DEFAULT_NUM :
- tx_fifo_num));
+
+ if (tx_fifo_num < 1)
+ tx_fifo_num = 1;
+ else
+ tx_fifo_num = MAX_TX_FIFOS;
+
DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
DBG_PRINT(ERR_DBG, "tx fifos\n");
}
+#ifndef CONFIG_NETDEVICES_MULTIQUEUE
+ if (multiq) {
+ DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n");
+ multiq = 0;
+ }
+#endif
+ if (multiq)
+ *dev_multiq = multiq;
+
+ if (tx_steering_type && (1 == tx_fifo_num)) {
+ if (tx_steering_type != TX_DEFAULT_STEERING)
+ DBG_PRINT(ERR_DBG,
+ "s2io: Tx steering is not supported with "
+ "one fifo. Disabling Tx steering.\n");
+ tx_steering_type = NO_STEERING;
+ }
+
+ if ((tx_steering_type < NO_STEERING) ||
+ (tx_steering_type > TX_DEFAULT_STEERING)) {
+ DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
+ "supported\n");
+ DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
+ tx_steering_type = NO_STEERING;
+ }
+
if ( rx_ring_num > 8) {
DBG_PRINT(ERR_DBG, "s2io: Requested number of Rx rings not "
"supported\n");
@@ -7616,9 +7801,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
struct config_param *config;
int mode;
u8 dev_intr_type = intr_type;
+ u8 dev_multiq = 0;
DECLARE_MAC_BUF(mac);
- if ((ret = s2io_verify_parm(pdev, &dev_intr_type)))
+ ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
+ if (ret)
return ret;
if ((ret = pci_enable_device(pdev))) {
@@ -7649,7 +7836,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
pci_disable_device(pdev);
return -ENODEV;
}
-
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (dev_multiq)
+ dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
+ else
+#endif
dev = alloc_etherdev(sizeof(struct s2io_nic));
if (dev == NULL) {
DBG_PRINT(ERR_DBG, "Device allocation failed\n");
@@ -7698,17 +7889,45 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
config = &sp->config;
config->napi = napi;
+ config->tx_steering_type = tx_steering_type;
/* Tx side parameters. */
- config->tx_fifo_num = tx_fifo_num;
- for (i = 0; i < MAX_TX_FIFOS; i++) {
+ if (config->tx_steering_type == TX_PRIORITY_STEERING)
+ config->tx_fifo_num = MAX_TX_FIFOS;
+ else
+ config->tx_fifo_num = tx_fifo_num;
+
+ /* Initialize the fifos used for tx steering */
+ if (config->tx_fifo_num < 5) {
+ if (config->tx_fifo_num == 1)
+ sp->total_tcp_fifos = 1;
+ else
+ sp->total_tcp_fifos = config->tx_fifo_num - 1;
+ sp->udp_fifo_idx = config->tx_fifo_num - 1;
+ sp->total_udp_fifos = 1;
+ sp->other_fifo_idx = sp->total_tcp_fifos - 1;
+ } else {
+ sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
+ FIFO_OTHER_MAX_NUM);
+ sp->udp_fifo_idx = sp->total_tcp_fifos;
+ sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
+ sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
+ }
+
+ config->multiq = dev_multiq;
+ for (i = 0; i < config->tx_fifo_num; i++) {
config->tx_cfg[i].fifo_len = tx_fifo_len[i];
config->tx_cfg[i].fifo_priority = i;
}
/* mapping the QoS priority to the configured fifos */
for (i = 0; i < MAX_TX_FIFOS; i++)
- config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
+ config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
+
+ /* map the hashing selector table to the configured fifos */
+ for (i = 0; i < config->tx_fifo_num; i++)
+ sp->fifo_selector[i] = fifo_selector[i];
+
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
for (i = 0; i < config->tx_fifo_num; i++) {
@@ -7793,6 +8012,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_rx_register = s2io_vlan_rx_register;
+ dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
/*
* will use eth_mac_addr() for dev->set_mac_address
@@ -7813,7 +8033,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
dev->features |= NETIF_F_UFO;
dev->features |= NETIF_F_HW_CSUM;
}
-
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ if (config->multiq)
+ dev->features |= NETIF_F_MULTI_QUEUE;
+#endif
dev->tx_timeout = &s2io_tx_watchdog;
dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
@@ -7962,6 +8185,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
if (napi)
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
+
+ DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
+ sp->config.tx_fifo_num);
+
switch(sp->config.intr_type) {
case INTA:
DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
@@ -7970,6 +8197,29 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
break;
}
+ if (sp->config.multiq) {
+ for (i = 0; i < sp->config.tx_fifo_num; i++)
+ mac_control->fifos[i].multiq = config->multiq;
+ DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
+ dev->name);
+ } else
+ DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
+ dev->name);
+
+ switch (sp->config.tx_steering_type) {
+ case NO_STEERING:
+ DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
+ " transmit\n", dev->name);
+ break;
+ case TX_PRIORITY_STEERING:
+ DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
+ " transmit\n", dev->name);
+ break;
+ case TX_DEFAULT_STEERING:
+ DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
+ " transmit\n", dev->name);
+ }
+
if (sp->lro)
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
dev->name);
@@ -8064,7 +8314,8 @@ module_init(s2io_starter);
module_exit(s2io_closer);
static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
- struct tcphdr **tcp, struct RxD_t *rxdp)
+ struct tcphdr **tcp, struct RxD_t *rxdp,
+ struct s2io_nic *sp)
{
int ip_off;
u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
@@ -8075,19 +8326,20 @@ static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
return -1;
}
- /* TODO:
- * By default the VLAN field in the MAC is stripped by the card, if this
- * feature is turned off in rx_pa_cfg register, then the ip_off field
- * has to be shifted by a further 2 bytes
- */
- switch (l2_type) {
- case 0: /* DIX type */
- case 4: /* DIX type with VLAN */
- ip_off = HEADER_ETHERNET_II_802_3_SIZE;
- break;
+ /* Checking for DIX type or DIX type with VLAN */
+ if ((l2_type == 0)
+ || (l2_type == 4)) {
+ ip_off = HEADER_ETHERNET_II_802_3_SIZE;
+ /*
+ * If vlan stripping is disabled and the frame is VLAN tagged,
+ * shift the offset by the VLAN header size bytes.
+ */
+ if ((!vlan_strip_flag) &&
+ (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
+ ip_off += HEADER_VLAN_SIZE;
+ } else {
/* LLC, SNAP etc are considered non-mergeable */
- default:
- return -1;
+ return -1;
}
*ip = (struct iphdr *)((u8 *)buffer + ip_off);
@@ -8114,7 +8366,7 @@ static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
}
static void initiate_new_session(struct lro *lro, u8 *l2h,
- struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len)
+ struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag)
{
DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
lro->l2h = l2h;
@@ -8125,6 +8377,7 @@ static void initiate_new_session(struct lro *lro, u8 *l2h,
lro->sg_num = 1;
lro->total_len = ntohs(ip->tot_len);
lro->frags_len = 0;
+ lro->vlan_tag = vlan_tag;
/*
* check if we saw TCP timestamp. Other consistency checks have
* already been done.
@@ -8256,15 +8509,16 @@ s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,
struct iphdr *ip;
struct tcphdr *tcph;
int ret = 0, i;
+ u16 vlan_tag = 0;
if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
- rxdp))) {
+ rxdp, sp))) {
DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
ip->saddr, ip->daddr);
- } else {
+ } else
return ret;
- }
+ vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
tcph = (struct tcphdr *)*tcp;
*tcp_len = get_l4_pyld_length(ip, tcph);
for (i=0; idev;
+ struct s2io_nic *sp = dev->priv;
skb->protocol = eth_type_trans(skb, dev);
- if (napi)
- netif_receive_skb(skb);
- else
- netif_rx(skb);
+ if (sp->vlgrp && vlan_tag
+ && (vlan_strip_flag)) {
+ /* Queueing the vlan frame to the upper layer */
+ if (sp->config.napi)
+ vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
+ else
+ vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
+ } else {
+ if (sp->config.napi)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
+ }
}
static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 64b88eb48287d2d583897af67889e6474beebaa6..e68fdf7e42600558ff7114772b58c8ed65c3ece7 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -360,7 +360,10 @@ struct stat_block {
#define MAX_TX_FIFOS 8
#define MAX_RX_RINGS 8
-#define FIFO_DEFAULT_NUM 1
+#define FIFO_DEFAULT_NUM 5
+#define FIFO_UDP_MAX_NUM 2 /* 0 - even, 1 -odd ports */
+#define FIFO_OTHER_MAX_NUM 1
+
#define MAX_RX_DESC_1 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 )
#define MAX_RX_DESC_2 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
@@ -379,6 +382,8 @@ static int fifo_map[][MAX_TX_FIFOS] = {
{0, 1, 2, 3, 4, 5, 6, 7},
};
+static u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7};
+
/* Maintains Per FIFO related information. */
struct tx_fifo_config {
#define MAX_AVAILABLE_TXDS 8192
@@ -431,6 +436,12 @@ struct config_param {
/* Tx Side */
u32 tx_fifo_num; /*Number of Tx FIFOs */
+ /* 0-No steering, 1-Priority steering, 2-Default fifo map */
+#define NO_STEERING 0
+#define TX_PRIORITY_STEERING 0x1
+#define TX_DEFAULT_STEERING 0x2
+ u8 tx_steering_type;
+
u8 fifo_mapping[MAX_TX_FIFOS];
struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */
@@ -464,6 +475,7 @@ struct config_param {
int max_mc_addr; /* xena=64 herc=256 */
int max_mac_addr; /* xena=16 herc=64 */
int mc_start_offset; /* xena=16 herc=64 */
+ u8 multiq;
};
/* Structure representing MAC Addrs */
@@ -534,6 +546,7 @@ struct RxD_t {
#define RXD_OWN_XENA s2BIT(7)
#define RXD_T_CODE (s2BIT(12)|s2BIT(13)|s2BIT(14)|s2BIT(15))
#define RXD_FRAME_PROTO vBIT(0xFFFF,24,8)
+#define RXD_FRAME_VLAN_TAG s2BIT(24)
#define RXD_FRAME_PROTO_IPV4 s2BIT(27)
#define RXD_FRAME_PROTO_IPV6 s2BIT(28)
#define RXD_FRAME_IP_FRAG s2BIT(29)
@@ -720,6 +733,15 @@ struct fifo_info {
* the buffers
*/
struct tx_curr_get_info tx_curr_get_info;
+#define FIFO_QUEUE_START 0
+#define FIFO_QUEUE_STOP 1
+ int queue_state;
+
+ /* copy of sp->dev pointer */
+ struct net_device *dev;
+
+ /* copy of multiq status */
+ u8 multiq;
/* Per fifo lock */
spinlock_t tx_lock;
@@ -808,10 +830,11 @@ struct lro {
int sg_num;
int in_use;
__be16 window;
+ u16 vlan_tag;
u32 cur_tsval;
__be32 cur_tsecr;
u8 saw_ts;
-};
+} ____cacheline_aligned;
/* These flags represent the devices temporary state */
enum s2io_device_state_t
@@ -885,6 +908,27 @@ struct s2io_nic {
*/
int rx_csum;
+ /* Below variables are used for fifo selection to transmit a packet */
+ u16 fifo_selector[MAX_TX_FIFOS];
+
+ /* Total fifos for tcp packets */
+ u8 total_tcp_fifos;
+
+ /*
+ * Beginning index of udp for udp packets
+ * Value will be equal to
+ * (tx_fifo_num - FIFO_UDP_MAX_NUM - FIFO_OTHER_MAX_NUM)
+ */
+ u8 udp_fifo_idx;
+
+ u8 total_udp_fifos;
+
+ /*
+ * Beginning index of fifo for all other packets
+ * Value will be equal to (tx_fifo_num - FIFO_OTHER_MAX_NUM)
+ */
+ u8 other_fifo_idx;
+
/* after blink, the adapter must be restored with original
* values.
*/
@@ -1087,7 +1131,7 @@ static int
s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,
struct RxD_t *rxdp, struct s2io_nic *sp);
static void clear_lro_session(struct lro *lro);
-static void queue_rx_frame(struct sk_buff *skb);
+static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag);
static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro);
static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
struct sk_buff *skb, u32 tcp_len);
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index 487f9d2ac5b4750fbabc83008967dd1d0dc150fb..5986cec17f19eff6b3aa06ba9f4d500ef953b8bd 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -88,31 +88,31 @@ static int sb1000_close(struct net_device *dev);
/* SB1000 hardware routines to be used during open/configuration phases */
-static inline int card_wait_for_busy_clear(const int ioaddr[],
+static int card_wait_for_busy_clear(const int ioaddr[],
const char* name);
-static inline int card_wait_for_ready(const int ioaddr[], const char* name,
+static int card_wait_for_ready(const int ioaddr[], const char* name,
unsigned char in[]);
static int card_send_command(const int ioaddr[], const char* name,
const unsigned char out[], unsigned char in[]);
/* SB1000 hardware routines to be used during frame rx interrupt */
-static inline int sb1000_wait_for_ready(const int ioaddr[], const char* name);
-static inline int sb1000_wait_for_ready_clear(const int ioaddr[],
+static int sb1000_wait_for_ready(const int ioaddr[], const char* name);
+static int sb1000_wait_for_ready_clear(const int ioaddr[],
const char* name);
-static inline void sb1000_send_command(const int ioaddr[], const char* name,
+static void sb1000_send_command(const int ioaddr[], const char* name,
const unsigned char out[]);
-static inline void sb1000_read_status(const int ioaddr[], unsigned char in[]);
-static inline void sb1000_issue_read_command(const int ioaddr[],
+static void sb1000_read_status(const int ioaddr[], unsigned char in[]);
+static void sb1000_issue_read_command(const int ioaddr[],
const char* name);
/* SB1000 commands for open/configuration */
-static inline int sb1000_reset(const int ioaddr[], const char* name);
-static inline int sb1000_check_CRC(const int ioaddr[], const char* name);
+static int sb1000_reset(const int ioaddr[], const char* name);
+static int sb1000_check_CRC(const int ioaddr[], const char* name);
static inline int sb1000_start_get_set_command(const int ioaddr[],
const char* name);
-static inline int sb1000_end_get_set_command(const int ioaddr[],
+static int sb1000_end_get_set_command(const int ioaddr[],
const char* name);
-static inline int sb1000_activate(const int ioaddr[], const char* name);
+static int sb1000_activate(const int ioaddr[], const char* name);
static int sb1000_get_firmware_version(const int ioaddr[],
const char* name, unsigned char version[], int do_end);
static int sb1000_get_frequency(const int ioaddr[], const char* name,
@@ -125,8 +125,8 @@ static int sb1000_set_PIDs(const int ioaddr[], const char* name,
const short PID[]);
/* SB1000 commands for frame rx interrupt */
-static inline int sb1000_rx(struct net_device *dev);
-static inline void sb1000_error_dpc(struct net_device *dev);
+static int sb1000_rx(struct net_device *dev);
+static void sb1000_error_dpc(struct net_device *dev);
static const struct pnp_device_id sb1000_pnp_ids[] = {
{ "GIC1000", 0 },
@@ -250,7 +250,7 @@ static struct pnp_driver sb1000_driver = {
static const int TimeOutJiffies = (875 * HZ) / 100;
/* Card Wait For Busy Clear (cannot be used during an interrupt) */
-static inline int
+static int
card_wait_for_busy_clear(const int ioaddr[], const char* name)
{
unsigned char a;
@@ -274,7 +274,7 @@ card_wait_for_busy_clear(const int ioaddr[], const char* name)
}
/* Card Wait For Ready (cannot be used during an interrupt) */
-static inline int
+static int
card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
{
unsigned char a;
@@ -354,7 +354,7 @@ card_send_command(const int ioaddr[], const char* name,
static const int Sb1000TimeOutJiffies = 7 * HZ;
/* Card Wait For Ready (to be used during frame rx) */
-static inline int
+static int
sb1000_wait_for_ready(const int ioaddr[], const char* name)
{
unsigned long timeout;
@@ -380,7 +380,7 @@ sb1000_wait_for_ready(const int ioaddr[], const char* name)
}
/* Card Wait For Ready Clear (to be used during frame rx) */
-static inline int
+static int
sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
{
unsigned long timeout;
@@ -405,7 +405,7 @@ sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
}
/* Card Send Command (to be used during frame rx) */
-static inline void
+static void
sb1000_send_command(const int ioaddr[], const char* name,
const unsigned char out[])
{
@@ -422,7 +422,7 @@ sb1000_send_command(const int ioaddr[], const char* name,
}
/* Card Read Status (to be used during frame rx) */
-static inline void
+static void
sb1000_read_status(const int ioaddr[], unsigned char in[])
{
in[1] = inb(ioaddr[0] + 1);
@@ -434,10 +434,10 @@ sb1000_read_status(const int ioaddr[], unsigned char in[])
}
/* Issue Read Command (to be used during frame rx) */
-static inline void
+static void
sb1000_issue_read_command(const int ioaddr[], const char* name)
{
- const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
+ static const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
sb1000_wait_for_ready_clear(ioaddr, name);
outb(0xa0, ioaddr[0] + 6);
@@ -450,12 +450,13 @@ sb1000_issue_read_command(const int ioaddr[], const char* name)
* SB1000 commands for open/configuration
*/
/* reset SB1000 card */
-static inline int
+static int
sb1000_reset(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int port, status;
- const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
port = ioaddr[1] + 6;
outb(0x4, port);
@@ -479,12 +480,13 @@ sb1000_reset(const int ioaddr[], const char* name)
}
/* check SB1000 firmware CRC */
-static inline int
+static int
sb1000_check_CRC(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x1f, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int crc, status;
- const unsigned char Command0[6] = {0x80, 0x1f, 0x00, 0x00, 0x00, 0x00};
/* check CRC */
if ((status = card_send_command(ioaddr, name, Command0, st)))
@@ -498,32 +500,35 @@ sb1000_check_CRC(const int ioaddr[], const char* name)
static inline int
sb1000_start_get_set_command(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x1b, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
- const unsigned char Command0[6] = {0x80, 0x1b, 0x00, 0x00, 0x00, 0x00};
return card_send_command(ioaddr, name, Command0, st);
}
-static inline int
+static int
sb1000_end_get_set_command(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x1b, 0x02, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x20, 0x00, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x1b, 0x02, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x20, 0x00, 0x00, 0x00, 0x00, 0x00};
if ((status = card_send_command(ioaddr, name, Command0, st)))
return status;
return card_send_command(ioaddr, name, Command1, st);
}
-static inline int
+static int
sb1000_activate(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
ssleep(1);
if ((status = card_send_command(ioaddr, name, Command0, st)))
@@ -544,9 +549,10 @@ static int
sb1000_get_firmware_version(const int ioaddr[], const char* name,
unsigned char version[], int do_end)
{
+ static const unsigned char Command0[6] = {0x80, 0x23, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x23, 0x00, 0x00, 0x00, 0x00};
if ((status = sb1000_start_get_set_command(ioaddr, name)))
return status;
@@ -566,9 +572,10 @@ sb1000_get_firmware_version(const int ioaddr[], const char* name,
static int
sb1000_get_frequency(const int ioaddr[], const char* name, int* frequency)
{
+ static const unsigned char Command0[6] = {0x80, 0x44, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x44, 0x00, 0x00, 0x00, 0x00};
udelay(1000);
if ((status = sb1000_start_get_set_command(ioaddr, name)))
@@ -613,12 +620,13 @@ sb1000_set_frequency(const int ioaddr[], const char* name, int frequency)
static int
sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
{
+ static const unsigned char Command0[6] = {0x80, 0x40, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x80, 0x41, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command2[6] = {0x80, 0x42, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command3[6] = {0x80, 0x43, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x40, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x80, 0x41, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command2[6] = {0x80, 0x42, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command3[6] = {0x80, 0x43, 0x00, 0x00, 0x00, 0x00};
udelay(1000);
if ((status = sb1000_start_get_set_command(ioaddr, name)))
@@ -647,6 +655,8 @@ sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
static int
sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
{
+ static const unsigned char Command4[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
short p;
int status;
@@ -654,7 +664,6 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
unsigned char Command1[6] = {0x80, 0x32, 0x00, 0x00, 0x00, 0x00};
unsigned char Command2[6] = {0x80, 0x33, 0x00, 0x00, 0x00, 0x00};
unsigned char Command3[6] = {0x80, 0x34, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command4[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
udelay(1000);
if ((status = sb1000_start_get_set_command(ioaddr, name)))
@@ -694,7 +703,7 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
}
-static inline void
+static void
sb1000_print_status_buffer(const char* name, unsigned char st[],
unsigned char buffer[], int size)
{
@@ -725,7 +734,7 @@ sb1000_print_status_buffer(const char* name, unsigned char st[],
/* receive a single frame and assemble datagram
* (this is the heart of the interrupt routine)
*/
-static inline int
+static int
sb1000_rx(struct net_device *dev)
{
@@ -888,14 +897,15 @@ dropped_frame:
return -1;
}
-static inline void
+static void
sb1000_error_dpc(struct net_device *dev)
{
+ static const unsigned char Command0[6] = {0x80, 0x26, 0x00, 0x00, 0x00, 0x00};
+
char *name;
unsigned char st[5];
int ioaddr[2];
struct sb1000_private *lp = netdev_priv(dev);
- const unsigned char Command0[6] = {0x80, 0x26, 0x00, 0x00, 0x00, 0x00};
const int ErrorDpcCounterInitialize = 200;
ioaddr[0] = dev->base_addr;
@@ -1077,14 +1087,15 @@ sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* SB1000 interrupt handler. */
static irqreturn_t sb1000_interrupt(int irq, void *dev_id)
{
+ static const unsigned char Command0[6] = {0x80, 0x2c, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
+
char *name;
unsigned char st;
int ioaddr[2];
struct net_device *dev = dev_id;
struct sb1000_private *lp = netdev_priv(dev);
- const unsigned char Command0[6] = {0x80, 0x2c, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
const int MaxRxErrorCount = 6;
ioaddr[0] = dev->base_addr;
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 7b53d658e33712fa65d11e4932e260a6a8c3beca..888b7dec98663ae0bf4c66d480da3f11cd50495e 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2374,7 +2374,7 @@ static int sbmac_init(struct platform_device *pldev, long long base)
dev->name, base, print_mac(mac, eaddr));
sc->mii_bus.name = sbmac_mdio_string;
- sc->mii_bus.id = idx;
+ snprintf(sc->mii_bus.id, MII_BUS_ID_SIZE, "%x", idx);
sc->mii_bus.priv = sc;
sc->mii_bus.read = sbmac_mii_read;
sc->mii_bus.write = sbmac_mii_write;
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 15fcee55284e7ccd61ba8323124334b5cd5e4e21..f64a860029b7910c9a7be2996843120ca6030a01 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -311,7 +311,6 @@ struct sc92031_priv {
/* for dev->get_stats */
long rx_value;
- struct net_device_stats stats;
};
/* I don't know which registers can be safely read; however, I can guess
@@ -421,7 +420,7 @@ static void _sc92031_tx_clear(struct net_device *dev)
while (priv->tx_head - priv->tx_tail > 0) {
priv->tx_tail++;
- priv->stats.tx_dropped++;
+ dev->stats.tx_dropped++;
}
priv->tx_head = priv->tx_tail = 0;
}
@@ -676,27 +675,27 @@ static void _sc92031_tx_tasklet(struct net_device *dev)
priv->tx_tail++;
if (tx_status & TxStatOK) {
- priv->stats.tx_bytes += tx_status & 0x1fff;
- priv->stats.tx_packets++;
+ dev->stats.tx_bytes += tx_status & 0x1fff;
+ dev->stats.tx_packets++;
/* Note: TxCarrierLost is always asserted at 100mbps. */
- priv->stats.collisions += (tx_status >> 22) & 0xf;
+ dev->stats.collisions += (tx_status >> 22) & 0xf;
}
if (tx_status & (TxOutOfWindow | TxAborted)) {
- priv->stats.tx_errors++;
+ dev->stats.tx_errors++;
if (tx_status & TxAborted)
- priv->stats.tx_aborted_errors++;
+ dev->stats.tx_aborted_errors++;
if (tx_status & TxCarrierLost)
- priv->stats.tx_carrier_errors++;
+ dev->stats.tx_carrier_errors++;
if (tx_status & TxOutOfWindow)
- priv->stats.tx_window_errors++;
+ dev->stats.tx_window_errors++;
}
if (tx_status & TxUnderrun)
- priv->stats.tx_fifo_errors++;
+ dev->stats.tx_fifo_errors++;
}
if (priv->tx_tail != old_tx_tail)
@@ -704,27 +703,29 @@ static void _sc92031_tx_tasklet(struct net_device *dev)
netif_wake_queue(dev);
}
-static void _sc92031_rx_tasklet_error(u32 rx_status,
- struct sc92031_priv *priv, unsigned rx_size)
+static void _sc92031_rx_tasklet_error(struct net_device *dev,
+ u32 rx_status, unsigned rx_size)
{
if(rx_size > (MAX_ETH_FRAME_SIZE + 4) || rx_size < 16) {
- priv->stats.rx_errors++;
- priv->stats.rx_length_errors++;
+ dev->stats.rx_errors++;
+ dev->stats.rx_length_errors++;
}
if (!(rx_status & RxStatesOK)) {
- priv->stats.rx_errors++;
+ dev->stats.rx_errors++;
if (rx_status & (RxHugeFrame | RxSmallFrame))
- priv->stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
if (rx_status & RxBadAlign)
- priv->stats.rx_frame_errors++;
+ dev->stats.rx_frame_errors++;
if (!(rx_status & RxCRCOK))
- priv->stats.rx_crc_errors++;
- } else
+ dev->stats.rx_crc_errors++;
+ } else {
+ struct sc92031_priv *priv = netdev_priv(dev);
priv->rx_loss++;
+ }
}
static void _sc92031_rx_tasklet(struct net_device *dev)
@@ -783,7 +784,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
|| rx_size > (MAX_ETH_FRAME_SIZE + 4)
|| rx_size < 16
|| !(rx_status & RxStatesOK))) {
- _sc92031_rx_tasklet_error(rx_status, priv, rx_size);
+ _sc92031_rx_tasklet_error(dev, rx_status, rx_size);
break;
}
@@ -795,7 +796,7 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
rx_len -= rx_size_align + 4;
- skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
+ skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
if (unlikely(!skb)) {
if (printk_ratelimit())
printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
@@ -818,11 +819,11 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
dev->last_rx = jiffies;
netif_rx(skb);
- priv->stats.rx_bytes += pkt_size;
- priv->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
if (rx_status & Rx_Multicast)
- priv->stats.multicast++;
+ dev->stats.multicast++;
next:
rx_ring_offset = (rx_ring_offset + rx_size_align) % RX_BUF_LEN;
@@ -835,13 +836,11 @@ static void _sc92031_rx_tasklet(struct net_device *dev)
static void _sc92031_link_tasklet(struct net_device *dev)
{
- struct sc92031_priv *priv = netdev_priv(dev);
-
if (_sc92031_check_media(dev))
netif_wake_queue(dev);
else {
netif_stop_queue(dev);
- priv->stats.tx_carrier_errors++;
+ dev->stats.tx_carrier_errors++;
}
}
@@ -866,11 +865,11 @@ static void sc92031_tasklet(unsigned long data)
_sc92031_rx_tasklet(dev);
if (intr_status & RxOverflow)
- priv->stats.rx_errors++;
+ dev->stats.rx_errors++;
if (intr_status & TimeOut) {
- priv->stats.rx_errors++;
- priv->stats.rx_length_errors++;
+ dev->stats.rx_errors++;
+ dev->stats.rx_length_errors++;
}
if (intr_status & (LinkFail | LinkOK))
@@ -936,38 +935,36 @@ static struct net_device_stats *sc92031_get_stats(struct net_device *dev)
if (temp == 0xffff) {
priv->rx_value += temp;
- priv->stats.rx_fifo_errors = priv->rx_value;
- } else {
- priv->stats.rx_fifo_errors = temp + priv->rx_value;
- }
+ dev->stats.rx_fifo_errors = priv->rx_value;
+ } else
+ dev->stats.rx_fifo_errors = temp + priv->rx_value;
spin_unlock_bh(&priv->lock);
}
- return &priv->stats;
+ return &dev->stats;
}
static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- int err = 0;
struct sc92031_priv *priv = netdev_priv(dev);
void __iomem *port_base = priv->port_base;
-
unsigned len;
unsigned entry;
u32 tx_status;
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+
if (unlikely(skb->len > TX_BUF_SIZE)) {
- err = -EMSGSIZE;
- priv->stats.tx_dropped++;
+ dev->stats.tx_dropped++;
goto out;
}
spin_lock(&priv->lock);
if (unlikely(!netif_carrier_ok(dev))) {
- err = -ENOLINK;
- priv->stats.tx_dropped++;
+ dev->stats.tx_dropped++;
goto out_unlock;
}
@@ -978,11 +975,6 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev)
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
len = skb->len;
- if (unlikely(len < ETH_ZLEN)) {
- memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
- 0, ETH_ZLEN - len);
- len = ETH_ZLEN;
- }
wmb();
@@ -1009,7 +1001,7 @@ out_unlock:
out:
dev_kfree_skb(skb);
- return err;
+ return NETDEV_TX_OK;
}
static int sc92031_open(struct net_device *dev)
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
deleted file mode 100644
index afd900d5d730e81d32353ecd5882415ab6047d48..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/Makefile
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# Makefile for the SysKonnect SK-98xx device driver.
-#
-
-
-#
-# Standalone driver params
-# SKPARAM += -DSK_KERNEL_24
-# SKPARAM += -DSK_KERNEL_24_26
-# SKPARAM += -DSK_KERNEL_26
-# SKPARAM += -DSK_KERNEL_22_24
-
-obj-$(CONFIG_SK98LIN) += sk98lin.o
-sk98lin-objs := \
- skge.o \
- skethtool.o \
- skdim.o \
- skaddr.o \
- skgehwt.o \
- skgeinit.o \
- skgepnmi.o \
- skgesirq.o \
- ski2c.o \
- sklm80.o \
- skqueue.o \
- skrlmt.o \
- sktimer.o \
- skvpd.o \
- skxmac2.o
-
-# DBGDEF = \
-# -DDEBUG
-
-ifdef DEBUG
-DBGDEF += \
--DSK_DEBUG_CHKMOD=0x00000000L \
--DSK_DEBUG_CHKCAT=0x00000000L
-endif
-
-
-# **** possible debug modules for SK_DEBUG_CHKMOD *****************
-# SK_DBGMOD_MERR 0x00000001L /* general module error indication */
-# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
-# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
-# SK_DBGMOD_VPD 0x00000008L /* VPD module */
-# SK_DBGMOD_I2C 0x00000010L /* I2C module */
-# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
-# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
-# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
-# SK_DBGMOD_DRV 0x00010000L /* DRV module */
-
-# **** possible debug categories for SK_DEBUG_CHKCAT **************
-# *** common modules ***
-# SK_DBGCAT_INIT 0x00000001L module/driver initialization
-# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL)
-# SK_DBGCAT_ERR 0x00000004L error handling paths
-# SK_DBGCAT_TX 0x00000008L transmit path
-# SK_DBGCAT_RX 0x00000010L receive path
-# SK_DBGCAT_IRQ 0x00000020L general IRQ handling
-# SK_DBGCAT_QUEUE 0x00000040L any queue management
-# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump
-# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump
-
-# *** driver (file skge.c) ***
-# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points
-# SK_DBGCAT_DRV_??? 0x00020000 not used
-# SK_DBGCAT_DRV_MCA 0x00040000 multicast
-# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path
-# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path
-# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime
-# SK_DBGCAT_DRV_??? 0x00400000 not used
-# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode
-# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames
-# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions
-# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
-# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
-
-EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
-
-clean:
- rm -f core *.o *.a *.s
-
-
-
-
-
-
diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h
deleted file mode 100644
index 4e2dbbf78000121c38403bb7d68f7dac6fc4d8ab..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/lm80.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/******************************************************************************
- *
- * Name: lm80.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.6 $
- * Date: $Date: 2003/05/13 17:26:52 $
- * Purpose: Contains all defines for the LM80 Chip
- * (National Semiconductor).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_LM80_H
-#define __INC_LM80_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/* defines ********************************************************************/
-
-/*
- * LM80 register definition
- *
- * All registers are 8 bit wide
- */
-#define LM80_CFG 0x00 /* Configuration Register */
-#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */
-#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */
-#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */
-#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */
-#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */
-#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */
- /* 0x07 - 0x1f reserved */
- /* current values */
-#define LM80_VT0_IN 0x20 /* current Voltage 0 value */
-#define LM80_VT1_IN 0x21 /* current Voltage 1 value */
-#define LM80_VT2_IN 0x22 /* current Voltage 2 value */
-#define LM80_VT3_IN 0x23 /* current Voltage 3 value */
-#define LM80_VT4_IN 0x24 /* current Voltage 4 value */
-#define LM80_VT5_IN 0x25 /* current Voltage 5 value */
-#define LM80_VT6_IN 0x26 /* current Voltage 6 value */
-#define LM80_TEMP_IN 0x27 /* current Temperature value */
-#define LM80_FAN1_IN 0x28 /* current Fan 1 count */
-#define LM80_FAN2_IN 0x29 /* current Fan 2 count */
- /* limit values */
-#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */
-#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */
-#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */
-#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */
-#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */
-#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */
-#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */
-#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */
-#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */
-#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */
-#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */
-#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */
-#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */
-#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */
-#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */
-#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */
-#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */
-#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */
-#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */
-#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */
- /* 0x3e - 0x3f reserved */
-
-/*
- * LM80 bit definitions
- */
-
-/* LM80_CFG Configuration Register */
-#define LM80_CFG_START (1<<0) /* start monitoring operation */
-#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */
-#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */
-#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */
-#define LM80_CFG_RESET (1<<4) /* signals a reset */
-#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */
-#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */
-#define LM80_CFG_INIT (1<<7) /* restore power on defaults */
-
-/* LM80_ISRC_1 Interrupt Status Register 1 */
-/* LM80_IMSK_1 Interrupt Mask Register 1 */
-#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */
-#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */
-#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */
-#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */
-#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */
-#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */
-#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */
-#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */
-
-/* LM80_ISRC_2 Interrupt Status Register 2 */
-/* LM80_IMSK_2 Interrupt Mask Register 2 */
-#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */
-#define LM80_IS_BTI (1<<1) /* state of BTI# pin */
-#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */
-#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */
-#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */
-#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */
- /* bit 6 and 7 are reserved in LM80_ISRC_2 */
-#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */
-#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */
-
-/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */
-#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */
-#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */
-#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */
-#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */
-#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/
-#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */
-
-/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */
-#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */
-#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */
-#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */
-#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/
-#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */
-#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */
-
- /* 0x07 - 0x1f reserved */
-/* LM80_VT0_IN current Voltage 0 value */
-/* LM80_VT1_IN current Voltage 1 value */
-/* LM80_VT2_IN current Voltage 2 value */
-/* LM80_VT3_IN current Voltage 3 value */
-/* LM80_VT4_IN current Voltage 4 value */
-/* LM80_VT5_IN current Voltage 5 value */
-/* LM80_VT6_IN current Voltage 6 value */
-/* LM80_TEMP_IN current temperature value */
-/* LM80_FAN1_IN current Fan 1 count */
-/* LM80_FAN2_IN current Fan 2 count */
-/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */
-/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */
-/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */
-/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */
-/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */
-/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */
-/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */
-/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */
-/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */
-/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */
-/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */
-/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */
-/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */
-/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */
-/* LM80_THOT_LIM_UP hot temperature limit (high) */
-/* LM80_THOT_LIM_LO hot temperature limit (low) */
-/* LM80_TOS_LIM_UP OS temperature limit (high) */
-/* LM80_TOS_LIM_LO OS temperature limit (low) */
-/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */
-/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */
- /* 0x3e - 0x3f reserved */
-
-#define LM80_ADDR 0x28 /* LM80 default addr */
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __INC_LM80_H */
diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
deleted file mode 100644
index 423ad063d09b35b272e97fbda41f77adbf68c559..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skaddr.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/******************************************************************************
- *
- * Name: skaddr.h
- * Project: Gigabit Ethernet Adapters, ADDR-Modul
- * Version: $Revision: 1.29 $
- * Date: $Date: 2003/05/13 16:57:24 $
- * Purpose: Header file for Address Management (MC, UC, Prom).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage multicast addresses and promiscuous mode
- * on GEnesis adapters.
- *
- * Include File Hierarchy:
- *
- * "skdrv1st.h"
- * ...
- * "sktypes.h"
- * "skqueue.h"
- * "skaddr.h"
- * ...
- * "skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKADDR_H
-#define __INC_SKADDR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */
-#define SK_MAX_ADDRS 14 /* #Addrs for exact match. */
-
-/* ----- Common return values ----- */
-
-#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */
-#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */
-#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */
-
-/* ----- Clear/Add flag bits ----- */
-
-#define SK_ADDR_PERMANENT 1 /* RLMT Address */
-
-/* ----- Additional Clear flag bits ----- */
-
-#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. */
-
-/* ----- Override flag bits ----- */
-
-#define SK_ADDR_LOGICAL_ADDRESS 0
-#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */
-#define SK_ADDR_PHYSICAL_ADDRESS 1
-#define SK_ADDR_CLEAR_LOGICAL 2
-#define SK_ADDR_SET_LOGICAL 4
-
-/* ----- Override return values ----- */
-
-#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS)
-#define SK_ADDR_DUPLICATE_ADDRESS 1
-#define SK_ADDR_MULTICAST_ADDRESS 2
-
-/* ----- Partitioning of excact match table ----- */
-
-#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */
-
-#define SK_ADDR_FIRST_MATCH_RLMT 1
-#define SK_ADDR_LAST_MATCH_RLMT 2
-#define SK_ADDR_FIRST_MATCH_DRV 3
-#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1)
-
-/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */
-
-#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */
-#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. */
-
-/* ----- Additional SkAddrMcAdd return values ----- */
-
-#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */
-#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */
-#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. */
-
-/* Promiscuous mode bits ----- */
-
-#define SK_PROM_MODE_NONE 0 /* Normal receive. */
-#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */
-#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. */
-/* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. */
-
-/* Macros */
-
-#ifdef OLD_STUFF
-#ifndef SK_ADDR_EQUAL
-/*
- * "&" instead of "&&" allows better optimization on IA-64.
- * The replacement is safe here, as all bytes exist.
- */
-#ifndef SK_ADDR_DWORD_COMPARE
-#define SK_ADDR_EQUAL(A1,A2) ( \
- (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
- (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
- (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
- (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
- (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
- (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
-#else /* SK_ADDR_DWORD_COMPARE */
-#define SK_ADDR_EQUAL(A1,A2) ( \
- (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \
- (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
-#endif /* SK_ADDR_DWORD_COMPARE */
-#endif /* SK_ADDR_EQUAL */
-#endif /* 0 */
-
-#ifndef SK_ADDR_EQUAL
-#ifndef SK_ADDR_DWORD_COMPARE
-#define SK_ADDR_EQUAL(A1,A2) ( \
- (((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \
- (((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \
- (((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \
- (((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \
- (((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \
- (((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0]))
-#else /* SK_ADDR_DWORD_COMPARE */
-#define SK_ADDR_EQUAL(A1,A2) ( \
- (*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \
- *(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \
- (*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \
- *(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0])))
-#endif /* SK_ADDR_DWORD_COMPARE */
-#endif /* SK_ADDR_EQUAL */
-
-/* typedefs *******************************************************************/
-
-typedef struct s_MacAddr {
- SK_U8 a[SK_MAC_ADDR_LEN];
-} SK_MAC_ADDR;
-
-
-/* SK_FILTER is used to ensure alignment of the filter. */
-typedef union s_InexactFilter {
- SK_U8 Bytes[8];
- SK_U64 Val; /* Dummy entry for alignment only. */
-} SK_FILTER64;
-
-
-typedef struct s_AddrNet SK_ADDR_NET;
-
-
-typedef struct s_AddrPort {
-
-/* ----- Public part (read-only) ----- */
-
- SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */
- SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */
- int PromMode; /* Promiscuous Mode. */
-
-/* ----- Private part ----- */
-
- SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */
- SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */
- SK_U8 Align01;
-
- SK_U32 FirstExactMatchRlmt;
- SK_U32 NextExactMatchRlmt;
- SK_U32 FirstExactMatchDrv;
- SK_U32 NextExactMatchDrv;
- SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES];
- SK_FILTER64 InexactFilter; /* For 64-bit hash register. */
- SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */
- SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */
-} SK_ADDR_PORT;
-
-
-struct s_AddrNet {
-/* ----- Public part (read-only) ----- */
-
- SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */
- SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */
-
-/* ----- Private part ----- */
-
- SK_U32 ActivePort; /* View of module ADDR. */
- SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */
- SK_U8 Align01;
- SK_U16 Align02;
-};
-
-
-typedef struct s_Addr {
-
-/* ----- Public part (read-only) ----- */
-
- SK_ADDR_NET Net[SK_MAX_NETS];
- SK_ADDR_PORT Port[SK_MAX_MACS];
-
-/* ----- Private part ----- */
-} SK_ADDR;
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_KR_PROTO
-
-/* Functions provided by SkAddr */
-
-/* ANSI/C++ compliant function prototypes */
-
-extern int SkAddrInit(
- SK_AC *pAC,
- SK_IOC IoC,
- int Level);
-
-extern int SkAddrMcClear(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int Flags);
-
-extern int SkAddrMcAdd(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- SK_MAC_ADDR *pMc,
- int Flags);
-
-extern int SkAddrMcUpdate(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber);
-
-extern int SkAddrOverride(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- SK_MAC_ADDR SK_FAR *pNewAddr,
- int Flags);
-
-extern int SkAddrPromiscuousChange(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 PortNumber,
- int NewPromMode);
-
-#ifndef SK_SLIM
-extern int SkAddrSwap(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 FromPortNumber,
- SK_U32 ToPortNumber);
-#endif
-
-#else /* defined(SK_KR_PROTO)) */
-
-/* Non-ANSI/C++ compliant function prototypes */
-
-#error KR-style prototypes are not yet provided.
-
-#endif /* defined(SK_KR_PROTO)) */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __INC_SKADDR_H */
diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
deleted file mode 100644
index 6e256bd9a28c72aa8b5efae047c3c2118272749e..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skcsum.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/******************************************************************************
- *
- * Name: skcsum.h
- * Project: GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
- * Version: $Revision: 1.10 $
- * Date: $Date: 2003/08/20 13:59:57 $
- * Purpose: Store/verify Internet checksum in send/receive packets.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2001 SysKonnect GmbH.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * Public header file for the "GEnesis" common module "CSUM".
- *
- * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
- * and is the code name of this SysKonnect project.
- *
- * Compilation Options:
- *
- * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
- * empty module.
- *
- * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
- * definitions. In this case, all SKCS_PROTO_xxx definitions must be made
- * external.
- *
- * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
- * definitions. In this case, all SKCS_STATUS_xxx definitions must be made
- * external.
- *
- * Include File Hierarchy:
- *
- * "h/skcsum.h"
- * "h/sktypes.h"
- * "h/skqueue.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKCSUM_H
-#define __INC_SKCSUM_H
-
-#include "h/sktypes.h"
-#include "h/skqueue.h"
-
-/* defines ********************************************************************/
-
-/*
- * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags' if no user
- * overwrite.
- */
-#ifndef SKCS_OVERWRITE_PROTO /* User overwrite? */
-#define SKCS_PROTO_IP 0x1 /* IP (Internet Protocol version 4) */
-#define SKCS_PROTO_TCP 0x2 /* TCP (Transmission Control Protocol) */
-#define SKCS_PROTO_UDP 0x4 /* UDP (User Datagram Protocol) */
-
-/* Indices for protocol statistics. */
-#define SKCS_PROTO_STATS_IP 0
-#define SKCS_PROTO_STATS_UDP 1
-#define SKCS_PROTO_STATS_TCP 2
-#define SKCS_NUM_PROTOCOLS 3 /* Number of supported protocols. */
-#endif /* !SKCS_OVERWRITE_PROTO */
-
-/*
- * Define the default SKCS_STATUS type and values if no user overwrite.
- *
- * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
- * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
- * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
- * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
- * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
- * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
- * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
- * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
- * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
- * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
- * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
- */
-#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */
-#define SKCS_STATUS int /* Define status type. */
-
-#define SKCS_STATUS_UNKNOWN_IP_VERSION 1
-#define SKCS_STATUS_IP_CSUM_ERROR 2
-#define SKCS_STATUS_IP_FRAGMENT 3
-#define SKCS_STATUS_IP_CSUM_OK 4
-#define SKCS_STATUS_TCP_CSUM_ERROR 5
-#define SKCS_STATUS_UDP_CSUM_ERROR 6
-#define SKCS_STATUS_TCP_CSUM_OK 7
-#define SKCS_STATUS_UDP_CSUM_OK 8
-/* needed for Microsoft */
-#define SKCS_STATUS_IP_CSUM_ERROR_UDP 9
-#define SKCS_STATUS_IP_CSUM_ERROR_TCP 10
-/* UDP checksum may be omitted */
-#define SKCS_STATUS_IP_CSUM_OK_NO_UDP 11
-#endif /* !SKCS_OVERWRITE_STATUS */
-
-/* Clear protocol statistics event. */
-#define SK_CSUM_EVENT_CLEAR_PROTO_STATS 1
-
-/*
- * Add two values in one's complement.
- *
- * Note: One of the two input values may be "longer" than 16-bit, but then the
- * resulting sum may be 17 bits long. In this case, add zero to the result using
- * SKCS_OC_ADD() again.
- *
- * Result = Value1 + Value2
- */
-#define SKCS_OC_ADD(Result, Value1, Value2) { \
- unsigned long Sum; \
- \
- Sum = (unsigned long) (Value1) + (unsigned long) (Value2); \
- /* Add-in any carry. */ \
- (Result) = (Sum & 0xffff) + (Sum >> 16); \
-}
-
-/*
- * Subtract two values in one's complement.
- *
- * Result = Value1 - Value2
- */
-#define SKCS_OC_SUB(Result, Value1, Value2) \
- SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff)
-
-/* typedefs *******************************************************************/
-
-/*
- * SKCS_PROTO_STATS - The CSUM protocol statistics structure.
- *
- * There is one instance of this structure for each protocol supported.
- */
-typedef struct s_CsProtocolStatistics {
- SK_U64 RxOkCts; /* Receive checksum ok. */
- SK_U64 RxUnableCts; /* Unable to verify receive checksum. */
- SK_U64 RxErrCts; /* Receive checksum error. */
- SK_U64 TxOkCts; /* Transmit checksum ok. */
- SK_U64 TxUnableCts; /* Unable to calculate checksum in hw. */
-} SKCS_PROTO_STATS;
-
-/*
- * s_Csum - The CSUM module context structure.
- */
-typedef struct s_Csum {
- /* Enabled receive SK_PROTO_XXX bit flags. */
- unsigned ReceiveFlags[SK_MAX_NETS];
-#ifdef TX_CSUM
- unsigned TransmitFlags[SK_MAX_NETS];
-#endif /* TX_CSUM */
-
- /* The protocol statistics structure; one per supported protocol. */
- SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS];
-} SK_CSUM;
-
-/*
- * SKCS_PACKET_INFO - The packet information structure.
- */
-typedef struct s_CsPacketInfo {
- /* Bit field specifiying the desired/found protocols. */
- unsigned ProtocolFlags;
-
- /* Length of complete IP header, including any option fields. */
- unsigned IpHeaderLength;
-
- /* IP header checksum. */
- unsigned IpHeaderChecksum;
-
- /* TCP/UDP pseudo header checksum. */
- unsigned PseudoHeaderChecksum;
-} SKCS_PACKET_INFO;
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_CS_CALCULATE_CHECKSUM
-extern unsigned SkCsCalculateChecksum(
- void *pData,
- unsigned Length);
-#endif /* SK_CS_CALCULATE_CHECKSUM */
-
-extern int SkCsEvent(
- SK_AC *pAc,
- SK_IOC Ioc,
- SK_U32 Event,
- SK_EVPARA Param);
-
-extern SKCS_STATUS SkCsGetReceiveInfo(
- SK_AC *pAc,
- void *pIpHeader,
- unsigned Checksum1,
- unsigned Checksum2,
- int NetNumber);
-
-extern void SkCsSetReceiveFlags(
- SK_AC *pAc,
- unsigned ReceiveFlags,
- unsigned *pChecksum1Offset,
- unsigned *pChecksum2Offset,
- int NetNumber);
-
-#endif /* __INC_SKCSUM_H */
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
deleted file mode 100644
index 3cba171d74b22a9e096faae7973e2950e094251e..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skdebug.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/******************************************************************************
- *
- * Name: skdebug.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.14 $
- * Date: $Date: 2003/05/13 17:26:00 $
- * Purpose: SK specific DEBUG support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDEBUG_H
-#define __INC_SKDEBUG_H
-
-#ifdef DEBUG
-#ifndef SK_DBG_MSG
-#define SK_DBG_MSG(pAC,comp,cat,arg) \
- if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \
- ((cat) & SK_DBG_CHKCAT(pAC)) ) { \
- SK_DBG_PRINTF arg ; \
- }
-#endif
-#else
-#define SK_DBG_MSG(pAC,comp,lev,arg)
-#endif
-
-/* PLS NOTE:
- * =========
- * Due to any restrictions of kernel printf routines do not use other
- * format identifiers as: %x %d %c %s .
- * Never use any combined format identifiers such as: %lx %ld in your
- * printf - argument (arg) because some OS specific kernel printfs may
- * only support some basic identifiers.
- */
-
-/* Debug modules */
-
-#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */
-#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
-#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
-#define SK_DBGMOD_VPD 0x00000008L /* VPD module */
-#define SK_DBGMOD_I2C 0x00000010L /* I2C module */
-#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
-#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
-#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
-#define SK_DBGMOD_PECP 0x00000100L /* PECP module */
-#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */
-
-/* Debug events */
-
-#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */
-#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */
-#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */
-#define SK_DBGCAT_TX 0x00000008L /* transmit path */
-#define SK_DBGCAT_RX 0x00000010L /* receive path */
-#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */
-#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */
-#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */
-#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */
-
-#endif /* __INC_SKDEBUG_H */
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
deleted file mode 100644
index 91b8d4f45904fa0648a45a2cf594fd0c8bc65544..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skdrv1st.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/******************************************************************************
- *
- * Name: skdrv1st.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.4 $
- * Date: $Date: 2003/11/12 14:28:14 $
- * Purpose: First header file for driver and all other modules
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the first include file of the driver, which includes all
- * neccessary system header files and some of the GEnesis header files.
- * It also defines some basic items.
- *
- * Include File Hierarchy:
- *
- * see skge.c
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDRV1ST_H
-#define __INC_SKDRV1ST_H
-
-typedef struct s_AC SK_AC;
-
-/* Set card versions */
-#define SK_FAR
-
-/* override some default functions with optimized linux functions */
-
-#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2)
-#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4)
-#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8)
-#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2)
-#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),4)
-#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),8)
-
-#define SK_ADDR_EQUAL(a1,a2) (!memcmp(a1,a2,6))
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-#include
-
-#define SK_CS_CALCULATE_CHECKSUM
-#ifndef CONFIG_X86_64
-#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff)
-#else
-#define SkCsCalculateChecksum(p,l) ((~ip_fast_csum(p, l)) & 0xffff)
-#endif
-
-#include "h/sktypes.h"
-#include "h/skerror.h"
-#include "h/skdebug.h"
-#include "h/lm80.h"
-#include "h/xmac_ii.h"
-
-#ifdef __LITTLE_ENDIAN
-#define SK_LITTLE_ENDIAN
-#else
-#define SK_BIG_ENDIAN
-#endif
-
-#define SK_NET_DEVICE net_device
-
-
-/* we use gethrtime(), return unit: nanoseconds */
-#define SK_TICKS_PER_SEC 100
-
-#define SK_MEM_MAPPED_IO
-
-// #define SK_RLMT_SLOW_LOOKAHEAD
-
-#define SK_MAX_MACS 2
-#define SK_MAX_NETS 2
-
-#define SK_IOC char __iomem *
-
-typedef struct s_DrvRlmtMbuf SK_MBUF;
-
-#define SK_CONST64 INT64_C
-#define SK_CONSTU64 UINT64_C
-
-#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size)
-#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size)
-#define SK_MEMSET(dest,val,size) memset(dest,val,size)
-#define SK_STRLEN(pStr) strlen((char*)(pStr))
-#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size)
-#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2))
-
-/* macros to access the adapter */
-#define SK_OUT8(b,a,v) writeb((v), ((b)+(a)))
-#define SK_OUT16(b,a,v) writew((v), ((b)+(a)))
-#define SK_OUT32(b,a,v) writel((v), ((b)+(a)))
-#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a)))
-#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a)))
-#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a)))
-
-#define int8_t char
-#define int16_t short
-#define int32_t long
-#define int64_t long long
-#define uint8_t u_char
-#define uint16_t u_short
-#define uint32_t u_long
-#define uint64_t unsigned long long
-#define t_scalar_t int
-#define t_uscalar_t unsigned int
-#define uintptr_t unsigned long
-
-#define __CONCAT__(A,B) A##B
-
-#define INT32_C(a) __CONCAT__(a,L)
-#define INT64_C(a) __CONCAT__(a,LL)
-#define UINT32_C(a) __CONCAT__(a,UL)
-#define UINT64_C(a) __CONCAT__(a,ULL)
-
-#ifdef DEBUG
-#define SK_DBG_PRINTF printk
-#ifndef SK_DEBUG_CHKMOD
-#define SK_DEBUG_CHKMOD 0
-#endif
-#ifndef SK_DEBUG_CHKCAT
-#define SK_DEBUG_CHKCAT 0
-#endif
-/* those come from the makefile */
-#define SK_DBG_CHKMOD(pAC) (SK_DEBUG_CHKMOD)
-#define SK_DBG_CHKCAT(pAC) (SK_DEBUG_CHKCAT)
-
-extern void SkDbgPrintf(const char *format,...);
-
-#define SK_DBGMOD_DRV 0x00010000
-
-/**** possible driver debug categories ********************************/
-#define SK_DBGCAT_DRV_ENTRY 0x00010000
-#define SK_DBGCAT_DRV_SAP 0x00020000
-#define SK_DBGCAT_DRV_MCA 0x00040000
-#define SK_DBGCAT_DRV_TX_PROGRESS 0x00080000
-#define SK_DBGCAT_DRV_RX_PROGRESS 0x00100000
-#define SK_DBGCAT_DRV_PROGRESS 0x00200000
-#define SK_DBGCAT_DRV_MSG 0x00400000
-#define SK_DBGCAT_DRV_PROM 0x00800000
-#define SK_DBGCAT_DRV_TX_FRAME 0x01000000
-#define SK_DBGCAT_DRV_ERROR 0x02000000
-#define SK_DBGCAT_DRV_INT_SRC 0x04000000
-#define SK_DBGCAT_DRV_EVENT 0x08000000
-
-#endif
-
-#define SK_ERR_LOG SkErrorLog
-
-extern void SkErrorLog(SK_AC*, int, int, char*);
-
-#endif
-
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
deleted file mode 100644
index 3fa67171e832fdfa6a6f3c0aea855b771a426ce3..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skdrv2nd.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/******************************************************************************
- *
- * Name: skdrv2nd.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.10 $
- * Date: $Date: 2003/12/11 16:04:45 $
- * Purpose: Second header file for driver and all other modules
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the second include file of the driver, which includes all other
- * neccessary files and defines all structures and constants used by the
- * driver and the common modules.
- *
- * Include File Hierarchy:
- *
- * see skge.c
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDRV2ND_H
-#define __INC_SKDRV2ND_H
-
-#include "h/skqueue.h"
-#include "h/skgehwt.h"
-#include "h/sktimer.h"
-#include "h/ski2c.h"
-#include "h/skgepnmi.h"
-#include "h/skvpd.h"
-#include "h/skgehw.h"
-#include "h/skgeinit.h"
-#include "h/skaddr.h"
-#include "h/skgesirq.h"
-#include "h/skcsum.h"
-#include "h/skrlmt.h"
-#include "h/skgedrv.h"
-
-
-extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned);
-extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*);
-extern SK_U64 SkOsGetTime(SK_AC*);
-extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
-extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*);
-extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*);
-extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16);
-extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8);
-extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
-
-#ifdef SK_DIAG_SUPPORT
-extern int SkDrvEnterDiagMode(SK_AC *pAc);
-extern int SkDrvLeaveDiagMode(SK_AC *pAc);
-#endif
-
-struct s_DrvRlmtMbuf {
- SK_MBUF *pNext; /* Pointer to next RLMT Mbuf. */
- SK_U8 *pData; /* Data buffer (virtually contig.). */
- unsigned Size; /* Data buffer size. */
- unsigned Length; /* Length of packet (<= Size). */
- SK_U32 PortIdx; /* Receiving/transmitting port. */
-#ifdef SK_RLMT_MBUF_PRIVATE
- SK_RLMT_MBUF Rlmt; /* Private part for RLMT. */
-#endif /* SK_RLMT_MBUF_PRIVATE */
- struct sk_buff *pOs; /* Pointer to message block */
-};
-
-
-/*
- * Time macros
- */
-#if SK_TICKS_PER_SEC == 100
-#define SK_PNMI_HUNDREDS_SEC(t) (t)
-#else
-#define SK_PNMI_HUNDREDS_SEC(t) ((((unsigned long)t) * 100) / \
- (SK_TICKS_PER_SEC))
-#endif
-
-/*
- * New SkOsGetTime
- */
-#define SkOsGetTimeCurrent(pAC, pUsec) {\
- struct timeval t;\
- do_gettimeofday(&t);\
- *pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\
-}
-
-
-/*
- * ioctl definitions
- */
-#define SK_IOCTL_BASE (SIOCDEVPRIVATE)
-#define SK_IOCTL_GETMIB (SK_IOCTL_BASE + 0)
-#define SK_IOCTL_SETMIB (SK_IOCTL_BASE + 1)
-#define SK_IOCTL_PRESETMIB (SK_IOCTL_BASE + 2)
-#define SK_IOCTL_GEN (SK_IOCTL_BASE + 3)
-#define SK_IOCTL_DIAG (SK_IOCTL_BASE + 4)
-
-typedef struct s_IOCTL SK_GE_IOCTL;
-
-struct s_IOCTL {
- char __user * pData;
- unsigned int Len;
-};
-
-
-/*
- * define sizes of descriptor rings in bytes
- */
-
-#define TX_RING_SIZE (8*1024)
-#define RX_RING_SIZE (24*1024)
-
-/*
- * Buffer size for ethernet packets
- */
-#define ETH_BUF_SIZE 1540
-#define ETH_MAX_MTU 1514
-#define ETH_MIN_MTU 60
-#define ETH_MULTICAST_BIT 0x01
-#define SK_JUMBO_MTU 9000
-
-/*
- * transmit priority selects the queue: LOW=asynchron, HIGH=synchron
- */
-#define TX_PRIO_LOW 0
-#define TX_PRIO_HIGH 1
-
-/*
- * alignment of rx/tx descriptors
- */
-#define DESCR_ALIGN 64
-
-/*
- * definitions for pnmi. TODO
- */
-#define SK_DRIVER_RESET(pAC, IoC) 0
-#define SK_DRIVER_SENDEVENT(pAC, IoC) 0
-#define SK_DRIVER_SELFTEST(pAC, IoC) 0
-/* For get mtu you must add an own function */
-#define SK_DRIVER_GET_MTU(pAc,IoC,i) 0
-#define SK_DRIVER_SET_MTU(pAc,IoC,i,v) 0
-#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v) 0
-
-/*
-** Interim definition of SK_DRV_TIMER placed in this file until
-** common modules have been finalized
-*/
-#define SK_DRV_TIMER 11
-#define SK_DRV_MODERATION_TIMER 1
-#define SK_DRV_MODERATION_TIMER_LENGTH 1000000 /* 1 second */
-#define SK_DRV_RX_CLEANUP_TIMER 2
-#define SK_DRV_RX_CLEANUP_TIMER_LENGTH 1000000 /* 100 millisecs */
-
-/*
-** Definitions regarding transmitting frames
-** any calculating any checksum.
-*/
-#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6
-#define C_LEN_ETHERMAC_HEADER_SRC_ADDR 6
-#define C_LEN_ETHERMAC_HEADER_LENTYPE 2
-#define C_LEN_ETHERMAC_HEADER ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \
- (C_LEN_ETHERMAC_HEADER_SRC_ADDR) + \
- (C_LEN_ETHERMAC_HEADER_LENTYPE) )
-
-#define C_LEN_ETHERMTU_MINSIZE 46
-#define C_LEN_ETHERMTU_MAXSIZE_STD 1500
-#define C_LEN_ETHERMTU_MAXSIZE_JUMBO 9000
-
-#define C_LEN_ETHERNET_MINSIZE ( (C_LEN_ETHERMAC_HEADER) + \
- (C_LEN_ETHERMTU_MINSIZE) )
-
-#define C_OFFSET_IPHEADER C_LEN_ETHERMAC_HEADER
-#define C_OFFSET_IPHEADER_IPPROTO 9
-#define C_OFFSET_TCPHEADER_TCPCS 16
-#define C_OFFSET_UDPHEADER_UDPCS 6
-
-#define C_OFFSET_IPPROTO ( (C_LEN_ETHERMAC_HEADER) + \
- (C_OFFSET_IPHEADER_IPPROTO) )
-
-#define C_PROTO_ID_UDP 17 /* refer to RFC 790 or Stevens' */
-#define C_PROTO_ID_TCP 6 /* TCP/IP illustrated for details */
-
-/* TX and RX descriptors *****************************************************/
-
-typedef struct s_RxD RXD; /* the receive descriptor */
-
-struct s_RxD {
- volatile SK_U32 RBControl; /* Receive Buffer Control */
- SK_U32 VNextRxd; /* Next receive descriptor,low dword */
- SK_U32 VDataLow; /* Receive buffer Addr, low dword */
- SK_U32 VDataHigh; /* Receive buffer Addr, high dword */
- SK_U32 FrameStat; /* Receive Frame Status word */
- SK_U32 TimeStamp; /* Time stamp from XMAC */
- SK_U32 TcpSums; /* TCP Sum 2 / TCP Sum 1 */
- SK_U32 TcpSumStarts; /* TCP Sum Start 2 / TCP Sum Start 1 */
- RXD *pNextRxd; /* Pointer to next Rxd */
- struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */
-};
-
-typedef struct s_TxD TXD; /* the transmit descriptor */
-
-struct s_TxD {
- volatile SK_U32 TBControl; /* Transmit Buffer Control */
- SK_U32 VNextTxd; /* Next transmit descriptor,low dword */
- SK_U32 VDataLow; /* Transmit Buffer Addr, low dword */
- SK_U32 VDataHigh; /* Transmit Buffer Addr, high dword */
- SK_U32 FrameStat; /* Transmit Frame Status Word */
- SK_U32 TcpSumOfs; /* Reserved / TCP Sum Offset */
- SK_U16 TcpSumSt; /* TCP Sum Start */
- SK_U16 TcpSumWr; /* TCP Sum Write */
- SK_U32 TcpReserved; /* not used */
- TXD *pNextTxd; /* Pointer to next Txd */
- struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */
-};
-
-/* Used interrupt bits in the interrupts source register *********************/
-
-#define DRIVER_IRQS ((IS_IRQ_SW) | \
- (IS_R1_F) |(IS_R2_F) | \
- (IS_XS1_F) |(IS_XA1_F) | \
- (IS_XS2_F) |(IS_XA2_F))
-
-#define SPECIAL_IRQS ((IS_HW_ERR) |(IS_I2C_READY) | \
- (IS_EXT_REG) |(IS_TIMINT) | \
- (IS_PA_TO_RX1) |(IS_PA_TO_RX2) | \
- (IS_PA_TO_TX1) |(IS_PA_TO_TX2) | \
- (IS_MAC1) |(IS_LNK_SYNC_M1)| \
- (IS_MAC2) |(IS_LNK_SYNC_M2)| \
- (IS_R1_C) |(IS_R2_C) | \
- (IS_XS1_C) |(IS_XA1_C) | \
- (IS_XS2_C) |(IS_XA2_C))
-
-#define IRQ_MASK ((IS_IRQ_SW) | \
- (IS_R1_B) |(IS_R1_F) |(IS_R2_B) |(IS_R2_F) | \
- (IS_XS1_B) |(IS_XS1_F) |(IS_XA1_B)|(IS_XA1_F)| \
- (IS_XS2_B) |(IS_XS2_F) |(IS_XA2_B)|(IS_XA2_F)| \
- (IS_HW_ERR) |(IS_I2C_READY)| \
- (IS_EXT_REG) |(IS_TIMINT) | \
- (IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \
- (IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \
- (IS_MAC1) |(IS_MAC2) | \
- (IS_R1_C) |(IS_R2_C) | \
- (IS_XS1_C) |(IS_XA1_C) | \
- (IS_XS2_C) |(IS_XA2_C))
-
-#define IRQ_HWE_MASK (IS_ERR_MSK) /* enable all HW irqs */
-
-typedef struct s_DevNet DEV_NET;
-
-struct s_DevNet {
- int PortNr;
- int NetNr;
- SK_AC *pAC;
-};
-
-typedef struct s_TxPort TX_PORT;
-
-struct s_TxPort {
- /* the transmit descriptor rings */
- caddr_t pTxDescrRing; /* descriptor area memory */
- SK_U64 VTxDescrRing; /* descr. area bus virt. addr. */
- TXD *pTxdRingHead; /* Head of Tx rings */
- TXD *pTxdRingTail; /* Tail of Tx rings */
- TXD *pTxdRingPrev; /* descriptor sent previously */
- int TxdRingFree; /* # of free entrys */
- spinlock_t TxDesRingLock; /* serialize descriptor accesses */
- SK_IOC HwAddr; /* bmu registers address */
- int PortIndex; /* index number of port (0 or 1) */
-};
-
-typedef struct s_RxPort RX_PORT;
-
-struct s_RxPort {
- /* the receive descriptor rings */
- caddr_t pRxDescrRing; /* descriptor area memory */
- SK_U64 VRxDescrRing; /* descr. area bus virt. addr. */
- RXD *pRxdRingHead; /* Head of Rx rings */
- RXD *pRxdRingTail; /* Tail of Rx rings */
- RXD *pRxdRingPrev; /* descriptor given to BMU previously */
- int RxdRingFree; /* # of free entrys */
- int RxCsum; /* use receive checksum hardware */
- spinlock_t RxDesRingLock; /* serialize descriptor accesses */
- int RxFillLimit; /* limit for buffers in ring */
- SK_IOC HwAddr; /* bmu registers address */
- int PortIndex; /* index number of port (0 or 1) */
-};
-
-/* Definitions needed for interrupt moderation *******************************/
-
-#define IRQ_EOF_AS_TX ((IS_XA1_F) | (IS_XA2_F))
-#define IRQ_EOF_SY_TX ((IS_XS1_F) | (IS_XS2_F))
-#define IRQ_MASK_TX_ONLY ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX))
-#define IRQ_MASK_RX_ONLY ((IS_R1_F) | (IS_R2_F))
-#define IRQ_MASK_SP_ONLY (SPECIAL_IRQS)
-#define IRQ_MASK_TX_RX ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY))
-#define IRQ_MASK_SP_RX ((SPECIAL_IRQS) | (IRQ_MASK_RX_ONLY))
-#define IRQ_MASK_SP_TX ((SPECIAL_IRQS) | (IRQ_MASK_TX_ONLY))
-#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS) | (IRQ_MASK_TX_RX))
-
-#define C_INT_MOD_NONE 1
-#define C_INT_MOD_STATIC 2
-#define C_INT_MOD_DYNAMIC 4
-
-#define C_CLK_FREQ_GENESIS 53215000 /* shorter: 53.125 MHz */
-#define C_CLK_FREQ_YUKON 78215000 /* shorter: 78.125 MHz */
-
-#define C_INTS_PER_SEC_DEFAULT 2000
-#define C_INT_MOD_ENABLE_PERCENTAGE 50 /* if higher 50% enable */
-#define C_INT_MOD_DISABLE_PERCENTAGE 50 /* if lower 50% disable */
-#define C_INT_MOD_IPS_LOWER_RANGE 30
-#define C_INT_MOD_IPS_UPPER_RANGE 40000
-
-
-typedef struct s_DynIrqModInfo DIM_INFO;
-struct s_DynIrqModInfo {
- unsigned long PrevTimeVal;
- unsigned int PrevSysLoad;
- unsigned int PrevUsedTime;
- unsigned int PrevTotalTime;
- int PrevUsedDescrRatio;
- int NbrProcessedDescr;
- SK_U64 PrevPort0RxIntrCts;
- SK_U64 PrevPort1RxIntrCts;
- SK_U64 PrevPort0TxIntrCts;
- SK_U64 PrevPort1TxIntrCts;
- SK_BOOL ModJustEnabled; /* Moderation just enabled yes/no */
-
- int MaxModIntsPerSec; /* Moderation Threshold */
- int MaxModIntsPerSecUpperLimit; /* Upper limit for DIM */
- int MaxModIntsPerSecLowerLimit; /* Lower limit for DIM */
-
- long MaskIrqModeration; /* ModIrqType (eg. 'TxRx') */
- SK_BOOL DisplayStats; /* Stats yes/no */
- SK_BOOL AutoSizing; /* Resize DIM-timer on/off */
- int IntModTypeSelect; /* EnableIntMod (eg. 'dynamic') */
-
- SK_TIMER ModTimer; /* just some timer */
-};
-
-typedef struct s_PerStrm PER_STRM;
-
-#define SK_ALLOC_IRQ 0x00000001
-
-#ifdef SK_DIAG_SUPPORT
-#define DIAG_ACTIVE 1
-#define DIAG_NOTACTIVE 0
-#endif
-
-/****************************************************************************
- * Per board structure / Adapter Context structure:
- * Allocated within attach(9e) and freed within detach(9e).
- * Contains all 'per device' necessary handles, flags, locks etc.:
- */
-struct s_AC {
- SK_GEINIT GIni; /* GE init struct */
- SK_PNMI Pnmi; /* PNMI data struct */
- SK_VPD vpd; /* vpd data struct */
- SK_QUEUE Event; /* Event queue */
- SK_HWT Hwt; /* Hardware Timer control struct */
- SK_TIMCTRL Tim; /* Software Timer control struct */
- SK_I2C I2c; /* I2C relevant data structure */
- SK_ADDR Addr; /* for Address module */
- SK_CSUM Csum; /* for checksum module */
- SK_RLMT Rlmt; /* for rlmt module */
- spinlock_t SlowPathLock; /* Normal IRQ lock */
- struct timer_list BlinkTimer; /* for LED blinking */
- int LedsOn;
- SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */
- int RlmtMode; /* link check mode to set */
- int RlmtNets; /* Number of nets */
-
- SK_IOC IoBase; /* register set of adapter */
- int BoardLevel; /* level of active hw init (0-2) */
-
- SK_U32 AllocFlag; /* flag allocation of resources */
- struct pci_dev *PciDev; /* for access to pci config space */
- struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */
-
- int RxBufSize; /* length of receive buffers */
- struct net_device_stats stats; /* linux 'netstat -i' statistics */
- int Index; /* internal board index number */
-
- /* adapter RAM sizes for queues of active port */
- int RxQueueSize; /* memory used for receive queue */
- int TxSQueueSize; /* memory used for sync. tx queue */
- int TxAQueueSize; /* memory used for async. tx queue */
-
- int PromiscCount; /* promiscuous mode counter */
- int AllMultiCount; /* allmulticast mode counter */
- int MulticCount; /* number of different MC */
- /* addresses for this board */
- /* (may be more than HW can)*/
-
- int HWRevision; /* Hardware revision */
- int ActivePort; /* the active XMAC port */
- int MaxPorts; /* number of activated ports */
- int TxDescrPerRing; /* # of descriptors per tx ring */
- int RxDescrPerRing; /* # of descriptors per rx ring */
-
- caddr_t pDescrMem; /* Pointer to the descriptor area */
- dma_addr_t pDescrMemDMA; /* PCI DMA address of area */
-
- /* the port structures with descriptor rings */
- TX_PORT TxPort[SK_MAX_MACS][2];
- RX_PORT RxPort[SK_MAX_MACS];
-
- SK_BOOL CheckQueue; /* check event queue soon */
- SK_TIMER DrvCleanupTimer;/* to check for pending descriptors */
- DIM_INFO DynIrqModInfo; /* all data related to DIM */
-
- /* Only for tests */
- int PortDown;
- int ChipsetType; /* Chipset family type
- * 0 == Genesis family support
- * 1 == Yukon family support
- */
-#ifdef SK_DIAG_SUPPORT
- SK_U32 DiagModeActive; /* is diag active? */
- SK_BOOL DiagFlowCtrl; /* for control purposes */
- SK_PNMI_STRUCT_DATA PnmiBackup; /* backup structure for all Pnmi-Data */
- SK_BOOL WasIfUp[SK_MAX_MACS]; /* for OpenClose while
- * DIAG is busy with NIC
- */
-#endif
-
-};
-
-
-#endif /* __INC_SKDRV2ND_H */
-
diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h
deleted file mode 100644
index da062f7662384559645741a46779cac54eabb2d1..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skerror.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/******************************************************************************
- *
- * Name: skerror.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.7 $
- * Date: $Date: 2003/05/13 17:25:13 $
- * Purpose: SK specific Error log support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _INC_SKERROR_H_
-#define _INC_SKERROR_H_
-
-/*
- * Define Error Classes
- */
-#define SK_ERRCL_OTHER (0) /* Other error */
-#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */
-#define SK_ERRCL_INIT (1L<<1) /* Initialization error */
-#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */
-#define SK_ERRCL_SW (1L<<3) /* Internal Software error */
-#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */
-#define SK_ERRCL_COMM (1L<<5) /* Communication error */
-
-
-/*
- * Define Error Code Bases
- */
-#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */
-#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */
-#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */
-#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */
-#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */
-#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */
-#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */
-#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */
-#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */
-#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */
-#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */
-
-#endif /* _INC_SKERROR_H_ */
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
deleted file mode 100644
index 44fd4c3de8184e11d020c2e6a460fb3119e4bb11..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgedrv.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/******************************************************************************
- *
- * Name: skgedrv.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.10 $
- * Date: $Date: 2003/07/04 12:25:01 $
- * Purpose: Interface with the driver
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEDRV_H_
-#define __INC_SKGEDRV_H_
-
-/* defines ********************************************************************/
-
-/*
- * Define the driver events.
- * Usually the events are defined by the destination module.
- * In case of the driver we put the definition of the events here.
- */
-#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
-#define SK_DRV_NET_UP 2 /* The net is operational */
-#define SK_DRV_NET_DOWN 3 /* The net is down */
-#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
-#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
-#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
-#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
-#define SK_DRV_PORT_FAIL 8 /* One port fails */
-#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */
-#define SK_DRV_POWER_DOWN 10 /* Power down mode */
-#define SK_DRV_TIMER 11 /* Timer for free use */
-#ifdef SK_NO_RLMT
-#define SK_DRV_LINK_UP 12 /* Link Up event for driver */
-#define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */
-#endif
-#define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */
-#endif /* __INC_SKGEDRV_H_ */
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
deleted file mode 100644
index f6282b7956db02e31625c922d40640836b4173fc..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgehw.h
+++ /dev/null
@@ -1,2126 +0,0 @@
-/******************************************************************************
- *
- * Name: skgehw.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.56 $
- * Date: $Date: 2003/09/23 09:01:00 $
- * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEHW_H
-#define __INC_SKGEHW_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/* defines ********************************************************************/
-
-#define BIT_31 (1UL << 31)
-#define BIT_30 (1L << 30)
-#define BIT_29 (1L << 29)
-#define BIT_28 (1L << 28)
-#define BIT_27 (1L << 27)
-#define BIT_26 (1L << 26)
-#define BIT_25 (1L << 25)
-#define BIT_24 (1L << 24)
-#define BIT_23 (1L << 23)
-#define BIT_22 (1L << 22)
-#define BIT_21 (1L << 21)
-#define BIT_20 (1L << 20)
-#define BIT_19 (1L << 19)
-#define BIT_18 (1L << 18)
-#define BIT_17 (1L << 17)
-#define BIT_16 (1L << 16)
-#define BIT_15 (1L << 15)
-#define BIT_14 (1L << 14)
-#define BIT_13 (1L << 13)
-#define BIT_12 (1L << 12)
-#define BIT_11 (1L << 11)
-#define BIT_10 (1L << 10)
-#define BIT_9 (1L << 9)
-#define BIT_8 (1L << 8)
-#define BIT_7 (1L << 7)
-#define BIT_6 (1L << 6)
-#define BIT_5 (1L << 5)
-#define BIT_4 (1L << 4)
-#define BIT_3 (1L << 3)
-#define BIT_2 (1L << 2)
-#define BIT_1 (1L << 1)
-#define BIT_0 1L
-
-#define BIT_15S (1U << 15)
-#define BIT_14S (1 << 14)
-#define BIT_13S (1 << 13)
-#define BIT_12S (1 << 12)
-#define BIT_11S (1 << 11)
-#define BIT_10S (1 << 10)
-#define BIT_9S (1 << 9)
-#define BIT_8S (1 << 8)
-#define BIT_7S (1 << 7)
-#define BIT_6S (1 << 6)
-#define BIT_5S (1 << 5)
-#define BIT_4S (1 << 4)
-#define BIT_3S (1 << 3)
-#define BIT_2S (1 << 2)
-#define BIT_1S (1 << 1)
-#define BIT_0S 1
-
-#define SHIFT31(x) ((x) << 31)
-#define SHIFT30(x) ((x) << 30)
-#define SHIFT29(x) ((x) << 29)
-#define SHIFT28(x) ((x) << 28)
-#define SHIFT27(x) ((x) << 27)
-#define SHIFT26(x) ((x) << 26)
-#define SHIFT25(x) ((x) << 25)
-#define SHIFT24(x) ((x) << 24)
-#define SHIFT23(x) ((x) << 23)
-#define SHIFT22(x) ((x) << 22)
-#define SHIFT21(x) ((x) << 21)
-#define SHIFT20(x) ((x) << 20)
-#define SHIFT19(x) ((x) << 19)
-#define SHIFT18(x) ((x) << 18)
-#define SHIFT17(x) ((x) << 17)
-#define SHIFT16(x) ((x) << 16)
-#define SHIFT15(x) ((x) << 15)
-#define SHIFT14(x) ((x) << 14)
-#define SHIFT13(x) ((x) << 13)
-#define SHIFT12(x) ((x) << 12)
-#define SHIFT11(x) ((x) << 11)
-#define SHIFT10(x) ((x) << 10)
-#define SHIFT9(x) ((x) << 9)
-#define SHIFT8(x) ((x) << 8)
-#define SHIFT7(x) ((x) << 7)
-#define SHIFT6(x) ((x) << 6)
-#define SHIFT5(x) ((x) << 5)
-#define SHIFT4(x) ((x) << 4)
-#define SHIFT3(x) ((x) << 3)
-#define SHIFT2(x) ((x) << 2)
-#define SHIFT1(x) ((x) << 1)
-#define SHIFT0(x) ((x) << 0)
-
-/*
- * Configuration Space header
- * Since this module is used for different OS', those may be
- * duplicate on some of them (e.g. Linux). But to keep the
- * common source, we have to live with this...
- */
-#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */
-#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */
-#define PCI_COMMAND 0x04 /* 16 bit Command */
-#define PCI_STATUS 0x06 /* 16 bit Status */
-#define PCI_REV_ID 0x08 /* 8 bit Revision ID */
-#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */
-#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */
-#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */
-#define PCI_HEADER_T 0x0e /* 8 bit Header Type */
-#define PCI_BIST 0x0f /* 8 bit Built-in selftest */
-#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
-#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
- /* Byte 0x18..0x2b: reserved */
-#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */
-#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */
-#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */
-#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */
- /* Byte 0x35..0x3b: reserved */
-#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */
-#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */
-#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */
-#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */
- /* Device Dependent Region */
-#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
-#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
- /* Power Management Region */
-#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */
-#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */
-#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */
-#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */
- /* Byte 0x4e: reserved */
-#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */
- /* VPD Region */
-#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */
-#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */
-#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */
-#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */
- /* Byte 0x58..0x59: reserved */
-#define PCI_SER_LD_CTRL 0x5a /* 16 bit SEEPROM Loader Ctrl (YUKON only) */
- /* Byte 0x5c..0xff: reserved */
-
-/*
- * I2C Address (PCI Config)
- *
- * Note: The temperature and voltage sensors are relocated on a different
- * I2C bus.
- */
-#define I2C_ADDR_VPD 0xa0 /* I2C address for the VPD EEPROM */
-
-/*
- * Define Bits and Values of the registers
- */
-/* PCI_COMMAND 16 bit Command */
- /* Bit 15..11: reserved */
-#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */
-#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */
-#define PCI_SERREN BIT_8S /* SERR enable */
-#define PCI_ADSTEP BIT_7S /* Address Stepping */
-#define PCI_PERREN BIT_6S /* Parity Report Response enable */
-#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */
-#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */
-#define PCI_SCYCEN BIT_3S /* Special Cycle enable */
-#define PCI_BMEN BIT_2S /* Bus Master enable */
-#define PCI_MEMEN BIT_1S /* Memory Space Access enable */
-#define PCI_IOEN BIT_0S /* I/O Space Access enable */
-
-#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\
- PCI_BMEN | PCI_MEMEN | PCI_IOEN)
-
-/* PCI_STATUS 16 bit Status */
-#define PCI_PERR BIT_15S /* Parity Error */
-#define PCI_SERR BIT_14S /* Signaled SERR */
-#define PCI_RMABORT BIT_13S /* Received Master Abort */
-#define PCI_RTABORT BIT_12S /* Received Target Abort */
- /* Bit 11: reserved */
-#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */
-#define PCI_DEV_FAST (0<<9) /* fast */
-#define PCI_DEV_MEDIUM (1<<9) /* medium */
-#define PCI_DEV_SLOW (2<<9) /* slow */
-#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */
-#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */
-#define PCI_UDF BIT_6S /* User Defined Features */
-#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */
-#define PCI_NEWCAP BIT_4S /* New cap. list implemented */
-#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */
- /* Bit 2.. 0: reserved */
-
-#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
- PCI_DATAPERR)
-
-/* PCI_CLASS_CODE 24 bit Class Code */
-/* Byte 2: Base Class (02) */
-/* Byte 1: SubClass (00) */
-/* Byte 0: Programming Interface (00) */
-
-/* PCI_CACHE_LSZ 8 bit Cache Line Size */
-/* Possible values: 0,2,4,8,16,32,64,128 */
-
-/* PCI_HEADER_T 8 bit Header Type */
-#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */
-#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */
-
-/* PCI_BIST 8 bit Built-in selftest */
-/* Built-in Self test not supported (optional) */
-
-/* PCI_BASE_1ST 32 bit 1st Base address */
-#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */
-#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */
-#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */
-#define PCI_PREFEN BIT_3 /* Prefetchable */
-#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */
-#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */
-#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */
-#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */
-#define PCI_MEMSPACE BIT_0 /* Memory Space Indicator */
-
-/* PCI_BASE_2ND 32 bit 2nd Base address */
-#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */
-#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */
- /* Bit 1: reserved */
-#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */
-
-/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */
-#define PCI_ROMBASE_MSK 0xfffe0000L /* Bit 31..17: ROM Base address */
-#define PCI_ROMBASE_SIZ (0x1cL<<14) /* Bit 16..14: Treat as Base or Size */
-#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */
- /* Bit 10.. 1: reserved */
-#define PCI_ROMEN BIT_0 /* Address Decode enable */
-
-/* Device Dependent Region */
-/* PCI_OUR_REG_1 32 bit Our Register 1 */
- /* Bit 31..29: reserved */
-#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode (YUKON only) */
-#define PCI_TEST_CAL BIT_27 /* Test PCI buffer calib. (YUKON only) */
-#define PCI_EN_CAL BIT_26 /* Enable PCI buffer calib. (YUKON only) */
-#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */
-#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */
-#define PCI_EN_IO BIT_23 /* Mapping to I/O space */
-#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */
- /* 1 = Map Flash to memory */
- /* 0 = Disable addr. dec */
-#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */
-#define PCI_PAGE_16 (0L<<20) /* 16 k pages */
-#define PCI_PAGE_32K (1L<<20) /* 32 k pages */
-#define PCI_PAGE_64K (2L<<20) /* 64 k pages */
-#define PCI_PAGE_128K (3L<<20) /* 128 k pages */
- /* Bit 19: reserved */
-#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */
-#define PCI_NOTAR BIT_15 /* No turnaround cycle */
-#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */
-#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */
-#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */
-#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */
-#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */
-#define PCI_BURST_DIS BIT_9 /* Burst Disable */
-#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */
-#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */
-#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */
-
-
-/* PCI_OUR_REG_2 32 bit Our Register 2 */
-#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */
-#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */
-#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */
- /* Bit 13..12: reserved */
-#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */
-#define PCI_PATCH_DIR_3 BIT_11
-#define PCI_PATCH_DIR_2 BIT_10
-#define PCI_PATCH_DIR_1 BIT_9
-#define PCI_PATCH_DIR_0 BIT_8
-#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */
-#define PCI_EXT_PATCH_3 BIT_7
-#define PCI_EXT_PATCH_2 BIT_6
-#define PCI_EXT_PATCH_1 BIT_5
-#define PCI_EXT_PATCH_0 BIT_4
-#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */
-#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */
- /* Bit 1: reserved */
-#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */
-
-
-/* Power Management Region */
-/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */
-#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */
-#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */
-#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */
-#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */
-#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */
-#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */
-#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */
-#define PCI_PM_D1_SUP BIT_9S /* D1 Support */
- /* Bit 8.. 6: reserved */
-#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */
-#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */
-#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */
-#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */
-
-/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */
-#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */
-#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */
-#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */
-#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */
- /* Bit 7.. 2: reserved */
-#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */
-
-#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */
-#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */
-#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */
-#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */
-
-/* VPD Region */
-/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
-#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */
-#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */
-
-/* Control Register File (Address Map) */
-
-/*
- * Bank 0
- */
-#define B0_RAP 0x0000 /* 8 bit Register Address Port */
- /* 0x0001 - 0x0003: reserved */
-#define B0_CTST 0x0004 /* 16 bit Control/Status register */
-#define B0_LED 0x0006 /* 8 Bit LED register */
-#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */
-#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */
-#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */
-#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */
-#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */
-#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */
- /* 0x001c: reserved */
-
-/* B0 XMAC 1 registers (GENESIS only) */
-#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/
- /* 0x0022 - 0x0027: reserved */
-#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */
- /* 0x002a - 0x002f: reserved */
-#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */
- /* 0x0032 - 0x0033: reserved */
-#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */
- /* 0x0036 - 0x003f: reserved */
-
-/* B0 XMAC 2 registers (GENESIS only) */
-#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/
- /* 0x0042 - 0x0047: reserved */
-#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */
- /* 0x004a - 0x004f: reserved */
-#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */
- /* 0x0052 - 0x0053: reserved */
-#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */
- /* 0x0056 - 0x005f: reserved */
-
-/* BMU Control Status Registers */
-#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */
-#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */
-#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
-#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/
-#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
-#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/
- /* 0x0078 - 0x007f: reserved */
-
-/*
- * Bank 1
- * - completely empty (this is the RAP Block window)
- * Note: if RAP = 1 this page is reserved
- */
-
-/*
- * Bank 2
- */
-/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
-#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */
- /* 0x0106 - 0x0107: reserved */
-#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */
- /* 0x010e - 0x010f: reserved */
-#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */
- /* 0x0116 - 0x0117: reserved */
-#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
-#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
-#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */
-#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
- /* Eprom registers are currently of no use */
-#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */
-#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */
-#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */
-#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */
-#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */
-#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */
- /* 0x0125 - 0x0127: reserved */
-#define B2_LD_CTRL 0x0128 /* 8 bit EPROM loader control register */
-#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */
- /* 0x012a - 0x012f: reserved */
-#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */
-#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */
-#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */
-#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */
- /* 0x013a - 0x013f: reserved */
-#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/
-#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
-#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
-#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
-#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
-#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
- /* 0x0154 - 0x0157: reserved */
-#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
-#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */
- /* 0x015a - 0x015b: reserved */
-#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */
-#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */
-#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */
-#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */
-#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */
-
-/* Blink Source Counter (GENESIS only) */
-#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */
-#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */
-#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */
-#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */
-#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */
- /* 0x017c - 0x017f: reserved */
-
-/*
- * Bank 3
- */
-/* RAM Random Registers */
-#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */
-#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */
-#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */
- /* 0x018c - 0x018f: reserved */
-
-/* RAM Interface Registers */
-/*
- * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
- * not usable in SW. Please notice these are NOT real timeouts, these are
- * the number of qWords transferred continuously.
- */
-#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */
-#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */
-#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */
-#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */
-#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */
-#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */
-#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */
-#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */
-#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */
-#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */
-#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/
-#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/
-#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */
- /* 0x019d - 0x019f: reserved */
-#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */
-#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */
- /* 0x01a3 - 0x01af: reserved */
-
-/* MAC Arbiter Registers (GENESIS only) */
-/* these are the no. of qWord transferred continuously and NOT real timeouts */
-#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */
-#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */
-#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */
-#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */
-#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */
-#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */
-#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */
-#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */
-#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */
-#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */
- /* 0x01bc - 0x01bf: reserved */
-#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */
-#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */
-#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */
-#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */
-#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */
-#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */
-#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */
-#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */
-#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */
-#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */
- /* 0x01cc - 0x01cf: reserved */
-
-/* Packet Arbiter Registers (GENESIS only) */
-/* these are real timeouts */
-#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */
- /* 0x01d2 - 0x01d3: reserved */
-#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */
- /* 0x01d6 - 0x01d7: reserved */
-#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */
- /* 0x01da - 0x01db: reserved */
-#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */
- /* 0x01de - 0x01df: reserved */
-#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */
- /* 0x01e2 - 0x01e3: reserved */
-#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */
- /* 0x01e6 - 0x01e7: reserved */
-#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */
- /* 0x01ea - 0x01eb: reserved */
-#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */
- /* 0x01ee - 0x01ef: reserved */
-#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */
-#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */
- /* 0x01f4 - 0x01ff: reserved */
-
-/*
- * Bank 4 - 5
- */
-/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
-#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/
-#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */
-#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */
-#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */
-#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */
-#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */
-#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */
- /* 0x0213 - 0x027f: reserved */
- /* 0x0280 - 0x0292: MAC 2 */
- /* 0x0213 - 0x027f: reserved */
-
-/*
- * Bank 6
- */
-/* External registers (GENESIS only) */
-#define B6_EXT_REG 0x0300
-
-/*
- * Bank 7
- */
-/* This is a copy of the Configuration register file (lower half) */
-#define B7_CFG_SPC 0x0380
-
-/*
- * Bank 8 - 15
- */
-/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
-#define B8_Q_REGS 0x0400
-
-/* Queue Register Offsets, use Q_ADDR() to access */
-#define Q_D 0x00 /* 8*32 bit Current Descriptor */
-#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */
-#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */
-#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */
-#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */
-#define Q_BC 0x30 /* 32 bit Current Byte Counter */
-#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */
-#define Q_F 0x38 /* 32 bit Flag Register */
-#define Q_T1 0x3c /* 32 bit Test Register 1 */
-#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */
-#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */
-#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */
-#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */
-#define Q_T2 0x40 /* 32 bit Test Register 2 */
-#define Q_T3 0x44 /* 32 bit Test Register 3 */
- /* 0x48 - 0x7f: reserved */
-
-/*
- * Bank 16 - 23
- */
-/* RAM Buffer Registers */
-#define B16_RAM_REGS 0x0800
-
-/* RAM Buffer Register Offsets, use RB_ADDR() to access */
-#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */
-#define RB_END 0x04 /* 32 bit RAM Buffer End Address */
-#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */
-#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */
-#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */
-#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */
-#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */
-#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */
- /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */
-#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */
-#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */
-#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */
-#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */
-#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */
- /* 0x2c - 0x7f: reserved */
-
-/*
- * Bank 24
- */
-/*
- * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only)
- * use MR_ADDR() to access
- */
-#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */
-#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */
- /* 0x0c08 - 0x0c0b: reserved */
-#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */
-#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */
-#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */
-#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/
-#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */
-#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */
-#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/
-#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */
-#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */
- /* 0x0c1f: reserved */
-#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */
-#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */
-#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */
-#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */
- /* 0x0c2a - 0x0c2f: reserved */
-#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */
-#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */
-#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */
-#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */
- /* 0x0c3a - 0x0c3b: reserved */
-#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */
- /* 0x0c3d - 0x0c3f: reserved */
-
-/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */
-#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */
-#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */
-#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */
-#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */
-#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */
- /* 0x0c54 - 0x0c5f: reserved */
-#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
- /* 0x0c64 - 0x0c67: reserved */
-#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
- /* 0x0c6c - 0x0c6f: reserved */
-#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
- /* 0x0c74 - 0x0c77: reserved */
-#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
- /* 0x0c7c - 0x0c7f: reserved */
-
-/*
- * Bank 25
- */
- /* 0x0c80 - 0x0cbf: MAC 2 */
- /* 0x0cc0 - 0x0cff: reserved */
-
-/*
- * Bank 26
- */
-/*
- * Transmit MAC FIFO and Transmit LED Registers (GENESIS only),
- * use MR_ADDR() to access
- */
-#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */
-#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */
-#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */
-#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */
-#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */
-#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */
-#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */
-#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */
- /* 0x0c1b: reserved */
-#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */
-#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */
-#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */
- /* 0x0d1f: reserved */
-#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */
-#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */
-#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */
-#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */
- /* 0x0d2a - 0x0d3f: reserved */
-
-/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */
-#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */
-#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
-#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */
- /* 0x0d4c - 0x0d5f: reserved */
-#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
-#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
-#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
- /* 0x0d6c - 0x0d6f: reserved */
-#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
-#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
-#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
- /* 0x0d7c - 0x0d7f: reserved */
-
-/*
- * Bank 27
- */
- /* 0x0d80 - 0x0dbf: MAC 2 */
- /* 0x0daa - 0x0dff: reserved */
-
-/*
- * Bank 28
- */
-/* Descriptor Poll Timer Registers */
-#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */
-#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */
-#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */
- /* 0x0e09: reserved */
-#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */
- /* 0x0e0b: reserved */
-
-/* Time Stamp Timer Registers (YUKON only) */
- /* 0x0e10: reserved */
-#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */
-#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */
- /* 0x0e19: reserved */
-#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */
- /* 0x0e1b - 0x0e7f: reserved */
-
-/*
- * Bank 29
- */
- /* 0x0e80 - 0x0efc: reserved */
-
-/*
- * Bank 30
- */
-/* GMAC and GPHY Control Registers (YUKON only) */
-#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */
-#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */
-#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */
- /* 0x0f09 - 0x0f0b: reserved */
-#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */
- /* 0x0f0d - 0x0f0f: reserved */
-#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */
- /* 0x0f14 - 0x0f1f: reserved */
-
-/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
-
-#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */
-
-#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */
-#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */
-#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */
-#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */
-#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */
-#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */
-
-/* use this macro to access above registers */
-#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs))
-
-
-/* WOL Pattern Length Registers (YUKON only) */
-
-#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */
-#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */
-
-/* WOL Pattern Counter Registers (YUKON only) */
-
-#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */
-#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */
- /* 0x0f40 - 0x0f7f: reserved */
-
-/*
- * Bank 31
- */
-/* 0x0f80 - 0x0fff: reserved */
-
-/*
- * Bank 32 - 33
- */
-#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */
-
-/*
- * Bank 0x22 - 0x3f
- */
-/* 0x1100 - 0x1fff: reserved */
-
-/*
- * Bank 0x40 - 0x4f
- */
-#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */
-
-/*
- * Bank 0x50 - 0x5f
- */
-
-#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */
-
-/*
- * Bank 0x60 - 0x6f
- */
-#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */
-
-/*
- * Bank 0x70 - 0x7f
- */
-#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */
-
-/*
- * Control Register Bit Definitions:
- */
-/* B0_RAP 8 bit Register Address Port */
- /* Bit 7: reserved */
-#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */
-
-/* B0_CTST 16 bit Control/Status register */
- /* Bit 15..14: reserved */
-#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */
-#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */
-#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */
-#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */
-#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */
-#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */
-#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */
-#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */
-#define CS_STOP_DONE BIT_5S /* Stop Master is finished */
-#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */
-#define CS_MRST_CLR BIT_3S /* Clear Master reset */
-#define CS_MRST_SET BIT_2S /* Set Master reset */
-#define CS_RST_CLR BIT_1S /* Clear Software reset */
-#define CS_RST_SET BIT_0S /* Set Software reset */
-
-/* B0_LED 8 Bit LED register */
- /* Bit 7.. 2: reserved */
-#define LED_STAT_ON BIT_1S /* Status LED on */
-#define LED_STAT_OFF BIT_0S /* Status LED off */
-
-/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
-#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */
-#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */
-#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */
-#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */
-#define PC_VAUX_ON BIT_3 /* Switch VAUX On */
-#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */
-#define PC_VCC_ON BIT_1 /* Switch VCC On */
-#define PC_VCC_OFF BIT_0 /* Switch VCC Off */
-
-/* B0_ISRC 32 bit Interrupt Source Register */
-/* B0_IMSK 32 bit Interrupt Mask Register */
-/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
-/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
-#define IS_ALL_MSK 0xbfffffffUL /* All Interrupt bits */
-#define IS_HW_ERR BIT_31 /* Interrupt HW Error */
- /* Bit 30: reserved */
-#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */
-#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */
-#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */
-#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */
-#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */
-#define IS_IRQ_SW BIT_24 /* SW forced IRQ */
-#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */
- /* IRQ from PHY (YUKON only) */
-#define IS_TIMINT BIT_22 /* IRQ from Timer */
-#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */
-#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */
-#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */
-#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */
-/* Receive Queue 1 */
-#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */
-#define IS_R1_F BIT_16 /* Q_R1 End of Frame */
-#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */
-/* Receive Queue 2 */
-#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */
-#define IS_R2_F BIT_13 /* Q_R2 End of Frame */
-#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */
-/* Synchronous Transmit Queue 1 */
-#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */
-#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */
-#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */
-/* Asynchronous Transmit Queue 1 */
-#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */
-#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */
-#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */
-/* Synchronous Transmit Queue 2 */
-#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */
-#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */
-#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */
-/* Asynchronous Transmit Queue 2 */
-#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */
-#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */
-#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */
-
-
-/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
-/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
-/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
-#define IS_ERR_MSK 0x00000fffL /* All Error bits */
- /* Bit 31..14: reserved */
-#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */
-#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */
-#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */
-#define IS_IRQ_STAT BIT_10 /* IRQ status exception */
-#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */
-#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */
-#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */
-#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */
-#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */
-#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */
-#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */
-#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */
-#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */
-#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */
-
-/* B2_CONN_TYP 8 bit Connector type */
-/* B2_PMD_TYP 8 bit PMD type */
-/* Values of connector and PMD type comply to SysKonnect internal std */
-
-/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
-#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */
- /* Bit 3.. 2: reserved */
-#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */
-#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/
-
-/* B2_CHIP_ID 8 bit Chip Identification Number */
-#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
-#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */
-#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */
-#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */
-
-#define CHIP_REV_YU_LITE_A1 3 /* Chip Rev. for YUKON-Lite A1,A2 */
-#define CHIP_REV_YU_LITE_A3 7 /* Chip Rev. for YUKON-Lite A3 */
-
-/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */
-#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */
-
-/* B2_LD_CTRL 8 bit EPROM loader control register */
-/* Bits are currently reserved */
-
-/* B2_LD_TEST 8 bit EPROM loader test register */
- /* Bit 7.. 4: reserved */
-#define LD_T_ON BIT_3S /* Loader Test mode on */
-#define LD_T_OFF BIT_2S /* Loader Test mode off */
-#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */
-#define LD_START BIT_0S /* Start loading FPROM */
-
-/*
- * Timer Section
- */
-/* B2_TI_CTRL 8 bit Timer control */
-/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
- /* Bit 7.. 3: reserved */
-#define TIM_START BIT_2S /* Start Timer */
-#define TIM_STOP BIT_1S /* Stop Timer */
-#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */
-
-/* B2_TI_TEST 8 Bit Timer Test */
-/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
-/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
- /* Bit 7.. 3: reserved */
-#define TIM_T_ON BIT_2S /* Test mode on */
-#define TIM_T_OFF BIT_1S /* Test mode off */
-#define TIM_T_STEP BIT_0S /* Test step */
-
-/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
-/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
- /* Bit 31..24: reserved */
-#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */
-
-/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
- /* Bit 7.. 2: reserved */
-#define DPT_START BIT_1S /* Start Descriptor Poll Timer */
-#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */
-
-/* B2_E_3 8 bit lower 4 bits used for HW self test result */
-#define B2_E3_RES_MASK 0x0f
-
-/* B2_TST_CTRL1 8 bit Test Control Register 1 */
-#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */
-#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */
-#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */
-#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */
-#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */
-#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */
-#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */
-#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */
-
-/* B2_TST_CTRL2 8 bit Test Control Register 2 */
- /* Bit 7.. 4: reserved */
- /* force the following error on the next master read/write */
-#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */
-#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */
-#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */
-#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */
-
-/* B2_GP_IO 32 bit General Purpose I/O Register */
- /* Bit 31..26: reserved */
-#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=In/1=Out */
-#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=In/1=Out */
-#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=In/1=Out */
-#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=In/1=Out */
-#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=In/1=Out */
-#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=In/1=Out */
-#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=In/1=Out */
-#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=In/1=Out */
-#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=In/1=Out */
-#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=In/1=Out */
- /* Bit 15..10: reserved */
-#define GP_IO_9 BIT_9 /* IO_9 pin */
-#define GP_IO_8 BIT_8 /* IO_8 pin */
-#define GP_IO_7 BIT_7 /* IO_7 pin */
-#define GP_IO_6 BIT_6 /* IO_6 pin */
-#define GP_IO_5 BIT_5 /* IO_5 pin */
-#define GP_IO_4 BIT_4 /* IO_4 pin */
-#define GP_IO_3 BIT_3 /* IO_3 pin */
-#define GP_IO_2 BIT_2 /* IO_2 pin */
-#define GP_IO_1 BIT_1 /* IO_1 pin */
-#define GP_IO_0 BIT_0 /* IO_0 pin */
-
-/* B2_I2C_CTRL 32 bit I2C HW Control Register */
-#define I2C_FLAG BIT_31 /* Start read/write if WR */
-#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */
-#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */
- /* Bit 8.. 5: reserved */
-#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */
-#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */
-#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */
-#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */
-#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */
-#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */
-#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */
-#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */
-#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */
-#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */
-#define I2C_STOP BIT_0 /* Interrupt I2C transfer */
-
-/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */
- /* Bit 31.. 1 reserved */
-#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */
-
-/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */
- /* Bit 7.. 3: reserved */
-#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */
-#define I2C_DATA BIT_1S /* I2C Data Port */
-#define I2C_CLK BIT_0S /* I2C Clock Port */
-
-/*
- * I2C Address
- */
-#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/
-
-
-/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
- /* Bit 7.. 2: reserved */
-#define BSC_START BIT_1S /* Start Blink Source Counter */
-#define BSC_STOP BIT_0S /* Stop Blink Source Counter */
-
-/* B2_BSC_STAT 8 bit Blink Source Counter Status */
- /* Bit 7.. 1: reserved */
-#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */
-
-/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
-#define BSC_T_ON BIT_2S /* Test mode on */
-#define BSC_T_OFF BIT_1S /* Test mode off */
-#define BSC_T_STEP BIT_0S /* Test step */
-
-
-/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
- /* Bit 31..19: reserved */
-#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
-
-/* RAM Interface Registers */
-/* B3_RI_CTRL 16 bit RAM Iface Control Register */
- /* Bit 15..10: reserved */
-#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */
-#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/
- /* Bit 7.. 2: reserved */
-#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */
-#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */
-
-/* B3_RI_TEST 8 bit RAM Iface Test Register */
- /* Bit 15.. 4: reserved */
-#define RI_T_EV BIT_3S /* Timeout Event occured */
-#define RI_T_ON BIT_2S /* Timeout Timer Test On */
-#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */
-#define RI_T_STEP BIT_0S /* Timeout Timer Step */
-
-/* MAC Arbiter Registers */
-/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */
- /* Bit 15.. 4: reserved */
-#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */
-#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */
-#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */
-#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */
-
-/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */
- /* Bit 15.. 8: reserved */
-#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */
-#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */
-#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */
-#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */
-#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */
-#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */
-#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */
-#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */
-
-/* Packet Arbiter Registers */
-/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */
- /* Bit 15..14: reserved */
-#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */
-#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */
-#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */
-#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */
-#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */
-#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */
-#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */
-#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */
-#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */
-#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */
-#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */
-#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */
-#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */
-#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */
-
-#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
- PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
-
-/* Rx/Tx Path related Arbiter Test Registers */
-/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */
-/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */
-/* B3_PA_TEST 16 bit Packet Arbiter Test Register */
-/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
-#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */
-#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */
-#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */
-#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */
-#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */
-#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */
-#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */
-#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */
-#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */
-#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */
-#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */
-#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */
-#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */
-#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */
-#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */
-#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */
-
-
-/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
-/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
-/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
-/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
-/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
- /* Bit 31..24: reserved */
-#define TXA_MAX_VAL 0x00ffffffUL/* Bit 23.. 0: Max TXA Timer/Cnt Val */
-
-/* TXA_CTRL 8 bit Tx Arbiter Control Register */
-#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */
-#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */
-#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */
-#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */
-#define TXA_START_RC BIT_3S /* Start sync Rate Control */
-#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */
-#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */
-#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */
-
-/* TXA_TEST 8 bit Tx Arbiter Test Register */
- /* Bit 7.. 6: reserved */
-#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */
-#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */
-#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */
-#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */
-#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */
-#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */
-
-/* TXA_STAT 8 bit Tx Arbiter Status Register */
- /* Bit 7.. 1: reserved */
-#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */
-
-/* Q_BC 32 bit Current Byte Counter */
- /* Bit 31..16: reserved */
-#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */
-
-/* BMU Control Status Registers */
-/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */
-/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */
-/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
-/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */
-/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
-/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */
-/* Q_CSR 32 bit BMU Control/Status Register */
- /* Bit 31..25: reserved */
-#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */
- /* Bit 23..22: reserved */
-#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */
-#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */
-#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */
-#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */
-#define CSR_HPI_RUN BIT_17 /* Release HPI SM */
-#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */
-#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */
-#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */
-#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */
-#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */
-#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */
-#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */
-#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */
-#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */
-#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */
-#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */
-#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */
-#define CSR_START BIT_4 /* Start Rx/Tx Queue */
-#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */
-#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */
-#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */
-#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */
-
-#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
- CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
- CSR_TRANS_RST)
-#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
- CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
- CSR_TRANS_RUN)
-
-/* Q_F 32 bit Flag Register */
- /* Bit 31..28: reserved */
-#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */
-#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */
-#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */
-#define F_WM_REACHED BIT_25 /* Watermark reached */
- /* reserved */
-#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */
- /* Bit 15..11: reserved */
-#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */
-
-/* Q_T1 32 bit Test Register 1 */
-/* Holds four State Machine control Bytes */
-#define SM_CTRL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */
-#define SM_CTRL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */
-#define SM_CTRL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */
-#define SM_CTRL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */
-
-/* Q_T1_TR 8 bit Test Register 1 Transfer SM */
-/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */
-/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */
-/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */
-
-/* The control status byte of each machine looks like ... */
-#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */
-#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */
-#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */
-#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */
-#define SM_STEP BIT_0S /* Step the State Machine */
-/* The encoding of the states is not supported by the Diagnostics Tool */
-
-/* Q_T2 32 bit Test Register 2 */
- /* Bit 31.. 8: reserved */
-#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */
-#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */
-#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */
-#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */
-#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */
-#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */
-#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */
-#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */
-
-/* Q_T3 32 bit Test Register 3 */
- /* Bit 31.. 7: reserved */
-#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */
- /* Bit 3: reserved */
-#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */
-
-/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
-/* RB_START 32 bit RAM Buffer Start Address */
-/* RB_END 32 bit RAM Buffer End Address */
-/* RB_WP 32 bit RAM Buffer Write Pointer */
-/* RB_RP 32 bit RAM Buffer Read Pointer */
-/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
-/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
-/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
-/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
-/* RB_PC 32 bit RAM Buffer Packet Counter */
-/* RB_LEV 32 bit RAM Buffer Level Register */
- /* Bit 31..19: reserved */
-#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
-
-/* RB_TST2 8 bit RAM Buffer Test Register 2 */
- /* Bit 7.. 4: reserved */
-#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */
-#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */
-#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */
-#define RB_PC_INC BIT_0S /* Packet Counter Increm */
-
-/* RB_TST1 8 bit RAM Buffer Test Register 1 */
- /* Bit 7: reserved */
-#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */
-#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */
-#define RB_WP_INC BIT_4S /* Write Pointer Increm */
- /* Bit 3: reserved */
-#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */
-#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */
-#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */
-
-/* RB_CTRL 8 bit RAM Buffer Control Register */
- /* Bit 7.. 6: reserved */
-#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */
-#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */
-#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */
-#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */
-#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */
-#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */
-
-
-/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
-
-/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */
-/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */
-/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */
-/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */
-/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */
-/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */
-/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */
-/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */
-/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */
-/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */
-/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */
- /* Bit 31.. 6: reserved */
-#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */
-
-/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */
- /* Bit 15..14: reserved */
-#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */
-#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */
-#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */
-#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */
-#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */
-#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */
-#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */
-#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */
-#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */
-#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */
-#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */
-#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */
-#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */
-#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */
-
-#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
-
-/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */
-#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */
- /* Bit 14: reserved */
-#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */
-#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */
-/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */
-/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */
-/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */
-/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */
-#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */
-#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */
-/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */
-/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */
-#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */
-#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */
-#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */
-#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */
-
-#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
-
-/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
-/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
- /* Bit 7: reserved */
-#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */
-#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */
-#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */
-#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */
-#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */
-#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */
-#define MFF_PC_INC BIT_0S /* Packet Counter Increment */
-
-/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
-/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
- /* Bit 7: reserved */
-#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */
-#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */
-#define MFF_WP_INC BIT_4S /* Write Pointer Increm */
- /* Bit 3: reserved */
-#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */
-#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */
-#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */
-
-/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */
-/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */
- /* Bit 7..4: reserved */
-#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */
-#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */
-#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */
-#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */
-
-
-/* Link LED Counter Registers (GENESIS only) */
-
-/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */
-/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */
-/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */
- /* Bit 7.. 3: reserved */
-#define LED_START BIT_2S /* Start Timer */
-#define LED_STOP BIT_1S /* Stop Timer */
-#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */
-#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */
-
-/* RX_LED_TST 8 bit Receive LED Cnt Test Register */
-/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */
-/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */
- /* Bit 7.. 3: reserved */
-#define LED_T_ON BIT_2S /* LED Counter Test mode On */
-#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */
-#define LED_T_STEP BIT_0S /* LED Counter Step */
-
-/* LNK_LED_REG 8 bit Link LED Register */
- /* Bit 7.. 6: reserved */
-#define LED_BLK_ON BIT_5S /* Link LED Blinking On */
-#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */
-#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */
-#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */
-#define LED_ON BIT_1S /* switch LED on */
-#define LED_OFF BIT_0S /* switch LED off */
-
-/* Receive and Transmit GMAC FIFO Registers (YUKON only) */
-
-/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */
-/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */
-/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
-/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
-/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
-/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
-/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
-/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
-/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
-/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */
-/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
-/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
-/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
-/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
-
-/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
- /* Bits 31..15: reserved */
-#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */
-#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */
-#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */
- /* Bit 11: reserved */
-#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */
-#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */
-#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */
-#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */
-#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */
-#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */
-#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */
-#define GMF_OPER_ON BIT_3 /* Operational Mode On */
-#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */
-#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */
-#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */
-
-/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */
- /* Bits 31..19: reserved */
-#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */
-#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */
-#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */
- /* Bits 15..7: same as for RX_GMF_CTRL_T */
-#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */
-#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */
-#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */
- /* Bits 3..0: same as for RX_GMF_CTRL_T */
-
-#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON)
-#define GMF_TX_CTRL_DEF GMF_OPER_ON
-
-#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */
-
-/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
- /* Bit 7.. 3: reserved */
-#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */
-#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */
-#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */
-
-/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
- /* Bits 31.. 8: reserved */
-#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */
-#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */
-#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */
-#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */
-#define GMC_PAUSE_ON BIT_3 /* Pause On */
-#define GMC_PAUSE_OFF BIT_2 /* Pause Off */
-#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */
-#define GMC_RST_SET BIT_0 /* Set GMAC Reset */
-
-/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
- /* Bits 31..29: reserved */
-#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */
-#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */
-#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */
-#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */
-#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */
-#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */
-#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */
-#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */
-#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */
-#define GPC_ANEG_0 BIT_19 /* ANEG[0] */
-#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */
-#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */
-#define GPC_ANEG_3 BIT_16 /* ANEG[3] */
-#define GPC_ANEG_2 BIT_15 /* ANEG[2] */
-#define GPC_ANEG_1 BIT_14 /* ANEG[1] */
-#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */
-#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */
-#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */
-#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */
-#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */
-#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */
- /* Bits 7..2: reserved */
-#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */
-#define GPC_RST_SET BIT_0 /* Set GPHY Reset */
-
-#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \
- GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
-
-#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \
- GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
-
-#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \
- GPC_ANEG_1 | GPC_ANEG_0)
-
-/* forced speed and duplex mode (don't mix with other ANEG bits) */
-#define GPC_FRC10MBIT_HALF 0
-#define GPC_FRC10MBIT_FULL GPC_ANEG_0
-#define GPC_FRC100MBIT_HALF GPC_ANEG_1
-#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1)
-
-/* auto-negotiation with limited advertised speeds */
-/* mix only with master/slave settings (for copper) */
-#define GPC_ADV_1000_HALF GPC_ANEG_2
-#define GPC_ADV_1000_FULL GPC_ANEG_3
-#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3)
-
-/* master/slave settings */
-/* only for copper with 1000 Mbps */
-#define GPC_FORCE_MASTER 0
-#define GPC_FORCE_SLAVE GPC_ANEG_0
-#define GPC_PREF_MASTER GPC_ANEG_1
-#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0)
-
-/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
-/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
-#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */
-#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */
-#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */
-#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */
-#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */
-#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */
-
-#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \
- GM_IS_TX_FF_UR)
-
-/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
- /* Bits 15.. 2: reserved */
-#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */
-#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */
-
-
-/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
-#define WOL_CTL_LINK_CHG_OCC BIT_15S
-#define WOL_CTL_MAGIC_PKT_OCC BIT_14S
-#define WOL_CTL_PATTERN_OCC BIT_13S
-
-#define WOL_CTL_CLEAR_RESULT BIT_12S
-
-#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S
-#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S
-#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S
-#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S
-#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S
-#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S
-
-#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S
-#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S
-#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S
-#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S
-#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S
-#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S
-
-#define WOL_CTL_DEFAULT \
- (WOL_CTL_DIS_PME_ON_LINK_CHG | \
- WOL_CTL_DIS_PME_ON_PATTERN | \
- WOL_CTL_DIS_PME_ON_MAGIC_PKT | \
- WOL_CTL_DIS_LINK_CHG_UNIT | \
- WOL_CTL_DIS_PATTERN_UNIT | \
- WOL_CTL_DIS_MAGIC_PKT_UNIT)
-
-/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
-#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x))
-
-#define SK_NUM_WOL_PATTERN 7
-#define SK_PATTERN_PER_WORD 4
-#define SK_BITMASK_PATTERN 7
-#define SK_POW_PATTERN_LENGTH 128
-
-#define WOL_LENGTH_MSK 0x7f
-#define WOL_LENGTH_SHIFT 8
-
-
-/* Receive and Transmit Descriptors ******************************************/
-
-/* Transmit Descriptor struct */
-typedef struct s_HwTxd {
- SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */
- SK_U32 TxNext; /* Physical Address Pointer to the next TxD */
- SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */
- SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */
- SK_U32 TxStat; /* Transmit Frame Status Word */
-#ifndef SK_USE_REV_DESC
- SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */
- SK_U16 TxRes1; /* 16 bit reserved field */
- SK_U16 TxTcpWp; /* TCP Checksum Write Position */
- SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */
-#else /* SK_USE_REV_DESC */
- SK_U16 TxRes1; /* 16 bit reserved field */
- SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */
- SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */
- SK_U16 TxTcpWp; /* TCP Checksum Write Position */
-#endif /* SK_USE_REV_DESC */
- SK_U32 TxRes2; /* 32 bit reserved field */
-} SK_HWTXD;
-
-/* Receive Descriptor struct */
-typedef struct s_HwRxd {
- SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */
- SK_U32 RxNext; /* Physical Address Pointer to the next RxD */
- SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */
- SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */
- SK_U32 RxStat; /* Receive Frame Status Word */
- SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */
-#ifndef SK_USE_REV_DESC
- SK_U16 RxTcpSum1; /* TCP Checksum 1 */
- SK_U16 RxTcpSum2; /* TCP Checksum 2 */
- SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
- SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */
-#else /* SK_USE_REV_DESC */
- SK_U16 RxTcpSum2; /* TCP Checksum 2 */
- SK_U16 RxTcpSum1; /* TCP Checksum 1 */
- SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */
- SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
-#endif /* SK_USE_REV_DESC */
-} SK_HWRXD;
-
-/*
- * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
- * should set the define SK_USE_REV_DESC.
- * Structures are 'normaly' not endianess dependent. But in
- * this case the SK_U16 fields are bound to bit positions inside the
- * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
- * The bit positions inside a DWord are of course endianess dependent and
- * swaps if the DWord is swapped by the hardware.
- */
-
-
-/* Descriptor Bit Definition */
-/* TxCtrl Transmit Buffer Control Field */
-/* RxCtrl Receive Buffer Control Field */
-#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */
-#define BMU_STF BIT_30 /* Start of Frame */
-#define BMU_EOF BIT_29 /* End of Frame */
-#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */
-#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */
-/* TxCtrl specific bits */
-#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */
-#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */
-#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */
-/* RxCtrl specific bits */
-#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */
-#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */
-#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */
- /* Bit 23..16: BMU Check Opcodes */
-#define BMU_CHECK (0x55L<<16) /* Default BMU check */
-#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */
-#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */
-#define BMU_BBC 0xffffL /* Bit 15.. 0: Buffer Byte Counter */
-
-/* TxStat Transmit Frame Status Word */
-/* RxStat Receive Frame Status Word */
-/*
- *Note: TxStat is reserved for ASIC loopback mode only
- *
- * The Bits of the Status words are defined in xmac_ii.h
- * (see XMR_FS bits)
- */
-
-/* macros ********************************************************************/
-
-/* Receive and Transmit Queues */
-#define Q_R1 0x0000 /* Receive Queue 1 */
-#define Q_R2 0x0080 /* Receive Queue 2 */
-#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */
-#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */
-#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */
-#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */
-
-/*
- * Macro Q_ADDR()
- *
- * Use this macro to access the Receive and Transmit Queue Registers.
- *
- * para:
- * Queue Queue to access.
- * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
- * Offs Queue register offset.
- * Values: Q_D, Q_DA_L ... Q_T2, Q_T3
- *
- * usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal)
- */
-#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs))
-
-/*
- * Macro RB_ADDR()
- *
- * Use this macro to access the RAM Buffer Registers.
- *
- * para:
- * Queue Queue to access.
- * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
- * Offs Queue register offset.
- * Values: RB_START, RB_END ... RB_LEV, RB_CTRL
- *
- * usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal)
- */
-#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs))
-
-
-/* MAC Related Registers */
-#define MAC_1 0 /* belongs to the port near the slot */
-#define MAC_2 1 /* belongs to the port far away from the slot */
-
-/*
- * Macro MR_ADDR()
- *
- * Use this macro to access a MAC Related Registers inside the ASIC.
- *
- * para:
- * Mac MAC to access.
- * Values: MAC_1, MAC_2
- * Offs MAC register offset.
- * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG,
- * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST
- *
- * usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal)
- */
-#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs))
-
-#ifdef SK_LITTLE_ENDIAN
-#define XM_WORD_LO 0
-#define XM_WORD_HI 1
-#else /* !SK_LITTLE_ENDIAN */
-#define XM_WORD_LO 1
-#define XM_WORD_HI 0
-#endif /* !SK_LITTLE_ENDIAN */
-
-
-/*
- * macros to access the XMAC (GENESIS only)
- *
- * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD)
- * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD)
- * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT)
- * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT)
- * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK)
- * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK)
- * XM_INHASH(), to read the XM_HSM_CHK register
- * XM_OUTHASH() to write the XM_HSM_CHK register
- *
- * para:
- * Mac XMAC to access values: MAC_1 or MAC_2
- * IoC I/O context needed for SK I/O macros
- * Reg XMAC Register to read or write
- * (p)Val Value or pointer to the value which should be read or written
- *
- * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value);
- */
-
-#define XMA(Mac, Reg) \
- ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1))
-
-#define XM_IN16(IoC, Mac, Reg, pVal) \
- SK_IN16((IoC), XMA((Mac), (Reg)), (pVal))
-
-#define XM_OUT16(IoC, Mac, Reg, Val) \
- SK_OUT16((IoC), XMA((Mac), (Reg)), (Val))
-
-#define XM_IN32(IoC, Mac, Reg, pVal) { \
- SK_IN16((IoC), XMA((Mac), (Reg)), \
- (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \
- SK_IN16((IoC), XMA((Mac), (Reg+2)), \
- (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \
-}
-
-#define XM_OUT32(IoC, Mac, Reg, Val) { \
- SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \
- SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\
-}
-
-/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */
-
-#define XM_INADDR(IoC, Mac, Reg, pVal) { \
- SK_U16 Word; \
- SK_U8 *pByte; \
- pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
- SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
- pByte[0] = (SK_U8)(Word & 0x00ff); \
- pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
- pByte[2] = (SK_U8)(Word & 0x00ff); \
- pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
- pByte[4] = (SK_U8)(Word & 0x00ff); \
- pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
-}
-
-#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \
- SK_U8 SK_FAR *pByte; \
- pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
- SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
- (((SK_U16)(pByte[0]) & 0x00ff) | \
- (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
- SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
- (((SK_U16)(pByte[2]) & 0x00ff) | \
- (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
- SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
- (((SK_U16)(pByte[4]) & 0x00ff) | \
- (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
-}
-
-#define XM_INHASH(IoC, Mac, Reg, pVal) { \
- SK_U16 Word; \
- SK_U8 SK_FAR *pByte; \
- pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
- SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
- pByte[0] = (SK_U8)(Word & 0x00ff); \
- pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
- pByte[2] = (SK_U8)(Word & 0x00ff); \
- pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
- pByte[4] = (SK_U8)(Word & 0x00ff); \
- pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \
- pByte[6] = (SK_U8)(Word & 0x00ff); \
- pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \
-}
-
-#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \
- SK_U8 SK_FAR *pByte; \
- pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
- SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
- (((SK_U16)(pByte[0]) & 0x00ff)| \
- (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
- SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
- (((SK_U16)(pByte[2]) & 0x00ff)| \
- (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
- SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
- (((SK_U16)(pByte[4]) & 0x00ff)| \
- (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
- SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \
- (((SK_U16)(pByte[6]) & 0x00ff)| \
- (((SK_U16)(pByte[7]) << 8) & 0xff00))); \
-}
-
-/*
- * macros to access the GMAC (YUKON only)
- *
- * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT)
- * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL)
- * GM_IN32(), to read a 32 bit register (e.g. GM_)
- * GM_OUT32(), to write a 32 bit register (e.g. GM_)
- * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L)
- * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L)
- * GM_INHASH(), to read the GM_MC_ADDR_H1 register
- * GM_OUTHASH() to write the GM_MC_ADDR_H1 register
- *
- * para:
- * Mac GMAC to access values: MAC_1 or MAC_2
- * IoC I/O context needed for SK I/O macros
- * Reg GMAC Register to read or write
- * (p)Val Value or pointer to the value which should be read or written
- *
- * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value);
- */
-
-#define GMA(Mac, Reg) \
- ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg))
-
-#define GM_IN16(IoC, Mac, Reg, pVal) \
- SK_IN16((IoC), GMA((Mac), (Reg)), (pVal))
-
-#define GM_OUT16(IoC, Mac, Reg, Val) \
- SK_OUT16((IoC), GMA((Mac), (Reg)), (Val))
-
-#define GM_IN32(IoC, Mac, Reg, pVal) { \
- SK_IN16((IoC), GMA((Mac), (Reg)), \
- (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \
- SK_IN16((IoC), GMA((Mac), (Reg+4)), \
- (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \
-}
-
-#define GM_OUT32(IoC, Mac, Reg, Val) { \
- SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \
- SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\
-}
-
-#define GM_INADDR(IoC, Mac, Reg, pVal) { \
- SK_U16 Word; \
- SK_U8 *pByte; \
- pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
- SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \
- pByte[0] = (SK_U8)(Word & 0x00ff); \
- pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \
- pByte[2] = (SK_U8)(Word & 0x00ff); \
- pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \
- pByte[4] = (SK_U8)(Word & 0x00ff); \
- pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
-}
-
-#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \
- SK_U8 SK_FAR *pByte; \
- pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
- SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \
- (((SK_U16)(pByte[0]) & 0x00ff) | \
- (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
- SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \
- (((SK_U16)(pByte[2]) & 0x00ff) | \
- (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
- SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \
- (((SK_U16)(pByte[4]) & 0x00ff) | \
- (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
-}
-
-#define GM_INHASH(IoC, Mac, Reg, pVal) { \
- SK_U16 Word; \
- SK_U8 *pByte; \
- pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
- SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \
- pByte[0] = (SK_U8)(Word & 0x00ff); \
- pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \
- pByte[2] = (SK_U8)(Word & 0x00ff); \
- pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \
- pByte[4] = (SK_U8)(Word & 0x00ff); \
- pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
- SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \
- pByte[6] = (SK_U8)(Word & 0x00ff); \
- pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \
-}
-
-#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \
- SK_U8 *pByte; \
- pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
- SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \
- (((SK_U16)(pByte[0]) & 0x00ff)| \
- (((SK_U16)(pByte[1]) << 8) & 0xff00))); \
- SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \
- (((SK_U16)(pByte[2]) & 0x00ff)| \
- (((SK_U16)(pByte[3]) << 8) & 0xff00))); \
- SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \
- (((SK_U16)(pByte[4]) & 0x00ff)| \
- (((SK_U16)(pByte[5]) << 8) & 0xff00))); \
- SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \
- (((SK_U16)(pByte[6]) & 0x00ff)| \
- (((SK_U16)(pByte[7]) << 8) & 0xff00))); \
-}
-
-/*
- * Different MAC Types
- */
-#define SK_MAC_XMAC 0 /* Xaqti XMAC II */
-#define SK_MAC_GMAC 1 /* Marvell GMAC */
-
-/*
- * Different PHY Types
- */
-#define SK_PHY_XMAC 0 /* integrated in XMAC II */
-#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */
-#define SK_PHY_LONE 2 /* Level One LXT1000 */
-#define SK_PHY_NAT 3 /* National DP83891 */
-#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */
-#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */
-
-/*
- * PHY addresses (bits 12..8 of PHY address reg)
- */
-#define PHY_ADDR_XMAC (0<<8)
-#define PHY_ADDR_BCOM (1<<8)
-#define PHY_ADDR_LONE (3<<8)
-#define PHY_ADDR_NAT (0<<8)
-
-/* GPHY address (bits 15..11 of SMI control reg) */
-#define PHY_ADDR_MARV 0
-
-/*
- * macros to access the PHY
- *
- * PHY_READ() read a 16 bit value from the PHY
- * PHY_WRITE() write a 16 bit value to the PHY
- *
- * para:
- * IoC I/O context needed for SK I/O macros
- * pPort Pointer to port struct for PhyAddr
- * Mac XMAC to access values: MAC_1 or MAC_2
- * PhyReg PHY Register to read or write
- * (p)Val Value or pointer to the value which should be read or
- * written.
- *
- * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
- * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never
- * comes back. This is checked in DEBUG mode.
- */
-#ifndef DEBUG
-#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
- SK_U16 Mmu; \
- \
- XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
- XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
- if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
- XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
- } while ((Mmu & XM_MMU_PHY_RDY) == 0); \
- XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
- } \
-}
-#else
-#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
- SK_U16 Mmu; \
- int __i = 0; \
- \
- XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
- XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
- if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
- XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
- __i++; \
- if (__i > 100000) { \
- SK_DBG_PRINTF("*****************************\n"); \
- SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \
- SK_DBG_PRINTF("*****************************\n"); \
- break; \
- } \
- } while ((Mmu & XM_MMU_PHY_RDY) == 0); \
- XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
- } \
-}
-#endif /* DEBUG */
-
-#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \
- SK_U16 Mmu; \
- \
- if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
- XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
- } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
- } \
- XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
- XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \
- if ((pPort)->PhyType != SK_PHY_XMAC) { \
- do { \
- XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
- } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
- } \
-}
-
-/*
- * Macro PCI_C()
- *
- * Use this macro to access PCI config register from the I/O space.
- *
- * para:
- * Addr PCI configuration register to access.
- * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG,
- *
- * usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal);
- */
-#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */
-
-/*
- * Macro SK_HW_ADDR(Base, Addr)
- *
- * Calculates the effective HW address
- *
- * para:
- * Base I/O or memory base address
- * Addr Address offset
- *
- * usage: May be used in SK_INxx and SK_OUTxx macros
- * #define SK_IN8(pAC, Addr, pVal) ...\
- * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr)))
- */
-#ifdef SK_MEM_MAPPED_IO
-#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr))
-#else /* SK_MEM_MAPPED_IO */
-#define SK_HW_ADDR(Base, Addr) \
- ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0)))
-#endif /* SK_MEM_MAPPED_IO */
-
-#define SZ_LONG (sizeof(SK_U32))
-
-/*
- * Macro SK_HWAC_LINK_LED()
- *
- * Use this macro to set the link LED mode.
- * para:
- * pAC Pointer to adapter context struct
- * IoC I/O context needed for SK I/O macros
- * Port Port number
- * Mode Mode to set for this LED
- */
-#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
- SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode);
-
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __INC_SKGEHW_H */
diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h
deleted file mode 100644
index e6b0016a695ca7b611b1d3f15a87edde0f966b73..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgehwt.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/******************************************************************************
- *
- * Name: skhwt.h
- * Project: Gigabit Ethernet Adapters, Event Scheduler Module
- * Version: $Revision: 1.7 $
- * Date: $Date: 2003/09/16 12:55:08 $
- * Purpose: Defines for the hardware timer functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEHWT.H contains all defines and types for the timer functions
- */
-
-#ifndef _SKGEHWT_H_
-#define _SKGEHWT_H_
-
-/*
- * SK Hardware Timer
- * - needed wherever the HWT module is used
- * - use in Adapters context name pAC->Hwt
- */
-typedef struct s_Hwt {
- SK_U32 TStart; /* HWT start */
- SK_U32 TStop; /* HWT stop */
- int TActive; /* HWT: flag : active/inactive */
-} SK_HWT;
-
-extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
-extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
-extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
-extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc);
-extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
-#endif /* _SKGEHWT_H_ */
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
deleted file mode 100644
index d9b6f6d8dfe2907c2c30962bc62afabc6d5315a6..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgei2c.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/******************************************************************************
- *
- * Name: skgei2c.h
- * Project: Gigabit Ethernet Adapters, TWSI-Module
- * Version: $Revision: 1.25 $
- * Date: $Date: 2003/10/20 09:06:05 $
- * Purpose: Special defines for TWSI
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling
- */
-
-#ifndef _INC_SKGEI2C_H_
-#define _INC_SKGEI2C_H_
-
-/*
- * Macros to access the B2_I2C_CTRL
- */
-#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \
- SK_OUT32(IoC, B2_I2C_CTRL,\
- (flag ? 0x80000000UL : 0x0L) | \
- (((SK_U32)reg << 16) & I2C_ADDR) | \
- (((SK_U32)dev << 9) & I2C_DEV_SEL) | \
- (dev_size & I2C_DEV_SIZE) | \
- ((burst << 4) & I2C_BURST_LEN))
-
-#define SK_I2C_STOP(IoC) { \
- SK_U32 I2cCtrl; \
- SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \
- SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \
-}
-
-#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
-
-/*
- * Macros to access the TWSI SW Registers
- */
-#define SK_I2C_SET_BIT(IoC, SetBits) { \
- SK_U8 OrgBits; \
- SK_IN8(IoC, B2_I2C_SW, &OrgBits); \
- SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \
-}
-
-#define SK_I2C_CLR_BIT(IoC, ClrBits) { \
- SK_U8 OrgBits; \
- SK_IN8(IoC, B2_I2C_SW, &OrgBits); \
- SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \
-}
-
-#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw)
-
-/*
- * define the possible sensor states
- */
-#define SK_SEN_IDLE 0 /* Idle: sensor not read */
-#define SK_SEN_VALUE 1 /* Value Read cycle */
-#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */
-
-/*
- * Conversion factor to convert read Voltage sensor to milli Volt
- * Conversion factor to convert read Temperature sensor to 10th degree Celsius
- */
-#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */
-#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */
-#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for ext. val. */
-
-/*
- * formula: counter = (22500*60)/(rpm * divisor * pulses/2)
- * assuming: 6500rpm, 4 pulses, divisor 1
- */
-#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2))
-
-/*
- * Define sensor management data
- * Maximum is reached on Genesis copper dual port and Yukon-64
- * Board specific maximum is in pAC->I2c.MaxSens
- */
-#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */
-#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */
-
-/*
- * To watch the state machine (SM) use the timer in two ways
- * instead of one as hitherto
- */
-#define SK_TIMER_WATCH_SM 0 /* Watch the SM to finish in a spec. time */
-#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */
-
-/*
- * Defines for the individual thresholds
- */
-
-/* Temperature sensor */
-#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */
-#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */
-#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */
-#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */
-
-/* VCC which should be 5 V */
-#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */
-#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */
-#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */
-#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */
-
-/*
- * VIO may be 5 V or 3.3 V. Initialization takes two parts:
- * 1. Initialize lowest lower limit and highest higher limit.
- * 2. After the first value is read correct the upper or the lower limit to
- * the appropriate C constant.
- *
- * Warning limits are +-5% of the exepected voltage.
- * Error limits are +-10% of the expected voltage.
- */
-
-/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
-
-#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */
-#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */
- /* 5000 mVolt */
-#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */
-#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */
-
-#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */
-
-/* correction values for the second pass */
-#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */
-#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */
- /* 3300 mVolt */
-#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */
-#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */
-
-/*
- * VDD voltage
- */
-#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */
-#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */
-#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */
-#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */
-
-/*
- * PHY PLL 3V3 voltage
- */
-#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */
-#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */
-#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */
-#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */
-
-/*
- * VAUX (YUKON only)
- */
-#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */
-#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */
-#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */
-#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */
-#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */
-#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */
-
-/*
- * PHY 2V5 voltage
- */
-#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */
-#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */
-#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */
-#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */
-
-/*
- * ASIC Core 1V5 voltage (YUKON only)
- */
-#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */
-#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */
-#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */
-#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */
-
-/*
- * FAN 1 speed
- */
-/* assuming: 6500rpm +-15%, 4 pulses,
- * warning at: 80 %
- * error at: 70 %
- * no upper limit
- */
-#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */
-#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */
-#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */
-#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */
-
-/*
- * Some Voltages need dynamic thresholds
- */
-#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */
-#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */
-#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */
-
-extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
-#endif /* n_INC_SKGEI2C_H */
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
deleted file mode 100644
index 143e635ec24db054719ecde1f738682315f6b11c..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgeinit.h
+++ /dev/null
@@ -1,797 +0,0 @@
-/******************************************************************************
- *
- * Name: skgeinit.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.83 $
- * Date: $Date: 2003/09/16 14:07:37 $
- * Purpose: Structures and prototypes for the GE Init Module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEINIT_H_
-#define __INC_SKGEINIT_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_TEST_VAL 0x11335577UL
-
-/* modifying Link LED behaviour (used with SkGeLinkLED()) */
-#define SK_LNK_OFF LED_OFF
-#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
-#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
-#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON)
-#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
-
-/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
-#define SK_LED_OFF LED_OFF
-#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
-#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
-
-/* addressing LED Registers in SkGeXmitLED() */
-#define XMIT_LED_INI 0
-#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI)
-#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI)
-#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI)
-
-/* parameter 'Mode' when calling SkGeXmitLED() */
-#define SK_LED_DIS 0
-#define SK_LED_ENA 1
-#define SK_LED_TST 2
-
-/* Counter and Timer constants, for a host clock of 62.5 MHz */
-#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */
-#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */
-
-#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */
-
-#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */
- /* 215 ms at 78.12 MHz */
-
-#define SK_FACT_62 100 /* is given in percent */
-#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */
-#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */
-
-/* Timeout values */
-#define SK_MAC_TO_53 72 /* MAC arbiter timeout */
-#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */
-#define SK_PKT_TO_MAX 0xffff /* Maximum value */
-#define SK_RI_TO_53 36 /* RAM interface timeout */
-
-#define SK_PHY_ACC_TO 600000 /* PHY access timeout */
-
-/* RAM Buffer High Pause Threshold values */
-#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */
-#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
-#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
-
-#ifndef SK_BMU_RX_WM
-#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */
-#endif
-#ifndef SK_BMU_TX_WM
-#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */
-#endif
-
-/* XMAC II Rx High Watermark */
-#define SK_XM_RX_HI_WM 0x05aa /* 1450 */
-
-/* XMAC II Tx Threshold */
-#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */
-#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */
-#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */
-#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */
-
-/* values for GIPortUsage */
-#define SK_RED_LINK 1 /* redundant link usage */
-#define SK_MUL_LINK 2 /* multiple link usage */
-#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */
-
-/* Minimum RAM Buffer Rx Queue Size */
-#define SK_MIN_RXQ_SIZE 16 /* 16 kB */
-
-/* Minimum RAM Buffer Tx Queue Size */
-#define SK_MIN_TXQ_SIZE 16 /* 16 kB */
-
-/* Queue Size units */
-#define QZ_UNITS 0x7
-#define QZ_STEP 8
-
-/* Percentage of queue size from whole memory */
-/* 80 % for receive */
-#define RAM_QUOTA_RX 80L
-/* 0% for sync transfer */
-#define RAM_QUOTA_SYNC 0L
-/* the rest (20%) is taken for async transfer */
-
-/* Get the rounded queue size in Bytes in 8k steps */
-#define ROUND_QUEUE_SIZE(SizeInBytes) \
- ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \
- ~(QZ_STEP-1))
-
-/* Get the rounded queue size in KBytes in 8k steps */
-#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
- ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
-
-/* Types of RAM Buffer Queues */
-#define SK_RX_SRAM_Q 1 /* small receive queue */
-#define SK_RX_BRAM_Q 2 /* big receive queue */
-#define SK_TX_RAM_Q 3 /* small or big transmit queue */
-
-/* parameter 'Dir' when calling SkGeStopPort() */
-#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */
-#define SK_STOP_RX 2 /* Stops the receive path */
-#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */
-
-/* parameter 'RstMode' when calling SkGeStopPort() */
-#define SK_SOFT_RST 1 /* perform a software reset */
-#define SK_HARD_RST 2 /* perform a hardware reset */
-
-/* Init Levels */
-#define SK_INIT_DATA 0 /* Init level 0: init data structures */
-#define SK_INIT_IO 1 /* Init level 1: init with IOs */
-#define SK_INIT_RUN 2 /* Init level 2: init for run time */
-
-/* Link Mode Parameter */
-#define SK_LMODE_HALF 1 /* Half Duplex Mode */
-#define SK_LMODE_FULL 2 /* Full Duplex Mode */
-#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */
-#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */
-#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */
-#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */
-#define SK_LMODE_INDETERMINATED 7 /* indeterminated */
-
-/* Auto-negotiation timeout in 100ms granularity */
-#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */
-
-/* Auto-negotiation error codes */
-#define SK_AND_OK 0 /* no error */
-#define SK_AND_OTHER 1 /* other error than below */
-#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */
-
-
-/* Link Speed Capabilities */
-#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */
-#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */
-#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */
-#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */
-#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
-
-/* Link Speed Parameter */
-#define SK_LSPEED_AUTO 1 /* Automatic resolution */
-#define SK_LSPEED_10MBPS 2 /* 10 Mbps */
-#define SK_LSPEED_100MBPS 3 /* 100 Mbps */
-#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */
-#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */
-
-/* Link Speed Current State */
-#define SK_LSPEED_STAT_UNKNOWN 1
-#define SK_LSPEED_STAT_10MBPS 2
-#define SK_LSPEED_STAT_100MBPS 3
-#define SK_LSPEED_STAT_1000MBPS 4
-#define SK_LSPEED_STAT_INDETERMINATED 5
-
-
-/* Link Capability Parameter */
-#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */
-#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */
-#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */
-#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */
-#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
-
-/* Link Mode Current State */
-#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */
-#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */
-#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */
-#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */
-#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */
-#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */
-
-/* Flow Control Mode Parameter (and capabilities) */
-#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */
-#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */
-#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */
-#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or
- * just the remote station may send PAUSE
- */
-#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */
-
-/* Flow Control Status Parameter */
-#define SK_FLOW_STAT_NONE 1 /* No Flow Control */
-#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */
-#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */
-#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */
-#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */
-
-/* Master/Slave Mode Capabilities */
-#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */
-#define SK_MS_CAP_MASTER (1<<1) /* This station is master */
-#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */
-#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */
-
-/* Set Master/Slave Mode Parameter (and capabilities) */
-#define SK_MS_MODE_AUTO 1 /* Automatic resolution */
-#define SK_MS_MODE_MASTER 2 /* This station is master */
-#define SK_MS_MODE_SLAVE 3 /* This station is slave */
-#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */
-
-/* Master/Slave Status Parameter */
-#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */
-#define SK_MS_STAT_MASTER 2 /* This station is master */
-#define SK_MS_STAT_SLAVE 3 /* This station is slave */
-#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */
-#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */
-
-/* parameter 'Mode' when calling SkXmSetRxCmd() */
-#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */
-#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */
-#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */
-#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */
-#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */
-#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */
-#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */
-#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
-#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */
-#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */
-
-/* parameter 'Para' when calling SkMacSetRxTxEn() */
-#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */
-#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */
-#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */
-#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */
-#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */
-#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */
-
-/* States of PState */
-#define SK_PRT_RESET 0 /* the port is reset */
-#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */
-#define SK_PRT_INIT 2 /* the port is initialized */
-#define SK_PRT_RUN 3 /* the port has an active link */
-
-/* PHY power down modes */
-#define PHY_PM_OPERATIONAL_MODE 0 /* PHY operational mode */
-#define PHY_PM_DEEP_SLEEP 1 /* coma mode --> minimal power */
-#define PHY_PM_IEEE_POWER_DOWN 2 /* IEEE 22.2.4.1.5 compl. power down */
-#define PHY_PM_ENERGY_DETECT 3 /* energy detect */
-#define PHY_PM_ENERGY_DETECT_PLUS 4 /* energy detect plus */
-
-/* Default receive frame limit for Workaround of XMAC Errata */
-#define SK_DEF_RX_WA_LIM SK_CONSTU64(100)
-
-/* values for GILedBlinkCtrl (LED Blink Control) */
-#define SK_ACT_LED_BLINK (1<<0) /* Active LED blinking */
-#define SK_DUP_LED_NORMAL (1<<1) /* Duplex LED normal */
-#define SK_LED_LINK100_ON (1<<2) /* Link 100M LED on */
-
-/* Link Partner Status */
-#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */
-#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */
-#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */
-
-/* Maximum Restarts before restart is ignored (3Com WA) */
-#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */
-
-/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
-#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */
-
-/* structures *****************************************************************/
-
-/*
- * MAC specific functions
- */
-typedef struct s_GeMacFunc {
- int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
- int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
- SK_U16 StatAddr, SK_U32 SK_FAR *pVal);
- int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
- int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
- SK_U16 IStatus, SK_U64 SK_FAR *pVal);
-} SK_GEMACFUNC;
-
-/*
- * Port Structure
- */
-typedef struct s_GePort {
-#ifndef SK_DIAG
- SK_TIMER PWaTimer; /* Workaround Timer */
- SK_TIMER HalfDupChkTimer;
-#endif /* SK_DIAG */
- SK_U32 PPrevShorts; /* Previous Short Counter checking */
- SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */
- SK_U64 PPrevRx; /* Previous RxOk Counter checking */
- SK_U64 PRxLim; /* Previous RxOk Counter checking */
- SK_U64 LastOctets; /* For half duplex hang check */
- int PLinkResCt; /* Link Restart Counter */
- int PAutoNegTimeOut;/* Auto-negotiation timeout current value */
- int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */
- int PRxQSize; /* Port Rx Queue Size in kB */
- int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */
- int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */
- SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */
- SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */
- SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */
- SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */
- SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */
- SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */
- SK_U32 PRxOverCnt; /* Receive Overflow Counter */
- int PRxQOff; /* Rx Queue Address Offset */
- int PXsQOff; /* Synchronous Tx Queue Address Offset */
- int PXaQOff; /* Asynchronous Tx Queue Address Offset */
- int PhyType; /* PHY used on this port */
- int PState; /* Port status (reset, stop, init, run) */
- SK_U16 PhyId1; /* PHY Id1 on this port */
- SK_U16 PhyAddr; /* MDIO/MDC PHY address */
- SK_U16 PIsave; /* Saved Interrupt status word */
- SK_U16 PSsave; /* Saved PHY status word */
- SK_U16 PGmANegAdv; /* Saved GPhy AutoNegAdvertisment register */
- SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */
- SK_BOOL PLinkBroken; /* Is Link broken ? */
- SK_BOOL PCheckPar; /* Do we check for parity errors ? */
- SK_BOOL HalfDupTimerActive;
- SK_U8 PLinkCap; /* Link Capabilities */
- SK_U8 PLinkModeConf; /* Link Mode configured */
- SK_U8 PLinkMode; /* Link Mode currently used */
- SK_U8 PLinkModeStatus;/* Link Mode Status */
- SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */
- SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */
- SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */
- SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */
- SK_U8 PFlowCtrlMode; /* Flow Control Mode */
- SK_U8 PFlowCtrlStatus;/* Flow Control Status */
- SK_U8 PMSCap; /* Master/Slave Capabilities */
- SK_U8 PMSMode; /* Master/Slave Mode */
- SK_U8 PMSStatus; /* Master/Slave Status */
- SK_BOOL PAutoNegFail; /* Auto-negotiation fail flag */
- SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */
- SK_U8 PCableLen; /* Cable Length */
- SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */
- SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */
- SK_U8 PPhyPowerState; /* PHY current power state */
- int PMacColThres; /* MAC Collision Threshold */
- int PMacJamLen; /* MAC Jam length */
- int PMacJamIpgVal; /* MAC Jam IPG */
- int PMacJamIpgData; /* MAC IPG Jam to Data */
- int PMacIpgData; /* MAC Data IPG */
- SK_BOOL PMacLimit4; /* reset collision counter and backoff algorithm */
-} SK_GEPORT;
-
-/*
- * Gigabit Ethernet Initialization Struct
- * (has to be included in the adapter context)
- */
-typedef struct s_GeInit {
- int GIChipId; /* Chip Identification Number */
- int GIChipRev; /* Chip Revision Number */
- SK_U8 GIPciHwRev; /* PCI HW Revision Number */
- SK_BOOL GIGenesis; /* Genesis adapter ? */
- SK_BOOL GIYukon; /* YUKON-A1/Bx chip */
- SK_BOOL GIYukonLite; /* YUKON-Lite chip */
- SK_BOOL GICopperType; /* Copper Type adapter ? */
- SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */
- SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */
- SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */
- SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */
- SK_U16 GILedBlinkCtrl; /* LED Blink Control */
- int GIMacsFound; /* Number of MACs found on this adapter */
- int GIMacType; /* MAC Type used on this adapter */
- int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */
- int GIPortUsage; /* Driver Port Usage */
- int GILevel; /* Initialization Level completed */
- int GIRamSize; /* The RAM size of the adapter in kB */
- int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */
- SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */
- SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */
- SK_U32 GIValIrqMask; /* Value for Interrupt Mask */
- SK_U32 GITimeStampCnt; /* Time Stamp High Counter (YUKON only) */
- SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */
- SK_GEMACFUNC GIFunc; /* MAC depedent functions */
-} SK_GEINIT;
-
-/*
- * Error numbers and messages for skxmac2.c and skgeinit.c
- */
-#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT)
-#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters"
-#define SKERR_HWI_E002 (SKERR_HWI_E001+1)
-#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing"
-#define SKERR_HWI_E003 (SKERR_HWI_E002+1)
-#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level"
-#define SKERR_HWI_E004 (SKERR_HWI_E003+1)
-#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured"
-#define SKERR_HWI_E005 (SKERR_HWI_E004+1)
-#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports"
-#define SKERR_HWI_E006 (SKERR_HWI_E005+1)
-#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state"
-#define SKERR_HWI_E007 (SKERR_HWI_E006+1)
-#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode"
-#define SKERR_HWI_E008 (SKERR_HWI_E007+1)
-#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode"
-#define SKERR_HWI_E009 (SKERR_HWI_E008+1)
-#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero"
-#define SKERR_HWI_E010 (SKERR_HWI_E009+1)
-#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters"
-#define SKERR_HWI_E011 (SKERR_HWI_E010+1)
-#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small"
-#define SKERR_HWI_E012 (SKERR_HWI_E011+1)
-#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified"
-#define SKERR_HWI_E013 (SKERR_HWI_E012+1)
-#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue"
-#define SKERR_HWI_E014 (SKERR_HWI_E013+1)
-#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified"
-#define SKERR_HWI_E015 (SKERR_HWI_E014+1)
-#define SKERR_HWI_E015MSG "Illegal Link mode parameter"
-#define SKERR_HWI_E016 (SKERR_HWI_E015+1)
-#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter"
-#define SKERR_HWI_E017 (SKERR_HWI_E016+1)
-#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal"
-#define SKERR_HWI_E018 (SKERR_HWI_E017+1)
-#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)"
-#define SKERR_HWI_E019 (SKERR_HWI_E018+1)
-#define SKERR_HWI_E019MSG "Illegal Speed parameter"
-#define SKERR_HWI_E020 (SKERR_HWI_E019+1)
-#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter"
-#define SKERR_HWI_E021 (SKERR_HWI_E020+1)
-#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter"
-#define SKERR_HWI_E022 (SKERR_HWI_E021+1)
-#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address"
-#define SKERR_HWI_E023 (SKERR_HWI_E022+1)
-#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small"
-#define SKERR_HWI_E024 (SKERR_HWI_E023+1)
-#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)"
-#define SKERR_HWI_E025 (SKERR_HWI_E024+1)
-#define SKERR_HWI_E025MSG ""
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_KR_PROTO
-
-/*
- * public functions in skgeinit.c
- */
-extern void SkGePollTxD(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL PollTxD);
-
-extern void SkGeYellowLED(
- SK_AC *pAC,
- SK_IOC IoC,
- int State);
-
-extern int SkGeCfgSync(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_U32 IntTime,
- SK_U32 LimCount,
- int SyncMode);
-
-extern void SkGeLoadLnkSyncCnt(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_U32 CntVal);
-
-extern void SkGeStopPort(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Dir,
- int RstMode);
-
-extern int SkGeInit(
- SK_AC *pAC,
- SK_IOC IoC,
- int Level);
-
-extern void SkGeDeInit(
- SK_AC *pAC,
- SK_IOC IoC);
-
-extern int SkGeInitPort(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkGeXmitLED(
- SK_AC *pAC,
- SK_IOC IoC,
- int Led,
- int Mode);
-
-extern int SkGeInitAssignRamToQueues(
- SK_AC *pAC,
- int ActivePort,
- SK_BOOL DualNet);
-
-/*
- * public functions in skxmac2.c
- */
-extern void SkMacRxTxDisable(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacSoftRst(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacHardRst(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkXmInitMac(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkGmInitMac(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacInitPhy(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL DoLoop);
-
-extern void SkMacIrqDisable(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacFlushTxFifo(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacIrq(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern int SkMacAutoNegDone(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacAutoNegLipaPhy(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_U16 IStatus);
-
-extern int SkMacRxTxEnable(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port);
-
-extern void SkMacPromiscMode(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL Enable);
-
-extern void SkMacHashing(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL Enable);
-
-extern void SkXmPhyRead(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Addr,
- SK_U16 SK_FAR *pVal);
-
-extern void SkXmPhyWrite(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Addr,
- SK_U16 Val);
-
-extern void SkGmPhyRead(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Addr,
- SK_U16 SK_FAR *pVal);
-
-extern void SkGmPhyWrite(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Addr,
- SK_U16 Val);
-
-extern void SkXmClrExactAddr(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int StartNum,
- int StopNum);
-
-extern void SkXmAutoNegLipaXmac(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_U16 IStatus);
-
-extern int SkXmUpdateStats(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port);
-
-extern int SkGmUpdateStats(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port);
-
-extern int SkXmMacStatistic(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port,
- SK_U16 StatAddr,
- SK_U32 SK_FAR *pVal);
-
-extern int SkGmMacStatistic(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port,
- SK_U16 StatAddr,
- SK_U32 SK_FAR *pVal);
-
-extern int SkXmResetCounter(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port);
-
-extern int SkGmResetCounter(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port);
-
-extern int SkXmOverflowStatus(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port,
- SK_U16 IStatus,
- SK_U64 SK_FAR *pStatus);
-
-extern int SkGmOverflowStatus(
- SK_AC *pAC,
- SK_IOC IoC,
- unsigned int Port,
- SK_U16 MacStatus,
- SK_U64 SK_FAR *pStatus);
-
-extern int SkGmCableDiagStatus(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL StartTest);
-
-#ifdef SK_DIAG
-extern void SkGePhyRead(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Addr,
- SK_U16 *pVal);
-
-extern void SkGePhyWrite(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Addr,
- SK_U16 Val);
-
-extern void SkMacSetRxCmd(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- int Mode);
-extern void SkMacCrcGener(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL Enable);
-extern void SkMacTimeStamp(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL Enable);
-extern void SkXmSendCont(
- SK_AC *pAC,
- SK_IOC IoC,
- int Port,
- SK_BOOL Enable);
-#endif /* SK_DIAG */
-
-#else /* SK_KR_PROTO */
-
-/*
- * public functions in skgeinit.c
- */
-extern void SkGePollTxD();
-extern void SkGeYellowLED();
-extern int SkGeCfgSync();
-extern void SkGeLoadLnkSyncCnt();
-extern void SkGeStopPort();
-extern int SkGeInit();
-extern void SkGeDeInit();
-extern int SkGeInitPort();
-extern void SkGeXmitLED();
-extern int SkGeInitAssignRamToQueues();
-
-/*
- * public functions in skxmac2.c
- */
-extern void SkMacRxTxDisable();
-extern void SkMacSoftRst();
-extern void SkMacHardRst();
-extern void SkMacInitPhy();
-extern int SkMacRxTxEnable();
-extern void SkMacPromiscMode();
-extern void SkMacHashing();
-extern void SkMacIrqDisable();
-extern void SkMacFlushTxFifo();
-extern void SkMacIrq();
-extern int SkMacAutoNegDone();
-extern void SkMacAutoNegLipaPhy();
-extern void SkXmInitMac();
-extern void SkXmPhyRead();
-extern void SkXmPhyWrite();
-extern void SkGmInitMac();
-extern void SkGmPhyRead();
-extern void SkGmPhyWrite();
-extern void SkXmClrExactAddr();
-extern void SkXmAutoNegLipaXmac();
-extern int SkXmUpdateStats();
-extern int SkGmUpdateStats();
-extern int SkXmMacStatistic();
-extern int SkGmMacStatistic();
-extern int SkXmResetCounter();
-extern int SkGmResetCounter();
-extern int SkXmOverflowStatus();
-extern int SkGmOverflowStatus();
-extern int SkGmCableDiagStatus();
-
-#ifdef SK_DIAG
-extern void SkGePhyRead();
-extern void SkGePhyWrite();
-extern void SkMacSetRxCmd();
-extern void SkMacCrcGener();
-extern void SkMacTimeStamp();
-extern void SkXmSendCont();
-#endif /* SK_DIAG */
-
-#endif /* SK_KR_PROTO */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __INC_SKGEINIT_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
deleted file mode 100644
index ddd304f1a48bf6a987ee75191e171542e161c2c0..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgepnm2.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*****************************************************************************
- *
- * Name: skgepnm2.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.36 $
- * Date: $Date: 2003/05/23 12:45:13 $
- * Purpose: Defines for Private Network Management Interface
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _SKGEPNM2_H_
-#define _SKGEPNM2_H_
-
-/*
- * General definitions
- */
-#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */
-#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */
-
-#define SK_PNMI_BUS_PCI 1 /* PCI bus*/
-
-/*
- * Actions
- */
-#define SK_PNMI_ACT_IDLE 1
-#define SK_PNMI_ACT_RESET 2
-#define SK_PNMI_ACT_SELFTEST 3
-#define SK_PNMI_ACT_RESETCNT 4
-
-/*
- * VPD releated defines
- */
-
-#define SK_PNMI_VPD_RW 1
-#define SK_PNMI_VPD_RO 2
-
-#define SK_PNMI_VPD_OK 0
-#define SK_PNMI_VPD_NOTFOUND 1
-#define SK_PNMI_VPD_CUT 2
-#define SK_PNMI_VPD_TIMEOUT 3
-#define SK_PNMI_VPD_FULL 4
-#define SK_PNMI_VPD_NOWRITE 5
-#define SK_PNMI_VPD_FATAL 6
-
-#define SK_PNMI_VPD_IGNORE 0
-#define SK_PNMI_VPD_CREATE 1
-#define SK_PNMI_VPD_DELETE 2
-
-
-/*
- * RLMT related defines
- */
-#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */
-
-
-/*
- * VCT internal status values
- */
-#define SK_PNMI_VCT_PENDING 32
-#define SK_PNMI_VCT_TEST_DONE 64
-#define SK_PNMI_VCT_LINK 128
-
-/*
- * Internal table definitions
- */
-#define SK_PNMI_GET 0
-#define SK_PNMI_PRESET 1
-#define SK_PNMI_SET 2
-
-#define SK_PNMI_RO 0
-#define SK_PNMI_RW 1
-#define SK_PNMI_WO 2
-
-typedef struct s_OidTabEntry {
- SK_U32 Id;
- SK_U32 InstanceNo;
- unsigned int StructSize;
- unsigned int Offset;
- int Access;
- int (* Func)(SK_AC *pAc, SK_IOC pIo, int action,
- SK_U32 Id, char* pBuf, unsigned int* pLen,
- SK_U32 Instance, unsigned int TableIndex,
- SK_U32 NetNumber);
- SK_U16 Param;
-} SK_PNMI_TAB_ENTRY;
-
-
-/*
- * Trap lengths
- */
-#define SK_PNMI_TRAP_SIMPLE_LEN 17
-#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46
-#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23
-#define SK_PNMI_TRAP_RLMT_PORT_LEN 23
-
-/*
- * Number of MAC types supported
- */
-#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1)
-
-/*
- * MAC statistic data list (overall set for MAC types used)
- */
-enum SK_MACSTATS {
- SK_PNMI_HTX = 0,
- SK_PNMI_HTX_OCTET,
- SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET,
- SK_PNMI_HTX_OCTETLOW,
- SK_PNMI_HTX_BROADCAST,
- SK_PNMI_HTX_MULTICAST,
- SK_PNMI_HTX_UNICAST,
- SK_PNMI_HTX_BURST,
- SK_PNMI_HTX_PMACC,
- SK_PNMI_HTX_MACC,
- SK_PNMI_HTX_COL,
- SK_PNMI_HTX_SINGLE_COL,
- SK_PNMI_HTX_MULTI_COL,
- SK_PNMI_HTX_EXCESS_COL,
- SK_PNMI_HTX_LATE_COL,
- SK_PNMI_HTX_DEFFERAL,
- SK_PNMI_HTX_EXCESS_DEF,
- SK_PNMI_HTX_UNDERRUN,
- SK_PNMI_HTX_CARRIER,
- SK_PNMI_HTX_UTILUNDER,
- SK_PNMI_HTX_UTILOVER,
- SK_PNMI_HTX_64,
- SK_PNMI_HTX_127,
- SK_PNMI_HTX_255,
- SK_PNMI_HTX_511,
- SK_PNMI_HTX_1023,
- SK_PNMI_HTX_MAX,
- SK_PNMI_HTX_LONGFRAMES,
- SK_PNMI_HTX_SYNC,
- SK_PNMI_HTX_SYNC_OCTET,
- SK_PNMI_HTX_RESERVED,
-
- SK_PNMI_HRX,
- SK_PNMI_HRX_OCTET,
- SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET,
- SK_PNMI_HRX_OCTETLOW,
- SK_PNMI_HRX_BADOCTET,
- SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
- SK_PNMI_HRX_BADOCTETLOW,
- SK_PNMI_HRX_BROADCAST,
- SK_PNMI_HRX_MULTICAST,
- SK_PNMI_HRX_UNICAST,
- SK_PNMI_HRX_PMACC,
- SK_PNMI_HRX_MACC,
- SK_PNMI_HRX_PMACC_ERR,
- SK_PNMI_HRX_MACC_UNKWN,
- SK_PNMI_HRX_BURST,
- SK_PNMI_HRX_MISSED,
- SK_PNMI_HRX_FRAMING,
- SK_PNMI_HRX_UNDERSIZE,
- SK_PNMI_HRX_OVERFLOW,
- SK_PNMI_HRX_JABBER,
- SK_PNMI_HRX_CARRIER,
- SK_PNMI_HRX_IRLENGTH,
- SK_PNMI_HRX_SYMBOL,
- SK_PNMI_HRX_SHORTS,
- SK_PNMI_HRX_RUNT,
- SK_PNMI_HRX_TOO_LONG,
- SK_PNMI_HRX_FCS,
- SK_PNMI_HRX_CEXT,
- SK_PNMI_HRX_UTILUNDER,
- SK_PNMI_HRX_UTILOVER,
- SK_PNMI_HRX_64,
- SK_PNMI_HRX_127,
- SK_PNMI_HRX_255,
- SK_PNMI_HRX_511,
- SK_PNMI_HRX_1023,
- SK_PNMI_HRX_MAX,
- SK_PNMI_HRX_LONGFRAMES,
-
- SK_PNMI_HRX_RESERVED,
-
- SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
-};
-
-/*
- * MAC specific data
- */
-typedef struct s_PnmiStatAddr {
- SK_U16 Reg; /* MAC register containing the value */
- SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/
-} SK_PNMI_STATADDR;
-
-
-/*
- * SK_PNMI_STRUCT_DATA copy offset evaluation macros
- */
-#define SK_PNMI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
-#define SK_PNMI_MAI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
-#define SK_PNMI_VPD_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e))
-#define SK_PNMI_SEN_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e))
-#define SK_PNMI_CHK_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e))
-#define SK_PNMI_STA_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e))
-#define SK_PNMI_CNF_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e))
-#define SK_PNMI_RLM_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e))
-#define SK_PNMI_MON_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e))
-#define SK_PNMI_TRP_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e))
-
-#define SK_PNMI_SET_STAT(b,s,o) {SK_U32 Val32; char *pVal; \
- Val32 = (s); \
- pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
- &(((SK_PNMI_STRUCT_DATA *)0)-> \
- ReturnStatus.ErrorStatus)); \
- SK_PNMI_STORE_U32(pVal, Val32); \
- Val32 = (o); \
- pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
- &(((SK_PNMI_STRUCT_DATA *)0)-> \
- ReturnStatus.ErrorOffset)); \
- SK_PNMI_STORE_U32(pVal, Val32);}
-
-/*
- * Time macros
- */
-#ifndef SK_PNMI_HUNDREDS_SEC
-#if SK_TICKS_PER_SEC == 100
-#define SK_PNMI_HUNDREDS_SEC(t) (t)
-#else
-#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC))
-#endif /* !SK_TICKS_PER_SEC */
-#endif /* !SK_PNMI_HUNDREDS_SEC */
-
-/*
- * Macros to work around alignment problems
- */
-#ifndef SK_PNMI_STORE_U16
-#define SK_PNMI_STORE_U16(p,v) {*(char *)(p) = *((char *)&(v)); \
- *((char *)(p) + 1) = \
- *(((char *)&(v)) + 1);}
-#endif
-
-#ifndef SK_PNMI_STORE_U32
-#define SK_PNMI_STORE_U32(p,v) {*(char *)(p) = *((char *)&(v)); \
- *((char *)(p) + 1) = \
- *(((char *)&(v)) + 1); \
- *((char *)(p) + 2) = \
- *(((char *)&(v)) + 2); \
- *((char *)(p) + 3) = \
- *(((char *)&(v)) + 3);}
-#endif
-
-#ifndef SK_PNMI_STORE_U64
-#define SK_PNMI_STORE_U64(p,v) {*(char *)(p) = *((char *)&(v)); \
- *((char *)(p) + 1) = \
- *(((char *)&(v)) + 1); \
- *((char *)(p) + 2) = \
- *(((char *)&(v)) + 2); \
- *((char *)(p) + 3) = \
- *(((char *)&(v)) + 3); \
- *((char *)(p) + 4) = \
- *(((char *)&(v)) + 4); \
- *((char *)(p) + 5) = \
- *(((char *)&(v)) + 5); \
- *((char *)(p) + 6) = \
- *(((char *)&(v)) + 6); \
- *((char *)(p) + 7) = \
- *(((char *)&(v)) + 7);}
-#endif
-
-#ifndef SK_PNMI_READ_U16
-#define SK_PNMI_READ_U16(p,v) {*((char *)&(v)) = *(char *)(p); \
- *(((char *)&(v)) + 1) = \
- *((char *)(p) + 1);}
-#endif
-
-#ifndef SK_PNMI_READ_U32
-#define SK_PNMI_READ_U32(p,v) {*((char *)&(v)) = *(char *)(p); \
- *(((char *)&(v)) + 1) = \
- *((char *)(p) + 1); \
- *(((char *)&(v)) + 2) = \
- *((char *)(p) + 2); \
- *(((char *)&(v)) + 3) = \
- *((char *)(p) + 3);}
-#endif
-
-#ifndef SK_PNMI_READ_U64
-#define SK_PNMI_READ_U64(p,v) {*((char *)&(v)) = *(char *)(p); \
- *(((char *)&(v)) + 1) = \
- *((char *)(p) + 1); \
- *(((char *)&(v)) + 2) = \
- *((char *)(p) + 2); \
- *(((char *)&(v)) + 3) = \
- *((char *)(p) + 3); \
- *(((char *)&(v)) + 4) = \
- *((char *)(p) + 4); \
- *(((char *)&(v)) + 5) = \
- *((char *)(p) + 5); \
- *(((char *)&(v)) + 6) = \
- *((char *)(p) + 6); \
- *(((char *)&(v)) + 7) = \
- *((char *)(p) + 7);}
-#endif
-
-/*
- * Macros for Debug
- */
-#ifdef DEBUG
-
-#define SK_PNMI_CHECKFLAGS(vSt) {if (pAC->Pnmi.MacUpdatedFlag > 0 || \
- pAC->Pnmi.RlmtUpdatedFlag > 0 || \
- pAC->Pnmi.SirqUpdatedFlag > 0) { \
- SK_DBG_MSG(pAC, \
- SK_DBGMOD_PNMI, \
- SK_DBGCAT_CTRL, \
- ("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \
- vSt, \
- pAC->Pnmi.MacUpdatedFlag, \
- pAC->Pnmi.RlmtUpdatedFlag, \
- pAC->Pnmi.SirqUpdatedFlag))}}
-
-#else /* !DEBUG */
-
-#define SK_PNMI_CHECKFLAGS(vSt) /* Nothing */
-
-#endif /* !DEBUG */
-
-#endif /* _SKGEPNM2_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
deleted file mode 100644
index 1ed214ccb2532272ad3d63cf6c4548ee23ec112f..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgepnmi.h
+++ /dev/null
@@ -1,962 +0,0 @@
-/*****************************************************************************
- *
- * Name: skgepnmi.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.62 $
- * Date: $Date: 2003/08/15 12:31:52 $
- * Purpose: Defines for Private Network Management Interface
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _SKGEPNMI_H_
-#define _SKGEPNMI_H_
-
-/*
- * Include dependencies
- */
-#include "h/sktypes.h"
-#include "h/skerror.h"
-#include "h/sktimer.h"
-#include "h/ski2c.h"
-#include "h/skaddr.h"
-#include "h/skrlmt.h"
-#include "h/skvpd.h"
-
-/*
- * Management Database Version
- */
-#define SK_PNMI_MDB_VERSION 0x00030001 /* 3.1 */
-
-
-/*
- * Event definitions
- */
-#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */
-#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */
-#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */
-#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */
-#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */
-#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */
-#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */
-#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */
-#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */
-
-#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */
-#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */
-#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */
-#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */
-#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */
-#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets
- 1 = single net; 2 = dual net */
-#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */
-
-
-/*
- * Return values
- */
-#define SK_PNMI_ERR_OK 0
-#define SK_PNMI_ERR_GENERAL 1
-#define SK_PNMI_ERR_TOO_SHORT 2
-#define SK_PNMI_ERR_BAD_VALUE 3
-#define SK_PNMI_ERR_READ_ONLY 4
-#define SK_PNMI_ERR_UNKNOWN_OID 5
-#define SK_PNMI_ERR_UNKNOWN_INST 6
-#define SK_PNMI_ERR_UNKNOWN_NET 7
-#define SK_PNMI_ERR_NOT_SUPPORTED 10
-
-
-/*
- * Return values of driver reset function SK_DRIVER_RESET() and
- * driver event function SK_DRIVER_EVENT()
- */
-#define SK_PNMI_ERR_OK 0
-#define SK_PNMI_ERR_FAIL 1
-
-
-/*
- * Return values of driver test function SK_DRIVER_SELFTEST()
- */
-#define SK_PNMI_TST_UNKNOWN (1 << 0)
-#define SK_PNMI_TST_TRANCEIVER (1 << 1)
-#define SK_PNMI_TST_ASIC (1 << 2)
-#define SK_PNMI_TST_SENSOR (1 << 3)
-#define SK_PNMI_TST_POWERMGMT (1 << 4)
-#define SK_PNMI_TST_PCI (1 << 5)
-#define SK_PNMI_TST_MAC (1 << 6)
-
-
-/*
- * RLMT specific definitions
- */
-#define SK_PNMI_RLMT_STATUS_STANDBY 1
-#define SK_PNMI_RLMT_STATUS_ACTIVE 2
-#define SK_PNMI_RLMT_STATUS_ERROR 3
-
-#define SK_PNMI_RLMT_LSTAT_PHY_DOWN 1
-#define SK_PNMI_RLMT_LSTAT_AUTONEG 2
-#define SK_PNMI_RLMT_LSTAT_LOG_DOWN 3
-#define SK_PNMI_RLMT_LSTAT_LOG_UP 4
-#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5
-
-#define SK_PNMI_RLMT_MODE_CHK_LINK (SK_RLMT_CHECK_LINK)
-#define SK_PNMI_RLMT_MODE_CHK_RX (SK_RLMT_CHECK_LOC_LINK)
-#define SK_PNMI_RLMT_MODE_CHK_SPT (SK_RLMT_CHECK_SEG)
-/* #define SK_PNMI_RLMT_MODE_CHK_EX */
-
-/*
- * OID definition
- */
-#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */
-
-#define OID_GEN_XMIT_OK 0x00020101
-#define OID_GEN_RCV_OK 0x00020102
-#define OID_GEN_XMIT_ERROR 0x00020103
-#define OID_GEN_RCV_ERROR 0x00020104
-#define OID_GEN_RCV_NO_BUFFER 0x00020105
-
-/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */
-#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202
-/* #define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 */
-#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204
-/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */
-#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206
-/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */
-#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208
-/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */
-#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A
-/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */
-#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C
-#define OID_GEN_RCV_CRC_ERROR 0x0002020D
-#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E
-
-#define OID_802_3_PERMANENT_ADDRESS 0x01010101
-#define OID_802_3_CURRENT_ADDRESS 0x01010102
-/* #define OID_802_3_MULTICAST_LIST 0x01010103 */
-/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */
-/* #define OID_802_3_MAC_OPTIONS 0x01010105 */
-
-#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101
-#define OID_802_3_XMIT_ONE_COLLISION 0x01020102
-#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103
-#define OID_802_3_XMIT_DEFERRED 0x01020201
-#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202
-#define OID_802_3_RCV_OVERRUN 0x01020203
-#define OID_802_3_XMIT_UNDERRUN 0x01020204
-#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206
-#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207
-
-/*
- * PnP and PM OIDs
- */
-#ifdef SK_POWER_MGMT
-#define OID_PNP_CAPABILITIES 0xFD010100
-#define OID_PNP_SET_POWER 0xFD010101
-#define OID_PNP_QUERY_POWER 0xFD010102
-#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103
-#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104
-#define OID_PNP_ENABLE_WAKE_UP 0xFD010106
-#endif /* SK_POWER_MGMT */
-
-#endif /* _NDIS_ */
-
-#define OID_SKGE_MDB_VERSION 0xFF010100
-#define OID_SKGE_SUPPORTED_LIST 0xFF010101
-#define OID_SKGE_VPD_FREE_BYTES 0xFF010102
-#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103
-#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104
-#define OID_SKGE_VPD_KEY 0xFF010105
-#define OID_SKGE_VPD_VALUE 0xFF010106
-#define OID_SKGE_VPD_ACCESS 0xFF010107
-#define OID_SKGE_VPD_ACTION 0xFF010108
-
-#define OID_SKGE_PORT_NUMBER 0xFF010110
-#define OID_SKGE_DEVICE_TYPE 0xFF010111
-#define OID_SKGE_DRIVER_DESCR 0xFF010112
-#define OID_SKGE_DRIVER_VERSION 0xFF010113
-#define OID_SKGE_HW_DESCR 0xFF010114
-#define OID_SKGE_HW_VERSION 0xFF010115
-#define OID_SKGE_CHIPSET 0xFF010116
-#define OID_SKGE_ACTION 0xFF010117
-#define OID_SKGE_RESULT 0xFF010118
-#define OID_SKGE_BUS_TYPE 0xFF010119
-#define OID_SKGE_BUS_SPEED 0xFF01011A
-#define OID_SKGE_BUS_WIDTH 0xFF01011B
-/* 0xFF01011C unused */
-#define OID_SKGE_DIAG_ACTION 0xFF01011D
-#define OID_SKGE_DIAG_RESULT 0xFF01011E
-#define OID_SKGE_MTU 0xFF01011F
-#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120
-#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121
-#define OID_SKGE_PMD 0xFF010122
-#define OID_SKGE_CONNECTOR 0xFF010123
-#define OID_SKGE_LINK_CAP 0xFF010124
-#define OID_SKGE_LINK_MODE 0xFF010125
-#define OID_SKGE_LINK_MODE_STATUS 0xFF010126
-#define OID_SKGE_LINK_STATUS 0xFF010127
-#define OID_SKGE_FLOWCTRL_CAP 0xFF010128
-#define OID_SKGE_FLOWCTRL_MODE 0xFF010129
-#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A
-#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B
-#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C
-#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D
-#define OID_SKGE_MULTICAST_LIST 0xFF01012E
-#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F
-
-#define OID_SKGE_TRAP 0xFF010130
-#define OID_SKGE_TRAP_NUMBER 0xFF010131
-
-#define OID_SKGE_RLMT_MODE 0xFF010140
-#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141
-#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142
-#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143
-#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160
-
-#define OID_SKGE_SPEED_CAP 0xFF010170
-#define OID_SKGE_SPEED_MODE 0xFF010171
-#define OID_SKGE_SPEED_STATUS 0xFF010172
-
-#define OID_SKGE_BOARDLEVEL 0xFF010180
-
-#define OID_SKGE_SENSOR_NUMBER 0xFF020100
-#define OID_SKGE_SENSOR_INDEX 0xFF020101
-#define OID_SKGE_SENSOR_DESCR 0xFF020102
-#define OID_SKGE_SENSOR_TYPE 0xFF020103
-#define OID_SKGE_SENSOR_VALUE 0xFF020104
-#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105
-#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106
-#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107
-#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108
-#define OID_SKGE_SENSOR_STATUS 0xFF020109
-#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A
-#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B
-#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C
-#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D
-
-#define OID_SKGE_CHKSM_NUMBER 0xFF020110
-#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111
-#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112
-#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113
-#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114
-#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115
-
-#define OID_SKGE_STAT_TX 0xFF020120
-#define OID_SKGE_STAT_TX_OCTETS 0xFF020121
-#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122
-#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123
-#define OID_SKGE_STAT_TX_UNICAST 0xFF020124
-#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125
-#define OID_SKGE_STAT_TX_BURST 0xFF020126
-#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127
-#define OID_SKGE_STAT_TX_FLOWC 0xFF020128
-#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129
-#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A
-#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B
-#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C
-#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D
-#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E
-#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F
-#define OID_SKGE_STAT_TX_CARRIER 0xFF020130
-/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */
-#define OID_SKGE_STAT_TX_64 0xFF020132
-#define OID_SKGE_STAT_TX_127 0xFF020133
-#define OID_SKGE_STAT_TX_255 0xFF020134
-#define OID_SKGE_STAT_TX_511 0xFF020135
-#define OID_SKGE_STAT_TX_1023 0xFF020136
-#define OID_SKGE_STAT_TX_MAX 0xFF020137
-#define OID_SKGE_STAT_TX_SYNC 0xFF020138
-#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139
-#define OID_SKGE_STAT_RX 0xFF02013A
-#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B
-#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C
-#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D
-#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E
-#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F
-#define OID_SKGE_STAT_RX_FLOWC 0xFF020140
-#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141
-#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142
-#define OID_SKGE_STAT_RX_BURST 0xFF020143
-#define OID_SKGE_STAT_RX_MISSED 0xFF020144
-#define OID_SKGE_STAT_RX_FRAMING 0xFF020145
-#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146
-#define OID_SKGE_STAT_RX_JABBER 0xFF020147
-#define OID_SKGE_STAT_RX_CARRIER 0xFF020148
-#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149
-#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A
-#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B
-#define OID_SKGE_STAT_RX_RUNT 0xFF02014C
-#define OID_SKGE_STAT_RX_CEXT 0xFF02014D
-#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E
-#define OID_SKGE_STAT_RX_FCS 0xFF02014F
-/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */
-#define OID_SKGE_STAT_RX_64 0xFF020151
-#define OID_SKGE_STAT_RX_127 0xFF020152
-#define OID_SKGE_STAT_RX_255 0xFF020153
-#define OID_SKGE_STAT_RX_511 0xFF020154
-#define OID_SKGE_STAT_RX_1023 0xFF020155
-#define OID_SKGE_STAT_RX_MAX 0xFF020156
-#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157
-
-#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160
-#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161
-#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162
-#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163
-
-#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164
-#define OID_SKGE_RLMT_STATUS 0xFF020165
-#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166
-#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167
-#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168
-#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169
-
-#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150
-#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151
-#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152
-#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153
-#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154
-#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155
-
-#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170
-#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171
-#define OID_SKGE_TX_RETRY 0xFF020172
-#define OID_SKGE_RX_INTR_CTS 0xFF020173
-#define OID_SKGE_TX_INTR_CTS 0xFF020174
-#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175
-#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176
-#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177
-#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178
-#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179
-#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A
-#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B
-#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C
-#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D
-#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E
-#define OID_SKGE_SYSUPTIME 0xFF02017F
-
-#define OID_SKGE_ALL_DATA 0xFF020190
-
-/* Defines for VCT. */
-#define OID_SKGE_VCT_GET 0xFF020200
-#define OID_SKGE_VCT_SET 0xFF020201
-#define OID_SKGE_VCT_STATUS 0xFF020202
-
-#ifdef SK_DIAG_SUPPORT
-/* Defines for driver DIAG mode. */
-#define OID_SKGE_DIAG_MODE 0xFF020204
-#endif /* SK_DIAG_SUPPORT */
-
-/* New OIDs */
-#define OID_SKGE_DRIVER_RELDATE 0xFF020210
-#define OID_SKGE_DRIVER_FILENAME 0xFF020211
-#define OID_SKGE_CHIPID 0xFF020212
-#define OID_SKGE_RAMSIZE 0xFF020213
-#define OID_SKGE_VAUXAVAIL 0xFF020214
-#define OID_SKGE_PHY_TYPE 0xFF020215
-#define OID_SKGE_PHY_LP_MODE 0xFF020216
-
-/* VCT struct to store a backup copy of VCT data after a port reset. */
-typedef struct s_PnmiVct {
- SK_U8 VctStatus;
- SK_U8 PCableLen;
- SK_U32 PMdiPairLen[4];
- SK_U8 PMdiPairSts[4];
-} SK_PNMI_VCT;
-
-
-/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */
-#define SK_PNMI_VCT_NONE 0
-#define SK_PNMI_VCT_OLD_VCT_DATA 1
-#define SK_PNMI_VCT_NEW_VCT_DATA 2
-#define SK_PNMI_VCT_OLD_DSP_DATA 4
-#define SK_PNMI_VCT_NEW_DSP_DATA 8
-#define SK_PNMI_VCT_RUNNING 16
-
-
-/* VCT cable test status. */
-#define SK_PNMI_VCT_NORMAL_CABLE 0
-#define SK_PNMI_VCT_SHORT_CABLE 1
-#define SK_PNMI_VCT_OPEN_CABLE 2
-#define SK_PNMI_VCT_TEST_FAIL 3
-#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4
-
-#define OID_SKGE_TRAP_SEN_WAR_LOW 500
-#define OID_SKGE_TRAP_SEN_WAR_UPP 501
-#define OID_SKGE_TRAP_SEN_ERR_LOW 502
-#define OID_SKGE_TRAP_SEN_ERR_UPP 503
-#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520
-#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521
-#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522
-#define OID_SKGE_TRAP_RLMT_PORT_UP 523
-#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524
-
-#ifdef SK_DIAG_SUPPORT
-/* Defines for driver DIAG mode. */
-#define SK_DIAG_ATTACHED 2
-#define SK_DIAG_RUNNING 1
-#define SK_DIAG_IDLE 0
-#endif /* SK_DIAG_SUPPORT */
-
-/*
- * Generic PNMI IOCTL subcommand definitions.
- */
-#define SK_GET_SINGLE_VAR 1
-#define SK_SET_SINGLE_VAR 2
-#define SK_PRESET_SINGLE_VAR 3
-#define SK_GET_FULL_MIB 4
-#define SK_SET_FULL_MIB 5
-#define SK_PRESET_FULL_MIB 6
-
-
-/*
- * Define error numbers and messages for syslog
- */
-#define SK_PNMI_ERR001 (SK_ERRBASE_PNMI + 1)
-#define SK_PNMI_ERR001MSG "SkPnmiGetStruct: Unknown OID"
-#define SK_PNMI_ERR002 (SK_ERRBASE_PNMI + 2)
-#define SK_PNMI_ERR002MSG "SkPnmiGetStruct: Cannot read VPD keys"
-#define SK_PNMI_ERR003 (SK_ERRBASE_PNMI + 3)
-#define SK_PNMI_ERR003MSG "OidStruct: Called with wrong OID"
-#define SK_PNMI_ERR004 (SK_ERRBASE_PNMI + 4)
-#define SK_PNMI_ERR004MSG "OidStruct: Called with wrong action"
-#define SK_PNMI_ERR005 (SK_ERRBASE_PNMI + 5)
-#define SK_PNMI_ERR005MSG "Perform: Cannot reset driver"
-#define SK_PNMI_ERR006 (SK_ERRBASE_PNMI + 6)
-#define SK_PNMI_ERR006MSG "Perform: Unknown OID action command"
-#define SK_PNMI_ERR007 (SK_ERRBASE_PNMI + 7)
-#define SK_PNMI_ERR007MSG "General: Driver description not initialized"
-#define SK_PNMI_ERR008 (SK_ERRBASE_PNMI + 8)
-#define SK_PNMI_ERR008MSG "Addr: Tried to get unknown OID"
-#define SK_PNMI_ERR009 (SK_ERRBASE_PNMI + 9)
-#define SK_PNMI_ERR009MSG "Addr: Unknown OID"
-#define SK_PNMI_ERR010 (SK_ERRBASE_PNMI + 10)
-#define SK_PNMI_ERR010MSG "CsumStat: Unknown OID"
-#define SK_PNMI_ERR011 (SK_ERRBASE_PNMI + 11)
-#define SK_PNMI_ERR011MSG "SensorStat: Sensor descr string too long"
-#define SK_PNMI_ERR012 (SK_ERRBASE_PNMI + 12)
-#define SK_PNMI_ERR012MSG "SensorStat: Unknown OID"
-#define SK_PNMI_ERR013 (SK_ERRBASE_PNMI + 13)
-#define SK_PNMI_ERR013MSG ""
-#define SK_PNMI_ERR014 (SK_ERRBASE_PNMI + 14)
-#define SK_PNMI_ERR014MSG "Vpd: Cannot read VPD keys"
-#define SK_PNMI_ERR015 (SK_ERRBASE_PNMI + 15)
-#define SK_PNMI_ERR015MSG "Vpd: Internal array for VPD keys to small"
-#define SK_PNMI_ERR016 (SK_ERRBASE_PNMI + 16)
-#define SK_PNMI_ERR016MSG "Vpd: Key string too long"
-#define SK_PNMI_ERR017 (SK_ERRBASE_PNMI + 17)
-#define SK_PNMI_ERR017MSG "Vpd: Invalid VPD status pointer"
-#define SK_PNMI_ERR018 (SK_ERRBASE_PNMI + 18)
-#define SK_PNMI_ERR018MSG "Vpd: VPD data not valid"
-#define SK_PNMI_ERR019 (SK_ERRBASE_PNMI + 19)
-#define SK_PNMI_ERR019MSG "Vpd: VPD entries list string too long"
-#define SK_PNMI_ERR021 (SK_ERRBASE_PNMI + 21)
-#define SK_PNMI_ERR021MSG "Vpd: VPD data string too long"
-#define SK_PNMI_ERR022 (SK_ERRBASE_PNMI + 22)
-#define SK_PNMI_ERR022MSG "Vpd: VPD data string too long should be errored before"
-#define SK_PNMI_ERR023 (SK_ERRBASE_PNMI + 23)
-#define SK_PNMI_ERR023MSG "Vpd: Unknown OID in get action"
-#define SK_PNMI_ERR024 (SK_ERRBASE_PNMI + 24)
-#define SK_PNMI_ERR024MSG "Vpd: Unknown OID in preset/set action"
-#define SK_PNMI_ERR025 (SK_ERRBASE_PNMI + 25)
-#define SK_PNMI_ERR025MSG "Vpd: Cannot write VPD after modify entry"
-#define SK_PNMI_ERR026 (SK_ERRBASE_PNMI + 26)
-#define SK_PNMI_ERR026MSG "Vpd: Cannot update VPD"
-#define SK_PNMI_ERR027 (SK_ERRBASE_PNMI + 27)
-#define SK_PNMI_ERR027MSG "Vpd: Cannot delete VPD entry"
-#define SK_PNMI_ERR028 (SK_ERRBASE_PNMI + 28)
-#define SK_PNMI_ERR028MSG "Vpd: Cannot update VPD after delete entry"
-#define SK_PNMI_ERR029 (SK_ERRBASE_PNMI + 29)
-#define SK_PNMI_ERR029MSG "General: Driver description string too long"
-#define SK_PNMI_ERR030 (SK_ERRBASE_PNMI + 30)
-#define SK_PNMI_ERR030MSG "General: Driver version not initialized"
-#define SK_PNMI_ERR031 (SK_ERRBASE_PNMI + 31)
-#define SK_PNMI_ERR031MSG "General: Driver version string too long"
-#define SK_PNMI_ERR032 (SK_ERRBASE_PNMI + 32)
-#define SK_PNMI_ERR032MSG "General: Cannot read VPD Name for HW descr"
-#define SK_PNMI_ERR033 (SK_ERRBASE_PNMI + 33)
-#define SK_PNMI_ERR033MSG "General: HW description string too long"
-#define SK_PNMI_ERR034 (SK_ERRBASE_PNMI + 34)
-#define SK_PNMI_ERR034MSG "General: Unknown OID"
-#define SK_PNMI_ERR035 (SK_ERRBASE_PNMI + 35)
-#define SK_PNMI_ERR035MSG "Rlmt: Unknown OID"
-#define SK_PNMI_ERR036 (SK_ERRBASE_PNMI + 36)
-#define SK_PNMI_ERR036MSG ""
-#define SK_PNMI_ERR037 (SK_ERRBASE_PNMI + 37)
-#define SK_PNMI_ERR037MSG "Rlmt: SK_RLMT_MODE_CHANGE event return not 0"
-#define SK_PNMI_ERR038 (SK_ERRBASE_PNMI + 38)
-#define SK_PNMI_ERR038MSG "Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0"
-#define SK_PNMI_ERR039 (SK_ERRBASE_PNMI + 39)
-#define SK_PNMI_ERR039MSG "RlmtStat: Unknown OID"
-#define SK_PNMI_ERR040 (SK_ERRBASE_PNMI + 40)
-#define SK_PNMI_ERR040MSG "PowerManagement: Unknown OID"
-#define SK_PNMI_ERR041 (SK_ERRBASE_PNMI + 41)
-#define SK_PNMI_ERR041MSG "MacPrivateConf: Unknown OID"
-#define SK_PNMI_ERR042 (SK_ERRBASE_PNMI + 42)
-#define SK_PNMI_ERR042MSG "MacPrivateConf: SK_HWEV_SET_ROLE returned not 0"
-#define SK_PNMI_ERR043 (SK_ERRBASE_PNMI + 43)
-#define SK_PNMI_ERR043MSG "MacPrivateConf: SK_HWEV_SET_LMODE returned not 0"
-#define SK_PNMI_ERR044 (SK_ERRBASE_PNMI + 44)
-#define SK_PNMI_ERR044MSG "MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0"
-#define SK_PNMI_ERR045 (SK_ERRBASE_PNMI + 45)
-#define SK_PNMI_ERR045MSG "MacPrivateConf: SK_HWEV_SET_SPEED returned not 0"
-#define SK_PNMI_ERR046 (SK_ERRBASE_PNMI + 46)
-#define SK_PNMI_ERR046MSG "Monitor: Unknown OID"
-#define SK_PNMI_ERR047 (SK_ERRBASE_PNMI + 47)
-#define SK_PNMI_ERR047MSG "SirqUpdate: Event function returns not 0"
-#define SK_PNMI_ERR048 (SK_ERRBASE_PNMI + 48)
-#define SK_PNMI_ERR048MSG "RlmtUpdate: Event function returns not 0"
-#define SK_PNMI_ERR049 (SK_ERRBASE_PNMI + 49)
-#define SK_PNMI_ERR049MSG "SkPnmiInit: Invalid size of 'CounterOffset' struct!!"
-#define SK_PNMI_ERR050 (SK_ERRBASE_PNMI + 50)
-#define SK_PNMI_ERR050MSG "SkPnmiInit: Invalid size of 'StatAddr' table!!"
-#define SK_PNMI_ERR051 (SK_ERRBASE_PNMI + 51)
-#define SK_PNMI_ERR051MSG "SkPnmiEvent: Port switch suspicious"
-#define SK_PNMI_ERR052 (SK_ERRBASE_PNMI + 52)
-#define SK_PNMI_ERR052MSG ""
-#define SK_PNMI_ERR053 (SK_ERRBASE_PNMI + 53)
-#define SK_PNMI_ERR053MSG "General: Driver release date not initialized"
-#define SK_PNMI_ERR054 (SK_ERRBASE_PNMI + 54)
-#define SK_PNMI_ERR054MSG "General: Driver release date string too long"
-#define SK_PNMI_ERR055 (SK_ERRBASE_PNMI + 55)
-#define SK_PNMI_ERR055MSG "General: Driver file name not initialized"
-#define SK_PNMI_ERR056 (SK_ERRBASE_PNMI + 56)
-#define SK_PNMI_ERR056MSG "General: Driver file name string too long"
-
-/*
- * Management counter macros called by the driver
- */
-#define SK_PNMI_SET_DRIVER_DESCR(pAC,v) ((pAC)->Pnmi.pDriverDescription = \
- (char *)(v))
-
-#define SK_PNMI_SET_DRIVER_VER(pAC,v) ((pAC)->Pnmi.pDriverVersion = \
- (char *)(v))
-
-#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v) ((pAC)->Pnmi.pDriverReleaseDate = \
- (char *)(v))
-
-#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v) ((pAC)->Pnmi.pDriverFileName = \
- (char *)(v))
-
-#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \
- { \
- (pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \
- if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \
- (pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \
- } \
- }
-#define SK_PNMI_CNT_TX_RETRY(pAC,p) (((pAC)->Pnmi.Port[p].TxRetryCts)++)
-#define SK_PNMI_CNT_RX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].RxIntrCts)++)
-#define SK_PNMI_CNT_TX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].TxIntrCts)++)
-#define SK_PNMI_CNT_NO_RX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].RxNoBufCts)++)
-#define SK_PNMI_CNT_NO_TX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].TxNoBufCts)++)
-#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \
- ((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v));
-#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \
- { \
- ((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \
- (pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \
- }
-#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p) (((pAC)->Pnmi.Port[p].ErrRecoveryCts)++);
-
-#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \
- { \
- if ((p) < SK_MAX_MACS) { \
- ((pAC)->Pnmi.Port[p].StatSyncCts)++; \
- (pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \
- } \
- }
-
-#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \
- { \
- if ((p) < SK_MAX_MACS) { \
- ((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \
- } \
- }
-
-#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \
- { \
- if ((p) < SK_MAX_MACS) { \
- ((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \
- } \
- }
-
-#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \
- { \
- if ((p) < SK_MAX_MACS) { \
- ((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \
- } \
- }
-
-/*
- * Conversion Macros
- */
-#define SK_PNMI_PORT_INST2LOG(i) ((unsigned int)(i) - 1)
-#define SK_PNMI_PORT_LOG2INST(l) ((unsigned int)(l) + 1)
-#define SK_PNMI_PORT_PHYS2LOG(p) ((unsigned int)(p) + 1)
-#define SK_PNMI_PORT_LOG2PHYS(pAC,l) ((unsigned int)(l) - 1)
-#define SK_PNMI_PORT_PHYS2INST(pAC,p) \
- (pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2))
-#define SK_PNMI_PORT_INST2PHYS(pAC,i) ((unsigned int)(i) - 2)
-
-/*
- * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct
- */
-#define SK_PNMI_VPD_KEY_SIZE 5
-#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE)
-#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4)
-#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */
-
-#define SK_PNMI_MULTICAST_LISTLEN 64
-#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS)
-#define SK_PNMI_CHECKSUM_ENTRIES 3
-#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1)
-#define SK_PNMI_MONITOR_ENTRIES 20
-#define SK_PNMI_TRAP_ENTRIES 10
-#define SK_PNMI_TRAPLEN 128
-#define SK_PNMI_STRINGLEN1 80
-#define SK_PNMI_STRINGLEN2 25
-#define SK_PNMI_TRAP_QUEUE_LEN 512
-
-typedef struct s_PnmiVpd {
- char VpdKey[SK_PNMI_VPD_KEY_SIZE];
- char VpdValue[SK_PNMI_VPD_DATALEN];
- SK_U8 VpdAccess;
- SK_U8 VpdAction;
-} SK_PNMI_VPD;
-
-typedef struct s_PnmiSensor {
- SK_U8 SensorIndex;
- char SensorDescr[SK_PNMI_STRINGLEN2];
- SK_U8 SensorType;
- SK_U32 SensorValue;
- SK_U32 SensorWarningThresholdLow;
- SK_U32 SensorWarningThresholdHigh;
- SK_U32 SensorErrorThresholdLow;
- SK_U32 SensorErrorThresholdHigh;
- SK_U8 SensorStatus;
- SK_U64 SensorWarningCts;
- SK_U64 SensorErrorCts;
- SK_U64 SensorWarningTimestamp;
- SK_U64 SensorErrorTimestamp;
-} SK_PNMI_SENSOR;
-
-typedef struct s_PnmiChecksum {
- SK_U64 ChecksumRxOkCts;
- SK_U64 ChecksumRxUnableCts;
- SK_U64 ChecksumRxErrCts;
- SK_U64 ChecksumTxOkCts;
- SK_U64 ChecksumTxUnableCts;
-} SK_PNMI_CHECKSUM;
-
-typedef struct s_PnmiStat {
- SK_U64 StatTxOkCts;
- SK_U64 StatTxOctetsOkCts;
- SK_U64 StatTxBroadcastOkCts;
- SK_U64 StatTxMulticastOkCts;
- SK_U64 StatTxUnicastOkCts;
- SK_U64 StatTxLongFramesCts;
- SK_U64 StatTxBurstCts;
- SK_U64 StatTxPauseMacCtrlCts;
- SK_U64 StatTxMacCtrlCts;
- SK_U64 StatTxSingleCollisionCts;
- SK_U64 StatTxMultipleCollisionCts;
- SK_U64 StatTxExcessiveCollisionCts;
- SK_U64 StatTxLateCollisionCts;
- SK_U64 StatTxDeferralCts;
- SK_U64 StatTxExcessiveDeferralCts;
- SK_U64 StatTxFifoUnderrunCts;
- SK_U64 StatTxCarrierCts;
- SK_U64 Dummy1; /* StatTxUtilization */
- SK_U64 StatTx64Cts;
- SK_U64 StatTx127Cts;
- SK_U64 StatTx255Cts;
- SK_U64 StatTx511Cts;
- SK_U64 StatTx1023Cts;
- SK_U64 StatTxMaxCts;
- SK_U64 StatTxSyncCts;
- SK_U64 StatTxSyncOctetsCts;
- SK_U64 StatRxOkCts;
- SK_U64 StatRxOctetsOkCts;
- SK_U64 StatRxBroadcastOkCts;
- SK_U64 StatRxMulticastOkCts;
- SK_U64 StatRxUnicastOkCts;
- SK_U64 StatRxLongFramesCts;
- SK_U64 StatRxPauseMacCtrlCts;
- SK_U64 StatRxMacCtrlCts;
- SK_U64 StatRxPauseMacCtrlErrorCts;
- SK_U64 StatRxMacCtrlUnknownCts;
- SK_U64 StatRxBurstCts;
- SK_U64 StatRxMissedCts;
- SK_U64 StatRxFramingCts;
- SK_U64 StatRxFifoOverflowCts;
- SK_U64 StatRxJabberCts;
- SK_U64 StatRxCarrierCts;
- SK_U64 StatRxIRLengthCts;
- SK_U64 StatRxSymbolCts;
- SK_U64 StatRxShortsCts;
- SK_U64 StatRxRuntCts;
- SK_U64 StatRxCextCts;
- SK_U64 StatRxTooLongCts;
- SK_U64 StatRxFcsCts;
- SK_U64 Dummy2; /* StatRxUtilization */
- SK_U64 StatRx64Cts;
- SK_U64 StatRx127Cts;
- SK_U64 StatRx255Cts;
- SK_U64 StatRx511Cts;
- SK_U64 StatRx1023Cts;
- SK_U64 StatRxMaxCts;
-} SK_PNMI_STAT;
-
-typedef struct s_PnmiConf {
- char ConfMacCurrentAddr[6];
- char ConfMacFactoryAddr[6];
- SK_U8 ConfPMD;
- SK_U8 ConfConnector;
- SK_U32 ConfPhyType;
- SK_U32 ConfPhyMode;
- SK_U8 ConfLinkCapability;
- SK_U8 ConfLinkMode;
- SK_U8 ConfLinkModeStatus;
- SK_U8 ConfLinkStatus;
- SK_U8 ConfFlowCtrlCapability;
- SK_U8 ConfFlowCtrlMode;
- SK_U8 ConfFlowCtrlStatus;
- SK_U8 ConfPhyOperationCapability;
- SK_U8 ConfPhyOperationMode;
- SK_U8 ConfPhyOperationStatus;
- SK_U8 ConfSpeedCapability;
- SK_U8 ConfSpeedMode;
- SK_U8 ConfSpeedStatus;
-} SK_PNMI_CONF;
-
-typedef struct s_PnmiRlmt {
- SK_U32 RlmtIndex;
- SK_U32 RlmtStatus;
- SK_U64 RlmtTxHelloCts;
- SK_U64 RlmtRxHelloCts;
- SK_U64 RlmtTxSpHelloReqCts;
- SK_U64 RlmtRxSpHelloCts;
-} SK_PNMI_RLMT;
-
-typedef struct s_PnmiRlmtMonitor {
- SK_U32 RlmtMonitorIndex;
- char RlmtMonitorAddr[6];
- SK_U64 RlmtMonitorErrorCts;
- SK_U64 RlmtMonitorTimestamp;
- SK_U8 RlmtMonitorAdmin;
-} SK_PNMI_RLMT_MONITOR;
-
-typedef struct s_PnmiRequestStatus {
- SK_U32 ErrorStatus;
- SK_U32 ErrorOffset;
-} SK_PNMI_REQUEST_STATUS;
-
-typedef struct s_PnmiStrucData {
- SK_U32 MgmtDBVersion;
- SK_PNMI_REQUEST_STATUS ReturnStatus;
- SK_U32 VpdFreeBytes;
- char VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE];
- SK_U32 VpdEntriesNumber;
- SK_PNMI_VPD Vpd[SK_PNMI_VPD_ENTRIES];
- SK_U32 PortNumber;
- SK_U32 DeviceType;
- char DriverDescr[SK_PNMI_STRINGLEN1];
- char DriverVersion[SK_PNMI_STRINGLEN2];
- char DriverReleaseDate[SK_PNMI_STRINGLEN1];
- char DriverFileName[SK_PNMI_STRINGLEN1];
- char HwDescr[SK_PNMI_STRINGLEN1];
- char HwVersion[SK_PNMI_STRINGLEN2];
- SK_U16 Chipset;
- SK_U32 ChipId;
- SK_U8 VauxAvail;
- SK_U32 RamSize;
- SK_U32 MtuSize;
- SK_U32 Action;
- SK_U32 TestResult;
- SK_U8 BusType;
- SK_U8 BusSpeed;
- SK_U8 BusWidth;
- SK_U8 SensorNumber;
- SK_PNMI_SENSOR Sensor[SK_PNMI_SENSOR_ENTRIES];
- SK_U8 ChecksumNumber;
- SK_PNMI_CHECKSUM Checksum[SK_PNMI_CHECKSUM_ENTRIES];
- SK_PNMI_STAT Stat[SK_PNMI_MAC_ENTRIES];
- SK_PNMI_CONF Conf[SK_PNMI_MAC_ENTRIES];
- SK_U8 RlmtMode;
- SK_U32 RlmtPortNumber;
- SK_U8 RlmtPortActive;
- SK_U8 RlmtPortPreferred;
- SK_U64 RlmtChangeCts;
- SK_U64 RlmtChangeTime;
- SK_U64 RlmtChangeEstimate;
- SK_U64 RlmtChangeThreshold;
- SK_PNMI_RLMT Rlmt[SK_MAX_MACS];
- SK_U32 RlmtMonitorNumber;
- SK_PNMI_RLMT_MONITOR RlmtMonitor[SK_PNMI_MONITOR_ENTRIES];
- SK_U32 TrapNumber;
- SK_U8 Trap[SK_PNMI_TRAP_QUEUE_LEN];
- SK_U64 TxSwQueueLen;
- SK_U64 TxSwQueueMax;
- SK_U64 TxRetryCts;
- SK_U64 RxIntrCts;
- SK_U64 TxIntrCts;
- SK_U64 RxNoBufCts;
- SK_U64 TxNoBufCts;
- SK_U64 TxUsedDescrNo;
- SK_U64 RxDeliveredCts;
- SK_U64 RxOctetsDeliveredCts;
- SK_U64 RxHwErrorsCts;
- SK_U64 TxHwErrorsCts;
- SK_U64 InErrorsCts;
- SK_U64 OutErrorsCts;
- SK_U64 ErrRecoveryCts;
- SK_U64 SysUpTime;
-} SK_PNMI_STRUCT_DATA;
-
-#define SK_PNMI_STRUCT_SIZE (sizeof(SK_PNMI_STRUCT_DATA))
-#define SK_PNMI_MIN_STRUCT_SIZE ((unsigned int)(SK_UPTR)\
- &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes))
- /*
- * ReturnStatus field
- * must be located
- * before VpdFreeBytes
- */
-
-/*
- * Various definitions
- */
-#define SK_PNMI_MAX_PROTOS 3
-
-#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum
- * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
- * for check while init phase 1
- */
-
-/*
- * Estimate data structure
- */
-typedef struct s_PnmiEstimate {
- unsigned int EstValueIndex;
- SK_U64 EstValue[7];
- SK_U64 Estimate;
- SK_TIMER EstTimer;
-} SK_PNMI_ESTIMATE;
-
-
-/*
- * VCT timer data structure
- */
-typedef struct s_VctTimer {
- SK_TIMER VctTimer;
-} SK_PNMI_VCT_TIMER;
-
-
-/*
- * PNMI specific adapter context structure
- */
-typedef struct s_PnmiPort {
- SK_U64 StatSyncCts;
- SK_U64 StatSyncOctetsCts;
- SK_U64 StatRxLongFrameCts;
- SK_U64 StatRxFrameTooLongCts;
- SK_U64 StatRxPMaccErr;
- SK_U64 TxSwQueueLen;
- SK_U64 TxSwQueueMax;
- SK_U64 TxRetryCts;
- SK_U64 RxIntrCts;
- SK_U64 TxIntrCts;
- SK_U64 RxNoBufCts;
- SK_U64 TxNoBufCts;
- SK_U64 TxUsedDescrNo;
- SK_U64 RxDeliveredCts;
- SK_U64 RxOctetsDeliveredCts;
- SK_U64 RxHwErrorsCts;
- SK_U64 TxHwErrorsCts;
- SK_U64 InErrorsCts;
- SK_U64 OutErrorsCts;
- SK_U64 ErrRecoveryCts;
- SK_U64 RxShortZeroMark;
- SK_U64 CounterOffset[SK_PNMI_CNT_NO];
- SK_U32 CounterHigh[SK_PNMI_CNT_NO];
- SK_BOOL ActiveFlag;
- SK_U8 Align[3];
-} SK_PNMI_PORT;
-
-
-typedef struct s_PnmiData {
- SK_PNMI_PORT Port [SK_MAX_MACS];
- SK_PNMI_PORT BufPort [SK_MAX_MACS]; /* 2002-09-13 pweber */
- SK_U64 VirtualCounterOffset[SK_PNMI_CNT_NO];
- SK_U32 TestResult;
- char HwVersion[10];
- SK_U16 Align01;
-
- char *pDriverDescription;
- char *pDriverVersion;
- char *pDriverReleaseDate;
- char *pDriverFileName;
-
- int MacUpdatedFlag;
- int RlmtUpdatedFlag;
- int SirqUpdatedFlag;
-
- SK_U64 RlmtChangeCts;
- SK_U64 RlmtChangeTime;
- SK_PNMI_ESTIMATE RlmtChangeEstimate;
- SK_U64 RlmtChangeThreshold;
-
- SK_U64 StartUpTime;
- SK_U32 DeviceType;
- char PciBusSpeed;
- char PciBusWidth;
- char Chipset;
- char PMD;
- char Connector;
- SK_BOOL DualNetActiveFlag;
- SK_U16 Align02;
-
- char TrapBuf[SK_PNMI_TRAP_QUEUE_LEN];
- unsigned int TrapBufFree;
- unsigned int TrapQueueBeg;
- unsigned int TrapQueueEnd;
- unsigned int TrapBufPad;
- unsigned int TrapUnique;
- SK_U8 VctStatus[SK_MAX_MACS];
- SK_PNMI_VCT VctBackup[SK_MAX_MACS];
- SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
-#ifdef SK_DIAG_SUPPORT
- SK_U32 DiagAttached;
-#endif /* SK_DIAG_SUPPORT */
-} SK_PNMI;
-
-
-/*
- * Function prototypes
- */
-extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level);
-extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
- unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
-extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
- unsigned int *pLen, SK_U32 NetIndex);
-extern int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
- unsigned int *pLen, SK_U32 NetIndex);
-extern int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
- unsigned int *pLen, SK_U32 NetIndex);
-extern int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event,
- SK_EVPARA Param);
-extern int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf,
- unsigned int * pLen, SK_U32 NetIndex);
-
-#endif
diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
deleted file mode 100644
index 3eec6274e413ca1da41498a4fb514c2b6a0392a3..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skgesirq.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
- *
- * Name: skgesirq.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.30 $
- * Date: $Date: 2003/07/04 12:34:13 $
- * Purpose: SK specific Gigabit Ethernet special IRQ functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _INC_SKGESIRQ_H_
-#define _INC_SKGESIRQ_H_
-
-/* Define return codes of SkGePortCheckUp and CheckShort */
-#define SK_HW_PS_NONE 0 /* No action needed */
-#define SK_HW_PS_RESTART 1 /* Restart needed */
-#define SK_HW_PS_LINK 2 /* Link Up actions needed */
-
-/*
- * Define the Event the special IRQ/INI module can handle
- */
-#define SK_HWEV_WATIM 1 /* Timeout for WA Errata #2 XMAC */
-#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */
-#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */
-#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */
-#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */
-#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */
-#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */
-#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */
-#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */
-#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */
-
-#define SK_WA_ACT_TIME (5000000UL) /* 5 sec */
-#define SK_WA_INA_TIME (100000UL) /* 100 msec */
-
-#define SK_HALFDUP_CHK_TIME (10000UL) /* 10 msec */
-
-/*
- * Define the error numbers and messages
- */
-#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0)
-#define SKERR_SIRQ_E001MSG "Unknown event"
-#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1)
-#define SKERR_SIRQ_E002MSG "Packet timeout RX1"
-#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1)
-#define SKERR_SIRQ_E003MSG "Packet timeout RX2"
-#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1)
-#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized"
-#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1)
-#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized"
-#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1)
-#define SKERR_SIRQ_E006MSG "CHECK failure R1"
-#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1)
-#define SKERR_SIRQ_E007MSG "CHECK failure R2"
-#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1)
-#define SKERR_SIRQ_E008MSG "CHECK failure XS1"
-#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1)
-#define SKERR_SIRQ_E009MSG "CHECK failure XA1"
-#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1)
-#define SKERR_SIRQ_E010MSG "CHECK failure XS2"
-#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1)
-#define SKERR_SIRQ_E011MSG "CHECK failure XA2"
-#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1)
-#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error"
-#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1)
-#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error"
-#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1)
-#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)"
-#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1)
-#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)"
-#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1)
-#define SKERR_SIRQ_E016MSG "Parity error MAC 1"
-#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1)
-#define SKERR_SIRQ_E017MSG "Parity error MAC 2"
-#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1)
-#define SKERR_SIRQ_E018MSG "Parity error RX 1"
-#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1)
-#define SKERR_SIRQ_E019MSG "Parity error RX 2"
-#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1)
-#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun"
-#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1)
-#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt"
-#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1)
-#define SKERR_SIRQ_E022MSG "Cable pair swap error"
-#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1)
-#define SKERR_SIRQ_E023MSG "Auto-negotiation error"
-#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1)
-#define SKERR_SIRQ_E024MSG "FIFO overflow error"
-#define SKERR_SIRQ_E025 (SKERR_SIRQ_E024+1)
-#define SKERR_SIRQ_E025MSG "2 Pair Downshift detected"
-
-extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
-extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
-
-#endif /* _INC_SKGESIRQ_H_ */
diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
deleted file mode 100644
index 6a63f4a15de6fff4647c5441bb735d323c03417c..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/ski2c.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/******************************************************************************
- *
- * Name: ski2c.h
- * Project: Gigabit Ethernet Adapters, TWSI-Module
- * Version: $Revision: 1.35 $
- * Date: $Date: 2003/10/20 09:06:30 $
- * Purpose: Defines to access Voltage and Temperature Sensor
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKI2C.H contains all I2C specific defines
- */
-
-#ifndef _SKI2C_H_
-#define _SKI2C_H_
-
-typedef struct s_Sensor SK_SENSOR;
-
-#include "h/skgei2c.h"
-
-/*
- * Define the I2C events.
- */
-#define SK_I2CEV_IRQ 1 /* IRQ happened Event */
-#define SK_I2CEV_TIM 2 /* Timeout event */
-#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */
-
-/*
- * Define READ and WRITE Constants.
- */
-#define I2C_READ 0
-#define I2C_WRITE 1
-#define I2C_BURST 1
-#define I2C_SINGLE 0
-
-#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0)
-#define SKERR_I2C_E001MSG "Sensor index unknown"
-#define SKERR_I2C_E002 (SKERR_I2C_E001+1)
-#define SKERR_I2C_E002MSG "TWSI: transfer does not complete"
-#define SKERR_I2C_E003 (SKERR_I2C_E002+1)
-#define SKERR_I2C_E003MSG "LM80: NAK on device send"
-#define SKERR_I2C_E004 (SKERR_I2C_E003+1)
-#define SKERR_I2C_E004MSG "LM80: NAK on register send"
-#define SKERR_I2C_E005 (SKERR_I2C_E004+1)
-#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send"
-#define SKERR_I2C_E006 (SKERR_I2C_E005+1)
-#define SKERR_I2C_E006MSG "Unknown event"
-#define SKERR_I2C_E007 (SKERR_I2C_E006+1)
-#define SKERR_I2C_E007MSG "LM80 read out of state"
-#define SKERR_I2C_E008 (SKERR_I2C_E007+1)
-#define SKERR_I2C_E008MSG "Unexpected sensor read completed"
-#define SKERR_I2C_E009 (SKERR_I2C_E008+1)
-#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range"
-#define SKERR_I2C_E010 (SKERR_I2C_E009+1)
-#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range"
-#define SKERR_I2C_E011 (SKERR_I2C_E010+1)
-#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range"
-#define SKERR_I2C_E012 (SKERR_I2C_E011+1)
-#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range"
-#define SKERR_I2C_E013 (SKERR_I2C_E012+1)
-#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor"
-#define SKERR_I2C_E014 (SKERR_I2C_E013+1)
-#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range"
-#define SKERR_I2C_E015 (SKERR_I2C_E014+1)
-#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range"
-#define SKERR_I2C_E016 (SKERR_I2C_E015+1)
-#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete"
-
-/*
- * Define Timeout values
- */
-#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */
-#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */
-#define SK_I2C_TIM_WATCH 1000000L /* 1 second */
-
-/*
- * Define trap and error log hold times
- */
-#ifndef SK_SEN_ERR_TR_HOLD
-#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC)
-#endif
-#ifndef SK_SEN_ERR_LOG_HOLD
-#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC)
-#endif
-#ifndef SK_SEN_WARN_TR_HOLD
-#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC)
-#endif
-#ifndef SK_SEN_WARN_LOG_HOLD
-#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC)
-#endif
-
-/*
- * Defines for SenType
- */
-#define SK_SEN_UNKNOWN 0
-#define SK_SEN_TEMP 1
-#define SK_SEN_VOLT 2
-#define SK_SEN_FAN 3
-
-/*
- * Define for the SenErrorFlag
- */
-#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */
-#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */
-#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */
-#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */
-#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */
-
-/*
- * Define the Sensor struct
- */
-struct s_Sensor {
- char *SenDesc; /* Description */
- int SenType; /* Voltage or Temperature */
- SK_I32 SenValue; /* Current value of the sensor */
- SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */
- SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */
- SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */
- SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */
- int SenErrFlag; /* Sensor indicated an error */
- SK_BOOL SenInit; /* Is sensor initialized ? */
- SK_U64 SenErrCts; /* Error trap counter */
- SK_U64 SenWarnCts; /* Warning trap counter */
- SK_U64 SenBegErrTS; /* Begin error timestamp */
- SK_U64 SenBegWarnTS; /* Begin warning timestamp */
- SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */
- SK_U64 SenLastErrLogTS; /* Last error log timestamp */
- SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */
- SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */
- int SenState; /* Sensor State (see HW specific include) */
- int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
- /* Sensors read function */
- SK_U16 SenReg; /* Register Address for this sensor */
- SK_U8 SenDev; /* Device Selection for this sensor */
-};
-
-typedef struct s_I2c {
- SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */
- int CurrSens; /* Which sensor is currently queried */
- int MaxSens; /* Max. number of sensors */
- int TimerMode; /* Use the timer also to watch the state machine */
- int InitLevel; /* Initialized Level */
-#ifndef SK_DIAG
- int DummyReads; /* Number of non-checked dummy reads */
- SK_TIMER SenTimer; /* Sensors timer */
-#endif /* !SK_DIAG */
-} SK_I2C;
-
-extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
-#ifdef SK_DIAG
-extern SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg,
- int Burst);
-#else /* !SK_DIAG */
-extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
-extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
-#endif /* !SK_DIAG */
-#endif /* n_SKI2C_H */
-
diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h
deleted file mode 100644
index 2ec40d4fdf60851f2dd0d29a3f999d536abda6aa..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skqueue.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/******************************************************************************
- *
- * Name: skqueue.h
- * Project: Gigabit Ethernet Adapters, Event Scheduler Module
- * Version: $Revision: 1.16 $
- * Date: $Date: 2003/09/16 12:50:32 $
- * Purpose: Defines for the Event queue
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKQUEUE.H contains all defines and types for the event queue
- */
-
-#ifndef _SKQUEUE_H_
-#define _SKQUEUE_H_
-
-
-/*
- * define the event classes to be served
- */
-#define SKGE_DRV 1 /* Driver Event Class */
-#define SKGE_RLMT 2 /* RLMT Event Class */
-#define SKGE_I2C 3 /* I2C Event Class */
-#define SKGE_PNMI 4 /* PNMI Event Class */
-#define SKGE_CSUM 5 /* Checksum Event Class */
-#define SKGE_HWAC 6 /* Hardware Access Event Class */
-
-#define SKGE_SWT 9 /* Software Timer Event Class */
-#define SKGE_LACP 10 /* LACP Aggregation Event Class */
-#define SKGE_RSF 11 /* RSF Aggregation Event Class */
-#define SKGE_MARKER 12 /* MARKER Aggregation Event Class */
-#define SKGE_FD 13 /* FD Distributor Event Class */
-
-/*
- * define event queue as circular buffer
- */
-#define SK_MAX_EVENT 64
-
-/*
- * Parameter union for the Para stuff
- */
-typedef union u_EvPara {
- void *pParaPtr; /* Parameter Pointer */
- SK_U64 Para64; /* Parameter 64bit version */
- SK_U32 Para32[2]; /* Parameter Array of 32bit parameters */
-} SK_EVPARA;
-
-/*
- * Event Queue
- * skqueue.c
- * events are class/value pairs
- * class is addressee, e.g. RLMT, PNMI etc.
- * value is command, e.g. line state change, ring op change etc.
- */
-typedef struct s_EventElem {
- SK_U32 Class; /* Event class */
- SK_U32 Event; /* Event value */
- SK_EVPARA Para; /* Event parameter */
-} SK_EVENTELEM;
-
-typedef struct s_Queue {
- SK_EVENTELEM EvQueue[SK_MAX_EVENT];
- SK_EVENTELEM *EvPut;
- SK_EVENTELEM *EvGet;
-} SK_QUEUE;
-
-extern void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level);
-extern void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event,
- SK_EVPARA Para);
-extern int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc);
-
-
-/* Define Error Numbers and messages */
-#define SKERR_Q_E001 (SK_ERRBASE_QUEUE+0)
-#define SKERR_Q_E001MSG "Event queue overflow"
-#define SKERR_Q_E002 (SKERR_Q_E001+1)
-#define SKERR_Q_E002MSG "Undefined event class"
-#endif /* _SKQUEUE_H_ */
-
diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h
deleted file mode 100644
index ca75dfdcf2d6a4e1e1fd7dd7dbd4e95690836193..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skrlmt.h
+++ /dev/null
@@ -1,438 +0,0 @@
-/******************************************************************************
- *
- * Name: skrlmt.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.37 $
- * Date: $Date: 2003/04/15 09:43:43 $
- * Purpose: Header file for Redundant Link ManagemenT.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the header file for Redundant Link ManagemenT.
- *
- * Include File Hierarchy:
- *
- * "skdrv1st.h"
- * ...
- * "sktypes.h"
- * "skqueue.h"
- * "skaddr.h"
- * "skrlmt.h"
- * ...
- * "skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKRLMT_H
-#define __INC_SKRLMT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_RLMT_NET_DOWN_TEMP 1 /* NET_DOWN due to last port down. */
-#define SK_RLMT_NET_DOWN_FINAL 2 /* NET_DOWN due to RLMT_STOP. */
-
-/* ----- Default queue sizes - must be multiples of 8 KB ----- */
-
-/* Less than 8 KB free in RX queue => pause frames. */
-#define SK_RLMT_STANDBY_QRXSIZE 128 /* Size of rx standby queue in KB. */
-#define SK_RLMT_STANDBY_QXASIZE 32 /* Size of async standby queue in KB. */
-#define SK_RLMT_STANDBY_QXSSIZE 0 /* Size of sync standby queue in KB. */
-
-#define SK_RLMT_MAX_TX_BUF_SIZE 60 /* Maximum RLMT transmit size. */
-
-/* ----- PORT states ----- */
-
-#define SK_RLMT_PS_INIT 0 /* Port state: Init. */
-#define SK_RLMT_PS_LINK_DOWN 1 /* Port state: Link down. */
-#define SK_RLMT_PS_DOWN 2 /* Port state: Port down. */
-#define SK_RLMT_PS_GOING_UP 3 /* Port state: Going up. */
-#define SK_RLMT_PS_UP 4 /* Port state: Up. */
-
-/* ----- RLMT states ----- */
-
-#define SK_RLMT_RS_INIT 0 /* RLMT state: Init. */
-#define SK_RLMT_RS_NET_DOWN 1 /* RLMT state: Net down. */
-#define SK_RLMT_RS_NET_UP 2 /* RLMT state: Net up. */
-
-/* ----- PORT events ----- */
-
-#define SK_RLMT_LINK_UP 1001 /* Link came up. */
-#define SK_RLMT_LINK_DOWN 1002 /* Link went down. */
-#define SK_RLMT_PORT_ADDR 1003 /* Port address changed. */
-
-/* ----- RLMT events ----- */
-
-#define SK_RLMT_START 2001 /* Start RLMT. */
-#define SK_RLMT_STOP 2002 /* Stop RLMT. */
-#define SK_RLMT_PACKET_RECEIVED 2003 /* Packet was received for RLMT. */
-#define SK_RLMT_STATS_CLEAR 2004 /* Clear statistics. */
-#define SK_RLMT_STATS_UPDATE 2005 /* Update statistics. */
-#define SK_RLMT_PREFPORT_CHANGE 2006 /* Change preferred port. */
-#define SK_RLMT_MODE_CHANGE 2007 /* New RlmtMode. */
-#define SK_RLMT_SET_NETS 2008 /* Number of Nets (1 or 2). */
-
-/* ----- RLMT mode bits ----- */
-
-/*
- * CAUTION: These defines are private to RLMT.
- * Please use the RLMT mode defines below.
- */
-
-#define SK_RLMT_CHECK_LINK 1 /* Check Link. */
-#define SK_RLMT_CHECK_LOC_LINK 2 /* Check other link on same adapter. */
-#define SK_RLMT_CHECK_SEG 4 /* Check segmentation. */
-
-#ifndef RLMT_CHECK_REMOTE
-#define SK_RLMT_CHECK_OTHERS SK_RLMT_CHECK_LOC_LINK
-#else /* RLMT_CHECK_REMOTE */
-#define SK_RLMT_CHECK_REM_LINK 8 /* Check link(s) on other adapter(s). */
-#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED 3
-#define SK_RLMT_CHECK_OTHERS \
- (SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
-#endif /* RLMT_CHECK_REMOTE */
-
-#ifndef SK_RLMT_ENABLE_TRANSPARENT
-#define SK_RLMT_TRANSPARENT 0 /* RLMT transparent - inactive. */
-#else /* SK_RLMT_ENABLE_TRANSPARENT */
-#define SK_RLMT_TRANSPARENT 128 /* RLMT transparent. */
-#endif /* SK_RLMT_ENABLE_TRANSPARENT */
-
-/* ----- RLMT modes ----- */
-
-/* Check Link State. */
-#define SK_RLMT_MODE_CLS (SK_RLMT_CHECK_LINK)
-
-/* Check Local Ports: check other links on the same adapter. */
-#define SK_RLMT_MODE_CLP (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK)
-
-/* Check Local Ports and Segmentation Status. */
-#define SK_RLMT_MODE_CLPSS \
- (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG)
-
-#ifdef RLMT_CHECK_REMOTE
-/* Check Local and Remote Ports: check links (local or remote). */
- Name of define TBD!
-#define SK_RLMT_MODE_CRP \
- (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
-
-/* Check Local and Remote Ports and Segmentation Status. */
- Name of define TBD!
-#define SK_RLMT_MODE_CRPSS \
- (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \
- SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG)
-#endif /* RLMT_CHECK_REMOTE */
-
-/* ----- RLMT lookahead result bits ----- */
-
-#define SK_RLMT_RX_RLMT 1 /* Give packet to RLMT. */
-#define SK_RLMT_RX_PROTOCOL 2 /* Give packet to protocol. */
-
-/* Macros */
-
-#if 0
-SK_AC *pAC /* adapter context */
-SK_U32 PortNum /* receiving port */
-unsigned PktLen /* received packet's length */
-SK_BOOL IsBc /* Flag: packet is broadcast */
-unsigned *pOffset /* offs. of bytes to present to SK_RLMT_LOOKAHEAD */
-unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */
-#endif /* 0 */
-
-#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \
- SK_AC *_pAC; \
- SK_U32 _PortNum; \
- _pAC = (pAC); \
- _PortNum = (SK_U32)(PortNum); \
- /* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \
- _pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \
- if (_pAC->Rlmt.RlmtOff) { \
- *(pNumBytes) = 0; \
- } \
- else {\
- if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
- *(pNumBytes) = 0; \
- } \
- else if (IsBc) { \
- if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
- *(pNumBytes) = 6; \
- *(pOffset) = 6; \
- } \
- else { \
- *(pNumBytes) = 0; \
- } \
- } \
- else { \
- if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
- /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
- *(pNumBytes) = 0; \
- } \
- else { \
- *(pNumBytes) = 6; \
- *(pOffset) = 0; \
- } \
- } \
- } \
-}
-
-#if 0
-SK_AC *pAC /* adapter context */
-SK_U32 PortNum /* receiving port */
-SK_U8 *pLaPacket, /* received packet's data (points to pOffset) */
-SK_BOOL IsBc /* Flag: packet is broadcast */
-SK_BOOL IsMc /* Flag: packet is multicast */
-unsigned *pForRlmt /* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */
-SK_RLMT_LOOKAHEAD() expects *pNumBytes from
-packet offset *pOffset (s.a.) at *pLaPacket.
-
-If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is
-BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler
-can trash unneeded parts of the if construction.
-#endif /* 0 */
-
-#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \
- SK_AC *_pAC; \
- SK_U32 _PortNum; \
- SK_U8 *_pLaPacket; \
- _pAC = (pAC); \
- _PortNum = (SK_U32)(PortNum); \
- _pLaPacket = (SK_U8 *)(pLaPacket); \
- if (IsBc) {\
- if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \
- _PortNum].Net->NetNumber].CurrentMacAddress.a)) { \
- _pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \
- _pAC->Rlmt.CheckSwitch = SK_TRUE; \
- } \
- /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
- *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
- } \
- else if (IsMc) { \
- if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \
- _pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \
- if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \
- *(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \
- } \
- else { \
- *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
- } \
- } \
- else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \
- *(pForRlmt) = SK_RLMT_RX_RLMT; \
- } \
- else { \
- /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
- *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
- } \
- } \
- else { \
- if (SK_ADDR_EQUAL( \
- _pLaPacket, \
- _pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \
- *(pForRlmt) = SK_RLMT_RX_RLMT; \
- } \
- else { \
- /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
- *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
- } \
- } \
-}
-
-#ifdef SK_RLMT_FAST_LOOKAHEAD
-Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead.
-#endif /* SK_RLMT_FAST_LOOKAHEAD */
-#ifdef SK_RLMT_SLOW_LOOKAHEAD
-Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead.
-#endif /* SK_RLMT_SLOW_LOOKAHEAD */
-
-/* typedefs *******************************************************************/
-
-#ifdef SK_RLMT_MBUF_PRIVATE
-typedef struct s_RlmtMbuf {
- some content
-} SK_RLMT_MBUF;
-#endif /* SK_RLMT_MBUF_PRIVATE */
-
-
-#ifdef SK_LA_INFO
-typedef struct s_Rlmt_PacketInfo {
- unsigned PacketLength; /* Length of packet. */
- unsigned PacketType; /* Directed/Multicast/Broadcast. */
-} SK_RLMT_PINFO;
-#endif /* SK_LA_INFO */
-
-
-typedef struct s_RootId {
- SK_U8 Id[8]; /* Root Bridge Id. */
-} SK_RLMT_ROOT_ID;
-
-
-typedef struct s_port {
- SK_MAC_ADDR CheckAddr;
- SK_BOOL SuspectTx;
-} SK_PORT_CHECK;
-
-
-typedef struct s_RlmtNet SK_RLMT_NET;
-
-
-typedef struct s_RlmtPort {
-
-/* ----- Public part (read-only) ----- */
-
- SK_U8 PortState; /* Current state of this port. */
-
- /* For PNMI */
- SK_BOOL LinkDown;
- SK_BOOL PortDown;
- SK_U8 Align01;
-
- SK_U32 PortNumber; /* Number of port on adapter. */
- SK_RLMT_NET * Net; /* Net port belongs to. */
-
- SK_U64 TxHelloCts;
- SK_U64 RxHelloCts;
- SK_U64 TxSpHelloReqCts;
- SK_U64 RxSpHelloCts;
-
-/* ----- Private part ----- */
-
-/* SK_U64 PacketsRx; */ /* Total packets received. */
- SK_U32 PacketsPerTimeSlot; /* Packets rxed between TOs. */
-/* SK_U32 DataPacketsPerTimeSlot; */ /* Data packets ... */
- SK_U32 BpduPacketsPerTimeSlot; /* BPDU packets rxed in TS. */
- SK_U64 BcTimeStamp; /* Time of last BC receive. */
- SK_U64 GuTimeStamp; /* Time of entering GOING_UP. */
-
- SK_TIMER UpTimer; /* Timer struct Link/Port up. */
- SK_TIMER DownRxTimer; /* Timer struct down rx. */
- SK_TIMER DownTxTimer; /* Timer struct down tx. */
-
- SK_U32 CheckingState; /* Checking State. */
-
- SK_ADDR_PORT * AddrPort;
-
- SK_U8 Random[4]; /* Random value. */
- unsigned PortsChecked; /* #ports checked. */
- unsigned PortsSuspect; /* #ports checked that are s. */
- SK_PORT_CHECK PortCheck[1];
-/* SK_PORT_CHECK PortCheck[SK_MAX_MACS - 1]; */
-
- SK_BOOL PortStarted; /* Port is started. */
- SK_BOOL PortNoRx; /* NoRx for >= 1 time slot. */
- SK_BOOL RootIdSet;
- SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */
-} SK_RLMT_PORT;
-
-
-struct s_RlmtNet {
-
-/* ----- Public part (read-only) ----- */
-
- SK_U32 NetNumber; /* Number of net. */
-
- SK_RLMT_PORT * Port[SK_MAX_MACS]; /* Ports that belong to this net. */
- SK_U32 NumPorts; /* Number of ports. */
- SK_U32 PrefPort; /* Preferred port. */
-
- /* For PNMI */
-
- SK_U32 ChgBcPrio; /* Change Priority of last broadcast received */
- SK_U32 RlmtMode; /* Check ... */
- SK_U32 ActivePort; /* Active port. */
- SK_U32 Preference; /* 0xFFFFFFFF: Automatic. */
-
- SK_U8 RlmtState; /* Current RLMT state. */
-
-/* ----- Private part ----- */
- SK_BOOL RootIdSet;
- SK_U16 Align01;
-
- int LinksUp; /* #Links up. */
- int PortsUp; /* #Ports up. */
- SK_U32 TimeoutValue; /* RLMT timeout value. */
-
- SK_U32 CheckingState; /* Checking State. */
- SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */
-
- SK_TIMER LocTimer; /* Timer struct. */
- SK_TIMER SegTimer; /* Timer struct. */
-};
-
-
-typedef struct s_Rlmt {
-
-/* ----- Public part (read-only) ----- */
-
- SK_U32 NumNets; /* Number of nets. */
- SK_U32 NetsStarted; /* Number of nets started. */
- SK_RLMT_NET Net[SK_MAX_NETS]; /* Array of available nets. */
- SK_RLMT_PORT Port[SK_MAX_MACS]; /* Array of available ports. */
-
-/* ----- Private part ----- */
- SK_BOOL CheckSwitch;
- SK_BOOL RlmtOff; /* set to zero if the Mac addresses
- are equal or the second one
- is zero */
- SK_U16 Align01;
-
-} SK_RLMT;
-
-
-extern SK_MAC_ADDR BridgeMcAddr;
-extern SK_MAC_ADDR SkRlmtMcAddr;
-
-/* function prototypes ********************************************************/
-
-
-#ifndef SK_KR_PROTO
-
-/* Functions provided by SkRlmt */
-
-/* ANSI/C++ compliant function prototypes */
-
-extern void SkRlmtInit(
- SK_AC *pAC,
- SK_IOC IoC,
- int Level);
-
-extern int SkRlmtEvent(
- SK_AC *pAC,
- SK_IOC IoC,
- SK_U32 Event,
- SK_EVPARA Para);
-
-#else /* defined(SK_KR_PROTO) */
-
-/* Non-ANSI/C++ compliant function prototypes */
-
-#error KR-style function prototypes are not yet provided.
-
-#endif /* defined(SK_KR_PROTO)) */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __INC_SKRLMT_H */
diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h
deleted file mode 100644
index 04e6d7c1ec33730f5a67c39fa4f856f3df1d0102..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/sktimer.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/******************************************************************************
- *
- * Name: sktimer.h
- * Project: Gigabit Ethernet Adapters, Event Scheduler Module
- * Version: $Revision: 1.11 $
- * Date: $Date: 2003/09/16 12:58:18 $
- * Purpose: Defines for the timer functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKTIMER.H contains all defines and types for the timer functions
- */
-
-#ifndef _SKTIMER_H_
-#define _SKTIMER_H_
-
-#include "h/skqueue.h"
-
-/*
- * SK timer
- * - needed wherever a timer is used. Put this in your data structure
- * wherever you want.
- */
-typedef struct s_Timer SK_TIMER;
-
-struct s_Timer {
- SK_TIMER *TmNext; /* linked list */
- SK_U32 TmClass; /* Timer Event class */
- SK_U32 TmEvent; /* Timer Event value */
- SK_EVPARA TmPara; /* Timer Event parameter */
- SK_U32 TmDelta; /* delta time */
- int TmActive; /* flag: active/inactive */
-};
-
-/*
- * Timer control struct.
- * - use in Adapters context name pAC->Tim
- */
-typedef struct s_TimCtrl {
- SK_TIMER *StQueue; /* Head of Timer queue */
-} SK_TIMCTRL;
-
-extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level);
-extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer);
-extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer,
- SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para);
-extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc);
-#endif /* _SKTIMER_H_ */
diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h
deleted file mode 100644
index 40edc96e1055c8d9cca8141b4bcbdbde4566fccc..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/sktypes.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/******************************************************************************
- *
- * Name: sktypes.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.2 $
- * Date: $Date: 2003/10/07 08:16:51 $
- * Purpose: Define data types for Linux
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * In this file, all data types that are needed by the common modules
- * are mapped to Linux data types.
- *
- *
- * Include File Hierarchy:
- *
- *
- ******************************************************************************/
-
-#ifndef __INC_SKTYPES_H
-#define __INC_SKTYPES_H
-
-
-/* defines *******************************************************************/
-
-/*
- * Data types with a specific size. 'I' = signed, 'U' = unsigned.
- */
-#define SK_I8 s8
-#define SK_U8 u8
-#define SK_I16 s16
-#define SK_U16 u16
-#define SK_I32 s32
-#define SK_U32 u32
-#define SK_I64 s64
-#define SK_U64 u64
-
-#define SK_UPTR ulong /* casting pointer <-> integral */
-
-/*
-* Boolean type.
-*/
-#define SK_BOOL SK_U8
-#define SK_FALSE 0
-#define SK_TRUE (!SK_FALSE)
-
-/* typedefs *******************************************************************/
-
-/* function prototypes ********************************************************/
-
-#endif /* __INC_SKTYPES_H */
diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h
deleted file mode 100644
index a1a7294828e5007001874bb4c3aa19bbe95f795f..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skversion.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/******************************************************************************
- *
- * Name: version.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.5 $
- * Date: $Date: 2003/10/07 08:16:51 $
- * Purpose: SK specific Error log support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifdef lint
-static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
-static const char SysKonnectBuildNumber[] =
- "@(#)SK-BUILD: 6.23 PL: 01";
-#endif /* !defined(lint) */
-
-#define BOOT_STRING "sk98lin: Network Device Driver v6.23\n" \
- "(C)Copyright 1999-2004 Marvell(R)."
-
-#define VER_STRING "6.23"
-#define DRIVER_FILE_NAME "sk98lin"
-#define DRIVER_REL_DATE "Feb-13-2004"
-
-
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
deleted file mode 100644
index fdd9e48e80408da4c899a43732d6c7c970fe3c71..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/skvpd.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/******************************************************************************
- *
- * Name: skvpd.h
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.15 $
- * Date: $Date: 2003/01/13 10:39:38 $
- * Purpose: Defines and Macros for VPD handling
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2003 SysKonnect GmbH.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * skvpd.h contains Diagnostic specific defines for VPD handling
- */
-
-#ifndef __INC_SKVPD_H_
-#define __INC_SKVPD_H_
-
-/*
- * Define Resource Type Identifiers and VPD keywords
- */
-#define RES_ID 0x82 /* Resource Type ID String (Product Name) */
-#define RES_VPD_R 0x90 /* start of VPD read only area */
-#define RES_VPD_W 0x91 /* start of VPD read/write area */
-#define RES_END 0x78 /* Resource Type End Tag */
-
-#ifndef VPD_NAME
-#define VPD_NAME "Name" /* Product Name, VPD name of RES_ID */
-#endif /* VPD_NAME */
-#define VPD_PN "PN" /* Adapter Part Number */
-#define VPD_EC "EC" /* Adapter Engineering Level */
-#define VPD_MN "MN" /* Manufacture ID */
-#define VPD_SN "SN" /* Serial Number */
-#define VPD_CP "CP" /* Extended Capability */
-#define VPD_RV "RV" /* Checksum and Reserved */
-#define VPD_YA "YA" /* Asset Tag Identifier */
-#define VPD_VL "VL" /* First Error Log Message (SK specific) */
-#define VPD_VF "VF" /* Second Error Log Message (SK specific) */
-#define VPD_RW "RW" /* Remaining Read / Write Area */
-
-/* 'type' values for vpd_setup_para() */
-#define VPD_RO_KEY 1 /* RO keys are "PN", "EC", "MN", "SN", "RV" */
-#define VPD_RW_KEY 2 /* RW keys are "Yx", "Vx", and "RW" */
-
-/* 'op' values for vpd_setup_para() */
-#define ADD_KEY 1 /* add the key at the pos "RV" or "RW" */
-#define OWR_KEY 2 /* overwrite key if already exists */
-
-/*
- * Define READ and WRITE Constants.
- */
-
-#define VPD_DEV_ID_GENESIS 0x4300
-
-#define VPD_SIZE_YUKON 256
-#define VPD_SIZE_GENESIS 512
-#define VPD_SIZE 512
-#define VPD_READ 0x0000
-#define VPD_WRITE 0x8000
-
-#define VPD_STOP(pAC,IoC) VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE)
-
-#define VPD_GET_RES_LEN(p) ((unsigned int) \
- (* (SK_U8 *)&(p)[1]) |\
- ((* (SK_U8 *)&(p)[2]) << 8))
-#define VPD_GET_VPD_LEN(p) ((unsigned int)(* (SK_U8 *)&(p)[2]))
-#define VPD_GET_VAL(p) ((char *)&(p)[3])
-
-#define VPD_MAX_LEN 50
-
-/* VPD status */
- /* bit 7..1 reserved */
-#define VPD_VALID (1<<0) /* VPD data buffer, vpd_free_ro, */
- /* and vpd_free_rw valid */
-
-/*
- * VPD structs
- */
-typedef struct s_vpd_status {
- unsigned short Align01; /* Alignment */
- unsigned short vpd_status; /* VPD status, description see above */
- int vpd_free_ro; /* unused bytes in read only area */
- int vpd_free_rw; /* bytes available in read/write area */
-} SK_VPD_STATUS;
-
-typedef struct s_vpd {
- SK_VPD_STATUS v; /* VPD status structure */
- char vpd_buf[VPD_SIZE]; /* VPD buffer */
- int rom_size; /* VPD ROM Size from PCI_OUR_REG_2 */
- int vpd_size; /* saved VPD-size */
-} SK_VPD;
-
-typedef struct s_vpd_para {
- unsigned int p_len; /* parameter length */
- char *p_val; /* points to the value */
-} SK_VPD_PARA;
-
-/*
- * structure of Large Resource Type Identifiers
- */
-
-/* was removed because of alignment problems */
-
-/*
- * structure of VPD keywords
- */
-typedef struct s_vpd_key {
- char p_key[2]; /* 2 bytes ID string */
- unsigned char p_len; /* 1 byte length */
- char p_val; /* start of the value string */
-} SK_VPD_KEY;
-
-
-/*
- * System specific VPD macros
- */
-#ifndef SKDIAG
-#ifndef VPD_DO_IO
-#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val)
-#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val)
-#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal)
-#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal)
-#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal)
-#else /* VPD_DO_IO */
-#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val)
-#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val)
-#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal)
-#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal)
-#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal)
-#endif /* VPD_DO_IO */
-#else /* SKDIAG */
-#define VPD_OUT8(pAC,Ioc,Addr,Val) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
- SkPciWriteCfgByte(pAC,Addr,Val); \
- else \
- SK_OUT8(pAC,PCI_C(Addr),Val); \
- }
-#define VPD_OUT16(pAC,Ioc,Addr,Val) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
- SkPciWriteCfgWord(pAC,Addr,Val); \
- else \
- SK_OUT16(pAC,PCI_C(Addr),Val); \
- }
-#define VPD_IN8(pAC,Ioc,Addr,pVal) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
- SkPciReadCfgByte(pAC,Addr,pVal); \
- else \
- SK_IN8(pAC,PCI_C(Addr),pVal); \
- }
-#define VPD_IN16(pAC,Ioc,Addr,pVal) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
- SkPciReadCfgWord(pAC,Addr,pVal); \
- else \
- SK_IN16(pAC,PCI_C(Addr),pVal); \
- }
-#define VPD_IN32(pAC,Ioc,Addr,pVal) { \
- if ((pAC)->DgT.DgUseCfgCycle) \
- SkPciReadCfgDWord(pAC,Addr,pVal); \
- else \
- SK_IN32(pAC,PCI_C(Addr),pVal); \
- }
-#endif /* nSKDIAG */
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_KR_PROTO
-#ifdef SKDIAG
-extern SK_U32 VpdReadDWord(
- SK_AC *pAC,
- SK_IOC IoC,
- int addr);
-#endif /* SKDIAG */
-
-extern SK_VPD_STATUS *VpdStat(
- SK_AC *pAC,
- SK_IOC IoC);
-
-extern int VpdKeys(
- SK_AC *pAC,
- SK_IOC IoC,
- char *buf,
- int *len,
- int *elements);
-
-extern int VpdRead(
- SK_AC *pAC,
- SK_IOC IoC,
- const char *key,
- char *buf,
- int *len);
-
-extern SK_BOOL VpdMayWrite(
- char *key);
-
-extern int VpdWrite(
- SK_AC *pAC,
- SK_IOC IoC,
- const char *key,
- const char *buf);
-
-extern int VpdDelete(
- SK_AC *pAC,
- SK_IOC IoC,
- char *key);
-
-extern int VpdUpdate(
- SK_AC *pAC,
- SK_IOC IoC);
-
-#ifdef SKDIAG
-extern int VpdReadBlock(
- SK_AC *pAC,
- SK_IOC IoC,
- char *buf,
- int addr,
- int len);
-
-extern int VpdWriteBlock(
- SK_AC *pAC,
- SK_IOC IoC,
- char *buf,
- int addr,
- int len);
-#endif /* SKDIAG */
-#else /* SK_KR_PROTO */
-extern SK_U32 VpdReadDWord();
-extern SK_VPD_STATUS *VpdStat();
-extern int VpdKeys();
-extern int VpdRead();
-extern SK_BOOL VpdMayWrite();
-extern int VpdWrite();
-extern int VpdDelete();
-extern int VpdUpdate();
-#endif /* SK_KR_PROTO */
-
-#endif /* __INC_SKVPD_H_ */
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
deleted file mode 100644
index 7f8e6d0084c7a1b7503ad40f2c160af954d5a902..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/h/xmac_ii.h
+++ /dev/null
@@ -1,1579 +0,0 @@
-/******************************************************************************
- *
- * Name: xmac_ii.h
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.52 $
- * Date: $Date: 2003/10/02 16:35:50 $
- * Purpose: Defines and Macros for Gigabit Ethernet Controller
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_XMAC_H
-#define __INC_XMAC_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/* defines ********************************************************************/
-
-/*
- * XMAC II registers
- *
- * The XMAC registers are 16 or 32 bits wide.
- * The XMACs host processor interface is set to 16 bit mode,
- * therefore ALL registers will be addressed with 16 bit accesses.
- *
- * The following macros are provided to access the XMAC registers
- * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
- * XM_INHASH(), and XM_OUTHASH().
- * The macros are defined in SkGeHw.h.
- *
- * Note: NA reg = Network Address e.g DA, SA etc.
- *
- */
-#define XM_MMU_CMD 0x0000 /* 16 bit r/w MMU Command Register */
- /* 0x0004: reserved */
-#define XM_POFF 0x0008 /* 32 bit r/w Packet Offset Register */
-#define XM_BURST 0x000c /* 32 bit r/w Burst Register for half duplex*/
-#define XM_1L_VLAN_TAG 0x0010 /* 16 bit r/w One Level VLAN Tag ID */
-#define XM_2L_VLAN_TAG 0x0014 /* 16 bit r/w Two Level VLAN Tag ID */
- /* 0x0018 - 0x001e: reserved */
-#define XM_TX_CMD 0x0020 /* 16 bit r/w Transmit Command Register */
-#define XM_TX_RT_LIM 0x0024 /* 16 bit r/w Transmit Retry Limit Register */
-#define XM_TX_STIME 0x0028 /* 16 bit r/w Transmit Slottime Register */
-#define XM_TX_IPG 0x002c /* 16 bit r/w Transmit Inter Packet Gap */
-#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */
-#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */
-#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */
- /* 0x003c: reserved */
-#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */
-#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */
-#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */
-#define XM_HW_CFG 0x004c /* 16 bit r/w Hardware Config Register */
- /* 0x0050 - 0x005e: reserved */
-#define XM_TX_LO_WM 0x0060 /* 16 bit r/w Tx FIFO Low Water Mark */
-#define XM_TX_HI_WM 0x0062 /* 16 bit r/w Tx FIFO High Water Mark */
-#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */
-#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */
-#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */
- /* 0x006e: reserved */
-#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */
-#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */
-#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/
-#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */
-
- /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */
- /* use the XM_EXM() macro to address */
-#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */
-
- /*
- * XM_EXM(Reg)
- *
- * returns the XMAC address offset of specified Exact Match Addr Reg
- *
- * para: Reg EXM register to addr (0 .. 15)
- *
- * usage: XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
- */
-#define XM_EXM(Reg) (XM_EXM_START + ((Reg) << 3))
-
-#define XM_SRC_CHK 0x0100 /* NA reg r/w Source Check Address Register */
-#define XM_SA 0x0108 /* NA reg r/w Station Address Register */
-#define XM_HSM 0x0110 /* 64 bit r/w Hash Match Address Registers */
-#define XM_RX_LO_WM 0x0118 /* 16 bit r/w Receive Low Water Mark */
-#define XM_RX_HI_WM 0x011a /* 16 bit r/w Receive High Water Mark */
-#define XM_RX_THR 0x011c /* 32 bit r/w Receive Request Threshold */
-#define XM_DEV_ID 0x0120 /* 32 bit r/o Device ID Register */
-#define XM_MODE 0x0124 /* 32 bit r/w Mode Register */
-#define XM_LSA 0x0128 /* NA reg r/o Last Source Register */
- /* 0x012e: reserved */
-#define XM_TS_READ 0x0130 /* 32 bit r/o Time Stamp Read Register */
-#define XM_TS_LOAD 0x0134 /* 32 bit r/o Time Stamp Load Value */
- /* 0x0138 - 0x01fe: reserved */
-#define XM_STAT_CMD 0x0200 /* 16 bit r/w Statistics Command Register */
-#define XM_RX_CNT_EV 0x0204 /* 32 bit r/o Rx Counter Event Register */
-#define XM_TX_CNT_EV 0x0208 /* 32 bit r/o Tx Counter Event Register */
-#define XM_RX_EV_MSK 0x020c /* 32 bit r/w Rx Counter Event Mask */
-#define XM_TX_EV_MSK 0x0210 /* 32 bit r/w Tx Counter Event Mask */
- /* 0x0204 - 0x027e: reserved */
-#define XM_TXF_OK 0x0280 /* 32 bit r/o Frames Transmitted OK Conuter */
-#define XM_TXO_OK_HI 0x0284 /* 32 bit r/o Octets Transmitted OK High Cnt*/
-#define XM_TXO_OK_LO 0x0288 /* 32 bit r/o Octets Transmitted OK Low Cnt */
-#define XM_TXF_BC_OK 0x028c /* 32 bit r/o Broadcast Frames Xmitted OK */
-#define XM_TXF_MC_OK 0x0290 /* 32 bit r/o Multicast Frames Xmitted OK */
-#define XM_TXF_UC_OK 0x0294 /* 32 bit r/o Unicast Frames Xmitted OK */
-#define XM_TXF_LONG 0x0298 /* 32 bit r/o Tx Long Frame Counter */
-#define XM_TXE_BURST 0x029c /* 32 bit r/o Tx Burst Event Counter */
-#define XM_TXF_MPAUSE 0x02a0 /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */
-#define XM_TXF_MCTRL 0x02a4 /* 32 bit r/o Tx MAC Ctrl Frame Counter */
-#define XM_TXF_SNG_COL 0x02a8 /* 32 bit r/o Tx Single Collision Counter */
-#define XM_TXF_MUL_COL 0x02ac /* 32 bit r/o Tx Multiple Collision Counter */
-#define XM_TXF_ABO_COL 0x02b0 /* 32 bit r/o Tx aborted due to Exces. Col. */
-#define XM_TXF_LAT_COL 0x02b4 /* 32 bit r/o Tx Late Collision Counter */
-#define XM_TXF_DEF 0x02b8 /* 32 bit r/o Tx Deferred Frame Counter */
-#define XM_TXF_EX_DEF 0x02bc /* 32 bit r/o Tx Excessive Deferall Counter */
-#define XM_TXE_FIFO_UR 0x02c0 /* 32 bit r/o Tx FIFO Underrun Event Cnt */
-#define XM_TXE_CS_ERR 0x02c4 /* 32 bit r/o Tx Carrier Sense Error Cnt */
-#define XM_TXP_UTIL 0x02c8 /* 32 bit r/o Tx Utilization in % */
- /* 0x02cc - 0x02ce: reserved */
-#define XM_TXF_64B 0x02d0 /* 32 bit r/o 64 Byte Tx Frame Counter */
-#define XM_TXF_127B 0x02d4 /* 32 bit r/o 65-127 Byte Tx Frame Counter */
-#define XM_TXF_255B 0x02d8 /* 32 bit r/o 128-255 Byte Tx Frame Counter */
-#define XM_TXF_511B 0x02dc /* 32 bit r/o 256-511 Byte Tx Frame Counter */
-#define XM_TXF_1023B 0x02e0 /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/
-#define XM_TXF_MAX_SZ 0x02e4 /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/
- /* 0x02e8 - 0x02fe: reserved */
-#define XM_RXF_OK 0x0300 /* 32 bit r/o Frames Received OK */
-#define XM_RXO_OK_HI 0x0304 /* 32 bit r/o Octets Received OK High Cnt */
-#define XM_RXO_OK_LO 0x0308 /* 32 bit r/o Octets Received OK Low Counter*/
-#define XM_RXF_BC_OK 0x030c /* 32 bit r/o Broadcast Frames Received OK */
-#define XM_RXF_MC_OK 0x0310 /* 32 bit r/o Multicast Frames Received OK */
-#define XM_RXF_UC_OK 0x0314 /* 32 bit r/o Unicast Frames Received OK */
-#define XM_RXF_MPAUSE 0x0318 /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */
-#define XM_RXF_MCTRL 0x031c /* 32 bit r/o Rx MAC Ctrl Frame Counter */
-#define XM_RXF_INV_MP 0x0320 /* 32 bit r/o Rx invalid Pause Frame Cnt */
-#define XM_RXF_INV_MOC 0x0324 /* 32 bit r/o Rx Frames with inv. MAC Opcode*/
-#define XM_RXE_BURST 0x0328 /* 32 bit r/o Rx Burst Event Counter */
-#define XM_RXE_FMISS 0x032c /* 32 bit r/o Rx Missed Frames Event Cnt */
-#define XM_RXF_FRA_ERR 0x0330 /* 32 bit r/o Rx Framing Error Counter */
-#define XM_RXE_FIFO_OV 0x0334 /* 32 bit r/o Rx FIFO overflow Event Cnt */
-#define XM_RXF_JAB_PKT 0x0338 /* 32 bit r/o Rx Jabber Packet Frame Cnt */
-#define XM_RXE_CAR_ERR 0x033c /* 32 bit r/o Rx Carrier Event Error Cnt */
-#define XM_RXF_LEN_ERR 0x0340 /* 32 bit r/o Rx in Range Length Error */
-#define XM_RXE_SYM_ERR 0x0344 /* 32 bit r/o Rx Symbol Error Counter */
-#define XM_RXE_SHT_ERR 0x0348 /* 32 bit r/o Rx Short Event Error Cnt */
-#define XM_RXE_RUNT 0x034c /* 32 bit r/o Rx Runt Event Counter */
-#define XM_RXF_LNG_ERR 0x0350 /* 32 bit r/o Rx Frame too Long Error Cnt */
-#define XM_RXF_FCS_ERR 0x0354 /* 32 bit r/o Rx Frame Check Seq. Error Cnt */
- /* 0x0358 - 0x035a: reserved */
-#define XM_RXF_CEX_ERR 0x035c /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/
-#define XM_RXP_UTIL 0x0360 /* 32 bit r/o Rx Utilization in % */
- /* 0x0364 - 0x0366: reserved */
-#define XM_RXF_64B 0x0368 /* 32 bit r/o 64 Byte Rx Frame Counter */
-#define XM_RXF_127B 0x036c /* 32 bit r/o 65-127 Byte Rx Frame Counter */
-#define XM_RXF_255B 0x0370 /* 32 bit r/o 128-255 Byte Rx Frame Counter */
-#define XM_RXF_511B 0x0374 /* 32 bit r/o 256-511 Byte Rx Frame Counter */
-#define XM_RXF_1023B 0x0378 /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/
-#define XM_RXF_MAX_SZ 0x037c /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/
- /* 0x02e8 - 0x02fe: reserved */
-
-
-/*----------------------------------------------------------------------------*/
-/*
- * XMAC Bit Definitions
- *
- * If the bit access behaviour differs from the register access behaviour
- * (r/w, r/o) this is documented after the bit number.
- * The following bit access behaviours are used:
- * (sc) self clearing
- * (ro) read only
- */
-
-/* XM_MMU_CMD 16 bit r/w MMU Command Register */
- /* Bit 15..13: reserved */
-#define XM_MMU_PHY_RDY (1<<12) /* Bit 12: PHY Read Ready */
-#define XM_MMU_PHY_BUSY (1<<11) /* Bit 11: PHY Busy */
-#define XM_MMU_IGN_PF (1<<10) /* Bit 10: Ignore Pause Frame */
-#define XM_MMU_MAC_LB (1<<9) /* Bit 9: Enable MAC Loopback */
- /* Bit 8: reserved */
-#define XM_MMU_FRC_COL (1<<7) /* Bit 7: Force Collision */
-#define XM_MMU_SIM_COL (1<<6) /* Bit 6: Simulate Collision */
-#define XM_MMU_NO_PRE (1<<5) /* Bit 5: No MDIO Preamble */
-#define XM_MMU_GMII_FD (1<<4) /* Bit 4: GMII uses Full Duplex */
-#define XM_MMU_RAT_CTRL (1<<3) /* Bit 3: Enable Rate Control */
-#define XM_MMU_GMII_LOOP (1<<2) /* Bit 2: PHY is in Loopback Mode */
-#define XM_MMU_ENA_RX (1<<1) /* Bit 1: Enable Receiver */
-#define XM_MMU_ENA_TX (1<<0) /* Bit 0: Enable Transmitter */
-
-
-/* XM_TX_CMD 16 bit r/w Transmit Command Register */
- /* Bit 15..7: reserved */
-#define XM_TX_BK2BK (1<<6) /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/
-#define XM_TX_ENC_BYP (1<<5) /* Bit 5: Set Encoder in Bypass Mode */
-#define XM_TX_SAM_LINE (1<<4) /* Bit 4: (sc) Start utilization calculation */
-#define XM_TX_NO_GIG_MD (1<<3) /* Bit 3: Disable Carrier Extension */
-#define XM_TX_NO_PRE (1<<2) /* Bit 2: Disable Preamble Generation */
-#define XM_TX_NO_CRC (1<<1) /* Bit 1: Disable CRC Generation */
-#define XM_TX_AUTO_PAD (1<<0) /* Bit 0: Enable Automatic Padding */
-
-
-/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */
- /* Bit 15..5: reserved */
-#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */
-
-
-/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */
- /* Bit 15..7: reserved */
-#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */
-
-
-/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */
- /* Bit 15..8: reserved */
-#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */
-
-
-/* XM_RX_CMD 16 bit r/w Receive Command Register */
- /* Bit 15..9: reserved */
-#define XM_RX_LENERR_OK (1<<8) /* Bit 8 don't set Rx Err bit for */
- /* inrange error packets */
-#define XM_RX_BIG_PK_OK (1<<7) /* Bit 7 don't set Rx Err bit for */
- /* jumbo packets */
-#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */
-#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */
-#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */
-#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */
-#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */
-#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */
-#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */
-
-
-/* XM_PHY_ADDR 16 bit r/w PHY Address Register */
- /* Bit 15..5: reserved */
-#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */
-
-
-/* XM_GP_PORT 32 bit r/w General Purpose Port Register */
- /* Bit 31..7: reserved */
-#define XM_GP_ANIP (1L<<6) /* Bit 6: (ro) Auto-Neg. in progress */
-#define XM_GP_FRC_INT (1L<<5) /* Bit 5: (sc) Force Interrupt */
- /* Bit 4: reserved */
-#define XM_GP_RES_MAC (1L<<3) /* Bit 3: (sc) Reset MAC and FIFOs */
-#define XM_GP_RES_STAT (1L<<2) /* Bit 2: (sc) Reset the statistics module */
- /* Bit 1: reserved */
-#define XM_GP_INP_ASS (1L<<0) /* Bit 0: (ro) GP Input Pin asserted */
-
-
-/* XM_IMSK 16 bit r/w Interrupt Mask Register */
-/* XM_ISRC 16 bit r/o Interrupt Status Register */
- /* Bit 15: reserved */
-#define XM_IS_LNK_AE (1<<14) /* Bit 14: Link Asynchronous Event */
-#define XM_IS_TX_ABORT (1<<13) /* Bit 13: Transmit Abort, late Col. etc */
-#define XM_IS_FRC_INT (1<<12) /* Bit 12: Force INT bit set in GP */
-#define XM_IS_INP_ASS (1<<11) /* Bit 11: Input Asserted, GP bit 0 set */
-#define XM_IS_LIPA_RC (1<<10) /* Bit 10: Link Partner requests config */
-#define XM_IS_RX_PAGE (1<<9) /* Bit 9: Page Received */
-#define XM_IS_TX_PAGE (1<<8) /* Bit 8: Next Page Loaded for Transmit */
-#define XM_IS_AND (1<<7) /* Bit 7: Auto-Negotiation Done */
-#define XM_IS_TSC_OV (1<<6) /* Bit 6: Time Stamp Counter Overflow */
-#define XM_IS_RXC_OV (1<<5) /* Bit 5: Rx Counter Event Overflow */
-#define XM_IS_TXC_OV (1<<4) /* Bit 4: Tx Counter Event Overflow */
-#define XM_IS_RXF_OV (1<<3) /* Bit 3: Receive FIFO Overflow */
-#define XM_IS_TXF_UR (1<<2) /* Bit 2: Transmit FIFO Underrun */
-#define XM_IS_TX_COMP (1<<1) /* Bit 1: Frame Tx Complete */
-#define XM_IS_RX_COMP (1<<0) /* Bit 0: Frame Rx Complete */
-
-#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
- XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))
-
-
-/* XM_HW_CFG 16 bit r/w Hardware Config Register */
- /* Bit 15.. 4: reserved */
-#define XM_HW_GEN_EOP (1<<3) /* Bit 3: generate End of Packet pulse */
-#define XM_HW_COM4SIG (1<<2) /* Bit 2: use Comma Detect for Sig. Det.*/
- /* Bit 1: reserved */
-#define XM_HW_GMII_MD (1<<0) /* Bit 0: GMII Interface selected */
-
-
-/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */
-/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */
- /* Bit 15..10 reserved */
-#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */
-
-/* XM_TX_THR 16 bit r/w Tx Request Threshold */
-/* XM_HT_THR 16 bit r/w Host Request Threshold */
-/* XM_RX_THR 16 bit r/w Rx Request Threshold */
- /* Bit 15..11 reserved */
-#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */
-
-
-/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */
-#define XM_ST_VALID (1UL<<31) /* Bit 31: Status Valid */
-#define XM_ST_BYTE_CNT (0x3fffL<<17) /* Bit 30..17: Tx frame Length */
-#define XM_ST_RETRY_CNT (0x1fL<<12) /* Bit 16..12: Retry Count */
-#define XM_ST_EX_COL (1L<<11) /* Bit 11: Excessive Collisions */
-#define XM_ST_EX_DEF (1L<<10) /* Bit 10: Excessive Deferral */
-#define XM_ST_BURST (1L<<9) /* Bit 9: p. xmitted in burst md*/
-#define XM_ST_DEFER (1L<<8) /* Bit 8: packet was defered */
-#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */
-#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */
-#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */
-#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */
-#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */
-#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */
-#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */
-#define XM_ST_SGN_COL (1L<<0) /* Bit 0: Single Collision */
-
-/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */
-/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */
- /* Bit 15..11: reserved */
-#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */
-
-
-/* XM_DEV_ID 32 bit r/o Device ID Register */
-#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */
-#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */
-
-
-/* XM_MODE 32 bit r/w Mode Register */
- /* Bit 31..27: reserved */
-#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */
-#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */
- /* extern generated */
-#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */
-#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */
- /* intern generated */
-#define XM_MD_LE_STW (1L<<22) /* Bit 22: Rx Stat Word in Little Endian */
-#define XM_MD_TX_CONT (1L<<21) /* Bit 21: Send Continuous */
-#define XM_MD_TX_PAUSE (1L<<20) /* Bit 20: (sc) Send Pause Frame */
-#define XM_MD_ATS (1L<<19) /* Bit 19: Append Time Stamp */
-#define XM_MD_SPOL_I (1L<<18) /* Bit 18: Send Pause on Low */
- /* intern generated */
-#define XM_MD_SPOH_I (1L<<17) /* Bit 17: Send Pause on High */
- /* intern generated */
-#define XM_MD_CAP (1L<<16) /* Bit 16: Check Address Pair */
-#define XM_MD_ENA_HASH (1L<<15) /* Bit 15: Enable Hashing */
-#define XM_MD_CSA (1L<<14) /* Bit 14: Check Station Address */
-#define XM_MD_CAA (1L<<13) /* Bit 13: Check Address Array */
-#define XM_MD_RX_MCTRL (1L<<12) /* Bit 12: Rx MAC Control Frame */
-#define XM_MD_RX_RUNT (1L<<11) /* Bit 11: Rx Runt Frames */
-#define XM_MD_RX_IRLE (1L<<10) /* Bit 10: Rx in Range Len Err Frame */
-#define XM_MD_RX_LONG (1L<<9) /* Bit 9: Rx Long Frame */
-#define XM_MD_RX_CRCE (1L<<8) /* Bit 8: Rx CRC Error Frame */
-#define XM_MD_RX_ERR (1L<<7) /* Bit 7: Rx Error Frame */
-#define XM_MD_DIS_UC (1L<<6) /* Bit 6: Disable Rx Unicast */
-#define XM_MD_DIS_MC (1L<<5) /* Bit 5: Disable Rx Multicast */
-#define XM_MD_DIS_BC (1L<<4) /* Bit 4: Disable Rx Broadcast */
-#define XM_MD_ENA_PROM (1L<<3) /* Bit 3: Enable Promiscuous */
-#define XM_MD_ENA_BE (1L<<2) /* Bit 2: Enable Big Endian */
-#define XM_MD_FTF (1L<<1) /* Bit 1: (sc) Flush Tx FIFO */
-#define XM_MD_FRF (1L<<0) /* Bit 0: (sc) Flush Rx FIFO */
-
-#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
-#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
- XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
-
-/* XM_STAT_CMD 16 bit r/w Statistics Command Register */
- /* Bit 16..6: reserved */
-#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */
-#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */
-#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */
-#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */
-#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */
-#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */
-
-
-/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */
-/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */
-#define XMR_MAX_SZ_OV (1UL<<31) /* Bit 31: 1024-MaxSize Rx Cnt Ov*/
-#define XMR_1023B_OV (1L<<30) /* Bit 30: 512-1023Byte Rx Cnt Ov*/
-#define XMR_511B_OV (1L<<29) /* Bit 29: 256-511 Byte Rx Cnt Ov*/
-#define XMR_255B_OV (1L<<28) /* Bit 28: 128-255 Byte Rx Cnt Ov*/
-#define XMR_127B_OV (1L<<27) /* Bit 27: 65-127 Byte Rx Cnt Ov */
-#define XMR_64B_OV (1L<<26) /* Bit 26: 64 Byte Rx Cnt Ov */
-#define XMR_UTIL_OV (1L<<25) /* Bit 25: Rx Util Cnt Overflow */
-#define XMR_UTIL_UR (1L<<24) /* Bit 24: Rx Util Cnt Underrun */
-#define XMR_CEX_ERR_OV (1L<<23) /* Bit 23: CEXT Err Cnt Ov */
- /* Bit 22: reserved */
-#define XMR_FCS_ERR_OV (1L<<21) /* Bit 21: Rx FCS Error Cnt Ov */
-#define XMR_LNG_ERR_OV (1L<<20) /* Bit 20: Rx too Long Err Cnt Ov*/
-#define XMR_RUNT_OV (1L<<19) /* Bit 19: Runt Event Cnt Ov */
-#define XMR_SHT_ERR_OV (1L<<18) /* Bit 18: Rx Short Ev Err Cnt Ov*/
-#define XMR_SYM_ERR_OV (1L<<17) /* Bit 17: Rx Sym Err Cnt Ov */
- /* Bit 16: reserved */
-#define XMR_CAR_ERR_OV (1L<<15) /* Bit 15: Rx Carr Ev Err Cnt Ov */
-#define XMR_JAB_PKT_OV (1L<<14) /* Bit 14: Rx Jabb Packet Cnt Ov */
-#define XMR_FIFO_OV (1L<<13) /* Bit 13: Rx FIFO Ov Ev Cnt Ov */
-#define XMR_FRA_ERR_OV (1L<<12) /* Bit 12: Rx Framing Err Cnt Ov */
-#define XMR_FMISS_OV (1L<<11) /* Bit 11: Rx Missed Ev Cnt Ov */
-#define XMR_BURST (1L<<10) /* Bit 10: Rx Burst Event Cnt Ov */
-#define XMR_INV_MOC (1L<<9) /* Bit 9: Rx with inv. MAC OC Ov*/
-#define XMR_INV_MP (1L<<8) /* Bit 8: Rx inv Pause Frame Ov */
-#define XMR_MCTRL_OV (1L<<7) /* Bit 7: Rx MAC Ctrl-F Cnt Ov */
-#define XMR_MPAUSE_OV (1L<<6) /* Bit 6: Rx Pause MAC Ctrl-F Ov*/
-#define XMR_UC_OK_OV (1L<<5) /* Bit 5: Rx Unicast Frame CntOv*/
-#define XMR_MC_OK_OV (1L<<4) /* Bit 4: Rx Multicast Cnt Ov */
-#define XMR_BC_OK_OV (1L<<3) /* Bit 3: Rx Broadcast Cnt Ov */
-#define XMR_OK_LO_OV (1L<<2) /* Bit 2: Octets Rx OK Low CntOv*/
-#define XMR_OK_HI_OV (1L<<1) /* Bit 1: Octets Rx OK Hi Cnt Ov*/
-#define XMR_OK_OV (1L<<0) /* Bit 0: Frames Received Ok Ov */
-
-#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV)
-
-/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */
-/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */
- /* Bit 31..26: reserved */
-#define XMT_MAX_SZ_OV (1L<<25) /* Bit 25: 1024-MaxSize Tx Cnt Ov*/
-#define XMT_1023B_OV (1L<<24) /* Bit 24: 512-1023Byte Tx Cnt Ov*/
-#define XMT_511B_OV (1L<<23) /* Bit 23: 256-511 Byte Tx Cnt Ov*/
-#define XMT_255B_OV (1L<<22) /* Bit 22: 128-255 Byte Tx Cnt Ov*/
-#define XMT_127B_OV (1L<<21) /* Bit 21: 65-127 Byte Tx Cnt Ov */
-#define XMT_64B_OV (1L<<20) /* Bit 20: 64 Byte Tx Cnt Ov */
-#define XMT_UTIL_OV (1L<<19) /* Bit 19: Tx Util Cnt Overflow */
-#define XMT_UTIL_UR (1L<<18) /* Bit 18: Tx Util Cnt Underrun */
-#define XMT_CS_ERR_OV (1L<<17) /* Bit 17: Tx Carr Sen Err Cnt Ov*/
-#define XMT_FIFO_UR_OV (1L<<16) /* Bit 16: Tx FIFO Ur Ev Cnt Ov */
-#define XMT_EX_DEF_OV (1L<<15) /* Bit 15: Tx Ex Deferall Cnt Ov */
-#define XMT_DEF (1L<<14) /* Bit 14: Tx Deferred Cnt Ov */
-#define XMT_LAT_COL_OV (1L<<13) /* Bit 13: Tx Late Col Cnt Ov */
-#define XMT_ABO_COL_OV (1L<<12) /* Bit 12: Tx abo dueto Ex Col Ov*/
-#define XMT_MUL_COL_OV (1L<<11) /* Bit 11: Tx Mult Col Cnt Ov */
-#define XMT_SNG_COL (1L<<10) /* Bit 10: Tx Single Col Cnt Ov */
-#define XMT_MCTRL_OV (1L<<9) /* Bit 9: Tx MAC Ctrl Counter Ov*/
-#define XMT_MPAUSE (1L<<8) /* Bit 8: Tx Pause MAC Ctrl-F Ov*/
-#define XMT_BURST (1L<<7) /* Bit 7: Tx Burst Event Cnt Ov */
-#define XMT_LONG (1L<<6) /* Bit 6: Tx Long Frame Cnt Ov */
-#define XMT_UC_OK_OV (1L<<5) /* Bit 5: Tx Unicast Cnt Ov */
-#define XMT_MC_OK_OV (1L<<4) /* Bit 4: Tx Multicast Cnt Ov */
-#define XMT_BC_OK_OV (1L<<3) /* Bit 3: Tx Broadcast Cnt Ov */
-#define XMT_OK_LO_OV (1L<<2) /* Bit 2: Octets Tx OK Low CntOv*/
-#define XMT_OK_HI_OV (1L<<1) /* Bit 1: Octets Tx OK Hi Cnt Ov*/
-#define XMT_OK_OV (1L<<0) /* Bit 0: Frames Tx Ok Ov */
-
-#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV)
-
-/*
- * Receive Frame Status Encoding
- */
-#define XMR_FS_LEN (0x3fffUL<<18) /* Bit 31..18: Rx Frame Length */
-#define XMR_FS_2L_VLAN (1L<<17) /* Bit 17: tagged wh 2Lev VLAN ID*/
-#define XMR_FS_1L_VLAN (1L<<16) /* Bit 16: tagged wh 1Lev VLAN ID*/
-#define XMR_FS_BC (1L<<15) /* Bit 15: Broadcast Frame */
-#define XMR_FS_MC (1L<<14) /* Bit 14: Multicast Frame */
-#define XMR_FS_UC (1L<<13) /* Bit 13: Unicast Frame */
- /* Bit 12: reserved */
-#define XMR_FS_BURST (1L<<11) /* Bit 11: Burst Mode */
-#define XMR_FS_CEX_ERR (1L<<10) /* Bit 10: Carrier Ext. Error */
-#define XMR_FS_802_3 (1L<<9) /* Bit 9: 802.3 Frame */
-#define XMR_FS_COL_ERR (1L<<8) /* Bit 8: Collision Error */
-#define XMR_FS_CAR_ERR (1L<<7) /* Bit 7: Carrier Event Error */
-#define XMR_FS_LEN_ERR (1L<<6) /* Bit 6: In-Range Length Error */
-#define XMR_FS_FRA_ERR (1L<<5) /* Bit 5: Framing Error */
-#define XMR_FS_RUNT (1L<<4) /* Bit 4: Runt Frame */
-#define XMR_FS_LNG_ERR (1L<<3) /* Bit 3: Giant (Jumbo) Frame */
-#define XMR_FS_FCS_ERR (1L<<2) /* Bit 2: Frame Check Sequ Err */
-#define XMR_FS_ERR (1L<<1) /* Bit 1: Frame Error */
-#define XMR_FS_MCTRL (1L<<0) /* Bit 0: MAC Control Packet */
-
-/*
- * XMR_FS_ERR will be set if
- * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
- * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
- * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
- * XMR_FS_ERR unless the corresponding bit in the Receive Command
- * Register is set.
- */
-#define XMR_FS_ANY_ERR XMR_FS_ERR
-
-/*----------------------------------------------------------------------------*/
-/*
- * XMAC-PHY Registers, indirect addressed over the XMAC
- */
-#define PHY_XMAC_CTRL 0x00 /* 16 bit r/w PHY Control Register */
-#define PHY_XMAC_STAT 0x01 /* 16 bit r/w PHY Status Register */
-#define PHY_XMAC_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
-#define PHY_XMAC_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
-#define PHY_XMAC_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
-#define PHY_XMAC_AUNE_LP 0x05 /* 16 bit r/o Link Partner Abi Reg */
-#define PHY_XMAC_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
-#define PHY_XMAC_NEPG 0x07 /* 16 bit r/w Next Page Register */
-#define PHY_XMAC_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */
- /* 0x09 - 0x0e: reserved */
-#define PHY_XMAC_EXT_STAT 0x0f /* 16 bit r/o Ext Status Register */
-#define PHY_XMAC_RES_ABI 0x10 /* 16 bit r/o PHY Resolved Ability */
-
-/*----------------------------------------------------------------------------*/
-/*
- * Broadcom-PHY Registers, indirect addressed over XMAC
- */
-#define PHY_BCOM_CTRL 0x00 /* 16 bit r/w PHY Control Register */
-#define PHY_BCOM_STAT 0x01 /* 16 bit r/o PHY Status Register */
-#define PHY_BCOM_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
-#define PHY_BCOM_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
-#define PHY_BCOM_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
-#define PHY_BCOM_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
-#define PHY_BCOM_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
-#define PHY_BCOM_NEPG 0x07 /* 16 bit r/w Next Page Register */
-#define PHY_BCOM_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */
- /* Broadcom-specific registers */
-#define PHY_BCOM_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */
-#define PHY_BCOM_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
- /* 0x0b - 0x0e: reserved */
-#define PHY_BCOM_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
-#define PHY_BCOM_P_EXT_CTRL 0x10 /* 16 bit r/w PHY Extended Ctrl Reg */
-#define PHY_BCOM_P_EXT_STAT 0x11 /* 16 bit r/o PHY Extended Stat Reg */
-#define PHY_BCOM_RE_CTR 0x12 /* 16 bit r/w Receive Error Counter */
-#define PHY_BCOM_FC_CTR 0x13 /* 16 bit r/w False Carrier Sense Cnt */
-#define PHY_BCOM_RNO_CTR 0x14 /* 16 bit r/w Receiver NOT_OK Cnt */
- /* 0x15 - 0x17: reserved */
-#define PHY_BCOM_AUX_CTRL 0x18 /* 16 bit r/w Auxiliary Control Reg */
-#define PHY_BCOM_AUX_STAT 0x19 /* 16 bit r/o Auxiliary Stat Summary */
-#define PHY_BCOM_INT_STAT 0x1a /* 16 bit r/o Interrupt Status Reg */
-#define PHY_BCOM_INT_MASK 0x1b /* 16 bit r/w Interrupt Mask Reg */
- /* 0x1c: reserved */
- /* 0x1d - 0x1f: test registers */
-
-/*----------------------------------------------------------------------------*/
-/*
- * Marvel-PHY Registers, indirect addressed over GMAC
- */
-#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */
-#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */
-#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
-#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
-#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
-#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
-#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
-#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */
-#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */
- /* Marvel-specific registers */
-#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */
-#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
- /* 0x0b - 0x0e: reserved */
-#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
-#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Ctrl Reg */
-#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Stat Reg */
-#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */
-#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */
-#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */
-#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */
-#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */
- /* 0x17: reserved */
-#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */
-#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */
-#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */
-#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */
-#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */
- /* 0x1d - 0x1f: reserved */
-
-/*----------------------------------------------------------------------------*/
-/*
- * Level One-PHY Registers, indirect addressed over XMAC
- */
-#define PHY_LONE_CTRL 0x00 /* 16 bit r/w PHY Control Register */
-#define PHY_LONE_STAT 0x01 /* 16 bit r/o PHY Status Register */
-#define PHY_LONE_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
-#define PHY_LONE_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
-#define PHY_LONE_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
-#define PHY_LONE_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
-#define PHY_LONE_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
-#define PHY_LONE_NEPG 0x07 /* 16 bit r/w Next Page Register */
-#define PHY_LONE_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */
- /* Level One-specific registers */
-#define PHY_LONE_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg*/
-#define PHY_LONE_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
- /* 0x0b -0x0e: reserved */
-#define PHY_LONE_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
-#define PHY_LONE_PORT_CFG 0x10 /* 16 bit r/w Port Configuration Reg*/
-#define PHY_LONE_Q_STAT 0x11 /* 16 bit r/o Quick Status Reg */
-#define PHY_LONE_INT_ENAB 0x12 /* 16 bit r/w Interrupt Enable Reg */
-#define PHY_LONE_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */
-#define PHY_LONE_LED_CFG 0x14 /* 16 bit r/w LED Configuration Reg */
-#define PHY_LONE_PORT_CTRL 0x15 /* 16 bit r/w Port Control Reg */
-#define PHY_LONE_CIM 0x16 /* 16 bit r/o CIM Reg */
- /* 0x17 -0x1c: reserved */
-
-/*----------------------------------------------------------------------------*/
-/*
- * National-PHY Registers, indirect addressed over XMAC
- */
-#define PHY_NAT_CTRL 0x00 /* 16 bit r/w PHY Control Register */
-#define PHY_NAT_STAT 0x01 /* 16 bit r/w PHY Status Register */
-#define PHY_NAT_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
-#define PHY_NAT_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
-#define PHY_NAT_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
-#define PHY_NAT_AUNE_LP 0x05 /* 16 bit r/o Link Partner Ability Reg */
-#define PHY_NAT_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
-#define PHY_NAT_NEPG 0x07 /* 16 bit r/w Next Page Register */
-#define PHY_NAT_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner Reg */
- /* National-specific registers */
-#define PHY_NAT_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */
-#define PHY_NAT_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
- /* 0x0b -0x0e: reserved */
-#define PHY_NAT_EXT_STAT 0x0f /* 16 bit r/o Extended Status Register */
-#define PHY_NAT_EXT_CTRL1 0x10 /* 16 bit r/o Extended Control Reg1 */
-#define PHY_NAT_Q_STAT1 0x11 /* 16 bit r/o Quick Status Reg1 */
-#define PHY_NAT_10B_OP 0x12 /* 16 bit r/o 10Base-T Operations Reg */
-#define PHY_NAT_EXT_CTRL2 0x13 /* 16 bit r/o Extended Control Reg1 */
-#define PHY_NAT_Q_STAT2 0x14 /* 16 bit r/o Quick Status Reg2 */
- /* 0x15 -0x18: reserved */
-#define PHY_NAT_PHY_ADDR 0x19 /* 16 bit r/o PHY Address Register */
-
-
-/*----------------------------------------------------------------------------*/
-
-/*
- * PHY bit definitions
- * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
- * XMAC/Broadcom/LevelOne/National/Marvell-specific.
- * All other are general.
- */
-
-/***** PHY_XMAC_CTRL 16 bit r/w PHY Control Register *****/
-/***** PHY_BCOM_CTRL 16 bit r/w PHY Control Register *****/
-/***** PHY_MARV_CTRL 16 bit r/w PHY Status Register *****/
-/***** PHY_LONE_CTRL 16 bit r/w PHY Control Register *****/
-#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */
-#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */
-#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
-#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */
-#define PHY_CT_PDOWN (1<<11) /* Bit 11: (BC,L1) Power Down Mode */
-#define PHY_CT_ISOL (1<<10) /* Bit 10: (BC,L1) Isolate Mode */
-#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */
-#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */
-#define PHY_CT_COL_TST (1<<7) /* Bit 7: (BC,L1) Collision Test enabled */
-#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: (BC,L1) Speed select, upper bit */
- /* Bit 5..0: reserved */
-
-#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */
-#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */
-#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */
-
-
-/***** PHY_XMAC_STAT 16 bit r/w PHY Status Register *****/
-/***** PHY_BCOM_STAT 16 bit r/w PHY Status Register *****/
-/***** PHY_MARV_STAT 16 bit r/w PHY Status Register *****/
-/***** PHY_LONE_STAT 16 bit r/w PHY Status Register *****/
- /* Bit 15..9: reserved */
- /* (BC/L1) 100/10 Mbps cap bits ignored*/
-#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */
- /* Bit 7: reserved */
-#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: (BC/L1) preamble suppression */
-#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */
-#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */
-#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */
-#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */
-#define PHY_ST_JAB_DET (1<<1) /* Bit 1: (BC/L1) Jabber Detected */
-#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */
-
-
-/***** PHY_XMAC_ID1 16 bit r/o PHY ID1 Register */
-/***** PHY_BCOM_ID1 16 bit r/o PHY ID1 Register */
-/***** PHY_MARV_ID1 16 bit r/o PHY ID1 Register */
-/***** PHY_LONE_ID1 16 bit r/o PHY ID1 Register */
-#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */
-#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */
-#define PHY_I1_REV_MSK 0x0f /* Bit 3.. 0: Revision Number */
-
-/* different Broadcom PHY Ids */
-#define PHY_BCOM_ID1_A1 0x6041
-#define PHY_BCOM_ID1_B2 0x6043
-#define PHY_BCOM_ID1_C0 0x6044
-#define PHY_BCOM_ID1_C5 0x6047
-
-
-/***** PHY_XMAC_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
-/***** PHY_XMAC_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
-#define PHY_AN_NXT_PG (1<<15) /* Bit 15: Request Next Page */
-#define PHY_X_AN_ACK (1<<14) /* Bit 14: (ro) Acknowledge Received */
-#define PHY_X_AN_RFB (3<<12) /* Bit 13..12: Remote Fault Bits */
- /* Bit 11.. 9: reserved */
-#define PHY_X_AN_PAUSE (3<<7) /* Bit 8.. 7: Pause Bits */
-#define PHY_X_AN_HD (1<<6) /* Bit 6: Half Duplex */
-#define PHY_X_AN_FD (1<<5) /* Bit 5: Full Duplex */
- /* Bit 4.. 0: reserved */
-
-/***** PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
-/***** PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
-/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
- /* Bit 14: reserved */
-#define PHY_B_AN_RF (1<<13) /* Bit 13: Remote Fault */
- /* Bit 12: reserved */
-#define PHY_B_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */
-#define PHY_B_AN_PC (1<<10) /* Bit 10: Pause Capable */
- /* Bit 9..5: 100/10 BT cap bits ingnored */
-#define PHY_B_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/
-
-/***** PHY_LONE_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
-/***** PHY_LONE_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
-/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
- /* Bit 14: reserved */
-#define PHY_L_AN_RF (1<<13) /* Bit 13: Remote Fault */
- /* Bit 12: reserved */
-#define PHY_L_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */
-#define PHY_L_AN_PC (1<<10) /* Bit 10: Pause Capable */
- /* Bit 9..5: 100/10 BT cap bits ingnored */
-#define PHY_L_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/
-
-/***** PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
-/***** PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
-/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */
- /* Bit 14: reserved */
-#define PHY_N_AN_RF (1<<13) /* Bit 13: Remote Fault */
- /* Bit 12: reserved */
-#define PHY_N_AN_100F (1<<11) /* Bit 11: 100Base-T2 FD Support */
-#define PHY_N_AN_100H (1<<10) /* Bit 10: 100Base-T2 HD Support */
- /* Bit 9..5: 100/10 BT cap bits ingnored */
-#define PHY_N_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/
-
-/* field type definition for PHY_x_AN_SEL */
-#define PHY_SEL_TYPE 0x01 /* 00001 = Ethernet */
-
-/***** PHY_XMAC_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
- /* Bit 15..4: reserved */
-#define PHY_ANE_LP_NP (1<<3) /* Bit 3: Link Partner can Next Page */
-#define PHY_ANE_LOC_NP (1<<2) /* Bit 2: Local PHY can Next Page */
-#define PHY_ANE_RX_PG (1<<1) /* Bit 1: Page Received */
- /* Bit 0: reserved */
-
-/***** PHY_BCOM_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
-/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
-/***** PHY_MARV_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/
- /* Bit 15..5: reserved */
-#define PHY_ANE_PAR_DF (1<<4) /* Bit 4: Parallel Detection Fault */
-/* PHY_ANE_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */
-/* PHY_ANE_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */
-/* PHY_ANE_RX_PG (see XMAC) Bit 1: Page Received */
-#define PHY_ANE_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */
-
-/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/
-/***** PHY_BCOM_NEPG 16 bit r/w Next Page Register *****/
-/***** PHY_LONE_NEPG 16 bit r/w Next Page Register *****/
-/***** PHY_XMAC_NEPG_LP 16 bit r/o Next Page Link Partner *****/
-/***** PHY_BCOM_NEPG_LP 16 bit r/o Next Page Link Partner *****/
-/***** PHY_LONE_NEPG_LP 16 bit r/o Next Page Link Partner *****/
-#define PHY_NP_MORE (1<<15) /* Bit 15: More, Next Pages to follow */
-#define PHY_NP_ACK1 (1<<14) /* Bit 14: (ro) Ack1, for receiving a message */
-#define PHY_NP_MSG_VAL (1<<13) /* Bit 13: Message Page valid */
-#define PHY_NP_ACK2 (1<<12) /* Bit 12: Ack2, comply with msg content */
-#define PHY_NP_TOG (1<<11) /* Bit 11: Toggle Bit, ensure sync */
-#define PHY_NP_MSG 0x07ff /* Bit 10..0: Message from/to Link Partner */
-
-/*
- * XMAC-Specific
- */
-/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/
-#define PHY_X_EX_FD (1<<15) /* Bit 15: Device Supports Full Duplex */
-#define PHY_X_EX_HD (1<<14) /* Bit 14: Device Supports Half Duplex */
- /* Bit 13..0: reserved */
-
-/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/
- /* Bit 15..9: reserved */
-#define PHY_X_RS_PAUSE (3<<7) /* Bit 8..7: selected Pause Mode */
-#define PHY_X_RS_HD (1<<6) /* Bit 6: Half Duplex Mode selected */
-#define PHY_X_RS_FD (1<<5) /* Bit 5: Full Duplex Mode selected */
-#define PHY_X_RS_ABLMIS (1<<4) /* Bit 4: duplex or pause cap mismatch */
-#define PHY_X_RS_PAUMIS (1<<3) /* Bit 3: pause capability mismatch */
- /* Bit 2..0: reserved */
-/*
- * Remote Fault Bits (PHY_X_AN_RFB) encoding
- */
-#define X_RFB_OK (0<<12) /* Bit 13..12 No errors, Link OK */
-#define X_RFB_LF (1<<12) /* Bit 13..12 Link Failure */
-#define X_RFB_OFF (2<<12) /* Bit 13..12 Offline */
-#define X_RFB_AN_ERR (3<<12) /* Bit 13..12 Auto-Negotiation Error */
-
-/*
- * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding
- */
-#define PHY_X_P_NO_PAUSE (0<<7) /* Bit 8..7: no Pause Mode */
-#define PHY_X_P_SYM_MD (1<<7) /* Bit 8..7: symmetric Pause Mode */
-#define PHY_X_P_ASYM_MD (2<<7) /* Bit 8..7: asymmetric Pause Mode */
-#define PHY_X_P_BOTH_MD (3<<7) /* Bit 8..7: both Pause Mode */
-
-
-/*
- * Broadcom-Specific
- */
-/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
-#define PHY_B_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
-#define PHY_B_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */
-#define PHY_B_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */
-#define PHY_B_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */
-#define PHY_B_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
-#define PHY_B_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
- /* Bit 7..0: reserved */
-
-/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
-/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
-#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
-#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
-#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
-#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */
-#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
-#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
- /* Bit 9..8: reserved */
-#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
-
-/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/
-#define PHY_B_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */
-#define PHY_B_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */
-#define PHY_B_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */
-#define PHY_B_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */
- /* Bit 11..0: reserved */
-
-/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/
-#define PHY_B_PEC_MAC_PHY (1<<15) /* Bit 15: 10BIT/GMI-Interface */
-#define PHY_B_PEC_DIS_CROSS (1<<14) /* Bit 14: Disable MDI Crossover */
-#define PHY_B_PEC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */
-#define PHY_B_PEC_INT_DIS (1<<12) /* Bit 12: Interrupts Disabled */
-#define PHY_B_PEC_F_INT (1<<11) /* Bit 11: Force Interrupt */
-#define PHY_B_PEC_BY_45 (1<<10) /* Bit 10: Bypass 4B5B-Decoder */
-#define PHY_B_PEC_BY_SCR (1<<9) /* Bit 9: Bypass Scrambler */
-#define PHY_B_PEC_BY_MLT3 (1<<8) /* Bit 8: Bypass MLT3 Encoder */
-#define PHY_B_PEC_BY_RXA (1<<7) /* Bit 7: Bypass Rx Alignm. */
-#define PHY_B_PEC_RES_SCR (1<<6) /* Bit 6: Reset Scrambler */
-#define PHY_B_PEC_EN_LTR (1<<5) /* Bit 5: Ena LED Traffic Mode */
-#define PHY_B_PEC_LED_ON (1<<4) /* Bit 4: Force LED's on */
-#define PHY_B_PEC_LED_OFF (1<<3) /* Bit 3: Force LED's off */
-#define PHY_B_PEC_EX_IPG (1<<2) /* Bit 2: Extend Tx IPG Mode */
-#define PHY_B_PEC_3_LED (1<<1) /* Bit 1: Three Link LED mode */
-#define PHY_B_PEC_HIGH_LA (1<<0) /* Bit 0: GMII FIFO Elasticy */
-
-/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/
- /* Bit 15..14: reserved */
-#define PHY_B_PES_CROSS_STAT (1<<13) /* Bit 13: MDI Crossover Status */
-#define PHY_B_PES_INT_STAT (1<<12) /* Bit 12: Interrupt Status */
-#define PHY_B_PES_RRS (1<<11) /* Bit 11: Remote Receiver Stat. */
-#define PHY_B_PES_LRS (1<<10) /* Bit 10: Local Receiver Stat. */
-#define PHY_B_PES_LOCKED (1<<9) /* Bit 9: Locked */
-#define PHY_B_PES_LS (1<<8) /* Bit 8: Link Status */
-#define PHY_B_PES_RF (1<<7) /* Bit 7: Remote Fault */
-#define PHY_B_PES_CE_ER (1<<6) /* Bit 6: Carrier Ext Error */
-#define PHY_B_PES_BAD_SSD (1<<5) /* Bit 5: Bad SSD */
-#define PHY_B_PES_BAD_ESD (1<<4) /* Bit 4: Bad ESD */
-#define PHY_B_PES_RX_ER (1<<3) /* Bit 3: Receive Error */
-#define PHY_B_PES_TX_ER (1<<2) /* Bit 2: Transmit Error */
-#define PHY_B_PES_LOCK_ER (1<<1) /* Bit 1: Lock Error */
-#define PHY_B_PES_MLT3_ER (1<<0) /* Bit 0: MLT3 code Error */
-
-/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/
- /* Bit 15..8: reserved */
-#define PHY_B_FC_CTR 0xff /* Bit 7..0: False Carrier Counter */
-
-/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/
-#define PHY_B_RC_LOC_MSK 0xff00 /* Bit 15..8: Local Rx NOT_OK cnt */
-#define PHY_B_RC_REM_MSK 0x00ff /* Bit 7..0: Remote Rx NOT_OK cnt */
-
-/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/
-#define PHY_B_AC_L_SQE (1<<15) /* Bit 15: Low Squelch */
-#define PHY_B_AC_LONG_PACK (1<<14) /* Bit 14: Rx Long Packets */
-#define PHY_B_AC_ER_CTRL (3<<12) /* Bit 13..12: Edgerate Control */
- /* Bit 11: reserved */
-#define PHY_B_AC_TX_TST (1<<10) /* Bit 10: Tx test bit, always 1 */
- /* Bit 9.. 8: reserved */
-#define PHY_B_AC_DIS_PRF (1<<7) /* Bit 7: dis part resp filter */
- /* Bit 6: reserved */
-#define PHY_B_AC_DIS_PM (1<<5) /* Bit 5: dis power management */
- /* Bit 4: reserved */
-#define PHY_B_AC_DIAG (1<<3) /* Bit 3: Diagnostic Mode */
- /* Bit 2.. 0: reserved */
-
-/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/
-#define PHY_B_AS_AN_C (1<<15) /* Bit 15: AutoNeg complete */
-#define PHY_B_AS_AN_CA (1<<14) /* Bit 14: AN Complete Ack */
-#define PHY_B_AS_ANACK_D (1<<13) /* Bit 13: AN Ack Detect */
-#define PHY_B_AS_ANAB_D (1<<12) /* Bit 12: AN Ability Detect */
-#define PHY_B_AS_NPW (1<<11) /* Bit 11: AN Next Page Wait */
-#define PHY_B_AS_AN_RES_MSK (7<<8) /* Bit 10..8: AN HDC */
-#define PHY_B_AS_PDF (1<<7) /* Bit 7: Parallel Detect. Fault */
-#define PHY_B_AS_RF (1<<6) /* Bit 6: Remote Fault */
-#define PHY_B_AS_ANP_R (1<<5) /* Bit 5: AN Page Received */
-#define PHY_B_AS_LP_ANAB (1<<4) /* Bit 4: LP AN Ability */
-#define PHY_B_AS_LP_NPAB (1<<3) /* Bit 3: LP Next Page Ability */
-#define PHY_B_AS_LS (1<<2) /* Bit 2: Link Status */
-#define PHY_B_AS_PRR (1<<1) /* Bit 1: Pause Resolution-Rx */
-#define PHY_B_AS_PRT (1<<0) /* Bit 0: Pause Resolution-Tx */
-
-#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT)
-
-/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/
-/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
- /* Bit 15: reserved */
-#define PHY_B_IS_PSE (1<<14) /* Bit 14: Pair Swap Error */
-#define PHY_B_IS_MDXI_SC (1<<13) /* Bit 13: MDIX Status Change */
-#define PHY_B_IS_HCT (1<<12) /* Bit 12: counter above 32k */
-#define PHY_B_IS_LCT (1<<11) /* Bit 11: counter above 128 */
-#define PHY_B_IS_AN_PR (1<<10) /* Bit 10: Page Received */
-#define PHY_B_IS_NO_HDCL (1<<9) /* Bit 9: No HCD Link */
-#define PHY_B_IS_NO_HDC (1<<8) /* Bit 8: No HCD */
-#define PHY_B_IS_NEG_USHDC (1<<7) /* Bit 7: Negotiated Unsup. HCD */
-#define PHY_B_IS_SCR_S_ER (1<<6) /* Bit 6: Scrambler Sync Error */
-#define PHY_B_IS_RRS_CHANGE (1<<5) /* Bit 5: Remote Rx Stat Change */
-#define PHY_B_IS_LRS_CHANGE (1<<4) /* Bit 4: Local Rx Stat Change */
-#define PHY_B_IS_DUP_CHANGE (1<<3) /* Bit 3: Duplex Mode Change */
-#define PHY_B_IS_LSP_CHANGE (1<<2) /* Bit 2: Link Speed Change */
-#define PHY_B_IS_LST_CHANGE (1<<1) /* Bit 1: Link Status Changed */
-#define PHY_B_IS_CRC_ER (1<<0) /* Bit 0: CRC Error */
-
-#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
-
-/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
-#define PHY_B_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */
-#define PHY_B_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */
-#define PHY_B_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */
-#define PHY_B_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */
-
-/*
- * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
- */
-#define PHY_B_RES_1000FD (7<<8) /* Bit 10..8: 1000Base-T Full Dup. */
-#define PHY_B_RES_1000HD (6<<8) /* Bit 10..8: 1000Base-T Half Dup. */
-/* others: 100/10: invalid for us */
-
-/*
- * Level One-Specific
- */
-/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
-#define PHY_L_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
-#define PHY_L_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */
-#define PHY_L_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */
-#define PHY_L_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */
-#define PHY_L_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
-#define PHY_L_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
- /* Bit 7..0: reserved */
-
-/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
-#define PHY_L_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
-#define PHY_L_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
-#define PHY_L_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
-#define PHY_L_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */
-#define PHY_L_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
-#define PHY_L_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
- /* Bit 9..8: reserved */
-#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
-
-/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/
-#define PHY_L_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */
-#define PHY_L_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */
-#define PHY_L_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */
-#define PHY_L_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */
- /* Bit 11..0: reserved */
-
-/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/
-#define PHY_L_PC_REP_MODE (1<<15) /* Bit 15: Repeater Mode */
- /* Bit 14: reserved */
-#define PHY_L_PC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */
-#define PHY_L_PC_BY_SCR (1<<12) /* Bit 12: Bypass Scrambler */
-#define PHY_L_PC_BY_45 (1<<11) /* Bit 11: Bypass 4B5B-Decoder */
-#define PHY_L_PC_JAB_DIS (1<<10) /* Bit 10: Jabber Disabled */
-#define PHY_L_PC_SQE (1<<9) /* Bit 9: Enable Heartbeat */
-#define PHY_L_PC_TP_LOOP (1<<8) /* Bit 8: TP Loopback */
-#define PHY_L_PC_SSS (1<<7) /* Bit 7: Smart Speed Selection */
-#define PHY_L_PC_FIFO_SIZE (1<<6) /* Bit 6: FIFO Size */
-#define PHY_L_PC_PRE_EN (1<<5) /* Bit 5: Preamble Enable */
-#define PHY_L_PC_CIM (1<<4) /* Bit 4: Carrier Integrity Mon */
-#define PHY_L_PC_10_SER (1<<3) /* Bit 3: Use Serial Output */
-#define PHY_L_PC_ANISOL (1<<2) /* Bit 2: Unisolate Port */
-#define PHY_L_PC_TEN_BIT (1<<1) /* Bit 1: 10bit iface mode on */
-#define PHY_L_PC_ALTCLOCK (1<<0) /* Bit 0: (ro) ALTCLOCK Mode on */
-
-/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/
-#define PHY_L_QS_D_RATE (3<<14) /* Bit 15..14: Data Rate */
-#define PHY_L_QS_TX_STAT (1<<13) /* Bit 13: Transmitting */
-#define PHY_L_QS_RX_STAT (1<<12) /* Bit 12: Receiving */
-#define PHY_L_QS_COL_STAT (1<<11) /* Bit 11: Collision */
-#define PHY_L_QS_L_STAT (1<<10) /* Bit 10: Link is up */
-#define PHY_L_QS_DUP_MOD (1<<9) /* Bit 9: Full/Half Duplex */
-#define PHY_L_QS_AN (1<<8) /* Bit 8: AutoNeg is On */
-#define PHY_L_QS_AN_C (1<<7) /* Bit 7: AN is Complete */
-#define PHY_L_QS_LLE (7<<4) /* Bit 6: Line Length Estim. */
-#define PHY_L_QS_PAUSE (1<<3) /* Bit 3: LP advertised Pause */
-#define PHY_L_QS_AS_PAUSE (1<<2) /* Bit 2: LP adv. asym. Pause */
-#define PHY_L_QS_ISOLATE (1<<1) /* Bit 1: CIM Isolated */
-#define PHY_L_QS_EVENT (1<<0) /* Bit 0: Event has occurred */
-
-/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/
-/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/
- /* Bit 15..14: reserved */
-#define PHY_L_IS_AN_F (1<<13) /* Bit 13: Auto-Negotiation fault */
- /* Bit 12: not described */
-#define PHY_L_IS_CROSS (1<<11) /* Bit 11: Crossover used */
-#define PHY_L_IS_POL (1<<10) /* Bit 10: Polarity correct. used */
-#define PHY_L_IS_SS (1<<9) /* Bit 9: Smart Speed Downgrade */
-#define PHY_L_IS_CFULL (1<<8) /* Bit 8: Counter Full */
-#define PHY_L_IS_AN_C (1<<7) /* Bit 7: AutoNeg Complete */
-#define PHY_L_IS_SPEED (1<<6) /* Bit 6: Speed Changed */
-#define PHY_L_IS_DUP (1<<5) /* Bit 5: Duplex Changed */
-#define PHY_L_IS_LS (1<<4) /* Bit 4: Link Status Changed */
-#define PHY_L_IS_ISOL (1<<3) /* Bit 3: Isolate Occured */
-#define PHY_L_IS_MDINT (1<<2) /* Bit 2: (ro) STAT: MII Int Pending */
-#define PHY_L_IS_INTEN (1<<1) /* Bit 1: ENAB: Enable IRQs */
-#define PHY_L_IS_FORCE (1<<0) /* Bit 0: ENAB: Force Interrupt */
-
-/* int. mask */
-#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
-
-/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/
-#define PHY_L_LC_LEDC (3<<14) /* Bit 15..14: Col/Blink/On/Off */
-#define PHY_L_LC_LEDR (3<<12) /* Bit 13..12: Rx/Blink/On/Off */
-#define PHY_L_LC_LEDT (3<<10) /* Bit 11..10: Tx/Blink/On/Off */
-#define PHY_L_LC_LEDG (3<<8) /* Bit 9..8: Giga/Blink/On/Off */
-#define PHY_L_LC_LEDS (3<<6) /* Bit 7..6: 10-100/Blink/On/Off */
-#define PHY_L_LC_LEDL (3<<4) /* Bit 5..4: Link/Blink/On/Off */
-#define PHY_L_LC_LEDF (3<<2) /* Bit 3..2: Duplex/Blink/On/Off */
-#define PHY_L_LC_PSTRECH (1<<1) /* Bit 1: Strech LED Pulses */
-#define PHY_L_LC_FREQ (1<<0) /* Bit 0: 30/100 ms */
-
-/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/
-#define PHY_L_PC_TX_TCLK (1<<15) /* Bit 15: Enable TX_TCLK */
- /* Bit 14: reserved */
-#define PHY_L_PC_ALT_NP (1<<13) /* Bit 14: Alternate Next Page */
-#define PHY_L_PC_GMII_ALT (1<<12) /* Bit 13: Alternate GMII driver */
- /* Bit 11: reserved */
-#define PHY_L_PC_TEN_CRS (1<<10) /* Bit 10: Extend CRS*/
- /* Bit 9..0: not described */
-
-/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/
-#define PHY_L_CIM_ISOL (255<<8)/* Bit 15..8: Isolate Count */
-#define PHY_L_CIM_FALSE_CAR (255<<0)/* Bit 7..0: False Carrier Count */
-
-
-/*
- * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
- */
-#define PHY_L_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */
-#define PHY_L_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */
-#define PHY_L_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */
-#define PHY_L_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */
-
-
-/*
- * National-Specific
- */
-/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
-#define PHY_N_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
-#define PHY_N_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */
-#define PHY_N_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */
-#define PHY_N_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */
-#define PHY_N_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
-#define PHY_N_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
-#define PHY_N_1000C_APC (1<<7) /* Bit 7: Asymmetric Pause Cap. */
- /* Bit 6..0: reserved */
-
-/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
-#define PHY_N_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
-#define PHY_N_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
-#define PHY_N_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
-#define PHY_N_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/
-#define PHY_N_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
-#define PHY_N_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
-#define PHY_N_1000C_LP_APC (1<<9) /* Bit 9: LP Asym. Pause Cap. */
- /* Bit 8: reserved */
-#define PHY_N_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
-
-/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/
-#define PHY_N_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */
-#define PHY_N_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */
-#define PHY_N_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */
-#define PHY_N_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */
- /* Bit 11..0: reserved */
-
-/* todo: those are still missing */
-/***** PHY_NAT_EXT_CTRL1 16 bit r/o Extended Control Reg1 *****/
-/***** PHY_NAT_Q_STAT1 16 bit r/o Quick Status Reg1 *****/
-/***** PHY_NAT_10B_OP 16 bit r/o 10Base-T Operations Reg *****/
-/***** PHY_NAT_EXT_CTRL2 16 bit r/o Extended Control Reg1 *****/
-/***** PHY_NAT_Q_STAT2 16 bit r/o Quick Status Reg2 *****/
-/***** PHY_NAT_PHY_ADDR 16 bit r/o PHY Address Register *****/
-
-/*
- * Marvell-Specific
- */
-/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
-/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/
-#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */
-#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */
-#define PHY_M_AN_RF BIT_13 /* Remote Fault */
- /* Bit 12: reserved */
-#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */
-#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */
-#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */
-#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */
-#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */
-#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */
-
-/* special defines for FIBER (88E1011S only) */
-#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */
-#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */
-#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */
-#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */
-
-/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
-#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */
-#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */
-#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */
-#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */
-
-/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
-#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
-#define PHY_M_1000C_MSE (1<<12) /* Bit 12: Manual Master/Slave Enable */
-#define PHY_M_1000C_MSC (1<<11) /* Bit 11: M/S Configuration (1=Master) */
-#define PHY_M_1000C_MPD (1<<10) /* Bit 10: Multi-Port Device */
-#define PHY_M_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */
-#define PHY_M_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */
- /* Bit 7..0: reserved */
-
-/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/
-#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */
-#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */
-#define PHY_M_PC_ASS_CRS_TX (1<<11) /* Bit 11: Assert CRS on Transmit */
-#define PHY_M_PC_FL_GOOD (1<<10) /* Bit 10: Force Link Good */
-#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */
-#define PHY_M_PC_ENA_EXT_D (1<<7) /* Bit 7: Enable Ext. Distance (10BT) */
-#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */
-#define PHY_M_PC_DIS_125CLK (1<<4) /* Bit 4: Disable 125 CLK */
-#define PHY_M_PC_MAC_POW_UP (1<<3) /* Bit 3: MAC Power up */
-#define PHY_M_PC_SQE_T_ENA (1<<2) /* Bit 2: SQE Test Enabled */
-#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */
-#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */
-
-#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */
-#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */
-
-#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x)
-#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
-#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
-#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
-
-/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/
-#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */
-#define PHY_M_PS_SPEED_1000 (1<<15) /* 10 = 1000 Mbps */
-#define PHY_M_PS_SPEED_100 (1<<14) /* 01 = 100 Mbps */
-#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */
-#define PHY_M_PS_FULL_DUP (1<<13) /* Bit 13: Full Duplex */
-#define PHY_M_PS_PAGE_REC (1<<12) /* Bit 12: Page Received */
-#define PHY_M_PS_SPDUP_RES (1<<11) /* Bit 11: Speed & Duplex Resolved */
-#define PHY_M_PS_LINK_UP (1<<10) /* Bit 10: Link Up */
-#define PHY_M_PS_CABLE_MSK (3<<7) /* Bit 9.. 7: Cable Length Mask */
-#define PHY_M_PS_MDI_X_STAT (1<<6) /* Bit 6: MDI Crossover Stat (1=MDIX) */
-#define PHY_M_PS_DOWNS_STAT (1<<5) /* Bit 5: Downshift Status (1=downsh.) */
-#define PHY_M_PS_ENDET_STAT (1<<4) /* Bit 4: Energy Detect Status (1=act) */
-#define PHY_M_PS_TX_P_EN (1<<3) /* Bit 3: Tx Pause Enabled */
-#define PHY_M_PS_RX_P_EN (1<<2) /* Bit 2: Rx Pause Enabled */
-#define PHY_M_PS_POL_REV (1<<1) /* Bit 1: Polarity Reversed */
-#define PHY_M_PC_JABBER (1<<0) /* Bit 0: Jabber */
-
-#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
-
-/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
-/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/
-#define PHY_M_IS_AN_ERROR (1<<15) /* Bit 15: Auto-Negotiation Error */
-#define PHY_M_IS_LSP_CHANGE (1<<14) /* Bit 14: Link Speed Changed */
-#define PHY_M_IS_DUP_CHANGE (1<<13) /* Bit 13: Duplex Mode Changed */
-#define PHY_M_IS_AN_PR (1<<12) /* Bit 12: Page Received */
-#define PHY_M_IS_AN_COMPL (1<<11) /* Bit 11: Auto-Negotiation Completed */
-#define PHY_M_IS_LST_CHANGE (1<<10) /* Bit 10: Link Status Changed */
-#define PHY_M_IS_SYMB_ERROR (1<<9) /* Bit 9: Symbol Error */
-#define PHY_M_IS_FALSE_CARR (1<<8) /* Bit 8: False Carrier */
-#define PHY_M_IS_FIFO_ERROR (1<<7) /* Bit 7: FIFO Overflow/Underrun Error */
-#define PHY_M_IS_MDI_CHANGE (1<<6) /* Bit 6: MDI Crossover Changed */
-#define PHY_M_IS_DOWNSH_DET (1<<5) /* Bit 5: Downshift Detected */
-#define PHY_M_IS_END_CHANGE (1<<4) /* Bit 4: Energy Detect Changed */
- /* Bit 3..2: reserved */
-#define PHY_M_IS_POL_CHANGE (1<<1) /* Bit 1: Polarity Changed */
-#define PHY_M_IS_JABBER (1<<0) /* Bit 0: Jabber */
-
-#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
- PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
-
-/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
-#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master downshift counter */
-#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave downshift counter */
-#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */
-#define PHY_M_EC_FIB_AN_ENA (1<<3) /* Bit 3: Fiber Auto-Neg. Enable */
-
-#define PHY_M_EC_M_DSC(x) SHIFT10(x) /* 00=1x; 01=2x; 10=3x; 11=4x */
-#define PHY_M_EC_S_DSC(x) SHIFT8(x) /* 00=dis; 01=1x; 10=2x; 11=3x */
-#define PHY_M_EC_MAC_S(x) SHIFT4(x) /* 01X=0; 110=2.5; 111=25 (MHz) */
-
-#define MAC_TX_CLK_0_MHZ 2
-#define MAC_TX_CLK_2_5_MHZ 6
-#define MAC_TX_CLK_25_MHZ 7
-
-/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/
-#define PHY_M_LEDC_DIS_LED (1<<15) /* Bit 15: Disable LED */
-#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */
-#define PHY_M_LEDC_F_INT (1<<11) /* Bit 11: Force Interrupt */
-#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */
- /* Bit 7.. 5: reserved */
-#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */
-#define PHY_M_LEDC_DP_CTRL (1<<2) /* Bit 2: Duplex Control */
-#define PHY_M_LEDC_RX_CTRL (1<<1) /* Bit 1: Rx activity / Link */
-#define PHY_M_LEDC_TX_CTRL (1<<0) /* Bit 0: Tx activity / Link */
-
-#define PHY_M_LED_PULS_DUR(x) SHIFT12(x) /* Pulse Stretch Duration */
-
-#define PULS_NO_STR 0 /* no pulse stretching */
-#define PULS_21MS 1 /* 21 ms to 42 ms */
-#define PULS_42MS 2 /* 42 ms to 84 ms */
-#define PULS_84MS 3 /* 84 ms to 170 ms */
-#define PULS_170MS 4 /* 170 ms to 340 ms */
-#define PULS_340MS 5 /* 340 ms to 670 ms */
-#define PULS_670MS 6 /* 670 ms to 1.3 s */
-#define PULS_1300MS 7 /* 1.3 s to 2.7 s */
-
-#define PHY_M_LED_BLINK_RT(x) SHIFT8(x) /* Blink Rate */
-
-#define BLINK_42MS 0 /* 42 ms */
-#define BLINK_84MS 1 /* 84 ms */
-#define BLINK_170MS 2 /* 170 ms */
-#define BLINK_340MS 3 /* 340 ms */
-#define BLINK_670MS 4 /* 670 ms */
- /* values 5 - 7: reserved */
-
-/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
-#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */
-#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */
-#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */
-#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */
-#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */
-#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */
-
-#define MO_LED_NORM 0
-#define MO_LED_BLINK 1
-#define MO_LED_OFF 2
-#define MO_LED_ON 3
-
-/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
- /* Bit 15.. 7: reserved */
-#define PHY_M_EC2_FI_IMPED (1<<6) /* Bit 6: Fiber Input Impedance */
-#define PHY_M_EC2_FO_IMPED (1<<5) /* Bit 5: Fiber Output Impedance */
-#define PHY_M_EC2_FO_M_CLK (1<<4) /* Bit 4: Fiber Mode Clock Enable */
-#define PHY_M_EC2_FO_BOOST (1<<3) /* Bit 3: Fiber Output Boost */
-#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */
-
-/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/
-#define PHY_M_FC_AUTO_SEL (1<<15) /* Bit 15: Fiber/Copper Auto Sel. dis. */
-#define PHY_M_FC_AN_REG_ACC (1<<14) /* Bit 14: Fiber/Copper Autoneg. reg acc */
-#define PHY_M_FC_RESULUTION (1<<13) /* Bit 13: Fiber/Copper Resulution */
-#define PHY_M_SER_IF_AN_BP (1<<12) /* Bit 12: Ser IF autoneg. bypass enable */
-#define PHY_M_SER_IF_BP_ST (1<<11) /* Bit 11: Ser IF autoneg. bypass status */
-#define PHY_M_IRQ_POLARITY (1<<10) /* Bit 10: IRQ polarity */
- /* Bit 9..4: reserved */
-#define PHY_M_UNDOC1 (1<< 7) /* undocumented bit !! */
-#define PHY_M_MODE_MASK (0xf<<0)/* Bit 3..0: copy of HWCFG MODE[3:0] */
-
-
-/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/
-#define PHY_M_CABD_ENA_TEST (1<<15) /* Bit 15: Enable Test */
-#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status */
- /* Bit 12.. 8: reserved */
-#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance */
-
-/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
-#define CABD_STAT_NORMAL 0
-#define CABD_STAT_SHORT 1
-#define CABD_STAT_OPEN 2
-#define CABD_STAT_FAIL 3
-
-
-/*
- * GMAC registers
- *
- * The GMAC registers are 16 or 32 bits wide.
- * The GMACs host processor interface is 16 bits wide,
- * therefore ALL registers will be addressed with 16 bit accesses.
- *
- * The following macros are provided to access the GMAC registers
- * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(),
- * GM_INHASH(), and GM_OUTHASH().
- * The macros are defined in SkGeHw.h.
- *
- * Note: NA reg = Network Address e.g DA, SA etc.
- *
- */
-
-/* Port Registers */
-#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */
-#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */
-#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */
-#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */
-#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */
-#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */
-#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */
-
-/* Source Address Registers */
-#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */
-#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */
-#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */
-#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */
-#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */
-#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */
-
-/* Multicast Address Hash Registers */
-#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */
-#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */
-#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */
-#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */
-
-/* Interrupt Source Registers */
-#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */
-#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */
-#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */
-
-/* Interrupt Mask Registers */
-#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */
-#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */
-#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */
-
-/* Serial Management Interface (SMI) Registers */
-#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */
-#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */
-#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */
-
-/* MIB Counters */
-#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */
-#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */
-
-/*
- * MIB Counters base address definitions (low word) -
- * use offset 4 for access to high word (32 bit r/o)
- */
-#define GM_RXF_UC_OK \
- (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */
-#define GM_RXF_BC_OK \
- (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */
-#define GM_RXF_MPAUSE \
- (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */
-#define GM_RXF_MC_OK \
- (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */
-#define GM_RXF_FCS_ERR \
- (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */
- /* GM_MIB_CNT_BASE + 40: reserved */
-#define GM_RXO_OK_LO \
- (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */
-#define GM_RXO_OK_HI \
- (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */
-#define GM_RXO_ERR_LO \
- (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */
-#define GM_RXO_ERR_HI \
- (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */
-#define GM_RXF_SHT \
- (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */
-#define GM_RXE_FRAG \
- (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */
-#define GM_RXF_64B \
- (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */
-#define GM_RXF_127B \
- (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */
-#define GM_RXF_255B \
- (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */
-#define GM_RXF_511B \
- (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */
-#define GM_RXF_1023B \
- (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */
-#define GM_RXF_1518B \
- (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */
-#define GM_RXF_MAX_SZ \
- (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */
-#define GM_RXF_LNG_ERR \
- (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */
-#define GM_RXF_JAB_PKT \
- (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */
- /* GM_MIB_CNT_BASE + 168: reserved */
-#define GM_RXE_FIFO_OV \
- (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */
- /* GM_MIB_CNT_BASE + 184: reserved */
-#define GM_TXF_UC_OK \
- (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */
-#define GM_TXF_BC_OK \
- (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */
-#define GM_TXF_MPAUSE \
- (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */
-#define GM_TXF_MC_OK \
- (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */
-#define GM_TXO_OK_LO \
- (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */
-#define GM_TXO_OK_HI \
- (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */
-#define GM_TXF_64B \
- (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */
-#define GM_TXF_127B \
- (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */
-#define GM_TXF_255B \
- (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */
-#define GM_TXF_511B \
- (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */
-#define GM_TXF_1023B \
- (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */
-#define GM_TXF_1518B \
- (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */
-#define GM_TXF_MAX_SZ \
- (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */
- /* GM_MIB_CNT_BASE + 296: reserved */
-#define GM_TXF_COL \
- (GM_MIB_CNT_BASE + 304) /* Tx Collision */
-#define GM_TXF_LAT_COL \
- (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */
-#define GM_TXF_ABO_COL \
- (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */
-#define GM_TXF_MUL_COL \
- (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */
-#define GM_TXF_SNG_COL \
- (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */
-#define GM_TXE_FIFO_UR \
- (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */
-
-/*----------------------------------------------------------------------------*/
-/*
- * GMAC Bit Definitions
- *
- * If the bit access behaviour differs from the register access behaviour
- * (r/w, r/o) this is documented after the bit number.
- * The following bit access behaviours are used:
- * (sc) self clearing
- * (r/o) read only
- */
-
-/* GM_GP_STAT 16 bit r/o General Purpose Status Register */
-#define GM_GPSR_SPEED (1<<15) /* Bit 15: Port Speed (1 = 100 Mbps) */
-#define GM_GPSR_DUPLEX (1<<14) /* Bit 14: Duplex Mode (1 = Full) */
-#define GM_GPSR_FC_TX_DIS (1<<13) /* Bit 13: Tx Flow-Control Mode Disabled */
-#define GM_GPSR_LINK_UP (1<<12) /* Bit 12: Link Up Status */
-#define GM_GPSR_PAUSE (1<<11) /* Bit 11: Pause State */
-#define GM_GPSR_TX_ACTIVE (1<<10) /* Bit 10: Tx in Progress */
-#define GM_GPSR_EXC_COL (1<<9) /* Bit 9: Excessive Collisions Occured */
-#define GM_GPSR_LAT_COL (1<<8) /* Bit 8: Late Collisions Occured */
- /* Bit 7..6: reserved */
-#define GM_GPSR_PHY_ST_CH (1<<5) /* Bit 5: PHY Status Change */
-#define GM_GPSR_GIG_SPEED (1<<4) /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */
-#define GM_GPSR_PART_MODE (1<<3) /* Bit 3: Partition mode */
-#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow-Control Mode Disabled */
-#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */
- /* Bit 0: reserved */
-
-/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
- /* Bit 15: reserved */
-#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */
-#define GM_GPCR_FC_TX_DIS (1<<13) /* Bit 13: Disable Tx Flow-Control Mode */
-#define GM_GPCR_TX_ENA (1<<12) /* Bit 12: Enable Transmit */
-#define GM_GPCR_RX_ENA (1<<11) /* Bit 11: Enable Receive */
-#define GM_GPCR_BURST_ENA (1<<10) /* Bit 10: Enable Burst Mode */
-#define GM_GPCR_LOOP_ENA (1<<9) /* Bit 9: Enable MAC Loopback Mode */
-#define GM_GPCR_PART_ENA (1<<8) /* Bit 8: Enable Partition Mode */
-#define GM_GPCR_GIGS_ENA (1<<7) /* Bit 7: Gigabit Speed (1000 Mbps) */
-#define GM_GPCR_FL_PASS (1<<6) /* Bit 6: Force Link Pass */
-#define GM_GPCR_DUP_FULL (1<<5) /* Bit 5: Full Duplex Mode */
-#define GM_GPCR_FC_RX_DIS (1<<4) /* Bit 4: Disable Rx Flow-Control Mode */
-#define GM_GPCR_SPEED_100 (1<<3) /* Bit 3: Port Speed 100 Mbps */
-#define GM_GPCR_AU_DUP_DIS (1<<2) /* Bit 2: Disable Auto-Update Duplex */
-#define GM_GPCR_AU_FCT_DIS (1<<1) /* Bit 1: Disable Auto-Update Flow-C. */
-#define GM_GPCR_AU_SPD_DIS (1<<0) /* Bit 0: Disable Auto-Update Speed */
-
-#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
-#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
- GM_GPCR_AU_SPD_DIS)
-
-/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
-#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */
-#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */
-#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */
-
-#define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK)
-
-#define TX_COL_DEF 0x04
-
-/* GM_RX_CTRL 16 bit r/w Receive Control Register */
-#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */
-#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */
-#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */
-#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */
-
-/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
-#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */
-#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */
-#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8..4: IPG Jam to Data */
- /* Bit 3..0: reserved */
-
-#define TX_JAM_LEN_VAL(x) (SHIFT14(x) & GM_TXPA_JAMLEN_MSK)
-#define TX_JAM_IPG_VAL(x) (SHIFT9(x) & GM_TXPA_JAMIPG_MSK)
-#define TX_IPG_JAM_DATA(x) (SHIFT4(x) & GM_TXPA_JAMDAT_MSK)
-
-#define TX_JAM_LEN_DEF 0x03
-#define TX_JAM_IPG_DEF 0x0b
-#define TX_IPG_JAM_DEF 0x1c
-
-/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */
-#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder (r/o) */
-#define GM_SMOD_LIMIT_4 (1<<10) /* Bit 10: 4 consecutive Tx trials */
-#define GM_SMOD_VLAN_ENA (1<<9) /* Bit 9: Enable VLAN (Max. Frame Len) */
-#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Len) */
- /* Bit 7..5: reserved */
-#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */
-
-#define DATA_BLIND_VAL(x) (SHIFT11(x) & GM_SMOD_DATABL_MSK)
-#define DATA_BLIND_DEF 0x04
-
-#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK)
-#define IPG_DATA_DEF 0x1e
-
-/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
-#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */
-#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */
-#define GM_SMI_CT_OP_RD (1<<5) /* Bit 5: OpCode Read (0=Write)*/
-#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */
-#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */
- /* Bit 2..0: reserved */
-
-#define GM_SMI_CT_PHY_AD(x) (SHIFT11(x) & GM_SMI_CT_PHY_A_MSK)
-#define GM_SMI_CT_REG_AD(x) (SHIFT6(x) & GM_SMI_CT_REG_A_MSK)
-
- /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
- /* Bit 15..6: reserved */
-#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */
-#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */
- /* Bit 3..0: reserved */
-
-/* Receive Frame Status Encoding */
-#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */
- /* Bit 15..14: reserved */
-#define GMR_FS_VLAN (1L<<13) /* Bit 13: VLAN Packet */
-#define GMR_FS_JABBER (1L<<12) /* Bit 12: Jabber Packet */
-#define GMR_FS_UN_SIZE (1L<<11) /* Bit 11: Undersize Packet */
-#define GMR_FS_MC (1L<<10) /* Bit 10: Multicast Packet */
-#define GMR_FS_BC (1L<<9) /* Bit 9: Broadcast Packet */
-#define GMR_FS_RX_OK (1L<<8) /* Bit 8: Receive OK (Good Packet) */
-#define GMR_FS_GOOD_FC (1L<<7) /* Bit 7: Good Flow-Control Packet */
-#define GMR_FS_BAD_FC (1L<<6) /* Bit 6: Bad Flow-Control Packet */
-#define GMR_FS_MII_ERR (1L<<5) /* Bit 5: MII Error */
-#define GMR_FS_LONG_ERR (1L<<4) /* Bit 4: Too Long Packet */
-#define GMR_FS_FRAGMENT (1L<<3) /* Bit 3: Fragment */
- /* Bit 2: reserved */
-#define GMR_FS_CRC_ERR (1L<<1) /* Bit 1: CRC Error */
-#define GMR_FS_RX_FF_OV (1L<<0) /* Bit 0: Rx FIFO Overflow */
-
-/*
- * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
- */
-#define GMR_FS_ANY_ERR (GMR_FS_CRC_ERR | \
- GMR_FS_LONG_ERR | \
- GMR_FS_MII_ERR | \
- GMR_FS_BAD_FC | \
- GMR_FS_GOOD_FC | \
- GMR_FS_JABBER)
-
-/* Rx GMAC FIFO Flush Mask (default) */
-#define RX_FF_FL_DEF_MSK (GMR_FS_CRC_ERR | \
- GMR_FS_RX_FF_OV | \
- GMR_FS_MII_ERR | \
- GMR_FS_BAD_FC | \
- GMR_FS_GOOD_FC | \
- GMR_FS_UN_SIZE | \
- GMR_FS_JABBER)
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __INC_XMAC_H */
diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
deleted file mode 100644
index 6e6c56aa6d6f294b19c7b332ecfe4ff5fceff60f..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/skaddr.c
+++ /dev/null
@@ -1,1788 +0,0 @@
-/******************************************************************************
- *
- * Name: skaddr.c
- * Project: Gigabit Ethernet Adapters, ADDR-Module
- * Version: $Revision: 1.52 $
- * Date: $Date: 2003/06/02 13:46:15 $
- * Purpose: Manage Addresses (Multicast and Unicast) and Promiscuous Mode.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage multicast addresses, address override,
- * and promiscuous mode on GEnesis and Yukon adapters.
- *
- * Address Layout:
- * port address: physical MAC address
- * 1st exact match: logical MAC address (GEnesis only)
- * 2nd exact match: RLMT multicast (GEnesis only)
- * exact match 3-13: OS-specific multicasts (GEnesis only)
- *
- * Include File Hierarchy:
- *
- * "skdrv1st.h"
- * "skdrv2nd.h"
- *
- ******************************************************************************/
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
- "@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell.";
-#endif /* DEBUG ||!LINT || !SK_SLIM */
-
-#define __SKADDR_C
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* cplusplus */
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* defines ********************************************************************/
-
-
-#define XMAC_POLY 0xEDB88320UL /* CRC32-Poly - XMAC: Little Endian */
-#define GMAC_POLY 0x04C11DB7L /* CRC16-Poly - GMAC: Little Endian */
-#define HASH_BITS 6 /* #bits in hash */
-#define SK_MC_BIT 0x01
-
-/* Error numbers and messages. */
-
-#define SKERR_ADDR_E001 (SK_ERRBASE_ADDR + 0)
-#define SKERR_ADDR_E001MSG "Bad Flags."
-#define SKERR_ADDR_E002 (SKERR_ADDR_E001 + 1)
-#define SKERR_ADDR_E002MSG "New Error."
-
-/* typedefs *******************************************************************/
-
-/* None. */
-
-/* global variables ***********************************************************/
-
-/* 64-bit hash values with all bits set. */
-
-static const SK_U16 OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
-
-/* local variables ************************************************************/
-
-#ifdef DEBUG
-static int Next0[SK_MAX_MACS] = {0};
-#endif /* DEBUG */
-
-static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
- SK_MAC_ADDR *pMc, int Flags);
-static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
- int Flags);
-static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
-static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
- SK_U32 PortNumber, int NewPromMode);
-static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
- SK_MAC_ADDR *pMc, int Flags);
-static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
- int Flags);
-static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
-static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
- SK_U32 PortNumber, int NewPromMode);
-
-/* functions ******************************************************************/
-
-/******************************************************************************
- *
- * SkAddrInit - initialize data, set state to init
- *
- * Description:
- *
- * SK_INIT_DATA
- * ============
- *
- * This routine clears the multicast tables and resets promiscuous mode.
- * Some entries are reserved for the "logical MAC address", the
- * SK-RLMT multicast address, and the BPDU multicast address.
- *
- *
- * SK_INIT_IO
- * ==========
- *
- * All permanent MAC addresses are read from EPROM.
- * If the current MAC addresses are not already set in software,
- * they are set to the values of the permanent addresses.
- * The current addresses are written to the corresponding MAC.
- *
- *
- * SK_INIT_RUN
- * ===========
- *
- * Nothing.
- *
- * Context:
- * init, pageable
- *
- * Returns:
- * SK_ADDR_SUCCESS
- */
-int SkAddrInit(
-SK_AC *pAC, /* the adapter context */
-SK_IOC IoC, /* I/O context */
-int Level) /* initialization level */
-{
- int j;
- SK_U32 i;
- SK_U8 *InAddr;
- SK_U16 *OutAddr;
- SK_ADDR_PORT *pAPort;
-
- switch (Level) {
- case SK_INIT_DATA:
- SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0,
- (SK_U16) sizeof(SK_ADDR));
-
- for (i = 0; i < SK_MAX_MACS; i++) {
- pAPort = &pAC->Addr.Port[i];
- pAPort->PromMode = SK_PROM_MODE_NONE;
-
- pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
- pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
- pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
- pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
- }
-#ifdef xDEBUG
- for (i = 0; i < SK_MAX_MACS; i++) {
- if (pAC->Addr.Port[i].NextExactMatchRlmt <
- SK_ADDR_FIRST_MATCH_RLMT) {
- Next0[i] |= 4;
- }
- }
-#endif /* DEBUG */
- /* pAC->Addr.InitDone = SK_INIT_DATA; */
- break;
-
- case SK_INIT_IO:
-#ifndef SK_NO_RLMT
- for (i = 0; i < SK_MAX_NETS; i++) {
- pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort;
- }
-#endif /* !SK_NO_RLMT */
-#ifdef xDEBUG
- for (i = 0; i < SK_MAX_MACS; i++) {
- if (pAC->Addr.Port[i].NextExactMatchRlmt <
- SK_ADDR_FIRST_MATCH_RLMT) {
- Next0[i] |= 8;
- }
- }
-#endif /* DEBUG */
-
- /* Read permanent logical MAC address from Control Register File. */
- for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
- InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j];
- SK_IN8(IoC, B2_MAC_1 + j, InAddr);
- }
-
- if (!pAC->Addr.Net[0].CurrentMacAddressSet) {
- /* Set the current logical MAC address to the permanent one. */
- pAC->Addr.Net[0].CurrentMacAddress =
- pAC->Addr.Net[0].PermanentMacAddress;
- pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE;
- }
-
- /* Set the current logical MAC address. */
- pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] =
- pAC->Addr.Net[0].CurrentMacAddress;
-#if SK_MAX_NETS > 1
- /* Set logical MAC address for net 2 to (log | 3). */
- if (!pAC->Addr.Net[1].CurrentMacAddressSet) {
- pAC->Addr.Net[1].PermanentMacAddress =
- pAC->Addr.Net[0].PermanentMacAddress;
- pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3;
- /* Set the current logical MAC address to the permanent one. */
- pAC->Addr.Net[1].CurrentMacAddress =
- pAC->Addr.Net[1].PermanentMacAddress;
- pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE;
- }
-#endif /* SK_MAX_NETS > 1 */
-
-#ifdef DEBUG
- for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
- ("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
- i,
- pAC->Addr.Net[i].PermanentMacAddress.a[0],
- pAC->Addr.Net[i].PermanentMacAddress.a[1],
- pAC->Addr.Net[i].PermanentMacAddress.a[2],
- pAC->Addr.Net[i].PermanentMacAddress.a[3],
- pAC->Addr.Net[i].PermanentMacAddress.a[4],
- pAC->Addr.Net[i].PermanentMacAddress.a[5]))
-
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
- ("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
- i,
- pAC->Addr.Net[i].CurrentMacAddress.a[0],
- pAC->Addr.Net[i].CurrentMacAddress.a[1],
- pAC->Addr.Net[i].CurrentMacAddress.a[2],
- pAC->Addr.Net[i].CurrentMacAddress.a[3],
- pAC->Addr.Net[i].CurrentMacAddress.a[4],
- pAC->Addr.Net[i].CurrentMacAddress.a[5]))
- }
-#endif /* DEBUG */
-
- for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
- pAPort = &pAC->Addr.Port[i];
-
- /* Read permanent port addresses from Control Register File. */
- for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
- InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j];
- SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr);
- }
-
- if (!pAPort->CurrentMacAddressSet) {
- /*
- * Set the current and previous physical MAC address
- * of this port to its permanent MAC address.
- */
- pAPort->CurrentMacAddress = pAPort->PermanentMacAddress;
- pAPort->PreviousMacAddress = pAPort->PermanentMacAddress;
- pAPort->CurrentMacAddressSet = SK_TRUE;
- }
-
- /* Set port's current physical MAC address. */
- OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- XM_OUTADDR(IoC, i, XM_SA, OutAddr);
- }
-#endif /* GENESIS */
-#ifdef YUKON
- if (!pAC->GIni.GIGenesis) {
- GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr);
- }
-#endif /* YUKON */
-#ifdef DEBUG
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
- ("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
- pAPort->PermanentMacAddress.a[0],
- pAPort->PermanentMacAddress.a[1],
- pAPort->PermanentMacAddress.a[2],
- pAPort->PermanentMacAddress.a[3],
- pAPort->PermanentMacAddress.a[4],
- pAPort->PermanentMacAddress.a[5]))
-
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
- ("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
- pAPort->CurrentMacAddress.a[0],
- pAPort->CurrentMacAddress.a[1],
- pAPort->CurrentMacAddress.a[2],
- pAPort->CurrentMacAddress.a[3],
- pAPort->CurrentMacAddress.a[4],
- pAPort->CurrentMacAddress.a[5]))
-#endif /* DEBUG */
- }
- /* pAC->Addr.InitDone = SK_INIT_IO; */
- break;
-
- case SK_INIT_RUN:
-#ifdef xDEBUG
- for (i = 0; i < SK_MAX_MACS; i++) {
- if (pAC->Addr.Port[i].NextExactMatchRlmt <
- SK_ADDR_FIRST_MATCH_RLMT) {
- Next0[i] |= 16;
- }
- }
-#endif /* DEBUG */
-
- /* pAC->Addr.InitDone = SK_INIT_RUN; */
- break;
-
- default: /* error */
- break;
- }
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrInit */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- * SkAddrMcClear - clear the multicast table
- *
- * Description:
- * This routine clears the multicast table.
- *
- * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- * immediately.
- *
- * It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according
- * to the adapter in use. The real work is done there.
- *
- * Context:
- * runtime, pageable
- * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- * may be called after SK_INIT_IO without limitation
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-int SkAddrMcClear(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Index of affected port */
-int Flags) /* permanent/non-perm, sw-only */
-{
- int ReturnCode;
-
- if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-
- if (pAC->GIni.GIGenesis) {
- ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags);
- }
- else {
- ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags);
- }
-
- return (ReturnCode);
-
-} /* SkAddrMcClear */
-
-#endif /* !SK_SLIM */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- * SkAddrXmacMcClear - clear the multicast table
- *
- * Description:
- * This routine clears the multicast table
- * (either entry 2 or entries 3-16 and InexactFilter) of the given port.
- * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- * immediately.
- *
- * Context:
- * runtime, pageable
- * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- * may be called after SK_INIT_IO without limitation
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-static int SkAddrXmacMcClear(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Index of affected port */
-int Flags) /* permanent/non-perm, sw-only */
-{
- int i;
-
- if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
-
- /* Clear RLMT multicast addresses. */
- pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
- }
- else { /* not permanent => DRV */
-
- /* Clear InexactFilter */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
- }
-
- /* Clear DRV multicast addresses. */
-
- pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
- }
-
- if (!(Flags & SK_MC_SW_ONLY)) {
- (void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
- }
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrXmacMcClear */
-
-#endif /* !SK_SLIM */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- * SkAddrGmacMcClear - clear the multicast table
- *
- * Description:
- * This routine clears the multicast hashing table (InexactFilter)
- * (either the RLMT or the driver bits) of the given port.
- *
- * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- * immediately.
- *
- * Context:
- * runtime, pageable
- * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- * may be called after SK_INIT_IO without limitation
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-static int SkAddrGmacMcClear(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Index of affected port */
-int Flags) /* permanent/non-perm, sw-only */
-{
- int i;
-
-#ifdef DEBUG
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
-#endif /* DEBUG */
-
- /* Clear InexactFilter */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
- }
-
- if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
-
- /* Copy DRV bits to InexactFilter. */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
-
- /* Clear InexactRlmtFilter. */
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0;
-
- }
- }
- else { /* not permanent => DRV */
-
- /* Copy RLMT bits to InexactFilter. */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
-
- /* Clear InexactDrvFilter. */
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0;
- }
- }
-
-#ifdef DEBUG
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
-#endif /* DEBUG */
-
- if (!(Flags & SK_MC_SW_ONLY)) {
- (void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
- }
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrGmacMcClear */
-
-#ifndef SK_ADDR_CHEAT
-
-/******************************************************************************
- *
- * SkXmacMcHash - hash multicast address
- *
- * Description:
- * This routine computes the hash value for a multicast address.
- * A CRC32 algorithm is used.
- *
- * Notes:
- * The code was adapted from the XaQti data sheet.
- *
- * Context:
- * runtime, pageable
- *
- * Returns:
- * Hash value of multicast address.
- */
-static SK_U32 SkXmacMcHash(
-unsigned char *pMc) /* Multicast address */
-{
- SK_U32 Idx;
- SK_U32 Bit;
- SK_U32 Data;
- SK_U32 Crc;
-
- Crc = 0xFFFFFFFFUL;
- for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) {
- Data = *pMc++;
- for (Bit = 0; Bit < 8; Bit++, Data >>= 1) {
- Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0);
- }
- }
-
- return (Crc & ((1 << HASH_BITS) - 1));
-
-} /* SkXmacMcHash */
-
-
-/******************************************************************************
- *
- * SkGmacMcHash - hash multicast address
- *
- * Description:
- * This routine computes the hash value for a multicast address.
- * A CRC16 algorithm is used.
- *
- * Notes:
- *
- *
- * Context:
- * runtime, pageable
- *
- * Returns:
- * Hash value of multicast address.
- */
-static SK_U32 SkGmacMcHash(
-unsigned char *pMc) /* Multicast address */
-{
- SK_U32 Data;
- SK_U32 TmpData;
- SK_U32 Crc;
- int Byte;
- int Bit;
-
- Crc = 0xFFFFFFFFUL;
- for (Byte = 0; Byte < 6; Byte++) {
- /* Get next byte. */
- Data = (SK_U32) pMc[Byte];
-
- /* Change bit order in byte. */
- TmpData = Data;
- for (Bit = 0; Bit < 8; Bit++) {
- if (TmpData & 1L) {
- Data |= 1L << (7 - Bit);
- }
- else {
- Data &= ~(1L << (7 - Bit));
- }
- TmpData >>= 1;
- }
-
- Crc ^= (Data << 24);
- for (Bit = 0; Bit < 8; Bit++) {
- if (Crc & 0x80000000) {
- Crc = (Crc << 1) ^ GMAC_POLY;
- }
- else {
- Crc <<= 1;
- }
- }
- }
-
- return (Crc & ((1 << HASH_BITS) - 1));
-
-} /* SkGmacMcHash */
-
-#endif /* !SK_ADDR_CHEAT */
-
-/******************************************************************************
- *
- * SkAddrMcAdd - add a multicast address to a port
- *
- * Description:
- * This routine enables reception for a given address on the given port.
- *
- * It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the
- * adapter in use. The real work is done there.
- *
- * Notes:
- * The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_DATA
- *
- * Returns:
- * SK_MC_FILTERING_EXACT
- * SK_MC_FILTERING_INEXACT
- * SK_MC_ILLEGAL_ADDRESS
- * SK_MC_ILLEGAL_PORT
- * SK_MC_RLMT_OVERFLOW
- */
-int SkAddrMcAdd(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Port Number */
-SK_MAC_ADDR *pMc, /* multicast address to be added */
-int Flags) /* permanent/non-permanent */
-{
- int ReturnCode;
-
- if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-
- if (pAC->GIni.GIGenesis) {
- ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
- }
- else {
- ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
- }
-
- return (ReturnCode);
-
-} /* SkAddrMcAdd */
-
-
-/******************************************************************************
- *
- * SkAddrXmacMcAdd - add a multicast address to a port
- *
- * Description:
- * This routine enables reception for a given address on the given port.
- *
- * Notes:
- * The return code is only valid for SK_PROM_MODE_NONE.
- *
- * The multicast bit is only checked if there are no free exact match
- * entries.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_DATA
- *
- * Returns:
- * SK_MC_FILTERING_EXACT
- * SK_MC_FILTERING_INEXACT
- * SK_MC_ILLEGAL_ADDRESS
- * SK_MC_RLMT_OVERFLOW
- */
-static int SkAddrXmacMcAdd(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Port Number */
-SK_MAC_ADDR *pMc, /* multicast address to be added */
-int Flags) /* permanent/non-permanent */
-{
- int i;
- SK_U8 Inexact;
-#ifndef SK_ADDR_CHEAT
- SK_U32 HashBit;
-#endif /* !defined(SK_ADDR_CHEAT) */
-
- if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
-#ifdef xDEBUG
- if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt <
- SK_ADDR_FIRST_MATCH_RLMT) {
- Next0[PortNumber] |= 1;
- return (SK_MC_RLMT_OVERFLOW);
- }
-#endif /* DEBUG */
-
- if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt >
- SK_ADDR_LAST_MATCH_RLMT) {
- return (SK_MC_RLMT_OVERFLOW);
- }
-
- /* Set a RLMT multicast address. */
-
- pAC->Addr.Port[PortNumber].Exact[
- pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc;
-
- return (SK_MC_FILTERING_EXACT);
- }
-
-#ifdef xDEBUG
- if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <
- SK_ADDR_FIRST_MATCH_DRV) {
- Next0[PortNumber] |= 2;
- return (SK_MC_RLMT_OVERFLOW);
- }
-#endif /* DEBUG */
-
- if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
-
- /* Set exact match entry. */
- pAC->Addr.Port[PortNumber].Exact[
- pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc;
-
- /* Clear InexactFilter */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
- }
- }
- else {
- if (!(pMc->a[0] & SK_MC_BIT)) {
- /* Hashing only possible with multicast addresses */
- return (SK_MC_ILLEGAL_ADDRESS);
- }
-#ifndef SK_ADDR_CHEAT
- /* Compute hash value of address. */
- HashBit = 63 - SkXmacMcHash(&pMc->a[0]);
-
- /* Add bit to InexactFilter. */
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |=
- 1 << (HashBit % 8);
-#else /* SK_ADDR_CHEAT */
- /* Set all bits in InexactFilter. */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
- }
-#endif /* SK_ADDR_CHEAT */
- }
-
- for (Inexact = 0, i = 0; i < 8; i++) {
- Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
- }
-
- if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) {
- return (SK_MC_FILTERING_EXACT);
- }
- else {
- return (SK_MC_FILTERING_INEXACT);
- }
-
-} /* SkAddrXmacMcAdd */
-
-
-/******************************************************************************
- *
- * SkAddrGmacMcAdd - add a multicast address to a port
- *
- * Description:
- * This routine enables reception for a given address on the given port.
- *
- * Notes:
- * The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_DATA
- *
- * Returns:
- * SK_MC_FILTERING_INEXACT
- * SK_MC_ILLEGAL_ADDRESS
- */
-static int SkAddrGmacMcAdd(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Port Number */
-SK_MAC_ADDR *pMc, /* multicast address to be added */
-int Flags) /* permanent/non-permanent */
-{
- int i;
-#ifndef SK_ADDR_CHEAT
- SK_U32 HashBit;
-#endif /* !defined(SK_ADDR_CHEAT) */
-
- if (!(pMc->a[0] & SK_MC_BIT)) {
- /* Hashing only possible with multicast addresses */
- return (SK_MC_ILLEGAL_ADDRESS);
- }
-
-#ifndef SK_ADDR_CHEAT
-
- /* Compute hash value of address. */
- HashBit = SkGmacMcHash(&pMc->a[0]);
-
- if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */
-
- /* Add bit to InexactRlmtFilter. */
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |=
- 1 << (HashBit % 8);
-
- /* Copy bit to InexactFilter. */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
- }
-#ifdef DEBUG
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6],
- pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7]))
-#endif /* DEBUG */
- }
- else { /* not permanent => DRV */
-
- /* Add bit to InexactDrvFilter. */
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |=
- 1 << (HashBit % 8);
-
- /* Copy bit to InexactFilter. */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
- }
-#ifdef DEBUG
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6],
- pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7]))
-#endif /* DEBUG */
- }
-
-#else /* SK_ADDR_CHEAT */
-
- /* Set all bits in InexactFilter. */
- for (i = 0; i < 8; i++) {
- pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
- }
-#endif /* SK_ADDR_CHEAT */
-
- return (SK_MC_FILTERING_INEXACT);
-
-} /* SkAddrGmacMcAdd */
-
-#endif /* !SK_SLIM */
-
-/******************************************************************************
- *
- * SkAddrMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- * This routine enables reception of the addresses contained in a local
- * table for a given port.
- * It also programs the port's current physical MAC address.
- *
- * It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according
- * to the adapter in use. The real work is done there.
- *
- * Notes:
- * The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_MC_FILTERING_EXACT
- * SK_MC_FILTERING_INEXACT
- * SK_ADDR_ILLEGAL_PORT
- */
-int SkAddrMcUpdate(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber) /* Port Number */
-{
- int ReturnCode = 0;
-#if (!defined(SK_SLIM) || defined(DEBUG))
- if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-#endif /* !SK_SLIM || DEBUG */
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
- }
-#endif /* GENESIS */
-#ifdef YUKON
- if (!pAC->GIni.GIGenesis) {
- ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
- }
-#endif /* YUKON */
- return (ReturnCode);
-
-} /* SkAddrMcUpdate */
-
-
-#ifdef GENESIS
-
-/******************************************************************************
- *
- * SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- * This routine enables reception of the addresses contained in a local
- * table for a given port.
- * It also programs the port's current physical MAC address.
- *
- * Notes:
- * The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_MC_FILTERING_EXACT
- * SK_MC_FILTERING_INEXACT
- * SK_ADDR_ILLEGAL_PORT
- */
-static int SkAddrXmacMcUpdate(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber) /* Port Number */
-{
- SK_U32 i;
- SK_U8 Inexact;
- SK_U16 *OutAddr;
- SK_ADDR_PORT *pAPort;
-
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrXmacMcUpdate on Port %u.\n", PortNumber))
-
- pAPort = &pAC->Addr.Port[PortNumber];
-
-#ifdef DEBUG
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
-#endif /* DEBUG */
-
- /* Start with 0 to also program the logical MAC address. */
- for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
- /* Set exact match address i on XMAC */
- OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
- XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
- }
-
- /* Clear other permanent exact match addresses on XMAC */
- if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) {
-
- SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt,
- SK_ADDR_LAST_MATCH_RLMT);
- }
-
- for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) {
- OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
- XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
- }
-
- /* Clear other non-permanent exact match addresses on XMAC */
- if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
-
- SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv,
- SK_ADDR_LAST_MATCH_DRV);
- }
-
- for (Inexact = 0, i = 0; i < 8; i++) {
- Inexact |= pAPort->InexactFilter.Bytes[i];
- }
-
- if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
-
- /* Set all bits in 64-bit hash register. */
- XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- else if (Inexact != 0) {
-
- /* Set 64-bit hash register to InexactFilter. */
- XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- else {
- /* Disable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
- }
-
- if (pAPort->PromMode != SK_PROM_MODE_NONE) {
- (void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
- }
-
- /* Set port's current physical MAC address. */
- OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-
- XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
-
-#ifdef xDEBUG
- for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
- SK_U8 InAddr8[6];
- SK_U16 *InAddr;
-
- /* Get exact match address i from port PortNumber. */
- InAddr = (SK_U16 *) &InAddr8[0];
-
- XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr);
-
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrXmacMcUpdate: MC address %d on Port %u: ",
- "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n",
- i,
- PortNumber,
- InAddr8[0],
- InAddr8[1],
- InAddr8[2],
- InAddr8[3],
- InAddr8[4],
- InAddr8[5],
- pAPort->Exact[i].a[0],
- pAPort->Exact[i].a[1],
- pAPort->Exact[i].a[2],
- pAPort->Exact[i].a[3],
- pAPort->Exact[i].a[4],
- pAPort->Exact[i].a[5]))
- }
-#endif /* DEBUG */
-
- /* Determine return value. */
- if (Inexact == 0 && pAPort->PromMode == 0) {
- return (SK_MC_FILTERING_EXACT);
- }
- else {
- return (SK_MC_FILTERING_INEXACT);
- }
-
-} /* SkAddrXmacMcUpdate */
-
-#endif /* GENESIS */
-
-#ifdef YUKON
-
-/******************************************************************************
- *
- * SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- * This routine enables reception of the addresses contained in a local
- * table for a given port.
- * It also programs the port's current physical MAC address.
- *
- * Notes:
- * The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_MC_FILTERING_EXACT
- * SK_MC_FILTERING_INEXACT
- * SK_ADDR_ILLEGAL_PORT
- */
-static int SkAddrGmacMcUpdate(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber) /* Port Number */
-{
-#ifndef SK_SLIM
- SK_U32 i;
- SK_U8 Inexact;
-#endif /* not SK_SLIM */
- SK_U16 *OutAddr;
- SK_ADDR_PORT *pAPort;
-
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrGmacMcUpdate on Port %u.\n", PortNumber))
-
- pAPort = &pAC->Addr.Port[PortNumber];
-
-#ifdef DEBUG
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
-#endif /* DEBUG */
-
-#ifndef SK_SLIM
- for (Inexact = 0, i = 0; i < 8; i++) {
- Inexact |= pAPort->InexactFilter.Bytes[i];
- }
-
- /* Set 64-bit hash register to InexactFilter. */
- GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
- &pAPort->InexactFilter.Bytes[0]);
-
- if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
-
- /* Set all bits in 64-bit hash register. */
- GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- else {
- /* Enable Hashing. */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
-
- if (pAPort->PromMode != SK_PROM_MODE_NONE) {
- (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
- }
-#else /* SK_SLIM */
-
- /* Set all bits in 64-bit hash register. */
- GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-
- (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-
-#endif /* SK_SLIM */
-
- /* Set port's current physical MAC address. */
- OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
- GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
-
- /* Set port's current logical MAC address. */
- OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0];
- GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr);
-
-#ifdef DEBUG
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
- pAPort->Exact[0].a[0],
- pAPort->Exact[0].a[1],
- pAPort->Exact[0].a[2],
- pAPort->Exact[0].a[3],
- pAPort->Exact[0].a[4],
- pAPort->Exact[0].a[5]))
-
- SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
- pAPort->CurrentMacAddress.a[0],
- pAPort->CurrentMacAddress.a[1],
- pAPort->CurrentMacAddress.a[2],
- pAPort->CurrentMacAddress.a[3],
- pAPort->CurrentMacAddress.a[4],
- pAPort->CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-
-#ifndef SK_SLIM
- /* Determine return value. */
- if (Inexact == 0 && pAPort->PromMode == 0) {
- return (SK_MC_FILTERING_EXACT);
- }
- else {
- return (SK_MC_FILTERING_INEXACT);
- }
-#else /* SK_SLIM */
- return (SK_MC_FILTERING_INEXACT);
-#endif /* SK_SLIM */
-
-} /* SkAddrGmacMcUpdate */
-
-#endif /* YUKON */
-
-#ifndef SK_NO_MAO
-
-/******************************************************************************
- *
- * SkAddrOverride - override a port's MAC address
- *
- * Description:
- * This routine overrides the MAC address of one port.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_ADDR_SUCCESS if successful.
- * SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address.
- * SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address.
- * SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before.
- */
-int SkAddrOverride(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* Port Number */
-SK_MAC_ADDR SK_FAR *pNewAddr, /* new MAC address */
-int Flags) /* logical/physical MAC address */
-{
-#ifndef SK_NO_RLMT
- SK_EVPARA Para;
-#endif /* !SK_NO_RLMT */
- SK_U32 NetNumber;
- SK_U32 i;
- SK_U16 SK_FAR *OutAddr;
-
-#ifndef SK_NO_RLMT
- NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber;
-#else
- NetNumber = 0;
-#endif /* SK_NO_RLMT */
-#if (!defined(SK_SLIM) || defined(DEBUG))
- if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-#endif /* !SK_SLIM || DEBUG */
- if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) {
- return (SK_ADDR_MULTICAST_ADDRESS);
- }
-
- if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) {
- return (SK_ADDR_TOO_EARLY);
- }
-
- if (Flags & SK_ADDR_SET_LOGICAL) { /* Activate logical MAC address. */
- /* Parameter *pNewAddr is ignored. */
- for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
- if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
- return (SK_ADDR_TOO_EARLY);
- }
- }
-#ifndef SK_NO_RLMT
- /* Set PortNumber to number of net's active port. */
- PortNumber = pAC->Rlmt.Net[NetNumber].
- Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
- pAC->Addr.Port[PortNumber].Exact[0] =
- pAC->Addr.Net[NetNumber].CurrentMacAddress;
-
- /* Write address to first exact match entry of active port. */
- (void) SkAddrMcUpdate(pAC, IoC, PortNumber);
- }
- else if (Flags & SK_ADDR_CLEAR_LOGICAL) {
- /* Deactivate logical MAC address. */
- /* Parameter *pNewAddr is ignored. */
- for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
- if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
- return (SK_ADDR_TOO_EARLY);
- }
- }
-#ifndef SK_NO_RLMT
- /* Set PortNumber to number of net's active port. */
- PortNumber = pAC->Rlmt.Net[NetNumber].
- Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
- for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) {
- pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0;
- }
-
- /* Write address to first exact match entry of active port. */
- (void) SkAddrMcUpdate(pAC, IoC, PortNumber);
- }
- else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) { /* Physical MAC address. */
- if (SK_ADDR_EQUAL(pNewAddr->a,
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
- return (SK_ADDR_DUPLICATE_ADDRESS);
- }
-
- for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
- if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
- return (SK_ADDR_TOO_EARLY);
- }
-
- if (SK_ADDR_EQUAL(pNewAddr->a,
- pAC->Addr.Port[i].CurrentMacAddress.a)) {
- if (i == PortNumber) {
- return (SK_ADDR_SUCCESS);
- }
- else {
- return (SK_ADDR_DUPLICATE_ADDRESS);
- }
- }
- }
-
- pAC->Addr.Port[PortNumber].PreviousMacAddress =
- pAC->Addr.Port[PortNumber].CurrentMacAddress;
- pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
-
- /* Change port's physical MAC address. */
- OutAddr = (SK_U16 SK_FAR *) pNewAddr;
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
- }
-#endif /* GENESIS */
-#ifdef YUKON
- if (!pAC->GIni.GIGenesis) {
- GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
- }
-#endif /* YUKON */
-
-#ifndef SK_NO_RLMT
- /* Report address change to RLMT. */
- Para.Para32[0] = PortNumber;
- Para.Para32[0] = -1;
- SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
-#endif /* !SK_NO_RLMT */
- }
- else { /* Logical MAC address. */
- if (SK_ADDR_EQUAL(pNewAddr->a,
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
- return (SK_ADDR_SUCCESS);
- }
-
- for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
- if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
- return (SK_ADDR_TOO_EARLY);
- }
-
- if (SK_ADDR_EQUAL(pNewAddr->a,
- pAC->Addr.Port[i].CurrentMacAddress.a)) {
- return (SK_ADDR_DUPLICATE_ADDRESS);
- }
- }
-
- /*
- * In case that the physical and the logical MAC addresses are equal
- * we must also change the physical MAC address here.
- * In this case we have an adapter which initially was programmed with
- * two identical MAC addresses.
- */
- if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a,
- pAC->Addr.Port[PortNumber].Exact[0].a)) {
-
- pAC->Addr.Port[PortNumber].PreviousMacAddress =
- pAC->Addr.Port[PortNumber].CurrentMacAddress;
- pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
-
-#ifndef SK_NO_RLMT
- /* Report address change to RLMT. */
- Para.Para32[0] = PortNumber;
- Para.Para32[0] = -1;
- SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
-#endif /* !SK_NO_RLMT */
- }
-
-#ifndef SK_NO_RLMT
- /* Set PortNumber to number of net's active port. */
- PortNumber = pAC->Rlmt.Net[NetNumber].
- Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
- pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr;
- pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr;
-#ifdef DEBUG
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n",
- pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0],
- pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1],
- pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2],
- pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3],
- pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4],
- pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5]))
-
- SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
- ("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n",
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0],
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1],
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2],
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3],
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4],
- pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-
- /* Write address to first exact match entry of active port. */
- (void) SkAddrMcUpdate(pAC, IoC, PortNumber);
- }
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrOverride */
-
-
-#endif /* SK_NO_MAO */
-
-/******************************************************************************
- *
- * SkAddrPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- * This routine manages promiscuous mode:
- * - none
- * - all LLC frames
- * - all MC frames
- *
- * It calls either SkAddrXmacPromiscuousChange or
- * SkAddrGmacPromiscuousChange, according to the adapter in use.
- * The real work is done there.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-int SkAddrPromiscuousChange(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* port whose promiscuous mode changes */
-int NewPromMode) /* new promiscuous mode */
-{
- int ReturnCode = 0;
-#if (!defined(SK_SLIM) || defined(DEBUG))
- if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-#endif /* !SK_SLIM || DEBUG */
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- ReturnCode =
- SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
- }
-#endif /* GENESIS */
-#ifdef YUKON
- if (!pAC->GIni.GIGenesis) {
- ReturnCode =
- SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
- }
-#endif /* YUKON */
-
- return (ReturnCode);
-
-} /* SkAddrPromiscuousChange */
-
-#ifdef GENESIS
-
-/******************************************************************************
- *
- * SkAddrXmacPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- * This routine manages promiscuous mode:
- * - none
- * - all LLC frames
- * - all MC frames
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-static int SkAddrXmacPromiscuousChange(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* port whose promiscuous mode changes */
-int NewPromMode) /* new promiscuous mode */
-{
- int i;
- SK_BOOL InexactModeBit;
- SK_U8 Inexact;
- SK_U8 HwInexact;
- SK_FILTER64 HwInexactFilter;
- SK_U16 LoMode; /* Lower 16 bits of XMAC Mode Register. */
- int CurPromMode = SK_PROM_MODE_NONE;
-
- /* Read CurPromMode from Hardware. */
- XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
-
- if ((LoMode & XM_MD_ENA_PROM) != 0) {
- /* Promiscuous mode! */
- CurPromMode |= SK_PROM_MODE_LLC;
- }
-
- for (Inexact = 0xFF, i = 0; i < 8; i++) {
- Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
- }
- if (Inexact == 0xFF) {
- CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
- }
- else {
- /* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */
- XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
-
- InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0;
-
- /* Read 64-bit hash register from XMAC */
- XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]);
-
- for (HwInexact = 0xFF, i = 0; i < 8; i++) {
- HwInexact &= HwInexactFilter.Bytes[i];
- }
-
- if (InexactModeBit && (HwInexact == 0xFF)) {
- CurPromMode |= SK_PROM_MODE_ALL_MC;
- }
- }
-
- pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
-
- if (NewPromMode == CurPromMode) {
- return (SK_ADDR_SUCCESS);
- }
-
- if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
- !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC. */
-
- /* Set all bits in 64-bit hash register. */
- XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- else if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
- !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm MC. */
- for (Inexact = 0, i = 0; i < 8; i++) {
- Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
- }
- if (Inexact == 0) {
- /* Disable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
- }
- else {
- /* Set 64-bit hash register to InexactFilter. */
- XM_OUTHASH(IoC, PortNumber, XM_HSM,
- &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- }
-
- if ((NewPromMode & SK_PROM_MODE_LLC) &&
- !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */
- /* Set the MAC in Promiscuous Mode */
- SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- else if ((CurPromMode & SK_PROM_MODE_LLC) &&
- !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC. */
- /* Clear Promiscuous Mode */
- SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
- }
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrXmacPromiscuousChange */
-
-#endif /* GENESIS */
-
-#ifdef YUKON
-
-/******************************************************************************
- *
- * SkAddrGmacPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- * This routine manages promiscuous mode:
- * - none
- * - all LLC frames
- * - all MC frames
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-static int SkAddrGmacPromiscuousChange(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 PortNumber, /* port whose promiscuous mode changes */
-int NewPromMode) /* new promiscuous mode */
-{
- SK_U16 ReceiveControl; /* GMAC Receive Control Register */
- int CurPromMode = SK_PROM_MODE_NONE;
-
- /* Read CurPromMode from Hardware. */
- GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl);
-
- if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) {
- /* Promiscuous mode! */
- CurPromMode |= SK_PROM_MODE_LLC;
- }
-
- if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) {
- /* All Multicast mode! */
- CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
- }
-
- pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
-
- if (NewPromMode == CurPromMode) {
- return (SK_ADDR_SUCCESS);
- }
-
- if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
- !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC */
-
- /* Set all bits in 64-bit hash register. */
- GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-
- /* Enable Hashing */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
-
- if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
- !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm. MC */
-
- /* Set 64-bit hash register to InexactFilter. */
- GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
- &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
-
- /* Enable Hashing. */
- SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
-
- if ((NewPromMode & SK_PROM_MODE_LLC) &&
- !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */
-
- /* Set the MAC to Promiscuous Mode. */
- SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
- }
- else if ((CurPromMode & SK_PROM_MODE_LLC) &&
- !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC */
-
- /* Clear Promiscuous Mode. */
- SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
- }
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrGmacPromiscuousChange */
-
-#endif /* YUKON */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- * SkAddrSwap - swap address info
- *
- * Description:
- * This routine swaps address info of two ports.
- *
- * Context:
- * runtime, pageable
- * may be called after SK_INIT_IO
- *
- * Returns:
- * SK_ADDR_SUCCESS
- * SK_ADDR_ILLEGAL_PORT
- */
-int SkAddrSwap(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-SK_U32 FromPortNumber, /* Port1 Index */
-SK_U32 ToPortNumber) /* Port2 Index */
-{
- int i;
- SK_U8 Byte;
- SK_MAC_ADDR MacAddr;
- SK_U32 DWord;
-
- if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-
- if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-
- if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) {
- return (SK_ADDR_ILLEGAL_PORT);
- }
-
- /*
- * Swap:
- * - Exact Match Entries (GEnesis and Yukon)
- * Yukon uses first entry for the logical MAC
- * address (stored in the second GMAC register).
- * - FirstExactMatchRlmt (GEnesis only)
- * - NextExactMatchRlmt (GEnesis only)
- * - FirstExactMatchDrv (GEnesis only)
- * - NextExactMatchDrv (GEnesis only)
- * - 64-bit filter (InexactFilter)
- * - Promiscuous Mode
- * of ports.
- */
-
- for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) {
- MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i];
- pAC->Addr.Port[FromPortNumber].Exact[i] =
- pAC->Addr.Port[ToPortNumber].Exact[i];
- pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr;
- }
-
- for (i = 0; i < 8; i++) {
- Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i];
- pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] =
- pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i];
- pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte;
- }
-
- i = pAC->Addr.Port[FromPortNumber].PromMode;
- pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode;
- pAC->Addr.Port[ToPortNumber].PromMode = i;
-
- if (pAC->GIni.GIGenesis) {
- DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt;
- pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt =
- pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt;
- pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord;
-
- DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt;
- pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt =
- pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt;
- pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord;
-
- DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv;
- pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv =
- pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv;
- pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord;
-
- DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv;
- pAC->Addr.Port[FromPortNumber].NextExactMatchDrv =
- pAC->Addr.Port[ToPortNumber].NextExactMatchDrv;
- pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord;
- }
-
- /* CAUTION: Solution works if only ports of one adapter are in use. */
- for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].
- Net->NetNumber].NumPorts; i++) {
- if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
- Port[i]->PortNumber == ToPortNumber) {
- pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
- ActivePort = i;
- /* 20001207 RA: Was "ToPortNumber;". */
- }
- }
-
- (void) SkAddrMcUpdate(pAC, IoC, FromPortNumber);
- (void) SkAddrMcUpdate(pAC, IoC, ToPortNumber);
-
- return (SK_ADDR_SUCCESS);
-
-} /* SkAddrSwap */
-
-#endif /* !SK_SLIM */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c
deleted file mode 100644
index 37ce03fb8de32932b964952236426b8a8c4eb231..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/skdim.c
+++ /dev/null
@@ -1,742 +0,0 @@
-/******************************************************************************
- *
- * Name: skdim.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.5 $
- * Date: $Date: 2003/11/28 12:55:40 $
- * Purpose: All functions to maintain interrupt moderation
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage the dynamic interrupt moderation on both
- * GEnesis and Yukon adapters.
- *
- * Include File Hierarchy:
- *
- * "skdrv1st.h"
- * "skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef lint
-static const char SysKonnectFileId[] =
- "@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect.";
-#endif
-
-#define __SKADDR_C
-
-#ifdef __cplusplus
-#error C++ is not yet supported.
-extern "C" {
-#endif
-
-/*******************************************************************************
-**
-** Includes
-**
-*******************************************************************************/
-
-#ifndef __INC_SKDRV1ST_H
-#include "h/skdrv1st.h"
-#endif
-
-#ifndef __INC_SKDRV2ND_H
-#include "h/skdrv2nd.h"
-#endif
-
-#include
-
-/*******************************************************************************
-**
-** Defines
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Typedefs
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Local function prototypes
-**
-*******************************************************************************/
-
-static unsigned int GetCurrentSystemLoad(SK_AC *pAC);
-static SK_U64 GetIsrCalls(SK_AC *pAC);
-static SK_BOOL IsIntModEnabled(SK_AC *pAC);
-static void SetCurrIntCtr(SK_AC *pAC);
-static void EnableIntMod(SK_AC *pAC);
-static void DisableIntMod(SK_AC *pAC);
-static void ResizeDimTimerDuration(SK_AC *pAC);
-static void DisplaySelectedModerationType(SK_AC *pAC);
-static void DisplaySelectedModerationMask(SK_AC *pAC);
-static void DisplayDescrRatio(SK_AC *pAC);
-
-/*******************************************************************************
-**
-** Global variables
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Local variables
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Global functions
-**
-*******************************************************************************/
-
-/*******************************************************************************
-** Function : SkDimModerate
-** Description : Called in every ISR to check if moderation is to be applied
-** or not for the current number of interrupts
-** Programmer : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns : void (!)
-** Notes : -
-*******************************************************************************/
-
-void
-SkDimModerate(SK_AC *pAC) {
- unsigned int CurrSysLoad = 0; /* expressed in percent */
- unsigned int LoadIncrease = 0; /* expressed in percent */
- SK_U64 ThresholdInts = 0;
- SK_U64 IsrCallsPerSec = 0;
-
-#define M_DIMINFO pAC->DynIrqModInfo
-
- if (!IsIntModEnabled(pAC)) {
- if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
- CurrSysLoad = GetCurrentSystemLoad(pAC);
- if (CurrSysLoad > 75) {
- /*
- ** More than 75% total system load! Enable the moderation
- ** to shield the system against too many interrupts.
- */
- EnableIntMod(pAC);
- } else if (CurrSysLoad > M_DIMINFO.PrevSysLoad) {
- LoadIncrease = (CurrSysLoad - M_DIMINFO.PrevSysLoad);
- if (LoadIncrease > ((M_DIMINFO.PrevSysLoad *
- C_INT_MOD_ENABLE_PERCENTAGE) / 100)) {
- if (CurrSysLoad > 10) {
- /*
- ** More than 50% increase with respect to the
- ** previous load of the system. Most likely this
- ** is due to our ISR-proc...
- */
- EnableIntMod(pAC);
- }
- }
- } else {
- /*
- ** Neither too much system load at all nor too much increase
- ** with respect to the previous system load. Hence, we can leave
- ** the ISR-handling like it is without enabling moderation.
- */
- }
- M_DIMINFO.PrevSysLoad = CurrSysLoad;
- }
- } else {
- if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
- ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec *
- C_INT_MOD_DISABLE_PERCENTAGE) / 100);
- IsrCallsPerSec = GetIsrCalls(pAC);
- if (IsrCallsPerSec <= ThresholdInts) {
- /*
- ** The number of interrupts within the last second is
- ** lower than the disable_percentage of the desried
- ** maxrate. Therefore we can disable the moderation.
- */
- DisableIntMod(pAC);
- M_DIMINFO.MaxModIntsPerSec =
- (M_DIMINFO.MaxModIntsPerSecUpperLimit +
- M_DIMINFO.MaxModIntsPerSecLowerLimit) / 2;
- } else {
- /*
- ** The number of interrupts per sec is the same as expected.
- ** Evalulate the descriptor-ratio. If it has changed, a resize
- ** in the moderation timer might be useful
- */
- if (M_DIMINFO.AutoSizing) {
- ResizeDimTimerDuration(pAC);
- }
- }
- }
- }
-
- /*
- ** Some information to the log...
- */
- if (M_DIMINFO.DisplayStats) {
- DisplaySelectedModerationType(pAC);
- DisplaySelectedModerationMask(pAC);
- DisplayDescrRatio(pAC);
- }
-
- M_DIMINFO.NbrProcessedDescr = 0;
- SetCurrIntCtr(pAC);
-}
-
-/*******************************************************************************
-** Function : SkDimStartModerationTimer
-** Description : Starts the audit-timer for the dynamic interrupt moderation
-** Programmer : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns : void (!)
-** Notes : -
-*******************************************************************************/
-
-void
-SkDimStartModerationTimer(SK_AC *pAC) {
- SK_EVPARA EventParam; /* Event struct for timer event */
-
- SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
- EventParam.Para32[0] = SK_DRV_MODERATION_TIMER;
- SkTimerStart(pAC, pAC->IoBase, &pAC->DynIrqModInfo.ModTimer,
- SK_DRV_MODERATION_TIMER_LENGTH,
- SKGE_DRV, SK_DRV_TIMER, EventParam);
-}
-
-/*******************************************************************************
-** Function : SkDimEnableModerationIfNeeded
-** Description : Either enables or disables moderation
-** Programmer : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns : void (!)
-** Notes : This function is called when a particular adapter is opened
-** There is no Disable function, because when all interrupts
-** might be disable, the moderation timer has no meaning at all
-******************************************************************************/
-
-void
-SkDimEnableModerationIfNeeded(SK_AC *pAC) {
-
- if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_STATIC) {
- EnableIntMod(pAC); /* notification print in this function */
- } else if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
- SkDimStartModerationTimer(pAC);
- if (M_DIMINFO.DisplayStats) {
- printk("Dynamic moderation has been enabled\n");
- }
- } else {
- if (M_DIMINFO.DisplayStats) {
- printk("No moderation has been enabled\n");
- }
- }
-}
-
-/*******************************************************************************
-** Function : SkDimDisplayModerationSettings
-** Description : Displays the current settings regarding interrupt moderation
-** Programmer : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns : void (!)
-** Notes : -
-*******************************************************************************/
-
-void
-SkDimDisplayModerationSettings(SK_AC *pAC) {
- DisplaySelectedModerationType(pAC);
- DisplaySelectedModerationMask(pAC);
-}
-
-/*******************************************************************************
-**
-** Local functions
-**
-*******************************************************************************/
-
-/*******************************************************************************
-** Function : GetCurrentSystemLoad
-** Description : Retrieves the current system load of the system. This load
-** is evaluated for all processors within the system.
-** Programmer : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns : unsigned int: load expressed in percentage
-** Notes : The possible range being returned is from 0 up to 100.
-** Whereas 0 means 'no load at all' and 100 'system fully loaded'
-** It is impossible to determine what actually causes the system
-** to be in 100%, but maybe that is due to too much interrupts.
-*******************************************************************************/
-
-static unsigned int
-GetCurrentSystemLoad(SK_AC *pAC) {
- unsigned long jif = jiffies;
- unsigned int UserTime = 0;
- unsigned int SystemTime = 0;
- unsigned int NiceTime = 0;
- unsigned int IdleTime = 0;
- unsigned int TotalTime = 0;
- unsigned int UsedTime = 0;
- unsigned int SystemLoad = 0;
-
- /* unsigned int NbrCpu = 0; */
-
- /*
- ** The following lines have been commented out, because
- ** from kernel 2.5.44 onwards, the kernel-owned structure
- **
- ** struct kernel_stat kstat
- **
- ** is not marked as an exported symbol in the file
- **
- ** kernel/ksyms.c
- **
- ** As a consequence, using this driver as KLM is not possible
- ** and any access of the structure kernel_stat via the
- ** dedicated macros kstat_cpu(i).cpustat.xxx is to be avoided.
- **
- ** The kstat-information might be added again in future
- ** versions of the 2.5.xx kernel, but for the time being,
- ** number of interrupts will serve as indication how much
- ** load we currently have...
- **
- ** for (NbrCpu = 0; NbrCpu < num_online_cpus(); NbrCpu++) {
- ** UserTime = UserTime + kstat_cpu(NbrCpu).cpustat.user;
- ** NiceTime = NiceTime + kstat_cpu(NbrCpu).cpustat.nice;
- ** SystemTime = SystemTime + kstat_cpu(NbrCpu).cpustat.system;
- ** }
- */
- SK_U64 ThresholdInts = 0;
- SK_U64 IsrCallsPerSec = 0;
-
- ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec *
- C_INT_MOD_ENABLE_PERCENTAGE) + 100);
- IsrCallsPerSec = GetIsrCalls(pAC);
- if (IsrCallsPerSec >= ThresholdInts) {
- /*
- ** We do not know how much the real CPU-load is!
- ** Return 80% as a default in order to activate DIM
- */
- SystemLoad = 80;
- return (SystemLoad);
- }
-
- UsedTime = UserTime + NiceTime + SystemTime;
-
- IdleTime = jif * num_online_cpus() - UsedTime;
- TotalTime = UsedTime + IdleTime;
-
- SystemLoad = ( 100 * (UsedTime - M_DIMINFO.PrevUsedTime) ) /
- (TotalTime - M_DIMINFO.PrevTotalTime);
-
- if (M_DIMINFO.DisplayStats) {
- printk("Current system load is: %u\n", SystemLoad);
- }
-
- M_DIMINFO.PrevTotalTime = TotalTime;
- M_DIMINFO.PrevUsedTime = UsedTime;
-
- return (SystemLoad);
-}
-
-/*******************************************************************************
-** Function : GetIsrCalls
-** Description : Depending on the selected moderation mask, this function will
-** return the number of interrupts handled in the previous time-
-** frame. This evaluated number is based on the current number
-** of interrupts stored in PNMI-context and the previous stored
-** interrupts.
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : int: the number of interrupts being executed in the last
-** timeframe
-** Notes : It makes only sense to call this function, when dynamic
-** interrupt moderation is applied
-*******************************************************************************/
-
-static SK_U64
-GetIsrCalls(SK_AC *pAC) {
- SK_U64 RxPort0IntDiff = 0;
- SK_U64 RxPort1IntDiff = 0;
- SK_U64 TxPort0IntDiff = 0;
- SK_U64 TxPort1IntDiff = 0;
-
- if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_TX_ONLY) {
- if (pAC->GIni.GIMacsFound == 2) {
- TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts -
- pAC->DynIrqModInfo.PrevPort1TxIntrCts;
- }
- TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts -
- pAC->DynIrqModInfo.PrevPort0TxIntrCts;
- } else if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_RX_ONLY) {
- if (pAC->GIni.GIMacsFound == 2) {
- RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts -
- pAC->DynIrqModInfo.PrevPort1RxIntrCts;
- }
- RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts -
- pAC->DynIrqModInfo.PrevPort0RxIntrCts;
- } else {
- if (pAC->GIni.GIMacsFound == 2) {
- RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts -
- pAC->DynIrqModInfo.PrevPort1RxIntrCts;
- TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts -
- pAC->DynIrqModInfo.PrevPort1TxIntrCts;
- }
- RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts -
- pAC->DynIrqModInfo.PrevPort0RxIntrCts;
- TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts -
- pAC->DynIrqModInfo.PrevPort0TxIntrCts;
- }
-
- return (RxPort0IntDiff + RxPort1IntDiff + TxPort0IntDiff + TxPort1IntDiff);
-}
-
-/*******************************************************************************
-** Function : GetRxCalls
-** Description : This function will return the number of times a receive inter-
-** rupt was processed. This is needed to evaluate any resizing
-** factor.
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : SK_U64: the number of RX-ints being processed
-** Notes : It makes only sense to call this function, when dynamic
-** interrupt moderation is applied
-*******************************************************************************/
-
-static SK_U64
-GetRxCalls(SK_AC *pAC) {
- SK_U64 RxPort0IntDiff = 0;
- SK_U64 RxPort1IntDiff = 0;
-
- if (pAC->GIni.GIMacsFound == 2) {
- RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts -
- pAC->DynIrqModInfo.PrevPort1RxIntrCts;
- }
- RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts -
- pAC->DynIrqModInfo.PrevPort0RxIntrCts;
-
- return (RxPort0IntDiff + RxPort1IntDiff);
-}
-
-/*******************************************************************************
-** Function : SetCurrIntCtr
-** Description : Will store the current number orf occured interrupts in the
-** adapter context. This is needed to evaluated the number of
-** interrupts within a current timeframe.
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : void (!)
-** Notes : -
-*******************************************************************************/
-
-static void
-SetCurrIntCtr(SK_AC *pAC) {
- if (pAC->GIni.GIMacsFound == 2) {
- pAC->DynIrqModInfo.PrevPort1RxIntrCts = pAC->Pnmi.Port[1].RxIntrCts;
- pAC->DynIrqModInfo.PrevPort1TxIntrCts = pAC->Pnmi.Port[1].TxIntrCts;
- }
- pAC->DynIrqModInfo.PrevPort0RxIntrCts = pAC->Pnmi.Port[0].RxIntrCts;
- pAC->DynIrqModInfo.PrevPort0TxIntrCts = pAC->Pnmi.Port[0].TxIntrCts;
-}
-
-/*******************************************************************************
-** Function : IsIntModEnabled()
-** Description : Retrieves the current value of the interrupts moderation
-** command register. Its content determines whether any
-** moderation is running or not.
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : SK_TRUE : if mod timer running
-** SK_FALSE : if no moderation is being performed
-** Notes : -
-*******************************************************************************/
-
-static SK_BOOL
-IsIntModEnabled(SK_AC *pAC) {
- unsigned long CtrCmd;
-
- SK_IN32(pAC->IoBase, B2_IRQM_CTRL, &CtrCmd);
- if ((CtrCmd & TIM_START) == TIM_START) {
- return SK_TRUE;
- } else {
- return SK_FALSE;
- }
-}
-
-/*******************************************************************************
-** Function : EnableIntMod()
-** Description : Enables the interrupt moderation using the values stored in
-** in the pAC->DynIntMod data structure
-** Programmer : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns : -
-** Notes : -
-*******************************************************************************/
-
-static void
-EnableIntMod(SK_AC *pAC) {
- unsigned long ModBase;
-
- if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
- ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec;
- } else {
- ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec;
- }
-
- SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
- SK_OUT32(pAC->IoBase, B2_IRQM_MSK, pAC->DynIrqModInfo.MaskIrqModeration);
- SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
- if (M_DIMINFO.DisplayStats) {
- printk("Enabled interrupt moderation (%i ints/sec)\n",
- M_DIMINFO.MaxModIntsPerSec);
- }
-}
-
-/*******************************************************************************
-** Function : DisableIntMod()
-** Description : Disables the interrupt moderation independent of what inter-
-** rupts are running or not
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : -
-** Notes : -
-*******************************************************************************/
-
-static void
-DisableIntMod(SK_AC *pAC) {
-
- SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_STOP);
- if (M_DIMINFO.DisplayStats) {
- printk("Disabled interrupt moderation\n");
- }
-}
-
-/*******************************************************************************
-** Function : ResizeDimTimerDuration();
-** Description : Checks the current used descriptor ratio and resizes the
-** duration timer (longer/smaller) if possible.
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : -
-** Notes : There are both maximum and minimum timer duration value.
-** This function assumes that interrupt moderation is already
-** enabled!
-*******************************************************************************/
-
-static void
-ResizeDimTimerDuration(SK_AC *pAC) {
- SK_BOOL IncreaseTimerDuration;
- int TotalMaxNbrDescr;
- int UsedDescrRatio;
- int RatioDiffAbs;
- int RatioDiffRel;
- int NewMaxModIntsPerSec;
- int ModAdjValue;
- long ModBase;
-
- /*
- ** Check first if we are allowed to perform any modification
- */
- if (IsIntModEnabled(pAC)) {
- if (M_DIMINFO.IntModTypeSelect != C_INT_MOD_DYNAMIC) {
- return;
- } else {
- if (M_DIMINFO.ModJustEnabled) {
- M_DIMINFO.ModJustEnabled = SK_FALSE;
- return;
- }
- }
- }
-
- /*
- ** If we got until here, we have to evaluate the amount of the
- ** descriptor ratio change...
- */
- TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC);
- UsedDescrRatio = (M_DIMINFO.NbrProcessedDescr * 100) / TotalMaxNbrDescr;
-
- if (UsedDescrRatio > M_DIMINFO.PrevUsedDescrRatio) {
- RatioDiffAbs = (UsedDescrRatio - M_DIMINFO.PrevUsedDescrRatio);
- RatioDiffRel = (RatioDiffAbs * 100) / UsedDescrRatio;
- M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
- IncreaseTimerDuration = SK_FALSE; /* in other words: DECREASE */
- } else if (UsedDescrRatio < M_DIMINFO.PrevUsedDescrRatio) {
- RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio);
- RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio;
- M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
- IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */
- } else {
- RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio);
- RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio;
- M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
- IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */
- }
-
- /*
- ** Now we can determine the change in percent
- */
- if ((RatioDiffRel >= 0) && (RatioDiffRel <= 5) ) {
- ModAdjValue = 1; /* 1% change - maybe some other value in future */
- } else if ((RatioDiffRel > 5) && (RatioDiffRel <= 10) ) {
- ModAdjValue = 1; /* 1% change - maybe some other value in future */
- } else if ((RatioDiffRel > 10) && (RatioDiffRel <= 15) ) {
- ModAdjValue = 1; /* 1% change - maybe some other value in future */
- } else {
- ModAdjValue = 1; /* 1% change - maybe some other value in future */
- }
-
- if (IncreaseTimerDuration) {
- NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec +
- (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100;
- } else {
- NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec -
- (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100;
- }
-
- /*
- ** Check if we exceed boundaries...
- */
- if ( (NewMaxModIntsPerSec > M_DIMINFO.MaxModIntsPerSecUpperLimit) ||
- (NewMaxModIntsPerSec < M_DIMINFO.MaxModIntsPerSecLowerLimit)) {
- if (M_DIMINFO.DisplayStats) {
- printk("Cannot change ModTim from %i to %i ints/sec\n",
- M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec);
- }
- return;
- } else {
- if (M_DIMINFO.DisplayStats) {
- printk("Resized ModTim from %i to %i ints/sec\n",
- M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec);
- }
- }
-
- M_DIMINFO.MaxModIntsPerSec = NewMaxModIntsPerSec;
-
- if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
- ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec;
- } else {
- ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec;
- }
-
- /*
- ** We do not need to touch any other registers
- */
- SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
-}
-
-/*******************************************************************************
-** Function : DisplaySelectedModerationType()
-** Description : Displays what type of moderation we have
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : void!
-** Notes : -
-*******************************************************************************/
-
-static void
-DisplaySelectedModerationType(SK_AC *pAC) {
-
- if (pAC->DynIrqModInfo.DisplayStats) {
- if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) {
- printk("Static int moderation runs with %i INTS/sec\n",
- pAC->DynIrqModInfo.MaxModIntsPerSec);
- } else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
- if (IsIntModEnabled(pAC)) {
- printk("Dynamic int moderation runs with %i INTS/sec\n",
- pAC->DynIrqModInfo.MaxModIntsPerSec);
- } else {
- printk("Dynamic int moderation currently not applied\n");
- }
- } else {
- printk("No interrupt moderation selected!\n");
- }
- }
-}
-
-/*******************************************************************************
-** Function : DisplaySelectedModerationMask()
-** Description : Displays what interrupts are moderated
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : void!
-** Notes : -
-*******************************************************************************/
-
-static void
-DisplaySelectedModerationMask(SK_AC *pAC) {
-
- if (pAC->DynIrqModInfo.DisplayStats) {
- if (pAC->DynIrqModInfo.IntModTypeSelect != C_INT_MOD_NONE) {
- switch (pAC->DynIrqModInfo.MaskIrqModeration) {
- case IRQ_MASK_TX_ONLY:
- printk("Only Tx-interrupts are moderated\n");
- break;
- case IRQ_MASK_RX_ONLY:
- printk("Only Rx-interrupts are moderated\n");
- break;
- case IRQ_MASK_SP_ONLY:
- printk("Only special-interrupts are moderated\n");
- break;
- case IRQ_MASK_TX_RX:
- printk("Tx- and Rx-interrupts are moderated\n");
- break;
- case IRQ_MASK_SP_RX:
- printk("Special- and Rx-interrupts are moderated\n");
- break;
- case IRQ_MASK_SP_TX:
- printk("Special- and Tx-interrupts are moderated\n");
- break;
- case IRQ_MASK_RX_TX_SP:
- printk("All Rx-, Tx and special-interrupts are moderated\n");
- break;
- default:
- printk("Don't know what is moderated\n");
- break;
- }
- } else {
- printk("No specific interrupts masked for moderation\n");
- }
- }
-}
-
-/*******************************************************************************
-** Function : DisplayDescrRatio
-** Description : Like the name states...
-** Programmer : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns : void!
-** Notes : -
-*******************************************************************************/
-
-static void
-DisplayDescrRatio(SK_AC *pAC) {
- int TotalMaxNbrDescr = 0;
-
- if (pAC->DynIrqModInfo.DisplayStats) {
- TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC);
- printk("Ratio descriptors: %i/%i\n",
- M_DIMINFO.NbrProcessedDescr, TotalMaxNbrDescr);
- }
-}
-
-/*******************************************************************************
-**
-** End of file
-**
-*******************************************************************************/
diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c
deleted file mode 100644
index 5a6da8950faa7c63e3aa7360bc44bf78850b92a6..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/skethtool.c
+++ /dev/null
@@ -1,627 +0,0 @@
-/******************************************************************************
- *
- * Name: skethtool.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.7 $
- * Date: $Date: 2004/09/29 13:32:07 $
- * Purpose: All functions regarding ethtool handling
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2004 Marvell.
- *
- * Driver for Marvell Yukon/2 chipset and SysKonnect Gigabit Ethernet
- * Server Adapters.
- *
- * Author: Ralph Roesler (rroesler@syskonnect.de)
- * Mirko Lindner (mlindner@syskonnect.de)
- *
- * Address all question to: linux@syskonnect.de
- *
- * The technical manual for the adapters is available from SysKonnect's
- * web pages: www.syskonnect.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- *****************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-#include "h/skversion.h"
-
-#include
-#include
-#include
-
-/******************************************************************************
- *
- * Defines
- *
- *****************************************************************************/
-
-#define SUPP_COPPER_ALL (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_1000baseT_Half| SUPPORTED_1000baseT_Full| \
- SUPPORTED_TP)
-
-#define ADV_COPPER_ALL (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
- ADVERTISED_1000baseT_Half| ADVERTISED_1000baseT_Full| \
- ADVERTISED_TP)
-
-#define SUPP_FIBRE_ALL (SUPPORTED_1000baseT_Full | \
- SUPPORTED_FIBRE | \
- SUPPORTED_Autoneg)
-
-#define ADV_FIBRE_ALL (ADVERTISED_1000baseT_Full | \
- ADVERTISED_FIBRE | \
- ADVERTISED_Autoneg)
-
-
-/******************************************************************************
- *
- * Local Functions
- *
- *****************************************************************************/
-
-/*****************************************************************************
- *
- * getSettings - retrieves the current settings of the selected adapter
- *
- * Description:
- * The current configuration of the selected adapter is returned.
- * This configuration involves a)speed, b)duplex and c)autoneg plus
- * a number of other variables.
- *
- * Returns: always 0
- *
- */
-static int getSettings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
- const DEV_NET *pNet = netdev_priv(dev);
- int port = pNet->PortNr;
- const SK_AC *pAC = pNet->pAC;
- const SK_GEPORT *pPort = &pAC->GIni.GP[port];
-
- static int DuplexAutoNegConfMap[9][3]= {
- { -1 , -1 , -1 },
- { 0 , -1 , -1 },
- { SK_LMODE_HALF , DUPLEX_HALF, AUTONEG_DISABLE },
- { SK_LMODE_FULL , DUPLEX_FULL, AUTONEG_DISABLE },
- { SK_LMODE_AUTOHALF , DUPLEX_HALF, AUTONEG_ENABLE },
- { SK_LMODE_AUTOFULL , DUPLEX_FULL, AUTONEG_ENABLE },
- { SK_LMODE_AUTOBOTH , DUPLEX_FULL, AUTONEG_ENABLE },
- { SK_LMODE_AUTOSENSE , -1 , -1 },
- { SK_LMODE_INDETERMINATED, -1 , -1 }
- };
- static int SpeedConfMap[6][2] = {
- { 0 , -1 },
- { SK_LSPEED_AUTO , -1 },
- { SK_LSPEED_10MBPS , SPEED_10 },
- { SK_LSPEED_100MBPS , SPEED_100 },
- { SK_LSPEED_1000MBPS , SPEED_1000 },
- { SK_LSPEED_INDETERMINATED, -1 }
- };
- static int AdvSpeedMap[6][2] = {
- { 0 , -1 },
- { SK_LSPEED_AUTO , -1 },
- { SK_LSPEED_10MBPS , ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full },
- { SK_LSPEED_100MBPS , ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full },
- { SK_LSPEED_1000MBPS , ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full},
- { SK_LSPEED_INDETERMINATED, -1 }
- };
-
- ecmd->phy_address = port;
- ecmd->speed = SpeedConfMap[pPort->PLinkSpeedUsed][1];
- ecmd->duplex = DuplexAutoNegConfMap[pPort->PLinkModeStatus][1];
- ecmd->autoneg = DuplexAutoNegConfMap[pPort->PLinkModeStatus][2];
- ecmd->transceiver = XCVR_INTERNAL;
-
- if (pAC->GIni.GICopperType) {
- ecmd->port = PORT_TP;
- ecmd->supported = (SUPP_COPPER_ALL|SUPPORTED_Autoneg);
- if (pAC->GIni.GIGenesis) {
- ecmd->supported &= ~(SUPPORTED_10baseT_Half);
- ecmd->supported &= ~(SUPPORTED_10baseT_Full);
- ecmd->supported &= ~(SUPPORTED_100baseT_Half);
- ecmd->supported &= ~(SUPPORTED_100baseT_Full);
- } else {
- if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
- ecmd->supported &= ~(SUPPORTED_1000baseT_Half);
- }
-#ifdef CHIP_ID_YUKON_FE
- if (pAC->GIni.GIChipId == CHIP_ID_YUKON_FE) {
- ecmd->supported &= ~(SUPPORTED_1000baseT_Half);
- ecmd->supported &= ~(SUPPORTED_1000baseT_Full);
- }
-#endif
- }
- if (pAC->GIni.GP[0].PLinkSpeed != SK_LSPEED_AUTO) {
- ecmd->advertising = AdvSpeedMap[pPort->PLinkSpeed][1];
- if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
- ecmd->advertising &= ~(SUPPORTED_1000baseT_Half);
- }
- } else {
- ecmd->advertising = ecmd->supported;
- }
-
- if (ecmd->autoneg == AUTONEG_ENABLE)
- ecmd->advertising |= ADVERTISED_Autoneg;
- } else {
- ecmd->port = PORT_FIBRE;
- ecmd->supported = SUPP_FIBRE_ALL;
- ecmd->advertising = ADV_FIBRE_ALL;
- }
- return 0;
-}
-
-/*
- * MIB infrastructure uses instance value starting at 1
- * based on board and port.
- */
-static inline u32 pnmiInstance(const DEV_NET *pNet)
-{
- return 1 + (pNet->pAC->RlmtNets == 2) + pNet->PortNr;
-}
-
-/*****************************************************************************
- *
- * setSettings - configures the settings of a selected adapter
- *
- * Description:
- * Possible settings that may be altered are a)speed, b)duplex or
- * c)autonegotiation.
- *
- * Returns:
- * 0: everything fine, no error
- * <0: the return value is the error code of the failure
- */
-static int setSettings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
- u32 instance;
- char buf[4];
- int len = 1;
-
- if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100
- && ecmd->speed != SPEED_1000)
- return -EINVAL;
-
- if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
- return -EINVAL;
-
- if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
- return -EINVAL;
-
- if (ecmd->autoneg == AUTONEG_DISABLE)
- *buf = (ecmd->duplex == DUPLEX_FULL)
- ? SK_LMODE_FULL : SK_LMODE_HALF;
- else
- *buf = (ecmd->duplex == DUPLEX_FULL)
- ? SK_LMODE_AUTOFULL : SK_LMODE_AUTOHALF;
-
- instance = pnmiInstance(pNet);
- if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_LINK_MODE,
- &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK)
- return -EINVAL;
-
- switch(ecmd->speed) {
- case SPEED_1000:
- *buf = SK_LSPEED_1000MBPS;
- break;
- case SPEED_100:
- *buf = SK_LSPEED_100MBPS;
- break;
- case SPEED_10:
- *buf = SK_LSPEED_10MBPS;
- }
-
- if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE,
- &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK)
- return -EINVAL;
-
- return 0;
-}
-
-/*****************************************************************************
- *
- * getDriverInfo - returns generic driver and adapter information
- *
- * Description:
- * Generic driver information is returned via this function, such as
- * the name of the driver, its version and and firmware version.
- * In addition to this, the location of the selected adapter is
- * returned as a bus info string (e.g. '01:05.0').
- *
- * Returns: N/A
- *
- */
-static void getDriverInfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- const DEV_NET *pNet = netdev_priv(dev);
- const SK_AC *pAC = pNet->pAC;
- char vers[32];
-
- snprintf(vers, sizeof(vers)-1, VER_STRING "(v%d.%d)",
- (pAC->GIni.GIPciHwRev >> 4) & 0xf, pAC->GIni.GIPciHwRev & 0xf);
-
- strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver));
- strcpy(info->version, vers);
- strcpy(info->fw_version, "N/A");
- strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN);
-}
-
-/*
- * Ethtool statistics support.
- */
-static const char StringsStats[][ETH_GSTRING_LEN] = {
- "rx_packets", "tx_packets",
- "rx_bytes", "tx_bytes",
- "rx_errors", "tx_errors",
- "rx_dropped", "tx_dropped",
- "multicasts", "collisions",
- "rx_length_errors", "rx_buffer_overflow_errors",
- "rx_crc_errors", "rx_frame_errors",
- "rx_too_short_errors", "rx_too_long_errors",
- "rx_carrier_extension_errors", "rx_symbol_errors",
- "rx_llc_mac_size_errors", "rx_carrier_errors",
- "rx_jabber_errors", "rx_missed_errors",
- "tx_abort_collision_errors", "tx_carrier_errors",
- "tx_buffer_underrun_errors", "tx_heartbeat_errors",
- "tx_window_errors",
-};
-
-static int getStatsCount(struct net_device *dev)
-{
- return ARRAY_SIZE(StringsStats);
-}
-
-static void getStrings(struct net_device *dev, u32 stringset, u8 *data)
-{
- switch(stringset) {
- case ETH_SS_STATS:
- memcpy(data, *StringsStats, sizeof(StringsStats));
- break;
- }
-}
-
-static void getEthtoolStats(struct net_device *dev,
- struct ethtool_stats *stats, u64 *data)
-{
- const DEV_NET *pNet = netdev_priv(dev);
- const SK_AC *pAC = pNet->pAC;
- const SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct;
-
- *data++ = pPnmiStruct->Stat[0].StatRxOkCts;
- *data++ = pPnmiStruct->Stat[0].StatTxOkCts;
- *data++ = pPnmiStruct->Stat[0].StatRxOctetsOkCts;
- *data++ = pPnmiStruct->Stat[0].StatTxOctetsOkCts;
- *data++ = pPnmiStruct->InErrorsCts;
- *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts;
- *data++ = pPnmiStruct->RxNoBufCts;
- *data++ = pPnmiStruct->TxNoBufCts;
- *data++ = pPnmiStruct->Stat[0].StatRxMulticastOkCts;
- *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts;
- *data++ = pPnmiStruct->Stat[0].StatRxRuntCts;
- *data++ = pPnmiStruct->Stat[0].StatRxFifoOverflowCts;
- *data++ = pPnmiStruct->Stat[0].StatRxFcsCts;
- *data++ = pPnmiStruct->Stat[0].StatRxFramingCts;
- *data++ = pPnmiStruct->Stat[0].StatRxShortsCts;
- *data++ = pPnmiStruct->Stat[0].StatRxTooLongCts;
- *data++ = pPnmiStruct->Stat[0].StatRxCextCts;
- *data++ = pPnmiStruct->Stat[0].StatRxSymbolCts;
- *data++ = pPnmiStruct->Stat[0].StatRxIRLengthCts;
- *data++ = pPnmiStruct->Stat[0].StatRxCarrierCts;
- *data++ = pPnmiStruct->Stat[0].StatRxJabberCts;
- *data++ = pPnmiStruct->Stat[0].StatRxMissedCts;
- *data++ = pAC->stats.tx_aborted_errors;
- *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts;
- *data++ = pPnmiStruct->Stat[0].StatTxFifoUnderrunCts;
- *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts;
- *data++ = pAC->stats.tx_window_errors;
-}
-
-
-/*****************************************************************************
- *
- * toggleLeds - Changes the LED state of an adapter
- *
- * Description:
- * This function changes the current state of all LEDs of an adapter so
- * that it can be located by a user.
- *
- * Returns: N/A
- *
- */
-static void toggleLeds(DEV_NET *pNet, int on)
-{
- SK_AC *pAC = pNet->pAC;
- int port = pNet->PortNr;
- void __iomem *io = pAC->IoBase;
-
- if (pAC->GIni.GIGenesis) {
- SK_OUT8(io, MR_ADDR(port,LNK_LED_REG),
- on ? SK_LNK_ON : SK_LNK_OFF);
- SkGeYellowLED(pAC, io,
- on ? (LED_ON >> 1) : (LED_OFF >> 1));
- SkGeXmitLED(pAC, io, MR_ADDR(port,RX_LED_INI),
- on ? SK_LED_TST : SK_LED_DIS);
-
- if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM)
- SkXmPhyWrite(pAC, io, port, PHY_BCOM_P_EXT_CTRL,
- on ? PHY_B_PEC_LED_ON : PHY_B_PEC_LED_OFF);
- else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE)
- SkXmPhyWrite(pAC, io, port, PHY_LONE_LED_CFG,
- on ? 0x0800 : PHY_L_LC_LEDT);
- else
- SkGeXmitLED(pAC, io, MR_ADDR(port,TX_LED_INI),
- on ? SK_LED_TST : SK_LED_DIS);
- } else {
- const u16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON) |
- PHY_M_LED_MO_10(MO_LED_ON) |
- PHY_M_LED_MO_100(MO_LED_ON) |
- PHY_M_LED_MO_1000(MO_LED_ON) |
- PHY_M_LED_MO_RX(MO_LED_ON));
- const u16 YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF) |
- PHY_M_LED_MO_10(MO_LED_OFF) |
- PHY_M_LED_MO_100(MO_LED_OFF) |
- PHY_M_LED_MO_1000(MO_LED_OFF) |
- PHY_M_LED_MO_RX(MO_LED_OFF));
-
-
- SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_CTRL,0);
- SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_OVER,
- on ? YukLedOn : YukLedOff);
- }
-}
-
-/*****************************************************************************
- *
- * skGeBlinkTimer - Changes the LED state of an adapter
- *
- * Description:
- * This function changes the current state of all LEDs of an adapter so
- * that it can be located by a user. If the requested time interval for
- * this test has elapsed, this function cleans up everything that was
- * temporarily setup during the locate NIC test. This involves of course
- * also closing or opening any adapter so that the initial board state
- * is recovered.
- *
- * Returns: N/A
- *
- */
-void SkGeBlinkTimer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
-
- toggleLeds(pNet, pAC->LedsOn);
-
- pAC->LedsOn = !pAC->LedsOn;
- mod_timer(&pAC->BlinkTimer, jiffies + HZ/4);
-}
-
-/*****************************************************************************
- *
- * locateDevice - start the locate NIC feature of the elected adapter
- *
- * Description:
- * This function is used if the user want to locate a particular NIC.
- * All LEDs are regularly switched on and off, so the NIC can easily
- * be identified.
- *
- * Returns:
- * ==0: everything fine, no error, locateNIC test was started
- * !=0: one locateNIC test runs already
- *
- */
-static int locateDevice(struct net_device *dev, u32 data)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
-
- if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
-
- /* start blinking */
- pAC->LedsOn = 0;
- mod_timer(&pAC->BlinkTimer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&pAC->BlinkTimer);
- toggleLeds(pNet, 0);
-
- return 0;
-}
-
-/*****************************************************************************
- *
- * getPauseParams - retrieves the pause parameters
- *
- * Description:
- * All current pause parameters of a selected adapter are placed
- * in the passed ethtool_pauseparam structure and are returned.
- *
- * Returns: N/A
- *
- */
-static void getPauseParams(struct net_device *dev, struct ethtool_pauseparam *epause)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
- SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr];
-
- epause->rx_pause = (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC) ||
- (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM);
-
- epause->tx_pause = epause->rx_pause || (pPort->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND);
- epause->autoneg = epause->rx_pause || epause->tx_pause;
-}
-
-/*****************************************************************************
- *
- * setPauseParams - configures the pause parameters of an adapter
- *
- * Description:
- * This function sets the Rx or Tx pause parameters
- *
- * Returns:
- * ==0: everything fine, no error
- * !=0: the return value is the error code of the failure
- */
-static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *epause)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
- SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr];
- u32 instance = pnmiInstance(pNet);
- struct ethtool_pauseparam old;
- u8 oldspeed = pPort->PLinkSpeedUsed;
- char buf[4];
- int len = 1;
- int ret;
-
- /*
- ** we have to determine the current settings to see if
- ** the operator requested any modification of the flow
- ** control parameters...
- */
- getPauseParams(dev, &old);
-
- /*
- ** perform modifications regarding the changes
- ** requested by the operator
- */
- if (epause->autoneg != old.autoneg)
- *buf = epause->autoneg ? SK_FLOW_MODE_NONE : SK_FLOW_MODE_SYMMETRIC;
- else {
- if (epause->rx_pause && epause->tx_pause)
- *buf = SK_FLOW_MODE_SYMMETRIC;
- else if (epause->rx_pause && !epause->tx_pause)
- *buf = SK_FLOW_MODE_SYM_OR_REM;
- else if (!epause->rx_pause && epause->tx_pause)
- *buf = SK_FLOW_MODE_LOC_SEND;
- else
- *buf = SK_FLOW_MODE_NONE;
- }
-
- ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_FLOWCTRL_MODE,
- &buf, &len, instance, pNet->NetNr);
-
- if (ret != SK_PNMI_ERR_OK) {
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL,
- ("ethtool (sk98lin): error changing rx/tx pause (%i)\n", ret));
- goto err;
- }
-
- /*
- ** It may be that autoneg has been disabled! Therefore
- ** set the speed to the previously used value...
- */
- if (!epause->autoneg) {
- len = 1;
- ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE,
- &oldspeed, &len, instance, pNet->NetNr);
- if (ret != SK_PNMI_ERR_OK)
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL,
- ("ethtool (sk98lin): error setting speed (%i)\n", ret));
- }
- err:
- return ret ? -EIO : 0;
-}
-
-/* Only Yukon supports checksum offload. */
-static int setScatterGather(struct net_device *dev, u32 data)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
-
- if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
- return -EOPNOTSUPP;
- return ethtool_op_set_sg(dev, data);
-}
-
-static int setTxCsum(struct net_device *dev, u32 data)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
-
- if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
- return -EOPNOTSUPP;
-
- return ethtool_op_set_tx_csum(dev, data);
-}
-
-static u32 getRxCsum(struct net_device *dev)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
-
- return pAC->RxPort[pNet->PortNr].RxCsum;
-}
-
-static int setRxCsum(struct net_device *dev, u32 data)
-{
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
-
- if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
- return -EOPNOTSUPP;
-
- pAC->RxPort[pNet->PortNr].RxCsum = data != 0;
- return 0;
-}
-
-static int getRegsLen(struct net_device *dev)
-{
- return 0x4000;
-}
-
-/*
- * Returns copy of whole control register region
- * Note: skip RAM address register because accessing it will
- * cause bus hangs!
- */
-static void getRegs(struct net_device *dev, struct ethtool_regs *regs,
- void *p)
-{
- DEV_NET *pNet = netdev_priv(dev);
- const void __iomem *io = pNet->pAC->IoBase;
-
- regs->version = 1;
- memset(p, 0, regs->len);
- memcpy_fromio(p, io, B3_RAM_ADDR);
-
- memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
- regs->len - B3_RI_WTO_R1);
-}
-
-const struct ethtool_ops SkGeEthtoolOps = {
- .get_settings = getSettings,
- .set_settings = setSettings,
- .get_drvinfo = getDriverInfo,
- .get_strings = getStrings,
- .get_stats_count = getStatsCount,
- .get_ethtool_stats = getEthtoolStats,
- .phys_id = locateDevice,
- .get_pauseparam = getPauseParams,
- .set_pauseparam = setPauseParams,
- .get_link = ethtool_op_get_link,
- .get_sg = ethtool_op_get_sg,
- .set_sg = setScatterGather,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = setTxCsum,
- .get_rx_csum = getRxCsum,
- .set_rx_csum = setRxCsum,
- .get_regs = getRegs,
- .get_regs_len = getRegsLen,
-};
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
deleted file mode 100644
index 20890e44f99a5be1d31b06713122b4f8f3267f01..0000000000000000000000000000000000000000
--- a/drivers/net/sk98lin/skge.c
+++ /dev/null
@@ -1,5218 +0,0 @@
-/******************************************************************************
- *
- * Name: skge.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.45 $
- * Date: $Date: 2004/02/12 14:41:02 $
- * Purpose: The main driver source module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet
- * Server Adapters.
- *
- * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and
- * SysKonnects GEnesis Solaris driver
- * Author: Christoph Goos (cgoos@syskonnect.de)
- * Mirko Lindner (mlindner@syskonnect.de)
- *
- * Address all question to: linux@syskonnect.de
- *
- * The technical manual for the adapters is available from SysKonnect's
- * web pages: www.syskonnect.com
- * Goto "Support" and search Knowledge Base for "manual".
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Possible compiler options (#define xxx / -Dxxx):
- *
- * debugging can be enable by changing SK_DEBUG_CHKMOD and
- * SK_DEBUG_CHKCAT in makefile (described there).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the main module of the Linux GE driver.
- *
- * All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h
- * are part of SysKonnect's COMMON MODULES for the SK-98xx adapters.
- * Those are used for drivers on multiple OS', so some thing may seem
- * unnecessary complicated on Linux. Please do not try to 'clean up'
- * them without VERY good reasons, because this will make it more
- * difficult to keep the Linux driver in synchronisation with the
- * other versions.
- *
- * Include file hierarchy:
- *
- *
- *
- * "h/skdrv1st.h"
- *
- *
- *
- *
- *
- *
- *
- *
- *
- *
- *
- *
- *
- *
- * those three depending on kernel version used:
- *
- *
- *
- *
- *
- * "h/skerror.h"
- * "h/skdebug.h"
- * "h/sktypes.h"
- * "h/lm80.h"
- * "h/xmac_ii.h"
- *
- * "h/skdrv2nd.h"
- * "h/skqueue.h"
- * "h/skgehwt.h"
- * "h/sktimer.h"
- * "h/ski2c.h"
- * "h/skgepnmi.h"
- * "h/skvpd.h"
- * "h/skgehw.h"
- * "h/skgeinit.h"
- * "h/skaddr.h"
- * "h/skgesirq.h"
- * "h/skrlmt.h"
- *
- ******************************************************************************/
-
-#include "h/skversion.h"
-
-#include
-#include
-#include
-#include